Evolution S

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Pulsar Series

UPS

Eaton Evolution S
1250/1750/2500/3000 VA
Line interactive
High density protection for network devices

Maximum availability

Powershare: the Eaton Evolution S output sockets are  individually controlled to provide load-shedding to maximise the backup time and provide remote reboot and sequential start-up as standard  ontinuous power supply: Hot swappable batteries. C The optional HotSwap MBP (Maintenance By-Pass) module allows the UPS to be replaced without interrupting the power supply  ong backup times: 1 to 4 EXB battery units can be added to L the Evolution S  ure sinewave output: when operating in batterie mode the P Eaton Evolution still provides high quality output signal for sensitive connected equipment

Eaton Evolution S

Minimum total cost of ownership


Line-interactive HF technology: the best price/performance ratio   o additional cost: all models are provided with tower stands N and rail kits  emote supervision: a wide range of options using the Eaton R Software suite, including point-to-point power management, SNMP , relay outputs, etc...

Eaton Evolution S with EXB

Totally flexibility
Evolution has unmatched Flexibility.

Advanced protection for: Rack servers Tower servers Network devices Storage systems

 ormat: Evolution S is available in RT2U convertible rack/tower F version (optimised for rack mounting) or RT3U (for tower or short-depth racks)  onnections: with FlexPDU and HotSwap MBP the Evolution S C can be connected by sockets or terminal blocks. They can be installed as required behind, on the side or on top of the unit  ompatible with high power factor loads: the Evolution S C are rated for 0.9 total power factor (1250 VA/1150 W, 1750 VA/1600 W, 2500 VA/2250 W and 3000 VA/2700 W)  ommunication: the Evolution S includes both serial and USB C ports, plus remote On/Off connector and an extra slot for optional communication cards. The UPS comes with a complete Eaton software suite.

EATON Product Catalogue

Eaton Evolution S UPS

1250/1750/2500/3000 VA
Full user interface:  - ON/OFF button for UPS and outlets - Load protected/ not protected LED - Utilised power level/Battery charge level - Status of switchable outlets Panel for batteries replacement (Hot swappable)   1 USB port + 1 serial port + remote ON/OFF Eaton Evolution S 3000 RT2U Netpack EXB battery unit connector EXB units recognised automatically  8 IEC 10A sockets, including 4 programmable sockets Communication card slot

Technical Specifications
Rating (VA/W) Format

1250 1250 VA / 1150 W RT2U (tower / rack 2U)

1750 1750 VA / 1600 W RT2U (tower / rack 2U)

2500 2500 VA / 2250 W RT2U (tower / rack 2U)

3000 3000 VA / 2700 W RT2U & RT3U

Electrical characteristics
Technology Input voltage and frequency ranges without using batteries Output voltage and frequency Line-Interactive High Frequency (Booster + Fader) 160V-294V (adjustable to 150V-294V) 47 to 70 Hz (50 Hz system), 56.5 to 70 Hz (60 Hz system), up to 40 Hz in low-sensitivity mode (programmable using Personal Solution-Pac software. 230 V (+6/-10 %) (Adjustable to 200 V (10 % derating of output power) / 208 V / 220 V / 230 V / 240 V), 50/60 Hz +/- 0.1 % 1 IEC C14 (10 A) socket 8 IEC C13 (10 A) 1 IEC C14 (10 A) socket 8 IEC C13 (10 A) 1 IEC C20 (16 A) socket 8 IEC C13 (10 A) sockets 1 IEC C19 (16 A) socket 1 IEC C20 (16 A) socket 8 IEC C13 (10 A) sockets 1 IEC C19 (16 A) socket

Connections
Input Outputs Remotely controlled sockets Additional outputs with HS MBP Additional outputs with FlexPDU

2 groups of 2 x IEC C13 (10 A) 4 FR/Schuko sockets or 3 BS sockets or 6 IEC 10 A sockets or terminal blocks (HW version) 8 FR/Schuko sockets or 6 BS sockets or 12 IEC 10 A sockets

Batteries
Typical backup times for 50 and 70% load* Evolution S Evolution S + 1 EXB Evolution S + 4 EXB Battery management 20/14 mn 14/9 mn 17/11 mn 15/10 mn 105/60 mn 60/36 mn 85/55 mn 60/42 mn 300/200 mn 180/115 mn 290/200 mn 210/135 mn Automaticweeklytest(periodadjustable),automaticrecognitionofexternalbatteryunits=>continuousmaximisationofbackuptime + deep discharge protection 1 USB port + 1 RS232 serial port and relay contacts (USB and RS232 ports cannot be used simultaneously) + 1 mini terminal block for remote ON/OFF and Remote Power Off 1 slot for NMC Minislot card (included in Netpack versions) or NMC ModBus/JBus or MC Contacts/Serial 0 to 40C < 45 dBA < 45 dBA < 50 dBA < 50 dBA IEC/EN 62040-1-1 (Safety), IEC/EN 62040-2 EN 50091-2 class B (EMC), IEC/EN 62040-3 (Performance), IEC/EN 61000-4-2, 61000-4-3, 61000-4-4; 61000-4-5, 61000-4-6, 61000-4-8 (EMI) CE, CB report, TV 440 x 509 x 86.2 (2U) mm 24.3 kg 30.4 kg 440 x 509 x 86.2 (2U) mm 26.6 kg See UPS 30.4 kg 41.7 kg 41.7 kg 440 x 634 x 86.2 (RT2U) mm 440 x 634 x 86.2 (RT2U) mm 440 x 484 x 130.7 (RT3U) mm 440 x 484 x 130.7 (RT3U) mm 33.8 kg 33.8 kg (RT2U) - 34.3 kg (RT3U)

Interfaces
Communication ports Communications card slots

Operating conditions, standards and approvals


Operating temperature Noise Level Performance - Safety - EMC Approvals

Dimensions W x H x D / Weight
Dimensions Weight of the Tower/Rack Dimensions of EXB Weight of the EXB

Customer Service & Support


2 years warranty Warranty+ Standard product exchange, including the battery Optional 3-years warranty (depending on the country please visit www.eaton.com/powerquality)

* Runtimes are shown at 0.7 power factor. Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc.

Part Numbers
Convertible Tower/Rack EXB Models
* NMC card included in Netpack versions.

S 1250 RT2U 68 456 68 470

S 1750 RT2U 68 459 68 470

S 2500 RT2U Netpack*

S 3000 RT3U

S 3000 RT2U Netpack*

68 463 68 464 68 465 2U = 68 472 - 3U = 68 471 2U = 68 472 - 3U = 68 471 2U = 68 472 - 3U = 68 471

In the interests of continuous product improvement all specifications are subject to change without notice. 2009 Eaton Corporation, All Rights Reserved, April 2009.

You might also like