Scribd Logo
Upload

Welcome to Scribd!

  • 153 views

    Advanced Redistribution Lab

    Uploaded by

    Zaw Min Htann
    1. Configure EIGRP and OSPF routing protocols on all routers with mutual redistribution between R2 and R3. Specific metrics and tags are assigned to redistributed routes. 2. Filter redistributed routes to prevent looping issues using assigned tags. 3. Ensure the 10.4.4.0/24 network does not get advertised into OSPF. 4. Configure route preferences on routers so the path to 10.1.0.0/24 through R3 is preferred over the path through R2.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Advanced Redistribution Lab

    Uploaded by

    Zaw Min Htann
    153 views1 page
    1. Configure EIGRP and OSPF routing protocols on all routers with mutual redistribution between R2 and R3. Specific metrics and tags are assigned to redistributed routes. 2. Filter redistributed routes to prevent looping issues using assigned tags. 3. Ensure the 10.4.4.0/24 network does not get advertised into OSPF. 4. Configure route preferences on routers so the path to 10.1.0.0/24 through R3 is preferred over the path through R2.

    Original Description:

    CCNP 640

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. Configure EIGRP and OSPF routing protocols on all routers with mutual redistribution between R2 and R3. Specific metrics and tags are assigned to redistributed routes. 2. Filter redistributed routes to prevent looping issues using assigned tags. 3. Ensure the 10.4.4.0/24 network does not get advertised into OSPF. 4. Configure route preferences on routers so the path to 10.1.0.0/24 through R3 is preferred over the path through R2.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    153 views1 page

    Advanced Redistribution Lab

    Uploaded by

    Zaw Min Htann
    1. Configure EIGRP and OSPF routing protocols on all routers with mutual redistribution between R2 and R3. Specific metrics and tags are assigned to redistributed routes. 2. Filter redistributed routes to prevent looping issues using assigned tags. 3. Ensure the 10.4.4.0/24 network does not get advertised into OSPF. 4. Configure route preferences on routers so the path to 10.1.0.0/24 through R3 is preferred over the path through R2.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Advanced Redistribution Lab

    Objectives:
    1. Configure EIGRP and OSPF for the network shown (use OSPF Area 0). Advertise all networks on all routers. Do not implement any summarization features for EIGRP or OSPF. Routes should never be advertised in both OSPF and EIGRP routing domains. 2. Enable full, mutual redistribution on R2 and R3 between OSPF and EIGRP. The 10.4.0.0/24 and 10.4.1.0/24 subnets should have a seed metric of 100 and an OSPF tag of 10 while the 10.4.2.0/24 and 10.4.3.0/24 subnets should have a seed metric of 200 and an OSPF tag of 20. All other subnets redistributed into OSPF should have a seed metric of 300 and an OSPF tag of 30. OSPF routes redistributed into EIGRP should have a seed metric of BW: 400 DLY: 20 REL: 255 LD: 1 MTU: 1500 and a tag of 40. Finally, external OSPF routes should not increment their metric as they pass through the OSPF domain. 3. Ensure the 10.4.4.0/24 network does not reach the OSPF routing domain. 4. Enable filtering using the assigned route tags to ensure redistributed routes do not cause any looping issues. 5. R3 has the preferred route to reach the 10.1.0.0/24 network. Ensure routers prefer this path over the path from R2.

    You might also like