[ANEXO N1]

Configuracin del IP DSLAM Huawei SmartAX MA5600

Inicio de la Configuracin
[global-config]
<global-config>
traffic table index 7 ip car 3072 priority 6 priority-policy pvc-setting
alarm alarmlevel 0x0e400002 minor
alarm alarmlevel 0x0e400003 minor
undo alarm dy5 alarmid 0x15411000
vdsl line-profile quickadd 2 transmode 1 adapt 2 2 snr 60 0 300 60 0 300 name
VDSL LINE PROFILE 2
vdsl line-profile quickmodify 2 mode-specific enable 1 vdsl-parameter 5 14 u0used transmit-power 145 145
vdsl line-profile quickmodify 2 mode-specific enable 8 vdsl-parameter 5 14 u0used transmit-power 145 145
vdsl line-profile quickadd 3 transmode 1 adapt 2 2 snr 60 0 300 60 0 300 name
VDSL LINE PROFILE 3
vdsl line-template quickadd 2 line 2 channel1 1 100 100 name VDSL LINE
TEMPLATE 2
vlan reserve 4079
#
[device-config]
<device-config>

board add 0/0 SHE

board add 0/2 ADE
board add 0/3 ADE
board add 0/5 VDE
#
[public-config]
<public-config>
system handshake disable
system handshake interval 300
#
[vlan-config]
<vlan-config>
vlan 100 smart
vlan 200 smart
vlan 503 to 504 smart
vlan attrib 100 stacking
vlan attrib 200 stacking
port vlan 100 0/7 2
port vlan 200 0/7 2
port vlan 503 0/7 2

#
#
[scu]
<scu-0/7>
interface scu 0/7
flow-control 0
flow-control 1
flow-control 2
flow-control 3
auto-neg 0 disable
speed 0 100
duplex 0 full
#
[bbs-config]
<bbs-config>
service-port vlan 504 adsl 0/2/48 vpi 0 vci 36 rx-cttr 7 tx-cttr 7
service-port vlan 200 adsl 0/2/48 vpi 0 vci 34 rx-cttr 7 tx-cttr 7
service-port vlan 100 adsl 0/2/48 vpi 0 vci 33 rx-cttr 7 tx-cttr 7
service-port vlan 100 vdsl mode atm 0/5/1 vpi 0 vci 33 rx-cttr 7 tx-cttr 7
service-port vlan 200 vdsl mode atm 0/5/1 vpi 0 vci 34 rx-cttr 7 tx-cttr 7

service-port vlan 504 vdsl mode atm 0/5/1 vpi 0 vci 36 rx-cttr 7 tx-cttr 7
stacking label 0/5/1 vpi 0 vci 33 11
stacking label 0/5/1 vpi 0 vci 34 11
stacking label 0/2/48 vpi 0 vci 33 11
stacking label 0/2/48 vpi 0 vci 34 11
#
[btv-config]
<btv-config>
btv
igmp video-port vpi 0 vci 36
igmp uplink-port 0/7/2 100
igmp program add name canal_1 ip 239.255.0.1 vlan 503 bind 0/7/2 bandwidth 5000
prejoin enable index 0
igmp program add name canal_2 ip 239.255.0.2 vlan 503 bind 0/7/2 bandwidth 5000
prejoin enable index 1
igmp program add name canal_3 ip 239.255.0.3 vlan 503 bind 0/7/2 bandwidth 5000
prejoin enable index 2
igmp program add name canal_4 ip 239.255.0.4 vlan 503 bind 0/7/2 bandwidth 5000
prejoin enable index 3
igmp program add name canal_5 ip 239.255.0.5 vlan 503 bind 0/7/2 bandwidth 5000

prejoin enable index 4

igmp program add name canal_6 ip 239.255.0.6 vlan 503 bind 0/7/2 bandwidth 5000
prejoin enable index 5
igmp program add name canal_7 ip 239.255.0.7 vlan 503 bind 0/7/2 bandwidth 5000
prejoin enable index 6
igmp program add name canal_8 ip 239.255.0.8 vlan 503 bind 0/7/2 bandwidth 5000
prejoin enable index 7
igmp program add name canal_9 ip 239.255.0.9 vlan 503 bind 0/7/2 bandwidth 5000
prejoin enable index 8
igmp program add name canal_10 ip 239.255.0.10 vlan 503 bind 0/7/2 bandwidth
5000 prejoin enable index 9
igmp user add port 0/2/48 adsl 0 36 no-auth
igmp user add port 0/5/1 vdsl 0 36 no-auth
[platform-config]
<platform-config>
clock switch auto
#
[vlanif]
<vlanif503>
interface vlanif503

description Interface BTV uplink hacia Router

ip address 10.99.130.100 255.255.255.0
#
#
<vlanif504>
interface vlanif504
description Interface BTV downlink hacia CPE
ip address 10.99.132.100 255.255.255.0
#
[meth]
<meth0>
interface meth0
description HUAWEI, MA5600 Series, MEth0 Interface
ip address 192.168.1.109 255.255.255.0
#
[null]
<null0>
interface null0
description HUAWEI, MA5600 Series, NULL0 Interface
#

[aaa]
<aaa>
aaa
authentication-scheme default
#
domain default
#
[post-system]
<post-system>
ip route-static 10.99.129.0 255.255.255.0 10.99.132.1
ip route-static 10.99.131.0 255.255.255.0 10.99.130.1
#
snmp-agent community read public
snmp-agent community write private
snmp-agent sys-info version v1 v2c
snmp-agent target-host trap address 192.168.1.110 securityname pr
snmp-agent trap enable standard
snmp-agent trap source MEth0
#
Return

[ANEXO N2]

Configuracin del IP DSLAM Alcatel ISAM 7302

Inicio de la Configuracin
isadmin>configure# configure equipment slot 1/1/1 planned-type aacu-c
isadmin>configure>equipment>slot>1/1/1# exit
isadmin>configure>equipment# slot 1/1/10 planned-type ?
not-planned
unmanaged

! unplan a board
! unmanaged board

aatu-b

! alarm control unit for MTA

aacu-c

! alarm control unit no MTA

eolt-m

! epon hitachi board master

evlt-d

! 24-line VDSL over ISDN

ivps-b

! Isam Voice Packet Server

balt-a

! 48 ISDN Only LT board

eolt-a

! epon hitachi board

eblt-l

! XDSL LT ethernet board ADSL2+ ISDN WESTPORT +

BONDING
vsem-a

! Stand-alone sealed 24-port VDSL module

iwsm-a

! Interworking service module, version-A

eblt-h

! 2x12 Dual slot LT board

eblt-g

! 2x24 Dual slot LT board

eblt-j

! XDSL LT ethernet board ADSL2+ POTS

ivps-a

! Isam Voice Packet Server

polt-a

! 48 Pots Only LT board

evlt-c

! VDSL 24 line board

eblt-f

! XDSL LT ethernet board ADSL2+ ISDN WESTPORT

eblt-e

! XDSL LT ethernet board ADSL2+ POTS WESTPORT

evlt-e

! VDSL 24 line board

evlt-a

! VDSL 24 line board

eblt-d

! XDSL LT ethernet board ADSL2+ ISDN

eblt-c

! XDSL LT ethernet board ADSL2+ POTS

eblt-b

! XDSL LT ethernet board ADSL2+ ISDN

eblt-a

! XDSL LT ethernet board ADSL2+ POTS

ealt-b

! XDSL LT ethernet board ADSL2 ISDN

ealt-a

! XDSL LT ethernet board ADSL2 POTS

rvlt-b

! 24 port VDSL, 4B3T/POTS

rvlt-a

! 24 port VDSL, 2B1Q/POTS

eblt-k

! XDSL LT ethernet board ADSL2+ POTS WESTPORT +

BONDING
aacu-e

! Alarm Control Unit Version E

edse-a

! ARAM-D slave expansion interface card

satu-a

! Alarm control unit with MTA for ARAM-D expansion shelf

genc-e

! ARAM-D expansion card

ecnt-c

! NT termination with integrated NT and LANX, version C

hynt-a

! NT termination with integrated NT and LANX, version B(HY

ecnt-b

! NT termination with integrated NT and LANX, version B

ecnt-a

! NT termination with integrated NT and LANX, version A

ebnt-a

! NT ethernet board optical netw itf

eant-a

! NT ethernet board electrical netw itf

isadmin>configure>equipment# slot 1/1/10 planned-type evlt-c

isadmin>configure>equipment>slot>1/1/10# show equipment slot
==========================================================
slot table
==========================================================
slot

actual-type enabled error-status

availability

-------------------------------------------------------------------------------1/1/1

aacu-c

yes

no-error

available

1/1/2

ecnt-a

yes

no-error

available

1/1/3

empty

no

no-error

not-installed

1/1/4

unknown

1/1/5

empty

1/1/6

eblt-e

1/1/7

empty

no

no-error

not-installed

1/1/8

empty

no

no-error

not-installed

no
no
no

init-boot-failed
no-error
no-planned-board

failed
not-installed
available

1/1/9

empty

no

no-error

not-installed

1/1/10

evlt-c

yes

no-error

available

1/1/11

empty

no

no-error

not-installed

1/1/12

empty

no

no-error

not-installed

1/1/13

empty

no

no-error

not-installed

1/1/14

empty

no

no-error

not-installed

1/1/15

empty

no

no-error

not-installed

1/1/16

empty

no

no-error

not-installed

1/1/17

empty

no

no-error

not-installed

1/1/18

empty

no

no-error

not-installed

1/1/19

empty

no

no-error

not-installed

-------------------------------------------------------------------------------slot count : 19
==========================================================
isadmin>configure>equipment>slot>1/1/10# configure xdsl
isadmin>configure>xdsl# spectrum-profile 1 name VDSL_PoC
isadmin>configure>xdsl>spectrum-profile>1$ local-profile
isadmin>configure>xdsl>spectrum-profile>1$ version 1
isadmin>configure>xdsl>spectrum-profile>1$ dis-ansi-t1413
isadmin>configure>xdsl>spectrum-profile>1$ dis-etsi-dts

isadmin>configure>xdsl>spectrum-profile>1$ dis-g992-1-a
isadmin>configure>xdsl>spectrum-profile>1$ dis-g992-1-b
isadmin>configure>xdsl>spectrum-profile>1$ dis-g992-2-a
isadmin>configure>xdsl>spectrum-profile>1$ dis-g992-3-a
isadmin>configure>xdsl>spectrum-profile>1$ dis-g992-3-b
isadmin>configure>xdsl>spectrum-profile>1$ no g992-3-l1
isadmin>configure>xdsl>spectrum-profile>1$ no g992-3-l2
isadmin>configure>xdsl>spectrum-profile>1$ no g992-3-am
isadmin>configure>xdsl>spectrum-profile>1$ no g992-5-a
isadmin>configure>xdsl>spectrum-profile>1$ no g992-5-b
isadmin>configure>xdsl>spectrum-profile>1$ no ansi-t1.424
isadmin>configure>xdsl>spectrum-profile>1$ dis-etsi-ts

Error : Out of range common PNS value(s)

isadmin>configure>xdsl>spectrum-profile>1$ itu-g993-1
isadmin>configure>xdsl>spectrum-profile>1$ no ieee-802.3ah
isadmin>configure>xdsl>spectrum-profile>1$ no g992-5-am
isadmin>configure>xdsl>spectrum-profile>1$ no g993-2-8a
isadmin>configure>xdsl>spectrum-profile>1$ no g993-2-8b

isadmin>configure>xdsl>spectrum-profile>1$ no g993-2-8c
isadmin>configure>xdsl>spectrum-profile>1$ no g993-2-8d
isadmin>configure>xdsl>spectrum-profile>1$ no g993-2-12a
isadmin>configure>xdsl>spectrum-profile>1$ no g993-2-12b
isadmin>configure>xdsl>spectrum-profile>1$ no g993-2-17a

isadmin>configure>xdsl# spectrum-profile 3 name VDSL_test

isadmin>configure>xdsl>spectrum-profile>3$

70/01/01 01:52:40 major alarm cleared for XDSL lt port 1/1/10/3, near end (servm

isadmin>configure>xdsl>spectrum-profile>3$ dis-etsi-ts
isadmin>configure>xdsl>spectrum-profile>3$ itu-g993-1
isadmin>configure>xdsl>spectrum-profile>3$ no ieee-802.3ah
isadmin>configure>xdsl>spectrum-profile>3$ rf-band-list 00
isadmin>configure>xdsl>spectrum-profile>3$ vdsl
isadmin>configure>xdsl>spectrum-profile>3>vdsl# proprietary-feat
isadmin>configure>xdsl>spectrum-profile>3>vdsl# vdsl-band-plan band-plan-b4
isadmin>configure>xdsl>spectrum-profile>3>vdsl# optional-band up
isadmin>configure>xdsl>spectrum-profile>3>vdsl# adsl-band allow-adsl

isadmin>configure>xdsl>spectrum-profile>3>vdsl# psd-shape-up etsi-p-m2

isadmin>configure>xdsl>spectrum-profile>3>vdsl# no pbo-mode-down
isadmin>configure>xdsl>spectrum-profile>3>vdsl# psd-shape-down ?
cust-psd-down:<...> ! custom psd shape in downstream
ansi-ftt-ex-m1

! ANSI standard spectral density in downstream

ansi-ftt-ex-m2

! ANSI standard spectral density in downstream

ansi-ftt-cab-m1

! ANSI standard spectral density in downstream

ansi-ftt-cab-m2

! ANSI standard spectral density in downstream

etsi-p-ex-p1-m1

! ETSI standard spectral density in downstream

etsi-p-ex-p1-m2

! ETSI standard spectral density in downstream

etsi-p-ex-p2-m1

! ETSI standard spectral density in downstream

etsi-p-ex-p2-m2

! ETSI standard spectral density in downstream

etsi-p-cab-m1

! ETSI standard spectral density in downstream

etsi-p-cab-m2

! ETSI standard spectral density in downstream

ansi-ftt-m1-adsl

! ANSI standard spectral density in downstream

ansi-ftt-m2-adsl

! ANSI standard spectral density in downstream

ansi-ftt-m1-adsl-2plus! ANSI standard spectral density in downstream

ansi-ftt-m2-adsl-2plus! ANSI standard spectral density in downstream
etsi-p-x-m1-adsl

! ETSI standard spectral density in downstream

etsi-p-x-m2-adsl

! ETSI standard spectral density in downstream

etsi-p-m1-adsl-2plus ! ETSI standard spectral density in downstream

etsi-p-m2-adsl-2plus ! ETSI standard spectral density in downstream
isadmin>configure>xdsl>spectrum-profile>3>vdsl# psd-shape-down etsi-p-ex-p2-m2
isadmin>configure>xdsl>spectrum-profile>3>vdsl# exit
isadmin>configure>xdsl>spectrum-profile>3# active

spectrum-profile 3 name VDSL_test

local-profile
version 1
dis-etsi-ts
itu-g993-1
rf-band-list ""
power_mgnt_mode none
vdsl
proprietary-feat
vdsl-band-plan band-plan-b4
optional-band up
adsl-band allow-adsl
pbo-mode-down
max-band unrestricted

max-freq ulimited
m-psd-level-down no-constraint
m-psd-level-up no-constraint
psd-pbo-par-a-up 0f:a0:12:7a:15:18:15:18:15:18
psd-pbo-par-b-up 00:00:07:b9:06:29:04:35:03:af
exit

isadmin>configure>xdsl>line>1/1/10/1# spectrum-profile 3
isadmin>configure>xdsl>line>1/1/10/1# show xdsl operational-data line 1/1/10/1 d
etail
==========================================================
line table (detailed)
==========================================================
-------------------------------------------------------------------------------line
-------------------------------------------------------------------------------if-index : 1/1/10/1

adm-state : admin-up

opr-state/tx-rate-ds : up :29696
tx-rate-us : 39616
max-tx-rate-us : 40960

tx-rate-ds : 29696
max-tx-rate-ds : 28544

inp-up : 6

inp-dn : 18

interl-us : 6

interl-ds : 16

cur-op-mode : itu-g993-1
rinit-1d : 7
==========================================================

[ANEXO N3]

Configuracin Homegateway Huawei EchoLife HG520v

[ANEXO N4]

Protocolo de Pruebas para IP DSLAM Aplicado al

IP DSLAM ZTE FSAP 9800

[ANEXO N5]

Protocolo de Pruebas para Homegateways para VDSLx

(Formato para CANTV)

[ANEXO N6]

Fotos de la realizacin de las pruebas.