Scribd Logo
Upload

Welcome to Scribd!

  • 5 views

    Synopsis

    Uploaded by

    Aakash Sheelvant
    The aim of the project work is to protect induction motors from overloading, overheating and high input voltages using sensors and a microcontroller to monitor parameters and de-energize the motor if thresholds are exceeded. Sensors measure current, voltage and temperature and feed data to an ADC and microcontroller for comparison to stored values.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd

    Synopsis

    Uploaded by

    Aakash Sheelvant
    5 views2 pages
    The aim of the project work is to protect induction motors from overloading, overheating and high input voltages using sensors and a microcontroller to monitor parameters and de-energize the motor if thresholds are exceeded. Sensors measure current, voltage and temperature and feed data to an ADC and microcontroller for comparison to stored values.

    Original Description:

    report

    Original Title

    synopsis

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The aim of the project work is to protect induction motors from overloading, overheating and high input voltages using sensors and a microcontroller to monitor parameters and de-energize the motor if thresholds are exceeded. Sensors measure current, voltage and temperature and feed data to an ADC and microcontroller for comparison to stored values.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    5 views2 pages

    Synopsis

    Uploaded by

    Aakash Sheelvant
    The aim of the project work is to protect induction motors from overloading, overheating and high input voltages using sensors and a microcontroller to monitor parameters and de-energize the motor if thresholds are exceeded. Sensors measure current, voltage and temperature and feed data to an ADC and microcontroller for comparison to stored values.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Brief Working:

    The aim of the project work is to protect the Induction motor burning due to the overload, over temperature and input high voltage. Normally most of the Induction motor are burning because of these three reasons; hence by incorporating this type of monitoring and control circuits, life of the Induction motor can be increased.

    The transducers used in this project work is for monitoring the various parameters are, a) CT (Current transformer) is used for measuring the load current at transformer secondary. b) PT (potential transmitter) for measuring the line voltage at transformer primary. c) SL100 (semiconductor) is used as a temperature sensor for measuring the transformer body temperature or oil temperature. All sensor output is connected to ADC input to convert digital data, and then fed to microcontroller, and compares the data with stored value.

    The micro-controller used in this project work is INTEL/ATMEL 89C51 chip, which functions according to the program written and stored in it. The program is made in assembly language. The information received through the A/D converter can be stored and facilitates the display of failure parameters. The output of the microcontroller through the latch is used to drive the motor, which de-energizes automatically, whenever the parameters acceded above set value.

    APPLICATIONS:1. Industrial Applications

    ADVANTAGES
    2. Monitoring of an IM is a fast emerging technology for the detection of initial faults. 3. It avoids unexpected failure of an industrial process. 4. Power saving.

    EXISTING SYSTEM:
    IMs can be protected using some components, such as timers, contactors, voltage, and current relays. This method is known as the classical method that is very basic and involves mechanical dynamic parts. Computer and programmable integrated circuit (PIC) based protection methods have eliminated most of the mechanical components.

    You might also like