Tracking issue for promoting ! to a type (RFC 1216)

[nikomatsakis]

Tracking issue for rust-lang/rfcs#1216, which promotes ! to a type.

About tracking issues

Tracking issues are used to record the overall progress of implementation. They are also used as hubs connecting to other relevant issues, e.g., bugs or open design questions. A tracking issue is however not meant for large scale discussion, questions, or bug reports about a feature. Instead, open a dedicated issue for the specific matter and add the relevant feature gate label.

Pending issues to resolve

• Regressions from fallback to () without fallback, never type introduces regressions #67225
• How to handle fallback of diverging expressions Tracking issue for fallback of diverging expressions to the never_type (!) #65992

Interesting events and links

• Initial PR Implement the ! type #35162
• Stabilization PR Stabilize ! in Rust 1.41.0 #65355
• Reverting stabilization Revert stabilization of never type #67224 due to regressions Regression in Error conversion from Infallible #66757

[canndrew]

Huzzah!

There's a WIP implementation of this here: https://github.com/canndrew/rust/tree/bang_type_coerced

It's current status is: it builds with old-trans and is usable but has a couple of failing tests. Some tests fail due to a bug that causes code like if (return) {} to crash during trans. The other tests are to do with link-time-optimization and have always been buggy for me, so I don't know if they have anything to do with my changes.

My current roadmap is:

• Get it working with MIR. This hopefully won't be too hard as this is how I started implementing it, but I've been having a problem where MIR builds segfault during compilation.
• Purge the obsolete divergence stuff from the compiler (FnOutput, FnDiverging and related).
• Hide the new type behind a feature gate. This would mean, when the feature is disabled:
  • ! can only be parsed as a type in the return position.
  • Diverging type variables default to ().
• Figure out how we can raise compatibility warnings when a defaulted () gets used to resolve a trait. One way to do this could be to add a new type to the AST called DefaultedUnit. This type behaves like () and will turn into () under some circumstances but raises a warning when it resolves a trait (as ()). The problem with this approach is I think it will be hard to catch and fix all the bugs with the implementation - we'd end up breaking people's code in order to save their code from being broken.

Is there anything that needs to be added to this list? Is it just going to be me working on this? And should this branch be moved onto the main repository?

[canndrew]

Figure out how we can raise compatibility warnings when a defaulted () gets used to resolve a trait. One way to do this could be to add a new type to the AST called DefaultedUnit. This type behaves like () and will turn into () under some circumstances but raises a warning when it resolves a trait (as ()). The problem with this approach is I think it will be hard to catch and fix all the bugs with the implementation - we'd end up breaking people's code in order to save their code from being broken.

@eddyb, @arielb1, @anyone_else: Thoughts on this approach? I'm pretty much up to this stage (sans a couple of failing tests that I'm (very slowly) trying to fix).

[tomaka]

What traits should we implement for !? The initial PR #35162 includes Ord and a few others.

Shouldn't ! automatically implement all traits?

This kind of code is fairly common:

trait Baz { ... }

trait Foo {
    type Bar: Baz;

    fn do_something(&self) -> Self::Bar;
}

I'd expect ! to be usable for Foo::Bar in order to indicate that a Bar can never actually exist:

impl Foo for MyStruct {
    type Bar = !;
    fn do_something(&self) -> ! { panic!() }
}

But this is only possible if ! implements all traits.

[suhr]

@tomaka There's RFC about it: rust-lang/rfcs#1637

The problem is that if ! implements Trait it also should implement !Trait...

[tomaka]

The problem is that if ! implements Trait it also should implement !Trait...

Then special-case ! so that it ignores any trait requirement?

[canndrew]

@tomaka ! can't automatically implement all traits because traits can have static methods and associated types/consts. It can automatically implement traits that just have non-static methods though (ie. methods that take a Self).

As for !Trait, someone suggested that ! could auto-implement both Trait and !Trait. I'm not sure whether that's sound but I suspect that negative traits aren't sound at all.

[canndrew]

But yes, it might be nice if ! could auto-implement Baz in the example you gave for precisely these sorts of cases.

[canndrew]

When exactly do we default diverging type variables to ()/! and when do we throw an error about not being able to infer enough type information? Is this specified anywhere? I'd like to be able to compile the following code:

let Ok(x) = Ok("hello");

But the first error I get is "unable to infer enough type information about _". In this case I think it would make sense for _ to default to !. However when I was writing tests around defaulting behaviour I found it surprisingly difficult to make a type variable default. That's why these tests are so convoluted.

I'd like to have a clear idea of exactly why we have this defaulting behaviour and when it's supposed to get invoked.

[tomaka]

But the first error I get is "unable to infer enough type information about _". In this case I think it would make sense for _ to default to !. However when I was writing tests around defaulting behaviour I found it surprisingly difficult to make a type variable default. That's why these tests are so convoluted.

That's a very good idea in my opinion. Same for None which would default to Option<!> for example.

[arielb1]

@carllerche

The unit_fallback test is certainly an odd way to demonstrate it. A less-macro-ey version is

trait Balls: Default {}
impl Balls for () {}

struct Flah;

impl Flah {
    fn flah<T: Balls>(&self) -> T {
        Default::default()
    }
}

fn doit(cond: bool) {
    let _ = if cond {
        Flah.flah()
    } else {
        return
    };
}

fn main() {
    let _ = doit(true);
}

Only the type variable created by return/break/panic!() defaults to anything.

[nikomatsakis]

When exactly do we default diverging type variables to ()/! and when do we throw an error about not being able to infer enough type information? Is this specified anywhere?

Define "specified". :) The answer is that certain operations, which are not afaik written down anywhere outside the code, require that the type is known at that point. The most common case is field access (.f) and method dispatch (.f()), but another example is deref (*x), and there is probably one or two more. There are mostly decent reasons for this being required -- generally speaking, there are multiple diverging ways to proceed, and we can't make progress without knowing which one to take. (It would be possible, potentially, to refactor the code so that this need can be registered as a kind of "pending obligation", but it's complicated to do so.)

If you make it all the way to the end of the fn, then we run all pending trait selection operations until a steady state is reached. This is the point where defaults (e.g., i32, etc) are applied. This last part is described in the RFC talking about user-specified default type parameters (though that RFC in general needs work).

[canndrew]

#36011
#36038
#35940

Are some bugs to add to the list of pending issues.

[glaebhoerl]

@canndrew those look a bit similar to #12609

[canndrew]

Boy, that's an old bug! But yes I'd say my #36038 is a dupe of that (I thought I'd seen it somewhere before). I don't think ! can really be considered for prime time until that's fixed.

[tikue]

Is it planned for ! to affect pattern matching exhaustiveness? Example of current, possibly-wrong behavior:

#![feature(never_type)]

fn main() {
    let result: Result<_, !> = Ok(1);
    match result {
//        ^^^^^^ pattern `Err(_)` not covered
        Ok(i) => println!("{}", i),
    }
}

[lambda-fairy]

@tikue yes, it's one of the bugs listed above.

[bjorn3]

The second issue was actually closed in favor of this issue. In other words, the actual problem wasn't fixed yet, but it wasn't seen as worthwhile to have a issue separate from this one tracking the problem.

[Ciel-MC]

Im not quite grasping what the problem is, and there didn’t seem to be an example in the original issue, is there perhaps a concrete example somewhere?

[slanterns]

Im not quite grasping what the problem is, and there didn’t seem to be an example in the original issue, is there perhaps a concrete example somewhere?

#67225 (comment)

#66757 (comment)

[TheLostLambda]

I might also cross-link this to #64715, which should at least be partially unblocked by the stabilization of ! here!

Once type Infallible = !, then fixing #64715 will finally mean I don't have to write silly code like the below!

impl From<Infallible> for AtomicLookupError {
    fn from(_: Infallible) -> Self {
        unreachable!()
    }
}

[WaffleLapkin]

@TheLostLambda the most recent update I've heard from T-types is that making an impl<T> From<!> for T { ... } is not possible with the current state of the trait solver (as it does not have a way to handle overlapping impls like that), so I wouldn't get your hopes up too much.

[coolCucumber-cat]

What issues are holding this up right now? All the issues about bugs seem to be closed now, what do we still need to do?

One use case for this would be when you have multiple fallible try_into conversions but when one of them may not actually be fallible. In that case, the error type for the infallible conversions is Infallible and the fallible ones are something else, so it doesn't work.

[WaffleLapkin]

I just realized that I never posted an update here, oops.

For the last couple of months I was working on moving the never type forward. In collaboration with the language team we found & agreed on the path towards stabilizing the never type (you can read meeting notes for meeting 1 and meeting 2).

The main problem is that we really want to change "never type fallback", but it is a breaking change. Moreover, it can make code which compiled fine, into code that has UB. I found a way to lint against most/all of such cases and it was implemented in #123939.

The first step of our plan is tracked in #123748 -- we want to change fallback on the next edition, so that code written for it is never broken. At a later date we'll make the switch for all editions, and then we'll be able to stabilize !

[orium]

Thanks for the update.

it can make code which compiled fine, into code that has UB.

That sounds quite scary. Can you elaborate on it? (From the lint PR it seems it only affects unsafe code?)

[WaffleLapkin]

@orium inferring a different type of a call to an unsafe function can cause UB, see example. This is indeed quite scary and why this issue was blocked for so long.

[bp-galopin]

Hi, stumble into a case that the never type appears to be the solution for me but the never documentation does not mention that use case, so would it be a proper case for it ?

pub trait FuncTrait: Fn() {}
fn foo::<Func : FuncTrait>( func: Option<Func>) {}
// and at use site:
foo( None ); // <-- cannot satisfy `_: FuncTrait`  
foo::<!>( None ); // I think would work, but I am running stable, and never doc mention it is only for return types, so ?

Unless there is a different way to have rust figured the type is not be constructed and does not need to be known ?

[Ciel-MC]

Hi, stumble into a case that the never type appears to be the solution for me but the never documentation does not mention that use case, so would it be a proper case for it ?

pub trait FuncTrait: Fn() {}
fn foo::<Func : FuncTrait>( func: Option<Func>) {}
// and at use site:
foo( None ); // <-- cannot satisfy `_: FuncTrait`  
foo::<!>( None ); // I think would work, but I am running stable, and never doc mention it is only for return types, so ?

Unless there is a different way to have rust figured the type is not be constructed and does not need to be known ?

I think it would work? You can use the never say never crate to hack the real ! into existence on stable, just to verify if it works, just as a heads up, it’s not on stable for a reason.

[2xsaiko]

@bp-galopin You can use the enum std::convert::Infallible for the same purpose right now. Keep in mind that you have to implement FuncTrait for Infallible first, but IIRC that would be the case for ! as well as of right now.

[HotoRas]

Could I get some updates from this?

[traviscross]

The plan, as FCPed here, is to:

1. Change fallback to ! in Rust 2024 (details of this elided as this work is done).
   • Tracking Issue for Rust 2024: Make ! fall back to ! #123748
2. Stabilize Rust 2024.
3. At a later date when 2024 edition adoption is widespread:
   • Make the breaking change to fall back to ! always everywhere.
   • Change Infallible = !.
   • Stabilize ! (!).

Rust 2024 is expected to be released in Q1 2025. We're not sure how long step 3 will take after that.

See the draft edition guide chapter for further background here:

https://doc.rust-lang.org/nightly/edition-guide/rust-2024/never-type-fallback.html

[HotoRas]

Rust 2024 is expected to stabilize in Q1 2025. We're not sure how long step 3 will take after that.

Checked, faster than expected

[Kixunil]

I have some questions regarding 3).

• Make the breaking change to fall back to ! always everywhere.

This is a breaking change isn't it? It looks like it could also produce unsoundness in unsafe code. Doesn't it break Rust's stability guarantees?

• Change Infallible = !.

Why does it have to wait until widespread 2024 adoption?

• Stabilize ! (!).

How can the fallback change without stabilizing in the first place? And why can't it be stabilized with edition 2024 release?

[WaffleLapkin]

@Kixunil

This is a breaking change isn't it? It looks like it could also produce unsoundness in unsafe code. Doesn't it break Rust's stability guarantees?

Yes, it is a breaking change. Yes it can produce unsoundness in unsafe code, however note that we have a lint such unsoundness which is also reported in deps. No, it does not break Rust's stability guarantees, technically Rust permits inference changes (still, this is not something to take lightly, we are trying to take all imaginable precautions to make sure it's as light change as it can be).

How can the fallback change without stabilizing in the first place?

We can just do it. Not sure what to add here.

And why can't it be stabilized with edition 2024 release?

Language team fears the sudden change will break too many things, as planned, we are providing a grace period for everyone affected to patch their code, while making e2024 have the semantics we want from the start.

Why does it have to wait until widespread 2024 adoption?

Infallible = ! and stabilization of ! must happen in the same release (otherwise it would de-stabilize Infallible or make it observable that they are different types).

If you want to learn more, please read recording of T-lang design meeting about the never type, and then a second discussion of some details.

[Kixunil]

@WaffleLapkin Thanks for explaining! In particular, the design meeting recording convinced me this is likely the least bad option. I'm just not sure if the lint is 100% reliable since if it isn't it can be a huge problem.

[compiler-errors]

@Seidko, and others who are interested in reporting bugs:

Please open a separate bug if you think there is a bug with the never type implementation. This tracking issue does not say it since it likely precedes its inclusion in other tracking issues, but

Tracking issues are used to record the overall progress of implementation. They are also used as hubs connecting to other relevant issues, e.g., bugs or open design questions. A tracking issue is however not meant for large scale discussion, questions, or bug reports about a feature. Instead, open a dedicated issue for the specific matter and add the relevant feature gate label.