Scribd Logo
Upload

Welcome to Scribd!

  • 475 views

    Conmix Utg 2011

    Uploaded by

    Fredj Ben Salem
    UTG is a dry pre-mix, cement-based tile adhesive for fixing ceramic tiles to walls and floors. It has a long open time and is waterproof. UTG is mixed with water, applied in a thin layer, and used to adhere tiles within 45 minutes. The document provides instructions on surface preparation, mixing, application, grouting, and storage of UTG tile adhesive.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Conmix Utg 2011

    Uploaded by

    Fredj Ben Salem
    475 views2 pages
    UTG is a dry pre-mix, cement-based tile adhesive for fixing ceramic tiles to walls and floors. It has a long open time and is waterproof. UTG is mixed with water, applied in a thin layer, and used to adhere tiles within 45 minutes. The document provides instructions on surface preparation, mixing, application, grouting, and storage of UTG tile adhesive.

    Original Title

    CONMIX UTG 2011

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    UTG is a dry pre-mix, cement-based tile adhesive for fixing ceramic tiles to walls and floors. It has a long open time and is waterproof. UTG is mixed with water, applied in a thin layer, and used to adhere tiles within 45 minutes. The document provides instructions on surface preparation, mixing, application, grouting, and storage of UTG tile adhesive.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    475 views2 pages

    Conmix Utg 2011

    Uploaded by

    Fredj Ben Salem
    UTG is a dry pre-mix, cement-based tile adhesive for fixing ceramic tiles to walls and floors. It has a long open time and is waterproof. UTG is mixed with water, applied in a thin layer, and used to adhere tiles within 45 minutes. The document provides instructions on surface preparation, mixing, application, grouting, and storage of UTG tile adhesive.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    CONMIX LTD.

    UNIVERSAL TILE GLUE - UTG

    Top grade tile adhesive...


    UTG is a dry pre mix, waterproof, cement-based tile glue for thin-bed fixing of ceramic tiles on walls and floors. Long open time and excellent workability ensure the fixing of even heavy tiles. Available in grey and white colour.

    TECHNICAL DATA
    Composition : Ordinary Portland Cement, oven dried, processed sand and chemical additives. Binder Aggregate Size Appearance Mixing Ratio : : : : Portland Cement 0-0.6 mm Granular powder available in Grey &White colours

    APPLICATION METHOD
    BACKGROUND UTG is a thin bed mortar suitable for fixing a wide variety of wall and floor tiles onto backgrounds such as: Portland Cement based

    renders, floor screeds, concrete 7.5 ltrs of water per 25 kg bag Water/Powder ratio = 0.30 Approx. Yield/Coverage * : 18 ltrs per 25 kg bag; 6m2 per 25 kg bag at 3mm thickness Density * Compressive Strength * Flexural Strength * Pack Size Shelf Life : : : : : Wet : 1.8 kg/ltr 20 N/mm2 @ 28 days 3.0 N/mm2 @ 28 days 25 kg paper bags The suction in the background 12 months from date of production when stored under dry conditions Working Time Specification : : Approx. 45 minutes ANSI, BS5385, BSEN12004, DIN:18156-2 should be neutralized by applying potable water. Free water on the surface should be allowed to disperse before applying UTG. Dry : 1.7 kg/ltr and gypsum boards. UTG should not be applied onto wood, metal sheets or painted surfaces. The background and tile must be clean, free of dust deposits, sinter skin, formwork oil and other contamination, which may affect the adhesion.

    * Typical results under laboratory condition Cont...

    Application tools

    1/2

    PMP/UTG/ Ver2/04/10

    Pre-treatment, ie. wetting of tiles is essential. However, due to the wide variety of tiles available, it is advisable to consult the tile manufacturer for recommendations. MIXING UTG supplied in 25 kg bags has to be mixed with potable water only, in a clean plastic bucket or a clean, non-corrosive uncontaminated metal tub. To ensure a homogeneous and uniform mix, an electric agitator must be used. The amount of water to be added is approximately 7.5 ltrs per 25 kg bag (i.e. 30% by weight). Add UTG to water, turn the contents of the bag carefully and stir frequently. Once mixed, allow to stand for 5 minutes and mix again before applying. No further water should be added to the mix. The mixed mortar must be used within 45 minutes. Hard and set mortar should not be re-mixed or used. APPLICATION UTG is applied in one coat, having a thickness of 3-5 mm. To achieve a uniform thickness the mortar is levelled with a serrated trowel. The thickness of the ribs will depend on the size and type of the tile. Do not spread more than 1m2 at a a time, spreading larger areas may result in the mortar drying out before tiles can be pressed home, resulting in poor adhesion. Once the mortar has been applied, the working time will vary according to the porosity of the surface and ambient conditions. While tiling in wet areas, i.e. swimming pools, shower rooms etc, ensure solid bedding, no voids or air pockets behind the tiles. Do not apply the mortar sparingly. Buttering the mortar onto the back of the tile is not recommended; but if essential it should be spread over the entire back of the tile to an even depth. Conmix demonstration team will assist in these procedures upon request. SPECIAL NOTES UTG has to be protected from direct exposure to sun, wind and rain during application. Ceramic tiles should never be fixed with tight joints. Leave a minimum space of 2 mm around every tile. Tiling in newly constructed buildings should not commence until all shrinkage movement and creeping has taken place. Cement based mortars, plasters, renders and floor screeds must be allowed to harden before tiling commences. Grouting should not be carried out for at least 48 hours after the completion of tiling. STORAGE Conmix UTG must be stored in a dry place, off the ground and well covered. Hard or lumpy material must be rejected.

    PMP/UTG/ Ver2/04/10

    2/2

    It is the customers responsibility to satisfy themselves by checking with the company that the information is still current at the time of use. The customer must be satisfied that the product is suitable for the use intended. All products comply with the properties shown on current data sheets.Conmix however do not warrant or guarantee the installation of the products as it does not have any control over installation or end use of product. All information and in particular the recommendations relating to application and end use are given in good faith. The products are guaranteed against any defect and are manufactured and sold to Conmix standard terms and conditions of sale.

    You might also like