Kevin Wible

High NILS (normalized image log-slope) for via patterning is most easily and naturally achieved with phase shift masks (PSMs). EUV lacks the PSM, so DUV multipatterning is still expected to be necessary https://lnkd.in/gBqcXXYs.

27

1 Comment

This quick demo shows how to measure the temperature using a K-Type thermocouple and the #MulticompPro Multimeter MP730678. See the multimeter here: https://lnkd.in/gDpxUP4A

3

Explore the latest insights on TDECQ measurement accuracy in Greg Le Cheminant's recent Electronic Design article. Gain insights into ensuring data reliability and understanding instrumentation effects—essential for professionals in optical communications. #TDECQ #ElectronicDesign <https://gag.gl/bOSPY5?>

1

To our knowledge, no North American River Otters currently subscribe to the TechInsights Semiconductor Information Platform. Coincidence? Surely not! Be more informed than your local semi-aquatic critter by checking out the go-to answer to your semiconductor information and analysis needs. Take a look at this article on how #AdvancedPackaging will help semiconductors continue to drive industries forward: https://bit.ly/4c2Nwk8

7

Check out my new blog on using our #radhard #MCU to reconfigure #Space deployed #FPGA. Please reach out if you have interest and we can provide specific details on how to deploy

13

Multipatterning is a necessity for DUV or even EUV lithography to continue scaling. It is important to present a better way to streamline the multipatterning process. https://lnkd.in/gKga49VZ

32

4 Comments

Signal integrity is crucial for the success of your PCB design. It determines the quality and reliability of electrical signals within the circuit. Issues like signal degradation, crosstalk, and EMI can arise from poor signal integrity, potentially leading to system failure. To ensure optimal performance, it is vital to prioritize signal integrity in your PCB layout. #PCBdesign #SignalIntegrity #ElectronicsEngineering

1

Check out our new blog focusing on Power Spectral Density.

2

Sandra Cipriani and Scott Leithem have a great conversation to share how to reduce measurement risk through periodic calibration with KeysightCare in our latest blog post. Check it out! #calibration #KeysightCare

6

Pulse Electronics Corporation TLVR Dual Winding Inductors. These inductors feature TLVR topology that enables faster transient response and utilizes a dual-winding power bead inductor. https://lnkd.in/gnYMdzbY

1

Happy #CostModelMonday! I did a #fan-out panel-level versus wafer-level comparison at #IMAPS DPC this year, and I'm expanding on it for the IMAPS Symposium. I had a single #yield chart in my analysis previously, looking at yield crossover points in relation to how expensive the incoming chip was. I did a new analysis that looks at when the crossover point occurs for two different panel sizes. In this chart, the same package is built with fan-out packaging on a 300mm wafer and from two different panel sizes. The yield for the 300mm wafer example is held steady at 99%, while the yield is changed for the panel-level processes. For the package built with the 515x510mm panel, the crossover point occurs just past 95%. However, the crossover point is closer to 94% for the package from the 600x600mm panel. In other words, a little more yield loss can be sustained by the package from the larger panel before it no longer competes with a higher yielding package from the wafer.

15

Automotive #SerDes and #Ethernet are transforming in-vehicle networking (IVN) — yet they pose new testing challenges from signal integrity to performance and compliance. Read the full guide to explore the latest standards, impacts of PAM signaling, and how Keysight helps streamline your #IVN tests: https://gag.gl/Y1lUwp?

1

This is another example of a Stood-up Drop for #contactangle measurements! Stood-up drops make receding contact angle measurements child’s play. If you want to learn how it works and why it is so helpful assessing surface readiness join our webinar on October 17th! 👉 https://lnkd.in/eam3jzny Many thanks to the scientists from Max-Planck-Institut für Polymerforschung around Doris Vollmer and Hans-Jürgen Butt for this wonderful high speed recording. #contactangle #surfacefreeenergy #plasmatreatment #coronatreatment #cleaning

35

2 Comments

Lightning strikes, static electricity and more can cause a logic ground and earth ground short. The following article describes the issue, the solution, and the causes.

8

The US Department of Energy is about to condemn the entire population! Through a recent decision to ban the import and sale in the US of lighting that does not meet a minimum "lumens per watt" standard, the DOE is demonstrating its total lack of comprehension of the harm that blue-pumped LEDs can cause. In its blinkered mania to decrease energy consumption, rather than legislating against wasteful uses of energy that serve no beneficial purpose, it is planning to legislate against less energy-efficient forms of lighting than blue-pumped LEDs. In its consideration of the health impact of this ruling, it has only considered emissions reductions: "Health benefits are calculated using benefit-per-ton values for NOx and SO2. DOE is currently only monetizing (for SO2 and NOx) PM2.5 precursor health benefits and (for NOx) ozone precursor health benefits, but will continue to assess the ability to monetize other effects such as health benefits from reductions in direct PM2.5 emissions." The insanity of this beggars belief! 🤡 ...and I thought that #DEFRA were incompetent! This takes it to a whole new level. (Thanks Martin Moore-Ede for the heads up!)

10

8 Comments

📣 Are you experiencing difficulty with your module being too dim? 📣 Do you want to upgrade the saturation on your display? 📣 Interested in enhancing color accuracy on your display?   📋 Themes this week：NEW QD display tech. lesson! WINSTAR has introduced NEW QD display technology, which seamlessly integrates a quantum dot film into LCD displays, enhancing 30% wider color saturation while maintaining technological compatibility. ✨   📋 Compared to traditional LCDs, QD technology improves color saturation in green and red colors. (Please refer to below pictures) This innovative technology could be applied to medical devices to distinguish patient's condition with better color performances.

3

Earth-Observation payloads produce a fastly growing amount of data. Why bother dumping TB/s of digitized images when they can be processed and analyzed in quasi-real time ? Teledyne e2v #EdgeComputing #Aerospace #EarthObservation

13

1 Comment

NI (National Instruments) mioDAQ release was a generational update not just in performance (20-bit resolution, MSample/s rates), but creature comforts to ensure this is an instrument you love and want to use: QR code-guided setup, new, free datalogging software, USB-C power and slick all-metal shell. See it in action! 👉https://lnkd.in/eQuUVSni Want to try one out? Give Testforce a shout!

56

1 Comment