Scribd Logo
Upload

Welcome to Scribd!

  • 91 views

    Iptables Configuration Script, An Example

    Uploaded by

    abhineet sharma
    This document provides a sample shell script for creating a firewall configuration from scratch without using /etc/sysconfig/iptables. The script sets various sysctl settings, loads iptables modules, defines variables, drops all incoming traffic by default, blocks known bad IPs from a file, and allows certain common ports and protocols while logging and dropping everything else.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Iptables Configuration Script, An Example

    Uploaded by

    abhineet sharma
    91 views3 pages
    This document provides a sample shell script for creating a firewall configuration from scratch without using /etc/sysconfig/iptables. The script sets various sysctl settings, loads iptables modules, defines variables, drops all incoming traffic by default, blocks known bad IPs from a file, and allows certain common ports and protocols while logging and dropping everything else.

    Original Description:

    Found this script and it is good too!

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a sample shell script for creating a firewall configuration from scratch without using /etc/sysconfig/iptables. The script sets various sysctl settings, loads iptables modules, defines variables, drops all incoming traffic by default, blocks known bad IPs from a file, and allows certain common ports and protocols while logging and dropping everything else.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    91 views3 pages

    Iptables Configuration Script, An Example

    Uploaded by

    abhineet sharma
    This document provides a sample shell script for creating a firewall configuration from scratch without using /etc/sysconfig/iptables. The script sets various sysctl settings, loads iptables modules, defines variables, drops all incoming traffic by default, blocks known bad IPs from a file, and allows certain common ports and protocols while logging and dropping everything else.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    You can skip /etc/sysconfig/iptables file and create a shell script from scratch as follows:

    #!/bin/bash # A sample firewall shell script IPT="/sbin/iptables" SPAMLIST="blockedip" SPAMDROPMSG="BLOCKED IP DROP" SYSCTL="/sbin/sysctl" BLOCKEDIPS="/root/scripts/blocked.ips.txt" # Stop certain attacks echo "Setting sysctl IPv4 settings..." $SYSCTL net.ipv4.ip_forward=0 $SYSCTL net.ipv4.conf.all.send_redirects=0 $SYSCTL net.ipv4.conf.default.send_redirects=0 $SYSCTL net.ipv4.conf.all.accept_source_route=0 $SYSCTL net.ipv4.conf.all.accept_redirects=0 $SYSCTL net.ipv4.conf.all.secure_redirects=0 $SYSCTL net.ipv4.conf.all.log_martians=1 $SYSCTL net.ipv4.conf.default.accept_source_route=0 $SYSCTL net.ipv4.conf.default.accept_redirects=0 $SYSCTL net.ipv4.conf.default.secure_redirects=0 $SYSCTL net.ipv4.icmp_echo_ignore_broadcasts=1 #$SYSCTL net.ipv4.icmp_ignore_bogus_error_messages=1 $SYSCTL net.ipv4.tcp_syncookies=1 $SYSCTL net.ipv4.conf.all.rp_filter=1 $SYSCTL net.ipv4.conf.default.rp_filter=1 $SYSCTL kernel.exec-shield=1 $SYSCTL kernel.randomize_va_space=1 echo $IPT $IPT $IPT $IPT $IPT $IPT "Starting IPv4 Firewall..." -F -X -t nat -F -t nat -X -t mangle -F -t mangle -X

    # load modules modprobe ip_conntrack [ -f "$BLOCKEDIPS" ] && BADIPS=$(egrep -v -E "^#|^$" "${BLOCKEDIPS}") # interface connected to the Internet PUB_IF="eth0" #Unlimited traffic for loopback $IPT -A INPUT -i lo -j ACCEPT $IPT -A OUTPUT -o lo -j ACCEPT # DROP all incomming traffic $IPT -P INPUT DROP $IPT -P OUTPUT DROP $IPT -P FORWARD DROP if [ -f "${BLOCKEDIPS}" ]; then # create a new iptables list $IPT -N $SPAMLIST for ipblock in $BADIPS do

    $IPT -A $SPAMLIST -s $ipblock -j LOG --log-prefix "$SPAMDROPMSG " $IPT -A $SPAMLIST -s $ipblock -j DROP done $IPT -I INPUT -j $SPAMLIST $IPT -I OUTPUT -j $SPAMLIST $IPT -I FORWARD -j $SPAMLIST fi # Block sync $IPT -A INPUT -i ${PUB_IF} -p tcp ! --syn -m state --state NEW -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Drop Sync" $IPT -A INPUT -i ${PUB_IF} -p tcp ! --syn -m state --state NEW -j DROP # Block Fragments $IPT -A INPUT -i ${PUB_IF} -f -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Fragments Packets" $IPT -A INPUT -i ${PUB_IF} -f -j DROP # Block bad stuff $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL FIN,URG,PSH -j DROP $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL ALL -j DROP $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL NONE -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "NULL Packets" $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL NONE -j DROP # NULL packets $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,RST SYN,RST -j DROP

    $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,FIN SYN,FIN -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "XMAS Packets" $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP #XMAS $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags FIN,ACK FIN -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Fin Packets Scan" $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags FIN,ACK FIN -j DROP # FIN packet scans $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j DROP

    # Allow full outgoing connection but no incomming stuff $IPT -A INPUT -i ${PUB_IF} -m state --state ESTABLISHED,RELATED -j ACCEPT $IPT -A OUTPUT -o ${PUB_IF} -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT # Allow ssh $IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 22 -j ACCEPT # Allow http / https (open port 80 / 443) $IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 80 -j ACCEPT #$IPT -A INPUT -o ${PUB_IF} -p tcp --destination-port 443 -j ACCEPT # allow incomming ICMP ping pong stuff $IPT -A INPUT -i ${PUB_IF} -p icmp --icmp-type 8 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT #$IPT -A OUTPUT -o ${PUB_IF} -p icmp --icmp-type 0 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow port 53 tcp/udp (DNS Server) $IPT -A INPUT -i ${PUB_IF} -p udp --dport 53 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT #$IPT -A OUTPUT -o ${PUB_IF} -p udp --sport 53 -m state --state ESTABLISHED,RELATED -j ACCEPT

    $IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 53 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT #$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 53 -m state --state ESTABLISHED,RELATED -j ACCEPT # Open port 110 (pop3) / 143 $IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 110 -j ACCEPT $IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 143 -j ACCEPT ##### Add your rules below ###### # # ##### END your rules ############ # Do not log smb/windows sharing packets - too much logging $IPT -A INPUT -p tcp -i ${PUB_IF} --dport 137:139 -j REJECT $IPT -A INPUT -p udp -i ${PUB_IF} --dport 137:139 -j REJECT # log everything else and drop $IPT -A INPUT -j LOG $IPT -A FORWARD -j LOG $IPT -A INPUT -j DROP exit 0

    You might also like