Lifestyle For Environment / Bharat Amrutkal Trust’s Post

https://lnkd.in/gGw3Hq7K 28 {{ “2024-11-28T00:00:00+00:00” | date “MMM” }} ’24 Written on {{ “2024-11-28T00:00:00+00:00” | date “longDate” }} Changed to {{ “2024-11-28T00:00:00+00:00” | date “longDate” }} Conrad News <!-- Conrad: Säker kabeldragning med ett "klick" --> Faster, easier and safer – Weidmüller presents innovative SNAP IN connection technology for future-oriented control cabinet construction. As quick as a snap of the fingers: Weidmüller’s new SNAP IN connection technology enables super-fast cable routing for installation and maintenance work. No crimping is needed and the intuitive handling saves both time and material. In short, SNAP IN has the future-oriented and sustainable technology that many other Weidmüller products on the Conrad Sourcing Platform are also equipped with. Crimping is not requiredThe big advantage of the new technology: With a simple click, the connector attaches to the stripped conductor and everything is ready. Connecting to the control cabinet has never been faster. A technical innovation that not only makes material-intensive crimping unnecessary. Easier and saferAnother plus point: No lengthy user training is required, as everything is so simple and easy to understand. Just put the stripped conductor in place and make a secure connection with one click! The same applies in other directions: you can also remove a connection with a quick press. The new technology from Weidmüller saves materials, time and above all costs. Future-oriented thanks to Ready-to-RobotWeidmüller also scores plus points with Ready-to-Robot technology, which for the first time is fully automatic wiring with the help of industrial robots. The conductor is put in place with minimal force and no special tools are needed. The robot’s short learning time is advantageous for new tasks: thanks to SNAP IN, only minimal adjustments need to be made to the system. Connections of terminal blocks and connectors by hand and with special tools are now a thing of the past. Procure innovative products easily and conveniently“We are pleased to now be able to offer a variety of clamps, connectors and inserts that work with the innovative and automatable cable routing option,” said Manuel Gschwend, Senior Expert Product Management at Conrad Electronic. Dr. Christian Dülme, Regional Director DACH, adds: “What we particularly appreciate about the partnership with Conrad is the rapid implementation of new products. We have also received positive feedback on the integration of the electronic Conrad catalogs into the purchasing systems of our joint industrial customers.” Here you will find a selection of Weidmüller products with SNAP IN technology. www.conrad.com More information… Facebook Chirp LinkedIn Pinterest <a href="https://lnkd.in/gRRTcSGY">Source link </a>

https://lnkd.in/gGw3Hq7K 28 {{ “2024-11-28T00:00:00+00:00” | date “MMM” }} ’24 Written on {{ “2024-11-28T00:00:00+00:00” | date “longDate” }} Changed to {{ “2024-11-28T00:00:00+00:00” | date “longDate” }} Conrad News <!-- Conrad: Säker kabeldragning med ett "klick" --> Faster, easier and safer – Weidmüller presents innovative SNAP IN connection technology for future-oriented control cabinet construction. As quick as a snap of the fingers: Weidmüller’s new SNAP IN connection technology enables super-fast cable routing for installation and maintenance work. No crimping is needed and the intuitive handling saves both time and material. In short, SNAP IN has the future-oriented and sustainable technology that many other Weidmüller products on the Conrad Sourcing Platform are also equipped with. Crimping is not requiredThe big advantage of the new technology: With a simple click, the connector attaches to the stripped conductor and everything is ready. Connecting to the control cabinet has never been faster. A technical innovation that not only makes material-intensive crimping unnecessary. Easier and saferAnother plus point: No lengthy user training is required, as everything is so simple and easy to understand. Just put the stripped conductor in place and make a secure connection with one click! The same applies in other directions: you can also remove a connection with a quick press. The new technology from Weidmüller saves materials, time and above all costs. Future-oriented thanks to Ready-to-RobotWeidmüller also scores plus points with Ready-to-Robot technology, which for the first time is fully automatic wiring with the help of industrial robots. The conductor is put in place with minimal force and no special tools are needed. The robot’s short learning time is advantageous for new tasks: thanks to SNAP IN, only minimal adjustments need to be made to the system. Connections of terminal blocks and connectors by hand and with special tools are now a thing of the past. Procure innovative products easily and conveniently“We are pleased to now be able to offer a variety of clamps, connectors and inserts that work with the innovative and automatable cable routing option,” said Manuel Gschwend, Senior Expert Product Management at Conrad Electronic. Dr. Christian Dülme, Regional Director DACH, adds: “What we particularly appreciate about the partnership with Conrad is the rapid implementation of new products. We have also received positive feedback on the integration of the electronic Conrad catalogs into the purchasing systems of our joint industrial customers.” Here you will find a selection of Weidmüller products with SNAP IN technology. www.conrad.com More information… Facebook Chirp LinkedIn Pinterest <a href="https://lnkd.in/gRRTcSGY">Source link </a>

There are multiple methods for mapping inputs and outputs to an #IndustrialRobot. In this article, we cover two of the most popular methods: letting the robot or the #PLC control the I/O signals. https://bit.ly/3QmZLPv

A proportional–integral–derivative controller ( three-term controller) is a control loop mechanism employing feedback that is widely used in industrial control systems and a variety of other applications requiring continuously modulated control. A PID controller continuously calculates an error value e(t)} as the difference between a desired setpoint (SP) and a measured process variable (PV) and applies a correction based on proportional, integral, and derivative terms (denoted P, I,and D), hence the name. PID systems automatically apply accurate and responsive correction to a control function. An everyday example is the cruise control on a car, where ascending a hill would lower speed if constant engine power were applied. The PID algorithm restores the measured speed to the desired speed with minimal delay and overshoot by increasing the power output of the engine in a controlled manner. The first theoretical analysis and practical application of PID was in the field of automatic steering systems for ships. It was then used for automatic process control in the manufacturing industry, where it was widely implemented in pneumatic and then electronic controllers. Today the PID concept is used universally in applications requiring accurate and optimized automatic control. force). Control damping In the interest of achieving a controlled arrival at the desired position (SP) in a timely and accurate way, the controlled system needs to be critically damped. A well-tuned position control system will also apply the necessary currents to the controlled motor so that the arm pushes and pulls as necessary to resist external forces trying to move it away from the required position. The setpoint itself may be generated by an external system, such as a PLC or other computer system, so that it continuously varies depending on the work that the robotic arm is expected to do. A well-tuned PID control system will enable the arm to meet these changing requirements to the best of its capabilities. Response to disturbances If a controller starts from a stable state with zero error (PV = SP), then further changes by the controller will be in response to changes in other measured or unmeasured inputs to the process that affect the process, and hence the PV. Variables that affect the process other than the MV are known as disturbances. Generally, controllers are used to reject disturbances and to implement setpoint changes. A change in load on the arm constitutes a disturbance to the robot arm control process Applications In theory, a controller can be used to control any process that has a measurable output (PV), a known ideal value for that output (SP), and an input to the process (MV) that will affect the relevant PV. Controllers are used in industry to regulate temperature, pressure, force, feed rate,[15] flow rate, chemical composition (component concentrations), weight, position, speed, and practically every other variable for which a measurement exists.

Spot failures early on: They say you can’t teach an old dog new tricks, but ‘Spot’ is here to prove otherwise. This four-legged industrial robot never stops learning, and with its newest capabilities, it’s about to make maintenance operations even smarter. Here, Tom Cash, director of automation parts supplier Foxmere, explains how the technologies used by Spot can help to give […] The post Spot failures early on appeared first on Industrial Compliance.

As robotic systems become more prevalent in #industrial automation, the intricacies of addressing #robotsafety in production systems are crucial. Discover how Benthor, a leading automation machinery manufacturer, uses Siemens #ProcessSimulate software to help improve robotics safety and efficiency, resulting in optimized production cycles with the highest safety standards. Read more ➡️ https://sie.ag/2uEkLx

As robotic systems become more prevalent in #industrial automation, the intricacies of addressing #robotsafety in production systems are crucial. Discover how Benthor, a leading automation machinery manufacturer, uses Siemens #ProcessSimulate software to help improve robotics safety and efficiency, resulting in optimized production cycles with the highest safety standards. Read more ➡️ https://sie.ag/2uEkLx

As robotic systems become more prevalent in #industrial automation, the intricacies of addressing #robotsafety in production systems are crucial. Discover how Benthor, a leading automation machinery manufacturer, uses Siemens #ProcessSimulate software to help improve robotics safety and efficiency, resulting in optimized production cycles with the highest safety standards. Read more ➡️ https://sie.ag/2uEkLx

As robotic systems become more prevalent in #industrial automation, the intricacies of addressing #robotsafety in production systems are crucial. Discover how Benthor, a leading automation machinery manufacturer, uses Siemens #ProcessSimulate software to help improve robotics safety and efficiency, resulting in optimized production cycles with the highest safety standards. Read more ➡️ https://sie.ag/2uEkLx

As robotic systems become more prevalent in #industrial automation, the intricacies of addressing #robotsafety in production systems are crucial. Discover how Benthor, a leading automation machinery manufacturer, uses Siemens #ProcessSimulate software to help improve robotics safety and efficiency, resulting in optimized production cycles with the highest safety standards. https://sie.ag/2uEkLx