[ Core Center ] : MSI hardware monitor & overclock & fan control Tool

Support list :
MS-6570E,MS-6580(v5.0),MS-6585(v5.0),MS-6590(v2.0),
MS-6702(v1.0,v2.0),MS-6702E,MS-6714(v5.0),MS-6728(v1.0,v2.0,v3.0),MS-674
1,MS-6758(v1.0,v2.0),MS-6788(v1.0,v2.0),MS-6799,
MS-7003,MS-7008,MS-7021,MS-7025,MS-7028(v1.0,v2.0),MS-7030,MS-7031,MS-70
32,MS-7033,MS-7037,MS-7043,MS-7047,MS-7052,MS-7053,MS-7058,MS-7066,MS-7088,
MS-7100,MS-7125(v1.0,v3.0,v3.A),MS-7133,MS-7135,MS-7143(v2X),MS-7151,MS-
7157,MS-7158,MS-7160,MS-7166,MS-7175,MS-7176(v1.0,v2.0),MS-7185,MS-7194
MS-7203,MS-7220,MS-7226,MS-7235(v1.1),MS-7236(v1.0,v2.1,v2.2,v2.4),MS-72
46,MS-7250(v1.0,v2.0),MS-7260,MS-7267(v2.1,v3.0,v3.1,v3.2),MS-7279(v1.0,v2.3),MS
-7280

OS : Windows 98/Me/2000/XP32/XP64
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.2.4 Build Date: 2007.07.04
a. fix other models get DMI data error after support MS-7235 w/
v1.70 BIOS
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.2.3 Build Date: 2007.04.04
a. fix not support MS-7235 v1.1 w/ BIOS v160,v170
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.2.2 Build Date: 2006.12.19
a. fix ICS954519BGLF(MS-7236) writing registers when overclock
b. correct MS-7279 v2.3 Conroe CPU ratio
c. remove "HaveEIST" parameter
d. modify ICH7,ICH8 SMBus_Port reading for 64bit XP
e. modify MS-7279 v2.3 MS7 WD
f. fix reading K8 CPU Ratio failed to cause system restart
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.2.1 Build Date: 2006.11.07
a. modify ICH7 SMBus address reading under XP64
b. add "HaveEIST" parameter to check BIOS has implemented "EIST"
item
c. modify LoadNTRushTop() to load 32/64 drivers to replace Insta
llShield method
d. support MS-7236 v2.3(BIOS v332) + Conroe FSB266 CPU
e. new mainboard :
MS-7267 v3.1,v3.2 (Chipset: Intel 945GM4+ICH7, ClockGen:
ICS 954129BGLF,Linear over clock,watch-dog(MS7))
MS-7236 v2.4 (Chipset: Intel 945PL+ICH7, ClockGen: ICS 9
54519BGLF,Linear over clock,watch-dog(MS7))
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.2.0 Build Date: 2006.10.05
a. fix MS-7125 v3.A DMI detection from 3.0A to 3.A (BIOS v7.1)
b. support Intel Conroe CPU serial
- E6300 (FSB266,EIST,CPUID=0x6F6h)
- E6700 (FSB266,EIST,CPUID=0x6F5h)
c. fix Intel Conroe CPU Ratio error issue under EIST mode
d. support Intel EIST for MS-7235 v1.1 (W7235IMS.169)
e. check EIST register by cmos
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.1.9 Build Date: 2006.09.20
a. avoid MS-7236 v2.2 overclock failed issue
b. fix MS-7236 v2.2 read SMBus failed under 64bit XP
--------------------------------------------------------------------------------
--------------------
version 1.0.0.1 (03/27/03)
new release
smartly load saved or auto_overclock frequency & voltage
s
startup folder & unstall PC Alert4
new mainboard :
MS-6728 (ClockGen :ICS 952611BF,Linear over clock , watc
h-dog , SouthBridge:INTEL 82801ER,NorthBridge:INTEL 865)
MS-6758 (ClockGen :ICS 952611BF,Linear over clock , watc
h-dog , SouthBridge:INTEL 82801ER,NorthBridge:INTEL 875)
version 1.0.0.2 (04/17/03)
add version information
relocate two wings' position
fix MS-6758 magazine version bug(memory voltage 2.8v,FSB
200 MHz)
avoid "ini not found" bug
fix MS-6728 magazine version bug(memory voltage 2.8v,FSB
200 MHz,Vcore 1.55v,close turbo pin)
version 1.0.5.2 (05/30/03)
add version dialog
add setting of interval time & sound warning
add historical diagram of CPU & system & NB temperatures
new mainboard :
MS-6585 v5.0 (ClockGen :ICS 952011BF,Linear over clock ,
watch-dog , SouthBridge: Sis963L,NorthBridge:Sis648FX)
version 1.5.3.0 (06/09/03)
fix auto mode conflict with OM CD setup
fix bitmap bug when taskbar at top
fix clockgen value (FSB=200 MHz) & remove system fan
new mainboard :
MS-6788 (ClockGen :ICS 952619CF,Linear over clock , watc
h-dog , SouthBridge: Intel 82801EB,NorthBridge:Intel 865)
MS-6590 v2.0(ClockGen :ICS 93738AF,Linear over clock , w
atch-dog , SouthBridge: Via VT8237,NorthBridge:Via KT600)
MS-6799 (ClockGen :ICS 950909AF,Linear over clock , watc
h-dog , SouthBridge: Via VT8237,NorthBridge:Via PT800)
version 1.5.4.0 (07/16/03)
add OC menu for MS-6788
update MS-6788 Vcore adjustment
fix user fan control save bug
new mainboard :
MS-6702 (ClockGen :ICS 950403CF,Linear over clock , watc
h-dog , SouthBridge: Via VT8237,NorthBridge:Via KT800)
version 1.5.5.0 (08/08/03)
add CoolnQuiet for MS-6702
fix smbus base address for MS-6799 (0x500,Award bios)
 fix voltage adjustment for MS-6758
version 1.5.6.0 (29/08/03)
support MS-6702 magazine version
version 1.5.6.1 (08/09/03)
support MS-7003 (ClockGen :ICS 951402AG,watch-dog,Linear
over clock,SouthBridge:ATI IXP150,NorthBridge:ATI RS300)
version 1.5.7.0 (09/09/03)
support Cool'N'Quiet for MS-6702
fix MS-6799 new clockgen ICS 950917
new mainboard :
MS-6728 v2.0 (ClockGen :ICS 952611BF,Linear over clock ,
watch-dog , SouthBridge: Intel 82801EB,NorthBridge:INTEL 865)
MS-7008 (ClockGen :ICS 952911AF,Linear over clock , watc
h-dog , SouthBridge: Via VT8237,NorthBridge:Via PT800)
version 1.5.7.1 (10/03/03)
Add IGP/AGP bitmap for MS-7003
version 1.5.8.0 (10/01/03)
add fan control for MS-6728 v2.0c
new mainboard :
MS-7021 (ClockGen :ICS 950916BF,Linear over clock , watc
h-dog , SouthBridge: Via VT8237,NorthBridge:Via KT600)
MS-6580 v5.0 (ClockGen :ICS 952611BF,Linear over clock ,
watch-dog , SouthBridge: Intel 82801EB,NorthBridge:INTEL 845PE)
version 1.5.9.0 (10/14/03)
auto overclock interval 6 sec
add OC menu for MS-7008
fix fan control for MS-6702
remove OC menu for MS-6580 v5.0
version 1.6.0.0 (11/12/03)
fix OC menu default function
update M,N value for FSB above 200 MHz
increase fan control level if fan rpm=0 for auto mode
fix FSB200 issue
fix Prescott CPU Vcore
add version information for Live Update
version 1.6.1.0 (12/26/03)
merge MS-7003
new mainboard :
MS-6758 v2.0 (ClockGen :ICS 952611BF,Linear over clock ,
watch-dog , SouthBridge: Intel 82801EB,NorthBridge:INTEL 875)
version 1.6.2.0 (1/28/04)
fix Japanese OS bitmap offset (width becomes larger)
fix Cool&Quiet clock
fix fan control while CPU cool down
fix Prescott CPU Vcore "auto" unselectable
new mainboard :
MS-6788 v2.0 (ClockGen :ICS 952611BF,Linear over clock ,
watch-dog , SouthBridge: Intel 82801EB,NorthBridge:INTEL 865)
MS-7043 (ClockGen :ICS 952911BF,Linear over clock , watc
h-dog , SouthBridge: Via 8237,NorthBridge:Via PT880)
 version 1.6.4.0 (2/26/04)
fix reboot due to vcore adjustment for MS-6590 v2.0
new mainboard :
MS-7030 (Linear over clock , NForce3 250Gb(CK8S))
version 1.6.5.0 (3/16/04)
fix NB fan speed for MS-6728
change system fan pic for MS-7047
reduce cpu fan control range for MS-6570E & MS-6590 v2.0
& MS-7021
new mainboard :
MS-6570E (Linear over clock , NForce2 MCP)
MS-7025 (Linear over clock , NForce3 250Gb(CK8S))
MS-7047 (ClockGen :ICS 952930EF,Linear over clock , watc
h-dog , SouthBridge: Via 8237,NorthBridge:Via KT880)
MS-6741 (ClockGen :ICS 950403CF,Linear over clock , watc
h-dog , SouthBridge: Via 8237,NorthBridge:Via KT880)
MS-7032 (ClockGen :ICS 950410AF,Linear over clock , watc
h-dog , SouthBridge: Via 8237,NorthBridge:Via KT880)
MS-6702E (ClockGen :ICS 950410AF,Linear over clock , wat
ch-dog , SouthBridge: Via 8237,NorthBridge:Via KT880)
MS-7058 (ClockGen :ICS 954129BF,Linear over clock , watc
h-dog , SouthBridge: Intel 82801FB,NorthBridge:Intel 915G)
version 1.6.6.0 (5/21/04)
no fan warning while abnormal speed detected (CPUFanStop
,NBFanStop)
fix fan speed control (reach full speed)
Enable fan control function for MS-7058
new mainboard :
MS-7028 (ClockGen :ICS 954130AF,Linear over clock , watc
h-dog , SouthBridge: Intel 82801FB,NorthBridge:Intel 915G)
MS-7052 (ClockGen :ICS 954129BF,Linear over clock , watc
h-dog , SouthBridge: Intel 82801FB,NorthBridge:Intel 915G)
MS-7031 (ClockGen :ICS 951402AG,Linear over clock , watc
h-dog , SouthBridge: ATI IXP300,NorthBridge:ATI RS350)
MS-7058 (ClockGen :ICS 954139AF/ICS 954129BF,Linear over
clock , watch-dog , SouthBridge: Intel 82801FB,NorthBridge:Intel 915G)
version 1.6.7.0 (6/04/04)
add "bios smart fan control" detecting function.
change CPU_SYS_Fan Picture for MS-6702E
change "AGP Voltage" picture to "NB Voltage" for MS-7058,MS-7052
add "smart fan detecting" for MS-7058
fix Vcore function error for MS-7058,MS-7052
fix cpu and sys fan speed and fan control error for MS-6702E
new mainboard :
MS-6714 Ver5.0 (ClockGen :Cypress CY28349,Linear over cl
ock , SouthBridge: Intel 82801DB,NorthBridge:Intel 845GE)
version 1.6.8.0 (6/16/04)
new mainboard :
MS-7053 (ClockGen :ICS 954130BF,Linear over clock , watc
h-dog , SouthBridge: Intel 82801FB,NorthBridge:Intel 925X)
version 1.6.9.0 (6/25/04)
add +12v for MS-7053
fix cpu temperature for MS-7021
fix system temp to sensor 3 for MS-7030
fix overclocking for MS-7028
 MS-6728 Ver1.0 do not show nor bridge temp
new mainboard :
Support MS-6702 v2.0 (ClockGen :ICS 950410AF,Linear over
clock , watch-dog , SouthBridge: Via VT8237,NorthBridge:Via K8T800pro)
change NB Temp & SYS Temp for MS-7030
version 1.7.0.0 (8/03/04)
fix over clock error for MS-7028 (533 MHz CPU)
new mainboard :
MS-6728 Ver3.0 (ClockGen :ICS 952642AF,Linear over clock
, watch-dog , SouthBridge: Intel 82801ER,NorthBridge:Intel 865)
fix watchdog timer error for MS-7028 (CPU:(default FSB: 200 MHz)
)
fix CPU fan speed alarm error.
change "AGP Voltage" picture to "NB Voltage" for MS-7028
fix vcore setting value error for MS-7028
fix FSB value error after second boot for MS-7028
adjust "AGP Voltage" and "Memory Voltage" value order
fix "Memory Voltage" value order, adjust "NB Voltage" upper limi
t and change "Memory Voltage" picture to "DDR Voltage" for MS-7028
new mainboard :
MS-7033 (ClockGen :ICS 954119DF,Linear over clock , watc
h-dog , SouthBridge: Intel 82801FB,NorthBridge:Intel 915G)
support CPU fan control for MS-7033
enable ATI ISA enable bit after S3/S4
fix vcore & memory voltage adjustment for MS-7025 (MS6)
version 1.7.1.0 (9/16/04)
change V33 register mapping for MS-6728 v2(22->21)
fix Vcore warnning error for MS-6702
exchange CPU and NB fan speed mapping register addr for MS-6728
v3.0
adjust DDR and AGP voltage adjustable range for MS-6728 v3.0
add vcore voltage adjustment for MS-6728 v3.0
disable fan control function for MS-6728 v3.0 (HW no reserve)
use MS8 watchdog timer instead of colock gen watchdog timer for
MS-6728 v3.0
fix DDR voltage error(2.8v -> 2.6v) for MS-6758 v1.0
version 1.7.2.0 (11/04/04)
add "eveshamvale" for MS-7030 dmi type2 product name string
add V33 for MS-6702E
fix system temp to sensor 3 for MS-7025
new mainboard :
MS-7125 (Linear over clock , NForce4(CK804))
MS-7100 (Linear over clock , NForce4(CK804))
fix CoolnQuiet picture error for MS-6741
fix corecenter cpu & system fan error for MS-7125
new mainboard :
MS-7066 (ClockGen:CY28416 , SouthBridge: Intel 82801FB,N
orthBridge:Intel 915G)
MS-7088 (ClockGen:ICS952642AF , SouthBridge: Intel 82801
EB,NorthBridge:Intel 865G)
MS-7133 (ClockGen:ICS954119DF , SouthBridge: Intel 82801
FB,NorthBridge:Intel 915)
MS-7135 (ClockGen:CK8-04 , nVidia CK8-04)
--------------------------------------------------------------------------------
--------------------
Author: Bryan Lin
New Version: 1.7.3.0 Build Date: 2004.12.08
Release on CD-73
a. set INFO.DAT to be non-read-only to fix value can't be saved
issue
 b. fix CK8-04 chipset FSB operator
c. fix CK8-04 Fan Control register position (modify CPU/NB Fan f
rom 03h/01h to be 01h/03h)
d. modify CPU/NB Fan upper limit to be 9000rpm (MS-7125 NB Fan i
s over 7000rpm)
--------------------------------------------------------------------------------
--------------------
Author: Bryan Lin
New Version: 1.7.4.0 Build Date: 2005.01.10
Release on CD-74
a. remove NB Icons if no NB Temperatrue (modify main and right-w
ing skin)
b. fix issue that can't detect Hardware Monitor of ATI board (AT
IEnableISA in NTGLM7X.SYS) (MS-7003,MS-7031)
--------------------------------------------------------------------------------
--------------------
New Version: 1.7.5.0 Build Date: 2005.02.25
Release on CD-75
a. OverClock again after resuming from suspend mode
--------------------------------------------------------------------------------
--------------------
New Version: 1.7.6.0 Build Date: 2005.04.09
Release on new OMCD (IPOM,VPOM,SPOM)
a. Fan Control(user mode) again after resuming from suspend mode
b. Fix MS-6702 overclock again failed issue after resuming from
suspend mode
c. Support AMD Semprom 2600+/2800+ K8 CPU
d. new mainboard :
MS-7166 (ClockGen:RTM862-480 , SouthBridge: Intel 82801F
B,NorthBridge:Intel 915P)
MS-7160 (ClockGen:nVidia C19, nVidia C19+MCP4, Linear ov
er clock)
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.0.1 Build Date: 2005.04.21
Release on new OMCD (IPOM,VPOM,SPOM)
a. fix MS-7160 system hang issue after suspend
b. fix MS-7160 CPU FSB are wrong issue
c. fix MS-7160 System Temperature to read Sensor1 (not Sensor3)
d. change AP version be 2.0.x.x for new OMCD version
e. support FSB 267MHz (LGA775) CPU for MS-7160
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.0.2 Build Date: 2005.05.03
a. Fan control(auto mode) again after resuming from suspend
b. new mainboard :
MS-7151 (ClockGen:ICS 951416AG, Linear over clock, South
Bridge:ATI IXP400, NorthBridge:ATI RS480)
MS-7157 (ClockGen:RTM363-213, Linear over clock, SouthBr
idge:Intel 82801EB, NorthBridge:Intel 848P)
c. Modify DetectLM78() to auto-get correct ISA IOPort(2E/2F or 4
E/4F)
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.0.3 Build Date: 2005.05.12
a. new mainboard :
MS-7185 (ClockGen:CK8-04 , nVidia CK8-04)
MS-7143 v2X(ClockGen:RTM862-480 , SouthBridge: Intel 828
01FB,NorthBridge:Intel 915P)
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.0.4 Build Date: 2005.05.24
a. fix MS-7058 Fan Control failed issue
b. remove MS-6728 v2 NB Fan Control Item for FAE request
c. fix MS-7166 Vcore failed issue
d. fix auto-get correct ISA IOPort(2E/2F or 4E/4F) failed issue
e. new mainboard :
MS-7176 (ClockGen:ICS 954519BGLF , SouthBridge: Intel 82
801GB,NorthBridge:Intel 945P)
f. patch MS-7166 sys/nb fan location
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.0.5 Build Date: 2005.06.21
a. fix MS-7151 Vcore warning color
b. enable MS-7160 watch-dog (C19 NB)
c. correct the show of CK8-04 MB PCI-E clock
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.0.6 Build Date: 2005.07.28
a. completely support MS-7158 (ClockGen:ICS 954519BGLF , watch-
dog(MS8), SouthBridge: Intel 82801GB,NorthBridge:Intel 955X)
b. new mainboard:
MS-7175 (ClockGen:ICS 954119DF , watch-dog , SouthBridge
: Intel 82801FB, NorthBridge: Intel 915)
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.0.7 Build Date: 2005.08.25
a. update Glm7x.dll/NTGlm7x.sys(v0.5.8.22) and RushTop.dll/RushT
op.sys(v0.5.8.25) for MS-7194
b. new mainboard:
MS-7194 (ClockGen:ICS 951422AGLF, watch-dog, SouthBridge
: ATI RD480, NorthBridge: ULi M1573)
c. update Glm7x.dll/NTGlm7x.sys(v0.5.8.25) for MS-7194
so, Redefine MS-7194 be SpecialMB=8 for CPU Fan(0x3F)
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.0.8 Build Date: 2005.10.25
a. add MS-7194 cpu/sys fan control
b. new mainboard :
MS-7203 v0B (ClockGen:nVidia C19, nVidia C19+MCP51, watc
h-dog(C19 NB), Linear over clock)
MS-7028 v2.0 (ClockGen:ICS 954129BF, Linear over clock ,
watch-dog(ICS), SouthBridge: Intel 82801FB,NorthBridge:Intel 915P)
MS-7176 v2.0 (ClockGen:ICS 954519BGLF, Linear over clock
, watch-dog(MS7), SouthBridge: Intel 82801GB,NorthBridge:Intel 945PL)
c. update Glm7x(v0.5.10.12) and RushTop(v0.5.10.11)
d. add MS-7176 v1.0 watch-dog(MS7)
e. fix MS-7194 FirstClk parameter failed issue(becuase one K8 46
00 cpu can over colck exceed 267MHz)
f. update RushTop.sys(v0.5.10.24) and nTune 3.00.14.05 API for
MS-7220 (ClockGen:nVidia CK804, nVidia C51D+CK804, perce
nt over clock)
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.0.9 Build Date: 2005.11.11
a. change MS-7176 v2.0 linear over clock to be PERCENT (avoid ov
er certain FSB then reboot, cause no display issue)
b. support 64bit XP (update RushTop v0.5.11.2)
c. correct MS-7220 CPU Voltage adjustment
d. add ICS954519BGLF M/N Enable bit(Byte1) for MS-7176 v2 (its d
efault fsb(200) disable Byte1)
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.1.0 Build Date: 2005.11.21
a. new mainboard :
MS-7236 (ClockGen:ICS 954519BGLF, Linear over clock , wa
tch-dog(MS7), SouthBridge: Intel 82801GB,NorthBridge:Intel 945PL)
b. fix MS-7160 (C19,C51 etc.) ratio error when nTune running
c. fix MS-7203 v0B NB Fan warning failed issue
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.1.1 Build Date: 2005.01.16
a. new mainboard :
MS-7125 v3.0 (Chipset: NForce4(CK804), ClockGen: CK804,
Percent over clock)
MS-7246 (ClockGen:ICS 954519BGLF, Linear over clock , wa
tch-dog(MS7), SouthBridge: Intel 82801GB,NorthBridge:Intel 945PL)
MS-7203 v1.0 (ClockGen:nVidia C19-C1, nVidia C19-C1+MCP5
1, watch-dog(C19-C1 NB), Linear over clock)
b. support MS-7100 Performance BIOS v5.09
- add CPU Voltage to 23.3% and Memory Voltage to 2.90v,3
.00v,3.10v
c. MS-7176 v1.0 system fan show N/A to path HWMonitor disordered
issue
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.1.2 Build Date: 2006.01.26
a. new mainboard :
MS-7125 v3.0A (Chipset: NForce4(CK804), ClockGen: CK804
API, Percent over clock)
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.1.3 Build Date: 2006.03.23
a. new mainboard :
MS-7260 (Chipset: nVidia MCP55, ClockGen: MCP55 API, Per
cent over clock)
MS-7250 (Chipset: nVidia MCP55, ClockGen: MCP55 API, Per
cent over clock, Percent pci-e over clock)
b. fix MS-7125 v3.0A CPU Fan Control failed issue and add CPU Vo
ltage item 23.3%
c. fix fix K8 CPU of nVidia MB Cool'n'Quiet failed issue by dete
ct "IsK8CPU" first in OnInitDialog()
d. increase MS-6702E(v930 bios) cpu temperature for FAE request
e. fix CK8S MB default button of FSB will show wrong FSB issue
f. replace MS-7250 PCI-E with NB voltage, modify DDR Voltage to
read/write MS6 CR02
g. new mainboard :
MS-7226 (Chipset: nVidia C51D(NB)+MCP55(SB), ClockGen: N
V API, Percent over clock)
h. fix driver via SMBus can't read nVidia CPU Temp. issue
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.1.4 Build Date: 2006.04.18
a. fix MS-7250 v1.0 CPU Voltage can't write issue
b. change MS-7226 cpu/sys fan icon to be cpu/nb by PM request
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.1.5 Build Date: 2006.05.12
a. new mainboard :
MS-7250 v2.0 (Chipset: nVidia MCP55, ClockGen: MCP55 API
, Percent over clock)
b. change MS-7250 v1.0 cpu temp to read SMBus(bios suggestion, o
riginal is read ISA Sensor2)
c. fix MS-7236 default button of FSB will show wrong FSB issue
d. modify MS-7125 v3.A DMI Check from "3.0A" to "3.A" for BIOS v
710
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.1.6 Build Date: 2006.05.25
a. new mainboard :
MS-7280 v0A (Chipset: ATI RD580+SB600, ClockGen: ICS 951
462AGLF, Linear over clock)
b. change MS-7226 v1.0 MS6 SMBus Base from 0x2D00 to 0x2E00 (by
HW changed)
c. fix saved fsb will overclock wrong when different fsb CPU(133
,200) exchange overclocking(MS-7236)
d. new mainboard :
MS-7279 v1.0 (Chipset: Intel P965E+ICH7, ClockGen: ICS 9
LPRS510CGLF, Linear over clock, watch-dog(MS7))
e. change MS-7250 (v1.0,v2.0) CPU Temp. reading from 0x00h to 0x
01h by BIOS suggestion
f. support MS-7280 v1.0
- modify CPUFANIN1(0x3Fh) -> CPUFANIN0(0x29h) by pcb cha
nged
- modify CPU Temp. reading from FinTek 75383 by pcb chan
ged
- modify CPU voltage operation in "apply" function
g. new mainboard :
MS-7235 v1.0 (Chipset: Intel P965+ICH8, ClockGen: ICS 9L
PRS510CGLF)
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.1.7 Build Date: 2006.07.26
a. modify rdmsr(64).asm to fix AMD Semprom 2600+/2800+ K8 CPU ca
n't overclock issue
b. new mainboard :
MS-7235 v1.1 (Chipset: Intel P965+ICH8, ClockGen: ICS 9L
PRS510EGLF,Linear over clock,watch-dog(MS7))
c. fix new Intel 775 CPU(FSB 266) ratio error issue by WMI
d. change MS-7250(v1.0,v2.0) CPU Temp. register from Fintek to W
83627EHG Sensor2 (PM request)
e. support MS-7236 v2.1(W83627DHG)
--------------------------------------------------------------------------------
--------------------
New Version: 2.0.1.8 Build Date: 2006.08.09
a. new mainboard :
MS-7267 v2.1,v3.0 (Chipset: Intel 945GZ+ICH7, ClockGen:
ICS 954519BGLF,Linear over clock,watch-dog(MS7))
--------------------------------------------------------------------------------
--------------------