Filters: F W, F, and TF Series

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

www.swagelok.

com

Filte rs

F W, F, a nd TF Se r ie s
Remove system particulate contaminants
Gas and liquid service
1/8 to 1/2 in. and 3 to 12 mm end connections
Stainless steel and brass materials

Filters

Features
All-Welded Inline Filters (FW Series)

Body-to-element weld
prevents bypass flow

All-welded construction provides reliable fluid containment.


Inline filters are for use where space is limited.
Filter is easily cleaned by backflushing.
Sintered element is available in 0.5 m nominal pore size;

pleated mesh elements are available in 2, 7, and 15 m


nominal pore sizes.
End connections include Swagelok tube fittings, NPT, and

Pleated element shown;


sintered element available

male VCR face seal fittings.

Inline Filters (F Series)


Inline filters are for use where space is limited.
Replaceable sintered elements are available in 0.5, 2, 7,

15, 60, and 90 m nominal pore sizes; replaceable strainer


elements are available in 40, 140, 230, and 440 m nominal
pore sizes.
End connections include Swagelok tube fittings, NPT, tube

Sintered element shown;


strainer element available

adapter, and male VCR face seal fittings.

Tee-Type Filters (TF Series)


Filter element can be replaced without removing body from

system.
Replaceable sintered elements are available in 0.5, 2, 7,

15, 60, and 90 m nominal pore sizes; replaceable strainer


elements are available in 40, 140, 230, and 440 m nominal
pore sizes.
End connections include Swagelok tube fittings, NPT, and

tube socket or tube butt weld ends.


Select TF series filters are available with ECE R110-type

Sintered element
shown; strainer
element available

approval for use in alternative fuel service. See Options


and Accessories, page 8.
Bypass port available;
see page 8

Filter Elements
FW Series
Sintered

F and TF Series
Pleated Mesh

Strainer

Sintered

Magnified 133
Traps particles as small as

0.5 m in diameter
316L SS construction

Retainer
screen

Pleated
mesh
element

Retainer
screen

Offers larger filtration area


Stainless steel construction

Traps fine particles in a

dense matrix
316 SS construction

Magnified 23
Removes larger particles
316 SS construction

Filters

Pressure-Temperature Ratings
Ratings are based on standard materials of construction. Ratings for TF series
filters with PCTFE gaskets are limited to 200F and 3000 psig (93C and 206 bar).
See page 8.
Filter Series

FW, TF

2F, 4F

Material

6F, 8F

316 SS

Temperature, F (C)

TF
Brass

Working Pressure, psig (bar)

20 (28) to 100 (37)



200 (93)

300 (148)
400 (204)

6000
5160
4660
4280

(413)
(355)
(321)
(294)

3000
2580
2330
2140

(206)
(177)
(160)
(147)

2500
2150
1940
1780

(172)
(148)
(133)
(122)

1000 (68.9)
780 (53.7)
680 (46.8)

2000 (137)
1730 (119)
1470 (101)

500
600
650
700

(260)
(315)
(343)
(371)

3980
3760
3700
3600

(274)
(259)
(254)
(248)

1990
1880
1845
1800

(137)
(129)
(127)
(124)

1660
1560
1540
1500

(114)
(107)
(106)
(103)

750
800
850
900

(398)
(426)
(454)
(482)

3520
3460
3380
3280

(242)
(238)
(232)
(225)

1760
1725
1690
1640

(121)
(118)
(116)
(112)

1460
1440
1410
1360

(100)
(99.2)
(97.1)
(93.7)

Differential Pressure Ratings

Filter
Series
FW

Maximum Differential Pressure


psig (bar)
Sintered Strainer Pleated
Element Element Element
600 (41.3)

F, TF

100 (6.8)

1000 (68.9)

Materials of Construction

Filtration Area

Filter Body Materials


Brass

316 SS

Component

Filter
Series

Bonnet nut

TF

Brass/B16

316 SS/A479

Bonnet

TF

Brass/B16

316 SS/A479

Retainer screens (2)

FW

316 SS

0.5 m size
316L SS
2, 7, and
15 m size
316 SS

Material Grade/ASTM Specification

FW
Element
F, TF

Sintered316 SS
Strainer316 SS with silver solder

Spring

F, TF

302 SS

Gasket

F, TF

Aluminum/B209

Silver-plated
316SS/A240

Brass/B16

316 SS/A479

Body

All

Retaining ring

TF

PH 15-7 Mo SS

Lubricant

Silicone-based

Wetted components listed in italics.


FW series filters not available in brass.

Filter
Series

Sintered
Element
in.2 (mm2)

Strainer
Element
in.2 (mm2)

Pleated
Element
in.2 (mm2)

FW

0.44 (283)

2.25 (1450)

2F

0.55 (350)

4F, 2TF, 4TF

1.3 (830)

1.0 (640)

2.0 (1280)

1.7 (1090)

6F, 8F, 6TF, 8TF

Filters

Flow Data at 70F (20C)


FW Series
End Connections
Inlet/Outlet

Size

Element
Nominal
Pore Size
m

Swagelok tube fittings, 1/4 in.,


male VCR fittings
6 mm

0.5

Inlet Pressure, psig (bar)


5 (0.34)

10 (0.68)

Pressure Drop, psi (bar)

15 (1.0)

Air Flow, std ft3/min (std L/min)


0.04 (1.1)

0.06 (1.7)

0.12 (3.4)

2, 7, 15

Female NPT

1/4 in.

2, 7, 15

Male NPT,
male/female NPT

1/4 in.

2, 7, 15

10 (0.68)

5.6 (150)

10 (280)

14 (390)

0.01 (0.03)

0.04 (0.15)

0.12 (0.45)

1.7 (6.4)

5.5 (20)

8.3 (31)

4.5 (17)

14 (52)

18 (68)

3.5 (13)

11 (41)

14 (52)

F Series
Inlet Pressure, psig (bar)
5 (0.34)

10 (0.68)

15 (1.0)

Air Flow, std ft3/min (std L/min)

Pressure Drop, psi (bar)


10 (0.68)

50 (3.4)

100 (6.8)

Water Flow, U.S. gal/min (L/min)

2F Series
0.5

0.04 (1.1)

2
7

0.06 (1.7)

0.12 (3.4)

0.01 (0.03)

0.04 (0.15)

0.12 (0.45)

0.20 (5.6)

0.40 (11)

0.60 (17)

0.08 (0.30)

0.24 (0.91)

0.40 (1.5)

0.50 (14)

0.90 (25)

1.2 (34)

0.10 (0.37)

0.30 (1.1)

0.48 (1.8)

15

0.80 (22)

1.3

(36)

1.5 (42)

0.12 (0.45)

0.36 (1.3)

0.58 (2.1)

60

1.7 (48)

2.2 (62)

2.4 (68)

0.15 (0.56)

0.50 (1.8)

0.70 (2.6)

90

1.8 (51)

2.2 (62)

2.6 (73)

0.20 (0.75)

0.50 (1.8)

0.60 (2.2)

4F Series
0.5

0.12 (3.4)

0.26 (7.3)

0.48 (13)

0.04 (0.15)

0.17 (0.64)

0.29 (1.0)

0.60 (17)

1.4 (39)

2.3 (65)

0.24 (0.90)

0.86 (3.2)

1.3 (4.9)
2.0 (7.5)

1.4 (39)

2.9 (82)

4.7 (130)

0.40 (1.5)

1.3 (4.9)

15

1.2 (34)

2.9 (82)

4.7 (130)

0.50 (1.8)

1.3 (4.9)

2.1 (7.9)

60

3.1 (87)

5.9 (160)

8.5 (240)

0.90 (3.4)

3.3 (12)

4.6 (17)

90

4.1 (110)

7.5 (210)

10 (280)

1.2 (4.5)

4.2 (15)

6.1 (23)

40, 140, 230, 440 4.7 (130)

8.8 (250)

12 (340)

1.7 (6.4)

5.6 (21)

7.8 (29)

6F and 8F Series
0.5

0.36 (10)

0.86 (24)

1.6 (45)

0.09 (0.34)

0.40 (1.5)

0.76 (2.8)

1.4 (39)

2.8 (79)

4.0 (110)

0.26 (0.98)

1.1 (4.1)

1.6 (6.0)
3.5 (13)

1.8 (51)

4.2 (119)

6.8 (190)

0.64 (2.4)

2.2 (8.3)

15

1.8 (51)

4.9 (130)

7.9 (220)

0.84 (3.1)

2.6 (9.8)

4.1 (15)

60

5.1 (140)

10 (280)

15 (420)

2.0 (7.5)

6.7 (25)

10 (37)

90

6.1 (170)

11 (310)

16 (450)

2.3 (8.7)

7.6 (28)

11 (41)

40, 140, 230, 440 7.2 (200)

14 (390)

20 (560)

4.8 (18)

15 (56)

19 (71)

Outlet is discharged to atmosphere.

100 (6.8)

Outlet is discharged to atmosphere.

Element
Nominal
Pore Size
m

50 (3.4)

Water Flow, U.S. gal/min (L/min)

Filters

Flow Data at 70F (20C)


TF Series
Element
Nominal
Pore Size
m

Inlet Pressure, psig (bar)


5 (0.34)

10 (0.68)

Pressure Drop, psi (bar)

15 (1.0)

10 (0.68)

Air Flow, std ft3/min (std L/min)

50 (3.4)

100 (6.8)

Water Flow, U.S. gal/min (L/min)

2TF Series
0.5

0.04 (1.1)

2
7

0.06 (1.7)

0.12 (3.4)

0.04 (0.15)

0.17 (0.64)

0.29 (1.0)

0.20 (5.6)

0.40 (11)

0.60 (17)

0.08 (0.30)

0.24 (0.91)

0.40 (1.5)

0.50 (14)

0.90 (25)

1.2 (34)

0.10 (0.37)

0.30 (1.1)

0.48 (1.8)

15

0.80 (22)

1.3

(36)

1.5 (42)

0.12 (0.45)

0.36 (1.3)

0.58 (2.1)

60

1.7 (48)

2.2 (62)

2.4 (68)

0.15 (0.56)

0.50 (1.8)

0.70 (2.6)

90

1.8 (51)

2.2 (62)

2.6 (73)

0.20 (0.75)

0.50 (1.8)

0.60 (2.2)

40, 140, 230, 440 1.8 (51)

2.3 (65)

2.6 (73)

0.20 (0.75)

0.50 (1.8)

0.60 (2.2)

0.04 (0.15)

0.17 (0.64)

0.29 (1.0)

4TF Series
0.5

0.12 (3.4)

0.26 (7.3)

0.48 (13)

0.60 (17)

1.4 (39)

2.3 (65)

0.24 (0.90)

0.86 (3.2)

1.3 (4.9)

1.4 (39)

2.9 (82)

4.7 (130)

0.40 (1.5)

1.3 (4.9)

2.0 (7.5)

15

1.2 (34)

2.9 (82)

4.7 (130)

0.50 (1.8)

1.3 (4.9)

2.1 (7.9)

60

3.1 (87)

5.9 (160)

8.5 (240)

0.80 (3.0)

2.7 (10)

3.9 (14)

90

4.1 (110)

7.5 (210)

10 (280)

1.1 (4.1)

3.4 (12)

4.9 (18)

40, 140, 230, 440 4.7 (130)

8.8 (250)

12 (340)

1.2 (4.5)

4.2 (15)

5.6 (21)

1.6 (45)

0.09 (0.34)

0.40 (1.5)

0.76 (2.8)

6TF and 8TF Series


0.5

0.36 (10)

0.86 (24)

1.4 (39)

2.8 (79)

4.0 (110)

0.26 (0.98)

1.1 (4.1)

1.6 (6.0)

1.8 (51)

4.2 (119)

6.8 (190)

0.64 (2.4)

2.2 (8.3)

3.5 (13)

15

1.8 (51)

4.9 (130)

7.9 (220)

0.84 (3.1)

2.6 (9.8)

4.1 (15)

60

5.1 (140)

10 (280)

15 (420)

1.5 (5.6)

4.8 (18)

6.7 (25)

90

6.1 (170)

11 (310)

16 (450)

1.7 (6.4)

5.5 (20)

7.6 (28)

40, 140, 230, 440 7.2 (200)

14 (390)

20 (560)

2.4 (9.0)

7.2 (27)

10 (37)

Outlet is discharged to atmosphere.

Testing

Cleaning and Packaging

Every Swagelok filter is factory tested with nitrogen at


1000psig (69 bar) to a requirement of no detectable leakage
with a liquid leak detector.

Swagelok filters with VCR end connections are processed in


accordance with Swagelok Special Cleaning and Packaging
(SC-11), MS0663, to ensure compliance with product
cleanliness requirements stated in ASTMG93 Level C.
Swagelok filters with other end connections are processed in
accordance with Swagelok Standard Cleaning and Packaging
(SC-10), MS0662; special cleaning and packaging are
available as an option.

Filters

Ordering Information and Dimensions


Dimensions are for reference only and are subject to change.

FW Series

1 in. (25.4 mm) flat

Add an element designator to the basic


ordering number.

F Series and TF Series


Stainless Steel Filters
Add an element designator to the basic
ordering number.

Example: SS-4FWS-05

Example: SS-2F-2

Brass Filters
Replace SS with B in the ordering
number.

FW Series

Example: B-2F-2

Size

Element
Nominal
Pore Size
m

1/4 in.

0.5

Swagelok
tube fittings

1/4 in.

2, 7, 15

6 mm

0.5

6 mm

2, 7, 15

Female NPT

1/4 in.

Male NPT

1/4 in.

Male/
female NPT

1/4 in.

End Connections
Inlet/Outlet

Male VCR
fittings

Basic
Ordering
Number

0.5

1/4 in.

2, 7, 15

Orifice

SS-4FWSSS-4FWSS-6FWS-MM-

A
2.09 (53.1)

0.187 (4.75)

SS-6FW-MM-

2, 7, 15

1/4 in.

Dimensions, in. (mm)

2.15 (54.6)
2.13 (54.1)
2.15 (54.6)

SS-4FW4-

0.453 (11.5)

1.57 (39.9)

SS-4FW2-

0.281 (7.14)

1.89 (48.0)

SS-4FW5-

0.281 (7.14)

1.72 (43.7)

SS-4FWS-VCRSS-4FW-VCR-

Dimensions shown with Swagelok tube fitting nuts finger-tight.

0.187 (4.75)

Filters with VCR fitting end connections


are not available in brass.

F and TF Series Elements


Elements remove 95 % of particles
larger than the nominal pore size.
Nominal Pore Size
Pore Size Range Element Element
m
m
Type Designator
0.5

0.5 to 2

1 to 4

2.00 (50.8)

5 to 10

2.04 (51.8)

15

11 to 25

40

60

50 to 75

90

75 to 100

FW Series Elements

140

Elements remove 95 % of particles


larger than the nominal pore size.

230

440

Nominal Pore Size


Pore Size Range Element Element
m
m
Type Designator
0.5

0.5 to 2

15

Sintered

05
2

Pleated

7
15

05
Sintered

2
7
15

Strainer
Sintered

40
60
90
140

Strainer

Not available for 2F series.

230
440

Filters

Ordering Information and Dimensions


F Series
End Connections
Inlet/Outlet

Swagelok
tube fittings

Size

Basic
Ordering
Number

Filter
Series

B flat

Dimensions, in. (mm)


Orifice

1/8 in.

SS-2F-

2F

0.094 (2.39)

2.35 (59.7)

9/16 (14.3)

1/4 in.

SS-4F-

4F

0.187 (4.75)

2.95 (74.9)

3/4 (19.0)

3/8 in.

SS-6F-

6F

0.281 (7.14)

3.21 (81.5)

1/2 in.

SS-8F-

8F

0.406 (10.3)

3.49 (88.6)

3 mm

SS-3F-MM-

2F

0.094 (2.39)

2.38 (60.5)

9/16 (14.3)

6 mm

SS-6F-MM-

4F

0.187 (4.75)

2.96 (75.2)

3/4 (19.0)

0.094 (2.39)

2.16 (54.9)

9/16 (14.3)

1 (25.4)

1/8 in.

SS-2F4-

2F

1/4 in.

SS-4F4-

4F

Male NPT

1/4 in.

SS-4F2-

4F

Male VCR
fittings

1/4 in.

SS-4F-VCR-

4F

1/8 in.

SS-2F-T7-

2F

0.094 (2.39)

2.29 (58.2)

9/16 (14.3)

1/4 in.

SS-4F-T7-

4F

0.187 (4.75)

2.91 (73.9)

3/4 (19.0)

Female NPT

Swagelok
tube fitting/
tube adapter

2.87 (72.9)
0.187 (4.75)

2.69 (68.3)

3/4 (19.0)

2.82 (71.6)

Dimensions shown with Swagelok tube fitting nuts finger-tight.

TF Series
A
B

3/8 in. butt


weld dia

2 mounting holes,
M5 3 0.8-6H threads,
0.25 (6.4) deep

1/4 in. socket


weld dia

D
E
F flat

Bolt circle:
1.00 (25.4) for
2TF, 4TF;
1.13 (28.7) for
6TF, 8TF

Tube socket and tube butt


weld end connections

End Connections
Type

Swagelok
tube fitting

Female NPT

Male NPT
Tube socket
weld and tube
butt weld

Size

Basic
Ordering
Number

Dimensions, in. (mm)

Filter
Series

Orifice

1.00 (25.4)

0.38 (9.7)

1.87 (47.5)

1 (25.4)

1.13 (28.7)

0.46 (11.7)

2.20 (55.9)

1 1/8 (28.6)

1.00 (25.4)

0.38 (9.7)

1.87 (47.5)

1 (25.4)

1.13 (28.7)

0.46 (11.7)

2.20 (55.9)

1 1/8 (28.6)

1.00 (25.4)

1.00 (25.4)

0.38 (9.7)

1.87 (47.5)

1 (25.4)

1.00 (25.4)

1.00 (25.4)

0.38 (9.7)

1.87 (47.5)

1 (25.4)

1.25 (31.8)

1.13 (28.7)

0.46 (11.7)

2.20 (55.9)

1 1/8 (28.6)

1.00 (25.4)

1.00 (25.4)

0.38 (9.7)

1.87 (47.5)

1 (25.4)

1/8 in.

SS-2TF-

2TF

0.094 (2.39)

2.27 (57.7)

1.07 (27.2)

1/4 in.

SS-4TF-

4TF

0.174 (4.41)

2.47 (62.7)

1.06 (26.9)

3/8 in.

SS-6TF-

6TF

0.213 (5.41)

2.84 (72.1)

1.32 (33.5)

1/2 in.

SS-8TF-

8TF

0.250 (6.35)

3.04 (77.2)

1.31 (33.3)

6 mm

SS-6TF-MM-

4TF

0.172 (4.36)

2.46 (62.5)

1.06 (26.9)

0.213 (5.41)

2.84 (72.1)

1.38 (35.1)

2.86 (72.6)

1.32 (33.5)

3.04 (77.2)

1.31 (33.3)

8 mm

SS-8TF-MM-

6TF

10 mm

SS-10TF-MM-

8TF

12 mm

SS-12TF-MM-

8TF

1/8 in.

SS-2TF4-

2TF

1/4 in.

SS-4TF4-

4TF

1/4 in.

SS-4TF2-

4TF

3/8 in.

SS-6TF2-

6TF

1/2 in.

SS-8TF2-

8TF

SS-4TF-TW-

4TF

1/4 and
3/8 in.

Top

0.250 (6.35)
0.174 (4.41)
0.174 (4.41)
0.250 (6.35)
0.174 (4.41)

Dimensions shown with Swagelok nuts finger-tight.


Mounting holes not available with 1/4 in. female NPT end connections.

2.00 (50.8)
2.13 (54.1)
2.13 (54.1)
2.38 (60.5)
2.75 (69.9)
1.68 (42.7)

Options and Accessories


All Filters

F Series

Special Cleaning and Packaging (SC-11)

Special Alloys

Swagelok filters with VCR end connections are processed in


accordance with Swagelok Special Cleaning and Packaging
(SC-11), MS0663, to ensure compliance with product
cleanliness requirements stated in ASTMG93 Level C.

Filters of alloy C-276 are available in some sizes. Contact your


authorized Swagelok sales and service representative for
more information.

To order special cleaning and packaging for filters with other


end connections, add -SC11 to the valve ordering number.

TF Series

Example: SS-4FWS-05-SC11

The bypass
port at the
filter bottom
enables
sampling or
purging. To
order, insert
a designator
into the filter
ordering
number.

F and TF Series
Element Kits

Filter
Series

Kits include element


and instructions.
Select a basic kit
ordering number
and add an element
designator.
Example:
SS-2F-K4-05

Basic Kit
Ordering Number

2F

SS-2F-K4-

4F, 2TF, 4TF

SS-4F-K4-

6F, 8F, 6TF, 8TF

SS-8F-K4-

See Dimensions tables, page 7, for filter series


information.

Nominal Pore Size


Pore Size Range Element Element
m
m
Type Designator
0.5
2

0.5 to 2
1 to 4

5 to 10

15

11 to 25

40
90

75 to 100

140

230

440

Kits include gasket and


instructions. To order a
stainless steel gasket kit,
select a kit ordering number.
For other gasket materials,
replace SS with A for
aluminum or KF for PCTFE
(TF series only).
Example: A-2F-K3

6TF,
8TF

Sintered

Filters Without Elements

40
60

TF series filters can be ordered without elements. Add LE to


the basic ordering number.

90

Example: SS-2TF-LE

140
Strainer

230
440

Filter
Series

Bypass Port
Overall
End
Height
Connection
Designator in. (mm)
1/8 in. Swagelok
2.36
-F1
tube fitting
(59.9)
1/8 in. female
2.09
-F2
NPT
(53.1)
1/4 in. Swagelok
2.82
-F3
tube fitting
(71.6)
1/4 in. tube
2.21
-F8
socket weld
(56.1)
1/8 in. female
2.46
-F4
(62.5)
NPT
1/4 in. Swagelok
3.14
-F5
tube fitting
(79.8)
3/8 in. Swagelok
3.20
-F6
tube fitting
(81.3)
1/2 in. Swagelok
3.42
-F7
tube fitting
(86.9)

15

Not available for 2F series.

Gasket Kits

2TF,
4TF

Sintered

Strainer

50 to 75

Example:
SS-2TF-F1-05

Filter
Series

05

60

Bypass Port

Kit Ordering
Number

2F

SS-2F-K3

4F

SS-4F-K3

6F, 8F

SS-8F-K3

2TF, 4TF

SS-4TF-K2

6TF, 8TF

SS-8TF-K2

See Dimensions tables, page7,


for filter series information.

Safe Product Selection


When selecting a product, the total system design must
be considered to ensure safe, trouble-free performance.
Function, material compatibility, adequate ratings,
proper installation, operation, and maintenance are the
responsibilities of the system designer and user.
Caution: Do not mix or interchange parts with those of
other manufacturers.

Filters With ECE R110-Type Approval


Stainless steel TF series filters with stainless steel sintered
or strainer elements are available tested with ECE R110-type
approval for use in alternative fuel service.
Temperature rating: 40 to 248F (40 to 120C)
Pressure rating within the range: 3770 psig (260 bar)

To order, add -12463 to a standard TF series filter ordering


number.
Example: SS-2TF-05-12463

Oxygen Service Hazards


For more information about hazards and risks of oxygenenriched systems, see the Swagelok Oxygen System Safety
technical report, MS0613.

Warranty Information
Swagelok products are backed by The Swagelok Limited
Lifetime Warranty. For a copy, visit swagelok.com or contact
your authorized Swagelok representative.

Swagelok, VCRTM Swagelok Company


PH 15-7 MoTM AK Steel Corp.
19982010 Swagelok Company
Printed in U.S.A., AGS
April 2010, R9
MS-01-92

You might also like