Wilson Construction Company’s Post

Expansion joint for cable trays &trunks by two methods:  1- using expansion splice plate. 2- making gap with 2cm aligned with structural expansion joint for building . #Electrical

Electrical Steel Pole Power poles are pole-shaped or lattice structures that support overhead power transmission lines and overhead ground wires, maintaining a specific distance between them and the ground. Lattice structures are the most commonly used and are the primary structures for ultra-high voltage power lines. They can be categorized as self-supporting towers and guyed towers, with grounding methods including horizontal extension grounding and deep-buried grounding electrodes. https://lnkd.in/gA8kGUkz

"Retrofit Insulated Cross Arm (RICA) is an arrangement of electrical insulators which have been retrofitted to an existing 275kV tower, allowing it to operate at 400kV without having to build an entirely new route. This is done by replacing the steel cross arms and suspended vertical insulators with an Insulating Cross Arm (ICA). As the conductors attach directly to the cross-arm, the electrical clearances are improved"

Bending Radius of Cable: A Critical Factor in Cable Installation The bending radius of a cable is the minimum radius a cable can be bent without damaging its internal components or compromising its performance. It is a critical factor in cable installation, as exceeding the recommended bending radius can lead to: - Damage to insulation and conductors - Increased electrical resistance - Reduced cable lifespan - Poor signal quality or transmission errors Factors Affecting Bending Radius: - Cable material and construction - Conductor size and type - Insulation thickness and material - Shielding and armor Best Practices: - Always consult the manufacturer's recommendations - Use appropriate cable supports and guides - Avoid sharp bends and kinks - Use cable flexing and bindings. Understanding and respecting the bending radius of cables is crucial for reliable and long-lasting cable installations. By considering the factors, types, and calculations involved, and following best practices, you can ensure optimal cable performance and extend its lifespan. #cable #PowerSystems #projects #installation

WATER PROOF ISOLATOR The switch allows for?on?and?off?switching while under load. It features a padlock that can be used with a?7mm hole?in the?off?position. The switch has dual?25mm threaded conduits?to protect against heavy dust and water ingress. specification Number of poles: 2p (35amp) Rated frequency:50/60hz IP?protection: IP66 Operation mode: on none off Contact type: normally closed Connector type:clamp FEATURES: Ideally suited for new construction and refurbishment projects Surface Mount Isolator Water and dust proof products 20 & 25mm conduit entries Available in Single, double and triple poles IMPORTANTS: When installing cover ensure both operating lever and internal switch toggle are aligned in ‘ off ‘ Position to give correct ‘ on ‘ ‘ off ‘ indication #are#al#ramiz #WaterProofIsolator #SwitchUnderLoad #PadlockSwitch #7mmHole #DualThreadedConduits #DustProof #WaterProof #2P35Amp #5060Hz #IP66Protection #NormallyClosed #ClampConnector #NewConstruction #RefurbishmentProjects #SurfaceMount #ConduitEntries #SingleDoubleTriplePoles #HeavyDutySwitch #OnOffSwitch #InstallationInstructions

*"How Rod Gap Arresters Shield Your Electrical System from High Voltage Surges"* Like ❤️ comments ✍️ save 💡 share 💥 A rod gap arrester is designed with two metal rods separated by an air gap. One rod is connected to the power line, and the other to the ground. Under normal conditions, the air gap remains non-conductive. During a high voltage surge, the air in the gap ionizes, creating a low-resistance path. This allows the surge to bypass sensitive equipment and dissipate safely into the ground, protecting the electrical system from damage. The rod gap arrester operates on the principle of a spark gap, where the ionized air forms a conductive path for the surge. Follow @ohmengineeringworks All Rights Reserved to @ohmengineeringworks #electricalwire #electricaljobs #electricalrepair #electricalparadedreamlights #electricalproject #electricaltechnology #electrical_phenomenon #electrical_engineer #electricalmaintenance #electricaltesting #electricalshop #electricalengg #electricalinstallations #electricalconstruction #earthing #electricalinstallation #electricalapprentice #electricalpanel #electricalengineeringstudent #electricalstorm #electricaltools #insulators #electricalfails #electricaltips #electricals #electricalporn #karthikeyansj #ohmengineeringworks

*"How Rod Gap Arresters Shield Your Electrical System from High Voltage Surges"* Like ❤️ comments ✍️ save 💡 share 💥 A rod gap arrester is designed with two metal rods separated by an air gap. One rod is connected to the power line, and the other to the ground. Under normal conditions, the air gap remains non-conductive. During a high voltage surge, the air in the gap ionizes, creating a low-resistance path. This allows the surge to bypass sensitive equipment and dissipate safely into the ground, protecting the electrical system from damage. The rod gap arrester operates on the principle of a spark gap, where the ionized air forms a conductive path for the surge. Follow @ohmengineeringworks All Rights Reserved to @ohmengineeringworks #electricalwire #electricaljobs #electricalrepair #electricalparadedreamlights #electricalproject #electricaltechnology #electrical_phenomenon #electrical_engineer #electricalmaintenance #electricaltesting #electricalshop #electricalengg #electricalinstallations #electricalconstruction #earthing #electricalinstallation #electricalapprentice #electricalpanel #electricalengineeringstudent #electricalstorm #electricaltools #insulators #electricalfails #electricaltips #electricals #electricalporn #karthikeyansj #ohmengineeringworks

Kinetics V.LOCK Seismic Cable Restraint Connector sets the standard in seismic safety. This innovative connector simplifies the suspension of essential services, making installation quicker and more cost-effective. Key features include: 🔹Versatile Applications: Secures cables for seismic restraint of piping, ductwork, electrical cable trays, and suspended equipment. 🔹Reliable Performance: Designed to bear tension-only loads, ensuring effective restraint across both primary axes. 🔹Code-Compliant: Meets building code requirements with engineer-specified spacing, critical for isolated systems where rigid struts may fail. 🔗 Product Details: https://hubs.ly/Q02SS9Zv0 📄 Data Sheet: https://hubs.ly/Q02SSbDn0 #seismic #safety #connector #seismicrestraint

Cathodic Protection Cable Conductor Material: Copper. Feature: High resistant to water intrusion,excellent dielectric and tensile strength. Application: Cathodic Protection. INTRODUCTION: Ⅰ、Cathodic protection cables must be highly corrosion resistant and able to withstand the rigours of the environment they are exposed to. Ⅱ、Direct burial DC cables for cathodic protection applications, such as anode leads, splice cables, structural connections, test leads, etc. These can also be used for underwater installations in tanks, offshore structures and other similar applications. It is usually a stranded conductor insulated with HMWPE. cables in many different sizes and types to provide the reliable results you need. Ⅲ、TYPES: XLPE/PVC、HMWPE、PVDF/HMWPE、HALAR / HMWPE、PVDF/HMWPE、HMWPE/KYNAR、 HALAR / HMWPE etc. #cathodicprotection #cathodicprotectioncable #XLPE #PVC #HMWPE #PVDF #KYNAR

📢 MTSA: The perfect solution for underground networks MTSA insulated shear head bolt #connectors are the best solution for splicing and connecting aluminum cables of diferent sections in electrical installations, especially in low voltage (LV) underground networks. The insulated fuse connectors allow for a simple and reliable installation, ensuring a long-lasting connection, essential for maintaining the integrity and eficiency of electrical networks. 🔐 ✅ Advantages of using MTSA insulated shear head bolt connectors: 👉 Safety: Fuse screws provide a firm and secure connection, minimizing the risk of electrical failures ❌. The insulating cover and sealing gaskets at the ends protect against moisture and other environmental elements, enhancing the safety of the connection. 👉 Easy Installation: Installation with fuse screws is simple and quick, requiring no special tools or advanced skills. Shear head bolt ensure the correct torque is applied, preventing over-tightening or loose connections. 👉 High Conductivity: Made from high-conductivity aluminum (purity equal to or greater than 99.5%), these connectors ensure excellent electrical transmission. 👉 Durability and Resistance: The high-strength aluminum alloy and elastomer casing ensure the sleeve can withstand adverse conditions and hostile environments, both indoors and outdoors. ✅ Regulatory Compliance: Manufactured according to UNE 211022 standard and certified by AENOR. 👉 Versatility: Suitable for various applications in low voltage underground networks, usable with cable sections ranging from 25mm² to 240mm². For more information about this product, check the link: https://lnkd.in/dbC4RF5M #Sofamel #MTSA #ElectricalConnections #Safety #UndergroundNetworks #Innovation #Quality