PROJECT PROFILE ON CERAMIC GLAZED WALL TILES

Detailed project Report on CERAMIC GLAZED WALL TILES (Small Scale production Enterprise)

1.Product :- Ceramic Glazed Wall Tiles 2.NIC Code (NIC1998):3.Product Code (ASICC-2000) :4.Production Capacity :2160T/ Capacity per year (Valued Rs. 257.28 Lakhs) 5.Month& Year of Preparation :-11th March ,2011

6.Prepared by :

Br.MSME-DI W.B.S.I.D.C Industrial Estate J.P.Avenue, Durgapur-12 Phone No. 0343-2557129

Introduction: This project envisages production of Ceramic Glazed Tiles which is having a very bright prospect in bathrooms and kitchen in modern housing and in Analytical Laboratories and toilets attached to Railway stations. Due to the liberalized economic policy followed and encouragement by Govt.of India future prosperity of this product in the eastern zone is obviously bright. Moreover there is not a single MSEs in manufacturing ceramic glazed tiles in total Eastern Region which has a vast demand of this product.

Uses of Ceramic Glazed Tiles: Ceramic Glazed tiles are made of porous body with a coating of white or colored Glaze. These are used extensively in the Bathrooms, Kitchen in modern buildings and in Hospitals and Analytical Laboratories, Toiletries attached to Railway platforms. This is because of this products have properties like good resistance to weather and chemicals, having high strength, hard, glossy surface with different colors and pleasing appearance. In the near future the chances for replacing these items by other materials look very bleak. These tiles are rather cheap, easy to clean, have more life and are available in pleasing colours.

Market Potential: The market of ceramic glazed Tiles are very bright since its demand is increasing at a faster rate.The reasons are not far to seek.The improved living standard coupled with good economic situation along with supporting Govt. policies for housing sector speak itself for the demand for these products. Side by side population growth is also creating a positive demand position of these products. These items form an essential and integral part of consuming sector like housing, educational and research institutions, hospitals, Industries, hotels, restaurants, cinema halls and other public places. The demands of these products also increase by the need of renovation works of the old above similar buildings. The housing
2

Development Finance Corporation and other Govt.Corporations and Banks for financing housing will go a long way for the demand of these products.The private sector which accounts for the lions share of the investment in housing and construction is bound to increase further.Further Govt. of India as well as State Govt.is taking more care for the up-keeping of rural sanitation and water supply systems which will indirectly influence and increase the demand of ceramic glazed tiles. Further during the last few years before global economic recession the export opportunities of these tiles from Middle East and Developing countries was very encouraging and hopefully after the recession export opportunities of these tiles will come back.At present there are over 13 Medium scale enterprises and 60 small scale enterprises are in this field but there are no enterprises in Eastern and North Eastern area. The units that register EM-II Under small scale Enterprises will go on enjoying the prevailing State Govt. Incentives and Central Govt. Incentives as per new Industrial Policy 2006.Considering these opportunities new generation entrepreneurs could think of manufacturing this products Glazed Ceramic Tiles

Quality Control and Standards: The raw materials are tested before taken into use for production and after the result is satisfactory they are used .During the manufacturing process quality is checked at the times of grinding ,mixing and pressing .Finally finished products are selected at random and tested to ascertain its asset values with the help of Modulus of Rupture test(MOR), Warpage, Apparent porosity ,Bulk density, Crazing test, Scratch Hardness test on a regular basis as per BIS specification. The standards being followed while making Ceramic Glazed Wall Tiles are: IS : 777-1970 Glazed tiles IS :2840-1965 China clay for ceramic Industry IS :4589-1979 Plastic clay for Ceramic Industry

Manufacturing Process: The raw materials like local clay, Chinaclay, Ball clay ,Wollastonite chips and pitchers are mixed and ground thoroughly to form an uniform slip. They are unloaded in an agitator. The slip is screened, magnetized and kept in agitating tank with addition of required deflocculants . The material is then passed through filter press to get rid of soluble salts to make a plastic body.The plastic body is dried in a dryer to get the dried mass of 5-6 % moisture.The dried mass is subsequently fed into a pan mill. The output of the pan mill is stored in vertical silos.The mixture is now ready for pressing tiles.The pressed green tiles are stacked on the kiln car in a stack of 3 ft.height and dried by using hot waste air from the kiln. The green tiles are dried for 20 hrs.The dried tiles are pushed along with the kiln car and allowed for firing for 20 hrs.The outputs are known as Biscuits. The hot tiles at above 250300C are allowed to cool in nature normally.The cooled tiles when come at normal room temperature 30-40C are screened through online sorting followed by Hammer test and Brushing,water spraying and Glazing.Then the Glazed wares are loaded into refractory cassettes on an endless moving conveyor. The cassettes are loaded onto Glost Kiln car and allowed for firing at a temperature of 1040C for a cycle of 18 hrs. The cooled tiles are unloaded from the cassettes and allowed for online inspection. The tiles are checked into 1st i.e Prime, 2nd as commercial grade, 3rdas Reject Variety. After sorting the tiles are packed and stripped and stamped and sent to stockyard. A single pack of tile weighs 16 kg and ready for sale. Pollution Control: Glaze tile has a share in the present Environmental Degradation. So it is advisable to get NOC from Pollution Control Authority as per statutory norms. In this project it would be better if the installed chimney height is of 30 ft and all the machineries are fitted with pollution arresting measures. Energy Conservation: Considering the fuel reserves and its spiraling price it is essential to adopt energy conservation system by the entrepreneur. The efficiency of a furnace will depend

on how efficient the combustion system is and secondly how best the generated heat is utilized. Energy conservation could be achieved through following process: 1) 2) 3) 4) 5) 6) 7) 8) Complete combustion with minimum excess air. Proper heat distribution. Operating the kiln at desired temperature. Reducing heat losses from the openings. Minimizing wall losses. Waste heat recovery from fuel gasses and utilization for Drying Tiles Control of Chimney draught and kiln pressure Use of lubricants and proper maintenance So the efficiency of a kiln will depend on how efficient the combustion system is and secondly how best the generated waste heat is utilized .So, it is always recommended that standard and good quality of fuel should be used.

Basis & Presumptions: 1. The estimates are drawn for a capacity ,generally considered techno economically viable for a model type of manufacturing unit. 2. The cost in respect of office space,auxiliarymachineries,raw materials and the service charges are generally considered the market value prevails at the time of preparation of the project report and may vary depending upon various factors. 3. Salaries and wages to be given to the officers and employees are in accordance to the present wage structure of Govt.of West Bengal. 4. Considering inflation rate and present Global economy condition interest rate for Term Loan and Working Capital Loan are considered to be @ 16% per annum 5. Margin Money from the promoters will be 25% for fixed Assets and 25% for working capital 6. Calculations have been made on the basis of three shifts operation and at 60% capacity utilization initially.

Project Implementation: It is expected that nine months will be sufficient to complete all activities of the project till commercial production is achieved. Infrastructural Facilities: 1. Power 205 h.p of power will be required for this project.The entrepreneur should approach appropriate authority accordingly. 2. Raw material availability : Except one raw material from Janshi and other raw material are locally available. 3. Water: Sufficient water @ 10KL will be required daily and suitable bore water will suffice if normal supply water from corporation is not available. 4. Transport: The unit should be in a place where it should be connected with road and Rail transport, so that there should be no problem in arranging raw materials and also dispatches of finished products. 5. Man power: Total man heads requirement for this project will be around 20 and since it is an established technology and as such there will no problem in getting suitable manheads for this project. 6. Registration & Licenses: The entrepreneur should obtain all relevant registration from DIC and other Govt. offices before commencement of business activities. This is must. 7. Pollution : There will be no harmful disposal of effluents .However entrepreneur should obtain NOC From pollution control board as per statutory norms. Preoperative Expenses: Sl.no Particulars Amount in Rs 01. Company formation and legal expenses 4,00,000/02. Project Report ,Technical assistance ,Civil 2,50,000/plan and Estimates 03. Travelling expenses 75,000/04. Miscellaneous expenses 20,000/Total: Rs. 7,45,000/-

Description of land and Building: Sl.no Particulars 01. Land @ Rs.4.5 lac/Acre + 10% registration expenses 02. Work shed @ Rs.325/- sq/ft Raw material processing area 7000sq.ft Processing Zone 1000sq.ft. Conveyor Area 2000 sq.ft Glazing Bay 7200 sq.ft. Kiln area 4000 sq.ft. Finished Goods area 4000sq.ft. 03. Boundary wall 04. Office @ Rs.350/sq.ft. 05. Security office and Gate 06. Staff room and Toilet @ Rs.250/ - sq.ft. 07. Laboratory Room @ Rs.350/- sq.ft. 08. Land development 09. Deep Tube Well 6 10. Cake dryer 11. Glazing Tanks 02 t cap 06 nos. 12. Generator Room

Specifications 02 Acre

Amount in Rs. 9,90,000/-

25200 sq.ft

81,90,000/-

1176 rft. 400 sq.ft. L.S. 600 sq.ft. 800 sq.ft. L.S. L.S. l.s. L.S.

2,35,200/1,40,000/20,000/1,50,000/2,80,000/50,000/80,000/3,00,000/2,30,000/50,000/107,15,200/-

Total Rs. List of Plant and Machinery: Sl.no. Particulars 01. Ball Mill 04 T Cap.02 nos Connected with 20 H.P.motor and accessories each. 02. Agitator 02 T one no. with 10H.P.motor and accessories 03. Hydraulic filter press 120 plates with 05 H.P.pump and
7

Specifications 5x3

Amount In Rs. 10,00,000/-

02 t MS.

6,00,000/7,30,000/-

04.

05. 06.

07.

08.

09.

10.

11.

12. 13.

filter clothes 01 set extra 02 nos Pan Mill 01 no Connected with 7.5 H.P. motor complete Bucket Elevators and Silos 80 T Hydraulic press connected with 15 H.P.motor and suitable dies Glazing line conveyor connected with 02 H.P.Motor two nos. and online blower 05 H.P.04 nos Ball Mill for glazing of 500 kg capacity connected with 05 H.P.motor Glaze vat with vertical Pump arrangement with agitators connected with 0.5 H.P.motor Pot Mill connected with 04 pot attachment and 01 H.P.motor Drier and Shuttle kiln with 18 cars attachment with transfer car arrangement Buller Ring Apparatus Laboratory Equipments

01 no

2,60,000/-

03 nos

6,00,000/14,00,000/-

4,00,000/-

06 nos

4,50,000/-

03 nos s.s.vat

1,50,000/-

01 no

50,000/-

20 H.P. 02 Nos

30,00,000/-

Total Rs. Add sales tax Cost of Plant & Machinery Rs.

20,000/5,50,000/92,10,000/7,37,000/99,47,000/-

Packing ,Forwarding ,Insurance, Frieght @15% Erection and Installation of Shuttle kiln

Rs.14,92,000/Rs.13,00,000/-

Electrification and Installation & Security deposits Rs. 17,00,000/Generator 125 KVA 02 nos Cost of Transformer Moulds and Assembly Pollution Control Equipments Rs.14,00,000/Rs.8,50,000/Rs.7,50,000/Rs.6,00,000/Total Rs.80,92,000/Other Fixed Assets: Sl.no. 01. 02. 03. 04. Particulars Furnitures Electrification Computer ,Printer ,UPS ,Fax, Miscellaneous Total Rs. Amount in Rs. 10,000/20,000/80,000/10,000/1,20,000/-

Total Fixed Capital ( Amount in lac): Preoperative expenses Land & Building Plant & Machinery Errection ,Installation ,Electrification ,Forwarding,Packaging,Transportation,Generator, Auxillary items and Pollution control equipment Other Fixed Assets Total 7,45,000/107,15,200/99,47,000/80,92,000/-

1,20,000/296,19,200/-

Salaries and Wages per month: Sl.no. 01. 02. 03. 04. 05. 06. 07. 08. Particulars Works Manager Supervisor Electrician Accountant Salesman Skilled workers Semi skilled workers Watchman Fringe benefits @ 15% Total Rs. Raw Materials per month ( in Rs.) Sl.no. 01. 02. 03. 04. Particulars Local clay Wollastonite Talc Glaze Rate 500/M.T. 4000/M.T. 2000/M.T. 40,000/ M.T. Quantity 173.5 T 21 T 12.5 T 6.30T Total Rs. Utilities and Fuel Per Month: Sl.no. 01. 02. 03. Particulars Electric Power (32600 units) Furnace oil (27600 lts) Diesel 2400 lts Total Rs. Amount 1,48,000/414,000/41,000/6,03,000/Amount Rs. 87,000/84,000/25,000/2,52,000/4,48,000/In No. 01 01 01 01 02 04 08 02 Rate 15,000/6500/5000/3000/5000/3000/2000/1200/Total Rs. Amount In Rs. 15,000/6500/5,000/3,000/10,000/12,000/16,000/2400/69,900/10,485/80,385/-

10

Consumables per month: Sl.no. Particulars 01. Cardboard box 02. Tile cassettes Quantity 11250 noa 3500 nos Rate Rs.10/per box Rs.80/- per p Total Rs. Amount 1,12,500/2,80,000/3,92,500/Amount 1,000/5,000/15,000/30,000/5,000/25,000/10,000/91,000/Amount in Rs 36,400/11,20,000/4,52,168/9,04,336/32,29,770/Total : Total Capital Investment : Total Fixed Capital Rs.2,96,19,200/57,42,770/-

Other expenses per month Sl.no. Particulars 01. Postages 02. Tax & Insurance 03. Travelling and conveyance 04. Frieght& Carriage 05. Other consumables like oil & lubricants 06. Repairs and Maintenance 07. Miscellaneous Total : Working capital Assessment Sl.no. Particulars 01. Fuel stock (2 days) 02. Raw materials (10 weeks) 03. Work in progress (01 week) 04. Finished stock (14 days) 05. Sundry Debtors (8 weeks)

Working Capital Requirement Rs.57,42,500/Total : Rs. 3,53,61,700/11

Manufacturing cost Per Month : Raw materials Salary and wages Utilities and Fuels Consumables Other expenses Depreciation on Building @5% Depreciation on Plant and M@10% Depreciation on other Fixed Assets @20% Interest on Term Loan @16% Interest on Working Capital @ 16 Total : Manufacturing cost per annum Total production Per Month Sales Proceeds per month : @ Rs.19,000/-M.T. = Rs.36,00,000/4,48,000/80,000/6,03,000/3,93,000/91,000/41,000/1,50,000/2000/2,79,000/57,000/21,44,000/257,28,000/180 T

Gross Sales Proceeds per annum = Rs.432,00,000/Net sales per annum (less excise) = Rs.378,00,000/Profit per month Profit per annum Return on sales Return on Investment Break Even Analysis: Contribution = 199.36 lacs Variable cost :Sales contribution = 378-199.36 =178.64 lac = Rs.10,13,000/= Rs.121,60,000/= 28.15 % = 34.30%

12

Fixed cost per month : Salary and Wages (40%) Rs. 32,000/Utilities Other Expenses Depreciation Interest On Term loan Total (20%) Rs. 1,21,000/(25%) Rs. 23,000/Rs. 1,93,000/Rs. 2,79,000/Rs. 6,48,000/-

Fixed cost per annum Rs. 77.76 lacs Break Even Sales (BES) = F/(C/S) = 77.76/ (199.36/378) =77.76/0.527 = 147.55Lacs or 39% of net sales

Depreciation Analysis :( Amount in Lacs) Year Building P&M Oth.Asst 5% dep .on building 1.2 4.86 0.96 4.62 0.77 4.39 0.61 4.17 0.49 3.96 0.39 3.76 10% dep.on machine 18.04 16.24 14.61 13.15 11.84 10.65 20% dep.on other 0.24 0.19 0.15 0.12 0.10 0.08 Total Depr. 23.14 21.05 19.15 17.44 15.90 14.49

01 02 03 04 05 06

97.25 92.39 87.77 83.38 79.21 75.25

180.39 162.35 146.11 131.50 118.35 106.52

13

Sources of Finance (Rs.in lacs) Description Preoperative expenses Land Civil construction Plant & Machinery Other fixed assets Working Capital Total Term Loan Working capital Loan Own Margin TOTAL Term Loan Repayment Schedule : (Interest Rate 16% per annum) Year 1 2 3 4 5 Opening balance 209.13 167.30 125.47 83.64 41.81 Interest, Rate Repayment 16% 33.46 41.83 26.77 41.83 20.08 41.83 13.38 41.83 6.69 41.81 Closing Balance 167.30 125.47 83.64 41.81 Total 7.45 9.90 97.25 180.39 1.20 57.43 353.62 Own Margin 100% 100% 25% 25% 25% 25% Margin Amount 7.45 9.90 24.31 45.10 0.30 14.36 101.42 Rs. 209.13 lacs Rs. 43.07 lacs Rs.101.42 lacs Rs.353.62 lacs Financial Margin 75% 75% 75% 75% Institute Amount 72.94 135.29 0.90 43.07 252.22

14

PROJECTED PROFITABILITY AND PERFORMANCE ANALYSIS: Sl.no. B C Capacity Utilization Production/annum Gross Sales Less Excise Net Sales Cost of Production Raw material consumed Power and Fuel Direct Labor and Wages Consumable store Repairs and Mint Other manufacturing exp. Depreciation Total cost of production Add .opening balance of SIP&FPS Ded.closing balance of SIP &FPS Cost of Sales Gross Profit(c-E) Interest on Term Loan W.C.Loan Selling, General, Adman.expenses Profit Before Tax Provision for Tax @33% Net profit Depreciation Net cash Accrual Repayment 60% 2160T 432 53.12 378.88 70% 2520t 504 64.64 439.36 80% 2880t 576 76.16 499.84 85% 3060t 612 81.92 530.08 90% 3240t 648 87.68 560.32

D 1 2 3 4 5 6 7

53.76 72.36 9.65 47.1 3.0 7.92 23.14 216.93 25.12 191.81 187.07 33.46 6.89 20 126.72 41.82 84.90 23.14 108.04

62.72 84.42 9.65 54.95 3.0 7.92 21.04 243.70 25.12 29.31 239.51 199.85 26.77 6.89 25 141.19 46.59 94.6 21.04 115.64

71.68 96.48 10.62 62.8 3.5 8.71 19.15 272.94 29.31 33.50 268.75 231.09 20.08 6.89 35 169.12 55.81 113.31 19.15 132.46

76.16 102.51 10.62 66.73 3.5 8.71 17.44 285.67 33.50 35.59 283.58 246.50 13.38 6.89 50 176.23 58.16 118.07 17.44 135.51

80.64 108.54 11.68 70.65 4.0 9.58 15.90 300.99 35.39 37.68 298.90 261.42 6.69 6.89 65 182.83 60.34 122.50 15.90 138.40

8 9 E F G

H I J K L M N

15

Obligation 1)Towards Term loan 41.83 2)Interest on Term Loan 33.46 O DSCR 2.58

41.83 26.77 2.76

41.83 20.08 3.17

41.83 13.38 3.23

41.83 6.69 3.31

Projected Balance sheet: Liabilities: Year Equity Share capital Reserve and surplus Term Loan W.C.Loan Other liabilities Sundry Creditors Total 1st 101.42 2nd 110.99 3rd 120.57 4th 125.35 5th 130.13

84.90 167.30 43.07 41.82 438.51

94.6 125.47 43.07 46.59 11.00 431.72

113.31 83.64 43.07 55.81 11.00 427.40

118.07 41.81 43.07 58.16 32.00 418.46

122.50 43.07 60.34 59.00 415.04

Assets: Net Block Investment Investments Dividend Current Assets Cash & Bank Balances Total 255.70 40.00 30.00 57.42 55.39 438.15 234.65 42.00 30.00 66.99 58.08 431.72
16

215.50 45.00 30.00 76.56 60.34 427.40

198.06 44.00 30.00 81.35 65.05 418.46

182.16 48.00 30.00 86.13 68.75 415.04

Internal Rate of Return (IRR): Initial Investment : Rs.353.62 lacs Year end 1st 2nd 3rd 4th 5th Cash inflow Discounting Present Rate @31% Value Rs.lac 126.72 0.763 96.69 141.19 0.583 82.31 169.12 0.446 75.43 176.23 0.340 59.92 182.84 0.260 47.54 361.89 Discounting Present Rate @32% Value Rs.lac 0.758 96.05 0.574 81.01 0.435 73.57 0.329 57.98 0.250 45.71 354.32

+ve fig at 31% IRR = 31% + --------------------------------------------x (32-31) + ve fig at 31% + -ve fig at 32% = 31% + 0.92% = 31.92%

17

List of Suppliers addresses for: Plant and Machinery : 1) M/s.Galaxy Conveyors Pvt.Ltd., 30 AhiyaComm .Centre,Gondal Road, Rajkot , Pin :360002 2) M/s.Neptune Engineering Co., 252, GIDC ,IndustrialEstate,Phase:II, ModheraRoad,Dediasan (Mehsana),India 384002 3) M/s.Ghosh Engineering Works, Gohramora,Sreerampore,Hooghly,W.B

Raw materials: 1). J.K.Minerals, Station Road,Janshi 2). Golab Chand Kotcher,AjmerRoad,Bikaneer 3). Plastic Clay and China Clay; Md.Bazar,Birbhum,W.B.

Resource Centre of Technology: 1. Br.MSME-DI,Govt.of India,J.P.Avenue,Durgapur 12, W.B 2. Central Glass and Ceramic Research Institute,Jadavpur,Kolkata, 3. Govt. College of Engg. & Ceramic Technology, A.C.BanerjeeLane, Kol 10

List of the units set up by using this project Report: It is completely a new detailed project Report prepared for the eastern Zone of India keeping technology at per with the technology being used in western zone of India. At present the tiles are coming from Western Zone,Southern Zone of India due to availability of better quality of fuel e.g.Natural Gas Or. CNG. In the eastern Zone now a days CNG is approachableand with this any new entrepreneur may find enough potential for this product in the eastern Zone of India.
18