Grease Nipples From UMETA Catalogue GK84-E 04-2012-2

GREASE NIPPLES
Maintaining permanent motion! They are small and inconspicuous, but responsible for keeping machines and all kinds of equipment in motion - whether in a harvester in Russia, a pipeline in Alaska, or a brewery in Australia. There is a UMETA Grease Nipple for every application purpose in most sizes, types and composition. With a range of more than 1,500 different types of nipples with about 70 different thread forms, we offer the largest product line worldwide. Depending on the application and the installation sites, we can manufacture grease nipple according to international standards. Other than a standard version made of steel, zinc-plated and passivated, we offer many other types, made of brass or stainless steel. You will always find a solution in our range of products - even for the most challenging application. Rely on us since we are manufacturer and not a dealer - for about 80 years! UMETA GREASE NIPPLES - ADVANTAGES AT A GLANCE 1,500 available types hydraulic-type-, ball-type-, flush-type-, bayonet-, and button-head nipples standard versions made of zinc-plated steel, stainless steel, or brass case-hardened according to DIN international product standards (e. g. DIN, ISO, SAE, BS, JIS) individual, custom-designed solutions individual packaging according to customers requirements FUNCTION OF A GREASE NIPPLE
TASKS OF A GREASE NIPPLE protection of the lubrication point against dirt and humidity no sealing against internal pressure standardized connection to the grease gun essential for maintenance and repairs RANGE OF APPLICATIONS bearings hinges for machines, vehicles, industry cardan shafts drive shafts linear guides hydraulic cylinders drives chains axels GREASE NIPPLES ARE MANUFACTURED OF steel: 1.0718 (11SMnPb30+C) SAE 12L13 stainless steel: 1.4305 ~ ASTM303 (SST303); 1.4401, 1.4404 ~ ASTM316, 316L (SST316L) brass: CuZn39 Pb3 (CW614N)
36
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: [email protected] ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm
G r e a s e N i p p e l s a c c o r d i N G to d i N
UMETA HYDR AULIC-T YPE GRE ASE NIPPLES ACCOR DING TO DIN 71412
APPLICATION AREA UMETA hydraulic-type nipples are suitable for all standard lubrication points, which have to be frequently lubricated in a reliably way. Due to their multi-purpose field of application, they are the most commonly used types of grease nipples. VERSIONS In general, our hydraulic-type grease nipples according to DIN are made of steel, case-hardened, zinc-plated and passivated, and they are featured with a tapered thread. The head diameter is 6.5 (-0.2) mm / 0.256" (- 0.008"). For safety reasons and in order to avoid abrasion wear, the standard demands 550 HV as a minimum for a surface hardness. Therefore, we operate this decisive process in our own curing oven. We offer various standard types also in brass or stainless steel 1.4305 ~ ASTM 303 and 1.4404 ~ ASTM 316L (V2A/V4A). Of course, our hydraulictype nipples are also available in different angle versions, with a self-forming thread, or as drive-in type.
MOUNTING INSTRUCTIONS In order to allow for a proper lubrication with all common grease guns, the head space, which is necessary for installation, should be considered (please see table with dimensions). OPERATING INSTRUCTIONS As suitable lubricating nozzle, we recommend our hydraulic couplers.
A
B
D E
SPECIAL VERSIONS Upon request, UMETA manufactures hydraulic-type nipples in other versions, with respect to the following: dimension material Head space thread size A = 50 mm (1.97") D = 25 mm (0.98" - 63/64") thread form (e. g. with cylindrical thread) B = 16.5 mm (0.65") E = 75 mm (3") opening pressure C = 19 mm (0,75" - ") F = 55 mm (2.16" - 2 1/8") surface colour (e. g. yellow passivated) further surface treatment unhardened etc.
37
Type H1
Hydraulic-Type Grease Nipples according to DIN 71412 straight version A/180 standard versions according to DIN are made of steel, case-hardened, zinc-plated and passivated made of steel, zinc-plated and passivated for other types and materials, please see table, or upon request
GW = thread L1 = overall length L2 = thread length L3 = shank length SW = HEX size (all measures in mm, thread metric or in inches)
GW
L1 15
L2 5.5
M 5 x 0.8
L3
SW 7mmHEX
Ref.- No.: Steel Brass SST303 SST316L 1100701 1110701 1120701 Ref.- No.: Steel Brass SST303 SST316L 1100703 1110703 1120703 5241056 5241059 Ref.- No.: Steel Brass 5241007 5241101 1100704 1110704 5241038 5241057 *5241060 5313742 1101104 Ref.- No.: Steel Brass 1100905 Ref.- No.: Steel Brass 1100906
GW
M 10 x 1.0
L3 SW 11mm HEX 11mm HEX
L1 L2 15 5.5 17.5 7.5
Ref.- No.: Steel Brass SST303 SST316L 1101109 1111109 1121109 1141109 5241074 Ref.- No.: Steel Brass 1101110
GW
L1 15 24 29
M 6 x 0.75
L2 5.5 6 8.3 L3 14 19 SW 7mmHEX 7mm HEX 7mm HEX
GW
L1 15
L2 5.5
M 10 x 1.25
L3
SW 11mm HEX
SST303
SST316L
GW
L1 13.5 15 17.3 24 29 41 15
M 6 x 1.0
L2 4 5.5 5.6 6 8.3 6 5.5 L3 SW 7mmHEX 7mm HEX 7mm HEX 7mm HEX 7mm HEX 7mm HEX 11mm HEX
GW
SST303 SST316L 5241102 1120704 1140704 L1 15
L2 5.5
M 10 x 1.5
L3
SW 11mm HEX
Ref.- No.: Steel Brass SST303 SST316L 1101111 1111111 1121111 1141111 Ref.- No.: Steel Brass 1101412 Ref.- No.: Steel Brass 1101413
8.5 14 19 31
GW
M 12 x 1.0
L3 SW 14mm HEX
L1 L2 17.5 6.5 1121104
SST303
SST316L
GW
SST316L
M 12 x 1.25
L3 SW 14mm HEX
GW M 7 x 1.0 SW L2 L3 SW L1 9
15 5.5 9mm HEX
SST303
L1 L2 17.5 6.5
SST303
SST316L
GW
SST303 SST316L
M 12 x 1.5
L3 SW 14mm HEX
GW
L1 15
M 8 x 0.75
L2 5.5 L3 SW 9mm HEX
L1 L2 17.5 6.5
Ref.- No.: Steel Brass SST303 SST316L 1101414 1111414 1121414 Ref.- No.: Steel Brass 1101415 Ref.- No.: Steel Brass 1101417 Ref.- No.: Steel Brass 1101418 Ref.- No.: Steel Brass 1101719
GW
M 12 x 1.75
L3 SW 14mm HEX
GW
L1 L2 15 5.5 18.5 8.5
M 8 x 1.0
L3
SW 9mm HEX 9mm HEX
Ref.- No.: Steel Brass SST303 SST316L 1100907 1110907 1120907 1140907 5241009 Ref.- No.: Steel Brass SST303 SST316L 1100908 1110908 1120908 1140908
L1 L2 17.5 6.5
SST303 SST316L 1121415
GW
M 14 x 1.5
L3 SW 14mm HEX
GW
L1 15
L2 5.5
M 8 x 1.25
L3 SW 9mm HEX
L1 L2 17.5 6.5
SST303
SST316L
GW
M 14 x 2.0
L3 SW 14mm HEX
L1 L2 17.5 6.5
SST303
SST316L
GW
L1 18
M 16 x 1.5
L2 7 L3 SW 17mm HEX
SST303
SST316L
*unhardened
38
GW
L1 43 15
L2 6 5.5
R 1/8, 1/8 - 28 BSP

L3 SW 33** 9mmHE X 11mmHE X
Ref.- No.: Steel Brass SST303 SST316L 5241070 1101156 1111156 1121156 1141156 Ref.- No.: Steel Brass SST303 SST316L 1101457 1111457 1121457 1141457 5241071 Ref.- No.: Steel Brass 1101758
GW
L1 15
L2 5.5
1/4" BSW
L3
SW 7mm HEX
Ref.- No.: Steel Brass 1100750
SST303
SST316L
GW
R 1/4, 1/4 - 19 BSP

L3 SW 14mmHE X 14mmHE X
GW
L1 14 15
5/16" - 24 NF/UNF/SAE Ref.- No.:

L2 4 5.5 L3 SW 9mm HEX 9mm HEX Steel Brass SST303 SST316L 5241068 1100938 1110938 1120938 Ref.- No.: Steel Brass 1100945 Ref.- No.: Steel Brass 1100951 Ref.- No.: Steel Brass 1101769 Ref.- No.: Steel Brass 1101146
L1 L2 17.5 6.5 19 8
GW
L1 18
L2 7
R 3/8, 3/8 - 19 BSP

L3 SW 17mmHE X
GW
SST303 SST316L 1121758 L1 15
5/16" - 22 BSF
SST303
SST316L
GW
L1 45 65 15 17 17.5 31
1/8" - 27 NPT/PTF
L2 6.5 8 5.5 6.5 6.5 6 L3 SW 35** 9mmHE X 55** 9mm HEX 11mm HEX 11mm HEX 7.5 11mm HEX 21 11mm HEX
GW
Ref.- No.: Steel Brass SST303 5241076 5241077 1101167 1111167 5241024 5241105 5241106 5241075 SST316L L1 15
5/16" BSW
SST303
SST316L
GW
1141167 L1 18
3/8" - 18 NPT/PTF
L2 7 L3 SW 17mm HEX
SST303
SST316L
GW GW
L1 17.5 19 21
3/8" - 20 BSF
1/4" - 18 NPT/PTF
L2 6.5 8 9 L3 SW 14mmHE X 14mm HEX 14mm HEX
Ref.- No.: Steel Brass 1101468 5241072
SST303
SST316L
L1 15
SST303
SST316L
1141468
GW
L1 15

L2 5.5 L3 SW 11mm HEX Steel Brass SST303 SST316L 1101139 1111139 1121139 Ref.- No.: Steel Brass 1101152
GW
L1 13.5 15 17.3 24 29 41

L2 4 5.5 5.6 6 8.3 6 L3 SW 7mmHE X 7mm HEX 7mm HEX 7mm HEX 7mm HEX 7mm HEX Steel Brass SST303 SST316L 5241054 5241103 1100737 1110737 1120737 5241055 5241058 5241061 5241080
GW
L1 15
3/8" BSW
SST303
SST316L
8.5 14 19 31
GW
1/2" - 20 UNF/NF/SAE Ref.- No.:

L3 SW 14mm HEX Steel Brass 1101440 SST303 SST316L
L1 L2 17.5 6.5
GW
L1 15 29
L2 5.5 8.3
1/4" - 26 BSF
L3 SW 19 7mmHE X 7mm HEX
Ref.- No.: Steel Brass SST303 SST316L 1100744 1110744 1120744 5241062
** 2-parts
39
Type H2
Hydraulic-Type Grease Nipples according to DIN 71412 angled version B/45 /67 optionally available with square or hexagonal body standard versions according to DIN are made of steel, zinc-plated and passivated, head case-hardened with tapered thread for other types and materials, please see table, or upon request
W WL WL W
L1 SW L2 GW
L1 SW
L2
GW = thread L1 = overall length L2 = thread length WL = angle length W = angle SW = HEX size
(all measures in mm, thread metric or in inches)
GW
GW
M 5 x 0.8
WL W SW 10.5 45 9mm HEX
L1 L2 23.5 5.5
Ref.- No.: Steel Brass 1200901 Ref.- No.: Steel Brass 1204503 1200903
GW
SST303 SST316L L1 20.5 25 26 47 25
M 10 x 1.0
L2 5.5 5.5 7 7 5.5 WL 11 11.5 11.5 11 11.5 W SW 45 11mm SQ. 45 11mm HEX 45 11mm HEX 45 11mm SQ. 67 11mm HEX
GW
M 6 x 0.75
WL W SW 10.5 45 9mm SQ. 10.5 45 9mm HEX
L1 L2 20.5 5.5 23.5 5.5
SST303
SST316L
Ref.- No.: Steel Brass SST303 SST316L 1204709 1201109 1211109 1221109 1241109 5242085 5242088 1401109 Ref.- No.: Steel Brass 1201110 Ref.- No.: Steel Brass 1201111 Ref.- No.: Steel Brass 1201412 Ref.- No.: Steel Brass 1201414 Ref.- No.: Steel Brass 1201415 Ref.- No.: Steel Brass 1201417 Ref.- No.: Steel Brass 1201719
GW
L1 25
GW
L1 20.5 23.5 17.5 20.5
M 6 x 1.0
L2 5.5 5.5 5.5 5.5 WL 10.5 10.5 12.3 12.2 W SW 45 9mm SQ. 45 9mm HEX 67 9mm SQ. 67 9mm HEX
Ref.- No.: Steel Brass SST303 SST316L 1204504 1200904 1210904 1220904 1240904 1404504 1400904 Ref.- No.: Steel Brass 1200905 Ref.- No.: Steel Brass 1200906
L2 5.5
M 10 x 1.25
SST303
SST316L
GW
L1 25
M 10 x 1.5
L2 5.5 WL W SW 11.5 45 11mm HEX
SST303 SST316L 1221111
GW
M 7 x 1.0
GW
SST303 SST316L
L1 L2 23.5 5.5
L1 L2 22.5 6.5
M 12 x 1.0
WL 12
W SW 45 14mm HEX
SST303
SST316L
GW
L1 L2 23.5 5.5
M 8 x 0.75
GW
SST303 SST316L
L1 L2 22.5 6.5
M 12 x 1.5
WL 12
W SW 45 14mm HEX
SST303
SST316L
L1 20.5 23.5 17.5 20.5
GW
L2 5.5 5.5 5.5 5.5
M 8 x 1.0
WL 10.5 10.5 12.3 12.2
W SW 45 9mm SQ. 45 9mm HEX 67 9mm SQ. 67 9mm HEX
Ref.- No.: Steel Brass SST303 SST316L 1204507 1200907 1210907 1220907 1240907 1404507 1400907 Ref.- No.: Steel Brass SST303 SST316L 1204508 1200908 1210908 1220908 1400908
GW
M 12 x 1.75
WL 12 W SW 45 14mm HEX
L1 L2 22.5 6.5
SST303
SST316L
GW
M 14 x 1.5
L1 20.5 23.5 20.5
GW
L2 5.5 5.5 5.5
M 8 x 1.25
WL 10.5 10.5 12.2
L1 L2 22.5 6.5
SST303
SST316L
W SW 45 9mm SQ. 45 9mm HEX 67 9mm HEX
GW
L1 L2 25.5 7
M 16 x 1.5
SST303
SST316L
40
GW
L1 20.5 25 28.5 36 25
L2 5.5 5.5 9 5.5 5.5
R 1/8, 1/8 - 28 BSP

WL 11 11.5 11.5 11 11.5
W SW 45 11mm SQ. 45 11mm HEX 45 11mm HEX 45 11mm SQ. 67 11mm HEX
Ref.- No.: Steel Brass SST303 SST316L 1204756 1201156 1211156 1221156 1241156 5241236 5242087 1401156 Ref.- No.: Steel Brass SST303 SST316L 1201457 1211457 1221457 1241457 Ref.- No.: Steel Brass 1201758 Ref.- No.: Steel Brass 1204767 5242104 5242105 Ref.- No.: Steel Brass 1201468 Ref.- No.: Steel Brass 1200944 1400944
GW
L1 L2 23.5 5.5
5/16" - BSW
Ref.- No.: Steel Brass 1200951 Ref.- No.: Steel Brass 1201769 Ref.- No.: Steel Brass 1201146 1401140 Ref.- No.: Steel Brass 1201139 1401139 Ref.- No.: Steel Brass 1201152 Ref.- No.: Steel Brass 1201440
SST303
SST316L
L1 L2 25.5 7
GW
3/8" - NPT/PTF
SST303
SST316L
GW
R 1/4, 1/4 - 19 BSP

L1 L2 22.5 6.5
GW
L1 25 25
GW
R 3/8, 3/8 - 19 BSP

L2 5.5 5.5
3/8" - 20 BSF
WL W SW 11.5 45 11mm HEX 11.5 67 11mm HEX
SST303
SST316L
L1 L2 25.5 7
SST303
SST316L
GW
L1 25 25
GW
L1 20.5 27 24
1/8" - 27 NPT/PTF
L2 5.5 7 7 WL 11 11.5 14 W SW 45 11mm SQ. 45 11mm HEX 67 11mm HEX
SST303
SST316L
L2 5.5 5.5
3/8" - 24 NF/UNF/SAE
SST303
SST316L
GW
L1 L2 22.5 6.5
1/4" - 18 NPT/PTF
WL 12
L1 25 SST303 SST316L
GW
L2 5.5
3/8" BSW
SST303
SST316L
W SW 45 14mm HEX
GW
L1 L2 23.5 5.5 20.5 5.5
1/4" - 26 BSF
L1 L2 22.5 6.5 SST303 SST316L 1220944
GW
1/2" - 20 UNF/NF/SAE
SST303
SST316L
GW
L1 L2 23.5 5.5 20.5 5.5
Ref.- No.: Steel Brass SST303 SST316L 1200937 1210937 1220937 1400937 Ref.- No.: Steel Brass 1200950 Ref.- No.: Steel Brass 1200945 1400945
L1 L2 23.5 5.5
GW
1/4" - BSW
SST303
SST316L
L1 L2 23.5 5.5 20.5 5.5
GW
5/16" - 22 BSF
SST303
SST316L
L1 L2 23.5 5.5 20.5 5.5
GW
5/16" - 24 NF/UNF/SAE
41
Type H3
Hydraulic-Type Grease Nipples according to DIN 71412 angled version C/90 standard versions according to DIN are made of steel, zinc-plated and passivated, head case-hardened with tapered thread for other types and materials, please see table, or upon request
WL
WL
L1
L1
SW L2 GW
L2 GW SW
GW
L1 18
L2 5.5
M 5 x 0.8
WL 13
W SW 90 9mmHEX
GW
SST303 SST316L L1 18 20 42
M 10 x 1.0
L2 5.5 5.5 7 WL 15 14 15 W SW 90 11mm SQ. 90 11mm HEX 90 11mm SQ.
Ref.- No.: Steel Brass SST303 SST316L 1304709 1301109 1311109 1321109 1341109 5242092
GW
L1 18 18
L2 5.5 5.5
M 6 x 0.75
WL 14 13
W SW 90 9mmS Q. 90 9mm HEX
SST303
SST316L
GW
L1 20
M 10 x 1.25
L2 5.5 WL 14 W SW 90 11mm HEX
SST303
SST316L
GW
L1 18 18
M 6 x 1.0
L2 5.5 5.5 WL 14 13 W SW 90 9mmS Q. 90 9mm HEX
Ref.- No.: Steel Brass SST303 SST316L 1304504 1300904 1310904 1320904 1341630
GW
L1 20
M 10 x 1.5
L2 5.5 WL 14 W SW 90 11mm HEX
SST303 SST316L 1321111
GW
L1 18
M 7 x 1.0
L2 5.5 WL 13 W SW 90 9mmHEX
GW
SST303 SST316L L1 22
M 12 x 1.0
L2 6.5 WL 14 W SW 90 14mm HEX
SST303
SST316L
GW
L1 18
M 8 x 0.75
GW
M 12 x 1.5
L2 6.5 WL 14 W SW 90 14mm HEX
SST303
SST316L
GW
L1 18 18
L2 5.5 5.5
M 8 x 1.0
WL 13 14
W SW 90 9mmHEX 90 9mm SQ.
GW
L1 22
M 12 x 1.75
L2 6.5 WL 14 W SW 90 14mm HEX
SST303
SST316L 1341415
GW GW
L1 18 18
M 14 x 1.5
L2 6.5 WL 14 W SW 90 14mm HEX
M 8 x 1.25
L2 5.5 5.5 WL 14 13 W SW 90 9mmS Q. 90 9mm HEX
L1 22
SST303
SST316L
GW
L1 22
M 14 x 2.0
L2 6.5 WL 14 W SW 90 14mm HEX
SST303
SST316L
42
L1 18 20 42
GW
L2 5.5 5.5 7
R 1/8, 1/8 - 28 BSP

WL 15 14 15
W SW 90 11mmS Q. 90 11mm HEX 90 11mm SQ.
Ref.- No.: Steel Brass SST303 SST316L 1304756 1301156 1311156 1321156 1341156 5242093
GW
L1 18
L2 5.5
5/16" BSW
WL 13
W SW 90 9mm HEX
SST303
SST316L
GW GW
L1 22 L2 6.5
R 1/4, 1/4 - 19 BSP

WL 14
W SW 90 14mmHEX
L1 20
L2 7
3/8" - 18 NPT/PTF
WL 19
W SW 90 17mm HEX
SST303
SST316L
GW
L1 20
R 3/8, 3/8 - 19 BSP

L2 7 WL 19 W SW 90 17mmHEX
SST303
SST316L
L1 20
GW
L2 5.5
3/8" - 20 BSF
WL 14
W SW 90 11mm HEX
SST303
SST316L
GW
L1 18
L2 5.5 WL 14 W SW 90 11mm HEX
GW
L2 5.5
1/8" - 27 NPT/PTF
WL 15 W 90 SW 11mmS Q.
SST303
SST316L
L1 20
SST303
SST316L
GW GW
L1 22 L2 6.5
3/8" BSW
L2 5.5 WL 14 W SW 90 11mm HEX
1/4" - 18 NPT/PTF
WL 14 W 90
SW 14mmHEX
SST303
SST316L
L1 20
SST303
SST316L
GW GW
L1 18
L2 5.5
1/4" - 26 BSF
WL 13
W SW 90 9mmHEX
Ref.- No.: Steel Brass SST303 SST316L 1300944 1310944 1320944
L1 22
L2 6.5
1/2" - 20 UNF/NF/SAE
SST303
SST316L
GW
L1 18
GW
L1 18
L2 5.5
1/4" BSW
WL 13
W SW 90 9mmHEX
SST303 SST316L 1320945
GW
L1 18
L2 5.5
5/16" - 22 BSF
WL 13
W SW 90 9mmHEX
SST303
SST316L
GW
L1 18
L2 5.5
5/16" - 24 NF/UNF/SAE
WL 13 W SW 90 9mmHEX
SST303
SST316L
43
UMETA HYDR AULIC GRE ASE NIPPLES WITH SELF- FORMING THRE AD
APPLICATION AREA By using UMETA grease nipples with self-forming thread (SFT / SFG) you effectively save the thread-cutting process in the borehole. VERSIONS For safety reasons and in order to avoid abrasion wear, the DIN standard for grease nipple with self-forming thread demands a specific surface hardness of 650 HV minimum as well as a particularly wide flank angle of 105 at the thread. For a better visual distinction, UMETA self-forming grease nipples are yellow passivated. Upon request, they are also available in another surface colour, e.g. blue passivated = silver coloured. OPERATING INSTRUCTIONS As suitable lubricating nozzle, we recommend our hydraulic couplers.
7,5
MOUNTING INSTRUCTIONS The special thread angle and the specific hardness level allow these grease nipples to be driven and screwed into holes without prior thread cutting. Thus, the thread of the grease nipple forms its counter thread. Later, the grease nipple can easily be screwed out and be replaced by a standard grease nipple. The exact size of the core hole depends on the material and must be determined by mounting tests. The consistency of the receiving material is decisive. The standard gauge for the installation bore diameter of 0.4-0.5 mm (0.02") below nominal width have proved in daily use.
Type H1/S
Hydraulic-Type Grease Nipples with Self-Forming Thread according to DIN 71412 straight version A/180 with self-forming thread, tapered standard version made of steel, case-hardened according to DIN (650HV) and yellow passivated
SW L1
SFG = self-forming thread (SFT) L1 = overall length L2 = thread length SW = HEX size (all measures in mm)
L2
SFG
SFG
L1 13.5 15 17.5
L2 4 5.5 5.5
S6x1
SW 7mmHEX 7mmHEX 7mm HEX
Ref.- No.: Steel not available in other materials 5317443 1100774 5241135 Ref.- No.: Steel not available in other materials 1100975 5317541
SFG
L1 15 18
S 10 x 1
L2 5.5 8 SW 11mm HEX 11mm HEX
SFG
L1 15 17
S8x1
L2 5.5 7 SW 9mmHEX 9mmHEX
Ref.- No.: Steel not available in other materials 1101176 5241014
44
105
flank angle
Type H2/S
Hydraulic-Type Grease Nipples with Self-Forming Thread according to DIN 71412 angled version B/45 with self-forming thread, tapered standard version made of steel, case-hardened according to DIN (head 550 HV/body 650 HV) and yellow passivated
W WL
L1 SW
SFG = self-forming thread(SFT) L1 = overall length L2 = thread length WL = angle length W = angle SW = HEX size (all measures in mm)
L2
SFG
SFG
S6x1
WL W SW 10.5 45 9mm SQ.
L1 L2 20.5 5.5
Ref.- No.: Steel not available in other materials 1204574 Ref.- No.: Steel not available in other materials 1204575 Ref.- No.: Steel not available in other materials 1204776 Ref.- No.: Steel not available in other materials 1200977
L1 L2 20.5 5.5
SFG
S8x1
WL W SW 10.5 45 9mm SQ.
SFG
S 10 x 1
WL 11 W SW 45 11mm SQ.
L1 L2 20.5 5.5
SFG
S 1/4" - 28
L1 L2 20.5 5.5
Type H3/S
Hydraulic-Type Grease Nipples with Self-Forming Thread according to DIN 71412 angled version C/90 with self-forming thread, tapered standard version made of steel, case-hardened according to DIN (head 550 HV/body 650 HV) and yellow passivated
WL
L1 SW L2 SFG
SFG = self-forming thread (SFT) L1 = overall length L2 = thread length WL = angle length W = angle SW = HEX size (all measures in mm)
SFG
S6x1
WL 14 14 W SW 90 9mm SQ. 90 9mm SQ.
L1 L2 18 5.5 21.5 5.5
Ref.- No.: Steel not available in other materials 1304574 1304578 Ref.- No.: Steel not available in other materials 1304575
SFG
L1 18
S8x1
L2 5.5 WL 14 W SW 90 9mm SQ.
SFG
L1 18
S 10 x 1
L2 5.5 WL 15 W SW 90 11mm SQ.
Ref.- No.: Steel not available in other materials 1304776
45
UMETA HYDR AULIC-T YPE GRE ASE NIPPLES - DRIVE- IN VERSION

APPLICATION AREA By using UMETA grease nipples with drive-in shank, you effectively save the thread-cutting process in the borehole. MOUNTING INSTRUCTIONS For straight-type grease nipples, we recommend using the drive-in tool, with which the nipple can be driven-in effectively and with care. The exact size of the core hole depends on the material and must be determined by mounting tests. The standard gauge for the installation bore diameter corresponds to the nominal width of the shank . OPERATING INSTRUCTIONS Since this type of grease nipple is only driven in, it may get loose by strong vibrations high back-pressure when greasing with auto-matic guns pulling off the hydraulic coupler Drive-in type hydraulic grease nipples should only be lubricated by a hydraulic nozzle. RECOMMENDATION Drive-in type grease nipples are only suitable for low pressures. Please check whether they can be replaced by self-forming nipples for a better fit.
VERSIONS Drive-in nipples as standard version are with plain shank, made of steel, case-hardened, zinc-plated and passivated. Upon request, UMETA manufactures drive-in grease nipples in other versions, with respect to the following: dimension material shank length shank type (e.g. serrated ridge) shank diameter surface colour further surface treatment
Drive-in tool
Type H1a
Hydraulic-Type Grease Nipples - Drive-in Version according to DIN 71412 straight version A/180 drive-in-type with plain shank standard versions according to DIN are made of steel, case-hardened, zinc-plated and passivated for other types and materials, please see table, or upon request
L1 B
Z = shank L1 = overall length L2 = shank length B = collar (all measures in mm, shank metric or in inches)
L2
Z
L1 15
5mm
L2 5.5 B 8
Z
SST303 SST316L L1 15 30
8mm
L2 5.5 5.5 B 10 10
Ref.- No.: Steel Brass SST303 SST316L 1100288 1110288 1120288 1100289 Ref.- No.: Steel Brass 1100389 Ref.- No.: Steel Brass 1100290
Z
L1 14 15 21
6mm
L2 4 5.5 11 B 8 8 10
Ref.- No.: Steel Brass SST303 SST316L 5241040 5241097 1100186 1110186 1120186 1140186 5241029
Z
L1 15
10mm
L2 5.5 B 12
SST303
SST316L
Z
L1 15
6.35mm, 1/4" Ref.- No.:

L2 5.5 B 8 Steel Brass 1100187 SST303 SST316L
Z
L1 15
5/16"
L2 5.5 B 10
SST303
SST316L
46
Type H2a
Hydraulic-Type Grease Nipples - Drive-in Version according to DIN 71412 angled version B/45 drive-in-type with plain shank standard versions according to DIN are made of steel, zinc-plated and passivated, head case-hardened
W WL
L1 SW L2 Z
Z = shank L1 = overall length L2 = shank length WL = angle length W = angle SW = HEX size
(all measures in mm)
6mm
WL W SW 10.5 45 9mm SQ.
L1 L2 20.5 5.5
Ref.- No.: Steel Brass 1204586 Ref.- No.: Steel Brass 1204588
Z
SST303 SST316L
L1 L2 20.5 5.5
10mm
WL W SW 10.7 45 11mm SQ.
SST303
SST316L
L1 L2 20.5 5.5
8mm
WL W SW 10.5 45 9mm SQ.
SST303
SST316L
Type H3a
Hydraulic-Type Grease Nipples - Drive-in Version according to DIN 71412 angled version C/90 drive-in-type with plain shank standard versions according to DIN are made of steel, zinc-plated and passivated, head case-hardened
WL
L1 SW L2 Z
Z
L1 18
6mm
L2 5.5 WL 14 W SW 90 9mm SQ.
Z
L2 5.5
10mm
WL 15
W SW 90 11mm SQ.
SST303
SST316L
Z
L1 18
8mm
L2 5.5 WL 14 W SW 90 9mm SQ.
SST303
SST316L
47
UMETA HYDR AULIC-T YPE GRE ASE NIPPLES - SPECIAL DESIGNS

The following types are representing only the most commonly used special-type nipples. For individual applications, UMETA manufactures hydraulic-type grease nipples with special equipment in other versions, with respect to the following: dimension material thread size thread form (e. g. with tapered thread) length
High-pressure hydraulic-type nipple with pin valve

straight version A/180 made of steel, zinc-plated and passivated with special pin valve Due to the special pin valve, the lubrication point will be sealed hermetically after the greasing operation. As a result, internal impulse-like pressures up to 400 bar (5,800 PSI) can be attained, depending on the respective application. APPLICATION AREA Heavy Industry, Heavy Vehicle Industry. GW
L1 21 21 GW = thread L1 = overall length L2 = thread length SW = HEX size
((all measures in mm, thread metric or in inches)
GW
L1 SW
L2
OPERATING INSTRUCTIONS ATTENTION! During dismantling, utmost caution is required because of the possible pressure load. Dismantling should be done by experienced personnel only!
SST303 5800050 SST316L L1 21
M 10 x 1.0
Ref.- No.: Steel Brass 5800049 5800052 Ref.- No.: Steel Brass 5800054 5800053
GW
L2 7
G 1/8, 1/8 - 28 BSPP Ref.- No.:

SW 13mm HEX
Steel Brass 5800056
SST303
SST316L
GW GW
L1 21 21
R 1/8, 1/8 - 28 BSP

SST303 SST316L 5800051
L1 21
L2 7
G 1/4, 1/4 - 19 BSPP Ref.- No.:

SW 13mm HEX Steel
Brass
SST303 SST316L 5800057
GW
L1 21 21
1/8" - 27 NPT/PTF
SST303 5800040
SST316L
Hydraulic-type nipple with sealing element

angled version B/45 made of steel, zinc-plated and passivated head hardened according to DIN with cylindrical thread with sintered sealing element under the collar APPLICATION AREA Heavy Industry, Heavy Vehicle Industry.
GW
M 14 x 2.0
WL 14 W SW 45 19 mm HEX
L1 L2 26.6 7
SST303
SST316L
48
Hydraulic-type nipple, double headed

made of steel, zinc-plated and passivated heads hardened according to DIN optionally available as: H2-double head with 67 angle / hexagon body H3-double head with 90 angle / square body
GW = thread, L1 = overall length, L2 = thread length, WL = angle length, SW = HEX size
APPLICATION AREA Option of alternative greasing by means of two heads. GW

L1 18
M 6 x 1.0
L2 5.5 WL W SW 14.5 90 9mm SQ.
Ref.- No.: Steel Brass 5244179 Ref.- No.: Steel Brass 5244178 5244181 5244159 Ref.- No.: Steel Brass 5244096 5244160 5244033
GW
SST303 SST316L L1 18 20 22
M 10 x 1.0
L2 5.5 5.5 7 WL 15 13.5 13.5 W SW 90 11mm SQ. 67 11mm HEX 67 11mm HEX
L1 18 18 20
GW
L2 5.5 5.5 5.5
M 8 x 1.0
WL 14.5 14.5 13.5
Ref.- No.: Steel Brass 5244094 5244161 5244163
SST303 SST316L 5244134
W SW 90 9mm SQ. 90 11mm SQ. 67 11mm HEX
SST303
SST316L
GW
L1 18 20 SST303 SST316L
R 1/8, 1/8 - 28 BSP

L2 5.5 5.5 WL W SW 15 90 11mm SQ. 13.5 67 11mm HEX
SST303
SST316L
GW
L1 18 20 24
M 8 x 1.25
L2 5.5 5.5 5.5 WL 14.5 13.5 14.5 W SW 90 9mm SQ. 67 11mm HEX 90 9mm SQ.
Hydraulic-type nipple with extension

straight version A/180 made of steel, zinc-plated and passivated head hardened according to DIN with tapered thread with press-fitted extension for exact grease flow
GW = thread L1 = overall length L2 = installation depth SW = HEX size

APPLICATION AREA For deep seated lubrication points, which can be serviced sufficiently through the extension, e.g. for drive shafts.
L1 75 130
GW
L2 65 120
M 8 x 1.0
SW 9mm HEX 9mm HEX
SST303
SST316L
L1 59 75
GW
L2 49 65
M 10 x 1.0
SW 11mm HEX 11mm HEX
SST303
SST316L
L1 32
GW
L2 22
M 8 x 1.25
SW 9mm HEX
SST303
SST316L
L1 75
GW
L2 65

SW 9mm HEX
Steel Brass 5241131
SST303
SST316L
49
UMETA BALL-T YPE GRE ASE NIPPLES ACCOR DING TO FOR MER DIN 3402
APPLICATION AREA UMETA ball-type nipples are suitable for all standard lubrication points, which have to be frequently lubricated in a reliably way. They are more and more often replaced by hydraulic-type grease nipples according to DIN 71412 due to their manifold application purposes. On request, UMETA manufactures ball-type nipples in other versions, with respect to the following: dimension material thread size thread form (e. g. with cylindrical thread) opening pressure surface colour (e. g. yellow passivated) further surface treatment etc. OPERATING INSTRUCTIONS As suitable lubricating nozzle, we recommend our hollow-type nozzles or hydraulic nozzles by using our push-type grease guns type A+B.
VERSIONS In general, our ball-type grease nipples according to DIN are made of steel, zinc-plated and passivated, and they are featured with a tapered thread. The head diameter is 6.5 (-0.2) mm / 0.256" (0.008"). We offer various standard types also in brass or stainless steel 1.4305 ~ ASTM 303 and 1.4404 ~ ASTM 316L (V2A/V4A). Of course, our ball-type grease nipples are also available in different angle versions, or as drive-in type.
Type K1
Ball-Type Grease Nipples according to former DIN 3402 straight version A/180 standard versions according to DIN are made of steel, zinc-plated and passivated, with tapered thread for other types and materials, please see table, or upon request
SW L1
GW = thread L1 = overall length L2 = thread length SW = HEX size

L2
GW
L1 14 L1 14
GW
L2 5.5 L2 5.5 L2 5.5 L2 5.5 L2 5.5 L2 5.5
M 5 x 0.8
SW 7mmHEX SW 7mmHEX SW
Ref.- No.: Steel Brass SST303 2100701 2110702 Ref.- No.: Steel Brass SST303 2100703 2110703
GW
SST316L L1 14
M 10 x 1.0
L2 5.5 SW 11mm HEX
SST303
SST316L
GW
M 6 x 0.75
SST316L
GW
L1 14
M 10 x 1.5
L2 5.5 SW 11mm HEX
SST303
SST316L
GW
L1 14
M 6 x 1.0
7mmHEX SW 9mmHEX SW 9mmHEX SW
Ref.- No.: Steel Brass SST303 SST316L 2100704 2110704 2120704 Ref.- No.: Steel Brass 2100905 SST303 SST316L
GW
L1 14
R 1/8, 1/8 - 28 BSP Ref.- No.:

L2 5.5 SW 11mm HEX Steel Brass SST303 2101156 2111156 SST316L
GW
L1 14
M 7 x 1.0
GW
L1 14 L1 14
M 8 x 1.0
GW
L1 16
Ref.- No.: Steel Brass SST303 SST316L 2100907 2110907 2120907 Ref.- No.: Steel Brass 2100908 SST303 SST316L
L2 6.5
R 1/4, 1/4 - 19 BSP Ref.- No.:

SW 14mm HEX
Steel Brass SST303 2101457 2111457
SST316L
GW
M 8 x 1.25
9mmHEX
GW
R 3/8, 3/8 - 19 BSP Ref.- No.:

SW 17mm HEX Steel Brass 2101758 SST303 SST316L
L1 L2 17.5 8
50
Type K2
Ball-Type Grease Nipples according to former DIN 3402 angled version B/45 standard versions according to DIN are made of steel, zinc-plated and passivated, with tapered thread
W WL W
L1
L1
SW
L2 GW SW L3 L2 GW
GW = thread L1 = overall length L2 = thread length L3 = shank length WL = angle length W = angle SW = HEX size
GW GW
L1 19 L2 5.5
M 6 x 1.0
L3
WL 9
W SW 45 9 mm SQ.
SST303 SST316L
L1 14
L2 5.5 L2 5.5 5.5 L2 5.5 5.5 L2 6.5
M 10 x 1.0
L3 WL 9.5 WL 9.5 9.5 WL 9.5 9.5
W SW 45 11mm SQ. W SW 45 11mm HEX 45 11mm HEX W SW 45 11mm SQ. 45 11mm HEX
SST303
SST316L
GW
L1 20 27
M 10 x 1.5
L3 6 9.5 L3
GW
L1 19
L2 5.5
M 8 x 1.0
L3
WL 9
W SW 45 9 mm SQ.
SST303 SST316L
Ref.- No.: Steel Brass SST303 2111471 2204711 Ref.- No.: Steel Brass SST303 2204756 2111460 Ref.- No.: Steel Brass 2201457 SST303
SST316L
GW
L1 14 14
R 1/8, 1/8 - 28 BSP
GW
L1 19 19 20
M 8 x 1.25
L2 5.5 5.5 5.5 L3 WL 9 9 9.5 W SW 45 9mm SQ. 45 11mm HEX 45 11mm HEX
SST316L
GW
L1 22
R 1/4, 1/4 - 19 BSP

L3 WL W SW 11.5 45 14mm HEX
SST316L
Typ K3
Ball-Type Grease Nipples according to former DIN 3402 elbow version C/90 standard versions according to DIN are made of steel, zinc-plated and passivated, with tapered thread
WL
L1 SW
L2 GW
GW
L1 18
M 6 x 1.0
L2 5.5 WL 13 W SW 90 9 mm SQ.
GW
M 10 x 1.0
L2 5.5 WL 14 W SW 90 11mm SQ.
SST303
SST316L
GW
L1 18
M 8 x 1.0
L2 5.5 WL 13 W SW 90 9 mm SQ.
GW
M 10 x 1.5 (cyl.)
L2 5.5 WL 13 W SW 90 11mm HEX
Ref.- No.: Steel Brass SST303 2111469* Ref.- No.: Steel Brass 2304756 Ref.- No.: Steel Brass 2301457
SST316L
GW
L1 18 18 19
L2 5.5 5.5 5.5
M 8 x 1.25
WL 13 13 13
W SW 90 9mm SQ. 90 9mm HEX 90 11mm HEX
Ref.- No.: Steel Brass SST303 2304508 2111461* 2111468*
GW
SST316L L1 18
R 1/8, 1/8 - 28 BSP

L2 5.5 WL 14 W SW 90 11mm SQ.
SST303
SST316L
GW
R 1/4, 1/4 - 19 BSP

L1 L2 22.5 6.5
SST303
SST316L
* cylindric
51
UMETA BALL-T YPE GRE ASE NIPPLES - DRIVE- IN VERSION

APPLICATION AREA By using UMETA grease nipples with drive-in shank, you effectively save the thread-cutting process in the borehole.
VERSIONS Drive-in nipples as standard version are with plain shank, made of steel, zinc-plated and passivated. Upon request, UMETA manufactures drive-in grease nipples in other versions, with respect to the following: dimension material shank length shank type (e. g. serrated ridge) shank diamter surface colour further surface treatment
be driven-in effectively and with care. The exact size of the core hole depends on the material and must be determined by mounting tests. The standard gauge for the installation bore diameter corresponds to the nominal width of the shank .
Drive-in type hydraulic grease nipples should only be lubricated by a hydraulic nozzle.
RECOMMENDATION Drive-in type grease nipples are only suitable for low pressures. Please check whether they can be replaced by self-forming nipples for a better fit.
Drive-in tool
MOUNTING INSTRUCTIONS For straight-type grease nipples, we recommend using the drive-in tool, with which the nipple can
OPERATING INSTRUCTIONS Since this type of grease nipple is only driven in, it may get loose by strong vibrations high back-pressure when greasing with automatic guns pulling off the hydraulic coupler.
Type K1a
Ball-Type Grease Nipples - Drive-in Version according to former DIN 3402 straight version A/180 drive-in-type with plain shank standard versions according to DIN are made of steel, zinc-plated and passivated for other types and materials, please see table, or upon request
L1
Z = shank L1 = overall length L2 = shank length B = collar

L2 Z
Z
L1 14 15
6mm
L2 5.5 6.5 B 8 8
Ref.- No.: Steel Brass SST303 SST316L 2100186 2110186 2120186 2110187 Ref.- No.: Steel Brass SST303 SST316L 2100288 2110288 2120288
Z
L1 14
L2 5.5
10mm
B 12
SST303
SST316L
Z
L1 14
8mm
L2 5.5 B 10
52
Type K2a
Ball-Type Grease Nipples - Drive-in Version according to former DIN 3402 angled version B/45 drive-in-type with plain shank made of steel, zinc-plated and passivated standard versions according to DIN are made of steel, zinc-plated and passivated
W WL
L1 SW L2 Z
Z
L1 19 21
L2 5.5 7
6mm
WL 9 9
W SW 45 9mm SQ. 45 9mm HEX
Ref.- No.: Steel Brass SST303 2204586 2111467 Ref.- No.: Steel Brass SST303 2204588 2111466
Z
SST316L L1 19
10mm
L2 5.5 WL 9.5 W SW 45 11mm SQ.
SST303
SST316L
Z
L1 19 21
L2 5.5 7
8mm
WL 9 9
W SW 45 9mm SQ. 45 9mm HEX
SST316L
Type K3a
Ball-Type Grease Nipples - Drive-in Version according to former DIN 3402 angled version C/90 drive-in-type with plain shank standard versions according to DIN are made of steel, zinc-plated and passivated
WL
L1 SW
L2
Z
L1 18 18 19
6mm
L2 5.5 5.5 5.5 WL 13 13 13 W SW 90 9mm SQ. 90 9mm HEX 90 11mm HEX
Ref.- No.: Steel Brass SST303 2304586 2111462 2111463
SST316L
Z
L1 18 19
8mm
L2 5.5 5.5 WL 13 13 W SW 90 9mm SQ. 90 11mm HEX
Ref.- No.: Steel Brass SST303 2304588 2111464
SST316L
53
UMETA FLUSH -T YPE GRE ASE NIPPLES ACCOR DING TO DIN 3405
APPLICATION AREA Flush-type grease nipples are particularly suitable for installations where extending or protruding nipples cannot be used. VERSIONS In general, our flush-type grease nipples according to DIN are made of steel, zinc-plated and passivated, and they are featured with a cylindrical thread. Of course, our flush-type nipples are also available in different angle versions, with a self-forming thread, or as drive-in type. We offer various standard types also in brass or stainless steel 1.4305 ~ ASTM 303 (V2A). OPERATING INSTRUCTIONS Flush-type nipples are only suitable for pressgreasing by means of a UMETA extension tube or a UMETA push-type grease gun with pin-pointed, pointed, or combi-nozzle.
Upon request, UMETA manufactures flush-type grease nipples in other versions, with respect to the following: dimension material thread size thread form (e. g. with tapered thread) opening pressure surface colour (e. g. yellow passivated) further surface treatment etc.
Type D1
Flush-Type Grease Nipples according to DIN 3405 straight version A/180 standard versions according to DIN are made of steel, zinc-plated and passivated, with cylindrical thread for other types and materials, please see table, or upon request
60
L1 L2
SW

GW
GW
L1 9
M 5 x 0.8
L2 6 L2 6 L2 6 SW 7mmHEX SW 7mmHEX SW
GW
SST303 SST316L L1 9.5
M 10 x 1.5
L2 6.5 L2 9.5 L2 6.5 L2 9.5 SW 11mm HEX SW 14mm HEX SW 11mm HEX SW 14mm HEX SW 17mm HEX SW 7mm HEX
SST303
SST316L
GW
L1 9
M 6 x 0.75
GW
M 12 x 1.5
SST303
SST316L
GW
L1 9
M 6 x 1.0
7mmHEX SW 9mmHEX SW 9mmHEX SW 11mmHEX
Ref.- No.: Steel Brass SST303 SST316L 3100724 3110724 3120724 Ref.- No.: Steel Brass SST303 SST316L 3100925 3110925 3120925 Ref.- No.: Steel Brass SST303 SST316L 3100926 3110926 3120926 Ref.- No.: Steel Brass SST303 SST316L 3101127 3111127 3121127
GW
L1 9.5
G 1/8, 1/8 - 28 BSPP
Ref.- No.: Steel Brass SST303 SST316L 3101161 3111161 3121161 Ref.- No.: Steel Brass SST303 SST316L 3101462 3111462 3121462 Ref.- No.: Steel Brass 3101763 Steel Brass 3100742 SST303 SST316L
GW
L1 9.5
M 8 x 1.0
L2 6.5 L2 6.5 L2 6.5
GW
L1 14
G 1/4, 1/4 - 19 BSPP
GW
L1 9.5
M 8 x 1.25
GW
G 3/8, 3/8 - 19 BSPP
L1 L2 14.5 9
GW
L1 9.5
M 10 x 1.0
GW
L1 9

L2 6 SST303 SST316L
54
Type D2
Flush-Type Grease Nipples according to DIN 3405 angled version B/45 standard versions according to DIN are made of steel, zinc-plated and passivated, with tapered thread
45
L1 SW
GW =thread L1 = overall length L2 = thread length SW = HEX size

L2
GW
L1 15
GW
L2 5.5
M 6 x 1.0
W SW 45 9mm SQ.
Ref.- No.: Steel Brass SST303 3204504 3214504 Ref.- No.: Steel Brass 3204507 Ref.- No.: Steel Brass 3204508
GW
SST316L L1 15
M 10 x 1.0
L2 5.5 W SW 45 11mm SQ.
SST303
SST316L
GW
L1 15
L2 5.5
M 8 x 1.0
GW
W SW 45 9mm SQ.
L2 5.5
R 1/8, 1/8 - 28 BSP Ref.- No.:

W SW 45 11mm SQ.
Steel Brass 3204756
SST303
SST316L
GW
L1 15
L2 5.5
M 8 x 1.25
W SW 45 9mm SQ.
SST303
SST316L
Type D3
Flush-Type Grease Nipples according to DIN 3405 angled version C/90 standard versions according to DIN are made of steel, zinc-plated and passivated, with tapered thread

GW
L1 18
M 6 x 1.0
L2 5.5 W SW 90 9mm SQ.
Ref.- No.: Steel Brass 3304504 Ref.- No.: Steel Brass 3304507 Ref.- No.: Steel Brass 3304508
GW
M 10 x 1.0
L2 5.5 W SW 90 11mm SQ.
SST303
SST316L
GW
L1 18
M 8 x 1.0
L2 5.5 W SW 90 9mm SQ.
GW
R 1/8, 1/8 - 28 BSP Ref.- No.:

L2 5.5 W SW 90 11mm SQ. Steel Brass 3304756 SST303 SST316L
GW
L1 18
M 8 x 1.25
L2 5.5 W SW 90 9mm SQ.
SST303
SST316L
55
FLUSH -T YPE GRE ASE NIPPLES WITH SELF- FORMING THRE AD

APPLICATION AREA By using UMETA grease nipples with self-forming thread (SFT / SFG) you effectively save the thread-cutting process in the borehole. VERSIONS For safety reasons and in order to avoid abrasion wear, the DIN standard for grease nipples with self-forming thread demands a specific surface hardness of 650 HV minimum as well as a particularly wide flank angle of 105 at the thread. Therefore, we operate this decisive process in our own curing oven. For a better visual distinction, UMETA self-forming grease nipples are yellow passivated. Upon request, they are also available in another surface colour, e. g. blue passivated = silver coloured. MOUNTING INSTRUCTIONS The special thread angle and the specific hardness level allow these grease nipples to be driven and screwed into holes without prior thread cutting. Thus, the thread of the grease nipple forms its counter thread. Later, the grease nipple can easily be screwed out and be replaced by a standard grease nipple. The exact size of the core hole depends on the material and must be determined by mounting tests. The consistency of the receiving material is decisive.The standard gauge for the installation bore diameter of 0.4-0.5 mm (0.02") below nominal width have proved in daily use. OPERATING INSTRUCTIONS As suitable lubricating nozzle, we recommend our pointed nozzles.
105
7,5
flank angle Flankenwinkel
Type D1/S
Flush-Type Grease Nipples with Self-Forming Thread according to DIN 3405 straight version A/180 with self-forming thread, tapered standard version made of steel, case-hardened according to DIN (650HV) and yellow passivated
60
SW
L1 L2
SFG = self-forming thread (SFT) L1 = overall length L2 = thread length SW = HEX size
SFG
SFG
L1 8.5
S6x1
L2 5.5 SW 7mmHEX
Ref.- No.: Steel not available in other materials 3100774 Ref.- No.: Steel not available in other materials 3100975
SFG
L1 8.5
S 10 x 1
L2 5.5 SW 11mm HEX
SFG
L1 8.5
S8x1
L2 5.5 SW 9mmHEX
56
FLUSH -T YPE GRE ASE NIPPLES - DRIVE- IN VERSION

APPLICATION AREA By using UMETA grease nipples with drive-in shank, you effectively save the thread-cutting process in the borehole. VERSIONS Drive-in nipples as standard version are with plain shank, made of steel, zinc-plated and passivated. Upon request, UMETA manufactures drive-in grease nipples in other versions, with respect to the following: dimension material shank length shank type (e. g. serrated ridge) shank diamter surface colour further surface treatment MOUNTING INSTRUCTIONS The exact size of the core hole depends on the material and must be determined by mounting tests. The standard gauge for the installation bore diameter corresponds to the nominal width of the shank . OPERATING INSTRUCTIONS Since this type of grease nipple is only driven in, it may get loose by strong vibrations high back-pressure when greasing with automatic guns Drive-in type grease nipples, flush-type, should only be lubricated by a pointed nozzle. RECOMMENDATION Drive-in type grease nipples are only suitable for low pressures. Please check whether they can be replaced by self-forming nipples for a better fit.
Type D1a
Flush-Type Grease Nipples - Drive-in Version according to DIN 3405 straight version A/180 drive-in-type with plain shank standard versions according to DIN are made of steel, zinc-plated and passivated for other types and materials, please see table, or upon request
Z = shank L1 = overall length L2 = shank length B = collar

Z
L1 7.5
L2 5.5
5mm
B 8
Z
SST303 SST316L L1 9.5
L2 6.5
8mm
B 10
Ref.- No.: Steel Brass SST303 SST316L 3100288 3110288 3120288 Ref.- No.: Steel Brass SST303 3100389 3110389
Z
L1 7.5
6mm
L2 5.5 B 8
Z
L1 9.5
10mm
L2 6.5 B 12
SST316L
Z
L1 7.5
6.35mm, 1/4" Ref.- No.:

L2 5.5 B 8 Steel Brass 3100187 SST303 SST316L
57
Type D2a
Flush-Type Grease Nipples - Drive-in Version according to DIN 3405 angled version B/45 drive-in-type with plain shank standard versions according to DIN are made of steel, zinc-plated and passivated
Z = shank L1 = overall length L2 = shank length SW = HEX size
Z
L1 15
6mm
L2 5.5 W SW 45 9mm SQ.
Z
10mm
L2 5.5 W SW 45 11mm SQ.
SST303
SST316L
Z
L1 15
8mm
L2 5.5 W SW 45 9mm SQ.
SST303
SST316L
Type D3a
Flush-Type Grease Nipples - Drive-in Version according to DIN 3405 angled version C/90 drive-in-type with plain shank standard versions according to DIN are made of steel, zinc-plated and passivated
Z = shank L1 = overall length L2 = shank length SW = HEX size

Z
L1 18
6mm
L2 5.5 W SW 90 9mm SQ.
Z
10mm
L2 5.5 W SW 90 11mm SQ.
SST303
SST316L
Z
L1 18
8mm
L2 5.5 W SW 90 9mm SQ.
SST303
SST316L
58
FLUSH -T YPE GRE ASE NIPPLES - SPECIAL DESIGNS

VERSIONS The following types are representing only the most commonly used special-type nipples. For individual applications, UMETA manufactures flush-type grease nipples with special equipment in other versions, with respect to the following:
dimension material thread size thread form (e. g. with tapered thread) length
Type DV1
Flush-Type Grease Nipples without collar, with slot for screwdriver for even mounting without projection straight version A/180 made of steel, zinc-plated and passivated, with tapered thread
1,2
GW = thread L1 = overall length

L1 GW
45
L1
GW
GW
L1 10
M 8 x 1.0
GW
SST303 SST316L 5243069 5243021 SST303 SST316L 5243067 L1 10
G 1/8, 1/8 - 28 BSPP Ref.- No.:

Steel Brass 5243019 SST303 SST316L 5243068 SST303 SST316L
GW
L1 10
M 10 x 1.0
GW
L1 13
G 1/4
Type D3 quattro 90
Flush-Type Grease Nipples made of steel, zinc-plated and passivated, with tapered thread
GW = thread L1 = overall length L2 = thread length WL = angle length SW = HEX size

GW
L1 L2 15.5 5.5
M 6 x 1.0
WL 33
W SW 90 11mm SQ.
SST303
SST316L
59
UMETA BUT TON - HE AD GRE ASE NIPPLES ACCOR DING TO DIN 3404
APPLICATION AREA UMETA button-head grease nipples are particularly suitable for lubricating points with a big grease volume because of their specific high flow-rate of grease. As another result of the robust construction, these grease nipples are preferably used in the construction machinery.
VERSIONS The UMETA button-head grease nipples are available in four different sizes: head 10 mm = M4 head 16 mm = M1 head 22 mm = M22 head hexagon-type, Hex size 15 mm = T1 In general, our button-head grease nipples according to DIN are made of steel, zinc-plated and passivated, and they are featured with a cylindrical thread. We offer various standard types also in brass or stainless steel 1.4305 ~ ASTM 303 and 1.4404 ~ ASTM 316L (V2A/V4A).
Upon request, UMETA manufactures button-head grease nipples in other versions, with respect to the following: dimension material thread size thread form (e. g. with tapered thread) opening pressure surface colour (e. g. yellow passivated) further surface treatment etc. MOUNTING INSTRUCTIONS In order to allow for a proper lubrication with all common grease guns, the head space, which is necessary for installation, should be considered (please see table with dimensions). OPERATING INSTRUCTIONS As suitable lubricating nozzle, we recommend our button-head coupler.
60
Type M4
Button-Head Grease Nipples head 10 mm according to DIN 3404 straight version A/180 standard versions according to DIN are made of steel, zinc-plated and passivated, with cylindrical thread for other types and materials, please see table, or upon request

GW
M 6 x 1.0
SW 11mm HEX
L1 L2 13.5 6
SST303
SST316L
GW
M 8 x 1.0
SW 11mm HEX
L1 L2 13.5 6
SST303
SST316L Instructions for installation: necessary space
GW
M 10 x 1.0
SW 11mm HEX
L1 L2 13.5 6
e= SST303 SST316L
50 mm/2-11/64"
r= g=
14 mm/41/64" 30 mm/1-25/64"
m = 26 mm/1-17/64"
GW
G 1/8, 1/8 - 28 BSPP Ref.- No.:

SW 11mm HEX Steel Brass 4201161 SST303 SST316L 4221161
L1 L2 13.5 6
61
Type M1

L1 17
GW
L2 6
M 6 x 1.0
SW 17mm HEX
Ref.- No.: Steel Brass SST303 SST316L 4101704 4111704 4121704 4141704 Instructions for installation: necessary space Ref.- No.: Steel Brass SST303 SST316L 4101707 4111707 4121707 4141707 e= 55 mm/2-11/64" r= g= 16 mm/41/64" 35 mm/1-25/64" m = 32 mm/1-17/64"
GW
L1 17
M 8 x 1.0
L2 6 SW 17mm HEX
GW
L1 17
M 8 x 1.25
L2 6 SW 17mm HEX
GW
L1 17
M 14 x 1.5
L2 6 SW 17mm HEX
SST303 SST316L 4121716
L1 17 20
GW
L2 6 9
M 10 x 1.0
GW
L1 18
M 16 x 1.5
L2 7 SW 17mm HEX
SST316L
GW GW
L1 17
G 1/8, 1/8 - 28 BSPP Ref.- No.:

L2 6 SW 17mm HEX Steel Brass SST303 SST316L 4101761 4111761 4121761 4141761
M 10 x 1.5
L2 6 SW 17mm HEX
L1 17
GW
L1 17
G 1/4, 1/4 - 19 BSPP Ref.- No.:

L2 6 SW 17mm HEX Steel Brass SST303 SST316L 4101762 4111762 4121762 4141762
GW
L1 17
M 12 x 1.0
L2 6 SW 17mm HEX
SST303
SST316L
GW
L1 18
G 3/8, 3/8 - 19 BSPP Ref.- No.:

L2 7 SW 17mm HEX Steel Brass SST303 SST316L 4101763 4111763 4121763 4141763 Ref.- No.: Steel Brass 4101768
GW
L1 17
M 12 x 1.5
L2 6 SW 17mm HEX
GW
1/4" - 18 NPT/PTF
L1 L2 21 10 21.5 11
SST303
SST316L 4141768
GW
L1 17
L2 6
M 12 x 1.75
SW 17mm HEX
SST303 SST316L 4121715
62
Type M22

GW
M 10 x 1.0
SW 22mm HEX SW 22mm HEX SW 22mm HEX SW 22mm HEX SW 22mm HEX
L1 L2 23.5 9.5
SST303
SST316L
GW
M 16 x 1.5
L1 L2 21.5 8
Ref.- No.: Steel Brass SST303 SST316L 4302219 4312219 4322219 Steel Brass SST303 SST316L 4302262 4312262 4322262 Steel Brass SST303 SST316L 4302263 4312263 4322263 Steel Brass 4302264 SST303 SST316L
GW
G 1/4, 1/4 - 19 BSPP Ref.- No.:

Instructions for installation: necessary space e= 60 mm/2-3/8" r= g= 18 mm/23/32" 45 mm/1-25/32" m = 36 mm/1-27/64"
L1 L2 21.5 8
GW
G 3/8, 3/8 - 19 BSPP Ref.- No.:
L1 L2 21.5 8
GW
G 1/2, 1/2 - 14 BSPP Ref.- No.:
L1 L2 21.5 8
Type M22/L
Button-Head Grease Nipples head 22 mm with extended neck according to DIN 3404 straight version A/180 standard versions according to DIN are made of steel, zinc-plated and passivated, with cylindrical thread for other types and materials, please see table, or upon request
GW = thread L1 = overall length L2 = thread length L3 = neck length SW = HEX size

L1 28
GW
L2 L3 11.5 11
G 1/4, 1/4 - 19 BSPP Ref.- No.:

SW 22mm HEX
Steel Brass 4402262
SST303
SST316L
L1 28
GW
L2 L3 11.5 11
G 3/8, 3/8 - 19 BSPP Ref.- No.:

SW 22mm HEX
Steel Brass 4402263
SST303
SST316L Instructions for installation: necessary space
GW
L1 28
L2 L3 11.5 11
G 1/2, 1/2 - 14 BSPP Ref.- No.:

SW 22mm HEX
Steel Brass 4402264
SST303
SST316L
e=
66 mm/2-39/64"
r= g=
18 mm/23/32" 45 mm/1-25/32"
m = 36 mm/1-27/64"
63
Type T1
Button-Head Grease Nipples hexagonal head form, Hex size 15 mm round collar, 14.5 mm straight version A/180 standard version made of steel, zinc-plated and passivated, with cylindrical thread for other types and materials, please see table, or upon request
GW
L1 16
M 6 x 1.0
L2 6 L3 6.2 SW 15mm HEX
SST303
SST316L
e
GW
L1 16
L2 6
M 8 x 1.0
L3 6.2
SW 15mm HEX
SST303
SST316L
Instructions for installation: Instructions for installation: necessary space necessary space e= 55 mm/2-11/64" r= g= 16 mm/41/64" 35 mm/1-25/64" m = 32 mm/1-17/64"
GW
L1 16
M 8 x 1.25
L2 6 L3 6.2 SW 15mm HEX
SST303
SST316L
GW
G 1/4, 1/4 - 19 BSPP

L2 6 L3 6.2 SW 15mm HEX
GW
L1 16
M 10 x 1.0
L2 6 L3 6.2 SW 15mm HEX
SST303
SST316L
GW GW
L1 16
1/4" -28 NF/UNF/SAE Ref.- No.:

L2 6 L3 6.2 SW 15mm HEX Steel Brass 4501537 SST303 SST316L
M 10 x 1.5
L2 6 L3 6.2 SW 15mm HEX
GW
L1 16
L2 6
G 1/8, 1/8 - 28 BSPP

L3 6.2 SW 15mm HEX
SST316L
64
Type T1B
Button-Head Grease Nipples hexagonal head and collar, Hex size 15 mm straight version A/180 standard versions according to DIN are made of steel, zinc-plated and passivated, with cylindrical thread for other types and materials, please see table, or upon request

GW
L1 16
M 6 x 1.0
L2 6 L3 6 SW 15mm HEX
Ref.- No.: Steel Brass SST303 4601504 4611504 Ref.- No.: Steel Brass SST303 4601507 4611507 Ref.- No.: Steel Brass SST303 4601508 4611508
SST316L
GW
L1 16
M 8 x 1.0
SST316L
Instructions for installation: necessary space e= 55 mm/2-11/64" r= g= 16 mm/41/64" 35 mm/1-25/64" Ref.- No.: Steel Brass SST303 SST316L 4601562 4611562 4621562 4641562 Ref.- No.: Steel Brass 5372717 Ref.- No.: Steel Brass m = 32 mm/1-17/64"
L1 16
GW
L2 6
M 8 x 1.25
L3 6
GW
SST316L L1 16
G 1/4, 1/4 - 19 BSPP

SW 15mm HEX
L1 16
GW
L2 6
M 10 x 1.0
L3 6
SW 15mm HEX
Ref.- No.: Steel Brass SST303 SST316L 4601509 4611509 4621509 Ref.- No.: Steel Brass SST303 4601511 4611511
GW
L1 16
G 3/8, 3/8 - 19 BSPP

SST303
SST316L
GW
L1 16
M 10 x 1.25
SST316L
L1 16
GW
L2 6
1/8" - 27 NPT/PTF
L3 6 SW 15mm HEX
SST303
SST316L 4641567
GW
L1 16
M 12 x 1.5
Ref.- No.: Steel Brass SST303 SST316L 4601514 4611514 4621514 Ref.- No.: Steel Brass 4601516
GW
L1 16
L2 6

L3 6 SW 15mm HEX
Steel Brass 4601537
SST303
SST316L
GW
L1 16
M 12 x 1.75
SST303
SST316L
L1 16
GW
L2 6

L3 6 SW 15mm HEX
Steel Brass 4601539
SST303
SST316L
GW
L1 16
G 1/8, 1/8 - 28 BSPP

65
BUT TON - HE AD GRE ASE NIPPLES - SPECIAL DESIGNS

The following types are representing only the most commonly used special-type nipples. For individual applications, UMETA manufactures button-head grease nipples with special equipment in other versions, with respect to the following: dimension material thread size thread form (e. g. with tapered thread) length etc.
Button head grease nipple with check valve Type M1 or Type M22
Type M1, head- 16 mm or Type M22, head- 22 mm straight version A/180 made of steel, zinc-plated and passivated, with tapered thread as high-pressure version with pin valve upon request
Kopf
SW L1 w
L2
GW
GW = thread, L1 = overall length, L2 = thread length, W = angle, SW = HEX size

APPLICATION AREA Due to the special check valve, the lubricating point will be sealed hermetically after the greasing operation. As a result, internal impulse-like pressures up to 1.000 bar (14,500 PSI) can be attained, depending on the respective application. Particularly suitable for the Heavy Industry, Heavy Vehicle Industry. GW
L1 32 70
OPERATING INSTRUCTIONS ATTENTION! During dismantling, utmost caution is required because of the possible pressure load. Dismantling should be done by experienced personnel only!
M 16 x 1.5
L2 12 20 W Typ SW M 22 22mm HEX M1 22mm HEX
Ref.- No.: Steel Brass 5240013 5240020 Ref.- No.: Steel Brass 5376214 Ref.- No.: Steel Brass 5376314 5240048
GW
SST303 L1 21 35
1/4" - 18 NPTF
L2 W Typ SW 10.7 M1 17mm HEX 15 30 M 22 22mm HEX
Ref.- No.: Steel Brass 5240046 5240061 Ref.- No.: Steel Brass 5240062 Ref.- No.: Steel Brass 5240063 5240009
SST303
GW
L1 22
L2 W 11.5
R 1/4, 1/4 - 19 BSP

Typ M1
GW
SST303 L1 33
3/8" - 18 NPT/PTF
L2 14 W Typ SW 60 M 22 22mm HEX
SW 17mm HEX
SST303
GW
L1 23 33
L2 13 13
G 3/8, 3/8 - 19 BSPP

W
GW
SST303
1/2" -14 NPT

W Typ SW M 22 22mm HEX 60 M 22 22mm HEX
Typ SW M1 17mm HEX 60 M 22 22mm HEX
L1 L2 29 13 41.5 19
SST303
66
Button-head grease nipple with screwable protection cap Type M1

head 16 mm straight version A/180 with o-ring for sealing against dust and humidity with cylindrical thread
cap
female thread
GW = thread, L1 = overall length, L2 = thread length, W = angle, SW = HEX size

APPLICATION AREA For additional locking against internal pressure and as protection against contamination. Particularly suitable for plant engineering valves and for exposed lubricating points. GW
L1 31
M 10 x 1.0
L2 11.5 L2 11.5 SW 22mm HEX SW 22mm HEX
GW
SST303 SST316L 5544053 SST303 SST316L L1 31
R 1/4, 1/4 - 19 BSP

L2 11.5 SW 22mm HEX
SST303
SST316L
GW
L1 31
M 12 x 1.5
Button head grease nipple with extension Type M1

head 16 mm straight version A/180 made of steel, zinc-plated and passivated head hardened according to DIN with cylindrical thread with press-fitted extension for exact grease flow
GW = thread L1 = overall length L2 = thread length L3 = installation depth SW = HEX size
2 4
APPLICATION AREA For deep seated lubrication points, which can be serviced sufficiently through the extension, e. g. for drive shafts. GW
L1 40
M 8 x 1.0
SST303
SST316L
67
UMETA BAYONET GRE ASE NIPPLES

APPLICATION AREA An especially strong and reliable connection with the grease nipple will be achieved by using the bayonet coupler. The construction design also results in a specific high flow-rate of grease. Particularly suitable for the Heavy Industry, for example Ship Building. VERSIONS In general, our bayonet nipples are made of steel, zinc-plated and passivated, and they are featured with a tapered thread. We offer various standard types also in brass or stainless steel 1.4305 ~ ASTM 303 (V2A). Upon request, UMETA manufactures bayonet grease nipples in other versions, with respect to the following: dimension material thread size thread form (e. g. with cylindrical thread) opening pressure etc. OPERATING INSTRUCTIONS As suitable lubricating nozzle, we recommend our bayonet coupler.
Type B1
Bayonet Grease Nipples head 9.9 mm straight version A/180 standard version made of steel, zinc-plated and passivated, with tapered thread for other types and materials, please see table, or upon request
GW
L1 25
M 16 x 1.5
L2 6.5 SW 17mm HEX
SST303
SST316L
GW
L1 25
R 3/8, 3/8 - 19 BSP

L2 6.5 SW 17mm HEX
Ref.- No.: Steel Brass SST303 9149417 9157416 Ref.- No.: Steel Brass 9149414
SST316L
GW
L1 24
L2 5.5
R 1/8, 1/8 - 28 BSP Ref.- No.:

SW 11mm HEX
Steel Brass SST303 SST316L 9149415 9155416 9157420
GW
L1 24
L2 5.5
1/8" - 27 NPT/PTF
SW 11mm HEX
SST303
SST316L
GW
L1 25
R 1/4, 1/4 - 19 BSP Ref.- No.:

L2 6.5 SW 14mm HEX Steel Brass SST303 SST316L 9149416 9156416 9157421
GW
L1 25
1/4" - 18 NPT/PTF
L2 6.5 SW 14mm HEX
Ref.- No.: Steel Brass SST303 9109416
SST316L
68
UMETA GRE ASE NIPPLE ASSORTMENTS

UMETA's variety of grease nipple attachments can be trusted to always have the right one available. The kits carry an assortment that should cover all application purposes. In case you require a different assortment, UMETA will be happy to handle this on a case to case basis requiring a minimum order.
Sort 80
Sort 350
Sort 170
Steel, zinc-plated and passivated

consisting of: Ref.- No.: UMETA-Type 1100704 H 1, M 6 x 1.0 1100907 H 1, M 8 x 1.0 1101109 H 1, M 10 x 1.0 1101156 H 1, R 1/8" 1101457 H 1, R 1/4" 1204504 H 2, M 6 x 1.0 1204507 H 2, M 8 x 1.0 1204709 H 2, M 10 x 1.0 1204756 H 2, R 1/8" 1201457 H 2, R 1/4" 1304504 H 3, M 6 x 1.0 1304507 H 3, M 8 x 1.0 1304709 H 3, M 10 x 1.0 1304756 H 3, R 1/8" 1301457 H 3, R 1/4" 4101709 M 1, M 10 x 1.0 4101761 M 1, G 1/8" 4101762 M 1, G 1/4" 4302262 M 22, G 1/4" 7351311 515/G, M 10 x 1.0 Total number of pieces Sort 80 6008100 15 15 10 10 5 5 5 5 5 5 80 Sort 170 6017140 40 30 20 15 10 5 5 5 5 5 5 5 5 5 5 5 170 Sort 350 6035140 50 40 35 30 15 25 20 15 15 10 20 15 15 15 15 5 5 2 350
Stainless steel SST303 (V2A)

consisting of: Ref.- No.: UMETA-Type 1120704 H 1, M 6 x 1.0 1120907 H 1, M 8 x 1.0 1121109 H 1, M 10 x 1.0 1121156 H 1, R 1/8" 1121457 H 1, R 1/4" 1220904 H 2, M 6 x 1.0 1220907 H 2, M 8 x 1.0 1221109 H 2, M 10 x 1.0 1221156 H 2, R 1/8" 1320904 H 3, M 6 x 1.0 1320907 H 3, M 8 x 1.0 1321109 H 3, M 10 x 1.0 1321156 H 3, R 1/8" 4121709 M 1, M 10 x 1.0 4121761 M 1, G 1/8" 4121762 M 1, G 1/4" Total number of pieces Sort 80 6008102 15 15 10 10 5 5 5 5 5 5 80 Sort 170 6017141 40 30 20 15 10 5 5 5 5 5 5 5 5 5 5 5 170 Sort 350 upon request
dimension (L x W x H) in cm: Sort 80 = 17.0 x 11,5 x 3.0 Sort 170 = 21.0 x 13,0 x 3.5 Sort 350 = 25.0 x 18,0 x 4.5
69
UMETA ACCESSORIES FOR GRE ASE NIPPLES UMETA Plastic Protection Caps
suitable for grease nipples with hydraulic head according to DIN 71412 suitable for a temperatur of approx. - 70C up to + 85C The protection caps are available with or without straps and in various colours. They are used for protecting the lubricating point against contamination and for indicating the lubricating intervals by colour coding.
Type SK-R SK-RL SK-V SK-VL Ref.- No.: 9500110 9500111 9500120 9500121 Type SK-G SK-GL SK-B SK-BL Ref.- No.: 9500130 9500131 9500140 9500141
UMETA Rubber Protection Caps

suitable for grease nipples with button head M1 according to DIN 3404
suitable for grease nipples with button head M1 according to DIN 3404 Ref.- No.: 9500210
UMETA Alu Protection Caps

suitable for grease nipples with hydraulic-type or button-head according to DIN 71412 and DIN 3404 suitable for a temperatur of - 30C up to + 120C For an especially easy clip-on and take-off. Optionally our aluminium protection caps can be anodised in colours for indicating the lubricating intervals.
suitable for grease nipples with hydraulic head according to DIN 71412 button head M1 according to DIN 3404 Ref.- No.: 9500200 9500201
UMETA Drive-in Tool

for safe drive-in of straight drive-in or serrated ridge nipples
suitable for grease nipples with ball-type or hydraulic head according to DIN ball-type or hydraulic head according to SAE Ref.- No.: 5800058 5800059
70
GRE ASE FIT TINGS
ACCOR DING TO S A E J - 534 Umeta gre ase Fit tings ACCOR DING TO S A E J - 534
VERSIONS In general, our grease fittings according to SAE are made of steel, case hardened, zinc-plated, passivated and featured with a special surface treatment. For safety reasons and in order to avoid abrasion wear, the standard for SAE-grease fittings demands a specific surface hardness of 83 HR15 N minimum according to Rockwell hardness test procedure. SPECIAL INFORMATION For a better overview we added the international Alemite-reference numbers to our grease fittings. A general comparison of the relevant types you will find on page 78. OPERATING INSTRUCTIONS As suitable lubricating nozzle for our hydraulic-type fittings, we recommend our hydraulic couplers.
Umeta HYDr aULiC-t YPe gre ase Fit tings ACCOR DING TO S A E J - 534
The SAE-standard for hydraulic-type grease fittings requires a tapered thread. The standard head- is 6.6 (+/- 0.3) mm / 0.26" (+/- 0.012").
Type H1
Hydraulic-type grease Fittings according to SAE J-534 straight version A/180 standard versions according to SAE are made of steel, hardened, zinc plated, passivated and top coated salt spray resistance > 72 hours
GW = thread L1 = overall length L2 = thread length L3 = shank length SW = HEX size
GW
L1 11/16" 9/16" 1 1/4" 1 3/4" 2 5/8" 3/4" 1"
1/8" PtF
L2 5/32" 5/32" 5/16" 5/16" 5/16" 3/16" 9/32" L3 SW 19/64" 7/16"HEX 15/64" 7/16"HEX 25/32" 7/16"HEX 1 17/64" 7/16"HEX 2 3/16" 3/8"HEX 5/16" 7/16"HEX 5/16" 1/2"HEX
Ref.- No.: Steel 5546006 5546008 5546010 5546012 5546014 *1) 5546016
GW
SST303 Alemite 1610-BL 1644-B 1607-B 1669-B 1684-B 5546086 1961-S 1618-B L1 33/64"
1/4" - 28 UnF-2a
L2 5/64" L3 5/32"
SW 9/32"HEX
Ref.- No.: Steel SST303 5546106 Ref.- No.: Steel *2) 5547001 Ref.- No.:
Alemite 1792-B
GW
L1 20 mm
3/8" - 18 nPtF
L2 8 mm L3 SW 17 mm HEX
SST303
Alemite
GW GW
L1 7/8" 7/8"
6/40" UnF-2a
L2 7/64" L3 1/8" SW 1/4"HEX
1/4" PtF
L2 15/64" 25/64" L3 27/64" 27/64" SW 9/16"HEX 15 mm HEX
Ref.- No.: Steel SST303 Alemite 5546028 1627-B 5546154 Ref.- No.: Steel SST303 5546030 5546032 5546034 5546036 5546038 5546087
L1 1/2"
Steel *3) 5546507 Ref.- No.:
SST303
Alemite 3018
GW
L1 1/2"
10/32" UnF-2a
L2 7/64" L3 1/8" SW 1/4"HEX
GW
L1 35/64" 11/16" 31/32" 1 1/8" 1 5/8" 17/32"
1/4" - 28 sae-Lt
L2 7/64" 13/64" 13/64" 13/64 13/64" 7/64" L3 3/16" 23/64" 5/8" 25/32" 1 9/32" 3/16" SW 5/16"HEX 5/16"HEX 5/16"HEX 5/16"HEX 5/16"HEX 5/16"HEX
Steel *3) 5546503
SST303
Alemite 3016
Alemite 1641-B 1652-B 1680-B 1698-B 3014-B 1966-S
type H1 Hydraulic-type grease Fitting with pin valve, leakproof GW 1/8" PtF Ref.- No.:
L1 3/4" L2 17/64" L3 5/16" SW 7/16"HEX Steel 5546110 SST303 Alemite 1650
*1) female thread *2) molybdenum-surface finish *3) no ball check

71
Type H2
Hydraulic-type grease Fittings according to SAE J-534 elbow version B - 30/45/65/67 optionally available with square or hexagonal body standard versions according to SAE are made of steel, zinc-plated, passivated and top coated, head hardened salt spray resistance > 72 hours
W WL WL W
L1 L1 L3 SW
L2 GW
L3 L2 GW
SW
GW
L1 29/32" 29/32" 57/64" 27/32" 1 7/32" 2 3/4" 61/64"
1/8" PtF
L2 19/64" 19/64" 3/16" 3/16" 3/16" 11/32" 7/32" L3 19/64" 19/64" 19/64" 19/64" 9/16" 2 1/4" 11/32" WL 11/32" 11/32" 29/46" 1/2" 1/2" 1/2" 1/2" W SW 30 7/16" HEX 30 7/16" HEX 45 7/16" HEX 65 7/16" HEX 65 7/16" HEX 65 3/8" HEX 67 7/16" HEX
Ref.- No.: Steel 5546152 5546017 5546018 5546020 5546022
SST303
Alemite 1611-B 5546153 1921-S 1688-B 1612-B 1623-B 1649-B 5546090 1922-S
GW
L1 13/16" 25/32" 13/16"
1/4" - 28 sae-Lt
L2 7/64" 13/64" 13/64" L3 13/64" 19/64" 13/64"
WL 13/32" 15/32" 19/32"
W SW 45 3/8" HEX 65 3/8" HEX 45 3/8" HEX
Ref.- No.: Steel 5546040 5546042
SST303
Alemite 1637-B1 3010-B1 5546085 1968-S
GW
L1 L2 39/64" 5/64"
1/4" - 28 UnF-2a
L3 1/8"
WL W SW 13/32" 45 *9 mm SQ
Ref.- No.: Steel 5546108
SST303
Alemite 1770-B1
Type H3
Hydraulic-type grease Fittings according to SAE J-534 elbow version C/90 standard versions according to SAE are made of steel, zinc-plated, passivated and top coated, head hardened salt spray resistance > 72 hours
90 WL
L1 L3 L2 GW SW
GW
1/8" PtF
L2 3/16" 5/16" 7/32" L3 19/64" 1 1/4" 11/32" WL 17/32" 17/32" 17/32" W SW 90 7/16" HEX 90 7/16" HEX 90 7/16" HEX
L1 27/32" 1 13/16" 7/8"
Ref.- No.: Steel 5546024 5546026
SST303
Alemite 1613-B 1606-B 5546088 1923-S
GW
L1 3/4" 3/4"
1/4" - 28 sae-Lt
L2 7/64" 7/64" L3 13/64" 13/64" WL 1/2" 1/2" W SW 90 3/8" HEX 90 3/8" HEX
SST303
Alemite 1911-B1 5546089 1969-S
*cylindrical
72
GRE ASE FIT TINGS
ACCOR DING TO S A E J - 534 HYDr aULiC gre ase Fit tings WitH seLF- FOrming tHre aD ACCOR DING TO S A E J - 534
VERSIONS For safety reasons and in order to avoid abrasion wear, the standard for SAE-grease fittings demands a specific surface hardness of 83 HR15 N minimum according to Rockwell hardness test procedure. Furthermore, a particularly wide flank angle of 90 at the thread is stipulated therein. For a better visual distinction, UMETA self-forming grease fittings are yellow passivated. Upon request, they are also available in another surface colour, e. g. blue passivated = silver coloured. MOUNTING INSTRUCTIONS The exact size of the core hole depends on the material and must be determined by mounting tests. The consistency of the receiving material is decisive. The standard gauge for the installation bore diameter of 0.4-0.5 mm (0.02") below nominal width have proved in daily use. The recommended borehole is listed with the part number. OPERATING INSTRUCTIONS As suitable lubricating nozzle, we recommend our hydraulic couplers.
flank angle (X)

90
5
Type H1/S
Hydraulic-type grease Fittings with self-Forming thread according to SAE J-534 straight version A/180 with self-forming thread, tapered standard version made of steel, according to SAE hardened, yellow passivated and top coated salt spray resistance > 72 hours
SW L1 X L2
SFG = self-forming thread (SFT) L1 = overall length L2 = thread length SW = HEX size X = flank angle
SFG
SFG
L1 5/8"
1/8" special taper Pipe thread

L2 15/16" for bore- SW 0.373-0.380" 7/16" HEX
SFG
Alemite 1720-B L1 37/64"
1/4" - 28 special taper thread

L2 13/64" for bore- SW 0.230"-0.235" 5/16" HEX
Alemite 3038-B
Type H2/S
Hydraulic-type grease Fittings with self-Forming thread according to SAE J-534 elbow version B - 45/65 with self-forming thread, tapered standard version made of steel, according to SAE hardened, yellow passivated and top coated salt spray resistance > 72 hours
WL
L1 L2
SFG
SW X
SFG = self-forming thread (SFT) L1 = overall length L2 = thread length WL = angle length W = angle SW = HEX size X = flank angle
SFG
L1 3/4"
1/8" special taper Pipe thread

L2 WL 13/64" 1/2" W 65 for bore- SW 0.373-0.380" 7/16" HEX
Ref.- No.: Steel Alemite 5546054 1722-B
SFG
L1 L2 WL W 13/16" 13/64" 25/64" 45
for bore- SW 0.230"-0.235" 3/8" HEX
73
Type H3/S
Hydraulic-type grease Fittings with self-Forming thread

WL
90
according to SAE J-534 elbow version C/90 with self-forming thread, tapered standard version made of steel, according to SAE hardened, yellow passivated and top coated salt spray resistance > 72 hours SFG 1/8" special taper Pipe thread
for bore- SW 0.373-0.380" 7/16" HEX L1 L2 WL W 49/64" 13/64" 17/32" 90 Ref.- No.: Steel Alemite 5546056 1723-B
L1 SW SFG
L2
SFG = self-forming thread (SFT) L1 = overall length L2 = thread length WL = angle length W = angle SW = HEX size X = flank angle
SFG
L1 3/4"

L2 WL 13/64" 1/2" W 90 for bore- SW 0.230"-0.235" 3/8" HEX
Umeta HYDr aULiC-t YPe gre ase Fit tings - DriVe- in VersiOn (US A V ER SION)
VERSIONS Drive-in fittings as standard version are made of steel, case-hardened, zinc-plated, passivated and top coated. MOUNTING INSTRUCTIONS The exact size of the core hole depends on the material and must be determined by mounting tests. The standard gauge for the installation bore diameter corresponds to the nominal width of the serrated ridge-. OPERATING INSTRUCTIONS Since this type of grease fitting is only driven in, it may get loose by strong vibrations high back-pressure when greasing with automatic guns pulling off the hydraulic coupler. Drive-in type hydraulic grease fittings should only be lubricated by a hydraulic nozzle.
Type H1a
Hydraulic-type grease Fittings - Drive-in type straight version A/180 with serrated ridge standard version made of steel, according to SAE hardened, zinc plated, passivated and top coated salt spray resistance > 72 hours SZ 5/16"
SZ B 5/16" 3/8" 5/16" 3/8"
SZ = drill size L1 = overall length L2 = shank length B = collar
SZ
L1 15/32" 31/64" 33/64" 5/8"
3/16"
L2 11/64" 7/32" 1/4" 1/4"
SZ B 3/16" 5/16" 3/16" 9/32" 3/16" 5/16" 3/16" 5/16" SZ B 1/4" 11/32" 1/4" 11/32" 1/4" 11/32"
Ref.- No.: Steel *5546060 *5546062 5546064 *5546066 Ref.- No.: Steel 5546068 *5546070 *5546072
Alemite 3005 3006 1728-B 1633 Alemite 1743-B 321381 1952
L1 L2 35/64" 1/4" 5/8" 7/32"
Ref.- No.: Steel 5546074 *5546076 Ref.- No.: Steel 5241043 Ref.- No.: Steel *5546078
Alemite 1608-B 1699 Alemite 1666 Alemite 1666 *no ball check
SZ
6.35 mm, 1/4"
L1 L2 SZ B 15 mm 6.3 mm 6.35 mm, 1/4" 8 mm
SZ
L1 35/64" 9/16" 15/32"
1/4"
L2 1/4" 17/64" 1/8"
SZ
L1 L2 37/64" 7/32"
3/8"
SZ B 3/8" 7/16"
74
GRE ASE FIT TINGS
ACCOR DING TO S A E J - 534 Type H2a

Hydraulic-type grease Fittings - Drive-in type
WL
elbow version B/45/67 with serrated ridge standard version made of steel, according to SAE zinc plated, passivated and top coated, head hardened salt spray resistance > 72 hours
L1 SW L2 SZ
SZ = drill size L1 = overall length L2 = shank length WL = angle length W = angle SW = HEX size
SZ
L1 53/64" 45/64"
3/16"
L2 7/32" 7/32" WL 13/32" 1/2" W 45 65 SZ 3/16" 3/16" SW 3/8" HEX 3/8" HEX
Ref.- No.: Steel Alemite 5546080 1992-B1 5546082 1646-B1
Hydraulic-type grease Fittings - rivet type designed for mounting on the back side of thin-walled sheet metal standard version made of steel, according to SAE hardened, zinc plated, passivated and top coated salt spray resistance > 72 hours
.318
L1 L3 L2 B
B = collar L1 = overall length L2 = collar height L3 = installation depth B = recommended hole size
L1 1/2"
5/16"
L2 5/128"
L3 15/64"
for bore B 5/16" 3/8"
Umeta FLUsH -t YPe gre ase Fit tings (US A V ER SION) Type D1
Flush-type grease Fittings straight version A/180 made of steel, zinc plated, passivated and top coated salt spray resistance > 72 hours
GW
L1 13/32"
1/4" - 28 nF
L2 3/16" L3 19/64" SW 5/16" HEX
Ref.- No.: Steel Alemite 5546130 1851
75
Type DV1
Flush-type grease Fittings without collar, with slot for screwdriver for even mounting without projection straight version A/180 made of steel, zinc-plated, passivated and top coated salt spray resistance > 72 hours
5546124
5546128 GW = thread L1 = overall length L2 = thread length
GW
1/8" nPtF Ref.- No.:

Steel Alemite 5546124 1815 5546126 1452
GW
L1 9/16"
1/4" nPtF Ref.- No.:

L2 Steel Alemite 5546128 Z741-A
L1 L2 23/64" 19/64" 17/32"
5546126
Umeta BUt tOn - He aD gre ase Fit tings ACCOR DING TO S A E J - 534 Type M1
Button-Head grease Fittings head 15.5 mm (5/8") according to SAE J-534 straight version A/180 standard versions according to SAE are made of steel, hardened, zinc plated, passivated and top coated salt spray resistance > 72 hours GW
L1 3/4" GW = thread L1 = overall length L2 = thread length L3 = shank length SW = HEX size
1/8" PtF
L2 3/16"
L3 11/32"
SW 5/8" HEX
Ref.- No.: Steel SST303 5546112
GW
Alemite 1184-B L1 53/64" 53/64"
1/4" nPtF
L2 17/64" 17/64"
L3 27/64" 27/64"
SW 5/8" HEX 5/8" HEX
Ref.- No.: Steel SST303 *5546114 5546116
Alemite A1186 1186-B
according to ISO 2768-m
Type M1
Button-Head grease Fittings

SW
- stainless steel
head 15.5 mm (5/8") according to ISO 2768 - m straight version A/180 made of stainless steel 1.4305 ~ ASTM 303 (V2A)
SW 17 mm HEX Ref.- No.: Steel SST303 Alemite 5547020 Ref.- No.: Steel SST303 Alemite 5547021 -
L1 L3
L2
GW
GW
L1 18 mm
1/8" PtF
L2 4.8 mm L3 7.5 mm
GW
L1 L2 23.5 mm 13 mm
3/8" nPtF
L3 13 mm
SW 19 mm HEX
Ref.- No.: Steel
SST303 Alemite 5547022 *with plunger check
GW
L1 21 mm
1/4" - 18 nPtF
L2 L3 SW 6.75 mm 10.7 mm 17 mm HEX
76
GRE ASE FIT TINGS
ACCOR DING TO S A E J - 534 Type M22

Umeta Button-Head grease Fittings with plunger check head 21.9 mm (7/8") according to SAE J-534 straight version A/180 standard versions according to SAE are made of steel, hardened, zinc plated, passivated and top coated salt spray resistance > 72 hours GW
L1 1 1/6"
1/2" n.PtF
L2 25/64" L3 1/2" SW 7/8" HEX
Ref.- No.: Steel SST303 *5546120
Alemite 1820-1
*with plunger check
Umeta aDaP ter (US A V ER SION)

adapters / elbow bodies
GW 2
elbow version 180/45/90 optionally available with square or hexagonal body standard version made of steel, according to SAE zinc plated, passivated and top coated salt spray resistance > 72 hours GW1 (M) 1/8" - 27 nPt/PtF
L1 1" 1 1/8" L1 3/4" 13/16" 1 1/32" L2 7/32" 17/64" L2 13/64" 13/64" 7/32" W GW2 (F) SW 45 1/8" - 27 NPT/PTF 1/2" SQ 90 1/8" - 27 NPT/PTF 1/2" SQ W 180 45 90 GW2 (F) 1/8"-NPTF 1/8"-NPTF 1/8"-NPTF SW 1/2" HEX 1/2" HEX 1/2" SQ Ref.- No.: Steel 5546134 5546132 Ref.- No.: Steel 5546135 5546157 5546159 Alemite 43716 43706 Alemite 51942 310912 51943
SW L1
GW1 = thread (M) L1 = overall length L2 = thread length W = angle SW = HEX size GW2 = adapter thread (F)
L2 GW 1
SW
GW 2 L1
GW1 (M) 1/4" - 28 nF/UnF/sae
L2 GW 1
Umeta gre ase Fit ting assOrtments ACCOR DING TO S A E J - 534

UMETA's grease fitting assortments ensure you always have the right one available. The kits carry an assortment that should cover all application purposes. sort 110 standard version according to SAE, made of steel, hardened, zinc plated, passivated and top coated salt spray resistance > 72 hours
Sort 110 consisting of: Ref.- No.: UMETA-Type 5546006 H1, 1/8" PTF, 11/16" 5546040 H2, 1/4" - 28 SAE-LT, 13/16" 5546024 H3, 1/8" PTF, 27/32" 5546030 H1, 1/4" - 28 SAE-LT, 35/64" 5546017 H2, 1/8" PTF, 57/64" 5546044 H3, 1/4" - 28 SAE-LT, 3/4" Total number of pieces
Alemite-Type 1610-BL 1637-B1 1613-B 1641-B 1688-B 1911-B1
6110100 Steel Quantity 25 15 15 25 15 15 110
77
Umeta tUrneD Parts ACCOR DING TO S A E J - 534

Plugs according to SAE J-534 for subsequent closing of boreholes made of steel, zinc-plated, passivated and top coated salt spray resistance > 72 hours GW
L1 1/4"
SW
L1 L2
1/4" - 28 UnF-2a
L2 3/16" Thread 5/16" HEX
GW
Alemite 328224
Plugs with self-Forming thread according to SAE J-534 with self-forming thread, tapered standard version made of steel, hardened according to SAE (650HV) and yellow passivated salt spray resistance > 72 hours recommanded hole size = 0.02" below nominal width SFG
L1 21/64"
SFG = thread L1 = overall length L2 = thread length SW = HEX size X = flank angle B = recommended hole size

L2 3/16" for bore- SW 0.230"-0.235" 5/16" HEX
Alemite 328435
International Reference Chart

ref.- no.: UMETA Alemite 5241043 5546006 1610-BL 5546008 1644-B 5546010 1607-B 5546012 1669-B 5546014 1684-B 5546016 1618-B 5546017 1688-B 5546018 1612-B 5546020 1623-B 5546022 1649-B 5546024 1613-B 5546026 1606-B 5546028 1627-B 5546030 1641-B 5546032 1652-B 5546034 1680-B 5546036 1698-B 5546038 3014-B 5546040 1637-B1 5546042 3010-B1 5546044 1911-B1 5546046 3038-B 5546048 3053-B 5546050 3054-B Page 74 71 71 71 71 71 71 72 72 72 72 72 72 71 71 71 71 71 71 72 72 72 73 73 74 5546052 5546054 5546056 5546060 5546062 5546064 5546066 5546068 5546070 5546072 5546074 5546076 5546078 5546080 5546082 5546085 5546086 5546087 5546088 5546089 5546090 5546106 5546108 5546110 5546112 5546114 5546116 1720-B 1722-B 1723-B 3005 3006 1728-B 1633 1743-B 321381 1952 1608-B 1699 1666 1992-B1 1646-B1 1968-S 1961-S 1966-S 1923-S 1969-S 1922-S 1792-B 1770-B1 1650 1184-B A1186 1186-B 73 73 74 74 74 74 74 74 74 74 74 74 74 75 75 72 71 71 72 72 72 71 72 71 76 76 76 5546120 5546122 5546124 5546126 5546128 5546130 5546132 5546134 5546135 5546138 5546140 5546152 5546153 5546154 5546157 5546159 5546503 5546507 5547001 5547020 5547021 5547022 6110100 1820-1 1675-B 1815 1452 Z741-A 1851 43706 43716 51942 328224 328435 1611-B 1921-S 310912 51943 3016 3018 77 75 76 76 76 75 77 77 77 78 78 72 72 71 77 77 71 71 71 76 76 76 77 ref.- no.: Page Alemite UMETA 1452 5546126 76 1633 5546066 74 1650 5546110 71 1666 5546078 74 1699 5546076 74 1815 5546124 76 1851 5546130 75 1952 5546072 74 3005 5546060 74 3006 5546062 74 3016 5546503 71 3018 5546507 71 43706 5546132 77 43716 5546134 77 51942 5546135 77 51943 5546159 77 1184-B 5546112 76 1186-B 5546116 76 1606-B 5546026 72 1607-B 5546010 71 1608-B 5546074 74 1610-BL 5546006 71 1611-B 5546152 72 1612-B 5546018 72 1613-B 5546024 72 1618-B 1623-B 1627-B 1637-B1 1641-B 1644-B 1646-B1 1649-B 1652-B 1669-B 1675-B 1680-B 1684-B 1688-B 1698-B 1720-B 1722-B 1723-B 1728-B 1743-B 1770-B1 1792-B 1820-1 1911-B1 1921-S 1922-S 1923-S 5546016 5546020 5546028 5546040 5546030 5546008 5546082 5546022 5546032 5546012 5546122 5546034 5546014 5546017 5546036 5546052 5546054 5546056 5546064 5546068 5546108 5546106 5546120 5546044 5546153 5546090 5546088 71 72 71 72 71 71 75 72 71 71 75 71 71 72 71 73 73 74 74 74 72 71 77 72 72 72 72 1961-S 1966-S 1968-S 1969-S 1992-B1 3010-B1 3014-B 3038-B 3053-B 3054-B A1186 Z741-A 310912 321381 328224 328435 5546086 5546087 5546085 5546089 5546080 5546042 5546038 5546046 5546048 5546050 5546114 5546128 5546157 5546070 5546138 5546140 5241043 5546154 5547001 5547020 5547021 5547022 6110100 71 71 72 72 75 72 71 73 73 74 76 76 77 74 78 78 74 71 71 76 76 76 77
78
T u r n e d Pa r T s
Turned parTs
From prototype to series production-readiness! Umeta is the right partner for you and your turned parts projects. We support you from the very first development stage through initial sampling right up to series production-readiness. Manufacturing special turned parts is one of our strengths, whether in small or large series. Our machinery consists of long CNC-controlled lathes and capstan lathes. We also provide assembly services and the manufacture of complete component groups as an option. This means we can offer complex machining facilities. You will find locking plugs and air release valves in the standard programme of our turned parts division, and we would like to show you a few samples of further production facilities below.
uMeTa Turned parTs aT a gl ance

- production batches from 1 piece - raw material measurements from 3 mm to 42 mm - turning lengths up to 600 mm - machining of all removable materials - high-precision production of complex contours(tolerance ranges of 0.02 mm and a surface roughness Rz of 1.0 m are possible) - axial and radial milling / drilling with lathing of bars - eccentric drilling with axial machining - extensive machining of front and back sides with lathing of bars - changes in machining contours can be realised quickly and economically by programming the parameters
ex a Mples of M achining faciliTies

chain tensioner (machining of front, back, air release goove) bayonet top (radial milling of shell) clamping hydraulic body (radial two-step drilling/apply to spanner flat)
injection nozzle (axial/radial machining, long turned parts, assembling)
79
air bleed valves

The standard air bleed valves for venting and avoidance of undesirable pressure increases are zinc-plated and passivated, and they are featured with a tapered thread. The following types are representing a selection of the most commonly used air bleed valves. Upon request, UMETA manufactures air bleed valves in other versions, with respect to the following: opening pressure dimension material thread size thread form (e. g. with cylindrical thread) further surface treatment etc.
air bleed valves for venting gears for the avoidance of undesirable pressure increases in universal joints made of steel, zinc-plated and passivated, with tapered thread for other types and materials, please see table, or upon request
SW = HEX size L1 = overall length L2 = thread length GW = thread (all measures in mm)
GW
L1 11 11
M 6 x 1.0
L2 7 7 SW 7 mm HEX 7 mm HEX Opening pressure approx. 3 bar approx. 8-12 bar
sW 11
L2 6
Ref.- No.: Steel 5270020 5270022 Ref.- No.: Steel 5244082
GW
SST303 SST316L
M 10 x 1.0
Opening pressure approx. 2.5 bar approx. 5 bar approx. 5 bar approx. 7.5 bar
GW
L1 11.6
M 8 x 1.0
L1 L2 SW 11.6 4 11 mm HEX 11.6 6 11 mm HEX 11.6 6 11 mm HEX * with BUNA ball 11.6 6 11 mm HEX
Ref.- No.: Steel 5244084 5244085 5244089 Ref.- No.: Steel 5800017 5244086
SST303 SST316L 5244083 5244088 * 5244080
SW 11 mm HEX
Opening pressure approx. 2.5 bar
SST303 SST316L
GW
L1 11.6 11.6
r 1/8, 1/8 - 28 bsp

L2 6 6 SW 11 mm HEX 11 mm HEX Opening pressure approx. 2.5 bar approx. 5 bar
SST303 SST316L 5244087
*with BUNA ball
80
T u r n e d Pa r T s
locking plugs
The standard locking plugs for closure of bore-holes are made of steel, zinc-plated and passivated, and they are featured with a tapered thread. The following types are representing a selection of the most commonly used locking plugs. Upon request, UMETA manufactures locking plugs in further versions, with respect to the following: locking plugs for subsequent closing of boreholes made of steel, zinc-plated and passivated, with tapered thread for other types and materials, please see table, or upon request dimension material thread size thread form (e. g. with cylindrical thread) length etc.
GW = thread L1 = overall length L2 = thread length SW = HEX size (all measures in mm)
L1 8.5 L1 8.5 L1 9 8
GW
L2 5.5
M 6 x 1.0
SW 7 mm HEX SW
Ref.- No.: Steel 5180142 Ref.- No.: Steel 5180117 Ref.- No.: Steel 5581133 5180125
SST303 SST316L
L1 12
GW
L2 8
M 12 x 1.5
SW 14 mm HEX SW 11 mm HEX SW
Ref.- No.: Steel 5581136 Steel 5180122 Ref.- No.: Steel 5180143
SST303 SST316L
GW
L2 5.5
M 8 x 1.0
9 mm HEX SW 11 mm HEX 11 mm HEX
SST303 SST316L
L1 8.5 L1 8.5
GW
L2 5.5 L2 5.5
r 1/8, 1/8 - 28 bsp Ref.- No.:
SST303 SST316L
GW
L2 5.5 4.5
M 10 x 1.0
SST303 SST316L
GW
1/4-28 unf-2a
7 mm HEX
SST303 SST316L
locking plugs with self-forming Thread for subsequent closing of boreholes standard version made of steel, casehardened according to DIN (650 HV) and yellow passivated with self-forming thread
SFG = self-forming thread (SFT) L1 = overall length L2 = thread length SW = HEX size X = flank angle (all measures in mm)
appLicaTiON aRea By using UMETA locking plugs with self-forming thread (SFT/SFG) you effectively save the thread-cutting process in the borehole. mOuNTiNG iNSTRucTiONS The special thread angle and the specific hardness level allow these plugs to be driven and screwed into boreholes without prior thread cutting. SFG
L1 8.5
Thus, the thread of the plug forms its counterhead. Later, the plug can easily be screwed out and be replaced by a standard locking plug. The exact size of the core hole depends on the material and must be determined by mounting tests. The consistency of the receiving material is decisive. The standard gauge for the installation bore diameter of 0.4-0.5 mm (= 0.02) below nominal width have proved in daily use. SFG
L1 8.5
s6x1
L2 5.5 SW 7 mm HEX
s8x1
L2 5.5 SW 9 mm HEX
81

Grease Nipples From UMETA Catalogue GK84-E 04-2012-2

Uploaded by

Copyright:

Available Formats

Grease Nipples From UMETA Catalogue GK84-E 04-2012-2

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Grease Nipples From UMETA Catalogue GK84-E 04-2012-2

Uploaded by

Copyright:

Available Formats

GREASE NIPPLES

L1 L2 15 5.5 17.5 7.5

L1 L2 17.5 6.5 1121104

L1 L2 15 5.5 18.5 8.5

SW 9mm HEX 9mm HEX

SST303 SST316L 1121415

R 1/8, 1/8 - 28 BSP

Ref.- No.: Steel Brass 1100750

R 1/4, 1/4 - 19 BSP

5/16" - 24 NF/UNF/SAE Ref.- No.:

R 3/8, 3/8 - 19 BSP

Ref.- No.: Steel Brass 1101468 5241072

3/8" - 24 NF/UNF/SAE Ref.- No.:

1/4" - 28 NF/UNF/SAE Ref.- No.:

1/2" - 20 UNF/NF/SAE Ref.- No.:

L1 L2 20.5 5.5 23.5 5.5

WL W SW 11.5 45 11mm HEX

SST303 SST316L 1221111

WL W SW 10.5 45 9mm HEX

L1 20.5 23.5 17.5 20.5

L2 5.5 5.5 5.5 5.5

W SW 45 9mm SQ. 45 9mm HEX 67 9mm SQ. 67 9mm HEX

L1 20.5 23.5 20.5

L2 5.5 5.5 5.5

W SW 45 9mm SQ. 45 9mm HEX 67 9mm HEX

WL W SW 13.5 45 17mm HEX

L2 5.5 5.5 9 5.5 5.5

R 1/8, 1/8 - 28 BSP

WL W SW 10.5 45 9mm HEX

WL W SW 13.5 45 17mm HEX

R 1/4, 1/4 - 19 BSP

R 3/8, 3/8 - 19 BSP

WL W SW 11.5 45 11mm HEX 11.5 67 11mm HEX

WL W SW 11.5 45 11mm HEX

L1 L2 23.5 5.5 20.5 5.5

L1 L2 22.5 6.5 SST303 SST316L 1220944

WL W SW 10.5 45 9mm HEX 12.2 67 9mm HEX

L1 L2 23.5 5.5 20.5 5.5

WL W SW 10.5 45 9mm HEX

L1 L2 23.5 5.5 20.5 5.5

WL W SW 10.5 45 9mm HEX 12.2 67 9mm HEX

L1 L2 23.5 5.5 20.5 5.5

Ref.- No.: Steel Brass 1300901

W SW 90 9mmS Q. 90 9mm HEX

Ref.- No.: Steel Brass 1304503 1300903

Ref.- No.: Steel Brass 1301110

Ref.- No.: Steel Brass 1301111

SST303 SST316L 1321111

Ref.- No.: Steel Brass 1300905

Ref.- No.: Steel Brass 1301412

Ref.- No.: Steel Brass 1300906

Ref.- No.: Steel Brass 1301414

W SW 90 9mmHEX 90 9mm SQ.

Ref.- No.: Steel Brass 1301415

Ref.- No.: Steel Brass 1301417

Ref.- No.: Steel Brass 1301419

R 1/8, 1/8 - 28 BSP

W SW 90 11mmS Q. 90 11mm HEX 90 11mm SQ.

Ref.- No.: Steel Brass 1300951

R 1/4, 1/4 - 19 BSP