Servo Motors: Product Data

Servo Motors
Product Data
Unimotor HD, Unimotor FM,
NT Series and XV Series
0.9 - 648lb-in (0.1 - 73.2Nm)
230V / 460V
Contents
Unimotor FM 230V / 460V ..........................................................24
Key Features...........................................................................24
Order Information..................................................................25
55mm Frame Ratings.............................................................26
55mm Frame Dimensions......................................................27
75mm Frame Ratings.............................................................28
95mm Frame Ratings.............................................................30
115mm Frame Ratings...........................................................32
115mm Frame Dimensions....................................................33
142mm Frame Ratings...........................................................34
190mm Frame Ratings...........................................................36
Unimotor FM Motor Selection Considerations........................40
Introduction ..................................................................................2
Selecting the Right Motor for the Right Drive .............................5
Unimotor HD 230V / 460V ............................................................6
Key Features.............................................................................6
Order Information....................................................................7
55mm Frame Ratings and Dimensions.....................................8
67mm Frame Ratings and Dimensions.....................................9
89mm Frame Ratings and Dimensions...................................10
115mm Frame Ratings and Dimensions.................................11
Unimotor HD Selection Considerations..................................12
NT Motor 230V ............................................................................14
Key Features...........................................................................14
2-inch Frame Ratings and Dimensions....................................15
3-inch Frame Ratings and Dimensions....................................16
NT Motor Selection Considerations........................................18
Cables for Servo Motors .............................................................42

Cable Selection Unimotor HD, Unimotor FM, NT (-EOxS)....43
Cable Selection NT Motors to Drives...................................48
Cable Selection XV Motors to Drives...................................50
Unimotor FM Fan Kits.............................................................51
XV Motor 230V ............................................................................19

Key Features...........................................................................19
40mm Frame Ratings and Dimensions...................................20
60/80mm Frame Ratings and Dimensions..............................21
130mm Frame Ratings and Dimensions.................................22
XV Motor Selection Considerations........................................23
ENVIROMENTAL
MANAGEMENT
E215243
Certificate No. EMS 54446
ISO 14001
30610
ISO
003
QUALITY
MANAGEMENT
Certificate No. Q 05176
003
ISO 9001
www.controltechniques.com
A Servo Motor for Every Application

Reliability and Innovation
Performance Advantage
Control Techniques designs its products using a proven

development process that prioritizes innovation and reliability.
This process has resulted in Control Techniques marketleading reputation for performance and quality.
Unimotor HD
Control Techniques offers a wide range of reliable servo

motors designed to meet specific application requirements.
When matched to a Control Techniques Unidrive SP, Digitax ST
Epsilon EP or MDS Servo drive, the resulting drive/motor
combination provides an optimized system in terms of
ratings, performance, cost and ease of use.
Today, businesses of all sizes are searching for partners who
understand the unique demands of todays global economy.
Time and again they turn to Emerson Industrial Automation.
With our world-class brands, broad industry experience and
extensive global presence, Emerson Industrial Automation is
uniquely positioned to deliver cost-effective solutions for the
ever-changing industrial manufacturing market.
Compact low-inertia servo motor for high-dynamic applications
Voltage Rating: 230V/460V

Continuous Torque: 6.4 to 166lb-in (0.72 to 18.8Nm)
Multiple Feedback Choices: resolver, encoder and abs encoder
Frame Sizes: 55mm, 67mm, 89mm and 115mm
Ratings: IP65; UL, CE and RoHS compliant
NT Motor
Compact NEMA or metric flange motors
Voltage Rating: 230V

Frame Sizes: English (NEMA 23 or 34) or Metric (IEC-72-1)
Ratings: IP65; UL and CE compliant (RoHS options available)
XV Motor
Economical metric motors
Voltage Rating: 230V

Frame Sizes: 40mm, 60mm, 80mm and 130mm
Ratings: IP55 and IP65; UL, CE and RoHS compliant
Unimotor FM
Designed for flexible configuration for use in a wide range of
applications with a high inertia option
Voltage Rating: 230V/460V

Continuous Torque: 6.4 to 1204lb-in (0.72 to 136Nm)
with multiple connector options
Frame Sizes (with NEMA flange options): 55, 75, 95, 115,
142 and 190mm
Ratings: IP65; UL and CE compliant

Shaft seals are standard on Control Techniques Unimotor HD, NT
Series and Unimotor FM
The Unimotor HD series servo motor expands the
capabilities of Control Techniques motion systems with
its wide selection of speed, torque and options as well as
support for incremental encoders, absolute encoders and
resolver motor feedback.
A Wide Range of Rugged and Reliable Servo Motors

Servo Motor
Product Matrix
HD Motors
NT Motors
XV Motors
FM Motors
Page 6
Page 14
Page 19
Page 24
230 / 460
230
230
230 / 460
Up to 166lb-in (18.8Nm)
Up to 1200lb-in (136Nm)
Flange
IEC
IEC, NEMA
Metric
IEC , NEMA
Frame
55, 67, 89, 115mm
2, 3in
40, 60, 80, 130mm
55, 75, 95, 115, 142, 190mm
Inertia
Low
Low (high-inertia opt.)
Low, medium
Med. (high-inertia opt.)
Peak Torque
Base Speeds
Up to 6000rpm
Up to 5000rpm
Up to 5000rpm
Up to 6000rpm
Motor Family
Drive Voltage (Vac)
Continuous Stall Torque
Holding
Brake Options
Holding
Connector Options
Circular style frame mounted

90 and rotatable
MS or circular style frame

mounted, MS style on 40in
lead, flying leads, drive connector terminated leads (20ft
max.)
Feedback Options
Incremental encoders, optical

SinCos single- and multi-turn,
inductive SinCos single and
multi turn, resolver, Hiperface
(SICK) and EnDAT
Ingress Protection
AMP Mat-n-Loc on 1ft. lead

(40 to 80mm); MS style
frame-mounted (130mm)
Circular style frame-mounted

90 and rotatable; optional
90 fixed, vertical, or mixed
Incremental
2048 line count,
inductive absolute,
resolver
Incremental
2048 line count
Incremental encoders, optical SinCos single- and multiturn, inductive SinCos single
and multi-turn, resolver,
Hiperface (SICK) and EnDAT
IP65
IP65, IP67, IP68
IP55, IP65
IP65
Approvals
CE, UL, RoHS
CE, UL (RoHS opt.)
CE, UL, RoHS
CE, UL, RoHS
Shaft Seals
Why Motion Customers Choose Control Techniques Motion Control Solutions...

A full line of servo motors from 1lb-in to 1200lb-in
Single-source motion control lowers total system costs
Affordable, highly reliable motors and controls
FREE software offers the ultimate programming capability
and greatly reduces programming time
No-footprint I/O and multiple fieldbus options including
EtherCAT, EtherNet I/P, Modbus TCP/IP and more
High-speed, peer-to-peer communications
14 feedback types supported as standard
Integrated programs eliminate need for PLC
Drive and Application Center support
Zero-space EMI and dynamic braking options
AC drives with closed-loop vector control
4
Selecting the Right Motor for the Right Drive

Control Techniques drive-and-motor combinations provide
an optimized system in terms of ratings, performance,
cost and ease of use. Use Control Techniques FREE CTSize
software (for Control Techniques Epsilon and MDS Servo
drives) or CTSelect (for Control Techniques Unidrive SP and
Digitax ST drives) to select system components or manually
select the system using the following steps.
1. Determine the applications continuous and peak torque
requirements at various motor shaft speeds, then refer
to motor data tables and the visual-reference overview
to help determine which motor family will be most
appropriate for the application.
2. Once the motor family is selected, use this brochure to
select a specific motor model that delivers the required
torque and speed. Make note of the continuous and peak
current (Amps) requirements of the selected motor.
3. Check the specification tables in Control Techniques
brochures for Digitax ST (BRO-DST-1107), Epsilon EP
(BRO-EPP-1107) or Unidrive SP (BRO-USPSRVO-1107)
Servo drives to select the drive model that delivers
adequate continuous and peak torque for the selected
motor.
4. Go to the table of contents of this brochure to select the
motor power and feedback cables for the selected motor
and drive. Confirm that the ratio of rotor inertia to load
inertia is <10:
Example (using Control Techniques NT Motor family and

Digitax ST Servo drive family):
Step 1: The application requires 12lb-in continuous torque.
NT Torque Range
Frame
Size
NT-207
7.5
.
NT-212
22.5
18
12.5
NT-320
37.5
20
56
59
6
10
Continuous Stall (lb-in)
100
Peak (lb-in)
Step 2: T
he Control Techniques Servo Motors brochure lists
the NT-212 motor with 2.7A stall current.
Motor Frame Size
2in
Voltage
230Vrms
Model
NT-207
NT-212
Continuous Stall Torque (lb-in)
7.5
12.5
Continuous Stall Torque (Nm)
0.85
1.4
Standard Inertia (lb-in-sec2)
0.000094
0.000164
Standard Inertia (kgm2)
0.0000106
0.0000185
Peak Torque (lb-in)
22.5
37.5
Peak Torque (Nm)
2.54
4.24
Maximum Cogging (lb-in)
0.094
0.12
Maximum Cogging (Nm)
0.011
0.014
Motor Weight (lbs)
Motor Weight (kg)
1.36
1.81
Rated Speed 5000 rpm Kt (Nm/A) =
5.12
5.08
Kt (Nm/A) =
0.58
0.57
load inertia/rotor inertia <10
Ke (V/krpm) =
Note: A gear reducer will reduce the load inertia based on

the following equation:
Reflected load inertia = load inertia/gear ratio2
Note: When specifying a motor system, be sure to consider
such options as user-interfaces (HMI), braking resistors and
other options and accessories that will enhance the systems
performance and value.
Electronic Nameplates
Some motors fitted with high-resolution SinCos or absolute
encoders are pre-loaded with the motor electronic
nameplate data during the manufacturing process. This
data can be read by Control Techniques Servo drives and
used to automatically optimize the drive settings. This
feature simplifies commissioning and maintenance, ensures
consistent performance and saves time.
For comprehensive Control Techniques motor drive information, refer to
the following brochures:
Unidrive SP (BRO-USP-1107), Unidrive SP Servo ( BRO-USPSRVO-1107),
Digitax ST (BRO-DST-1107), Epsilon EP (BRO-EEP-1107)
35
34.7
Rated Torque (lb-in)
7.50
12.50
Rated Torque (Nm)
0.85
1.4
Stall Current (A)
1.7
2.7
Rated Power (kW)
0.432
0.740
R (ph-ph) ()
11.1
4.56
L (ph-ph) (mH)
39.1
18.9
Step 3: S
elect the Digitax ST drive with adequate
current rating.
Ratings Digitax ST
Output Current*
Drive Model
Number
Voltage /
Cont. A
Peak A
DST1201
200-230 3
1.7
5.1
DST1202
200-230 3
3.8
11.4
DST1203
200-230 3
5.4
16.2
DST1204
200-230 3
7.6
22.8
DST1401
380-480 3
1.5
4.5
Drive switching frequency at 6kHz for rated performance

*Peak current is duty cycle limited
**Derate continuous current above 6kHz drive switching
frequency
Unimotor HD 230V / 460V

Compact, Powerful High-Dynamic AC Servo Motors
Designed for maximum torque density, the Unimotor HD
brushless AC Servo motor series provides an exceptionally
compact, low-inertia solution for applications that require
very high torque during rapid acceleration and deceleration
profiles. Unimotor HD motors fitted with high-resolution
SinCos or absolute encoders are pre-loaded with the motor
electronic nameplate data during the manufacturing
process. This data can be read by Control Techniques Servo
drives and used to automatically optimize the drive settings.
This feature simplifies commissioning and maintenance,
ensures consistent performance and saves time.
Unimotor
The Unimotor HD torque profile is closely matched to

Digitax ST Servo drives providing up to 300% peak overload
for maximum dynamic performance.
Key Features
Torque range: 6.4 to 166lb-in (0.72 to 18.8Nm)
High torque-to-inertia ratio for high-dynamic performance
Compact and powerful
Optional holding brake
IP65 conformance
Segmented stator design
World class performance
Winding to suit 230V and 460V
Speeds include 2000, 3000, 4000 and 6000rpm
Large shafts to increase torsional rigidity
Multiple feedback options:
Incremental encoder: high accuracy, medium resolution
Inductive absolute: medium accuracy, medium
resolution, single-turn and multi-turn
Optical SinCos/absolute: high accuracy, high resolution,
single-turn and multi-turn
Hiperface (SICK) and EnDAT (Heidenhain) protocols
supported
Resolver: robust for extreme applications and
conditions; lower accuracy, medium resolution
Unimotor HD motors (shown with a Control Techniques

Digitax ST Servo drive).
Frame
Size
15
55
67
95
98
71
115
212
166
1
QUALITY
MANAGEMENT
003
ISO 9001
FM30610
58
33
Approvals
Unimotor HD Torque Range
499
10
Continuous (lb-in)
100
Peak (lb-in)
Unimotor HD 230V / 460V Order Information

Use the information below to create an order code for a Unimotor HD (top row is an example).
089
UD
Frame
Size
Motor
Voltage
055
ED = 230V
067
UD = 460V
089
30
Stator
Length
Speed
Brake (24V)
055 - 089
055-067 Frame
Frame
055 Frame
Connection
Type
Output
Shaft
30 = 3000 rpm 0 = Not Fitted (Std) B = Power and

Signal 90
60 = 6000 rpm 1 = Holding Brake Rotatable
089 Frame
067115 Frames
40 = 4000 rpm
60 = 6000 rpm
115 Frame
Feedback Device
Inertia
055-067 Frames
A = Keyed* AR = Resolver
115 Frame 30 = 3000 rpm 0 = Not Fitted (Std)
115
CA
A = Standard
CR = Incremental Encoder (Renco) ** 4096 ppr (R35i)

EM = Inductive SinCos Multi-Turn
EQI 1130 - EnDat 2.1
FM = Inductive SinCos Single-Turn
ECI 1118 - EnDat 2.1
5 = Holding Brake
089-115 Frames
AE = Resolver
CA = Incremental Encoder (SICK) **
4096 ppr (CFS50)
20 = 2000 rpm
EB = Optical SinCos Multi-Turn
EQN 1325 - EnDat 2.2
30 = 3000 rpm
FB = Optical SinCos Single-Turn
ECN 1313 - EnDat 2.2
EC = Inductive SinCos Multi-Turn***
EQI 1331 - EnDat 2.1
FC = Inductive SinCos Single-Turn
ECI 1319 - EnDat 2.1
RA = Optical SinCos Multi-Turn***
SRM 50 (GEN 2)
- Hiperface
SA = Optical SinCos Single-Turn
SRS 50 (GEN 2)
- Hiperface
NOTES:
*Half key provided to create a smooth shaft
**Stocked motor, standard feedback
***Limited quantities, normally stocked
Stocked Motors
Unbraked Motors
Stall Torque
(lb-in)
(Nm)
Speed
rpm
230V
Order Code
Stall Current
(A)
460V
Order Code
Stall Current
(A)
12.8
1.45
6000
067EDA600BACRA
3.12
067UDA600BACRA
1.81
22.5
2.55
3000
067EDB300BACRA
2.74
067UDB300BACRA
1.59
22.5
2.55
6000
067EDB600BACRA
5.48
067UDB600BACRA
3.19
48.7
5.50
3000
089EDB300BACAA
5.91
089UDB300BACAA
3.44
48.7
5.50
4000
089EDB400BACAA
7.86
089UDB400BACAA
4.58
70.8
8.00
3000
089EDC300BACAA
8.6
089UDC300BACAA
5.0
70.8
8.00
4000
089EDC400BACAA
11.43
089UDC400BACAA
6.67
90.3
10.2
3000
115EDB300BACAA
10.97
115UDB300BACAA
6.38
129
14.6
3000
115EDC300BACAA
15.7
115UDC300BACAA
9.13
166
18.8
3000
115UDD300BACAA
11.75
460V
Order Code
Stall Current
(A)
1.59
All Unimotor HD motors feature

connections that rotate for
easier cable routing and
installation.
Braked Motors
Stall Torque
(lb-in)
(Nm)
Speed
rpm
230V
Order Code
Stall Current
(A)
22.5
2.55
70.8
8.0
3000
067EDB305BACRA
2.74
067UDB305BACRA
3000
089EDC305BACAA
8.6
089UDC305BACAA
129
14.6
5.0
3000
115EDC305BACAA
15.7
115UDC305BACAA
9.13
NOTE:
Stocked motors cover the range of HD motors and are available with short lead times for low quantities;
consult factory for lead times for high-volume orders or on select feedback options
Unimotor HD 55mm Frame Ratings and Dimensions

Voltage (Vrms)
Frame Length
055ED
055UD
200-240
380-480
6.37
10.44
14.6
6.37
10.44
14.6
0.72
1.18
1.65
0.72
1.18
1.65
Peak Torque (lb-in)
25.49
41.78
58.42
25.49
41.78
58.42
Peak Torque (Nm)
2.88
4.72
6.6
2.88
4.72
6.6
0.00012
0.00022
0.00032
Inertia (lb-in-sec2) 0.00012 0.00022 0.00032
4 holes R (H14)
equispaced on a
mounting BCD S
P
Motor Frame Size (mm)
Inertia (kgm2) 0.000014 0.000025 0.000036 0.000014 0.000025 0.000036

Motor Weight (lb)
2.64
3.3
3.96
2.64
3.3
3.96
Motor Weight (kg)
1.2
1.5
1.8
1.2
1.5
1.8
Speed 3000 rpm Kt (lb-in/A) =
6.55
7.7
8.05
6.55
13.19
14.6
Kt (Nm/A) =
0.74
0.87
0.91
0.74
1.49
1.65
Ke (V/krpm) =
45
52.5
55
45
90
100
6.2
9.29
13.1
6.2
9.29
13.1
Rated Torque (Nm)
0.7
1.05
1.48
0.7
1.05
1.48
Stall Current (A)
0.97
1.36
1.81
0.97
0.79
Rated Power (hp)
0.29
0.44
0.62
0.29
0.44
0.62
Rated Power (kW)
0.22
0.33
0.46
0.22
0.33
0.46
R (ph-ph) ()
28.00
14.12
9.53
28.00
45.00
31.00
M E
Optional
key
L
G
L (ph-ph) (mH)
50.00
32.00
23.00
50.00
100.00
75.00
3.98
3.81
4.25
6.55
6.99
7.35
Kt (Nm/A) =
0.45
0.43
0.48
0.74
0.79
0.83
27
26
29
45
47.5
50
6.02
7.97
10.62
6.02
7.97
10.62
Rated Torque (Nm)
0.68
0.9
1.2
0.68
0.9
1.2
Motor Dimensions
Stall Current (A)
1.61
2.74
3.44
0.97
1.49
1.99
Rated Power (hp)
0.58
0.76
1.01
0.58
0.76
1.01
Rated Power (kW)
0.43
0.57
0.75
0.43
0.57
0.75
R (ph-ph) ()
8.50
3.55
2.38
28.00
10.70
7.80
L (ph-ph) (mH)
16.00
8.20
6.30
50.00
25.00
20.00
Ke (V/krpm) =
Feedback AR,
CR, EM, FM
Number of Poles
H
A
Frame Length
A
Unbraked
Length
Braked Length
(in)
(mm)
(in)
(mm)
(in)
(mm)
4.65
118
5.59
142
6.54
166
3.55
90
4.49
114
5.43
138
6.22
158
7.17
182
8.11
206
5.12
130
6.06
154
7.01
178
(in)
NOTES:
t= 212 F (100C) winding 104 F (40C) maximum
ambient; all data subject to +/-10% tolerance
Stall torque, rated torque and power relate to maximum
continuous operation tested in a 68 F (20 C) ambient
above 12kHz drive switching frequency
Maximum intermittent winding temperature is 284 F
(140 C)
(mm)
Flange Thickness
0.28
7.0
Register Length
0.1
2.5
Register Diameter
1.58
40.0
Overall Height
3.9
99.0
Flange Square
2.17
55.0
Mounting Hole Dia.
0.23
5.8
Mounting Hole BCD
2.48
63.0
Motor Housing
2.17
Mounting Bolts
55.0
M5
Shaft Dimensions
Tapped hole
thread size
I to depth J
(in)
(mm)
Shaft Diameter
0.55
14.0
Shaft Length
1.18
30.0
Key Height
0.63
16.0
Key Length
0.98
25.0
Key-to-Shaft End
0.06
1.5
Key Width
0.2
Tapped Hole Thread Size
Tapped Hole Depth
5.0
M5 x 0.8
0.49
12.5

Voltage (Vrms)
Frame Length
067ED
067UD
200-240
380-480
12.8
22.6
32.7
12.8
22.5
32.7
1.45
2.55
3.70
1.45
2.55
3.70
Peak Torque (lb-in)
38.5
67.7
98.2
38.5
67.7
98.2
Peak Torque (Nm)
4.35
7.65
11.10
4.35
7.65
11.10
Inertia (lb-in-sec ) 0.00027

2
0.00047 0.00066
0.00027 0.00047
4 holes R (H14)
equispaced on a
mounting BCD S
0.00066
Motor Weight (lb)
4.40
5.72
7.04
4.41
5.73
7.05
Motor Weight (kg)
2.00
2.60
3.20
2.00
2.60
3.20
10
10
10
10
10
10
8.23
8.23
8.23
7.08
14.16
14.16
Kt (Nm/A) =
0.93
0.93
0.93
0.80
1.60
1.60
Ke (V/krpm) =
57.0
57.0
57.0
49.0
98.0
98.0
12.4
21.7
31.0
12.4
21.7
31.0
Rated Torque (Nm)
1.40
2.45
3.50
1.40
2.45
3.50
Stall Current (A)
1.56
2.74
3.98
1.81
1.59
2.31
Number of Poles
Rated Power (hp)
0.59
1.03
1.48
0.59
1.03
1.48
Rated Power (kW)
0.44
0.77
1.10
0.44
0.77
1.10
R (ph-ph) ()
14.92
4.88
3.33
11.69
15.20
10.70
12.70
45.43
17.40
35.18
54.20
40.80
4.16
4.16
7.08
7.08
7.08
Kt (Nm/A) =
0.47
0.47
0.80
0.80
0.80
D
F
G
C
H
K
L
Optional
key
M
Ke (V/krpm) =
28.5
28.5
49.0
49.0
49.0
11.5
19.5
11.5
19.5
27.4
Rated Torque (Nm)
1.30
2.20
1.30
2.20
3.10
Motor Dimensions
Stall Current (A)
3.12
5.48
1.81
3.19
4.63
Feedback AR,
CR, EM, FM
L (ph-ph) (mH)
Rated Power (hp)
1.10
1.85
Rated Power (kW)
0.82
R (ph-ph) ()
3.86
L (ph-ph) (mH)
11.06
NOTES:
t= 212 F (100 C) winding 104 F (40 C)
maximum ambient; all data subject to +/10% tolerance
Stall torque, rated torque and power relate
to maximum continuous operation tested
in a 68 F (20 C) ambient above 12kHz drive
switching frequency
Maximum intermittent winding temperature
is 284 F (140 C)
1.10
1.85
2.61
1.38
0.82
1.38
1.95
1.22
11.69
3.79
2.68
4.35
35.18
13.60
10.20
Tapped hole
thread size
I to depth J
Inertia (kgm2) 0.000030 0.000053 0.000075 0.000030 0.000053 0.000075
Frame Length
A
Unbraked Length
Braked Length
(in) (mm)
(in)
(mm)
(in) (mm)
5.62 142.7
6.80
172.7 7.98 202.7
4.28 108.8
5.46
138.8 6.65 168.8
7.00 177.7
8.18
207.7 9.37 237.7
5.66 143.8
6.84
173.8 8.02 203.8
(in)
(mm)
7.5
Flange Thickness
0.30
Register Length
0.10
2.5
Register Diameter
2.36
60.0
Overall Height
4.39
111.5
Flange Square
2.76
70.0
Mounting Hole Dia.
0.23
5.8
Mounting Hole BCD
2.95
75.0
Motor Housing
2.64
Mounting Bolts
67.0
M5
Shaft Dimensions
(in)
(mm)
Shaft Diameter
0.55
14.0
Shaft Length
1.18
30.0
Key Height
0.63
16.0
Key Length
0.87
22.0
Key-to-Shaft End
0.14
3.6
Key Width
0.20
Tapped Hole Depth
5.0
M5 x 0.8
0.53
13.5
Voltage (Vrms)
089ED
089UD
200-240
380-480
28.3
48.7
70.8
28.3
48.7
70.8
3.20
5.50
8.00
3.20
5.50
8.00
Peak Torque (lb-in)
85.0
146.0
212.4
85.0
146.0
212.4
Frame Length
Peak Torque (Nm)
9.60
16.50
24.00
9.60
16.50
24.00
Inertia (lb-in-sec2)
0.00077
0.00142
0.00207
0.00077
0.00142
0.00207
4 holes R (H14)
equispaced on a
mounting BCD S
Inertia (kgm2) 0.000087 0.000161 0.000234 0.000087 0.000161 0.000234

6.8
9.2
11.7
6.8
9.2
11.7
Motor Weight (kg)
3.30
4.40
5.50
3.30
4.40
5.50
10
10
10
10
10
10
Number of Poles
8.2
8.2
14.2
14.2
14.2
Kt (Nm/A) =
0.93
0.93
1.60
1.60
1.60
Ke (V/krpm) =
57.0
57.0
98.0
98.0
98.0
42.9
61.1
26.6
42.9
61.1
Rated Torque (Nm)
4.85
6.90
3.00
4.85
6.90
Stall Current (A)
5.91
8.60
2.00
3.44
5.00
Rated Power (hp)
2.04
2.91
1.26
2.04
2.91
Rated Power (kW)
1.52
2.17
0.94
1.52
2.17
R (ph-ph) ()
1.57
0.89
10.10
5.05
2.68
L (ph-ph) (mH)
11.84
7.09
65.17
38.36
21.72
6.2
6.2
6.2
10.6
10.6
10.6
Kt (Nm/A) =
0.70
0.70
0.70
1.20
1.20
1.20
Ke (V/krpm) =
42.8
42.8
42.8
73.5
73.5
73.5
25.7
40.3
56.2
25.7
40.3
56.2
Rated Torque (Nm)
2.90
4.55
6.35
2.90
4.55
6.35
Stall Current (A)
4.57
7.86
11.43
2.67
4.58
6.67
Rated Power (hp)
1.62
2.56
3.57
1.62
2.56
3.57
Rated Power (kW)
1.21
1.91
2.66
1.21
1.91
2.66
R (ph-ph) ()
2.04
0.79
0.54
6.16
2.47
1.75
L (ph-ph) (mH)
13.20
5.97
4.38
39.78
18.80
14.03
4.2
4.2
4.2
7.1
7.1
7.1
Kt (Nm/A) =
0.47
0.47
0.47
0.80
0.80
0.80
Ke (V/krpm) =
28.5
28.5
28.5
49.0
49.0
49.0
23.5
33.6
44.3
23.5
33.6
44.3
Rated Torque (Nm)
2.65
3.80
5.00
2.65
3.80
5.00
Stall Current (A)
6.88
11.83
17.20
4.00
6.88
10.00
Rated Power (hp)
2.24
3.21
4.21
2.24
3.21
4.21
Rated Power (kW)
1.67
2.39
3.14
1.67
2.39
3.14
R (ph-ph) ()
0.98
0.39
0.23
2.52
1.27
0.83
L (ph-ph) (mH)
6.24
2.96
1.89
16.29
9.59
6.66
NOTES:
t= 212 F (100 C) winding 104 F (40 C) maximum ambient; all data subject to
+/-10% tolerance
Stall torque, rated torque and power relate to maximum continuous operation
tested in a 68 F (20 C) ambient above 12kHz drive switching frequency
Maximum intermittent winding temperature is 284 F (140 C)
F
G
C
H
K
L
Optional
key
M
10
A*
Frame Length
A
Motor Dimensions
Unbraked Length
Braked Length
(in) (mm)
(in)
(mm)
C
(in)
4.35 110.5 5.53 140.5 6.71 170.5
A* 7.40 187.9 8.58 217.9 9.76 247.9

B
5.93 150.6 7.11 180.6 8.29 210.6

(in)
(mm)
Flange Thickness
0.41
10.3
Register Length
0.09
2.2
Register Diameter
3.15
80.0
Overall Height
5.14
130.5
Flange Square
3.58
91.0
Mounting Hole Dia.
0.28
7.0
Mounting Hole BCD
3.94
100.0
Motor Housing
3.50
89.0
M6
(in)
(mm)
Shaft Diameter
0.75
19.0
Shaft Length
1.57
40.0
Key Height
0.85
21.5
Shaft Dimensions
Key Length
1.26
32.0
Key-to-Shaft End
0.15
3.7
Key Width
0.24
Tapped Hole Depth
(mm)
A* 5.82 147.8 7.00 177.8 8.16 207.8
Mounting Bolts
*Motor length
increases 0.472in
(12mm) for feedback
options FB, EB, CA,
SA and RA; motor
length decreases
0.394in (10mm) for
feedback option AE
Feedback EC
and FC only*
Motor Weight (lb)
Tapped hole
thread size
I to depth J
6.0
M6 x 1.0
0.67
17.0

Voltage (Vrms)
Frame Length
115ED
115UD
200-240
380-480
90.3
129.2
166.4
90.3
129.2
166.4
10.20
14.60
18.80
10.20
14.60
18.80
Peak Torque (lb-in)
270.8
387.6
499.1
270.8
387.6
499.1
Peak Torque (Nm)
30.60
43.80
56.40
30.60
43.80
56.40
Inertia (lb-in-sec2)
0.00390
0.00566
0.00742
0.00391
0.00566
0.00742
4 holes R (H14)
equispaced on a
mounting BCD S
Tapped hole
thread size
I to depth J
Inertia (kgm2) 0.000441 0.000639 0.000838 0.000441 0.000639 0.000838

15.87
19.62
23.6
15.87
19.62
23.6
Motor Weight (kg)
7.20
8.90
10.70
7.20
8.90
10.70
10
10
10
10
10
10
Number of Poles
12.4
12.4
12.4
21.2
21.2
21.2
Kt (Nm/A) =
1.40
1.40
1.40
2.40
2.40
2.40
Ke (V/krpm) =
85.5
85.5
85.5
147.0
147.0
147.0
76.1
105.3
138.1
76.1
105.3
138.1
Rated Torque (Nm)
8.60
11.90
15.60
8.60
11.90
15.60
Stall Current (A)
7.29
10.43
13.43
4.25
6.08
7.83
Rated Power (hp)
2.41
3.34
4.39
2.41
3.34
4.38
Rated Power (kW)
1.80
2.49
3.27
1.80
2.49
3.27
R (ph-ph) ()
1.40
0.77
0.61
4.41
2.41
1.80
L (ph-ph) (mH)
6.62
12.84
7.87
40.59
24.69
19.45
8.2
8.2
14.2
14.2
14.2
Kt (Nm/A) =
0.93
0.93
1.60
1.60
1.60
Ke (V/krpm) =
57.0
57.0
98.0
98.0
98.0
68.2
92.9
68.2
92.9
120.4
Rated Torque (Nm)
7.70
10.50
7.70
10.50
13.60
Stall Current (A)
10.97
15.70
6.38
9.13
11.75
Rated Power (hp)
3.25
4.43
3.25
4.43
5.73
Rated Power (kW)
2.42
3.30
2.42
3.30
4.27
R (ph-ph) ()
0.58
0.39
1.83
1.21
0.78
L (ph-ph) (mH)
5.40
4.01
16.93
12.72
8.65
NOTES:
t= 212 F (100 C) winding 104 F (40 C) maximum ambient; all data subject to
+/-10% tolerance
Stall torque, rated torque and power relate to maximum continuous operation
tested in a 68 F (20 C) ambient above 12kHz drive switching frequency
T
B
D
F
G
C
H
K
L
Optional key
N
M E
A*
Frame Length
B
Motor Dimensions
Feedback EC
and FC only*
Motor Weight (lb)
Unbraked Length
Braked Length
C
(mm)
(in)
(mm)
(in)
A*
7.63
193.8
8.81
223.8
9.99
253.8
6.06
154.0
7.24
184.0
8.43
214.0
A*
9.09
230.9
10.27
260.9
11.45
290.9
7. 52
191.1
8.70
221.1
9.89
251.1
(in)
(mm)
Flange Thickness
0.52
13.2
Register Length
0.11
2.7
Register Diameter
4.33
110.0
Overall Height
6.16
156.5
Flange Square
4.57
116.0
Mounting Hole Dia.
0.39
10.0
Mounting Hole BCD
5.12
130.0
Motor Housing
4.53
Mounting Bolts
increases 0.472in
(12mm) for feedback
options FB, EB, CA,
SA and RA; motor
length decreases
0.394in (10mm) for
feedback option AE
115.0
(in)
(mm)
Shaft Diameter
0.94
24.0
Shaft Length
1.97
50.0
Key Height
1.06
27.0
Key Length
1.57
40.0
Key-to-Shaft End
0.21
5.3
Key Width
0.31
Tapped Hole Depth
(mm)
M8
Shaft Dimensions
*Motor length
(in)
8.0
M8 x 1.25
0.79
20.0
11
Unimotor HD Selection Considerations

Feedback Options
Feedback Device
Order Code
Feedback Type
Encoder
Supply Voltage
SinCos Cycles or
Incremental
Pulses per
Revolution
Resolution
Available to
Position Loop 1, 2
Feedback Accuracy3
Medium
16384 (14 bit)
Medium
16384 (14 bit)
High
2.62 x 10 5 (18 bits)
Low
+/- 600 arc sec
Medium
+/- 150 arc sec
Medium
+/- 480 arc sec
Medium
16384 (14 bit)
Medium
16384 ( 14 bit)
Medium absolute position
524288 (19 bits)
Very high
Medium
+/- 720 arc sec
High
+/- 60 arc sec
Medium
+/- 280 arc sec
High
For SinCos integral non-linearity +/- 45 arc sec
For SinCos differential non-linearity +/- 7 arc sec
(total accuracy+/-52 arc sec)
Very high
055-067 Motors
AR
Resolver
7V rms
Excitation 5kHz
CR
Incremental encoder
5Vdc
4096
EM (Multi-Turn)
FM (Single-Turn)
Inductive absolute encoder EnDat 2.1

(Heidenhain)
5Vdc
16
089-115 Motors
AE
Resolver
6V rms
Excitation 6kHz
CA
Incremental encoder
5Vdc
4096
EC (Multi-Turn)
FC (Single-Turn)
Inductive absolute encoder EnDat 2.1

(Heidenhain)
7 - 10Vdc
32
RA (Multi-Turn)
SA (Single-Turn)
SinCos optical encoder

Hiperface (SICK Stegmann)
7 - 12Vdc
1024
EB (Multi-Turn)
FB (Single-Turn)
Optical absolute encoder EnDat 2.2

(Heidenhain)
3.6 - 14Vdc
2048
1.04 x 106 (20 bits)

Very high
2.08 x 106 (21 bits)
+/-20 arc sec

(differential non-linearity +/- 1% signal period)
NOTES:
1
The sine and cosine outputs from the SinCos optical encoders are analog outputs; with Unidrive SP and Digitax ST, the resolutions quoted above are true when the encoder type
is set to either SC Endat or SC Hiper, depending on the encoder
2
The information is supplied by the feedback device manufacturer and relates to it as a standalone device; the values may change when mounted into the motor and connected to
a drive
3
The output from the resolver is an analog output; the resolution is determined by the analog-to-digital converter used; the value shown is when the resolver is used in
conjunction with the SM-Resolver Option Module
Motor Selection
Motor Derating
Adverse operating conditions require that the motor
performance be derated. These conditions include ambient
temperature above 104 F (40 C), motor mounting position,
drive switching frequency or a drive oversized for the motor.
Ambient Temperatures
For ambient temperatures above 104 F (40 C), the torque
must be derated using the following formula as a guideline
for motors up to 3000 rpm. Consult factory for higher-speed
motor derating information.
New derated torque =
Specified torque x 1 - ([ambient temperature* 40] / 100)
See the table below for motor derating factors (these figures
are for guidance only).
Motor Type/Frame
Switching
Frequency
055
067
089
115
3kHz
0.92
0.93
0.89
0.89
4kHz
0.93
0.94
0.91
0.92
5/6kHz
0.95
0.95
0.95
0.96
8kHz
0.96
0.98
0.97
0.98
10/12/16kHz
Mounting Arrangements
*Measured in C
For example, with an ambient temperature of 169 F (76 C),

the new derated torque will be 0.8 x specified torque.
12
Drive Switching Frequency

Most drive current ratings are reduced at higher switching
frequencies. See individual drive manuals for details.
In general, motor torque should be derated if the motor

mounting surface is heated from an external source such
as a gearbox, the motor is connected to a poor thermal
conductor, or the motor is mounted in a confined space with
restricted air flow.
Thermal Test Conditions

The performance data shown was recorded with an ambient
temperature of 68 F (20 C) and the motor mounted on a
thermally-isolated aluminum plate.
Thermal Isolator
Plate
230V and 460V HD Motor Holding Brake Specifications

Mechanical
Static
EngageAdded
Motor
Torque
ment Time
Added Inertia
Weight
Frame Power
Size Supply Current
(mm) (Vdc)
(A)
(lb-in) (Nm)
(ms)
(lb-in-sec2) (kgcm2) (kg)
055
24
0.27
15.9 1.8
24
0.00003
0.03
0.4
Shaft
Motor
Dynometer
Motor Type/Frame
(in)
(mm)
110 x 110 x 27
067, 089
9.8 x 9.8 x 0.6
250 x 250 x 15
115
13.8 x 13.8 x 0.8
350 x 350 x 20
067
24
0.27
17.7
24
0.00006
0.07
0.5
089
24
0.67
97.3
10
20
0.00035
0.115
0.6
115
24
0.67
97.3
25
10
0.00039
0.44
1.2
NOTES:
Figures shown in individual motor sections are at 68 F (20 C) ambient
Apply a derate factor of 0.7 to standard brake torque figures if motor temperature is
above 212 F (100 C)
Aluminum Heatsink Plate
4.3 x 4.3 x 1.06
055
Environmental Conditions
Any liquids or gases that may come into contact with the
motor must be confirmed to ensure compliance with the
correct international standards.
Thermal Protection
Thermistor protection to 293 F (145 C) is built into the
motor windings and gives an indication of serious overheating
problems. The installer must connect the thermistor to the
drive. Failure to do so will invalidate the motor warranty if
winding burns out.
13
NT Motor 230V
Compact NEMA or Metric Flange Motors
The NT Motor is a compact, high-performance motor
designed to maximize torque and minimize size. The NT Motor
uses powerful Neodymium magnets and is manufactured with
a segmented core to maximize stator efficiency.
NT Motors are available with direct motor-to-drive connector
terminations for Control Techniques Epsilon EP, Unidrive SP and
Digitax ST Servo drives cable lengths up to 20ft are available.
Key Features
Very low inertia for high acceleration and cycle rates
Medium inertia options
English (NEMA 23 or 34) or Metric (IEC- 72-1) flanges
Available with or without holding brakes
Direct connect available no additional cables required!
Flying-lead cabling option (ex: NTE-320-LONS-0000) with
improved ingress protection; flying leads are available with
or without MS connectors
IP65 conformance (IP67S and IP68S optional)
Standard 2048 optical encoder (absolute and resolver
feedback available)
Installed shaft seal are standard with all motors
White epoxy food-grade finish option
7.5
207
22.5
12.5
212
37.5
20
320
59.0
32
330
94.5
47
345
355
141
56
1
166
10
Continuous (lb-in)
100
Peak (lb-in)
Use the information below to create an order code for an

NT motor (top row is an example).
NT Motor 230V Order Information

NT
NT Motor Torque Range
Frame
Size
07
DP
Motor
Mounting
Flange
Frame
Size
(in)
Rated
Torque
(lb-in)
Lead Configuration
Brake
(24V)
Feedback Device
Inertia
Feedback Cable Connectors /

Optional Finish
Cable Length
NT
E=English
2 = 2
2in frame
IP65
00 = Std configuration
00 = Std configuration
M = Metric
3 = 3
07 = 7.5
C = MS connector
Lead Configuration T
Lead Config L, T And F
12 = 12.5
L = Flying leads
(no connectors)
DP = Flying lead with molded

15-pin feedback connector
to Digitax ST, Undrive SP and
Epsilon EP
10 = 10ft leads
Lead Configurations C, L,
T, E, F
20 = 20ft leads
E0 = White epoxy food-grade

finish applied to standard
motor*
XX = Custom lengths
available up to 20ft
max. in 2ft increments
2 = 2in NEMA 23
3 = 3in NEMA 34
3in frame
20 = 20
NOTES:
*Include this code when
ordering F type lead
configuration
**Not available on braked
motors or metric flange
30 = 32
T = MS style connector
on flying leads
45 = 47
IP67S
55 = 56
E = 90 circular Euro style
O=
Unbraked
B=
Holding
Brake
N = Incremental
encoder 2048ppr
Lead Configuration E
R = Resolver**
A = Inductive
Absolute**
EnDat 2.1 SinCos
IP68S
F = Flying lead and white
epoxy food-grade finish
Approvals
14
S = Low
(std)
10
05 = 5ft leads
15 = 15ft leads
NT Motor 2-inch Frame Ratings and Dimensions

Motor Frame Size
2in
Voltage
Model
230Vrms
NT-207
NT-212
7.5
12.5
0.85
1.4
Peak Torque (lb-in)
22.5
37.5
Peak Torque (Nm)
2.54
4.24
0.000094
0.000164
0.0000106
0.0000185
0.094
0.12
0.011
0.014
Motor Weight (lbs)
3.0
4.0
Motor Weight (kg)
1.36
1.81
Rated Speed 5000 rpm Kt (Nm/A) =
5.12
5.08
Kt (Nm/A) =
0.58
0.57
Ke (V/krpm) =
35
34.7
7.50
12.50
Rated Torque (Nm)
0.85
1.4
Stall Current (A)
1.7
2.7
0.432
0.740
Rated Power (kW)

R (ph-ph) ()
11.1
4.56
L (ph-ph) (mH)
39.1
18.9
NOTES:
t= 212 F (100 C) winding 104 F (40 C) maximum ambient; all data
subject to +/-10% tolerance
Stall torque, rated torque and power relate to maximum continuous
operation above 10kHz drive switching frequency
English Flange
NTE-207
Motor Dimensions
Metric Flange
NTE-212
NTM-207
NTM-212
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
Length Overall CONS/EONS*
5.55
141.0
6.55
166.4
5.55
141.0
6.55
166.4
Length Overall TONS/LONS/FONS
4.39
111.5
5.39
136.9
4.39
111.5
5.39
136.9
6.94
176.4
7.94
201.8
6.94
176.4
7.94
201.8
6.28
159.4
7.94
201.8
6.28
159.4
7.28
184.8
65.2
Length Overall CBNS/EBNS*
Length Overall TBNS/LBNS/FBNS
(mm)
Flange Square
2.27
57.7
2.27
57.7
2.57
65.2
2.57
Flange Thickness
0.29
7.5
0.29
7.5
0.29
7.5
0.29
7.5
Pilot Diameter
1.50
38.1
1.50
38.1
2.36
60.0
2.36
60.0
Pilot Thickness
0.10
2.5
0.10
2.5
0.10
2.5
0.10
2.5
Bolt Hole Diameter
0.21
5.2
0.21
5.2
0.23
5.8
0.23
5.8
Bolt Circle Diameter
Signal Connector Height CONS

Signal Connector Height TONS/LONS
Signal Connector Height CBNS
Signal Connector Height TBNS/LBNS
2.63
66.7
2.63
66.7
2.95
75.0
2.95
75.0
1.92
48.9
1.92
48.9
1.92
48.9
1.92
48.9
1.78
45.2
1.78
45.2
1.78
45.2
1.78
45.2
1.98
50.4
1.98
50.4
1.98
50.4
1.98
50.4
1.78
45.2
1.78
45.2
1.78
45.2
1.78
45.2
Shaft Length
1.21
30.7
1.21
30.7
0.93
23.5
0.93
23.5
Shaft Diameter
0.37
9.5
0.37
9.5
0.43
11.0
0.43
11.0
Shaft Key Dimensions
Keyway Length (min)
0.70
17.8
0.70
17.8
0.51
13.0
0.51
Keyway Depth
0.08
2.0
0.08
2.0
0.08
2.1
0.08
13.0
2.1
Keyway Width
0.13
3.2
0.13
3.2
0.16
4.0
0.16
4.0
NOTE:
*Not all variations are represented above; see our website for complete mechanical dimension drawings
15
NT Motor 3-inch Frame Ratings and Dimensions

Motor Frame Size
Voltage
Model
Peak Torque (lb-in)
Peak Torque (Nm)
Medium Inertia (lb-in-sec2)
Medium Inertia (kgm2)
Motor Weight (lbs)
Motor Weight (kg)
Rated Speed 3000 rpm Kt (lb-in/A) =
Kt (Nm/A) =
Ke (V/krpm) =
Rated Torque (Nm)
Stall Current (A)
Rated Power (kW)
R (ph-ph) ()
L (ph-ph) (mH)
Rated Speed 4000 rpm Kt (lb-in) =
Kt (Nm/A) =
Ke (V/krpm) =
Rated Torque (Nm)
Stall Current (A)
Rated Power (kW)
R (ph-ph) ()
L (ph-ph) (mH)
3in
230Vrms
NT-320
19.7
2.2
0.000328
59.0
6.67
0.000037
0.000558
0.000063
0.18
0.020
6.0
2.72
3.50
0.40
29.0
16.0
1.8
5.4
0.757
1.5
16.0
NT-330
31.5
3.56
0.000438
94.5
10.68
0.000049
0.000876
0.000098
0.315
0.036
7.3
3.31
ENCODER CONN: PT02E-16-23P

MATING CONN: PT06E-16-23S
(-CONS and -CBNS)
NT-345 NT-355
47.5
55.5
5.31
6.27
0.000668 0.000888
141.0
166.0
15.93
18.75
0.000075 0.000100
0.00146
0.000164
0.47
0.555
0.053
0.063
10.0
12.3
4.54
5.58
7.13
7.30
0.806
0.825
50.0
50.0
47.0
55.5
5.31
6.27
6.59
7.6
1.668
1.97
1.3
1.0
17.0
13.0
5.04
0.569
36.0
31.6
3.56
6.25
1.49
1.2
15.0
MOTOR CONN: PT02E-16-8P

MATING CONN:PT06E-16-8S
(-CONS and -CBNS)
F DRILLED THRU
G
(4) EQUALLY SPACED ON
45
SQ. (MAX)
BRAKE CONN: PT02E-8-3P

MATING CONN: PT06E-8-3S
(-CBNS)
2.559 [65.01]
MAX.
K (MIN)
Motor Dimensions
NOTES:
t= 212 F (100 C) winding 104 F (40 C) maximum ambient;
all data subject to +/-10% tolerance
Stall torque, rated torque and power relate to maximum continuous operation above
10kHz drive switching frequency
Max. intermittent winding temperature is 284 F (140 C)
NTE-330**
Metric Flange
NTE-345**
(in) (mm) (in) (mm) (in)
NTM-320**
NTM-330** NTM-345**
(mm)
(mm)
(in)
(mm)
Length Overall CONS/EONS*
5.22 132.5 5.82 147.8 7.02 178.3 9.42 239.2
5.22
132.5 5.82 147.8 7.02 178.3
9.42
239.2
Length Overall TONS/LONS/FONS
5.22 132.5 5.82 147.8 7.02 178.3 9.43 239.6
5.22
132.5 5.82 147.8 7.02 178.3
9.43
239.6
7.24 184.0 7.84 199.2 9.04 229.7 11.44 290.7
7.24
184.0 7.84 199.2 9.04 229.7 11.44 290.7
Length Overall TBNS/LBNS/FBNS
(in) (mm) (in)
NTM-355
(in)
(mm)
NTE-355
(in) (mm)
Length Overall CBNS/EBNS*
7.24 184.0 7.84 199.2 9.04 229.7 11.44 290.7
7.24
184.0 7.84 199.2 9.04 229.7 11.44 290.7
Flange Square
3.42
86.9
3.42
86.9
3.42
86.9
3.42
86.9
3.42
86.9
3.42 86.9
3.42
86.9
3.42
Flange Thickness
0.30
7.6
0.30
7.6
0.30
7.6
0.30
7.6
0.30
7.6
0.30
7.6
0.30
7.6
0.30
7.6
Pilot Diameter
2.88
73.0
2.88
73.0
2.88
73.0
2.88
73.0
3.15
80.0
3.15 80.0
3.15
80.0
3.15
80.0
3.0
86.9
Pilot Thickness
0.10
2.5
0.10
2.5
0.10
2.5
0.10
2.5
0.12
3.0
0.12
3.0
0.12
3.0
0.12
Bolt Hole Diameter
0.22
5.6
0.22
5.6
0.22
5.6
0.22
5.6
0.28
7.0
0.28
7.0
0.28
7.0
0.28
7.0
3.88
98.4
3.88
98.4
3.88
98.4
3.88
98.4
3.94
3.94
100.0
100.0 3.94 100.0 3.94 100.0
Signal Connector Height CONS
2.45
62.2
2.45
62.2
2.45
62.2
2.45
62.2
2.45
62.2
2.45 62.2
2.45
62.2
2.45
62.2
Signal Connector Height TONS/LONS
2.35
59.7
2.35
59.7
2.35
59.7
2.35
59.7
2.35
59.7
2.35 59.7
2.35
59.7
2.35
59.7
65.0
Signal Connector Height CBNS
Signal Connector Height TBNS/LBNS
2.56
65.0
2.56
65.0
2.56
65.0
2.56
65.0
2.56
65.0
2.56 65.0
2.56
65.0
2.56
2.50
63.5
2.50
63.5
2.50
63.5
2.50
63.5
2.50
63.5
2.50 63.5
2.50
63.5
2.50
63.5
Shaft Length
1.21
30.7
1.21
30.7
1.21
30.7
1.21
30.7
1.21
30.7
1.21 30.7
1.21
30.7
1.21
30.7
Shaft Diameter
0.50
12.7
0.50
12.7
0.50
12.7
0.50
12.7
0.55
14.0
0.55 14.0
0.55
14.0
0.55
14.0
Keyway Length (min)
0.84
21.3
0.84
21.3
0.84
21.3
0.84
21.3
0.79
20.0
0.79 20.0
0.79
20.0
0.79
20.0
Keyway Depth
0.08
2.0
0.08
2.0
0.08
2.0
0.08
2.0
0.10
2.6
0.10
2.6
0.10
2.6
0.10
2.6
Keyway Width
0.13
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.20
5.1
0.20
5.1
0.20
5.1
0.20
5.1
NOTES:
*Not all variations are represented above; see our website for complete mechanical dimensional drawings
**Motors are also available in medium inertia models with extended lengths; see website for dimensions
16
A**
English Flange
NTE-320**
NT Motor Flying Lead Details

LBNS, LONS
FONS, FBNS
Unbraked version shown
Motor Cable
Encoder Cable
Motor Cable
Undressed cables
Brake Cable
TONS, TBNS
Encoder Cable
Undressed cables
Brake Cable
PT02E-16-8P
EOxS
Motor Cable
Encoder Cable
PT02E-16-23P
Brake Cable
PT02E-8-3P
TBNS-DP, TONS-DP
Motor Cable
Encoder Cable
Brake Cable
NOTES:
Includes drive connector terminations specifically for Epsilon EP, Unidrive SP and Digitax ST
17
NT Motor Selection Considerations

Feedback Options
Feedback Device
Order Code
-T_NS, -C_NS, -L_NS,
-E_NS, -F_NS
SinCos or Incremental Resolution Available

Pulses per Revolution
to Position Loop
Feedback
Accuracy
Feedback Type
Encoder Supply Voltage
Incremental Encoder
5Vdc
2048
16384 (14 bits)
600 arc sec.
-EOAS
Inductive Absolute Encoder

EnDat 2.1 (Heidenhain)
Multi-Turn
5Vdc
16
262,000 (18 bits)
480 arc sec.
-EORS
Resolver
7-10Vdc, 7Vrms Excitation

10kHz
16384 (14 bits)
600 arc sec.
Motor Selection
Thermal Isolator
Plate
Motor Derating
Any adverse operating conditions require that the motor
Shaft
Motor
Dynometer

Motor Model
NT
Frame Size
Mounting Plate
Dimensions
2"
6" x 6" x "
3"
10" x 10 x 3/8"
Thermal Protection
Thermistor protection to 284 F (140 C) is built into the
motor windings and gives an indication of serious overheating
problems. The installer must connect the thermistor to the drive.
Failure to do so will invalidate the motor warranty if winding
burns out.
Ingress Protection
All NT Motors have shaft seals installed as standard. Standard
models have an ingress rating (IP rating) of IP65. Lead
configuration E models are rated IP67S. Configuration F
models are rated IP 68S.
NT Motor Holding Brake Specifications

Static Torque
Motor
Frame Size
(in)
Power
Supply
(Vdc)
Current
(A)
24
24
18
Added Inertia
(lb-in)
(Nm)
Mechanical Disengage
Time-Brake Release
Mechanical Engage
Time-Brake Hold
(lb-in-sec2)
(kgm2)
0.33
20
2.26
28ms
14ms
0.000106
0.000012
0.65
88.5
10.0
43ms
13ms
0.000968
0.000109
XV Motor 230V
Economical Metric AC Servo Motor
The XV Servo motor series is a high-performance, low-inertia
and high-torque motor in a compact economical package
ideal for high-volume applications. CE, UL and RoHS
approved, XV Motors offer low-cost solutions with the
features of a premium-priced servo offering.
Intended for higher throughputs and smaller machines, XV
Motors are available in 4 frame sizes: 40, 60, 80 and 130mm
with speeds ranging from 2000 to 5000rpm. Applications
with continuous torque requirements up to 101lb-in
(11.4Nm) are the perfect match for XV Motors.
XV Motors with 40, 60 and 90mm are fitted with AMP (Tyco
Mate-n-Lock) connectors on 1-ft flying leads. (For added strain
relief, these connectors can be snapped into place through
holes in panels or brackets.)
Key Features
Speed rating to 5000rpm
Four frame sizes: 40, 60, 80 and 130mm
CE, UL and RoHS approved
Ambient operating temperature: 32 to 122 F (0 to 40 C)
Atmosphere: no corrosive gas, flammable gas, oil mist
or dust
Order Code
60
Motor
Frame
Size
(mm)
Connections
Brake
XVM =
40
C = MS connector
230V
60
T = AMP
connector
on flying leads
(40-80 frame)
O=
Unbraked
130
Approvals
40
8.5
60
12
80
34
30
85
130
101
1
300
10
Continuous (lb-in)
100
Peak (lb-in)
Order Information
XVM
80
XV Motor Torque Range
Frame
Size
B = 24V
Holding
Brake
N
Feedback
Device
N=
Incremental
encoder
2048ppr
0000
Inertia
Specials
S = Std
Low voltage
windings
Rated Torque
Motor Only
Brake Motor
Frame
(mm)
(lb-in)
40
0.9
0.1
XVM-401-TONS-0000
XVM-401-TBNS-0000
40
1.4
0.16
XVM-402-TONS-0000
XVM-402-TBNS-0000
40
2.8
0.32
XVM-403-TONS-0000
XVM-403-TBNS-0000
60
2.8
0.32
XVM-604-TONS-0000
XVM-604-TBNS-0000
60
5.7
0.64
XVM-606-TONS-0000
XVM-606-TBNS-0000
60
11.24
1.27
XVM-6011-TONS-0000
XVM-6011-TBNS-0000
80
16.9
1.91
XVM-8017-TONS-0000
XVM-8017-TBNS-0000
80
22.6
2.55
XVM-8022-TONS-0000
XVM-8022-TBNS-0000
80
23.3
2.63
XVM-8023-TONS-0000
XVM-8023-TBNS-0000
80
28.1
3.18
XVM-8028-TONS-0000
XVM-8028-TBNS-0000
130
46.5
5.25
XVM-13046-CONS-0000
XVM-13046-CBNS-0000
130
50.7
5.73
XVM-13051-CONS-0000
XVM-13051-CBNS-0000
130
67.6
7.64
XVM-13068-CONS-0000
XVM-13068-CBNS-0000
130
88.8
10.03
XVM-13089-CONS-0000
XVM-13089-CBNS-0000
130
101.4
11.46
XVM-130101-CONS-0000
XVM-130101-CBNS-0000
(Nm)
Order Code
19
XV Motor 40mm Frame Ratings and Dimensions

Motor Frame Size
TONS
TBNS
40mm
Voltage
230V
Model XVM-401 XVM-402 XVM-403

0.95
1.4
2.8
0.11
0.16
0.32
Peak Stall Torque (lb-in)
2.4
4.5
7.7
Peak Stall Torque (Nm)
0.27
0.51
0.87
0.00001
0.00002
0.00004
Standard Inertia (kgm ) 0.000001 0.000002 0.000005

2
Maximum Cogging (lb-in) (typ.)
0.02
0.03
0.06
Maximum Cogging (Nm) (typ.)
0.002
0.003
0.007
Std Motor Weight Unbraked (Lbs)
0.7
0.88
1.1
Std Motor Weight Unbraked (Kg)
0.32
0.40
0.50
0.89
1.24
2.8
Max. Speed 5000 rpm Kt (Nm/A) =
0.101
0.140
0.32
7.8
10.6
12.7
Ke (V/krpm) =
0.95
1.4
3.09
Rated Torque (Nm)
0.11
0.16
0.35
Stall Current (A)
1.07
1.20
1.38
Rated Power (kW)
0.034
0.050
0.110
R (ph-ph) ()
11.69
9.4
6.89
L (ph-ph) (mH)
8.54
8.27
6.73
Flying lead length 1ft on 40mm, 60mm and 80mm
NOTE:
The 40mm-frame XV Motor has a 1-ft cable terminated with a Tyco
Mate-n-Lock connector
XVM-401
Dimensions
Length Overall TONS/LONS (max)
Length Overall TBNS/LBNS (max)
XVM-403
(mm)
(in)
(mm)
(in)
2.98
76.0
3.27
83.0
3.92
(mm)
99.5
4.41
112.0
4.72
120.0
5.35
136.0
40.0
Flange Square
1.57
40.0
1.57
40.0
1.57
Flange Thickness
0.20
5.0
0.2
5.0
0.20
5.0
Pilot Diameter
1.18
30.0
1.18
30.0
1.18
30.0
2.5
Pilot Thickness
0.10
2.5
0.1
2.5
0.10
Bolt Hole Diameter
0.18
4.5
0.18
4.5
0.18
4.5
1.81
46.0
1.81
46.0
1.81
46.0
1.22
31.0
1.22
31.0
1.22
31.0
1.22
31.0
1.22
31.0
1.22
31.0
Signal Connector Height TONS/LONS (max)

Signal Connector Height TBNS/LBNS (max)
Shaft Length
0.98
25.0
0.98
25.0
0.98
25.0
Shaft Diameter
0.31
8.0
0.31
8.0
0.31
8.0
NOTE:
All 40mm-frame XV Motors have smooth shafts
20
XVM-402
(in)
XV Motor 60/80mm Frame Ratings and Dimensions

Motor Frame Size
60mm
80mm
Voltage
Model
230V
XVM604
XVM606
XVM6011
XVM8017
XVM8022
XVM8023
XVM8028
2.81
5.7
11.2
16.9
22.6
23.3
28.1
0.32
0.64
1.27
1.91
2.55
2.72
3.18
8.45
16.1
32.3
48.6
62.7
67.1
81.1
0.95
1.82
3.65
5.49
7.08
7.58
9.16
0.00010
0.00016
0.00028
0.00096 0.001335 0.001335 0.001705
Standard Inertia (kgm2) 0.000011 0.000018 0.000032 0.00011
0.00015
0.00015
0.06
0.11
0.24
0.18
0.23
0.24
0.00019
0.28
0.006
0.013
0.027
0.020
0.026
0.027
0.032
Std Motor Weight Unbraked (Lbs)
1.85
2.4
3.5
5.4
6.94
6.9
8.37
Std Motor Weight Unbraked (Kg)
0.84
1.09
1.59
2.45
3.15
3.14
3.80
6.32
0.714
Ke (V/krpm) =
44.6
24.1
Rated Torque (Nm)
2.72
Stall Current (A)
TONS
TBNS
3.82
0.8556
Rated Power (kW)

R (ph-ph) ()
1.29
L (ph-ph) (mH)
Flying lead length 1ft on 40mm, 60mm and 80mm
9.1
1.82
3.76
4.15
5.0
5.04
5.5
0.206
0.425
0.469
0.565
0.569
0.621
Ke (V/krpm) =
12.43
29.3
29.5
35.2
35.6
39.2
2.81
6.13
12
17.9
22.6
28.1
Rated Torque (Nm)
0.32
0.69
1.36
2.02
2.55
3.18
Stall Current (A)
1.54
1.52
2.89
3.58
4.83
5.37
Rated Power (kW)
0.100
0.218
0.426
0.635
0.802
0.998
R (ph-ph) ()
2.49
4.15
1.64
1.43
0.87
0.75
L (ph-ph) (mH)
7.37
15.21
7.32
9.2
5.9
5.04
NOTE:
The 60mm and 80mm-frame XV Motors have a 1-ft cable terminated with a Tyco Mate-n-Lock connector
XVM-604
Dimensions
Length Overall TONS/LONS (max)
Length Overall TBNS/LBNS (max)
XVM-606
XVM-6011
XVM-8017
XVM-8022
XVM-8023
XVM-8028
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
3.64
92.5
4.17
106.0
5.28
134.0
5.43
138.0
6.22
158.0
7.01
(mm)
178.0
5.14
130
5.75
146.0
6.85
174.0
7.01
178.0
7.80
198.0
8.58
218.0
Flange Square
2.44
62
2.44
62.0
2.44
62.0
3.15
80.0
3.15
80.0
3.15
80.0
Flange Thickness
Pilot Diameter
C
D
0.24
1.97
6
50
0.24
1.97
6.0
50.0
0.24
1.97
6.0
50.0
0.43
2.76
11.0
70.0
0.43
2.76
11.0
70.0
0.43
2.76
11.0
70.0
Pilot Thickness
0.12
0.12
3.0
0.12
3.0
0.12
3.0
0.12
3.0
0.12
3.00
Bolt Hole Diameter
0.24
0.24
6.0
0.24
6.0
0.26
6.60
0.26
6.6
0.26
6.60
Signal Connector Ht. TONS/LONS (max)

Signal Connector Ht. TBNS/LBNS (max)
2.76
70
2.76
70.0
2.76
70.0
3.54
90.0
3.54
90.0
3.54
90.0
1.73
44
1.73
44.0
1.73
44.0
2.09
53.0
2.09
53.0
2.09
53.0
1.73
44
1.73
44.0
1.73
44.0
2.09
53.0
2.09
53.0
2.09
53.0
Shaft Length
1.18
30
1.18
30.0
1.18
30.0
1.57
40.0
1.57
40.0
1.57
40.0
Shaft Diameter
0.55
14
0.55
14.0
0.55
14.0
0.63
16.0
0.63
16.0
0.63
16.0
30.0

Keyway Length (min)
0.89
22.5
0.89
22.5
0.89
22.5
1.18
30.0
1.18
30.0
1.18
Keyway Depth
0.12
0.12
3.0
0.12
3.0
0.12
3.0
0.12
3.0
0.12
3.0
Keyway Width M
0.197
.197
5.0
0.197
5.0
0.20
5.0
0.20
5.0
0.20
5.0
NOTE:
All 40mm-frame XV Motors have smooth shafts
21
XV Motor 130mm Frame Ratings and Dimensions

Motor Frame Size
CONS
CBNS
130mm
Voltage
230V
XVM13046
XVM13051
XVM13068
XVM13089
XVM130101
46.5
50.7
67.6
88.8
101.4
5.25
5.73
7.64
10.03
11.46
137
147.8
199.2
260.4
296.4
15.48
16.70
22.51
29.42
33.49
0.01061
0.01061
0.01535
0.01535
0.02001
0.00226
Model
0.00120
0.00120
0.00173
0.00173
0.47
0.51
0.68
0.89
1.01
0.053
0.057
0.076
0.100
0.115
Std Motor Weight Unbraked (lbs)
15.86
15.8
19.1
21.3
22.47
Std Motor Weight Unbraked (kg)
7.21
7.18
8.68
9.68
10.21
12.57
13.45
13.6
1.420
1.520
1.537
Ke (V/krpm) =
85.8
94.6
89.96
50.7
88.76
101.4
Rated Torque (Nm)
5.73
10.03
11.46
Stall Current (A)
4.15
6.75
7.63
Rated Power (kW)
0.600
1.050
1.200
R (ph-ph) ()
1.9
1.41
0.87
L (ph-ph) (mH)
20.1
15.99
10.67

7.5
7.4
0.847
0.836
Ke (V/krpm) =
53.1
54.21
46.5
67.6
Rated Torque (Nm)
5.25
7.64
Stall Current (A)
6.28
9.23
Rated Power (kW)
1.101
1.600
R (ph-ph) ()
0.77
0.47
L (ph-ph) (mH)
7.76
5.3
CONS
CBNS
XVM-13046
Dimensions
(in)
Length Overall CONS (max)

Length Overall CBNS (max)
(mm)
XVM-13051
XVM-13068
(in)
(in)
(mm)
(mm)
XVM-13089 XVM-130101
(in)
(mm)
(in)
(mm)
6.61 168.0
6.61 168.0
7.56 192.0
7.56 192.0
8.50 216.0
10.0 254.0
8.11 206.0
8.11 206.0
9.06 230.0
9.06 230.0
Flange Square
5.12 130.0
5.12 130.0
5.12 130.0
5.12 130.0
5.12 130.0
Flange Thickness
0.55
0.55
0.55
0.55
0.55
Pilot Diameter
4.33 110.0
14.0
14.0
4.33 110.0
14.0
4.33 110.0
14.0
4.33 110.0
14.0
4.33 110.0
Pilot Thickness
0.24
6.0
0.24
6.0
0.24
6.0
0.24
6.0
0.24
6.0
Bolt Hole Diameter
0.35
9.0
0.35
9.0
0.35
9.0
0.35
9.0
0.35
9.0
5.71 145.0
5.71 145.0
5.71 145.0
5.71 145.0
5.71 145.0
4.41 112.0
4.41 112.0
4.41 112.0
4.41 112.0
4.41 112.0
4.41 112.0
4.41 112.0
4.41 112.0
4.41 112.0
4.41 112.0
Signal Connector Ht Unbraked (max)

Signal Connector Ht Braked (max)
Shaft Length
2.28
58.0
2.28
58.0
2.28
58.0
2.28
58.0
2.28
58.0
Shaft Diameter
0.75
19.0
0.75
19.0
0.87
22.0
0.87
22.0
0.87
22.0
25.0
22
Keyway Length (min)
0.98
25.0
0.98
25.0
0.98
25.0
0.98
25.0
0.98
Keyway Depth
0.12
3.0
0.12
3.0
0.14
3.50
0.14
3.50
0.14
3.5
Keyway Width M
0.20
5.0
0.20
5.0
0.24
6.0
0.24
6.0
0.24
6.0
XV Motor Selection Considerations

XV Motor Feedback All Frame Sizes
XV Motors include a 5Vdc incremental encoder with 2048
pulses per revolution.
Motor Selection
Motor Derating
must be derated.
Thermal Protection
The XV Motors do not have and are not offered with a
winding thermal temperature sensor. Motor feedback cables
have the Motor Temperature Sensor lines defeated (shorted
between pin 14 (GND) and pin 15 (5V)). These cables include
cable model numbers XUFTS-xxx and XUFCS-xxx (where -xxx
is cable length in feet).
All Control Techniques Servo drives have a current-limiting
algorithm in the firmware specifically to limit current
levels. When properly matched and limited to the motor
specifications, the drive firmware will fault the drive when
the rated rms current of the motor is exceeded.
Ingress Protection
Standard models have an ingress rating (IP rating) as listed in
the table below.
Frame Size
IP rating
Exclusions
40mm
IP55*
Shaft through area of face plate and connectors
60mm
IP55*
80mm
IP65*
130mm
IP65*
Shaft through area of face plate
NOTE:
* Shaft seal option is not available
XV Motor Holding Brake Specifications
Thermal Isolator
Plate
Shaft
Motor
Dynometer
Mechanical
Engagement
Time
Motor
Frame
Size
(mm)
Power
Supply
(Vdc)
Current
(A)
(lb-in)
(Nm)
(ms)
(lb-in-sec2)
(kgcm2)
(kg)
40
24
0.25
2.8
0.318
20
0.0000023
0.003
0.2
60
24
0.27
13.0
1.47
50
0.000045
0.048
0.6
80
24
0.38
28.6
3.23
60
0.00011
0.125
0.7
Static Torque
Added Inertia
Added
Weight
130
24
0.29
70.8
8
40
0.000478
0.54
0.83
NOTES:
Figures shown in individual motor sections are at 68 F (20 C) ambient
Apply a derate factor of 0.7 to standard brake torque figures if motor temperature
is above 212 F (100 C)
Motor Frame
(mm)
(in)
(mm)
40
5.91 x 5.91 x 0.24
150 x 150 x 6
60
5.91 x 5.91 x 0.24
150 x 150 x 6
80
9.84 x 9.84 x 0.39
250 x 250 x 10
130
9.84 x 9.84 x 0.39
250 x 250 x 10
23
Unimotor FM 230V / 460V

Flexible Configuration, Medium-inertia Servo Motors
Unimotor FM is a high-performance, brushless AC Servo
motor range matched for use with Control Techniques
drives. FM stands for flexible motor and is designed to
accommodate a wide range of applications. The motors
are available in seven frame sizes with various mounting
arrangements and motor lengths. Control Techniques
motors and drives are designed to function as an optimized
system. Unimotor FM is the perfect partner for Unidrive SP,
Digitax ST and Epsilon EP Servo drives.
Key Features
Optional high peak torque motors; up to 5 times
stall torque
Medium inertia design with high inertia option available
Connector styles include vertical, 90 low profile and
90 rotatable
Variety of flange possibilities (IEC/NEMA)
55 15
142
IP65 conformance
190
239
358
406
207
542
621
648
10
Multiple feedback options:
104
135
Speeds include 1500, 2000, 2500, 3000, 4000, 4500, 5000

and 6000rpm
100
Continuous (lb-in)
828
1938
1000
Peak (lb-in)
High peak opt. (lb-in)
Electronic Nameplate Capability
Resolver: robust for extreme applications and

conditions lower accuracy, medium resolution
Incremental encoder: high accuracy, medium resolution
Inductive absolute: medium accuracy, medium
resolution, single-turn and multi-turns
Optical SinCos/absolute: high accuracy, high resolution,
single-turn and multi-turn
Hiperface (SICK) and EnDAT (Heidenhain) protocols
supported
Approvals
QUALITY
MANAGEMENT
ISO 9001
003
FM30610
24
80
80
95
Standard and high-energy dissipation brake options
58
35
75
115
Winding to suit 230V and 460V
Unimotor FM Torque Range
Frame
Size
When a Control Techniques Servo drive is connected to a

Unimotor FM fitted with a SinCos or absolute encoder, it can
recognize and communicate with the motor to obtain the
electronic nameplate data. This motor data can then be
used to automatically optimize the drive settings. This
feature simplifies commissioning and maintenance, ensures
consistent performance and saves time.
Unimotor FM Order Information

Use the information below to create an order code for a Unimotor FM (top row is an example).
95
30
CA
100
190
Frame
Size
Motor
Voltage
Peak Torque
Selection
Stator Length
Winding
Speed RPM
Holding Brake
Connection Type
Feedback Device
Inertia
BCD**
Shaft Dia.
55
E = 230V
055 Frame
75
U = 460V
2 = Standard
peak torque
95
075-142 Frame
115
2 = Standard
peak torque
142
190
055 Frame
055 Frame
A-C
075 Frame
30 = 3000
60 = 6000
075-190
Frame
10 = 1000
A-D
095-142
Frame
A-E
P = High peak
torque
190 Frame
190 Frame
A-F
20 = 2000
30 = 3000
40 = 4000
2 = Standard
peak torque
60 = 6000
055 Frame
055 Frame
Output
Shaft
0 = Not fitted (Std)
B = Power and signal

90 rotatable (Std)
A = Key
(Std)
1 = Holding brake
fitted 24Vdc
075-190 Frame
C = Power 90 rotatable B = Plain

and signal vertical
Shaft
0 = Not fitted (Std)
V = Power and signal

vertical
1 = Holding brake
fitted 24Vdc
075-190 Frame
5 = High energy
dissipation holding
brake
055 Frame Only
055 Frame Only 055 Frame Only 055 Frame Only

A = Std.
63
Std
9.0
CR = Incremental encoder
4096 ppr
075-190
Frame only
70
Opt
11.0
A-C
14.0
Max
MR = Incremental encoder
2048 ppr*
A = Std.
AR = Resolver
KR = Incremental encoder
1024 ppr
A = Power and signal

90 fixed
EM = Inductive Absolute
Multi-Turn EQI 1130
B = Power and signal

90 rotatable
FM = Inductive Absolute
Single-Turn ECI 1118
C = Power 90 rotatable
and signal vertical
TL = Optical SinCos
Multi-Turn SKM 36
V = Power and signal

vertical (Std)
UL = Optical SinCos
Single-Turn SKS 36
075 Frame
B = High
Inertia
EB = Optical Absolute MultiTurn EQN 1325
EC = Inductive Absolute
Multi-Turn EQI 1331
Unbraked Motors
Stall Torque
(lb-in) (Nm)
Speed
rpm
230V
Order Code
Stall
Current
(A)
460V
Order Code
Stall
Current
(A)
18.7
1.65
3000
055E2C300BACRA063110
1.81
055U2C300BACRA063110
1.0
18.7
1.65
6000
055E2C600BACRA063110
3.44
055U2C600BACRA063110
2.0
10.6
1.2
4000
075E2A400BACAA075110
1.7
19.5
2.2
3000
075E2B300BACAA075140
2.4
075U2B300BACAA075140
1.4
19.5
2.2
4000
075E2B400BACAA075140
3.1
075U2B400BACAA075140
1.9
27.4
3.1
4000
075E2C400BACAA075140
4.4
34.5
3.9
3000
075E2D300BACAA075140
4.2
075U2D300BACAA075140
2.5
38.1
4.3
3000
095E2B300BACAA100190
4.7
095U2B300BACAA100190
2.7
38.1
4.3
4000
095E2B400BACAA100190
6.0
095U2B400BACAA100190
3.6
66.4
7.5
3000
095E2D300BACAA100190
8.1
095U2D300BACAA100190
4.7
66.4
7.5
4000
095E2D400BACAA100190
10.5
095E2E300BACAA100190
9.7
79.7
3000
4000
095U2E400BACAA100190
7.5
58.4
6.6
3000
115U2B300BACAA115190
4.2
83.2
9.4
3000
115E2C300BACAA115190
10.2
109.7 12.4
3000
115E2D300BACAA115240
13.4
115U2D300BACAA115240
7.8
135.4 15.3
3000
115E2E300BACAA115240
16.5
115U2E300BACAA115240
9.6
95.6
3000
142E2B300BACAA165240
11.7
142U2B300BACAA165240
6.8
135.4 15.3
3000
142U2C300BACAA165240
9.6
19.8
3000
142U2D300BACAA165240
12.4
207.1 23.4
3000
142U2E300BACAA165240
14.7
363.7 41.1
3000
190U2D300BACAA215320
25.7
175
11.0
85
Opt
14.0
B-D
19.0
Max
100
Std
98
Opt
14.0
115
Opt
19.0
B-E
22.0
Max
095 Frame
115
Std
130
Opt
19.0
145
Opt
24.0
D-E
32.0
Max
165
Std
149
Opt
190 Frame
215
075 Frame
115 Frame
142 Frame
24.0
A-E
32.0
Max
Std
NEMA flange
A-C
190 Frame
32.0
A-H
42.0
Max
FC = Inductive Absolute
Single-Turn ECI 1319
RA = Optical SinCos
Multi-Turn SRM 50
SA = Optical SinCos
Single-Turn SRS 50
190 Frame
AE = Resolver*
79.7
10.8
Opt
142 Frame
CA = Incremental encoder
4096 ppr*
FB = Optical Absolute
Single-Turn ECN 1313
Std
80
115 Frame
AE = Resolver
Stocked Motors
75
095 Frame
075-142 Frame
Opt
CA = Incremental encoder
(Std for 190) 4096 ppr*
EB = Optical Absolute
Multi-Turn EQN 1325
FB = Optical Absolute
Single-Turn ECN 1313
RA = Optical SinCos
Multi-Turn SRM 50
SA = Optical SinCos
Single-Turn SRS 50
NOTES:
*Stocked motor standard feedback
**Limited quantities normally stocked
Stocked motors cover the range of FM motors and are
available with short lead times for low quantities
Consult factory for lead times for high-volume orders or
on select feedback options
Brake motors are not included in stock motor list
25
Unimotor FM 55mm Frame Ratings

055E2
Voltage
230V
Frame Length
055U2
460V
6.37
10.4
14.6
6.37
10.4
14.6
0.72
1.18
1.65
0.72
1.18
1.65
Standard (2) Peak Torque Selection Max (lb-in)
25.5
41.8
58.4
25.4
41.7
58.4
Standard (2) Peak Torque Selection Max (Nm)
2.88
4.72
6.60
2.88
4.72
6.60
0.00009
0.00018
0.00027
0.00009
0.00018
0.00027
Standard Inertia (kgm)
0.000012
0.000023
0.000034
0.000012
0.000023
0.000034
Winding Thermal Time Const. (s)
34.00
38.00
42.00
34.00
38.00
42.00
Motor Weight (lbs)
2.65
3.31
3.97
2.65
3.31
3.97
Motor Weight (kg)
1.20
1.50
1.80
1.20
1.50
1.80
6.55
7.70
8.05
6.55
13.19
14.60
1.65
Kt (Nm/A) =
0.74
0.87
0.91
0.74
1.49
Ke (V/krpm) =
45.00
52.50
55.00
45.00
90.00
100
6.20
9.29
13.1
6.20
9.29
13.1
Rated Torque (Nm)
0.70
1.05
1.48
0.70
1.05
1.48
Stall Current (A)
0.97
1.36
1.81
0.97
0.79
1.00
Rated Power (kW)
0.22
0.33
0.46
0.22
0.33
0.46
R (ph-ph) ()
28.00
14.10
9.50
28.00
45.00
31.00
L (ph-ph) (mH)
50.00
32.00
23.00
50.00
100.00
75.00
3.98
3.81
4.25
6.55
6.99
7.35
Kt (Nm/A) =
0.45
0.43
0.48
0.74
0.79
0.83
Ke (V/krpm) =
27.00
26.00
29.00
45
47.5
50
6.02
7.97
10.6
6.02
7.97
10.6
Rated Torque (Nm)
0.68
0.90
1.20
0.68
0.9
1.20
Stall Current (A)
1.61
2.74
3.44
0.97
1.5
2.00
Rated Power (kW)
0.43
0.57
0.75
0.43
0.57
0.75
R (ph-ph) ()
8.50
3.60
2.40
28.00
10.7
7.80
L (ph-ph) (mH)
16.00
8.20
6.30
50.00
25
20.00
NOTES:
t = 212 F (100 C) winding 104 F (40 C) maximum ambient
All data subject to 10% tolerance
Stall torque, rated torque and power relate to maximum continuous operation tested in a 68 F (20 C) ambient at 12kHz drive switching frequency
Control Techniques has an ongoing process of development and reserves the right to change the specification without notice
All other figures relate to a 68 F (20 C) motor temperature; maximum intermittent winding temperature is 284 F (140 C)
Matched Motor and Drive Combinations

Control Techniques motors and drives are designed to
function as an optimized system. Unimotor FM is the
perfect partner for Unidrive SP, Digitax ST and Epsilon EP
Servo drives.
26
Unimotor FM 55mm Frame Dimensions

D
NOTE: Output key dimensions

(E,F,G and H) are applicable
to keyed units only.
M E
Optional
key
P
Motor flange
4 holes R (H14)
equispaced on a
mounting BCD S
K
N
F
G
C
H
Tapped hole
thread size
I to depth J
T
Motor housing
Frame Length
A
Motor Dimensions
Unbraked Length
Braked Length
A
B
Optional Flange
Dimensions
(in)
(mm)
(in)
(mm)
(in)
(mm)
4.6
118.0
5.6
142.0
6.5
166.0
3.5
90.0
4.5
114.0
5.4
(in)
(mm)
138.0
Flange Thickness
0.24
6.0
0.12
3.0
1.97
50.0
60.0
6.2
158.0
7.2
182.0
8.1
206.0
5.1
130.0
6.1
154.0
7.0
178.0
Mounting Hole Dia.
(mm)
Flange Square
2.36
0.22
5.5
2.76
70.0
Flange Thickness
0.3
7.0
Mounting Hole Dia.
Register Length
0.1
2.5
Mounting Hole BCD
Register Diameter
1.6
40.0
Mounting Bolts
Flange Square
2.2
55.0
Mounting Hole Dia.
0.2
5.8
Mounting Hole BCD
2.5
63.0
Motor Housing
2.2
55.0
Mounting Bolts
9.0mm
Frame Length
Unbraked Length
11.0mm Std.
14.0mm Opt.
(in)
(mm)
(in)
(mm)
(in)
(mm)
Shaft Diameter
0.35
9.0
0.43
11.0
0.55
14.0
Shaft Length
D1
0.79
20.0
0.91
23.0
1.18
30.0
Key Height
0.40
10.2
0.49
12.5
0.63
16.0
Key Length
F3
0.59
15.0
0.59
15.0
0.98
25.0
Key-to-Shaft End
G4
0.04
1.0
0.06
1.5
0.06
1.5
0.12
3.0
0.16
4.0
0.20
5.0
Key Width
Tapped Hole Depth
J5
M4 x 10.0
0.39
10.0
0.45mm, 2To IEC 72-1, 30.25mm, 41.1mm, 50.4mm
M4 x 10.0
0.39
10.0
M5 x 12.5
0.49
M5
Vertical Connectors
Dimensions
M5
Shaft Dimensions
BCD Code
Front End Frame

Type - Flat
Register Length
(in)
For vertical
connectors,
allow
approximately
175.0mm
clearance for
mating cable
12.5
Braked Length
Power Connector Height

Signal Connector Height
(in)
(mm)
(in)
(mm)
(in)
B1
2.95
75.0
3.90
99.0
4.84
123.0
B2
3.27
83.0
4.21
107.0
5.16
131.0
B1
4.53
115.0
5.47
139.0
6.42
163.0
B2
4.84
123.0
5.79
147.0
6.81
173.0
(in)
(mm)
4.09
104.0
3.66
93.0
(in)
(mm)
3.9
99.0
(mm)
Optional Connector Height

Connector Type
B
C
V
3.8
96.0
4.1
105.0
27

075E2
Voltage
230V
Frame Length
075U2
460V
10.6
19.5
27.4
34.5
10.6
19.5
27.4
34.5
1.2
2.2
3.1
3.9
1.2
2.2
3.1
3.9
31.9
58.4
82.3
104
31.9
58.4
82.3
104
11.7
3.6
6.6
9.3
11.7
3.6
6.6
9.3
High (P) Peak Torque Selection Max (lb-in)
53.1
97.4
137
173
53.1
97.3
137
173
High (P) Peak Torque Selection Max (Nm)
6.0
11.0
15.5
19.5
6.0
11.0
15.5
19.5
0.00062
0.00106
0.00142
0.00177
0.00062
0.00106
0.00142
0.00177
0.00007
0.00012
0.00016
0.00020
0.00007
0.00012
0.00016
0.00020
High Inertia (lb-in-sec2)
0.00097
0.00133
0.00177
0.00212
0.00097
0.00133
0.00177
0.00212
High Inertia (kgm)
0.00011
0.00015
0.00020
0.00024
0.00011
0.00015
0.00020
0.00024
81.0
74.0
94.0
100.0
81.0
74.0
94.0
100.0
Motor Weight (lbs)
7.94
9.70
11.46
13.23
7.94
9.70
11.46
13.23
Motor Weight (kg)
3.6
4.4
5.2
6.0
3.6
4.4
5.2
6.0
12.4
21.24
Kt (Nm/A) =
1.4
2.4
Ke (V/krpm) =
85.5
147
9.74
18.6
26.6
33.6
9.74
18.6
26.6
33.6
Rated Torque (Nm)
1.1
2.1
3.0
3.8
1.1
2.1
3.0
3.8
Stall Current (A)
0.9
1.6
2.3
2.8
0.5
1.3
1.7
Rated Power (kW)
0.23
0.44
0.63
0.8
0.23
0.44
0.63
0.8
R (ph-ph) ()
45.8
15.3
8.52
5.72
144
48.2
25.0
15.7
L (ph-ph) (mH)
74.1
34.71
21.5
16.16
214
99.2
59.2
44.7
8.23
14.16
Kt(Nm/A) =
0.93
1.6
Ke (V/krpm) =
57
98
9.74
17.7
24.8
31.0
9.74
17.7
24.8
31.0
Rated Torque (Nm)
1.1
2.0
2.8
3.5
1.1
2.0
2.8
3.5
Stall Current (A)
1.3
2.4
3.4
4.2
0.8
1.4
2.0
2.5
Rated Power (kW)
0.35
0.63
0.88
1.1
0.35
0.63
0.88
1.1
R (ph-ph) ()
15.91
6.22
3.35
2.37
60.8
20.1
10.5
7.5
L (ph-ph) (mH)
30.33
14.74
9.54
7.08
98.4
41.8
27.6
19.7
6.37
Kt (Nm/A) =
0.72
1.2
44
73.5
Ke (V/krpm) =
10.62
8.85
15.1
20.4
25.7
8.85
15.1
20.4
25.7
Rated Torque (Nm)
1.0
1.7
2.3
2.9
1.0
1.7
2.3
2.9
Stall Current (A)
1.7
3.1
4.4
5.5
1.0
1.9
2.6
3.3
Rated Power (kW)
0.42
0.71
0.96
1.21
0.42
0.71
0.96
1.21
R (ph-ph) ()
12.1
4.05
2.3
1.48
36.8
10.5
6.3
4.2
L (ph-ph) (mH)
19.6
8.88
5.85
4.2
54.9
24.8
14.9
10.8
4.16
7.08
Kt (Nm/A) =
0.47
0.8
Ke (V/krpm) =
28.5
49
7.97
14.2
18.6
23.0
7.97
14.2
18.6
23.0
Rated Torque (Nm)
0.9
1.6
2.1
2.6
0.9
1.6
2.1
2.6
Stall Current (A)
2.6
4.7
6.6
8.3
1.5
2.8
3.9
4.9
Rated Power (kW)
0.57
1.01
1.32
1.63
0.57
1.01
1.32
1.63
R (ph-ph) ()
5.2
1.77
0.95
0.65
15.0
5.0
2.66
1.9
L (ph-ph) (mH)
8.3
3.7
3.1
1.86
24.0
10.6
6.8
4.8
NOTES:
28

D

90 connectors are standard
F
G
C (j6)
H (h9)
4 holes R (H14)
equispaced on a
mounting BCD S
K Flange
P
Motor flange
N
E
M (j6)
Tapped hole
thread size
I to depth J
T
Motor housing
Frame Length
A
Motor Dimensions
Unbraked Length
Braked Length
Flange Thickness
(in)
B
(mm)
(in)
BCD Code
C
(mm)
(in)
Optional Flange
Dimensions
D
(mm)
(in)
(mm)
8.20 208.2
9.38 238.2 10.56 268.2 11.74 298.2
6.19 157.2
7.37 187.2
075
080
085
(in)
(mm)
(in)
(mm)
(in)
(mm)
Register Dia. (J6)
2.36
60.0
2.36
60.0
2.76
70.0
9.73 247.2
Flange Square
2.76
70.0
2.76
70.0
3.15
80.0
9.97 253.2 11.15 283.2 12.33 313.2 13.51 343.2
Mounting Hole Dia. (H14)
7.96 202.2
Mounting Hole BCD
0.23
5.8
2.6
66.7
to 3.0 to 75.0
Extended
8.55 217.2
9.14 232.2 10.32 262.2 11.50 292.2
(in)
(mm)
0.23
5.8
Register Length
0.9
2.4
Register Dia. (J6)
2.36
60.0
Flange Square
2.76
70.0
Mounting Hole Dia.
0.23
5.8
Mounting Hole BCD
2.95
75.0
Motor Housing
2.95
75.0
Mounting Bolts
Front End Frame Type
Unbraked Length
Braked Length
Shaft Dimensions
14.0mm B-D Std.
0.23
0.28
7.0
3.0
to 3.2
5.8
75.0
to 80.0
Extended
3.4
85.0
Flat*
Frame Length
*Optional Flat Flange

Motor Dimensions
M5
11.0mm A Std.
For vertical
connectors,
allow
approximately
175.0mm
clearance for
mating cable
Optional key
19.0mm Max.
A
(in)
B
(mm)
(in)
C
(mm)
(in)
075D
(mm)
(in)
7.58 192.6
8.76 222.6
9.94 252.6 11.13 282.6
6.76 171.6
7.94 201.6
B2
5.57 141.6
A1
9.35 237.6 10.54 267.6 11.72 297.6 12.90 327.6
B2
7.35 186.6
8.53 216.6
9.12 231.6
9.71 246.6 10.89 276.6
0.9mm, 1.0mm
2
(in)
(mm)
(in)
(mm)
(in)
(mm)
Shaft Diameter (J6)
0.43
11.0
0.55
14.0
0.75
19.0
Shaft Length
D1
0.91
23.0
1.18
30.0
1.57
40.0
(in)
(mm)
Key Height
E2
0.49
12.5
0.63
16.0
0.85
21.5
4.7
118.5
Key Length
F3
0.55
14.0
0.87
22.0
1.26
32.0
5.0
126.0
Key-to-Shaft End
G4
0.14
3.6
0.14
3.6
0.14
3.6
5.0
126.0
Key Width (H9)
0.16
4.0
0.20
5.0
0.24
6.0
4.7
118.5
Tapped Hole
thread Size
Tapped Hole Depth
J5
M4 x 0.4
0.43
11.0
M5 x 0.8
0.53
13.5
(mm)
A1

Connector Type
M6 x 1.0
0.67
17.0
0.45mm, 2To IEC 72-1, 30.25mm, 41.1mm, 50.4mm
29

095E2
Voltage
230V
Frame Length
095U2
460V
20.4
38.1
52.2
66.4
79.7
20.4
38.1
52.2
66.4
79.7
2.3
4.3
5.9
7.5
9.0
2.3
4.3
5.9
7.5
9.0
61.1
114
157
199
239
61.1
114
157
199
239
6.9
12.9
17.7
22.5
27.0
6.9
12.9
17.7
22.5
27.0
92.0
172
235
299
358
92.0
172
235
299
358
10.4
19.4
26.6
33.8
40.5
10.4
19.4
26.6
33.8
40.5
0.00156
0.00256
0.00354
0.00451
0.00549
0.00159
0.00257
0.00354
0.00451
0.00549
0.00018
0.00029
0.00040
0.00051
0.00062
0.00018
0.00029
0.00040
0.00051
0.00062
0.00327
0.00425
0.00522
0.00620
0.00717
0.00327
0.00425
0.00522
0.00620
0.00717
High Inertia (kgm)
0.00037
0.00048
0.00059
0.00070
0.00081
0.00037
0.00048
0.00059
0.00070
0.00081
172
168
183
221
228
172
168
183
221
228
Motor Weight (lbs)
11.24
13.89
16.53
19.18
21.83
11.24
13.89
16.53
19.18
21.83
Motor Weight (kg)
5.1
6.3
7.5
8.7
9.9
5.1
6.3
7.5
8.7
9.9
12.4
21.2
Kt (Nm/A) =
1.40
2.40
Ke (V/krpm) =
85.50
147.0
19.5
35.4
48.8
61.1
72.6
19.5
35.4
48.7
61.1
72.6
Rated Torque (Nm)
2.2
4.0
5.5
6.9
8.2
2.2
4.0
5.5
6.9
8.2
Stall Current (A)
1.7
3.1
4.3
5.4
6.5
1.0
1.8
2.5
3.2
3.8
Rated Power (kW)
0.46
0.84
1.15
1.45
1.72
0.46
0.84
1.15
1.45
1.72
R (ph-ph) ()
20.69
6.24
3.16
2.31
1.71
64.00
17.00
9.90
6.00
4.30
L (ph-ph) (mH)
72.40
22.50
13.73
10.79
8.70
202
54.50
36.50
25.6
18.9
8.23
14.2
Kt (Nm/A) =
0.93
1.60
Ke (V/krpm) =
57.00
98.00
17.7
34.5
47.8
60.2
71.7
17.7
34.5
47.8
60.2
71.7
Rated Torque (Nm)
2.0
3.9
5.4
6.8
8.1
2.0
3.9
5.4
6.8
8.1
Stall Current (A)
2.5
4.7
6.4
8.1
9.7
1.5
2.7
3.7
4.7
5.7
Rated Power (kW)
0.63
1.23
1.7
2.14
2.54
0.63
1.23
1.7
2.14
2.54
R (ph-ph) ()
8.03
2.68
1.35
1.03
0.77
24.5
6.8
2.74
L (ph-ph) (mH)
22.04
8.70
6.10
4.48
3.99
57.90
24.30
15.50
13.62
8.50
6.37
Kt (Nm/A) =
0.72
10.62
1.20
Ke (V/krpm) =
44.00
73.50
15.9
26.6
35.4
43.4
50.4
15.9
26.6
35.4
43.4
50.4
Rated Torque (Nm)
1.8
3.0
4.0
4.9
5.7
1.8
3.0
4.0
4.9
5.7
Stall Current (A)
3.2
6.0
8.2
10.5
12.5
2.0
3.6
5.0
6.3
7.5
Rated Power (kW)
0.75
1.26
1.68
2.05
2.39
0.75
1.26
1.68
2.05
2.39
R (ph-ph) ()
5.15
1.64
0.92
0.62
0.43
12.70
4.08
2.10
1.50
1.03
L (ph-ph) (mH)
13.00
7.28
3.80
2.75
2.09
31.50
13.60
8.50
6.30
4.80
4.16
7.08
Kt (Nm/A) =
0.47
0.80
Ke (V/krpm) =
28.5
49.00
11.5
18.5
24.7
11.5
18.5
24.7
Rated Torque (Nm)
1.3
2.1
2.8
1.3
2.1
2.8
Stall Current (A)
4.9
9.2
12.6
2.9
5.4
7.4
Rated Power (kW)
0.82
1.32
1.76
0.82
1.32
1.76
R (ph-ph) ()
2.00
0.67
0.39
5.45
1.82
1.05
L (ph-ph) (mH)
5.51
2.58
1.70
14.10
6.00
3.80
NOTES:
30

D
F
G
C (j6)
H (h9)
4 holes R (H14)
equispaced on a
mounting BCD S
K Flange
P
Motor flange
Optional key
M (j6)
For vertical
connectors,
allow
N approximately
175.0mm
clearance for
mating cable
Tapped hole
thread size
I to depth J
T
Motor housing
Frame Length
A
Motor
Dimensions
Unbraked
Length
Braked Length
(in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm)
Optional Flange
Dimensions
115
098
(in)
(mm)
(in)
(mm)
8.93 226.9 10.11 256.9 11.30 286.9 12.48 316.9 13.66 346.9
Flange Thickness
.268
6.8
.268
6.8
6.93 175.9 8.11 205.9 9.29 235.9 10.47 265.9 11.65 295.9
Register Dia. (J6)
2.87
73.0
3.74
95.0
105.0
A 10.70 271.9 11.89 301.9 13.07 331.9 14.25 361.9 15.43 391.9
Flange Square
3.54
90.0
4.13
8.70 220.9 9.88 250.9 11.06 280.9 12.24 310.9 13.42 340.9
0.28
7.0
0.29
10.0
Mounting Hole BCD
3.88
98.43
4.53
115.0
(in)
(mm)
Flange Thickness
0.23
5.9
Register Length
0.11
2.8
Register Dia. (J6)
3.15
80.0
Flange Square
Mounting Hole
Dia. (H14)
Mounting
Hole BCD
Motor Housing
3.54
90.0
0.28
7.0
3.94
100.0
3.74
*Opt. Flat
Flange
Motor
Length Dim.
M6
14.0mm A Std.
Shaft Dimensions
19.0mm B-E Std.
22.0mm Max.
(in)
(mm)
(in)
(mm)
(in)
(mm)
Shaft Diameter (J6)
0.55
14.0
0.75
19.0
0.866
22.0
Shaft Length
D1
1.18
30.0
1.57
40.0
1.97
50.0
Key Height
0.63
16.0
0.85
21.5
1.0
24.5
Key Length
0.87
22.0
1.26
32.0
1.63
40.0
Key-to-Shaft End
G4
0.14
3.6
0.14
3.6
0.188
4.6
Key Width (H9)
0.20
5.0
0.24
6.0
0.245
6.0
Tapped Hole
thread Size
Tapped Hole Depth
I
J5
M5 x 0.8
0.53
13.5
M6 x 1.0
0.67
17.0
M8 x 1.25
0.816
M6
M8
Extended
Flat*
Mounting Bolts
95.0
Mounting Bolts
BCD Code
D
Frame Length
A
Unbraked
Length
A1 7.94 201.8 9.13 231.8 10.31 261.8 11.49 291.8 12.67 321.8
Braked
Length
A1 9.72 246.8 10.90 276.8 12.08 306.8 13.26 336.8 14.44 366.8
B2
B2
5.94 150.8 7.12 180.8 8.30 210.8 9.48 240.8 10.66 270.8
7.71 195.8 8.89 225.8 10.07 255.8 11.25 285.8 12.43 315.8
0.9mm, 21.0mm

Connector Type
(in)
(mm)
5.18
131.5
5.47
139.0
5.47
139.0
5.18
131.5
C
V
NEMA 34 flange option; shaft diameters differ from typical NEMA 34 flange
20.0
0.45mm, 2To IEC 72-1, 30.25mm, 41.1mm, 50.4mm
31

115E2
Voltage
230V
Frame Length
115U2
460V
31.0
58.4
83.2
110
135
31.0
58.4
83.2
110
135
15.3
3.5
6.6
9.4
12.4
15.3
3.5
6.6
9.4
12.4
92.9
175
250
329
406
92.9
175
250
329
406
10.5
19.8
28.2
37.2
45.9
10.5
19.8
28.2
37.2
45.9
124
234
333
439
542
124
234
333
439
542
14
26.4
37.6
49.6
61.2
14
26.4
37.6
49.6
61.2
0.00389
0.00593
0.00797
0.01009
0.01221
0.00389
0.00593
0.00797
0.01009
0.01221
0.00044
0.00067
0.00090
0.00114
0.00138
0.00044
0.00067
0.00090
0.00114
0.00138
0.00841
0.01044
0.01248
0.01469
0.01673
0.00841
0.01044
0.01248
0.01469
0.01673
High Inertia (kgm)
0.00095
0.00118
0.00141
0.00166
0.00189
0.00095
0.00118
0.00141
0.00166
0.00189
175
185
198
217
241
175
185
198
217
241
Motor Weight (lbs)
17.20
21.38
25.57
29.76
33.95
17.20
21.38
25.57
29.76
33.95
Motor Weight (kg)
7.8
9.7
11.6
13.5
15.4
7.8
9.7
11.6
13.5
15.4
124
12.4
21.2
Kt (Nm/A) =
1.4
2.40
Ke (V/krpm) =
85.5
147.00
28.3
54.0
77.0
95.6
124
28.3
54.0
77.0
95.6
Rated Torque (Nm)
3.2
6.1
8.7
10.8
14
3.2
6.1
8.7
10.8
14
Stall Current (A)
2.5
4.8
6.8
8.9
11
1.5
2.8
5.2
6.4
Rated Power (kW)
0.67
1.28
1.82
2.26
2.93
0.67
1.28
1.82
2.26
2.93
R (ph-ph) ()
8.33
2.82
1.51
0.99
0.72
27.8
8.55
4.55
2.96
2.17
L (ph-ph) (mH)
43.50
14.91
9.89
7.11
5.77
108
40.5
25.7
21.9
17.36
8.23
14.2
Kt (Nm/A) =
0.93
1.60
Ke (V/krpm) =
57.00
98.00
26.6
48.7
71.7
92.1
111.5
26.6
48.7
71.7
92.1
111
Rated Torque (Nm)
5.5
8.1
10.4
12.6
5.5
8.1
10.4
12.6
Stall Current (A)
3.8
7.1
10.2
13.4
16.5
2.2
4.2
5.9
7.8
9.6
Rated Power (kW)
0.94
1.73
2.54
3.27
3.96
0.94
1.73
2.54
3.27
3.96
3.7
1.3
0.73
0.47
0.37
12.6
3.86
2.02
1.4
1.08
15.94
7.23
4.82
3.37
3.49
49.3
21.57
13.27
8.6
10.96
77.0
R (ph-ph) ()
L (ph-ph) (mH)
6.37
10.6
Kt (Nm/A) =
0.72
1.20
Ke (V/krpm) =
44.00
73.50
22.1
41.6
55.8
66.4
22.1
41.6
55.8
66.4
Rated Torque (Nm)
2.5
4.7
6.3
7.5
2.5
4.7
6.3
7.5
8.7
Stall Current (A)
4.9
9.2
13.1
17.3
5.5
7.9
10.4
12.8
Rated Power (kW)
1.05
1.97
2.64
3.14
1.05
1.97
2.64
3.14
3.64
R (ph-ph) ()
2.07
0.70
0.44
0.29
6.42
2.14
1.16
0.73
0.57
L (ph-ph) (mH)
8.57
4.34
3.57
2.53
26.73
10.2
6.6
4.7
3.9
4.16
7.08
Kt (Nm/A) =
0.47
0.80
Ke (V/krpm) =
28.5
49.00
19.5
35.4
19.5
Rated Torque (Nm)
2.2
2.2
35.4
4
Stall Current (A)
7.5
14.1
4.4
8.3
Rated Power (kW)
1.38
2.51
1.38
2.51
R (ph-ph) ()
0.96
0.3
3.10
0.97
L (ph-ph) (mH)
3.43
2.09
12.3
4.81
NOTES:
32

B

C (j6/k6)
H (h9)
4 holes R (H14)
equispaced on a
mounting BCD S
K Flange
P
Motor flange
Optional key
For vertical
connectors,
allow
N approximately
175.0mm
clearance for
mating cable
M (j6)
Tapped hole
thread size
I to depth J
T
Motor housing
BCD Code
Optional Flange
Dimensions
Frame Length
A
Motor
Dimensions
Unbraked
Length
Braked Length
9.65 245.2 10.83 275.2 12.02 305.2 13.20 335.2 14.38 365.2
7.95 202.0 9.13 232.0 10.31 262.0 11.50 292.0 12.68 322.0
0.38
9.6
0.11
2.80
Register Dia. (J6)
3.74
95.0
Flange Square
Mounting Hole
Dia. (H14)
Mounting
Hole BCD
Motor Housing
4.13
105.0
0.39
10.0
4.53
115.0
4.53
115.0
Mounting Bolts
5.12
130.0
5.12
130.0
0.39
10.0
0.39
10.0
Mounting Hole BCD
5.12
130.0
22.0
0.94
24.0
1.10
28.0
1.26
32.0
D1 1.57
40.0
1.97
50.0
1.97
50.0
2.36
60.0
3.15
80.0
Key Height
0.85
21.5
0.96
24.5
1.06
27.0
1.22
31.0
1.38
35.0
Key Length
F3
1.26
32.0
1.57
40.0
1.57
40.0
1.97
50.0
2.76
70.0
Key-to-Shaft End
G4
0.14
3.6
0.18
4.6
0.18
4.6
0.18
4.6
0.18
4.6
Key Width (H9)
0.24
6.0
0.24
6.0
0.31
8.0
0.31
8.0
0.39
10.0
J5
M6 x 1.0
0.67
17.0
M8 x 1.25
0.79
20.0
M8 x 1.25
0.79
20.0
M10 x 1.5
0.91
23.0
Flat*
Frame Length
A
6.74 171.2 7.92 201.2 9.10 231.2 10.28 261.2 11.46 291.2
B2
8.51 216.2 9.69 246.2 10.87 276.2 12.06 306.2 13.24 336.2
B2
0.9mm, 21.0mm
0.87
M8
Flat
Braked
Length
19.0
28.0 Opt.
5.31 to 5.71 135.0 to 145.0
A1 10.21 259.4 11.39 289.4 12.57 319.4 13.76 349.4 14.94 379.4
0.75
Tapped Hole
Thread Size
Tapped Hole
Depth
110.0
Flange Square
A1 8.44 214.4 6.62 244.4 10.80 274.4 11.98 304.4 13.17 334.4
(in) (mm) (in) (mm)
Shaft Dimensions
Shaft Length
4.33
Unbraked
Length
19.0mm
22.0 Opt. 24.0 D-E Std.
A-C Std.
(in) (mm) (in) (mm) (in) (mm)
Shaft Dia. (J6)
110.0
*Opt. Flat
Flange
Motor
Length Dim.
M8
(mm)
4.33
(mm)
Register Length
(in)
Mounting Bolts
9.72 247.0 10.91 277.0 12.09 307.0 13.27 337.0 14.45 367.0
Flange Thickness
(mm)
A 11.43 290.2 12.61 320.2 13.79 350.2 14.97 380.2 16.15 410.2
B
145
(in)
Register Dia. (J6)
A
(in)
130
32.0 Max.

Connector Type
(in)
(mm)
5.87
149.0
6.16
156.5
6.16
156.5
5.87
149.0
C
V
M12 x 1.75
1.14
29.0
0.45mm, 2To IEC 72-1, 30.25mm, 41.1mm, 50.4mm
33

142E2
Voltage
230V
Frame Length
142U2
460V
50.5
95.6
135
175
207
50.5
95.6
135
175.
207
23.4
5.7
10.8
15.3
19.8
23.4
5.7
10.8
15.3
19.8
151
287
406
526
621
151
287
406
526
621
17.1
32.4
45.9
59.4
70.2
17.1
32.4
45.9
59.4
70.2
202
382
542
701
828
202
382
542
701
828
22.8
43.2
61.2
79.2
93.6
22.8
43.2
61.2
79.2
93.6
0.00797
0.01381
0.01965
0.02549
0.03133
0.00797
0.01381
0.01965
0.02549
0.03133
0.00090
0.00156
0.00222
0.00288
0.00354
0.00090
0.00156
0.00222
0.00288
0.00354
0.02062
0.02646
0.03231
0.03815
0.04399
0.02062
0.02646
0.03231
0.03815
0.04399
High Inertia (kgm)
0.00233
0.00299
0.00365
0.00431
0.00497
0.00233
0.00299
0.00365
0.00431
0.00497
213
217
275
301
365
213
217
275
301
365
Motor Weight (lbs)
22.05
29.32
35.49
41.67
47.84
22.05
29.32
35.49
41.67
47.84
Motor Weight (kg)
10
13.3
16.1
18.9
21.7
10
13.3
16.1
18.9
21.7
12.4
21.2
Kt (Nm/A) =
1.4
2.40
Ke (V/krpm) =
85.5
147.00
46.9
91.2
129
163
189
46.9
91.2
129
163
189
Rated Torque (Nm)
5.3
10.3
14.6
18.4
21.3
5.3
10.3
14.6
18.4
21.3
Stall Current (A)
4.1
7.8
11
14.2
16.8
2.4
4.5
6.4
8.3
9.8
Rated Power (kW)
1.11
2.16
3.06
3.85
4.46
1.11
2.16
3.06
3.85
4.46
R (ph-ph) ()
4.28
1.33
0.66
0.45
0.32
12
3.6
2.1
1.35
0.98
L (ph-ph) (mH)
26.74
11.53
7.31
5.55
4.4
83
35.9
18.7
13.6
10.7
159
8.23
14.2
Kt (Nm/A) =
0.93
1.60
Ke (V/krpm) =
57.00
98.00
43.4
79.7
108
140
43.4
79.7
108
140
Rated Torque (Nm)
4.9
12.2
15.8
4.9
12.2
15.8
18
Stall Current (A)
6.2
11.7
16.5
21.3
3.6
6.8
9.6
12.4
14.7
Rated Power (kW)
1.54
2.83
3.83
4.96
1.54
2.83
3.83
4.96
5.65
R (ph-ph) ()
1.9
0.59
0.31
0.22
5.3
1.72
0.94
0.61
0.42
11.87
5.12
3.35
3.32
37
13.3
8.3
6.1
7.21
L (ph-ph) (mH)
6.37
10.6
Kt (Nm/A) =
0.72
1.20
Ke (V/krpm) =
44.00
73.50
31.9
62.0
31.9
62.0
78.8
94.7
108
Rated Torque (Nm)
3.6
3.6
8.9
10.7
12.2
15
4.8
12.8
16.5
19.5
Rated Power (kW)
Stall Current (A)
1.51
2.93
1.51
2.93
3.73
4.48
5.11
R (ph-ph) ()
1.2
0.36
3.0
1.0
0.53
0.35
0.25
L (ph-ph) (mH)
9.45
4.08
21.0
7.50
5.67
3.60
3.25
4.16
7.08
Kt (Nm/A) =
0.47
0.080
Ke (V/krpm) =
28.5
49.00
25.7
25.7
39.8
Rated Torque (Nm)
2.9
2.9
4.5
Stall Current (A)
12.2
7.2
13.5
Rated Power (kW)
1.82
1.82
2.83
R (ph-ph) ()
0.49
1.33
0.46
L (ph-ph) (mH)
3.96
9.23
3.44
NOTES:
34

D
F
G
C (j6/k6)
H (h9)
4 holes R (H14)
equispaced on a
mounting BCD S
K Flange
L
For vertical
connectors,
allow
N approximately
175.0mm
clearance for
mating cable
P
Motor flange
Optional
key
M (j6)
Tapped hole
thread size
I to depth J
A
T
Motor housing
Frame Length
A
Motor
Dimensions
Unbraked
Length
Braked Length
BCD Code
D
149
(in)
(mm)
8.92 226.2 10.09 256.2 11.27 286.2 12.45 316.2 13.63 346.2
Flange Thickness
0.45
11.5
7.20 183.0 3.39 213.0 9.57 243.0 10.75 273.0 11.93 303.0
Register Dia. (J6)
4.50
114.3
140.0
A 10.68 271.2 11.86 301.2 13.04 331.2 14.22 361.2 15.40 391.2
Flange Square
5.51
8.98 228.0 10.16 258.0 11.34 288.0 12.52 318.0 13.70 348.0
0.47
12.0
Mounting Hole BCD
5.88
149.23
(in)
(mm)
Flange Thickness
0.46
11.6
Register Length
0.13
3.4
Register Dia. (J6)
5.12
130.0
Flange Square
Mounting Hole
Dia. (H14)
Mounting
Hole BCD
Motor Housing
5.59
142.0
0.47
12.0
6.50
165.0
5.59
142.0
Mounting Bolts
Mounting Bolts
Frame Length
Opt. Flange
Motor
Length Dim.
Shaft Dimensions
24.0 A-E Std.
28.0 Opt
(in)
(mm)
(in)
(mm)
(in)
(mm)
22.0
0.94
24.0
1.10
28.0
1.26
32.0
Shaft Length
D1
1.97
50.0
1.97
50.0
2.36
60.0
3.15
80.0
Key Height
E2
0.96
24.5
1.06
27.0
1.22
31.0
1.38
35.0
Key Length
F3
1.57
40.0
1.57
40.0
1.97
50.0
2.76
70.0
Key-to-Shaft End
G4
0.18
4.6
0.18
4.6
0.18
4.6
0.18
4.6
Tapped Hole Depth
J5
0.31
M8 x 1.25
0.79
8.0
M8 x 1.25
20.0
0.79
20.0
0.31
8.0
M10 x 1.5
0.91
0.39
9.06 230.2 10.24 260.2 11.43 290.2 12.61 320.2 13.79 350.2
B2
B2 10.83 275.2 12.02 305.2 13.20 335.2 14.38 365.2 15.56 395.2
0.9mm, 1.0mm
(mm)
6.0
32.0 Max.
(in)
0.24
Braked
Length
0.87
A1 12.54 318.4 13.72 348.4 15.44 378.4 16.08 408.4 17.26 438.4
Tapped Hole
Thread Size
A1 10.76 273.4 11.94 303.4 13.13 333.4 14.31 363.4 15.49 393.4
Shaft Dia. (J6)
Key Width (H9)
Unbraked
Length
M10
22.0 Opt.
M10
Extended
Optional Flange
Dimensions
10.0

Connector Type
(in)
(mm)
6.93
176.0
7.22
183.5
7.22
183.5
6.93
176.0
C
V
NEMA 56 flange option; shaft diameter 0.945in (24mm)
M12 x 1.75
23.0
1.14
29.0
0.45mm, To IEC 72-1, 0.25mm, 1.1mm, 0.4mm

2
35
Unimotor FM 230V 190mm Frame Ratings

190E2
Voltage
Frame Length
230V
B
193
364
520
648
21.8
41.1
58.7
73.2
579
1089
1558
1938

65.4
123
176
219
0.04310
0.07647
0.10894
0.14319
0.00487
0.00864
0.01231
0.01618
0.08312
0.11648
0.14896
0.18321
High Inertia (kgm)
0.00939
0.01316
0.01683
0.02070
240
242
319
632
Motor Weight (lbs)
55.78
74.74
93.70
113.10
Motor Weight (kg)
25.3
33.9
42.5
51.3
12.39
Kt (Nm/A) =
1.4
Ke (V/krpm) =
85.50
177
327
446
Rated Torque (Nm)
20
36.9
50.4
Stall Current (A)
15.6
29.4
42
Rated Power (kW)
4.19
7.73
10.6
R (ph-ph) ()
0.5
0.15
0.1
L (ph-ph) (mH)
7.77
2.5
2.73
8.23
Kt (Nm/A) =
.93
Ke (V/krpm) =
Rated Torque (Nm)
57
169
19.2
292
33
Stall Current (A)
23.5
44.2
Rated Power (kW)
6.03
10.4
R (ph-ph) ()
0.17
0.06
L (ph-ph) (mH)
2.62
1.26
NOTES:
Stall torque, rated torque and power relate to maximum continuous operation tested in a 68 F (20 C) ambient
at 12kHz drive switching frequency
Control Techniques has an ongoing process of development and reserves the right to change the specification
without notice
All other figures relate to a 68 F (20 C) motor temperature; maximum intermittent winding temperature is 284
F (140 C)
36
Unimotor FM 230V 190mm Frame Dimensions

B

90 connectors are standard G
C (k6)
H (h9)
4 holes R (H14)
equispaced on a
mounting BCD S
K Flange
L
P
Motor flange
Optional
key
N
M (j6)
Tapped hole
thread size
I to depth J
For vertical
connectors,
allow
approximately
300.0mm
clearance for
mating cable
T
Motor housing
Frame Length
A
Motor
Dimensions
Unbraked Length
Braked Length
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
9.35
237.4
10.41
264.3
11.47
291.3
12.53
318.2
13.59
345.2
14.65
372.1
15.71
399.1
16.77
426.0
7.8
198.2
8.86
225.1
9.93
252.1
10.98
279.0
12.05
306.0
13.11
332.9
14.17
359.9
15.23
386.8
(mm)
12.53
318.2
13.59
345.2
14.65
372.1
15.71
399.1
16.77
426.0
17.83
453.0
18.89
479.9
19.96
506.9
10.98
279.0
12.05
306.0
13.11
332.9
14.17
359.9
15.23
386.8
16.29
413.8
17.35
440.7
18.41
467.7
(in)
(mm)
Flange Thickness
0.59
15.0
Register Length
0.15
3.9
Register Dia. (J6)
7.09
180.0
190.0
Flange Square
7.48
.057
14.5
Mounting Hole BCD
8.46
215.0
Motor Housing
7.48
190.0
Mounting Bolts
M12
28.0 Opt.
Shaft Dimensions
(in)
32.0 A-H Std.
38.0 Opt
42.0 Max.
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
Shaft Dia. (J6)
1.10
28.0
1.26
32.0
1.50
38.0
1.65
42.0
Shaft Length
D1
2.36
60.0
3.15
80.0
3.15
80.0
4.33
110.0
Key Height
1.22
31.0
1.38
35.0
1.61
41.0
1.77
45.0
Key Length
F3
1.97
50.0
2.76
70.0
2.76
70.0
3.94
100.0
Key-to-Shaft End
0.18
4.6
0.18
4.6
0.18
4.6
0.18
4.6
0.31
8.0
0.39
10.0
0.39
10.0
0.47
12.0
Key Width (H9)
Tapped Hole Depth
J5
M10 x 1.5
0.91
23.0
M12 x 1.75
1.14
29.0
M12 x 1.75
1.14
29.0

Connector Type
(in)
(mm)
9.65
245.0
9.94
252.5
9.94
252.5
9.13
232.0
C
V
M16 x 2.0
1.46
37.0
0.45mm, To IEC 72-1, 0.25mm, 41.1mm, 50.4mm

2
37
Unimotor FM 460V 190mm Frame Ratings

190U2
Voltage
Frame Length
460V
A
85.0
193
275
364
448
520
584
648
9.6
21.8
31.1
41.1
50.6
58.7
66
73.2
255
579
826
1089
1342
1558
1752
1938

28.8
65.4
93.3
123
151.6
176
198
219
0.02646
0.04310
0.05974
0.07647
0.09293
0.10895
0.12648
0.14320
0.00299
0.00487
0.00675
0.00864
0.01050
0.01231
0.01429
0.01618
0.06647
0.08311
0.09975
0.11648
0.13294
0.14896
0.16648
0.18321
High Inertia (kgm)
0.00751
0.00939
0.01127
0.01316
0.01502
0.01683
0.01881
0.02070
217
240
241
242
281
319
476
632
Motor Weight (lbs)
46.30
55.78
65.26
74.74
84.22
93.70
103.18
113.10
Motor Weight (kg)
21
25.3
29.6
33.9
38.2
42.5
46.8
51.3
21.24
Kt (Nm/A) =
2.40
Ke (V/krpm) =
147.00
82.3
177
251
326
387
446
469
484
Rated Torque (Nm)
9.3
20
28.4
36.9
43.8
50.4
53
54.7
30.5
9.1
13
17.2
21.1
24.5
27.5
Rated Power (kW)
Stall Current (A)
1.9
4.19
5.9
7.73
9.2
10.6
11.1
11.5
R (ph-ph) ()
6.15
1.54
0.83
0.5
0.39
0.3
0.3
0.17
L (ph-ph) (mH)
52.9
23.55
15
8.81
8.68
7.16
6.73
4.63
319
36
326
36.8
14.16
Kt (Nm/A) =
1.60
Ke (V/krpm) =
Rated Torque (Nm)
98.00
Stall Current (A)
77.0
8.7
170
19.2
221
25
292
33
301
34
310
35
13.7
19.4
25.7
31.6
36.7
41.3
45.8
Rated Power (kW)
2.73
6.03
7.85
10.4
10.7
11
11.3
11.6
R (ph-ph) ()
2.73
0.7
0.41
0.22
0.17
0.14
0.13
0.09
L (ph-ph) (mH)
23.5
10.47
7.35
4.89
3.86
3.6
2.99
2.46
257
10.62
Kt (Nm/A) =
1.20
Ke (V/krpm) =
73.50
62.0
155
190
Rated Torque (Nm)
17.5
21.5
29
Stall Current (A)
18.2
25.9
34.2
Rated Power (kW)
2.9
7.3
12.1
R (ph-ph) ()
1.35
0.38
0.21
0.11
L (ph-ph) (mH)
13.21
6.05
3.75
2.4
NOTES:
38
Unimotor FM 460V 190mm Frame Dimensions

B

90 connectors are standard G
C (k6)
H (h9)
4 holes R (H14)
equispaced on a
mounting BCD S
K Flange
L
P
Motor flange
Optional
key
N
M (j6)
Tapped hole
thread size
I to depth J
For vertical
connectors,
allow
approximately
300.0mm
clearance for
mating cable
T
Motor housing
Frame Length
A
Motor
Dimensions
Unbraked Length
Braked Length
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
9.35
237.4
10.41
264.3
11.47
291.3
12.53
318.2
13.59
345.2
14.65
372.1
15.71
399.1
16.77
426.0
7.8
198.2
8.86
225.1
9.93
252.1
10.98
279.0
12.05
306.0
13.11
332.9
14.17
359.9
15.23
386.8
(mm)
12.53
318.2
13.59
345.2
14.65
372.1
15.71
399.1
16.77
426.0
17.83
453.0
18.89
479.9
19.96
506.9
10.98
279.0
12.05
306.0
13.11
332.9
14.17
359.9
15.23
386.8
16.29
413.8
17.35
440.7
18.41
467.7
(in)
(mm)
Flange Thickness
0.59
15.0
Register Length
0.15
3.9
Register Dia. (J6)
7.09
180.0
190.0
Flange Square
7.48
.057
14.5
Mounting Hole BCD
8.46
215.0
Motor Housing
7.48
190.0
Mounting Bolts
M12
28.0 Opt.
Shaft Dimensions
(in)
32.0 A-H Std.
38.0 Opt
42.0 Max.
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
Shaft Dia. (J6)
1.10
28.0
1.26
32.0
1.50
38.0
1.65
42.0
Shaft Length
D1
2.36
60.0
3.15
80.0
3.15
80.0
4.33
110.0
Key Height
1.22
31.0
1.38
35.0
1.61
41.0
1.77
45.0
Key Length
F3
1.97
50.0
2.76
70.0
2.76
70.0
3.94
100.0
Key-to-Shaft End
0.18
4.6
0.18
4.6
0.18
4.6
0.18
4.6
0.31
8.0
0.39
10.0
0.39
10.0
0.47
12.0
Key Width (H9)
Tapped Hole Depth
J5
M10 x 1.5
0.91
23.0
M12 x 1.75
1.14
29.0
M12 x 1.75
1.14
29.0

Connector Type
(in)
(mm)
9.65
245.0
9.94
252.5
9.94
252.5
9.13
232.0
C
V
M16 x 2.0
1.46
37.0
0.45mm, To IEC 72-1, 0.25mm, 41.1mm, 50.4mm

2
39
Unimotor FM Motor Selection Considerations

Feedback
Feedback Device
Order Code
Feedback Type
Encoder Supply
Voltage
AR
Resolver
7V
Excitation 5kHz
Incremental Encoder
5V
Inductive
Absolute Encoder EnDat 2.1
5V
16
SinCos Optical Encoder

Hiperface
7 - 12V
128
AE
Resolver
6 Vrms
Excitation 6kHz
CA
Incremental Encoder
5V
4096
EC (Multi-turn)
Inductive Absolute Encoder

EnDat 2.1
7 - 10V
32
SinCos Cycles or Incremental

Pulses per Revolution
055 motors
Resolution Available to
Position Loop&
1
1024
KR
MR
CR
EM (Multi-turn)
FM (Single-turn)
TL (Multi-turn)
UL (Single-turn)
2048
4096
Feedback Accuracy1
Medium
16384 (14 bit)
Medium
4096 (12 bit)
8192 (13 bit)
16384 (14 bit)
High
2.62x105 (18 bits)
High
4096
1.31x105 (17 bit)
Low
+/- 600"
Medium
Medium
16384 (14 bit)
Medium
16384 (14 bit)
Medium
Absolute position
524288
(19 bits)
Very high
1.04x106
Medium
+/- 720"
High
+/- 60"
Medium
+/- 150"
Medium
+/- 480"
High
+/- 52"
075-190 motors
FC (Single-turn)
RA (Multi-turn)
SinCos Optical Encoder
Hiperface
7 - 12V
Optical Absolute Encoder

EnDat 2.2
3.6 - 14V
SA (Single-turn)
EB (Multi-turn)
FB (Single-turn)
+/- 280"
High
For SinCos Integral non-linearity
+/- 45" For SinCos Differential
non-linearity +/- 7"
(Total accuracy+/-52")
Very High
1024
(20 bits)
Very High
2.08x106
2048
+/-20" (Differential non linearity

+/- 1% signal period)
(21 bits)
Notes:
1) The output from the resolver is an analog output; the resolution is determined by the analog to digital converter used; the value shown is when the resolver is used in conjunction with the SM-Resolver
2) The sin and cosine outputs from the SinCos optical encoders are analog outputs; with Unidrive SP and Digitax ST the resolutions quoted above are when the encoder type is set to either SC Endat or SC Hiperface depending on
the encoder
3) The information is supplied by the feedback device manufacturer and relates to it as a standalone device; the values may change when mounted into the motor and connected to a drive
Unimotor FM Peak Torque Information

Unimotor FM has two levels of peak torque available within
the range standard peak torque (code 2) and the high
peak torque range (code P). On some frame sizes, full peak
torque cannot be achieved at the full 100% rms current level.
As shown below, the 055 and 075 motors are not affected
by the reduced levels and remain constant up to 100% rms
current, whereas the 095 to 190 motors all show a drop at
some point along the % rms current line. The graph below
shows the standard peak factor for each frame size.
Standard (2) Peak Torque
High (P) Peak Torque
As shown below, the 075 increases to 5 times, the 095

increases to 4.5 times, the 115 increases to 4 times across
the % rms current line and the 142 shows an increase to 4
times up to 57% rms current dropping to 2.5 times at 100%.
5.5
4.0
5.0
A
4.5
3.0
2.0
1.5
B
1.0
0.5
0
4.0
2.5
Peak Factor (xSC)
Peak Factor (xSC)
3.5
3.5
3.0
2.5
B
2.0
1.5
1.0
20
055
075
40
60
% RMS Current
095
80
115
142
100
190
0.5
0
0
20
40
60
% RMS Current
075
40
095
115
80
142
100
Unimotor FM Motor Selection Considerations

Motor Selection
Motor Derating
must be derated using the following formula as a guideline
(only applies to motors up to 3000rpm and assumes copper
losses dominate).
Thermal Isolator
Plate
Shaft
Motor
New derated torque =

Specified torque x 1 - ([ambient temperature* 40] / 100)
Dynometer
*Measured in C
For example, with an ambient temperature of 169 F (76 C),

the new derated torque will be 0.8 x specified torque.

Motor Type/Frame
(in)
See the table below for motor derating factors (these figures
are for guidance only).
(mm)
055
4.3 x 4.3 x 1.06
110 x 110 x 27
075-095
9.8 x 9.8 x 0.6
250 x 250 x 15
115-142
13.8 x 13.8 x 0.8
350 x 350 x 20
190
19.7 x 19.7 x 0.8
500 x 500 x 20
Motor Derating Factors

Motor Type/Frame
Switching
Frequency
055
A-C
075
A-D
095
A-E
A-C
115
D-E
A-C
142
D-E
A-B
190
3kHz
0.92
0.93
0.88
0.89
0.84
0.87
0.81
0.98
N/A
4kHz
0.93
0.94
0.91
0.91
0.87
0.91
0.86
0.99
0.55
5/6kHz
0.95
0.95
0.93
0.93
0.90
0.94
0.89
0.99
0.77
8kHz
0.96
0.98
0.97
0.97
0.95
0.97
0.96
0.90
10/12/16kHz
C-H
230V and 460V FM Motor Holding Brake Specifications

Static Torque
Mechanical
Engagement
Time
Added Inertia
Power Supply
(Vdc)
Current (A)
(lb-in)
(Nm)
(ms)
(lb-in-sec2)
( kgcm2)
Added Weight (kg)
55
24
0.27
15.9
1.8
24
0.00003
0.03
0.4
75
24
0.27
17.7
24
0.00006
0.07
0.5
95
24
0.67
97.3
11
20
0.00035
0.39
0.6
115
24
0.67
97.3
11
10
0.00039
0.44
1.2
142
24
0.81
159
18
30
0.00048
0.54
1.7
190(A-D)
24
1.05
336
38
15
0.00272
3.07
190(E-H)
24
1.05
531
60
15
0.00438
4.95
41
Cables for Servo Motors

Servo Motor Cables
Cables are a vital part of a servo motor installation. Using Control Techniques
comprehensive range of high quality cables and connector options, installers
can avoid the time and risks involved in manufacturing custom assemblies.
The matched power and feedback cables provide rapid worry- free
installation. Control Techniques servo motor-to-drive cables meet
EMC standards to ensure a system free from unwanted noise and
interference.
Each power cable has drive
terminations that make it
convenient to connect to
the specific drive used.
Cables are available for
braked and unbraked motors
and in standard or flexible duty
formats.
Cable Selection Guide

Cable Type
Servo Motors
Unimotor
hd/fm
NT
PS
PB
Power
Servo Drives
Digitax ST
Unidrive SP
Epsilon EP
MDS
(130 frame)
UF
CF
CM
XT
XCM
XV
Feedback
SI
SR
SS
XU
XCF
NOTE:
Flex duty cables are indicated by a
42
Cable Selection Unimotor HD, Unimotor FM, NT (-EOxS)

Power Cables
PS
Cable Type
PS = Power (standard)
015
Jacket
Phase and Ground

Conductor Size*
Connection Details Drive End
Connection Details Motor End
Cable Length
B = PUR
PB Power (with brake)
G = 1.5mm 16A
All DST, All EP
C = Extension power connector, 6-way
A = 2.5mm 22A
SP up to 22A
F = Digitax ST and Unidrive SP (Size 0) Unidrive

B = 190 FM power connector
SP (Size 1-2)
B = 4.0mm 30A
SP up to 30A
G = Unidrive SP (Size 3)
C = 6.0mm 39A
SP up to 39A
D = 10.0mm 53A
SP up to 53A
A = 055 142 FM,HD, NT(-ExxS)

power connector
Min=001 (meters)
Max =100 (meters)
Standard Cable Lengths
003 (meters)
X = Cut end
005 (meters)
J = Unidrive SP (Size 4)
010 (meters)
015 (meters)
K = Epsilon EP, EN, MDS
NOTES:
* Phase and ground connector note: Select CONDUCTOR SIZE
according to motor's STALL CURRENT
Ratings are for individual cables (not lashed together) in free air
temperature up to 104 F (40 C) make allowances as appropriate
X = Cut end
E = 16.0mm 70A
SP up to 70A
Select one of the following cables based on braked or unbraked configuration

PSB_F_
Unbraked
PSB_G_, PSB_J_
Unbraked
Unimotor HD
PBB_G_
Braked
PBB_G_,PBB_J_
NT motor (-ExxS only)
BRM-1**
PSBGKA_
USP
DST
Unbraked
J8
Epsilon EP
reset
L1
L2
PE
log ic
motor
seria l (J2)
ether net ( J4 )
act link
3 MIN
Braked
EP204-IDN-EN00
9606XX-XX A1
SN 0610E014
J5 J10
Unimotor FM
= Flex cable
digital i/o (J3)
PBBGKA_
+
_
EP204-P00-0000
9606XX-XX A1
SN 0610E014
J6
EP202-EP216
BRM-1**
**External power supply and control relay required for motor brake
FM, HD, NT (-EOxS) Motor Power Cables

Part Number
Standard Lengths (m)
PSB_F_
005, 010, 015, 020, 025, 030
Description Power Cable* Unbraked

Digitax ST, Unidrive SP (size 0, 1 and 2) motor power with ferrules (ring lugs on ground), flex rated
PSB_G_
005, 010, 015, 020, 025, 030
Unidrive SP (size 3) motor power with ring lugs, flex rated
PSB_J_
005, 010, 015, 020, 025, 030
Unidrive SP (size 4) motor power with ring lugs, flex rated
PSBGKA
005, 010, 015, 020, 025, 030
Part Number
Epsilon EP202 to EP216 motor power with ferrules, flex rated
Description Power Cable* Braked
PBB_F_
005, 010, 015, 020, 025, 030
Digitax ST, Unidrive SP (size 0, 1 and 2) motor power with ferrules (ring lugs on ground), flex rated
PBB_G_
005, 010, 015, 020, 025, 030
Unidrive SP (size 3) motor power with brake leads with ring lugs, flex rated
PBB_J_
005, 010, 015, 020, 025, 030
Unidrive SP (size 4) motor power with brake leads with ring lugs, flex rated
PBBGKA
005, 010, 015, 020, 025, 030
Epsilon EP202 to EP216 motor power with brake leads with ferrules, flex rated
BRM-1
Brake module, DIN rail mount
NOTE:
*Custom lengths available in 2m increments
43
Cable Selection Unimotor HD, Unimotor FM, NT (-ExxS)

Power Extension Cable Options: Motor to SP/DST/EP
Select Drive Cable (see previous page)
7579179
Power Extension Cable
Unimotor HD
(optional)
J8
Epsilon EP
reset
L1
L2
PE
Connector Kit
log ic
Cable
motor
seria l (J2)
ether net ( J4 )
act link
S
T
+
_
3 MIN
digital i/o (J3)
EP204-P00-0000
9606XX-XX A1
SN 0610E014
EP204-IDN-EN00
9606XX-XX A1
SN 0610E014
J5 J10
Unimotor FM
USP
= Flex cable
Part Number
IM/0039/KI
Description Connector Kits (includes brake pins)

Power connector kit, female 055 to 142 frame (30A)
IM/0044/KI
Power connector kit, female 055 to 142 frame (39A)
IM/0053/KI
Power connector kit, female 190 frame up to (53A)
IM/0054/KI
Power connector kit, female 190 frame up to (70A)
7579179
Part Number
Bulkhead flange kit for power connector size 1.5
Description Power Extension Cable*
PSB_CA
005, 010, 015, 020, 025, 030
PBB_CA
005, 010, 015, 020, 025, 030
Motor power extension, flex rated, 055 to 142 frames and NT (-EOxS)
Motor power extension w/brake leads, flex rated , 055 to 142 frames and NT (-EOxS)
PSB_CB
005, 010, 015, 020, 025, 030
Motor power, extension flex rated, 190 frame
PBB_CB
005, 010, 015, 020, 025, 030
Motor power extension w/brake leads, flex rated, 190 frame
Part Number
Description Cable
Undressed cable is available using cut-end order code option (example PSBAXX )
NOTES:
Fill in blank with appropriate conductor size
Conductor Size
G = 1.5mm (16A)
2
Drive
All Digitax ST, All Epsilon EP, MD-404, MD407, MD410
A = 2.5mm2 (22A)
Unidrive SP up to 22A, MD-420
B = 4.0mm2 (30A)
Unidrive SP up to 30A
C = 6.0mm2 (39A)
Unidrive SP up to 39A, MD-434
D = 10.0mm2 (53A)
E = 16.0mm2 (70A)
44
DST
EP
J6

Feedback cables
SI
015
Cable Type
Jacket
Special Options
Connection Details Drive End
Connection Details Motor End
Cable Length
SI = Incremental encoder
hyperboloid pins
B = PUR
A = Standard cable
A = Digitax ST/Unidrive SP/Epsilon EP incremental

encoder 15-pin connector
E = Twisted screened
B = Resolver/SinCos encoder ferrules
SS cable option only
SR = Resolver
SS = SinCos encoder
A = Incremental encoder connector
Min = 001 (meters)
B = Resolver connector
Max = 100 (meters)
F = MDS incremental encoder 26-pin connector
C = SinCos connector (Hiperface)

(SICK Stegmann)
I = Extension connector male pins
E = 17-way extension connector
H = Digitax ST/Unidrive SP SinCos, 15-pin connector
N = SinCos connector (EnDat)

(Heidenhain)
X = Cut end
X = Cut end
Feedback Cable Options Motor to SP/DST/EP Incremental Encoders

SIBAAA
7579160
SIBAIA
Unimotor HD
(optional)
IM/0063/KI
SIBAXA
J8
Epsilon EP
reset
L1
L2
PE
log ic
motor
seria l (J2)
IM/0022/KI
S
T
+
_
3 MIN
EP204-P00-0000
9606XX-XX A1
SN 0610E014
SIBAXX
digital i/o (J3)
NT motor (EONS)
ether net ( J4 )
act link
EP204-IDN-EN00
9606XX-XX A1
SN 0610E014
J5 J10
USP
DST
J6
EP
SIBAAX
Unimotor FM
Part Number
= Flex cable
Description Feedback Cables* and Connectors
SIBAAA
005, 010, 015, 020, 025, 030 Incremental encoder feedback, connectors both ends, drive and motor connection, flex duty
SIBAIA
005, 010, 015, 020, 025, 030 Extension cable, Incremental encoder feedback, connectors both ends, connects to SIBAAA cable and motor connector, flex duty
SIBAAX
005, 010, 015, 020, 025, 030 Incremental encoder feedback, connector on drive end, flex duty
SIBAXA
005, 010, 015, 020, 025, 030 Incremental encoder feedback, connector on motor end, flex duty
SIBAXX
2-meter increments
IM/0022/KI
Incremental encoder feedback cable, no connectors,flex duty
IM/0063/KI
Feedback connector kit, includes pins, drive end, 15-pin
7579160
Optional feedback connector flange kit for bulkhead, size 1.0 connector
Part Number
STI-ENC
Epsilon EP drive encoder breakout PCB, push-in terminals
SM-ECT
Unidrive SP, Digitax ST drives encoder breakout PCB, screw terminals
Feedback connector kit, incremental encoders, 055 frame
Description Encoder Breakout Board
NOTE:
45

Feedback Cable Options Motor to SP/DST Absolute and Resolver Feedback
SSBAHC (Sick/Stegmann SinCos)
SSBAHN (Heidenhain SinCos)
7579160
Feedback Extension Cable
Unimotor HD
SRBABB (Resolver Cable*)

(optional)
SSBABC (Sick/Stegmann SinCos)
NT motor (EORS, EOAS)

IM/0022/KI
IM/0023/KI
Cable
IM/0063/KI
= Flex cable
USP
Unimotor FM
Part Number
Description Feedback Cables*
SSBABC
005, 010, 015, 020, 025, 030 Sick/Stegmann (Hiperface) SinCos encoder feedback cable, 12-pin on encoder end, flying leads on drive end, flex duty
SSBAHC
005, 010, 015, 020, 025, 030 Sick/Stegmann (Hiperface) SinCos encoder feedback cable, 12-pin on encoder end, 15-pin d-sub on drive end, flex duty
SSBAHN
005, 010, 015, 020, 025, 030

Heidenhain (EnDat) SinCos encoder feedback cable, 12-pin on encoder end, 15-pin d-sub on drive end, flex duty
(30m max.)
SSBEHN
005, 010, 015, 020, 025, 030

Heidenhain (EnDat) SinCos encoder feedback cable, noise immune, 12-pin on encoder end, 15-pin d-sub on drive end, flex duty
(100m max.)
Part Number
IM/0022/KI
Feedback connector kit, Heidenhain SinCos encoders 055 frame
IM/0023/KI
Feedback connector kit, Sick/Stegmann SinCos encoders or resolver 055 frame
IM/0063/KI
Feedback connector kit, includes pins, drive end, 15-pin
7579160
Optional feedback connector flange kit for bulkhead; size 1.0 connector
Part Number
SSBAIC
005, 010, 015
Feedback extension cable for feedback options TL, UL, RA, SA (SICK SinCos Hiperface), flex duty
005, 010, 015
Feedback extension cable for feedback options EM, FM, EC, EB, FB ( -EOAS[NT] Heidenhain SinCos EnDat) flex duty
SSBAIN
SRBAIB
Part Number
SRBAXX
SSBAXX
Description Feedback Cable Connectors
Description Feedback Extension Cables*
005, 010, 015, 020, 025, 030 Feedback extension cable for feedback options AR, AE, -EORS(NT) (resolver) flex duty
Description Cable
2-meter increments
Cable for resolver feedback, no connectors, flex duty
2-meter increments
Cable for SinCos feedback, no connectors, flex duty, must specify SICK or Heidenhain cable types with order
Part Number
STI-ENC
SM-ECT
Description Encoder Breakout Board
NOTE:
46
DST
*= For use with SM-RESOLVER
Cable Selection Unimotor HD, Unimotor FM, NT Motor (-EOxS)

Maximum Cable Lengths
Power PUR Basic Cable Diameters

Overall Cable Diameter
Phase and Conductor Size (Current Rating Cenlec En60204.1)
No Brake
Maximum Cable Length (Meters)
Cable Types
Braked
Cable Code
PxBG
(mm2)
(in)
(mm)
(in)
(mm)
G - 1.5 (16A)
0.334
8.5
0.425
10.8
PxBA
A - 2.5 (22A)
0.394
10.0
0.496
12.6
PxBB
B - 4.0 (30A)
0.461
11.7
0.555
14.1
PxBC
C - 6.0 (39A)
0.685
17.4
0.685
17.4
Resolver
SIBA incremental
Sick Stegmann
Heidenhain
CA/CR 50m*
SRBA Resolver
AR/AE 100m
SSBA SinCos
EC/FC 20m
EB/FB 30m
RA/SA 100m
EC/FC 20m
EB/FB 100m
SSBE SinCos, twisted pair
NOTES:
Minimum bend radius = 10x dia. long chain, 7.5x dia. short chain
Bending life 10,000,000 cycles
Maximum acceleration = 65.6ft/s2 (20m/s2)
Temperature rating = 14 to 176 F (-10 to 80 C)
NOTES:
*328ft. (100m) only if +5V tolerance can be maintained @ 10%
Feedback PUR Basic Cable Diameters

Overall Cable Diameter
Cable Code
SIBA
(in)
(mm)
0.429
10.9
SRBA/SSBA
0.378
9.6
NOTES:
Minimum bend radius = 10x dia. long chain, 7.5x dia. short chain
Bending life 10,000,000 cycles
Maximum acceleration: SRBA/SSBA = 65.6ft/s2 (20m/s2)
SIBA/SIBL = 32.8ft/s2 (10m/s2)
Temperature rating = 14 to 176 F (-10 to 80C)
Power Plugs
Motor Connector Details

Power Plug
Feedback Plug
Function
Function
Pin
055-115
[with Brake]
190
[with Brake]
Phase U (R)
Phase U (R)
Thermistor
Thermistor
Excitation high
REF cos
Phase V (S)
Phase V (S)
Thermistor
Thermistor
Excitation low
+Data
Screen (optical encoder only)
EnDat Heidenhain
SinCos, Absolute Encoders
(EM, FM, EC, FC, EB, FB)
Resolver
(AR, AE)
Hyperface SICK Stegmann

SinCos, Absolute Encoders
(RA, SA, TL, UL)
Ground
Cos high
-Data
Phase W (T)
Phase W (T)
Cos low
+Cos
[Brake]
[Brake (+)]
U/
Sin high
+Sin
[Brake]
[Brake (-)]
Sin low
REF sin
V/
Thermistor
Thermistor
+ Clock
W/
- Clock
Screen
10
+ Cos
0 Volts
11
+ Data
12
Z/
- Data
13
A/
- Cos
14
+ Sin
15
B/
- Sin
16
+ Volts
+V
0 Volts
0 Volts
Shield
Shield
17
Shell
Shield
Thermistor
+
u
Incremental
Encoder
(CR,CA, MA,MR,
KR, KA)
Ground (
3
2
6
1
Feedback Plugs
11
10
9
12
16
15
Thermistor
13
17
14
4
8
7
(Incremental, Heidenhain
encoders)
+ Volts
8
9
1
12
7
6
10
2
11
3
4
Shield
(Resolver, Sick/Stegmann
encoders)
47
Cable Selection NT Motors to Drives

Power Cable Options: Motor to SP/DST/EP
CMDS or CMMS or CMLS
CMDF or CMMF or CMLF
CMDEF or CMMEF
PTB-16-8
CMDCS or CMDCF
J8
Epsilon EP
2," 3,"
4," 6,"
8"
4X16SF
4X12SF
4X08SF
R
motor
PT06A-16-8SSR
MS3106A-20-15PWSF
MS3106A-24-10PWSF
L2
PE
seria l (J2)
4X16SS
4X12SS
4X08SS
L1
log ic
2," 3,"
4," 6,"
8"
act link
ether net ( J4 )
PT06A-16-8SSR
MS3106A-20-15SSR
MS3106A-24-10S
reset
S
T
+
_
3 MIN
EP204-P00-0000
9606XX-XX A1
SN 0610E014
digital i/o (J3)
NT Motors
EP204-IDN-EN00
9606XX-XX A1
SN 0610E014
J5 J10
PTB-8-3
USP
DST
J6
EPP
CBMS or CBMF
CBMCS
Brake connection
Part Number
= Flex cable
BRM-1
Standard Lengths (ft) Description Power Cables and Connectors
CMDS
-005, -015, -025, -050, -100 Molded cable,16 AWG for 2" and 3" motors: connector on motor end, ferrules on drive end; IP-65 shielded connector
CMMS
-005, -015, -025, -050, -100 Molded cable, 12 AWG for 4" and 6" motors, connector on motor end, ferrules on drive end; IP-65 shielded connector
CMLS
-005, -015, -025, -050, -100 Molded cable, 8 AWG for 8" motors, connector on motor end, ferrules on drive end; IP-65 shielded connector
CMDCS*
CMDF
-005, -015, -025
Molded flex cable, connector at motor end for 2" and 3" motors; min. bend radius 5.6"
Molded cable, connects to bulkhead on one end, motor connector on the other end for 2" and 3" motors
CMMF
-005, -015, -025
Molded flex cable, connectors at both ends for 4" and 6" motors; min. bend radius 9.0" flexing, 6" stationary
CMLF
-005, -015, -025
Molded flex cable, connector at motor end for 8" motors; min. bend radius 9" flexing, 6" for stationary
CMDEF
-005, -015, -025
Molded flex extension cable, connectors at both ends for 2" and 3" motors; min. bend radius 5.6"
CMMEF
-005, -015, -025
CMDCF*
Molded flex cable, connectors at both ends for 4" and 6" motors; min. bend radius 9.0" flexing, 6" stationary
Flex cable, connects bulkhead on one end, motor on the other for 2" and 3" motors; min. bend radius 5.6"
4X08SS
Cable for 8 motors, 4-wire, 8AWG w/shield; 0.480" (12.2mm) diameter
4X12SS
Cable for 4" and 6" motors, 4-wire 12AWG w/shield; 0.440' (11.2mm) diameter
4X16SS
Cable for 2" and 3" motors, 4-wire, 16 AWG w/shield; 0.380" (9.7mm) diameter
4X16SF
Flex cable for 2" and 3" motors, 4-wire, 16AWG, w/shield; min. bend radius 5.6"
4X12SF
Flex cable for 4" and 6" motors, 4-wire, 12AWG, w/shield; min. bend radius 9.0"
4X08SF
Flex cable for 8" motors, 4-wire, 8AWG, min. bend radius 9.2" for flexing
PT06A-16-8SSR
Motor power connector for 2" and 3" NT motors, female, not IP-65, not shielded, flex or non-flex cable
PT06E-16-8SWSF
Motor end power cable, female, w/backshell, IP-65, IP-65 shielded connector for 2" and 3" motors
Extension (male) mates with motor end of motor cable; IP-65, shielded, for 2" and 3" motors
PT01E-16-8PWSF
MS3106A-20-15SSR
Motor power connector for 4" and 6" NT motors, female, not IP-65, not shielded
MS3106A-20-15SWSF
4" motor power connector, female, not IP-65 shielded
MS3101A-20-15PWSF
Power cable extension plug for 4" motors, male; mates with motor end of motor cable (not shown above)
PTB-16-8
Motor bulkhead connector for 2" and 3" motors
Part Number
Standard Lengths (ft) Description Brake Cables and Connectors
CBMS
-005, -015, -025, -050, -100 Molded cable, standard duty, connector at motor only
CBMF
-005, -015, -025, -050, -100 Flex cable, connector at drive, leads at motor; IP-65 shielded connector for 2", 3", 4", 6" motors; min. bend radius 3"
CBMCS
Cable to be connected to bulkhead connector on one end and motor connector on the other end
PT06A-8-3SSR
Brake connector kit (not shown above)
PTB-8-3
Brake bulkhead connector
BRM-1
Brake relay module, 24V, 1 contract, 6A, DIN rail mounting
NOTE:
*Custom lengths available in 5ft increments
48
Cable Selection NT Motors to Drives

Feedback Cable Options: Motor to SP/DST/EP Incremental Encoders
PTB-16-23
CFOCS
PT06A-16-23SSR
MGFS or MGFF
UFCS
PT01E-16-23PWSF
CFEF
J8
Epsilon EP
SIBAAX
reset
L2
PE
seria l (J2)
act link
ether net ( J4 )
IM/0063/KI
S
T
+
_
3 MIN
EP204-P00-0000
9606XX-XX A1
SN 0610E014
digital i/o (J3)
CFOS or CFCF
L1
motor
PT06A-16-23SSR
log ic
NT Motors
EP204-IDN-EN00
9606XX-XX A1
SN 0610E014
J5 J10
For brake motors, a CBMS or

CBMF cable is required
Part Number
UFCS
Standard Lengths (ft)
= Flex cable
Standard duty cable for 2" and 3" motors, 8-pair with shield
Flex cable for 2" and 3" motors, 8 pair with shield; min. bend radius 5.6" for flexing, 6" for stationary
CFOCS
Molded extension cable, connects to bulkhead on one end, motor connector on the other end
CFOS
-005, -015, -025, -050, -100 Flex extension cable for encoder feedback motors w/circ. connectors both ends; min. bend radius: 5.6" flexing, 6" stationary
-005, -015, -025, -050, -100 Motor feedback cable, connector at motor only
-005, -015, -025, -050, -100 Flex motor feedback cable, connector at motor only; min. bend radius 5.6" for flexing, 6" for stationary
PT06A-16-23SSR
Female connector for motor feedback cable, not IP-65, not shielded
PT01E-16-23PWSF
Male connector for standard motor feedback cable, use at enclosure end with PTB-16-23, IP-65 shielded connector
PTB-16-23
Through-the-wall bulkhead connector for feedback cables
SIBAAX
Lengths are in meters
IM/0063/KI
Part Number
EPP
Description Feedback Cables and Connectors
MGFS
CFCF
DST
-005, -015, -025, -050, -100 Molded cable, connector both ends
MGFF
CFEF
USP
J6
Incremental feedback cable, connector drive end, high density 15-pin

High density 15-pin connector, motor feedback connector on SP,DST, EP
Standard Lengths (m) Description Encoder Breakout Board
STI-ENC
SM-ECT
NOTE:
*Custom lengths available in 5-ft increments
49
Cable Selection XV Motors to Drives

XV Motor Cables
Feedback Cables
XUFTS
XUFTEF
XV 40mm
60mm 80mm
XUFCS
J8
Epsilon EP
reset
XUFCEF
L1
L2
PE
S
motor
seria l (J2)
R
T
+
_
log ic
ether net ( J4 )
act link
3 MIN
digital i/o (J3)
EP204-P00-0000
9606XX-XX A1
SN 0610E014
XV 130mm
EP204-IDN-EN00
9606XX-XX A1
SN 0610E014
J5 J10
Power Cables
XTMDS
USP
DST
J6
EPP
XTMDEF
XV 40mm
60mm 80mm
XTBMS*
XTBMEF
XCMDS
J8
Epsilon EP
reset
L1
L2
PE
R
log ic
motor
seria l (J2)
XCMDEF
ether net ( J4 )
act link
S
T
+
_
3 MIN
EP204-P00-0000
9606XX-XX A1
SN 0610E014
digital i/o (J3)
XCMDBS
EP204-IDN-EN00
9606XX-XX A1
SN 0610E014
J5 J10
XV 130mm
Part Number
= Flex cable
*includes brake leads only.

XTMDS cable also required for brake motors
USP
DST
-005, -015, -025, -050, -100 XV Motor feedback cable.
XUFTS
-005, -015, -025, -050, -100 XV 40, 60, 80mm motor to DSUB connector on drive end; 15-pin, high density socket.
XUFTEF
-005, -015, -025, -050
Flex extension feedback cable for XV 40, 60, 80mm motor frames, connectors on bothe ends; bend radius: 5.6" flexing
XUFCEF
-005, -015, -025, -050
Flex extension feedback cable for XV 130mm motor frames, connectors on bothe ends; bend radius: 5.6" flexing
Part Number
XCMDS
-005, -015, -025
Motor power cable

Motor power cable
Description Power Cables
XTMDS
-005, -015, -025, -050, -100
Part Number
XCMDEF
-005, -015, -025
Flex motor power cable extension. For use with XCMDS; min. bend radius 5.6"
XTMDEF
-005, -015, -025
XTBMEF
-005, -015, -025, -050
XCMDBS
-005, -015, -025, -050
Flex motor power cable extension. For use with XTMDS; min. bend radius 5.6"
Flex duty brake cable for XV 40, 60, 80mm motor frames; TBNS male connector to TBNS female connector; designed as
extension of XCMDS cable
Flex duty brake cable for XV 40, 60, 80mm motor frames. TBNS male connector to TBNS female connector; designed as
extension of XCMDS cable
XTBMS
Description Power (Flex) Cables
Description Brake Cables
-005, -015, -025, -050, -100 Motor brake cable, standard duty, connector at motor only
Part Number
XCMDBEF
-005, -015, -025
Description Brake (Flex) Cable and Connectors

Flex motor brake cable extension for use with XCMDBS; min. bend radius 5.6"
J6
EPP
Description Feedback Cables and Connectors
XUFCS
Part Number
50
XCMDBEF
Unimotor FM Fan Kits

The FM Servo motors 075 to 190 frames can be field
fitted with a cooling fan. These fan kits are intended
for use in applications that operate near the thermal
limit of the motor. Each FM Motor is thermally
protected with an internal winding thermistor. If the
motor experiences a thermal trip condition and is
found to be operating near the thermal limit, a fan
kit may help provide continuous operation during
times of high continuous torque output. The motor
thermal protection should never be defeated or
bypassed as this could cause permanent damage to
the motor.
Fan kits are IP20 and include mounting hardware. A
terminal box mounted on the top rear of the fan shroud allows connection to the 230V fan leads.
Unimotor FM Fan Kits

Part Number
Description
075FB21
075 FM Motor Fan Box
095FB21
115FB21
142FB21
190FB21
51
Driving Technology...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Drive and Application Centers

International Distribution Centers
Control Techniques has a network of over
500 hundred distributors in North America.
Call for the distributor nearest you.
AMERICAS
Toll-free: 1-800-893-2321
[email protected]
Minneapolis Drive Center
Headquarters
T: 952 995 8000
For current authorized distributors

or resellers, please check the Control
Techniques web site.
DENMARK
Copenhagen Drive Center
INDIA
T: +45 4369 6100
[email protected] Chennai Drive Center
AUSTRALIA
T: +91 44 2496 1123/
Melbourne
2496 1130/2496 1083
FRANCE*
Application Center
[email protected]
Angoulme Drive Center
T: +613 973 81777
T: +33 5 4564 5454
[email protected] [email protected] Pune Application Center
T: +91 20 2612 7956/2612 8415
Sydney Drive Center
[email protected]
GERMANY
T: +61 2 9838 7222
New Delhi Application Center
[email protected] Bonn Drive Center
T: +91 112 2581 3166
T: +49 2242 8770
[email protected] [email protected]
AUSTRIA
Linz Drive Center
Chemnitz Drive Center
IRELAND
T: +43 7229 789480
T: +49 3722 52030
[email protected] [email protected] Newbridge Drive Center
T: +353 45 448200
[email protected]
Darmstadt Drive Center
BELGIUM
T:
+49
6251
17700
Brussels Drive Center
ITALY
[email protected]
T: +32 1574 0700
Milan Drive Center
[email protected]
T: +39 02575 751
GREECE*
[email protected]
Athens Application Center
CHINA
T:
+0030
210
57
86086/088
Shanghai Drive Center
Reggio Emilia Application Center
[email protected]
T: +86 21 5426 0668
T: +39 02575 751
[email protected]
[email protected]
HOLLAND
Beijing Application Center
Vicenza Drive Center
Rotterdam Drive Center
T: +86 10 856 31122 ext 820
T: +39 0444 933400
T: +31 184 420555
[email protected] [email protected] [email protected]
BRAZIL
So Paulo Application Center
T: +55 11 3618 6688
[email protected]
CZECH REPUBLIC
Brno Drive Center
T: +420 511 180111
[email protected]
Calgary Drive Center

T: 403 253 8738
Charlotte Application Center
T: 704 424 9811
Cleveland Drive Center
T: 216 901 2400
Grand Island
Americas Service Center
T: 716 774 1193
Los Angeles Application Center
T: 562 943 0300
Portland Drive Center
T: 503 266 2094
Providence Application Center
T: 401 392 4256
Toronto Application Center
T: 905 948 3402
LATIN AMERICAN & CARIBBEAN
REGION
Miami Sales Office
T: 305 818 8897
HONG KONG
Hong Kong Application Center
T: +852 2979 5271
[email protected]
KOREA
Seoul Application Center
T: +82 2 3483 1605
[email protected]
MALAYSIA
Kuala Lumpur Drive Center
T: +603 5634 9776
[email protected]
REPUBLIC OF SOUTH AFRICA
Johannesburg Drive Center
T: +27 11 462 1740
[email protected]
Cape Town Application Center
T: +27 21 556 0245
[email protected]
RUSSIA
Moscow Application Center
T: +7 495 981 9811
[email protected]
SWEDEN*
Stockholm Application
Center
T: +468 554 241 00
[email protected]
SWITZERLAND
Lausanne Application Center
T: +41 21 637 7070
[email protected]
Zurich Drive Center

T: +41 56 201 4242
SINGAPORE
[email protected]
Singapore Drive Center
T: +65 6891 7600
TAIWAN
[email protected]
Taipei Application Center
T: +886 2 8161 7695
SLOVAKIA
[email protected]
Emerson A.S
T: +421 32 7700 369
THAILAND
[email protected]
Bangkok Drive Center
T: +66 2962 2092 99
SPAIN
[email protected]
Barcelona Drive Center
T: +34 93 680 1661
TURKEY
[email protected]
Istanbul Drive Center
Bilbao Application Center
T: +90 216 4182420
T: +34 94 620 3646
[email protected]
[email protected]
UAE*
Valencia Drive Center
Emerson FZE
T: +34 96 154 2900
T: +971 4 8118100
[email protected]
[email protected]
P/N BRO-SRVOMTRS-1107
UNITED KINGDOM
Telford Drive Center
T: +44 1952 213700
[email protected]
*Operated by sister company,

Leroy Somer
11/11
Control Techniques 2012. The information contained in this brochure is for guidance only and does not form part of any contract. The accuracy cannot be guaranteed
as Control Techniques has an ongoing process of development and reserves the right to change the specification of its products without notice. Printed in the USA.

Servo Motors: Product Data

Uploaded by

Copyright:

Available Formats

Servo Motors: Product Data

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Servo Motors: Product Data

Uploaded by

Copyright:

Available Formats

Servo Motors

Cables for Servo Motors .............................................................42

XV Motor 230V ............................................................................19

Certificate No. EMS 54446

Certificate No. Q 05176

A Servo Motor for Every Application

Control Techniques designs its products using a proven

Control Techniques offers a wide range of reliable servo

Compact low-inertia servo motor for high-dynamic applications

Voltage Rating: 230V/460V

Voltage Rating: 230V

Voltage Rating: 230V

Voltage Rating: 230V/460V

Ratings: IP65; UL and CE compliant

A Wide Range of Rugged and Reliable Servo Motors

55, 67, 89, 115mm

40, 60, 80, 130mm

55, 75, 95, 115, 142, 190mm

Low (high-inertia opt.)

Med. (high-inertia opt.)

Circular style frame mounted

MS or circular style frame

Incremental encoders, optical

AMP Mat-n-Loc on 1ft. lead

Circular style frame-mounted

IP65, IP67, IP68

CE, UL, RoHS

CE, UL (RoHS opt.)

CE, UL, RoHS

CE, UL, RoHS

Why Motion Customers Choose Control Techniques Motion Control Solutions...

Selecting the Right Motor for the Right Drive

Example (using Control Techniques NT Motor family and

Continuous Stall Torque (lb-in)

Continuous Stall Torque (Nm)

Standard Inertia (lb-in-sec2)

Standard Inertia (kgm2)

Peak Torque (lb-in)

Peak Torque (Nm)

Maximum Cogging (lb-in)

Maximum Cogging (Nm)

Motor Weight (lbs)

Motor Weight (kg)

Rated Speed 5000 rpm Kt (Nm/A) =

load inertia/rotor inertia <10

Note: A gear reducer will reduce the load inertia based on

Rated Torque (lb-in)

Rated Torque (Nm)

Stall Current (A)

Rated Power (kW)

Drive switching frequency at 6kHz for rated performance

Unimotor HD 230V / 460V

The Unimotor HD torque profile is closely matched to

Unimotor HD motors (shown with a Control Techniques

Certificate No. Q 05176

Unimotor HD Torque Range

Unimotor HD 230V / 460V Order Information

30 = 3000 rpm 0 = Not Fitted (Std) B = Power and

115 Frame 30 = 3000 rpm 0 = Not Fitted (Std)

Note: A gear reducer will reduce the load inertia based on