Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    Quick Start NSM 2

    Uploaded by

    Joe Doe
    The document provides instructions to install a Network Shutdown Module in 5 steps: 1. Check that the electrical connection between the UPS and server and network connection between the UPS and Network Management Card are operational. 2. Open UDP and TCP ports 4679 and 4680 in the firewall to enable remote configuration and supervision (not required for Windows Firewall). 3. Execute the Network Shutdown Module software package on a supported operating system under an administrator account. 4. Configure the module by adding the IP or hostname of the Network Management Card, setting the default login and password, and saving. 5. The module can now supervise the UPS state and protected server information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Quick Start NSM 2

    Uploaded by

    Joe Doe
    28 views1 page
    The document provides instructions to install a Network Shutdown Module in 5 steps: 1. Check that the electrical connection between the UPS and server and network connection between the UPS and Network Management Card are operational. 2. Open UDP and TCP ports 4679 and 4680 in the firewall to enable remote configuration and supervision (not required for Windows Firewall). 3. Execute the Network Shutdown Module software package on a supported operating system under an administrator account. 4. Configure the module by adding the IP or hostname of the Network Management Card, setting the default login and password, and saving. 5. The module can now supervise the UPS state and protected server information.

    Original Description:

    nsm

    Original Title

    Quick Start Nsm 2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions to install a Network Shutdown Module in 5 steps: 1. Check that the electrical connection between the UPS and server and network connection between the UPS and Network Management Card are operational. 2. Open UDP and TCP ports 4679 and 4680 in the firewall to enable remote configuration and supervision (not required for Windows Firewall). 3. Execute the Network Shutdown Module software package on a supported operating system under an administrator account. 4. Configure the module by adding the IP or hostname of the Network Management Card, setting the default login and password, and saving. 5. The module can now supervise the UPS state and protected server information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28 views1 page

    Quick Start NSM 2

    Uploaded by

    Joe Doe
    The document provides instructions to install a Network Shutdown Module in 5 steps: 1. Check that the electrical connection between the UPS and server and network connection between the UPS and Network Management Card are operational. 2. Open UDP and TCP ports 4679 and 4680 in the firewall to enable remote configuration and supervision (not required for Windows Firewall). 3. Execute the Network Shutdown Module software package on a supported operating system under an administrator account. 4. Configure the module by adding the IP or hostname of the Network Management Card, setting the default login and password, and saving. 5. The module can now supervise the UPS state and protected server information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    www.eaton.

    com

    Quick Start
    To install the Network Shutdown Module in 5 minutes, please perform the following steps on a machine
    running Windows 2000 / XP / 2003 / 2008 / Vista, Linux or Mac OSX:
    
    Step 1 (Pre-requisites)
    Check that following connections are operational:
    > the electrical connection between the UPS and the server to protect
    > the network connection between the UPS and the Network Management Card (or Proxy).
    Step 2 (Optional)
    To enable the configuration and supervision remote access, Network Shutdown Module needs the
    4679 and 4680 ports (UDP/TCP) to be opened in the Firewall (Automatically opened in the
    Windows Firewall).
    

    Step 3 (Software Installation)


    On a Windows 2000 / XP / 2003 / 2008 / Vista, Linux or Mac OSX machine, execute the Network
    Shutdown Module package under an administrator account.

    Step 4 (Configuration)
    > In the Configuration->Power devices screen,
    Enter the default Login admin and default Password admin
    Then click on the Add button and
    > Enter the IP (or the host name) of the Network Management Card (or Proxy)
    or use the following new function:
    New: With the Quick Scan button, available with version 3.10 and later, you can discover
    in a few seconds the cards connected to the network and then select a card from the list.

    > Save your configuration


    >In the Configuration->Users window configure your password (recommended)
    > For the multi-UPS configurations, please refer to chapter 6
    

    Step 5 (Operation)
    You can now supervise the UPS state and the information concerning the protected server

    Network Shutdown Module V3 - Guide Utilisateur - 34 003 896 XU / AD

    You might also like