FreeBSD Manual Pages
VMSTAT(8) System Manager's Manual VMSTAT(8) NAME vmstat -- report virtual memory statistics SYNOPSIS vmstat [-afHhimPsz] [-c count] [-M core [-N system]] [-w wait] [-n devs] [-p type,if,pass] [disks] DESCRIPTION The vmstat utility reports certain kernel statistics kept about process, virtual memory, disk, trap and cpu activity. If the -M option is not specified, information is obtained from the currently running kernel via the sysctl(3) interface. Otherwise, in- formation is read from the specified core file, using the name list from the specified kernel image (or from the default image). The options are as follows: -a When used with -i, include statistics about interrupts that have never been generated. -c Repeat the display count times. The first display is for the time since a reboot and each subsequent report is for the time period since the last display. If no repeat count is speci- fied, and -w is specified, the default is infinity, otherwise the default is one. -f Report on the number fork(2), vfork(2) and rfork(2) system calls since system startup, and the number of pages of virtual memory involved in each. -h Changes memory columns into more easily human readable form. Default if standard output is a terminal device. -H Changes memory columns into straight numbers. Default if stan- dard output is not a terminal device (such as a script). -i Report on the number of interrupts taken by each device since system startup. -M Extract values associated with the name list from the specified core. -N If -M is also specified, extract the name list from the speci- fied system instead of the default, which is the kernel image the system has booted from. -m Report on the usage of kernel dynamic memory allocated using malloc(9) by type. -n Change the maximum number of disks to display from the default of 2. -P Report per-cpu system/user/idle cpu statistics. -p Specify which types of devices to display. There are three different categories of devices: device type: da Direct Access devices sa Sequential Access devices printer Printers proc Processor devices worm Write Once Read Multiple devices cd CD devices scanner Scanner devices optical Optical Memory devices changer Medium Changer devices comm Communication devices array Storage Array devices enclosure Enclosure Services devices floppy Floppy devices interface: IDE Integrated Drive Electronics devices SCSI Small Computer System Interface devices other Any other device interface passthrough: pass Passthrough devices The user must specify at least one device type, and may specify at most one device type from each category. Multiple device types in a single device type statement must be separated by commas. Any number of -p arguments may be specified on the command line. All -p arguments are ORed together to form a matching expression against which all devices in the system are com- pared. Any device that fully matches any -p argument will be included in the vmstat output, up to two devices, or the maxi- mum number of devices specified by the user. -s Display the contents of the sum structure, giving the total number of several kinds of paging related events which have oc- curred since system startup. -w Pause wait seconds between each display. If no repeat wait in- terval is specified, the default is 1 second. -z Report on memory used by the kernel zone allocator, uma(9), by zone. By default, vmstat displays the following information: procs Information about the numbers of processes in various states. r in run queue b blocked for resources (i/o, paging, etc.) w runnable or short sleeper (< 20 secs) but swapped memory Information about the usage of virtual and real memory. Vir- tual pages (reported in units of 1024 bytes) are considered ac- tive if they belong to processes which are running or have run in the last 20 seconds. avm active virtual pages fre size of the free list page Information about page faults and paging activity. These are averaged each five seconds, and given in units per second. flt total number of page faults re page reclaims (simulating reference bits) pi pages paged in po pages paged out fr pages freed per second sr pages scanned by clock algorithm, per-second disks Disk operations per second (this field is system dependent). Typically paging will be split across the available drives. The header of the field is the first two characters of the disk name and the unit number. If more than two disk drives are configured in the system, vmstat displays only the first two drives, unless the user specifies the -n argument to increase the number of drives displayed. This will probably cause the display to exceed 80 columns, however. To force vmstat to dis- play specific drives, their names may be supplied on the com- mand line. The vmstat utility defaults to show disks first, and then various other random devices in the system to add up to two devices, if there are that many devices in the system. If devices are specified on the command line, or if a device type matching pattern is specified (see above), vmstat will only display the given devices or the devices matching the pat- tern, and will not randomly select other devices in the system. faults Trap/interrupt rate averages per second over last 5 seconds. in device interrupts per interval (including clock inter- rupts) sy system calls per interval cs cpu context switch rate (switches/interval) cpu Breakdown of percentage usage of CPU time. us user time for normal and low priority processes sy system time id cpu idle FILES /boot/kernel/kernel default kernel namelist /dev/kmem default memory file EXAMPLES The command: vmstat -w 5 will print what the system is doing every five seconds; this is a good choice of printing interval since this is how often some of the statis- tics are sampled in the system. Others vary every second and running the output for a while will make it apparent which are recomputed every second. The command: vmstat -p da -p cd -w 1 will tell vmstat to select the first two direct access or CDROM devices and display statistics on those devices, as well as other systems sta- tistics every second. SEE ALSO fstat(1), netstat(1), nfsstat(1), ps(1), systat(1), libmemstat(3), gstat(8), iostat(8), pstat(8), sysctl(8), malloc(9), uma(9) The sections starting with ``Interpreting system activity'' in Installing and Operating 4.3BSD. BUGS The -c and -w options are only available with the default output. GNU October 21, 2006 VMSTAT(8)
NAME | SYNOPSIS | DESCRIPTION | FILES | EXAMPLES | SEE ALSO | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=vmstat&sektion=8&manpath=FreeBSD+7.1-RELEASE>