Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    LTE Call Flow - PS Redirection To UTRAN-V2015 0105-V1.0

    Uploaded by

    Ashish
    The document summarizes the LTE PS redirection procedure to UTRAN (3G). The key steps are: 1. The eNB receives a measurement report from the UE indicating that the event criteria A2 is met, meaning the current cell's signal strength has fallen below a threshold. 2. The eNB initiates an RRC connection release with redirection by including information on the target 3G frequency in the message. 3. The UE switches to idle mode and searches for the target 3G cell. If it cannot find it, the redirection is abandoned. 4. The eNB and MME release the UE context and switch the UE state to idle, completing the redirection procedure

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LTE Call Flow - PS Redirection To UTRAN-V2015 0105-V1.0

    Uploaded by

    Ashish
    1K views16 pages
    The document summarizes the LTE PS redirection procedure to UTRAN (3G). The key steps are: 1. The eNB receives a measurement report from the UE indicating that the event criteria A2 is met, meaning the current cell's signal strength has fallen below a threshold. 2. The eNB initiates an RRC connection release with redirection by including information on the target 3G frequency in the message. 3. The UE switches to idle mode and searches for the target 3G cell. If it cannot find it, the redirection is abandoned. 4. The eNB and MME release the UE context and switch the UE state to idle, completing the redirection procedure

    Original Description:

    LTE Call Flow - PS Redirection to UTRAN-V2015 0105-V1.0

    Original Title

    LTE Call Flow - PS Redirection to UTRAN-V2015 0105-V1.0

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes the LTE PS redirection procedure to UTRAN (3G). The key steps are: 1. The eNB receives a measurement report from the UE indicating that the event criteria A2 is met, meaning the current cell's signal strength has fallen below a threshold. 2. The eNB initiates an RRC connection release with redirection by including information on the target 3G frequency in the message. 3. The UE switches to idle mode and searches for the target 3G cell. If it cannot find it, the redirection is abandoned. 4. The eNB and MME release the UE context and switch the UE state to idle, completing the redirection procedure

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views16 pages

    LTE Call Flow - PS Redirection To UTRAN-V2015 0105-V1.0

    Uploaded by

    Ashish
    The document summarizes the LTE PS redirection procedure to UTRAN (3G). The key steps are: 1. The eNB receives a measurement report from the UE indicating that the event criteria A2 is met, meaning the current cell's signal strength has fallen below a threshold. 2. The eNB initiates an RRC connection release with redirection by including information on the target 3G frequency in the message. 3. The UE switches to idle mode and searches for the target 3G cell. If it cannot find it, the redirection is abandoned. 4. The eNB and MME release the UE context and switch the UE state to idle, completing the redirection procedure

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 16

    LTE Call Flow:

    PS Redirection to UTRAN
    Contact: [email protected]
    Created: 2014_1225
    Date and Version

    Author

    Change Note

    2015_0105 v1.0

    Justin MA

    First version

    RRC connection release with redirect

    Main Menu

    Redirection to UTRAN
    UE

    eNB

    NB & RNC

    ECM
    CONNECTED

    MME

    SAE GW

    MSC /
    MSC Server

    SGSN

    LTE related part of the


    redirection procedure

    A2 event criteria
    met

    A2 event measurement report

    RRC Connection Release


    (including selection of redirection target)

    UE Context Release

    Target RAT related part of the


    redirection procedure

    Target RAT Initial Access -> RRC Connection Setup

    Routing Area Update with EPC interaction (including Authentication & Ciphering & Security Mode setup; EPS Bearers to PDP Contexts mapping)

    PS session establishment (paging for DL transfer; service request, PDP Contexts activation including RAB setup)

    Data transfer

    Ref: NSN

    LTE EMM and ECM States

    Ref: NETMANIAS

    Glossary
    EPS: Evolved Packet System
    ECM: EPS Connection Management
    ESM: EPS Session Management
    EMM: EPS Mobility Management

    Figure: EPS with interface name

    Ref: http://awanetwork.blogspot.tw/

    RRC connection release with redirect

    Main Menu

    Redirection to UTRAN

    Having received RRC: Measurement


    Report triggered by dedicated Event A2,
    eNB selects target layer
    blind selection based on parameters
    setting and UE capabilities
    Having determined target layer, eNB
    initiates RRC connection release with
    redirection by sending RRC: RRC
    CONNECTION RELEASE message
    ReleaseCause is set to other
    redirectedCarrierInfo IE provides the
    UE with information on target layer
    UE switches to RRC-IDLE mode and
    searches for suitable cell within indicated
    layer
    If no suitable redirection target is found,
    redirection procedure is abandoned
    RRC Connection and UE Context are not
    released at this point of time

    Ref: NSN

    RRC connection release with redirect

    Table of Contents

    Main Menu

    Redirection to UTRAN

    Having released RRC connection,


    eNB initiates UE context release by
    sending S1AP: UE CONTEXT
    RELEASE REQUEST message to the
    MME
    cause: Radio Network Layer
    cause: E-UTRAN Generated
    Reason if redirection towards
    LTE layer
    cause: Radio Network Layer
    cause: Inter-RAT Redirection if
    redirection towards other RAT,
    these cause values indicate to
    the MME that the PS service
    suspension is not required in the
    EPC
    MME orders eNB to release UE
    dedicated resources and remove
    UE contexts
    MME changes the UE state from
    ECM-CONNECTED to ECM-IDLE

    Ref: NSN

    LTE Measurement Event A2

    Ref:

    Real L3 Call Flow Message View


    Start Time:

    2014-11-14 08:00

    Timestamp
    0
    0.003
    0.004
    0.021
    0.023
    0.05
    0.057
    0.058
    0.079
    0.086
    0.087
    0.099
    0.123
    0.146
    3.266
    3.266
    3.267
    3.288
    3.289

    Cell ID
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730

    Message
    RRC_RRC_CONNECTION_REQUEST
    INTERNAL_PER_RADIO_UE_MEASUREMENT_TA
    RRC_RRC_CONNECTION_SETUP
    RRC_RRC_CONNECTION_SETUP_COMPLETE
    S1_INITIAL_UE_MESSAGE
    S1_INITIAL_CONTEXT_SETUP_REQUEST
    RRC_SECURITY_MODE_COMMAND
    RRC_RRC_CONNECTION_RECONFIGURATION
    RRC_SECURITY_MODE_COMPLETE
    RRC_RRC_CONNECTION_RECONFIGURATION_COMPLETE
    S1_INITIAL_CONTEXT_SETUP_RESPONSE
    RRC_MEASUREMENT_REPORT
    RRC_RRC_CONNECTION_RECONFIGURATION
    RRC_RRC_CONNECTION_RECONFIGURATION_COMPLETE
    RRC_MEASUREMENT_REPORT
    RRC_RRC_CONNECTION_RELEASE
    S1_UE_CONTEXT_RELEASE_REQUEST
    S1_UE_CONTEXT_RELEASE_COMMAND
    S1_UE_CONTEXT_RELEASE_COMPLETE

    ECM Connected

    RRC_RRC_CONNECTION_RECONFIGURATION
    }
    measIdToAddModList[0] {
    measId = 1
    measObjectId = 1
    reportConfigId = 1
    }
    measIdToAddModList[1] {
    measId = 2
    measObjectId = 1
    reportConfigId = 2
    }
    measIdToAddModList[2] {
    measId = 4
    measObjectId = 1
    reportConfigId = 4
    }
    measIdToAddModList[3] {
    measId = 9
    measObjectId = 1
    reportConfigId = 3
    }

    measId and reportConfigId

    RRC_RRC_CONNECTION_RECONFIGURATION
    }
    reportConfigToAddModList[2] {
    reportConfigId = 3
    reportConfig {
    reportConfigEUTRA {
    triggerType {
    periodical {
    purpose = reportStrongestCells
    }
    }
    triggerQuantity = rsrp
    reportQuantity = both

    maxReportCells = 8
    reportInterval = ms5120
    reportAmount = r4
    }

    reportConfigId = 3

    RRC_RRC_CONNECTION_RECONFIGURATION

    Parameters in EA2

    reportConfigToAddModList[3] {
    reportConfigId = 4
    reportConfig {
    reportConfigEUTRA {
    triggerType {
    event {
    eventId {
    eventA2 {
    a2_Threshold {
    threshold_RSRP = 22
    }
    }
    }
    hysteresis = 0
    timeToTrigger = ms256
    }
    }
    triggerQuantity = rsrp

    -118 dBm

    reportQuantity = sameAsTriggerQuantity
    maxReportCells = 8
    reportInterval = min60
    reportAmount = r1

    Ref:

    RRC_MEASUREMENT_REPORT
    TimeStamp: 0.098592
    ID: 1545730
    RRC_MEASUREMENT_REPORT
    UL - DCCH {
    message {
    c1 {
    measurementReport {
    criticalExtensions {
    c1 {
    measurementReport_r8 {
    measResults {
    measId = 9
    measResultPCell {
    rsrpResult = 27
    rsrqResult = 23
    }
    measResultNeighCells {
    measResultListEUTRA[0] {
    physCellId = 295
    measResult {
    rsrpResult = 19
    rsrqResult = 13
    }
    }
    measResultListEUTRA[1] {
    physCellId = 101
    measResult {
    rsrpResult = 17
    rsrqResult = 0
    }

    measId=9
    reportStrongestCells
    -113 dBm

    Above threshold_rsrp
    = -118dBm

    -121 dBm

    -123 dBm

    RRC_MEASUREMENT_REPORT

    measId=4
    reportReconfig 4

    TimeStamp: 3.26554
    ID: 1545730
    RRC_MEASUREMENT_REPORT

    UL - DCCH {
    message {
    c1 {

    Lower than threshold_rsrp


    = -118dBm

    measurementReport {

    criticalExtensions {
    c1 {
    measurementReport_r8 {
    measResults {
    measId = 4

    measResultPCell {
    rsrpResult = 18

    rsrqResult = 8
    }

    -122 dBm

    Real L3 Call Flow Message View


    Start Time:

    2014-11-14 08:00

    Timestamp
    0
    0.003
    0.004
    0.021
    0.023
    0.05
    0.057
    0.058
    0.079
    0.086
    0.087
    0.099
    0.123
    0.146
    3.266
    3.266
    3.267
    3.288
    3.289

    Cell ID
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730
    1545730

    Message
    RRC_RRC_CONNECTION_REQUEST
    INTERNAL_PER_RADIO_UE_MEASUREMENT_TA
    RRC_RRC_CONNECTION_SETUP
    RRC_RRC_CONNECTION_SETUP_COMPLETE
    S1_INITIAL_UE_MESSAGE
    S1_INITIAL_CONTEXT_SETUP_REQUEST
    RRC_SECURITY_MODE_COMMAND
    RRC_RRC_CONNECTION_RECONFIGURATION
    RRC_SECURITY_MODE_COMPLETE
    RRC_RRC_CONNECTION_RECONFIGURATION_COMPLETE
    S1_INITIAL_CONTEXT_SETUP_RESPONSE
    RRC_MEASUREMENT_REPORT
    RRC_RRC_CONNECTION_RECONFIGURATION
    RRC_RRC_CONNECTION_RECONFIGURATION_COMPLETE
    RRC_MEASUREMENT_REPORT
    RRC_RRC_CONNECTION_RELEASE
    S1_UE_CONTEXT_RELEASE_REQUEST
    S1_UE_CONTEXT_RELEASE_COMMAND
    S1_UE_CONTEXT_RELEASE_COMPLETE

    ECM Connected

    Current cell rsrp


    Lower than threshold_rsrp
    = -118dBm

    RRC_CONNECTION_RELEASE
    TimeStamp: 3.26623

    UE Redirection to U900

    ID: 1545730

    RRC_RRC_CONNECTION_RELEASE
    DL - DCCH {
    message {
    c1 {
    rrcConnectionRelease {
    rrc_TransactionIdentifier = 3

    criticalExtensions {
    c1 {
    rrcConnectionRelease_r8 {

    releaseCause = other
    redirectedCarrierInfo {
    utra_FDD = 3086
    }

    1. releaseCause is other
    2. Blind Redirection to 3G,
    3. UTRA, FDD = 3086 (U900)

    Please contact me if following happened


    - There is something wrong in this slides
    - There is some information not allowed to use in this slides

    Thank you

    You might also like