Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
UNTITLED()			     LOCAL			    UNTITLED()

NAME
       iwi -- Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 driver

SYNOPSIS
       To compile support for the
       iwi  driver  into your kernel, place the	following lines	in your	kernel
	   configuration file:

	     device iwi
	     device pci
	     device wlan

	   Alternatively, to load the
       iwi driver at boot time,	place the following line in loader.conf(5):

		 if_iwi_load="YES"

DESCRIPTION
       The iwi driver provides support for Intel  PRO/Wireless	2200BG/2915ABG
       MiniPCI and 2225BG PCI network adapters.

       By  default,  the  iwi  driver configures the adapter for BSS operation
       (aka infrastructure mode).  This	mode requires the  use	of  an	access
       point.

       For more	information on configuring this	device,	see ifconfig(8).

       This  driver  requires  firmware	to be loaded before it will work.  You
       need to obtain iwicontrol(8) from the IWI web page listed below to  ac-
       complish	loading	the firmware before ifconfig(8)	will work.

EXAMPLES
       Join an existing	BSS network (i.e., connect to an access	point):

	     ifconfig iwi0 inet	192.168.0.20 netmask 0xffffff00

       Join a specific BSS network with	network	name "my_net":

	     ifconfig iwi0 inet	192.168.0.20 netmask 0xffffff00	ssid my_net

       Join a specific BSS network with	64-bit WEP encryption:

	     ifconfig iwi0 inet	192.168.0.20 netmask 0xffffff00	ssid my_net \
		 wepmode on wepkey 0x1234567890

       Join a specific BSS network with	128-bit	WEP encryption:

	     ifconfig iwi0 inet	192.168.0.20 netmask 0xffffff00	ssid my_net \
		 wepmode on wepkey 0x01020304050607080910111213

DIAGNOSTICS
       iwi%d: device timeout  The driver will reset the	hardware.  This	should
       not happen.

       iwi%d:  Please load firmware  The required firmware has not been	loaded
       into the	card,  and  therefore  the  card  cannot  operate.   Load  the
       firmware	with iwicontrol(8) before proceeding.

SEE ALSO
       an(4),	ath(4),	  ipw(4),   pci(4),   wi(4),   wlan(4),	  ifconfig(8),
       iwicontrol(8), wicontrol(8)

       The IWI Web Page, http://damien.bergamini.free.fr/ipw/.

AUTHORS
       The iwi driver was written by Damien Bergamini <[email protected]>.

GNU				 July 16, 2005				IWI(4)

NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | DIAGNOSTICS | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=iwi&sektion=4&manpath=FreeBSD+6.0-RELEASE>

home | help