In a previous role, I spent a lot of time working on CAD tasks that could feel really repetitive, like tweaking the same designs over and over. At some point, I realized I needed to find ways to keep it interesting, or I’d burn out. So, I started breaking things down into smaller steps—each little win kept me going. I’d also mix it up by shifting to different types of tasks whenever I could, just to keep things fresh. And to make it feel more purposeful, I set some goals for myself, like learning new shortcuts or tools to get faster at what I was doing. It really helped me stay motivated and feel like I was still growing, even on the most routine days.

Es muy importante alternar intervalos de construcción 3D/2D, donde las actividades tienen un carácter más mecánico, con intervalos de diseño, donde es necesario dar rienda suelta a la imaginación y disponer de tiempo para pensar. De este modo, al mantener ocupada la mente con actividades de distinta naturaleza, descansamos, y hace el proceso de diseño y construcción CAD mucho más llevadero. Por último, tener siempre en mente que lo que hacemos no se va a quedar dentro de la pantalla, si no que se materializará en una pieza, o conjunto físico, a mí esto último personalmente me sirve como una fuente de motivación.

Using the concept of modularity in the design assists in reducing the repetitiveness of the cad design . Leaving more time on improving and modify existing designs which already have market traction unless the project involves designing the product from ground up which add to the complexity of making it compatible with the existing manufacturing constraints and creating challenges depending on the size of organization different approaches could be explored small company can explore different design and find a product design that helps them establish their market presence in case of an already established organization the goal is to improve on existing design as resources have already been spent to make that product a market fit .

Cette problématique me rappelle à l'esprit cette histoire: Lors d’un projet surnommé ironiquement "le Burj", j’ai proposé quatre variantes pour un même programme, rendant le processus de conception très fastidieux. Grâce à l’automatisation des tâches et à la synchronisation des outils, j’ai simplifié la mise en page des plans et allégé le travail. Pour éviter d’être submergé par des tâches répétitives, je recommande : 1.Commencer par des croquis ou esquisses à la main, pour une exploration rapide des idées. 2. Configurer les logiciels avec des paramètres automatisés et gérer les calques efficacement, pour optimiser les processus. 3. Analyser les attentes du client en amont, afin de réduire les ajustements nécessaires.

Probably this could appear a little strange but I find CAD design always relaxing against my current role, so I switch to design as soon as I can. Clearly there are some repetitive tasks that in the long run are tedious but there is always some clever way to automatize or avoid completely. Clearly I look forward to any improvement on this matter.

When I commence a new project associated with large numbers of CAD drawings, I will look at the big picture first in order to identify common areas. I will then design on the basis of "worst case scenario" so that every option is included in the design template (or templates). I find this method works really well since it is then possible to copy the most complex template across the total number of systems (or modules). Any modifications required to individual copies is usually a matter of deleting the items not required. It is so much faster to delete items which are not from a set of drawings rather than having to add items individually. In other words, time is spent getting a complete template correct before detailing.

Use o design a seu favor. Decore o máximo de comandos possíveis e comece a se superar a cada dia na eficiência do tempo, qualidade, diminuindo o retrabalho e aprenda sempre comandos novos que facilite o seu desenho. Assim sua capacidade técnica de desenho te oferecerá maiores oportunidades de criação e abrirá muitas portas.

In a previous role that worked in, I found creating blocks for 2D electrical auto cad files was helpful and reduce some of the day-to-day repetitiveness. In doing so it gave me more satisfaction and allows me to improve on release of drawings.

Understanding the value behind each task and why you are doing a certain task can be really motivating. It depends on an individual's characteristics. We should think rationally about our position and the efforts we make in various ways. For example, as a mechanical engineer, I take pride in designing precise tools or fixtures that consume fewer materials and exhibit high precision. In the long term, I can see that my career has a significant impact on the energy industry, which I consider an honor. These kinds of achievements always motivate me in my career.

Electrical design is a field that thrives on curiosity. This could mean reading about smart grids, renewable energy systems, or even the intricacies of electronic gadgets. Designing is something which we can't do anything else which is not making us clearly Satisfied for our work... ,, References are the best friends at this time, In my previous job I used to spent a lot of time on CAD design, whenever I have a pile of urgent work I used to take references from previous similar projects.