Eaton Edx 2000h

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

E Series

E Series DX Uninterruptible Power System


Reliable Power Protection for Todays Computing Environments
Introducing the E Series DX UPS
The E Series DX UPS double-conversion online UPS from Eaton affordably protects mission-critical applications from downtime, data loss and corruption. The double-conversion architecture incorporates rectifier and inverter stages to completely isolate the output power from all input anomalies. By adapting to a wide range of input voltages, the E Series DX avoids battery usage during minor power fluctuations, saving its capacity for times when utility power is completely lost.

Features

Online double-conversion topology assures maximum reliability Wide input voltage range appropriate for the harshest electrical environments Standard models for fixed run-time performance Tested for generator compatibility Automatic bypass for fault tolerance Optional SNMP communications provide remote network-based monitoring XL models for customized, long run time applications, with fast recharging Cold start-on-battery power allows portable power WINPOWER software monitors power conditions Intuitive front-panel user interface for consistent status indication

Product snapshot
Power Rating: Voltage: Frequency: Technology: 1 kVA20 kVA 60 to 138 VAC (low voltage) 80 to 300 VAC (high voltage) 50/60 Hz (auto-sensing) High-frequency double-conversion online

Internal Automatic Bypass Utility Filtering AC to DC Rectifier DC to AC Inverter Load

Input voltage

Output voltage

Battery

Online double-conversion topology


This topology guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the AC to DC then DC to AC conversion process. The battery is used only as a backup source.

Wide input voltage range


DX UPS have a very wide input voltage range of up to 120-300V, optimized to improve compatibility with engine generator sets and reduce the numbers of transfer to battery power. The batteries are used only for the most serious incidents, maximizing available backup time and extending battery life.

High performance and reliability


DX uses High Frequency technology to bring its users a compact. UPS that delivers perfect sine wave output.

Automatic bypass
In case of overload or UPS fault, the DX UPS automatically transfers the load to utility AC power.

Advanced communications
An RS232 port is available for easy connection of the UPS to the server. It may be used for local monitoring. An optional SNMP card is also available for network administration. WINPOWER monitoring software can be used to:

Alert users of a power event or pre-specified condition Automatically shut down your servers Remotely supervise and control UPS solutions

High-performance battery charger


The DX battery charger:

Cold start-on-battery power


This function ensures trouble-free start-up of your applications even during a utility power outage.

Reduces battery recharge time Protects the battery against damage caused by deep discharge Prevents disturbances on the distribution system by correcting the power factor Avoids propagating faults on the distribution system (back-feed protection)

Backup times from five minutes to several hours


DX UPS offers a standard backup time of five to eight minutes on full load to protect the applications. XL models allow users to reach several hours of runtime using external batteries.

E Series DX Battery Runtime chart LV Model Battery Runtime 1/2 load Battery Runtime Full load HV Model Battery Runtime 1/2 load Battery Runtime Full load 1000 14min 5min 1000 14min 7min 1500 14min 5min 2000 31min 11min 3000 17.5min 5min 3000 16min >5min 6000 23min 8min 6000 20min 8min 10000 1:1 12min 5min 10000 1:1 16min >5min 10000 3:1 External bat External bat 10000 3:1 External bat External bat 15000 3:1 External bat External bat 15000 3:1 External bat External bat 20000 3:1 External bat External bat 20000 3:1 External bat External bat

EATON CORPORATION

Eaton E Series DX UPS

E Series DX rear panel

1. Output Receptacles 2. Input/Output Terminal Block 3. AC Input 4. Modem Surge Protection 5. Standard RS232 Communication Port 6. Optional SNMP Communication Port 7. Extended Battery Connector (XL models only) High Voltage 6000 VA
5 6

High Voltage 10000 VA


5 6

High Voltage 15 kVA/20 kVA

High Voltage 1000 VA


5 6

High Voltage 2000 VA


5 6 7 5

High Voltage 3000 VA


6 7 7 7 6 5

7 1 1

4 3

1 3

4 3

Low Voltage 6000 VA


5 6

Low Voltage 10000 VA


5 6

Low Voltage 1000 VA


5 6 5

Low Voltage 1500 VA


6

Low Voltage 3000 VA


5 6 7 2 2 7 7

7 1

4 3

4 1 3

1 2 4

www.eaton.com/eseries 1.800.356.5794

E Series DX UPS technical specifications - HIGH voltage models E Series DX E Series DX 1500 LV/1050 E Series DX E Series DX E Series DX E Series DX E Series DX E Series DX Model Numbers/Watts 1000/700 E Series DX 2000 HV/1400 3000/2100 6000/4200 10000 1:1/7000 10000 3:1/7000 15000 3:1/10500 20000 3:1/14000 Low Volt - Standard Version EDX1000L EDX1500L EDX3000L EDX6000L EDX10KL N/A Low Volt - XL Version N/A EDX1000LXL EDX1500L XL EDX3000L XL EDX6000LXL EDX10KLXL External Battery High Volt - Standard Version EDX1000H EDX2000H EDX3000H EDX6000H EDX10KH N/A High Volt - XL Version EDX20KHXL31 EDX1000HXL EDX2000HXL EDX3000HXL EDX6000HXL EDX10KHXL EDX10KHXL31 EDX15KHXL31 External Battery Technology Online double-conversion IGBT with micro-controller Input / Output 115V (Low-Voltage Models) Nominal Input Voltage 220V (All Models) 380 / 220 Vac three-phase 220V (High Voltage Models) 60V to 138V (Low Voltage Models) 185V +/3% to 266 +/3% (Low Volt) Input Voltage Window 20% / -25% 122V to 300V (High Volt) 122 to 300V (High Voltage Models) 115V (Low-Voltage Models) 240V / 120V (Low Voltage Models) Nominal Output Voltage 220V 220V (High Voltage Models) 220V (High Voltage Models) 115V (Low-Voltage Models) 240V / 120V (Low Voltage Models) Output Voltage on Battery 220V 220V (High Voltage Models) 220V (High Voltage Models) Frequency 50/60Hz, auto-detection Data Line Protection Input / output jacks included for telephone / modem / internet line surge protection N/A Output Receptacles (High Volt) 4 IEC style (two output cables included) Hardwired 6 NEMA Output Receptacles (Low Volt) 4 NEMA 5-15 style Hardwired 5-15 style Input Connection IEC 10A style, IEC 16A (IEC 16A Hardwired (High Volt Models) for use with computer power cable cable included) Standard Model: IEC 10A style, Attached L5-30 Input Connection for use with computer power cable input plug (cable Hardwired (Low Volt Models) included) XL Model: Hardwired Battery Battery Quantity 4 (1500 Low voltage) 3 8 20 User-Supplied External Battery (Standard Model Only) 8 (2000 High voltage) Charge Capacity Five hours to 90% (LV 1K-3K std.) / 7 Hrs to 90% (LV 6K std.) / User-Supplied External Battery (Standard Model Only) Eight hours to recover 90% capacity (LV 10K and HV models std.) Battery Monitoring Battery replacement indicator User-Supplied External Battery (Standard Model Only) Start-On-Battery Unit can be started without being connected to AC utility power -- allows for portable power source User-Supplied External Battery (Standard Model Only) User Interface Visual Operation on mains, battery, inverter, bypass and load/battery-charging levels Alarm and Controls Audible and Visual Alarms Battery Operation Mode, Low Battery, General Fault, Overload, On Bypass Control Two buttons for On/Off and Alarm Silence Communications / Management Power Management Software WINPOWER power management software, included on CD Connection Type Standard RS232 SNMP Interface Optional SNMP card Environment Operating Temperature 0C ~ 40C Humidity <95% Noise Level <45dB (LV 1K-1.5K) / <50dB (others) <55dB <60dB Standards Certification CE, UL (Low Voltage: 1K-3K only), ISO 9001 Dimensions and weights W x H x D mm Dimensions (High Volt Models) 145x200x400 145x200x465 192 x 340 x 460 260 x 717 x 570 Dimensions (Low Volt Models) 145x200x400 145x200x465 192 x 340 x 460 300 x 830 x 655 N/A N/A N/A Weight (High Volt Models) Kg 14 (XL: 7) 32 (XL: 15) 35.5 (XL: 16) 84 (XL: 35) 93 (XL: 38) (XL: 39) (XL: 55) Weight (Low Volt Models) Kg 14 (XL: 7) 18.7 (XL: 9) 35.5 (XL: 16) 132 (XL: 85) 153 (XL: 98) N/A N/A N/A

UNITED STATES 8609 Six Forks Road Raleigh, NC 27615 U.S.A. Toll Free: 1.800.356.5794 www.eaton.com/eseries www.eaton.com/dxups

Canada Ontario: 416.798.0112 Toll free: 1.800.461.9166 LATIN AMERICA South Cone: 54.11.4124.4000 Brazil: 55.11.3616.8500 Andean & Caribbean: 1.949.452.9610 Mexico & Central America: 52.55.9000.5252

Europe/Middle East/Africa Denmark: 45.3686.7910 Finland: 358.94.52.661 France: 33.1.6012.7400 Germany: 49.0.7841.604.0 Italy: 39.02.66.04.05.40 Norway: 47.23.03.65.50 Portugal: 55.11.3616.8500 Sweden: 46.8.598.940.00 United Kingdom: 44.1753.608.700

Asia Pacific Australia: 61.2.9693.9366 New Zealand: 64.0.3.343.3314 China: 86.21.6361.5599 HK/Korea/Taiwan: 852.2745.6682 India: 91.11.4223.2300 Singapore/SEA: 65.6825.1668
Eaton is a trademark of Eaton Corporation.
2009 Eaton Corporation All Rights Reserved Printed in USA DX01FXA January 2010

You might also like