Marine Engines and Replacement Parts Section

3.0L Base Engine ................................................................................................................... 4.3L Base Engine ................................................................................................................... 4.3L Enhanced Base ................................................................................................................... 4.3L Bobtail Engine (s) ................................................................................................................... 4.3L Block Replacement Parts ....................................................................................... 4.3L Cooling Replacement Parts ........................................................................ 4.3L Electrical Replacement Parts ........................................................................ 4.3L Fuel Replacement Parts ....................................................................................... 5.0L New Long Block Green Base ....................................................................................... 5.0L Enhanced Base ....................................................................................... 5.7L Long Block Green Base ....................................................................................... 5.7L Remanufactured Long Block Service Base ..................................................................... 5.7L Enhanced Base Fuel and Spark .................................................................................... 5.7L Bobtail Carbureted Engine (s) ....................................................................................... 5.7L Block Replacement Parts / Carbureted .................................................................. 5.7L Cooling Replacement Parts / Carbureted .............................................................. 5.7L Electrical Replacement Parts / Carbureted ............................................................ 5.7L Fuel Replacement Parts / Carbureted ..................................................................... 5.7L Bobtail MPI Engine (s) ..................................................................................................... 5.7L Block Replacement Parts / MPI .............................................................................. 5.7L Cooling Replacement Parts / MPI .......................................................................... 5.7L Electrical Replacement Parts / MPI ........................................................................ 5.7L Fuel Replacement Parts / MPI ................................................................................. 6.0L MPI Green Base ..................................................................................................... 7.4L H.O Long Block ................................................................................................................... 8.1L GM EFI Base ................................................................................................................... LS3 ................................................................................................................................................ LSA ................................................................................................................................................ Marine Engine Parts Kits Miscellaneous Replacement Parts Kits ....................................................................................... Closed Cooling Kits - Half and Full Systems ........................................................................ Transmissions ................................................................................................................................................ Its The Law Know Your Rights ................................................................................................................... Warranty / One Year Engines and Parts ..................................................................................................... Warranty / Two Year Engines ...................................................................................................................

Table of Contents

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

29-31 32 33 34 35 36 37 39

NEW 3.0L GM Base Marine Engine

Indmar Part # 051079N
The Indmar 3.0L new base engine includes the following (when ordered under the above part number). Block (with all internal components) Harmonic Balancer Valve Cover Water Circulating Pump Electronic Distributor Timing Chain Cover Spark Plugs High Output Coil Interrupter Harness 14 Flywheel Timing Shunt Cable / Coil to Distributor Oil Pan Power Tach Lead
Specifications Displacement: 181 C.I.D. (2966.59 CC) / 3.0L Cylinders: In-Line 4 Cylinder Comp. Ratio: 9.25:1 (High Flow Vortec Head) Valve Config.: Pushrod Actuated / Overhead Valves Valve Lifters: Hydralic Flat Tappet Bore x Stroke: 4.00 x 3.60 (101.60 x 91.44 mm) Main Bearings: 2 Bolt Cast Iron Ignition: Delco EST (Electronic) Intake/Exhaust Manifold: Customer Supplied Block MFG.: GM Powertrain Flywheel Dia.: 14 (Ring Gear Towards Engine) Firing Order: 1342 Oil Pan Capacity: 4 Quarts (W/O Filter) Oil Type: SAE 15W40 Pennzoil Marine Paint Protectant: High Gloss Black / Superior Corrosion Resistant Horsepower: 140 H.P. @ 4800 RPM (Carburetor) Torque: 177 lb-ft @ 3600 RPM Warranty: 1 Year Limited (90 Days Commercial)

Note: Actual power levels may vary depending on Indmars calibration and application.

Indmar is currently working on Bobtail versions of this engine! Please call for availability!

www.barrmarine.net Toll Free: 866-255-9265

NEW 4.3L GM Base Marine Engine

Indmar Part # 051028N
The Indmar 4.3L new base engine includes the following (when ordered under the above part number). Block (with all internal engine components) Water Circulating Pump 14 Flywheel Harmonic Balancer Timing Chain Cover Cast Iron Intake (2 barrel) Valve Covers Spark Plugs Oil Pan

Displacement: Cylinders: Comp. Ratio: Valve Config.: Valve Lifters: Bore x Stroke: Main Bearings Caps Ignition: Intake Manifold: Block MFG.: Flywheel Dia.: Firing Order: Oil Pan Capacity: Oil Type: Paint Protectant: Horsepower: Torque: Warranty:

Specifications

262 C.I.D. (4294 CC) / 4.3L 90 Degree V6 Cylinder 9.4:1 Overhead Valves (2 valves per cylinder) Hydralic Roller 4.00 x 3.48 (101.60 x 88.39 mm) Cast Iron GM232-M Customer Supplied Cast Iron (2 Barrel Carburetor) GM Powertrain 14 (Ring Gear Towards Engine) 1 6 - 5 - 4 - 3 - 2 4.5 Quarts (W/O Filter) SAE 15W40 Pennzoil Marine High Gloss Black / Superior Corrosion Resistant 223 H.P. @ 4800 RPM (Carburetor) 267 lb-ft @ 2800 RPM 1 Year Limited (90 Days Commercial)

Note: Actual power levels may vary depending on Indmars calibration and application.

Available Options:

-A full range of new replacement parts needed to complete the build up!

www.barrmarine.net Toll Free: 866-255-9265

NEW 4.3L GM Enhanced Base Marine Engine

Indmar Part # 051000
The Indmar 4.3L new Enhanced Base engine includes the following (when ordered under the above part number).

Block (with all internal engine components) Harmonic Balancer Valve Covers Water Circulating Pump Timing Chain Cover Spark Plugs 14 Flywheel Oil Pan Plug Wires Electronic Distributor (HEI-Delco) Fuel Pump (electronic) Coil Carburetor (Holley/600 cfm) Thermostat Housing T-HSG Hose
Displacement: Cylinders: Comp. Ratio: Valve Config.: Valve Lifters: Bore x Stroke: Main Bearings Caps Ignition: Intake Manifold: Block MFG.: Flywheel Dia.: Firing Order: Oil Pan Capacity: Oil Type: Paint Protectant: Horsepower: Torque: Warranty:

Specifications

262 C.I.D. (4294 CC) / 4.3L 90 Degree V6 Cylinder 9.4:1 Overhead Valves (2 valves per cylinder) Hydralic Roller 4.00 x 3.48 (101.60 x 88.39 mm) Cast Iron GM232-M Customer Supplied Cast Iron (4 Barrel Carburetor) GM Powertrain 14 (Ring Gear Towards Engine) 1 6 - 5 - 4 - 3 - 2 4.5 Quarts (W/O Filter) SAE 15W40 Pennzoil Marine High Gloss Black / Superior Corrosion Resistant 223 H.P. @ 4800 RPM (Carburetor) 267 lb-ft @ 2800 RPM 1 Year Limited (90 Days Commercial)

Note: Actual power levels may vary depending on Indmars calibration and application.

Available Options:

-A full range of new replacement parts needed to complete the build up! The Indmar Enhanced Base fuel and spark is brand new and the perfect engine for the boater who requires a new power plant in their boat. This engine is an excellent replacement for customer who has existing components they want to re-install to get their boat back in the water!

www.barrmarine.net Toll Free: 866-255-9265

NEW 4.3L GM Bobtail Marine Engine

The Indmar 4.3L Bobtail engine includes the following (when ordered under the above part number). Coupler (Volvo or MerCruiser) Starter (bottom mount) Fuel/Water Sep. (I/O only) Engine Wiring Harness P/U Pump (when applicable)

The Indmar Enhanced Base Plus

Alternator Throttle Linkage Flame Arrestor Dipstick and Tube Weather Cover E Z Oil Drain Crank Pulley Circ. Pump Pulley Torsion Damper (where applicable)

Exhaust System (Volvo or MerCruiser) Flywheel Hsg. (where applicable) High Gloss Paint (non-corrosive) Dust Cover (where applicable)

The Bobtail engines by Indmar are built only with premium components to insure many years of boating! These super high quality engines have everything factory installed to make sure your customers complete engine replacement is a smooth transaction! Please give the folks at Barr Marine By EDM or one of our very fine engine distributors a call and we will be glad to help you get started breathing life back into your boat! Bobtail without exhaust Bobtail with Merc exhaust I/O Bobtail with Volvo exhaust I/O Inboard Bobtail with exhaust Carb Bobtail with Merc exhust I/O with Power Steering Part# 04330V Carb Bobtail with Volvo exhust I/O with Power Steering Note: Closed cooling system, power steering system, and fuel water seperator are shown but must be purchased in addition to the bobtail engine. Fuel / water seperator is only included on I/O Bobtails only (at no extra charge). Part# 051002 Part# 051002M Part# 051002VO Part# 051003 Part# 04430M

Available Options:

-Power Steering System (w/ oil cooler) -Closed Cooling (Half or Full System)

www.barrmarine.net Toll Free: 866-255-9265

Replacement Block Components and Related Parts For The 4.3L Carbureted Engine
All replacement parts are from only the best manufacturers and are used on our production engines as well!

885016

531009

535033

8 0006

535011 4.3L Block Components

Part Number
8 0006 535011 535015R 535015L 535021 535032 551660 551661

MC 8 66418
Part Description

MC 8 66418 885016 531009 535033 531005 531004 515003KIT 25 1000 495121

Part Number

Front Engine Mount (Merc. replacement-in pairs) Drive Plate (torsion damper) Flywheel Housing (bottom mount starter) Splash Plate (bottom mount starter) Front Engine Mount, RH (to block) Front Engine Mount, LH (to block) E-Z Oil Drain Kit (metric thread) Power Steering Kit (only installed at Barr Marine) Remote Oil Filter Kit

Part Description

Stringer Mount (for #MC 8 66418) Transmission Mount (for direct drive ZF Trans.) Trans. Mount (RH-for reduction and V-Drive ZF) Trans. Mount (LH-for reduction and V-Drive ZF) Trunion (for #531004 & 5) Stringer Mount (flat) Dipstick (V6 engine) Dipstick Tube (V6 engine)

ment or sold already installed on an Indmar bobtail engine! It is recommended that the new Power Steering System is installed on all bobtail engines.

Note: The Barr Power Steering System is not for sale unless sold as a direct replace-

www.barrmarine.net Toll Free: 866-255-9265

Replacement Cooling System and Related Parts For The 4.3L Carbureted Engine
All replacement parts are from only the best manufacturers and are used on our production engines as well!

981108

981204

685001

041242

041494
Part Number

645001
Part Description

CHV 29 80
Part Number

MC 2 17437
Part Description

4.3L Cooling System

981001 981108 981204 685001 685000 845010 551240 041242 551241 041494 531067 Pick Up Pump Bracket (old style) Pick Up Pump Bracket A (new style) Pick Up Pump Bracket B (new style) Pick Up Pump, Complete (pump only) Pick Up Pump Rebuild Kit Hose, Circ. Pump to Thermostat Housing Single Groove Circ. Pump Pulley Dual Groove Circ. Pump Pulley Single Groove Crank Pulley Dual Groove Crank Pulley Thermostat Housing (low profile) CHV 29 80 531093 986034 MC47 27 53045 551045 MC 2 17437 MC47 27 34897 645001 BA 37 0350 BA 37 0000 531015 Thermostat Housing (Barr style) 1/2 Spacer, T-Stat Housing Thermostat (drilled for FWC) Gasket, Intake to Thermostat Housing Circulation Pump (GM Style) Circulation Pump (Barr style) Gasket, Circ Pump to Engine Temperature Sender Closed Cooling System (full) Closed Cooling System (half) Thermostat Housing (Indmar Style)

Note: See the Barr Marine By EDM catalog for exhaust system options. All bobtail

engines purchased with exhaust will automatically includes center rise exhaust systems ONLY!

www.barrmarine.net Toll Free: 866-255-9265

Replacement Electrical System and Related Parts For The 4.3L Carbureted Engine
All replacement parts are from only the best manufacturers and are used on our production engines as well!

571006

575010

MC 27 93175

BA 27 0430

801059
Part Number

556096
Part Description

556194
Part Number

80 473037
Part Description

4.3L Electrical System

571006 551306 805061 755001 575003 573001 575001 575010 MC 27 93175 BA 27 0430 27 0430 50 170 235 801059 Bottom Mount Starter Starter Bolt (single, bottom mount) Starter Relay (carbureted) Starter Solenoid (bottom mount) Starter Solenoid (top mount) Top Mount Starter (LH) Top Mount Starter (RH) Alternator (70 AMP) Alternator Bracket (upper) Alternator Bracket (lower) Bushing For 93175 Mounting Bolt For 93175 Wire Harness 556096 556051 556084 556194 551006 551037 550003 80 473037 801012 986045 50 270 012 725036 805012

Ignition Module Relay, Ignition and Fuel Pump Rotor (distributor) Pick Up Coil (distributor) Clamp, Distributor Clamp Bolt, Distributor Distributor Kit Wire Harness Adaptor (cannon style to square) Timing Shunt Lifting Eye (single) Lock Washer For 93175 Alternator Belt (vee) Spacer For Wire Harness

www.barrmarine.net Toll Free: 866-255-9265

Replacement Fuel System and Related Parts For The 4.3L Carbureted Engine
All replacement parts are from only the best manufacturers and are used on our production engines as well!

BA 45 80492

981089

12550460

496002

496007

525007

BA 45 188115

IND 45

525007 496007 BA 45 188115 605006 601008 12550460 MC 45 0005 981089 BA 45 KIT

Part Number

Flame Arrestor w/ Vent Tube for I.D. Hose Fuel Pump Safety Switch Fuel Line (pump to carburetor) Fitting, 90 degree elbow (line in pump) Fitting, Inverted Flare (pump to fuel line) Intake Manifold (4 barrel/cast iron) Carburetor Gasket Throttle Bracket (Quest style) Fuel/Water Separator Kit

Part Description

4.3L Fuel System

IND 45 496002 986024 605036 695002 500001

Part Number

Throttle Bracket (Holley style) Carburetor Wedge Kit Rossette Knob (for flame arrestor) Hose, Vent Tube to Flame Arrestor Throttle Cable Clip Electronic Fuel Pump Kit Carburetor (600 CFM/4 barrel) Carburetor Adaptor (spread bore to square bore) Intake Manifold (2 barrel/take off)

Part Description

BA 45 80492 BA 45 1932 425036

www.barrmarine.net Toll Free: 866-255-9265

5.0L GM Long Block/Green (vortec)Marine Engine

Indmar Part # 05170G
The Indmar 5.0L new Long Block engine includes the following (when ordered under the above part number).

NEW

Block (with all internal engine components) Harmonic Balancer Water Circulating Pump Timing Chain Cover 14 Flywheel Oil Pan
Displacement: Cylinders: Comp. Ratio: Valve Config.: Valve Lifters: Bore x Stroke: Main Bearings Caps: Ignition: Intake Manifold: Block MFG.: Flywheel Dia.: Firing Order: Oil Pan Capacity: Oil Type: Horsepower: Torque: Warranty:

Valve Covers Spark Plugs

Specifications

350 C.I.D. (5736 CC) / 5.7L 90 Degree V8 Cylinder 9.4:1 Overhead Valves (2 valves per cylinder) Hydralic Roller 4.00 x 3.48 (101.60 x 88.39 mm) Cast Iron GM232-M Customer Supplied Customer Supplied (Vortec Style) GM Powertrain 14 (Ring Gear Towards Engine) 1-8-4-3-6-5-7-2 5.5 Quarts (With Filter) SAE 15W40 Pennzoil Marine 292 H.P. @ 4800 RPM (Carburetor) 370 lb-ft @ 3200 RPM 1 Year Limited (90 Days Commercial)

Note: Actual power levels may vary depending on Indmars calibration and application.

Available Options:

-Reverse (Right Hand) Rotation Order Part # 042001 -A full range of new replacement parts needed to complete the build up! -12 3/4 Flywheel Order Part # 24-14088650

www.barrmarine.net Toll Free: 866-255-9265

NEW 5.0L GM Enhanced Base Marine Engine

Indmar Part # 041005
The Indmar 5.0L new Enhanced Base engine includes the following (when ordered under the above part number).

Block (with all internal engine components) Harmonic Balancer Valve Covers Water Circulating Pump Timing Chain Cover Spark Plugs 14 Flywheel Oil Pan Plug Wires Electronic Distributor (HEI-Delco) Fuel Pump (electronic) Coil Carburetor (Holley/4150-600 CFM) Thermostat Housing T-HSG Hose
Displacement: Cylinders: Comp. Ratio: Valve Config.: Valve Lifters: Bore x Stroke: Main Bearings Caps: Ignition: Intake Manifold: Block MFG.: Flywheel Dia.: Firing Order: Oil Pan Capacity: Oil Type: Horsepower: Torque: Warranty:

Specifications

350 C.I.D. (5736 CC) / 5.7L 90 Degree V8 Cylinder 9.4:1 Overhead Valves (2 valves per cylinder) Hydralic Roller 4.00 x 3.48 (101.60 x 88.39 mm) Cast Iron GM232-M Customer Supplied 4 Barrel (Vortec Style) GM Powertrain 14 (Ring Gear Towards Engine) 1-8-4-3-6-5-7-2 5.5 Quarts (With Filter) SAE 15W40 Pennzoil Marine 310 H.P. @ 4800 RPM (Carburetor) 370 lb-ft @ 3200 RPM 1 Year Limited (90 Days Commercial)

Available Options:

Note: Actual power levels may vary depending on Indmars calibration and application.

-Reverse (Right Hand) Rotation Order Part # 042000 -A full range of new replacement parts needed to complete the build up! -12 3/4 Flywheel Order Part # 24-14088650 The Indmar Enhanced Base fuel and spark is brand new and the perfect engine for the boater who requires a new power plant in their boat. This engine is an excellent replacement for customer who has existing components they want to re-install to get their boat back in the water!

www.barrmarine.net Toll Free: 866-255-9265

10

5.7L GM Long Block/Green (vortec)Marine Engine

Indmar Part # 051038G
The Indmar 5.7L new Long Block engine includes the following (when ordered under the above part number).

NEW

Block (with all internal engine components) Harmonic Balancer Water Circulating Pump Timing Chain Cover 14 Flywheel Oil Pan
Displacement: Cylinders: Comp. Ratio: Valve Config.: Valve Lifters: Bore x Stroke: Main Bearings Caps: Ignition: Intake Manifold: Block MFG.: Flywheel Dia.: Firing Order: Oil Pan Capacity: Oil Type: Horsepower: Torque: Warranty:

Valve Covers Spark Plugs

Specifications

350 C.I.D. (5736 CC) / 5.7L 90 Degree V8 Cylinder 9.4:1 Overhead Valves (2 valves per cylinder) Hydralic Roller 4.00 x 3.48 (101.60 x 88.39 mm) Cast Iron GM232-M Customer Supplied Customer Supplied (Vortec Style) GM Powertrain 14 (Ring Gear Towards Engine) 1-8-4-3-6-5-7-2 5.5 Quarts (With Filter) SAE 15W40 Pennzoil Marine 292 H.P. @ 4800 RPM (Carburetor) 370 lb-ft @ 3200 RPM 1 Year Limited (90 Days Commercial)

Note: Actual power levels may vary depending on Indmars calibration and application.

Available Options:

-Reverse (Right Hand) Rotation Order Part # 042001 -A full range of new replacement parts needed to complete the build up! -12 3/4 Flywheel Order Part # 24-14088650

www.barrmarine.net Toll Free: 866-255-9265

11

REMANUFACTURED 5.7L GM Service Base (vortec) Marine Engine

Indmar Part # 021039-1030
The Indmar 5.7L Service Base engine includes the following (when ordered under the above part number).

Block (with all internal engine components) Water Circulating Pump Oil Pan

Harmonic Balancer Timing Chain Cover

Valve Covers Spark Plugs

The Service Base engines by Indmar are built only with premium components to insure many years of boating! These engines are fitted with General Motors Vortec heads and can be purchased in either Left Hand (standard) or Right Hand (opposite) rotation. The Indmar Service Base engines are offered in a long block configuration and are perfect for the customer who wants to re-use their existing engine parts to complete the repower! All of the components in our engines are totally re-machined, decked and pressure tested to NASCAR specifications at our own facility! This will provide you with the peace of mind that you have made the right choice in purchasing the BEST remanufactured marine engine on the market today. Please give the folks at Barr Marine By EDM or one of our very fine engine distributors a call and we will be glad to help you get started breathing life back into your boat!

Available Options:

-Reverse (Right Hand) Rotation Order Part # 031039-1030 -A full range of new replacement parts needed to complete the build up! -12 3/4 Flywheel Order Part # 24-14088650

Flywheel not included in engine package.

www.barrmarine.net Toll Free: 866-255-9265

12

Indmar Part # 041000

NEW 5.7L GM Enhanced Base Marine Engine

5.7L GM Enhanced Base Marine Engine

Indmar Part # 041009

5.7L GM Enhanced Base MPI

The Indmar 5.7L new Enhanced Base engine includes the following (when ordered under the above part number).

Block (with all internal engine components) Harmonic Balancer Valve Covers Water Circulating Pump Timing Chain Cover Spark Plugs 14 Flywheel Oil Pan Plug Wires Electronic Distributor (HEI-Delco) Fuel Pump (electronic) Coil Carburetor (Holley/4150-600 CFM) Thermostat Housing T-HSG Hose
Displacement: Cylinders: Comp. Ratio: Valve Config.: Valve Lifters: Bore x Stroke: Main Bearings Caps: Ignition: Intake Manifold: Block MFG.: Flywheel Dia.: Firing Order: Oil Pan Capacity: Oil Type: Horsepower: Torque: Warranty:

Specifications

350 C.I.D. (5736 CC) / 5.7L 90 Degree V8 Cylinder 9.4:1 Overhead Valves (2 valves per cylinder) Hydralic Roller 4.00 x 3.48 (101.60 x 88.39 mm) Cast Iron GM232-M Customer Supplied 4 Barrel (Vortec Style) GM Powertrain 14 (Ring Gear Towards Engine) 1-8-4-3-6-5-7-2 5.5 Quarts (With Filter) SAE 15W40 Pennzoil Marine 310 H.P. @ 4800 RPM (Carburetor) 370 lb-ft @ 3200 RPM 1 Year Limited (90 Days Commercial)

Available Options:

Note: Actual power levels may vary depending on Indmars calibration and application.

-Reverse (Right Hand) Rotation Order Part # 042000 -A full range of new replacement parts needed to complete the build up! -12 3/4 Flywheel Order Part # 24-14088650 The Indmar Enhanced Base fuel and spark is brand new and the perfect engine for the boater who requires a new power plant in their boat. This engine is and excellent replacement for customer who has existing components they want to re-install to get their boat back in the water!

www.barrmarine.net Toll Free: 866-255-9265

13

NEW 5.7L GM Bobtail Carbureted Marine Engine

The Indmar 5.7L Bobtail engine includes the following (when ordered under the above part number). Coupler (Volvo or MerCruiser) Starter (bottom mount) Fuel/Water Sep. (I/O only) Engine Wiring Harness P/U Pump (when applicable)

The Indmar Enhanced Base Plus:

Alternator Throttle Linkage Flame Arrestor Dipstick and Tube Weather Cover E Z Oil Drain Crank Pulley Circ. Pump Pulley Torsion Damper (where applicable)

Exhaust System (Volvo or MerCruiser) Flywheel Hsg. (where applicable) High Gloss Paint (non-corrosive) Dust Cover (where applicable)

The Bobtail engines by Indmar are built only with premium components to insure many years of boating! These super high quality engines have everything factory installed to make sure your customers complete engine replacement is a smooth transaction! Please give the folks at Barr Marine By EDM or one of our very fine engine distributors a call and we will be glad to help you get started breathing life back into your boat! Part# 041002 Bobtail without exhaust Part# 041002A Bobtail with exhaust Part# 041002M Bobtail MerCruiser I/O Part# 041002VO Bobtail Volvo I/O Part# 04002 Bobtail without Exhaust RH inboard Part# 04002A Bobtail with exhaust RH inboard Part# 04570M Carb Bobtail with Merc Exhaust I/O with Power Steering Part# 04570MF Carb Bobtail with Merc Exhaust I/O with Power Steering and Fresh Water Cooling Part# 04570MIF Carb Bobtail with Merc Exhaust Inboard with Fresh Water Cooling Part# 04570MIFR Carb Bobtail with Merc Exhaust Inboard with Fresh Water Cooling Right Hand Part# 04570V Carb Bobtail with Volvo Exhaust I/O with Power Steering Part# 04570VF Carb Bobtail with Volvo Exhaust I/O with Power Steering and Fresh Water Cooling

Note: Power steering system is shown but must be purchased in addition to the bobtail engine. Fuel / water seperator is only included on I/O Bobtails only (at no extra charge).

Available Options:

-Power Steering System (w/ oil cooler) -Closed Cooling (Half or Full System) -Top Mounted Starter (LH or RH Rotation)

www.barrmarine.net Toll Free: 866-255-9265

14

Replacement Block Components and Related Parts For The 5.7L Carbureted Engine
All replacement parts are from only the best manufacturers and are used on our production engines as well!

CR 23 350

551040

551455

MC 24 44187

MC 24 14043
MC 8 66418 885016 531009 535033 531005 531004 515003KIT 551600 CR 23 350 551040 551455 556222 556222-OR 551654 25 1000 505001

535021 885016 5.7L Block Components

Part Number
8 0006 535011 535015R 535015L 535021 535032

535032
Part Description

Part Number

Front Engine Mount (Merc. replacement-in pairs) Drive Plate (torsion damper) Flywheel Housing (bottom mount starter) Splash Plate (bottom mount starter) Front Engine Mount, RH (to block) Front Engine Mount, LH (to block) E Z Drain Oil Kit (metric thread) Oil Pan Kit Oil Pan (Aluminum) Dipstick Tube

Part Description

Stringer Mount (for #MC 8 66418) Transmission Mount (for direct drive ZF Trans.) Trans. Mount (RH-for reduction and V-Drive ZF) Trans. Mount (LH-for reduction and V-Drive ZF) Trunion (for #531004 & 5) Stringer Mount (flat) Valve Cover Kit Harmonic Balancer Oil Filter Remote Oil Filter Kit Flywheel, Bottom Mount, 14 (1 pc rear seal)

Dipstick Timing Chain Cover (LH) Timing Chain Cover (RH) Cylinder Head Gasket Power Steering Kit PCV Valve (90 degree type)

556000 551350 501001 495121 551043 551044 24-14088650 MC 24 44187 MC 24 14043 506002

Flywheel, Top Mount, 14 (1 pc rear seal) Flywheel, Bottom Mount, 12 3/4 (1 pc rear seal) Flywheel Housing (top/bottom mount) Splash Plate (for MC 24 44187) PCV Valve (straight type)

ment or sold already installed on an Indmar bobtail engine! It is recommended that the new Power Steering System is installed on all bobtail engines.
www.barrmarine.net Toll Free: 866-255-9265

Note: The Indmar Power Steering System is not for sale unless sold as a direct replace-

15

Replacement Cooling System and Related Parts For The 5.7L Carbureted Engine
All replacement parts are from only the best manufacturers and are used on our production engines as well!

685001

845010

551240

551241

531067
981001 981108 981204 685001 685000 845010 551240 041242 551241 041494 531067

645001 531093 5.7L Cooling System

Part Description Part Number
CHV 29 80 531093 986034 MC47 27 53045 551045 MC 2 17437 MC47 27 34897 645001 531015 BA 37 0350 BA 37 0000

981001
Part Description

Part Number

Pick Up Pump Bracket (old style) Pick Up Pump Bracket A (new style) Pick Up Pump Bracket B (new style) Pick Up Pump, Complete (pump only) Pick Up Pump Rebuild Kit Hose, Circ. Pump to Thermostat Housing Single Groove Circ. Pump Pulley Dual Groove Circ. Pump Pulley Single Groove Crank Pulley Dual Groove Crank Pulley Thermostat Housing (low profile)

Thermostat Housing (Barr style) 1/2 Spacer, T-Stat Housing Thermostat (drilled for FWC) Gasket, Intake to Thermostat Housing Circulation Pump (GM Style) Circulation Pump (Barr style) Gasket, Circ Pump to Engine Temperature Sender Thermostat Housing (Indmar Style) Closed Cooling System (full) Closed Cooling System (half)

Note: See the Barr Marine By EDM catalog for exhaust system options. All bobtail

engines purchased with exhaust will automatically includes center rise exhaust systems ONLY! Log style exhaust system may be used in place of at an additional cost to the

www.barrmarine.net Toll Free: 866-255-9265

16

Replacement Electrical System and Related Parts For The 5.7L Carbureted Engine
All replacement parts are from only the best manufacturers and are used on our production engines as well!

986108

573001

575010

571006

986238
Part Number

801059
Part Description

556083
Part Number

801012
Part Description

5.7L Electrical System

556161 571006 551306 805061 755001 575003 573001 575001 575010 986108 986238 725018 801059 Spark Plug Bottom Mount Starter Starter Bolt (single, bottom mount) Starter Relay (carbureted) Starter Solenoid (bottom mount) Starter Solenoid (top mount) Top Mount Starter (LH) Top Mount Starter (RH) Alternator (70 AMP) Alternator Bracket (rear) Alternator Bracket (front) Alternator Belt (vee) Wire Harness 556096 556051 556084 556194 551006 551037 550002 80 473037 801012 986045 805012 556083

Ignition Module Relay, Ignition and Fuel Pump Rotor (distributor) Pick Up Coil (distributor) Clamp, Distributor Clamp Bolt, Distributor Distributor Kit Wire Harness Adaptor (cannon style to square) Timing Shunt Lifting Eye (single) Spacer For Wire Harness Distributor Cap

www.barrmarine.net Toll Free: 866-255-9265

17

Replacement Fuel System and Related Parts For The 5.7L Carbureted Engine
All replacement parts are from only the best manufacturers and are used on our production engines as well!

525006

781003

981076

695002

MC 45 0001
Part Number

841010

611034
Part Number
695002 500001 986024 611034 611015 BA 45 KIT MC 45 0001 496002 841010 981089

531170
Part Description

525006 781003 496007 981076 605006 601008 556099 531170 N/A (call) 611031

Flame Arrestor w/ Vent Tube for 3/8 I.D. Hose F-Line (fuel line to carburetor fitting) Fuel Pump Safety Switch Fuel Line (pump to carburetor) 90 Degree Fuel Fitting (line in) Inverted Flare Fuel Fitting (pump to fuel line) Intake Gasket Intake Manifold, 4 brl. (alm. w/ bronze cross-over) Intake Manifold, 4 barrel (cast iron) Carburetor Gasket (Holley-thick)

Part Description

5.7L Fuel System

Throttle Cable Clip Electronic Fuel Pump Kit Rossette Knob (for flame arrestor) Carburetor (600 CFM/4 barrel) Carburetor Repair Kit (for # 611034) Fuel/Water Seperator Kit Throttle Bracket (universal Holley style) Carburetor Wedge Kit Vent Hose (valve cover to flame arrestor) Throttle Bracket (Indmar style)

www.barrmarine.net Toll Free: 866-255-9265

18

The Indmar 5.7L Bobtail engine includes the following (when ordered under the above part number). Coupler (Volvo or MerCruiser) Starter (bottom mount) Fuel/Water Sep. (I/O only) Engine Wiring Harness P/U Pump (when applicable) Alternator Throttle Linkage Exhaust System (Volvo or MerCruiser) Flame Arrestor Dipstick and Tube Flywheel Hsg. (where applicable) Circ. Pump Pulley E Z Oil Drain High Gloss Paint (non-corrosive) Crank Pulley Torsion Damper (where applicable) Dust Cover (where applicable)
The Bobtail engines by Indmar are built only with premium components to insure many years of boating! These super high quality engines have everything factory installed to make sure your customers complete engine replacement is a smooth transaction! Please give the folks at Barr Marine By EDM or one of our very fine engine distributors a call and we will be glad to help you get started breathing life back into your boat! Part# 041003 Bobtail without exhaust Part# 041003A Bobtail with exhaust Part# 041003M Bobtail Mercruiser I/O Part# 041003VO Bobtail Volvo I/O Part# 042003 Bobtail without Exhaust RH inboard Part# 042003A Bobtail with exhaust RH inboard Part# 04571M MPI Bobtail with exhaust Merc I/O with power steering Part# 04571MF MPI Bobtail with exhaust Merc I/O with power steering and fresh water cooling Part# 04571MIF MPI Bobtail with exhaust Merc inboard with fresh water cooling Part# 04571V MPI Bobtail with exhaust Volvo I/O with power steering Part# 04571 MPI Bobtail with exhuast Volvo I/O with power steering and fresh water cooling

NEW 5.7L GM Bobtail MPI Marine Engine

Note: Power steering system is shown but must be purchased in addition to the bobtail engine. Fuel / water seperator is only included on I/O Bobtails only (at no extra charge).

Available Options:

-Power Steering System (w/ oil cooler) -Closed Cooling (Half or Full System) -Top Mounted Starter (LH or RH Rotation)

www.barrmarine.net Toll Free: 866-255-9265

19

Replacement Block Components and Related Parts For The 5.7L MPI Engine
All replacement parts are from only the best manufacturers and are used on our production engines as well!

551044

551040

551455

MC 24 44187

MC 24 14043
MC 8 66418 885016 531009 535033 531005 531004 515003KIT 551600 CR 23 350 551040 551455 556222 556222-OR 551654 25 1000 551379

Part Number

Front Engine Mount (Merc. replacement-in pairs) Drive Plate (torsion damper) Flywheel Housing (bottom mount starter) Splash Plate (bottom mount starter) Front Engine Mount, RH (to block) Front Engine Mount, LH (to block) E Z Drain Oil Kit (metric thread) Oil Pan Kit Oil Pan (Aluminum) Dipstick Tube Dipstick Timing Chain Cover (LH) Timing Chain Cover (RH) Cylinder Head Gasket Power Steering Kit Oil Pressure Sensor (digital)

Part Description

885016 535021 5.7L Block Components

8 0006 535011 535015R 535015L 535021 535032 556000 556293 501001 495121 551043 551044 551350 MC 24 44187 MC 24 14043 556102

535032
Part Description

Part Number

Stringer Mount (for #MC 8 66418) Transmission Mount (for direct drive ZF Trans.) Trans. Mount (RH-for reduction and V-Drive ZF) Trans. Mount (LH-for reduction and V-Drive ZF) Trunion (for #531004 & 5) Stringer Mount (flat) Valve Cover Kit Crank Position Sensor Oil Filter Remote Oil Filter Kit Flywheel, Bottom Mount, 14 (1 pc rear seal) Flywheel, Top Mount, 14 (1 pc rear seal) Harmonic Balancer Flywheel Housing (top/bottom mount) Splash Plate (for MC 24 44187) MAP Sensor

ment or sold already installed on a Quest bobtail engine! It is recommended that the new Power Steering System is installed on all bobtail engines.
www.barrmarine.net Toll Free: 866-255-9265

Note: The Indmar Power Steering System is not for sale unless sold as a direct replace-

20

Replacement Cooling System and Related Parts For The 5.7L MPI Engine
All replacement parts are from only the best manufacturers and are used on our production engines as well!

685001

981108

981204

531067

845010
Part Number

041242

041494
Part Number
CHV 29 80 531093 986034 MC47 27 53045 551045 MC 2 17437 MC47 27 34897 645001 531015 BA 37 0350 BA 37 0000

531015
Part Description

5.7L Cooling System

981001 981108 981204 685001 685001 845010 551240 041242 551241 041494 531067 556013 Pick Up Pump Bracket (old style) Pick Up Pump Bracket A (new style) Pick Up Pump Bracket B (new style) Pick Up Pump, Complete (pump only) Pick Up Pump Rebuild Kit Hose, Circ. Pump to Thermostat Housing Single Groove Circ. Pump Pulley Dual Groove Circ. Pump Pulley Single Groove Crank Pulley Dual Groove Crank Pulley Thermostat Housing (low profile) Coolant Temperature Sender

Part Description

Thermostat Housing (Barr style) 1/2 Spacer, T-Stat Housing Thermostat (drilled for FWC) Gasket, Intake to Thermostat Housing Circulation Pump (GM Style) Circulation Pump (Barr style) Gasket, Circ Pump to Engine Temperature Sender Thermostat Housing (Indmar Style) Closed Cooling System (full) Closed Cooling System (half)

Note: See the Barr Marine By EDM catalog for exhaust system options. All bobtail

engines purchased with exhaust will automatically includes center rise exhaust systems ONLY! Log style exhaust system may be used in place of at an additional cost to the engine package.

www.barrmarine.net Toll Free: 866-255-9265

21

Replacement Electrical System and Related Parts For The 5.7L MPI Engine
All replacement parts are from only the best manufacturers and are used on our production engines as well!

571006

573001

575010

556096
Part Number Part Description

556083 5.7L Electrical System(MPI)

Part Number
556096 556084 556194 551006 551037 80 473037 986108 986238 724018

80 473037
Part Description

556199 571006 551306 986045 755001 575003 573001 575001 575010

Spark Plug Bottom Mount Starter Starter Bolt (single, bottom mount) Lifting Eye (single) Starter Solenoid (top mount) Starter Solenoid (bottom mount) Top Mount Starter (LH) Top Mount Starter (RH) Alternator (70 AMP)

Ignition Module Rotor (distributor) Pick Up Coil (distributor) Clamp, Distributor Clamp Bolt, Distributor Wire Harness Adaptor (cannon style to square) Alternator Bracket (rear) Alternator Bracket (front) Alternator Belt (vee)

www.barrmarine.net Toll Free: 866-255-9265

22

Replacement Fuel System and Related Parts For The 5.7L MPI Engine
All replacement parts are from only the best manufacturers and are used on our production engines as well!

521119

811127

521119 556099 531125 506002 505001 811127

Part Number

Flame Arrestor For MPI Engine Intake Gasket Intake Manifold (PFI) PCV Valve (straight type) PCV Valve (90 degree type) Hose, Vent To Flame Arrestor

Part Description

5.7L Fuel System (MPI)

556014 556114 636125 556049 556104 556103

Part Number

Fuel Pump (w/ return line to tank) Throttle Body Gasket Fuel Pressure Regulator (4 bar) Fuel Injector IAC Valve Throttle Position Sensor

Part Description

www.barrmarine.net Toll Free: 866-255-9265

23

NEW 6.0L GM Green Base Marine Engine

Indmar Part # 051022G
The Indmar 6.0L new Green base engine includes the following (when ordered under the above part number).

Block (with all internal engine components) Crank Pulley Water Circulating Pump Circ. Pump Pulley Stock Flywheel Fuel System (GM supplied only) Ignition System (coil near plug) Water Circlating Pump Dip Stick Tube Electronic Throttle Body
Displacement: Type: Comp. Ratio: Valve Config.: Valve Lifters: Bore x Stroke: Main Bearings Caps Fuel System: Fuel Type: Fuel Shutoff: Emmision Controls.: Firing Order: Horsepower: Torque: Warranty:

Valve Covers Spark Plugs Oil Pan Dip Stick

Specifications

364 C.I.D. (5967 CC) / 6.0L 6000 V-8 10.1:1 Overhead Valves (2 valves per cylinder) Hydralic Roller 101.60 x 92 mm Powder Metal Port Fuel Injection Regular Unleaded 5900 to 6000 RPM Positive Crankcase Vent./Returnless Fuel System 1 8 - 7 - 2 - 6 - 5 - 4 - 3 380 H.P. @ 5200 RPM 409 lb-ft @ 4200 RPM 1 Year Limited (90 Days Commercial)

Note: Actual power levels may vary depending on Quests calibration and application. The new Vortec 6000 Marine Engine is sold through Indmar exactly the way GM builds the engine for us. The 6.oL Green base engine features an electronic throttle body, coil near plug ignition, a cylinder head inspired by the LS6 Corvette engine and many more features that will make this the perfect direct replacement for any boater! (Note: The LQ-9/6.0L uses a MEFI 5 ECM)

www.barrmarine.net Toll Free: 866-255-9265

24

NEW 7.4L GM (H.O./390 H.P)Long Block Marine Engine

Indmar Part # 051014N
The Indmar 7.4L new Long Block engine includes the following (when ordered under the above part number).

Block (with all internal engine components) Harmonic Balancer Valve Covers Timing Chain Cover Oil Pan

Displacement: Cylinders: Comp. Ratio: Valve Config.: Valve Lifters: Ignition: Intake Manifold: Block MFG.: Flywheel Dia.: Firing Order: Oil Pan Capacity: Oil Type: Warranty:

Specifications

454 C.I.D. / 7.4L 90 Degree V8 Cylinder 8.6:1 Overhead Valves (2 valves per cylinder) Hydralic Roller Customer Supplied Customer Supplied GM Powertrain Customer Supplied 1-8-4-3-6-5-7-2 8 Quarts (With Filter) SAE 15W40 Pennzoil Marine 1 Year Limited (90 Days Commercial)

Note: Actual power levels may vary depending on Indmars calibration and application.

The Quest Long Block engine is brand new and the perfect engine for the boater who requires a new power plant in their boat. This engine is and excellent replacement for customer who has existing components they want to re-install to get their boat back in the water!

www.barrmarine.net Toll Free: 866-255-9265

25

REMANUFACTURED 8.1L GM EFI Base Marine Engine

Indmar Part # 051017-1000 Engine Includes:
The Indmar 8.1L remanufactured Long Block indludes the following.

Intake manifold Fuel Rail and Fuel Injectors Harmonic Balancer Water Circulating Pump Block (with all internal engines components)

Ignition Coils Oil Pan

Flywheel

The Remanufactured engines by Indmar are built only with premium components to insure many years of boating! These super high quality engines have everything factory installed to make sure your customers complete engine replacement is a smooth transaction! Please give the folks at Barr Marine By EDM or one of our very fine engine distributors a call and we will be glad to help you get started breathing life back into your boat!

8.1L Bobtail Pictured

The 8.1L can only be built for an inboard application (no I/Os).

Note: 3 inch spacer blocks must be used when installing the MerCruiser center rise exhaust (spacer # MC 20 93320A3 (spacers will be sold at an additional cost to the package).

Available Options:

-Closed Cooling (Half System only)

www.barrmarine.net Toll Free: 866-255-9265

26

NEW LS3 6.2L V8 Marine Engine

Indmar Part # 417738
The Indmar LS3 6.2L V8 engine includes the following (when ordered under the above part number). High-flow cylinder head Hollow Steel Camshaft Returnless Fuel Injection Cast Iron Crankshaft Cast Aluminum Block Intake Manifold Exhaust Manifold Extended Life Spark Plugs Oil Level Sensor Metric Fasteners Stainless Steel Fuel Rail Forged Powder Metal Connecting Rods Raised Rail Rocker Arm Covers Powder Metal Main Bearing Caps
Type: Displacement: Compression Ratio: Valve Configuration: Valve Lifters: Firing Order: Bore x Stroke: Fuel System: Fuel Type: Engine Orientation: Valves Per Cylinder: Bore Center (mm): Engine Mass: Emission Controls: Horsepower: Torque: Warranty:

Specifications

6.2L V-8 (Gen-IV Small Block) 6162 cc (376.0 ci) 10.7:1 Overhead Valves (2 valves per cylinder) Hydraulic Roller 1-8-7-2-6-5-4-3 103.25 x 92 mm Port Fuel Injection Premium Fuel recommended, not required Longitudinal 2 111.76 TBD Positive Crankcase Ventilation (PCV) 418 hp (312 kW) @ 5400 rpm 424 lb-ft (575 Nm) @ 4600 rpm 2 Year Limited (90 Days Commercial)

Note: Actual power levels may vary depending on Indmars calibration and application.
710 (27.95)
705 (27.75)

716 (28.19)

716 (28.19)

www.barrmarine.net Toll Free: 866-255-9265

27

NEW LSA 6.2L V8 SC Marine Engine

Indmar Part # 411174
The Indmar 6.2L LSA engine includes the following (when ordered under the above part number). High Flow Injectors Sumped Pistons 103.25mm Bore Block High-Flow Cylinder Heads Four Lobe Rotor Supercharger Stacked Plate Aluminum Oil Cooler Forged Steel Crankshaft Integrated Single Brick Charge Air Cooler
Displacement: Compression Ratio: Valve Configuration: Valve Lifters: Firing Order: Bore x Stroke: Fuel System: Fuel Type: Engine Orientation: Valves Per Cylinder: Bore Center (mm): Engine Mass: Horsepower: Torque: Warranty:

Piston Oil Spray Cooling Returnless Fuel Injection Stainless Steel Fuel Rail Rocker Arms

Specifications

6162 cc (376.0 ci) 9.1:1 Overhead Valves Hydraulic Roller 1-8-7-2-6-5-4-3 103.25 x 92 mm Sequential Fuel Injection Premium Fuel recommended, not required Longitudinal 2 111.76 467 lbs (212 kg) 530 hp (395 kW) @ 5400 rpm 545 lb-ft (739 Nm) @ 4000 rpm 2 Year Limited (90 Days Commercial)

Note: Actual power levels may vary depending on Indmars calibration and application.
740 (29.13) 675 (26.57)

766 (30.15)

766 (30.15)

www.barrmarine.net Toll Free: 866-255-9265

28

Indmar Engine Parts KITS

All replacement parts are from only the best manufacturers and are used on our production engines as well!

BA 45 1932 is used on the 4.3L Indmar Engine but may be used anywhere a 4 barrel spread bore to square bore carburetor conversion is needed!

Spread Bore to Square Bore Carburetor Adaptor

BA 45 1932

Fuel/Water Seperator Kit for 4.3L and 5.7L Carbureted Engines

BA 45 KIT is included on all Bobtail 4.3L and 5.7L Indmar I/O carbureted engine and a great option for any other 4.3L or 5.7L bobtail engine!

BA 45 KIT

500001 Fuel Pump Kit may be used on any 4.3L and 5.7L Enhanced Base or Bobtail. This kit is installed on all Enhansed Base and Bobtail 4.3L and 5.7L Indmar Carbureted Engines!

Electronic Fuel Pump Kit

500001

496007 F/P saftey switch kit may be used on any 4.3L and 5.7L Enhanced Base or Bobtail. This kit is installed on all Enhansed Base and Bobtail 4.3L and 5.7L Indmar Carbureted Engines!

Fuel Pump Safety Switch Kit

496007

www.barrmarine.net Toll Free: 866-255-9265

29

Indmar Engine Parts KITS (continued)

All replacement parts are from only the best manufacturers and are used on our production engines as well!

550002 is used on the 5.7L Indmar Engine and may be used anywhere an electronic ignition conversion is desired!

5.7L Complete Distributor Kit

550002

550003 is used on the 4.3L Indmar Engine and may be used anywhere an electronic ignition conversion is desired!

4.3L Complete Distributor Kit

550003

515003 KIT is used on the 4.3L and 5.7L Bobtail Engines and may be used anywhere an E-Z Oil Drain is needed! Note: This kit is used for Metric Thread oil pans only.

4.3L and 5.7L Bobtail E-Z Drain Oil Kit

515003 KIT

495121 is used on the 4.3L and 5.7L Bobtail Engines and may be used anywhere an Remote Oil Filter Kit is desired!

4.3L and 5.7L Remote Oil filter Kit

495121

www.barrmarine.net Toll Free: 866-255-9265

30

Indmar Engine Parts KITS

All replacement parts are from only the best manufacturers and are used on our production engines as well!

551600 KIT is used on the 5.7L Engines and may be used anywhere a steel oil pan replacement is needed! Note: This kit is used for one piece seal engines only!

Indmar 5.7L Steel Oil Pan Kit

551600

556000 KIT is used on the 5.7L Engines and may be used anywhere a valve cover replacement is needed! Note: This kit replaces the center bolt valve covers only!

Indmar 5.7L Valve Cover Kit

556000

This DIACOM Software Kit can be used on all engines with MEFI 1 thru MEFI 5 systems installed!

Indmar-Diacom Scan Tool MEFI 5 Kit

997422U (USB port) 997422S (serial port)

685000 KIT is used on the 4.3L, 5.7L and 8.1L Engines and may be used anywhere a valve cover replacement is needed!

Indmar Pick Up Pump Rebuild Kit

685000

www.barrmarine.net Toll Free: 866-255-9265

31

Barr Closed Cooling KITS (5.7L & 4.3L Half and Full Systems)
All replacement parts are from only the best manufacturers and are used on our production engines as well!

5.7L & 4.3L Closed Cooling Half System

Ths FWC Half kit may be installed on any 5.7L bobtail Indmar Engine (front mount only)

BA 37 0000

5.7L & 4.3L Closed Cooling Full System

Ths FWC Full kit may be installed on any 5.7L bobtail Indmar Engine (front mount only)

BA 37 0350

www.barrmarine.net Toll Free: 866-255-9265

32

Marine Transmissions

Part# 494009, 494010

Part# 494011, 494012, 494013

Part# 494001 ZF TRANSMISSION KIT-450A, 1:1 RATIO Part# 494002 ZF TRANSMISSION KIT-450A, 1.5:1 RATIO Part# 494003 ZF TRANSMISSION KIT-450A, 1:1 W/ WALTERS V-D Part# 494004 ZF TRANSMISSION KIT-450A, 1.26:1 RATIO Part# 494005 ZF TRANSMISSION KIT-630A, 1.5:1 RATIO Part# 494006 ZF TRANSMISSION KIT-630V W/ HURTH V-D Part# 494007 ZF TRANSMISSION KIT-630C, 1:1 W/ WALTERS V-D Part# 494008 ZF TRANSMISSION KIT-630C, 1:1 RATIO Part# 494009 ZF 45A 2.0:1 TRANSMISSION KIT Part# 494010 ZF 45A 2.43:1 TRANSMISSION KIT Part# 494011 ZF 63A 1.2:1 TRANSMISSION KIT Part# 494012 ZF 63A 2.0:1 TRANSMISSION KIT Part# 494013 ZF 63A 2.5:1 TRANSMISSION KIT Part# 085005 VELVET DRIVE-71C, 1:1 RATIO Part# 494101 MOUNTING KIT FOR VELVET DRIVE 71C TRANSMISSION www.barrmarine.net Toll Free: 866-255-9265

33

Its The Law - Know Your Rights!

Consumers are protected from manufacturers who attempt to unfairly chain the purchasers of their products to the continued purchase of their maintenance and repair products and authorized services. Congress has provided consumers with this protection under the MagnusonMoss Warranty Act as well as specific provisions of the Federal Trade Commission Improvement Act. Its against the law for an original equipment manufacturer to inform consumers that their warranty would be void should they use other than genuine replacement parts or if service were to be preformed by anyone other than an authorized OEM dealer unless, of course, such parts and service were to be performed Free of Charge under the terms of the warranty. The laws were enacted to grant the consumers and dealers the basic right to select replacement parts from competent manufacturers without fear of jeopardizing their warranty. The law directly provides the consumer the right of choice, the right to an affordable alternative choice of manufactured product. Of course, the original equipment manufacturer is not responsible for product failures or damages caused by product failures of product manufactured by others. Such damages become the responsibility of the company providing such products under the terms of their own warranties. Barr Marine by EDM originated the three-year limited warranty that has recently become the standard for all others to follow. Our warranty can be found in our catalog directly following this notice. Barr Marine by EDM has been a manufacturer of Marine Engine Parts for seventy-three years. The company has and continues to manufacture marine engine parts for many of the original equipment manufacturers. For years, we have represented the affordable alternative choice for your needs. We thank you for your continued support!

Barr Marine By EDM P.O. Box 190 100 Douglas Way Natural Bridge Station, VA. 24579 Ph. # 1-540-291-4180 Fax # 1-540-291-4185

34

BARR MARINE BY EDM 1 YEAR ENGINE WARRANTY

Long Blocks Pleasure Boat Applications 12 Months Parts and Labor* 24 Months Parts Commercial or Charter Boats 12 Months Parts & Labor Barr Marine expressly warrants that its engine is of good quality and free from defects in materials or workmanship. Purchaser acknowledges that Barr Marine has made no affirmation of fact or promise relating to its engines outside this Limited Warranty and Barr Marine has provided the purchaser no description, sample or model of its engine upon which the purchaser has relied in deciding to purchase a Barr Marine engine. Barr Marine will, at its sole discretion, replace defective parts or a complete engine. All repairs will be made at the sellers or distributors cost, plus applicable labor pursuant to the Labor Policy set forth below. PRIOR AUTHORIZATION IS REQUIRED FROM BARR MARINE BEFORE WARRANTY WORK IS BEGUN. Call Barr Marine at (866) 255-9265 for a numbered authorization. It is the sole responsibility of the ultimate purchaser/ owner to pay for such work and submit the alleged defective parts, written repair order showing all charges, and a written receipt for payment of all charges to Barr Marine for review and determination by Barr Marine that the engine failure is or is not covered by this Limited Warranty. Repairs or replacements do not extend this Limited Warranty. Transferable This Limited Warranty is transferable and is not limited to the ultimate purchase/owner at the time of the sale. Labor Policy Barr Marine will pay labor claims only to repair facilities it has authorized. Barr Marine will not be liable for or pay any labor claims on Barr Marine engines installed by a third party who is not a certified marine mechanic (Marine Certificate or equivalent). All labor expense for field repairs, removal or reinstallation shall be limited to that expense and to those hours listed in the most recent Motors Flat Rate Manual, or equivalent manual pre- approved by Barr Marine, at the prevailing labor rate for the area but not to exceed $40.00 per hour. In no event shall the total amount of labor cost exceed $350.00 for all boats 20 foot or shorter, $450.00 for cabin cruisers 21 foot or longer. A $100.00 crane allowance will be allowed on cabin cruisers 21 feet or longer in addition to the limitation on labor costs. OWNER OBLIGATIONS After 10 hours upon initial startup, ultimate purchase/owner shall assure that a certified licensed and qualified mechanic authorized by Barr Marine inspects your engine, which inspection should include, but is not limited to, adjustment of tappets (if applicable), adjustment of valves, timing and carburetor adjustments, tightening of gasket bolts (Barr Marine recommends retorquing gasket bolts regardless of gasket type), and a change of oil and oil filter. Carefully monitor oil levels for the first 100 hours as oil consumption may be higher during this period. Use good quality motor oil of the appropriate grade and viscosity as recommended by the original engine manufacturer. Barr Marine recommends against the use of synthetic oils or non-detergent oil, the use of which by the ultimate purchaser/owner shall void this Limited Warranty. Proper oil pressure and lubrication are mandatory for good engine break-in. All boats should be equipped with gauges or lights to indicate engine temperature and oil pressure. DO NOT OPERATE BOAT WITH ABNORMAL OIL PRESSURE OR WATER TEMPERATURE. After initial startup, avoid excessive RPM and keep boat on plane. Vary RPM range for first 3 to 5 hours running time. High engine RPM may damage your new engine through friction and high temperatures. Avoid long period of idling. Engine overheating and failure due to lack of lubrication can be prevented by adequate monitoring of all gauges or lights and should never in the absence of neglect by the purchaser result in engine damage.

35

Continued

Limitations & Exclusions ALL OTHER WARRANTIES EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES (INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY EXCLUDED AND NO WARRANTIES EXIST WHICH EXTEND BEYOND THE DESCRIPTION IN THE EXPRESS LIMITED WARRANTY ON THE FACE OF THIS DOCUMENT WITH REGARD TO ANY ENGINE OR PART PROVIDED BY BARR MARINE. NO ORAL STATMENTS BY ANY PERSON, DISTRIBUTOR OR SALESMAN MAY MODIFY OR CHANGE THIS LIMITED WARRANTY. NO TERM OF ANY PURCHASE ORDER OR OTHER FORM THE PURCHASER OR DISTRIBUTOR/SELLER SHALL MODIFY OR CHANGE THIS LIMITED WARRANTY. THIS LIMITED WARRANTY IS NOT AN UNCONDITIONAL WARRANTY AGAINST ALL HAZARDS OR FAILURES. BARR MARINE SHALL NOT BE RESPONSIBLE FOR: DAMAGE OR REPAIRS REQUIRED AS A CONSEQUENCE OF FAULTY INSTALLATIONMISAPPLICATION, ABUSE, IMPROPER SERVICING, UNAUTHORIZED ALTERATION OR IMPROPER OPERATION. PARTS NOT SUPPLIED BY BARR MARINE (INCLUDING BUT NOT LIMITED TO PAN, MANIFOLDS AND COVERS, WATER PUMPS, FUEL PUMPS, DISTRIBUTOR AND CARBURATOR OR FUEL INJECTION SYSTEMS), OR DAMAGES RESULTING FROM THE USE OF PARTS NOT SUPPLIED BY BARR MARINE. DAMAGES RESULTING FROM DETONATION OR PRE-IGNITION, INCLUDING BUT NOT LIMITED TO MELTED OR BROKEN PISTONS, BROKEN OR SCORED RINGS, DAMAGED CYLINDER HEADS OR GASKETS, SCORING ON CYLINDER WALLS OR PISTON HEADS. DAMAGES RESULTING FROM IMPROPER PRE-LUBRICATION PRIOR TO STARTUP. THE ULTIMATE PURCHASERS/OWNERS EXCLUSIVE REMEDY AGAINST BARR MARINE SHALL BE FOR THE REPLACEMENT OF THE ENGINE OR PAY, AT DISTRIBUTORS COST, THE COST OF MATERIALS USED FOR REPAIRS AS SET FORTH ABOVE. NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, ANY SPECIAL, DIRECT OR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, SUCH AS LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY, TOWING, OIL LUBRICATIONS, FILTERS, ANTIFREEZE, GASKETS, SHIPPING AND FREIGHT, LOSS OF USE OF VEHICLE OR LOSS OF TIME OR ANY OTHER INCIDENTIAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE TO THE ULTIMATE PURCHASER/OWNER. NO WARRANTY FROM INDMAR PRODUCTS CO., INC. INDMAR PRODUCTS CO., INC. GIVES NO WARRANTY, EXPRESS OR IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, PRODUCTIVENESS, OR ANY OTHER MATTER OF ANY GOODS WHICH ARE SUPPLIED BY BARR MARINE. INDMAR PRODUCTS CO., INC. SHALL BE IN NO WAY RESPONSIBLE FOR THEIR PROPER USE, IN SERVICE AND THE PURCHASER HEREBY WAIVES ALL RIGHTS OF REFUSAL AND RETURN OF GOODS. THE PURCHASER ACKNOWLEDGES THAT INDMAR PRODUCTS CO., INC HAS GIVEN NO WARRANTY AND THAT THE ONLY WARRANTY THAT PURCHASER SHALL HAVE SHALL BE SUCH WARRANTY, IF ANY, FROM BARR MARINE AS SET FORTH ABOVE AND THE PURCHASER SHALL LOOK SOLELY TO BARR MARINE. Governing Law & Venue The terms and provisions of the Limited Warranty, and each and every document related to this Limited Warranty, shall be governed by and construed according to the laws of the State of Virginia. Any action at law, suit in equity or judicial proceeding for the enforcement of the Limited Warranty or any provision thereof shall be instituted only in the courts of Virginia.

36

BARR MARINE BY EDM 2 YEAR ENGINE WARRANTY

1. Warranty. Pursuant to the terms and conditions and exclusions herein, Barr Marine by EDM, 100 Douglas Way, P.O. Box 190, Natural Bridge Station, Virginia 24579 (Barr Marine), warrants that its marine propulsion engine, factory installed accessories and the parts related thereto (collectively, Product) are free from material defects in material and workmanship under normal use and service during the applicable warranty period as set forth herein. 2. Coverage. Barr Marine shall replace or repair any defect in material or workmanship relating to the Product under the terms and conditions of this Limited Product Warranty. Components or parts of the Product that Barr Marine determines in its sole discretion to be wornout from use are specifically excluded from this Limited Product Warranty. If a Product or defective part thereof is, upon examination by Barr Marine, determined in sole opinion by Barr Marine to be defective, Barr Marine shall repair, or at its sole option, provide either a new or rebuilt replacement of equivalent quality. Barr Marine shall have the sole discretion to determine whether the replacement, if provided, shall be a new or rebuilt replacement. Barr Marines sole obligation under this Limited Product Warranty is limited only to the foregoing obligations and exclusions as stated herein. The Limited Product Warranty shall only be available to Customers who complete and properly fill out and deliver to Barr Marine an authorized Barr Marine Warranty Registration card within ten (10) days of purchase of the Product as set forth herein. 3. Customer. This Limited Product Warranty is extended only to the original retail purchaser of a boat in which a Product has been installed pursuant to Barr Marines approval or authority (Customer). If the boat is sold or traded prior to the end of the applicable warranty period set forth herein, the remainder of the applicable warranty period is transferable to the new owner (also referred herein as Customer) provided that all of the requirements for a valid transfer as set forth in this Limited Product Warranty are satisfied. No transfer of any rights by any Customer shall be deemed valid or effective unless and until approved in writing by Barr Marine. Warranties of any nature to any person other than those described herein are specifically excluded. 4. Excluded Items. In addition to, and without in any way limiting, any exclusion set forth elsewhere in this Limited Product Warranty, this Limited Product Warranty shall not apply to the following items: (a) (b) (c) (d) (e) (f) Shop supplies used in performing work pursuant to this Limited Product Warranty, including, but not limited to, rags, sealants and lubricants. Incidental, punitive and/or consequential damages, including, but not limited to, storage charges, attorney fees, telephone or rental charges of any type, inconvenience or loss of time or income. Minor adjustments and tune-ups, including, but not limited to, checking, cleaning or adjusting spark plugs, carburetor setting, filters, belts, controls and checking lubrication. Water pump impellers, water hoses, cooling system anodes, or any component determined solely by Barr Marine to be damaged from the failure of any of such items. Product failure as determined solely by Barr Marine to be caused by neglect, lack of maintenance, accident, abnormal operation, improper installation, improper preparation, improper winterization, improper dealer set-up, improper service or normal wear and tear. Haul-out, launch, and towing charges. Cost and expense incurred that relate to the removal and/or replacement of boat partitions or material due to boat design for necessary access to the Product. Transportation charges and travel time incurred by Barr Marine to fulfill any of its obligations pursuant to this Limited Product Warranty. Service or work to the Product as requested by the Customer that is as determined solely by Barr Marine to be beyond the scope of this Limited Product Warranty. Use of parts other than Barr Marine parts (or parts authorized by Barr Marine) and the use of labor other than Barr Marine labor (or labor authorized by Barr Marine) when making repairs or providing a replacement under this Limited Product Warranty. Oil, lubricants or fluids used for the normal maintenance of the Product. Defects to the Product as determined solely by Barr Marine to be caused by or due to participation in or preparing for racing or other competitive activity.

(g) (h) (i) (j) (k)

(l)

37

Continued

 (m) (n) (o) (p) (q) (r) (s)

Defects to the starter motor, armatures or field coil assembly of the Product as determined solely by Barr Marine to be caused by excessive cranking, condensation or submersion. Defects to the Product as determined solely by Barr Marine to be caused by water entering the Product via the itake or exhaust system or submersion. Defects to the Product as determined solely by Barr Marine to be caused by the use of fuels and lubricants that are not suitable for use with or on the Product or its fuel system components that was damaged or rendered inoperable from stale gasoline. Defects to the Product as determined solely by Barr Marine to be caused by the lack of cooling water resulting from the motor being started out of water or foreign materials blocking intake passages. Defects to the Product as determined solely by Barr Marine to be caused by servicing errors made by the Customer or by any servicing dealer/mechanic not approved or authorized by Barr Marine. Product warranty claims that Barr Marine in its sole opinion determines are not due or traceable to material de fects in material or workmanship of the Product; or Delivery fees, including but not limited to, air freight, next-day or second-day air, or any special delivery fee or ex pense unless authorized by Barr Marine prior to ordering of parts and prior to any work or service provided by Barr Marine pursuant to this warranty, including but not limited to its ordering of parts.

5. Inspection and Testing of Product. Certain parts of the Product may be tested upon receipt by Barr Marine. Such parts of the Product found to be free of defects in Barr Marines sole opinion will be returned to the Customer at Customers expense and no credit will be issued to the Customer. Barr Marine reserves the right to retrieve run time/run condition data from a Products Electric Control Module prior to granting any warranty coverage on the Product under this Limited Product Warranty. 6. Warranty Period. Warranty coverage shall be provided only for the periods of time hereinafter set forth for the Product: A period of twenty-four (24) months commencing from the date of purchase or the date of commencement of the Product use, whichever sooner occurs, in the case of non-commercial use; A period of three (3) months commencing from the date of purchase or the date of commencement of the Product use, whichever sooner occurs, in the case of commercial use.

(i) (ii)

In the event that more than one warranty time period may be applicable to a particular Product pursuant to this Section 6, the shorter period of time shall apply and shall be the only warranty time period allowed for that Product. The repair or replacement of parts or the performance of service under this Limited Product Warranty does not extend the applicable period of this warranty beyond its original expiration date as set forth herein. 7. Procedure. Within 10 days from the date of purchase by the original retail purchaser of the Product, the Customer shall complete and deliver the Barr Marine Warranty Registration Card to Barr Marine; or Indmar Products Co. If the Barr Marine Warranty Registration Card is not completed and delivered as set forth herein the Product will be excluded from all warranties set forth herein. In addition to other requirements set forth herein, no warranty claim will be honored without Barr Marines prior timely receipt of a completed Barr Marine Warranty Registration Card. In the case of a warranty transfer to a subsequent owner, the new owners information along with a check for $50.00 made payable to Barr Marine Warranty Transfer must be sent to Barr Marine within 10 days of the transfer. No transfer shall be effective or valid unless and until approved by Barr Marine in its sole discretion. For warranty claims to be asserted hereunder, the Product or defective part thereof, together with a written notice of itemized defects must be returned to the retailer from whom the Product was purchased or to any other convenient Barr Marine authorized dealer. To obtain the location of an authorized Barr Marine dealer or service center in your area, write to Barr Marine requesting such information or visit www.barrmarine.net. In the event that the local authorized Barr Marine dealer is unable to remedy a warranted defect in the Product, the Product or defective part thereof, together with a written notice of itemized defects, must be delivered to Barr Marine at 100 Douglas Way, P.O. Box 190, Natural Bridge Station, Virginia 24579 with any and all freight and insurance charges prepaid. All insurance and freight charges and return charges incurred by Barr Marine for delivery of the Product (or its new or rebuilt replacement) to the retail purchaser shall be paid by such purchaser. The Customer shall be solely responsible for any and all labor expenses related to the repair or replacement of a Product pursuant to this Limited Product Warranty that exceed the specified services rates of Barr Marine in effect at the date of purchase. A schedule of service rates of Barr Marine may be obtained from any authorized Barr Marine dealer.

Continued

38

8. Trade Accessories. Barr Marine makes no warranty of any character with respect to any and all trade accessories not manu factured by Barr Marine or not installed by Barr Marine or pursuant to Barr Marines written authority. 9. Voiding the Warranty. In addition to any requirement set forth in this Limited Product Warranty not being met or satisfied, this Limited Product Warranty shall become void and shall not apply under the following conditions or circumstances: (a) (b) When the Product or any part thereof is subject to accident, alternation, modifications, abuse, misuse, neglect or improper maintenance in Barr Marines sole determination; When the Product is serviced by any individual or entity not authorized or approved in writing by Barr Marine; or When damage to the Product results from cases not arising from defects in material and/or workmanship in Barr Marines sole determination.

(c)

10. Notices. Any notice to Barr Marine set forth pursuant to this Limited Product Warranty shall be delivered to the following address: Barr Marine by EDM 100 Douglas Way P.O. Box 190 Natural Bridge Station, VA 24579

11. Warranty Claims Made Outside the United States. In the event that Barr Marine fulfills a warranty claim outside the United States pursuant to this Limited Product Warranty, the Customer shall be solely responsible for any and all additional charges which Barr Marine may incur in order to fulfill its warranty obligations outside the United States. Barr Marine will not provide warranty coverage on any Product sold outside the United States unless the warranty work or service is performed by a marine technician certified by a major inboard or sterndrive marine engine manufacturer approved and authorized in writing by Barr Marine. 12. Limitation. THE WARRANTY STATED ABOVE IS A LIMITED WARRANTY AND IT IS THE ONLY WARRANTY MADE BY BARR MARINE. BARR MARINE DOES NOT MAKE ANY OTHER WARRANTIES EXPRESS OR IMPLIED. THERE ARE EXPRESSLY EXCLUDED ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. BARR MARINE SHALL HAVE NO LIABILITY WITH RESPECT TO ITS OBLIGATIONS UNDER THIS LIMITED WARRANTY OR OTHERWISE FOR CONSEQUENTIAL, EXEMPLARY, INCIDENTAL OR PUNITIVE DAMAGES EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE STATED EXPRESS LIMITED WARRANTY IS IN LIEU OF ALL LIABILITIES OR OBLIGATIONS OF BARR MARINE FOR DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE DEVELOPMENT, DELIVERY, USE OR PERFORMANCE OF THE PRODUCT. IN ANY EVENT, THE LIABILITY OF BARR MARINE FOR ANY REASON AND UPON ANY CAUSE OF ACTION WHATSOEVER SHALL BE LIMITED TO THE AMOUNT THEN PREVIOUSLY PAID FOR THE PRODUCT BY THE CUSTOMER. BARR MARINE DOES NOT AUTHORIZE ANY PERSON, EMPLOYEE, AGENT, REPRESENTATIVE OR ENTITY TO ALTER ANY OF THE TERMS AND CONDITIONS OF THIS LIMITED PRODUCT WARRANTY OR CREATE ANY OTHER OBLIGATION RELATING TO THE PRODUCT. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. NOTICE TO CALIFORNIA CUSTOMERS: CALIFORNIA CUSTOMERS MUST DIRECTLY NOTIFY BARR MARINE IN WRITING IF THE PRODUCT DOES NOT CONFORM TO APPLICABLE WARRANTIES AND (A) THE NON-CONFORMITY IS LIKELY TO CAUSE DEATH OR SERIOUS BODILY INJURY AND HAS BEEN SUBJECT TO REPAIR TWO (2) OR MORE TIMES, AND/OR (B) THE NON-CONFORMITY HAS BEEN SUBJECT TO REPAIR FOUR (4) OR MORE TIMES. CALIFORNIA CUSTOMERS ARE HEREBY NOTIFIED TO THE FOLLOWING PROVISIONS OF CALIFORNIA LAW: CAL. CIVIL CODE 1793.22 AND CAL. CIVIL CODE 1793.2(d). COMPLETE COPIES OF THESE CODE SECTIONS ARE AVAILABLE UPON REQUEST. Any/all litigation under this Warranty or arising out of the Product must be filed within the state of Virginia, County of Rockbridge.

39

Continued

NOTES