From the course: Revit 2019: Essential Training for MEP (Imperial)

Unlock the full course today

Join today to access over 24,200 courses taught by industry experts.

Adding additional piping

Adding additional piping - Revit MEP Tutorial

From the course: Revit 2019: Essential Training for MEP (Imperial)

Start my 1-month free trial Buy for my team

Adding additional piping

“

- [Instructor] Just like Domestic Piping, we kind of need a fixture, or equipment to get started. When we get into Hydronic Piping and Process Piping, this point is emphasized even more. As you will see, each piece of equipment will have an array of different connection points. Let's go through the procedure of adding pipe to these connection points. Let's jump into the mechanical room and start adding to the pumps that are sitting there. Once we're done, we'll create a nice isometric view. To get started, let's make sure we're in Plumbing, Floor Plans, Enlarged Mechanical Room. Let's make sure our scale is set to quarter inch equals a foot. Let's zoom in on the pumps, and the first thing I want to do is select this first pump. Notice that we have all these different connection points. For out, one inch, I want to draw a pipe out from here, over and up the wall, and down. I'm going to click this icon to do it. First thing I'll notice is my offset is six and a quarter inches. We would…

Contents