Scribd Logo
Upload

Welcome to Scribd!

  • 138 views

    DTHC.121413.ISB.00H (Working Conditions)

    Uploaded by

    tmtt44
    This document provides specifications for an intermediate shaft bearing model CEDN 235. It details the bearing's geometrical data, operating conditions, tolerances, recommended lubricant, surface quality requirements, and calculated operating limits. Graphs show how factors like excentricity, attitude angle, friction, power lost, temperature, and cooling water requirements vary with revolutions per minute.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    DTHC.121413.ISB.00H (Working Conditions)

    Uploaded by

    tmtt44
    138 views4 pages
    This document provides specifications for an intermediate shaft bearing model CEDN 235. It details the bearing's geometrical data, operating conditions, tolerances, recommended lubricant, surface quality requirements, and calculated operating limits. Graphs show how factors like excentricity, attitude angle, friction, power lost, temperature, and cooling water requirements vary with revolutions per minute.

    Original Description:

    Working Conditions

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for an intermediate shaft bearing model CEDN 235. It details the bearing's geometrical data, operating conditions, tolerances, recommended lubricant, surface quality requirements, and calculated operating limits. Graphs show how factors like excentricity, attitude angle, friction, power lost, temperature, and cooling water requirements vary with revolutions per minute.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    138 views4 pages

    DTHC.121413.ISB.00H (Working Conditions)

    Uploaded by

    tmtt44
    This document provides specifications for an intermediate shaft bearing model CEDN 235. It details the bearing's geometrical data, operating conditions, tolerances, recommended lubricant, surface quality requirements, and calculated operating limits. Graphs show how factors like excentricity, attitude angle, friction, power lost, temperature, and cooling water requirements vary with revolutions per minute.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    ISO 9.001: Certificate Ner DCA-0106-AQ-2000 ISO 14.

    001: Certificate Ner DCA-0937-AE-2001 Manufacture of bearings, stern tube seals and liners, tail shafts and rudders. Manufacture and repair of white metal bearings.

    Intermediate Shaft Bearing

    Steady state operation Working parameters

    Document Standard Reference Ship Name / Project: Shipyard / Owner: Page:

    DTCS.ISB.00H CEDN 235 ----WP 01

    Product identification: Intermediate shaft bearing model CEDN 235 Drawing number --Bearing geometrical data: Diameter [D] Effective length [B] Working conditions: Rpm max [Nmax] Load in operation [F] Environment temperature [Tenv] Cooling water [TW] Manufacture tolerances: [y] Relative bearing clearance Bearing hole [DB] Shaft diameter Oil identification: [DS]

    239,00 mm. 125,00 mm. 240,00 23,90 45,00 38,00 1,24 239,30 239,25 239,00 238,95 Rpm kN C C /oo mm. mm. mm. mm. 3,00 m/s 2436,29 kgf

    max. min. max. min.

    H7 h7

    Oil quality proposed CASTROL Alpha SP100 Oil standard ISO VG100 Viscosity at 40C 100 cSt Proposed White metal quality: White metal quality PbSb10Sn6 Surface quality: Shaft roughness, better than [Rash] Bearing roughness, better than [Rabr] Working limits: Maximum projected pressure [pmax1] Bearing maximum working temperature [tmax1] Minimum Oil film thickness necessary [Th1] Rpm min recommended for continuous work [Nmin] Required cooling water flow [Qw] Observations: Bearing calculation was perform with cooling coil consideration. 0,80 65,00 0,017 29,56 230,00 MPa C mm Rpm L/h 0,80 mm 0,80 mm

    Acc. To DIN 51519

    Acc. To ISO 4381:2000 N6 N6 Acc. To Manufacturer Acc. To Manufacturer Acc. To Manufacturer Calculated Acc. To Manufacturer

    The indicated minimum Rpm are for worst continuous working condition with warm oil (low viscosity) in order to avoid excessive wear down. Bearing must be located preferrably in areas where the air circulation improve the natural convection cooling, closed areas are to be avoided. Bearings located near of hot points as motor, gearboxes... where can receive radiant heat are to be used preferrably with help of external cooling system (cooling coil or external cooler).

    Intermediate Shaft Bearing

    Steady state operation Graphics Excentricity 0,9000 0,8800 0,8600 Excentricity(e) 0,8400 0,8200 0,8000 0,7800 0,7600

    Document Standard Reference Ship Name / Project: Shipyard / Owner: Page:

    DTCS.ISB.00H CEDN 235 ----Graphics 01

    Rpm

    Attitude Angle 30,00 25,00 AttitudeAngle(b) 20,00 15,00 10,00 5,00 0,00

    Rpm

    Intermediate Shaft Bearing

    Steady state operation Graphics Friction factor 0,0045 0,0040 0,0035 Frictionfactor(m) 0,0030 0,0025 0,0020 0,0015 0,0010 0,0005 0,0000

    Document Standard Reference Ship Name / Project: Shipyard / Owner: Page:

    DTCS.ISB.00H CEDN 235 ----Graphics 02

    Rpm

    Power lost 350,00 300,00 250,00 Powerlost(W) 200,00 150,00 100,00 50,00 0,00

    Rpm

    Intermediate Shaft Bearing

    Steady state operation Graphics Temperature 70,00 60,00 50,00 Temperature(C) 40,00 30,00 20,00 10,00 0,00

    Document Standard Reference Ship Name / Project: Shipyard / Owner: Page:

    DTCS.ISB.00H CEDN 235 ----Graphics 03

    Rpm

    Cooling water 250,00

    200,00 Coolingwater(Qw)

    150,00

    100,00

    50,00

    0,00

    Rpm

    You might also like