Sealenic’s Post

🛠️ Learn fault-finding like a pro! Watch this insightful video on using the Schematic tool for mobile hardware solutions💡become a master troubleshooter today!📱Click the link Below #MobileRepairing #learnto #GadgetRepair #faultfinding #Borneo #Schematics #diagram #mobilephones #fault 👉

This series of short videos provides a comprehensive overview of XFdtd's schematic editor, including optimization of component values, impedance and aperture tuners with tune codes, and system efficiency results.

In this Question Line video, Jason explains the difference between locating features using GD&T and doing so with traditional coordinate dimensions, walking through two example drawings to show when to use GD&T and the benefits of it over traditional coordinate dimensions. https://hubs.la/Q02T5jNN0

In this Question Line video, Jason explains the difference between locating features using GD&T and doing so with traditional coordinate dimensions, walking through two example drawings to show when to use GD&T and the benefits of it over traditional coordinate dimensions. https://hubs.la/Q02T5jNM0

In this Question Line video, Jason explains the difference between locating features using GD&T and doing so with traditional coordinate dimensions, walking through two example drawings to show when to use GD&T and the benefits of it over traditional coordinate dimensions. https://hubs.la/Q02T5hcR0

“I agree But why we can not express these functions in the model? It is only a matter of time.” Of course we can, but not without doing it. Some equipment is needed. See V2.0 and V3.0 here: https://tangerinefocus.com https://lnkd.in/dHGxBrej The functions of drawing: 1. Expression of visual close study (V.C.S.), sustained articulate expression of the act of narrowed attentive focus within the wider expansive environment of a project’s model (mental, physical, and digital models) 2. Physical Evaluation, of the model at V.C.S. locations, primarily a check against omission of physical items, and development of good fit among the physical items present. 3. Affirmation of (2. Physical Evaluation) 4. Building The Engine of Thought, an interplay between two poles: wide and narrow, environment and focused close study. In the interplay, thought happens and understanding grows. With either of the two poles absent or diminished, the engine shuts down, or evaporates along with thinking itself and understanding, which fails to develop. 5. The courtesy of drawing attention to things not to be missed, in the model. This is the function of technical drawing. 5 functions that is, all at once.

Hello, Motor Fans: In this blog I provide an overview of using the Motor-CAD Emag module to model the electromagnetics of a motor and I use an Interior Permanent Magnet (IPM) motor as an example. The link to the blog associated to this video is in the description. Like and subscribe if you enjoy this content. https://lnkd.in/eN6EuA79

Are you interested in learning more about microscope objectives? Our foundational knowledge article on objective specifications provides an in-depth look at the information inscribed on the barrel of each objective, including magnification, numerical aperture, and more. Learn how to choose the right objective for your needs. https://lnkd.in/duFvK2jU

Putting the new Calcpad in action: I am now building a small program for analysis of plane frames with finite elements. One very good option is that functions can return matrices as result. In this case, I use a single function t(e) to assemble all elements transformation matrices. Later I will do the same with stiffness matrices, but I will post it when ready.

Realtime Hysteresis Current Control of PMSM with SCIAMBLE Workbench: A Model-Based Design Approach https://lnkd.in/gePNTsYp