Product data sheet

Characteristics

RM4UA31F

voltage measurement relay RM4-U - range

0.05..5 V - 110..130 V AC

Range of product

Zelio Control

Product or component
type

Industrial measurement and control relays

Relay type

Voltage measurement relay

Relay name

RM4U

Relay monitored parameters

Overvoltage or undervoltage detection

Time delay

Adjustable 0.05...30 s

Power consumption in
VA

1.9...3.3 VA AC

Measurement range

0.05...0.5 V voltage AC 50/60 Hz

0.05...0.5 V voltage DC
0.3...3 V voltage AC 50/60 Hz
0.3...3 V voltage DC
0.5...5 V voltage AC 50/60 Hz
0.5...5 V voltage DC

Electrical connection

2 conductors cable 1.5 mm flexible cablewith cable

end conforming to IEC 60947-1
2 conductors cable 2.5 mm flexible cablewithout cable end conforming to IEC 60947-1

Contacts type and composition

2 C/O

Complementary
[Us] rated supply voltage

110...130 V AC 50/60 Hz

Output contacts

2 C/O

Internal input resistance

43000 Ohm
6600 Ohm
71000 Ohm

Permissible continuous overload

20 V
60 V
80 V

Permissible non repetitive overload

100 A for <= 1 s

25 A for <= 1 s
80 A for <= 1 s

Setting accuracy of the switching threshold

+/-5 %

Switching threshold drift

<= 0.06 % per degree centigrade depending permissible ambient air temperature
<= 0.5 % within the supply voltage range (0.85...1.1 Un)

Setting accuracy of time delay

10 P

Time delay drift

<= 0.07 % per degree centigrade depending on the rated operational temperature
<= 0.5 % within the supply voltage range (0.85...1.1 Un)

Hysteresis

5...30 % adjustable of voltage threshold setting

Marking

CE : EMC 89/336/EEC
CE : LVD 73/23/EEC

Overvoltage category

III conforming to IEC 60664-1

[Ui] rated insulation voltage

500 V conforming to IEC

Operating voltage tolerance

0.85...1.1 Uc

Supply frequency

50/60 Hz +/- 5 %

Supply disconnection value

> 0.1 Uc

Operating position

Any position without derating

Tightening torque

0.6...1.1 N.m

Mechanical durability

30000000 cycles

[Ith] conventional free air thermal current

8A

Apr 1, 2012

Downloaded from Elcodis.com electronic components distributor

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.

Main

[Ie] rated operational current

2 A at 24 V DC-13 70 C conforming to IEC 60947-5-1/1991

2 A at 24 V DC-13 70 C conforming to VDE 0660
3 A at 115 V AC-15 70 C conforming to IEC 60947-5-1/1991
3 A at 115 V AC-15 70 C conforming to VDE 0660
3 A at 24 V AC-15 70 C conforming to IEC 60947-5-1/1991
3 A at 24 V AC-15 70 C conforming to VDE 0660
3 A at 250 V AC-15 70 C conforming to IEC 60947-5-1/1991
3 A at 250 V AC-15 70 C conforming to VDE 0660
0.1 A at 250 V DC-13 70 C conforming to IEC 60947-5-1/1991
0.1 A at 250 V DC-13 70 C conforming to VDE 0660
0.3 A at 115 V DC-13 70 C conforming to IEC 60947-5-1/1991
0.3 A at 115 V DC-13 70 C conforming to VDE 0660

Switching capacity in mA

10 mA at 12 V

Switching voltage

<= 440 V AC
250 V AC

Contacts material

90/10 silver nickel contacts

Number of cables

Height

78 mm

Width

22.5 mm

Depth

80 mm

Terminals description ISO n1

(15-16-18)OC
(25-26-28)OC
(A1-A2)CO
(C-B1-B2-B3)CO

Output relay state

Tripped if A measured > A set

9 mm pitches

2.5

Product weight

0.168 kg

Environment
Standards

EN/IEC 60255-6

Product certifications

CSA
GL
UL

Ambient air temperature for storage

-40...85 C

Ambient air temperature for operation

-20...65 C

Relative humidity

15...85 % 3K3 conforming to IEC 60721-3-3

Vibration resistance

0.35 ms (f = 10...55 Hz) conforming to IEC 60068-2-6

Shock resistance

15 gn for 11 ms conforming to IEC 60068-2-27

IP degree of protection

IP20 (terminals) conforming to IEC 60529

IP50 (casing) conforming to IEC 60529

Pollution degree

3 conforming to IEC 60664-1

Dielectric test voltage

2.5 kV

Non-dissipating shock wave

4.8 kV

Resistance to electrostatic discharge

6 kV contact conforming to IEC 61000-4-2 level 3

8 kV air conforming to IEC 61000-4-2 level 3

Resistance to electromagnetic fields

10 V/m conforming to IEC 61000-4-3 level 3

Resistance to fast transients

2 kV conforming to IEC 61000-4-4 level 3

Protection against electric shocks

2 kV conforming to IEC 61000-4-5 level 3

Disturbance radiated/conducted

CISPR11 group 1- class A

CISPR22 - class A

RoHS EUR status

Compliant

RoHS EUR conformity date

0627

2
Downloaded from Elcodis.com
electronic components distributor

Product data sheet

Dimensions Drawings

RM4UA31F

Voltage Measurement Relays

Dimensions

Downloaded from Elcodis.com electronic components distributor

Product data sheet

Mounting and Clearance

Voltage Measurement Relays

Rail mounting

Screw fixing

4
Downloaded from Elcodis.com
electronic components distributor

RM4UA31F

Product data sheet

Connections and Schema

RM4UA31F

Voltage Measurement Relays

RM4UA01 and RM4UA02 Wiring Diagram

A1- Supply voltage

A2
B1, Voltages to be measured (see table below)
B2,
B3, C
Connection and current
values to be measured
RM4UA1

B1-C

0.050.5V

B2-C

0.33V

B3-C

0.55V

RM4UA2

B1-C

B2-C

550V

B3-C

10100V

110V

RM4UA03 Wiring Diagram

A1- Supply voltage

A2
B2, Voltages to be measured (see table below)
B3, C
Connection and current values to be
measured
B2-C

30300V

B3-C

50500V

RM4UA31 and RM4UA32 Wiring Diagram

A1- Supply voltage

A2
B1, Voltages to be measured (see table below)
B2,
B3, C

Downloaded from Elcodis.com electronic components distributor

Connection and current

values to be measured
RM4UA1

B1-C

0.050.5V

B2-C

0.33V

B3-C

0.55V

RM4UA2

B1-C

B2-C

550V

B3-C

10100V

110V

RM4UA33 Wiring Diagram

A1- Supply voltage

A2
B2, Voltages to be measured (see table below)
B3, C
Connection and current values to be
measured
B2-C

30300V

B3-C

50500V

Voltage Measurement Relays

Application Scheme
Example: overspeed monitoring (undervoltage function)

(1)
(2)

Tachogenerator
Overspeed

6
Downloaded from Elcodis.com
electronic components distributor

Product data sheet

Performance Curves

RM4UA31F

Electrical Durability and Load Limit Curves

AC Load
Curve 1: Electrical durability of contacts on resistive load in millions of operating cycles

X
Y

Current broken in A
Millions of operating cycles

Curve 2: Reduction factor k for inductive loads (applies to values taken from durability Curve 1)

X
Y

Power factor on breaking (cos )

Reduction factor K

Example: An LC1-F185 contactor supplied with 115V/50Hz for a consumption of 55VA or a current consumption equal to 0.5A and cos =
0.3.
For 0.5A, curve 1 indicates a durability of approximately 1.5 million operating cycles.
As the load is inductive, it is necessary to apply a reduction coefficient k to this number of cycles as indicated by curve 2.
For cos = 0.3: k = 0.6
The electrical durability therefore becomes:
6

1.5x10 operating cycles x 0.6 = 900000 operating cycles

DC Load
Load limit curve

X
Y
1
2
3

Current in A
Voltage in V
L/R = 20 ms
L/R with load protection diode
Resistive load

Downloaded from Elcodis.com electronic components distributor

Product data sheet

Technical Description

RM4UA31F

Function Diagram
Overvoltage Control
Function >

t
Time delay
U
Supply voltage
A1A2
US1 Setting voltage threshold
US2 Voltage measured
15-18,Output relays connections (refer to Connections and Schema)
15-16;
25-28,
25-26
Relay status: black color = energized.
NOTE: Hysteresis is adjustable between 5 and 30%: for overvoltage h=(US1-US2)/US1. A measuring cycle lasts only 80ms, which
allows rapid detection of changes in current.
NOTE: The measurement ranges can be extended above 500V by adding a resistor. The measurement range on AC supply can be
extended by means of a voltage transformer, the secondary of which is connected to the measuring terminals of the corresponding RM4.

Function Diagram
Undervoltage Control
Function <

t
Time delay
U
Supply voltage
A1A2
US1 Setting voltage threshold
US2 Voltage measured
15-18,Output relays connections (refer to Connections and Schema)
15-16;
25-28,
25-26
Relay status: black color = energized.
NOTE: Hysteresis is adjustable between 5 and 30%: for undervoltage h=(US2-US1)/US1. A measuring cycle lasts only 80ms, which
allows rapid detection of changes in current.
NOTE: The measurement ranges can be extended above 500V by adding a resistor. The measurement range on AC supply can be
extended by means of a voltage transformer, the secondary of which is connected to the measuring terminals of the corresponding RM4.

8
Downloaded from Elcodis.com
electronic components distributor