Scribd Logo
Upload

Welcome to Scribd!

  • 920 views

    ZFB Calculation

    Uploaded by

    mahesh
    The document reports the results of testing REL 511 relays on the Pirana Vasana feeder line on October 16, 2000. It includes parameters of the line and relay settings for Zones I-III and V. It also provides the calculations used to determine fault locations and voltage percentages for different fault types within each zone. Test results are presented to validate the relay settings.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd

    ZFB Calculation

    Uploaded by

    mahesh
    920 views13 pages
    The document reports the results of testing REL 511 relays on the Pirana Vasana feeder line on October 16, 2000. It includes parameters of the line and relay settings for Zones I-III and V. It also provides the calculations used to determine fault locations and voltage percentages for different fault types within each zone. Test results are presented to validate the relay settings.

    Original Description:

    kkm

    Original Title

    Zfb Calculation

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document reports the results of testing REL 511 relays on the Pirana Vasana feeder line on October 16, 2000. It includes parameters of the line and relay settings for Zones I-III and V. It also provides the calculations used to determine fault locations and voltage percentages for different fault types within each zone. Test results are presented to validate the relay settings.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    920 views13 pages

    ZFB Calculation

    Uploaded by

    mahesh
    The document reports the results of testing REL 511 relays on the Pirana Vasana feeder line on October 16, 2000. It includes parameters of the line and relay settings for Zones I-III and V. It also provides the calculations used to determine fault locations and voltage percentages for different fault types within each zone. Test results are presented to validate the relay settings.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 13

    TESTING OF REL 511 RELAYS

    STATION NAME FEEDER NAME DATE OF TESTING PARAMETERS FAULT LOCATOR SETTING 1 2 3 4 5 6 7 LINE LENGTH POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 LINE IMPEDANCE Z LINE ANGLE 4.000 0.610 1.394 1.830 4.182 1.522 66.400 PIRANA VASANA 16.10.2000

    ZFB TEST KIT CALCULATIONS TEST KIT DETAILS Z BOX IS ( R4 X3 ) = CTR = 5 2.366

    FAULT LOCATOR CALCULATION PERCENTAGE OF LINE AT WHICH FAULT IS INJECTED = COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 0.667 80%

    % OF VOLTAGE FOR P-E FAULTS = (1+KN)*Z1*%L*100/(Z BOX * CTR) = 17.1%

    % OF VOLTAGE FOR P-P FAULTS = 2*Z1*%L/(Z BOX * CTR) 20.6%

    FAULT LOCATOR TEST RESULTS

    %V RN YN BN 17.1%

    DIST. EXPT 3.20

    (kM)

    DIST. DISPLAYED (kM)

    RY YB RB 20.6% 3.20

    TESTING OF REL 511 RELAYS


    STATION NAME FEEDER NAME DATE OF TESTING PIRANA VASANA 16.10.2000

    REACTIVE REACH Z1 EXPT R-E Y-E B-E R-Y Y-B B-R 6.7% 7.3% OPTD 23 23 23 21 21 21 13.4% 13.4% EXPT Z2 OPTD 39 39 39 39 39 39 17.9% 17.1% EXPT Z3 OPTD 51 51 51 52 52 52 21.5% 17.9% EXPT Z5 OPTD 19 19 19 23 23 23

    RESISTIVE REACH ZM1(R14 X0) EXPT OPTD R-E Y-E B-E R-Y Y-B B-R 27.9% 27.9% 27.9% 7.8% 43.8% 46.5% 46.5% 11.7% ZM2(R14 X0) EXPT OPTD ZM3(R14 X0) EXPT OPTD ZM5(R3 X0) EXPT OPTD

    LINE ANGLE ZM1(R4 X3) EXPT OPTD ZM2(R4 X3) EXPT OPTD ZM3(R4 X3) EXPT OPTD ZM5(R2 X2) EXPT OPTD

    R-E Y-E B-E R-Y Y-B B-R 13.8% 14.9%

    17 17 17 15 15 15 27.6% 27.6%

    29 29 29 29 29 29 36.8% 35.3%

    37 37 37 38 38 38 10.2% 8.5%

    8 8 8 10 10 10

    TESTING OF REL 511 RELAYS


    STATION NAME FEEDER NAME DATE OF TESTING PARAMETERS LOAD ANGLE = TANGENT = ZONE I SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH RFPP FAULT RESISTANCE PH-E RFPE 0.457 1.045 2.058 4.704 3.000 4.704 66.39997 2.285246 PIRANA VASANA 17.10.2000

    ZONE II SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH RFPP FAULT RESISTANCE PH-E RFPE 0.915 2.091 3.659 8.364 3.000 5.000

    ZONE III SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH FAULT RESISTANCE PH-E 1.220 2.788 4.574 10.454 3.000 5.000

    ZONE V SETTING 1 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 0.122

    2 3 4 5 6

    POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH FAULT RESISTANCE PH-E

    0.279 0.366 0.836 0.836 1.255

    ZFB TEST KIT CALCULATIONS


    REACTIVE REACH Z BOX IS ( X5R0 ) = CTR = 5 ZONE I CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 1.167 6.24

    % OF VOLTAGE FOR P-E FAULTS = (1+KN)*X1*100/(Z BOX * CTR) = 7.3%

    % OF VOLTAGE FOR P-P FAULTS = 2*X1/(Z BOX * CTR) 6.7%

    ZONE II CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 1.000

    % OF VOLTAGE FOR P-E FAULTS = (1+KN)*X1*100/(Z BOX * CTR) = 13.4%

    % OF VOLTAGE FOR P-P FAULTS = 2*X1/(Z BOX * CTR) 13.4% ZONE III CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 0.917

    % OF VOLTAGE FOR P-E FAULTS = (1+KN)*X1*100/(Z BOX * CTR)

    17.1%

    % OF VOLTAGE FOR P-P FAULTS = 2*X1/(Z BOX * CTR) 17.9% ZONE V CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN= Z BOX (R0 X1) = 0.665 0.520

    % OF VOLTAGE FOR P-E FAULTS = (1+KN)*X1*100/(Z BOX * CTR) = 17.9%

    % OF VOLTAGE FOR P-P FAULTS = 2*X1/(Z BOX * CTR) 21.5%

    REACTIVE REACH Z1 EXPT R-E Y-E B-E R-Y Y-B B-R 6.7% 7.3% OPTD 21 21 21 19 19 19 13.4% 13.4% EXPT Z2 OPTD 32 32 32 31 31 31 17.9% 17.1% EXPT Z3 OPTD 49 49 49 52 52 52 21.5% 17.9% EXPT Z5 OPTD 19 19 19 23 23 23

    TESTING OF REL 511 RELAYS STATION NAME FEEDER NAME DATE OF TESTING PARAMETERS ZONE I SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH RFPP FAULT RESISTANCE PH-E RFPE 0.457 1.045 2.058 4.704 3.000 4.704 PIRANA VASANA 17.10.2000

    ZONE II SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH RFPP FAULT RESISTANCE PH-E RFPE 0.915 2.091 3.659 8.364 3.000 5.000

    ZONE III SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH FAULT RESISTANCE PH-E 1.220 2.788 4.574 10.454 3.000 5.000

    ZONE V SETTING 1 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 0.122

    2 3 4 5 6

    POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH FAULT RESISTANCE PH-E

    0.279 0.366 0.836 0.836 1.255

    ZFB TEST KIT CALCULATIONS RESISTIVE REACH Z BOX IS ( X0 R10) = CTR = 5 ZONE I CALCULATION 2.15

    % OF VOLTAGE FOR P-E FAULTS = (1+KN)*RFPE*100/(Z BOX * CTR) = 43.8%

    % OF VOLTAGE FOR P-P FAULTS = 2*RFPP/(Z BOX * CTR) 27.9%

    ZONE II CALCULATION

    % OF VOLTAGE FOR P-E FAULTS = (1+KN)*RFPE*100/(Z BOX * CTR) = 46.5%

    % OF VOLTAGE FOR P-P FAULTS = 2*RFPP/(Z BOX * CTR) 27.9% ZONE III CALCULATION

    % OF VOLTAGE FOR P-E FAULTS = (1+KN)*RFPE*100/(Z BOX * CTR) = 46.5%

    % OF VOLTAGE FOR P-P FAULTS = 2*RFPP/(Z BOX * CTR) 27.9%

    ZONE V CALCULATION ZBOX (X0 R10) = 2.15

    % OF VOLTAGE FOR P-E FAULTS = (1+KN)*RFPE*100/(Z BOX * CTR) = 11.7%

    % OF VOLTAGE FOR P-P FAULTS = 2*RFPP/(Z BOX * CTR) 7.8%

    RESISTIVE REACH ZM1(R10 X0) EXPT OPTD R-E Y-E B-E R-Y Y-B B-R 27.9% 27.9% 27.9% 7.8% 43.8% 46.5% 46.5% 11.7% ZM2(R10 X0) EXPT OPTD ZM3(R10 X0) EXPT OPTD ZM5(R10 X0) EXPT OPTD

    TESTING OF REL 511 RELAYS STATION NAME FEEDER NAME DATE OF TESTING PARAMETERS LOAD ANGLE = TANGENT = ZONE I SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH RFPP FAULT RESISTANCE PH-E RFPE Z 0.457 1.045 2.058 4.704 3.000 4.704 1.141 66.39997 2.285246 PIRANA VASANA 17.10.2000

    ZONE II SETTING POSITIVE SEQUENCE RESISTANCE IN OHMS R1 2 POSITIVE SEQUENCE REACTANCE IN OHMS X1 3 ZERO SEQUENCE RESISTANCE IN OHMS R0 4 ZERO SEQUENCE REACTANCE IN OHMS X0 5 FAULT RESISTANCE PH-PH RFPP 6 FAULT RESISTANCE PH-E RFPE Z ZONE III SETTING POSITIVE SEQUENCE RESISTANCE IN OHMS R1 2 POSITIVE SEQUENCE REACTANCE IN OHMS X1 3 ZERO SEQUENCE RESISTANCE IN OHMS R0 4 ZERO SEQUENCE REACTANCE IN OHMS X0 5 FAULT RESISTANCE PH-PH 6 FAULT RESISTANCE PH-E Z ZONE V SETTING 1 2 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE 1 1 0.915 2.091 3.659 8.364 3.000 5.000 2.282

    1.220 2.788 4.574 10.454 3.000 5.000 3.043

    0.122 0.279

    IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 4 ZERO SEQUENCE REACTANCE IN OHMS X0 5 FAULT RESISTANCE PH-PH 6 FAULT RESISTANCE PH-E Z 7 LINE ANGLE FOR REV. LINE ZFB TEST KIT CALCULATIONS 3 IMPEDANCE REACH Z BOX IS ( X4R5 ) = CTR = 5 ZONE I CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 1.167 3.309

    0.366 0.836 0.836 1.255 0.305 66.41507

    % OF VOLTAGE FOR P-E FAULTS = (1+KN)*Z1*100/(Z BOX * CTR) = 14.9%

    % OF VOLTAGE FOR P-P FAULTS = 2*Z1/(Z BOX * CTR) 13.8%

    ZONE II CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 1.000

    % OF VOLTAGE FOR P-E FAULTS = (1+KN)*Z1*100/(Z BOX * CTR) = 27.6%

    % OF VOLTAGE FOR P-P FAULTS = 2*Z1/(Z BOX * CTR) 27.6% ZONE III CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 0.917

    % OF VOLTAGE FOR P-E FAULTS = (1+KN)*Z1*100/(Z BOX * CTR) = 35.3%

    % OF VOLTAGE FOR P-P FAULTS = 2*Z1/(Z BOX * CTR) 36.8% ZONE V CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN= Z BOX (R2 X2) = 0.665 1.200

    % OF VOLTAGE FOR P-E FAULTS = (1+KN)*Z1*100/(Z BOX * CTR) = 8.5%

    % OF VOLTAGE FOR P-P FAULTS = 2*Z1/(Z BOX * CTR) 10.2%

    REACTIVE REACH ZM1(R4 X3) EXPT OPTD R-E Y-E B-E R-Y Y-B B-R 13.8% 27.6% 36.8% 10.2% 14.9% 21 21 21 27.6% 35.3% 8.5% ZM2(R4 X3) EXPT OPTD ZM3(R4 X3) EXPT OPTD ZM5(R2 X2) EXPT OPTD

    You might also like