Scribd Logo
Upload

Welcome to Scribd!

  • 284 views

    How To Connect External Sensors Alarm To Huawei OSN Equipment

    Uploaded by

    Thunder-Link.com
    Did you ever met to access external sensor alarm to transmission equipment like Huawei OSN1500, OSN2500, OSN3500 equipment, now we share some experience to how to connect it.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    How To Connect External Sensors Alarm To Huawei OSN Equipment

    Uploaded by

    Thunder-Link.com
    284 views11 pages
    Did you ever met to access external sensor alarm to transmission equipment like Huawei OSN1500, OSN2500, OSN3500 equipment, now we share some experience to how to connect it.

    Original Title

    How to Connect external sensors alarm to Huawei OSN equipment

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Did you ever met to access external sensor alarm to transmission equipment like Huawei OSN1500, OSN2500, OSN3500 equipment, now we share some experience to how to connect it.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    284 views11 pages

    How To Connect External Sensors Alarm To Huawei OSN Equipment

    Uploaded by

    Thunder-Link.com
    Did you ever met to access external sensor alarm to transmission equipment like Huawei OSN1500, OSN2500, OSN3500 equipment, now we share some experience to how to connect it.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 11

    How to connect door, temperature and power off

    sensors.


    I. Lets show you picture of some sensors:
    1.Temperature sensor view.
    Pic.1a



    2. Door sensor view.
    Pic.2.



    II. Here we take example to show where usually sensors are connected to ALMI1,
    ALMI2, ALMI3 and ALMI4 ports of AUX board of the OSN 3500; you can also add
    ALM port on OSN 1500 and ALMO2 on OSN 2500.





    Each port of alarm input on AUX board of OSN 3500 can use

    Port ALMO2 on OSN2500 is used for alarm input.


    III. Sensors configuration principal.
    Usually sensors are configured on AUX board in OSN3500 and OSN 1500, SAP board
    on OSN 2500.
    Here we take AUX board configuration as example.
    First choose NE where sensors will be connected to.
    Then NE Explorer->AUX->Environment Monitor Interface from Function Tree->Input
    Relay.
    There are 3 sensors on OSN 1500 because of input alarm connection limitation of OSN
    1500.
    Name of alarm can be put in Path Name. For enable sensor Using Status must be change
    from Unused to Used status.


    More important part it is alarm mode configuration.
    There are two alarm generation modes:
    1. An Alarm is Generated if the Relay Turns Off and Low Level is Caused.
    2. An Alarm is Generated if the Relay Turns On and High Level is
    Caused.

    Level of alarm can be set manually through Alarm Severity
    There are 4 levels:
    1. Critical Alarm
    2. Major Alarm
    3. Minor Alarm
    4. Warning Alarm

    You might also like