Erosion & Sediment Control Field Guide For Builders Print

Catchments & Creeks Pty Ltd V2, April 2012 Page 1
Version 2, 2012
Erosion and Sediment Control Field Guide for Builders
Version 2, April 2012
Prepared by: Grant Witheridge, Catchments & Creeks Pty Ltd
Published by: Catchments & Creeks Pty Ltd
Diagrams by: Grant Witheridge, Thomas (J esse) Baber and Bryde Cameron of Catchments &
Creeks Pty Ltd
Photos by: Catchments & Creeks Pty Ltd and Geofabrics Australia
Except as permitted under copyright laws, no part of this publication maybe reproduced within
another publication without the prior written permission of the publisher.
Permission, however, is granted for users to:
store the complete document on a database, but not isolated parts of the document;
print all or part of the document, and distribute such printed material to a third party;
distribute the complete document in electronic form to a third party, but not isolated parts of
the document.
All diagrams are supplied courtesy of Catchments & Creeks Pty Ltd and remain the ownership
of Catchments & Creeks Pty Ltd. No diagram or photograph maybe reproduced within another
publication without the prior written permission of the Director of Catchments & Creeks Pty Ltd.
This document should be referenced as:
Witheridge 2012, Erosion and Sediment Control Field Guide for Builders. Catchments & Creeks
Pty Ltd., Brisbane, Queensland
Key-words: ESC, erosion and sediment control, soil erosion, erosion control, sediment control,
soil management, building site management.
Catchments & Creeks Pty Ltd, 2012
Disclaimer
Significant effort has been taken to ensure that this document is representative of current (2012)
best practice erosion and sediment control; however, the author cannot and does not claim that
the document is without error, or that the recommendations presented within this document will
not be subject to future amendment.
To be effective, erosion and sediment control measures must be investigated, planned, and
designed in a manner appropriate for the given work activity and site conditions.
No warranty or guarantee, express, implied, or statutory is made as to the accuracy, reliability,
suitability, or results of the methods or recommendations.
The author shall have no liability or responsibility to the user or any other person or entity with
respect to any liability, loss, or damage caused, or alleged to be caused, directly or indirectly, by
the adoption and use of any part of the document, including, but not limited to, any interruption
of service, loss of business or anticipatory profits, or consequential damages resulting from the
use of the document.
Specifically, adoption of the recommendations and procedures presented within this field guide
will not guarantee:
(i) compliance with any statutory obligations;
(ii) compliance with specific water quality objectives; or
(iii) avoidance of environmental harm or nuisance.
Principal reference documents:
IECA (2008) Book 1
Best Practice Erosion & Sediment Control.
International Erosion Control Association,
(IECA) Australasia Chapter, 2008
Contents (key chapters identified in red text):
1. Introduction
2. Principles of erosion and sediment control
3. Site planning
4. Design standards and technique selection
5. Preparation of plans
6. Site management
7. Site inspection
8. Bibliography
IECA (2008) Book 3
Book 3: Appendices
Contents:
H. Building sites
I. Instream works
J . Road and rail construction
K. Access tracks and trails
L. Installation of services
M. Erosion processes
N. Glossary of terms
X. Index (Books 1 to 3)
The full set of books may be purchased
through: www.austieca.com.au
IECA (2008) Book 4 Fact Sheet
Best Practice Erosion & Sediment Control.
International Erosion Control Association,
(IECA) Australasia Chapter, 2008
Book 4 Design Fact Sheets, specifically the
Miscellaneous Fact Sheets:
Building Sites Part-1 (General)
Building Sites Part-2 (Hazard Assessment)
Building Sites Part-3 (Site Inspection)
Building Sites Part-4 (Standard Drawings)
These fact sheets may be down-loaded from:
www.austieca.com.au
www.catchmentsandcreeks.com.au
Healthy Waterways (2009)
Controlling Stormwater Pollution on your
Building Sites, 2009
Healthy Waterways, Brisbane, Queensland
Contents Page
Purpose of field guide 5
About the author 5
Introduction 5
Impacts of soil erosion and sediment run-off 6
Benefits of effective erosion and sediment 7
Types of soil erosion 8
Key management practices 9
Site Assessment
Site assessment and planning 11
The provision of expert advice 12
Assessment of soil conditions 13
Testing for dispersive and slaking soils 14
Problems caused by dispersive and slaking soils 15
Management of dispersive soils on building sites 16
Assessment of drainage requirements during the building phase 17
Assessment of permanent stormwater requirements 18
Preparation of Erosion & Sediment Control Plans 19
Example Erosion & Sediment Control Plans 20
Example technical notes 21
Erosion & Sediment Control during the Building Phase
Critical components of building site erosion and sediment control 23
Work site practices 24
Material stockpiles 26
Drainage control measures 27
Stabilisation of high-velocity drains 28
Control of roof water 29
Stabilised site entry/exit points 30
Sediment control measures 31
Sediment fence 32
Kerb inlet sediment traps 34
Grated inlet sediment traps 36
Service trenches 38
Erosion control measures 39
Maintenance of Control Measures
Site Maintenance 41
Site check list 43
Glossary of terms 44
Purpose of field guide
This field guide has been prepared specifically to:
provide builders with general guidelines on the management of building sites with respect to
soil erosion and sediment run-off;
provide building contractors with general guidelines on the selection of appropriate
drainage, erosion, and sediment control measures for small, single-dwelling, building sites.
The field guide has not been prepared for the purpose of being a sites primary guide to erosion
and sediment control. As such, the recommendations provided within this field guide should not
be used to overrule advice obtained from suitably trained experts, or the recommendations
and/or requirements of locally adopted ESC guidelines/manuals.
The field guide has been prepared primarily for small, single-dwelling building sites. As such, it
is not necessarily applicable to multiple-dwelling building sites or civil construction sites, but all
building and construction sites do share many common principles of stormwater management,
and erosion and sediment control.
About the author
Grant Witheridge is a civil engineer with both Bachelor and Masters degrees from the University
of NSW (UNSW). He has some 30 years experience in the fields of hydraulics, creek
engineering and erosion & sediment control, during which time he has worked for a variety of
Federal, state, local government and private organisations.
Grant is the principal author of the IECA (2008) Best Practice Erosion & Sediment Control
documents, and in 2010 was the recipient of IECA (International) Sustained Contributor Award
for services to the erosion and sediment control industry.
Introduction
The three cornerstones of the erosion and sediment control industry are drainage control,
erosion control, and sediment control. The functions of building site drainage, erosion, and
sediment controls are presented below.
Drainage control measures aim to prevent or reduce soil erosion caused by concentrated
flows (including the management of rill and gully erosion), and to appropriately manage the
movement of clean and dirty water through the work site. Drainage control measures are
often temporary measures that are operational only during the building phase. These
measures should not be confused with the permanent stormwater management
requirements of residential properties.
Erosion control measures aim to prevent or reduce soil erosion caused by raindrop impact
and sheet flow (i.e. the control of splash and sheet erosion). These measures can be either
temporary or permanent.
Sediment control measures aim to trap and retain sediment displaced by up-slope erosion
processes. These are mostly temporary measures that are operational only during the
building phase.
It is noted that on most work sites, best practice sediment control measures cannot, on their
own, provide adequate protection of downstream environments. Therefore, appropriate
drainage and erosion control measures must also be applied, wherever practical, especially
when working within clayey soils.
One of the most notable features of the erosion and sediment control industry is that there is
almost always an exception to every rule and guideline. The fact that a control measure is
observed to work well on one site or region does not mean that it will work well on all sites.
Small building sites represent a unique set of site conditions within the erosion and sediment
control industry. These sites are usually too small to incorporate high standard sediment control
measures such as Sediment Basins, and it is often impractical to incorporate effective erosion
control measures until the building activities are near completion.
What is considered reasonable and practicable on a construction site may not be considered
reasonable and practicable on a typical building site. Common sense is often a good test, and
this should never be lost amongst the numerous rules and regulations.
Impacts of soil erosion and sediment run-off
Dust generated on a construction site
Dust problems
It is important to remember that soil
erosion can be generated by wind, rain
and flowing water.
Dust generation is more commonly
associated with civil construction sites
than building sites.
Dust generated from building sites;
however, can become a nuisance to
neighbouring properties, including damage
to recently washed cloths and fabrics.
Sedimentation of drainage pipes
Sedimentation within stormwater drains
Sediment washed from building sites can
settle within stormwater drains causing:
increased property flooding
increased flooding on roadways
increased council maintenance costs
increased risk of mosquito problems
Sediment can also settle on roadways
causing road safety issues.
Deposition of sand within a waterway
Deposition of coarse sediments
The deposition of coarse sediment in
minor waterways, such as creeks, can:
increase the risk of property flooding;
cause bank erosion and channel
instabilities
cause the loss of essential aquatic
habitats
increase the weed infestation of creeks
increase maintenance costs for
stormwater asset owners such as local
councils
Turbid water within an urban waterway
Release of fine sediments and turbidity
The release of fine sediments and turbid
water into waterways can:
adversely affect the health and bio-
diversity of aquatic life
adversely affect recreational and
commercial fishing
increase the concentration of nutrients
and metals within these waters
increase the risk of algal blooms
increase the risk and cost of water
treatment works associated with both
farm dam and town water supplies
Benefits of effective erosion and sediment
Muddy site access track
Improved wet weather site conditions
Having effective site drainage during the
building phase can significantly reduce
site wetness during periods of wet
weather.
Diverting clean water around soil
disturbances can also reduce the
generation of muddy ground.
Experience has shown that overall
building times are reduced when roof
water is directed to a stormwater system
rather than just discharging onto ground.
Landscaping of finished works
Improved landscaping
Walking or driving (e.g. bobcats) over
saturated ground not only generates
muddy conditions (above photo), but can
also cause long-term soil drainage
problems.
If not corrected, such soil problems can
lead to long-term health and growth
problems for future plants.
Damaged soil conditions often also means
these areas will become boggy even after
only just small amounts of rainfall.
Sediment deposition on roadway
Reduced clean-up costs
Well managed building sites can become
fully operational much faster after wet
weather compared to poorly managed
sites.
Effective sediment control measures can
reduce the need to clean mud and sand
from roadways.
Public information sign
A better public image
Clean well-managed building sites present
a better public image for the building
industry.
Remember; neighbourhood disputes that
commence during the building phase can
result in long-term problems for the home-
owners that inherit the site once you have
left.
Types of soil erosion
Raindrop impact erosion
Raindrop impact erosion
Raindrops can exert significant force upon
impact with the ground.
The resulting soil erosion is often difficult
to detect and consequently is often
ignored.
Raindrop impact erosion is a major cause
of the release of fine, clay-sized particles
from building sites.
Raindrop impact onto clayey soils is one
of the main reasons why stormwater run-
off develops a deep brown colour.
Land subject to sheet erosion
Sheet erosion
Sheet erosion is the removal of an even
layer of surface soil through the actions of
raindrop impact and stormwater runoff.
Sheet erosion is likely to occur if
stormwater run-off flows over open soil at
a speed greater than walking pace.
After a distance of around 10 m, sheet
erosion is likely to change into rill erosion.
It is noted that the loss of just 1 cm of soil
from a 500 m
2
allotment represents the
displacement of 5 m
3
of soil.
Rill erosion adjacent a building pad
Rill erosion
A rill is an individual eroded channel in
the soil that is less than 300 mm deep.
Rill erosion is typically caused by high
velocity concentrated flows (i.e. water
flowing at a brisk walking pace or faster).
Rilling can also result from soil dispersion
(see below).
Along with flow velocity, soil compaction
and soil chemistry can also influence the
degree of rilling.
Erosion of a dispersive soil
Chemical erosion
Soil chemistry can have a significant
influence over the severity and extent of
soil erosion.
If a soil is dispersive then it is likely to be
highly unstable when wet, resulting in
severe, deep rilling (or fluting shown left),
tunnel erosion and/or gully erosion.
As a general guide, if the soil erosion is
significantly deeper than its width, then
soil chemistry is likely to be a contributing
factor to the soil erosion.
Key management practices
Building site
Sediment fence
Mulching of disturbed site access pathway
Fully turfed and stabilised backyard
Key ESC management practices
Small building sites present a unique set of
site conditions for the erosion and sediment
control (ESC) industry.
However, the key principles of erosion and
sediment control do not vary from small
building site to large civil construction sites.
The differences mainly appear in the priorities
given to each of the key principles in respect
to on-site drainage, erosion and sediment
control.
When applied to small building sites, the key
management practices can be summarised
as:
1. Apply sensible site planning that respects
the local topography.
2. Develop formal Erosion and Sediment
Control Plans for high-risk sites.
3. Obtain all required approvals before soil
disturbances or building works commence.
4. Divert up-slope stormwater run-off around
soil disturbances.
5. Stabilise site entry/exit points.
6. Ensure that the smallest area of land is
disturbed for the shortest period of time.
7. Save and promptly replace the topsoil.
8. Install appropriate sediment controls along
the lower edge of the soil disturbance or
work site.
9. Place all long-term stockpiles of erodible
material within the sediment control zone.
10. Connect roof water downpipes to the
permanent stormwater drainage system
immediately the roof and guttering are
installed.
11. Actively control wind- and rain-induced soil
erosion.
12. Fully contain all wash-water from
concreting, ceramic cutting, and
equipment cleaning activities within an
on-site area of grass or porous soil.
13. Continually monitor and maintain all
control measures.
14. Firmly compact and stabilise all backfilled
service trenches.
15. Promptly revegetate or otherwise stabilise
disturbed areas once works are finished
within each work area.
Site Assessment
Site assessment and planning
Site meeting
Appropriate building practices
The builderclient relationship can exist in
many different forms.
Some clients are open to advice; some
clients have fixed ideas that are unlikely to
change.
Wherever practical, builders should assist
home-owners in choosing building layouts
and building practices that are appropriate
for the site conditions.
Building site subject to severe wet weather
Extent and timing of soil disturbances
Soil disturbing activities on steep sites
should be scheduled for the drier periods
of the year, especially in tropical regions.
During the wet season, concentrate on
those work activities that do not require
any soil disturbances.
Major earthworks should be delayed until
just prior to the commencement of building
activities.
Disturbances to the road verge should be
kept to a minimum.
Pole home being built on a steep site
Building on steep slopes
It is better to modify the building to suit the
land, than to modify the land to suit the
building.
On steep sites, avoid the use of slab-on-
ground construction techniques as this
can greatly increase the erosion hazard,
and potentially result in ongoing erosion
problems.
Slab-on-ground construction should
ideally be limited to land slopes less than
10%, and certainly not on slopes
exceeding 20%.
Poor activities occurring on the footpath
Work space limitations
It is important to ensure that there is
sufficient space to locate all building
materials and stockpiles on the property.
Building the biggest home on the smallest
allotment may be all the rage, but it should
not come at the cost of long-term
environmental harm.
Space-limited building sites may require
site-specific sediment control measures
and/or the extensive use of mini-skips for
material storage and waste removal.
The provision of expert advice
Erosion & Sediment Control Plan
Erosion & sediment control specialists
Erosion & sediment control plans often
need to be prepared as part of the building
application.
On complex or high-risk building sites it
may be advisable to seek the advice of a
specialist erosion control consultant with
CPESC qualifications.
A Certified Professional in Erosion and
Sediment Control (CPESC) is a consultant
specifically trained in the practices of
erosion and sediment control.
Drainage problems on a building site
Property drainage
Investigations into potential overland flow
problems, including the management of
significant quantities of stormwater run-off
passing through a property, normally
requires input from an engineer who
specialises in stormwater management.
If drainage problems are not major, then
your plumber may be able to advise you
on a suitable drainage plan.
Failed rock retaining wall
Retaining walls
Retaining walls can present many
problems to builders and home-owners.
Most of these problems relate to either
drainage or land stability issues.
Drainage issues should be investigated by
a stormwater engineer or geotechnical
consultant.
Land stability issues should be
investigated by a geotechnical consultant
and/or structural engineer.
Gully erosion up-slope of a new home
Soil investigations
If the soils are chemically unstable, then
minor earthworks on a steep site can
initiate major gully erosion problems.
If your building proposal involves cutting
into the side of a steep slope to form the
building foundations, then a geotechnical
investigation is recommended.
If soil tests identify dispersive, sodic or
slaking soils, then advice from a soil
scientist may be required (see over page).
Assessment of soil conditions
Severe rill erosion
Soil condition
Structurally unstable soils can experience
severe erosion problems once vegetation
is removed.
If soils are imported onto the site, then
efforts should be taken to ensure the soils
provide the required stability and erosion
resistance when wet.
Dispersive, sodic or slaking soils
(discussed below) can be very unstable
when wet.
Sandy soils can be unstable when wet or
dry.
Sandy soil region
Sandy soils
Sandy soils, such as those that commonly
occur along coastal regions, can be highly
erodible once vegetation is removed.
Heavy storms during the building phase
can cause significant quantities of
sediment (sand) to be washed from the
site if appropriate measures are not taken.
These sites are best managed with the
use of a properly installed sediment
fence.
Steep, sandy sites require expert advice.
Clayey soil building pad
Clayey soils
Clayey soils can be either highly erosion
resistant or highly erodible.
As a general guide, the lower the sodium
content and the higher the organic content
of the soil, the greater the erosion
resistance.
When working in clayey soils, priority
should be given to minimising soil erosion
wherever practical dont just rely on
sediment control measures.
Dispersive soil
Dispersive soils
Soil chemistry typically affects soil erosion
through a process called dispersion,
which most commonly results from high
levels of sodium within the soil.
Dispersive soils are often recognised by
the occurrence of deep, narrow rilling.
Often the rills are spaced only a few
centimetres apart.
Alternatively, if the surface of soil looks
like the surface of a white ant nest, then it
is again possible that the soil is dispersive.
Testing for dispersive and slaking soils
Soil analysis
Exchangeable sodium percentage
In high-risk areas, the soils should be
scientifically tested prior to designing
foundations or retaining walls.
Concerns should be raised if the soil test
indicate either:
Exchangeable sodium percent >6%
Emerson aggregate classes 1 to 5.
Note; classes 3(2), 3(1) and 5 have a
slight risk of dispersive problems.
Dispersive soil
Aggregate immersion test
The Aggregate Immersion Test can be
used as an indicator of dispersive soils.
The test involves filling a dish with distilled
water to a depth sufficient to cover the soil
samples. Several dry, hard clumps of soil
are then gently placed in the water. The
water is then observed for colour changes
(after all the air has escaped).
If the water discolours both horizontally &
vertically around the samples, then the soil
may be dispersive. Highly dispersive soils
will collapse in less than 10 minutes.
Non dispersive, non slaking soil
Non-dispersive soil
If the water remains clear and the
boundary of the soil clumps remains
clearly defined, then the soil is likely to be
non-dispersive.
If the soil clumps are loose or otherwise
heavily disturbed, then the soil clumps will
likely separate into smaller pieces when
first placed into the water. This does not
indicate that the soil is dispersive.
Air escaping from the soil can also cause
the clumps to fall apart. This does not
indicate that the soil is dispersive.
Slaking soil
Slaking soils
Slaking soils are soils that readily collapse
in water, but do not necessarily cloud the
water.
If the water remains clear, and the clumps
completely collapse and spread
horizontally, then the soil could be a
slaking soil.
Slaking soils commonly occur within
regions containing granite rock. These
soils can also be highly erodible.
Problems caused by dispersive and slaking soils
Deep rill erosion
Deep rilling
If drainage channels are cut into
dispersive soils, then these drains can
quickly erode.
The erosion usually takes the form of a
deep rill with near-vertical sides.
If an open drain must be cut into such
soils, first strip and save the existing
topsoil (if any), cut the drain, then use the
topsoil, or any other non-dispersive soil, to
place a minimum 200 mm (min) thick
cover over the dispersive soil, before
revegetating the drain.
Tunnel erosion under concrete drain
Tunnel erosion
Dispersive soils are highly susceptible to
tunnel erosion.
Such tunnel erosion can appear in earth
embankments and farm dams.
Sealing dispersive soils with concrete can
result in tunnel erosion forming under the
concrete (left).
Similar tunnel erosion can also form under
loose rock and rock mattress linings.
Failed gabion overflow spillway
Failure of retaining walls
Many types of retaining walls and overflow
spillways rely on the stability of the
underlying soil for their overall structural
stability.
If these structures are constructed on a
dispersive soil, the risk of structural failure
can be increased significantly.
The failure of a retaining wall within a
small residential allotment can result in
significant financial repair costs due to the
space limitations often associated with
such properties.
Gully erosion in a slaking soil
Land slips and gully erosion
Dispersive and slaking soils are highly
susceptible to gully erosion and land slips.
Cut-and-fill earthworks should be
avoided, or at least heavily supervised, if
the property contains dispersive soils.
This means slab-on-ground construction
processes may not be suitable on land
with a gradient steeper than 5%.
Management of dispersive soils on building sites
Cut-and-fill construction
Avoid cutting into a dispersive soil
The extent and severity of earthworks
should be minimised when working on
dispersive soils.
If it is necessary to cut into a dispersive
soil, then seek expert advice from a soil
scientist or geotechnical engineer on how
to seal and protect the dispersive soils.
Slab-on-ground construction processes
should be avoided on land with a gradient
steeper than 5% unless appropriate expert
advice has been obtained.
Erosion of an open soil drain
Seal and stabilise all drainage channels
Do not form open soil drains within a
dispersive soil.
In dispersive soil areas, all excavated
drains should be sealed with a minimum
200 mm layer of non-dispersive soil and
then stabilised.
Do not placed filter cloth, concrete, rock,
gabions, or rock mattresses directly on a
dispersive soil without first covering the
soil with a suitable layer of non-dispersive
soil.
Retaining wall adjacent a dispersive soil
Retaining walls
In most circumstances, the best treatment
for dispersive soils is to ensure the soil is
buried under a layer of non-dispersive soil
before the final surface treatment.
When a retaining wall is constructed
adjacent a dispersive soil, then prior to
placement of filter cloth or a drainage
layer, the exposed soil must first be
covered with a layer of non-dispersive soil,
typically minimum 200 mm thickness, but
preferably 300 mm.
Do not placed filter cloth, concrete, rock,
gabions, or rock mattresses directly on a
dispersive soil without first covering the
soil with a suitable layer of non-dispersive
soil.
A dispersive soil should not be directly
seeded or covered with erosion control
fabric without first sealing the soil with a
layer of non-dispersive soil.
Assessment of drainage requirements during the building phase
Some building sites may require temporary drainage control measures to divert stormwater
run-off around soil disturbances and active work areas.
As a guide, if the up-slope drainage area exceeds 1500 m
2
, and the monthly rainfall is
expected to exceed 45 mm, then all reasonable and practicable measures should be taken
to divert stormwater run-off around any soil disturbances.
Each work site and climatic region is different and thus the need for temporary drainage
control measures must be assessed on a site-by-site basis (ask your local council).
In all cases, it is important to ensure that stormwater is not unlawfully diverted or released
into neighbouring properties, or allowed to cause erosion at points of discharge.
Diversion of flows across the slope
Tasks:
Firstly, assess the benefits and
practicality of diverting up-slope run-off
around any given soil disturbance.
Temporary drainage options include Flow
Diversion Banks (possibly formed from
the stripped topsoil), and excavated Catch
Drains.
If the subsoils are known to be dispersive
or highly erodible, then avoid cutting
drains into the soil. Instead, use Flow
Diversion Banks to redirect water across
the slope.
Flow diversion down the slope
Secondly, choose an appropriate gradient
and channel lining for each drain. Low
gradient drains may be left with an open
soil surface.
If flow velocities are expected to be high,
then either control the water velocity with
the use of Check Dams, or select an
appropriate channel lining.
Thirdly, consider how best to move
stormwater down any steep slopes.
Drainage options include Slope Drains for
minor flows, or suitably lined drainage
Chutes. Alternatively, a Level Spreader
can be used on large allotments to release
the water as sheet flow down a well-
grassed slope.
Diversion of driveway run-off
Fourthly, ensure that any stormwater run-
off flowing towards the street or driveway
is diverted towards an adjacent Sediment
Fence.
If the property has a long, unsealed
driveway, then stormwater run-off may
need to be diverted off the driveway at
regular intervals with the use of raised
earth cross-drains (speed bumps).
Finally, ensure that stormwater is not
unlawfully diverted or released into
neighbouring properties, or allowed to
cause erosion at points of discharge.
Assessment of permanent stormwater requirements
Roof water drainage during a major storm
Roof water drainage
The typical stormwater drainage layout for
a residential property consists of four main
components:
Roof water drainage
Subsoil drainage system
Minor storm drainage system
Major storm drainage system
Roof water drainage systems normally
convey only the minor storms.
Roof water drainage systems will
generally overtop during major storms.
Subsoil drainage
Subsoil drainage system
A subsoil drainage system is generally
required if:
the property contains a retaining wall
a building is recessed into the earth, or
earth is placed up against a building
Special care must be taken when
designing subsoil drainage systems if the
soils are dispersive.
Grated stormwater inlet
Minor storm drainage system
Stormwater run-off from minor storms is
normally conveyed through urban
properties within sub-surface pipes.
Grated stormwater inlets can be used to
collect minor flows and feed the run-off
into a piped drainage system.
These grated inlets can be subject to
significant debris blockage during major
storms.
Overland flow during a major storm
Major storm drainage system
The run-off from major storms usually
needs to be conveyed through properties
as overland flow.
Rarely can an underground drainage
system carry the full run-off expected from
a major storm.
The design of the major storm drainage
system usually requires experience and a
good eye for detail. On complex sites,
seek advice from a stormwater engineer.
Preparation of Erosion & Sediment Control Plans
Erosion & Sediment Control Plans (ESCP)
For high-risk sites, an Erosion and
Sediment Control Plan (ESCP) should be
prepared prior to any site disturbance.
The plan must be appropriate for the site
topography and climatic conditions.
These plans should detail the proposed
means of controlling stormwater drainage,
soil erosion, and sediment run-off during
the building phase.
The level of detail supplied in the ESCP
must be commensurate with the
complexity of the building works.
Technical notes can be included on the
plan to identify critical actions and control
measures required on the site.
Example plans
The following diagrams show examples of the
general layout of temporary drainage and
sediment control measures on various building
sites.
Property that falls diagonally towards the
road
The sediment fence may require
occasional returns (zigzags) in order to
prevent stormwater simply flowing down
the fence to the lowest corner of the
property.
Fence returns are normally installed at a
maximum spacing of 10 m.
These returns should extend at least 1m
up the slope.
Property that falls away from the road
The entry/exit pad does not require a
raised flow diversion bund because
sediment-laden run-off from the entry/exit
pad will not flow towards the road.
Placement of a sediment fence or safety
fence along the front of the property can
help to restrict traffic movement to the
entry/exit pad.
The sediment fence may be fixed to the
back fence (if available), but must still be
suitably buried (anchored).
Stormwater run-off from stockpiles must
drain to the sediment fence or other
suitable sediment trap.
Example Erosion & Sediment Control Plans
Property that falls parallel to the road
If property fencing already exists, then a
sediment fence (suitably anchored) may
be fixed to the fence for support.
Extending the sediment fence along the
front of the property can help to control
vehicular movements onto the site.
The entry/exit pad may or may not require
a raised flow diversion bund to prevent
sediment-laden water flowing off the rock
pad onto the road.
Property with a building face along one
boundary line (zero lot alignment)
Initially a sediment fence should be
located along the full length of the lower
property boundary.
Sections of this sediment fence may need
to be removed to allow foundations and
building works to be completed, but it must
remain in place and in proper working
order for as long a practical.
Property that falls towards the road
Catch drains located along the side of the
property are only required if it is necessary
to either, permanently direct stormwater
away from adjacent properties, or to
temporarily divert sediment-laden water to
a sediment fence.
If the catch drain carries only clean
stormwater run-off, then the run-off should
be directed around the sediment fence as
shown on the right-hand-side of the
diagram.
Narrow lots
In most cases drainage and sediment
controls on narrow lots should be as per
larger building sites.
The sediment fence may need to be
located across the full width of the lower
property boundary.
In such cases, the fence may be lowered
during working works to allow site access,
but must be raised at the end of each
working day and while rain is occurring.
Example technical notes
The use of technical notes on an Erosion & Sediment Control Plan is a convenient way to
identify and highlight critical issues or actions the builder must consider when working the
building site. Erosion control measures are often best identified through the use of technical
notes.
The following is a list of example technical notes.
All sediment fences are to be installed prior to commencement of earthworks if rain is
possible while earthworks are occurring.
Prior to commencing excavations, topsoil must be stripped from the designated area and
stockpiled on site for later use.
Immediately following the completion of bulk earthworks, all disturbed areas outside the
footprint of the base slab (if a base slab is used, otherwise all disturbed areas) to be
mulched (minimum 50 mm) or otherwise stabilised against soil erosion.
Designated earth batters are to be stabilised, as directed on the plans, immediately after
bulk earthworks have been completed on the site.
Appropriate building waste receptors must be located on the site and suitably maintained
during the building phase.
All ground-cover vegetation outside the immediate building area shall be preserved during
the building phase.
Damage to the road reserve (i.e. footpath) vegetation is to be minimised and repaired as
soon as practicable at the builder's expense.
No materials are to be stockpiled outside the property boundaries beyond the end of a
working day.
Soil and sand stockpiles are to be covered if strong winds are forecast that could displace
the material from the site.
Stockpiles of earth are to be covered with an impervious cover if rain is forecast.
The sites underground stormwater drainage system is to be installed and operational prior
to the roof being laid.
Roof water downpipes (temporary or permanent) are to be connected to the stormwater
drainage system immediately after the roof and guttering are laid.
All temporary drainage and sediment control measures are to remain functional during the
building phase.
All erosion and sediment control structures are to be inspected each working day and
maintained in proper working order at all times.
Sediment is to be removed from up-slope of each sediment trap (e.g. sediment fence)
immediately after rainfall if the depth of sediment exceeds 200 mm.
Excessive sediment deposition on the rock entry/exit pad is to be removed.
Additional rock shall be applied to the rock entry/exit pad as necessary to maintain its
functionality.
All sediment deposited off the site as a result of work-related activities is to be collected and
disposed of in a manner that will prevent any safety or erosion hazard.
Brick, tile and masonry cutting must be carried out on a pervious surface, such as grass, or
open soil, or in such a manner that all sediment-laden run-off is prevented from discharging
into a gutter, drain, or water body.
Washing/flushing of sealed roadways must only occur where sweeping has failed to remove
sufficient sediment and there is a compelling need to remove the remaining sediment (e.g.
for safety reasons). In such circumstances, all reasonable and practicable sediment control
measures must be used to prevent, or at least minimise, the release of sediment into
receiving waters. Only those measures that will not cause safety and property flooding
issues shall be employed. Sediment removed from roadways must be disposed of in a
lawful manner that does not cause ongoing soil erosion or environmental harm.
Erosion & Sediment Control
during the Building Phase
Critical components of building site erosion and sediment control
Erosion & Sediment Control Plan
Site assessment
An effective Erosion & Sediment Control
Plan (ESCP) can only be developed if the
site conditions have been properly
assessed (refer to pages 11 to 21).
The primary objective of the on-site
erosion and sediment control practices is
to ensure all reasonable and practicable
measures are taken to minimise short and
long-term soil erosion and the adverse
effects of sediment run-off.
What is considered reasonable and
practicable will vary from region to region.
Catch drain formed up-slope of work site
Drainage control (pages 27 to 29)
Drainage control focuses on those
temporary drainage measures required on
a work site prior to installation of the
permanent drainage system.
The primary objectives of drainage control
are to:
minimise soil erosion caused by
concentrated flows; and
minimise the generation of mud during
periods of wet weather.
Sediment control measures
Sediment control (pages 30 to 38)
Sediment control measures focus on
minimising sediment run-off from a work
site.
Most sediment control measures are only
effective at trapping coarse sediment
particles such as coarse silts and sands.
The soil particles that cause water to turn
brown (turbid water) are generally the
finer-grained particles such as fine silts
and clays. These particles are best
managed through effective erosion control
practices.
Turfing finished soil profile
Erosion control (page 39)
Erosion control measures focus on
minimising soil erosion caused by raindrop
impact and sheet flow (i.e. the control of
splash and sheet erosion).
The primary objectives here are to:
minimise the duration disturbed soils
are exposed to strong winds and
rainfall; and
stabilise disturbed soils with temporary
or permanent erosion control measures
as soon as practical after earthworks
are finished in any given area.
Work site practices
Mini skip
Waste management
Adequate waste collection bins must be
provided on-site and maintained such that
potential and actual environmental harm
resulting from such material waste are
minimised.
Many waste products, such as earth and
cement, can become part of the sediment
run-off if not appropriately stored in waste
receptors.
Secured storage containers
Equipment storage
It is uncommon for shipping containers to
be used on residential building sites to
secure building materials; however the
practice is common on larger commercial
building sites.
The use of storage containers can help to
reduce site litter and the risk of chemical
spills, both of which can add to the overall
pollution hazard.
Topsoil stockpiled on roadway
Delivery of building materials
In most instances it is unacceptable for
deliveries of sand and soil to be
stockpiled, even temporarily, on roadways.
If such practices are totally unavoidable,
then a heavy-duty tarpaulin should first be
placed over the road surface to help
minimise the quantity of material left on
the roadway after the materials are moved
on-site.
Material stockpiles must not remain within
the road reserve beyond the end of the
working day.
Soil swept from roadway
Cleaning materials from roadways
Any pollutants, including clay, silt, sand,
gravel, soil, mud, cement and ceramic
waste, deposited on a roadway either as a
result of soil erosion, building activities or
material deliveries, must first be collected
and removed by sweeping.
The washing of sealed roadways should
only occur in circumstances where
sweeping has failed to remove sufficient
deposited material and the remaining
material represents a safety risk.
Work site practices
Building activities occurring on footpath
Use of the road verge
Building activities, including material
storage, should not occur on the footpath
or road verge if an alternative on-site
location is available.
All works within road reserves can only
occur at the discretion of the road owner
(usually the council).
Cement wash-off from concreting works
Controlling cement wash-off
Brick, tile and masonry cutting must not
occur outside the property.
Cement wash-off is highly alkaline and, if
allowed to wash down stormwater drains,
can kill aquatic life within receiving waters.
Cleaning equipment over grass area
Cleaning of equipment
The washing of tools and painting
equipment should be carried out within the
property and over a porous grassed
surface or open soil.
Paint brushes should never be washed
within a household basin (connected to
the sewer) or over a stormwater grate.
Cleaning of concrete truck
Disposal of concrete waste
The solid or liquid waste from concrete
trucks and concreting equipment should
be fully contained within the work site.
If large volumes of concrete waste are
expected, then a bunded earth disposal
area should be formed on the site.
Concrete spilt onto roadways must not be
washed into a stormwater drain. Instead,
scrap or sweep the bulk of the material
from the road surface. Where necessary,
the remaining material may be washed
onto a grassed verge (if possible).
Work site practices
Cutting materials over grass surface
Control of ceramic & concrete waste
Brick, tile and masonry cutting should be
carried out on a permeable surface, such
as grass or open soil, or in such a manner
that all sediment-laden run-off is
prevented from discharging into a gutter,
drain, or water body.
A sand berm (brickies sand) can be
formed down-slope of masonry activities
to filter sediment-laden wash water before
it is allowed to discharge from the
property.
Silt socks placed in kerb
Placement of down-slope sediment traps
A series of sediment filter socks should be
placed within the drain or road kerb down-
slope of the work activities.
Unfortunately, these sediment traps
cannot treat the primary pollution hazard
generated by cement wash-offthat being
the alkalinity (high pH) of the water.
Any sediment traps placed within the road
reserve must not represent a safety
hazard to road users.
Cement washed onto porous soil
Concrete and cement have a greater
potential to cause harm than sediment as
a result of their effects of water pH.
Wherever practical, cement wash-off
should be directed to porous ground
and/or an open trench excavated along
the side of the treated surface.
Wherever possible, avoid the use of
exposed aggregate surfaces (e.g.
driveways) unless the cement wash-off
can be fully contained.
Cement wash flowing to kerb
Cement wash-off must not be allowed to
flow freely into gutters, drains or receiving
waters unless all reasonable and
practicable measures are taken to direct
this wash-off towards an excavated trench
or earth filter.
A flow control berm (e.g. sandbags, or
brickies sand berm) can be formed down-
slope of such building works (shown by
arrows in photo) to direct sediment-laden
water to open soil or infiltration trench.
Material stockpiles
Stockpile up-slope of sediment fence
Material stockpiles
Suitable material storage areas need to be
located up-slope of the main sediment
barrier (e.g. sediment fence).
The building layout should allow sufficient
room on the site for the storage of all
building materials.
No materials should be stored outside the
property boundaries. Where unavoidable,
council permission must be obtained
before stockpiling materials within the road
reserve.
Stockpile covered during wet weather
Use of tarpaulins
In addition to a down-slope sediment
fence, stockpiles of clayey soil may
require an impervious cover during
periods of wet weather.
On the other hand, stockpiles of clean
sand that are located behind a sediment
fence, will only need a protective cover if
the sand stockpiles are likely to be
exposed to strong winds.
Sand delivered in bags
Steep and confined sites
In some regions, materials such as sand,
can be delivered within large bags.
On steep sites and sites with limited
available space, erodible materials may
need to be stored in commercial-sized
bins or mini-skips.
The use of mini-skips can be beneficial
within the older commercial and residential
areas of cities where space limitations are
usually critical and the space between the
building and property frontage is limited.
Stockpile located away from overland flow
Drainage control
Stockpiles of erodible material should be
located away from overland flow paths.
If this is not practical, then a flow diversion
berm should be placed up-slope of the
stockpile to divert overland flows around
the stockpile.
Drainage control measures
Catch drain
Diversion of up-slope stormwater
Wherever practical, stormwater run-off
from up-slope areas should be diverted
around soil disturbances.
If the area of land up-slope of the soil
disturbance exceeds 1500 m
2
, then it is
usually essential to divert stormwater run-
off from such areas.
In regions with well-defined wet and dry
seasons, flow diversion is only like to be
warranted during those months when the
rainfall is expected to exceed 45 mm.
Flow diversion bank
Drainage control techniques
Up-slope stormwater may be collected
and moved across the site by constructing
either Catch Drains (top) or Flow Diversion
Banks (left).
If the soils are known to be dispersive,
then it is usually unadvisable to cut open
drains into the soil, instead preference
should be given to the use of flow
diversion banks or piped drainage
systems.
Geotextile-lined drainage chute
Temporary drainage chutes
Filter cloth is commonly used to line short-
term (<3 months) drainage chutes. Do
not use filter cloth on dispersive soils.
ALL drainage Chutes require:
flow diversion banks, or similar, to
direct flow into the chute
a well-defined inlet profile
a well-defined cross-sectional profile
that can fully contain the flow (including
splash) down the slope
a stable outlet and energy dissipation
system at the base of the chute
Slope drain
Slope drains
Slope Drains are flexible, solid-wall PVC
pipes that can be used to direct up-slope
stormwater run-off through confined
building sites or down steep embankment.
Level spreaders
Level Spreaders consist of either a turfed
weir or recessed log weir placed at the
end of a flow diversion bank or catch drain
to discharge minor flows down a stable,
grassed slope, or to release the run-off
evenly into bushland.
Stabilisation of high-velocity drains
Temporary, filter cloth-lined drain
Control of soil erosion
If flow velocities within a constructed drain
are expected to cause erosion, then the
options are to either line the drain or
control the flow velocity with Check Dams.
Channel lining may consist of turf, filter
cloth (left) or commercial erosion control
mats.
Check dams are normally formed from
sandbags (see below).
Turfed drainage channel
Permanent drainage channels
The site's permanent drainage system
should be installed as soon as practical.
This means that the drainage system can
immediately be stabilised with the final
surface treatment, such as turfing (left),
rock lining, or concrete.
Stormwater drain lined with jute mesh
Erosion control mats
Temporary Erosion Control Mats can be
used to control soil erosion within
temporary and permanent drains.
In drainage channels, the most effective
erosion control mats are either jute (plant-
based) or coir (coconut fibre) mesh
products.
Most erosion control mats and mesh
products allow grasses to grow through
the mats.
Sandbag check dam
Temporary velocity-control check dams
The use of Check Dams on building sites
is rare.
In most cases the best solution is to
protect high velocity drains with an
appropriate channel lining.
Check dams are most effective when used
on drains with a gradient less than 10% (1
in 10).
Rock-based check dams are generally
only suitable for use in drains at least
500imm deep.
Control of roof water
Permanent sub-surface drainage installed
Installation of permanent drainage system
To reduce soil erosion and site wetness,
roof water should be discharged away
from active work areas and any disturbed
soil surface.
The permanent sub-surface drainage
system should be installed and ready to
receive roof water prior to the framing
inspection.
Flexible, solid downpipe
Temporary downpipes
During those periods when there is a
reasonable likelihood of rainfall,
permanent or temporary downpipes
should be installed as soon as the roof
and guttering are laid.
Temporary downpipes are normally used
prior to final cladding or wall construction.
The specification of roof water drainage
controls is best identified on building plans
through the use of technical notes (refer to
page 21).
Plastic downpipe
Temporary downpipes
The use of temporary plastic downpipes
has become common on building sites.
These temporary drainage control
measures can significantly reduce down-
time and clean-up costs following
extended periods of wet weather.
Extreme care must be taken to ensure
twists do not exist within these light-plastic
downpipes; otherwise, the plastic flow
tubes will likely rip from the guttering
during storms.
Sediment released from stormwater pipe
Control of inflows
During the building phase, stormwater
entry into the sub-surface drainage system
must be strictly controlled.
Sediment and sediment-laden water
should not directly enter the stormwater
system without previously passing through
an appropriate sediment trap or filter.
Stabilised site entry/exit points
Rock entry/exit pad
Entry/exit pad
Wherever reasonable and practicable, site
access should be restricted to just one
entry/exit point.
All entry/exit points need to be stabilised
to minimise:
the release of sediment-laden water
from the building site; and
the trafficking of sediment onto an
adjacent roadway.
Stabilised rock pads also provide all-
weather parking areas for work vehicles.
Rock entry/exit pad
Rock pads
Rock pads normally consist of a 150 to
200 mm thick layer of minimum 40 mm
rock.
The rock pad should be at least 2 m wide,
and where practical, should extend from
the kerb to the building slab.
In rural areas and on large lots where the
building is located well away from the
roadway, the rock pad should be placed
adjacent the sealed roadway and have a
minimum length of 10 m.
Rock pad with flow diversion berm
Drainage control
If the building site is elevated above the
road, then it is possible that stormwater
run-off from the building site could
potentially wash sediment from the
entry/exit pad onto the roadway.
To avoid this, it is usually necessary to
construct a raised flow diversion berm
across the rock pad (figures left & below)
to direct stormwater run-off into an
adjacent sediment trap such as a
sediment fence.
Standard dimensions of a rock pad for use on building sites
Retention of down-slope grass filter
Retention of existing grass
On building sites, the primary sediment
control device is normally a sediment
fence.
Unfortunately, a sediment fence on its own
is unlikely to provide the desired
entrapment of the fine-grained sediments
that cause turbid run-off.
Consequently, wherever practical the
sediment fence should be supplemented
with the retention of existing grassed
areas to help filter sediment from run-off.
Sediment fence
Use of sediment fence
A sediment fence is not a filtration system.
It is best to consider a sediment fence as
a porous dam wall.
Its primary job is to temporarily pond water
during a storm, allowing the gravitational
settlement of sediments within the ponded
water.
Therefore, a sediment fence must be
constructed in a manner that allows the
temporary ponding of water at regular
intervals along the fence.
Sediment fence placed on verge
Placement of controls outside property
Sediment controls must not be placed
outside the property boundary unless
specifically approved by the relevant road
authority (usually the local council).
Mulch berms must be used with caution
Alternatives to sediment fence
Mulch berms can be an effective
alternative to sediment fence.
However, mulch berms can be easily
damaged by vehicles driving over the
berms.
Regular (chipped) garden mulch MUST
NOT be used. Instead a fractured, fibrous
mulch is required to avoid the mulch berm
simply washing away.
Regular returns (visible in photo) must be
installed as per sediment fences.
Sediment fence
Sediment fence woven fabric
Use of woven sediment fence fabric
Woven fabrics are made by weaving
individual strips of impervious material into
a fabric that allows water to weep through
the overlaps rather than through the
actual strips of material.
They are the most commonly used fabrics
for sediment fence manufacture.
Woven sediment fence fabrics are
generally suited to most building sites, but
sediment capture is generally limited to
only the coarser-grained sediment
particles.
Sediment fence composite fabric
Use of composite sediment fence fabric
Composite fabrics consist of a woven
fabric backing (black material in photo left)
with a non-woven fabric stitched to the up-
slope face (green material in photo left).
Composite, non-woven fabrics are
generally preferred on those building sites
where a higher standard of sediment
control is required.
The non-woven (green) face must point
up-slope.
Wire mesh backing
Installation of a sediment fence
Ideally a sediment fence should be
installed along the land contour (i.e. along
a line of constant elevation).
On most building sites, however, it is not
practical to install the fence along the
contour, instead it is usually installed
along the property lower boundary.
Support post must be placed at max 2 m
spacing unless the fence has a top wire
(anchored at 1 m spacing), or a wire mesh
backing (left), in which case a 3im spacing
of support post is allowed.
Placement of regular returns
Use of sediment fence returns
Sediment fences that extend beyond 10 m
in length must incorporate returns.
Fence returns should extend at least 1 to
1.5 m up the slope.
Sediment fence
Inappropriate use of shade cloth
Inappropriate fabrics
Do not construct sediment fences from
shade cloth or open weave fabrics.
Sediment fences generally should also not
be constructed from filter cloth. The only
exception being the formation of a
sediment filter down-slope of a soil
stockpile or as part of a de-watering
operation.
Fence not returned up-slope at end
Inappropriate installation techniques
The ends of a sediment fence must be
turned up the slope (a return) to prevent
water simply passing around the ends of
the fence.
In the photo left, the final support post
should have been placed up the slope
near the retaining wall. This would have
allowed water to pond up-slope of the
sediment fence away from the grated
stormwater inlet.
Toe of fabric incorrectly anchored
Inappropriate anchorage of fabric
The bottom of the fabric must be
anchored to prevent wash-outs.
The bottom 300 mm of fabric must be
suitably anchored either in a 200 mm deep
trench, or under clean sand or aggregate
(bottom right), but not randomly spaced
rocks (left).
The support posts must be placed down-
slope of the fabric (not as shown below-
left).
Post placed on wrong side of fence Recommended installation options
Kerb inlet sediment traps
Selection criteria for the use of kerb inlet sediment traps:
1. Safety first do not use any sediment control system if that system represents a safety risk
to persons or property. On open public roadways, consider the use of commercial gully
bags to collect sediment within the gully chamber. Caution, sediment traps that extend into
the trafficable lane may also represent a hazard to passing cyclists and motor vehicles.
2. Flooding risk any adopted sediment control system must not result in flooding of
neighbouring properties.
3. Type of kerb inlet the choice of sediment control system depends on the type of kerb
inlet. Kerb inlets located on the slope of a roadway (on-grade inlets) may incorporate gully
bags or dam type sediment traps (sandbags or filter socks) placed up-slope of the inlet.
Kerb inlets located at depressions in a roadway (sag inlets) may incorporate gully bags or
barrier type sediment traps (filter socks) placed around the inlet.
4. Warning a sediment trap must not surround or block an on-grade kerb inlet.
Gully bag
Gully bags
Commercial gully bags are generally
considered to perform better than
sediment traps placed on the road
surface.
They are typically used when it is
considered unsafe to cause ponding or
sediment deposition on the roadway.
The types of gully traps include the flexible
filter bags (left) and solid filter boxes lined
with filter cloth.
Filter sock sediment trap
On-grade kerb inlet sediment traps
On-grade inlets require a different
sediment control system to sag inlets.
A series of sediment traps may be
required to achieve optimum performance.
Sandbag sediment trap
Sandbag sediment traps
The use of a spillway helps improve
sedimentation by allowing the sediment-
laden water to pass through the pond
rather than around it.
Kerb inlet sediment traps
Sag inlet sediment trap
Sag inlet sediment traps
These types of sediment traps are used at
sag inlets at road depressions.
As a general rule, the filter sock must not
be allowed to fully block the kerb inlet.
Exceptions apply only when:
there is no risk of causing flooding of
adjacent properties; and
where there is a suitable stormwater
bypass system within the adjacent
property, such as a stable overland flow
path
Sag inlet sediment trap
Alternative sag inlet sediment trap
Alternative designs include filter socks and
block and aggregate systems (below).
Inappropriate on-grade sediment trap
Inappropriate kerb inlet sediment traps
Sediment traps must not be placed across
the opening of on-grade kerb inlets. This
will cause the water to simply bypass the
inlet and continue to flow down the
roadway.
To be effective, a sediment trap must be
able to trap and retain sediment, not just
divert the stormwater and sediment down
the roadway!
Insufficient sediment control
Ineffective kerb inlet sediment traps
A single sandbag is generally insufficient
to provide adequate sediment control.
Even the best sediment trap can become
ineffective if not regularly maintained.
Grated inlet sediment traps
Selection criteria for the use of grated field inlet sediment traps:
1. Safety first do not use any sediment control system if that system represents a safety risk
to persons or property.
2. Flooding risk any adopted sediment control system must not result in flooding of
neighbouring properties. A spill-through weir, or the like, may need to be incorporated into
the sediment trap to control the depth and extent of ponding.
Table 19 Preferred sediment control technique for various catchment conditions
Soil type Small catchments Medium catchments Large catchments
Sandy soils Fabric wrap
Fabric drop inlet
Block & aggregate Rock & aggregate
Clayey
soils
Filter sock
Fabric wrap or drop
inlet using reinforced
non-woven filter cloth
Block & aggregate
incorporating filter
cloth
Block & aggregate
incorporating filter
cloth
Fabric wrap inlet protection
Fabric wrap inlet protection
Very small catchment areas.
Most commonly used on building sites.
Formation of the excavated pit is critical.
Filter sock drop inlet protection
Filter sock drop inlet protection
Filter socks (including straw or compost-
filled Fibre Rolls, and Compost Berms) are
only suitable for small drainage areas
(such as found on most building sites).
Fibre (straw) filled socks are mostly suited
to sandy soils.
Compost berms or compost-filled socks
work best in clayey soil areas.
Compost-filled socks can adsorb some
dissolved and fine particulate matter.
Excavated drop inlet protection
Excavated drop inlet protection
Excavated drop inlet protection is used in
locations where water ponding around the
stormwater inlet is not allowed to reach a
level significantly higher than the existing
ground level.
Safety issues may require the excavated
pit to be surrounded by appropriate safety
fencing.
Grated inlet sediment traps
Fabric drop inlet protection
Fabric drop inlet protection
Fabric drop inlet protection is best used in
sandy soil regions.
Suitable for relatively small catchment
areas.
Maximum spacing of support posts is 1 m
(photo left is a poor example).
A spill-through weir (below) normally
needs to be incorporated into one side of
the sediment trap to control the depth of
ponding.
Installation of support frame Placement of fabric
Block & aggregate drop inlet protection
Block & aggregate inlet protection
Block & aggregate drop inlet protection is
suitable for larger catchments.
In clayey soils, filter cloth is placed
between the aggregate and blocks to
improve the removal of fine sediments.
The depth of ponding upstream of the field
inlet is governed by the height of the
blocks.
The diagrams below show two types of
block arrangements (prior to placement of
the aggregate).
Block details for low flow rate system Block details for high flow rate system
Service trenches
Installation of services
The installation of services can cause
many problems to builders because:
the arrival of the service installers
cannot always be reliably planned
the trench often extends beyond the
main sediment fence
it can be impractical to stockpile earth
and bedding material within any
location other than the road reserve
In all cases, builders must take all
reasonable measures to minimise the
release of sediment.
Excavated service trench
Ideally, earth excavated from service
trenches should be stockpiled behind the
main sediment fence until ready for
placement back in the trench.
Wherever practical, the excavated earth
should be placed up-slope of the trench to
reduce sediment run-off during storms.
Appropriate safety measures must always
be applied.
Backfilling of a service trench
Backfilling service trenches
When backfilling service trenches, cap the
trench with topsoil and compact to a level
at least 75 to 100imm above the adjoining
ground level.
This practice allows for some subsidence
of the fill material, and ensures the fill is
sufficiently compacted to avoid ongoing
soil erosion.
Poorly backfilled service trench
Control of ongoing soil erosion
Backfilled trenches should be
appropriately stabilised, for example,
covered with turf.
If backfilled service trenches are not
adequately stabilised, then ongoing soil
erosion is likely to occur until a suitable
grass cover is achieved.
Erosion control measures
Light mulch cover
Stabilisation of finished earthworks
Finished earthworks should be stabilised
as soon as practical to minimise soil
erosion.
Erosion control measures are usually
identified on the Erosion and Sediment
Control Plan through the use of technical
notes (refer to page 21).
The extent of erosion control measures
usually depends on the likelihood and
intensity of expected rainfall.
Turf ready for laying
Stabilisation of open surfaces
Ideally, lawn areas should be turfed as
soon as building activities are completed.
Builders are encouraged to take the
opportunity to include the supply and
installation of such items within the
building contract.
Rock mulched drain through garden bed
Stabilisation of drainage paths
Areas that are likely to experience
significant overland flow should be
stabilised with rock mulching (left), erosion
control blankets or turf.
Both thick and thin erosion control
blankets are available.
The thin blankets perform a task similar to
light mulching.
The thick blankets (below-left) perform a
task similar to that of heavy mulching, thus
assisting in weed control.
Temporary (jute) erosion control blanket
Stabilisation of earth batters
Newly formed earth batters should be
covered with topsoil and stabilised as
soon as possible.
If the earth batters are to be grass seeded,
then the application of light mulch
(<50imm) cover or thin erosion control
blanket can help to stabilise the slope.
If the batter is to be vegetated with trees
or shrubs, then the slope can be stabilised
with a heavy mulch cover (50100 mm) or
a thick erosion control blanket.
Maintenance of Control Measures
Site Maintenance
Maintenance of a sediment fence
Regular site inspections
All drainage, erosion and sediment control
measures must be checked regularly and
maintained in good working order at all
times.
All control measures should be inspected
at least weekly during dry weather, and
daily during wet weather.
Damaged items need to be repaired, even
if it is not currently raining.
Trapped sediment needs to be removed
from the sediment trap.
Earth spilling over a sediment fence
Control of shifting earth
Ensure that sediment control barriers have
not been damaged by shifting earth or
poorly stacked building materials.
Sediment fences can be easily damaged
by shifting earth and stockpiles.
Stockpiled material should not lean
against the sediment fence.
Poorly located sand stockpile
Earth and sand stockpiles
Where necessary, relocate any materials
stockpiled outside the main sediment
control barrier.
Materials that have been temporarily
stockpiled on the verge should be
relocated onto the property before the end
of the working day.
Entry/exit pad in need of maintenance
Entry/exit pads
Reapply crushed rock to entry/exit pads if
excessive sediment build-up occurs.
An excessive build-up of sediment on a
rock pad is considered to exist when the
rocks are not clearly visible and sediment
is being transported onto the road.
An excessive build-up of sediment on a
roadway is considered to exist when the
quantity of sediment deposited within any
1im
2
area exceeds 500 grams (approx.
small two handfuls).
Site maintenance
Clean-up tools
Cleaning-up spills
Material spills (e.g. spilt sand, sediment
and concrete) must be promptly clean-up.
This means that suitable cleaning
equipment must be available on-site.
Sediment fence in need of maintenance
Remove sediment after storms
Following storms, excessive sediment
should be removed from sediment fences
and any other sediment traps.
Material removed from sediment control
devices must be disposed of in a manner
that does not cause ongoing soil erosion
or environmental harm.
Sediment cleared from roadway
Prompt collection of sediment from roads
Sediment and other material washed from
the work area, or transported onto roads
by work vehicles, must be removed from
gutters, drains and roads:
immediately if rain is occurring or
imminent; or
immediately if considered a safety
hazard; or
if items (i) or (ii) do not apply, before
completion of the days work.
Do NOT hose sediment down drains
Cleaning road surfaces
The hosing of road surfaces to remove
sediment must only occur in cases where
sweeping has failed to remove sufficient
deposited material and a safety risk
remains.
Appropriate sediment traps must exist
while roads are being washed down.
All reasonable and practicable measures
must be used to minimise the release of
sediment into stormwater drains.
Site check list
Location: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Date: . . . . . . . . . . .
Site-generated dust and stormwater run-off are not causing nuisance or

damage to adjoining properties.
Up-slope stormwater run-off is managed to minimise soil erosion and site

wetness.
Stormwater run-off is not causing unacceptable levels of soil erosion.
Roof water run-off is not causing unnecessarily soil wetness within active work
areas.
Site activities are being carried out in a manner that minimises the duration
that disturbed areas are exposed to the erosive forces of wind, rain and flowing
water.
Soil erosion resulting from rainfall is being minimised.
Soil erosion resulting from strong winds is being minimised.
Sediment leaching from material stockpiles is not contaminating stormwater

run-off.
Exposed soil surfaces are being rehabilitated as soon as practicable to

minimise soil erosion.
Adequate precautions are being taken to minimise sediment leaving the work
area as a result of site traffic.
Site activities are not causing unacceptable levels of sediment to leave the
work site.
Sediment control measures are located fully within the property.
Off-site material spills and sediment deposits have been cleared in a manner
that minimises environmental harm, safety issues, and damage to public and
private property.
All reasonable and practicable measures are being taken to prevent concrete
waste or wash-off entering gutters, drains and waterways.
All reasonable and practicable measures are being taken to prevent

contaminated water from cutting and cleaning activities entering gutters, drains
and waterways.
Drainage, erosion, and sediment control measures are being maintained in

proper working order at all times.
Safety risks associated with erosion and sediment control measures are being
minimised, if not totally prevented.
Glossary of terms
Aggregate immersion
test
An on-site soil test that can indicate the existence of a dispersive or
slaking soil. The testing procedure involves filling a dish or jar with
distilled water and immersing clumps of soil. The soil samples are
then observed for their reaction over the next hour.
Building site A site where the fabrication or erection of a building or structure is
the primary activity.
Catch drain A minor excavated drain, either temporary or permanent, used for
such purposes as the diversion of stormwater around a soil
disturbance.
Check dam Small, regularly spaced, flow control structures that reduce the
velocity of water in drains by damming the water to increase the
flow depth. Typically used to control soil erosion in newly formed
drains, and/or to act as minor sediment traps.
Chute A short open channel that conveys water down a steep slope.
Clayey soil A soil that contains at least 20% clay. These soils readily form a
clod when compressed in the hand, feel very smooth and sticky
when wet, and are difficult to shovel when compacted.
Clay-sized particles Sediment particles less than 0.002 mm in equivalent diameter.
Clean water Water that either
enters the property from an external source and has not been
further contaminated by sediment within the property; or
water that has originated from the site and is of such quality
that it either does not need to be treated in order to achieve the
required water quality standard, or would not be further
improved if it were to pass through a sediment trap.
Cut-and-fill earthworks A process of slope modification in which soil is excavated from one
section of a slope and used to construct an embankment below.
Dispersive soils A structurally unstable soil that readily disperses into its constituent
particles (clay, silt and sand) when placed in water. Moderately to
highly dispersible soils are normally highly erodible and are likely to
be susceptible to severe rilling and tunnel erosion.
Drainage control Any system, procedure, or material employed to:
prevent or minimise soil erosion caused by concentrated
overland flow (including the management of rill and gully
erosion); or
divert flow around or through a work site or soil disturbance; or
divert clean water away from a sediment trap; or
appropriately manage the movement of clean and dirty water
through a work site.
Drop inlet An inlet to a sub-surface drainage system located within an open
area where the water falls vertically into a collection chamber.
Environmental harm Any adverse effect, or potential adverse effect (whether temporary
or permanent) on an environmental value.
Erosion and sediment
control plan (ESCP)
A site plan, or set of plans, including diagrams and explanatory
notes, that demonstrates proposed measures to control stormwater
drainage, soil erosion, and sediment runoff on a building site.
Erosion control The protection of soil or other granular material from erosion or
measures taken to reduce potential erosion.
Erosion control blanket A blanket of synthetic and/or natural material, used to protect soil
against erosion caused by wind, rain and minor overland flows.
The term blanket generally refers to products best used in areas of
sheet flow (e.g. on earth banks) rather than in drainage channels
where erosion control mats are generally preferred.
ESC Erosion and sediment control.
ESCP Erosion and Sediment Control Plan.
Exchangable sodium
percentage
The proportion of the cation exchange capacity occupied by sodium
ions, expressed as a percentage. Sodic soils are categorised as
those with an ESP from 6 to 14%, strongly sodic soils are those
with an ESP of 15% or more.
Field inlet An inlet to a sub-surface drainage system located within an open
area where the water falls vertically into a collection chamber.
Filter cloth Industrial grade, non-woven, synthetic fabric traditionally used to
separate soils and rock of different textures or grain size, but also
used as a short-term filter for the removal of medium to coarse
sediment-particles from a liquid (usually water).
Filter fence A filter fence is a type of filter barrier consisting of non-woven
geotextile fabric staked as a vertical fence.
Flow diversion bank Flow diversion banks typically consist of a raised earth
embankment or tightly packed sandbags placed in such a manner
to re-direct the flow of water.
Gabion A basket filled with rocks, or similar material, usually rectangular in
profile, used in the construction of retaining walls and erosion-
control structures.
Heavy storm Rainfall with:
an intensity equal to, or greater than, 10 mm/hr but less than
50imm/hr; or
a total rainfall depth equal to, or greater than, the equivalent of
the 1hr duration, 1 in 2 year average recurrence interval (ARI)
design storm rainfall depth over a 24 hour period, but less than
the equivalent of the 1hr duration, 1 in 10 year ARI design
storm rainfall depth over a 24 hour period.
Jute A strong vegetable fibre used in the making of temporary erosion
control fabrics.
Level spreader Finely contoured end-of-drain profile designed to allow
concentrated flow to be released as even sheet flow over a
nominated width of stable (usually grassed) land.
On-grade kerb inlet Stormwater inlet formed into the kerb of a roadway where the
roadway has a positive longitudinal grade (i.e. water approaches
the inlet from only one direction).
Raindrop impact
erosion
The spattering of soil particles caused by the impact of raindrops
on the soil. The loosened particles may or may not be subsequently
removed by run-off.
Rill erosion The removal of soil by run-off from the land surface as sheet flow
begins to concentrate in one or more small channels, generally up
to 300 mm deep.
Road verge That portion of the road reserve not covered by the carriageway or
footpath.
Rock mattress A low profile flexible rock-filled basket with a length and width
significantly greater than its depth thus forming a mattress like
structure.
Rock pad A well-defined, rock-lined surface (pad) placed immediately
adjacent a sealed roadway over which vehicles access into or out-
of a work site. Entry/exit pads are used to extract and retain
sediment from the tyres of vehicles leaving a work site and act as
all weather parking areas.
Run-off That part of rainfall not lost to infiltration, evaporation, transpiration
or depression storage, that ultimately flows from the drainage
catchment.
Sag kerb inlet Stormwater inlet formed into the kerb of a roadway where the
roadway has a zero longitudinal grade (i.e. stormwater approaches
the inlet from both directions).
Sandy soil A soil that contains at least 50% sand. These are coarse-grained
soils that are easy to shovel and break-up when compacted. It is
very difficult to form a clod when these soils are compressed in the
hand.
Sediment Any clay, silt, sand, gravel, soil, mud, cement, fine-ceramic waste,
or combination thereof, transported from its area of origin.
Sediment basin A dam and associated basin used to capture and retain sediment-
laden runoff from a land disturbance.
Sediment control Any system, procedure or material used to filter, trap or settle
sediment from sediment-laden water.
Sediment control zone That portion of a work site that drains to a sediment control device,
excluding the entry/exit pad.
Sediment fence A purpose-made, woven or composite (non-woven with woven
backing), geotextile fabric sediment trap constructed as a vertical
fence in continuous (buried) contact with the ground and supported
by posts.
Slab-on-ground A construction process involving the fabrication of a structure on a
reinforced concrete slab that forms the foundations to the structure.
Slaking soil The partial breakdown of soil aggregates in water due to the
swelling of clay and the rapid expulsion of air from pore spaces. It
does not include the effects of soil dispersion.
Slope drain A temporary drainage conduit (pipe) extending down the face of a
newly formed or unstable slope. Typically used as a temporary
drainage system to control soil erosion while the bank is being
stabilised, or while the final drainage system is being constructed.
Sodic soil A soil containing sufficient exchangeable sodium for the clay in the
soil to readily disperse when placed in water.
Tunnel erosion An erosion process involving the removal of sub-surface soil by
water while the surface soil remains relatively intact. Water seeps
through soil causing the dispersion and/or slaking of soil particles.
The dispersed soil is then removed by seepage until the seepage
path takes the form of a tunnel.
Turbidity A measure of the clarity of water. Commonly measured in terms of
Nephelometric Turbidity Units (NTU).

Erosion & Sediment Control Field Guide For Builders Print

Uploaded by

Copyright:

Available Formats

Erosion & Sediment Control Field Guide For Builders Print

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Erosion & Sediment Control Field Guide For Builders Print

Uploaded by

Copyright:

Available Formats

Catchments & Creeks Pty Ltd V2, April 2012 Page 1

Site-generated dust and stormwater run-off are not causing nuisance or

Up-slope stormwater run-off is managed to minimise soil erosion and site

Stormwater run-off is not causing unacceptable levels of soil erosion.

Soil erosion resulting from rainfall is being minimised.

Soil erosion resulting from strong winds is being minimised.

Sediment leaching from material stockpiles is not contaminating stormwater

Exposed soil surfaces are being rehabilitated as soon as practicable to

Sediment control measures are located fully within the property.

All reasonable and practicable measures are being taken to prevent

Drainage, erosion, and sediment control measures are being maintained in

You might also like