Micro Harmonics Co. | MMW Components’ Post

In this blog post, discover the differences between high-frequency millimeter wave (mmWave) systems and lower frequency #5G bands, as well as advanced test techniques for optimizing amplifier performance in demanding #mmWave environments. Readers also have access to an excellent resource that reviews how the Nano5G™ Series Automated Impedance Tuners from Maury Microwave integrates into a passive on-wafer load pull measurement system to maximize tuning range, minimize phase skew, and ultimately optimize testing for 5G mmWave designs. https://hubs.la/Q02t3yyZ0 #TestAndMeasurement #LoadPull #PowerAmplifiers #5GSystems

Dive into our latest blog post to discover how microwave coaxial cable assemblies ensure accuracy and reliability. Read more here: https://buff.ly/3TdFCgP 💡 #PrecisionMeasurement #PhaseStability #MicrowaveTechnology

The HLM-70ACH from Marki Microwave is a Schottky Diode Signal Limiter that operates in the V-band from DC to 70 GHz. It can handle a CW input power of 1 W and has an insertion loss of 0.8 dB. https://lnkd.in/dPs6gjK2

The HLM-100001PSM from Marki Microwave is a GaAs Schottky Diode Signal Limiter that operates in the X-band from DC to 10 GHz. It can handle a CW input power of up to 10 W, has an insertion loss of less than 1.5 dB and a flat leakage of less than 11.5 dBm. https://lnkd.in/dtnUcEGF

How do you make an #RF or #microwave power splitting network? Here is a case study for an 8 way, 6-20 GHz 8-way power splitting network with different methods for creating an 8 way surface mount split using #Wilkinson and resistive power dividers in different configurations https://lnkd.in/gamirp-A Visit https://lnkd.in/gjC_2Th to find out more about Marki's capabilities

OZC Plug in Modules featured on cover of Microwave Product Digest The JXM series plugin modules for J-Chassis platforms extend RF and microwave over fiber transport into the Ku, K, Ka, Q, and V bands. They can have lower frequency roll-off as low as 20 kHz, and the JXM series of receivers offer a spurious-free dynamic range for a typical link of 108 dB/Hz. Noise figure, input 1 dB compression, and input third-order intercept performance can be optimized for various optical loss budgets. https://lnkd.in/gP2cwC3r

#power divider# The TPD10265A8A from TAP Microwave Components is a 1-26.5GHz 8 way power divider. It has a insertion loss of 4.8 dB and isolation 15dB min. The device can handle up to 20 W of average and 1 kW of peak input power. Size is 117.9 x 110 x 12.7 mm without 2.92mm-type female connectors. https://lnkd.in/gEAps9B5

See what's new Quantic PMI (Planar Monolithics)... Model CL9D43-300-CD-SFF is a combline bandpass filter with a center frequency of 9.43 GHz with an insertion loss of 4 dB and bandwidth of 0.3 GHz. Package size is 2.25" x 0.40" x 0.50" with SMA female connectors. Other bandpass filter designs available @... https://lnkd.in/dW8vszMC #RF #RFengineering #microwave

What transmission rate provides your antenna array?

Scientific Microwave Corp Introduces WR75 Half-Height Dual Waveguide Coupler from 10.7 to 12.75 GHz Read more: https://ow.ly/S3zu50U9Mj3 #coupler #waveguide #antennasystems #networkanalysis #testandmeasurement