Scribd Logo
Upload

Welcome to Scribd!

  • 27 views

    Preassembly and Welding FGD: EIM-POS-02-298

    Uploaded by

    Nector Moyano
    This document is a form for recording preassembly and welding of an FGD (Flue Gas Desulfurization) system. It verifies that key control points were followed, including: 1) Control of component reception, 2) Qualification of welders, 3) Fit-up dimension control, 4) Reinforcement installed before welding, 5) Welding sequence to avoid deformations, and 6) Preheating. It also records welding details such as the WPS used, filler material, drawings, layers welded, welders and dates. The form is for an FGD project at the Guacolda Power Plant Unit 5 and was completed on 8/30/2014.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Preassembly and Welding FGD: EIM-POS-02-298

    Uploaded by

    Nector Moyano
    27 views1 page
    This document is a form for recording preassembly and welding of an FGD (Flue Gas Desulfurization) system. It verifies that key control points were followed, including: 1) Control of component reception, 2) Qualification of welders, 3) Fit-up dimension control, 4) Reinforcement installed before welding, 5) Welding sequence to avoid deformations, and 6) Preheating. It also records welding details such as the WPS used, filler material, drawings, layers welded, welders and dates. The form is for an FGD project at the Guacolda Power Plant Unit 5 and was completed on 8/30/2014.

    Original Title

    Daily Report Silo

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a form for recording preassembly and welding of an FGD (Flue Gas Desulfurization) system. It verifies that key control points were followed, including: 1) Control of component reception, 2) Qualification of welders, 3) Fit-up dimension control, 4) Reinforcement installed before welding, 5) Welding sequence to avoid deformations, and 6) Preheating. It also records welding details such as the WPS used, filler material, drawings, layers welded, welders and dates. The form is for an FGD project at the Guacolda Power Plant Unit 5 and was completed on 8/30/2014.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    27 views1 page

    Preassembly and Welding FGD: EIM-POS-02-298

    Uploaded by

    Nector Moyano
    This document is a form for recording preassembly and welding of an FGD (Flue Gas Desulfurization) system. It verifies that key control points were followed, including: 1) Control of component reception, 2) Qualification of welders, 3) Fit-up dimension control, 4) Reinforcement installed before welding, 5) Welding sequence to avoid deformations, and 6) Preheating. It also records welding details such as the WPS used, filler material, drawings, layers welded, welders and dates. The form is for an FGD project at the Guacolda Power Plant Unit 5 and was completed on 8/30/2014.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 1

    Form

    DATE:
    CONTROL POINTS Yes No N/A Verified by
    Preassembly
    1. Control of components reception
    2. Qualification of welders according to a qualified WPS
    3. Fit-up dimension control
    4. Reinforcement installed before welding
    5. Welding sequence to avoid deformations
    6. Preheating
    Welding of FGD
    REMARKS
    EIMISA Owner : AES GENER
    Jefe de Terreno Client : MITSUBISHI
    Project : Guacolda Power
    Signature Signature Signature Plant Unit 5, Mechanical
    Installation Works
    Name: Name: Name Contract N ::
    Date: Date Date Work Code :
    PREASSEMBLY AND WELDING
    FGD
    Register N
    1
    8/30/2014
    WPS: EI-C-13
    REFERENCE DRAWINGS: Rev.
    PROJECT: YPK-I-210_Guacolda Power Plant Unit 5, Mechanical Installation Works
    EIM-POS-02-298
    AREA: FGD PROCESS: S.M.A.W
    FILLER MATERIAL: E7018 DESCRIPTION :
    WPS
    HLD-10 HOT SIDE 141 E-016 10/8/2011 EI-C-40-233
    Layer Drawings Joint Welder Date mm.
    EI-C-40-233
    HLD-10 HOT SIDE 143 E-016 10/13/2011 EI-C-40-233
    HLD-10 HOT SIDE 142 E-016 10/8/2011
    EI-C-40-233 HLD-10 HOT SIDE 144 E-016 10/13/2011
    EIMISA
    Supervisor
    Jose Luis Candia Boris Arias
    8/30/2014 8/30/2014 298
    MITSUBISHI
    ITO

    You might also like