Power From Magnetism L

ENERGY SCIENCE REPORT No.
Page 1 of 21
ENERGY SCIENCE REPORT No. 4

This Report was first published in 1994 at a time when the author was involved in experimental research aimed at seeing if one could tap energy from the vacuum medium. This might seem to be an absurd pursuit but there were certain anomalies in experimental findings and debatable issues of a theoretical nature that needed resolution. As this Report shows, the author was not alone in seeing the need to clarify some of the mystery which clouds our understanding of magnetism. This version of the Report now published on Internet some nine years on from its printed publication in 1994 is an unamended copy of that original text, made available here for historical record of the author's efforts........... Harold Aspden, 18 June 2003
ENERGY SCIENCE REPORT NO. 4
POWER FROM MAGNETISM: THE POTTER DEBATE HAROLD ASPDEN, 1994
Contents
Introduction Preliminary Background The Kilmister Introduction The Rotating Magnet in a Cyclically-Exited Solenoid Axially Reciprocating Magnet in a Cyclically-Excited Solenoid Preliminary Remarks Step-by-Step Analysis of the Problem http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
ENERGY SCIENCE REPORT No. 4 Onward Experimentation COMMENTARY ON APPENDICES APPENDIX A: Letter from Frank Potter APPENDIX B: Potter's Reciprocating Magnet engine Proposal APPENDIX C: How Flux Develops EMF in a Solenoid APPENDIX D: EMF Generated in Solenoid by Rotating Magnet
Page 2 of 21
****************
POWER FROM MAGNETISM: THE POTTER DEBATE Introduction This Energy Science Report is written at a time when a surge of activity has developed on the 'free energy' scene concerning the prospect of tapping energy from the quantum action of the vacuum state - the aether. The research claims of New Zealander Robert G. Adams have become the focus of attention owing to his disclosure of the design of a motor which performed anomalously and which was said to deliver more mechanical power than was supplied as electrical input. This has been mentioned in ENERGY SCIENCE REPORT NO. 1 in this series and more on the motor topic generally will be reported in later reports. The scenario developing at the present time has become one of contention amongst different proponents working in this field as the struggle for recognition begins to cloud the interpretation of the evidence and results in the withholding of information. The 'free energy' prospect is still an issue of debate awaiting the clear demonstration of a working machine that can withstand all tests and scrutiny by experts. It had been hoped that the Adams motor would have featured in such a demonstration at the Denver, Colorado symposium in May 1994 organized by the Institute for New Energy, but, at the present time, April 1994, that is no longer in prospect for reasons totally unrelated to the technical merits of the Adams development. This author seeks by this Report to draw attention to what, in a sense, has been a 'behind the scenes' secret debate pursued by Frank F. Potter of Croydon in England who has aroused the interest of a few physicists in British universities. His topic is that of calculating the interactions and behaviour between magnets and a magnetizing solenoid. His concern is to get an answer to the question of how the energy involved can be formulated theoretically in a way which allows experimental testing. Potter's intuition has, it seems, followed for many years a track not too different from that which may have inspired Robert Adams and others, including the German, Hans Coler, whose experimental work, after confirmation, became the subject of a secret government report dating from the World War II era. What is so fascinating about the Potter interest is that, although it dates from many years past, it has not surfaced hitherto in a way which has become known to those now interested in the 'free energy' field. It is especially interesting because Potter's correspondence indicates that academics skilled in mathematical physics, though showing diligence in their efforts, have been unable to provide answers that satisfy Potter. The Potter debate provides a new perspective and a new starting point for resolving the 'free energy' issue concerning magnets subjected to solenoidal fields, bearing closely upon the theory of operation of the Adams motor. It is timely to discuss openly the answers to the questions raised. http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
Page 3 of 21
Preliminary Background It may interest readers to know the background of how it was that this author came to hear about Frank F. Potter. For several years there have been annual meetings held in September at Cambridge University in England by an organization named ANPA, the Alternative Natural Philosophy Association. One theme pursued with great interest by many members of this association is that of calculating the basic physical constants, such as the protonelectron mass ratio, by mathematical techniques involving what is termed a 'combinational hierarchy'. This author has long been interested in the creative activity of the vacuum energy field in producing protons and that research had led to published work on the calculation of the proton-electron mass ratio by methods distinct from those of special interest to ANPA. A spin-off from that research was the theoretical derivation of the measured properties of the deuteron. The author had been especially interested also in the electrodynamic properties of these particles and electrodynamic actions within metal conductors and so, with the advent of 'cold fusion', there was purpose in extending the research with the 'alternative energy' scene in mind. A particularly interesting development was the extension of the theory to the theoretical derivation of the properties of the third isotope of hydrogen, namely the triton and it was the simple derivation of the lifetime of triton, which the author saw as confirming his theory, that gave reason for an initiative to attend the 1993 ANPA meeting in Cambridge to present that theory. That latter subject warrants its own Report in this series of ENERGY SCIENCE REPORTS and will be dealt with separately. Now, in attending that September ANPA meeting, the author had very much in mind the fact that he had earlier, in April 1993, attended the Denver, Colorado symposium on New Energy and become very interested in the reports on the Adams motor. Also, in August, the author had attended a meeting in Atlanta, Georgia to report experimental progress on energy conversion technology in which magnetism affecting electric free charge carriers in metal can convert thermal energy into electrical output. In a sense, this is magneto-hydrodynamics at work within a solid metal. This is the subject of ENERGY SCIENCE REPORT No. 2 and No. 3. Therefore, although in Cambridge to talk about protons, deuterons and tritons in a theoretical context, the author had become more preoccupied by his interest in the extraction of power from magnetism, as evidenced by the Adams motor technology and as researched somewhat superficially by the author in his own earlier work. It was the Adams situation that gave stimulus for new experimentation, and it was a question of being patient and waiting for Adams himself and others to take that work forward or whether to divert effort into one's own experimental programme. One thought had been to build a kind of recriprocating engine, resembling a steam-engine piston-and-cylinder action, there being a soft-iron 'piston' member moving inside a solenoid and interacting with a permanent magnet to open and close an air gap. Indeed, owing to the fact that there was a corner shop at the junction of Trinity street and Bridge Street in Cambridge, located between Trinity College where the author was lodging and the college venue of the ANPA meeting, the author had pursued enquiries in that shop with the experiment in mind. It had a model steam engine in the window. So it was later that morning that, in a side discussion with Professor Clive Kilmister during a coffee break at the Cambridge meeting, the author mentioned the growing interest in USA in 'free energy', centred on the Denver, Colorado event. Specifically mentioned were the claims made by Adams in his description of the motor as reported in the Australian magazine NEXUS. Surprisingly this evoked the comment from Professor Kilmister that for several years he had been exchanging correspondence with a person named Frank Potter who had been suggesting something very similar. He resolved to tell Potter about my interest in the subject and it was this which gave the basis for this Report. Extracts from some of Frank Potter's letters to this author are to be found in APPENDIX A and B. Having promised Potter a full reply, on the basis that what was said would be published in some way, that reply is documented here as the subject of this Report. It was intended to allow this to evolve with a view to presenting a summary account at the September 1994 ANPA meeting and in the hope that Professor Kilmister might participate in the discussion, but in view of the surge of criticism that is currently affecting the Adams motor project the author has brought this version of the Report forward so as to have it in hand at the May 1994 New Energy Symposium in Denver, Colorado. The reason for this is that it is better to address the basic physics of the subject from a new starting point, one that has background in U.K. and has involved some discussion in academic circles, rather than building a physical account which relies on a version of a motor for which there is no authenticated performance data. It could well be that different implementations of the Adams-type motor may function differently, some operating 'over-unity' and some not, this being owing to a lack of design understanding of the basic physical factors that are at work. Hence, a first-principle analysis has merit, especially if it meets Potter's objective of providing what hopefully is a reliable theoretical model on which to base experiment. Finally, as further background, it should be mentioned that research reported by Stefan Marinov is relevant to the subject under discussion and no doubt Marinov will http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
Page 4 of 21
contribute to the later debate which this Report initiates. However, as the sole object here is to answer Frank Potter's questions the commentary below will be confined to that pursuit. The Kilmister Introduction The following is a confirming letter dated September 18, 1993 sent to the author by Professor Clive Kilmister. "Dear Harold, It was very interesting hearing your talk at ANPA and even more so hearing what you say about magnetism. I have for a long time been exchanging letters with someone who is convinced that there is something odd about the energy of permanent magnets and has devised mechanical devices (a bar magnet suspended entirely within a large solenoid for example) to show this. I have taken the liberty of suggesting to him that you might be able to give him some references to other work. Sorry about the handwriting - I haven't been home since ANPA. The man's name is Frank Potter. Yours, Clive." Readers familiar with the 'free energy' research involving magnets, research which is seldom mentioned in the orthodox scientific literature, will understand how it is that there can be questions in this field that really do need answering in open debate but seldom surface for fear of the 'perpetual motion' issue that pervades the subject. There is, it seems, something lacking in our world of education when the doctrinaire background of physics sets up a barrier in the form of statements of physical law, without involving discussion in a tolerant, patient and in-depth way of the factors that govern ferromagnetism at its energy frontier with the sub-quantum world. This is not just a question of classification of what is observed as a hierarchy of quantum behaviour of electrons in atoms; it is really the issue of how the action we associate with such quantum theory delivers energy able to sustain the properties of a ferromagnet. How is it that permanent magnets can suffer fluctuating field influences continuously for decades, if not centuries, whilst keeping their magnetic vitality? The word 'permanent' has meaning, as does the word 'perpetual', but scientists accept 'permanent magnetism', which is, in a sense, 'perpetual magnetism', whilst showing amusement and derision at the idea of 'perpetual motion', even though 'permanent motion' or motion at a uniform velocity is countenanced in mechanics. There is a case to answer and it is hoped that this Report will serve in making that case, if not the answer, clear enough for the scientific community to take this subject seriously. The intention in the pages which follow is to follow standard physics to give prediction of what is to be expected in the Potter experiments proposed. We will not restrict ourselves to the short-cut of the doctrinaire route, not because one sees merit in challenging doctrine and discrediting established physics, but more with a view to directing experimentation at what potentially is the key area that has been neglected for too long. Only the subsequent experimental investigation can give the final answer to this probe into energy matters, but we must not allow a restrictive interpretation of energy conservation doctrine, as such, to stand in the way of such experiment. The subject of a new energy source is far too important for us to allow any stone obstructing our path to remain unturned and, even if the 'thought' experiment which is our starting point might not have practical application in the form presented, it is worth scrutiny. The Rotating Magnet in a Cyclically-Excited Solenoid One can conceive building an electric motor by mounting a magnet to rotate inside a large solenoid, so that the plane of rotation of the magnet lies along the longitudinal axis of the solenoid. Then by reversing the current in the solenoid periodically the magnet should turn at the same rate and so be driven as the rotor of a motor. A schematic illustration of such a system is shown in Fig. 1.
Fig. 1 Solenoid excited rotating magnet motor Readers may say that this is only a special, and rather poor, form of a class of motors known in standard technology where permanent magnet rotors interact with the http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
Page 5 of 21
commutated excitation of a stator winding. Such motors are known to comply with energy conservation principles and perform in accordance with well-established design practices and pose no anomalies. Indeed, their performance efficiences are clearly set out in the commercial literature used to market them and it might, therefore, seem absurd and pointless to even consider the theory of operation of the motor system shown in the figure. However, Frank Potter has a way of putting his question logically, if not concisely, and guiding us into a state of doubt (See Appendix A). To put this in context it is not just a question of observing a real motor performing overall on a duty cycle averaged over a complete revolution of the rotor. Like a tight-rope walker who stays on the rope, one may well perform a balancing trick by which the energy books are kept in balance, but this does not preclude a tendency for that tight-rope walker to fall off the rope and draw on gravitational energy in the fall. If he does not fall off, he is nevertheless constantly exchanging energy with the quantum world that powers gravity, drawing on that as his centre of gravity drops and giving that energy back to Nature's store of gravitational potential as he recovers an erect posture. The overall equilibrium performance disguises the fact that he is a kind of human 'free energy' machine at least for about half the time he is on that rope. So it may be that, if we study the energy action step-by-step as the motor rotates, conceivably the magnetic energy can cause a 'fall-out' which we can use beneficially. Remember that the magnet keeps its magnetic polarization even though it may have done some work and it has its own way of recovering naturally. Our task is to work out how to exploit the energy released in a way which allows us to refuse to give it back, or renders us unable to give it back because the energy has been spent, whilst leaving the motor magnetism to recover its equilibrium by drawing on its own reserves in what is known as a 'magnetocaloric' thermal action! It is not easy and not normal practice to calculate energy deployment step-by-step in a real motor without begging the question and assuming non-thermal energy conservation. Designers only think of heat problems in relation to I2R losses and hysteresis loss and do not factor into their design the magnetocaloric effects which are intrinsic to actions where the strong fields of permanent magnets play a special role. Being blind to this possibility they would have little patience with the questions raised by Frank Potter, but his approach is to present a design configuration which, though still far from posing an easy calculation task, nevertheless is one that is amenable to definitive calculation. It is this that characterizes the Potter approach. If the calculation can be done, it should be done and the energy deployment traced step-by-step. There is, as already noted, something special about a permanent magnet. It has an endurance when confronted with moderate demagnetizing fields and not enough is said in textbooks about the real action that underpins that endurance. Giving reason for what is known as 'coercive force', is not tantamount to explaining how a magnet sustains its polarization, even though one can draw a line through a stable state represented in a quadrant of a B-H magnetization loop. Indeed, harping back to the Adams motor, and noting that Adams has used Alnico magnets, one will find that textbook authority on the understanding of the high coercive properties of that particular material reveals some uncertainty as to the physics involved. This author is especially interested in this aspect of the problem, because the thermoelectric conversion devices with which the author is associated as inventor use a laminated structure of nickel and aluminium and exhibit anomalous behaviour in converting heat into electrical action, including the heat-driven internal generation of powerful magnetic polarization. So, it may be understood why the line of reasoning adopted by Frank Potter in his communications in Appendix A has interested the author. Our task is to perform the necessary calculations. One aspect of interest to Frank Potter concerns how a rotating magnet inside a long solenoid of large radius can couple inductively with the windings of the solenoid. There is the question of how a back EMF is generated in that solenoid as the magnet rotates. Potter realises that without a sufficient back EMF there is no adequate way in which energy can be fed into the rotor motion and yet there is a cyclic magnetic field which sets up the forces turning that rotor. Accordingly this leads him to ask for calculations applied to a practical structure of a large solenoid of reasonable length to radius ratio. As will be seen, this author feels obliged to separate that issue concerning back EMF calculation and the large radius solenoid from the more important underlying energy balance question which involves ferromagnetic properties, whether those of a rotating electromagnet or a permanent magnet. However, before entering the calculation phase on that lesser issue, Frank Potter's question which relates more to the practical prospect of an operating Adams-type motor will be introduced. Axially Reciprocating Magnet in an Cyclically-Excited Solenoid If one has a permanent magnet and a soft iron core of an electromagnet mounted coaxially side-by-side in-line within a solenoid and the soft iron core constitutes an electromagnet which can reciprocate axially to open or close a gap between it and the permanent magnet, so one can imagine a motor which operates by magnetizing the electromagnet on the closing half-cycle of the motion and demagnetizing it during the opening half-cycle of the motion. This is depicted in Fig. 2.
http://www.aspden.org/reports/Es4/esr4.htm
3/1/2008
Page 6 of 21
Fig. 2 Reciprocating magnetic reluctance motor In an Adams-type motor the action just described is reversed in the sense that there is no electromagnetic excitation during the closure half-cycle but there is magnetization of the electromagnet in opposition to the field direction of the permanent magnet during the opening half-cycle. However, the calculation task posed by Potter is much the same for both of these configurations. Preliminary Remarks In approaching the question of calculating the actions in which Frank Potter has expressed interest, the author is mindful of the mathematical analysis which he has prevailed upon others to perform and Potter's problem of understanding the methods they used. A valid and correct answer expressed in a 'bottom-line' formula is not convincing to someone who has approached the problem along a different intuitive route and hopes to match the result with that personal perception of what is involved. Yet, one can perform calculations in electromagnetism by using magnetic potential techniques or by routine calculation of inductive couplings or by methods involving systematic field calculation and flux linkage rates of change to determine EMFs. All of these methods give the same results because electromagnetic theory is selfconsistent and its techniques are well-established. It is just a question of deciding what form of answer one seeks, whether in terms of energy, force, EMF or whatever. Also, in performing calculations one either has to adopt special finite element methods of computation and pursue rigorous computer analysis or make simplifying assumptions, such as apply, for example, to uniform current excitaton of infinitely long solenoids or solenoids of finite length with simplified geometry for the component acted on within that solenoid. The object of the exercise, however, is to present a case which Frank Potter can understand and verify from his own position, directed essentially at the key issue of the energy deployment. Frank Potter has expressed a desire to see calculations which derive EMFs in terms of field actions and motion affecting field rates of change. In energy analysis he wishes to see inductance energy calculations rather than magnetic potentials. He further insists that the calculations conform with orthodox physics, meaning that the basis of communication has to be that generally accepted. The latter, of course, is the only way in which one can develop a valid basis for any research in this field, but the concern is understandable because the author has given reason in ENERGY SCIENCE REPORT NO. 1 for interpreting energy storage by inductance as a vacuum field reaction. However, that development concerned causal features underlying theoretical physics, a topic touched upon in APPENDIX C, and it in no way affects the proven principles of physics as applied to calculating closed circuital interaction which is the subject now under study. Within these constraints, this author offers the following sequence of argument to set out the scope of the investigation here reported. The text used is written as if addressed directly to Frank Potter. Note that the question of the effect of expanding solenoid radius will be dealt with before the primary issue of the basic motor operation. It should be read after some scrutiny of the subject of the Potter correspondence as set out in Appendix A and Appendix B. Step-by-Step Analysis of the Problem 1. Since your ultimate objective is to determine whether energy is conserved rather than determine EMFs or forces, the logical method of analysis is to work directly in terms of deployment of field energy density. This does not preclude calculation of back EMF generated in the magnetizing solenoid, especially if there is intention to perform an experiment to rotate a magnet inside such a solenoid and measure that EMF. However, some general conclusions from this analysis need to be developed first and this is best done in terms of energy as such. I intend to avoid what is known formally as 'magnetic potential' but will need to distinguish energy of a form that seeks to decrease from that which involves a tendency to increase. Thus I will need to refer to the former as having a 'potential' character and the latter as having a 'dynamic' or 'kinetic' character. The way to look at this is to say that if one pushes a ball up a hill it will have a higher potential energy at the top of the hill but as it rolls back down the hill that potential energy reduces as energy transfers into a kinetic form. Magnetic field energy is energy of motion. If we try to describe it as having a 'potential' then we need to bring in a minus sign to convey the message that it tends to increase in magnitude. This is a subterfuge of modern physics. If one seeks to work with equations and wishes energy change to relate to force it becomes a problem if energy of different kinds has to be put on opposite sides of the equation. One wants all the energy terms to be on one side so that the other side is left clear for symbols relating to force action. By making magnetic energy 'negative' it can be deemed to have a 'potential' alongside electric field energy, but one does see a perplexing anomaly in this area when http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
Page 7 of 21
applying Maxwell's equations to a propagating electromagnetic wave. Here there are no forces on empty space and so, given that energy is assumed to propagate with the wave, physicists need to think of magnetic energy as positive in a real sense. The alternative to this is not something we should discuss here, but if that energy were seen as 'negative' in potential terms or as exchanged with electric energy when expressed by real, positive and dynamic terms, so an electromagnetic wave would, in theory, not transport energy by waves as such. Indeed, one would then have to think of the momentum transfer by photons and see the waves as the catalyst in conveying information about the energy activity in a universal standing vacuum energy field. All this is a little complicated but there is an underlying consistency with the prospect of there being a standing energy background. I refer to it because you have urged a need to comply with Maxwell's equations and, if taken literally, that may put the argument in a straight-jacket. I will proceed therefore without further mention of Maxwell's equations but I will comply with the standard teachings on the subject of electromagnetism because, as you may know, most electrical science textbooks adequately cover the basic ground that applies to power circuits before worrying about wave propagation and bringing in the Maxwell wave formulations. 2. Remember now that two magnets attracted into close proximity will exhibit strong field interactions. They have a way of increasing the strength of the magnetic field and, in energy terms, to make sense of this, one must see the action as a dynamic effect arising from charge in motion. I will address first the problem of the magnet mounted to rotate within a long solenoid excited to produce a uniform internal magnetic field of intensity H which is reversed cyclically so that the system works as a motor. 3. If the magnet has an intrinsic strength that is constant and independent of the field H and is orientated with its north-south poles producing a field opposed to H, the magnetic energy of the system will be lower than for the pole orientation the other way. The potential energy will be higher. The energy difference between the two orientation directions is simply a measure of the amount of energy fed into the solenoid every half cycle as needed to run the motor. There is no reason whatsoever to suspect that there can be non-conservation of energy. For example, if the magnet itself produces a field component H' at a point in the solenoid, outside the body of the magnet, the energy density there will be proportional to (H'-H)2 and when H' reverses as the magnet rotates to a corresponding reversed position this will be (H'+H)2. The difference 4H'H, when summed within the space bounded by the solenoid, is a measure of the work fed into the solenoid as the magnet is primed to reverse direction. 4. Now, it might seem that I have made this assertion blindly, based on the principle that energy is conserved and not by proving my case, as by calculating the back EMFs induced in the solenoid and then merging this with solenoid current over the half-cycle period to evaluate the energy input. However, let us examine what happens to the mutual interaction component field energy term 2H'H when we reverse H. Note that this applies to the permanent magnet rotor situation. 5. At the point in the field under study, H' is constant and so all the mutual action depends upon the reversal of the current in the solenoid. This current change occurs with no back EMF attributable to induction produced by change of H'. Therefore, in theory at least, there can be no power input surge accompanying that current reversal in the solenoid. How then does the solenoid drive the motor? The answer lies in the fact that H', as a component in the H field direction, increases in that forward direction of H as the magnet turns through 180 degrees. This increase in the H' component, as seen by an imaginary loop circuit at the field location, develops a back EMF which interacts with the now-constant field H to put all the work action onto the power supplied to the solenoid. Note that the ampere-turns comprising the solenoidal excitation operate to produce a uniform magnetic field H within that solenoid and so can be said to comprise numerous contiguous loops of current all having the same current strength per unit length of solenoid. Any back EMF in each component loop which tends to resist the setting up of the field by the current is overcome by the forward EMF transmitted from the solenoid through contiguous imaginary current loops that fill the space within the solenoid. Without such action there would be no basis for explaining how it is that a uniform field component H can be produced and sustained within the solenoid when current is fed into it. I have enlarged on this theme in Appendix C so as not to detract here from the flow of the argument. 6. Consider now the electromagnet rotor. Here, at the point under study, when H reverses, so it is that H' also reverses, but in this case the mutual energy density in the field becomes proportional to H2 because H' is proportional to H. We are assuming that the core has a constant magnetic permeability over the range of magnetization used. In order now to operate the device as a motor we must cause the rotor to turn through 90 degrees with H zero and then switch the power on for the next quarter turn to bring the rotor into line with the solenoidal axis before repeating the action and having a quarter turn with power off followed by a quarter turn with power on. See Fig. 3.
3/1/2008
ENERGY SCIENCE REPORT No. 4 Fig. 3
Page 8 of 21
Here, the same argument about back EMF applies, because H' is Hcos, where is the angle between the rotor axis and the solenoidal axis. At the moment when is 90 degrees we switch on the current, but the H' component is then zero and so there can be no surge of power drawn from the solenoid or the rotor core at the moment of switch-on, at least so far as feeding the mutual interaction field energy as opposed to the self-inductance field energy. What then happens is that the rotor turns so that the magnetic interaction field energy density increases, but this again sets up the back EMFs in those imaginary current loops that make up the whole solenoidal field and put load on the forward EMF applied to that solenoid. The back EMF is proportional to the factor used to express the added field strength attributable to the magnetic properties of the rotor core. 7. It would seem therefore that the electromagnet rotor case just discussed is one that requires all the motor operating power to be fed in as current overcoming a back EMF induced in the solenoid. It is pertinent to mention that an electromagnetic rotor core can, in theory, be regarded as one of infinite magnetic permeability without changing this argument. The field action in the free space around the rotor is what is governing and that magnetic core will only accept the H' polarization governed by H if H does all the work of overcoming the back MMFs (magnetomotive forces) that apply in the demagnetizing sense in the pole regions. 8. To this point, therefore, there seems no case for suspecting any non-conservation of energy in motor operations for either forms described, but it is stressed that we have not gone out of our way to design a motor that makes unusual demands on the magnetic core and have applied basic physics to proving the case based on back EMF argument, as requested. Although those actual EMF values have not been calculated they are readily deduced, given the necessary design parameters and by working backwards from knowledge of the solenoidal current and the principle of energy conservation. See, however, the alternative treatment in Appendix D. 9. The next question at issue is the problem of how the motor functions with H being the same regardless of whether we use a solenoid that is very large in radius relative to the dimensions of the rotor. The thought that it might be impossible to justify the back EMF and solenoidal power drive coupling if the wire comprising the solenoid is far removed from the rotor is certainly thought-provoking. I would certainly expect the motor to run with the same performance regardless of the radius of the solenoid, if one could ignore I2R losses, as you assume. However, though it might seem questionable, I hold to the view implicit in the above argument, namely that the back EMFs in those imaginary current loops in the solenoidal field are propagated back to the solenoid proper so as to prevent the vacuum field from becoming one turmoil of eddies and vortices responding to local EMFs induced in space. Again, I refer to Appendix C. I stress here that it is an experimental fact that EMFs can be induced around loops which are not bounded by wire. A closed circuit through a conductor is not essential to define the action of an EMF. One can have partial EMFs acting around parts of circuits and these can vary in two identical halves of a circular wire loop embracing a varying field. The experiment is one discussed on pages 119-120 of my book MODERN AETHER SCIENCE. 10. The suspicion that the EMF needed to power the solenoid has to be weaker because the wire is removed from the magnet cannot be supported. The reason is that the physics of the probem is governed by energy supplied to the solenoid to meet the field requirements. The minute back EMF in each cm length of each turn of the wire in the solenoid is balanced by the inversely proportional increase in the overall circumferential length of that turn. 11. The question raised about calculating the actual EMF conditions in a system having a fixed ratio of solenoid radius to length, but on an increasing scale in relation to the rotor size, is one that I aim to avoid because I see no end purpose of value. I will, however, argue the case for a limiting situation, which applies regardless of the extended dimensions and shape of the solenoid. Refer to Fig. 4 and imagine (a) that the rotor magnet and its field H' are confined to a spherical volume of fixed radius in which it interacts with the uniform solenoidal field H and (b) the separate remaining region of a non-uniform field H within the solenoid of bounded extent.
Fig. 4 The total field energy in the latter region (b) will not vary with change of orientation of the rotor magnet whatever the solenoid radius, whereas the total field energy of the former region (b) will so vary but will not vary with solenoid radius. Accordingly, the back EMF induced in the solenoid will not depend upon that radius and the motor will operate at the same power rating set by H and its reversal frequency. 12. There is, therefore, no valid basis for suspecting that the change of radius can cause non-conservation of energy and any calculation by EMF or magnetic potential methods is bound to give the same result, because the latter are based on magnetic induction principles which derive from the changing values and disposition of the field energy density. Of course, owing to self-induction effects, the cyclic switching of current will prove more difficult with the much larger solenoid, but that is a practical consideration not http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
ENERGY SCIENCE REPORT No. 4 relevant to the problem under discussion.
Page 9 of 21
13. The important point so far as the permanent magnet rotor is concerned, however, is that the magnetization-demagnetization sequence has been symmetrical in its action and energy has merely been 'pumped' from the solenoid current source to the motor output in both half cycles of this sequence. The scenario can be entirely different if the solenoid closely embraces and contains the permanent magnet fixed in a coaxial position with an air gap interfacing with a coaxial soft iron core that can reciprocate mechanically to drive a motor steam-engine-style via a connecting rod and flywheel. 14. However, let us first discuss a situation where the solenoid, as before, contains a rotating magnet but in addition also a non-rotating soft iron core or, alternatively, a rotating soft-iron core and a fixed permanent magnet. Here we are looking at the prospect of using the primary solenoidal magnetic field H to produce a controlled magnetic field in the soft-iron core which then regulates the interaction with the permanent magnet resulting from rotation. The problem becomes that of a three-part interaction. 15. Now, contrary to the prior situation, where the electromagnet had to turn through 90 degrees without power input and then be driven by power input over the next 90 degrees of motion, we can have here a situation where the permanent magnet does all the work in driving the motor in one quarter cycle and the input power operates to weaken the electromagnet in the next quarter cycle. This brings the problem closer to the Adams motor principle. The question then at issue is the calculation of the energy needed to be supplied as input in relation to that of the drive generated by the magnet, bearing in mind that rather special interactions between two ferromagnetic cores are now at work. This is not a proposal raised by the correspondence but it warrants consideration as part of the analytical treatment of the question that has been raised, because the same analysis applies to the reciprocating machine of Appendix B. 16. The key mathematical exercise is that of calculating the energy fed by solenoid current in setting up H in the system shown in Fig. 5.
Fig. 5 The magnet is itself equivalent to an air-cored solenoid carrying a constant current Io and the soft iron core defines a region of constant permeability . The field action of the primary solenoid current upon the permanent magnet can be ignored in this analysis, at least initially, because the coercive force of the magnet material is so high that a relatively weak magnetic field could hardly affect its action. The soft iron core can, therefore, itself be replaced by a solenoid carrying a current times that in the solenoid proper and we can dispense with the solenoid for the purpose of calculation. We are left simply with the analysis of the interaction between two coaxial solenoids spaced by a gap width d, one carrying current Io and one carrying current I. It is assumed for convenience of preliminary analysis that the radii of these solenoidal representations of the magnet and the core are the same and that the turns per unit length are also the same. 17. Our problem has reduced therefore to that of working out the mutual inductance between two coils which can move relative to one another along the common axis. However, we must be mindful of our objective, which is to see how energy conservation principles apply to this problem. If the only question at issue is whether energy is really conserved we do not need to work out the rigorous mathematical solution giving precise values for the inductances involved in terms of the finite lengths of the magnet and core. 18. As a function of the air gap width d and the radii and lengths of the two solenoids, we could calculate the following quantities Lm, Lc, Mmc, where L represents selfhttp://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
ENERGY SCIENCE REPORT No. 4 inductance and M mutual inductance and the suffix terms m and c apply to the magnet and the core, respectively. The magnetic energy of the system is then expressed as an energy quantity stated in potential terms as: - LmIo2 - Lc2I2 - MmcIoI
Page 10 of 21
This means that if we were to reduce the current we would recover energy because a time differential of - Lc2I2, for example, becomes -L2dI/dt and dI/dt is negative so that the energy change as measured by potential is energy returned. When seen from the viewpoint of the exciting solenoid the factor applies rather than 2 but there is return of energy according to such formulae when current is switched off. 19. Note now that, if d were to remain constant as I varies, the energy fed into or out of these inductances with cyclic change of I is the same on the up-cycle as on the down cycle, so to that extent energy must be conserved by the electromagnetic system. Io is constant. Therefore, if d changes, only the mutual term depending upon d need be considered. This leaves only the term in Mmc as a subject for detailed analysis. 20. Now, we can presume that the magnet and the core, though of finite length are very long in relation to the small gap width d. In this case we can follow standard magnetic circuit theory, where a long magnet has very small demagnetization effects due to free poles at the ends, but we will still develop this to allow for a finite valued ratios of length to radius for both the magnet and the core. Here we are advancing the argument towards a point where we can calculate inductance attributable to an air gap in a magnetic core solely in terms of the field energy known to be stored in that gap. This is a valid proposition in accepted theory because leakage flux is deemed to be minimal and because the gap-dependent inductance energy is nothing other than the sum of the magnetic field energy in the system, this being a quantity that has a negligible component inside iron of high magnetic permeability. However, as that may seem to be an easy way of escaping from the more difficult task of calculating the actual mutual inductance and proceeding from there, I will address the latter problem. 21. First, however, I emphasise that the reason a calculation of air gap energy offers a more direct route to a solution is that the flux density across the gap and through the interface between the magnet and the soft iron core will involve far greater energy density in a unit (vacuum) permeability zone than in the soft iron. The energy density is proportional to B2/ and in the soft iron will be very much greater when is unity. Also, it must be remembered that even if a saturation level of magnetism in the permanent magnet implies a low differential permeability, the fact that it is saturated has predetermined the B-dependent energy density value and so it cannot contribute terms that are d-dependent in any significant measure when judged alongside the energy in that gap. 22. Now, having decided to represent the action between the permanent magnet and that of the magnetic core as notional solenoids carrying high currents, one might expect that the mutual inductance between two such solenoids will be very high. A small gap between two sections of a single solenoid does not affect its inductance to any significant degree, but a small gap separating two solenoids that happen to carry very high current can involve energy change in substantial measure. The energy of the selfinductance intrinsic to our notional solenoids is really that of the intrinsic ferromagnetic condition of the magnet and the core and that energy is beyond our reach as it is locked into the atomic quantum behaviour of the atoms of the ferromagnetic material. The mutual inductance energy is what is amenable to our control in our experiments. 23. To provide an interim summary of the purpose of this discourse, it is noted that, whilst aiming to show how the general problem can be analysed mathematically, we are scrutinizing energy conservation processes where we draw motor power from a magnet as the gap closes, then switch on the current I to oppose the magnet's field action across the gap so as to allow the core to be pulled away from the magnet with little energy demand. We expect, on basic physics teaching, to find that we must do work against a back EMF to achieve this condition, work exactly equal to that available from the magnet upon closure of the gap. However, we want to be sure that the accepted theory, when worked out in detail, does sustain this standard energy conservation assumption. Our hope, of course, if we are minded to probe new ground in the search for new energy conversion discoveries is that the energy books will not balance and that we might tap some of that thermodynamic energy resource which powers ferromagnetism at its quantum atomic level. 24. To proceed, the route to determining the mutual inductance will start from the formula for self inductance of a single solenoid which we will then divide into two sections. By way of reference the author will take as a base the textbook 'Electrical Measurements and Measuring Instruments' (3rd edition) by E. W. Golding. It was published in London by Sir Isaac Pitman & Sons Ltd in 1946. It happens to be the university textbook used by the author in his early studies and similar reference data is probably available in other and more recent works, though there is a secondary reference to 'Nagaoka Factors' which feature in a paper by Nagaoka, Journal of College of Science, http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
ENERGY SCIENCE REPORT No. 4 Tokyo, Art. 6, p. 18 (1909) and the data from the latter may be difficult to trace.
Page 11 of 21
In any event the calculations pose no problems to modern computer analysis, but it suffices for the present purpose to rely on the textbook authority which is home-based in U.K. and dates from the era when we were both introduced to electrical engineering studies. 25. The self inductance of a solenoid of circular section and diameter a having N turns uniformly wound over a length D is: L = K2N2a2/D nano-henries. This is given at p. 178 of the Golding book and K is the Nagaoka factor plotted in graphs on page 179 as a function of the diameter/length ratio of the solenoid. For the onward calculation we now need to specify that ratio a/D and I will choose here three ratios for which D/a is 20:1, 10:1 and 5:1. The Nagaoka factors are, respectively, 0.98, 0.95 and 0.91. Now, suppose we chop the solenoid in half, notionally, and see it as two coaxaial solenoids arranged adjacent one another with no gap in between. The overall inductance is then the self inductance of each half plus the mutual inductance between the two halves. Note that in energy storage terms, with a current I, the self inductance energy of each half is LI2 and the mutual inductance energy is MI2. So, regarding this as a self inductance energy of a common single solenoid, L of the double length solenoid is 2 (L+M) of the two-part configuration. Thus, if D/a is 20 for the overall single solenoid and 10 for each half, N being double and D being double in the above formula gives 2K, where K is 0.98, as equal to 2 (K+M/L) with K as 0.95, making M/L equal to 0.03, where L is the inductance of the half-solenoid of D/a of 10. Alternatively, if D/a is 10 for the overall single solenoid and 5 for each half, we find that 2K with K as 0.95 equals 2(K+M/L) with K as 0.91, making M/L equal to 0.04, where L is the inductance of the half-solenoid for D/a of 5. 26. We have now determined the mutual inductance between two sections of solenoid of equal length and, as this holds regardless of the currents in the two sections, we can say that the mutual inductance energy is MIoI, where, according to the choice of D/a ratios, M is 0.03 or 0.04 times the value of L as given by the above formula for the separate sections. 27. This is the amount of energy that can be expected to be extracted by the mechanical pull as the core is attracted from a well separated position to close the air gap between it and the magnet. The formidable question now faced is that of deciding how energy is deployed if we decide to alter the current excitation so as to demagnetize the core before separating it from the magnet. 28. To proceed, we need to enter the territory of field effects from free end poles of a magnet. Suppose that the magnet exists at rest inside the solenoid and no current I is fed to that solenoid. The core is initially at rest spaced from that magnet by the gap distance d. The magnet, unaided, will assert an attractive field which pulls the core into contact. This field will be deemed sufficiently strong to impart substantial polarization and set up a fairly strong level of magnetism in the electromagnetic core. Thus, even with no external exciting current present, there is an effective polarization current in the core of the order of Io/, because the magnetic flux traversing the air gap will be the same on both sides. On this basis we can confine our study of power input to the task of demagnetizing the magnetic core once it has closed into contact with the magnet. We divert therefore to the study of this problem. 29. We have, in effect, a magnet and we have put, as an extension of its length, a soft iron core in contact with it. This means that the magnet will transfer an end pole from itself, and through the core to its outer extremity. The magnet with a D/a ratio of 10:1 becomes, say, an extended magnet with a D/a ratio of 20:1. The question at issue now is that of contriving to drive that pole back to the original position in the magnet proper and before we separate the core from the magnet. Here, we need to keep in mind that a soft iron core needs very little field to determine the direction of its magnetization. The reaction owing to demagnetization effects set up at the free end poles is what makes the demand on any applied field. So, if we look to a mid position inside the core and ask how the adjacent magnet and the pole demagnetization effects and any external field cooperate in deciding a direction of magnetization, we can begin to see what is needed. 30. The demagnetizing field effective on a magnetized bar and equivalent to the offset needed in a magnetizing solenoid is known from data of demagnetization factors found in textbooks. The Golding book referenced above shows such data at p. 360. For D/a of 20 the demagnetizing field intensity is 0.5% of the flux density and for D/a of 10 it is 1.6% of the flux density. http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
ENERGY SCIENCE REPORT No. 4 Now consider what this means in terms of controlling the magnetic flux density through an air gap between the magnet and the core.
Page 12 of 21
Firstly, those demagnetizing factors apply to specimens that are not permanent magnets, so response to externally applied magnetic fields cannot be predicted so far as action within that magnet is concerned. Secondly, the soft iron core will respond to net field action and if it were replaced by air we see that the additional demagnetizing field effect that comes into play is about 1.1% of the flux density in the magnet, this being the difference between the two demagnetizing factors. This suggests that, even if the soft iron core were left in position, the additional application of a back field of the same amount, or possibly more corresponding to the 1.6% factor, would drive the pole back into the magnet. If this were so, the energy needed to be supplied to the demagnetizing winding would be of the order of LI2 which compares with the mutual inductance energy of 4% of LIoI. Remember then that Io is of the same magnitude as I and that as it applies here is the magnetic permeability of the soft iron expressed in gaussian units, meaning that it is of the order of 103. Very clearly, on this basis, it needs far less energy to demagnetize the core than we have available as mechanical work from the action of the magnet in closing the air gap. The above figures suggest an energy ratio of the order of 1:100. But are we right in this argument? 31. Firstly, let us assume that we have a correct analysis. What does this mean in terms of energy conservation? Since energy has to be conserved in any physical process it simply means that the magnet can stand up to the demagnetizing field set up by its free poles by calling upon its atomic quantum-powered sources to keep it ferromagnetic, meaning that it gets energy from a thermodynamic interaction with the quantum world. Alternatively, if it owes its permanent magnetism to some internal thermally-related activity, it may simply cool to sustain the magnetic requirement. That may be speculation, but one fact we do know is that the magnet has a way of recovering once we pull away the demagnetized core using very little effort and prior to switching off the demagnetizing current. Secondly, let us assume we are wrong, but then how do we know? We set out to calculate the effect of a magnetizing field on a magnet and a soft iron core and we encountered the problem of deciding how the field set up externally from the free poles of the magnet affected the soft iron core. We had to estimate the back field needed to counter that influence. We know that the free magnet sets up its own back field and have used that as a measure for our calculations. If this is wrong how else can we proceed? 32. The only sensible way forward from this position is by experiment and already it should be said that I would never have begun this exercise had I not heard of experiments that purport to involve permanent magnets and reveal anomalous gain of electrical/mechanical power. However, I have accepted your challenge to perform calculations which might give you some satisfaction in your pursuit over so many years to find an answer to your questions and although I think I have gone far enough in that theoretical endeavour I will go one step further. 33. We have considered above how two solenoids having a 10:1 length to diameter ratio, one representing a permanent magnet and one a soft iron core, interact magnetically. A question of interest is that of determining what equivalent current strength I would suffice in an external magnetizing solenoid closely embracing the soft iron core to offset and cancel, at the centre of the soft iron core, the magnetic field set up by the equivalent current Io of the magnet.
Fig. 6 Referring to Fig. 6, the task is to calculate the axial field at a point P set up by a current of i ampere turns per unit length of solenoid. We consider an elemental section i(dx)(d) of the energized solenoid and note that this angular element ( radians) of ring form, of diameter a distant x from P along the axis, will set up a magnetic field at P given by the formula (a/2)(idx)/z2, where z2 is (a/2)2+x2. This field is directed at an angle to the axis, where x is (a/2)tan and http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
ENERGY SCIENCE REPORT No. 4 (a/2) is zcos. Then, since dx is (a/2)sec2d or (a/2cos2)d, the component field at P attributable to idx over the = 2 range of the ring element is: (4/a)cos3(idx) and, as dx is (a/2)sec2d, this reduces to: 2icosd
Page 13 of 21
This can now be integrated to obtain 2isin and so determine the axial field intensity at P attributable to the whole length of the solenoid representing the magnet, namely from an angle for which tan is 10 to one for which tan is 30. With tan as 10 this gives sin as 0.995037 and with tan as 30 this gives sin as 0.999445 so the difference is a factor of 0.004408. In contrast the same current in the solenoid centred on P would develop a field at P given by the same formula applied between limits for which tan is 10 and -10, respectively. This gives a difference of twice 0.995037 or 1.990074 as the comparable factor representing axial field intensity at P. The ratio of these two field strengths is 451:1, meaning that the field developed by a powerful current Io in the solenoid representing the magnet could be cancelled at P by an opposing current in the magnetizing solenoid of the soft iron core that is only 1/451 of the strength of Io. 34. It is submitted on the basis of this analysis that it is not at all unreasonable to contemplate that a small current supplied to a magnetizing coil around the soft iron core and directed in opposition to the polarity of the magnet can serve severely to curtail the attractive force between the magnet and the core. This being so there is every reason to expect the motor contemplated to operate by drawing drive power from the magnet and using a relatively small amount of input power to restrain the braking action as the motor reestablishes the gap between the magnet and the core. [This ends the author's formal response to Frank Potter] Onward Experimentation The above discourse has probed the principles of operation of a device which can possibly serve us as a new means for generating power. Machines testing these principles must now be developed to verify what has been suggested by routine application of established scientific principle. The only departure from established physics has been an awareness that there might be a hidden thermodynamic source of energy which could feature in the energy balance calculations, which has meant that we would not rely on taking the short cut of working out our answers by assuming that the only energy action is electromagnetic or mechanical in form. So often, physicists who set out to calculate a result A assume a conservation rule by which A + B = 0 and then calculate B instead. That may well prove to be a very costly mistake that has had a damaging effect on progress in the energy field. One is thereby relying on assumption, albeit accepted doctrinaire assumption, and using inadequate knowledge of the range of the energy components that must be considered. Thermodynamics, meaning the realm of heat energy in some form, even the heat latent in atomic electron activity, is a subject of relevance to electromagnetic machine design that ventures into what seems hitherto to have been forbidden research territory, because, as already stated, researchers fear the stigma of addiction to 'perpetual motion'. Given the kind of question asked by Frank Potter and his persistence in seeking answers after decades of effort, given the motor developments championed by Robert Adams and given the reports of the research of Hans Coler and others on solid-state magnetic devices posing energy anomalies, this author can but share their frustration and this is why this ENERGY SCIENCE REPORT is necessary. One can do experiments, as others have done, but even that will not convince the skeptic who wants to adhere to principles of disbelief. Without a theoretical base moulded around the existing framework of physics one cannot get a hearing, far less attract the interest of those who will advise funding sources to invest in the 'free energy' field. Furthermore one needs a basis on which to understand why those who try to get 'free energy' machines to work may fail. One cannot just throw a pile of magnets together and hope to work magic. It is pointless to take this discussion theme much further, until the necessary experiments have been performed by the author and are duly reported in a sequel to this ENERGY SCIENCE REPORT. Commentary on the Appendices http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
Page 14 of 21
In winding up this introduction to the 'Potter debate', a few points outstanding from the correspondence initiated by the Potter letter of 15th October 1993 warrant comment. That letter is reproduced in Appendix A. By letter dated 21st October 1993, Potter, by the following words, acknowledged my expression of interest: "I think I will begin with the phrase in your first paragraph "what you say is right!", which caused me to rub my eyes in astonishment, because it is the first time that any reputable scientist has ever said that to me; not even Professor Kilmister who, although he has been most generous indeed in helping me literally for years past, and has acknowledged that I have been right on some points, is like all mathematicians and scientists extremely dubious about anything touching Conservation of Energy." Later in the same letter: "I was particularly interested in your phrase about a "hidden source that sustains the electron 'spins' in a ferromagnetic material". That is precisely the sort of thing that has been at the back of my mind for a very long time indeed (though I know little technically about 'spin' theory), in fact gradually since 1956. I really got going about 11 years ago with the ideas about which I wrote to you. That was in 1982, which also seems quite a long time ago now, when I approached Professor Kilmister on these matters." In his 15th October letter, Potter had mentioned four issues of debate but disclosed only two. His letter of 7th November began with the words: "Thank you for your further note and the extracts from New Energy News that you kindly sent enclosed. Before going on to some comments upon this very interesting material I would like to present the other two ideas that you said you would be willing to comment upon." "The first one .... involves an experiment. I took a very good quality permanent magnet and wound a close-wound wire coil around it, and then passed a current through it in the opposite direction to that of the current that would have magnetized the magnet. At the start of the experiment, before the current was switched on, there were a number of soft iron tin-tacks adhering to the magnet. I got the result that I had anticipated. On increasing the current there came a point where the tin-tacks flopped off; and on increasing the current still further they jumped on again. All fairly obvious I suppose - the two fields cancelling one another. But the puzzle was this: Energy is supposed to be in the 'field' surrounding the magnet (or the coil), and yet, since the tin-tacks were not attracted at the particular level of current there must have been no field there to magnetize them. But there is energy inside the permanent magnet, and the energy must also have been put into the coil in the build-up of its own energy field, this energy coming from the battery. Where have these two energies gone to? On switching off, pretty obviously these two energies come back, though I was not able to check practically the restoration of the energy of the coil to its surroundings. The magnet appeared to be unaffected afterwards." "The last of the four ideas (two in my earlier letter) depends upon the one just given, and concerns a small machine that I had an idea to build, but the practicalities of doing so were difficult with the tools or apparatus available to me; and also later on a possible snag in the idea occurred to me (which I will mention in a later paragraph); so, after doing practical work upon it, I gave it up for the time being and went over to the two ideas in my previous letter to you. The machine was this ...." This next portion of the Potter letter is in Appendix B. It is a description of what the author has referred to above in the context of a reciprocating steam-engine-style movement of a permanent magnet cum soft iron core combination. As already mentioned, it is what this author had in mind before that first discussion with Professor Kilmister at the Cambridge meeting. However, whereas the opening letter from Potter had concerned the mathematical task of analysing what could be said to be thought experiments bearing upon the conservation of energy issue, here was a third 'idea' raising questions of energy disposition based on an experiment with a magnet and a fourth 'idea' which concerned a machine that resembles the Adams motor. The difference is similar to that between the early reciprocating steam engine and the four-cylinder rotary engine. In the above discourse, the author has already dealt with the themes Potter raised by his first, second and fourth 'ideas' and wonders now whether to comment on the magnet experiment of that third 'idea'. The disposition of energy when work is done to 'demagnetize' a magnet has already been discussed in this Report. We are talking here about the physics of the process at room temperatures, temperatures well below the Curie temperature. In this situation one never demagnetizes a ferromagnetic substance, whether it is a permanent magnet material or soft-iron. All one can do is to 'depolarize' the specimen under test. Its intrinsic minute magnetic domain constitution becomes randomly directed amongst the axes in the crystals of the material and it merely appears to be demagnetized. So, the primary energy is always trapped by the ferromagnetic state and any modest change that does occur involves, to some extent, that which can occur at the limits of transition as one takes the magnet through its Curie temperature. There is a thermodynamic energy exchange involving that hidden field we associate with quantum theory. As to why Potter's magnet recovered its polarization after undergoing the 'opposed' current effect, as tin-tacks fell off and were picked up again, that is not easily explained without knowing precisely the properties and state of the magnet and the sizes of magnet, demagnetizing coil and current in that coil. http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
Page 15 of 21
If the magnet reversed its polarity it is perplexing if it could reverse back again when the current was switched off. It could not have been one having a high coercive force if a small coil carrying current available from normal domestic sources could perform that polarity reversal function. If, however, the coil wrapped around it did extend, in its influence, to the tin-tack region, we may have here precisely the evidence that shows how a weak field on a soft iron core can affect the attraction of a magnet. In the latter case the commentary above and the calculations which show how a small field action can limit the influence of a magnet interacting with a soft-iron core are very relevant to Potter's tin-tack experiment. By letter to the author dated 23rd March 1994, Frank Potter acknowledged certain book references that I had sent him showing methods of calculating mutual inductance and included the comment: "The interesting, but to me difficult, calculations that you sent (though, as you say, routine for engineers) are in particular for self-inductance and a lot about mutual inductance. The specific problem that I and my friends have struggled with for so long is not that, but rather the induction of EMF by a rotating permanent magnet --- in other words 'back EMF' in a rather special form of motor. This EMF is the thing that seems so difficult to get an exact answer for in this case; and the specific problem is whether the EMF does depend upon the ratio of the length of magnet to the radius of the solenoid. I think it does. I have, as you know, been hankering after a calculation on the basis of the Blv formula; but I shall be most interested in your own calculation, when you can do it, and I can only hope that it is as 'routine' as the ones you kindly sent me." Upon reading this this author wondered about the emphasis placed on the ratio of the length of the magnet to the radius of the enclosing solenoid. In earlier communications the question had been understood to relate to the problem of using a solenoid of realistic (not infinite length) proportions, whilst increasing the radius of the solenoid, but at all times the magnet itself has to be 'within' the solenoid. In other words one should not just imagine something approaching a ring coil with a magnet mounted to rotate about the centre of the coil and having its poles sweeping through an arc protruding from the plane of the coil. Accordingly, it was assumed that Frank Potter was primarily interested in calculating the EMF induced in a solenoid by a rotating magnet having a length that is small in relation to solenoid radius, but yet the length of the solenoid is large enough for it to be said that the solenoid encloses the magnet fully. In other words one seeks to rely on the assumption that the field produced by the solenoid and acting on the magnet is essentially that applicable at the centre of the solenoid. On this basis, of course, one must surely agree with Frank Potter that the back EMF induced in the solenoid owing to rotation of the magnet does depend upon the radius of the solenoid. As to the calculation of this EMF, this poses no real difficulty, but in view of Frank Potter's concern about method of calculation and his apprehension about mutual inductance formulae, the author has deemed it appropriate to provide the additional analysis set out in APPENDIX D. No doubt there will be others who read this Report that have interest in the general problem but are not too familiar with the various methods of calculation that can be used in electromagnetism. Between 7th November 1993 and 23rd March 1994, and later, Potter wrote many further letters to the author prior to completion of this Report, mainly to be sure that his questions were fully understood and revealing his anxiety that, having found someone willing to resolve the issues raised, the main points would not be missed. The other letters bore the following sequence of dates: 26th December 1993 and, in 1994, 14th January, 16th January (two letters), 19th January, 8th February, 26th February, 1st March, 7th March and 7th April. The 23th March letter was followed by one dated 2nd April. All related to the general topic of the four 'ideas' that have preoccupied Frank Potter for so long and all were written before any of this author's response, as provided by this Report, was conveyed to him. It will, therefore, be appreciated by the reader that this question of whether a magnetic machine can be operated in a way which breaches the Principle of Conservation of Energy, as interpreted in the realm of electro-magnetism and mechanics, is one very close to the heart of this 83 year old gentleman. His letters, as quoted, should show the reader that Potter is not a 'crank' experimenter who believes in 'perpetual motion'. No doubt, much that has been said in this Report will not be easy to digest and there will be more that has to be said. The author has suggested to Potter that he should await events and see how the 'free energy' world that is now addressing similar issues progress with the experiments on new machines. Not surprisingly, Potter wants to keep involved and contribute to the momentum of something affecting his brainchild. However, there are limitations in what one can do in a disbelieving world that is competitive in matters scientific and so this Report can only serve to introduce Potter's interest to those few who may read what is said here. It is hoped that the 'Potter debate' will arouse interest and lead to progress on the alternative energy field. In bringing a different perspective to the present scene, perspective which complements the ongoing debate that now centres around the claims concerning the Adams motor, hopefully something of benefit will emerge from what this author is contributing by issuing this Report. This author acknowledges Potter's kindness in allowing this material to be presented in this Report form, with text from his correspondence, and ends by wishing him well in his further endeavours, coupled with the hope that he will see feedback as others now take up the debate. 10th April 1994 HAROLD ASPDEN
3/1/2008
Page 16 of 21
APPENDIX A LETTER DATED 15 OCTOBER 1993 FROM FRANK F. POTTER Dear Dr. Aspden I hear from Professor C. W. Kilmister that during a discussion with you at Cambridge some weeks ago he mentioned to you my name and my interest in Magnetism and particularly in Conservation of Energy. He did not know your address at the time, but a few days ago he found it and sent me a most interesting letter stating that he had heard from you that some experiments with permanent magnets in USA appear to indicate that energy may not be conserved in some of the phenomena involved --- very remarkable news! He also said that Magnetism is a subject in which you are an expert, and that he thought you would be willing to hear certain ideas that I have upon these matters concerning Conservation of Energy, particularly in relation to Magnetism. So these are the reasons for my letter. For myself, I have (very unfortunately) had no formal training in Science or Mathematics beyond school days 66 years ago, my work having been mainly in other fields, though I was a sergeant wireless mechanic on Ground Staff of the RAF during the War. Some of my main interests have been in Physics and Electricity and Radio and Mathematics and I have dabbled in these, though all at a rather low level in which I have regrettably had to be largely self-taught, though with some help from a few kind friends such as Professor Kilmister in particular. I am now 83. There are two problems in relation to Magnetism and Conservation of Energy that I have discussed with Professor Kilmister for a very long time; or even three or four separate such problems, but it is two of them in particular that I would like to put to you. In fact, in this letter I will concentrate mainly upon one of them, which I think is much the simpler to discuss, but I will give a brief account of the second one at the end of this letter. I would be most happy to tell you full details of this other one (in fact all four) if you were interested to hear and pursue them later on. But in this letter I am keeping mainly to the one, as I do not want to burden you with a mass of material in which you might not be interested; nor do I want to go to unnecessary trouble myself. Now to the one main problem: Suppose that an electro-magnet is rotating inside and at the centre of a fairly long (i.e. large length/diameter ratio) current-fed stationary solenoid, the plane of rotation being that of the long axis, the cause of the rotation of this electro-magnet being the magnetic field of the solenoid inside itself. In other words, this is a rather special form of electric motor, in which Motor/Generator theory and 'back EMF' will apply. For mathematical simplicity let it be assumed that I2R heat dissipation can be ignored, since that is energy-conserved and 'wasted' only from an engineering point of view; and in particular let it be assumed that both solenoid and electro-magnet each have their current maintained constant by a separate 'extra battery' in series with the one heating the coils, these extra batteries in this 'thought-experiment' being infinitely and instantly adjustable to oppose exactly the EMFs that will be induced into both solenoid and electro-magnet by the fact that each is moving, relatively, in the magnetic field of the other. This will maintain constant current in both. (To ignore the I2R heat dissipation one could imagine super-conducting circuits). Now suppose, as one would be expected to do, that in this electro-magnetic arrangement (really a special type of motor) energy is exactly conserved. I found it more difficult than I had thought to work out just how this would be, partly because at the end of each half-cycle of rotation the constant currents (or anyway one of them) would have to be switched off for reversal of direction, and the energy 'stored' in the magnetic fields of the two coils during the momentary buildup at the start would need to be 'recovered' from the collapsing fields (or one of them anyway), and whether to switch off both or only one current, and if both in what order or together, and in particular the fact that at the end of the half-cycle the electro-magnet coil would be physically the opposite way around from what it was at the beginning. I found this all rather confusing to try and think out; so let it be assumed that these are just two of Maxwell's interacting currentfed circuits in which energy is conserved overall if everything is accounted for. One important point of my argument revolves around the fact that both of these current-fed circuits are moving in the magnetic field of the other, and as such (a) both coils will experience a force from the other one, but, the solenoid being stationary in the laboratory, the free electro-magnet will be accelerated and will gain kinetic energy from the arrangement; and (b) both coils will induce an EMF (countered by the two 'extra batteries' in order to maintain constant currents) into the other coil, so these two 'extra batteries' will lose chemical energy; and since Conservation of Energy is being assumed, these energy losses from the two batteries will be exactly matched by the kinetic energy gain to the mass of the magnet; and moreover, this will not be only over a period, but pari passu, step by step at every moment of the motion. And the energy 'stored' in the two magnetic fields is assumed to be 'recoverable'. As said, all this is really just ordinary motor and 'back EMF' theory in this special case. Now the really essential part of my non-Conservation of Energy argument is this: It is well known that a long cylindrical permanent magnet can be exactly simulated by a piece of soft iron of the same dimensions with close-wound coils around it, fed by an appropriate constant current --- i.e. an electro-magnet such as in the foregoing paragraphs; and if the two, electro and permanent magnets, were put each into a 'Black Box' it would not be possible to distinguish between them, either in their capacity to attract soft iron, or in their capacity, when moving to induce EMFs into surrounding conductors --- provided of course that the current in the electro-magnet were maintained constant against EMFs induced into it by reaction from outside. http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
Page 17 of 21
So the final step in my argument is to replace the electro-magnet in the paragraphs above by a permanent magnet and repeat the experiment. Everything will be exactly the same, except that the permanent magnet, being self-sustaining, will not need to have energy taken from an 'extra battery' to maintain constant current as in the case of the electro-magnet. Hence, Conservation of Energy (whether true or not) having been assumed for the case of the electro-magnet, there is an energy difference here for the permanent magnet, and in fact an unbalanced energy gain. So, how can energy have been conserved in this case? I suggest that energy is not conserved here, and that there is a nett energy gain. Finally, here is a brief account of the other similar but separate problem, about which I am not sending you details (though there is a large amount of it), parallel to the problem described above: The one above was actually the last of the four in time, and arose directly out of the one I am about to mention. But they are in fact two quite separate (though closely allied) problems on their own. Suppose one has an electro-magnetic arrangement exactly the same as above, with a permanent magnet (or maybe it could be an electro-magnet, but let's say a permanent magnet), with as before a solenoid with a large length/diameter ratio. Now the force field formula inside the coils at the centre for such a long solenoid (theoretically an infinite one) is o4nI, which is independent of the radius of the solenoid. Now, keeping everything the same, including the shape of the solenoid, i.e. its length/diameter ratio, vary the radius of the solenoid, let's say, make it larger. What will be the effect upon the EMF induced into the solenoid and opposing the battery voltage and taking energy from the battery? The formula above for the force field H acting upon the mass of the magnet and thus imparting energy gain to it is independent of radius as above. If the EMF induced into the solenoid (still the same shape), despite this increase in radius, is still the same, then the drain on the battery and consequent energy loss for a given current will also be the same as before. Then one can say that this energy loss is independent of radius, just the same as the energy gain is independent of radius, and one would have no reason to suppose that energy is not conserved. However, 'common sense' is not always right (!), and the answer is by no means clear. It is a lot more difficult than it looks. A lot of work of various kinds has been done on this (mainly by Professor Kilmister and myself, but one or two others as well), and there is as yet no conclusive proof, either way. One difficulty, a mathematical one, is the absence of exact integrals in working on the problem. I think, on all the evidence available, that energy is not strictly conserved, and that there is the possibility of an uncompensated gain in energy; but I cannot prove it absolutely. As said at the beginning, I would be very happy to send you a lot of detail about this, if you are interested to pursue it, and especially if you could advise or help in the matter. The other two problems of the total of four are related to both of the above, but are each really an independent problem, three of the total indicating the possibility of non-Conservation of Energy, the one other being simply a puzzling electromagnetic problem. I would be most interested to hear from you, and particularly whether you can give any answer to, or throw any light upon, any of the above matters, or help in any way. Thank you for allowing your name to be passed on to me by Professor Kilmister. If in your reply you include any calculations, particularly calculus, would you please set out the steps in full, since my maths is at a rather low level, though I can often follow the simpler calculations, more or less, provided they are set out in detail. I hope I am not bothering you too much over this. No hurry, of course. With best wishes, Yours sincerely, Frank F. Potter
APPENDIX B POTTER'S FOURTH PROPOSAL: THE RECIPROCATING MAGNET ENGINE The following is an excerpt from Frank Potter's 7th November 1993 letter to the author: "The machine was this: A good modern permanent magnet has a close-wound coil wound around it in such a way that current can be passed in the direction opposite to that which magnetized the magnet. Standing at a short distance from one pole face of the magnet is a piece of soft iron, which is allowed to be attracted by the magnet while no current is flowing in the coil. The (potential) energy taken from the soft iron and imparted to its acceleration can be taken from it by some means, say by attachment to a crank and flywheel etc. like an old-fashioned reciprocating steam engine. When the piece of soft iron is stopped at the pole face switch on the current at a magnitude that will oppose and exactly balance the magnetism of the permanent magnet. There will be a momentary build-up of stored field energy in the coil, which can be 'recovered' later. But also, there will now be no field outside the permanent magnet and hence no magnetization of the piece of soft iron and no attractive force upon it, and in particular no loss-producing EMF induced by it into the coils by its motion if it is now drawn away from its starting position, and so no electromagnetic energy changes will take place. The mechanical energy used in accelerating it away from the pole face can be conserved by the flywheel. So, draw the piece of soft iron away to its starting position. There will be no magnetic force restraining it and hence no expenditure of electrical energy (i.e. induced EMF) or mechanical energy (which the flywheel has taken care of) in thus moving it away again. Then switch off the opposing current when everything has returned to its starting position and recover the 'stored' energy in the field of the coils (say by discharging into a condenser or by other means), thus at the same time automatically restoring the soft iron to its original condition of being attracted by the permanent magnet. Repeat the operation continuously, using the flywheel to smooth things out mechanically. It appears that on each completed cycle there is a nett gain of energy, so energy is not http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
ENERGY SCIENCE REPORT No. 4 conserved. Is there anything wrong with that?
Page 18 of 21
I did work on this idea, both theoretically and practically, on and off many years ago in the late 1950s, in between many other calls in a very busy life. But I had to give it up, in favour of the other two ideas recorded in my earlier letter, partly due to the lack of time, but more particularly for two other reasons. The lesser of these was that I was by no means a good enough mechanical engineer to get the thing going, and doing it at home anyway. The greater reason, which was the one that really finally stopped me, at least for the time being, was that a possible theoretical and practical snag in the whole idea occurred to me, and I had not the necessarly theoretical and mathematical (particularly mathematical) ability to deal with it. It concerns the 'recovery' of the 'stored' energy in the solenoid coils surrounding the permanent magnet, and it is this: What is the nature of the whole solenoid itself? Clearly it is not a soft iron cored solenoid, in which self-inductance L would be very much larger than that for the coils alone, because in this apparatus its core is a good modern permanent magnet, in which presumably the billions of molecular iron magnets composing it would have little if any room for motion under the influence of an applied field; and as I understand the matter it is this very freedom to move of the molecules of the soft iron that causes the great increase in self-inductance of the soft-iron cored solenoid over an air cored one. So, in effect, the coils are an air cored solenoid, because the permanent magnet inside them would be virtually unaffected by the current; or even slightly more than that, a vacuum cored one because the volume of the permanent magnet would replace the air. What all this boils down to is that the self-inductance L of the coils would really be rather small, whereas I had I think been viewing it, more or less automatically, as quite large (like a soft-iron cored electromagnet). Now, what follows from this is the relationship of the piece of moveable soft iron into the solenoid. If it were really a soft iron cored solenoid with high L then the position of a relatively small piece of soft iron just outside it would make little difference to its large self-inductance. But in the case of the virtually vacuum-cored solenoid there might be quite a significant relative difference between its rather small self-inductance, say L1, when the piece of iron is at the pole face, and its also small self-inductance, say L2, when drawn away. Hence, keeping the current I constant during the whole half-cycle of withdrawal of the soft iron, and the formula for 'stored' energy of self-inductance being LI2, there would be some difference between the energy put in at the start and that recovered at the end of the second half-cycle, i.e. I2(L1 - L2). So, there would actually seem to be some energy loss here, insignificant if the solenoid were really soft-iron cored (as I had been more or less assuming), but possibly significant as it actually was constructed. So, the final question was whether it were possible and, indeed, likely that this energy loss would exactly balance out the very evident kinetic energy gain that would be obtained on the first half-cycle by the permanent magnet attracting and moving the soft iron? I did not think the loss would be sufficient to balance out completely the gain, leaving Conservation of Energy valid; but I could not be at all sure. So the real difficulty came down to a question of theory, and in particular mathematics, in default of laboratory proof one way or the other. And I had no idea at all what the relative magnitudes were, i.e. whether the figures would be significant or not, and how this difference could be calculated, even possibly by a mathematician, let alone by myself, since obviously it would not be a very easy problem, even for an expert; and I think for many people it would come under your own "sweeping under the carpet" principle (!), assuming Conservation of Energy and thus conveniently forgetting all about it. Naturally enough really; though I would not have been happy about that, but did not know what to do. As said, much later, after a difficult period with other work etc. in my life, I went over to the other two ideas of my previous letter." Though this led into the remark "that explains my four different ideas" this letter from Frank Potter went on for a further four pages on issues such as whether Clerk Maxwell's theories had extended to permanent magnets.
APPENDIX C HOW CONCENTRATED FLUX DEVELOPS EMF IN AN ENCLOSING SOLENOID One needs to explain how a magnetic flux change concentrated in a central core region of the space within a large solenoid can develop induced EMF in the solenoid. It is not a sufficient answer in the quest to explain the nature of magnetic phenomena and induction to say that the EMF is simply the rate of change of flux d/dt enclosed by each circuit loop (or winding turn) of the solenoid. In practice, space itself is, in a sense, a 'perfect' conductor [See footnote at end of this Appendix] in that elemental regions of empty space can be said to be bounded by a closed flow path and any d/dt action in that bounded region will also produce a circuital EMF. Since there is current flow, essential to develop a field reaction, and since no I2R energy loss is involved, we know that either R applicable to the loop is zero or something else is effective to set up a cancelling EMF in opposition in that loop of space. That 'something else' is the circuital component of an EMF set up in an adjacent loop region of space, which, for the purposes of this discussion, is deemed to be subject to its own d/dt magnetic flux exchange process.
3/1/2008
ENERGY SCIENCE REPORT No. 4 For there to be current flow in this adjacent loop and a negligible EMF driving that flow, the R factor applicable to space must be virtually zero as if it were a superconductor, and yet this is not a strict analysis because the space medium is able to sustain oscillations of electromagnetic field.
Page 19 of 21
The current flow in the adjacent loop corresponds to a net zero EMF comprising a component EMF adjacent the inner loop that balances the d/dt-related EMF and a component EMF now in the outer section of the outer loop that keeps the balance. In mathematical terms, imagine a sector of the space within the solenoid to be that of an arc of angle bounded between inner and outer radii r and R, respectively. See Fig. 7.
Fig. 7 Elemental arcuate sectors of a solenoidal field The EMF induced by d/dt in the central core sector with a segment of inner radius r will be: (d/dt)/2 The EMF induced in a closed loop sector between r and R is zero, because all the flux is deemed to be concentrated within radius r. In order that the EMF acting within the inner core sector should not do work on the 'nothingness' of space, the outer loop responds by setting up a back EMF in the arc segment of radius r which is exactly cancelled by a forward EMF in the arc segment of radius R. It is therefore the response of regions of vacuum space in developing circuital loop reaction currents in a non-resitive medium that is the cause of a transfer of action outwards to the winding of the solenoid by virtue of the back-to-back EMF response in contiguous sections of adjacent reaction current loops. Once the EMF finds itself trying to develop current flow in the wire of the winding of the solenoid, then it does meet resistance and normal circuit theory applies, but the action could not occur without the buffer response of virtual current activity in the intervening space. It is essential that this very important point should be well understood as, otherwise, we are left with experimental mathematical formulae that convey no explanation of the true energy activity involved in magnetic inductance. The explanation here is provided because Frank Potter has questioned whether the enlargement of the solenoid radius to realms far removed from the seat of the flux change activity d/dt can result in a restriction on the induced EMF, meaning the back EMF, if the power supplied to the solenoid is what causes rotation of the magnet developing the d/dt flux change. Footnote: Note that each element of a 'perfect' circuit could have inductance L and capacitance C and develop finite currents and an EMF even if resistance R were zero. Each cell of space must be regarded as a parallel-connected LC circuit and, as applied to the vacuum medium with its non-dispersive properties in wave propagation, one also needs a self-tuning resonance effect in response to rates of change of signal disturbances in transit. However, as back-up for this, there is the further property that steady reacting current flow is possible owing to the orbital motion of the vacuum charges in their quantum states. Readers interested in this should refer to the author's article 'The Ether - an Assessment', in the U.K. magazine Wireless World, 88, pp. 37-39 (1982), which discusses the self-tuning property of the vacuum medium. The steady-field reacting current flow has been discussed in ENERGY SCIENCE REPORT NO. 1.
APPENDIX D EMF GENERATED IN A SOLENOID BY A ROTATING BAR MAGNET
3/1/2008
Page 20 of 21
Fig. 8 Reference is made to Fig. 8. The calculation of induced EMF in a coil is based on the rate of change of magnetic flux linkage through the area of that coil. Thus, if the 'coil' is really a rectangular loop with one side of length l expanding outwards at a speed v in a plane perpendicular to a steady field B, the EMF will be proportional to Blv. Alternatively, if the loop area A is fixed so, the EMF induced will be proportional to A times the rate of change of B. The 'linkage' is what is meant by 'mutual inductance', in the sense that, whatever circuit or source produces B, that will have a mutual inductance vis-a-vis the circuit loop of area A. Suppose, for example, that B is produced by a current Io then the EMF induced in the loop of area A will be proportional to the time rate of change of MIo, where M is mutual inductance. To calculate M for a particular interaction one really is doing nothing other than working out how B produced by Io links with an area A. Now, there are two ways of going about this calculation. Because the action is 'mutual' it has a certain recriprocity and one can take either component of the system as the generator of a field B and work out how this links the area of the other component. Obviously, since both must give the same answer for M, by symmetry of action, it is logical to choose the easier of the two possible calculations. In the case of a bar magnet rotating inside a solenoid it is not difficult to proceed in either way, but there is sense in taking the solenoid as the field source. The reason is that the field produced by a bar magnet is that of its two poles and is a rather complex function of magnet length and distance from the centre of the magnet, whereas the field acting on the magnet and produced by the solenoid is a uniform field in the case under analysis. Having in mind that this Appendix is written to meet the concerns of Frank Potter, it is stressed that 'mutual inductance' means just that: the mutual action by which energy can be transferred by induced EMF between two interacting circuit elements is one that works either way with no nett gain or loss of inductance energy. Indeed, if the mutual inductance favoured one or other of the circuit components in this exchange of energy, so one could design a transformer or oscillator that would be nothing other than coils of wire in air and yet would generate electricity continuously without the aid of any external agency. Whilst we do have in mind the issue of energy conservation with the bar magnet itself being a prospective coupling with such an external agency, the problem at hand is one of orthodox electrical engineering calculation of mutual coupling between two circuits aimed at deriving an EMF value. Hence, the logical route to finding that answer is the calculation of mutual inductance M in the problem under study and we shall do this by working out the field linkages from the solenoid to the magnet, rather than the other way around. That said, and referring to Fig. 9, we shall now substitute the rotating bar magnet by a small coil of area A carrying current Iosint so as to produce its field along the central axis of the solenoid and a similar small coil of area A carrying current Iocost arranged at right angles so as to produce its field along a radius vector from the centre of the solenoid.
Fig. 9 Note that this represents a circuit having a magnetic moment IoA which is chosen to equal the magnetic moment of the magnet, the latter being its pole strength times its length. The eventual EMF to be calculated will need to be expressed in terms of this magnetic moment. The action described represents a magnet rotating with an angular frequency . Now, first, looking at the effect which the current Iocost has in inducing an EMF in the solenoid, we can see by symmetry that this is zero, because the field diverges in http://www.aspden.org/reports/Es4/esr4.htm 3/1/2008
Page 21 of 21
opposite directions in each half of the solenoid and so the flux linkages will be such as to develop a clockwise EMF in one half of the solenoid and an anti-clockwise EMF in the other half of the solenoid and these will back against one another to sum to zero nett EMF. Therefore, that tells us that the mutual inductance for the configuration including the cost component is zero. The task next is to calculate the field produced by the solenoid that links with the other notional coil of area A. Let the current in the solenoid be denoted I. If the solenoid were of infinite length then, assuming vacuum permeability o, the axially-directed field intensity in the solenoid is oNI, where N is the number of turns per unit length of solenoid. Note that in the gaussian system of units used elsewhere in this Report the permeability would be unity with a 4 factor added. The flux linking the area A is then A times this quantity and the flux per unit current I is simply AoN, which therefore is the value of M, the mutual inductance. Now, by the reciprocity argument concerning the 'mutual' nature of this inductance, the same value of M applies if we regard the rotating magnet as the source inducing an EMF in the solenoid. EMF is rate of change of flux linkage or M times rate of change of Iosint, which is M times Iocost. The EMF produced in the solenoid is therefore (AIo)oNcost. Had we assumed that the solenoid has a finite length D and a diameter a, then the field at the centre of the solenoid is reduced by the factor D/(D2+a2)1/2, and the EMF is accordingly reduced by the same factor. The derivation of this latter factor can be confirmed from the analysis given in section 33 above. The sine of the angle is the factor just mentioned. It is unity for a solenoid of infinite length. It follows, therefore, that if the radius of the solenoid is progressively increased to a very large value, then provided the length of the solenoid increases in proportion, so the EMF induced in it by the rotating magnet will be unchanged. However, N, which is the number of turns on the solenoid per unit length, must be the same so that the total number of turns must increase in proportion as well, otherwise the EMF will be reduced. In effect, one is here seeing the fact that the field from a bar magnet drops inversely as the cube root of distance, whilst the area of a solenoid turn increases as the square of distance, so unless the number of turns increases in proportion to distance the flux linkage rate will not be sustained with change of scale. Note that this Appendix is added purely to answer a question raised by Frank Potter. It has no relevance to the prospect of building a motor that can conceivably perform anomalously in energy terms, because the interaction under study is the standard interaction between a magnet and a current in a winding. As explained elsewhere in this and other ENERGY SCIENCE REPORTS on magnetism, the prospect of generating what is termed 'free energy' is one that comes into sight where we have a magnet and a ferromagnetic core interacting under the control of a current in an external winding. That is a scenario where the third party to the action disturbs the 'mutual' reciprocal action which otherwise implies symmetry extending to energy exchange processes and it is that which brings a new dimension into energy research.
3/1/2008
1994f
Page 1 of 1
1994f
This is one of a series of 10 Energy Science Reports made available by the author through U.K. company Energy Science Limited, under the publishing name Sabberton Publications. ENERGY SCIENCE REPORT No. 4: POWER FROM MAGNETISM: THE POTTER DEBATE ISBN 0 85056 020 9 This is a 38 pp. report. There are many unanswered questions concerning possible experiments involving magnets as a means for adding power to an electric motor. Frank Potter had struggled to find someone of academic standing who could prove to his satisfaction that what he had in mind would not work. Contrary to orthodox opinion this author supported the Potter case. This report is a preliminary feasibility study based on theoretical analysis of the magnetic actions involved. Much of what is described in this text has bearing upon the experimental findings which are to be reported in later Energy Science Reports, notably in Report No. 7 and Report No. 9. The full text of this Report can be seen via the following link: REPORT No. 4
http://www.aspden.org/papers/bib/1994f.htm
3/1/2008

Power From Magnetism L

Uploaded by

Copyright:

Available Formats

Power From Magnetism L

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Power From Magnetism L

Uploaded by

Copyright:

Available Formats

What is the topic of debate discussed in the report?

What is the topic of debate discussed in the report?

What is Frank Potter's area of interest regarding magnetism?

What is Frank Potter's area of interest regarding magnetism?

ENERGY SCIENCE REPORT No.

ENERGY SCIENCE REPORT No. 4

ENERGY SCIENCE REPORT NO. 4

POWER FROM MAGNETISM: THE POTTER DEBATE HAROLD ASPDEN, 1994

ENERGY SCIENCE REPORT No. 4

ENERGY SCIENCE REPORT No. 4

ENERGY SCIENCE REPORT No. 4

ENERGY SCIENCE REPORT No. 4

ENERGY SCIENCE REPORT No. 4

ENERGY SCIENCE REPORT No. 4 Fig. 3

ENERGY SCIENCE REPORT No. 4 relevant to the problem under discussion.

ENERGY SCIENCE REPORT No. 4

ENERGY SCIENCE REPORT No. 4

ENERGY SCIENCE REPORT No. 4

ENERGY SCIENCE REPORT No. 4

APPENDIX D EMF GENERATED IN A SOLENOID BY A ROTATING BAR MAGNET

ENERGY SCIENCE REPORT No. 4

ENERGY SCIENCE REPORT No. 4

You might also like