MK2A S9000 0001C Install Maint

S9000 Installation and
Maintenance
MK2A-S9000-0001 [B]
6601 S. Bermuda Rd, Las Vegas, NV 89119 z1-877- GO BALLY zwww.ballytech.com
Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

The following are trademarks of Bally Gaming, Inc.:
Alpha Game Platform.
All other product names and trademarks are the intellectual property of their respective owners.
This documentation contains confidential and proprietary information of Bally Gaming, Inc. No portion of this
document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any
purpose, without the express written permission of Bally Gaming, Inc.
The specifications and information contained in this documentation are subject to change without notice. All
statements, information, illustrations, specifications and recommendations in this documentation are believed to be
accurate but are provided without warranty of any kind, expressed or implied.
ii
MK2A-S9000-0001 [B]
S9000 Installation and Maintenance
Contents
Reader Comment Form
Chapter 1: Overview
Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2
Specifications and Digital Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2
Physical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 5
Specification Summaries for S9-1S Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 5
Specification Summaries for S9-1V Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 6
Flammable Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 7
Example of Overall Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 10
Mounting Detail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 11
Required Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 12
Lock and Cam Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 12
Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 12
Installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 13
Pre-Installation Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 13
Installation Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 13
Chapter 2: Installation
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
Unpacking and Inspecting the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2
Installing the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3
Installing Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4
Powering On the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5
MK2A-S9000-0001 [B]
iii
Contents
Chapter 3: Relocating the Cabinet

Relocate a Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
Chapter 4: Periodic Maintenance

Periodic Maintenance Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2
Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3
Cabinet Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3
LEDs and Lamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3
Cabinet Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3
Locks and Key Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3
Machine Door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4
Player Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4
All Glass. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4
Coin Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
Coin Acceptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
COD Board Optics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
Coin Diverter Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
Coin Hopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6
Coin Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6
Hopper Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6
Coin Bowl and Pinwheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6
Bill Acceptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 7
EPROM or EEPROM (Flash Memory) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 7
Bill Path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 7
Timing Belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 7
Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 7
Handle Mechanism. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 8
Release Solenoid and Ratchet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 8
Reel Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 9
Reel Optics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 9
Reel Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 9
Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 10
Viewable Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 10
Position, Color, and Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 10
Touch Screen Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 10
Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 11
EPROM or EEPROM (Flash Upgrade) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 11
iv
MK2A-S9000-0001 [B]
Contents
Print Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 11
Main Processing Unit (MPU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 12
EPROM or CompactFlash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 12
MK2A-S9000-0001 [B]
Contents
vi
MK2A-S9000-0001 [B]
Reader Comment Form
Reader Comment Form
FAX this form to: 1-702-584-7710

ATTN: Technical Publications Dept.
Report an Error
Page ______ Description (Use additional pages as needed.) __________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
Provide Feedback
Usefulness of This Guide
How do you use this guide? (Circle one.)
Only as a reference
All the time
Not at all
Why do you use the guide this way? ____________________________________________________

This guide tells you everything you need to do your job. (Circle one.)
Yes
No
If no, what is missing? _______________________________________________________________

_________________________________________________________________________________
Ease-of-Use
Which do you use the most to find information? (Circle one.)
Table of Contents
Index
How clear, concise, and easy to follow are the procedures? ___________________________________
How could these procedures be easier to follow? __________________________________________
_________________________________________________________________________________
Organization of This Guide
Are the topics within each chapter grouped properly? ______________________________________
Is the document organized so topics are easy to find?
Yes
No
If no, which topics were not easy to find? ________________________________________________

Other Comments
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
Reader Contact Information (If you would like to be contacted directly.)

Name ___________________________________ Company _______________________________
Telephone ________________________________ E-mail _________________________________
MK2A-S9000-0001 [B]
vii
Reader Comment Form
viii
MK2A-S9000-0001 [B]
Chapter 1
Overview
This section includes the following topics:

Installation Requirements
Required Parts
Required Tools
Installation Checklist
MK2A-S9000-0001 [B]
1-1
Chapter 1: Overview
This section includes requirements applicable to the S9000 cabinet.
Specifications and Digital Images

The following table provides descriptions and figures of S9000 machines:
S9000 Descriptions
ALPHA S9000
(S9-1Sx--15)
X indicates the number of reels. 15 indicates a 15 inch, flat panel

display in a 17 inch, oval top box.
ALPHA Elite S9C

(S9-1SxA-TG)
X indicates the number of reels. A indicates the Alpha Game
Platform and a door with a 6.3 inch flat panel display. The top box
does not contain a monitor. TG indicates a 17 inch, oval top box
with a player participation panel and a glass game theme panel.
1-2
MK2A-S9000-0001 [B]
Chapter 1: Overview
S9000 Descriptions
ALPHA Elite S9C
(S9-1SxC-TG)
X indicates the number of reels. C indicates an S6000 to Alpha PCI
Convertor board and a door with a 6.3 inch flat panel display. TG
indicates a 17 inch, oval top box with a player participation panel
and a glass game theme panel.
ALPHA Elite S9E

(S9-1Sx--20)
X indicates the number of reels. 20 indicates a 20 inch, flat panel

display in a 17 inch oval top box.
ALPHA Elite V20

(S9-1V20-OG)
V20 indicates a video cabinet with a 20.1 inch monitor in the door.
OG indicates a 17 inch, oval top box and a glass game theme panel.
The top box does not contain a monitor.
MK2A-S9000-0001 [B]
1-3
Chapter 1: Overview
S9000 Descriptions
ALPHA Elite V20/20
(S9-1V20-20)
V20 indicates a video cabinet with a 20.1 inch monitor in the door.
20 indicates a 20 inch, flat panel display in a 17 inch oval top box.
This cabinet configuration supports server based gaming.
ALPHA Elite V32

(S9-1V32-7G)
V32 indicates a video cabinet with a 32 inch portrait monitor. The

top box does not contain a monitor. 7G indicates a 7 inch oval top
box and a glass game theme panel. The top box does not contain a
monitor.
1-4
MK2A-S9000-0001 [B]
Chapter 1: Overview
Physical Specifications
The following topics are included in this section:
Specification Summaries for S9-1S Machines
Specification Summaries for S9-1V Machines
Specification Summaries for S9-1S Machines

The following table displays specifications for individual S9-1S machines:
Specification Summary for S9-1S Machines
Description
S9-1Sx--15
S9-1SxA-TG
S9-1SxC-TG
S9-1Sx--20
120 VAC
120 VAC
120 VAC
120 VAC
Idle State
2.0 A
2.0 A
2.0 A
2.0 A
Operating State
2.5 A
2.5 A
2.5 A
2.5 A
Fuse Limited Rated Current
6.3 A
6.3 A
6.3 A
6.3 A
Idle State
240 W
240 W
240 W
240 W
Operating State
300 W
300 W
300 W
300 W
870
870
870
870
250 Lbs. (113.64 Kg)
250 Lbs. (113.64 Kg)
250 Lbs. (113.64 Kg)
250 Lbs. (113.64 Kg)
Height,
without Tower Light
52.10 Inches
(132.33 cm)
52.10 Inches
(132.33 cm)
52.10 Inches
(132.33 cm)
52.10 Inches
(132.33 cm)
Width
21.50 Inches
(54.61 cm)
21.50 Inches
(54.61 cm)
21.50 Inches
(54.61 cm)
21.50 Inches
(54.61 cm)
Depth
22.86 Inches
(58.06 cm)
22.86 Inches
(58.06 cm)
22.86 Inches
(58.06 cm)
22.86 Inches
(58.06 cm)
Electrical Specifications
Line Voltage at 60 Hz
Current @ 120 VAC
Power
Power Consumption
BTU/Hr
Mechanical Specifications
Weight
Dimensions
Operating Environment (Recommended)

Temperature Range
4 - 40 Degrees Celsius (39.2 - 104 Degrees Fahrenheit)
Humidity (Maximum)
90%
CAUTION: To prevent temperature and humidity related stress on the machine, operate
the machine within the recommended guidelines. Operating the machine
outside the recommended guideline may increase the required maintenance.
MK2A-S9000-0001 [B]
1-5
Chapter 1: Overview
Specification Summaries for S9-1V Machines

The following table displays specifications for S9-1V machines:
Specification Summary for S9-1V Machines
Description
S9-1V20-OG
S9-1V20-20
S9-1V32-7G
120 VAC
120 VAC
120 VAC
Idle State
2.0 A
2.0 A
2.0 A
Operating State
2.5 A
2.5 A
2.5 A
Fuse Limited Rated Current
6.3 A
6.3 A
6.3 A
Idle State
240 W
240 W
240 W
Operating State
300 W
300 W
300 W
870
870
870
250 Lbs. (113.64 Kg)
265 Lbs. (120.45 Kg)
285 Lbs. (129.55 Kg)
Height,
without Tower Light
52.10 Inches
(132.33 cm)
52.10 Inches
(132.33 cm)
59.05 Inches
(150.00 cm)
Width
21.50 Inches
(54.61 cm)
21.50 Inches
(54.61 cm)
21.50 Inches
(54.61 cm)
Depth
22.86 Inches
(58.06 cm)
22.86 Inches
(58.06 cm)
22.86 Inches
(58.06 cm)
Electrical Specifications
Line Voltage at 60 Hz
Current @ 120 VAC
Power
Power Consumption
BTU/Hr
Weight
Dimensions
Operating Environment (Recommended)

Temperature Range
4 - 40 Degrees Celsius (39.2 - 104 Degrees Fahrenheit)
Humidity (Maximum)
90%
CAUTION: To prevent temperature and humidity related stress on the machine, operate
the machine within the recommended guidelines. Operating the machine
outside the recommended guideline may increase the required maintenance.
1-6
MK2A-S9000-0001 [B]
Mechanical Specifications
Chapter 1: Overview
Flammable Weights
The following tables display flammable weights for specific S9000 machines:
Flammable Weights for S9-1Sx--15
Flammable Weights for S9-1SxC-TG
Flammable Weights for S9-1V20-OG
Flammable Weights for S9-1V32-7G
Flammable Weights for S9-1Sx--15

Item Description
Pounds
Kilograms
6.1
2.77
0.45
Reel Tapes, (Quantity of 5)
0.2
0.09
Buttons, (Quantity of 13)
0.2
0.09
Boards
5.2
2.36
Cables
3.3
1.50
15 Inch Monitor
3.4
1.55
Medium Density Fiberboard (MDF) Base
4.8
2.18
CC16 Coin Acceptor
0.3
0.14
Standard Hopper
2.04
0.93
26.54
12.06
Bezel, Arm Rests, Coin Chute, and Miscellaneous Items

Reels, (Quantity of 5)
Flammable Weight
Totals
MK2A-S9000-0001 [B]
1-7
Chapter 1: Overview
Flammable Weights for S9-1SxC-TG

Flammable Weight
Pounds
Kilograms
6.1
2.77
Reels, (Quantity of 5)
0.6
0.27
Reel Tapes, (Quantity of 5)
0.2
0.09
0.2
0.09
Boards
5.2
2.36
Cables
3.3
1.50
6.3 Inch Monitor
2.8
1.27
4.8
2.18
CC16 Coin Acceptor
0.3
0.14
Standard Hopper
2.04
0.93
25.54
11.61
Totals
Flammable Weights for S9-1V20-OG

Item Description
Flammable Weight
Pounds
Kilograms
5.9
2.68
Boards
4.8
2.18
Cables
2.8
1.27
0.2
0.09
20 Inch Monitor
3.7
1.68
4.8
2.18
CC16 Coin Acceptor
0.3
0.14
Standard Hopper
2.04
0.93
24.54
11.15
Totals
1-8
MK2A-S9000-0001 [B]
Item Description
Chapter 1: Overview
Flammable Weights for S9-1V32-7G

Item Description
Flammable Weight
Pounds
Kilograms
5.9
2.68
Boards
4.8
2.18
Cables
2.8
1.27
0.2
0.09
32 Inch Monitor
11.0
4.99
4.8
2.18
CC16 Coin Acceptor
0.3
0.14
Standard Hopper
2.04
0.93
31.84
14.46
Totals
MK2A-S9000-0001 [B]
1-9
Chapter 1: Overview
Example of Overall Dimensions
The following is an example of overall dimensions for the S9-1SxC-TG:
Depth (not shown)

22.86 Inches
(58.06 cm)
Figure 1: Overall Dimension Example - S9-1SxC-TG
1 - 10
MK2A-S9000-0001 [B]
Chapter 1: Overview
Mounting Detail
The following diagram displays cabinet mounting dimensions:
9.61
8.19
2.76
3.00
2.07
3.07
3.07
1.76
CL
12.77
13.51
15.63
10.44
15.63
.44
6.89
3.53 +.030
-.000
3.76
8.21
3.06
+.030
-.000
Figure 2: Cabinet Mounting Dimensions
MK2A-S9000-0001 [B]
1 - 11
Chapter 1: Overview
Required Parts
This installation may require the following additional parts:
Locks (quantity 5 to 7, depending on your machine configuration).
Category 5 network cables, for linking game controllers, if required (quantity and length
depending on your machine configuration and your floor plan).
Lock and Cam Specification

Purchase locks for installation in each machine cabinet before installing machines. Single or dual lock
configurations are possible. All lock openings are 5/8 inch (1.59 cm) by 3/4 inch (1.91 cm). The locks are
90 degree rotations. Locks 1 and 1/8 inch (2.86 cm) long can be used with spacers to maintain the 1/2 inch
(1.27 cm) lock length.
Figure 3: Lock and CAM Details
TIP: To avoid delays, purchase your machine locks well before your planned installation
date. Purchase several spare machine locks from your lock manufacturer and keep
them available.
Required Tools
This installation requires the following tools:
1 - 12
tools for locks
MK2A-S9000-0001 [B]
Required Parts
NOTE: See your S9000 Assemblies, Parts, and Hardware guide for additional lock and cam
details.
Chapter 1: Overview
Use the following checklist to prepare to install the machine:
Pre-Installation Steps
Complete the following steps before installing the machine:
Purchase, assemble, and install power and network cabling for the desired floor plan.
Purchase and receive locks.
Installation Steps
Complete the following steps to install the machine. See Installation Instructions on page 2 - 1 for details.
Unpacking and Inspecting the Machine
Installing the Machine
Installing Locks
Powering On the Machine
MK2A-S9000-0001 [B]
1 - 13
Chapter 1: Overview
1 - 14
MK2A-S9000-0001 [B]
Chapter 2
Installation
Installation Instructions
This section includes the following installation instructions:
Installing Locks
MK2A-S9000-0001 [B]
2-1

Use the following instructions to unpack and inspect the machine:
STEP 1.
Remove any plastic packaging.

TIP: To prevent damage to the front of the machine, remove the packaging while standing
at the back of the machine. If any marks are made on the back of the cabinet while
opening the packaging, then use shoe polish to minimize the appearance of marks.
STEP 2.
Verify that the serial numbers on the cabinet match the shipping documents associated with
the installation.
STEP 3.
Inspect the cabinet for any shipping damage, such as broken glass, dents, or scratches.
STEP 4.
Inspect the corners of the glass panels for shipping damage.
STEP 5.
Unpack and remove all loose parts from any boxes or bags containing cables, lock cams, and
mounting hardware.
STEP 6.
Remove all plastic or paper packing materials from any interior assemblies, such as a printer.
STEP 7.
Inspect the interior cables and ensure they are firmly connected.
STEP 8.
Inspect the circuit board assemblies and CompactFlash for loose connections and ensure they
are firmly attached.
TIP: During shipping, cables may become disconnected and circuit boards may become
unseated. Ensure they are firmly attached before proceeding.
STEP 9.
2-2
If there is damage to the machine or there are any missing parts, then contact your Bally
Technologies Distributor or Customer Service Representative for Return Merchandise
Authorization (RMA) information.
MK2A-S9000-0001 [B]
CAUTION: Serial numbers on the cabinet must match the shipping documents that are
associated with the installation. Never remove serial numbers from any Bally
equipment.

Use the following instructions to move and connect the machine:
STEP 1.
If the tower light has been installed, then go to the next step.
If the tower light has not been installed, then install the tower light in the top box.
Tower Light
Figure 1: Tower Light
STEP 2.
If the glass in the top box has already been installed, then go to the next step.
If the glass has not been installed, then complete the following steps:
STEP 3.
Verify the design on the glass for the top box matches the software for the game.
Install the glass in the top box.
Move the machine to the desired location, using a lifting and moving device, such as a hand
truck.
CAUTION: The machines are heavy. To prevent injuries and damage, always wear a back
brace, work with a partner and do not use the tower light to move the
machine.
TIP: To move the machine easily over a carpeted area, use a hand truck with solid tires,
not air-filled. The machine can be made lighter for lifting by removing the monitor
before lifting it, and then replacing it at a later time.
STEP 4.
Place the machine at the desired location. Do not place the machine on any wires or cables.
STEP 5.
Open the cabinet door and verify that the cables are not pinched under the machine or any
neighboring machines.
STEP 6.
Secure the machine to the base. Fasten securely to the wall, floor or adjacent object.
STEP 7.
Route the power cable through a cut-out in the base, at the left, right, or rear of the machine as
appropriate for the floor plan layout.
STEP 8.
Connect the power cord.
MK2A-S9000-0001 [B]
2-3
Installing Locks
Use the following instructions to install locks on the machine:
STEP 1.
If the door, stand, and other high-security locks have already been installed, then go to the next
section.
If the door, stand, and other high-security locks have not been installed or if your cabinet
contains locks used for shipping purposes only, then order locks from a reliable lock supplier.
See S9000 Assemblies, Parts, and Hardware in the S9000 Operators Instruction Manual for
additional lock cam information.
STEP 2.
Use the instructions provided by your lock manufacturer to install locks on the main door, OS
chip, main processor unit, and any other appropriate areas on your machine. (Machine
configurations may vary.)
TIP: Put the key in the open position to remove the entire lock before removing the nut to
disassemble it.
2-4
MK2A-S9000-0001 [B]

Use the following instructions to start the machine:
STEP 1.
Press the main power switch to supply power to the system.
STEP 2.
Press the cabinet power switch to supply power to the cabinet components.
Game and OS CompactFlash

-ATX Power Switch
Main Power and Cabinet Power
Figure 2: S9000 Power Switches and CompactFlash Locations
STEP 3.
If the Operating System CompactFlash has not been installed, then insert the Operating
System CompactFlash in the top socket.
STEP 4.
If the Game CompactFlash has not been installed, then insert the Game CompactFlash in the
bottom socket.
STEP 5.
Flip the -ATX power switch to supply power to the logic board.
STEP 6.
The machine is now ready for configuration. See Alpha Game Platform Setup and Operation
in the S9000 Operators Instruction Manual for instructions.
MK2A-S9000-0001 [B]
2-5
2-6
MK2A-S9000-0001 [B]
Chapter 3
Relocating the Cabinet
Relocate a Machine
Use the following instructions to relocate a machine:
STEP 1.
Ensure the new location has appropriate power and network cabling installed.
NOTE: Changes in floor configuration may require rerunning power and Category 5
network cables.
STEP 2.
Flip the -ATX power switch off to power off the logic board.
STEP 3.
Press the cabinet switch to power off the cabinet components.
STEP 4.
Press the main power switch to power off the system.
STEP 5.
Unplug and remove the power and network cables.
STEP 6.
Place the machine at the desired location. Do not place the machine on any wires or cables.
STEP 7.
To remove the machine from service, stop here.

To relocate and restart the machine, go to the next step.
STEP 8.
Open the cabinet door and verify that no cables are pinched at any location.
STEP 9.
Secure the machine to the base.
STEP 10. Connect and route the power and network cables through the cut-out provided at the left,
right, or rear of the base as appropriate for the floor plan.
STEP 11. Press the main power switch to supply power to the cabinet.
MK2A-S9000-0001 [B]
3-1
Chapter 3: Relocating the Cabinet
STEP 12. Press the cabinet power switch to supply power to the cabinet components.
STEP 13. Flip the -ATX power switch on to supply power to the logic board.
3-2
MK2A-S9000-0001 [B]
Relocate a Machine
Chapter 4
Periodic Maintenance
This section provides periodic maintenance information for all machine models and the following
components:
NOTE: Machine configurations may vary.
Cabinet
Machine Door
Coin Entry
Coin Hopper
Bill Acceptor
Handle Mechanism
Reel Drive
Monitor
Printer
Main Processing Unit (MPU)
MK2A-S9000-0001 [B]
4-1
Periodic Maintenance Schedule

The following table indicates the recommended periodic maintenance schedule:
Maintenance Item
Service Interval (Days)

30
Cabinet Interior
Cabinet
60
X
LEDs and Lamps
Cabinet Exterior
Locks and Key Switches

Machine Door
Player Panel Buttons
All Glass
Coin Acceptor
Coin Entry
COD Board Optics
X
X
Coin Diverter Inspection

Coin Switch
Coin Hopper
X
X
Hopper Test
Coin Bowl and Pinwheel
Bill Acceptor
Handle Mechanism
Reel Drive
Monitor
Printer
MPU
4-2
90
EPROM (Flash Memory)
Bill Path
Timing Belts
Sensors
Release Solenoid and Ratchet
Reel Optics
Reel Strip
Viewable area
Position, Size, and Intensity
Touch Screen Calibration
EPROM or EEPROM (Flash Upgrade)
Print Head
EPROM, Operating System and Game CompactFlash
MK2A-S9000-0001 [B]
Periodic Maintenance Schedule
Assembly
Cabinet
Use the following instructions to maintain the cabinet components:
Cabinet Interior
Vacuum the inside of the cabinet.
Remove all dust and debris from the coin chutes.
Remove loose coins to keep them from shorting electrical connections.
Inspect the cabinet wiring for pinched or frayed wires.
Confirm that the mounting hardware fully secures the cabinet to the stand.
Inspect the power cord for signs of overheating.
LEDs and Lamps
Replace any burned out LEDs or lamps. Faulty starters may cause flickering fluorescents. All
fluorescents illuminate when switching on the machine power.
Inspect ballasts for overheating.
Locate burned out button LEDs and feature lamps by playing the machine or by activating the
Output Test as described in the Alpha Game Platform Setup and Operation guide.
Cabinet Exterior
The laminate or powder coat exterior of the cabinet requires little maintenance except for occasional
dusting. Avoid abrasive cleansers.
Locks and Key Switches
Check connections of Key Switches for loose or frayed wires.
Add a small amount of graphite if the key does not turn easily.
Check that all lock hardware is secure, yet allowing the lock to work smoothly.
Cabinet
MK2A-S9000-0001 [B]
4-3
Machine Door
Use the following instructions to maintain the machine door components:
Player Panel Buttons

Use a dry, lint-free cloth to clean the buttons. If a cleaning solution is necessary, use a mild glass cleaner.
Avoid abrasive cleansers.
All Glass
Use a dry, lint-free cloth to remove the dust from the glass. Use a mild glass cleaner if necessary. Avoid
abrasive cleansers or anything that will damage the protective laminate on the inside of the Display Glass
and Feature Glass. Replace faded decals.
4-4
MK2A-S9000-0001 [B]
Machine Door
Coin Entry
Use the following instructions to maintain the coin entry components:
Coin Acceptor
Disassemble and clean to remove metal coin fragments.
Adjust and calibrate according to the manufacturer specifications.
Inspect connections for frayed or broken wires.
COD Board Optics

The Coin Optic Decoder Board uses an infrared emitter and detector to monitor coins. The emitter and
detector are on the same side of the COD board. The emitter shines through the assembly and reflects
back to the detector using a prism. Use a lint-free cloth to clean the prism. Check the prism bracket to
ensure that the prism is secure.
Coin Diverter Inspection

With power off, the Coin Diverter Assembly should pivot freely. Activate the Output Test as described in
the Alpha Game Platform Setup and Operation guide, to verify operation.
Coin Entry
MK2A-S9000-0001 [B]
4-5
Coin Hopper
Use the following instructions to maintain the coin hopper components:
Coin Switch
Upright and Bartop machines use optical switches to count coins from the hopper. Use a dry, lint-free
cloth to clean the lenses.
Check the adjustment of the micro switch on slant machines.
Hopper Test
Activate the Hopper Test as described in the Alpha Game Platform Setup and Operation guide. The
hopper will dispense 10 coins.
Coin Bowl and Pinwheel
4-6
Remove the coin bowl and pinwheel and clean thoroughly to remove coin metal fragments.
Inspect the hopper knife for excessive wear. Replace, if necessary.
Inspect the coin probe for broken or frayed wires.
MK2A-S9000-0001 [B]
Coin Hopper
Bill Acceptor
Use the following instructions to maintain the bill acceptor components:
EPROM or EEPROM (Flash Memory)

Verify the EPROM or EEPROM (flash upgrade) version is correct and is the latest revision. For example,
there may be a newer version available for the changing currency. Replace, if necessary.
Bill Path
Open the acceptor and transport components. Use a dry lint-free cloth to remove any debris.
Timing Belts
Replace frayed or worn belts.
Sensor
Replace dirty, clouded, or scratched lenses as they may degrade the performance of the acceptor. Clean the
sensors with a dry lint-free cloth. If cleaning requires a solvent, then use a weak solution of water and mild
dish detergent. Allow the lenses to dry completely before closing the acceptor and transport assembly.
Activate the Bill Acceptor Test as described in the Alpha Game Platform Setup and Operation guide, to
verify operation.
Bill Acceptor
MK2A-S9000-0001 [B]
4-7
Handle Mechanism
Use the following instructions to maintain the handle mechanism components:
Release Solenoid and Ratchet

The handle mechanism consists of a ratchet assembly, an optic sensor, a release solenoid, and an arm
assembly. Inspect the handle mechanism for proper function and to ensure handle arm is secure.
Press the pseudo coin button to energize the handle release solenoid and allow the handle to move. Pull
the handle and check for smooth ratchet operation. The reels should spin when the handle is in the full
forward position. Release the handle and ensure it returns and locks into its original upright position.
CAUTION: The handle mechanism is factory lubricated and does not require additional
lubrication or adjustment.
4-8
MK2A-S9000-0001 [B]
Handle Mechanism
Reel Drive
Use the following instructions to maintain the reel drive components:
Reel Optics
Optical sensors monitor the reel positions. Clean the reel optics with a dry lint-free cloth or swab. Dirty
reel optics can cause reel movement tilts on some machine configurations.
Reel Strip
Clean each reel strip with a soft cloth moistened with warm water. Use new tape to reattach any reel strips
that are showing signs of separation.
Reel Drive
MK2A-S9000-0001 [B]
4-9
Monitor
Use the following instructions to maintain the monitor components:
Viewable Area
Abrasive or ammonia-based cleaners can damage the material bonding the Micro Touch touch screen to
the monitor. Clean the monitor with an antistatic nonabrasive cloth and a cleaner recommended for
laptop computer screens.
Position, Color, and Size

Check for correct horizontal and vertical alignment by ensuring that all text and images are within the
borders of the monitor bezel. Use the monitor color and screen size diagnostics as described in the Alpha
Game Platform Setup and Operation guide.
Settings for the touch screen will change over time, or with any adjustment made to the monitor. Calibrate
the touch screen according to the directions described in the Alpha Game Platform Setup and Operation
guide.
4 - 10
MK2A-S9000-0001 [B]
Monitor
Touch Screen Calibration
Printer
Use the following instructions to maintain the printer components:
EPROM or EEPROM (Flash Upgrade)

Verify the firmware, EPROM or EEPROM (flash upgrade) version is correct and is the latest revision.
Replace, if necessary.
Print Head
After opening the unit, the ticket path is accessible for cleaning or clearing tickets. Use a soft brush to
clean the paper dust from inside the printer and chassis area. Also remove the paper dust from the sensor
optics. If streaking on the printed ticket is evident, the thermal print head may need cleaning.
Cleaning cards are available for thermal printers through TransAct Technologies Incorporated or can be
purchased direct from Enefco International Ltd. at (888) 578-0141.
Printer
MK2A-S9000-0001 [B]
4 - 11

Use the following instructions to maintain the MPU components:
EPROM or CompactFlash
Verify the EPROM or CompactFlash (Operating System and Game) software version is correct. Replace, if
necessary.
4 - 12
MK2A-S9000-0001 [B]
Index
Symbols
dimensions 1-5, 1-6

dual lock configuration 1-12
-ATX 2-5, 3-1

E
B
Bally Technologies Distributor 2-2
bill acceptor component maintenance 4-7
broken glass 2-2
EEPROM 4-7, 4-11

EPROM 4-7, 4-11, 4-12
F
C
cabinet component maintenance
door switch optic 4-3
cabinet power switch 3-1
cables 2-2
cams
lock 2-2
category 5 network cables 1-12, 3-1
checklist 1-13
circuit board assemblies 2-2
coin entry component maintenance 4-5
coin hopper component maintenance 4-6
CompactFlash 2-2, 4-12
flammable weight 1-8, 1-9

flash upgrade 4-7, 4-11
G
glass 2-3
glass panels 2-2
H
hand truck 2-3
handle mechanism component maintenance 4-8
dents 2-2
inspecting the machine 1-13, 2-2

MK2A-S9000-0001 [B]
IX - 1
Index
O
OS chip 2-4
lock 1-12, 2-4

cams 2-2
dual lock configuration 1-12
installation 1-13
openings 1-12
single lock configuration 1-12
specification, locks and cams 1-12
power cable 2-3, 3-1

power switch
cabinet 2-5, 3-1
logic board 2-5
main 2-5, 3-1
powering off the machine 3-1
powering on the machine 1-13
pre-installation 1-13
printer 2-2
printer component maintenance 4-11
machine door
component maintenance 4-4
main door 2-4
main power switch 3-1
Main Processing Unit (MPU) component
maintenance 4-12
main processor unit 2-4
maintenance 4-2
bill acceptor components 4-7
cabinet components
door switch optic 4-3
coin entry components 4-5
coin hopper components 4-6
handle mechanism components 4-8
machine door 4-4
monitor components 4-10
MPU components 4-12
printer components 4-11
reel drive components 4-9
schedule 4-2
monitor 2-3
monitor component maintenance 4-10
mounting hardware 2-2
moving the machine 3-1
reel drive component maintenance 4-9

relocating the cabinet 3-1
required tools 1-12
Return Merchandise Authorization (RMA) 2-2
IX - 2
MK2A-S9000-0001 [B]
S
scratches 2-2
serial numbers 2-2
service interval 4-2
shipping damage 2-2
shipping documents 2-2
single lock configuration 1-12
software 2-3
spacers 1-12
T
top box 2-3
tower light 2-3
installation 1-13
checklist 1-13
instructions 2-1
locks 1-13
machine 1-13
pre-installation 1-13
Index
U
unpacking the machine 1-13, 2-2
weight
flammable weight 1-8, 1-9
MK2A-S9000-0001 [B]
IX - 3
Index
IX - 4
MK2A-S9000-0001 [B]

MK2A S9000 0001C Install Maint

Uploaded by

Copyright:

Available Formats

MK2A S9000 0001C Install Maint

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MK2A S9000 0001C Install Maint

Uploaded by

Copyright:

Available Formats

S9000 Installation and

6601 S. Bermuda Rd, Las Vegas, NV 89119 z1-877- GO BALLY zwww.ballytech.com

Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

S9000 Installation and Maintenance

S9000 Installation and Maintenance

Reader Comment Form

Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

S9000 Installation and Maintenance

Chapter 3: Relocating the Cabinet

Chapter 4: Periodic Maintenance

Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

S9000 Installation and Maintenance

Main Processing Unit (MPU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 12

Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

S9000 Installation and Maintenance

S9000 Installation and Maintenance

Reader Comment Form

Reader Comment Form

FAX this form to: 1-702-584-7710

All the time

Why do you use the guide this way? ____________________________________________________

Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

If no, what is missing? _______________________________________________________________

If no, which topics were not easy to find? ________________________________________________

Reader Contact Information (If you would like to be contacted directly.)

S9000 Installation and Maintenance

Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

Reader Comment Form

S9000 Installation and Maintenance

This section includes the following topics:

Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

S9000 Installation and Maintenance

Specifications and Digital Images

Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

X indicates the number of reels. 15 indicates a 15 inch, flat panel

ALPHA Elite S9C

S9000 Installation and Maintenance

ALPHA Elite S9E

Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

X indicates the number of reels. 20 indicates a 20 inch, flat panel

ALPHA Elite V20

S9000 Installation and Maintenance

ALPHA Elite V32

Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

V32 indicates a video cabinet with a 32 inch portrait monitor. The

S9000 Installation and Maintenance

Specification Summaries for S9-1S Machines

Specification Summaries for S9-1V Machines

Specification Summaries for S9-1S Machines

Fuse Limited Rated Current

250 Lbs. (113.64 Kg)

250 Lbs. (113.64 Kg)

250 Lbs. (113.64 Kg)

250 Lbs. (113.64 Kg)

Copyright 2006-2007 Bally Gaming, Inc. All Rights Reserved.

Operating Environment (Recommended)

4 - 40 Degrees Celsius (39.2 - 104 Degrees Fahrenheit)

S9000 Installation and Maintenance