Jessica Liu’s Post

Do you know how air is distributed with hot water baseboard systems? The water is heated by a boiler, and this is piped to “fin-tube” baseboard units that are mounted along walls. The fins increase the surface area of heat dissipation, making the unit more efficient.

The all-in-one water pressure booster, SCALA2, can be installed in 4 simple steps: 1️⃣ Connect the pipes. The inlet and outlet connections are adjustable by up +/- 5°, making the installation even easier. 2️⃣ Prime the pump: the large priming plug enables you to fill water quickly and easily. You must fill the pump with a minimum of 1.7 liters of water. 3️⃣ Plug the pump into a power outlet and start the pump. The default pressure setting is 3 bar (43 psi). 4️⃣ Adjust the tank precharge pressure according to the setpoint. More information❔ Please watch the installation video on the product page or look for the guide on the packaging. 👉 http://spr.ly/60405N5tK #WaterPressure #WaterBoost #PressureBoosting #WaterPump #GrundfosSCALA2 #WaterBoosting #Boosting

The all-in-one water pressure booster, SCALA2, can be installed in 4 simple steps: 1️⃣ Connect the pipes. The inlet and outlet connections are adjustable by up +/- 5°, making the installation even easier. 2️⃣ Prime the pump: the large priming plug enables you to fill water quickly and easily. You must fill the pump with a minimum of 1.7 liters of water. 3️⃣ Plug the pump into a power outlet and start the pump. The default pressure setting is 3 bar (43 psi). 4️⃣ Adjust the tank precharge pressure according to the setpoint. More information❔ Please watch the installation video on the product page or look for the guide on the packaging. 👉 http://spr.ly/6045eehVx #WaterPressure #WaterBoost #PressureBoosting #WaterPump #GrundfosSCALA2 #WaterBoosting #Boosting

2 hot water Pipes , view from outlet pipes, get contacts with eksternal flow that have some speed

The all-in-one water pressure booster, SCALA2, can be installed in 4 simple steps: 1️⃣ Connect the pipes. The inlet and outlet connections are adjustable by up +/- 5°, making the installation even easier. 2️⃣ Prime the pump: the large priming plug enables you to fill water quickly and easily. You must fill the pump with a minimum of 1.7 liters of water. 3️⃣ Plug the pump into a power outlet and start the pump. The default pressure setting is 3 bar (43 psi). 4️⃣ Adjust the tank precharge pressure according to the setpoint. More information❔ Please watch the installation video on the product page or look for the guide on the packaging. 👉 http://spr.ly/6044dkgzy #WaterPressure #WaterBoost #PressureBoosting #WaterPump #GrundfosSCALA2 #WaterBoosting #Boosting

The all-in-one water pressure booster, SCALA2, can be installed in 4 simple steps: 1️⃣ Connect the pipes. The inlet and outlet connections are adjustable by up +/- 5°, making the installation even easier. 2️⃣ Prime the pump: the large priming plug enables you to fill water quickly and easily. You must fill the pump with a minimum of 1.7 liters of water. 3️⃣ Plug the pump into a power outlet and start the pump. The default pressure setting is 3 bar (43 psi). 4️⃣ Adjust the tank precharge pressure according to the setpoint. More information❔ Please watch the installation video on the product page or look for the guide on the packaging. 👉 http://spr.ly/6045WvUIh #WaterPressure #WaterBoost #PressureBoosting #WaterPump #GrundfosSCALA2 #WaterBoosting #Boosting

Blowdown valves are commonly used to control the concentration of dissolved solids in the boiler water. Learn more: https://buff.ly/4dt8Q2f #BlowdownValve #BoilerMaintenance #FossilFuelBoilers #DissolvedSolids #BoilerDesign

Shell And Tube Water-Cooled Evaporator Condenser will be designed based on the operating conditions as belows: Inlet water temp.: tW1=30℃ Outlet water temp.:tW2=35℃ Condensing temp.: 40℃ Cooling water flow rate:1.5〜2.5m/s

#Energystorage Liquid Cooling Primary Pipe Line Air Tightness Test

The all-in-one water pressure booster, SCALA2, can be installed in 4 simple steps: 1️⃣ Connect the pipes. The inlet and outlet connections are adjustable by up +/- 5°, making the installation even easier. 2️⃣ Prime the pump: the large priming plug enables you to fill water quickly and easily. You must fill the pump with a minimum of 1.7 liters of water. 3️⃣ Plug the pump into a power outlet and start the pump. The default pressure setting is 3 bar (43 psi). 4️⃣ Adjust the tank precharge pressure according to the setpoint. More information❔ Please watch the installation video on the product page or look for the guide on the packaging. 👉 http://spr.ly/6048jSX5q #WaterPressure #WaterBoost #PressureBoosting #WaterPump #GrundfosSCALA2 #WaterBoosting #Boosting