Original Weco Wing Unions

Simple identication New, factory-shipped Weco wing unions are color coded for quick identication. Choice of end connections Weco wing unions are available with line pipe or tubing threads, butt weld, or nonpressure seal end connections. Positive identication For positive identication in the eld, all Weco wing union nuts and subs include the Weco name union gure number, size, and pressure rating. Additionally, Weco wing unions for sour gas service are stamped Sour Gas. Fast make-up, break-out Three lug nuts and self-locking ACME threads provide fast make-up and break-out regardless of position or space restrictions.

Interchangeable parts All Weco wing union parts of the same gure number, size, and pressure rating are interchangeable. This feature makes it easy to mate male and female subs that are frequently made-up and broken-out.

Weco wing unions are the most complete line of standard and sour-gas service pipe connectors in the world. Available in 1 to 12-inch nominal pipe sizes with cold working pressures up to 20,000 psi, Weco wing unions are manufactured using the nest raw materials, tooling procedures, and heat-treating techniques available. Materials meet ASME and AISI standards. Each union is carefully inspected to ensure long, dependable service in the most extreme conditions. Like all pressure containing products, Weco wing unions require special handling (see inside back cover for Warnings and Cautions).

FMC Technologies, Inc. 26

Proven Seal Designs

Low-Pressure Services (1,000 to 2,000 psi)
Metal-tometal seal Male sub

Female sub

Weco wing unions for low-pressure services feature a primary metal-to-metal seal. The spherical surface of the male sub and conical surface of the female sub provide a large, ball-and-cone sealing surface. This metal-to-metal seal remains leak-proof even when one surface is slightly pitted or misaligned.

Metal-tometal seal

Male sub

Medium-Pressure Services (2,000 to 4,000 psi)

Many Weco wing union designs supplement the metal-to-metal seal with a resilient O-ring in the male sub. The replaceable O-ring extends union life and protects the metal-to-metal seal against corrosion.

Seal ring

Female sub

High-Pressure Services (6,000 to 20,000 psi)

Metal-tometal seal Male sub

Seal ring

Female sub

Weco wing unions for high-pressure services feature a replaceable, lip-type seal ring in the female sub. This primary seal protects the secondary metalto-metal seal from abrasion and corrosion while minimizing ow turbulence.

Tubing or pipe Seal ring

Male sub

NPS (Non-Pressure Seal) Option Figures 602, 1002, and 1502)

The Weco non-pressure seal option is especially designed for abrasive, high-pressure wing union services where welded connections are undesirable. This design provides strong, permanent end connections without butt welding. The union ends are shop assembled to pipe or tubing. An epoxy thread compound is used to secure the connection.

Female sub

Warning

Interchangeable parts Weco wing union parts of the same gure number, size and pressure rating are interchangeable, making it easy to match male and female subs that are frequently made-up and broken-out. For positive identication in the eld, all Weco wing union nuts and subs include the Weco name, gure number, size and pressure rating. It is vital that the user positively identify union connections and components to avoid mismatch conditions and potential union failure. See inside back cover for details.

FMC Technologies, Inc. 27

Wing Unions
Assembly Pressure Rating, psi, bar Figure Color Key Standard Sour Gas (see note 8) Number Standard Cold Cold Test Test Service Working Working 1,000 1,500 100 NA NA 69 103 2,000 3,000 200 NA NA 138 207 2,000 3,000 206 NA NA 238 207 2,000 3,000 207 NA NA 138 207 2,000 3,000 211 NA NA 138 207 2,500 3,750 2,500 3,750 400 172 259 172 259 4,000 6,000 4,000 6,000 400 276 414 276 414 6,000 9,000 6,000 9,000 602 414 621 414 621 10,000 15,000 7,500 11,250 1002 690 1034 517 776 10,000 15,000 7,500 11,250 1003 690 1034 517 776 15,000 22,500 10,000 15,000 1502 1034 1551 690 1034 20,000 30,000 2002 NA NA 1379 2068 15,000 22,500 2202 NA NA 1034 1551
Notes NA - Not Available 1. 2. 3. 4. 5. 6. 7. All end connections with line pipe threads unless otherwise noted. Butt-weld available. Consult factory for wall thickness. Non pressure seal congurations available. Power make-up must be used for line pipe threaded connections to achieve rated cold working pressure. Line pipe threads are not offered for sour gas service in this gure number. Line pipe threads are not recommended for sour gas service above 4-inch nominal pipe size. Figure 400 available in 5 12 - and 7-inch OD with casing threads. Available in butt-weld ends only.

1 25

1 14 32

1 12 40

FMC Technologies, Inc. 28

Nominal Pipe Sizes, inches 2 50 2 12 65 3 80

8. 9. 10.

4 100

5 125

6 150

8 200

10 250

12 300

Notes

1 1 1

1,5,6 1,4 1,2

1,2,3,9 1,3,10 1,2,3 7 7

All unions for sour gas service are painted olive green, stamped SOUR GAS or NACE MR-01-75 and have specially modied material properties. 5 and 6-inch sizes rated at 7,500 psi CWP and 11,250 test; 5 and 6-inch unions for sour gas service rated at 5,000 psi CWP and 7,500 psi test. 4 and 5-inch sizes rated at 7,500 psi CWP and 11,250 test; 4 and 5-inch unions for sour gas service rated at 5,000 psi CWP and 7,500 psi test.

Sour gas service FMC manufactures Weco sour gas unions in accordance with the National Association of Corrosion Engineers (NACE) Standard MR-01-75 and American Petroleum Institutes (API) Standard RP-I4-E.

FMC Technologies, Inc. 29

Figure 100

1,000 psi cold working pressure

Figure 200

2,000 psi cold working pressure

Figure 206

2,000 psi cold working pressure

Recommended service
Features

Manifold and line connections Pressure-tight make-up with hammer Economical low-pressure union

Recommended service
Features

General service manifolds and lines Economical, general-purpose union 1 to 4-inch sizes

Recommended service

Manifold line connections, suction service, and corrosion service

Features

O-ring in male sub improves sealing and protects metal-to-metal seal against corrosion Replaceable O-ring extends union service life 1 to 10-inch sizes

Figure 207

2,000 psi cold working pressure

Figure 211

2,000 psi cold working pressure

Figure 400

Recommended service

Recommended service

Seals manifold connections and protects union threads

Features

Production systems with electrolytic corrosion problems

Features

4,000 psi cold working pressure through 4-inch sizes; 2,500 psi cold working pressure, 5 through 12-inch sizes

Recommended service

Parts interchangeable with Figures 200 and 206 O-ring on blanking cap ensures a leak-free seal Cap can be tapped for pressure gauge Available in butt-weld

Laminated insulating rings provide 35 million ohms resistance across the union O-ring in male sub provides a positive primary seal Seal ring in female sub delvers a positive secondary seal

Manifold line connections, pump suction, and mud services

Features

2-1/2 through 12-inch sizes have O-rings for primary seal Butt-weld available Available for sour gas service

See specications tables (pg. 67 - 71) for sizes, dimensions, weights, materials, and part numbers.

Note
Note: To enhance safety, 2 Figure 602 and 1002 female subs have been modied so they cannot engage the 2 Figure 1502 nut. Also, a Go NoGo identication ring is available to determine whether the female sub is a 2 Figure 602/1002 or a 2 Figure 1502.

Figure 602

6,000 psi cold working pressure

Figure 1002

Recommended service

Manifold line connections and mud service

Features

10,000 psi cold working pressure through 4-inch sizes; 7,500 psi cold working pressure, 5 and 6-inch sizes

Recommended service

Replaceable, lip-type seal provides primary seal, protects secondary metal-to-metal seal, and minimizes ow turbulence Butt-weld available Available for sour gas service at 6,000 psi cold working pressure

Cementing, fracturing, acidizing, testing, and choke-and-kill lines

Features

O-ring in male sub improves sealing and protects metal-to-metal seal against corrosion Replaceable O-ring extends union service life 1 to 10-inch sizes

Figure 1003 Misaligning union

10,000 psi cold working pressure, 2 and 3-inch sizes; 7,500 psi cold working pressure, 4 and 5-inch sizes

Figure 1502

15,000 psi cold working pressure

Recommended service

For high-pressure connections where lines cannot be aligned

Features

Recommended service

Cementing, fracturing, acidizing, testing, and choke-and-kill lines

Features

Figure 2002

20,000 psi cold working pressure

Recommended service

Ball seat provides positive seal with up to 7-1/2 misalignment; 2-inch model up to 4 Replaceable O-ring on male sub provides primary seal Available with threaded or buttweld ends

Replaceable, lip-type seal Available for sour gas service: 10,000 psi cold working pressure; butt-weld or non-pressure seal congurations only Butt-weld available

Cementing, fracturing, acidizing, testing, and choke-and-kill lines

Features

Replaceable, lip-type seal 2 and 3-inch line sizes Butt-weld congurations only

See specications tables (pg. 67 - 71) for sizes, dimensions, weights, materials, and part numbers.

FMC Technologies, Inc. 31

Quick, positive identication Weco unions for sour gas service are stamped Sour Gas and painted with an olive green zinc-chromate primer to ensure quick, positive identication.

Meets industry standards All Weco wing unions for sour gas service meet both the National Association of Corrosion Engineers Standard MR-01-75 and API Standard RP-14-E.

Controlled hardness Weco union subs and nuts are specially heat-treated and 100% tested for controlled hardness.

Positive sealing Primary uoroelastomer seal and metal-to-metal seal combine to deliver positive sealing throughout the stated pressure range.

Sour Gas Service

FMC Technologies manufactures Weco sour gas wing unions in accordance with the National Association of Corrosion Engineers (NACE) Standard MR-01-75 and American Petroleum Institute (API) Standard RP-14-E. These outstanding, eld-proven unions are specially heat treated for controlled hardness. For fast, sure identication, each Weco sour gas union is stamped Sour Gas or NACE MR-01-75 using low stress dot stamping and painted with an olive green zinc-chromate primer that is unique to sour gas equipment. FMC Fluid Control uses uoroelastomer seals or O-rings in all sour gas unions, but does not warrant the performance of any elastomer for sour gas service.

Weco Wing Unions for Sour Gas Service

Figure 400
4,000 psi cold working pressure, 1 through 4-inch sizes; 2,500 psi cold working pressure, 5 through 12-inch; buttweld only above 4-inch sizes

Figure 602

6,000 psi cold working pressure, 1 through 4-inch sizes

Figure 1002 Figure 1003 Figure 1502 Figure 2202

7,500 psi cold working pressure, 1 through 4-inch sizes; 5,000 psi cold working pressure, 5 and 6-inch sizes 7,500 psi cold working pressure, 2 and 3-inch sizes; 5,000 psi cold working pressure, 4 and 5-inch sizes 10,000 psi cold working pressure, 1 through 4-inch sizes; butt-weld or non-pressure seal congurations only 15,000 psi cold working pressure, 2, and 3-inch sizes; butt-weld only

Caution:
It is possible to interchange sour gas parts with standard service products. Users must adopt safe practices for identication, installation, use, maintenance, and storage of sour gas equipment. (See inside back cover for additional Warnings and Cautions.)

See specications tables (pg. 67 - 71) for sizes, dimensions, weights, materials, and part numbers.

Other Weco Unions

Tank Unions

500 psi maximum line pressure, 6, 8, 10 and 12-inch sizes

Air-O-Unions

150 psi maximum line pressure, 4, 6, 8, 10, 13-3/8, and 16-inch sizes

Recommended service

Mud tanks, mud tank connecting lines, and pump suction anges
Features

Recommended service
Features

Mud suction and return lines and low-pressure uid lines Shot of rig air inates tube to seal around pipe Fast, easy make-up without close alignment Allows pipe expansion or misalignment without breaking the seal No nuts, bolts, or wrenches required

Molded nitrile seal provides a compression seal Makes up with hammer Elongated cross-section of seal ring ensures greater sealing surface when in contact with the pipe Accepts up to 7 pipe misalignment 6, 8 and 10-inch sizes may be socket welded to pipe or butt welded to tubing; 12-inch sizes require butt-weld

Suction-Hose Unions
Recommended service
Mud system suction lines
Features

500 psi maximum line pressure, 4, 5, and 6-inch sizes

Replaceable O-ring seal Choice of end ttings Secondary metal-to-metal seal Socket welded, threaded, or hose nipple

See specications tables (pg. 67 - 71) for sizes, dimensions, weights, materials, and part numbers.

FMC Technologies, Inc. 33

Hammerless Union (HL)

Recommended service
Hammerless union connection has the same industry thread as Hammer Union but provides a safer and stronger connection. Hammerless union has the same inner prole of the traditional hammer union It is stronger with a minimum weight gain Hammerless union converts a standard wing union connection into a safe hammerless connection Forged eyebrow relief aligns HL Tool to lug Raised rib discourages use of sledge hammer and improves structural integrity while distributing impact load Male sub end of conventional iron is unchanged

Lug hole has lead-in chamfer on both sides. HL union has no external impact, surface eliminating grinding of ears Large radius edge indicates open side of threaded HL union

Female sub end of conventional iron is unchanged

The Hammerless union is the next generation of union products targeted at eliminating the use of sledge hammer in making up high pressure temporary owline connections in the eld. This product was inspired by the desire for improved safety through the elimination of hammer related injuries. Anticipated applications for the Hammerless union is well service temporary ow lines, with particular attention toward applications in fracturing, stimulation, cementing, and pipelines operations. However, any area in which space is constrained or swinging a hammer is dangerous, this product is a probable t.
FMC Technologies, Inc. 34

Hammerless Union Tools

Hammerless Long Tool The Two-Person HL Long Tool is connected to HL union lug to safely impact tighten threads after making up with HL Spanner wrench First person holds tapered Non-Pinch Handle at preferred angle and direction of impact Second person uses spring-loaded swing handle to deliver controlled impact to HL Union Hammerless Spanner Wrench This tool has leverage to align iron while making up the threads of HL Union

One Tool ts all HL sizes.

Hammerless Short Tool The *One-Person HL Short Tool is connected to HL union lug to safely impact tighten threads after making up with HL Spanner Wrench. Operator uses this tool at elevated wellhead connections to tighten HL Union using one hand while tool remains safely attached

Round Wire Brush Use to clean Iron threads and HL union threads Use to clean HL union lug hole before attaching HL Tools

FMC Technologies, Inc. 35

FMC Technologies, Inc.

Flowline Products & Services

Weco Wing Union Specications

Figure 100 - 1,000 psi (69 bar) cold working pressure
Nominal Pipe Size Union Part No. Qty/Carton A Clearance Radius Outside B Diameter C End-to-end Threaded D Inside Diameter Weight Material, Sub Material, Nut in. in. mm in. mm in. mm in. mm lb kg 2 3200609 16 3 316 2 34 3 58 2 532 6 2.7 DI DI 2 12 3200610 10 3 1516 100 3 14 83 4 932 109 2 916 65 10 4.5 DI DI 3 3200611 6 4 12 114 4 102 4 78 124 3 316 81 14 6.4 DI DI 4 3200612 4 5 516 135 5 316 132 5 34 146 4 316 106 22 10 DI DI 6 3200795 1 6 1516 176 7 516 186 6 2332 171 6 932 160 45 20.4 DI DI 8 3200796 1 8 732 209 9 1532 241 7 316 183 8 14 209 66 30 DI DI

D B

Figure 200 - 2,000 psi (138 bar) cold working pressure

Nominal Pipe Size Union Part No. Qty/Carton A Clearance Radius Outside B Diameter C End-to-end Threaded Inside D Diameter Weight Material, Sub Material, Nut in. in. mm in. mm in. mm in. mm lb kg 1 3200829 40 1 3132 50 1 1932 40 2 1932 66 1 18 28 2 0.9 CS DI 1 14 3200960 28 2 14 57 2 51 2 2532 71 1 1532 37 2 0.9 CS DI 1 12 3200773 28 2 12 64 2 14 57 2 2532 71 1 2232 43 3 1.4 CS DI 2 3200778 16 3 76 2 2932 74 3 916 90 2 532 55 5 2.3 DI DI 2 12 3200899 10 3 916 90 3 1332 84 4 18 105 2 916 65 9 4.1 CS DI 3 3200782 6 4 102 4 332 104 4 1732 115 3 316 81 13 5.9 SF SF 4 3200912 4 4 1116 119 5 18 130 4 1516 125 4 316 106 18 8.2 SF SF

Figure 206 - 2,000 psi (138 bar) cold working pressure

Weco Wing Union Specications

Nominal Pipe Size Union Part No. Qty/Carton A Clearance Radius B Outside Diameter End-to-end C Threaded D Inside Diameter Weight Material, Sub Material, Nut

in. in. mm in. mm in. mm in. mm lb kg

1 3207627 40 2 51 1 1932 40 2 2132 67 1 18 28 2 0.9 CS DI

1 14 3207633 28 2 14 57 1 3132 50 2 2532 71 1 1532 37 2 0.9 CS DI

1 12 3207636 28 2 12 64 2 14 57 2 2532 71 1 2232 43 3 1.4 CS DI

2 3207281 16 3 76 2 1316 71 3 14 83 2 532 55 5 2.3 SF DI

2 12 3207278 10 3 916 90 3 1132 85 4 18 105 2 916 65 8 3.6 CS DI

3 3203048 6 4 102 4 332 104 4 1732 115 3 316 81 13 5.9 SF SF

4 3205449 4 4 1116 119 5 18 130 5 127 4 316 106 18 8.2 SF SF

6 3202521 1 6 14 159 7 12 191 6 2132 169 6 932 160 42 19.1 SF SF

8 3202552 1 7 716 189 9 916 243 7 316 183 8 14 209 65 29.5 SF SC

10 3202566 1 9 229 11 12 292 9 332 231 10 516 262 90 40.8 SF SC

Materials: AS - Alloy Steel, CS - Carbon Steel, DI - Ductile Iron Casting, SC - Steel Casing, SF - Steel Forging

67

FMC Technologies, Inc.

Flowline Products & Services

Weco Wing Union Specications

Figure 207 - 2,000 psi (138 bar) cold working pressure
Nominal Pipe Size Union Part No. Qty/Carton A Clearance Radius B Outside Diameter C End-toend Threaded D Inside Diameter Weight Material, Sub Material, Nut in. 3 4 6 8 10 3207906 3207907 3207908 3207981 3207982 8 4 1 1 1 5 34 7 316 9 1516 12 38 14 12 146 135 252 314 368 4 332 104 3 34 95 3 316 81 10 4.5 SF SC 5 18 130 4 516 109 4 316 106 16 7.3 SF SF 7 12 191 5 1316 148 6 932 160 37 16.8 SF SC 9 916 243 8 58 219 8 14 209 70 31.9 SF SC 11 12 292 9 1116 246 10 516 262 96 43.5 SF SC

Figure 211 - 2,000 psi (138 bar) cold working pressure

Nominal Pipe Size Union Part No. Qty/Carton A Clearance Radius B Outside Diameter C End-to-end Threaded D Inside Diameter Weight Material, Sub Material, Nut in. 1 3205369 40 2 18 54 1 916 40 2 34 70 1 18 28 2 0.9 CS DI 2 3205343 16 3 18 79 2 78 73 3 1532 88 2 532 55 6 2.7 SF DI

in. mm in. mm in. mm in. mm lb kg

in. mm in. mm in. mm in. mm lb kg

D B

Weco Wing Union Specications

Figure 400 - 4,000 psi (276 bar) to 4; 2,500 psi (172 bar) cold working pressure, 5 to 12
Nominal Pipe Size Union Part No. Qty/Carton A Clearance Radius B Outside Diameter End-to-end C Threaded D Inside Diameter Weight Material, Sub Material, Nut in. in. mm in. mm in. mm in. mm lb kg 2 3200291 6 3 12 89 3 116 78 5 14 133 2 532 55 11 5 SF SF 2 12 3200290 5 4 132 103 3 12 89 6 116 154 2 916 65 16 7.3 CS SF 3 3200292 4 4 38 111 4 532 106 6 732 158 3 316 81 19 8.6 SF SF 4 3200337 3 5 127 5 732 133 8 732 209 4 316 106 28 12.7 SF SF 5 12 OD* 3206347 1 5 1616 148 6 14 159 10 1532 266 5 18 130 47 21.3 SF SC 6 3202179 1 6 34 171 7 34 197 11 116 281 6 932 160 64 29 CS SC 7 OD* 3204333 1 6 34 171 7 34 171 11 116 281 6 2132 169 61 27.7 CS SC 8 3202060 1 7 1316 198 9 1932 244 11 716 291 8 14 209 95 43.1 SF SC 12 3201578 1 10 2332 272 14 356 10 1516 278 12 1132 313 163 73.9 SC SC

* Casing thread standard Note: 2 inch does have O-ring Materials: AS - Alloy Steel, CS - Carbon Steel, DI - Ductile Iron Casting, SC - Steel Casing, SF - Steel Forging

68

FMC Technologies, Inc.

Flowline Products & Services

Weco Wing Union Specications

Figure 602 - 6,000 psi (414 bar) cold working pressure
Nominal Pipe Size Union Part No. Qty/Carton A Clearance Radius B Outside Diameter End-to-end C Threaded D Inside Diameter Weight Material, Sub Material, Nut in. in. mm in. mm in. mm in. mm lb kg 1 3202377 32 2 38 60 1 34 44 3 1732 90 1 18 28 3 1.4 CS SF 1 14 3202434 9 3 14 83 2 916 65 4 78 124 1 1332 36 10 4.5 CS SF 1 12 3202428 9 3 14 83 2 916 65 4 78 124 1 1116 43 9 4.1 CS SF 2 P533564 6 3 58 92 3 3 32 78 5 3 4 146 2 116 52 15 6.8 SF SF 3 3202416 4 4 12 114 4 532 106 6 14 159 3 316 81 21 9.5 SF SF 4 3202399 2 5 316 132 5 732 133 8 14 210 4 316 106 31 14 SF SF

NOTES: AS - Alloy Steel, CS - Carbon Steel, DI - Ductile Iron Casting, CS - Steel Casting, SF - Steel Forging

Figure 1002 - 10,000 psi (690 bar) to 4; 7,500 psi (517 bar) cold working pressure, 5-6 *
Nominal Pipe Size Union Part No. Qty/Carton A Clearance Radius B Outside Diameter End-to-end C Threaded D Inside Diameter Weight Material, Sub Material, Nut in. in. mm in. mm in. mm in. mm lb kg 1 3205681 32 2 732 56 1 34 44 3 1732 90 1 18 28 4 1.8 AS SF 1 14 3205675 10 3 132 77 2 916 65 4 78 124 1 1332 36 10 4.5 AS SF 1 12 3205665 10 3 132 77 2 916 65 4 78 124 1 1116 43 9 4.1 AS SF 2 P535063 6 3 1316 97 3 3 32 78 5 3 4 146 2 116 52 16 7.3 SF SF 2 12 3205626 5 3 78 99 3 12 89 6 18 156 2 916 65 18 8.2 AS SC 2 12 (EUE) 3206927 5 4 102 3 1116 94 5 1516 151 2 1316 71 16 7.3 AS SF 3 3205565 4 4 1732 115 4 14 108 6 732 158 3 316 81 22 10 AS SF 4 3205533 2 4 3132 126 5 516 135 8 732 209 4 316 106 32 14.5 AS SF

* 5 - 6 available with butt weld ends; consult factory for other congurations.

Figure 1003 - 10,000 psi (690 bar) 2-3; 7,500 psi (517 bar) cold working pressure 4-5 *
A
Nominal Pipe Size Union Part No. Qty/Carton A Clearance Radius Outside B Diameter C End-to-end Threaded D Inside Diameter Weight Material, Sub Material, Nut in. in. mm in. mm in. mm in. mm lb kg 2 3208519 6 3 34 95 3 76 4 2132 118 2 532 55 12 5.4 AS SF 3 3219928 2 4 78 124 4 38 111 9 18 232 3 316 81 45 20.4 AS SC 4 3219932 1 5 34 146 5 12 140 10 1516 278 4 102 74 33.6 AS SF

Weco Wing Union Specications

D B

* 5 available with butt weld ends; consult factory for other congurations.

69

FMC Technologies, Inc.

Flowline Products & Services

Weco Wing Union Specications Figure 1502 - 15,000 psi (1034 bar) cold working pressure
Nominal Pipe Size Union Part No. Qty/Carton A Clearance Radius Outside B Diameter C End-to-end Threaded Inside D Diameter Weight Material, Sub Material, Nut
* Non-Pressure Seal

in. in. mm in. mm in. mm in. mm lb kg

1 3254059 19 2 78 73 2 316 55 4 1132 110 1 18 28 9 4.1 AS SF

1 12 3254057 10 3 2132 93 2 3132 75 5 1332 137 1 1116 43 17 7.7 AS SF

2 3201570 5 3 2932 99 3 316 81 7 178 2 116 52 19 8.6 SF SF

2 12 3203088 4 4 532 106 3 34 95 7 14 184 2 916 65 22 10 AS SC

3 3207510 3 4 12 114 4 1332 112 7 58 194 3 316 81 30 13.6 AS SF

4* 3252926 1 6 300 5 34 146 8 12* 216 64 29 AS SF

D B

Figure 2002 - 20,000 psi (1380 bar) cold working pressure

Nominal Pipe Size Union Part No. Qty/Carton A Clearance Radius B Outside Diameter C End-to-end Threaded Inside D Diameter Weight Material in. in. mm in. mm in. mm in. mm lb kg 2 3222761 5 3 34 95 2 1932 66 7 1332 188 1 516 33 21 9.5 AS 3 3245911 1 6 332 155 5 12 140 10 12 267 3 76 87 39.5 AS

Figure 2202 - 15,000 psi (1034 bar) cold working pressure

Nominal Pipe Size Union Part No. Qty/Carton A Clearance Radius Outside B Diameter C End-to-end Threaded D Inside Diameter Weight Material in. in. mm in. mm in. mm in. mm lb kg 2 3235746 5 3 34 95 2 78 73 8 1316 224 1 516 33 22 10 AS 3 3257994 1 6 332 155 5 12 140 10 12 267 3 76 53 24 AS

Tank unions - 500 psi (34 bar) maximum line pressure

Nominal Pipe Size Union Part No. Qty/Carton A Clearance Radius B Outside Diameter C End-to-face D Inside Diameter inside E Seal diameter inside F BW diameter Weight Material
Weco Wing Union Specications

in. in. mm in. mm in. mm in. mm in. mm in mm lb kg

10

12

3255061 3254864 3255064 3255067 2 1 1 1 6 14 7 12 8 12 9 34 159 191 213 244 7 78 9 78 11 78 14 199 247 297 356 4 38 4 38 4 12 4 12 111 111 114 114 3 3 3 3 8 8 8 8 19 19 19 19 6 58 8 58 10 34 12 34 168 219 273 324 7 38 9 516 11 38 13 12 187 237 289 343 22 31 37 58 10 14.1 16.8 21.8 SC SC SC SC

C D F B

NOTES: AS - Alloy Steel, CS - Carbon Steel, DI - Ductile Iron Casting, CS - Steel Casting, SF - Steel Forging

70

FMC Technologies, Inc.

Flowline Products & Services

Weco Wing Union Specications Air-o-unions - 150 psi (10 bar) maximum line pressure
Nominal Pipe Size Union Part No. Qty/Carton inside A Tube diameter inside B Body diameter C Butt-weld inside dia. Butt-weld D outside dia. E F End-to-face G Misalignment, degrees Weight in. in. mm in. mm in. mm in. mm in. mm in. mm in. mm lb kg 4 3207504 8 4 1932 117 4 1932 117 5 116 129 5 916 141 6 58 168 3 18 79 1 12 38 6 7 3.2 6 3207130 2 6 34 171 6 1516 176 8 203 8 58 219 10 14 260 4 102 2 51 14 18 8.2 8 3207894 2 8 34 222 8 1516 227 10 18 257 10 34 273 12 14 311 4 102 2 51 14 22 10 10 3207149 2 10 1516 278 11 18 283 12 18 308 12 34 324 14 12 368 4 14 108 2 51 14 26 11.8 12 3207897 1 12 1516 329 13 18 333 13 38 340 14 356 16 12 419 4 14 108 2 51 14 30 13.6 13 3207900 1 13 58 346 13 34 349 15 38 391 16 406 17 316 437 4 38 111 2 51 14 42 19.1 16 3207903 1 16 14 413 16 38 416 17 38 441 18 457 19 1316 503 4 14 108 2 51 14 45 20.4

G A B C D
Weco Wing Union Specications

Suction-hose unions - 500 psi (34 bar) maximum line pressure

Size/Type 6-inch hose 5-inch hose 5-inch socket weld 5-inch line pipe thread 4-inch line pipe thread 4-inch hose Blanking cap assy. Part No. P512200 3251341 3202072 3248972 3215198 3207912 3220990 Qty./ Carton 1 1 4 2 2 2 2 Length in. 14 14 14 14 4 432 7 34 5 1516 14 1532 3 1116 mm 356 356 104 194 161 368 92 in. 5 5 5 5 5 5 5 Nut radius mm 127 127 127 127 127 127 127 Nut SF SF SF SF SF SF SF Materials Sub CS CS SF DI DI DI CS lb 40 22 18 25 23 22 22 Weight kg 18.1 10 8.2 11.3 10.4 10 10

NOTES: AS - Alloy Steel, CS - Carbon Steel, DI - Ductile Iron Casting, CS - Steel Casting, SF - Steel Forging

71