|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | WARNING | OPTIONS | DIAGNOSTICS | EXIT STATUS | AUTHORS | SEE ALSO | REPORTING BUGS | AVAILABILITY |
|
|
|
FSCK.MINIX(8) System Administration FSCK.MINIX(8)
fsck.minix - check consistency of Minix filesystem
fsck.minix [options] device
fsck.minix performs a consistency check for the Linux MINIX
filesystem.
The program assumes the filesystem is quiescent. fsck.minix
should not be used on a mounted device unless you can be sure
nobody is writing to it. Remember that the kernel can write to
device when it searches for files.
The device name will usually have the following form:
┌────────────────┬─────────────┐
│ │ │
│ /dev/hda[1-63] │ IDE disk 1 │
├────────────────┼─────────────┤
│ │ │
│ /dev/hdb[1-63] │ IDE disk 2 │
├────────────────┼─────────────┤
│ │ │
│ /dev/sda[1-15] │ SCSI disk 1 │
├────────────────┼─────────────┤
│ │ │
│ /dev/sdb[1-15] │ SCSI disk 2 │
└────────────────┴─────────────┘
If the filesystem was changed, i.e., repaired, then
fsck.minix will print "FILE SYSTEM HAS BEEN CHANGED" and
will sync(2) three times before exiting. There is no need
to reboot after check.
fsck.minix should not be used on a mounted filesystem.
Using fsck.minix on a mounted filesystem is very
dangerous, due to the possibility that deleted files are
still in use, and can seriously damage a perfectly good
filesystem! If you absolutely have to run fsck.minix on a
mounted filesystem, such as the root filesystem, make
sure nothing is writing to the disk, and that no files
are "zombies" waiting for deletion.
-l, --list
List all filenames.
-r, --repair
Perform interactive repairs.
-a, --auto
Perform automatic repairs. This option implies
--repair and serves to answer all of the questions
asked with the default. Note that this can be
extremely dangerous in the case of extensive
filesystem damage.
-v, --verbose
Be verbose.
-s, --super
Output super-block information.
-m, --uncleared
Activate MINIX-like "mode not cleared" warnings.
-f, --force
Force a filesystem check even if the filesystem was
marked as valid. Marking is done by the kernel when
the filesystem is unmounted.
-h, --help
Display help text and exit.
-V, --version
Print version and exit.
There are numerous diagnostic messages. The ones
mentioned here are the most commonly seen in normal
usage.
If the device does not exist, fsck.minix will print
"unable to read super block". If the device exists, but
is not a MINIX filesystem, fsck.minix will print "bad
magic number in super-block".
The exit status returned by fsck.minix is the sum of the
following:
0
No errors
3
Filesystem errors corrected, system should be
rebooted if filesystem was mounted
4
Filesystem errors left uncorrected
7
Combination of exit statuses 3 and 4
8
Operational error
16
Usage or syntax error
Linus Torvalds <[email protected]>. Exit status
values by Rik Faith <[email protected]> Added support for
filesystem valid flag: Dr. Wettstein
<greg%[email protected]>. Check to prevent fsck
of mounted filesystem added by Daniel Quinlan
<[email protected]>. Minix v2 fs support by Andreas
Schwab <[email protected]>, updated
by Nicolai Langfeldt <[email protected]>. Portability
patch by Russell King <[email protected]>.
fsck(8), fsck.ext2(8), mkfs(8), mkfs.ext2(8),
mkfs.minix(8), reboot(8)
For bug reports, use the issue tracker at
https://github.com/util-linux/util-linux/issues.
The fsck.minix command is part of the util-linux package
which can be downloaded from Linux Kernel Archive
<https://www.kernel.org/pub/linux/utils/util-linux/>.
This page is part of the util-linux (a random collection
of Linux utilities) project. Information about the
project can be found at
⟨https://www.kernel.org/pub/linux/utils/util-linux/⟩. If
you have a bug report for this manual page, send it to
[email protected]. This page was obtained from
the project's upstream Git repository
⟨git://git.kernel.org/pub/scm/utils/util-linux/util-linux.git⟩
on 2024-06-14. (At that time, the date of the most recent
commit that was found in the repository was 2024-06-10.)
If you discover any rendering problems in this HTML
version of the page, or you believe there is a better or
more up-to-date source for the page, or you have
corrections or improvements to the information in this
COLOPHON (which is not part of the original manual page),
send a mail to [email protected]
util-linux 2.39.594-1e0ad 2023-07-19 FSCK.MINIX(8)
Pages that refer to this page: fsck(8@@e2fsprogs), fsck(8), [email protected](8)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|