Jaepyo Park, AIA, LEED AP

Jaepyo Park, AIA, LEED AP

San Francisco Bay Area
3K followers 500+ connections

About

Jaepyo Park has extensive experience encompassing all phases of design from master…

Activity

Join now to see all activity

Experience

  • PBK Graphic

    PBK

    Berkeley, California, United States

  • -

    San Francisco Bay Area

  • -

    San Francisco Bay Area

  • -

    San Francisco Bay Area

  • -

  • -

  • -

Education

  • University of Michigan, Ann Arbor

    -

    2000 Annual Student Award - second prize/ alumni special mention - Material Institute

  • -

    First Place - Undergraduate Thesis, Project - Seoul City Hall, 1996

Licenses & Certifications

Projects

  • 490 Brannan St. Office Building (lab-ready)

    -

    The 490 Brannan project demolishes the existing 6,048 square foot vacated commercial building (DBA Wells Fargo –Central SoMa Key Development Site) and constructs a 12-story, two-level basement, 185-foot-tall mixed-used office building. The building has 21’-0” floor to floor height at the ground level, allowing Art PDR uses, ground level retail and a child-care facility all all enhanced with connected mezzanine areas. The building above provides office space from level 2 through 12, with roof…

    The 490 Brannan project demolishes the existing 6,048 square foot vacated commercial building (DBA Wells Fargo –Central SoMa Key Development Site) and constructs a 12-story, two-level basement, 185-foot-tall mixed-used office building. The building has 21’-0” floor to floor height at the ground level, allowing Art PDR uses, ground level retail and a child-care facility all all enhanced with connected mezzanine areas. The building above provides office space from level 2 through 12, with roof terraces at Levels 6 and 10. The proposed building includes a Privately Owned Public Open Space (POPOS) as a mid-block connection between Brannan and Freelon Street Mostly as Open-to-Sky, this POPOS and Child Care Outdoor space is a 30 feet-wide Mid-Block Alley between Brannan Street and Freelon Street along north side of lot with mainly pedestrian access. Various setbacks and street widening are provided per planning requirement to accommodate expected high pedestrian traffic from newly constructed MUNI station at corner of 4th and Brannan. To accommodate the two-level basement, excavation is expected to be exceed 20 feet below grade. The project has been designed as a mid-rise building and complies with all Section 132.4 massing restrictions, as well as skyplane controls on mid-rise buildings with minor deviations that were approved with entitlements. The project fully achieves the Guidelines goals of emphasizing the importance of the corner at 4th and Brannan Streets, by creating a vertical massing expression that acts as an urban beacon and “holds” the urban corner.

  • 1717 Mission St. Life Science Building

    -

    The proposed project occupies a unique site flanked by the 101 freeway and ramp towards two sides and faces an industrial / residential neighborhood on mission and Erie street on the other two. The site also navigates an interesting interface at 13th street where it opens on the underside of the freeway. The proposed design addresses the immediate site context and creates a positive impact to the neighborhood at large. The facade towards the freeway and ramp is faceted to provide glazing at an…

    The proposed project occupies a unique site flanked by the 101 freeway and ramp towards two sides and faces an industrial / residential neighborhood on mission and Erie street on the other two. The site also navigates an interesting interface at 13th street where it opens on the underside of the freeway. The proposed design addresses the immediate site context and creates a positive impact to the neighborhood at large. The facade towards the freeway and ramp is faceted to provide glazing at an angle to allow views towards the central business district while blocking glare from oncoming traffic on the freeways. a translucent screen material will be used to create angled fins that will allow light to percolate through while creating a visual buffer from the freeway. At the street level, the project intends to use a ‘lantern’ effect and will employ a perforated screen to create a brightly lit sidewalk underneath the freeway. The design aims to transform a grim, dark space into a bright and visually interesting public face. The building face at the street level is pulled back from the property line to create a green buffer zone that will incorporate lighting and a perforated screen to make the ‘lantern’; while also providing a visual and spatial relief for the building occupants. The facades towards mission street are more transparent but employ thickened vertical mullions or fins to break up the scale of the long building faces. As a reaction to the smaller scale of residential buildings on mission street, the elevation here is broken up by a series of ‘pop-outs’ bays. These spaces will function as a break-out space and respond to the bay-windows across the street. A central core is planned for the building that will allow maximum access to daylight for all tenant spaces along the periphery. In addition to the central core, two stairs are planned to serve 4 stories above grade and 1 basement parking level below grade.

  • Sierra College New Institutional Building

    -

    Located in Rockland California, Sierra College has been serving the surround community since 1936. The new Instructional Building is intended to provide over 84,000 s.f. of new spaces. The program includes; lecture, photography, art, ceramics and sculpture studios as well as administrative and meeting spaces. Designed as a working canvas with natural light, strategic transparency, and sustainable materiality. The new facility will serve generations of students for years to come.. It provides…

    Located in Rockland California, Sierra College has been serving the surround community since 1936. The new Instructional Building is intended to provide over 84,000 s.f. of new spaces. The program includes; lecture, photography, art, ceramics and sculpture studios as well as administrative and meeting spaces. Designed as a working canvas with natural light, strategic transparency, and sustainable materiality. The new facility will serve generations of students for years to come.. It provides ground-level access for Art, Ceramics, and Sculpture Studios. Using the half-story also provides an advantageous northen exposure for these spaces. The plan is organized on two axes: north-south which frames views to the natural landscape; and east-west which anchors the building as a student and faculty reading, studying, and socializing space. The east-west student and faculty reading, studying and socializing space is replicated on 2nd floor. The wide gallery circulation spaces are also replicated. Break two masses apart to align the western wing to Weaver Hall. Create a generous entry plaza while still maintaining views to the north. Transparent lobby and connective core of the NIB with expansive views north and south. All departments are visible from this space. East and west solar exposure are mitigated with the east and west wings. Rotated building mass respond to the natural grade of the site, opens the building to the population
    coming from the parking garage, and expose itself past Weaver Hall to the south. Clear glass atrium space, connecting students circulating to the west side of campus.

  • New Science Building, Folsom Lake College

    -

    Design Principal

    The expansion of Folsom Lake College Science program has been identified in the Facilities Master Plan since early projections of the campus expansion. Two instructional buildings were identified in the 2010 Master Plan as part of the expansion phases 2.1 and 2.2. In the summer of 2010, the District engaged a group of representatives of the Folsom Lake College Science Department to define the program for the future Science building as part of phase 2.1. This program…

    Design Principal

    The expansion of Folsom Lake College Science program has been identified in the Facilities Master Plan since early projections of the campus expansion. Two instructional buildings were identified in the 2010 Master Plan as part of the expansion phases 2.1 and 2.2. In the summer of 2010, the District engaged a group of representatives of the Folsom Lake College Science Department to define the program for the future Science building as part of phase 2.1. This program identified a need for 30,700 ASF of Science Laboratory and Learning Resource spaces, 8,800 ASF of General Classroom and 9,400 ASF of Office support spaces. In June of 2010 the Los Rios Community College District submitted a Final Project Proposal for State funding approval that included a 75,000 GSF building. The budget was approved as part of the 2018-19 Capital Outlay Budget.

  • Koda Condominium Tower

    -

    Design Director

    Mixed use development for Seattle’s International District features commercial and public space on the street level, offices on the second level, residential units above to be topped off with a lounge and karaoke bar. 150 ft. height with 168 residential units,10,000 SF of commercial space and parking for 84 vehicles. Site is across the street from King Street Station.

  • Hawaii State Hospital

    -

    Design Director

    The Hawaii Department of Health (DOH), the Department of Accounting and General Services (DAGS) has awarded a $140 million contract to the Design-Build team of KMD (Design Architect) and G70 (Hawaii Architect of Record) led by Hensel Phelps (Builder), to design and build a new 144-bed forensic psychiatric facility for the Hawaii State Hospital in Kaneohe. The facility will ease overcrowding and better separate higher-risk behavioral health patients from the general…

    Design Director

    The Hawaii Department of Health (DOH), the Department of Accounting and General Services (DAGS) has awarded a $140 million contract to the Design-Build team of KMD (Design Architect) and G70 (Hawaii Architect of Record) led by Hensel Phelps (Builder), to design and build a new 144-bed forensic psychiatric facility for the Hawaii State Hospital in Kaneohe. The facility will ease overcrowding and better separate higher-risk behavioral health patients from the general population. The new building will replace a recently demolished facility and occupy a site of about five acres on the upper campus. 255 stalls for parking will be included and about 180,000 square feet of patient, treatment, and support
    space will be provided in a multi-story building. Elements include a 24-bed admissions unit for assessment of new patients, a 24-bed high-risk unit for patients needing specialized care, four 24-bed units for patients for routine care, and a treatment mall with services such as occupational, recreational, and rehabilitation therapy to assist patients with their recovery within this facility. The treatment areas will have a therapeutic environment with separate interaction areas for activities and a secured outdoor yard area for walking and exercise.

  • Ministry of Health Medical Tower - Abha, Kingdom of Saudi Arabia

    -

    Design Director

    A 300 Bed and 500-bed High-Rise Prototype General Hospital for the Kingdom of Saudi Arabia Ministry of Health that will be built throughout the Kingdom in high density cities. Uses include ED, Inpatient Bed Towers, Outpatient Clinics, Testing Labs and general support spaces. The Ministry of Health of the Kingdom of Saudi Arabia recognized their unique opportunity to redefine the brand of public healthcare in the kingdom as a place of Quality, Patient Centric Care. The…

    Design Director

    A 300 Bed and 500-bed High-Rise Prototype General Hospital for the Kingdom of Saudi Arabia Ministry of Health that will be built throughout the Kingdom in high density cities. Uses include ED, Inpatient Bed Towers, Outpatient Clinics, Testing Labs and general support spaces. The Ministry of Health of the Kingdom of Saudi Arabia recognized their unique opportunity to redefine the brand of public healthcare in the kingdom as a place of Quality, Patient Centric Care. The decision was to develop a new prototype on a smaller, more personal level, but focused to serve urban settings, rather than suburban or large medical cities.

    Finalist "2015 Best Hospital of the Future Award," Building Healthcare Middle East Conference

    See project
  • King Faisal University Medical Colleges Complex - Al Ahsa, Kingdom of Saudi Arabia

    -

    Design Director

    Strategies were developed to protect the interior areas of the campus from the strongest winds as well as to channel the wind both to potentially generate electricity through wind turbines and to allow softer cooling breezes to penetrate.

    The buildings of the campus are shaped to steer the wind through the spaces between the buildings with the goal of cooling the spaces and the facades of the buildings. To maintain a lower rise vocabulary conducive to the movement…

    Design Director

    Strategies were developed to protect the interior areas of the campus from the strongest winds as well as to channel the wind both to potentially generate electricity through wind turbines and to allow softer cooling breezes to penetrate.

    The buildings of the campus are shaped to steer the wind through the spaces between the buildings with the goal of cooling the spaces and the facades of the buildings. To maintain a lower rise vocabulary conducive to the movement of the wind, the shared lab building program has been split into two shorter buildings. The space between the two Lab buildings has been used to create a women’s only plaza focused on collaborative interactions.

    Forming a spine down the center of the campus with the classroom and lab buildings on each side is a curving and undulating structure housing the shared campus amenities, such as shared dining facilities, central library and student activity spaces including a gymnasium. The curving spine building roof starts at the northwest over the large, shared auditorium and terminates at the southeast part of the campus where it wraps up and onto the Dental Building, more firmly linking the Dental Building with the rest of the campus. For the King Faisal University with Dar Al-Omran.

    See project
  • Genentech Hilltop A Office Building

    -

    A science-based company’s success depends on innovation, creativity, thoughtful analysis
    and proven results. Our approach to the Hilltop - A (HTA) building design is identical
    and seeks to create a product of measurable long-term value. Building systems will
    meet the facility’s functional requirements, return on the highest Net Present Value (NPV) to Genentech
    while meeting the company’s rigorous energy efficiency requirements. The design will enhance employee well-being and…

    A science-based company’s success depends on innovation, creativity, thoughtful analysis
    and proven results. Our approach to the Hilltop - A (HTA) building design is identical
    and seeks to create a product of measurable long-term value. Building systems will
    meet the facility’s functional requirements, return on the highest Net Present Value (NPV) to Genentech
    while meeting the company’s rigorous energy efficiency requirements. The design will enhance employee well-being and interactions and create a generous sense of both community and place within the campus. Elegance will result from a simple and strategic design approach with broad and enduring benefits. The development of the HTA building on Campus is the first of a series of projects meant to optimize business adjacencies within the office portfolio on Genentech’s South San Francisco campus. This new HTA building will be located on area known as “Upper Campus” on Grandview Avenue in close proximity of recently completed buildings 31,32 & 33. Cohesiveness of the full Master Plan has been
    considered in all phases of the HTA project.

  • CREATE (Campus for Research Excellence and Technological Enterprise)

    -

    Lab of the year award, R&D magazine and Laboratory Design Newsletter, 2013

    The CREATE campus is composed of three mid-rise buildings interlaced with landscape and a high-rise tower sharing a covered pedestrian Town Center. The tower engages a podium that houses student amenities at grade and CREATE’s headquarters facilities at level two. Unlike traditional laboratory buildings that are wide and divided by interior partitions and corridors, CREATE presents long, column free, unusually…

    Lab of the year award, R&D magazine and Laboratory Design Newsletter, 2013

    The CREATE campus is composed of three mid-rise buildings interlaced with landscape and a high-rise tower sharing a covered pedestrian Town Center. The tower engages a podium that houses student amenities at grade and CREATE’s headquarters facilities at level two. Unlike traditional laboratory buildings that are wide and divided by interior partitions and corridors, CREATE presents long, column free, unusually narrow building modules that allow daylight to penetrate and naturally illuminate the interior spaces, significantly reducing energy consumption. Views to the landscaped gardens are abundant, enhancing the research environment.

Honors & Awards

  • Lab of the year

    R&D magazine and laboratory design newsletter

  • P/A Award

    Architect Magazine

    Calexico US Port of Entry, CA - Project Designer

Languages

  • English

    Native or bilingual proficiency

  • Korean

    Native or bilingual proficiency

More activity by Jaepyo

View Jaepyo’s full profile

  • See who you know in common
  • Get introduced
  • Contact Jaepyo directly
Join to view full profile

Other similar profiles

Explore collaborative articles

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Explore More

Add new skills with these courses