fuse(4) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | ERRORS | STANDARDS | NOTES | SEE ALSO | COLOPHON

fuse(4)                 Kernel Interfaces Manual                 fuse(4)

NAME         top

       fuse - Filesystem in Userspace (FUSE) device

SYNOPSIS         top

       #include <linux/fuse.h>

DESCRIPTION         top

       This device is the primary interface between the FUSE filesystem
       driver and a user-space process wishing to provide the filesystem
       (referred to in the rest of this manual page as the filesystem
       daemon).  This manual page is intended for those interested in
       understanding the kernel interface itself.  Those implementing a
       FUSE filesystem may wish to make use of a user-space library such
       as libfuse that abstracts away the low-level interface.

       At its core, FUSE is a simple client-server protocol, in which
       the Linux kernel is the client and the daemon is the server.
       After obtaining a file descriptor for this device, the daemon may
       read(2) requests from that file descriptor and is expected to
       write(2) back its replies.  It is important to note that a file
       descriptor is associated with a unique FUSE filesystem.  In
       particular, opening a second copy of this device, will not allow
       access to resources created through the first file descriptor
       (and vice versa).

   The basic protocol
       Every message that is read by the daemon begins with a header
       described by the following structure:

           struct fuse_in_header {
               uint32_t len;       /* Total length of the data,
                                      including this header */
               uint32_t opcode;    /* The kind of operation (see below) */
               uint64_t unique;    /* A unique identifier for this request */
               uint64_t nodeid;    /* ID of the filesystem object
                                      being operated on */
               uint32_t uid;       /* UID of the requesting process */
               uint32_t gid;       /* GID of the requesting process */
               uint32_t pid;       /* PID of the requesting process */
               uint32_t padding;
           };

       The header is followed by a variable-length data portion (which
       may be empty) specific to the requested operation (the requested
       operation is indicated by opcode).

       The daemon should then process the request and if applicable send
       a reply (almost all operations require a reply; if they do not,
       this is documented below), by performing a write(2) to the file
       descriptor.  All replies must start with the following header:

           struct fuse_out_header {
               uint32_t len;       /* Total length of data written to
                                      the file descriptor */
               int32_t  error;     /* Any error that occurred (0 if none) */
               uint64_t unique;    /* The value from the
                                      corresponding request */
           };

       This header is also followed by (potentially empty) variable-
       sized data depending on the executed request.  However, if the
       reply is an error reply (i.e., error is set), then no further
       payload data should be sent, independent of the request.

   Exchanged messages
       This section should contain documentation for each of the
       messages in the protocol.  This manual page is currently
       incomplete, so not all messages are documented.  For each
       message, first the struct sent by the kernel is given, followed
       by a description of the semantics of the message.

       FUSE_INIT

                  struct fuse_init_in {
                      uint32_t major;
                      uint32_t minor;
                      uint32_t max_readahead; /* Since protocol v7.6 */
                      uint32_t flags;         /* Since protocol v7.6 */
                  };

              This is the first request sent by the kernel to the
              daemon.  It is used to negotiate the protocol version and
              other filesystem parameters.  Note that the protocol
              version may affect the layout of any structure in the
              protocol (including this structure).  The daemon must thus
              remember the negotiated version and flags for each
              session.  As of the writing of this man page, the highest
              supported kernel protocol version is 7.26.

              Users should be aware that the descriptions in this manual
              page may be incomplete or incorrect for older or more
              recent protocol versions.

              The reply for this request has the following format:

                  struct fuse_init_out {
                      uint32_t major;
                      uint32_t minor;
                      uint32_t max_readahead;   /* Since v7.6 */
                      uint32_t flags;           /* Since v7.6; some flags bits
                                                   were introduced later */
                      uint16_t max_background;  /* Since v7.13 */
                      uint16_t congestion_threshold;  /* Since v7.13 */
                      uint32_t max_write;       /* Since v7.5 */
                      uint32_t time_gran;       /* Since v7.6 */
                      uint32_t unused[9];
                  };

              If the major version supported by the kernel is larger
              than that supported by the daemon, the reply shall consist
              of only uint32_t major (following the usual header),
              indicating the largest major version supported by the
              daemon.  The kernel will then issue a new FUSE_INIT
              request conforming to the older version.  In the reverse
              case, the daemon should quietly fall back to the kernel's
              major version.

              The negotiated minor version is considered to be the
              minimum of the minor versions provided by the daemon and
              the kernel and both parties should use the protocol
              corresponding to said minor version.

       FUSE_GETATTR

                  struct fuse_getattr_in {
                      uint32_t getattr_flags;
                      uint32_t dummy;
                      uint64_t fh;      /* Set only if
                                           (getattr_flags & FUSE_GETATTR_FH)
                  };

              The requested operation is to compute the attributes to be
              returned by stat(2) and similar operations for the given
              filesystem object.  The object for which the attributes
              should be computed is indicated either by header->nodeid
              or, if the FUSE_GETATTR_FH flag is set, by the file handle
              fh.  The latter case of operation is analogous to
              fstat(2).

              For performance reasons, these attributes may be cached in
              the kernel for a specified duration of time.  While the
              cache timeout has not been exceeded, the attributes will
              be served from the cache and will not cause additional
              FUSE_GETATTR requests.

              The computed attributes and the requested cache timeout
              should then be returned in the following structure:

                  struct fuse_attr_out {
                      /* Attribute cache duration (seconds + nanoseconds) */
                      uint64_t attr_valid;
                      uint32_t attr_valid_nsec;
                      uint32_t dummy;
                      struct fuse_attr {
                          uint64_t ino;
                          uint64_t size;
                          uint64_t blocks;
                          uint64_t atime;
                          uint64_t mtime;
                          uint64_t ctime;
                          uint32_t atimensec;
                          uint32_t mtimensec;
                          uint32_t ctimensec;
                          uint32_t mode;
                          uint32_t nlink;
                          uint32_t uid;
                          uint32_t gid;
                          uint32_t rdev;
                          uint32_t blksize;
                          uint32_t padding;
                      } attr;
                  };

       FUSE_ACCESS

                  struct fuse_access_in {
                      uint32_t mask;
                      uint32_t padding;
                  };

              If the default_permissions mount options is not used, this
              request may be used for permissions checking.  No reply
              data is expected, but errors may be indicated as usual by
              setting the error field in the reply header (in
              particular, access denied errors may be indicated by
              returning -EACCES).

       FUSE_OPEN and FUSE_OPENDIR
                  struct fuse_open_in {
                      uint32_t flags;     /* The flags that were passed
                                             to the open(2) */
                      uint32_t unused;
                  };

              The requested operation is to open the node indicated by
              header->nodeid.  The exact semantics of what this means
              will depend on the filesystem being implemented.  However,
              at the very least the filesystem should validate that the
              requested flags are valid for the indicated resource and
              then send a reply with the following format:

                  struct fuse_open_out {
                      uint64_t fh;
                      uint32_t open_flags;
                      uint32_t padding;
                  };

              The fh field is an opaque identifier that the kernel will
              use to refer to this resource The open_flags field is a
              bit mask of any number of the flags that indicate
              properties of this file handle to the kernel:

              FOPEN_DIRECT_IO
                     Bypass page cache for this open file.

              FOPEN_KEEP_CACHE
                     Don't invalidate the data cache on open.

              FOPEN_NONSEEKABLE
                     The file is not seekable.

       FUSE_READ and FUSE_READDIR

                  struct fuse_read_in {
                      uint64_t fh;
                      uint64_t offset;
                      uint32_t size;
                      uint32_t read_flags;
                      uint64_t lock_owner;
                      uint32_t flags;
                      uint32_t padding;
                  };

              The requested action is to read up to size bytes of the
              file or directory, starting at offset.  The bytes should
              be returned directly following the usual reply header.

       FUSE_INTERRUPT
                  struct fuse_interrupt_in {
                      uint64_t unique;
                  };

              The requested action is to cancel the pending operation
              indicated by unique.  This request requires no response.
              However, receipt of this message does not by itself cancel
              the indicated operation.  The kernel will still expect a
              reply to said operation (e.g., an EINTR error or a short
              read).  At most one FUSE_INTERRUPT request will be issued
              for a given operation.  After issuing said operation, the
              kernel will wait uninterruptibly for completion of the
              indicated request.

       FUSE_LOOKUP
              Directly following the header is a filename to be looked
              up in the directory indicated by header->nodeid.  The
              expected reply is of the form:

                  struct fuse_entry_out {
                      uint64_t nodeid;            /* Inode ID */
                      uint64_t generation;        /* Inode generation */
                      uint64_t entry_valid;
                      uint64_t attr_valid;
                      uint32_t entry_valid_nsec;
                      uint32_t attr_valid_nsec;
                      struct fuse_attr attr;
                  };

              The combination of nodeid and generation must be unique
              for the filesystem's lifetime.

              The interpretation of timeouts and attr is as for
              FUSE_GETATTR.

       FUSE_FLUSH
                  struct fuse_flush_in {
                      uint64_t fh;
                      uint32_t unused;
                      uint32_t padding;
                      uint64_t lock_owner;
                  };

              The requested action is to flush any pending changes to
              the indicated file handle.  No reply data is expected.
              However, an empty reply message still needs to be issued
              once the flush operation is complete.

       FUSE_RELEASE and FUSE_RELEASEDIR
                  struct fuse_release_in {
                      uint64_t fh;
                      uint32_t flags;
                      uint32_t release_flags;
                      uint64_t lock_owner;
                  };

              These are the converse of FUSE_OPEN and FUSE_OPENDIR
              respectively.  The daemon may now free any resources
              associated with the file handle fh as the kernel will no
              longer refer to it.  There is no reply data associated
              with this request, but a reply still needs to be issued
              once the request has been completely processed.

       FUSE_STATFS
              This operation implements statfs(2) for this filesystem.
              There is no input data associated with this request.  The
              expected reply data has the following structure:

                  struct fuse_kstatfs {
                      uint64_t blocks;
                      uint64_t bfree;
                      uint64_t bavail;
                      uint64_t files;
                      uint64_t ffree;
                      uint32_t bsize;
                      uint32_t namelen;
                      uint32_t frsize;
                      uint32_t padding;
                      uint32_t spare[6];
                  };

                  struct fuse_statfs_out {
                      struct fuse_kstatfs st;
                  };

              For the interpretation of these fields, see statfs(2).

ERRORS         top

       E2BIG  Returned from read(2) operations when the kernel's request
              is too large for the provided buffer and the request was
              FUSE_SETXATTR.

       EINVAL Returned from write(2) if validation of the reply failed.
              Not all mistakes in replies will be caught by this
              validation.  However, basic mistakes, such as short
              replies or an incorrect unique value, are detected.

       EIO    Returned from read(2) operations when the kernel's request
              is too large for the provided buffer.

              Note: There are various ways in which incorrect use of
              these interfaces can cause operations on the provided
              filesystem's files and directories to fail with EIO.
              Among the possible incorrect uses are:

              •  changing mode & S_IFMT for an inode that has previously
                 been reported to the kernel; or

              •  giving replies to the kernel that are shorter than what
                 the kernel expected.

       ENODEV Returned from read(2) and write(2) if the FUSE filesystem
              was unmounted.

       EPERM  Returned from operations on a /dev/fuse file descriptor
              that has not been mounted.

STANDARDS         top

       Linux.

NOTES         top

       The following messages are not yet documented in this manual
       page:

           FUSE_BATCH_FORGET
           FUSE_BMAP
           FUSE_CREATE
           FUSE_DESTROY
           FUSE_FALLOCATE
           FUSE_FORGET
           FUSE_FSYNC
           FUSE_FSYNCDIR
           FUSE_GETLK
           FUSE_GETXATTR
           FUSE_IOCTL
           FUSE_LINK
           FUSE_LISTXATTR
           FUSE_LSEEK
           FUSE_MKDIR
           FUSE_MKNOD
           FUSE_NOTIFY_REPLY
           FUSE_POLL
           FUSE_READDIRPLUS
           FUSE_READLINK
           FUSE_REMOVEXATTR
           FUSE_RENAME
           FUSE_RENAME2
           FUSE_RMDIR
           FUSE_SETATTR
           FUSE_SETLK
           FUSE_SETLKW
           FUSE_SYMLINK
           FUSE_UNLINK
           FUSE_WRITE

SEE ALSO         top

       fusermount(1), mount.fuse(8)

COLOPHON         top

       This page is part of the man-pages (Linux kernel and C library
       user-space interface documentation) project.  Information about
       the project can be found at 
       ⟨https://www.kernel.org/doc/man-pages/⟩.  If you have a bug report
       for this manual page, see
       ⟨https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/tree/CONTRIBUTING⟩.
       This page was obtained from the tarball man-pages-6.9.1.tar.gz
       fetched from
       ⟨https://mirrors.edge.kernel.org/pub/linux/docs/man-pages/⟩ on
       2024-06-26.  If you discover any rendering problems in this HTML
       version of the page, or you believe there is a better or more up-
       to-date source for the page, or you have corrections or
       improvements to the information in this COLOPHON (which is not
       part of the original manual page), send a mail to
       [email protected]

Linux man-pages 6.9.1          2024-05-02                        fuse(4)

Pages that refer to this page: fusermount3(1)fanotify_mark(2)filesystems(5)mount.fuse3(8)