Scribd Logo
Upload

Welcome to Scribd!

  • 6K views

    ESP8266 Basic On-Off

    Uploaded by

    lvolders4833
    This document configures an ESP8266 WiFi module to operate as a WiFi station and connect to a specified router and password. It then creates a TCP network server listening on port 80. It defines two GPIO pins as outputs for controlling LEDs. When a request is received, it parses the request and checks for GET parameters to control writing high or low values to the GPIO pins, toggling the LEDs. A response is sent back with an HTML page allowing control of the LEDs.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd

    ESP8266 Basic On-Off

    Uploaded by

    lvolders4833
    6K views1 page
    This document configures an ESP8266 WiFi module to operate as a WiFi station and connect to a specified router and password. It then creates a TCP network server listening on port 80. It defines two GPIO pins as outputs for controlling LEDs. When a request is received, it parses the request and checks for GET parameters to control writing high or low values to the GPIO pins, toggling the LEDs. A response is sent back with an HTML page allowing control of the LEDs.

    Original Description:

    A simple LUA program that publishes a webpage with on-off buttons to control leds.

    Original Title

    ESP8266 basic on-off

    Copyright

    © © All Rights Reserved

    Available Formats

    TXT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document configures an ESP8266 WiFi module to operate as a WiFi station and connect to a specified router and password. It then creates a TCP network server listening on port 80. It defines two GPIO pins as outputs for controlling LEDs. When a request is received, it parses the request and checks for GET parameters to control writing high or low values to the GPIO pins, toggling the LEDs. A response is sent back with an HTML page allowing control of the LEDs.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    6K views1 page

    ESP8266 Basic On-Off

    Uploaded by

    lvolders4833
    This document configures an ESP8266 WiFi module to operate as a WiFi station and connect to a specified router and password. It then creates a TCP network server listening on port 80. It defines two GPIO pins as outputs for controlling LEDs. When a request is received, it parses the request and checks for GET parameters to control writing high or low values to the GPIO pins, toggling the LEDs. A response is sent back with an HTML page allowing control of the LEDs.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    of 1

    wifi.setmode(wifi.

    STATION)
    wifi.sta.config("ROUTERNAME","PASSWORD")
    srv=net.createServer(net.TCP)
    srv:listen(80,function(conn)
    led1 = 3
    led2 = 4
    gpio.mode(3, gpio.OUTPUT)
    gpio.mode(4, gpio.OUTPUT)
    gpio.write(3, gpio.LOW);
    gpio.write(4, gpio.LOW);
    conn:on("receive", function(client,request)
    local buf = "";
    local _, _, method, path, vars = string.find(request, "([A-Z]+) (.+)?(.+
    ) HTTP");
    if(method == nil)then
    _, _, method, path = string.find(request, "([A-Z]+) (.+) HTTP");
    end
    local _GET = {}
    if (vars ~= nil)then
    for k, v in string.gmatch(vars, "(%w+)=(%w+)&*") do
    _GET[k] = v
    end
    end
    buf = buf.."<h1> ESP8266 Web Server</h1>";
    buf = buf.."<h1> Copyright Lucje 2015</h1>";
    buf = buf.."<p>GPIO0 <a href=\"?pin=ON1\"><button>ON</button></a>&nbsp;<
    a href=\"?pin=OFF1\"><button>OFF</button></a></p>";
    buf = buf.."<p>GPIO2 <a href=\"?pin=ON2\"><button>ON</button></a>&nbsp;<
    a href=\"?pin=OFF2\"><button>OFF</button></a></p>";
    local _on,_off = "",""
    if(_GET.pin == "ON1")then
    gpio.write(led1, gpio.HIGH);
    elseif(_GET.pin == "OFF1")then
    gpio.write(led1, gpio.LOW);
    elseif(_GET.pin == "ON2")then
    gpio.write(led2, gpio.HIGH);
    elseif(_GET.pin == "OFF2")then
    gpio.write(led2, gpio.LOW);
    end
    --buf = buf.."<option".._on..">ON</opton><option".._off..">OFF</option><
    /select></form>";
    client:send(buf);
    client:close();
    collectgarbage();
    end)
    end)

    You might also like