SM 57

Model SM57 User Guide
APPLICATION Tom-Toms SUGGESTED MICROPHONE PLACEMENT One SM57 on each tom, or between each pair of toms, 25 mm (1 in.) to 75 mm (3 in.) above the heads. Aim each mic at the top heads. On double head toms, remove the bottom head and place a mic inside aimed at the head. 25 mm (1 in.) to 75 mm (3 in.) above the rim of the top head of the drum. Aim the mic at the head. TONE QUALITY Medium attack, balanced sound.
Medium attack, balanced sound. Most snap from drumstick impact More snare sound. Most attack, emphasized bass Medium attack, full, balanced sound
MODEL SM57
UNIDIRECTIONAL DYNAMIC MICROPHONE
The Shure SM57 unidirectional dynamic microphone is exceptional for musical instrument pickup or for vocals. With its bright, clean sound and carefully contoured presence rise, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. For musical instruments or vocals, the SM57 is a consistent choice of professional performers.
Snare Drum
If desired, place a second mic just below the rim of the bottom head. 25 mm (1 in.) from the speaker, on-axis with the speaker cone.
Guitar & Bass Amplifiers
150 mm (6 in.) to 300 mm (12 in.) away from speaker and on-axis with speaker cone.
.5 m (18 in.) to 1 m (3 ft) back from Softer attack, thin, the speaker, on-axis with the speak- reduced bass er cone. sound. On-axis with the edge of the speak- Thinner, reduced er cone. bass sound. Brass:.3 m (1 ft) to 1 m (3 ft) away, on-axis with bell of instrument. Brass & Woodwinds Woodwinds: 25 mm (1 in.) to 150 mm (6 in.) away, on-axis with bell of instrument. Bell of the instrument 90 off-axis from the front of the mic. Vocals & Speech 25 mm (1 in.) to 150 mm (6 in.) from the vocalist's mouth. Bright, clear sound. Bright, clear sound.
Features
Frequency response tailored for drums, guitars, and vocals Uniform cardioid pickup pattern isolates the main sound source while reducing background noise Pneumatic shock-mount system cuts down handling noise Extremely durable under the heaviest use Supplied break-resistant swivel adapter that rotates 180 Legendary Shure quality, ruggedness, and reliability
Softer, mellow sound. Rich, warm sound.
PROXIMITY EFFECT
When the sound source is less than 6 mm (1/4 in.) from the microphone, the microphone boosts bass frequencies (by 6 to 10 dB at 100 Hz), creating a warmer and richer bass sound than when farther away. This effect, known as proximity effect, happens in unidirectional microphones like the SM57. The SM57 low-frequency roll-off provides greater control, allowing the user to take full advantage of proximity effect.
STAGE MONITOR & P.A. LOUDSPEAKER PLACEMENT

Place the stage monitor directly behind the microphone (see Figure 1). Locate the P.A. loudspeakers so that they point away from the rear of the microphone. With the speakers located in these positions, the possibility of feedback is greatly reduced. Always check the stage setup before a performance to ensure optimum placement.
90
STAGE MONITOR P.A. LOUDSPEAKERS
GENERAL RULES FOR MICROPHONE USE

1. Aim the microphone toward the desired sound source and away from unwanted sources. 2. Locate the microphone as close as practical to the desired sound source. 3. Work close to the microphone for extra bass response. 4. Use only one microphone per sound source. 5. Locate multiple microphones at least three times as far from other microphones as from the sound source. 6. Use as few microphones as practical. 7. Place microphones away from sound reflecting surfaces. 8. Add a windscreen when using the microphone outdoors, for closeup speech, or vocals. 9. Avoid excessive handling to minimize mechanical noise.
180
MICROPHONE
90
SOUND SOURCE
RECOMMENDED LOUDSPEAKER PLACEMENT FIGURE 1
APPLICATION AND PLACEMENT

Some of the most common applications and placement techniques for the SM57 are listed in the following table. Remember that microphone technique is largely a matter of personal taste-there is no single correct microphone position.
2006, Shure Incorporated 27C2903 (Rev. 5)
Printed in U.S.A.
SPECIFICATIONS
Type Dynamic Frequency Response 40 to 15,000 Hz (see Figure 2)
Case Dark gray, enamel-painted, die-cast steel with a polycarbonate grille and a stainless steel screen.
157 mm (6 3/16 in.)
32 mm (1 1/4 in.)
23 mm (29/32in.)
DIMENSIONS FIGURE 5 Swivel Adapter Positive-action, break-resistant, adjustable through 180, with standard 5/8 in.-27 thread Net Weight (without cable) 284 grams (10 oz)
FREQUENCY IN HERTZ
TYPICAL FREQUENCY RESPONSE FIGURE 2 Polar Pattern Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency (see Figure 3)
180 150 150 150 180 150
Certification
Eligible to bear CE Marking. Conforms to European EMC Directive 89/336/EEC. Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments.
FURNISHED ACCESSORIES
120
120
120
120
Swivel Adapter............................................................. A25D Storage Bag .............................................................. 26A13
90 20 dB 15 dB 60 10 dB 5 dB 30 0
125 Hz
90
90 20 dB 15 dB
90
OPTIONAL ACCESSORIES
Windscreen ....................................................... A2WS-GRA Desk Stand .......................................................................... S37A, S39A Isolation Mount ........................................................... A55M Dual Mount....................................................... A25M, A26M Cable (7.6 m [25 ft]).................................................C25E, C25F
60
60
10 dB 5 dB 30 0
2000 Hz
60
30
30
500 Hz
1000 Hz
4000 Hz
8000 Hz
TYPICAL POLAR PATTERNS FIGURE 3 Sensitivity (at 1,000 Hz) Open Circuit Voltage: -56.0 dBV/Pa* (1.6 mV) *(1 Pa = 94 dB SPL) Impedance Rated impedance is 150 (310 actual) for connection to microphone inputs rated low impedance. Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 (see Figure 4).
CARTRIDGE CODED TERMINAL GREEN BLUE
2 3 1
REPLACEMENT PARTS
Cartridge ....................................................................... R57 Screen and Grille Assembly ..........................................RPM210 For additional service or parts information, please contact Shure Service department at 1-800-516-2525. Outside the United States, please contact your authorized Shure Service Center.
YELLOW
RED
TRANSFORMER
BLACK
INTERNAL CONNECTIONS FIGURE 4 Connector Three-pin professional audio connector (male XLR type)

SM 57

Uploaded by

Copyright:

Available Formats

SM 57

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SM 57

Uploaded by

Copyright:

Available Formats

Model SM57 User Guide

Guitar & Bass Amplifiers

Softer, mellow sound. Rich, warm sound.

STAGE MONITOR & P.A. LOUDSPEAKER PLACEMENT

GENERAL RULES FOR MICROPHONE USE

RECOMMENDED LOUDSPEAKER PLACEMENT FIGURE 1

APPLICATION AND PLACEMENT

2006, Shure Incorporated 27C2903 (Rev. 5)

Swivel Adapter............................................................. A25D Storage Bag .............................................................. 26A13

You might also like