Scribd Logo
Upload

Welcome to Scribd!

  • 83 views

    C Series: Cage Design Control Valves

    Uploaded by

    dnageshm4n244
    C series cage design control valves conform to the requirements laid down by ANSI B 16. And ASME VIII, and is compatible with all industry standard interface devices. The modular design concept of the valve means many control valve solutions may be achieved from a single valve envelope. Standard valve sizes in 1" to 8" (DN25 to DN200) Body rating to ANSI Class 300 and 600 Reduced flow capacities for load matching Perforated trims for noise and cavitation problems wide range of materials to meet the varying

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    C Series: Cage Design Control Valves

    Uploaded by

    dnageshm4n244
    83 views6 pages
    C series cage design control valves conform to the requirements laid down by ANSI B 16. And ASME VIII, and is compatible with all industry standard interface devices. The modular design concept of the valve means many control valve solutions may be achieved from a single valve envelope. Standard valve sizes in 1" to 8" (DN25 to DN200) Body rating to ANSI Class 300 and 600 Reduced flow capacities for load matching Perforated trims for noise and cavitation problems wide range of materials to meet the varying

    Original Title

    Valve-spirax Arco Cv

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    C series cage design control valves conform to the requirements laid down by ANSI B 16. And ASME VIII, and is compatible with all industry standard interface devices. The modular design concept of the valve means many control valve solutions may be achieved from a single valve envelope. Standard valve sizes in 1" to 8" (DN25 to DN200) Body rating to ANSI Class 300 and 600 Reduced flow capacities for load matching Perforated trims for noise and cavitation problems wide range of materials to meet the varying

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    83 views6 pages

    C Series: Cage Design Control Valves

    Uploaded by

    dnageshm4n244
    C series cage design control valves conform to the requirements laid down by ANSI B 16. And ASME VIII, and is compatible with all industry standard interface devices. The modular design concept of the valve means many control valve solutions may be achieved from a single valve envelope. Standard valve sizes in 1" to 8" (DN25 to DN200) Body rating to ANSI Class 300 and 600 Reduced flow capacities for load matching Perforated trims for noise and cavitation problems wide range of materials to meet the varying

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    C series

    cage design control valves

    C series
    Cage design control valves

    About the C series


    The C series is a cage design control valve that conforms to the requirements laid down by ANSI B 16.34 and ASME VIII, and is compatible with all industry standard interface devices. At its heart is a cage-guided plug that provides: Excellent control of the process over high differential pressures Quick and easy maintenance Conceived specically with erosive, cavitating and noisy applications in mind, the modular design concept of the valve means many control valve solutions may be achieved from a single valve envelope. Pneumatic or electrically operated, the C series features: Standard valve sizes in 1" to 8" (DN25 to DN200) Body rating to ANSI Class 300 and 600 A wide range of industry standard pipe connections Reduced ow capacities for load matching Characterised cage ow Perforated trims for noise and cavitation problems Wide range of materials to meet the varying demands from industry, including hard faced trims

    The range at a glance


    Valve type Class rating Valve sizes Body materials Connections Flow type Reduced ow options Noise reduction and anticavitation trims Yes Hard facing for erosive duty Yes Manual handwheel

    Unbalanced and balanced

    ANSI 300 ANSI 600 A higher rating is available to order

    1" to 8" (DN25 to DN200) Larger sizes are available to order

    Carbon steel (WCB) Stainless steel (C8FM) Alloy (WC6) Other materials are available to order

    Flanged Butt weld Socket weld Ring type joint

    Equal % Modied equal % Linear Fast opening

    Yes

    Yes

    Available options
    Extended bonnets for high and low temperature service and stainless steel bellows for low maintenance, high temperature and zero emission requirements

    Bellows sealed bonnet

    Extended bonnet

    Chevron
    Valve stem sealing options include PTFE chevrons and high temperature graphite rings

    Graphite

    Unbalanced plug

    Cage design trim gives stable control with equal percentage, fast opening and linear ow characteristic for process load matching

    Equal percentage

    Fast opening

    Linear

    Balanced plug

    One stage cage


    One, two and three stage cage options for noise reduction and anti-cavitation

    Two stage cage Three stage cage

    Balanced plug option for high differential pressures

    applications

    Fluid ow through a valve


    When uid ows through a valve the resistance to ow causes pressure to be dropped and velocity to increase by the same proportion. The more resistance the valve provides, the greater the pressure drop and the greater the increase in velocity. Depending on the ow conditions, this change in energy through the valve can create aerodynamic noise and cavitation.

    Pressure and velocity curves Stream velocity Stream pressure

    Pvc Fluid vapour pressure Onset of cavitation Flow direction

    Aerodynamic - The solution


    Controlling aerodynamic noise is a function of controlling the velocity through the valve. By employing a number of cages, which provide successive energy absorbing pressure drops, the velocity through the valve is controlled to acceptable levels. Where the conditions require further treatment, external devices such as bafe plates and silencers may be employed.

    Velocity curve Stage 1 Stage 2 Stage 3

    Flow direction

    Cavitation - The solution


    Controlling cavitation is a function of controlling the pressure at the vena contracta (P vc). By employing a number of cages, which provide successive energy absorbing pressure drops, the resistance of the ow path increases and the P vc is controlled. The result is that the onset of cavitation can be avoided. Where the conditions require further treatment, external devices such as bafe plates can be employed.
    Fluid vapour pressure

    Pressure curve

    Stage 1

    Pvc

    Stage 2

    Flow direction

    Industries, uids and applications Where the C series has been frequently used
    Fluids Saturated steam Superheated steam Feedwater Water Petroleum Natural gas Methane Air Nitrogen Industries Pharmaceuticals Chemical plants Power generation Co-generation Oil and gas Shipyards Textiles Foods Paper Applications Turbine bypass Pressure reduction Temperature control Desuperheating Boiler level control Backpressure control

    Summary of key features and benets


    Key features Key reasons
    Cage guided internals minimise lateral deection of the plug. Characterised cage windows give precise ow characteristics. Reduced ow options for load matching.

    Key benets
    Guaranteed control performance over a wide range of process conditions.

    Excellent control

    Wide range of process uids and conditions

    Balanced plug option for high differential pressures. Three stages of perforated cage for cavitation and noise problems. Hard facing for erosive duties. Bellows seal for high and low temperatures and low emissions. Extended bonnets for high and low temperatures. Many material options.

    Common control valve range and spares for all your process needs, simplies maintenance and reduces plant downtime.

    Long stem seal life

    High quality machined stem nish minimises stem friction and seal wear. Wiper rings clean the valve stem during operation and prevent particles entering and damaging the stem seal. Caged internals and stem bushes ensure excellent alignment, even under high differential pressures.

    Extended maintenance intervals.

    Long actuator life on a wide range of industry applications

    Internally treated surfaces to protect against atmospheric corrosion. High strength cast steel yoke. Anti-rotation device preventing damage to the diaphragm. Rolling diaphragm design based on Spirax Sarcos proven actuator technology.

    Low lifetime cost of ownership.

    Quick and easy maintenance

    Valve internals, seat and cage, are clamped in place.

    No special tools required to change the components. Minimal maintenance downtime.

    Worldwide traceability

    A unique serial number is allocated to every valve.

    The unique features of your valve and actuator can be identied for replacement and maintenance purposes, wherever you are in the world. Peace of mind that your purchases are supported wherever you are in the world and that one single contact will full your controls requirements, from design to after sales service.

    Part of a total controls solution from Spirax Sarco

    One of many controls and instrumentation products that may be acquired separately or as a complete one-stop-shop controls solution.

    Group companies
    Africa
    South Africa

    Sales ofces
    Africa
    Egypt Kenya Nigeria

    Distributors
    Africa
    Algeria Cameroon Ethiopia Ghana Ivory Coast Libya Malawi Mauritius Morocco Namibia Senegal Sudan Tanzania Tunisia Uganda Zambia Zimbabwe

    Australasia
    Australia New Zealand

    Asia
    Bangladesh

    Americas
    Argentina Brazil Canada Mexico USA

    Europe
    Austria Belgium Czech / Slovak republic Denmark Finland France Germany Italy Norway Poland Portugal Russia Spain Sweden Switzerland UK

    Australasia
    Fiji

    Americas
    Colombia Venezuela

    Europe
    Bulgaria Croatia Cyprus Estonia Greece Iceland Latvia Lithuania Malta Netherlands Romania Serbia and Montenegro Slovenia Turkey

    Asia
    China India Japan Korea Malaysia Singapore Taiwan Thailand

    Asia
    Hong Kong Indonesia Pakistan Philippines Vietnam

    Europe
    Austria Hungary Ireland

    Americas
    Bolivia Chile Colombia Costa Rica Dominican Rep Ecuador El Salvador Guatemala Honduras Jamaica Nicaragua Panama Paraguay Peru Trinidad Uruguay Venezuela

    Middle East
    UAE

    Middle East
    Bahrain
    Iran Jordan Kuwait Lebanon Oman Qatar Saudi Arabia Syria

    Not all associates can offer all services /solutions detailed in this sales brochure

    Spirax-Sarco Limited Cheltenham UK GL53 8ER t: +44 (0)1242 521361 f: +44 (0)1242 573342 e: [email protected] www.SpiraxSarco.com /controls

    SB-F12-19 CH Issue 4

    Copyright 2006 Spirax Sarco is a registered trademark of Spirax-Sarco Limited

    You might also like