Rate Contract

Government of India Directorate General of Supplies & Disposals Jeevan Tara Building, 5 Sansad Marg New Delhi-110001 Tel Number 23360610/23360537 Rate Contract no. I.B.Panels/IT-3/RC-D10L0000/0109/83/F0293/1400 Dated 28-MAR-08

To, AV SCIENCE & TECHNOLOGIES PVT LTD Y-49,HAUZ KHAS, New Delhi- 16 Mr. G.R.Malik - 9811115596, Mr. Nirmesh Jain- 9810701047 Sub: Rate Contract for supply of Interactive Boards and Panels Validity: From 28-MAR-08 To 30-SEP-08 . Ref:(1) This Office Tender Enquiry No. I.B.Panels/IT-3/RC-D10L0000/0109/83 Opened on 05-FEB-08. (2) Your Quotation No. AVST/DGSND/IBPANEL And Dated 05-FEB-08. Dear Sir, You are hereby informed that your above refered tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This rate contract will be governed by the terms and conditions brought in the Form no. DGS&D 1001 available from dgs&d sales counter on payment of Rs. 50/- .The Rate Contract and the schedules annexed here to shall be the sole repository of this Rate Contract/Transaction. SCHEDULES ANNEXED 1.Schedule "A" Description of stores,prices,duties/taxes. 2.Schedule "B" special conditions of contract / Other information. 3.Schedule "C" Information to DDOs about parallel rate contracts. 4.Annexure - Technical Specification

Yours Faithfully, ( ) Assistant Director(S)/Section Officer/Dy.Director/Director/DDG(S) For and on behalf of the purchaser named in the Form DGS&D 1001.

Page 1 of 13

Download Date: 26-NOV-12

COPY TO: 1.The Chief Controller of Accounts,Department of commerce,New Delhi/ COA Mumbai/COA Kolkata,COA Chennai. (Through authentication cell) This issues with the approval of competent authority. 2.Deputy Director General of Supplies & Disposals,Chennai -10 copies each 3.Deputy Director General of Supplies & Disposals,Kolkata -10 copies each 4.Deputy Director General of Supplies & Disposals,Mumbai -10 copies each 5.Deputy Director General (QA),Kolkata -10 copies each 6.Deputy Director General (QA),Chennai -10 copies each 7.Deputy Director General (QA),Mumbai -10 copies each 8.Deputy Director General (QA),DGS&D -10 copies each 9.Inspection Authority ADG(QA) DGS&D New Delhi - 110001. 10.Quality assurance Officer Director (QA) Delhi Directorate/ Mumbai,Chennai/Kolkata. 11.Concurrent Audit 12.MIS Cell 13.Ledger clerk 14.O.L.Section 15.All Direct Demanding Officers as per mailing list maintained by DGS&D. 16.Concerned CQA(for defence item only)-As per Clause 19 of RC 17.Concerned SQAO(for defence item only)-As per Clause 20 of RC

( ) Assistant Director (S) / Section Officer / Deputy Director/Director/DDG(S) FOR DIRECTOR GENERAL OF SUPPLIES & DISPOSALS

Page 2 of 13

Download Date: 26-NOV-12

SCHEDULE - A 1.Rate Contract No.:-I.B.Panels/IT-3/RC-D10L0000/0109/83/F0293/1400 Dated 28-MAR-08 For the Supply of Interactive Boards and Panels 2.Advance Rate Contract No.:- Nil Dated 3.(a) Name and Full Address of the Firm :AV SCIENCE & TECHNOLOGIES PVT LTD Y-49,HAUZ KHAS, New Delhi- 16 Mr. G.R.Malik - 9811115596, Mr. Nirmesh Jain9810701047 DELHI - 110016 Tel. No. - 91-11-26850245/46/50 Fax - 91-11-41656053/26968698 Email - [email protected] (b) Name and Full Address of Manufacturer :As per Schedule-B

(c) Brand: As per Schedl. B 4.Validity of Rate Contract: 28-MAR-08 To 30-SEP-08 5.Description of Item, Specification,Unit, Rate --------------------------------------------------------------------------------------------------------------------------------------------Item Model Store Description Unit Rate No. No. (in Rs) ED ED% CST/VAT CST/VAT% Service Tax --------------------------------------------------------------------------------------------------------------------------------------------6 IQ Board ET Interactive Board 80 Diagonal Size (mm): 1700,Aspect Ratio: 4:3,Linux Compatibility: No NOS. 81843 Rs. EIGHTYONE THOUSAN D EIGHT HUNDRED FORTYTHREE ONLY 102600 Rs. ONE LAKHS TWO THOUSAN D SIX HUNDRED ONLY

N.A 14 IQ Board ET Interactive Board 100

Incl.

12.5 NOS.

Diagonal Size (mm): 2400,Aspect Ratio: 16:9,Linux Compatibility: No

Page 3 of 13

Download Date: 26-NOV-12

N.A 20 Optional Items for Interactive Boards and Panels

Incl.

12.5 NOS. 3273 Rs. THREE THOUSAN D TWO HUNDRED SEVENTYTHREE ONLY 7638 Rs. SEVEN THOUSAN D SIX HUNDRED THIRTYEIGHT ONLY 7638 Rs. SEVEN THOUSAN D SIX HUNDRED THIRTYEIGHT ONLY 7638 Rs. SEVEN THOUSAN D SIX HUNDRED THIRTYEIGHT ONLY

Item: Electronic Pen for use in projection mode for Interactive Board

N.A 21 Optional Items for Interactive Boards and Panels

Incl.

12.5

Item: Blue tooth adaptor 10 m range or better NOS.

N.A 24 Optional Items for Interactive Boards and Panels

Incl.

12.5 NOS.

Item: Floor-stand for 1700 mm interactive Board

N.A 26 Optional Items for Interactive Boards and Panels

Incl.

12.5 NOS.

Item: Floor-stand for 2400 mm interactive Board

N.A 6-Terms of Delivery: 7-Excise Duty: 8-Sales Tax: 9-Delivery Period: 10(a)-Annual Turnover:

Incl.

12.5

Free delivery at consignee's premises including installation & commissioning. Not Applicabale Inclusive CST / VAT Within 8-12 weeks of from the date of technically & commercially cleared order. Without . Limit

(b)-Monetary Limit(In Rs.): 11-Payment Terms: 12-Slab Discount Clause: 13-Prices: 14-Quantity Offered:
Page 4 of 13

As per Schedule-B Nil FIXED Monetary Limit : Without Limit

15-Minimum Quantity in Single Supply Order: 16-Minimum order Value in Single Supply Order: 17-Status of the RC Holding Firm: 18-Paying Authority:

Without Limit LSI The Chief Controller of Accounts, Deptt. of Supply 16, AKBAR ROAD New Delhi -110011 For Civil ADG(Q.A), Jeevan Tara Building, 5 Sansad Marg New Delhi Director(QA), Delhi Directorate, Jeevan Tara Building, 4th Floor, Sansad Marg New Delhi DELHI -110001

19-Inspection Authority:

20-Quality Assurance Officer:

21-Place where the Stores are to be Tendered for Inspection: 22-R/C is DDOs Operated: 23-Packing & Specification :

AV SCIENCE & TECHNOLOGIES PVT LTD Y-49,HAUZ KHAS Yes see annexure

( ) Asstt. Director (S) / Section Officer / Dy. Director For and behalf of the purchaser named in the Form DGS&D 1001.

All the R/C particulars including prices in respect of individual R/Cs are available on DGS&D website which can be accessed by all.The DGS&D website is http://dgsnd.gov.in

Page 5 of 13

Download Date: 26-NOV-12

SCHEDULE - B RC Specification:i. Brand : RETURNSTAR ii. Country of Origin : CHINA iii.Name & Full Address of the Manufacturer: RETURNSTAR ELECTRONICS INFORMATION CO LTD C/19 INYTERNATIONAL BUILDING,NO 210 WUSI ROAD,FUZHOU, FUJINAN CHINA iv. SPECIAL CONDITIONS OF CONTRACT 1. Terms of delivery: The stores will be delivered by the firms on free delivery at consignee's end. Free delivery at site including freight & forwarding. Insurance as per DGS&D Standard Transit Insurance Clause. For Andaman & Nicobar & Lakshdweep, the firm will bear the delivery charges upto the main land port i.e. Kolkata / Chennai / Mumbai, whichever is nearest to the destination. After this, the delivery charges from main land port to the consignee destination in the above mentioned location, to be borne by the consignee. 2. PAYMENT TERMS: 95% payment will be made against proof of Inspection & provisional. receipt certificate issued by the consignee for the receipt of the material. The balance 5% of the contract price of the stores will be paid after demonstration and final acceptance of stores by the consignee and on submission of bank guarantee for the balance 5% of contract value valid for 2 months beyond the guarantee/warranty period. Indemnifying the purchaser against all losses incurred during the guarantee/warranty period stipulated in the contract. 3. Demonstration of the machines will be carried out free of cost at consignee's place.

4. Machines shall conform to Guarantee/Warranty clause for a period of 12 months from the date of Commissioning/demonstration, as per Clause18 of form No. DGS&D- 1001. 5. Other terms and conditions are as per Form DGS&D-1001. 6. No assistance for import of finished product or raw material will be provided.

7. Tenderers shall have all the testing facilities and instruments toi check and verify the functional parameters of the specifications. 8. For imported machines offered for inspection, the documentation requirements at the time of inspection of bulk supplies for each and every lot are as under:a) Bill of Lading; b) Packing list; c) Certificate of origin; d) Serial numbers along with model numbers pertaining / corresponding to imports covered by above documents; e) A certificate from the manufacturer that the machines with particular model Nos. and Serial Nos. were exported by them to Indian supplier and that the same were tested in their factory and found to be satisfactory as per the standard specification of the product. f) Guarantee/Warranty Certificate for the machine by R/C holding firms 9. Octroi Duty and Local Taxes: Normally materials to be supplied to Government Department against Govt. Contracts are exempted from levy of town duty, Octroi duty, terminal tax and other levies of local bodies. The local Town/Municipal Body regulations at times, however, provide for such exemption only on production of such exemption certificate from any authorized officer. Contractors should
Page 6 of 13 Download Date: 26-NOV-12

ensure that stores ordered against contracts placed by this office are exempted from levy of Town duty/ Octroi duty, Terminal tax or other local taxes and duties. Wherever, required, they should obtain the exemption certificate from the purchase officer or indentor concerned, to avoid payment of such local taxes or duties. Octroi, entry tax etc on the buyers account in the absence of relevant exemption certificate. 10. Road permit, Waybill to be provided by DDO along with the order. In all such cases where the requirement of Road Permit/Way Bills for entry of goods into a particular State is mandatory, the following provisions shall be strictly followed: -. (a) The supplier shall request the indentor/consignee for providing Road permit/ Waybill within 10 days of the receipt of the Supply order. The supplier shall furnish all the necessary information and documents in this regard to Indentor/consignee. (b) On receipt of the above request from the supplier, the indentor/consignee concerned shall arrange to provide the Road permit/Way Bill in the prescribed form to the supplier within a maximum period of two weeks so that the same reaches the supplier before the dispatch of the stores. However, in cases where the Road permit/Way Bill is issued on proof of actual invoice of the material, the consignee shall arrange to provide the Road permit/Way Bill from appropriate authorities within a maximum period of 5 days from the receipt of invoice. (c) The supplier shall not be held responsible for any delay in supply due to non- supply/delayed supply of Road permit/Way bill by the indentor/consignee. (d) All cases of abnormal delay in providing requisite details/ documents by the supplier or issue of Road permit/Way bill by indentor/consignee, the same shall be reported by them to DGS&D. The details of the Road permits presently applicable in different States are as under:Sr.No. States Road Permit 1 Andhra Pradesh: 2 Arunachal Pradesh: Form DG-01 3 Assam: Form 62 4 Bihar:Form 28 5 Chhattisgarh: Form 59A 6 Goa: 7 Gujarat: Form 403 8 Haryana:Form 38 if value is Rs. 25,000 or more. 9 Himachal Pradesh: 10 Jammu & Kashmir: 11 Jharkhand: Form 28B 12 Karnataka: 13 Kerala: 14 Madhya Pradesh: Form 88/89 15 Maharashtra: 16 Manipur: Form 27 17 Meghalaya: Form 14 18 Mizoram: Form 33 19 Nagaland : Form 16 20 Orissa: Form 28 21 Punjab: 22 Rajashthan: Form 18 23 Sikkam: Form 20 24 Tamil Nadu: 25 Tripura: Form 26 26 Uttar Pradesh: Form 32 27 Uttaranchal: Form 17 28 West Bengal: Form 50
Page 7 of 13 Download Date: 26-NOV-12

11. Signing of Inspection Notes issued by Quality Assurance Wing of DGS&D: ' Instructions to Indentors/Consignees': Advance Payment Copy of Inspection Note for claiming 95% payment: This is a provisional receipt. It only be tokens the receipt of stores by the consignee and is without prejudice to his rights of inspection and rejection under the general condition to contact. It is issued on said to contain basis the Contractor remaining responsible for proving the total quantities actually delivered. Consignee mentioned in the Inspection Notes should sign (in INK) & put his official rubber stamp on the Advance Payment Copy of Inspection Notes IMMEDIATELY on the receipt of the material and handover the same to the company's authorized representative. Where this is not possible or inconvenient, it should be signed (in INK) by an official authorized by the consignee in that behalf. In such cases, the official signing the receipt certificate should indicate his designation and the official on whose behalf he is signing; and put his official rubber stamp. Balance payment & Accounts Copy of Inspection Note for claiming 5% balance payment. (i) Within 90 days from the date of material received, Consignee mentioned in the Inspection Notes should sign (in INK) & put his official rubber stamp on the Balance & Accounts office copy of Inspection Notes and should fill up the columns of Receipt Voucher No. (ii) In cases where the supply is incomplete or defective or the supplier do not carry out commissioning/demonstration of the stores within the period as per (i) above, the consignee shall report such cases immediately to the supplier and DGS&D. (iii) In cases where the consignees do not release copy 2 and 5 of I/Notes within the period as (i) above for the reasons which are considered not valid by the supplier, they may approach DGS&D with complete details for authorization of balance payment without copy 2 and 5 of I/Notes and the same shall be considered by DGS&D on merits of each case. For supplies made from the pre-inspected stocks, Inspection Notes are to be obtained from the Quality Assurance Officer in each case. Despatches / Deliveries of pre-inspected stocks which are duly accepted need not, however, await release of Inspection Notes and may be effected before Inspection Notes are actually released. All other terms and conditions shall be as per standard conditions contained in Form DGS&D-1001. 12. Pre-Inspected Lot: In order to meet the urgent requirement of indentor you may maintain pre-inspected stock of I.B.Panel for ready dispatch against individual supply orders. In case, however, you fail to dispatch the stores within 60 days of inspection, the same shall have to be pre-inspected before dispatch. 13. Pre-Inspected Stocks of 500 Nos. I.B.Panel in assorted Models covered under rate contract listed in imported stores and indigenous stores would be maintained by firm for urgent requirements of various Govt. Departments. For supplies made from the pre-inspected stocks inspection Note are to be obtained from the Inspecting Officer in each case. Dispatches/deliveries of pre-inspected stocks which are duly accepted need not however, await release of I/Notes are actually released. SCHEDULE-D SPECIAL INSTRUCTIONS TOR TO R/C HOLDERS 1. Rate Contract holders are advised that before entertaining the supply order(s), they should ensure the availability of following certificates from DDOs. a) They are Central Government Department drawing funds from Consolidated Fund of India. b) The expenditure involved for the purchase has received the sanction of the competent financial authority. c) The funds are available under the proper head in the sanctioned budget allotment for the year. d) They have been fully authorized by the Department to sign the supply order and incur the liability in respect of the stores
Page 8 of 13 Download Date: 26-NOV-12

being ordered. 2. The rate contract holders should assist the consignee(s) in the installation and operation of the machine, including recommendations for accessories and voltage stabilizer. (SURENDRA SINGH ) ASSISTANT DIRECTOR (S) For and on behalf of the purchaser named in the form DGS&D-1001

Page 9 of 13

Download Date: 26-NOV-12

SCHEDULE - C List of Parallel Rate Contract For Interactive Boards and Panels Sr.No. NOTE: (1) Before placing supply order, DDOs are advised to check with DGS&D or on the website whether any further RCs have been awarded or amendments to Rate Contract have been issued. (2) All the R/C particulars including prices in respect of individual R/C's are available on DGS&D website,which can be accessed by all. The access code of DGS&D website is http://dgsnd.gov.in. NAME & FULL ADDRESS OF FIRM R/C NO & DATE

Page 10 of 13

Download Date: 26-NOV-12

ANNEXURE

A.

Interactive Boards The interactive Boards shall be suitable for operation in projector mode and in white board mode. In projector mode it should be possible to annotate text and images, record the images and to exercise full control of PC through electronic pen or stylus which will also work as a mouse. In whiteboard mode,

the Interactive Board is used as a whiteboard when no image is being projected on to the screen thorough projector. In this mode the system should have facility to record images of annotations and writings on the board using electronic pen (of dry-erase type) on PC hard disc. The board shall be suitable for wall mounting and shall include wall mounting kit as a standard accessory. If the requirement is for floor mounting type the floor stands shall be ordered extra. The standard parameters of the Interactive Boards shall be as under. 1. Screen : The Screen shall comprise of a scratch resistant surface with a sandwiched electronic grid/circuit in a frame duly sealed to make it dust and vermin proof. The screen shall have a minimum active diagonal length of 1300 mm, 1700 mm, 2000 mm or 2400 mm as specified. Aspect ratio : 4:3 or 16:9 as specified. Resolution : 400 Lines per cm (1000 Lines per inch) or better Positional Accuracy : 2 mm or better Computer interface : Standard one USB or serial port suitable for wireless connectivity (Wi-Fi adapter/Blue Tooth adapter to be ordered extra when required) Electronic Pen/Stylus: One set of four pens (black, blue, green and red) of dry-erase type and one electronic pen or stylus of OEM projector mode shall form part of standard supply. The electronic pen or stylus shall be suitable for use as a mouse in projector mode. Compatible with Windows XP or higher and where specified additional compatibility with Linux Operating System. 230 V +/-10%, 50 Hz AC 5 to 40 degree C, 95% RH at 40 degree C. Annotation software shall include features like draw, choose, pens, annotate, erase, color, shapes, sizes, text, edit, fonts, stamp, move, capture picture, video, save, rotate, undo, image gallery, print, floating key-board and background etc.

2. 3. 4. 5. 6. for

7.

Operating system

8. Power : 9. Operating conditions: 10. Annotation software :

B.

Interactive Panels The interactive panel is a display device suitable for annotation of text and images with electronic pen which will provide full control of PC functions in the same way as a mouse. The panel shall be supplied with a table top stand with facility for adjusting the viewing angle by tilting and for height. The standard parameters of the Interactive Panels shall be as under.

1. 2.

Screen Aspect ratio

: The Screen shall be a scratch resistance LCD display with minimum active diagonal length of 380 mm or 430 mm as specified. : 4: 3 or 380 mm and 5:4 for 430 mm size
Download Date: 26-NOV-12

Page 11 of 13

3. 4. 5. 6. 7. 8. 9.

Resolution

: XGA (1024 x 768 pixels) for 380 mm or SXGA (1280 x 1024 pixels) for 430 mm size. Computer interface : One USB and VGA Port. Electronic Pen : One electronic pen two button type shall form part of standard supply. Additional quantity when required shall be ordered extra. Operating system : Compatible with Windows XP or higher and where Specified additional compatibility with Linux Operating System. Power : 230 V +/-10%, 50 Hz AC Operating conditions: 5 to 40 degree C, 95% RH at 40 degree C. Annotation software : Annotation software shall include features like draw, choose, pens, annotate, erase, color, shapes, sizes, text, edit, fonts, stamp, move, capture picture, video, save, rotate, undo, image gallery, print, floating key-board and background etc. Environmental Tests Type testing shall consists of verification of all the features & functional requirements including environmental tests and shall be from any govt. laboratory. The environmental tests sequence will be as under : 1. Dry Heat : For 16 hrs. at a temp. of 45 degree C in accordance with IS:9000/part-3/section-5/1977 (reaffirmed in 2004). 2. Cold Test : For 4 hrs. at a temp. of 0 degree C in accordance with IS:9000/part-2/section-4/1977 (reaffirmed in 2004). 3. Damp Heat Test : For 2 Cycles of 24 h each at a temp. of 40 degree C & 95% RH in accordance with IS:9000/part-5/section-1/1981 (reaffirmed in 2004). After each environmental test and a recovery period of two hours, the product shall be checked for complete functional and feature verification, which should not show any deterioration in the performance before the environmental tests sequence.

C.

Optional Items for Interactive Boards and Panels Specification : As per General Technical Requirement. Interactive Board Specification : As per General Technical Requirement.

Page 12 of 13

Download Date: 26-NOV-12

LIST OF ALL AMENDMENTS For RC No. I.B.Panels/IT-3/RC-D10L0000/0109/83/F0293/1400

Sr No. Amendment No. 1 I.B.Panels/IT-3/RC-D10L0000/0109/83/F0293/1400/16452

Amendment Effective Date From 15-OCT-08 28-MAR-08

Amendment In Amendment in Annexure & Clauses

Page 13 of 13

Download Date: 26-NOV-12