2716 C

PRODUCT DATA
Audio Power Amplifier 100 W Stereo Type 2716-C
Audio Power Amplifier Type 2716-C is a high-performance power amplifier optimised for sound and vibration applications. It can be used as a general-purpose power amplifier for electroacoustic applications. USES Driver for loudspeakers, artificial mouths, etc. General-purpose audio power amplifier Power amplifier for audio analyzers FEATURES Output-level meter Selectable gain Two balanced inputs Easy to install in a 19 rack
Description
Audio Power Amplifier Type 2716-C has two channels that can be used independently or jointly. Signals enter electronically balanced inputs, Input CH.A and Input CH.B, via XLR connectors. Output is approx. 300 W and is relatively independent of load. Audio Power Amplifier Type 2716-C is compact and fits in a 19 rack. It has the same features and protection circuits normally found only in higher powered amplifiers.
Quiet Operation
Type 2716-C uses passive cooling during operation which removes the need for a cooling fan. The lack of a cooling fan, in turn, makes Type 2716-C very quiet during operation.
Extensive Protection
Power Amplifier Type 2716-C has circuits that protect it against short-circuits, DC, overheating, VHF and clipping (clip limiter may be switched off).
Compliance with Standards

, Safety EMC Emission EMC Immunity Temperature CE-mark indicates compliance with: EMC Directive and Low Voltage Directive. C-Tick mark indicates compliance with the EMC requirements of Australia and New Zealand EN/IEC 60065, Audio, video and similar electronic apparatus Safety Requirements EN 55103 1, E3: EMC Product family standard for audio, video, audiovisual and entertaining lighting control apparatus for professional use Part 1: Emission EN 55103 2, E3: EMC Product family standard for audio, video, audiovisual and entertaining lighting control apparatus for professional use Part 2: Immunity IEC 6006821 & IEC 6006822: Environmental Testing. Cold and Dry Heat. Operating Temperature: +5C to +40C (+41 to +104F) Storage Temperature: 25 to +70C (13 to +158F) IEC 6006823: Damp Heat: 90% RH (non-condensing at 40C (104F)) Non-operating: IEC 6006826: Vibration: 0.3 mm, 20 m/s2, 10500 Hz IEC 60068227: Shock: 1000 m/s2 IEC 60068229: Bump: 1000 bumps at 250 m/s2 IEC 60529: Protection provided by enclosures: IP20
Humidity Mechanical
Enclosure
Specifications Audio Power Amplifier Type 2716-C

MAXIMUM OUTPUT POWERa Load 8 stereo 4 stereo 2 stereo 8 bridged 4 bridged EIA @ 1 kHz and 1% THD 110 W 160 W 200 W 320 W 400 W INPUTS AND OUTPUTS Gain: 30 dB 1 dB Input Attenuator: 0 30 dB in 6 dB 0.3 dB steps Impedance: 20 k Common Mode Rejection: 50 dB@1 kHz Slew Rate: 25 V/s Output Impedance: 0.03 Hum and Noise: More than 105 dB below max. power Channel Separation: 70 dB@10 kHz FRONT PANEL Gain Controls: 2 channels, A and B Clip Indicator: 2 red LEDs, fast peak and slow release or shorted output Protection Indicator: 2 yellow LEDs, 80C at heat sink or 12 kHz at full power Present Indicator: 2 green LEDs, 25 dB at input On Indicator: 2 green LEDs, DC rail voltage for channel A and B REAR PANEL Input Connectors: Two XLR-type, 3-pin female (pin 2+) and 1/4 jack Output Connectors: Two Neutrik, 4-pin, Speakon sockets Link: Stereo Link/Bridge A + B Clip Limiter: On/Off POWER REQUIREMENTS Voltage Selector: 230 V/115 V DIMENSIONS W H D: 48.3 4.4 28.0 cm (19 1.7 11 inches) WEIGHT 7.5 kg (16.5 lb.)
FREQUENCY RESPONSE (8 , 1 W) 20 Hz 20 kHz: +0, 1 dB

a. Measured specifications for a 230 V AC. Continuous power (1 hour) is 1/3 of this
Ordering Information
Type 2716-C-001 Audio power amplifier (no accessories) Type 2716-C 2 WL-1324 2 WL-1325 Audio Power Amplifier with the following accessories: BNC to XLR cable, 3 m 2 Banana to Speakon cable, 5 m OPTIONAL ACCESSORIES AQ-0621 Bridging cable
TRADEMARKS Neutrik and Speakon are registered trademarks of Neutrik AG Brel & Kjr reserves the right to change specifications and accessories without notice
HEADQUARTERS: DK-2850 Nrum Denmark Telephone: +45 4580 0500 Fax: +45 4580 1405 www.bksv.com [email protected] Australia (+61) 2 9889-8888 Austria (+43) 1 865 74 00 Brazil (+55)11 5188-8161 Canada (+1) 514 695-8225 China (+86) 10 680 29906 Czech Republic (+420) 2 6702 1100 Finland (+358) 9-755 950 France (+33) 1 69 90 71 00 Germany (+49) 421 17 87 0 Hong Kong (+852) 2548 7486 Hungary (+36) 1 215 83 05 Ireland (+353) 1 807 4083 Italy (+39) 0257 68061 Japan (+81) 3 5715 1612 Republic of Korea (+82) 2 3473 0605 Netherlands (+31)318 55 9290 Norway (+47) 66 77 11 55 Poland (+48) 22 816 75 56 Portugal (+351) 21 4169 040 Singapore (+65) 6377 4512 Slovak Republic (+421) 25 443 0701 Spain (+34) 91 659 0820 Sweden (+46) 33 225 622 Switzerland (+41) 44 8807 035 Taiwan (+886) 2 2502 7255 United Kingdom (+44) 14 38 739 000 USA (+1) 800 332 2040 Local representatives and service organisations worldwide
BP-1923---;
BP 1923 12
2007-02
Rosendahls Bogtrykkeri
SPEAKER PROTECTION Short-circuit, DC, VHF a thermal protection is provided

2716 C

Uploaded by

Copyright:

Available Formats

2716 C

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2716 C

Uploaded by

Copyright:

Available Formats

PRODUCT DATA

Audio Power Amplifier 100 W Stereo Type 2716-C

Compliance with Standards

Specifications Audio Power Amplifier Type 2716-C

FREQUENCY RESPONSE (8 , 1 W) 20 Hz 20 kHz: +0, 1 dB

SPEAKER PROTECTION Short-circuit, DC, VHF a thermal protection is provided

You might also like