K-Stage Access Scaffold

Download as pdf or txt
Download as pdf or txt
You are on page 1of 9

K-Stage Access Scaffold

K-Stage Access Scaffold


K-Stage Access Scaffold
K-STAGE is a modular system scaffold with wedge fixing for all access scaffold requirements. The wedge fixing of the ledgers and transoms gives a simple and fast means of erecting access scaffolding without loose parts. Rigid 4 way fixing gives a positive location without movement. Spigot and wedge fitting on the standard to give guaranteed vertical alignment. Quality primed & painted or hot dipped galvanised finish for maintenance free use. Conforms to BS1139 Part 5, HD 1000, OSHA, Australian, New Zealand Standards.

K-Stage Access Scaffold


K-Stage Access Scaffold Components Hop Up Bracket
To extend the scaffold by cantilevering for an additional 1, 2 or 3 board platform.

Description 1 Board Hop Up Bracket 2 Board Hop Up Bracket 3 Board Hop Up Bracket

Weight (kg) 2.3 5.8 9.5

Toe Board Bracket


Clamps to the standard with a captive wedge to hold the batten toe board vertically in place. Description Toe Board Bracket Weight (kg) 0.78

End Toe Board Bracket


Fits into 'V' locating lugs on the standard at the end of a platform to hold the end batten toe board vertically in place. Description End Toe Board Bracket Weight (kg) 1.18

Tie Bar
For connecting the access brackets along the length of the platform. This ensures correct spacing so that the battens are not dislodged. Description 8'0" Tie Bar 6'0" Tie Bar 4'2" Tie Bar Weight (kg) 7.0 5.2 3.5

Batten
The steel platform batten spans between the transoms giving a non-slip level surface. Description 8'0" Steel Batten 6'0" Steel Batten 4'2" Steel Batten Weight (kg) 14.8 12.8 10.9

K-Stage Access Scaffold

K-Stage Access Scaffold Components Batten Clamp


To secure battens in high wind conditions.

Description Batten Clamp

Weight (kg) 3.25

Internal Corner Filler


For use with two and three board stage bracket, to fill the gap at internal corners. Description 3' x 3' Corner Filler 3' x 5' Corner Filler Weight (kg) 11.2 15.1

Bridging Ledger 16'0"


Made from standard tube to span between two 8' bays to give clear access or to avoid obstructions. Description 16'0" Bridging Ledger Weight (kg) 32.0

Bridging Ledger 24'0"


Made from standard tube to span between three 8' bays to give clear access or to avoid obstructions. Description 24'0" Bridging Ledger Weight (kg) 57.0

K-Stage Access Scaffold


K-Stage Access Scaffold Components Return Transom
Fixed to the inner and outer standard and placed over the first ledger of an adjacent 90 bay. Seating on one side for 3 or 5 numbers of steel or timber battens giving the same level decking on both scaffold runs.

Description 4'2" Return Transom 2'8" Return Transom 2'6" Return Transom

Weight (kg) 13.4 8.8 8.4

Diagonal Brace
The diagonal brace is used to the full height of the scaffolding in a longitudinal direction. Description 12'0" (8' x 8'1 1/2" Bay) 9'0" (6' x 6'6" Bay) 6'0" (4'2" x 4'10 1/2" Bay) 8' x 6'6" Bay Other sizes are available on request. Weight (kg) 13.4 10.6 8.0 11.9

Coupler Brace
The coupler brace is used when necessary across the scaffold. Description 8' x 6'6" Bay 6' x 6'6" Bay Other sizes are available on request. Weight (kg) 12.1 10.7

Stage Bracket
To extend the scaffold by cantilevering for an additional 1,2 or 3 board platform. Description 1 Board Stage Bracket 2 Board Stage Bracket 3 Board Stage Bracket Weight (kg) 2.3 5.8 9.5

K-Stage Access Scaffold


K-Stage Access Scaffold Components Standards
The standard is the vertical member of the scaffold with a spigot (either round or box type) at one end for accurate alignment. A series of 'V' locating lugs are welded on the tube for the attachment of ledgers, transoms, and auxiliary components. Open ended standards and loose spigots are also available. Description 9'9" Standard 8'1.5" Standard 6'6" Standard 4'10.5" Standard 3'3" Standard 1'7.5" Standard Weight (kg) 17.4 15.0 12.3 9.4 6.4 3.6

Ledgers
The ledger is used to connect the standard in a longitudinal direction. It is made from scaffold tube with wedge 'Banana Type' fixing at each end which fits in the 'V' locating lugs on the standard. The ledger is also used as a guardrail. Description 8'0" Ledger 6'0" Ledger 4'2" Ledger 2'8" Ledger 2'6"Ledger Weight (kg) 11.0 8.3 5.9 3.9 3.7

Transom
Transom is either made of back-to-back anglev or T-shaped profile with the same fixing device on each end as the ledger. They are used to carry 3 or 5 numbers of steel or trimber battens and toeboard.

Description 4'2" Transom 2'8" Transom 2'6" Transom

Weight (kg) 9.6 5.9 5.5

K-Stage Access Scaffold


K-Stage Access Scaffold Components Flat Bar Transom
Description 8'0" Flat Bar Transom 6'0" Flat Bar Transom Weight (kg) 23.5 14.0

Bow String Transom


Description 8'0" Bow String Transom Weight (kg) 21.5

Loading Bay Transom


Description 8'0" Loading Bay Transom Weight (kg) 27.8

Ladder Access Transom Used to secure the ladder to the system


Description 6'0" Ladder Access Transom 4'2" Ladder Access Transom Weight (kg) 13.0 9.2

K-Stage Access System


Ladder Access Ladder
Three different sizes of ladder are available which can be connected to obtain any length.

Description 3.0m Ladder 1.5m Ladder 1.0m Ladder

Weight (kg) 24.0 12.6 8.9

Ladder Access Transom


Used to secure the ladder to the system. Description 6'0" Ladder Access Transom 4'2" Ladder Access Transom Weight (kg) 13.0 9.2

Stair Access
Description Stair Case (8' x 6'6") Outer Hand Rail Inner Hand Rail Weight (kg) 33 14 11

Outer Handrail

Inner Handrail

Stair Case

Head Office:
New Industrial Area P.O.Box: 2701, Ajman-U.A.E Tel: +971-6-7439013, Fax: +971-6-7439017 E-mail: [email protected], Website: www.khk-scaffolding.com

A-Val Metal Resources, Inc. 5925, Airport Road, Suite 200, Airway Centre, Mississauga L4V 1W1, Ontario, Canada Tel.: 001 905 405 6245, Fax: 001 905 672 8630 email : [email protected] or [email protected] Brisko Scaffolding Limited 120 South lane New Malden Surrey KT3 SEL England Tel.: 0044 - 20 - 83364595 Fax: 0044 - 20 - 83364596

Branches :

Prime Metal CORPORATION - USA 653 Route 52, Walden NY 12586 United States of America Tel.: 001 - 845 - 778 4545 Fax: 001 - 845 - 778 4218 Winston Scaffolding Pty Ltd. 44-46 Gould Street South Strathfield, N.S.W. 2136 Tel.: 00 - 02 - 97588700 Fax: 00 - 02 - 97587263

You might also like