Live Line Insulator Washing

Ascotech Sprinkler Fire Engineering And Safety Technology
LIVE LINE INSULATOR WASHING TERGISOL - SYSTEM
Ascote ch S pri nk ler fire engineering
LIVE LINE INSULATOR WASHING SUBMITTED TO ATMOSPHERIC POLLUTION TERGISOL SYSTEM

In todays world of ever increasing power demand foam public and private sector alike, it is vital that electricity supplies are secure and always available. User will no longer tolerate loss of supply with its consequent inconvenience and economic losses power, should be there all the time every time its neaded! The salt of the sea, the sand of the desert, the air pollution wich every developed society produces all settle on exposed high voltage insulators producing leackage currents with risk of flashover and consequent loss of supply. Such residual help the superficial discharge and load a very quick wear out of the insulator. The experience, shown that the most affectives way of evaiding such trouble is still the insulators cleaning, made manually, in order to remove the residual from the surface of the insulator. This operation require skill laboures as well as the out of services eletricity supply with consequent uneasiness for the customer and operator, and heavy cost of maintenance. The loss of supply time to switch off to clean insulator in an even bigger blow to profitability and a loss of credibility of the supply company. Electricity supply contracts may be broken and penalties incurred, and loss of industrial production may lead to an action for damages and the utility itself loses income and profit. The problem has been laid with the first vital condition that the cleaning of the insulator has to be made with the electrical equipment under tension. Consequently the studies have been directed toward the use of an live washing system to guarantee the supply of high tension electric station submitted to pollution. We have therefore decided to go on with research and it will be particularly necessary: to look into the efficiency of the washing varying the water conductivity to obviate the need for large pumping plant and pipe system the insulator or washed in groups or zones completed the washing within 30 to 60 seconds safe system, reliable and quick in operation thus enabling even the largest of substation to be washed within a short period of time, wich may be a critical factor on same sites system works by the controlled application under pressure of discrete droplets of low conductivity water on to surface of an energised insulator, without creating a flashover study of a particular type of spray pattern nozzle, for minimize water usage whilot max using washing efficiency in wich are stressed some proprierties that allow the direct usage on the equipment under tension and make a very quick and a effective cleaning action
Live Line Insulator Washing Equipment has been developed through exhausting research apparts in model substation to allow customer to carry out more efficient, safer and more economical TERGISOL Live Line Insulator Washing. Today, Ascotech Sprinkler TERGISOL Live Line Insulator Washing Equipment, are installed in more than 50 station of salt problem, distributed in Italy and world and givin highly satisfactory performance. Installing a TERGISOL LLIW System will increase the integrity and availability of your transmission system by helping to protect your valuable investment from pollutions. TERGISOL - ASCOTECH Live Line Insulator Washing System have been specifically designed to significantly reducer the risk of flashover by efficiently cleaning the polluted insulators when they are still live. The system is proven for use on electricity lines carrying up to 500.000 volts of current.
LIVE LINE INSULATOR WASHING FOR OVERHEAD TRANSMISSION LINE
Above: 230Kv suspension tower being washed under live Condition.
Right: Typical spray ring on Tension tower.
Above: 230Kv tower washing using small mobile pumping unit and clients water bowser.
Right: 230Kv suspension tower being washed under live conditions.
EXTENDIBLE BOOM HOT LINE INSULATOR WASHER

ASCOTECH SPRINKLER insulator washer truck have been specifically designed to significantly reduce the risk of flashover by efficently cleaning the polluted insulator when they are still live. SOLUTION: Design a truck mounted high pressure washer specifications: SPECIFICATIONS: As hydraulic driven water pump Pressure Flow Temperature Fluid
mod. 7525 65 bar 240 LPM ambient water
BENEFITS: Compact, lightweight mobile unit accommodates the many set-up necessary each day. Dependable, low maintenance operation provide the continuous service needed for the frequent insulator washing. Fast clean done without interruption of electrical services. STANDIN FEATURES: Stainless steel water tank with 6000 lt. Capacity. Hydraulically extended, telescopic booms. Operators work station with fully adjustable seat. Single handle joystick controller for boom operation. Single handle joystick controller for wash monitor operation. Automatic low water shutdown. Water resistivity monitor. Front and rear straight down outriggers, stay within mirrors. Outrigger motion arm. 375 non-continuous rotation. Side water reels with 15 mt. Of hose. Stainless steel plumbing for water system. Tool storage compartment. AVAILABLE OPTIONS: Ratio control system. Hand held wash gun. Increased flow nozzle. Auxiliary hose.
In todays world of ever increasing power demand from public and private sectors, alike, it is vital that electricity suppliers are secure and always available. ASCOTECH SPRINKLER manufactures a range of hotline insulator washing equipment designed to prevent power outage by providing high pressure cleaning of substation, distribution and transmission insulator. Dust, smog, salt or other pollution collect on high voltage insulator. These materials come became conductors of electricity, which will reduce the effectiveness of the insulator and cause problem in electric service such as short circuit. During the dry season, high voltage can require cleaning as after as every two months, depending upon the ammount of rainfall.
TRAILER MOUNTED INSULATOR WASHER
Typical arrangement of pipework and spry rings in transformer bay. Pipework can be arranged above or below ground to suit individual requirements.
Monitoring System
LIST OF REFERENCE
Cliente Impianto Tensione Nominale Kv. 60 150 120 150 65/130 70/120 Nazione Anno Cliente Impianto Tensione Nominale Kv. 110/220 150 150 130 220 220 150 150/15 220 150 165 165 165 165 500 150 220/66 400/230/66/20 Nazione Anno
SME Napoli ESE Cagliari Rumianca Anic Montecatini Enel
Foce Vecchia S. Gilla Carrara Avenza Gela Follonica Cagliari S/S Villasor Porto Empedocle Vetrocoke Margher Monteponi Livorno S/S Porto Torres Ragusa Fusina Fusina S/S Melilli S/S Taranto Mestre
Italia Italia Italia Italia Italia Italia
1958 1960
Hydroelectrica De Cataluna Anic
Barcellona Ragusa Fusina Mestre Melilli Taranto P.to Torres P.to Torres Mers Al Adjad Carbusulcis Abu Nakhlah As Samiriyah Old Airport Al SHalah UB River Ravenna Banias (Syria) Jandar
Spagna Italia Italia Italia Italia Italia Italia Italia Algeria Italia Qatar Qatar Qatar Qatar Pakistan Italia Siria Siria
1982 1983 1984 1984 1986 1987 1989 1990 1991 1991 1993 1994 1994 1994 1995 1998 2003 2009
1960 Montedison 1962 1962 1969 Sava Isab Italsider Sic
Ese Catania Montecatini Montecatini Societ Elettrica Valdamo Stiral Anic Sava Venezia Eurallumina Isab Italsider Eurallumina
70/150 130 70/3 220 150 150 130 220 220 220 220
Italia Italia Italia Italia Italia Italia Italia Italia Italia Italia Italia
1970 ESE Cagliari 1971 1972 1973 1974 Mew Qatar 1975 1976 1977 Enichem 1978 PEEGT 1979 PEEGT 1980 Mew Qatar Ministry Of Electricity Pakistan Sonelgaz Nuova Magrini Galileo Mew Qatar Mew Qatar
PAKISTAN rights 500Kv. support being washed under live condition
QATAR below 166Kv. high level insulator being washed under live condition
ENICHEM RAVENNA below and below left 125Kv. circuit breakers and post insulator washed under live condition
HIGH-VALUE PROPERTY PROTECTION SYSTEM
Ascotech Sprinkler Fire Engineering Cover the whole range of fire risks such as Turn Key fire fighting system
Co2 system
deluge system
sprinkler System
inert System
powder system
foam system
fire & gas detection system
thermal camera detection system
petrochemical plant themal camera detection system
Ascotech Sprinkler S.r.l. Via Torino 56 - BAREGGIO (Milano) - ITALY Cod. Fisc. e Part. IVA 06666990152 - Tel ++ 39(0)2-90361270 Fax. ++ 39(0)2-90361207 e-mail: [email protected]

Live Line Insulator Washing

Uploaded by

Copyright:

Available Formats

Live Line Insulator Washing

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Live Line Insulator Washing

Uploaded by

Copyright:

Available Formats

Ascotech Sprinkler Fire Engineering And Safety Technology