|
|
Search Results
There are 7798 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2024-50262 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds write in trie_get_next_key() trie_get_next_key() allocates a node stack with size trie->max_prefixlen, while it writes (trie->max_prefixlen + 1) nodes to the stack when it has full paths from the root to leaves. For example, consider a trie with max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ... 0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with .prefixlen = 8 make 9 nodes be written on the node stack with size 8. |
| CVE-2024-50261 | In the Linux kernel, the following vulnerability has been resolved: macsec: Fix use-after-free while sending the offloading packet KASAN reports the following UAF. The metadata_dst, which is used to store the SCI value for macsec offload, is already freed by metadata_dst_free() in macsec_free_netdev(), while driver still use it for sending the packet. To fix this issue, dst_release() is used instead to release metadata_dst. So it is not freed instantly in macsec_free_netdev() if still referenced by skb. BUG: KASAN: slab-use-after-free in mlx5e_xmit+0x1e8f/0x4190 [mlx5_core] Read of size 2 at addr ffff88813e42e038 by task kworker/7:2/714 [...] Workqueue: mld mld_ifc_work Call Trace: <TASK> dump_stack_lvl+0x51/0x60 print_report+0xc1/0x600 kasan_report+0xab/0xe0 mlx5e_xmit+0x1e8f/0x4190 [mlx5_core] dev_hard_start_xmit+0x120/0x530 sch_direct_xmit+0x149/0x11e0 __qdisc_run+0x3ad/0x1730 __dev_queue_xmit+0x1196/0x2ed0 vlan_dev_hard_start_xmit+0x32e/0x510 [8021q] dev_hard_start_xmit+0x120/0x530 __dev_queue_xmit+0x14a7/0x2ed0 macsec_start_xmit+0x13e9/0x2340 dev_hard_start_xmit+0x120/0x530 __dev_queue_xmit+0x14a7/0x2ed0 ip6_finish_output2+0x923/0x1a70 ip6_finish_output+0x2d7/0x970 ip6_output+0x1ce/0x3a0 NF_HOOK.constprop.0+0x15f/0x190 mld_sendpack+0x59a/0xbd0 mld_ifc_work+0x48a/0xa80 process_one_work+0x5aa/0xe50 worker_thread+0x79c/0x1290 kthread+0x28f/0x350 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x11/0x20 </TASK> Allocated by task 3922: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 __kasan_kmalloc+0x77/0x90 __kmalloc_noprof+0x188/0x400 metadata_dst_alloc+0x1f/0x4e0 macsec_newlink+0x914/0x1410 __rtnl_newlink+0xe08/0x15b0 rtnl_newlink+0x5f/0x90 rtnetlink_rcv_msg+0x667/0xa80 netlink_rcv_skb+0x12c/0x360 netlink_unicast+0x551/0x770 netlink_sendmsg+0x72d/0xbd0 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x52e/0x6a0 ___sys_sendmsg+0xeb/0x170 __sys_sendmsg+0xb5/0x140 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 4011: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x50 poison_slab_object+0x10c/0x190 __kasan_slab_free+0x11/0x30 kfree+0xe0/0x290 macsec_free_netdev+0x3f/0x140 netdev_run_todo+0x450/0xc70 rtnetlink_rcv_msg+0x66f/0xa80 netlink_rcv_skb+0x12c/0x360 netlink_unicast+0x551/0x770 netlink_sendmsg+0x72d/0xbd0 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x52e/0x6a0 ___sys_sendmsg+0xeb/0x170 __sys_sendmsg+0xb5/0x140 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| CVE-2024-50260 | In the Linux kernel, the following vulnerability has been resolved: sock_map: fix a NULL pointer dereference in sock_map_link_update_prog() The following race condition could trigger a NULL pointer dereference: sock_map_link_detach(): sock_map_link_update_prog(): mutex_lock(&sockmap_mutex); ... sockmap_link->map = NULL; mutex_unlock(&sockmap_mutex); mutex_lock(&sockmap_mutex); ... sock_map_prog_link_lookup(sockmap_link->map); mutex_unlock(&sockmap_mutex); <continue> Fix it by adding a NULL pointer check. In this specific case, it makes no sense to update a link which is being released. |
| CVE-2024-50259 | In the Linux kernel, the following vulnerability has been resolved: netdevsim: Add trailing zero to terminate the string in nsim_nexthop_bucket_activity_write() This was found by a static analyzer. We should not forget the trailing zero after copy_from_user() if we will further do some string operations, sscanf() in this case. Adding a trailing zero will ensure that the function performs properly. |
| CVE-2024-50258 | In the Linux kernel, the following vulnerability has been resolved: net: fix crash when config small gso_max_size/gso_ipv4_max_size Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow in sk_dst_gso_max_size(), which may trigger a BUG_ON crash, because sk->sk_gso_max_size would be much bigger than device limits. Call Trace: tcp_write_xmit tso_segs = tcp_init_tso_segs(skb, mss_now); tcp_set_skb_tso_segs tcp_skb_pcount_set // skb->len = 524288, mss_now = 8 // u16 tso_segs = 524288/8 = 65535 -> 0 tso_segs = DIV_ROUND_UP(skb->len, mss_now) BUG_ON(!tso_segs) Add check for the minimum value of gso_max_size and gso_ipv4_max_size. |
| CVE-2024-50257 | In the Linux kernel, the following vulnerability has been resolved: netfilter: Fix use-after-free in get_info() ip6table_nat module unload has refcnt warning for UAF. call trace is: WARNING: CPU: 1 PID: 379 at kernel/module/main.c:853 module_put+0x6f/0x80 Modules linked in: ip6table_nat(-) CPU: 1 UID: 0 PID: 379 Comm: ip6tables Not tainted 6.12.0-rc4-00047-gc2ee9f594da8-dirty #205 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:module_put+0x6f/0x80 Call Trace: <TASK> get_info+0x128/0x180 do_ip6t_get_ctl+0x6a/0x430 nf_getsockopt+0x46/0x80 ipv6_getsockopt+0xb9/0x100 rawv6_getsockopt+0x42/0x190 do_sock_getsockopt+0xaa/0x180 __sys_getsockopt+0x70/0xc0 __x64_sys_getsockopt+0x20/0x30 do_syscall_64+0xa2/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Concurrent execution of module unload and get_info() trigered the warning. The root cause is as follows: cpu0 cpu1 module_exit //mod->state = MODULE_STATE_GOING ip6table_nat_exit xt_unregister_template kfree(t) //removed from templ_list getinfo() t = xt_find_table_lock list_for_each_entry(tmpl, &xt_templates[af]...) if (strcmp(tmpl->name, name)) continue; //table not found try_module_get list_for_each_entry(t, &xt_net->tables[af]...) return t; //not get refcnt module_put(t->me) //uaf unregister_pernet_subsys //remove table from xt_net list While xt_table module was going away and has been removed from xt_templates list, we couldnt get refcnt of xt_table->me. Check module in xt_net->tables list re-traversal to fix it. |
| CVE-2024-50256 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6() I got a syzbot report without a repro [1] crashing in nf_send_reset6() I think the issue is that dev->hard_header_len is zero, and we attempt later to push an Ethernet header. Use LL_MAX_HEADER, as other functions in net/ipv6/netfilter/nf_reject_ipv6.c. [1] skbuff: skb_under_panic: text:ffffffff89b1d008 len:74 put:14 head:ffff88803123aa00 data:ffff88803123a9f2 tail:0x3c end:0x140 dev:syz_tun kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 7373 Comm: syz.1.568 Not tainted 6.12.0-rc2-syzkaller-00631-g6d858708d465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0d 8d 48 c7 c6 60 a6 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 ba 30 38 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc900045269b0 EFLAGS: 00010282 RAX: 0000000000000088 RBX: dffffc0000000000 RCX: cd66dacdc5d8e800 RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000000 RBP: ffff88802d39a3d0 R08: ffffffff8174afec R09: 1ffff920008a4ccc R10: dffffc0000000000 R11: fffff520008a4ccd R12: 0000000000000140 R13: ffff88803123aa00 R14: ffff88803123a9f2 R15: 000000000000003c FS: 00007fdbee5ff6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000005d322000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 eth_header+0x38/0x1f0 net/ethernet/eth.c:83 dev_hard_header include/linux/netdevice.h:3208 [inline] nf_send_reset6+0xce6/0x1270 net/ipv6/netfilter/nf_reject_ipv6.c:358 nft_reject_inet_eval+0x3b9/0x690 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x418/0x6b0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] br_nf_pre_routing_ipv6+0x63e/0x770 net/bridge/br_netfilter_ipv6.c:184 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_bridge_pre net/bridge/br_input.c:277 [inline] br_handle_frame+0x9fd/0x1530 net/bridge/br_input.c:424 __netif_receive_skb_core+0x13e8/0x4570 net/core/dev.c:5562 __netif_receive_skb_one_core net/core/dev.c:5666 [inline] __netif_receive_skb+0x12f/0x650 net/core/dev.c:5781 netif_receive_skb_internal net/core/dev.c:5867 [inline] netif_receive_skb+0x1e8/0x890 net/core/dev.c:5926 tun_rx_batched+0x1b7/0x8f0 drivers/net/tun.c:1550 tun_get_user+0x3056/0x47e0 drivers/net/tun.c:2007 tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2053 new_sync_write fs/read_write.c:590 [inline] vfs_write+0xa6d/0xc90 fs/read_write.c:683 ksys_write+0x183/0x2b0 fs/read_write.c:736 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fdbeeb7d1ff Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 c9 8d 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 1c 8e 02 00 48 RSP: 002b:00007fdbee5ff000 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fdbeed36058 RCX: 00007fdbeeb7d1ff RDX: 000000000000008e RSI: 0000000020000040 RDI: 00000000000000c8 RBP: 00007fdbeebf12be R08: 0000000 ---truncated--- |
| CVE-2024-50255 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes. __hci_cmd_sync_sk() returns NULL if a command returns a status event. However, it also returns NULL where an opcode doesn't exist in the hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0] for unknown opcodes. This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes status = skb->data[0]. KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci7 hci_power_on RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138 Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78 RSP: 0018:ffff888120bafac8 EFLAGS: 00010212 RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040 RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4 RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054 R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000 FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> hci_read_local_codecs_sync net/bluetooth/hci_sync.c:4546 [inline] hci_init_stage_sync net/bluetooth/hci_sync.c:3441 [inline] hci_init4_sync net/bluetooth/hci_sync.c:4706 [inline] hci_init_sync net/bluetooth/hci_sync.c:4742 [inline] hci_dev_init_sync net/bluetooth/hci_sync.c:4912 [inline] hci_dev_open_sync+0x19a9/0x2d30 net/bluetooth/hci_sync.c:4994 hci_dev_do_open net/bluetooth/hci_core.c:483 [inline] hci_power_on+0x11e/0x560 net/bluetooth/hci_core.c:1015 process_one_work kernel/workqueue.c:3267 [inline] process_scheduled_works+0x8ef/0x14f0 kernel/workqueue.c:3348 worker_thread+0x91f/0xe50 kernel/workqueue.c:3429 kthread+0x2cb/0x360 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 |
| CVE-2024-50254 | In the Linux kernel, the following vulnerability has been resolved: bpf: Free dynamically allocated bits in bpf_iter_bits_destroy() bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the bits are dynamically allocated. However, the check is incorrect and may cause a kmemleak as shown below: unreferenced object 0xffff88812628c8c0 (size 32): comm "swapper/0", pid 1, jiffies 4294727320 hex dump (first 32 bytes): b0 c1 55 f5 81 88 ff ff f0 f0 f0 f0 f0 f0 f0 f0 ..U........... f0 f0 f0 f0 f0 f0 f0 f0 00 00 00 00 00 00 00 00 .............. backtrace (crc 781e32cc): [<00000000c452b4ab>] kmemleak_alloc+0x4b/0x80 [<0000000004e09f80>] __kmalloc_node_noprof+0x480/0x5c0 [<00000000597124d6>] __alloc.isra.0+0x89/0xb0 [<000000004ebfffcd>] alloc_bulk+0x2af/0x720 [<00000000d9c10145>] prefill_mem_cache+0x7f/0xb0 [<00000000ff9738ff>] bpf_mem_alloc_init+0x3e2/0x610 [<000000008b616eac>] bpf_global_ma_init+0x19/0x30 [<00000000fc473efc>] do_one_initcall+0xd3/0x3c0 [<00000000ec81498c>] kernel_init_freeable+0x66a/0x940 [<00000000b119f72f>] kernel_init+0x20/0x160 [<00000000f11ac9a7>] ret_from_fork+0x3c/0x70 [<0000000004671da4>] ret_from_fork_asm+0x1a/0x30 That is because nr_bits will be set as zero in bpf_iter_bits_next() after all bits have been iterated. Fix the issue by setting kit->bit to kit->nr_bits instead of setting kit->nr_bits to zero when the iteration completes in bpf_iter_bits_next(). In addition, use "!nr_bits || bits >= nr_bits" to check whether the iteration is complete and still use "nr_bits > 64" to indicate whether bits are dynamically allocated. The "!nr_bits" check is necessary because bpf_iter_bits_new() may fail before setting kit->nr_bits, and this condition will stop the iteration early instead of accessing the zeroed or freed kit->bits. Considering the initial value of kit->bits is -1 and the type of kit->nr_bits is unsigned int, change the type of kit->nr_bits to int. The potential overflow problem will be handled in the following patch. |
| CVE-2024-50253 | In the Linux kernel, the following vulnerability has been resolved: bpf: Check the validity of nr_words in bpf_iter_bits_new() Check the validity of nr_words in bpf_iter_bits_new(). Without this check, when multiplication overflow occurs for nr_bits (e.g., when nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008). Fix it by limiting the maximum value of nr_words to 511. The value is derived from the current implementation of BPF memory allocator. To ensure compatibility if the BPF memory allocator's size limitation changes in the future, use the helper bpf_mem_alloc_check_size() to check whether nr_bytes is too larger. And return -E2BIG instead of -ENOMEM for oversized nr_bytes. |
| CVE-2024-50252 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address The device stores IPv6 addresses that are used for encapsulation in linear memory that is managed by the driver. Changing the remote address of an ip6gre net device never worked properly, but since cited commit the following reproducer [1] would result in a warning [2] and a memory leak [3]. The problem is that the new remote address is never added by the driver to its hash table (and therefore the device) and the old address is never removed from it. Fix by programming the new address when the configuration of the ip6gre net device changes and removing the old one. If the address did not change, then the above would result in increasing the reference count of the address and then decreasing it. [1] # ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit # ip link set dev bla type ip6gre remote 2001:db8:3::1 # ip link del dev bla # devlink dev reload pci/0000:01:00.0 [2] WARNING: CPU: 0 PID: 1682 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3002 mlxsw_sp_ipv6_addr_put+0x140/0x1d0 Modules linked in: CPU: 0 UID: 0 PID: 1682 Comm: ip Not tainted 6.12.0-rc3-custom-g86b5b55bc835 #151 Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 RIP: 0010:mlxsw_sp_ipv6_addr_put+0x140/0x1d0 [...] Call Trace: <TASK> mlxsw_sp_router_netdevice_event+0x55f/0x1240 notifier_call_chain+0x5a/0xd0 call_netdevice_notifiers_info+0x39/0x90 unregister_netdevice_many_notify+0x63e/0x9d0 rtnl_dellink+0x16b/0x3a0 rtnetlink_rcv_msg+0x142/0x3f0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x242/0x390 netlink_sendmsg+0x1de/0x420 ____sys_sendmsg+0x2bd/0x320 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xd0 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [3] unreferenced object 0xffff898081f597a0 (size 32): comm "ip", pid 1626, jiffies 4294719324 hex dump (first 32 bytes): 20 01 0d b8 00 02 00 00 00 00 00 00 00 00 00 01 ............... 21 49 61 83 80 89 ff ff 00 00 00 00 01 00 00 00 !Ia............. backtrace (crc fd9be911): [<00000000df89c55d>] __kmalloc_cache_noprof+0x1da/0x260 [<00000000ff2a1ddb>] mlxsw_sp_ipv6_addr_kvdl_index_get+0x281/0x340 [<000000009ddd445d>] mlxsw_sp_router_netdevice_event+0x47b/0x1240 [<00000000743e7757>] notifier_call_chain+0x5a/0xd0 [<000000007c7b9e13>] call_netdevice_notifiers_info+0x39/0x90 [<000000002509645d>] register_netdevice+0x5f7/0x7a0 [<00000000c2e7d2a9>] ip6gre_newlink_common.isra.0+0x65/0x130 [<0000000087cd6d8d>] ip6gre_newlink+0x72/0x120 [<000000004df7c7cc>] rtnl_newlink+0x471/0xa20 [<0000000057ed632a>] rtnetlink_rcv_msg+0x142/0x3f0 [<0000000032e0d5b5>] netlink_rcv_skb+0x50/0x100 [<00000000908bca63>] netlink_unicast+0x242/0x390 [<00000000cdbe1c87>] netlink_sendmsg+0x1de/0x420 [<0000000011db153e>] ____sys_sendmsg+0x2bd/0x320 [<000000003b6d53eb>] ___sys_sendmsg+0x9a/0xe0 [<00000000cae27c62>] __sys_sendmsg+0x7a/0xd0 |
| CVE-2024-50251 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: sanitize offset and length before calling skb_checksum() If access to offset + length is larger than the skbuff length, then skb_checksum() triggers BUG_ON(). skb_checksum() internally subtracts the length parameter while iterating over skbuff, BUG_ON(len) at the end of it checks that the expected length to be included in the checksum calculation is fully consumed. |
| CVE-2024-50250 | In the Linux kernel, the following vulnerability has been resolved: fsdax: dax_unshare_iter needs to copy entire blocks The code that copies data from srcmap to iomap in dax_unshare_iter is very very broken, which bfoster's recent fsx changes have exposed. If the pos and len passed to dax_file_unshare are not aligned to an fsblock boundary, the iter pos and length in the _iter function will reflect this unalignment. dax_iomap_direct_access always returns a pointer to the start of the kmapped fsdax page, even if its pos argument is in the middle of that page. This is catastrophic for data integrity when iter->pos is not aligned to a page, because daddr/saddr do not point to the same byte in the file as iter->pos. Hence we corrupt user data by copying it to the wrong place. If iter->pos + iomap_length() in the _iter function not aligned to a page, then we fail to copy a full block, and only partially populate the destination block. This is catastrophic for data confidentiality because we expose stale pmem contents. Fix both of these issues by aligning copy_pos/copy_len to a page boundary (remember, this is fsdax so 1 fsblock == 1 base page) so that we always copy full blocks. We're not done yet -- there's no call to invalidate_inode_pages2_range, so programs that have the file range mmap'd will continue accessing the old memory mapping after the file metadata updates have completed. Be careful with the return value -- if the unshare succeeds, we still need to return the number of bytes that the iomap iter thinks we're operating on. |
| CVE-2024-50249 | In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Make rmw_lock a raw_spin_lock The following BUG was triggered: ============================= [ BUG: Invalid wait context ] 6.12.0-rc2-XXX #406 Not tainted ----------------------------- kworker/1:1/62 is trying to lock: ffffff8801593030 (&cpc_ptr->rmw_lock){+.+.}-{3:3}, at: cpc_write+0xcc/0x370 other info that might help us debug this: context-{5:5} 2 locks held by kworker/1:1/62: #0: ffffff897ef5ec98 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x2c/0x50 #1: ffffff880154e238 (&sg_policy->update_lock){....}-{2:2}, at: sugov_update_shared+0x3c/0x280 stack backtrace: CPU: 1 UID: 0 PID: 62 Comm: kworker/1:1 Not tainted 6.12.0-rc2-g9654bd3e8806 #406 Workqueue: 0x0 (events) Call trace: dump_backtrace+0xa4/0x130 show_stack+0x20/0x38 dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x28 __lock_acquire+0x480/0x1ad8 lock_acquire+0x114/0x310 _raw_spin_lock+0x50/0x70 cpc_write+0xcc/0x370 cppc_set_perf+0xa0/0x3a8 cppc_cpufreq_fast_switch+0x40/0xc0 cpufreq_driver_fast_switch+0x4c/0x218 sugov_update_shared+0x234/0x280 update_load_avg+0x6ec/0x7b8 dequeue_entities+0x108/0x830 dequeue_task_fair+0x58/0x408 __schedule+0x4f0/0x1070 schedule+0x54/0x130 worker_thread+0xc0/0x2e8 kthread+0x130/0x148 ret_from_fork+0x10/0x20 sugov_update_shared() locks a raw_spinlock while cpc_write() locks a spinlock. To have a correct wait-type order, update rmw_lock to a raw spinlock and ensure that interrupts will be disabled on the CPU holding it. [ rjw: Changelog edits ] |
| CVE-2024-50248 | In the Linux kernel, the following vulnerability has been resolved: ntfs3: Add bounds checking to mi_enum_attr() Added bounds checking to make sure that every attr don't stray beyond valid memory region. |
| CVE-2024-50247 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Check if more than chunk-size bytes are written A incorrectly formatted chunk may decompress into more than LZNT_CHUNK_SIZE bytes and a index out of bounds will occur in s_max_off. |
| CVE-2024-50246 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add rough attr alloc_size check |
| CVE-2024-50245 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix possible deadlock in mi_read Mutex lock with another subclass used in ni_lock_dir(). |
| CVE-2024-50244 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Additional check in ni_clear() Checking of NTFS_FLAGS_LOG_REPLAYING added to prevent access to uninitialized bitmap during replay process. |
| CVE-2024-50243 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix general protection fault in run_is_mapped_full Fixed deleating of a non-resident attribute in ntfs_create_inode() rollback. |
| CVE-2024-50242 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Additional check in ntfs_file_release |
| CVE-2024-50241 | In the Linux kernel, the following vulnerability has been resolved: NFSD: Initialize struct nfsd4_copy earlier Ensure the refcount and async_copies fields are initialized early. cleanup_async_copy() will reference these fields if an error occurs in nfsd4_copy(). If they are not correctly initialized, at the very least, a refcount underflow occurs. |
| CVE-2024-50240 | In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with this driver. |
| CVE-2024-50239 | In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usb-legacy driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers. |
| CVE-2024-50238 | In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usbc driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers. |
| CVE-2024-50237 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower Avoid potentially crashing in the driver because of uninitialized private data |
| CVE-2024-50236 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: Fix memory leak in management tx In the current logic, memory is allocated for storing the MSDU context during management packet TX but this memory is not being freed during management TX completion. Similar leaks are seen in the management TX cleanup logic. Kmemleak reports this problem as below, unreferenced object 0xffffff80b64ed250 (size 16): comm "kworker/u16:7", pid 148, jiffies 4294687130 (age 714.199s) hex dump (first 16 bytes): 00 2b d8 d8 80 ff ff ff c4 74 e9 fd 07 00 00 00 .+.......t...... backtrace: [<ffffffe6e7b245dc>] __kmem_cache_alloc_node+0x1e4/0x2d8 [<ffffffe6e7adde88>] kmalloc_trace+0x48/0x110 [<ffffffe6bbd765fc>] ath10k_wmi_tlv_op_gen_mgmt_tx_send+0xd4/0x1d8 [ath10k_core] [<ffffffe6bbd3eed4>] ath10k_mgmt_over_wmi_tx_work+0x134/0x298 [ath10k_core] [<ffffffe6e78d5974>] process_scheduled_works+0x1ac/0x400 [<ffffffe6e78d60b8>] worker_thread+0x208/0x328 [<ffffffe6e78dc890>] kthread+0x100/0x1c0 [<ffffffe6e78166c0>] ret_from_fork+0x10/0x20 Free the memory during completion and cleanup to fix the leak. Protect the mgmt_pending_tx idr_remove() operation in ath10k_wmi_tlv_op_cleanup_mgmt_tx_send() using ar->data_lock similar to other instances. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 |
| CVE-2024-50235 | In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: clear wdev->cqm_config pointer on free When we free wdev->cqm_config when unregistering, we also need to clear out the pointer since the same wdev/netdev may get re-registered in another network namespace, then destroyed later, running this code again, which results in a double-free. |
| CVE-2024-50234 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: Clear stale interrupts before resuming device iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 0 ---truncated--- |
| CVE-2024-50233 | In the Linux kernel, the following vulnerability has been resolved: staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg() In the ad9832_write_frequency() function, clk_get_rate() might return 0. This can lead to a division by zero when calling ad9832_calc_freqreg(). The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect against the case when fout is 0. The ad9832_write_frequency() function is called from ad9832_write(), and fout is derived from a text buffer, which can contain any value. |
| CVE-2024-50232 | In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr() In the ad7124_write_raw() function, parameter val can potentially be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST() is called within ad7124_set_channel_odr(). The ad7124_write_raw() function is invoked through the sequence: iio_write_channel_raw() -> iio_write_channel_attribute() -> iio_channel_write(), with no checks in place to ensure val is non-zero. |
| CVE-2024-50231 | In the Linux kernel, the following vulnerability has been resolved: iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table() modprobe iio-test-gts and rmmod it, then the following memory leak occurs: unreferenced object 0xffffff80c810be00 (size 64): comm "kunit_try_catch", pid 1654, jiffies 4294913981 hex dump (first 32 bytes): 02 00 00 00 08 00 00 00 20 00 00 00 40 00 00 00 ........ ...@... 80 00 00 00 00 02 00 00 00 04 00 00 00 08 00 00 ................ backtrace (crc a63d875e): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000000315bc18>] 0xffffffdf052a6488 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cbfe9e70 (size 16): comm "kunit_try_catch", pid 1658, jiffies 4294914015 hex dump (first 16 bytes): 10 00 00 00 40 00 00 00 80 00 00 00 00 00 00 00 ....@........... backtrace (crc 857f0cb4): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000007d089d45>] 0xffffffdf052a6864 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 ...... It includes 5*5 times "size 64" memory leaks, which correspond to 5 times test_init_iio_gain_scale() calls with gts_test_gains size 10 (10*size(int)) and gts_test_itimes size 5. It also includes 5*1 times "size 16" memory leak, which correspond to one time __test_init_iio_gain_scale() call with gts_test_gains_gain_low size 3 (3*size(int)) and gts_test_itimes size 5. The reason is that the per_time_gains[i] is not freed which is allocated in the "gts->num_itime" for loop in iio_gts_build_avail_scale_table(). |
| CVE-2024-50230 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug due to missing clearing of checked flag Syzbot reported that in directory operations after nilfs2 detects filesystem corruption and degrades to read-only, __block_write_begin_int(), which is called to prepare block writes, may fail the BUG_ON check for accesses exceeding the folio/page size, triggering a kernel bug. This was found to be because the "checked" flag of a page/folio was not cleared when it was discarded by nilfs2's own routine, which causes the sanity check of directory entries to be skipped when the directory page/folio is reloaded. So, fix that. This was necessary when the use of nilfs2's own page discard routine was applied to more than just metadata files. |
| CVE-2024-50229 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential deadlock with newly created symlinks Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers memory reclamation involving the filesystem layer, which can result in circular lock dependencies among the reader/writer semaphore nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the fs_reclaim pseudo lock. This is because after commit 21fc61c73c39 ("don't put symlink bodies in pagecache into highmem"), the gfp flags of the page cache for symbolic links are overwritten to GFP_KERNEL via inode_nohighmem(). This is not a problem for symlinks read from the backing device, because the __GFP_FS flag is dropped after inode_nohighmem() is called. However, when a new symlink is created with nilfs_symlink(), the gfp flags remain overwritten to GFP_KERNEL. Then, memory allocation called from page_symlink() etc. triggers memory reclamation including the FS layer, which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can cause a deadlock if they are called while nilfs->ns_segctor_sem is held: Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags of newly created symlinks in the same way that nilfs_new_inode() and __nilfs_read_inode() do, as a workaround until we adopt nofs allocation scope consistently or improve the locking constraints. |
| CVE-2024-50228 | In the Linux kernel, the following vulnerability has been resolved: mm: shmem: fix data-race in shmem_getattr() I got the following KCSAN report during syzbot testing: ================================================================== BUG: KCSAN: data-race in generic_fillattr / inode_set_ctime_current write to 0xffff888102eb3260 of 4 bytes by task 6565 on cpu 1: inode_set_ctime_to_ts include/linux/fs.h:1638 [inline] inode_set_ctime_current+0x169/0x1d0 fs/inode.c:2626 shmem_mknod+0x117/0x180 mm/shmem.c:3443 shmem_create+0x34/0x40 mm/shmem.c:3497 lookup_open fs/namei.c:3578 [inline] open_last_lookups fs/namei.c:3647 [inline] path_openat+0xdbc/0x1f00 fs/namei.c:3883 do_filp_open+0xf7/0x200 fs/namei.c:3913 do_sys_openat2+0xab/0x120 fs/open.c:1416 do_sys_open fs/open.c:1431 [inline] __do_sys_openat fs/open.c:1447 [inline] __se_sys_openat fs/open.c:1442 [inline] __x64_sys_openat+0xf3/0x120 fs/open.c:1442 x64_sys_call+0x1025/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:258 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff888102eb3260 of 4 bytes by task 3498 on cpu 0: inode_get_ctime_nsec include/linux/fs.h:1623 [inline] inode_get_ctime include/linux/fs.h:1629 [inline] generic_fillattr+0x1dd/0x2f0 fs/stat.c:62 shmem_getattr+0x17b/0x200 mm/shmem.c:1157 vfs_getattr_nosec fs/stat.c:166 [inline] vfs_getattr+0x19b/0x1e0 fs/stat.c:207 vfs_statx_path fs/stat.c:251 [inline] vfs_statx+0x134/0x2f0 fs/stat.c:315 vfs_fstatat+0xec/0x110 fs/stat.c:341 __do_sys_newfstatat fs/stat.c:505 [inline] __se_sys_newfstatat+0x58/0x260 fs/stat.c:499 __x64_sys_newfstatat+0x55/0x70 fs/stat.c:499 x64_sys_call+0x141f/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:263 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7e value changed: 0x2755ae53 -> 0x27ee44d3 Reported by Kernel Concurrency Sanitizer on: CPU: 0 UID: 0 PID: 3498 Comm: udevd Not tainted 6.11.0-rc6-syzkaller-00326-gd1f2d51b711a-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 ================================================================== When calling generic_fillattr(), if you don't hold read lock, data-race will occur in inode member variables, which can cause unexpected behavior. Since there is no special protection when shmem_getattr() calls generic_fillattr(), data-race occurs by functions such as shmem_unlink() or shmem_mknod(). This can cause unexpected results, so commenting it out is not enough. Therefore, when calling generic_fillattr() from shmem_getattr(), it is appropriate to protect the inode using inode_lock_shared() and inode_unlock_shared() to prevent data-race. |
| CVE-2024-50227 | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan() KASAN reported following issue: BUG: KASAN: stack-out-of-bounds in tb_retimer_scan+0xffe/0x1550 [thunderbolt] Read of size 4 at addr ffff88810111fc1c by task kworker/u56:0/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/u56:0 Tainted: G U 6.11.0+ #1387 Tainted: [U]=USER Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt] Call Trace: <TASK> dump_stack_lvl+0x6c/0x90 print_report+0xd1/0x630 kasan_report+0xdb/0x110 __asan_report_load4_noabort+0x14/0x20 tb_retimer_scan+0xffe/0x1550 [thunderbolt] tb_scan_port+0xa6f/0x2060 [thunderbolt] tb_handle_hotplug+0x17b1/0x3080 [thunderbolt] process_one_work+0x626/0x1100 worker_thread+0x6c8/0xfa0 kthread+0x2c8/0x3a0 ret_from_fork+0x3a/0x80 ret_from_fork_asm+0x1a/0x30 This happens because the loop variable still gets incremented by one so max becomes 3 instead of 2, and this makes the second loop read past the the array declared on the stack. Fix this by assigning to max directly in the loop body. |
| CVE-2024-50226 | In the Linux kernel, the following vulnerability has been resolved: cxl/port: Fix use-after-free, permit out-of-order decoder shutdown In support of investigating an initialization failure report [1], cxl_test was updated to register mock memory-devices after the mock root-port/bus device had been registered. That led to cxl_test crashing with a use-after-free bug with the following signature: cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1 cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1 cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0 1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1 [..] cxld_unregister: cxl decoder14.0: cxl_region_decode_reset: cxl_region region3: mock_decoder_reset: cxl_port port3: decoder3.0 reset 2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1 cxl_endpoint_decoder_release: cxl decoder14.0: [..] cxld_unregister: cxl decoder7.0: 3) cxl_region_decode_reset: cxl_region region3: Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI [..] RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core] [..] Call Trace: <TASK> cxl_region_decode_reset+0x69/0x190 [cxl_core] cxl_region_detach+0xe8/0x210 [cxl_core] cxl_decoder_kill_region+0x27/0x40 [cxl_core] cxld_unregister+0x5d/0x60 [cxl_core] At 1) a region has been established with 2 endpoint decoders (7.0 and 14.0). Those endpoints share a common switch-decoder in the topology (3.0). At teardown, 2), decoder14.0 is the first to be removed and hits the "out of order reset case" in the switch decoder. The effect though is that region3 cleanup is aborted leaving it in-tact and referencing decoder14.0. At 3) the second attempt to teardown region3 trips over the stale decoder14.0 object which has long since been deleted. The fix here is to recognize that the CXL specification places no mandate on in-order shutdown of switch-decoders, the driver enforces in-order allocation, and hardware enforces in-order commit. So, rather than fail and leave objects dangling, always remove them. In support of making cxl_region_decode_reset() always succeed, cxl_region_invalidate_memregion() failures are turned into warnings. Crashing the kernel is ok there since system integrity is at risk if caches cannot be managed around physical address mutation events like CXL region destruction. A new device_for_each_child_reverse_from() is added to cleanup port->commit_end after all dependent decoders have been disabled. In other words if decoders are allocated 0->1->2 and disabled 1->2->0 then port->commit_end only decrements from 2 after 2 has been disabled, and it decrements all the way to zero since 1 was disabled previously. |
| CVE-2024-50225 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix error propagation of split bios The purpose of btrfs_bbio_propagate_error() shall be propagating an error of split bio to its original btrfs_bio, and tell the error to the upper layer. However, it's not working well on some cases. * Case 1. Immediate (or quick) end_bio with an error When btrfs sends btrfs_bio to mirrored devices, btrfs calls btrfs_bio_end_io() when all the mirroring bios are completed. If that btrfs_bio was split, it is from btrfs_clone_bioset and its end_io function is btrfs_orig_write_end_io. For this case, btrfs_bbio_propagate_error() accesses the orig_bbio's bio context to increase the error count. That works well in most cases. However, if the end_io is called enough fast, orig_bbio's (remaining part after split) bio context may not be properly set at that time. Since the bio context is set when the orig_bbio (the last btrfs_bio) is sent to devices, that might be too late for earlier split btrfs_bio's completion. That will result in NULL pointer dereference. That bug is easily reproducible by running btrfs/146 on zoned devices [1] and it shows the following trace. [1] You need raid-stripe-tree feature as it create "-d raid0 -m raid1" FS. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 UID: 0 PID: 13 Comm: kworker/u32:1 Not tainted 6.11.0-rc7-BTRFS-ZNS+ #474 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: writeback wb_workfn (flush-btrfs-5) RIP: 0010:btrfs_bio_end_io+0xae/0xc0 [btrfs] BTRFS error (device dm-0): bdev /dev/mapper/error-test errs: wr 2, rd 0, flush 0, corrupt 0, gen 0 RSP: 0018:ffffc9000006f248 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888005a7f080 RCX: ffffc9000006f1dc RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff888005a7f080 RBP: ffff888011dfc540 R08: 0000000000000000 R09: 0000000000000001 R10: ffffffff82e508e0 R11: 0000000000000005 R12: ffff88800ddfbe58 R13: ffff888005a7f080 R14: ffff888005a7f158 R15: ffff888005a7f158 FS: 0000000000000000(0000) GS:ffff88803ea80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000002e22006 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body.cold+0x19/0x26 ? page_fault_oops+0x13e/0x2b0 ? _printk+0x58/0x73 ? do_user_addr_fault+0x5f/0x750 ? exc_page_fault+0x76/0x240 ? asm_exc_page_fault+0x22/0x30 ? btrfs_bio_end_io+0xae/0xc0 [btrfs] ? btrfs_log_dev_io_error+0x7f/0x90 [btrfs] btrfs_orig_write_end_io+0x51/0x90 [btrfs] dm_submit_bio+0x5c2/0xa50 [dm_mod] ? find_held_lock+0x2b/0x80 ? blk_try_enter_queue+0x90/0x1e0 __submit_bio+0xe0/0x130 ? ktime_get+0x10a/0x160 ? lockdep_hardirqs_on+0x74/0x100 submit_bio_noacct_nocheck+0x199/0x410 btrfs_submit_bio+0x7d/0x150 [btrfs] btrfs_submit_chunk+0x1a1/0x6d0 [btrfs] ? lockdep_hardirqs_on+0x74/0x100 ? __folio_start_writeback+0x10/0x2c0 btrfs_submit_bbio+0x1c/0x40 [btrfs] submit_one_bio+0x44/0x60 [btrfs] submit_extent_folio+0x13f/0x330 [btrfs] ? btrfs_set_range_writeback+0xa3/0xd0 [btrfs] extent_writepage_io+0x18b/0x360 [btrfs] extent_write_locked_range+0x17c/0x340 [btrfs] ? __pfx_end_bbio_data_write+0x10/0x10 [btrfs] run_delalloc_cow+0x71/0xd0 [btrfs] btrfs_run_delalloc_range+0x176/0x500 [btrfs] ? find_lock_delalloc_range+0x119/0x260 [btrfs] writepage_delalloc+0x2ab/0x480 [btrfs] extent_write_cache_pages+0x236/0x7d0 [btrfs] btrfs_writepages+0x72/0x130 [btrfs] do_writepages+0xd4/0x240 ? find_held_lock+0x2b/0x80 ? wbc_attach_and_unlock_inode+0x12c/0x290 ? wbc_attach_and_unlock_inode+0x12c/0x29 ---truncated--- |
| CVE-2024-50224 | In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-dspi: Fix crash when not using GPIO chip select Add check for the return value of spi_get_csgpiod() to avoid passing a NULL pointer to gpiod_direction_output(), preventing a crash when GPIO chip select is not used. Fix below crash: [ 4.251960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 4.260762] Mem abort info: [ 4.263556] ESR = 0x0000000096000004 [ 4.267308] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.272624] SET = 0, FnV = 0 [ 4.275681] EA = 0, S1PTW = 0 [ 4.278822] FSC = 0x04: level 0 translation fault [ 4.283704] Data abort info: [ 4.286583] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 4.292074] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.297130] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.302445] [0000000000000000] user address but active_mm is swapper [ 4.308805] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 4.315072] Modules linked in: [ 4.318124] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc4-next-20241023-00008-ga20ec42c5fc1 #359 [ 4.328130] Hardware name: LS1046A QDS Board (DT) [ 4.332832] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.339794] pc : gpiod_direction_output+0x34/0x5c [ 4.344505] lr : gpiod_direction_output+0x18/0x5c [ 4.349208] sp : ffff80008003b8f0 [ 4.352517] x29: ffff80008003b8f0 x28: 0000000000000000 x27: ffffc96bcc7e9068 [ 4.359659] x26: ffffc96bcc6e00b0 x25: ffffc96bcc598398 x24: ffff447400132810 [ 4.366800] x23: 0000000000000000 x22: 0000000011e1a300 x21: 0000000000020002 [ 4.373940] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff [ 4.381081] x17: ffff44740016e600 x16: 0000000500000003 x15: 0000000000000007 [ 4.388221] x14: 0000000000989680 x13: 0000000000020000 x12: 000000000000001e [ 4.395362] x11: 0044b82fa09b5a53 x10: 0000000000000019 x9 : 0000000000000008 [ 4.402502] x8 : 0000000000000002 x7 : 0000000000000007 x6 : 0000000000000000 [ 4.409641] x5 : 0000000000000200 x4 : 0000000002000000 x3 : 0000000000000000 [ 4.416781] x2 : 0000000000022202 x1 : 0000000000000000 x0 : 0000000000000000 [ 4.423921] Call trace: [ 4.426362] gpiod_direction_output+0x34/0x5c (P) [ 4.431067] gpiod_direction_output+0x18/0x5c (L) [ 4.435771] dspi_setup+0x220/0x334 |
| CVE-2024-50223 | In the Linux kernel, the following vulnerability has been resolved: sched/numa: Fix the potential null pointer dereference in task_numa_work() When running stress-ng-vm-segv test, we found a null pointer dereference error in task_numa_work(). Here is the backtrace: [323676.066985] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ...... [323676.067108] CPU: 35 PID: 2694524 Comm: stress-ng-vm-se ...... [323676.067113] pstate: 23401009 (nzCv daif +PAN -UAO +TCO +DIT +SSBS BTYPE=--) [323676.067115] pc : vma_migratable+0x1c/0xd0 [323676.067122] lr : task_numa_work+0x1ec/0x4e0 [323676.067127] sp : ffff8000ada73d20 [323676.067128] x29: ffff8000ada73d20 x28: 0000000000000000 x27: 000000003e89f010 [323676.067130] x26: 0000000000080000 x25: ffff800081b5c0d8 x24: ffff800081b27000 [323676.067133] x23: 0000000000010000 x22: 0000000104d18cc0 x21: ffff0009f7158000 [323676.067135] x20: 0000000000000000 x19: 0000000000000000 x18: ffff8000ada73db8 [323676.067138] x17: 0001400000000000 x16: ffff800080df40b0 x15: 0000000000000035 [323676.067140] x14: ffff8000ada73cc8 x13: 1fffe0017cc72001 x12: ffff8000ada73cc8 [323676.067142] x11: ffff80008001160c x10: ffff000be639000c x9 : ffff8000800f4ba4 [323676.067145] x8 : ffff000810375000 x7 : ffff8000ada73974 x6 : 0000000000000001 [323676.067147] x5 : 0068000b33e26707 x4 : 0000000000000001 x3 : ffff0009f7158000 [323676.067149] x2 : 0000000000000041 x1 : 0000000000004400 x0 : 0000000000000000 [323676.067152] Call trace: [323676.067153] vma_migratable+0x1c/0xd0 [323676.067155] task_numa_work+0x1ec/0x4e0 [323676.067157] task_work_run+0x78/0xd8 [323676.067161] do_notify_resume+0x1ec/0x290 [323676.067163] el0_svc+0x150/0x160 [323676.067167] el0t_64_sync_handler+0xf8/0x128 [323676.067170] el0t_64_sync+0x17c/0x180 [323676.067173] Code: d2888001 910003fd f9000bf3 aa0003f3 (f9401000) [323676.067177] SMP: stopping secondary CPUs [323676.070184] Starting crashdump kernel... stress-ng-vm-segv in stress-ng is used to stress test the SIGSEGV error handling function of the system, which tries to cause a SIGSEGV error on return from unmapping the whole address space of the child process. Normally this program will not cause kernel crashes. But before the munmap system call returns to user mode, a potential task_numa_work() for numa balancing could be added and executed. In this scenario, since the child process has no vma after munmap, the vma_next() in task_numa_work() will return a null pointer even if the vma iterator restarts from 0. Recheck the vma pointer before dereferencing it in task_numa_work(). |
| CVE-2024-50222 | In the Linux kernel, the following vulnerability has been resolved: iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP generic/077 on x86_32 CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y with highmem, on huge=always tmpfs, issues a warning and then hangs (interruptibly): WARNING: CPU: 5 PID: 3517 at mm/highmem.c:622 kunmap_local_indexed+0x62/0xc9 CPU: 5 UID: 0 PID: 3517 Comm: cp Not tainted 6.12.0-rc4 #2 ... copy_page_from_iter_atomic+0xa6/0x5ec generic_perform_write+0xf6/0x1b4 shmem_file_write_iter+0x54/0x67 Fix copy_page_from_iter_atomic() by limiting it in that case (include/linux/skbuff.h skb_frag_must_loop() does similar). But going forward, perhaps CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is too surprising, has outlived its usefulness, and should just be removed? |
| CVE-2024-50221 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Vangogh: Fix kernel memory out of bounds write KASAN reports that the GPU metrics table allocated in vangogh_tables_init() is not large enough for the memset done in smu_cmn_init_soft_gpu_metrics(). Condensed report follows: [ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu] [ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067 ... [ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 #356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544 [ 33.861816] Tainted: [W]=WARN [ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023 [ 33.861822] Call Trace: [ 33.861826] <TASK> [ 33.861829] dump_stack_lvl+0x66/0x90 [ 33.861838] print_report+0xce/0x620 [ 33.861853] kasan_report+0xda/0x110 [ 33.862794] kasan_check_range+0xfd/0x1a0 [ 33.862799] __asan_memset+0x23/0x40 [ 33.862803] smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.863306] vangogh_get_gpu_metrics_v2_4+0x123/0xad0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.864257] vangogh_common_get_gpu_metrics+0xb0c/0xbc0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.865682] amdgpu_dpm_get_gpu_metrics+0xcc/0x110 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.866160] amdgpu_get_gpu_metrics+0x154/0x2d0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.867135] dev_attr_show+0x43/0xc0 [ 33.867147] sysfs_kf_seq_show+0x1f1/0x3b0 [ 33.867155] seq_read_iter+0x3f8/0x1140 [ 33.867173] vfs_read+0x76c/0xc50 [ 33.867198] ksys_read+0xfb/0x1d0 [ 33.867214] do_syscall_64+0x90/0x160 ... [ 33.867353] Allocated by task 378 on cpu 7 at 22.794876s: [ 33.867358] kasan_save_stack+0x33/0x50 [ 33.867364] kasan_save_track+0x17/0x60 [ 33.867367] __kasan_kmalloc+0x87/0x90 [ 33.867371] vangogh_init_smc_tables+0x3f9/0x840 [amdgpu] [ 33.867835] smu_sw_init+0xa32/0x1850 [amdgpu] [ 33.868299] amdgpu_device_init+0x467b/0x8d90 [amdgpu] [ 33.868733] amdgpu_driver_load_kms+0x19/0xf0 [amdgpu] [ 33.869167] amdgpu_pci_probe+0x2d6/0xcd0 [amdgpu] [ 33.869608] local_pci_probe+0xda/0x180 [ 33.869614] pci_device_probe+0x43f/0x6b0 Empirically we can confirm that the former allocates 152 bytes for the table, while the latter memsets the 168 large block. Root cause appears that when GPU metrics tables for v2_4 parts were added it was not considered to enlarge the table to fit. The fix in this patch is rather "brute force" and perhaps later should be done in a smarter way, by extracting and consolidating the part version to size logic to a common helper, instead of brute forcing the largest possible allocation. Nevertheless, for now this works and fixes the out of bounds write. v2: * Drop impossible v3_0 case. (Mario) (cherry picked from commit 0880f58f9609f0200483a49429af0f050d281703) |
| CVE-2024-50220 | In the Linux kernel, the following vulnerability has been resolved: fork: do not invoke uffd on fork if error occurs Patch series "fork: do not expose incomplete mm on fork". During fork we may place the virtual memory address space into an inconsistent state before the fork operation is complete. In addition, we may encounter an error during the fork operation that indicates that the virtual memory address space is invalidated. As a result, we should not be exposing it in any way to external machinery that might interact with the mm or VMAs, machinery that is not designed to deal with incomplete state. We specifically update the fork logic to defer khugepaged and ksm to the end of the operation and only to be invoked if no error arose, and disallow uffd from observing fork events should an error have occurred. This patch (of 2): Currently on fork we expose the virtual address space of a process to userland unconditionally if uffd is registered in VMAs, regardless of whether an error arose in the fork. This is performed in dup_userfaultfd_complete() which is invoked unconditionally, and performs two duties - invoking registered handlers for the UFFD_EVENT_FORK event via dup_fctx(), and clearing down userfaultfd_fork_ctx objects established in dup_userfaultfd(). This is problematic, because the virtual address space may not yet be correctly initialised if an error arose. The change in commit d24062914837 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()") makes this more pertinent as we may be in a state where entries in the maple tree are not yet consistent. We address this by, on fork error, ensuring that we roll back state that we would otherwise expect to clean up through the event being handled by userland and perform the memory freeing duty otherwise performed by dup_userfaultfd_complete(). We do this by implementing a new function, dup_userfaultfd_fail(), which performs the same loop, only decrementing reference counts. Note that we perform mmgrab() on the parent and child mm's, however userfaultfd_ctx_put() will mmdrop() this once the reference count drops to zero, so we will avoid memory leaks correctly here. |
| CVE-2024-50219 | In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: let GFP_ATOMIC order-0 allocs access highatomic reserves Under memory pressure it's possible for GFP_ATOMIC order-0 allocations to fail even though free pages are available in the highatomic reserves. GFP_ATOMIC allocations cannot trigger unreserve_highatomic_pageblock() since it's only run from reclaim. Given that such allocations will pass the watermarks in __zone_watermark_unusable_free(), it makes sense to fallback to highatomic reserves the same way that ALLOC_OOM can. This fixes order-0 page allocation failures observed on Cloudflare's fleet when handling network packets: kswapd1: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0-7 CPU: 10 PID: 696 Comm: kswapd1 Kdump: loaded Tainted: G O 6.6.43-CUSTOM #1 Hardware name: MACHINE Call Trace: <IRQ> dump_stack_lvl+0x3c/0x50 warn_alloc+0x13a/0x1c0 __alloc_pages_slowpath.constprop.0+0xc9d/0xd10 __alloc_pages+0x327/0x340 __napi_alloc_skb+0x16d/0x1f0 bnxt_rx_page_skb+0x96/0x1b0 [bnxt_en] bnxt_rx_pkt+0x201/0x15e0 [bnxt_en] __bnxt_poll_work+0x156/0x2b0 [bnxt_en] bnxt_poll+0xd9/0x1c0 [bnxt_en] __napi_poll+0x2b/0x1b0 bpf_trampoline_6442524138+0x7d/0x1000 __napi_poll+0x5/0x1b0 net_rx_action+0x342/0x740 handle_softirqs+0xcf/0x2b0 irq_exit_rcu+0x6c/0x90 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> [[email protected]: update comment] Link: https://lkml.kernel.org/r/[email protected] |
| CVE-2024-50218 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: pass u64 to ocfs2_truncate_inline maybe overflow Syzbot reported a kernel BUG in ocfs2_truncate_inline. There are two reasons for this: first, the parameter value passed is greater than ocfs2_max_inline_data_with_xattr, second, the start and end parameters of ocfs2_truncate_inline are "unsigned int". So, we need to add a sanity check for byte_start and byte_len right before ocfs2_truncate_inline() in ocfs2_remove_inode_range(), if they are greater than ocfs2_max_inline_data_with_xattr return -EINVAL. |
| CVE-2024-50217 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids() Mounting btrfs from two images (which have the same one fsid and two different dev_uuids) in certain executing order may trigger an UAF for variable 'device->bdev_file' in __btrfs_free_extra_devids(). And following are the details: 1. Attach image_1 to loop0, attach image_2 to loop1, and scan btrfs devices by ioctl(BTRFS_IOC_SCAN_DEV): / btrfs_device_1 → loop0 fs_device \ btrfs_device_2 → loop1 2. mount /dev/loop0 /mnt btrfs_open_devices btrfs_device_1->bdev_file = btrfs_get_bdev_and_sb(loop0) btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1) btrfs_fill_super open_ctree fail: btrfs_close_devices // -ENOMEM btrfs_close_bdev(btrfs_device_1) fput(btrfs_device_1->bdev_file) // btrfs_device_1->bdev_file is freed btrfs_close_bdev(btrfs_device_2) fput(btrfs_device_2->bdev_file) 3. mount /dev/loop1 /mnt btrfs_open_devices btrfs_get_bdev_and_sb(&bdev_file) // EIO, btrfs_device_1->bdev_file is not assigned, // which points to a freed memory area btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1) btrfs_fill_super open_ctree btrfs_free_extra_devids if (btrfs_device_1->bdev_file) fput(btrfs_device_1->bdev_file) // UAF ! Fix it by setting 'device->bdev_file' as 'NULL' after closing the btrfs_device in btrfs_close_one_device(). |
| CVE-2024-50216 | In the Linux kernel, the following vulnerability has been resolved: xfs: fix finding a last resort AG in xfs_filestream_pick_ag When the main loop in xfs_filestream_pick_ag fails to find a suitable AG it tries to just pick the online AG. But the loop for that uses args->pag as loop iterator while the later code expects pag to be set. Fix this by reusing the max_pag case for this last resort, and also add a check for impossible case of no AG just to make sure that the uninitialized pag doesn't even escape in theory. |
| CVE-2024-50215 | In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: assign dh_key to NULL after kfree_sensitive ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup() for the same controller. So it's better to nullify it after release on error path in order to avoid double free later in nvmet_destroy_auth(). Found by Linux Verification Center (linuxtesting.org) with Svace. |
| CVE-2024-50214 | In the Linux kernel, the following vulnerability has been resolved: drm/connector: hdmi: Fix memory leak in drm_display_mode_from_cea_vic() modprobe drm_connector_test and then rmmod drm_connector_test, the following memory leak occurs. The `mode` allocated in drm_mode_duplicate() called by drm_display_mode_from_cea_vic() is not freed, which cause the memory leak: unreferenced object 0xffffff80cb0ee400 (size 128): comm "kunit_try_catch", pid 1948, jiffies 4294950339 hex dump (first 32 bytes): 14 44 02 00 80 07 d8 07 04 08 98 08 00 00 38 04 .D............8. 3c 04 41 04 65 04 00 00 05 00 00 00 00 00 00 00 <.A.e........... backtrace (crc 90e9585c): [<00000000ec42e3d7>] kmemleak_alloc+0x34/0x40 [<00000000d0ef055a>] __kmalloc_cache_noprof+0x26c/0x2f4 [<00000000c2062161>] drm_mode_duplicate+0x44/0x19c [<00000000f96c74aa>] drm_display_mode_from_cea_vic+0x88/0x98 [<00000000d8f2c8b4>] 0xffffffdc982a4868 [<000000005d164dbc>] kunit_try_run_case+0x13c/0x3ac [<000000006fb23398>] kunit_generic_run_threadfn_adapter+0x80/0xec [<000000006ea56ca0>] kthread+0x2e8/0x374 [<000000000676063f>] ret_from_fork+0x10/0x20 ...... Free `mode` by using drm_kunit_display_mode_from_cea_vic() to fix it. |
| CVE-2024-50213 | In the Linux kernel, the following vulnerability has been resolved: drm/tests: hdmi: Fix memory leaks in drm_display_mode_from_cea_vic() modprobe drm_hdmi_state_helper_test and then rmmod it, the following memory leak occurs. The `mode` allocated in drm_mode_duplicate() called by drm_display_mode_from_cea_vic() is not freed, which cause the memory leak: unreferenced object 0xffffff80ccd18100 (size 128): comm "kunit_try_catch", pid 1851, jiffies 4295059695 hex dump (first 32 bytes): 57 62 00 00 80 02 90 02 f0 02 20 03 00 00 e0 01 Wb........ ..... ea 01 ec 01 0d 02 00 00 0a 00 00 00 00 00 00 00 ................ backtrace (crc c2f1aa95): [<000000000f10b11b>] kmemleak_alloc+0x34/0x40 [<000000001cd4cf73>] __kmalloc_cache_noprof+0x26c/0x2f4 [<00000000f1f3cffa>] drm_mode_duplicate+0x44/0x19c [<000000008cbeef13>] drm_display_mode_from_cea_vic+0x88/0x98 [<0000000019daaacf>] 0xffffffedc11ae69c [<000000000aad0f85>] kunit_try_run_case+0x13c/0x3ac [<00000000a9210bac>] kunit_generic_run_threadfn_adapter+0x80/0xec [<000000000a0b2e9e>] kthread+0x2e8/0x374 [<00000000bd668858>] ret_from_fork+0x10/0x20 ...... Free `mode` by using drm_kunit_display_mode_from_cea_vic() to fix it. |
| CVE-2024-50212 | In the Linux kernel, the following vulnerability has been resolved: lib: alloc_tag_module_unload must wait for pending kfree_rcu calls Ben Greear reports following splat: ------------[ cut here ]------------ net/netfilter/nf_nat_core.c:1114 module nf_nat func:nf_nat_register_fn has 256 allocated at module unload WARNING: CPU: 1 PID: 10421 at lib/alloc_tag.c:168 alloc_tag_module_unload+0x22b/0x3f0 Modules linked in: nf_nat(-) btrfs ufs qnx4 hfsplus hfs minix vfat msdos fat ... Hardware name: Default string Default string/SKYBAY, BIOS 5.12 08/04/2020 RIP: 0010:alloc_tag_module_unload+0x22b/0x3f0 codetag_unload_module+0x19b/0x2a0 ? codetag_load_module+0x80/0x80 nf_nat module exit calls kfree_rcu on those addresses, but the free operation is likely still pending by the time alloc_tag checks for leaks. Wait for outstanding kfree_rcu operations to complete before checking resolves this warning. Reproducer: unshare -n iptables-nft -t nat -A PREROUTING -p tcp grep nf_nat /proc/allocinfo # will list 4 allocations rmmod nft_chain_nat rmmod nf_nat # will WARN. [[email protected]: add comment] |
| CVE-2024-50211 | In the Linux kernel, the following vulnerability has been resolved: udf: refactor inode_bmap() to handle error Refactor inode_bmap() to handle error since udf_next_aext() can return error now. On situations like ftruncate, udf_extend_file() can now detect errors and bail out early without resorting to checking for particular offsets and assuming internal behavior of these functions. |
| CVE-2024-50210 | In the Linux kernel, the following vulnerability has been resolved: posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime() If get_clock_desc() succeeds, it calls fget() for the clockid's fd, and get the clk->rwsem read lock, so the error path should release the lock to make the lock balance and fput the clockid's fd to make the refcount balance and release the fd related resource. However the below commit left the error path locked behind resulting in unbalanced locking. Check timespec64_valid_strict() before get_clock_desc() to fix it, because the "ts" is not changed after that. [[email protected]: fixed commit message typo] |
| CVE-2024-50209 | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add a check for memory allocation __alloc_pbl() can return error when memory allocation fails. Driver is not checking the status on one of the instances. |
| CVE-2024-50208 | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pages Avoid memory corruption while setting up Level-2 PBL pages for the non MR resources when num_pages > 256K. There will be a single PDE page address (contiguous pages in the case of > PAGE_SIZE), but, current logic assumes multiple pages, leading to invalid memory access after 256K PBL entries in the PDE. |
| CVE-2024-50207 | In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix reader locking when changing the sub buffer order The function ring_buffer_subbuf_order_set() updates each ring_buffer_per_cpu and installs new sub buffers that match the requested page order. This operation may be invoked concurrently with readers that rely on some of the modified data, such as the head bit (RB_PAGE_HEAD), or the ring_buffer_per_cpu.pages and reader_page pointers. However, no exclusive access is acquired by ring_buffer_subbuf_order_set(). Modifying the mentioned data while a reader also operates on them can then result in incorrect memory access and various crashes. Fix the problem by taking the reader_lock when updating a specific ring_buffer_per_cpu in ring_buffer_subbuf_order_set(). |
| CVE-2024-50206 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init The loop responsible for allocating up to MTK_FQ_DMA_LENGTH buffers must only touch as many descriptors, otherwise it ends up corrupting unrelated memory. Fix the loop iteration count accordingly. |
| CVE-2024-50205 | In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size() The step variable is initialized to zero. It is changed in the loop, but if it's not changed it will remain zero. Add a variable check before the division. The observed behavior was introduced by commit 826b5de90c0b ("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size"), and it is difficult to show that any of the interval parameters will satisfy the snd_interval_test() condition with data from the amdtp_rate_table[] table. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-50204 | In the Linux kernel, the following vulnerability has been resolved: fs: don't try and remove empty rbtree node When copying a namespace we won't have added the new copy into the namespace rbtree until after the copy succeeded. Calling free_mnt_ns() will try to remove the copy from the rbtree which is invalid. Simply free the namespace skeleton directly. |
| CVE-2024-50203 | In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix address emission with tag-based KASAN enabled When BPF_TRAMP_F_CALL_ORIG is enabled, the address of a bpf_tramp_image struct on the stack is passed during the size calculation pass and an address on the heap is passed during code generation. This may cause a heap buffer overflow if the heap address is tagged because emit_a64_mov_i64() will emit longer code than it did during the size calculation pass. The same problem could occur without tag-based KASAN if one of the 16-bit words of the stack address happened to be all-ones during the size calculation pass. Fix the problem by assuming the worst case (4 instructions) when calculating the size of the bpf_tramp_image address emission. |
| CVE-2024-50202 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: propagate directory read errors from nilfs_find_entry() Syzbot reported that a task hang occurs in vcs_open() during a fuzzing test for nilfs2. The root cause of this problem is that in nilfs_find_entry(), which searches for directory entries, ignores errors when loading a directory page/folio via nilfs_get_folio() fails. If the filesystem images is corrupted, and the i_size of the directory inode is large, and the directory page/folio is successfully read but fails the sanity check, for example when it is zero-filled, nilfs_check_folio() may continue to spit out error messages in bursts. Fix this issue by propagating the error to the callers when loading a page/folio fails in nilfs_find_entry(). The current interface of nilfs_find_entry() and its callers is outdated and cannot propagate error codes such as -EIO and -ENOMEM returned via nilfs_find_entry(), so fix it together. |
| CVE-2024-50201 | In the Linux kernel, the following vulnerability has been resolved: drm/radeon: Fix encoder->possible_clones Include the encoder itself in its possible_clones bitmask. In the past nothing validated that drivers were populating possible_clones correctly, but that changed in commit 74d2aacbe840 ("drm: Validate encoder->possible_clones"). Looks like radeon never got the memo and is still not following the rules 100% correctly. This results in some warnings during driver initialization: Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7) WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c ... (cherry picked from commit 3b6e7d40649c0d75572039aff9d0911864c689db) |
| CVE-2024-50200 | In the Linux kernel, the following vulnerability has been resolved: maple_tree: correct tree corruption on spanning store Patch series "maple_tree: correct tree corruption on spanning store", v3. There has been a nasty yet subtle maple tree corruption bug that appears to have been in existence since the inception of the algorithm. This bug seems far more likely to happen since commit f8d112a4e657 ("mm/mmap: avoid zeroing vma tree in mmap_region()"), which is the point at which reports started to be submitted concerning this bug. We were made definitely aware of the bug thanks to the kind efforts of Bert Karwatzki who helped enormously in my being able to track this down and identify the cause of it. The bug arises when an attempt is made to perform a spanning store across two leaf nodes, where the right leaf node is the rightmost child of the shared parent, AND the store completely consumes the right-mode node. This results in mas_wr_spanning_store() mitakenly duplicating the new and existing entries at the maximum pivot within the range, and thus maple tree corruption. The fix patch corrects this by detecting this scenario and disallowing the mistaken duplicate copy. The fix patch commit message goes into great detail as to how this occurs. This series also includes a test which reliably reproduces the issue, and asserts that the fix works correctly. Bert has kindly tested the fix and confirmed it resolved his issues. Also Mikhail Gavrilov kindly reported what appears to be precisely the same bug, which this fix should also resolve. This patch (of 2): There has been a subtle bug present in the maple tree implementation from its inception. This arises from how stores are performed - when a store occurs, it will overwrite overlapping ranges and adjust the tree as necessary to accommodate this. A range may always ultimately span two leaf nodes. In this instance we walk the two leaf nodes, determine which elements are not overwritten to the left and to the right of the start and end of the ranges respectively and then rebalance the tree to contain these entries and the newly inserted one. This kind of store is dubbed a 'spanning store' and is implemented by mas_wr_spanning_store(). In order to reach this stage, mas_store_gfp() invokes mas_wr_preallocate(), mas_wr_store_type() and mas_wr_walk() in turn to walk the tree and update the object (mas) to traverse to the location where the write should be performed, determining its store type. When a spanning store is required, this function returns false stopping at the parent node which contains the target range, and mas_wr_store_type() marks the mas->store_type as wr_spanning_store to denote this fact. When we go to perform the store in mas_wr_spanning_store(), we first determine the elements AFTER the END of the range we wish to store (that is, to the right of the entry to be inserted) - we do this by walking to the NEXT pivot in the tree (i.e. r_mas.last + 1), starting at the node we have just determined contains the range over which we intend to write. We then turn our attention to the entries to the left of the entry we are inserting, whose state is represented by l_mas, and copy these into a 'big node', which is a special node which contains enough slots to contain two leaf node's worth of data. We then copy the entry we wish to store immediately after this - the copy and the insertion of the new entry is performed by mas_store_b_node(). After this we copy the elements to the right of the end of the range which we are inserting, if we have not exceeded the length of the node (i.e. r_mas.offset <= r_mas.end). Herein lies the bug - under very specific circumstances, this logic can break and corrupt the maple tree. Consider the following tree: Height 0 Root Node / \ pivot = 0xffff / \ pivot = ULONG_MAX / ---truncated--- |
| CVE-2024-50199 | In the Linux kernel, the following vulnerability has been resolved: mm/swapfile: skip HugeTLB pages for unuse_vma I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The problem can be reproduced by the following steps: 1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory. 2. Swapout the above anonymous memory. 3. run swapoff and we will get a bad pud error in kernel message: mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7) We can tell that pud_clear_bad is called by pud_none_or_clear_bad in unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never be freed because we lost it from page table. We can skip HugeTLB pages for unuse_vma to fix it. |
| CVE-2024-50198 | In the Linux kernel, the following vulnerability has been resolved: iio: light: veml6030: fix IIO device retrieval from embedded device The dev pointer that is received as an argument in the in_illuminance_period_available_show function references the device embedded in the IIO device, not in the i2c client. dev_to_iio_dev() must be used to accessthe right data. The current implementation leads to a segmentation fault on every attempt to read the attribute because indio_dev gets a NULL assignment. This bug has been present since the first appearance of the driver, apparently since the last version (V6) before getting applied. A constant attribute was used until then, and the last modifications might have not been tested again. |
| CVE-2024-50197 | In the Linux kernel, the following vulnerability has been resolved: pinctrl: intel: platform: fix error path in device_for_each_child_node() The device_for_each_child_node() loop requires calls to fwnode_handle_put() upon early returns to decrement the refcount of the child node and avoid leaking memory if that error path is triggered. There is one early returns within that loop in intel_platform_pinctrl_prepare_community(), but fwnode_handle_put() is missing. Instead of adding the missing call, the scoped version of the loop can be used to simplify the code and avoid mistakes in the future if new early returns are added, as the child node is only used for parsing, and it is never assigned. |
| CVE-2024-50196 | In the Linux kernel, the following vulnerability has been resolved: pinctrl: ocelot: fix system hang on level based interrupts The current implementation only calls chained_irq_enter() and chained_irq_exit() if it detects pending interrupts. ``` for (i = 0; i < info->stride; i++) { uregmap_read(info->map, id_reg + 4 * i, ®); if (!reg) continue; chained_irq_enter(parent_chip, desc); ``` However, in case of GPIO pin configured in level mode and the parent controller configured in edge mode, GPIO interrupt might be lowered by the hardware. In the result, if the interrupt is short enough, the parent interrupt is still pending while the GPIO interrupt is cleared; chained_irq_enter() never gets called and the system hangs trying to service the parent interrupt. Moving chained_irq_enter() and chained_irq_exit() outside the for loop ensures that they are called even when GPIO interrupt is lowered by the hardware. The similar code with chained_irq_enter() / chained_irq_exit() functions wrapping interrupt checking loop may be found in many other drivers: ``` grep -r -A 10 chained_irq_enter drivers/pinctrl ``` |
| CVE-2024-50195 | In the Linux kernel, the following vulnerability has been resolved: posix-clock: Fix missing timespec64 check in pc_clock_settime() As Andrew pointed out, it will make sense that the PTP core checked timespec64 struct's tv_sec and tv_nsec range before calling ptp->info->settime64(). As the man manual of clock_settime() said, if tp.tv_sec is negative or tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL, which include dynamic clocks which handles PTP clock, and the condition is consistent with timespec64_valid(). As Thomas suggested, timespec64_valid() only check the timespec is valid, but not ensure that the time is in a valid range, so check it ahead using timespec64_valid_strict() in pc_clock_settime() and return -EINVAL if not valid. There are some drivers that use tp->tv_sec and tp->tv_nsec directly to write registers without validity checks and assume that the higher layer has checked it, which is dangerous and will benefit from this, such as hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(), and some drivers can remove the checks of itself. |
| CVE-2024-50194 | In the Linux kernel, the following vulnerability has been resolved: arm64: probes: Fix uprobes for big-endian kernels The arm64 uprobes code is broken for big-endian kernels as it doesn't convert the in-memory instruction encoding (which is always little-endian) into the kernel's native endianness before analyzing and simulating instructions. This may result in a few distinct problems: * The kernel may may erroneously reject probing an instruction which can safely be probed. * The kernel may erroneously erroneously permit stepping an instruction out-of-line when that instruction cannot be stepped out-of-line safely. * The kernel may erroneously simulate instruction incorrectly dur to interpretting the byte-swapped encoding. The endianness mismatch isn't caught by the compiler or sparse because: * The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so the compiler and sparse have no idea these contain a little-endian 32-bit value. The core uprobes code populates these with a memcpy() which similarly does not handle endianness. * While the uprobe_opcode_t type is an alias for __le32, both arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[] to the similarly-named probe_opcode_t, which is an alias for u32. Hence there is no endianness conversion warning. Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and adding the appropriate __le32_to_cpu() conversions prior to consuming the instruction encoding. The core uprobes copies these fields as opaque ranges of bytes, and so is unaffected by this change. At the same time, remove MAX_UINSN_BYTES and consistently use AARCH64_INSN_SIZE for clarity. Tested with the following: | #include <stdio.h> | #include <stdbool.h> | | #define noinline __attribute__((noinline)) | | static noinline void *adrp_self(void) | { | void *addr; | | asm volatile( | " adrp %x0, adrp_self\n" | " add %x0, %x0, :lo12:adrp_self\n" | : "=r" (addr)); | } | | | int main(int argc, char *argv) | { | void *ptr = adrp_self(); | bool equal = (ptr == adrp_self); | | printf("adrp_self => %p\n" | "adrp_self() => %p\n" | "%s\n", | adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL"); | | return 0; | } .... where the adrp_self() function was compiled to: | 00000000004007e0 <adrp_self>: | 4007e0: 90000000 adrp x0, 400000 <__ehdr_start> | 4007e4: 911f8000 add x0, x0, #0x7e0 | 4007e8: d65f03c0 ret Before this patch, the ADRP is not recognized, and is assumed to be steppable, resulting in corruption of the result: | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0x4007e0 | EQUAL | # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events | # echo 1 > /sys/kernel/tracing/events/uprobes/enable | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0xffffffffff7e0 | NOT EQUAL After this patch, the ADRP is correctly recognized and simulated: | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0x4007e0 | EQUAL | # | # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events | # echo 1 > /sys/kernel/tracing/events/uprobes/enable | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0x4007e0 | EQUAL |
| CVE-2024-50193 | In the Linux kernel, the following vulnerability has been resolved: x86/entry_32: Clear CPU buffers after register restore in NMI return CPU buffers are currently cleared after call to exc_nmi, but before register state is restored. This may be okay for MDS mitigation but not for RDFS. Because RDFS mitigation requires CPU buffers to be cleared when registers don't have any sensitive data. Move CLEAR_CPU_BUFFERS after RESTORE_ALL_NMI. |
| CVE-2024-50192 | In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't allow a VMOVP on a dying VPE Kunkun Jiang reported that there is a small window of opportunity for userspace to force a change of affinity for a VPE while the VPE has already been unmapped, but the corresponding doorbell interrupt still visible in /proc/irq/. Plug the race by checking the value of vmapp_count, which tracks whether the VPE is mapped ot not, and returning an error in this case. This involves making vmapp_count common to both GICv4.1 and its v4.0 ancestor. |
| CVE-2024-50191 | In the Linux kernel, the following vulnerability has been resolved: ext4: don't set SB_RDONLY after filesystem errors When the filesystem is mounted with errors=remount-ro, we were setting SB_RDONLY flag to stop all filesystem modifications. We knew this misses proper locking (sb->s_umount) and does not go through proper filesystem remount procedure but it has been the way this worked since early ext2 days and it was good enough for catastrophic situation damage mitigation. Recently, syzbot has found a way (see link) to trigger warnings in filesystem freezing because the code got confused by SB_RDONLY changing under its hands. Since these days we set EXT4_FLAGS_SHUTDOWN on the superblock which is enough to stop all filesystem modifications, modifying SB_RDONLY shouldn't be needed. So stop doing that. |
| CVE-2024-50190 | In the Linux kernel, the following vulnerability has been resolved: ice: fix memleak in ice_init_tx_topology() Fix leak of the FW blob (DDP pkg). Make ice_cfg_tx_topo() const-correct, so ice_init_tx_topology() can avoid copying whole FW blob. Copy just the topology section, and only when needed. Reuse the buffer allocated for the read of the current topology. This was found by kmemleak, with the following trace for each PF: [<ffffffff8761044d>] kmemdup_noprof+0x1d/0x50 [<ffffffffc0a0a480>] ice_init_ddp_config+0x100/0x220 [ice] [<ffffffffc0a0da7f>] ice_init_dev+0x6f/0x200 [ice] [<ffffffffc0a0dc49>] ice_init+0x29/0x560 [ice] [<ffffffffc0a10c1d>] ice_probe+0x21d/0x310 [ice] Constify ice_cfg_tx_topo() @buf parameter. This cascades further down to few more functions. |
| CVE-2024-50189 | In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Switch to device-managed dmam_alloc_coherent() Using the device-managed version allows to simplify clean-up in probe() error path. Additionally, this device-managed ensures proper cleanup, which helps to resolve memory errors, page faults, btrfs going read-only, and btrfs disk corruption. |
| CVE-2024-50188 | In the Linux kernel, the following vulnerability has been resolved: net: phy: dp83869: fix memory corruption when enabling fiber When configuring the fiber port, the DP83869 PHY driver incorrectly calls linkmode_set_bit() with a bit mask (1 << 10) rather than a bit number (10). This corrupts some other memory location -- in case of arm64 the priv pointer in the same structure. Since the advertising flags are updated from supported at the end of the function the incorrect line isn't needed at all and can be removed. |
| CVE-2024-50187 | In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Stop the active perfmon before being destroyed Upon closing the file descriptor, the active performance monitor is not stopped. Although all perfmons are destroyed in `vc4_perfmon_close_file()`, the active performance monitor's pointer (`vc4->active_perfmon`) is still retained. If we open a new file descriptor and submit a few jobs with performance monitors, the driver will attempt to stop the active performance monitor using the stale pointer in `vc4->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. |
| CVE-2024-50186 | In the Linux kernel, the following vulnerability has been resolved: net: explicitly clear the sk pointer, when pf->create fails We have recently noticed the exact same KASAN splat as in commit 6cd4a78d962b ("net: do not leave a dangling sk pointer, when socket creation fails"). The problem is that commit did not fully address the problem, as some pf->create implementations do not use sk_common_release in their error paths. For example, we can use the same reproducer as in the above commit, but changing ping to arping. arping uses AF_PACKET socket and if packet_create fails, it will just sk_free the allocated sk object. While we could chase all the pf->create implementations and make sure they NULL the freed sk object on error from the socket, we can't guarantee future protocols will not make the same mistake. So it is easier to just explicitly NULL the sk pointer upon return from pf->create in __sock_create. We do know that pf->create always releases the allocated sk object on error, so if the pointer is not NULL, it is definitely dangling. |
| CVE-2024-50185 | In the Linux kernel, the following vulnerability has been resolved: mptcp: handle consistently DSS corruption Bugged peer implementation can send corrupted DSS options, consistently hitting a few warning in the data path. Use DEBUG_NET assertions, to avoid the splat on some builds and handle consistently the error, dumping related MIBs and performing fallback and/or reset according to the subflow type. |
| CVE-2024-50184 | In the Linux kernel, the following vulnerability has been resolved: virtio_pmem: Check device status before requesting flush If a pmem device is in a bad status, the driver side could wait for host ack forever in virtio_pmem_flush(), causing the system to hang. So add a status check in the beginning of virtio_pmem_flush() to return early if the device is not activated. |
| CVE-2024-50183 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance Deleting an NPIV instance requires all fabric ndlps to be released before an NPIV's resources can be torn down. Failure to release fabric ndlps beforehand opens kref imbalance race conditions. Fix by forcing the DA_ID to complete synchronously with usage of wait_queue. |
| CVE-2024-50182 | In the Linux kernel, the following vulnerability has been resolved: secretmem: disable memfd_secret() if arch cannot set direct map Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This is the case for example on some arm64 configurations, where marking 4k PTEs in the direct map not present can only be done if the direct map is set up at 4k granularity in the first place (as ARM's break-before-make semantics do not easily allow breaking apart large/gigantic pages). More precisely, on arm64 systems with !can_set_direct_map(), set_direct_map_invalid_noflush() is a no-op, however it returns success (0) instead of an error. This means that memfd_secret will seemingly "work" (e.g. syscall succeeds, you can mmap the fd and fault in pages), but it does not actually achieve its goal of removing its memory from the direct map. Note that with this patch, memfd_secret() will start erroring on systems where can_set_direct_map() returns false (arm64 with CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and CONFIG_KFENCE=n), but that still seems better than the current silent failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most arm64 systems actually have a working memfd_secret() and aren't be affected. From going through the iterations of the original memfd_secret patch series, it seems that disabling the syscall in these scenarios was the intended behavior [1] (preferred over having set_direct_map_invalid_noflush return an error as that would result in SIGBUSes at page-fault time), however the check for it got dropped between v16 [2] and v17 [3], when secretmem moved away from CMA allocations. [1]: https://lore.kernel.org/lkml/[email protected]/ [2]: https://lore.kernel.org/lkml/[email protected]/#t [3]: https://lore.kernel.org/lkml/[email protected]/ |
| CVE-2024-50181 | In the Linux kernel, the following vulnerability has been resolved: clk: imx: Remove CLK_SET_PARENT_GATE for DRAM mux for i.MX7D For i.MX7D DRAM related mux clock, the clock source change should ONLY be done done in low level asm code without accessing DRAM, and then calling clk API to sync the HW clock status with clk tree, it should never touch real clock source switch via clk API, so CLK_SET_PARENT_GATE flag should NOT be added, otherwise, DRAM's clock parent will be disabled when DRAM is active, and system will hang. |
| CVE-2024-50180 | In the Linux kernel, the following vulnerability has been resolved: fbdev: sisfb: Fix strbuf array overflow The values of the variables xres and yres are placed in strbuf. These variables are obtained from strbuf1. The strbuf1 array contains digit characters and a space if the array contains non-digit characters. Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres); more than 16 bytes will be written to strbuf. It is suggested to increase the size of the strbuf array to 24. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-50179 | In the Linux kernel, the following vulnerability has been resolved: ceph: remove the incorrect Fw reference check when dirtying pages When doing the direct-io reads it will also try to mark pages dirty, but for the read path it won't hold the Fw caps and there is case will it get the Fw reference. |
| CVE-2024-50178 | In the Linux kernel, the following vulnerability has been resolved: cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request() Use raw_smp_processor_id() instead of plain smp_processor_id() in do_service_request(), otherwise we may get some errors with the driver enabled: BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/208 caller is loongson3_cpufreq_probe+0x5c/0x250 [loongson3_cpufreq] |
| CVE-2024-50177 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix a UBSAN warning in DML2.1 When programming phantom pipe, since cursor_width is explicity set to 0, this causes calculation logic to trigger overflow for an unsigned int triggering the kernel's UBSAN check as below: [ 40.962845] UBSAN: shift-out-of-bounds in /tmp/amd.EfpumTkO/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3312:34 [ 40.962849] shift exponent 4294967170 is too large for 32-bit type 'unsigned int' [ 40.962852] CPU: 1 PID: 1670 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 40.962854] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F21 01/10/2024 [ 40.962856] Call Trace: [ 40.962857] <TASK> [ 40.962860] dump_stack_lvl+0x48/0x70 [ 40.962870] dump_stack+0x10/0x20 [ 40.962872] __ubsan_handle_shift_out_of_bounds+0x1ac/0x360 [ 40.962878] calculate_cursor_req_attributes.cold+0x1b/0x28 [amdgpu] [ 40.963099] dml_core_mode_support+0x6b91/0x16bc0 [amdgpu] [ 40.963327] ? srso_alias_return_thunk+0x5/0x7f [ 40.963331] ? CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport+0x18b8/0x2790 [amdgpu] [ 40.963534] ? srso_alias_return_thunk+0x5/0x7f [ 40.963536] ? dml_core_mode_support+0xb3db/0x16bc0 [amdgpu] [ 40.963730] dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.963906] ? srso_alias_return_thunk+0x5/0x7f [ 40.963909] ? dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.964078] core_dcn4_mode_support+0x72/0xbf0 [amdgpu] [ 40.964247] dml2_top_optimization_perform_optimization_phase+0x1d3/0x2a0 [amdgpu] [ 40.964420] dml2_build_mode_programming+0x23d/0x750 [amdgpu] [ 40.964587] dml21_validate+0x274/0x770 [amdgpu] [ 40.964761] ? srso_alias_return_thunk+0x5/0x7f [ 40.964763] ? resource_append_dpp_pipes_for_plane_composition+0x27c/0x3b0 [amdgpu] [ 40.964942] dml2_validate+0x504/0x750 [amdgpu] [ 40.965117] ? dml21_copy+0x95/0xb0 [amdgpu] [ 40.965291] ? srso_alias_return_thunk+0x5/0x7f [ 40.965295] dcn401_validate_bandwidth+0x4e/0x70 [amdgpu] [ 40.965491] update_planes_and_stream_state+0x38d/0x5c0 [amdgpu] [ 40.965672] update_planes_and_stream_v3+0x52/0x1e0 [amdgpu] [ 40.965845] ? srso_alias_return_thunk+0x5/0x7f [ 40.965849] dc_update_planes_and_stream+0x71/0xb0 [amdgpu] Fix this by adding a guard for checking cursor width before triggering the size calculation. |
| CVE-2024-50176 | In the Linux kernel, the following vulnerability has been resolved: remoteproc: k3-r5: Fix error handling when power-up failed By simply bailing out, the driver was violating its rule and internal assumptions that either both or no rproc should be initialized. E.g., this could cause the first core to be available but not the second one, leading to crashes on its shutdown later on while trying to dereference that second instance. |
| CVE-2024-50175 | In the Linux kernel, the following vulnerability has been resolved: media: qcom: camss: Remove use_count guard in stop_streaming The use_count check was introduced so that multiple concurrent Raw Data Interfaces RDIs could be driven by different virtual channels VCs on the CSIPHY input driving the video pipeline. This is an invalid use of use_count though as use_count pertains to the number of times a video entity has been opened by user-space not the number of active streams. If use_count and stream-on count don't agree then stop_streaming() will break as is currently the case and has become apparent when using CAMSS with libcamera's released softisp 0.3. The use of use_count like this is a bit hacky and right now breaks regular usage of CAMSS for a single stream case. Stopping qcam results in the splat below, and then it cannot be started again and any attempts to do so fails with -EBUSY. [ 1265.509831] WARNING: CPU: 5 PID: 919 at drivers/media/common/videobuf2/videobuf2-core.c:2183 __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common] ... [ 1265.510630] Call trace: [ 1265.510636] __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common] [ 1265.510648] vb2_core_streamoff+0x24/0xcc [videobuf2_common] [ 1265.510660] vb2_ioctl_streamoff+0x5c/0xa8 [videobuf2_v4l2] [ 1265.510673] v4l_streamoff+0x24/0x30 [videodev] [ 1265.510707] __video_do_ioctl+0x190/0x3f4 [videodev] [ 1265.510732] video_usercopy+0x304/0x8c4 [videodev] [ 1265.510757] video_ioctl2+0x18/0x34 [videodev] [ 1265.510782] v4l2_ioctl+0x40/0x60 [videodev] ... [ 1265.510944] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 0 in active state [ 1265.511175] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 1 in active state [ 1265.511398] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 2 in active st One CAMSS specific way to handle multiple VCs on the same RDI might be: - Reference count each pipeline enable for CSIPHY, CSID, VFE and RDIx. - The video buffers are already associated with msm_vfeN_rdiX so release video buffers when told to do so by stop_streaming. - Only release the power-domains for the CSIPHY, CSID and VFE when their internal refcounts drop. Either way refusing to release video buffers based on use_count is erroneous and should be reverted. The silicon enabling code for selecting VCs is perfectly fine. Its a "known missing feature" that concurrent VCs won't work with CAMSS right now. Initial testing with this code didn't show an error but, SoftISP and "real" usage with Google Hangouts breaks the upstream code pretty quickly, we need to do a partial revert and take another pass at VCs. This commit partially reverts commit 89013969e232 ("media: camss: sm8250: Pipeline starting and stopping for multiple virtual channels") |
| CVE-2024-50174 | In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix race when converting group handle to group object XArray provides it's own internal lock which protects the internal array when entries are being simultaneously added and removed. However there is still a race between retrieving the pointer from the XArray and incrementing the reference count. To avoid this race simply hold the internal XArray lock when incrementing the reference count, this ensures there cannot be a racing call to xa_erase(). |
| CVE-2024-50173 | In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix access to uninitialized variable in tick_ctx_cleanup() The group variable can't be used to retrieve ptdev in our second loop, because it points to the previously iterated list_head, not a valid group. Get the ptdev object from the scheduler instead. |
| CVE-2024-50172 | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix a possible memory leak In bnxt_re_setup_chip_ctx() when bnxt_qplib_map_db_bar() fails driver is not freeing the memory allocated for "rdev->chip_ctx". |
| CVE-2024-50171 | In the Linux kernel, the following vulnerability has been resolved: net: systemport: fix potential memory leak in bcm_sysport_xmit() The bcm_sysport_xmit() returns NETDEV_TX_OK without freeing skb in case of dma_map_single() fails, add dev_kfree_skb() to fix it. |
| CVE-2024-50170 | In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix potential memory leak in bcmasp_xmit() The bcmasp_xmit() returns NETDEV_TX_OK without freeing skb in case of mapping fails, add dev_kfree_skb() to fix it. |
| CVE-2024-50169 | In the Linux kernel, the following vulnerability has been resolved: vsock: Update rx_bytes on read_skb() Make sure virtio_transport_inc_rx_pkt() and virtio_transport_dec_rx_pkt() calls are balanced (i.e. virtio_vsock_sock::rx_bytes doesn't lie) after vsock_transport::read_skb(). While here, also inform the peer that we've freed up space and it has more credit. Failing to update rx_bytes after packet is dequeued leads to a warning on SOCK_STREAM recv(): [ 233.396654] rx_queue is empty, but rx_bytes is non-zero [ 233.396702] WARNING: CPU: 11 PID: 40601 at net/vmw_vsock/virtio_transport_common.c:589 |
| CVE-2024-50168 | In the Linux kernel, the following vulnerability has been resolved: net/sun3_82586: fix potential memory leak in sun3_82586_send_packet() The sun3_82586_send_packet() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb() to fix it. |
| CVE-2024-50167 | In the Linux kernel, the following vulnerability has been resolved: be2net: fix potential memory leak in be_xmit() The be_xmit() returns NETDEV_TX_OK without freeing skb in case of be_xmit_enqueue() fails, add dev_kfree_skb_any() to fix it. |
| CVE-2024-50166 | In the Linux kernel, the following vulnerability has been resolved: fsl/fman: Fix refcount handling of fman-related devices In mac_probe() there are multiple calls to of_find_device_by_node(), fman_bind() and fman_port_bind() which takes references to of_dev->dev. Not all references taken by these calls are released later on error path in mac_probe() and in mac_remove() which lead to reference leaks. Add references release. |
| CVE-2024-50165 | In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve param->string when parsing mount options In bpf_parse_param(), keep the value of param->string intact so it can be freed later. Otherwise, the kmalloc area pointed to by param->string will be leaked as shown below: unreferenced object 0xffff888118c46d20 (size 8): comm "new_name", pid 12109, jiffies 4295580214 hex dump (first 8 bytes): 61 6e 79 00 38 c9 5c 7e any.8.\~ backtrace (crc e1b7f876): [<00000000c6848ac7>] kmemleak_alloc+0x4b/0x80 [<00000000de9f7d00>] __kmalloc_node_track_caller_noprof+0x36e/0x4a0 [<000000003e29b886>] memdup_user+0x32/0xa0 [<0000000007248326>] strndup_user+0x46/0x60 [<0000000035b3dd29>] __x64_sys_fsconfig+0x368/0x3d0 [<0000000018657927>] x64_sys_call+0xff/0x9f0 [<00000000c0cabc95>] do_syscall_64+0x3b/0xc0 [<000000002f331597>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| CVE-2024-50164 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overloading of MEM_UNINIT's meaning Lonial reported an issue in the BPF verifier where check_mem_size_reg() has the following code: if (!tnum_is_const(reg->var_off)) /* For unprivileged variable accesses, disable raw * mode so that the program is required to * initialize all the memory that the helper could * just partially fill up. */ meta = NULL; This means that writes are not checked when the register containing the size of the passed buffer has not a fixed size. Through this bug, a BPF program can write to a map which is marked as read-only, for example, .rodata global maps. The problem is that MEM_UNINIT's initial meaning that "the passed buffer to the BPF helper does not need to be initialized" which was added back in commit 435faee1aae9 ("bpf, verifier: add ARG_PTR_TO_RAW_STACK type") got overloaded over time with "the passed buffer is being written to". The problem however is that checks such as the above which were added later via 06c1c049721a ("bpf: allow helpers access to variable memory") set meta to NULL in order force the user to always initialize the passed buffer to the helper. Due to the current double meaning of MEM_UNINIT, this bypasses verifier write checks to the memory (not boundary checks though) and only assumes the latter memory is read instead. Fix this by reverting MEM_UNINIT back to its original meaning, and having MEM_WRITE as an annotation to BPF helpers in order to then trigger the BPF verifier checks for writing to memory. Some notes: check_arg_pair_ok() ensures that for ARG_CONST_SIZE{,_OR_ZERO} we can access fn->arg_type[arg - 1] since it must contain a preceding ARG_PTR_TO_MEM. For check_mem_reg() the meta argument can be removed altogether since we do check both BPF_READ and BPF_WRITE. Same for the equivalent check_kfunc_mem_size_reg(). |
| CVE-2024-50163 | In the Linux kernel, the following vulnerability has been resolved: bpf: Make sure internal and UAPI bpf_redirect flags don't overlap The bpf_redirect_info is shared between the SKB and XDP redirect paths, and the two paths use the same numeric flag values in the ri->flags field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that if skb bpf_redirect_neigh() is used with a non-NULL params argument and, subsequently, an XDP redirect is performed using the same bpf_redirect_info struct, the XDP path will get confused and end up crashing, which syzbot managed to trigger. With the stack-allocated bpf_redirect_info, the structure is no longer shared between the SKB and XDP paths, so the crash doesn't happen anymore. However, different code paths using identically-numbered flag values in the same struct field still seems like a bit of a mess, so this patch cleans that up by moving the flag definitions together and redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make sure the overlap is not re-introduced by mistake. |
| CVE-2024-50162 | In the Linux kernel, the following vulnerability has been resolved: bpf: devmap: provide rxq after redirect rxq contains a pointer to the device from where the redirect happened. Currently, the BPF program that was executed after a redirect via BPF_MAP_TYPE_DEVMAP* does not have it set. This is particularly bad since accessing ingress_ifindex, e.g. SEC("xdp") int prog(struct xdp_md *pkt) { return bpf_redirect_map(&dev_redirect_map, 0, 0); } SEC("xdp/devmap") int prog_after_redirect(struct xdp_md *pkt) { bpf_printk("ifindex %i", pkt->ingress_ifindex); return XDP_PASS; } depends on access to rxq, so a NULL pointer gets dereferenced: <1>[ 574.475170] BUG: kernel NULL pointer dereference, address: 0000000000000000 <1>[ 574.475188] #PF: supervisor read access in kernel mode <1>[ 574.475194] #PF: error_code(0x0000) - not-present page <6>[ 574.475199] PGD 0 P4D 0 <4>[ 574.475207] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI <4>[ 574.475217] CPU: 4 UID: 0 PID: 217 Comm: kworker/4:1 Not tainted 6.11.0-rc5-reduced-00859-g780801200300 #23 <4>[ 574.475226] Hardware name: Intel(R) Client Systems NUC13ANHi7/NUC13ANBi7, BIOS ANRPL357.0026.2023.0314.1458 03/14/2023 <4>[ 574.475231] Workqueue: mld mld_ifc_work <4>[ 574.475247] RIP: 0010:bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c <4>[ 574.475257] Code: cc cc cc cc cc cc cc 80 00 00 00 cc cc cc cc cc cc cc cc f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 57 20 <48> 8b 52 00 8b 92 e0 00 00 00 48 bf f8 a6 d5 c4 5d a0 ff ff be 0b <4>[ 574.475263] RSP: 0018:ffffa62440280c98 EFLAGS: 00010206 <4>[ 574.475269] RAX: ffffa62440280cd8 RBX: 0000000000000001 RCX: 0000000000000000 <4>[ 574.475274] RDX: 0000000000000000 RSI: ffffa62440549048 RDI: ffffa62440280ce0 <4>[ 574.475278] RBP: ffffa62440280c98 R08: 0000000000000002 R09: 0000000000000001 <4>[ 574.475281] R10: ffffa05dc8b98000 R11: ffffa05f577fca40 R12: ffffa05dcab24000 <4>[ 574.475285] R13: ffffa62440280ce0 R14: ffffa62440549048 R15: ffffa62440549000 <4>[ 574.475289] FS: 0000000000000000(0000) GS:ffffa05f4f700000(0000) knlGS:0000000000000000 <4>[ 574.475294] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 574.475298] CR2: 0000000000000000 CR3: 000000025522e000 CR4: 0000000000f50ef0 <4>[ 574.475303] PKRU: 55555554 <4>[ 574.475306] Call Trace: <4>[ 574.475313] <IRQ> <4>[ 574.475318] ? __die+0x23/0x70 <4>[ 574.475329] ? page_fault_oops+0x180/0x4c0 <4>[ 574.475339] ? skb_pp_cow_data+0x34c/0x490 <4>[ 574.475346] ? kmem_cache_free+0x257/0x280 <4>[ 574.475357] ? exc_page_fault+0x67/0x150 <4>[ 574.475368] ? asm_exc_page_fault+0x26/0x30 <4>[ 574.475381] ? bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c <4>[ 574.475386] bq_xmit_all+0x158/0x420 <4>[ 574.475397] __dev_flush+0x30/0x90 <4>[ 574.475407] veth_poll+0x216/0x250 [veth] <4>[ 574.475421] __napi_poll+0x28/0x1c0 <4>[ 574.475430] net_rx_action+0x32d/0x3a0 <4>[ 574.475441] handle_softirqs+0xcb/0x2c0 <4>[ 574.475451] do_softirq+0x40/0x60 <4>[ 574.475458] </IRQ> <4>[ 574.475461] <TASK> <4>[ 574.475464] __local_bh_enable_ip+0x66/0x70 <4>[ 574.475471] __dev_queue_xmit+0x268/0xe40 <4>[ 574.475480] ? selinux_ip_postroute+0x213/0x420 <4>[ 574.475491] ? alloc_skb_with_frags+0x4a/0x1d0 <4>[ 574.475502] ip6_finish_output2+0x2be/0x640 <4>[ 574.475512] ? nf_hook_slow+0x42/0xf0 <4>[ 574.475521] ip6_finish_output+0x194/0x300 <4>[ 574.475529] ? __pfx_ip6_finish_output+0x10/0x10 <4>[ 574.475538] mld_sendpack+0x17c/0x240 <4>[ 574.475548] mld_ifc_work+0x192/0x410 <4>[ 574.475557] process_one_work+0x15d/0x380 <4>[ 574.475566] worker_thread+0x29d/0x3a0 <4>[ 574.475573] ? __pfx_worker_thread+0x10/0x10 <4>[ 574.475580] ? __pfx_worker_thread+0x10/0x10 <4>[ 574.475587] kthread+0xcd/0x100 <4>[ 574.475597] ? __pfx_kthread+0x10/0x10 <4>[ 574.475606] ret_from_fork+0x31/0x50 <4>[ 574.475615] ? __pfx_kthread+0x10/0x10 <4>[ 574.475623] ret_from_fork_asm+0x1a/0x ---truncated--- |
| CVE-2024-50161 | In the Linux kernel, the following vulnerability has been resolved: bpf: Check the remaining info_cnt before repeating btf fields When trying to repeat the btf fields for array of nested struct, it doesn't check the remaining info_cnt. The following splat will be reported when the value of ret * nelems is greater than BTF_FIELDS_MAX: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ../kernel/bpf/btf.c:3951:49 index 11 is out of range for type 'btf_field_info [11]' CPU: 6 UID: 0 PID: 411 Comm: test_progs ...... 6.11.0-rc4+ #1 Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: <TASK> dump_stack_lvl+0x57/0x70 dump_stack+0x10/0x20 ubsan_epilogue+0x9/0x40 __ubsan_handle_out_of_bounds+0x6f/0x80 ? kallsyms_lookup_name+0x48/0xb0 btf_parse_fields+0x992/0xce0 map_create+0x591/0x770 __sys_bpf+0x229/0x2410 __x64_sys_bpf+0x1f/0x30 x64_sys_call+0x199/0x9f0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fea56f2cc5d ...... </TASK> ---[ end trace ]--- Fix it by checking the remaining info_cnt in btf_repeat_fields() before repeating the btf fields. |
| CVE-2024-50160 | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs8409: Fix possible NULL dereference If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then NULL pointer dereference will occur in the next line. Since dolphin_fixups function is a hda_fixup function which is not supposed to return any errors, add simple check before dereference, ignore the fail. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-50159 | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix the double free in scmi_debugfs_common_setup() Clang static checker(scan-build) throws below warning： | drivers/firmware/arm_scmi/driver.c:line 2915, column 2 | Attempt to free released memory. When devm_add_action_or_reset() fails, scmi_debugfs_common_cleanup() will run twice which causes double free of 'dbg->name'. Remove the redundant scmi_debugfs_common_cleanup() to fix this problem. |
| CVE-2024-50158 | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix out of bound check Driver exports pacing stats only on GenP5 and P7 adapters. But while parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This caused a trace when KASAN is enabled. BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re] Write of size 8 at addr ffff8885942a6340 by task modprobe/4809 |
| CVE-2024-50157 | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop Driver waits indefinitely for the fifo occupancy to go below a threshold as soon as the pacing interrupt is received. This can cause soft lockup on one of the processors, if the rate of DB is very high. Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th if the loop is taking more time. Pacing will be continuing until the occupancy is below the threshold. This is ensured by the checks in bnxt_re_pacing_timer_exp and further scheduling the work for pacing based on the fifo occupancy. |
| CVE-2024-50156 | In the Linux kernel, the following vulnerability has been resolved: drm/msm: Avoid NULL dereference in msm_disp_state_print_regs() If the allocation in msm_disp_state_dump_regs() failed then `block->state` can be NULL. The msm_disp_state_print_regs() function _does_ have code to try to handle it with: if (*reg) dump_addr = *reg; ...but since "dump_addr" is initialized to NULL the above is actually a noop. The code then goes on to dereference `dump_addr`. Make the function print "Registers not stored" when it sees a NULL to solve this. Since we're touching the code, fix msm_disp_state_print_regs() not to pointlessly take a double-pointer and properly mark the pointer as `const`. Patchwork: https://patchwork.freedesktop.org/patch/619657/ |
| CVE-2024-50155 | In the Linux kernel, the following vulnerability has been resolved: netdevsim: use cond_resched() in nsim_dev_trap_report_work() I am still seeing many syzbot reports hinting that syzbot might fool nsim_dev_trap_report_work() with hundreds of ports [1] Lets use cond_resched(), and system_unbound_wq instead of implicit system_wq. [1] INFO: task syz-executor:20633 blocked for more than 143 seconds. Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc7222 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor state:D stack:25856 pid:20633 tgid:20633 ppid:1 flags:0x00004006 ... NMI backtrace for cpu 1 CPU: 1 UID: 0 PID: 16760 Comm: kworker/1:0 Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc7222 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events nsim_dev_trap_report_work RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:210 Code: 89 fb e8 23 00 00 00 48 8b 3d 04 fb 9c 0c 48 89 de 5b e9 c3 c7 5d 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <f3> 0f 1e fa 48 8b 04 24 65 48 8b 0c 25 c0 d7 03 00 65 8b 15 60 f0 RSP: 0018:ffffc90000a187e8 EFLAGS: 00000246 RAX: 0000000000000100 RBX: ffffc90000a188e0 RCX: ffff888027d3bc00 RDX: ffff888027d3bc00 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88804a2e6000 R08: ffffffff8a4bc495 R09: ffffffff89da3577 R10: 0000000000000004 R11: ffffffff8a4bc2b0 R12: dffffc0000000000 R13: ffff88806573b503 R14: dffffc0000000000 R15: ffff8880663cca00 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc90a747f98 CR3: 000000000e734000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 000000000000002b DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 spin_unlock_bh include/linux/spinlock.h:396 [inline] nsim_dev_trap_report drivers/net/netdevsim/dev.c:820 [inline] nsim_dev_trap_report_work+0x75d/0xaa0 drivers/net/netdevsim/dev.c:850 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> |
| CVE-2024-50154 | In the Linux kernel, the following vulnerability has been resolved: tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink(). Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler(). """ We are seeing a use-after-free from a bpf prog attached to trace_tcp_retransmit_synack. The program passes the req->sk to the bpf_sk_storage_get_tracing kernel helper which does check for null before using it. """ The commit 83fccfc3940c ("inet: fix potential deadlock in reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not to call del_timer_sync() from reqsk_timer_handler(), but it introduced a small race window. Before the timer is called, expire_timers() calls detach_timer(timer, true) to clear timer->entry.pprev and marks it as not pending. If reqsk_queue_unlink() checks timer_pending() just after expire_timers() calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will continue running and send multiple SYN+ACKs until it expires. The reported UAF could happen if req->sk is close()d earlier than the timer expiration, which is 63s by default. The scenario would be 1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(), but del_timer_sync() is missed 2. reqsk timer is executed and scheduled again 3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but reqsk timer still has another one, and inet_csk_accept() does not clear req->sk for non-TFO sockets 4. sk is close()d 5. reqsk timer is executed again, and BPF touches req->sk Let's not use timer_pending() by passing the caller context to __inet_csk_reqsk_queue_drop(). Note that reqsk timer is pinned, so the issue does not happen in most use cases. [1] [0] BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0 Use-after-free read at 0x00000000a891fb3a (in kfence-#1): bpf_sk_storage_get_tracing+0x2e/0x1b0 bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda bpf_trace_run2+0x4c/0xc0 tcp_rtx_synack+0xf9/0x100 reqsk_timer_handler+0xda/0x3d0 run_timer_softirq+0x292/0x8a0 irq_exit_rcu+0xf5/0x320 sysvec_apic_timer_interrupt+0x6d/0x80 asm_sysvec_apic_timer_interrupt+0x16/0x20 intel_idle_irq+0x5a/0xa0 cpuidle_enter_state+0x94/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6 allocated by task 0 on cpu 9 at 260507.901592s: sk_prot_alloc+0x35/0x140 sk_clone_lock+0x1f/0x3f0 inet_csk_clone_lock+0x15/0x160 tcp_create_openreq_child+0x1f/0x410 tcp_v6_syn_recv_sock+0x1da/0x700 tcp_check_req+0x1fb/0x510 tcp_v6_rcv+0x98b/0x1420 ipv6_list_rcv+0x2258/0x26e0 napi_complete_done+0x5b1/0x2990 mlx5e_napi_poll+0x2ae/0x8d0 net_rx_action+0x13e/0x590 irq_exit_rcu+0xf5/0x320 common_interrupt+0x80/0x90 asm_common_interrupt+0x22/0x40 cpuidle_enter_state+0xfb/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb freed by task 0 on cpu 9 at 260507.927527s: rcu_core_si+0x4ff/0xf10 irq_exit_rcu+0xf5/0x320 sysvec_apic_timer_interrupt+0x6d/0x80 asm_sysvec_apic_timer_interrupt+0x16/0x20 cpuidle_enter_state+0xfb/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb |
| CVE-2024-50153 | In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix null-ptr-deref in target_alloc_device() There is a null-ptr-deref issue reported by KASAN: BUG: KASAN: null-ptr-deref in target_alloc_device+0xbc4/0xbe0 [target_core_mod] ... kasan_report+0xb9/0xf0 target_alloc_device+0xbc4/0xbe0 [target_core_mod] core_dev_setup_virtual_lun0+0xef/0x1f0 [target_core_mod] target_core_init_configfs+0x205/0x420 [target_core_mod] do_one_initcall+0xdd/0x4e0 ... entry_SYSCALL_64_after_hwframe+0x76/0x7e In target_alloc_device(), if allocing memory for dev queues fails, then dev will be freed by dev->transport->free_device(), but dev->transport is not initialized at that time, which will lead to a null pointer reference problem. Fixing this bug by freeing dev with hba->backend->ops->free_device(). |
| CVE-2024-50152 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix possible double free in smb2_set_ea() Clang static checker(scan-build) warning： fs/smb/client/smb2ops.c:1304:2: Attempt to free released memory. 1304 | kfree(ea); | ^~~~~~~~~ There is a double free in such case: 'ea is initialized to NULL' -> 'first successful memory allocation for ea' -> 'something failed, goto sea_exit' -> 'first memory release for ea' -> 'goto replay_again' -> 'second goto sea_exit before allocate memory for ea' -> 'second memory release for ea resulted in double free'. Re-initialie 'ea' to NULL near to the replay_again label, it can fix this double free problem. |
| CVE-2024-50151 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOBs when building SMB2_IOCTL request When using encryption, either enforced by the server or when using 'seal' mount option, the client will squash all compound request buffers down for encryption into a single iov in smb2_set_next_command(). SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the SMB2_IOCTL request in the first iov, and if the user passes an input buffer that is greater than 328 bytes, smb2_set_next_command() will end up writing off the end of @rqst->iov[0].iov_base as shown below: mount.cifs //srv/share /mnt -o ...,seal ln -s $(perl -e "print('a')for 1..1024") /mnt/link BUG: KASAN: slab-out-of-bounds in smb2_set_next_command.cold+0x1d6/0x24c [cifs] Write of size 4116 at addr ffff8881148fcab8 by task ln/859 CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] print_report+0x156/0x4d9 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] ? __virt_addr_valid+0x145/0x310 ? __phys_addr+0x46/0x90 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_report+0xda/0x110 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_check_range+0x10f/0x1f0 __asan_memcpy+0x3c/0x60 smb2_set_next_command.cold+0x1d6/0x24c [cifs] smb2_compound_op+0x238c/0x3840 [cifs] ? kasan_save_track+0x14/0x30 ? kasan_save_free_info+0x3b/0x70 ? vfs_symlink+0x1a1/0x2c0 ? do_symlinkat+0x108/0x1c0 ? __pfx_smb2_compound_op+0x10/0x10 [cifs] ? kmem_cache_free+0x118/0x3e0 ? cifs_get_writable_path+0xeb/0x1a0 [cifs] smb2_get_reparse_inode+0x423/0x540 [cifs] ? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs] ? rcu_is_watching+0x20/0x50 ? __kmalloc_noprof+0x37c/0x480 ? smb2_create_reparse_symlink+0x257/0x490 [cifs] ? smb2_create_reparse_symlink+0x38f/0x490 [cifs] smb2_create_reparse_symlink+0x38f/0x490 [cifs] ? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs] ? find_held_lock+0x8a/0xa0 ? hlock_class+0x32/0xb0 ? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs] cifs_symlink+0x24f/0x960 [cifs] ? __pfx_make_vfsuid+0x10/0x10 ? __pfx_cifs_symlink+0x10/0x10 [cifs] ? make_vfsgid+0x6b/0xc0 ? generic_permission+0x96/0x2d0 vfs_symlink+0x1a1/0x2c0 do_symlinkat+0x108/0x1c0 ? __pfx_do_symlinkat+0x10/0x10 ? strncpy_from_user+0xaa/0x160 __x64_sys_symlinkat+0xb9/0xf0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08d75c13bb |
| CVE-2024-50150 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmode should keep reference to parent The altmode device release refers to its parent device, but without keeping a reference to it. When registering the altmode, get a reference to the parent and put it in the release function. Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues like this: [ 43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000) [ 43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000) [ 46.612867] ================================================================== [ 46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129 [ 46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48 [ 46.614538] [ 46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535 [ 46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 46.616042] Workqueue: events kobject_delayed_cleanup [ 46.616446] Call Trace: [ 46.616648] <TASK> [ 46.616820] dump_stack_lvl+0x5b/0x7c [ 46.617112] ? typec_altmode_release+0x38/0x129 [ 46.617470] print_report+0x14c/0x49e [ 46.617769] ? rcu_read_unlock_sched+0x56/0x69 [ 46.618117] ? __virt_addr_valid+0x19a/0x1ab [ 46.618456] ? kmem_cache_debug_flags+0xc/0x1d [ 46.618807] ? typec_altmode_release+0x38/0x129 [ 46.619161] kasan_report+0x8d/0xb4 [ 46.619447] ? typec_altmode_release+0x38/0x129 [ 46.619809] ? process_scheduled_works+0x3cb/0x85f [ 46.620185] typec_altmode_release+0x38/0x129 [ 46.620537] ? process_scheduled_works+0x3cb/0x85f [ 46.620907] device_release+0xaf/0xf2 [ 46.621206] kobject_delayed_cleanup+0x13b/0x17a [ 46.621584] process_scheduled_works+0x4f6/0x85f [ 46.621955] ? __pfx_process_scheduled_works+0x10/0x10 [ 46.622353] ? hlock_class+0x31/0x9a [ 46.622647] ? lock_acquired+0x361/0x3c3 [ 46.622956] ? move_linked_works+0x46/0x7d [ 46.623277] worker_thread+0x1ce/0x291 [ 46.623582] ? __kthread_parkme+0xc8/0xdf [ 46.623900] ? __pfx_worker_thread+0x10/0x10 [ 46.624236] kthread+0x17e/0x190 [ 46.624501] ? kthread+0xfb/0x190 [ 46.624756] ? __pfx_kthread+0x10/0x10 [ 46.625015] ret_from_fork+0x20/0x40 [ 46.625268] ? __pfx_kthread+0x10/0x10 [ 46.625532] ret_from_fork_asm+0x1a/0x30 [ 46.625805] </TASK> [ 46.625953] [ 46.626056] Allocated by task 678: [ 46.626287] kasan_save_stack+0x24/0x44 [ 46.626555] kasan_save_track+0x14/0x2d [ 46.626811] __kasan_kmalloc+0x3f/0x4d [ 46.627049] __kmalloc_noprof+0x1bf/0x1f0 [ 46.627362] typec_register_port+0x23/0x491 [ 46.627698] cros_typec_probe+0x634/0xbb6 [ 46.628026] platform_probe+0x47/0x8c [ 46.628311] really_probe+0x20a/0x47d [ 46.628605] device_driver_attach+0x39/0x72 [ 46.628940] bind_store+0x87/0xd7 [ 46.629213] kernfs_fop_write_iter+0x1aa/0x218 [ 46.629574] vfs_write+0x1d6/0x29b [ 46.629856] ksys_write+0xcd/0x13b [ 46.630128] do_syscall_64+0xd4/0x139 [ 46.630420] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 46.630820] [ 46.630946] Freed by task 48: [ 46.631182] kasan_save_stack+0x24/0x44 [ 46.631493] kasan_save_track+0x14/0x2d [ 46.631799] kasan_save_free_info+0x3f/0x4d [ 46.632144] __kasan_slab_free+0x37/0x45 [ 46.632474] ---truncated--- |
| CVE-2024-50149 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't free job in TDR Freeing job in TDR is not safe as TDR can pass the run_job thread resulting in UAF. It is only safe for free job to naturally be called by the scheduler. Rather free job in TDR, add to pending list. (cherry picked from commit ea2f6a77d0c40d97f4a4dc93fee4afe15d94926d) |
| CVE-2024-50148 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: fix wild-memory-access in proto_unregister There's issue as follows: KASAN: maybe wild-memory-access in range [0xdead...108-0xdead...10f] CPU: 3 UID: 0 PID: 2805 Comm: rmmod Tainted: G W RIP: 0010:proto_unregister+0xee/0x400 Call Trace: <TASK> __do_sys_delete_module+0x318/0x580 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f As bnep_init() ignore bnep_sock_init()'s return value, and bnep_sock_init() will cleanup all resource. Then when remove bnep module will call bnep_sock_cleanup() to cleanup sock's resource. To solve above issue just return bnep_sock_init()'s return value in bnep_exit(). |
| CVE-2024-50147 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix command bitmask initialization Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit isn't Initialize during command bitmask Initialization, only during MANAGE_PAGES. In addition, mlx5_cmd_trigger_completions() is trying to trigger completion for MANAGE_PAGES command as well. Hence, in case health error occurred before any MANAGE_PAGES command have been invoke (for example, during mlx5_enable_hca()), mlx5_cmd_trigger_completions() will try to trigger completion for MANAGE_PAGES command, which will result in null-ptr-deref error.[1] Fix it by Initialize command bitmask correctly. While at it, re-write the code for better understanding. [1] BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core] Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078 CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x7e/0xc0 kasan_report+0xb9/0xf0 kasan_check_range+0xec/0x190 mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core] mlx5_cmd_flush+0x94/0x240 [mlx5_core] enter_error_state+0x6c/0xd0 [mlx5_core] mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core] process_one_work+0x787/0x1490 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0xda0/0xda0 ? assign_work+0x168/0x240 worker_thread+0x586/0xd30 ? rescuer_thread+0xae0/0xae0 kthread+0x2df/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> |
| CVE-2024-50146 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Don't call cleanup on profile rollback failure When profile rollback fails in mlx5e_netdev_change_profile, the netdev profile var is left set to NULL. Avoid a crash when unloading the driver by not calling profile->cleanup in such a case. This was encountered while testing, with the original trigger that the wq rescuer thread creation got interrupted (presumably due to Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by mlx5e_priv_init, the profile rollback also fails for the same reason (signal still active) so the profile is left as NULL, leading to a crash later in _mlx5e_remove. [ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2) [ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12 [ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 [ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 745.538222] #PF: supervisor read access in kernel mode <snipped> [ 745.551290] Call Trace: [ 745.551590] <TASK> [ 745.551866] ? __die+0x20/0x60 [ 745.552218] ? page_fault_oops+0x150/0x400 [ 745.555307] ? exc_page_fault+0x79/0x240 [ 745.555729] ? asm_exc_page_fault+0x22/0x30 [ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core] [ 745.556698] auxiliary_bus_remove+0x18/0x30 [ 745.557134] device_release_driver_internal+0x1df/0x240 [ 745.557654] bus_remove_device+0xd7/0x140 [ 745.558075] device_del+0x15b/0x3c0 [ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core] [ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core] [ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core] [ 745.560203] remove_one+0x4e/0xd0 [mlx5_core] [ 745.560694] pci_device_remove+0x39/0xa0 [ 745.561112] device_release_driver_internal+0x1df/0x240 [ 745.561631] driver_detach+0x47/0x90 [ 745.562022] bus_remove_driver+0x84/0x100 [ 745.562444] pci_unregister_driver+0x3b/0x90 [ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core] [ 745.563415] __x64_sys_delete_module+0x14d/0x2f0 [ 745.563886] ? kmem_cache_free+0x1b0/0x460 [ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190 [ 745.564825] do_syscall_64+0x6d/0x140 [ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 745.565725] RIP: 0033:0x7f1579b1288b |
| CVE-2024-50145 | In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Add SKB allocation failures handling in __octep_oq_process_rx() build_skb() returns NULL in case of a memory allocation failure so handle it inside __octep_oq_process_rx() to avoid NULL pointer dereference. __octep_oq_process_rx() is called during NAPI polling by the driver. If skb allocation fails, keep on pulling packets out of the Rx DMA queue: we shouldn't break the polling immediately and thus falsely indicate to the octep_napi_poll() that the Rx pressure is going down. As there is no associated skb in this case, don't process the packets and don't push them up the network stack - they are skipped. Helper function is implemented to unmmap/flush all the fragment buffers used by the dropped packet. 'alloc_failures' counter is incremented to mark the skb allocation error in driver statistics. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-50144 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: fix unbalanced rpm put() with fence_fini() Currently we can call fence_fini() twice if something goes wrong when sending the GuC CT for the tlb request, since we signal the fence and return an error, leading to the caller also calling fini() on the error path in the case of stack version of the flow, which leads to an extra rpm put() which might later cause device to enter suspend when it shouldn't. It looks like we can just drop the fini() call since the fence signaller side will already call this for us. There are known mysterious splats with device going to sleep even with an rpm ref, and this could be one candidate. v2 (Matt B): - Prefer warning if we detect double fini() (cherry picked from commit cfcbc0520d5055825f0647ab922b655688605183) |
| CVE-2024-50143 | In the Linux kernel, the following vulnerability has been resolved: udf: fix uninit-value use in udf_get_fileshortad Check for overflow when computing alen in udf_current_aext to mitigate later uninit-value use in udf_get_fileshortad KMSAN bug[1]. After applying the patch reproducer did not trigger any issue[2]. [1] https://syzkaller.appspot.com/bug?extid=8901c4560b7ab5c2f9df [2] https://syzkaller.appspot.com/x/log.txt?x=10242227980000 |
| CVE-2024-50142 | In the Linux kernel, the following vulnerability has been resolved: xfrm: validate new SA's prefixlen using SA family when sel.family is unset This expands the validation introduced in commit 07bf7908950a ("xfrm: Validate address prefix lengths in the xfrm selector.") syzbot created an SA with usersa.sel.family = AF_UNSPEC usersa.sel.prefixlen_s = 128 usersa.family = AF_INET Because of the AF_UNSPEC selector, verify_newsa_info doesn't put limits on prefixlen_{s,d}. But then copy_from_user_state sets x->sel.family to usersa.family (AF_INET). Do the same conversion in verify_newsa_info before validating prefixlen_{s,d}, since that's how prefixlen is going to be used later on. |
| CVE-2024-50141 | In the Linux kernel, the following vulnerability has been resolved: ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context PRMT needs to find the correct type of block to translate the PA-VA mapping for EFI runtime services. The issue arises because the PRMT is finding a block of type EFI_CONVENTIONAL_MEMORY, which is not appropriate for runtime services as described in Section 2.2.2 (Runtime Services) of the UEFI Specification [1]. Since the PRM handler is a type of runtime service, this causes an exception when the PRM handler is called. [Firmware Bug]: Unable to handle paging request in EFI runtime service WARNING: CPU: 22 PID: 4330 at drivers/firmware/efi/runtime-wrappers.c:341 __efi_queue_work+0x11c/0x170 Call trace: Let PRMT find a block with EFI_MEMORY_RUNTIME for PRM handler and PRM context. If no suitable block is found, a warning message will be printed, but the procedure continues to manage the next PRM handler. However, if the PRM handler is actually called without proper allocation, it would result in a failure during error handling. By using the correct memory types for runtime services, ensure that the PRM handler and the context are properly mapped in the virtual address space during runtime, preventing the paging request error. The issue is really that only memory that has been remapped for runtime by the firmware can be used by the PRM handler, and so the region needs to have the EFI_MEMORY_RUNTIME attribute. [ rjw: Subject and changelog edits ] |
| CVE-2024-50140 | In the Linux kernel, the following vulnerability has been resolved: sched/core: Disable page allocation in task_tick_mm_cid() With KASAN and PREEMPT_RT enabled, calling task_work_add() in task_tick_mm_cid() may cause the following splat. [ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe [ 63.696416] preempt_count: 10001, expected: 0 [ 63.696416] RCU nest depth: 1, expected: 1 This problem is caused by the following call trace. sched_tick() [ acquire rq->__lock ] -> task_tick_mm_cid() -> task_work_add() -> __kasan_record_aux_stack() -> kasan_save_stack() -> stack_depot_save_flags() -> alloc_pages_mpol_noprof() -> __alloc_pages_noprof() -> get_page_from_freelist() -> rmqueue() -> rmqueue_pcplist() -> __rmqueue_pcplist() -> rmqueue_bulk() -> rt_spin_lock() The rq lock is a raw_spinlock_t. We can't sleep while holding it. IOW, we can't call alloc_pages() in stack_depot_save_flags(). The task_tick_mm_cid() function with its task_work_add() call was introduced by commit 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid") in v6.4 kernel. Fortunately, there is a kasan_record_aux_stack_noalloc() variant that calls stack_depot_save_flags() while not allowing it to allocate new pages. To allow task_tick_mm_cid() to use task_work without page allocation, a new TWAF_NO_ALLOC flag is added to enable calling kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack() if set. The task_tick_mm_cid() function is modified to add this new flag. The possible downside is the missing stack trace in a KASAN report due to new page allocation required when task_work_add_noallloc() is called which should be rare. |
| CVE-2024-50139 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix shift-out-of-bounds bug Fix a shift-out-of-bounds bug reported by UBSAN when running VM with MTE enabled host kernel. UBSAN: shift-out-of-bounds in arch/arm64/kvm/sys_regs.c:1988:14 shift exponent 33 is too large for 32-bit type 'int' CPU: 26 UID: 0 PID: 7629 Comm: qemu-kvm Not tainted 6.12.0-rc2 #34 Hardware name: IEI NF5280R7/Mitchell MB, BIOS 00.00. 2024-10-12 09:28:54 10/14/2024 Call trace: dump_backtrace+0xa0/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x74/0x90 dump_stack+0x18/0x28 __ubsan_handle_shift_out_of_bounds+0xf8/0x1e0 reset_clidr+0x10c/0x1c8 kvm_reset_sys_regs+0x50/0x1c8 kvm_reset_vcpu+0xec/0x2b0 __kvm_vcpu_set_target+0x84/0x158 kvm_vcpu_set_target+0x138/0x168 kvm_arch_vcpu_ioctl_vcpu_init+0x40/0x2b0 kvm_arch_vcpu_ioctl+0x28c/0x4b8 kvm_vcpu_ioctl+0x4bc/0x7a8 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x70/0x100 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x158 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x194/0x198 |
| CVE-2024-50138 | In the Linux kernel, the following vulnerability has been resolved: bpf: Use raw_spinlock_t in ringbuf The function __bpf_ringbuf_reserve is invoked from a tracepoint, which disables preemption. Using spinlock_t in this context can lead to a "sleep in atomic" warning in the RT variant. This issue is illustrated in the example below: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 556208, name: test_progs preempt_count: 1, expected: 0 RCU nest depth: 1, expected: 1 INFO: lockdep is turned off. Preemption disabled at: [<ffffd33a5c88ea44>] migrate_enable+0xc0/0x39c CPU: 7 PID: 556208 Comm: test_progs Tainted: G Hardware name: Qualcomm SA8775P Ride (DT) Call trace: dump_backtrace+0xac/0x130 show_stack+0x1c/0x30 dump_stack_lvl+0xac/0xe8 dump_stack+0x18/0x30 __might_resched+0x3bc/0x4fc rt_spin_lock+0x8c/0x1a4 __bpf_ringbuf_reserve+0xc4/0x254 bpf_ringbuf_reserve_dynptr+0x5c/0xdc bpf_prog_ac3d15160d62622a_test_read_write+0x104/0x238 trace_call_bpf+0x238/0x774 perf_call_bpf_enter.isra.0+0x104/0x194 perf_syscall_enter+0x2f8/0x510 trace_sys_enter+0x39c/0x564 syscall_trace_enter+0x220/0x3c0 do_el0_svc+0x138/0x1dc el0_svc+0x54/0x130 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Switch the spinlock to raw_spinlock_t to avoid this error. |
| CVE-2024-50137 | In the Linux kernel, the following vulnerability has been resolved: reset: starfive: jh71x0: Fix accessing the empty member on JH7110 SoC data->asserted will be NULL on JH7110 SoC since commit 82327b127d41 ("reset: starfive: Add StarFive JH7110 reset driver") was added. Add the judgment condition to avoid errors when calling reset_control_status on JH7110 SoC. |
| CVE-2024-50136 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Unregister notifier on eswitch init failure It otherwise remains registered and a subsequent attempt at eswitch enabling might trigger warnings of the sort: [ 682.589148] ------------[ cut here ]------------ [ 682.590204] notifier callback eswitch_vport_event [mlx5_core] already registered [ 682.590256] WARNING: CPU: 13 PID: 2660 at kernel/notifier.c:31 notifier_chain_register+0x3e/0x90 [...snipped] [ 682.610052] Call Trace: [ 682.610369] <TASK> [ 682.610663] ? __warn+0x7c/0x110 [ 682.611050] ? notifier_chain_register+0x3e/0x90 [ 682.611556] ? report_bug+0x148/0x170 [ 682.611977] ? handle_bug+0x36/0x70 [ 682.612384] ? exc_invalid_op+0x13/0x60 [ 682.612817] ? asm_exc_invalid_op+0x16/0x20 [ 682.613284] ? notifier_chain_register+0x3e/0x90 [ 682.613789] atomic_notifier_chain_register+0x25/0x40 [ 682.614322] mlx5_eswitch_enable_locked+0x1d4/0x3b0 [mlx5_core] [ 682.614965] mlx5_eswitch_enable+0xc9/0x100 [mlx5_core] [ 682.615551] mlx5_device_enable_sriov+0x25/0x340 [mlx5_core] [ 682.616170] mlx5_core_sriov_configure+0x50/0x170 [mlx5_core] [ 682.616789] sriov_numvfs_store+0xb0/0x1b0 [ 682.617248] kernfs_fop_write_iter+0x117/0x1a0 [ 682.617734] vfs_write+0x231/0x3f0 [ 682.618138] ksys_write+0x63/0xe0 [ 682.618536] do_syscall_64+0x4c/0x100 [ 682.618958] entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| CVE-2024-50135 | In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix race condition between reset and nvme_dev_disable() nvme_dev_disable() modifies the dev->online_queues field, therefore nvme_pci_update_nr_queues() should avoid racing against it, otherwise we could end up passing invalid values to blk_mq_update_nr_hw_queues(). WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347 pci_irq_get_affinity+0x187/0x210 Workqueue: nvme-reset-wq nvme_reset_work [nvme] RIP: 0010:pci_irq_get_affinity+0x187/0x210 Call Trace: <TASK> ? blk_mq_pci_map_queues+0x87/0x3c0 ? pci_irq_get_affinity+0x187/0x210 blk_mq_pci_map_queues+0x87/0x3c0 nvme_pci_map_queues+0x189/0x460 [nvme] blk_mq_update_nr_hw_queues+0x2a/0x40 nvme_reset_work+0x1be/0x2a0 [nvme] Fix the bug by locking the shutdown_lock mutex before using dev->online_queues. Give up if nvme_dev_disable() is running or if it has been executed already. |
| CVE-2024-50134 | In the Linux kernel, the following vulnerability has been resolved: drm/vboxvideo: Replace fake VLA at end of vbva_mouse_pointer_shape with real VLA Replace the fake VLA at end of the vbva_mouse_pointer_shape shape with a real VLA to fix a "memcpy: detected field-spanning write error" warning: [ 13.319813] memcpy: detected field-spanning write (size 16896) of single field "p->data" at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 (size 4) [ 13.319841] WARNING: CPU: 0 PID: 1105 at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 hgsmi_update_pointer_shape+0x192/0x1c0 [vboxvideo] [ 13.320038] Call Trace: [ 13.320173] hgsmi_update_pointer_shape [vboxvideo] [ 13.320184] vbox_cursor_atomic_update [vboxvideo] Note as mentioned in the added comment it seems the original length calculation for the allocated and send hgsmi buffer is 4 bytes too large. Changing this is not the goal of this patch, so this behavior is kept. |
| CVE-2024-50133 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: Don't crash in stack_top() for tasks without vDSO Not all tasks have a vDSO mapped, for example kthreads never do. If such a task ever ends up calling stack_top(), it will derefence the NULL vdso pointer and crash. This can for example happen when using kunit: [<9000000000203874>] stack_top+0x58/0xa8 [<90000000002956cc>] arch_pick_mmap_layout+0x164/0x220 [<90000000003c284c>] kunit_vm_mmap_init+0x108/0x12c [<90000000003c1fbc>] __kunit_add_resource+0x38/0x8c [<90000000003c2704>] kunit_vm_mmap+0x88/0xc8 [<9000000000410b14>] usercopy_test_init+0xbc/0x25c [<90000000003c1db4>] kunit_try_run_case+0x5c/0x184 [<90000000003c3d54>] kunit_generic_run_threadfn_adapter+0x24/0x48 [<900000000022e4bc>] kthread+0xc8/0xd4 [<9000000000200ce8>] ret_from_kernel_thread+0xc/0xa4 |
| CVE-2024-50132 | In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Fix MAX_TRACE_ARGS limit handling When creating a trace_probe we would set nr_args prior to truncating the arguments to MAX_TRACE_ARGS. However, we would only initialize arguments up to the limit. This caused invalid memory access when attempting to set up probes with more than 128 fetchargs. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:__set_print_fmt+0x134/0x330 Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return an error when there are too many arguments instead of silently truncating. |
| CVE-2024-50131 | In the Linux kernel, the following vulnerability has been resolved: tracing: Consider the NULL character when validating the event length strlen() returns a string length excluding the null byte. If the string length equals to the maximum buffer length, the buffer will have no space for the NULL terminating character. This commit checks this condition and returns failure for it. |
| CVE-2024-50130 | In the Linux kernel, the following vulnerability has been resolved: netfilter: bpf: must hold reference on net namespace BUG: KASAN: slab-use-after-free in __nf_unregister_net_hook+0x640/0x6b0 Read of size 8 at addr ffff8880106fe400 by task repro/72= bpf_nf_link_release+0xda/0x1e0 bpf_link_free+0x139/0x2d0 bpf_link_release+0x68/0x80 __fput+0x414/0xb60 Eric says: It seems that bpf was able to defer the __nf_unregister_net_hook() after exit()/close() time. Perhaps a netns reference is missing, because the netns has been dismantled/freed already. bpf_nf_link_attach() does : link->net = net; But I do not see a reference being taken on net. Add such a reference and release it after hook unreg. Note that I was unable to get syzbot reproducer to work, so I do not know if this resolves this splat. |
| CVE-2024-50129 | In the Linux kernel, the following vulnerability has been resolved: net: pse-pd: Fix out of bound for loop Adjust the loop limit to prevent out-of-bounds access when iterating over PI structures. The loop should not reach the index pcdev->nr_lines since we allocate exactly pcdev->nr_lines number of PI structures. This fix ensures proper bounds are maintained during iterations. |
| CVE-2024-50128 | In the Linux kernel, the following vulnerability has been resolved: net: wwan: fix global oob in wwan_rtnl_policy The variable wwan_rtnl_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. Exactly same bug cause as the oob fixed in commit b33fb5b801c6 ("net: qualcomm: rmnet: fix global oob in rmnet_policy"). ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:388 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603 Read of size 1 at addr ffffffff8b09cb60 by task syz.1.66276/323862 CPU: 0 PID: 323862 Comm: syz.1.66276 Not tainted 6.1.70 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x14f/0x750 mm/kasan/report.c:395 kasan_report+0x139/0x170 mm/kasan/report.c:495 validate_nla lib/nlattr.c:388 [inline] __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603 __nla_parse+0x3c/0x50 lib/nlattr.c:700 nla_parse_nested_deprecated include/net/netlink.h:1269 [inline] __rtnl_newlink net/core/rtnetlink.c:3514 [inline] rtnl_newlink+0x7bc/0x1fd0 net/core/rtnetlink.c:3623 rtnetlink_rcv_msg+0x794/0xef0 net/core/rtnetlink.c:6122 netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508 netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline] netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352 netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874 sock_sendmsg_nosec net/socket.c:716 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499 ___sys_sendmsg+0x21c/0x290 net/socket.c:2553 __sys_sendmsg net/socket.c:2582 [inline] __do_sys_sendmsg net/socket.c:2591 [inline] __se_sys_sendmsg+0x19e/0x270 net/socket.c:2589 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f67b19a24ad RSP: 002b:00007f67b17febb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f67b1b45f80 RCX: 00007f67b19a24ad RDX: 0000000000000000 RSI: 0000000020005e40 RDI: 0000000000000004 RBP: 00007f67b1a1e01d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd2513764f R14: 00007ffd251376e0 R15: 00007f67b17fed40 </TASK> The buggy address belongs to the variable: wwan_rtnl_policy+0x20/0x40 The buggy address belongs to the physical page: page:ffffea00002c2700 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xb09c flags: 0xfff00000001000(reserved|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000001000 ffffea00002c2708 ffffea00002c2708 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner info is not present (never set?) Memory state around the buggy address: ffffffff8b09ca00: 05 f9 f9 f9 05 f9 f9 f9 00 01 f9 f9 00 01 f9 f9 ffffffff8b09ca80: 00 00 00 05 f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 >ffffffff8b09cb00: 00 00 00 00 05 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 ^ ffffffff8b09cb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== According to the comment of `nla_parse_nested_deprecated`, use correct size `IFLA_WWAN_MAX` here to fix this issue. |
| CVE-2024-50127 | In the Linux kernel, the following vulnerability has been resolved: net: sched: fix use-after-free in taprio_change() In 'taprio_change()', 'admin' pointer may become dangling due to sched switch / removal caused by 'advance_sched()', and critical section protected by 'q->current_entry_lock' is too small to prevent from such a scenario (which causes use-after-free detected by KASAN). Fix this by prefer 'rcu_replace_pointer()' over 'rcu_assign_pointer()' to update 'admin' immediately before an attempt to schedule freeing. |
| CVE-2024-50126 | In the Linux kernel, the following vulnerability has been resolved: net: sched: use RCU read-side critical section in taprio_dump() Fix possible use-after-free in 'taprio_dump()' by adding RCU read-side critical section there. Never seen on x86 but found on a KASAN-enabled arm64 system when investigating https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa: [T15862] BUG: KASAN: slab-use-after-free in taprio_dump+0xa0c/0xbb0 [T15862] Read of size 4 at addr ffff0000d4bb88f8 by task repro/15862 [T15862] [T15862] CPU: 0 UID: 0 PID: 15862 Comm: repro Not tainted 6.11.0-rc1-00293-gdefaf1a2113a-dirty #2 [T15862] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-20240524-5.fc40 05/24/2024 [T15862] Call trace: [T15862] dump_backtrace+0x20c/0x220 [T15862] show_stack+0x2c/0x40 [T15862] dump_stack_lvl+0xf8/0x174 [T15862] print_report+0x170/0x4d8 [T15862] kasan_report+0xb8/0x1d4 [T15862] __asan_report_load4_noabort+0x20/0x2c [T15862] taprio_dump+0xa0c/0xbb0 [T15862] tc_fill_qdisc+0x540/0x1020 [T15862] qdisc_notify.isra.0+0x330/0x3a0 [T15862] tc_modify_qdisc+0x7b8/0x1838 [T15862] rtnetlink_rcv_msg+0x3c8/0xc20 [T15862] netlink_rcv_skb+0x1f8/0x3d4 [T15862] rtnetlink_rcv+0x28/0x40 [T15862] netlink_unicast+0x51c/0x790 [T15862] netlink_sendmsg+0x79c/0xc20 [T15862] __sock_sendmsg+0xe0/0x1a0 [T15862] ____sys_sendmsg+0x6c0/0x840 [T15862] ___sys_sendmsg+0x1ac/0x1f0 [T15862] __sys_sendmsg+0x110/0x1d0 [T15862] __arm64_sys_sendmsg+0x74/0xb0 [T15862] invoke_syscall+0x88/0x2e0 [T15862] el0_svc_common.constprop.0+0xe4/0x2a0 [T15862] do_el0_svc+0x44/0x60 [T15862] el0_svc+0x50/0x184 [T15862] el0t_64_sync_handler+0x120/0x12c [T15862] el0t_64_sync+0x190/0x194 [T15862] [T15862] Allocated by task 15857: [T15862] kasan_save_stack+0x3c/0x70 [T15862] kasan_save_track+0x20/0x3c [T15862] kasan_save_alloc_info+0x40/0x60 [T15862] __kasan_kmalloc+0xd4/0xe0 [T15862] __kmalloc_cache_noprof+0x194/0x334 [T15862] taprio_change+0x45c/0x2fe0 [T15862] tc_modify_qdisc+0x6a8/0x1838 [T15862] rtnetlink_rcv_msg+0x3c8/0xc20 [T15862] netlink_rcv_skb+0x1f8/0x3d4 [T15862] rtnetlink_rcv+0x28/0x40 [T15862] netlink_unicast+0x51c/0x790 [T15862] netlink_sendmsg+0x79c/0xc20 [T15862] __sock_sendmsg+0xe0/0x1a0 [T15862] ____sys_sendmsg+0x6c0/0x840 [T15862] ___sys_sendmsg+0x1ac/0x1f0 [T15862] __sys_sendmsg+0x110/0x1d0 [T15862] __arm64_sys_sendmsg+0x74/0xb0 [T15862] invoke_syscall+0x88/0x2e0 [T15862] el0_svc_common.constprop.0+0xe4/0x2a0 [T15862] do_el0_svc+0x44/0x60 [T15862] el0_svc+0x50/0x184 [T15862] el0t_64_sync_handler+0x120/0x12c [T15862] el0t_64_sync+0x190/0x194 [T15862] [T15862] Freed by task 6192: [T15862] kasan_save_stack+0x3c/0x70 [T15862] kasan_save_track+0x20/0x3c [T15862] kasan_save_free_info+0x4c/0x80 [T15862] poison_slab_object+0x110/0x160 [T15862] __kasan_slab_free+0x3c/0x74 [T15862] kfree+0x134/0x3c0 [T15862] taprio_free_sched_cb+0x18c/0x220 [T15862] rcu_core+0x920/0x1b7c [T15862] rcu_core_si+0x10/0x1c [T15862] handle_softirqs+0x2e8/0xd64 [T15862] __do_softirq+0x14/0x20 |
| CVE-2024-50125 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix UAF on sco_sock_timeout conn->sk maybe have been unlinked/freed while waiting for sco_conn_lock so this checks if the conn->sk is still valid by checking if it part of sco_sk_list. |
| CVE-2024-50124 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix UAF on iso_sock_timeout conn->sk maybe have been unlinked/freed while waiting for iso_conn_lock so this checks if the conn->sk is still valid by checking if it part of iso_sk_list. |
| CVE-2024-50123 | In the Linux kernel, the following vulnerability has been resolved: bpf: Add the missing BPF_LINK_TYPE invocation for sockmap There is an out-of-bounds read in bpf_link_show_fdinfo() for the sockmap link fd. Fix it by adding the missing BPF_LINK_TYPE invocation for sockmap link Also add comments for bpf_link_type to prevent missing updates in the future. |
| CVE-2024-50122 | In the Linux kernel, the following vulnerability has been resolved: PCI: Hold rescan lock while adding devices during host probe Since adding the PCI power control code, we may end up with a race between the pwrctl platform device rescanning the bus and host controller probe functions. The latter need to take the rescan lock when adding devices or we may end up in an undefined state having two incompletely added devices and hit the following crash when trying to remove the device over sysfs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Call trace: __pi_strlen+0x14/0x150 kernfs_find_ns+0x80/0x13c kernfs_remove_by_name_ns+0x54/0xf0 sysfs_remove_bin_file+0x24/0x34 pci_remove_resource_files+0x3c/0x84 pci_remove_sysfs_dev_files+0x28/0x38 pci_stop_bus_device+0x8c/0xd8 pci_stop_bus_device+0x40/0xd8 pci_stop_and_remove_bus_device_locked+0x28/0x48 remove_store+0x70/0xb0 dev_attr_store+0x20/0x38 sysfs_kf_write+0x58/0x78 kernfs_fop_write_iter+0xe8/0x184 vfs_write+0x2dc/0x308 ksys_write+0x7c/0xec |
| CVE-2024-50121 | In the Linux kernel, the following vulnerability has been resolved: nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net In the normal case, when we excute `echo 0 > /proc/fs/nfsd/threads`, the function `nfs4_state_destroy_net` in `nfs4_state_shutdown_net` will release all resources related to the hashed `nfs4_client`. If the `nfsd_client_shrinker` is running concurrently, the `expire_client` function will first unhash this client and then destroy it. This can lead to the following warning. Additionally, numerous use-after-free errors may occur as well. nfsd_client_shrinker echo 0 > /proc/fs/nfsd/threads expire_client nfsd_shutdown_net unhash_client ... nfs4_state_shutdown_net /* won't wait shrinker exit */ /* cancel_work(&nn->nfsd_shrinker_work) * nfsd_file for this /* won't destroy unhashed client1 */ * client1 still alive nfs4_state_destroy_net */ nfsd_file_cache_shutdown /* trigger warning */ kmem_cache_destroy(nfsd_file_slab) kmem_cache_destroy(nfsd_file_mark_slab) /* release nfsd_file and mark */ __destroy_client ==================================================================== BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on __kmem_cache_shutdown() -------------------------------------------------------------------- CPU: 4 UID: 0 PID: 764 Comm: sh Not tainted 6.12.0-rc3+ #1 dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xac/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e ==================================================================== BUG nfsd_file_mark (Tainted: G B W ): Objects remaining nfsd_file_mark on __kmem_cache_shutdown() -------------------------------------------------------------------- dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xc8/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e To resolve this issue, cancel `nfsd_shrinker_work` using synchronous mode in nfs4_state_shutdown_net. |
| CVE-2024-50120 | In the Linux kernel, the following vulnerability has been resolved: smb: client: Handle kstrdup failures for passwords In smb3_reconfigure(), after duplicating ctx->password and ctx->password2 with kstrdup(), we need to check for allocation failures. If ses->password allocation fails, return -ENOMEM. If ses->password2 allocation fails, free ses->password, set it to NULL, and return -ENOMEM. |
| CVE-2024-50119 | In the Linux kernel, the following vulnerability has been resolved: cifs: fix warning when destroy 'cifs_io_request_pool' There's a issue as follows: WARNING: CPU: 1 PID: 27826 at mm/slub.c:4698 free_large_kmalloc+0xac/0xe0 RIP: 0010:free_large_kmalloc+0xac/0xe0 Call Trace: <TASK> ? __warn+0xea/0x330 mempool_destroy+0x13f/0x1d0 init_cifs+0xa50/0xff0 [cifs] do_one_initcall+0xdc/0x550 do_init_module+0x22d/0x6b0 load_module+0x4e96/0x5ff0 init_module_from_file+0xcd/0x130 idempotent_init_module+0x330/0x620 __x64_sys_finit_module+0xb3/0x110 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Obviously, 'cifs_io_request_pool' is not created by mempool_create(). So just use mempool_exit() to revert 'cifs_io_request_pool'. |
| CVE-2024-50118 | In the Linux kernel, the following vulnerability has been resolved: btrfs: reject ro->rw reconfiguration if there are hard ro requirements [BUG] Syzbot reports the following crash: BTRFS info (device loop0 state MCS): disabling free space tree BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1) BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2) Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:backup_super_roots fs/btrfs/disk-io.c:1691 [inline] RIP: 0010:write_all_supers+0x97a/0x40f0 fs/btrfs/disk-io.c:4041 Call Trace: <TASK> btrfs_commit_transaction+0x1eae/0x3740 fs/btrfs/transaction.c:2530 btrfs_delete_free_space_tree+0x383/0x730 fs/btrfs/free-space-tree.c:1312 btrfs_start_pre_rw_mount+0xf28/0x1300 fs/btrfs/disk-io.c:3012 btrfs_remount_rw fs/btrfs/super.c:1309 [inline] btrfs_reconfigure+0xae6/0x2d40 fs/btrfs/super.c:1534 btrfs_reconfigure_for_mount fs/btrfs/super.c:2020 [inline] btrfs_get_tree_subvol fs/btrfs/super.c:2079 [inline] btrfs_get_tree+0x918/0x1920 fs/btrfs/super.c:2115 vfs_get_tree+0x90/0x2b0 fs/super.c:1800 do_new_mount+0x2be/0xb40 fs/namespace.c:3472 do_mount fs/namespace.c:3812 [inline] __do_sys_mount fs/namespace.c:4020 [inline] __se_sys_mount+0x2d6/0x3c0 fs/namespace.c:3997 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [CAUSE] To support mounting different subvolume with different RO/RW flags for the new mount APIs, btrfs introduced two workaround to support this feature: - Skip mount option/feature checks if we are mounting a different subvolume - Reconfigure the fs to RW if the initial mount is RO Combining these two, we can have the following sequence: - Mount the fs ro,rescue=all,clear_cache,space_cache=v1 rescue=all will mark the fs as hard read-only, so no v2 cache clearing will happen. - Mount a subvolume rw of the same fs. We go into btrfs_get_tree_subvol(), but fc_mount() returns EBUSY because our new fc is RW, different from the original fs. Now we enter btrfs_reconfigure_for_mount(), which switches the RO flag first so that we can grab the existing fs_info. Then we reconfigure the fs to RW. - During reconfiguration, option/features check is skipped This means we will restart the v2 cache clearing, and convert back to v1 cache. This will trigger fs writes, and since the original fs has "rescue=all" option, it skips the csum tree read. And eventually causing NULL pointer dereference in super block writeback. [FIX] For reconfiguration caused by different subvolume RO/RW flags, ensure we always run btrfs_check_options() to ensure we have proper hard RO requirements met. In fact the function btrfs_check_options() doesn't really do many complex checks, but hard RO requirement and some feature dependency checks, thus there is no special reason not to do the check for mount reconfiguration. |
| CVE-2024-50117 | In the Linux kernel, the following vulnerability has been resolved: drm/amd: Guard against bad data for ATIF ACPI method If a BIOS provides bad data in response to an ATIF method call this causes a NULL pointer dereference in the caller. ``` ? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1)) ? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434) ? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2)) ? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1)) ? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642) ? exc_page_fault (arch/x86/mm/fault.c:1542) ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) ? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu ? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu ``` It has been encountered on at least one system, so guard for it. (cherry picked from commit c9b7c809b89f24e9372a4e7f02d64c950b07fdee) |
| CVE-2024-50116 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug due to missing clearing of buffer delay flag Syzbot reported that after nilfs2 reads a corrupted file system image and degrades to read-only, the BUG_ON check for the buffer delay flag in submit_bh_wbc() may fail, causing a kernel bug. This is because the buffer delay flag is not cleared when clearing the buffer state flags to discard a page/folio or a buffer head. So, fix this. This became necessary when the use of nilfs2's own page clear routine was expanded. This state inconsistency does not occur if the buffer is written normally by log writing. |
| CVE-2024-50115 | In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory Ignore nCR3[4:0] when loading PDPTEs from memory for nested SVM, as bits 4:0 of CR3 are ignored when PAE paging is used, and thus VMRUN doesn't enforce 32-byte alignment of nCR3. In the absolute worst case scenario, failure to ignore bits 4:0 can result in an out-of-bounds read, e.g. if the target page is at the end of a memslot, and the VMM isn't using guard pages. Per the APM: The CR3 register points to the base address of the page-directory-pointer table. The page-directory-pointer table is aligned on a 32-byte boundary, with the low 5 address bits 4:0 assumed to be 0. And the SDM's much more explicit: 4:0 Ignored Note, KVM gets this right when loading PDPTRs, it's only the nSVM flow that is broken. |
| CVE-2024-50114 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Unregister redistributor for failed vCPU creation Alex reports that syzkaller has managed to trigger a use-after-free when tearing down a VM: BUG: KASAN: slab-use-after-free in kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769 Read of size 8 at addr ffffff801c6890d0 by task syz.3.2219/10758 CPU: 3 UID: 0 PID: 10758 Comm: syz.3.2219 Not tainted 6.11.0-rc6-dirty #64 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x17c/0x1a8 arch/arm64/kernel/stacktrace.c:317 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:324 __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x94/0xc0 lib/dump_stack.c:119 print_report+0x144/0x7a4 mm/kasan/report.c:377 kasan_report+0xcc/0x128 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769 kvm_vm_release+0x4c/0x60 virt/kvm/kvm_main.c:1409 __fput+0x198/0x71c fs/file_table.c:422 ____fput+0x20/0x30 fs/file_table.c:450 task_work_run+0x1cc/0x23c kernel/task_work.c:228 do_notify_resume+0x144/0x1a0 include/linux/resume_user_mode.h:50 el0_svc+0x64/0x68 arch/arm64/kernel/entry-common.c:169 el0t_64_sync_handler+0x90/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Upon closer inspection, it appears that we do not properly tear down the MMIO registration for a vCPU that fails creation late in the game, e.g. a vCPU w/ the same ID already exists in the VM. It is important to consider the context of commit that introduced this bug by moving the unregistration out of __kvm_vgic_vcpu_destroy(). That change correctly sought to avoid an srcu v. config_lock inversion by breaking up the vCPU teardown into two parts, one guarded by the config_lock. Fix the use-after-free while avoiding lock inversion by adding a special-cased unregistration to __kvm_vgic_vcpu_destroy(). This is safe because failed vCPUs are torn down outside of the config_lock. |
| CVE-2024-50113 | In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix invalid port index for parent device In a commit 24b7f8e5cd65 ("firewire: core: use helper functions for self ID sequence"), the enumeration over self ID sequence was refactored with some helper functions with KUnit tests. These helper functions are guaranteed to work expectedly by the KUnit tests, however their application includes a mistake to assign invalid value to the index of port connected to parent device. This bug affects the case that any extra node devices which has three or more ports are connected to 1394 OHCI controller. In the case, the path to update the tree cache could hits WARN_ON(), and gets general protection fault due to the access to invalid address computed by the invalid value. This commit fixes the bug to assign correct port index. |
| CVE-2024-50112 | In the Linux kernel, the following vulnerability has been resolved: x86/lam: Disable ADDRESS_MASKING in most cases Linear Address Masking (LAM) has a weakness related to transient execution as described in the SLAM paper[1]. Unless Linear Address Space Separation (LASS) is enabled this weakness may be exploitable. Until kernel adds support for LASS[2], only allow LAM for COMPILE_TEST, or when speculation mitigations have been disabled at compile time, otherwise keep LAM disabled. There are no processors in market that support LAM yet, so currently nobody is affected by this issue. [1] SLAM: https://download.vusec.net/papers/slam_sp24.pdf [2] LASS: https://lore.kernel.org/lkml/[email protected]/ [ dhansen: update SPECULATION_MITIGATIONS -> CPU_MITIGATIONS ] |
| CVE-2024-50111 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: Enable IRQ if do_ale() triggered in irq-enabled context Unaligned access exception can be triggered in irq-enabled context such as user mode, in this case do_ale() may call get_user() which may cause sleep. Then we will get: BUG: sleeping function called from invalid context at arch/loongarch/kernel/access-helper.h:7 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 129, name: modprobe preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 UID: 0 PID: 129 Comm: modprobe Tainted: G W 6.12.0-rc1+ #1723 Tainted: [W]=WARN Stack : 9000000105e0bd48 0000000000000000 9000000003803944 9000000105e08000 9000000105e0bc70 9000000105e0bc78 0000000000000000 0000000000000000 9000000105e0bc78 0000000000000001 9000000185e0ba07 9000000105e0b890 ffffffffffffffff 9000000105e0bc78 73924b81763be05b 9000000100194500 000000000000020c 000000000000000a 0000000000000000 0000000000000003 00000000000023f0 00000000000e1401 00000000072f8000 0000007ffbb0e260 0000000000000000 0000000000000000 9000000005437650 90000000055d5000 0000000000000000 0000000000000003 0000007ffbb0e1f0 0000000000000000 0000005567b00490 0000000000000000 9000000003803964 0000007ffbb0dfec 00000000000000b0 0000000000000007 0000000000000003 0000000000071c1d ... Call Trace: [<9000000003803964>] show_stack+0x64/0x1a0 [<9000000004c57464>] dump_stack_lvl+0x74/0xb0 [<9000000003861ab4>] __might_resched+0x154/0x1a0 [<900000000380c96c>] emulate_load_store_insn+0x6c/0xf60 [<9000000004c58118>] do_ale+0x78/0x180 [<9000000003801bc8>] handle_ale+0x128/0x1e0 So enable IRQ if unaligned access exception is triggered in irq-enabled context to fix it. |
| CVE-2024-50110 | In the Linux kernel, the following vulnerability has been resolved: xfrm: fix one more kernel-infoleak in algo dumping During fuzz testing, the following issue was discovered: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x598/0x2a30 _copy_to_iter+0x598/0x2a30 __skb_datagram_iter+0x168/0x1060 skb_copy_datagram_iter+0x5b/0x220 netlink_recvmsg+0x362/0x1700 sock_recvmsg+0x2dc/0x390 __sys_recvfrom+0x381/0x6d0 __x64_sys_recvfrom+0x130/0x200 x64_sys_call+0x32c8/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Uninit was stored to memory at: copy_to_user_state_extra+0xcc1/0x1e00 dump_one_state+0x28c/0x5f0 xfrm_state_walk+0x548/0x11e0 xfrm_dump_sa+0x1e0/0x840 netlink_dump+0x943/0x1c40 __netlink_dump_start+0x746/0xdb0 xfrm_user_rcv_msg+0x429/0xc00 netlink_rcv_skb+0x613/0x780 xfrm_netlink_rcv+0x77/0xc0 netlink_unicast+0xe90/0x1280 netlink_sendmsg+0x126d/0x1490 __sock_sendmsg+0x332/0x3d0 ____sys_sendmsg+0x863/0xc30 ___sys_sendmsg+0x285/0x3e0 __x64_sys_sendmsg+0x2d6/0x560 x64_sys_call+0x1316/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Uninit was created at: __kmalloc+0x571/0xd30 attach_auth+0x106/0x3e0 xfrm_add_sa+0x2aa0/0x4230 xfrm_user_rcv_msg+0x832/0xc00 netlink_rcv_skb+0x613/0x780 xfrm_netlink_rcv+0x77/0xc0 netlink_unicast+0xe90/0x1280 netlink_sendmsg+0x126d/0x1490 __sock_sendmsg+0x332/0x3d0 ____sys_sendmsg+0x863/0xc30 ___sys_sendmsg+0x285/0x3e0 __x64_sys_sendmsg+0x2d6/0x560 x64_sys_call+0x1316/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Bytes 328-379 of 732 are uninitialized Memory access of size 732 starts at ffff88800e18e000 Data copied to user address 00007ff30f48aff0 CPU: 2 PID: 18167 Comm: syz-executor.0 Not tainted 6.8.11 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Fixes copying of xfrm algorithms where some random data of the structure fields can end up in userspace. Padding in structures may be filled with random (possibly sensitve) data and should never be given directly to user-space. A similar issue was resolved in the commit 8222d5910dae ("xfrm: Zero padding when dumping algos and encap") Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| CVE-2024-50109 | In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix null ptr dereference in raid10_size() In raid10_run() if raid10_set_queue_limits() succeed, the return value is set to zero, and if following procedures failed raid10_run() will return zero while mddev->private is still NULL, causing null ptr dereference in raid10_size(). Fix the problem by only overwrite the return value if raid10_set_queue_limits() failed. |
| CVE-2024-50108 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too Stuart Hayhurst has found that both at bootup and fullscreen VA-API video is leading to black screens for around 1 second and kernel WARNING [1] traces when calling dmub_psr_enable() with Parade 08-01 TCON. These symptoms all go away with PSR-SU disabled for this TCON, so disable it for now while DMUB traces [2] from the failure can be analyzed and the failure state properly root caused. (cherry picked from commit afb634a6823d8d9db23c5fb04f79c5549349628b) |
| CVE-2024-50107 | In the Linux kernel, the following vulnerability has been resolved: platform/x86/intel/pmc: Fix pmc_core_iounmap to call iounmap for valid addresses Commit 50c6dbdfd16e ("x86/ioremap: Improve iounmap() address range checks") introduces a WARN when adrress ranges of iounmap are invalid. On Thinkpad P1 Gen 7 (Meteor Lake-P) this caused the following warning to appear: WARNING: CPU: 7 PID: 713 at arch/x86/mm/ioremap.c:461 iounmap+0x58/0x1f0 Modules linked in: rfkill(+) snd_timer(+) fjes(+) snd soundcore intel_pmc_core(+) int3403_thermal(+) int340x_thermal_zone intel_vsec pmt_telemetry acpi_pad pmt_class acpi_tad int3400_thermal acpi_thermal_rel joydev loop nfnetlink zram xe drm_suballoc_helper nouveau i915 mxm_wmi drm_ttm_helper gpu_sched drm_gpuvm drm_exec drm_buddy i2c_algo_bit crct10dif_pclmul crc32_pclmul ttm crc32c_intel polyval_clmulni rtsx_pci_sdmmc ucsi_acpi polyval_generic mmc_core hid_multitouch drm_display_helper ghash_clmulni_intel typec_ucsi nvme sha512_ssse3 video sha256_ssse3 nvme_core intel_vpu sha1_ssse3 rtsx_pci cec typec nvme_auth i2c_hid_acpi i2c_hid wmi pinctrl_meteorlake serio_raw ip6_tables ip_tables fuse CPU: 7 UID: 0 PID: 713 Comm: (udev-worker) Not tainted 6.12.0-rc2iounmap+ #42 Hardware name: LENOVO 21KWCTO1WW/21KWCTO1WW, BIOS N48ET19W (1.06 ) 07/18/2024 RIP: 0010:iounmap+0x58/0x1f0 Code: 85 6a 01 00 00 48 8b 05 e6 e2 28 04 48 39 c5 72 19 eb 26 cc cc cc 48 ba 00 00 00 00 00 00 32 00 48 8d 44 02 ff 48 39 c5 72 23 <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 cc cc cc cc 48 ba 00 00 00 00 00 RSP: 0018:ffff888131eff038 EFLAGS: 00010207 RAX: ffffc90000000000 RBX: 0000000000000000 RCX: ffff888e33b80000 RDX: dffffc0000000000 RSI: ffff888e33bc29c0 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff8881598a8000 R09: ffff888e2ccedc10 R10: 0000000000000003 R11: ffffffffb3367634 R12: 00000000fe000000 R13: ffff888101d0da28 R14: ffffffffc2e437e0 R15: ffff888110b03b28 FS: 00007f3c1d4b3980(0000) GS:ffff888e33b80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005651cfc93578 CR3: 0000000124e4c002 CR4: 0000000000f70ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn.cold+0xb6/0x176 ? iounmap+0x58/0x1f0 ? report_bug+0x1f4/0x2b0 ? handle_bug+0x58/0x90 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? iounmap+0x58/0x1f0 pmc_core_ssram_get_pmc+0x477/0x6c0 [intel_pmc_core] ? __pfx_pmc_core_ssram_get_pmc+0x10/0x10 [intel_pmc_core] ? __pfx_do_pci_enable_device+0x10/0x10 ? pci_wait_for_pending+0x60/0x110 ? pci_enable_device_flags+0x1e3/0x2e0 ? __pfx_mtl_core_init+0x10/0x10 [intel_pmc_core] pmc_core_ssram_init+0x7f/0x110 [intel_pmc_core] mtl_core_init+0xda/0x130 [intel_pmc_core] ? __mutex_init+0xb9/0x130 pmc_core_probe+0x27e/0x10b0 [intel_pmc_core] ? _raw_spin_lock_irqsave+0x96/0xf0 ? __pfx_pmc_core_probe+0x10/0x10 [intel_pmc_core] ? __pfx_mutex_unlock+0x10/0x10 ? __pfx_mutex_lock+0x10/0x10 ? device_pm_check_callbacks+0x82/0x370 ? acpi_dev_pm_attach+0x234/0x2b0 platform_probe+0x9f/0x150 really_probe+0x1e0/0x8a0 __driver_probe_device+0x18c/0x370 ? __pfx___driver_attach+0x10/0x10 driver_probe_device+0x4a/0x120 __driver_attach+0x190/0x4a0 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x103/0x180 ? __pfx_bus_for_each_dev+0x10/0x10 ? klist_add_tail+0x136/0x270 bus_add_driver+0x2fc/0x540 driver_register+0x1a5/0x360 ? __pfx_pmc_core_driver_init+0x10/0x10 [intel_pmc_core] do_one_initcall+0xa4/0x380 ? __pfx_do_one_initcall+0x10/0x10 ? kasan_unpoison+0x44/0x70 do_init_module+0x296/0x800 load_module+0x5090/0x6ce0 ? __pfx_load_module+0x10/0x10 ? ima_post_read_file+0x193/0x200 ? __pfx_ima_post_read_file+0x10/0x10 ? rw_verify_area+0x152/0x4c0 ? kernel_read_file+0x257/0x750 ? __pfx_kernel_read_file+0x10/0x10 ? __pfx_filemap_get_read_batch+0x10/0x10 ? init_module_from_file+0xd1/0x130 init_module_from_file+0xd1/0x130 ? __pfx_init_module_from_file+0x10/0 ---truncated--- |
| CVE-2024-50106 | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix race between laundromat and free_stateid There is a race between laundromat handling of revoked delegations and a client sending free_stateid operation. Laundromat thread finds that delegation has expired and needs to be revoked so it marks the delegation stid revoked and it puts it on a reaper list but then it unlock the state lock and the actual delegation revocation happens without the lock. Once the stid is marked revoked a racing free_stateid processing thread does the following (1) it calls list_del_init() which removes it from the reaper list and (2) frees the delegation stid structure. The laundromat thread ends up not calling the revoke_delegation() function for this particular delegation but that means it will no release the lock lease that exists on the file. Now, a new open for this file comes in and ends up finding that lease list isn't empty and calls nfsd_breaker_owns_lease() which ends up trying to derefence a freed delegation stateid. Leading to the followint use-after-free KASAN warning: kernel: ================================================================== kernel: BUG: KASAN: slab-use-after-free in nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: Read of size 8 at addr ffff0000e73cd0c8 by task nfsd/6205 kernel: kernel: CPU: 2 UID: 0 PID: 6205 Comm: nfsd Kdump: loaded Not tainted 6.11.0-rc7+ #9 kernel: Hardware name: Apple Inc. Apple Virtualization Generic Platform, BIOS 2069.0.0.0.0 08/03/2024 kernel: Call trace: kernel: dump_backtrace+0x98/0x120 kernel: show_stack+0x1c/0x30 kernel: dump_stack_lvl+0x80/0xe8 kernel: print_address_description.constprop.0+0x84/0x390 kernel: print_report+0xa4/0x268 kernel: kasan_report+0xb4/0xf8 kernel: __asan_report_load8_noabort+0x1c/0x28 kernel: nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: nfsd_file_do_acquire+0xb3c/0x11d0 [nfsd] kernel: nfsd_file_acquire_opened+0x84/0x110 [nfsd] kernel: nfs4_get_vfs_file+0x634/0x958 [nfsd] kernel: nfsd4_process_open2+0xa40/0x1a40 [nfsd] kernel: nfsd4_open+0xa08/0xe80 [nfsd] kernel: nfsd4_proc_compound+0xb8c/0x2130 [nfsd] kernel: nfsd_dispatch+0x22c/0x718 [nfsd] kernel: svc_process_common+0x8e8/0x1960 [sunrpc] kernel: svc_process+0x3d4/0x7e0 [sunrpc] kernel: svc_handle_xprt+0x828/0xe10 [sunrpc] kernel: svc_recv+0x2cc/0x6a8 [sunrpc] kernel: nfsd+0x270/0x400 [nfsd] kernel: kthread+0x288/0x310 kernel: ret_from_fork+0x10/0x20 This patch proposes a fixed that's based on adding 2 new additional stid's sc_status values that help coordinate between the laundromat and other operations (nfsd4_free_stateid() and nfsd4_delegreturn()). First to make sure, that once the stid is marked revoked, it is not removed by the nfsd4_free_stateid(), the laundromat take a reference on the stateid. Then, coordinating whether the stid has been put on the cl_revoked list or we are processing FREE_STATEID and need to make sure to remove it from the list, each check that state and act accordingly. If laundromat has added to the cl_revoke list before the arrival of FREE_STATEID, then nfsd4_free_stateid() knows to remove it from the list. If nfsd4_free_stateid() finds that operations arrived before laundromat has placed it on cl_revoke list, it marks the state freed and then laundromat will no longer add it to the list. Also, for nfsd4_delegreturn() when looking for the specified stid, we need to access stid that are marked removed or freeable, it means the laundromat has started processing it but hasn't finished and this delegreturn needs to return nfserr_deleg_revoked and not nfserr_bad_stateid. The latter will not trigger a FREE_STATEID and the lack of it will leave this stid on the cl_revoked list indefinitely. |
| CVE-2024-50105 | In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc Commit 15c7fab0e047 ("ASoC: qcom: Move Soundwire runtime stream alloc to soundcards") moved the allocation of Soundwire stream runtime from the Qualcomm Soundwire driver to each individual machine sound card driver, except that it forgot to update SC7280 card. Just like for other Qualcomm sound cards using Soundwire, the card driver should allocate and release the runtime. Otherwise sound playback will result in a NULL pointer dereference or other effect of uninitialized memory accesses (which was confirmed on SDM845 having similar issue). |
| CVE-2024-50104 | In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: sdm845: add missing soundwire runtime stream alloc During the migration of Soundwire runtime stream allocation from the Qualcomm Soundwire controller to SoC's soundcard drivers the sdm845 soundcard was forgotten. At this point any playback attempt or audio daemon startup, for instance on sdm845-db845c (Qualcomm RB3 board), will result in stream pointer NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101ecf000 [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: ... CPU: 5 UID: 0 PID: 1198 Comm: aplay Not tainted 6.12.0-rc2-qcomlt-arm64-00059-g9d78f315a362-dirty #18 Hardware name: Thundercomm Dragonboard 845c (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] lr : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] sp : ffff80008a2035c0 x29: ffff80008a2035c0 x28: ffff80008a203978 x27: 0000000000000000 x26: 00000000000000c0 x25: 0000000000000000 x24: ffff1676025f4800 x23: ffff167600ff1cb8 x22: ffff167600ff1c98 x21: 0000000000000003 x20: ffff167607316000 x19: ffff167604e64e80 x18: 0000000000000000 x17: 0000000000000000 x16: ffffcec265074160 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff167600ff1cec x5 : ffffcec22cfa2010 x4 : 0000000000000000 x3 : 0000000000000003 x2 : ffff167613f836c0 x1 : 0000000000000000 x0 : ffff16761feb60b8 Call trace: sdw_stream_add_slave+0x44/0x380 [soundwire_bus] wsa881x_hw_params+0x68/0x80 [snd_soc_wsa881x] snd_soc_dai_hw_params+0x3c/0xa4 __soc_pcm_hw_params+0x230/0x660 dpcm_be_dai_hw_params+0x1d0/0x3f8 dpcm_fe_dai_hw_params+0x98/0x268 snd_pcm_hw_params+0x124/0x460 snd_pcm_common_ioctl+0x998/0x16e8 snd_pcm_ioctl+0x34/0x58 __arm64_sys_ioctl+0xac/0xf8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xe0 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: aa0403fb f9418400 9100e000 9400102f (f8420f22) ---[ end trace 0000000000000000 ]--- 0000000000006108 <sdw_stream_add_slave>: 6108: d503233f paciasp 610c: a9b97bfd stp x29, x30, [sp, #-112]! 6110: 910003fd mov x29, sp 6114: a90153f3 stp x19, x20, [sp, #16] 6118: a9025bf5 stp x21, x22, [sp, #32] 611c: aa0103f6 mov x22, x1 6120: 2a0303f5 mov w21, w3 6124: a90363f7 stp x23, x24, [sp, #48] 6128: aa0003f8 mov x24, x0 612c: aa0203f7 mov x23, x2 6130: a9046bf9 stp x25, x26, [sp, #64] 6134: aa0403f9 mov x25, x4 <-- x4 copied to x25 6138: a90573fb stp x27, x28, [sp, #80] 613c: aa0403fb mov x27, x4 6140: f9418400 ldr x0, [x0, #776] 6144: 9100e000 add x0, x0, #0x38 6148: 94000000 bl 0 <mutex_lock> 614c: f8420f22 ldr x2, [x25, #32]! <-- offset 0x44 ^^^ This is 0x6108 + offset 0x44 from the beginning of sdw_stream_add_slave() where data abort happens. wsa881x_hw_params() is called with stream = NULL and passes it further in register x4 (5th argu ---truncated--- |
| CVE-2024-50103 | In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe() A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could possibly return NULL pointer. NULL Pointer Dereference may be triggerred without addtional check. Add a NULL check for the returned pointer. |
| CVE-2024-50102 | In the Linux kernel, the following vulnerability has been resolved: x86: fix user address masking non-canonical speculation issue It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical accesses in kernel space. And so using just the high bit to decide whether an access is in user space or kernel space ends up with the good old "leak speculative data" if you have the right gadget using the result: CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“ Now, the kernel surrounds the access with a STAC/CLAC pair, and those instructions end up serializing execution on older Zen architectures, which closes the speculation window. But that was true only up until Zen 5, which renames the AC bit [1]. That improves performance of STAC/CLAC a lot, but also means that the speculation window is now open. Note that this affects not just the new address masking, but also the regular valid_user_address() check used by access_ok(), and the asm version of the sign bit check in the get_user() helpers. It does not affect put_user() or clear_user() variants, since there's no speculative result to be used in a gadget for those operations. |
| CVE-2024-50101 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix incorrect pci_for_each_dma_alias() for non-PCI devices Previously, the domain_context_clear() function incorrectly called pci_for_each_dma_alias() to set up context entries for non-PCI devices. This could lead to kernel hangs or other unexpected behavior. Add a check to only call pci_for_each_dma_alias() for PCI devices. For non-PCI devices, domain_context_clear_one() is called directly. |
| CVE-2024-50100 | In the Linux kernel, the following vulnerability has been resolved: USB: gadget: dummy-hcd: Fix "task hung" problem The syzbot fuzzer has been encountering "task hung" problems ever since the dummy-hcd driver was changed to use hrtimers instead of regular timers. It turns out that the problems are caused by a subtle difference between the timer_pending() and hrtimer_active() APIs. The changeover blindly replaced the first by the second. However, timer_pending() returns True when the timer is queued but not when its callback is running, whereas hrtimer_active() returns True when the hrtimer is queued _or_ its callback is running. This difference occasionally caused dummy_urb_enqueue() to think that the callback routine had not yet started when in fact it was almost finished. As a result the hrtimer was not restarted, which made it impossible for the driver to dequeue later the URB that was just enqueued. This caused usb_kill_urb() to hang, and things got worse from there. Since hrtimers have no API for telling when they are queued and the callback isn't running, the driver must keep track of this for itself. That's what this patch does, adding a new "timer_pending" flag and setting or clearing it at the appropriate times. |
| CVE-2024-50099 | In the Linux kernel, the following vulnerability has been resolved: arm64: probes: Remove broken LDR (literal) uprobe support The simulate_ldr_literal() and simulate_ldrsw_literal() functions are unsafe to use for uprobes. Both functions were originally written for use with kprobes, and access memory with plain C accesses. When uprobes was added, these were reused unmodified even though they cannot safely access user memory. There are three key problems: 1) The plain C accesses do not have corresponding extable entries, and thus if they encounter a fault the kernel will treat these as unintentional accesses to user memory, resulting in a BUG() which will kill the kernel thread, and likely lead to further issues (e.g. lockup or panic()). 2) The plain C accesses are subject to HW PAN and SW PAN, and so when either is in use, any attempt to simulate an access to user memory will fault. Thus neither simulate_ldr_literal() nor simulate_ldrsw_literal() can do anything useful when simulating a user instruction on any system with HW PAN or SW PAN. 3) The plain C accesses are privileged, as they run in kernel context, and in practice can access a small range of kernel virtual addresses. The instructions they simulate have a range of +/-1MiB, and since the simulated instructions must itself be a user instructions in the TTBR0 address range, these can address the final 1MiB of the TTBR1 acddress range by wrapping downwards from an address in the first 1MiB of the TTBR0 address range. In contemporary kernels the last 8MiB of TTBR1 address range is reserved, and accesses to this will always fault, meaning this is no worse than (1). Historically, it was theoretically possible for the linear map or vmemmap to spill into the final 8MiB of the TTBR1 address range, but in practice this is extremely unlikely to occur as this would require either: * Having enough physical memory to fill the entire linear map all the way to the final 1MiB of the TTBR1 address range. * Getting unlucky with KASLR randomization of the linear map such that the populated region happens to overlap with the last 1MiB of the TTBR address range. ... and in either case if we were to spill into the final page there would be larger problems as the final page would alias with error pointers. Practically speaking, (1) and (2) are the big issues. Given there have been no reports of problems since the broken code was introduced, it appears that no-one is relying on probing these instructions with uprobes. Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW (literal), limiting the use of simulate_ldr_literal() and simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR (literal) and LDRSW (literal) will be rejected as arm_probe_decode_insn() will return INSN_REJECTED. In future we can consider introducing working uprobes support for these instructions, but this will require more significant work. |
| CVE-2024-50098 | In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down There is a history of deadlock if reboot is performed at the beginning of booting. SDEV_QUIESCE was set for all LU's scsi_devices by UFS shutdown, and at that time the audio driver was waiting on blk_mq_submit_bio() holding a mutex_lock while reading the fw binary. After that, a deadlock issue occurred while audio driver shutdown was waiting for mutex_unlock of blk_mq_submit_bio(). To solve this, set SDEV_OFFLINE for all LUs except WLUN, so that any I/O that comes down after a UFS shutdown will return an error. [ 31.907781]I[0: swapper/0: 0] 1 130705007 1651079834 11289729804 0 D( 2) 3 ffffff882e208000 * init [device_shutdown] [ 31.907793]I[0: swapper/0: 0] Mutex: 0xffffff8849a2b8b0: owner[0xffffff882e28cb00 kworker/6:0 :49] [ 31.907806]I[0: swapper/0: 0] Call trace: [ 31.907810]I[0: swapper/0: 0] __switch_to+0x174/0x338 [ 31.907819]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc [ 31.907826]I[0: swapper/0: 0] schedule+0x7c/0xe8 [ 31.907834]I[0: swapper/0: 0] schedule_preempt_disabled+0x24/0x40 [ 31.907842]I[0: swapper/0: 0] __mutex_lock+0x408/0xdac [ 31.907849]I[0: swapper/0: 0] __mutex_lock_slowpath+0x14/0x24 [ 31.907858]I[0: swapper/0: 0] mutex_lock+0x40/0xec [ 31.907866]I[0: swapper/0: 0] device_shutdown+0x108/0x280 [ 31.907875]I[0: swapper/0: 0] kernel_restart+0x4c/0x11c [ 31.907883]I[0: swapper/0: 0] __arm64_sys_reboot+0x15c/0x280 [ 31.907890]I[0: swapper/0: 0] invoke_syscall+0x70/0x158 [ 31.907899]I[0: swapper/0: 0] el0_svc_common+0xb4/0xf4 [ 31.907909]I[0: swapper/0: 0] do_el0_svc+0x2c/0xb0 [ 31.907918]I[0: swapper/0: 0] el0_svc+0x34/0xe0 [ 31.907928]I[0: swapper/0: 0] el0t_64_sync_handler+0x68/0xb4 [ 31.907937]I[0: swapper/0: 0] el0t_64_sync+0x1a0/0x1a4 [ 31.908774]I[0: swapper/0: 0] 49 0 11960702 11236868007 0 D( 2) 6 ffffff882e28cb00 * kworker/6:0 [__bio_queue_enter] [ 31.908783]I[0: swapper/0: 0] Call trace: [ 31.908788]I[0: swapper/0: 0] __switch_to+0x174/0x338 [ 31.908796]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc [ 31.908803]I[0: swapper/0: 0] schedule+0x7c/0xe8 [ 31.908811]I[0: swapper/0: 0] __bio_queue_enter+0xb8/0x178 [ 31.908818]I[0: swapper/0: 0] blk_mq_submit_bio+0x194/0x67c [ 31.908827]I[0: swapper/0: 0] __submit_bio+0xb8/0x19c |
| CVE-2024-50097 | In the Linux kernel, the following vulnerability has been resolved: net: fec: don't save PTP state if PTP is unsupported Some platforms (such as i.MX25 and i.MX27) do not support PTP, so on these platforms fec_ptp_init() is not called and the related members in fep are not initialized. However, fec_ptp_save_state() is called unconditionally, which causes the kernel to panic. Therefore, add a condition so that fec_ptp_save_state() is not called if PTP is not supported. |
| CVE-2024-50096 | In the Linux kernel, the following vulnerability has been resolved: nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error The `nouveau_dmem_copy_one` function ensures that the copy push command is sent to the device firmware but does not track whether it was executed successfully. In the case of a copy error (e.g., firmware or hardware failure), the copy push command will be sent via the firmware channel, and `nouveau_dmem_copy_one` will likely report success, leading to the `migrate_to_ram` function returning a dirty HIGH_USER page to the user. This can result in a security vulnerability, as a HIGH_USER page that may contain sensitive or corrupted data could be returned to the user. To prevent this vulnerability, we allocate a zero page. Thus, in case of an error, a non-dirty (zero) page will be returned to the user. |
| CVE-2024-50095 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Improve handling of timed out WRs of mad agent Current timeout handler of mad agent acquires/releases mad_agent_priv lock for every timed out WRs. This causes heavy locking contention when higher no. of WRs are to be handled inside timeout handler. This leads to softlockup with below trace in some use cases where rdma-cm path is used to establish connection between peer nodes Trace: ----- BUG: soft lockup - CPU#4 stuck for 26s! [kworker/u128:3:19767] CPU: 4 PID: 19767 Comm: kworker/u128:3 Kdump: loaded Tainted: G OE ------- --- 5.14.0-427.13.1.el9_4.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.4.8 11/26/2019 Workqueue: ib_mad1 timeout_sends [ib_core] RIP: 0010:__do_softirq+0x78/0x2ac RSP: 0018:ffffb253449e4f98 EFLAGS: 00000246 RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 000000000000001f RDX: 000000000000001d RSI: 000000003d1879ab RDI: fff363b66fd3a86b RBP: ffffb253604cbcd8 R08: 0000009065635f3b R09: 0000000000000000 R10: 0000000000000040 R11: ffffb253449e4ff8 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff8caa1fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd9ec9db900 CR3: 0000000891934006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? __irq_exit_rcu+0xa1/0xc0 ? watchdog_timer_fn+0x1b2/0x210 ? __pfx_watchdog_timer_fn+0x10/0x10 ? __hrtimer_run_queues+0x127/0x2c0 ? hrtimer_interrupt+0xfc/0x210 ? __sysvec_apic_timer_interrupt+0x5c/0x110 ? sysvec_apic_timer_interrupt+0x37/0x90 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __do_softirq+0x78/0x2ac ? __do_softirq+0x60/0x2ac __irq_exit_rcu+0xa1/0xc0 sysvec_call_function_single+0x72/0x90 </IRQ> <TASK> asm_sysvec_call_function_single+0x16/0x20 RIP: 0010:_raw_spin_unlock_irq+0x14/0x30 RSP: 0018:ffffb253604cbd88 EFLAGS: 00000247 RAX: 000000000001960d RBX: 0000000000000002 RCX: ffff8cad2a064800 RDX: 000000008020001b RSI: 0000000000000001 RDI: ffff8cad5d39f66c RBP: ffff8cad5d39f600 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8caa443e0c00 R11: ffffb253604cbcd8 R12: ffff8cacb8682538 R13: 0000000000000005 R14: ffffb253604cbd90 R15: ffff8cad5d39f66c cm_process_send_error+0x122/0x1d0 [ib_cm] timeout_sends+0x1dd/0x270 [ib_core] process_one_work+0x1e2/0x3b0 ? __pfx_worker_thread+0x10/0x10 worker_thread+0x50/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xdd/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> Simplified timeout handler by creating local list of timed out WRs and invoke send handler post creating the list. The new method acquires/ releases lock once to fetch the list and hence helps to reduce locking contetiong when processing higher no. of WRs |
| CVE-2024-50094 | In the Linux kernel, the following vulnerability has been resolved: sfc: Don't invoke xdp_do_flush() from netpoll. Yury reported a crash in the sfc driver originated from netpoll_send_udp(). The netconsole sends a message and then netpoll invokes the driver's NAPI function with a budget of zero. It is dedicated to allow driver to free TX resources, that it may have used while sending the packet. In the netpoll case the driver invokes xdp_do_flush() unconditionally, leading to crash because bpf_net_context was never assigned. Invoke xdp_do_flush() only if budget is not zero. |
| CVE-2024-50093 | In the Linux kernel, the following vulnerability has been resolved: thermal: intel: int340x: processor: Fix warning during module unload The processor_thermal driver uses pcim_device_enable() to enable a PCI device, which means the device will be automatically disabled on driver detach. Thus there is no need to call pci_disable_device() again on it. With recent PCI device resource management improvements, e.g. commit f748a07a0b64 ("PCI: Remove legacy pcim_release()"), this problem is exposed and triggers the warining below. [ 224.010735] proc_thermal_pci 0000:00:04.0: disabling already-disabled device [ 224.010747] WARNING: CPU: 8 PID: 4442 at drivers/pci/pci.c:2250 pci_disable_device+0xe5/0x100 ... [ 224.010844] Call Trace: [ 224.010845] <TASK> [ 224.010847] ? show_regs+0x6d/0x80 [ 224.010851] ? __warn+0x8c/0x140 [ 224.010854] ? pci_disable_device+0xe5/0x100 [ 224.010856] ? report_bug+0x1c9/0x1e0 [ 224.010859] ? handle_bug+0x46/0x80 [ 224.010862] ? exc_invalid_op+0x1d/0x80 [ 224.010863] ? asm_exc_invalid_op+0x1f/0x30 [ 224.010867] ? pci_disable_device+0xe5/0x100 [ 224.010869] ? pci_disable_device+0xe5/0x100 [ 224.010871] ? kfree+0x21a/0x2b0 [ 224.010873] pcim_disable_device+0x20/0x30 [ 224.010875] devm_action_release+0x16/0x20 [ 224.010878] release_nodes+0x47/0xc0 [ 224.010880] devres_release_all+0x9f/0xe0 [ 224.010883] device_unbind_cleanup+0x12/0x80 [ 224.010885] device_release_driver_internal+0x1ca/0x210 [ 224.010887] driver_detach+0x4e/0xa0 [ 224.010889] bus_remove_driver+0x6f/0xf0 [ 224.010890] driver_unregister+0x35/0x60 [ 224.010892] pci_unregister_driver+0x44/0x90 [ 224.010894] proc_thermal_pci_driver_exit+0x14/0x5f0 [processor_thermal_device_pci] ... [ 224.010921] ---[ end trace 0000000000000000 ]--- Remove the excess pci_disable_device() calls. [ rjw: Subject and changelog edits ] |
| CVE-2024-50092 | In the Linux kernel, the following vulnerability has been resolved: net: netconsole: fix wrong warning A warning is triggered when there is insufficient space in the buffer for userdata. However, this is not an issue since userdata will be sent in the next iteration. Current warning message: ------------[ cut here ]------------ WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0 ? write_ext_msg+0x3b6/0x3d0 console_flush_all+0x1e9/0x330 The code incorrectly issues a warning when this_chunk is zero, which is a valid scenario. The warning should only be triggered when this_chunk is negative. |
| CVE-2024-50091 | In the Linux kernel, the following vulnerability has been resolved: dm vdo: don't refer to dedupe_context after releasing it Clear the dedupe_context pointer in a data_vio whenever ownership of the context is lost, so that vdo can't examine it accidentally. |
| CVE-2024-50090 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix overflow in oa batch buffer By default xe_bb_create_job() appends a MI_BATCH_BUFFER_END to batch buffer, this is not a problem if batch buffer is only used once but oa reuses the batch buffer for the same metric and at each call it appends a MI_BATCH_BUFFER_END, printing the warning below and then overflowing. [ 381.072016] ------------[ cut here ]------------ [ 381.072019] xe 0000:00:02.0: [drm] Assertion `bb->len * 4 + bb_prefetch(q->gt) <= size` failed! platform: LUNARLAKE subplatform: 1 graphics: Xe2_LPG / Xe2_HPG 20.04 step B0 media: Xe2_LPM / Xe2_HPM 20.00 step B0 tile: 0 VRAM 0 B GT: 0 type 1 So here checking if batch buffer already have MI_BATCH_BUFFER_END if not append it. v2: - simply fix, suggestion from Ashutosh (cherry picked from commit 9ba0e0f30ca42a98af3689460063edfb6315718a) |
| CVE-2024-50089 | In the Linux kernel, the following vulnerability has been resolved: unicode: Don't special case ignorable code points We don't need to handle them separately. Instead, just let them decompose/casefold to themselves. |
| CVE-2024-50088 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix uninitialized pointer free in add_inode_ref() The add_inode_ref() function does not initialize the "name" struct when it is declared. If any of the following calls to "read_one_inode() returns NULL, dir = read_one_inode(root, parent_objectid); if (!dir) { ret = -ENOENT; goto out; } inode = read_one_inode(root, inode_objectid); if (!inode) { ret = -EIO; goto out; } then "name.name" would be freed on "out" before being initialized. out: ... kfree(name.name); This issue was reported by Coverity with CID 1526744. |
| CVE-2024-50087 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix uninitialized pointer free on read_alloc_one_name() error The function read_alloc_one_name() does not initialize the name field of the passed fscrypt_str struct if kmalloc fails to allocate the corresponding buffer. Thus, it is not guaranteed that fscrypt_str.name is initialized when freeing it. This is a follow-up to the linked patch that fixes the remaining instances of the bug introduced by commit e43eec81c516 ("btrfs: use struct qstr instead of name and namelen pairs"). |
| CVE-2024-50086 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix user-after-free from session log off There is racy issue between smb2 session log off and smb2 session setup. It will cause user-after-free from session log off. This add session_lock when setting SMB2_SESSION_EXPIRED and referece count to session struct not to free session while it is being used. |
| CVE-2024-50085 | In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow Syzkaller reported this splat: ================================================================== BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662 CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c254515dc6 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline] mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572 mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg net/socket.c:744 [inline] ____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2661 __sys_sendmsg+0x117/0x1f0 net/socket.c:2690 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7fe4579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f574556c EFLAGS: 00000296 ORIG_RAX: 0000000000000172 RAX: ffffffffffffffda RBX: 000000000000000b RCX: 0000000020000140 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 5387: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] subflow_create_ctx+0x87/0x2a0 net/mptcp/subflow.c:1803 subflow_ulp_init+0xc3/0x4d0 net/mptcp/subflow.c:1956 __tcp_set_ulp net/ipv4/tcp_ulp.c:146 [inline] tcp_set_ulp+0x326/0x7f0 net/ipv4/tcp_ulp.c:167 mptcp_subflow_create_socket+0x4ae/0x10a0 net/mptcp/subflow.c:1764 __mptcp_subflow_connect+0x3cc/0x1490 net/mptcp/subflow.c:1592 mptcp_pm_create_subflow_or_signal_addr+0xbda/0x23a0 net/mptcp/pm_netlink.c:642 mptcp_pm_nl_fully_established net/mptcp/pm_netlink.c:650 [inline] mptcp_pm_nl_work+0x3a1/0x4f0 net/mptcp/pm_netlink.c:943 mptcp_worker+0x15a/0x1240 net/mptcp/protocol.c:2777 process_one_work+0x958/0x1b30 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/ke ---truncated--- |
| CVE-2024-50084 | In the Linux kernel, the following vulnerability has been resolved: net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test() Commit a3c1e45156ad ("net: microchip: vcap: Fix use-after-free error in kunit test") fixed the use-after-free error, but introduced below memory leaks by removing necessary vcap_free_rule(), add it to fix it. unreferenced object 0xffffff80ca58b700 (size 192): comm "kunit_try_catch", pid 1215, jiffies 4294898264 hex dump (first 32 bytes): 00 12 7a 00 05 00 00 00 0a 00 00 00 64 00 00 00 ..z.........d... 00 00 00 00 00 00 00 00 00 04 0b cc 80 ff ff ff ................ backtrace (crc 9c09c3fe): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<0000000040a01b8d>] vcap_alloc_rule+0x3cc/0x9c4 [<000000003fe86110>] vcap_api_encode_rule_test+0x1ac/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0400 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 04 0b cc 80 ff ff ff 18 b7 58 ca 80 ff ff ff ..........X..... 39 00 00 00 02 00 00 00 06 05 04 03 02 01 ff ff 9............... backtrace (crc daf014e9): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000dfdb1e81>] vcap_api_encode_rule_test+0x224/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0700 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 07 0b cc 80 ff ff ff 28 b7 58 ca 80 ff ff ff ........(.X..... 3c 00 00 00 00 00 00 00 01 2f 03 b3 ec ff ff ff <......../...... backtrace (crc 8d877792): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000006eadfab7>] vcap_rule_add_action+0x2d0/0x52c [<00000000323475d1>] vcap_api_encode_rule_test+0x4d4/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0900 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 80 09 0b cc 80 ff ff ff 80 06 0b cc 80 ff ff ff ................ 7d 00 00 00 01 00 00 00 00 00 00 00 ff 00 00 00 }............... backtrace (crc 34181e56): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000991e3564>] vcap_val_rule+0xcf0/0x13e8 [<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0980 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 18 b7 58 ca 80 ff ff ff 00 09 0b cc 80 ff ff ff ..X............. 67 00 00 00 00 00 00 00 01 01 74 88 c0 ff ff ff g.........t..... backtrace (crc 275fd9be): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<000000001396a1a2>] test_add_de ---truncated--- |
| CVE-2024-50083 | In the Linux kernel, the following vulnerability has been resolved: tcp: fix mptcp DSS corruption due to large pmtu xmit Syzkaller was able to trigger a DSS corruption: TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Modules linked in: CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not tainted 6.11.0-syzkaller-08829-gaf9c191ac2a0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:__mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Code: 0f b6 dc 31 ff 89 de e8 b5 dd ea f5 89 d8 48 81 c4 50 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 98 da ea f5 90 <0f> 0b 90 e9 47 ff ff ff e8 8a da ea f5 90 0f 0b 90 e9 99 e0 ff ff RSP: 0018:ffffc90000006db8 EFLAGS: 00010246 RAX: ffffffff8ba9df18 RBX: 00000000000055f0 RCX: ffff888030023c00 RDX: 0000000000000100 RSI: 00000000000081e5 RDI: 00000000000055f0 RBP: 1ffff110062bf1ae R08: ffffffff8ba9cf12 R09: 1ffff110062bf1b8 R10: dffffc0000000000 R11: ffffed10062bf1b9 R12: 0000000000000000 R13: dffffc0000000000 R14: 00000000700cec61 R15: 00000000000081e5 FS: 000055556679c380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020287000 CR3: 0000000077892000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> move_skbs_to_msk net/mptcp/protocol.c:811 [inline] mptcp_data_ready+0x29c/0xa90 net/mptcp/protocol.c:854 subflow_data_ready+0x34a/0x920 net/mptcp/subflow.c:1490 tcp_data_queue+0x20fd/0x76c0 net/ipv4/tcp_input.c:5283 tcp_rcv_established+0xfba/0x2020 net/ipv4/tcp_input.c:6237 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2350 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5662 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6107 __napi_poll+0xcb/0x490 net/core/dev.c:6771 napi_poll net/core/dev.c:6840 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6962 handle_softirqs+0x2c5/0x980 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x1764/0x3e80 net/core/dev.c:4451 dev_queue_xmit include/linux/netdevice.h:3094 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236 ip_local_out net/ipv4/ip_output.c:130 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:536 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_mtu_probe net/ipv4/tcp_output.c:2547 [inline] tcp_write_xmit+0x641d/0x6bf0 net/ipv4/tcp_output.c:2752 __tcp_push_pending_frames+0x9b/0x360 net/ipv4/tcp_output.c:3015 tcp_push_pending_frames include/net/tcp.h:2107 [inline] tcp_data_snd_check net/ipv4/tcp_input.c:5714 [inline] tcp_rcv_established+0x1026/0x2020 net/ipv4/tcp_input.c:6239 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 sk_backlog_rcv include/net/sock.h:1113 [inline] __release_sock+0x214/0x350 net/core/sock.c:3072 release_sock+0x61/0x1f0 net/core/sock.c:3626 mptcp_push_ ---truncated--- |
| CVE-2024-50082 | In the Linux kernel, the following vulnerability has been resolved: blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race We're seeing crashes from rq_qos_wake_function that look like this: BUG: unable to handle page fault for address: ffffafe180a40084 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40 Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00 RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084 RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011 R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002 R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> try_to_wake_up+0x5a/0x6a0 rq_qos_wake_function+0x71/0x80 __wake_up_common+0x75/0xa0 __wake_up+0x36/0x60 scale_up.part.0+0x50/0x110 wb_timer_fn+0x227/0x450 ... So rq_qos_wake_function() calls wake_up_process(data->task), which calls try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock). p comes from data->task, and data comes from the waitqueue entry, which is stored on the waiter's stack in rq_qos_wait(). Analyzing the core dump with drgn, I found that the waiter had already woken up and moved on to a completely unrelated code path, clobbering what was previously data->task. Meanwhile, the waker was passing the clobbered garbage in data->task to wake_up_process(), leading to the crash. What's happening is that in between rq_qos_wake_function() deleting the waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding that it already got a token and returning. The race looks like this: rq_qos_wait() rq_qos_wake_function() ============================================================== prepare_to_wait_exclusive() data->got_token = true; list_del_init(&curr->entry); if (data.got_token) break; finish_wait(&rqw->wait, &data.wq); ^- returns immediately because list_empty_careful(&wq_entry->entry) is true ... return, go do something else ... wake_up_process(data->task) (NO LONGER VALID!)-^ Normally, finish_wait() is supposed to synchronize against the waker. But, as noted above, it is returning immediately because the waitqueue entry has already been removed from the waitqueue. The bug is that rq_qos_wake_function() is accessing the waitqueue entry AFTER deleting it. Note that autoremove_wake_function() wakes the waiter and THEN deletes the waitqueue entry, which is the proper order. Fix it by swapping the order. We also need to use list_del_init_careful() to match the list_empty_careful() in finish_wait(). |
| CVE-2024-50081 | In the Linux kernel, the following vulnerability has been resolved: blk-mq: setup queue ->tag_set before initializing hctx Commit 7b815817aa58 ("blk-mq: add helper for checking if one CPU is mapped to specified hctx") needs to check queue mapping via tag set in hctx's cpuhp handler. However, q->tag_set may not be setup yet when the cpuhp handler is enabled, then kernel oops is triggered. Fix the issue by setup queue tag_set before initializing hctx. |
| CVE-2024-50080 | In the Linux kernel, the following vulnerability has been resolved: ublk: don't allow user copy for unprivileged device UBLK_F_USER_COPY requires userspace to call write() on ublk char device for filling request buffer, and unprivileged device can't be trusted. So don't allow user copy for unprivileged device. |
| CVE-2024-50079 | In the Linux kernel, the following vulnerability has been resolved: io_uring/sqpoll: ensure task state is TASK_RUNNING when running task_work When the sqpoll is exiting and cancels pending work items, it may need to run task_work. If this happens from within io_uring_cancel_generic(), then it may be under waiting for the io_uring_task waitqueue. This results in the below splat from the scheduler, as the ring mutex may be attempted grabbed while in a TASK_INTERRUPTIBLE state. Ensure that the task state is set appropriately for that, just like what is done for the other cases in io_run_task_work(). do not call blocking ops when !TASK_RUNNING; state=1 set at [<0000000029387fd2>] prepare_to_wait+0x88/0x2fc WARNING: CPU: 6 PID: 59939 at kernel/sched/core.c:8561 __might_sleep+0xf4/0x140 Modules linked in: CPU: 6 UID: 0 PID: 59939 Comm: iou-sqp-59938 Not tainted 6.12.0-rc3-00113-g8d020023b155 #7456 Hardware name: linux,dummy-virt (DT) pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : __might_sleep+0xf4/0x140 lr : __might_sleep+0xf4/0x140 sp : ffff80008c5e7830 x29: ffff80008c5e7830 x28: ffff0000d93088c0 x27: ffff60001c2d7230 x26: dfff800000000000 x25: ffff0000e16b9180 x24: ffff80008c5e7a50 x23: 1ffff000118bcf4a x22: ffff0000e16b9180 x21: ffff0000e16b9180 x20: 000000000000011b x19: ffff80008310fac0 x18: 1ffff000118bcd90 x17: 30303c5b20746120 x16: 74657320313d6574 x15: 0720072007200720 x14: 0720072007200720 x13: 0720072007200720 x12: ffff600036c64f0b x11: 1fffe00036c64f0a x10: ffff600036c64f0a x9 : dfff800000000000 x8 : 00009fffc939b0f6 x7 : ffff0001b6327853 x6 : 0000000000000001 x5 : ffff0001b6327850 x4 : ffff600036c64f0b x3 : ffff8000803c35bc x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000e16b9180 Call trace: __might_sleep+0xf4/0x140 mutex_lock+0x84/0x124 io_handle_tw_list+0xf4/0x260 tctx_task_work_run+0x94/0x340 io_run_task_work+0x1ec/0x3c0 io_uring_cancel_generic+0x364/0x524 io_sq_thread+0x820/0x124c ret_from_fork+0x10/0x20 |
| CVE-2024-50078 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Call iso_exit() on module unload If iso_init() has been called, iso_exit() must be called on module unload. Without that, the struct proto that iso_init() registered with proto_register() becomes invalid, which could cause unpredictable problems later. In my case, with CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, loading the module again usually triggers this BUG(): list_add corruption. next->prev should be prev (ffffffffb5355fd0), but was 0000000000000068. (next=ffffffffc0a010d0). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 4159 Comm: modprobe Not tainted 6.10.11-4+bt2-ao-desktop #1 RIP: 0010:__list_add_valid_or_report+0x61/0xa0 ... __list_add_valid_or_report+0x61/0xa0 proto_register+0x299/0x320 hci_sock_init+0x16/0xc0 [bluetooth] bt_init+0x68/0xd0 [bluetooth] __pfx_bt_init+0x10/0x10 [bluetooth] do_one_initcall+0x80/0x2f0 do_init_module+0x8b/0x230 __do_sys_init_module+0x15f/0x190 do_syscall_64+0x68/0x110 ... |
| CVE-2024-50077 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix multiple init when debugfs is disabled If bt_debugfs is not created successfully, which happens if either CONFIG_DEBUG_FS or CONFIG_DEBUG_FS_ALLOW_ALL is unset, then iso_init() returns early and does not set iso_inited to true. This means that a subsequent call to iso_init() will result in duplicate calls to proto_register(), bt_sock_register(), etc. With CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, the duplicate call to proto_register() triggers this BUG(): list_add double add: new=ffffffffc0b280d0, prev=ffffffffbab56250, next=ffffffffc0b280d0. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:35! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 887 Comm: bluetoothd Not tainted 6.10.11-1-ao-desktop #1 RIP: 0010:__list_add_valid_or_report+0x9a/0xa0 ... __list_add_valid_or_report+0x9a/0xa0 proto_register+0x2b5/0x340 iso_init+0x23/0x150 [bluetooth] set_iso_socket_func+0x68/0x1b0 [bluetooth] kmem_cache_free+0x308/0x330 hci_sock_sendmsg+0x990/0x9e0 [bluetooth] __sock_sendmsg+0x7b/0x80 sock_write_iter+0x9a/0x110 do_iter_readv_writev+0x11d/0x220 vfs_writev+0x180/0x3e0 do_writev+0xca/0x100 ... This change removes the early return. The check for iso_debugfs being NULL was unnecessary, it is always NULL when iso_inited is false. |
| CVE-2024-50076 | In the Linux kernel, the following vulnerability has been resolved: vt: prevent kernel-infoleak in con_font_get() font.data may not initialize all memory spaces depending on the implementation of vc->vc_sw->con_font_get. This may cause info-leak, so to prevent this, it is safest to modify it to initialize the allocated memory space to 0, and it generally does not affect the overall performance of the system. |
| CVE-2024-50075 | In the Linux kernel, the following vulnerability has been resolved: xhci: tegra: fix checked USB2 port number If USB virtualizatoin is enabled, USB2 ports are shared between all Virtual Functions. The USB2 port number owned by an USB2 root hub in a Virtual Function may be less than total USB2 phy number supported by the Tegra XUSB controller. Using total USB2 phy number as port number to check all PORTSC values would cause invalid memory access. [ 116.923438] Unable to handle kernel paging request at virtual address 006c622f7665642f ... [ 117.213640] Call trace: [ 117.216783] tegra_xusb_enter_elpg+0x23c/0x658 [ 117.222021] tegra_xusb_runtime_suspend+0x40/0x68 [ 117.227260] pm_generic_runtime_suspend+0x30/0x50 [ 117.232847] __rpm_callback+0x84/0x3c0 [ 117.237038] rpm_suspend+0x2dc/0x740 [ 117.241229] pm_runtime_work+0xa0/0xb8 [ 117.245769] process_scheduled_works+0x24c/0x478 [ 117.251007] worker_thread+0x23c/0x328 [ 117.255547] kthread+0x104/0x1b0 [ 117.259389] ret_from_fork+0x10/0x20 [ 117.263582] Code: 54000222 f9461ae8 f8747908 b4ffff48 (f9400100) |
| CVE-2024-50074 | In the Linux kernel, the following vulnerability has been resolved: parport: Proper fix for array out-of-bounds access The recent fix for array out-of-bounds accesses replaced sprintf() calls blindly with snprintf(). However, since snprintf() returns the would-be-printed size, not the actually output size, the length calculation can still go over the given limit. Use scnprintf() instead of snprintf(), which returns the actually output letters, for addressing the potential out-of-bounds access properly. |
| CVE-2024-50073 | In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: Fix use-after-free in gsm_cleanup_mux BUG: KASAN: slab-use-after-free in gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] Read of size 8 at addr ffff88815fe99c00 by task poc/3379 CPU: 0 UID: 0 PID: 3379 Comm: poc Not tainted 6.11.0+ #56 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: <TASK> gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] __pfx_gsm_cleanup_mux+0x10/0x10 drivers/tty/n_gsm.c:3124 [n_gsm] __pfx_sched_clock_cpu+0x10/0x10 kernel/sched/clock.c:389 update_load_avg+0x1c1/0x27b0 kernel/sched/fair.c:4500 __pfx_min_vruntime_cb_rotate+0x10/0x10 kernel/sched/fair.c:846 __rb_insert_augmented+0x492/0xbf0 lib/rbtree.c:161 gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm] _raw_spin_lock_irqsave+0x92/0xf0 arch/x86/include/asm/atomic.h:107 __pfx_gsmld_ioctl+0x10/0x10 drivers/tty/n_gsm.c:3822 [n_gsm] ktime_get+0x5e/0x140 kernel/time/timekeeping.c:195 ldsem_down_read+0x94/0x4e0 arch/x86/include/asm/atomic64_64.h:79 __pfx_ldsem_down_read+0x10/0x10 drivers/tty/tty_ldsem.c:338 __pfx_do_vfs_ioctl+0x10/0x10 fs/ioctl.c:805 tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818 Allocated by task 65: gsm_data_alloc.constprop.0+0x27/0x190 drivers/tty/n_gsm.c:926 [n_gsm] gsm_send+0x2c/0x580 drivers/tty/n_gsm.c:819 [n_gsm] gsm1_receive+0x547/0xad0 drivers/tty/n_gsm.c:3038 [n_gsm] gsmld_receive_buf+0x176/0x280 drivers/tty/n_gsm.c:3609 [n_gsm] tty_ldisc_receive_buf+0x101/0x1e0 drivers/tty/tty_buffer.c:391 tty_port_default_receive_buf+0x61/0xa0 drivers/tty/tty_port.c:39 flush_to_ldisc+0x1b0/0x750 drivers/tty/tty_buffer.c:445 process_scheduled_works+0x2b0/0x10d0 kernel/workqueue.c:3229 worker_thread+0x3dc/0x950 kernel/workqueue.c:3391 kthread+0x2a3/0x370 kernel/kthread.c:389 ret_from_fork+0x2d/0x70 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:257 Freed by task 3367: kfree+0x126/0x420 mm/slub.c:4580 gsm_cleanup_mux+0x36c/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm] tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818 [Analysis] gsm_msg on the tx_ctrl_list or tx_data_list of gsm_mux can be freed by multi threads through ioctl,which leads to the occurrence of uaf. Protect it by gsm tx lock. |
| CVE-2024-50072 | In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Use code segment selector for VERW operand Robert Gill reported below #GP in 32-bit mode when dosemu software was executing vm86() system call: general protection fault: 0000 [#1] PREEMPT SMP CPU: 4 PID: 4610 Comm: dosemu.bin Not tainted 6.6.21-gentoo-x86 #1 Hardware name: Dell Inc. PowerEdge 1950/0H723K, BIOS 2.7.0 10/30/2010 EIP: restore_all_switch_stack+0xbe/0xcf EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: ff8affdc DS: 0000 ES: 0000 FS: 0000 GS: 0033 SS: 0068 EFLAGS: 00010046 CR0: 80050033 CR2: 00c2101c CR3: 04b6d000 CR4: 000406d0 Call Trace: show_regs+0x70/0x78 die_addr+0x29/0x70 exc_general_protection+0x13c/0x348 exc_bounds+0x98/0x98 handle_exception+0x14d/0x14d exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf This only happens in 32-bit mode when VERW based mitigations like MDS/RFDS are enabled. This is because segment registers with an arbitrary user value can result in #GP when executing VERW. Intel SDM vol. 2C documents the following behavior for VERW instruction: #GP(0) - If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. CLEAR_CPU_BUFFERS macro executes VERW instruction before returning to user space. Use %cs selector to reference VERW operand. This ensures VERW will not #GP for an arbitrary user %ds. [ mingo: Fixed the SOB chain. ] |
| CVE-2024-50071 | In the Linux kernel, the following vulnerability has been resolved: pinctrl: nuvoton: fix a double free in ma35_pinctrl_dt_node_to_map_func() 'new_map' is allocated using devm_* which takes care of freeing the allocated data on device removal, call to .dt_free_map = pinconf_generic_dt_free_map double frees the map as pinconf_generic_dt_free_map() calls pinctrl_utils_free_map(). Fix this by using kcalloc() instead of auto-managed devm_kcalloc(). |
| CVE-2024-50070 | In the Linux kernel, the following vulnerability has been resolved: pinctrl: stm32: check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Found by code review. |
| CVE-2024-50069 | In the Linux kernel, the following vulnerability has been resolved: pinctrl: apple: check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Found by code review. |
| CVE-2024-50068 | In the Linux kernel, the following vulnerability has been resolved: mm/damon/tests/sysfs-kunit.h: fix memory leak in damon_sysfs_test_add_targets() The sysfs_target->regions allocated in damon_sysfs_regions_alloc() is not freed in damon_sysfs_test_add_targets(), which cause the following memory leak, free it to fix it. unreferenced object 0xffffff80c2a8db80 (size 96): comm "kunit_try_catch", pid 187, jiffies 4294894363 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): [<0000000001e3714d>] kmemleak_alloc+0x34/0x40 [<000000008e6835c1>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000001286d9f8>] damon_sysfs_test_add_targets+0x1cc/0x738 [<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac [<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000adf936cf>] kthread+0x2e8/0x374 [<0000000041bb1628>] ret_from_fork+0x10/0x20 |
| CVE-2024-50067 | In the Linux kernel, the following vulnerability has been resolved: uprobe: avoid out-of-bounds memory access of fetching args Uprobe needs to fetch args into a percpu buffer, and then copy to ring buffer to avoid non-atomic context problem. Sometimes user-space strings, arrays can be very large, but the size of percpu buffer is only page size. And store_trace_args() won't check whether these data exceeds a single page or not, caused out-of-bounds memory access. It could be reproduced by following steps: 1. build kernel with CONFIG_KASAN enabled 2. save follow program as test.c ``` \#include <stdio.h> \#include <stdlib.h> \#include <string.h> // If string length large than MAX_STRING_SIZE, the fetch_store_strlen() // will return 0, cause __get_data_size() return shorter size, and // store_trace_args() will not trigger out-of-bounds access. // So make string length less than 4096. \#define STRLEN 4093 void generate_string(char *str, int n) { int i; for (i = 0; i < n; ++i) { char c = i % 26 + 'a'; str[i] = c; } str[n-1] = '\0'; } void print_string(char *str) { printf("%s\n", str); } int main() { char tmp[STRLEN]; generate_string(tmp, STRLEN); print_string(tmp); return 0; } ``` 3. compile program `gcc -o test test.c` 4. get the offset of `print_string()` ``` objdump -t test | grep -w print_string 0000000000401199 g F .text 000000000000001b print_string ``` 5. configure uprobe with offset 0x1199 ``` off=0x1199 cd /sys/kernel/debug/tracing/ echo "p /root/test:${off} arg1=+0(%di):ustring arg2=\$comm arg3=+0(%di):ustring" > uprobe_events echo 1 > events/uprobes/enable echo 1 > tracing_on ``` 6. run `test`, and kasan will report error. ================================================================== BUG: KASAN: use-after-free in strncpy_from_user+0x1d6/0x1f0 Write of size 8 at addr ffff88812311c004 by task test/499CPU: 0 UID: 0 PID: 499 Comm: test Not tainted 6.12.0-rc3+ #18 Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x55/0x70 print_address_description.constprop.0+0x27/0x310 kasan_report+0x10f/0x120 ? strncpy_from_user+0x1d6/0x1f0 strncpy_from_user+0x1d6/0x1f0 ? rmqueue.constprop.0+0x70d/0x2ad0 process_fetch_insn+0xb26/0x1470 ? __pfx_process_fetch_insn+0x10/0x10 ? _raw_spin_lock+0x85/0xe0 ? __pfx__raw_spin_lock+0x10/0x10 ? __pte_offset_map+0x1f/0x2d0 ? unwind_next_frame+0xc5f/0x1f80 ? arch_stack_walk+0x68/0xf0 ? is_bpf_text_address+0x23/0x30 ? kernel_text_address.part.0+0xbb/0xd0 ? __kernel_text_address+0x66/0xb0 ? unwind_get_return_address+0x5e/0xa0 ? __pfx_stack_trace_consume_entry+0x10/0x10 ? arch_stack_walk+0xa2/0xf0 ? _raw_spin_lock_irqsave+0x8b/0xf0 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? depot_alloc_stack+0x4c/0x1f0 ? _raw_spin_unlock_irqrestore+0xe/0x30 ? stack_depot_save_flags+0x35d/0x4f0 ? kasan_save_stack+0x34/0x50 ? kasan_save_stack+0x24/0x50 ? mutex_lock+0x91/0xe0 ? __pfx_mutex_lock+0x10/0x10 prepare_uprobe_buffer.part.0+0x2cd/0x500 uprobe_dispatcher+0x2c3/0x6a0 ? __pfx_uprobe_dispatcher+0x10/0x10 ? __kasan_slab_alloc+0x4d/0x90 handler_chain+0xdd/0x3e0 handle_swbp+0x26e/0x3d0 ? __pfx_handle_swbp+0x10/0x10 ? uprobe_pre_sstep_notifier+0x151/0x1b0 irqentry_exit_to_user_mode+0xe2/0x1b0 asm_exc_int3+0x39/0x40 RIP: 0033:0x401199 Code: 01 c2 0f b6 45 fb 88 02 83 45 fc 01 8b 45 fc 3b 45 e4 7c b7 8b 45 e4 48 98 48 8d 50 ff 48 8b 45 e8 48 01 d0 ce RSP: 002b:00007ffdf00576a8 EFLAGS: 00000206 RAX: 00007ffdf00576b0 RBX: 0000000000000000 RCX: 0000000000000ff2 RDX: 0000000000000ffc RSI: 0000000000000ffd RDI: 00007ffdf00576b0 RBP: 00007ffdf00586b0 R08: 00007feb2f9c0d20 R09: 00007feb2f9c0d20 R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000401040 R13: 00007ffdf0058780 R14: 0000000000000000 R15: 0000000000000000 </TASK> This commit enforces the buffer's maxlen less than a page-size to avoid store_trace_args() out-of-memory access. |
| CVE-2024-50066 | In the Linux kernel, the following vulnerability has been resolved: mm/mremap: fix move_normal_pmd/retract_page_tables race In mremap(), move_page_tables() looks at the type of the PMD entry and the specified address range to figure out by which method the next chunk of page table entries should be moved. At that point, the mmap_lock is held in write mode, but no rmap locks are held yet. For PMD entries that point to page tables and are fully covered by the source address range, move_pgt_entry(NORMAL_PMD, ...) is called, which first takes rmap locks, then does move_normal_pmd(). move_normal_pmd() takes the necessary page table locks at source and destination, then moves an entire page table from the source to the destination. The problem is: The rmap locks, which protect against concurrent page table removal by retract_page_tables() in the THP code, are only taken after the PMD entry has been read and it has been decided how to move it. So we can race as follows (with two processes that have mappings of the same tmpfs file that is stored on a tmpfs mount with huge=advise); note that process A accesses page tables through the MM while process B does it through the file rmap: process A process B ========= ========= mremap mremap_to move_vma move_page_tables get_old_pmd alloc_new_pmd *** PREEMPT *** madvise(MADV_COLLAPSE) do_madvise madvise_walk_vmas madvise_vma_behavior madvise_collapse hpage_collapse_scan_file collapse_file retract_page_tables i_mmap_lock_read(mapping) pmdp_collapse_flush i_mmap_unlock_read(mapping) move_pgt_entry(NORMAL_PMD, ...) take_rmap_locks move_normal_pmd drop_rmap_locks When this happens, move_normal_pmd() can end up creating bogus PMD entries in the line `pmd_populate(mm, new_pmd, pmd_pgtable(pmd))`. The effect depends on arch-specific and machine-specific details; on x86, you can end up with physical page 0 mapped as a page table, which is likely exploitable for user->kernel privilege escalation. Fix the race by letting process B recheck that the PMD still points to a page table after the rmap locks have been taken. Otherwise, we bail and let the caller fall back to the PTE-level copying path, which will then bail immediately at the pmd_none() check. Bug reachability: Reaching this bug requires that you can create shmem/file THP mappings - anonymous THP uses different code that doesn't zap stuff under rmap locks. File THP is gated on an experimental config flag (CONFIG_READ_ONLY_THP_FOR_FS), so on normal distro kernels you need shmem THP to hit this bug. As far as I know, getting shmem THP normally requires that you can mount your own tmpfs with the right mount flags, which would require creating your own user+mount namespace; though I don't know if some distros maybe enable shmem THP by default or something like that. Bug impact: This issue can likely be used for user->kernel privilege escalation when it is reachable. |
| CVE-2024-50065 | In the Linux kernel, the following vulnerability has been resolved: ntfs3: Change to non-blocking allocation in ntfs_d_hash d_hash is done while under "rcu-walk" and should not sleep. __get_name() allocates using GFP_KERNEL, having the possibility to sleep when under memory pressure. Change the allocation to GFP_NOWAIT. |
| CVE-2024-50064 | In the Linux kernel, the following vulnerability has been resolved: zram: free secondary algorithms names We need to kfree() secondary algorithms names when reset zram device that had multi-streams, otherwise we leak memory. [[email protected]: kfree(NULL) is legal] Link: https://lkml.kernel.org/r/[email protected] |
| CVE-2024-50063 | In the Linux kernel, the following vulnerability has been resolved: bpf: Prevent tail call between progs attached to different hooks bpf progs can be attached to kernel functions, and the attached functions can take different parameters or return different return values. If prog attached to one kernel function tail calls prog attached to another kernel function, the ctx access or return value verification could be bypassed. For example, if prog1 is attached to func1 which takes only 1 parameter and prog2 is attached to func2 which takes two parameters. Since verifier assumes the bpf ctx passed to prog2 is constructed based on func2's prototype, verifier allows prog2 to access the second parameter from the bpf ctx passed to it. The problem is that verifier does not prevent prog1 from passing its bpf ctx to prog2 via tail call. In this case, the bpf ctx passed to prog2 is constructed from func1 instead of func2, that is, the assumption for ctx access verification is bypassed. Another example, if BPF LSM prog1 is attached to hook file_alloc_security, and BPF LSM prog2 is attached to hook bpf_lsm_audit_rule_known. Verifier knows the return value rules for these two hooks, e.g. it is legal for bpf_lsm_audit_rule_known to return positive number 1, and it is illegal for file_alloc_security to return positive number. So verifier allows prog2 to return positive number 1, but does not allow prog1 to return positive number. The problem is that verifier does not prevent prog1 from calling prog2 via tail call. In this case, prog2's return value 1 will be used as the return value for prog1's hook file_alloc_security. That is, the return value rule is bypassed. This patch adds restriction for tail call to prevent such bypasses. |
| CVE-2024-50062 | In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Avoid null pointer deref during path establishment For RTRS path establishment, RTRS client initiates and completes con_num of connections. After establishing all its connections, the information is exchanged between the client and server through the info_req message. During this exchange, it is essential that all connections have been established, and the state of the RTRS srv path is CONNECTED. So add these sanity checks, to make sure we detect and abort process in error scenarios to avoid null pointer deref. |
| CVE-2024-50061 | In the Linux kernel, the following vulnerability has been resolved: i3c: master: cdns: Fix use after free vulnerability in cdns_i3c_master Driver Due to Race Condition In the cdns_i3c_master_probe function, &master->hj_work is bound with cdns_i3c_master_hj. And cdns_i3c_master_interrupt can call cnds_i3c_master_demux_ibis function to start the work. If we remove the module which will call cdns_i3c_master_remove to make cleanup, it will free master->base through i3c_master_unregister while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | cdns_i3c_master_hj cdns_i3c_master_remove | i3c_master_unregister(&master->base) | device_unregister(&master->dev) | device_release | //free master->base | | i3c_master_do_daa(&master->base) | //use master->base Fix it by ensuring that the work is canceled before proceeding with the cleanup in cdns_i3c_master_remove. |
| CVE-2024-50060 | In the Linux kernel, the following vulnerability has been resolved: io_uring: check if we need to reschedule during overflow flush In terms of normal application usage, this list will always be empty. And if an application does overflow a bit, it'll have a few entries. However, nothing obviously prevents syzbot from running a test case that generates a ton of overflow entries, and then flushing them can take quite a while. Check for needing to reschedule while flushing, and drop our locks and do so if necessary. There's no state to maintain here as overflows always prune from head-of-list, hence it's fine to drop and reacquire the locks at the end of the loop. |
| CVE-2024-50059 | In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev function, then &sndev->check_link_status_work is bound with check_link_status_work. switchtec_ntb_link_notification may be called to start the work. If we remove the module which will call switchtec_ntb_remove to make cleanup, it will free sndev through kfree(sndev), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | check_link_status_work switchtec_ntb_remove | kfree(sndev); | | if (sndev->link_force_down) | // use sndev Fix it by ensuring that the work is canceled before proceeding with the cleanup in switchtec_ntb_remove. |
| CVE-2024-50058 | In the Linux kernel, the following vulnerability has been resolved: serial: protect uart_port_dtr_rts() in uart_shutdown() too Commit af224ca2df29 (serial: core: Prevent unsafe uart port access, part 3) added few uport == NULL checks. It added one to uart_shutdown(), so the commit assumes, uport can be NULL in there. But right after that protection, there is an unprotected "uart_port_dtr_rts(uport, false);" call. That is invoked only if HUPCL is set, so I assume that is the reason why we do not see lots of these reports. Or it cannot be NULL at this point at all for some reason :P. Until the above is investigated, stay on the safe side and move this dereference to the if too. I got this inconsistency from Coverity under CID 1585130. Thanks. |
| CVE-2024-50057 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tipd: Free IRQ only if it was requested before In polling mode, if no IRQ was requested there is no need to free it. Call devm_free_irq() only if client->irq is set. This fixes the warning caused by the tps6598x module removal: WARNING: CPU: 2 PID: 333 at kernel/irq/devres.c:144 devm_free_irq+0x80/0x8c ... ... Call trace: devm_free_irq+0x80/0x8c tps6598x_remove+0x28/0x88 [tps6598x] i2c_device_remove+0x2c/0x9c device_remove+0x4c/0x80 device_release_driver_internal+0x1cc/0x228 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 i2c_del_driver+0x54/0x64 tps6598x_i2c_driver_exit+0x18/0xc3c [tps6598x] __arm64_sys_delete_module+0x184/0x264 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0xc8/0xe8 do_el0_svc+0x20/0x2c el0_svc+0x28/0x98 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 |
| CVE-2024-50056 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Fix ERR_PTR dereference in uvc_v4l2.c Fix potential dereferencing of ERR_PTR() in find_format_by_pix() and uvc_v4l2_enum_format(). Fix the following smatch errors: drivers/usb/gadget/function/uvc_v4l2.c:124 find_format_by_pix() error: 'fmtdesc' dereferencing possible ERR_PTR() drivers/usb/gadget/function/uvc_v4l2.c:392 uvc_v4l2_enum_format() error: 'fmtdesc' dereferencing possible ERR_PTR() Also, fix similar issue in uvc_v4l2_try_format() for potential dereferencing of ERR_PTR(). |
| CVE-2024-50055 | In the Linux kernel, the following vulnerability has been resolved: driver core: bus: Fix double free in driver API bus_register() For bus_register(), any error which happens after kset_register() will cause that @priv are freed twice, fixed by setting @priv with NULL after the first free. |
| CVE-2024-50049 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointer before dereferencing se [WHAT & HOW] se is null checked previously in the same function, indicating it might be null; therefore, it must be checked when used again. This fixes 1 FORWARD_NULL issue reported by Coverity. |
| CVE-2024-50048 | In the Linux kernel, the following vulnerability has been resolved: fbcon: Fix a NULL pointer dereference issue in fbcon_putcs syzbot has found a NULL pointer dereference bug in fbcon. Here is the simplified C reproducer: struct param { uint8_t type; struct tiocl_selection ts; }; int main() { struct fb_con2fbmap con2fb; struct param param; int fd = open("/dev/fb1", 0, 0); con2fb.console = 0x19; con2fb.framebuffer = 0; ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb); param.type = 2; param.ts.xs = 0; param.ts.ys = 0; param.ts.xe = 0; param.ts.ye = 0; param.ts.sel_mode = 0; int fd1 = open("/dev/tty1", O_RDWR, 0); ioctl(fd1, TIOCLINUX, ¶m); con2fb.console = 1; con2fb.framebuffer = 0; ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb); return 0; } After calling ioctl(fd1, TIOCLINUX, ¶m), the subsequent ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb) causes the kernel to follow a different execution path: set_con2fb_map -> con2fb_init_display -> fbcon_set_disp -> redraw_screen -> hide_cursor -> clear_selection -> highlight -> invert_screen -> do_update_region -> fbcon_putcs -> ops->putcs Since ops->putcs is a NULL pointer, this leads to a kernel panic. To prevent this, we need to call set_blitting_type() within set_con2fb_map() to properly initialize ops->putcs. |
| CVE-2024-50047 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF in async decryption Doing an async decryption (large read) crashes with a slab-use-after-free way down in the crypto API. Reproducer: # mount.cifs -o ...,seal,esize=1 //srv/share /mnt # dd if=/mnt/largefile of=/dev/null ... [ 194.196391] ================================================================== [ 194.196844] BUG: KASAN: slab-use-after-free in gf128mul_4k_lle+0xc1/0x110 [ 194.197269] Read of size 8 at addr ffff888112bd0448 by task kworker/u77:2/899 [ 194.197707] [ 194.197818] CPU: 12 UID: 0 PID: 899 Comm: kworker/u77:2 Not tainted 6.11.0-lku-00028-gfca3ca14a17a-dirty #43 [ 194.198400] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-prebuilt.qemu.org 04/01/2014 [ 194.199046] Workqueue: smb3decryptd smb2_decrypt_offload [cifs] [ 194.200032] Call Trace: [ 194.200191] <TASK> [ 194.200327] dump_stack_lvl+0x4e/0x70 [ 194.200558] ? gf128mul_4k_lle+0xc1/0x110 [ 194.200809] print_report+0x174/0x505 [ 194.201040] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 194.201352] ? srso_return_thunk+0x5/0x5f [ 194.201604] ? __virt_addr_valid+0xdf/0x1c0 [ 194.201868] ? gf128mul_4k_lle+0xc1/0x110 [ 194.202128] kasan_report+0xc8/0x150 [ 194.202361] ? gf128mul_4k_lle+0xc1/0x110 [ 194.202616] gf128mul_4k_lle+0xc1/0x110 [ 194.202863] ghash_update+0x184/0x210 [ 194.203103] shash_ahash_update+0x184/0x2a0 [ 194.203377] ? __pfx_shash_ahash_update+0x10/0x10 [ 194.203651] ? srso_return_thunk+0x5/0x5f [ 194.203877] ? crypto_gcm_init_common+0x1ba/0x340 [ 194.204142] gcm_hash_assoc_remain_continue+0x10a/0x140 [ 194.204434] crypt_message+0xec1/0x10a0 [cifs] [ 194.206489] ? __pfx_crypt_message+0x10/0x10 [cifs] [ 194.208507] ? srso_return_thunk+0x5/0x5f [ 194.209205] ? srso_return_thunk+0x5/0x5f [ 194.209925] ? srso_return_thunk+0x5/0x5f [ 194.210443] ? srso_return_thunk+0x5/0x5f [ 194.211037] decrypt_raw_data+0x15f/0x250 [cifs] [ 194.212906] ? __pfx_decrypt_raw_data+0x10/0x10 [cifs] [ 194.214670] ? srso_return_thunk+0x5/0x5f [ 194.215193] smb2_decrypt_offload+0x12a/0x6c0 [cifs] This is because TFM is being used in parallel. Fix this by allocating a new AEAD TFM for async decryption, but keep the existing one for synchronous READ cases (similar to what is done in smb3_calc_signature()). Also remove the calls to aead_request_set_callback() and crypto_wait_req() since it's always going to be a synchronous operation. |
| CVE-2024-50046 | In the Linux kernel, the following vulnerability has been resolved: NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies() On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 00000000000000 ---truncated--- |
| CVE-2024-50045 | In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: fix panic with metadata_dst skb Fix a kernel panic in the br_netfilter module when sending untagged traffic via a VxLAN device. This happens during the check for fragmentation in br_nf_dev_queue_xmit. It is dependent on: 1) the br_netfilter module being loaded; 2) net.bridge.bridge-nf-call-iptables set to 1; 3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port; 4) untagged frames with size higher than the VxLAN MTU forwarded/flooded When forwarding the untagged packet to the VxLAN bridge port, before the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL. Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check for frames that needs to be fragmented: frames with higher MTU than the VxLAN device end up calling br_nf_ip_fragment, which in turns call ip_skb_dst_mtu. The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst with valid dst->dev, thus the crash. This case was never supported in the first place, so drop the packet instead. PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data. [ 176.291791] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000110 [ 176.292101] Mem abort info: [ 176.292184] ESR = 0x0000000096000004 [ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits [ 176.292530] SET = 0, FnV = 0 [ 176.292709] EA = 0, S1PTW = 0 [ 176.292862] FSC = 0x04: level 0 translation fault [ 176.293013] Data abort info: [ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000 [ 176.294166] [0000000000000110] pgd=0000000000000000, p4d=0000000000000000 [ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth br_netfilter bridge stp llc ipv6 crct10dif_ce [ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted 6.8.0-rc3-g5b3fbd61b9d1 #2 [ 176.296314] Hardware name: linux,dummy-virt (DT) [ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter] [ 176.297636] sp : ffff800080003630 [ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27: ffff6828c49ad9f8 [ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24: 00000000000003e8 [ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21: ffff6828c3b16d28 [ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18: 0000000000000014 [ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15: 0000000095744632 [ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12: ffffb7e137926a70 [ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 : 0000000000000000 [ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 : f20e0100bebafeca [ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 : 0000000000000000 [ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 : ffff6828c7f918f0 [ 176.300889] Call trace: [ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter] [ 176.301703] nf_hook_slow+0x48/0x124 [ 176.302060] br_forward_finish+0xc8/0xe8 [bridge] [ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter] [ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter] [ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter] [ 176.303359] nf_hook_slow+0x48/0x124 [ 176.303 ---truncated--- |
| CVE-2024-50044 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_change rfcomm_sk_state_change attempts to use sock_lock so it must never be called with it locked but rfcomm_sock_ioctl always attempt to lock it causing the following trace: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted ------------------------------------------------------ syz-executor386/5093 is trying to acquire lock: ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline] ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73 but task is already holding lock: ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491 |
| CVE-2024-50043 | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix possible badness in FREE_STATEID When multiple FREE_STATEIDs are sent for the same delegation stateid, it can lead to a possible either use-after-free or counter refcount underflow errors. In nfsd4_free_stateid() under the client lock we find a delegation stateid, however the code drops the lock before calling nfs4_put_stid(), that allows another FREE_STATE to find the stateid again. The first one will proceed to then free the stateid which leads to either use-after-free or decrementing already zeroed counter. |
| CVE-2024-50042 | In the Linux kernel, the following vulnerability has been resolved: ice: Fix increasing MSI-X on VF Increasing MSI-X value on a VF leads to invalid memory operations. This is caused by not reallocating some arrays. Reproducer: modprobe ice echo 0 > /sys/bus/pci/devices/$PF_PCI/sriov_drivers_autoprobe echo 1 > /sys/bus/pci/devices/$PF_PCI/sriov_numvfs echo 17 > /sys/bus/pci/devices/$VF0_PCI/sriov_vf_msix_count Default MSI-X is 16, so 17 and above triggers this issue. KASAN reports: BUG: KASAN: slab-out-of-bounds in ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] Read of size 8 at addr ffff8888b937d180 by task bash/28433 (...) Call Trace: (...) ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] kasan_report+0xed/0x120 ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_cfg_def+0x3360/0x4770 [ice] ? mutex_unlock+0x83/0xd0 ? __pfx_ice_vsi_cfg_def+0x10/0x10 [ice] ? __pfx_ice_remove_vsi_lkup_fltr+0x10/0x10 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vf_reconfig_vsi+0x114/0x210 [ice] ice_sriov_set_msix_vec_count+0x3d0/0x960 [ice] sriov_vf_msix_count_store+0x21c/0x300 (...) Allocated by task 28201: (...) ice_vsi_cfg_def+0x1c8e/0x4770 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vsi_setup+0x179/0xa30 [ice] ice_sriov_configure+0xcaa/0x1520 [ice] sriov_numvfs_store+0x212/0x390 (...) To fix it, use ice_vsi_rebuild() instead of ice_vf_reconfig_vsi(). This causes the required arrays to be reallocated taking the new queue count into account (ice_vsi_realloc_stat_arrays()). Set req_txq and req_rxq before ice_vsi_rebuild(), so that realloc uses the newly set queue count. Additionally, ice_vsi_rebuild() does not remove VSI filters (ice_fltr_remove_all()), so ice_vf_init_host_cfg() is no longer necessary. |
| CVE-2024-50041 | In the Linux kernel, the following vulnerability has been resolved: i40e: Fix macvlan leak by synchronizing access to mac_filter_hash This patch addresses a macvlan leak issue in the i40e driver caused by concurrent access to vsi->mac_filter_hash. The leak occurs when multiple threads attempt to modify the mac_filter_hash simultaneously, leading to inconsistent state and potential memory leaks. To fix this, we now wrap the calls to i40e_del_mac_filter() and zeroing vf->default_lan_addr.addr with spin_lock/unlock_bh(&vsi->mac_filter_hash_lock), ensuring atomic operations and preventing concurrent access. Additionally, we add lockdep_assert_held(&vsi->mac_filter_hash_lock) in i40e_add_mac_filter() to help catch similar issues in the future. Reproduction steps: 1. Spawn VFs and configure port vlan on them. 2. Trigger concurrent macvlan operations (e.g., adding and deleting portvlan and/or mac filters). 3. Observe the potential memory leak and inconsistent state in the mac_filter_hash. This synchronization ensures the integrity of the mac_filter_hash and prevents the described leak. |
| CVE-2024-50040 | In the Linux kernel, the following vulnerability has been resolved: igb: Do not bring the device up after non-fatal error Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal") changed igb_io_error_detected() to ignore non-fatal pcie errors in order to avoid hung task that can happen when igb_down() is called multiple times. This caused an issue when processing transient non-fatal errors. igb_io_resume(), which is called after igb_io_error_detected(), assumes that device is brought down by igb_io_error_detected() if the interface is up. This resulted in panic with stacktrace below. [ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down [ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0 [ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000 [ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000 [ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message [ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported. [ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message [ T292] pcieport 0000:00:1c.5: AER: broadcast resume message [ T292] ------------[ cut here ]------------ [ T292] kernel BUG at net/core/dev.c:6539! [ T292] invalid opcode: 0000 [#1] PREEMPT SMP [ T292] RIP: 0010:napi_enable+0x37/0x40 [ T292] Call Trace: [ T292] <TASK> [ T292] ? die+0x33/0x90 [ T292] ? do_trap+0xdc/0x110 [ T292] ? napi_enable+0x37/0x40 [ T292] ? do_error_trap+0x70/0xb0 [ T292] ? napi_enable+0x37/0x40 [ T292] ? napi_enable+0x37/0x40 [ T292] ? exc_invalid_op+0x4e/0x70 [ T292] ? napi_enable+0x37/0x40 [ T292] ? asm_exc_invalid_op+0x16/0x20 [ T292] ? napi_enable+0x37/0x40 [ T292] igb_up+0x41/0x150 [ T292] igb_io_resume+0x25/0x70 [ T292] report_resume+0x54/0x70 [ T292] ? report_frozen_detected+0x20/0x20 [ T292] pci_walk_bus+0x6c/0x90 [ T292] ? aer_print_port_info+0xa0/0xa0 [ T292] pcie_do_recovery+0x22f/0x380 [ T292] aer_process_err_devices+0x110/0x160 [ T292] aer_isr+0x1c1/0x1e0 [ T292] ? disable_irq_nosync+0x10/0x10 [ T292] irq_thread_fn+0x1a/0x60 [ T292] irq_thread+0xe3/0x1a0 [ T292] ? irq_set_affinity_notifier+0x120/0x120 [ T292] ? irq_affinity_notify+0x100/0x100 [ T292] kthread+0xe2/0x110 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork+0x2d/0x50 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork_asm+0x11/0x20 [ T292] </TASK> To fix this issue igb_io_resume() checks if the interface is running and the device is not down this means igb_io_error_detected() did not bring the device down and there is no need to bring it up. |
| CVE-2024-50039 | In the Linux kernel, the following vulnerability has been resolved: net/sched: accept TCA_STAB only for root qdisc Most qdiscs maintain their backlog using qdisc_pkt_len(skb) on the assumption it is invariant between the enqueue() and dequeue() handlers. Unfortunately syzbot can crash a host rather easily using a TBF + SFQ combination, with an STAB on SFQ [1] We can't support TCA_STAB on arbitrary level, this would require to maintain per-qdisc storage. [1] [ 88.796496] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 88.798611] #PF: supervisor read access in kernel mode [ 88.799014] #PF: error_code(0x0000) - not-present page [ 88.799506] PGD 0 P4D 0 [ 88.799829] Oops: Oops: 0000 [#1] SMP NOPTI [ 88.800569] CPU: 14 UID: 0 PID: 2053 Comm: b371744477 Not tainted 6.12.0-rc1-virtme #1117 [ 88.801107] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 88.801779] RIP: 0010:sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.802544] Code: 0f b7 50 12 48 8d 04 d5 00 00 00 00 48 89 d6 48 29 d0 48 8b 91 c0 01 00 00 48 c1 e0 03 48 01 c2 66 83 7a 1a 00 7e c0 48 8b 3a <4c> 8b 07 4c 89 02 49 89 50 08 48 c7 47 08 00 00 00 00 48 c7 07 00 All code ======== 0: 0f b7 50 12 movzwl 0x12(%rax),%edx 4: 48 8d 04 d5 00 00 00 lea 0x0(,%rdx,8),%rax b: 00 c: 48 89 d6 mov %rdx,%rsi f: 48 29 d0 sub %rdx,%rax 12: 48 8b 91 c0 01 00 00 mov 0x1c0(%rcx),%rdx 19: 48 c1 e0 03 shl $0x3,%rax 1d: 48 01 c2 add %rax,%rdx 20: 66 83 7a 1a 00 cmpw $0x0,0x1a(%rdx) 25: 7e c0 jle 0xffffffffffffffe7 27: 48 8b 3a mov (%rdx),%rdi 2a:* 4c 8b 07 mov (%rdi),%r8 <-- trapping instruction 2d: 4c 89 02 mov %r8,(%rdx) 30: 49 89 50 08 mov %rdx,0x8(%r8) 34: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 3b: 00 3c: 48 rex.W 3d: c7 .byte 0xc7 3e: 07 (bad) ... Code starting with the faulting instruction =========================================== 0: 4c 8b 07 mov (%rdi),%r8 3: 4c 89 02 mov %r8,(%rdx) 6: 49 89 50 08 mov %rdx,0x8(%r8) a: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 11: 00 12: 48 rex.W 13: c7 .byte 0xc7 14: 07 (bad) ... [ 88.803721] RSP: 0018:ffff9a1f892b7d58 EFLAGS: 00000206 [ 88.804032] RAX: 0000000000000000 RBX: ffff9a1f8420c800 RCX: ffff9a1f8420c800 [ 88.804560] RDX: ffff9a1f81bc1440 RSI: 0000000000000000 RDI: 0000000000000000 [ 88.805056] RBP: ffffffffc04bb0e0 R08: 0000000000000001 R09: 00000000ff7f9a1f [ 88.805473] R10: 000000000001001b R11: 0000000000009a1f R12: 0000000000000140 [ 88.806194] R13: 0000000000000001 R14: ffff9a1f886df400 R15: ffff9a1f886df4ac [ 88.806734] FS: 00007f445601a740(0000) GS:ffff9a2e7fd80000(0000) knlGS:0000000000000000 [ 88.807225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.807672] CR2: 0000000000000000 CR3: 000000050cc46000 CR4: 00000000000006f0 [ 88.808165] Call Trace: [ 88.808459] <TASK> [ 88.808710] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 88.809261] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 88.809561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 88.809806] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 88.810074] ? sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.810411] sfq_reset (net/sched/sch_sfq.c:525) sch_sfq [ 88.810671] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_g ---truncated--- |
| CVE-2024-50038 | In the Linux kernel, the following vulnerability has been resolved: netfilter: xtables: avoid NFPROTO_UNSPEC where needed syzbot managed to call xt_cluster match via ebtables: WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780 [..] ebt_do_table+0x174b/0x2a40 Module registers to NFPROTO_UNSPEC, but it assumes ipv4/ipv6 packet processing. As this is only useful to restrict locally terminating TCP/UDP traffic, register this for ipv4 and ipv6 family only. Pablo points out that this is a general issue, direct users of the set/getsockopt interface can call into targets/matches that were only intended for use with ip(6)tables. Check all UNSPEC matches and targets for similar issues: - matches and targets are fine except if they assume skb_network_header() is valid -- this is only true when called from inet layer: ip(6) stack pulls the ip/ipv6 header into linear data area. - targets that return XT_CONTINUE or other xtables verdicts must be restricted too, they are incompatbile with the ebtables traverser, e.g. EBT_CONTINUE is a completely different value than XT_CONTINUE. Most matches/targets are changed to register for NFPROTO_IPV4/IPV6, as they are provided for use by ip(6)tables. The MARK target is also used by arptables, so register for NFPROTO_ARP too. While at it, bail out if connbytes fails to enable the corresponding conntrack family. This change passes the selftests in iptables.git. |
| CVE-2024-50037 | In the Linux kernel, the following vulnerability has been resolved: drm/fbdev-dma: Only cleanup deferred I/O if necessary Commit 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if necessary") initializes deferred I/O only if it is used. drm_fbdev_dma_fb_destroy() however calls fb_deferred_io_cleanup() unconditionally with struct fb_info.fbdefio == NULL. KASAN with the out-of-tree Apple silicon display driver posts following warning from __flush_work() of a random struct work_struct instead of the expected NULL pointer derefs. [ 22.053799] ------------[ cut here ]------------ [ 22.054832] WARNING: CPU: 2 PID: 1 at kernel/workqueue.c:4177 __flush_work+0x4d8/0x580 [ 22.056597] Modules linked in: uhid bnep uinput nls_ascii ip6_tables ip_tables i2c_dev loop fuse dm_multipath nfnetlink zram hid_magicmouse btrfs xor xor_neon brcmfmac_wcc raid6_pq hci_bcm4377 bluetooth brcmfmac hid_apple brcmutil nvmem_spmi_mfd simple_mfd_spmi dockchannel_hid cfg80211 joydev regmap_spmi nvme_apple ecdh_generic ecc macsmc_hid rfkill dwc3 appledrm snd_soc_macaudio macsmc_power nvme_core apple_isp phy_apple_atc apple_sart apple_rtkit_helper apple_dockchannel tps6598x macsmc_hwmon snd_soc_cs42l84 videobuf2_v4l2 spmi_apple_controller nvmem_apple_efuses videobuf2_dma_sg apple_z2 videobuf2_memops spi_nor panel_summit videobuf2_common asahi videodev pwm_apple apple_dcp snd_soc_apple_mca apple_admac spi_apple clk_apple_nco i2c_pasemi_platform snd_pcm_dmaengine mc i2c_pasemi_core mux_core ofpart adpdrm drm_dma_helper apple_dart apple_soc_cpufreq leds_pwm phram [ 22.073768] CPU: 2 UID: 0 PID: 1 Comm: systemd-shutdow Not tainted 6.11.2-asahi+ #asahi-dev [ 22.075612] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT) [ 22.077032] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 22.078567] pc : __flush_work+0x4d8/0x580 [ 22.079471] lr : __flush_work+0x54/0x580 [ 22.080345] sp : ffffc000836ef820 [ 22.081089] x29: ffffc000836ef880 x28: 0000000000000000 x27: ffff80002ddb7128 [ 22.082678] x26: dfffc00000000000 x25: 1ffff000096f0c57 x24: ffffc00082d3e358 [ 22.084263] x23: ffff80004b7862b8 x22: dfffc00000000000 x21: ffff80005aa1d470 [ 22.085855] x20: ffff80004b786000 x19: ffff80004b7862a0 x18: 0000000000000000 [ 22.087439] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000005 [ 22.089030] x14: 1ffff800106ddf0a x13: 0000000000000000 x12: 0000000000000000 [ 22.090618] x11: ffffb800106ddf0f x10: dfffc00000000000 x9 : 1ffff800106ddf0e [ 22.092206] x8 : 0000000000000000 x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000001 [ 22.093790] x5 : ffffc000836ef728 x4 : 0000000000000000 x3 : 0000000000000020 [ 22.095368] x2 : 0000000000000008 x1 : 00000000000000aa x0 : 0000000000000000 [ 22.096955] Call trace: [ 22.097505] __flush_work+0x4d8/0x580 [ 22.098330] flush_delayed_work+0x80/0xb8 [ 22.099231] fb_deferred_io_cleanup+0x3c/0x130 [ 22.100217] drm_fbdev_dma_fb_destroy+0x6c/0xe0 [drm_dma_helper] [ 22.101559] unregister_framebuffer+0x210/0x2f0 [ 22.102575] drm_fb_helper_unregister_info+0x48/0x60 [ 22.103683] drm_fbdev_dma_client_unregister+0x4c/0x80 [drm_dma_helper] [ 22.105147] drm_client_dev_unregister+0x1cc/0x230 [ 22.106217] drm_dev_unregister+0x58/0x570 [ 22.107125] apple_drm_unbind+0x50/0x98 [appledrm] [ 22.108199] component_del+0x1f8/0x3a8 [ 22.109042] dcp_platform_shutdown+0x24/0x38 [apple_dcp] [ 22.110357] platform_shutdown+0x70/0x90 [ 22.111219] device_shutdown+0x368/0x4d8 [ 22.112095] kernel_restart+0x6c/0x1d0 [ 22.112946] __arm64_sys_reboot+0x1c8/0x328 [ 22.113868] invoke_syscall+0x78/0x1a8 [ 22.114703] do_el0_svc+0x124/0x1a0 [ 22.115498] el0_svc+0x3c/0xe0 [ 22.116181] el0t_64_sync_handler+0x70/0xc0 [ 22.117110] el0t_64_sync+0x190/0x198 [ 22.117931] ---[ end trace 0000000000000000 ]--- |
| CVE-2024-50036 | In the Linux kernel, the following vulnerability has been resolved: net: do not delay dst_entries_add() in dst_release() dst_entries_add() uses per-cpu data that might be freed at netns dismantle from ip6_route_net_exit() calling dst_entries_destroy() Before ip6_route_net_exit() can be called, we release all the dsts associated with this netns, via calls to dst_release(), which waits an rcu grace period before calling dst_destroy() dst_entries_add() use in dst_destroy() is racy, because dst_entries_destroy() could have been called already. Decrementing the number of dsts must happen sooner. Notes: 1) in CONFIG_XFRM case, dst_destroy() can call dst_release_immediate(child), this might also cause UAF if the child does not have DST_NOCOUNT set. IPSEC maintainers might take a look and see how to address this. 2) There is also discussion about removing this count of dst, which might happen in future kernels. |
| CVE-2024-50035 | In the Linux kernel, the following vulnerability has been resolved: ppp: fix ppp_async_encode() illegal access syzbot reported an issue in ppp_async_encode() [1] In this case, pppoe_sendmsg() is called with a zero size. Then ppp_async_encode() is called with an empty skb. BUG: KMSAN: uninit-value in ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] BUG: KMSAN: uninit-value in ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_send+0x130/0x1b0 drivers/net/ppp/ppp_async.c:634 ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2280 [inline] ppp_input+0x1f1/0xe60 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4092 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4187 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 5411 Comm: syz.1.14 Not tainted 6.12.0-rc1-syzkaller-00165-g360c1f1f24c6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 |
| CVE-2024-50034 | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC Eric report a panic on IPPROTO_SMC, and give the facts that when INET_PROTOSW_ICSK was set, icsk->icsk_sync_mss must be set too. Bug: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000005 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000001195d1000 [0000000000000000] pgd=0800000109c46003, p4d=0800000109c46003, pud=0000000000000000 Internal error: Oops: 0000000086000005 [#1] PREEMPT SMP Modules linked in: CPU: 1 UID: 0 PID: 8037 Comm: syz.3.265 Not tainted 6.11.0-rc7-syzkaller-g5f5673607153 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : cipso_v4_sock_setattr+0x2a8/0x3c0 net/ipv4/cipso_ipv4.c:1910 sp : ffff80009b887a90 x29: ffff80009b887aa0 x28: ffff80008db94050 x27: 0000000000000000 x26: 1fffe0001aa6f5b3 x25: dfff800000000000 x24: ffff0000db75da00 x23: 0000000000000000 x22: ffff0000d8b78518 x21: 0000000000000000 x20: ffff0000d537ad80 x19: ffff0000d8b78000 x18: 1fffe000366d79ee x17: ffff8000800614a8 x16: ffff800080569b84 x15: 0000000000000001 x14: 000000008b336894 x13: 00000000cd96feaa x12: 0000000000000003 x11: 0000000000040000 x10: 00000000000020a3 x9 : 1fffe0001b16f0f1 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000002 x1 : 0000000000000000 x0 : ffff0000d8b78000 Call trace: 0x0 netlbl_sock_setattr+0x2e4/0x338 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa4/0x154 security/smack/smack_lsm.c:2593 smack_socket_post_create+0xa8/0x14c security/smack/smack_lsm.c:2973 security_socket_post_create+0x94/0xd4 security/security.c:4425 __sock_create+0x4c8/0x884 net/socket.c:1587 sock_create net/socket.c:1622 [inline] __sys_socket_create net/socket.c:1659 [inline] __sys_socket+0x134/0x340 net/socket.c:1706 __do_sys_socket net/socket.c:1720 [inline] __se_sys_socket net/socket.c:1718 [inline] __arm64_sys_socket+0x7c/0x94 net/socket.c:1718 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Code: ???????? ???????? ???????? ???????? (????????) ---[ end trace 0000000000000000 ]--- This patch add a toy implementation that performs a simple return to prevent such panic. This is because MSS can be set in sock_create_kern or smc_setsockopt, similar to how it's done in AF_SMC. However, for AF_SMC, there is currently no way to synchronize MSS within __sys_connect_file. This toy implementation lays the groundwork for us to support such feature for IPPROTO_SMC in the future. |
| CVE-2024-50033 | In the Linux kernel, the following vulnerability has been resolved: slip: make slhc_remember() more robust against malicious packets syzbot found that slhc_remember() was missing checks against malicious packets [1]. slhc_remember() only checked the size of the packet was at least 20, which is not good enough. We need to make sure the packet includes the IPv4 and TCP header that are supposed to be carried. Add iph and th pointers to make the code more readable. [1] BUG: KMSAN: uninit-value in slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 ppp_receive_nonmp_frame+0xe45/0x35e0 drivers/net/ppp/ppp_generic.c:2455 ppp_receive_frame drivers/net/ppp/ppp_generic.c:2372 [inline] ppp_do_recv+0x65f/0x40d0 drivers/net/ppp/ppp_generic.c:2212 ppp_input+0x7dc/0xe60 drivers/net/ppp/ppp_generic.c:2327 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 5460 Comm: syz.2.33 Not tainted 6.12.0-rc2-syzkaller-00006-g87d6aab2389e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 |
| CVE-2024-50032 | In the Linux kernel, the following vulnerability has been resolved: rcu/nocb: Fix rcuog wake-up from offline softirq After a CPU has set itself offline and before it eventually calls rcutree_report_cpu_dead(), there are still opportunities for callbacks to be enqueued, for example from a softirq. When that happens on NOCB, the rcuog wake-up is deferred through an IPI to an online CPU in order not to call into the scheduler and risk arming the RT-bandwidth after hrtimers have been migrated out and disabled. But performing a synchronized IPI from a softirq is buggy as reported in the following scenario: WARNING: CPU: 1 PID: 26 at kernel/smp.c:633 smp_call_function_single Modules linked in: rcutorture torture CPU: 1 UID: 0 PID: 26 Comm: migration/1 Not tainted 6.11.0-rc1-00012-g9139f93209d1 #1 Stopper: multi_cpu_stop+0x0/0x320 <- __stop_cpus+0xd0/0x120 RIP: 0010:smp_call_function_single <IRQ> swake_up_one_online __call_rcu_nocb_wake __call_rcu_common ? rcu_torture_one_read call_timer_fn __run_timers run_timer_softirq handle_softirqs irq_exit_rcu ? tick_handle_periodic sysvec_apic_timer_interrupt </IRQ> Fix this with forcing deferred rcuog wake up through the NOCB timer when the CPU is offline. The actual wake up will happen from rcutree_report_cpu_dead(). |
| CVE-2024-50031 | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Stop the active perfmon before being destroyed When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. |
| CVE-2024-50030 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/ct: prevent UAF in send_recv() Ensure we serialize with completion side to prevent UAF with fence going out of scope on the stack, since we have no clue if it will fire after the timeout before we can erase from the xa. Also we have some dependent loads and stores for which we need the correct ordering, and we lack the needed barriers. Fix this by grabbing the ct->lock after the wait, which is also held by the completion side. v2 (Badal): - Also print done after acquiring the lock and seeing timeout. (cherry picked from commit 52789ce35c55ccd30c4b67b9cc5b2af55e0122ea) |
| CVE-2024-50029 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_sync This checks if the ACL connection remains valid as it could be destroyed while hci_enhanced_setup_sync is pending on cmd_sync leading to the following trace: BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0x91b/0xa60 Read of size 1 at addr ffff888002328ffd by task kworker/u5:2/37 CPU: 0 UID: 0 PID: 37 Comm: kworker/u5:2 Not tainted 6.11.0-rc6-01300-g810be445d8d6 #7099 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? hci_enhanced_setup_sync+0x91b/0xa60 print_report+0x152/0x4c0 ? hci_enhanced_setup_sync+0x91b/0xa60 ? __virt_addr_valid+0x1fa/0x420 ? hci_enhanced_setup_sync+0x91b/0xa60 kasan_report+0xda/0x1b0 ? hci_enhanced_setup_sync+0x91b/0xa60 hci_enhanced_setup_sync+0x91b/0xa60 ? __pfx_hci_enhanced_setup_sync+0x10/0x10 ? __pfx___mutex_lock+0x10/0x10 hci_cmd_sync_work+0x1c2/0x330 process_one_work+0x7d9/0x1360 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x167/0x240 worker_thread+0x5b7/0xf60 ? __kthread_parkme+0xac/0x1c0 ? __pfx_worker_thread+0x10/0x10 ? __pfx_worker_thread+0x10/0x10 kthread+0x293/0x360 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 34: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __hci_conn_add+0x187/0x17d0 hci_connect_sco+0x2e1/0xb90 sco_sock_connect+0x2a2/0xb80 __sys_connect+0x227/0x2a0 __x64_sys_connect+0x6d/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 37: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x101/0x160 kfree+0xd0/0x250 device_release+0x9a/0x210 kobject_put+0x151/0x280 hci_conn_del+0x448/0xbf0 hci_abort_conn_sync+0x46f/0x980 hci_cmd_sync_work+0x1c2/0x330 process_one_work+0x7d9/0x1360 worker_thread+0x5b7/0xf60 kthread+0x293/0x360 ret_from_fork+0x2f/0x70 ret_from_fork_asm+0x1a/0x30 |
| CVE-2024-50028 | In the Linux kernel, the following vulnerability has been resolved: thermal: core: Reference count the zone in thermal_zone_get_by_id() There are places in the thermal netlink code where nothing prevents the thermal zone object from going away while being accessed after it has been returned by thermal_zone_get_by_id(). To address this, make thermal_zone_get_by_id() get a reference on the thermal zone device object to be returned with the help of get_device(), under thermal_list_lock, and adjust all of its callers to this change with the help of the cleanup.h infrastructure. |
| CVE-2024-50027 | In the Linux kernel, the following vulnerability has been resolved: thermal: core: Free tzp copy along with the thermal zone The object pointed to by tz->tzp may still be accessed after being freed in thermal_zone_device_unregister(), so move the freeing of it to the point after the removal completion has been completed at which it cannot be accessed any more. |
| CVE-2024-50026 | In the Linux kernel, the following vulnerability has been resolved: scsi: wd33c93: Don't use stale scsi_pointer value A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93: Move the SCSI pointer to private command data") which results in an oops in wd33c93_intr(). That commit added the scsi_pointer variable and initialized it from hostdata->connected. However, during selection, hostdata->connected is not yet valid. Fix this by getting the current scsi_pointer from hostdata->selecting. |
| CVE-2024-50025 | In the Linux kernel, the following vulnerability has been resolved: scsi: fnic: Move flush_work initialization out of if block After commit 379a58caa199 ("scsi: fnic: Move fnic_fnic_flush_tx() to a work queue"), it can happen that a work item is sent to an uninitialized work queue. This may has the effect that the item being queued is never actually queued, and any further actions depending on it will not proceed. The following warning is observed while the fnic driver is loaded: kernel: WARNING: CPU: 11 PID: 0 at ../kernel/workqueue.c:1524 __queue_work+0x373/0x410 kernel: <IRQ> kernel: queue_work_on+0x3a/0x50 kernel: fnic_wq_copy_cmpl_handler+0x54a/0x730 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24] kernel: fnic_isr_msix_wq_copy+0x2d/0x60 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24] kernel: __handle_irq_event_percpu+0x36/0x1a0 kernel: handle_irq_event_percpu+0x30/0x70 kernel: handle_irq_event+0x34/0x60 kernel: handle_edge_irq+0x7e/0x1a0 kernel: __common_interrupt+0x3b/0xb0 kernel: common_interrupt+0x58/0xa0 kernel: </IRQ> It has been observed that this may break the rediscovery of Fibre Channel devices after a temporary fabric failure. This patch fixes it by moving the work queue initialization out of an if block in fnic_probe(). |
| CVE-2024-50024 | In the Linux kernel, the following vulnerability has been resolved: net: Fix an unsafe loop on the list The kernel may crash when deleting a genetlink family if there are still listeners for that family: Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0 LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0 Call Trace: __netlink_clear_multicast_users+0x74/0xc0 genl_unregister_family+0xd4/0x2d0 Change the unsafe loop on the list to a safe one, because inside the loop there is an element removal from this list. |
| CVE-2024-50023 | In the Linux kernel, the following vulnerability has been resolved: net: phy: Remove LED entry from LEDs list on unregister Commit c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct ordering") correctly fixed a problem with using devm_ but missed removing the LED entry from the LEDs list. This cause kernel panic on specific scenario where the port for the PHY is torn down and up and the kmod for the PHY is removed. On setting the port down the first time, the assosiacted LEDs are correctly unregistered. The associated kmod for the PHY is now removed. The kmod is now added again and the port is now put up, the associated LED are registered again. On putting the port down again for the second time after these step, the LED list now have 4 elements. With the first 2 already unregistered previously and the 2 new one registered again. This cause a kernel panic as the first 2 element should have been removed. Fix this by correctly removing the element when LED is unregistered. |
| CVE-2024-50022 | In the Linux kernel, the following vulnerability has been resolved: device-dax: correct pgoff align in dax_set_mapping() pgoff should be aligned using ALIGN_DOWN() instead of ALIGN(). Otherwise, vmf->address not aligned to fault_size will be aligned to the next alignment, that can result in memory failure getting the wrong address. It's a subtle situation that only can be observed in page_mapped_in_vma() after the page is page fault handled by dev_dax_huge_fault. Generally, there is little chance to perform page_mapped_in_vma in dev-dax's page unless in specific error injection to the dax device to trigger an MCE - memory-failure. In that case, page_mapped_in_vma() will be triggered to determine which task is accessing the failure address and kill that task in the end. We used self-developed dax device (which is 2M aligned mapping) , to perform error injection to random address. It turned out that error injected to non-2M-aligned address was causing endless MCE until panic. Because page_mapped_in_vma() kept resulting wrong address and the task accessing the failure address was never killed properly: [ 3783.719419] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3784.049006] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3784.049190] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3784.448042] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3784.448186] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3784.792026] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3784.792179] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3785.162502] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3785.162633] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3785.461116] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3785.461247] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3785.764730] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3785.764859] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3786.042128] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3786.042259] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3786.464293] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3786.464423] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3786.818090] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3786.818217] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3787.085297] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3787.085424] Memory failure: 0x200c9742: recovery action for dax page: Recovered It took us several weeks to pinpoint this problem, but we eventually used bpftrace to trace the page fault and mce address and successfully identified the issue. Joao added: ; Likely we never reproduce in production because we always pin : device-dax regions in the region align they provide (Qemu does : similarly with prealloc in hugetlb/file backed memory). I think this : bug requires that we touch *unpinned* device-dax regions unaligned to : the device-dax selected alignment (page size i.e. 4K/2M/1G) |
| CVE-2024-50021 | In the Linux kernel, the following vulnerability has been resolved: ice: Fix improper handling of refcount in ice_dpll_init_rclk_pins() This patch addresses a reference count handling issue in the ice_dpll_init_rclk_pins() function. The function calls ice_dpll_get_pins(), which increments the reference count of the relevant resources. However, if the condition WARN_ON((!vsi || !vsi->netdev)) is met, the function currently returns an error without properly releasing the resources acquired by ice_dpll_get_pins(), leading to a reference count leak. To resolve this, the check has been moved to the top of the function. This ensures that the function verifies the state before any resources are acquired, avoiding the need for additional resource management in the error path. This bug was identified by an experimental static analysis tool developed by our team. The tool specializes in analyzing reference count operations and detecting potential issues where resources are not properly managed. In this case, the tool flagged the missing release operation as a potential problem, which led to the development of this patch. |
| CVE-2024-50020 | In the Linux kernel, the following vulnerability has been resolved: ice: Fix improper handling of refcount in ice_sriov_set_msix_vec_count() This patch addresses an issue with improper reference count handling in the ice_sriov_set_msix_vec_count() function. First, the function calls ice_get_vf_by_id(), which increments the reference count of the vf pointer. If the subsequent call to ice_get_vf_vsi() fails, the function currently returns an error without decrementing the reference count of the vf pointer, leading to a reference count leak. The correct behavior, as implemented in this patch, is to decrement the reference count using ice_put_vf(vf) before returning an error when vsi is NULL. Second, the function calls ice_sriov_get_irqs(), which sets vf->first_vector_idx. If this call returns a negative value, indicating an error, the function returns an error without decrementing the reference count of the vf pointer, resulting in another reference count leak. The patch addresses this by adding a call to ice_put_vf(vf) before returning an error when vf->first_vector_idx < 0. This bug was identified by an experimental static analysis tool developed by our team. The tool specializes in analyzing reference count operations and identifying potential mismanagement of reference counts. In this case, the tool flagged the missing decrement operation as a potential issue, leading to this patch. |
| CVE-2024-50019 | In the Linux kernel, the following vulnerability has been resolved: kthread: unpark only parked kthread Calling into kthread unparking unconditionally is mostly harmless when the kthread is already unparked. The wake up is then simply ignored because the target is not in TASK_PARKED state. However if the kthread is per CPU, the wake up is preceded by a call to kthread_bind() which expects the task to be inactive and in TASK_PARKED state, which obviously isn't the case if it is unparked. As a result, calling kthread_stop() on an unparked per-cpu kthread triggers such a warning: WARNING: CPU: 0 PID: 11 at kernel/kthread.c:525 __kthread_bind_mask kernel/kthread.c:525 <TASK> kthread_stop+0x17a/0x630 kernel/kthread.c:707 destroy_workqueue+0x136/0xc40 kernel/workqueue.c:5810 wg_destruct+0x1e2/0x2e0 drivers/net/wireguard/device.c:257 netdev_run_todo+0xe1a/0x1000 net/core/dev.c:10693 default_device_exit_batch+0xa14/0xa90 net/core/dev.c:11769 ops_exit_list net/core/net_namespace.c:178 [inline] cleanup_net+0x89d/0xcc0 net/core/net_namespace.c:640 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd70 kernel/workqueue.c:3393 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Fix this with skipping unecessary unparking while stopping a kthread. |
| CVE-2024-50018 | In the Linux kernel, the following vulnerability has been resolved: net: napi: Prevent overflow of napi_defer_hard_irqs In commit 6f8b12d661d0 ("net: napi: add hard irqs deferral feature") napi_defer_irqs was added to net_device and napi_defer_irqs_count was added to napi_struct, both as type int. This value never goes below zero, so there is not reason for it to be a signed int. Change the type for both from int to u32, and add an overflow check to sysfs to limit the value to S32_MAX. The limit of S32_MAX was chosen because the practical limit before this patch was S32_MAX (anything larger was an overflow) and thus there are no behavioral changes introduced. If the extra bit is needed in the future, the limit can be raised. Before this patch: $ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs' $ cat /sys/class/net/eth4/napi_defer_hard_irqs -2147483647 After this patch: $ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs' bash: line 0: echo: write error: Numerical result out of range Similarly, /sys/class/net/XXXXX/tx_queue_len is defined as unsigned: include/linux/netdevice.h: unsigned int tx_queue_len; And has an overflow check: dev_change_tx_queue_len(..., unsigned long new_len): if (new_len != (unsigned int)new_len) return -ERANGE; |
| CVE-2024-50017 | In the Linux kernel, the following vulnerability has been resolved: x86/mm/ident_map: Use gbpages only where full GB page should be mapped. When ident_pud_init() uses only GB pages to create identity maps, large ranges of addresses not actually requested can be included in the resulting table; a 4K request will map a full GB. This can include a lot of extra address space past that requested, including areas marked reserved by the BIOS. That allows processor speculation into reserved regions, that on UV systems can cause system halts. Only use GB pages when map creation requests include the full GB page of space. Fall back to using smaller 2M pages when only portions of a GB page are included in the request. No attempt is made to coalesce mapping requests. If a request requires a map entry at the 2M (pmd) level, subsequent mapping requests within the same 1G region will also be at the pmd level, even if adjacent or overlapping such requests could have been combined to map a full GB page. Existing usage starts with larger regions and then adds smaller regions, so this should not have any great consequence. |
| CVE-2024-50016 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid overflow assignment in link_dp_cts sampling_rate is an uint8_t but is assigned an unsigned int, and thus it can overflow. As a result, sampling_rate is changed to uint32_t. Similarly, LINK_QUAL_PATTERN_SET has a size of 2 bits, and it should only be assigned to a value less or equal than 4. This fixes 2 INTEGER_OVERFLOW issues reported by Coverity. |
| CVE-2024-50015 | In the Linux kernel, the following vulnerability has been resolved: ext4: dax: fix overflowing extents beyond inode size when partially writing The dax_iomap_rw() does two things in each iteration: map written blocks and copy user data to blocks. If the process is killed by user(See signal handling in dax_iomap_iter()), the copied data will be returned and added on inode size, which means that the length of written extents may exceed the inode size, then fsck will fail. An example is given as: dd if=/dev/urandom of=file bs=4M count=1 dax_iomap_rw iomap_iter // round 1 ext4_iomap_begin ext4_iomap_alloc // allocate 0~2M extents(written flag) dax_iomap_iter // copy 2M data iomap_iter // round 2 iomap_iter_advance iter->pos += iter->processed // iter->pos = 2M ext4_iomap_begin ext4_iomap_alloc // allocate 2~4M extents(written flag) dax_iomap_iter fatal_signal_pending done = iter->pos - iocb->ki_pos // done = 2M ext4_handle_inode_extension ext4_update_inode_size // inode size = 2M fsck reports: Inode 13, i_size is 2097152, should be 4194304. Fix? Fix the problem by truncating extents if the written length is smaller than expected. |
| CVE-2024-50014 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix access to uninitialised lock in fc replay path The following kernel trace can be triggered with fstest generic/629 when executed against a filesystem with fast-commit feature enabled: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 PID: 866 Comm: mount Not tainted 6.10.0+ #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x66/0x90 register_lock_class+0x759/0x7d0 __lock_acquire+0x85/0x2630 ? __find_get_block+0xb4/0x380 lock_acquire+0xd1/0x2d0 ? __ext4_journal_get_write_access+0xd5/0x160 _raw_spin_lock+0x33/0x40 ? __ext4_journal_get_write_access+0xd5/0x160 __ext4_journal_get_write_access+0xd5/0x160 ext4_reserve_inode_write+0x61/0xb0 __ext4_mark_inode_dirty+0x79/0x270 ? ext4_ext_replay_set_iblocks+0x2f8/0x450 ext4_ext_replay_set_iblocks+0x330/0x450 ext4_fc_replay+0x14c8/0x1540 ? jread+0x88/0x2e0 ? rcu_is_watching+0x11/0x40 do_one_pass+0x447/0xd00 jbd2_journal_recover+0x139/0x1b0 jbd2_journal_load+0x96/0x390 ext4_load_and_init_journal+0x253/0xd40 ext4_fill_super+0x2cc6/0x3180 ... In the replay path there's an attempt to lock sbi->s_bdev_wb_lock in function ext4_check_bdev_write_error(). Unfortunately, at this point this spinlock has not been initialized yet. Moving it's initialization to an earlier point in __ext4_fill_super() fixes this splat. |
| CVE-2024-50013 | In the Linux kernel, the following vulnerability has been resolved: exfat: fix memory leak in exfat_load_bitmap() If the first directory entry in the root directory is not a bitmap directory entry, 'bh' will not be released and reassigned, which will cause a memory leak. |
| CVE-2024-50012 | In the Linux kernel, the following vulnerability has been resolved: cpufreq: Avoid a bad reference count on CPU node In the parse_perf_domain function, if the call to of_parse_phandle_with_args returns an error, then the reference to the CPU device node that was acquired at the start of the function would not be properly decremented. Address this by declaring the variable with the __free(device_node) cleanup attribute. |
| CVE-2024-50011 | In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item There is no links_num in struct snd_soc_acpi_mach {}, and we test !link->num_adr as a condition to end the loop in hda_sdw_machine_select(). So an empty item in struct snd_soc_acpi_link_adr array is required. |
| CVE-2024-50010 | In the Linux kernel, the following vulnerability has been resolved: exec: don't WARN for racy path_noexec check Both i_mode and noexec checks wrapped in WARN_ON stem from an artifact of the previous implementation. They used to legitimately check for the condition, but that got moved up in two commits: 633fb6ac3980 ("exec: move S_ISREG() check earlier") 0fd338b2d2cd ("exec: move path_noexec() check earlier") Instead of being removed said checks are WARN_ON'ed instead, which has some debug value. However, the spurious path_noexec check is racy, resulting in unwarranted warnings should someone race with setting the noexec flag. One can note there is more to perm-checking whether execve is allowed and none of the conditions are guaranteed to still hold after they were tested for. Additionally this does not validate whether the code path did any perm checking to begin with -- it will pass if the inode happens to be regular. Keep the redundant path_noexec() check even though it's mindless nonsense checking for guarantee that isn't given so drop the WARN. Reword the commentary and do small tidy ups while here. [brauner: keep redundant path_noexec() check] |
| CVE-2024-50009 | In the Linux kernel, the following vulnerability has been resolved: cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it and return in case of error. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-50008 | In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext() Replace one-element array with a flexible-array member in `struct host_cmd_ds_802_11_scan_ext`. With this, fix the following warning: elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------ elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1) elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex] |
| CVE-2024-50007 | In the Linux kernel, the following vulnerability has been resolved: ALSA: asihpi: Fix potential OOB array access ASIHPI driver stores some values in the static array upon a response from the driver, and its index depends on the firmware. We shouldn't trust it blindly. This patch adds a sanity check of the array index to fit in the array size. |
| CVE-2024-50006 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix i_data_sem unlock order in ext4_ind_migrate() Fuzzing reports a possible deadlock in jbd2_log_wait_commit. This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require synchronous updates because the file descriptor is opened with O_SYNC. This can lead to the jbd2_journal_stop() function calling jbd2_might_wait_for_commit(), potentially causing a deadlock if the EXT4_IOC_MIGRATE call races with a write(2) system call. This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the jbd2_journal_stop function while i_data_sem is locked. This triggers lockdep because the jbd2_journal_start function might also lock the same jbd2_handle simultaneously. Found by Linux Verification Center (linuxtesting.org) with syzkaller. Rule: add |
| CVE-2024-50005 | In the Linux kernel, the following vulnerability has been resolved: mac802154: Fix potential RCU dereference issue in mac802154_scan_worker In the `mac802154_scan_worker` function, the `scan_req->type` field was accessed after the RCU read-side critical section was unlocked. According to RCU usage rules, this is illegal and can lead to unpredictable behavior, such as accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the `scan_req->type` value is now stored in a local variable `scan_req_type` while still within the RCU read-side critical section. The `scan_req_type` is then used after the RCU lock is released, ensuring that the type value is safely accessed without violating RCU rules. |
| CVE-2024-50004 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35 [WHY & HOW] Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override to match HW spec. (cherry picked from commit 9dad21f910fcea2bdcff4af46159101d7f9cd8ba) |
| CVE-2024-50003 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix system hang while resume with TBT monitor [Why] Connected with a Thunderbolt monitor and do the suspend and the system may hang while resume. The TBT monitor HPD will be triggered during the resume procedure and call the drm_client_modeset_probe() while struct drm_connector connector->dev->master is NULL. It will mess up the pipe topology after resume. [How] Skip the TBT monitor HPD during the resume procedure because we currently will probe the connectors after resume by default. (cherry picked from commit 453f86a26945207a16b8f66aaed5962dc2b95b85) |
| CVE-2024-50002 | In the Linux kernel, the following vulnerability has been resolved: static_call: Handle module init failure correctly in static_call_del_module() Module insertion invokes static_call_add_module() to initialize the static calls in a module. static_call_add_module() invokes __static_call_init(), which allocates a struct static_call_mod to either encapsulate the built-in static call sites of the associated key into it so further modules can be added or to append the module to the module chain. If that allocation fails the function returns with an error code and the module core invokes static_call_del_module() to clean up eventually added static_call_mod entries. This works correctly, when all keys used by the module were converted over to a module chain before the failure. If not then static_call_del_module() causes a #GP as it blindly assumes that key::mods points to a valid struct static_call_mod. The problem is that key::mods is not a individual struct member of struct static_call_key, it's part of a union to save space: union { /* bit 0: 0 = mods, 1 = sites */ unsigned long type; struct static_call_mod *mods; struct static_call_site *sites; }; key::sites is a pointer to the list of built-in usage sites of the static call. The type of the pointer is differentiated by bit 0. A mods pointer has the bit clear, the sites pointer has the bit set. As static_call_del_module() blidly assumes that the pointer is a valid static_call_mod type, it fails to check for this failure case and dereferences the pointer to the list of built-in call sites, which is obviously bogus. Cure it by checking whether the key has a sites or a mods pointer. If it's a sites pointer then the key is not to be touched. As the sites are walked in the same order as in __static_call_init() the site walk can be terminated because all subsequent sites have not been touched by the init code due to the error exit. If it was converted before the allocation fail, then the inner loop which searches for a module match will find nothing. A fail in the second allocation in __static_call_init() is harmless and does not require special treatment. The first allocation succeeded and converted the key to a module chain. That first entry has mod::mod == NULL and mod::next == NULL, so the inner loop of static_call_del_module() will neither find a module match nor a module chain. The next site in the walk was either already converted, but can't match the module, or it will exit the outer loop because it has a static_call_site pointer and not a static_call_mod pointer. |
| CVE-2024-50001 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix error path in multi-packet WQE transmit Remove the erroneous unmap in case no DMA mapping was established The multi-packet WQE transmit code attempts to obtain a DMA mapping for the skb. This could fail, e.g. under memory pressure, when the IOMMU driver just can't allocate more memory for page tables. While the code tries to handle this in the path below the err_unmap label it erroneously unmaps one entry from the sq's FIFO list of active mappings. Since the current map attempt failed this unmap is removing some random DMA mapping that might still be required. If the PCI function now presents that IOVA, the IOMMU may assumes a rogue DMA access and e.g. on s390 puts the PCI function in error state. The erroneous behavior was seen in a stress-test environment that created memory pressure. |
| CVE-2024-50000 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix NULL deref in mlx5e_tir_builder_alloc() In mlx5e_tir_builder_alloc() kvzalloc() may return NULL which is dereferenced on the next line in a reference to the modify field. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-49999 | In the Linux kernel, the following vulnerability has been resolved: afs: Fix the setting of the server responding flag In afs_wait_for_operation(), we set transcribe the call responded flag to the server record that we used after doing the fileserver iteration loop - but it's possible to exit the loop having had a response from the server that we've discarded (e.g. it returned an abort or we started receiving data, but the call didn't complete). This means that op->server might be NULL, but we don't check that before attempting to set the server flag. |
| CVE-2024-49998 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: improve shutdown sequence Alexander Sverdlin presents 2 problems during shutdown with the lan9303 driver. One is specific to lan9303 and the other just happens to reproduce there. The first problem is that lan9303 is unique among DSA drivers in that it calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown, not remove): phy_state_machine() -> ... -> dsa_user_phy_read() -> ds->ops->phy_read() -> lan9303_phy_read() -> chip->ops->phy_read() -> lan9303_mdio_phy_read() -> dev_get_drvdata() But we never stop the phy_state_machine(), so it may continue to run after dsa_switch_shutdown(). Our common pattern in all DSA drivers is to set drvdata to NULL to suppress the remove() method that may come afterwards. But in this case it will result in an NPD. The second problem is that the way in which we set dp->conduit->dsa_ptr = NULL; is concurrent with receive packet processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL, but afterwards, rather than continuing to use that non-NULL value, dev->dsa_ptr is dereferenced again and again without NULL checks: dsa_conduit_find_user() and many other places. In between dereferences, there is no locking to ensure that what was valid once continues to be valid. Both problems have the common aspect that closing the conduit interface solves them. In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN event in dsa_user_netdevice_event() which closes user ports as well. dsa_port_disable_rt() calls phylink_stop(), which synchronously stops the phylink state machine, and ds->ops->phy_read() will thus no longer call into the driver after this point. In the second case, dev_close(conduit) should do this, as per Documentation/networking/driver.rst: | Quiescence | ---------- | | After the ndo_stop routine has been called, the hardware must | not receive or transmit any data. All in flight packets must | be aborted. If necessary, poll or wait for completion of | any reset commands. So it should be sufficient to ensure that later, when we zeroize conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call on this conduit. The addition of the netif_device_detach() function is to ensure that ioctls, rtnetlinks and ethtool requests on the user ports no longer propagate down to the driver - we're no longer prepared to handle them. The race condition actually did not exist when commit 0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown") first introduced dsa_switch_shutdown(). It was created later, when we stopped unregistering the user interfaces from a bad spot, and we just replaced that sequence with a racy zeroization of conduit->dsa_ptr (one which doesn't ensure that the interfaces aren't up). |
| CVE-2024-49997 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: lantiq_etop: fix memory disclosure When applying padding, the buffer is not zeroed, which results in memory disclosure. The mentioned data is observed on the wire. This patch uses skb_put_padto() to pad Ethernet frames properly. The mentioned function zeroes the expanded buffer. In case the packet cannot be padded it is silently dropped. Statistics are also not incremented. This driver does not support statistics in the old 32-bit format or the new 64-bit format. These will be added in the future. In its current form, the patch should be easily backported to stable versions. Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets in hardware, so software padding must be applied. |
| CVE-2024-49996 | In the Linux kernel, the following vulnerability has been resolved: cifs: Fix buffer overflow when parsing NFS reparse points ReparseDataLength is sum of the InodeType size and DataBuffer size. So to get DataBuffer size it is needed to subtract InodeType's size from ReparseDataLength. Function cifs_strndup_from_utf16() is currentlly accessing buf->DataBuffer at position after the end of the buffer because it does not subtract InodeType size from the length. Fix this problem and correctly subtract variable len. Member InodeType is present only when reparse buffer is large enough. Check for ReparseDataLength before accessing InodeType to prevent another invalid memory access. Major and minor rdev values are present also only when reparse buffer is large enough. Check for reparse buffer size before calling reparse_mkdev(). |
| CVE-2024-49995 | In the Linux kernel, the following vulnerability has been resolved: tipc: guard against string buffer overrun Smatch reports that copying media_name and if_name to name_parts may overwrite the destination. .../bearer.c:166 bearer_name_validate() error: strcpy() 'media_name' too large for 'name_parts->media_name' (32 vs 16) .../bearer.c:167 bearer_name_validate() error: strcpy() 'if_name' too large for 'name_parts->if_name' (1010102 vs 16) This does seem to be the case so guard against this possibility by using strscpy() and failing if truncation occurs. Introduced by commit b97bf3fd8f6a ("[TIPC] Initial merge") Compile tested only. |
| CVE-2024-49994 | In the Linux kernel, the following vulnerability has been resolved: block: fix integer overflow in BLKSECDISCARD I independently rediscovered commit 22d24a544b0d49bbcbd61c8c0eaf77d3c9297155 block: fix overflow in blk_ioctl_discard() but for secure erase. Same problem: uint64_t r[2] = {512, 18446744073709551104ULL}; ioctl(fd, BLKSECDISCARD, r); will enter near infinite loop inside blkdev_issue_secure_erase(): a.out: attempt to access beyond end of device loop0: rw=5, sector=3399043073, nr_sectors = 1024 limit=2048 bio_check_eod: 3286214 callbacks suppressed |
| CVE-2024-49993 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix potential lockup if qi_submit_sync called with 0 count If qi_submit_sync() is invoked with 0 invalidation descriptors (for instance, for DMA draining purposes), we can run into a bug where a submitting thread fails to detect the completion of invalidation_wait. Subsequently, this led to a soft lockup. Currently, there is no impact by this bug on the existing users because no callers are submitting invalidations with 0 descriptors. This fix will enable future users (such as DMA drain) calling qi_submit_sync() with 0 count. Suppose thread T1 invokes qi_submit_sync() with non-zero descriptors, while concurrently, thread T2 calls qi_submit_sync() with zero descriptors. Both threads then enter a while loop, waiting for their respective descriptors to complete. T1 detects its completion (i.e., T1's invalidation_wait status changes to QI_DONE by HW) and proceeds to call reclaim_free_desc() to reclaim all descriptors, potentially including adjacent ones of other threads that are also marked as QI_DONE. During this time, while T2 is waiting to acquire the qi->q_lock, the IOMMU hardware may complete the invalidation for T2, setting its status to QI_DONE. However, if T1's execution of reclaim_free_desc() frees T2's invalidation_wait descriptor and changes its status to QI_FREE, T2 will not observe the QI_DONE status for its invalidation_wait and will indefinitely remain stuck. This soft lockup does not occur when only non-zero descriptors are submitted.In such cases, invalidation descriptors are interspersed among wait descriptors with the status QI_IN_USE, acting as barriers. These barriers prevent the reclaim code from mistakenly freeing descriptors belonging to other submitters. Considered the following example timeline: T1 T2 ======================================== ID1 WD1 while(WD1!=QI_DONE) unlock lock WD1=QI_DONE* WD2 while(WD2!=QI_DONE) unlock lock WD1==QI_DONE? ID1=QI_DONE WD2=DONE* reclaim() ID1=FREE WD1=FREE WD2=FREE unlock soft lockup! T2 never sees QI_DONE in WD2 Where: ID = invalidation descriptor WD = wait descriptor * Written by hardware The root of the problem is that the descriptor status QI_DONE flag is used for two conflicting purposes: 1. signal a descriptor is ready for reclaim (to be freed) 2. signal by the hardware that a wait descriptor is complete The solution (in this patch) is state separation by using QI_FREE flag for #1. Once a thread's invalidation descriptors are complete, their status would be set to QI_FREE. The reclaim_free_desc() function would then only free descriptors marked as QI_FREE instead of those marked as QI_DONE. This change ensures that T2 (from the previous example) will correctly observe the completion of its invalidation_wait (marked as QI_DONE). |
| CVE-2024-49992 | In the Linux kernel, the following vulnerability has been resolved: drm/stm: Avoid use-after-free issues with crtc and plane ltdc_load() calls functions drm_crtc_init_with_planes(), drm_universal_plane_init() and drm_encoder_init(). These functions should not be called with parameters allocated with devm_kzalloc() to avoid use-after-free issues [1]. Use allocations managed by the DRM framework. Found by Linux Verification Center (linuxtesting.org). [1] https://lore.kernel.org/lkml/u366i76e3qhh3ra5oxrtngjtm2u5lterkekcz6y2jkndhuxzli@diujon4h7qwb/ |
| CVE-2024-49991 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: amdkfd_free_gtt_mem clear the correct pointer Pass pointer reference to amdgpu_bo_unref to clear the correct pointer, otherwise amdgpu_bo_unref clear the local variable, the original pointer not set to NULL, this could cause use-after-free bug. |
| CVE-2024-49990 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/hdcp: Check GSC structure validity Sometimes xe_gsc is not initialized when checked at HDCP capability check. Add gsc structure check to avoid null pointer error. |
| CVE-2024-49989 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix double free issue during amdgpu module unload Flexible endpoints use DIGs from available inflexible endpoints, so only the encoders of inflexible links need to be freed. Otherwise, a double free issue may occur when unloading the amdgpu module. [ 279.190523] RIP: 0010:__slab_free+0x152/0x2f0 [ 279.190577] Call Trace: [ 279.190580] <TASK> [ 279.190582] ? show_regs+0x69/0x80 [ 279.190590] ? die+0x3b/0x90 [ 279.190595] ? do_trap+0xc8/0xe0 [ 279.190601] ? do_error_trap+0x73/0xa0 [ 279.190605] ? __slab_free+0x152/0x2f0 [ 279.190609] ? exc_invalid_op+0x56/0x70 [ 279.190616] ? __slab_free+0x152/0x2f0 [ 279.190642] ? asm_exc_invalid_op+0x1f/0x30 [ 279.190648] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191096] ? __slab_free+0x152/0x2f0 [ 279.191102] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191469] kfree+0x260/0x2b0 [ 279.191474] dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191821] link_destroy+0xd7/0x130 [amdgpu] [ 279.192248] dc_destruct+0x90/0x270 [amdgpu] [ 279.192666] dc_destroy+0x19/0x40 [amdgpu] [ 279.193020] amdgpu_dm_fini+0x16e/0x200 [amdgpu] [ 279.193432] dm_hw_fini+0x26/0x40 [amdgpu] [ 279.193795] amdgpu_device_fini_hw+0x24c/0x400 [amdgpu] [ 279.194108] amdgpu_driver_unload_kms+0x4f/0x70 [amdgpu] [ 279.194436] amdgpu_pci_remove+0x40/0x80 [amdgpu] [ 279.194632] pci_device_remove+0x3a/0xa0 [ 279.194638] device_remove+0x40/0x70 [ 279.194642] device_release_driver_internal+0x1ad/0x210 [ 279.194647] driver_detach+0x4e/0xa0 [ 279.194650] bus_remove_driver+0x6f/0xf0 [ 279.194653] driver_unregister+0x33/0x60 [ 279.194657] pci_unregister_driver+0x44/0x90 [ 279.194662] amdgpu_exit+0x19/0x1f0 [amdgpu] [ 279.194939] __do_sys_delete_module.isra.0+0x198/0x2f0 [ 279.194946] __x64_sys_delete_module+0x16/0x20 [ 279.194950] do_syscall_64+0x58/0x120 [ 279.194954] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 279.194980] </TASK> |
| CVE-2024-49988 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: add refcnt to ksmbd_conn struct When sending an oplock break request, opinfo->conn is used, But freed ->conn can be used on multichannel. This patch add a reference count to the ksmbd_conn struct so that it can be freed when it is no longer used. |
| CVE-2024-49987 | In the Linux kernel, the following vulnerability has been resolved: bpftool: Fix undefined behavior in qsort(NULL, 0, ...) When netfilter has no entry to display, qsort is called with qsort(NULL, 0, ...). This results in undefined behavior, as UBSan reports: net.c:827:2: runtime error: null pointer passed as argument 1, which is declared to never be null Although the C standard does not explicitly state whether calling qsort with a NULL pointer when the size is 0 constitutes undefined behavior, Section 7.1.4 of the C standard (Use of library functions) mentions: "Each of the following statements applies unless explicitly stated otherwise in the detailed descriptions that follow: If an argument to a function has an invalid value (such as a value outside the domain of the function, or a pointer outside the address space of the program, or a null pointer, or a pointer to non-modifiable storage when the corresponding parameter is not const-qualified) or a type (after promotion) not expected by a function with variable number of arguments, the behavior is undefined." To avoid this, add an early return when nf_link_info is NULL to prevent calling qsort with a NULL pointer. |
| CVE-2024-49986 | In the Linux kernel, the following vulnerability has been resolved: platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors x86_android_tablet_remove() frees the pdevs[] array, so it should not be used after calling x86_android_tablet_remove(). When platform_device_register() fails, store the pdevs[x] PTR_ERR() value into the local ret variable before calling x86_android_tablet_remove() to avoid using pdevs[] after it has been freed. |
| CVE-2024-49985 | In the Linux kernel, the following vulnerability has been resolved: i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume In case there is any sort of clock controller attached to this I2C bus controller, for example Versaclock or even an AIC32x4 I2C codec, then an I2C transfer triggered from the clock controller clk_ops .prepare callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex. This is because the clock controller first grabs the prepare_lock mutex and then performs the prepare operation, including its I2C access. The I2C access resumes this I2C bus controller via .runtime_resume callback, which calls clk_prepare_enable(), which attempts to grab the prepare_lock mutex again and deadlocks. Since the clock are already prepared since probe() and unprepared in remove(), use simple clk_enable()/clk_disable() calls to enable and disable the clock on runtime suspend and resume, to avoid hitting the prepare_lock mutex. |
| CVE-2024-49984 | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Prevent out of bounds access in performance query extensions Check that the number of perfmons userspace is passing in the copy and reset extensions is not greater than the internal kernel storage where the ids will be copied into. |
| CVE-2024-49983 | In the Linux kernel, the following vulnerability has been resolved: ext4: drop ppath from ext4_ext_replay_update_ex() to avoid double-free When calling ext4_force_split_extent_at() in ext4_ext_replay_update_ex(), the 'ppath' is updated but it is the 'path' that is freed, thus potentially triggering a double-free in the following process: ext4_ext_replay_update_ex ppath = path ext4_force_split_extent_at(&ppath) ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf ext4_ext_grow_indepth ext4_find_extent if (depth > path[0].p_maxdepth) kfree(path) ---> path First freed *orig_path = path = NULL ---> null ppath kfree(path) ---> path double-free !!! So drop the unnecessary ppath and use path directly to avoid this problem. And use ext4_find_extent() directly to update path, avoiding unnecessary memory allocation and freeing. Also, propagate the error returned by ext4_find_extent() instead of using strange error codes. |
| CVE-2024-49982 | In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in more places For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put() instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs into use-after-free. Then Nicolai Stange found more places in aoe have potential use-after-free problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe() and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push packet to tx queue. So they should also use dev_hold() to increase the refcnt of skb->dev. On the other hand, moving dev_put() to tx() causes that the refcnt of skb->dev be reduced to a negative value, because corresponding dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(), probe(), and aoecmd_cfg_rsp(). This patch fixed this issue. |
| CVE-2024-49981 | In the Linux kernel, the following vulnerability has been resolved: media: venus: fix use after free bug in venus_remove due to race condition in venus_probe, core->work is bound with venus_sys_error_handler, which is used to handle error. The code use core->sys_err_done to make sync work. The core->work is started in venus_event_notify. If we call venus_remove, there might be an unfished work. The possible sequence is as follows: CPU0 CPU1 |venus_sys_error_handler venus_remove | hfi_destroy | venus_hfi_destroy | kfree(hdev); | |hfi_reinit |venus_hfi_queues_reinit |//use hdev Fix it by canceling the work in venus_remove. |
| CVE-2024-49980 | In the Linux kernel, the following vulnerability has been resolved: vrf: revert "vrf: Remove unnecessary RCU-bh critical section" This reverts commit 504fc6f4f7f681d2a03aa5f68aad549d90eab853. dev_queue_xmit_nit is expected to be called with BH disabled. __dev_queue_xmit has the following: /* Disable soft irqs for various locks below. Also * stops preemption for RCU. */ rcu_read_lock_bh(); VRF must follow this invariant. The referenced commit removed this protection. Which triggered a lockdep warning: ================================ WARNING: inconsistent lock state 6.11.0 #1 Tainted: G W -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. btserver/134819 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff8882da30c118 (rlock-AF_PACKET){+.?.}-{2:2}, at: tpacket_rcv+0x863/0x3b30 {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x19a/0x4f0 _raw_spin_lock+0x27/0x40 packet_rcv+0xa33/0x1320 __netif_receive_skb_core.constprop.0+0xcb0/0x3a90 __netif_receive_skb_list_core+0x2c9/0x890 netif_receive_skb_list_internal+0x610/0xcc0 [...] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rlock-AF_PACKET); <Interrupt> lock(rlock-AF_PACKET); *** DEADLOCK *** Call Trace: <TASK> dump_stack_lvl+0x73/0xa0 mark_lock+0x102e/0x16b0 __lock_acquire+0x9ae/0x6170 lock_acquire+0x19a/0x4f0 _raw_spin_lock+0x27/0x40 tpacket_rcv+0x863/0x3b30 dev_queue_xmit_nit+0x709/0xa40 vrf_finish_direct+0x26e/0x340 [vrf] vrf_l3_out+0x5f4/0xe80 [vrf] __ip_local_out+0x51e/0x7a0 [...] |
| CVE-2024-49979 | In the Linux kernel, the following vulnerability has been resolved: net: gso: fix tcp fraglist segmentation after pull from frag_list Detect tcp gso fraglist skbs with corrupted geometry (see below) and pass these to skb_segment instead of skb_segment_list, as the first can segment them correctly. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify these skbs, breaking these invariants. In extreme cases they pull all data into skb linear. For TCP, this causes a NULL ptr deref in __tcpv4_gso_segment_list_csum at tcp_hdr(seg->next). Detect invalid geometry due to pull, by checking head_skb size. Don't just drop, as this may blackhole a destination. Convert to be able to pass to regular skb_segment. Approach and description based on a patch by Willem de Bruijn. |
| CVE-2024-49978 | In the Linux kernel, the following vulnerability has been resolved: gso: fix udp gso fraglist segmentation after pull from frag_list Detect gso fraglist skbs with corrupted geometry (see below) and pass these to skb_segment instead of skb_segment_list, as the first can segment them correctly. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify these skbs, breaking these invariants. In extreme cases they pull all data into skb linear. For UDP, this causes a NULL ptr deref in __udpv4_gso_segment_list_csum at udp_hdr(seg->next)->dest. Detect invalid geometry due to pull, by checking head_skb size. Don't just drop, as this may blackhole a destination. Convert to be able to pass to regular skb_segment. |
| CVE-2024-49977 | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Fix zero-division error when disabling tc cbs The commit b8c43360f6e4 ("net: stmmac: No need to calculate speed divider when offload is disabled") allows the "port_transmit_rate_kbps" to be set to a value of 0, which is then passed to the "div_s64" function when tc-cbs is disabled. This leads to a zero-division error. When tc-cbs is disabled, the idleslope, sendslope, and credit values the credit values are not required to be configured. Therefore, adding a return statement after setting the txQ mode to DCB when tc-cbs is disabled would prevent a zero-division error. |
| CVE-2024-49976 | In the Linux kernel, the following vulnerability has been resolved: tracing/timerlat: Drop interface_lock in stop_kthread() stop_kthread() is the offline callback for "trace/osnoise:online", since commit 5bfbcd1ee57b ("tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread()"), the following ABBA deadlock scenario is introduced: T1 | T2 [BP] | T3 [AP] osnoise_hotplug_workfn() | work_for_cpu_fn() | cpuhp_thread_fun() | _cpu_down() | osnoise_cpu_die() mutex_lock(&interface_lock) | | stop_kthread() | cpus_write_lock() | mutex_lock(&interface_lock) cpus_read_lock() | cpuhp_kick_ap() | As the interface_lock here in just for protecting the "kthread" field of the osn_var, use xchg() instead to fix this issue. Also use for_each_online_cpu() back in stop_per_cpu_kthreads() as it can take cpu_read_lock() again. |
| CVE-2024-49975 | In the Linux kernel, the following vulnerability has been resolved: uprobes: fix kernel info leak via "[uprobes]" vma xol_add_vma() maps the uninitialized page allocated by __create_xol_area() into userspace. On some architectures (x86) this memory is readable even without VM_READ, VM_EXEC results in the same pgprot_t as VM_EXEC|VM_READ, although this doesn't really matter, debugger can read this memory anyway. |
| CVE-2024-49974 | In the Linux kernel, the following vulnerability has been resolved: NFSD: Limit the number of concurrent async COPY operations Nothing appears to limit the number of concurrent async COPY operations that clients can start. In addition, AFAICT each async COPY can copy an unlimited number of 4MB chunks, so can run for a long time. Thus IMO async COPY can become a DoS vector. Add a restriction mechanism that bounds the number of concurrent background COPY operations. Start simple and try to be fair -- this patch implements a per-namespace limit. An async COPY request that occurs while this limit is exceeded gets NFS4ERR_DELAY. The requesting client can choose to send the request again after a delay or fall back to a traditional read/write style copy. If there is need to make the mechanism more sophisticated, we can visit that in future patches. |
| CVE-2024-49973 | In the Linux kernel, the following vulnerability has been resolved: r8169: add tally counter fields added with RTL8125 RTL8125 added fields to the tally counter, what may result in the chip dma'ing these new fields to unallocated memory. Therefore make sure that the allocated memory area is big enough to hold all of the tally counter values, even if we use only parts of it. |
| CVE-2024-49972 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Deallocate DML memory if allocation fails [Why] When DC state create DML memory allocation fails, memory is not deallocated subsequently, resulting in uninitialized structure that is not NULL. [How] Deallocate memory if DML memory allocation fails. |
| CVE-2024-49971 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Increase array size of dummy_boolean [WHY] dml2_core_shared_mode_support and dml_core_mode_support access the third element of dummy_boolean, i.e. hw_debug5 = &s->dummy_boolean[2], when dummy_boolean has size of 2. Any assignment to hw_debug5 causes an OVERRUN. [HOW] Increase dummy_boolean's array size to 3. This fixes 2 OVERRUN issues reported by Coverity. |
| CVE-2024-49970 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Implement bounds check for stream encoder creation in DCN401 'stream_enc_regs' array is an array of dcn10_stream_enc_registers structures. The array is initialized with four elements, corresponding to the four calls to stream_enc_regs() in the array initializer. This means that valid indices for this array are 0, 1, 2, and 3. The error message 'stream_enc_regs' 4 <= 5 below, is indicating that there is an attempt to access this array with an index of 5, which is out of bounds. This could lead to undefined behavior Here, eng_id is used as an index to access the stream_enc_regs array. If eng_id is 5, this would result in an out-of-bounds access on the stream_enc_regs array. Thus fixing Buffer overflow error in dcn401_stream_encoder_create Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c:1209 dcn401_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5 |
| CVE-2024-49969 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in DCN30 color transformation This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max |
| CVE-2024-49968 | In the Linux kernel, the following vulnerability has been resolved: ext4: filesystems without casefold feature cannot be mounted with siphash When mounting the ext4 filesystem, if the default hash version is set to DX_HASH_SIPHASH but the casefold feature is not set, exit the mounting. |
| CVE-2024-49967 | In the Linux kernel, the following vulnerability has been resolved: ext4: no need to continue when the number of entries is 1 |
| CVE-2024-49966 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: cancel dqi_sync_work before freeing oinfo ocfs2_global_read_info() will initialize and schedule dqi_sync_work at the end, if error occurs after successfully reading global quota, it will trigger the following warning with CONFIG_DEBUG_OBJECTS_* enabled: ODEBUG: free active (active state 0) object: 00000000d8b0ce28 object type: timer_list hint: qsync_work_fn+0x0/0x16c This reports that there is an active delayed work when freeing oinfo in error handling, so cancel dqi_sync_work first. BTW, return status instead of -1 when .read_file_info fails. |
| CVE-2024-49965 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: remove unreasonable unlock in ocfs2_read_blocks Patch series "Misc fixes for ocfs2_read_blocks", v5. This series contains 2 fixes for ocfs2_read_blocks(). The first patch fix the issue reported by syzbot, which detects bad unlock balance in ocfs2_read_blocks(). The second patch fixes an issue reported by Heming Zhao when reviewing above fix. This patch (of 2): There was a lock release before exiting, so remove the unreasonable unlock. |
| CVE-2024-49964 | In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix memfd_pin_folios free_huge_pages leak memfd_pin_folios followed by unpin_folios fails to restore free_huge_pages if the pages were not already faulted in, because the folio refcount for pages created by memfd_alloc_folio never goes to 0. memfd_pin_folios needs another folio_put to undo the folio_try_get below: memfd_alloc_folio() alloc_hugetlb_folio_nodemask() dequeue_hugetlb_folio_nodemask() dequeue_hugetlb_folio_node_exact() folio_ref_unfreeze(folio, 1); ; adds 1 refcount folio_try_get() ; adds 1 refcount hugetlb_add_to_page_cache() ; adds 512 refcount (on x86) With the fix, after memfd_pin_folios + unpin_folios, the refcount for the (unfaulted) page is 512, which is correct, as the refcount for a faulted unpinned page is 513. |
| CVE-2024-49963 | In the Linux kernel, the following vulnerability has been resolved: mailbox: bcm2835: Fix timeout during suspend mode During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs |
| CVE-2024-49962 | In the Linux kernel, the following vulnerability has been resolved: ACPICA: check null return of ACPI_ALLOCATE_ZEROED() in acpi_db_convert_to_package() ACPICA commit 4d4547cf13cca820ff7e0f859ba83e1a610b9fd0 ACPI_ALLOCATE_ZEROED() may fail, elements might be NULL and will cause NULL pointer dereference later. [ rjw: Subject and changelog edits ] |
| CVE-2024-49961 | In the Linux kernel, the following vulnerability has been resolved: media: i2c: ar0521: Use cansleep version of gpiod_set_value() If we use GPIO reset from I2C port expander, we must use *_cansleep() variant of GPIO functions. This was not done in ar0521_power_on()/ar0521_power_off() functions. Let's fix that. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x74/0x7c Modules linked in: CPU: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.10.0 #53 Hardware name: Diasom DS-RK3568-SOM-EVB (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : gpiod_set_value+0x74/0x7c lr : ar0521_power_on+0xcc/0x290 sp : ffffff8001d7ab70 x29: ffffff8001d7ab70 x28: ffffff80027dcc90 x27: ffffff8003c82000 x26: ffffff8003ca9250 x25: ffffffc080a39c60 x24: ffffff8003ca9088 x23: ffffff8002402720 x22: ffffff8003ca9080 x21: ffffff8003ca9088 x20: 0000000000000000 x19: ffffff8001eb2a00 x18: ffffff80efeeac80 x17: 756d2d6332692f30 x16: 0000000000000000 x15: 0000000000000000 x14: ffffff8001d91d40 x13: 0000000000000016 x12: ffffffc080e98930 x11: ffffff8001eb2880 x10: 0000000000000890 x9 : ffffff8001d7a9f0 x8 : ffffff8001d92570 x7 : ffffff80efeeac80 x6 : 000000003fc6e780 x5 : ffffff8001d91c80 x4 : 0000000000000002 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: gpiod_set_value+0x74/0x7c ar0521_power_on+0xcc/0x290 ... |
| CVE-2024-49960 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix timer use-after-free on failed mount Syzbot has found an ODEBUG bug in ext4_fill_super The del_timer_sync function cancels the s_err_report timer, which reminds about filesystem errors daily. We should guarantee the timer is no longer active before kfree(sbi). When filesystem mounting fails, the flow goes to failed_mount3, where an error occurs when ext4_stop_mmpd is called, causing a read I/O failure. This triggers the ext4_handle_error function that ultimately re-arms the timer, leaving the s_err_report timer active before kfree(sbi) is called. Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd. |
| CVE-2024-49959 | In the Linux kernel, the following vulnerability has been resolved: jbd2: stop waiting for space when jbd2_cleanup_journal_tail() returns error In __jbd2_log_wait_for_space(), we might call jbd2_cleanup_journal_tail() to recover some journal space. But if an error occurs while executing jbd2_cleanup_journal_tail() (e.g., an EIO), we don't stop waiting for free space right away, we try other branches, and if j_committing_transaction is NULL (i.e., the tid is 0), we will get the following complain: ============================================ JBD2: I/O error when updating journal superblock for sdd-8. __jbd2_log_wait_for_space: needed 256 blocks and only had 217 space available __jbd2_log_wait_for_space: no way to get more journal space in sdd-8 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 139804 at fs/jbd2/checkpoint.c:109 __jbd2_log_wait_for_space+0x251/0x2e0 Modules linked in: CPU: 2 PID: 139804 Comm: kworker/u8:3 Not tainted 6.6.0+ #1 RIP: 0010:__jbd2_log_wait_for_space+0x251/0x2e0 Call Trace: <TASK> add_transaction_credits+0x5d1/0x5e0 start_this_handle+0x1ef/0x6a0 jbd2__journal_start+0x18b/0x340 ext4_dirty_inode+0x5d/0xb0 __mark_inode_dirty+0xe4/0x5d0 generic_update_time+0x60/0x70 [...] ============================================ So only if jbd2_cleanup_journal_tail() returns 1, i.e., there is nothing to clean up at the moment, continue to try to reclaim free space in other ways. Note that this fix relies on commit 6f6a6fda2945 ("jbd2: fix ocfs2 corrupt when updating journal superblock fails") to make jbd2_cleanup_journal_tail return the correct error code. |
| CVE-2024-49958 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: reserve space for inline xattr before attaching reflink tree One of our customers reported a crash and a corrupted ocfs2 filesystem. The crash was due to the detection of corruption. Upon troubleshooting, the fsck -fn output showed the below corruption [EXTENT_LIST_FREE] Extent list in owner 33080590 claims 230 as the next free chain record, but fsck believes the largest valid value is 227. Clamp the next record value? n The stat output from the debugfs.ocfs2 showed the following corruption where the "Next Free Rec:" had overshot the "Count:" in the root metadata block. Inode: 33080590 Mode: 0640 Generation: 2619713622 (0x9c25a856) FS Generation: 904309833 (0x35e6ac49) CRC32: 00000000 ECC: 0000 Type: Regular Attr: 0x0 Flags: Valid Dynamic Features: (0x16) HasXattr InlineXattr Refcounted Extended Attributes Block: 0 Extended Attributes Inline Size: 256 User: 0 (root) Group: 0 (root) Size: 281320357888 Links: 1 Clusters: 141738 ctime: 0x66911b56 0x316edcb8 -- Fri Jul 12 06:02:30.829349048 2024 atime: 0x66911d6b 0x7f7a28d -- Fri Jul 12 06:11:23.133669517 2024 mtime: 0x66911b56 0x12ed75d7 -- Fri Jul 12 06:02:30.317552087 2024 dtime: 0x0 -- Wed Dec 31 17:00:00 1969 Refcount Block: 2777346 Last Extblk: 2886943 Orphan Slot: 0 Sub Alloc Slot: 0 Sub Alloc Bit: 14 Tree Depth: 1 Count: 227 Next Free Rec: 230 ## Offset Clusters Block# 0 0 2310 2776351 1 2310 2139 2777375 2 4449 1221 2778399 3 5670 731 2779423 4 6401 566 2780447 ....... .... ....... ....... .... ....... The issue was in the reflink workfow while reserving space for inline xattr. The problematic function is ocfs2_reflink_xattr_inline(). By the time this function is called the reflink tree is already recreated at the destination inode from the source inode. At this point, this function reserves space for inline xattrs at the destination inode without even checking if there is space at the root metadata block. It simply reduces the l_count from 243 to 227 thereby making space of 256 bytes for inline xattr whereas the inode already has extents beyond this index (in this case up to 230), thereby causing corruption. The fix for this is to reserve space for inline metadata at the destination inode before the reflink tree gets recreated. The customer has verified the fix. |
| CVE-2024-49957 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix null-ptr-deref when journal load failed. During the mounting process, if journal_reset() fails because of too short journal, then lead to jbd2_journal_load() fails with NULL j_sb_buffer. Subsequently, ocfs2_journal_shutdown() calls jbd2_journal_flush()->jbd2_cleanup_journal_tail()-> __jbd2_update_log_tail()->jbd2_journal_update_sb_log_tail() ->lock_buffer(journal->j_sb_buffer), resulting in a null-pointer dereference error. To resolve this issue, we should check the JBD2_LOADED flag to ensure the journal was properly loaded. Additionally, use journal instead of osb->journal directly to simplify the code. |
| CVE-2024-49956 | In the Linux kernel, the following vulnerability has been resolved: gfs2: fix double destroy_workqueue error When gfs2_fill_super() fails, destroy_workqueue() is called within gfs2_gl_hash_clear(), and the subsequent code path calls destroy_workqueue() on the same work queue again. This issue can be fixed by setting the work queue pointer to NULL after the first destroy_workqueue() call and checking for a NULL pointer before attempting to destroy the work queue again. |
| CVE-2024-49955 | In the Linux kernel, the following vulnerability has been resolved: ACPI: battery: Fix possible crash when unregistering a battery hook When a battery hook returns an error when adding a new battery, then the battery hook is automatically unregistered. However the battery hook provider cannot know that, so it will later call battery_hook_unregister() on the already unregistered battery hook, resulting in a crash. Fix this by using the list head to mark already unregistered battery hooks as already being unregistered so that they can be ignored by battery_hook_unregister(). |
| CVE-2024-49954 | In the Linux kernel, the following vulnerability has been resolved: static_call: Replace pointless WARN_ON() in static_call_module_notify() static_call_module_notify() triggers a WARN_ON(), when memory allocation fails in __static_call_add_module(). That's not really justified, because the failure case must be correctly handled by the well known call chain and the error code is passed through to the initiating userspace application. A memory allocation fail is not a fatal problem, but the WARN_ON() takes the machine out when panic_on_warn is set. Replace it with a pr_warn(). |
| CVE-2024-49953 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix crash caused by calling __xfrm_state_delete() twice The km.state is not checked in driver's delayed work. When xfrm_state_check_expire() is called, the state can be reset to XFRM_STATE_EXPIRED, even if it is XFRM_STATE_DEAD already. This happens when xfrm state is deleted, but not freed yet. As __xfrm_state_delete() is called again in xfrm timer, the following crash occurs. To fix this issue, skip xfrm_state_check_expire() if km.state is not XFRM_STATE_VALID. Oops: general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] SMP CPU: 5 UID: 0 PID: 7448 Comm: kworker/u102:2 Not tainted 6.11.0-rc2+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e_ipsec: eth%d mlx5e_ipsec_handle_sw_limits [mlx5_core] RIP: 0010:__xfrm_state_delete+0x3d/0x1b0 Code: 0f 84 8b 01 00 00 48 89 fd c6 87 c8 00 00 00 05 48 8d bb 40 10 00 00 e8 11 04 1a 00 48 8b 95 b8 00 00 00 48 8b 85 c0 00 00 00 <48> 89 42 08 48 89 10 48 8b 55 10 48 b8 00 01 00 00 00 00 ad de 48 RSP: 0018:ffff88885f945ec8 EFLAGS: 00010246 RAX: dead000000000122 RBX: ffffffff82afa940 RCX: 0000000000000036 RDX: dead000000000100 RSI: 0000000000000000 RDI: ffffffff82afb980 RBP: ffff888109a20340 R08: ffff88885f945ea0 R09: 0000000000000000 R10: 0000000000000000 R11: ffff88885f945ff8 R12: 0000000000000246 R13: ffff888109a20340 R14: ffff88885f95f420 R15: ffff88885f95f400 FS: 0000000000000000(0000) GS:ffff88885f940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2163102430 CR3: 00000001128d6001 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? die_addr+0x33/0x90 ? exc_general_protection+0x1a2/0x390 ? asm_exc_general_protection+0x22/0x30 ? __xfrm_state_delete+0x3d/0x1b0 ? __xfrm_state_delete+0x2f/0x1b0 xfrm_timer_handler+0x174/0x350 ? __xfrm_state_delete+0x1b0/0x1b0 __hrtimer_run_queues+0x121/0x270 hrtimer_run_softirq+0x88/0xd0 handle_softirqs+0xcc/0x270 do_softirq+0x3c/0x50 </IRQ> <TASK> __local_bh_enable_ip+0x47/0x50 mlx5e_ipsec_handle_sw_limits+0x7d/0x90 [mlx5_core] process_one_work+0x137/0x2d0 worker_thread+0x28d/0x3a0 ? rescuer_thread+0x480/0x480 kthread+0xb8/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 </TASK> |
| CVE-2024-49952 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: prevent nf_skb_duplicated corruption syzbot found that nf_dup_ipv4() or nf_dup_ipv6() could write per-cpu variable nf_skb_duplicated in an unsafe way [1]. Disabling preemption as hinted by the splat is not enough, we have to disable soft interrupts as well. [1] BUG: using __this_cpu_write() in preemptible [00000000] code: syz.4.282/6316 caller is nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 CPU: 0 UID: 0 PID: 6316 Comm: syz.4.282 Not tainted 6.11.0-rc7-syzkaller-00104-g7052622fccb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_preemption_disabled+0x10e/0x120 lib/smp_processor_id.c:49 nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 nft_dup_ipv4_eval+0x1db/0x300 net/ipv4/netfilter/nft_dup_ipv4.c:30 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288 nft_do_chain_ipv4+0x202/0x320 net/netfilter/nft_chain_filter.c:23 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook+0x2c4/0x450 include/linux/netfilter.h:269 NF_HOOK_COND include/linux/netfilter.h:302 [inline] ip_output+0x185/0x230 net/ipv4/ip_output.c:433 ip_local_out net/ipv4/ip_output.c:129 [inline] ip_send_skb+0x74/0x100 net/ipv4/ip_output.c:1495 udp_send_skb+0xacf/0x1650 net/ipv4/udp.c:981 udp_sendmsg+0x1c21/0x2a60 net/ipv4/udp.c:1269 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f4ce4f7def9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f4ce5d4a038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f4ce5135f80 RCX: 00007f4ce4f7def9 RDX: 0000000000000001 RSI: 0000000020005d40 RDI: 0000000000000006 RBP: 00007f4ce4ff0b76 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f4ce5135f80 R15: 00007ffd4cbc6d68 </TASK> |
| CVE-2024-49951 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix possible crash on mgmt_index_removed If mgmt_index_removed is called while there are commands queued on cmd_sync it could lead to crashes like the bellow trace: 0x0000053D: __list_del_entry_valid_or_report+0x98/0xdc 0x0000053D: mgmt_pending_remove+0x18/0x58 [bluetooth] 0x0000053E: mgmt_remove_adv_monitor_complete+0x80/0x108 [bluetooth] 0x0000053E: hci_cmd_sync_work+0xbc/0x164 [bluetooth] So while handling mgmt_index_removed this attempts to dequeue commands passed as user_data to cmd_sync. |
| CVE-2024-49950 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix uaf in l2cap_connect [Syzbot reported] BUG: KASAN: slab-use-after-free in l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 Read of size 8 at addr ffff8880241e9800 by task kworker/u9:0/54 CPU: 0 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-00268-g788220eee30d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Workqueue: hci2 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 l2cap_connect_req net/bluetooth/l2cap_core.c:4080 [inline] l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:4772 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5543 [inline] l2cap_recv_frame+0xf0b/0x8eb0 net/bluetooth/l2cap_core.c:6825 l2cap_recv_acldata+0x9b4/0xb70 net/bluetooth/l2cap_core.c:7514 hci_acldata_packet net/bluetooth/hci_core.c:3791 [inline] hci_rx_work+0xaab/0x1610 net/bluetooth/hci_core.c:4028 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 ... Freed by task 5245: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579 poison_slab_object+0xf7/0x160 mm/kasan/common.c:240 __kasan_slab_free+0x32/0x50 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2256 [inline] slab_free mm/slub.c:4477 [inline] kfree+0x12a/0x3b0 mm/slub.c:4598 l2cap_conn_free net/bluetooth/l2cap_core.c:1810 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_conn_put net/bluetooth/l2cap_core.c:1822 [inline] l2cap_conn_del+0x59d/0x730 net/bluetooth/l2cap_core.c:1802 l2cap_connect_cfm+0x9e6/0xf80 net/bluetooth/l2cap_core.c:7241 hci_connect_cfm include/net/bluetooth/hci_core.h:1960 [inline] hci_conn_failed+0x1c3/0x370 net/bluetooth/hci_conn.c:1265 hci_abort_conn_sync+0x75a/0xb50 net/bluetooth/hci_sync.c:5583 abort_conn_sync+0x197/0x360 net/bluetooth/hci_conn.c:2917 hci_cmd_sync_work+0x1a4/0x410 net/bluetooth/hci_sync.c:328 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 |
| CVE-2024-49949 | In the Linux kernel, the following vulnerability has been resolved: net: avoid potential underflow in qdisc_pkt_len_init() with UFO After commit 7c6d2ecbda83 ("net: be more gentle about silly gso requests coming from user") virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space to cook a bad GSO packet. Then commit cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO") while fixing one issue, allowed user space to cook a GSO packet with the following characteristic : IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28. When this packet arrives in qdisc_pkt_len_init(), we end up with hdr_len = 28 (IPv4 header + UDP header), matching skb->len Then the following sets gso_segs to 0 : gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size); Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/ qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len; This leads to the following crash in fq_codel [1] qdisc_pkt_len_init() is best effort, we only want an estimation of the bytes sent on the wire, not crashing the kernel. This patch is fixing this particular issue, a following one adds more sanity checks for another potential bug. [1] [ 70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm: b358537762 Not tainted 6.11.0-virtme #991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49 All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp) b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx 22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34 mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB Code starting with the faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11 mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09: ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [ 70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS: 000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES: 0000 C ---truncated--- |
| CVE-2024-49948 | In the Linux kernel, the following vulnerability has been resolved: net: add more sanity checks to qdisc_pkt_len_init() One path takes care of SKB_GSO_DODGY, assuming skb->len is bigger than hdr_len. virtio_net_hdr_to_skb() does not fully dissect TCP headers, it only make sure it is at least 20 bytes. It is possible for an user to provide a malicious 'GSO' packet, total length of 80 bytes. - 20 bytes of IPv4 header - 60 bytes TCP header - a small gso_size like 8 virtio_net_hdr_to_skb() would declare this packet as a normal GSO packet, because it would see 40 bytes of payload, bigger than gso_size. We need to make detect this case to not underflow qdisc_skb_cb(skb)->pkt_len. |
| CVE-2024-49947 | In the Linux kernel, the following vulnerability has been resolved: net: test for not too small csum_start in virtio_net_hdr_to_skb() syzbot was able to trigger this warning [1], after injecting a malicious packet through af_packet, setting skb->csum_start and thus the transport header to an incorrect value. We can at least make sure the transport header is after the end of the network header (with a estimated minimal size). [1] [ 67.873027] skb len=4096 headroom=16 headlen=14 tailroom=0 mac=(-1,-1) mac_len=0 net=(16,-6) trans=10 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0xa start=10 offset=0 ip_summed=3 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0800 pkttype=0 iif=0 priority=0x0 mark=0x0 alloc_cpu=10 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 67.877172] dev name=veth0_vlan feat=0x000061164fdd09e9 [ 67.877764] sk family=17 type=3 proto=0 [ 67.878279] skb linear: 00000000: 00 00 10 00 00 00 00 00 0f 00 00 00 08 00 [ 67.879128] skb frag: 00000000: 0e 00 07 00 00 00 28 00 08 80 1c 00 04 00 00 02 [ 67.879877] skb frag: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.880647] skb frag: 00000020: 00 00 02 00 00 00 08 00 1b 00 00 00 00 00 00 00 [ 67.881156] skb frag: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.881753] skb frag: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882173] skb frag: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882790] skb frag: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883171] skb frag: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883733] skb frag: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.884206] skb frag: 00000090: 00 00 00 00 00 00 00 00 00 00 69 70 76 6c 61 6e [ 67.884704] skb frag: 000000a0: 31 00 00 00 00 00 00 00 00 00 2b 00 00 00 00 00 [ 67.885139] skb frag: 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.885677] skb frag: 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886042] skb frag: 000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886408] skb frag: 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887020] skb frag: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887384] skb frag: 00000100: 00 00 [ 67.887878] ------------[ cut here ]------------ [ 67.887908] offset (-6) >= skb_headlen() (14) [ 67.888445] WARNING: CPU: 10 PID: 2088 at net/core/dev.c:3332 skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.889353] Modules linked in: macsec macvtap macvlan hsr wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 libchacha poly1305_x86_64 dummy bridge sr_mod cdrom evdev pcspkr i2c_piix4 9pnet_virtio 9p 9pnet netfs [ 67.890111] CPU: 10 UID: 0 PID: 2088 Comm: b363492833 Not tainted 6.11.0-virtme #1011 [ 67.890183] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 67.890309] RIP: 0010:skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891043] Call Trace: [ 67.891173] <TASK> [ 67.891274] ? __warn (kernel/panic.c:741) [ 67.891320] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891333] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 67.891348] ? handle_bug (arch/x86/kernel/traps.c:239) [ 67.891363] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 67.891372] ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) [ 67.891388] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891399] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891416] ip_do_fragment (net/ipv4/ip_output.c:777 (discriminator 1)) [ 67.891448] ? __ip_local_out (./include/linux/skbuff.h:1146 ./include/net/l3mdev.h:196 ./include/net/l3mdev.h:213 ne ---truncated--- |
| CVE-2024-49946 | In the Linux kernel, the following vulnerability has been resolved: ppp: do not assume bh is held in ppp_channel_bridge_input() Networking receive path is usually handled from BH handler. However, some protocols need to acquire the socket lock, and packets might be stored in the socket backlog is the socket was owned by a user process. In this case, release_sock(), __release_sock(), and sk_backlog_rcv() might call the sk->sk_backlog_rcv() handler in process context. sybot caught ppp was not considering this case in ppp_channel_bridge_input() : WARNING: inconsistent lock state 6.11.0-rc7-syzkaller-g5f5673607153 #0 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/1/24 [HC0[0]:SC1[1]:HE1:SE0] takes: ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0x240/0x728 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x48/0x60 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0xfc/0x314 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x1a8/0x3d8 net/core/sock.c:3004 release_sock+0x68/0x1b8 net/core/sock.c:3558 pppoe_sendmsg+0xc8/0x5d8 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x374/0x4f4 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __arm64_sys_sendto+0xd8/0xf8 net/socket.c:2212 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 irq event stamp: 282914 hardirqs last enabled at (282914): [<ffff80008b42e30c>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:151 [inline] hardirqs last enabled at (282914): [<ffff80008b42e30c>] _raw_spin_unlock_irqrestore+0x38/0x98 kernel/locking/spinlock.c:194 hardirqs last disabled at (282913): [<ffff80008b42e13c>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (282913): [<ffff80008b42e13c>] _raw_spin_lock_irqsave+0x2c/0x7c kernel/locking/spinlock.c:162 softirqs last enabled at (282904): [<ffff8000801f8e88>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (282904): [<ffff8000801f8e88>] handle_softirqs+0xa3c/0xbfc kernel/softirq.c:582 softirqs last disabled at (282909): [<ffff8000801fbdf8>] run_ksoftirqd+0x70/0x158 kernel/softirq.c:928 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&pch->downl); <Interrupt> lock(&pch->downl); *** DEADLOCK *** 1 lock held by ksoftirqd/1/24: #0: ffff80008f74dfa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire+0x10/0x4c include/linux/rcupdate.h:325 stack backtrace: CPU: 1 UID: 0 PID: 24 Comm: ksoftirqd/1 Not tainted 6.11.0-rc7-syzkaller-g5f5673607153 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:319 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:326 __dump_sta ---truncated--- |
| CVE-2024-49945 | In the Linux kernel, the following vulnerability has been resolved: net/ncsi: Disable the ncsi work before freeing the associated structure The work function can run after the ncsi device is freed, resulting in use-after-free bugs or kernel panic. |
| CVE-2024-49944 | In the Linux kernel, the following vulnerability has been resolved: sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start In sctp_listen_start() invoked by sctp_inet_listen(), it should set the sk_state back to CLOSED if sctp_autobind() fails due to whatever reason. Otherwise, next time when calling sctp_inet_listen(), if sctp_sk(sk)->reuse is already set via setsockopt(SCTP_REUSE_PORT), sctp_sk(sk)->bind_hash will be dereferenced as sk_state is LISTENING, which causes a crash as bind_hash is NULL. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_inet_listen+0x7f0/0xa20 net/sctp/socket.c:8617 Call Trace: <TASK> __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] |
| CVE-2024-49943 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc_submit: add missing locking in wedged_fini Any non-wedged queue can have a zero refcount here and can be running concurrently with an async queue destroy, therefore dereferencing the queue ptr to check wedge status after the lookup can trigger UAF if queue is not wedged. Fix this by keeping the submission_state lock held around the check to postpone the free and make the check safe, before dropping again around the put() to avoid the deadlock. (cherry picked from commit d28af0b6b9580b9f90c265a7da0315b0ad20bbfd) |
| CVE-2024-49942 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Prevent null pointer access in xe_migrate_copy xe_migrate_copy designed to copy content of TTM resources. When source resource is null, it will trigger a NULL pointer dereference in xe_migrate_copy. To avoid this situation, update lacks source flag to true for this case, the flag will trigger xe_migrate_clear rather than xe_migrate_copy. Issue trace: <7> [317.089847] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 14, sizes: 4194304 & 4194304 <7> [317.089945] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 15, sizes: 4194304 & 4194304 <1> [317.128055] BUG: kernel NULL pointer dereference, address: 0000000000000010 <1> [317.128064] #PF: supervisor read access in kernel mode <1> [317.128066] #PF: error_code(0x0000) - not-present page <6> [317.128069] PGD 0 P4D 0 <4> [317.128071] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI <4> [317.128074] CPU: 1 UID: 0 PID: 1440 Comm: kunit_try_catch Tainted: G U N 6.11.0-rc7-xe #1 <4> [317.128078] Tainted: [U]=USER, [N]=TEST <4> [317.128080] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3221.D80.2407291239 07/29/2024 <4> [317.128082] RIP: 0010:xe_migrate_copy+0x66/0x13e0 [xe] <4> [317.128158] Code: 00 00 48 89 8d e0 fe ff ff 48 8b 40 10 4c 89 85 c8 fe ff ff 44 88 8d bd fe ff ff 65 48 8b 3c 25 28 00 00 00 48 89 7d d0 31 ff <8b> 79 10 48 89 85 a0 fe ff ff 48 8b 00 48 89 b5 d8 fe ff ff 83 ff <4> [317.128162] RSP: 0018:ffffc9000167f9f0 EFLAGS: 00010246 <4> [317.128164] RAX: ffff8881120d8028 RBX: ffff88814d070428 RCX: 0000000000000000 <4> [317.128166] RDX: ffff88813cb99c00 RSI: 0000000004000000 RDI: 0000000000000000 <4> [317.128168] RBP: ffffc9000167fbb8 R08: ffff88814e7b1f08 R09: 0000000000000001 <4> [317.128170] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88814e7b1f08 <4> [317.128172] R13: ffff88814e7b1f08 R14: ffff88813cb99c00 R15: 0000000000000001 <4> [317.128174] FS: 0000000000000000(0000) GS:ffff88846f280000(0000) knlGS:0000000000000000 <4> [317.128176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [317.128178] CR2: 0000000000000010 CR3: 000000011f676004 CR4: 0000000000770ef0 <4> [317.128180] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4> [317.128182] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 <4> [317.128184] PKRU: 55555554 <4> [317.128185] Call Trace: <4> [317.128187] <TASK> <4> [317.128189] ? show_regs+0x67/0x70 <4> [317.128194] ? __die_body+0x20/0x70 <4> [317.128196] ? __die+0x2b/0x40 <4> [317.128198] ? page_fault_oops+0x15f/0x4e0 <4> [317.128203] ? do_user_addr_fault+0x3fb/0x970 <4> [317.128205] ? lock_acquire+0xc7/0x2e0 <4> [317.128209] ? exc_page_fault+0x87/0x2b0 <4> [317.128212] ? asm_exc_page_fault+0x27/0x30 <4> [317.128216] ? xe_migrate_copy+0x66/0x13e0 [xe] <4> [317.128263] ? __lock_acquire+0xb9d/0x26f0 <4> [317.128265] ? __lock_acquire+0xb9d/0x26f0 <4> [317.128267] ? sg_free_append_table+0x20/0x80 <4> [317.128271] ? lock_acquire+0xc7/0x2e0 <4> [317.128273] ? mark_held_locks+0x4d/0x80 <4> [317.128275] ? trace_hardirqs_on+0x1e/0xd0 <4> [317.128278] ? _raw_spin_unlock_irqrestore+0x31/0x60 <4> [317.128281] ? __pm_runtime_resume+0x60/0xa0 <4> [317.128284] xe_bo_move+0x682/0xc50 [xe] <4> [317.128315] ? lock_is_held_type+0xaa/0x120 <4> [317.128318] ttm_bo_handle_move_mem+0xe5/0x1a0 [ttm] <4> [317.128324] ttm_bo_validate+0xd1/0x1a0 [ttm] <4> [317.128328] shrink_test_run_device+0x721/0xc10 [xe] <4> [317.128360] ? find_held_lock+0x31/0x90 <4> [317.128363] ? lock_release+0xd1/0x2a0 <4> [317.128365] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] <4> [317.128370] xe_bo_shrink_kunit+0x11/0x20 [xe] <4> [317.128397] kunit_try_run_case+0x6e/0x150 [kunit] <4> [317.128400] ? trace_hardirqs_on+0x1e/0xd0 <4> [317.128402] ? _raw_spin_unlock_irqrestore+0x31/0x60 <4> [317.128404] kunit_generic_run_threadfn_adapter+0x1e/0x40 [ku ---truncated--- |
| CVE-2024-49941 | In the Linux kernel, the following vulnerability has been resolved: gpiolib: Fix potential NULL pointer dereference in gpiod_get_label() In `gpiod_get_label()`, it is possible that `srcu_dereference_check()` may return a NULL pointer, leading to a scenario where `label->str` is accessed without verifying if `label` itself is NULL. This patch adds a proper NULL check for `label` before accessing `label->str`. The check for `label->str != NULL` is removed because `label->str` can never be NULL if `label` is not NULL. This fixes the issue where the label name was being printed as `(efault)` when dumping the sysfs GPIO file when `label == NULL`. |
| CVE-2024-49940 | In the Linux kernel, the following vulnerability has been resolved: l2tp: prevent possible tunnel refcount underflow When a session is created, it sets a backpointer to its tunnel. When the session refcount drops to 0, l2tp_session_free drops the tunnel refcount if session->tunnel is non-NULL. However, session->tunnel is set in l2tp_session_create, before the tunnel refcount is incremented by l2tp_session_register, which leaves a small window where session->tunnel is non-NULL when the tunnel refcount hasn't been bumped. Moving the assignment to l2tp_session_register is trivial but l2tp_session_create calls l2tp_session_set_header_len which uses session->tunnel to get the tunnel's encap. Add an encap arg to l2tp_session_set_header_len to avoid using session->tunnel. If l2tpv3 sessions have colliding IDs, it is possible for l2tp_v3_session_get to race with l2tp_session_register and fetch a session which doesn't yet have session->tunnel set. Add a check for this case. |
| CVE-2024-49939 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: avoid to add interface to list twice when SER If SER L2 occurs during the WoWLAN resume flow, the add interface flow is triggered by ieee80211_reconfig(). However, due to rtw89_wow_resume() return failure, it will cause the add interface flow to be executed again, resulting in a double add list and causing a kernel panic. Therefore, we have added a check to prevent double adding of the list. list_add double add: new=ffff99d6992e2010, prev=ffff99d6992e2010, next=ffff99d695302628. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:37! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W O 6.6.30-02659-gc18865c4dfbd #1 770df2933251a0e3c888ba69d1053a817a6376a7 Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.169.0 06/24/2021 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:__list_add_valid_or_report+0x5e/0xb0 Code: c7 74 18 48 39 ce 74 13 b0 01 59 5a 5e 5f 41 58 41 59 41 5a 5d e9 e2 d6 03 00 cc 48 c7 c7 8d 4f 17 83 48 89 c2 e8 02 c0 00 00 <0f> 0b 48 c7 c7 aa 8c 1c 83 e8 f4 bf 00 00 0f 0b 48 c7 c7 c8 bc 12 RSP: 0018:ffffa91b8007bc50 EFLAGS: 00010246 RAX: 0000000000000058 RBX: ffff99d6992e0900 RCX: a014d76c70ef3900 RDX: ffffa91b8007bae8 RSI: 00000000ffffdfff RDI: 0000000000000001 RBP: ffffa91b8007bc88 R08: 0000000000000000 R09: ffffa91b8007bae0 R10: 00000000ffffdfff R11: ffffffff83a79800 R12: ffff99d695302060 R13: ffff99d695300900 R14: ffff99d6992e1be0 R15: ffff99d6992e2010 FS: 0000000000000000(0000) GS:ffff99d6aac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000078fbdba43480 CR3: 000000010e464000 CR4: 00000000001506f0 Call Trace: <TASK> ? __die_body+0x1f/0x70 ? die+0x3d/0x60 ? do_trap+0xa4/0x110 ? __list_add_valid_or_report+0x5e/0xb0 ? do_error_trap+0x6d/0x90 ? __list_add_valid_or_report+0x5e/0xb0 ? handle_invalid_op+0x30/0x40 ? __list_add_valid_or_report+0x5e/0xb0 ? exc_invalid_op+0x3c/0x50 ? asm_exc_invalid_op+0x16/0x20 ? __list_add_valid_or_report+0x5e/0xb0 rtw89_ops_add_interface+0x309/0x310 [rtw89_core 7c32b1ee6854761c0321027c8a58c5160e41f48f] drv_add_interface+0x5c/0x130 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] ieee80211_reconfig+0x241/0x13d0 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] ? finish_wait+0x3e/0x90 ? synchronize_rcu_expedited+0x174/0x260 ? sync_rcu_exp_done_unlocked+0x50/0x50 ? wake_bit_function+0x40/0x40 ieee80211_restart_work+0xf0/0x140 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] process_scheduled_works+0x1e5/0x480 worker_thread+0xea/0x1e0 kthread+0xdb/0x110 ? move_linked_works+0x90/0x90 ? kthread_associate_blkcg+0xa0/0xa0 ret_from_fork+0x3b/0x50 ? kthread_associate_blkcg+0xa0/0xa0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: dm_integrity async_xor xor async_tx lz4 lz4_compress zstd zstd_compress zram zsmalloc rfcomm cmac uinput algif_hash algif_skcipher af_alg btusb btrtl iio_trig_hrtimer industrialio_sw_trigger btmtk industrialio_configfs btbcm btintel uvcvideo videobuf2_vmalloc iio_trig_sysfs videobuf2_memops videobuf2_v4l2 videobuf2_common uvc snd_hda_codec_hdmi veth snd_hda_intel snd_intel_dspcfg acpi_als snd_hda_codec industrialio_triggered_buffer kfifo_buf snd_hwdep industrialio i2c_piix4 snd_hda_core designware_i2s ip6table_nat snd_soc_max98357a xt_MASQUERADE xt_cgroup snd_soc_acp_rt5682_mach fuse rtw89_8922ae(O) rtw89_8922a(O) rtw89_pci(O) rtw89_core(O) 8021q mac80211(O) bluetooth ecdh_generic ecc cfg80211 r8152 mii joydev gsmi: Log Shutdown Reason 0x03 ---[ end trace 0000000000000000 ]--- |
| CVE-2024-49938 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: Use __skb_set_length() for resetting urb before resubmit Syzbot points out that skb_trim() has a sanity check on the existing length of the skb, which can be uninitialised in some error paths. The intent here is clearly just to reset the length to zero before resubmitting, so switch to calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length() already contains a call to skb_reset_tail_pointer(), so remove the redundant call. The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it. |
| CVE-2024-49937 | In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Set correct chandef when starting CAC When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]" caused by the chandef.chan being null at the end of CAC. Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC. Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24 [shorten subject, remove OCB, reorder cases to match previous list] |
| CVE-2024-49936 | In the Linux kernel, the following vulnerability has been resolved: net/xen-netback: prevent UAF in xenvif_flush_hash() During the list_for_each_entry_rcu iteration call of xenvif_flush_hash, kfree_rcu does not exist inside the rcu read critical section, so if kfree_rcu is called when the rcu grace period ends during the iteration, UAF occurs when accessing head->next after the entry becomes free. Therefore, to solve this, you need to change it to list_for_each_entry_safe. |
| CVE-2024-49935 | In the Linux kernel, the following vulnerability has been resolved: ACPI: PAD: fix crash in exit_round_robin() The kernel occasionally crashes in cpumask_clear_cpu(), which is called within exit_round_robin(), because when executing clear_bit(nr, addr) with nr set to 0xffffffff, the address calculation may cause misalignment within the memory, leading to access to an invalid memory address. ---------- BUG: unable to handle kernel paging request at ffffffffe0740618 ... CPU: 3 PID: 2919323 Comm: acpi_pad/14 Kdump: loaded Tainted: G OE X --------- - - 4.18.0-425.19.2.el8_7.x86_64 #1 ... RIP: 0010:power_saving_thread+0x313/0x411 [acpi_pad] Code: 89 cd 48 89 d3 eb d1 48 c7 c7 55 70 72 c0 e8 64 86 b0 e4 c6 05 0d a1 02 00 01 e9 bc fd ff ff 45 89 e4 42 8b 04 a5 20 82 72 c0 <f0> 48 0f b3 05 f4 9c 01 00 42 c7 04 a5 20 82 72 c0 ff ff ff ff 31 RSP: 0018:ff72a5d51fa77ec8 EFLAGS: 00010202 RAX: 00000000ffffffff RBX: ff462981e5d8cb80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ff46297556959d80 R08: 0000000000000382 R09: ff46297c8d0f38d8 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000000e R13: 0000000000000000 R14: ffffffffffffffff R15: 000000000000000e FS: 0000000000000000(0000) GS:ff46297a800c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffe0740618 CR3: 0000007e20410004 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? acpi_pad_add+0x120/0x120 [acpi_pad] kthread+0x10b/0x130 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x40 ... CR2: ffffffffe0740618 crash> dis -lr ffffffffc0726923 ... /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 114 0xffffffffc0726918 <power_saving_thread+776>: mov %r12d,%r12d /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 325 0xffffffffc072691b <power_saving_thread+779>: mov -0x3f8d7de0(,%r12,4),%eax /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./arch/x86/include/asm/bitops.h: 80 0xffffffffc0726923 <power_saving_thread+787>: lock btr %rax,0x19cf4(%rip) # 0xffffffffc0740620 <pad_busy_cpus_bits> crash> px tsk_in_cpu[14] $66 = 0xffffffff crash> px 0xffffffffc072692c+0x19cf4 $99 = 0xffffffffc0740620 crash> sym 0xffffffffc0740620 ffffffffc0740620 (b) pad_busy_cpus_bits [acpi_pad] crash> px pad_busy_cpus_bits[0] $42 = 0xfffc0 ---------- To fix this, ensure that tsk_in_cpu[tsk_index] != -1 before calling cpumask_clear_cpu() in exit_round_robin(), just as it is done in round_robin_cpu(). [ rjw: Subject edit, avoid updates to the same value ] |
| CVE-2024-49934 | In the Linux kernel, the following vulnerability has been resolved: fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name It's observed that a crash occurs during hot-remove a memory device, in which user is accessing the hugetlb. See calltrace as following: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 14045 at arch/x86/mm/fault.c:1278 do_user_addr_fault+0x2a0/0x790 Modules linked in: kmem device_dax cxl_mem cxl_pmem cxl_port cxl_pci dax_hmem dax_pmem nd_pmem cxl_acpi nd_btt cxl_core crc32c_intel nvme virtiofs fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc s mirror dm_region_hash dm_log dm_mod CPU: 1 PID: 14045 Comm: daxctl Not tainted 6.10.0-rc2-lizhijian+ #492 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:do_user_addr_fault+0x2a0/0x790 Code: 48 8b 00 a8 04 0f 84 b5 fe ff ff e9 1c ff ff ff 4c 89 e9 4c 89 e2 be 01 00 00 00 bf 02 00 00 00 e8 b5 ef 24 00 e9 42 fe ff ff <0f> 0b 48 83 c4 08 4c 89 ea 48 89 ee 4c 89 e7 5b 5d 41 5c 41 5d 41 RSP: 0000:ffffc90000a575f0 EFLAGS: 00010046 RAX: ffff88800c303600 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000001000 RSI: ffffffff82504162 RDI: ffffffff824b2c36 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90000a57658 R13: 0000000000001000 R14: ffff88800bc2e040 R15: 0000000000000000 FS: 00007f51cb57d880(0000) GS:ffff88807fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001000 CR3: 00000000072e2004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x8d/0x190 ? do_user_addr_fault+0x2a0/0x790 ? report_bug+0x1c3/0x1d0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? do_user_addr_fault+0x2a0/0x790 ? exc_page_fault+0x31/0x200 exc_page_fault+0x68/0x200 <...snip...> BUG: unable to handle page fault for address: 0000000000001000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI ---[ end trace 0000000000000000 ]--- BUG: unable to handle page fault for address: 0000000000001000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 14045 Comm: daxctl Kdump: loaded Tainted: G W 6.10.0-rc2-lizhijian+ #492 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dentry_name+0x1f4/0x440 <...snip...> ? dentry_name+0x2fa/0x440 vsnprintf+0x1f3/0x4f0 vprintk_store+0x23a/0x540 vprintk_emit+0x6d/0x330 _printk+0x58/0x80 dump_mapping+0x10b/0x1a0 ? __pfx_free_object_rcu+0x10/0x10 __dump_page+0x26b/0x3e0 ? vprintk_emit+0xe0/0x330 ? _printk+0x58/0x80 ? dump_page+0x17/0x50 dump_page+0x17/0x50 do_migrate_range+0x2f7/0x7f0 ? do_migrate_range+0x42/0x7f0 ? offline_pages+0x2f4/0x8c0 offline_pages+0x60a/0x8c0 memory_subsys_offline+0x9f/0x1c0 ? lockdep_hardirqs_on+0x77/0x100 ? _raw_spin_unlock_irqrestore+0x38/0x60 device_offline+0xe3/0x110 state_store+0x6e/0xc0 kernfs_fop_write_iter+0x143/0x200 vfs_write+0x39f/0x560 ksys_write+0x65/0xf0 do_syscall_64+0x62/0x130 Previously, some sanity check have been done in dump_mapping() before the print facility parsing '%pd' though, it's still possible to run into an invalid dentry.d_name.name. Since dump_mapping() only needs to dump the filename only, retrieve it by itself in a safer way to prevent an unnecessary crash. Note that either retrieving the filename with '%pd' or strncpy_from_kernel_nofault(), the filename could be unreliable. |
| CVE-2024-49933 | In the Linux kernel, the following vulnerability has been resolved: blk_iocost: fix more out of bound shifts Recently running UBSAN caught few out of bound shifts in the ioc_forgive_debts() function: UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... Call Trace: <IRQ> dump_stack_lvl+0xca/0x130 __ubsan_handle_shift_out_of_bounds+0x22c/0x280 ? __lock_acquire+0x6441/0x7c10 ioc_timer_fn+0x6cec/0x7750 ? blk_iocost_init+0x720/0x720 ? call_timer_fn+0x5d/0x470 call_timer_fn+0xfa/0x470 ? blk_iocost_init+0x720/0x720 __run_timer_base+0x519/0x700 ... Actual impact of this issue was not identified but I propose to fix the undefined behaviour. The proposed fix to prevent those out of bound shifts consist of precalculating exponent before using it the shift operations by taking min value from the actual exponent and maximum possible number of bits. |
| CVE-2024-49932 | In the Linux kernel, the following vulnerability has been resolved: btrfs: don't readahead the relocation inode on RST On relocation we're doing readahead on the relocation inode, but if the filesystem is backed by a RAID stripe tree we can get ENOENT (e.g. due to preallocated extents not being mapped in the RST) from the lookup. But readahead doesn't handle the error and submits invalid reads to the device, causing an assertion in the scatter-gather list code: BTRFS info (device nvme1n1): balance: start -d -m -s BTRFS info (device nvme1n1): relocating block group 6480920576 flags data|raid0 BTRFS error (device nvme1n1): cannot find raid-stripe for logical [6481928192, 6481969152] devid 2, profile raid0 ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:115! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1012 Comm: btrfs Not tainted 6.10.0-rc7+ #567 RIP: 0010:__blk_rq_map_sg+0x339/0x4a0 RSP: 0018:ffffc90001a43820 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802 RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000 RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8 R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000 FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002cd11000 CR3: 00000001109ea001 CR4: 0000000000370eb0 Call Trace: <TASK> ? __die_body.cold+0x14/0x25 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x65/0x80 ? __blk_rq_map_sg+0x339/0x4a0 ? exc_invalid_op+0x50/0x70 ? __blk_rq_map_sg+0x339/0x4a0 ? asm_exc_invalid_op+0x1a/0x20 ? __blk_rq_map_sg+0x339/0x4a0 nvme_prep_rq.part.0+0x9d/0x770 nvme_queue_rq+0x7d/0x1e0 __blk_mq_issue_directly+0x2a/0x90 ? blk_mq_get_budget_and_tag+0x61/0x90 blk_mq_try_issue_list_directly+0x56/0xf0 blk_mq_flush_plug_list.part.0+0x52b/0x5d0 __blk_flush_plug+0xc6/0x110 blk_finish_plug+0x28/0x40 read_pages+0x160/0x1c0 page_cache_ra_unbounded+0x109/0x180 relocate_file_extent_cluster+0x611/0x6a0 ? btrfs_search_slot+0xba4/0xd20 ? balance_dirty_pages_ratelimited_flags+0x26/0xb00 relocate_data_extent.constprop.0+0x134/0x160 relocate_block_group+0x3f2/0x500 btrfs_relocate_block_group+0x250/0x430 btrfs_relocate_chunk+0x3f/0x130 btrfs_balance+0x71b/0xef0 ? kmalloc_trace_noprof+0x13b/0x280 btrfs_ioctl+0x2c2e/0x3030 ? kvfree_call_rcu+0x1e6/0x340 ? list_lru_add_obj+0x66/0x80 ? mntput_no_expire+0x3a/0x220 __x64_sys_ioctl+0x96/0xc0 do_syscall_64+0x54/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fcc04514f9b Code: Unable to access opcode bytes at 0x7fcc04514f71. RSP: 002b:00007ffeba923370 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fcc04514f9b RDX: 00007ffeba923460 RSI: 00000000c4009420 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000013 R09: 0000000000000001 R10: 00007fcc043fbba8 R11: 0000000000000246 R12: 00007ffeba924fc5 R13: 00007ffeba923460 R14: 0000000000000002 R15: 00000000004d4bb0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:__blk_rq_map_sg+0x339/0x4a0 RSP: 0018:ffffc90001a43820 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802 RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000 RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8 R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000 FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcc04514f71 CR3: 00000001109ea001 CR4: 0000000000370eb0 Kernel p ---truncated--- |
| CVE-2024-49931 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix array out-of-bound access in SoC stats Currently, the ath12k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath12k_dp_rx_process() function access ath12k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath12k_dp_rx_process() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 |
| CVE-2024-49930 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix array out-of-bound access in SoC stats Currently, the ath11k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath11k_dp_process_rx() function access ath11k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath11k_dp_process_rx() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| CVE-2024-49929 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: avoid NULL pointer dereference iwl_mvm_tx_skb_sta() and iwl_mvm_tx_mpdu() verify that the mvmvsta pointer is not NULL. It retrieves this pointer using iwl_mvm_sta_from_mac80211, which is dereferencing the ieee80211_sta pointer. If sta is NULL, iwl_mvm_sta_from_mac80211 will dereference a NULL pointer. Fix this by checking the sta pointer before retrieving the mvmsta from it. If sta is not NULL, then mvmsta isn't either. |
| CVE-2024-49928 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: avoid reading out of bounds when loading TX power FW elements Because the loop-expression will do one more time before getting false from cond-expression, the original code copied one more entry size beyond valid region. Fix it by moving the entry copy to loop-body. |
| CVE-2024-49927 | In the Linux kernel, the following vulnerability has been resolved: x86/ioapic: Handle allocation failures gracefully Breno observed panics when using failslab under certain conditions during runtime: can not alloc irq_pin_list (-1,0,20) Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed panic+0x4e9/0x590 mp_irqdomain_alloc+0x9ab/0xa80 irq_domain_alloc_irqs_locked+0x25d/0x8d0 __irq_domain_alloc_irqs+0x80/0x110 mp_map_pin_to_irq+0x645/0x890 acpi_register_gsi_ioapic+0xe6/0x150 hpet_open+0x313/0x480 That's a pointless panic which is a leftover of the historic IO/APIC code which panic'ed during early boot when the interrupt allocation failed. The only place which might justify panic is the PIT/HPET timer_check() code which tries to figure out whether the timer interrupt is delivered through the IO/APIC. But that code does not require to handle interrupt allocation failures. If the interrupt cannot be allocated then timer delivery fails and it either panics due to that or falls back to legacy mode. Cure this by removing the panic wrapper around __add_pin_to_irq_node() and making mp_irqdomain_alloc() aware of the failure condition and handle it as any other failure in this function gracefully. |
| CVE-2024-49926 | In the Linux kernel, the following vulnerability has been resolved: rcu-tasks: Fix access non-existent percpu rtpcp variable in rcu_tasks_need_gpcb() For kernels built with CONFIG_FORCE_NR_CPUS=y, the nr_cpu_ids is defined as NR_CPUS instead of the number of possible cpus, this will cause the following system panic: smpboot: Allowing 4 CPUs, 0 hotplug CPUs ... setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1 ... BUG: unable to handle page fault for address: ffffffff9911c8c8 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W 6.6.21 #1 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6 RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0 RSP: 0018:ffffa371c00a3e60 EFLAGS: 00010082 CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x23/0x80 ? page_fault_oops+0xa4/0x180 ? exc_page_fault+0x152/0x180 ? asm_exc_page_fault+0x26/0x40 ? rcu_tasks_need_gpcb+0x25d/0x2c0 ? __pfx_rcu_tasks_kthread+0x40/0x40 rcu_tasks_one_gp+0x69/0x180 rcu_tasks_kthread+0x94/0xc0 kthread+0xe8/0x140 ? __pfx_kthread+0x40/0x40 ret_from_fork+0x34/0x80 ? __pfx_kthread+0x40/0x40 ret_from_fork_asm+0x1b/0x80 </TASK> Considering that there may be holes in the CPU numbers, use the maximum possible cpu number, instead of nr_cpu_ids, for configuring enqueue and dequeue limits. [ neeraj.upadhyay: Fix htmldocs build error reported by Stephen Rothwell ] |
| CVE-2024-49925 | In the Linux kernel, the following vulnerability has been resolved: fbdev: efifb: Register sysfs groups through driver core The driver core can register and cleanup sysfs groups already. Make use of that functionality to simplify the error handling and cleanup. Also avoid a UAF race during unregistering where the sysctl attributes were usable after the info struct was freed. |
| CVE-2024-49924 | In the Linux kernel, the following vulnerability has been resolved: fbdev: pxafb: Fix possible use after free in pxafb_task() In the pxafb_probe function, it calls the pxafb_init_fbinfo function, after which &fbi->task is associated with pxafb_task. Moreover, within this pxafb_init_fbinfo function, the pxafb_blank function within the &pxafb_ops struct is capable of scheduling work. If we remove the module which will call pxafb_remove to make cleanup, it will call unregister_framebuffer function which can call do_unregister_framebuffer to free fbi->fb through put_fb_info(fb_info), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | pxafb_task pxafb_remove | unregister_framebuffer(info) | do_unregister_framebuffer(fb_info) | put_fb_info(fb_info) | // free fbi->fb | set_ctrlr_state(fbi, state) | __pxafb_lcd_power(fbi, 0) | fbi->lcd_power(on, &fbi->fb.var) | //use fbi->fb Fix it by ensuring that the work is canceled before proceeding with the cleanup in pxafb_remove. Note that only root user can remove the driver at runtime. |
| CVE-2024-49923 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Pass non-null to dcn20_validate_apply_pipe_split_flags [WHAT & HOW] "dcn20_validate_apply_pipe_split_flags" dereferences merge, and thus it cannot be a null pointer. Let's pass a valid pointer to avoid null dereference. This fixes 2 FORWARD_NULL issues reported by Coverity. |
| CVE-2024-49922 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before using them [WHAT & HOW] These pointers are null checked previously in the same function, indicating they might be null as reported by Coverity. As a result, they need to be checked when used again. This fixes 3 FORWARD_NULL issue reported by Coverity. |
| CVE-2024-49921 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before used [WHAT & HOW] Poniters, such as dc->clk_mgr, are null checked previously in the same function, so Coverity warns "implies that "dc->clk_mgr" might be null". As a result, these pointers need to be checked when used again. This fixes 10 FORWARD_NULL issues reported by Coverity. |
| CVE-2024-49920 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before multiple uses [WHAT & HOW] Poniters, such as stream_enc and dc->bw_vbios, are null checked previously in the same function, so Coverity warns "implies that stream_enc and dc->bw_vbios might be null". They are used multiple times in the subsequent code and need to be checked. This fixes 10 FORWARD_NULL issues reported by Coverity. |
| CVE-2024-49919 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for head_pipe in dcn201_acquire_free_pipe_for_layer This commit addresses a potential null pointer dereference issue in the `dcn201_acquire_free_pipe_for_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010) |
| CVE-2024-49918 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for head_pipe in dcn32_acquire_idle_pipe_for_head_pipe_in_layer This commit addresses a potential null pointer dereference issue in the `dcn32_acquire_idle_pipe_for_head_pipe_in_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c:2690 dcn32_acquire_idle_pipe_for_head_pipe_in_layer() error: we previously assumed 'head_pipe' could be null (see line 2681) |
| CVE-2024-49917 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for clk_mgr and clk_mgr->funcs in dcn30_init_hw This commit addresses a potential null pointer dereference issue in the `dcn30_init_hw` function. The issue could occur when `dc->clk_mgr` or `dc->clk_mgr->funcs` is null. The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is not null before accessing its functions. This prevents a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:789 dcn30_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 628) |
| CVE-2024-49916 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for clk_mgr and clk_mgr->funcs in dcn401_init_hw This commit addresses a potential null pointer dereference issue in the `dcn401_init_hw` function. The issue could occur when `dc->clk_mgr` or `dc->clk_mgr->funcs` is null. The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is not null before accessing its functions. This prevents a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn401/dcn401_hwseq.c:416 dcn401_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 225) |
| CVE-2024-49915 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for clk_mgr in dcn32_init_hw This commit addresses a potential null pointer dereference issue in the `dcn32_init_hw` function. The issue could occur when `dc->clk_mgr` is null. The fix adds a check to ensure `dc->clk_mgr` is not null before accessing its functions. This prevents a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn32/dcn32_hwseq.c:961 dcn32_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 782) |
| CVE-2024-49914 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for pipe_ctx->plane_state in dcn20_program_pipe This commit addresses a null pointer dereference issue in the `dcn20_program_pipe` function. The issue could occur when `pipe_ctx->plane_state` is null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null before accessing. This prevents a null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn20/dcn20_hwseq.c:1925 dcn20_program_pipe() error: we previously assumed 'pipe_ctx->plane_state' could be null (see line 1877) |
| CVE-2024-49913 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for top_pipe_to_program in commit_planes_for_stream This commit addresses a null pointer dereference issue in the `commit_planes_for_stream` function at line 4140. The issue could occur when `top_pipe_to_program` is null. The fix adds a check to ensure `top_pipe_to_program` is not null before accessing its stream_res. This prevents a null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4140 commit_planes_for_stream() error: we previously assumed 'top_pipe_to_program' could be null (see line 3906) |
| CVE-2024-49912 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Handle null 'stream_status' in 'planes_changed_for_existing_stream' This commit adds a null check for 'stream_status' in the function 'planes_changed_for_existing_stream'. Previously, the code assumed 'stream_status' could be null, but did not handle the case where it was actually null. This could lead to a null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:3784 planes_changed_for_existing_stream() error: we previously assumed 'stream_status' could be null (see line 3774) |
| CVE-2024-49911 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for function pointer in dcn20_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn20_set_output_transfer_func function. Previously, set_output_gamma was being checked for null at line 1030, but then it was being dereferenced without any null check at line 1048. This could potentially lead to a null pointer dereference error if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma at line 1048. |
| CVE-2024-49910 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for function pointer in dcn401_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn401_set_output_transfer_func function. Previously, set_output_gamma was being checked for null, but then it was being dereferenced without any null check. This could lead to a null pointer dereference if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma. |
| CVE-2024-49909 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for function pointer in dcn32_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn32_set_output_transfer_func function. Previously, set_output_gamma was being checked for null, but then it was being dereferenced without any null check. This could lead to a null pointer dereference if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma. |
| CVE-2024-49908 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for 'afb' in amdgpu_dm_update_cursor (v2) This commit adds a null check for the 'afb' variable in the amdgpu_dm_update_cursor function. Previously, 'afb' was assumed to be null at line 8388, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Changes since v1: - Moved the null check for 'afb' to the line where 'afb' is used. (Alex) Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8433 amdgpu_dm_update_cursor() error: we previously assumed 'afb' could be null (see line 8388) |
| CVE-2024-49907 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before using dc->clk_mgr [WHY & HOW] dc->clk_mgr is null checked previously in the same function, indicating it might be null. Passing "dc" to "dc->hwss.apply_idle_power_optimizations", which dereferences null "dc->clk_mgr". (The function pointer resolves to "dcn35_apply_idle_power_optimizations".) This fixes 1 FORWARD_NULL issue reported by Coverity. |
| CVE-2024-49906 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointer before try to access it [why & how] Change the order of the pipe_ctx->plane_state check to ensure that plane_state is not null before accessing it. |
| CVE-2024-49905 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for 'afb' in amdgpu_dm_plane_handle_cursor_update (v2) This commit adds a null check for the 'afb' variable in the amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was assumed to be null, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Changes since v1: - Moved the null check for 'afb' to the line where 'afb' is used. (Alex) Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252) |
| CVE-2024-49904 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add list empty check to avoid null pointer issue Add list empty check to avoid null pointer issues in some corner cases. - list_for_each_entry_safe() |
| CVE-2024-49903 | In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uaf in dbFreeBits [syzbot reported] ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 Read of size 8 at addr ffff8880229254b0 by task syz-executor357/5216 CPU: 0 UID: 0 PID: 5216 Comm: syz-executor357 Not tainted 6.11.0-rc3-syzkaller-00156-gd7a5aa4b3c00 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __mutex_lock_common kernel/locking/mutex.c:587 [inline] __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 dbFreeBits+0x7ea/0xd90 fs/jfs/jfs_dmap.c:2390 dbFreeDmap fs/jfs/jfs_dmap.c:2089 [inline] dbFree+0x35b/0x680 fs/jfs/jfs_dmap.c:409 dbDiscardAG+0x8a9/0xa20 fs/jfs/jfs_dmap.c:1650 jfs_ioc_trim+0x433/0x670 fs/jfs/jfs_discard.c:100 jfs_ioctl+0x2d0/0x3e0 fs/jfs/ioctl.c:131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 Freed by task 5218: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kfree+0x149/0x360 mm/slub.c:4594 dbUnmount+0x11d/0x190 fs/jfs/jfs_dmap.c:278 jfs_mount_rw+0x4ac/0x6a0 fs/jfs/jfs_mount.c:247 jfs_remount+0x3d1/0x6b0 fs/jfs/super.c:454 reconfigure_super+0x445/0x880 fs/super.c:1083 vfs_cmd_reconfigure fs/fsopen.c:263 [inline] vfs_fsconfig_locked fs/fsopen.c:292 [inline] __do_sys_fsconfig fs/fsopen.c:473 [inline] __se_sys_fsconfig+0xb6e/0xf80 fs/fsopen.c:345 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Analysis] There are two paths (dbUnmount and jfs_ioc_trim) that generate race condition when accessing bmap, which leads to the occurrence of uaf. Use the lock s_umount to synchronize them, in order to avoid uaf caused by race condition. |
| CVE-2024-49902 | In the Linux kernel, the following vulnerability has been resolved: jfs: check if leafidx greater than num leaves per dmap tree syzbot report a out of bounds in dbSplit, it because dmt_leafidx greater than num leaves per dmap tree, add a checking for dmt_leafidx in dbFindLeaf. Shaggy: Modified sanity check to apply to control pages as well as leaf pages. |
| CVE-2024-49901 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: Assign msm_gpu->pdev earlier to avoid nullptrs There are some cases, such as the one uncovered by Commit 46d4efcccc68 ("drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails") where msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL); is called on gpu->pdev == NULL, as the GPU device has not been fully initialized yet. Turns out that there's more than just the aforementioned path that causes this to happen (e.g. the case when there's speedbin data in the catalog, but opp-supported-hw is missing in DT). Assigning msm_gpu->pdev earlier seems like the least painful solution to this, therefore do so. Patchwork: https://patchwork.freedesktop.org/patch/602742/ |
| CVE-2024-49900 | In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uninit-value access of new_ea in ea_buffer syzbot reports that lzo1x_1_do_compress is using uninit-value: ===================================================== BUG: KMSAN: uninit-value in lzo1x_1_do_compress+0x19f9/0x2510 lib/lzo/lzo1x_compress.c:178 ... Uninit was stored to memory at: ea_put fs/jfs/xattr.c:639 [inline] ... Local variable ea_buf created at: __jfs_setxattr+0x5d/0x1ae0 fs/jfs/xattr.c:662 __jfs_xattr_set+0xe6/0x1f0 fs/jfs/xattr.c:934 ===================================================== The reason is ea_buf->new_ea is not initialized properly. Fix this by using memset to empty its content at the beginning in ea_get(). |
| CVE-2024-49899 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize denominators' default to 1 [WHAT & HOW] Variables used as denominators and maybe not assigned to other values, should not be 0. Change their default to 1 so they are never 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. |
| CVE-2024-49898 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null-initialized variables [WHAT & HOW] drr_timing and subvp_pipe are initialized to null and they are not always assigned new values. It is necessary to check for null before dereferencing. This fixes 2 FORWARD_NULL issues reported by Coverity. |
| CVE-2024-49897 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check phantom_stream before it is used dcn32_enable_phantom_stream can return null, so returned value must be checked before used. This fixes 1 NULL_RETURNS issue reported by Coverity. |
| CVE-2024-49896 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check stream before comparing them [WHAT & HOW] amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is necessary to check for null before dereferencing them. This fixes 1 FORWARD_NULL issue reported by Coverity. |
| CVE-2024-49895 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in DCN30 degamma hardware format translation This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max |
| CVE-2024-49894 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in degamma hardware format translation Fixes index out of bounds issue in `cm_helper_translate_curve_to_degamma_hw_format` function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max |
| CVE-2024-49893 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check stream_status before it is used [WHAT & HOW] dc_state_get_stream_status can return null, and therefore null must be checked before stream_status is used. This fixes 1 NULL_RETURNS issue reported by Coverity. |
| CVE-2024-49892 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize get_bytes_per_element's default to 1 Variables, used as denominators and maybe not assigned to other values, should not be 0. bytes_per_element_y & bytes_per_element_c are initialized by get_bytes_per_element() which should never return 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. |
| CVE-2024-49891 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Validate hdwq pointers before dereferencing in reset/errata paths When the HBA is undergoing a reset or is handling an errata event, NULL ptr dereference crashes may occur in routines such as lpfc_sli_flush_io_rings(), lpfc_dev_loss_tmo_callbk(), or lpfc_abort_handler(). Add NULL ptr checks before dereferencing hdwq pointers that may have been freed due to operations colliding with a reset or errata event handler. |
| CVE-2024-49890 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: ensure the fw_info is not null before using it This resolves the dereference null return value warning reported by Coverity. |
| CVE-2024-49889 | In the Linux kernel, the following vulnerability has been resolved: ext4: avoid use-after-free in ext4_ext_show_leaf() In ext4_find_extent(), path may be freed by error or be reallocated, so using a previously saved *ppath may have been freed and thus may trigger use-after-free, as follows: ext4_split_extent path = *ppath; ext4_split_extent_at(ppath) path = ext4_find_extent(ppath) ext4_split_extent_at(ppath) // ext4_find_extent fails to free path // but zeroout succeeds ext4_ext_show_leaf(inode, path) eh = path[depth].p_hdr // path use-after-free !!! Similar to ext4_split_extent_at(), we use *ppath directly as an input to ext4_ext_show_leaf(). Fix a spelling error by the way. Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly. This issue is triggered only when EXT_DEBUG is defined and therefore does not affect functionality. |
| CVE-2024-49888 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a sdiv overflow issue Zac Ecob reported a problem where a bpf program may cause kernel crash due to the following error: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI The failure is due to the below signed divide: LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808. LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808, but it is impossible since for 64-bit system, the maximum positive number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is LLONG_MIN. Further investigation found all the following sdiv/smod cases may trigger an exception when bpf program is running on x86_64 platform: - LLONG_MIN/-1 for 64bit operation - INT_MIN/-1 for 32bit operation - LLONG_MIN%-1 for 64bit operation - INT_MIN%-1 for 32bit operation where -1 can be an immediate or in a register. On arm64, there are no exceptions: - LLONG_MIN/-1 = LLONG_MIN - INT_MIN/-1 = INT_MIN - LLONG_MIN%-1 = 0 - INT_MIN%-1 = 0 where -1 can be an immediate or in a register. Insn patching is needed to handle the above cases and the patched codes produced results aligned with above arm64 result. The below are pseudo codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0 and the divisor is stored in a register. sdiv: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L2 if tmp == 0 goto L1 rY = 0 L1: rY = -rY; goto L3 L2: rY /= rX L3: smod: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L1 if tmp == 1 (is64 ? goto L2 : goto L3) rY = 0; goto L2 L1: rY %= rX L2: goto L4 // only when !is64 L3: wY = wY // only when !is64 L4: [1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/ |
| CVE-2024-49887 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to don't panic system for no free segment fault injection f2fs: fix to don't panic system for no free segment fault injection syzbot reports a f2fs bug as below: F2FS-fs (loop0): inject no free segment in get_new_segment of __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167 F2FS-fs (loop0): Stopped filesystem due to reason: 7 ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2748! CPU: 0 UID: 0 PID: 5109 Comm: syz-executor304 Not tainted 6.11.0-rc6-syzkaller-00363-g89f5e14d05b4 #0 RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline] RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836 Call Trace: __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167 f2fs_allocate_new_section fs/f2fs/segment.c:3181 [inline] f2fs_allocate_pinning_section+0xfa/0x4e0 fs/f2fs/segment.c:3195 f2fs_expand_inode_data+0x5d6/0xbb0 fs/f2fs/file.c:1799 f2fs_fallocate+0x448/0x960 fs/f2fs/file.c:1903 vfs_fallocate+0x553/0x6c0 fs/open.c:334 do_vfs_ioctl+0x2592/0x2e50 fs/ioctl.c:886 __do_sys_ioctl fs/ioctl.c:905 [inline] __se_sys_ioctl+0x81/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline] RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836 The root cause is when we inject no free segment fault into f2fs, we should not panic system, fix it. |
| CVE-2024-49886 | In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds". kasan report: [ 19.411889] ================================================================== [ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113 [ 19.417368] [ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10 [ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 19.422687] Call Trace: [ 19.424091] <TASK> [ 19.425448] dump_stack_lvl+0x5d/0x80 [ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.428694] print_report+0x19d/0x52e [ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.433539] kasan_report+0xf0/0x170 [ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10 [ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common] [ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common] [ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360 [ 19.444797] cpuhp_invoke_callback+0x221/0xec0 [ 19.446337] cpuhp_thread_fun+0x21b/0x610 [ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10 [ 19.449354] smpboot_thread_fn+0x2e7/0x6e0 [ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 19.452405] kthread+0x29c/0x350 [ 19.453817] ? __pfx_kthread+0x10/0x10 [ 19.455253] ret_from_fork+0x31/0x70 [ 19.456685] ? __pfx_kthread+0x10/0x10 [ 19.458114] ret_from_fork_asm+0x1a/0x30 [ 19.459573] </TASK> [ 19.460853] [ 19.462055] Allocated by task 1198: [ 19.463410] kasan_save_stack+0x30/0x50 [ 19.464788] kasan_save_track+0x14/0x30 [ 19.466139] __kasan_kmalloc+0xaa/0xb0 [ 19.467465] __kmalloc+0x1cd/0x470 [ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common] [ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr] [ 19.471670] do_one_initcall+0xa4/0x380 [ 19.472903] do_init_module+0x238/0x760 [ 19.474105] load_module+0x5239/0x6f00 [ 19.475285] init_module_from_file+0xd1/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.478920] do_syscall_64+0x82/0x160 [ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 19.481292] [ 19.482205] The buggy address belongs to the object at ffff888829e65000 which belongs to the cache kmalloc-512 of size 512 [ 19.484818] The buggy address is located 0 bytes to the right of allocated 512-byte region [ffff888829e65000, ffff888829e65200) [ 19.487447] [ 19.488328] The buggy address belongs to the physical page: [ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60 [ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [ 19.493914] page_type: 0xffffffff() [ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff [ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000 [ 19.503784] page dumped because: k ---truncated--- |
| CVE-2024-49885 | In the Linux kernel, the following vulnerability has been resolved: mm, slub: avoid zeroing kmalloc redzone Since commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested"), setting orig_size treats the wasted space (object_size - orig_size) as a redzone. However with init_on_free=1 we clear the full object->size, including the redzone. Additionally we clear the object metadata, including the stored orig_size, making it zero, which makes check_object() treat the whole object as a redzone. These issues lead to the following BUG report with "slub_debug=FUZ init_on_free=1": [ 0.000000] ============================================================================= [ 0.000000] BUG kmalloc-8 (Not tainted): kmalloc Redzone overwritten [ 0.000000] ----------------------------------------------------------------------------- [ 0.000000] [ 0.000000] 0xffff000010032858-0xffff00001003285f @offset=2136. First byte 0x0 instead of 0xcc [ 0.000000] FIX kmalloc-8: Restoring kmalloc Redzone 0xffff000010032858-0xffff00001003285f=0xcc [ 0.000000] Slab 0xfffffdffc0400c80 objects=36 used=23 fp=0xffff000010032a18 flags=0x3fffe0000000200(workingset|node=0|zone=0|lastcpupid=0x1ffff) [ 0.000000] Object 0xffff000010032858 @offset=2136 fp=0xffff0000100328c8 [ 0.000000] [ 0.000000] Redzone ffff000010032850: cc cc cc cc cc cc cc cc ........ [ 0.000000] Object ffff000010032858: cc cc cc cc cc cc cc cc ........ [ 0.000000] Redzone ffff000010032860: cc cc cc cc cc cc cc cc ........ [ 0.000000] Padding ffff0000100328b4: 00 00 00 00 00 00 00 00 00 00 00 00 ............ [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.11.0-rc3-next-20240814-00004-g61844c55c3f4 #144 [ 0.000000] Hardware name: NXP i.MX95 19X19 board (DT) [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x90/0xe8 [ 0.000000] show_stack+0x18/0x24 [ 0.000000] dump_stack_lvl+0x74/0x8c [ 0.000000] dump_stack+0x18/0x24 [ 0.000000] print_trailer+0x150/0x218 [ 0.000000] check_object+0xe4/0x454 [ 0.000000] free_to_partial_list+0x2f8/0x5ec To address the issue, use orig_size to clear the used area. And restore the value of orig_size after clear the remaining area. When CONFIG_SLUB_DEBUG not defined, (get_orig_size()' directly returns s->object_size. So when using memset to init the area, the size can simply be orig_size, as orig_size returns object_size when CONFIG_SLUB_DEBUG not enabled. And orig_size can never be bigger than object_size. |
| CVE-2024-49884 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-use-after-free in ext4_split_extent_at() We hit the following use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ext4_split_extent_at+0xba8/0xcc0 Read of size 2 at addr ffff88810548ed08 by task kworker/u20:0/40 CPU: 0 PID: 40 Comm: kworker/u20:0 Not tainted 6.9.0-dirty #724 Call Trace: <TASK> kasan_report+0x93/0xc0 ext4_split_extent_at+0xba8/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Allocated by task 40: __kmalloc_noprof+0x1ac/0x480 ext4_find_extent+0xf3b/0x1e70 ext4_ext_map_blocks+0x188/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Freed by task 40: kfree+0xf1/0x2b0 ext4_find_extent+0xa71/0x1e70 ext4_ext_insert_extent+0xa22/0x3260 ext4_split_extent_at+0x3ef/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ================================================================== The flow of issue triggering is as follows: ext4_split_extent_at path = *ppath ext4_ext_insert_extent(ppath) ext4_ext_create_new_leaf(ppath) ext4_find_extent(orig_path) path = *orig_path read_extent_tree_block // return -ENOMEM or -EIO ext4_free_ext_path(path) kfree(path) *orig_path = NULL a. If err is -ENOMEM: ext4_ext_dirty(path + path->p_depth) // path use-after-free !!! b. If err is -EIO and we have EXT_DEBUG defined: ext4_ext_show_leaf(path) eh = path[depth].p_hdr // path also use-after-free !!! So when trying to zeroout or fix the extent length, call ext4_find_extent() to update the path. In addition we use *ppath directly as an ext4_ext_show_leaf() input to avoid possible use-after-free when EXT_DEBUG is defined, and to avoid unnecessary path updates. |
| CVE-2024-49883 | In the Linux kernel, the following vulnerability has been resolved: ext4: aovid use-after-free in ext4_ext_insert_extent() As Ojaswin mentioned in Link, in ext4_ext_insert_extent(), if the path is reallocated in ext4_ext_create_new_leaf(), we'll use the stale path and cause UAF. Below is a sample trace with dummy values: ext4_ext_insert_extent path = *ppath = 2000 ext4_ext_create_new_leaf(ppath) ext4_find_extent(ppath) path = *ppath = 2000 if (depth > path[0].p_maxdepth) kfree(path = 2000); *ppath = path = NULL; path = kcalloc() = 3000 *ppath = 3000; return path; /* here path is still 2000, UAF! */ eh = path[depth].p_hdr ================================================================== BUG: KASAN: slab-use-after-free in ext4_ext_insert_extent+0x26d4/0x3330 Read of size 8 at addr ffff8881027bf7d0 by task kworker/u36:1/179 CPU: 3 UID: 0 PID: 179 Comm: kworker/u6:1 Not tainted 6.11.0-rc2-dirty #866 Call Trace: <TASK> ext4_ext_insert_extent+0x26d4/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 [...] Allocated by task 179: ext4_find_extent+0x81c/0x1f70 ext4_ext_map_blocks+0x146/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] Freed by task 179: kfree+0xcb/0x240 ext4_find_extent+0x7c0/0x1f70 ext4_ext_insert_extent+0xa26/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] ================================================================== So use *ppath to update the path to avoid the above problem. |
| CVE-2024-49882 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix double brelse() the buffer of the extents path In ext4_ext_try_to_merge_up(), set path[1].p_bh to NULL after it has been released, otherwise it may be released twice. An example of what triggers this is as follows: split2 map split1 |--------|-------|--------| ext4_ext_map_blocks ext4_ext_handle_unwritten_extents ext4_split_convert_extents // path->p_depth == 0 ext4_split_extent // 1. do split1 ext4_split_extent_at |ext4_ext_insert_extent | ext4_ext_create_new_leaf | ext4_ext_grow_indepth | le16_add_cpu(&neh->eh_depth, 1) | ext4_find_extent | // return -ENOMEM |// get error and try zeroout |path = ext4_find_extent | path->p_depth = 1 |ext4_ext_try_to_merge | ext4_ext_try_to_merge_up | path->p_depth = 0 | brelse(path[1].p_bh) ---> not set to NULL here |// zeroout success // 2. update path ext4_find_extent // 3. do split2 ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf ext4_ext_grow_indepth le16_add_cpu(&neh->eh_depth, 1) ext4_find_extent path[0].p_bh = NULL; path->p_depth = 1 read_extent_tree_block ---> return err // path[1].p_bh is still the old value ext4_free_ext_path ext4_ext_drop_refs // path->p_depth == 1 brelse(path[1].p_bh) ---> brelse a buffer twice Finally got the following WARRNING when removing the buffer from lru: ============================================ VFS: brelse: Trying to free free buffer WARNING: CPU: 2 PID: 72 at fs/buffer.c:1241 __brelse+0x58/0x90 CPU: 2 PID: 72 Comm: kworker/u19:1 Not tainted 6.9.0-dirty #716 RIP: 0010:__brelse+0x58/0x90 Call Trace: <TASK> __find_get_block+0x6e7/0x810 bdev_getblk+0x2b/0x480 __ext4_get_inode_loc+0x48a/0x1240 ext4_get_inode_loc+0xb2/0x150 ext4_reserve_inode_write+0xb7/0x230 __ext4_mark_inode_dirty+0x144/0x6a0 ext4_ext_insert_extent+0x9c8/0x3230 ext4_ext_map_blocks+0xf45/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ============================================ |
| CVE-2024-49881 | In the Linux kernel, the following vulnerability has been resolved: ext4: update orig_path in ext4_find_extent() In ext4_find_extent(), if the path is not big enough, we free it and set *orig_path to NULL. But after reallocating and successfully initializing the path, we don't update *orig_path, in which case the caller gets a valid path but a NULL ppath, and this may cause a NULL pointer dereference or a path memory leak. For example: ext4_split_extent path = *ppath = 2000 ext4_find_extent if (depth > path[0].p_maxdepth) kfree(path = 2000); *orig_path = path = NULL; path = kcalloc() = 3000 ext4_split_extent_at(*ppath = NULL) path = *ppath; ex = path[depth].p_ext; // NULL pointer dereference! ================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000010 CPU: 6 UID: 0 PID: 576 Comm: fsstress Not tainted 6.11.0-rc2-dirty #847 RIP: 0010:ext4_split_extent_at+0x6d/0x560 Call Trace: <TASK> ext4_split_extent.isra.0+0xcb/0x1b0 ext4_ext_convert_to_initialized+0x168/0x6c0 ext4_ext_handle_unwritten_extents+0x325/0x4d0 ext4_ext_map_blocks+0x520/0xdb0 ext4_map_blocks+0x2b0/0x690 ext4_iomap_begin+0x20e/0x2c0 [...] ================================================================== Therefore, *orig_path is updated when the extent lookup succeeds, so that the caller can safely use path or *ppath. |
| CVE-2024-49880 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix off by one issue in alloc_flex_gd() Wesley reported an issue: ================================================================== EXT4-fs (dm-5): resizing filesystem from 7168 to 786432 blocks ------------[ cut here ]------------ kernel BUG at fs/ext4/resize.c:324! CPU: 9 UID: 0 PID: 3576 Comm: resize2fs Not tainted 6.11.0+ #27 RIP: 0010:ext4_resize_fs+0x1212/0x12d0 Call Trace: __ext4_ioctl+0x4e0/0x1800 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0x99/0xd0 x64_sys_call+0x1206/0x20d0 do_syscall_64+0x72/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== While reviewing the patch, Honza found that when adjusting resize_bg in alloc_flex_gd(), it was possible for flex_gd->resize_bg to be bigger than flexbg_size. The reproduction of the problem requires the following: o_group = flexbg_size * 2 * n; o_size = (o_group + 1) * group_size; n_group: [o_group + flexbg_size, o_group + flexbg_size * 2) o_size = (n_group + 1) * group_size; Take n=0,flexbg_size=16 as an example: last:15 |o---------------|--------------n-| o_group:0 resize to n_group:30 The corresponding reproducer is: img=test.img rm -f $img truncate -s 600M $img mkfs.ext4 -F $img -b 1024 -G 16 8M dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 248M Delete the problematic plus 1 to fix the issue, and add a WARN_ON_ONCE() to prevent the issue from happening again. [ Note: another reproucer which this commit fixes is: img=test.img rm -f $img truncate -s 25MiB $img mkfs.ext4 -b 4096 -E nodiscard,lazy_itable_init=0,lazy_journal_init=0 $img truncate -s 3GiB $img dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 3G umount $dev losetup -d $dev -- TYT ] |
| CVE-2024-49879 | In the Linux kernel, the following vulnerability has been resolved: drm: omapdrm: Add missing check for alloc_ordered_workqueue As it may return NULL pointer and cause NULL pointer dereference. Add check for the return value of alloc_ordered_workqueue. |
| CVE-2024-49878 | In the Linux kernel, the following vulnerability has been resolved: resource: fix region_intersects() vs add_memory_driver_managed() On a system with CXL memory, the resource tree (/proc/iomem) related to CXL memory may look like something as follows. 490000000-50fffffff : CXL Window 0 490000000-50fffffff : region0 490000000-50fffffff : dax0.0 490000000-50fffffff : System RAM (kmem) Because drivers/dax/kmem.c calls add_memory_driver_managed() during onlining CXL memory, which makes "System RAM (kmem)" a descendant of "CXL Window X". This confuses region_intersects(), which expects all "System RAM" resources to be at the top level of iomem_resource. This can lead to bugs. For example, when the following command line is executed to write some memory in CXL memory range via /dev/mem, $ dd if=data of=/dev/mem bs=$((1 << 10)) seek=$((0x490000000 >> 10)) count=1 dd: error writing '/dev/mem': Bad address 1+0 records in 0+0 records out 0 bytes copied, 0.0283507 s, 0.0 kB/s the command fails as expected. However, the error code is wrong. It should be "Operation not permitted" instead of "Bad address". More seriously, the /dev/mem permission checking in devmem_is_allowed() passes incorrectly. Although the accessing is prevented later because ioremap() isn't allowed to map system RAM, it is a potential security issue. During command executing, the following warning is reported in the kernel log for calling ioremap() on system RAM. ioremap on RAM at 0x0000000490000000 - 0x0000000490000fff WARNING: CPU: 2 PID: 416 at arch/x86/mm/ioremap.c:216 __ioremap_caller.constprop.0+0x131/0x35d Call Trace: memremap+0xcb/0x184 xlate_dev_mem_ptr+0x25/0x2f write_mem+0x94/0xfb vfs_write+0x128/0x26d ksys_write+0xac/0xfe do_syscall_64+0x9a/0xfd entry_SYSCALL_64_after_hwframe+0x4b/0x53 The details of command execution process are as follows. In the above resource tree, "System RAM" is a descendant of "CXL Window 0" instead of a top level resource. So, region_intersects() will report no System RAM resources in the CXL memory region incorrectly, because it only checks the top level resources. Consequently, devmem_is_allowed() will return 1 (allow access via /dev/mem) for CXL memory region incorrectly. Fortunately, ioremap() doesn't allow to map System RAM and reject the access. So, region_intersects() needs to be fixed to work correctly with the resource tree with "System RAM" not at top level as above. To fix it, if we found a unmatched resource in the top level, we will continue to search matched resources in its descendant resources. So, we will not miss any matched resources in resource tree anymore. In the new implementation, an example resource tree |------------- "CXL Window 0" ------------| |-- "System RAM" --| will behave similar as the following fake resource tree for region_intersects(, IORESOURCE_SYSTEM_RAM, ), |-- "System RAM" --||-- "CXL Window 0a" --| Where "CXL Window 0a" is part of the original "CXL Window 0" that isn't covered by "System RAM". |
| CVE-2024-49877 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix possible null-ptr-deref in ocfs2_set_buffer_uptodate When doing cleanup, if flags without OCFS2_BH_READAHEAD, it may trigger NULL pointer dereference in the following ocfs2_set_buffer_uptodate() if bh is NULL. |
| CVE-2024-49876 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: fix UAF around queue destruction We currently do stuff like queuing the final destruction step on a random system wq, which will outlive the driver instance. With bad timing we can teardown the driver with one or more work workqueue still being alive leading to various UAF splats. Add a fini step to ensure user queues are properly torn down. At this point GuC should already be nuked so queue itself should no longer be referenced from hw pov. v2 (Matt B) - Looks much safer to use a waitqueue and then just wait for the xa_array to become empty before triggering the drain. (cherry picked from commit 861108666cc0e999cffeab6aff17b662e68774e3) |
| CVE-2024-49875 | In the Linux kernel, the following vulnerability has been resolved: nfsd: map the EBADMSG to nfserr_io to avoid warning Ext4 will throw -EBADMSG through ext4_readdir when a checksum error occurs, resulting in the following WARNING. Fix it by mapping EBADMSG to nfserr_io. nfsd_buffered_readdir iterate_dir // -EBADMSG -74 ext4_readdir // .iterate_shared ext4_dx_readdir ext4_htree_fill_tree htree_dirblock_to_tree ext4_read_dirblock __ext4_read_dirblock ext4_dirblock_csum_verify warn_no_space_for_csum __warn_no_space_for_csum return ERR_PTR(-EFSBADCRC) // -EBADMSG -74 nfserrno // WARNING [ 161.115610] ------------[ cut here ]------------ [ 161.116465] nfsd: non-standard errno: -74 [ 161.117315] WARNING: CPU: 1 PID: 780 at fs/nfsd/nfsproc.c:878 nfserrno+0x9d/0xd0 [ 161.118596] Modules linked in: [ 161.119243] CPU: 1 PID: 780 Comm: nfsd Not tainted 5.10.0-00014-g79679361fd5d #138 [ 161.120684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qe mu.org 04/01/2014 [ 161.123601] RIP: 0010:nfserrno+0x9d/0xd0 [ 161.124676] Code: 0f 87 da 30 dd 00 83 e3 01 b8 00 00 00 05 75 d7 44 89 ee 48 c7 c7 c0 57 24 98 89 44 24 04 c6 05 ce 2b 61 03 01 e8 99 20 d8 00 <0f> 0b 8b 44 24 04 eb b5 4c 89 e6 48 c7 c7 a0 6d a4 99 e8 cc 15 33 [ 161.127797] RSP: 0018:ffffc90000e2f9c0 EFLAGS: 00010286 [ 161.128794] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 161.130089] RDX: 1ffff1103ee16f6d RSI: 0000000000000008 RDI: fffff520001c5f2a [ 161.131379] RBP: 0000000000000022 R08: 0000000000000001 R09: ffff8881f70c1827 [ 161.132664] R10: ffffed103ee18304 R11: 0000000000000001 R12: 0000000000000021 [ 161.133949] R13: 00000000ffffffb6 R14: ffff8881317c0000 R15: ffffc90000e2fbd8 [ 161.135244] FS: 0000000000000000(0000) GS:ffff8881f7080000(0000) knlGS:0000000000000000 [ 161.136695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 161.137761] CR2: 00007fcaad70b348 CR3: 0000000144256006 CR4: 0000000000770ee0 [ 161.139041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 161.140291] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 161.141519] PKRU: 55555554 [ 161.142076] Call Trace: [ 161.142575] ? __warn+0x9b/0x140 [ 161.143229] ? nfserrno+0x9d/0xd0 [ 161.143872] ? report_bug+0x125/0x150 [ 161.144595] ? handle_bug+0x41/0x90 [ 161.145284] ? exc_invalid_op+0x14/0x70 [ 161.146009] ? asm_exc_invalid_op+0x12/0x20 [ 161.146816] ? nfserrno+0x9d/0xd0 [ 161.147487] nfsd_buffered_readdir+0x28b/0x2b0 [ 161.148333] ? nfsd4_encode_dirent_fattr+0x380/0x380 [ 161.149258] ? nfsd_buffered_filldir+0xf0/0xf0 [ 161.150093] ? wait_for_concurrent_writes+0x170/0x170 [ 161.151004] ? generic_file_llseek_size+0x48/0x160 [ 161.151895] nfsd_readdir+0x132/0x190 [ 161.152606] ? nfsd4_encode_dirent_fattr+0x380/0x380 [ 161.153516] ? nfsd_unlink+0x380/0x380 [ 161.154256] ? override_creds+0x45/0x60 [ 161.155006] nfsd4_encode_readdir+0x21a/0x3d0 [ 161.155850] ? nfsd4_encode_readlink+0x210/0x210 [ 161.156731] ? write_bytes_to_xdr_buf+0x97/0xe0 [ 161.157598] ? __write_bytes_to_xdr_buf+0xd0/0xd0 [ 161.158494] ? lock_downgrade+0x90/0x90 [ 161.159232] ? nfs4svc_decode_voidarg+0x10/0x10 [ 161.160092] nfsd4_encode_operation+0x15a/0x440 [ 161.160959] nfsd4_proc_compound+0x718/0xe90 [ 161.161818] nfsd_dispatch+0x18e/0x2c0 [ 161.162586] svc_process_common+0x786/0xc50 [ 161.163403] ? nfsd_svc+0x380/0x380 [ 161.164137] ? svc_printk+0x160/0x160 [ 161.164846] ? svc_xprt_do_enqueue.part.0+0x365/0x380 [ 161.165808] ? nfsd_svc+0x380/0x380 [ 161.166523] ? rcu_is_watching+0x23/0x40 [ 161.167309] svc_process+0x1a5/0x200 [ 161.168019] nfsd+0x1f5/0x380 [ 161.168663] ? nfsd_shutdown_threads+0x260/0x260 [ 161.169554] kthread+0x1c4/0x210 [ 161.170224] ? kthread_insert_work_sanity_check+0x80/0x80 [ 161.171246] ret_from_fork+0x1f/0x30 |
| CVE-2024-49874 | In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition In the svc_i3c_master_probe function, &master->hj_work is bound with svc_i3c_master_hj_work, &master->ibi_work is bound with svc_i3c_master_ibi_work. And svc_i3c_master_ibi_work can start the hj_work, svc_i3c_master_irq_handler can start the ibi_work. If we remove the module which will call svc_i3c_master_remove to make cleanup, it will free master->base through i3c_master_unregister while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | svc_i3c_master_hj_work svc_i3c_master_remove | i3c_master_unregister(&master->base)| device_unregister(&master->dev) | device_release | //free master->base | | i3c_master_do_daa(&master->base) | //use master->base Fix it by ensuring that the work is canceled before proceeding with the cleanup in svc_i3c_master_remove. |
| CVE-2024-49873 | In the Linux kernel, the following vulnerability has been resolved: mm/filemap: fix filemap_get_folios_contig THP panic Patch series "memfd-pin huge page fixes". Fix multiple bugs that occur when using memfd_pin_folios with hugetlb pages and THP. The hugetlb bugs only bite when the page is not yet faulted in when memfd_pin_folios is called. The THP bug bites when the starting offset passed to memfd_pin_folios is not huge page aligned. See the commit messages for details. This patch (of 5): memfd_pin_folios on memory backed by THP panics if the requested start offset is not huge page aligned: BUG: kernel NULL pointer dereference, address: 0000000000000036 RIP: 0010:filemap_get_folios_contig+0xdf/0x290 RSP: 0018:ffffc9002092fbe8 EFLAGS: 00010202 RAX: 0000000000000002 RBX: 0000000000000002 RCX: 0000000000000002 The fault occurs here, because xas_load returns a folio with value 2: filemap_get_folios_contig() for (folio = xas_load(&xas); folio && xas.xa_index <= end; folio = xas_next(&xas)) { ... if (!folio_try_get(folio)) <-- BOOM "2" is an xarray sibling entry. We get it because memfd_pin_folios does not round the indices passed to filemap_get_folios_contig to huge page boundaries for THP, so we load from the middle of a huge page range see a sibling. (It does round for hugetlbfs, at the is_file_hugepages test). To fix, if the folio is a sibling, then return the next index as the starting point for the next call to filemap_get_folios_contig. |
| CVE-2024-49872 | In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix memfd_pin_folios alloc race panic If memfd_pin_folios tries to create a hugetlb page, but someone else already did, then folio gets the value -EEXIST here: folio = memfd_alloc_folio(memfd, start_idx); if (IS_ERR(folio)) { ret = PTR_ERR(folio); if (ret != -EEXIST) goto err; then on the next trip through the "while start_idx" loop we panic here: if (folio) { folio_put(folio); To fix, set the folio to NULL on error. |
| CVE-2024-49871 | In the Linux kernel, the following vulnerability has been resolved: Input: adp5589-keys - fix NULL pointer dereference We register a devm action to call adp5589_clear_config() and then pass the i2c client as argument so that we can call i2c_get_clientdata() in order to get our device object. However, i2c_set_clientdata() is only being set at the end of the probe function which means that we'll get a NULL pointer dereference in case the probe function fails early. |
| CVE-2024-49870 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix dentry leak in cachefiles_open_file() A dentry leak may be caused when a lookup cookie and a cull are concurrent: P1 | P2 ----------------------------------------------------------- cachefiles_lookup_cookie cachefiles_look_up_object lookup_one_positive_unlocked // get dentry cachefiles_cull inode->i_flags |= S_KERNEL_FILE; cachefiles_open_file cachefiles_mark_inode_in_use __cachefiles_mark_inode_in_use can_use = false if (!(inode->i_flags & S_KERNEL_FILE)) can_use = true return false return false // Returns an error but doesn't put dentry After that the following WARNING will be triggered when the backend folder is umounted: ================================================================== BUG: Dentry 000000008ad87947{i=7a,n=Dx_1_1.img} still in use (1) [unmount of ext4 sda] WARNING: CPU: 4 PID: 359261 at fs/dcache.c:1767 umount_check+0x5d/0x70 CPU: 4 PID: 359261 Comm: umount Not tainted 6.6.0-dirty #25 RIP: 0010:umount_check+0x5d/0x70 Call Trace: <TASK> d_walk+0xda/0x2b0 do_one_tree+0x20/0x40 shrink_dcache_for_umount+0x2c/0x90 generic_shutdown_super+0x20/0x160 kill_block_super+0x1a/0x40 ext4_kill_sb+0x22/0x40 deactivate_locked_super+0x35/0x80 cleanup_mnt+0x104/0x160 ================================================================== Whether cachefiles_open_file() returns true or false, the reference count obtained by lookup_positive_unlocked() in cachefiles_look_up_object() should be released. Therefore release that reference count in cachefiles_look_up_object() to fix the above issue and simplify the code. |
| CVE-2024-49869 | In the Linux kernel, the following vulnerability has been resolved: btrfs: send: fix buffer overflow detection when copying path to cache entry Starting with commit c0247d289e73 ("btrfs: send: annotate struct name_cache_entry with __counted_by()") we annotated the variable length array "name" from the name_cache_entry structure with __counted_by() to improve overflow detection. However that alone was not correct, because the length of that array does not match the "name_len" field - it matches that plus 1 to include the NUL string terminator, so that makes a fortified kernel think there's an overflow and report a splat like this: strcpy: detected buffer overflow: 20 byte write of buffer size 19 WARNING: CPU: 3 PID: 3310 at __fortify_report+0x45/0x50 CPU: 3 UID: 0 PID: 3310 Comm: btrfs Not tainted 6.11.0-prnet #1 Hardware name: CompuLab Ltd. sbc-ihsw/Intense-PC2 (IPC2), BIOS IPC2_3.330.7 X64 03/15/2018 RIP: 0010:__fortify_report+0x45/0x50 Code: 48 8b 34 (...) RSP: 0018:ffff97ebc0d6f650 EFLAGS: 00010246 RAX: 7749924ef60fa600 RBX: ffff8bf5446a521a RCX: 0000000000000027 RDX: 00000000ffffdfff RSI: ffff97ebc0d6f548 RDI: ffff8bf84e7a1cc8 RBP: ffff8bf548574080 R08: ffffffffa8c40e10 R09: 0000000000005ffd R10: 0000000000000004 R11: ffffffffa8c70e10 R12: ffff8bf551eef400 R13: 0000000000000000 R14: 0000000000000013 R15: 00000000000003a8 FS: 00007fae144de8c0(0000) GS:ffff8bf84e780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fae14691690 CR3: 00000001027a2003 CR4: 00000000001706f0 Call Trace: <TASK> ? __warn+0x12a/0x1d0 ? __fortify_report+0x45/0x50 ? report_bug+0x154/0x1c0 ? handle_bug+0x42/0x70 ? exc_invalid_op+0x1a/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? __fortify_report+0x45/0x50 __fortify_panic+0x9/0x10 __get_cur_name_and_parent+0x3bc/0x3c0 get_cur_path+0x207/0x3b0 send_extent_data+0x709/0x10d0 ? find_parent_nodes+0x22df/0x25d0 ? mas_nomem+0x13/0x90 ? mtree_insert_range+0xa5/0x110 ? btrfs_lru_cache_store+0x5f/0x1e0 ? iterate_extent_inodes+0x52d/0x5a0 process_extent+0xa96/0x11a0 ? __pfx_lookup_backref_cache+0x10/0x10 ? __pfx_store_backref_cache+0x10/0x10 ? __pfx_iterate_backrefs+0x10/0x10 ? __pfx_check_extent_item+0x10/0x10 changed_cb+0x6fa/0x930 ? tree_advance+0x362/0x390 ? memcmp_extent_buffer+0xd7/0x160 send_subvol+0xf0a/0x1520 btrfs_ioctl_send+0x106b/0x11d0 ? __pfx___clone_root_cmp_sort+0x10/0x10 _btrfs_ioctl_send+0x1ac/0x240 btrfs_ioctl+0x75b/0x850 __se_sys_ioctl+0xca/0x150 do_syscall_64+0x85/0x160 ? __count_memcg_events+0x69/0x100 ? handle_mm_fault+0x1327/0x15c0 ? __se_sys_rt_sigprocmask+0xf1/0x180 ? syscall_exit_to_user_mode+0x75/0xa0 ? do_syscall_64+0x91/0x160 ? do_user_addr_fault+0x21d/0x630 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fae145eeb4f Code: 00 48 89 (...) RSP: 002b:00007ffdf1cb09b0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fae145eeb4f RDX: 00007ffdf1cb0ad0 RSI: 0000000040489426 RDI: 0000000000000004 RBP: 00000000000078fe R08: 00007fae144006c0 R09: 00007ffdf1cb0927 R10: 0000000000000008 R11: 0000000000000246 R12: 00007ffdf1cb1ce8 R13: 0000000000000003 R14: 000055c499fab2e0 R15: 0000000000000004 </TASK> Fix this by not storing the NUL string terminator since we don't actually need it for name cache entries, this way "name_len" corresponds to the actual size of the "name" array. This requires marking the "name" array field with __nonstring and using memcpy() instead of strcpy() as recommended by the guidelines at: https://github.com/KSPP/linux/issues/90 |
| CVE-2024-49868 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix a NULL pointer dereference when failed to start a new trasacntion [BUG] Syzbot reported a NULL pointer dereference with the following crash: FAULT_INJECTION: forcing a failure. start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676 prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642 relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678 ... BTRFS info (device loop0): balance: ended with status: -12 Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667] RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926 Call Trace: <TASK> commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496 btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430 del_balance_item fs/btrfs/volumes.c:3678 [inline] reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742 btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [CAUSE] The allocation failure happens at the start_transaction() inside prepare_to_relocate(), and during the error handling we call unset_reloc_control(), which makes fs_info->balance_ctl to be NULL. Then we continue the error path cleanup in btrfs_balance() by calling reset_balance_state() which will call del_balance_item() to fully delete the balance item in the root tree. However during the small window between set_reloc_contrl() and unset_reloc_control(), we can have a subvolume tree update and created a reloc_root for that subvolume. Then we go into the final btrfs_commit_transaction() of del_balance_item(), and into btrfs_update_reloc_root() inside commit_fs_roots(). That function checks if fs_info->reloc_ctl is in the merge_reloc_tree stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer dereference. [FIX] Just add extra check on fs_info->reloc_ctl inside btrfs_update_reloc_root(), before checking fs_info->reloc_ctl->merge_reloc_tree. That DEAD_RELOC_TREE handling is to prevent further modification to the reloc tree during merge stage, but since there is no reloc_ctl at all, we do not need to bother that. |
| CVE-2024-49867 | In the Linux kernel, the following vulnerability has been resolved: btrfs: wait for fixup workers before stopping cleaner kthread during umount During unmount, at close_ctree(), we have the following steps in this order: 1) Park the cleaner kthread - this doesn't destroy the kthread, it basically halts its execution (wake ups against it work but do nothing); 2) We stop the cleaner kthread - this results in freeing the respective struct task_struct; 3) We call btrfs_stop_all_workers() which waits for any jobs running in all the work queues and then free the work queues. Syzbot reported a case where a fixup worker resulted in a crash when doing a delayed iput on its inode while attempting to wake up the cleaner at btrfs_add_delayed_iput(), because the task_struct of the cleaner kthread was already freed. This can happen during unmount because we don't wait for any fixup workers still running before we call kthread_stop() against the cleaner kthread, which stops and free all its resources. Fix this by waiting for any fixup workers at close_ctree() before we call kthread_stop() against the cleaner and run pending delayed iputs. The stack traces reported by syzbot were the following: BUG: KASAN: slab-use-after-free in __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 Read of size 8 at addr ffff8880272a8a18 by task kworker/u8:3/52 CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.12.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: btrfs-fixup btrfs_work_helper Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline] try_to_wake_up+0xb0/0x1480 kernel/sched/core.c:4154 btrfs_writepage_fixup_worker+0xc16/0xdf0 fs/btrfs/inode.c:2842 btrfs_work_helper+0x390/0xc50 fs/btrfs/async-thread.c:314 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 2: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:319 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4086 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4187 alloc_task_struct_node kernel/fork.c:180 [inline] dup_task_struct+0x57/0x8c0 kernel/fork.c:1107 copy_process+0x5d1/0x3d50 kernel/fork.c:2206 kernel_clone+0x223/0x880 kernel/fork.c:2787 kernel_thread+0x1bc/0x240 kernel/fork.c:2849 create_kthread kernel/kthread.c:412 [inline] kthreadd+0x60d/0x810 kernel/kthread.c:765 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 61: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_h ---truncated--- |
| CVE-2024-49866 | In the Linux kernel, the following vulnerability has been resolved: tracing/timerlat: Fix a race during cpuhp processing There is another found exception that the "timerlat/1" thread was scheduled on CPU0, and lead to timer corruption finally: ``` ODEBUG: init active (active state 0) object: ffff888237c2e108 object type: hrtimer hint: timerlat_irq+0x0/0x220 WARNING: CPU: 0 PID: 426 at lib/debugobjects.c:518 debug_print_object+0x7d/0xb0 Modules linked in: CPU: 0 UID: 0 PID: 426 Comm: timerlat/1 Not tainted 6.11.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:debug_print_object+0x7d/0xb0 ... Call Trace: <TASK> ? __warn+0x7c/0x110 ? debug_print_object+0x7d/0xb0 ? report_bug+0xf1/0x1d0 ? prb_read_valid+0x17/0x20 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? debug_print_object+0x7d/0xb0 ? debug_print_object+0x7d/0xb0 ? __pfx_timerlat_irq+0x10/0x10 __debug_object_init+0x110/0x150 hrtimer_init+0x1d/0x60 timerlat_main+0xab/0x2d0 ? __pfx_timerlat_main+0x10/0x10 kthread+0xb7/0xe0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ``` After tracing the scheduling event, it was discovered that the migration of the "timerlat/1" thread was performed during thread creation. Further analysis confirmed that it is because the CPU online processing for osnoise is implemented through workers, which is asynchronous with the offline processing. When the worker was scheduled to create a thread, the CPU may has already been removed from the cpu_online_mask during the offline process, resulting in the inability to select the right CPU: T1 | T2 [CPUHP_ONLINE] | cpu_device_down() osnoise_hotplug_workfn() | | cpus_write_lock() | takedown_cpu(1) | cpus_write_unlock() [CPUHP_OFFLINE] | cpus_read_lock() | start_kthread(1) | cpus_read_unlock() | To fix this, skip online processing if the CPU is already offline. |
| CVE-2024-49865 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: move xa_alloc to prevent UAF Evil user can guess the next id of the vm before the ioctl completes and then call vm destroy ioctl to trigger UAF since create ioctl is still referencing the same vm. Move the xa_alloc all the way to the end to prevent this. v2: - Rebase (cherry picked from commit dcfd3971327f3ee92765154baebbaece833d3ca9) |
| CVE-2024-49864 | In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix a race between socket set up and I/O thread creation In rxrpc_open_socket(), it sets up the socket and then sets up the I/O thread that will handle it. This is a problem, however, as there's a gap between the two phases in which a packet may come into rxrpc_encap_rcv() from the UDP packet but we oops when trying to wake the not-yet created I/O thread. As a quick fix, just make rxrpc_encap_rcv() discard the packet if there's no I/O thread yet. A better, but more intrusive fix would perhaps be to rearrange things such that the socket creation is done by the I/O thread. |
| CVE-2024-49863 | In the Linux kernel, the following vulnerability has been resolved: vhost/scsi: null-ptr-dereference in vhost_scsi_get_req() Since commit 3f8ca2e115e5 ("vhost/scsi: Extract common handling code from control queue handler") a null pointer dereference bug can be triggered when guest sends an SCSI AN request. In vhost_scsi_ctl_handle_vq(), `vc.target` is assigned with `&v_req.tmf.lun[1]` within a switch-case block and is then passed to vhost_scsi_get_req() which extracts `vc->req` and `tpg`. However, for a `VIRTIO_SCSI_T_AN_*` request, tpg is not required, so `vc.target` is set to NULL in this branch. Later, in vhost_scsi_get_req(), `vc->target` is dereferenced without being checked, leading to a null pointer dereference bug. This bug can be triggered from guest. When this bug occurs, the vhost_worker process is killed while holding `vq->mutex` and the corresponding tpg will remain occupied indefinitely. Below is the KASAN report: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 840 Comm: poc Not tainted 6.10.0+ #1 Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:vhost_scsi_get_req+0x165/0x3a0 Code: 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 65 30 4c 89 e2 48 c1 ea 03 <0f> b6 04 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 be 01 00 00 RSP: 0018:ffff888017affb50 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88801b000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888017affcb8 RBP: ffff888017affb80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888017affc88 R14: ffff888017affd1c R15: ffff888017993000 FS: 000055556e076500(0000) GS:ffff88806b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200027c0 CR3: 0000000010ed0004 CR4: 0000000000370ef0 Call Trace: <TASK> ? show_regs+0x86/0xa0 ? die_addr+0x4b/0xd0 ? exc_general_protection+0x163/0x260 ? asm_exc_general_protection+0x27/0x30 ? vhost_scsi_get_req+0x165/0x3a0 vhost_scsi_ctl_handle_vq+0x2a4/0xca0 ? __pfx_vhost_scsi_ctl_handle_vq+0x10/0x10 ? __switch_to+0x721/0xeb0 ? __schedule+0xda5/0x5710 ? __kasan_check_write+0x14/0x30 ? _raw_spin_lock+0x82/0xf0 vhost_scsi_ctl_handle_kick+0x52/0x90 vhost_run_work_list+0x134/0x1b0 vhost_task_fn+0x121/0x350 ... </TASK> ---[ end trace 0000000000000000 ]--- Let's add a check in vhost_scsi_get_req. [whitespace fixes] |
| CVE-2024-49862 | In the Linux kernel, the following vulnerability has been resolved: powercap: intel_rapl: Fix off by one in get_rpi() The rp->priv->rpi array is either rpi_msr or rpi_tpmi which have NR_RAPL_PRIMITIVES number of elements. Thus the > needs to be >= to prevent an off by one access. |
| CVE-2024-49861 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix helper writes to read-only maps Lonial found an issue that despite user- and BPF-side frozen BPF map (like in case of .rodata), it was still possible to write into it from a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT} as arguments. In check_func_arg() when the argument is as mentioned, the meta->raw_mode is never set. Later, check_helper_mem_access(), under the case of PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the subsequent call to check_map_access_type() and given the BPF map is read-only it succeeds. The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT when results are written into them as opposed to read out of them. The latter indicates that it's okay to pass a pointer to uninitialized memory as the memory is written to anyway. However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM just with additional alignment requirement. So it is better to just get rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the fixed size memory types. For this, add MEM_ALIGNED to additionally ensure alignment given these helpers write directly into the args via *<ptr> = val. The .arg*_size has been initialized reflecting the actual sizeof(*<ptr>). MEM_ALIGNED can only be used in combination with MEM_FIXED_SIZE annotated argument types, since in !MEM_FIXED_SIZE cases the verifier does not know the buffer size a priori and therefore cannot blindly write *<ptr> = val. |
| CVE-2024-49860 | In the Linux kernel, the following vulnerability has been resolved: ACPI: sysfs: validate return type of _STR method Only buffer objects are valid return values of _STR. If something else is returned description_show() will access invalid memory. |
| CVE-2024-49859 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to check atomic_file in f2fs ioctl interfaces Some f2fs ioctl interfaces like f2fs_ioc_set_pin_file(), f2fs_move_file_range(), and f2fs_defragment_range() missed to check atomic_write status, which may cause potential race issue, fix it. |
| CVE-2024-49858 | In the Linux kernel, the following vulnerability has been resolved: efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption The TPM event log table is a Linux specific construct, where the data produced by the GetEventLog() boot service is cached in memory, and passed on to the OS using an EFI configuration table. The use of EFI_LOADER_DATA here results in the region being left unreserved in the E820 memory map constructed by the EFI stub, and this is the memory description that is passed on to the incoming kernel by kexec, which is therefore unaware that the region should be reserved. Even though the utility of the TPM2 event log after a kexec is questionable, any corruption might send the parsing code off into the weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY instead, which is always treated as reserved by the E820 conversion logic. |
| CVE-2024-49857 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: set the cipher for secured NDP ranging The cipher pointer is not set, but is derefereced trying to set its content, which leads to a NULL pointer dereference. Fix it by pointing to the cipher parameter before dereferencing. |
| CVE-2024-49856 | In the Linux kernel, the following vulnerability has been resolved: x86/sgx: Fix deadlock in SGX NUMA node search When the current node doesn't have an EPC section configured by firmware and all other EPC sections are used up, CPU can get stuck inside the while loop that looks for an available EPC page from remote nodes indefinitely, leading to a soft lockup. Note how nid_of_current will never be equal to nid in that while loop because nid_of_current is not set in sgx_numa_mask. Also worth mentioning is that it's perfectly fine for the firmware not to setup an EPC section on a node. While setting up an EPC section on each node can enhance performance, it is not a requirement for functionality. Rework the loop to start and end on *a* node that has SGX memory. This avoids the deadlock looking for the current SGX-lacking node to show up in the loop when it never will. |
| CVE-2024-49855 | In the Linux kernel, the following vulnerability has been resolved: nbd: fix race between timeout and normal completion If request timetout is handled by nbd_requeue_cmd(), normal completion has to be stopped for avoiding to complete this requeued request, other use-after-free can be triggered. Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime make sure that cmd->lock is grabbed for clearing the flag and the requeue. |
| CVE-2024-49854 | In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix uaf for accessing waker_bfqq after splitting After commit 42c306ed7233 ("block, bfq: don't break merge chain in bfq_split_bfqq()"), if the current procress is the last holder of bfqq, the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq may in the merge chain of bfqq, hence just recored waker_bfqq is still not safe. Fix the problem by adding a helper bfq_waker_bfqq() to check if bfqq->waker_bfqq is in the merge chain, and current procress is the only holder. |
| CVE-2024-49853 | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix double free in OPTEE transport Channels can be shared between protocols, avoid freeing the same channel descriptors twice when unloading the stack. |
| CVE-2024-49852 | In the Linux kernel, the following vulnerability has been resolved: scsi: elx: libefc: Fix potential use after free in efc_nport_vport_del() The kref_put() function will call nport->release if the refcount drops to zero. The nport->release release function is _efc_nport_free() which frees "nport". But then we dereference "nport" on the next line which is a use after free. Re-order these lines to avoid the use after free. |
| CVE-2024-49851 | In the Linux kernel, the following vulnerability has been resolved: tpm: Clean up TPM space after command failure tpm_dev_transmit prepares the TPM space before attempting command transmission. However if the command fails no rollback of this preparation is done. This can result in transient handles being leaked if the device is subsequently closed with no further commands performed. Fix this by flushing the space in the event of command transmission failure. |
| CVE-2024-49850 | In the Linux kernel, the following vulnerability has been resolved: bpf: correctly handle malformed BPF_CORE_TYPE_ID_LOCAL relos In case of malformed relocation record of kind BPF_CORE_TYPE_ID_LOCAL referencing a non-existing BTF type, function bpf_core_calc_relo_insn would cause a null pointer deference. Fix this by adding a proper check upper in call stack, as malformed relocation records could be passed from user space. Simplest reproducer is a program: r0 = 0 exit With a single relocation record: .insn_off = 0, /* patch first instruction */ .type_id = 100500, /* this type id does not exist */ .access_str_off = 6, /* offset of string "0" */ .kind = BPF_CORE_TYPE_ID_LOCAL, See the link for original reproducer or next commit for a test case. |
| CVE-2024-47757 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential oob read in nilfs_btree_check_delete() The function nilfs_btree_check_delete(), which checks whether degeneration to direct mapping occurs before deleting a b-tree entry, causes memory access outside the block buffer when retrieving the maximum key if the root node has no entries. This does not usually happen because b-tree mappings with 0 child nodes are never created by mkfs.nilfs2 or nilfs2 itself. However, it can happen if the b-tree root node read from a device is configured that way, so fix this potential issue by adding a check for that case. |
| CVE-2024-47756 | In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Fix if-statement expression in ks_pcie_quirk() This code accidentally uses && where || was intended. It potentially results in a NULL dereference. Thus, fix the if-statement expression to use the correct condition. [kwilczynski: commit log] |
| CVE-2024-47754 | In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix H264 multi stateless decoder smatch warning Fix a smatch static checker warning on vdec_h264_req_multi_if.c. Which leads to a kernel crash when fb is NULL. |
| CVE-2024-47753 | In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix VP8 stateless decoder smatch warning Fix a smatch static checker warning on vdec_vp8_req_if.c. Which leads to a kernel crash when fb is NULL. |
| CVE-2024-47752 | In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix H264 stateless decoder smatch warning Fix a smatch static checker warning on vdec_h264_req_if.c. Which leads to a kernel crash when fb is NULL. |
| CVE-2024-47751 | In the Linux kernel, the following vulnerability has been resolved: PCI: kirin: Fix buffer overflow in kirin_pcie_parse_port() Within kirin_pcie_parse_port(), the pcie->num_slots is compared to pcie->gpio_id_reset size (MAX_PCI_SLOTS) which is correct and would lead to an overflow. Thus, fix condition to pcie->num_slots + 1 >= MAX_PCI_SLOTS and move pcie->num_slots increment below the if-statement to avoid out-of-bounds array access. Found by Linux Verification Center (linuxtesting.org) with SVACE. [kwilczynski: commit log] |
| CVE-2024-47750 | In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix Use-After-Free of rsv_qp on HIP08 Currently rsv_qp is freed before ib_unregister_device() is called on HIP08. During the time interval, users can still dereg MR and rsv_qp will be used in this process, leading to a UAF. Move the release of rsv_qp after calling ib_unregister_device() to fix it. |
| CVE-2024-47749 | In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Added NULL check for lookup_atid The lookup_atid() function can return NULL if the ATID is invalid or does not exist in the identifier table, which could lead to dereferencing a null pointer without a check in the `act_establish()` and `act_open_rpl()` functions. Add a NULL check to prevent null pointer dereferencing. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-47748 | In the Linux kernel, the following vulnerability has been resolved: vhost_vdpa: assign irq bypass producer token correctly We used to call irq_bypass_unregister_producer() in vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the token pointer is still valid or not. Actually, we use the eventfd_ctx as the token so the life cycle of the token should be bound to the VHOST_SET_VRING_CALL instead of vhost_vdpa_setup_vq_irq() which could be called by set_status(). Fixing this by setting up irq bypass producer's token when handling VHOST_SET_VRING_CALL and un-registering the producer before calling vhost_vring_ioctl() to prevent a possible use after free as eventfd could have been released in vhost_vring_ioctl(). And such registering and unregistering will only be done if DRIVER_OK is set. |
| CVE-2024-47747 | In the Linux kernel, the following vulnerability has been resolved: net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition In the ether3_probe function, a timer is initialized with a callback function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is started, there is a risk of a race condition if the module or device is removed, triggering the ether3_remove function to perform cleanup. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ether3_ledoff ether3_remove | free_netdev(dev); | put_devic | kfree(dev); | | ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); | // use dev Fix it by ensuring that the timer is canceled before proceeding with the cleanup in ether3_remove. |
| CVE-2024-47746 | In the Linux kernel, the following vulnerability has been resolved: fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set This may be a typo. The comment has said shared locks are not allowed when this bit is set. If using shared lock, the wait in `fuse_file_cached_io_open` may be forever. |
| CVE-2024-47745 | In the Linux kernel, the following vulnerability has been resolved: mm: call the security_mmap_file() LSM hook in remap_file_pages() The remap_file_pages syscall handler calls do_mmap() directly, which doesn't contain the LSM security check. And if the process has called personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for RW pages, this will actually result in remapping the pages to RWX, bypassing a W^X policy enforced by SELinux. So we should check prot by security_mmap_file LSM hook in the remap_file_pages syscall handler before do_mmap() is called. Otherwise, it potentially permits an attacker to bypass a W^X policy enforced by SELinux. The bypass is similar to CVE-2016-10044, which bypass the same thing via AIO and can be found in [1]. The PoC: $ cat > test.c int main(void) { size_t pagesz = sysconf(_SC_PAGE_SIZE); int mfd = syscall(SYS_memfd_create, "test", 0); const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE, MAP_SHARED, mfd, 0); unsigned int old = syscall(SYS_personality, 0xffffffff); syscall(SYS_personality, READ_IMPLIES_EXEC | old); syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0); syscall(SYS_personality, old); // show the RWX page exists even if W^X policy is enforced int fd = open("/proc/self/maps", O_RDONLY); unsigned char buf2[1024]; while (1) { int ret = read(fd, buf2, 1024); if (ret <= 0) break; write(1, buf2, ret); } close(fd); } $ gcc test.c -o test $ ./test | grep rwx 7f1836c34000-7f1836c35000 rwxs 00002000 00:01 2050 /memfd:test (deleted) [PM: subject line tweaks] |
| CVE-2024-47744 | In the Linux kernel, the following vulnerability has been resolved: KVM: Use dedicated mutex to protect kvm_usage_count to avoid deadlock Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 ---truncated--- |
| CVE-2024-47743 | In the Linux kernel, the following vulnerability has been resolved: KEYS: prevent NULL pointer dereference in find_asymmetric_key() In find_asymmetric_key(), if all NULLs are passed in the id_{0,1,2} arguments, the kernel will first emit WARN but then have an oops because id_2 gets dereferenced anyway. Add the missing id_2 check and move WARN_ON() to the final else branch to avoid duplicate NULL checks. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. |
| CVE-2024-47742 | In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Block path traversal Most firmware names are hardcoded strings, or are constructed from fairly constrained format strings where the dynamic parts are just some hex numbers or such. However, there are a couple codepaths in the kernel where firmware file names contain string components that are passed through from a device or semi-privileged userspace; the ones I could find (not counting interfaces that require root privileges) are: - lpfc_sli4_request_firmware_update() seems to construct the firmware filename from "ModelName", a string that was previously parsed out of some descriptor ("Vital Product Data") in lpfc_fill_vpd() - nfp_net_fw_find() seems to construct a firmware filename from a model name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I think parses some descriptor that was read from the device. (But this case likely isn't exploitable because the format string looks like "netronome/nic_%s", and there shouldn't be any *folders* starting with "netronome/nic_". The previous case was different because there, the "%s" is *at the start* of the format string.) - module_flash_fw_schedule() is reachable from the ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is enough to pass the privilege check), and takes a userspace-provided firmware name. (But I think to reach this case, you need to have CAP_NET_ADMIN over a network namespace that a special kind of ethernet device is mapped into, so I think this is not a viable attack path in practice.) Fix it by rejecting any firmware names containing ".." path components. For what it's worth, I went looking and haven't found any USB device drivers that use the firmware loader dangerously. |
| CVE-2024-47741 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race setting file private on concurrent lseek using same fd When doing concurrent lseek(2) system calls against the same file descriptor, using multiple threads belonging to the same process, we have a short time window where a race happens and can result in a memory leak. The race happens like this: 1) A program opens a file descriptor for a file and then spawns two threads (with the pthreads library for example), lets call them task A and task B; 2) Task A calls lseek with SEEK_DATA or SEEK_HOLE and ends up at file.c:find_desired_extent() while holding a read lock on the inode; 3) At the start of find_desired_extent(), it extracts the file's private_data pointer into a local variable named 'private', which has a value of NULL; 4) Task B also calls lseek with SEEK_DATA or SEEK_HOLE, locks the inode in shared mode and enters file.c:find_desired_extent(), where it also extracts file->private_data into its local variable 'private', which has a NULL value; 5) Because it saw a NULL file private, task A allocates a private structure and assigns to the file structure; 6) Task B also saw a NULL file private so it also allocates its own file private and then assigns it to the same file structure, since both tasks are using the same file descriptor. At this point we leak the private structure allocated by task A. Besides the memory leak, there's also the detail that both tasks end up using the same cached state record in the private structure (struct btrfs_file_private::llseek_cached_state), which can result in a use-after-free problem since one task can free it while the other is still using it (only one task took a reference count on it). Also, sharing the cached state is not a good idea since it could result in incorrect results in the future - right now it should not be a problem because it end ups being used only in extent-io-tree.c:count_range_bits() where we do range validation before using the cached state. Fix this by protecting the private assignment and check of a file while holding the inode's spinlock and keep track of the task that allocated the private, so that it's used only by that task in order to prevent user-after-free issues with the cached state record as well as potentially using it incorrectly in the future. |
| CVE-2024-47740 | In the Linux kernel, the following vulnerability has been resolved: f2fs: Require FMODE_WRITE for atomic write ioctls The F2FS ioctls for starting and committing atomic writes check for inode_owner_or_capable(), but this does not give LSMs like SELinux or Landlock an opportunity to deny the write access - if the caller's FSUID matches the inode's UID, inode_owner_or_capable() immediately returns true. There are scenarios where LSMs want to deny a process the ability to write particular files, even files that the FSUID of the process owns; but this can currently partially be bypassed using atomic write ioctls in two ways: - F2FS_IOC_START_ATOMIC_REPLACE + F2FS_IOC_COMMIT_ATOMIC_WRITE can truncate an inode to size 0 - F2FS_IOC_START_ATOMIC_WRITE + F2FS_IOC_ABORT_ATOMIC_WRITE can revert changes another process concurrently made to a file Fix it by requiring FMODE_WRITE for these operations, just like for F2FS_IOC_MOVE_RANGE. Since any legitimate caller should only be using these ioctls when intending to write into the file, that seems unlikely to break anything. |
| CVE-2024-47739 | In the Linux kernel, the following vulnerability has been resolved: padata: use integer wrap around to prevent deadlock on seq_nr overflow When submitting more than 2^32 padata objects to padata_do_serial, the current sorting implementation incorrectly sorts padata objects with overflowed seq_nr, causing them to be placed before existing objects in the reorder list. This leads to a deadlock in the serialization process as padata_find_next cannot match padata->seq_nr and pd->processed because the padata instance with overflowed seq_nr will be selected next. To fix this, we use an unsigned integer wrap around to correctly sort padata objects in scenarios with integer overflow. |
| CVE-2024-47738 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't use rate mask for offchannel TX either Like the commit ab9177d83c04 ("wifi: mac80211: don't use rate mask for scanning"), ignore incorrect settings to avoid no supported rate warning reported by syzbot. The syzbot did bisect and found cause is commit 9df66d5b9f45 ("cfg80211: fix default HE tx bitrate mask in 2G band"), which however corrects bitmask of HE MCS and recognizes correctly settings of empty legacy rate plus HE MCS rate instead of returning -EINVAL. As suggestions [1], follow the change of SCAN TX to consider this case of offchannel TX as well. [1] https://lore.kernel.org/linux-wireless/[email protected]/T/#m2ac2a6d2be06a37c9c47a3d8a44b4f647ed4f024 |
| CVE-2024-47737 | In the Linux kernel, the following vulnerability has been resolved: nfsd: call cache_put if xdr_reserve_space returns NULL If not enough buffer space available, but idmap_lookup has triggered lookup_fn which calls cache_get and returns successfully. Then we missed to call cache_put here which pairs with cache_get. Reviwed-by: Jeff Layton <[email protected]> |
| CVE-2024-47736 | In the Linux kernel, the following vulnerability has been resolved: erofs: handle overlapped pclusters out of crafted images properly syzbot reported a task hang issue due to a deadlock case where it is waiting for the folio lock of a cached folio that will be used for cache I/Os. After looking into the crafted fuzzed image, I found it's formed with several overlapped big pclusters as below: Ext: logical offset | length : physical offset | length 0: 0.. 16384 | 16384 : 151552.. 167936 | 16384 1: 16384.. 32768 | 16384 : 155648.. 172032 | 16384 2: 32768.. 49152 | 16384 : 537223168.. 537239552 | 16384 ... Here, extent 0/1 are physically overlapped although it's entirely _impossible_ for normal filesystem images generated by mkfs. First, managed folios containing compressed data will be marked as up-to-date and then unlocked immediately (unlike in-place folios) when compressed I/Os are complete. If physical blocks are not submitted in the incremental order, there should be separate BIOs to avoid dependency issues. However, the current code mis-arranges z_erofs_fill_bio_vec() and BIO submission which causes unexpected BIO waits. Second, managed folios will be connected to their own pclusters for efficient inter-queries. However, this is somewhat hard to implement easily if overlapped big pclusters exist. Again, these only appear in fuzzed images so let's simply fall back to temporary short-lived pages for correctness. Additionally, it justifies that referenced managed folios cannot be truncated for now and reverts part of commit 2080ca1ed3e4 ("erofs: tidy up `struct z_erofs_bvec`") for simplicity although it shouldn't be any difference. |
| CVE-2024-47735 | In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix spin_unlock_irqrestore() called with IRQs enabled Fix missuse of spin_lock_irq()/spin_unlock_irq() when spin_lock_irqsave()/spin_lock_irqrestore() was hold. This was discovered through the lock debugging, and the corresponding log is as follows: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 96 PID: 2074 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40 ... Call trace: warn_bogus_irq_restore+0x30/0x40 _raw_spin_unlock_irqrestore+0x84/0xc8 add_qp_to_list+0x11c/0x148 [hns_roce_hw_v2] hns_roce_create_qp_common.constprop.0+0x240/0x780 [hns_roce_hw_v2] hns_roce_create_qp+0x98/0x160 [hns_roce_hw_v2] create_qp+0x138/0x258 ib_create_qp_kernel+0x50/0xe8 create_mad_qp+0xa8/0x128 ib_mad_port_open+0x218/0x448 ib_mad_init_device+0x70/0x1f8 add_client_context+0xfc/0x220 enable_device_and_get+0xd0/0x140 ib_register_device.part.0+0xf4/0x1c8 ib_register_device+0x34/0x50 hns_roce_register_device+0x174/0x3d0 [hns_roce_hw_v2] hns_roce_init+0xfc/0x2c0 [hns_roce_hw_v2] __hns_roce_hw_v2_init_instance+0x7c/0x1d0 [hns_roce_hw_v2] hns_roce_hw_v2_init_instance+0x9c/0x180 [hns_roce_hw_v2] |
| CVE-2024-47734 | In the Linux kernel, the following vulnerability has been resolved: bonding: Fix unnecessary warnings and logs from bond_xdp_get_xmit_slave() syzbot reported a WARNING in bond_xdp_get_xmit_slave. To reproduce this[1], one bond device (bond1) has xdpdrv, which increases bpf_master_redirect_enabled_key. Another bond device (bond0) which is unsupported by XDP but its slave (veth3) has xdpgeneric that returns XDP_TX. This triggers WARN_ON_ONCE() from the xdp_master_redirect(). To reduce unnecessary warnings and improve log management, we need to delete the WARN_ON_ONCE() and add ratelimit to the netdev_err(). [1] Steps to reproduce: # Needs tx_xdp with return XDP_TX; ip l add veth0 type veth peer veth1 ip l add veth3 type veth peer veth4 ip l add bond0 type bond mode 6 # BOND_MODE_ALB, unsupported by XDP ip l add bond1 type bond # BOND_MODE_ROUNDROBIN by default ip l set veth0 master bond1 ip l set bond1 up # Increases bpf_master_redirect_enabled_key ip l set dev bond1 xdpdrv object tx_xdp.o section xdp_tx ip l set veth3 master bond0 ip l set bond0 up ip l set veth4 up # Triggers WARN_ON_ONCE() from the xdp_master_redirect() ip l set veth3 xdpgeneric object tx_xdp.o section xdp_tx |
| CVE-2024-47733 | In the Linux kernel, the following vulnerability has been resolved: netfs: Delete subtree of 'fs/netfs' when netfs module exits In netfs_init() or fscache_proc_init(), we create dentry under 'fs/netfs', but in netfs_exit(), we only delete the proc entry of 'fs/netfs' without deleting its subtree. This triggers the following WARNING: ================================================================== remove_proc_entry: removing non-empty directory 'fs/netfs', leaking at least 'requests' WARNING: CPU: 4 PID: 566 at fs/proc/generic.c:717 remove_proc_entry+0x160/0x1c0 Modules linked in: netfs(-) CPU: 4 UID: 0 PID: 566 Comm: rmmod Not tainted 6.11.0-rc3 #860 RIP: 0010:remove_proc_entry+0x160/0x1c0 Call Trace: <TASK> netfs_exit+0x12/0x620 [netfs] __do_sys_delete_module.isra.0+0x14c/0x2e0 do_syscall_64+0x4b/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== Therefore use remove_proc_subtree() instead of remove_proc_entry() to fix the above problem. |
| CVE-2024-47732 | In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix potential use after free bug The free_device_compression_mode(iaa_device, device_mode) function frees "device_mode" but it iss passed to iaa_compression_modes[i]->free() a few lines later resulting in a use after free. The good news is that, so far as I can tell, nothing implements the ->free() function and the use after free happens in dead code. But, with this fix, when something does implement it, we'll be ready. :) |
| CVE-2024-47731 | In the Linux kernel, the following vulnerability has been resolved: drivers/perf: Fix ali_drw_pmu driver interrupt status clearing The alibaba_uncore_pmu driver forgot to clear all interrupt status in the interrupt processing function. After the PMU counter overflow interrupt occurred, an interrupt storm occurred, causing the system to hang. Therefore, clear the correct interrupt status in the interrupt handling function to fix it. |
| CVE-2024-47730 | In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/qm - inject error before stopping queue The master ooo cannot be completely closed when the accelerator core reports memory error. Therefore, the driver needs to inject the qm error to close the master ooo. Currently, the qm error is injected after stopping queue, memory may be released immediately after stopping queue, causing the device to access the released memory. Therefore, error is injected to close master ooo before stopping queue to ensure that the device does not access the released memory. |
| CVE-2024-47729 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Use reserved copy engine for user binds on faulting devices User binds map to engines with can fault, faults depend on user binds completion, thus we can deadlock. Avoid this by using reserved copy engine for user binds on faulting devices. While we are here, normalize bind queue creation with a helper. v2: - Pass in extensions to bind queue creation (CI) v3: - s/resevered/reserved (Lucas) - Fix NULL hwe check (Jonathan) |
| CVE-2024-47728 | In the Linux kernel, the following vulnerability has been resolved: bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error For all non-tracing helpers which formerly had ARG_PTR_TO_{LONG,INT} as input arguments, zero the value for the case of an error as otherwise it could leak memory. For tracing, it is not needed given CAP_PERFMON can already read all kernel memory anyway hence bpf_get_func_arg() and bpf_get_func_ret() is skipped in here. Also, the MTU helpers mtu_len pointer value is being written but also read. Technically, the MEM_UNINIT should not be there in order to always force init. Removing MEM_UNINIT needs more verifier rework though: MEM_UNINIT right now implies two things actually: i) write into memory, ii) memory does not have to be initialized. If we lift MEM_UNINIT, it then becomes: i) read into memory, ii) memory must be initialized. This means that for bpf_*_check_mtu() we're readding the issue we're trying to fix, that is, it would then be able to write back into things like .rodata BPF maps. Follow-up work will rework the MEM_UNINIT semantics such that the intent can be better expressed. For now just clear the *mtu_len on error path which can be lifted later again. |
| CVE-2024-47727 | In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Fix "in-kernel MMIO" check TDX only supports kernel-initiated MMIO operations. The handle_mmio() function checks if the #VE exception occurred in the kernel and rejects the operation if it did not. However, userspace can deceive the kernel into performing MMIO on its behalf. For example, if userspace can point a syscall to an MMIO address, syscall does get_user() or put_user() on it, triggering MMIO #VE. The kernel will treat the #VE as in-kernel MMIO. Ensure that the target MMIO address is within the kernel before decoding instruction. |
| CVE-2024-47726 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to wait dio completion It should wait all existing dio write IOs before block removal, otherwise, previous direct write IO may overwrite data in the block which may be reused by other inode. |
| CVE-2024-47724 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: use work queue to process beacon tx event Commit 3a415daa3e8b ("wifi: ath11k: add P2P IE in beacon template") from Feb 28, 2024 (linux-next), leads to the following Smatch static checker warning: drivers/net/wireless/ath/ath11k/wmi.c:1742 ath11k_wmi_p2p_go_bcn_ie() warn: sleeping in atomic context The reason is that ath11k_bcn_tx_status_event() will directly call might sleep function ath11k_wmi_cmd_send() during RCU read-side critical sections. The call trace is like: ath11k_bcn_tx_status_event() -> rcu_read_lock() -> ath11k_mac_bcn_tx_event() -> ath11k_mac_setup_bcn_tmpl() …… -> ath11k_wmi_bcn_tmpl() -> ath11k_wmi_cmd_send() -> rcu_read_unlock() Commit 886433a98425 ("ath11k: add support for BSS color change") added the ath11k_mac_bcn_tx_event(), commit 01e782c89108 ("ath11k: fix warning of RCU usage for ath11k_mac_get_arvif_by_vdev_id()") added the RCU lock to avoid warning but also introduced this BUG. Use work queue to avoid directly calling ath11k_mac_bcn_tx_event() during RCU critical sections. No need to worry about the deletion of vif because cancel_work_sync() will drop the work if it doesn't start or block vif deletion until the running work is done. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 |
| CVE-2024-47723 | In the Linux kernel, the following vulnerability has been resolved: jfs: fix out-of-bounds in dbNextAG() and diAlloc() In dbNextAG() , there is no check for the case where bmp->db_numag is greater or same than MAXAG due to a polluted image, which causes an out-of-bounds. Therefore, a bounds check should be added in dbMount(). And in dbNextAG(), a check for the case where agpref is greater than bmp->db_numag should be added, so an out-of-bounds exception should be prevented. Additionally, a check for the case where agno is greater or same than MAXAG should be added in diAlloc() to prevent out-of-bounds. |
| CVE-2024-47721 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: remove unused C2H event ID RTW89_MAC_C2H_FUNC_READ_WOW_CAM to prevent out-of-bounds reading The handler of firmware C2H event RTW89_MAC_C2H_FUNC_READ_WOW_CAM isn't implemented, but driver expects number of handlers is NUM_OF_RTW89_MAC_C2H_FUNC_WOW causing out-of-bounds access. Fix it by removing ID. Addresses-Coverity-ID: 1598775 ("Out-of-bounds read") |
| CVE-2024-47720 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for set_output_gamma in dcn30_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn30_set_output_transfer_func function. Previously, set_output_gamma was being checked for nullity at line 386, but then it was being dereferenced without any nullity check at line 401. This could potentially lead to a null pointer dereference error if set_output_gamma is indeed null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a nullity check for set_output_gamma before the call to set_output_gamma at line 401. If set_output_gamma is null, we log an error message and do not call the function. This fix prevents a potential null pointer dereference error. drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:401 dcn30_set_output_transfer_func() error: we previously assumed 'mpc->funcs->set_output_gamma' could be null (see line 386) drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c 373 bool dcn30_set_output_transfer_func(struct dc *dc, 374 struct pipe_ctx *pipe_ctx, 375 const struct dc_stream_state *stream) 376 { 377 int mpcc_id = pipe_ctx->plane_res.hubp->inst; 378 struct mpc *mpc = pipe_ctx->stream_res.opp->ctx->dc->res_pool->mpc; 379 const struct pwl_params *params = NULL; 380 bool ret = false; 381 382 /* program OGAM or 3DLUT only for the top pipe*/ 383 if (pipe_ctx->top_pipe == NULL) { 384 /*program rmu shaper and 3dlut in MPC*/ 385 ret = dcn30_set_mpc_shaper_3dlut(pipe_ctx, stream); 386 if (ret == false && mpc->funcs->set_output_gamma) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If this is NULL 387 if (stream->out_transfer_func.type == TF_TYPE_HWPWL) 388 params = &stream->out_transfer_func.pwl; 389 else if (pipe_ctx->stream->out_transfer_func.type == 390 TF_TYPE_DISTRIBUTED_POINTS && 391 cm3_helper_translate_curve_to_hw_format( 392 &stream->out_transfer_func, 393 &mpc->blender_params, false)) 394 params = &mpc->blender_params; 395 /* there are no ROM LUTs in OUTGAM */ 396 if (stream->out_transfer_func.type == TF_TYPE_PREDEFINED) 397 BREAK_TO_DEBUGGER(); 398 } 399 } 400 --> 401 mpc->funcs->set_output_gamma(mpc, mpcc_id, params); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Then it will crash 402 return ret; 403 } |
| CVE-2024-47719 | In the Linux kernel, the following vulnerability has been resolved: iommufd: Protect against overflow of ALIGN() during iova allocation Userspace can supply an iova and uptr such that the target iova alignment becomes really big and ALIGN() overflows which corrupts the selected area range during allocation. CONFIG_IOMMUFD_TEST can detect this: WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline] WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352 Modules linked in: CPU: 1 PID: 5092 Comm: syz-executor294 Not tainted 6.10.0-rc5-syzkaller-00294-g3ffea9a7a6f7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 RIP: 0010:iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline] RIP: 0010:iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352 Code: fc e9 a4 f3 ff ff e8 1a 8b 4c fc 41 be e4 ff ff ff e9 8a f3 ff ff e8 0a 8b 4c fc 90 0f 0b 90 e9 37 f5 ff ff e8 fc 8a 4c fc 90 <0f> 0b 90 e9 68 f3 ff ff 48 c7 c1 ec 82 ad 8f 80 e1 07 80 c1 03 38 RSP: 0018:ffffc90003ebf9e0 EFLAGS: 00010293 RAX: ffffffff85499fa4 RBX: 00000000ffffffef RCX: ffff888079b49e00 RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000 RBP: ffffc90003ebfc50 R08: ffffffff85499b30 R09: ffffffff85499942 R10: 0000000000000002 R11: ffff888079b49e00 R12: ffff8880228e0010 R13: 0000000000000000 R14: 1ffff920007d7f68 R15: ffffc90003ebfd00 FS: 000055557d760380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000005fdeb8 CR3: 000000007404a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> iommufd_ioas_copy+0x610/0x7b0 drivers/iommu/iommufd/ioas.c:274 iommufd_fops_ioctl+0x4d9/0x5a0 drivers/iommu/iommufd/main.c:421 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Cap the automatic alignment to the huge page size, which is probably a better idea overall. Huge automatic alignments can fragment and chew up the available IOVA space without any reason. |
| CVE-2024-47718 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: always wait for both firmware loading attempts In 'rtw_wait_firmware_completion()', always wait for both (regular and wowlan) firmware loading attempts. Otherwise if 'rtw_usb_intf_init()' has failed in 'rtw_usb_probe()', 'rtw_usb_disconnect()' may issue 'ieee80211_free_hw()' when one of 'rtw_load_firmware_cb()' (usually the wowlan one) is still in progress, causing UAF detected by KASAN. |
| CVE-2024-47717 | In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Don't zero-out PMU snapshot area before freeing data With the latest Linux-6.11-rc3, the below NULL pointer crash is observed when SBI PMU snapshot is enabled for the guest and the guest is forcefully powered-off. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000508 Oops [#1] Modules linked in: kvm CPU: 0 UID: 0 PID: 61 Comm: term-poll Not tainted 6.11.0-rc3-00018-g44d7178dd77a #3 Hardware name: riscv-virtio,qemu (DT) epc : __kvm_write_guest_page+0x94/0xa6 [kvm] ra : __kvm_write_guest_page+0x54/0xa6 [kvm] epc : ffffffff01590e98 ra : ffffffff01590e58 sp : ffff8f80001f39b0 gp : ffffffff81512a60 tp : ffffaf80024872c0 t0 : ffffaf800247e000 t1 : 00000000000007e0 t2 : 0000000000000000 s0 : ffff8f80001f39f0 s1 : 00007fff89ac4000 a0 : ffffffff015dd7e8 a1 : 0000000000000086 a2 : 0000000000000000 a3 : ffffaf8000000000 a4 : ffffaf80024882c0 a5 : 0000000000000000 a6 : ffffaf800328d780 a7 : 00000000000001cc s2 : ffffaf800197bd00 s3 : 00000000000828c4 s4 : ffffaf800248c000 s5 : ffffaf800247d000 s6 : 0000000000001000 s7 : 0000000000001000 s8 : 0000000000000000 s9 : 00007fff861fd500 s10: 0000000000000001 s11: 0000000000800000 t3 : 00000000000004d3 t4 : 00000000000004d3 t5 : ffffffff814126e0 t6 : ffffffff81412700 status: 0000000200000120 badaddr: 0000000000000508 cause: 000000000000000d [<ffffffff01590e98>] __kvm_write_guest_page+0x94/0xa6 [kvm] [<ffffffff015943a6>] kvm_vcpu_write_guest+0x56/0x90 [kvm] [<ffffffff015a175c>] kvm_pmu_clear_snapshot_area+0x42/0x7e [kvm] [<ffffffff015a1972>] kvm_riscv_vcpu_pmu_deinit.part.0+0xe0/0x14e [kvm] [<ffffffff015a2ad0>] kvm_riscv_vcpu_pmu_deinit+0x1a/0x24 [kvm] [<ffffffff0159b344>] kvm_arch_vcpu_destroy+0x28/0x4c [kvm] [<ffffffff0158e420>] kvm_destroy_vcpus+0x5a/0xda [kvm] [<ffffffff0159930c>] kvm_arch_destroy_vm+0x14/0x28 [kvm] [<ffffffff01593260>] kvm_destroy_vm+0x168/0x2a0 [kvm] [<ffffffff015933d4>] kvm_put_kvm+0x3c/0x58 [kvm] [<ffffffff01593412>] kvm_vm_release+0x22/0x2e [kvm] Clearly, the kvm_vcpu_write_guest() function is crashing because it is being called from kvm_pmu_clear_snapshot_area() upon guest tear down. To address the above issue, simplify the kvm_pmu_clear_snapshot_area() to not zero-out PMU snapshot area from kvm_pmu_clear_snapshot_area() because the guest is anyway being tore down. The kvm_pmu_clear_snapshot_area() is also called when guest changes PMU snapshot area of a VCPU but even in this case the previous PMU snaphsot area must not be zeroed-out because the guest might have reclaimed the pervious PMU snapshot area for some other purpose. |
| CVE-2024-47716 | In the Linux kernel, the following vulnerability has been resolved: ARM: 9410/1: vfp: Use asm volatile in fmrx/fmxr macros Floating point instructions in userspace can crash some arm kernels built with clang/LLD 17.0.6: BUG: unsupported FP instruction in kernel mode FPEXC == 0xc0000780 Internal error: Oops - undefined instruction: 0 [#1] ARM CPU: 0 PID: 196 Comm: vfp-reproducer Not tainted 6.10.0 #1 Hardware name: BCM2835 PC is at vfp_support_entry+0xc8/0x2cc LR is at do_undefinstr+0xa8/0x250 pc : [<c0101d50>] lr : [<c010a80c>] psr: a0000013 sp : dc8d1f68 ip : 60000013 fp : bedea19c r10: ec532b17 r9 : 00000010 r8 : 0044766c r7 : c0000780 r6 : ec532b17 r5 : c1c13800 r4 : dc8d1fb0 r3 : c10072c4 r2 : c0101c88 r1 : ec532b17 r0 : 0044766c Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 00c5387d Table: 0251c008 DAC: 00000051 Register r0 information: non-paged memory Register r1 information: vmalloc memory Register r2 information: non-slab/vmalloc memory Register r3 information: non-slab/vmalloc memory Register r4 information: 2-page vmalloc region Register r5 information: slab kmalloc-cg-2k Register r6 information: vmalloc memory Register r7 information: non-slab/vmalloc memory Register r8 information: non-paged memory Register r9 information: zero-size pointer Register r10 information: vmalloc memory Register r11 information: non-paged memory Register r12 information: non-paged memory Process vfp-reproducer (pid: 196, stack limit = 0x61aaaf8b) Stack: (0xdc8d1f68 to 0xdc8d2000) 1f60: 0000081f b6f69300 0000000f c10073f4 c10072c4 dc8d1fb0 1f80: ec532b17 0c532b17 0044766c b6f9ccd8 00000000 c010a80c 00447670 60000010 1fa0: ffffffff c1c13800 00c5387d c0100f10 b6f68af8 00448fc0 00000000 bedea188 1fc0: bedea314 00000001 00448ebc b6f9d000 00447608 b6f9ccd8 00000000 bedea19c 1fe0: bede9198 bedea188 b6e1061c 0044766c 60000010 ffffffff 00000000 00000000 Call trace: [<c0101d50>] (vfp_support_entry) from [<c010a80c>] (do_undefinstr+0xa8/0x250) [<c010a80c>] (do_undefinstr) from [<c0100f10>] (__und_usr+0x70/0x80) Exception stack(0xdc8d1fb0 to 0xdc8d1ff8) 1fa0: b6f68af8 00448fc0 00000000 bedea188 1fc0: bedea314 00000001 00448ebc b6f9d000 00447608 b6f9ccd8 00000000 bedea19c 1fe0: bede9198 bedea188 b6e1061c 0044766c 60000010 ffffffff Code: 0a000061 e3877202 e594003c e3a09010 (eef16a10) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception in interrupt ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- This is a minimal userspace reproducer on a Raspberry Pi Zero W: #include <stdio.h> #include <math.h> int main(void) { double v = 1.0; printf("%fn", NAN + *(volatile double *)&v); return 0; } Another way to consistently trigger the oops is: calvin@raspberry-pi-zero-w ~$ python -c "import json" The bug reproduces only when the kernel is built with DYNAMIC_DEBUG=n, because the pr_debug() calls act as barriers even when not activated. This is the output from the same kernel source built with the same compiler and DYNAMIC_DEBUG=y, where the userspace reproducer works as expected: VFP: bounce: trigger ec532b17 fpexc c0000780 VFP: emulate: INST=0xee377b06 SCR=0x00000000 VFP: bounce: trigger eef1fa10 fpexc c0000780 VFP: emulate: INST=0xeeb40b40 SCR=0x00000000 VFP: raising exceptions 30000000 calvin@raspberry-pi-zero-w ~$ ./vfp-reproducer nan Crudely grepping for vmsr/vmrs instructions in the otherwise nearly idential text for vfp_support_entry() makes the problem obvious: vmlinux.llvm.good [0xc0101cb8] <+48>: vmrs r7, fpexc vmlinux.llvm.good [0xc0101cd8] <+80>: vmsr fpexc, r0 vmlinux.llvm.good [0xc0101d20 ---truncated--- |
| CVE-2024-47715 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix oops on non-dbdc mt7986 mt7915_band_config() sets band_idx = 1 on the main phy for mt7986 with MT7975_ONE_ADIE or MT7976_ONE_ADIE. Commit 0335c034e726 ("wifi: mt76: fix race condition related to checking tx queue fill status") introduced a dereference of the phys array indirectly indexed by band_idx via wcid->phy_idx in mt76_wcid_cleanup(). This caused the following Oops on affected mt7986 devices: Unable to handle kernel read from unreadable memory at virtual address 0000000000000024 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000042545000 [0000000000000024] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] SMP Modules linked in: ... mt7915e mt76_connac_lib mt76 mac80211 cfg80211 ... CPU: 2 PID: 1631 Comm: hostapd Not tainted 5.15.150 #0 Hardware name: ZyXEL EX5700 (Telenor) (DT) pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mt76_wcid_cleanup+0x84/0x22c [mt76] lr : mt76_wcid_cleanup+0x64/0x22c [mt76] sp : ffffffc00a803700 x29: ffffffc00a803700 x28: ffffff80008f7300 x27: ffffff80003f3c00 x26: ffffff80000a7880 x25: ffffffc008c26e00 x24: 0000000000000001 x23: ffffffc000a68114 x22: 0000000000000000 x21: ffffff8004172cc8 x20: ffffffc00a803748 x19: ffffff8004152020 x18: 0000000000000000 x17: 00000000000017c0 x16: ffffffc008ef5000 x15: 0000000000000be0 x14: ffffff8004172e28 x13: ffffff8004172e28 x12: 0000000000000000 x11: 0000000000000000 x10: ffffff8004172e30 x9 : ffffff8004172e28 x8 : 0000000000000000 x7 : ffffff8004156020 x6 : 0000000000000000 x5 : 0000000000000031 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : ffffff80008f7300 x0 : 0000000000000024 Call trace: mt76_wcid_cleanup+0x84/0x22c [mt76] __mt76_sta_remove+0x70/0xbc [mt76] mt76_sta_state+0x8c/0x1a4 [mt76] mt7915_eeprom_get_power_delta+0x11e4/0x23a0 [mt7915e] drv_sta_state+0x144/0x274 [mac80211] sta_info_move_state+0x1cc/0x2a4 [mac80211] sta_set_sinfo+0xaf8/0xc24 [mac80211] sta_info_destroy_addr_bss+0x4c/0x6c [mac80211] ieee80211_color_change_finish+0x1c08/0x1e70 [mac80211] cfg80211_check_station_change+0x1360/0x4710 [cfg80211] genl_family_rcv_msg_doit+0xb4/0x110 genl_rcv_msg+0xd0/0x1bc netlink_rcv_skb+0x58/0x120 genl_rcv+0x34/0x50 netlink_unicast+0x1f0/0x2ec netlink_sendmsg+0x198/0x3d0 ____sys_sendmsg+0x1b0/0x210 ___sys_sendmsg+0x80/0xf0 __sys_sendmsg+0x44/0xa0 __arm64_sys_sendmsg+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x40/0xd0 el0_svc+0x14/0x4c el0t_64_sync_handler+0x100/0x110 el0t_64_sync+0x15c/0x160 Code: d2800002 910092c0 52800023 f9800011 (885f7c01) ---[ end trace 7e42dd9a39ed2281 ]--- Fix by using mt76_dev_phy() which will map band_idx to the correct phy for all hardware combinations. |
| CVE-2024-47714 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: use hweight16 to get correct tx antenna The chainmask is u16 so using hweight8 cannot get correct tx_ant. Without this patch, the tx_ant of band 2 would be -1 and lead to the following issue: BUG: KASAN: stack-out-of-bounds in mt7996_mcu_add_sta+0x12e0/0x16e0 [mt7996e] |
| CVE-2024-47713 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop() Since '__dev_queue_xmit()' should be called with interrupts enabled, the following backtrace: ieee80211_do_stop() ... spin_lock_irqsave(&local->queue_stop_reason_lock, flags) ... ieee80211_free_txskb() ieee80211_report_used_skb() ieee80211_report_ack_skb() cfg80211_mgmt_tx_status_ext() nl80211_frame_tx_status() genlmsg_multicast_netns() genlmsg_multicast_netns_filtered() nlmsg_multicast_filtered() netlink_broadcast_filtered() do_one_broadcast() netlink_broadcast_deliver() __netlink_sendskb() netlink_deliver_tap() __netlink_deliver_tap_skb() dev_queue_xmit() __dev_queue_xmit() ; with IRQS disabled ... spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags) issues the warning (as reported by syzbot reproducer): WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120 Fix this by implementing a two-phase skb reclamation in 'ieee80211_do_stop()', where actual work is performed outside of a section with interrupts disabled. |
| CVE-2024-47712 | In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param In the `wilc_parse_join_bss_param` function, the TSF field of the `ies` structure is accessed after the RCU read-side critical section is unlocked. According to RCU usage rules, this is illegal. Reusing this pointer can lead to unpredictable behavior, including accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the TSF value is now stored in a local variable `ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is then assigned using this local variable, ensuring that the TSF value is safely accessed. |
| CVE-2024-47711 | In the Linux kernel, the following vulnerability has been resolved: af_unix: Don't return OOB skb in manage_oob(). syzbot reported use-after-free in unix_stream_recv_urg(). [0] The scenario is 1. send(MSG_OOB) 2. recv(MSG_OOB) -> The consumed OOB remains in recv queue 3. send(MSG_OOB) 4. recv() -> manage_oob() returns the next skb of the consumed OOB -> This is also OOB, but unix_sk(sk)->oob_skb is not cleared 5. recv(MSG_OOB) -> unix_sk(sk)->oob_skb is used but already freed The recent commit 8594d9b85c07 ("af_unix: Don't call skb_get() for OOB skb.") uncovered the issue. If the OOB skb is consumed and the next skb is peeked in manage_oob(), we still need to check if the skb is OOB. Let's do so by falling back to the following checks in manage_oob() and add the test case in selftest. Note that we need to add a similar check for SIOCATMARK. [0]: BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa6/0xb0 net/unix/af_unix.c:2959 Read of size 4 at addr ffff8880326abcc4 by task syz-executor178/5235 CPU: 0 UID: 0 PID: 5235 Comm: syz-executor178 Not tainted 6.11.0-rc5-syzkaller-00742-gfbdaffe41adc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 unix_stream_read_actor+0xa6/0xb0 net/unix/af_unix.c:2959 unix_stream_recv_urg+0x1df/0x320 net/unix/af_unix.c:2640 unix_stream_read_generic+0x2456/0x2520 net/unix/af_unix.c:2778 unix_stream_recvmsg+0x22b/0x2c0 net/unix/af_unix.c:2996 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1068 ____sys_recvmsg+0x1db/0x470 net/socket.c:2816 ___sys_recvmsg net/socket.c:2858 [inline] __sys_recvmsg+0x2f0/0x3e0 net/socket.c:2888 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5360d6b4e9 Code: 48 83 c4 28 c3 e8 37 17 00 00 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff29b3a458 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 00007fff29b3a638 RCX: 00007f5360d6b4e9 RDX: 0000000000002001 RSI: 0000000020000640 RDI: 0000000000000003 RBP: 00007f5360dde610 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007fff29b3a628 R14: 0000000000000001 R15: 0000000000000001 </TASK> Allocated by task 5235: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4080 __alloc_skb+0x1c3/0x440 net/core/skbuff.c:667 alloc_skb include/linux/skbuff.h:1320 [inline] alloc_skb_with_frags+0xc3/0x770 net/core/skbuff.c:6528 sock_alloc_send_pskb+0x91a/0xa60 net/core/sock.c:2815 sock_alloc_send_skb include/net/sock.h:1778 [inline] queue_oob+0x108/0x680 net/unix/af_unix.c:2198 unix_stream_sendmsg+0xd24/0xf80 net/unix/af_unix.c:2351 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5235: kasan_save_stack mm/kasan/common.c:47 ---truncated--- |
| CVE-2024-47710 | In the Linux kernel, the following vulnerability has been resolved: sock_map: Add a cond_resched() in sock_hash_free() Several syzbot soft lockup reports all have in common sock_hash_free() If a map with a large number of buckets is destroyed, we need to yield the cpu when needed. |
| CVE-2024-47709 | In the Linux kernel, the following vulnerability has been resolved: can: bcm: Clear bo->bcm_proc_read after remove_proc_entry(). syzbot reported a warning in bcm_release(). [0] The blamed change fixed another warning that is triggered when connect() is issued again for a socket whose connect()ed device has been unregistered. However, if the socket is just close()d without the 2nd connect(), the remaining bo->bcm_proc_read triggers unnecessary remove_proc_entry() in bcm_release(). Let's clear bo->bcm_proc_read after remove_proc_entry() in bcm_notify(). [0] name '4986' WARNING: CPU: 0 PID: 5234 at fs/proc/generic.c:711 remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Modules linked in: CPU: 0 UID: 0 PID: 5234 Comm: syz-executor606 Not tainted 6.11.0-rc5-syzkaller-00178-g5517ae241919 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Code: ff eb 05 e8 cb 1e 5e ff 48 8b 5c 24 10 48 c7 c7 e0 f7 aa 8e e8 2a 38 8e 09 90 48 c7 c7 60 3a 1b 8c 48 89 de e8 da 42 20 ff 90 <0f> 0b 90 90 48 8b 44 24 18 48 c7 44 24 40 0e 36 e0 45 49 c7 04 07 RSP: 0018:ffffc9000345fa20 EFLAGS: 00010246 RAX: 2a2d0aee2eb64600 RBX: ffff888032f1f548 RCX: ffff888029431e00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000345fb08 R08: ffffffff8155b2f2 R09: 1ffff1101710519a R10: dffffc0000000000 R11: ffffed101710519b R12: ffff888011d38640 R13: 0000000000000004 R14: 0000000000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcfb52722f0 CR3: 000000000e734000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bcm_release+0x250/0x880 net/can/bcm.c:1578 __sock_release net/socket.c:659 [inline] sock_close+0xbc/0x240 net/socket.c:1421 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:228 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:882 do_group_exit+0x207/0x2c0 kernel/exit.c:1031 __do_sys_exit_group kernel/exit.c:1042 [inline] __se_sys_exit_group kernel/exit.c:1040 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcfb51ee969 Code: Unable to access opcode bytes at 0x7fcfb51ee93f. RSP: 002b:00007ffce0109ca8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fcfb51ee969 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001 RBP: 00007fcfb526f3b0 R08: ffffffffffffffb8 R09: 0000555500000000 R10: 0000555500000000 R11: 0000000000000246 R12: 00007fcfb526f3b0 R13: 0000000000000000 R14: 00007fcfb5271ee0 R15: 00007fcfb51bf160 </TASK> |
| CVE-2024-47708 | In the Linux kernel, the following vulnerability has been resolved: netkit: Assign missing bpf_net_context During the introduction of struct bpf_net_context handling for XDP-redirect, the netkit driver has been missed, which also requires it because NETKIT_REDIRECT invokes skb_do_redirect() which is accessing the per-CPU variables. Otherwise we see the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000038 bpf_redirect() netkit_xmit() dev_hard_start_xmit() Set the bpf_net_context before invoking netkit_xmit() program within the netkit driver. |
| CVE-2024-47707 | In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid possible NULL deref in rt6_uncached_list_flush_dev() Blamed commit accidentally removed a check for rt->rt6i_idev being NULL, as spotted by syzbot: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 10998 Comm: syz-executor Not tainted 6.11.0-rc6-syzkaller-00208-g625403177711 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:rt6_uncached_list_flush_dev net/ipv6/route.c:177 [inline] RIP: 0010:rt6_disable_ip+0x33e/0x7e0 net/ipv6/route.c:4914 Code: 41 80 3c 04 00 74 0a e8 90 d0 9b f7 48 8b 7c 24 08 48 8b 07 48 89 44 24 10 4c 89 f0 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 f7 e8 64 d0 9b f7 48 8b 44 24 18 49 39 06 RSP: 0018:ffffc900047374e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff1100fdf8f33 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88807efc78c0 RBP: ffffc900047375d0 R08: 0000000000000003 R09: fffff520008e6e8c R10: dffffc0000000000 R11: fffff520008e6e8c R12: 1ffff1100fdf8f18 R13: ffff88807efc7998 R14: 0000000000000000 R15: ffff88807efc7930 FS: 0000000000000000(0000) GS:ffff8880b8900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002a80 CR3: 0000000022f62000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> addrconf_ifdown+0x15d/0x1bd0 net/ipv6/addrconf.c:3856 addrconf_notify+0x3cb/0x1020 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 call_netdevice_notifiers_extack net/core/dev.c:2032 [inline] call_netdevice_notifiers net/core/dev.c:2046 [inline] unregister_netdevice_many_notify+0xd81/0x1c40 net/core/dev.c:11352 unregister_netdevice_many net/core/dev.c:11414 [inline] unregister_netdevice_queue+0x303/0x370 net/core/dev.c:11289 unregister_netdevice include/linux/netdevice.h:3129 [inline] __tun_detach+0x6b9/0x1600 drivers/net/tun.c:685 tun_detach drivers/net/tun.c:701 [inline] tun_chr_close+0x108/0x1b0 drivers/net/tun.c:3510 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:228 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:882 do_group_exit+0x207/0x2c0 kernel/exit.c:1031 __do_sys_exit_group kernel/exit.c:1042 [inline] __se_sys_exit_group kernel/exit.c:1040 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1acc77def9 Code: Unable to access opcode bytes at 0x7f1acc77decf. RSP: 002b:00007ffeb26fa738 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1acc77def9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000043 RBP: 00007f1acc7dd508 R08: 00007ffeb26f84d7 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000003 R14: 00000000ffffffff R15: 00007ffeb26fa8e0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:rt6_uncached_list_flush_dev net/ipv6/route.c:177 [inline] RIP: 0010:rt6_disable_ip+0x33e/0x7e0 net/ipv6/route.c:4914 Code: 41 80 3c 04 00 74 0a e8 90 d0 9b f7 48 8b 7c 24 08 48 8b 07 48 89 44 24 10 4c 89 f0 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 f7 e8 64 d0 9b f7 48 8b 44 24 18 49 39 06 RSP: 0018:ffffc900047374e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff1100fdf8f33 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88807efc78c0 R ---truncated--- |
| CVE-2024-47706 | In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix possible UAF for bfqq->bic with merge chain 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | Λ | Λ | Λ | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | Λ \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2 1 3) bfqq2 merged to bfqq3: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) here -> Λ | | \--------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3 process ref: 0 1 3 In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then get bfqq3 through merge chain, and finially handle IO by bfqq3. Howerver, current code will think bfqq2 is owned by BIC1, like initial state, and set bfqq2->bic to BIC1. bfq_insert_request -> by Process 1 bfqq = bfq_init_rq(rq) bfqq = bfq_get_bfqq_handle_split bfqq = bic_to_bfqq -> get bfqq2 from BIC1 bfqq->ref++ rq->elv.priv[0] = bic rq->elv.priv[1] = bfqq if (bfqq_process_refs(bfqq) == 1) bfqq->bic = bic -> record BIC1 to bfqq2 __bfq_insert_request new_bfqq = bfq_setup_cooperator -> get bfqq3 from bfqq2->new_bfqq bfqq_request_freed(bfqq) new_bfqq->ref++ rq->elv.priv[1] = new_bfqq -> handle IO by bfqq3 Fix the problem by checking bfqq is from merge chain fist. And this might fix a following problem reported by our syzkaller(unreproducible): ================================================================== BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595 CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_requeue_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x10d/0x610 mm/kasan/report.c:475 kasan_report+0x8e/0xc0 mm/kasan/report.c:588 bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757 bfq_init_rq block/bfq-iosched.c:6876 [inline] bfq_insert_request block/bfq-iosched.c:6254 [inline] bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304 blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593 blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 </TASK> Allocated by task 20776: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3458 [inline] kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503 ioc_create_icq block/blk-ioc.c:370 [inline] ---truncated--- |
| CVE-2024-47705 | In the Linux kernel, the following vulnerability has been resolved: block: fix potential invalid pointer dereference in blk_add_partition The blk_add_partition() function initially used a single if-condition (IS_ERR(part)) to check for errors when adding a partition. This was modified to handle the specific case of -ENXIO separately, allowing the function to proceed without logging the error in this case. However, this change unintentionally left a path where md_autodetect_dev() could be called without confirming that part is a valid pointer. This commit separates the error handling logic by splitting the initial if-condition, improving code readability and handling specific error scenarios explicitly. The function now distinguishes the general error case from -ENXIO without altering the existing behavior of md_autodetect_dev() calls. |
| CVE-2024-47704 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check link_res->hpo_dp_link_enc before using it [WHAT & HOW] Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res without initializing hpo_dp_link_enc and it is necessary to check for null before dereferencing. This fixes 2 FORWARD_NULL issues reported by Coverity. |
| CVE-2024-47703 | In the Linux kernel, the following vulnerability has been resolved: bpf, lsm: Add check for BPF LSM return value A bpf prog returning a positive number attached to file_alloc_security hook makes kernel panic. This happens because file system can not filter out the positive number returned by the LSM prog using IS_ERR, and misinterprets this positive number as a file pointer. Given that hook file_alloc_security never returned positive number before the introduction of BPF LSM, and other BPF LSM hooks may encounter similar issues, this patch adds LSM return value check in verifier, to ensure no unexpected value is returned. |
| CVE-2024-47702 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fail verification for sign-extension of packet data/data_end/data_meta syzbot reported a kernel crash due to commit 1f1e864b6555 ("bpf: Handle sign-extenstin ctx member accesses"). The reason is due to sign-extension of 32-bit load for packet data/data_end/data_meta uapi field. The original code looks like: r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */ r3 = *(u32 *)(r1 + 80) /* load __sk_buff->data_end */ r0 = r2 r0 += 8 if r3 > r0 goto +1 ... Note that __sk_buff->data load has 32-bit sign extension. After verification and convert_ctx_accesses(), the final asm code looks like: r2 = *(u64 *)(r1 +208) r2 = (s32)r2 r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 ... Note that 'r2 = (s32)r2' may make the kernel __sk_buff->data address invalid which may cause runtime failure. Currently, in C code, typically we have void *data = (void *)(long)skb->data; void *data_end = (void *)(long)skb->data_end; ... and it will generate r2 = *(u64 *)(r1 +208) r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 If we allow sign-extension, void *data = (void *)(long)(int)skb->data; void *data_end = (void *)(long)skb->data_end; ... the generated code looks like r2 = *(u64 *)(r1 +208) r2 <<= 32 r2 s>>= 32 r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 and this will cause verification failure since "r2 <<= 32" is not allowed as "r2" is a packet pointer. To fix this issue for case r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */ this patch added additional checking in is_valid_access() callback function for packet data/data_end/data_meta access. If those accesses are with sign-extenstion, the verification will fail. [1] https://lore.kernel.org/bpf/[email protected]/ |
| CVE-2024-47701 | In the Linux kernel, the following vulnerability has been resolved: ext4: avoid OOB when system.data xattr changes underneath the filesystem When looking up for an entry in an inlined directory, if e_value_offs is changed underneath the filesystem by some change in the block device, it will lead to an out-of-bounds access that KASAN detects as an UAF. EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none. loop0: detected capacity change from 2048 to 2047 ================================================================== BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 Read of size 1 at addr ffff88803e91130f by task syz-executor269/5103 CPU: 0 UID: 0 PID: 5103 Comm: syz-executor269 Not tainted 6.11.0-rc4-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 ext4_find_inline_entry+0x4be/0x5e0 fs/ext4/inline.c:1697 __ext4_find_entry+0x2b4/0x1b30 fs/ext4/namei.c:1573 ext4_lookup_entry fs/ext4/namei.c:1727 [inline] ext4_lookup+0x15f/0x750 fs/ext4/namei.c:1795 lookup_one_qstr_excl+0x11f/0x260 fs/namei.c:1633 filename_create+0x297/0x540 fs/namei.c:3980 do_symlinkat+0xf9/0x3a0 fs/namei.c:4587 __do_sys_symlinkat fs/namei.c:4610 [inline] __se_sys_symlinkat fs/namei.c:4607 [inline] __x64_sys_symlinkat+0x95/0xb0 fs/namei.c:4607 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f3e73ced469 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff4d40c258 EFLAGS: 00000246 ORIG_RAX: 000000000000010a RAX: ffffffffffffffda RBX: 0032656c69662f2e RCX: 00007f3e73ced469 RDX: 0000000020000200 RSI: 00000000ffffff9c RDI: 00000000200001c0 RBP: 0000000000000000 R08: 00007fff4d40c290 R09: 00007fff4d40c290 R10: 0023706f6f6c2f76 R11: 0000000000000246 R12: 00007fff4d40c27c R13: 0000000000000003 R14: 431bde82d7b634db R15: 00007fff4d40c2b0 </TASK> Calling ext4_xattr_ibody_find right after reading the inode with ext4_get_inode_loc will lead to a check of the validity of the xattrs, avoiding this problem. |
| CVE-2024-47700 | In the Linux kernel, the following vulnerability has been resolved: ext4: check stripe size compatibility on remount as well We disable stripe size in __ext4_fill_super if it is not a multiple of the cluster ratio however this check is missed when trying to remount. This can leave us with cases where stripe < cluster_ratio after remount:set making EXT4_B2C(sbi->s_stripe) become 0 that can cause some unforeseen bugs like divide by 0. Fix that by adding the check in remount path as well. |
| CVE-2024-47699 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() Patch series "nilfs2: fix potential issues with empty b-tree nodes". This series addresses three potential issues with empty b-tree nodes that can occur with corrupted filesystem images, including one recently discovered by syzbot. This patch (of 3): If a b-tree is broken on the device, and the b-tree height is greater than 2 (the level of the root node is greater than 1) even if the number of child nodes of the b-tree root is 0, a NULL pointer dereference occurs in nilfs_btree_prepare_insert(), which is called from nilfs_btree_insert(). This is because, when the number of child nodes of the b-tree root is 0, nilfs_btree_do_lookup() does not set the block buffer head in any of path[x].bp_bh, leaving it as the initial value of NULL, but if the level of the b-tree root node is greater than 1, nilfs_btree_get_nonroot_node(), which accesses the buffer memory of path[x].bp_bh, is called. Fix this issue by adding a check to nilfs_btree_root_broken(), which performs sanity checks when reading the root node from the device, to detect this inconsistency. Thanks to Lizhi Xu for trying to solve the bug and clarifying the cause early on. |
| CVE-2024-47698 | In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error Ensure index in rtl2832_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. [hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg] |
| CVE-2024-47697 | In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error Ensure index in rtl2830_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. |
| CVE-2024-47696 | In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs"), the function flush_workqueue is invoked to flush the work queue iwcm_wq. But at that time, the work queue iwcm_wq was created via the function alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM. Because the current process is trying to flush the whole iwcm_wq, if iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current process is not reclaiming memory or running on a workqueue which doesn't have the flag WQ_MEM_RECLAIM as that can break forward-progress guarantee leading to a deadlock. The call trace is as below: [ 125.350876][ T1430] Call Trace: [ 125.356281][ T1430] <TASK> [ 125.361285][ T1430] ? __warn (kernel/panic.c:693) [ 125.367640][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.375689][ T1430] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 125.382505][ T1430] ? handle_bug (arch/x86/kernel/traps.c:239) [ 125.388987][ T1430] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 125.395831][ T1430] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 125.403125][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.410984][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.418764][ T1430] __flush_workqueue (kernel/workqueue.c:3970) [ 125.426021][ T1430] ? __pfx___might_resched (kernel/sched/core.c:10151) [ 125.433431][ T1430] ? destroy_cm_id (drivers/infiniband/core/iwcm.c:375) iw_cm [ 125.441209][ T1430] ? __pfx___flush_workqueue (kernel/workqueue.c:3910) [ 125.473900][ T1430] ? _raw_spin_lock_irqsave (arch/x86/include/asm/atomic.h:107 include/linux/atomic/atomic-arch-fallback.h:2170 include/linux/atomic/atomic-instrumented.h:1302 include/asm-generic/qspinlock.h:111 include/linux/spinlock.h:187 include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 125.473909][ T1430] ? __pfx__raw_spin_lock_irqsave (kernel/locking/spinlock.c:161) [ 125.482537][ T1430] _destroy_id (drivers/infiniband/core/cma.c:2044) rdma_cm [ 125.495072][ T1430] nvme_rdma_free_queue (drivers/nvme/host/rdma.c:656 drivers/nvme/host/rdma.c:650) nvme_rdma [ 125.505827][ T1430] nvme_rdma_reset_ctrl_work (drivers/nvme/host/rdma.c:2180) nvme_rdma [ 125.505831][ T1430] process_one_work (kernel/workqueue.c:3231) [ 125.515122][ T1430] worker_thread (kernel/workqueue.c:3306 kernel/workqueue.c:3393) [ 125.515127][ T1430] ? __pfx_worker_thread (kernel/workqueue.c:3339) [ 125.531837][ T1430] kthread (kernel/kthread.c:389) [ 125.539864][ T1430] ? __pfx_kthread (kernel/kthread.c:342) [ 125.550628][ T1430] ret_from_fork (arch/x86/kernel/process.c:147) [ 125.558840][ T1430] ? __pfx_kthread (kernel/kthread.c:342) [ 125.558844][ T1430] ret_from_fork_asm (arch/x86/entry/entry_64.S:257) [ 125.566487][ T1430] </TASK> [ 125.566488][ T1430] ---[ end trace 0000000000000000 ]--- |
| CVE-2024-47695 | In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-clt: Reset cid to con_num - 1 to stay in bounds In the function init_conns(), after the create_con() and create_cm() for loop if something fails. In the cleanup for loop after the destroy tag, we access out of bound memory because cid is set to clt_path->s.con_num. This commits resets the cid to clt_path->s.con_num - 1, to stay in bounds in the cleanup loop later. |
| CVE-2024-47694 | In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix UMR pd cleanup on error flow of driver init The cited commit moves the pd allocation from function mlx5r_umr_resource_cleanup() to a new function mlx5r_umr_cleanup(). So the fix in commit [1] is broken. In error flow, will hit panic [2]. Fix it by checking pd pointer to avoid panic if it is NULL; [1] RDMA/mlx5: Fix UMR cleanup on error flow of driver init [2] [ 347.567063] infiniband mlx5_0: Couldn't register device with driver model [ 347.591382] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 347.593438] #PF: supervisor read access in kernel mode [ 347.595176] #PF: error_code(0x0000) - not-present page [ 347.596962] PGD 0 P4D 0 [ 347.601361] RIP: 0010:ib_dealloc_pd_user+0x12/0xc0 [ib_core] [ 347.604171] RSP: 0018:ffff888106293b10 EFLAGS: 00010282 [ 347.604834] RAX: 0000000000000000 RBX: 000000000000000e RCX: 0000000000000000 [ 347.605672] RDX: ffff888106293ad0 RSI: 0000000000000000 RDI: 0000000000000000 [ 347.606529] RBP: 0000000000000000 R08: ffff888106293ae0 R09: ffff888106293ae0 [ 347.607379] R10: 0000000000000a06 R11: 0000000000000000 R12: 0000000000000000 [ 347.608224] R13: ffffffffa0704dc0 R14: 0000000000000001 R15: 0000000000000001 [ 347.609067] FS: 00007fdc720cd9c0(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000 [ 347.610094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 347.610727] CR2: 0000000000000020 CR3: 0000000103012003 CR4: 0000000000370eb0 [ 347.611421] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 347.612113] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 347.612804] Call Trace: [ 347.613130] <TASK> [ 347.613417] ? __die+0x20/0x60 [ 347.613793] ? page_fault_oops+0x150/0x3e0 [ 347.614243] ? free_msg+0x68/0x80 [mlx5_core] [ 347.614840] ? cmd_exec+0x48f/0x11d0 [mlx5_core] [ 347.615359] ? exc_page_fault+0x74/0x130 [ 347.615808] ? asm_exc_page_fault+0x22/0x30 [ 347.616273] ? ib_dealloc_pd_user+0x12/0xc0 [ib_core] [ 347.616801] mlx5r_umr_cleanup+0x23/0x90 [mlx5_ib] [ 347.617365] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x36/0x40 [mlx5_ib] [ 347.618025] __mlx5_ib_add+0x96/0xd0 [mlx5_ib] [ 347.618539] mlx5r_probe+0xe9/0x310 [mlx5_ib] [ 347.619032] ? kernfs_add_one+0x107/0x150 [ 347.619478] ? __mlx5_ib_add+0xd0/0xd0 [mlx5_ib] [ 347.619984] auxiliary_bus_probe+0x3e/0x90 [ 347.620448] really_probe+0xc5/0x3a0 [ 347.620857] __driver_probe_device+0x80/0x160 [ 347.621325] driver_probe_device+0x1e/0x90 [ 347.621770] __driver_attach+0xec/0x1c0 [ 347.622213] ? __device_attach_driver+0x100/0x100 [ 347.622724] bus_for_each_dev+0x71/0xc0 [ 347.623151] bus_add_driver+0xed/0x240 [ 347.623570] driver_register+0x58/0x100 [ 347.623998] __auxiliary_driver_register+0x6a/0xc0 [ 347.624499] ? driver_register+0xae/0x100 [ 347.624940] ? 0xffffffffa0893000 [ 347.625329] mlx5_ib_init+0x16a/0x1e0 [mlx5_ib] [ 347.625845] do_one_initcall+0x4a/0x2a0 [ 347.626273] ? gcov_event+0x2e2/0x3a0 [ 347.626706] do_init_module+0x8a/0x260 [ 347.627126] init_module_from_file+0x8b/0xd0 [ 347.627596] __x64_sys_finit_module+0x1ca/0x2f0 [ 347.628089] do_syscall_64+0x4c/0x100 |
| CVE-2024-47693 | In the Linux kernel, the following vulnerability has been resolved: IB/core: Fix ib_cache_setup_one error flow cleanup When ib_cache_update return an error, we exit ib_cache_setup_one instantly with no proper cleanup, even though before this we had already successfully done gid_table_setup_one, that results in the kernel WARN below. Do proper cleanup using gid_table_cleanup_one before returning the err in order to fix the issue. WARNING: CPU: 4 PID: 922 at drivers/infiniband/core/cache.c:806 gid_table_release_one+0x181/0x1a0 Modules linked in: CPU: 4 UID: 0 PID: 922 Comm: c_repro Not tainted 6.11.0-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:gid_table_release_one+0x181/0x1a0 Code: 44 8b 38 75 0c e8 2f cb 34 ff 4d 8b b5 28 05 00 00 e8 23 cb 34 ff 44 89 f9 89 da 4c 89 f6 48 c7 c7 d0 58 14 83 e8 4f de 21 ff <0f> 0b 4c 8b 75 30 e9 54 ff ff ff 48 8 3 c4 10 5b 5d 41 5c 41 5d 41 RSP: 0018:ffffc90002b835b0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff811c8527 RDX: 0000000000000000 RSI: ffffffff811c8534 RDI: 0000000000000001 RBP: ffff8881011b3d00 R08: ffff88810b3abe00 R09: 205d303839303631 R10: 666572207972746e R11: 72746e6520444947 R12: 0000000000000001 R13: ffff888106390000 R14: ffff8881011f2110 R15: 0000000000000001 FS: 00007fecc3b70800(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000340 CR3: 000000010435a001 CR4: 00000000003706b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x94/0xa0 ? __warn+0x9e/0x1c0 ? gid_table_release_one+0x181/0x1a0 ? report_bug+0x1f9/0x340 ? gid_table_release_one+0x181/0x1a0 ? handle_bug+0xa2/0x110 ? exc_invalid_op+0x31/0xa0 ? asm_exc_invalid_op+0x16/0x20 ? __warn_printk+0xc7/0x180 ? __warn_printk+0xd4/0x180 ? gid_table_release_one+0x181/0x1a0 ib_device_release+0x71/0xe0 ? __pfx_ib_device_release+0x10/0x10 device_release+0x44/0xd0 kobject_put+0x135/0x3d0 put_device+0x20/0x30 rxe_net_add+0x7d/0xa0 rxe_newlink+0xd7/0x190 nldev_newlink+0x1b0/0x2a0 ? __pfx_nldev_newlink+0x10/0x10 rdma_nl_rcv_msg+0x1ad/0x2e0 rdma_nl_rcv_skb.constprop.0+0x176/0x210 netlink_unicast+0x2de/0x400 netlink_sendmsg+0x306/0x660 __sock_sendmsg+0x110/0x120 ____sys_sendmsg+0x30e/0x390 ___sys_sendmsg+0x9b/0xf0 ? kstrtouint+0x6e/0xa0 ? kstrtouint_from_user+0x7c/0xb0 ? get_pid_task+0xb0/0xd0 ? proc_fail_nth_write+0x5b/0x140 ? __fget_light+0x9a/0x200 ? preempt_count_add+0x47/0xa0 __sys_sendmsg+0x61/0xd0 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| CVE-2024-47692 | In the Linux kernel, the following vulnerability has been resolved: nfsd: return -EINVAL when namelen is 0 When we have a corrupted main.sqlite in /var/lib/nfs/nfsdcld/, it may result in namelen being 0, which will cause memdup_user() to return ZERO_SIZE_PTR. When we access the name.data that has been assigned the value of ZERO_SIZE_PTR in nfs4_client_to_reclaim(), null pointer dereference is triggered. [ T1205] ================================================================== [ T1205] BUG: KASAN: null-ptr-deref in nfs4_client_to_reclaim+0xe9/0x260 [ T1205] Read of size 1 at addr 0000000000000010 by task nfsdcld/1205 [ T1205] [ T1205] CPU: 11 PID: 1205 Comm: nfsdcld Not tainted 5.10.0-00003-g2c1423731b8d #406 [ T1205] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ T1205] Call Trace: [ T1205] dump_stack+0x9a/0xd0 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] __kasan_report.cold+0x34/0x84 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] kasan_report+0x3a/0x50 [ T1205] nfs4_client_to_reclaim+0xe9/0x260 [ T1205] ? nfsd4_release_lockowner+0x410/0x410 [ T1205] cld_pipe_downcall+0x5ca/0x760 [ T1205] ? nfsd4_cld_tracking_exit+0x1d0/0x1d0 [ T1205] ? down_write_killable_nested+0x170/0x170 [ T1205] ? avc_policy_seqno+0x28/0x40 [ T1205] ? selinux_file_permission+0x1b4/0x1e0 [ T1205] rpc_pipe_write+0x84/0xb0 [ T1205] vfs_write+0x143/0x520 [ T1205] ksys_write+0xc9/0x170 [ T1205] ? __ia32_sys_read+0x50/0x50 [ T1205] ? ktime_get_coarse_real_ts64+0xfe/0x110 [ T1205] ? ktime_get_coarse_real_ts64+0xa2/0x110 [ T1205] do_syscall_64+0x33/0x40 [ T1205] entry_SYSCALL_64_after_hwframe+0x67/0xd1 [ T1205] RIP: 0033:0x7fdbdb761bc7 [ T1205] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 514 [ T1205] RSP: 002b:00007fff8c4b7248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ T1205] RAX: ffffffffffffffda RBX: 000000000000042b RCX: 00007fdbdb761bc7 [ T1205] RDX: 000000000000042b RSI: 00007fff8c4b75f0 RDI: 0000000000000008 [ T1205] RBP: 00007fdbdb761bb0 R08: 0000000000000000 R09: 0000000000000001 [ T1205] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000042b [ T1205] R13: 0000000000000008 R14: 00007fff8c4b75f0 R15: 0000000000000000 [ T1205] ================================================================== Fix it by checking namelen. |
| CVE-2024-47691 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use-after-free in f2fs_stop_gc_thread() syzbot reports a f2fs bug as below: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_report+0xe8/0x550 mm/kasan/report.c:491 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_fetch_add_relaxed include/linux/atomic/atomic-instrumented.h:252 [inline] __refcount_add include/linux/refcount.h:184 [inline] __refcount_inc include/linux/refcount.h:241 [inline] refcount_inc include/linux/refcount.h:258 [inline] get_task_struct include/linux/sched/task.h:118 [inline] kthread_stop+0xca/0x630 kernel/kthread.c:704 f2fs_stop_gc_thread+0x65/0xb0 fs/f2fs/gc.c:210 f2fs_do_shutdown+0x192/0x540 fs/f2fs/file.c:2283 f2fs_ioc_shutdown fs/f2fs/file.c:2325 [inline] __f2fs_ioctl+0x443a/0xbe60 fs/f2fs/file.c:4325 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is below race condition, it may cause use-after-free issue in sbi->gc_th pointer. - remount - f2fs_remount - f2fs_stop_gc_thread - kfree(gc_th) - f2fs_ioc_shutdown - f2fs_do_shutdown - f2fs_stop_gc_thread - kthread_stop(gc_th->f2fs_gc_task) : sbi->gc_thread = NULL; We will call f2fs_do_shutdown() in two paths: - for f2fs_ioc_shutdown() path, we should grab sb->s_umount semaphore for fixing. - for f2fs_shutdown() path, it's safe since caller has already grabbed sb->s_umount semaphore. |
| CVE-2024-47690 | In the Linux kernel, the following vulnerability has been resolved: f2fs: get rid of online repaire on corrupted directory syzbot reports a f2fs bug as below: kernel BUG at fs/f2fs/inode.c:896! RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896 Call Trace: evict+0x532/0x950 fs/inode.c:704 dispose_list fs/inode.c:747 [inline] evict_inodes+0x5f9/0x690 fs/inode.c:797 generic_shutdown_super+0x9d/0x2d0 fs/super.c:627 kill_block_super+0x44/0x90 fs/super.c:1696 kill_f2fs_super+0x344/0x690 fs/f2fs/super.c:4898 deactivate_locked_super+0xc4/0x130 fs/super.c:473 cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373 task_work_run+0x24f/0x310 kernel/task_work.c:228 ptrace_notify+0x2d2/0x380 kernel/signal.c:2402 ptrace_report_syscall include/linux/ptrace.h:415 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline] syscall_exit_work+0xc6/0x190 kernel/entry/common.c:173 syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline] syscall_exit_to_user_mode+0x279/0x370 kernel/entry/common.c:218 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896 Online repaire on corrupted directory in f2fs_lookup() can generate dirty data/meta while racing w/ readonly remount, it may leave dirty inode after filesystem becomes readonly, however, checkpoint() will skips flushing dirty inode in a state of readonly mode, result in above panic. Let's get rid of online repaire in f2fs_lookup(), and leave the work to fsck.f2fs. |
| CVE-2024-47689 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to don't set SB_RDONLY in f2fs_handle_critical_error() syzbot reports a f2fs bug as below: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 58 at kernel/rcu/sync.c:177 rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177 CPU: 1 UID: 0 PID: 58 Comm: kworker/1:2 Not tainted 6.10.0-syzkaller-12562-g1722389b0d86 #0 Workqueue: events destroy_super_work RIP: 0010:rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177 Call Trace: percpu_free_rwsem+0x41/0x80 kernel/locking/percpu-rwsem.c:42 destroy_super_work+0xec/0x130 fs/super.c:282 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd40 kernel/workqueue.c:3390 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 As Christian Brauner pointed out [1]: the root cause is f2fs sets SB_RDONLY flag in internal function, rather than setting the flag covered w/ sb->s_umount semaphore via remount procedure, then below race condition causes this bug: - freeze_super() - sb_wait_write(sb, SB_FREEZE_WRITE) - sb_wait_write(sb, SB_FREEZE_PAGEFAULT) - sb_wait_write(sb, SB_FREEZE_FS) - f2fs_handle_critical_error - sb->s_flags |= SB_RDONLY - thaw_super - thaw_super_locked - sb_rdonly() is true, so it skips sb_freeze_unlock(sb, SB_FREEZE_FS) - deactivate_locked_super Since f2fs has almost the same logic as ext4 [2] when handling critical error in filesystem if it mounts w/ errors=remount-ro option: - set CP_ERROR_FLAG flag which indicates filesystem is stopped - record errors to superblock - set SB_RDONLY falg Once we set CP_ERROR_FLAG flag, all writable interfaces can detect the flag and stop any further updates on filesystem. So, it is safe to not set SB_RDONLY flag, let's remove the logic and keep in line w/ ext4 [3]. [1] https://lore.kernel.org/all/20240729-himbeeren-funknetz-96e62f9c7aee@brauner [2] https://lore.kernel.org/all/20240729132721.hxih6ehigadqf7wx@quack3 [3] https://lore.kernel.org/linux-ext4/[email protected] |
| CVE-2024-47688 | In the Linux kernel, the following vulnerability has been resolved: driver core: Fix a potential null-ptr-deref in module_add_driver() Inject fault while probing of-fpga-region, if kasprintf() fails in module_add_driver(), the second sysfs_remove_link() in exit path will cause null-ptr-deref as below because kernfs_name_hash() will call strlen() with NULL driver_name. Fix it by releasing resources based on the exit path sequence. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfffffc000000000] address between user and kernel address ranges Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: of_fpga_region(+) fpga_region fpga_bridge cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: of_fpga_region] CPU: 2 UID: 0 PID: 2036 Comm: modprobe Not tainted 6.11.0-rc2-g6a0e38264012 #295 Hardware name: linux,dummy-virt (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : strlen+0x24/0xb0 lr : kernfs_name_hash+0x1c/0xc4 sp : ffffffc081f97380 x29: ffffffc081f97380 x28: ffffffc081f97b90 x27: ffffff80c821c2a0 x26: ffffffedac0be418 x25: 0000000000000000 x24: ffffff80c09d2000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000001840 x17: 0000000000000000 x16: 0000000000000000 x15: 1ffffff8103f2e42 x14: 00000000f1f1f1f1 x13: 0000000000000004 x12: ffffffb01812d61d x11: 1ffffff01812d61c x10: ffffffb01812d61c x9 : dfffffc000000000 x8 : 0000004fe7ed29e4 x7 : ffffff80c096b0e7 x6 : 0000000000000001 x5 : ffffff80c096b0e0 x4 : 1ffffffdb990efa2 x3 : 0000000000000000 x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000000 Call trace: strlen+0x24/0xb0 kernfs_name_hash+0x1c/0xc4 kernfs_find_ns+0x118/0x2e8 kernfs_remove_by_name_ns+0x80/0x100 sysfs_remove_link+0x74/0xa8 module_add_driver+0x278/0x394 bus_add_driver+0x1f0/0x43c driver_register+0xf4/0x3c0 __platform_driver_register+0x60/0x88 of_fpga_region_init+0x20/0x1000 [of_fpga_region] do_one_initcall+0x110/0x788 do_init_module+0x1dc/0x5c8 load_module+0x3c38/0x4cac init_module_from_file+0xd4/0x128 idempotent_init_module+0x2cc/0x528 __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x48/0xb8 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: f2fbffe1 a90157f4 12000802 aa0003f5 (38e16861) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception |
| CVE-2024-47687 | In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: Fix invalid mr resource destroy Certain error paths from mlx5_vdpa_dev_add() can end up releasing mr resources which never got initialized in the first place. This patch adds the missing check in mlx5_vdpa_destroy_mr_resources() to block releasing non-initialized mr resources. Reference trace: mlx5_core 0000:08:00.2: mlx5_vdpa_dev_add:3274:(pid 2700) warning: No mac address provisioned? BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 140216067 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 8 PID: 2700 Comm: vdpa Kdump: loaded Not tainted 5.14.0-496.el9.x86_64 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb] Code: [...] RSP: 0018:ff1c823ac23077f0 EFLAGS: 00010246 RAX: ffffffffc1a21a60 RBX: ffffffff899567a0 RCX: 0000000000000000 RDX: ffffffffffffffff RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff1bda1f7c21e800 R08: 0000000000000000 R09: ff1c823ac2307670 R10: ff1c823ac2307668 R11: ffffffff8a9e7b68 R12: 0000000000000000 R13: 0000000000000000 R14: ff1bda1f43e341a0 R15: 00000000ffffffea FS: 00007f56eba7c740(0000) GS:ff1bda269f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000104d90001 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa] ? __die_body.cold+0x8/0xd ? page_fault_oops+0x134/0x170 ? __irq_work_queue_local+0x2b/0xc0 ? irq_work_queue+0x2c/0x50 ? exc_page_fault+0x62/0x150 ? asm_exc_page_fault+0x22/0x30 ? __pfx_mlx5_vdpa_free+0x10/0x10 [mlx5_vdpa] ? vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb] mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_cleanup+0x37/0x130 mlx5_vdpa_dev_add+0x2d2/0x7a0 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x277/0x4c0 [vdpa] genl_family_rcv_msg_doit+0xd9/0x130 genl_family_rcv_msg+0x14d/0x220 ? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa] ? _copy_to_user+0x1a/0x30 ? move_addr_to_user+0x4b/0xe0 genl_rcv_msg+0x47/0xa0 ? __import_iovec+0x46/0x150 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x245/0x370 netlink_sendmsg+0x206/0x440 __sys_sendto+0x1dc/0x1f0 ? do_read_fault+0x10c/0x1d0 ? do_pte_missing+0x10d/0x190 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x5c/0xf0 ? __count_memcg_events+0x4f/0xb0 ? mm_account_fault+0x6c/0x100 ? handle_mm_fault+0x116/0x270 ? do_user_addr_fault+0x1d6/0x6a0 ? do_syscall_64+0x6b/0xf0 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 entry_SYSCALL_64_after_hwframe+0x78/0x80 |
| CVE-2024-47686 | In the Linux kernel, the following vulnerability has been resolved: ep93xx: clock: Fix off by one in ep93xx_div_recalc_rate() The psc->div[] array has psc->num_div elements. These values come from when we call clk_hw_register_div(). It's adc_divisors and ARRAY_SIZE(adc_divisors)) and so on. So this condition needs to be >= instead of > to prevent an out of bounds read. |
| CVE-2024-47685 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put() syzbot reported that nf_reject_ip6_tcphdr_put() was possibly sending garbage on the four reserved tcp bits (th->res1) Use skb_put_zero() to clear the whole TCP header, as done in nf_reject_ip_tcphdr_put() BUG: KMSAN: uninit-value in nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 do_softirq+0x9a/0x100 kernel/softirq.c:455 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x2692/0x5610 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_resolve_output+0x9ca/0xae0 net/core/neighbour.c:1565 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x2347/0x2ba0 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0xbb8/0x14b0 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x356/0x620 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0x1ba6/0x25d0 net/ipv6/ip6_output.c:366 inet6_csk_xmit+0x442/0x530 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x3b07/0x4880 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_connect+0x35b6/0x7130 net/ipv4/tcp_output.c:4143 tcp_v6_connect+0x1bcc/0x1e40 net/ipv6/tcp_ipv6.c:333 __inet_stream_connect+0x2ef/0x1730 net/ipv4/af_inet.c:679 inet_stream_connect+0x6a/0xd0 net/ipv4/af_inet.c:750 __sys_connect_file net/socket.c:2061 [inline] __sys_connect+0x606/0x690 net/socket.c:2078 __do_sys_connect net/socket.c:2088 [inline] __se_sys_connect net/socket.c:2085 [inline] __x64_sys_connect+0x91/0xe0 net/socket.c:2085 x64_sys_call+0x27a5/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:43 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: nf_reject_ip6_tcphdr_put+0x60c/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:249 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core ---truncated--- |
| CVE-2024-47684 | In the Linux kernel, the following vulnerability has been resolved: tcp: check skb is non-NULL in tcp_rto_delta_us() We have some machines running stock Ubuntu 20.04.6 which is their 5.4.0-174-generic kernel that are running ceph and recently hit a null ptr dereference in tcp_rearm_rto(). Initially hitting it from the TLP path, but then later we also saw it getting hit from the RACK case as well. Here are examples of the oops messages we saw in each of those cases: Jul 26 15:05:02 rx [11061395.780353] BUG: kernel NULL pointer dereference, address: 0000000000000020 Jul 26 15:05:02 rx [11061395.787572] #PF: supervisor read access in kernel mode Jul 26 15:05:02 rx [11061395.792971] #PF: error_code(0x0000) - not-present page Jul 26 15:05:02 rx [11061395.798362] PGD 0 P4D 0 Jul 26 15:05:02 rx [11061395.801164] Oops: 0000 [#1] SMP NOPTI Jul 26 15:05:02 rx [11061395.805091] CPU: 0 PID: 9180 Comm: msgr-worker-1 Tainted: G W 5.4.0-174-generic #193-Ubuntu Jul 26 15:05:02 rx [11061395.814996] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Jul 26 15:05:02 rx [11061395.825952] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.830656] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Jul 26 15:05:02 rx [11061395.849665] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246 Jul 26 15:05:02 rx [11061395.855149] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Jul 26 15:05:02 rx [11061395.862542] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60 Jul 26 15:05:02 rx [11061395.869933] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8 Jul 26 15:05:02 rx [11061395.877318] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900 Jul 26 15:05:02 rx [11061395.884710] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30 Jul 26 15:05:02 rx [11061395.892095] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000 Jul 26 15:05:02 rx [11061395.900438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 15:05:02 rx [11061395.906435] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0 Jul 26 15:05:02 rx [11061395.913822] PKRU: 55555554 Jul 26 15:05:02 rx [11061395.916786] Call Trace: Jul 26 15:05:02 rx [11061395.919488] Jul 26 15:05:02 rx [11061395.921765] ? show_regs.cold+0x1a/0x1f Jul 26 15:05:02 rx [11061395.925859] ? __die+0x90/0xd9 Jul 26 15:05:02 rx [11061395.929169] ? no_context+0x196/0x380 Jul 26 15:05:02 rx [11061395.933088] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0 Jul 26 15:05:02 rx [11061395.938216] ? ip6_sublist_rcv_finish+0x3d/0x50 Jul 26 15:05:02 rx [11061395.943000] ? __bad_area_nosemaphore+0x50/0x1a0 Jul 26 15:05:02 rx [11061395.947873] ? bad_area_nosemaphore+0x16/0x20 Jul 26 15:05:02 rx [11061395.952486] ? do_user_addr_fault+0x267/0x450 Jul 26 15:05:02 rx [11061395.957104] ? ipv6_list_rcv+0x112/0x140 Jul 26 15:05:02 rx [11061395.961279] ? __do_page_fault+0x58/0x90 Jul 26 15:05:02 rx [11061395.965458] ? do_page_fault+0x2c/0xe0 Jul 26 15:05:02 rx [11061395.969465] ? page_fault+0x34/0x40 Jul 26 15:05:02 rx [11061395.973217] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.977313] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.981408] tcp_send_loss_probe+0x10b/0x220 Jul 26 15:05:02 rx [11061395.985937] tcp_write_timer_handler+0x1b4/0x240 Jul 26 15:05:02 rx [11061395.990809] tcp_write_timer+0x9e/0xe0 Jul 26 15:05:02 rx [11061395.994814] ? tcp_write_timer_handler+0x240/0x240 Jul 26 15:05:02 rx [11061395.999866] call_timer_fn+0x32/0x130 Jul 26 15:05:02 rx [11061396.003782] __run_timers.part.0+0x180/0x280 Jul 26 15:05:02 rx [11061396.008309] ? recalibrate_cpu_khz+0x10/0x10 Jul 26 15:05:02 rx [11061396.012841] ? native_x2apic_icr_write+0x30/0x30 Jul 26 15:05:02 rx [11061396.017718] ? lapic_next_even ---truncated--- |
| CVE-2024-47683 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip Recompute DSC Params if no Stream on Link [why] Encounter NULL pointer dereference uner mst + dsc setup. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 [how] dsc recompute should be skipped if no mode change detected on the new request. If detected, keep checking whether the stream is already on current state or not. |
| CVE-2024-47682 | In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix off-by-one error in sd_read_block_characteristics() Ff the device returns page 0xb1 with length 8 (happens with qemu v2.x, for example), sd_read_block_characteristics() may attempt an out-of-bounds memory access when accessing the zoned field at offset 8. |
| CVE-2024-47681 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix NULL pointer dereference in mt7996_mcu_sta_bfer_he Fix the NULL pointer dereference in mt7996_mcu_sta_bfer_he routine adding an sta interface to the mt7996 driver. Found by code review. |
| CVE-2024-47680 | In the Linux kernel, the following vulnerability has been resolved: f2fs: check discard support for conventional zones As the helper function f2fs_bdev_support_discard() shows, f2fs checks if the target block devices support discard by calling bdev_max_discard_sectors() and bdev_is_zoned(). This check works well for most cases, but it does not work for conventional zones on zoned block devices. F2fs assumes that zoned block devices support discard, and calls __submit_discard_cmd(). When __submit_discard_cmd() is called for sequential write required zones, it works fine since __submit_discard_cmd() issues zone reset commands instead of discard commands. However, when __submit_discard_cmd() is called for conventional zones, __blkdev_issue_discard() is called even when the devices do not support discard. The inappropriate __blkdev_issue_discard() call was not a problem before the commit 30f1e7241422 ("block: move discard checks into the ioctl handler") because __blkdev_issue_discard() checked if the target devices support discard or not. If not, it returned EOPNOTSUPP. After the commit, __blkdev_issue_discard() no longer checks it. It always returns zero and sets NULL to the given bio pointer. This NULL pointer triggers f2fs_bug_on() in __submit_discard_cmd(). The BUG is recreated with the commands below at the umount step, where /dev/nullb0 is a zoned null_blk with 5GB total size, 128MB zone size and 10 conventional zones. $ mkfs.f2fs -f -m /dev/nullb0 $ mount /dev/nullb0 /mnt $ for ((i=0;i<5;i++)); do dd if=/dev/zero of=/mnt/test bs=65536 count=1600 conv=fsync; done $ umount /mnt To fix the BUG, avoid the inappropriate __blkdev_issue_discard() call. When discard is requested for conventional zones, check if the device supports discard or not. If not, return EOPNOTSUPP. |
| CVE-2024-47679 | In the Linux kernel, the following vulnerability has been resolved: vfs: fix race between evice_inodes() and find_inode()&iput() Hi, all Recently I noticed a bug[1] in btrfs, after digged it into and I believe it'a race in vfs. Let's assume there's a inode (ie ino 261) with i_count 1 is called by iput(), and there's a concurrent thread calling generic_shutdown_super(). cpu0: cpu1: iput() // i_count is 1 ->spin_lock(inode) ->dec i_count to 0 ->iput_final() generic_shutdown_super() ->__inode_add_lru() ->evict_inodes() // cause some reason[2] ->if (atomic_read(inode->i_count)) continue; // return before // inode 261 passed the above check // list_lru_add_obj() // and then schedule out ->spin_unlock() // note here: the inode 261 // was still at sb list and hash list, // and I_FREEING|I_WILL_FREE was not been set btrfs_iget() // after some function calls ->find_inode() // found the above inode 261 ->spin_lock(inode) // check I_FREEING|I_WILL_FREE // and passed ->__iget() ->spin_unlock(inode) // schedule back ->spin_lock(inode) // check (I_NEW|I_FREEING|I_WILL_FREE) flags, // passed and set I_FREEING iput() ->spin_unlock(inode) ->spin_lock(inode) ->evict() // dec i_count to 0 ->iput_final() ->spin_unlock() ->evict() Now, we have two threads simultaneously evicting the same inode, which may trigger the BUG(inode->i_state & I_CLEAR) statement both within clear_inode() and iput(). To fix the bug, recheck the inode->i_count after holding i_lock. Because in the most scenarios, the first check is valid, and the overhead of spin_lock() can be reduced. If there is any misunderstanding, please let me know, thanks. [1]: https://lore.kernel.org/linux-btrfs/[email protected]/ [2]: The reason might be 1. SB_ACTIVE was removed or 2. mapping_shrinkable() return false when I reproduced the bug. |
| CVE-2024-47678 | In the Linux kernel, the following vulnerability has been resolved: icmp: change the order of rate limits ICMP messages are ratelimited : After the blamed commits, the two rate limiters are applied in this order: 1) host wide ratelimit (icmp_global_allow()) 2) Per destination ratelimit (inetpeer based) In order to avoid side-channels attacks, we need to apply the per destination check first. This patch makes the following change : 1) icmp_global_allow() checks if the host wide limit is reached. But credits are not yet consumed. This is deferred to 3) 2) The per destination limit is checked/updated. This might add a new node in inetpeer tree. 3) icmp_global_consume() consumes tokens if prior operations succeeded. This means that host wide ratelimit is still effective in keeping inetpeer tree small even under DDOS. As a bonus, I removed icmp_global.lock as the fast path can use a lock-free operation. |
| CVE-2024-47677 | In the Linux kernel, the following vulnerability has been resolved: exfat: resolve memory leak from exfat_create_upcase_table() If exfat_load_upcase_table reaches end and returns -EINVAL, allocated memory doesn't get freed and while exfat_load_default_upcase_table allocates more memory, leading to a memory leak. Here's link to syzkaller crash report illustrating this issue: https://syzkaller.appspot.com/text?tag=CrashReport&x=1406c201980000 |
| CVE-2024-47676 | In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb.c: fix UAF of vma in hugetlb fault pathway Syzbot reports a UAF in hugetlb_fault(). This happens because vmf_anon_prepare() could drop the per-VMA lock and allow the current VMA to be freed before hugetlb_vma_unlock_read() is called. We can fix this by using a modified version of vmf_anon_prepare() that doesn't release the VMA lock on failure, and then release it ourselves after hugetlb_vma_unlock_read(). |
| CVE-2024-47675 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in bpf_uprobe_multi_link_attach() If bpf_link_prime() fails, bpf_uprobe_multi_link_attach() goes to the error_free label and frees the array of bpf_uprobe's without calling bpf_uprobe_unregister(). This leaks bpf_uprobe->uprobe and worse, this frees bpf_uprobe->consumer without removing it from the uprobe->consumers list. |
| CVE-2024-47674 | In the Linux kernel, the following vulnerability has been resolved: mm: avoid leaving partial pfn mappings around in error case As Jann points out, PFN mappings are special, because unlike normal memory mappings, there is no lifetime information associated with the mapping - it is just a raw mapping of PFNs with no reference counting of a 'struct page'. That's all very much intentional, but it does mean that it's easy to mess up the cleanup in case of errors. Yes, a failed mmap() will always eventually clean up any partial mappings, but without any explicit lifetime in the page table mapping itself, it's very easy to do the error handling in the wrong order. In particular, it's easy to mistakenly free the physical backing store before the page tables are actually cleaned up and (temporarily) have stale dangling PTE entries. To make this situation less error-prone, just make sure that any partial pfn mapping is torn down early, before any other error handling. |
| CVE-2024-47673 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: pause TCM when the firmware is stopped Not doing so will make us send a host command to the transport while the firmware is not alive, which will trigger a WARNING. bad state = 0 WARNING: CPU: 2 PID: 17434 at drivers/net/wireless/intel/iwlwifi/iwl-trans.c:115 iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] RIP: 0010:iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] Call Trace: <TASK> iwl_mvm_send_cmd+0x40/0xc0 [iwlmvm] iwl_mvm_config_scan+0x198/0x260 [iwlmvm] iwl_mvm_recalc_tcm+0x730/0x11d0 [iwlmvm] iwl_mvm_tcm_work+0x1d/0x30 [iwlmvm] process_one_work+0x29e/0x640 worker_thread+0x2df/0x690 ? rescuer_thread+0x540/0x540 kthread+0x192/0x1e0 ? set_kthread_struct+0x90/0x90 ret_from_fork+0x22/0x30 |
| CVE-2024-47672 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was recently converted from just a message), that can be hit if we wait for TX queues to become empty after firmware died. Clearly, we can't expect anything from the firmware after it's declared dead. Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could be a good idea to stop the flow earlier, the flush functions do some maintenance work that is not related to the firmware, so keep that part of the code running even when the firmware is not running. [edit commit message] |
| CVE-2024-47671 | In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: prevent kernel-usb-infoleak The syzbot reported a kernel-usb-infoleak in usbtmc_write, we need to clear the structure before filling fields. |
| CVE-2024-47670 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: add bounds checking to ocfs2_xattr_find_entry() Add a paranoia check to make sure it doesn't stray beyond valid memory region containing ocfs2 xattr entries when scanning for a match. It will prevent out-of-bound access in case of crafted images. |
| CVE-2024-47669 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix state management in error path of log writing function After commit a694291a6211 ("nilfs2: separate wait function from nilfs_segctor_write") was applied, the log writing function nilfs_segctor_do_construct() was able to issue I/O requests continuously even if user data blocks were split into multiple logs across segments, but two potential flaws were introduced in its error handling. First, if nilfs_segctor_begin_construction() fails while creating the second or subsequent logs, the log writing function returns without calling nilfs_segctor_abort_construction(), so the writeback flag set on pages/folios will remain uncleared. This causes page cache operations to hang waiting for the writeback flag. For example, truncate_inode_pages_final(), which is called via nilfs_evict_inode() when an inode is evicted from memory, will hang. Second, the NILFS_I_COLLECTED flag set on normal inodes remain uncleared. As a result, if the next log write involves checkpoint creation, that's fine, but if a partial log write is performed that does not, inodes with NILFS_I_COLLECTED set are erroneously removed from the "sc_dirty_files" list, and their data and b-tree blocks may not be written to the device, corrupting the block mapping. Fix these issues by uniformly calling nilfs_segctor_abort_construction() on failure of each step in the loop in nilfs_segctor_do_construct(), having it clean up logs and segment usages according to progress, and correcting the conditions for calling nilfs_redirty_inodes() to ensure that the NILFS_I_COLLECTED flag is cleared. |
| CVE-2024-47668 | In the Linux kernel, the following vulnerability has been resolved: lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc() If we need to increase the tree depth, allocate a new node, and then race with another thread that increased the tree depth before us, we'll still have a preallocated node that might be used later. If we then use that node for a new non-root node, it'll still have a pointer to the old root instead of being zeroed - fix this by zeroing it in the cmpxchg failure path. |
| CVE-2024-47667 | In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0) Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0 (SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an inbound PCIe TLP spans more than two internal AXI 128-byte bursts, the bus may corrupt the packet payload and the corrupt data may cause associated applications or the processor to hang. The workaround for Errata #i2037 is to limit the maximum read request size and maximum payload size to 128 bytes. Add workaround for Errata #i2037 here. The errata and workaround is applicable only to AM65x SR 1.0 and later versions of the silicon will have this fixed. [1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf |
| CVE-2024-47666 | In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Set phy->enable_completion only when we wait for it pm8001_phy_control() populates the enable_completion pointer with a stack address, sends a PHY_LINK_RESET / PHY_HARD_RESET, waits 300 ms, and returns. The problem arises when a phy control response comes late. After 300 ms the pm8001_phy_control() function returns and the passed enable_completion stack address is no longer valid. Late phy control response invokes complete() on a dangling enable_completion pointer which leads to a kernel crash. |
| CVE-2024-47665 | In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup Definitely condition dma_get_cache_alignment * defined value > 256 during driver initialization is not reason to BUG_ON(). Turn that to graceful error out with -EINVAL. |
| CVE-2024-47664 | In the Linux kernel, the following vulnerability has been resolved: spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware If the value of max_speed_hz is 0, it may cause a division by zero error in hisi_calc_effective_speed(). The value of max_speed_hz is provided by firmware. Firmware is generally considered as a trusted domain. However, as division by zero errors can cause system failure, for defense measure, the value of max_speed is validated here. So 0 is regarded as invalid and an error code is returned. |
| CVE-2024-47663 | In the Linux kernel, the following vulnerability has been resolved: staging: iio: frequency: ad9834: Validate frequency parameter value In ad9834_write_frequency() clk_get_rate() can return 0. In such case ad9834_calc_freqreg() call will lead to division by zero. Checking 'if (fout > (clk_freq / 2))' doesn't protect in case of 'fout' is 0. ad9834_write_frequency() is called from ad9834_write(), where fout is taken from text buffer, which can contain any value. Modify parameters checking. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-47662 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Remove register from DCN35 DMCUB diagnostic collection [Why] These registers should not be read from driver and triggering the security violation when DMCUB work times out and diagnostics are collected blocks Z8 entry. [How] Remove the register read from DCN35. |
| CVE-2024-47661 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid overflow from uint32_t to uint8_t [WHAT & HOW] dmub_rb_cmd's ramping_boundary has size of uint8_t and it is assigned 0xFFFF. Fix it by changing it to uint8_t with value of 0xFF. This fixes 2 INTEGER_OVERFLOW issues reported by Coverity. |
| CVE-2024-47660 | In the Linux kernel, the following vulnerability has been resolved: fsnotify: clear PARENT_WATCHED flags lazily In some setups directories can have many (usually negative) dentries. Hence __fsnotify_update_child_dentry_flags() function can take a significant amount of time. Since the bulk of this function happens under inode->i_lock this causes a significant contention on the lock when we remove the watch from the directory as the __fsnotify_update_child_dentry_flags() call from fsnotify_recalc_mask() races with __fsnotify_update_child_dentry_flags() calls from __fsnotify_parent() happening on children. This can lead upto softlockup reports reported by users. Fix the problem by calling fsnotify_update_children_dentry_flags() to set PARENT_WATCHED flags only when parent starts watching children. When parent stops watching children, clear false positive PARENT_WATCHED flags lazily in __fsnotify_parent() for each accessed child. |
| CVE-2024-47659 | In the Linux kernel, the following vulnerability has been resolved: smack: tcp: ipv4, fix incorrect labeling Currently, Smack mirrors the label of incoming tcp/ipv4 connections: when a label 'foo' connects to a label 'bar' with tcp/ipv4, 'foo' always gets 'foo' in returned ipv4 packets. So, 1) returned packets are incorrectly labeled ('foo' instead of 'bar') 2) 'bar' can write to 'foo' without being authorized to write. Here is a scenario how to see this: * Take two machines, let's call them C and S, with active Smack in the default state (no settings, no rules, no labeled hosts, only builtin labels) * At S, add Smack rule 'foo bar w' (labels 'foo' and 'bar' are instantiated at S at this moment) * At S, at label 'bar', launch a program that listens for incoming tcp/ipv4 connections * From C, at label 'foo', connect to the listener at S. (label 'foo' is instantiated at C at this moment) Connection succeedes and works. * Send some data in both directions. * Collect network traffic of this connection. All packets in both directions are labeled with the CIPSO of the label 'foo'. Hence, label 'bar' writes to 'foo' without being authorized, and even without ever being known at C. If anybody cares: exactly the same happens with DCCP. This behavior 1st manifested in release 2.6.29.4 (see Fixes below) and it looks unintentional. At least, no explanation was provided. I changed returned packes label into the 'bar', to bring it into line with the Smack documentation claims. |
| CVE-2024-47658 | In the Linux kernel, the following vulnerability has been resolved: crypto: stm32/cryp - call finalize with bh disabled The finalize operation in interrupt mode produce a produces a spinlock recursion warning. The reason is the fact that BH must be disabled during this process. |
| CVE-2024-46871 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Correct the defined value for AMDGPU_DMUB_NOTIFICATION_MAX [Why & How] It actually exposes '6' types in enum dmub_notification_type. Not 5. Using smaller number to create array dmub_callback & dmub_thread_offload has potential to access item out of array bound. Fix it. |
| CVE-2024-46870 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Disable DMCUB timeout for DCN35 [Why] DMCUB can intermittently take longer than expected to process commands. Old ASIC policy was to continue while logging a diagnostic error - which works fine for ASIC without IPS, but with IPS this could lead to a race condition where we attempt to access DCN state while it's inaccessible, leading to a system hang when the NIU port is not disabled or register accesses that timeout and the display configuration in an undefined state. [How] We need to investigate why these accesses take longer than expected, but for now we should disable the timeout on DCN35 to avoid this race condition. Since the waits happen only at lower interrupt levels the risk of taking too long at higher IRQ and causing a system watchdog timeout are minimal. |
| CVE-2024-46869 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: Allocate memory for driver private data Fix driver not allocating memory for struct btintel_data which is used to store internal data. |
| CVE-2024-46868 | In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire() If the __qcuefi pointer is not set, then in the original code, we would hold onto the lock. That means that if we tried to set it later, then it would cause a deadlock. Drop the lock on the error path. That's what all the callers are expecting. |
| CVE-2024-46867 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/client: fix deadlock in show_meminfo() There is a real deadlock as well as sleeping in atomic() bug in here, if the bo put happens to be the last ref, since bo destruction wants to grab the same spinlock and sleeping locks. Fix that by dropping the ref using xe_bo_put_deferred(), and moving the final commit outside of the lock. Dropping the lock around the put is tricky since the bo can go out of scope and delete itself from the list, making it difficult to navigate to the next list entry. (cherry picked from commit 0083b8e6f11d7662283a267d4ce7c966812ffd8a) |
| CVE-2024-46866 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/client: add missing bo locking in show_meminfo() bo_meminfo() wants to inspect bo state like tt and the ttm resource, however this state can change at any point leading to stuff like NPD and UAF, if the bo lock is not held. Grab the bo lock when calling bo_meminfo(), ensuring we drop any spinlocks first. In the case of object_idr we now also need to hold a ref. v2 (MattB) - Also add xe_bo_assert_held() (cherry picked from commit 4f63d712fa104c3ebefcb289d1e733e86d8698c7) |
| CVE-2024-46865 | In the Linux kernel, the following vulnerability has been resolved: fou: fix initialization of grc The grc must be initialize first. There can be a condition where if fou is NULL, goto out will be executed and grc would be used uninitialized. |
| CVE-2024-46864 | In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: fix kexec crash due to VP assist page corruption commit 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline") introduces a new cpuhp state for hyperv initialization. cpuhp_setup_state() returns the state number if state is CPUHP_AP_ONLINE_DYN or CPUHP_BP_PREPARE_DYN and 0 for all other states. For the hyperv case, since a new cpuhp state was introduced it would return 0. However, in hv_machine_shutdown(), the cpuhp_remove_state() call is conditioned upon "hyperv_init_cpuhp > 0". This will never be true and so hv_cpu_die() won't be called on all CPUs. This means the VP assist page won't be reset. When the kexec kernel tries to setup the VP assist page again, the hypervisor corrupts the memory region of the old VP assist page causing a panic in case the kexec kernel is using that memory elsewhere. This was originally fixed in commit dfe94d4086e4 ("x86/hyperv: Fix kexec panic/hang issues"). Get rid of hyperv_init_cpuhp entirely since we are no longer using a dynamic cpuhp state and use CPUHP_AP_HYPERV_ONLINE directly with cpuhp_remove_state(). |
| CVE-2024-46863 | In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: soc-acpi-intel-lnl-match: add missing empty item There is no links_num in struct snd_soc_acpi_mach {}, and we test !link->num_adr as a condition to end the loop in hda_sdw_machine_select(). So an empty item in struct snd_soc_acpi_link_adr array is required. |
| CVE-2024-46862 | In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: soc-acpi-intel-mtl-match: add missing empty item There is no links_num in struct snd_soc_acpi_mach {}, and we test !link->num_adr as a condition to end the loop in hda_sdw_machine_select(). So an empty item in struct snd_soc_acpi_link_adr array is required. |
| CVE-2024-46861 | In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: do not stop RX on failing RX callback RX callbacks can fail for multiple reasons: * Payload too short * Payload formatted incorrecly (e.g. bad NCM framing) * Lack of memory None of these should cause the driver to seize up. Make such failures non-critical and continue processing further incoming URBs. |
| CVE-2024-46860 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change When disabling wifi mt7921_ipv6_addr_change() is called as a notifier. At this point mvif->phy is already NULL so we cannot use it here. |
| CVE-2024-46859 | In the Linux kernel, the following vulnerability has been resolved: platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses The panasonic laptop code in various places uses the SINF array with index values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array is big enough. Not all panasonic laptops have this many SINF array entries, for example the Toughbook CF-18 model only has 10 SINF array entries. So it only supports the AC+DC brightness entries and mute. Check that the SINF array has a minimum size which covers all AC+DC brightness entries and refuse to load if the SINF array is smaller. For higher SINF indexes hide the sysfs attributes when the SINF array does not contain an entry for that attribute, avoiding show()/store() accessing the array out of bounds and add bounds checking to the probe() and resume() code accessing these. |
| CVE-2024-46858 | In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: Fix uaf in __timer_delete_sync There are two paths to access mptcp_pm_del_add_timer, result in a race condition: CPU1 CPU2 ==== ==== net_rx_action napi_poll netlink_sendmsg __napi_poll netlink_unicast process_backlog netlink_unicast_kernel __netif_receive_skb genl_rcv __netif_receive_skb_one_core netlink_rcv_skb NF_HOOK genl_rcv_msg ip_local_deliver_finish genl_family_rcv_msg ip_protocol_deliver_rcu genl_family_rcv_msg_doit tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit tcp_v4_do_rcv mptcp_nl_remove_addrs_list tcp_rcv_established mptcp_pm_remove_addrs_and_subflows tcp_data_queue remove_anno_list_by_saddr mptcp_incoming_options mptcp_pm_del_add_timer mptcp_pm_del_add_timer kfree(entry) In remove_anno_list_by_saddr(running on CPU2), after leaving the critical zone protected by "pm.lock", the entry will be released, which leads to the occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1). Keeping a reference to add_timer inside the lock, and calling sk_stop_timer_sync() with this reference, instead of "entry->add_timer". Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock, do not directly access any members of the entry outside the pm lock, which can avoid similar "entry->x" uaf. |
| CVE-2024-46857 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix bridge mode operations when there are no VFs Currently, trying to set the bridge mode attribute when numvfs=0 leads to a crash: bridge link set dev eth2 hwmode vepa [ 168.967392] BUG: kernel NULL pointer dereference, address: 0000000000000030 [...] [ 168.969989] RIP: 0010:mlx5_add_flow_rules+0x1f/0x300 [mlx5_core] [...] [ 168.976037] Call Trace: [ 168.976188] <TASK> [ 168.978620] _mlx5_eswitch_set_vepa_locked+0x113/0x230 [mlx5_core] [ 168.979074] mlx5_eswitch_set_vepa+0x7f/0xa0 [mlx5_core] [ 168.979471] rtnl_bridge_setlink+0xe9/0x1f0 [ 168.979714] rtnetlink_rcv_msg+0x159/0x400 [ 168.980451] netlink_rcv_skb+0x54/0x100 [ 168.980675] netlink_unicast+0x241/0x360 [ 168.980918] netlink_sendmsg+0x1f6/0x430 [ 168.981162] ____sys_sendmsg+0x3bb/0x3f0 [ 168.982155] ___sys_sendmsg+0x88/0xd0 [ 168.985036] __sys_sendmsg+0x59/0xa0 [ 168.985477] do_syscall_64+0x79/0x150 [ 168.987273] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 168.987773] RIP: 0033:0x7f8f7950f917 (esw->fdb_table.legacy.vepa_fdb is null) The bridge mode is only relevant when there are multiple functions per port. Therefore, prevent setting and getting this setting when there are no VFs. Note that after this change, there are no settings to change on the PF interface using `bridge link` when there are no VFs, so the interface no longer appears in the `bridge link` output. |
| CVE-2024-46856 | In the Linux kernel, the following vulnerability has been resolved: net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices The probe() function is only used for DP83822 and DP83826 PHY, leaving the private data pointer uninitialized for the DP83825 models which causes a NULL pointer dereference in the recently introduced/changed functions dp8382x_config_init() and dp83822_set_wol(). Add the dp8382x_probe() function, so all PHY models will have a valid private data pointer to fix this issue and also prevent similar issues in the future. |
| CVE-2024-46855 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_socket: fix sk refcount leaks We must put 'sk' reference before returning. |
| CVE-2024-46854 | In the Linux kernel, the following vulnerability has been resolved: net: dpaa: Pad packets to ETH_ZLEN When sending packets under 60 bytes, up to three bytes of the buffer following the data may be leaked. Avoid this by extending all packets to ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be reproduced by running $ ping -s 11 destination |
| CVE-2024-46853 | In the Linux kernel, the following vulnerability has been resolved: spi: nxp-fspi: fix the KASAN report out-of-bounds bug Change the memcpy length to fix the out-of-bounds issue when writing the data that is not 4 byte aligned to TX FIFO. To reproduce the issue, write 3 bytes data to NOR chip. dd if=3b of=/dev/mtd0 [ 36.926103] ================================================================== [ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838 [ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455 [ 36.946721] [ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070 [ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT) [ 36.961260] Call trace: [ 36.963723] dump_backtrace+0x90/0xe8 [ 36.967414] show_stack+0x18/0x24 [ 36.970749] dump_stack_lvl+0x78/0x90 [ 36.974451] print_report+0x114/0x5cc [ 36.978151] kasan_report+0xa4/0xf0 [ 36.981670] __asan_report_load_n_noabort+0x1c/0x28 [ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838 [ 36.990800] spi_mem_exec_op+0x8ec/0xd30 [ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0 [ 36.999323] spi_mem_dirmap_write+0x238/0x32c [ 37.003710] spi_nor_write_data+0x220/0x374 [ 37.007932] spi_nor_write+0x110/0x2e8 [ 37.011711] mtd_write_oob_std+0x154/0x1f0 [ 37.015838] mtd_write_oob+0x104/0x1d0 [ 37.019617] mtd_write+0xb8/0x12c [ 37.022953] mtdchar_write+0x224/0x47c [ 37.026732] vfs_write+0x1e4/0x8c8 [ 37.030163] ksys_write+0xec/0x1d0 [ 37.033586] __arm64_sys_write+0x6c/0x9c [ 37.037539] invoke_syscall+0x6c/0x258 [ 37.041327] el0_svc_common.constprop.0+0x160/0x22c [ 37.046244] do_el0_svc+0x44/0x5c [ 37.049589] el0_svc+0x38/0x78 [ 37.052681] el0t_64_sync_handler+0x13c/0x158 [ 37.057077] el0t_64_sync+0x190/0x194 [ 37.060775] [ 37.062274] Allocated by task 455: [ 37.065701] kasan_save_stack+0x2c/0x54 [ 37.069570] kasan_save_track+0x20/0x3c [ 37.073438] kasan_save_alloc_info+0x40/0x54 [ 37.077736] __kasan_kmalloc+0xa0/0xb8 [ 37.081515] __kmalloc_noprof+0x158/0x2f8 [ 37.085563] mtd_kmalloc_up_to+0x120/0x154 [ 37.089690] mtdchar_write+0x130/0x47c [ 37.093469] vfs_write+0x1e4/0x8c8 [ 37.096901] ksys_write+0xec/0x1d0 [ 37.100332] __arm64_sys_write+0x6c/0x9c [ 37.104287] invoke_syscall+0x6c/0x258 [ 37.108064] el0_svc_common.constprop.0+0x160/0x22c [ 37.112972] do_el0_svc+0x44/0x5c [ 37.116319] el0_svc+0x38/0x78 [ 37.119401] el0t_64_sync_handler+0x13c/0x158 [ 37.123788] el0t_64_sync+0x190/0x194 [ 37.127474] [ 37.128977] The buggy address belongs to the object at ffff00081037c2a0 [ 37.128977] which belongs to the cache kmalloc-8 of size 8 [ 37.141177] The buggy address is located 0 bytes inside of [ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3) [ 37.153465] [ 37.154971] The buggy address belongs to the physical page: [ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c [ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff) [ 37.175149] page_type: 0xfdffffff(slab) [ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000 [ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000 [ 37.194553] page dumped because: kasan: bad access detected [ 37.200144] [ 37.201647] Memory state around the buggy address: [ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc [ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc [ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc [ 37.228186] ^ [ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.246962] ============================================================== ---truncated--- |
| CVE-2024-46852 | In the Linux kernel, the following vulnerability has been resolved: dma-buf: heaps: Fix off-by-one in CMA heap fault handler Until VM_DONTEXPAND was added in commit 1c1914d6e8c6 ("dma-buf: heaps: Don't track CMA dma-buf pages under RssFile") it was possible to obtain a mapping larger than the buffer size via mremap and bypass the overflow check in dma_buf_mmap_internal. When using such a mapping to attempt to fault past the end of the buffer, the CMA heap fault handler also checks the fault offset against the buffer size, but gets the boundary wrong by 1. Fix the boundary check so that we don't read off the end of the pages array and insert an arbitrary page in the mapping. |
| CVE-2024-46851 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct() dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn10_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn10_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn10_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. (cherry picked from commit a3cc326a43bdc48fbdf53443e1027a03e309b643) |
| CVE-2024-46850 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid race between dcn35_set_drr() and dc_state_destruct() dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn35_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn35_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn35_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. (cherry picked from commit 0607a50c004798a96e62c089a4c34c220179dcb5) |
| CVE-2024-46849 | In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: axg-card: fix 'use-after-free' Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()', so move 'pad' pointer initialization after this function when memory is already reallocated. Kasan bug report: ================================================================== BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc Read of size 8 at addr ffff000000e8b260 by task modprobe/356 CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1 Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x78/0x90 print_report+0xfc/0x5c0 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card] meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils] platform_probe+0x8c/0xf4 really_probe+0x110/0x39c __driver_probe_device+0xb8/0x18c driver_probe_device+0x108/0x1d8 __driver_attach+0xd0/0x25c bus_for_each_dev+0xe0/0x154 driver_attach+0x34/0x44 bus_add_driver+0x134/0x294 driver_register+0xa8/0x1e8 __platform_driver_register+0x44/0x54 axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card] do_one_initcall+0xdc/0x25c do_init_module+0x10c/0x334 load_module+0x24c4/0x26cc init_module_from_file+0xd4/0x128 __arm64_sys_finit_module+0x1f4/0x41c invoke_syscall+0x60/0x188 el0_svc_common.constprop.0+0x78/0x13c do_el0_svc+0x30/0x40 el0_svc+0x38/0x78 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 |
| CVE-2024-46848 | In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Limit the period on Haswell Running the ltp test cve-2015-3290 concurrently reports the following warnings. perfevents: irq loop stuck! WARNING: CPU: 31 PID: 32438 at arch/x86/events/intel/core.c:3174 intel_pmu_handle_irq+0x285/0x370 Call Trace: <NMI> ? __warn+0xa4/0x220 ? intel_pmu_handle_irq+0x285/0x370 ? __report_bug+0x123/0x130 ? intel_pmu_handle_irq+0x285/0x370 ? __report_bug+0x123/0x130 ? intel_pmu_handle_irq+0x285/0x370 ? report_bug+0x3e/0xa0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? irq_work_claim+0x1e/0x40 ? intel_pmu_handle_irq+0x285/0x370 perf_event_nmi_handler+0x3d/0x60 nmi_handle+0x104/0x330 Thanks to Thomas Gleixner's analysis, the issue is caused by the low initial period (1) of the frequency estimation algorithm, which triggers the defects of the HW, specifically erratum HSW11 and HSW143. (For the details, please refer https://lore.kernel.org/lkml/87plq9l5d2.ffs@tglx/) The HSW11 requires a period larger than 100 for the INST_RETIRED.ALL event, but the initial period in the freq mode is 1. The erratum is the same as the BDM11, which has been supported in the kernel. A minimum period of 128 is enforced as well on HSW. HSW143 is regarding that the fixed counter 1 may overcount 32 with the Hyper-Threading is enabled. However, based on the test, the hardware has more issues than it tells. Besides the fixed counter 1, the message 'interrupt took too long' can be observed on any counter which was armed with a period < 32 and two events expired in the same NMI. A minimum period of 32 is enforced for the rest of the events. The recommended workaround code of the HSW143 is not implemented. Because it only addresses the issue for the fixed counter. It brings extra overhead through extra MSR writing. No related overcounting issue has been reported so far. |
| CVE-2024-46847 | In the Linux kernel, the following vulnerability has been resolved: mm: vmalloc: ensure vmap_block is initialised before adding to queue Commit 8c61291fd850 ("mm: fix incorrect vbq reference in purge_fragmented_block") extended the 'vmap_block' structure to contain a 'cpu' field which is set at allocation time to the id of the initialising CPU. When a new 'vmap_block' is being instantiated by new_vmap_block(), the partially initialised structure is added to the local 'vmap_block_queue' xarray before the 'cpu' field has been initialised. If another CPU is concurrently walking the xarray (e.g. via vm_unmap_aliases()), then it may perform an out-of-bounds access to the remote queue thanks to an uninitialised index. This has been observed as UBSAN errors in Android: | Internal error: UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP | | Call trace: | purge_fragmented_block+0x204/0x21c | _vm_unmap_aliases+0x170/0x378 | vm_unmap_aliases+0x1c/0x28 | change_memory_common+0x1dc/0x26c | set_memory_ro+0x18/0x24 | module_enable_ro+0x98/0x238 | do_init_module+0x1b0/0x310 Move the initialisation of 'vb->cpu' in new_vmap_block() ahead of the addition to the xarray. |
| CVE-2024-46846 | In the Linux kernel, the following vulnerability has been resolved: spi: rockchip: Resolve unbalanced runtime PM / system PM handling Commit e882575efc77 ("spi: rockchip: Suspend and resume the bus during NOIRQ_SYSTEM_SLEEP_PM ops") stopped respecting runtime PM status and simply disabled clocks unconditionally when suspending the system. This causes problems when the device is already runtime suspended when we go to sleep -- in which case we double-disable clocks and produce a WARNing. Switch back to pm_runtime_force_{suspend,resume}(), because that still seems like the right thing to do, and the aforementioned commit makes no explanation why it stopped using it. Also, refactor some of the resume() error handling, because it's not actually a good idea to re-disable clocks on failure. |
| CVE-2024-46845 | In the Linux kernel, the following vulnerability has been resolved: tracing/timerlat: Only clear timer if a kthread exists The timerlat tracer can use user space threads to check for osnoise and timer latency. If the program using this is killed via a SIGTERM, the threads are shutdown one at a time and another tracing instance can start up resetting the threads before they are fully closed. That causes the hrtimer assigned to the kthread to be shutdown and freed twice when the dying thread finally closes the file descriptors, causing a use-after-free bug. Only cancel the hrtimer if the associated thread is still around. Also add the interface_lock around the resetting of the tlat_var->kthread. Note, this is just a quick fix that can be backported to stable. A real fix is to have a better synchronization between the shutdown of old threads and the starting of new ones. |
| CVE-2024-46844 | In the Linux kernel, the following vulnerability has been resolved: um: line: always fill *error_out in setup_one_line() The pointer isn't initialized by callers, but I have encountered cases where it's still printed; initialize it in all possible cases in setup_one_line(). |
| CVE-2024-46843 | In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Remove SCSI host only if added If host tries to remove ufshcd driver from a UFS device it would cause a kernel panic if ufshcd_async_scan fails during ufshcd_probe_hba before adding a SCSI host with scsi_add_host and MCQ is enabled since SCSI host has been defered after MCQ configuration introduced by commit 0cab4023ec7b ("scsi: ufs: core: Defer adding host to SCSI if MCQ is supported"). To guarantee that SCSI host is removed only if it has been added, set the scsi_host_added flag to true after adding a SCSI host and check whether it is set or not before removing it. |
| CVE-2024-46842 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Handle mailbox timeouts in lpfc_get_sfp_info The MBX_TIMEOUT return code is not handled in lpfc_get_sfp_info and the routine unconditionally frees submitted mailbox commands regardless of return status. The issue is that for MBX_TIMEOUT cases, when firmware returns SFP information at a later time, that same mailbox memory region references previously freed memory in its cmpl routine. Fix by adding checks for the MBX_TIMEOUT return code. During mailbox resource cleanup, check the mbox flag to make sure that the wait did not timeout. If the MBOX_WAKE flag is not set, then do not free the resources because it will be freed when firmware completes the mailbox at a later time in its cmpl routine. Also, increase the timeout from 30 to 60 seconds to accommodate boot scripts requiring longer timeouts. |
| CVE-2024-46841 | In the Linux kernel, the following vulnerability has been resolved: btrfs: don't BUG_ON on ENOMEM from btrfs_lookup_extent_info() in walk_down_proc() We handle errors here properly, ENOMEM isn't fatal, return the error. |
| CVE-2024-46840 | In the Linux kernel, the following vulnerability has been resolved: btrfs: clean up our handling of refs == 0 in snapshot delete In reada we BUG_ON(refs == 0), which could be unkind since we aren't holding a lock on the extent leaf and thus could get a transient incorrect answer. In walk_down_proc we also BUG_ON(refs == 0), which could happen if we have extent tree corruption. Change that to return -EUCLEAN. In do_walk_down() we catch this case and handle it correctly, however we return -EIO, which -EUCLEAN is a more appropriate error code. Finally in walk_up_proc we have the same BUG_ON(refs == 0), so convert that to proper error handling. Also adjust the error message so we can actually do something with the information. |
| CVE-2024-46838 | In the Linux kernel, the following vulnerability has been resolved: userfaultfd: don't BUG_ON() if khugepaged yanks our page table Since khugepaged was changed to allow retracting page tables in file mappings without holding the mmap lock, these BUG_ON()s are wrong - get rid of them. We could also remove the preceding "if (unlikely(...))" block, but then we could reach pte_offset_map_lock() with transhuge pages not just for file mappings but also for anonymous mappings - which would probably be fine but I think is not necessarily expected. |
| CVE-2024-46837 | In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Restrict high priorities on group_create We were allowing any users to create a high priority group without any permission checks. As a result, this was allowing possible denial of service. We now only allow the DRM master or users with the CAP_SYS_NICE capability to set higher priorities than PANTHOR_GROUP_PRIORITY_MEDIUM. As the sole user of that uAPI lives in Mesa and hardcode a value of MEDIUM [1], this should be safe to do. Additionally, as those checks are performed at the ioctl level, panthor_group_create now only check for priority level validity. [1]https://gitlab.freedesktop.org/mesa/mesa/-/blob/f390835074bdf162a63deb0311d1a6de527f9f89/src/gallium/drivers/panfrost/pan_csf.c#L1038 |
| CVE-2024-46836 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: aspeed_udc: validate endpoint index for ast udc We should verify the bound of the array to assure that host may not manipulate the index to point past endpoint array. Found by static analysis. |
| CVE-2024-46835 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix smatch static checker warning adev->gfx.imu.funcs could be NULL |
| CVE-2024-46834 | In the Linux kernel, the following vulnerability has been resolved: ethtool: fail closed if we can't get max channel used in indirection tables Commit 0d1b7d6c9274 ("bnxt: fix crashes when reducing ring count with active RSS contexts") proves that allowing indirection table to contain channels with out of bounds IDs may lead to crashes. Currently the max channel check in the core gets skipped if driver can't fetch the indirection table or when we can't allocate memory. Both of those conditions should be extremely rare but if they do happen we should try to be safe and fail the channel change. |
| CVE-2024-46833 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: void array out of bound when loop tnl_num When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes from hardware and the length of array is a fixed value. To void array out of bound, make sure the loop time is not greater than the length of array |
| CVE-2024-46832 | In the Linux kernel, the following vulnerability has been resolved: MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed This avoids warning: [ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 Caused by get_c0_compare_int on secondary CPU. We also skipped saving IRQ number to struct clock_event_device *cd as it's never used by clockevent core, as per comments it's only meant for "non CPU local devices". |
| CVE-2024-46831 | In the Linux kernel, the following vulnerability has been resolved: net: microchip: vcap: Fix use-after-free error in kunit test This is a clear use-after-free error. We remove it, and rely on checking the return code of vcap_del_rule. |
| CVE-2024-46830 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Acquire kvm->srcu when handling KVM_SET_VCPU_EVENTS Grab kvm->srcu when processing KVM_SET_VCPU_EVENTS, as KVM will forcibly leave nested VMX/SVM if SMM mode is being toggled, and leaving nested VMX reads guest memory. Note, kvm_vcpu_ioctl_x86_set_vcpu_events() can also be called from KVM_RUN via sync_regs(), which already holds SRCU. I.e. trying to precisely use kvm_vcpu_srcu_read_lock() around the problematic SMM code would cause problems. Acquiring SRCU isn't all that expensive, so for simplicity, grab it unconditionally for KVM_SET_VCPU_EVENTS. ============================= WARNING: suspicious RCU usage 6.10.0-rc7-332d2c1d713e-next-vm #552 Not tainted ----------------------------- include/linux/kvm_host.h:1027 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by repro/1071: #0: ffff88811e424430 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x7d/0x970 [kvm] stack backtrace: CPU: 15 PID: 1071 Comm: repro Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #552 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x7f/0x90 lockdep_rcu_suspicious+0x13f/0x1a0 kvm_vcpu_gfn_to_memslot+0x168/0x190 [kvm] kvm_vcpu_read_guest+0x3e/0x90 [kvm] nested_vmx_load_msr+0x6b/0x1d0 [kvm_intel] load_vmcs12_host_state+0x432/0xb40 [kvm_intel] vmx_leave_nested+0x30/0x40 [kvm_intel] kvm_vcpu_ioctl_x86_set_vcpu_events+0x15d/0x2b0 [kvm] kvm_arch_vcpu_ioctl+0x1107/0x1750 [kvm] ? mark_held_locks+0x49/0x70 ? kvm_vcpu_ioctl+0x7d/0x970 [kvm] ? kvm_vcpu_ioctl+0x497/0x970 [kvm] kvm_vcpu_ioctl+0x497/0x970 [kvm] ? lock_acquire+0xba/0x2d0 ? find_held_lock+0x2b/0x80 ? do_user_addr_fault+0x40c/0x6f0 ? lock_release+0xb7/0x270 __x64_sys_ioctl+0x82/0xb0 do_syscall_64+0x6c/0x170 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7ff11eb1b539 </TASK> |
| CVE-2024-46829 | In the Linux kernel, the following vulnerability has been resolved: rtmutex: Drop rt_mutex::wait_lock before scheduling rt_mutex_handle_deadlock() is called with rt_mutex::wait_lock held. In the good case it returns with the lock held and in the deadlock case it emits a warning and goes into an endless scheduling loop with the lock held, which triggers the 'scheduling in atomic' warning. Unlock rt_mutex::wait_lock in the dead lock case before issuing the warning and dropping into the schedule for ever loop. [ tglx: Moved unlock before the WARN(), removed the pointless comment, massaged changelog, added Fixes tag ] |
| CVE-2024-46828 | In the Linux kernel, the following vulnerability has been resolved: sched: sch_cake: fix bulk flow accounting logic for host fairness In sch_cake, we keep track of the count of active bulk flows per host, when running in dst/src host fairness mode, which is used as the round-robin weight when iterating through flows. The count of active bulk flows is updated whenever a flow changes state. This has a peculiar interaction with the hash collision handling: when a hash collision occurs (after the set-associative hashing), the state of the hash bucket is simply updated to match the new packet that collided, and if host fairness is enabled, that also means assigning new per-host state to the flow. For this reason, the bulk flow counters of the host(s) assigned to the flow are decremented, before new state is assigned (and the counters, which may not belong to the same host anymore, are incremented again). Back when this code was introduced, the host fairness mode was always enabled, so the decrement was unconditional. When the configuration flags were introduced the *increment* was made conditional, but the *decrement* was not. Which of course can lead to a spurious decrement (and associated wrap-around to U16_MAX). AFAICT, when host fairness is disabled, the decrement and wrap-around happens as soon as a hash collision occurs (which is not that common in itself, due to the set-associative hashing). However, in most cases this is harmless, as the value is only used when host fairness mode is enabled. So in order to trigger an array overflow, sch_cake has to first be configured with host fairness disabled, and while running in this mode, a hash collision has to occur to cause the overflow. Then, the qdisc has to be reconfigured to enable host fairness, which leads to the array out-of-bounds because the wrapped-around value is retained and used as an array index. It seems that syzbot managed to trigger this, which is quite impressive in its own right. This patch fixes the issue by introducing the same conditional check on decrement as is used on increment. The original bug predates the upstreaming of cake, but the commit listed in the Fixes tag touched that code, meaning that this patch won't apply before that. |
| CVE-2024-46827 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix firmware crash due to invalid peer nss Currently, if the access point receives an association request containing an Extended HE Capabilities Information Element with an invalid MCS-NSS, it triggers a firmware crash. This issue arises when EHT-PHY capabilities shows support for a bandwidth and MCS-NSS set for that particular bandwidth is filled by zeros and due to this, driver obtains peer_nss as 0 and sending this value to firmware causes crash. Address this issue by implementing a validation step for the peer_nss value before passing it to the firmware. If the value is greater than zero, proceed with forwarding it to the firmware. However, if the value is invalid, reject the association request to prevent potential firmware crashes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 |
| CVE-2024-46826 | In the Linux kernel, the following vulnerability has been resolved: ELF: fix kernel.randomize_va_space double read ELF loader uses "randomize_va_space" twice. It is sysctl and can change at any moment, so 2 loads could see 2 different values in theory with unpredictable consequences. Issue exactly one load for consistent value across one exec. |
| CVE-2024-46825 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check The lookup function iwl_mvm_rcu_fw_link_id_to_link_conf() is normally called with input from the firmware, so it should use IWL_FW_CHECK() instead of WARN_ON(). |
| CVE-2024-46824 | In the Linux kernel, the following vulnerability has been resolved: iommufd: Require drivers to supply the cache_invalidate_user ops If drivers don't do this then iommufd will oops invalidation ioctls with something like: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000004 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101059000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 371 Comm: qemu-system-aar Not tainted 6.8.0-rc7-gde77230ac23a #9 Hardware name: linux,dummy-virt (DT) pstate: 81400809 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=-c) pc : 0x0 lr : iommufd_hwpt_invalidate+0xa4/0x204 sp : ffff800080f3bcc0 x29: ffff800080f3bcf0 x28: ffff0000c369b300 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: 0000000000000000 x22: 00000000c1e334a0 x21: ffff0000c1e334a0 x20: ffff800080f3bd38 x19: ffff800080f3bd58 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8240d6d8 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000001000000002 x7 : 0000fffeac1ec950 x6 : 0000000000000000 x5 : ffff800080f3bd78 x4 : 0000000000000003 x3 : 0000000000000002 x2 : 0000000000000000 x1 : ffff800080f3bcc8 x0 : ffff0000c6034d80 Call trace: 0x0 iommufd_fops_ioctl+0x154/0x274 __arm64_sys_ioctl+0xac/0xf0 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xb4 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 All existing drivers implement this op for nesting, this is mostly a bisection aid. |
| CVE-2024-46823 | In the Linux kernel, the following vulnerability has been resolved: kunit/overflow: Fix UB in overflow_allocation_test The 'device_name' array doesn't exist out of the 'overflow_allocation_test' function scope. However, it is being used as a driver name when calling 'kunit_driver_create' from 'kunit_device_register'. It produces the kernel panic with KASAN enabled. Since this variable is used in one place only, remove it and pass the device name into kunit_device_register directly as an ascii string. |
| CVE-2024-46822 | In the Linux kernel, the following vulnerability has been resolved: arm64: acpi: Harden get_cpu_for_acpi_id() against missing CPU entry In a review discussion of the changes to support vCPU hotplug where a check was added on the GICC being enabled if was online, it was noted that there is need to map back to the cpu and use that to index into a cpumask. As such, a valid ID is needed. If an MPIDR check fails in acpi_map_gic_cpu_interface() it is possible for the entry in cpu_madt_gicc[cpu] == NULL. This function would then cause a NULL pointer dereference. Whilst a path to trigger this has not been established, harden this caller against the possibility. |
| CVE-2024-46821 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix negative array index read Avoid using the negative values for clk_idex as an index into an array pptable->DpmDescriptor. V2: fix clk_index return check (Tim Huang) |
| CVE-2024-46820 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: remove irq disabling in vcn 5 suspend We do not directly enable/disable VCN IRQ in vcn 5.0.0. And we do not handle the IRQ state as well. So the calls to disable IRQ and set state are removed. This effectively gets rid of the warining of "WARN_ON(!amdgpu_irq_enabled(adev, src, type))" in amdgpu_irq_put(). |
| CVE-2024-46819 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: the warning dereferencing obj for nbio_v7_4 if ras_manager obj null, don't print NBIO err data |
| CVE-2024-46818 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check gpio_id before used as array index [WHY & HOW] GPIO_ID_UNKNOWN (-1) is not a valid value for array index and therefore should be checked in advance. This fixes 5 OVERRUN issues reported by Coverity. |
| CVE-2024-46817 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Stop amdgpu_dm initialize when stream nums greater than 6 [Why] Coverity reports OVERRUN warning. Should abort amdgpu_dm initialize. [How] Return failure to amdgpu_dm_init. |
| CVE-2024-46816 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Stop amdgpu_dm initialize when link nums greater than max_links [Why] Coverity report OVERRUN warning. There are only max_links elements within dc->links. link count could up to AMDGPU_DM_MAX_DISPLAY_INDEX 31. [How] Make sure link count less than max_links. |
| CVE-2024-46815 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check num_valid_sets before accessing reader_wm_sets[] [WHY & HOW] num_valid_sets needs to be checked to avoid a negative index when accessing reader_wm_sets[num_valid_sets - 1]. This fixes an OVERRUN issue reported by Coverity. |
| CVE-2024-46814 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check msg_id before processing transcation [WHY & HOW] HDCP_MESSAGE_ID_INVALID (-1) is not a valid msg_id nor is it a valid array index, and it needs checking before used. This fixes 4 OVERRUN issues reported by Coverity. |
| CVE-2024-46813 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check link_index before accessing dc->links[] [WHY & HOW] dc->links[] has max size of MAX_LINKS and NULL is return when trying to access with out-of-bound index. This fixes 3 OVERRUN and 1 RESOURCE_LEAK issues reported by Coverity. |
| CVE-2024-46812 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip inactive planes within ModeSupportAndSystemConfiguration [Why] Coverity reports Memory - illegal accesses. [How] Skip inactive planes. |
| CVE-2024-46811 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index may exceed array range within fpu_update_bw_bounding_box [Why] Coverity reports OVERRUN warning. soc.num_states could be 40. But array range of bw_params->clk_table.entries is 8. [How] Assert if soc.num_states greater than 8. |
| CVE-2024-46810 | In the Linux kernel, the following vulnerability has been resolved: drm/bridge: tc358767: Check if fully initialized before signalling HPD event via IRQ Make sure the connector is fully initialized before signalling any HPD events via drm_kms_helper_hotplug_event(), otherwise this may lead to NULL pointer dereference. |
| CVE-2024-46809 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check BIOS images before it is used BIOS images may fail to load and null checks are added before they are used. This fixes 6 NULL_RETURNS issues reported by Coverity. |
| CVE-2024-46808 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add missing NULL pointer check within dpcd_extend_address_range [Why & How] ASSERT if return NULL from kcalloc. |
| CVE-2024-46807 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: Check tbo resource pointer Validate tbo resource pointer, skip if NULL |
| CVE-2024-46806 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix the warning division or modulo by zero Checks the partition mode and returns an error for an invalid mode. |
| CVE-2024-46805 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix the waring dereferencing hive Check the amdgpu_hive_info *hive that maybe is NULL. |
| CVE-2024-46804 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add array index check for hdcp ddc access [Why] Coverity reports OVERRUN warning. Do not check if array index valid. [How] Check msg_id valid and valid array index. |
| CVE-2024-46803 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check debug trap enable before write dbg_ev_file In interrupt context, write dbg_ev_file will be run by work queue. It will cause write dbg_ev_file execution after debug_trap_disable, which will cause NULL pointer access. v2: cancel work "debug_event_workarea" before set dbg_ev_file as NULL. |
| CVE-2024-46802 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: added NULL check at start of dc_validate_stream [Why] prevent invalid memory access [How] check if dc and stream are NULL |
| CVE-2024-46801 | In the Linux kernel, the following vulnerability has been resolved: libfs: fix get_stashed_dentry() get_stashed_dentry() tries to optimistically retrieve a stashed dentry from a provided location. It needs to ensure to hold rcu lock before it dereference the stashed location to prevent UAF issues. Use rcu_dereference() instead of READ_ONCE() it's effectively equivalent with some lockdep bells and whistles and it communicates clearly that this expects rcu protection. |
| CVE-2024-46800 | In the Linux kernel, the following vulnerability has been resolved: sch/netem: fix use after free in netem_dequeue If netem_dequeue() enqueues packet to inner qdisc and that qdisc returns __NET_XMIT_STOLEN. The packet is dropped but qdisc_tree_reduce_backlog() is not called to update the parent's q.qlen, leading to the similar use-after-free as Commit e04991a48dbaf382 ("netem: fix return value if duplicate enqueue fails") Commands to trigger KASAN UaF: ip link add type dummy ip link set lo up ip link set dummy0 up tc qdisc add dev lo parent root handle 1: drr tc filter add dev lo parent 1: basic classid 1:1 tc class add dev lo classid 1:1 drr tc qdisc add dev lo parent 1:1 handle 2: netem tc qdisc add dev lo parent 2: handle 3: drr tc filter add dev lo parent 3: basic classid 3:1 action mirred egress redirect dev dummy0 tc class add dev lo classid 3:1 drr ping -c1 -W0.01 localhost # Trigger bug tc class del dev lo classid 1:1 tc class add dev lo classid 1:1 drr ping -c1 -W0.01 localhost # UaF |
| CVE-2024-46799 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw: Fix NULL dereference on XDP_TX If number of TX queues are set to 1 we get a NULL pointer dereference during XDP_TX. ~# ethtool -L eth0 tx 1 ~# ./xdp-trafficgen udp -A <ipv6-src> -a <ipv6-dst> eth0 -t 2 Transmitting on eth0 (ifindex 2) [ 241.135257] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 Fix this by using actual TX queues instead of max TX queues when picking the TX channel in am65_cpsw_ndo_xdp_xmit(). |
| CVE-2024-46798 | In the Linux kernel, the following vulnerability has been resolved: ASoC: dapm: Fix UAF for snd_soc_pcm_runtime object When using kernel with the following extra config, - CONFIG_KASAN=y - CONFIG_KASAN_GENERIC=y - CONFIG_KASAN_INLINE=y - CONFIG_KASAN_VMALLOC=y - CONFIG_FRAME_WARN=4096 kernel detects that snd_pcm_suspend_all() access a freed 'snd_soc_pcm_runtime' object when the system is suspended, which leads to a use-after-free bug: [ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270 [ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330 [ 52.047785] Call trace: [ 52.047787] dump_backtrace+0x0/0x3c0 [ 52.047794] show_stack+0x34/0x50 [ 52.047797] dump_stack_lvl+0x68/0x8c [ 52.047802] print_address_description.constprop.0+0x74/0x2c0 [ 52.047809] kasan_report+0x210/0x230 [ 52.047815] __asan_report_load1_noabort+0x3c/0x50 [ 52.047820] snd_pcm_suspend_all+0x1a8/0x270 [ 52.047824] snd_soc_suspend+0x19c/0x4e0 The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before making any access. So we need to always set 'substream->runtime' to NULL everytime we kfree() it. |
| CVE-2024-46797 | In the Linux kernel, the following vulnerability has been resolved: powerpc/qspinlock: Fix deadlock in MCS queue If an interrupt occurs in queued_spin_lock_slowpath() after we increment qnodesp->count and before node->lock is initialized, another CPU might see stale lock values in get_tail_qnode(). If the stale lock value happens to match the lock on that CPU, then we write to the "next" pointer of the wrong qnode. This causes a deadlock as the former CPU, once it becomes the head of the MCS queue, will spin indefinitely until it's "next" pointer is set by its successor in the queue. Running stress-ng on a 16 core (16EC/16VP) shared LPAR, results in occasional lockups similar to the following: $ stress-ng --all 128 --vm-bytes 80% --aggressive \ --maximize --oomable --verify --syslog \ --metrics --times --timeout 5m watchdog: CPU 15 Hard LOCKUP ...... NIP [c0000000000b78f4] queued_spin_lock_slowpath+0x1184/0x1490 LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90 Call Trace: 0xc000002cfffa3bf0 (unreliable) _raw_spin_lock+0x6c/0x90 raw_spin_rq_lock_nested.part.135+0x4c/0xd0 sched_ttwu_pending+0x60/0x1f0 __flush_smp_call_function_queue+0x1dc/0x670 smp_ipi_demux_relaxed+0xa4/0x100 xive_muxed_ipi_action+0x20/0x40 __handle_irq_event_percpu+0x80/0x240 handle_irq_event_percpu+0x2c/0x80 handle_percpu_irq+0x84/0xd0 generic_handle_irq+0x54/0x80 __do_irq+0xac/0x210 __do_IRQ+0x74/0xd0 0x0 do_IRQ+0x8c/0x170 hardware_interrupt_common_virt+0x29c/0x2a0 --- interrupt: 500 at queued_spin_lock_slowpath+0x4b8/0x1490 ...... NIP [c0000000000b6c28] queued_spin_lock_slowpath+0x4b8/0x1490 LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90 --- interrupt: 500 0xc0000029c1a41d00 (unreliable) _raw_spin_lock+0x6c/0x90 futex_wake+0x100/0x260 do_futex+0x21c/0x2a0 sys_futex+0x98/0x270 system_call_exception+0x14c/0x2f0 system_call_vectored_common+0x15c/0x2ec The following code flow illustrates how the deadlock occurs. For the sake of brevity, assume that both locks (A and B) are contended and we call the queued_spin_lock_slowpath() function. CPU0 CPU1 ---- ---- spin_lock_irqsave(A) | spin_unlock_irqrestore(A) | spin_lock(B) | | | ▼ | id = qnodesp->count++; | (Note that nodes[0].lock == A) | | | ▼ | Interrupt | (happens before "nodes[0].lock = B") | | | ▼ | spin_lock_irqsave(A) | | | ▼ | id = qnodesp->count++ | nodes[1].lock = A | | | ▼ | Tail of MCS queue | | spin_lock_irqsave(A) ▼ | Head of MCS queue ▼ | CPU0 is previous tail ▼ | Spin indefinitely ▼ (until "nodes[1].next != NULL") prev = get_tail_qnode(A, CPU0) | ▼ prev == &qnodes[CPU0].nodes[0] (as qnodes ---truncated--- |
| CVE-2024-46796 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double put of @cfile in smb2_set_path_size() If smb2_compound_op() is called with a valid @cfile and returned -EINVAL, we need to call cifs_get_writable_path() before retrying it as the reference of @cfile was already dropped by previous call. This fixes the following KASAN splat when running fstests generic/013 against Windows Server 2022: CIFS: Attempting to mount //w22-fs0/scratch run fstests generic/013 at 2024-09-02 19:48:59 ================================================================== BUG: KASAN: slab-use-after-free in detach_if_pending+0xab/0x200 Write of size 8 at addr ffff88811f1a3730 by task kworker/3:2/176 CPU: 3 UID: 0 PID: 176 Comm: kworker/3:2 Not tainted 6.11.0-rc6 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Workqueue: cifsoplockd cifs_oplock_break [cifs] Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? detach_if_pending+0xab/0x200 print_report+0x156/0x4d9 ? detach_if_pending+0xab/0x200 ? __virt_addr_valid+0x145/0x300 ? __phys_addr+0x46/0x90 ? detach_if_pending+0xab/0x200 kasan_report+0xda/0x110 ? detach_if_pending+0xab/0x200 detach_if_pending+0xab/0x200 timer_delete+0x96/0xe0 ? __pfx_timer_delete+0x10/0x10 ? rcu_is_watching+0x20/0x50 try_to_grab_pending+0x46/0x3b0 __cancel_work+0x89/0x1b0 ? __pfx___cancel_work+0x10/0x10 ? kasan_save_track+0x14/0x30 cifs_close_deferred_file+0x110/0x2c0 [cifs] ? __pfx_cifs_close_deferred_file+0x10/0x10 [cifs] ? __pfx_down_read+0x10/0x10 cifs_oplock_break+0x4c1/0xa50 [cifs] ? __pfx_cifs_oplock_break+0x10/0x10 [cifs] ? lock_is_held_type+0x85/0xf0 ? mark_held_locks+0x1a/0x90 process_one_work+0x4c6/0x9f0 ? find_held_lock+0x8a/0xa0 ? __pfx_process_one_work+0x10/0x10 ? lock_acquired+0x220/0x550 ? __list_add_valid_or_report+0x37/0x100 worker_thread+0x2e4/0x570 ? __kthread_parkme+0xd1/0xf0 ? __pfx_worker_thread+0x10/0x10 kthread+0x17f/0x1c0 ? kthread+0xda/0x1c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1118: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 cifs_new_fileinfo+0xc8/0x9d0 [cifs] cifs_atomic_open+0x467/0x770 [cifs] lookup_open.isra.0+0x665/0x8b0 path_openat+0x4c3/0x1380 do_filp_open+0x167/0x270 do_sys_openat2+0x129/0x160 __x64_sys_creat+0xad/0xe0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 83: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 poison_slab_object+0xe9/0x160 __kasan_slab_free+0x32/0x50 kfree+0xf2/0x300 process_one_work+0x4c6/0x9f0 worker_thread+0x2e4/0x570 kthread+0x17f/0x1c0 ret_from_fork+0x31/0x60 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x30/0x50 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x29/0xe0 __queue_work+0x5ea/0x760 queue_work_on+0x6d/0x90 _cifsFileInfo_put+0x3f6/0x770 [cifs] smb2_compound_op+0x911/0x3940 [cifs] smb2_set_path_size+0x228/0x270 [cifs] cifs_set_file_size+0x197/0x460 [cifs] cifs_setattr+0xd9c/0x14b0 [cifs] notify_change+0x4e3/0x740 do_truncate+0xfa/0x180 vfs_truncate+0x195/0x200 __x64_sys_truncate+0x109/0x150 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| CVE-2024-46795 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: unset the binding mark of a reused connection Steve French reported null pointer dereference error from sha256 lib. cifs.ko can send session setup requests on reused connection. If reused connection is used for binding session, conn->binding can still remain true and generate_preauth_hash() will not set sess->Preauth_HashValue and it will be NULL. It is used as a material to create an encryption key in ksmbd_gen_smb311_encryptionkey. ->Preauth_HashValue cause null pointer dereference error from crypto_shash_update(). BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 8 PID: 429254 Comm: kworker/8:39 Hardware name: LENOVO 20MAS08500/20MAS08500, BIOS N2CET69W (1.52 ) Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] RIP: 0010:lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3] <TASK> ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? do_user_addr_fault+0x2ee/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] ? lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3] ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] _sha256_update+0x77/0xa0 [sha256_ssse3] sha256_avx2_update+0x15/0x30 [sha256_ssse3] crypto_shash_update+0x1e/0x40 hmac_update+0x12/0x20 crypto_shash_update+0x1e/0x40 generate_key+0x234/0x380 [ksmbd] generate_smb3encryptionkey+0x40/0x1c0 [ksmbd] ksmbd_gen_smb311_encryptionkey+0x72/0xa0 [ksmbd] ntlm_authenticate.isra.0+0x423/0x5d0 [ksmbd] smb2_sess_setup+0x952/0xaa0 [ksmbd] __process_request+0xa3/0x1d0 [ksmbd] __handle_ksmbd_work+0x1c4/0x2f0 [ksmbd] handle_ksmbd_work+0x2d/0xa0 [ksmbd] process_one_work+0x16c/0x350 worker_thread+0x306/0x440 ? __pfx_worker_thread+0x10/0x10 kthread+0xef/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x44/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> |
| CVE-2024-46794 | In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Fix data leak in mmio_read() The mmio_read() function makes a TDVMCALL to retrieve MMIO data for an address from the VMM. Sean noticed that mmio_read() unintentionally exposes the value of an initialized variable (val) on the stack to the VMM. This variable is only needed as an output value. It did not need to be passed to the VMM in the first place. Do not send the original value of *val to the VMM. [ dhansen: clarify what 'val' is used for. ] |
| CVE-2024-46793 | In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards harder Since commit 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()") dummy codecs declared like this: SND_SOC_DAILINK_DEF(dummy, DAILINK_COMP_ARRAY(COMP_DUMMY())); expand to: static struct snd_soc_dai_link_component dummy[] = { }; Which means that dummy is a zero sized array and thus dais[i].codecs should not be dereferenced *at all* since it points to the address of the next variable stored in the data section as the "dummy" variable has an address but no size, so even dereferencing dais[0] is already an out of bounds array reference. Which means that the if (dais[i].codecs->name) check added in commit 7d99a70b6595 ("ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards") relies on that the part of the next variable which the name member maps to just happens to be NULL. Which apparently so far it usually is, except when it isn't and then it results in crashes like this one: [ 28.795659] BUG: unable to handle page fault for address: 0000000000030011 ... [ 28.795780] Call Trace: [ 28.795787] <TASK> ... [ 28.795862] ? strcmp+0x18/0x40 [ 28.795872] 0xffffffffc150c605 [ 28.795887] platform_probe+0x40/0xa0 ... [ 28.795979] ? __pfx_init_module+0x10/0x10 [snd_soc_sst_bytcr_wm5102] Really fix things this time around by checking dais.num_codecs != 0. |
| CVE-2024-46792 | In the Linux kernel, the following vulnerability has been resolved: riscv: misaligned: Restrict user access to kernel memory raw_copy_{to,from}_user() do not call access_ok(), so this code allowed userspace to access any virtual memory address. |
| CVE-2024-46791 | In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open The mcp251x_hw_wake() function is called with the mpc_lock mutex held and disables the interrupt handler so that no interrupts can be processed while waking the device. If an interrupt has already occurred then waiting for the interrupt handler to complete will deadlock because it will be trying to acquire the same mutex. CPU0 CPU1 ---- ---- mcp251x_open() mutex_lock(&priv->mcp_lock) request_threaded_irq() <interrupt> mcp251x_can_ist() mutex_lock(&priv->mcp_lock) mcp251x_hw_wake() disable_irq() <-- deadlock Use disable_irq_nosync() instead because the interrupt handler does everything while holding the mutex so it doesn't matter if it's still running. |
| CVE-2024-46790 | In the Linux kernel, the following vulnerability has been resolved: codetag: debug: mark codetags for poisoned page as empty When PG_hwpoison pages are freed they are treated differently in free_pages_prepare() and instead of being released they are isolated. Page allocation tag counters are decremented at this point since the page is considered not in use. Later on when such pages are released by unpoison_memory(), the allocation tag counters will be decremented again and the following warning gets reported: [ 113.930443][ T3282] ------------[ cut here ]------------ [ 113.931105][ T3282] alloc_tag was not set [ 113.931576][ T3282] WARNING: CPU: 2 PID: 3282 at ./include/linux/alloc_tag.h:130 pgalloc_tag_sub.part.66+0x154/0x164 [ 113.932866][ T3282] Modules linked in: hwpoison_inject fuse ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute ip6table_nat ip6table_man4 [ 113.941638][ T3282] CPU: 2 UID: 0 PID: 3282 Comm: madvise11 Kdump: loaded Tainted: G W 6.11.0-rc4-dirty #18 [ 113.943003][ T3282] Tainted: [W]=WARN [ 113.943453][ T3282] Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 [ 113.944378][ T3282] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 113.945319][ T3282] pc : pgalloc_tag_sub.part.66+0x154/0x164 [ 113.946016][ T3282] lr : pgalloc_tag_sub.part.66+0x154/0x164 [ 113.946706][ T3282] sp : ffff800087093a10 [ 113.947197][ T3282] x29: ffff800087093a10 x28: ffff0000d7a9d400 x27: ffff80008249f0a0 [ 113.948165][ T3282] x26: 0000000000000000 x25: ffff80008249f2b0 x24: 0000000000000000 [ 113.949134][ T3282] x23: 0000000000000001 x22: 0000000000000001 x21: 0000000000000000 [ 113.950597][ T3282] x20: ffff0000c08fcad8 x19: ffff80008251e000 x18: ffffffffffffffff [ 113.952207][ T3282] x17: 0000000000000000 x16: 0000000000000000 x15: ffff800081746210 [ 113.953161][ T3282] x14: 0000000000000000 x13: 205d323832335420 x12: 5b5d353031313339 [ 113.954120][ T3282] x11: ffff800087093500 x10: 000000000000005d x9 : 00000000ffffffd0 [ 113.955078][ T3282] x8 : 7f7f7f7f7f7f7f7f x7 : ffff80008236ba90 x6 : c0000000ffff7fff [ 113.956036][ T3282] x5 : ffff000b34bf4dc8 x4 : ffff8000820aba90 x3 : 0000000000000001 [ 113.956994][ T3282] x2 : ffff800ab320f000 x1 : 841d1e35ac932e00 x0 : 0000000000000000 [ 113.957962][ T3282] Call trace: [ 113.958350][ T3282] pgalloc_tag_sub.part.66+0x154/0x164 [ 113.959000][ T3282] pgalloc_tag_sub+0x14/0x1c [ 113.959539][ T3282] free_unref_page+0xf4/0x4b8 [ 113.960096][ T3282] __folio_put+0xd4/0x120 [ 113.960614][ T3282] folio_put+0x24/0x50 [ 113.961103][ T3282] unpoison_memory+0x4f0/0x5b0 [ 113.961678][ T3282] hwpoison_unpoison+0x30/0x48 [hwpoison_inject] [ 113.962436][ T3282] simple_attr_write_xsigned.isra.34+0xec/0x1cc [ 113.963183][ T3282] simple_attr_write+0x38/0x48 [ 113.963750][ T3282] debugfs_attr_write+0x54/0x80 [ 113.964330][ T3282] full_proxy_write+0x68/0x98 [ 113.964880][ T3282] vfs_write+0xdc/0x4d0 [ 113.965372][ T3282] ksys_write+0x78/0x100 [ 113.965875][ T3282] __arm64_sys_write+0x24/0x30 [ 113.966440][ T3282] invoke_syscall+0x7c/0x104 [ 113.966984][ T3282] el0_svc_common.constprop.1+0x88/0x104 [ 113.967652][ T3282] do_el0_svc+0x2c/0x38 [ 113.968893][ T3282] el0_svc+0x3c/0x1b8 [ 113.969379][ T3282] el0t_64_sync_handler+0x98/0xbc [ 113.969980][ T3282] el0t_64_sync+0x19c/0x1a0 [ 113.970511][ T3282] ---[ end trace 0000000000000000 ]--- To fix this, clear the page tag reference after the page got isolated and accounted for. |
| CVE-2024-46789 | In the Linux kernel, the following vulnerability has been resolved: mm/slub: add check for s->flags in the alloc_tagging_slab_free_hook When enable CONFIG_MEMCG & CONFIG_KFENCE & CONFIG_KMEMLEAK, the following warning always occurs,This is because the following call stack occurred: mem_pool_alloc kmem_cache_alloc_noprof slab_alloc_node kfence_alloc Once the kfence allocation is successful,slab->obj_exts will not be empty, because it has already been assigned a value in kfence_init_pool. Since in the prepare_slab_obj_exts_hook function,we perform a check for s->flags & (SLAB_NO_OBJ_EXT | SLAB_NOLEAKTRACE),the alloc_tag_add function will not be called as a result.Therefore,ref->ct remains NULL. However,when we call mem_pool_free,since obj_ext is not empty, it eventually leads to the alloc_tag_sub scenario being invoked. This is where the warning occurs. So we should add corresponding checks in the alloc_tagging_slab_free_hook. For __GFP_NO_OBJ_EXT case,I didn't see the specific case where it's using kfence,so I won't add the corresponding check in alloc_tagging_slab_free_hook for now. [ 3.734349] ------------[ cut here ]------------ [ 3.734807] alloc_tag was not set [ 3.735129] WARNING: CPU: 4 PID: 40 at ./include/linux/alloc_tag.h:130 kmem_cache_free+0x444/0x574 [ 3.735866] Modules linked in: autofs4 [ 3.736211] CPU: 4 UID: 0 PID: 40 Comm: ksoftirqd/4 Tainted: G W 6.11.0-rc3-dirty #1 [ 3.736969] Tainted: [W]=WARN [ 3.737258] Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 [ 3.737875] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3.738501] pc : kmem_cache_free+0x444/0x574 [ 3.738951] lr : kmem_cache_free+0x444/0x574 [ 3.739361] sp : ffff80008357bb60 [ 3.739693] x29: ffff80008357bb70 x28: 0000000000000000 x27: 0000000000000000 [ 3.740338] x26: ffff80008207f000 x25: ffff000b2eb2fd60 x24: ffff0000c0005700 [ 3.740982] x23: ffff8000804229e4 x22: ffff800082080000 x21: ffff800081756000 [ 3.741630] x20: fffffd7ff8253360 x19: 00000000000000a8 x18: ffffffffffffffff [ 3.742274] x17: ffff800ab327f000 x16: ffff800083398000 x15: ffff800081756df0 [ 3.742919] x14: 0000000000000000 x13: 205d344320202020 x12: 5b5d373038343337 [ 3.743560] x11: ffff80008357b650 x10: 000000000000005d x9 : 00000000ffffffd0 [ 3.744231] x8 : 7f7f7f7f7f7f7f7f x7 : ffff80008237bad0 x6 : c0000000ffff7fff [ 3.744907] x5 : ffff80008237ba78 x4 : ffff8000820bbad0 x3 : 0000000000000001 [ 3.745580] x2 : 68d66547c09f7800 x1 : 68d66547c09f7800 x0 : 0000000000000000 [ 3.746255] Call trace: [ 3.746530] kmem_cache_free+0x444/0x574 [ 3.746931] mem_pool_free+0x44/0xf4 [ 3.747306] free_object_rcu+0xc8/0xdc [ 3.747693] rcu_do_batch+0x234/0x8a4 [ 3.748075] rcu_core+0x230/0x3e4 [ 3.748424] rcu_core_si+0x14/0x1c [ 3.748780] handle_softirqs+0x134/0x378 [ 3.749189] run_ksoftirqd+0x70/0x9c [ 3.749560] smpboot_thread_fn+0x148/0x22c [ 3.749978] kthread+0x10c/0x118 [ 3.750323] ret_from_fork+0x10/0x20 [ 3.750696] ---[ end trace 0000000000000000 ]--- |
| CVE-2024-46788 | In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Use a cpumask to know what threads are kthreads The start_kthread() and stop_thread() code was not always called with the interface_lock held. This means that the kthread variable could be unexpectedly changed causing the kthread_stop() to be called on it when it should not have been, leading to: while true; do rtla timerlat top -u -q & PID=$!; sleep 5; kill -INT $PID; sleep 0.001; kill -TERM $PID; wait $PID; done Causing the following OOPS: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:hrtimer_active+0x58/0x300 Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f RSP: 0018:ffff88811d97f940 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28 RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60 R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28 FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0 Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x154/0x230 ? asm_exc_general_protection+0x26/0x30 ? hrtimer_active+0x58/0x300 ? __pfx_mutex_lock+0x10/0x10 ? __pfx_locks_remove_file+0x10/0x10 hrtimer_cancel+0x15/0x40 timerlat_fd_release+0x8e/0x1f0 ? security_file_release+0x43/0x80 __fput+0x372/0xb10 task_work_run+0x11e/0x1f0 ? _raw_spin_lock+0x85/0xe0 ? __pfx_task_work_run+0x10/0x10 ? poison_slab_object+0x109/0x170 ? do_exit+0x7a0/0x24b0 do_exit+0x7bd/0x24b0 ? __pfx_migrate_enable+0x10/0x10 ? __pfx_do_exit+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x64/0x140 ? _raw_spin_lock_irq+0x86/0xe0 do_group_exit+0xb0/0x220 get_signal+0x17ba/0x1b50 ? vfs_read+0x179/0xa40 ? timerlat_fd_read+0x30b/0x9d0 ? __pfx_get_signal+0x10/0x10 ? __pfx_timerlat_fd_read+0x10/0x10 arch_do_signal_or_restart+0x8c/0x570 ? __pfx_arch_do_signal_or_restart+0x10/0x10 ? vfs_read+0x179/0xa40 ? ksys_read+0xfe/0x1d0 ? __pfx_ksys_read+0x10/0x10 syscall_exit_to_user_mode+0xbc/0x130 do_syscall_64+0x74/0x110 ? __pfx___rseq_handle_notify_resume+0x10/0x10 ? __pfx_ksys_read+0x10/0x10 ? fpregs_restore_userregs+0xdb/0x1e0 ? fpregs_restore_userregs+0xdb/0x1e0 ? syscall_exit_to_user_mode+0x116/0x130 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7ff0070eca9c Code: Unable to access opcode bytes at 0x7ff0070eca72. RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003 RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0 R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008 </TASK> Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core ---[ end trace 0000000000000000 ]--- This is because it would mistakenly call kthread_stop() on a user space thread making it "exit" before it actually exits. Since kthread ---truncated--- |
| CVE-2024-46787 | In the Linux kernel, the following vulnerability has been resolved: userfaultfd: fix checks for huge PMDs Patch series "userfaultfd: fix races around pmd_trans_huge() check", v2. The pmd_trans_huge() code in mfill_atomic() is wrong in three different ways depending on kernel version: 1. The pmd_trans_huge() check is racy and can lead to a BUG_ON() (if you hit the right two race windows) - I've tested this in a kernel build with some extra mdelay() calls. See the commit message for a description of the race scenario. On older kernels (before 6.5), I think the same bug can even theoretically lead to accessing transhuge page contents as a page table if you hit the right 5 narrow race windows (I haven't tested this case). 2. As pointed out by Qi Zheng, pmd_trans_huge() is not sufficient for detecting PMDs that don't point to page tables. On older kernels (before 6.5), you'd just have to win a single fairly wide race to hit this. I've tested this on 6.1 stable by racing migration (with a mdelay() patched into try_to_migrate()) against UFFDIO_ZEROPAGE - on my x86 VM, that causes a kernel oops in ptlock_ptr(). 3. On newer kernels (>=6.5), for shmem mappings, khugepaged is allowed to yank page tables out from under us (though I haven't tested that), so I think the BUG_ON() checks in mfill_atomic() are just wrong. I decided to write two separate fixes for these (one fix for bugs 1+2, one fix for bug 3), so that the first fix can be backported to kernels affected by bugs 1+2. This patch (of 2): This fixes two issues. I discovered that the following race can occur: mfill_atomic other thread ============ ============ <zap PMD> pmdp_get_lockless() [reads none pmd] <bail if trans_huge> <if none:> <pagefault creates transhuge zeropage> __pte_alloc [no-op] <zap PMD> <bail if pmd_trans_huge(*dst_pmd)> BUG_ON(pmd_none(*dst_pmd)) I have experimentally verified this in a kernel with extra mdelay() calls; the BUG_ON(pmd_none(*dst_pmd)) triggers. On kernels newer than commit 0d940a9b270b ("mm/pgtable: allow pte_offset_map[_lock]() to fail"), this can't lead to anything worse than a BUG_ON(), since the page table access helpers are actually designed to deal with page tables concurrently disappearing; but on older kernels (<=6.4), I think we could probably theoretically race past the two BUG_ON() checks and end up treating a hugepage as a page table. The second issue is that, as Qi Zheng pointed out, there are other types of huge PMDs that pmd_trans_huge() can't catch: devmap PMDs and swap PMDs (in particular, migration PMDs). On <=6.4, this is worse than the first issue: If mfill_atomic() runs on a PMD that contains a migration entry (which just requires winning a single, fairly wide race), it will pass the PMD to pte_offset_map_lock(), which assumes that the PMD points to a page table. Breakage follows: First, the kernel tries to take the PTE lock (which will crash or maybe worse if there is no "struct page" for the address bits in the migration entry PMD - I think at least on X86 there usually is no corresponding "struct page" thanks to the PTE inversion mitigation, amd64 looks different). If that didn't crash, the kernel would next try to write a PTE into what it wrongly thinks is a page table. As part of fixing these issues, get rid of the check for pmd_trans_huge() before __pte_alloc() - that's redundant, we're going to have to check for that after the __pte_alloc() anyway. Backport note: pmdp_get_lockless() is pmd_read_atomic() in older kernels. |
| CVE-2024-46786 | In the Linux kernel, the following vulnerability has been resolved: fscache: delete fscache_cookie_lru_timer when fscache exits to avoid UAF The fscache_cookie_lru_timer is initialized when the fscache module is inserted, but is not deleted when the fscache module is removed. If timer_reduce() is called before removing the fscache module, the fscache_cookie_lru_timer will be added to the timer list of the current cpu. Afterwards, a use-after-free will be triggered in the softIRQ after removing the fscache module, as follows: ================================================================== BUG: unable to handle page fault for address: fffffbfff803c9e9 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 21ffea067 P4D 21ffea067 PUD 21ffe6067 PMD 110a7c067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Tainted: G W 6.11.0-rc3 #855 Tainted: [W]=WARN RIP: 0010:__run_timer_base.part.0+0x254/0x8a0 Call Trace: <IRQ> tmigr_handle_remote_up+0x627/0x810 __walk_groups.isra.0+0x47/0x140 tmigr_handle_remote+0x1fa/0x2f0 handle_softirqs+0x180/0x590 irq_exit_rcu+0x84/0xb0 sysvec_apic_timer_interrupt+0x6e/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:default_idle+0xf/0x20 default_idle_call+0x38/0x60 do_idle+0x2b5/0x300 cpu_startup_entry+0x54/0x60 start_secondary+0x20d/0x280 common_startup_64+0x13e/0x148 </TASK> Modules linked in: [last unloaded: netfs] ================================================================== Therefore delete fscache_cookie_lru_timer when removing the fscahe module. |
| CVE-2024-46785 | In the Linux kernel, the following vulnerability has been resolved: eventfs: Use list_del_rcu() for SRCU protected list variable Chi Zhiling reported: We found a null pointer accessing in tracefs[1], the reason is that the variable 'ei_child' is set to LIST_POISON1, that means the list was removed in eventfs_remove_rec. so when access the ei_child->is_freed, the panic triggered. by the way, the following script can reproduce this panic loop1 (){ while true do echo "p:kp submit_bio" > /sys/kernel/debug/tracing/kprobe_events echo "" > /sys/kernel/debug/tracing/kprobe_events done } loop2 (){ while true do tree /sys/kernel/debug/tracing/events/kprobes/ done } loop1 & loop2 [1]: [ 1147.959632][T17331] Unable to handle kernel paging request at virtual address dead000000000150 [ 1147.968239][T17331] Mem abort info: [ 1147.971739][T17331] ESR = 0x0000000096000004 [ 1147.976172][T17331] EC = 0x25: DABT (current EL), IL = 32 bits [ 1147.982171][T17331] SET = 0, FnV = 0 [ 1147.985906][T17331] EA = 0, S1PTW = 0 [ 1147.989734][T17331] FSC = 0x04: level 0 translation fault [ 1147.995292][T17331] Data abort info: [ 1147.998858][T17331] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1148.005023][T17331] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1148.010759][T17331] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1148.016752][T17331] [dead000000000150] address between user and kernel address ranges [ 1148.024571][T17331] Internal error: Oops: 0000000096000004 [#1] SMP [ 1148.030825][T17331] Modules linked in: team_mode_loadbalance team nlmon act_gact cls_flower sch_ingress bonding tls macvlan dummy ib_core bridge stp llc veth amdgpu amdxcp mfd_core gpu_sched drm_exec drm_buddy radeon crct10dif_ce video drm_suballoc_helper ghash_ce drm_ttm_helper sha2_ce ttm sha256_arm64 i2c_algo_bit sha1_ce sbsa_gwdt cp210x drm_display_helper cec sr_mod cdrom drm_kms_helper binfmt_misc sg loop fuse drm dm_mod nfnetlink ip_tables autofs4 [last unloaded: tls] [ 1148.072808][T17331] CPU: 3 PID: 17331 Comm: ls Tainted: G W ------- ---- 6.6.43 #2 [ 1148.081751][T17331] Source Version: 21b3b386e948bedd29369af66f3e98ab01b1c650 [ 1148.088783][T17331] Hardware name: Greatwall GW-001M1A-FTF/GW-001M1A-FTF, BIOS KunLun BIOS V4.0 07/16/2020 [ 1148.098419][T17331] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1148.106060][T17331] pc : eventfs_iterate+0x2c0/0x398 [ 1148.111017][T17331] lr : eventfs_iterate+0x2fc/0x398 [ 1148.115969][T17331] sp : ffff80008d56bbd0 [ 1148.119964][T17331] x29: ffff80008d56bbf0 x28: ffff001ff5be2600 x27: 0000000000000000 [ 1148.127781][T17331] x26: ffff001ff52ca4e0 x25: 0000000000009977 x24: dead000000000100 [ 1148.135598][T17331] x23: 0000000000000000 x22: 000000000000000b x21: ffff800082645f10 [ 1148.143415][T17331] x20: ffff001fddf87c70 x19: ffff80008d56bc90 x18: 0000000000000000 [ 1148.151231][T17331] x17: 0000000000000000 x16: 0000000000000000 x15: ffff001ff52ca4e0 [ 1148.159048][T17331] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 1148.166864][T17331] x11: 0000000000000000 x10: 0000000000000000 x9 : ffff8000804391d0 [ 1148.174680][T17331] x8 : 0000000180000000 x7 : 0000000000000018 x6 : 0000aaab04b92862 [ 1148.182498][T17331] x5 : 0000aaab04b92862 x4 : 0000000080000000 x3 : 0000000000000068 [ 1148.190314][T17331] x2 : 000000000000000f x1 : 0000000000007ea8 x0 : 0000000000000001 [ 1148.198131][T17331] Call trace: [ 1148.201259][T17331] eventfs_iterate+0x2c0/0x398 [ 1148.205864][T17331] iterate_dir+0x98/0x188 [ 1148.210036][T17331] __arm64_sys_getdents64+0x78/0x160 [ 1148.215161][T17331] invoke_syscall+0x78/0x108 [ 1148.219593][T17331] el0_svc_common.constprop.0+0x48/0xf0 [ 1148.224977][T17331] do_el0_svc+0x24/0x38 [ 1148.228974][T17331] el0_svc+0x40/0x168 [ 1148.232798][T17 ---truncated--- |
| CVE-2024-46784 | In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup Currently napi_disable() gets called during rxq and txq cleanup, even before napi is enabled and hrtimer is initialized. It causes kernel panic. ? page_fault_oops+0x136/0x2b0 ? page_counter_cancel+0x2e/0x80 ? do_user_addr_fault+0x2f2/0x640 ? refill_obj_stock+0xc4/0x110 ? exc_page_fault+0x71/0x160 ? asm_exc_page_fault+0x27/0x30 ? __mmdrop+0x10/0x180 ? __mmdrop+0xec/0x180 ? hrtimer_active+0xd/0x50 hrtimer_try_to_cancel+0x2c/0xf0 hrtimer_cancel+0x15/0x30 napi_disable+0x65/0x90 mana_destroy_rxq+0x4c/0x2f0 mana_create_rxq.isra.0+0x56c/0x6d0 ? mana_uncfg_vport+0x50/0x50 mana_alloc_queues+0x21b/0x320 ? skb_dequeue+0x5f/0x80 |
| CVE-2024-46783 | In the Linux kernel, the following vulnerability has been resolved: tcp_bpf: fix return value of tcp_bpf_sendmsg() When we cork messages in psock->cork, the last message triggers the flushing will result in sending a sk_msg larger than the current message size. In this case, in tcp_bpf_send_verdict(), 'copied' becomes negative at least in the following case: 468 case __SK_DROP: 469 default: 470 sk_msg_free_partial(sk, msg, tosend); 471 sk_msg_apply_bytes(psock, tosend); 472 *copied -= (tosend + delta); // <==== HERE 473 return -EACCES; Therefore, it could lead to the following BUG with a proper value of 'copied' (thanks to syzbot). We should not use negative 'copied' as a return value here. ------------[ cut here ]------------ kernel BUG at net/socket.c:733! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 UID: 0 PID: 3265 Comm: syz-executor510 Not tainted 6.11.0-rc3-syzkaller-00060-gd07b43284ab3 #0 Hardware name: linux,dummy-virt (DT) pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : sock_sendmsg_nosec net/socket.c:733 [inline] pc : sock_sendmsg_nosec net/socket.c:728 [inline] pc : __sock_sendmsg+0x5c/0x60 net/socket.c:745 lr : sock_sendmsg_nosec net/socket.c:730 [inline] lr : __sock_sendmsg+0x54/0x60 net/socket.c:745 sp : ffff800088ea3b30 x29: ffff800088ea3b30 x28: fbf00000062bc900 x27: 0000000000000000 x26: ffff800088ea3bc0 x25: ffff800088ea3bc0 x24: 0000000000000000 x23: f9f00000048dc000 x22: 0000000000000000 x21: ffff800088ea3d90 x20: f9f00000048dc000 x19: ffff800088ea3d90 x18: 0000000000000001 x17: 0000000000000000 x16: 0000000000000000 x15: 000000002002ffaf x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff8000815849c0 x9 : ffff8000815b49c0 x8 : 0000000000000000 x7 : 000000000000003f x6 : 0000000000000000 x5 : 00000000000007e0 x4 : fff07ffffd239000 x3 : fbf00000062bc900 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 00000000fffffdef Call trace: sock_sendmsg_nosec net/socket.c:733 [inline] __sock_sendmsg+0x5c/0x60 net/socket.c:745 ____sys_sendmsg+0x274/0x2ac net/socket.c:2597 ___sys_sendmsg+0xac/0x100 net/socket.c:2651 __sys_sendmsg+0x84/0xe0 net/socket.c:2680 __do_sys_sendmsg net/socket.c:2689 [inline] __se_sys_sendmsg net/socket.c:2687 [inline] __arm64_sys_sendmsg+0x24/0x30 net/socket.c:2687 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x48/0x110 arch/arm64/kernel/syscall.c:49 el0_svc_common.constprop.0+0x40/0xe0 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x1c/0x28 arch/arm64/kernel/syscall.c:151 el0_svc+0x34/0xec arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x100/0x12c arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x19c/0x1a0 arch/arm64/kernel/entry.S:598 Code: f9404463 d63f0060 3108441f 54fffe81 (d4210000) ---[ end trace 0000000000000000 ]--- |
| CVE-2024-46782 | In the Linux kernel, the following vulnerability has been resolved: ila: call nf_unregister_net_hooks() sooner syzbot found an use-after-free Read in ila_nf_input [1] Issue here is that ila_xlat_exit_net() frees the rhashtable, then call nf_unregister_net_hooks(). It should be done in the reverse way, with a synchronize_rcu(). This is a good match for a pre_exit() method. [1] BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline] BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline] BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16 CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 rht_key_hashfn include/linux/rhashtable.h:159 [inline] __rhashtable_lookup include/linux/rhashtable.h:604 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline] ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline] ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 run_ksoftirqd+0xca/0x130 kernel/softirq.c:928 smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) page_type: 0xbfffffff(buddy) raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000 raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493 prep_new_page mm/page_alloc.c:1501 [inline] get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439 __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695 __alloc_pages_node_noprof include/linux/gfp.h:269 [inline] alloc_pages_node_noprof include/linux/gfp.h:296 [inline] ___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103 __kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130 __do_kmalloc_node mm/slub.c:4146 [inline] __kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164 __kvmalloc_node_noprof+0x72/0x190 mm/util.c:650 bucket_table_alloc lib/rhashtable.c:186 [inline] rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071 ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613 ops_ini ---truncated--- |
| CVE-2024-46781 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix missing cleanup on rollforward recovery error In an error injection test of a routine for mount-time recovery, KASAN found a use-after-free bug. It turned out that if data recovery was performed using partial logs created by dsync writes, but an error occurred before starting the log writer to create a recovered checkpoint, the inodes whose data had been recovered were left in the ns_dirty_files list of the nilfs object and were not freed. Fix this issue by cleaning up inodes that have read the recovery data if the recovery routine fails midway before the log writer starts. |
| CVE-2024-46780 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: protect references to superblock parameters exposed in sysfs The superblock buffers of nilfs2 can not only be overwritten at runtime for modifications/repairs, but they are also regularly swapped, replaced during resizing, and even abandoned when degrading to one side due to backing device issues. So, accessing them requires mutual exclusion using the reader/writer semaphore "nilfs->ns_sem". Some sysfs attribute show methods read this superblock buffer without the necessary mutual exclusion, which can cause problems with pointer dereferencing and memory access, so fix it. |
| CVE-2024-46779 | In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Free pvr_vm_gpuva after unlink This caused a measurable memory leak. Although the individual allocations are small, the leaks occurs in a high-usage codepath (remapping or unmapping device memory) so they add up quickly. |
| CVE-2024-46778 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check UnboundedRequestEnabled's value CalculateSwathAndDETConfiguration_params_st's UnboundedRequestEnabled is a pointer (i.e. dml_bool_t *UnboundedRequestEnabled), and thus if (p->UnboundedRequestEnabled) checks its address, not bool value. This fixes 1 REVERSE_INULL issue reported by Coverity. |
| CVE-2024-46777 | In the Linux kernel, the following vulnerability has been resolved: udf: Avoid excessive partition lengths Avoid mounting filesystems where the partition would overflow the 32-bits used for block number. Also refuse to mount filesystems where the partition length is so large we cannot safely index bits in a block bitmap. |
| CVE-2024-46776 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Run DC_LOG_DC after checking link->link_enc [WHAT] The DC_LOG_DC should be run after link->link_enc is checked, not before. This fixes 1 REVERSE_INULL issue reported by Coverity. |
| CVE-2024-46775 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Validate function returns [WHAT & HOW] Function return values must be checked before data can be used in subsequent functions. This fixes 4 CHECKED_RETURN issues reported by Coverity. |
| CVE-2024-46774 | In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas: Prevent Spectre v1 gadget construction in sys_rtas() Smatch warns: arch/powerpc/kernel/rtas.c:1932 __do_sys_rtas() warn: potential spectre issue 'args.args' [r] (local cap) The 'nargs' and 'nret' locals come directly from a user-supplied buffer and are used as indexes into a small stack-based array and as inputs to copy_to_user() after they are subject to bounds checks. Use array_index_nospec() after the bounds checks to clamp these values for speculative execution. |
| CVE-2024-46773 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check denominator pbn_div before used [WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 1 DIVIDE_BY_ZERO issue reported by Coverity. |
| CVE-2024-46772 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check denominator crb_pipes before used [WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 2 DIVIDE_BY_ZERO issues reported by Coverity. |
| CVE-2024-46771 | In the Linux kernel, the following vulnerability has been resolved: can: bcm: Remove proc entry when dev is unregistered. syzkaller reported a warning in bcm_connect() below. [0] The repro calls connect() to vxcan1, removes vxcan1, and calls connect() with ifindex == 0. Calling connect() for a BCM socket allocates a proc entry. Then, bcm_sk(sk)->bound is set to 1 to prevent further connect(). However, removing the bound device resets bcm_sk(sk)->bound to 0 in bcm_notify(). The 2nd connect() tries to allocate a proc entry with the same name and sets NULL to bcm_sk(sk)->bcm_proc_read, leaking the original proc entry. Since the proc entry is available only for connect()ed sockets, let's clean up the entry when the bound netdev is unregistered. [0]: proc_dir_entry 'can-bcm/2456' already registered WARNING: CPU: 1 PID: 394 at fs/proc/generic.c:376 proc_register+0x645/0x8f0 fs/proc/generic.c:375 Modules linked in: CPU: 1 PID: 394 Comm: syz-executor403 Not tainted 6.10.0-rc7-g852e42cc2dd4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:proc_register+0x645/0x8f0 fs/proc/generic.c:375 Code: 00 00 00 00 00 48 85 ed 0f 85 97 02 00 00 4d 85 f6 0f 85 9f 02 00 00 48 c7 c7 9b cb cf 87 48 89 de 4c 89 fa e8 1c 6f eb fe 90 <0f> 0b 90 90 48 c7 c7 98 37 99 89 e8 cb 7e 22 05 bb 00 00 00 10 48 RSP: 0018:ffa0000000cd7c30 EFLAGS: 00010246 RAX: 9e129be1950f0200 RBX: ff1100011b51582c RCX: ff1100011857cd80 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 RBP: 0000000000000000 R08: ffd400000000000f R09: ff1100013e78cac0 R10: ffac800000cd7980 R11: ff1100013e12b1f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff1100011a99a2ec FS: 00007fbd7086f740(0000) GS:ff1100013fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200071c0 CR3: 0000000118556004 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> proc_create_net_single+0x144/0x210 fs/proc/proc_net.c:220 bcm_connect+0x472/0x840 net/can/bcm.c:1673 __sys_connect_file net/socket.c:2049 [inline] __sys_connect+0x5d2/0x690 net/socket.c:2066 __do_sys_connect net/socket.c:2076 [inline] __se_sys_connect net/socket.c:2073 [inline] __x64_sys_connect+0x8f/0x100 net/socket.c:2073 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1c0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fbd708b0e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007fff8cd33f08 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fbd708b0e5d RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000040 R09: 0000000000000040 R10: 0000000000000040 R11: 0000000000000246 R12: 00007fff8cd34098 R13: 0000000000401280 R14: 0000000000406de8 R15: 00007fbd70ab9000 </TASK> remove_proc_entry: removing non-empty directory 'net/can-bcm', leaking at least '2456' |
| CVE-2024-46770 | In the Linux kernel, the following vulnerability has been resolved: ice: Add netif_device_attach/detach into PF reset flow Ethtool callbacks can be executed while reset is in progress and try to access deleted resources, e.g. getting coalesce settings can result in a NULL pointer dereference seen below. Reproduction steps: Once the driver is fully initialized, trigger reset: # echo 1 > /sys/class/net/<interface>/device/reset when reset is in progress try to get coalesce settings using ethtool: # ethtool -c <interface> BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 11 PID: 19713 Comm: ethtool Tainted: G S 6.10.0-rc7+ #7 RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice] RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206 RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000 R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40 FS: 00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0 Call Trace: <TASK> ice_get_coalesce+0x17/0x30 [ice] coalesce_prepare_data+0x61/0x80 ethnl_default_doit+0xde/0x340 genl_family_rcv_msg_doit+0xf2/0x150 genl_rcv_msg+0x1b3/0x2c0 netlink_rcv_skb+0x5b/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x19c/0x290 netlink_sendmsg+0x222/0x490 __sys_sendto+0x1df/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7faee60d8e27 Calling netif_device_detach() before reset makes the net core not call the driver when ethtool command is issued, the attempt to execute an ethtool command during reset will result in the following message: netlink error: No such device instead of NULL pointer dereference. Once reset is done and ice_rebuild() is executing, the netif_device_attach() is called to allow for ethtool operations to occur again in a safe manner. |
| CVE-2024-46769 | In the Linux kernel, the following vulnerability has been resolved: spi: intel: Add check devm_kasprintf() returned value intel_spi_populate_chip() use devm_kasprintf() to set pdata->name. This can return a NULL pointer on failure but this returned value is not checked. |
| CVE-2024-46768 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (hp-wmi-sensors) Check if WMI event data exists The BIOS can choose to return no event data in response to a WMI event, so the ACPI object passed to the WMI notify handler can be NULL. Check for such a situation and ignore the event in such a case. |
| CVE-2024-46767 | In the Linux kernel, the following vulnerability has been resolved: net: phy: Fix missing of_node_put() for leds The call of of_get_child_by_name() will cause refcount incremented for leds, if it succeeds, it should call of_node_put() to decrease it, fix it. |
| CVE-2024-46766 | In the Linux kernel, the following vulnerability has been resolved: ice: move netif_queue_set_napi to rtnl-protected sections Currently, netif_queue_set_napi() is called from ice_vsi_rebuild() that is not rtnl-locked when called from the reset. This creates the need to take the rtnl_lock just for a single function and complicates the synchronization with .ndo_bpf. At the same time, there no actual need to fill napi-to-queue information at this exact point. Fill napi-to-queue information when opening the VSI and clear it when the VSI is being closed. Those routines are already rtnl-locked. Also, rewrite napi-to-queue assignment in a way that prevents inclusion of XDP queues, as this leads to out-of-bounds writes, such as one below. [ +0.000004] BUG: KASAN: slab-out-of-bounds in netif_queue_set_napi+0x1c2/0x1e0 [ +0.000012] Write of size 8 at addr ffff889881727c80 by task bash/7047 [ +0.000006] CPU: 24 PID: 7047 Comm: bash Not tainted 6.10.0-rc2+ #2 [ +0.000004] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000003] Call Trace: [ +0.000003] <TASK> [ +0.000002] dump_stack_lvl+0x60/0x80 [ +0.000007] print_report+0xce/0x630 [ +0.000007] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ +0.000007] ? __virt_addr_valid+0x1c9/0x2c0 [ +0.000005] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000003] kasan_report+0xe9/0x120 [ +0.000004] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000004] netif_queue_set_napi+0x1c2/0x1e0 [ +0.000005] ice_vsi_close+0x161/0x670 [ice] [ +0.000114] ice_dis_vsi+0x22f/0x270 [ice] [ +0.000095] ice_pf_dis_all_vsi.constprop.0+0xae/0x1c0 [ice] [ +0.000086] ice_prepare_for_reset+0x299/0x750 [ice] [ +0.000087] pci_dev_save_and_disable+0x82/0xd0 [ +0.000006] pci_reset_function+0x12d/0x230 [ +0.000004] reset_store+0xa0/0x100 [ +0.000006] ? __pfx_reset_store+0x10/0x10 [ +0.000002] ? __pfx_mutex_lock+0x10/0x10 [ +0.000004] ? __check_object_size+0x4c1/0x640 [ +0.000007] kernfs_fop_write_iter+0x30b/0x4a0 [ +0.000006] vfs_write+0x5d6/0xdf0 [ +0.000005] ? fd_install+0x180/0x350 [ +0.000005] ? __pfx_vfs_write+0x10/0xA10 [ +0.000004] ? do_fcntl+0x52c/0xcd0 [ +0.000004] ? kasan_save_track+0x13/0x60 [ +0.000003] ? kasan_save_free_info+0x37/0x60 [ +0.000006] ksys_write+0xfa/0x1d0 [ +0.000003] ? __pfx_ksys_write+0x10/0x10 [ +0.000002] ? __x64_sys_fcntl+0x121/0x180 [ +0.000004] ? _raw_spin_lock+0x87/0xe0 [ +0.000005] do_syscall_64+0x80/0x170 [ +0.000007] ? _raw_spin_lock+0x87/0xe0 [ +0.000004] ? __pfx__raw_spin_lock+0x10/0x10 [ +0.000003] ? file_close_fd_locked+0x167/0x230 [ +0.000005] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000005] ? do_syscall_64+0x8c/0x170 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? fput+0x1a/0x2c0 [ +0.000004] ? filp_close+0x19/0x30 [ +0.000004] ? do_dup2+0x25a/0x4c0 [ +0.000004] ? __x64_sys_dup2+0x6e/0x2e0 [ +0.000002] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? __count_memcg_events+0x113/0x380 [ +0.000005] ? handle_mm_fault+0x136/0x820 [ +0.000005] ? do_user_addr_fault+0x444/0xa80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000002] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000005] RIP: 0033:0x7f2033593154 |
| CVE-2024-46765 | In the Linux kernel, the following vulnerability has been resolved: ice: protect XDP configuration with a mutex The main threat to data consistency in ice_xdp() is a possible asynchronous PF reset. It can be triggered by a user or by TX timeout handler. XDP setup and PF reset code access the same resources in the following sections: * ice_vsi_close() in ice_prepare_for_reset() - already rtnl-locked * ice_vsi_rebuild() for the PF VSI - not protected * ice_vsi_open() - already rtnl-locked With an unfortunate timing, such accesses can result in a crash such as the one below: [ +1.999878] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 14 [ +2.002992] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 18 [Mar15 18:17] ice 0000:b1:00.0 ens801f0np0: NETDEV WATCHDOG: CPU: 38: transmit queue 14 timed out 80692736 ms [ +0.000093] ice 0000:b1:00.0 ens801f0np0: tx_timeout: VSI_num: 6, Q 14, NTC: 0x0, HW_HEAD: 0x0, NTU: 0x0, INT: 0x4000001 [ +0.000012] ice 0000:b1:00.0 ens801f0np0: tx_timeout recovery level 1, txqueue 14 [ +0.394718] ice 0000:b1:00.0: PTP reset successful [ +0.006184] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ +0.000045] #PF: supervisor read access in kernel mode [ +0.000023] #PF: error_code(0x0000) - not-present page [ +0.000023] PGD 0 P4D 0 [ +0.000018] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000023] CPU: 38 PID: 7540 Comm: kworker/38:1 Not tainted 6.8.0-rc7 #1 [ +0.000031] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000036] Workqueue: ice ice_service_task [ice] [ +0.000183] RIP: 0010:ice_clean_tx_ring+0xa/0xd0 [ice] [...] [ +0.000013] Call Trace: [ +0.000016] <TASK> [ +0.000014] ? __die+0x1f/0x70 [ +0.000029] ? page_fault_oops+0x171/0x4f0 [ +0.000029] ? schedule+0x3b/0xd0 [ +0.000027] ? exc_page_fault+0x7b/0x180 [ +0.000022] ? asm_exc_page_fault+0x22/0x30 [ +0.000031] ? ice_clean_tx_ring+0xa/0xd0 [ice] [ +0.000194] ice_free_tx_ring+0xe/0x60 [ice] [ +0.000186] ice_destroy_xdp_rings+0x157/0x310 [ice] [ +0.000151] ice_vsi_decfg+0x53/0xe0 [ice] [ +0.000180] ice_vsi_rebuild+0x239/0x540 [ice] [ +0.000186] ice_vsi_rebuild_by_type+0x76/0x180 [ice] [ +0.000145] ice_rebuild+0x18c/0x840 [ice] [ +0.000145] ? delay_tsc+0x4a/0xc0 [ +0.000022] ? delay_tsc+0x92/0xc0 [ +0.000020] ice_do_reset+0x140/0x180 [ice] [ +0.000886] ice_service_task+0x404/0x1030 [ice] [ +0.000824] process_one_work+0x171/0x340 [ +0.000685] worker_thread+0x277/0x3a0 [ +0.000675] ? preempt_count_add+0x6a/0xa0 [ +0.000677] ? _raw_spin_lock_irqsave+0x23/0x50 [ +0.000679] ? __pfx_worker_thread+0x10/0x10 [ +0.000653] kthread+0xf0/0x120 [ +0.000635] ? __pfx_kthread+0x10/0x10 [ +0.000616] ret_from_fork+0x2d/0x50 [ +0.000612] ? __pfx_kthread+0x10/0x10 [ +0.000604] ret_from_fork_asm+0x1b/0x30 [ +0.000604] </TASK> The previous way of handling this through returning -EBUSY is not viable, particularly when destroying AF_XDP socket, because the kernel proceeds with removal anyway. There is plenty of code between those calls and there is no need to create a large critical section that covers all of them, same as there is no need to protect ice_vsi_rebuild() with rtnl_lock(). Add xdp_state_lock mutex to protect ice_vsi_rebuild() and ice_xdp(). Leaving unprotected sections in between would result in two states that have to be considered: 1. when the VSI is closed, but not yet rebuild 2. when VSI is already rebuild, but not yet open The latter case is actually already handled through !netif_running() case, we just need to adjust flag checking a little. The former one is not as trivial, because between ice_vsi_close() and ice_vsi_rebuild(), a lot of hardware interaction happens, this can make adding/deleting rings exit with an error. Luckily, VSI rebuild is pending and can apply new configuration for us in a managed fashion. Therefore, add an additional VSI state flag ICE_VSI_REBUILD_PENDING to indicate that ice_x ---truncated--- |
| CVE-2024-46764 | In the Linux kernel, the following vulnerability has been resolved: bpf: add check for invalid name in btf_name_valid_section() If the length of the name string is 1 and the value of name[0] is NULL byte, an OOB vulnerability occurs in btf_name_valid_section() and the return value is true, so the invalid name passes the check. To solve this, you need to check if the first position is NULL byte and if the first character is printable. |
| CVE-2024-46763 | In the Linux kernel, the following vulnerability has been resolved: fou: Fix null-ptr-deref in GRO. We observed a null-ptr-deref in fou_gro_receive() while shutting down a host. [0] The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol in struct fou. When fou_release() is called due to netns dismantle or explicit tunnel teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data. Then, the tunnel socket is destroyed after a single RCU grace period. So, in-flight udp4_gro_receive() could find the socket and execute the FOU GRO handler, where sk->sk_user_data could be NULL. Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL checks in FOU GRO handlers. [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0 SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1 Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017 RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou] Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42 RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010 RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08 RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002 R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400 R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0 FS: 0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? no_context (arch/x86/mm/fault.c:752) ? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483) ? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571) ? fou_gro_receive (net/ipv4/fou.c:233) [fou] udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559) udp4_gro_receive (net/ipv4/udp_offload.c:604) inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7)) dev_gro_receive (net/core/dev.c:6035 (discriminator 4)) napi_gro_receive (net/core/dev.c:6170) ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena] ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena] napi_poll (net/core/dev.c:6847) net_rx_action (net/core/dev.c:6917) __do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299) asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809) </IRQ> do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77) irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435) common_interrupt (arch/x86/kernel/irq.c:239) asm_common_interrupt (arch/x86/include/asm/idtentry.h:626) RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575) Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 <fa> c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246 RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900 RDX: ffff93daee800000 RSI: ffff93d ---truncated--- |
| CVE-2024-46762 | In the Linux kernel, the following vulnerability has been resolved: xen: privcmd: Fix possible access to a freed kirqfd instance Nothing prevents simultaneous ioctl calls to privcmd_irqfd_assign() and privcmd_irqfd_deassign(). If that happens, it is possible that a kirqfd created and added to the irqfds_list by privcmd_irqfd_assign() may get removed by another thread executing privcmd_irqfd_deassign(), while the former is still using it after dropping the locks. This can lead to a situation where an already freed kirqfd instance may be accessed and cause kernel oops. Use SRCU locking to prevent the same, as is done for the KVM implementation for irqfds. |
| CVE-2024-46761 | In the Linux kernel, the following vulnerability has been resolved: pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv The hotplug driver for powerpc (pci/hotplug/pnv_php.c) causes a kernel crash when we try to hot-unplug/disable the PCIe switch/bridge from the PHB. The crash occurs because although the MSI data structure has been released during disable/hot-unplug path and it has been assigned with NULL, still during unregistration the code was again trying to explicitly disable the MSI which causes the NULL pointer dereference and kernel crash. The patch fixes the check during unregistration path to prevent invoking pci_disable_msi/msix() since its data structure is already freed. |
| CVE-2024-46760 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: schedule rx work after everything is set up Right now it's possible to hit NULL pointer dereference in rtw_rx_fill_rx_status on hw object and/or its fields because initialization routine can start getting USB replies before rtw_dev is fully setup. The stack trace looks like this: rtw_rx_fill_rx_status rtw8821c_query_rx_desc rtw_usb_rx_handler ... queue_work rtw_usb_read_port_complete ... usb_submit_urb rtw_usb_rx_resubmit rtw_usb_init_rx rtw_usb_probe So while we do the async stuff rtw_usb_probe continues and calls rtw_register_hw, which does all kinds of initialization (e.g. via ieee80211_register_hw) that rtw_rx_fill_rx_status relies on. Fix this by moving the first usb_submit_urb after everything is set up. For me, this bug manifested as: [ 8.893177] rtw_8821cu 1-1:1.2: band wrong, packet dropped [ 8.910904] rtw_8821cu 1-1:1.2: hw->conf.chandef.chan NULL in rtw_rx_fill_rx_status because I'm using Larry's backport of rtw88 driver with the NULL checks in rtw_rx_fill_rx_status. |
| CVE-2024-46759 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (adc128d818) Fix underflows seen when writing limit attributes DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large negative number such as -9223372036854775808 is provided by the user. Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations. |
| CVE-2024-46758 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm95234) Fix underflows seen when writing limit attributes DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large negative number such as -9223372036854775808 is provided by the user. Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations. |
| CVE-2024-46757 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Fix underflows seen when writing limit attributes DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large negative number such as -9223372036854775808 is provided by the user. Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations. |
| CVE-2024-46756 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83627ehf) Fix underflows seen when writing limit attributes DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large negative number such as -9223372036854775808 is provided by the user. Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations. |
| CVE-2024-46755 | In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Do not return unused priv in mwifiex_get_priv_by_id() mwifiex_get_priv_by_id() returns the priv pointer corresponding to the bss_num and bss_type, but without checking if the priv is actually currently in use. Unused priv pointers do not have a wiphy attached to them which can lead to NULL pointer dereferences further down the callstack. Fix this by returning only used priv pointers which have priv->bss_mode set to something else than NL80211_IFTYPE_UNSPECIFIED. Said NULL pointer dereference happened when an Accesspoint was started with wpa_supplicant -i mlan0 with this config: network={ ssid="somessid" mode=2 frequency=2412 key_mgmt=WPA-PSK WPA-PSK-SHA256 proto=RSN group=CCMP pairwise=CCMP psk="12345678" } When waiting for the AP to be established, interrupting wpa_supplicant with <ctrl-c> and starting it again this happens: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000140 | Mem abort info: | ESR = 0x0000000096000004 | EC = 0x25: DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | Data abort info: | ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 | CM = 0, WnR = 0, TnD = 0, TagAccess = 0 | GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000046d96000 | [0000000000000140] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP | Modules linked in: caam_jr caamhash_desc spidev caamalg_desc crypto_engine authenc libdes mwifiex_sdio +mwifiex crct10dif_ce cdc_acm onboard_usb_hub fsl_imx8_ddr_perf imx8m_ddrc rtc_ds1307 lm75 rtc_snvs +imx_sdma caam imx8mm_thermal spi_imx error imx_cpufreq_dt fuse ip_tables x_tables ipv6 | CPU: 0 PID: 8 Comm: kworker/0:1 Not tainted 6.9.0-00007-g937242013fce-dirty #18 | Hardware name: somemachine (DT) | Workqueue: events sdio_irq_work | pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : mwifiex_get_cfp+0xd8/0x15c [mwifiex] | lr : mwifiex_get_cfp+0x34/0x15c [mwifiex] | sp : ffff8000818b3a70 | x29: ffff8000818b3a70 x28: ffff000006bfd8a5 x27: 0000000000000004 | x26: 000000000000002c x25: 0000000000001511 x24: 0000000002e86bc9 | x23: ffff000006bfd996 x22: 0000000000000004 x21: ffff000007bec000 | x20: 000000000000002c x19: 0000000000000000 x18: 0000000000000000 | x17: 000000040044ffff x16: 00500072b5503510 x15: ccc283740681e517 | x14: 0201000101006d15 x13: 0000000002e8ff43 x12: 002c01000000ffb1 | x11: 0100000000000000 x10: 02e8ff43002c0100 x9 : 0000ffb100100157 | x8 : ffff000003d20000 x7 : 00000000000002f1 x6 : 00000000ffffe124 | x5 : 0000000000000001 x4 : 0000000000000003 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : 0001000000011001 x0 : 0000000000000000 | Call trace: | mwifiex_get_cfp+0xd8/0x15c [mwifiex] | mwifiex_parse_single_response_buf+0x1d0/0x504 [mwifiex] | mwifiex_handle_event_ext_scan_report+0x19c/0x2f8 [mwifiex] | mwifiex_process_sta_event+0x298/0xf0c [mwifiex] | mwifiex_process_event+0x110/0x238 [mwifiex] | mwifiex_main_process+0x428/0xa44 [mwifiex] | mwifiex_sdio_interrupt+0x64/0x12c [mwifiex_sdio] | process_sdio_pending_irqs+0x64/0x1b8 | sdio_irq_work+0x4c/0x7c | process_one_work+0x148/0x2a0 | worker_thread+0x2fc/0x40c | kthread+0x110/0x114 | ret_from_fork+0x10/0x20 | Code: a94153f3 a8c37bfd d50323bf d65f03c0 (f940a000) | ---[ end trace 0000000000000000 ]--- |
| CVE-2024-46754 | In the Linux kernel, the following vulnerability has been resolved: bpf: Remove tst_run from lwt_seg6local_prog_ops. The syzbot reported that the lwt_seg6 related BPF ops can be invoked via bpf_test_run() without without entering input_action_end_bpf() first. Martin KaFai Lau said that self test for BPF_PROG_TYPE_LWT_SEG6LOCAL probably didn't work since it was introduced in commit 04d4b274e2a ("ipv6: sr: Add seg6local action End.BPF"). The reason is that the per-CPU variable seg6_bpf_srh_states::srh is never assigned in the self test case but each BPF function expects it. Remove test_run for BPF_PROG_TYPE_LWT_SEG6LOCAL. |
| CVE-2024-46753 | In the Linux kernel, the following vulnerability has been resolved: btrfs: handle errors from btrfs_dec_ref() properly In walk_up_proc() we BUG_ON(ret) from btrfs_dec_ref(). This is incorrect, we have proper error handling here, return the error. |
| CVE-2024-46752 | In the Linux kernel, the following vulnerability has been resolved: btrfs: replace BUG_ON() with error handling at update_ref_for_cow() Instead of a BUG_ON() just return an error, log an error message and abort the transaction in case we find an extent buffer belonging to the relocation tree that doesn't have the full backref flag set. This is unexpected and should never happen (save for bugs or a potential bad memory). |
| CVE-2024-46751 | In the Linux kernel, the following vulnerability has been resolved: btrfs: don't BUG_ON() when 0 reference count at btrfs_lookup_extent_info() Instead of doing a BUG_ON() handle the error by returning -EUCLEAN, aborting the transaction and logging an error message. |
| CVE-2024-46750 | In the Linux kernel, the following vulnerability has been resolved: PCI: Add missing bridge lock to pci_bus_lock() One of the true positives that the cfg_access_lock lockdep effort identified is this sequence: WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70 RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70 Call Trace: <TASK> ? __warn+0x8c/0x190 ? pci_bridge_secondary_bus_reset+0x5d/0x70 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? pci_bridge_secondary_bus_reset+0x5d/0x70 pci_reset_bus+0x1d8/0x270 vmd_probe+0x778/0xa10 pci_device_probe+0x95/0x120 Where pci_reset_bus() users are triggering unlocked secondary bus resets. Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses pci_bus_lock() before issuing the reset which locks everything *but* the bridge itself. For the same motivation as adding: bridge = pci_upstream_bridge(dev); if (bridge) pci_dev_lock(bridge); to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add pci_dev_lock() for @bus->self to pci_bus_lock(). [bhelgaas: squash in recursive locking deadlock fix from Keith Busch: https://lore.kernel.org/r/[email protected]] |
| CVE-2024-46749 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix Null pointer dereference in btnxpuart_flush() This adds a check before freeing the rx->skb in flush and close functions to handle the kernel crash seen while removing driver after FW download fails or before FW download completes. dmesg log: [ 54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 54.643398] Mem abort info: [ 54.646204] ESR = 0x0000000096000004 [ 54.649964] EC = 0x25: DABT (current EL), IL = 32 bits [ 54.655286] SET = 0, FnV = 0 [ 54.658348] EA = 0, S1PTW = 0 [ 54.661498] FSC = 0x04: level 0 translation fault [ 54.666391] Data abort info: [ 54.669273] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 54.674768] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 54.674771] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000 [ 54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000 [ 54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse [ 54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2 [ 54.744364] Hardware name: FSL i.MX8MM EVK board (DT) [ 54.744368] Workqueue: hci0 hci_power_on [ 54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 54.757249] pc : kfree_skb_reason+0x18/0xb0 [ 54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.782921] sp : ffff8000805ebca0 [ 54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000 [ 54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230 [ 54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92 [ 54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff [ 54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857 [ 54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642 [ 54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688 [ 54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000 [ 54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac [ 54.857599] Call trace: [ 54.857601] kfree_skb_reason+0x18/0xb0 [ 54.863878] btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.863888] hci_dev_open_sync+0x3a8/0xa04 [ 54.872773] hci_power_on+0x54/0x2e4 [ 54.881832] process_one_work+0x138/0x260 [ 54.881842] worker_thread+0x32c/0x438 [ 54.881847] kthread+0x118/0x11c [ 54.881853] ret_from_fork+0x10/0x20 [ 54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400) [ 54.896410] ---[ end trace 0000000000000000 ]--- |
| CVE-2024-46748 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: Set the max subreq size for cache writes to MAX_RW_COUNT Set the maximum size of a subrequest that writes to cachefiles to be MAX_RW_COUNT so that we don't overrun the maximum write we can make to the backing filesystem. |
| CVE-2024-46747 | In the Linux kernel, the following vulnerability has been resolved: HID: cougar: fix slab-out-of-bounds Read in cougar_report_fixup report_fixup for the Cougar 500k Gaming Keyboard was not verifying that the report descriptor size was correct before accessing it |
| CVE-2024-46746 | In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: free driver_data after destroying hid device HID driver callbacks aren't called anymore once hid_destroy_device() has been called. Hence, hid driver_data should be freed only after the hid_destroy_device() function returned as driver_data is used in several callbacks. I observed a crash with kernel 6.10.0 on my T14s Gen 3, after enabling KASAN to debug memory allocation, I got this output: [ 13.050438] ================================================================== [ 13.054060] BUG: KASAN: slab-use-after-free in amd_sfh_get_report+0x3ec/0x530 [amd_sfh] [ 13.054809] psmouse serio1: trackpoint: Synaptics TrackPoint firmware: 0x02, buttons: 3/3 [ 13.056432] Read of size 8 at addr ffff88813152f408 by task (udev-worker)/479 [ 13.060970] CPU: 5 PID: 479 Comm: (udev-worker) Not tainted 6.10.0-arch1-2 #1 893bb55d7f0073f25c46adbb49eb3785fefd74b0 [ 13.063978] Hardware name: LENOVO 21CQCTO1WW/21CQCTO1WW, BIOS R22ET70W (1.40 ) 03/21/2024 [ 13.067860] Call Trace: [ 13.069383] input: TPPS/2 Synaptics TrackPoint as /devices/platform/i8042/serio1/input/input8 [ 13.071486] <TASK> [ 13.071492] dump_stack_lvl+0x5d/0x80 [ 13.074870] snd_hda_intel 0000:33:00.6: enabling device (0000 -> 0002) [ 13.078296] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.082199] print_report+0x174/0x505 [ 13.085776] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 13.089367] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.093255] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.097464] kasan_report+0xc8/0x150 [ 13.101461] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.105802] amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.110303] amdtp_hid_request+0xb8/0x110 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.114879] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.119450] sensor_hub_get_feature+0x1d3/0x540 [hid_sensor_hub 3f13be3016ff415bea03008d45d99da837ee3082] [ 13.124097] hid_sensor_parse_common_attributes+0x4d0/0xad0 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5] [ 13.127404] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.131925] ? __pfx_hid_sensor_parse_common_attributes+0x10/0x10 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5] [ 13.136455] ? _raw_spin_lock_irqsave+0x96/0xf0 [ 13.140197] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 13.143602] ? devm_iio_device_alloc+0x34/0x50 [industrialio 3d261d5e5765625d2b052be40e526d62b1d2123b] [ 13.147234] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.150446] ? __devm_add_action+0x167/0x1d0 [ 13.155061] hid_gyro_3d_probe+0x120/0x7f0 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172] [ 13.158581] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.161814] platform_probe+0xa2/0x150 [ 13.165029] really_probe+0x1e3/0x8a0 [ 13.168243] __driver_probe_device+0x18c/0x370 [ 13.171500] driver_probe_device+0x4a/0x120 [ 13.175000] __driver_attach+0x190/0x4a0 [ 13.178521] ? __pfx___driver_attach+0x10/0x10 [ 13.181771] bus_for_each_dev+0x106/0x180 [ 13.185033] ? __pfx__raw_spin_lock+0x10/0x10 [ 13.188229] ? __pfx_bus_for_each_dev+0x10/0x10 [ 13.191446] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.194382] bus_add_driver+0x29e/0x4d0 [ 13.197328] driver_register+0x1a5/0x360 [ 13.200283] ? __pfx_hid_gyro_3d_platform_driver_init+0x10/0x10 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172] [ 13.203362] do_one_initcall+0xa7/0x380 [ 13.206432] ? __pfx_do_one_initcall+0x10/0x10 [ 13.210175] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.213211] ? kasan_unpoison+0x44/0x70 [ 13.216688] do_init_module+0x238/0x750 [ 13.2196 ---truncated--- |
| CVE-2024-46745 | In the Linux kernel, the following vulnerability has been resolved: Input: uinput - reject requests with unreasonable number of slots When exercising uinput interface syzkaller may try setting up device with a really large number of slots, which causes memory allocation failure in input_mt_init_slots(). While this allocation failure is handled properly and request is rejected, it results in syzkaller reports. Additionally, such request may put undue burden on the system which will try to free a lot of memory for a bogus request. Fix it by limiting allowed number of slots to 100. This can easily be extended if we see devices that can track more than 100 contacts. |
| CVE-2024-46744 | In the Linux kernel, the following vulnerability has been resolved: Squashfs: sanity check symbolic link size Syzkiller reports a "KMSAN: uninit-value in pick_link" bug. This is caused by an uninitialised page, which is ultimately caused by a corrupted symbolic link size read from disk. The reason why the corrupted symlink size causes an uninitialised page is due to the following sequence of events: 1. squashfs_read_inode() is called to read the symbolic link from disk. This assigns the corrupted value 3875536935 to inode->i_size. 2. Later squashfs_symlink_read_folio() is called, which assigns this corrupted value to the length variable, which being a signed int, overflows producing a negative number. 3. The following loop that fills in the page contents checks that the copied bytes is less than length, which being negative means the loop is skipped, producing an uninitialised page. This patch adds a sanity check which checks that the symbolic link size is not larger than expected. -- V2: fix spelling mistake. |
| CVE-2024-46743 | In the Linux kernel, the following vulnerability has been resolved: of/irq: Prevent device address out-of-bounds read in interrupt map walk When of_irq_parse_raw() is invoked with a device address smaller than the interrupt parent node (from #address-cells property), KASAN detects the following out-of-bounds read when populating the initial match table (dyndbg="func of_irq_parse_* +p"): OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0 OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2 OF: intspec=4 OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2 OF: -> addrsize=3 ================================================================== BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0 Read of size 4 at addr ffffff81beca5608 by task bash/764 CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1 Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023 Call trace: dump_backtrace+0xdc/0x130 show_stack+0x1c/0x30 dump_stack_lvl+0x6c/0x84 print_report+0x150/0x448 kasan_report+0x98/0x140 __asan_load4+0x78/0xa0 of_irq_parse_raw+0x2b8/0x8d0 of_irq_parse_one+0x24c/0x270 parse_interrupts+0xc0/0x120 of_fwnode_add_links+0x100/0x2d0 fw_devlink_parse_fwtree+0x64/0xc0 device_add+0xb38/0xc30 of_device_add+0x64/0x90 of_platform_device_create_pdata+0xd0/0x170 of_platform_bus_create+0x244/0x600 of_platform_notify+0x1b0/0x254 blocking_notifier_call_chain+0x9c/0xd0 __of_changeset_entry_notify+0x1b8/0x230 __of_changeset_apply_notify+0x54/0xe4 of_overlay_fdt_apply+0xc04/0xd94 ... The buggy address belongs to the object at ffffff81beca5600 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 8 bytes inside of 128-byte region [ffffff81beca5600, ffffff81beca5680) The buggy address belongs to the physical page: page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4 head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x8000000000010200(slab|head|zone=2) raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc ================================================================== OF: -> got it ! Prevent the out-of-bounds read by copying the device address into a buffer of sufficient size. |
| CVE-2024-46742 | In the Linux kernel, the following vulnerability has been resolved: smb/server: fix potential null-ptr-deref of lease_ctx_info in smb2_open() null-ptr-deref will occur when (req_op_level == SMB2_OPLOCK_LEVEL_LEASE) and parse_lease_state() return NULL. Fix this by check if 'lease_ctx_info' is NULL. Additionally, remove the redundant parentheses in parse_durable_handle_context(). |
| CVE-2024-46741 | In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix double free of 'buf' in error path smatch warning: drivers/misc/fastrpc.c:1926 fastrpc_req_mmap() error: double free of 'buf' In fastrpc_req_mmap() error path, the fastrpc buffer is freed in fastrpc_req_munmap_impl() if unmap is successful. But in the end, there is an unconditional call to fastrpc_buf_free(). So the above case triggers the double free of fastrpc buf. |
| CVE-2024-46740 | In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF caused by offsets overwrite Binder objects are processed and copied individually into the target buffer during transactions. Any raw data in-between these objects is copied as well. However, this raw data copy lacks an out-of-bounds check. If the raw data exceeds the data section size then the copy overwrites the offsets section. This eventually triggers an error that attempts to unwind the processed objects. However, at this point the offsets used to index these objects are now corrupted. Unwinding with corrupted offsets can result in decrements of arbitrary nodes and lead to their premature release. Other users of such nodes are left with a dangling pointer triggering a use-after-free. This issue is made evident by the following KASAN report (trimmed): ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c Write of size 4 at addr ffff47fc91598f04 by task binder-util/743 CPU: 9 UID: 0 PID: 743 Comm: binder-util Not tainted 6.11.0-rc4 #1 Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x19c binder_free_buf+0x128/0x434 binder_thread_write+0x8a4/0x3260 binder_ioctl+0x18f0/0x258c [...] Allocated by task 743: __kmalloc_cache_noprof+0x110/0x270 binder_new_node+0x50/0x700 binder_transaction+0x413c/0x6da8 binder_thread_write+0x978/0x3260 binder_ioctl+0x18f0/0x258c [...] Freed by task 745: kfree+0xbc/0x208 binder_thread_read+0x1c5c/0x37d4 binder_ioctl+0x16d8/0x258c [...] ================================================================== To avoid this issue, let's check that the raw data copy is within the boundaries of the data section. |
| CVE-2024-46739 | In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind For primary VM Bus channels, primary_channel pointer is always NULL. This pointer is valid only for the secondary channels. Also, rescind callback is meant for primary channels only. Fix NULL pointer dereference by retrieving the device_obj from the parent for the primary channel. |
| CVE-2024-46738 | In the Linux kernel, the following vulnerability has been resolved: VMCI: Fix use-after-free when removing resource in vmci_resource_remove() When removing a resource from vmci_resource_table in vmci_resource_remove(), the search is performed using the resource handle by comparing context and resource fields. It is possible though to create two resources with different types but same handle (same context and resource fields). When trying to remove one of the resources, vmci_resource_remove() may not remove the intended one, but the object will still be freed as in the case of the datagram type in vmci_datagram_destroy_handle(). vmci_resource_table will still hold a pointer to this freed resource leading to a use-after-free vulnerability. BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239 __kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425 kasan_report+0x38/0x51 mm/kasan/report.c:442 vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182 ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444 kref_put include/linux/kref.h:65 [inline] vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline] vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195 vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143 __fput+0x261/0xa34 fs/file_table.c:282 task_work_run+0xf0/0x194 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187 exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220 __syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline] syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313 do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0x0 This change ensures the type is also checked when removing the resource from vmci_resource_table in vmci_resource_remove(). |
| CVE-2024-46737 | In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix kernel crash if commands allocation fails If the commands allocation fails in nvmet_tcp_alloc_cmds() the kernel crashes in nvmet_tcp_release_queue_work() because of a NULL pointer dereference. nvmet: failed to install queue 0 cntlid 1 ret 6 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Fix the bug by setting queue->nr_cmds to zero in case nvmet_tcp_alloc_cmd() fails. |
| CVE-2024-46736 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double put of @cfile in smb2_rename_path() If smb2_set_path_attr() is called with a valid @cfile and returned -EINVAL, we need to call cifs_get_writable_path() again as the reference of @cfile was already dropped by previous smb2_compound_op() call. |
| CVE-2024-46735 | In the Linux kernel, the following vulnerability has been resolved: ublk_drv: fix NULL pointer dereference in ublk_ctrl_start_recovery() When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference issue. Fix it by adding the check in ublk_ctrl_start_recovery() and return immediately in case of zero 'ub->nr_queues_ready'. BUG: kernel NULL pointer dereference, address: 0000000000000028 RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x75/0x170 ? exc_page_fault+0x64/0x140 ? asm_exc_page_fault+0x22/0x30 ? ublk_ctrl_start_recovery.constprop.0+0x82/0x180 ublk_ctrl_uring_cmd+0x4f7/0x6c0 ? pick_next_task_idle+0x26/0x40 io_uring_cmd+0x9a/0x1b0 io_issue_sqe+0x193/0x3f0 io_wq_submit_work+0x9b/0x390 io_worker_handle_work+0x165/0x360 io_wq_worker+0xcb/0x2f0 ? finish_task_switch.isra.0+0x203/0x290 ? finish_task_switch.isra.0+0x203/0x290 ? __pfx_io_wq_worker+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_io_wq_worker+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> |
| CVE-2024-46734 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between direct IO write and fsync when using same fd If we have 2 threads that are using the same file descriptor and one of them is doing direct IO writes while the other is doing fsync, we have a race where we can end up either: 1) Attempt a fsync without holding the inode's lock, triggering an assertion failures when assertions are enabled; 2) Do an invalid memory access from the fsync task because the file private points to memory allocated on stack by the direct IO task and it may be used by the fsync task after the stack was destroyed. The race happens like this: 1) A user space program opens a file descriptor with O_DIRECT; 2) The program spawns 2 threads using libpthread for example; 3) One of the threads uses the file descriptor to do direct IO writes, while the other calls fsync using the same file descriptor. 4) Call task A the thread doing direct IO writes and task B the thread doing fsyncs; 5) Task A does a direct IO write, and at btrfs_direct_write() sets the file's private to an on stack allocated private with the member 'fsync_skip_inode_lock' set to true; 6) Task B enters btrfs_sync_file() and sees that there's a private structure associated to the file which has 'fsync_skip_inode_lock' set to true, so it skips locking the inode's VFS lock; 7) Task A completes the direct IO write, and resets the file's private to NULL since it had no prior private and our private was stack allocated. Then it unlocks the inode's VFS lock; 8) Task B enters btrfs_get_ordered_extents_for_logging(), then the assertion that checks the inode's VFS lock is held fails, since task B never locked it and task A has already unlocked it. The stack trace produced is the following: assertion failed: inode_is_locked(&inode->vfs_inode), in fs/btrfs/ordered-data.c:983 ------------[ cut here ]------------ kernel BUG at fs/btrfs/ordered-data.c:983! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 9 PID: 5072 Comm: worker Tainted: G U OE 6.10.5-1-default #1 openSUSE Tumbleweed 69f48d427608e1c09e60ea24c6c55e2ca1b049e8 Hardware name: Acer Predator PH315-52/Covini_CFS, BIOS V1.12 07/28/2020 RIP: 0010:btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs] Code: 50 d6 86 c0 e8 (...) RSP: 0018:ffff9e4a03dcfc78 EFLAGS: 00010246 RAX: 0000000000000054 RBX: ffff9078a9868e98 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff907dce4a7800 RDI: ffff907dce4a7800 RBP: ffff907805518800 R08: 0000000000000000 R09: ffff9e4a03dcfb38 R10: ffff9e4a03dcfb30 R11: 0000000000000003 R12: ffff907684ae7800 R13: 0000000000000001 R14: ffff90774646b600 R15: 0000000000000000 FS: 00007f04b96006c0(0000) GS:ffff907dce480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f32acbfc000 CR3: 00000001fd4fa005 CR4: 00000000003726f0 Call Trace: <TASK> ? __die_body.cold+0x14/0x24 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x6a/0x90 ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] ? exc_invalid_op+0x50/0x70 ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] ? asm_exc_invalid_op+0x1a/0x20 ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] btrfs_sync_file+0x21a/0x4d0 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] ? __seccomp_filter+0x31d/0x4f0 __x64_sys_fdatasync+0x4f/0x90 do_syscall_64+0x82/0x160 ? do_futex+0xcb/0x190 ? __x64_sys_futex+0x10e/0x1d0 ? switch_fpu_return+0x4f/0xd0 ? syscall_exit_to_user_mode+0x72/0x220 ? do_syscall_64+0x8e/0x160 ? syscall_exit_to_user_mod ---truncated--- |
| CVE-2024-46733 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix qgroup reserve leaks in cow_file_range In the buffered write path, the dirty page owns the qgroup reserve until it creates an ordered_extent. Therefore, any errors that occur before the ordered_extent is created must free that reservation, or else the space is leaked. The fstest generic/475 exercises various IO error paths, and is able to trigger errors in cow_file_range where we fail to get to allocating the ordered extent. Note that because we *do* clear delalloc, we are likely to remove the inode from the delalloc list, so the inodes/pages to not have invalidate/launder called on them in the commit abort path. This results in failures at the unmount stage of the test that look like: BTRFS: error (device dm-8 state EA) in cleanup_transaction:2018: errno=-5 IO failure BTRFS: error (device dm-8 state EA) in btrfs_replace_file_extents:2416: errno=-5 IO failure BTRFS warning (device dm-8 state EA): qgroup 0/5 has unreleased space, type 0 rsv 28672 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 22588 at fs/btrfs/disk-io.c:4333 close_ctree+0x222/0x4d0 [btrfs] Modules linked in: btrfs blake2b_generic libcrc32c xor zstd_compress raid6_pq CPU: 3 PID: 22588 Comm: umount Kdump: loaded Tainted: G W 6.10.0-rc7-gab56fde445b8 #21 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:close_ctree+0x222/0x4d0 [btrfs] RSP: 0018:ffffb4465283be00 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffffa1a1818e1000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffb4465283bbe0 RDI: ffffa1a19374fcb8 RBP: ffffa1a1818e13c0 R08: 0000000100028b16 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000003 R12: ffffa1a18ad7972c R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f9168312b80(0000) GS:ffffa1a4afcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f91683c9140 CR3: 000000010acaa000 CR4: 00000000000006f0 Call Trace: <TASK> ? close_ctree+0x222/0x4d0 [btrfs] ? __warn.cold+0x8e/0xea ? close_ctree+0x222/0x4d0 [btrfs] ? report_bug+0xff/0x140 ? handle_bug+0x3b/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? close_ctree+0x222/0x4d0 [btrfs] generic_shutdown_super+0x70/0x160 kill_anon_super+0x11/0x40 btrfs_kill_super+0x11/0x20 [btrfs] deactivate_locked_super+0x2e/0xa0 cleanup_mnt+0xb5/0x150 task_work_run+0x57/0x80 syscall_exit_to_user_mode+0x121/0x130 do_syscall_64+0xab/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f916847a887 ---[ end trace 0000000000000000 ]--- BTRFS error (device dm-8 state EA): qgroup reserved space leaked Cases 2 and 3 in the out_reserve path both pertain to this type of leak and must free the reserved qgroup data. Because it is already an error path, I opted not to handle the possible errors in btrfs_free_qgroup_data. |
| CVE-2024-46732 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Assign linear_pitch_alignment even for VM [Description] Assign linear_pitch_alignment so we don't cause a divide by 0 error in VM environments |
| CVE-2024-46731 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix the Out-of-bounds read warning using index i - 1U may beyond element index for mc_data[] when i = 0. |
| CVE-2024-46730 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Ensure array index tg_inst won't be -1 [WHY & HOW] tg_inst will be a negative if timing_generator_count equals 0, which should be checked before used. This fixes 2 OVERRUN issues reported by Coverity. |
| CVE-2024-46729 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix incorrect size calculation for loop [WHY] fe_clk_en has size of 5 but sizeof(fe_clk_en) has byte size 20 which is lager than the array size. [HOW] Divide byte size 20 by its element size. This fixes 2 OVERRUN issues reported by Coverity. |
| CVE-2024-46728 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check index for aux_rd_interval before using aux_rd_interval has size of 7 and should be checked. This fixes 3 OVERRUN and 1 INTEGER_OVERFLOW issues reported by Coverity. |
| CVE-2024-46727 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add otg_master NULL check within resource_log_pipe_topology_update [Why] Coverity reports NULL_RETURN warning. [How] Add otg_master NULL check. |
| CVE-2024-46726 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Ensure index calculation will not overflow [WHY & HOW] Make sure vmid0p72_idx, vnom0p8_idx and vmax0p9_idx calculation will never overflow and exceess array size. This fixes 3 OVERRUN and 1 INTEGER_OVERFLOW issues reported by Coverity. |
| CVE-2024-46725 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix out-of-bounds write warning Check the ring type value to fix the out-of-bounds write warning |
| CVE-2024-46724 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix out-of-bounds read of df_v1_7_channel_number Check the fb_channel_number range to avoid the array out-of-bounds read error |
| CVE-2024-46723 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix ucode out-of-bounds read warning Clear warning that read ucode[] may out-of-bounds. |
| CVE-2024-46722 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix mc_data out-of-bounds read warning Clear warning that read mc_data[i-1] may out-of-bounds. |
| CVE-2024-46721 | In the Linux kernel, the following vulnerability has been resolved: apparmor: fix possible NULL pointer dereference profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made from __create_missing_ancestors(..) and 'ent->old' is NULL in aa_replace_profiles(..). In that case, it must return an error code and the code, -ENOENT represents its state that the path of its parent is not existed yet. BUG: kernel NULL pointer dereference, address: 0000000000000030 PGD 0 P4D 0 PREEMPT SMP PTI CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Call Trace: <TASK> ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? kernelmode_fixup_or_oops+0xb2/0x140 ? __bad_area_nosemaphore+0x1a5/0x2c0 ? find_vma+0x34/0x60 ? bad_area_nosemaphore+0x16/0x30 ? do_user_addr_fault+0x2a2/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? aafs_create.constprop.0+0x7f/0x130 ? aafs_create.constprop.0+0x51/0x130 __aafs_profile_mkdir+0x3d6/0x480 aa_replace_profiles+0x83f/0x1270 policy_update+0xe3/0x180 profile_load+0xbc/0x150 ? rw_verify_area+0x47/0x140 vfs_write+0x100/0x480 ? __x64_sys_openat+0x55/0xa0 ? syscall_exit_to_user_mode+0x86/0x260 ksys_write+0x73/0x100 __x64_sys_write+0x19/0x30 x64_sys_call+0x7e/0x25c0 do_syscall_64+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7be9f211c574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574 RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004 RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80 R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas CR2: 0000000000000030 ---[ end trace 0000000000000000 ]--- RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000 ---truncated--- |
| CVE-2024-46720 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix dereference after null check check the pointer hive before use. |
| CVE-2024-46719 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix null pointer dereference in trace ucsi_register_altmode checks IS_ERR for the alt pointer and treats NULL as valid. When CONFIG_TYPEC_DP_ALTMODE is not enabled, ucsi_register_displayport returns NULL which causes a NULL pointer dereference in trace. Rather than return NULL, call typec_port_register_altmode to register DisplayPort alternate mode as a non-controllable mode when CONFIG_TYPEC_DP_ALTMODE is not enabled. |
| CVE-2024-46718 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't overmap identity VRAM mapping Overmapping the identity VRAM mapping is triggering hardware bugs on certain platforms. Use 2M pages for the last unaligned (to 1G) VRAM chunk. v2: - Always use 2M pages for last chunk (Fei Yang) - break loop when 2M pages are used - Add assert for usable_size being 2M aligned v3: - Fix checkpatch |
| CVE-2024-46717 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: SHAMPO, Fix incorrect page release Under the following conditions: 1) No skb created yet 2) header_size == 0 (no SHAMPO header) 3) header_index + 1 % MLX5E_SHAMPO_WQ_HEADER_PER_PAGE == 0 (this is the last page fragment of a SHAMPO header page) a new skb is formed with a page that is NOT a SHAMPO header page (it is a regular data page). Further down in the same function (mlx5e_handle_rx_cqe_mpwrq_shampo()), a SHAMPO header page from header_index is released. This is wrong and it leads to SHAMPO header pages being released more than once. |
| CVE-2024-46716 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: altera-msgdma: properly free descriptor in msgdma_free_descriptor Remove list_del call in msgdma_chan_desc_cleanup, this should be the role of msgdma_free_descriptor. In consequence replace list_add_tail with list_move_tail in msgdma_free_descriptor. This fixes the path: msgdma_free_chan_resources -> msgdma_free_descriptors -> msgdma_free_desc_list -> msgdma_free_descriptor which does not correctly free the descriptors as first nodes were not removed from the list. |
| CVE-2024-46715 | In the Linux kernel, the following vulnerability has been resolved: driver: iio: add missing checks on iio_info's callback access Some callbacks from iio_info structure are accessed without any check, so if a driver doesn't implement them trying to access the corresponding sysfs entries produce a kernel oops such as: [ 2203.527791] Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute [...] [ 2203.783416] Call trace: [ 2203.783429] iio_read_channel_info_avail from dev_attr_show+0x18/0x48 [ 2203.789807] dev_attr_show from sysfs_kf_seq_show+0x90/0x120 [ 2203.794181] sysfs_kf_seq_show from seq_read_iter+0xd0/0x4e4 [ 2203.798555] seq_read_iter from vfs_read+0x238/0x2a0 [ 2203.802236] vfs_read from ksys_read+0xa4/0xd4 [ 2203.805385] ksys_read from ret_fast_syscall+0x0/0x54 [ 2203.809135] Exception stack(0xe0badfa8 to 0xe0badff0) [ 2203.812880] dfa0: 00000003 b6f10f80 00000003 b6eab000 00020000 00000000 [ 2203.819746] dfc0: 00000003 b6f10f80 7ff00000 00000003 00000003 00000000 00020000 00000000 [ 2203.826619] dfe0: b6e1bc88 bed80958 b6e1bc94 b6e1bcb0 [ 2203.830363] Code: bad PC value [ 2203.832695] ---[ end trace 0000000000000000 ]--- |
| CVE-2024-46714 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip wbscl_set_scaler_filter if filter is null Callers can pass null in filter (i.e. from returned from the function wbscl_get_filter_coeffs_16p) and a null check is added to ensure that is not the case. This fixes 4 NULL_RETURNS issues reported by Coverity. |
| CVE-2024-46713 | In the Linux kernel, the following vulnerability has been resolved: perf/aux: Fix AUX buffer serialization Ole reported that event->mmap_mutex is strictly insufficient to serialize the AUX buffer, add a per RB mutex to fully serialize it. Note that in the lock order comment the perf_event::mmap_mutex order was already wrong, that is, it nesting under mmap_lock is not new with this patch. |
| CVE-2024-46712 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Disable coherent dumb buffers without 3d Coherent surfaces make only sense if the host renders to them using accelerated apis. Without 3d the entire content of dumb buffers stays in the guest making all of the extra work they're doing to synchronize between guest and host useless. Configurations without 3d also tend to run with very low graphics memory limits. The pinned console fb, mob cursors and graphical login manager tend to run out of 16MB graphics memory that those guests use. Fix it by making sure the coherent dumb buffers are only used on configs with 3d enabled. |
| CVE-2024-46711 | In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix ID 0 endp usage after multiple re-creations 'local_addr_used' and 'add_addr_accepted' are decremented for addresses not related to the initial subflow (ID0), because the source and destination addresses of the initial subflows are known from the beginning: they don't count as "additional local address being used" or "ADD_ADDR being accepted". It is then required not to increment them when the entrypoint used by the initial subflow is removed and re-added during a connection. Without this modification, this entrypoint cannot be removed and re-added more than once. |
| CVE-2024-46710 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Prevent unmapping active read buffers The kms paths keep a persistent map active to read and compare the cursor buffer. These maps can race with each other in simple scenario where: a) buffer "a" mapped for update b) buffer "a" mapped for compare c) do the compare d) unmap "a" for compare e) update the cursor f) unmap "a" for update At step "e" the buffer has been unmapped and the read contents is bogus. Prevent unmapping of active read buffers by simply keeping a count of how many paths have currently active maps and unmap only when the count reaches 0. |
| CVE-2024-46709 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix prime with external buffers Make sure that for external buffers mapping goes through the dma_buf interface instead of trying to access pages directly. External buffers might not provide direct access to readable/writable pages so to make sure the bo's created from external dma_bufs can be read dma_buf interface has to be used. Fixes crashes in IGT's kms_prime with vgem. Regular desktop usage won't trigger this due to the fact that virtual machines will not have multiple GPUs but it enables better test coverage in IGT. |
| CVE-2024-46708 | In the Linux kernel, the following vulnerability has been resolved: pinctrl: qcom: x1e80100: Fix special pin offsets Remove the erroneus 0x100000 offset to prevent the boards from crashing on pin state setting, as well as for the intended state changes to take effect. |
| CVE-2024-46707 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3 On a system with a GICv3, if a guest hasn't been configured with GICv3 and that the host is not capable of GICv2 emulation, a write to any of the ICC_*SGI*_EL1 registers is trapped to EL2. We therefore try to emulate the SGI access, only to hit a NULL pointer as no private interrupt is allocated (no GIC, remember?). The obvious fix is to give the guest what it deserves, in the shape of a UNDEF exception. |
| CVE-2024-46706 | In the Linux kernel, the following vulnerability has been resolved: tty: serial: fsl_lpuart: mark last busy before uart_add_one_port With "earlycon initcall_debug=1 loglevel=8" in bootargs, kernel sometimes boot hang. It is because normal console still is not ready, but runtime suspend is called, so early console putchar will hang in waiting TRDE set in UARTSTAT. The lpuart driver has auto suspend delay set to 3000ms, but during uart_add_one_port, a child device serial ctrl will added and probed with its pm runtime enabled(see serial_ctrl.c). The runtime suspend call path is: device_add |-> bus_probe_device |->device_initial_probe |->__device_attach |-> pm_runtime_get_sync(dev->parent); |-> pm_request_idle(dev); |-> pm_runtime_put(dev->parent); So in the end, before normal console ready, the lpuart get runtime suspended. And earlycon putchar will hang. To address the issue, mark last busy just after pm_runtime_enable, three seconds is long enough to switch from bootconsole to normal console. |
| CVE-2024-46705 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: reset mmio mappings with devm Set our various mmio mappings to NULL. This should make it easier to catch something rogue trying to mess with mmio after device removal. For example, we might unmap everything and then start hitting some mmio address which has already been unmamped by us and then remapped by something else, causing all kinds of carnage. |
| CVE-2024-46704 | In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix spruious data race in __flush_work() When flushing a work item for cancellation, __flush_work() knows that it exclusively owns the work item through its PENDING bit. 134874e2eee9 ("workqueue: Allow cancel_work_sync() and disable_work() from atomic contexts on BH work items") added a read of @work->data to determine whether to use busy wait for BH work items that are being canceled. While the read is safe when @from_cancel, @work->data was read before testing @from_cancel to simplify code structure: data = *work_data_bits(work); if (from_cancel && !WARN_ON_ONCE(data & WORK_STRUCT_PWQ) && (data & WORK_OFFQ_BH)) { While the read data was never used if !@from_cancel, this could trigger KCSAN data race detection spuriously: ================================================================== BUG: KCSAN: data-race in __flush_work / __flush_work write to 0xffff8881223aa3e8 of 8 bytes by task 3998 on cpu 0: instrument_write include/linux/instrumented.h:41 [inline] ___set_bit include/asm-generic/bitops/instrumented-non-atomic.h:28 [inline] insert_wq_barrier kernel/workqueue.c:3790 [inline] start_flush_work kernel/workqueue.c:4142 [inline] __flush_work+0x30b/0x570 kernel/workqueue.c:4178 flush_work kernel/workqueue.c:4229 [inline] ... read to 0xffff8881223aa3e8 of 8 bytes by task 50 on cpu 1: __flush_work+0x42a/0x570 kernel/workqueue.c:4188 flush_work kernel/workqueue.c:4229 [inline] flush_delayed_work+0x66/0x70 kernel/workqueue.c:4251 ... value changed: 0x0000000000400000 -> 0xffff88810006c00d Reorganize the code so that @from_cancel is tested before @work->data is accessed. The only problem is triggering KCSAN detection spuriously. This shouldn't need READ_ONCE() or other access qualifiers. No functional changes. |
| CVE-2024-46703 | In the Linux kernel, the following vulnerability has been resolved: Revert "serial: 8250_omap: Set the console genpd always on if no console suspend" This reverts commit 68e6939ea9ec3d6579eadeab16060339cdeaf940. Kevin reported that this causes a crash during suspend on platforms that dont use PM domains. |
| CVE-2024-46702 | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Mark XDomain as unplugged when router is removed I noticed that when we do discrete host router NVM upgrade and it gets hot-removed from the PCIe side as a result of NVM firmware authentication, if there is another host connected with enabled paths we hang in tearing them down. This is due to fact that the Thunderbolt networking driver also tries to cleanup the paths and ends up blocking in tb_disconnect_xdomain_paths() waiting for the domain lock. However, at this point we already cleaned the paths in tb_stop() so there is really no need for tb_disconnect_xdomain_paths() to do that anymore. Furthermore it already checks if the XDomain is unplugged and bails out early so take advantage of that and mark the XDomain as unplugged when we remove the parent router. |
| CVE-2024-46701 | In the Linux kernel, the following vulnerability has been resolved: libfs: fix infinite directory reads for offset dir After we switch tmpfs dir operations from simple_dir_operations to simple_offset_dir_operations, every rename happened will fill new dentry to dest dir's maple tree(&SHMEM_I(inode)->dir_offsets->mt) with a free key starting with octx->newx_offset, and then set newx_offset equals to free key + 1. This will lead to infinite readdir combine with rename happened at the same time, which fail generic/736 in xfstests(detail show as below). 1. create 5000 files(1 2 3...) under one dir 2. call readdir(man 3 readdir) once, and get one entry 3. rename(entry, "TEMPFILE"), then rename("TEMPFILE", entry) 4. loop 2~3, until readdir return nothing or we loop too many times(tmpfs break test with the second condition) We choose the same logic what commit 9b378f6ad48cf ("btrfs: fix infinite directory reads") to fix it, record the last_index when we open dir, and do not emit the entry which index >= last_index. The file->private_data now used in offset dir can use directly to do this, and we also update the last_index when we llseek the dir file. [brauner: only update last_index after seek when offset is zero like Jan suggested] |
| CVE-2024-46700 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/mes: fix mes ring buffer overflow wait memory room until enough before writing mes packets to avoid ring buffer overflow. v2: squash in sched_hw_submission fix (cherry picked from commit 34e087e8920e635c62e2ed6a758b0cd27f836d13) |
| CVE-2024-46699 | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Disable preemption while updating GPU stats We forgot to disable preemption around the write_seqcount_begin/end() pair while updating GPU stats: [ ] WARNING: CPU: 2 PID: 12 at include/linux/seqlock.h:221 __seqprop_assert.isra.0+0x128/0x150 [v3d] [ ] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched] <...snip...> [ ] Call trace: [ ] __seqprop_assert.isra.0+0x128/0x150 [v3d] [ ] v3d_job_start_stats.isra.0+0x90/0x218 [v3d] [ ] v3d_bin_job_run+0x23c/0x388 [v3d] [ ] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched] [ ] process_one_work+0x62c/0xb48 [ ] worker_thread+0x468/0x5b0 [ ] kthread+0x1c4/0x1e0 [ ] ret_from_fork+0x10/0x20 Fix it. |
| CVE-2024-46698 | In the Linux kernel, the following vulnerability has been resolved: video/aperture: optionally match the device in sysfb_disable() In aperture_remove_conflicting_pci_devices(), we currently only call sysfb_disable() on vga class devices. This leads to the following problem when the pimary device is not VGA compatible: 1. A PCI device with a non-VGA class is the boot display 2. That device is probed first and it is not a VGA device so sysfb_disable() is not called, but the device resources are freed by aperture_detach_platform_device() 3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable() 4. NULL pointer dereference via sysfb_disable() since the resources have already been freed by aperture_detach_platform_device() when it was called by the other device. Fix this by passing a device pointer to sysfb_disable() and checking the device to determine if we should execute it or not. v2: Fix build when CONFIG_SCREEN_INFO is not set v3: Move device check into the mutex Drop primary variable in aperture_remove_conflicting_pci_devices() Drop __init on pci sysfb_pci_dev_is_enabled() |
| CVE-2024-46697 | In the Linux kernel, the following vulnerability has been resolved: nfsd: ensure that nfsd4_fattr_args.context is zeroed out If nfsd4_encode_fattr4 ends up doing a "goto out" before we get to checking for the security label, then args.context will be set to uninitialized junk on the stack, which we'll then try to free. Initialize it early. |
| CVE-2024-46696 | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix potential UAF in nfsd4_cb_getattr_release Once we drop the delegation reference, the fields embedded in it are no longer safe to access. Do that last. |
| CVE-2024-46695 | In the Linux kernel, the following vulnerability has been resolved: selinux,smack: don't bypass permissions check in inode_setsecctx hook Marek Gresko reports that the root user on an NFS client is able to change the security labels on files on an NFS filesystem that is exported with root squashing enabled. The end of the kerneldoc comment for __vfs_setxattr_noperm() states: * This function requires the caller to lock the inode's i_mutex before it * is executed. It also assumes that the caller will make the appropriate * permission checks. nfsd_setattr() does do permissions checking via fh_verify() and nfsd_permission(), but those don't do all the same permissions checks that are done by security_inode_setxattr() and its related LSM hooks do. Since nfsd_setattr() is the only consumer of security_inode_setsecctx(), simplest solution appears to be to replace the call to __vfs_setxattr_noperm() with a call to __vfs_setxattr_locked(). This fixes the above issue and has the added benefit of causing nfsd to recall conflicting delegations on a file when a client tries to change its security label. |
| CVE-2024-46694 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: avoid using null object of framebuffer Instead of using state->fb->obj[0] directly, get object from framebuffer by calling drm_gem_fb_get_obj() and return error code when object is null to avoid using null object of framebuffer. (cherry picked from commit 73dd0ad9e5dad53766ea3e631303430116f834b3) |
| CVE-2024-46693 | In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pmic_glink: Fix race during initialization As pointed out by Stephen Boyd it is possible that during initialization of the pmic_glink child drivers, the protection-domain notifiers fires, and the associated work is scheduled, before the client registration returns and as a result the local "client" pointer has been initialized. The outcome of this is a NULL pointer dereference as the "client" pointer is blindly dereferenced. Timeline provided by Stephen: CPU0 CPU1 ---- ---- ucsi->client = NULL; devm_pmic_glink_register_client() client->pdr_notify(client->priv, pg->client_state) pmic_glink_ucsi_pdr_notify() schedule_work(&ucsi->register_work) <schedule away> pmic_glink_ucsi_register() ucsi_register() pmic_glink_ucsi_read_version() pmic_glink_ucsi_read() pmic_glink_ucsi_read() pmic_glink_send(ucsi->client) <client is NULL BAD> ucsi->client = client // Too late! This code is identical across the altmode, battery manager and usci child drivers. Resolve this by splitting the allocation of the "client" object and the registration thereof into two operations. This only happens if the protection domain registry is populated at the time of registration, which by the introduction of commit '1ebcde047c54 ("soc: qcom: add pd-mapper implementation")' became much more likely. |
| CVE-2024-46692 | In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Mark get_wq_ctx() as atomic call Currently get_wq_ctx() is wrongly configured as a standard call. When two SMC calls are in sleep and one SMC wakes up, it calls get_wq_ctx() to resume the corresponding sleeping thread. But if get_wq_ctx() is interrupted, goes to sleep and another SMC call is waiting to be allocated a waitq context, it leads to a deadlock. To avoid this get_wq_ctx() must be an atomic call and can't be a standard SMC call. Hence mark get_wq_ctx() as a fast call. |
| CVE-2024-46691 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Move unregister out of atomic section Commit '9329933699b3 ("soc: qcom: pmic_glink: Make client-lock non-sleeping")' moved the pmic_glink client list under a spinlock, as it is accessed by the rpmsg/glink callback, which in turn is invoked from IRQ context. This means that ucsi_unregister() is now called from atomic context, which isn't feasible as it's expecting a sleepable context. An effort is under way to get GLINK to invoke its callbacks in a sleepable context, but until then lets schedule the unregistration. A side effect of this is that ucsi_unregister() can now happen after the remote processor, and thereby the communication link with it, is gone. pmic_glink_send() is amended with a check to avoid the resulting NULL pointer dereference. This does however result in the user being informed about this error by the following entry in the kernel log: ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI write request: -5 |
| CVE-2024-46690 | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease It is not safe to dereference fl->c.flc_owner without first confirming fl->fl_lmops is the expected manager. nfsd4_deleg_getattr_conflict() tests fl_lmops but largely ignores the result and assumes that flc_owner is an nfs4_delegation anyway. This is wrong. With this patch we restore the "!= &nfsd_lease_mng_ops" case to behave as it did before the change mentioned below. This is the same as the current code, but without any reference to a possible delegation. |
| CVE-2024-46689 | In the Linux kernel, the following vulnerability has been resolved: soc: qcom: cmd-db: Map shared memory as WC, not WB Linux does not write into cmd-db region. This region of memory is write protected by XPU. XPU may sometime falsely detect clean cache eviction as "write" into the write protected region leading to secure interrupt which causes an endless loop somewhere in Trust Zone. The only reason it is working right now is because Qualcomm Hypervisor maps the same region as Non-Cacheable memory in Stage 2 translation tables. The issue manifests if we want to use another hypervisor (like Xen or KVM), which does not know anything about those specific mappings. Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC removes dependency on correct mappings in Stage 2 tables. This patch fixes the issue by updating the mapping to MEMREMAP_WC. I tested this on SA8155P with Xen. |
| CVE-2024-46688 | In the Linux kernel, the following vulnerability has been resolved: erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails If z_erofs_gbuf_growsize() partially fails on a global buffer due to memory allocation failure or fault injection (as reported by syzbot [1]), new pages need to be freed by comparing to the existing pages to avoid memory leaks. However, the old gbuf->pages[] array may not be large enough, which can lead to null-ptr-deref or out-of-bound access. Fix this by checking against gbuf->nrpages in advance. [1] https://lore.kernel.org/r/[email protected] |
| CVE-2024-46687 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix a use-after-free when hitting errors inside btrfs_submit_chunk() [BUG] There is an internal report that KASAN is reporting use-after-free, with the following backtrace: BUG: KASAN: slab-use-after-free in btrfs_check_read_bio+0xa68/0xb70 [btrfs] Read of size 4 at addr ffff8881117cec28 by task kworker/u16:2/45 CPU: 1 UID: 0 PID: 45 Comm: kworker/u16:2 Not tainted 6.11.0-rc2-next-20240805-default+ #76 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] Call Trace: dump_stack_lvl+0x61/0x80 print_address_description.constprop.0+0x5e/0x2f0 print_report+0x118/0x216 kasan_report+0x11d/0x1f0 btrfs_check_read_bio+0xa68/0xb70 [btrfs] process_one_work+0xce0/0x12a0 worker_thread+0x717/0x1250 kthread+0x2e3/0x3c0 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x11/0x20 Allocated by task 20917: kasan_save_stack+0x37/0x60 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x7d/0x80 kmem_cache_alloc_noprof+0x16e/0x3e0 mempool_alloc_noprof+0x12e/0x310 bio_alloc_bioset+0x3f0/0x7a0 btrfs_bio_alloc+0x2e/0x50 [btrfs] submit_extent_page+0x4d1/0xdb0 [btrfs] btrfs_do_readpage+0x8b4/0x12a0 [btrfs] btrfs_readahead+0x29a/0x430 [btrfs] read_pages+0x1a7/0xc60 page_cache_ra_unbounded+0x2ad/0x560 filemap_get_pages+0x629/0xa20 filemap_read+0x335/0xbf0 vfs_read+0x790/0xcb0 ksys_read+0xfd/0x1d0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 20917: kasan_save_stack+0x37/0x60 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x50 __kasan_slab_free+0x4b/0x60 kmem_cache_free+0x214/0x5d0 bio_free+0xed/0x180 end_bbio_data_read+0x1cc/0x580 [btrfs] btrfs_submit_chunk+0x98d/0x1880 [btrfs] btrfs_submit_bio+0x33/0x70 [btrfs] submit_one_bio+0xd4/0x130 [btrfs] submit_extent_page+0x3ea/0xdb0 [btrfs] btrfs_do_readpage+0x8b4/0x12a0 [btrfs] btrfs_readahead+0x29a/0x430 [btrfs] read_pages+0x1a7/0xc60 page_cache_ra_unbounded+0x2ad/0x560 filemap_get_pages+0x629/0xa20 filemap_read+0x335/0xbf0 vfs_read+0x790/0xcb0 ksys_read+0xfd/0x1d0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [CAUSE] Although I cannot reproduce the error, the report itself is good enough to pin down the cause. The call trace is the regular endio workqueue context, but the free-by-task trace is showing that during btrfs_submit_chunk() we already hit a critical error, and is calling btrfs_bio_end_io() to error out. And the original endio function called bio_put() to free the whole bio. This means a double freeing thus causing use-after-free, e.g.: 1. Enter btrfs_submit_bio() with a read bio The read bio length is 128K, crossing two 64K stripes. 2. The first run of btrfs_submit_chunk() 2.1 Call btrfs_map_block(), which returns 64K 2.2 Call btrfs_split_bio() Now there are two bios, one referring to the first 64K, the other referring to the second 64K. 2.3 The first half is submitted. 3. The second run of btrfs_submit_chunk() 3.1 Call btrfs_map_block(), which by somehow failed Now we call btrfs_bio_end_io() to handle the error 3.2 btrfs_bio_end_io() calls the original endio function Which is end_bbio_data_read(), and it calls bio_put() for the original bio. Now the original bio is freed. 4. The submitted first 64K bio finished Now we call into btrfs_check_read_bio() and tries to advance the bio iter. But since the original bio (thus its iter) is already freed, we trigger the above use-after free. And even if the memory is not poisoned/corrupted, we will later call the original endio function, causing a double freeing. [FIX] Instead of calling btrfs_bio_end_io(), call btrfs_orig_bbio_end_io(), which has the extra check on split bios and do the pr ---truncated--- |
| CVE-2024-46686 | In the Linux kernel, the following vulnerability has been resolved: smb/client: avoid dereferencing rdata=NULL in smb2_new_read_req() This happens when called from SMB2_read() while using rdma and reaching the rdma_readwrite_threshold. |
| CVE-2024-46685 | In the Linux kernel, the following vulnerability has been resolved: pinctrl: single: fix potential NULL dereference in pcs_get_function() pinmux_generic_get_function() can return NULL and the pointer 'function' was dereferenced without checking against NULL. Add checking of pointer 'function' in pcs_get_function(). Found by code review. |
| CVE-2024-46684 | In the Linux kernel, the following vulnerability has been resolved: binfmt_elf_fdpic: fix AUXV size calculation when ELF_HWCAP2 is defined create_elf_fdpic_tables() does not correctly account the space for the AUX vector when an architecture has ELF_HWCAP2 defined. Prior to the commit 10e29251be0e ("binfmt_elf_fdpic: fix /proc/<pid>/auxv") it resulted in the last entry of the AUX vector being set to zero, but with that change it results in a kernel BUG. Fix that by adding one to the number of AUXV entries (nitems) when ELF_HWCAP2 is defined. |
| CVE-2024-46683 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: prevent UAF around preempt fence The fence lock is part of the queue, therefore in the current design anything locking the fence should then also hold a ref to the queue to prevent the queue from being freed. However, currently it looks like we signal the fence and then drop the queue ref, but if something is waiting on the fence, the waiter is kicked to wake up at some later point, where upon waking up it first grabs the lock before checking the fence state. But if we have already dropped the queue ref, then the lock might already be freed as part of the queue, leading to uaf. To prevent this, move the fence lock into the fence itself so we don't run into lifetime issues. Alternative might be to have device level lock, or only release the queue in the fence release callback, however that might require pushing to another worker to avoid locking issues. References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2454 References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2342 References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2020 (cherry picked from commit 7116c35aacedc38be6d15bd21b2fc936eed0008b) |
| CVE-2024-46682 | In the Linux kernel, the following vulnerability has been resolved: nfsd: prevent panic for nfsv4.0 closed files in nfs4_show_open Prior to commit 3f29cc82a84c ("nfsd: split sc_status out of sc_type") states_show() relied on sc_type field to be of valid type before calling into a subfunction to show content of a particular stateid. From that commit, we split the validity of the stateid into sc_status and no longer changed sc_type to 0 while unhashing the stateid. This resulted in kernel oopsing for nfsv4.0 opens that stay around and in nfs4_show_open() would derefence sc_file which was NULL. Instead, for closed open stateids forgo displaying information that relies of having a valid sc_file. To reproduce: mount the server with 4.0, read and close a file and then on the server cat /proc/fs/nfsd/clients/2/states [ 513.590804] Call trace: [ 513.590925] _raw_spin_lock+0xcc/0x160 [ 513.591119] nfs4_show_open+0x78/0x2c0 [nfsd] [ 513.591412] states_show+0x44c/0x488 [nfsd] [ 513.591681] seq_read_iter+0x5d8/0x760 [ 513.591896] seq_read+0x188/0x208 [ 513.592075] vfs_read+0x148/0x470 [ 513.592241] ksys_read+0xcc/0x178 |
| CVE-2024-46681 | In the Linux kernel, the following vulnerability has been resolved: pktgen: use cpus_read_lock() in pg_net_init() I have seen the WARN_ON(smp_processor_id() != cpu) firing in pktgen_thread_worker() during tests. We must use cpus_read_lock()/cpus_read_unlock() around the for_each_online_cpu(cpu) loop. While we are at it use WARN_ON_ONCE() to avoid a possible syslog flood. |
| CVE-2024-46680 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix random crash seen while removing driver This fixes the random kernel crash seen while removing the driver, when running the load/unload test over multiple iterations. 1) modprobe btnxpuart 2) hciconfig hci0 reset 3) hciconfig (check hci0 interface up with valid BD address) 4) modprobe -r btnxpuart Repeat steps 1 to 4 The ps_wakeup() call in btnxpuart_close() schedules the psdata->work(), which gets scheduled after module is removed, causing a kernel crash. This hidden issue got highlighted after enabling Power Save by default in 4183a7be7700 (Bluetooth: btnxpuart: Enable Power Save feature on startup) The new ps_cleanup() deasserts UART break immediately while closing serdev device, cancels any scheduled ps_work and destroys the ps_lock mutex. [ 85.884604] Unable to handle kernel paging request at virtual address ffffd4a61638f258 [ 85.884624] Mem abort info: [ 85.884625] ESR = 0x0000000086000007 [ 85.884628] EC = 0x21: IABT (current EL), IL = 32 bits [ 85.884633] SET = 0, FnV = 0 [ 85.884636] EA = 0, S1PTW = 0 [ 85.884638] FSC = 0x07: level 3 translation fault [ 85.884642] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041dd0000 [ 85.884646] [ffffd4a61638f258] pgd=1000000095fff003, p4d=1000000095fff003, pud=100000004823d003, pmd=100000004823e003, pte=0000000000000000 [ 85.884662] Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP [ 85.890932] Modules linked in: algif_hash algif_skcipher af_alg overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_spdif snd_soc_fsl_micfil snd_soc_fsl_sai snd_soc_fsl_utils gpio_ir_recv rc_core fuse [last unloaded: btnxpuart(O)] [ 85.927297] CPU: 1 PID: 67 Comm: kworker/1:3 Tainted: G O 6.1.36+g937b1be4345a #1 [ 85.936176] Hardware name: FSL i.MX8MM EVK board (DT) [ 85.936182] Workqueue: events 0xffffd4a61638f380 [ 85.936198] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 85.952817] pc : 0xffffd4a61638f258 [ 85.952823] lr : 0xffffd4a61638f258 [ 85.952827] sp : ffff8000084fbd70 [ 85.952829] x29: ffff8000084fbd70 x28: 0000000000000000 x27: 0000000000000000 [ 85.963112] x26: ffffd4a69133f000 x25: ffff4bf1c8540990 x24: ffff4bf215b87305 [ 85.963119] x23: ffff4bf215b87300 x22: ffff4bf1c85409d0 x21: ffff4bf1c8540970 [ 85.977382] x20: 0000000000000000 x19: ffff4bf1c8540880 x18: 0000000000000000 [ 85.977391] x17: 0000000000000000 x16: 0000000000000133 x15: 0000ffffe2217090 [ 85.977399] x14: 0000000000000001 x13: 0000000000000133 x12: 0000000000000139 [ 85.977407] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff8000084fbc50 [ 85.977417] x8 : ffff4bf215b7d000 x7 : ffff4bf215b83b40 x6 : 00000000000003e8 [ 85.977424] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000000 [ 85.977432] x2 : 0000000000000000 x1 : ffff4bf1c4265880 x0 : 0000000000000000 [ 85.977443] Call trace: [ 85.977446] 0xffffd4a61638f258 [ 85.977451] 0xffffd4a61638f3e8 [ 85.977455] process_one_work+0x1d4/0x330 [ 85.977464] worker_thread+0x6c/0x430 [ 85.977471] kthread+0x108/0x10c [ 85.977476] ret_from_fork+0x10/0x20 [ 85.977488] Code: bad PC value [ 85.977491] ---[ end trace 0000000000000000 ]--- Preset since v6.9.11 |
| CVE-2024-46679 | In the Linux kernel, the following vulnerability has been resolved: ethtool: check device is present when getting link settings A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd7fb65 ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. |
| CVE-2024-46678 | In the Linux kernel, the following vulnerability has been resolved: bonding: change ipsec_lock from spin lock to mutex In the cited commit, bond->ipsec_lock is added to protect ipsec_list, hence xdo_dev_state_add and xdo_dev_state_delete are called inside this lock. As ipsec_lock is a spin lock and such xfrmdev ops may sleep, "scheduling while atomic" will be triggered when changing bond's active slave. [ 101.055189] BUG: scheduling while atomic: bash/902/0x00000200 [ 101.055726] Modules linked in: [ 101.058211] CPU: 3 PID: 902 Comm: bash Not tainted 6.9.0-rc4+ #1 [ 101.058760] Hardware name: [ 101.059434] Call Trace: [ 101.059436] <TASK> [ 101.060873] dump_stack_lvl+0x51/0x60 [ 101.061275] __schedule_bug+0x4e/0x60 [ 101.061682] __schedule+0x612/0x7c0 [ 101.062078] ? __mod_timer+0x25c/0x370 [ 101.062486] schedule+0x25/0xd0 [ 101.062845] schedule_timeout+0x77/0xf0 [ 101.063265] ? asm_common_interrupt+0x22/0x40 [ 101.063724] ? __bpf_trace_itimer_state+0x10/0x10 [ 101.064215] __wait_for_common+0x87/0x190 [ 101.064648] ? usleep_range_state+0x90/0x90 [ 101.065091] cmd_exec+0x437/0xb20 [mlx5_core] [ 101.065569] mlx5_cmd_do+0x1e/0x40 [mlx5_core] [ 101.066051] mlx5_cmd_exec+0x18/0x30 [mlx5_core] [ 101.066552] mlx5_crypto_create_dek_key+0xea/0x120 [mlx5_core] [ 101.067163] ? bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.067738] ? kmalloc_trace+0x4d/0x350 [ 101.068156] mlx5_ipsec_create_sa_ctx+0x33/0x100 [mlx5_core] [ 101.068747] mlx5e_xfrm_add_state+0x47b/0xaa0 [mlx5_core] [ 101.069312] bond_change_active_slave+0x392/0x900 [bonding] [ 101.069868] bond_option_active_slave_set+0x1c2/0x240 [bonding] [ 101.070454] __bond_opt_set+0xa6/0x430 [bonding] [ 101.070935] __bond_opt_set_notify+0x2f/0x90 [bonding] [ 101.071453] bond_opt_tryset_rtnl+0x72/0xb0 [bonding] [ 101.071965] bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.072567] kernfs_fop_write_iter+0x10c/0x1a0 [ 101.073033] vfs_write+0x2d8/0x400 [ 101.073416] ? alloc_fd+0x48/0x180 [ 101.073798] ksys_write+0x5f/0xe0 [ 101.074175] do_syscall_64+0x52/0x110 [ 101.074576] entry_SYSCALL_64_after_hwframe+0x4b/0x53 As bond_ipsec_add_sa_all and bond_ipsec_del_sa_all are only called from bond_change_active_slave, which requires holding the RTNL lock. And bond_ipsec_add_sa and bond_ipsec_del_sa are xfrm state xdo_dev_state_add and xdo_dev_state_delete APIs, which are in user context. So ipsec_lock doesn't have to be spin lock, change it to mutex, and thus the above issue can be resolved. |
| CVE-2024-46677 | In the Linux kernel, the following vulnerability has been resolved: gtp: fix a potential NULL pointer dereference When sockfd_lookup() fails, gtp_encap_enable_socket() returns a NULL pointer, but its callers only check for error pointers thus miss the NULL pointer case. Fix it by returning an error pointer with the error code carried from sockfd_lookup(). (I found this bug during code inspection.) |
| CVE-2024-46676 | In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Add poll mod list filling check In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-46675 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: Prevent USB core invalid event buffer address access This commit addresses an issue where the USB core could access an invalid event buffer address during runtime suspend, potentially causing SMMU faults and other memory issues in Exynos platforms. The problem arises from the following sequence. 1. In dwc3_gadget_suspend, there is a chance of a timeout when moving the USB core to the halt state after clearing the run/stop bit by software. 2. In dwc3_core_exit, the event buffer is cleared regardless of the USB core's status, which may lead to an SMMU faults and other memory issues. if the USB core tries to access the event buffer address. To prevent this hardware quirk on Exynos platforms, this commit ensures that the event buffer address is not cleared by software when the USB core is active during runtime suspend by checking its status before clearing the buffer address. |
| CVE-2024-46674 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: st: fix probed platform device ref count on probe error path The probe function never performs any paltform device allocation, thus error path "undo_platform_dev_alloc" is entirely bogus. It drops the reference count from the platform device being probed. If error path is triggered, this will lead to unbalanced device reference counts and premature release of device resources, thus possible use-after-free when releasing remaining devm-managed resources. |
| CVE-2024-46673 | In the Linux kernel, the following vulnerability has been resolved: scsi: aacraid: Fix double-free on probe failure aac_probe_one() calls hardware-specific init functions through the aac_driver_ident::init pointer, all of which eventually call down to aac_init_adapter(). If aac_init_adapter() fails after allocating memory for aac_dev::queues, it frees the memory but does not clear that member. After the hardware-specific init function returns an error, aac_probe_one() goes down an error path that frees the memory pointed to by aac_dev::queues, resulting.in a double-free. |
| CVE-2024-46672 | In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the driver for SAE/OWE offload cases") SSID based PMKSA del commands. brcmfmac is not prepared and tries to dereference the NULL bssid and pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based updates so copy the SSID. |
| CVE-2024-45030 | In the Linux kernel, the following vulnerability has been resolved: igb: cope with large MAX_SKB_FRAGS Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient. |
| CVE-2024-45029 | In the Linux kernel, the following vulnerability has been resolved: i2c: tegra: Do not mark ACPI devices as irq safe On ACPI machines, the tegra i2c module encounters an issue due to a mutex being called inside a spinlock. This leads to the following bug: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585 ... Call trace: __might_sleep __mutex_lock_common mutex_lock_nested acpi_subsys_runtime_resume rpm_resume tegra_i2c_xfer The problem arises because during __pm_runtime_resume(), the spinlock &dev->power.lock is acquired before rpm_resume() is called. Later, rpm_resume() invokes acpi_subsys_runtime_resume(), which relies on mutexes, triggering the error. To address this issue, devices on ACPI are now marked as not IRQ-safe, considering the dependency of acpi_subsys_runtime_resume() on mutexes. |
| CVE-2024-45028 | In the Linux kernel, the following vulnerability has been resolved: mmc: mmc_test: Fix NULL dereference on allocation failure If the "test->highmem = alloc_pages()" allocation fails then calling __free_pages(test->highmem) will result in a NULL dereference. Also change the error code to -ENOMEM instead of returning success. |
| CVE-2024-45027 | In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup() If xhci_mem_init() fails, it calls into xhci_mem_cleanup() to mop up the damage. If it fails early enough, before xhci->interrupters is allocated but after xhci->max_interrupters has been set, which happens in most (all?) cases, things get uglier, as xhci_mem_cleanup() unconditionally derefences xhci->interrupters. With prejudice. Gate the interrupt freeing loop with a check on xhci->interrupters being non-NULL. Found while debugging a DMA allocation issue that led the XHCI driver on this exact path. |
| CVE-2024-45026 | In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix error recovery leading to data corruption on ESE devices Extent Space Efficient (ESE) or thin provisioned volumes need to be formatted on demand during usual IO processing. The dasd_ese_needs_format function checks for error codes that signal the non existence of a proper track format. The check for incorrect length is to imprecise since other error cases leading to transport of insufficient data also have this flag set. This might lead to data corruption in certain error cases for example during a storage server warmstart. Fix by removing the check for incorrect length and replacing by explicitly checking for invalid track format in transport mode. Also remove the check for file protected since this is not a valid ESE handling case. |
| CVE-2024-45025 | In the Linux kernel, the following vulnerability has been resolved: fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE copy_fd_bitmaps(new, old, count) is expected to copy the first count/BITS_PER_LONG bits from old->full_fds_bits[] and fill the rest with zeroes. What it does is copying enough words (BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest. That works fine, *if* all bits past the cutoff point are clear. Otherwise we are risking garbage from the last word we'd copied. For most of the callers that is true - expand_fdtable() has count equal to old->max_fds, so there's no open descriptors past count, let alone fully occupied words in ->open_fds[], which is what bits in ->full_fds_bits[] correspond to. The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds), which is the smallest multiple of BITS_PER_LONG that covers all opened descriptors below max_fds. In the common case (copying on fork()) max_fds is ~0U, so all opened descriptors will be below it and we are fine, by the same reasons why the call in expand_fdtable() is safe. Unfortunately, there is a case where max_fds is less than that and where we might, indeed, end up with junk in ->full_fds_bits[] - close_range(from, to, CLOSE_RANGE_UNSHARE) with * descriptor table being currently shared * 'to' being above the current capacity of descriptor table * 'from' being just under some chunk of opened descriptors. In that case we end up with observably wrong behaviour - e.g. spawn a child with CLONE_FILES, get all descriptors in range 0..127 open, then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending up with descriptor #128, despite #64 being observably not open. The minimally invasive fix would be to deal with that in dup_fd(). If this proves to add measurable overhead, we can go that way, but let's try to fix copy_fd_bitmaps() first. * new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size). * make copy_fd_bitmaps() take the bitmap size in words, rather than bits; it's 'count' argument is always a multiple of BITS_PER_LONG, so we are not losing any information, and that way we can use the same helper for all three bitmaps - compiler will see that count is a multiple of BITS_PER_LONG for the large ones, so it'll generate plain memcpy()+memset(). Reproducer added to tools/testing/selftests/core/close_range_test.c |
| CVE-2024-45024 | In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb vs. core-mm PT locking We recently made GUP's common page table walking code to also walk hugetlb VMAs without most hugetlb special-casing, preparing for the future of having less hugetlb-specific page table walking code in the codebase. Turns out that we missed one page table locking detail: page table locking for hugetlb folios that are not mapped using a single PMD/PUD. Assume we have hugetlb folio that spans multiple PTEs (e.g., 64 KiB hugetlb folios on arm64 with 4 KiB base page size). GUP, as it walks the page tables, will perform a pte_offset_map_lock() to grab the PTE table lock. However, hugetlb that concurrently modifies these page tables would actually grab the mm->page_table_lock: with USE_SPLIT_PTE_PTLOCKS, the locks would differ. Something similar can happen right now with hugetlb folios that span multiple PMDs when USE_SPLIT_PMD_PTLOCKS. This issue can be reproduced [1], for example triggering: [ 3105.936100] ------------[ cut here ]------------ [ 3105.939323] WARNING: CPU: 31 PID: 2732 at mm/gup.c:142 try_grab_folio+0x11c/0x188 [ 3105.944634] Modules linked in: [...] [ 3105.974841] CPU: 31 PID: 2732 Comm: reproducer Not tainted 6.10.0-64.eln141.aarch64 #1 [ 3105.980406] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-4.fc40 05/24/2024 [ 3105.986185] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3105.991108] pc : try_grab_folio+0x11c/0x188 [ 3105.994013] lr : follow_page_pte+0xd8/0x430 [ 3105.996986] sp : ffff80008eafb8f0 [ 3105.999346] x29: ffff80008eafb900 x28: ffffffe8d481f380 x27: 00f80001207cff43 [ 3106.004414] x26: 0000000000000001 x25: 0000000000000000 x24: ffff80008eafba48 [ 3106.009520] x23: 0000ffff9372f000 x22: ffff7a54459e2000 x21: ffff7a546c1aa978 [ 3106.014529] x20: ffffffe8d481f3c0 x19: 0000000000610041 x18: 0000000000000001 [ 3106.019506] x17: 0000000000000001 x16: ffffffffffffffff x15: 0000000000000000 [ 3106.024494] x14: ffffb85477fdfe08 x13: 0000ffff9372ffff x12: 0000000000000000 [ 3106.029469] x11: 1fffef4a88a96be1 x10: ffff7a54454b5f0c x9 : ffffb854771b12f0 [ 3106.034324] x8 : 0008000000000000 x7 : ffff7a546c1aa980 x6 : 0008000000000080 [ 3106.038902] x5 : 00000000001207cf x4 : 0000ffff9372f000 x3 : ffffffe8d481f000 [ 3106.043420] x2 : 0000000000610041 x1 : 0000000000000001 x0 : 0000000000000000 [ 3106.047957] Call trace: [ 3106.049522] try_grab_folio+0x11c/0x188 [ 3106.051996] follow_pmd_mask.constprop.0.isra.0+0x150/0x2e0 [ 3106.055527] follow_page_mask+0x1a0/0x2b8 [ 3106.058118] __get_user_pages+0xf0/0x348 [ 3106.060647] faultin_page_range+0xb0/0x360 [ 3106.063651] do_madvise+0x340/0x598 Let's make huge_pte_lockptr() effectively use the same PT locks as any core-mm page table walker would. Add ptep_lockptr() to obtain the PTE page table lock using a pte pointer -- unfortunately we cannot convert pte_lockptr() because virt_to_page() doesn't work with kmap'ed page tables we can have with CONFIG_HIGHPTE. Handle CONFIG_PGTABLE_LEVELS correctly by checking in reverse order, such that when e.g., CONFIG_PGTABLE_LEVELS==2 with PGDIR_SIZE==P4D_SIZE==PUD_SIZE==PMD_SIZE will work as expected. Document why that works. There is one ugly case: powerpc 8xx, whereby we have an 8 MiB hugetlb folio being mapped using two PTE page tables. While hugetlb wants to take the PMD table lock, core-mm would grab the PTE table lock of one of both PTE page tables. In such corner cases, we have to make sure that both locks match, which is (fortunately!) currently guaranteed for 8xx as it does not support SMP and consequently doesn't use split PT locks. [1] https://lore.kernel.org/all/[email protected]/ |
| CVE-2024-45023 | In the Linux kernel, the following vulnerability has been resolved: md/raid1: Fix data corruption for degraded array with slow disk read_balance() will avoid reading from slow disks as much as possible, however, if valid data only lands in slow disks, and a new normal disk is still in recovery, unrecovered data can be read: raid1_read_request read_balance raid1_should_read_first -> return false choose_best_rdev -> normal disk is not recovered, return -1 choose_bb_rdev -> missing the checking of recovery, return the normal disk -> read unrecovered data Root cause is that the checking of recovery is missing in choose_bb_rdev(). Hence add such checking to fix the problem. Also fix similar problem in choose_slow_rdev(). |
| CVE-2024-45022 | In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0 The __vmap_pages_range_noflush() assumes its argument pages** contains pages with the same page shift. However, since commit e9c3cda4d86e ("mm, vmalloc: fix high order __GFP_NOFAIL allocations"), if gfp_flags includes __GFP_NOFAIL with high order in vm_area_alloc_pages() and page allocation failed for high order, the pages** may contain two different page shifts (high order and order-0). This could lead __vmap_pages_range_noflush() to perform incorrect mappings, potentially resulting in memory corruption. Users might encounter this as follows (vmap_allow_huge = true, 2M is for PMD_SIZE): kvmalloc(2M, __GFP_NOFAIL|GFP_X) __vmalloc_node_range_noprof(vm_flags=VM_ALLOW_HUGE_VMAP) vm_area_alloc_pages(order=9) ---> order-9 allocation failed and fallback to order-0 vmap_pages_range() vmap_pages_range_noflush() __vmap_pages_range_noflush(page_shift = 21) ----> wrong mapping happens We can remove the fallback code because if a high-order allocation fails, __vmalloc_node_range_noprof() will retry with order-0. Therefore, it is unnecessary to fallback to order-0 here. Therefore, fix this by removing the fallback code. |
| CVE-2024-45021 | In the Linux kernel, the following vulnerability has been resolved: memcg_write_event_control(): fix a user-triggerable oops we are *not* guaranteed that anything past the terminating NUL is mapped (let alone initialized with anything sane). |
| CVE-2024-45020 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a kernel verifier crash in stacksafe() Daniel Hodges reported a kernel verifier crash when playing with sched-ext. Further investigation shows that the crash is due to invalid memory access in stacksafe(). More specifically, it is the following code: if (exact != NOT_EXACT && old->stack[spi].slot_type[i % BPF_REG_SIZE] != cur->stack[spi].slot_type[i % BPF_REG_SIZE]) return false; The 'i' iterates old->allocated_stack. If cur->allocated_stack < old->allocated_stack the out-of-bound access will happen. To fix the issue add 'i >= cur->allocated_stack' check such that if the condition is true, stacksafe() should fail. Otherwise, cur->stack[spi].slot_type[i % BPF_REG_SIZE] memory access is legal. |
| CVE-2024-45019 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Take state lock during tx timeout reporter mlx5e_safe_reopen_channels() requires the state lock taken. The referenced changed in the Fixes tag removed the lock to fix another issue. This patch adds it back but at a later point (when calling mlx5e_safe_reopen_channels()) to avoid the deadlock referenced in the Fixes tag. |
| CVE-2024-45018 | In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: initialise extack before use Fix missing initialisation of extack in flow offload. |
| CVE-2024-45017 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix IPsec RoCE MPV trace call Prevent the call trace below from happening, by not allowing IPsec creation over a slave, if master device doesn't support IPsec. WARNING: CPU: 44 PID: 16136 at kernel/locking/rwsem.c:240 down_read+0x75/0x94 Modules linked in: esp4_offload esp4 act_mirred act_vlan cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa mst_pciconf(OE) nfsv3 nfs_acl nfs lockd grace fscache netfs xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill cuse fuse rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm ipmi_ssif intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel sha1_ssse3 dell_smbios ib_uverbs aesni_intel crypto_simd dcdbas wmi_bmof dell_wmi_descriptor cryptd pcspkr ib_core acpi_ipmi sp5100_tco ccp i2c_piix4 ipmi_si ptdma k10temp ipmi_devintf ipmi_msghandler acpi_power_meter acpi_cpufreq ext4 mbcache jbd2 sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect mlx5_core sysimgblt fb_sys_fops cec ahci libahci mlxfw drm pci_hyperv_intf libata tg3 sha256_ssse3 tls megaraid_sas i2c_algo_bit psample wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mst_pci] CPU: 44 PID: 16136 Comm: kworker/44:3 Kdump: loaded Tainted: GOE 5.15.0-20240509.el8uek.uek7_u3_update_v6.6_ipsec_bf.x86_64 #2 Hardware name: Dell Inc. PowerEdge R7525/074H08, BIOS 2.0.3 01/15/2021 Workqueue: events xfrm_state_gc_task RIP: 0010:down_read+0x75/0x94 Code: 00 48 8b 45 08 65 48 8b 14 25 80 fc 01 00 83 e0 02 48 09 d0 48 83 c8 01 48 89 45 08 5d 31 c0 89 c2 89 c6 89 c7 e9 cb 88 3b 00 <0f> 0b 48 8b 45 08 a8 01 74 b2 a8 02 75 ae 48 89 c2 48 83 ca 02 f0 RSP: 0018:ffffb26387773da8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa08b658af900 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ff886bc5e1366f2f RDI: 0000000000000000 RBP: ffffa08b658af940 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0a9bfb31540 R13: ffffa0a9bfb37900 R14: 0000000000000000 R15: ffffa0a9bfb37905 FS: 0000000000000000(0000) GS:ffffa0a9bfb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a45ed814e8 CR3: 000000109038a000 CR4: 0000000000350ee0 Call Trace: <TASK> ? show_trace_log_lvl+0x1d6/0x2f9 ? show_trace_log_lvl+0x1d6/0x2f9 ? mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core] ? down_read+0x75/0x94 ? __warn+0x80/0x113 ? down_read+0x75/0x94 ? report_bug+0xa4/0x11d ? handle_bug+0x35/0x8b ? exc_invalid_op+0x14/0x75 ? asm_exc_invalid_op+0x16/0x1b ? down_read+0x75/0x94 ? down_read+0xe/0x94 mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core] mlx5_ipsec_fs_roce_tx_destroy+0xb1/0x130 [mlx5_core] tx_destroy+0x1b/0xc0 [mlx5_core] tx_ft_put+0x53/0xc0 [mlx5_core] mlx5e_xfrm_free_state+0x45/0x90 [mlx5_core] ___xfrm_state_destroy+0x10f/0x1a2 xfrm_state_gc_task+0x81/0xa9 process_one_work+0x1f1/0x3c6 worker_thread+0x53/0x3e4 ? process_one_work.cold+0x46/0x3c kthread+0x127/0x144 ? set_kthread_struct+0x60/0x52 ret_from_fork+0x22/0x2d </TASK> ---[ end trace 5ef7896144d398e1 ]--- |
| CVE-2024-45016 | In the Linux kernel, the following vulnerability has been resolved: netem: fix return value if duplicate enqueue fails There is a bug in netem_enqueue() introduced by commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") that can lead to a use-after-free. This commit made netem_enqueue() always return NET_XMIT_SUCCESS when a packet is duplicated, which can cause the parent qdisc's q.qlen to be mistakenly incremented. When this happens qlen_notify() may be skipped on the parent during destruction, leaving a dangling pointer for some classful qdiscs like DRR. There are two ways for the bug happen: - If the duplicated packet is dropped by rootq->enqueue() and then the original packet is also dropped. - If rootq->enqueue() sends the duplicated packet to a different qdisc and the original packet is dropped. In both cases NET_XMIT_SUCCESS is returned even though no packets are enqueued at the netem qdisc. The fix is to defer the enqueue of the duplicate packet until after the original packet has been guaranteed to return NET_XMIT_SUCCESS. |
| CVE-2024-45015 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: move dpu_encoder's connector assignment to atomic_enable() For cases where the crtc's connectors_changed was set without enable/active getting toggled , there is an atomic_enable() call followed by an atomic_disable() but without an atomic_mode_set(). This results in a NULL ptr access for the dpu_encoder_get_drm_fmt() call in the atomic_enable() as the dpu_encoder's connector was cleared in the atomic_disable() but not re-assigned as there was no atomic_mode_set() call. Fix the NULL ptr access by moving the assignment for atomic_enable() and also use drm_atomic_get_new_connector_for_encoder() to get the connector from the atomic_state. Patchwork: https://patchwork.freedesktop.org/patch/606729/ |
| CVE-2024-45014 | In the Linux kernel, the following vulnerability has been resolved: s390/boot: Avoid possible physmem_info segment corruption When physical memory for the kernel image is allocated it does not consider extra memory required for offsetting the image start to match it with the lower 20 bits of KASLR virtual base address. That might lead to kernel access beyond its memory range. |
| CVE-2024-45013 | In the Linux kernel, the following vulnerability has been resolved: nvme: move stopping keep-alive into nvme_uninit_ctrl() Commit 4733b65d82bd ("nvme: start keep-alive after admin queue setup") moves starting keep-alive from nvme_start_ctrl() into nvme_init_ctrl_finish(), but don't move stopping keep-alive into nvme_uninit_ctrl(), so keep-alive work can be started and keep pending after failing to start controller, finally use-after-free is triggered if nvme host driver is unloaded. This patch fixes kernel panic when running nvme/004 in case that connection failure is triggered, by moving stopping keep-alive into nvme_uninit_ctrl(). This way is reasonable because keep-alive is now started in nvme_init_ctrl_finish(). |
| CVE-2024-45012 | In the Linux kernel, the following vulnerability has been resolved: nouveau/firmware: use dma non-coherent allocator Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup, when the iommu is enabled: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 Fix this by using the non-coherent allocator instead, I think there might be a better answer to this, but it involve ripping up some of APIs using sg lists. |
| CVE-2024-45011 | In the Linux kernel, the following vulnerability has been resolved: char: xillybus: Check USB endpoints when probing device Ensure, as the driver probes the device, that all endpoints that the driver may attempt to access exist and are of the correct type. All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at address 1. This is verified in xillyusb_setup_base_eps(). On top of that, a XillyUSB device may have additional Bulk OUT endpoints. The information about these endpoints' addresses is deduced from a data structure (the IDT) that the driver fetches from the device while probing it. These endpoints are checked in setup_channels(). A XillyUSB device never has more than one IN endpoint, as all data towards the host is multiplexed in this single Bulk IN endpoint. This is why setup_channels() only checks OUT endpoints. |
| CVE-2024-45010 | In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only mark 'subflow' endp as available Adding the following warning ... WARN_ON_ONCE(msk->pm.local_addr_used == 0) ... before decrementing the local_addr_used counter helped to find a bug when running the "remove single address" subtest from the mptcp_join.sh selftests. Removing a 'signal' endpoint will trigger the removal of all subflows linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used counter, which is wrong in this case because this counter is linked to 'subflow' endpoints, and here it is a 'signal' endpoint that is being removed. Now, the counter is decremented, only if the ID is being used outside of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and if the ID is not 0 -- local_addr_used is not taking into account these ones. This marking of the ID as being available, and the decrement is done no matter if a subflow using this ID is currently available, because the subflow could have been closed before. |
| CVE-2024-45009 | In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only decrement add_addr_accepted for MPJ req Adding the following warning ... WARN_ON_ONCE(msk->pm.add_addr_accepted == 0) ... before decrementing the add_addr_accepted counter helped to find a bug when running the "remove single subflow" subtest from the mptcp_join.sh selftest. Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the subflow closure. Before this patch, and upon the reception of the RM_ADDR, the other peer will then try to decrement this add_addr_accepted. That's not correct because the attached subflows have not been created upon the reception of an ADD_ADDR. A way to solve that is to decrement the counter only if the attached subflow was an MP_JOIN to a remote id that was not 0, and initiated by the host receiving the RM_ADDR. |
| CVE-2024-45008 | In the Linux kernel, the following vulnerability has been resolved: Input: MT - limit max slots syzbot is reporting too large allocation at input_mt_init_slots(), for num_slots is supplied from userspace using ioctl(UI_DEV_CREATE). Since nobody knows possible max slots, this patch chose 1024. |
| CVE-2024-45007 | In the Linux kernel, the following vulnerability has been resolved: char: xillybus: Don't destroy workqueue from work item running on it Triggered by a kref decrement, destroy_workqueue() may be called from within a work item for destroying its own workqueue. This illegal situation is averted by adding a module-global workqueue for exclusive use of the offending work item. Other work items continue to be queued on per-device workqueues to ensure performance. |
| CVE-2024-45006 | In the Linux kernel, the following vulnerability has been resolved: xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated. |
| CVE-2024-45005 | In the Linux kernel, the following vulnerability has been resolved: KVM: s390: fix validity interception issue when gisa is switched off We might run into a SIE validity if gisa has been disabled either via using kernel parameter "kvm.use_gisa=0" or by setting the related sysfs attribute to N (echo N >/sys/module/kvm/parameters/use_gisa). The validity is caused by an invalid value in the SIE control block's gisa designation. That happens because we pass the uninitialized gisa origin to virt_to_phys() before writing it to the gisa designation. To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0. kvm_s390_get_gisa_desc() is used to determine which gisa designation to set in the SIE control block. A value of 0 in the gisa designation disables gisa usage. The issue surfaces in the host kernel with the following kernel message as soon a new kvm guest start is attemted. kvm: unhandled validity intercept 0x1011 WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm] Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci] CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6 Hardware name: IBM 3931 A01 701 (LPAR) Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm]) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000 000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff 000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412 000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960 Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4 000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70 #000003d93deb011e: af000000 mc 0,0 >000003d93deb0122: a728ffea lhi %r2,-22 000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e 000003d93deb012a: 9101f0b0 tm 176(%r15),1 000003d93deb012e: a774fe48 brc 7,000003d93deafdbe 000003d93deb0132: 40a0f0ae sth %r10,174(%r15) Call Trace: [<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm] ([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]) [<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm] [<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm] [<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm] [<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm] [<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70 [<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0 [<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0 [<000003d9be0f9a90>] system_call+0x70/0x98 Last Breaking-Event-Address: [<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0 |
| CVE-2024-45004 | In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix leak of blob encryption key Trusted keys unseal the key blob on load, but keep the sealed payload in the blob field so that every subsequent read (export) will simply convert this field to hex and send it to userspace. With DCP-based trusted keys, we decrypt the blob encryption key (BEK) in the Kernel due hardware limitations and then decrypt the blob payload. BEK decryption is done in-place which means that the trusted key blob field is modified and it consequently holds the BEK in plain text. Every subsequent read of that key thus send the plain text BEK instead of the encrypted BEK to userspace. This issue only occurs when importing a trusted DCP-based key and then exporting it again. This should rarely happen as the common use cases are to either create a new trusted key and export it, or import a key blob and then just use it without exporting it again. Fix this by performing BEK decryption and encryption in a dedicated buffer. Further always wipe the plain text BEK buffer to prevent leaking the key via uninitialized memory. |
| CVE-2024-45003 | In the Linux kernel, the following vulnerability has been resolved: vfs: Don't evict inode under the inode lru traversing context The inode reclaiming process(See function prune_icache_sb) collects all reclaimable inodes and mark them with I_FREEING flag at first, at that time, other processes will be stuck if they try getting these inodes (See function find_inode_fast), then the reclaiming process destroy the inodes by function dispose_list(). Some filesystems(eg. ext4 with ea_inode feature, ubifs with xattr) may do inode lookup in the inode evicting callback function, if the inode lookup is operated under the inode lru traversing context, deadlock problems may happen. Case 1: In function ext4_evict_inode(), the ea inode lookup could happen if ea_inode feature is enabled, the lookup process will be stuck under the evicting context like this: 1. File A has inode i_reg and an ea inode i_ea 2. getfattr(A, xattr_buf) // i_ea is added into lru // lru->i_ea 3. Then, following three processes running like this: PA PB echo 2 > /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // i_reg is added into lru, lru->i_ea->i_reg prune_icache_sb list_lru_walk_one inode_lru_isolate i_ea->i_state |= I_FREEING // set inode state inode_lru_isolate __iget(i_reg) spin_unlock(&i_reg->i_lock) spin_unlock(lru_lock) rm file A i_reg->nlink = 0 iput(i_reg) // i_reg->nlink is 0, do evict ext4_evict_inode ext4_xattr_delete_inode ext4_xattr_inode_dec_ref_all ext4_xattr_inode_iget ext4_iget(i_ea->i_ino) iget_locked find_inode_fast __wait_on_freeing_inode(i_ea) ----→ AA deadlock dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&i_ea->i_state) Case 2: In deleted inode writing function ubifs_jnl_write_inode(), file deleting process holds BASEHD's wbuf->io_mutex while getting the xattr inode, which could race with inode reclaiming process(The reclaiming process could try locking BASEHD's wbuf->io_mutex in inode evicting function), then an ABBA deadlock problem would happen as following: 1. File A has inode ia and a xattr(with inode ixa), regular file B has inode ib and a xattr. 2. getfattr(A, xattr_buf) // ixa is added into lru // lru->ixa 3. Then, following three processes running like this: PA PB PC echo 2 > /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // ib and ia are added into lru, lru->ixa->ib->ia prune_icache_sb list_lru_walk_one inode_lru_isolate ixa->i_state |= I_FREEING // set inode state inode_lru_isolate __iget(ib) spin_unlock(&ib->i_lock) spin_unlock(lru_lock) rm file B ib->nlink = 0 rm file A iput(ia) ubifs_evict_inode(ia) ubifs_jnl_delete_inode(ia) ubifs_jnl_write_inode(ia) make_reservation(BASEHD) // Lock wbuf->io_mutex ubifs_iget(ixa->i_ino) iget_locked find_inode_fast __wait_on_freeing_inode(ixa) | iput(ib) // ib->nlink is 0, do evict | ubifs_evict_inode | ubifs_jnl_delete_inode(ib) ↓ ubifs_jnl_write_inode ABBA deadlock ←-----make_reservation(BASEHD) dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&ixa->i_state) Fix the possible deadlock by using new inode state flag I_LRU_ISOLATING to pin the inode in memory while inode_lru_isolate( ---truncated--- |
| CVE-2024-45002 | In the Linux kernel, the following vulnerability has been resolved: rtla/osnoise: Prevent NULL dereference in error handling If the "tool->data" allocation fails then there is no need to call osnoise_free_top() and, in fact, doing so will lead to a NULL dereference. |
| CVE-2024-45001 | In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix RX buf alloc_size alignment and atomic op panic The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment is affected by the alloc_size passed into napi_build_skb(). The size needs to be aligned properly for better performance and atomic operations. Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic operations may panic on the skb_shinfo(skb)->dataref due to alignment fault. To fix this bug, add proper alignment to the alloc_size calculation. Sample panic info: [ 253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce [ 253.300900] Mem abort info: [ 253.301760] ESR = 0x0000000096000021 [ 253.302825] EC = 0x25: DABT (current EL), IL = 32 bits [ 253.304268] SET = 0, FnV = 0 [ 253.305172] EA = 0, S1PTW = 0 [ 253.306103] FSC = 0x21: alignment fault Call trace: __skb_clone+0xfc/0x198 skb_clone+0x78/0xe0 raw6_local_deliver+0xfc/0x228 ip6_protocol_deliver_rcu+0x80/0x500 ip6_input_finish+0x48/0x80 ip6_input+0x48/0xc0 ip6_sublist_rcv_finish+0x50/0x78 ip6_sublist_rcv+0x1cc/0x2b8 ipv6_list_rcv+0x100/0x150 __netif_receive_skb_list_core+0x180/0x220 netif_receive_skb_list_internal+0x198/0x2a8 __napi_poll+0x138/0x250 net_rx_action+0x148/0x330 handle_softirqs+0x12c/0x3a0 |
| CVE-2024-45000 | In the Linux kernel, the following vulnerability has been resolved: fs/netfs/fscache_cookie: add missing "n_accesses" check This fixes a NULL pointer dereference bug due to a data race which looks like this: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 33 PID: 16573 Comm: kworker/u97:799 Not tainted 6.8.7-cm4all1-hp+ #43 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018 Workqueue: events_unbound netfs_rreq_write_to_cache_work RIP: 0010:cachefiles_prepare_write+0x30/0xa0 Code: 57 41 56 45 89 ce 41 55 49 89 cd 41 54 49 89 d4 55 53 48 89 fb 48 83 ec 08 48 8b 47 08 48 83 7f 10 00 48 89 34 24 48 8b 68 20 <48> 8b 45 08 4c 8b 38 74 45 49 8b 7f 50 e8 4e a9 b0 ff 48 8b 73 10 RSP: 0018:ffffb4e78113bde0 EFLAGS: 00010286 RAX: ffff976126be6d10 RBX: ffff97615cdb8438 RCX: 0000000000020000 RDX: ffff97605e6c4c68 RSI: ffff97605e6c4c60 RDI: ffff97615cdb8438 RBP: 0000000000000000 R08: 0000000000278333 R09: 0000000000000001 R10: ffff97605e6c4600 R11: 0000000000000001 R12: ffff97605e6c4c68 R13: 0000000000020000 R14: 0000000000000001 R15: ffff976064fe2c00 FS: 0000000000000000(0000) GS:ffff9776dfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000005942c002 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x15d/0x440 ? search_module_extables+0xe/0x40 ? fixup_exception+0x22/0x2f0 ? exc_page_fault+0x5f/0x100 ? asm_exc_page_fault+0x22/0x30 ? cachefiles_prepare_write+0x30/0xa0 netfs_rreq_write_to_cache_work+0x135/0x2e0 process_one_work+0x137/0x2c0 worker_thread+0x2e9/0x400 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Modules linked in: CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- This happened because fscache_cookie_state_machine() was slow and was still running while another process invoked fscache_unuse_cookie(); this led to a fscache_cookie_lru_do_one() call, setting the FSCACHE_COOKIE_DO_LRU_DISCARD flag, which was picked up by fscache_cookie_state_machine(), withdrawing the cookie via cachefiles_withdraw_cookie(), clearing cookie->cache_priv. At the same time, yet another process invoked cachefiles_prepare_write(), which found a NULL pointer in this code line: struct cachefiles_object *object = cachefiles_cres_object(cres); The next line crashes, obviously: struct cachefiles_cache *cache = object->volume->cache; During cachefiles_prepare_write(), the "n_accesses" counter is non-zero (via fscache_begin_operation()). The cookie must not be withdrawn until it drops to zero. The counter is checked by fscache_cookie_state_machine() before switching to FSCACHE_COOKIE_STATE_RELINQUISHING and FSCACHE_COOKIE_STATE_WITHDRAWING (in "case FSCACHE_COOKIE_STATE_FAILED"), but not for FSCACHE_COOKIE_STATE_LRU_DISCARDING ("case FSCACHE_COOKIE_STATE_ACTIVE"). This patch adds the missing check. With a non-zero access counter, the function returns and the next fscache_end_cookie_access() call will queue another fscache_cookie_state_machine() call to handle the still-pending FSCACHE_COOKIE_DO_LRU_DISCARD. |
| CVE-2024-44999 | In the Linux kernel, the following vulnerability has been resolved: gtp: pull network headers in gtp_dev_xmit() syzbot/KMSAN reported use of uninit-value in get_dev_xmit() [1] We must make sure the IPv4 or Ipv6 header is pulled in skb->head before accessing fields in them. Use pskb_inet_may_pull() to fix this issue. [1] BUG: KMSAN: uninit-value in ipv6_pdp_find drivers/net/gtp.c:220 [inline] BUG: KMSAN: uninit-value in gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] BUG: KMSAN: uninit-value in gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 ipv6_pdp_find drivers/net/gtp.c:220 [inline] gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 __netdev_start_xmit include/linux/netdevice.h:4913 [inline] netdev_start_xmit include/linux/netdevice.h:4922 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x358c/0x5610 net/core/dev.c:4423 dev_queue_xmit include/linux/netdevice.h:3105 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3145 [inline] packet_sendmsg+0x90e3/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3994 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4080 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674 alloc_skb include/linux/skbuff.h:1320 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6526 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2815 packet_alloc_skb net/packet/af_packet.c:2994 [inline] packet_snd net/packet/af_packet.c:3088 [inline] packet_sendmsg+0x749c/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 7115 Comm: syz.1.515 Not tainted 6.11.0-rc1-syzkaller-00043-g94ede2a3e913 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 |
| CVE-2024-44998 | In the Linux kernel, the following vulnerability has been resolved: atm: idt77252: prevent use after free in dequeue_rx() We can't dereference "skb" after calling vcc->push() because the skb is released. |
| CVE-2024-44997 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_wed: fix use-after-free panic in mtk_wed_setup_tc_block_cb() When there are multiple ap interfaces on one band and with WED on, turning the interface down will cause a kernel panic on MT798X. Previously, cb_priv was freed in mtk_wed_setup_tc_block() without marking NULL,and mtk_wed_setup_tc_block_cb() didn't check the value, too. Assign NULL after free cb_priv in mtk_wed_setup_tc_block() and check NULL in mtk_wed_setup_tc_block_cb(). ---------- Unable to handle kernel paging request at virtual address 0072460bca32b4f5 Call trace: mtk_wed_setup_tc_block_cb+0x4/0x38 0xffffffc0794084bc tcf_block_playback_offloads+0x70/0x1e8 tcf_block_unbind+0x6c/0xc8 ... --------- |
| CVE-2024-44996 | In the Linux kernel, the following vulnerability has been resolved: vsock: fix recursive ->recvmsg calls After a vsock socket has been added to a BPF sockmap, its prot->recvmsg has been replaced with vsock_bpf_recvmsg(). Thus the following recursiion could happen: vsock_bpf_recvmsg() -> __vsock_recvmsg() -> vsock_connectible_recvmsg() -> prot->recvmsg() -> vsock_bpf_recvmsg() again We need to fix it by calling the original ->recvmsg() without any BPF sockmap logic in __vsock_recvmsg(). |
| CVE-2024-44995 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix a deadlock problem when config TC during resetting When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start │ ▼ ...... setup tc │ │ ▼ ▼ DOWN: napi_disable() napi_disable()(skip) │ │ │ ▼ ▼ ...... ...... │ │ ▼ │ napi_enable() │ ▼ UINIT: netif_napi_del() │ ▼ ...... │ ▼ INIT: netif_napi_add() │ ▼ ...... global reset start │ │ ▼ ▼ UP: napi_enable()(skip) ...... │ │ ▼ ▼ ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it. |
| CVE-2024-44994 | In the Linux kernel, the following vulnerability has been resolved: iommu: Restore lost return in iommu_report_device_fault() When iommu_report_device_fault gets called with a partial fault it is supposed to collect the fault into the group and then return. Instead the return was accidently deleted which results in trying to process the fault and an eventual crash. Deleting the return was a typo, put it back. |
| CVE-2024-44993 | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix out-of-bounds read in `v3d_csd_job_run()` When enabling UBSAN on Raspberry Pi 5, we get the following warning: [ 387.894977] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/v3d/v3d_sched.c:320:3 [ 387.903868] index 7 is out of range for type '__u32 [7]' [ 387.909692] CPU: 0 PID: 1207 Comm: kworker/u16:2 Tainted: G WC 6.10.3-v8-16k-numa #151 [ 387.919166] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 387.925961] Workqueue: v3d_csd drm_sched_run_job_work [gpu_sched] [ 387.932525] Call trace: [ 387.935296] dump_backtrace+0x170/0x1b8 [ 387.939403] show_stack+0x20/0x38 [ 387.942907] dump_stack_lvl+0x90/0xd0 [ 387.946785] dump_stack+0x18/0x28 [ 387.950301] __ubsan_handle_out_of_bounds+0x98/0xd0 [ 387.955383] v3d_csd_job_run+0x3a8/0x438 [v3d] [ 387.960707] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched] [ 387.966862] process_one_work+0x62c/0xb48 [ 387.971296] worker_thread+0x468/0x5b0 [ 387.975317] kthread+0x1c4/0x1e0 [ 387.978818] ret_from_fork+0x10/0x20 [ 387.983014] ---[ end trace ]--- This happens because the UAPI provides only seven configuration registers and we are reading the eighth position of this u32 array. Therefore, fix the out-of-bounds read in `v3d_csd_job_run()` by accessing only seven positions on the '__u32 [7]' array. The eighth register exists indeed on V3D 7.1, but it isn't currently used. That being so, let's guarantee that it remains unused and add a note that it could be set in a future patch. |
| CVE-2024-44992 | In the Linux kernel, the following vulnerability has been resolved: smb/client: avoid possible NULL dereference in cifs_free_subrequest() Clang static checker (scan-build) warning: cifsglob.h:line 890, column 3 Access to field 'ops' results in a dereference of a null pointer. Commit 519be989717c ("cifs: Add a tracepoint to track credits involved in R/W requests") adds a check for 'rdata->server', and let clang throw this warning about NULL dereference. When 'rdata->credits.value != 0 && rdata->server == NULL' happens, add_credits_and_wake_if() will call rdata->server->ops->add_credits(). This will cause NULL dereference problem. Add a check for 'rdata->server' to avoid NULL dereference. |
| CVE-2024-44991 | In the Linux kernel, the following vulnerability has been resolved: tcp: prevent concurrent execution of tcp_sk_exit_batch Its possible that two threads call tcp_sk_exit_batch() concurrently, once from the cleanup_net workqueue, once from a task that failed to clone a new netns. In the latter case, error unwinding calls the exit handlers in reverse order for the 'failed' netns. tcp_sk_exit_batch() calls tcp_twsk_purge(). Problem is that since commit b099ce2602d8 ("net: Batch inet_twsk_purge"), this function picks up twsk in any dying netns, not just the one passed in via exit_batch list. This means that the error unwind of setup_net() can "steal" and destroy timewait sockets belonging to the exiting netns. This allows the netns exit worker to proceed to call WARN_ON_ONCE(!refcount_dec_and_test(&net->ipv4.tcp_death_row.tw_refcount)); without the expected 1 -> 0 transition, which then splats. At same time, error unwind path that is also running inet_twsk_purge() will splat as well: WARNING: .. at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 ... refcount_dec include/linux/refcount.h:351 [inline] inet_twsk_kill+0x758/0x9c0 net/ipv4/inet_timewait_sock.c:70 inet_twsk_deschedule_put net/ipv4/inet_timewait_sock.c:221 inet_twsk_purge+0x725/0x890 net/ipv4/inet_timewait_sock.c:304 tcp_sk_exit_batch+0x1c/0x170 net/ipv4/tcp_ipv4.c:3522 ops_exit_list+0x128/0x180 net/core/net_namespace.c:178 setup_net+0x714/0xb40 net/core/net_namespace.c:375 copy_net_ns+0x2f0/0x670 net/core/net_namespace.c:508 create_new_namespaces+0x3ea/0xb10 kernel/nsproxy.c:110 ... because refcount_dec() of tw_refcount unexpectedly dropped to 0. This doesn't seem like an actual bug (no tw sockets got lost and I don't see a use-after-free) but as erroneous trigger of debug check. Add a mutex to force strict ordering: the task that calls tcp_twsk_purge() blocks other task from doing final _dec_and_test before mutex-owner has removed all tw sockets of dying netns. |
| CVE-2024-44990 | In the Linux kernel, the following vulnerability has been resolved: bonding: fix null pointer deref in bond_ipsec_offload_ok We must check if there is an active slave before dereferencing the pointer. |
| CVE-2024-44989 | In the Linux kernel, the following vulnerability has been resolved: bonding: fix xfrm real_dev null pointer dereference We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: <TASK> kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80 |
| CVE-2024-44988 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: Fix out-of-bound access If an ATU violation was caused by a CPU Load operation, the SPID could be larger than DSA_MAX_PORTS (the size of mv88e6xxx_chip.ports[] array). |
| CVE-2024-44987 | In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent UAF in ip6_send_skb() syzbot reported an UAF in ip6_send_skb() [1] After ip6_local_out() has returned, we no longer can safely dereference rt, unless we hold rcu_read_lock(). A similar issue has been fixed in commit a688caa34beb ("ipv6: take rcu lock in rawv6_send_hdrinc()") Another potential issue in ip6_finish_output2() is handled in a separate patch. [1] BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530 CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62cc9b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 vfs_writev+0x37c/0xbb0 fs/read_write.c:971 do_writev+0x1b1/0x350 fs/read_write.c:1018 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f936bf79e79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79 RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8 </TASK> Allocated by task 6530: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044 dst_alloc+0x12b/0x190 net/core/dst.c:89 ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670 make_blackhole net/xfrm/xfrm_policy.c:3120 [inline] xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313 ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257 rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kmem_cache_free+0x145/0x350 mm/slub.c:4548 dst_destroy+0x2ac/0x460 net/core/dst.c:124 rcu_do_batch kernel/rcu/tree.c:2569 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree. ---truncated--- |
| CVE-2024-44986 | In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in ip6_finish_output2() If skb_expand_head() returns NULL, skb has been freed and associated dst/idev could also have been freed. We need to hold rcu_read_lock() to make sure the dst and associated idev are alive. |
| CVE-2024-44985 | In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible UAF in ip6_xmit() If skb_expand_head() returns NULL, skb has been freed and the associated dst/idev could also have been freed. We must use rcu_read_lock() to prevent a possible UAF. |
| CVE-2024-44984 | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix double DMA unmapping for XDP_REDIRECT Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT code path. This should have been removed when we let the page pool handle the DMA mapping. This bug causes the warning: WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100 CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G W 6.8.0-1010-gcp #11-Ubuntu Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024 RIP: 0010:iommu_dma_unmap_page+0xd5/0x100 Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000 R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0 ? show_regs+0x6d/0x80 ? __warn+0x89/0x150 ? iommu_dma_unmap_page+0xd5/0x100 ? report_bug+0x16a/0x190 ? handle_bug+0x51/0xa0 ? exc_invalid_op+0x18/0x80 ? iommu_dma_unmap_page+0xd5/0x100 ? iommu_dma_unmap_page+0x35/0x100 dma_unmap_page_attrs+0x55/0x220 ? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f bnxt_rx_xdp+0x237/0x520 [bnxt_en] bnxt_rx_pkt+0x640/0xdd0 [bnxt_en] __bnxt_poll_work+0x1a1/0x3d0 [bnxt_en] bnxt_poll+0xaa/0x1e0 [bnxt_en] __napi_poll+0x33/0x1e0 net_rx_action+0x18a/0x2f0 |
| CVE-2024-44983 | In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: validate vlan header Ensure there is sufficient room to access the protocol field of the VLAN header, validate it once before the flowtable lookup. ===================================================== BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5440 [inline] |
| CVE-2024-44982 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: cleanup FB if dpu_format_populate_layout fails If the dpu_format_populate_layout() fails, then FB is prepared, but not cleaned up. This ends up leaking the pin_count on the GEM object and causes a splat during DRM file closure: msm_obj->pin_count WARNING: CPU: 2 PID: 569 at drivers/gpu/drm/msm/msm_gem.c:121 update_lru_locked+0xc4/0xcc [...] Call trace: update_lru_locked+0xc4/0xcc put_pages+0xac/0x100 msm_gem_free_object+0x138/0x180 drm_gem_object_free+0x1c/0x30 drm_gem_object_handle_put_unlocked+0x108/0x10c drm_gem_object_release_handle+0x58/0x70 idr_for_each+0x68/0xec drm_gem_release+0x28/0x40 drm_file_free+0x174/0x234 drm_release+0xb0/0x160 __fput+0xc0/0x2c8 __fput_sync+0x50/0x5c __arm64_sys_close+0x38/0x7c invoke_syscall+0x48/0x118 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x4c/0x120 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 irq event stamp: 129818 hardirqs last enabled at (129817): [<ffffa5f6d953fcc0>] console_unlock+0x118/0x124 hardirqs last disabled at (129818): [<ffffa5f6da7dcf04>] el1_dbg+0x24/0x8c softirqs last enabled at (129808): [<ffffa5f6d94afc18>] handle_softirqs+0x4c8/0x4e8 softirqs last disabled at (129785): [<ffffa5f6d94105e4>] __do_softirq+0x14/0x20 Patchwork: https://patchwork.freedesktop.org/patch/600714/ |
| CVE-2024-44981 | In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix UBSAN 'subtraction overflow' error in shift_and_mask() UBSAN reports the following 'subtraction overflow' error when booting in a virtual machine on Android: | Internal error: UBSAN: integer subtraction overflow: 00000000f2005515 [#1] PREEMPT SMP | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-00006-g3cbe9e5abd46-dirty #4 | Hardware name: linux,dummy-virt (DT) | pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : cancel_delayed_work+0x34/0x44 | lr : cancel_delayed_work+0x2c/0x44 | sp : ffff80008002ba60 | x29: ffff80008002ba60 x28: 0000000000000000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: 0000000000000000 x22: 0000000000000000 x21: ffff1f65014cd3c0 | x20: ffffc0e84c9d0da0 x19: ffffc0e84cab3558 x18: ffff800080009058 | x17: 00000000247ee1f8 x16: 00000000247ee1f8 x15: 00000000bdcb279d | x14: 0000000000000001 x13: 0000000000000075 x12: 00000a0000000000 | x11: ffff1f6501499018 x10: 00984901651fffff x9 : ffff5e7cc35af000 | x8 : 0000000000000001 x7 : 3d4d455453595342 x6 : 000000004e514553 | x5 : ffff1f6501499265 x4 : ffff1f650ff60b10 x3 : 0000000000000620 | x2 : ffff80008002ba78 x1 : 0000000000000000 x0 : 0000000000000000 | Call trace: | cancel_delayed_work+0x34/0x44 | deferred_probe_extend_timeout+0x20/0x70 | driver_register+0xa8/0x110 | __platform_driver_register+0x28/0x3c | syscon_init+0x24/0x38 | do_one_initcall+0xe4/0x338 | do_initcall_level+0xac/0x178 | do_initcalls+0x5c/0xa0 | do_basic_setup+0x20/0x30 | kernel_init_freeable+0x8c/0xf8 | kernel_init+0x28/0x1b4 | ret_from_fork+0x10/0x20 | Code: f9000fbf 97fffa2f 39400268 37100048 (d42aa2a0) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: UBSAN: integer subtraction overflow: Fatal exception This is due to shift_and_mask() using a signed immediate to construct the mask and being called with a shift of 31 (WORK_OFFQ_POOL_SHIFT) so that it ends up decrementing from INT_MIN. Use an unsigned constant '1U' to generate the mask in shift_and_mask(). |
| CVE-2024-44980 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix opregion leak Being part o the display, ideally the setup and cleanup would be done by display itself. However this is a bigger refactor that needs to be done on both i915 and xe. For now, just fix the leak: unreferenced object 0xffff8881a0300008 (size 192): comm "modprobe", pid 4354, jiffies 4295647021 hex dump (first 32 bytes): 00 00 87 27 81 88 ff ff 18 80 9b 00 00 c9 ff ff ...'............ 18 81 9b 00 00 c9 ff ff 00 00 00 00 00 00 00 00 ................ backtrace (crc 99260e31): [<ffffffff823ce65b>] kmemleak_alloc+0x4b/0x80 [<ffffffff81493be2>] kmalloc_trace_noprof+0x312/0x3d0 [<ffffffffa1345679>] intel_opregion_setup+0x89/0x700 [xe] [<ffffffffa125bfaf>] xe_display_init_noirq+0x2f/0x90 [xe] [<ffffffffa1199ec3>] xe_device_probe+0x7a3/0xbf0 [xe] [<ffffffffa11f3713>] xe_pci_probe+0x333/0x5b0 [xe] [<ffffffff81af6be8>] local_pci_probe+0x48/0xb0 [<ffffffff81af8778>] pci_device_probe+0xc8/0x280 [<ffffffff81d09048>] really_probe+0xf8/0x390 [<ffffffff81d0937a>] __driver_probe_device+0x8a/0x170 [<ffffffff81d09503>] driver_probe_device+0x23/0xb0 [<ffffffff81d097b7>] __driver_attach+0xc7/0x190 [<ffffffff81d0628d>] bus_for_each_dev+0x7d/0xd0 [<ffffffff81d0851e>] driver_attach+0x1e/0x30 [<ffffffff81d07ac7>] bus_add_driver+0x117/0x250 (cherry picked from commit 6f4e43a2f771b737d991142ec4f6d4b7ff31fbb4) |
| CVE-2024-44979 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix missing workqueue destroy in xe_gt_pagefault On driver reload we never free up the memory for the pagefault and access counter workqueues. Add those destroy calls here. (cherry picked from commit 7586fc52b14e0b8edd0d1f8a434e0de2078b7b2b) |
| CVE-2024-44978 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Free job before xe_exec_queue_put Free job depends on job->vm being valid, the last xe_exec_queue_put can destroy the VM. Prevent UAF by freeing job before xe_exec_queue_put. (cherry picked from commit 32a42c93b74c8ca6d0915ea3eba21bceff53042f) |
| CVE-2024-44977 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Validate TA binary size Add TA binary size validation to avoid OOB write. (cherry picked from commit c0a04e3570d72aaf090962156ad085e37c62e442) |
| CVE-2024-44976 | In the Linux kernel, the following vulnerability has been resolved: ata: pata_macio: Fix DMA table overflow Kolbjørn and Jonáš reported that their 32-bit PowerMacs were crashing in pata-macio since commit 09fe2bfa6b83 ("ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K"). For example: kernel BUG at drivers/ata/pata_macio.c:544! Oops: Exception in kernel mode, sig: 5 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 DEBUG_PAGEALLOC PowerMac ... NIP pata_macio_qc_prep+0xf4/0x190 LR pata_macio_qc_prep+0xfc/0x190 Call Trace: 0xc1421660 (unreliable) ata_qc_issue+0x14c/0x2d4 __ata_scsi_queuecmd+0x200/0x53c ata_scsi_queuecmd+0x50/0xe0 scsi_queue_rq+0x788/0xb1c __blk_mq_issue_directly+0x58/0xf4 blk_mq_plug_issue_direct+0x8c/0x1b4 blk_mq_flush_plug_list.part.0+0x584/0x5e0 __blk_flush_plug+0xf8/0x194 __submit_bio+0x1b8/0x2e0 submit_bio_noacct_nocheck+0x230/0x304 btrfs_work_helper+0x200/0x338 process_one_work+0x1a8/0x338 worker_thread+0x364/0x4c0 kthread+0x100/0x104 start_kernel_thread+0x10/0x14 That commit increased max_segment_size to 64KB, with the justification that the SCSI core was already using that size when PAGE_SIZE == 64KB, and that there was existing logic to split over-sized requests. However with a sufficiently large request, the splitting logic causes each sg to be split into two commands in the DMA table, leading to overflow of the DMA table, triggering the BUG_ON(). With default settings the bug doesn't trigger, because the request size is limited by max_sectors_kb == 1280, however max_sectors_kb can be increased, and apparently some distros do that by default using udev rules. Fix the bug for 4KB kernels by reverting to the old max_segment_size. For 64KB kernels the sg_tablesize needs to be halved, to allow for the possibility that each sg will be split into two. |
| CVE-2024-44975 | In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: fix panic caused by partcmd_update We find a bug as below: BUG: unable to handle page fault for address: 00000003 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 358 Comm: bash Tainted: G W I 6.6.0-10893-g60d6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/4 RIP: 0010:partition_sched_domains_locked+0x483/0x600 Code: 01 48 85 d2 74 0d 48 83 05 29 3f f8 03 01 f3 48 0f bc c2 89 c0 48 9 RSP: 0018:ffffc90000fdbc58 EFLAGS: 00000202 RAX: 0000000100000003 RBX: ffff888100b3dfa0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000002fe80 RBP: ffff888100b3dfb0 R08: 0000000000000001 R09: 0000000000000000 R10: ffffc90000fdbcb0 R11: 0000000000000004 R12: 0000000000000002 R13: ffff888100a92b48 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f44a5425740(0000) GS:ffff888237d80000(0000) knlGS:0000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000100030973 CR3: 000000010722c000 CR4: 00000000000006e0 Call Trace: <TASK> ? show_regs+0x8c/0xa0 ? __die_body+0x23/0xa0 ? __die+0x3a/0x50 ? page_fault_oops+0x1d2/0x5c0 ? partition_sched_domains_locked+0x483/0x600 ? search_module_extables+0x2a/0xb0 ? search_exception_tables+0x67/0x90 ? kernelmode_fixup_or_oops+0x144/0x1b0 ? __bad_area_nosemaphore+0x211/0x360 ? up_read+0x3b/0x50 ? bad_area_nosemaphore+0x1a/0x30 ? exc_page_fault+0x890/0xd90 ? __lock_acquire.constprop.0+0x24f/0x8d0 ? __lock_acquire.constprop.0+0x24f/0x8d0 ? asm_exc_page_fault+0x26/0x30 ? partition_sched_domains_locked+0x483/0x600 ? partition_sched_domains_locked+0xf0/0x600 rebuild_sched_domains_locked+0x806/0xdc0 update_partition_sd_lb+0x118/0x130 cpuset_write_resmask+0xffc/0x1420 cgroup_file_write+0xb2/0x290 kernfs_fop_write_iter+0x194/0x290 new_sync_write+0xeb/0x160 vfs_write+0x16f/0x1d0 ksys_write+0x81/0x180 __x64_sys_write+0x21/0x30 x64_sys_call+0x2f25/0x4630 do_syscall_64+0x44/0xb0 entry_SYSCALL_64_after_hwframe+0x78/0xe2 RIP: 0033:0x7f44a553c887 It can be reproduced with cammands: cd /sys/fs/cgroup/ mkdir test cd test/ echo +cpuset > ../cgroup.subtree_control echo root > cpuset.cpus.partition cat /sys/fs/cgroup/cpuset.cpus.effective 0-3 echo 0-3 > cpuset.cpus // taking away all cpus from root This issue is caused by the incorrect rebuilding of scheduling domains. In this scenario, test/cpuset.cpus.partition should be an invalid root and should not trigger the rebuilding of scheduling domains. When calling update_parent_effective_cpumask with partcmd_update, if newmask is not null, it should recheck newmask whether there are cpus is available for parect/cs that has tasks. |
| CVE-2024-44974 | In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: avoid possible UaF when selecting endp select_local_address() and select_signal_address() both select an endpoint entry from the list inside an RCU protected section, but return a reference to it, to be read later on. If the entry is dereferenced after the RCU unlock, reading info could cause a Use-after-Free. A simple solution is to copy the required info while inside the RCU protected section to avoid any risk of UaF later. The address ID might need to be modified later to handle the ID0 case later, so a copy seems OK to deal with. |
| CVE-2024-44973 | In the Linux kernel, the following vulnerability has been resolved: mm, slub: do not call do_slab_free for kfence object In 782f8906f805 the freeing of kfence objects was moved from deep inside do_slab_free to the wrapper functions outside. This is a nice change, but unfortunately it missed one spot in __kmem_cache_free_bulk. This results in a crash like this: BUG skbuff_head_cache (Tainted: G S B E ): Padding overwritten. 0xffff88907fea0f00-0xffff88907fea0fff @offset=3840 slab_err (mm/slub.c:1129) free_to_partial_list (mm/slub.c:? mm/slub.c:4036) slab_pad_check (mm/slub.c:864 mm/slub.c:1290) check_slab (mm/slub.c:?) free_to_partial_list (mm/slub.c:3171 mm/slub.c:4036) kmem_cache_alloc_bulk (mm/slub.c:? mm/slub.c:4495 mm/slub.c:4586 mm/slub.c:4635) napi_build_skb (net/core/skbuff.c:348 net/core/skbuff.c:527 net/core/skbuff.c:549) All the other callers to do_slab_free appear to be ok. Add a kfence_free check in __kmem_cache_free_bulk to avoid the crash. |
| CVE-2024-44972 | In the Linux kernel, the following vulnerability has been resolved: btrfs: do not clear page dirty inside extent_write_locked_range() [BUG] For subpage + zoned case, the following workload can lead to rsv data leak at unmount time: # mkfs.btrfs -f -s 4k $dev # mount $dev $mnt # fsstress -w -n 8 -d $mnt -s 1709539240 0/0: fiemap - no filename 0/1: copyrange read - no filename 0/2: write - no filename 0/3: rename - no source filename 0/4: creat f0 x:0 0 0 0/4: creat add id=0,parent=-1 0/5: writev f0[259 1 0 0 0 0] [778052,113,965] 0 0/6: ioctl(FIEMAP) f0[259 1 0 0 224 887097] [1294220,2291618343991484791,0x10000] -1 0/7: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 224 887097] return 25, fallback to stat() 0/7: dwrite f0[259 1 0 0 224 887097] [696320,102400] 0 # umount $mnt The dmesg includes the following rsv leak detection warning (all call trace skipped): ------------[ cut here ]------------ WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8653 btrfs_destroy_inode+0x1e0/0x200 [btrfs] ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8654 btrfs_destroy_inode+0x1a8/0x200 [btrfs] ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8660 btrfs_destroy_inode+0x1a0/0x200 [btrfs] ---[ end trace 0000000000000000 ]--- BTRFS info (device sda): last unmount of filesystem 1b4abba9-de34-4f07-9e7f-157cf12a18d6 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 4528 at fs/btrfs/block-group.c:4434 btrfs_free_block_groups+0x338/0x500 [btrfs] ---[ end trace 0000000000000000 ]--- BTRFS info (device sda): space_info DATA has 268218368 free, is not full BTRFS info (device sda): space_info total=268435456, used=204800, pinned=0, reserved=0, may_use=12288, readonly=0 zone_unusable=0 BTRFS info (device sda): global_block_rsv: size 0 reserved 0 BTRFS info (device sda): trans_block_rsv: size 0 reserved 0 BTRFS info (device sda): chunk_block_rsv: size 0 reserved 0 BTRFS info (device sda): delayed_block_rsv: size 0 reserved 0 BTRFS info (device sda): delayed_refs_rsv: size 0 reserved 0 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 4528 at fs/btrfs/block-group.c:4434 btrfs_free_block_groups+0x338/0x500 [btrfs] ---[ end trace 0000000000000000 ]--- BTRFS info (device sda): space_info METADATA has 267796480 free, is not full BTRFS info (device sda): space_info total=268435456, used=131072, pinned=0, reserved=0, may_use=262144, readonly=0 zone_unusable=245760 BTRFS info (device sda): global_block_rsv: size 0 reserved 0 BTRFS info (device sda): trans_block_rsv: size 0 reserved 0 BTRFS info (device sda): chunk_block_rsv: size 0 reserved 0 BTRFS info (device sda): delayed_block_rsv: size 0 reserved 0 BTRFS info (device sda): delayed_refs_rsv: size 0 reserved 0 Above $dev is a tcmu-runner emulated zoned HDD, which has a max zone append size of 64K, and the system has 64K page size. [CAUSE] I have added several trace_printk() to show the events (header skipped): > btrfs_dirty_pages: r/i=5/259 dirty start=774144 len=114688 > btrfs_dirty_pages: r/i=5/259 dirty part of page=720896 off_in_page=53248 len_in_page=12288 > btrfs_dirty_pages: r/i=5/259 dirty part of page=786432 off_in_page=0 len_in_page=65536 > btrfs_dirty_pages: r/i=5/259 dirty part of page=851968 off_in_page=0 len_in_page=36864 The above lines show our buffered write has dirtied 3 pages of inode 259 of root 5: 704K 768K 832K 896K I |////I/////////////////I///////////| I 756K 868K |///| is the dirtied range using subpage bitmaps. and 'I' is the page boundary. Meanwhile all three pages (704K, 768K, 832K) have their PageDirty flag set. > btrfs_direct_write: r/i=5/259 start dio filepos=696320 len=102400 Then direct IO writ ---truncated--- |
| CVE-2024-44971 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() bcm_sf2_mdio_register() calls of_phy_find_device() and then phy_device_remove() in a loop to remove existing PHY devices. of_phy_find_device() eventually calls bus_find_device(), which calls get_device() on the returned struct device * to increment the refcount. The current implementation does not decrement the refcount, which causes memory leak. This commit adds the missing phy_device_free() call to decrement the refcount via put_device() to balance the refcount. |
| CVE-2024-44970 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: SHAMPO, Fix invalid WQ linked list unlink When all the strides in a WQE have been consumed, the WQE is unlinked from the WQ linked list (mlx5_wq_ll_pop()). For SHAMPO, it is possible to receive CQEs with 0 consumed strides for the same WQE even after the WQE is fully consumed and unlinked. This triggers an additional unlink for the same wqe which corrupts the linked list. Fix this scenario by accepting 0 sized consumed strides without unlinking the WQE again. |
| CVE-2024-44969 | In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Prevent release of buffer in I/O When a task waiting for completion of a Store Data operation is interrupted, an attempt is made to halt this operation. If this attempt fails due to a hardware or firmware problem, there is a chance that the SCLP facility might store data into buffers referenced by the original operation at a later time. Handle this situation by not releasing the referenced data buffers if the halt attempt fails. For current use cases, this might result in a leak of few pages of memory in case of a rare hardware/firmware malfunction. |
| CVE-2024-44968 | In the Linux kernel, the following vulnerability has been resolved: tick/broadcast: Move per CPU pointer access into the atomic section The recent fix for making the take over of the broadcast timer more reliable retrieves a per CPU pointer in preemptible context. This went unnoticed as compilers hoist the access into the non-preemptible region where the pointer is actually used. But of course it's valid that the compiler keeps it at the place where the code puts it which rightfully triggers: BUG: using smp_processor_id() in preemptible [00000000] code: caller is hotplug_cpu__broadcast_tick_pull+0x1c/0xc0 Move it to the actual usage site which is in a non-preemptible region. |
| CVE-2024-44967 | In the Linux kernel, the following vulnerability has been resolved: drm/mgag200: Bind I2C lifetime to DRM device Managed cleanup with devm_add_action_or_reset() will release the I2C adapter when the underlying Linux device goes away. But the connector still refers to it, so this cleanup leaves behind a stale pointer in struct drm_connector.ddc. Bind the lifetime of the I2C adapter to the connector's lifetime by using DRM's managed release. When the DRM device goes away (after the Linux device) DRM will first clean up the connector and then clean up the I2C adapter. |
| CVE-2024-44966 | In the Linux kernel, the following vulnerability has been resolved: binfmt_flat: Fix corruption when not offsetting data start Commit 04d82a6d0881 ("binfmt_flat: allow not offsetting data start") introduced a RISC-V specific variant of the FLAT format which does not allocate any space for the (obsolete) array of shared library pointers. However, it did not disable the code which initializes the array, resulting in the corruption of sizeof(long) bytes before the DATA segment, generally the end of the TEXT segment. Introduce MAX_SHARED_LIBS_UPDATE which depends on the state of CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET to guard the initialization of the shared library pointer region so that it will only be initialized if space is reserved for it. |
| CVE-2024-44965 | In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix pti_clone_pgtable() alignment assumption Guenter reported dodgy crashes on an i386-nosmp build using GCC-11 that had the form of endless traps until entry stack exhaust and then #DF from the stack guard. It turned out that pti_clone_pgtable() had alignment assumptions on the start address, notably it hard assumes start is PMD aligned. This is true on x86_64, but very much not true on i386. These assumptions can cause the end condition to malfunction, leading to a 'short' clone. Guess what happens when the user mapping has a short copy of the entry text? Use the correct increment form for addr to avoid alignment assumptions. |
| CVE-2024-44964 | In the Linux kernel, the following vulnerability has been resolved: idpf: fix memory leaks and crashes while performing a soft reset The second tagged commit introduced a UAF, as it removed restoring q_vector->vport pointers after reinitializating the structures. This is due to that all queue allocation functions are performed here with the new temporary vport structure and those functions rewrite the backpointers to the vport. Then, this new struct is freed and the pointers start leading to nowhere. But generally speaking, the current logic is very fragile. It claims to be more reliable when the system is low on memory, but in fact, it consumes two times more memory as at the moment of running this function, there are two vports allocated with their queues and vectors. Moreover, it claims to prevent the driver from running into "bad state", but in fact, any error during the rebuild leaves the old vport in the partially allocated state. Finally, if the interface is down when the function is called, it always allocates a new queue set, but when the user decides to enable the interface later on, vport_open() allocates them once again, IOW there's a clear memory leak here. Just don't allocate a new queue set when performing a reset, that solves crashes and memory leaks. Readd the old queue number and reopen the interface on rollback - that solves limbo states when the device is left disabled and/or without HW queues enabled. |
| CVE-2024-44963 | In the Linux kernel, the following vulnerability has been resolved: btrfs: do not BUG_ON() when freeing tree block after error When freeing a tree block, at btrfs_free_tree_block(), if we fail to create a delayed reference we don't deal with the error and just do a BUG_ON(). The error most likely to happen is -ENOMEM, and we have a comment mentioning that only -ENOMEM can happen, but that is not true, because in case qgroups are enabled any error returned from btrfs_qgroup_trace_extent_post() (can be -EUCLEAN or anything returned from btrfs_search_slot() for example) can be propagated back to btrfs_free_tree_block(). So stop doing a BUG_ON() and return the error to the callers and make them abort the transaction to prevent leaking space. Syzbot was triggering this, likely due to memory allocation failure injection. |
| CVE-2024-44962 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Shutdown timer and prevent rearming when driver unloading When unload the btnxpuart driver, its associated timer will be deleted. If the timer happens to be modified at this moment, it leads to the kernel call this timer even after the driver unloaded, resulting in kernel panic. Use timer_shutdown_sync() instead of del_timer_sync() to prevent rearming. panic log: Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP Modules linked in: algif_hash algif_skcipher af_alg moal(O) mlan(O) crct10dif_ce polyval_ce polyval_generic snd_soc_imx_card snd_soc_fsl_asoc_card snd_soc_imx_audmux mxc_jpeg_encdec v4l2_jpeg snd_soc_wm8962 snd_soc_fsl_micfil snd_soc_fsl_sai flexcan snd_soc_fsl_utils ap130x rpmsg_ctrl imx_pcm_dma can_dev rpmsg_char pwm_fan fuse [last unloaded: btnxpuart] CPU: 5 PID: 723 Comm: memtester Tainted: G O 6.6.23-lts-next-06207-g4aef2658ac28 #1 Hardware name: NXP i.MX95 19X19 board (DT) pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0xffff80007a2cf464 lr : call_timer_fn.isra.0+0x24/0x80 ... Call trace: 0xffff80007a2cf464 __run_timers+0x234/0x280 run_timer_softirq+0x20/0x40 __do_softirq+0x100/0x26c ____do_softirq+0x10/0x1c call_on_irq_stack+0x24/0x4c do_softirq_own_stack+0x1c/0x2c irq_exit_rcu+0xc0/0xdc el0_interrupt+0x54/0xd8 __el0_irq_handler_common+0x18/0x24 el0t_64_irq_handler+0x10/0x1c el0t_64_irq+0x190/0x194 Code: ???????? ???????? ???????? ???????? (????????) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0,c0000000,40028143,1000721b Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- |
| CVE-2024-44961 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Forward soft recovery errors to userspace As we discussed before[1], soft recovery should be forwarded to userspace, or we can get into a really bad state where apps will keep submitting hanging command buffers cascading us to a hard reset. 1: https://lore.kernel.org/all/[email protected]/ (cherry picked from commit 434967aadbbbe3ad9103cc29e9a327de20fdba01) |
| CVE-2024-44960 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: core: Check for unset descriptor Make sure the descriptor has been set before looking at maxpacket. This fixes a null pointer panic in this case. This may happen if the gadget doesn't properly set up the endpoint for the current speed, or the gadget descriptors are malformed and the descriptor for the speed/endpoint are not found. No current gadget driver is known to have this problem, but this may cause a hard-to-find bug during development of new gadgets. |
| CVE-2024-44959 | In the Linux kernel, the following vulnerability has been resolved: tracefs: Use generic inode RCU for synchronizing freeing With structure layout randomization enabled for 'struct inode' we need to avoid overlapping any of the RCU-used / initialized-only-once members, e.g. i_lru or i_sb_list to not corrupt related list traversals when making use of the rcu_head. For an unlucky structure layout of 'struct inode' we may end up with the following splat when running the ftrace selftests: [<...>] list_del corruption, ffff888103ee2cb0->next (tracefs_inode_cache+0x0/0x4e0 [slab object]) is NULL (prev is tracefs_inode_cache+0x78/0x4e0 [slab object]) [<...>] ------------[ cut here ]------------ [<...>] kernel BUG at lib/list_debug.c:54! [<...>] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [<...>] CPU: 3 PID: 2550 Comm: mount Tainted: G N 6.8.12-grsec+ #122 ed2f536ca62f28b087b90e3cc906a8d25b3ddc65 [<...>] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [<...>] RIP: 0010:[<ffffffff84656018>] __list_del_entry_valid_or_report+0x138/0x3e0 [<...>] Code: 48 b8 99 fb 65 f2 ff ff ff ff e9 03 5c d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff e9 33 5a d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff <0f> 0b 4c 89 e9 48 89 ea 48 89 ee 48 c7 c7 60 8f dd 89 31 c0 e8 2f [<...>] RSP: 0018:fffffe80416afaf0 EFLAGS: 00010283 [<...>] RAX: 0000000000000098 RBX: ffff888103ee2cb0 RCX: 0000000000000000 [<...>] RDX: ffffffff84655fe8 RSI: ffffffff89dd8b60 RDI: 0000000000000001 [<...>] RBP: ffff888103ee2cb0 R08: 0000000000000001 R09: fffffbd0082d5f25 [<...>] R10: fffffe80416af92f R11: 0000000000000001 R12: fdf99c16731d9b6d [<...>] R13: 0000000000000000 R14: ffff88819ad4b8b8 R15: 0000000000000000 [<...>] RBX: tracefs_inode_cache+0x0/0x4e0 [slab object] [<...>] RDX: __list_del_entry_valid_or_report+0x108/0x3e0 [<...>] RSI: __func__.47+0x4340/0x4400 [<...>] RBP: tracefs_inode_cache+0x0/0x4e0 [slab object] [<...>] RSP: process kstack fffffe80416afaf0+0x7af0/0x8000 [mount 2550 2550] [<...>] R09: kasan shadow of process kstack fffffe80416af928+0x7928/0x8000 [mount 2550 2550] [<...>] R10: process kstack fffffe80416af92f+0x792f/0x8000 [mount 2550 2550] [<...>] R14: tracefs_inode_cache+0x78/0x4e0 [slab object] [<...>] FS: 00006dcb380c1840(0000) GS:ffff8881e0600000(0000) knlGS:0000000000000000 [<...>] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [<...>] CR2: 000076ab72b30e84 CR3: 000000000b088004 CR4: 0000000000360ef0 shadow CR4: 0000000000360ef0 [<...>] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [<...>] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [<...>] ASID: 0003 [<...>] Stack: [<...>] ffffffff818a2315 00000000f5c856ee ffffffff896f1840 ffff888103ee2cb0 [<...>] ffff88812b6b9750 0000000079d714b6 fffffbfff1e9280b ffffffff8f49405f [<...>] 0000000000000001 0000000000000000 ffff888104457280 ffffffff8248b392 [<...>] Call Trace: [<...>] <TASK> [<...>] [<ffffffff818a2315>] ? lock_release+0x175/0x380 fffffe80416afaf0 [<...>] [<ffffffff8248b392>] list_lru_del+0x152/0x740 fffffe80416afb48 [<...>] [<ffffffff8248ba93>] list_lru_del_obj+0x113/0x280 fffffe80416afb88 [<...>] [<ffffffff8940fd19>] ? _atomic_dec_and_lock+0x119/0x200 fffffe80416afb90 [<...>] [<ffffffff8295b244>] iput_final+0x1c4/0x9a0 fffffe80416afbb8 [<...>] [<ffffffff8293a52b>] dentry_unlink_inode+0x44b/0xaa0 fffffe80416afbf8 [<...>] [<ffffffff8293fefc>] __dentry_kill+0x23c/0xf00 fffffe80416afc40 [<...>] [<ffffffff8953a85f>] ? __this_cpu_preempt_check+0x1f/0xa0 fffffe80416afc48 [<...>] [<ffffffff82949ce5>] ? shrink_dentry_list+0x1c5/0x760 fffffe80416afc70 [<...>] [<ffffffff82949b71>] ? shrink_dentry_list+0x51/0x760 fffffe80416afc78 [<...>] [<ffffffff82949da8>] shrink_dentry_list+0x288/0x760 fffffe80416afc80 [<...>] [<ffffffff8294ae75>] shrink_dcache_sb+0x155/0x420 fffffe80416afcc8 [<...>] [<ffffffff8953a7c3>] ? debug_smp_processor_id+0x23/0xa0 fffffe80416afce0 [<...>] [<ffffffff8294ad20>] ? do_one_tre ---truncated--- |
| CVE-2024-44958 | In the Linux kernel, the following vulnerability has been resolved: sched/smt: Fix unbalance sched_smt_present dec/inc I got the following warn report while doing stress test: jump label: negative count! WARNING: CPU: 3 PID: 38 at kernel/jump_label.c:263 static_key_slow_try_dec+0x9d/0xb0 Call Trace: <TASK> __static_key_slow_dec_cpuslocked+0x16/0x70 sched_cpu_deactivate+0x26e/0x2a0 cpuhp_invoke_callback+0x3ad/0x10d0 cpuhp_thread_fun+0x3f5/0x680 smpboot_thread_fn+0x56d/0x8d0 kthread+0x309/0x400 ret_from_fork+0x41/0x70 ret_from_fork_asm+0x1b/0x30 </TASK> Because when cpuset_cpu_inactive() fails in sched_cpu_deactivate(), the cpu offline failed, but sched_smt_present is decremented before calling sched_cpu_deactivate(), it leads to unbalanced dec/inc, so fix it by incrementing sched_smt_present in the error path. |
| CVE-2024-44957 | In the Linux kernel, the following vulnerability has been resolved: xen: privcmd: Switch from mutex to spinlock for irqfds irqfd_wakeup() gets EPOLLHUP, when it is called by eventfd_release() by way of wake_up_poll(&ctx->wqh, EPOLLHUP), which gets called under spin_lock_irqsave(). We can't use a mutex here as it will lead to a deadlock. Fix it by switching over to a spin lock. |
| CVE-2024-44956 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/preempt_fence: enlarge the fence critical section It is really easy to introduce subtle deadlocks in preempt_fence_work_func() since we operate on single global ordered-wq for signalling our preempt fences behind the scenes, so even though we signal a particular fence, everything in the callback should be in the fence critical section, since blocking in the callback will prevent other published fences from signalling. If we enlarge the fence critical section to cover the entire callback, then lockdep should be able to understand this better, and complain if we grab a sensitive lock like vm->lock, which is also held when waiting on preempt fences. |
| CVE-2024-44955 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute [Why] When unplug one of monitors connected after mst hub, encounter null pointer dereference. It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When commit new state which directly referring to info stored in dc_sink will cause null pointer dereference. [how] Remove redundant checking condition. Relevant condition should already be covered by checking if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected. |
| CVE-2024-44954 | In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: Fix racy access to midibuf There can be concurrent accesses to line6 midibuf from both the URB completion callback and the rawmidi API access. This could be a cause of KMSAN warning triggered by syzkaller below (so put as reported-by here). This patch protects the midibuf call of the former code path with a spinlock for avoiding the possible races. |
| CVE-2024-44953 | In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix deadlock during RTC update There is a deadlock when runtime suspend waits for the flush of RTC work, and the RTC work calls ufshcd_rpm_get_sync() to wait for runtime resume. Here is deadlock backtrace: kworker/0:1 D 4892.876354 10 10971 4859 0x4208060 0x8 10 0 120 670730152367 ptr f0ffff80c2e40000 0 1 0x00000001 0x000000ff 0x000000ff 0x000000ff <ffffffee5e71ddb0> __switch_to+0x1a8/0x2d4 <ffffffee5e71e604> __schedule+0x684/0xa98 <ffffffee5e71ea60> schedule+0x48/0xc8 <ffffffee5e725f78> schedule_timeout+0x48/0x170 <ffffffee5e71fb74> do_wait_for_common+0x108/0x1b0 <ffffffee5e71efe0> wait_for_completion+0x44/0x60 <ffffffee5d6de968> __flush_work+0x39c/0x424 <ffffffee5d6decc0> __cancel_work_sync+0xd8/0x208 <ffffffee5d6dee2c> cancel_delayed_work_sync+0x14/0x28 <ffffffee5e2551b8> __ufshcd_wl_suspend+0x19c/0x480 <ffffffee5e255fb8> ufshcd_wl_runtime_suspend+0x3c/0x1d4 <ffffffee5dffd80c> scsi_runtime_suspend+0x78/0xc8 <ffffffee5df93580> __rpm_callback+0x94/0x3e0 <ffffffee5df90b0c> rpm_suspend+0x2d4/0x65c <ffffffee5df91448> __pm_runtime_suspend+0x80/0x114 <ffffffee5dffd95c> scsi_runtime_idle+0x38/0x6c <ffffffee5df912f4> rpm_idle+0x264/0x338 <ffffffee5df90f14> __pm_runtime_idle+0x80/0x110 <ffffffee5e24ce44> ufshcd_rtc_work+0x128/0x1e4 <ffffffee5d6e3a40> process_one_work+0x26c/0x650 <ffffffee5d6e65c8> worker_thread+0x260/0x3d8 <ffffffee5d6edec8> kthread+0x110/0x134 <ffffffee5d616b18> ret_from_fork+0x10/0x20 Skip updating RTC if RPM state is not RPM_ACTIVE. |
| CVE-2024-44951 | In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: fix TX fifo corruption Sometimes, when a packet is received on channel A at almost the same time as a packet is about to be transmitted on channel B, we observe with a logic analyzer that the received packet on channel A is transmitted on channel B. In other words, the Tx buffer data on channel B is corrupted with data from channel A. The problem appeared since commit 4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels"), which changed the EFR locking to operate on each channel instead of chip-wise. This commit has introduced a regression, because the EFR lock is used not only to protect the EFR registers access, but also, in a very obscure and undocumented way, to protect access to the data buffer, which is shared by the Tx and Rx handlers, but also by each channel of the IC. Fix this regression first by switching to kfifo_out_linear_ptr() in sc16is7xx_handle_tx() to eliminate the need for a shared Rx/Tx buffer. Secondly, replace the chip-wise Rx buffer with a separate Rx buffer for each channel. |
| CVE-2024-44950 | In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: fix invalid FIFO access with special register set When enabling access to the special register set, Receiver time-out and RHR interrupts can happen. In this case, the IRQ handler will try to read from the FIFO thru the RHR register at address 0x00, but address 0x00 is mapped to DLL register, resulting in erroneous FIFO reading. Call graph example: sc16is7xx_startup(): entry sc16is7xx_ms_proc(): entry sc16is7xx_set_termios(): entry sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set sc16is7xx_port_irq() entry --> IIR is 0x0C sc16is7xx_handle_rx() entry sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is mapped to DLL (LCR=LCR_CONF_MODE_A) sc16is7xx_set_baud(): exit --> Restore access to general register set Fix the problem by claiming the efr_lock mutex when accessing the Special register set. |
| CVE-2024-44949 | In the Linux kernel, the following vulnerability has been resolved: parisc: fix a possible DMA corruption ARCH_DMA_MINALIGN was defined as 16 - this is too small - it may be possible that two unrelated 16-byte allocations share a cache line. If one of these allocations is written using DMA and the other is written using cached write, the value that was written with DMA may be corrupted. This commit changes ARCH_DMA_MINALIGN to be 128 on PA20 and 32 on PA1.1 - that's the largest possible cache line size. As different parisc microarchitectures have different cache line size, we define arch_slab_minalign(), cache_line_size() and dma_get_cache_alignment() so that the kernel may tune slab cache parameters dynamically, based on the detected cache line size. |
| CVE-2024-44948 | In the Linux kernel, the following vulnerability has been resolved: x86/mtrr: Check if fixed MTRRs exist before saving them MTRRs have an obsolete fixed variant for fine grained caching control of the 640K-1MB region that uses separate MSRs. This fixed variant has a separate capability bit in the MTRR capability MSR. So far all x86 CPUs which support MTRR have this separate bit set, so it went unnoticed that mtrr_save_state() does not check the capability bit before accessing the fixed MTRR MSRs. Though on a CPU that does not support the fixed MTRR capability this results in a #GP. The #GP itself is harmless because the RDMSR fault is handled gracefully, but results in a WARN_ON(). Add the missing capability check to prevent this. |
| CVE-2024-44947 | In the Linux kernel, the following vulnerability has been resolved: fuse: Initialize beyond-EOF page contents before setting uptodate fuse_notify_store(), unlike fuse_do_readpage(), does not enable page zeroing (because it can be used to change partial page contents). So fuse_notify_store() must be more careful to fully initialize page contents (including parts of the page that are beyond end-of-file) before marking the page uptodate. The current code can leave beyond-EOF page contents uninitialized, which makes these uninitialized page contents visible to userspace via mmap(). This is an information leak, but only affects systems which do not enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the corresponding kernel command line parameter). |
| CVE-2024-44946 | In the Linux kernel, the following vulnerability has been resolved: kcm: Serialise kcm_sendmsg() for the same socket. syzkaller reported UAF in kcm_release(). [0] The scenario is 1. Thread A builds a skb with MSG_MORE and sets kcm->seq_skb. 2. Thread A resumes building skb from kcm->seq_skb but is blocked by sk_stream_wait_memory() 3. Thread B calls sendmsg() concurrently, finishes building kcm->seq_skb and puts the skb to the write queue 4. Thread A faces an error and finally frees skb that is already in the write queue 5. kcm_release() does double-free the skb in the write queue When a thread is building a MSG_MORE skb, another thread must not touch it. Let's add a per-sk mutex and serialise kcm_sendmsg(). [0]: BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline] BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline] BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167 CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G B 6.8.0-rc5-syzkaller-g9abbc24128bc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 __skb_unlink include/linux/skbuff.h:2366 [inline] __skb_dequeue include/linux/skbuff.h:2385 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] __skb_queue_purge include/linux/skbuff.h:3181 [inline] kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Allocated by task 6166: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903 __alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1296 [inline] kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x220/0x2c0 net/socket.c:768 splice_to_socket+0x7cc/0xd58 fs/splice.c:889 do_splice_from fs/splice.c:941 [inline] direct_splice_actor+0xec/0x1d8 fs/splice.c:1164 splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108 do_splice_direct_actor ---truncated--- |
| CVE-2024-44945 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink: Initialise extack before use in ACKs Add missing extack initialisation when ACKing BATCH_BEGIN and BATCH_END. |
| CVE-2024-44944 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use helper function to calculate expect ID Delete expectation path is missing a call to the nf_expect_get_id() helper function to calculate the expectation ID, otherwise LSB of the expectation object address is leaked to userspace. |
| CVE-2024-44943 | In the Linux kernel, the following vulnerability has been resolved: mm: gup: stop abusing try_grab_folio A kernel warning was reported when pinning folio in CMA memory when launching SEV virtual machine. The splat looks like: [ 464.325306] WARNING: CPU: 13 PID: 6734 at mm/gup.c:1313 __get_user_pages+0x423/0x520 [ 464.325464] CPU: 13 PID: 6734 Comm: qemu-kvm Kdump: loaded Not tainted 6.6.33+ #6 [ 464.325477] RIP: 0010:__get_user_pages+0x423/0x520 [ 464.325515] Call Trace: [ 464.325520] <TASK> [ 464.325523] ? __get_user_pages+0x423/0x520 [ 464.325528] ? __warn+0x81/0x130 [ 464.325536] ? __get_user_pages+0x423/0x520 [ 464.325541] ? report_bug+0x171/0x1a0 [ 464.325549] ? handle_bug+0x3c/0x70 [ 464.325554] ? exc_invalid_op+0x17/0x70 [ 464.325558] ? asm_exc_invalid_op+0x1a/0x20 [ 464.325567] ? __get_user_pages+0x423/0x520 [ 464.325575] __gup_longterm_locked+0x212/0x7a0 [ 464.325583] internal_get_user_pages_fast+0xfb/0x190 [ 464.325590] pin_user_pages_fast+0x47/0x60 [ 464.325598] sev_pin_memory+0xca/0x170 [kvm_amd] [ 464.325616] sev_mem_enc_register_region+0x81/0x130 [kvm_amd] Per the analysis done by yangge, when starting the SEV virtual machine, it will call pin_user_pages_fast(..., FOLL_LONGTERM, ...) to pin the memory. But the page is in CMA area, so fast GUP will fail then fallback to the slow path due to the longterm pinnalbe check in try_grab_folio(). The slow path will try to pin the pages then migrate them out of CMA area. But the slow path also uses try_grab_folio() to pin the page, it will also fail due to the same check then the above warning is triggered. In addition, the try_grab_folio() is supposed to be used in fast path and it elevates folio refcount by using add ref unless zero. We are guaranteed to have at least one stable reference in slow path, so the simple atomic add could be used. The performance difference should be trivial, but the misuse may be confusing and misleading. Redefined try_grab_folio() to try_grab_folio_fast(), and try_grab_page() to try_grab_folio(), and use them in the proper paths. This solves both the abuse and the kernel warning. The proper naming makes their usecase more clear and should prevent from abusing in the future. peterx said: : The user will see the pin fails, for gpu-slow it further triggers the WARN : right below that failure (as in the original report): : : folio = try_grab_folio(page, page_increm - 1, : foll_flags); : if (WARN_ON_ONCE(!folio)) { <------------------------ here : /* : * Release the 1st page ref if the : * folio is problematic, fail hard. : */ : gup_put_folio(page_folio(page), 1, : foll_flags); : ret = -EFAULT; : goto out; : } [1] https://lore.kernel.org/linux-mm/[email protected]/ [[email protected]: fix implicit declaration of function try_grab_folio_fast] Link: https://lkml.kernel.org/r/CAHbLzkowMSso-4Nufc9hcMehQsK9PNz3OSu-+eniU-2Mm-xjhA@mail.gmail.com |
| CVE-2024-44942 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on F2FS_INLINE_DATA flag in inode during GC syzbot reports a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/inline.c:258! CPU: 1 PID: 34 Comm: kworker/u8:2 Not tainted 6.9.0-rc6-syzkaller-00012-g9e4bc4bcae01 #0 RIP: 0010:f2fs_write_inline_data+0x781/0x790 fs/f2fs/inline.c:258 Call Trace: f2fs_write_single_data_page+0xb65/0x1d60 fs/f2fs/data.c:2834 f2fs_write_cache_pages fs/f2fs/data.c:3133 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3288 [inline] f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3315 do_writepages+0x35b/0x870 mm/page-writeback.c:2612 __writeback_single_inode+0x165/0x10b0 fs/fs-writeback.c:1650 writeback_sb_inodes+0x905/0x1260 fs/fs-writeback.c:1941 wb_writeback+0x457/0xce0 fs/fs-writeback.c:2117 wb_do_writeback fs/fs-writeback.c:2264 [inline] wb_workfn+0x410/0x1090 fs/fs-writeback.c:2304 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa12/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f2/0x390 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 The root cause is: inline_data inode can be fuzzed, so that there may be valid blkaddr in its direct node, once f2fs triggers background GC to migrate the block, it will hit f2fs_bug_on() during dirty page writeback. Let's add sanity check on F2FS_INLINE_DATA flag in inode during GC, so that, it can forbid migrating inline_data inode's data block for fixing. |
| CVE-2024-44941 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to cover read extent cache access with lock syzbot reports a f2fs bug as below: BUG: KASAN: slab-use-after-free in sanity_check_extent_cache+0x370/0x410 fs/f2fs/extent_cache.c:46 Read of size 4 at addr ffff8880739ab220 by task syz-executor200/5097 CPU: 0 PID: 5097 Comm: syz-executor200 Not tainted 6.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 sanity_check_extent_cache+0x370/0x410 fs/f2fs/extent_cache.c:46 do_read_inode fs/f2fs/inode.c:509 [inline] f2fs_iget+0x33e1/0x46e0 fs/f2fs/inode.c:560 f2fs_nfs_get_inode+0x74/0x100 fs/f2fs/super.c:3237 generic_fh_to_dentry+0x9f/0xf0 fs/libfs.c:1413 exportfs_decode_fh_raw+0x152/0x5f0 fs/exportfs/expfs.c:444 exportfs_decode_fh+0x3c/0x80 fs/exportfs/expfs.c:584 do_handle_to_path fs/fhandle.c:155 [inline] handle_to_path fs/fhandle.c:210 [inline] do_handle_open+0x495/0x650 fs/fhandle.c:226 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f We missed to cover sanity_check_extent_cache() w/ extent cache lock, so, below race case may happen, result in use after free issue. - f2fs_iget - do_read_inode - f2fs_init_read_extent_tree : add largest extent entry in to cache - shrink - f2fs_shrink_read_extent_tree - __shrink_extent_tree - __detach_extent_node : drop largest extent entry - sanity_check_extent_cache : access et->largest w/o lock let's refactor sanity_check_extent_cache() to avoid extent cache access and call it before f2fs_init_read_extent_tree() to fix this issue. |
| CVE-2024-44940 | In the Linux kernel, the following vulnerability has been resolved: fou: remove warn in gue_gro_receive on unsupported protocol Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is not known or does not have a GRO handler. Such a packet is easily constructed. Syzbot generates them and sets off this warning. Remove the warning as it is expected and not actionable. The warning was previously reduced from WARN_ON to WARN_ON_ONCE in commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad proto callbacks"). |
| CVE-2024-44939 | In the Linux kernel, the following vulnerability has been resolved: jfs: fix null ptr deref in dtInsertEntry [syzbot reported] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 5061 Comm: syz-executor404 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:dtInsertEntry+0xd0c/0x1780 fs/jfs/jfs_dtree.c:3713 ... [Analyze] In dtInsertEntry(), when the pointer h has the same value as p, after writing name in UniStrncpy_to_le(), p->header.flag will be cleared. This will cause the previously true judgment "p->header.flag & BT-LEAF" to change to no after writing the name operation, this leads to entering an incorrect branch and accessing the uninitialized object ih when judging this condition for the second time. [Fix] After got the page, check freelist first, if freelist == 0 then exit dtInsert() and return -EINVAL. |
| CVE-2024-44938 | In the Linux kernel, the following vulnerability has been resolved: jfs: Fix shift-out-of-bounds in dbDiscardAG When searching for the next smaller log2 block, BLKSTOL2() returned 0, causing shift exponent -1 to be negative. This patch fixes the issue by exiting the loop directly when negative shift is found. |
| CVE-2024-44937 | In the Linux kernel, the following vulnerability has been resolved: platform/x86: intel-vbtn: Protect ACPI notify handler against recursion Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs") ACPI notify handlers like the intel-vbtn notify_handler() may run on multiple CPU cores racing with themselves. This race gets hit on Dell Venue 7140 tablets when undocking from the keyboard, causing the handler to try and register priv->switches_dev twice, as can be seen from the dev_info() message getting logged twice: [ 83.861800] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event [ 83.861858] input: Intel Virtual Switches as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17 [ 83.861865] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event After which things go seriously wrong: [ 83.861872] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17' ... [ 83.861967] kobject: kobject_add_internal failed for input17 with -EEXIST, don't try to register things with the same name in the same directory. [ 83.877338] BUG: kernel NULL pointer dereference, address: 0000000000000018 ... Protect intel-vbtn notify_handler() from racing with itself with a mutex to fix this. |
| CVE-2024-44936 | In the Linux kernel, the following vulnerability has been resolved: power: supply: rt5033: Bring back i2c_set_clientdata Commit 3a93da231c12 ("power: supply: rt5033: Use devm_power_supply_register() helper") reworked the driver to use devm. While at it, the i2c_set_clientdata was dropped along with the remove callback. Unfortunately other parts of the driver also rely on i2c clientdata so this causes kernel oops. Bring the call back to fix the driver. |
| CVE-2024-44935 | In the Linux kernel, the following vulnerability has been resolved: sctp: Fix null-ptr-deref in reuseport_add_sock(). syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in reuseport_add_sock(). [0] The repro first creates a listener with SO_REUSEPORT. Then, it creates another listener on the same port and concurrently closes the first listener. The second listen() calls reuseport_add_sock() with the first listener as sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently, but the close() does clear it by reuseport_detach_sock(). The problem is SCTP does not properly synchronise reuseport_alloc(), reuseport_add_sock(), and reuseport_detach_sock(). The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must provide synchronisation for sockets that are classified into the same reuseport group. Otherwise, such sockets form multiple identical reuseport groups, and all groups except one would be silently dead. 1. Two sockets call listen() concurrently 2. No socket in the same group found in sctp_ep_hashtable[] 3. Two sockets call reuseport_alloc() and form two reuseport groups 4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives incoming packets Also, the reported null-ptr-deref could occur. TCP/UDP guarantees that would not happen by holding the hash bucket lock. Let's apply the locking strategy to __sctp_hash_endpoint() and __sctp_unhash_endpoint(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350 Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14 RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012 RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385 R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0 R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __sctp_hash_endpoint net/sctp/input.c:762 [inline] sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790 sctp_listen_start net/sctp/socket.c:8570 [inline] sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625 __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] __se_sys_listen net/socket.c:1900 [inline] __x64_sys_listen+0x5a/0x70 net/socket.c:1900 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f24e46039b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032 RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9 RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004 RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0 R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c R13: ---truncated--- |
| CVE-2024-44934 | In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: wait for previous gc cycles when removing port syzbot hit a use-after-free[1] which is caused because the bridge doesn't make sure that all previous garbage has been collected when removing a port. What happens is: CPU 1 CPU 2 start gc cycle remove port acquire gc lock first wait for lock call br_multicasg_gc() directly acquire lock now but free port the port can be freed while grp timers still running Make sure all previous gc cycles have finished by using flush_work before freeing the port. [1] BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699 CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers+0x74b/0xaf0 kernel/time/timer.c:2417 __run_timer_base kernel/time/timer.c:2428 [inline] __run_timer_base kernel/time/timer.c:2421 [inline] run_timer_base+0x111/0x190 kernel/time/timer.c:2437 |
| CVE-2024-44933 | In the Linux kernel, the following vulnerability has been resolved: bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() A recent commit has modified the code in __bnxt_reserve_rings() to set the default RSS indirection table to default only when the number of RX rings is changing. While this works for newer firmware that requires RX ring reservations, it causes the regression on older firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns false). With older firmware, RX ring reservations are not required and so hw_resc->resv_rx_rings is not always set to the proper value. The comparison: if (old_rx_rings != bp->hw_resc.resv_rx_rings) in __bnxt_reserve_rings() may be false even when the RX rings are changing. This will cause __bnxt_reserve_rings() to skip setting the default RSS indirection table to default to match the current number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to use an out-of-range index. We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this scenario. We just need to move it up in bnxt_need_reserve_rings() to be called unconditionally when using older firmware. Without the fix, if the TX rings are changing, we'll skip the bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained in the last paragraph. Without setting the default RSS indirection table to default, it causes the regression: BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 Read of size 2 at addr ffff8881c5809618 by task ethtool/31525 Call Trace: __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460 __bnxt_setup_vnic_p5+0x12e/0x270 __bnxt_open_nic+0x2262/0x2f30 bnxt_open_nic+0x5d/0xf0 ethnl_set_channels+0x5d4/0xb30 ethnl_default_set_doit+0x2f1/0x620 |
| CVE-2024-44932 | In the Linux kernel, the following vulnerability has been resolved: idpf: fix UAFs when destroying the queues The second tagged commit started sometimes (very rarely, but possible) throwing WARNs from net/core/page_pool.c:page_pool_disable_direct_recycling(). Turned out idpf frees interrupt vectors with embedded NAPIs *before* freeing the queues making page_pools' NAPI pointers lead to freed memory before these pools are destroyed by libeth. It's not clear whether there are other accesses to the freed vectors when destroying the queues, but anyway, we usually free queue/interrupt vectors only when the queues are destroyed and the NAPIs are guaranteed to not be referenced anywhere. Invert the allocation and freeing logic making queue/interrupt vectors be allocated first and freed last. Vectors don't require queues to be present, so this is safe. Additionally, this change allows to remove that useless queue->q_vector pointer cleanup, as vectors are still valid when freeing the queues (+ both are freed within one function, so it's not clear why nullify the pointers at all). |
| CVE-2024-44931 | In the Linux kernel, the following vulnerability has been resolved: gpio: prevent potential speculation leaks in gpio_device_get_desc() Userspace may trigger a speculative read of an address outside the gpio descriptor array. Users can do that by calling gpio_ioctl() with an offset out of range. Offset is copied from user and then used as an array index to get the gpio descriptor without sanitization in gpio_device_get_desc(). This change ensures that the offset is sanitized by using array_index_nospec() to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. |
| CVE-2024-43914 | In the Linux kernel, the following vulnerability has been resolved: md/raid5: avoid BUG_ON() while continue reshape after reassembling Currently, mdadm support --revert-reshape to abort the reshape while reassembling, as the test 07revert-grow. However, following BUG_ON() can be triggerred by the test: kernel BUG at drivers/md/raid5.c:6278! invalid opcode: 0000 [#1] PREEMPT SMP PTI irq event stamp: 158985 CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94 RIP: 0010:reshape_request+0x3f1/0xe60 Call Trace: <TASK> raid5_sync_request+0x43d/0x550 md_do_sync+0xb7a/0x2110 md_thread+0x294/0x2b0 kthread+0x147/0x1c0 ret_from_fork+0x59/0x70 ret_from_fork_asm+0x1a/0x30 </TASK> Root cause is that --revert-reshape update the raid_disks from 5 to 4, while reshape position is still set, and after reassembling the array, reshape position will be read from super block, then during reshape the checking of 'writepos' that is caculated by old reshape position will fail. Fix this panic the easy way first, by converting the BUG_ON() to WARN_ON(), and stop the reshape if checkings fail. Noted that mdadm must fix --revert-shape as well, and probably md/raid should enhance metadata validation as well, however this means reassemble will fail and there must be user tools to fix the wrong metadata. |
| CVE-2024-43913 | In the Linux kernel, the following vulnerability has been resolved: nvme: apple: fix device reference counting Drivers must call nvme_uninit_ctrl after a successful nvme_init_ctrl. Split the allocation side out to make the error handling boundary easier to navigate. The apple driver had been doing this wrong, leaking the controller device memory on a tagset failure. |
| CVE-2024-43912 | In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: disallow setting special AP channel widths Setting the AP channel width is meant for use with the normal 20/40/... MHz channel width progression, and switching around in S1G or narrow channels isn't supported. Disallow that. |
| CVE-2024-43911 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix NULL dereference at band check in starting tx ba session In MLD connection, link_data/link_conf are dynamically allocated. They don't point to vif->bss_conf. So, there will be no chanreq assigned to vif->bss_conf and then the chan will be NULL. Tweak the code to check ht_supported/vht_supported/has_he/has_eht on sta deflink. Crash log (with rtw89 version under MLO development): [ 9890.526087] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 9890.526102] #PF: supervisor read access in kernel mode [ 9890.526105] #PF: error_code(0x0000) - not-present page [ 9890.526109] PGD 0 P4D 0 [ 9890.526114] Oops: 0000 [#1] PREEMPT SMP PTI [ 9890.526119] CPU: 2 PID: 6367 Comm: kworker/u16:2 Kdump: loaded Tainted: G OE 6.9.0 #1 [ 9890.526123] Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB3WW (2.73 ) 11/28/2018 [ 9890.526126] Workqueue: phy2 rtw89_core_ba_work [rtw89_core] [ 9890.526203] RIP: 0010:ieee80211_start_tx_ba_session (net/mac80211/agg-tx.c:618 (discriminator 1)) mac80211 [ 9890.526279] Code: f7 e8 d5 93 3e ea 48 83 c4 28 89 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 49 8b 84 24 e0 f1 ff ff 48 8b 80 90 1b 00 00 <83> 38 03 0f 84 37 fe ff ff bb ea ff ff ff eb cc 49 8b 84 24 10 f3 All code ======== 0: f7 e8 imul %eax 2: d5 (bad) 3: 93 xchg %eax,%ebx 4: 3e ea ds (bad) 6: 48 83 c4 28 add $0x28,%rsp a: 89 d8 mov %ebx,%eax c: 5b pop %rbx d: 41 5c pop %r12 f: 41 5d pop %r13 11: 41 5e pop %r14 13: 41 5f pop %r15 15: 5d pop %rbp 16: c3 retq 17: cc int3 18: cc int3 19: cc int3 1a: cc int3 1b: 49 8b 84 24 e0 f1 ff mov -0xe20(%r12),%rax 22: ff 23: 48 8b 80 90 1b 00 00 mov 0x1b90(%rax),%rax 2a:* 83 38 03 cmpl $0x3,(%rax) <-- trapping instruction 2d: 0f 84 37 fe ff ff je 0xfffffffffffffe6a 33: bb ea ff ff ff mov $0xffffffea,%ebx 38: eb cc jmp 0x6 3a: 49 rex.WB 3b: 8b .byte 0x8b 3c: 84 24 10 test %ah,(%rax,%rdx,1) 3f: f3 repz Code starting with the faulting instruction =========================================== 0: 83 38 03 cmpl $0x3,(%rax) 3: 0f 84 37 fe ff ff je 0xfffffffffffffe40 9: bb ea ff ff ff mov $0xffffffea,%ebx e: eb cc jmp 0xffffffffffffffdc 10: 49 rex.WB 11: 8b .byte 0x8b 12: 84 24 10 test %ah,(%rax,%rdx,1) 15: f3 repz [ 9890.526285] RSP: 0018:ffffb8db09013d68 EFLAGS: 00010246 [ 9890.526291] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9308e0d656c8 [ 9890.526295] RDX: 0000000000000000 RSI: ffffffffab99460b RDI: ffffffffab9a7685 [ 9890.526300] RBP: ffffb8db09013db8 R08: 0000000000000000 R09: 0000000000000873 [ 9890.526304] R10: ffff9308e0d64800 R11: 0000000000000002 R12: ffff9308e5ff6e70 [ 9890.526308] R13: ffff930952500e20 R14: ffff9309192a8c00 R15: 0000000000000000 [ 9890.526313] FS: 0000000000000000(0000) GS:ffff930b4e700000(0000) knlGS:0000000000000000 [ 9890.526316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9890.526318] CR2: 0000000000000000 CR3: 0000000391c58005 CR4: 00000000001706f0 [ 9890.526321] Call Trace: [ 9890.526324] <TASK> [ 9890.526327] ? show_regs (arch/x86/kernel/dumpstack.c:479) [ 9890.526335] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 9890.526340] ? page_fault_oops (arch/x86/mm/fault.c:713) [ 9890.526347] ? search_module_extables (kernel/module/main.c:3256 (discriminator ---truncated--- |
| CVE-2024-43910 | In the Linux kernel, the following vulnerability has been resolved: bpf: add missing check_func_arg_reg_off() to prevent out-of-bounds memory accesses Currently, it's possible to pass in a modified CONST_PTR_TO_DYNPTR to a global function as an argument. The adverse effects of this is that BPF helpers can continue to make use of this modified CONST_PTR_TO_DYNPTR from within the context of the global function, which can unintentionally result in out-of-bounds memory accesses and therefore compromise overall system stability i.e. [ 244.157771] BUG: KASAN: slab-out-of-bounds in bpf_dynptr_data+0x137/0x140 [ 244.161345] Read of size 8 at addr ffff88810914be68 by task test_progs/302 [ 244.167151] CPU: 0 PID: 302 Comm: test_progs Tainted: G O E 6.10.0-rc3-00131-g66b586715063 #533 [ 244.174318] Call Trace: [ 244.175787] <TASK> [ 244.177356] dump_stack_lvl+0x66/0xa0 [ 244.179531] print_report+0xce/0x670 [ 244.182314] ? __virt_addr_valid+0x200/0x3e0 [ 244.184908] kasan_report+0xd7/0x110 [ 244.187408] ? bpf_dynptr_data+0x137/0x140 [ 244.189714] ? bpf_dynptr_data+0x137/0x140 [ 244.192020] bpf_dynptr_data+0x137/0x140 [ 244.194264] bpf_prog_b02a02fdd2bdc5fa_global_call_bpf_dynptr_data+0x22/0x26 [ 244.198044] bpf_prog_b0fe7b9d7dc3abde_callback_adjust_bpf_dynptr_reg_off+0x1f/0x23 [ 244.202136] bpf_user_ringbuf_drain+0x2c7/0x570 [ 244.204744] ? 0xffffffffc0009e58 [ 244.206593] ? __pfx_bpf_user_ringbuf_drain+0x10/0x10 [ 244.209795] bpf_prog_33ab33f6a804ba2d_user_ringbuf_callback_const_ptr_to_dynptr_reg_off+0x47/0x4b [ 244.215922] bpf_trampoline_6442502480+0x43/0xe3 [ 244.218691] __x64_sys_prlimit64+0x9/0xf0 [ 244.220912] do_syscall_64+0xc1/0x1d0 [ 244.223043] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 244.226458] RIP: 0033:0x7ffa3eb8f059 [ 244.228582] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8f 1d 0d 00 f7 d8 64 89 01 48 [ 244.241307] RSP: 002b:00007ffa3e9c6eb8 EFLAGS: 00000206 ORIG_RAX: 000000000000012e [ 244.246474] RAX: ffffffffffffffda RBX: 00007ffa3e9c7cdc RCX: 00007ffa3eb8f059 [ 244.250478] RDX: 00007ffa3eb162b4 RSI: 0000000000000000 RDI: 00007ffa3e9c7fb0 [ 244.255396] RBP: 00007ffa3e9c6ed0 R08: 00007ffa3e9c76c0 R09: 0000000000000000 [ 244.260195] R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffff80 [ 244.264201] R13: 000000000000001c R14: 00007ffc5d6b4260 R15: 00007ffa3e1c7000 [ 244.268303] </TASK> Add a check_func_arg_reg_off() to the path in which the BPF verifier verifies the arguments of global function arguments, specifically those which take an argument of type ARG_PTR_TO_DYNPTR | MEM_RDONLY. Also, process_dynptr_func() doesn't appear to perform any explicit and strict type matching on the supplied register type, so let's also enforce that a register either type PTR_TO_STACK or CONST_PTR_TO_DYNPTR is by the caller. |
| CVE-2024-43909 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference for smu7 optimize the code to avoid pass a null pointer (hwmgr->backend) to function smu7_update_edc_leakage_table. |
| CVE-2024-43908 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix the null pointer dereference to ras_manager Check ras_manager before using it |
| CVE-2024-43907 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference in apply_state_adjust_rules Check the pointer value to fix potential null pointer dereference |
| CVE-2024-43906 | In the Linux kernel, the following vulnerability has been resolved: drm/admgpu: fix dereferencing null pointer context When user space sets an invalid ta type, the pointer context will be empty. So it need to check the pointer context before using it |
| CVE-2024-43905 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr Check return value and conduct null pointer handling to avoid null pointer dereference. |
| CVE-2024-43904 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checks for 'stream' and 'plane' before dereferencing This commit adds null checks for the 'stream' and 'plane' variables in the dcn30_apply_idle_power_optimizations function. These variables were previously assumed to be null at line 922, but they were used later in the code without checking if they were null. This could potentially lead to a null pointer dereference, which would cause a crash. The null checks ensure that 'stream' and 'plane' are not null before they are used, preventing potential crashes. Fixes the below static smatch checker: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:938 dcn30_apply_idle_power_optimizations() error: we previously assumed 'stream' could be null (see line 922) drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:940 dcn30_apply_idle_power_optimizations() error: we previously assumed 'plane' could be null (see line 922) |
| CVE-2024-43903 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for 'afb' before dereferencing in amdgpu_dm_plane_handle_cursor_update This commit adds a null check for the 'afb' variable in the amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was assumed to be null, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252) |
| CVE-2024-43902 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checker before passing variables Checks null pointer before passing variables to functions. This fixes 3 NULL_RETURNS issues reported by Coverity. |
| CVE-2024-43901 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference for DTN log in DCN401 When users run the command: cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log The following NULL pointer dereference happens: [ +0.000003] BUG: kernel NULL pointer dereference, address: NULL [ +0.000005] #PF: supervisor instruction fetch in kernel mode [ +0.000002] #PF: error_code(0x0010) - not-present page [ +0.000002] PGD 0 P4D 0 [ +0.000004] Oops: 0010 [#1] PREEMPT SMP NOPTI [ +0.000003] RIP: 0010:0x0 [ +0.000008] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [...] [ +0.000002] PKRU: 55555554 [ +0.000002] Call Trace: [ +0.000002] <TASK> [ +0.000003] ? show_regs+0x65/0x70 [ +0.000006] ? __die+0x24/0x70 [ +0.000004] ? page_fault_oops+0x160/0x470 [ +0.000006] ? do_user_addr_fault+0x2b5/0x690 [ +0.000003] ? prb_read_valid+0x1c/0x30 [ +0.000005] ? exc_page_fault+0x8c/0x1a0 [ +0.000005] ? asm_exc_page_fault+0x27/0x30 [ +0.000012] dcn10_log_color_state+0xf9/0x510 [amdgpu] [ +0.000306] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? vsnprintf+0x2fb/0x600 [ +0.000009] dcn10_log_hw_state+0xfd0/0xfe0 [amdgpu] [ +0.000218] ? __mod_memcg_lruvec_state+0xe8/0x170 [ +0.000008] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? debug_smp_processor_id+0x17/0x20 [ +0.000003] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? set_ptes.isra.0+0x2b/0x90 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? _raw_spin_unlock+0x19/0x40 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? do_anonymous_page+0x337/0x700 [ +0.000004] dtn_log_read+0x82/0x120 [amdgpu] [ +0.000207] full_proxy_read+0x66/0x90 [ +0.000007] vfs_read+0xb0/0x340 [ +0.000005] ? __count_memcg_events+0x79/0xe0 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? count_memcg_events.constprop.0+0x1e/0x40 [ +0.000003] ? handle_mm_fault+0xb2/0x370 [ +0.000003] ksys_read+0x6b/0xf0 [ +0.000004] __x64_sys_read+0x19/0x20 [ +0.000003] do_syscall_64+0x60/0x130 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ +0.000003] RIP: 0033:0x7fdf32f147e2 [...] This error happens when the color log tries to read the gamut remap information from DCN401 which is not initialized in the dcn401_dpp_funcs which leads to a null pointer dereference. This commit addresses this issue by adding a proper guard to access the gamut_remap callback in case the specific ASIC did not implement this function. |
| CVE-2024-43900 | In the Linux kernel, the following vulnerability has been resolved: media: xc2028: avoid use-after-free in load_firmware_cb() syzkaller reported use-after-free in load_firmware_cb() [1]. The reason is because the module allocated a struct tuner in tuner_probe(), and then the module initialization failed, the struct tuner was released. A worker which created during module initialization accesses this struct tuner later, it caused use-after-free. The process is as follows: task-6504 worker_thread tuner_probe <= alloc dvb_frontend [2] ... request_firmware_nowait <= create a worker ... tuner_remove <= free dvb_frontend ... request_firmware_work_func <= the firmware is ready load_firmware_cb <= but now the dvb_frontend has been freed To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is null, report a warning and just return. [1]: ================================================================== BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0 Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504 Call trace: load_firmware_cb+0x1310/0x17a0 request_firmware_work_func+0x128/0x220 process_one_work+0x770/0x1824 worker_thread+0x488/0xea0 kthread+0x300/0x430 ret_from_fork+0x10/0x20 Allocated by task 6504: kzalloc tuner_probe+0xb0/0x1430 i2c_device_probe+0x92c/0xaf0 really_probe+0x678/0xcd0 driver_probe_device+0x280/0x370 __device_attach_driver+0x220/0x330 bus_for_each_drv+0x134/0x1c0 __device_attach+0x1f4/0x410 device_initial_probe+0x20/0x30 bus_probe_device+0x184/0x200 device_add+0x924/0x12c0 device_register+0x24/0x30 i2c_new_device+0x4e0/0xc44 v4l2_i2c_new_subdev_board+0xbc/0x290 v4l2_i2c_new_subdev+0xc8/0x104 em28xx_v4l2_init+0x1dd0/0x3770 Freed by task 6504: kfree+0x238/0x4e4 tuner_remove+0x144/0x1c0 i2c_device_remove+0xc8/0x290 __device_release_driver+0x314/0x5fc device_release_driver+0x30/0x44 bus_remove_device+0x244/0x490 device_del+0x350/0x900 device_unregister+0x28/0xd0 i2c_unregister_device+0x174/0x1d0 v4l2_device_unregister+0x224/0x380 em28xx_v4l2_init+0x1d90/0x3770 The buggy address belongs to the object at ffff8000d7ca2000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 776 bytes inside of 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800) The buggy address belongs to the page: page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0 flags: 0x7ff800000000100(slab) raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [2] Actually, it is allocated for struct tuner, and dvb_frontend is inside. |
| CVE-2024-43899 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null pointer deref in dcn20_resource.c Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] <TASK> [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu] |
| CVE-2024-43897 | In the Linux kernel, the following vulnerability has been resolved: net: drop bad gso csum_start and offset in virtio_net_hdr Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb for GSO packets. The function already checks that a checksum requested with VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets this might not hold for segs after segmentation. Syzkaller demonstrated to reach this warning in skb_checksum_help offset = skb_checksum_start_offset(skb); ret = -EINVAL; if (WARN_ON_ONCE(offset >= skb_headlen(skb))) By injecting a TSO packet: WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0 ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774 ip_finish_output_gso net/ipv4/ip_output.c:279 [inline] __ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301 iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4850 [inline] netdev_start_xmit include/linux/netdevice.h:4864 [inline] xmit_one net/core/dev.c:3595 [inline] dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611 __dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261 packet_snd net/packet/af_packet.c:3073 [inline] The geometry of the bad input packet at tcp_gso_segment: [ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0 [ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244 [ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0)) [ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536 ip_summed=3 complete_sw=0 valid=0 level=0) Mitigate with stricter input validation. csum_offset: for GSO packets, deduce the correct value from gso_type. This is already done for USO. Extend it to TSO. Let UFO be: udp[46]_ufo_fragment ignores these fields and always computes the checksum in software. csum_start: finding the real offset requires parsing to the transport header. Do not add a parser, use existing segmentation parsing. Thanks to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded. Again test both TSO and USO. Do not test UFO for the above reason, and do not test UDP tunnel offload. GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit from devices with no checksum offload"), but then still these fields are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no need to test for ip_summed == CHECKSUM_PARTIAL first. This revises an existing fix mentioned in the Fixes tag, which broke small packets with GSO offload, as detected by kselftests. |
| CVE-2024-43896 | In the Linux kernel, the following vulnerability has been resolved: ASoC: cs-amp-lib: Fix NULL pointer crash if efi.get_variable is NULL Call efi_rt_services_supported() to check that efi.get_variable exists before calling it. |
| CVE-2024-43895 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip Recompute DSC Params if no Stream on Link [why] Encounter NULL pointer dereference uner mst + dsc setup. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 [how] dsc recompute should be skipped if no mode change detected on the new request. If detected, keep checking whether the stream is already on current state or not. (cherry picked from commit 8151a6c13111b465dbabe07c19f572f7cbd16fef) |
| CVE-2024-43894 | In the Linux kernel, the following vulnerability has been resolved: drm/client: fix null pointer dereference in drm_client_modeset_probe In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is assigned to modeset->mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. |
| CVE-2024-43893 | In the Linux kernel, the following vulnerability has been resolved: serial: core: check uartclk for zero to avoid divide by zero Calling ioctl TIOCSSERIAL with an invalid baud_base can result in uartclk being zero, which will result in a divide by zero error in uart_get_divisor(). The check for uartclk being zero in uart_set_info() needs to be done before other settings are made as subsequent calls to ioctl TIOCSSERIAL for the same port would be impacted if the uartclk check was done where uartclk gets set. Oops: divide error: 0000 PREEMPT SMP KASAN PTI RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580) Call Trace: <TASK> serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576 drivers/tty/serial/8250/8250_port.c:2589) serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502 drivers/tty/serial/8250/8250_port.c:2741) serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862) uart_change_line_settings (./include/linux/spinlock.h:376 ./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222) uart_port_startup (drivers/tty/serial/serial_core.c:342) uart_startup (drivers/tty/serial/serial_core.c:368) uart_set_info (drivers/tty/serial/serial_core.c:1034) uart_set_info_user (drivers/tty/serial/serial_core.c:1059) tty_set_serial (drivers/tty/tty_io.c:2637) tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791) __x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907 fs/ioctl.c:893 fs/ioctl.c:893) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Rule: add |
| CVE-2024-43892 | In the Linux kernel, the following vulnerability has been resolved: memcg: protect concurrent access to mem_cgroup_idr Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs") decoupled the memcg IDs from the CSS ID space to fix the cgroup creation failures. It introduced IDR to maintain the memcg ID space. The IDR depends on external synchronization mechanisms for modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace() happen within css callback and thus are protected through cgroup_mutex from concurrent modifications. However idr_remove() for mem_cgroup_idr was not protected against concurrency and can be run concurrently for different memcgs when they hit their refcnt to zero. Fix that. We have been seeing list_lru based kernel crashes at a low frequency in our fleet for a long time. These crashes were in different part of list_lru code including list_lru_add(), list_lru_del() and reparenting code. Upon further inspection, it looked like for a given object (dentry and inode), the super_block's list_lru didn't have list_lru_one for the memcg of that object. The initial suspicions were either the object is not allocated through kmem_cache_alloc_lru() or somehow memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but returned success. No evidence were found for these cases. Looking more deeply, we started seeing situations where valid memcg's id is not present in mem_cgroup_idr and in some cases multiple valid memcgs have same id and mem_cgroup_idr is pointing to one of them. So, the most reasonable explanation is that these situations can happen due to race between multiple idr_remove() calls or race between idr_alloc()/idr_replace() and idr_remove(). These races are causing multiple memcgs to acquire the same ID and then offlining of one of them would cleanup list_lrus on the system for all of them. Later access from other memcgs to the list_lru cause crashes due to missing list_lru_one. |
| CVE-2024-43891 | In the Linux kernel, the following vulnerability has been resolved: tracing: Have format file honor EVENT_FILE_FL_FREED When eventfs was introduced, special care had to be done to coordinate the freeing of the file meta data with the files that are exposed to user space. The file meta data would have a ref count that is set when the file is created and would be decremented and freed after the last user that opened the file closed it. When the file meta data was to be freed, it would set a flag (EVENT_FILE_FL_FREED) to denote that the file is freed, and any new references made (like new opens or reads) would fail as it is marked freed. This allowed other meta data to be freed after this flag was set (under the event_mutex). All the files that were dynamically created in the events directory had a pointer to the file meta data and would call event_release() when the last reference to the user space file was closed. This would be the time that it is safe to free the file meta data. A shortcut was made for the "format" file. It's i_private would point to the "call" entry directly and not point to the file's meta data. This is because all format files are the same for the same "call", so it was thought there was no reason to differentiate them. The other files maintain state (like the "enable", "trigger", etc). But this meant if the file were to disappear, the "format" file would be unaware of it. This caused a race that could be trigger via the user_events test (that would create dynamic events and free them), and running a loop that would read the user_events format files: In one console run: # cd tools/testing/selftests/user_events # while true; do ./ftrace_test; done And in another console run: # cd /sys/kernel/tracing/ # while true; do cat events/user_events/__test_event/format; done 2>/dev/null With KASAN memory checking, it would trigger a use-after-free bug report (which was a real bug). This was because the format file was not checking the file's meta data flag "EVENT_FILE_FL_FREED", so it would access the event that the file meta data pointed to after the event was freed. After inspection, there are other locations that were found to not check the EVENT_FILE_FL_FREED flag when accessing the trace_event_file. Add a new helper function: event_file_file() that will make sure that the event_mutex is held, and will return NULL if the trace_event_file has the EVENT_FILE_FL_FREED flag set. Have the first reference of the struct file pointer use event_file_file() and check for NULL. Later uses can still use the event_file_data() helper function if the event_mutex is still held and was not released since the event_file_file() call. |
| CVE-2024-43890 | In the Linux kernel, the following vulnerability has been resolved: tracing: Fix overflow in get_free_elt() "tracing_map->next_elt" in get_free_elt() is at risk of overflowing. Once it overflows, new elements can still be inserted into the tracing_map even though the maximum number of elements (`max_elts`) has been reached. Continuing to insert elements after the overflow could result in the tracing_map containing "tracing_map->max_size" elements, leaving no empty entries. If any attempt is made to insert an element into a full tracing_map using `__tracing_map_insert()`, it will cause an infinite loop with preemption disabled, leading to a CPU hang problem. Fix this by preventing any further increments to "tracing_map->next_elt" once it reaches "tracing_map->max_elt". |
| CVE-2024-43889 | In the Linux kernel, the following vulnerability has been resolved: padata: Fix possible divide-by-0 panic in padata_mt_helper() We are hit with a not easily reproducible divide-by-0 panic in padata.c at bootup time. [ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI [ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1 [ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021 [ 10.017908] Workqueue: events_unbound padata_mt_helper [ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0 : [ 10.017963] Call Trace: [ 10.017968] <TASK> [ 10.018004] ? padata_mt_helper+0x39/0xb0 [ 10.018084] process_one_work+0x174/0x330 [ 10.018093] worker_thread+0x266/0x3a0 [ 10.018111] kthread+0xcf/0x100 [ 10.018124] ret_from_fork+0x31/0x50 [ 10.018138] ret_from_fork_asm+0x1a/0x30 [ 10.018147] </TASK> Looking at the padata_mt_helper() function, the only way a divide-by-0 panic can happen is when ps->chunk_size is 0. The way that chunk_size is initialized in padata_do_multithreaded(), chunk_size can be 0 when the min_chunk in the passed-in padata_mt_job structure is 0. Fix this divide-by-0 panic by making sure that chunk_size will be at least 1 no matter what the input parameters are. |
| CVE-2024-43888 | In the Linux kernel, the following vulnerability has been resolved: mm: list_lru: fix UAF for memory cgroup The mem_cgroup_from_slab_obj() is supposed to be called under rcu lock or cgroup_mutex or others which could prevent returned memcg from being freed. Fix it by adding missing rcu read lock. Found by code inspection. [[email protected]: only grab rcu lock when necessary, per Vlastimil] Link: https://lkml.kernel.org/r/[email protected] |
| CVE-2024-43887 | In the Linux kernel, the following vulnerability has been resolved: net/tcp: Disable TCP-AO static key after RCU grace period The lifetime of TCP-AO static_key is the same as the last tcp_ao_info. On the socket destruction tcp_ao_info ceases to be with RCU grace period, while tcp-ao static branch is currently deferred destructed. The static key definition is : DEFINE_STATIC_KEY_DEFERRED_FALSE(tcp_ao_needed, HZ); which means that if RCU grace period is delayed by more than a second and tcp_ao_needed is in the process of disablement, other CPUs may yet see tcp_ao_info which atent dead, but soon-to-be. And that breaks the assumption of static_key_fast_inc_not_disabled(). See the comment near the definition: > * The caller must make sure that the static key can't get disabled while > * in this function. It doesn't patch jump labels, only adds a user to > * an already enabled static key. Originally it was introduced in commit eb8c507296f6 ("jump_label: Prevent key->enabled int overflow"), which is needed for the atomic contexts, one of which would be the creation of a full socket from a request socket. In that atomic context, it's known by the presence of the key (md5/ao) that the static branch is already enabled. So, the ref counter for that static branch is just incremented instead of holding the proper mutex. static_key_fast_inc_not_disabled() is just a helper for such usage case. But it must not be used if the static branch could get disabled in parallel as it's not protected by jump_label_mutex and as a result, races with jump_label_update() implementation details. Happened on netdev test-bot[1], so not a theoretical issue: [] jump_label: Fatal kernel bug, unexpected op at tcp_inbound_hash+0x1a7/0x870 [ffffffffa8c4e9b7] (eb 50 0f 1f 44 != 66 90 0f 1f 00)) size:2 type:1 [] ------------[ cut here ]------------ [] kernel BUG at arch/x86/kernel/jump_label.c:73! [] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [] CPU: 3 PID: 243 Comm: kworker/3:3 Not tainted 6.10.0-virtme #1 [] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [] Workqueue: events jump_label_update_timeout [] RIP: 0010:__jump_label_patch+0x2f6/0x350 ... [] Call Trace: [] <TASK> [] arch_jump_label_transform_queue+0x6c/0x110 [] __jump_label_update+0xef/0x350 [] __static_key_slow_dec_cpuslocked.part.0+0x3c/0x60 [] jump_label_update_timeout+0x2c/0x40 [] process_one_work+0xe3b/0x1670 [] worker_thread+0x587/0xce0 [] kthread+0x28a/0x350 [] ret_from_fork+0x31/0x70 [] ret_from_fork_asm+0x1a/0x30 [] </TASK> [] Modules linked in: veth [] ---[ end trace 0000000000000000 ]--- [] RIP: 0010:__jump_label_patch+0x2f6/0x350 [1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao-dbg/results/696681/5-connect-deny-ipv6/stderr |
| CVE-2024-43886 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check in resource_log_pipe_topology_update [WHY] When switching from "Extend" to "Second Display Only" we sometimes call resource_get_otg_master_for_stream on a stream for the eDP, which is disconnected. This leads to a null pointer dereference. [HOW] Added a null check in dc_resource.c/resource_log_pipe_topology_update. |
| CVE-2024-43884 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Add error handling to pair_device() hci_conn_params_add() never checks for a NULL value and could lead to a NULL pointer dereference causing a crash. Fixed by adding error handling in the function. |
| CVE-2024-43883 | In the Linux kernel, the following vulnerability has been resolved: usb: vhci-hcd: Do not drop references before new references are gained At a few places the driver carries stale pointers to references that can still be used. Make sure that does not happen. This strictly speaking closes ZDI-CAN-22273, though there may be similar races in the driver. |
| CVE-2024-43882 | In the Linux kernel, the following vulnerability has been resolved: exec: Fix ToCToU between perm check and set-uid/gid usage When opening a file for exec via do_filp_open(), permission checking is done against the file's metadata at that moment, and on success, a file pointer is passed back. Much later in the execve() code path, the file metadata (specifically mode, uid, and gid) is used to determine if/how to set the uid and gid. However, those values may have changed since the permissions check, meaning the execution may gain unintended privileges. For example, if a file could change permissions from executable and not set-id: ---------x 1 root root 16048 Aug 7 13:16 target to set-id and non-executable: ---S------ 1 root root 16048 Aug 7 13:16 target it is possible to gain root privileges when execution should have been disallowed. While this race condition is rare in real-world scenarios, it has been observed (and proven exploitable) when package managers are updating the setuid bits of installed programs. Such files start with being world-executable but then are adjusted to be group-exec with a set-uid bit. For example, "chmod o-x,u+s target" makes "target" executable only by uid "root" and gid "cdrom", while also becoming setuid-root: -rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target becomes: -rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target But racing the chmod means users without group "cdrom" membership can get the permission to execute "target" just before the chmod, and when the chmod finishes, the exec reaches brpm_fill_uid(), and performs the setuid to root, violating the expressed authorization of "only cdrom group members can setuid to root". Re-check that we still have execute permissions in case the metadata has changed. It would be better to keep a copy from the perm-check time, but until we can do that refactoring, the least-bad option is to do a full inode_permission() call (under inode lock). It is understood that this is safe against dead-locks, but hardly optimal. |
| CVE-2024-43881 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: change DMA direction while mapping reinjected packets For fragmented packets, ath12k reassembles each fragment as a normal packet and then reinjects it into HW ring. In this case, the DMA direction should be DMA_TO_DEVICE, not DMA_FROM_DEVICE. Otherwise, an invalid payload may be reinjected into the HW and subsequently delivered to the host. Given that arbitrary memory can be allocated to the skb buffer, knowledge about the data contained in the reinjected buffer is lacking. Consequently, there’s a risk of private information being leaked. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 |
| CVE-2024-43880 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_erp: Fix object nesting warning ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM (A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can contain more ACLs (i.e., tc filters), but the number of masks in each region (i.e., tc chain) is limited. In order to mitigate the effects of the above limitation, the device allows filters to share a single mask if their masks only differ in up to 8 consecutive bits. For example, dst_ip/25 can be represented using dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the number of masks being used (and therefore does not support mask aggregation), but can contain a limited number of filters. The driver uses the "objagg" library to perform the mask aggregation by passing it objects that consist of the filter's mask and whether the filter is to be inserted into the A-TCAM or the C-TCAM since filters in different TCAMs cannot share a mask. The set of created objects is dependent on the insertion order of the filters and is not necessarily optimal. Therefore, the driver will periodically ask the library to compute a more optimal set ("hints") by looking at all the existing objects. When the library asks the driver whether two objects can be aggregated the driver only compares the provided masks and ignores the A-TCAM / C-TCAM indication. This is the right thing to do since the goal is to move as many filters as possible to the A-TCAM. The driver also forbids two identical masks from being aggregated since this can only happen if one was intentionally put in the C-TCAM to avoid a conflict in the A-TCAM. The above can result in the following set of hints: H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta After getting the hints from the library the driver will start migrating filters from one region to another while consulting the computed hints and instructing the device to perform a lookup in both regions during the transition. Assuming a filter with mask X is being migrated into the A-TCAM in the new region, the hints lookup will return H1. Since H2 is the parent of H1, the library will try to find the object associated with it and create it if necessary in which case another hints lookup (recursive) will be performed. This hints lookup for {mask Y, A-TCAM} will either return H2 or H3 since the driver passes the library an object comparison function that ignores the A-TCAM / C-TCAM indication. This can eventually lead to nested objects which are not supported by the library [1]. Fix by removing the object comparison function from both the driver and the library as the driver was the only user. That way the lookup will only return exact matches. I do not have a reliable reproducer that can reproduce the issue in a timely manner, but before the fix the issue would reproduce in several minutes and with the fix it does not reproduce in over an hour. Note that the current usefulness of the hints is limited because they include the C-TCAM indication and represent aggregation that cannot actually happen. This will be addressed in net-next. [1] WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0 Modules linked in: CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42 Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0 [...] Call Trace: <TASK> __objagg_obj_get+0x2bb/0x580 objagg_obj_get+0xe/0x80 mlxsw_sp_acl_erp_mask_get+0xb5/0xf0 mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370 |
| CVE-2024-43879 | In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: handle 2x996 RU allocation in cfg80211_calculate_bitrate_he() Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in cfg80211_calculate_bitrate_he(), leading to below warning: kernel: invalid HE MCS: bw:6, ru:6 kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211] Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth. |
| CVE-2024-43878 | In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix input error path memory access When there is a misconfiguration of input state slow path KASAN report error. Fix this error. west login: [ 52.987278] eth1: renamed from veth11 [ 53.078814] eth1: renamed from veth21 [ 53.181355] eth1: renamed from veth31 [ 54.921702] ================================================================== [ 54.922602] BUG: KASAN: wild-memory-access in xfrmi_rcv_cb+0x2d/0x295 [ 54.923393] Read of size 8 at addr 6b6b6b6b00000000 by task ping/512 [ 54.924169] [ 54.924386] CPU: 0 PID: 512 Comm: ping Not tainted 6.9.0-08574-gcd29a4313a1b #25 [ 54.925290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 54.926401] Call Trace: [ 54.926731] <IRQ> [ 54.927009] dump_stack_lvl+0x2a/0x3b [ 54.927478] kasan_report+0x84/0xa6 [ 54.927930] ? xfrmi_rcv_cb+0x2d/0x295 [ 54.928410] xfrmi_rcv_cb+0x2d/0x295 [ 54.928872] ? xfrm4_rcv_cb+0x3d/0x5e [ 54.929354] xfrm4_rcv_cb+0x46/0x5e [ 54.929804] xfrm_rcv_cb+0x7e/0xa1 [ 54.930240] xfrm_input+0x1b3a/0x1b96 [ 54.930715] ? xfrm_offload+0x41/0x41 [ 54.931182] ? raw_rcv+0x292/0x292 [ 54.931617] ? nf_conntrack_confirm+0xa2/0xa2 [ 54.932158] ? skb_sec_path+0xd/0x3f [ 54.932610] ? xfrmi_input+0x90/0xce [ 54.933066] xfrm4_esp_rcv+0x33/0x54 [ 54.933521] ip_protocol_deliver_rcu+0xd7/0x1b2 [ 54.934089] ip_local_deliver_finish+0x110/0x120 [ 54.934659] ? ip_protocol_deliver_rcu+0x1b2/0x1b2 [ 54.935248] NF_HOOK.constprop.0+0xf8/0x138 [ 54.935767] ? ip_sublist_rcv_finish+0x68/0x68 [ 54.936317] ? secure_tcpv6_ts_off+0x23/0x168 [ 54.936859] ? ip_protocol_deliver_rcu+0x1b2/0x1b2 [ 54.937454] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d [ 54.938135] NF_HOOK.constprop.0+0xf8/0x138 [ 54.938663] ? ip_sublist_rcv_finish+0x68/0x68 [ 54.939220] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d [ 54.939904] ? ip_local_deliver_finish+0x120/0x120 [ 54.940497] __netif_receive_skb_one_core+0xc9/0x107 [ 54.941121] ? __netif_receive_skb_list_core+0x1c2/0x1c2 [ 54.941771] ? blk_mq_start_stopped_hw_queues+0xc7/0xf9 [ 54.942413] ? blk_mq_start_stopped_hw_queue+0x38/0x38 [ 54.943044] ? virtqueue_get_buf_ctx+0x295/0x46b [ 54.943618] process_backlog+0xb3/0x187 [ 54.944102] __napi_poll.constprop.0+0x57/0x1a7 [ 54.944669] net_rx_action+0x1cb/0x380 [ 54.945150] ? __napi_poll.constprop.0+0x1a7/0x1a7 [ 54.945744] ? vring_new_virtqueue+0x17a/0x17a [ 54.946300] ? note_interrupt+0x2cd/0x367 [ 54.946805] handle_softirqs+0x13c/0x2c9 [ 54.947300] do_softirq+0x5f/0x7d [ 54.947727] </IRQ> [ 54.948014] <TASK> [ 54.948300] __local_bh_enable_ip+0x48/0x62 [ 54.948832] __neigh_event_send+0x3fd/0x4ca [ 54.949361] neigh_resolve_output+0x1e/0x210 [ 54.949896] ip_finish_output2+0x4bf/0x4f0 [ 54.950410] ? __ip_finish_output+0x171/0x1b8 [ 54.950956] ip_send_skb+0x25/0x57 [ 54.951390] raw_sendmsg+0xf95/0x10c0 [ 54.951850] ? check_new_pages+0x45/0x71 [ 54.952343] ? raw_hash_sk+0x21b/0x21b [ 54.952815] ? kernel_init_pages+0x42/0x51 [ 54.953337] ? prep_new_page+0x44/0x51 [ 54.953811] ? get_page_from_freelist+0x72b/0x915 [ 54.954390] ? signal_pending_state+0x77/0x77 [ 54.954936] ? preempt_count_sub+0x14/0xb3 [ 54.955450] ? __might_resched+0x8a/0x240 [ 54.955951] ? __might_sleep+0x25/0xa0 [ 54.956424] ? first_zones_zonelist+0x2c/0x43 [ 54.956977] ? __rcu_read_lock+0x2d/0x3a [ 54.957476] ? __pte_offset_map+0x32/0xa4 [ 54.957980] ? __might_resched+0x8a/0x240 [ 54.958483] ? __might_sleep+0x25/0xa0 [ 54.958963] ? inet_send_prepare+0x54/0x54 [ 54.959478] ? sock_sendmsg_nosec+0x42/0x6c [ 54.960000] sock_sendmsg_nosec+0x42/0x6c [ 54.960502] __sys_sendto+0x15d/0x1cc [ 54.960966] ? __x64_sys_getpeername+0x44/0x44 [ 54.961522] ? __handle_mm_fault+0x679/0xae4 [ 54.962068] ? find_vma+0x6b/0x ---truncated--- |
| CVE-2024-43877 | In the Linux kernel, the following vulnerability has been resolved: media: pci: ivtv: Add check for DMA map result In case DMA fails, 'dma->SG_length' is 0. This value is later used to access 'dma->SGarray[dma->SG_length - 1]', which will cause out of bounds access. Add check to return early on invalid value. Adjust warnings accordingly. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-43876 | In the Linux kernel, the following vulnerability has been resolved: PCI: rcar: Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() Avoid large backtrace, it is sufficient to warn the user that there has been a link problem. Either the link has failed and the system is in need of maintenance, or the link continues to work and user has been informed. The message from the warning can be looked up in the sources. This makes an actual link issue less verbose. First of all, this controller has a limitation in that the controller driver has to assist the hardware with transition to L1 link state by writing L1IATN to PMCTRL register, the L1 and L0 link state switching is not fully automatic on this controller. In case of an ASMedia ASM1062 PCIe SATA controller which does not support ASPM, on entry to suspend or during platform pm_test, the SATA controller enters D3hot state and the link enters L1 state. If the SATA controller wakes up before rcar_pcie_wakeup() was called and returns to D0, the link returns to L0 before the controller driver even started its transition to L1 link state. At this point, the SATA controller did send an PM_ENTER_L1 DLLP to the PCIe controller and the PCIe controller received it, and the PCIe controller did set PMSR PMEL1RX bit. Once rcar_pcie_wakeup() is called, if the link is already back in L0 state and PMEL1RX bit is set, the controller driver has no way to determine if it should perform the link transition to L1 state, or treat the link as if it is in L0 state. Currently the driver attempts to perform the transition to L1 link state unconditionally, which in this specific case fails with a PMSR L1FAEG poll timeout, however the link still works as it is already back in L0 state. Reduce this warning verbosity. In case the link is really broken, the rcar_pcie_config_access() would fail, otherwise it will succeed and any system with this controller and ASM1062 can suspend without generating a backtrace. |
| CVE-2024-43875 | In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Clean up error handling in vpci_scan_bus() Smatch complains about inconsistent NULL checking in vpci_scan_bus(): drivers/pci/endpoint/functions/pci-epf-vntb.c:1024 vpci_scan_bus() error: we previously assumed 'vpci_bus' could be null (see line 1021) Instead of printing an error message and then crashing we should return an error code and clean up. Also the NULL check is reversed so it prints an error for success instead of failure. |
| CVE-2024-43874 | In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix null pointer dereference in __sev_snp_shutdown_locked Fix a null pointer dereference induced by DEBUG_TEST_DRIVER_REMOVE. Return from __sev_snp_shutdown_locked() if the psp_device or the sev_device structs are not initialized. Without the fix, the driver will produce the following splat: ccp 0000:55:00.5: enabling device (0000 -> 0002) ccp 0000:55:00.5: sev enabled ccp 0000:55:00.5: psp enabled BUG: kernel NULL pointer dereference, address: 00000000000000f0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI CPU: 262 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc1+ #29 RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808 RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0 R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8 R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x6f/0xb0 ? __die+0xcc/0xf0 ? page_fault_oops+0x330/0x3a0 ? save_trace+0x2a5/0x360 ? do_user_addr_fault+0x583/0x630 ? exc_page_fault+0x81/0x120 ? asm_exc_page_fault+0x2b/0x30 ? __sev_snp_shutdown_locked+0x2e/0x150 __sev_firmware_shutdown+0x349/0x5b0 ? pm_runtime_barrier+0x66/0xe0 sev_dev_destroy+0x34/0xb0 psp_dev_destroy+0x27/0x60 sp_destroy+0x39/0x90 sp_pci_remove+0x22/0x60 pci_device_remove+0x4e/0x110 really_probe+0x271/0x4e0 __driver_probe_device+0x8f/0x160 driver_probe_device+0x24/0x120 __driver_attach+0xc7/0x280 ? driver_attach+0x30/0x30 bus_for_each_dev+0x10d/0x130 driver_attach+0x22/0x30 bus_add_driver+0x171/0x2b0 ? unaccepted_memory_init_kdump+0x20/0x20 driver_register+0x67/0x100 __pci_register_driver+0x83/0x90 sp_pci_init+0x22/0x30 sp_mod_init+0x13/0x30 do_one_initcall+0xb8/0x290 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? stack_depot_save_flags+0x21e/0x6a0 ? local_clock+0x1c/0x60 ? stack_depot_save_flags+0x21e/0x6a0 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __lock_acquire+0xd90/0xe30 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __create_object+0x66/0x100 ? local_clock+0x1c/0x60 ? __create_object+0x66/0x100 ? parameq+0x1b/0x90 ? parse_one+0x6d/0x1d0 ? parse_args+0xd7/0x1f0 ? do_initcall_level+0x180/0x180 do_initcall_level+0xb0/0x180 do_initcalls+0x60/0xa0 ? kernel_init+0x1f/0x1d0 do_basic_setup+0x41/0x50 kernel_init_freeable+0x1ac/0x230 ? rest_init+0x1f0/0x1f0 kernel_init+0x1f/0x1d0 ? rest_init+0x1f0/0x1f0 ret_from_fork+0x3d/0x50 ? rest_init+0x1f0/0x1f0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: CR2: 00000000000000f0 ---[ end trace 0000000000000000 ]--- RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000 ---truncated--- |
| CVE-2024-43873 | In the Linux kernel, the following vulnerability has been resolved: vhost/vsock: always initialize seqpacket_allow There are two issues around seqpacket_allow: 1. seqpacket_allow is not initialized when socket is created. Thus if features are never set, it will be read uninitialized. 2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared, then seqpacket_allow will not be cleared appropriately (existing apps I know about don't usually do this but it's legal and there's no way to be sure no one relies on this). To fix: - initialize seqpacket_allow after allocation - set it unconditionally in set_features |
| CVE-2024-43872 | In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix soft lockup under heavy CEQE load CEQEs are handled in interrupt handler currently. This may cause the CPU core staying in interrupt context too long and lead to soft lockup under heavy load. Handle CEQEs in BH workqueue and set an upper limit for the number of CEQE handled by a single call of work handler. |
| CVE-2024-43871 | In the Linux kernel, the following vulnerability has been resolved: devres: Fix memory leakage caused by driver API devm_free_percpu() It will cause memory leakage when use driver API devm_free_percpu() to free memory allocated by devm_alloc_percpu(), fixed by using devres_release() instead of devres_destroy() within devm_free_percpu(). |
| CVE-2024-43870 | In the Linux kernel, the following vulnerability has been resolved: perf: Fix event leak upon exit When a task is scheduled out, pending sigtrap deliveries are deferred to the target task upon resume to userspace via task_work. However failures while adding an event's callback to the task_work engine are ignored. And since the last call for events exit happen after task work is eventually closed, there is a small window during which pending sigtrap can be queued though ignored, leaking the event refcount addition such as in the following scenario: TASK A ----- do_exit() exit_task_work(tsk); <IRQ> perf_event_overflow() event->pending_sigtrap = pending_id; irq_work_queue(&event->pending_irq); </IRQ> =========> PREEMPTION: TASK A -> TASK B event_sched_out() event->pending_sigtrap = 0; atomic_long_inc_not_zero(&event->refcount) // FAILS: task work has exited task_work_add(&event->pending_task) [...] <IRQ WORK> perf_pending_irq() // early return: event->oncpu = -1 </IRQ WORK> [...] =========> TASK B -> TASK A perf_event_exit_task(tsk) perf_event_exit_event() free_event() WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1) // leak event due to unexpected refcount == 2 As a result the event is never released while the task exits. Fix this with appropriate task_work_add()'s error handling. |
| CVE-2024-43869 | In the Linux kernel, the following vulnerability has been resolved: perf: Fix event leak upon exec and file release The perf pending task work is never waited upon the matching event release. In the case of a child event, released via free_event() directly, this can potentially result in a leaked event, such as in the following scenario that doesn't even require a weak IRQ work implementation to trigger: schedule() prepare_task_switch() =======> <NMI> perf_event_overflow() event->pending_sigtrap = ... irq_work_queue(&event->pending_irq) <======= </NMI> perf_event_task_sched_out() event_sched_out() event->pending_sigtrap = 0; atomic_long_inc_not_zero(&event->refcount) task_work_add(&event->pending_task) finish_lock_switch() =======> <IRQ> perf_pending_irq() //do nothing, rely on pending task work <======= </IRQ> begin_new_exec() perf_event_exit_task() perf_event_exit_event() // If is child event free_event() WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1) // event is leaked Similar scenarios can also happen with perf_event_remove_on_exec() or simply against concurrent perf_event_release(). Fix this with synchonizing against the possibly remaining pending task work while freeing the event, just like is done with remaining pending IRQ work. This means that the pending task callback neither need nor should hold a reference to the event, preventing it from ever beeing freed. |
| CVE-2024-43868 | In the Linux kernel, the following vulnerability has been resolved: riscv/purgatory: align riscv_kernel_entry When alignment handling is delegated to the kernel, everything must be word-aligned in purgatory, since the trap handler is then set to the kexec one. Without the alignment, hitting the exception would ultimately crash. On other occasions, the kernel's handler would take care of exceptions. This has been tested on a JH7110 SoC with oreboot and its SBI delegating unaligned access exceptions and the kernel configured to handle them. |
| CVE-2024-43867 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: prime: fix refcount underflow Calling nouveau_bo_ref() on a nouveau_bo without initializing it (and hence the backing ttm_bo) leads to a refcount underflow. Instead of calling nouveau_bo_ref() in the unwind path of drm_gem_object_init(), clean things up manually. (cherry picked from commit 1b93f3e89d03cfc576636e195466a0d728ad8de5) |
| CVE-2024-43866 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Always drain health in shutdown callback There is no point in recovery during device shutdown. if health work started need to wait for it to avoid races and NULL pointer access. Hence, drain health WQ on shutdown callback. |
| CVE-2024-43865 | In the Linux kernel, the following vulnerability has been resolved: s390/fpu: Re-add exception handling in load_fpu_state() With the recent rewrite of the fpu code exception handling for the lfpc instruction within load_fpu_state() was erroneously removed. Add it again to prevent that loading invalid floating point register values cause an unhandled specification exception. |
| CVE-2024-43864 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix CT entry update leaks of modify header context The cited commit allocates a new modify header to replace the old one when updating CT entry. But if failed to allocate a new one, eg. exceed the max number firmware can support, modify header will be an error pointer that will trigger a panic when deallocating it. And the old modify header point is copied to old attr. When the old attr is freed, the old modify header is lost. Fix it by restoring the old attr to attr when failed to allocate a new modify header context. So when the CT entry is freed, the right modify header context will be freed. And the panic of accessing error pointer is also fixed. |
| CVE-2024-43863 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix a deadlock in dma buf fence polling Introduce a version of the fence ops that on release doesn't remove the fence from the pending list, and thus doesn't require a lock to fix poll->fence wait->fence unref deadlocks. vmwgfx overwrites the wait callback to iterate over the list of all fences and update their status, to do that it holds a lock to prevent the list modifcations from other threads. The fence destroy callback both deletes the fence and removes it from the list of pending fences, for which it holds a lock. dma buf polling cb unrefs a fence after it's been signaled: so the poll calls the wait, which signals the fences, which are being destroyed. The destruction tries to acquire the lock on the pending fences list which it can never get because it's held by the wait from which it was called. Old bug, but not a lot of userspace apps were using dma-buf polling interfaces. Fix those, in particular this fixes KDE stalls/deadlock. |
| CVE-2024-43862 | In the Linux kernel, the following vulnerability has been resolved: net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex The carrier_lock spinlock protects the carrier detection. While it is held, framer_get_status() is called which in turn takes a mutex. This is not correct and can lead to a deadlock. A run with PROVE_LOCKING enabled detected the issue: [ BUG: Invalid wait context ] ... c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78 other info that might help us debug this: context-{4:4} 2 locks held by ifconfig/146: #0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664 #1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98 Avoid the spinlock usage and convert carrier_lock to a mutex. |
| CVE-2024-43861 | In the Linux kernel, the following vulnerability has been resolved: net: usb: qmi_wwan: fix memory leak for not ip packets Free the unused skb when not ip packets arrive. |
| CVE-2024-43860 | In the Linux kernel, the following vulnerability has been resolved: remoteproc: imx_rproc: Skip over memory region when node value is NULL In imx_rproc_addr_init() "nph = of_count_phandle_with_args()" just counts number of phandles. But phandles may be empty. So of_parse_phandle() in the parsing loop (0 < a < nph) may return NULL which is later dereferenced. Adjust this issue by adding NULL-return check. Found by Linux Verification Center (linuxtesting.org) with SVACE. [Fixed title to fit within the prescribed 70-75 charcters] |
| CVE-2024-43859 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate preallocated blocks in f2fs_file_open() chenyuwen reports a f2fs bug as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000011 fscrypt_set_bio_crypt_ctx+0x78/0x1e8 f2fs_grab_read_bio+0x78/0x208 f2fs_submit_page_read+0x44/0x154 f2fs_get_read_data_page+0x288/0x5f4 f2fs_get_lock_data_page+0x60/0x190 truncate_partial_data_page+0x108/0x4fc f2fs_do_truncate_blocks+0x344/0x5f0 f2fs_truncate_blocks+0x6c/0x134 f2fs_truncate+0xd8/0x200 f2fs_iget+0x20c/0x5ac do_garbage_collect+0x5d0/0xf6c f2fs_gc+0x22c/0x6a4 f2fs_disable_checkpoint+0xc8/0x310 f2fs_fill_super+0x14bc/0x1764 mount_bdev+0x1b4/0x21c f2fs_mount+0x20/0x30 legacy_get_tree+0x50/0xbc vfs_get_tree+0x5c/0x1b0 do_new_mount+0x298/0x4cc path_mount+0x33c/0x5fc __arm64_sys_mount+0xcc/0x15c invoke_syscall+0x60/0x150 el0_svc_common+0xb8/0xf8 do_el0_svc+0x28/0xa0 el0_svc+0x24/0x84 el0t_64_sync_handler+0x88/0xec It is because inode.i_crypt_info is not initialized during below path: - mount - f2fs_fill_super - f2fs_disable_checkpoint - f2fs_gc - f2fs_iget - f2fs_truncate So, let's relocate truncation of preallocated blocks to f2fs_file_open(), after fscrypt_file_open(). |
| CVE-2024-43858 | In the Linux kernel, the following vulnerability has been resolved: jfs: Fix array-index-out-of-bounds in diFree |
| CVE-2024-43857 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix null reference error when checking end of zone This patch fixes a potentially null pointer being accessed by is_end_zone_blkaddr() that checks the last block of a zone when f2fs is mounted as a single device. |
| CVE-2024-43856 | In the Linux kernel, the following vulnerability has been resolved: dma: fix call order in dmam_free_coherent dmam_free_coherent() frees a DMA allocation, which makes the freed vaddr available for reuse, then calls devres_destroy() to remove and free the data structure used to track the DMA allocation. Between the two calls, it is possible for a concurrent task to make an allocation with the same vaddr and add it to the devres list. If this happens, there will be two entries in the devres list with the same vaddr and devres_destroy() can free the wrong entry, triggering the WARN_ON() in dmam_match. Fix by destroying the devres entry before freeing the DMA allocation. kokonut //net/encryption http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03 |
| CVE-2024-43855 | In the Linux kernel, the following vulnerability has been resolved: md: fix deadlock between mddev_suspend and flush bio Deadlock occurs when mddev is being suspended while some flush bio is in progress. It is a complex issue. T1. the first flush is at the ending stage, it clears 'mddev->flush_bio' and tries to submit data, but is blocked because mddev is suspended by T4. T2. the second flush sets 'mddev->flush_bio', and attempts to queue md_submit_flush_data(), which is already running (T1) and won't execute again if on the same CPU as T1. T3. the third flush inc active_io and tries to flush, but is blocked because 'mddev->flush_bio' is not NULL (set by T2). T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc by T3. T1 T2 T3 T4 (flush 1) (flush 2) (third 3) (suspend) md_submit_flush_data mddev->flush_bio = NULL; . . md_flush_request . mddev->flush_bio = bio . queue submit_flushes . . . . md_handle_request . . active_io + 1 . . md_flush_request . . wait !mddev->flush_bio . . . . mddev_suspend . . wait !active_io . . . submit_flushes . queue_work md_submit_flush_data . //md_submit_flush_data is already running (T1) . md_handle_request wait resume The root issue is non-atomic inc/dec of active_io during flush process. active_io is dec before md_submit_flush_data is queued, and inc soon after md_submit_flush_data() run. md_flush_request active_io + 1 submit_flushes active_io - 1 md_submit_flush_data md_handle_request active_io + 1 make_request active_io - 1 If active_io is dec after md_handle_request() instead of within submit_flushes(), make_request() can be called directly intead of md_handle_request() in md_submit_flush_data(), and active_io will only inc and dec once in the whole flush process. Deadlock will be fixed. Additionally, the only difference between fixing the issue and before is that there is no return error handling of make_request(). But after previous patch cleaned md_write_start(), make_requst() only return error in raid5_make_request() by dm-raid, see commit 41425f96d7aa ("dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape)". Since dm always splits data and flush operation into two separate io, io size of flush submitted by dm always is 0, make_request() will not be called in md_submit_flush_data(). To prevent future modifications from introducing issues, add WARN_ON to ensure make_request() no error is returned in this context. |
| CVE-2024-43854 | In the Linux kernel, the following vulnerability has been resolved: block: initialize integrity buffer to zero before writing it to media Metadata added by bio_integrity_prep is using plain kmalloc, which leads to random kernel memory being written media. For PI metadata this is limited to the app tag that isn't used by kernel generated metadata, but for non-PI metadata the entire buffer leaks kernel memory. Fix this by adding the __GFP_ZERO flag to allocations for writes. |
| CVE-2024-43853 | In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Prevent UAF in proc_cpuset_show() An UAF can happen when /proc/cpuset is read as reported in [1]. This can be reproduced by the following methods: 1.add an mdelay(1000) before acquiring the cgroup_lock In the cgroup_path_ns function. 2.$cat /proc/<pid>/cpuset repeatly. 3.$mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset/ $umount /sys/fs/cgroup/cpuset/ repeatly. The race that cause this bug can be shown as below: (umount) | (cat /proc/<pid>/cpuset) css_release | proc_cpuset_show css_release_work_fn | css = task_get_css(tsk, cpuset_cgrp_id); css_free_rwork_fn | cgroup_path_ns(css->cgroup, ...); cgroup_destroy_root | mutex_lock(&cgroup_mutex); rebind_subsystems | cgroup_free_root | | // cgrp was freed, UAF | cgroup_path_ns_locked(cgrp,..); When the cpuset is initialized, the root node top_cpuset.css.cgrp will point to &cgrp_dfl_root.cgrp. In cgroup v1, the mount operation will allocate cgroup_root, and top_cpuset.css.cgrp will point to the allocated &cgroup_root.cgrp. When the umount operation is executed, top_cpuset.css.cgrp will be rebound to &cgrp_dfl_root.cgrp. The problem is that when rebinding to cgrp_dfl_root, there are cases where the cgroup_root allocated by setting up the root for cgroup v1 is cached. This could lead to a Use-After-Free (UAF) if it is subsequently freed. The descendant cgroups of cgroup v1 can only be freed after the css is released. However, the css of the root will never be released, yet the cgroup_root should be freed when it is unmounted. This means that obtaining a reference to the css of the root does not guarantee that css.cgrp->root will not be freed. Fix this problem by using rcu_read_lock in proc_cpuset_show(). As cgroup_root is kfree_rcu after commit d23b5c577715 ("cgroup: Make operations on the cgroup root_list RCU safe"), css->cgroup won't be freed during the critical section. To call cgroup_path_ns_locked, css_set_lock is needed, so it is safe to replace task_get_css with task_css. [1] https://syzkaller.appspot.com/bug?extid=9b1ff7be974a403aa4cd |
| CVE-2024-43852 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc2991) re-order conditions to fix off by one bug LTC2991_T_INT_CH_NR is 4. The st->temp_en[] array has LTC2991_MAX_CHANNEL (4) elements. Thus if "channel" is equal to LTC2991_T_INT_CH_NR then we have read one element beyond the end of the array. Flip the conditions around so that we check if "channel" is valid before using it as an array index. |
| CVE-2024-43851 | In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: rename cpu_number1 to dummy_cpu_number The per cpu variable cpu_number1 is passed to xlnx_event_handler as argument "dev_id", but it is not used in this function. So drop the initialization of this variable and rename it to dummy_cpu_number. This patch is to fix the following call trace when the kernel option CONFIG_DEBUG_ATOMIC_SLEEP is enabled: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0 #53 Hardware name: Xilinx Versal vmk180 Eval board rev1.1 (QSPI) (DT) Call trace: dump_backtrace+0xd0/0xe0 show_stack+0x18/0x40 dump_stack_lvl+0x7c/0xa0 dump_stack+0x18/0x34 __might_resched+0x10c/0x140 __might_sleep+0x4c/0xa0 __kmem_cache_alloc_node+0xf4/0x168 kmalloc_trace+0x28/0x38 __request_percpu_irq+0x74/0x138 xlnx_event_manager_probe+0xf8/0x298 platform_probe+0x68/0xd8 |
| CVE-2024-43850 | In the Linux kernel, the following vulnerability has been resolved: soc: qcom: icc-bwmon: Fix refcount imbalance seen during bwmon_remove The following warning is seen during bwmon_remove due to refcount imbalance, fix this by releasing the OPPs after use. Logs: WARNING: at drivers/opp/core.c:1640 _opp_table_kref_release+0x150/0x158 Hardware name: Qualcomm Technologies, Inc. X1E80100 CRD (DT) ... Call trace: _opp_table_kref_release+0x150/0x158 dev_pm_opp_remove_table+0x100/0x1b4 devm_pm_opp_of_table_release+0x10/0x1c devm_action_release+0x14/0x20 devres_release_all+0xa4/0x104 device_unbind_cleanup+0x18/0x60 device_release_driver_internal+0x1ec/0x228 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 bwmon_driver_exit+0x18/0x524 [icc_bwmon] __arm64_sys_delete_module+0x184/0x264 invoke_syscall+0x48/0x118 el0_svc_common.constprop.0+0xc8/0xe8 do_el0_svc+0x20/0x2c el0_svc+0x34/0xdc el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 --[ end trace 0000000000000000 ]--- |
| CVE-2024-43849 | In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pdr: protect locator_addr with the main mutex If the service locator server is restarted fast enough, the PDR can rewrite locator_addr fields concurrently. Protect them by placing modification of those fields under the main pdr->lock. |
| CVE-2024-43848 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix TTLM teardown work The worker calculates the wrong sdata pointer, so if it ever runs, it'll crash. Fix that. |
| CVE-2024-43847 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix invalid memory access while processing fragmented packets The monitor ring and the reo reinject ring share the same ring mask index. When the driver receives an interrupt for the reo reinject ring, the monitor ring is also processed, leading to invalid memory access. Since monitor support is not yet enabled in ath12k, the ring mask for the monitor ring should be removed. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 |
| CVE-2024-43846 | In the Linux kernel, the following vulnerability has been resolved: lib: objagg: Fix general protection fault The library supports aggregation of objects into other objects only if the parent object does not have a parent itself. That is, nesting is not supported. Aggregation happens in two cases: Without and with hints, where hints are a pre-computed recommendation on how to aggregate the provided objects. Nesting is not possible in the first case due to a check that prevents it, but in the second case there is no check because the assumption is that nesting cannot happen when creating objects based on hints. The violation of this assumption leads to various warnings and eventually to a general protection fault [1]. Before fixing the root cause, error out when nesting happens and warn. [1] general protection fault, probably for non-canonical address 0xdead000000000d90: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1083 Comm: kworker/1:9 Tainted: G W 6.9.0-rc6-custom-gd9b4f1cca7fb #7 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_erp_bf_insert+0x25/0x80 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0x256/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> |
| CVE-2024-43845 | In the Linux kernel, the following vulnerability has been resolved: udf: Fix bogus checksum computation in udf_rename() Syzbot reports uninitialized memory access in udf_rename() when updating checksum of '..' directory entry of a moved directory. This is indeed true as we pass on-stack diriter.fi to the udf_update_tag() and because that has only struct fileIdentDesc included in it and not the impUse or name fields, the checksumming function is going to checksum random stack contents beyond the end of the structure. This is actually harmless because the following udf_fiiter_write_fi() will recompute the checksum from on-disk buffers where everything is properly included. So all that is needed is just removing the bogus calculation. |
| CVE-2024-43844 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: wow: fix GTK offload H2C skbuff issue We mistakenly put skb too large and that may exceed skb->end. Therefore, we fix it. skbuff: skb_over_panic: text:ffffffffc09e9a9d len:416 put:204 head:ffff8fba04eca780 data:ffff8fba04eca7e0 tail:0x200 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:192! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 4747 Comm: kworker/u4:44 Tainted: G O 6.6.30-02659-gc18865c4dfbd #1 86547039b47e46935493f615ee31d0b2d711d35e Hardware name: HP Meep/Meep, BIOS Google_Meep.11297.262.0 03/18/2021 Workqueue: events_unbound async_run_entry_fn RIP: 0010:skb_panic+0x5d/0x60 Code: c6 63 8b 8f bb 4c 0f 45 f6 48 c7 c7 4d 89 8b bb 48 89 ce 44 89 d1 41 56 53 41 53 ff b0 c8 00 00 00 e8 27 5f 23 00 48 83 c4 20 <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 RSP: 0018:ffffaa700144bad0 EFLAGS: 00010282 RAX: 0000000000000089 RBX: 0000000000000140 RCX: 14432c5aad26c900 RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: 0000000000000001 RBP: ffffaa700144bae0 R08: 0000000000000000 R09: ffffaa700144b920 R10: 00000000ffffdfff R11: ffffffffbc28fbc0 R12: ffff8fba4e57a010 R13: 0000000000000000 R14: ffffffffbb8f8b63 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8fba7bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007999c4ad1000 CR3: 000000015503a000 CR4: 0000000000350ee0 Call Trace: <TASK> ? __die_body+0x1f/0x70 ? die+0x3d/0x60 ? do_trap+0xa4/0x110 ? skb_panic+0x5d/0x60 ? do_error_trap+0x6d/0x90 ? skb_panic+0x5d/0x60 ? handle_invalid_op+0x30/0x40 ? skb_panic+0x5d/0x60 ? exc_invalid_op+0x3c/0x50 ? asm_exc_invalid_op+0x16/0x20 ? skb_panic+0x5d/0x60 skb_put+0x49/0x50 rtw89_fw_h2c_wow_gtk_ofld+0xbd/0x220 [rtw89_core 778b32de31cd1f14df2d6721ae99ba8a83636fa5] rtw89_wow_resume+0x31f/0x540 [rtw89_core 778b32de31cd1f14df2d6721ae99ba8a83636fa5] rtw89_ops_resume+0x2b/0xa0 [rtw89_core 778b32de31cd1f14df2d6721ae99ba8a83636fa5] ieee80211_reconfig+0x84/0x13e0 [mac80211 818a894e3b77da6298269c59ed7cdff065a4ed52] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d] ? dev_printk_emit+0x51/0x70 ? _dev_info+0x6e/0x90 ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d] wiphy_resume+0x89/0x180 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d] dpm_run_callback+0x3c/0x140 device_resume+0x1f9/0x3c0 ? __pfx_dpm_watchdog_handler+0x10/0x10 async_resume+0x1d/0x30 async_run_entry_fn+0x29/0xd0 process_scheduled_works+0x1d8/0x3d0 worker_thread+0x1fc/0x2f0 kthread+0xed/0x110 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x38/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Modules linked in: ccm 8021q r8153_ecm cdc_ether usbnet r8152 mii dm_integrity async_xor xor async_tx lz4 lz4_compress zstd zstd_compress zram zsmalloc uinput rfcomm cmac algif_hash rtw89_8922ae(O) algif_skcipher rtw89_8922a(O) af_alg rtw89_pci(O) rtw89_core(O) btusb(O) snd_soc_sst_bxt_da7219_max98357a btbcm(O) snd_soc_hdac_hdmi btintel(O) snd_soc_intel_hda_dsp_common snd_sof_probes btrtl(O) btmtk(O) snd_hda_codec_hdmi snd_soc_dmic uvcvideo videobuf2_vmalloc uvc videobuf2_memops videobuf2_v4l2 videobuf2_common snd_sof_pci_intel_apl snd_sof_intel_hda_common snd_soc_hdac_hda snd_sof_intel_hda soundwire_intel soundwire_generic_allocation snd_sof_intel_hda_mlink soundwire_cadence snd_sof_pci snd_sof_xtensa_dsp mac80211 snd_soc_acpi_intel_match snd_soc_acpi snd_sof snd_sof_utils soundwire_bus snd_soc_max98357a snd_soc_avs snd_soc_hda_codec snd_hda_ext_core snd_intel_dspcfg snd_intel_sdw_acpi snd_soc_da7219 snd_hda_codec snd_hwdep snd_hda_core veth ip6table_nat xt_MASQUERADE xt_cgroup fuse bluetooth ecdh_generic cfg80211 ecc gsmi: Log Shutdown ---truncated--- |
| CVE-2024-43843 | In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix out-of-bounds issue when preparing trampoline image We get the size of the trampoline image during the dry run phase and allocate memory based on that size. The allocated image will then be populated with instructions during the real patch phase. But after commit 26ef208c209a ("bpf: Use arch_bpf_trampoline_size"), the `im` argument is inconsistent in the dry run and real patch phase. This may cause emit_imm in RV64 to generate a different number of instructions when generating the 'im' address, potentially causing out-of-bounds issues. Let's emit the maximum number of instructions for the "im" address during dry run to fix this problem. |
| CVE-2024-43842 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: Fix array index mistake in rtw89_sta_info_get_iter() In rtw89_sta_info_get_iter() 'status->he_gi' is compared to array size. But then 'rate->he_gi' is used as array index instead of 'status->he_gi'. This can lead to go beyond array boundaries in case of 'rate->he_gi' is not equal to 'status->he_gi' and is bigger than array size. Looks like "copy-paste" mistake. Fix this mistake by replacing 'rate->he_gi' with 'status->he_gi'. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-43841 | In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: avoid reporting connection success with wrong SSID When user issues a connection with a different SSID than the one virt_wifi has advertised, the __cfg80211_connect_result() will trigger the warning: WARN_ON(bss_not_found). The issue is because the connection code in virt_wifi does not check the SSID from user space (it only checks the BSSID), and virt_wifi will call cfg80211_connect_result() with WLAN_STATUS_SUCCESS even if the SSID is different from the one virt_wifi has advertised. Eventually cfg80211 won't be able to find the cfg80211_bss and generate the warning. Fixed it by checking the SSID (from user space) in the connection code. |
| CVE-2024-43840 | In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG When BPF_TRAMP_F_CALL_ORIG is set, the trampoline calls __bpf_tramp_enter() and __bpf_tramp_exit() functions, passing them the struct bpf_tramp_image *im pointer as an argument in R0. The trampoline generation code uses emit_addr_mov_i64() to emit instructions for moving the bpf_tramp_image address into R0, but emit_addr_mov_i64() assumes the address to be in the vmalloc() space and uses only 48 bits. Because bpf_tramp_image is allocated using kzalloc(), its address can use more than 48-bits, in this case the trampoline will pass an invalid address to __bpf_tramp_enter/exit() causing a kernel crash. Fix this by using emit_a64_mov_i64() in place of emit_addr_mov_i64() as it can work with addresses that are greater than 48-bits. |
| CVE-2024-43839 | In the Linux kernel, the following vulnerability has been resolved: bna: adjust 'name' buf size of bna_tcb and bna_ccb structures To have enough space to write all possible sprintf() args. Currently 'name' size is 16, but the first '%s' specifier may already need at least 16 characters, since 'bnad->netdev->name' is used there. For '%d' specifiers, assume that they require: * 1 char for 'tx_id + tx_info->tcb[i]->id' sum, BNAD_MAX_TXQ_PER_TX is 8 * 2 chars for 'rx_id + rx_info->rx_ctrl[i].ccb->id', BNAD_MAX_RXP_PER_RX is 16 And replace sprintf with snprintf. Detected using the static analysis tool - Svace. |
| CVE-2024-43838 | In the Linux kernel, the following vulnerability has been resolved: bpf: fix overflow check in adjust_jmp_off() adjust_jmp_off() incorrectly used the insn->imm field for all overflow check, which is incorrect as that should only be done or the BPF_JMP32 | BPF_JA case, not the general jump instruction case. Fix it by using insn->off for overflow check in the general case. |
| CVE-2024-43837 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT When loading a EXT program without specifying `attr->attach_prog_fd`, the `prog->aux->dst_prog` will be null. At this time, calling resolve_prog_type() anywhere will result in a null pointer dereference. Example stack trace: [ 8.107863] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 8.108262] Mem abort info: [ 8.108384] ESR = 0x0000000096000004 [ 8.108547] EC = 0x25: DABT (current EL), IL = 32 bits [ 8.108722] SET = 0, FnV = 0 [ 8.108827] EA = 0, S1PTW = 0 [ 8.108939] FSC = 0x04: level 0 translation fault [ 8.109102] Data abort info: [ 8.109203] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 8.109399] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 8.109614] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 8.109836] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101354000 [ 8.110011] [0000000000000004] pgd=0000000000000000, p4d=0000000000000000 [ 8.112624] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 8.112783] Modules linked in: [ 8.113120] CPU: 0 PID: 99 Comm: may_access_dire Not tainted 6.10.0-rc3-next-20240613-dirty #1 [ 8.113230] Hardware name: linux,dummy-virt (DT) [ 8.113390] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.113429] pc : may_access_direct_pkt_data+0x24/0xa0 [ 8.113746] lr : add_subprog_and_kfunc+0x634/0x8e8 [ 8.113798] sp : ffff80008283b9f0 [ 8.113813] x29: ffff80008283b9f0 x28: ffff800082795048 x27: 0000000000000001 [ 8.113881] x26: ffff0000c0bb2600 x25: 0000000000000000 x24: 0000000000000000 [ 8.113897] x23: ffff0000c1134000 x22: 000000000001864f x21: ffff0000c1138000 [ 8.113912] x20: 0000000000000001 x19: ffff0000c12b8000 x18: ffffffffffffffff [ 8.113929] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 8.113944] x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 [ 8.113958] x11: 0720072007200720 x10: 0000000000f9fca4 x9 : ffff80008021f4e4 [ 8.113991] x8 : 0101010101010101 x7 : 746f72705f6d656d x6 : 000000001e0e0f5f [ 8.114006] x5 : 000000000001864f x4 : ffff0000c12b8000 x3 : 000000000000001c [ 8.114020] x2 : 0000000000000002 x1 : 0000000000000000 x0 : 0000000000000000 [ 8.114126] Call trace: [ 8.114159] may_access_direct_pkt_data+0x24/0xa0 [ 8.114202] bpf_check+0x3bc/0x28c0 [ 8.114214] bpf_prog_load+0x658/0xa58 [ 8.114227] __sys_bpf+0xc50/0x2250 [ 8.114240] __arm64_sys_bpf+0x28/0x40 [ 8.114254] invoke_syscall.constprop.0+0x54/0xf0 [ 8.114273] do_el0_svc+0x4c/0xd8 [ 8.114289] el0_svc+0x3c/0x140 [ 8.114305] el0t_64_sync_handler+0x134/0x150 [ 8.114331] el0t_64_sync+0x168/0x170 [ 8.114477] Code: 7100707f 54000081 f9401c00 f9403800 (b9400403) [ 8.118672] ---[ end trace 0000000000000000 ]--- One way to fix it is by forcing `attach_prog_fd` non-empty when bpf_prog_load(). But this will lead to `libbpf_probe_bpf_prog_type` API broken which use verifier log to probe prog type and will log nothing if we reject invalid EXT prog before bpf_check(). Another way is by adding null check in resolve_prog_type(). The issue was introduced by commit 4a9c7bbe2ed4 ("bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT") which wanted to correct type resolution for BPF_PROG_TYPE_TRACING programs. Before that, the type resolution of BPF_PROG_TYPE_EXT prog actually follows the logic below: prog->aux->dst_prog ? prog->aux->dst_prog->type : prog->type; It implies that when EXT program is not yet attached to `dst_prog`, the prog type should be EXT itself. This code worked fine in the past. So just keep using it. Fix this by returning `prog->type` for BPF_PROG_TYPE_EXT if `dst_prog` is not present in resolve_prog_type(). |
| CVE-2024-43836 | In the Linux kernel, the following vulnerability has been resolved: net: ethtool: pse-pd: Fix possible null-deref Fix a possible null dereference when a PSE supports both c33 and PoDL, but only one of the netlink attributes is specified. The c33 or PoDL PSE capabilities are already validated in the ethnl_set_pse_validate() call. |
| CVE-2024-43835 | In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix napi_skb_cache_put warning After the commit bdacf3e34945 ("net: Use nested-BH locking for napi_alloc_cache.") was merged, the following warning began to appear: WARNING: CPU: 5 PID: 1 at net/core/skbuff.c:1451 napi_skb_cache_put+0x82/0x4b0 __warn+0x12f/0x340 napi_skb_cache_put+0x82/0x4b0 napi_skb_cache_put+0x82/0x4b0 report_bug+0x165/0x370 handle_bug+0x3d/0x80 exc_invalid_op+0x1a/0x50 asm_exc_invalid_op+0x1a/0x20 __free_old_xmit+0x1c8/0x510 napi_skb_cache_put+0x82/0x4b0 __free_old_xmit+0x1c8/0x510 __free_old_xmit+0x1c8/0x510 __pfx___free_old_xmit+0x10/0x10 The issue arises because virtio is assuming it's running in NAPI context even when it's not, such as in the netpoll case. To resolve this, modify virtnet_poll_tx() to only set NAPI when budget is available. Same for virtnet_poll_cleantx(), which always assumed that it was in a NAPI context. |
| CVE-2024-43834 | In the Linux kernel, the following vulnerability has been resolved: xdp: fix invalid wait context of page_pool_destroy() If the driver uses a page pool, it creates a page pool with page_pool_create(). The reference count of page pool is 1 as default. A page pool will be destroyed only when a reference count reaches 0. page_pool_destroy() is used to destroy page pool, it decreases a reference count. When a page pool is destroyed, ->disconnect() is called, which is mem_allocator_disconnect(). This function internally acquires mutex_lock(). If the driver uses XDP, it registers a memory model with xdp_rxq_info_reg_mem_model(). The xdp_rxq_info_reg_mem_model() internally increases a page pool reference count if a memory model is a page pool. Now the reference count is 2. To destroy a page pool, the driver should call both page_pool_destroy() and xdp_unreg_mem_model(). The xdp_unreg_mem_model() internally calls page_pool_destroy(). Only page_pool_destroy() decreases a reference count. If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we will face an invalid wait context warning. Because xdp_unreg_mem_model() calls page_pool_destroy() with rcu_read_lock(). The page_pool_destroy() internally acquires mutex_lock(). Splat looks like: ============================= [ BUG: Invalid wait context ] 6.10.0-rc6+ #4 Tainted: G W ----------------------------- ethtool/1806 is trying to lock: ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150 other info that might help us debug this: context-{5:5} 3 locks held by ethtool/1806: stack backtrace: CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 Call Trace: <TASK> dump_stack_lvl+0x7e/0xc0 __lock_acquire+0x1681/0x4de0 ? _printk+0x64/0xe0 ? __pfx_mark_lock.part.0+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 lock_acquire+0x1b3/0x580 ? mem_allocator_disconnect+0x73/0x150 ? __wake_up_klogd.part.0+0x16/0xc0 ? __pfx_lock_acquire+0x10/0x10 ? dump_stack_lvl+0x91/0xc0 __mutex_lock+0x15c/0x1690 ? mem_allocator_disconnect+0x73/0x150 ? __pfx_prb_read_valid+0x10/0x10 ? mem_allocator_disconnect+0x73/0x150 ? __pfx_llist_add_batch+0x10/0x10 ? console_unlock+0x193/0x1b0 ? lockdep_hardirqs_on+0xbe/0x140 ? __pfx___mutex_lock+0x10/0x10 ? tick_nohz_tick_stopped+0x16/0x90 ? __irq_work_queue_local+0x1e5/0x330 ? irq_work_queue+0x39/0x50 ? __wake_up_klogd.part.0+0x79/0xc0 ? mem_allocator_disconnect+0x73/0x150 mem_allocator_disconnect+0x73/0x150 ? __pfx_mem_allocator_disconnect+0x10/0x10 ? mark_held_locks+0xa5/0xf0 ? rcu_is_watching+0x11/0xb0 page_pool_release+0x36e/0x6d0 page_pool_destroy+0xd7/0x440 xdp_unreg_mem_model+0x1a7/0x2a0 ? __pfx_xdp_unreg_mem_model+0x10/0x10 ? kfree+0x125/0x370 ? bnxt_free_ring.isra.0+0x2eb/0x500 ? bnxt_free_mem+0x5ac/0x2500 xdp_rxq_info_unreg+0x4a/0xd0 bnxt_free_mem+0x1356/0x2500 bnxt_close_nic+0xf0/0x3b0 ? __pfx_bnxt_close_nic+0x10/0x10 ? ethnl_parse_bit+0x2c6/0x6d0 ? __pfx___nla_validate_parse+0x10/0x10 ? __pfx_ethnl_parse_bit+0x10/0x10 bnxt_set_features+0x2a8/0x3e0 __netdev_update_features+0x4dc/0x1370 ? ethnl_parse_bitset+0x4ff/0x750 ? __pfx_ethnl_parse_bitset+0x10/0x10 ? __pfx___netdev_update_features+0x10/0x10 ? mark_held_locks+0xa5/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x70 ? __pm_runtime_resume+0x7d/0x110 ethnl_set_features+0x32d/0xa20 To fix this problem, it uses rhashtable_lookup_fast() instead of rhashtable_lookup() with rcu_read_lock(). Using xa without rcu_read_lock() here is safe. xa is freed by __xdp_mem_allocator_rcu_free() and this is called by call_rcu() of mem_xa_remove(). The mem_xa_remove() is called by page_pool_destroy() if a reference count reaches 0. The xa is already protected by the reference count mechanism well in the control plane. So removing rcu_read_lock() for page_pool_destroy() is safe. |
| CVE-2024-43833 | In the Linux kernel, the following vulnerability has been resolved: media: v4l: async: Fix NULL pointer dereference in adding ancillary links In v4l2_async_create_ancillary_links(), ancillary links are created for lens and flash sub-devices. These are sub-device to sub-device links and if the async notifier is related to a V4L2 device, the source sub-device of the ancillary link is NULL, leading to a NULL pointer dereference. Check the notifier's sd field is non-NULL in v4l2_async_create_ancillary_links(). [Sakari Ailus: Reword the subject and commit messages slightly.] |
| CVE-2024-43832 | In the Linux kernel, the following vulnerability has been resolved: s390/uv: Don't call folio_wait_writeback() without a folio reference folio_wait_writeback() requires that no spinlocks are held and that a folio reference is held, as documented. After we dropped the PTL, the folio could get freed concurrently. So grab a temporary reference. |
| CVE-2024-43831 | In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Handle invalid decoder vsi Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi is valid for future use. |
| CVE-2024-43830 | In the Linux kernel, the following vulnerability has been resolved: leds: trigger: Unregister sysfs attributes before calling deactivate() Triggers which have trigger specific sysfs attributes typically store related data in trigger-data allocated by the activate() callback and freed by the deactivate() callback. Calling device_remove_groups() after calling deactivate() leaves a window where the sysfs attributes show/store functions could be called after deactivation and then operate on the just freed trigger-data. Move the device_remove_groups() call to before deactivate() to close this race window. This also makes the deactivation path properly do things in reverse order of the activation path which calls the activate() callback before calling device_add_groups(). |
| CVE-2024-43829 | In the Linux kernel, the following vulnerability has been resolved: drm/qxl: Add check for drm_cvt_mode Add check for the return value of drm_cvt_mode() and return the error if it fails in order to avoid NULL pointer dereference. |
| CVE-2024-43828 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix infinite loop when replaying fast_commit When doing fast_commit replay an infinite loop may occur due to an uninitialized extent_status struct. ext4_ext_determine_insert_hole() does not detect the replay and calls ext4_es_find_extent_range(), which will return immediately without initializing the 'es' variable. Because 'es' contains garbage, an integer overflow may happen causing an infinite loop in this function, easily reproducible using fstest generic/039. This commit fixes this issue by unconditionally initializing the structure in function ext4_es_find_extent_range(). Thanks to Zhang Yi, for figuring out the real problem! |
| CVE-2024-43827 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check before access structs In enable_phantom_plane, we should better check null pointer before accessing various structs. |
| CVE-2024-43826 | In the Linux kernel, the following vulnerability has been resolved: nfs: pass explicit offset/count to trace events nfs_folio_length is unsafe to use without having the folio locked and a check for a NULL ->f_mapping that protects against truncations and can lead to kernel crashes. E.g. when running xfstests generic/065 with all nfs trace points enabled. Follow the model of the XFS trace points and pass in an explіcit offset and length. This has the additional benefit that these values can be more accurate as some of the users touch partial folio ranges. |
| CVE-2024-43825 | In the Linux kernel, the following vulnerability has been resolved: iio: Fix the sorting functionality in iio_gts_build_avail_time_table The sorting in iio_gts_build_avail_time_table is not working as intended. It could result in an out-of-bounds access when the time is zero. Here are more details: 1. When the gts->itime_table[i].time_us is zero, e.g., the time sequence is `3, 0, 1`, the inner for-loop will not terminate and do out-of-bound writes. This is because once `times[j] > new`, the value `new` will be added in the current position and the `times[j]` will be moved to `j+1` position, which makes the if-condition always hold. Meanwhile, idx will be added one, making the loop keep running without termination and out-of-bound write. 2. If none of the gts->itime_table[i].time_us is zero, the elements will just be copied without being sorted as described in the comment "Sort times from all tables to one and remove duplicates". For more details, please refer to https://lore.kernel.org/all/[email protected]. |
| CVE-2024-43824 | In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-test: Make use of cached 'epc_features' in pci_epf_test_core_init() Instead of getting the epc_features from pci_epc_get_features() API, use the cached pci_epf_test::epc_features value to avoid the NULL check. Since the NULL check is already performed in pci_epf_test_bind(), having one more check in pci_epf_test_core_init() is redundant and it is not possible to hit the NULL pointer dereference. Also with commit a01e7214bef9 ("PCI: endpoint: Remove "core_init_notifier" flag"), 'epc_features' got dereferenced without the NULL check, leading to the following false positive Smatch warning: drivers/pci/endpoint/functions/pci-epf-test.c:784 pci_epf_test_core_init() error: we previously assumed 'epc_features' could be null (see line 747) Thus, remove the redundant NULL check and also use the epc_features:: {msix_capable/msi_capable} flags directly to avoid local variables. [kwilczynski: commit log] |
| CVE-2024-43823 | In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Fix NULL pointer dereference in case of DT error in ks_pcie_setup_rc_app_regs() If IORESOURCE_MEM is not provided in Device Tree due to any error, resource_list_first_type() will return NULL and pci_parse_request_of_pci_ranges() will just emit a warning. This will cause a NULL pointer dereference. Fix this bug by adding NULL return check. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-43822 | In the Linux kernel, the following vulnerability has been resolved: ASoc: PCM6240: Return directly after a failed devm_kzalloc() in pcmdevice_i2c_probe() The value “-ENOMEM” was assigned to the local variable “ret” in one if branch after a devm_kzalloc() call failed at the beginning. This error code will trigger then a pcmdevice_remove() call with a passed null pointer so that an undesirable dereference will be performed. Thus return the appropriate error code directly. |
| CVE-2024-43821 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix a possible null pointer dereference In function lpfc_xcvr_data_show, the memory allocation with kmalloc might fail, thereby making rdp_context a null pointer. In the following context and functions that use this pointer, there are dereferencing operations, leading to null pointer dereference. To fix this issue, a null pointer check should be added. If it is null, use scnprintf to notify the user and return len. |
| CVE-2024-43820 | In the Linux kernel, the following vulnerability has been resolved: dm-raid: Fix WARN_ON_ONCE check for sync_thread in raid_resume rm-raid devices will occasionally trigger the following warning when being resumed after a table load because DM_RECOVERY_RUNNING is set: WARNING: CPU: 7 PID: 5660 at drivers/md/dm-raid.c:4105 raid_resume+0xee/0x100 [dm_raid] The failing check is: WARN_ON_ONCE(test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)); This check is designed to make sure that the sync thread isn't registered, but md_check_recovery can set MD_RECOVERY_RUNNING without the sync_thread ever getting registered. Instead of checking if MD_RECOVERY_RUNNING is set, check if sync_thread is non-NULL. |
| CVE-2024-43819 | In the Linux kernel, the following vulnerability has been resolved: kvm: s390: Reject memory region operations for ucontrol VMs This change rejects the KVM_SET_USER_MEMORY_REGION and KVM_SET_USER_MEMORY_REGION2 ioctls when called on a ucontrol VM. This is necessary since ucontrol VMs have kvm->arch.gmap set to 0 and would thus result in a null pointer dereference further in. Memory management needs to be performed in userspace and using the ioctls KVM_S390_UCAS_MAP and KVM_S390_UCAS_UNMAP. Also improve s390 specific documentation for KVM_SET_USER_MEMORY_REGION and KVM_SET_USER_MEMORY_REGION2. [[email protected]: commit message spelling fix, subject prefix fix] |
| CVE-2024-43818 | In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: Adjust error handling in case of absent codec device acpi_get_first_physical_node() can return NULL in several cases (no such device, ACPI table error, reference count drop to 0, etc). Existing check just emit error message, but doesn't perform return. Then this NULL pointer is passed to devm_acpi_dev_add_driver_gpios() where it is dereferenced. Adjust this error handling by adding error code return. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-43817 | In the Linux kernel, the following vulnerability has been resolved: net: missing check virtio Two missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again 1. After the skb_segment function the buffer may become non-linear (nr_frags != 0), but since the SKBTX_SHARED_FRAG flag is not set anywhere the __skb_linearize function will not be executed, then the buffer will remain non-linear. Then the condition (offset >= skb_headlen(skb)) becomes true, which causes WARN_ON_ONCE in skb_checksum_help. 2. The struct sk_buff and struct virtio_net_hdr members must be mathematically related. (gso_size) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) may be 0 if division is without remainder. offset+2 (4191) > skb_headlen() (1116) WARNING: CPU: 1 PID: 5084 at net/core/dev.c:3303 skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Modules linked in: CPU: 1 PID: 5084 Comm: syz-executor336 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Code: 89 e8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 52 01 00 00 44 89 e2 2b 53 74 4c 89 ee 48 c7 c7 40 57 e9 8b e8 af 8f dd f8 90 <0f> 0b 90 90 e9 87 fe ff ff e8 40 0f 6e f9 e9 4b fa ff ff 48 89 ef RSP: 0018:ffffc90003a9f338 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888025125780 RCX: ffffffff814db209 RDX: ffff888015393b80 RSI: ffffffff814db216 RDI: 0000000000000001 RBP: ffff8880251257f4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000045c R13: 000000000000105f R14: ffff8880251257f0 R15: 000000000000105d FS: 0000555555c24380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000f000 CR3: 0000000023151000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip_do_fragment+0xa1b/0x18b0 net/ipv4/ip_output.c:777 ip_fragment.constprop.0+0x161/0x230 net/ipv4/ip_output.c:584 ip_finish_output_gso net/ipv4/ip_output.c:286 [inline] __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x49c/0x650 net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x13b/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:129 iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ipip6_tunnel_xmit net/ipv6/sit.c:1034 [inline] sit_tunnel_xmit+0xed2/0x28f0 net/ipv6/sit.c:1076 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3545 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3561 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4346 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24ca/0x5240 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Found by Linux Verification Center (linuxtesting.org) with Syzkaller |
| CVE-2024-43816 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Revise lpfc_prep_embed_io routine with proper endian macro usages On big endian architectures, it is possible to run into a memory out of bounds pointer dereference when FCP targets are zoned. In lpfc_prep_embed_io, the memcpy(ptr, fcp_cmnd, sgl->sge_len) is referencing a little endian formatted sgl->sge_len value. So, the memcpy can cause big endian systems to crash. Redefine the *sgl ptr as a struct sli4_sge_le to make it clear that we are referring to a little endian formatted data structure. And, update the routine with proper le32_to_cpu macro usages. |
| CVE-2024-43815 | In the Linux kernel, the following vulnerability has been resolved: crypto: mxs-dcp - Ensure payload is zero when using key slot We could leak stack memory through the payload field when running AES with a key from one of the hardware's key slots. Fix this by ensuring the payload field is set to 0 in such cases. This does not affect the common use case when the key is supplied from main memory via the descriptor payload. |
| CVE-2024-42322 | In the Linux kernel, the following vulnerability has been resolved: ipvs: properly dereference pe in ip_vs_add_service Use pe directly to resolve sparse warning: net/netfilter/ipvs/ip_vs_ctl.c:1471:27: warning: dereference of noderef expression |
| CVE-2024-42321 | In the Linux kernel, the following vulnerability has been resolved: net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE The following splat is easy to reproduce upstream as well as in -stable kernels. Florian Westphal provided the following commit: d1dab4f71d37 ("net: add and use __skb_get_hash_symmetric_net") but this complementary fix has been also suggested by Willem de Bruijn and it can be easily backported to -stable kernel which consists in using DEBUG_NET_WARN_ON_ONCE instead to silence the following splat given __skb_get_hash() is used by the nftables tracing infrastructure to to identify packets in traces. [69133.561393] ------------[ cut here ]------------ [69133.561404] WARNING: CPU: 0 PID: 43576 at net/core/flow_dissector.c:1104 __skb_flow_dissect+0x134f/ [...] [69133.561944] CPU: 0 PID: 43576 Comm: socat Not tainted 6.10.0-rc7+ #379 [69133.561959] RIP: 0010:__skb_flow_dissect+0x134f/0x2ad0 [69133.561970] Code: 83 f9 04 0f 84 b3 00 00 00 45 85 c9 0f 84 aa 00 00 00 41 83 f9 02 0f 84 81 fc ff ff 44 0f b7 b4 24 80 00 00 00 e9 8b f9 ff ff <0f> 0b e9 20 f3 ff ff 41 f6 c6 20 0f 84 e4 ef ff ff 48 8d 7b 12 e8 [69133.561979] RSP: 0018:ffffc90000006fc0 EFLAGS: 00010246 [69133.561988] RAX: 0000000000000000 RBX: ffffffff82f33e20 RCX: ffffffff81ab7e19 [69133.561994] RDX: dffffc0000000000 RSI: ffffc90000007388 RDI: ffff888103a1b418 [69133.562001] RBP: ffffc90000007310 R08: 0000000000000000 R09: 0000000000000000 [69133.562007] R10: ffffc90000007388 R11: ffffffff810cface R12: ffff888103a1b400 [69133.562013] R13: 0000000000000000 R14: ffffffff82f33e2a R15: ffffffff82f33e28 [69133.562020] FS: 00007f40f7131740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [69133.562027] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [69133.562033] CR2: 00007f40f7346ee0 CR3: 000000015d200001 CR4: 00000000001706f0 [69133.562040] Call Trace: [69133.562044] <IRQ> [69133.562049] ? __warn+0x9f/0x1a0 [ 1211.841384] ? __skb_flow_dissect+0x107e/0x2860 [...] [ 1211.841496] ? bpf_flow_dissect+0x160/0x160 [ 1211.841753] __skb_get_hash+0x97/0x280 [ 1211.841765] ? __skb_get_hash_symmetric+0x230/0x230 [ 1211.841776] ? mod_find+0xbf/0xe0 [ 1211.841786] ? get_stack_info_noinstr+0x12/0xe0 [ 1211.841798] ? bpf_ksym_find+0x56/0xe0 [ 1211.841807] ? __rcu_read_unlock+0x2a/0x70 [ 1211.841819] nft_trace_init+0x1b9/0x1c0 [nf_tables] [ 1211.841895] ? nft_trace_notify+0x830/0x830 [nf_tables] [ 1211.841964] ? get_stack_info+0x2b/0x80 [ 1211.841975] ? nft_do_chain_arp+0x80/0x80 [nf_tables] [ 1211.842044] nft_do_chain+0x79c/0x850 [nf_tables] |
| CVE-2024-42320 | In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix error checks in dasd_copy_pair_store() dasd_add_busid() can return an error via ERR_PTR() if an allocation fails. However, two callsites in dasd_copy_pair_store() do not check the result, potentially resulting in a NULL pointer dereference. Fix this by checking the result with IS_ERR() and returning the error up the stack. |
| CVE-2024-42319 | In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-cmdq: Move devm_mbox_controller_register() after devm_pm_runtime_enable() When mtk-cmdq unbinds, a WARN_ON message with condition pm_runtime_get_sync() < 0 occurs. According to the call tracei below: cmdq_mbox_shutdown mbox_free_channel mbox_controller_unregister __devm_mbox_controller_unregister ... The root cause can be deduced to be calling pm_runtime_get_sync() after calling pm_runtime_disable() as observed below: 1. CMDQ driver uses devm_mbox_controller_register() in cmdq_probe() to bind the cmdq device to the mbox_controller, so devm_mbox_controller_unregister() will automatically unregister the device bound to the mailbox controller when the device-managed resource is removed. That means devm_mbox_controller_unregister() and cmdq_mbox_shoutdown() will be called after cmdq_remove(). 2. CMDQ driver also uses devm_pm_runtime_enable() in cmdq_probe() after devm_mbox_controller_register(), so that devm_pm_runtime_disable() will be called after cmdq_remove(), but before devm_mbox_controller_unregister(). To fix this problem, cmdq_probe() needs to move devm_mbox_controller_register() after devm_pm_runtime_enable() to make devm_pm_runtime_disable() be called after devm_mbox_controller_unregister(). |
| CVE-2024-42318 | In the Linux kernel, the following vulnerability has been resolved: landlock: Don't lose track of restrictions on cred_transfer When a process' cred struct is replaced, this _almost_ always invokes the cred_prepare LSM hook; but in one special case (when KEYCTL_SESSION_TO_PARENT updates the parent's credentials), the cred_transfer LSM hook is used instead. Landlock only implements the cred_prepare hook, not cred_transfer, so KEYCTL_SESSION_TO_PARENT causes all information on Landlock restrictions to be lost. This basically means that a process with the ability to use the fork() and keyctl() syscalls can get rid of all Landlock restrictions on itself. Fix it by adding a cred_transfer hook that does the same thing as the existing cred_prepare hook. (Implemented by having hook_cred_prepare() call hook_cred_transfer() so that the two functions are less likely to accidentally diverge in the future.) |
| CVE-2024-42317 | In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: avoid PMD-size page cache if needed xarray can't support arbitrary page cache size. the largest and supported page cache size is defined as MAX_PAGECACHE_ORDER by commit 099d90642a71 ("mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray"). However, it's possible to have 512MB page cache in the huge memory's collapsing path on ARM64 system whose base page size is 64KB. 512MB page cache is breaking the limitation and a warning is raised when the xarray entry is split as shown in the following example. [root@dhcp-10-26-1-207 ~]# cat /proc/1/smaps | grep KernelPageSize KernelPageSize: 64 kB [root@dhcp-10-26-1-207 ~]# cat /tmp/test.c : int main(int argc, char **argv) { const char *filename = TEST_XFS_FILENAME; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret = 0; if (pgsize != 0x10000) { fprintf(stdout, "System with 64KB base page size is required!\n"); return -EPERM; } system("echo 0 > /sys/devices/virtual/bdi/253:0/read_ahead_kb"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open the xfs file */ fd = open(filename, O_RDONLY); assert(fd > 0); /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ, MAP_SHARED, fd, 0); assert(buf != (void *)-1); fprintf(stdout, "mapped buffer at 0x%p\n", buf); /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_NOHUGEPAGE); assert(ret == 0); ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_READ); assert(ret == 0); /* Collapse VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); assert(ret == 0); ret = madvise(buf, TEST_MEM_SIZE, MADV_COLLAPSE); if (ret) { fprintf(stdout, "Error %d to madvise(MADV_COLLAPSE)\n", errno); goto out; } /* Split xarray entry. Write permission is needed */ munmap(buf, TEST_MEM_SIZE); buf = (void *)-1; close(fd); fd = open(filename, O_RDWR); assert(fd > 0); fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); out: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return ret; } [root@dhcp-10-26-1-207 ~]# gcc /tmp/test.c -o /tmp/test [root@dhcp-10-26-1-207 ~]# /tmp/test ------------[ cut here ]------------ WARNING: CPU: 25 PID: 7560 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse \ xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 virtio_net \ sha1_ce net_failover virtio_blk virtio_console failover dimlib virtio_mmio CPU: 25 PID: 7560 Comm: test Kdump: loaded Not tainted 6.10.0-rc7-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x780 sp : ffff8000ac32f660 x29: ffff8000ac32f660 x28: ffff0000e0969eb0 x27: ffff8000ac32f6c0 x26: 0000000000000c40 x25: ffff0000e0969eb0 x24: 000000000000000d x23: ffff8000ac32f6c0 x22: ffffffdfc0700000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0700000 x18: 0000000000000000 x17: 0000000000000000 x16: ffffd5f3708ffc70 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: ffffffffffffffc0 x10: 0000000000000040 x9 : ffffd5f3708e692c x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff0000e0969eb8 x5 : ffffd5f37289e378 x4 : 0000000000000000 x3 : 0000000000000c40 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x780 truncate_inode_partial_folio+0xdc/0x160 truncate_inode_pages_range+0x1b4/0x4a8 truncate_pagecache_range+0x84/0xa ---truncated--- |
| CVE-2024-42316 | In the Linux kernel, the following vulnerability has been resolved: mm/mglru: fix div-by-zero in vmpressure_calc_level() evict_folios() uses a second pass to reclaim folios that have gone through page writeback and become clean before it finishes the first pass, since folio_rotate_reclaimable() cannot handle those folios due to the isolation. The second pass tries to avoid potential double counting by deducting scan_control->nr_scanned. However, this can result in underflow of nr_scanned, under a condition where shrink_folio_list() does not increment nr_scanned, i.e., when folio_trylock() fails. The underflow can cause the divisor, i.e., scale=scanned+reclaimed in vmpressure_calc_level(), to become zero, resulting in the following crash: [exception RIP: vmpressure_work_fn+101] process_one_work at ffffffffa3313f2b Since scan_control->nr_scanned has no established semantics, the potential double counting has minimal risks. Therefore, fix the problem by not deducting scan_control->nr_scanned in evict_folios(). |
| CVE-2024-42315 | In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential deadlock on __exfat_get_dentry_set When accessing a file with more entries than ES_MAX_ENTRY_NUM, the bh-array is allocated in __exfat_get_entry_set. The problem is that the bh-array is allocated with GFP_KERNEL. It does not make sense. In the following cases, a deadlock for sbi->s_lock between the two processes may occur. CPU0 CPU1 ---- ---- kswapd balance_pgdat lock(fs_reclaim) exfat_iterate lock(&sbi->s_lock) exfat_readdir exfat_get_uniname_from_ext_entry exfat_get_dentry_set __exfat_get_dentry_set kmalloc_array ... lock(fs_reclaim) ... evict exfat_evict_inode lock(&sbi->s_lock) To fix this, let's allocate bh-array with GFP_NOFS. |
| CVE-2024-42314 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix extent map use-after-free when adding pages to compressed bio At add_ra_bio_pages() we are accessing the extent map to calculate 'add_size' after we dropped our reference on the extent map, resulting in a use-after-free. Fix this by computing 'add_size' before dropping our extent map reference. |
| CVE-2024-42313 | In the Linux kernel, the following vulnerability has been resolved: media: venus: fix use after free in vdec_close There appears to be a possible use after free with vdec_close(). The firmware will add buffer release work to the work queue through HFI callbacks as a normal part of decoding. Randomly closing the decoder device from userspace during normal decoding can incur a read after free for inst. Fix it by cancelling the work in vdec_close. |
| CVE-2024-42312 | In the Linux kernel, the following vulnerability has been resolved: sysctl: always initialize i_uid/i_gid Always initialize i_uid/i_gid inside the sysfs core so set_ownership() can safely skip setting them. Commit 5ec27ec735ba ("fs/proc/proc_sysctl.c: fix the default values of i_uid/i_gid on /proc/sys inodes.") added defaults for i_uid/i_gid when set_ownership() was not implemented. It also missed adjusting net_ctl_set_ownership() to use the same default values in case the computation of a better value failed. |
| CVE-2024-42311 | In the Linux kernel, the following vulnerability has been resolved: hfs: fix to initialize fields of hfs_inode_info after hfs_alloc_inode() Syzbot reports uninitialized value access issue as below: loop0: detected capacity change from 0 to 64 ===================================================== BUG: KMSAN: uninit-value in hfs_revalidate_dentry+0x307/0x3f0 fs/hfs/sysdep.c:30 hfs_revalidate_dentry+0x307/0x3f0 fs/hfs/sysdep.c:30 d_revalidate fs/namei.c:862 [inline] lookup_fast+0x89e/0x8e0 fs/namei.c:1649 walk_component fs/namei.c:2001 [inline] link_path_walk+0x817/0x1480 fs/namei.c:2332 path_lookupat+0xd9/0x6f0 fs/namei.c:2485 filename_lookup+0x22e/0x740 fs/namei.c:2515 user_path_at_empty+0x8b/0x390 fs/namei.c:2924 user_path_at include/linux/namei.h:57 [inline] do_mount fs/namespace.c:3689 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x66b/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x140 fs/namespace.c:3875 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b BUG: KMSAN: uninit-value in hfs_ext_read_extent fs/hfs/extent.c:196 [inline] BUG: KMSAN: uninit-value in hfs_get_block+0x92d/0x1620 fs/hfs/extent.c:366 hfs_ext_read_extent fs/hfs/extent.c:196 [inline] hfs_get_block+0x92d/0x1620 fs/hfs/extent.c:366 block_read_full_folio+0x4ff/0x11b0 fs/buffer.c:2271 hfs_read_folio+0x55/0x60 fs/hfs/inode.c:39 filemap_read_folio+0x148/0x4f0 mm/filemap.c:2426 do_read_cache_folio+0x7c8/0xd90 mm/filemap.c:3553 do_read_cache_page mm/filemap.c:3595 [inline] read_cache_page+0xfb/0x2f0 mm/filemap.c:3604 read_mapping_page include/linux/pagemap.h:755 [inline] hfs_btree_open+0x928/0x1ae0 fs/hfs/btree.c:78 hfs_mdb_get+0x260c/0x3000 fs/hfs/mdb.c:204 hfs_fill_super+0x1fb1/0x2790 fs/hfs/super.c:406 mount_bdev+0x628/0x920 fs/super.c:1359 hfs_mount+0xcd/0xe0 fs/hfs/super.c:456 legacy_get_tree+0x167/0x2e0 fs/fs_context.c:610 vfs_get_tree+0xdc/0x5d0 fs/super.c:1489 do_new_mount+0x7a9/0x16f0 fs/namespace.c:3145 path_mount+0xf98/0x26a0 fs/namespace.c:3475 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x919/0x9e0 fs/namespace.c:3674 __ia32_sys_mount+0x15b/0x1b0 fs/namespace.c:3674 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: __alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] alloc_slab_page mm/slub.c:2190 [inline] allocate_slab mm/slub.c:2354 [inline] new_slab+0x2d7/0x1400 mm/slub.c:2407 ___slab_alloc+0x16b5/0x3970 mm/slub.c:3540 __slab_alloc mm/slub.c:3625 [inline] __slab_alloc_node mm/slub.c:3678 [inline] slab_alloc_node mm/slub.c:3850 [inline] kmem_cache_alloc_lru+0x64d/0xb30 mm/slub.c:3879 alloc_inode_sb include/linux/fs.h:3018 [inline] hfs_alloc_inode+0x5a/0xc0 fs/hfs/super.c:165 alloc_inode+0x83/0x440 fs/inode.c:260 new_inode_pseudo fs/inode.c:1005 [inline] new_inode+0x38/0x4f0 fs/inode.c:1031 hfs_new_inode+0x61/0x1010 fs/hfs/inode.c:186 hfs_mkdir+0x54/0x250 fs/hfs/dir.c:228 vfs_mkdir+0x49a/0x700 fs/namei.c:4126 do_mkdirat+0x529/0x810 fs/namei.c:4149 __do_sys_mkdirat fs/namei.c:4164 [inline] __se_sys_mkdirat fs/namei.c:4162 [inline] __x64_sys_mkdirat+0xc8/0x120 fs/namei.c:4162 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b It missed to initialize .tz_secondswest, .cached_start and .cached_blocks fields in struct hfs_inode_info after hfs_alloc_inode(), fix it. |
| CVE-2024-42310 | In the Linux kernel, the following vulnerability has been resolved: drm/gma500: fix null pointer dereference in cdv_intel_lvds_get_modes In cdv_intel_lvds_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. |
| CVE-2024-42309 | In the Linux kernel, the following vulnerability has been resolved: drm/gma500: fix null pointer dereference in psb_intel_lvds_get_modes In psb_intel_lvds_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. |
| CVE-2024-42307 | In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path Dan Carpenter reported a Smack static checker warning: fs/smb/client/cifsfs.c:1981 init_cifs() error: we previously assumed 'serverclose_wq' could be null (see line 1895) The patch which introduced the serverclose workqueue used the wrong oredering in error paths in init_cifs() for freeing it on errors. |
| CVE-2024-42306 | In the Linux kernel, the following vulnerability has been resolved: udf: Avoid using corrupted block bitmap buffer When the filesystem block bitmap is corrupted, we detect the corruption while loading the bitmap and fail the allocation with error. However the next allocation from the same bitmap will notice the bitmap buffer is already loaded and tries to allocate from the bitmap with mixed results (depending on the exact nature of the bitmap corruption). Fix the problem by using BH_verified bit to indicate whether the bitmap is valid or not. |
| CVE-2024-42305 | In the Linux kernel, the following vulnerability has been resolved: ext4: check dot and dotdot of dx_root before making dir indexed Syzbot reports a issue as follows: ============================================ BUG: unable to handle page fault for address: ffffed11022e24fe PGD 23ffee067 P4D 23ffee067 PUD 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 5079 Comm: syz-executor306 Not tainted 6.10.0-rc5-g55027e689933 #0 Call Trace: <TASK> make_indexed_dir+0xdaf/0x13c0 fs/ext4/namei.c:2341 ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2451 ext4_rename fs/ext4/namei.c:3936 [inline] ext4_rename2+0x26e5/0x4370 fs/ext4/namei.c:4214 [...] ============================================ The immediate cause of this problem is that there is only one valid dentry for the block to be split during do_split, so split==0 results in out of bounds accesses to the map triggering the issue. do_split unsigned split dx_make_map count = 1 split = count/2 = 0; continued = hash2 == map[split - 1].hash; ---> map[4294967295] The maximum length of a filename is 255 and the minimum block size is 1024, so it is always guaranteed that the number of entries is greater than or equal to 2 when do_split() is called. But syzbot's crafted image has no dot and dotdot in dir, and the dentry distribution in dirblock is as follows: bus dentry1 hole dentry2 free |xx--|xx-------------|...............|xx-------------|...............| 0 12 (8+248)=256 268 256 524 (8+256)=264 788 236 1024 So when renaming dentry1 increases its name_len length by 1, neither hole nor free is sufficient to hold the new dentry, and make_indexed_dir() is called. In make_indexed_dir() it is assumed that the first two entries of the dirblock must be dot and dotdot, so bus and dentry1 are left in dx_root because they are treated as dot and dotdot, and only dentry2 is moved to the new leaf block. That's why count is equal to 1. Therefore add the ext4_check_dx_root() helper function to add more sanity checks to dot and dotdot before starting the conversion to avoid the above issue. |
| CVE-2024-42304 | In the Linux kernel, the following vulnerability has been resolved: ext4: make sure the first directory block is not a hole The syzbot constructs a directory that has no dirblock but is non-inline, i.e. the first directory block is a hole. And no errors are reported when creating files in this directory in the following flow. ext4_mknod ... ext4_add_entry // Read block 0 ext4_read_dirblock(dir, block, DIRENT) bh = ext4_bread(NULL, inode, block, 0) if (!bh && (type == INDEX || type == DIRENT_HTREE)) // The first directory block is a hole // But type == DIRENT, so no error is reported. After that, we get a directory block without '.' and '..' but with a valid dentry. This may cause some code that relies on dot or dotdot (such as make_indexed_dir()) to crash. Therefore when ext4_read_dirblock() finds that the first directory block is a hole report that the filesystem is corrupted and return an error to avoid loading corrupted data from disk causing something bad. |
| CVE-2024-42303 | In the Linux kernel, the following vulnerability has been resolved: media: imx-pxp: Fix ERR_PTR dereference in pxp_probe() devm_regmap_init_mmio() can fail, add a check and bail out in case of error. |
| CVE-2024-42302 | In the Linux kernel, the following vulnerability has been resolved: PCI/DPC: Fix use-after-free on concurrent DPC and hot-removal Keith reports a use-after-free when a DPC event occurs concurrently to hot-removal of the same portion of the hierarchy: The dpc_handler() awaits readiness of the secondary bus below the Downstream Port where the DPC event occurred. To do so, it polls the config space of the first child device on the secondary bus. If that child device is concurrently removed, accesses to its struct pci_dev cause the kernel to oops. That's because pci_bridge_wait_for_secondary_bus() neglects to hold a reference on the child device. Before v6.3, the function was only called on resume from system sleep or on runtime resume. Holding a reference wasn't necessary back then because the pciehp IRQ thread could never run concurrently. (On resume from system sleep, IRQs are not enabled until after the resume_noirq phase. And runtime resume is always awaited before a PCI device is removed.) However starting with v6.3, pci_bridge_wait_for_secondary_bus() is also called on a DPC event. Commit 53b54ad074de ("PCI/DPC: Await readiness of secondary bus after reset"), which introduced that, failed to appreciate that pci_bridge_wait_for_secondary_bus() now needs to hold a reference on the child device because dpc_handler() and pciehp may indeed run concurrently. The commit was backported to v5.10+ stable kernels, so that's the oldest one affected. Add the missing reference acquisition. Abridged stack trace: BUG: unable to handle page fault for address: 00000000091400c0 CPU: 15 PID: 2464 Comm: irq/53-pcie-dpc 6.9.0 RIP: pci_bus_read_config_dword+0x17/0x50 pci_dev_wait() pci_bridge_wait_for_secondary_bus() dpc_reset_link() pcie_do_recovery() dpc_handler() |
| CVE-2024-42301 | In the Linux kernel, the following vulnerability has been resolved: dev/parport: fix the array out-of-bounds risk Fixed array out-of-bounds issues caused by sprintf by replacing it with snprintf for safer data copying, ensuring the destination buffer is not overflowed. Below is the stack trace I encountered during the actual issue: [ 66.575408s] [pid:5118,cpu4,QThread,4]Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: do_hardware_base_addr+0xcc/0xd0 [parport] [ 66.575408s] [pid:5118,cpu4,QThread,5]CPU: 4 PID: 5118 Comm: QThread Tainted: G S W O 5.10.97-arm64-desktop #7100.57021.2 [ 66.575439s] [pid:5118,cpu4,QThread,6]TGID: 5087 Comm: EFileApp [ 66.575439s] [pid:5118,cpu4,QThread,7]Hardware name: HUAWEI HUAWEI QingYun PGUX-W515x-B081/SP1PANGUXM, BIOS 1.00.07 04/29/2024 [ 66.575439s] [pid:5118,cpu4,QThread,8]Call trace: [ 66.575469s] [pid:5118,cpu4,QThread,9] dump_backtrace+0x0/0x1c0 [ 66.575469s] [pid:5118,cpu4,QThread,0] show_stack+0x14/0x20 [ 66.575469s] [pid:5118,cpu4,QThread,1] dump_stack+0xd4/0x10c [ 66.575500s] [pid:5118,cpu4,QThread,2] panic+0x1d8/0x3bc [ 66.575500s] [pid:5118,cpu4,QThread,3] __stack_chk_fail+0x2c/0x38 [ 66.575500s] [pid:5118,cpu4,QThread,4] do_hardware_base_addr+0xcc/0xd0 [parport] |
| CVE-2024-42300 | In the Linux kernel, the following vulnerability has been resolved: erofs: fix race in z_erofs_get_gbuf() In z_erofs_get_gbuf(), the current task may be migrated to another CPU between `z_erofs_gbuf_id()` and `spin_lock(&gbuf->lock)`. Therefore, z_erofs_put_gbuf() will trigger the following issue which was found by stress test: <2>[772156.434168] kernel BUG at fs/erofs/zutil.c:58! .. <4>[772156.435007] <4>[772156.439237] CPU: 0 PID: 3078 Comm: stress Kdump: loaded Tainted: G E 6.10.0-rc7+ #2 <4>[772156.439239] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 1.0.0 01/01/2017 <4>[772156.439241] pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) <4>[772156.439243] pc : z_erofs_put_gbuf+0x64/0x70 [erofs] <4>[772156.439252] lr : z_erofs_lz4_decompress+0x600/0x6a0 [erofs] .. <6>[772156.445958] stress (3127): drop_caches: 1 <4>[772156.446120] Call trace: <4>[772156.446121] z_erofs_put_gbuf+0x64/0x70 [erofs] <4>[772156.446761] z_erofs_lz4_decompress+0x600/0x6a0 [erofs] <4>[772156.446897] z_erofs_decompress_queue+0x740/0xa10 [erofs] <4>[772156.447036] z_erofs_runqueue+0x428/0x8c0 [erofs] <4>[772156.447160] z_erofs_readahead+0x224/0x390 [erofs] .. |
| CVE-2024-42299 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Update log->page_{mask,bits} if log->page_size changed If an NTFS file system is mounted to another system with different PAGE_SIZE from the original system, log->page_size will change in log_replay(), but log->page_{mask,bits} don't change correspondingly. This will cause a panic because "u32 bytes = log->page_size - page_off" will get a negative value in the later read_log_page(). |
| CVE-2024-42298 | In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl: fsl_qmc_audio: Check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. |
| CVE-2024-42297 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to don't dirty inode for readonly filesystem syzbot reports f2fs bug as below: kernel BUG at fs/f2fs/inode.c:933! RIP: 0010:f2fs_evict_inode+0x1576/0x1590 fs/f2fs/inode.c:933 Call Trace: evict+0x2a4/0x620 fs/inode.c:664 dispose_list fs/inode.c:697 [inline] evict_inodes+0x5f8/0x690 fs/inode.c:747 generic_shutdown_super+0x9d/0x2c0 fs/super.c:675 kill_block_super+0x44/0x90 fs/super.c:1667 kill_f2fs_super+0x303/0x3b0 fs/f2fs/super.c:4894 deactivate_locked_super+0xc1/0x130 fs/super.c:484 cleanup_mnt+0x426/0x4c0 fs/namespace.c:1256 task_work_run+0x24a/0x300 kernel/task_work.c:180 ptrace_notify+0x2cd/0x380 kernel/signal.c:2399 ptrace_report_syscall include/linux/ptrace.h:411 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:473 [inline] syscall_exit_work kernel/entry/common.c:251 [inline] syscall_exit_to_user_mode_prepare kernel/entry/common.c:278 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline] syscall_exit_to_user_mode+0x15c/0x280 kernel/entry/common.c:296 do_syscall_64+0x50/0x110 arch/x86/entry/common.c:88 entry_SYSCALL_64_after_hwframe+0x63/0x6b The root cause is: - do_sys_open - f2fs_lookup - __f2fs_find_entry - f2fs_i_depth_write - f2fs_mark_inode_dirty_sync - f2fs_dirty_inode - set_inode_flag(inode, FI_DIRTY_INODE) - umount - kill_f2fs_super - kill_block_super - generic_shutdown_super - sync_filesystem : sb is readonly, skip sync_filesystem() - evict_inodes - iput - f2fs_evict_inode - f2fs_bug_on(sbi, is_inode_flag_set(inode, FI_DIRTY_INODE)) : trigger kernel panic When we try to repair i_current_depth in readonly filesystem, let's skip dirty inode to avoid panic in later f2fs_evict_inode(). |
| CVE-2024-42296 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix return value of f2fs_convert_inline_inode() If device is readonly, make f2fs_convert_inline_inode() return EROFS instead of zero, otherwise it may trigger panic during writeback of inline inode's dirty page as below: f2fs_write_single_data_page+0xbb6/0x1e90 fs/f2fs/data.c:2888 f2fs_write_cache_pages fs/f2fs/data.c:3187 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3342 [inline] f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3369 do_writepages+0x359/0x870 mm/page-writeback.c:2634 filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397 __filemap_fdatawrite_range mm/filemap.c:430 [inline] file_write_and_wait_range+0x1aa/0x290 mm/filemap.c:788 f2fs_do_sync_file+0x68a/0x1ae0 fs/f2fs/file.c:276 generic_write_sync include/linux/fs.h:2806 [inline] f2fs_file_write_iter+0x7bd/0x24e0 fs/f2fs/file.c:4977 call_write_iter include/linux/fs.h:2114 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xa72/0xc90 fs/read_write.c:590 ksys_write+0x1a0/0x2c0 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| CVE-2024-42295 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: handle inconsistent state in nilfs_btnode_create_block() Syzbot reported that a buffer state inconsistency was detected in nilfs_btnode_create_block(), triggering a kernel bug. It is not appropriate to treat this inconsistency as a bug; it can occur if the argument block address (the buffer index of the newly created block) is a virtual block number and has been reallocated due to corruption of the bitmap used to manage its allocation state. So, modify nilfs_btnode_create_block() and its callers to treat it as a possible filesystem error, rather than triggering a kernel bug. |
| CVE-2024-42294 | In the Linux kernel, the following vulnerability has been resolved: block: fix deadlock between sd_remove & sd_release Our test report the following hung task: [ 2538.459400] INFO: task "kworker/0:0":7 blocked for more than 188 seconds. [ 2538.459427] Call trace: [ 2538.459430] __switch_to+0x174/0x338 [ 2538.459436] __schedule+0x628/0x9c4 [ 2538.459442] schedule+0x7c/0xe8 [ 2538.459447] schedule_preempt_disabled+0x24/0x40 [ 2538.459453] __mutex_lock+0x3ec/0xf04 [ 2538.459456] __mutex_lock_slowpath+0x14/0x24 [ 2538.459459] mutex_lock+0x30/0xd8 [ 2538.459462] del_gendisk+0xdc/0x350 [ 2538.459466] sd_remove+0x30/0x60 [ 2538.459470] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459474] device_release_driver+0x18/0x28 [ 2538.459478] bus_remove_device+0x15c/0x174 [ 2538.459483] device_del+0x1d0/0x358 [ 2538.459488] __scsi_remove_device+0xa8/0x198 [ 2538.459493] scsi_forget_host+0x50/0x70 [ 2538.459497] scsi_remove_host+0x80/0x180 [ 2538.459502] usb_stor_disconnect+0x68/0xf4 [ 2538.459506] usb_unbind_interface+0xd4/0x280 [ 2538.459510] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459514] device_release_driver+0x18/0x28 [ 2538.459518] bus_remove_device+0x15c/0x174 [ 2538.459523] device_del+0x1d0/0x358 [ 2538.459528] usb_disable_device+0x84/0x194 [ 2538.459532] usb_disconnect+0xec/0x300 [ 2538.459537] hub_event+0xb80/0x1870 [ 2538.459541] process_scheduled_works+0x248/0x4dc [ 2538.459545] worker_thread+0x244/0x334 [ 2538.459549] kthread+0x114/0x1bc [ 2538.461001] INFO: task "fsck.":15415 blocked for more than 188 seconds. [ 2538.461014] Call trace: [ 2538.461016] __switch_to+0x174/0x338 [ 2538.461021] __schedule+0x628/0x9c4 [ 2538.461025] schedule+0x7c/0xe8 [ 2538.461030] blk_queue_enter+0xc4/0x160 [ 2538.461034] blk_mq_alloc_request+0x120/0x1d4 [ 2538.461037] scsi_execute_cmd+0x7c/0x23c [ 2538.461040] ioctl_internal_command+0x5c/0x164 [ 2538.461046] scsi_set_medium_removal+0x5c/0xb0 [ 2538.461051] sd_release+0x50/0x94 [ 2538.461054] blkdev_put+0x190/0x28c [ 2538.461058] blkdev_release+0x28/0x40 [ 2538.461063] __fput+0xf8/0x2a8 [ 2538.461066] __fput_sync+0x28/0x5c [ 2538.461070] __arm64_sys_close+0x84/0xe8 [ 2538.461073] invoke_syscall+0x58/0x114 [ 2538.461078] el0_svc_common+0xac/0xe0 [ 2538.461082] do_el0_svc+0x1c/0x28 [ 2538.461087] el0_svc+0x38/0x68 [ 2538.461090] el0t_64_sync_handler+0x68/0xbc [ 2538.461093] el0t_64_sync+0x1a8/0x1ac T1: T2: sd_remove del_gendisk __blk_mark_disk_dead blk_freeze_queue_start ++q->mq_freeze_depth bdev_release mutex_lock(&disk->open_mutex) sd_release scsi_execute_cmd blk_queue_enter wait_event(!q->mq_freeze_depth) mutex_lock(&disk->open_mutex) SCSI does not set GD_OWNS_QUEUE, so QUEUE_FLAG_DYING is not set in this scenario. This is a classic ABBA deadlock. To fix the deadlock, make sure we don't try to acquire disk->open_mutex after freezing the queue. |
| CVE-2024-42293 | In the Linux kernel, the following vulnerability has been resolved: arm64: mm: Fix lockless walks with static and dynamic page-table folding Lina reports random oopsen originating from the fast GUP code when 16K pages are used with 4-level page-tables, the fourth level being folded at runtime due to lack of LPA2. In this configuration, the generic implementation of p4d_offset_lockless() will return a 'p4d_t *' corresponding to the 'pgd_t' allocated on the stack of the caller, gup_fast_pgd_range(). This is normally fine, but when the fourth level of page-table is folded at runtime, pud_offset_lockless() will offset from the address of the 'p4d_t' to calculate the address of the PUD in the same page-table page. This results in a stray stack read when the 'p4d_t' has been allocated on the stack and can send the walker into the weeds. Fix the problem by providing our own definition of p4d_offset_lockless() when CONFIG_PGTABLE_LEVELS <= 4 which returns the real page-table pointer rather than the address of the local stack variable. |
| CVE-2024-42292 | In the Linux kernel, the following vulnerability has been resolved: kobject_uevent: Fix OOB access within zap_modalias_env() zap_modalias_env() wrongly calculates size of memory block to move, so will cause OOB memory access issue if variable MODALIAS is not the last one within its @env parameter, fixed by correcting size to memmove. |
| CVE-2024-42291 | In the Linux kernel, the following vulnerability has been resolved: ice: Add a per-VF limit on number of FDIR filters While the iavf driver adds a s/w limit (128) on the number of FDIR filters that the VF can request, a malicious VF driver can request more than that and exhaust the resources for other VFs. Add a similar limit in ice. |
| CVE-2024-42290 | In the Linux kernel, the following vulnerability has been resolved: irqchip/imx-irqsteer: Handle runtime power management correctly The power domain is automatically activated from clk_prepare(). However, on certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes sleeping functions, which triggers the 'scheduling while atomic' bug in the context switch path during device probing: BUG: scheduling while atomic: kworker/u13:1/48/0x00000002 Call trace: __schedule_bug+0x54/0x6c __schedule+0x7f0/0xa94 schedule+0x5c/0xc4 schedule_preempt_disabled+0x24/0x40 __mutex_lock.constprop.0+0x2c0/0x540 __mutex_lock_slowpath+0x14/0x20 mutex_lock+0x48/0x54 clk_prepare_lock+0x44/0xa0 clk_prepare+0x20/0x44 imx_irqsteer_resume+0x28/0xe0 pm_generic_runtime_resume+0x2c/0x44 __genpd_runtime_resume+0x30/0x80 genpd_runtime_resume+0xc8/0x2c0 __rpm_callback+0x48/0x1d8 rpm_callback+0x6c/0x78 rpm_resume+0x490/0x6b4 __pm_runtime_resume+0x50/0x94 irq_chip_pm_get+0x2c/0xa0 __irq_do_set_handler+0x178/0x24c irq_set_chained_handler_and_data+0x60/0xa4 mxc_gpio_probe+0x160/0x4b0 Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip callbacks and handle power management in them as they are invoked from non-atomic context. [ tglx: Rewrote change log, added Fixes tag ] |
| CVE-2024-42289 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: During vport delete send async logout explicitly During vport delete, it is observed that during unload we hit a crash because of stale entries in outstanding command array. For all these stale I/O entries, eh_abort was issued and aborted (fast_fail_io = 2009h) but I/Os could not complete while vport delete is in process of deleting. BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI Workqueue: qla2xxx_wq qla_do_work [qla2xxx] RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffa1e1e150fc68 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000001 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8ce208a7a0d0 RBP: ffff8ce208a7a0d0 R08: 0000000000000000 R09: ffff8ce378aac9c8 R10: ffff8ce378aac8a0 R11: ffffa1e1e150f9d8 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8ce378aac9c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8d217f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000002089acc000 CR4: 0000000000350ee0 Call Trace: <TASK> qla2xxx_qpair_sp_free_dma+0x417/0x4e0 ? qla2xxx_qpair_sp_compl+0x10d/0x1a0 ? qla2x00_status_entry+0x768/0x2830 ? newidle_balance+0x2f0/0x430 ? dequeue_entity+0x100/0x3c0 ? qla24xx_process_response_queue+0x6a1/0x19e0 ? __schedule+0x2d5/0x1140 ? qla_do_work+0x47/0x60 ? process_one_work+0x267/0x440 ? process_one_work+0x440/0x440 ? worker_thread+0x2d/0x3d0 ? process_one_work+0x440/0x440 ? kthread+0x156/0x180 ? set_kthread_struct+0x50/0x50 ? ret_from_fork+0x22/0x30 </TASK> Send out async logout explicitly for all the ports during vport delete. |
| CVE-2024-42288 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix for possible memory corruption Init Control Block is dereferenced incorrectly. Correctly dereference ICB |
| CVE-2024-42287 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Complete command early within lock A crash was observed while performing NPIV and FW reset, BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 1 PREEMPT_RT SMP NOPTI RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffc90026f47b88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000002 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8881041130d0 RBP: ffff8881041130d0 R08: 0000000000000000 R09: 0000000000000034 R10: ffffc90026f47c48 R11: 0000000000000031 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8881565e4a20 R15: 0000000000000000 FS: 00007f4c69ed3d00(0000) GS:ffff889faac80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000000288a50002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x16f/0x4a0 ? do_user_addr_fault+0x174/0x7f0 ? exc_page_fault+0x69/0x1a0 ? asm_exc_page_fault+0x22/0x30 ? dma_direct_unmap_sg+0x51/0x1e0 ? preempt_count_sub+0x96/0xe0 qla2xxx_qpair_sp_free_dma+0x29f/0x3b0 [qla2xxx] qla2xxx_qpair_sp_compl+0x60/0x80 [qla2xxx] __qla2x00_abort_all_cmds+0xa2/0x450 [qla2xxx] The command completion was done early while aborting the commands in driver unload path but outside lock to avoid the WARN_ON condition of performing dma_free_attr within the lock. However this caused race condition while command completion via multiple paths causing system crash. Hence complete the command early in unload path but within the lock to avoid race condition. |
| CVE-2024-42286 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: validate nvme_local_port correctly The driver load failed with error message, qla2xxx [0000:04:00.0]-ffff:0: register_localport failed: ret=ffffffef and with a kernel crash, BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 Workqueue: events_unbound qla_register_fcport_fn [qla2xxx] RIP: 0010:nvme_fc_register_remoteport+0x16/0x430 [nvme_fc] RSP: 0018:ffffaaa040eb3d98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9dfb46b78c00 RCX: 0000000000000000 RDX: ffff9dfb46b78da8 RSI: ffffaaa040eb3e08 RDI: 0000000000000000 RBP: ffff9dfb612a0a58 R08: ffffffffaf1d6270 R09: 3a34303a30303030 R10: 34303a303030305b R11: 2078787832616c71 R12: ffff9dfb46b78dd4 R13: ffff9dfb46b78c24 R14: ffff9dfb41525300 R15: ffff9dfb46b78da8 FS: 0000000000000000(0000) GS:ffff9dfc67c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000070 CR3: 000000018da10004 CR4: 00000000000206f0 Call Trace: qla_nvme_register_remote+0xeb/0x1f0 [qla2xxx] ? qla2x00_dfs_create_rport+0x231/0x270 [qla2xxx] qla2x00_update_fcport+0x2a1/0x3c0 [qla2xxx] qla_register_fcport_fn+0x54/0xc0 [qla2xxx] Exit the qla_nvme_register_remote() function when qla_nvme_register_hba() fails and correctly validate nvme_local_port. |
| CVE-2024-42285 | In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix a use-after-free related to destroying CM IDs iw_conn_req_handler() associates a new struct rdma_id_private (conn_id) with an existing struct iw_cm_id (cm_id) as follows: conn_id->cm_id.iw = cm_id; cm_id->context = conn_id; cm_id->cm_handler = cma_iw_handler; rdma_destroy_id() frees both the cm_id and the struct rdma_id_private. Make sure that cm_work_handler() does not trigger a use-after-free by only freeing of the struct rdma_id_private after all pending work has finished. |
| CVE-2024-42284 | In the Linux kernel, the following vulnerability has been resolved: tipc: Return non-zero value from tipc_udp_addr2str() on error tipc_udp_addr2str() should return non-zero value if the UDP media address is invalid. Otherwise, a buffer overflow access can occur in tipc_media_addr_printf(). Fix this by returning 1 on an invalid UDP media address. |
| CVE-2024-42283 | In the Linux kernel, the following vulnerability has been resolved: net: nexthop: Initialize all fields in dumped nexthops struct nexthop_grp contains two reserved fields that are not initialized by nla_put_nh_group(), and carry garbage. This can be observed e.g. with strace (edited for clarity): # ip nexthop add id 1 dev lo # ip nexthop add id 101 group 1 # strace -e recvmsg ip nexthop get id 101 ... recvmsg(... [{nla_len=12, nla_type=NHA_GROUP}, [{id=1, weight=0, resvd1=0x69, resvd2=0x67}]] ...) = 52 The fields are reserved and therefore not currently used. But as they are, they leak kernel memory, and the fact they are not just zero complicates repurposing of the fields for new ends. Initialize the full structure. |
| CVE-2024-42282 | In the Linux kernel, the following vulnerability has been resolved: net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling Move the freeing of the dummy net_device from mtk_free_dev() to mtk_remove(). Previously, if alloc_netdev_dummy() failed in mtk_probe(), eth->dummy_dev would be NULL. The error path would then call mtk_free_dev(), which in turn called free_netdev() assuming dummy_dev was allocated (but it was not), potentially causing a NULL pointer dereference. By moving free_netdev() to mtk_remove(), we ensure it's only called when mtk_probe() has succeeded and dummy_dev is fully allocated. This addresses a potential NULL pointer dereference detected by Smatch[1]. |
| CVE-2024-42281 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a segment issue when downgrading gso_size Linearize the skb when downgrading gso_size because it may trigger a BUG_ON() later when the skb is segmented as described in [1,2]. |
| CVE-2024-42280 | In the Linux kernel, the following vulnerability has been resolved: mISDN: Fix a use after free in hfcmulti_tx() Don't dereference *sp after calling dev_kfree_skb(*sp). |
| CVE-2024-42279 | In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer While transmitting with rx_len == 0, the RX FIFO is not going to be emptied in the interrupt handler. A subsequent transfer could then read crap from the previous transfer out of the RX FIFO into the start RX buffer. The core provides a register that will empty the RX and TX FIFOs, so do that before each transfer. |
| CVE-2024-42278 | In the Linux kernel, the following vulnerability has been resolved: ASoC: TAS2781: Fix tasdev_load_calibrated_data() This function has a reversed if statement so it's either a no-op or it leads to a NULL dereference. |
| CVE-2024-42277 | In the Linux kernel, the following vulnerability has been resolved: iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en In sprd_iommu_cleanup() before calling function sprd_iommu_hw_en() dom->sdev is equal to NULL, which leads to null dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-42276 | In the Linux kernel, the following vulnerability has been resolved: nvme-pci: add missing condition check for existence of mapped data nvme_map_data() is called when request has physical segments, hence the nvme_unmap_data() should have same condition to avoid dereference. |
| CVE-2024-42275 | In the Linux kernel, the following vulnerability has been resolved: drm/client: Fix error code in drm_client_buffer_vmap_local() This function accidentally returns zero/success on the failure path. It leads to locking issues and an uninitialized *map_copy in the caller. |
| CVE-2024-42274 | In the Linux kernel, the following vulnerability has been resolved: Revert "ALSA: firewire-lib: operate for period elapse event in process context" Commit 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period elapse event in process context") removed the process context workqueue from amdtp_domain_stream_pcm_pointer() and update_pcm_pointers() to remove its overhead. With RME Fireface 800, this lead to a regression since Kernels 5.14.0, causing an AB/BA deadlock competition for the substream lock with eventual system freeze under ALSA operation: thread 0: * (lock A) acquire substream lock by snd_pcm_stream_lock_irq() in snd_pcm_status64() * (lock B) wait for tasklet to finish by calling tasklet_unlock_spin_wait() in tasklet_disable_in_atomic() in ohci_flush_iso_completions() of ohci.c thread 1: * (lock B) enter tasklet * (lock A) attempt to acquire substream lock, waiting for it to be released: snd_pcm_stream_lock_irqsave() in snd_pcm_period_elapsed() in update_pcm_pointers() in process_ctx_payloads() in process_rx_packets() of amdtp-stream.c ? tasklet_unlock_spin_wait </NMI> <TASK> ohci_flush_iso_completions firewire_ohci amdtp_domain_stream_pcm_pointer snd_firewire_lib snd_pcm_update_hw_ptr0 snd_pcm snd_pcm_status64 snd_pcm ? native_queued_spin_lock_slowpath </NMI> <IRQ> _raw_spin_lock_irqsave snd_pcm_period_elapsed snd_pcm process_rx_packets snd_firewire_lib irq_target_callback snd_firewire_lib handle_it_packet firewire_ohci context_tasklet firewire_ohci Restore the process context work queue to prevent deadlock AB/BA deadlock competition for ALSA substream lock of snd_pcm_stream_lock_irq() in snd_pcm_status64() and snd_pcm_stream_lock_irqsave() in snd_pcm_period_elapsed(). revert commit 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period elapse event in process context") Replace inline description to prevent future deadlock. |
| CVE-2024-42273 | In the Linux kernel, the following vulnerability has been resolved: f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid mkdir /mnt/test/comp f2fs_io setflags compression /mnt/test/comp dd if=/dev/zero of=/mnt/test/comp/testfile bs=16k count=1 truncate --size 13 /mnt/test/comp/testfile In the above scenario, we can get a BUG_ON. kernel BUG at fs/f2fs/segment.c:3589! Call Trace: do_write_page+0x78/0x390 [f2fs] f2fs_outplace_write_data+0x62/0xb0 [f2fs] f2fs_do_write_data_page+0x275/0x740 [f2fs] f2fs_write_single_data_page+0x1dc/0x8f0 [f2fs] f2fs_write_multi_pages+0x1e5/0xae0 [f2fs] f2fs_write_cache_pages+0xab1/0xc60 [f2fs] f2fs_write_data_pages+0x2d8/0x330 [f2fs] do_writepages+0xcf/0x270 __writeback_single_inode+0x44/0x350 writeback_sb_inodes+0x242/0x530 __writeback_inodes_wb+0x54/0xf0 wb_writeback+0x192/0x310 wb_workfn+0x30d/0x400 The reason is we gave CURSEG_ALL_DATA_ATGC to COMPR_ADDR where the page was set the gcing flag by set_cluster_dirty(). |
| CVE-2024-42272 | In the Linux kernel, the following vulnerability has been resolved: sched: act_ct: take care of padding in struct zones_ht_key Blamed commit increased lookup key size from 2 bytes to 16 bytes, because zones_ht_key got a struct net pointer. Make sure rhashtable_lookup() is not using the padding bytes which are not initialized. BUG: KMSAN: uninit-value in rht_ptr_rcu include/linux/rhashtable.h:376 [inline] BUG: KMSAN: uninit-value in __rhashtable_lookup include/linux/rhashtable.h:607 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] BUG: KMSAN: uninit-value in tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 rht_ptr_rcu include/linux/rhashtable.h:376 [inline] __rhashtable_lookup include/linux/rhashtable.h:607 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408 tcf_action_init_1+0x6cc/0xb30 net/sched/act_api.c:1425 tcf_action_init+0x458/0xf00 net/sched/act_api.c:1488 tcf_action_add net/sched/act_api.c:2061 [inline] tc_ctl_action+0x4be/0x19d0 net/sched/act_api.c:2118 rtnetlink_rcv_msg+0x12fc/0x1410 net/core/rtnetlink.c:6647 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2550 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6665 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2597 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2651 __sys_sendmsg net/socket.c:2680 [inline] __do_sys_sendmsg net/socket.c:2689 [inline] __se_sys_sendmsg net/socket.c:2687 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2687 x64_sys_call+0x2dd6/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable key created at: tcf_ct_flow_table_get+0x4a/0x2260 net/sched/act_ct.c:324 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408 |
| CVE-2024-42271 | In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use after free in iucv_sock_close() iucv_sever_path() is called from process context and from bh context. iucv->path is used as indicator whether somebody else is taking care of severing the path (or it is already removed / never existed). This needs to be done with atomic compare and swap, otherwise there is a small window where iucv_sock_close() will try to work with a path that has already been severed and freed by iucv_callback_connrej() called by iucv_tasklet_fn(). Example: [452744.123844] Call Trace: [452744.123845] ([<0000001e87f03880>] 0x1e87f03880) [452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138 [452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv] [452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv] [452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv] [452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8 [452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48 [452744.124820] [<00000000d5421642>] __fput+0xba/0x268 [452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0 [452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90 [452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8 [452744.125319] Last Breaking-Event-Address: [452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138 [452744.125324] [452744.125325] Kernel panic - not syncing: Fatal exception in interrupt Note that bh_lock_sock() is not serializing the tasklet context against process context, because the check for sock_owned_by_user() and corresponding handling is missing. Ideas for a future clean-up patch: A) Correct usage of bh_lock_sock() in tasklet context, as described in Re-enqueue, if needed. This may require adding return values to the tasklet functions and thus changes to all users of iucv. B) Change iucv tasklet into worker and use only lock_sock() in af_iucv. |
| CVE-2024-42270 | In the Linux kernel, the following vulnerability has been resolved: netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init(). We had a report that iptables-restore sometimes triggered null-ptr-deref at boot time. [0] The problem is that iptable_nat_table_init() is exposed to user space before the kernel fully initialises netns. In the small race window, a user could call iptable_nat_table_init() that accesses net_generic(net, iptable_nat_net_id), which is available only after registering iptable_nat_net_ops. Let's call register_pernet_subsys() before xt_register_template(). [0]: bpfilter: Loaded bpfilter_umh pid 11702 Started bpfilter BUG: kernel NULL pointer dereference, address: 0000000000000013 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page PGD 0 P4D 0 PREEMPT SMP NOPTI CPU: 2 PID: 11879 Comm: iptables-restor Not tainted 6.1.92-99.174.amzn2023.x86_64 #1 Hardware name: Amazon EC2 c6i.4xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat Code: 10 4c 89 f6 48 89 ef e8 0b 19 bb ff 41 89 c4 85 c0 75 38 41 83 c7 01 49 83 c6 28 41 83 ff 04 75 dc 48 8b 44 24 08 48 8b 0c 24 <48> 89 08 4c 89 ef e8 a2 3b a2 cf 48 83 c4 10 44 89 e0 5b 5d 41 5c RSP: 0018:ffffbef902843cd0 EFLAGS: 00010246 RAX: 0000000000000013 RBX: ffff9f4b052caa20 RCX: ffff9f4b20988d80 RDX: 0000000000000000 RSI: 0000000000000064 RDI: ffffffffc04201c0 RBP: ffff9f4b29394000 R08: ffff9f4b07f77258 R09: ffff9f4b07f77240 R10: 0000000000000000 R11: ffff9f4b09635388 R12: 0000000000000000 R13: ffff9f4b1a3c6c00 R14: ffff9f4b20988e20 R15: 0000000000000004 FS: 00007f6284340000(0000) GS:ffff9f51fe280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000013 CR3: 00000001d10a6005 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? xt_find_table_lock (net/netfilter/x_tables.c:1259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? page_fault_oops (arch/x86/mm/fault.c:727) ? exc_page_fault (./arch/x86/include/asm/irqflags.h:40 ./arch/x86/include/asm/irqflags.h:75 arch/x86/mm/fault.c:1470 arch/x86/mm/fault.c:1518) ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:570) ? iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat xt_find_table_lock (net/netfilter/x_tables.c:1259) xt_request_find_table_lock (net/netfilter/x_tables.c:1287) get_info (net/ipv4/netfilter/ip_tables.c:965) ? security_capable (security/security.c:809 (discriminator 13)) ? ns_capable (kernel/capability.c:376 kernel/capability.c:397) ? do_ipt_get_ctl (net/ipv4/netfilter/ip_tables.c:1656) ? bpfilter_send_req (net/bpfilter/bpfilter_kern.c:52) bpfilter nf_getsockopt (net/netfilter/nf_sockopt.c:116) ip_getsockopt (net/ipv4/ip_sockglue.c:1827) __sys_getsockopt (net/socket.c:2327) __x64_sys_getsockopt (net/socket.c:2342 net/socket.c:2339 net/socket.c:2339) do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:81) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) RIP: 0033:0x7f62844685ee Code: 48 8b 0d 45 28 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 09 RSP: 002b:00007ffd1f83d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00007ffd1f83d680 RCX: 00007f62844685ee RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 0000000000000004 R08: 00007ffd1f83d670 R09: 0000558798ffa2a0 R10: 00007ffd1f83d680 R11: 0000000000000246 R12: 00007ffd1f83e3b2 R13: 00007f6284 ---truncated--- |
| CVE-2024-42269 | In the Linux kernel, the following vulnerability has been resolved: netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init(). ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id], but the function is exposed to user space before the entry is allocated via register_pernet_subsys(). Let's call register_pernet_subsys() before xt_register_template(). |
| CVE-2024-42268 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix missing lock on sync reset reload On sync reset reload work, when remote host updates devlink on reload actions performed on that host, it misses taking devlink lock before calling devlink_remote_reload_actions_performed() which results in triggering lock assert like the following: WARNING: CPU: 4 PID: 1164 at net/devlink/core.c:261 devl_assert_locked+0x3e/0x50 … CPU: 4 PID: 1164 Comm: kworker/u96:6 Tainted: G S W 6.10.0-rc2+ #116 Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0 12/18/2015 Workqueue: mlx5_fw_reset_events mlx5_sync_reset_reload_work [mlx5_core] RIP: 0010:devl_assert_locked+0x3e/0x50 … Call Trace: <TASK> ? __warn+0xa4/0x210 ? devl_assert_locked+0x3e/0x50 ? report_bug+0x160/0x280 ? handle_bug+0x3f/0x80 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? devl_assert_locked+0x3e/0x50 devlink_notify+0x88/0x2b0 ? mlx5_attach_device+0x20c/0x230 [mlx5_core] ? __pfx_devlink_notify+0x10/0x10 ? process_one_work+0x4b6/0xbb0 process_one_work+0x4b6/0xbb0 […] |
| CVE-2024-42267 | In the Linux kernel, the following vulnerability has been resolved: riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error() Handle VM_FAULT_SIGSEGV in the page fault path so that we correctly kill the process and we don't BUG() the kernel. |
| CVE-2024-42266 | In the Linux kernel, the following vulnerability has been resolved: btrfs: make cow_file_range_inline() honor locked_page on error The btrfs buffered write path runs through __extent_writepage() which has some tricky return value handling for writepage_delalloc(). Specifically, when that returns 1, we exit, but for other return values we continue and end up calling btrfs_folio_end_all_writers(). If the folio has been unlocked (note that we check the PageLocked bit at the start of __extent_writepage()), this results in an assert panic like this one from syzbot: BTRFS: error (device loop0 state EAL) in free_log_tree:3267: errno=-5 IO failure BTRFS warning (device loop0 state EAL): Skipping commit of aborted transaction. BTRFS: error (device loop0 state EAL) in cleanup_transaction:2018: errno=-5 IO failure assertion failed: folio_test_locked(folio), in fs/btrfs/subpage.c:871 ------------[ cut here ]------------ kernel BUG at fs/btrfs/subpage.c:871! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 5090 Comm: syz-executor225 Not tainted 6.10.0-syzkaller-05505-gb1bc554e009e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:btrfs_folio_end_all_writers+0x55b/0x610 fs/btrfs/subpage.c:871 Code: e9 d3 fb ff ff e8 25 22 c2 fd 48 c7 c7 c0 3c 0e 8c 48 c7 c6 80 3d 0e 8c 48 c7 c2 60 3c 0e 8c b9 67 03 00 00 e8 66 47 ad 07 90 <0f> 0b e8 6e 45 b0 07 4c 89 ff be 08 00 00 00 e8 21 12 25 fe 4c 89 RSP: 0018:ffffc900033d72e0 EFLAGS: 00010246 RAX: 0000000000000045 RBX: 00fff0000000402c RCX: 663b7a08c50a0a00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffffc900033d73b0 R08: ffffffff8176b98c R09: 1ffff9200067adfc R10: dffffc0000000000 R11: fffff5200067adfd R12: 0000000000000001 R13: dffffc0000000000 R14: 0000000000000000 R15: ffffea0001cbee80 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5f076012f8 CR3: 000000000e134000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __extent_writepage fs/btrfs/extent_io.c:1597 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2251 [inline] btrfs_writepages+0x14d7/0x2760 fs/btrfs/extent_io.c:2373 do_writepages+0x359/0x870 mm/page-writeback.c:2656 filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397 __filemap_fdatawrite_range mm/filemap.c:430 [inline] __filemap_fdatawrite mm/filemap.c:436 [inline] filemap_flush+0xdf/0x130 mm/filemap.c:463 btrfs_release_file+0x117/0x130 fs/btrfs/file.c:1547 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:222 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:877 do_group_exit+0x207/0x2c0 kernel/exit.c:1026 __do_sys_exit_group kernel/exit.c:1037 [inline] __se_sys_exit_group kernel/exit.c:1035 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1035 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5f075b70c9 Code: Unable to access opcode bytes at 0x7f5f075b709f. I was hitting the same issue by doing hundreds of accelerated runs of generic/475, which also hits IO errors by design. I instrumented that reproducer with bpftrace and found that the undesirable folio_unlock was coming from the following callstack: folio_unlock+5 __process_pages_contig+475 cow_file_range_inline.constprop.0+230 cow_file_range+803 btrfs_run_delalloc_range+566 writepage_delalloc+332 __extent_writepage # inlined in my stacktrace, but I added it here extent_write_cache_pages+622 Looking at the bisected-to pa ---truncated--- |
| CVE-2024-42265 | In the Linux kernel, the following vulnerability has been resolved: protect the fetch of ->fd[fd] in do_dup2() from mispredictions both callers have verified that fd is not greater than ->max_fds; however, misprediction might end up with tofree = fdt->fd[fd]; being speculatively executed. That's wrong for the same reasons why it's wrong in close_fd()/file_close_fd_locked(); the same solution applies - array_index_nospec(fd, fdt->max_fds) could differ from fd only in case of speculative execution on mispredicted path. |
| CVE-2024-42264 | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Prevent out of bounds access in performance query extensions Check that the number of perfmons userspace is passing in the copy and reset extensions is not greater than the internal kernel storage where the ids will be copied into. (cherry picked from commit f32b5128d2c440368b5bf3a7a356823e235caabb) |
| CVE-2024-42263 | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix potential memory leak in the timestamp extension If fetching of userspace memory fails during the main loop, all drm sync objs looked up until that point will be leaked because of the missing drm_syncobj_put. Fix it by exporting and using a common cleanup helper. (cherry picked from commit 753ce4fea62182c77e1691ab4f9022008f25b62e) |
| CVE-2024-42262 | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix potential memory leak in the performance extension If fetching of userspace memory fails during the main loop, all drm sync objs looked up until that point will be leaked because of the missing drm_syncobj_put. Fix it by exporting and using a common cleanup helper. (cherry picked from commit 484de39fa5f5b7bd0c5f2e2c5265167250ef7501) |
| CVE-2024-42261 | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Validate passed in drm syncobj handles in the timestamp extension If userspace provides an unknown or invalid handle anywhere in the handle array the rest of the driver will not handle that well. Fix it by checking handle was looked up successfully or otherwise fail the extension by jumping into the existing unwind. (cherry picked from commit 8d1276d1b8f738c3afe1457d4dff5cc66fc848a3) |
| CVE-2024-42260 | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Validate passed in drm syncobj handles in the performance extension If userspace provides an unknown or invalid handle anywhere in the handle array the rest of the driver will not handle that well. Fix it by checking handle was looked up successfully or otherwise fail the extension by jumping into the existing unwind. (cherry picked from commit a546b7e4d73c23838d7e4d2c92882b3ca902d213) |
| CVE-2024-42259 | In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix Virtual Memory mapping boundaries calculation Calculating the size of the mapped area as the lesser value between the requested size and the actual size does not consider the partial mapping offset. This can cause page fault access. Fix the calculation of the starting and ending addresses, the total size is now deduced from the difference between the end and start addresses. Additionally, the calculations have been rewritten in a clearer and more understandable form. [Joonas: Add Requires: tag] Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset") (cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417) |
| CVE-2024-42258 | In the Linux kernel, the following vulnerability has been resolved: mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machines Yves-Alexis Perez reported commit 4ef9ad19e176 ("mm: huge_memory: don't force huge page alignment on 32 bit") didn't work for x86_32 [1]. It is because x86_32 uses CONFIG_X86_32 instead of CONFIG_32BIT. !CONFIG_64BIT should cover all 32 bit machines. [1] https://lore.kernel.org/linux-mm/CAHbLzkr1LwH3pcTgM+aGQ31ip2bKqiqEQ8=FQB+t2c3dhNKNHA@mail.gmail.com/ |
| CVE-2024-42257 | In the Linux kernel, the following vulnerability has been resolved: ext4: use memtostr_pad() for s_volume_name As with the other strings in struct ext4_super_block, s_volume_name is not NUL terminated. The other strings were marked in commit 072ebb3bffe6 ("ext4: add nonstring annotations to ext4.h"). Using strscpy() isn't the right replacement for strncpy(); it should use memtostr_pad() instead. |
| CVE-2024-42256 | In the Linux kernel, the following vulnerability has been resolved: cifs: Fix server re-repick on subrequest retry When a subrequest is marked for needing retry, netfs will call cifs_prepare_write() which will make cifs repick the server for the op before renegotiating credits; it then calls cifs_issue_write() which invokes smb2_async_writev() - which re-repicks the server. If a different server is then selected, this causes the increment of server->in_flight to happen against one record and the decrement to happen against another, leading to misaccounting. Fix this by just removing the repick code in smb2_async_writev(). As this is only called from netfslib-driven code, cifs_prepare_write() should always have been called first, and so server should never be NULL and the preparatory step is repeated in the event that we do a retry. The problem manifests as a warning looking something like: WARNING: CPU: 4 PID: 72896 at fs/smb/client/smb2ops.c:97 smb2_add_credits+0x3f0/0x9e0 [cifs] ... RIP: 0010:smb2_add_credits+0x3f0/0x9e0 [cifs] ... smb2_writev_callback+0x334/0x560 [cifs] cifs_demultiplex_thread+0x77a/0x11b0 [cifs] kthread+0x187/0x1d0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 Which may be triggered by a number of different xfstests running against an Azure server in multichannel mode. generic/249 seems the most repeatable, but generic/215, generic/249 and generic/308 may also show it. |
| CVE-2024-42255 | In the Linux kernel, the following vulnerability has been resolved: tpm: Use auth only after NULL check in tpm_buf_check_hmac_response() Dereference auth after NULL check in tpm_buf_check_hmac_response(). Otherwise, unless tpm2_sessions_init() was called, a call can cause NULL dereference, when TCG_TPM2_HMAC is enabled. [jarkko: adjusted the commit message.] |
| CVE-2024-42254 | In the Linux kernel, the following vulnerability has been resolved: io_uring: fix error pbuf checking Syz reports a problem, which boils down to NULL vs IS_ERR inconsistent error handling in io_alloc_pbuf_ring(). KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__io_remove_buffers+0xac/0x700 io_uring/kbuf.c:341 Call Trace: <TASK> io_put_bl io_uring/kbuf.c:378 [inline] io_destroy_buffers+0x14e/0x490 io_uring/kbuf.c:392 io_ring_ctx_free+0xa00/0x1070 io_uring/io_uring.c:2613 io_ring_exit_work+0x80f/0x8a0 io_uring/io_uring.c:2844 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd40 kernel/workqueue.c:3390 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 |
| CVE-2024-42253 | In the Linux kernel, the following vulnerability has been resolved: gpio: pca953x: fix pca953x_irq_bus_sync_unlock race Ensure that `i2c_lock' is held when setting interrupt latch and mask in pca953x_irq_bus_sync_unlock() in order to avoid races. The other (non-probe) call site pca953x_gpio_set_multiple() ensures the lock is held before calling pca953x_write_regs(). The problem occurred when a request raced against irq_bus_sync_unlock() approximately once per thousand reboots on an i.MX8MP based system. * Normal case 0-0022: write register AI|3a {03,02,00,00,01} Input latch P0 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 * Race case 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|08 {03,02,00,00,01} *** Wrong register *** 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0 |
| CVE-2024-42252 | In the Linux kernel, the following vulnerability has been resolved: closures: Change BUG_ON() to WARN_ON() If a BUG_ON() can be hit in the wild, it shouldn't be a BUG_ON() For reference, this has popped up once in the CI, and we'll need more info to debug it: 03240 ------------[ cut here ]------------ 03240 kernel BUG at lib/closure.c:21! 03240 kernel BUG at lib/closure.c:21! 03240 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP 03240 Modules linked in: 03240 CPU: 15 PID: 40534 Comm: kworker/u80:1 Not tainted 6.10.0-rc4-ktest-ga56da69799bd #25570 03240 Hardware name: linux,dummy-virt (DT) 03240 Workqueue: btree_update btree_interior_update_work 03240 pstate: 00001005 (nzcv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 03240 pc : closure_put+0x224/0x2a0 03240 lr : closure_put+0x24/0x2a0 03240 sp : ffff0000d12071c0 03240 x29: ffff0000d12071c0 x28: dfff800000000000 x27: ffff0000d1207360 03240 x26: 0000000000000040 x25: 0000000000000040 x24: 0000000000000040 03240 x23: ffff0000c1f20180 x22: 0000000000000000 x21: ffff0000c1f20168 03240 x20: 0000000040000000 x19: ffff0000c1f20140 x18: 0000000000000001 03240 x17: 0000000000003aa0 x16: 0000000000003ad0 x15: 1fffe0001c326974 03240 x14: 0000000000000a1e x13: 0000000000000000 x12: 1fffe000183e402d 03240 x11: ffff6000183e402d x10: dfff800000000000 x9 : ffff6000183e402e 03240 x8 : 0000000000000001 x7 : 00009fffe7c1bfd3 x6 : ffff0000c1f2016b 03240 x5 : ffff0000c1f20168 x4 : ffff6000183e402e x3 : ffff800081391954 03240 x2 : 0000000000000001 x1 : 0000000000000000 x0 : 00000000a8000000 03240 Call trace: 03240 closure_put+0x224/0x2a0 03240 bch2_check_for_deadlock+0x910/0x1028 03240 bch2_six_check_for_deadlock+0x1c/0x30 03240 six_lock_slowpath.isra.0+0x29c/0xed0 03240 six_lock_ip_waiter+0xa8/0xf8 03240 __bch2_btree_node_lock_write+0x14c/0x298 03240 bch2_trans_lock_write+0x6d4/0xb10 03240 __bch2_trans_commit+0x135c/0x5520 03240 btree_interior_update_work+0x1248/0x1c10 03240 process_scheduled_works+0x53c/0xd90 03240 worker_thread+0x370/0x8c8 03240 kthread+0x258/0x2e8 03240 ret_from_fork+0x10/0x20 03240 Code: aa1303e0 d63f0020 a94363f7 17ffff8c (d4210000) 03240 ---[ end trace 0000000000000000 ]--- 03240 Kernel panic - not syncing: Oops - BUG: Fatal exception 03240 SMP: stopping secondary CPUs 03241 SMP: failed to stop secondary CPUs 13,15 03241 Kernel Offset: disabled 03241 CPU features: 0x00,00000003,80000008,4240500b 03241 Memory Limit: none 03241 ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception ]--- 03246 ========= FAILED TIMEOUT copygc_torture_no_checksum in 7200s |
| CVE-2024-42251 | In the Linux kernel, the following vulnerability has been resolved: mm: page_ref: remove folio_try_get_rcu() The below bug was reported on a non-SMP kernel: [ 275.267158][ T4335] ------------[ cut here ]------------ [ 275.267949][ T4335] kernel BUG at include/linux/page_ref.h:275! [ 275.268526][ T4335] invalid opcode: 0000 [#1] KASAN PTI [ 275.269001][ T4335] CPU: 0 PID: 4335 Comm: trinity-c3 Not tainted 6.7.0-rc4-00061-gefa7df3e3bb5 #1 [ 275.269787][ T4335] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 275.270679][ T4335] RIP: 0010:try_get_folio (include/linux/page_ref.h:275 (discriminator 3) mm/gup.c:79 (discriminator 3)) [ 275.272813][ T4335] RSP: 0018:ffffc90005dcf650 EFLAGS: 00010202 [ 275.273346][ T4335] RAX: 0000000000000246 RBX: ffffea00066e0000 RCX: 0000000000000000 [ 275.274032][ T4335] RDX: fffff94000cdc007 RSI: 0000000000000004 RDI: ffffea00066e0034 [ 275.274719][ T4335] RBP: ffffea00066e0000 R08: 0000000000000000 R09: fffff94000cdc006 [ 275.275404][ T4335] R10: ffffea00066e0037 R11: 0000000000000000 R12: 0000000000000136 [ 275.276106][ T4335] R13: ffffea00066e0034 R14: dffffc0000000000 R15: ffffea00066e0008 [ 275.276790][ T4335] FS: 00007fa2f9b61740(0000) GS:ffffffff89d0d000(0000) knlGS:0000000000000000 [ 275.277570][ T4335] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 275.278143][ T4335] CR2: 00007fa2f6c00000 CR3: 0000000134b04000 CR4: 00000000000406f0 [ 275.278833][ T4335] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 275.279521][ T4335] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 275.280201][ T4335] Call Trace: [ 275.280499][ T4335] <TASK> [ 275.280751][ T4335] ? die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434 arch/x86/kernel/dumpstack.c:447) [ 275.281087][ T4335] ? do_trap (arch/x86/kernel/traps.c:112 arch/x86/kernel/traps.c:153) [ 275.281463][ T4335] ? try_get_folio (include/linux/page_ref.h:275 (discriminator 3) mm/gup.c:79 (discriminator 3)) [ 275.281884][ T4335] ? try_get_folio (include/linux/page_ref.h:275 (discriminator 3) mm/gup.c:79 (discriminator 3)) [ 275.282300][ T4335] ? do_error_trap (arch/x86/kernel/traps.c:174) [ 275.282711][ T4335] ? try_get_folio (include/linux/page_ref.h:275 (discriminator 3) mm/gup.c:79 (discriminator 3)) [ 275.283129][ T4335] ? handle_invalid_op (arch/x86/kernel/traps.c:212) [ 275.283561][ T4335] ? try_get_folio (include/linux/page_ref.h:275 (discriminator 3) mm/gup.c:79 (discriminator 3)) [ 275.283990][ T4335] ? exc_invalid_op (arch/x86/kernel/traps.c:264) [ 275.284415][ T4335] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:568) [ 275.284859][ T4335] ? try_get_folio (include/linux/page_ref.h:275 (discriminator 3) mm/gup.c:79 (discriminator 3)) [ 275.285278][ T4335] try_grab_folio (mm/gup.c:148) [ 275.285684][ T4335] __get_user_pages (mm/gup.c:1297 (discriminator 1)) [ 275.286111][ T4335] ? __pfx___get_user_pages (mm/gup.c:1188) [ 275.286579][ T4335] ? __pfx_validate_chain (kernel/locking/lockdep.c:3825) [ 275.287034][ T4335] ? mark_lock (kernel/locking/lockdep.c:4656 (discriminator 1)) [ 275.287416][ T4335] __gup_longterm_locked (mm/gup.c:1509 mm/gup.c:2209) [ 275.288192][ T4335] ? __pfx___gup_longterm_locked (mm/gup.c:2204) [ 275.288697][ T4335] ? __pfx_lock_acquire (kernel/locking/lockdep.c:5722) [ 275.289135][ T4335] ? __pfx___might_resched (kernel/sched/core.c:10106) [ 275.289595][ T4335] pin_user_pages_remote (mm/gup.c:3350) [ 275.290041][ T4335] ? __pfx_pin_user_pages_remote (mm/gup.c:3350) [ 275.290545][ T4335] ? find_held_lock (kernel/locking/lockdep.c:5244 (discriminator 1)) [ 275.290961][ T4335] ? mm_access (kernel/fork.c:1573) [ 275.291353][ T4335] process_vm_rw_single_vec+0x142/0x360 [ 275.291900][ T4335] ? __pfx_process_vm_rw_single_vec+0x10/0x10 [ 275.292471][ T4335] ? mm_access (kernel/fork.c:1573) [ 275.292859][ T4335] process_vm_rw_core+0x272/0x4e0 [ 275.293384][ T4335] ? hlock_class (a ---truncated--- |
| CVE-2024-42250 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: add missing lock protection when polling Add missing lock protection in poll routine when iterating xarray, otherwise: Even with RCU read lock held, only the slot of the radix tree is ensured to be pinned there, while the data structure (e.g. struct cachefiles_req) stored in the slot has no such guarantee. The poll routine will iterate the radix tree and dereference cachefiles_req accordingly. Thus RCU read lock is not adequate in this case and spinlock is needed here. |
| CVE-2024-42249 | In the Linux kernel, the following vulnerability has been resolved: spi: don't unoptimize message in spi_async() Calling spi_maybe_unoptimize_message() in spi_async() is wrong because the message is likely to be in the queue and not transferred yet. This can corrupt the message while it is being used by the controller driver. spi_maybe_unoptimize_message() is already called in the correct place in spi_finalize_current_message() to balance the call to spi_maybe_optimize_message() in spi_async(). |
| CVE-2024-42248 | In the Linux kernel, the following vulnerability has been resolved: tty: serial: ma35d1: Add a NULL check for of_node The pdev->dev.of_node can be NULL if the "serial" node is absent. Add a NULL check to return an error in such cases. |
| CVE-2024-42247 | In the Linux kernel, the following vulnerability has been resolved: wireguard: allowedips: avoid unaligned 64-bit memory accesses On the parisc platform, the kernel issues kernel warnings because swap_endian() tries to load a 128-bit IPv6 address from an unaligned memory location: Kernel: unaligned access to 0x55f4688c in wg_allowedips_insert_v6+0x2c/0x80 [wireguard] (iir 0xf3010df) Kernel: unaligned access to 0x55f46884 in wg_allowedips_insert_v6+0x38/0x80 [wireguard] (iir 0xf2010dc) Avoid such unaligned memory accesses by instead using the get_unaligned_be64() helper macro. [Jason: replace src[8] in original patch with src+8] |
| CVE-2024-42246 | In the Linux kernel, the following vulnerability has been resolved: net, sunrpc: Remap EPERM in case of connection failure in xs_tcp_setup_socket When using a BPF program on kernel_connect(), the call can return -EPERM. This causes xs_tcp_setup_socket() to loop forever, filling up the syslog and causing the kernel to potentially freeze up. Neil suggested: This will propagate -EPERM up into other layers which might not be ready to handle it. It might be safer to map EPERM to an error we would be more likely to expect from the network system - such as ECONNREFUSED or ENETDOWN. ECONNREFUSED as error seems reasonable. For programs setting a different error can be out of reach (see handling in 4fbac77d2d09) in particular on kernels which do not have f10d05966196 ("bpf: Make BPF_PROG_RUN_ARRAY return -err instead of allow boolean"), thus given that it is better to simply remap for consistent behavior. UDP does handle EPERM in xs_udp_send_request(). |
| CVE-2024-42245 | In the Linux kernel, the following vulnerability has been resolved: Revert "sched/fair: Make sure to try to detach at least one movable task" This reverts commit b0defa7ae03ecf91b8bfd10ede430cff12fcbd06. b0defa7ae03ec changed the load balancing logic to ignore env.max_loop if all tasks examined to that point were pinned. The goal of the patch was to make it more likely to be able to detach a task buried in a long list of pinned tasks. However, this has the unfortunate side effect of creating an O(n) iteration in detach_tasks(), as we now must fully iterate every task on a cpu if all or most are pinned. Since this load balance code is done with rq lock held, and often in softirq context, it is very easy to trigger hard lockups. We observed such hard lockups with a user who affined O(10k) threads to a single cpu. When I discussed this with Vincent he initially suggested that we keep the limit on the number of tasks to detach, but increase the number of tasks we can search. However, after some back and forth on the mailing list, he recommended we instead revert the original patch, as it seems likely no one was actually getting hit by the original issue. |
| CVE-2024-42244 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: mos7840: fix crash on resume Since commit c49cfa917025 ("USB: serial: use generic method if no alternative is provided in usb serial layer"), USB serial core calls the generic resume implementation when the driver has not provided one. This can trigger a crash on resume with mos7840 since support for multiple read URBs was added back in 2011. Specifically, both port read URBs are now submitted on resume for open ports, but the context pointer of the second URB is left set to the core rather than mos7840 port structure. Fix this by implementing dedicated suspend and resume functions for mos7840. Tested with Delock 87414 USB 2.0 to 4x serial adapter. [ johan: analyse crash and rewrite commit message; set busy flag on resume; drop bulk-in check; drop unnecessary usb_kill_urb() ] |
| CVE-2024-42243 | In the Linux kernel, the following vulnerability has been resolved: mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray Patch series "mm/filemap: Limit page cache size to that supported by xarray", v2. Currently, xarray can't support arbitrary page cache size. More details can be found from the WARN_ON() statement in xas_split_alloc(). In our test whose code is attached below, we hit the WARN_ON() on ARM64 system where the base page size is 64KB and huge page size is 512MB. The issue was reported long time ago and some discussions on it can be found here [1]. [1] https://www.spinics.net/lists/linux-xfs/msg75404.html In order to fix the issue, we need to adjust MAX_PAGECACHE_ORDER to one supported by xarray and avoid PMD-sized page cache if needed. The code changes are suggested by David Hildenbrand. PATCH[1] adjusts MAX_PAGECACHE_ORDER to that supported by xarray PATCH[2-3] avoids PMD-sized page cache in the synchronous readahead path PATCH[4] avoids PMD-sized page cache for shmem files if needed Test program ============ # cat test.c #define _GNU_SOURCE #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <fcntl.h> #include <errno.h> #include <sys/syscall.h> #include <sys/mman.h> #define TEST_XFS_FILENAME "/tmp/data" #define TEST_SHMEM_FILENAME "/dev/shm/data" #define TEST_MEM_SIZE 0x20000000 int main(int argc, char **argv) { const char *filename; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret; if (pgsize != 0x10000) { fprintf(stderr, "64KB base page size is required\n"); return -EPERM; } system("echo force > /sys/kernel/mm/transparent_hugepage/shmem_enabled"); system("rm -fr /tmp/data"); system("rm -fr /dev/shm/data"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open xfs or shmem file */ filename = TEST_XFS_FILENAME; if (argc > 1 && !strcmp(argv[1], "shmem")) filename = TEST_SHMEM_FILENAME; fd = open(filename, O_CREAT | O_RDWR | O_TRUNC); if (fd < 0) { fprintf(stderr, "Unable to open <%s>\n", filename); return -EIO; } /* Extend file size */ ret = ftruncate(fd, TEST_MEM_SIZE); if (ret) { fprintf(stderr, "Error %d to ftruncate()\n", ret); goto cleanup; } /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (buf == (void *)-1) { fprintf(stderr, "Unable to mmap <%s>\n", filename); goto cleanup; } fprintf(stdout, "mapped buffer at 0x%p\n", buf); ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); if (ret) { fprintf(stderr, "Unable to madvise(MADV_HUGEPAGE)\n"); goto cleanup; } /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_WRITE); if (ret) { fprintf(stderr, "Error %d to madvise(MADV_POPULATE_WRITE)\n", ret); goto cleanup; } /* Punch the file to enforce xarray split */ ret = fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); if (ret) fprintf(stderr, "Error %d to fallocate()\n", ret); cleanup: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return 0; } # gcc test.c -o test # cat /proc/1/smaps | grep KernelPageSize | head -n 1 KernelPageSize: 64 kB # ./test shmem : ------------[ cut here ]------------ WARNING: CPU: 17 PID: 5253 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set nf_tables rfkill nfnetlink vfat fat virtio_balloon \ drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ virtio_net sha1_ce net_failover failover virtio_console virtio_blk \ dimlib virtio_mmio CPU: 17 PID: 5253 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TC ---truncated--- |
| CVE-2024-42242 | In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci: Fix max_seg_size for 64KiB PAGE_SIZE blk_queue_max_segment_size() ensured: if (max_size < PAGE_SIZE) max_size = PAGE_SIZE; whereas: blk_validate_limits() makes it an error: if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE)) return -EINVAL; The change from one to the other, exposed sdhci which was setting maximum segment size too low in some circumstances. Fix the maximum segment size when it is too low. |
| CVE-2024-42241 | In the Linux kernel, the following vulnerability has been resolved: mm/shmem: disable PMD-sized page cache if needed For shmem files, it's possible that PMD-sized page cache can't be supported by xarray. For example, 512MB page cache on ARM64 when the base page size is 64KB can't be supported by xarray. It leads to errors as the following messages indicate when this sort of xarray entry is split. WARNING: CPU: 34 PID: 7578 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: binfmt_misc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 \ nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject \ nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse xfs \ libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_net \ net_failover virtio_console virtio_blk failover dimlib virtio_mmio CPU: 34 PID: 7578 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff8000882af5f0 x29: ffff8000882af5f0 x28: ffff8000882af650 x27: ffff8000882af768 x26: 0000000000000cc0 x25: 000000000000000d x24: ffff00010625b858 x23: ffff8000882af650 x22: ffffffdfc0900000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0900000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000018000000000 x15: 52f8004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 52f8000000000000 x10: 52f8e1c0ffff6000 x9 : ffffbeb9619a681c x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff00010b02ddb0 x5 : ffffbeb96395e378 x4 : 0000000000000000 x3 : 0000000000000cc0 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 shmem_undo_range+0x2bc/0x6a8 shmem_fallocate+0x134/0x430 vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Fix it by disabling PMD-sized page cache when HPAGE_PMD_ORDER is larger than MAX_PAGECACHE_ORDER. As Matthew Wilcox pointed, the page cache in a shmem file isn't represented by a multi-index entry and doesn't have this limitation when the xarry entry is split until commit 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache"). |
| CVE-2024-42240 | In the Linux kernel, the following vulnerability has been resolved: x86/bhi: Avoid warning in #DB handler due to BHI mitigation When BHI mitigation is enabled, if SYSENTER is invoked with the TF flag set then entry_SYSENTER_compat() uses CLEAR_BRANCH_HISTORY and calls the clear_bhb_loop() before the TF flag is cleared. This causes the #DB handler (exc_debug_kernel()) to issue a warning because single-step is used outside the entry_SYSENTER_compat() function. To address this issue, entry_SYSENTER_compat() should use CLEAR_BRANCH_HISTORY after making sure the TF flag is cleared. The problem can be reproduced with the following sequence: $ cat sysenter_step.c int main() { asm("pushf; pop %ax; bts $8,%ax; push %ax; popf; sysenter"); } $ gcc -o sysenter_step sysenter_step.c $ ./sysenter_step Segmentation fault (core dumped) The program is expected to crash, and the #DB handler will issue a warning. Kernel log: WARNING: CPU: 27 PID: 7000 at arch/x86/kernel/traps.c:1009 exc_debug_kernel+0xd2/0x160 ... RIP: 0010:exc_debug_kernel+0xd2/0x160 ... Call Trace: <#DB> ? show_regs+0x68/0x80 ? __warn+0x8c/0x140 ? exc_debug_kernel+0xd2/0x160 ? report_bug+0x175/0x1a0 ? handle_bug+0x44/0x90 ? exc_invalid_op+0x1c/0x70 ? asm_exc_invalid_op+0x1f/0x30 ? exc_debug_kernel+0xd2/0x160 exc_debug+0x43/0x50 asm_exc_debug+0x1e/0x40 RIP: 0010:clear_bhb_loop+0x0/0xb0 ... </#DB> <TASK> ? entry_SYSENTER_compat_after_hwframe+0x6e/0x8d </TASK> [ bp: Massage commit message. ] |
| CVE-2024-42239 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fail bpf_timer_cancel when callback is being cancelled Given a schedule: timer1 cb timer2 cb bpf_timer_cancel(timer2); bpf_timer_cancel(timer1); Both bpf_timer_cancel calls would wait for the other callback to finish executing, introducing a lockup. Add an atomic_t count named 'cancelling' in bpf_hrtimer. This keeps track of all in-flight cancellation requests for a given BPF timer. Whenever cancelling a BPF timer, we must check if we have outstanding cancellation requests, and if so, we must fail the operation with an error (-EDEADLK) since cancellation is synchronous and waits for the callback to finish executing. This implies that we can enter a deadlock situation involving two or more timer callbacks executing in parallel and attempting to cancel one another. Note that we avoid incrementing the cancelling counter for the target timer (the one being cancelled) if bpf_timer_cancel is not invoked from a callback, to avoid spurious errors. The whole point of detecting cur->cancelling and returning -EDEADLK is to not enter a busy wait loop (which may or may not lead to a lockup). This does not apply in case the caller is in a non-callback context, the other side can continue to cancel as it sees fit without running into errors. Background on prior attempts: Earlier versions of this patch used a bool 'cancelling' bit and used the following pattern under timer->lock to publish cancellation status. lock(t->lock); t->cancelling = true; mb(); if (cur->cancelling) return -EDEADLK; unlock(t->lock); hrtimer_cancel(t->timer); t->cancelling = false; The store outside the critical section could overwrite a parallel requests t->cancelling assignment to true, to ensure the parallely executing callback observes its cancellation status. It would be necessary to clear this cancelling bit once hrtimer_cancel is done, but lack of serialization introduced races. Another option was explored where bpf_timer_start would clear the bit when (re)starting the timer under timer->lock. This would ensure serialized access to the cancelling bit, but may allow it to be cleared before in-flight hrtimer_cancel has finished executing, such that lockups can occur again. Thus, we choose an atomic counter to keep track of all outstanding cancellation requests and use it to prevent lockups in case callbacks attempt to cancel each other while executing in parallel. |
| CVE-2024-42238 | In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Return error if block header overflows file Return an error from cs_dsp_power_up() if a block header is longer than the amount of data left in the file. The previous code in cs_dsp_load() and cs_dsp_load_coeff() would loop while there was enough data left in the file for a valid region. This protected against overrunning the end of the file data, but it didn't abort the file processing with an error. |
| CVE-2024-42237 | In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Validate payload length before processing block Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load() to be done before the block is processed. The check that the length of a block payload does not exceed the number of remaining bytes in the firwmware file buffer was being done near the end of the loop iteration. However, some code before that check used the length field without validating it. |
| CVE-2024-42236 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: configfs: Prevent OOB read/write in usb_string_copy() Userspace provided string 's' could trivially have the length zero. Left unchecked this will firstly result in an OOB read in the form `if (str[0 - 1] == '\n') followed closely by an OOB write in the form `str[0 - 1] = '\0'`. There is already a validating check to catch strings that are too long. Let's supply an additional check for invalid strings that are too short. |
| CVE-2024-42235 | In the Linux kernel, the following vulnerability has been resolved: s390/mm: Add NULL pointer check to crst_table_free() base_crst_free() crst_table_free() used to work with NULL pointers before the conversion to ptdescs. Since crst_table_free() can be called with a NULL pointer (error handling in crst_table_upgrade() add an explicit check. Also add the same check to base_crst_free() for consistency reasons. In real life this should not happen, since order two GFP_KERNEL allocations will not fail, unless FAIL_PAGE_ALLOC is enabled and used. |
| CVE-2024-42234 | In the Linux kernel, the following vulnerability has been resolved: mm: fix crashes from deferred split racing folio migration Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on flags when freeing, yet the flags shown are not bad: PG_locked had been set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN symptoms implying double free by deferred split and large folio migration. 6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration") was right to fix the memcg-dependent locking broken in 85ce2c517ade ("memcontrol: only transfer the memcg data for migration"), but missed a subtlety of deferred_split_scan(): it moves folios to its own local list to work on them without split_queue_lock, during which time folio->_deferred_list is not empty, but even the "right" lock does nothing to secure the folio and the list it is on. Fortunately, deferred_split_scan() is careful to use folio_try_get(): so folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable() while the old folio's reference count is temporarily frozen to 0 - adding such a freeze in the !mapping case too (originally, folio lock and unmapping and no swap cache left an anon folio unreachable, so no freezing was needed there: but the deferred split queue offers a way to reach it). |
| CVE-2024-42233 | In the Linux kernel, the following vulnerability has been resolved: filemap: replace pte_offset_map() with pte_offset_map_nolock() The vmf->ptl in filemap_fault_recheck_pte_none() is still set from handle_pte_fault(). But at the same time, we did a pte_unmap(vmf->pte). After a pte_unmap(vmf->pte) unmap and rcu_read_unlock(), the page table may be racily changed and vmf->ptl maybe fails to protect the actual page table. Fix this by replacing pte_offset_map() with pte_offset_map_nolock(). As David said, the PTL pointer might be stale so if we continue to use it infilemap_fault_recheck_pte_none(), it might trigger UAF. Also, if the PTL fails, the issue fixed by commit 58f327f2ce80 ("filemap: avoid unnecessary major faults in filemap_fault()") might reappear. |
| CVE-2024-42232 | In the Linux kernel, the following vulnerability has been resolved: libceph: fix race between delayed_work() and ceph_monc_stop() The way the delayed work is handled in ceph_monc_stop() is prone to races with mon_fault() and possibly also finish_hunting(). Both of these can requeue the delayed work which wouldn't be canceled by any of the following code in case that happens after cancel_delayed_work_sync() runs -- __close_session() doesn't mess with the delayed work in order to avoid interfering with the hunting interval logic. This part was missed in commit b5d91704f53e ("libceph: behave in mon_fault() if cur_mon < 0") and use-after-free can still ensue on monc and objects that hang off of it, with monc->auth and monc->monmap being particularly susceptible to quickly being reused. To fix this: - clear monc->cur_mon and monc->hunting as part of closing the session in ceph_monc_stop() - bail from delayed_work() if monc->cur_mon is cleared, similar to how it's done in mon_fault() and finish_hunting() (based on monc->hunting) - call cancel_delayed_work_sync() after the session is closed |
| CVE-2024-42231 | In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix calc_available_free_space() for zoned mode calc_available_free_space() returns the total size of metadata (or system) block groups, which can be allocated from unallocated disk space. The logic is wrong on zoned mode in two places. First, the calculation of data_chunk_size is wrong. We always allocate one zone as one chunk, and no partial allocation of a zone. So, we should use zone_size (= data_sinfo->chunk_size) as it is. Second, the result "avail" may not be zone aligned. Since we always allocate one zone as one chunk on zoned mode, returning non-zone size aligned bytes will result in less pressure on the async metadata reclaim process. This is serious for the nearly full state with a large zone size device. Allowing over-commit too much will result in less async reclaim work and end up in ENOSPC. We can align down to the zone size to avoid that. |
| CVE-2024-42230 | In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Fix scv instruction crash with kexec kexec on pseries disables AIL (reloc_on_exc), required for scv instruction support, before other CPUs have been shut down. This means they can execute scv instructions after AIL is disabled, which causes an interrupt at an unexpected entry location that crashes the kernel. Change the kexec sequence to disable AIL after other CPUs have been brought down. As a refresher, the real-mode scv interrupt vector is 0x17000, and the fixed-location head code probably couldn't easily deal with implementing such high addresses so it was just decided not to support that interrupt at all. |
| CVE-2024-42229 | In the Linux kernel, the following vulnerability has been resolved: crypto: aead,cipher - zeroize key buffer after use I.G 9.7.B for FIPS 140-3 specifies that variables temporarily holding cryptographic information should be zeroized once they are no longer needed. Accomplish this by using kfree_sensitive for buffers that previously held the private key. |
| CVE-2024-42228 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Using uninitialized value *size when calling amdgpu_vce_cs_reloc Initialize the size before calling amdgpu_vce_cs_reloc, such as case 0x03000001. V2: To really improve the handling we would actually need to have a separate value of 0xffffffff.(Christian) |
| CVE-2024-42227 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix overlapping copy within dml_core_mode_programming [WHY] &mode_lib->mp.Watermark and &locals->Watermark are the same address. memcpy may lead to unexpected behavior. [HOW] memmove should be used. |
| CVE-2024-42225 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: replace skb_put with skb_put_zero Avoid potentially reusing uninitialized data |
| CVE-2024-42224 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: Correct check for empty list Since commit a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") mv88e6xxx_default_mdio_bus() has checked that the return value of list_first_entry() is non-NULL. This appears to be intended to guard against the list chip->mdios being empty. However, it is not the correct check as the implementation of list_first_entry is not designed to return NULL for empty lists. Instead, use list_first_entry_or_null() which does return NULL if the list is empty. Flagged by Smatch. Compile tested only. |
| CVE-2024-42223 | In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: tda10048: Fix integer overflow state->xtal_hz can be up to 16M, so it can overflow a 32 bit integer when multiplied by pll_mfactor. Create a new 64 bit variable to hold the calculations. |
| CVE-2024-42162 | In the Linux kernel, the following vulnerability has been resolved: gve: Account for stopped queues when reading NIC stats We now account for the fact that the NIC might send us stats for a subset of queues. Without this change, gve_get_ethtool_stats might make an invalid access on the priv->stats_report->stats array. |
| CVE-2024-42161 | In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid uninitialized value in BPF_CORE_READ_BITFIELD [Changes from V1: - Use a default branch in the switch statement to initialize `val'.] GCC warns that `val' may be used uninitialized in the BPF_CRE_READ_BITFIELD macro, defined in bpf_core_read.h as: [...] unsigned long long val; \ [...] \ switch (__CORE_RELO(s, field, BYTE_SIZE)) { \ case 1: val = *(const unsigned char *)p; break; \ case 2: val = *(const unsigned short *)p; break; \ case 4: val = *(const unsigned int *)p; break; \ case 8: val = *(const unsigned long long *)p; break; \ } \ [...] val; \ } \ This patch adds a default entry in the switch statement that sets `val' to zero in order to avoid the warning, and random values to be used in case __builtin_preserve_field_info returns unexpected values for BPF_FIELD_BYTE_SIZE. Tested in bpf-next master. No regressions. |
| CVE-2024-42160 | In the Linux kernel, the following vulnerability has been resolved: f2fs: check validation of fault attrs in f2fs_build_fault_attr() - It missed to check validation of fault attrs in parse_options(), let's fix to add check condition in f2fs_build_fault_attr(). - Use f2fs_build_fault_attr() in __sbi_store() to clean up code. |
| CVE-2024-42159 | In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Sanitise num_phys Information is stored in mr_sas_port->phy_mask, values larger then size of this field shouldn't be allowed. |
| CVE-2024-42158 | In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Use kfree_sensitive() to fix Coccinelle warnings Replace memzero_explicit() and kfree() with kfree_sensitive() to fix warnings reported by Coccinelle: WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1506) WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1643) WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1770) |
| CVE-2024-42157 | In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Wipe sensitive data on failure Wipe sensitive data from stack also if the copy_to_user() fails. |
| CVE-2024-42156 | In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Wipe copies of clear-key structures on failure Wipe all sensitive data from stack for all IOCTLs, which convert a clear-key into a protected- or secure-key. |
| CVE-2024-42155 | In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Wipe copies of protected- and secure-keys Although the clear-key of neither protected- nor secure-keys is accessible, this key material should only be visible to the calling process. So wipe all copies of protected- or secure-keys from stack, even in case of an error. |
| CVE-2024-42154 | In the Linux kernel, the following vulnerability has been resolved: tcp_metrics: validate source addr length I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4 is at least 4 bytes long, and the policy doesn't have an entry for this attribute at all (neither does it for IPv6 but v6 is manually validated). |
| CVE-2024-42153 | In the Linux kernel, the following vulnerability has been resolved: i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr When del_timer_sync() is called in an interrupt context it throws a warning because of potential deadlock. The timer is used only to exit from wait_for_completion() after a timeout so replacing the call with wait_for_completion_timeout() allows to remove the problematic timer and its related functions altogether. |
| CVE-2024-42152 | In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a possible leak when destroy a ctrl during qp establishment In nvmet_sq_destroy we capture sq->ctrl early and if it is non-NULL we know that a ctrl was allocated (in the admin connect request handler) and we need to release pending AERs, clear ctrl->sqs and sq->ctrl (for nvme-loop primarily), and drop the final reference on the ctrl. However, a small window is possible where nvmet_sq_destroy starts (as a result of the client giving up and disconnecting) concurrently with the nvme admin connect cmd (which may be in an early stage). But *before* kill_and_confirm of sq->ref (i.e. the admin connect managed to get an sq live reference). In this case, sq->ctrl was allocated however after it was captured in a local variable in nvmet_sq_destroy. This prevented the final reference drop on the ctrl. Solve this by re-capturing the sq->ctrl after all inflight request has completed, where for sure sq->ctrl reference is final, and move forward based on that. This issue was observed in an environment with many hosts connecting multiple ctrls simoutanuosly, creating a delay in allocating a ctrl leading up to this race window. |
| CVE-2024-42151 | In the Linux kernel, the following vulnerability has been resolved: bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable Test case dummy_st_ops/dummy_init_ret_value passes NULL as the first parameter of the test_1() function. Mark this parameter as nullable to make verifier aware of such possibility. Otherwise, NULL check in the test_1() code: SEC("struct_ops/test_1") int BPF_PROG(test_1, struct bpf_dummy_ops_state *state) { if (!state) return ...; ... access state ... } Might be removed by verifier, thus triggering NULL pointer dereference under certain conditions. |
| CVE-2024-42150 | In the Linux kernel, the following vulnerability has been resolved: net: txgbe: remove separate irq request for MSI and INTx When using MSI or INTx interrupts, request_irq() for pdev->irq will conflict with request_threaded_irq() for txgbe->misc.irq, to cause system crash. So remove txgbe_request_irq() for MSI/INTx case, and rename txgbe_request_msix_irqs() since it only request for queue irqs. Add wx->misc_irq_domain to determine whether the driver creates an IRQ domain and threaded request the IRQs. |
| CVE-2024-42149 | In the Linux kernel, the following vulnerability has been resolved: fs: don't misleadingly warn during thaw operations The block device may have been frozen before it was claimed by a filesystem. Concurrently another process might try to mount that frozen block device and has temporarily claimed the block device for that purpose causing a concurrent fs_bdev_thaw() to end up here. The mounter is already about to abort mounting because they still saw an elevanted bdev->bd_fsfreeze_count so get_bdev_super() will return NULL in that case. For example, P1 calls dm_suspend() which calls into bdev_freeze() before the block device has been claimed by the filesystem. This brings bdev->bd_fsfreeze_count to 1 and no call into fs_bdev_freeze() is required. Now P2 tries to mount that frozen block device. It claims it and checks bdev->bd_fsfreeze_count. As it's elevated it aborts mounting. In the meantime P3 called dm_resume(). P3 sees that the block device is already claimed by a filesystem and calls into fs_bdev_thaw(). P3 takes a passive reference and realizes that the filesystem isn't ready yet. P3 puts itself to sleep to wait for the filesystem to become ready. P2 now puts the last active reference to the filesystem and marks it as dying. P3 gets woken, sees that the filesystem is dying and get_bdev_super() fails. |
| CVE-2024-42148 | In the Linux kernel, the following vulnerability has been resolved: bnx2x: Fix multiple UBSAN array-index-out-of-bounds Fix UBSAN warnings that occur when using a system with 32 physical cpu cores or more, or when the user defines a number of Ethernet queues greater than or equal to FP_SB_MAX_E1x using the num_queues module parameter. Currently there is a read/write out of bounds that occurs on the array "struct stats_query_entry query" present inside the "bnx2x_fw_stats_req" struct in "drivers/net/ethernet/broadcom/bnx2x/bnx2x.h". Looking at the definition of the "struct stats_query_entry query" array: struct stats_query_entry query[FP_SB_MAX_E1x+ BNX2X_FIRST_QUEUE_QUERY_IDX]; FP_SB_MAX_E1x is defined as the maximum number of fast path interrupts and has a value of 16, while BNX2X_FIRST_QUEUE_QUERY_IDX has a value of 3 meaning the array has a total size of 19. Since accesses to "struct stats_query_entry query" are offset-ted by BNX2X_FIRST_QUEUE_QUERY_IDX, that means that the total number of Ethernet queues should not exceed FP_SB_MAX_E1x (16). However one of these queues is reserved for FCOE and thus the number of Ethernet queues should be set to [FP_SB_MAX_E1x -1] (15) if FCOE is enabled or [FP_SB_MAX_E1x] (16) if it is not. This is also described in a comment in the source code in drivers/net/ethernet/broadcom/bnx2x/bnx2x.h just above the Macro definition of FP_SB_MAX_E1x. Below is the part of this explanation that it important for this patch /* * The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is * control by the number of fast-path status blocks supported by the * device (HW/FW). Each fast-path status block (FP-SB) aka non-default * status block represents an independent interrupts context that can * serve a regular L2 networking queue. However special L2 queues such * as the FCoE queue do not require a FP-SB and other components like * the CNIC may consume FP-SB reducing the number of possible L2 queues * * If the maximum number of FP-SB available is X then: * a. If CNIC is supported it consumes 1 FP-SB thus the max number of * regular L2 queues is Y=X-1 * b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor) * c. If the FCoE L2 queue is supported the actual number of L2 queues * is Y+1 * d. The number of irqs (MSIX vectors) is either Y+1 (one extra for * slow-path interrupts) or Y+2 if CNIC is supported (one additional * FP interrupt context for the CNIC). * e. The number of HW context (CID count) is always X or X+1 if FCoE * L2 queue is supported. The cid for the FCoE L2 queue is always X. */ However this driver also supports NICs that use the E2 controller which can handle more queues due to having more FP-SB represented by FP_SB_MAX_E2. Looking at the commits when the E2 support was added, it was originally using the E1x parameters: commit f2e0899f0f27 ("bnx2x: Add 57712 support"). Back then FP_SB_MAX_E2 was set to 16 the same as E1x. However the driver was later updated to take full advantage of the E2 instead of having it be limited to the capabilities of the E1x. But as far as we can tell, the array "stats_query_entry query" was still limited to using the FP-SB available to the E1x cards as part of an oversignt when the driver was updated to take full advantage of the E2, and now with the driver being aware of the greater queue size supported by E2 NICs, it causes the UBSAN warnings seen in the stack traces below. This patch increases the size of the "stats_query_entry query" array by replacing FP_SB_MAX_E1x with FP_SB_MAX_E2 to be large enough to handle both types of NICs. Stack traces: UBSAN: array-index-out-of-bounds in drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11 index 20 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 ---truncated--- |
| CVE-2024-42147 | In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/debugfs - Fix debugfs uninit process issue During the zip probe process, the debugfs failure does not stop the probe. When debugfs initialization fails, jumping to the error branch will also release regs, in addition to its own rollback operation. As a result, it may be released repeatedly during the regs uninit process. Therefore, the null check needs to be added to the regs uninit process. |
| CVE-2024-42146 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Add outer runtime_pm protection to xe_live_ktest@xe_dma_buf Any kunit doing any memory access should get their own runtime_pm outer references since they don't use the standard driver API entries. In special this dma_buf from the same driver. Found by pre-merge CI on adding WARN calls for unprotected inner callers: <6> [318.639739] # xe_dma_buf_kunit: running xe_test_dmabuf_import_same_driver <4> [318.639957] ------------[ cut here ]------------ <4> [318.639967] xe 0000:4d:00.0: Missing outer runtime PM protection <4> [318.640049] WARNING: CPU: 117 PID: 3832 at drivers/gpu/drm/xe/xe_pm.c:533 xe_pm_runtime_get_noresume+0x48/0x60 [xe] |
| CVE-2024-42145 | In the Linux kernel, the following vulnerability has been resolved: IB/core: Implement a limit on UMAD receive List The existing behavior of ib_umad, which maintains received MAD packets in an unbounded list, poses a risk of uncontrolled growth. As user-space applications extract packets from this list, the rate of extraction may not match the rate of incoming packets, leading to potential list overflow. To address this, we introduce a limit to the size of the list. After considering typical scenarios, such as OpenSM processing, which can handle approximately 100k packets per second, and the 1-second retry timeout for most packets, we set the list size limit to 200k. Packets received beyond this limit are dropped, assuming they are likely timed out by the time they are handled by user-space. Notably, packets queued on the receive list due to reasons like timed-out sends are preserved even when the list is full. |
| CVE-2024-42144 | In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_data Verify that lvts_data is not NULL before using it. |
| CVE-2024-42142 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-switch, Create ingress ACL when needed Currently, ingress acl is used for three features. It is created only when vport metadata match and prio tag are enabled. But active-backup lag mode also uses it. It is independent of vport metadata match and prio tag. And vport metadata match can be disabled using the following devlink command: # devlink dev param set pci/0000:08:00.0 name esw_port_metadata \ value false cmode runtime If ingress acl is not created, will hit panic when creating drop rule for active-backup lag mode. If always create it, there will be about 5% performance degradation. Fix it by creating ingress acl when needed. If esw_port_metadata is true, ingress acl exists, then create drop rule using existing ingress acl. If esw_port_metadata is false, create ingress acl and then create drop rule. |
| CVE-2024-42141 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Check socket flag instead of hcon This fixes the following Smatch static checker warning: net/bluetooth/iso.c:1364 iso_sock_recvmsg() error: we previously assumed 'pi->conn->hcon' could be null (line 1359) net/bluetooth/iso.c 1347 static int iso_sock_recvmsg(struct socket *sock, struct msghdr *msg, 1348 size_t len, int flags) 1349 { 1350 struct sock *sk = sock->sk; 1351 struct iso_pinfo *pi = iso_pi(sk); 1352 1353 BT_DBG("sk %p", sk); 1354 1355 if (test_and_clear_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags)) { 1356 lock_sock(sk); 1357 switch (sk->sk_state) { 1358 case BT_CONNECT2: 1359 if (pi->conn->hcon && ^^^^^^^^^^^^^^ If ->hcon is NULL 1360 test_bit(HCI_CONN_PA_SYNC, &pi->conn->hcon->flags)) { 1361 iso_conn_big_sync(sk); 1362 sk->sk_state = BT_LISTEN; 1363 } else { --> 1364 iso_conn_defer_accept(pi->conn->hcon); ^^^^^^^^^^^^^^ then we're toast 1365 sk->sk_state = BT_CONFIG; 1366 } 1367 release_sock(sk); 1368 return 0; 1369 case BT_CONNECTED: 1370 if (test_bit(BT_SK_PA_SYNC, |
| CVE-2024-42140 | In the Linux kernel, the following vulnerability has been resolved: riscv: kexec: Avoid deadlock in kexec crash path If the kexec crash code is called in the interrupt context, the machine_kexec_mask_interrupts() function will trigger a deadlock while trying to acquire the irqdesc spinlock and then deactivate irqchip in irq_set_irqchip_state() function. Unlike arm64, riscv only requires irq_eoi handler to complete EOI and keeping irq_set_irqchip_state() will only leave this possible deadlock without any use. So we simply remove it. |
| CVE-2024-42139 | In the Linux kernel, the following vulnerability has been resolved: ice: Fix improper extts handling Extts events are disabled and enabled by the application ts2phc. However, in case where the driver is removed when the application is running, a specific extts event remains enabled and can cause a kernel crash. As a side effect, when the driver is reloaded and application is started again, remaining extts event for the channel from a previous run will keep firing and the message "extts on unexpected channel" might be printed to the user. To avoid that, extts events shall be disabled when PTP is released. |
| CVE-2024-42138 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file In case of invalid INI file mlxsw_linecard_types_init() deallocates memory but doesn't reset pointer to NULL and returns 0. In case of any error occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init() calls mlxsw_linecard_types_fini() which performs memory deallocation again. Add pointer reset to NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-42137 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: Fix BT enable failure again for QCA6390 after warm reboot Commit 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed serdev") will cause below regression issue: BT can't be enabled after below steps: cold boot -> enable BT -> disable BT -> warm reboot -> BT enable failure if property enable-gpios is not configured within DT|ACPI for QCA6390. The commit is to fix a use-after-free issue within qca_serdev_shutdown() by adding condition to avoid the serdev is flushed or wrote after closed but also introduces this regression issue regarding above steps since the VSC is not sent to reset controller during warm reboot. Fixed by sending the VSC to reset controller within qca_serdev_shutdown() once BT was ever enabled, and the use-after-free issue is also fixed by this change since the serdev is still opened before it is flushed or wrote. Verified by the reported machine Dell XPS 13 9310 laptop over below two kernel commits: commit e00fc2700a3f ("Bluetooth: btusb: Fix triggering coredump implementation for QCA") of bluetooth-next tree. commit b23d98d46d28 ("Bluetooth: btusb: Fix triggering coredump implementation for QCA") of linus mainline tree. |
| CVE-2024-42136 | In the Linux kernel, the following vulnerability has been resolved: cdrom: rearrange last_media_change check to avoid unintentional overflow When running syzkaller with the newly reintroduced signed integer wrap sanitizer we encounter this splat: [ 366.015950] UBSAN: signed-integer-overflow in ../drivers/cdrom/cdrom.c:2361:33 [ 366.021089] -9223372036854775808 - 346321 cannot be represented in type '__s64' (aka 'long long') [ 366.025894] program syz-executor.4 is using a deprecated SCSI ioctl, please convert it to SG_IO [ 366.027502] CPU: 5 PID: 28472 Comm: syz-executor.7 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1 [ 366.027512] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 366.027518] Call Trace: [ 366.027523] <TASK> [ 366.027533] dump_stack_lvl+0x93/0xd0 [ 366.027899] handle_overflow+0x171/0x1b0 [ 366.038787] ata1.00: invalid multi_count 32 ignored [ 366.043924] cdrom_ioctl+0x2c3f/0x2d10 [ 366.063932] ? __pm_runtime_resume+0xe6/0x130 [ 366.071923] sr_block_ioctl+0x15d/0x1d0 [ 366.074624] ? __pfx_sr_block_ioctl+0x10/0x10 [ 366.077642] blkdev_ioctl+0x419/0x500 [ 366.080231] ? __pfx_blkdev_ioctl+0x10/0x10 ... Historically, the signed integer overflow sanitizer did not work in the kernel due to its interaction with `-fwrapv` but this has since been changed [1] in the newest version of Clang. It was re-enabled in the kernel with Commit 557f8c582a9ba8ab ("ubsan: Reintroduce signed overflow sanitizer"). Let's rearrange the check to not perform any arithmetic, thus not tripping the sanitizer. |
| CVE-2024-42135 | In the Linux kernel, the following vulnerability has been resolved: vhost_task: Handle SIGKILL by flushing work and exiting Instead of lingering until the device is closed, this has us handle SIGKILL by: 1. marking the worker as killed so we no longer try to use it with new virtqueues and new flush operations. 2. setting the virtqueue to worker mapping so no new works are queued. 3. running all the exiting works. |
| CVE-2024-42134 | In the Linux kernel, the following vulnerability has been resolved: virtio-pci: Check if is_avq is NULL [bug] In the virtio_pci_common.c function vp_del_vqs, vp_dev->is_avq is involved to determine whether it is admin virtqueue, but this function vp_dev->is_avq may be empty. For installations, virtio_pci_legacy does not assign a value to vp_dev->is_avq. [fix] Check whether it is vp_dev->is_avq before use. [test] Test with virsh Attach device Before this patch, the following command would crash the guest system After applying the patch, everything seems to be working fine. |
| CVE-2024-42133 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Ignore too large handle values in BIG hci_le_big_sync_established_evt is necessary to filter out cases where the handle value is belonging to ida id range, otherwise ida will be erroneously released in hci_conn_cleanup. |
| CVE-2024-42132 | In the Linux kernel, the following vulnerability has been resolved: bluetooth/hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX Syzbot hit warning in hci_conn_del() caused by freeing handle that was not allocated using ida allocator. This is caused by handle bigger than HCI_CONN_HANDLE_MAX passed by hci_le_big_sync_established_evt(), which makes code think it's unset connection. Add same check for handle upper bound as in hci_conn_set_handle() to prevent warning. |
| CVE-2024-42131 | In the Linux kernel, the following vulnerability has been resolved: mm: avoid overflows in dirty throttling logic The dirty throttling logic is interspersed with assumptions that dirty limits in PAGE_SIZE units fit into 32-bit (so that various multiplications fit into 64-bits). If limits end up being larger, we will hit overflows, possible divisions by 0 etc. Fix these problems by never allowing so large dirty limits as they have dubious practical value anyway. For dirty_bytes / dirty_background_bytes interfaces we can just refuse to set so large limits. For dirty_ratio / dirty_background_ratio it isn't so simple as the dirty limit is computed from the amount of available memory which can change due to memory hotplug etc. So when converting dirty limits from ratios to numbers of pages, we just don't allow the result to exceed UINT_MAX. This is root-only triggerable problem which occurs when the operator sets dirty limits to >16 TB. |
| CVE-2024-42130 | In the Linux kernel, the following vulnerability has been resolved: nfc/nci: Add the inconsistency check between the input data length and count write$nci(r0, &(0x7f0000000740)=ANY=[@ANYBLOB="610501"], 0xf) Syzbot constructed a write() call with a data length of 3 bytes but a count value of 15, which passed too little data to meet the basic requirements of the function nci_rf_intf_activated_ntf_packet(). Therefore, increasing the comparison between data length and count value to avoid problems caused by inconsistent data length and count. |
| CVE-2024-42129 | In the Linux kernel, the following vulnerability has been resolved: leds: mlxreg: Use devm_mutex_init() for mutex initialization In this driver LEDs are registered using devm_led_classdev_register() so they are automatically unregistered after module's remove() is done. led_classdev_unregister() calls module's led_set_brightness() to turn off the LEDs and that callback uses mutex which was destroyed already in module's remove() so use devm API instead. |
| CVE-2024-42128 | In the Linux kernel, the following vulnerability has been resolved: leds: an30259a: Use devm_mutex_init() for mutex initialization In this driver LEDs are registered using devm_led_classdev_register() so they are automatically unregistered after module's remove() is done. led_classdev_unregister() calls module's led_set_brightness() to turn off the LEDs and that callback uses mutex which was destroyed already in module's remove() so use devm API instead. |
| CVE-2024-42127 | In the Linux kernel, the following vulnerability has been resolved: drm/lima: fix shared irq handling on driver remove lima uses a shared interrupt, so the interrupt handlers must be prepared to be called at any time. At driver removal time, the clocks are disabled early and the interrupts stay registered until the very end of the remove process due to the devm usage. This is potentially a bug as the interrupts access device registers which assumes clocks are enabled. A crash can be triggered by removing the driver in a kernel with CONFIG_DEBUG_SHIRQ enabled. This patch frees the interrupts at each lima device finishing callback so that the handlers are already unregistered by the time we fully disable clocks. |
| CVE-2024-42126 | In the Linux kernel, the following vulnerability has been resolved: powerpc: Avoid nmi_enter/nmi_exit in real mode interrupt. nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel crash when invoked during real mode interrupt handling (e.g. early HMI/MCE interrupt handler) if percpu allocation comes from vmalloc area. Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI() wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when percpu allocation is from the embedded first chunk. However with CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu allocation can come from the vmalloc area. With kernel command line "percpu_alloc=page" we can force percpu allocation to come from vmalloc area and can see kernel crash in machine_check_early: [ 1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110 [ 1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0 [ 1.215719] --- interrupt: 200 [ 1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable) [ 1.215722] [c000000fffd731b0] [0000000000000000] 0x0 [ 1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8 Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu first chunk is not embedded. |
| CVE-2024-42125 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fw: scan offload prohibit all 6 GHz channel if no 6 GHz sband We have some policy via BIOS to block uses of 6 GHz. In this case, 6 GHz sband will be NULL even if it is WiFi 7 chip. So, add NULL handling here to avoid crash. |
| CVE-2024-42124 | In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Make qedf_execute_tmf() non-preemptible Stop calling smp_processor_id() from preemptible code in qedf_execute_tmf90. This results in BUG_ON() when running an RT kernel. [ 659.343280] BUG: using smp_processor_id() in preemptible [00000000] code: sg_reset/3646 [ 659.343282] caller is qedf_execute_tmf+0x8b/0x360 [qedf] |
| CVE-2024-42123 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix double free err_addr pointer warnings In amdgpu_umc_bad_page_polling_timeout, the amdgpu_umc_handle_bad_pages will be run many times so that double free err_addr in some special case. So set the err_addr to NULL to avoid the warnings. |
| CVE-2024-42122 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL pointer check for kzalloc [Why & How] Check return pointer of kzalloc before using it. |
| CVE-2024-42121 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check index msg_id before read or write [WHAT] msg_id is used as an array index and it cannot be a negative value, and therefore cannot be equal to MOD_HDCP_MESSAGE_ID_INVALID (-1). [HOW] Check whether msg_id is valid before reading and setting. This fixes 4 OVERRUN issues reported by Coverity. |
| CVE-2024-42120 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check pipe offset before setting vblank pipe_ctx has a size of MAX_PIPES so checking its index before accessing the array. This fixes an OVERRUN issue reported by Coverity. |
| CVE-2024-42119 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip finding free audio for unknown engine_id [WHY] ENGINE_ID_UNKNOWN = -1 and can not be used as an array index. Plus, it also means it is uninitialized and does not need free audio. [HOW] Skip and return NULL. This fixes 2 OVERRUN issues reported by Coverity. |
| CVE-2024-42118 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Do not return negative stream id for array [WHY] resource_stream_to_stream_idx returns an array index and it return -1 when not found; however, -1 is not a valid array index number. [HOW] When this happens, call ASSERT(), and return a zero instead. This fixes an OVERRUN and an NEGATIVE_RETURNS issues reported by Coverity. |
| CVE-2024-42117 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: ASSERT when failing to find index by plane/stream id [WHY] find_disp_cfg_idx_by_plane_id and find_disp_cfg_idx_by_stream_id returns an array index and they return -1 when not found; however, -1 is not a valid index number. [HOW] When this happens, call ASSERT(), and return a positive number (which is fewer than callers' array size) instead. This fixes 4 OVERRUN and 2 NEGATIVE_RETURNS issues reported by Coverity. |
| CVE-2024-42116 | In the Linux kernel, the following vulnerability has been resolved: igc: fix a log entry using uninitialized netdev During successful probe, igc logs this: [ 5.133667] igc 0000:01:00.0 (unnamed net_device) (uninitialized): PHC added ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The reason is that igc_ptp_init() is called very early, even before register_netdev() has been called. So the netdev_info() call works on a partially uninitialized netdev. Fix this by calling igc_ptp_init() after register_netdev(), right after the media autosense check, just as in igb. Add a comment, just as in igb. Now the log message is fine: [ 5.200987] igc 0000:01:00.0 eth0: PHC added |
| CVE-2024-42115 | In the Linux kernel, the following vulnerability has been resolved: jffs2: Fix potential illegal address access in jffs2_free_inode During the stress testing of the jffs2 file system,the following abnormal printouts were found: [ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948 [ 2430.649622] Mem abort info: [ 2430.649829] ESR = 0x96000004 [ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits [ 2430.650564] SET = 0, FnV = 0 [ 2430.650795] EA = 0, S1PTW = 0 [ 2430.651032] FSC = 0x04: level 0 translation fault [ 2430.651446] Data abort info: [ 2430.651683] ISV = 0, ISS = 0x00000004 [ 2430.652001] CM = 0, WnR = 0 [ 2430.652558] [0069696969696948] address between user and kernel address ranges [ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 #33 [ 2430.655008] Hardware name: linux,dummy-virt (DT) [ 2430.655517] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2430.656142] pc : kfree+0x78/0x348 [ 2430.656630] lr : jffs2_free_inode+0x24/0x48 [ 2430.657051] sp : ffff800009eebd10 [ 2430.657355] x29: ffff800009eebd10 x28: 0000000000000001 x27: 0000000000000000 [ 2430.658327] x26: ffff000038f09d80 x25: 0080000000000000 x24: ffff800009d38000 [ 2430.658919] x23: 5a5a5a5a5a5a5a5a x22: ffff000038f09d80 x21: ffff8000084f0d14 [ 2430.659434] x20: ffff0000bf9a6ac0 x19: 0169696969696940 x18: 0000000000000000 [ 2430.659969] x17: ffff8000b6506000 x16: ffff800009eec000 x15: 0000000000004000 [ 2430.660637] x14: 0000000000000000 x13: 00000001000820a1 x12: 00000000000d1b19 [ 2430.661345] x11: 0004000800000000 x10: 0000000000000001 x9 : ffff8000084f0d14 [ 2430.662025] x8 : ffff0000bf9a6b40 x7 : ffff0000bf9a6b48 x6 : 0000000003470302 [ 2430.662695] x5 : ffff00002e41dcc0 x4 : ffff0000bf9aa3b0 x3 : 0000000003470342 [ 2430.663486] x2 : 0000000000000000 x1 : ffff8000084f0d14 x0 : fffffc0000000000 [ 2430.664217] Call trace: [ 2430.664528] kfree+0x78/0x348 [ 2430.664855] jffs2_free_inode+0x24/0x48 [ 2430.665233] i_callback+0x24/0x50 [ 2430.665528] rcu_do_batch+0x1ac/0x448 [ 2430.665892] rcu_core+0x28c/0x3c8 [ 2430.666151] rcu_core_si+0x18/0x28 [ 2430.666473] __do_softirq+0x138/0x3cc [ 2430.666781] irq_exit+0xf0/0x110 [ 2430.667065] handle_domain_irq+0x6c/0x98 [ 2430.667447] gic_handle_irq+0xac/0xe8 [ 2430.667739] call_on_irq_stack+0x28/0x54 The parameter passed to kfree was 5a5a5a5a, which corresponds to the target field of the jffs_inode_info structure. It was found that all variables in the jffs_inode_info structure were 5a5a5a5a, except for the first member sem. It is suspected that these variables are not initialized because they were set to 5a5a5a5a during memory testing, which is meant to detect uninitialized memory.The sem variable is initialized in the function jffs2_i_init_once, while other members are initialized in the function jffs2_init_inode_info. The function jffs2_init_inode_info is called after iget_locked, but in the iget_locked function, the destroy_inode process is triggered, which releases the inode and consequently, the target member of the inode is not initialized.In concurrent high pressure scenarios, iget_locked may enter the destroy_inode branch as described in the code. Since the destroy_inode functionality of jffs2 only releases the target, the fix method is to set target to NULL in jffs2_i_init_once. |
| CVE-2024-42114 | In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM values syzbot is able to trigger softlockups, setting NL80211_ATTR_TXQ_QUANTUM to 2^31. We had a similar issue in sch_fq, fixed with commit d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM") watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:0:24] Modules linked in: irq event stamp: 131135 hardirqs last enabled at (131134): [<ffff80008ae8778c>] __exit_to_kernel_mode arch/arm64/kernel/entry-common.c:85 [inline] hardirqs last enabled at (131134): [<ffff80008ae8778c>] exit_to_kernel_mode+0xdc/0x10c arch/arm64/kernel/entry-common.c:95 hardirqs last disabled at (131135): [<ffff80008ae85378>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (131135): [<ffff80008ae85378>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_hh_init net/core/neighbour.c:1538 [inline] softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_resolve_output+0x268/0x658 net/core/neighbour.c:1553 softirqs last disabled at (125896): [<ffff80008904166c>] local_bh_disable+0x10/0x34 include/linux/bottom_half.h:19 CPU: 1 PID: 24 Comm: kworker/1:0 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: mld mld_ifc_work pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __list_del include/linux/list.h:195 [inline] pc : __list_del_entry include/linux/list.h:218 [inline] pc : list_move_tail include/linux/list.h:310 [inline] pc : fq_tin_dequeue include/net/fq_impl.h:112 [inline] pc : ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 lr : __list_del_entry include/linux/list.h:218 [inline] lr : list_move_tail include/linux/list.h:310 [inline] lr : fq_tin_dequeue include/net/fq_impl.h:112 [inline] lr : ieee80211_tx_dequeue+0x67c/0x3b4c net/mac80211/tx.c:3854 sp : ffff800093d36700 x29: ffff800093d36a60 x28: ffff800093d36960 x27: dfff800000000000 x26: ffff0000d800ad50 x25: ffff0000d800abe0 x24: ffff0000d800abf0 x23: ffff0000e0032468 x22: ffff0000e00324d4 x21: ffff0000d800abf0 x20: ffff0000d800abf8 x19: ffff0000d800abf0 x18: ffff800093d363c0 x17: 000000000000d476 x16: ffff8000805519dc x15: ffff7000127a6cc8 x14: 1ffff000127a6cc8 x13: 0000000000000004 x12: ffffffffffffffff x11: ffff7000127a6cc8 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff80009287aa08 x4 : 0000000000000008 x3 : ffff80008034c7fc x2 : ffff0000e0032468 x1 : 00000000da0e46b8 x0 : ffff0000e0032470 Call trace: __list_del include/linux/list.h:195 [inline] __list_del_entry include/linux/list.h:218 [inline] list_move_tail include/linux/list.h:310 [inline] fq_tin_dequeue include/net/fq_impl.h:112 [inline] ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 wake_tx_push_queue net/mac80211/util.c:294 [inline] ieee80211_handle_wake_tx_queue+0x118/0x274 net/mac80211/util.c:315 drv_wake_tx_queue net/mac80211/driver-ops.h:1350 [inline] schedule_and_wake_txq net/mac80211/driver-ops.h:1357 [inline] ieee80211_queue_skb+0x18e8/0x2244 net/mac80211/tx.c:1664 ieee80211_tx+0x260/0x400 net/mac80211/tx.c:1966 ieee80211_xmit+0x278/0x354 net/mac80211/tx.c:2062 __ieee80211_subif_start_xmit+0xab8/0x122c net/mac80211/tx.c:4338 ieee80211_subif_start_xmit+0xe0/0x438 net/mac80211/tx.c:4532 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x27c/0x938 net/core/dev.c:3547 __dev_queue_xmit+0x1678/0x33fc net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] neigh_resolve_output+0x558/0x658 net/core/neighbour.c:1563 neigh_output include/net/neighbour.h:542 [inline] ip6_fini ---truncated--- |
| CVE-2024-42113 | In the Linux kernel, the following vulnerability has been resolved: net: txgbe: initialize num_q_vectors for MSI/INTx interrupts When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized. Thus there will be kernel panic in wx_alloc_q_vectors() to allocate queue vectors. |
| CVE-2024-42112 | In the Linux kernel, the following vulnerability has been resolved: net: txgbe: free isb resources at the right time When using MSI/INTx interrupt, the shared interrupts are still being handled in the device remove routine, before free IRQs. So isb memory is still read after it is freed. Thus move wx_free_isb_resources() from txgbe_close() to txgbe_remove(). And fix the improper isb free action in txgbe_open() error handling path. |
| CVE-2024-42111 | In the Linux kernel, the following vulnerability has been resolved: btrfs: always do the basic checks for btrfs_qgroup_inherit structure [BUG] Syzbot reports the following regression detected by KASAN: BUG: KASAN: slab-out-of-bounds in btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277 Read of size 8 at addr ffff88814628ca50 by task syz-executor318/5171 CPU: 0 PID: 5171 Comm: syz-executor318 Not tainted 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277 create_pending_snapshot+0x1359/0x29b0 fs/btrfs/transaction.c:1854 create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1922 btrfs_commit_transaction+0xf20/0x3740 fs/btrfs/transaction.c:2382 create_snapshot+0x6a1/0x9e0 fs/btrfs/ioctl.c:875 btrfs_mksubvol+0x58f/0x710 fs/btrfs/ioctl.c:1029 btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1075 __btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1340 btrfs_ioctl_snap_create_v2+0x1f2/0x3a0 fs/btrfs/ioctl.c:1422 btrfs_ioctl+0x99e/0xc60 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcbf1992509 RSP: 002b:00007fcbf1928218 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fcbf1a1f618 RCX: 00007fcbf1992509 RDX: 0000000020000280 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 00007fcbf1a1f610 R08: 00007ffea1298e97 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fcbf19eb660 R13: 00000000200002b8 R14: 00007fcbf19e60c0 R15: 0030656c69662f2e </TASK> And it also pinned it down to commit b5357cb268c4 ("btrfs: qgroup: do not check qgroup inherit if qgroup is disabled"). [CAUSE] That offending commit skips the whole qgroup inherit check if qgroup is not enabled. But that also skips the very basic checks like num_ref_copies/num_excl_copies and the structure size checks. Meaning if a qgroup enable/disable race is happening at the background, and we pass a btrfs_qgroup_inherit structure when the qgroup is disabled, the check would be completely skipped. Then at the time of transaction commitment, qgroup is re-enabled and btrfs_qgroup_inherit() is going to use the incorrect structure and causing the above KASAN error. [FIX] Make btrfs_qgroup_check_inherit() only skip the source qgroup checks. So that even if invalid btrfs_qgroup_inherit structure is passed in, we can still reject invalid ones no matter if qgroup is enabled or not. Furthermore we do already have an extra safety inside btrfs_qgroup_inherit(), which would just ignore invalid qgroup sources, so even if we only skip the qgroup source check we're still safe. |
| CVE-2024-42110 | In the Linux kernel, the following vulnerability has been resolved: net: ntb_netdev: Move ntb_netdev_rx_handler() to call netif_rx() from __netif_rx() The following is emitted when using idxd (DSA) dmanegine as the data mover for ntb_transport that ntb_netdev uses. [74412.546922] BUG: using smp_processor_id() in preemptible [00000000] code: irq/52-idxd-por/14526 [74412.556784] caller is netif_rx_internal+0x42/0x130 [74412.562282] CPU: 6 PID: 14526 Comm: irq/52-idxd-por Not tainted 6.9.5 #5 [74412.569870] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.E9I.1752.P05.2402080856 02/08/2024 [74412.581699] Call Trace: [74412.584514] <TASK> [74412.586933] dump_stack_lvl+0x55/0x70 [74412.591129] check_preemption_disabled+0xc8/0xf0 [74412.596374] netif_rx_internal+0x42/0x130 [74412.600957] __netif_rx+0x20/0xd0 [74412.604743] ntb_netdev_rx_handler+0x66/0x150 [ntb_netdev] [74412.610985] ntb_complete_rxc+0xed/0x140 [ntb_transport] [74412.617010] ntb_rx_copy_callback+0x53/0x80 [ntb_transport] [74412.623332] idxd_dma_complete_txd+0xe3/0x160 [idxd] [74412.628963] idxd_wq_thread+0x1a6/0x2b0 [idxd] [74412.634046] irq_thread_fn+0x21/0x60 [74412.638134] ? irq_thread+0xa8/0x290 [74412.642218] irq_thread+0x1a0/0x290 [74412.646212] ? __pfx_irq_thread_fn+0x10/0x10 [74412.651071] ? __pfx_irq_thread_dtor+0x10/0x10 [74412.656117] ? __pfx_irq_thread+0x10/0x10 [74412.660686] kthread+0x100/0x130 [74412.664384] ? __pfx_kthread+0x10/0x10 [74412.668639] ret_from_fork+0x31/0x50 [74412.672716] ? __pfx_kthread+0x10/0x10 [74412.676978] ret_from_fork_asm+0x1a/0x30 [74412.681457] </TASK> The cause is due to the idxd driver interrupt completion handler uses threaded interrupt and the threaded handler is not hard or soft interrupt context. However __netif_rx() can only be called from interrupt context. Change the call to netif_rx() in order to allow completion via normal context for dmaengine drivers that utilize threaded irq handling. While the following commit changed from netif_rx() to __netif_rx(), baebdf48c360 ("net: dev: Makes sure netif_rx() can be invoked in any context."), the change should've been a noop instead. However, the code precedes this fix should've been using netif_rx_ni() or netif_rx_any_context(). |
| CVE-2024-42109 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unconditionally flush pending work before notifier syzbot reports: KASAN: slab-uaf in nft_ctx_update include/net/netfilter/nf_tables.h:1831 KASAN: slab-uaf in nft_commit_release net/netfilter/nf_tables_api.c:9530 KASAN: slab-uaf int nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597 Read of size 2 at addr ffff88802b0051c4 by task kworker/1:1/45 [..] Workqueue: events nf_tables_trans_destroy_work Call Trace: nft_ctx_update include/net/netfilter/nf_tables.h:1831 [inline] nft_commit_release net/netfilter/nf_tables_api.c:9530 [inline] nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597 Problem is that the notifier does a conditional flush, but its possible that the table-to-be-removed is still referenced by transactions being processed by the worker, so we need to flush unconditionally. We could make the flush_work depend on whether we found a table to delete in nf-next to avoid the flush for most cases. AFAICS this problem is only exposed in nf-next, with commit e169285f8c56 ("netfilter: nf_tables: do not store nft_ctx in transaction objects"), with this commit applied there is an unconditional fetch of table->family which is whats triggering the above splat. |
| CVE-2024-42108 | In the Linux kernel, the following vulnerability has been resolved: net: rswitch: Avoid use-after-free in rswitch_poll() The use-after-free is actually in rswitch_tx_free(), which is inlined in rswitch_poll(). Since `skb` and `gq->skbs[gq->dirty]` are in fact the same pointer, the skb is first freed using dev_kfree_skb_any(), then the value in skb->len is used to update the interface statistics. Let's move around the instructions to use skb->len before the skb is freed. This bug is trivial to reproduce using KFENCE. It will trigger a splat every few packets. A simple ARP request or ICMP echo request is enough. |
| CVE-2024-42107 | In the Linux kernel, the following vulnerability has been resolved: ice: Don't process extts if PTP is disabled The ice_ptp_extts_event() function can race with ice_ptp_release() and result in a NULL pointer dereference which leads to a kernel panic. Panic occurs because the ice_ptp_extts_event() function calls ptp_clock_event() with a NULL pointer. The ice driver has already released the PTP clock by the time the interrupt for the next external timestamp event occurs. To fix this, modify the ice_ptp_extts_event() function to check the PTP state and bail early if PTP is not ready. |
| CVE-2024-42106 | In the Linux kernel, the following vulnerability has been resolved: inet_diag: Initialize pad field in struct inet_diag_req_v2 KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw sockets uses the pad field in struct inet_diag_req_v2 for the underlying protocol. This field corresponds to the sdiag_raw_protocol field in struct inet_diag_req_raw. inet_diag_get_exact_compat() converts inet_diag_req to inet_diag_req_v2, but leaves the pad field uninitialized. So the issue occurs when raw_lookup() accesses the sdiag_raw_protocol field. Fix this by initializing the pad field in inet_diag_get_exact_compat(). Also, do the same fix in inet_diag_dump_compat() to avoid the similar issue in the future. [1] BUG: KMSAN: uninit-value in raw_lookup net/ipv4/raw_diag.c:49 [inline] BUG: KMSAN: uninit-value in raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_lookup net/ipv4/raw_diag.c:49 [inline] raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: raw_sock_get+0x650/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable req.i created at: inet_diag_get_exact_compat net/ipv4/inet_diag.c:1396 [inline] inet_diag_rcv_msg_compat+0x2a6/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 CPU: 1 PID: 8888 Comm: syz-executor.6 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 |
| CVE-2024-42105 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix inode number range checks Patch series "nilfs2: fix potential issues related to reserved inodes". This series fixes one use-after-free issue reported by syzbot, caused by nilfs2's internal inode being exposed in the namespace on a corrupted filesystem, and a couple of flaws that cause problems if the starting number of non-reserved inodes written in the on-disk super block is intentionally (or corruptly) changed from its default value. This patch (of 3): In the current implementation of nilfs2, "nilfs->ns_first_ino", which gives the first non-reserved inode number, is read from the superblock, but its lower limit is not checked. As a result, if a number that overlaps with the inode number range of reserved inodes such as the root directory or metadata files is set in the super block parameter, the inode number test macros (NILFS_MDT_INODE and NILFS_VALID_INODE) will not function properly. In addition, these test macros use left bit-shift calculations using with the inode number as the shift count via the BIT macro, but the result of a shift calculation that exceeds the bit width of an integer is undefined in the C specification, so if "ns_first_ino" is set to a large value other than the default value NILFS_USER_INO (=11), the macros may potentially malfunction depending on the environment. Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and by preventing bit shifts equal to or greater than the NILFS_USER_INO constant in the inode number test macros. Also, change the type of "ns_first_ino" from signed integer to unsigned integer to avoid the need for type casting in comparisons such as the lower bound check introduced this time. |
| CVE-2024-42104 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: add missing check for inode numbers on directory entries Syzbot reported that mounting and unmounting a specific pattern of corrupted nilfs2 filesystem images causes a use-after-free of metadata file inodes, which triggers a kernel bug in lru_add_fn(). As Jan Kara pointed out, this is because the link count of a metadata file gets corrupted to 0, and nilfs_evict_inode(), which is called from iput(), tries to delete that inode (ifile inode in this case). The inconsistency occurs because directories containing the inode numbers of these metadata files that should not be visible in the namespace are read without checking. Fix this issue by treating the inode numbers of these internal files as errors in the sanity check helper when reading directory folios/pages. Also thanks to Hillf Danton and Matthew Wilcox for their initial mm-layer analysis. |
| CVE-2024-42103 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix adding block group to a reclaim list and the unused list during reclaim There is a potential parallel list adding for retrying in btrfs_reclaim_bgs_work and adding to the unused list. Since the block group is removed from the reclaim list and it is on a relocation work, it can be added into the unused list in parallel. When that happens, adding it to the reclaim list will corrupt the list head and trigger list corruption like below. Fix it by taking fs_info->unused_bgs_lock. [177.504][T2585409] BTRFS error (device nullb1): error relocating ch= unk 2415919104 [177.514][T2585409] list_del corruption. next->prev should be ff1100= 0344b119c0, but was ff11000377e87c70. (next=3Dff110002390cd9c0) [177.529][T2585409] ------------[ cut here ]------------ [177.537][T2585409] kernel BUG at lib/list_debug.c:65! [177.545][T2585409] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [177.555][T2585409] CPU: 9 PID: 2585409 Comm: kworker/u128:2 Tainted: G W 6.10.0-rc5-kts #1 [177.568][T2585409] Hardware name: Supermicro SYS-520P-WTR/X12SPW-TF, BIOS 1.2 02/14/2022 [177.579][T2585409] Workqueue: events_unbound btrfs_reclaim_bgs_work[btrfs] [177.589][T2585409] RIP: 0010:__list_del_entry_valid_or_report.cold+0x70/0x72 [177.624][T2585409] RSP: 0018:ff11000377e87a70 EFLAGS: 00010286 [177.633][T2585409] RAX: 000000000000006d RBX: ff11000344b119c0 RCX:0000000000000000 [177.644][T2585409] RDX: 000000000000006d RSI: 0000000000000008 RDI:ffe21c006efd0f40 [177.655][T2585409] RBP: ff110002e0509f78 R08: 0000000000000001 R09:ffe21c006efd0f08 [177.665][T2585409] R10: ff11000377e87847 R11: 0000000000000000 R12:ff110002390cd9c0 [177.676][T2585409] R13: ff11000344b119c0 R14: ff110002e0508000 R15:dffffc0000000000 [177.687][T2585409] FS: 0000000000000000(0000) GS:ff11000fec880000(0000) knlGS:0000000000000000 [177.700][T2585409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [177.709][T2585409] CR2: 00007f06bc7b1978 CR3: 0000001021e86005 CR4:0000000000771ef0 [177.720][T2585409] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000 [177.731][T2585409] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400 [177.742][T2585409] PKRU: 55555554 [177.748][T2585409] Call Trace: [177.753][T2585409] <TASK> [177.759][T2585409] ? __die_body.cold+0x19/0x27 [177.766][T2585409] ? die+0x2e/0x50 [177.772][T2585409] ? do_trap+0x1ea/0x2d0 [177.779][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.788][T2585409] ? do_error_trap+0xa3/0x160 [177.795][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.805][T2585409] ? handle_invalid_op+0x2c/0x40 [177.812][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.820][T2585409] ? exc_invalid_op+0x2d/0x40 [177.827][T2585409] ? asm_exc_invalid_op+0x1a/0x20 [177.834][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.843][T2585409] btrfs_delete_unused_bgs+0x3d9/0x14c0 [btrfs] There is a similar retry_list code in btrfs_delete_unused_bgs(), but it is safe, AFAICS. Since the block group was in the unused list, the used bytes should be 0 when it was added to the unused list. Then, it checks block_group->{used,reserved,pinned} are still 0 under the block_group->lock. So, they should be still eligible for the unused list, not the reclaim list. The reason it is safe there it's because because we're holding space_info->groups_sem in write mode. That means no other task can allocate from the block group, so while we are at deleted_unused_bgs() it's not possible for other tasks to allocate and deallocate extents from the block group, so it can't be added to the unused list or the reclaim list by anyone else. The bug can be reproduced by btrfs/166 after a few rounds. In practice this can be hit when relocation cannot find more chunk space and ends with ENOSPC. |
| CVE-2024-42102 | In the Linux kernel, the following vulnerability has been resolved: Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again" Patch series "mm: Avoid possible overflows in dirty throttling". Dirty throttling logic assumes dirty limits in page units fit into 32-bits. This patch series makes sure this is true (see patch 2/2 for more details). This patch (of 2): This reverts commit 9319b647902cbd5cc884ac08a8a6d54ce111fc78. The commit is broken in several ways. Firstly, the removed (u64) cast from the multiplication will introduce a multiplication overflow on 32-bit archs if wb_thresh * bg_thresh >= 1<<32 (which is actually common - the default settings with 4GB of RAM will trigger this). Secondly, the div64_u64() is unnecessarily expensive on 32-bit archs. We have div64_ul() in case we want to be safe & cheap. Thirdly, if dirty thresholds are larger than 1<<32 pages, then dirty balancing is going to blow up in many other spectacular ways anyway so trying to fix one possible overflow is just moot. |
| CVE-2024-42101 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes In nouveau_connector_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. |
| CVE-2024-42100 | In the Linux kernel, the following vulnerability has been resolved: clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common In order to set the rate range of a hw sunxi_ccu_probe calls hw_to_ccu_common() assuming all entries in desc->ccu_clks are contained in a ccu_common struct. This assumption is incorrect and, in consequence, causes invalid pointer de-references. Remove the faulty call. Instead, add one more loop that iterates over the ccu_clks and sets the rate range, if required. |
| CVE-2024-42099 | In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix invalid dereferencing of indirect CCW data pointer Fix invalid dereferencing of indirect CCW data pointer in dasd_eckd_dump_sense() that leads to a kernel panic in error cases. When using indirect addressing for DASD CCWs (IDAW) the CCW CDA pointer does not contain the data address itself but a pointer to the IDAL. This needs to be translated from physical to virtual as well before using it. This dereferencing is also used for dasd_page_cache and also fixed although it is very unlikely that this code path ever gets used. |
| CVE-2024-42098 | In the Linux kernel, the following vulnerability has been resolved: crypto: ecdh - explicitly zeroize private_key private_key is overwritten with the key parameter passed in by the caller (if present), or alternatively a newly generated private key. However, it is possible that the caller provides a key (or the newly generated key) which is shorter than the previous key. In that scenario, some key material from the previous key would not be overwritten. The easiest solution is to explicitly zeroize the entire private_key array first. Note that this patch slightly changes the behavior of this function: previously, if the ecc_gen_privkey failed, the old private_key would remain. Now, the private_key is always zeroized. This behavior is consistent with the case where params.key is set and ecc_is_key_valid fails. |
| CVE-2024-42097 | In the Linux kernel, the following vulnerability has been resolved: ALSA: emux: improve patch ioctl data validation In load_data(), make the validation of and skipping over the main info block match that in load_guspatch(). In load_guspatch(), add checking that the specified patch length matches the actually supplied data, like load_data() already did. |
| CVE-2024-42096 | In the Linux kernel, the following vulnerability has been resolved: x86: stop playing stack games in profile_pc() The 'profile_pc()' function is used for timer-based profiling, which isn't really all that relevant any more to begin with, but it also ends up making assumptions based on the stack layout that aren't necessarily valid. Basically, the code tries to account the time spent in spinlocks to the caller rather than the spinlock, and while I support that as a concept, it's not worth the code complexity or the KASAN warnings when no serious profiling is done using timers anyway these days. And the code really does depend on stack layout that is only true in the simplest of cases. We've lost the comment at some point (I think when the 32-bit and 64-bit code was unified), but it used to say: Assume the lock function has either no stack frame or a copy of eflags from PUSHF. which explains why it just blindly loads a word or two straight off the stack pointer and then takes a minimal look at the values to just check if they might be eflags or the return pc: Eflags always has bits 22 and up cleared unlike kernel addresses but that basic stack layout assumption assumes that there isn't any lock debugging etc going on that would complicate the code and cause a stack frame. It causes KASAN unhappiness reported for years by syzkaller [1] and others [2]. With no real practical reason for this any more, just remove the code. Just for historical interest, here's some background commits relating to this code from 2006: 0cb91a229364 ("i386: Account spinlocks to the caller during profiling for !FP kernels") 31679f38d886 ("Simplify profile_pc on x86-64") and a code unification from 2009: ef4512882dbe ("x86: time_32/64.c unify profile_pc") but the basics of this thing actually goes back to before the git tree. |
| CVE-2024-42095 | In the Linux kernel, the following vulnerability has been resolved: serial: 8250_omap: Implementation of Errata i2310 As per Errata i2310[0], Erroneous timeout can be triggered, if this Erroneous interrupt is not cleared then it may leads to storm of interrupts, therefore apply Errata i2310 solution. [0] https://www.ti.com/lit/pdf/sprz536 page 23 |
| CVE-2024-42094 | In the Linux kernel, the following vulnerability has been resolved: net/iucv: Avoid explicit cpumask var allocation on stack For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask variable on stack is not recommended since it can cause potential stack overflow. Instead, kernel code should always use *cpumask_var API(s) to allocate cpumask var in config-neutral way, leaving allocation strategy to CONFIG_CPUMASK_OFFSTACK. Use *cpumask_var API(s) to address it. |
| CVE-2024-42093 | In the Linux kernel, the following vulnerability has been resolved: net/dpaa2: Avoid explicit cpumask var allocation on stack For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask variable on stack is not recommended since it can cause potential stack overflow. Instead, kernel code should always use *cpumask_var API(s) to allocate cpumask var in config-neutral way, leaving allocation strategy to CONFIG_CPUMASK_OFFSTACK. Use *cpumask_var API(s) to address it. |
| CVE-2024-42092 | In the Linux kernel, the following vulnerability has been resolved: gpio: davinci: Validate the obtained number of IRQs Value of pdata->gpio_unbanked is taken from Device Tree. In case of broken DT due to any error this value can be any. Without this value validation there can be out of chips->irqs array boundaries access in davinci_gpio_probe(). Validate the obtained nirq value so that it won't exceed the maximum number of IRQs per bank. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-42091 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Check pat.ops before dumping PAT settings We may leave pat.ops unset when running on brand new platform or when running as a VF. While the former is unlikely, the latter is valid (future) use case and will cause NPD when someone will try to dump PAT settings by debugfs. It's better to check pointer to pat.ops instead of specific .dump hook, as we have this hook always defined for every .ops variant. |
| CVE-2024-42090 | In the Linux kernel, the following vulnerability has been resolved: pinctrl: fix deadlock in create_pinctrl() when handling -EPROBE_DEFER In create_pinctrl(), pinctrl_maps_mutex is acquired before calling add_setting(). If add_setting() returns -EPROBE_DEFER, create_pinctrl() calls pinctrl_free(). However, pinctrl_free() attempts to acquire pinctrl_maps_mutex, which is already held by create_pinctrl(), leading to a potential deadlock. This patch resolves the issue by releasing pinctrl_maps_mutex before calling pinctrl_free(), preventing the deadlock. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. |
| CVE-2024-42089 | In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl-asoc-card: set priv->pdev before using it priv->pdev pointer was set after being used in fsl_asoc_card_audmux_init(). Move this assignment at the start of the probe function, so sub-functions can correctly use pdev through priv. fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the dev struct, used with dev_err macros. As priv is zero-initialised, there would be a NULL pointer dereference. Note that if priv->dev is dereferenced before assignment but never used, for example if there is no error to be printed, the driver won't crash probably due to compiler optimisations. |
| CVE-2024-42088 | In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link") removed the codec entry for the ETDM1_OUT_BE dai link entirely instead of replacing it with COMP_EMPTY(). This worked by accident as the remaining COMP_EMPTY() platform entry became the codec entry, and the platform entry became completely empty, effectively the same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything for platform entries. This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe() in sound/soc/mediatek/common/mtk-soundcard-driver.c: for_each_card_prelinks(card, i, dai_link) { if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF"))) dai_link->platforms->of_node = adsp_node; else if (!dai_link->platforms->name && !dai_link->platforms->of_node) dai_link->platforms->of_node = platform_node; } where the code expects the platforms array to have space for at least one entry. Add an COMP_EMPTY() entry so that dai_link->platforms has space. |
| CVE-2024-42087 | In the Linux kernel, the following vulnerability has been resolved: drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep The ilitek-ili9881c controls the reset GPIO using the non-sleeping gpiod_set_value() function. This complains loudly when the GPIO controller needs to sleep. As the caller can sleep, use gpiod_set_value_cansleep() to fix the issue. |
| CVE-2024-42086 | In the Linux kernel, the following vulnerability has been resolved: iio: chemical: bme680: Fix overflows in compensate() functions There are cases in the compensate functions of the driver that there could be overflows of variables due to bit shifting ops. These implications were initially discussed here [1] and they were mentioned in log message of Commit 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor"). [1]: https://lore.kernel.org/linux-iio/20180728114028.3c1bbe81@archlinux/ |
| CVE-2024-42085 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: remove lock of otg mode during gadget suspend/resume to avoid deadlock When config CONFIG_USB_DWC3_DUAL_ROLE is selected, and trigger system to enter suspend status with below command: echo mem > /sys/power/state There will be a deadlock issue occurring. Detailed invoking path as below: dwc3_suspend_common() spin_lock_irqsave(&dwc->lock, flags); <-- 1st dwc3_gadget_suspend(dwc); dwc3_gadget_soft_disconnect(dwc); spin_lock_irqsave(&dwc->lock, flags); <-- 2nd This issue is exposed by commit c7ebd8149ee5 ("usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend") that removes the code of checking whether dwc->gadget_driver is NULL or not. It causes the following code is executed and deadlock occurs when trying to get the spinlock. In fact, the root cause is the commit 5265397f9442("usb: dwc3: Remove DWC3 locking during gadget suspend/resume") that forgot to remove the lock of otg mode. So, remove the redundant lock of otg mode during gadget suspend/resume. |
| CVE-2024-42084 | In the Linux kernel, the following vulnerability has been resolved: ftruncate: pass a signed offset The old ftruncate() syscall, using the 32-bit off_t misses a sign extension when called in compat mode on 64-bit architectures. As a result, passing a negative length accidentally succeeds in truncating to file size between 2GiB and 4GiB. Changing the type of the compat syscall to the signed compat_off_t changes the behavior so it instead returns -EINVAL. The native entry point, the truncate() syscall and the corresponding loff_t based variants are all correct already and do not suffer from this mistake. |
| CVE-2024-42083 | In the Linux kernel, the following vulnerability has been resolved: ionic: fix kernel panic due to multi-buffer handling Currently, the ionic_run_xdp() doesn't handle multi-buffer packets properly for XDP_TX and XDP_REDIRECT. When a jumbo frame is received, the ionic_run_xdp() first makes xdp frame with all necessary pages in the rx descriptor. And if the action is either XDP_TX or XDP_REDIRECT, it should unmap dma-mapping and reset page pointer to NULL for all pages, not only the first page. But it doesn't for SG pages. So, SG pages unexpectedly will be reused. It eventually causes kernel panic. Oops: general protection fault, probably for non-canonical address 0x504f4e4dbebc64ff: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.10.0-rc3+ #25 RIP: 0010:xdp_return_frame+0x42/0x90 Code: 01 75 12 5b 4c 89 e6 5d 31 c9 41 5c 31 d2 41 5d e9 73 fd ff ff 44 8b 6b 20 0f b7 43 0a 49 81 ed 68 01 00 00 49 29 c5 49 01 fd <41> 80 7d0 RSP: 0018:ffff99d00122ce08 EFLAGS: 00010202 RAX: 0000000000005453 RBX: ffff8d325f904000 RCX: 0000000000000001 RDX: 00000000670e1000 RSI: 000000011f90d000 RDI: 504f4e4d4c4b4a49 RBP: ffff99d003907740 R08: 0000000000000000 R09: 0000000000000000 R10: 000000011f90d000 R11: 0000000000000000 R12: ffff8d325f904010 R13: 504f4e4dbebc64fd R14: ffff8d3242b070c8 R15: ffff99d0039077c0 FS: 0000000000000000(0000) GS:ffff8d399f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f41f6c85e38 CR3: 000000037ac30000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? die_addr+0x33/0x90 ? exc_general_protection+0x251/0x2f0 ? asm_exc_general_protection+0x22/0x30 ? xdp_return_frame+0x42/0x90 ionic_tx_clean+0x211/0x280 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] ionic_tx_cq_service+0xd3/0x210 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] ionic_txrx_napi+0x41/0x1b0 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] __napi_poll.constprop.0+0x29/0x1b0 net_rx_action+0x2c4/0x350 handle_softirqs+0xf4/0x320 irq_exit_rcu+0x78/0xa0 common_interrupt+0x77/0x90 |
| CVE-2024-42082 | In the Linux kernel, the following vulnerability has been resolved: xdp: Remove WARN() from __xdp_reg_mem_model() syzkaller reports a warning in __xdp_reg_mem_model(). The warning occurs only if __mem_id_init_hash_table() returns an error. It returns the error in two cases: 1. memory allocation fails; 2. rhashtable_init() fails when some fields of rhashtable_params struct are not initialized properly. The second case cannot happen since there is a static const rhashtable_params struct with valid fields. So, warning is only triggered when there is a problem with memory allocation. Thus, there is no sense in using WARN() to handle this error and it can be safely removed. WARNING: CPU: 0 PID: 5065 at net/core/xdp.c:299 __xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299 CPU: 0 PID: 5065 Comm: syz-executor883 Not tainted 6.8.0-syzkaller-05271-gf99c5f563c17 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:__xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299 Call Trace: xdp_reg_mem_model+0x22/0x40 net/core/xdp.c:344 xdp_test_run_setup net/bpf/test_run.c:188 [inline] bpf_test_run_xdp_live+0x365/0x1e90 net/bpf/test_run.c:377 bpf_prog_test_run_xdp+0x813/0x11b0 net/bpf/test_run.c:1267 bpf_prog_test_run+0x33a/0x3b0 kernel/bpf/syscall.c:4240 __sys_bpf+0x48d/0x810 kernel/bpf/syscall.c:5649 __do_sys_bpf kernel/bpf/syscall.c:5738 [inline] __se_sys_bpf kernel/bpf/syscall.c:5736 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5736 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Found by Linux Verification Center (linuxtesting.org) with syzkaller. |
| CVE-2024-42081 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/xe_devcoredump: Check NULL before assignments Assign 'xe_devcoredump_snapshot *' and 'xe_device *' only if 'coredump' is not NULL. v2 - Fix commit messages. v3 - Define variables before code.(Ashutosh/Jose) v4 - Drop return check for coredump_to_xe. (Jose/Rodrigo) v5 - Modify misleading commit message. (Matt) |
| CVE-2024-42080 | In the Linux kernel, the following vulnerability has been resolved: RDMA/restrack: Fix potential invalid address access struct rdma_restrack_entry's kern_name was set to KBUILD_MODNAME in ib_create_cq(), while if the module exited but forgot del this rdma_restrack_entry, it would cause a invalid address access in rdma_restrack_clean() when print the owner of this rdma_restrack_entry. These code is used to help find one forgotten PD release in one of the ULPs. But it is not needed anymore, so delete them. |
| CVE-2024-42079 | In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix NULL pointer dereference in gfs2_log_flush In gfs2_jindex_free(), set sdp->sd_jdesc to NULL under the log flush lock to provide exclusion against gfs2_log_flush(). In gfs2_log_flush(), check if sdp->sd_jdesc is non-NULL before dereferencing it. Otherwise, we could run into a NULL pointer dereference when outstanding glock work races with an unmount (glock_work_func -> run_queue -> do_xmote -> inode_go_sync -> gfs2_log_flush). |
| CVE-2024-42078 | In the Linux kernel, the following vulnerability has been resolved: nfsd: initialise nfsd_info.mutex early. nfsd_info.mutex can be dereferenced by svc_pool_stats_start() immediately after the new netns is created. Currently this can trigger an oops. Move the initialisation earlier before it can possibly be dereferenced. |
| CVE-2024-42077 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix DIO failure due to insufficient transaction credits The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba |
| CVE-2024-42076 | In the Linux kernel, the following vulnerability has been resolved: net: can: j1939: Initialize unused data in j1939_send_one() syzbot reported kernel-infoleak in raw_recvmsg() [1]. j1939_send_one() creates full frame including unused data, but it doesn't initialize it. This causes the kernel-infoleak issue. Fix this by initializing unused data. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 copy_to_iter include/linux/uio.h:196 [inline] memcpy_to_msg include/linux/skbuff.h:4113 [inline] raw_recvmsg+0x2b8/0x9e0 net/can/raw.c:1008 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x2c4/0x340 net/socket.c:1068 ____sys_recvmsg+0x18a/0x620 net/socket.c:2803 ___sys_recvmsg+0x223/0x840 net/socket.c:2845 do_recvmmsg+0x4fc/0xfd0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:3034 x64_sys_call+0xf6c/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:300 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1313 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 sock_alloc_send_skb include/net/sock.h:1842 [inline] j1939_sk_alloc_skb net/can/j1939/socket.c:878 [inline] j1939_sk_send_loop net/can/j1939/socket.c:1142 [inline] j1939_sk_sendmsg+0xc0a/0x2730 net/can/j1939/socket.c:1277 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 x64_sys_call+0xc4b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Bytes 12-15 of 16 are uninitialized Memory access of size 16 starts at ffff888120969690 Data copied to user address 00000000200017c0 CPU: 1 PID: 5050 Comm: syz-executor198 Not tainted 6.9.0-rc5-syzkaller-00031-g71b1543c83d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 |
| CVE-2024-42075 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix remap of arena. The bpf arena logic didn't account for mremap operation. Add a refcnt for multiple mmap events to prevent use-after-free in arena_vm_close. |
| CVE-2024-42074 | In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp: add a null check for chip_pdev structure When acp platform device creation is skipped, chip->chip_pdev value will remain NULL. Add NULL check for chip->chip_pdev structure in snd_acp_resume() function to avoid null pointer dereference. |
| CVE-2024-42073 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_buffers: Fix memory corruptions on Spectrum-4 systems The following two shared buffer operations make use of the Shared Buffer Status Register (SBSR): # devlink sb occupancy snapshot pci/0000:01:00.0 # devlink sb occupancy clearmax pci/0000:01:00.0 The register has two masks of 256 bits to denote on which ingress / egress ports the register should operate on. Spectrum-4 has more than 256 ports, so the register was extended by cited commit with a new 'port_page' field. However, when filling the register's payload, the driver specifies the ports as absolute numbers and not relative to the first port of the port page, resulting in memory corruptions [1]. Fix by specifying the ports relative to the first port of the port page. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 Read of size 1 at addr ffff8881068cb00f by task devlink/1566 [...] Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 mlxsw_devlink_sb_occ_snapshot+0x75/0xb0 devlink_nl_sb_occ_snapshot_doit+0x1f9/0x2a0 genl_family_rcv_msg_doit+0x20c/0x300 genl_rcv_msg+0x567/0x800 netlink_rcv_skb+0x170/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x547/0x830 netlink_sendmsg+0x8d4/0xdb0 __sys_sendto+0x49b/0x510 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 copy_verifier_state+0xbc2/0xfb0 do_check_common+0x2c51/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x109/0x170 __kasan_slab_free+0x14/0x30 kfree+0xca/0x2b0 free_verifier_state+0xce/0x270 do_check_common+0x4828/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| CVE-2024-42072 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix may_goto with negative offset. Zac's syzbot crafted a bpf prog that exposed two bugs in may_goto. The 1st bug is the way may_goto is patched. When offset is negative it should be patched differently. The 2nd bug is in the verifier: when current state may_goto_depth is equal to visited state may_goto_depth it means there is an actual infinite loop. It's not correct to prune exploration of the program at this point. Note, that this check doesn't limit the program to only one may_goto insn, since 2nd and any further may_goto will increment may_goto_depth only in the queued state pushed for future exploration. The current state will have may_goto_depth == 0 regardless of number of may_goto insns and the verifier has to explore the program until bpf_exit. |
| CVE-2024-42071 | In the Linux kernel, the following vulnerability has been resolved: ionic: use dev_consume_skb_any outside of napi If we're not in a NAPI softirq context, we need to be careful about how we call napi_consume_skb(), specifically we need to call it with budget==0 to signal to it that we're not in a safe context. This was found while running some configuration stress testing of traffic and a change queue config loop running, and this curious note popped out: [ 4371.402645] BUG: using smp_processor_id() in preemptible [00000000] code: ethtool/20545 [ 4371.402897] caller is napi_skb_cache_put+0x16/0x80 [ 4371.403120] CPU: 25 PID: 20545 Comm: ethtool Kdump: loaded Tainted: G OE 6.10.0-rc3-netnext+ #8 [ 4371.403302] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 01/23/2021 [ 4371.403460] Call Trace: [ 4371.403613] <TASK> [ 4371.403758] dump_stack_lvl+0x4f/0x70 [ 4371.403904] check_preemption_disabled+0xc1/0xe0 [ 4371.404051] napi_skb_cache_put+0x16/0x80 [ 4371.404199] ionic_tx_clean+0x18a/0x240 [ionic] [ 4371.404354] ionic_tx_cq_service+0xc4/0x200 [ionic] [ 4371.404505] ionic_tx_flush+0x15/0x70 [ionic] [ 4371.404653] ? ionic_lif_qcq_deinit.isra.23+0x5b/0x70 [ionic] [ 4371.404805] ionic_txrx_deinit+0x71/0x190 [ionic] [ 4371.404956] ionic_reconfigure_queues+0x5f5/0xff0 [ionic] [ 4371.405111] ionic_set_ringparam+0x2e8/0x3e0 [ionic] [ 4371.405265] ethnl_set_rings+0x1f1/0x300 [ 4371.405418] ethnl_default_set_doit+0xbb/0x160 [ 4371.405571] genl_family_rcv_msg_doit+0xff/0x130 [...] I found that ionic_tx_clean() calls napi_consume_skb() which calls napi_skb_cache_put(), but before that last call is the note /* Zero budget indicate non-NAPI context called us, like netpoll */ and DEBUG_NET_WARN_ON_ONCE(!in_softirq()); Those are pretty big hints that we're doing it wrong. We can pass a context hint down through the calls to let ionic_tx_clean() know what we're doing so it can call napi_consume_skb() correctly. |
| CVE-2024-42070 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers register store validation for NFT_DATA_VALUE is conditional, however, the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This only requires a new helper function to infer the register type from the set datatype so this conditional check can be removed. Otherwise, pointer to chain object can be leaked through the registers. |
| CVE-2024-42069 | In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix possible double free in error handling path When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function adev_release calls kfree(madev). We shouldn't call kfree(madev) again in the error handling path. Set 'madev' to NULL. |
| CVE-2024-42068 | In the Linux kernel, the following vulnerability has been resolved: bpf: Take return from set_memory_ro() into account with bpf_prog_lock_ro() set_memory_ro() can fail, leaving memory unprotected. Check its return and take it into account as an error. |
| CVE-2024-42067 | In the Linux kernel, the following vulnerability has been resolved: bpf: Take return from set_memory_rox() into account with bpf_jit_binary_lock_ro() set_memory_rox() can fail, leaving memory unprotected. Check return and bail out when bpf_jit_binary_lock_ro() returns an error. |
| CVE-2024-42066 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix potential integer overflow in page size calculation Explicitly cast tbo->page_alignment to u64 before bit-shifting to prevent overflow when assigning to min_page_size. |
| CVE-2024-42065 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Add a NULL check in xe_ttm_stolen_mgr_init Add an explicit check to ensure that the mgr is not NULL. |
| CVE-2024-42064 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip pipe if the pipe idx not set properly [why] Driver crashes when pipe idx not set properly [how] Add code to skip the pipe that idx not set properly |
| CVE-2024-42063 | In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf prog stack with kmsan_unposion_memory in interpreter mode syzbot reported uninit memory usages during map_{lookup,delete}_elem. ========== BUG: KMSAN: uninit-value in __dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline] BUG: KMSAN: uninit-value in dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796 __dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline] dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796 ____bpf_map_lookup_elem kernel/bpf/helpers.c:42 [inline] bpf_map_lookup_elem+0x5c/0x80 kernel/bpf/helpers.c:38 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run256+0xb5/0xe0 kernel/bpf/core.c:2237 ========== The reproducer should be in the interpreter mode. The C reproducer is trying to run the following bpf prog: 0: (18) r0 = 0x0 2: (18) r1 = map[id:49] 4: (b7) r8 = 16777216 5: (7b) *(u64 *)(r10 -8) = r8 6: (bf) r2 = r10 7: (07) r2 += -229 ^^^^^^^^^^ 8: (b7) r3 = 8 9: (b7) r4 = 0 10: (85) call dev_map_lookup_elem#1543472 11: (95) exit It is due to the "void *key" (r2) passed to the helper. bpf allows uninit stack memory access for bpf prog with the right privileges. This patch uses kmsan_unpoison_memory() to mark the stack as initialized. This should address different syzbot reports on the uninit "void *key" argument during map_{lookup,delete}_elem. |
| CVE-2024-41098 | In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Fix null pointer dereference on error If the ata_port_alloc() call in ata_host_alloc() fails, ata_host_release() will get called. However, the code in ata_host_release() tries to free ata_port struct members unconditionally, which can lead to the following: BUG: unable to handle page fault for address: 0000000000003990 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 PID: 594 Comm: (udev-worker) Not tainted 6.10.0-rc5 #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:ata_host_release.cold+0x2f/0x6e [libata] Code: e4 4d 63 f4 44 89 e2 48 c7 c6 90 ad 32 c0 48 c7 c7 d0 70 33 c0 49 83 c6 0e 41 RSP: 0018:ffffc90000ebb968 EFLAGS: 00010246 RAX: 0000000000000041 RBX: ffff88810fb52e78 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88813b3218c0 RDI: ffff88813b3218c0 RBP: ffff88810fb52e40 R08: 0000000000000000 R09: 6c65725f74736f68 R10: ffffc90000ebb738 R11: 73692033203a746e R12: 0000000000000004 R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000006 FS: 00007f6cc55b9980(0000) GS:ffff88813b300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000003990 CR3: 00000001122a2000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2f0 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? ata_host_release.cold+0x2f/0x6e [libata] ? ata_host_release.cold+0x2f/0x6e [libata] release_nodes+0x35/0xb0 devres_release_group+0x113/0x140 ata_host_alloc+0xed/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Do not access ata_port struct members unconditionally. |
| CVE-2024-41097 | In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: fix endpoint checking in cxacru_bind() Syzbot is still reporting quite an old issue [1] that occurs due to incomplete checking of present usb endpoints. As such, wrong endpoints types may be used at urb sumbitting stage which in turn triggers a warning in usb_submit_urb(). Fix the issue by verifying that required endpoint types are present for both in and out endpoints, taking into account cmd endpoint type. Unfortunately, this patch has not been tested on real hardware. [1] Syzbot report: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 8667 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 0 PID: 8667 Comm: kworker/0:4 Not tainted 5.14.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 ... Call Trace: cxacru_cm+0x3c0/0x8e0 drivers/usb/atm/cxacru.c:649 cxacru_card_status+0x22/0xd0 drivers/usb/atm/cxacru.c:760 cxacru_bind+0x7ac/0x11a0 drivers/usb/atm/cxacru.c:1209 usbatm_usb_probe+0x321/0x1ae0 drivers/usb/atm/usbatm.c:1055 cxacru_usb_probe+0xdf/0x1e0 drivers/usb/atm/cxacru.c:1363 usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396 call_driver_probe drivers/base/dd.c:517 [inline] really_probe+0x23c/0xcd0 drivers/base/dd.c:595 __driver_probe_device+0x338/0x4d0 drivers/base/dd.c:747 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:777 __device_attach_driver+0x20b/0x2f0 drivers/base/dd.c:894 bus_for_each_drv+0x15f/0x1e0 drivers/base/bus.c:427 __device_attach+0x228/0x4a0 drivers/base/dd.c:965 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:487 device_add+0xc2f/0x2180 drivers/base/core.c:3354 usb_set_configuration+0x113a/0x1910 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0xba/0x100 drivers/usb/core/generic.c:238 usb_probe_device+0xd9/0x2c0 drivers/usb/core/driver.c:293 |
| CVE-2024-41096 | In the Linux kernel, the following vulnerability has been resolved: PCI/MSI: Fix UAF in msi_capability_init KFENCE reports the following UAF: BUG: KFENCE: use-after-free read in __pci_enable_msi_range+0x2c0/0x488 Use-after-free read at 0x0000000024629571 (in kfence-#12): __pci_enable_msi_range+0x2c0/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 kfence-#12: 0x0000000008614900-0x00000000e06c228d, size=104, cache=kmalloc-128 allocated by task 81 on cpu 7 at 10.808142s: __kmem_cache_alloc_node+0x1f0/0x2bc kmalloc_trace+0x44/0x138 msi_alloc_desc+0x3c/0x9c msi_domain_insert_msi_desc+0x30/0x78 msi_setup_msi_desc+0x13c/0x184 __pci_enable_msi_range+0x258/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 freed by task 81 on cpu 7 at 10.811436s: msi_domain_free_descs+0xd4/0x10c msi_domain_free_locked.part.0+0xc0/0x1d8 msi_domain_alloc_irqs_all_locked+0xb4/0xbc pci_msi_setup_msi_irqs+0x30/0x4c __pci_enable_msi_range+0x2a8/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 Descriptor allocation done in: __pci_enable_msi_range msi_capability_init msi_setup_msi_desc msi_insert_msi_desc msi_domain_insert_msi_desc msi_alloc_desc ... Freed in case of failure in __msi_domain_alloc_locked() __pci_enable_msi_range msi_capability_init pci_msi_setup_msi_irqs msi_domain_alloc_irqs_all_locked msi_domain_alloc_locked __msi_domain_alloc_locked => fails msi_domain_free_locked ... That failure propagates back to pci_msi_setup_msi_irqs() in msi_capability_init() which accesses the descriptor for unmasking in the error exit path. Cure it by copying the descriptor and using the copy for the error exit path unmask operation. [ tglx: Massaged change log ] |
| CVE-2024-41095 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_ld_modes In nv17_tv_get_ld_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. |
| CVE-2024-41094 | In the Linux kernel, the following vulnerability has been resolved: drm/fbdev-dma: Only set smem_start is enable per module option Only export struct fb_info.fix.smem_start if that is required by the user and the memory does not come from vmalloc(). Setting struct fb_info.fix.smem_start breaks systems where DMA memory is backed by vmalloc address space. An example error is shown below. [ 3.536043] ------------[ cut here ]------------ [ 3.540716] virt_to_phys used for non-linear address: 000000007fc4f540 (0xffff800086001000) [ 3.552628] WARNING: CPU: 4 PID: 61 at arch/arm64/mm/physaddr.c:12 __virt_to_phys+0x68/0x98 [ 3.565455] Modules linked in: [ 3.568525] CPU: 4 PID: 61 Comm: kworker/u12:5 Not tainted 6.6.23-06226-g4986cc3e1b75-dirty #250 [ 3.577310] Hardware name: NXP i.MX95 19X19 board (DT) [ 3.582452] Workqueue: events_unbound deferred_probe_work_func [ 3.588291] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3.595233] pc : __virt_to_phys+0x68/0x98 [ 3.599246] lr : __virt_to_phys+0x68/0x98 [ 3.603276] sp : ffff800083603990 [ 3.677939] Call trace: [ 3.680393] __virt_to_phys+0x68/0x98 [ 3.684067] drm_fbdev_dma_helper_fb_probe+0x138/0x238 [ 3.689214] __drm_fb_helper_initial_config_and_unlock+0x2b0/0x4c0 [ 3.695385] drm_fb_helper_initial_config+0x4c/0x68 [ 3.700264] drm_fbdev_dma_client_hotplug+0x8c/0xe0 [ 3.705161] drm_client_register+0x60/0xb0 [ 3.709269] drm_fbdev_dma_setup+0x94/0x148 Additionally, DMA memory is assumed to by contiguous in physical address space, which is not guaranteed by vmalloc(). Resolve this by checking the module flag drm_leak_fbdev_smem when DRM allocated the instance of struct fb_info. Fbdev-dma then only sets smem_start only if required (via FBINFO_HIDE_SMEM_START). Also guarantee that the framebuffer is not located in vmalloc address space. |
| CVE-2024-41093 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: avoid using null object of framebuffer Instead of using state->fb->obj[0] directly, get object from framebuffer by calling drm_gem_fb_get_obj() and return error code when object is null to avoid using null object of framebuffer. |
| CVE-2024-41092 | In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Fix potential UAF by revoke of fence registers CI has been sporadically reporting the following issue triggered by igt@i915_selftest@live@hangcheck on ADL-P and similar machines: <6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence ... <6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <3> [414.070354] Unable to pin Y-tiled fence; err:-4 <3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active)) ... <4>[ 609.603992] ------------[ cut here ]------------ <2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301! <4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1 <4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 <4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915] <4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915] ... <4>[ 609.604271] Call Trace: <4>[ 609.604273] <TASK> ... <4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915] <4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915] <4>[ 609.604977] force_unbind+0x24/0xa0 [i915] <4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915] <4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915] <4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915] <4>[ 609.605440] process_scheduled_works+0x351/0x690 ... In the past, there were similar failures reported by CI from other IGT tests, observed on other platforms. Before commit 63baf4f3d587 ("drm/i915/gt: Only wait for GPU activity before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for idleness of vma->active via fence_update(). That commit introduced vma->fence->active in order for the fence_update() to be able to wait selectively on that one instead of vma->active since only idleness of fence registers was needed. But then, another commit 0d86ee35097a ("drm/i915/gt: Make fence revocation unequivocal") replaced the call to fence_update() in i915_vma_revoke_fence() with only fence_write(), and also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front. No justification was provided on why we might then expect idleness of vma->fence->active without first waiting on it. The issue can be potentially caused by a race among revocation of fence registers on one side and sequential execution of signal callbacks invoked on completion of a request that was using them on the other, still processed in parallel to revocation of those fence registers. Fix it by waiting for idleness of vma->fence->active in i915_vma_revoke_fence(). (cherry picked from commit 24bb052d3dd499c5956abad5f7d8e4fd07da7fb1) |
| CVE-2024-41091 | In the Linux kernel, the following vulnerability has been resolved: tun: add missing verification for short frame The cited commit missed to check against the validity of the frame length in the tun_xdp_one() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tun_xdp_one-->eth_type_trans() may access the Ethernet header although it can be less than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or confuse the underlayer with incorrect or inconsistent header length in the skb metadata. In the alternative path, tun_get_user() already prohibits short frame which has the length less than Ethernet header size from being transmitted for IFF_TAP. This is to drop any frame shorter than the Ethernet header size just like how tun_get_user() does. CVE: CVE-2024-41091 |
| CVE-2024-41090 | In the Linux kernel, the following vulnerability has been resolved: tap: add missing verification for short frame The cited commit missed to check against the validity of the frame length in the tap_get_user_xdp() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tap_get_user_xdp()-->skb_set_network_header() may assume the size is more than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or confuse the underlayer with incorrect or inconsistent header length in the skb metadata. In the alternative path, tap_get_user() already prohibits short frame which has the length less than Ethernet header size from being transmitted. This is to drop any frame shorter than the Ethernet header size just like how tap_get_user() does. CVE: CVE-2024-41090 |
| CVE-2024-41089 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_hd_modes In nv17_tv_get_hd_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). The same applies to drm_cvt_mode(). Add a check to avoid null pointer dereference. |
| CVE-2024-41088 | In the Linux kernel, the following vulnerability has been resolved: can: mcp251xfd: fix infinite loop when xmit fails When the mcp251xfd_start_xmit() function fails, the driver stops processing messages, and the interrupt routine does not return, running indefinitely even after killing the running application. Error messages: [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16 [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3). ... and repeat forever. The issue can be triggered when multiple devices share the same SPI interface. And there is concurrent access to the bus. The problem occurs because tx_ring->head increments even if mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX package while still expecting a response in mcp251xfd_handle_tefif_one(). Resolve the issue by starting a workqueue to write the tx obj synchronously if err = -EBUSY. In case of another error, decrement tx_ring->head, remove skb from the echo stack, and drop the message. [mkl: use more imperative wording in patch description] |
| CVE-2024-41087 | In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Fix double free on error If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump to the err_out label, which will call devres_release_group(). devres_release_group() will trigger a call to ata_host_release(). ata_host_release() calls kfree(host), so executing the kfree(host) in ata_host_alloc() will lead to a double free: kernel BUG at mm/slub.c:553! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 11 PID: 599 Comm: (udev-worker) Not tainted 6.10.0-rc5 #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:kfree+0x2cf/0x2f0 Code: 5d 41 5e 41 5f 5d e9 80 d6 ff ff 4d 89 f1 41 b8 01 00 00 00 48 89 d9 48 89 da RSP: 0018:ffffc90000f377f0 EFLAGS: 00010246 RAX: ffff888112b1f2c0 RBX: ffff888112b1f2c0 RCX: ffff888112b1f320 RDX: 000000000000400b RSI: ffffffffc02c9de5 RDI: ffff888112b1f2c0 RBP: ffffc90000f37830 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90000f37610 R11: 617461203a736b6e R12: ffffea00044ac780 R13: ffff888100046400 R14: ffffffffc02c9de5 R15: 0000000000000006 FS: 00007f2f1cabe980(0000) GS:ffff88813b380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2f1c3acf75 CR3: 0000000111724000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x6a/0x90 ? kfree+0x2cf/0x2f0 ? exc_invalid_op+0x50/0x70 ? kfree+0x2cf/0x2f0 ? asm_exc_invalid_op+0x1a/0x20 ? ata_host_alloc+0xf5/0x120 [libata] ? ata_host_alloc+0xf5/0x120 [libata] ? kfree+0x2cf/0x2f0 ata_host_alloc+0xf5/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Ensure that we will not call kfree(host) twice, by performing the kfree() only if the devres_open_group() call failed. |
| CVE-2024-41086 | In the Linux kernel, the following vulnerability has been resolved: bcachefs: Fix sb_field_downgrade validation - bch2_sb_downgrade_validate() wasn't checking for a downgrade entry extending past the end of the superblock section - for_each_downgrade_entry() is used in to_text() and needs to work on malformed input; it also was missing a check for a field extending past the end of the section |
| CVE-2024-41085 | In the Linux kernel, the following vulnerability has been resolved: cxl/mem: Fix no cxl_nvd during pmem region auto-assembling When CXL subsystem is auto-assembling a pmem region during cxl endpoint port probing, always hit below calltrace. BUG: kernel NULL pointer dereference, address: 0000000000000078 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page RIP: 0010:cxl_pmem_region_probe+0x22e/0x360 [cxl_pmem] Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x160 ? do_user_addr_fault+0x65/0x6b0 ? exc_page_fault+0x7d/0x170 ? asm_exc_page_fault+0x26/0x30 ? cxl_pmem_region_probe+0x22e/0x360 [cxl_pmem] ? cxl_pmem_region_probe+0x1ac/0x360 [cxl_pmem] cxl_bus_probe+0x1b/0x60 [cxl_core] really_probe+0x173/0x410 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x80/0x170 driver_probe_device+0x1e/0x90 __device_attach_driver+0x90/0x120 bus_for_each_drv+0x84/0xe0 __device_attach+0xbc/0x1f0 bus_probe_device+0x90/0xa0 device_add+0x51c/0x710 devm_cxl_add_pmem_region+0x1b5/0x380 [cxl_core] cxl_bus_probe+0x1b/0x60 [cxl_core] The cxl_nvd of the memdev needs to be available during the pmem region probe. Currently the cxl_nvd is registered after the endpoint port probe. The endpoint probe, in the case of autoassembly of regions, can cause a pmem region probe requiring the not yet available cxl_nvd. Adjust the sequence so this dependency is met. This requires adding a port parameter to cxl_find_nvdimm_bridge() that can be used to query the ancestor root port. The endpoint port is not yet available, but will share a common ancestor with its parent, so start the query from there instead. |
| CVE-2024-41084 | In the Linux kernel, the following vulnerability has been resolved: cxl/region: Avoid null pointer dereference in region lookup cxl_dpa_to_region() looks up a region based on a memdev and DPA. It wrongly assumes an endpoint found mapping the DPA is also of a fully assembled region. When not true it leads to a null pointer dereference looking up the region name. This appears during testing of region lookup after a failure to assemble a BIOS defined region or if the lookup raced with the assembly of the BIOS defined region. Failure to clean up BIOS defined regions that fail assembly is an issue in itself and a fix to that problem will alleviate some of the impact. It will not alleviate the race condition so let's harden this path. The behavior change is that the kernel oops due to a null pointer dereference is replaced with a dev_dbg() message noting that an endpoint was mapped. Additional comments are added so that future users of this function can more clearly understand what it provides. |
| CVE-2024-41083 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_page_mkwrite() to check folio->mapping is valid Fix netfs_page_mkwrite() to check that folio->mapping is valid once it has taken the folio lock (as filemap_page_mkwrite() does). Without this, generic/247 occasionally oopses with something like the following: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page RIP: 0010:trace_event_raw_event_netfs_folio+0x61/0xc0 ... Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x6e/0xa0 ? exc_page_fault+0xc2/0xe0 ? asm_exc_page_fault+0x22/0x30 ? trace_event_raw_event_netfs_folio+0x61/0xc0 trace_netfs_folio+0x39/0x40 netfs_page_mkwrite+0x14c/0x1d0 do_page_mkwrite+0x50/0x90 do_pte_missing+0x184/0x200 __handle_mm_fault+0x42d/0x500 handle_mm_fault+0x121/0x1f0 do_user_addr_fault+0x23e/0x3c0 exc_page_fault+0xc2/0xe0 asm_exc_page_fault+0x22/0x30 This is due to the invalidate_inode_pages2_range() issued at the end of the DIO write interfering with the mmap'd writes. |
| CVE-2024-41082 | In the Linux kernel, the following vulnerability has been resolved: nvme-fabrics: use reserved tag for reg read/write command In some scenarios, if too many commands are issued by nvme command in the same time by user tasks, this may exhaust all tags of admin_q. If a reset (nvme reset or IO timeout) occurs before these commands finish, reconnect routine may fail to update nvme regs due to insufficient tags, which will cause kernel hang forever. In order to workaround this issue, maybe we can let reg_read32()/reg_read64()/reg_write32() use reserved tags. This maybe safe for nvmf: 1. For the disable ctrl path, we will not issue connect command 2. For the enable ctrl / fw activate path, since connect and reg_xx() are called serially. So the reserved tags may still be enough while reg_xx() use reserved tags. |
| CVE-2024-41081 | In the Linux kernel, the following vulnerability has been resolved: ila: block BH in ila_output() As explained in commit 1378817486d6 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled. ila_output() is called from lwtunnel_output() possibly from process context, and under rcu_read_lock(). We might be interrupted by a softirq, re-enter ila_output() and corrupt dst_cache data structures. Fix the race by using local_bh_disable(). |
| CVE-2024-41080 | In the Linux kernel, the following vulnerability has been resolved: io_uring: fix possible deadlock in io_register_iowq_max_workers() The io_register_iowq_max_workers() function calls io_put_sq_data(), which acquires the sqd->lock without releasing the uring_lock. Similar to the commit 009ad9f0c6ee ("io_uring: drop ctx->uring_lock before acquiring sqd->lock"), this can lead to a potential deadlock situation. To resolve this issue, the uring_lock is released before calling io_put_sq_data(), and then it is re-acquired after the function call. This change ensures that the locks are acquired in the correct order, preventing the possibility of a deadlock. |
| CVE-2024-41079 | In the Linux kernel, the following vulnerability has been resolved: nvmet: always initialize cqe.result The spec doesn't mandate that the first two double words (aka results) for the command queue entry need to be set to 0 when they are not used (not specified). Though, the target implemention returns 0 for TCP and FC but not for RDMA. Let's make RDMA behave the same and thus explicitly initializing the result field. This prevents leaking any data from the stack. |
| CVE-2024-41078 | In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix quota root leak after quota disable failure If during the quota disable we fail when cleaning the quota tree or when deleting the root from the root tree, we jump to the 'out' label without ever dropping the reference on the quota root, resulting in a leak of the root since fs_info->quota_root is no longer pointing to the root (we have set it to NULL just before those steps). Fix this by always doing a btrfs_put_root() call under the 'out' label. This is a problem that exists since qgroups were first added in 2012 by commit bed92eae26cc ("Btrfs: qgroup implementation and prototypes"), but back then we missed a kfree on the quota root and free_extent_buffer() calls on its root and commit root nodes, since back then roots were not yet reference counted. |
| CVE-2024-41077 | In the Linux kernel, the following vulnerability has been resolved: null_blk: fix validation of block size Block size should be between 512 and PAGE_SIZE and be a power of 2. The current check does not validate this, so update the check. Without this patch, null_blk would Oops due to a null pointer deref when loaded with bs=1536 [1]. [axboe: remove unnecessary braces and != 0 check] |
| CVE-2024-41076 | In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix memory leak in nfs4_set_security_label We leak nfs_fattr and nfs4_label every time we set a security xattr. |
| CVE-2024-41075 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: add consistency check for copen/cread This prevents malicious processes from completing random copen/cread requests and crashing the system. Added checks are listed below: * Generic, copen can only complete open requests, and cread can only complete read requests. * For copen, ondemand_id must not be 0, because this indicates that the request has not been read by the daemon. * For cread, the object corresponding to fd and req should be the same. |
| CVE-2024-41074 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: Set object to close if ondemand_id < 0 in copen If copen is maliciously called in the user mode, it may delete the request corresponding to the random id. And the request may have not been read yet. Note that when the object is set to reopen, the open request will be done with the still reopen state in above case. As a result, the request corresponding to this object is always skipped in select_req function, so the read request is never completed and blocks other process. Fix this issue by simply set object to close if its id < 0 in copen. |
| CVE-2024-41073 | In the Linux kernel, the following vulnerability has been resolved: nvme: avoid double free special payload If a discard request needs to be retried, and that retry may fail before a new special payload is added, a double free will result. Clear the RQF_SPECIAL_LOAD when the request is cleaned. |
| CVE-2024-41072 | In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: wext: add extra SIOCSIWSCAN data check In 'cfg80211_wext_siwscan()', add extra check whether number of channels passed via 'ioctl(sock, SIOCSIWSCAN, ...)' doesn't exceed IW_MAX_FREQUENCIES and reject invalid request with -EINVAL otherwise. |
| CVE-2024-41071 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Avoid address calculations via out of bounds array indexing req->n_channels must be set before req->channels[] can be used. This patch fixes one of the issues encountered in [1]. [ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4 [ 83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]' [...] [ 83.964264] Call Trace: [ 83.964267] <TASK> [ 83.964269] dump_stack_lvl+0x3f/0xc0 [ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110 [ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0 [ 83.964281] __ieee80211_start_scan+0x601/0x990 [ 83.964291] nl80211_trigger_scan+0x874/0x980 [ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160 [ 83.964298] genl_rcv_msg+0x240/0x270 [...] [1] https://bugzilla.kernel.org/show_bug.cgi?id=218810 |
| CVE-2024-41070 | In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group() Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group(). It looks up `stt` from tablefd, but then continues to use it after doing fdput() on the returned fd. After the fdput() the tablefd is free to be closed by another thread. The close calls kvm_spapr_tce_release() and then release_spapr_tce_table() (via call_rcu()) which frees `stt`. Although there are calls to rcu_read_lock() in kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent the UAF, because `stt` is used outside the locked regions. With an artifcial delay after the fdput() and a userspace program which triggers the race, KASAN detects the UAF: BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505 CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1 Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV Call Trace: dump_stack_lvl+0xb4/0x108 (unreliable) print_report+0x2b4/0x6ec kasan_report+0x118/0x2b0 __asan_load4+0xb8/0xd0 kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] kvm_vfio_set_attr+0x524/0xac0 [kvm] kvm_device_ioctl+0x144/0x240 [kvm] sys_ioctl+0x62c/0x1810 system_call_exception+0x190/0x440 system_call_vectored_common+0x15c/0x2ec ... Freed by task 0: ... kfree+0xec/0x3e0 release_spapr_tce_table+0xd4/0x11c [kvm] rcu_core+0x568/0x16a0 handle_softirqs+0x23c/0x920 do_softirq_own_stack+0x6c/0x90 do_softirq_own_stack+0x58/0x90 __irq_exit_rcu+0x218/0x2d0 irq_exit+0x30/0x80 arch_local_irq_restore+0x128/0x230 arch_local_irq_enable+0x1c/0x30 cpuidle_enter_state+0x134/0x5cc cpuidle_enter+0x6c/0xb0 call_cpuidle+0x7c/0x100 do_idle+0x394/0x410 cpu_startup_entry+0x60/0x70 start_secondary+0x3fc/0x410 start_secondary_prolog+0x10/0x14 Fix it by delaying the fdput() until `stt` is no longer in use, which is effectively the entire function. To keep the patch minimal add a call to fdput() at each of the existing return paths. Future work can convert the function to goto or __cleanup style cleanup. With the fix in place the test case no longer triggers the UAF. |
| CVE-2024-41069 | In the Linux kernel, the following vulnerability has been resolved: ASoC: topology: Fix references to freed memory Most users after parsing a topology file, release memory used by it, so having pointer references directly into topology file contents is wrong. Use devm_kmemdup(), to allocate memory as needed. |
| CVE-2024-41068 | In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Fix sclp_init() cleanup on failure If sclp_init() fails it only partially cleans up: if there are multiple failing calls to sclp_init() sclp_state_change_event will be added several times to sclp_reg_list, which results in the following warning: ------------[ cut here ]------------ list_add double add: new=000003ffe1598c10, prev=000003ffe1598bf0, next=000003ffe1598c10. WARNING: CPU: 0 PID: 1 at lib/list_debug.c:35 __list_add_valid_or_report+0xde/0xf8 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc3 Krnl PSW : 0404c00180000000 000003ffe0d6076a (__list_add_valid_or_report+0xe2/0xf8) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 ... Call Trace: [<000003ffe0d6076a>] __list_add_valid_or_report+0xe2/0xf8 ([<000003ffe0d60766>] __list_add_valid_or_report+0xde/0xf8) [<000003ffe0a8d37e>] sclp_init+0x40e/0x450 [<000003ffe00009f2>] do_one_initcall+0x42/0x1e0 [<000003ffe15b77a6>] do_initcalls+0x126/0x150 [<000003ffe15b7a0a>] kernel_init_freeable+0x1ba/0x1f8 [<000003ffe0d6650e>] kernel_init+0x2e/0x180 [<000003ffe000301c>] __ret_from_fork+0x3c/0x60 [<000003ffe0d759ca>] ret_from_fork+0xa/0x30 Fix this by removing sclp_state_change_event from sclp_reg_list when sclp_init() fails. |
| CVE-2024-41067 | In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: handle RST lookup error correctly [BUG] When running btrfs/060 with forced RST feature, it would crash the following ASSERT() inside scrub_read_endio(): ASSERT(sector_nr < stripe->nr_sectors); Before that, we would have tree dump from btrfs_get_raid_extent_offset(), as we failed to find the RST entry for the range. [CAUSE] Inside scrub_submit_extent_sector_read() every time we allocated a new bbio we immediately called btrfs_map_block() to make sure there was some RST range covering the scrub target. But if btrfs_map_block() fails, we immediately call endio for the bbio, while the bbio is newly allocated, it's completely empty. Then inside scrub_read_endio(), we go through the bvecs to find the sector number (as bi_sector is no longer reliable if the bio is submitted to lower layers). And since the bio is empty, such bvecs iteration would not find any sector matching the sector, and return sector_nr == stripe->nr_sectors, triggering the ASSERT(). [FIX] Instead of calling btrfs_map_block() after allocating a new bbio, call btrfs_map_block() first. Since our only objective of calling btrfs_map_block() is only to update stripe_len, there is really no need to do that after btrfs_alloc_bio(). This new timing would avoid the problem of handling empty bbio completely, and in fact fixes a possible race window for the old code, where if the submission thread is the only owner of the pending_io, the scrub would never finish (since we didn't decrease the pending_io counter). Although the root cause of RST lookup failure still needs to be addressed. |
| CVE-2024-41066 | In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Add tx check to prevent skb leak Below is a summary of how the driver stores a reference to an skb during transmit: tx_buff[free_map[consumer_index]]->skb = new_skb; free_map[consumer_index] = IBMVNIC_INVALID_MAP; consumer_index ++; Where variable data looks like this: free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3] consumer_index^ tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null] The driver has checks to ensure that free_map[consumer_index] pointed to a valid index but there was no check to ensure that this index pointed to an unused/null skb address. So, if, by some chance, our free_map and tx_buff lists become out of sync then we were previously risking an skb memory leak. This could then cause tcp congestion control to stop sending packets, eventually leading to ETIMEDOUT. Therefore, add a conditional to ensure that the skb address is null. If not then warn the user (because this is still a bug that should be patched) and free the old pointer to prevent memleak/tcp problems. |
| CVE-2024-41065 | In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Whitelist dtl slub object for copying to userspace Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-* results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as shown below. kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth pseries_wdt dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 27 PID: 1815 Comm: python3 Not tainted 6.10.0-rc3 #85 Hardware name: IBM,9040-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_042) hv:phyp pSeries NIP: c0000000005d23d4 LR: c0000000005d23d0 CTR: 00000000006ee6f8 REGS: c000000120c078c0 TRAP: 0700 Not tainted (6.10.0-rc3) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 2828220f XER: 0000000e CFAR: c0000000001fdc80 IRQMASK: 0 [ ... GPRs omitted ... ] NIP [c0000000005d23d4] usercopy_abort+0x78/0xb0 LR [c0000000005d23d0] usercopy_abort+0x74/0xb0 Call Trace: usercopy_abort+0x74/0xb0 (unreliable) __check_heap_object+0xf8/0x120 check_heap_object+0x218/0x240 __check_object_size+0x84/0x1a4 dtl_file_read+0x17c/0x2c4 full_proxy_read+0x8c/0x110 vfs_read+0xdc/0x3a0 ksys_read+0x84/0x144 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec --- interrupt: 3000 at 0x7fff81f3ab34 Commit 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0") requires that only whitelisted areas in slab/slub objects can be copied to userspace when usercopy hardening is enabled using CONFIG_HARDENED_USERCOPY. Dtl contains hypervisor dispatch events which are expected to be read by privileged users. Hence mark this safe for user access. Specify useroffset=0 and usersize=DISPATCH_LOG_BYTES to whitelist the entire object. |
| CVE-2024-41064 | In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: avoid possible crash when edev->pdev changes If a PCI device is removed during eeh_pe_report_edev(), edev->pdev will change and can cause a crash, hold the PCI rescan/remove lock while taking a copy of edev->pdev->bus. |
| CVE-2024-41063 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: cancel all works upon hci_unregister_dev() syzbot is reporting that calling hci_release_dev() from hci_error_reset() due to hci_dev_put() from hci_error_reset() can cause deadlock at destroy_workqueue(), for hci_error_reset() is called from hdev->req_workqueue which destroy_workqueue() needs to flush. We need to make sure that hdev->{rx_work,cmd_work,tx_work} which are queued into hdev->workqueue and hdev->{power_on,error_reset} which are queued into hdev->req_workqueue are no longer running by the moment destroy_workqueue(hdev->workqueue); destroy_workqueue(hdev->req_workqueue); are called from hci_release_dev(). Call cancel_work_sync() on these work items from hci_unregister_dev() as soon as hdev->list is removed from hci_dev_list. |
| CVE-2024-41062 | In the Linux kernel, the following vulnerability has been resolved: bluetooth/l2cap: sync sock recv cb and release The problem occurs between the system call to close the sock and hci_rx_work, where the former releases the sock and the latter accesses it without lock protection. CPU0 CPU1 ---- ---- sock_close hci_rx_work l2cap_sock_release hci_acldata_packet l2cap_sock_kill l2cap_recv_frame sk_free l2cap_conless_channel l2cap_sock_recv_cb If hci_rx_work processes the data that needs to be received before the sock is closed, then everything is normal; Otherwise, the work thread may access the released sock when receiving data. Add a chan mutex in the rx callback of the sock to achieve synchronization between the sock release and recv cb. Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer. |
| CVE-2024-41061 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport [Why] Potential out of bounds access in dml2_calculate_rq_and_dlg_params() because the value of out_lowest_state_idx used as an index for FCLKChangeSupport array can be greater than 1. [How] Currently dml2 core specifies identical values for all FCLKChangeSupport elements. Always use index 0 in the condition to avoid out of bounds access. |
| CVE-2024-41060 | In the Linux kernel, the following vulnerability has been resolved: drm/radeon: check bo_va->bo is non-NULL before using it The call to radeon_vm_clear_freed might clear bo_va->bo, so we have to check it before dereferencing it. |
| CVE-2024-41059 | In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix uninit-value in copy_name [syzbot reported] BUG: KMSAN: uninit-value in sized_strscpy+0xc4/0x160 sized_strscpy+0xc4/0x160 copy_name+0x2af/0x320 fs/hfsplus/xattr.c:411 hfsplus_listxattr+0x11e9/0x1a50 fs/hfsplus/xattr.c:750 vfs_listxattr fs/xattr.c:493 [inline] listxattr+0x1f3/0x6b0 fs/xattr.c:840 path_listxattr fs/xattr.c:864 [inline] __do_sys_listxattr fs/xattr.c:876 [inline] __se_sys_listxattr fs/xattr.c:873 [inline] __x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873 x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3877 [inline] slab_alloc_node mm/slub.c:3918 [inline] kmalloc_trace+0x57b/0xbe0 mm/slub.c:4065 kmalloc include/linux/slab.h:628 [inline] hfsplus_listxattr+0x4cc/0x1a50 fs/hfsplus/xattr.c:699 vfs_listxattr fs/xattr.c:493 [inline] listxattr+0x1f3/0x6b0 fs/xattr.c:840 path_listxattr fs/xattr.c:864 [inline] __do_sys_listxattr fs/xattr.c:876 [inline] __se_sys_listxattr fs/xattr.c:873 [inline] __x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873 x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Fix] When allocating memory to strbuf, initialize memory to 0. |
| CVE-2024-41058 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in fscache_withdraw_volume() We got the following issue in our fault injection stress test: ================================================================== BUG: KASAN: slab-use-after-free in fscache_withdraw_volume+0x2e1/0x370 Read of size 4 at addr ffff88810680be08 by task ondemand-04-dae/5798 CPU: 0 PID: 5798 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #565 Call Trace: kasan_check_range+0xf6/0x1b0 fscache_withdraw_volume+0x2e1/0x370 cachefiles_withdraw_volume+0x31/0x50 cachefiles_withdraw_cache+0x3ad/0x900 cachefiles_put_unbind_pincount+0x1f6/0x250 cachefiles_daemon_release+0x13b/0x290 __fput+0x204/0xa00 task_work_run+0x139/0x230 Allocated by task 5820: __kmalloc+0x1df/0x4b0 fscache_alloc_volume+0x70/0x600 __fscache_acquire_volume+0x1c/0x610 erofs_fscache_register_volume+0x96/0x1a0 erofs_fscache_register_fs+0x49a/0x690 erofs_fc_fill_super+0x6c0/0xcc0 vfs_get_super+0xa9/0x140 vfs_get_tree+0x8e/0x300 do_new_mount+0x28c/0x580 [...] Freed by task 5820: kfree+0xf1/0x2c0 fscache_put_volume.part.0+0x5cb/0x9e0 erofs_fscache_unregister_fs+0x157/0x1b0 erofs_kill_sb+0xd9/0x1c0 deactivate_locked_super+0xa3/0x100 vfs_get_super+0x105/0x140 vfs_get_tree+0x8e/0x300 do_new_mount+0x28c/0x580 [...] ================================================================== Following is the process that triggers the issue: mount failed | daemon exit ------------------------------------------------------------ deactivate_locked_super cachefiles_daemon_release erofs_kill_sb erofs_fscache_unregister_fs fscache_relinquish_volume __fscache_relinquish_volume fscache_put_volume(fscache_volume, fscache_volume_put_relinquish) zero = __refcount_dec_and_test(&fscache_volume->ref, &ref); cachefiles_put_unbind_pincount cachefiles_daemon_unbind cachefiles_withdraw_cache cachefiles_withdraw_volumes list_del_init(&volume->cache_link) fscache_free_volume(fscache_volume) cache->ops->free_volume cachefiles_free_volume list_del_init(&cachefiles_volume->cache_link); kfree(fscache_volume) cachefiles_withdraw_volume fscache_withdraw_volume fscache_volume->n_accesses // fscache_volume UAF !!! The fscache_volume in cache->volumes must not have been freed yet, but its reference count may be 0. So use the new fscache_try_get_volume() helper function try to get its reference count. If the reference count of fscache_volume is 0, fscache_put_volume() is freeing it, so wait for it to be removed from cache->volumes. If its reference count is not 0, call cachefiles_withdraw_volume() with reference count protection to avoid the above issue. |
| CVE-2024-41057 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie() We got the following issue in our fault injection stress test: ================================================================== BUG: KASAN: slab-use-after-free in cachefiles_withdraw_cookie+0x4d9/0x600 Read of size 8 at addr ffff888118efc000 by task kworker/u78:0/109 CPU: 13 PID: 109 Comm: kworker/u78:0 Not tainted 6.8.0-dirty #566 Call Trace: <TASK> kasan_report+0x93/0xc0 cachefiles_withdraw_cookie+0x4d9/0x600 fscache_cookie_state_machine+0x5c8/0x1230 fscache_cookie_worker+0x91/0x1c0 process_one_work+0x7fa/0x1800 [...] Allocated by task 117: kmalloc_trace+0x1b3/0x3c0 cachefiles_acquire_volume+0xf3/0x9c0 fscache_create_volume_work+0x97/0x150 process_one_work+0x7fa/0x1800 [...] Freed by task 120301: kfree+0xf1/0x2c0 cachefiles_withdraw_cache+0x3fa/0x920 cachefiles_put_unbind_pincount+0x1f6/0x250 cachefiles_daemon_release+0x13b/0x290 __fput+0x204/0xa00 task_work_run+0x139/0x230 do_exit+0x87a/0x29b0 [...] ================================================================== Following is the process that triggers the issue: p1 | p2 ------------------------------------------------------------ fscache_begin_lookup fscache_begin_volume_access fscache_cache_is_live(fscache_cache) cachefiles_daemon_release cachefiles_put_unbind_pincount cachefiles_daemon_unbind cachefiles_withdraw_cache fscache_withdraw_cache fscache_set_cache_state(cache, FSCACHE_CACHE_IS_WITHDRAWN); cachefiles_withdraw_objects(cache) fscache_wait_for_objects(fscache) atomic_read(&fscache_cache->object_count) == 0 fscache_perform_lookup cachefiles_lookup_cookie cachefiles_alloc_object refcount_set(&object->ref, 1); object->volume = volume fscache_count_object(vcookie->cache); atomic_inc(&fscache_cache->object_count) cachefiles_withdraw_volumes cachefiles_withdraw_volume fscache_withdraw_volume __cachefiles_free_volume kfree(cachefiles_volume) fscache_cookie_state_machine cachefiles_withdraw_cookie cache = object->volume->cache; // cachefiles_volume UAF !!! After setting FSCACHE_CACHE_IS_WITHDRAWN, wait for all the cookie lookups to complete first, and then wait for fscache_cache->object_count == 0 to avoid the cookie exiting after the volume has been freed and triggering the above issue. Therefore call fscache_withdraw_volume() before calling cachefiles_withdraw_objects(). This way, after setting FSCACHE_CACHE_IS_WITHDRAWN, only the following two cases will occur: 1) fscache_begin_lookup fails in fscache_begin_volume_access(). 2) fscache_withdraw_volume() will ensure that fscache_count_object() has been executed before calling fscache_wait_for_objects(). |
| CVE-2024-41056 | In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files Use strnlen() instead of strlen() on the algorithm and coefficient name string arrays in V1 wmfw files. In V1 wmfw files the name is a NUL-terminated string in a fixed-size array. cs_dsp should protect against overrunning the array if the NUL terminator is missing. |
| CVE-2024-41055 | In the Linux kernel, the following vulnerability has been resolved: mm: prevent derefencing NULL ptr in pfn_section_valid() Commit 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing memory_section->usage") changed pfn_section_valid() to add a READ_ONCE() call around "ms->usage" to fix a race with section_deactivate() where ms->usage can be cleared. The READ_ONCE() call, by itself, is not enough to prevent NULL pointer dereference. We need to check its value before dereferencing it. |
| CVE-2024-41054 | In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix ufshcd_clear_cmd racing issue When ufshcd_clear_cmd is racing with the completion ISR, the completed tag of the request's mq_hctx pointer will be set to NULL by the ISR. And ufshcd_clear_cmd's call to ufshcd_mcq_req_to_hwq will get NULL pointer KE. Return success when the request is completed by ISR because sq does not need cleanup. The racing flow is: Thread A ufshcd_err_handler step 1 ufshcd_try_to_abort_task ufshcd_cmd_inflight(true) step 3 ufshcd_clear_cmd ... ufshcd_mcq_req_to_hwq blk_mq_unique_tag rq->mq_hctx->queue_num step 5 Thread B ufs_mtk_mcq_intr(cq complete ISR) step 2 scsi_done ... __blk_mq_free_request rq->mq_hctx = NULL; step 4 Below is KE back trace: ufshcd_try_to_abort_task: cmd pending in the device. tag = 6 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194 pc : [0xffffffd589679bf8] blk_mq_unique_tag+0x8/0x14 lr : [0xffffffd5862f95b4] ufshcd_mcq_sq_cleanup+0x6c/0x1cc [ufs_mediatek_mod_ise] Workqueue: ufs_eh_wq_0 ufshcd_err_handler [ufs_mediatek_mod_ise] Call trace: dump_backtrace+0xf8/0x148 show_stack+0x18/0x24 dump_stack_lvl+0x60/0x7c dump_stack+0x18/0x3c mrdump_common_die+0x24c/0x398 [mrdump] ipanic_die+0x20/0x34 [mrdump] notify_die+0x80/0xd8 die+0x94/0x2b8 __do_kernel_fault+0x264/0x298 do_page_fault+0xa4/0x4b8 do_translation_fault+0x38/0x54 do_mem_abort+0x58/0x118 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x54/0x90 el1h_64_sync+0x68/0x6c blk_mq_unique_tag+0x8/0x14 ufshcd_clear_cmd+0x34/0x118 [ufs_mediatek_mod_ise] ufshcd_try_to_abort_task+0x2c8/0x5b4 [ufs_mediatek_mod_ise] ufshcd_err_handler+0xa7c/0xfa8 [ufs_mediatek_mod_ise] process_one_work+0x208/0x4fc worker_thread+0x228/0x438 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20 |
| CVE-2024-41053 | In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix ufshcd_abort_one racing issue When ufshcd_abort_one is racing with the completion ISR, the completed tag of the request's mq_hctx pointer will be set to NULL by ISR. Return success when request is completed by ISR because ufshcd_abort_one does not need to do anything. The racing flow is: Thread A ufshcd_err_handler step 1 ... ufshcd_abort_one ufshcd_try_to_abort_task ufshcd_cmd_inflight(true) step 3 ufshcd_mcq_req_to_hwq blk_mq_unique_tag rq->mq_hctx->queue_num step 5 Thread B ufs_mtk_mcq_intr(cq complete ISR) step 2 scsi_done ... __blk_mq_free_request rq->mq_hctx = NULL; step 4 Below is KE back trace. ufshcd_try_to_abort_task: cmd at tag 41 not pending in the device. ufshcd_try_to_abort_task: cmd at tag=41 is cleared. Aborting tag 41 / CDB 0x28 succeeded Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194 pc : [0xffffffddd7a79bf8] blk_mq_unique_tag+0x8/0x14 lr : [0xffffffddd6155b84] ufshcd_mcq_req_to_hwq+0x1c/0x40 [ufs_mediatek_mod_ise] do_mem_abort+0x58/0x118 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x54/0x90 el1h_64_sync+0x68/0x6c blk_mq_unique_tag+0x8/0x14 ufshcd_err_handler+0xae4/0xfa8 [ufs_mediatek_mod_ise] process_one_work+0x208/0x4fc worker_thread+0x228/0x438 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20 |
| CVE-2024-41052 | In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Init the count variable in collecting hot-reset devices The count variable is used without initialization, it results in mistakes in the device counting and crashes the userspace if the get hot reset info path is triggered. |
| CVE-2024-41051 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: wait for ondemand_object_worker to finish when dropping object When queuing ondemand_object_worker() to re-open the object, cachefiles_object is not pinned. The cachefiles_object may be freed when the pending read request is completed intentionally and the related erofs is umounted. If ondemand_object_worker() runs after the object is freed, it will incur use-after-free problem as shown below. process A processs B process C process D cachefiles_ondemand_send_req() // send a read req X // wait for its completion // close ondemand fd cachefiles_ondemand_fd_release() // set object as CLOSE cachefiles_ondemand_daemon_read() // set object as REOPENING queue_work(fscache_wq, &info->ondemand_work) // close /dev/cachefiles cachefiles_daemon_release cachefiles_flush_reqs complete(&req->done) // read req X is completed // umount the erofs fs cachefiles_put_object() // object will be freed cachefiles_ondemand_deinit_obj_info() kmem_cache_free(object) // both info and object are freed ondemand_object_worker() When dropping an object, it is no longer necessary to reopen the object, so use cancel_work_sync() to cancel or wait for ondemand_object_worker() to finish. |
| CVE-2024-41050 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: cyclic allocation of msg_id to avoid reuse Reusing the msg_id after a maliciously completed reopen request may cause a read request to remain unprocessed and result in a hung, as shown below: t1 | t2 | t3 ------------------------------------------------- cachefiles_ondemand_select_req cachefiles_ondemand_object_is_close(A) cachefiles_ondemand_set_object_reopening(A) queue_work(fscache_object_wq, &info->work) ondemand_object_worker cachefiles_ondemand_init_object(A) cachefiles_ondemand_send_req(OPEN) // get msg_id 6 wait_for_completion(&req_A->done) cachefiles_ondemand_daemon_read // read msg_id 6 req_A cachefiles_ondemand_get_fd copy_to_user // Malicious completion msg_id 6 copen 6,-1 cachefiles_ondemand_copen complete(&req_A->done) // will not set the object to close // because ondemand_id && fd is valid. // ondemand_object_worker() is done // but the object is still reopening. // new open req_B cachefiles_ondemand_init_object(B) cachefiles_ondemand_send_req(OPEN) // reuse msg_id 6 process_open_req copen 6,A.size // The expected failed copen was executed successfully Expect copen to fail, and when it does, it closes fd, which sets the object to close, and then close triggers reopen again. However, due to msg_id reuse resulting in a successful copen, the anonymous fd is not closed until the daemon exits. Therefore read requests waiting for reopen to complete may trigger hung task. To avoid this issue, allocate the msg_id cyclically to avoid reusing the msg_id for a very short duration of time. |
| CVE-2024-41049 | In the Linux kernel, the following vulnerability has been resolved: filelock: fix potential use-after-free in posix_lock_inode Light Hsieh reported a KASAN UAF warning in trace_posix_lock_inode(). The request pointer had been changed earlier to point to a lock entry that was added to the inode's list. However, before the tracepoint could fire, another task raced in and freed that lock. Fix this by moving the tracepoint inside the spinlock, which should ensure that this doesn't happen. |
| CVE-2024-41048 | In the Linux kernel, the following vulnerability has been resolved: skmsg: Skip zero length skb in sk_msg_recvmsg When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch platform, the following kernel panic occurs: [...] Oops[#1]: CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ #18 Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018 ... ... ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560 ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 0000000c (PPLV0 +PIE +PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000040 PRID: 0014c011 (Loongson-64bit, Loongson-3C5000) Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...) Stack : ... Call Trace: [<9000000004162774>] copy_page_to_iter+0x74/0x1c0 [<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560 [<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0 [<90000000049aae34>] inet_recvmsg+0x54/0x100 [<900000000481ad5c>] sock_recvmsg+0x7c/0xe0 [<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0 [<900000000481e27c>] sys_recvfrom+0x1c/0x40 [<9000000004c076ec>] do_syscall+0x8c/0xc0 [<9000000003731da4>] handle_syscall+0xc4/0x160 Code: ... ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception Kernel relocated by 0x3510000 .text @ 0x9000000003710000 .data @ 0x9000000004d70000 .bss @ 0x9000000006469400 ---[ end Kernel panic - not syncing: Fatal exception ]--- [...] This crash happens every time when running sockmap_skb_verdict_shutdown subtest in sockmap_basic. This crash is because a NULL pointer is passed to page_address() in the sk_msg_recvmsg(). Due to the different implementations depending on the architecture, page_address(NULL) will trigger a panic on Loongarch platform but not on x86 platform. So this bug was hidden on x86 platform for a while, but now it is exposed on Loongarch platform. The root cause is that a zero length skb (skb->len == 0) was put on the queue. This zero length skb is a TCP FIN packet, which was sent by shutdown(), invoked in test_sockmap_skb_verdict_shutdown(): shutdown(p1, SHUT_WR); In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no page is put to this sge (see sg_set_page in sg_set_page), but this empty sge is queued into ingress_msg list. And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it to kmap_local_page() and to page_address(), then kernel panics. To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(), if copy is zero, that means it's a zero length skb, skip invoking copy_page_to_iter(). We are using the EFAULT return triggered by copy_page_to_iter to check for is_fin in tcp_bpf.c. |
| CVE-2024-41047 | In the Linux kernel, the following vulnerability has been resolved: i40e: Fix XDP program unloading while removing the driver The commit 6533e558c650 ("i40e: Fix reset path while removing the driver") introduced a new PF state "__I40E_IN_REMOVE" to block modifying the XDP program while the driver is being removed. Unfortunately, such a change is useful only if the ".ndo_bpf()" callback was called out of the rmmod context because unloading the existing XDP program is also a part of driver removing procedure. In other words, from the rmmod context the driver is expected to unload the XDP program without reporting any errors. Otherwise, the kernel warning with callstack is printed out to dmesg. Example failing scenario: 1. Load the i40e driver. 2. Load the XDP program. 3. Unload the i40e driver (using "rmmod" command). The example kernel warning log: [ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.002726] Call Trace: [ +0.002457] <TASK> [ +0.002119] ? __warn+0x80/0x120 [ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005586] ? report_bug+0x164/0x190 [ +0.003678] ? handle_bug+0x3c/0x80 [ +0.003503] ? exc_invalid_op+0x17/0x70 [ +0.003846] ? asm_exc_invalid_op+0x1a/0x20 [ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870 [ +0.005586] unregister_netdevice_queue+0xf7/0x140 [ +0.004806] unregister_netdev+0x1c/0x30 [ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e] [ +0.004604] i40e_remove+0x1a1/0x420 [i40e] [ +0.004220] pci_device_remove+0x3f/0xb0 [ +0.003943] device_release_driver_internal+0x19f/0x200 [ +0.005243] driver_detach+0x48/0x90 [ +0.003586] bus_remove_driver+0x6d/0xf0 [ +0.003939] pci_unregister_driver+0x2e/0xb0 [ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e] [ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310 [ +0.005153] do_syscall_64+0x85/0x170 [ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220 [ +0.004886] ? do_syscall_64+0x95/0x170 [ +0.003851] ? exc_page_fault+0x7e/0x180 [ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79 [ +0.005064] RIP: 0033:0x7f59dc9347cb [ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48 [ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb [ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748 [ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000 [ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000 [ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000 [ +0.007151] </TASK> [ +0.002204] ---[ end trace 0000000000000000 ]--- Fix this by checking if the XDP program is being loaded or unloaded. Then, block only loading a new program while "__I40E_IN_REMOVE" is set. Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP callback to avoid unnecessary operations and checks. |
| CVE-2024-41046 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: lantiq_etop: fix double free in detach The number of the currently released descriptor is never incremented which results in the same skb being released multiple times. |
| CVE-2024-41045 | In the Linux kernel, the following vulnerability has been resolved: bpf: Defer work in bpf_timer_cancel_and_free Currently, the same case as previous patch (two timer callbacks trying to cancel each other) can be invoked through bpf_map_update_elem as well, or more precisely, freeing map elements containing timers. Since this relies on hrtimer_cancel as well, it is prone to the same deadlock situation as the previous patch. It would be sufficient to use hrtimer_try_to_cancel to fix this problem, as the timer cannot be enqueued after async_cancel_and_free. Once async_cancel_and_free has been done, the timer must be reinitialized before it can be armed again. The callback running in parallel trying to arm the timer will fail, and freeing bpf_hrtimer without waiting is sufficient (given kfree_rcu), and bpf_timer_cb will return HRTIMER_NORESTART, preventing the timer from being rearmed again. However, there exists a UAF scenario where the callback arms the timer before entering this function, such that if cancellation fails (due to timer callback invoking this routine, or the target timer callback running concurrently). In such a case, if the timer expiration is significantly far in the future, the RCU grace period expiration happening before it will free the bpf_hrtimer state and along with it the struct hrtimer, that is enqueued. Hence, it is clear cancellation needs to occur after async_cancel_and_free, and yet it cannot be done inline due to deadlock issues. We thus modify bpf_timer_cancel_and_free to defer work to the global workqueue, adding a work_struct alongside rcu_head (both used at _different_ points of time, so can share space). Update existing code comments to reflect the new state of affairs. |
| CVE-2024-41044 | In the Linux kernel, the following vulnerability has been resolved: ppp: reject claimed-as-LCP but actually malformed packets Since 'ppp_async_encode()' assumes valid LCP packets (with code from 1 to 7 inclusive), add 'ppp_check_packet()' to ensure that LCP packet has an actual body beyond PPP_LCP header bytes, and reject claimed-as-LCP but actually malformed data otherwise. |
| CVE-2024-41043 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: drop bogus WARN_ON Happens when rules get flushed/deleted while packet is out, so remove this WARN_ON. This WARN exists in one form or another since v4.14, no need to backport this to older releases, hence use a more recent fixes tag. |
| CVE-2024-41042 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: prefer nft_chain_validate nft_chain_validate already performs loop detection because a cycle will result in a call stack overflow (ctx->level >= NFT_JUMP_STACK_SIZE). It also follows maps via ->validate callback in nft_lookup, so there appears no reason to iterate the maps again. nf_tables_check_loops() and all its helper functions can be removed. This improves ruleset load time significantly, from 23s down to 12s. This also fixes a crash bug. Old loop detection code can result in unbounded recursion: BUG: TASK stack guard page was hit at .... Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN CPU: 4 PID: 1539 Comm: nft Not tainted 6.10.0-rc5+ #1 [..] with a suitable ruleset during validation of register stores. I can't see any actual reason to attempt to check for this from nft_validate_register_store(), at this point the transaction is still in progress, so we don't have a full picture of the rule graph. For nf-next it might make sense to either remove it or make this depend on table->validate_state in case we could catch an error earlier (for improved error reporting to userspace). |
| CVE-2024-41041 | In the Linux kernel, the following vulnerability has been resolved: udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port(). syzkaller triggered the warning [0] in udp_v4_early_demux(). In udp_v[46]_early_demux() and sk_lookup(), we do not touch the refcount of the looked-up sk and use sock_pfree() as skb->destructor, so we check SOCK_RCU_FREE to ensure that the sk is safe to access during the RCU grace period. Currently, SOCK_RCU_FREE is flagged for a bound socket after being put into the hash table. Moreover, the SOCK_RCU_FREE check is done too early in udp_v[46]_early_demux() and sk_lookup(), so there could be a small race window: CPU1 CPU2 ---- ---- udp_v4_early_demux() udp_lib_get_port() | |- hlist_add_head_rcu() |- sk = __udp4_lib_demux_lookup() | |- DEBUG_NET_WARN_ON_ONCE(sk_is_refcounted(sk)); `- sock_set_flag(sk, SOCK_RCU_FREE) We had the same bug in TCP and fixed it in commit 871019b22d1b ("net: set SOCK_RCU_FREE before inserting socket into hashtable"). Let's apply the same fix for UDP. [0]: WARNING: CPU: 0 PID: 11198 at net/ipv4/udp.c:2599 udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599 Modules linked in: CPU: 0 PID: 11198 Comm: syz-executor.1 Not tainted 6.9.0-g93bda33046e7 #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599 Code: c5 7a 15 fe bb 01 00 00 00 44 89 e9 31 ff d3 e3 81 e3 bf ef ff ff 89 de e8 2c 74 15 fe 85 db 0f 85 02 06 00 00 e8 9f 7a 15 fe <0f> 0b e8 98 7a 15 fe 49 8d 7e 60 e8 4f 39 2f fe 49 c7 46 60 20 52 RSP: 0018:ffffc9000ce3fa58 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8318c92c RDX: ffff888036ccde00 RSI: ffffffff8318c2f1 RDI: 0000000000000001 RBP: ffff88805a2dd6e0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0001ffffffffffff R12: ffff88805a2dd680 R13: 0000000000000007 R14: ffff88800923f900 R15: ffff88805456004e FS: 00007fc449127640(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc449126e38 CR3: 000000003de4b002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ip_rcv_finish_core.constprop.0+0xbdd/0xd20 net/ipv4/ip_input.c:349 ip_rcv_finish+0xda/0x150 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip_rcv+0x16c/0x180 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core+0xb3/0xe0 net/core/dev.c:5624 __netif_receive_skb+0x21/0xd0 net/core/dev.c:5738 netif_receive_skb_internal net/core/dev.c:5824 [inline] netif_receive_skb+0x271/0x300 net/core/dev.c:5884 tun_rx_batched drivers/net/tun.c:1549 [inline] tun_get_user+0x24db/0x2c50 drivers/net/tun.c:2002 tun_chr_write_iter+0x107/0x1a0 drivers/net/tun.c:2048 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x76f/0x8d0 fs/read_write.c:590 ksys_write+0xbf/0x190 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x41/0x50 fs/read_write.c:652 x64_sys_call+0xe66/0x1990 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4b/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fc44a68bc1f Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 e9 cf f5 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 3c d0 f5 ff 48 RSP: 002b:00007fc449126c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004bc050 RCX: 00007fc44a68bc1f R ---truncated--- |
| CVE-2024-41040 | In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix UAF when resolving a clash KASAN reports the following UAF: BUG: KASAN: slab-use-after-free in tcf_ct_flow_table_process_conn+0x12b/0x380 [act_ct] Read of size 1 at addr ffff888c07603600 by task handler130/6469 Call Trace: <IRQ> dump_stack_lvl+0x48/0x70 print_address_description.constprop.0+0x33/0x3d0 print_report+0xc0/0x2b0 kasan_report+0xd0/0x120 __asan_load1+0x6c/0x80 tcf_ct_flow_table_process_conn+0x12b/0x380 [act_ct] tcf_ct_act+0x886/0x1350 [act_ct] tcf_action_exec+0xf8/0x1f0 fl_classify+0x355/0x360 [cls_flower] __tcf_classify+0x1fd/0x330 tcf_classify+0x21c/0x3c0 sch_handle_ingress.constprop.0+0x2c5/0x500 __netif_receive_skb_core.constprop.0+0xb25/0x1510 __netif_receive_skb_list_core+0x220/0x4c0 netif_receive_skb_list_internal+0x446/0x620 napi_complete_done+0x157/0x3d0 gro_cell_poll+0xcf/0x100 __napi_poll+0x65/0x310 net_rx_action+0x30c/0x5c0 __do_softirq+0x14f/0x491 __irq_exit_rcu+0x82/0xc0 irq_exit_rcu+0xe/0x20 common_interrupt+0xa1/0xb0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 Allocated by task 6469: kasan_save_stack+0x38/0x70 kasan_set_track+0x25/0x40 kasan_save_alloc_info+0x1e/0x40 __kasan_krealloc+0x133/0x190 krealloc+0xaa/0x130 nf_ct_ext_add+0xed/0x230 [nf_conntrack] tcf_ct_act+0x1095/0x1350 [act_ct] tcf_action_exec+0xf8/0x1f0 fl_classify+0x355/0x360 [cls_flower] __tcf_classify+0x1fd/0x330 tcf_classify+0x21c/0x3c0 sch_handle_ingress.constprop.0+0x2c5/0x500 __netif_receive_skb_core.constprop.0+0xb25/0x1510 __netif_receive_skb_list_core+0x220/0x4c0 netif_receive_skb_list_internal+0x446/0x620 napi_complete_done+0x157/0x3d0 gro_cell_poll+0xcf/0x100 __napi_poll+0x65/0x310 net_rx_action+0x30c/0x5c0 __do_softirq+0x14f/0x491 Freed by task 6469: kasan_save_stack+0x38/0x70 kasan_set_track+0x25/0x40 kasan_save_free_info+0x2b/0x60 ____kasan_slab_free+0x180/0x1f0 __kasan_slab_free+0x12/0x30 slab_free_freelist_hook+0xd2/0x1a0 __kmem_cache_free+0x1a2/0x2f0 kfree+0x78/0x120 nf_conntrack_free+0x74/0x130 [nf_conntrack] nf_ct_destroy+0xb2/0x140 [nf_conntrack] __nf_ct_resolve_clash+0x529/0x5d0 [nf_conntrack] nf_ct_resolve_clash+0xf6/0x490 [nf_conntrack] __nf_conntrack_confirm+0x2c6/0x770 [nf_conntrack] tcf_ct_act+0x12ad/0x1350 [act_ct] tcf_action_exec+0xf8/0x1f0 fl_classify+0x355/0x360 [cls_flower] __tcf_classify+0x1fd/0x330 tcf_classify+0x21c/0x3c0 sch_handle_ingress.constprop.0+0x2c5/0x500 __netif_receive_skb_core.constprop.0+0xb25/0x1510 __netif_receive_skb_list_core+0x220/0x4c0 netif_receive_skb_list_internal+0x446/0x620 napi_complete_done+0x157/0x3d0 gro_cell_poll+0xcf/0x100 __napi_poll+0x65/0x310 net_rx_action+0x30c/0x5c0 __do_softirq+0x14f/0x491 The ct may be dropped if a clash has been resolved but is still passed to the tcf_ct_flow_table_process_conn function for further usage. This issue can be fixed by retrieving ct from skb again after confirming conntrack. |
| CVE-2024-41039 | In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix overflow checking of wmfw header Fix the checking that firmware file buffer is large enough for the wmfw header, to prevent overrunning the buffer. The original code tested that the firmware data buffer contained enough bytes for the sums of the size of the structs wmfw_header + wmfw_adsp1_sizes + wmfw_footer But wmfw_adsp1_sizes is only used on ADSP1 firmware. For ADSP2 and Halo Core the equivalent struct is wmfw_adsp2_sizes, which is 4 bytes longer. So the length check didn't guarantee that there are enough bytes in the firmware buffer for a header with wmfw_adsp2_sizes. This patch splits the length check into three separate parts. Each of the wmfw_header, wmfw_adsp?_sizes and wmfw_footer are checked separately before they are used. |
| CVE-2024-41038 | In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers Check that all fields of a V2 algorithm header fit into the available firmware data buffer. The wmfw V2 format introduced variable-length strings in the algorithm block header. This means the overall header length is variable, and the position of most fields varies depending on the length of the string fields. Each field must be checked to ensure that it does not overflow the firmware data buffer. As this ia bugfix patch, the fixes avoid making any significant change to the existing code. This makes it easier to review and less likely to introduce new bugs. |
| CVE-2024-41037 | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: fix null deref on system suspend entry When system enters suspend with an active stream, SOF core calls hw_params_upon_resume(). On Intel platforms with HDA DMA used to manage the link DMA, this leads to call chain of hda_dsp_set_hw_params_upon_resume() -> hda_dsp_dais_suspend() -> hda_dai_suspend() -> hda_ipc4_post_trigger() A bug is hit in hda_dai_suspend() as hda_link_dma_cleanup() is run first, which clears hext_stream->link_substream, and then hda_ipc4_post_trigger() is called with a NULL snd_pcm_substream pointer. |
| CVE-2024-41036 | In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Fix deadlock with the SPI chip variant When SMP is enabled and spinlocks are actually functional then there is a deadlock with the 'statelock' spinlock between ks8851_start_xmit_spi and ks8851_irq: watchdog: BUG: soft lockup - CPU#0 stuck for 27s! call trace: queued_spin_lock_slowpath+0x100/0x284 do_raw_spin_lock+0x34/0x44 ks8851_start_xmit_spi+0x30/0xb8 ks8851_start_xmit+0x14/0x20 netdev_start_xmit+0x40/0x6c dev_hard_start_xmit+0x6c/0xbc sch_direct_xmit+0xa4/0x22c __qdisc_run+0x138/0x3fc qdisc_run+0x24/0x3c net_tx_action+0xf8/0x130 handle_softirqs+0x1ac/0x1f0 __do_softirq+0x14/0x20 ____do_softirq+0x10/0x1c call_on_irq_stack+0x3c/0x58 do_softirq_own_stack+0x1c/0x28 __irq_exit_rcu+0x54/0x9c irq_exit_rcu+0x10/0x1c el1_interrupt+0x38/0x50 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x64/0x68 __netif_schedule+0x6c/0x80 netif_tx_wake_queue+0x38/0x48 ks8851_irq+0xb8/0x2c8 irq_thread_fn+0x2c/0x74 irq_thread+0x10c/0x1b0 kthread+0xc8/0xd8 ret_from_fork+0x10/0x20 This issue has not been identified earlier because tests were done on a device with SMP disabled and so spinlocks were actually NOPs. Now use spin_(un)lock_bh for TX queue related locking to avoid execution of softirq work synchronously that would lead to a deadlock. |
| CVE-2024-41035 | In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor Syzbot has identified a bug in usbcore (see the Closes: tag below) caused by our assumption that the reserved bits in an endpoint descriptor's bEndpointAddress field will always be 0. As a result of the bug, the endpoint_is_duplicate() routine in config.c (and possibly other routines as well) may believe that two descriptors are for distinct endpoints, even though they have the same direction and endpoint number. This can lead to confusion, including the bug identified by syzbot (two descriptors with matching endpoint numbers and directions, where one was interrupt and the other was bulk). To fix the bug, we will clear the reserved bits in bEndpointAddress when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1 specs say these bits are "Reserved, reset to zero".) This requires us to make a copy of the descriptor earlier in usb_parse_endpoint() and use the copy instead of the original when checking for duplicates. |
| CVE-2024-41034 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug on rename operation of broken directory Syzbot reported that in rename directory operation on broken directory on nilfs2, __block_write_begin_int() called to prepare block write may fail BUG_ON check for access exceeding the folio/page size. This is because nilfs_dotdot(), which gets parent directory reference entry ("..") of the directory to be moved or renamed, does not check consistency enough, and may return location exceeding folio/page size for broken directories. Fix this issue by checking required directory entries ("." and "..") in the first chunk of the directory in nilfs_dotdot(). |
| CVE-2024-41033 | In the Linux kernel, the following vulnerability has been resolved: cachestat: do not flush stats in recency check syzbot detects that cachestat() is flushing stats, which can sleep, in its RCU read section (see [1]). This is done in the workingset_test_recent() step (which checks if the folio's eviction is recent). Move the stat flushing step to before the RCU read section of cachestat, and skip stat flushing during the recency check. [1]: https://lore.kernel.org/cgroups/[email protected]/ |
| CVE-2024-41032 | In the Linux kernel, the following vulnerability has been resolved: mm: vmalloc: check if a hash-index is in cpu_possible_mask The problem is that there are systems where cpu_possible_mask has gaps between set CPUs, for example SPARC. In this scenario addr_to_vb_xa() hash function can return an index which accesses to not-possible and not setup CPU area using per_cpu() macro. This results in an oops on SPARC. A per-cpu vmap_block_queue is also used as hash table, incorrectly assuming the cpu_possible_mask has no gaps. Fix it by adjusting an index to a next possible CPU. |
| CVE-2024-41031 | In the Linux kernel, the following vulnerability has been resolved: mm/filemap: skip to create PMD-sized page cache if needed On ARM64, HPAGE_PMD_ORDER is 13 when the base page size is 64KB. The PMD-sized page cache can't be supported by xarray as the following error messages indicate. ------------[ cut here ]------------ WARNING: CPU: 35 PID: 7484 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm \ fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ sha1_ce virtio_net net_failover virtio_console virtio_blk failover \ dimlib virtio_mmio CPU: 35 PID: 7484 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff800087a4f6c0 x29: ffff800087a4f6c0 x28: ffff800087a4f720 x27: 000000001fffffff x26: 0000000000000c40 x25: 000000000000000d x24: ffff00010625b858 x23: ffff800087a4f720 x22: ffffffdfc0780000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0780000 x18: 000000001ff40000 x17: 00000000ffffffff x16: 0000018000000000 x15: 51ec004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 51ec000000000000 x10: 51ece1c0ffff8000 x9 : ffffbeb961a44d28 x8 : 0000000000000003 x7 : ffffffdfc0456420 x6 : ffff0000e1aa6eb8 x5 : 20bf08b4fe778fca x4 : ffffffdfc0456420 x3 : 0000000000000c40 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 truncate_inode_pages_range+0x1b4/0x4a8 truncate_pagecache_range+0x84/0xa0 xfs_flush_unmap_range+0x70/0x90 [xfs] xfs_file_fallocate+0xfc/0x4d8 [xfs] vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Fix it by skipping to allocate PMD-sized page cache when its size is larger than MAX_PAGECACHE_ORDER. For this specific case, we will fall to regular path where the readahead window is determined by BDI's sysfs file (read_ahead_kb). |
| CVE-2024-41030 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: discard write access to the directory open may_open() does not allow a directory to be opened with the write access. However, some writing flags set by client result in adding write access on server, making ksmbd incompatible with FUSE file system. Simply, let's discard the write access when opening a directory. list_add corruption. next is NULL. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:26! pc : __list_add_valid+0x88/0xbc lr : __list_add_valid+0x88/0xbc Call trace: __list_add_valid+0x88/0xbc fuse_finish_open+0x11c/0x170 fuse_open_common+0x284/0x5e8 fuse_dir_open+0x14/0x24 do_dentry_open+0x2a4/0x4e0 dentry_open+0x50/0x80 smb2_open+0xbe4/0x15a4 handle_ksmbd_work+0x478/0x5ec process_one_work+0x1b4/0x448 worker_thread+0x25c/0x430 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20 |
| CVE-2024-41029 | In the Linux kernel, the following vulnerability has been resolved: nvmem: core: limit cell sysfs permissions to main attribute ones The cell sysfs attribute should not provide more access to the nvmem data than the main attribute itself. For example if nvme_config::root_only was set, the cell attribute would still provide read access to everybody. Mask out permissions not available on the main attribute. |
| CVE-2024-41028 | In the Linux kernel, the following vulnerability has been resolved: platform/x86: toshiba_acpi: Fix array out-of-bounds access In order to use toshiba_dmi_quirks[] together with the standard DMI matching functions, it must be terminated by a empty entry. Since this entry is missing, an array out-of-bounds access occurs every time the quirk list is processed. Fix this by adding the terminating empty entry. |
| CVE-2024-41027 | In the Linux kernel, the following vulnerability has been resolved: Fix userfaultfd_api to return EINVAL as expected Currently if we request a feature that is not set in the Kernel config we fail silently and return all the available features. However, the man page indicates we should return an EINVAL. We need to fix this issue since we can end up with a Kernel warning should a program request the feature UFFD_FEATURE_WP_UNPOPULATED on a kernel with the config not set with this feature. [ 200.812896] WARNING: CPU: 91 PID: 13634 at mm/memory.c:1660 zap_pte_range+0x43d/0x660 [ 200.820738] Modules linked in: [ 200.869387] CPU: 91 PID: 13634 Comm: userfaultfd Kdump: loaded Not tainted 6.9.0-rc5+ #8 [ 200.877477] Hardware name: Dell Inc. PowerEdge R6525/0N7YGH, BIOS 2.7.3 03/30/2022 [ 200.885052] RIP: 0010:zap_pte_range+0x43d/0x660 |
| CVE-2024-41026 | In the Linux kernel, the following vulnerability has been resolved: mmc: davinci_mmc: Prevent transmitted data size from exceeding sgm's length No check is done on the size of the data to be transmiited. This causes a kernel panic when this size exceeds the sg_miter's length. Limit the number of transmitted bytes to sgm->length. |
| CVE-2024-41025 | In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix memory leak in audio daemon attach operation Audio PD daemon send the name as part of the init IOCTL call. This name needs to be copied to kernel for which memory is allocated. This memory is never freed which might result in memory leak. Free the memory when it is not needed. |
| CVE-2024-41024 | In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Restrict untrusted app to attach to privileged PD Untrusted application with access to only non-secure fastrpc device node can attach to root_pd or static PDs if it can make the respective init request. This can cause problems as the untrusted application can send bad requests to root_pd or static PDs. Add changes to reject attach to privileged PDs if the request is being made using non-secure fastrpc device node. |
| CVE-2024-41023 | In the Linux kernel, the following vulnerability has been resolved: sched/deadline: Fix task_struct reference leak During the execution of the following stress test with linux-rt: stress-ng --cyclic 30 --timeout 30 --minimize --quiet kmemleak frequently reported a memory leak concerning the task_struct: unreferenced object 0xffff8881305b8000 (size 16136): comm "stress-ng", pid 614, jiffies 4294883961 (age 286.412s) object hex dump (first 32 bytes): 02 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ debug hex dump (first 16 bytes): 53 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 S............... backtrace: [<00000000046b6790>] dup_task_struct+0x30/0x540 [<00000000c5ca0f0b>] copy_process+0x3d9/0x50e0 [<00000000ced59777>] kernel_clone+0xb0/0x770 [<00000000a50befdc>] __do_sys_clone+0xb6/0xf0 [<000000001dbf2008>] do_syscall_64+0x5d/0xf0 [<00000000552900ff>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 The issue occurs in start_dl_timer(), which increments the task_struct reference count and sets a timer. The timer callback, dl_task_timer, is supposed to decrement the reference count upon expiration. However, if enqueue_task_dl() is called before the timer expires and cancels it, the reference count is not decremented, leading to the leak. This patch fixes the reference leak by ensuring the task_struct reference count is properly decremented when the timer is canceled. |
| CVE-2024-41022 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq() The "instance" variable needs to be signed for the error handling to work. |
| CVE-2024-41021 | In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception() There is no support for HWPOISON, MEMORY_FAILURE, or ARCH_HAS_COPY_MC on s390. Therefore we do not expect to see VM_FAULT_HWPOISON in do_exception(). However, since commit af19487f00f3 ("mm: make PTE_MARKER_SWAPIN_ERROR more general"), it is possible to see VM_FAULT_HWPOISON in combination with PTE_MARKER_POISONED, even on architectures that do not support HWPOISON otherwise. In this case, we will end up on the BUG() in do_exception(). Fix this by treating VM_FAULT_HWPOISON the same as VM_FAULT_SIGBUS, similar to x86 when MEMORY_FAILURE is not configured. Also print unexpected fault flags, for easier debugging. Note that VM_FAULT_HWPOISON_LARGE is not expected, because s390 cannot support swap entries on other levels than PTE level. |
| CVE-2024-41020 | In the Linux kernel, the following vulnerability has been resolved: filelock: Fix fcntl/close race recovery compat path When I wrote commit 3cad1bc01041 ("filelock: Remove locks reliably when fcntl/close race is detected"), I missed that there are two copies of the code I was patching: The normal version, and the version for 64-bit offsets on 32-bit kernels. Thanks to Greg KH for stumbling over this while doing the stable backport... Apply exactly the same fix to the compat path for 32-bit kernels. |
| CVE-2024-41019 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Validate ff offset This adds sanity checks for ff offset. There is a check on rt->first_free at first, but walking through by ff without any check. If the second ff is a large offset. We may encounter an out-of-bound read. |
| CVE-2024-41018 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add a check for attr_names and oatbl Added out-of-bound checking for *ane (ATTR_NAME_ENTRY). |
| CVE-2024-41017 | In the Linux kernel, the following vulnerability has been resolved: jfs: don't walk off the end of ealist Add a check before visiting the members of ea to make sure each ea stays within the ealist. |
| CVE-2024-41016 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry() xattr in ocfs2 maybe 'non-indexed', which saved with additional space requested. It's better to check if the memory is out of bound before memcmp, although this possibility mainly comes from crafted poisonous images. |
| CVE-2024-41015 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: add bounds checking to ocfs2_check_dir_entry() This adds sanity checks for ocfs2_dir_entry to make sure all members of ocfs2_dir_entry don't stray beyond valid memory region. |
| CVE-2024-41014 | In the Linux kernel, the following vulnerability has been resolved: xfs: add bounds checking to xlog_recover_process_data There is a lack of verification of the space occupied by fixed members of xlog_op_header in the xlog_recover_process_data. We can create a crafted image to trigger an out of bounds read by following these steps: 1) Mount an image of xfs, and do some file operations to leave records 2) Before umounting, copy the image for subsequent steps to simulate abnormal exit. Because umount will ensure that tail_blk and head_blk are the same, which will result in the inability to enter xlog_recover_process_data 3) Write a tool to parse and modify the copied image in step 2 4) Make the end of the xlog_op_header entries only 1 byte away from xlog_rec_header->h_size 5) xlog_rec_header->h_num_logops++ 6) Modify xlog_rec_header->h_crc Fix: Add a check to make sure there is sufficient space to access fixed members of xlog_op_header. |
| CVE-2024-41013 | In the Linux kernel, the following vulnerability has been resolved: xfs: don't walk off the end of a directory data block This adds sanity checks for xfs_dir2_data_unused and xfs_dir2_data_entry to make sure don't stray beyond valid memory region. Before patching, the loop simply checks that the start offset of the dup and dep is within the range. So in a crafted image, if last entry is xfs_dir2_data_unused, we can change dup->length to dup->length-1 and leave 1 byte of space. In the next traversal, this space will be considered as dup or dep. We may encounter an out of bound read when accessing the fixed members. In the patch, we make sure that the remaining bytes large enough to hold an unused entry before accessing xfs_dir2_data_unused and xfs_dir2_data_unused is XFS_DIR2_DATA_ALIGN byte aligned. We also make sure that the remaining bytes large enough to hold a dirent with a single-byte name before accessing xfs_dir2_data_entry. |
| CVE-2024-41012 | In the Linux kernel, the following vulnerability has been resolved: filelock: Remove locks reliably when fcntl/close race is detected When fcntl_setlk() races with close(), it removes the created lock with do_lock_file_wait(). However, LSMs can allow the first do_lock_file_wait() that created the lock while denying the second do_lock_file_wait() that tries to remove the lock. Separately, posix_lock_file() could also fail to remove a lock due to GFP_KERNEL allocation failure (when splitting a range in the middle). After the bug has been triggered, use-after-free reads will occur in lock_get_status() when userspace reads /proc/locks. This can likely be used to read arbitrary kernel memory, but can't corrupt kernel memory. Fix it by calling locks_remove_posix() instead, which is designed to reliably get rid of POSIX locks associated with the given file and files_struct and is also used by filp_flush(). |
| CVE-2024-41011 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: don't allow mapping the MMIO HDP page with large pages We don't get the right offset in that case. The GPU has an unused 4K area of the register BAR space into which you can remap registers. We remap the HDP flush registers into this space to allow userspace (CPU or GPU) to flush the HDP when it updates VRAM. However, on systems with >4K pages, we end up exposing PAGE_SIZE of MMIO space. |
| CVE-2024-41010 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix too early release of tcx_entry Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported an issue that the tcx_entry can be released too early leading to a use after free (UAF) when an active old-style ingress or clsact qdisc with a shared tc block is later replaced by another ingress or clsact instance. Essentially, the sequence to trigger the UAF (one example) can be as follows: 1. A network namespace is created 2. An ingress qdisc is created. This allocates a tcx_entry, and &tcx_entry->miniq is stored in the qdisc's miniqp->p_miniq. At the same time, a tcf block with index 1 is created. 3. chain0 is attached to the tcf block. chain0 must be connected to the block linked to the ingress qdisc to later reach the function tcf_chain0_head_change_cb_del() which triggers the UAF. 4. Create and graft a clsact qdisc. This causes the ingress qdisc created in step 1 to be removed, thus freeing the previously linked tcx_entry: rtnetlink_rcv_msg() => tc_modify_qdisc() => qdisc_create() => clsact_init() [a] => qdisc_graft() => qdisc_destroy() => __qdisc_destroy() => ingress_destroy() [b] => tcx_entry_free() => kfree_rcu() // tcx_entry freed 5. Finally, the network namespace is closed. This registers the cleanup_net worker, and during the process of releasing the remaining clsact qdisc, it accesses the tcx_entry that was already freed in step 4, causing the UAF to occur: cleanup_net() => ops_exit_list() => default_device_exit_batch() => unregister_netdevice_many() => unregister_netdevice_many_notify() => dev_shutdown() => qdisc_put() => clsact_destroy() [c] => tcf_block_put_ext() => tcf_chain0_head_change_cb_del() => tcf_chain_head_change_item() => clsact_chain_head_change() => mini_qdisc_pair_swap() // UAF There are also other variants, the gist is to add an ingress (or clsact) qdisc with a specific shared block, then to replace that qdisc, waiting for the tcx_entry kfree_rcu() to be executed and subsequently accessing the current active qdisc's miniq one way or another. The correct fix is to turn the miniq_active boolean into a counter. What can be observed, at step 2 above, the counter transitions from 0->1, at step [a] from 1->2 (in order for the miniq object to remain active during the replacement), then in [b] from 2->1 and finally [c] 1->0 with the eventual release. The reference counter in general ranges from [0,2] and it does not need to be atomic since all access to the counter is protected by the rtnl mutex. With this in place, there is no longer a UAF happening and the tcx_entry is freed at the correct time. |
| CVE-2024-41009 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overrunning reservations in ringbuf The BPF ring buffer internally is implemented as a power-of-2 sized circular buffer, with two logical and ever-increasing counters: consumer_pos is the consumer counter to show which logical position the consumer consumed the data, and producer_pos which is the producer counter denoting the amount of data reserved by all producers. Each time a record is reserved, the producer that "owns" the record will successfully advance producer counter. In user space each time a record is read, the consumer of the data advanced the consumer counter once it finished processing. Both counters are stored in separate pages so that from user space, the producer counter is read-only and the consumer counter is read-write. One aspect that simplifies and thus speeds up the implementation of both producers and consumers is how the data area is mapped twice contiguously back-to-back in the virtual memory, allowing to not take any special measures for samples that have to wrap around at the end of the circular buffer data area, because the next page after the last data page would be first data page again, and thus the sample will still appear completely contiguous in virtual memory. Each record has a struct bpf_ringbuf_hdr { u32 len; u32 pg_off; } header for book-keeping the length and offset, and is inaccessible to the BPF program. Helpers like bpf_ringbuf_reserve() return `(void *)hdr + BPF_RINGBUF_HDR_SZ` for the BPF program to use. Bing-Jhong and Muhammad reported that it is however possible to make a second allocated memory chunk overlapping with the first chunk and as a result, the BPF program is now able to edit first chunk's header. For example, consider the creation of a BPF_MAP_TYPE_RINGBUF map with size of 0x4000. Next, the consumer_pos is modified to 0x3000 /before/ a call to bpf_ringbuf_reserve() is made. This will allocate a chunk A, which is in [0x0,0x3008], and the BPF program is able to edit [0x8,0x3008]. Now, lets allocate a chunk B with size 0x3000. This will succeed because consumer_pos was edited ahead of time to pass the `new_prod_pos - cons_pos > rb->mask` check. Chunk B will be in range [0x3008,0x6010], and the BPF program is able to edit [0x3010,0x6010]. Due to the ring buffer memory layout mentioned earlier, the ranges [0x0,0x4000] and [0x4000,0x8000] point to the same data pages. This means that chunk B at [0x4000,0x4008] is chunk A's header. bpf_ringbuf_submit() / bpf_ringbuf_discard() use the header's pg_off to then locate the bpf_ringbuf itself via bpf_ringbuf_restore_from_rec(). Once chunk B modified chunk A's header, then bpf_ringbuf_commit() refers to the wrong page and could cause a crash. Fix it by calculating the oldest pending_pos and check whether the range from the oldest outstanding record to the newest would span beyond the ring buffer size. If that is the case, then reject the request. We've tested with the ring buffer benchmark in BPF selftests (./benchs/run_bench_ringbufs.sh) before/after the fix and while it seems a bit slower on some benchmarks, it is still not significantly enough to matter. |
| CVE-2024-41008 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: change vm->task_info handling This patch changes the handling and lifecycle of vm->task_info object. The major changes are: - vm->task_info is a dynamically allocated ptr now, and its uasge is reference counted. - introducing two new helper funcs for task_info lifecycle management - amdgpu_vm_get_task_info: reference counts up task_info before returning this info - amdgpu_vm_put_task_info: reference counts down task_info - last put to task_info() frees task_info from the vm. This patch also does logistical changes required for existing usage of vm->task_info. V2: Do not block all the prints when task_info not found (Felix) V3: Fixed review comments from Felix - Fix wrong indentation - No debug message for -ENOMEM - Add NULL check for task_info - Do not duplicate the debug messages (ti vs no ti) - Get first reference of task_info in vm_init(), put last in vm_fini() V4: Fixed review comments from Felix - fix double reference increment in create_task_info - change amdgpu_vm_get_task_info_pasid - additional changes in amdgpu_gem.c while porting |
| CVE-2024-41007 | In the Linux kernel, the following vulnerability has been resolved: tcp: avoid too many retransmit packets If a TCP socket is using TCP_USER_TIMEOUT, and the other peer retracted its window to zero, tcp_retransmit_timer() can retransmit a packet every two jiffies (2 ms for HZ=1000), for about 4 minutes after TCP_USER_TIMEOUT has 'expired'. The fix is to make sure tcp_rtx_probe0_timed_out() takes icsk->icsk_user_timeout into account. Before blamed commit, the socket would not timeout after icsk->icsk_user_timeout, but would use standard exponential backoff for the retransmits. Also worth noting that before commit e89688e3e978 ("net: tcp: fix unexcepted socket die when snd_wnd is 0"), the issue would last 2 minutes instead of 4. |
| CVE-2024-41006 | In the Linux kernel, the following vulnerability has been resolved: netrom: Fix a memory leak in nr_heartbeat_expiry() syzbot reported a memory leak in nr_create() [0]. Commit 409db27e3a2e ("netrom: Fix use-after-free of a listening socket.") added sock_hold() to the nr_heartbeat_expiry() function, where a) a socket has a SOCK_DESTROY flag or b) a listening socket has a SOCK_DEAD flag. But in the case "a," when the SOCK_DESTROY flag is set, the file descriptor has already been closed and the nr_release() function has been called. So it makes no sense to hold the reference count because no one will call another nr_destroy_socket() and put it as in the case "b." nr_connect nr_establish_data_link nr_start_heartbeat nr_release switch (nr->state) case NR_STATE_3 nr->state = NR_STATE_2 sock_set_flag(sk, SOCK_DESTROY); nr_rx_frame nr_process_rx_frame switch (nr->state) case NR_STATE_2 nr_state2_machine() nr_disconnect() nr_sk(sk)->state = NR_STATE_0 sock_set_flag(sk, SOCK_DEAD) nr_heartbeat_expiry switch (nr->state) case NR_STATE_0 if (sock_flag(sk, SOCK_DESTROY) || (sk->sk_state == TCP_LISTEN && sock_flag(sk, SOCK_DEAD))) sock_hold() // ( !!! ) nr_destroy_socket() To fix the memory leak, let's call sock_hold() only for a listening socket. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. [0]: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16 |
| CVE-2024-41005 | In the Linux kernel, the following vulnerability has been resolved: netpoll: Fix race condition in netpoll_owner_active KCSAN detected a race condition in netpoll: BUG: KCSAN: data-race in net_rx_action / netpoll_send_skb write (marked) to 0xffff8881164168b0 of 4 bytes by interrupt on cpu 10: net_rx_action (./include/linux/netpoll.h:90 net/core/dev.c:6712 net/core/dev.c:6822) <snip> read to 0xffff8881164168b0 of 4 bytes by task 1 on cpu 2: netpoll_send_skb (net/core/netpoll.c:319 net/core/netpoll.c:345 net/core/netpoll.c:393) netpoll_send_udp (net/core/netpoll.c:?) <snip> value changed: 0x0000000a -> 0xffffffff This happens because netpoll_owner_active() needs to check if the current CPU is the owner of the lock, touching napi->poll_owner non atomically. The ->poll_owner field contains the current CPU holding the lock. Use an atomic read to check if the poll owner is the current CPU. |
| CVE-2024-41004 | In the Linux kernel, the following vulnerability has been resolved: tracing: Build event generation tests only as modules The kprobes and synth event generation test modules add events and lock (get a reference) those event file reference in module init function, and unlock and delete it in module exit function. This is because those are designed for playing as modules. If we make those modules as built-in, those events are left locked in the kernel, and never be removed. This causes kprobe event self-test failure as below. [ 97.349708] ------------[ cut here ]------------ [ 97.353453] WARNING: CPU: 3 PID: 1 at kernel/trace/trace_kprobe.c:2133 kprobe_trace_self_tests_init+0x3f1/0x480 [ 97.357106] Modules linked in: [ 97.358488] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 6.9.0-g699646734ab5-dirty #14 [ 97.361556] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 97.363880] RIP: 0010:kprobe_trace_self_tests_init+0x3f1/0x480 [ 97.365538] Code: a8 24 08 82 e9 ae fd ff ff 90 0f 0b 90 48 c7 c7 e5 aa 0b 82 e9 ee fc ff ff 90 0f 0b 90 48 c7 c7 2d 61 06 82 e9 8e fd ff ff 90 <0f> 0b 90 48 c7 c7 33 0b 0c 82 89 c6 e8 6e 03 1f ff 41 ff c7 e9 90 [ 97.370429] RSP: 0000:ffffc90000013b50 EFLAGS: 00010286 [ 97.371852] RAX: 00000000fffffff0 RBX: ffff888005919c00 RCX: 0000000000000000 [ 97.373829] RDX: ffff888003f40000 RSI: ffffffff8236a598 RDI: ffff888003f40a68 [ 97.375715] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 97.377675] R10: ffffffff811c9ae5 R11: ffffffff8120c4e0 R12: 0000000000000000 [ 97.379591] R13: 0000000000000001 R14: 0000000000000015 R15: 0000000000000000 [ 97.381536] FS: 0000000000000000(0000) GS:ffff88807dcc0000(0000) knlGS:0000000000000000 [ 97.383813] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 97.385449] CR2: 0000000000000000 CR3: 0000000002244000 CR4: 00000000000006b0 [ 97.387347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 97.389277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 97.391196] Call Trace: [ 97.391967] <TASK> [ 97.392647] ? __warn+0xcc/0x180 [ 97.393640] ? kprobe_trace_self_tests_init+0x3f1/0x480 [ 97.395181] ? report_bug+0xbd/0x150 [ 97.396234] ? handle_bug+0x3e/0x60 [ 97.397311] ? exc_invalid_op+0x1a/0x50 [ 97.398434] ? asm_exc_invalid_op+0x1a/0x20 [ 97.399652] ? trace_kprobe_is_busy+0x20/0x20 [ 97.400904] ? tracing_reset_all_online_cpus+0x15/0x90 [ 97.402304] ? kprobe_trace_self_tests_init+0x3f1/0x480 [ 97.403773] ? init_kprobe_trace+0x50/0x50 [ 97.404972] do_one_initcall+0x112/0x240 [ 97.406113] do_initcall_level+0x95/0xb0 [ 97.407286] ? kernel_init+0x1a/0x1a0 [ 97.408401] do_initcalls+0x3f/0x70 [ 97.409452] kernel_init_freeable+0x16f/0x1e0 [ 97.410662] ? rest_init+0x1f0/0x1f0 [ 97.411738] kernel_init+0x1a/0x1a0 [ 97.412788] ret_from_fork+0x39/0x50 [ 97.413817] ? rest_init+0x1f0/0x1f0 [ 97.414844] ret_from_fork_asm+0x11/0x20 [ 97.416285] </TASK> [ 97.417134] irq event stamp: 13437323 [ 97.418376] hardirqs last enabled at (13437337): [<ffffffff8110bc0c>] console_unlock+0x11c/0x150 [ 97.421285] hardirqs last disabled at (13437370): [<ffffffff8110bbf1>] console_unlock+0x101/0x150 [ 97.423838] softirqs last enabled at (13437366): [<ffffffff8108e17f>] handle_softirqs+0x23f/0x2a0 [ 97.426450] softirqs last disabled at (13437393): [<ffffffff8108e346>] __irq_exit_rcu+0x66/0xd0 [ 97.428850] ---[ end trace 0000000000000000 ]--- And also, since we can not cleanup dynamic_event file, ftracetest are failed too. To avoid these issues, build these tests only as modules. |
| CVE-2024-41003 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix reg_set_min_max corruption of fake_reg Juan reported that after doing some changes to buzzer [0] and implementing a new fuzzing strategy guided by coverage, they noticed the following in one of the probes: [...] 13: (79) r6 = *(u64 *)(r0 +0) ; R0=map_value(ks=4,vs=8) R6_w=scalar() 14: (b7) r0 = 0 ; R0_w=0 15: (b4) w0 = -1 ; R0_w=0xffffffff 16: (74) w0 >>= 1 ; R0_w=0x7fffffff 17: (5c) w6 &= w0 ; R0_w=0x7fffffff R6_w=scalar(smin=smin32=0,smax=umax=umax32=0x7fffffff,var_off=(0x0; 0x7fffffff)) 18: (44) w6 |= 2 ; R6_w=scalar(smin=umin=smin32=umin32=2,smax=umax=umax32=0x7fffffff,var_off=(0x2; 0x7ffffffd)) 19: (56) if w6 != 0x7ffffffd goto pc+1 REG INVARIANTS VIOLATION (true_reg2): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0) REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0) REG INVARIANTS VIOLATION (false_reg2): const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] u32=[0x0, 0xffffffff] s32=[0x80000000, 0x7fffffff] var_off=(0x7fffffff, 0x0) 19: R6_w=0x7fffffff 20: (95) exit from 19 to 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 21: (14) w6 -= 2147483632 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=14,var_off=(0x2; 0xfffffffd)) 22: (76) if w6 s>= 0xe goto pc+1 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=13,var_off=(0x2; 0xfffffffd)) 23: (95) exit from 22 to 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 24: (14) w6 -= 14 ; R6_w=0 [...] What can be seen here is a register invariant violation on line 19. After the binary-or in line 18, the verifier knows that bit 2 is set but knows nothing about the rest of the content which was loaded from a map value, meaning, range is [2,0x7fffffff] with var_off=(0x2; 0x7ffffffd). When in line 19 the verifier analyzes the branch, it splits the register states in reg_set_min_max() into the registers of the true branch (true_reg1, true_reg2) and the registers of the false branch (false_reg1, false_reg2). Since the test is w6 != 0x7ffffffd, the src_reg is a known constant. Internally, the verifier creates a "fake" register initialized as scalar to the value of 0x7ffffffd, and then passes it onto reg_set_min_max(). Now, for line 19, it is mathematically impossible to take the false branch of this program, yet the verifier analyzes it. It is impossible because the second bit of r6 will be set due to the prior or operation and the constant in the condition has that bit unset (hex(fd) == binary(1111 1101). When the verifier first analyzes the false / fall-through branch, it will compute an intersection between the var_off of r6 and of the constant. This is because the verifier creates a "fake" register initialized to the value of the constant. The intersection result later refines both registers in regs_refine_cond_op(): [...] t = tnum_intersect(tnum_subreg(reg1->var_off), tnum_subreg(reg2->var_off)); reg1->var_o ---truncated--- |
| CVE-2024-41002 | In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/sec - Fix memory leak for sec resource release The AIV is one of the SEC resources. When releasing resources, it need to release the AIV resources at the same time. Otherwise, memory leakage occurs. The aiv resource release is added to the sec resource release function. |
| CVE-2024-41001 | In the Linux kernel, the following vulnerability has been resolved: io_uring/sqpoll: work around a potential audit memory leak kmemleak complains that there's a memory leak related to connect handling: unreferenced object 0xffff0001093bdf00 (size 128): comm "iou-sqp-455", pid 457, jiffies 4294894164 hex dump (first 32 bytes): 02 00 fa ea 7f 00 00 01 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 2e481b1a): [<00000000c0a26af4>] kmemleak_alloc+0x30/0x38 [<000000009c30bb45>] kmalloc_trace+0x228/0x358 [<000000009da9d39f>] __audit_sockaddr+0xd0/0x138 [<0000000089a93e34>] move_addr_to_kernel+0x1a0/0x1f8 [<000000000b4e80e6>] io_connect_prep+0x1ec/0x2d4 [<00000000abfbcd99>] io_submit_sqes+0x588/0x1e48 [<00000000e7c25e07>] io_sq_thread+0x8a4/0x10e4 [<00000000d999b491>] ret_from_fork+0x10/0x20 which can can happen if: 1) The command type does something on the prep side that triggers an audit call. 2) The thread hasn't done any operations before this that triggered an audit call inside ->issue(), where we have audit_uring_entry() and audit_uring_exit(). Work around this by issuing a blanket NOP operation before the SQPOLL does anything. |
| CVE-2024-41000 | In the Linux kernel, the following vulnerability has been resolved: block/ioctl: prefer different overflow check Running syzkaller with the newly reintroduced signed integer overflow sanitizer shows this report: [ 62.982337] ------------[ cut here ]------------ [ 62.985692] cgroup: Invalid name [ 62.986211] UBSAN: signed-integer-overflow in ../block/ioctl.c:36:46 [ 62.989370] 9pnet_fd: p9_fd_create_tcp (7343): problem connecting socket to 127.0.0.1 [ 62.992992] 9223372036854775807 + 4095 cannot be represented in type 'long long' [ 62.997827] 9pnet_fd: p9_fd_create_tcp (7345): problem connecting socket to 127.0.0.1 [ 62.999369] random: crng reseeded on system resumption [ 63.000634] GUP no longer grows the stack in syz-executor.2 (7353): 20002000-20003000 (20001000) [ 63.000668] CPU: 0 PID: 7353 Comm: syz-executor.2 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1 [ 63.000677] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 63.000682] Call Trace: [ 63.000686] <TASK> [ 63.000731] dump_stack_lvl+0x93/0xd0 [ 63.000919] __get_user_pages+0x903/0xd30 [ 63.001030] __gup_longterm_locked+0x153e/0x1ba0 [ 63.001041] ? _raw_read_unlock_irqrestore+0x17/0x50 [ 63.001072] ? try_get_folio+0x29c/0x2d0 [ 63.001083] internal_get_user_pages_fast+0x1119/0x1530 [ 63.001109] iov_iter_extract_pages+0x23b/0x580 [ 63.001206] bio_iov_iter_get_pages+0x4de/0x1220 [ 63.001235] iomap_dio_bio_iter+0x9b6/0x1410 [ 63.001297] __iomap_dio_rw+0xab4/0x1810 [ 63.001316] iomap_dio_rw+0x45/0xa0 [ 63.001328] ext4_file_write_iter+0xdde/0x1390 [ 63.001372] vfs_write+0x599/0xbd0 [ 63.001394] ksys_write+0xc8/0x190 [ 63.001403] do_syscall_64+0xd4/0x1b0 [ 63.001421] ? arch_exit_to_user_mode_prepare+0x3a/0x60 [ 63.001479] entry_SYSCALL_64_after_hwframe+0x6f/0x77 [ 63.001535] RIP: 0033:0x7f7fd3ebf539 [ 63.001551] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 [ 63.001562] RSP: 002b:00007f7fd32570c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 63.001584] RAX: ffffffffffffffda RBX: 00007f7fd3ff3f80 RCX: 00007f7fd3ebf539 [ 63.001590] RDX: 4db6d1e4f7e43360 RSI: 0000000020000000 RDI: 0000000000000004 [ 63.001595] RBP: 00007f7fd3f1e496 R08: 0000000000000000 R09: 0000000000000000 [ 63.001599] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 63.001604] R13: 0000000000000006 R14: 00007f7fd3ff3f80 R15: 00007ffd415ad2b8 ... [ 63.018142] ---[ end trace ]--- Historically, the signed integer overflow sanitizer did not work in the kernel due to its interaction with `-fwrapv` but this has since been changed [1] in the newest version of Clang; It was re-enabled in the kernel with Commit 557f8c582a9ba8ab ("ubsan: Reintroduce signed overflow sanitizer"). Let's rework this overflow checking logic to not actually perform an overflow during the check itself, thus avoiding the UBSAN splat. [1]: https://github.com/llvm/llvm-project/pull/82432 |
| CVE-2024-40999 | In the Linux kernel, the following vulnerability has been resolved: net: ena: Add validation for completion descriptors consistency Validate that `first` flag is set only for the first descriptor in multi-buffer packets. In case of an invalid descriptor, a reset will occur. A new reset reason for RX data corruption has been added. |
| CVE-2024-40998 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix uninitialized ratelimit_state->lock access in __ext4_fill_super() In the following concurrency we will access the uninitialized rs->lock: ext4_fill_super ext4_register_sysfs // sysfs registered msg_ratelimit_interval_ms // Other processes modify rs->interval to // non-zero via msg_ratelimit_interval_ms ext4_orphan_cleanup ext4_msg(sb, KERN_INFO, "Errors on filesystem, " __ext4_msg ___ratelimit(&(EXT4_SB(sb)->s_msg_ratelimit_state) if (!rs->interval) // do nothing if interval is 0 return 1; raw_spin_trylock_irqsave(&rs->lock, flags) raw_spin_trylock(lock) _raw_spin_trylock __raw_spin_trylock spin_acquire(&lock->dep_map, 0, 1, _RET_IP_) lock_acquire __lock_acquire register_lock_class assign_lock_key dump_stack(); ratelimit_state_init(&sbi->s_msg_ratelimit_state, 5 * HZ, 10); raw_spin_lock_init(&rs->lock); // init rs->lock here and get the following dump_stack: ========================================================= INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 12 PID: 753 Comm: mount Tainted: G E 6.7.0-rc6-next-20231222 #504 [...] Call Trace: dump_stack_lvl+0xc5/0x170 dump_stack+0x18/0x30 register_lock_class+0x740/0x7c0 __lock_acquire+0x69/0x13a0 lock_acquire+0x120/0x450 _raw_spin_trylock+0x98/0xd0 ___ratelimit+0xf6/0x220 __ext4_msg+0x7f/0x160 [ext4] ext4_orphan_cleanup+0x665/0x740 [ext4] __ext4_fill_super+0x21ea/0x2b10 [ext4] ext4_fill_super+0x14d/0x360 [ext4] [...] ========================================================= Normally interval is 0 until s_msg_ratelimit_state is initialized, so ___ratelimit() does nothing. But registering sysfs precedes initializing rs->lock, so it is possible to change rs->interval to a non-zero value via the msg_ratelimit_interval_ms interface of sysfs while rs->lock is uninitialized, and then a call to ext4_msg triggers the problem by accessing an uninitialized rs->lock. Therefore register sysfs after all initializations are complete to avoid such problems. |
| CVE-2024-40997 | In the Linux kernel, the following vulnerability has been resolved: cpufreq: amd-pstate: fix memory leak on CPU EPP exit The cpudata memory from kzalloc() in amd_pstate_epp_cpu_init() is not freed in the analogous exit function, so fix that. [ rjw: Subject and changelog edits ] |
| CVE-2024-40996 | In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid splat in pskb_pull_reason syzkaller builds (CONFIG_DEBUG_NET=y) frequently trigger a debug hint in pskb_may_pull. We'd like to retain this debug check because it might hint at integer overflows and other issues (kernel code should pull headers, not huge value). In bpf case, this splat isn't interesting at all: such (nonsensical) bpf programs are typically generated by a fuzzer anyway. Do what Eric suggested and suppress such warning. For CONFIG_DEBUG_NET=n we don't need the extra check because pskb_may_pull will do the right thing: return an error without the WARN() backtrace. |
| CVE-2024-40995 | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: fix possible infinite loop in tcf_idr_check_alloc() syzbot found hanging tasks waiting on rtnl_lock [1] A reproducer is available in the syzbot bug. When a request to add multiple actions with the same index is sent, the second request will block forever on the first request. This holds rtnl_lock, and causes tasks to hang. Return -EAGAIN to prevent infinite looping, while keeping documented behavior. [1] INFO: task kworker/1:0:5088 blocked for more than 143 seconds. Not tainted 6.9.0-rc4-syzkaller-00173-g3cdb45594619 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/1:0 state:D stack:23744 pid:5088 tgid:5088 ppid:2 flags:0x00004000 Workqueue: events_power_efficient reg_check_chans_work Call Trace: <TASK> context_switch kernel/sched/core.c:5409 [inline] __schedule+0xf15/0x5d00 kernel/sched/core.c:6746 __schedule_loop kernel/sched/core.c:6823 [inline] schedule+0xe7/0x350 kernel/sched/core.c:6838 schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:6895 __mutex_lock_common kernel/locking/mutex.c:684 [inline] __mutex_lock+0x5b8/0x9c0 kernel/locking/mutex.c:752 wiphy_lock include/net/cfg80211.h:5953 [inline] reg_leave_invalid_chans net/wireless/reg.c:2466 [inline] reg_check_chans_work+0x10a/0x10e0 net/wireless/reg.c:2481 |
| CVE-2024-40994 | In the Linux kernel, the following vulnerability has been resolved: ptp: fix integer overflow in max_vclocks_store On 32bit systems, the "4 * max" multiply can overflow. Use kcalloc() to do the allocation to prevent this. |
| CVE-2024-40993 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Fix suspicious rcu_dereference_protected() When destroying all sets, we are either in pernet exit phase or are executing a "destroy all sets command" from userspace. The latter was taken into account in ip_set_dereference() (nfnetlink mutex is held), but the former was not. The patch adds the required check to rcu_dereference_protected() in ip_set_dereference(). |
| CVE-2024-40992 | In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix responder length checking for UD request packets According to the IBA specification: If a UD request packet is detected with an invalid length, the request shall be an invalid request and it shall be silently dropped by the responder. The responder then waits for a new request packet. commit 689c5421bfe0 ("RDMA/rxe: Fix incorrect responder length checking") defers responder length check for UD QPs in function `copy_data`. But it introduces a regression issue for UD QPs. When the packet size is too large to fit in the receive buffer. `copy_data` will return error code -EINVAL. Then `send_data_in` will return RESPST_ERR_MALFORMED_WQE. UD QP will transfer into ERROR state. |
| CVE-2024-40991 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-glue: Fix of_k3_udma_glue_parse_chn_by_id() The of_k3_udma_glue_parse_chn_by_id() helper function erroneously invokes "of_node_put()" on the "udmax_np" device-node passed to it, without having incremented its reference count at any point. Fix it. |
| CVE-2024-40990 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Add check for srq max_sge attribute max_sge attribute is passed by the user, and is inserted and used unchecked, so verify that the value doesn't exceed maximum allowed value before using it. |
| CVE-2024-40989 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Disassociate vcpus from redistributor region on teardown When tearing down a redistributor region, make sure we don't have any dangling pointer to that region stored in a vcpu. |
| CVE-2024-40988 | In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix UBSAN warning in kv_dpm.c Adds bounds check for sumo_vid_mapping_entry. |
| CVE-2024-40987 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix UBSAN warning in kv_dpm.c Adds bounds check for sumo_vid_mapping_entry. |
| CVE-2024-40986 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx: xdma: Fix data synchronisation in xdma_channel_isr() Requests the vchan lock before using xdma->stop_request. |
| CVE-2024-40985 | In the Linux kernel, the following vulnerability has been resolved: net/tcp_ao: Don't leak ao_info on error-path It seems I introduced it together with TCP_AO_CMDF_AO_REQUIRED, on version 5 [1] of TCP-AO patches. Quite frustrative that having all these selftests that I've written, running kmemtest & kcov was always in todo. [1]: https://lore.kernel.org/netdev/[email protected]/ |
| CVE-2024-40984 | In the Linux kernel, the following vulnerability has been resolved: ACPICA: Revert "ACPICA: avoid Info: mapping multiple BARs. Your kernel is fine." Undo the modifications made in commit d410ee5109a1 ("ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine.""). The initial purpose of this commit was to stop memory mappings for operation regions from overlapping page boundaries, as it can trigger warnings if different page attributes are present. However, it was found that when this situation arises, mapping continues until the boundary's end, but there is still an attempt to read/write the entire length of the map, leading to a NULL pointer deference. For example, if a four-byte mapping request is made but only one byte is mapped because it hits the current page boundary's end, a four-byte read/write attempt is still made, resulting in a NULL pointer deference. Instead, map the entire length, as the ACPI specification does not mandate that it must be within the same page boundary. It is permissible for it to be mapped across different regions. |
| CVE-2024-40983 | In the Linux kernel, the following vulnerability has been resolved: tipc: force a dst refcount before doing decryption As it says in commit 3bc07321ccc2 ("xfrm: Force a dst refcount before entering the xfrm type handlers"): "Crypto requests might return asynchronous. In this case we leave the rcu protected region, so force a refcount on the skb's destination entry before we enter the xfrm type input/output handlers." On TIPC decryption path it has the same problem, and skb_dst_force() should be called before doing decryption to avoid a possible crash. Shuang reported this issue when this warning is triggered: [] WARNING: include/net/dst.h:337 tipc_sk_rcv+0x1055/0x1ea0 [tipc] [] Kdump: loaded Tainted: G W --------- - - 4.18.0-496.el8.x86_64+debug [] Workqueue: crypto cryptd_queue_worker [] RIP: 0010:tipc_sk_rcv+0x1055/0x1ea0 [tipc] [] Call Trace: [] tipc_sk_mcast_rcv+0x548/0xea0 [tipc] [] tipc_rcv+0xcf5/0x1060 [tipc] [] tipc_aead_decrypt_done+0x215/0x2e0 [tipc] [] cryptd_aead_crypt+0xdb/0x190 [] cryptd_queue_worker+0xed/0x190 [] process_one_work+0x93d/0x17e0 |
| CVE-2024-40982 | In the Linux kernel, the following vulnerability has been resolved: ssb: Fix potential NULL pointer dereference in ssb_device_uevent() The ssb_device_uevent() function first attempts to convert the 'dev' pointer to 'struct ssb_device *'. However, it mistakenly dereferences 'dev' before performing the NULL check, potentially leading to a NULL pointer dereference if 'dev' is NULL. To fix this issue, move the NULL check before dereferencing the 'dev' pointer, ensuring that the pointer is valid before attempting to use it. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-40981 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: bypass empty buckets in batadv_purge_orig_ref() Many syzbot reports are pointing to soft lockups in batadv_purge_orig_ref() [1] Root cause is unknown, but we can avoid spending too much time there and perhaps get more interesting reports. [1] watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:6:621] Modules linked in: irq event stamp: 6182794 hardirqs last enabled at (6182793): [<ffff8000801dae10>] __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386 hardirqs last disabled at (6182794): [<ffff80008ad66a78>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (6182794): [<ffff80008ad66a78>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (6182792): [<ffff80008aab71c4>] spin_unlock_bh include/linux/spinlock.h:396 [inline] softirqs last enabled at (6182792): [<ffff80008aab71c4>] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287 softirqs last disabled at (6182790): [<ffff80008aab61dc>] spin_lock_bh include/linux/spinlock.h:356 [inline] softirqs last disabled at (6182790): [<ffff80008aab61dc>] batadv_purge_orig_ref+0x164/0x1228 net/batman-adv/originator.c:1271 CPU: 0 PID: 621 Comm: kworker/u4:6 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Workqueue: bat_events batadv_purge_orig pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : should_resched arch/arm64/include/asm/preempt.h:79 [inline] pc : __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:388 lr : __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386 sp : ffff800099007970 x29: ffff800099007980 x28: 1fffe00018fce1bd x27: dfff800000000000 x26: ffff0000d2620008 x25: ffff0000c7e70de8 x24: 0000000000000001 x23: 1fffe00018e57781 x22: dfff800000000000 x21: ffff80008aab71c4 x20: ffff0001b40136c0 x19: ffff0000c72bbc08 x18: 1fffe0001a817bb0 x17: ffff800125414000 x16: ffff80008032116c x15: 0000000000000001 x14: 1fffe0001ee9d610 x13: 0000000000000000 x12: 0000000000000003 x11: 0000000000000000 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 00000000005e5789 x7 : ffff80008aab61dc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000006 x1 : 0000000000000080 x0 : ffff800125414000 Call trace: __daif_local_irq_enable arch/arm64/include/asm/irqflags.h:27 [inline] arch_local_irq_enable arch/arm64/include/asm/irqflags.h:49 [inline] __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:386 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x3c/0x4c kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287 batadv_purge_orig+0x20/0x70 net/batman-adv/originator.c:1300 process_one_work+0x694/0x1204 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:2787 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:51 lr : default_idle_call+0xf8/0x128 kernel/sched/idle.c:103 sp : ffff800093a17d30 x29: ffff800093a17d30 x28: dfff800000000000 x27: 1ffff00012742fb4 x26: ffff80008ec9d000 x25: 0000000000000000 x24: 0000000000000002 x23: 1ffff00011d93a74 x22: ffff80008ec9d3a0 x21: 0000000000000000 x20: ffff0000c19dbc00 x19: ffff8000802d0fd8 x18: 1fffe00036804396 x17: ffff80008ec9d000 x16: ffff8000802d089c x15: 0000000000000001 ---truncated--- |
| CVE-2024-40980 | In the Linux kernel, the following vulnerability has been resolved: drop_monitor: replace spin_lock by raw_spin_lock trace_drop_common() is called with preemption disabled, and it acquires a spin_lock. This is problematic for RT kernels because spin_locks are sleeping locks in this configuration, which causes the following splat: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47 preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 5 locks held by rcuc/47/449: #0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210 #1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130 #2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210 #3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70 #4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290 irq event stamp: 139909 hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80 hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290 softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170 softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0 Preemption disabled at: [<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0 CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7 Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022 Call Trace: <TASK> dump_stack_lvl+0x8c/0xd0 dump_stack+0x14/0x20 __might_resched+0x21e/0x2f0 rt_spin_lock+0x5e/0x130 ? trace_drop_common.constprop.0+0xb5/0x290 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_drop_common.constprop.0+0xb5/0x290 ? preempt_count_sub+0x1c/0xd0 ? _raw_spin_unlock_irqrestore+0x4a/0x80 ? __pfx_trace_drop_common.constprop.0+0x10/0x10 ? rt_mutex_slowunlock+0x26a/0x2e0 ? skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_rt_mutex_slowunlock+0x10/0x10 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_kfree_skb_hit+0x15/0x20 trace_kfree_skb+0xe9/0x150 kfree_skb_reason+0x7b/0x110 skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_skb_queue_purge_reason.part.0+0x10/0x10 ? mark_lock.part.0+0x8a/0x520 ... trace_drop_common() also disables interrupts, but this is a minor issue because we could easily replace it with a local_lock. Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic context. |
| CVE-2024-40979 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix kernel crash during resume Currently during resume, QMI target memory is not properly handled, resulting in kernel crash in case DMA remap is not supported: BUG: Bad page state in process kworker/u16:54 pfn:36e80 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80 page dumped because: nonzero _refcount Call Trace: bad_page free_page_is_bad_report __free_pages_ok __free_pages dma_direct_free dma_free_attrs ath12k_qmi_free_target_mem_chunk ath12k_qmi_msg_mem_request_cb The reason is: Once ath12k module is loaded, firmware sends memory request to host. In case DMA remap not supported, ath12k refuses the first request due to failure in allocating with large segment size: ath12k_pci 0000:04:00.0: qmi firmware request memory request ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144 ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size ath12k_pci 0000:04:00.0: qmi delays mem_request 2 ath12k_pci 0000:04:00.0: qmi firmware request memory request Later firmware comes back with more but small segments and allocation succeeds: ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 Now ath12k is working. If suspend is triggered, firmware will be reloaded during resume. As same as before, firmware requests two large segments at first. In ath12k_qmi_msg_mem_request_cb() segment count and size are assigned: ab->qmi.mem_seg_count == 2 ab->qmi.target_mem[0].size == 7077888 ab->qmi.target_mem[1].size == 8454144 Then allocation failed like before and ath12k_qmi_free_target_mem_chunk() is called to free all allocated segments. Note the first segment is skipped because its v.addr is cleared due to allocation failure: chunk->v.addr = dma_alloc_coherent() Also note that this leaks that segment because it has not been freed. While freeing the second segment, a size of 8454144 is passed to dma_free_coherent(). However remember that this segment is allocated at the first time firmware is loaded, before suspend. So its real size is 524288, much smaller than 8454144. As a result kernel found we are freeing some memory which is in use and thus cras ---truncated--- |
| CVE-2024-40978 | In the Linux kernel, the following vulnerability has been resolved: scsi: qedi: Fix crash while reading debugfs attribute The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly on a __user pointer, which results into the crash. To fix this issue, use a small local stack buffer for sprintf() and then call simple_read_from_buffer(), which in turns make the copy_to_user() call. BUG: unable to handle page fault for address: 00007f4801111000 PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0 Oops: 0002 [#1] PREEMPT SMP PTI Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023 RIP: 0010:memcpy_orig+0xcd/0x130 RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202 RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000 RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572 R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x183/0x510 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x22/0x30 ? memcpy_orig+0xcd/0x130 vsnprintf+0x102/0x4c0 sprintf+0x51/0x80 qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324] full_proxy_read+0x50/0x80 vfs_read+0xa5/0x2e0 ? folio_add_new_anon_rmap+0x44/0xa0 ? set_pte_at+0x15/0x30 ? do_pte_missing+0x426/0x7f0 ksys_read+0xa5/0xe0 do_syscall_64+0x58/0x80 ? __count_memcg_events+0x46/0x90 ? count_memcg_event_mm+0x3d/0x60 ? handle_mm_fault+0x196/0x2f0 ? do_user_addr_fault+0x267/0x890 ? exc_page_fault+0x69/0x150 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4800f20b4d |
| CVE-2024-40977 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921s: fix potential hung tasks during chip recovery During chip recovery (e.g. chip reset), there is a possible situation that kernel worker reset_work is holding the lock and waiting for kernel thread stat_worker to be parked, while stat_worker is waiting for the release of the same lock. It causes a deadlock resulting in the dumping of hung tasks messages and possible rebooting of the device. This patch prevents the execution of stat_worker during the chip recovery. |
| CVE-2024-40976 | In the Linux kernel, the following vulnerability has been resolved: drm/lima: mask irqs in timeout path before hard reset There is a race condition in which a rendering job might take just long enough to trigger the drm sched job timeout handler but also still complete before the hard reset is done by the timeout handler. This runs into race conditions not expected by the timeout handler. In some very specific cases it currently may result in a refcount imbalance on lima_pm_idle, with a stack dump such as: [10136.669170] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/lima/lima_devfreq.c:205 lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669459] pc : lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669628] Call trace: [10136.669634] lima_devfreq_record_idle+0xa0/0xb0 [10136.669646] lima_sched_pipe_task_done+0x5c/0xb0 [10136.669656] lima_gp_irq_handler+0xa8/0x120 [10136.669666] __handle_irq_event_percpu+0x48/0x160 [10136.669679] handle_irq_event+0x4c/0xc0 We can prevent that race condition entirely by masking the irqs at the beginning of the timeout handler, at which point we give up on waiting for that job entirely. The irqs will be enabled again at the next hard reset which is already done as a recovery by the timeout handler. |
| CVE-2024-40975 | In the Linux kernel, the following vulnerability has been resolved: platform/x86: x86-android-tablets: Unregister devices in reverse order Not all subsystems support a device getting removed while there are still consumers of the device with a reference to the device. One example of this is the regulator subsystem. If a regulator gets unregistered while there are still drivers holding a reference a WARN() at drivers/regulator/core.c:5829 triggers, e.g.: WARNING: CPU: 1 PID: 1587 at drivers/regulator/core.c:5829 regulator_unregister Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLADE_21.X64.0005.R00.1504101516 FFD8_X64_R_2015_04_10_1516 04/10/2015 RIP: 0010:regulator_unregister Call Trace: <TASK> regulator_unregister devres_release_group i2c_device_remove device_release_driver_internal bus_remove_device device_del device_unregister x86_android_tablet_remove On the Lenovo Yoga Tablet 2 series the bq24190 charger chip also provides a 5V boost converter output for powering USB devices connected to the micro USB port, the bq24190-charger driver exports this as a Vbus regulator. On the 830 (8") and 1050 ("10") models this regulator is controlled by a platform_device and x86_android_tablet_remove() removes platform_device-s before i2c_clients so the consumer gets removed first. But on the 1380 (13") model there is a lc824206xa micro-USB switch connected over I2C and the extcon driver for that controls the regulator. The bq24190 i2c-client *must* be registered first, because that creates the regulator with the lc824206xa listed as its consumer. If the regulator has not been registered yet the lc824206xa driver will end up getting a dummy regulator. Since in this case both the regulator provider and consumer are I2C devices, the only way to ensure that the consumer is unregistered first is to unregister the I2C devices in reverse order of in which they were created. For consistency and to avoid similar problems in the future change x86_android_tablet_remove() to unregister all device types in reverse order. |
| CVE-2024-40974 | In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Enforce hcall result buffer validity and size plpar_hcall(), plpar_hcall9(), and related functions expect callers to provide valid result buffers of certain minimum size. Currently this is communicated only through comments in the code and the compiler has no idea. For example, if I write a bug like this: long retbuf[PLPAR_HCALL_BUFSIZE]; // should be PLPAR_HCALL9_BUFSIZE plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, ...); This compiles with no diagnostics emitted, but likely results in stack corruption at runtime when plpar_hcall9() stores results past the end of the array. (To be clear this is a contrived example and I have not found a real instance yet.) To make this class of error less likely, we can use explicitly-sized array parameters instead of pointers in the declarations for the hcall APIs. When compiled with -Warray-bounds[1], the code above now provokes a diagnostic like this: error: array argument is too small; is of size 32, callee requires at least 72 [-Werror,-Warray-bounds] 60 | plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, | ^ ~~~~~~ [1] Enabled for LLVM builds but not GCC for now. See commit 0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") and related changes. |
| CVE-2024-40973 | In the Linux kernel, the following vulnerability has been resolved: media: mtk-vcodec: potential null pointer deference in SCP The return value of devm_kzalloc() needs to be checked to avoid NULL pointer deference. This is similar to CVE-2022-3113. |
| CVE-2024-40972 | In the Linux kernel, the following vulnerability has been resolved: ext4: do not create EA inode under buffer lock ext4_xattr_set_entry() creates new EA inodes while holding buffer lock on the external xattr block. This is problematic as it nests all the allocation locking (which acquires locks on other buffers) under the buffer lock. This can even deadlock when the filesystem is corrupted and e.g. quota file is setup to contain xattr block as data block. Move the allocation of EA inode out of ext4_xattr_set_entry() into the callers. |
| CVE-2024-40971 | In the Linux kernel, the following vulnerability has been resolved: f2fs: remove clear SB_INLINECRYPT flag in default_options In f2fs_remount, SB_INLINECRYPT flag will be clear and re-set. If create new file or open file during this gap, these files will not use inlinecrypt. Worse case, it may lead to data corruption if wrappedkey_v0 is enable. Thread A: Thread B: -f2fs_remount -f2fs_file_open or f2fs_new_inode -default_options <- clear SB_INLINECRYPT flag -fscrypt_select_encryption_impl -parse_options <- set SB_INLINECRYPT again |
| CVE-2024-40970 | In the Linux kernel, the following vulnerability has been resolved: Avoid hw_desc array overrun in dw-axi-dmac I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3 segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put() handles the hw_desc considering the descs_allocated, this scenario would result in a kernel panic (hw_desc array will be overrun). To fix this, the proposal is to add a new member to the axi_dma_desc structure, where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in axi_desc_put() to handle the hw_desc array correctly. Additionally I propose to remove the axi_chan_start_first_queued() call after completing the transfer, since it was identified that unbalance can occur (started descriptors can be interrupted and transfer ignored due to DMA channel not being enabled). |
| CVE-2024-40969 | In the Linux kernel, the following vulnerability has been resolved: f2fs: don't set RO when shutting down f2fs Shutdown does not check the error of thaw_super due to readonly, which causes a deadlock like below. f2fs_ioc_shutdown(F2FS_GOING_DOWN_FULLSYNC) issue_discard_thread - bdev_freeze - freeze_super - f2fs_stop_checkpoint() - f2fs_handle_critical_error - sb_start_write - set RO - waiting - bdev_thaw - thaw_super_locked - return -EINVAL, if sb_rdonly() - f2fs_stop_discard_thread -> wait for kthread_stop(discard_thread); |
| CVE-2024-40968 | In the Linux kernel, the following vulnerability has been resolved: MIPS: Octeon: Add PCIe link status check The standard PCIe configuration read-write interface is used to access the configuration space of the peripheral PCIe devices of the mips processor after the PCIe link surprise down, it can generate kernel panic caused by "Data bus error". So it is necessary to add PCIe link status check for system protection. When the PCIe link is down or in training, assigning a value of 0 to the configuration address can prevent read-write behavior to the configuration space of peripheral PCIe devices, thereby preventing kernel panic. |
| CVE-2024-40967 | In the Linux kernel, the following vulnerability has been resolved: serial: imx: Introduce timeout when waiting on transmitter empty By waiting at most 1 second for USR2_TXDC to be set, we avoid a potential deadlock. In case of the timeout, there is not much we can do, so we simply ignore the transmitter state and optimistically try to continue. |
| CVE-2024-40966 | In the Linux kernel, the following vulnerability has been resolved: tty: add the option to have a tty reject a new ldisc ... and use it to limit the virtual terminals to just N_TTY. They are kind of special, and in particular, the "con_write()" routine violates the "writes cannot sleep" rule that some ldiscs rely on. This avoids the BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659 when N_GSM has been attached to a virtual console, and gsmld_write() calls con_write() while holding a spinlock, and con_write() then tries to get the console lock. |
| CVE-2024-40965 | In the Linux kernel, the following vulnerability has been resolved: i2c: lpi2c: Avoid calling clk_get_rate during transfer Instead of repeatedly calling clk_get_rate for each transfer, lock the clock rate and cache the value. A deadlock has been observed while adding tlv320aic32x4 audio codec to the system. When this clock provider adds its clock, the clk mutex is locked already, it needs to access i2c, which in return needs the mutex for clk_get_rate as well. |
| CVE-2024-40964 | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind() The cs35l41_hda_unbind() function clears the hda_component entry matching it's index and then dereferences the codec pointer held in the first element of the hda_component array, this is an issue when the device index was 0. Instead use the codec pointer stashed in the cs35l41_hda structure as it will still be valid. |
| CVE-2024-40963 | In the Linux kernel, the following vulnerability has been resolved: mips: bmips: BCM6358: make sure CBR is correctly set It was discovered that some device have CBR address set to 0 causing kernel panic when arch_sync_dma_for_cpu_all is called. This was notice in situation where the system is booted from TP1 and BMIPS_GET_CBR() returns 0 instead of a valid address and !!(read_c0_brcm_cmt_local() & (1 << 31)); not failing. The current check whether RAC flush should be disabled or not are not enough hence lets check if CBR is a valid address or not. |
| CVE-2024-40962 | In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: allocate dummy checksums for zoned NODATASUM writes Shin'ichiro reported that when he's running fstests' test-case btrfs/167 on emulated zoned devices, he's seeing the following NULL pointer dereference in 'btrfs_zone_finish_endio()': Oops: general protection fault, probably for non-canonical address 0xdffffc0000000011: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] CPU: 4 PID: 2332440 Comm: kworker/u80:15 Tainted: G W 6.10.0-rc2-kts+ #4 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] RSP: 0018:ffff88867f107a90 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff893e5534 RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088 RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed1081696028 R10: ffff88840b4b0143 R11: ffff88834dfff600 R12: ffff88840b4b0000 R13: 0000000000020000 R14: 0000000000000000 R15: ffff888530ad5210 FS: 0000000000000000(0000) GS:ffff888e3f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f87223fff38 CR3: 00000007a7c6a002 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die_addr+0x46/0x70 ? exc_general_protection+0x14f/0x250 ? asm_exc_general_protection+0x26/0x30 ? do_raw_read_unlock+0x44/0x70 ? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] btrfs_finish_one_ordered+0x5d9/0x19a0 [btrfs] ? __pfx_lock_release+0x10/0x10 ? do_raw_write_lock+0x90/0x260 ? __pfx_do_raw_write_lock+0x10/0x10 ? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs] ? _raw_write_unlock+0x23/0x40 ? btrfs_finish_ordered_zoned+0x5a9/0x850 [btrfs] ? lock_acquire+0x435/0x500 btrfs_work_helper+0x1b1/0xa70 [btrfs] ? __schedule+0x10a8/0x60b0 ? __pfx___might_resched+0x10/0x10 process_one_work+0x862/0x1410 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5e6/0x1010 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c3/0x3a0 ? trace_irq_enable.constprop.0+0xce/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Enabling CONFIG_BTRFS_ASSERT revealed the following assertion to trigger: assertion failed: !list_empty(&ordered->list), in fs/btrfs/zoned.c:1815 This indicates, that we're missing the checksums list on the ordered_extent. As btrfs/167 is doing a NOCOW write this is to be expected. Further analysis with drgn confirmed the assumption: >>> inode = prog.crashed_thread().stack_trace()[11]['ordered'].inode >>> btrfs_inode = drgn.container_of(inode, "struct btrfs_inode", \ "vfs_inode") >>> print(btrfs_inode.flags) (u32)1 As zoned emulation mode simulates conventional zones on regular devices, we cannot use zone-append for writing. But we're only attaching dummy checksums if we're doing a zone-append write. So for NOCOW zoned data writes on conventional zones, also attach a dummy checksum. |
| CVE-2024-40961 | In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible NULL deref in fib6_nh_init() syzbot reminds us that in6_dev_get() can return NULL. fib6_nh_init() ip6_validate_gw( &idev ) ip6_route_check_nh( idev ) *idev = in6_dev_get(dev); // can be NULL Oops: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7] CPU: 0 PID: 11237 Comm: syz-executor.3 Not tainted 6.10.0-rc2-syzkaller-00249-gbe27b8965297 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 RIP: 0010:fib6_nh_init+0x640/0x2160 net/ipv6/route.c:3606 Code: 00 00 fc ff df 4c 8b 64 24 58 48 8b 44 24 28 4c 8b 74 24 30 48 89 c1 48 89 44 24 28 48 8d 98 e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 0f 85 b3 17 00 00 8b 1b 31 ff 89 de e8 b8 8b RSP: 0018:ffffc900032775a0 EFLAGS: 00010202 RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffffc90003277a54 RDI: ffff88802b3a08d8 RBP: ffffc900032778b0 R08: 00000000000002fc R09: 0000000000000000 R10: 00000000000002fc R11: 0000000000000000 R12: ffff88802b3a08b8 R13: 1ffff9200064eec8 R14: ffffc90003277a00 R15: dffffc0000000000 FS: 00007f940feb06c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000245e8000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip6_route_info_create+0x99e/0x12b0 net/ipv6/route.c:3809 ip6_route_add+0x28/0x160 net/ipv6/route.c:3853 ipv6_route_ioctl+0x588/0x870 net/ipv6/route.c:4483 inet6_ioctl+0x21a/0x280 net/ipv6/af_inet6.c:579 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f940f07cea9 |
| CVE-2024-40960 | In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible NULL dereference in rt6_probe() syzbot caught a NULL dereference in rt6_probe() [1] Bail out if __in6_dev_get() returns NULL. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cb: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000658-0x000000000000065f] CPU: 1 PID: 22444 Comm: syz-executor.0 Not tainted 6.10.0-rc2-syzkaller-00383-gb8481381d4e2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 RIP: 0010:rt6_probe net/ipv6/route.c:656 [inline] RIP: 0010:find_match+0x8c4/0xf50 net/ipv6/route.c:758 Code: 14 fd f7 48 8b 85 38 ff ff ff 48 c7 45 b0 00 00 00 00 48 8d b8 5c 06 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 19 RSP: 0018:ffffc900034af070 EFLAGS: 00010203 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004521000 RDX: 00000000000000cb RSI: ffffffff8990d0cd RDI: 000000000000065c RBP: ffffc900034af150 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000002 R12: 000000000000000a R13: 1ffff92000695e18 R14: ffff8880244a1d20 R15: 0000000000000000 FS: 00007f4844a5a6c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b31b27000 CR3: 000000002d42c000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rt6_nh_find_match+0xfa/0x1a0 net/ipv6/route.c:784 nexthop_for_each_fib6_nh+0x26d/0x4a0 net/ipv4/nexthop.c:1496 __find_rr_leaf+0x6e7/0xe00 net/ipv6/route.c:825 find_rr_leaf net/ipv6/route.c:853 [inline] rt6_select net/ipv6/route.c:897 [inline] fib6_table_lookup+0x57e/0xa30 net/ipv6/route.c:2195 ip6_pol_route+0x1cd/0x1150 net/ipv6/route.c:2231 pol_lookup_func include/net/ip6_fib.h:616 [inline] fib6_rule_lookup+0x386/0x720 net/ipv6/fib6_rules.c:121 ip6_route_output_flags_noref net/ipv6/route.c:2639 [inline] ip6_route_output_flags+0x1d0/0x640 net/ipv6/route.c:2651 ip6_dst_lookup_tail.constprop.0+0x961/0x1760 net/ipv6/ip6_output.c:1147 ip6_dst_lookup_flow+0x99/0x1d0 net/ipv6/ip6_output.c:1250 rawv6_sendmsg+0xdab/0x4340 net/ipv6/raw.c:898 inet_sendmsg+0x119/0x140 net/ipv4/af_inet.c:853 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_write_iter+0x4b8/0x5c0 net/socket.c:1160 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x6b6/0x1140 fs/read_write.c:590 ksys_write+0x1f8/0x260 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| CVE-2024-40959 | In the Linux kernel, the following vulnerability has been resolved: xfrm6: check ip6_dst_idev() return value in xfrm6_get_saddr() ip6_dst_idev() can return NULL, xfrm6_get_saddr() must act accordingly. syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 12 Comm: kworker/u8:1 Not tainted 6.10.0-rc2-syzkaller-00383-gb8481381d4e2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Workqueue: wg-kex-wg1 wg_packet_handshake_send_worker RIP: 0010:xfrm6_get_saddr+0x93/0x130 net/ipv6/xfrm6_policy.c:64 Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 97 00 00 00 4c 8b ab d8 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 86 00 00 00 4d 8b 6d 00 e8 ca 13 47 01 48 b8 00 RSP: 0018:ffffc90000117378 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88807b079dc0 RCX: ffffffff89a0d6d7 RDX: 0000000000000000 RSI: ffffffff89a0d6e9 RDI: ffff88807b079e98 RBP: ffff88807ad73248 R08: 0000000000000007 R09: fffffffffffff000 R10: ffff88807b079dc0 R11: 0000000000000007 R12: ffffc90000117480 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4586d00440 CR3: 0000000079042000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> xfrm_get_saddr net/xfrm/xfrm_policy.c:2452 [inline] xfrm_tmpl_resolve_one net/xfrm/xfrm_policy.c:2481 [inline] xfrm_tmpl_resolve+0xa26/0xf10 net/xfrm/xfrm_policy.c:2541 xfrm_resolve_and_create_bundle+0x140/0x2570 net/xfrm/xfrm_policy.c:2835 xfrm_bundle_lookup net/xfrm/xfrm_policy.c:3070 [inline] xfrm_lookup_with_ifid+0x4d1/0x1e60 net/xfrm/xfrm_policy.c:3201 xfrm_lookup net/xfrm/xfrm_policy.c:3298 [inline] xfrm_lookup_route+0x3b/0x200 net/xfrm/xfrm_policy.c:3309 ip6_dst_lookup_flow+0x15c/0x1d0 net/ipv6/ip6_output.c:1256 send6+0x611/0xd20 drivers/net/wireguard/socket.c:139 wg_socket_send_skb_to_peer+0xf9/0x220 drivers/net/wireguard/socket.c:178 wg_socket_send_buffer_to_peer+0x12b/0x190 drivers/net/wireguard/socket.c:200 wg_packet_send_handshake_initiation+0x227/0x360 drivers/net/wireguard/send.c:40 wg_packet_handshake_send_worker+0x1c/0x30 drivers/net/wireguard/send.c:51 process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 |
| CVE-2024-40958 | In the Linux kernel, the following vulnerability has been resolved: netns: Make get_net_ns() handle zero refcount net Syzkaller hit a warning: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 7890 at lib/refcount.c:25 refcount_warn_saturate+0xdf/0x1d0 Modules linked in: CPU: 3 PID: 7890 Comm: tun Not tainted 6.10.0-rc3-00100-gcaa4f9578aba-dirty #310 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:refcount_warn_saturate+0xdf/0x1d0 Code: 41 49 04 31 ff 89 de e8 9f 1e cd fe 84 db 75 9c e8 76 26 cd fe c6 05 b6 41 49 04 01 90 48 c7 c7 b8 8e 25 86 e8 d2 05 b5 fe 90 <0f> 0b 90 90 e9 79 ff ff ff e8 53 26 cd fe 0f b6 1 RSP: 0018:ffff8881067b7da0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff811c72ac RDX: ffff8881026a2140 RSI: ffffffff811c72b5 RDI: 0000000000000001 RBP: ffff8881067b7db0 R08: 0000000000000000 R09: 205b5d3730353139 R10: 0000000000000000 R11: 205d303938375420 R12: ffff8881086500c4 R13: ffff8881086500c4 R14: ffff8881086500b0 R15: ffff888108650040 FS: 00007f5b2961a4c0(0000) GS:ffff88823bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055d7ed36fd18 CR3: 00000001482f6000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0xa3/0xc0 ? __warn+0xa5/0x1c0 ? refcount_warn_saturate+0xdf/0x1d0 ? report_bug+0x1fc/0x2d0 ? refcount_warn_saturate+0xdf/0x1d0 ? handle_bug+0xa1/0x110 ? exc_invalid_op+0x3c/0xb0 ? asm_exc_invalid_op+0x1f/0x30 ? __warn_printk+0xcc/0x140 ? __warn_printk+0xd5/0x140 ? refcount_warn_saturate+0xdf/0x1d0 get_net_ns+0xa4/0xc0 ? __pfx_get_net_ns+0x10/0x10 open_related_ns+0x5a/0x130 __tun_chr_ioctl+0x1616/0x2370 ? __sanitizer_cov_trace_switch+0x58/0xa0 ? __sanitizer_cov_trace_const_cmp2+0x1c/0x30 ? __pfx_tun_chr_ioctl+0x10/0x10 tun_chr_ioctl+0x2f/0x40 __x64_sys_ioctl+0x11b/0x160 x64_sys_call+0x1211/0x20d0 do_syscall_64+0x9e/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5b28f165d7 Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 8 RSP: 002b:00007ffc2b59c5e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5b28f165d7 RDX: 0000000000000000 RSI: 00000000000054e3 RDI: 0000000000000003 RBP: 00007ffc2b59c650 R08: 00007f5b291ed8c0 R09: 00007f5b2961a4c0 R10: 0000000029690010 R11: 0000000000000246 R12: 0000000000400730 R13: 00007ffc2b59cf40 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: kernel: panic_on_warn set ... This is trigger as below: ns0 ns1 tun_set_iff() //dev is tun0 tun->dev = dev //ip link set tun0 netns ns1 put_net() //ref is 0 __tun_chr_ioctl() //TUNGETDEVNETNS net = dev_net(tun->dev); open_related_ns(&net->ns, get_net_ns); //ns1 get_net_ns() get_net() //addition on 0 Use maybe_get_net() in get_net_ns in case net's ref is zero to fix this |
| CVE-2024-40957 | In the Linux kernel, the following vulnerability has been resolved: seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors input_action_end_dx4() and input_action_end_dx6() are called NF_HOOK() for PREROUTING hook, in PREROUTING hook, we should passing a valid indev, and a NULL outdev to NF_HOOK(), otherwise may trigger a NULL pointer dereference, as below: [74830.647293] BUG: kernel NULL pointer dereference, address: 0000000000000090 [74830.655633] #PF: supervisor read access in kernel mode [74830.657888] #PF: error_code(0x0000) - not-present page [74830.659500] PGD 0 P4D 0 [74830.660450] Oops: 0000 [#1] PREEMPT SMP PTI ... [74830.664953] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [74830.666569] RIP: 0010:rpfilter_mt+0x44/0x15e [ipt_rpfilter] ... [74830.689725] Call Trace: [74830.690402] <IRQ> [74830.690953] ? show_trace_log_lvl+0x1c4/0x2df [74830.692020] ? show_trace_log_lvl+0x1c4/0x2df [74830.693095] ? ipt_do_table+0x286/0x710 [ip_tables] [74830.694275] ? __die_body.cold+0x8/0xd [74830.695205] ? page_fault_oops+0xac/0x140 [74830.696244] ? exc_page_fault+0x62/0x150 [74830.697225] ? asm_exc_page_fault+0x22/0x30 [74830.698344] ? rpfilter_mt+0x44/0x15e [ipt_rpfilter] [74830.699540] ipt_do_table+0x286/0x710 [ip_tables] [74830.700758] ? ip6_route_input+0x19d/0x240 [74830.701752] nf_hook_slow+0x3f/0xb0 [74830.702678] input_action_end_dx4+0x19b/0x1e0 [74830.703735] ? input_action_end_t+0xe0/0xe0 [74830.704734] seg6_local_input_core+0x2d/0x60 [74830.705782] lwtunnel_input+0x5b/0xb0 [74830.706690] __netif_receive_skb_one_core+0x63/0xa0 [74830.707825] process_backlog+0x99/0x140 [74830.709538] __napi_poll+0x2c/0x160 [74830.710673] net_rx_action+0x296/0x350 [74830.711860] __do_softirq+0xcb/0x2ac [74830.713049] do_softirq+0x63/0x90 input_action_end_dx4() passing a NULL indev to NF_HOOK(), and finally trigger a NULL dereference in rpfilter_mt()->rpfilter_is_loopback(): static bool rpfilter_is_loopback(const struct sk_buff *skb, const struct net_device *in) { // in is NULL return skb->pkt_type == PACKET_LOOPBACK || in->flags & IFF_LOOPBACK; } |
| CVE-2024-40956 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix possible Use-After-Free in irq_process_work_list Use list_for_each_entry_safe() to allow iterating through the list and deleting the entry in the iteration process. The descriptor is freed via idxd_desc_complete() and there's a slight chance may cause issue for the list iterator when the descriptor is reused by another thread without it being deleted from the list. |
| CVE-2024-40955 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists() We can trigger a slab-out-of-bounds with the following commands: mkfs.ext4 -F /dev/$disk 10G mount /dev/$disk /tmp/test echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc echo test > /tmp/test/file && sync ================================================================== BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11 CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521 Call Trace: dump_stack_lvl+0x2c/0x50 kasan_report+0xb6/0xf0 ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] ext4_mb_regular_allocator+0x19e9/0x2370 [ext4] ext4_mb_new_blocks+0x88a/0x1370 [ext4] ext4_ext_map_blocks+0x14f7/0x2390 [ext4] ext4_map_blocks+0x569/0xea0 [ext4] ext4_do_writepages+0x10f6/0x1bc0 [ext4] [...] ================================================================== The flow of issue triggering is as follows: // Set s_mb_group_prealloc to 2147483647 via sysfs ext4_mb_new_blocks ext4_mb_normalize_request ext4_mb_normalize_group_request ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc ext4_mb_regular_allocator ext4_mb_choose_next_group ext4_mb_choose_next_group_best_avail mb_avg_fragment_size_order order = fls(len) - 2 = 29 ext4_mb_find_good_group_avg_frag_lists frag_list = &sbi->s_mb_avg_fragment_size[order] if (list_empty(frag_list)) // Trigger SOOB! At 4k block size, the length of the s_mb_avg_fragment_size list is 14, but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds to be triggered by an attempt to access an element at index 29. Add a new attr_id attr_clusters_in_group with values in the range [0, sbi->s_clusters_per_group] and declare mb_group_prealloc as that type to fix the issue. In addition avoid returning an order from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb) and reduce some useless loops. |
| CVE-2024-40954 | In the Linux kernel, the following vulnerability has been resolved: net: do not leave a dangling sk pointer, when socket creation fails It is possible to trigger a use-after-free by: * attaching an fentry probe to __sock_release() and the probe calling the bpf_get_socket_cookie() helper * running traceroute -I 1.1.1.1 on a freshly booted VM A KASAN enabled kernel will log something like below (decoded and stripped): ================================================================== BUG: KASAN: slab-use-after-free in __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) Read of size 8 at addr ffff888007110dd8 by task traceroute/299 CPU: 2 PID: 299 Comm: traceroute Tainted: G E 6.10.0-rc2+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1)) print_report (mm/kasan/report.c:378 mm/kasan/report.c:488) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_report (mm/kasan/report.c:603) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_check_range (mm/kasan/generic.c:183 mm/kasan/generic.c:189) __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) bpf_get_socket_ptr_cookie (./arch/x86/include/asm/preempt.h:94 ./include/linux/sock_diag.h:42 net/core/filter.c:5094 net/core/filter.c:5092) bpf_prog_875642cf11f1d139___sock_release+0x6e/0x8e bpf_trampoline_6442506592+0x47/0xaf __sock_release (net/socket.c:652) __sock_create (net/socket.c:1601) ... Allocated by task 299 on cpu 2 at 78.328492s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) __kasan_slab_alloc (mm/kasan/common.c:312 mm/kasan/common.c:338) kmem_cache_alloc_noprof (mm/slub.c:3941 mm/slub.c:4000 mm/slub.c:4007) sk_prot_alloc (net/core/sock.c:2075) sk_alloc (net/core/sock.c:2134) inet_create (net/ipv4/af_inet.c:327 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 299 on cpu 2 at 78.328502s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) kasan_save_free_info (mm/kasan/generic.c:582) poison_slab_object (mm/kasan/common.c:242) __kasan_slab_free (mm/kasan/common.c:256) kmem_cache_free (mm/slub.c:4437 mm/slub.c:4511) __sk_destruct (net/core/sock.c:2117 net/core/sock.c:2208) inet_create (net/ipv4/af_inet.c:397 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fix this by clearing the struct socket reference in sk_common_release() to cover all protocol families create functions, which may already attached the reference to the sk object with sock_init_data(). |
| CVE-2024-40953 | In the Linux kernel, the following vulnerability has been resolved: KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin() Use {READ,WRITE}_ONCE() to access kvm->last_boosted_vcpu to ensure the loads and stores are atomic. In the extremely unlikely scenario the compiler tears the stores, it's theoretically possible for KVM to attempt to get a vCPU using an out-of-bounds index, e.g. if the write is split into multiple 8-bit stores, and is paired with a 32-bit load on a VM with 257 vCPUs: CPU0 CPU1 last_boosted_vcpu = 0xff; (last_boosted_vcpu = 0x100) last_boosted_vcpu[15:8] = 0x01; i = (last_boosted_vcpu = 0x1ff) last_boosted_vcpu[7:0] = 0x00; vcpu = kvm->vcpu_array[0x1ff]; As detected by KCSAN: BUG: KCSAN: data-race in kvm_vcpu_on_spin [kvm] / kvm_vcpu_on_spin [kvm] write to 0xffffc90025a92344 of 4 bytes by task 4340 on cpu 16: kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4112) kvm handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:? arch/x86/kvm/vmx/vmx.c:6606) kvm_intel vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm __se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890) __x64_sys_ioctl (fs/ioctl.c:890) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) read to 0xffffc90025a92344 of 4 bytes by task 4342 on cpu 4: kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4069) kvm handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:? arch/x86/kvm/vmx/vmx.c:6606) kvm_intel vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm __se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890) __x64_sys_ioctl (fs/ioctl.c:890) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) value changed: 0x00000012 -> 0x00000000 |
| CVE-2024-40952 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix NULL pointer dereference in ocfs2_journal_dirty() bdev->bd_super has been removed and commit 8887b94d9322 change the usage from bdev->bd_super to b_assoc_map->host->i_sb. This introduces the following NULL pointer dereference in ocfs2_journal_dirty() since b_assoc_map is still not initialized. This can be easily reproduced by running xfstests generic/186, which simulate no more credits. [ 134.351592] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 134.355341] RIP: 0010:ocfs2_journal_dirty+0x14f/0x160 [ocfs2] ... [ 134.365071] Call Trace: [ 134.365312] <TASK> [ 134.365524] ? __die_body+0x1e/0x60 [ 134.365868] ? page_fault_oops+0x13d/0x4f0 [ 134.366265] ? __pfx_bit_wait_io+0x10/0x10 [ 134.366659] ? schedule+0x27/0xb0 [ 134.366981] ? exc_page_fault+0x6a/0x140 [ 134.367356] ? asm_exc_page_fault+0x26/0x30 [ 134.367762] ? ocfs2_journal_dirty+0x14f/0x160 [ocfs2] [ 134.368305] ? ocfs2_journal_dirty+0x13d/0x160 [ocfs2] [ 134.368837] ocfs2_create_new_meta_bhs.isra.51+0x139/0x2e0 [ocfs2] [ 134.369454] ocfs2_grow_tree+0x688/0x8a0 [ocfs2] [ 134.369927] ocfs2_split_and_insert.isra.67+0x35c/0x4a0 [ocfs2] [ 134.370521] ocfs2_split_extent+0x314/0x4d0 [ocfs2] [ 134.371019] ocfs2_change_extent_flag+0x174/0x410 [ocfs2] [ 134.371566] ocfs2_add_refcount_flag+0x3fa/0x630 [ocfs2] [ 134.372117] ocfs2_reflink_remap_extent+0x21b/0x4c0 [ocfs2] [ 134.372994] ? inode_update_timestamps+0x4a/0x120 [ 134.373692] ? __pfx_ocfs2_journal_access_di+0x10/0x10 [ocfs2] [ 134.374545] ? __pfx_ocfs2_journal_access_di+0x10/0x10 [ocfs2] [ 134.375393] ocfs2_reflink_remap_blocks+0xe4/0x4e0 [ocfs2] [ 134.376197] ocfs2_remap_file_range+0x1de/0x390 [ocfs2] [ 134.376971] ? security_file_permission+0x29/0x50 [ 134.377644] vfs_clone_file_range+0xfe/0x320 [ 134.378268] ioctl_file_clone+0x45/0xa0 [ 134.378853] do_vfs_ioctl+0x457/0x990 [ 134.379422] __x64_sys_ioctl+0x6e/0xd0 [ 134.379987] do_syscall_64+0x5d/0x170 [ 134.380550] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 134.381231] RIP: 0033:0x7fa4926397cb [ 134.381786] Code: 73 01 c3 48 8b 0d bd 56 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8d 56 38 00 f7 d8 64 89 01 48 [ 134.383930] RSP: 002b:00007ffc2b39f7b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 134.384854] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fa4926397cb [ 134.385734] RDX: 00007ffc2b39f7f0 RSI: 000000004020940d RDI: 0000000000000003 [ 134.386606] RBP: 0000000000000000 R08: 00111a82a4f015bb R09: 00007fa494221000 [ 134.387476] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 134.388342] R13: 0000000000f10000 R14: 0000558e844e2ac8 R15: 0000000000f10000 [ 134.389207] </TASK> Fix it by only aborting transaction and journal in ocfs2_journal_dirty() now, and leave ocfs2_abort() later when detecting an aborted handle, e.g. start next transaction. Also log the handle details in this case. |
| CVE-2024-40951 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix NULL pointer dereference in ocfs2_abort_trigger() bdev->bd_super has been removed and commit 8887b94d9322 change the usage from bdev->bd_super to b_assoc_map->host->i_sb. Since ocfs2 hasn't set bh->b_assoc_map, it will trigger NULL pointer dereference when calling into ocfs2_abort_trigger(). Actually this was pointed out in history, see commit 74e364ad1b13. But I've made a mistake when reviewing commit 8887b94d9322 and then re-introduce this regression. Since we cannot revive bdev in buffer head, so fix this issue by initializing all types of ocfs2 triggers when fill super, and then get the specific ocfs2 trigger from ocfs2_caching_info when access journal. [[email protected]: v2] Link: https://lkml.kernel.org/r/[email protected] |
| CVE-2024-40950 | In the Linux kernel, the following vulnerability has been resolved: mm: huge_memory: fix misused mapping_large_folio_support() for anon folios When I did a large folios split test, a WARNING "[ 5059.122759][ T166] Cannot split file folio to non-0 order" was triggered. But the test cases are only for anonmous folios. while mapping_large_folio_support() is only reasonable for page cache folios. In split_huge_page_to_list_to_order(), the folio passed to mapping_large_folio_support() maybe anonmous folio. The folio_test_anon() check is missing. So the split of the anonmous THP is failed. This is also the same for shmem_mapping(). We'd better add a check for both. But the shmem_mapping() in __split_huge_page() is not involved, as for anonmous folios, the end parameter is set to -1, so (head[i].index >= end) is always false. shmem_mapping() is not called. Also add a VM_WARN_ON_ONCE() in mapping_large_folio_support() for anon mapping, So we can detect the wrong use more easily. THP folios maybe exist in the pagecache even the file system doesn't support large folio, it is because when CONFIG_TRANSPARENT_HUGEPAGE is enabled, khugepaged will try to collapse read-only file-backed pages to THP. But the mapping does not actually support multi order large folios properly. Using /sys/kernel/debug/split_huge_pages to verify this, with this patch, large anon THP is successfully split and the warning is ceased. |
| CVE-2024-40949 | In the Linux kernel, the following vulnerability has been resolved: mm: shmem: fix getting incorrect lruvec when replacing a shmem folio When testing shmem swapin, I encountered the warning below on my machine. The reason is that replacing an old shmem folio with a new one causes mem_cgroup_migrate() to clear the old folio's memcg data. As a result, the old folio cannot get the correct memcg's lruvec needed to remove itself from the LRU list when it is being freed. This could lead to possible serious problems, such as LRU list crashes due to holding the wrong LRU lock, and incorrect LRU statistics. To fix this issue, we can fallback to use the mem_cgroup_replace_folio() to replace the old shmem folio. [ 5241.100311] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5d9960 [ 5241.100317] head: order:4 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 5241.100319] flags: 0x17fffe0000040068(uptodate|lru|head|swapbacked|node=0|zone=2|lastcpupid=0x3ffff) [ 5241.100323] raw: 17fffe0000040068 fffffdffd6687948 fffffdffd69ae008 0000000000000000 [ 5241.100325] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 5241.100326] head: 17fffe0000040068 fffffdffd6687948 fffffdffd69ae008 0000000000000000 [ 5241.100327] head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 5241.100328] head: 17fffe0000000204 fffffdffd6665801 ffffffffffffffff 0000000000000000 [ 5241.100329] head: 0000000a00000010 0000000000000000 00000000ffffffff 0000000000000000 [ 5241.100330] page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled()) [ 5241.100338] ------------[ cut here ]------------ [ 5241.100339] WARNING: CPU: 19 PID: 78402 at include/linux/memcontrol.h:775 folio_lruvec_lock_irqsave+0x140/0x150 [...] [ 5241.100374] pc : folio_lruvec_lock_irqsave+0x140/0x150 [ 5241.100375] lr : folio_lruvec_lock_irqsave+0x138/0x150 [ 5241.100376] sp : ffff80008b38b930 [...] [ 5241.100398] Call trace: [ 5241.100399] folio_lruvec_lock_irqsave+0x140/0x150 [ 5241.100401] __page_cache_release+0x90/0x300 [ 5241.100404] __folio_put+0x50/0x108 [ 5241.100406] shmem_replace_folio+0x1b4/0x240 [ 5241.100409] shmem_swapin_folio+0x314/0x528 [ 5241.100411] shmem_get_folio_gfp+0x3b4/0x930 [ 5241.100412] shmem_fault+0x74/0x160 [ 5241.100414] __do_fault+0x40/0x218 [ 5241.100417] do_shared_fault+0x34/0x1b0 [ 5241.100419] do_fault+0x40/0x168 [ 5241.100420] handle_pte_fault+0x80/0x228 [ 5241.100422] __handle_mm_fault+0x1c4/0x440 [ 5241.100424] handle_mm_fault+0x60/0x1f0 [ 5241.100426] do_page_fault+0x120/0x488 [ 5241.100429] do_translation_fault+0x4c/0x68 [ 5241.100431] do_mem_abort+0x48/0xa0 [ 5241.100434] el0_da+0x38/0xc0 [ 5241.100436] el0t_64_sync_handler+0x68/0xc0 [ 5241.100437] el0t_64_sync+0x14c/0x150 [ 5241.100439] ---[ end trace 0000000000000000 ]--- [[email protected]: remove less helpful comments, per Matthew] Link: https://lkml.kernel.org/r/ccad3fe1375b468ebca3227b6b729f3eaf9d8046.1718423197.git.baolin.wang@linux.alibaba.com |
| CVE-2024-40948 | In the Linux kernel, the following vulnerability has been resolved: mm/page_table_check: fix crash on ZONE_DEVICE Not all pages may apply to pgtable check. One example is ZONE_DEVICE pages: they map PFNs directly, and they don't allocate page_ext at all even if there's struct page around. One may reference devm_memremap_pages(). When both ZONE_DEVICE and page-table-check enabled, then try to map some dax memories, one can trigger kernel bug constantly now when the kernel was trying to inject some pfn maps on the dax device: kernel BUG at mm/page_table_check.c:55! While it's pretty legal to use set_pxx_at() for ZONE_DEVICE pages for page fault resolutions, skip all the checks if page_ext doesn't even exist in pgtable checker, which applies to ZONE_DEVICE but maybe more. |
| CVE-2024-40947 | In the Linux kernel, the following vulnerability has been resolved: ima: Avoid blocking in RCU read-side critical section A panic happens in ima_match_policy: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 42f873067 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 5 PID: 1286325 Comm: kubeletmonit.sh Kdump: loaded Tainted: P Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ima_match_policy+0x84/0x450 Code: 49 89 fc 41 89 cf 31 ed 89 44 24 14 eb 1c 44 39 7b 18 74 26 41 83 ff 05 74 20 48 8b 1b 48 3b 1d f2 b9 f4 00 0f 84 9c 01 00 00 <44> 85 73 10 74 ea 44 8b 6b 14 41 f6 c5 01 75 d4 41 f6 c5 02 74 0f RSP: 0018:ff71570009e07a80 EFLAGS: 00010207 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000200 RDX: ffffffffad8dc7c0 RSI: 0000000024924925 RDI: ff3e27850dea2000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffabfce739 R10: ff3e27810cc42400 R11: 0000000000000000 R12: ff3e2781825ef970 R13: 00000000ff3e2785 R14: 000000000000000c R15: 0000000000000001 FS: 00007f5195b51740(0000) GS:ff3e278b12d40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000626d24002 CR4: 0000000000361ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ima_get_action+0x22/0x30 process_measurement+0xb0/0x830 ? page_add_file_rmap+0x15/0x170 ? alloc_set_pte+0x269/0x4c0 ? prep_new_page+0x81/0x140 ? simple_xattr_get+0x75/0xa0 ? selinux_file_open+0x9d/0xf0 ima_file_check+0x64/0x90 path_openat+0x571/0x1720 do_filp_open+0x9b/0x110 ? page_counter_try_charge+0x57/0xc0 ? files_cgroup_alloc_fd+0x38/0x60 ? __alloc_fd+0xd4/0x250 ? do_sys_open+0x1bd/0x250 do_sys_open+0x1bd/0x250 do_syscall_64+0x5d/0x1d0 entry_SYSCALL_64_after_hwframe+0x65/0xca Commit c7423dbdbc9e ("ima: Handle -ESTALE returned by ima_filter_rule_match()") introduced call to ima_lsm_copy_rule within a RCU read-side critical section which contains kmalloc with GFP_KERNEL. This implies a possible sleep and violates limitations of RCU read-side critical sections on non-PREEMPT systems. Sleeping within RCU read-side critical section might cause synchronize_rcu() returning early and break RCU protection, allowing a UAF to happen. The root cause of this issue could be described as follows: | Thread A | Thread B | | |ima_match_policy | | | rcu_read_lock | |ima_lsm_update_rule | | | synchronize_rcu | | | | kmalloc(GFP_KERNEL)| | | sleep | ==> synchronize_rcu returns early | kfree(entry) | | | | entry = entry->next| ==> UAF happens and entry now becomes NULL (or could be anything). | | entry->action | ==> Accessing entry might cause panic. To fix this issue, we are converting all kmalloc that is called within RCU read-side critical section to use GFP_ATOMIC. [PM: fixed missing comment, long lines, !CONFIG_IMA_LSM_RULES case] |
| CVE-2024-40945 | In the Linux kernel, the following vulnerability has been resolved: iommu: Return right value in iommu_sva_bind_device() iommu_sva_bind_device() should return either a sva bond handle or an ERR_PTR value in error cases. Existing drivers (idxd and uacce) only check the return value with IS_ERR(). This could potentially lead to a kernel NULL pointer dereference issue if the function returns NULL instead of an error pointer. In reality, this doesn't cause any problems because iommu_sva_bind_device() only returns NULL when the kernel is not configured with CONFIG_IOMMU_SVA. In this case, iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA) will return an error, and the device drivers won't call iommu_sva_bind_device() at all. |
| CVE-2024-40944 | In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Fix bug with call depth tracking The call to cc_platform_has() triggers a fault and system crash if call depth tracking is active because the GS segment has been reset by load_segments() and GS_BASE is now 0 but call depth tracking uses per-CPU variables to operate. Call cc_platform_has() earlier in the function when GS is still valid. [ bp: Massage. ] |
| CVE-2024-40943 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix races between hole punching and AIO+DIO After commit "ocfs2: return real error code in ocfs2_dio_wr_get_block", fstests/generic/300 become from always failed to sometimes failed: ======================================================================== [ 473.293420 ] run fstests generic/300 [ 475.296983 ] JBD2: Ignoring recovery information on journal [ 475.302473 ] ocfs2: Mounting device (253,1) on (node local, slot 0) with ordered data mode. [ 494.290998 ] OCFS2: ERROR (device dm-1): ocfs2_change_extent_flag: Owner 5668 has an extent at cpos 78723 which can no longer be found [ 494.291609 ] On-disk corruption discovered. Please run fsck.ocfs2 once the filesystem is unmounted. [ 494.292018 ] OCFS2: File system is now read-only. [ 494.292224 ] (kworker/19:11,2628,19):ocfs2_mark_extent_written:5272 ERROR: status = -30 [ 494.292602 ] (kworker/19:11,2628,19):ocfs2_dio_end_io_write:2374 ERROR: status = -3 fio: io_u error on file /mnt/scratch/racer: Read-only file system: write offset=460849152, buflen=131072 ========================================================================= In __blockdev_direct_IO, ocfs2_dio_wr_get_block is called to add unwritten extents to a list. extents are also inserted into extent tree in ocfs2_write_begin_nolock. Then another thread call fallocate to puch a hole at one of the unwritten extent. The extent at cpos was removed by ocfs2_remove_extent(). At end io worker thread, ocfs2_search_extent_list found there is no such extent at the cpos. T1 T2 T3 inode lock ... insert extents ... inode unlock ocfs2_fallocate __ocfs2_change_file_space inode lock lock ip_alloc_sem ocfs2_remove_inode_range inode ocfs2_remove_btree_range ocfs2_remove_extent ^---remove the extent at cpos 78723 ... unlock ip_alloc_sem inode unlock ocfs2_dio_end_io ocfs2_dio_end_io_write lock ip_alloc_sem ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_search_extent_list ^---failed to find extent ... unlock ip_alloc_sem In most filesystems, fallocate is not compatible with racing with AIO+DIO, so fix it by adding to wait for all dio before fallocate/punch_hole like ext4. |
| CVE-2024-40942 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: mesh: Fix leak of mesh_preq_queue objects The hwmp code use objects of type mesh_preq_queue, added to a list in ieee80211_if_mesh, to keep track of mpath we need to resolve. If the mpath gets deleted, ex mesh interface is removed, the entries in that list will never get cleaned. Fix this by flushing all corresponding items of the preq_queue in mesh_path_flush_pending(). This should take care of KASAN reports like this: unreferenced object 0xffff00000668d800 (size 128): comm "kworker/u8:4", pid 67, jiffies 4295419552 (age 1836.444s) hex dump (first 32 bytes): 00 1f 05 09 00 00 ff ff 00 d5 68 06 00 00 ff ff ..........h..... 8e 97 ea eb 3e b8 01 00 00 00 00 00 00 00 00 00 ....>........... backtrace: [<000000007302a0b6>] __kmem_cache_alloc_node+0x1e0/0x35c [<00000000049bd418>] kmalloc_trace+0x34/0x80 [<0000000000d792bb>] mesh_queue_preq+0x44/0x2a8 [<00000000c99c3696>] mesh_nexthop_resolve+0x198/0x19c [<00000000926bf598>] ieee80211_xmit+0x1d0/0x1f4 [<00000000fc8c2284>] __ieee80211_subif_start_xmit+0x30c/0x764 [<000000005926ee38>] ieee80211_subif_start_xmit+0x9c/0x7a4 [<000000004c86e916>] dev_hard_start_xmit+0x174/0x440 [<0000000023495647>] __dev_queue_xmit+0xe24/0x111c [<00000000cfe9ca78>] batadv_send_skb_packet+0x180/0x1e4 [<000000007bacc5d5>] batadv_v_elp_periodic_work+0x2f4/0x508 [<00000000adc3cd94>] process_one_work+0x4b8/0xa1c [<00000000b36425d1>] worker_thread+0x9c/0x634 [<0000000005852dd5>] kthread+0x1bc/0x1c4 [<000000005fccd770>] ret_from_fork+0x10/0x20 unreferenced object 0xffff000009051f00 (size 128): comm "kworker/u8:4", pid 67, jiffies 4295419553 (age 1836.440s) hex dump (first 32 bytes): 90 d6 92 0d 00 00 ff ff 00 d8 68 06 00 00 ff ff ..........h..... 36 27 92 e4 02 e0 01 00 00 58 79 06 00 00 ff ff 6'.......Xy..... backtrace: [<000000007302a0b6>] __kmem_cache_alloc_node+0x1e0/0x35c [<00000000049bd418>] kmalloc_trace+0x34/0x80 [<0000000000d792bb>] mesh_queue_preq+0x44/0x2a8 [<00000000c99c3696>] mesh_nexthop_resolve+0x198/0x19c [<00000000926bf598>] ieee80211_xmit+0x1d0/0x1f4 [<00000000fc8c2284>] __ieee80211_subif_start_xmit+0x30c/0x764 [<000000005926ee38>] ieee80211_subif_start_xmit+0x9c/0x7a4 [<000000004c86e916>] dev_hard_start_xmit+0x174/0x440 [<0000000023495647>] __dev_queue_xmit+0xe24/0x111c [<00000000cfe9ca78>] batadv_send_skb_packet+0x180/0x1e4 [<000000007bacc5d5>] batadv_v_elp_periodic_work+0x2f4/0x508 [<00000000adc3cd94>] process_one_work+0x4b8/0xa1c [<00000000b36425d1>] worker_thread+0x9c/0x634 [<0000000005852dd5>] kthread+0x1bc/0x1c4 [<000000005fccd770>] ret_from_fork+0x10/0x20 |
| CVE-2024-40941 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't read past the mfuart notifcation In case the firmware sends a notification that claims it has more data than it has, we will read past that was allocated for the notification. Remove the print of the buffer, we won't see it by default. If needed, we can see the content with tracing. This was reported by KFENCE. |
| CVE-2024-40940 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix tainted pointer delete is case of flow rules creation fail In case of flow rule creation fail in mlx5_lag_create_port_sel_table(), instead of previously created rules, the tainted pointer is deleted deveral times. Fix this bug by using correct flow rules pointers. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-40939 | In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: Fix tainted pointer delete is case of region creation fail In case of region creation fail in ipc_devlink_create_region(), previously created regions delete process starts from tainted pointer which actually holds error code value. Fix this bug by decreasing region index before delete. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-40938 | In the Linux kernel, the following vulnerability has been resolved: landlock: Fix d_parent walk The WARN_ON_ONCE() in collect_domain_accesses() can be triggered when trying to link a root mount point. This cannot work in practice because this directory is mounted, but the VFS check is done after the call to security_path_link(). Do not use source directory's d_parent when the source directory is the mount point. [mic: Fix commit message] |
| CVE-2024-40937 | In the Linux kernel, the following vulnerability has been resolved: gve: Clear napi->skb before dev_kfree_skb_any() gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it is freed with dev_kfree_skb_any(). This can result in a subsequent call to napi_get_frags returning a dangling pointer. Fix this by clearing napi->skb before the skb is freed. |
| CVE-2024-40936 | In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix memregion leaks in devm_cxl_add_region() Move the mode verification to __create_region() before allocating the memregion to avoid the memregion leaks. |
| CVE-2024-40935 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: flush all requests after setting CACHEFILES_DEAD In ondemand mode, when the daemon is processing an open request, if the kernel flags the cache as CACHEFILES_DEAD, the cachefiles_daemon_write() will always return -EIO, so the daemon can't pass the copen to the kernel. Then the kernel process that is waiting for the copen triggers a hung_task. Since the DEAD state is irreversible, it can only be exited by closing /dev/cachefiles. Therefore, after calling cachefiles_io_error() to mark the cache as CACHEFILES_DEAD, if in ondemand mode, flush all requests to avoid the above hungtask. We may still be able to read some of the cached data before closing the fd of /dev/cachefiles. Note that this relies on the patch that adds reference counting to the req, otherwise it may UAF. |
| CVE-2024-40934 | In the Linux kernel, the following vulnerability has been resolved: HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode() Fix a memory leak on logi_dj_recv_send_report() error path. |
| CVE-2024-40933 | In the Linux kernel, the following vulnerability has been resolved: iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe() When devm_regmap_init_i2c() fails, regmap_ee could be error pointer, instead of checking for IS_ERR(regmap_ee), regmap is checked which looks like a copy paste error. |
| CVE-2024-40932 | In the Linux kernel, the following vulnerability has been resolved: drm/exynos/vidi: fix memory leak in .get_modes() The duplicated EDID is never freed. Fix it. |
| CVE-2024-40931 | In the Linux kernel, the following vulnerability has been resolved: mptcp: ensure snd_una is properly initialized on connect This is strictly related to commit fb7a0d334894 ("mptcp: ensure snd_nxt is properly initialized on connect"). It turns out that syzkaller can trigger the retransmit after fallback and before processing any other incoming packet - so that snd_una is still left uninitialized. Address the issue explicitly initializing snd_una together with snd_nxt and write_seq. |
| CVE-2024-40930 | In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate HE operation element parsing Validate that the HE operation element has the correct length before parsing it. |
| CVE-2024-40929 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: check n_ssids before accessing the ssids In some versions of cfg80211, the ssids poinet might be a valid one even though n_ssids is 0. Accessing the pointer in this case will cuase an out-of-bound access. Fix this by checking n_ssids first. |
| CVE-2024-40928 | In the Linux kernel, the following vulnerability has been resolved: net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool() Clang static checker (scan-build) warning: net/ethtool/ioctl.c:line 2233, column 2 Called function pointer is null (null dereference). Return '-EOPNOTSUPP' when 'ops->get_ethtool_phy_stats' is NULL to fix this typo error. |
| CVE-2024-40927 | In the Linux kernel, the following vulnerability has been resolved: xhci: Handle TD clearing for multiple streams case When multiple streams are in use, multiple TDs might be in flight when an endpoint is stopped. We need to issue a Set TR Dequeue Pointer for each, to ensure everything is reset properly and the caches cleared. Change the logic so that any N>1 TDs found active for different streams are deferred until after the first one is processed, calling xhci_invalidate_cancelled_tds() again from xhci_handle_cmd_set_deq() to queue another command until we are done with all of them. Also change the error/"should never happen" paths to ensure we at least clear any affected TDs, even if we can't issue a command to clear the hardware cache, and complain loudly with an xhci_warn() if this ever happens. This problem case dates back to commit e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.") early on in the XHCI driver's life, when stream support was first added. It was then identified but not fixed nor made into a warning in commit 674f8438c121 ("xhci: split handling halted endpoints into two steps"), which added a FIXME comment for the problem case (without materially changing the behavior as far as I can tell, though the new logic made the problem more obvious). Then later, in commit 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs."), it was acknowledged again. [Mathias: commit 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs.") was a targeted regression fix to the previously mentioned patch. Users reported issues with usb stuck after unmounting/disconnecting UAS devices. This rolled back the TD clearing of multiple streams to its original state.] Apparently the commit author was aware of the problem (yet still chose to submit it): It was still mentioned as a FIXME, an xhci_dbg() was added to log the problem condition, and the remaining issue was mentioned in the commit description. The choice of making the log type xhci_dbg() for what is, at this point, a completely unhandled and known broken condition is puzzling and unfortunate, as it guarantees that no actual users would see the log in production, thereby making it nigh undebuggable (indeed, even if you turn on DEBUG, the message doesn't really hint at there being a problem at all). It took me *months* of random xHC crashes to finally find a reliable repro and be able to do a deep dive debug session, which could all have been avoided had this unhandled, broken condition been actually reported with a warning, as it should have been as a bug intentionally left in unfixed (never mind that it shouldn't have been left in at all). > Another fix to solve clearing the caches of all stream rings with > cancelled TDs is needed, but not as urgent. 3 years after that statement and 14 years after the original bug was introduced, I think it's finally time to fix it. And maybe next time let's not leave bugs unfixed (that are actually worse than the original bug), and let's actually get people to review kernel commits please. Fixes xHC crashes and IOMMU faults with UAS devices when handling errors/faults. Easiest repro is to use `hdparm` to mark an early sector (e.g. 1024) on a disk as bad, then `cat /dev/sdX > /dev/null` in a loop. At least in the case of JMicron controllers, the read errors end up having to cancel two TDs (for two queued requests to different streams) and the one that didn't get cleared properly ends up faulting the xHC entirely when it tries to access DMA pages that have since been unmapped, referred to by the stale TDs. This normally happens quickly (after two or three loops). After this fix, I left the `cat` in a loop running overnight and experienced no xHC failures, with all read errors recovered properly. Repro'd and tested on an Apple M1 Mac Mini (dwc3 host). On systems without an IOMMU, this bug would instead silently corrupt freed memory, making this a ---truncated--- |
| CVE-2024-40926 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: don't attempt to schedule hpd_work on headless cards If the card doesn't have display hardware, hpd_work and hpd_lock are left uninitialized which causes BUG when attempting to schedule hpd_work on runtime PM resume. Fix it by adding headless flag to DRM and skip any hpd if it's set. |
| CVE-2024-40925 | In the Linux kernel, the following vulnerability has been resolved: block: fix request.queuelist usage in flush Friedrich Weber reported a kernel crash problem and bisected to commit 81ada09cc25e ("blk-flush: reuse rq queuelist in flush state machine"). The root cause is that we use "list_move_tail(&rq->queuelist, pending)" in the PREFLUSH/POSTFLUSH sequences. But rq->queuelist.next == xxx since it's popped out from plug->cached_rq in __blk_mq_alloc_requests_batch(). We don't initialize its queuelist just for this first request, although the queuelist of all later popped requests will be initialized. Fix it by changing to use "list_add_tail(&rq->queuelist, pending)" so rq->queuelist doesn't need to be initialized. It should be ok since rq can't be on any list when PREFLUSH or POSTFLUSH, has no move actually. Please note the commit 81ada09cc25e ("blk-flush: reuse rq queuelist in flush state machine") also has another requirement that no drivers would touch rq->queuelist after blk_mq_end_request() since we will reuse it to add rq to the post-flush pending list in POSTFLUSH. If this is not true, we will have to revert that commit IMHO. This updated version adds "list_del_init(&rq->queuelist)" in flush rq callback since the dm layer may submit request of a weird invalid format (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH), which causes double list_add if without this "list_del_init(&rq->queuelist)". The weird invalid format problem should be fixed in dm layer. |
| CVE-2024-40924 | In the Linux kernel, the following vulnerability has been resolved: drm/i915/dpt: Make DPT object unshrinkable In some scenarios, the DPT object gets shrunk but the actual framebuffer did not and thus its still there on the DPT's vm->bound_list. Then it tries to rewrite the PTEs via a stale CPU mapping. This causes panic. [vsyrjala: Add TODO comment] (cherry picked from commit 51064d471c53dcc8eddd2333c3f1c1d9131ba36c) |
| CVE-2024-40923 | In the Linux kernel, the following vulnerability has been resolved: vmxnet3: disable rx data ring on dma allocation failure When vmxnet3_rq_create() fails to allocate memory for rq->data_ring.base, the subsequent call to vmxnet3_rq_destroy_all_rxdataring does not reset rq->data_ring.desc_size for the data ring that failed, which presumably causes the hypervisor to reference it on packet reception. To fix this bug, rq->data_ring.desc_size needs to be set to 0 to tell the hypervisor to disable this feature. [ 95.436876] kernel BUG at net/core/skbuff.c:207! [ 95.439074] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 95.440411] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.9.3-dirty #1 [ 95.441558] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 12/12/2018 [ 95.443481] RIP: 0010:skb_panic+0x4d/0x4f [ 95.444404] Code: 4f 70 50 8b 87 c0 00 00 00 50 8b 87 bc 00 00 00 50 ff b7 d0 00 00 00 4c 8b 8f c8 00 00 00 48 c7 c7 68 e8 be 9f e8 63 58 f9 ff <0f> 0b 48 8b 14 24 48 c7 c1 d0 73 65 9f e8 a1 ff ff ff 48 8b 14 24 [ 95.447684] RSP: 0018:ffffa13340274dd0 EFLAGS: 00010246 [ 95.448762] RAX: 0000000000000089 RBX: ffff8fbbc72b02d0 RCX: 000000000000083f [ 95.450148] RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000083f [ 95.451520] RBP: 000000000000002d R08: 0000000000000000 R09: ffffa13340274c60 [ 95.452886] R10: ffffffffa04ed468 R11: 0000000000000002 R12: 0000000000000000 [ 95.454293] R13: ffff8fbbdab3c2d0 R14: ffff8fbbdbd829e0 R15: ffff8fbbdbd809e0 [ 95.455682] FS: 0000000000000000(0000) GS:ffff8fbeefd80000(0000) knlGS:0000000000000000 [ 95.457178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.458340] CR2: 00007fd0d1f650c8 CR3: 0000000115f28000 CR4: 00000000000406f0 [ 95.459791] Call Trace: [ 95.460515] <IRQ> [ 95.461180] ? __die_body.cold+0x19/0x27 [ 95.462150] ? die+0x2e/0x50 [ 95.462976] ? do_trap+0xca/0x110 [ 95.463973] ? do_error_trap+0x6a/0x90 [ 95.464966] ? skb_panic+0x4d/0x4f [ 95.465901] ? exc_invalid_op+0x50/0x70 [ 95.466849] ? skb_panic+0x4d/0x4f [ 95.467718] ? asm_exc_invalid_op+0x1a/0x20 [ 95.468758] ? skb_panic+0x4d/0x4f [ 95.469655] skb_put.cold+0x10/0x10 [ 95.470573] vmxnet3_rq_rx_complete+0x862/0x11e0 [vmxnet3] [ 95.471853] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3] [ 95.473185] __napi_poll+0x2b/0x160 [ 95.474145] net_rx_action+0x2c6/0x3b0 [ 95.475115] handle_softirqs+0xe7/0x2a0 [ 95.476122] __irq_exit_rcu+0x97/0xb0 [ 95.477109] common_interrupt+0x85/0xa0 [ 95.478102] </IRQ> [ 95.478846] <TASK> [ 95.479603] asm_common_interrupt+0x26/0x40 [ 95.480657] RIP: 0010:pv_native_safe_halt+0xf/0x20 [ 95.481801] Code: 22 d7 e9 54 87 01 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d 93 ba 3b 00 fb f4 <e9> 2c 87 01 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 [ 95.485563] RSP: 0018:ffffa133400ffe58 EFLAGS: 00000246 [ 95.486882] RAX: 0000000000004000 RBX: ffff8fbbc1d14064 RCX: 0000000000000000 [ 95.488477] RDX: ffff8fbeefd80000 RSI: ffff8fbbc1d14000 RDI: 0000000000000001 [ 95.490067] RBP: ffff8fbbc1d14064 R08: ffffffffa0652260 R09: 00000000000010d3 [ 95.491683] R10: 0000000000000018 R11: ffff8fbeefdb4764 R12: ffffffffa0652260 [ 95.493389] R13: ffffffffa06522e0 R14: 0000000000000001 R15: 0000000000000000 [ 95.495035] acpi_safe_halt+0x14/0x20 [ 95.496127] acpi_idle_do_entry+0x2f/0x50 [ 95.497221] acpi_idle_enter+0x7f/0xd0 [ 95.498272] cpuidle_enter_state+0x81/0x420 [ 95.499375] cpuidle_enter+0x2d/0x40 [ 95.500400] do_idle+0x1e5/0x240 [ 95.501385] cpu_startup_entry+0x29/0x30 [ 95.502422] start_secondary+0x11c/0x140 [ 95.503454] common_startup_64+0x13e/0x141 [ 95.504466] </TASK> [ 95.505197] Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ip ---truncated--- |
| CVE-2024-40922 | In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: don't lock while !TASK_RUNNING There is a report of io_rsrc_ref_quiesce() locking a mutex while not TASK_RUNNING, which is due to forgetting restoring the state back after io_run_task_work_sig() and attempts to break out of the waiting loop. do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff815d2494>] prepare_to_wait+0xa4/0x380 kernel/sched/wait.c:237 WARNING: CPU: 2 PID: 397056 at kernel/sched/core.c:10099 __might_sleep+0x114/0x160 kernel/sched/core.c:10099 RIP: 0010:__might_sleep+0x114/0x160 kernel/sched/core.c:10099 Call Trace: <TASK> __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0xb4/0x940 kernel/locking/mutex.c:752 io_rsrc_ref_quiesce+0x590/0x940 io_uring/rsrc.c:253 io_sqe_buffers_unregister+0xa2/0x340 io_uring/rsrc.c:799 __io_uring_register io_uring/register.c:424 [inline] __do_sys_io_uring_register+0x5b9/0x2400 io_uring/register.c:613 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd8/0x270 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6f/0x77 |
| CVE-2024-40921 | In the Linux kernel, the following vulnerability has been resolved: net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state Pass the already obtained vlan group pointer to br_mst_vlan_set_state() instead of dereferencing it again. Each caller has already correctly dereferenced it for their context. This change is required for the following suspicious RCU dereference fix. No functional changes intended. |
| CVE-2024-40920 | In the Linux kernel, the following vulnerability has been resolved: net: bridge: mst: fix suspicious rcu usage in br_mst_set_state I converted br_mst_set_state to RCU to avoid a vlan use-after-free but forgot to change the vlan group dereference helper. Switch to vlan group RCU deref helper to fix the suspicious rcu usage warning. |
| CVE-2024-40919 | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send() In case of token is released due to token->state == BNXT_HWRM_DEFERRED, released token (set to NULL) is used in log messages. This issue is expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But this error code is returned by recent firmware. So some firmware may not return it. This may lead to NULL pointer dereference. Adjust this issue by adding token pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-40918 | In the Linux kernel, the following vulnerability has been resolved: parisc: Try to fix random segmentation faults in package builds PA-RISC systems with PA8800 and PA8900 processors have had problems with random segmentation faults for many years. Systems with earlier processors are much more stable. Systems with PA8800 and PA8900 processors have a large L2 cache which needs per page flushing for decent performance when a large range is flushed. The combined cache in these systems is also more sensitive to non-equivalent aliases than the caches in earlier systems. The majority of random segmentation faults that I have looked at appear to be memory corruption in memory allocated using mmap and malloc. My first attempt at fixing the random faults didn't work. On reviewing the cache code, I realized that there were two issues which the existing code didn't handle correctly. Both relate to cache move-in. Another issue is that the present bit in PTEs is racy. 1) PA-RISC caches have a mind of their own and they can speculatively load data and instructions for a page as long as there is a entry in the TLB for the page which allows move-in. TLBs are local to each CPU. Thus, the TLB entry for a page must be purged before flushing the page. This is particularly important on SMP systems. In some of the flush routines, the flush routine would be called and then the TLB entry would be purged. This was because the flush routine needed the TLB entry to do the flush. 2) My initial approach to trying the fix the random faults was to try and use flush_cache_page_if_present for all flush operations. This actually made things worse and led to a couple of hardware lockups. It finally dawned on me that some lines weren't being flushed because the pte check code was racy. This resulted in random inequivalent mappings to physical pages. The __flush_cache_page tmpalias flush sets up its own TLB entry and it doesn't need the existing TLB entry. As long as we can find the pte pointer for the vm page, we can get the pfn and physical address of the page. We can also purge the TLB entry for the page before doing the flush. Further, __flush_cache_page uses a special TLB entry that inhibits cache move-in. When switching page mappings, we need to ensure that lines are removed from the cache. It is not sufficient to just flush the lines to memory as they may come back. This made it clear that we needed to implement all the required flush operations using tmpalias routines. This includes flushes for user and kernel pages. After modifying the code to use tmpalias flushes, it became clear that the random segmentation faults were not fully resolved. The frequency of faults was worse on systems with a 64 MB L2 (PA8900) and systems with more CPUs (rp4440). The warning that I added to flush_cache_page_if_present to detect pages that couldn't be flushed triggered frequently on some systems. Helge and I looked at the pages that couldn't be flushed and found that the PTE was either cleared or for a swap page. Ignoring pages that were swapped out seemed okay but pages with cleared PTEs seemed problematic. I looked at routines related to pte_clear and noticed ptep_clear_flush. The default implementation just flushes the TLB entry. However, it was obvious that on parisc we need to flush the cache page as well. If we don't flush the cache page, stale lines will be left in the cache and cause random corruption. Once a PTE is cleared, there is no way to find the physical address associated with the PTE and flush the associated page at a later time. I implemented an updated change with a parisc specific version of ptep_clear_flush. It fixed the random data corruption on Helge's rp4440 and rp3440, as well as on my c8000. At this point, I realized that I could restore the code where we only flush in flush_cache_page_if_present if the page has been accessed. However, for this, we also need to flush the cache when the accessed bit is cleared in ---truncated--- |
| CVE-2024-40917 | In the Linux kernel, the following vulnerability has been resolved: memblock: make memblock_set_node() also warn about use of MAX_NUMNODES On an (old) x86 system with SRAT just covering space above 4Gb: ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0xfffffffff] hotplug the commit referenced below leads to this NUMA configuration no longer being refused by a CONFIG_NUMA=y kernel (previously NUMA: nodes only cover 6144MB of your 8185MB e820 RAM. Not used. No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000027fffffff] was seen in the log directly after the message quoted above), because of memblock_validate_numa_coverage() checking for NUMA_NO_NODE (only). This in turn led to memblock_alloc_range_nid()'s warning about MAX_NUMNODES triggering, followed by a NULL deref in memmap_init() when trying to access node 64's (NODE_SHIFT=6) node data. To compensate said change, make memblock_set_node() warn on and adjust a passed in value of MAX_NUMNODES, just like various other functions already do. |
| CVE-2024-40916 | In the Linux kernel, the following vulnerability has been resolved: drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found When reading EDID fails and driver reports no modes available, the DRM core adds an artificial 1024x786 mode to the connector. Unfortunately some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not able to drive such mode, so report a safe 640x480 mode instead of nothing in case of the EDID reading failure. This fixes the following issue observed on Trats2 board since commit 13d5b040363c ("drm/exynos: do not return negative values from .get_modes()"): [drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops) exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) exynos-dsi 11c80000.dsi: [drm:samsung_dsim_host_attach] Attached s6e8aa0 device (lanes:4 bpp:24 mode-flags:0x10b) exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops) exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 exynos-hdmi 12d00000.hdmi: [drm:hdmiphy_enable.part.0] *ERROR* PLL could not reach steady state panel-samsung-s6e8aa0 11c80000.dsi.0: ID: 0xa2, 0x20, 0x8c exynos-mixer 12c10000.mixer: timeout waiting for VSYNC ------------[ cut here ]------------ WARNING: CPU: 1 PID: 11 at drivers/gpu/drm/drm_atomic_helper.c:1682 drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8 [CRTC:70:crtc-1] vblank wait timed out Modules linked in: CPU: 1 PID: 11 Comm: kworker/u16:0 Not tainted 6.9.0-rc5-next-20240424 #14913 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events_unbound deferred_probe_work_func Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x68/0x88 dump_stack_lvl from __warn+0x7c/0x1c4 __warn from warn_slowpath_fmt+0x11c/0x1a8 warn_slowpath_fmt from drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8 drm_atomic_helper_wait_for_vblanks.part.0 from drm_atomic_helper_commit_tail_rpm+0x7c/0x8c drm_atomic_helper_commit_tail_rpm from commit_tail+0x9c/0x184 commit_tail from drm_atomic_helper_commit+0x168/0x190 drm_atomic_helper_commit from drm_atomic_commit+0xb4/0xe0 drm_atomic_commit from drm_client_modeset_commit_atomic+0x23c/0x27c drm_client_modeset_commit_atomic from drm_client_modeset_commit_locked+0x60/0x1cc drm_client_modeset_commit_locked from drm_client_modeset_commit+0x24/0x40 drm_client_modeset_commit from __drm_fb_helper_restore_fbdev_mode_unlocked+0x9c/0xc4 __drm_fb_helper_restore_fbdev_mode_unlocked from drm_fb_helper_set_par+0x2c/0x3c drm_fb_helper_set_par from fbcon_init+0x3d8/0x550 fbcon_init from visual_init+0xc0/0x108 visual_init from do_bind_con_driver+0x1b8/0x3a4 do_bind_con_driver from do_take_over_console+0x140/0x1ec do_take_over_console from do_fbcon_takeover+0x70/0xd0 do_fbcon_takeover from fbcon_fb_registered+0x19c/0x1ac fbcon_fb_registered from register_framebuffer+0x190/0x21c register_framebuffer from __drm_fb_helper_initial_config_and_unlock+0x350/0x574 __drm_fb_helper_initial_config_and_unlock from exynos_drm_fbdev_client_hotplug+0x6c/0xb0 exynos_drm_fbdev_client_hotplug from drm_client_register+0x58/0x94 drm_client_register from exynos_drm_bind+0x160/0x190 exynos_drm_bind from try_to_bring_up_aggregate_device+0x200/0x2d8 try_to_bring_up_aggregate_device from __component_add+0xb0/0x170 __component_add from mixer_probe+0x74/0xcc mixer_probe from platform_probe+0x5c/0xb8 platform_probe from really_probe+0xe0/0x3d8 really_probe from __driver_probe_device+0x9c/0x1e4 __driver_probe_device from driver_probe_device+0x30/0xc0 driver_probe_device from __device_attach_driver+0xa8/0x120 __device_attach_driver from bus_for_each_drv+0x80/0xcc bus_for_each_drv from __device_attach+0xac/0x1fc __device_attach from bus_probe_device+0x8c/0x90 bus_probe_device from deferred_probe_work_func+0 ---truncated--- |
| CVE-2024-40915 | In the Linux kernel, the following vulnerability has been resolved: riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context __kernel_map_pages() is a debug function which clears the valid bit in page table entry for deallocated pages to detect illegal memory accesses to freed pages. This function set/clear the valid bit using __set_memory(). __set_memory() acquires init_mm's semaphore, and this operation may sleep. This is problematic, because __kernel_map_pages() can be called in atomic context, and thus is illegal to sleep. An example warning that this causes: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1578 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd preempt_count: 2, expected: 0 CPU: 0 PID: 2 Comm: kthreadd Not tainted 6.9.0-g1d4c6d784ef6 #37 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff800060dc>] dump_backtrace+0x1c/0x24 [<ffffffff8091ef6e>] show_stack+0x2c/0x38 [<ffffffff8092baf8>] dump_stack_lvl+0x5a/0x72 [<ffffffff8092bb24>] dump_stack+0x14/0x1c [<ffffffff8003b7ac>] __might_resched+0x104/0x10e [<ffffffff8003b7f4>] __might_sleep+0x3e/0x62 [<ffffffff8093276a>] down_write+0x20/0x72 [<ffffffff8000cf00>] __set_memory+0x82/0x2fa [<ffffffff8000d324>] __kernel_map_pages+0x5a/0xd4 [<ffffffff80196cca>] __alloc_pages_bulk+0x3b2/0x43a [<ffffffff8018ee82>] __vmalloc_node_range+0x196/0x6ba [<ffffffff80011904>] copy_process+0x72c/0x17ec [<ffffffff80012ab4>] kernel_clone+0x60/0x2fe [<ffffffff80012f62>] kernel_thread+0x82/0xa0 [<ffffffff8003552c>] kthreadd+0x14a/0x1be [<ffffffff809357de>] ret_from_fork+0xe/0x1c Rewrite this function with apply_to_existing_page_range(). It is fine to not have any locking, because __kernel_map_pages() works with pages being allocated/deallocated and those pages are not changed by anyone else in the meantime. |
| CVE-2024-40914 | In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: don't unpoison huge_zero_folio When I did memory failure tests recently, below panic occurs: kernel BUG at include/linux/mm.h:1135! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 PID: 137 Comm: kswapd1 Not tainted 6.9.0-rc4-00491-gd5ce28f156fe-dirty #14 RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0 RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246 RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0 RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492 R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00 FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0 Call Trace: <TASK> do_shrink_slab+0x14f/0x6a0 shrink_slab+0xca/0x8c0 shrink_node+0x2d0/0x7d0 balance_pgdat+0x33a/0x720 kswapd+0x1f3/0x410 kthread+0xd5/0x100 ret_from_fork+0x2f/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: mce_inject hwpoison_inject ---[ end trace 0000000000000000 ]--- RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0 RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246 RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0 RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492 R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00 FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0 The root cause is that HWPoison flag will be set for huge_zero_folio without increasing the folio refcnt. But then unpoison_memory() will decrease the folio refcnt unexpectedly as it appears like a successfully hwpoisoned folio leading to VM_BUG_ON_PAGE(page_ref_count(page) == 0) when releasing huge_zero_folio. Skip unpoisoning huge_zero_folio in unpoison_memory() to fix this issue. We're not prepared to unpoison huge_zero_folio yet. |
| CVE-2024-40913 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: defer exposing anon_fd until after copy_to_user() succeeds After installing the anonymous fd, we can now see it in userland and close it. However, at this point we may not have gotten the reference count of the cache, but we will put it during colse fd, so this may cause a cache UAF. So grab the cache reference count before fd_install(). In addition, by kernel convention, fd is taken over by the user land after fd_install(), and the kernel should not call close_fd() after that, i.e., it should call fd_install() after everything is ready, thus fd_install() is called after copy_to_user() succeeds. |
| CVE-2024-40912 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix deadlock in ieee80211_sta_ps_deliver_wakeup() The ieee80211_sta_ps_deliver_wakeup() function takes sta->ps_lock to synchronizes with ieee80211_tx_h_unicast_ps_buf() which is called from softirq context. However using only spin_lock() to get sta->ps_lock in ieee80211_sta_ps_deliver_wakeup() does not prevent softirq to execute on this same CPU, to run ieee80211_tx_h_unicast_ps_buf() and try to take this same lock ending in deadlock. Below is an example of rcu stall that arises in such situation. rcu: INFO: rcu_sched self-detected stall on CPU rcu: 2-....: (42413413 ticks this GP) idle=b154/1/0x4000000000000000 softirq=1763/1765 fqs=21206996 rcu: (t=42586894 jiffies g=2057 q=362405 ncpus=4) CPU: 2 PID: 719 Comm: wpa_supplicant Tainted: G W 6.4.0-02158-g1b062f552873 #742 Hardware name: RPT (r1) (DT) pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : queued_spin_lock_slowpath+0x58/0x2d0 lr : invoke_tx_handlers_early+0x5b4/0x5c0 sp : ffff00001ef64660 x29: ffff00001ef64660 x28: ffff000009bc1070 x27: ffff000009bc0ad8 x26: ffff000009bc0900 x25: ffff00001ef647a8 x24: 0000000000000000 x23: ffff000009bc0900 x22: ffff000009bc0900 x21: ffff00000ac0e000 x20: ffff00000a279e00 x19: ffff00001ef646e8 x18: 0000000000000000 x17: ffff800016468000 x16: ffff00001ef608c0 x15: 0010533c93f64f80 x14: 0010395c9faa3946 x13: 0000000000000000 x12: 00000000fa83b2da x11: 000000012edeceea x10: ffff0000010fbe00 x9 : 0000000000895440 x8 : 000000000010533c x7 : ffff00000ad8b740 x6 : ffff00000c350880 x5 : 0000000000000007 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00000ac0e0e8 Call trace: queued_spin_lock_slowpath+0x58/0x2d0 ieee80211_tx+0x80/0x12c ieee80211_tx_pending+0x110/0x278 tasklet_action_common.constprop.0+0x10c/0x144 tasklet_action+0x20/0x28 _stext+0x11c/0x284 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 do_softirq+0x74/0x7c __local_bh_enable_ip+0xa0/0xa4 _ieee80211_wake_txqs+0x3b0/0x4b8 __ieee80211_wake_queue+0x12c/0x168 ieee80211_add_pending_skbs+0xec/0x138 ieee80211_sta_ps_deliver_wakeup+0x2a4/0x480 ieee80211_mps_sta_status_update.part.0+0xd8/0x11c ieee80211_mps_sta_status_update+0x18/0x24 sta_apply_parameters+0x3bc/0x4c0 ieee80211_change_station+0x1b8/0x2dc nl80211_set_station+0x444/0x49c genl_family_rcv_msg_doit.isra.0+0xa4/0xfc genl_rcv_msg+0x1b0/0x244 netlink_rcv_skb+0x38/0x10c genl_rcv+0x34/0x48 netlink_unicast+0x254/0x2bc netlink_sendmsg+0x190/0x3b4 ____sys_sendmsg+0x1e8/0x218 ___sys_sendmsg+0x68/0x8c __sys_sendmsg+0x44/0x84 __arm64_sys_sendmsg+0x20/0x28 do_el0_svc+0x6c/0xe8 el0_svc+0x14/0x48 el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x14c/0x150 Using spin_lock_bh()/spin_unlock_bh() instead prevents softirq to raise on the same CPU that is holding the lock. |
| CVE-2024-40911 | In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Lock wiphy in cfg80211_get_station Wiphy should be locked before calling rdev_get_station() (see lockdep assert in ieee80211_get_station()). This fixes the following kernel NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705 Hardware name: RPT (r1) (DT) Workqueue: bat_events batadv_v_elp_throughput_metric_update pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core] lr : sta_set_sinfo+0xcc/0xbd4 sp : ffff000007b43ad0 x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98 x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000 x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000 x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000 x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000 x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90 x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000 Call trace: ath10k_sta_statistics+0x10/0x2dc [ath10k_core] sta_set_sinfo+0xcc/0xbd4 ieee80211_get_station+0x2c/0x44 cfg80211_get_station+0x80/0x154 batadv_v_elp_get_throughput+0x138/0x1fc batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x1ec/0x414 worker_thread+0x70/0x46c kthread+0xdc/0xe0 ret_from_fork+0x10/0x20 Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814) This happens because STA has time to disconnect and reconnect before batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In this situation, ath10k_sta_state() can be in the middle of resetting arsta data when the work queue get chance to be scheduled and ends up accessing it. Locking wiphy prevents that. |
| CVE-2024-40910 | In the Linux kernel, the following vulnerability has been resolved: ax25: Fix refcount imbalance on inbound connections When releasing a socket in ax25_release(), we call netdev_put() to decrease the refcount on the associated ax.25 device. However, the execution path for accepting an incoming connection never calls netdev_hold(). This imbalance leads to refcount errors, and ultimately to kernel crashes. A typical call trace for the above situation will start with one of the following errors: refcount_t: decrement hit 0; leaking memory. refcount_t: underflow; use-after-free. And will then have a trace like: Call Trace: <TASK> ? show_regs+0x64/0x70 ? __warn+0x83/0x120 ? refcount_warn_saturate+0xb2/0x100 ? report_bug+0x158/0x190 ? prb_read_valid+0x20/0x30 ? handle_bug+0x3e/0x70 ? exc_invalid_op+0x1c/0x70 ? asm_exc_invalid_op+0x1f/0x30 ? refcount_warn_saturate+0xb2/0x100 ? refcount_warn_saturate+0xb2/0x100 ax25_release+0x2ad/0x360 __sock_release+0x35/0xa0 sock_close+0x19/0x20 [...] On reboot (or any attempt to remove the interface), the kernel gets stuck in an infinite loop: unregister_netdevice: waiting for ax0 to become free. Usage count = 0 This patch corrects these issues by ensuring that we call netdev_hold() and ax25_dev_hold() for new connections in ax25_accept(). This makes the logic leading to ax25_accept() match the logic for ax25_bind(): in both cases we increment the refcount, which is ultimately decremented in ax25_release(). |
| CVE-2024-40909 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a potential use-after-free in bpf_link_free() After commit 1a80dbcb2dba, bpf_link can be freed by link->ops->dealloc_deferred, but the code still tests and uses link->ops->dealloc afterward, which leads to a use-after-free as reported by syzbot. Actually, one of them should be sufficient, so just call one of them instead of both. Also add a WARN_ON() in case of any problematic implementation. |
| CVE-2024-40908 | In the Linux kernel, the following vulnerability has been resolved: bpf: Set run context for rawtp test_run callback syzbot reported crash when rawtp program executed through the test_run interface calls bpf_get_attach_cookie helper or any other helper that touches task->bpf_ctx pointer. Setting the run context (task->bpf_ctx pointer) for test_run callback. |
| CVE-2024-40907 | In the Linux kernel, the following vulnerability has been resolved: ionic: fix kernel panic in XDP_TX action In the XDP_TX path, ionic driver sends a packet to the TX path with rx page and corresponding dma address. After tx is done, ionic_tx_clean() frees that page. But RX ring buffer isn't reset to NULL. So, it uses a freed page, which causes kernel panic. BUG: unable to handle page fault for address: ffff8881576c110c PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060 Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8 RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283 RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002 RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8 R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100 FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x254/0x790 ? __pfx_page_fault_oops+0x10/0x10 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? search_bpf_extables+0x165/0x260 ? fixup_exception+0x4a/0x970 ? exc_page_fault+0xcb/0xe0 ? asm_exc_page_fault+0x22/0x30 ? 0xffffffffc0051f64 ? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f ? do_raw_spin_unlock+0x54/0x220 ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x7e7/0xc30 ? __pfx_net_rx_action+0x10/0x10 |
| CVE-2024-40906 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Always stop health timer during driver removal Currently, if teardown_hca fails to execute during driver removal, mlx5 does not stop the health timer. Afterwards, mlx5 continue with driver teardown. This may lead to a UAF bug, which results in page fault Oops[1], since the health timer invokes after resources were freed. Hence, stop the health monitor even if teardown_hca fails. [1] mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: cleanup mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup BUG: unable to handle page fault for address: ffffa26487064230 PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 RIP: 0010:ioread32be+0x34/0x60 RSP: 0018:ffffa26480003e58 EFLAGS: 00010292 RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0 RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230 RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8 R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0 R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0 FS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x175/0x180 ? asm_exc_page_fault+0x26/0x30 ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? ioread32be+0x34/0x60 mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] poll_health+0x42/0x230 [mlx5_core] ? __next_timer_interrupt+0xbc/0x110 ? __pfx_poll_health+0x10/0x10 [mlx5_core] call_timer_fn+0x21/0x130 ? __pfx_poll_health+0x10/0x10 [mlx5_core] __run_timers+0x222/0x2c0 run_timer_softirq+0x1d/0x40 __do_softirq+0xc9/0x2c8 __irq_exit_rcu+0xa6/0xc0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:cpuidle_enter_state+0xcc/0x440 ? cpuidle_enter_state+0xbd/0x440 cpuidle_enter+0x2d/0x40 do_idle+0x20d/0x270 cpu_startup_entry+0x2a/0x30 rest_init+0xd0/0xd0 arch_call_rest_init+0xe/0x30 start_kernel+0x709/0xa90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x96/0xa0 secondary_startup_64_no_verify+0x18f/0x19b ---[ end trace 0000000000000000 ]--- |
| CVE-2024-40905 | In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible race in __fib6_drop_pcpu_from() syzbot found a race in __fib6_drop_pcpu_from() [1] If compiler reads more than once (*ppcpu_rt), second read could read NULL, if another cpu clears the value in rt6_get_pcpu_route(). Add a READ_ONCE() to prevent this race. Also add rcu_read_lock()/rcu_read_unlock() because we rely on RCU protection while dereferencing pcpu_rt. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 7543 Comm: kworker/u8:17 Not tainted 6.10.0-rc1-syzkaller-00013-g2bfcfd584ff5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Workqueue: netns cleanup_net RIP: 0010:__fib6_drop_pcpu_from.part.0+0x10a/0x370 net/ipv6/ip6_fib.c:984 Code: f8 48 c1 e8 03 80 3c 28 00 0f 85 16 02 00 00 4d 8b 3f 4d 85 ff 74 31 e8 74 a7 fa f7 49 8d bf 90 00 00 00 48 89 f8 48 c1 e8 03 <80> 3c 28 00 0f 85 1e 02 00 00 49 8b 87 90 00 00 00 48 8b 0c 24 48 RSP: 0018:ffffc900040df070 EFLAGS: 00010206 RAX: 0000000000000012 RBX: 0000000000000001 RCX: ffffffff89932e16 RDX: ffff888049dd1e00 RSI: ffffffff89932d7c RDI: 0000000000000091 RBP: dffffc0000000000 R08: 0000000000000005 R09: 0000000000000007 R10: 0000000000000001 R11: 0000000000000006 R12: ffff88807fa080b8 R13: fffffbfff1a9a07d R14: ffffed100ff41022 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32c26000 CR3: 000000005d56e000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __fib6_drop_pcpu_from net/ipv6/ip6_fib.c:966 [inline] fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1027 [inline] fib6_purge_rt+0x7f2/0x9f0 net/ipv6/ip6_fib.c:1038 fib6_del_route net/ipv6/ip6_fib.c:1998 [inline] fib6_del+0xa70/0x17b0 net/ipv6/ip6_fib.c:2043 fib6_clean_node+0x426/0x5b0 net/ipv6/ip6_fib.c:2205 fib6_walk_continue+0x44f/0x8d0 net/ipv6/ip6_fib.c:2127 fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2175 fib6_clean_tree+0xd7/0x120 net/ipv6/ip6_fib.c:2255 __fib6_clean_all+0x100/0x2d0 net/ipv6/ip6_fib.c:2271 rt6_sync_down_dev net/ipv6/route.c:4906 [inline] rt6_disable_ip+0x7ed/0xa00 net/ipv6/route.c:4911 addrconf_ifdown.isra.0+0x117/0x1b40 net/ipv6/addrconf.c:3855 addrconf_notify+0x223/0x19e0 net/ipv6/addrconf.c:3778 notifier_call_chain+0xb9/0x410 kernel/notifier.c:93 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:1992 call_netdevice_notifiers_extack net/core/dev.c:2030 [inline] call_netdevice_notifiers net/core/dev.c:2044 [inline] dev_close_many+0x333/0x6a0 net/core/dev.c:1585 unregister_netdevice_many_notify+0x46d/0x19f0 net/core/dev.c:11193 unregister_netdevice_many net/core/dev.c:11276 [inline] default_device_exit_batch+0x85b/0xae0 net/core/dev.c:11759 ops_exit_list+0x128/0x180 net/core/net_namespace.c:178 cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640 process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 |
| CVE-2024-40904 | In the Linux kernel, the following vulnerability has been resolved: USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). |
| CVE-2024-40903 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps There could be a potential use-after-free case in tcpm_register_source_caps(). This could happen when: * new (say invalid) source caps are advertised * the existing source caps are unregistered * tcpm_register_source_caps() returns with an error as usb_power_delivery_register_capabilities() fails This causes port->partner_source_caps to hold on to the now freed source caps. Reset port->partner_source_caps value to NULL after unregistering existing source caps. |
| CVE-2024-40902 | In the Linux kernel, the following vulnerability has been resolved: jfs: xattr: fix buffer overflow for invalid xattr When an xattr size is not what is expected, it is printed out to the kernel log in hex format as a form of debugging. But when that xattr size is bigger than the expected size, printing it out can cause an access off the end of the buffer. Fix this all up by properly restricting the size of the debug hex dump in the kernel log. |
| CVE-2024-40901 | In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory There is a potential out-of-bounds access when using test_bit() on a single word. The test_bit() and set_bit() functions operate on long values, and when testing or setting a single word, they can exceed the word boundary. KASAN detects this issue and produces a dump: BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965 For full log, please look at [1]. Make the allocation at least the size of sizeof(unsigned long) so that set_bit() and test_bit() have sufficient room for read/write operations without overwriting unallocated memory. [1] Link: https://lore.kernel.org/all/[email protected]/ |
| CVE-2024-40900 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: remove requests from xarray during flushing requests Even with CACHEFILES_DEAD set, we can still read the requests, so in the following concurrency the request may be used after it has been freed: mount | daemon_thread1 | daemon_thread2 ------------------------------------------------------------ cachefiles_ondemand_init_object cachefiles_ondemand_send_req REQ_A = kzalloc(sizeof(*req) + data_len) wait_for_completion(&REQ_A->done) cachefiles_daemon_read cachefiles_ondemand_daemon_read // close dev fd cachefiles_flush_reqs complete(&REQ_A->done) kfree(REQ_A) xa_lock(&cache->reqs); cachefiles_ondemand_select_req req->msg.opcode != CACHEFILES_OP_READ // req use-after-free !!! xa_unlock(&cache->reqs); xa_destroy(&cache->reqs) Hence remove requests from cache->reqs when flushing them to avoid accessing freed requests. |
| CVE-2024-40899 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd() We got the following issue in a fuzz test of randomly issuing the restore command: ================================================================== BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0x609/0xab0 Write of size 4 at addr ffff888109164a80 by task ondemand-04-dae/4962 CPU: 11 PID: 4962 Comm: ondemand-04-dae Not tainted 6.8.0-rc7-dirty #542 Call Trace: kasan_report+0x94/0xc0 cachefiles_ondemand_daemon_read+0x609/0xab0 vfs_read+0x169/0xb50 ksys_read+0xf5/0x1e0 Allocated by task 626: __kmalloc+0x1df/0x4b0 cachefiles_ondemand_send_req+0x24d/0x690 cachefiles_create_tmpfile+0x249/0xb30 cachefiles_create_file+0x6f/0x140 cachefiles_look_up_object+0x29c/0xa60 cachefiles_lookup_cookie+0x37d/0xca0 fscache_cookie_state_machine+0x43c/0x1230 [...] Freed by task 626: kfree+0xf1/0x2c0 cachefiles_ondemand_send_req+0x568/0x690 cachefiles_create_tmpfile+0x249/0xb30 cachefiles_create_file+0x6f/0x140 cachefiles_look_up_object+0x29c/0xa60 cachefiles_lookup_cookie+0x37d/0xca0 fscache_cookie_state_machine+0x43c/0x1230 [...] ================================================================== Following is the process that triggers the issue: mount | daemon_thread1 | daemon_thread2 ------------------------------------------------------------ cachefiles_ondemand_init_object cachefiles_ondemand_send_req REQ_A = kzalloc(sizeof(*req) + data_len) wait_for_completion(&REQ_A->done) cachefiles_daemon_read cachefiles_ondemand_daemon_read REQ_A = cachefiles_ondemand_select_req cachefiles_ondemand_get_fd copy_to_user(_buffer, msg, n) process_open_req(REQ_A) ------ restore ------ cachefiles_ondemand_restore xas_for_each(&xas, req, ULONG_MAX) xas_set_mark(&xas, CACHEFILES_REQ_NEW); cachefiles_daemon_read cachefiles_ondemand_daemon_read REQ_A = cachefiles_ondemand_select_req write(devfd, ("copen %u,%llu", msg->msg_id, size)); cachefiles_ondemand_copen xa_erase(&cache->reqs, id) complete(&REQ_A->done) kfree(REQ_A) cachefiles_ondemand_get_fd(REQ_A) fd = get_unused_fd_flags file = anon_inode_getfile fd_install(fd, file) load = (void *)REQ_A->msg.data; load->fd = fd; // load UAF !!! This issue is caused by issuing a restore command when the daemon is still alive, which results in a request being processed multiple times thus triggering a UAF. So to avoid this problem, add an additional reference count to cachefiles_req, which is held while waiting and reading, and then released when the waiting and reading is over. Note that since there is only one reference count for waiting, we need to avoid the same request being completed multiple times, so we can only complete the request if it is successfully removed from the xarray. |
| CVE-2024-39510 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read() We got the following issue in a fuzz test of randomly issuing the restore command: ================================================================== BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0xb41/0xb60 Read of size 8 at addr ffff888122e84088 by task ondemand-04-dae/963 CPU: 13 PID: 963 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #564 Call Trace: kasan_report+0x93/0xc0 cachefiles_ondemand_daemon_read+0xb41/0xb60 vfs_read+0x169/0xb50 ksys_read+0xf5/0x1e0 Allocated by task 116: kmem_cache_alloc+0x140/0x3a0 cachefiles_lookup_cookie+0x140/0xcd0 fscache_cookie_state_machine+0x43c/0x1230 [...] Freed by task 792: kmem_cache_free+0xfe/0x390 cachefiles_put_object+0x241/0x480 fscache_cookie_state_machine+0x5c8/0x1230 [...] ================================================================== Following is the process that triggers the issue: mount | daemon_thread1 | daemon_thread2 ------------------------------------------------------------ cachefiles_withdraw_cookie cachefiles_ondemand_clean_object(object) cachefiles_ondemand_send_req REQ_A = kzalloc(sizeof(*req) + data_len) wait_for_completion(&REQ_A->done) cachefiles_daemon_read cachefiles_ondemand_daemon_read REQ_A = cachefiles_ondemand_select_req msg->object_id = req->object->ondemand->ondemand_id ------ restore ------ cachefiles_ondemand_restore xas_for_each(&xas, req, ULONG_MAX) xas_set_mark(&xas, CACHEFILES_REQ_NEW) cachefiles_daemon_read cachefiles_ondemand_daemon_read REQ_A = cachefiles_ondemand_select_req copy_to_user(_buffer, msg, n) xa_erase(&cache->reqs, id) complete(&REQ_A->done) ------ close(fd) ------ cachefiles_ondemand_fd_release cachefiles_put_object cachefiles_put_object kmem_cache_free(cachefiles_object_jar, object) REQ_A->object->ondemand->ondemand_id // object UAF !!! When we see the request within xa_lock, req->object must not have been freed yet, so grab the reference count of object before xa_unlock to avoid the above issue. |
| CVE-2024-39509 | In the Linux kernel, the following vulnerability has been resolved: HID: core: remove unnecessary WARN_ON() in implement() Syzkaller hit a warning [1] in a call to implement() when trying to write a value into a field of smaller size in an output report. Since implement() already has a warn message printed out with the help of hid_warn() and value in question gets trimmed with: ... value &= m; ... WARN_ON may be considered superfluous. Remove it to suppress future syzkaller triggers. [1] WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 implement drivers/hid/hid-core.c:1451 [inline] WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863 Modules linked in: CPU: 0 PID: 5084 Comm: syz-executor424 Not tainted 6.9.0-rc7-syzkaller-00183-gcf87f46fd34d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 RIP: 0010:implement drivers/hid/hid-core.c:1451 [inline] RIP: 0010:hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863 ... Call Trace: <TASK> __usbhid_submit_report drivers/hid/usbhid/hid-core.c:591 [inline] usbhid_submit_report+0x43d/0x9e0 drivers/hid/usbhid/hid-core.c:636 hiddev_ioctl+0x138b/0x1f00 drivers/hid/usbhid/hiddev.c:726 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... |
| CVE-2024-39508 | In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: Use set_bit() and test_bit() at worker->flags Utilize set_bit() and test_bit() on worker->flags within io_uring/io-wq to address potential data races. The structure io_worker->flags may be accessed through various data paths, leading to concurrency issues. When KCSAN is enabled, it reveals data races occurring in io_worker_handle_work and io_wq_activate_free_worker functions. BUG: KCSAN: data-race in io_worker_handle_work / io_wq_activate_free_worker write to 0xffff8885c4246404 of 4 bytes by task 49071 on cpu 28: io_worker_handle_work (io_uring/io-wq.c:434 io_uring/io-wq.c:569) io_wq_worker (io_uring/io-wq.c:?) <snip> read to 0xffff8885c4246404 of 4 bytes by task 49024 on cpu 5: io_wq_activate_free_worker (io_uring/io-wq.c:? io_uring/io-wq.c:285) io_wq_enqueue (io_uring/io-wq.c:947) io_queue_iowq (io_uring/io_uring.c:524) io_req_task_submit (io_uring/io_uring.c:1511) io_handle_tw_list (io_uring/io_uring.c:1198) <snip> Line numbers against commit 18daea77cca6 ("Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm"). These races involve writes and reads to the same memory location by different tasks running on different CPUs. To mitigate this, refactor the code to use atomic operations such as set_bit(), test_bit(), and clear_bit() instead of basic "and" and "or" operations. This ensures thread-safe manipulation of worker flags. Also, move `create_index` to avoid holes in the structure. |
| CVE-2024-39507 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash problem in concurrent scenario When link status change, the nic driver need to notify the roce driver to handle this event, but at this time, the roce driver may uninit, then cause kernel crash. To fix the problem, when link status change, need to check whether the roce registered, and when uninit, need to wait link update finish. |
| CVE-2024-39506 | In the Linux kernel, the following vulnerability has been resolved: liquidio: Adjust a NULL pointer handling path in lio_vf_rep_copy_packet In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value, but then it is unconditionally passed to skb_add_rx_frag() which looks strange and could lead to null pointer dereference. lio_vf_rep_copy_packet() call trace looks like: octeon_droq_process_packets octeon_droq_fast_process_packets octeon_droq_dispatch_pkt octeon_create_recv_info ...search in the dispatch_list... ->disp_fn(rdisp->rinfo, ...) lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...) In this path there is no code which sets pg_info->page to NULL. So this check looks unneeded and doesn't solve potential problem. But I guess the author had reason to add a check and I have no such card and can't do real test. In addition, the code in the function liquidio_push_packet() in liquidio/lio_core.c does exactly the same. Based on this, I consider the most acceptable compromise solution to adjust this issue by moving skb_add_rx_frag() into conditional scope. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-39505 | In the Linux kernel, the following vulnerability has been resolved: drm/komeda: check for error-valued pointer komeda_pipeline_get_state() may return an error-valued pointer, thus check the pointer for negative or null value before dereferencing. |
| CVE-2024-39504 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_inner: validate mandatory meta and payload Check for mandatory netlink attributes in payload and meta expression when used embedded from the inner expression, otherwise NULL pointer dereference is possible from userspace. |
| CVE-2024-39503 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type Lion Ackermann reported that there is a race condition between namespace cleanup in ipset and the garbage collection of the list:set type. The namespace cleanup can destroy the list:set type of sets while the gc of the set type is waiting to run in rcu cleanup. The latter uses data from the destroyed set which thus leads use after free. The patch contains the following parts: - When destroying all sets, first remove the garbage collectors, then wait if needed and then destroy the sets. - Fix the badly ordered "wait then remove gc" for the destroy a single set case. - Fix the missing rcu locking in the list:set type in the userspace test case. - Use proper RCU list handlings in the list:set type. The patch depends on c1193d9bbbd3 (netfilter: ipset: Add list flush to cancel_gc). |
| CVE-2024-39502 | In the Linux kernel, the following vulnerability has been resolved: ionic: fix use after netif_napi_del() When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L <interface name> rx 1 tx 1 combined 0 ethtool -L <interface name> rx 0 tx 0 combined 1 ethtool -L <interface name> rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 |
| CVE-2024-39501 | In the Linux kernel, the following vulnerability has been resolved: drivers: core: synchronize really_probe() and dev_uevent() Synchronize the dev->driver usage in really_probe() and dev_uevent(). These can run in different threads, what can result in the following race condition for dev->driver uninitialization: Thread #1: ========== really_probe() { ... probe_failed: ... device_unbind_cleanup(dev) { ... dev->driver = NULL; // <= Failed probe sets dev->driver to NULL ... } ... } Thread #2: ========== dev_uevent() { ... if (dev->driver) // If dev->driver is NULLed from really_probe() from here on, // after above check, the system crashes add_uevent_var(env, "DRIVER=%s", dev->driver->name); ... } really_probe() holds the lock, already. So nothing needs to be done there. dev_uevent() is called with lock held, often, too. But not always. What implies that we can't add any locking in dev_uevent() itself. So fix this race by adding the lock to the non-protected path. This is the path where above race is observed: dev_uevent+0x235/0x380 uevent_show+0x10c/0x1f0 <= Add lock here dev_attr_show+0x3a/0xa0 sysfs_kf_seq_show+0x17c/0x250 kernfs_seq_show+0x7c/0x90 seq_read_iter+0x2d7/0x940 kernfs_fop_read_iter+0xc6/0x310 vfs_read+0x5bc/0x6b0 ksys_read+0xeb/0x1b0 __x64_sys_read+0x42/0x50 x64_sys_call+0x27ad/0x2d30 do_syscall_64+0xcd/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Similar cases are reported by syzkaller in https://syzkaller.appspot.com/bug?extid=ffa8143439596313a85a But these are regarding the *initialization* of dev->driver dev->driver = drv; As this switches dev->driver to non-NULL these reports can be considered to be false-positives (which should be "fixed" by this commit, as well, though). The same issue was reported and tried to be fixed back in 2015 in https://lore.kernel.org/lkml/[email protected]/ already. |
| CVE-2024-39500 | In the Linux kernel, the following vulnerability has been resolved: sock_map: avoid race between sock_map_close and sk_psock_put sk_psock_get will return NULL if the refcount of psock has gone to 0, which will happen when the last call of sk_psock_put is done. However, sk_psock_drop may not have finished yet, so the close callback will still point to sock_map_close despite psock being NULL. This can be reproduced with a thread deleting an element from the sock map, while the second one creates a socket, adds it to the map and closes it. That will trigger the WARN_ON_ONCE: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 7220 at net/core/sock_map.c:1701 sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701 Modules linked in: CPU: 1 PID: 7220 Comm: syz-executor380 Not tainted 6.9.0-syzkaller-07726-g3c999d1ae3c7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 RIP: 0010:sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701 Code: df e8 92 29 88 f8 48 8b 1b 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 79 29 88 f8 4c 8b 23 eb 89 e8 4f 15 23 f8 90 <0f> 0b 90 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d e9 13 26 3d 02 RSP: 0018:ffffc9000441fda8 EFLAGS: 00010293 RAX: ffffffff89731ae1 RBX: ffffffff94b87540 RCX: ffff888029470000 RDX: 0000000000000000 RSI: ffffffff8bcab5c0 RDI: ffffffff8c1faba0 RBP: 0000000000000000 R08: ffffffff92f9b61f R09: 1ffffffff25f36c3 R10: dffffc0000000000 R11: fffffbfff25f36c4 R12: ffffffff89731840 R13: ffff88804b587000 R14: ffff88804b587000 R15: ffffffff89731870 FS: 000055555e080380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000207d4000 CR4: 0000000000350ef0 Call Trace: <TASK> unix_release+0x87/0xc0 net/unix/af_unix.c:1048 __sock_release net/socket.c:659 [inline] sock_close+0xbe/0x240 net/socket.c:1421 __fput+0x42b/0x8a0 fs/file_table.c:422 __do_sys_close fs/open.c:1556 [inline] __se_sys_close fs/open.c:1541 [inline] __x64_sys_close+0x7f/0x110 fs/open.c:1541 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fb37d618070 Code: 00 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d4 e8 10 2c 00 00 80 3d 31 f0 07 00 00 74 17 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c RSP: 002b:00007ffcd4a525d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fb37d618070 RDX: 0000000000000010 RSI: 00000000200001c0 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000100000000 R09: 0000000100000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Use sk_psock, which will only check that the pointer is not been set to NULL yet, which should only happen after the callbacks are restored. If, then, a reference can still be gotten, we may call sk_psock_stop and cancel psock->work. As suggested by Paolo Abeni, reorder the condition so the control flow is less convoluted. After that change, the reproducer does not trigger the WARN_ON_ONCE anymore. |
| CVE-2024-39499 | In the Linux kernel, the following vulnerability has been resolved: vmci: prevent speculation leaks by sanitizing event in event_deliver() Coverity spotted that event_msg is controlled by user-space, event_msg->event_data.event is passed to event_deliver() and used as an index without sanitization. This change ensures that the event index is sanitized to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Only compile tested, no access to HW. |
| CVE-2024-39498 | In the Linux kernel, the following vulnerability has been resolved: drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2 [Why] Commit: - commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement") accidently overwrite the commit - commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2") which cause regression. [How] Recover the original NULL fix and remove the unnecessary input parameter 'state' for drm_dp_add_payload_part2(). (cherry picked from commit 4545614c1d8da603e57b60dd66224d81b6ffc305) |
| CVE-2024-39497 | In the Linux kernel, the following vulnerability has been resolved: drm/shmem-helper: Fix BUG_ON() on mmap(PROT_WRITE, MAP_PRIVATE) Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot: BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags)); Return -EINVAL early if COW mapping is detected. This bug affects all drm drivers using default shmem helpers. It can be reproduced by this simple example: void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset); ptr[0] = 0; |
| CVE-2024-39496 | In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free due to race with dev replace While loading a zone's info during creation of a block group, we can race with a device replace operation and then trigger a use-after-free on the device that was just replaced (source device of the replace operation). This happens because at btrfs_load_zone_info() we extract a device from the chunk map into a local variable and then use the device while not under the protection of the device replace rwsem. So if there's a device replace operation happening when we extract the device and that device is the source of the replace operation, we will trigger a use-after-free if before we finish using the device the replace operation finishes and frees the device. Fix this by enlarging the critical section under the protection of the device replace rwsem so that all uses of the device are done inside the critical section. |
| CVE-2024-39495 | In the Linux kernel, the following vulnerability has been resolved: greybus: Fix use-after-free bug in gb_interface_release due to race condition. In gb_interface_create, &intf->mode_switch_completion is bound with gb_interface_mode_switch_work. Then it will be started by gb_interface_request_mode_switch. Here is the relevant code. if (!queue_work(system_long_wq, &intf->mode_switch_work)) { ... } If we call gb_interface_release to make cleanup, there may be an unfinished work. This function will call kfree to free the object "intf". However, if gb_interface_mode_switch_work is scheduled to run after kfree, it may cause use-after-free error as gb_interface_mode_switch_work will use the object "intf". The possible execution flow that may lead to the issue is as follows: CPU0 CPU1 | gb_interface_create | gb_interface_request_mode_switch gb_interface_release | kfree(intf) (free) | | gb_interface_mode_switch_work | mutex_lock(&intf->mutex) (use) Fix it by canceling the work before kfree. |
| CVE-2024-39494 | In the Linux kernel, the following vulnerability has been resolved: ima: Fix use-after-free on a dentry's dname.name ->d_name.name can change on rename and the earlier value can be freed; there are conditions sufficient to stabilize it (->d_lock on dentry, ->d_lock on its parent, ->i_rwsem exclusive on the parent's inode, rename_lock), but none of those are met at any of the sites. Take a stable snapshot of the name instead. |
| CVE-2024-39493 | In the Linux kernel, the following vulnerability has been resolved: crypto: qat - Fix ADF_DEV_RESET_SYNC memory leak Using completion_done to determine whether the caller has gone away only works after a complete call. Furthermore it's still possible that the caller has not yet called wait_for_completion, resulting in another potential UAF. Fix this by making the caller use cancel_work_sync and then freeing the memory safely. |
| CVE-2024-39492 | In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-cmdq: Fix pm_runtime_get_sync() warning in mbox shutdown The return value of pm_runtime_get_sync() in cmdq_mbox_shutdown() will return 1 when pm runtime state is active, and we don't want to get the warning message in this case. So we change the return value < 0 for WARN_ON(). |
| CVE-2024-39491 | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: cs35l56: Fix lifetime of cs_dsp instance The cs_dsp instance is initialized in the driver probe() so it should be freed in the driver remove(). Also fix a missing call to cs_dsp_remove() in the error path of cs35l56_hda_common_probe(). The call to cs_dsp_remove() was being done in the component unbind callback cs35l56_hda_unbind(). This meant that if the driver was unbound and then re-bound it would be using an uninitialized cs_dsp instance. It is best to initialize the cs_dsp instance in probe() so that it can return an error if it fails. The component binding API doesn't have any error handling so there's no way to handle a failure if cs_dsp was initialized in the bind. |
| CVE-2024-39490 | In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix missing sk_buff release in seg6_input_core The seg6_input() function is responsible for adding the SRH into a packet, delegating the operation to the seg6_input_core(). This function uses the skb_cow_head() to ensure that there is sufficient headroom in the sk_buff for accommodating the link-layer header. In the event that the skb_cow_header() function fails, the seg6_input_core() catches the error but it does not release the sk_buff, which will result in a memory leak. This issue was introduced in commit af3b5158b89d ("ipv6: sr: fix BUG due to headroom too small after SRH push") and persists even after commit 7a3f5b0de364 ("netfilter: add netfilter hooks to SRv6 data plane"), where the entire seg6_input() code was refactored to deal with netfilter hooks. The proposed patch addresses the identified memory leak by requiring the seg6_input_core() function to release the sk_buff in the event that skb_cow_head() fails. |
| CVE-2024-39489 | In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix memleak in seg6_hmac_init_algo seg6_hmac_init_algo returns without cleaning up the previous allocations if one fails, so it's going to leak all that memory and the crypto tfms. Update seg6_hmac_exit to only free the memory when allocated, so we can reuse the code directly. |
| CVE-2024-39488 | In the Linux kernel, the following vulnerability has been resolved: arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY When CONFIG_DEBUG_BUGVERBOSE=n, we fail to add necessary padding bytes to bug_table entries, and as a result the last entry in a bug table will be ignored, potentially leading to an unexpected panic(). All prior entries in the table will be handled correctly. The arm64 ABI requires that struct fields of up to 8 bytes are naturally-aligned, with padding added within a struct such that struct are suitably aligned within arrays. When CONFIG_DEBUG_BUGVERPOSE=y, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes signed int file_disp; // 4 bytes unsigned short line; // 2 bytes unsigned short flags; // 2 bytes } ... with 12 bytes total, requiring 4-byte alignment. When CONFIG_DEBUG_BUGVERBOSE=n, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes unsigned short flags; // 2 bytes < implicit padding > // 2 bytes } ... with 8 bytes total, with 6 bytes of data and 2 bytes of trailing padding, requiring 4-byte alginment. When we create a bug_entry in assembly, we align the start of the entry to 4 bytes, which implicitly handles padding for any prior entries. However, we do not align the end of the entry, and so when CONFIG_DEBUG_BUGVERBOSE=n, the final entry lacks the trailing padding bytes. For the main kernel image this is not a problem as find_bug() doesn't depend on the trailing padding bytes when searching for entries: for (bug = __start___bug_table; bug < __stop___bug_table; ++bug) if (bugaddr == bug_addr(bug)) return bug; However for modules, module_bug_finalize() depends on the trailing bytes when calculating the number of entries: mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); ... and as the last bug_entry lacks the necessary padding bytes, this entry will not be counted, e.g. in the case of a single entry: sechdrs[i].sh_size == 6 sizeof(struct bug_entry) == 8; sechdrs[i].sh_size / sizeof(struct bug_entry) == 0; Consequently module_find_bug() will miss the last bug_entry when it does: for (i = 0; i < mod->num_bugs; ++i, ++bug) if (bugaddr == bug_addr(bug)) goto out; ... which can lead to a kenrel panic due to an unhandled bug. This can be demonstrated with the following module: static int __init buginit(void) { WARN(1, "hello\n"); return 0; } static void __exit bugexit(void) { } module_init(buginit); module_exit(bugexit); MODULE_LICENSE("GPL"); ... which will trigger a kernel panic when loaded: ------------[ cut here ]------------ hello Unexpected kernel BRK exception at EL1 Internal error: BRK handler: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: hello(O+) CPU: 0 PID: 50 Comm: insmod Tainted: G O 6.9.1 #8 Hardware name: linux,dummy-virt (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : buginit+0x18/0x1000 [hello] lr : buginit+0x18/0x1000 [hello] sp : ffff800080533ae0 x29: ffff800080533ae0 x28: 0000000000000000 x27: 0000000000000000 x26: ffffaba8c4e70510 x25: ffff800080533c30 x24: ffffaba8c4a28a58 x23: 0000000000000000 x22: 0000000000000000 x21: ffff3947c0eab3c0 x20: ffffaba8c4e3f000 x19: ffffaba846464000 x18: 0000000000000006 x17: 0000000000000000 x16: ffffaba8c2492834 x15: 0720072007200720 x14: 0720072007200720 x13: ffffaba8c49b27c8 x12: 0000000000000312 x11: 0000000000000106 x10: ffffaba8c4a0a7c8 x9 : ffffaba8c49b27c8 x8 : 00000000ffffefff x7 : ffffaba8c4a0a7c8 x6 : 80000000fffff000 x5 : 0000000000000107 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff3947c0eab3c0 Call trace: buginit+0x18/0x1000 [hello] do_one_initcall+0x80/0x1c8 do_init_module+0x60/0x218 load_module+0x1ba4/0x1d70 __do_sys_init_module+0x198/0x1d0 __arm64_sys_init_module+0x1c/0x28 invoke_syscall+0x48/0x114 el0_svc ---truncated--- |
| CVE-2024-39487 | In the Linux kernel, the following vulnerability has been resolved: bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set() In function bond_option_arp_ip_targets_set(), if newval->string is an empty string, newval->string+1 will point to the byte after the string, causing an out-of-bound read. BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418 Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107 CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc1/0x5e0 mm/kasan/report.c:475 kasan_report+0xbe/0xf0 mm/kasan/report.c:588 strlen+0x7d/0xa0 lib/string.c:418 __fortify_strlen include/linux/fortify-string.h:210 [inline] in4_pton+0xa3/0x3f0 net/core/utils.c:130 bond_option_arp_ip_targets_set+0xc2/0x910 drivers/net/bonding/bond_options.c:1201 __bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767 __bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792 bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817 bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156 dev_attr_store+0x54/0x80 drivers/base/core.c:2366 sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334 call_write_iter include/linux/fs.h:2020 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x96a/0xd80 fs/read_write.c:584 ksys_write+0x122/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b ---[ end trace ]--- Fix it by adding a check of string length before using it. |
| CVE-2024-39486 | In the Linux kernel, the following vulnerability has been resolved: drm/drm_file: Fix pid refcounting race <[email protected]>, Maxime Ripard <[email protected]>, Thomas Zimmermann <[email protected]> filp->pid is supposed to be a refcounted pointer; however, before this patch, drm_file_update_pid() only increments the refcount of a struct pid after storing a pointer to it in filp->pid and dropping the dev->filelist_mutex, making the following race possible: process A process B ========= ========= begin drm_file_update_pid mutex_lock(&dev->filelist_mutex) rcu_replace_pointer(filp->pid, <pid B>, 1) mutex_unlock(&dev->filelist_mutex) begin drm_file_update_pid mutex_lock(&dev->filelist_mutex) rcu_replace_pointer(filp->pid, <pid A>, 1) mutex_unlock(&dev->filelist_mutex) get_pid(<pid A>) synchronize_rcu() put_pid(<pid B>) *** pid B reaches refcount 0 and is freed here *** get_pid(<pid B>) *** UAF *** synchronize_rcu() put_pid(<pid A>) As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y because it requires RCU to detect a quiescent state in code that is not explicitly calling into the scheduler. This race leads to use-after-free of a "struct pid". It is probably somewhat hard to hit because process A has to pass through a synchronize_rcu() operation while process B is between mutex_unlock() and get_pid(). Fix it by ensuring that by the time a pointer to the current task's pid is stored in the file, an extra reference to the pid has been taken. This fix also removes the condition for synchronize_rcu(); I think that optimization is unnecessary complexity, since in that case we would usually have bailed out on the lockless check above. |
| CVE-2024-39485 | In the Linux kernel, the following vulnerability has been resolved: media: v4l: async: Properly re-initialise notifier entry in unregister The notifier_entry of a notifier is not re-initialised after unregistering the notifier. This leads to dangling pointers being left there so use list_del_init() to return the notifier_entry an empty list. |
| CVE-2024-39484 | In the Linux kernel, the following vulnerability has been resolved: mmc: davinci: Don't strip remove function when driver is builtin Using __exit for the remove function results in the remove callback being discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g. using sysfs or hotplug), the driver is just removed without the cleanup being performed. This results in resource leaks. Fix it by compiling in the remove callback unconditionally. This also fixes a W=1 modpost warning: WARNING: modpost: drivers/mmc/host/davinci_mmc: section mismatch in reference: davinci_mmcsd_driver+0x10 (section: .data) -> davinci_mmcsd_remove (section: .exit.text) |
| CVE-2024-39483 | In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: WARN on vNMI + NMI window iff NMIs are outright masked When requesting an NMI window, WARN on vNMI support being enabled if and only if NMIs are actually masked, i.e. if the vCPU is already handling an NMI. KVM's ABI for NMIs that arrive simultanesouly (from KVM's point of view) is to inject one NMI and pend the other. When using vNMI, KVM pends the second NMI simply by setting V_NMI_PENDING, and lets the CPU do the rest (hardware automatically sets V_NMI_BLOCKING when an NMI is injected). However, if KVM can't immediately inject an NMI, e.g. because the vCPU is in an STI shadow or is running with GIF=0, then KVM will request an NMI window and trigger the WARN (but still function correctly). Whether or not the GIF=0 case makes sense is debatable, as the intent of KVM's behavior is to provide functionality that is as close to real hardware as possible. E.g. if two NMIs are sent in quick succession, the probability of both NMIs arriving in an STI shadow is infinitesimally low on real hardware, but significantly larger in a virtual environment, e.g. if the vCPU is preempted in the STI shadow. For GIF=0, the argument isn't as clear cut, because the window where two NMIs can collide is much larger in bare metal (though still small). That said, KVM should not have divergent behavior for the GIF=0 case based on whether or not vNMI support is enabled. And KVM has allowed simultaneous NMIs with GIF=0 for over a decade, since commit 7460fb4a3400 ("KVM: Fix simultaneous NMIs"). I.e. KVM's GIF=0 handling shouldn't be modified without a *really* good reason to do so, and if KVM's behavior were to be modified, it should be done irrespective of vNMI support. |
| CVE-2024-39482 | In the Linux kernel, the following vulnerability has been resolved: bcache: fix variable length array abuse in btree_iter btree_iter is used in two ways: either allocated on the stack with a fixed size MAX_BSETS, or from a mempool with a dynamic size based on the specific cache set. Previously, the struct had a fixed-length array of size MAX_BSETS which was indexed out-of-bounds for the dynamically-sized iterators, which causes UBSAN to complain. This patch uses the same approach as in bcachefs's sort_iter and splits the iterator into a btree_iter with a flexible array member and a btree_iter_stack which embeds a btree_iter as well as a fixed-length data array. |
| CVE-2024-39481 | In the Linux kernel, the following vulnerability has been resolved: media: mc: Fix graph walk in media_pipeline_start The graph walk tries to follow all links, even if they are not between pads. This causes a crash with, e.g. a MEDIA_LNK_FL_ANCILLARY_LINK link. Fix this by allowing the walk to proceed only for MEDIA_LNK_FL_DATA_LINK links. |
| CVE-2024-39480 | In the Linux kernel, the following vulnerability has been resolved: kdb: Fix buffer overflow during tab-complete Currently, when the user attempts symbol completion with the Tab key, kdb will use strncpy() to insert the completed symbol into the command buffer. Unfortunately it passes the size of the source buffer rather than the destination to strncpy() with predictably horrible results. Most obviously if the command buffer is already full but cp, the cursor position, is in the middle of the buffer, then we will write past the end of the supplied buffer. Fix this by replacing the dubious strncpy() calls with memmove()/memcpy() calls plus explicit boundary checks to make sure we have enough space before we start moving characters around. |
| CVE-2024-39479 | In the Linux kernel, the following vulnerability has been resolved: drm/i915/hwmon: Get rid of devm When both hwmon and hwmon drvdata (on which hwmon depends) are device managed resources, the expectation, on device unbind, is that hwmon will be released before drvdata. However, in i915 there are two separate code paths, which both release either drvdata or hwmon and either can be released before the other. These code paths (for device unbind) are as follows (see also the bug referenced below): Call Trace: release_nodes+0x11/0x70 devres_release_group+0xb2/0x110 component_unbind_all+0x8d/0xa0 component_del+0xa5/0x140 intel_pxp_tee_component_fini+0x29/0x40 [i915] intel_pxp_fini+0x33/0x80 [i915] i915_driver_remove+0x4c/0x120 [i915] i915_pci_remove+0x19/0x30 [i915] pci_device_remove+0x32/0xa0 device_release_driver_internal+0x19c/0x200 unbind_store+0x9c/0xb0 and Call Trace: release_nodes+0x11/0x70 devres_release_all+0x8a/0xc0 device_unbind_cleanup+0x9/0x70 device_release_driver_internal+0x1c1/0x200 unbind_store+0x9c/0xb0 This means that in i915, if use devm, we cannot gurantee that hwmon will always be released before drvdata. Which means that we have a uaf if hwmon sysfs is accessed when drvdata has been released but hwmon hasn't. The only way out of this seems to be do get rid of devm_ and release/free everything explicitly during device unbind. v2: Change commit message and other minor code changes v3: Cleanup from i915_hwmon_register on error (Armin Wolf) v4: Eliminate potential static analyzer warning (Rodrigo) Eliminate fetch_and_zero (Jani) v5: Restore previous logic for ddat_gt->hwmon_dev error return (Andi) |
| CVE-2024-39478 | In the Linux kernel, the following vulnerability has been resolved: crypto: starfive - Do not free stack buffer RSA text data uses variable length buffer allocated in software stack. Calling kfree on it causes undefined behaviour in subsequent operations. |
| CVE-2024-39477 | In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: do not call vma_add_reservation upon ENOMEM sysbot reported a splat [1] on __unmap_hugepage_range(). This is because vma_needs_reservation() can return -ENOMEM if allocate_file_region_entries() fails to allocate the file_region struct for the reservation. Check for that and do not call vma_add_reservation() if that is the case, otherwise region_abort() and region_del() will see that we do not have any file_regions. If we detect that vma_needs_reservation() returned -ENOMEM, we clear the hugetlb_restore_reserve flag as if this reservation was still consumed, so free_huge_folio() will not increment the resv count. [1] https://lore.kernel.org/linux-mm/[email protected]/T/#ma5983bc1ab18a54910da83416b3f89f3c7ee43aa |
| CVE-2024-39476 | In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING Xiao reported that lvm2 test lvconvert-raid-takeover.sh can hang with small possibility, the root cause is exactly the same as commit bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"") However, Dan reported another hang after that, and junxiao investigated the problem and found out that this is caused by plugged bio can't issue from raid5d(). Current implementation in raid5d() has a weird dependence: 1) md_check_recovery() from raid5d() must hold 'reconfig_mutex' to clear MD_SB_CHANGE_PENDING; 2) raid5d() handles IO in a deadloop, until all IO are issued; 3) IO from raid5d() must wait for MD_SB_CHANGE_PENDING to be cleared; This behaviour is introduce before v2.6, and for consequence, if other context hold 'reconfig_mutex', and md_check_recovery() can't update super_block, then raid5d() will waste one cpu 100% by the deadloop, until 'reconfig_mutex' is released. Refer to the implementation from raid1 and raid10, fix this problem by skipping issue IO if MD_SB_CHANGE_PENDING is still set after md_check_recovery(), daemon thread will be woken up when 'reconfig_mutex' is released. Meanwhile, the hang problem will be fixed as well. |
| CVE-2024-39475 | In the Linux kernel, the following vulnerability has been resolved: fbdev: savage: Handle err return when savagefb_check_var failed The commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock equals zero") checks the value of pixclock to avoid divide-by-zero error. However the function savagefb_probe doesn't handle the error return of savagefb_check_var. When pixclock is 0, it will cause divide-by-zero error. |
| CVE-2024-39474 | In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL commit a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc") includes support for __GFP_NOFAIL, but it presents a conflict with commit dd544141b9eb ("vmalloc: back off when the current task is OOM-killed"). A possible scenario is as follows: process-a __vmalloc_node_range(GFP_KERNEL | __GFP_NOFAIL) __vmalloc_area_node() vm_area_alloc_pages() --> oom-killer send SIGKILL to process-a if (fatal_signal_pending(current)) break; --> return NULL; To fix this, do not check fatal_signal_pending() in vm_area_alloc_pages() if __GFP_NOFAIL set. This issue occurred during OPLUS KASAN TEST. Below is part of the log -> oom-killer sends signal to process [65731.222840] [ T1308] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/apps/uid_10198,task=gs.intelligence,pid=32454,uid=10198 [65731.259685] [T32454] Call trace: [65731.259698] [T32454] dump_backtrace+0xf4/0x118 [65731.259734] [T32454] show_stack+0x18/0x24 [65731.259756] [T32454] dump_stack_lvl+0x60/0x7c [65731.259781] [T32454] dump_stack+0x18/0x38 [65731.259800] [T32454] mrdump_common_die+0x250/0x39c [mrdump] [65731.259936] [T32454] ipanic_die+0x20/0x34 [mrdump] [65731.260019] [T32454] atomic_notifier_call_chain+0xb4/0xfc [65731.260047] [T32454] notify_die+0x114/0x198 [65731.260073] [T32454] die+0xf4/0x5b4 [65731.260098] [T32454] die_kernel_fault+0x80/0x98 [65731.260124] [T32454] __do_kernel_fault+0x160/0x2a8 [65731.260146] [T32454] do_bad_area+0x68/0x148 [65731.260174] [T32454] do_mem_abort+0x151c/0x1b34 [65731.260204] [T32454] el1_abort+0x3c/0x5c [65731.260227] [T32454] el1h_64_sync_handler+0x54/0x90 [65731.260248] [T32454] el1h_64_sync+0x68/0x6c [65731.260269] [T32454] z_erofs_decompress_queue+0x7f0/0x2258 --> be->decompressed_pages = kvcalloc(be->nr_pages, sizeof(struct page *), GFP_KERNEL | __GFP_NOFAIL); kernel panic by NULL pointer dereference. erofs assume kvmalloc with __GFP_NOFAIL never return NULL. [65731.260293] [T32454] z_erofs_runqueue+0xf30/0x104c [65731.260314] [T32454] z_erofs_readahead+0x4f0/0x968 [65731.260339] [T32454] read_pages+0x170/0xadc [65731.260364] [T32454] page_cache_ra_unbounded+0x874/0xf30 [65731.260388] [T32454] page_cache_ra_order+0x24c/0x714 [65731.260411] [T32454] filemap_fault+0xbf0/0x1a74 [65731.260437] [T32454] __do_fault+0xd0/0x33c [65731.260462] [T32454] handle_mm_fault+0xf74/0x3fe0 [65731.260486] [T32454] do_mem_abort+0x54c/0x1b34 [65731.260509] [T32454] el0_da+0x44/0x94 [65731.260531] [T32454] el0t_64_sync_handler+0x98/0xb4 [65731.260553] [T32454] el0t_64_sync+0x198/0x19c |
| CVE-2024-39473 | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension If a process module does not have base config extension then the same format applies to all of it's inputs and the process->base_config_ext is NULL, causing NULL dereference when specifically crafted topology and sequences used. |
| CVE-2024-39472 | In the Linux kernel, the following vulnerability has been resolved: xfs: fix log recovery buffer allocation for the legacy h_size fixup Commit a70f9fe52daa ("xfs: detect and handle invalid iclog size set by mkfs") added a fixup for incorrect h_size values used for the initial umount record in old xfsprogs versions. Later commit 0c771b99d6c9 ("xfs: clean up calculation of LR header blocks") cleaned up the log reover buffer calculation, but stoped using the fixed up h_size value to size the log recovery buffer, which can lead to an out of bounds access when the incorrect h_size does not come from the old mkfs tool, but a fuzzer. Fix this by open coding xlog_logrec_hblks and taking the fixed h_size into account for this calculation. |
| CVE-2024-39471 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add error handle to avoid out-of-bounds if the sdma_v4_0_irq_id_to_seq return -EINVAL, the process should be stop to avoid out-of-bounds read, so directly return -EINVAL. |
| CVE-2024-39470 | In the Linux kernel, the following vulnerability has been resolved: eventfs: Fix a possible null pointer dereference in eventfs_find_events() In function eventfs_find_events,there is a potential null pointer that may be caused by calling update_events_attr which will perform some operations on the members of the ei struct when ei is NULL. Hence,When ei->is_freed is set,return NULL directly. |
| CVE-2024-39469 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors The error handling in nilfs_empty_dir() when a directory folio/page read fails is incorrect, as in the old ext2 implementation, and if the folio/page cannot be read or nilfs_check_folio() fails, it will falsely determine the directory as empty and corrupt the file system. In addition, since nilfs_empty_dir() does not immediately return on a failed folio/page read, but continues to loop, this can cause a long loop with I/O if i_size of the directory's inode is also corrupted, causing the log writer thread to wait and hang, as reported by syzbot. Fix these issues by making nilfs_empty_dir() immediately return a false value (0) if it fails to get a directory folio/page. |
| CVE-2024-39468 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix deadlock in smb2_find_smb_tcon() Unlock cifs_tcp_ses_lock before calling cifs_put_smb_ses() to avoid such deadlock. |
| CVE-2024-39467 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode() syzbot reports a kernel bug as below: F2FS-fs (loop0): Mounted with checkpoint version = 48b305e4 ================================================================== BUG: KASAN: slab-out-of-bounds in f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline] BUG: KASAN: slab-out-of-bounds in current_nat_addr fs/f2fs/node.h:213 [inline] BUG: KASAN: slab-out-of-bounds in f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600 Read of size 1 at addr ffff88807a58c76c by task syz-executor280/5076 CPU: 1 PID: 5076 Comm: syz-executor280 Not tainted 6.9.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline] current_nat_addr fs/f2fs/node.h:213 [inline] f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600 f2fs_xattr_fiemap fs/f2fs/data.c:1848 [inline] f2fs_fiemap+0x55d/0x1ee0 fs/f2fs/data.c:1925 ioctl_fiemap fs/ioctl.c:220 [inline] do_vfs_ioctl+0x1c07/0x2e50 fs/ioctl.c:838 __do_sys_ioctl fs/ioctl.c:902 [inline] __se_sys_ioctl+0x81/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is we missed to do sanity check on i_xattr_nid during f2fs_iget(), so that in fiemap() path, current_nat_addr() will access nat_bitmap w/ offset from invalid i_xattr_nid, result in triggering kasan bug report, fix it. |
| CVE-2024-39466 | In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/qcom/lmh: Check for SCM availability at probe Up until now, the necessary scm availability check has not been performed, leading to possible null pointer dereferences (which did happen for me on RB1). Fix that. |
| CVE-2024-39465 | In the Linux kernel, the following vulnerability has been resolved: media: mgb4: Fix double debugfs remove Fixes an error where debugfs_remove_recursive() is called first on a parent directory and then again on a child which causes a kernel panic. [hverkuil: added Fixes/Cc tags] |
| CVE-2024-39464 | In the Linux kernel, the following vulnerability has been resolved: media: v4l: async: Fix notifier list entry init struct v4l2_async_notifier has several list_head members, but only waiting_list and done_list are initialized. notifier_entry was kept 'zeroed' leading to an uninitialized list_head. This results in a NULL-pointer dereference if csi2_async_register() fails, e.g. node for remote endpoint is disabled, and returns -ENOTCONN. The following calls to v4l2_async_nf_unregister() results in a NULL pointer dereference. Add the missing list head initializer. |
| CVE-2024-39463 | In the Linux kernel, the following vulnerability has been resolved: 9p: add missing locking around taking dentry fid list Fix a use-after-free on dentry's d_fsdata fid list when a thread looks up a fid through dentry while another thread unlinks it: UAF thread: refcount_t: addition on 0; use-after-free. p9_fid_get linux/./include/net/9p/client.h:262 v9fs_fid_find+0x236/0x280 linux/fs/9p/fid.c:129 v9fs_fid_lookup_with_uid linux/fs/9p/fid.c:181 v9fs_fid_lookup+0xbf/0xc20 linux/fs/9p/fid.c:314 v9fs_vfs_getattr_dotl+0xf9/0x360 linux/fs/9p/vfs_inode_dotl.c:400 vfs_statx+0xdd/0x4d0 linux/fs/stat.c:248 Freed by: p9_fid_destroy (inlined) p9_client_clunk+0xb0/0xe0 linux/net/9p/client.c:1456 p9_fid_put linux/./include/net/9p/client.h:278 v9fs_dentry_release+0xb5/0x140 linux/fs/9p/vfs_dentry.c:55 v9fs_remove+0x38f/0x620 linux/fs/9p/vfs_inode.c:518 vfs_unlink+0x29a/0x810 linux/fs/namei.c:4335 The problem is that d_fsdata was not accessed under d_lock, because d_release() normally is only called once the dentry is otherwise no longer accessible but since we also call it explicitly in v9fs_remove that lock is required: move the hlist out of the dentry under lock then unref its fids once they are no longer accessible. |
| CVE-2024-39462 | In the Linux kernel, the following vulnerability has been resolved: clk: bcm: dvp: Assign ->num before accessing ->hws Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in clk_dvp_probe() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-bcm2711-dvp.c:59:2 index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning. |
| CVE-2024-39461 | In the Linux kernel, the following vulnerability has been resolved: clk: bcm: rpi: Assign ->num before accessing ->hws Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in raspberrypi_discover_clocks() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4 index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning. |
| CVE-2024-39371 | In the Linux kernel, the following vulnerability has been resolved: io_uring: check for non-NULL file pointer in io_file_can_poll() In earlier kernels, it was possible to trigger a NULL pointer dereference off the forced async preparation path, if no file had been assigned. The trace leading to that looks as follows: BUG: kernel NULL pointer dereference, address: 00000000000000b0 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 67 PID: 1633 Comm: buf-ring-invali Not tainted 6.8.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 2/2/2022 RIP: 0010:io_buffer_select+0xc3/0x210 Code: 00 00 48 39 d1 0f 82 ae 00 00 00 48 81 4b 48 00 00 01 00 48 89 73 70 0f b7 50 0c 66 89 53 42 85 ed 0f 85 d2 00 00 00 48 8b 13 <48> 8b 92 b0 00 00 00 48 83 7a 40 00 0f 84 21 01 00 00 4c 8b 20 5b RSP: 0018:ffffb7bec38c7d88 EFLAGS: 00010246 RAX: ffff97af2be61000 RBX: ffff97af234f1700 RCX: 0000000000000040 RDX: 0000000000000000 RSI: ffff97aecfb04820 RDI: ffff97af234f1700 RBP: 0000000000000000 R08: 0000000000200030 R09: 0000000000000020 R10: ffffb7bec38c7dc8 R11: 000000000000c000 R12: ffffb7bec38c7db8 R13: ffff97aecfb05800 R14: ffff97aecfb05800 R15: ffff97af2be5e000 FS: 00007f852f74b740(0000) GS:ffff97b1eeec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000b0 CR3: 000000016deab005 CR4: 0000000000370ef0 Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x14d/0x420 ? do_user_addr_fault+0x61/0x6a0 ? exc_page_fault+0x6c/0x150 ? asm_exc_page_fault+0x22/0x30 ? io_buffer_select+0xc3/0x210 __io_import_iovec+0xb5/0x120 io_readv_prep_async+0x36/0x70 io_queue_sqe_fallback+0x20/0x260 io_submit_sqes+0x314/0x630 __do_sys_io_uring_enter+0x339/0xbc0 ? __do_sys_io_uring_register+0x11b/0xc50 ? vm_mmap_pgoff+0xce/0x160 do_syscall_64+0x5f/0x180 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0x55e0a110a67e Code: ba cc 00 00 00 45 31 c0 44 0f b6 92 d0 00 00 00 31 d2 41 b9 08 00 00 00 41 83 e2 01 41 c1 e2 04 41 09 c2 b8 aa 01 00 00 0f 05 <c3> 90 89 30 eb a9 0f 1f 40 00 48 8b 42 20 8b 00 a8 06 75 af 85 f6 because the request is marked forced ASYNC and has a bad file fd, and hence takes the forced async prep path. Current kernels with the request async prep cleaned up can no longer hit this issue, but for ease of backporting, let's add this safety check in here too as it really doesn't hurt. For both cases, this will inevitably end with a CQE posted with -EBADF. |
| CVE-2024-39301 | In the Linux kernel, the following vulnerability has been resolved: net/9p: fix uninit-value in p9_client_rpc() Syzbot with the help of KMSAN reported the following error: BUG: KMSAN: uninit-value in trace_9p_client_res include/trace/events/9p.h:146 [inline] BUG: KMSAN: uninit-value in p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 trace_9p_client_res include/trace/events/9p.h:146 [inline] p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: __alloc_pages+0x9d6/0xe70 mm/page_alloc.c:4598 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] alloc_slab_page mm/slub.c:2175 [inline] allocate_slab mm/slub.c:2338 [inline] new_slab+0x2de/0x1400 mm/slub.c:2391 ___slab_alloc+0x1184/0x33d0 mm/slub.c:3525 __slab_alloc mm/slub.c:3610 [inline] __slab_alloc_node mm/slub.c:3663 [inline] slab_alloc_node mm/slub.c:3835 [inline] kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852 p9_tag_alloc net/9p/client.c:278 [inline] p9_client_prepare_req+0x20a/0x1770 net/9p/client.c:641 p9_client_rpc+0x27e/0x1340 net/9p/client.c:688 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 If p9_check_errors() fails early in p9_client_rpc(), req->rc.tag will not be properly initialized. However, trace_9p_client_res() ends up trying to print it out anyway before p9_client_rpc() finishes. Fix this issue by assigning default values to p9_fcall fields such as 'tag' and (just in case KMSAN unearths something new) 'id' during the tag allocation stage. |
| CVE-2024-39298 | In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix handling of dissolved but not taken off from buddy pages When I did memory failure tests recently, below panic occurs: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00 flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff) raw: 06fffe0000000000 dead000000000100 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000009 00000000ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(!PageBuddy(page)) ------------[ cut here ]------------ kernel BUG at include/linux/page-flags.h:1009! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:__del_page_from_free_list+0x151/0x180 RSP: 0018:ffffa49c90437998 EFLAGS: 00000046 RAX: 0000000000000035 RBX: 0000000000000009 RCX: ffff8dd8dfd1c9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff8dd8dfd1c9c0 RBP: ffffd901233b8000 R08: ffffffffab5511f8 R09: 0000000000008c69 R10: 0000000000003c15 R11: ffffffffab5511f8 R12: ffff8dd8fffc0c80 R13: 0000000000000001 R14: ffff8dd8fffc0c80 R15: 0000000000000009 FS: 00007ff916304740(0000) GS:ffff8dd8dfd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055eae50124c8 CR3: 00000008479e0000 CR4: 00000000000006f0 Call Trace: <TASK> __rmqueue_pcplist+0x23b/0x520 get_page_from_freelist+0x26b/0xe40 __alloc_pages_noprof+0x113/0x1120 __folio_alloc_noprof+0x11/0xb0 alloc_buddy_hugetlb_folio.isra.0+0x5a/0x130 __alloc_fresh_hugetlb_folio+0xe7/0x140 alloc_pool_huge_folio+0x68/0x100 set_max_huge_pages+0x13d/0x340 hugetlb_sysctl_handler_common+0xe8/0x110 proc_sys_call_handler+0x194/0x280 vfs_write+0x387/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xc2/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff916114887 RSP: 002b:00007ffec8a2fd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000055eae500e350 RCX: 00007ff916114887 RDX: 0000000000000004 RSI: 000055eae500e390 RDI: 0000000000000003 RBP: 000055eae50104c0 R08: 0000000000000000 R09: 000055eae50104c0 R10: 0000000000000077 R11: 0000000000000246 R12: 0000000000000004 R13: 0000000000000004 R14: 00007ff916216b80 R15: 00007ff916216a00 </TASK> Modules linked in: mce_inject hwpoison_inject ---[ end trace 0000000000000000 ]--- And before the panic, there had an warning about bad page state: BUG: Bad page state in process page-types pfn:8cee00 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00 flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff) page_type: 0xffffff7f(buddy) raw: 06fffe0000000000 ffffd901241c0008 ffffd901240f8008 0000000000000000 raw: 0000000000000000 0000000000000009 00000000ffffff7f 0000000000000000 page dumped because: nonzero mapcount Modules linked in: mce_inject hwpoison_inject CPU: 8 PID: 154211 Comm: page-types Not tainted 6.9.0-rc4-00499-g5544ec3178e2-dirty #22 Call Trace: <TASK> dump_stack_lvl+0x83/0xa0 bad_page+0x63/0xf0 free_unref_page+0x36e/0x5c0 unpoison_memory+0x50b/0x630 simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110 debugfs_attr_write+0x42/0x60 full_proxy_write+0x5b/0x80 vfs_write+0xcd/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xc2/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f189a514887 RSP: 002b:00007ffdcd899718 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f189a514887 RDX: 0000000000000009 RSI: 00007ffdcd899730 RDI: 0000000000000003 RBP: 00007ffdcd8997a0 R08: 0000000000000000 R09: 00007ffdcd8994b2 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcda199a8 R13: 0000000000404af1 R14: 000000000040ad78 R15: 00007f189a7a5040 </TASK> The root cause should be the below race: memory_failure try_memory_failure_hugetlb me_huge_page __page_handle_poison dissolve_free_hugetlb_folio drain_all_pages -- Buddy page can be isolated e.g. for compaction. take_page_off_buddy -- Failed as page is not in the ---truncated--- |
| CVE-2024-39296 | In the Linux kernel, the following vulnerability has been resolved: bonding: fix oops during rmmod "rmmod bonding" causes an oops ever since commit cc317ea3d927 ("bonding: remove redundant NULL check in debugfs function"). Here are the relevant functions being called: bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root); bonding_debug_root = NULL; <--------- SET TO NULL HERE bond_netlink_fini() rtnl_link_unregister() __rtnl_link_unregister() unregister_netdevice_many_notify() bond_uninit() bond_debug_unregister() (commit removed check for bonding_debug_root == NULL) debugfs_remove() simple_recursive_removal() down_write() -> OOPS However, reverting the bad commit does not solve the problem completely because the original code contains a race that could cause the same oops, although it was much less likely to be triggered unintentionally: CPU1 rmmod bonding bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root); CPU2 echo -bond0 > /sys/class/net/bonding_masters bond_uninit() bond_debug_unregister() if (!bonding_debug_root) CPU1 bonding_debug_root = NULL; So do NOT revert the bad commit (since the removed checks were racy anyway), and instead change the order of actions taken during module removal. The same oops can also happen if there is an error during module init, so apply the same fix there. |
| CVE-2024-39293 | In the Linux kernel, the following vulnerability has been resolved: Revert "xsk: Support redirect to any socket bound to the same umem" This reverts commit 2863d665ea41282379f108e4da6c8a2366ba66db. This patch introduced a potential kernel crash when multiple napi instances redirect to the same AF_XDP socket. By removing the queue_index check, it is possible for multiple napi instances to access the Rx ring at the same time, which will result in a corrupted ring state which can lead to a crash when flushing the rings in __xsk_flush(). This can happen when the linked list of sockets to flush gets corrupted by concurrent accesses. A quick and small fix is not possible, so let us revert this for now. |
| CVE-2024-39292 | In the Linux kernel, the following vulnerability has been resolved: um: Add winch to winch_handlers before registering winch IRQ Registering a winch IRQ is racy, an interrupt may occur before the winch is added to the winch_handlers list. If that happens, register_winch_irq() adds to that list a winch that is scheduled to be (or has already been) freed, causing a panic later in winch_cleanup(). Avoid the race by adding the winch to the winch_handlers list before registering the IRQ, and rolling back if um_request_irq() fails. |
| CVE-2024-39291 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix buffer size in gfx_v9_4_3_init_ cp_compute_microcode() and rlc_microcode() The function gfx_v9_4_3_init_microcode in gfx_v9_4_3.c was generating about potential truncation of output when using the snprintf function. The issue was due to the size of the buffer 'ucode_prefix' being too small to accommodate the maximum possible length of the string being written into it. The string being written is "amdgpu/%s_mec.bin" or "amdgpu/%s_rlc.bin", where %s is replaced by the value of 'chip_name'. The length of this string without the %s is 16 characters. The warning message indicated that 'chip_name' could be up to 29 characters long, resulting in a total of 45 characters, which exceeds the buffer size of 30 characters. To resolve this issue, the size of the 'ucode_prefix' buffer has been reduced from 30 to 15. This ensures that the maximum possible length of the string being written into the buffer will not exceed its size, thus preventing potential buffer overflow and truncation issues. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c: In function ‘gfx_v9_4_3_early_init’: drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name); | ^~ ...... 439 | r = gfx_v9_4_3_init_rlc_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30 379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name); | ^~ ...... 443 | r = gfx_v9_4_3_init_cp_compute_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30 413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| CVE-2024-39277 | In the Linux kernel, the following vulnerability has been resolved: dma-mapping: benchmark: handle NUMA_NO_NODE correctly cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark() resulting in the following sanitizer report: UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask [64][1]' CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) ubsan_epilogue (lib/ubsan.c:232) __ubsan_handle_out_of_bounds (lib/ubsan.c:429) cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline] do_map_benchmark (kernel/dma/map_benchmark.c:104) map_benchmark_ioctl (kernel/dma/map_benchmark.c:246) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Use cpumask_of_node() in place when binding a kernel thread to a cpuset of a particular node. Note that the provided node id is checked inside map_benchmark_ioctl(). It's just a NUMA_NO_NODE case which is not handled properly later. Found by Linux Verification Center (linuxtesting.org). |
| CVE-2024-39276 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix mb_cache_entry's e_refcnt leak in ext4_xattr_block_cache_find() Syzbot reports a warning as follows: ============================================ WARNING: CPU: 0 PID: 5075 at fs/mbcache.c:419 mb_cache_destroy+0x224/0x290 Modules linked in: CPU: 0 PID: 5075 Comm: syz-executor199 Not tainted 6.9.0-rc6-gb947cc5bf6d7 RIP: 0010:mb_cache_destroy+0x224/0x290 fs/mbcache.c:419 Call Trace: <TASK> ext4_put_super+0x6d4/0xcd0 fs/ext4/super.c:1375 generic_shutdown_super+0x136/0x2d0 fs/super.c:641 kill_block_super+0x44/0x90 fs/super.c:1675 ext4_kill_sb+0x68/0xa0 fs/ext4/super.c:7327 [...] ============================================ This is because when finding an entry in ext4_xattr_block_cache_find(), if ext4_sb_bread() returns -ENOMEM, the ce's e_refcnt, which has already grown in the __entry_find(), won't be put away, and eventually trigger the above issue in mb_cache_destroy() due to reference count leakage. So call mb_cache_entry_put() on the -ENOMEM error branch as a quick fix. |
| CVE-2024-38780 | In the Linux kernel, the following vulnerability has been resolved: dma-buf/sw-sync: don't enable IRQ from sync_print_obj() Since commit a6aa8fca4d79 ("dma-buf/sw-sync: Reduce irqsave/irqrestore from known context") by error replaced spin_unlock_irqrestore() with spin_unlock_irq() for both sync_debugfs_show() and sync_print_obj() despite sync_print_obj() is called from sync_debugfs_show(), lockdep complains inconsistent lock state warning. Use plain spin_{lock,unlock}() for sync_print_obj(), for sync_debugfs_show() is already using spin_{lock,unlock}_irq(). |
| CVE-2024-38667 | In the Linux kernel, the following vulnerability has been resolved: riscv: prevent pt_regs corruption for secondary idle threads Top of the kernel thread stack should be reserved for pt_regs. However this is not the case for the idle threads of the secondary boot harts. Their stacks overlap with their pt_regs, so both may get corrupted. Similar issue has been fixed for the primary hart, see c7cdd96eca28 ("riscv: prevent stack corruption by reserving task_pt_regs(p) early"). However that fix was not propagated to the secondary harts. The problem has been noticed in some CPU hotplug tests with V enabled. The function smp_callin stored several registers on stack, corrupting top of pt_regs structure including status field. As a result, kernel attempted to save or restore inexistent V context. |
| CVE-2024-38664 | In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_dpsub: Always register bridge We must always register the DRM bridge, since zynqmp_dp_hpd_work_func calls drm_bridge_hpd_notify, which in turn expects hpd_mutex to be initialized. We do this before zynqmp_dpsub_drm_init since that calls drm_bridge_attach. This fixes the following lockdep warning: [ 19.217084] ------------[ cut here ]------------ [ 19.227530] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 19.227768] WARNING: CPU: 0 PID: 140 at kernel/locking/mutex.c:582 __mutex_lock+0x4bc/0x550 [ 19.241696] Modules linked in: [ 19.244937] CPU: 0 PID: 140 Comm: kworker/0:4 Not tainted 6.6.20+ #96 [ 19.252046] Hardware name: xlnx,zynqmp (DT) [ 19.256421] Workqueue: events zynqmp_dp_hpd_work_func [ 19.261795] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 19.269104] pc : __mutex_lock+0x4bc/0x550 [ 19.273364] lr : __mutex_lock+0x4bc/0x550 [ 19.277592] sp : ffffffc085c5bbe0 [ 19.281066] x29: ffffffc085c5bbe0 x28: 0000000000000000 x27: ffffff88009417f8 [ 19.288624] x26: ffffff8800941788 x25: ffffff8800020008 x24: ffffffc082aa3000 [ 19.296227] x23: ffffffc080d90e3c x22: 0000000000000002 x21: 0000000000000000 [ 19.303744] x20: 0000000000000000 x19: ffffff88002f5210 x18: 0000000000000000 [ 19.311295] x17: 6c707369642e3030 x16: 3030613464662072 x15: 0720072007200720 [ 19.318922] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 0000000000000001 [ 19.326442] x11: 0001ffc085c5b940 x10: 0001ff88003f388b x9 : 0001ff88003f3888 [ 19.334003] x8 : 0001ff88003f3888 x7 : 0000000000000000 x6 : 0000000000000000 [ 19.341537] x5 : 0000000000000000 x4 : 0000000000001668 x3 : 0000000000000000 [ 19.349054] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff88003f3880 [ 19.356581] Call trace: [ 19.359160] __mutex_lock+0x4bc/0x550 [ 19.363032] mutex_lock_nested+0x24/0x30 [ 19.367187] drm_bridge_hpd_notify+0x2c/0x6c [ 19.371698] zynqmp_dp_hpd_work_func+0x44/0x54 [ 19.376364] process_one_work+0x3ac/0x988 [ 19.380660] worker_thread+0x398/0x694 [ 19.384736] kthread+0x1bc/0x1c0 [ 19.388241] ret_from_fork+0x10/0x20 [ 19.392031] irq event stamp: 183 [ 19.395450] hardirqs last enabled at (183): [<ffffffc0800b9278>] finish_task_switch.isra.0+0xa8/0x2d4 [ 19.405140] hardirqs last disabled at (182): [<ffffffc081ad3754>] __schedule+0x714/0xd04 [ 19.413612] softirqs last enabled at (114): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.423128] softirqs last disabled at (110): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.432614] ---[ end trace 0000000000000000 ]--- (cherry picked from commit 61ba791c4a7a09a370c45b70a81b8c7d4cf6b2ae) |
| CVE-2024-38663 | In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix list corruption from resetting io stat Since commit 3b8cc6298724 ("blk-cgroup: Optimize blkcg_rstat_flush()"), each iostat instance is added to blkcg percpu list, so blkcg_reset_stats() can't reset the stat instance by memset(), otherwise the llist may be corrupted. Fix the issue by only resetting the counter part. |
| CVE-2024-38662 | In the Linux kernel, the following vulnerability has been resolved: bpf: Allow delete from sockmap/sockhash only if update is allowed We have seen an influx of syzkaller reports where a BPF program attached to a tracepoint triggers a locking rule violation by performing a map_delete on a sockmap/sockhash. We don't intend to support this artificial use scenario. Extend the existing verifier allowed-program-type check for updating sockmap/sockhash to also cover deleting from a map. From now on only BPF programs which were previously allowed to update sockmap/sockhash can delete from these map types. |
| CVE-2024-38661 | In the Linux kernel, the following vulnerability has been resolved: s390/ap: Fix crash in AP internal function modify_bitmap() A system crash like this Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403 Fault in home space mode while using kernel ASCE. AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d Oops: 0038 ilc:3 [#1] PREEMPT SMP Modules linked in: mlx5_ib ... CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8 Hardware name: IBM 3931 A01 704 (LPAR) Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000001 ffffffffffffffc0 0000000000000001 00000048f96b75d3 000000cb00000100 ffffffffffffffff ffffffffffffffff 000000cb7df6fce0 000000cb7df6fce0 00000000ffffffff 000000000000002b 00000048ffffffff 000003ff9b2dbc80 200000cb7df6fcd8 0000014bffffffc0 000000cb7df6fbc8 Krnl Code: 0000014b75e7b5fc: a7840047 brc 8,0000014b75e7b68a 0000014b75e7b600: 18b2 lr %r11,%r2 #0000014b75e7b602: a7f4000a brc 15,0000014b75e7b616 >0000014b75e7b606: eb22d00000e6 laog %r2,%r2,0(%r13) 0000014b75e7b60c: a7680001 lhi %r6,1 0000014b75e7b610: 187b lr %r7,%r11 0000014b75e7b612: 84960021 brxh %r9,%r6,0000014b75e7b654 0000014b75e7b616: 18e9 lr %r14,%r9 Call Trace: [<0000014b75e7b606>] ap_parse_bitmap_str+0x10e/0x1f8 ([<0000014b75e7b5dc>] ap_parse_bitmap_str+0xe4/0x1f8) [<0000014b75e7b758>] apmask_store+0x68/0x140 [<0000014b75679196>] kernfs_fop_write_iter+0x14e/0x1e8 [<0000014b75598524>] vfs_write+0x1b4/0x448 [<0000014b7559894c>] ksys_write+0x74/0x100 [<0000014b7618a440>] __do_syscall+0x268/0x328 [<0000014b761a3558>] system_call+0x70/0x98 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000014b75e7b636>] ap_parse_bitmap_str+0x13e/0x1f8 Kernel panic - not syncing: Fatal exception: panic_on_oops occured when /sys/bus/ap/a[pq]mask was updated with a relative mask value (like +0x10-0x12,+60,-90) with one of the numeric values exceeding INT_MAX. The fix is simple: use unsigned long values for the internal variables. The correct checks are already in place in the function but a simple int for the internal variables was used with the possibility to overflow. |
| CVE-2024-38659 | In the Linux kernel, the following vulnerability has been resolved: enic: Validate length of nl attributes in enic_set_vf_port enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE is of length PORT_PROFILE_MAX and that the nl attributes IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX. These attributes are validated (in the function do_setlink in rtnetlink.c) using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation using the policy is for the max size of the attributes and not on exact size so the length of these attributes might be less than the sizes that enic_set_vf_port expects. This might cause an out of bands read access in the memcpys of the data of these attributes in enic_set_vf_port. |
| CVE-2024-38637 | In the Linux kernel, the following vulnerability has been resolved: greybus: lights: check return of get_channel_from_mode If channel for the given node is not found we return null from get_channel_from_mode. Make sure we validate the return pointer before using it in two of the missing places. This was originally reported in [0]: Found by Linux Verification Center (linuxtesting.org) with SVACE. [0] https://lore.kernel.org/all/[email protected] |
| CVE-2024-38636 | In the Linux kernel, the following vulnerability has been resolved: f2fs: multidev: fix to recognize valid zero block address As reported by Yi Zhang in mailing list [1], kernel warning was catched during zbd/010 test as below: ./check zbd/010 zbd/010 (test gap zone support with F2FS) [failed] runtime ... 3.752s something found in dmesg: [ 4378.146781] run blktests zbd/010 at 2024-02-18 11:31:13 [ 4378.192349] null_blk: module loaded [ 4378.209860] null_blk: disk nullb0 created [ 4378.413285] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 4378.422334] scsi host15: scsi_debug: version 0191 [20210520] dev_size_mb=1024, opts=0x0, submit_queues=1, statistics=0 [ 4378.434922] scsi 15:0:0:0: Direct-Access-ZBC Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 4378.443343] scsi 15:0:0:0: Power-on or device reset occurred [ 4378.449371] sd 15:0:0:0: Attached scsi generic sg5 type 20 [ 4378.449418] sd 15:0:0:0: [sdf] Host-managed zoned block device ... (See '/mnt/tests/gitlab.com/api/v4/projects/19168116/repository/archive.zip/storage/blktests/blk/blktests/results/nodev/zbd/010.dmesg' WARNING: CPU: 22 PID: 44011 at fs/iomap/iter.c:51 CPU: 22 PID: 44011 Comm: fio Not tainted 6.8.0-rc3+ #1 RIP: 0010:iomap_iter+0x32b/0x350 Call Trace: <TASK> __iomap_dio_rw+0x1df/0x830 f2fs_file_read_iter+0x156/0x3d0 [f2fs] aio_read+0x138/0x210 io_submit_one+0x188/0x8c0 __x64_sys_io_submit+0x8c/0x1a0 do_syscall_64+0x86/0x170 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Shinichiro Kawasaki helps to analyse this issue and proposes a potential fixing patch in [2]. Quoted from reply of Shinichiro Kawasaki: "I confirmed that the trigger commit is dbf8e63f48af as Yi reported. I took a look in the commit, but it looks fine to me. So I thought the cause is not in the commit diff. I found the WARN is printed when the f2fs is set up with multiple devices, and read requests are mapped to the very first block of the second device in the direct read path. In this case, f2fs_map_blocks() and f2fs_map_blocks_cached() modify map->m_pblk as the physical block address from each block device. It becomes zero when it is mapped to the first block of the device. However, f2fs_iomap_begin() assumes that map->m_pblk is the physical block address of the whole f2fs, across the all block devices. It compares map->m_pblk against NULL_ADDR == 0, then go into the unexpected branch and sets the invalid iomap->length. The WARN catches the invalid iomap->length. This WARN is printed even for non-zoned block devices, by following steps. - Create two (non-zoned) null_blk devices memory backed with 128MB size each: nullb0 and nullb1. # mkfs.f2fs /dev/nullb0 -c /dev/nullb1 # mount -t f2fs /dev/nullb0 "${mount_dir}" # dd if=/dev/zero of="${mount_dir}/test.dat" bs=1M count=192 # dd if="${mount_dir}/test.dat" of=/dev/null bs=1M count=192 iflag=direct ..." So, the root cause of this issue is: when multi-devices feature is on, f2fs_map_blocks() may return zero blkaddr in non-primary device, which is a verified valid block address, however, f2fs_iomap_begin() treats it as an invalid block address, and then it triggers the warning in iomap framework code. Finally, as discussed, we decide to use a more simple and direct way that checking (map.m_flags & F2FS_MAP_MAPPED) condition instead of (map.m_pblk != NULL_ADDR) to fix this issue. Thanks a lot for the effort of Yi Zhang and Shinichiro Kawasaki on this issue. [1] https://lore.kernel.org/linux-f2fs-devel/CAHj4cs-kfojYC9i0G73PRkYzcxCTex=-vugRFeP40g_URGvnfQ@mail.gmail.com/ [2] https://lore.kernel.org/linux-f2fs-devel/gngdj77k4picagsfdtiaa7gpgnup6fsgwzsltx6milmhegmjff@iax2n4wvrqye/ |
| CVE-2024-38635 | In the Linux kernel, the following vulnerability has been resolved: soundwire: cadence: fix invalid PDI offset For some reason, we add an offset to the PDI, presumably to skip the PDI0 and PDI1 which are reserved for BPT. This code is however completely wrong and leads to an out-of-bounds access. We were just lucky so far since we used only a couple of PDIs and remained within the PDI array bounds. A Fixes: tag is not provided since there are no known platforms where the out-of-bounds would be accessed, and the initial code had problems as well. A follow-up patch completely removes this useless offset. |
| CVE-2024-38634 | In the Linux kernel, the following vulnerability has been resolved: serial: max3100: Lock port->lock when calling uart_handle_cts_change() uart_handle_cts_change() has to be called with port lock taken, Since we run it in a separate work, the lock may not be taken at the time of running. Make sure that it's taken by explicitly doing that. Without it we got a splat: WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0 ... Workqueue: max3100-0 max3100_work [max3100] RIP: 0010:uart_handle_cts_change+0xa6/0xb0 ... max3100_handlerx+0xc5/0x110 [max3100] max3100_work+0x12a/0x340 [max3100] |
| CVE-2024-38633 | In the Linux kernel, the following vulnerability has been resolved: serial: max3100: Update uart_driver_registered on driver removal The removal of the last MAX3100 device triggers the removal of the driver. However, code doesn't update the respective global variable and after insmod — rmmod — insmod cycle the kernel oopses: max3100 spi-PRP0001:01: max3100_probe: adding port 0 BUG: kernel NULL pointer dereference, address: 0000000000000408 ... RIP: 0010:serial_core_register_port+0xa0/0x840 ... max3100_probe+0x1b6/0x280 [max3100] spi_probe+0x8d/0xb0 Update the actual state so next time UART driver will be registered again. Hugo also noticed, that the error path in the probe also affected by having the variable set, and not cleared. Instead of clearing it move the assignment after the successfull uart_register_driver() call. |
| CVE-2024-38632 | In the Linux kernel, the following vulnerability has been resolved: vfio/pci: fix potential memory leak in vfio_intx_enable() If vfio_irq_ctx_alloc() failed will lead to 'name' memory leak. |
| CVE-2024-38631 | In the Linux kernel, the following vulnerability has been resolved: iio: adc: PAC1934: fix accessing out of bounds array index Fix accessing out of bounds array index for average current and voltage measurements. The device itself has only 4 channels, but in sysfs there are "fake" channels for the average voltages and currents too. |
| CVE-2024-38630 | In the Linux kernel, the following vulnerability has been resolved: watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger When the cpu5wdt module is removing, the origin code uses del_timer() to de-activate the timer. If the timer handler is running, del_timer() could not stop it and will return directly. If the port region is released by release_region() and then the timer handler cpu5wdt_trigger() calls outb() to write into the region that is released, the use-after-free bug will happen. Change del_timer() to timer_shutdown_sync() in order that the timer handler could be finished before the port region is released. |
| CVE-2024-38629 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Avoid unnecessary destruction of file_ida file_ida is allocated during cdev open and is freed accordingly during cdev release. This sequence is guaranteed by driver file operations. Therefore, there is no need to destroy an already empty file_ida when the WQ cdev is removed. Worse, ida_free() in cdev release may happen after destruction of file_ida per WQ cdev. This can lead to accessing an id in file_ida after it has been destroyed, resulting in a kernel panic. Remove ida_destroy(&file_ida) to address these issues. |
| CVE-2024-38628 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind. Hang on to the control IDs instead of pointers since those are correctly handled with locks. |
| CVE-2024-38627 | In the Linux kernel, the following vulnerability has been resolved: stm class: Fix a double free in stm_register_device() The put_device(&stm->dev) call will trigger stm_device_release() which frees "stm" so the vfree(stm) on the next line is a double free. |
| CVE-2024-38626 | In the Linux kernel, the following vulnerability has been resolved: fuse: clear FR_SENT when re-adding requests into pending list The following warning was reported by lee bruce: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 8264 at fs/fuse/dev.c:300 fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300 Modules linked in: CPU: 0 PID: 8264 Comm: ab2 Not tainted 6.9.0-rc7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300 ...... Call Trace: <TASK> fuse_dev_do_read.constprop.0+0xd36/0x1dd0 fs/fuse/dev.c:1334 fuse_dev_read+0x166/0x200 fs/fuse/dev.c:1367 call_read_iter include/linux/fs.h:2104 [inline] new_sync_read fs/read_write.c:395 [inline] vfs_read+0x85b/0xba0 fs/read_write.c:476 ksys_read+0x12f/0x260 fs/read_write.c:619 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xce/0x260 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ...... </TASK> The warning is due to the FUSE_NOTIFY_RESEND notify sent by the write() syscall in the reproducer program and it happens as follows: (1) calls fuse_dev_read() to read the INIT request The read succeeds. During the read, bit FR_SENT will be set on the request. (2) calls fuse_dev_write() to send an USE_NOTIFY_RESEND notify The resend notify will resend all processing requests, so the INIT request is moved from processing list to pending list again. (3) calls fuse_dev_read() with an invalid output address fuse_dev_read() will try to copy the same INIT request to the output address, but it will fail due to the invalid address, so the INIT request is ended and triggers the warning in fuse_request_end(). Fix it by clearing FR_SENT when re-adding requests into pending list. |
| CVE-2024-38625 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Check 'folio' pointer for NULL It can be NULL if bmap is called. |
| CVE-2024-38624 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow For example, in the expression: vbo = 2 * vbo + skip |
| CVE-2024-38623 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Use variable length array instead of fixed size Should fix smatch warning: ntfs_set_label() error: __builtin_memcpy() 'uni->name' too small (20 vs 256) |
| CVE-2024-38622 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add callback function pointer check before its call In dpu_core_irq_callback_handler() callback function pointer is compared to NULL, but then callback function is unconditionally called by this pointer. Fix this bug by adding conditional return. Found by Linux Verification Center (linuxtesting.org) with SVACE. Patchwork: https://patchwork.freedesktop.org/patch/588237/ |
| CVE-2024-38621 | In the Linux kernel, the following vulnerability has been resolved: media: stk1160: fix bounds checking in stk1160_copy_video() The subtract in this condition is reversed. The ->length is the length of the buffer. The ->bytesused is how many bytes we have copied thus far. When the condition is reversed that means the result of the subtraction is always negative but since it's unsigned then the result is a very high positive value. That means the overflow check is never true. Additionally, the ->bytesused doesn't actually work for this purpose because we're not writing to "buf->mem + buf->bytesused". Instead, the math to calculate the destination where we are writing is a bit involved. You calculate the number of full lines already written, multiply by two, skip a line if necessary so that we start on an odd numbered line, and add the offset into the line. To fix this buffer overflow, just take the actual destination where we are writing, if the offset is already out of bounds print an error and return. Otherwise, write up to buf->length bytes. |
| CVE-2024-38620 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HCI: Remove HCI_AMP support Since BT_HS has been remove HCI_AMP controllers no longer has any use so remove it along with the capability of creating AMP controllers. Since we no longer need to differentiate between AMP and Primary controllers, as only HCI_PRIMARY is left, this also remove hdev->dev_type altogether. |
| CVE-2024-38619 | In the Linux kernel, the following vulnerability has been resolved: usb-storage: alauda: Check whether the media is initialized The member "uzonesize" of struct alauda_info will remain 0 if alauda_init_media() fails, potentially causing divide errors in alauda_read_data() and alauda_write_lba(). - Add a member "media_initialized" to struct alauda_info. - Change a condition in alauda_check_media() to ensure the first initialization. - Add an error check for the return value of alauda_init_media(). |
| CVE-2024-38618 | In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Set lower bound of start tick time Currently ALSA timer doesn't have the lower limit of the start tick time, and it allows a very small size, e.g. 1 tick with 1ns resolution for hrtimer. Such a situation may lead to an unexpected RCU stall, where the callback repeatedly queuing the expire update, as reported by fuzzer. This patch introduces a sanity check of the timer start tick time, so that the system returns an error when a too small start size is set. As of this patch, the lower limit is hard-coded to 100us, which is small enough but can still work somehow. |
| CVE-2024-38617 | In the Linux kernel, the following vulnerability has been resolved: kunit/fortify: Fix mismatched kvalloc()/vfree() usage The kv*() family of tests were accidentally freeing with vfree() instead of kvfree(). Use kvfree() instead. |
| CVE-2024-38616 | In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: re-fix fortified-memset warning The carl9170_tx_release() function sometimes triggers a fortified-memset warning in my randconfig builds: In file included from include/linux/string.h:254, from drivers/net/wireless/ath/carl9170/tx.c:40: In function 'fortify_memset_chk', inlined from 'carl9170_tx_release' at drivers/net/wireless/ath/carl9170/tx.c:283:2, inlined from 'kref_put' at include/linux/kref.h:65:3, inlined from 'carl9170_tx_put_skb' at drivers/net/wireless/ath/carl9170/tx.c:342:9: include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 493 | __write_overflow_field(p_size_field, size); Kees previously tried to avoid this by using memset_after(), but it seems this does not fully address the problem. I noticed that the memset_after() here is done on a different part of the union (status) than the original cast was from (rate_driver_data), which may confuse the compiler. Unfortunately, the memset_after() trick does not work on driver_rates[] because that is part of an anonymous struct, and I could not get struct_group() to do this either. Using two separate memset() calls on the two members does address the warning though. |
| CVE-2024-38615 | In the Linux kernel, the following vulnerability has been resolved: cpufreq: exit() callback is optional The exit() callback is optional and shouldn't be called without checking a valid pointer first. Also, we must clear freq_table pointer even if the exit() callback isn't present. |
| CVE-2024-38614 | In the Linux kernel, the following vulnerability has been resolved: openrisc: traps: Don't send signals to kernel mode threads OpenRISC exception handling sends signals to user processes on floating point exceptions and trap instructions (for debugging) among others. There is a bug where the trap handling logic may send signals to kernel threads, we should not send these signals to kernel threads, if that happens we treat it as an error. This patch adds conditions to die if the kernel receives these exceptions in kernel mode code. |
| CVE-2024-38613 | In the Linux kernel, the following vulnerability has been resolved: m68k: Fix spinlock race in kernel thread creation Context switching does take care to retain the correct lock owner across the switch from 'prev' to 'next' tasks. This does rely on interrupts remaining disabled for the entire duration of the switch. This condition is guaranteed for normal process creation and context switching between already running processes, because both 'prev' and 'next' already have interrupts disabled in their saved copies of the status register. The situation is different for newly created kernel threads. The status register is set to PS_S in copy_thread(), which does leave the IPL at 0. Upon restoring the 'next' thread's status register in switch_to() aka resume(), interrupts then become enabled prematurely. resume() then returns via ret_from_kernel_thread() and schedule_tail() where run queue lock is released (see finish_task_switch() and finish_lock_switch()). A timer interrupt calling scheduler_tick() before the lock is released in finish_task_switch() will find the lock already taken, with the current task as lock owner. This causes a spinlock recursion warning as reported by Guenter Roeck. As far as I can ascertain, this race has been opened in commit 533e6903bea0 ("m68k: split ret_from_fork(), simplify kernel_thread()") but I haven't done a detailed study of kernel history so it may well predate that commit. Interrupts cannot be disabled in the saved status register copy for kernel threads (init will complain about interrupts disabled when finally starting user space). Disable interrupts temporarily when switching the tasks' register sets in resume(). Note that a simple oriw 0x700,%sr after restoring sr is not enough here - this leaves enough of a race for the 'spinlock recursion' warning to still be observed. Tested on ARAnyM and qemu (Quadra 800 emulation). |
| CVE-2024-38612 | In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix invalid unregister error path The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL is not defined. In that case if seg6_hmac_init() fails, the genl_unregister_family() isn't called. This issue exist since commit 46738b1317e1 ("ipv6: sr: add option to control lwtunnel support"), and commit 5559cea2d5aa ("ipv6: sr: fix possible use-after-free and null-ptr-deref") replaced unregister_pernet_subsys() with genl_unregister_family() in this error path. |
| CVE-2024-38611 | In the Linux kernel, the following vulnerability has been resolved: media: i2c: et8ek8: Don't strip remove function when driver is builtin Using __exit for the remove function results in the remove callback being discarded with CONFIG_VIDEO_ET8EK8=y. When such a device gets unbound (e.g. using sysfs or hotplug), the driver is just removed without the cleanup being performed. This results in resource leaks. Fix it by compiling in the remove callback unconditionally. This also fixes a W=1 modpost warning: WARNING: modpost: drivers/media/i2c/et8ek8/et8ek8: section mismatch in reference: et8ek8_i2c_driver+0x10 (section: .data) -> et8ek8_remove (section: .exit.text) |
| CVE-2024-38610 | In the Linux kernel, the following vulnerability has been resolved: drivers/virt/acrn: fix PFNMAP PTE checks in acrn_vm_ram_map() Patch series "mm: follow_pte() improvements and acrn follow_pte() fixes". Patch #1 fixes a bunch of issues I spotted in the acrn driver. It compiles, that's all I know. I'll appreciate some review and testing from acrn folks. Patch #2+#3 improve follow_pte(), passing a VMA instead of the MM, adding more sanity checks, and improving the documentation. Gave it a quick test on x86-64 using VM_PAT that ends up using follow_pte(). This patch (of 3): We currently miss handling various cases, resulting in a dangerous follow_pte() (previously follow_pfn()) usage. (1) We're not checking PTE write permissions. Maybe we should simply always require pte_write() like we do for pin_user_pages_fast(FOLL_WRITE)? Hard to tell, so let's check for ACRN_MEM_ACCESS_WRITE for now. (2) We're not rejecting refcounted pages. As we are not using MMU notifiers, messing with refcounted pages is dangerous and can result in use-after-free. Let's make sure to reject them. (3) We are only looking at the first PTE of a bigger range. We only lookup a single PTE, but memmap->len may span a larger area. Let's loop over all involved PTEs and make sure the PFN range is actually contiguous. Reject everything else: it couldn't have worked either way, and rather made use access PFNs we shouldn't be accessing. |
| CVE-2024-38609 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: check for null before dereferencing The wcid can be NULL. It should be checked for validity before dereferencing it to avoid crash. |
| CVE-2024-38608 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix netif state handling mlx5e_suspend cleans resources only if netif_device_present() returns true. However, mlx5e_resume changes the state of netif, via mlx5e_nic_enable, only if reg_state == NETREG_REGISTERED. In the below case, the above leads to NULL-ptr Oops[1] and memory leaks: mlx5e_probe _mlx5e_resume mlx5e_attach_netdev mlx5e_nic_enable <-- netdev not reg, not calling netif_device_attach() register_netdev <-- failed for some reason. ERROR_FLOW: _mlx5e_suspend <-- netif_device_present return false, resources aren't freed :( Hence, clean resources in this case as well. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9345 Comm: test-ovs-ct-gen Not tainted 6.5.0_for_upstream_min_debug_2023_09_05_16_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at0xffffffffffffffd6. RSP: 0018:ffff888178aaf758 EFLAGS: 00010246 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x14c/0x3c0 ? exc_page_fault+0x75/0x140 ? asm_exc_page_fault+0x22/0x30 notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_uplink_netdev_event_replay+0x3e/0x60 [mlx5_core] mlx5_mdev_netdev_track+0x53/0x60 [mlx5_ib] mlx5_ib_roce_init+0xc3/0x340 [mlx5_ib] __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe1/0x210 [mlx5_ib] ? auxiliary_match_id+0x6a/0x90 auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x637/0x840 __auxiliary_device_add+0x3b/0xa0 add_adev+0xc9/0x140 [mlx5_core] mlx5_rescan_drivers_locked+0x22a/0x310 [mlx5_core] mlx5_register_device+0x53/0xa0 [mlx5_core] mlx5_init_one_devl_locked+0x5c4/0x9c0 [mlx5_core] mlx5_init_one+0x3b/0x60 [mlx5_core] probe_one+0x44c/0x730 [mlx5_core] local_pci_probe+0x3e/0x90 pci_device_probe+0xbf/0x210 ? kernfs_create_link+0x5d/0xa0 ? sysfs_do_create_link_sd+0x60/0xc0 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 pci_bus_add_device+0x54/0x80 pci_iov_add_virtfn+0x2e6/0x320 sriov_enable+0x208/0x420 mlx5_core_sriov_configure+0x9e/0x200 [mlx5_core] sriov_numvfs_store+0xae/0x1a0 kernfs_fop_write_iter+0x10c/0x1a0 vfs_write+0x291/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- |
| CVE-2024-38607 | In the Linux kernel, the following vulnerability has been resolved: macintosh/via-macii: Fix "BUG: sleeping function called from invalid context" The via-macii ADB driver calls request_irq() after disabling hard interrupts. But disabling interrupts isn't necessary here because the VIA shift register interrupt was masked during VIA1 initialization. |
| CVE-2024-38606 | In the Linux kernel, the following vulnerability has been resolved: crypto: qat - validate slices count returned by FW The function adf_send_admin_tl_start() enables the telemetry (TL) feature on a QAT device by sending the ICP_QAT_FW_TL_START message to the firmware. This triggers the FW to start writing TL data to a DMA buffer in memory and returns an array containing the number of accelerators of each type (slices) supported by this HW. The pointer to this array is stored in the adf_tl_hw_data data structure called slice_cnt. The array slice_cnt is then used in the function tl_print_dev_data() to report in debugfs only statistics about the supported accelerators. An incorrect value of the elements in slice_cnt might lead to an out of bounds memory read. At the moment, there isn't an implementation of FW that returns a wrong value, but for robustness validate the slice count array returned by FW. |
| CVE-2024-38605 | In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix NULL module pointer assignment at card init The commit 81033c6b584b ("ALSA: core: Warn on empty module") introduced a WARN_ON() for a NULL module pointer passed at snd_card object creation, and it also wraps the code around it with '#ifdef MODULE'. This works in most cases, but the devils are always in details. "MODULE" is defined when the target code (i.e. the sound core) is built as a module; but this doesn't mean that the caller is also built-in or not. Namely, when only the sound core is built-in (CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m), the passed module pointer is ignored even if it's non-NULL, and card->module remains as NULL. This would result in the missing module reference up/down at the device open/close, leading to a race with the code execution after the module removal. For addressing the bug, move the assignment of card->module again out of ifdef. The WARN_ON() is still wrapped with ifdef because the module can be really NULL when all sound drivers are built-in. Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would lead to a false-positive NULL module check. Admittedly it won't catch perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no real problem as it's only for debugging, and the condition is pretty rare. |
| CVE-2024-38604 | In the Linux kernel, the following vulnerability has been resolved: block: refine the EOF check in blkdev_iomap_begin blkdev_iomap_begin rounds down the offset to the logical block size before stashing it in iomap->offset and checking that it still is inside the inode size. Check the i_size check to the raw pos value so that we don't try a zero size write if iter->pos is unaligned. |
| CVE-2024-38603 | In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset() pci_alloc_irq_vectors() allocates an irq vector. When devm_add_action() fails, the irq vector is not freed, which leads to a memory leak. Replace the devm_add_action with devm_add_action_or_reset to ensure the irq vector can be destroyed when it fails. |
| CVE-2024-38602 | In the Linux kernel, the following vulnerability has been resolved: ax25: Fix reference count leak issues of ax25_dev The ax25_addr_ax25dev() and ax25_dev_device_down() exist a reference count leak issue of the object "ax25_dev". Memory leak issue in ax25_addr_ax25dev(): The reference count of the object "ax25_dev" can be increased multiple times in ax25_addr_ax25dev(). This will cause a memory leak. Memory leak issues in ax25_dev_device_down(): The reference count of ax25_dev is set to 1 in ax25_dev_device_up() and then increase the reference count when ax25_dev is added to ax25_dev_list. As a result, the reference count of ax25_dev is 2. But when the device is shutting down. The ax25_dev_device_down() drops the reference count once or twice depending on if we goto unlock_put or not, which will cause memory leak. As for the issue of ax25_addr_ax25dev(), it is impossible for one pointer to be on a list twice. So add a break in ax25_addr_ax25dev(). As for the issue of ax25_dev_device_down(), increase the reference count of ax25_dev once in ax25_dev_device_up() and decrease the reference count of ax25_dev after it is removed from the ax25_dev_list. |
| CVE-2024-38601 | In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix a race between readers and resize checks The reader code in rb_get_reader_page() swaps a new reader page into the ring buffer by doing cmpxchg on old->list.prev->next to point it to the new page. Following that, if the operation is successful, old->list.next->prev gets updated too. This means the underlying doubly-linked list is temporarily inconsistent, page->prev->next or page->next->prev might not be equal back to page for some page in the ring buffer. The resize operation in ring_buffer_resize() can be invoked in parallel. It calls rb_check_pages() which can detect the described inconsistency and stop further tracing: [ 190.271762] ------------[ cut here ]------------ [ 190.271771] WARNING: CPU: 1 PID: 6186 at kernel/trace/ring_buffer.c:1467 rb_check_pages.isra.0+0x6a/0xa0 [ 190.271789] Modules linked in: [...] [ 190.271991] Unloaded tainted modules: intel_uncore_frequency(E):1 skx_edac(E):1 [ 190.272002] CPU: 1 PID: 6186 Comm: cmd.sh Kdump: loaded Tainted: G E 6.9.0-rc6-default #5 158d3e1e6d0b091c34c3b96bfd99a1c58306d79f [ 190.272011] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014 [ 190.272015] RIP: 0010:rb_check_pages.isra.0+0x6a/0xa0 [ 190.272023] Code: [...] [ 190.272028] RSP: 0018:ffff9c37463abb70 EFLAGS: 00010206 [ 190.272034] RAX: ffff8eba04b6cb80 RBX: 0000000000000007 RCX: ffff8eba01f13d80 [ 190.272038] RDX: ffff8eba01f130c0 RSI: ffff8eba04b6cd00 RDI: ffff8eba0004c700 [ 190.272042] RBP: ffff8eba0004c700 R08: 0000000000010002 R09: 0000000000000000 [ 190.272045] R10: 00000000ffff7f52 R11: ffff8eba7f600000 R12: ffff8eba0004c720 [ 190.272049] R13: ffff8eba00223a00 R14: 0000000000000008 R15: ffff8eba067a8000 [ 190.272053] FS: 00007f1bd64752c0(0000) GS:ffff8eba7f680000(0000) knlGS:0000000000000000 [ 190.272057] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 190.272061] CR2: 00007f1bd6662590 CR3: 000000010291e001 CR4: 0000000000370ef0 [ 190.272070] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 190.272073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 190.272077] Call Trace: [ 190.272098] <TASK> [ 190.272189] ring_buffer_resize+0x2ab/0x460 [ 190.272199] __tracing_resize_ring_buffer.part.0+0x23/0xa0 [ 190.272206] tracing_resize_ring_buffer+0x65/0x90 [ 190.272216] tracing_entries_write+0x74/0xc0 [ 190.272225] vfs_write+0xf5/0x420 [ 190.272248] ksys_write+0x67/0xe0 [ 190.272256] do_syscall_64+0x82/0x170 [ 190.272363] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 190.272373] RIP: 0033:0x7f1bd657d263 [ 190.272381] Code: [...] [ 190.272385] RSP: 002b:00007ffe72b643f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 190.272391] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1bd657d263 [ 190.272395] RDX: 0000000000000002 RSI: 0000555a6eb538e0 RDI: 0000000000000001 [ 190.272398] RBP: 0000555a6eb538e0 R08: 000000000000000a R09: 0000000000000000 [ 190.272401] R10: 0000555a6eb55190 R11: 0000000000000246 R12: 00007f1bd6662500 [ 190.272404] R13: 0000000000000002 R14: 00007f1bd6667c00 R15: 0000000000000002 [ 190.272412] </TASK> [ 190.272414] ---[ end trace 0000000000000000 ]--- Note that ring_buffer_resize() calls rb_check_pages() only if the parent trace_buffer has recording disabled. Recent commit d78ab792705c ("tracing: Stop current tracer when resizing buffer") causes that it is now always the case which makes it more likely to experience this issue. The window to hit this race is nonetheless very small. To help reproducing it, one can add a delay loop in rb_get_reader_page(): ret = rb_head_page_replace(reader, cpu_buffer->reader_page); if (!ret) goto spin; for (unsigned i = 0; i < 1U << 26; i++) /* inserted delay loop */ __asm__ __volatile__ ("" : : : "memory"); rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list; .. ---truncated--- |
| CVE-2024-38600 | In the Linux kernel, the following vulnerability has been resolved: ALSA: Fix deadlocks with kctl removals at disconnection In snd_card_disconnect(), we set card->shutdown flag at the beginning, call callbacks and do sync for card->power_ref_sleep waiters at the end. The callback may delete a kctl element, and this can lead to a deadlock when the device was in the suspended state. Namely: * A process waits for the power up at snd_power_ref_and_wait() in snd_ctl_info() or read/write() inside card->controls_rwsem. * The system gets disconnected meanwhile, and the driver tries to delete a kctl via snd_ctl_remove*(); it tries to take card->controls_rwsem again, but this is already locked by the above. Since the sleeper isn't woken up, this deadlocks. An easy fix is to wake up sleepers before processing the driver disconnect callbacks but right after setting the card->shutdown flag. Then all sleepers will abort immediately, and the code flows again. So, basically this patch moves the wait_event() call at the right timing. While we're at it, just to be sure, call wait_event_all() instead of wait_event(), although we don't use exclusive events on this queue for now. |
| CVE-2024-38599 | In the Linux kernel, the following vulnerability has been resolved: jffs2: prevent xattr node from overflowing the eraseblock Add a check to make sure that the requested xattr node size is no larger than the eraseblock minus the cleanmarker. Unlike the usual inode nodes, the xattr nodes aren't split into parts and spread across multiple eraseblocks, which means that a xattr node must not occupy more than one eraseblock. If the requested xattr value is too large, the xattr node can spill onto the next eraseblock, overwriting the nodes and causing errors such as: jffs2: argh. node added in wrong place at 0x0000b050(2) jffs2: nextblock 0x0000a000, expected at 0000b00c jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050, read=0xfc892c93, calc=0x000000 jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed at 0x01e00c. {848f,2fc4,0fef511f,59a3d171} jffs2: Node at 0x0000000c with length 0x00001044 would run over the end of the erase block jffs2: Perhaps the file system was created with the wrong erase size? jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x1044 instead This breaks the filesystem and can lead to KASAN crashes such as: BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0 Read of size 4 at addr ffff88802c31e914 by task repro/830 CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xc4/0x620 ? __virt_addr_valid+0x308/0x5b0 kasan_report+0xc1/0xf0 ? jffs2_sum_add_kvec+0x125e/0x15d0 ? jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_flash_direct_writev+0xa8/0xd0 jffs2_flash_writev+0x9c9/0xef0 ? __x64_sys_setxattr+0xc4/0x160 ? do_syscall_64+0x69/0x140 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| CVE-2024-38598 | In the Linux kernel, the following vulnerability has been resolved: md: fix resync softlockup when bitmap size is less than array size Is is reported that for dm-raid10, lvextend + lvchange --syncaction will trigger following softlockup: kernel:watchdog: BUG: soft lockup - CPU#3 stuck for 26s! [mdX_resync:6976] CPU: 7 PID: 3588 Comm: mdX_resync Kdump: loaded Not tainted 6.9.0-rc4-next-20240419 #1 RIP: 0010:_raw_spin_unlock_irq+0x13/0x30 Call Trace: <TASK> md_bitmap_start_sync+0x6b/0xf0 raid10_sync_request+0x25c/0x1b40 [raid10] md_do_sync+0x64b/0x1020 md_thread+0xa7/0x170 kthread+0xcf/0x100 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1a/0x30 And the detailed process is as follows: md_do_sync j = mddev->resync_min while (j < max_sectors) sectors = raid10_sync_request(mddev, j, &skipped) if (!md_bitmap_start_sync(..., &sync_blocks)) // md_bitmap_start_sync set sync_blocks to 0 return sync_blocks + sectors_skippe; // sectors = 0; j += sectors; // j never change Root cause is that commit 301867b1c168 ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter") return early from md_bitmap_get_counter(), without setting returned blocks. Fix this problem by always set returned blocks from md_bitmap_get_counter"(), as it used to be. Noted that this patch just fix the softlockup problem in kernel, the case that bitmap size doesn't match array size still need to be fixed. |
| CVE-2024-38597 | In the Linux kernel, the following vulnerability has been resolved: eth: sungem: remove .ndo_poll_controller to avoid deadlocks Erhard reports netpoll warnings from sungem: netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (gem_start_xmit+0x0/0x398) WARNING: CPU: 1 PID: 1 at net/core/netpoll.c:370 netpoll_send_skb+0x1fc/0x20c gem_poll_controller() disables interrupts, which may sleep. We can't sleep in netpoll, it has interrupts disabled completely. Strangely, gem_poll_controller() doesn't even poll the completions, and instead acts as if an interrupt has fired so it just schedules NAPI and exits. None of this has been necessary for years, since netpoll invokes NAPI directly. |
| CVE-2024-38596 | In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg A data-race condition has been identified in af_unix. In one data path, the write function unix_release_sock() atomically writes to sk->sk_shutdown using WRITE_ONCE. However, on the reader side, unix_stream_sendmsg() does not read it atomically. Consequently, this issue is causing the following KCSAN splat to occur: BUG: KCSAN: data-race in unix_release_sock / unix_stream_sendmsg write (marked) to 0xffff88867256ddbb of 1 bytes by task 7270 on cpu 28: unix_release_sock (net/unix/af_unix.c:640) unix_release (net/unix/af_unix.c:1050) sock_close (net/socket.c:659 net/socket.c:1421) __fput (fs/file_table.c:422) __fput_sync (fs/file_table.c:508) __se_sys_close (fs/open.c:1559 fs/open.c:1541) __x64_sys_close (fs/open.c:1541) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) read to 0xffff88867256ddbb of 1 bytes by task 989 on cpu 14: unix_stream_sendmsg (net/unix/af_unix.c:2273) __sock_sendmsg (net/socket.c:730 net/socket.c:745) ____sys_sendmsg (net/socket.c:2584) __sys_sendmmsg (net/socket.c:2638 net/socket.c:2724) __x64_sys_sendmmsg (net/socket.c:2753 net/socket.c:2750 net/socket.c:2750) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) value changed: 0x01 -> 0x03 The line numbers are related to commit dd5a440a31fa ("Linux 6.9-rc7"). Commit e1d09c2c2f57 ("af_unix: Fix data races around sk->sk_shutdown.") addressed a comparable issue in the past regarding sk->sk_shutdown. However, it overlooked resolving this particular data path. This patch only offending unix_stream_sendmsg() function, since the other reads seem to be protected by unix_state_lock() as discussed in |
| CVE-2024-38595 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix peer devlink set for SF representor devlink port The cited patch change register devlink flow, and neglect to reflect the changes for peer devlink set logic. Peer devlink set is triggering a call trace if done after devl_register.[1] Hence, align peer devlink set logic with register devlink flow. [1] WARNING: CPU: 4 PID: 3394 at net/devlink/core.c:155 devlink_rel_nested_in_add+0x177/0x180 CPU: 4 PID: 3394 Comm: kworker/u40:1 Not tainted 6.9.0-rc4_for_linust_min_debug_2024_04_16_14_08 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_vhca_event0 mlx5_vhca_state_work_handler [mlx5_core] RIP: 0010:devlink_rel_nested_in_add+0x177/0x180 Call Trace: <TASK> ? __warn+0x78/0x120 ? devlink_rel_nested_in_add+0x177/0x180 ? report_bug+0x16d/0x180 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_port_init+0x30/0x30 ? devlink_port_type_clear+0x50/0x50 ? devlink_rel_nested_in_add+0x177/0x180 ? devlink_rel_nested_in_add+0xdd/0x180 mlx5_sf_mdev_event+0x74/0xb0 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_sf_dev_probe+0x185/0x3e0 [mlx5_core] auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc5/0x3a0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x64f/0x860 __auxiliary_device_add+0x3b/0xa0 mlx5_sf_dev_add+0x139/0x330 [mlx5_core] mlx5_sf_dev_state_change_handler+0x1e4/0x250 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core] process_one_work+0x13f/0x2e0 worker_thread+0x2bd/0x3c0 ? rescuer_thread+0x410/0x410 kthread+0xc4/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x50 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> |
| CVE-2024-38594 | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: move the EST lock to struct stmmac_priv Reinitialize the whole EST structure would also reset the mutex lock which is embedded in the EST structure, and then trigger the following warning. To address this, move the lock to struct stmmac_priv. We also need to reacquire the mutex lock when doing this initialization. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068 Modules linked in: CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty #29 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mutex_lock+0xd84/0x1068 lr : __mutex_lock+0xd84/0x1068 sp : ffffffc0864e3570 x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003 x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000 x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8 x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698 x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027 x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: __mutex_lock+0xd84/0x1068 mutex_lock_nested+0x28/0x34 tc_setup_taprio+0x118/0x68c stmmac_setup_tc+0x50/0xf0 taprio_change+0x868/0xc9c |
| CVE-2024-38593 | In the Linux kernel, the following vulnerability has been resolved: net: micrel: Fix receiving the timestamp in the frame for lan8841 The blamed commit started to use the ptp workqueue to get the second part of the timestamp. And when the port was set down, then this workqueue is stopped. But if the config option NETWORK_PHY_TIMESTAMPING is not enabled, then the ptp_clock is not initialized so then it would crash when it would try to access the delayed work. So then basically by setting up and then down the port, it would crash. The fix consists in checking if the ptp_clock is initialized and only then cancel the delayed work. |
| CVE-2024-38592 | In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Init `ddp_comp` with devm_kcalloc() In the case where `conn_routes` is true we allocate an extra slot in the `ddp_comp` array but mtk_drm_crtc_create() never seemed to initialize it in the test case I ran. For me, this caused a later crash when we looped through the array in mtk_drm_crtc_mode_valid(). This showed up for me when I booted with `slub_debug=FZPUA` which poisons the memory initially. Without `slub_debug` I couldn't reproduce, presumably because the later code handles the value being NULL and in most cases (not guaranteed in all cases) the memory the allocator returned started out as 0. It really doesn't hurt to initialize the array with devm_kcalloc() since the array is small and the overhead of initting a handful of elements to 0 is small. In general initting memory to zero is a safer practice and usually it's suggested to only use the non-initting alloc functions if you really need to. Let's switch the function to use an allocation function that zeros the memory. For me, this avoids the crash. |
| CVE-2024-38591 | In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix deadlock on SRQ async events. xa_lock for SRQ table may be required in AEQ. Use xa_store_irq()/ xa_erase_irq() to avoid deadlock. |
| CVE-2024-38590 | In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Modify the print level of CQE error Too much print may lead to a panic in kernel. Change ibdev_err() to ibdev_err_ratelimited(), and change the printing level of cqe dump to debug level. |
| CVE-2024-38589 | In the Linux kernel, the following vulnerability has been resolved: netrom: fix possible dead-lock in nr_rt_ioctl() syzbot loves netrom, and found a possible deadlock in nr_rt_ioctl [1] Make sure we always acquire nr_node_list_lock before nr_node_lock(nr_node) [1] WARNING: possible circular locking dependency detected 6.9.0-rc7-syzkaller-02147-g654de42f3fc6 #0 Not tainted ------------------------------------------------------ syz-executor350/5129 is trying to acquire lock: ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_node_lock include/net/netrom.h:152 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:464 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697 but task is already holding lock: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline] ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_rt_ioctl+0x10a/0x1090 net/netrom/nr_route.c:697 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (nr_node_list_lock){+...}-{2:2}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_remove_node net/netrom/nr_route.c:299 [inline] nr_del_node+0x4b4/0x820 net/netrom/nr_route.c:355 nr_rt_ioctl+0xa95/0x1090 net/netrom/nr_route.c:683 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (&nr_node->node_lock){+...}-{2:2}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_node_lock include/net/netrom.h:152 [inline] nr_dec_obs net/netrom/nr_route.c:464 [inline] nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(nr_node_list_lock); lock(&nr_node->node_lock); lock(nr_node_list_lock); lock(&nr_node->node_lock); *** DEADLOCK *** 1 lock held by syz-executor350/5129: #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline] #0: ffffffff8f70 ---truncated--- |
| CVE-2024-38588 | In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix possible use-after-free issue in ftrace_location() KASAN reports a bug: BUG: KASAN: use-after-free in ftrace_location+0x90/0x120 Read of size 8 at addr ffff888141d40010 by task insmod/424 CPU: 8 PID: 424 Comm: insmod Tainted: G W 6.9.0-rc2+ [...] Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcf/0x610 kasan_report+0xb5/0xe0 ftrace_location+0x90/0x120 register_kprobe+0x14b/0xa40 kprobe_init+0x2d/0xff0 [kprobe_example] do_one_initcall+0x8f/0x2d0 do_init_module+0x13a/0x3c0 load_module+0x3082/0x33d0 init_module_from_file+0xd2/0x130 __x64_sys_finit_module+0x306/0x440 do_syscall_64+0x68/0x140 entry_SYSCALL_64_after_hwframe+0x71/0x79 The root cause is that, in lookup_rec(), ftrace record of some address is being searched in ftrace pages of some module, but those ftrace pages at the same time is being freed in ftrace_release_mod() as the corresponding module is being deleted: CPU1 | CPU2 register_kprobes() { | delete_module() { check_kprobe_address_safe() { | arch_check_ftrace_location() { | ftrace_location() { | lookup_rec() // USE! | ftrace_release_mod() // Free! To fix this issue: 1. Hold rcu lock as accessing ftrace pages in ftrace_location_range(); 2. Use ftrace_location_range() instead of lookup_rec() in ftrace_location(); 3. Call synchronize_rcu() before freeing any ftrace pages both in ftrace_process_locs()/ftrace_release_mod()/ftrace_free_mem(). |
| CVE-2024-38587 | In the Linux kernel, the following vulnerability has been resolved: speakup: Fix sizeof() vs ARRAY_SIZE() bug The "buf" pointer is an array of u16 values. This code should be using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512), otherwise it can the still got out of bounds. |
| CVE-2024-38586 | In the Linux kernel, the following vulnerability has been resolved: r8169: Fix possible ring buffer corruption on fragmented Tx packets. An issue was found on the RTL8125b when transmitting small fragmented packets, whereby invalid entries were inserted into the transmit ring buffer, subsequently leading to calls to dma_unmap_single() with a null address. This was caused by rtl8169_start_xmit() not noticing changes to nr_frags which may occur when small packets are padded (to work around hardware quirks) in rtl8169_tso_csum_v2(). To fix this, postpone inspecting nr_frags until after any padding has been applied. |
| CVE-2024-38585 | In the Linux kernel, the following vulnerability has been resolved: tools/nolibc/stdlib: fix memory error in realloc() Pass user_p_len to memcpy() instead of heap->len to prevent realloc() from copying an extra sizeof(heap) bytes from beyond the allocated region. |
| CVE-2024-38584 | In the Linux kernel, the following vulnerability has been resolved: net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe() In the prueth_probe() function, if one of the calls to emac_phy_connect() fails due to of_phy_connect() returning NULL, then the subsequent call to phy_attached_info() will dereference a NULL pointer. Check the return code of emac_phy_connect and fail cleanly if there is an error. |
| CVE-2024-38583 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free of timer for log writer thread Patch series "nilfs2: fix log writer related issues". This bug fix series covers three nilfs2 log writer-related issues, including a timer use-after-free issue and potential deadlock issue on unmount, and a potential freeze issue in event synchronization found during their analysis. Details are described in each commit log. This patch (of 3): A use-after-free issue has been reported regarding the timer sc_timer on the nilfs_sc_info structure. The problem is that even though it is used to wake up a sleeping log writer thread, sc_timer is not shut down until the nilfs_sc_info structure is about to be freed, and is used regardless of the thread's lifetime. Fix this issue by limiting the use of sc_timer only while the log writer thread is alive. |
| CVE-2024-38582 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential hang in nilfs_detach_log_writer() Syzbot has reported a potential hang in nilfs_detach_log_writer() called during nilfs2 unmount. Analysis revealed that this is because nilfs_segctor_sync(), which synchronizes with the log writer thread, can be called after nilfs_segctor_destroy() terminates that thread, as shown in the call trace below: nilfs_detach_log_writer nilfs_segctor_destroy nilfs_segctor_kill_thread --> Shut down log writer thread flush_work nilfs_iput_work_func nilfs_dispose_list iput nilfs_evict_inode nilfs_transaction_commit nilfs_construct_segment (if inode needs sync) nilfs_segctor_sync --> Attempt to synchronize with log writer thread *** DEADLOCK *** Fix this issue by changing nilfs_segctor_sync() so that the log writer thread returns normally without synchronizing after it terminates, and by forcing tasks that are already waiting to complete once after the thread terminates. The skipped inode metadata flushout will then be processed together in the subsequent cleanup work in nilfs_segctor_destroy(). |
| CVE-2024-38581 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/mes: fix use-after-free issue Delete fence fallback timer to fix the ramdom use-after-free issue. v2: move to amdgpu_mes.c |
| CVE-2024-38580 | In the Linux kernel, the following vulnerability has been resolved: epoll: be better about file lifetimes epoll can call out to vfs_poll() with a file pointer that may race with the last 'fput()'. That would make f_count go down to zero, and while the ep->mtx locking means that the resulting file pointer tear-down will be blocked until the poll returns, it means that f_count is already dead, and any use of it won't actually get a reference to the file any more: it's dead regardless. Make sure we have a valid ref on the file pointer before we call down to vfs_poll() from the epoll routines. |
| CVE-2024-38579 | In the Linux kernel, the following vulnerability has been resolved: crypto: bcm - Fix pointer arithmetic In spu2_dump_omd() value of ptr is increased by ciph_key_len instead of hash_iv_len which could lead to going beyond the buffer boundaries. Fix this bug by changing ciph_key_len to hash_iv_len. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-38578 | In the Linux kernel, the following vulnerability has been resolved: ecryptfs: Fix buffer size for tag 66 packet The 'TAG 66 Packet Format' description is missing the cipher code and checksum fields that are packed into the message packet. As a result, the buffer allocated for the packet is 3 bytes too small and write_tag_66_packet() will write up to 3 bytes past the end of the buffer. Fix this by increasing the size of the allocation so the whole packet will always fit in the buffer. This fixes the below kasan slab-out-of-bounds bug: BUG: KASAN: slab-out-of-bounds in ecryptfs_generate_key_packet_set+0x7d6/0xde0 Write of size 1 at addr ffff88800afbb2a5 by task touch/181 CPU: 0 PID: 181 Comm: touch Not tainted 6.6.13-gnu #1 4c9534092be820851bb687b82d1f92a426598dc6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2/GNU Guix 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4c/0x70 print_report+0xc5/0x610 ? ecryptfs_generate_key_packet_set+0x7d6/0xde0 ? kasan_complete_mode_report_info+0x44/0x210 ? ecryptfs_generate_key_packet_set+0x7d6/0xde0 kasan_report+0xc2/0x110 ? ecryptfs_generate_key_packet_set+0x7d6/0xde0 __asan_store1+0x62/0x80 ecryptfs_generate_key_packet_set+0x7d6/0xde0 ? __pfx_ecryptfs_generate_key_packet_set+0x10/0x10 ? __alloc_pages+0x2e2/0x540 ? __pfx_ovl_open+0x10/0x10 [overlay 30837f11141636a8e1793533a02e6e2e885dad1d] ? dentry_open+0x8f/0xd0 ecryptfs_write_metadata+0x30a/0x550 ? __pfx_ecryptfs_write_metadata+0x10/0x10 ? ecryptfs_get_lower_file+0x6b/0x190 ecryptfs_initialize_file+0x77/0x150 ecryptfs_create+0x1c2/0x2f0 path_openat+0x17cf/0x1ba0 ? __pfx_path_openat+0x10/0x10 do_filp_open+0x15e/0x290 ? __pfx_do_filp_open+0x10/0x10 ? __kasan_check_write+0x18/0x30 ? _raw_spin_lock+0x86/0xf0 ? __pfx__raw_spin_lock+0x10/0x10 ? __kasan_check_write+0x18/0x30 ? alloc_fd+0xf4/0x330 do_sys_openat2+0x122/0x160 ? __pfx_do_sys_openat2+0x10/0x10 __x64_sys_openat+0xef/0x170 ? __pfx___x64_sys_openat+0x10/0x10 do_syscall_64+0x60/0xd0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f00a703fd67 Code: 25 00 00 41 00 3d 00 00 41 00 74 37 64 8b 04 25 18 00 00 00 85 c0 75 5b 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 85 00 00 00 48 83 c4 68 5d 41 5c c3 0f 1f RSP: 002b:00007ffc088e30b0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 00007ffc088e3368 RCX: 00007f00a703fd67 RDX: 0000000000000941 RSI: 00007ffc088e48d7 RDI: 00000000ffffff9c RBP: 00007ffc088e48d7 R08: 0000000000000001 R09: 0000000000000000 R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000941 R13: 0000000000000000 R14: 00007ffc088e48d7 R15: 00007f00a7180040 </TASK> Allocated by task 181: kasan_save_stack+0x2f/0x60 kasan_set_track+0x29/0x40 kasan_save_alloc_info+0x25/0x40 __kasan_kmalloc+0xc5/0xd0 __kmalloc+0x66/0x160 ecryptfs_generate_key_packet_set+0x6d2/0xde0 ecryptfs_write_metadata+0x30a/0x550 ecryptfs_initialize_file+0x77/0x150 ecryptfs_create+0x1c2/0x2f0 path_openat+0x17cf/0x1ba0 do_filp_open+0x15e/0x290 do_sys_openat2+0x122/0x160 __x64_sys_openat+0xef/0x170 do_syscall_64+0x60/0xd0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 |
| CVE-2024-38577 | In the Linux kernel, the following vulnerability has been resolved: rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow There is a possibility of buffer overflow in show_rcu_tasks_trace_gp_kthread() if counters, passed to sprintf() are huge. Counter numbers, needed for this are unrealistically high, but buffer overflow is still possible. Use snprintf() with buffer size instead of sprintf(). Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-38576 | In the Linux kernel, the following vulnerability has been resolved: rcu: Fix buffer overflow in print_cpu_stall_info() The rcuc-starvation output from print_cpu_stall_info() might overflow the buffer if there is a huge difference in jiffies difference. The situation might seem improbable, but computers sometimes get very confused about time, which can result in full-sized integers, and, in this case, buffer overflow. Also, the unsigned jiffies difference is printed using %ld, which is normally for signed integers. This is intentional for debugging purposes, but it is not obvious from the code. This commit therefore changes sprintf() to snprintf() and adds a clarifying comment about intention of %ld format. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-38575 | In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: pcie: handle randbuf allocation failure The kzalloc() in brcmf_pcie_download_fw_nvram() will return null if the physical memory has run out. As a result, if we use get_random_bytes() to generate random bytes in the randbuf, the null pointer dereference bug will happen. In order to prevent allocation failure, this patch adds a separate function using buffer on kernel stack to generate random bytes in the randbuf, which could prevent the kernel stack from overflow. |
| CVE-2024-38574 | In the Linux kernel, the following vulnerability has been resolved: libbpf: Prevent null-pointer dereference when prog to load has no BTF In bpf_objec_load_prog(), there's no guarantee that obj->btf is non-NULL when passing it to btf__fd(), and this function does not perform any check before dereferencing its argument (as bpf_object__btf_fd() used to do). As a consequence, we get segmentation fault errors in bpftool (for example) when trying to load programs that come without BTF information. v2: Keep btf__fd() in the fix instead of reverting to bpf_object__btf_fd(). |
| CVE-2024-38573 | In the Linux kernel, the following vulnerability has been resolved: cppc_cpufreq: Fix possible null pointer dereference cppc_cpufreq_get_rate() and hisi_cppc_cpufreq_get_rate() can be called from different places with various parameters. So cpufreq_cpu_get() can return null as 'policy' in some circumstances. Fix this bug by adding null return check. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-38572 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix out-of-bound access of qmi_invoke_handler() Currently, there is no terminator entry for ath12k_qmi_msg_handlers hence facing below KASAN warning, ================================================================== BUG: KASAN: global-out-of-bounds in qmi_invoke_handler+0xa4/0x148 Read of size 8 at addr ffffffd00a6428d8 by task kworker/u8:2/1273 CPU: 0 PID: 1273 Comm: kworker/u8:2 Not tainted 5.4.213 #0 Workqueue: qmi_msg_handler qmi_data_ready_work Call trace: dump_backtrace+0x0/0x20c show_stack+0x14/0x1c dump_stack+0xe0/0x138 print_address_description.isra.5+0x30/0x330 __kasan_report+0x16c/0x1bc kasan_report+0xc/0x14 __asan_load8+0xa8/0xb0 qmi_invoke_handler+0xa4/0x148 qmi_handle_message+0x18c/0x1bc qmi_data_ready_work+0x4ec/0x528 process_one_work+0x2c0/0x440 worker_thread+0x324/0x4b8 kthread+0x210/0x228 ret_from_fork+0x10/0x18 The address belongs to the variable: ath12k_mac_mon_status_filter_default+0x4bd8/0xfffffffffffe2300 [ath12k] [...] ================================================================== Add a dummy terminator entry at the end to assist the qmi_invoke_handler() in traversing up to the terminator entry without accessing an out-of-boundary index. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 |
| CVE-2024-38571 | In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/tsens: Fix null pointer dereference compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c) as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null pointer dereference (if DEBUG or DYNAMIC_DEBUG set). Fix this bug by adding null pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-38570 | In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix potential glock use-after-free on unmount When a DLM lockspace is released and there ares still locks in that lockspace, DLM will unlock those locks automatically. Commit fb6791d100d1b started exploiting this behavior to speed up filesystem unmount: gfs2 would simply free glocks it didn't want to unlock and then release the lockspace. This didn't take the bast callbacks for asynchronous lock contention notifications into account, which remain active until until a lock is unlocked or its lockspace is released. To prevent those callbacks from accessing deallocated objects, put the glocks that should not be unlocked on the sd_dead_glocks list, release the lockspace, and only then free those glocks. As an additional measure, ignore unexpected ast and bast callbacks if the receiving glock is dead. |
| CVE-2024-38569 | In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group The perf tool allows users to create event groups through following cmd [1], but the driver does not check whether the array index is out of bounds when writing data to the event_group array. If the number of events in an event_group is greater than HISI_PCIE_MAX_COUNTERS, the memory write overflow of event_group array occurs. Add array index check to fix the possible array out of bounds violation, and return directly when write new events are written to array bounds. There are 9 different events in an event_group. [1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}' |
| CVE-2024-38568 | In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group The perf tool allows users to create event groups through following cmd [1], but the driver does not check whether the array index is out of bounds when writing data to the event_group array. If the number of events in an event_group is greater than HNS3_PMU_MAX_HW_EVENTS, the memory write overflow of event_group array occurs. Add array index check to fix the possible array out of bounds violation, and return directly when write new events are written to array bounds. There are 9 different events in an event_group. [1] perf stat -e '{pmu/event1/, ... ,pmu/event9/} |
| CVE-2024-38567 | In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: add a proper sanity check for endpoints Syzkaller reports [1] hitting a warning which is caused by presence of a wrong endpoint type at the URB sumbitting stage. While there was a check for a specific 4th endpoint, since it can switch types between bulk and interrupt, other endpoints are trusted implicitly. Similar warning is triggered in a couple of other syzbot issues [2]. Fix the issue by doing a comprehensive check of all endpoints taking into account difference between high- and full-speed configuration. [1] Syzkaller report: ... WARNING: CPU: 0 PID: 4721 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> carl9170_usb_send_rx_irq_urb+0x273/0x340 drivers/net/wireless/ath/carl9170/usb.c:504 carl9170_usb_init_device drivers/net/wireless/ath/carl9170/usb.c:939 [inline] carl9170_usb_firmware_finish drivers/net/wireless/ath/carl9170/usb.c:999 [inline] carl9170_usb_firmware_step2+0x175/0x240 drivers/net/wireless/ath/carl9170/usb.c:1028 request_firmware_work_func+0x130/0x240 drivers/base/firmware_loader/main.c:1107 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> [2] Related syzkaller crashes: |
| CVE-2024-38566 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix verifier assumptions about socket->sk The verifier assumes that 'sk' field in 'struct socket' is valid and non-NULL when 'socket' pointer itself is trusted and non-NULL. That may not be the case when socket was just created and passed to LSM socket_accept hook. Fix this verifier assumption and adjust tests. |
| CVE-2024-38565 | In the Linux kernel, the following vulnerability has been resolved: wifi: ar5523: enable proper endpoint verification Syzkaller reports [1] hitting a warning about an endpoint in use not having an expected type to it. Fix the issue by checking for the existence of all proper endpoints with their according types intact. Sadly, this patch has not been tested on real hardware. [1] Syzkaller report: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 3643 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> ar5523_cmd+0x41b/0x780 drivers/net/wireless/ath/ar5523/ar5523.c:275 ar5523_cmd_read drivers/net/wireless/ath/ar5523/ar5523.c:302 [inline] ar5523_host_available drivers/net/wireless/ath/ar5523/ar5523.c:1376 [inline] ar5523_probe+0x14b0/0x1d10 drivers/net/wireless/ath/ar5523/ar5523.c:1655 usb_probe_interface+0x30f/0x7f0 drivers/usb/core/driver.c:396 call_driver_probe drivers/base/dd.c:560 [inline] really_probe+0x249/0xb90 drivers/base/dd.c:639 __driver_probe_device+0x1df/0x4d0 drivers/base/dd.c:778 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:808 __device_attach_driver+0x1d4/0x2e0 drivers/base/dd.c:936 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:427 __device_attach+0x1e4/0x530 drivers/base/dd.c:1008 bus_probe_device+0x1e8/0x2a0 drivers/base/bus.c:487 device_add+0xbd9/0x1e90 drivers/base/core.c:3517 usb_set_configuration+0x101d/0x1900 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0xbe/0x100 drivers/usb/core/generic.c:238 usb_probe_device+0xd8/0x2c0 drivers/usb/core/driver.c:293 call_driver_probe drivers/base/dd.c:560 [inline] really_probe+0x249/0xb90 drivers/base/dd.c:639 __driver_probe_device+0x1df/0x4d0 drivers/base/dd.c:778 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:808 __device_attach_driver+0x1d4/0x2e0 drivers/base/dd.c:936 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:427 __device_attach+0x1e4/0x530 drivers/base/dd.c:1008 bus_probe_device+0x1e8/0x2a0 drivers/base/bus.c:487 device_add+0xbd9/0x1e90 drivers/base/core.c:3517 usb_new_device.cold+0x685/0x10ad drivers/usb/core/hub.c:2573 hub_port_connect drivers/usb/core/hub.c:5353 [inline] hub_port_connect_change drivers/usb/core/hub.c:5497 [inline] port_event drivers/usb/core/hub.c:5653 [inline] hub_event+0x26cb/0x45d0 drivers/usb/core/hub.c:5735 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> |
| CVE-2024-38564 | In the Linux kernel, the following vulnerability has been resolved: bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE bpf_prog_attach uses attach_type_to_prog_type to enforce proper attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses bpf_prog_get and relies on bpf_prog_attach_check_attach_type to properly verify prog_type <> attach_type association. Add missing attach_type enforcement for the link_create case. Otherwise, it's currently possible to attach cgroup_skb prog types to other cgroup hooks. |
| CVE-2024-38563 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix potential memory leakage when reading chip temperature Without this commit, reading chip temperature will cause memory leakage. |
| CVE-2024-38562 | In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: Avoid address calculations via out of bounds array indexing Before request->channels[] can be used, request->n_channels must be set. Additionally, address calculations for memory after the "channels" array need to be calculated from the allocation base ("request") rather than via the first "out of bounds" index of "channels", otherwise run-time bounds checking will throw a warning. |
| CVE-2024-38561 | In the Linux kernel, the following vulnerability has been resolved: kunit: Fix kthread reference There is a race condition when a kthread finishes after the deadline and before the call to kthread_stop(), which may lead to use after free. |
| CVE-2024-38560 | In the Linux kernel, the following vulnerability has been resolved: scsi: bfa: Ensure the copied buf is NUL terminated Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user. |
| CVE-2024-38559 | In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Ensure the copied buf is NUL terminated Currently, we allocate a count-sized kernel buffer and copy count from userspace to that buffer. Later, we use kstrtouint on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using kstrtouint. Fix this issue by using memdup_user_nul instead of memdup_user. |
| CVE-2024-38558 | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix overwriting ct original tuple for ICMPv6 OVS_PACKET_CMD_EXECUTE has 3 main attributes: - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. - OVS_PACKET_ATTR_PACKET - Binary packet content. - OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet. OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure with the metadata like conntrack state, input port, recirculation id, etc. Then the packet itself gets parsed to populate the rest of the keys from the packet headers. Whenever the packet parsing code starts parsing the ICMPv6 header, it first zeroes out fields in the key corresponding to Neighbor Discovery information even if it is not an ND packet. It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares the space between 'nd' and 'ct_orig' that holds the original tuple conntrack metadata parsed from the OVS_PACKET_ATTR_KEY. ND packets should not normally have conntrack state, so it's fine to share the space, but normal ICMPv6 Echo packets or maybe other types of ICMPv6 can have the state attached and it should not be overwritten. The issue results in all but the last 4 bytes of the destination address being wiped from the original conntrack tuple leading to incorrect packet matching and potentially executing wrong actions in case this packet recirculates within the datapath or goes back to userspace. ND fields should not be accessed in non-ND packets, so not clearing them should be fine. Executing memset() only for actual ND packets to avoid the issue. Initializing the whole thing before parsing is needed because ND packet may not contain all the options. The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't affect packets entering OVS datapath from network interfaces, because in this case CT metadata is populated from skb after the packet is already parsed. |
| CVE-2024-38557 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Reload only IB representors upon lag disable/enable On lag disable, the bond IB device along with all of its representors are destroyed, and then the slaves' representors get reloaded. In case the slave IB representor load fails, the eswitch error flow unloads all representors, including ethernet representors, where the netdevs get detached and removed from lag bond. Such flow is inaccurate as the lag driver is not responsible for loading/unloading ethernet representors. Furthermore, the flow described above begins by holding lag lock to prevent bond changes during disable flow. However, when reaching the ethernet representors detachment from lag, the lag lock is required again, triggering the following deadlock: Call trace: __switch_to+0xf4/0x148 __schedule+0x2c8/0x7d0 schedule+0x50/0xe0 schedule_preempt_disabled+0x18/0x28 __mutex_lock.isra.13+0x2b8/0x570 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x4c/0x68 mlx5_lag_remove_netdev+0x3c/0x1a0 [mlx5_core] mlx5e_uplink_rep_disable+0x70/0xa0 [mlx5_core] mlx5e_detach_netdev+0x6c/0xb0 [mlx5_core] mlx5e_netdev_change_profile+0x44/0x138 [mlx5_core] mlx5e_netdev_attach_nic_profile+0x28/0x38 [mlx5_core] mlx5e_vport_rep_unload+0x184/0x1b8 [mlx5_core] mlx5_esw_offloads_rep_load+0xd8/0xe0 [mlx5_core] mlx5_eswitch_reload_reps+0x74/0xd0 [mlx5_core] mlx5_disable_lag+0x130/0x138 [mlx5_core] mlx5_lag_disable_change+0x6c/0x70 [mlx5_core] // hold ldev->lock mlx5_devlink_eswitch_mode_set+0xc0/0x410 [mlx5_core] devlink_nl_cmd_eswitch_set_doit+0xdc/0x180 genl_family_rcv_msg_doit.isra.17+0xe8/0x138 genl_rcv_msg+0xe4/0x220 netlink_rcv_skb+0x44/0x108 genl_rcv+0x40/0x58 netlink_unicast+0x198/0x268 netlink_sendmsg+0x1d4/0x418 sock_sendmsg+0x54/0x60 __sys_sendto+0xf4/0x120 __arm64_sys_sendto+0x30/0x40 el0_svc_common+0x8c/0x120 do_el0_svc+0x30/0xa0 el0_svc+0x20/0x30 el0_sync_handler+0x90/0xb8 el0_sync+0x160/0x180 Thus, upon lag enable/disable, load and unload only the IB representors of the slaves preventing the deadlock mentioned above. While at it, refactor the mlx5_esw_offloads_rep_load() function to have a static helper method for its internal logic, in symmetry with the representor unload design. |
| CVE-2024-38556 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Add a timeout to acquire the command queue semaphore Prevent forced completion handling on an entry that has not yet been assigned an index, causing an out of bounds access on idx = -22. Instead of waiting indefinitely for the sem, blocking flow now waits for index to be allocated or a sem acquisition timeout before beginning the timer for FW completion. Kernel log example: mlx5_core 0000:06:00.0: wait_func_handle_exec_timeout:1128:(pid 185911): cmd[-22]: CREATE_UCTX(0xa04) No done completion |
| CVE-2024-38555 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Discard command completions in internal error Fix use after free when FW completion arrives while device is in internal error state. Avoid calling completion handler in this case, since the device will flush the command interface and trigger all completions manually. Kernel log: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0xd8/0xe0 ... Call Trace: <IRQ> ? __warn+0x79/0x120 ? refcount_warn_saturate+0xd8/0xe0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0xd8/0xe0 cmd_ent_put+0x13b/0x160 [mlx5_core] mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core] cmd_comp_notifier+0x1f/0x30 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 mlx5_eq_async_int+0xf6/0x290 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x4b/0x160 handle_irq_event+0x2e/0x80 handle_edge_irq+0x98/0x230 __common_interrupt+0x3b/0xa0 common_interrupt+0x7b/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 |
| CVE-2024-38554 | In the Linux kernel, the following vulnerability has been resolved: ax25: Fix reference count leak issue of net_device There is a reference count leak issue of the object "net_device" in ax25_dev_device_down(). When the ax25 device is shutting down, the ax25_dev_device_down() drops the reference count of net_device one or zero times depending on if we goto unlock_put or not, which will cause memory leak. In order to solve the above issue, decrease the reference count of net_device after dev->ax25_ptr is set to null. |
| CVE-2024-38553 | In the Linux kernel, the following vulnerability has been resolved: net: fec: remove .ndo_poll_controller to avoid deadlocks There is a deadlock issue found in sungem driver, please refer to the commit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoid deadlocks"). The root cause of the issue is that netpoll is in atomic context and disable_irq() is called by .ndo_poll_controller interface of sungem driver, however, disable_irq() might sleep. After analyzing the implementation of fec_poll_controller(), the fec driver should have the same issue. Due to the fec driver uses NAPI for TX completions, the .ndo_poll_controller is unnecessary to be implemented in the fec driver, so fec_poll_controller() can be safely removed. |
| CVE-2024-38552 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential index out of bounds in color transformation function Fixes index out of bounds issue in the color transformation function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, an error message is logged and the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max |
| CVE-2024-38551 | In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Assign dummy when codec not specified for a DAI link MediaTek sound card drivers are checking whether a DAI link is present and used on a board to assign the correct parameters and this is done by checking the codec DAI names at probe time. If no real codec is present, assign the dummy codec to the DAI link to avoid NULL pointer during string comparison. |
| CVE-2024-38550 | In the Linux kernel, the following vulnerability has been resolved: ASoC: kirkwood: Fix potential NULL dereference In kirkwood_dma_hw_params() mv_mbus_dram_info() returns NULL if CONFIG_PLAT_ORION macro is not defined. Fix this bug by adding NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-38549 | In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add 0 size check to mtk_drm_gem_obj Add a check to mtk_drm_gem_init if we attempt to allocate a GEM object of 0 bytes. Currently, no such check exists and the kernel will panic if a userspace application attempts to allocate a 0x0 GBM buffer. Tested by attempting to allocate a 0x0 GBM buffer on an MT8188 and verifying that we now return EINVAL. |
| CVE-2024-38548 | In the Linux kernel, the following vulnerability has been resolved: drm: bridge: cdns-mhdp8546: Fix possible null pointer dereference In cdns_mhdp_atomic_enable(), the return value of drm_mode_duplicate() is assigned to mhdp_state->current_mode, and there is a dereference of it in drm_mode_set_name(), which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Fix this bug add a check of mhdp_state->current_mode. |
| CVE-2024-38547 | In the Linux kernel, the following vulnerability has been resolved: media: atomisp: ssh_css: Fix a null-pointer dereference in load_video_binaries The allocation failure of mycs->yuv_scaler_binary in load_video_binaries() is followed with a dereference of mycs->yuv_scaler_binary after the following call chain: sh_css_pipe_load_binaries() |-> load_video_binaries(mycs->yuv_scaler_binary == NULL) | |-> sh_css_pipe_unload_binaries() |-> unload_video_binaries() In unload_video_binaries(), it calls to ia_css_binary_unload with argument &pipe->pipe_settings.video.yuv_scaler_binary[i], which refers to the same memory slot as mycs->yuv_scaler_binary. Thus, a null-pointer dereference is triggered. |
| CVE-2024-38546 | In the Linux kernel, the following vulnerability has been resolved: drm: vc4: Fix possible null pointer dereference In vc4_hdmi_audio_init() of_get_address() may return NULL which is later dereferenced. Fix this bug by adding NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-38545 | In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix UAF for cq async event The refcount of CQ is not protected by locks. When CQ asynchronous events and CQ destruction are concurrent, CQ may have been released, which will cause UAF. Use the xa_lock() to protect the CQ refcount. |
| CVE-2024-38544 | In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix seg fault in rxe_comp_queue_pkt In rxe_comp_queue_pkt() an incoming response packet skb is enqueued to the resp_pkts queue and then a decision is made whether to run the completer task inline or schedule it. Finally the skb is dereferenced to bump a 'hw' performance counter. This is wrong because if the completer task is already running in a separate thread it may have already processed the skb and freed it which can cause a seg fault. This has been observed infrequently in testing at high scale. This patch fixes this by changing the order of enqueuing the packet until after the counter is accessed. |
| CVE-2024-38543 | In the Linux kernel, the following vulnerability has been resolved: lib/test_hmm.c: handle src_pfns and dst_pfns allocation failure The kcalloc() in dmirror_device_evict_chunk() will return null if the physical memory has run out. As a result, if src_pfns or dst_pfns is dereferenced, the null pointer dereference bug will happen. Moreover, the device is going away. If the kcalloc() fails, the pages mapping a chunk could not be evicted. So add a __GFP_NOFAIL flag in kcalloc(). Finally, as there is no need to have physically contiguous memory, Switch kcalloc() to kvcalloc() in order to avoid failing allocations. |
| CVE-2024-38542 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: boundary check before installing cq callbacks Add a boundary check inside mana_ib_install_cq_cb to prevent index overflow. |
| CVE-2024-38541 | In the Linux kernel, the following vulnerability has been resolved: of: module: add buffer overflow check in of_modalias() In of_modalias(), if the buffer happens to be too small even for the 1st snprintf() call, the len parameter will become negative and str parameter (if not NULL initially) will point beyond the buffer's end. Add the buffer overflow check after the 1st snprintf() call and fix such check after the strlen() call (accounting for the terminating NUL char). |
| CVE-2024-38540 | In the Linux kernel, the following vulnerability has been resolved: bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq Undefined behavior is triggered when bnxt_qplib_alloc_init_hwq is called with hwq_attr->aux_depth != 0 and hwq_attr->aux_stride == 0. In that case, "roundup_pow_of_two(hwq_attr->aux_stride)" gets called. roundup_pow_of_two is documented as undefined for 0. Fix it in the one caller that had this combination. The undefined behavior was detected by UBSAN: UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 24 PID: 1075 Comm: (udev-worker) Not tainted 6.9.0-rc6+ #4 Hardware name: Abacus electric, s.r.o. - [email protected] Super Server/H12SSW-iN, BIOS 2.7 10/25/2023 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x30 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xec __roundup_pow_of_two+0x25/0x35 [bnxt_re] bnxt_qplib_alloc_init_hwq+0xa1/0x470 [bnxt_re] bnxt_qplib_create_qp+0x19e/0x840 [bnxt_re] bnxt_re_create_qp+0x9b1/0xcd0 [bnxt_re] ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kmalloc+0x1b6/0x4f0 ? create_qp.part.0+0x128/0x1c0 [ib_core] ? __pfx_bnxt_re_create_qp+0x10/0x10 [bnxt_re] create_qp.part.0+0x128/0x1c0 [ib_core] ib_create_qp_kernel+0x50/0xd0 [ib_core] create_mad_qp+0x8e/0xe0 [ib_core] ? __pfx_qp_event_handler+0x10/0x10 [ib_core] ib_mad_init_device+0x2be/0x680 [ib_core] add_client_context+0x10d/0x1a0 [ib_core] enable_device_and_get+0xe0/0x1d0 [ib_core] ib_register_device+0x53c/0x630 [ib_core] ? srso_alias_return_thunk+0x5/0xfbef5 bnxt_re_probe+0xbd8/0xe50 [bnxt_re] ? __pfx_bnxt_re_probe+0x10/0x10 [bnxt_re] auxiliary_bus_probe+0x49/0x80 ? driver_sysfs_add+0x57/0xc0 really_probe+0xde/0x340 ? pm_runtime_barrier+0x54/0x90 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8f/0xe0 bus_add_driver+0x146/0x220 driver_register+0x72/0xd0 __auxiliary_driver_register+0x6e/0xd0 ? __pfx_bnxt_re_mod_init+0x10/0x10 [bnxt_re] bnxt_re_mod_init+0x3e/0xff0 [bnxt_re] ? __pfx_bnxt_re_mod_init+0x10/0x10 [bnxt_re] do_one_initcall+0x5b/0x310 do_init_module+0x90/0x250 init_module_from_file+0x86/0xc0 idempotent_init_module+0x121/0x2b0 __x64_sys_finit_module+0x5e/0xb0 do_syscall_64+0x82/0x160 ? srso_alias_return_thunk+0x5/0xfbef5 ? syscall_exit_to_user_mode_prepare+0x149/0x170 ? srso_alias_return_thunk+0x5/0xfbef5 ? syscall_exit_to_user_mode+0x75/0x230 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_syscall_64+0x8e/0x160 ? srso_alias_return_thunk+0x5/0xfbef5 ? __count_memcg_events+0x69/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 ? count_memcg_events.constprop.0+0x1a/0x30 ? srso_alias_return_thunk+0x5/0xfbef5 ? handle_mm_fault+0x1f0/0x300 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_user_addr_fault+0x34e/0x640 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4e5132821d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e3 db 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffca9c906a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000563ec8a8f130 RCX: 00007f4e5132821d RDX: 0000000000000000 RSI: 00007f4e518fa07d RDI: 000000000000003b RBP: 00007ffca9c90760 R08: 00007f4e513f6b20 R09: 00007ffca9c906f0 R10: 0000563ec8a8faa0 R11: 0000000000000246 R12: 00007f4e518fa07d R13: 0000000000020000 R14: 0000563ec8409e90 R15: 0000563ec8a8fa60 </TASK> ---[ end trace ]--- |
| CVE-2024-38539 | In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix kmemleak in rdma_core observed during blktests nvme/rdma use siw When running blktests nvme/rdma, the following kmemleak issue will appear. kmemleak: Kernel memory leak detector initialized (mempool available:36041) kmemleak: Automatic memory scanning thread started kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 8 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 17 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 4 new suspected memory leaks (see /sys/kernel/debug/kmemleak) unreferenced object 0xffff88855da53400 (size 192): comm "rdma", pid 10630, jiffies 4296575922 hex dump (first 32 bytes): 37 00 00 00 00 00 00 00 c0 ff ff ff 1f 00 00 00 7............... 10 34 a5 5d 85 88 ff ff 10 34 a5 5d 85 88 ff ff .4.].....4.].... backtrace (crc 47f66721): [<ffffffff911251bd>] kmalloc_trace+0x30d/0x3b0 [<ffffffffc2640ff7>] alloc_gid_entry+0x47/0x380 [ib_core] [<ffffffffc2642206>] add_modify_gid+0x166/0x930 [ib_core] [<ffffffffc2643468>] ib_cache_update.part.0+0x6d8/0x910 [ib_core] [<ffffffffc2644e1a>] ib_cache_setup_one+0x24a/0x350 [ib_core] [<ffffffffc263949e>] ib_register_device+0x9e/0x3a0 [ib_core] [<ffffffffc2a3d389>] 0xffffffffc2a3d389 [<ffffffffc2688cd8>] nldev_newlink+0x2b8/0x520 [ib_core] [<ffffffffc2645fe3>] rdma_nl_rcv_msg+0x2c3/0x520 [ib_core] [<ffffffffc264648c>] rdma_nl_rcv_skb.constprop.0.isra.0+0x23c/0x3a0 [ib_core] [<ffffffff9270e7b5>] netlink_unicast+0x445/0x710 [<ffffffff9270f1f1>] netlink_sendmsg+0x761/0xc40 [<ffffffff9249db29>] __sys_sendto+0x3a9/0x420 [<ffffffff9249dc8c>] __x64_sys_sendto+0xdc/0x1b0 [<ffffffff92db0ad3>] do_syscall_64+0x93/0x180 [<ffffffff92e00126>] entry_SYSCALL_64_after_hwframe+0x71/0x79 The root cause: rdma_put_gid_attr is not called when sgid_attr is set to ERR_PTR(-ENODEV). |
| CVE-2024-38538 | In the Linux kernel, the following vulnerability has been resolved: net: bridge: xmit: make sure we have at least eth header len bytes syzbot triggered an uninit value[1] error in bridge device's xmit path by sending a short (less than ETH_HLEN bytes) skb. To fix it check if we can actually pull that amount instead of assuming. Tested with dropwatch: drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3) origin: software timestamp: Mon May 13 11:31:53 2024 778214037 nsec protocol: 0x88a8 length: 2 original length: 2 drop reason: PKT_TOO_SMALL [1] BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] __bpf_tx_skb net/core/filter.c:2136 [inline] __bpf_redirect_common net/core/filter.c:2180 [inline] __bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187 ____bpf_clone_redirect net/core/filter.c:2460 [inline] bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline] __bpf_prog_run include/linux/filter.h:657 [inline] bpf_prog_run include/linux/filter.h:664 [inline] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [inline] __se_sys_bpf kernel/bpf/syscall.c:5765 [inline] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| CVE-2024-38394 | ** DISPUTED ** Mismatches in interpreting USB authorization policy between GNOME Settings Daemon (GSD) through 46.0 and the Linux kernel's underlying device matching logic allow a physically proximate attacker to access some unintended Linux kernel USB functionality, such as USB device-specific kernel modules and filesystem implementations. NOTE: the GSD supplier indicates that consideration of a mitigation for this within GSD would be in the context of "a new feature, not a CVE." |
| CVE-2024-38390 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails Calling a6xx_destroy() before adreno_gpu_init() leads to a null pointer dereference on: msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL); as gpu->pdev is only assigned in: a6xx_gpu_init() |_ adreno_gpu_init |_ msm_gpu_init() Instead of relying on handwavy null checks down the cleanup chain, explicitly de-allocate the LLC data and free a6xx_gpu instead. Patchwork: https://patchwork.freedesktop.org/patch/588919/ |
| CVE-2024-38388 | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs_dsp_ctl: Use private_free for control cleanup Use the control private_free callback to free the associated data block. This ensures that the memory won't leak, whatever way the control gets destroyed. The original implementation didn't actually remove the ALSA controls in hda_cs_dsp_control_remove(). It only freed the internal tracking structure. This meant it was possible to remove/unload the amp driver while leaving its ALSA controls still present in the soundcard. Obviously attempting to access them could cause segfaults or at least dereferencing stale pointers. |
| CVE-2024-38385 | In the Linux kernel, the following vulnerability has been resolved: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() irq_find_at_or_after() dereferences the interrupt descriptor which is returned by mt_find() while neither holding sparse_irq_lock nor RCU read lock, which means the descriptor can be freed between mt_find() and the dereference: CPU0 CPU1 desc = mt_find() delayed_free_desc(desc) irq_desc_get_irq(desc) The use-after-free is reported by KASAN: Call trace: irq_get_next_irq+0x58/0x84 show_stat+0x638/0x824 seq_read_iter+0x158/0x4ec proc_reg_read_iter+0x94/0x12c vfs_read+0x1e0/0x2c8 Freed by task 4471: slab_free_freelist_hook+0x174/0x1e0 __kmem_cache_free+0xa4/0x1dc kfree+0x64/0x128 irq_kobj_release+0x28/0x3c kobject_put+0xcc/0x1e0 delayed_free_desc+0x14/0x2c rcu_do_batch+0x214/0x720 Guard the access with a RCU read lock section. |
| CVE-2024-38384 | In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix list corruption from reorder of WRITE ->lqueued __blkcg_rstat_flush() can be run anytime, especially when blk_cgroup_bio_start is being executed. If WRITE of `->lqueued` is re-ordered with READ of 'bisc->lnode.next' in the loop of __blkcg_rstat_flush(), `next_bisc` can be assigned with one stat instance being added in blk_cgroup_bio_start(), then the local list in __blkcg_rstat_flush() could be corrupted. Fix the issue by adding one barrier. |
| CVE-2024-38381 | In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix uninit-value in nci_rx_work syzbot reported the following uninit-value access issue [1] nci_rx_work() parses received packet from ndev->rx_q. It should be validated header size, payload size and total packet size before processing the packet. If an invalid packet is detected, it should be silently discarded. |
| CVE-2024-38306 | In the Linux kernel, the following vulnerability has been resolved: btrfs: protect folio::private when attaching extent buffer folios [BUG] Since v6.8 there are rare kernel crashes reported by various people, the common factor is bad page status error messages like this: BUG: Bad page state in process kswapd0 pfn:d6e840 page: refcount:0 mapcount:0 mapping:000000007512f4f2 index:0x2796c2c7c pfn:0xd6e840 aops:btree_aops ino:1 flags: 0x17ffffe0000008(uptodate|node=0|zone=2|lastcpupid=0x3fffff) page_type: 0xffffffff() raw: 0017ffffe0000008 dead000000000100 dead000000000122 ffff88826d0be4c0 raw: 00000002796c2c7c 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: non-NULL mapping [CAUSE] Commit 09e6cef19c9f ("btrfs: refactor alloc_extent_buffer() to allocate-then-attach method") changes the sequence when allocating a new extent buffer. Previously we always called grab_extent_buffer() under mapping->i_private_lock, to ensure the safety on modification on folio::private (which is a pointer to extent buffer for regular sectorsize). This can lead to the following race: Thread A is trying to allocate an extent buffer at bytenr X, with 4 4K pages, meanwhile thread B is trying to release the page at X + 4K (the second page of the extent buffer at X). Thread A | Thread B -----------------------------------+------------------------------------- | btree_release_folio() | | This is for the page at X + 4K, | | Not page X. | | alloc_extent_buffer() | |- release_extent_buffer() |- filemap_add_folio() for the | | |- atomic_dec_and_test(eb->refs) | page at bytenr X (the first | | | | page). | | | | Which returned -EEXIST. | | | | | | | |- filemap_lock_folio() | | | | Returned the first page locked. | | | | | | | |- grab_extent_buffer() | | | | |- atomic_inc_not_zero() | | | | | Returned false | | | | |- folio_detach_private() | | |- folio_detach_private() for X | |- folio_test_private() | | |- folio_test_private() | Returned true | | | Returned true |- folio_put() | |- folio_put() Now there are two puts on the same folio at folio X, leading to refcount underflow of the folio X, and eventually causing the BUG_ON() on the page->mapping. The condition is not that easy to hit: - The release must be triggered for the middle page of an eb If the release is on the same first page of an eb, page lock would kick in and prevent the race. - folio_detach_private() has a very small race window It's only between folio_test_private() and folio_clear_private(). That's exactly when mapping->i_private_lock is used to prevent such race, and commit 09e6cef19c9f ("btrfs: refactor alloc_extent_buffer() to allocate-then-attach method") screwed that up. At that time, I thought the page lock would kick in as filemap_release_folio() also requires the page to be locked, but forgot the filemap_release_folio() only locks one page, not all pages of an extent buffer. [FIX] Move all the code requiring i_private_lock into attach_eb_folio_to_filemap(), so that everything is done with proper lock protection. Furthermore to prevent future problems, add an extra lockdep_assert_locked() to ensure we're holding the proper lock. To reproducer that is able to hit the race (takes a few minutes with instrumented code inserting delays to alloc_extent_buffer()): #!/bin/sh drop_caches () { while(true); do echo 3 > /proc/sys/vm/drop_caches echo 1 > /proc/sys/vm/compact_memory done } run_tar () { while(true); do for x in `seq 1 80` ; do tar cf /dev/zero /mnt > /dev/null & done wait done } mkfs.btrfs -f -d single -m single ---truncated--- |
| CVE-2024-37356 | In the Linux kernel, the following vulnerability has been resolved: tcp: Fix shift-out-of-bounds in dctcp_update_alpha(). In dctcp_update_alpha(), we use a module parameter dctcp_shift_g as follows: alpha -= min_not_zero(alpha, alpha >> dctcp_shift_g); ... delivered_ce <<= (10 - dctcp_shift_g); It seems syzkaller started fuzzing module parameters and triggered shift-out-of-bounds [0] by setting 100 to dctcp_shift_g: memcpy((void*)0x20000080, "/sys/module/tcp_dctcp/parameters/dctcp_shift_g\000", 47); res = syscall(__NR_openat, /*fd=*/0xffffffffffffff9cul, /*file=*/0x20000080ul, /*flags=*/2ul, /*mode=*/0ul); memcpy((void*)0x20000000, "100\000", 4); syscall(__NR_write, /*fd=*/r[0], /*val=*/0x20000000ul, /*len=*/4ul); Let's limit the max value of dctcp_shift_g by param_set_uint_minmax(). With this patch: # echo 10 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g # cat /sys/module/tcp_dctcp/parameters/dctcp_shift_g 10 # echo 11 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g -bash: echo: write error: Invalid argument [0]: UBSAN: shift-out-of-bounds in net/ipv4/tcp_dctcp.c:143:12 shift exponent 100 is too large for 32-bit type 'u32' (aka 'unsigned int') CPU: 0 PID: 8083 Comm: syz-executor345 Not tainted 6.9.0-05151-g1b294a1f3561 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x300 lib/dump_stack.c:114 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x346/0x3a0 lib/ubsan.c:468 dctcp_update_alpha+0x540/0x570 net/ipv4/tcp_dctcp.c:143 tcp_in_ack_event net/ipv4/tcp_input.c:3802 [inline] tcp_ack+0x17b1/0x3bc0 net/ipv4/tcp_input.c:3948 tcp_rcv_state_process+0x57a/0x2290 net/ipv4/tcp_input.c:6711 tcp_v4_do_rcv+0x764/0xc40 net/ipv4/tcp_ipv4.c:1937 sk_backlog_rcv include/net/sock.h:1106 [inline] __release_sock+0x20f/0x350 net/core/sock.c:2983 release_sock+0x61/0x1f0 net/core/sock.c:3549 mptcp_subflow_shutdown+0x3d0/0x620 net/mptcp/protocol.c:2907 mptcp_check_send_data_fin+0x225/0x410 net/mptcp/protocol.c:2976 __mptcp_close+0x238/0xad0 net/mptcp/protocol.c:3072 mptcp_close+0x2a/0x1a0 net/mptcp/protocol.c:3127 inet_release+0x190/0x1f0 net/ipv4/af_inet.c:437 __sock_release net/socket.c:659 [inline] sock_close+0xc0/0x240 net/socket.c:1421 __fput+0x41b/0x890 fs/file_table.c:422 task_work_run+0x23b/0x300 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x9c8/0x2540 kernel/exit.c:878 do_group_exit+0x201/0x2b0 kernel/exit.c:1027 __do_sys_exit_group kernel/exit.c:1038 [inline] __se_sys_exit_group kernel/exit.c:1036 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1036 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xe4/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x7f6c2b5005b6 Code: Unable to access opcode bytes at 0x7f6c2b50058c. RSP: 002b:00007ffe883eb948 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007f6c2b5862f0 RCX: 00007f6c2b5005b6 RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001 RBP: 0000000000000001 R08: 00000000000000e7 R09: ffffffffffffffc0 R10: 0000000000000006 R11: 0000000000000246 R12: 00007f6c2b5862f0 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 </TASK> |
| CVE-2024-37354 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix crash on racing fsync and size-extending write into prealloc We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of ---truncated--- |
| CVE-2024-37078 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential kernel bug due to lack of writeback flag waiting Destructive writes to a block device on which nilfs2 is mounted can cause a kernel bug in the folio/page writeback start routine or writeback end routine (__folio_start_writeback in the log below): kernel BUG at mm/page-writeback.c:3070! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI ... RIP: 0010:__folio_start_writeback+0xbaa/0x10e0 Code: 25 ff 0f 00 00 0f 84 18 01 00 00 e8 40 ca c6 ff e9 17 f6 ff ff e8 36 ca c6 ff 4c 89 f7 48 c7 c6 80 c0 12 84 e8 e7 b3 0f 00 90 <0f> 0b e8 1f ca c6 ff 4c 89 f7 48 c7 c6 a0 c6 12 84 e8 d0 b3 0f 00 ... Call Trace: <TASK> nilfs_segctor_do_construct+0x4654/0x69d0 [nilfs2] nilfs_segctor_construct+0x181/0x6b0 [nilfs2] nilfs_segctor_thread+0x548/0x11c0 [nilfs2] kthread+0x2f0/0x390 ret_from_fork+0x4b/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> This is because when the log writer starts a writeback for segment summary blocks or a super root block that use the backing device's page cache, it does not wait for the ongoing folio/page writeback, resulting in an inconsistent writeback state. Fix this issue by waiting for ongoing writebacks when putting folios/pages on the backing device into writeback state. |
| CVE-2024-37026 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Only use reserved BCS instances for usm migrate exec queue The GuC context scheduling queue is 2 entires deep, thus it is possible for a migration job to be stuck behind a fault if migration exec queue shares engines with user jobs. This can deadlock as the migrate exec queue is required to service page faults. Avoid deadlock by only using reserved BCS instances for usm migrate exec queue. (cherry picked from commit 04f4a70a183a688a60fe3882d6e4236ea02cfc67) |
| CVE-2024-37021 | In the Linux kernel, the following vulnerability has been resolved: fpga: manager: add owner module and take its refcount The current implementation of the fpga manager assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the manager if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_manager struct and use it to take the module's refcount. Modify the functions for registering the manager to take an additional owner module parameter and rename them to avoid conflicts. Use the old function names for helper macros that automatically set the module that registers the manager as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a manager without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga manager. Other changes: opportunistically move put_device() from __fpga_mgr_get() to fpga_mgr_get() and of_fpga_mgr_get() to improve code clarity since the manager device is taken in these functions. |
| CVE-2024-36979 | In the Linux kernel, the following vulnerability has been resolved: net: bridge: mst: fix vlan use-after-free syzbot reported a suspicious rcu usage[1] in bridge's mst code. While fixing it I noticed that nothing prevents a vlan to be freed while walking the list from the same path (br forward delay timer). Fix the rcu usage and also make sure we are not accessing freed memory by making br_mst_vlan_set_state use rcu read lock. [1] WARNING: suspicious RCU usage 6.9.0-rc6-syzkaller #0 Not tainted ----------------------------- net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage! ... stack backtrace: CPU: 1 PID: 8017 Comm: syz-executor.1 Not tainted 6.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nbp_vlan_group net/bridge/br_private.h:1599 [inline] br_mst_set_state+0x1ea/0x650 net/bridge/br_mst.c:105 br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47 br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1793 expire_timers kernel/time/timer.c:1844 [inline] __run_timers kernel/time/timer.c:2418 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2429 run_timer_base kernel/time/timer.c:2438 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2448 __do_softirq+0x2c6/0x980 kernel/softirq.c:554 invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf2/0x1c0 kernel/softirq.c:633 irq_exit_rcu+0x9/0x30 kernel/softirq.c:645 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 RIP: 0010:lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758 Code: 2b 00 74 08 4c 89 f7 e8 ba d1 84 00 f6 44 24 61 02 0f 85 85 01 00 00 41 f7 c7 00 02 00 00 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 25 00 00 00 00 00 43 c7 44 25 09 00 00 00 00 43 c7 44 25 RSP: 0018:ffffc90013657100 EFLAGS: 00000206 RAX: 0000000000000001 RBX: 1ffff920026cae2c RCX: 0000000000000001 RDX: dffffc0000000000 RSI: ffffffff8bcaca00 RDI: ffffffff8c1eaa60 RBP: ffffc90013657260 R08: ffffffff92efe507 R09: 1ffffffff25dfca0 R10: dffffc0000000000 R11: fffffbfff25dfca1 R12: 1ffff920026cae28 R13: dffffc0000000000 R14: ffffc90013657160 R15: 0000000000000246 |
| CVE-2024-36978 | In the Linux kernel, the following vulnerability has been resolved: net: sched: sch_multiq: fix possible OOB write in multiq_tune() q->bands will be assigned to qopt->bands to execute subsequent code logic after kmalloc. So the old q->bands should not be used in kmalloc. Otherwise, an out-of-bounds write will occur. |
| CVE-2024-36977 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: Wait unconditionally after issuing EndXfer command Currently all controller IP/revisions except DWC3_usb3 >= 310a wait 1ms unconditionally for ENDXFER completion when IOC is not set. This is because DWC_usb3 controller revisions >= 3.10a supports GUCTL2[14: Rst_actbitlater] bit which allows polling CMDACT bit to know whether ENDXFER command is completed. Consider a case where an IN request was queued, and parallelly soft_disconnect was called (due to ffs_epfile_release). This eventually calls stop_active_transfer with IOC cleared, hence send_gadget_ep_cmd() skips waiting for CMDACT cleared during EndXfer. For DWC3 controllers with revisions >= 310a, we don't forcefully wait for 1ms either, and we proceed by unmapping the requests. If ENDXFER didn't complete by this time, it leads to SMMU faults since the controller would still be accessing those requests. Fix this by ensuring ENDXFER completion by adding 1ms delay in __dwc3_stop_active_transfer() unconditionally. |
| CVE-2024-36976 | In the Linux kernel, the following vulnerability has been resolved: Revert "media: v4l2-ctrls: show all owned controls in log_status" This reverts commit 9801b5b28c6929139d6fceeee8d739cc67bb2739. This patch introduced a potential deadlock scenario: [Wed May 8 10:02:06 2024] Possible unsafe locking scenario: [Wed May 8 10:02:06 2024] CPU0 CPU1 [Wed May 8 10:02:06 2024] ---- ---- [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1620:(hdl_vid_cap)->_lock); [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1608:(hdl_user_vid)->_lock); [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1620:(hdl_vid_cap)->_lock); [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1608:(hdl_user_vid)->_lock); For now just revert. |
| CVE-2024-36975 | In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Do not use WARN when encode fails When asn1_encode_sequence() fails, WARN is not the correct solution. 1. asn1_encode_sequence() is not an internal function (located in lib/asn1_encode.c). 2. Location is known, which makes the stack trace useless. 3. Results a crash if panic_on_warn is set. It is also noteworthy that the use of WARN is undocumented, and it should be avoided unless there is a carefully considered rationale to use it. Replace WARN with pr_err, and print the return value instead, which is only useful piece of information. |
| CVE-2024-36974 | In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: always validate TCA_TAPRIO_ATTR_PRIOMAP If one TCA_TAPRIO_ATTR_PRIOMAP attribute has been provided, taprio_parse_mqprio_opt() must validate it, or userspace can inject arbitrary data to the kernel, the second time taprio_change() is called. First call (with valid attributes) sets dev->num_tc to a non zero value. Second call (with arbitrary mqprio attributes) returns early from taprio_parse_mqprio_opt() and bad things can happen. |
| CVE-2024-36973 | In the Linux kernel, the following vulnerability has been resolved: misc: microchip: pci1xxxx: fix double free in the error handling of gp_aux_bus_probe() When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function gp_auxiliary_device_release() calls ida_free() and kfree(aux_device_wrapper) to free memory. We should't call them again in the error handling path. Fix this by skipping the redundant cleanup functions. |
| CVE-2024-36972 | In the Linux kernel, the following vulnerability has been resolved: af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock. Billy Jheng Bing-Jhong reported a race between __unix_gc() and queue_oob(). __unix_gc() tries to garbage-collect close()d inflight sockets, and then if the socket has MSG_OOB in unix_sk(sk)->oob_skb, GC will drop the reference and set NULL to it locklessly. However, the peer socket still can send MSG_OOB message and queue_oob() can update unix_sk(sk)->oob_skb concurrently, leading NULL pointer dereference. [0] To fix the issue, let's update unix_sk(sk)->oob_skb under the sk_receive_queue's lock and take it everywhere we touch oob_skb. Note that we defer kfree_skb() in manage_oob() to silence lockdep false-positive (See [1]). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page PGD 8000000009f5e067 P4D 8000000009f5e067 PUD 9f5d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc5-00191-gd091e579b864 #110 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events delayed_fput RIP: 0010:skb_dequeue (./include/linux/skbuff.h:2386 ./include/linux/skbuff.h:2402 net/core/skbuff.c:3847) Code: 39 e3 74 3e 8b 43 10 48 89 ef 83 e8 01 89 43 10 49 8b 44 24 08 49 c7 44 24 08 00 00 00 00 49 8b 14 24 49 c7 04 24 00 00 00 00 <48> 89 42 08 48 89 10 e8 e7 c5 42 00 4c 89 e0 5b 5d 41 5c c3 cc cc RSP: 0018:ffffc900001bfd48 EFLAGS: 00000002 RAX: 0000000000000000 RBX: ffff8880088f5ae8 RCX: 00000000361289f9 RDX: 0000000000000000 RSI: 0000000000000206 RDI: ffff8880088f5b00 RBP: ffff8880088f5b00 R08: 0000000000080000 R09: 0000000000000001 R10: 0000000000000003 R11: 0000000000000001 R12: ffff8880056b6a00 R13: ffff8880088f5280 R14: 0000000000000001 R15: ffff8880088f5a80 FS: 0000000000000000(0000) GS:ffff88807dd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000006314000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> unix_release_sock (net/unix/af_unix.c:654) unix_release (net/unix/af_unix.c:1050) __sock_release (net/socket.c:660) sock_close (net/socket.c:1423) __fput (fs/file_table.c:423) delayed_fput (fs/file_table.c:444 (discriminator 3)) process_one_work (kernel/workqueue.c:3259) worker_thread (kernel/workqueue.c:3329 kernel/workqueue.c:3416) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> Modules linked in: CR2: 0000000000000008 |
| CVE-2024-36971 | In the Linux kernel, the following vulnerability has been resolved: net: fix __dst_negative_advice() race __dst_negative_advice() does not enforce proper RCU rules when sk->dst_cache must be cleared, leading to possible UAF. RCU rules are that we must first clear sk->sk_dst_cache, then call dst_release(old_dst). Note that sk_dst_reset(sk) is implementing this protocol correctly, while __dst_negative_advice() uses the wrong order. Given that ip6_negative_advice() has special logic against RTF_CACHE, this means each of the three ->negative_advice() existing methods must perform the sk_dst_reset() themselves. Note the check against NULL dst is centralized in __dst_negative_advice(), there is no need to duplicate it in various callbacks. Many thanks to Clement Lecigne for tracking this issue. This old bug became visible after the blamed commit, using UDP sockets. |
| CVE-2024-36970 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: Use request_module_nowait This appears to work around a deadlock regression that came in with the LED merge in 6.9. The deadlock happens on my system with 24 iwlwifi radios, so maybe it something like all worker threads are busy and some work that needs to complete cannot complete. [also remove unnecessary "load_module" var and now-wrong comment] |
| CVE-2024-36969 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix division by zero in setup_dsc_config When slice_height is 0, the division by slice_height in the calculation of the number of slices will cause a division by zero driver crash. This leaves the kernel in a state that requires a reboot. This patch adds a check to avoid the division by zero. The stack trace below is for the 6.8.4 Kernel. I reproduced the issue on a Z16 Gen 2 Lenovo Thinkpad with a Apple Studio Display monitor connected via Thunderbolt. The amdgpu driver crashed with this exception when I rebooted the system with the monitor connected. kernel: ? die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434 arch/x86/kernel/dumpstack.c:447) kernel: ? do_trap (arch/x86/kernel/traps.c:113 arch/x86/kernel/traps.c:154) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? do_error_trap (./arch/x86/include/asm/traps.h:58 arch/x86/kernel/traps.c:175) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? exc_divide_error (arch/x86/kernel/traps.c:194 (discriminator 2)) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? asm_exc_divide_error (./arch/x86/include/asm/idtentry.h:548) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: dc_dsc_compute_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1109) amdgpu After applying this patch, the driver no longer crashes when the monitor is connected and the system is rebooted. I believe this is the same issue reported for 3113. |
| CVE-2024-36968 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- |
| CVE-2024-36967 | In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix memory leak in tpm2_key_encode() 'scratch' is never freed. Fix this by calling kfree() in the success, and in the error case. |
| CVE-2024-36966 | In the Linux kernel, the following vulnerability has been resolved: erofs: reliably distinguish block based and fscache mode When erofs_kill_sb() is called in block dev based mode, s_bdev may not have been initialised yet, and if CONFIG_EROFS_FS_ONDEMAND is enabled, it will be mistaken for fscache mode, and then attempt to free an anon_dev that has never been allocated, triggering the following warning: ============================================ ida_free called for id=0 which is not allocated. WARNING: CPU: 14 PID: 926 at lib/idr.c:525 ida_free+0x134/0x140 Modules linked in: CPU: 14 PID: 926 Comm: mount Not tainted 6.9.0-rc3-dirty #630 RIP: 0010:ida_free+0x134/0x140 Call Trace: <TASK> erofs_kill_sb+0x81/0x90 deactivate_locked_super+0x35/0x80 get_tree_bdev+0x136/0x1e0 vfs_get_tree+0x2c/0xf0 do_new_mount+0x190/0x2f0 [...] ============================================ Now when erofs_kill_sb() is called, erofs_sb_info must have been initialised, so use sbi->fsid to distinguish between the two modes. |
| CVE-2024-36965 | In the Linux kernel, the following vulnerability has been resolved: remoteproc: mediatek: Make sure IPI buffer fits in L2TCM The IPI buffer location is read from the firmware that we load to the System Companion Processor, and it's not granted that both the SRAM (L2TCM) size that is defined in the devicetree node is large enough for that, and while this is especially true for multi-core SCP, it's still useful to check on single-core variants as well. Failing to perform this check may make this driver perform R/W operations out of the L2TCM boundary, resulting (at best) in a kernel panic. To fix that, check that the IPI buffer fits, otherwise return a failure and refuse to boot the relevant SCP core (or the SCP at all, if this is single core). |
| CVE-2024-36964 | In the Linux kernel, the following vulnerability has been resolved: fs/9p: only translate RWX permissions for plain 9P2000 Garbage in plain 9P2000's perm bits is allowed through, which causes it to be able to set (among others) the suid bit. This was presumably not the intent since the unix extended bits are handled explicitly and conditionally on .u. |
| CVE-2024-36963 | In the Linux kernel, the following vulnerability has been resolved: tracefs: Reset permissions on remount if permissions are options There's an inconsistency with the way permissions are handled in tracefs. Because the permissions are generated when accessed, they default to the root inode's permission if they were never set by the user. If the user sets the permissions, then a flag is set and the permissions are saved via the inode (for tracefs files) or an internal attribute field (for eventfs). But if a remount happens that specify the permissions, all the files that were not changed by the user gets updated, but the ones that were are not. If the user were to remount the file system with a given permission, then all files and directories within that file system should be updated. This can cause security issues if a file's permission was updated but the admin forgot about it. They could incorrectly think that remounting with permissions set would update all files, but miss some. For example: # cd /sys/kernel/tracing # chgrp 1002 current_tracer # ls -l [..] -rw-r----- 1 root root 0 May 1 21:25 buffer_size_kb -rw-r----- 1 root root 0 May 1 21:25 buffer_subbuf_size_kb -r--r----- 1 root root 0 May 1 21:25 buffer_total_size_kb -rw-r----- 1 root lkp 0 May 1 21:25 current_tracer -rw-r----- 1 root root 0 May 1 21:25 dynamic_events -r--r----- 1 root root 0 May 1 21:25 dyn_ftrace_total_info -r--r----- 1 root root 0 May 1 21:25 enabled_functions Where current_tracer now has group "lkp". # mount -o remount,gid=1001 . # ls -l -rw-r----- 1 root tracing 0 May 1 21:25 buffer_size_kb -rw-r----- 1 root tracing 0 May 1 21:25 buffer_subbuf_size_kb -r--r----- 1 root tracing 0 May 1 21:25 buffer_total_size_kb -rw-r----- 1 root lkp 0 May 1 21:25 current_tracer -rw-r----- 1 root tracing 0 May 1 21:25 dynamic_events -r--r----- 1 root tracing 0 May 1 21:25 dyn_ftrace_total_info -r--r----- 1 root tracing 0 May 1 21:25 enabled_functions Everything changed but the "current_tracer". Add a new link list that keeps track of all the tracefs_inodes which has the permission flags that tell if the file/dir should use the root inode's permission or not. Then on remount, clear all the flags so that the default behavior of using the root inode's permission is done for all files and directories. |
| CVE-2024-36962 | In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Queue RX packets in IRQ handler instead of disabling BHs Currently the driver uses local_bh_disable()/local_bh_enable() in its IRQ handler to avoid triggering net_rx_action() softirq on exit from netif_rx(). The net_rx_action() could trigger this driver .start_xmit callback, which is protected by the same lock as the IRQ handler, so calling the .start_xmit from netif_rx() from the IRQ handler critical section protected by the lock could lead to an attempt to claim the already claimed lock, and a hang. The local_bh_disable()/local_bh_enable() approach works only in case the IRQ handler is protected by a spinlock, but does not work if the IRQ handler is protected by mutex, i.e. this works for KS8851 with Parallel bus interface, but not for KS8851 with SPI bus interface. Remove the BH manipulation and instead of calling netif_rx() inside the IRQ handler code protected by the lock, queue all the received SKBs in the IRQ handler into a queue first, and once the IRQ handler exits the critical section protected by the lock, dequeue all the queued SKBs and push them all into netif_rx(). At this point, it is safe to trigger the net_rx_action() softirq, since the netif_rx() call is outside of the lock that protects the IRQ handler. |
| CVE-2024-36961 | In the Linux kernel, the following vulnerability has been resolved: thermal/debugfs: Fix two locking issues with thermal zone debug With the current thermal zone locking arrangement in the debugfs code, user space can open the "mitigations" file for a thermal zone before the zone's debugfs pointer is set which will result in a NULL pointer dereference in tze_seq_start(). Moreover, thermal_debug_tz_remove() is not called under the thermal zone lock, so it can run in parallel with the other functions accessing the thermal zone's struct thermal_debugfs object. Then, it may clear tz->debugfs after one of those functions has checked it and the struct thermal_debugfs object may be freed prematurely. To address the first problem, pass a pointer to the thermal zone's struct thermal_debugfs object to debugfs_create_file() in thermal_debug_tz_add() and make tze_seq_start(), tze_seq_next(), tze_seq_stop(), and tze_seq_show() retrieve it from s->private instead of a pointer to the thermal zone object. This will ensure that tz_debugfs will be valid across the "mitigations" file accesses until thermal_debugfs_remove_id() called by thermal_debug_tz_remove() removes that file. To address the second problem, use tz->lock in thermal_debug_tz_remove() around the tz->debugfs value check (in case the same thermal zone is removed at the same time in two different threads) and its reset to NULL. Cc :6.8+ <[email protected]> # 6.8+ |
| CVE-2024-36960 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix invalid reads in fence signaled events Correctly set the length of the drm_event to the size of the structure that's actually used. The length of the drm_event was set to the parent structure instead of to the drm_vmw_event_fence which is supposed to be read. drm_read uses the length parameter to copy the event to the user space thus resuling in oob reads. |
| CVE-2024-36959 | In the Linux kernel, the following vulnerability has been resolved: pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map() If we fail to allocate propname buffer, we need to drop the reference count we just took. Because the pinctrl_dt_free_maps() includes the droping operation, here we call it directly. |
| CVE-2024-36958 | In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix nfsd4_encode_fattr4() crasher Ensure that args.acl is initialized early. It is used in an unconditional call to kfree() on the way out of nfsd4_encode_fattr4(). |
| CVE-2024-36957 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: avoid off-by-one read from userspace We try to access count + 1 byte from userspace with memdup_user(buffer, count + 1). However, the userspace only provides buffer of count bytes and only these count bytes are verified to be okay to access. To ensure the copied buffer is NUL terminated, we use memdup_user_nul instead. |
| CVE-2024-36956 | In the Linux kernel, the following vulnerability has been resolved: thermal/debugfs: Free all thermal zone debug memory on zone removal Because thermal_debug_tz_remove() does not free all memory allocated for thermal zone diagnostics, some of that memory becomes unreachable after freeing the thermal zone's struct thermal_debugfs object. Address this by making thermal_debug_tz_remove() free all of the memory in question. Cc :6.8+ <[email protected]> # 6.8+ |
| CVE-2024-36955 | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node() The documentation for device_get_named_child_node() mentions this important point: " The caller is responsible for calling fwnode_handle_put() on the returned fwnode pointer. " Add fwnode_handle_put() to avoid a leaked reference. |
| CVE-2024-36954 | In the Linux kernel, the following vulnerability has been resolved: tipc: fix a possible memleak in tipc_buf_append __skb_linearize() doesn't free the skb when it fails, so move '*buf = NULL' after __skb_linearize(), so that the skb can be freed on the err path. |
| CVE-2024-36953 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr() vgic_v2_parse_attr() is responsible for finding the vCPU that matches the user-provided CPUID, which (of course) may not be valid. If the ID is invalid, kvm_get_vcpu_by_id() returns NULL, which isn't handled gracefully. Similar to the GICv3 uaccess flow, check that kvm_get_vcpu_by_id() actually returns something and fail the ioctl if not. |
| CVE-2024-36952 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Move NPIV's transport unregistration to after resource clean up There are cases after NPIV deletion where the fabric switch still believes the NPIV is logged into the fabric. This occurs when a vport is unregistered before the Remove All DA_ID CT and LOGO ELS are sent to the fabric. Currently fc_remove_host(), which calls dev_loss_tmo for all D_IDs including the fabric D_ID, removes the last ndlp reference and frees the ndlp rport object. This sometimes causes the race condition where the final DA_ID and LOGO are skipped from being sent to the fabric switch. Fix by moving the fc_remove_host() and scsi_remove_host() calls after DA_ID and LOGO are sent. |
| CVE-2024-36951 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: range check cp bad op exception interrupts Due to a CP interrupt bug, bad packet garbage exception codes are raised. Do a range check so that the debugger and runtime do not receive garbage codes. Update the user api to guard exception code type checking as well. |
| CVE-2024-36950 | In the Linux kernel, the following vulnerability has been resolved: firewire: ohci: mask bus reset interrupts between ISR and bottom half In the FireWire OHCI interrupt handler, if a bus reset interrupt has occurred, mask bus reset interrupts until bus_reset_work has serviced and cleared the interrupt. Normally, we always leave bus reset interrupts masked. We infer the bus reset from the self-ID interrupt that happens shortly thereafter. A scenario where we unmask bus reset interrupts was introduced in 2008 in a007bb857e0b26f5d8b73c2ff90782d9c0972620: If OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we will unmask bus reset interrupts so we can log them. irq_handler logs the bus reset interrupt. However, we can't clear the bus reset event flag in irq_handler, because we won't service the event until later. irq_handler exits with the event flag still set. If the corresponding interrupt is still unmasked, the first bus reset will usually freeze the system due to irq_handler being called again each time it exits. This freeze can be reproduced by loading firewire_ohci with "modprobe firewire_ohci debug=-1" (to enable all debugging output). Apparently there are also some cases where bus_reset_work will get called soon enough to clear the event, and operation will continue normally. This freeze was first reported a few months after a007bb85 was committed, but until now it was never fixed. The debug level could safely be set to -1 through sysfs after the module was loaded, but this would be ineffectual in logging bus reset interrupts since they were only unmasked during initialization. irq_handler will now leave the event flag set but mask bus reset interrupts, so irq_handler won't be called again and there will be no freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will unmask the interrupt after servicing the event, so future interrupts will be caught as desired. As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be enabled through sysfs in addition to during initial module loading. However, when enabled through sysfs, logging of bus reset interrupts will be effective only starting with the second bus reset, after bus_reset_work has executed. |
| CVE-2024-36949 | In the Linux kernel, the following vulnerability has been resolved: amd/amdkfd: sync all devices to wait all processes being evicted If there are more than one device doing reset in parallel, the first device will call kfd_suspend_all_processes() to evict all processes on all devices, this call takes time to finish. other device will start reset and recover without waiting. if the process has not been evicted before doing recover, it will be restored, then caused page fault. |
| CVE-2024-36948 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/xe_migrate: Cast to output precision before multiplying operands Addressing potential overflow in result of multiplication of two lower precision (u32) operands before widening it to higher precision (u64). -v2 Fix commit message and description. (Rodrigo) (cherry picked from commit 34820967ae7b45411f8f4f737c2d63b0c608e0d7) |
| CVE-2024-36947 | In the Linux kernel, the following vulnerability has been resolved: qibfs: fix dentry leak simple_recursive_removal() drops the pinning references to all positives in subtree. For the cases when its argument has been kept alive by the pinning alone that's exactly the right thing to do, but here the argument comes from dcache lookup, that needs to be balanced by explicit dput(). Fucked-up-by: Al Viro <[email protected]> |
| CVE-2024-36946 | In the Linux kernel, the following vulnerability has been resolved: phonet: fix rtm_phonet_notify() skb allocation fill_route() stores three components in the skb: - struct rtmsg - RTA_DST (u8) - RTA_OIF (u32) Therefore, rtm_phonet_notify() should use NLMSG_ALIGN(sizeof(struct rtmsg)) + nla_total_size(1) + nla_total_size(4) |
| CVE-2024-36945 | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix neighbour and rtable leak in smc_ib_find_route() In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable resolved by ip_route_output_flow() are not released or put before return. It may cause the refcount leak, so fix it. |
| CVE-2024-36944 | In the Linux kernel, the following vulnerability has been resolved: Reapply "drm/qxl: simplify qxl_fence_wait" This reverts commit 07ed11afb68d94eadd4ffc082b97c2331307c5ea. Stephen Rostedt reports: "I went to run my tests on my VMs and the tests hung on boot up. Unfortunately, the most I ever got out was: [ 93.607888] Testing event system initcall: OK [ 93.667730] Running tests on all trace events: [ 93.669757] Testing all events: OK [ 95.631064] ------------[ cut here ]------------ Timed out after 60 seconds" and further debugging points to a possible circular locking dependency between the console_owner locking and the worker pool locking. Reverting the commit allows Steve's VM to boot to completion again. [ This may obviously result in the "[TTM] Buffer eviction failed" messages again, which was the reason for that original revert. But at this point this seems preferable to a non-booting system... ] |
| CVE-2024-36943 | In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: fix loss of young/dirty bits during pagemap scan make_uffd_wp_pte() was previously doing: pte = ptep_get(ptep); ptep_modify_prot_start(ptep); pte = pte_mkuffd_wp(pte); ptep_modify_prot_commit(ptep, pte); But if another thread accessed or dirtied the pte between the first 2 calls, this could lead to loss of that information. Since ptep_modify_prot_start() gets and clears atomically, the following is the correct pattern and prevents any possible race. Any access after the first call would see an invalid pte and cause a fault: pte = ptep_modify_prot_start(ptep); pte = pte_mkuffd_wp(pte); ptep_modify_prot_commit(ptep, pte); |
| CVE-2024-36942 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix firmware check error path A recent commit fixed the code that parses the firmware files before downloading them to the controller but introduced a memory leak in case the sanity checks ever fail. Make sure to free the firmware buffer before returning on errors. |
| CVE-2024-36941 | In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: don't free NULL coalescing rule If the parsing fails, we can dereference a NULL pointer here. |
| CVE-2024-36940 | In the Linux kernel, the following vulnerability has been resolved: pinctrl: core: delete incorrect free in pinctrl_enable() The "pctldev" struct is allocated in devm_pinctrl_register_and_init(). It's a devm_ managed pointer that is freed by devm_pinctrl_dev_release(), so freeing it in pinctrl_enable() will lead to a double free. The devm_pinctrl_dev_release() function frees the pindescs and destroys the mutex as well. |
| CVE-2024-36939 | In the Linux kernel, the following vulnerability has been resolved: nfs: Handle error of rpc_proc_register() in nfs_net_init(). syzkaller reported a warning [0] triggered while destroying immature netns. rpc_proc_register() was called in init_nfs_fs(), but its error has been ignored since at least the initial commit 1da177e4c3f4 ("Linux-2.6.12-rc2"). Recently, commit d47151b79e32 ("nfs: expose /proc/net/sunrpc/nfs in net namespaces") converted the procfs to per-netns and made the problem more visible. Even when rpc_proc_register() fails, nfs_net_init() could succeed, and thus nfs_net_exit() will be called while destroying the netns. Then, remove_proc_entry() will be called for non-existing proc directory and trigger the warning below. Let's handle the error of rpc_proc_register() properly in nfs_net_init(). [0]: name 'nfs' WARNING: CPU: 1 PID: 1710 at fs/proc/generic.c:711 remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711 Modules linked in: CPU: 1 PID: 1710 Comm: syz-executor.2 Not tainted 6.8.0-12822-gcd51db110a7e #12 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711 Code: 41 5d 41 5e c3 e8 85 09 b5 ff 48 c7 c7 88 58 64 86 e8 09 0e 71 02 e8 74 09 b5 ff 4c 89 e6 48 c7 c7 de 1b 80 84 e8 c5 ad 97 ff <0f> 0b eb b1 e8 5c 09 b5 ff 48 c7 c7 88 58 64 86 e8 e0 0d 71 02 eb RSP: 0018:ffffc9000c6d7ce0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8880422b8b00 RCX: ffffffff8110503c RDX: ffff888030652f00 RSI: ffffffff81105045 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: ffffffff81bb62cb R12: ffffffff84807ffc R13: ffff88804ad6fcc0 R14: ffffffff84807ffc R15: ffffffff85741ff8 FS: 00007f30cfba8640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff51afe8000 CR3: 000000005a60a005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> rpc_proc_unregister+0x64/0x70 net/sunrpc/stats.c:310 nfs_net_exit+0x1c/0x30 fs/nfs/inode.c:2438 ops_exit_list+0x62/0xb0 net/core/net_namespace.c:170 setup_net+0x46c/0x660 net/core/net_namespace.c:372 copy_net_ns+0x244/0x590 net/core/net_namespace.c:505 create_new_namespaces+0x2ed/0x770 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xae/0x160 kernel/nsproxy.c:228 ksys_unshare+0x342/0x760 kernel/fork.c:3322 __do_sys_unshare kernel/fork.c:3393 [inline] __se_sys_unshare kernel/fork.c:3391 [inline] __x64_sys_unshare+0x1f/0x30 kernel/fork.c:3391 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0x7f30d0febe5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007f30cfba7cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f30d0febe5d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000006c020600 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 R13: 000000000000000b R14: 00007f30d104c530 R15: 0000000000000000 </TASK> |
| CVE-2024-36938 | In the Linux kernel, the following vulnerability has been resolved: bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue Fix NULL pointer data-races in sk_psock_skb_ingress_enqueue() which syzbot reported [1]. [1] BUG: KCSAN: data-race in sk_psock_drop / sk_psock_skb_ingress_enqueue write to 0xffff88814b3278b8 of 8 bytes by task 10724 on cpu 1: sk_psock_stop_verdict net/core/skmsg.c:1257 [inline] sk_psock_drop+0x13e/0x1f0 net/core/skmsg.c:843 sk_psock_put include/linux/skmsg.h:459 [inline] sock_map_close+0x1a7/0x260 net/core/sock_map.c:1648 unix_release+0x4b/0x80 net/unix/af_unix.c:1048 __sock_release net/socket.c:659 [inline] sock_close+0x68/0x150 net/socket.c:1421 __fput+0x2c1/0x660 fs/file_table.c:422 __fput_sync+0x44/0x60 fs/file_table.c:507 __do_sys_close fs/open.c:1556 [inline] __se_sys_close+0x101/0x1b0 fs/open.c:1541 __x64_sys_close+0x1f/0x30 fs/open.c:1541 do_syscall_64+0xd3/0x1d0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 read to 0xffff88814b3278b8 of 8 bytes by task 10713 on cpu 0: sk_psock_data_ready include/linux/skmsg.h:464 [inline] sk_psock_skb_ingress_enqueue+0x32d/0x390 net/core/skmsg.c:555 sk_psock_skb_ingress_self+0x185/0x1e0 net/core/skmsg.c:606 sk_psock_verdict_apply net/core/skmsg.c:1008 [inline] sk_psock_verdict_recv+0x3e4/0x4a0 net/core/skmsg.c:1202 unix_read_skb net/unix/af_unix.c:2546 [inline] unix_stream_read_skb+0x9e/0xf0 net/unix/af_unix.c:2682 sk_psock_verdict_data_ready+0x77/0x220 net/core/skmsg.c:1223 unix_stream_sendmsg+0x527/0x860 net/unix/af_unix.c:2339 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x140/0x180 net/socket.c:745 ____sys_sendmsg+0x312/0x410 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x1e9/0x280 net/socket.c:2667 __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x46/0x50 net/socket.c:2674 do_syscall_64+0xd3/0x1d0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 value changed: 0xffffffff83d7feb0 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 10713 Comm: syz-executor.4 Tainted: G W 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Prior to this, commit 4cd12c6065df ("bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()") fixed one NULL pointer similarly due to no protection of saved_data_ready. Here is another different caller causing the same issue because of the same reason. So we should protect it with sk_callback_lock read lock because the writer side in the sk_psock_drop() uses "write_lock_bh(&sk->sk_callback_lock);". To avoid errors that could happen in future, I move those two pairs of lock into the sk_psock_data_ready(), which is suggested by John Fastabend. |
| CVE-2024-36937 | In the Linux kernel, the following vulnerability has been resolved: xdp: use flags field to disambiguate broadcast redirect When redirecting a packet using XDP, the bpf_redirect_map() helper will set up the redirect destination information in struct bpf_redirect_info (using the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect() function will read this information after the XDP program returns and pass the frame on to the right redirect destination. When using the BPF_F_BROADCAST flag to do multicast redirect to a whole map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct bpf_redirect_info to point to the destination map to be broadcast. And xdp_do_redirect() reacts to the value of this map pointer to decide whether it's dealing with a broadcast or a single-value redirect. However, if the destination map is being destroyed before xdp_do_redirect() is called, the map pointer will be cleared out (by bpf_clear_redirect_map()) without waiting for any XDP programs to stop running. This causes xdp_do_redirect() to think that the redirect was to a single target, but the target pointer is also NULL (since broadcast redirects don't have a single target), so this causes a crash when a NULL pointer is passed to dev_map_enqueue(). To fix this, change xdp_do_redirect() to react directly to the presence of the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info to disambiguate between a single-target and a broadcast redirect. And only read the 'map' pointer if the broadcast flag is set, aborting if that has been cleared out in the meantime. This prevents the crash, while keeping the atomic (cmpxchg-based) clearing of the map pointer itself, and without adding any more checks in the non-broadcast fast path. |
| CVE-2024-36936 | In the Linux kernel, the following vulnerability has been resolved: efi/unaccepted: touch soft lockup during memory accept Commit 50e782a86c98 ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance") has released the spinlock so other CPUs can do memory acceptance in parallel and not triggers softlockup on other CPUs. However the softlock up was intermittent shown up if the memory of the TD guest is large, and the timeout of softlockup is set to 1 second: RIP: 0010:_raw_spin_unlock_irqrestore Call Trace: ? __hrtimer_run_queues <IRQ> ? hrtimer_interrupt ? watchdog_timer_fn ? __sysvec_apic_timer_interrupt ? __pfx_watchdog_timer_fn ? sysvec_apic_timer_interrupt </IRQ> ? __hrtimer_run_queues <TASK> ? hrtimer_interrupt ? asm_sysvec_apic_timer_interrupt ? _raw_spin_unlock_irqrestore ? __sysvec_apic_timer_interrupt ? sysvec_apic_timer_interrupt accept_memory try_to_accept_memory do_huge_pmd_anonymous_page get_page_from_freelist __handle_mm_fault __alloc_pages __folio_alloc ? __tdx_hypercall handle_mm_fault vma_alloc_folio do_user_addr_fault do_huge_pmd_anonymous_page exc_page_fault ? __do_huge_pmd_anonymous_page asm_exc_page_fault __handle_mm_fault When the local irq is enabled at the end of accept_memory(), the softlockup detects that the watchdog on single CPU has not been fed for a while. That is to say, even other CPUs will not be blocked by spinlock, the current CPU might be stunk with local irq disabled for a while, which hurts not only nmi watchdog but also softlockup. Chao Gao pointed out that the memory accept could be time costly and there was similar report before. Thus to avoid any softlocup detection during this stage, give the softlockup a flag to skip the timeout check at the end of accept_memory(), by invoking touch_softlockup_watchdog(). |
| CVE-2024-36935 | In the Linux kernel, the following vulnerability has been resolved: ice: ensure the copied buf is NUL terminated Currently, we allocate a count-sized kernel buffer and copy count bytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user. |
| CVE-2024-36934 | In the Linux kernel, the following vulnerability has been resolved: bna: ensure the copied buf is NUL terminated Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user. |
| CVE-2024-36933 | In the Linux kernel, the following vulnerability has been resolved: nsh: Restore skb->{protocol,data,mac_header} for outer header in nsh_gso_segment(). syzbot triggered various splats (see [0] and links) by a crafted GSO packet of VIRTIO_NET_HDR_GSO_UDP layering the following protocols: ETH_P_8021AD + ETH_P_NSH + ETH_P_IPV6 + IPPROTO_UDP NSH can encapsulate IPv4, IPv6, Ethernet, NSH, and MPLS. As the inner protocol can be Ethernet, NSH GSO handler, nsh_gso_segment(), calls skb_mac_gso_segment() to invoke inner protocol GSO handlers. nsh_gso_segment() does the following for the original skb before calling skb_mac_gso_segment() 1. reset skb->network_header 2. save the original skb->{mac_heaeder,mac_len} in a local variable 3. pull the NSH header 4. resets skb->mac_header 5. set up skb->mac_len and skb->protocol for the inner protocol. and does the following for the segmented skb 6. set ntohs(ETH_P_NSH) to skb->protocol 7. push the NSH header 8. restore skb->mac_header 9. set skb->mac_header + mac_len to skb->network_header 10. restore skb->mac_len There are two problems in 6-7 and 8-9. (a) After 6 & 7, skb->data points to the NSH header, so the outer header (ETH_P_8021AD in this case) is stripped when skb is sent out of netdev. Also, if NSH is encapsulated by NSH + Ethernet (so NSH-Ethernet-NSH), skb_pull() in the first nsh_gso_segment() will make skb->data point to the middle of the outer NSH or Ethernet header because the Ethernet header is not pulled by the second nsh_gso_segment(). (b) While restoring skb->{mac_header,network_header} in 8 & 9, nsh_gso_segment() does not assume that the data in the linear buffer is shifted. However, udp6_ufo_fragment() could shift the data and change skb->mac_header accordingly as demonstrated by syzbot. If this happens, even the restored skb->mac_header points to the middle of the outer header. It seems nsh_gso_segment() has never worked with outer headers so far. At the end of nsh_gso_segment(), the outer header must be restored for the segmented skb, instead of the NSH header. To do that, let's calculate the outer header position relatively from the inner header and set skb->{data,mac_header,protocol} properly. [0]: BUG: KMSAN: uninit-value in ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline] BUG: KMSAN: uninit-value in ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] BUG: KMSAN: uninit-value in ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668 ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668 ipvlan_start_xmit+0x5c/0x1a0 drivers/net/ipvlan/ipvlan_main.c:222 __netdev_start_xmit include/linux/netdevice.h:4989 [inline] netdev_start_xmit include/linux/netdevice.h:5003 [inline] xmit_one net/core/dev.c:3547 [inline] dev_hard_start_xmit+0x244/0xa10 net/core/dev.c:3563 __dev_queue_xmit+0x33ed/0x51c0 net/core/dev.c:4351 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook mm/slub.c:3819 [inline] slab_alloc_node mm/slub.c:3860 [inline] __do_kmalloc_node mm/slub.c:3980 [inline] __kmalloc_node_track_caller+0x705/0x1000 mm/slub.c:4001 kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582 __ ---truncated--- |
| CVE-2024-36932 | In the Linux kernel, the following vulnerability has been resolved: thermal/debugfs: Prevent use-after-free from occurring after cdev removal Since thermal_debug_cdev_remove() does not run under cdev->lock, it can run in parallel with thermal_debug_cdev_state_update() and it may free the struct thermal_debugfs object used by the latter after it has been checked against NULL. If that happens, thermal_debug_cdev_state_update() will access memory that has been freed already causing the kernel to crash. Address this by using cdev->lock in thermal_debug_cdev_remove() around the cdev->debugfs value check (in case the same cdev is removed at the same time in two different threads) and its reset to NULL. Cc :6.8+ <[email protected]> # 6.8+ |
| CVE-2024-36931 | In the Linux kernel, the following vulnerability has been resolved: s390/cio: Ensure the copied buf is NUL terminated Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from userspace to that buffer. Later, we use scanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using scanf. Fix this issue by using memdup_user_nul instead. |
| CVE-2024-36930 | In the Linux kernel, the following vulnerability has been resolved: spi: fix null pointer dereference within spi_sync If spi_sync() is called with the non-empty queue and the same spi_message is then reused, the complete callback for the message remains set while the context is cleared, leading to a null pointer dereference when the callback is invoked from spi_finalize_current_message(). With function inlining disabled, the call stack might look like this: _raw_spin_lock_irqsave from complete_with_flags+0x18/0x58 complete_with_flags from spi_complete+0x8/0xc spi_complete from spi_finalize_current_message+0xec/0x184 spi_finalize_current_message from spi_transfer_one_message+0x2a8/0x474 spi_transfer_one_message from __spi_pump_transfer_message+0x104/0x230 __spi_pump_transfer_message from __spi_transfer_message_noqueue+0x30/0xc4 __spi_transfer_message_noqueue from __spi_sync+0x204/0x248 __spi_sync from spi_sync+0x24/0x3c spi_sync from mcp251xfd_regmap_crc_read+0x124/0x28c [mcp251xfd] mcp251xfd_regmap_crc_read [mcp251xfd] from _regmap_raw_read+0xf8/0x154 _regmap_raw_read from _regmap_bus_read+0x44/0x70 _regmap_bus_read from _regmap_read+0x60/0xd8 _regmap_read from regmap_read+0x3c/0x5c regmap_read from mcp251xfd_alloc_can_err_skb+0x1c/0x54 [mcp251xfd] mcp251xfd_alloc_can_err_skb [mcp251xfd] from mcp251xfd_irq+0x194/0xe70 [mcp251xfd] mcp251xfd_irq [mcp251xfd] from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x118/0x1f4 irq_thread from kthread+0xd8/0xf4 kthread from ret_from_fork+0x14/0x28 Fix this by also setting message->complete to NULL when the transfer is complete. |
| CVE-2024-36929 | In the Linux kernel, the following vulnerability has been resolved: net: core: reject skb_copy(_expand) for fraglist GSO skbs SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become invalid. Return NULL if such an skb is passed to skb_copy or skb_copy_expand, in order to prevent a crash on a potential later call to skb_gso_segment. |
| CVE-2024-36928 | In the Linux kernel, the following vulnerability has been resolved: s390/qeth: Fix kernel panic after setting hsuid Symptom: When the hsuid attribute is set for the first time on an IQD Layer3 device while the corresponding network interface is already UP, the kernel will try to execute a napi function pointer that is NULL. Example: --------------------------------------------------------------------------- [ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP [ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod qdio ccwgroup pkey zcrypt [ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1 [ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR) [ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2) [ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 [ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000 [ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80 [ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8 [ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68 [ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal >0000000000000002: 0000 illegal 0000000000000004: 0000 illegal 0000000000000006: 0000 illegal 0000000000000008: 0000 illegal 000000000000000a: 0000 illegal 000000000000000c: 0000 illegal 000000000000000e: 0000 illegal [ 2057.572800] Call Trace: [ 2057.572801] ([<00000000ec639700>] 0xec639700) [ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398 [ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0 [ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58 [ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60) [ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98 [ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70 [ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv] [ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv] [ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv] [ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8 [ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348 [ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8 [ 2057.572843] Last Breaking-Event-Address: [ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8 [ 2057.572846] [ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt ------------------------------------------------------------------------------------------- Analysis: There is one napi structure per out_q: card->qdio.out_qs[i].napi The napi.poll functions are set during qeth_open(). Since commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") qeth_set_offline()/qeth_set_online() no longer call dev_close()/ dev_open(). So if qeth_free_qdio_queues() cleared card->qdio.out_qs[i].napi.poll while the network interface was UP and the card was offline, they are not set again. Reproduction: chzdev -e $devno layer2=0 ip link set dev $network_interface up echo 0 > /sys/bus/ccw ---truncated--- |
| CVE-2024-36927 | In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix uninit-value access in __ip_make_skb() KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb() tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL while __ip_make_skb() is running, the function will access icmphdr in the skb even if it is not included. This causes the issue reported by KMSAN. Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL on the socket. Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These are union in struct flowi4 and are implicitly initialized by flowi4_init_output(), but we should not rely on specific union layout. Initialize these explicitly in raw_sendmsg(). [1] BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 ip_finish_skb include/net/ip.h:243 [inline] ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508 raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] __ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128 ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365 raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 |
| CVE-2024-36926 | In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE At the time of LPAR boot up, partition firmware provides Open Firmware property ibm,dma-window for the PE. This property is provided on the PCI bus the PE is attached to. There are execptions where the partition firmware might not provide this property for the PE at the time of LPAR boot up. One of the scenario is where the firmware has frozen the PE due to some error condition. This PE is frozen for 24 hours or unless the whole system is reinitialized. Within this time frame, if the LPAR is booted, the frozen PE will be presented to the LPAR but ibm,dma-window property could be missing. Today, under these circumstances, the LPAR oopses with NULL pointer dereference, when configuring the PCI bus the PE is attached to. BUG: Kernel NULL pointer dereference on read at 0x000000c8 Faulting instruction address: 0xc0000000001024c0 Oops: Kernel access of bad area, sig: 7 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: Supported: Yes CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-150600.9-default #1 Hardware name: IBM,9043-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_023) hv:phyp pSeries NIP: c0000000001024c0 LR: c0000000001024b0 CTR: c000000000102450 REGS: c0000000037db5c0 TRAP: 0300 Not tainted (6.4.0-150600.9-default) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28000822 XER: 00000000 CFAR: c00000000010254c DAR: 00000000000000c8 DSISR: 00080000 IRQMASK: 0 ... NIP [c0000000001024c0] pci_dma_bus_setup_pSeriesLP+0x70/0x2a0 LR [c0000000001024b0] pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 Call Trace: pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 (unreliable) pcibios_setup_bus_self+0x1c0/0x370 __of_scan_bus+0x2f8/0x330 pcibios_scan_phb+0x280/0x3d0 pcibios_init+0x88/0x12c do_one_initcall+0x60/0x320 kernel_init_freeable+0x344/0x3e4 kernel_init+0x34/0x1d0 ret_from_kernel_user_thread+0x14/0x1c |
| CVE-2024-36925 | In the Linux kernel, the following vulnerability has been resolved: swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=y Using restricted DMA pools (CONFIG_DMA_RESTRICTED_POOL=y) in conjunction with dynamic SWIOTLB (CONFIG_SWIOTLB_DYNAMIC=y) leads to the following crash when initialising the restricted pools at boot-time: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 | Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP | pc : rmem_swiotlb_device_init+0xfc/0x1ec | lr : rmem_swiotlb_device_init+0xf0/0x1ec | Call trace: | rmem_swiotlb_device_init+0xfc/0x1ec | of_reserved_mem_device_init_by_idx+0x18c/0x238 | of_dma_configure_id+0x31c/0x33c | platform_dma_configure+0x34/0x80 faddr2line reveals that the crash is in the list validation code: include/linux/list.h:83 include/linux/rculist.h:79 include/linux/rculist.h:106 kernel/dma/swiotlb.c:306 kernel/dma/swiotlb.c:1695 because add_mem_pool() is trying to list_add_rcu() to a NULL 'mem->pools'. Fix the crash by initialising the 'mem->pools' list_head in rmem_swiotlb_device_init() before calling add_mem_pool(). |
| CVE-2024-36924 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up() lpfc_worker_wake_up() calls the lpfc_work_done() routine, which takes the hbalock. Thus, lpfc_worker_wake_up() should not be called while holding the hbalock to avoid potential deadlock. |
| CVE-2024-36923 | In the Linux kernel, the following vulnerability has been resolved: fs/9p: fix uninitialized values during inode evict If an iget fails due to not being able to retrieve information from the server then the inode structure is only partially initialized. When the inode gets evicted, references to uninitialized structures (like fscache cookies) were being made. This patch checks for a bad_inode before doing anything other than clearing the inode from the cache. Since the inode is bad, it shouldn't have any state associated with it that needs to be written back (and there really isn't a way to complete those anyways). |
| CVE-2024-36922 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: read txq->read_ptr under lock If we read txq->read_ptr without lock, we can read the same value twice, then obtain the lock, and reclaim from there to two different places, but crucially reclaim the same entry twice, resulting in the WARN_ONCE() a little later. Fix that by reading txq->read_ptr under lock. |
| CVE-2024-36921 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: guard against invalid STA ID on removal Guard against invalid station IDs in iwl_mvm_mld_rm_sta_id as that would result in out-of-bounds array accesses. This prevents issues should the driver get into a bad state during error handling. |
| CVE-2024-36920 | In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Avoid memcpy field-spanning write WARNING When the "storcli2 show" command is executed for eHBA-9600, mpi3mr driver prints this WARNING message: memcpy: detected field-spanning write (size 128) of single field "bsg_reply_buf->reply_buf" at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 (size 1) WARNING: CPU: 0 PID: 12760 at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 mpi3mr_bsg_request+0x6b12/0x7f10 [mpi3mr] The cause of the WARN is 128 bytes memcpy to the 1 byte size array "__u8 replay_buf[1]" in the struct mpi3mr_bsg_in_reply_buf. The array is intended to be a flexible length array, so the WARN is a false positive. To suppress the WARN, remove the constant number '1' from the array declaration and clarify that it has flexible length. Also, adjust the memory allocation size to match the change. |
| CVE-2024-36919 | In the Linux kernel, the following vulnerability has been resolved: scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload The session resources are used by FW and driver when session is offloaded, once session is uploaded these resources are not used. The lock is not required as these fields won't be used any longer. The offload and upload calls are sequential, hence lock is not required. This will suppress following BUG_ON(): [ 449.843143] ------------[ cut here ]------------ [ 449.848302] kernel BUG at mm/vmalloc.c:2727! [ 449.853072] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 449.858712] CPU: 5 PID: 1996 Comm: kworker/u24:2 Not tainted 5.14.0-118.el9.x86_64 #1 Rebooting. [ 449.867454] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.3.4 11/08/2016 [ 449.876966] Workqueue: fc_rport_eq fc_rport_work [libfc] [ 449.882910] RIP: 0010:vunmap+0x2e/0x30 [ 449.887098] Code: 00 65 8b 05 14 a2 f0 4a a9 00 ff ff 00 75 1b 55 48 89 fd e8 34 36 79 00 48 85 ed 74 0b 48 89 ef 31 f6 5d e9 14 fc ff ff 5d c3 <0f> 0b 0f 1f 44 00 00 41 57 41 56 49 89 ce 41 55 49 89 fd 41 54 41 [ 449.908054] RSP: 0018:ffffb83d878b3d68 EFLAGS: 00010206 [ 449.913887] RAX: 0000000080000201 RBX: ffff8f4355133550 RCX: 000000000d400005 [ 449.921843] RDX: 0000000000000001 RSI: 0000000000001000 RDI: ffffb83da53f5000 [ 449.929808] RBP: ffff8f4ac6675800 R08: ffffb83d878b3d30 R09: 00000000000efbdf [ 449.937774] R10: 0000000000000003 R11: ffff8f434573e000 R12: 0000000000001000 [ 449.945736] R13: 0000000000001000 R14: ffffb83da53f5000 R15: ffff8f43d4ea3ae0 [ 449.953701] FS: 0000000000000000(0000) GS:ffff8f529fc80000(0000) knlGS:0000000000000000 [ 449.962732] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 449.969138] CR2: 00007f8cf993e150 CR3: 0000000efbe10003 CR4: 00000000003706e0 [ 449.977102] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 449.985065] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 449.993028] Call Trace: [ 449.995756] __iommu_dma_free+0x96/0x100 [ 450.000139] bnx2fc_free_session_resc+0x67/0x240 [bnx2fc] [ 450.006171] bnx2fc_upload_session+0xce/0x100 [bnx2fc] [ 450.011910] bnx2fc_rport_event_handler+0x9f/0x240 [bnx2fc] [ 450.018136] fc_rport_work+0x103/0x5b0 [libfc] [ 450.023103] process_one_work+0x1e8/0x3c0 [ 450.027581] worker_thread+0x50/0x3b0 [ 450.031669] ? rescuer_thread+0x370/0x370 [ 450.036143] kthread+0x149/0x170 [ 450.039744] ? set_kthread_struct+0x40/0x40 [ 450.044411] ret_from_fork+0x22/0x30 [ 450.048404] Modules linked in: vfat msdos fat xfs nfs_layout_nfsv41_files rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver dm_service_time qedf qed crc8 bnx2fc libfcoe libfc scsi_transport_fc intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp dcdbas rapl intel_cstate intel_uncore mei_me pcspkr mei ipmi_ssif lpc_ich ipmi_si fuse zram ext4 mbcache jbd2 loop nfsv3 nfs_acl nfs lockd grace fscache netfs irdma ice sd_mod t10_pi sg ib_uverbs ib_core 8021q garp mrp stp llc mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi fb_sys_fops cec crct10dif_pclmul ahci crc32_pclmul bnx2x drm ghash_clmulni_intel libahci rfkill i40e libata megaraid_sas mdio wmi sunrpc lrw dm_crypt dm_round_robin dm_multipath dm_snapshot dm_bufio dm_mirror dm_region_hash dm_log dm_zero dm_mod linear raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid6_pq libcrc32c crc32c_intel raid1 raid0 iscsi_ibft squashfs be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls [ 450.048497] libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi edd ipmi_devintf ipmi_msghandler [ 450.159753] ---[ end trace 712de2c57c64abc8 ]--- |
| CVE-2024-36918 | In the Linux kernel, the following vulnerability has been resolved: bpf: Check bloom filter map value size This patch adds a missing check to bloom filter creating, rejecting values above KMALLOC_MAX_SIZE. This brings the bloom map in line with many other map types. The lack of this protection can cause kernel crashes for value sizes that overflow int's. Such a crash was caught by syzkaller. The next patch adds more guard-rails at a lower level. |
| CVE-2024-36917 | In the Linux kernel, the following vulnerability has been resolved: block: fix overflow in blk_ioctl_discard() There is no check for overflow of 'start + len' in blk_ioctl_discard(). Hung task occurs if submit an discard ioctl with the following param: start = 0x80000000000ff000, len = 0x8000000000fff000; Add the overflow validation now. |
| CVE-2024-36916 | In the Linux kernel, the following vulnerability has been resolved: blk-iocost: avoid out of bounds shift UBSAN catches undefined behavior in blk-iocost, where sometimes iocg->delay is shifted right by a number that is too large, resulting in undefined behavior on some architectures. [ 186.556576] ------------[ cut here ]------------ UBSAN: shift-out-of-bounds in block/blk-iocost.c:1366:23 shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long') CPU: 16 PID: 0 Comm: swapper/16 Tainted: G S E N 6.9.0-0_fbk700_debug_rc2_kbuilder_0_gc85af715cac0 #1 Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020 Call Trace: <IRQ> dump_stack_lvl+0x8f/0xe0 __ubsan_handle_shift_out_of_bounds+0x22c/0x280 iocg_kick_delay+0x30b/0x310 ioc_timer_fn+0x2fb/0x1f80 __run_timer_base+0x1b6/0x250 ... Avoid that undefined behavior by simply taking the "delay = 0" branch if the shift is too large. I am not sure what the symptoms of an undefined value delay will be, but I suspect it could be more than a little annoying to debug. |
| CVE-2024-36915 | In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies syzbot reported unsafe calls to copy_from_sockptr() [1] Use copy_safe_from_sockptr() instead. [1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255 Read of size 4 at addr ffff88801caa1ec3 by task syz-executor459/5078 CPU: 0 PID: 5078 Comm: syz-executor459 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255 do_sock_setsockopt+0x3b1/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfd/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7f7fac07fd89 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff660eb788 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f7fac07fd89 RDX: 0000000000000000 RSI: 0000000000000118 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000020000a80 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 |
| CVE-2024-36914 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip on writeback when it's not applicable [WHY] dynamic memory safety error detector (KASAN) catches and generates error messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not support certain features which are not initialized. [HOW] Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK. |
| CVE-2024-36913 | In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. VMBus code could free decrypted pages if set_memory_encrypted()/decrypted() fails. Leak the pages if this happens. |
| CVE-2024-36912 | In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. In order to make sure callers of vmbus_establish_gpadl() and vmbus_teardown_gpadl() don't return decrypted/shared pages to allocators, add a field in struct vmbus_gpadl to keep track of the decryption status of the buffers. This will allow the callers to know if they should free or leak the pages. |
| CVE-2024-36911 | In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Don't free decrypted memory In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The netvsc driver could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the gpadl to decide whether to free the memory. |
| CVE-2024-36910 | In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Don't free decrypted memory In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The VMBus device UIO driver could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the gpadl to decide whether to free the memory. |
| CVE-2024-36909 | In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The VMBus ring buffer code could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the struct vmbus_gpadl for the ring buffers to decide whether to free the memory. |
| CVE-2024-36908 | In the Linux kernel, the following vulnerability has been resolved: blk-iocost: do not WARN if iocg was already offlined In iocg_pay_debt(), warn is triggered if 'active_list' is empty, which is intended to confirm iocg is active when it has debt. However, warn can be triggered during a blkcg or disk removal, if iocg_waitq_timer_fn() is run at that time: WARNING: CPU: 0 PID: 2344971 at block/blk-iocost.c:1402 iocg_pay_debt+0x14c/0x190 Call trace: iocg_pay_debt+0x14c/0x190 iocg_kick_waitq+0x438/0x4c0 iocg_waitq_timer_fn+0xd8/0x130 __run_hrtimer+0x144/0x45c __hrtimer_run_queues+0x16c/0x244 hrtimer_interrupt+0x2cc/0x7b0 The warn in this situation is meaningless. Since this iocg is being removed, the state of the 'active_list' is irrelevant, and 'waitq_timer' is canceled after removing 'active_list' in ioc_pd_free(), which ensures iocg is freed after iocg_waitq_timer_fn() returns. Therefore, add the check if iocg was already offlined to avoid warn when removing a blkcg or disk. |
| CVE-2024-36907 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: add a missing rpc_stat for TCP TLS Commit 1548036ef120 ("nfs: make the rpc_stat per net namespace") added functionality to specify rpc_stats function but missed adding it to the TCP TLS functionality. As the result, mounting with xprtsec=tls lead to the following kernel oops. [ 128.984192] Unable to handle kernel NULL pointer dereference at virtual address 000000000000001c [ 128.985058] Mem abort info: [ 128.985372] ESR = 0x0000000096000004 [ 128.985709] EC = 0x25: DABT (current EL), IL = 32 bits [ 128.986176] SET = 0, FnV = 0 [ 128.986521] EA = 0, S1PTW = 0 [ 128.986804] FSC = 0x04: level 0 translation fault [ 128.987229] Data abort info: [ 128.987597] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 128.988169] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 128.988811] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 128.989302] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000106c84000 [ 128.990048] [000000000000001c] pgd=0000000000000000, p4d=0000000000000000 [ 128.990736] Internal error: Oops: 0000000096000004 [#1] SMP [ 128.991168] Modules linked in: nfs_layout_nfsv41_files rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace netfs uinput dm_mod nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables nfnetlink qrtr vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vsock sunrpc vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops uvc videobuf2_v4l2 videodev videobuf2_common mc vmw_vmci xfs libcrc32c e1000e crct10dif_ce ghash_ce sha2_ce vmwgfx nvme sha256_arm64 nvme_core sr_mod cdrom sha1_ce drm_ttm_helper ttm drm_kms_helper drm sg fuse [ 128.996466] CPU: 0 PID: 179 Comm: kworker/u4:26 Kdump: loaded Not tainted 6.8.0-rc6+ #12 [ 128.997226] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.21805430.BA64.2305221830 05/22/2023 [ 128.998084] Workqueue: xprtiod xs_tcp_tls_setup_socket [sunrpc] [ 128.998701] pstate: 81400005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 128.999384] pc : call_start+0x74/0x138 [sunrpc] [ 128.999809] lr : __rpc_execute+0xb8/0x3e0 [sunrpc] [ 129.000244] sp : ffff8000832b3a00 [ 129.000508] x29: ffff8000832b3a00 x28: ffff800081ac79c0 x27: ffff800081ac7000 [ 129.001111] x26: 0000000004248060 x25: 0000000000000000 x24: ffff800081596008 [ 129.001757] x23: ffff80007b087240 x22: ffff00009a509d30 x21: 0000000000000000 [ 129.002345] x20: ffff000090075600 x19: ffff00009a509d00 x18: ffffffffffffffff [ 129.002912] x17: 733d4d4554535953 x16: 42555300312d746e x15: ffff8000832b3a88 [ 129.003464] x14: ffffffffffffffff x13: ffff8000832b3a7d x12: 0000000000000008 [ 129.004021] x11: 0101010101010101 x10: ffff8000150cb560 x9 : ffff80007b087c00 [ 129.004577] x8 : ffff00009a509de0 x7 : 0000000000000000 x6 : 00000000be8c4ee3 [ 129.005026] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff000094d56680 [ 129.005425] x2 : ffff80007b0637f8 x1 : ffff000090075600 x0 : ffff00009a509d00 [ 129.005824] Call trace: [ 129.005967] call_start+0x74/0x138 [sunrpc] [ 129.006233] __rpc_execute+0xb8/0x3e0 [sunrpc] [ 129.006506] rpc_execute+0x160/0x1d8 [sunrpc] [ 129.006778] rpc_run_task+0x148/0x1f8 [sunrpc] [ 129.007204] tls_probe+0x80/0xd0 [sunrpc] [ 129.007460] rpc_ping+0x28/0x80 [sunrpc] [ 129.007715] rpc_create_xprt+0x134/0x1a0 [sunrpc] [ 129.007999] rpc_create+0x128/0x2a0 [sunrpc] [ 129.008264] xs_tcp_tls_setup_socket+0xdc/0x508 [sunrpc] [ 129.008583] process_one_work+0x174/0x3c8 [ 129.008813] worker_thread+0x2c8/0x3e0 [ 129.009033] kthread+0x100/0x110 [ 129.009225] ret_from_fork+0x10/0x20 [ 129.009432] Code: f0ffffc2 911fe042 aa1403e1 aa1303e0 (b9401c83) |
| CVE-2024-36906 | In the Linux kernel, the following vulnerability has been resolved: ARM: 9381/1: kasan: clear stale stack poison We found below OOB crash: [ 33.452494] ================================================================== [ 33.453513] BUG: KASAN: stack-out-of-bounds in refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec [ 33.454660] Write of size 164 at addr c1d03d30 by task swapper/0/0 [ 33.455515] [ 33.455767] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.1.25-mainline #1 [ 33.456880] Hardware name: Generic DT based system [ 33.457555] unwind_backtrace from show_stack+0x18/0x1c [ 33.458326] show_stack from dump_stack_lvl+0x40/0x4c [ 33.459072] dump_stack_lvl from print_report+0x158/0x4a4 [ 33.459863] print_report from kasan_report+0x9c/0x148 [ 33.460616] kasan_report from kasan_check_range+0x94/0x1a0 [ 33.461424] kasan_check_range from memset+0x20/0x3c [ 33.462157] memset from refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec [ 33.463064] refresh_cpu_vm_stats.constprop.0 from tick_nohz_idle_stop_tick+0x180/0x53c [ 33.464181] tick_nohz_idle_stop_tick from do_idle+0x264/0x354 [ 33.465029] do_idle from cpu_startup_entry+0x20/0x24 [ 33.465769] cpu_startup_entry from rest_init+0xf0/0xf4 [ 33.466528] rest_init from arch_post_acpi_subsys_init+0x0/0x18 [ 33.467397] [ 33.467644] The buggy address belongs to stack of task swapper/0/0 [ 33.468493] and is located at offset 112 in frame: [ 33.469172] refresh_cpu_vm_stats.constprop.0+0x0/0x2ec [ 33.469917] [ 33.470165] This frame has 2 objects: [ 33.470696] [32, 76) 'global_zone_diff' [ 33.470729] [112, 276) 'global_node_diff' [ 33.471294] [ 33.472095] The buggy address belongs to the physical page: [ 33.472862] page:3cd72da8 refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x41d03 [ 33.473944] flags: 0x1000(reserved|zone=0) [ 33.474565] raw: 00001000 ed741470 ed741470 00000000 00000000 00000000 ffffffff 00000001 [ 33.475656] raw: 00000000 [ 33.476050] page dumped because: kasan: bad access detected [ 33.476816] [ 33.477061] Memory state around the buggy address: [ 33.477732] c1d03c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.478630] c1d03c80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 [ 33.479526] >c1d03d00: 00 04 f2 f2 f2 f2 00 00 00 00 00 00 f1 f1 f1 f1 [ 33.480415] ^ [ 33.481195] c1d03d80: 00 00 00 00 00 00 00 00 00 00 04 f3 f3 f3 f3 f3 [ 33.482088] c1d03e00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.482978] ================================================================== We find the root cause of this OOB is that arm does not clear stale stack poison in the case of cpuidle. This patch refer to arch/arm64/kernel/sleep.S to resolve this issue. From cited commit [1] that explain the problem Functions which the compiler has instrumented for KASAN place poison on the stack shadow upon entry and remove this poison prior to returning. In the case of cpuidle, CPUs exit the kernel a number of levels deep in C code. Any instrumented functions on this critical path will leave portions of the stack shadow poisoned. If CPUs lose context and return to the kernel via a cold path, we restore a prior context saved in __cpu_suspend_enter are forgotten, and we never remove the poison they placed in the stack shadow area by functions calls between this and the actual exit of the kernel. Thus, (depending on stackframe layout) subsequent calls to instrumented functions may hit this stale poison, resulting in (spurious) KASAN splats to the console. To avoid this, clear any stale poison from the idle thread for a CPU prior to bringing a CPU online. From cited commit [2] Extend to check for CONFIG_KASAN_STACK [1] commit 0d97e6d8024c ("arm64: kasan: clear stale stack poison") [2] commit d56a9ef84bd0 ("kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK") |
| CVE-2024-36905 | In the Linux kernel, the following vulnerability has been resolved: tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets TCP_SYN_RECV state is really special, it is only used by cross-syn connections, mostly used by fuzzers. In the following crash [1], syzbot managed to trigger a divide by zero in tcp_rcv_space_adjust() A socket makes the following state transitions, without ever calling tcp_init_transfer(), meaning tcp_init_buffer_space() is also not called. TCP_CLOSE connect() TCP_SYN_SENT TCP_SYN_RECV shutdown() -> tcp_shutdown(sk, SEND_SHUTDOWN) TCP_FIN_WAIT1 To fix this issue, change tcp_shutdown() to not perform a TCP_SYN_RECV -> TCP_FIN_WAIT1 transition, which makes no sense anyway. When tcp_rcv_state_process() later changes socket state from TCP_SYN_RECV to TCP_ESTABLISH, then look at sk->sk_shutdown to finally enter TCP_FIN_WAIT1 state, and send a FIN packet from a sane socket state. This means tcp_send_fin() can now be called from BH context, and must use GFP_ATOMIC allocations. [1] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 5084 Comm: syz-executor358 Not tainted 6.9.0-rc6-syzkaller-00022-g98369dccd2f8 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:tcp_rcv_space_adjust+0x2df/0x890 net/ipv4/tcp_input.c:767 Code: e3 04 4c 01 eb 48 8b 44 24 38 0f b6 04 10 84 c0 49 89 d5 0f 85 a5 03 00 00 41 8b 8e c8 09 00 00 89 e8 29 c8 48 0f af c3 31 d2 <48> f7 f1 48 8d 1c 43 49 8d 96 76 08 00 00 48 89 d0 48 c1 e8 03 48 RSP: 0018:ffffc900031ef3f0 EFLAGS: 00010246 RAX: 0c677a10441f8f42 RBX: 000000004fb95e7e RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000027d4b11f R08: ffffffff89e535a4 R09: 1ffffffff25e6ab7 R10: dffffc0000000000 R11: ffffffff8135e920 R12: ffff88802a9f8d30 R13: dffffc0000000000 R14: ffff88802a9f8d00 R15: 1ffff1100553f2da FS: 00005555775c0380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1155bf2304 CR3: 000000002b9f2000 CR4: 0000000000350ef0 Call Trace: <TASK> tcp_recvmsg_locked+0x106d/0x25a0 net/ipv4/tcp.c:2513 tcp_recvmsg+0x25d/0x920 net/ipv4/tcp.c:2578 inet6_recvmsg+0x16a/0x730 net/ipv6/af_inet6.c:680 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1068 ____sys_recvmsg+0x1db/0x470 net/socket.c:2803 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x474/0xae0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7faeb6363db9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcc1997168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faeb6363db9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000001c R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000001 |
| CVE-2024-36904 | In the Linux kernel, the following vulnerability has been resolved: tcp: Use refcount_inc_not_zero() in tcp_twsk_unique(). Anderson Nascimento reported a use-after-free splat in tcp_twsk_unique() with nice analysis. Since commit ec94c2696f0b ("tcp/dccp: avoid one atomic operation for timewait hashdance"), inet_twsk_hashdance() sets TIME-WAIT socket's sk_refcnt after putting it into ehash and releasing the bucket lock. Thus, there is a small race window where other threads could try to reuse the port during connect() and call sock_hold() in tcp_twsk_unique() for the TIME-WAIT socket with zero refcnt. If that happens, the refcnt taken by tcp_twsk_unique() is overwritten and sock_put() will cause underflow, triggering a real use-after-free somewhere else. To avoid the use-after-free, we need to use refcount_inc_not_zero() in tcp_twsk_unique() and give up on reusing the port if it returns false. [0]: refcount_t: addition on 0; use-after-free. WARNING: CPU: 0 PID: 1039313 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110 CPU: 0 PID: 1039313 Comm: trigger Not tainted 6.8.6-200.fc39.x86_64 #1 Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.21805430.B64.2305221830 05/22/2023 RIP: 0010:refcount_warn_saturate+0xe5/0x110 Code: 42 8e ff 0f 0b c3 cc cc cc cc 80 3d aa 13 ea 01 00 0f 85 5e ff ff ff 48 c7 c7 f8 8e b7 82 c6 05 96 13 ea 01 01 e8 7b 42 8e ff <0f> 0b c3 cc cc cc cc 48 c7 c7 50 8f b7 82 c6 05 7a 13 ea 01 01 e8 RSP: 0018:ffffc90006b43b60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888009bb3ef0 RCX: 0000000000000027 RDX: ffff88807be218c8 RSI: 0000000000000001 RDI: ffff88807be218c0 RBP: 0000000000069d70 R08: 0000000000000000 R09: ffffc90006b439f0 R10: ffffc90006b439e8 R11: 0000000000000003 R12: ffff8880029ede84 R13: 0000000000004e20 R14: ffffffff84356dc0 R15: ffff888009bb3ef0 FS: 00007f62c10926c0(0000) GS:ffff88807be00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020ccb000 CR3: 000000004628c005 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <TASK> ? refcount_warn_saturate+0xe5/0x110 ? __warn+0x81/0x130 ? refcount_warn_saturate+0xe5/0x110 ? report_bug+0x171/0x1a0 ? refcount_warn_saturate+0xe5/0x110 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? refcount_warn_saturate+0xe5/0x110 tcp_twsk_unique+0x186/0x190 __inet_check_established+0x176/0x2d0 __inet_hash_connect+0x74/0x7d0 ? __pfx___inet_check_established+0x10/0x10 tcp_v4_connect+0x278/0x530 __inet_stream_connect+0x10f/0x3d0 inet_stream_connect+0x3a/0x60 __sys_connect+0xa8/0xd0 __x64_sys_connect+0x18/0x20 do_syscall_64+0x83/0x170 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7f62c11a885d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a3 45 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007f62c1091e58 EFLAGS: 00000296 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020ccb004 RCX: 00007f62c11a885d RDX: 0000000000000010 RSI: 0000000020ccb000 RDI: 0000000000000003 RBP: 00007f62c1091e90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 00007f62c10926c0 R13: ffffffffffffff88 R14: 0000000000000000 R15: 00007ffe237885b0 </TASK> |
| CVE-2024-36903 | In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix potential uninit-value access in __ip6_make_skb() As it was done in commit fc1092f51567 ("ipv4: Fix uninit-value access in __ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flags instead of testing HDRINCL on the socket to avoid a race condition which causes uninit-value access. |
| CVE-2024-36902 | In the Linux kernel, the following vulnerability has been resolved: ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action() syzbot is able to trigger the following crash [1], caused by unsafe ip6_dst_idev() use. Indeed ip6_dst_idev() can return NULL, and must always be checked. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 31648 Comm: syz-executor.0 Not tainted 6.9.0-rc4-next-20240417-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:__fib6_rule_action net/ipv6/fib6_rules.c:237 [inline] RIP: 0010:fib6_rule_action+0x241/0x7b0 net/ipv6/fib6_rules.c:267 Code: 02 00 00 49 8d 9f d8 00 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 f9 32 bf f7 48 8b 1b 48 89 d8 48 c1 e8 03 <42> 80 3c 20 00 74 08 48 89 df e8 e0 32 bf f7 4c 8b 03 48 89 ef 4c RSP: 0018:ffffc9000fc1f2f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1a772f98c8186700 RDX: 0000000000000003 RSI: ffffffff8bcac4e0 RDI: ffffffff8c1f9760 RBP: ffff8880673fb980 R08: ffffffff8fac15ef R09: 1ffffffff1f582bd R10: dffffc0000000000 R11: fffffbfff1f582be R12: dffffc0000000000 R13: 0000000000000080 R14: ffff888076509000 R15: ffff88807a029a00 FS: 00007f55e82ca6c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b31d23000 CR3: 0000000022b66000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> fib_rules_lookup+0x62c/0xdb0 net/core/fib_rules.c:317 fib6_rule_lookup+0x1fd/0x790 net/ipv6/fib6_rules.c:108 ip6_route_output_flags_noref net/ipv6/route.c:2637 [inline] ip6_route_output_flags+0x38e/0x610 net/ipv6/route.c:2649 ip6_route_output include/net/ip6_route.h:93 [inline] ip6_dst_lookup_tail+0x189/0x11a0 net/ipv6/ip6_output.c:1120 ip6_dst_lookup_flow+0xb9/0x180 net/ipv6/ip6_output.c:1250 sctp_v6_get_dst+0x792/0x1e20 net/sctp/ipv6.c:326 sctp_transport_route+0x12c/0x2e0 net/sctp/transport.c:455 sctp_assoc_add_peer+0x614/0x15c0 net/sctp/associola.c:662 sctp_connect_new_asoc+0x31d/0x6c0 net/sctp/socket.c:1099 __sctp_connect+0x66d/0xe30 net/sctp/socket.c:1197 sctp_connect net/sctp/socket.c:4819 [inline] sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| CVE-2024-36901 | In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent NULL dereference in ip6_output() According to syzbot, there is a chance that ip6_dst_idev() returns NULL in ip6_output(). Most places in IPv6 stack deal with a NULL idev just fine, but not here. syzbot reported: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7] CPU: 0 PID: 9775 Comm: syz-executor.4 Not tainted 6.9.0-rc5-syzkaller-00157-g6a30653b604a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:ip6_output+0x231/0x3f0 net/ipv6/ip6_output.c:237 Code: 3c 1e 00 49 89 df 74 08 4c 89 ef e8 19 58 db f7 48 8b 44 24 20 49 89 45 00 49 89 c5 48 8d 9d e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 4c 8b 74 24 28 0f 85 61 01 00 00 8b 1b 31 ff RSP: 0018:ffffc9000927f0d8 EFLAGS: 00010202 RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000040000 RDX: ffffc900131f9000 RSI: 0000000000004f47 RDI: 0000000000004f48 RBP: 0000000000000000 R08: ffffffff8a1f0b9a R09: 1ffffffff1f51fad R10: dffffc0000000000 R11: fffffbfff1f51fae R12: ffff8880293ec8c0 R13: ffff88805d7fc000 R14: 1ffff1100527d91a R15: dffffc0000000000 FS: 00007f135c6856c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 0000000064096000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0xefe/0x17f0 net/ipv6/ip6_output.c:358 sctp_v6_xmit+0x9f2/0x13f0 net/sctp/ipv6.c:248 sctp_packet_transmit+0x26ad/0x2ca0 net/sctp/output.c:653 sctp_packet_singleton+0x22c/0x320 net/sctp/outqueue.c:783 sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline] sctp_outq_flush+0x6d5/0x3e20 net/sctp/outqueue.c:1212 sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x59cc/0x60c0 net/sctp/sm_sideeffect.c:1169 sctp_primitive_ASSOCIATE+0x95/0xc0 net/sctp/primitive.c:73 __sctp_connect+0x9cd/0xe30 net/sctp/socket.c:1234 sctp_connect net/sctp/socket.c:4819 [inline] sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| CVE-2024-36900 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when devlink reload during initialization The devlink reload process will access the hardware resources, but the register operation is done before the hardware is initialized. So, processing the devlink reload during initialization may lead to kernel crash. This patch fixes this by registering the devlink after hardware initialization. |
| CVE-2024-36899 | In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: Fix use after free in lineinfo_changed_notify The use-after-free issue occurs as follows: when the GPIO chip device file is being closed by invoking gpio_chrdev_release(), watched_lines is freed by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier chain failed due to waiting write rwsem. Additionally, one of the GPIO chip's lines is also in the release process and holds the notifier chain's read rwsem. Consequently, a race condition leads to the use-after-free of watched_lines. Here is the typical stack when issue happened: [free] gpio_chrdev_release() --> bitmap_free(cdev->watched_lines) <-- freed --> blocking_notifier_chain_unregister() --> down_write(&nh->rwsem) <-- waiting rwsem --> __down_write_common() --> rwsem_down_write_slowpath() --> schedule_preempt_disabled() --> schedule() [use] st54spi_gpio_dev_release() --> gpio_free() --> gpiod_free() --> gpiod_free_commit() --> gpiod_line_state_notify() --> blocking_notifier_call_chain() --> down_read(&nh->rwsem); <-- held rwsem --> notifier_call_chain() --> lineinfo_changed_notify() --> test_bit(xxxx, cdev->watched_lines) <-- use after free The side effect of the use-after-free issue is that a GPIO line event is being generated for userspace where it shouldn't. However, since the chrdev is being closed, userspace won't have the chance to read that event anyway. To fix the issue, call the bitmap_free() function after the unregistration of lineinfo_changed_nb notifier chain. |
| CVE-2024-36898 | In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: fix uninitialised kfifo If a line is requested with debounce, and that results in debouncing in software, and the line is subsequently reconfigured to enable edge detection then the allocation of the kfifo to contain edge events is overlooked. This results in events being written to and read from an uninitialised kfifo. Read events are returned to userspace. Initialise the kfifo in the case where the software debounce is already active. |
| CVE-2024-36897 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Atom Integrated System Info v2_2 for DCN35 New request from KMD/VBIOS in order to support new UMA carveout model. This fixes a null dereference from accessing Ctx->dc_bios->integrated_info while it was NULL. DAL parses through the BIOS and extracts the necessary integrated_info but was missing a case for the new BIOS version 2.3. |
| CVE-2024-36896 | In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix access violation during port device removal Testing with KASAN and syzkaller revealed a bug in port.c:disable_store(): usb_hub_to_struct_hub() can return NULL if the hub that the port belongs to is concurrently removed, but the function does not check for this possibility before dereferencing the returned value. It turns out that the first dereference is unnecessary, since hub->intfdev is the parent of the port device, so it can be changed easily. Adding a check for hub == NULL prevents further problems. The same bug exists in the disable_show() routine, and it can be fixed the same way. |
| CVE-2024-36895 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: use correct buffer size when parsing configfs lists This commit fixes uvc gadget support on 32-bit platforms. Commit 0df28607c5cb ("usb: gadget: uvc: Generalise helper functions for reuse") introduced a helper function __uvcg_iter_item_entries() to aid with parsing lists of items on configfs attributes stores. This function is a generalization of another very similar function, which used a stack-allocated temporary buffer of fixed size for each item in the list and used the sizeof() operator to check for potential buffer overruns. The new function was changed to allocate the now variably sized temp buffer on heap, but wasn't properly updated to also check for max buffer size using the computed size instead of sizeof() operator. As a result, the maximum item size was 7 (plus null terminator) on 64-bit platforms, and 3 on 32-bit ones. While 7 is accidentally just barely enough, 3 is definitely too small for some of UVC configfs attributes. For example, dwFrameInteval, specified in 100ns units, usually has 6-digit item values, e.g. 166666 for 60fps. |
| CVE-2024-36894 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete FFS based applications can utilize the aio_cancel() callback to dequeue pending USB requests submitted to the UDC. There is a scenario where the FFS application issues an AIO cancel call, while the UDC is handling a soft disconnect. For a DWC3 based implementation, the callstack looks like the following: DWC3 Gadget FFS Application dwc3_gadget_soft_disconnect() ... --> dwc3_stop_active_transfers() --> dwc3_gadget_giveback(-ESHUTDOWN) --> ffs_epfile_async_io_complete() ffs_aio_cancel() --> usb_ep_free_request() --> usb_ep_dequeue() There is currently no locking implemented between the AIO completion handler and AIO cancel, so the issue occurs if the completion routine is running in parallel to an AIO cancel call coming from the FFS application. As the completion call frees the USB request (io_data->req) the FFS application is also referencing it for the usb_ep_dequeue() call. This can lead to accessing a stale/hanging pointer. commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently") relocated the usb_ep_free_request() into ffs_epfile_async_io_complete(). However, in order to properly implement locking to mitigate this issue, the spinlock can't be added to ffs_epfile_async_io_complete(), as usb_ep_dequeue() (if successfully dequeuing a USB request) will call the function driver's completion handler in the same context. Hence, leading into a deadlock. Fix this issue by moving the usb_ep_free_request() back to ffs_user_copy_worker(), and ensuring that it explicitly sets io_data->req to NULL after freeing it within the ffs->eps_lock. This resolves the race condition above, as the ffs_aio_cancel() routine will not continue attempting to dequeue a request that has already been freed, or the ffs_user_copy_work() not freeing the USB request until the AIO cancel is done referencing it. This fix depends on commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently") |
| CVE-2024-36893 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Check for port partner validity before consuming it typec_register_partner() does not guarantee partner registration to always succeed. In the event of failure, port->partner is set to the error value or NULL. Given that port->partner validity is not checked, this results in the following crash: Unable to handle kernel NULL pointer dereference at virtual address xx pc : run_state_machine+0x1bc8/0x1c08 lr : run_state_machine+0x1b90/0x1c08 .. Call trace: run_state_machine+0x1bc8/0x1c08 tcpm_state_machine_work+0x94/0xe4 kthread_worker_fn+0x118/0x328 kthread+0x1d0/0x23c ret_from_fork+0x10/0x20 To prevent the crash, check for port->partner validity before derefencing it in all the call sites. |
| CVE-2024-36892 | In the Linux kernel, the following vulnerability has been resolved: mm/slub: avoid zeroing outside-object freepointer for single free Commit 284f17ac13fe ("mm/slub: handle bulk and single object freeing separately") splits single and bulk object freeing in two functions slab_free() and slab_free_bulk() which leads slab_free() to call slab_free_hook() directly instead of slab_free_freelist_hook(). If `init_on_free` is set, slab_free_hook() zeroes the object. Afterward, if `slub_debug=F` and `CONFIG_SLAB_FREELIST_HARDENED` are set, the do_slab_free() slowpath executes freelist consistency checks and try to decode a zeroed freepointer which leads to a "Freepointer corrupt" detection in check_object(). During bulk free, slab_free_freelist_hook() isn't affected as it always sets it objects freepointer using set_freepointer() to maintain its reconstructed freelist after `init_on_free`. For single free, object's freepointer thus needs to be avoided when stored outside the object if `init_on_free` is set. The freepointer left as is, check_object() may later detect an invalid pointer value due to objects overflow. To reproduce, set `slub_debug=FU init_on_free=1 log_level=7` on the command line of a kernel build with `CONFIG_SLAB_FREELIST_HARDENED=y`. dmesg sample log: [ 10.708715] ============================================================================= [ 10.710323] BUG kmalloc-rnd-05-32 (Tainted: G B T ): Freepointer corrupt [ 10.712695] ----------------------------------------------------------------------------- [ 10.712695] [ 10.712695] Slab 0xffffd8bdc400d580 objects=32 used=4 fp=0xffff9d9a80356f80 flags=0x200000000000a00(workingset|slab|node=0|zone=2) [ 10.716698] Object 0xffff9d9a80356600 @offset=1536 fp=0x7ee4f480ce0ecd7c [ 10.716698] [ 10.716698] Bytes b4 ffff9d9a803565f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 10.720703] Object ffff9d9a80356600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 10.720703] Object ffff9d9a80356610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 10.724696] Padding ffff9d9a8035666c: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 10.724696] Padding ffff9d9a8035667c: 00 00 00 00 .... [ 10.724696] FIX kmalloc-rnd-05-32: Object at 0xffff9d9a80356600 not freed |
| CVE-2024-36891 | In the Linux kernel, the following vulnerability has been resolved: maple_tree: fix mas_empty_area_rev() null pointer dereference Currently the code calls mas_start() followed by mas_data_end() if the maple state is MA_START, but mas_start() may return with the maple state node == NULL. This will lead to a null pointer dereference when checking information in the NULL node, which is done in mas_data_end(). Avoid setting the offset if there is no node by waiting until after the maple state is checked for an empty or single entry state. A user could trigger the events to cause a kernel oops by unmapping all vmas to produce an empty maple tree, then mapping a vma that would cause the scenario described above. |
| CVE-2024-36890 | In the Linux kernel, the following vulnerability has been resolved: mm/slab: make __free(kfree) accept error pointers Currently, if an automatically freed allocation is an error pointer that will lead to a crash. An example of this is in wm831x_gpio_dbg_show(). 171 char *label __free(kfree) = gpiochip_dup_line_label(chip, i); 172 if (IS_ERR(label)) { 173 dev_err(wm831x->dev, "Failed to duplicate label\n"); 174 continue; 175 } The auto clean up function should check for error pointers as well, otherwise we're going to keep hitting issues like this. |
| CVE-2024-36889 | In the Linux kernel, the following vulnerability has been resolved: mptcp: ensure snd_nxt is properly initialized on connect Christoph reported a splat hinting at a corrupted snd_una: WARNING: CPU: 1 PID: 38 at net/mptcp/protocol.c:1005 __mptcp_clean_una+0x4b3/0x620 net/mptcp/protocol.c:1005 Modules linked in: CPU: 1 PID: 38 Comm: kworker/1:1 Not tainted 6.9.0-rc1-gbbeac67456c9 #59 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:__mptcp_clean_una+0x4b3/0x620 net/mptcp/protocol.c:1005 Code: be 06 01 00 00 bf 06 01 00 00 e8 a8 12 e7 fe e9 00 fe ff ff e8 8e 1a e7 fe 0f b7 ab 3e 02 00 00 e9 d3 fd ff ff e8 7d 1a e7 fe <0f> 0b 4c 8b bb e0 05 00 00 e9 74 fc ff ff e8 6a 1a e7 fe 0f 0b e9 RSP: 0018:ffffc9000013fd48 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8881029bd280 RCX: ffffffff82382fe4 RDX: ffff8881003cbd00 RSI: ffffffff823833c3 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888138ba8000 R13: 0000000000000106 R14: ffff8881029bd908 R15: ffff888126560000 FS: 0000000000000000(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f604a5dae38 CR3: 0000000101dac002 CR4: 0000000000170ef0 Call Trace: <TASK> __mptcp_clean_una_wakeup net/mptcp/protocol.c:1055 [inline] mptcp_clean_una_wakeup net/mptcp/protocol.c:1062 [inline] __mptcp_retrans+0x7f/0x7e0 net/mptcp/protocol.c:2615 mptcp_worker+0x434/0x740 net/mptcp/protocol.c:2767 process_one_work+0x1e0/0x560 kernel/workqueue.c:3254 process_scheduled_works kernel/workqueue.c:3335 [inline] worker_thread+0x3c7/0x640 kernel/workqueue.c:3416 kthread+0x121/0x170 kernel/kthread.c:388 ret_from_fork+0x44/0x50 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 </TASK> When fallback to TCP happens early on a client socket, snd_nxt is not yet initialized and any incoming ack will copy such value into snd_una. If the mptcp worker (dumbly) tries mptcp-level re-injection after such ack, that would unconditionally trigger a send buffer cleanup using 'bad' snd_una values. We could easily disable re-injection for fallback sockets, but such dumb behavior already helped catching a few subtle issues and a very low to zero impact in practice. Instead address the issue always initializing snd_nxt (and write_seq, for consistency) at connect time. |
| CVE-2024-36888 | In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix selection of wake_cpu in kick_pool() With cpu_possible_mask=0-63 and cpu_online_mask=0-7 the following kernel oops was observed: smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 8 CPUs Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000803 [..] Call Trace: arch_vcpu_is_preempted+0x12/0x80 select_idle_sibling+0x42/0x560 select_task_rq_fair+0x29a/0x3b0 try_to_wake_up+0x38e/0x6e0 kick_pool+0xa4/0x198 __queue_work.part.0+0x2bc/0x3a8 call_timer_fn+0x36/0x160 __run_timers+0x1e2/0x328 __run_timer_base+0x5a/0x88 run_timer_softirq+0x40/0x78 __do_softirq+0x118/0x388 irq_exit_rcu+0xc0/0xd8 do_ext_irq+0xae/0x168 ext_int_handler+0xbe/0xf0 psw_idle_exit+0x0/0xc default_idle_call+0x3c/0x110 do_idle+0xd4/0x158 cpu_startup_entry+0x40/0x48 rest_init+0xc6/0xc8 start_kernel+0x3c4/0x5e0 startup_continue+0x3c/0x50 The crash is caused by calling arch_vcpu_is_preempted() for an offline CPU. To avoid this, select the cpu with cpumask_any_and_distribute() to mask __pod_cpumask with cpu_online_mask. In case no cpu is left in the pool, skip the assignment. tj: This doesn't fully fix the bug as CPUs can still go down between picking the target CPU and the wake call. Fixing that likely requires adding cpu_online() test to either the sched or s390 arch code. However, regardless of how that is fixed, workqueue shouldn't be picking a CPU which isn't online as that would result in unpredictable and worse behavior. |
| CVE-2024-36887 | In the Linux kernel, the following vulnerability has been resolved: e1000e: change usleep_range to udelay in PHY mdic access This is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems"). The referenced commit used usleep_range inside the PHY access routines, which are sometimes called from an atomic context. This can lead to a kernel panic in some scenarios, such as cable disconnection and reconnection on vPro systems. Solve this by changing the usleep_range calls back to udelay. |
| CVE-2024-36886 | In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in error path Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported a UAF in the tipc_buf_append() error path: BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183 Read of size 8 at addr ffff88804d2a7c80 by task poc/8034 CPU: 1 PID: 8034 Comm: poc Not tainted 6.8.2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 Call Trace: <IRQ> __dump_stack linux/lib/dump_stack.c:88 dump_stack_lvl+0xd9/0x1b0 linux/lib/dump_stack.c:106 print_address_description linux/mm/kasan/report.c:377 print_report+0xc4/0x620 linux/mm/kasan/report.c:488 kasan_report+0xda/0x110 linux/mm/kasan/report.c:601 kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183 skb_release_data+0x5af/0x880 linux/net/core/skbuff.c:1026 skb_release_all linux/net/core/skbuff.c:1094 __kfree_skb linux/net/core/skbuff.c:1108 kfree_skb_reason+0x12d/0x210 linux/net/core/skbuff.c:1144 kfree_skb linux/./include/linux/skbuff.h:1244 tipc_buf_append+0x425/0xb50 linux/net/tipc/msg.c:186 tipc_link_input+0x224/0x7c0 linux/net/tipc/link.c:1324 tipc_link_rcv+0x76e/0x2d70 linux/net/tipc/link.c:1824 tipc_rcv+0x45f/0x10f0 linux/net/tipc/node.c:2159 tipc_udp_recv+0x73b/0x8f0 linux/net/tipc/udp_media.c:390 udp_queue_rcv_one_skb+0xad2/0x1850 linux/net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x131/0xb00 linux/net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x165/0x3b0 linux/net/ipv4/udp.c:2346 __udp4_lib_rcv+0x2594/0x3400 linux/net/ipv4/udp.c:2422 ip_protocol_deliver_rcu+0x30c/0x4e0 linux/net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2e4/0x520 linux/net/ipv4/ip_input.c:233 NF_HOOK linux/./include/linux/netfilter.h:314 NF_HOOK linux/./include/linux/netfilter.h:308 ip_local_deliver+0x18e/0x1f0 linux/net/ipv4/ip_input.c:254 dst_input linux/./include/net/dst.h:461 ip_rcv_finish linux/net/ipv4/ip_input.c:449 NF_HOOK linux/./include/linux/netfilter.h:314 NF_HOOK linux/./include/linux/netfilter.h:308 ip_rcv+0x2c5/0x5d0 linux/net/ipv4/ip_input.c:569 __netif_receive_skb_one_core+0x199/0x1e0 linux/net/core/dev.c:5534 __netif_receive_skb+0x1f/0x1c0 linux/net/core/dev.c:5648 process_backlog+0x101/0x6b0 linux/net/core/dev.c:5976 __napi_poll.constprop.0+0xba/0x550 linux/net/core/dev.c:6576 napi_poll linux/net/core/dev.c:6645 net_rx_action+0x95a/0xe90 linux/net/core/dev.c:6781 __do_softirq+0x21f/0x8e7 linux/kernel/softirq.c:553 do_softirq linux/kernel/softirq.c:454 do_softirq+0xb2/0xf0 linux/kernel/softirq.c:441 </IRQ> <TASK> __local_bh_enable_ip+0x100/0x120 linux/kernel/softirq.c:381 local_bh_enable linux/./include/linux/bottom_half.h:33 rcu_read_unlock_bh linux/./include/linux/rcupdate.h:851 __dev_queue_xmit+0x871/0x3ee0 linux/net/core/dev.c:4378 dev_queue_xmit linux/./include/linux/netdevice.h:3169 neigh_hh_output linux/./include/net/neighbour.h:526 neigh_output linux/./include/net/neighbour.h:540 ip_finish_output2+0x169f/0x2550 linux/net/ipv4/ip_output.c:235 __ip_finish_output linux/net/ipv4/ip_output.c:313 __ip_finish_output+0x49e/0x950 linux/net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 linux/net/ipv4/ip_output.c:323 NF_HOOK_COND linux/./include/linux/netfilter.h:303 ip_output+0x13b/0x2a0 linux/net/ipv4/ip_output.c:433 dst_output linux/./include/net/dst.h:451 ip_local_out linux/net/ipv4/ip_output.c:129 ip_send_skb+0x3e5/0x560 linux/net/ipv4/ip_output.c:1492 udp_send_skb+0x73f/0x1530 linux/net/ipv4/udp.c:963 udp_sendmsg+0x1a36/0x2b40 linux/net/ipv4/udp.c:1250 inet_sendmsg+0x105/0x140 linux/net/ipv4/af_inet.c:850 sock_sendmsg_nosec linux/net/socket.c:730 __sock_sendmsg linux/net/socket.c:745 __sys_sendto+0x42c/0x4e0 linux/net/socket.c:2191 __do_sys_sendto linux/net/socket.c:2203 __se_sys_sendto linux/net/socket.c:2199 __x64_sys_sendto+0xe0/0x1c0 linux/net/socket.c:2199 do_syscall_x64 linux/arch/x86/entry/common.c:52 do_syscall_ ---truncated--- |
| CVE-2024-36885 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/firmware: Fix SG_DEBUG error with nvkm_firmware_ctor() Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 ? srso_return_thunk+0x5/0x5f nvkm_subdev_oneinit_+0x4f/0x120 [nouveau] nvkm_subdev_init_+0x39/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f nvkm_subdev_init+0x44/0x90 [nouveau] nvkm_device_init+0x166/0x2e0 [nouveau] nvkm_udevice_init+0x47/0x70 [nouveau] nvkm_object_init+0x41/0x1c0 [nouveau] nvkm_ioctl_new+0x16a/0x290 [nouveau] ? __pfx_nvkm_client_child_new+0x10/0x10 [nouveau] ? __pfx_nvkm_udevice_new+0x10/0x10 [nouveau] nvkm_ioctl+0x126/0x290 [nouveau] nvif_object_ctor+0x112/0x190 [nouveau] nvif_device_ctor+0x23/0x60 [nouveau] nouveau_cli_init+0x164/0x640 [nouveau] nouveau_drm_device_init+0x97/0x9e0 [nouveau] ? srso_return_thunk+0x5/0x5f ? pci_update_current_state+0x72/0xb0 ? srso_return_thunk+0x5/0x5f nouveau_drm_probe+0x12c/0x280 [nouveau] ? srso_return_thunk+0x5/0x5f local_pci_probe+0x45/0xa0 pci_device_probe+0xc7/0x270 really_probe+0xe6/0x3a0 __driver_probe_device+0x87/0x160 driver_probe_device+0x1f/0xc0 __driver_attach+0xec/0x1f0 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x88/0xd0 bus_add_driver+0x116/0x220 driver_register+0x59/0x100 ? __pfx_nouveau_drm_init+0x10/0x10 [nouveau] do_one_initcall+0x5b/0x320 do_init_module+0x60/0x250 init_module_from_file+0x86/0xc0 idempotent_init_module+0x120/0x2b0 __x64_sys_finit_module+0x5e/0xb0 do_syscall_64+0x83/0x160 ? srso_return_thunk+0x5/0x5f entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7feeb5cc20cd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b cd 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffcf220b2c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055fdd2916aa0 RCX: 00007feeb5cc20cd RDX: 0000000000000000 RSI: 000055fdd29161e0 RDI: 0000000000000035 RBP: 00007ffcf220b380 R08: 00007feeb5d8fb20 R09: 00007ffcf220b310 R10: 000055fdd2909dc0 R11: 0000000000000246 R12: 000055 ---truncated--- |
| CVE-2024-36884 | In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Use the correct type in nvidia_smmu_context_fault() This was missed because of the function pointer indirection. nvidia_smmu_context_fault() is also installed as a irq function, and the 'void *' was changed to a struct arm_smmu_domain. Since the iommu_domain is embedded at a non-zero offset this causes nvidia_smmu_context_fault() to miscompute the offset. Fixup the types. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107c9f000 [0000000000000120] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 1 PID: 47 Comm: kworker/u25:0 Not tainted 6.9.0-0.rc7.58.eln136.aarch64 #1 Hardware name: Unknown NVIDIA Jetson Orin NX/NVIDIA Jetson Orin NX, BIOS 3.1-32827747 03/19/2023 Workqueue: events_unbound deferred_probe_work_func pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : nvidia_smmu_context_fault+0x1c/0x158 lr : __free_irq+0x1d4/0x2e8 sp : ffff80008044b6f0 x29: ffff80008044b6f0 x28: ffff000080a60b18 x27: ffffd32b5172e970 x26: 0000000000000000 x25: ffff0000802f5aac x24: ffff0000802f5a30 x23: ffff0000802f5b60 x22: 0000000000000057 x21: 0000000000000000 x20: ffff0000802f5a00 x19: ffff000087d4cd80 x18: ffffffffffffffff x17: 6234362066666666 x16: 6630303078302d30 x15: ffff00008156d888 x14: 0000000000000000 x13: ffff0000801db910 x12: ffff00008156d6d0 x11: 0000000000000003 x10: ffff0000801db918 x9 : ffffd32b50f94d9c x8 : 1fffe0001032fda1 x7 : ffff00008197ed00 x6 : 000000000000000f x5 : 000000000000010e x4 : 000000000000010e x3 : 0000000000000000 x2 : ffffd32b51720cd8 x1 : ffff000087e6f700 x0 : 0000000000000057 Call trace: nvidia_smmu_context_fault+0x1c/0x158 __free_irq+0x1d4/0x2e8 free_irq+0x3c/0x80 devm_free_irq+0x64/0xa8 arm_smmu_domain_free+0xc4/0x158 iommu_domain_free+0x44/0xa0 iommu_deinit_device+0xd0/0xf8 __iommu_group_remove_device+0xcc/0xe0 iommu_bus_notifier+0x64/0xa8 notifier_call_chain+0x78/0x148 blocking_notifier_call_chain+0x4c/0x90 bus_notify+0x44/0x70 device_del+0x264/0x3e8 pci_remove_bus_device+0x84/0x120 pci_remove_root_bus+0x5c/0xc0 dw_pcie_host_deinit+0x38/0xe0 tegra_pcie_config_rp+0xc0/0x1f0 tegra_pcie_dw_probe+0x34c/0x700 platform_probe+0x70/0xe8 really_probe+0xc8/0x3a0 __driver_probe_device+0x84/0x160 driver_probe_device+0x44/0x130 __device_attach_driver+0xc4/0x170 bus_for_each_drv+0x90/0x100 __device_attach+0xa8/0x1c8 device_initial_probe+0x1c/0x30 bus_probe_device+0xb0/0xc0 deferred_probe_work_func+0xbc/0x120 process_one_work+0x194/0x490 worker_thread+0x284/0x3b0 kthread+0xf4/0x108 ret_from_fork+0x10/0x20 Code: a9b97bfd 910003fd a9025bf5 f85a0035 (b94122a1) |
| CVE-2024-36883 | In the Linux kernel, the following vulnerability has been resolved: net: fix out-of-bounds access in ops_init net_alloc_generic is called by net_alloc, which is called without any locking. It reads max_gen_ptrs, which is changed under pernet_ops_rwsem. It is read twice, first to allocate an array, then to set s.len, which is later used to limit the bounds of the array access. It is possible that the array is allocated and another thread is registering a new pernet ops, increments max_gen_ptrs, which is then used to set s.len with a larger than allocated length for the variable array. Fix it by reading max_gen_ptrs only once in net_alloc_generic. If max_gen_ptrs is later incremented, it will be caught in net_assign_generic. |
| CVE-2024-36882 | In the Linux kernel, the following vulnerability has been resolved: mm: use memalloc_nofs_save() in page_cache_ra_order() See commit f2c817bed58d ("mm: use memalloc_nofs_save in readahead path"), ensure that page_cache_ra_order() do not attempt to reclaim file-backed pages too, or it leads to a deadlock, found issue when test ext4 large folio. INFO: task DataXceiver for:7494 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:DataXceiver for state:D stack:0 pid:7494 ppid:1 flags:0x00000200 Call trace: __switch_to+0x14c/0x240 __schedule+0x82c/0xdd0 schedule+0x58/0xf0 io_schedule+0x24/0xa0 __folio_lock+0x130/0x300 migrate_pages_batch+0x378/0x918 migrate_pages+0x350/0x700 compact_zone+0x63c/0xb38 compact_zone_order+0xc0/0x118 try_to_compact_pages+0xb0/0x280 __alloc_pages_direct_compact+0x98/0x248 __alloc_pages+0x510/0x1110 alloc_pages+0x9c/0x130 folio_alloc+0x20/0x78 filemap_alloc_folio+0x8c/0x1b0 page_cache_ra_order+0x174/0x308 ondemand_readahead+0x1c8/0x2b8 page_cache_async_ra+0x68/0xb8 filemap_readahead.isra.0+0x64/0xa8 filemap_get_pages+0x3fc/0x5b0 filemap_splice_read+0xf4/0x280 ext4_file_splice_read+0x2c/0x48 [ext4] vfs_splice_read.part.0+0xa8/0x118 splice_direct_to_actor+0xbc/0x288 do_splice_direct+0x9c/0x108 do_sendfile+0x328/0x468 __arm64_sys_sendfile64+0x8c/0x148 invoke_syscall+0x4c/0x118 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x4c/0x1f8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190 |
| CVE-2024-36881 | In the Linux kernel, the following vulnerability has been resolved: mm/userfaultfd: reset ptes when close() for wr-protected ones Userfaultfd unregister includes a step to remove wr-protect bits from all the relevant pgtable entries, but that only covered an explicit UFFDIO_UNREGISTER ioctl, not a close() on the userfaultfd itself. Cover that too. This fixes a WARN trace. The only user visible side effect is the user can observe leftover wr-protect bits even if the user close()ed on an userfaultfd when releasing the last reference of it. However hopefully that should be harmless, and nothing bad should happen even if so. This change is now more important after the recent page-table-check patch we merged in mm-unstable (446dd9ad37d0 ("mm/page_table_check: support userfault wr-protect entries")), as we'll do sanity check on uffd-wp bits without vma context. So it's better if we can 100% guarantee no uffd-wp bit leftovers, to make sure each report will be valid. |
| CVE-2024-36880 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: add missing firmware sanity checks Add the missing sanity checks when parsing the firmware files before downloading them to avoid accessing and corrupting memory beyond the vmalloced buffer. |
| CVE-2024-36489 | In the Linux kernel, the following vulnerability has been resolved: tls: fix missing memory barrier in tls_init In tls_init(), a write memory barrier is missing, and store-store reordering may cause NULL dereference in tls_{setsockopt,getsockopt}. CPU0 CPU1 ----- ----- // In tls_init() // In tls_ctx_create() ctx = kzalloc() ctx->sk_proto = READ_ONCE(sk->sk_prot) -(1) // In update_sk_prot() WRITE_ONCE(sk->sk_prot, tls_prots) -(2) // In sock_common_setsockopt() READ_ONCE(sk->sk_prot)->setsockopt() // In tls_{setsockopt,getsockopt}() ctx->sk_proto->setsockopt() -(3) In the above scenario, when (1) and (2) are reordered, (3) can observe the NULL value of ctx->sk_proto, causing NULL dereference. To fix it, we rely on rcu_assign_pointer() which implies the release barrier semantic. By moving rcu_assign_pointer() after ctx->sk_proto is initialized, we can ensure that ctx->sk_proto are visible when changing sk->sk_prot. |
| CVE-2024-36484 | In the Linux kernel, the following vulnerability has been resolved: net: relax socket state check at accept time. Christoph reported the following splat: WARNING: CPU: 1 PID: 772 at net/ipv4/af_inet.c:761 __inet_accept+0x1f4/0x4a0 Modules linked in: CPU: 1 PID: 772 Comm: syz-executor510 Not tainted 6.9.0-rc7-g7da7119fe22b #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:__inet_accept+0x1f4/0x4a0 net/ipv4/af_inet.c:759 Code: 04 38 84 c0 0f 85 87 00 00 00 41 c7 04 24 03 00 00 00 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ec b7 da fd <0f> 0b e9 7f fe ff ff e8 e0 b7 da fd 0f 0b e9 fe fe ff ff 89 d9 80 RSP: 0018:ffffc90000c2fc58 EFLAGS: 00010293 RAX: ffffffff836bdd14 RBX: 0000000000000000 RCX: ffff888104668000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff836bdb89 R09: fffff52000185f64 R10: dffffc0000000000 R11: fffff52000185f64 R12: dffffc0000000000 R13: 1ffff92000185f98 R14: ffff88810754d880 R15: ffff8881007b7800 FS: 000000001c772880(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb9fcf2e178 CR3: 00000001045d2002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> inet_accept+0x138/0x1d0 net/ipv4/af_inet.c:786 do_accept+0x435/0x620 net/socket.c:1929 __sys_accept4_file net/socket.c:1969 [inline] __sys_accept4+0x9b/0x110 net/socket.c:1999 __do_sys_accept net/socket.c:2016 [inline] __se_sys_accept net/socket.c:2013 [inline] __x64_sys_accept+0x7d/0x90 net/socket.c:2013 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x58/0x100 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x4315f9 Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 ab b4 fd ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdb26d9c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 0000000000400300 RCX: 00000000004315f9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00000000006e1018 R08: 0000000000400300 R09: 0000000000400300 R10: 0000000000400300 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000040cdf0 R14: 000000000040ce80 R15: 0000000000000055 </TASK> The reproducer invokes shutdown() before entering the listener status. After commit 94062790aedb ("tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets"), the above causes the child to reach the accept syscall in FIN_WAIT1 status. Eric noted we can relax the existing assertion in __inet_accept() |
| CVE-2024-36481 | In the Linux kernel, the following vulnerability has been resolved: tracing/probes: fix error check in parse_btf_field() btf_find_struct_member() might return NULL or an error via the ERR_PTR() macro. However, its caller in parse_btf_field() only checks for the NULL condition. Fix this by using IS_ERR() and returning the error up the stack. |
| CVE-2024-36479 | In the Linux kernel, the following vulnerability has been resolved: fpga: bridge: add owner module and take its refcount The current implementation of the fpga bridge assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the bridge if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_bridge struct and use it to take the module's refcount. Modify the function for registering a bridge to take an additional owner module parameter and rename it to avoid conflicts. Use the old function name for a helper macro that automatically sets the module that registers the bridge as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a bridge without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga bridge. Other changes: opportunistically move put_device() from __fpga_bridge_get() to fpga_bridge_get() and of_fpga_bridge_get() to improve code clarity since the bridge device is taken in these functions. |
| CVE-2024-36478 | In the Linux kernel, the following vulnerability has been resolved: null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues' Writing 'power' and 'submit_queues' concurrently will trigger kernel panic: Test script: modprobe null_blk nr_devices=0 mkdir -p /sys/kernel/config/nullb/nullb0 while true; do echo 1 > submit_queues; echo 4 > submit_queues; done & while true; do echo 1 > power; echo 0 > power; done Test result: BUG: kernel NULL pointer dereference, address: 0000000000000148 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:__lock_acquire+0x41d/0x28f0 Call Trace: <TASK> lock_acquire+0x121/0x450 down_write+0x5f/0x1d0 simple_recursive_removal+0x12f/0x5c0 blk_mq_debugfs_unregister_hctxs+0x7c/0x100 blk_mq_update_nr_hw_queues+0x4a3/0x720 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x79/0xf0 [null_blk] configfs_write_iter+0x119/0x1e0 vfs_write+0x326/0x730 ksys_write+0x74/0x150 This is because del_gendisk() can concurrent with blk_mq_update_nr_hw_queues(): nullb_device_power_store nullb_apply_submit_queues null_del_dev del_gendisk nullb_update_nr_hw_queues if (!dev->nullb) // still set while gendisk is deleted return 0 blk_mq_update_nr_hw_queues dev->nullb = NULL Fix this problem by resuing the global mutex to protect nullb_device_power_store() and nullb_update_nr_hw_queues() from configfs. |
| CVE-2024-36477 | In the Linux kernel, the following vulnerability has been resolved: tpm_tis_spi: Account for SPI header when allocating TPM SPI xfer buffer The TPM SPI transfer mechanism uses MAX_SPI_FRAMESIZE for computing the maximum transfer length and the size of the transfer buffer. As such, it does not account for the 4 bytes of header that prepends the SPI data frame. This can result in out-of-bounds accesses and was confirmed with KASAN. Introduce SPI_HDRSIZE to account for the header and use to allocate the transfer buffer. |
| CVE-2024-36288 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix loop termination condition in gss_free_in_token_pages() The in_token->pages[] array is not NULL terminated. This results in the following KASAN splat: KASAN: maybe wild-memory-access in range [0x04a2013400000008-0x04a201340000000f] |
| CVE-2024-36286 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu() syzbot reported that nf_reinject() could be called without rcu_read_lock() : WARNING: suspicious RCU usage 6.9.0-rc7-syzkaller-02060-g5c1672705a1a #0 Not tainted net/netfilter/nfnetlink_queue.c:263 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by syz-executor.4/13427: #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline] #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_do_batch kernel/rcu/tree.c:2190 [inline] #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_core+0xa86/0x1830 kernel/rcu/tree.c:2471 #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: nfqnl_flush net/netfilter/nfnetlink_queue.c:405 [inline] #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: instance_destroy_rcu+0x30/0x220 net/netfilter/nfnetlink_queue.c:172 stack backtrace: CPU: 0 PID: 13427 Comm: syz-executor.4 Not tainted 6.9.0-rc7-syzkaller-02060-g5c1672705a1a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nf_reinject net/netfilter/nfnetlink_queue.c:323 [inline] nfqnl_reinject+0x6ec/0x1120 net/netfilter/nfnetlink_queue.c:397 nfqnl_flush net/netfilter/nfnetlink_queue.c:410 [inline] instance_destroy_rcu+0x1ae/0x220 net/netfilter/nfnetlink_queue.c:172 rcu_do_batch kernel/rcu/tree.c:2196 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2471 handle_softirqs+0x2d6/0x990 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> |
| CVE-2024-36281 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Use mlx5_ipsec_rx_status_destroy to correctly delete status rules rx_create no longer allocates a modify_hdr instance that needs to be cleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointer dereference. A leak in the rules also previously occurred since there are now two rules populated related to status. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 109907067 P4D 109907067 PUD 116890067 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70 <snip> Call Trace: <TASK> ? show_regs+0x60/0x70 ? __die+0x24/0x70 ? page_fault_oops+0x15f/0x430 ? free_to_partial_list.constprop.0+0x79/0x150 ? do_user_addr_fault+0x2c9/0x5c0 ? exc_page_fault+0x63/0x110 ? asm_exc_page_fault+0x27/0x30 ? mlx5_modify_header_dealloc+0xd/0x70 rx_create+0x374/0x590 rx_add_rule+0x3ad/0x500 ? rx_add_rule+0x3ad/0x500 ? mlx5_cmd_exec+0x2c/0x40 ? mlx5_create_ipsec_obj+0xd6/0x200 mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0 mlx5e_xfrm_add_state+0x426/0xc00 <snip> |
| CVE-2024-36270 | In the Linux kernel, the following vulnerability has been resolved: netfilter: tproxy: bail out if IP has been disabled on the device syzbot reports: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] [..] RIP: 0010:nf_tproxy_laddr4+0xb7/0x340 net/ipv4/netfilter/nf_tproxy_ipv4.c:62 Call Trace: nft_tproxy_eval_v4 net/netfilter/nft_tproxy.c:56 [inline] nft_tproxy_eval+0xa9a/0x1a00 net/netfilter/nft_tproxy.c:168 __in_dev_get_rcu() can return NULL, so check for this. |
| CVE-2024-36244 | In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: extend minimum interval restriction to entire cycle too It is possible for syzbot to side-step the restriction imposed by the blamed commit in the Fixes: tag, because the taprio UAPI permits a cycle-time different from (and potentially shorter than) the sum of entry intervals. We need one more restriction, which is that the cycle time itself must be larger than N * ETH_ZLEN bit times, where N is the number of schedule entries. This restriction needs to apply regardless of whether the cycle time came from the user or was the implicit, auto-calculated value, so we move the existing "cycle == 0" check outside the "if "(!new->cycle_time)" branch. This way covers both conditions and scenarios. Add a selftest which illustrates the issue triggered by syzbot. |
| CVE-2024-36033 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix info leak when fetching board id Add the missing sanity check when fetching the board id to avoid leaking slab data when later requesting the firmware. |
| CVE-2024-36032 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix info leak when fetching fw build id Add the missing sanity checks and move the 255-byte build-id buffer off the stack to avoid leaking stack data through debugfs in case the build-info reply is malformed. |
| CVE-2024-36031 | In the Linux kernel, the following vulnerability has been resolved: keys: Fix overwrite of key expiration on instantiation The expiry time of a key is unconditionally overwritten during instantiation, defaulting to turn it permanent. This causes a problem for DNS resolution as the expiration set by user-space is overwritten to TIME64_MAX, disabling further DNS updates. Fix this by restoring the condition that key_set_expiry is only called when the pre-parser sets a specific expiry. |
| CVE-2024-36030 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix the double free in rvu_npc_freemem() Clang static checker(scan-build) warning： drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c:line 2184, column 2 Attempt to free released memory. npc_mcam_rsrcs_deinit() has released 'mcam->counters.bmap'. Deleted this redundant kfree() to fix this double free problem. |
| CVE-2024-36029 | In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-msm: pervent access to suspended controller Generic sdhci code registers LED device and uses host->runtime_suspended flag to protect access to it. The sdhci-msm driver doesn't set this flag, which causes a crash when LED is accessed while controller is runtime suspended. Fix this by setting the flag correctly. |
| CVE-2024-36028 | In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio() When I did memory failure tests recently, below warning occurs: DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 8 PID: 1011 at kernel/locking/lockdep.c:232 __lock_acquire+0xccb/0x1ca0 Modules linked in: mce_inject hwpoison_inject CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:__lock_acquire+0xccb/0x1ca0 RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082 RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0 RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10 R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004 FS: 00007ff9f32aa740(0000) GS:ffffa1ce5fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff9f3134ba0 CR3: 00000008484e4000 CR4: 00000000000006f0 Call Trace: <TASK> lock_acquire+0xbe/0x2d0 _raw_spin_lock_irqsave+0x3a/0x60 hugepage_subpool_put_pages.part.0+0xe/0xc0 free_huge_folio+0x253/0x3f0 dissolve_free_huge_page+0x147/0x210 __page_handle_poison+0x9/0x70 memory_failure+0x4e6/0x8c0 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x380/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xbc/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff9f3114887 RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887 RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001 RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00 </TASK> Kernel panic - not syncing: kernel: panic_on_warn set ... CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> panic+0x326/0x350 check_panic_on_warn+0x4f/0x50 __warn+0x98/0x190 report_bug+0x18e/0x1a0 handle_bug+0x3d/0x70 exc_invalid_op+0x18/0x70 asm_exc_invalid_op+0x1a/0x20 RIP: 0010:__lock_acquire+0xccb/0x1ca0 RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082 RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0 RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10 R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004 lock_acquire+0xbe/0x2d0 _raw_spin_lock_irqsave+0x3a/0x60 hugepage_subpool_put_pages.part.0+0xe/0xc0 free_huge_folio+0x253/0x3f0 dissolve_free_huge_page+0x147/0x210 __page_handle_poison+0x9/0x70 memory_failure+0x4e6/0x8c0 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x380/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xbc/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff9f3114887 RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887 RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001 RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00 </TASK> After git bisecting and digging into the code, I believe the root cause is that _deferred_list field of folio is unioned with _hugetlb_subpool field. In __update_and_free_hugetlb_folio(), folio->_deferred_ ---truncated--- |
| CVE-2024-36027 | In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: do not flag ZEROOUT on non-dirty extent buffer Btrfs clears the content of an extent buffer marked as EXTENT_BUFFER_ZONED_ZEROOUT before the bio submission. This mechanism is introduced to prevent a write hole of an extent buffer, which is once allocated, marked dirty, but turns out unnecessary and cleaned up within one transaction operation. Currently, btrfs_clear_buffer_dirty() marks the extent buffer as EXTENT_BUFFER_ZONED_ZEROOUT, and skips the entry function. If this call happens while the buffer is under IO (with the WRITEBACK flag set, without the DIRTY flag), we can add the ZEROOUT flag and clear the buffer's content just before a bio submission. As a result: 1) it can lead to adding faulty delayed reference item which leads to a FS corrupted (EUCLEAN) error, and 2) it writes out cleared tree node on disk The former issue is previously discussed in [1]. The corruption happens when it runs a delayed reference update. So, on-disk data is safe. [1] https://lore.kernel.org/linux-btrfs/3f4f2a0ff1a6c818050434288925bdcf3cd719e5.1709124777.git.naohiro.aota@wdc.com/ The latter one can reach on-disk data. But, as that node is already processed by btrfs_clear_buffer_dirty(), that will be invalidated in the next transaction commit anyway. So, the chance of hitting the corruption is relatively small. Anyway, we should skip flagging ZEROOUT on a non-DIRTY extent buffer, to keep the content under IO intact. |
| CVE-2024-36026 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11 While doing multiple S4 stress tests, GC/RLC/PMFW get into an invalid state resulting into hard hangs. Adding a GFX reset as workaround just before sending the MP1_UNLOAD message avoids this failure. |
| CVE-2024-36025 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix off by one in qla_edif_app_getstats() The app_reply->elem[] array is allocated earlier in this function and it has app_req.num_ports elements. Thus this > comparison needs to be >= to prevent memory corruption. |
| CVE-2024-36024 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Disable idle reallow as part of command/gpint execution [Why] Workaroud for a race condition where DMCUB is in the process of committing to IPS1 during the handshake causing us to miss the transition into IPS2 and touch the INBOX1 RPTR causing a HW hang. [How] Disable the reallow to ensure that we have enough of a gap between entry and exit and we're not seeing back-to-back wake_and_executes. |
| CVE-2024-36023 | In the Linux kernel, the following vulnerability has been resolved: Julia Lawall reported this null pointer dereference, this should fix it. |
| CVE-2024-36022 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Init zone device and drm client after mode-1 reset on reload In passthrough environment, when amdgpu is reloaded after unload, mode-1 is triggered after initializing the necessary IPs, That init does not include KFD, and KFD init waits until the reset is completed. KFD init is called in the reset handler, but in this case, the zone device and drm client is not initialized, causing app to create kernel panic. v2: Removing the init KFD condition from amdgpu_amdkfd_drm_client_create. As the previous version has the potential of creating DRM client twice. v3: v2 patch results in SDMA engine hung as DRM open causes VM clear to SDMA before SDMA init. Adding the condition to in drm client creation, on top of v1, to guard against drm client creation call multiple times. |
| CVE-2024-36021 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when devlink reload during pf initialization The devlink reload process will access the hardware resources, but the register operation is done before the hardware is initialized. So, processing the devlink reload during initialization may lead to kernel crash. This patch fixes this by taking devl_lock during initialization. |
| CVE-2024-36020 | In the Linux kernel, the following vulnerability has been resolved: i40e: fix vf may be used uninitialized in this function warning To fix the regression introduced by commit 52424f974bc5, which causes servers hang in very hard to reproduce conditions with resets races. Using two sources for the information is the root cause. In this function before the fix bumping v didn't mean bumping vf pointer. But the code used this variables interchangeably, so stale vf could point to different/not intended vf. Remove redundant "v" variable and iterate via single VF pointer across whole function instead to guarantee VF pointer validity. |
| CVE-2024-36019 | In the Linux kernel, the following vulnerability has been resolved: regmap: maple: Fix cache corruption in regcache_maple_drop() When keeping the upper end of a cache block entry, the entry[] array must be indexed by the offset from the base register of the block, i.e. max - mas.index. The code was indexing entry[] by only the register address, leading to an out-of-bounds access that copied some part of the kernel memory over the cache contents. This bug was not detected by the regmap KUnit test because it only tests with a block of registers starting at 0, so mas.index == 0. |
| CVE-2024-36018 | In the Linux kernel, the following vulnerability has been resolved: nouveau/uvmm: fix addr/range calcs for remap operations dEQP-VK.sparse_resources.image_rebind.2d_array.r64i.128_128_8 was causing a remap operation like the below. op_remap: prev: 0000003fffed0000 00000000000f0000 00000000a5abd18a 0000000000000000 op_remap: next: op_remap: unmap: 0000003fffed0000 0000000000100000 0 op_map: map: 0000003ffffc0000 0000000000010000 000000005b1ba33c 00000000000e0000 This was resulting in an unmap operation from 0x3fffed0000+0xf0000, 0x100000 which was corrupting the pagetables and oopsing the kernel. Fixes the prev + unmap range calcs to use start/end and map back to addr/range. |
| CVE-2024-36017 | In the Linux kernel, the following vulnerability has been resolved: rtnetlink: Correct nested IFLA_VF_VLAN_LIST attribute validation Each attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be a struct ifla_vf_vlan_info so the size of such attribute needs to be at least of sizeof(struct ifla_vf_vlan_info) which is 14 bytes. The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes) which is less than sizeof(struct ifla_vf_vlan_info) so this validation is not enough and a too small attribute might be cast to a struct ifla_vf_vlan_info, this might result in an out of bands read access when accessing the saved (casted) entry in ivvl. |
| CVE-2024-36016 | In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: fix possible out-of-bounds in gsm0_receive() Assuming the following: - side A configures the n_gsm in basic option mode - side B sends the header of a basic option mode frame with data length 1 - side A switches to advanced option mode - side B sends 2 data bytes which exceeds gsm->len Reason: gsm->len is not used in advanced option mode. - side A switches to basic option mode - side B keeps sending until gsm0_receive() writes past gsm->buf Reason: Neither gsm->state nor gsm->len have been reset after reconfiguration. Fix this by changing gsm->count to gsm->len comparison from equal to less than. Also add upper limit checks against the constant MAX_MRU in gsm0_receive() and gsm1_receive() to harden against memory corruption of gsm->len and gsm->mru. All other checks remain as we still need to limit the data according to the user configuration and actual payload size. |
| CVE-2024-36015 | In the Linux kernel, the following vulnerability has been resolved: ppdev: Add an error check in register_device In register_device, the return value of ida_simple_get is unchecked, in witch ida_simple_get will use an invalid index value. To address this issue, index should be checked after ida_simple_get. When the index value is abnormal, a warning message should be printed, the port should be dropped, and the value should be recorded. |
| CVE-2024-36014 | In the Linux kernel, the following vulnerability has been resolved: drm/arm/malidp: fix a possible null pointer dereference In malidp_mw_connector_reset, new memory is allocated with kzalloc, but no check is performed. In order to prevent null pointer dereferencing, ensure that mw_state is checked before calling __drm_atomic_helper_connector_reset. |
| CVE-2024-36013 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect() Extend a critical section to prevent chan from early freeing. Also make the l2cap_connect() return type void. Nothing is using the returned value but it is ugly to return a potentially freed pointer. Making it void will help with backports because earlier kernels did use the return value. Now the compile will break for kernels where this patch is not a complete fix. Call stack summary: [use] l2cap_bredr_sig_cmd l2cap_connect ┌ mutex_lock(&conn->chan_lock); │ chan = pchan->ops->new_connection(pchan); <- alloc chan │ __l2cap_chan_add(conn, chan); │ l2cap_chan_hold(chan); │ list_add(&chan->list, &conn->chan_l); ... (1) └ mutex_unlock(&conn->chan_lock); chan->conf_state ... (4) <- use after free [free] l2cap_conn_del ┌ mutex_lock(&conn->chan_lock); │ foreach chan in conn->chan_l: ... (2) │ l2cap_chan_put(chan); │ l2cap_chan_destroy │ kfree(chan) ... (3) <- chan freed └ mutex_unlock(&conn->chan_lock); ================================================================== BUG: KASAN: slab-use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: slab-use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0 net/bluetooth/l2cap_core.c:4260 Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311 |
| CVE-2024-36012 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: msft: fix slab-use-after-free in msft_do_close() Tying the msft->data lifetime to hdev by freeing it in hci_release_dev() to fix the following case: [use] msft_do_close() msft = hdev->msft_data; if (!msft) ...(1) <- passed. return; mutex_lock(&msft->filter_lock); ...(4) <- used after freed. [free] msft_unregister() msft = hdev->msft_data; hdev->msft_data = NULL; ...(2) kfree(msft); ...(3) <- msft is freed. ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30 kernel/locking/mutex.c:752 Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309 |
| CVE-2024-36011 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HCI: Fix potential null-ptr-deref Fix potential null-ptr-deref in hci_le_big_sync_established_evt(). |
| CVE-2024-36010 | In the Linux kernel, the following vulnerability has been resolved: igb: Fix string truncation warnings in igb_set_fw_version Commit 1978d3ead82c ("intel: fix string truncation warnings") fixes '-Wformat-truncation=' warnings in igb_main.c by using kasprintf. drivers/net/ethernet/intel/igb/igb_main.c:3092:53: warning：‘%d’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 1 and 13 [-Wformat-truncation=] 3092 | "%d.%d, 0x%08x, %d.%d.%d", | ^~ drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535] 3092 | "%d.%d, 0x%08x, %d.%d.%d", | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535] drivers/net/ethernet/intel/igb/igb_main.c:3090:25: note：‘snprintf’ output between 23 and 43 bytes into a destination of size 32 kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Fix this warning by using a larger space for adapter->fw_version, and then fall back and continue to use snprintf. |
| CVE-2024-36009 | In the Linux kernel, the following vulnerability has been resolved: ax25: Fix netdev refcount issue The dev_tracker is added to ax25_cb in ax25_bind(). When the ax25 device is detaching, the dev_tracker of ax25_cb should be deallocated in ax25_kill_by_device() instead of the dev_tracker of ax25_dev. The log reported by ref_tracker is shown below: [ 80.884935] ref_tracker: reference already released. [ 80.885150] ref_tracker: allocated in: [ 80.885349] ax25_dev_device_up+0x105/0x540 [ 80.885730] ax25_device_event+0xa4/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] __dev_notify_flags+0x138/0x280 [ 80.885730] dev_change_flags+0xd7/0x180 [ 80.885730] dev_ifsioc+0x6a9/0xa30 [ 80.885730] dev_ioctl+0x4d8/0xd90 [ 80.885730] sock_do_ioctl+0x1c2/0x2d0 [ 80.885730] sock_ioctl+0x38b/0x4f0 [ 80.885730] __se_sys_ioctl+0xad/0xf0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.885730] ref_tracker: freed in: [ 80.885730] ax25_device_event+0x272/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] dev_close_many+0x272/0x370 [ 80.885730] unregister_netdevice_many_notify+0x3b5/0x1180 [ 80.885730] unregister_netdev+0xcf/0x120 [ 80.885730] sixpack_close+0x11f/0x1b0 [ 80.885730] tty_ldisc_kill+0xcb/0x190 [ 80.885730] tty_ldisc_hangup+0x338/0x3d0 [ 80.885730] __tty_hangup+0x504/0x740 [ 80.885730] tty_release+0x46e/0xd80 [ 80.885730] __fput+0x37f/0x770 [ 80.885730] __x64_sys_close+0x7b/0xb0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.893739] ------------[ cut here ]------------ [ 80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0 [ 80.894297] Modules linked in: [ 80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd90c1a #11 [ 80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4 [ 80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0 [ 80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9 [ 80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286 [ 80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000 [ 80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518 [ 80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a [ 80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4 [ 80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518 [ 80.898279] FS: 00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000 [ 80.899436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0 ... [ 80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at [ 80.935774] ax25_bind+0x424/0x4e0 [ 80.935774] __sys_bind+0x1d9/0x270 [ 80.935774] __x64_sys_bind+0x75/0x80 [ 80.935774] do_syscall_64+0xc4/0x1b0 [ 80.935774] entry_SYSCALL_64_after_hwframe+0x67/0x6f Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb in order to mitigate the bug. |
| CVE-2024-36008 | In the Linux kernel, the following vulnerability has been resolved: ipv4: check for NULL idev in ip_route_use_hint() syzbot was able to trigger a NULL deref in fib_validate_source() in an old tree [1]. It appears the bug exists in latest trees. All calls to __in_dev_get_rcu() must be checked for a NULL result. [1] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 3257 Comm: syz-executor.3 Not tainted 5.10.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:fib_validate_source+0xbf/0x15a0 net/ipv4/fib_frontend.c:425 Code: 18 f2 f2 f2 f2 42 c7 44 20 23 f3 f3 f3 f3 48 89 44 24 78 42 c6 44 20 27 f3 e8 5d 88 48 fc 4c 89 e8 48 c1 e8 03 48 89 44 24 18 <42> 80 3c 20 00 74 08 4c 89 ef e8 d2 15 98 fc 48 89 5c 24 10 41 bf RSP: 0018:ffffc900015fee40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88800f7a4000 RCX: ffff88800f4f90c0 RDX: 0000000000000000 RSI: 0000000004001eac RDI: ffff8880160c64c0 RBP: ffffc900015ff060 R08: 0000000000000000 R09: ffff88800f7a4000 R10: 0000000000000002 R11: ffff88800f4f90c0 R12: dffffc0000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88800f7a4000 FS: 00007f938acfe6c0(0000) GS:ffff888058c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f938acddd58 CR3: 000000001248e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip_route_use_hint+0x410/0x9b0 net/ipv4/route.c:2231 ip_rcv_finish_core+0x2c4/0x1a30 net/ipv4/ip_input.c:327 ip_list_rcv_finish net/ipv4/ip_input.c:612 [inline] ip_sublist_rcv+0x3ed/0xe50 net/ipv4/ip_input.c:638 ip_list_rcv+0x422/0x470 net/ipv4/ip_input.c:673 __netif_receive_skb_list_ptype net/core/dev.c:5572 [inline] __netif_receive_skb_list_core+0x6b1/0x890 net/core/dev.c:5620 __netif_receive_skb_list net/core/dev.c:5672 [inline] netif_receive_skb_list_internal+0x9f9/0xdc0 net/core/dev.c:5764 netif_receive_skb_list+0x55/0x3e0 net/core/dev.c:5816 xdp_recv_frames net/bpf/test_run.c:257 [inline] xdp_test_run_batch net/bpf/test_run.c:335 [inline] bpf_test_run_xdp_live+0x1818/0x1d00 net/bpf/test_run.c:363 bpf_prog_test_run_xdp+0x81f/0x1170 net/bpf/test_run.c:1376 bpf_prog_test_run+0x349/0x3c0 kernel/bpf/syscall.c:3736 __sys_bpf+0x45c/0x710 kernel/bpf/syscall.c:5115 __do_sys_bpf kernel/bpf/syscall.c:5201 [inline] __se_sys_bpf kernel/bpf/syscall.c:5199 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5199 |
| CVE-2024-36007 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix warning during rehash As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b #29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> |
| CVE-2024-36006 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix incorrect list API usage Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 #39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> |
| CVE-2024-36005 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: honor table dormant flag from netdev release event path Check for table dormant flag otherwise netdev release event path tries to unregister an already unregistered hook. [524854.857999] ------------[ cut here ]------------ [524854.858010] WARNING: CPU: 0 PID: 3386599 at net/netfilter/core.c:501 __nf_unregister_net_hook+0x21a/0x260 [...] [524854.858848] CPU: 0 PID: 3386599 Comm: kworker/u32:2 Not tainted 6.9.0-rc3+ #365 [524854.858869] Workqueue: netns cleanup_net [524854.858886] RIP: 0010:__nf_unregister_net_hook+0x21a/0x260 [524854.858903] Code: 24 e8 aa 73 83 ff 48 63 43 1c 83 f8 01 0f 85 3d ff ff ff e8 98 d1 f0 ff 48 8b 3c 24 e8 8f 73 83 ff 48 63 43 1c e9 26 ff ff ff <0f> 0b 48 83 c4 18 48 c7 c7 00 68 e9 82 5b 5d 41 5c 41 5d 41 5e 41 [524854.858914] RSP: 0018:ffff8881e36d79e0 EFLAGS: 00010246 [524854.858926] RAX: 0000000000000000 RBX: ffff8881339ae790 RCX: ffffffff81ba524a [524854.858936] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8881c8a16438 [524854.858945] RBP: ffff8881c8a16438 R08: 0000000000000001 R09: ffffed103c6daf34 [524854.858954] R10: ffff8881e36d79a7 R11: 0000000000000000 R12: 0000000000000005 [524854.858962] R13: ffff8881c8a16000 R14: 0000000000000000 R15: ffff8881351b5a00 [524854.858971] FS: 0000000000000000(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [524854.858982] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [524854.858991] CR2: 00007fc9be0f16f4 CR3: 00000001437cc004 CR4: 00000000001706f0 [524854.859000] Call Trace: [524854.859006] <TASK> [524854.859013] ? __warn+0x9f/0x1a0 [524854.859027] ? __nf_unregister_net_hook+0x21a/0x260 [524854.859044] ? report_bug+0x1b1/0x1e0 [524854.859060] ? handle_bug+0x3c/0x70 [524854.859071] ? exc_invalid_op+0x17/0x40 [524854.859083] ? asm_exc_invalid_op+0x1a/0x20 [524854.859100] ? __nf_unregister_net_hook+0x6a/0x260 [524854.859116] ? __nf_unregister_net_hook+0x21a/0x260 [524854.859135] nf_tables_netdev_event+0x337/0x390 [nf_tables] [524854.859304] ? __pfx_nf_tables_netdev_event+0x10/0x10 [nf_tables] [524854.859461] ? packet_notifier+0xb3/0x360 [524854.859476] ? _raw_spin_unlock_irqrestore+0x11/0x40 [524854.859489] ? dcbnl_netdevice_event+0x35/0x140 [524854.859507] ? __pfx_nf_tables_netdev_event+0x10/0x10 [nf_tables] [524854.859661] notifier_call_chain+0x7d/0x140 [524854.859677] unregister_netdevice_many_notify+0x5e1/0xae0 |
| CVE-2024-36004 | In the Linux kernel, the following vulnerability has been resolved: i40e: Do not use WQ_MEM_RECLAIM flag for workqueue Issue reported by customer during SRIOV testing, call trace: When both i40e and the i40iw driver are loaded, a warning in check_flush_dependency is being triggered. This seems to be because of the i40e driver workqueue is allocated with the WQ_MEM_RECLAIM flag, and the i40iw one is not. Similar error was encountered on ice too and it was fixed by removing the flag. Do the same for i40e too. [Feb 9 09:08] ------------[ cut here ]------------ [ +0.000004] workqueue: WQ_MEM_RECLAIM i40e:i40e_service_task [i40e] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000060] WARNING: CPU: 0 PID: 937 at kernel/workqueue.c:2966 check_flush_dependency+0x10b/0x120 [ +0.000007] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_timer snd_seq_device snd soundcore nls_utf8 cifs cifs_arc4 nls_ucs2_utils rdma_cm iw_cm ib_cm cifs_md4 dns_resolver netfs qrtr rfkill sunrpc vfat fat intel_rapl_msr intel_rapl_common irdma intel_uncore_frequency intel_uncore_frequency_common ice ipmi_ssif isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp gnss coretemp ib_uverbs rapl intel_cstate ib_core iTCO_wdt iTCO_vendor_support acpi_ipmi mei_me ipmi_si intel_uncore ioatdma i2c_i801 joydev pcspkr mei ipmi_devintf lpc_ich intel_pch_thermal i2c_smbus ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c ast sd_mod drm_shmem_helper t10_pi drm_kms_helper sg ixgbe drm i40e ahci crct10dif_pclmul libahci crc32_pclmul igb crc32c_intel libata ghash_clmulni_intel i2c_algo_bit mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod fuse [ +0.000050] CPU: 0 PID: 937 Comm: kworker/0:3 Kdump: loaded Not tainted 6.8.0-rc2-Feb-net_dev-Qiueue-00279-gbd43c5687e05 #1 [ +0.000003] Hardware name: Intel Corporation S2600BPB/S2600BPB, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 [ +0.000001] Workqueue: i40e i40e_service_task [i40e] [ +0.000024] RIP: 0010:check_flush_dependency+0x10b/0x120 [ +0.000003] Code: ff 49 8b 54 24 18 48 8d 8b b0 00 00 00 49 89 e8 48 81 c6 b0 00 00 00 48 c7 c7 b0 97 fa 9f c6 05 8a cc 1f 02 01 e8 35 b3 fd ff <0f> 0b e9 10 ff ff ff 80 3d 78 cc 1f 02 00 75 94 e9 46 ff ff ff 90 [ +0.000002] RSP: 0018:ffffbd294976bcf8 EFLAGS: 00010282 [ +0.000002] RAX: 0000000000000000 RBX: ffff94d4c483c000 RCX: 0000000000000027 [ +0.000001] RDX: ffff94d47f620bc8 RSI: 0000000000000001 RDI: ffff94d47f620bc0 [ +0.000001] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffff7fff [ +0.000001] R10: ffffbd294976bb98 R11: ffffffffa0be65e8 R12: ffff94c5451ea180 [ +0.000001] R13: ffff94c5ab5e8000 R14: ffff94c5c20b6e05 R15: ffff94c5f1330ab0 [ +0.000001] FS: 0000000000000000(0000) GS:ffff94d47f600000(0000) knlGS:0000000000000000 [ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007f9e6f1fca70 CR3: 0000000038e20004 CR4: 00000000007706f0 [ +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000001] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000001] <TASK> [ +0.000002] ? __warn+0x80/0x130 [ +0.000003] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? report_bug+0x195/0x1a0 [ +0.000005] ? handle_bug+0x3c/0x70 [ +0.000003] ? exc_invalid_op+0x14/0x70 [ +0.000002] ? asm_exc_invalid_op+0x16/0x20 [ +0.000006] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? check_flush_dependency+0x10b/0x120 [ +0.000002] __flush_workqueue+0x126/0x3f0 [ +0.000015] ib_cache_cleanup_one+0x1c/0xe0 [ib_core] [ +0.000056] __ib_unregister_device+0x6a/0xb0 [ib_core] [ +0.000023] ib_unregister_device_and_put+0x34/0x50 [ib_core] [ +0.000020] i40iw_close+0x4b/0x90 [irdma] [ +0.000022] i40e_notify_client_of_netdev_close+0x54/0xc0 [i40e] [ +0.000035] i40e_service_task+0x126/0x190 [i40e] [ +0.000024] process_one_work+0x174/0x340 [ +0.000003] worker_th ---truncated--- |
| CVE-2024-36003 | In the Linux kernel, the following vulnerability has been resolved: ice: fix LAG and VF lock dependency in ice_reset_vf() 9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf(). The commit placed this lock acquisition just prior to the acquisition of the VF configuration lock. If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK flag, this could deadlock with ice_vc_cfg_qs_msg() because it always acquires the locks in the order of the VF configuration lock and then the LAG mutex. Lockdep reports this violation almost immediately on creating and then removing 2 VF: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-rc6 #54 Tainted: G W O ------------------------------------------------------ kworker/60:3/6771 is trying to acquire lock: ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice] but task is already holding lock: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&pf->lag_mutex){+.+.}-{3:3}: __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_vc_cfg_qs_msg+0x45/0x690 [ice] ice_vc_process_vf_msg+0x4f5/0x870 [ice] __ice_clean_ctrlq+0x2b5/0x600 [ice] ice_service_task+0x2c9/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 -> #0 (&vf->cfg_lock){+.+.}-{3:3}: check_prev_add+0xe2/0xc50 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_reset_vf+0x22f/0x4d0 [ice] ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pf->lag_mutex); lock(&vf->cfg_lock); lock(&pf->lag_mutex); lock(&vf->cfg_lock); *** DEADLOCK *** 4 locks held by kworker/60:3/6771: #0: ff40d43e05428b38 ((wq_completion)ice){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #1: ff50d06e05197e58 ((work_completion)(&pf->serv_task)){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #2: ff40d43ea1960e50 (&pf->vfs.table_lock){+.+.}-{3:3}, at: ice_process_vflr_event+0x48/0xd0 [ice] #3: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] stack backtrace: CPU: 60 PID: 6771 Comm: kworker/60:3 Tainted: G W O 6.8.0-rc6 #54 Hardware name: Workqueue: ice ice_service_task [ice] Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 check_noncircular+0x12d/0x150 check_prev_add+0xe2/0xc50 ? save_trace+0x59/0x230 ? add_chain_cache+0x109/0x450 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 ? lockdep_hardirqs_on+0x7d/0x100 lock_acquire+0xd4/0x2d0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? lock_is_held_type+0xc7/0x120 __mutex_lock+0x9b/0xbf0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? ice_reset_vf+0x22f/0x4d0 [ice] ? rcu_is_watching+0x11/0x50 ? ice_reset_vf+0x22f/0x4d0 [ice] ice_reset_vf+0x22f/0x4d0 [ice] ? process_one_work+0x176/0x4d0 ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x104/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> To avoid deadlock, we must acquire the LAG ---truncated--- |
| CVE-2024-36002 | In the Linux kernel, the following vulnerability has been resolved: dpll: fix dpll_pin_on_pin_register() for multiple parent pins In scenario where pin is registered with multiple parent pins via dpll_pin_on_pin_register(..), all belonging to the same dpll device. A second call to dpll_pin_on_pin_unregister(..) would cause a call trace, as it tries to use already released registration resources (due to fix introduced in b446631f355e). In this scenario pin was registered twice, so resources are not yet expected to be release until each registered pin/pin pair is unregistered. Currently, the following crash/call trace is produced when ice driver is removed on the system with installed E810T NIC which includes dpll device: WARNING: CPU: 51 PID: 9155 at drivers/dpll/dpll_core.c:809 dpll_pin_ops+0x20/0x30 RIP: 0010:dpll_pin_ops+0x20/0x30 Call Trace: ? __warn+0x7f/0x130 ? dpll_pin_ops+0x20/0x30 dpll_msg_add_pin_freq+0x37/0x1d0 dpll_cmd_pin_get_one+0x1c0/0x400 ? __nlmsg_put+0x63/0x80 dpll_pin_event_send+0x93/0x140 dpll_pin_on_pin_unregister+0x3f/0x100 ice_dpll_deinit_pins+0xa1/0x230 [ice] ice_remove+0xf1/0x210 [ice] Fix by adding a parent pointer as a cookie when creating a registration, also when searching for it. For the regular pins pass NULL, this allows to create separated registration for each parent the pin is registered with. |
| CVE-2024-36001 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix the pre-flush when appending to a file in writethrough mode In netfs_perform_write(), when the file is marked NETFS_ICTX_WRITETHROUGH or O_*SYNC or RWF_*SYNC was specified, write-through caching is performed on a buffered file. When setting up for write-through, we flush any conflicting writes in the region and wait for the write to complete, failing if there's a write error to return. The issue arises if we're writing at or above the EOF position because we skip the flush and - more importantly - the wait. This becomes a problem if there's a partial folio at the end of the file that is being written out and we want to make a write to it too. Both the already-running write and the write we start both want to clear the writeback mark, but whoever is second causes a warning looking something like: ------------[ cut here ]------------ R=00000012: folio 11 is not under writeback WARNING: CPU: 34 PID: 654 at fs/netfs/write_collect.c:105 ... CPU: 34 PID: 654 Comm: kworker/u386:27 Tainted: G S ... ... Workqueue: events_unbound netfs_write_collection_worker ... RIP: 0010:netfs_writeback_lookup_folio Fix this by making the flush-and-wait unconditional. It will do nothing if there are no folios in the pagecache and will return quickly if there are no folios in the region specified. Further, move the WBC attachment above the flush call as the flush is going to attach a WBC and detach it again if it is not present - and since we need one anyway we might as well share it. |
| CVE-2024-36000 | In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix missing hugetlb_lock for resv uncharge There is a recent report on UFFDIO_COPY over hugetlb: https://lore.kernel.org/all/[email protected]/ 350: lockdep_assert_held(&hugetlb_lock); Should be an issue in hugetlb but triggered in an userfault context, where it goes into the unlikely path where two threads modifying the resv map together. Mike has a fix in that path for resv uncharge but it looks like the locking criteria was overlooked: hugetlb_cgroup_uncharge_folio_rsvd() will update the cgroup pointer, so it requires to be called with the lock held. |
| CVE-2024-35999 | In the Linux kernel, the following vulnerability has been resolved: smb3: missing lock when picking channel Coverity spotted a place where we should have been holding the channel lock when accessing the ses channel index. Addresses-Coverity: 1582039 ("Data race condition (MISSING_LOCK)") |
| CVE-2024-35998 | In the Linux kernel, the following vulnerability has been resolved: smb3: fix lock ordering potential deadlock in cifs_sync_mid_result Coverity spotted that the cifs_sync_mid_result function could deadlock "Thread deadlock (ORDER_REVERSAL) lock_order: Calling spin_lock acquires lock TCP_Server_Info.srv_lock while holding lock TCP_Server_Info.mid_lock" Addresses-Coverity: 1590401 ("Thread deadlock (ORDER_REVERSAL)") |
| CVE-2024-35997 | In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up The flag I2C_HID_READ_PENDING is used to serialize I2C operations. However, this is not necessary, because I2C core already has its own locking for that. More importantly, this flag can cause a lock-up: if the flag is set in i2c_hid_xfer() and an interrupt happens, the interrupt handler (i2c_hid_irq) will check this flag and return immediately without doing anything, then the interrupt handler will be invoked again in an infinite loop. Since interrupt handler is an RT task, it takes over the CPU and the flag-clearing task never gets scheduled, thus we have a lock-up. Delete this unnecessary flag. |
| CVE-2024-35996 | In the Linux kernel, the following vulnerability has been resolved: cpu: Re-enable CPU mitigations by default for !X86 architectures Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it on for all architectures exception x86. A recent commit to turn mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta missed that "cpu_mitigations" is completely generic, whereas SPECULATION_MITIGATIONS is x86-specific. Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it select CPU_MITIGATIONS, as having two configs for the same thing is unnecessary and confusing. This will also allow x86 to use the knob to manage mitigations that aren't strictly related to speculative execution. Use another Kconfig to communicate to common code that CPU_MITIGATIONS is already defined instead of having x86's menu depend on the common CPU_MITIGATIONS. This allows keeping a single point of contact for all of x86's mitigations, and it's not clear that other architectures *want* to allow disabling mitigations at compile-time. |
| CVE-2024-35995 | In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Use access_width over bit_width for system memory accesses To align with ACPI 6.3+, since bit_width can be any 8-bit value, it cannot be depended on to be always on a clean 8b boundary. This was uncovered on the Cobalt 100 platform. SError Interrupt on CPU26, code 0xbe000011 -- SError CPU: 26 PID: 1510 Comm: systemd-udevd Not tainted 5.15.2.1-13 #1 Hardware name: MICROSOFT CORPORATION, BIOS MICROSOFT CORPORATION pstate: 62400009 (nZCv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--) pc : cppc_get_perf_caps+0xec/0x410 lr : cppc_get_perf_caps+0xe8/0x410 sp : ffff8000155ab730 x29: ffff8000155ab730 x28: ffff0080139d0038 x27: ffff0080139d0078 x26: 0000000000000000 x25: ffff0080139d0058 x24: 00000000ffffffff x23: ffff0080139d0298 x22: ffff0080139d0278 x21: 0000000000000000 x20: ffff00802b251910 x19: ffff0080139d0000 x18: ffffffffffffffff x17: 0000000000000000 x16: ffffdc7e111bad04 x15: ffff00802b251008 x14: ffffffffffffffff x13: ffff013f1fd63300 x12: 0000000000000006 x11: ffffdc7e128f4420 x10: 0000000000000000 x9 : ffffdc7e111badec x8 : ffff00802b251980 x7 : 0000000000000000 x6 : ffff0080139d0028 x5 : 0000000000000000 x4 : ffff0080139d0018 x3 : 00000000ffffffff x2 : 0000000000000008 x1 : ffff8000155ab7a0 x0 : 0000000000000000 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 26 PID: 1510 Comm: systemd-udevd Not tainted 5.15.2.1-13 #1 Hardware name: MICROSOFT CORPORATION, BIOS MICROSOFT CORPORATION Call trace: dump_backtrace+0x0/0x1e0 show_stack+0x24/0x30 dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 panic+0x16c/0x384 add_taint+0x0/0xc0 arm64_serror_panic+0x7c/0x90 arm64_is_fatal_ras_serror+0x34/0xa4 do_serror+0x50/0x6c el1h_64_error_handler+0x40/0x74 el1h_64_error+0x7c/0x80 cppc_get_perf_caps+0xec/0x410 cppc_cpufreq_cpu_init+0x74/0x400 [cppc_cpufreq] cpufreq_online+0x2dc/0xa30 cpufreq_add_dev+0xc0/0xd4 subsys_interface_register+0x134/0x14c cpufreq_register_driver+0x1b0/0x354 cppc_cpufreq_init+0x1a8/0x1000 [cppc_cpufreq] do_one_initcall+0x50/0x250 do_init_module+0x60/0x27c load_module+0x2300/0x2570 __do_sys_finit_module+0xa8/0x114 __arm64_sys_finit_module+0x2c/0x3c invoke_syscall+0x78/0x100 el0_svc_common.constprop.0+0x180/0x1a0 do_el0_svc+0x84/0xa0 el0_svc+0x2c/0xc0 el0t_64_sync_handler+0xa4/0x12c el0t_64_sync+0x1a4/0x1a8 Instead, use access_width to determine the size and use the offset and width to shift and mask the bits to read/write out. Make sure to add a check for system memory since pcc redefines the access_width to subspace id. If access_width is not set, then fall back to using bit_width. [ rjw: Subject and changelog edits, comment adjustments ] |
| CVE-2024-35994 | In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: uefisecapp: Fix memory related IO errors and crashes It turns out that while the QSEECOM APP_SEND command has specific fields for request and response buffers, uefisecapp expects them both to be in a single memory region. Failure to adhere to this has (so far) resulted in either no response being written to the response buffer (causing an EIO to be emitted down the line), the SCM call to fail with EINVAL (i.e., directly from TZ/firmware), or the device to be hard-reset. While this issue can be triggered deterministically, in the current form it seems to happen rather sporadically (which is why it has gone unnoticed during earlier testing). This is likely due to the two kzalloc() calls (for request and response) being directly after each other. Which means that those likely return consecutive regions most of the time, especially when not much else is going on in the system. Fix this by allocating a single memory region for both request and response buffers, properly aligning both structs inside it. This unfortunately also means that the qcom_scm_qseecom_app_send() interface needs to be restructured, as it should no longer map the DMA regions separately. Therefore, move the responsibility of DMA allocation (or mapping) to the caller. |
| CVE-2024-35993 | In the Linux kernel, the following vulnerability has been resolved: mm: turn folio_test_hugetlb into a PageType The current folio_test_hugetlb() can be fooled by a concurrent folio split into returning true for a folio which has never belonged to hugetlbfs. This can't happen if the caller holds a refcount on it, but we have a few places (memory-failure, compaction, procfs) which do not and should not take a speculative reference. Since hugetlb pages do not use individual page mapcounts (they are always fully mapped and use the entire_mapcount field to record the number of mappings), the PageType field is available now that page_mapcount() ignores the value in this field. In compaction and with CONFIG_DEBUG_VM enabled, the current implementation can result in an oops, as reported by Luis. This happens since 9c5ccf2db04b ("mm: remove HUGETLB_PAGE_DTOR") effectively added some VM_BUG_ON() checks in the PageHuge() testing path. [[email protected]: update vmcoreinfo] Link: https://lkml.kernel.org/r/[email protected] |
| CVE-2024-35992 | In the Linux kernel, the following vulnerability has been resolved: phy: marvell: a3700-comphy: Fix out of bounds read There is an out of bounds read access of 'gbe_phy_init_fix[fix_idx].addr' every iteration after 'fix_idx' reaches 'ARRAY_SIZE(gbe_phy_init_fix)'. Make sure 'gbe_phy_init[addr]' is used when all elements of 'gbe_phy_init_fix' array are handled. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-35991 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue drain_workqueue() cannot be called safely in a spinlocked context due to possible task rescheduling. In the multi-task scenario, calling queue_work() while drain_workqueue() will lead to a Call Trace as pushing a work on a draining workqueue is not permitted in spinlocked context. Call Trace: <TASK> ? __warn+0x7d/0x140 ? __queue_work+0x2b2/0x440 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __queue_work+0x2b2/0x440 queue_work_on+0x28/0x30 idxd_misc_thread+0x303/0x5a0 [idxd] ? __schedule+0x369/0xb40 ? __pfx_irq_thread_fn+0x10/0x10 ? irq_thread+0xbc/0x1b0 irq_thread_fn+0x21/0x70 irq_thread+0x102/0x1b0 ? preempt_count_add+0x74/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0x103/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The current implementation uses a spinlock to protect event log workqueue and will lead to the Call Trace due to potential task rescheduling. To address the locking issue, convert the spinlock to mutex, allowing the drain_workqueue() to be called in a safe mutex-locked context. This change ensures proper synchronization when accessing the event log workqueue, preventing potential Call Trace and improving the overall robustness of the code. |
| CVE-2024-35990 | In the Linux kernel, the following vulnerability has been resolved: dma: xilinx_dpdma: Fix locking There are several places where either chan->lock or chan->vchan.lock was not held. Add appropriate locking. This fixes lockdep warnings like [ 31.077578] ------------[ cut here ]------------ [ 31.077831] WARNING: CPU: 2 PID: 40 at drivers/dma/xilinx/xilinx_dpdma.c:834 xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.077953] Modules linked in: [ 31.078019] CPU: 2 PID: 40 Comm: kworker/u12:1 Not tainted 6.6.20+ #98 [ 31.078102] Hardware name: xlnx,zynqmp (DT) [ 31.078169] Workqueue: events_unbound deferred_probe_work_func [ 31.078272] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 31.078377] pc : xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.078473] lr : xilinx_dpdma_chan_queue_transfer+0x270/0x5e0 [ 31.078550] sp : ffffffc083bb2e10 [ 31.078590] x29: ffffffc083bb2e10 x28: 0000000000000000 x27: ffffff880165a168 [ 31.078754] x26: ffffff880164e920 x25: ffffff880164eab8 x24: ffffff880164d480 [ 31.078920] x23: ffffff880165a148 x22: ffffff880164e988 x21: 0000000000000000 [ 31.079132] x20: ffffffc082aa3000 x19: ffffff880164e880 x18: 0000000000000000 [ 31.079295] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 31.079453] x14: 0000000000000000 x13: ffffff8802263dc0 x12: 0000000000000001 [ 31.079613] x11: 0001ffc083bb2e34 x10: 0001ff880164e98f x9 : 0001ffc082aa3def [ 31.079824] x8 : 0001ffc082aa3dec x7 : 0000000000000000 x6 : 0000000000000516 [ 31.079982] x5 : ffffffc7f8d43000 x4 : ffffff88003c9c40 x3 : ffffffffffffffff [ 31.080147] x2 : ffffffc7f8d43000 x1 : 00000000000000c0 x0 : 0000000000000000 [ 31.080307] Call trace: [ 31.080340] xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.080518] xilinx_dpdma_issue_pending+0x11c/0x120 [ 31.080595] zynqmp_disp_layer_update+0x180/0x3ac [ 31.080712] zynqmp_dpsub_plane_atomic_update+0x11c/0x21c [ 31.080825] drm_atomic_helper_commit_planes+0x20c/0x684 [ 31.080951] drm_atomic_helper_commit_tail+0x5c/0xb0 [ 31.081139] commit_tail+0x234/0x294 [ 31.081246] drm_atomic_helper_commit+0x1f8/0x210 [ 31.081363] drm_atomic_commit+0x100/0x140 [ 31.081477] drm_client_modeset_commit_atomic+0x318/0x384 [ 31.081634] drm_client_modeset_commit_locked+0x8c/0x24c [ 31.081725] drm_client_modeset_commit+0x34/0x5c [ 31.081812] __drm_fb_helper_restore_fbdev_mode_unlocked+0x104/0x168 [ 31.081899] drm_fb_helper_set_par+0x50/0x70 [ 31.081971] fbcon_init+0x538/0xc48 [ 31.082047] visual_init+0x16c/0x23c [ 31.082207] do_bind_con_driver.isra.0+0x2d0/0x634 [ 31.082320] do_take_over_console+0x24c/0x33c [ 31.082429] do_fbcon_takeover+0xbc/0x1b0 [ 31.082503] fbcon_fb_registered+0x2d0/0x34c [ 31.082663] register_framebuffer+0x27c/0x38c [ 31.082767] __drm_fb_helper_initial_config_and_unlock+0x5c0/0x91c [ 31.082939] drm_fb_helper_initial_config+0x50/0x74 [ 31.083012] drm_fbdev_dma_client_hotplug+0xb8/0x108 [ 31.083115] drm_client_register+0xa0/0xf4 [ 31.083195] drm_fbdev_dma_setup+0xb0/0x1cc [ 31.083293] zynqmp_dpsub_drm_init+0x45c/0x4e0 [ 31.083431] zynqmp_dpsub_probe+0x444/0x5e0 [ 31.083616] platform_probe+0x8c/0x13c [ 31.083713] really_probe+0x258/0x59c [ 31.083793] __driver_probe_device+0xc4/0x224 [ 31.083878] driver_probe_device+0x70/0x1c0 [ 31.083961] __device_attach_driver+0x108/0x1e0 [ 31.084052] bus_for_each_drv+0x9c/0x100 [ 31.084125] __device_attach+0x100/0x298 [ 31.084207] device_initial_probe+0x14/0x20 [ 31.084292] bus_probe_device+0xd8/0xdc [ 31.084368] deferred_probe_work_func+0x11c/0x180 [ 31.084451] process_one_work+0x3ac/0x988 [ 31.084643] worker_thread+0x398/0x694 [ 31.084752] kthread+0x1bc/0x1c0 [ 31.084848] ret_from_fork+0x10/0x20 [ 31.084932] irq event stamp: 64549 [ 31.084970] hardirqs last enabled at (64548): [<ffffffc081adf35c>] _raw_spin_unlock_irqrestore+0x80/0x90 [ 31.085157] ---truncated--- |
| CVE-2024-35989 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix oops during rmmod on single-CPU platforms During the removal of the idxd driver, registered offline callback is invoked as part of the clean up process. However, on systems with only one CPU online, no valid target is available to migrate the perf context, resulting in a kernel oops: BUG: unable to handle page fault for address: 000000000002a2b8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 1470e1067 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 20 Comm: cpuhp/0 Not tainted 6.8.0-rc6-dsa+ #57 Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023 RIP: 0010:mutex_lock+0x2e/0x50 ... Call Trace: <TASK> __die+0x24/0x70 page_fault_oops+0x82/0x160 do_user_addr_fault+0x65/0x6b0 __pfx___rdmsr_safe_on_cpu+0x10/0x10 exc_page_fault+0x7d/0x170 asm_exc_page_fault+0x26/0x30 mutex_lock+0x2e/0x50 mutex_lock+0x1e/0x50 perf_pmu_migrate_context+0x87/0x1f0 perf_event_cpu_offline+0x76/0x90 [idxd] cpuhp_invoke_callback+0xa2/0x4f0 __pfx_perf_event_cpu_offline+0x10/0x10 [idxd] cpuhp_thread_fun+0x98/0x150 smpboot_thread_fn+0x27/0x260 smpboot_thread_fn+0x1af/0x260 __pfx_smpboot_thread_fn+0x10/0x10 kthread+0x103/0x140 __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 <TASK> Fix the issue by preventing the migration of the perf context to an invalid target. |
| CVE-2024-35988 | In the Linux kernel, the following vulnerability has been resolved: riscv: Fix TASK_SIZE on 64-bit NOMMU On NOMMU, userspace memory can come from anywhere in physical RAM. The current definition of TASK_SIZE is wrong if any RAM exists above 4G, causing spurious failures in the userspace access routines. |
| CVE-2024-35987 | In the Linux kernel, the following vulnerability has been resolved: riscv: Fix loading 64-bit NOMMU kernels past the start of RAM commit 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") added logic to allow using RAM below the kernel load address. However, this does not work for NOMMU, where PAGE_OFFSET is fixed to the kernel load address. Since that range of memory corresponds to PFNs below ARCH_PFN_OFFSET, mm initialization runs off the beginning of mem_map and corrupts adjacent kernel memory. Fix this by restoring the previous behavior for NOMMU kernels. |
| CVE-2024-35986 | In the Linux kernel, the following vulnerability has been resolved: phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered The power_supply frame-work is not really designed for there to be long living in kernel references to power_supply devices. Specifically unregistering a power_supply while some other code has a reference to it triggers a WARN in power_supply_unregister(): WARN_ON(atomic_dec_return(&psy->use_cnt)); Folllowed by the power_supply still getting removed and the backing data freed anyway, leaving the tusb1210 charger-detect code with a dangling reference, resulting in a crash the next time tusb1210_get_online() is called. Fix this by only holding the reference in tusb1210_get_online() freeing it at the end of the function. Note this still leaves a theoretical race window, but it avoids the issue when manually rmmod-ing the charger chip driver during development. |
| CVE-2024-35985 | In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf() It was possible to have pick_eevdf() return NULL, which then causes a NULL-deref. This turned out to be due to entity_eligible() returning falsely negative because of a s64 multiplcation overflow. Specifically, reweight_eevdf() computes the vlag without considering the limit placed upon vlag as update_entity_lag() does, and then the scaling multiplication (remember that weight is 20bit fixed point) can overflow. This then leads to the new vruntime being weird which then causes the above entity_eligible() to go side-ways and claim nothing is eligible. Thus limit the range of vlag accordingly. All this was quite rare, but fatal when it does happen. |
| CVE-2024-35984 | In the Linux kernel, the following vulnerability has been resolved: i2c: smbus: fix NULL function pointer dereference Baruch reported an OOPS when using the designware controller as target only. Target-only modes break the assumption of one transfer function always being available. Fix this by always checking the pointer in __i2c_transfer. [wsa: dropped the simplification in core-smbus to avoid theoretical regressions] |
| CVE-2024-35983 | In the Linux kernel, the following vulnerability has been resolved: bounds: Use the right number of bits for power-of-two CONFIG_NR_CPUS bits_per() rounds up to the next power of two when passed a power of two. This causes crashes on some machines and configurations. |
| CVE-2024-35982 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid infinite loop trying to resize local TT If the MTU of one of an attached interface becomes too small to transmit the local translation table then it must be resized to fit inside all fragments (when enabled) or a single packet. But if the MTU becomes too low to transmit even the header + the VLAN specific part then the resizing of the local TT will never succeed. This can for example happen when the usable space is 110 bytes and 11 VLANs are on top of batman-adv. In this case, at least 116 byte would be needed. There will just be an endless spam of batman_adv: batadv0: Forced to purge local tt entries to fit new maximum fragment MTU (110) in the log but the function will never finish. Problem here is that the timeout will be halved all the time and will then stagnate at 0 and therefore never be able to reduce the table even more. There are other scenarios possible with a similar result. The number of BATADV_TT_CLIENT_NOPURGE entries in the local TT can for example be too high to fit inside a packet. Such a scenario can therefore happen also with only a single VLAN + 7 non-purgable addresses - requiring at least 120 bytes. While this should be handled proactively when: * interface with too low MTU is added * VLAN is added * non-purgeable local mac is added * MTU of an attached interface is reduced * fragmentation setting gets disabled (which most likely requires dropping attached interfaces) not all of these scenarios can be prevented because batman-adv is only consuming events without the the possibility to prevent these actions (non-purgable MAC address added, MTU of an attached interface is reduced). It is therefore necessary to also make sure that the code is able to handle also the situations when there were already incompatible system configuration are present. |
| CVE-2024-35981 | In the Linux kernel, the following vulnerability has been resolved: virtio_net: Do not send RSS key if it is not supported There is a bug when setting the RSS options in virtio_net that can break the whole machine, getting the kernel into an infinite loop. Running the following command in any QEMU virtual machine with virtionet will reproduce this problem: # ethtool -X eth0 hfunc toeplitz This is how the problem happens: 1) ethtool_set_rxfh() calls virtnet_set_rxfh() 2) virtnet_set_rxfh() calls virtnet_commit_rss_command() 3) virtnet_commit_rss_command() populates 4 entries for the rss scatter-gather 4) Since the command above does not have a key, then the last scatter-gatter entry will be zeroed, since rss_key_size == 0. sg_buf_size = vi->rss_key_size; 5) This buffer is passed to qemu, but qemu is not happy with a buffer with zero length, and do the following in virtqueue_map_desc() (QEMU function): if (!sz) { virtio_error(vdev, "virtio: zero sized buffers are not allowed"); 6) virtio_error() (also QEMU function) set the device as broken vdev->broken = true; 7) Qemu bails out, and do not repond this crazy kernel. 8) The kernel is waiting for the response to come back (function virtnet_send_command()) 9) The kernel is waiting doing the following : while (!virtqueue_get_buf(vi->cvq, &tmp) && !virtqueue_is_broken(vi->cvq)) cpu_relax(); 10) None of the following functions above is true, thus, the kernel loops here forever. Keeping in mind that virtqueue_is_broken() does not look at the qemu `vdev->broken`, so, it never realizes that the vitio is broken at QEMU side. Fix it by not sending RSS commands if the feature is not available in the device. |
| CVE-2024-35980 | In the Linux kernel, the following vulnerability has been resolved: arm64: tlb: Fix TLBI RANGE operand KVM/arm64 relies on TLBI RANGE feature to flush TLBs when the dirty pages are collected by VMM and the page table entries become write protected during live migration. Unfortunately, the operand passed to the TLBI RANGE instruction isn't correctly sorted out due to the commit 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()"). It leads to crash on the destination VM after live migration because TLBs aren't flushed completely and some of the dirty pages are missed. For example, I have a VM where 8GB memory is assigned, starting from 0x40000000 (1GB). Note that the host has 4KB as the base page size. In the middile of migration, kvm_tlb_flush_vmid_range() is executed to flush TLBs. It passes MAX_TLBI_RANGE_PAGES as the argument to __kvm_tlb_flush_vmid_range() and __flush_s2_tlb_range_op(). SCALE#3 and NUM#31, corresponding to MAX_TLBI_RANGE_PAGES, isn't supported by __TLBI_RANGE_NUM(). In this specific case, -1 has been returned from __TLBI_RANGE_NUM() for SCALE#3/2/1/0 and rejected by the loop in the __flush_tlb_range_op() until the variable @scale underflows and becomes -9, 0xffff708000040000 is set as the operand. The operand is wrong since it's sorted out by __TLBI_VADDR_RANGE() according to invalid @scale and @num. Fix it by extending __TLBI_RANGE_NUM() to support the combination of SCALE#3 and NUM#31. With the changes, [-1 31] instead of [-1 30] can be returned from the macro, meaning the TLBs for 0x200000 pages in the above example can be flushed in one shoot with SCALE#3 and NUM#31. The macro TLBI_RANGE_MASK is dropped since no one uses it any more. The comments are also adjusted accordingly. |
| CVE-2024-35979 | In the Linux kernel, the following vulnerability has been resolved: raid1: fix use-after-free for original bio in raid1_write_request() r1_bio->bios[] is used to record new bios that will be issued to underlying disks, however, in raid1_write_request(), r1_bio->bios[] will set to the original bio temporarily. Meanwhile, if blocked rdev is set, free_r1bio() will be called causing that all r1_bio->bios[] to be freed: raid1_write_request() r1_bio = alloc_r1bio(mddev, bio); -> r1_bio->bios[] is NULL for (i = 0; i < disks; i++) -> for each rdev in conf // first rdev is normal r1_bio->bios[0] = bio; -> set to original bio // second rdev is blocked if (test_bit(Blocked, &rdev->flags)) break if (blocked_rdev) free_r1bio() put_all_bios() bio_put(r1_bio->bios[0]) -> original bio is freed Test scripts: mdadm -CR /dev/md0 -l1 -n4 /dev/sd[abcd] --assume-clean fio -filename=/dev/md0 -ioengine=libaio -rw=write -bs=4k -numjobs=1 \ -iodepth=128 -name=test -direct=1 echo blocked > /sys/block/md0/md/rd2/state Test result: BUG bio-264 (Not tainted): Object already free ----------------------------------------------------------------------------- Allocated in mempool_alloc_slab+0x24/0x50 age=1 cpu=1 pid=869 kmem_cache_alloc+0x324/0x480 mempool_alloc_slab+0x24/0x50 mempool_alloc+0x6e/0x220 bio_alloc_bioset+0x1af/0x4d0 blkdev_direct_IO+0x164/0x8a0 blkdev_write_iter+0x309/0x440 aio_write+0x139/0x2f0 io_submit_one+0x5ca/0xb70 __do_sys_io_submit+0x86/0x270 __x64_sys_io_submit+0x22/0x30 do_syscall_64+0xb1/0x210 entry_SYSCALL_64_after_hwframe+0x6c/0x74 Freed in mempool_free_slab+0x1f/0x30 age=1 cpu=1 pid=869 kmem_cache_free+0x28c/0x550 mempool_free_slab+0x1f/0x30 mempool_free+0x40/0x100 bio_free+0x59/0x80 bio_put+0xf0/0x220 free_r1bio+0x74/0xb0 raid1_make_request+0xadf/0x1150 md_handle_request+0xc7/0x3b0 md_submit_bio+0x76/0x130 __submit_bio+0xd8/0x1d0 submit_bio_noacct_nocheck+0x1eb/0x5c0 submit_bio_noacct+0x169/0xd40 submit_bio+0xee/0x1d0 blkdev_direct_IO+0x322/0x8a0 blkdev_write_iter+0x309/0x440 aio_write+0x139/0x2f0 Since that bios for underlying disks are not allocated yet, fix this problem by using mempool_free() directly to free the r1_bio. |
| CVE-2024-35978 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix memory leak in hci_req_sync_complete() In 'hci_req_sync_complete()', always free the previous sync request state before assigning reference to a new one. |
| CVE-2024-35977 | In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_uart: properly fix race condition The cros_ec_uart_probe() function calls devm_serdev_device_open() before it calls serdev_device_set_client_ops(). This can trigger a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ... ? ttyport_receive_buf A simplified version of crashing code is as follows: static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctrl, const u8 *data, size_t count) { struct serdev_device *serdev = ctrl->serdev; if (!serdev || !serdev->ops->receive_buf) // CRASH! return 0; return serdev->ops->receive_buf(serdev, data, count); } It assumes that if SERPORT_ACTIVE is set and serdev exists, serdev->ops will also exist. This conflicts with the existing cros_ec_uart_probe() logic, as it first calls devm_serdev_device_open() (which sets SERPORT_ACTIVE), and only later sets serdev->ops via serdev_device_set_client_ops(). Commit 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race condition") attempted to fix a similar race condition, but while doing so, made the window of error for this race condition to happen much wider. Attempt to fix the race condition again, making sure we fully setup before calling devm_serdev_device_open(). |
| CVE-2024-35976 | In the Linux kernel, the following vulnerability has been resolved: xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING syzbot reported an illegal copy in xsk_setsockopt() [1] Make sure to validate setsockopt() @optlen parameter. [1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in xsk_setsockopt+0x909/0xa40 net/xdp/xsk.c:1420 Read of size 4 at addr ffff888028c6cde3 by task syz-executor.0/7549 CPU: 0 PID: 7549 Comm: syz-executor.0 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] xsk_setsockopt+0x909/0xa40 net/xdp/xsk.c:1420 do_sock_setsockopt+0x3af/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7fb40587de69 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb40665a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007fb4059abf80 RCX: 00007fb40587de69 RDX: 0000000000000005 RSI: 000000000000011b RDI: 0000000000000006 RBP: 00007fb4058ca47a R08: 0000000000000002 R09: 0000000000000000 R10: 0000000020001980 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fb4059abf80 R15: 00007fff57ee4d08 </TASK> Allocated by task 7549: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:370 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:3966 [inline] __kmalloc+0x233/0x4a0 mm/slub.c:3979 kmalloc include/linux/slab.h:632 [inline] __cgroup_bpf_run_filter_setsockopt+0xd2f/0x1040 kernel/bpf/cgroup.c:1869 do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 The buggy address belongs to the object at ffff888028c6cde0 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 1 bytes to the right of allocated 2-byte region [ffff888028c6cde0, ffff888028c6cde2) The buggy address belongs to the physical page: page:ffffea0000a31b00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888028c6c9c0 pfn:0x28c6c anon flags: 0xfff00000000800(slab|node=0|zone=1|lastcpupid=0x7ff) page_type: 0xffffffff() raw: 00fff00000000800 ffff888014c41280 0000000000000000 dead000000000001 raw: ffff888028c6c9c0 0000000080800057 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112cc0(GFP_USER|__GFP_NOWARN|__GFP_NORETRY), pid 6648, tgid 6644 (syz-executor.0), ts 133906047828, free_ts 133859922223 set_page_owner include/linux/page_owner.h:31 [inline] post_alloc_hook+0x1ea/0x210 mm/page_alloc.c:1533 prep_new_page mm/page_alloc.c: ---truncated--- |
| CVE-2024-35975 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix transmit scheduler resource leak Inorder to support shaping and scheduling, Upon class creation Netdev driver allocates trasmit schedulers. The previous patch which added support for Round robin scheduling has a bug due to which driver is not freeing transmit schedulers post class deletion. This patch fixes the same. |
| CVE-2024-35974 | In the Linux kernel, the following vulnerability has been resolved: block: fix q->blkg_list corruption during disk rebind Multiple gendisk instances can allocated/added for single request queue in case of disk rebind. blkg may still stay in q->blkg_list when calling blkcg_init_disk() for rebind, then q->blkg_list becomes corrupted. Fix the list corruption issue by: - add blkg_init_queue() to initialize q->blkg_list & q->blkcg_mutex only - move calling blkg_init_queue() into blk_alloc_queue() The list corruption should be started since commit f1c006f1c685 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()") which delays removing blkg from q->blkg_list into blkg_free_workfn(). |
| CVE-2024-35973 | In the Linux kernel, the following vulnerability has been resolved: geneve: fix header validation in geneve[6]_xmit_skb syzbot is able to trigger an uninit-value in geneve_xmit() [1] Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield()) uses skb_protocol(skb, true), pskb_inet_may_pull() is only using skb->protocol. If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol, pskb_inet_may_pull() does nothing at all. If a vlan tag was provided by the caller (af_packet in the syzbot case), the network header might not point to the correct location, and skb linear part could be smaller than expected. Add skb_vlan_inet_prepare() to perform a complete mac validation. Use this in geneve for the moment, I suspect we need to adopt this more broadly. v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest - Only call __vlan_get_protocol() for vlan types. v2,v3 - Addressed Sabrina comments on v1 and v2 [1] BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline] BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 geneve_xmit_skb drivers/net/geneve.c:910 [inline] geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335 dev_queue_xmit include/linux/netdevice.h:3091 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 |
| CVE-2024-35972 | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init() If ulp = kzalloc() fails, the allocated edev will leak because it is not properly assigned and the cleanup path will not be able to free it. Fix it by assigning it properly immediately after allocation. |
| CVE-2024-35971 | In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Handle softirqs at the end of IRQ thread to fix hang The ks8851_irq() thread may call ks8851_rx_pkts() in case there are any packets in the MAC FIFO, which calls netif_rx(). This netif_rx() implementation is guarded by local_bh_disable() and local_bh_enable(). The local_bh_enable() may call do_softirq() to run softirqs in case any are pending. One of the softirqs is net_rx_action, which ultimately reaches the driver .start_xmit callback. If that happens, the system hangs. The entire call chain is below: ks8851_start_xmit_par from netdev_start_xmit netdev_start_xmit from dev_hard_start_xmit dev_hard_start_xmit from sch_direct_xmit sch_direct_xmit from __dev_queue_xmit __dev_queue_xmit from __neigh_update __neigh_update from neigh_update neigh_update from arp_process.constprop.0 arp_process.constprop.0 from __netif_receive_skb_one_core __netif_receive_skb_one_core from process_backlog process_backlog from __napi_poll.constprop.0 __napi_poll.constprop.0 from net_rx_action net_rx_action from __do_softirq __do_softirq from call_with_stack call_with_stack from do_softirq do_softirq from __local_bh_enable_ip __local_bh_enable_ip from netif_rx netif_rx from ks8851_irq ks8851_irq from irq_thread_fn irq_thread_fn from irq_thread irq_thread from kthread kthread from ret_from_fork The hang happens because ks8851_irq() first locks a spinlock in ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...) and with that spinlock locked, calls netif_rx(). Once the execution reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again which attempts to claim the already locked spinlock again, and the hang happens. Move the do_softirq() call outside of the spinlock protected section of ks8851_irq() by disabling BHs around the entire spinlock protected section of ks8851_irq() handler. Place local_bh_enable() outside of the spinlock protected section, so that it can trigger do_softirq() without the ks8851_par.c ks8851_lock_par() spinlock being held, and safely call ks8851_start_xmit_par() without attempting to lock the already locked spinlock. Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable() now, replace netif_rx() with __netif_rx() which is not duplicating the local_bh_disable()/local_bh_enable() calls. |
| CVE-2024-35970 | In the Linux kernel, the following vulnerability has been resolved: af_unix: Clear stale u->oob_skb. syzkaller started to report deadlock of unix_gc_lock after commit 4090fa373f0e ("af_unix: Replace garbage collection algorithm."), but it just uncovers the bug that has been there since commit 314001f0bf92 ("af_unix: Add OOB support"). The repro basically does the following. from socket import * from array import array c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) c1.sendmsg([b'a'], [(SOL_SOCKET, SCM_RIGHTS, array("i", [c2.fileno()]))], MSG_OOB) c2.recv(1) # blocked as no normal data in recv queue c2.close() # done async and unblock recv() c1.close() # done async and trigger GC A socket sends its file descriptor to itself as OOB data and tries to receive normal data, but finally recv() fails due to async close(). The problem here is wrong handling of OOB skb in manage_oob(). When recvmsg() is called without MSG_OOB, manage_oob() is called to check if the peeked skb is OOB skb. In such a case, manage_oob() pops it out of the receive queue but does not clear unix_sock(sk)->oob_skb. This is wrong in terms of uAPI. Let's say we send "hello" with MSG_OOB, and "world" without MSG_OOB. The 'o' is handled as OOB data. When recv() is called twice without MSG_OOB, the OOB data should be lost. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM, 0) >>> c1.send(b'hello', MSG_OOB) # 'o' is OOB data 5 >>> c1.send(b'world') 5 >>> c2.recv(5) # OOB data is not received b'hell' >>> c2.recv(5) # OOB date is skipped b'world' >>> c2.recv(5, MSG_OOB) # This should return an error b'o' In the same situation, TCP actually returns -EINVAL for the last recv(). Also, if we do not clear unix_sk(sk)->oob_skb, unix_poll() always set EPOLLPRI even though the data has passed through by previous recv(). To avoid these issues, we must clear unix_sk(sk)->oob_skb when dequeuing it from recv queue. The reason why the old GC did not trigger the deadlock is because the old GC relied on the receive queue to detect the loop. When it is triggered, the socket with OOB data is marked as GC candidate because file refcount == inflight count (1). However, after traversing all inflight sockets, the socket still has a positive inflight count (1), thus the socket is excluded from candidates. Then, the old GC lose the chance to garbage-collect the socket. With the old GC, the repro continues to create true garbage that will never be freed nor detected by kmemleak as it's linked to the global inflight list. That's why we couldn't even notice the issue. |
| CVE-2024-35969 | In the Linux kernel, the following vulnerability has been resolved: ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it still means hlist_for_each_entry_rcu can return an item that got removed from the list. The memory itself of such item is not freed thanks to RCU but nothing guarantees the actual content of the memory is sane. In particular, the reference count can be zero. This can happen if ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry from inet6_addr_lst (hlist_del_init_rcu(&ifp->addr_lst)) and drops all references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough timing, this can happen: 1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry. 2. Then, the whole ipv6_del_addr is executed for the given entry. The reference count drops to zero and kfree_rcu is scheduled. 3. ipv6_get_ifaddr continues and tries to increments the reference count (in6_ifa_hold). 4. The rcu is unlocked and the entry is freed. 5. The freed entry is returned. Prevent increasing of the reference count in such case. The name in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe. [ 41.506330] refcount_t: addition on 0; use-after-free. [ 41.506760] WARNING: CPU: 0 PID: 595 at lib/refcount.c:25 refcount_warn_saturate+0xa5/0x130 [ 41.507413] Modules linked in: veth bridge stp llc [ 41.507821] CPU: 0 PID: 595 Comm: python3 Not tainted 6.9.0-rc2.main-00208-g49563be82afa #14 [ 41.508479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [ 41.509163] RIP: 0010:refcount_warn_saturate+0xa5/0x130 [ 41.509586] Code: ad ff 90 0f 0b 90 90 c3 cc cc cc cc 80 3d c0 30 ad 01 00 75 a0 c6 05 b7 30 ad 01 01 90 48 c7 c7 38 cc 7a 8c e8 cc 18 ad ff 90 <0f> 0b 90 90 c3 cc cc cc cc 80 3d 98 30 ad 01 00 0f 85 75 ff ff ff [ 41.510956] RSP: 0018:ffffbda3c026baf0 EFLAGS: 00010282 [ 41.511368] RAX: 0000000000000000 RBX: ffff9e9c46914800 RCX: 0000000000000000 [ 41.511910] RDX: ffff9e9c7ec29c00 RSI: ffff9e9c7ec1c900 RDI: ffff9e9c7ec1c900 [ 41.512445] RBP: ffff9e9c43660c9c R08: 0000000000009ffb R09: 00000000ffffdfff [ 41.512998] R10: 00000000ffffdfff R11: ffffffff8ca58a40 R12: ffff9e9c4339a000 [ 41.513534] R13: 0000000000000001 R14: ffff9e9c438a0000 R15: ffffbda3c026bb48 [ 41.514086] FS: 00007fbc4cda1740(0000) GS:ffff9e9c7ec00000(0000) knlGS:0000000000000000 [ 41.514726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.515176] CR2: 000056233b337d88 CR3: 000000000376e006 CR4: 0000000000370ef0 [ 41.515713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 41.516252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 41.516799] Call Trace: [ 41.517037] <TASK> [ 41.517249] ? __warn+0x7b/0x120 [ 41.517535] ? refcount_warn_saturate+0xa5/0x130 [ 41.517923] ? report_bug+0x164/0x190 [ 41.518240] ? handle_bug+0x3d/0x70 [ 41.518541] ? exc_invalid_op+0x17/0x70 [ 41.520972] ? asm_exc_invalid_op+0x1a/0x20 [ 41.521325] ? refcount_warn_saturate+0xa5/0x130 [ 41.521708] ipv6_get_ifaddr+0xda/0xe0 [ 41.522035] inet6_rtm_getaddr+0x342/0x3f0 [ 41.522376] ? __pfx_inet6_rtm_getaddr+0x10/0x10 [ 41.522758] rtnetlink_rcv_msg+0x334/0x3d0 [ 41.523102] ? netlink_unicast+0x30f/0x390 [ 41.523445] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 41.523832] netlink_rcv_skb+0x53/0x100 [ 41.524157] netlink_unicast+0x23b/0x390 [ 41.524484] netlink_sendmsg+0x1f2/0x440 [ 41.524826] __sys_sendto+0x1d8/0x1f0 [ 41.525145] __x64_sys_sendto+0x1f/0x30 [ 41.525467] do_syscall_64+0xa5/0x1b0 [ 41.525794] entry_SYSCALL_64_after_hwframe+0x72/0x7a [ 41.526213] RIP: 0033:0x7fbc4cfcea9a [ 41.526528] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 [ 41.527942] RSP: 002b:00007f ---truncated--- |
| CVE-2024-35968 | In the Linux kernel, the following vulnerability has been resolved: pds_core: Fix pdsc_check_pci_health function to use work thread When the driver notices fw_status == 0xff it tries to perform a PCI reset on itself via pci_reset_function() in the context of the driver's health thread. However, pdsc_reset_prepare calls pdsc_stop_health_thread(), which attempts to stop/flush the health thread. This results in a deadlock because the stop/flush will never complete since the driver called pci_reset_function() from the health thread context. Fix by changing the pdsc_check_pci_health_function() to queue a newly introduced pdsc_pci_reset_thread() on the pdsc's work queue. Unloading the driver in the fw_down/dead state uncovered another issue, which can be seen in the following trace: WARNING: CPU: 51 PID: 6914 at kernel/workqueue.c:1450 __queue_work+0x358/0x440 [...] RIP: 0010:__queue_work+0x358/0x440 [...] Call Trace: <TASK> ? __warn+0x85/0x140 ? __queue_work+0x358/0x440 ? report_bug+0xfc/0x1e0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __queue_work+0x358/0x440 queue_work_on+0x28/0x30 pdsc_devcmd_locked+0x96/0xe0 [pds_core] pdsc_devcmd_reset+0x71/0xb0 [pds_core] pdsc_teardown+0x51/0xe0 [pds_core] pdsc_remove+0x106/0x200 [pds_core] pci_device_remove+0x37/0xc0 device_release_driver_internal+0xae/0x140 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xa0 pdsc_cleanup_module+0x10/0x780 [pds_core] __x64_sys_delete_module+0x142/0x2b0 ? syscall_trace_enter.isra.18+0x126/0x1a0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fbd9d03a14b [...] Fix this by preventing the devcmd reset if the FW is not running. |
| CVE-2024-35967 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix not validating setsockopt user input syzbot reported sco_sock_setsockopt() is copying data without checking user input length. BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90 net/bluetooth/sco.c:893 Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578 |
| CVE-2024-35966 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix not validating setsockopt user input syzbot reported rfcomm_sock_setsockopt_old() is copying data without checking user input length. BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt_old net/bluetooth/rfcomm/sock.c:632 [inline] BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt+0x893/0xa70 net/bluetooth/rfcomm/sock.c:673 Read of size 4 at addr ffff8880209a8bc3 by task syz-executor632/5064 |
| CVE-2024-35965 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix not validating setsockopt user input Check user input length before copying data. |
| CVE-2024-35964 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix not validating setsockopt user input Check user input length before copying data. |
| CVE-2024-35963 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Fix not validating setsockopt user input Check user input length before copying data. |
| CVE-2024-35962 | In the Linux kernel, the following vulnerability has been resolved: netfilter: complete validation of user input In my recent commit, I missed that do_replace() handlers use copy_from_sockptr() (which I fixed), followed by unsafe copy_from_sockptr_offset() calls. In all functions, we can perform the @optlen validation before even calling xt_alloc_table_info() with the following check: if ((u64)optlen < (u64)tmp.size + sizeof(tmp)) return -EINVAL; |
| CVE-2024-35961 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Register devlink first under devlink lock In case device is having a non fatal FW error during probe, the driver will report the error to user via devlink. This will trigger a WARN_ON, since mlx5 is calling devlink_register() last. In order to avoid the WARN_ON[1], change mlx5 to invoke devl_register() first under devlink lock. [1] WARNING: CPU: 5 PID: 227 at net/devlink/health.c:483 devlink_recover_notify.constprop.0+0xb8/0xc0 CPU: 5 PID: 227 Comm: kworker/u16:3 Not tainted 6.4.0-rc5_for_upstream_min_debug_2023_06_12_12_38 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_reporter_err_work [mlx5_core] RIP: 0010:devlink_recover_notify.constprop.0+0xb8/0xc0 Call Trace: <TASK> ? __warn+0x79/0x120 ? devlink_recover_notify.constprop.0+0xb8/0xc0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_recover_notify.constprop.0+0xb8/0xc0 devlink_health_report+0x4a/0x1c0 mlx5_fw_reporter_err_work+0xa4/0xd0 [mlx5_core] process_one_work+0x1bb/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x4d/0x3c0 ? process_one_work+0x3c0/0x3c0 kthread+0xc6/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> |
| CVE-2024-35960 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Properly link new fs rules into the tree Previously, add_rule_fg would only add newly created rules from the handle into the tree when they had a refcount of 1. On the other hand, create_flow_handle tries hard to find and reference already existing identical rules instead of creating new ones. These two behaviors can result in a situation where create_flow_handle 1) creates a new rule and references it, then 2) in a subsequent step during the same handle creation references it again, resulting in a rule with a refcount of 2 that is not linked into the tree, will have a NULL parent and root and will result in a crash when the flow group is deleted because del_sw_hw_rule, invoked on rule deletion, assumes node->parent is != NULL. This happened in the wild, due to another bug related to incorrect handling of duplicate pkt_reformat ids, which lead to the code in create_flow_handle incorrectly referencing a just-added rule in the same flow handle, resulting in the problem described above. Full details are at [1]. This patch changes add_rule_fg to add new rules without parents into the tree, properly initializing them and avoiding the crash. This makes it more consistent with how rules are added to an FTE in create_flow_handle. |
| CVE-2024-35959 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix mlx5e_priv_init() cleanup flow When mlx5e_priv_init() fails, the cleanup flow calls mlx5e_selq_cleanup which calls mlx5e_selq_apply() that assures that the `priv->state_lock` is held using lockdep_is_held(). Acquire the state_lock in mlx5e_selq_cleanup(). Kernel log: ============================= WARNING: suspicious RCU usage 6.8.0-rc3_net_next_841a9b5 #1 Not tainted ----------------------------- drivers/net/ethernet/mellanox/mlx5/core/en/selq.c:124 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by systemd-modules/293: #0: ffffffffa05067b0 (devices_rwsem){++++}-{3:3}, at: ib_register_client+0x109/0x1b0 [ib_core] #1: ffff8881096c65c0 (&device->client_data_rwsem){++++}-{3:3}, at: add_client_context+0x104/0x1c0 [ib_core] stack backtrace: CPU: 4 PID: 293 Comm: systemd-modules Not tainted 6.8.0-rc3_net_next_841a9b5 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x8a/0xa0 lockdep_rcu_suspicious+0x154/0x1a0 mlx5e_selq_apply+0x94/0xa0 [mlx5_core] mlx5e_selq_cleanup+0x3a/0x60 [mlx5_core] mlx5e_priv_init+0x2be/0x2f0 [mlx5_core] mlx5_rdma_setup_rn+0x7c/0x1a0 [mlx5_core] rdma_init_netdev+0x4e/0x80 [ib_core] ? mlx5_rdma_netdev_free+0x70/0x70 [mlx5_core] ipoib_intf_init+0x64/0x550 [ib_ipoib] ipoib_intf_alloc+0x4e/0xc0 [ib_ipoib] ipoib_add_one+0xb0/0x360 [ib_ipoib] add_client_context+0x112/0x1c0 [ib_core] ib_register_client+0x166/0x1b0 [ib_core] ? 0xffffffffa0573000 ipoib_init_module+0xeb/0x1a0 [ib_ipoib] do_one_initcall+0x61/0x250 do_init_module+0x8a/0x270 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x17d/0x230 __x64_sys_finit_module+0x61/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x46/0x4e </TASK> |
| CVE-2024-35958 | In the Linux kernel, the following vulnerability has been resolved: net: ena: Fix incorrect descriptor free behavior ENA has two types of TX queues: - queues which only process TX packets arriving from the network stack - queues which only process TX packets forwarded to it by XDP_REDIRECT or XDP_TX instructions The ena_free_tx_bufs() cycles through all descriptors in a TX queue and unmaps + frees every descriptor that hasn't been acknowledged yet by the device (uncompleted TX transactions). The function assumes that the processed TX queue is necessarily from the first category listed above and ends up using napi_consume_skb() for descriptors belonging to an XDP specific queue. This patch solves a bug in which, in case of a VF reset, the descriptors aren't freed correctly, leading to crashes. |
| CVE-2024-35957 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix WARN_ON in iommu probe path Commit 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed devices") adds all devices probed by the iommu driver in a rbtree indexed by the source ID of each device. It assumes that each device has a unique source ID. This assumption is incorrect and the VT-d spec doesn't state this requirement either. The reason for using a rbtree to track devices is to look up the device with PCI bus and devfunc in the paths of handling ATS invalidation time out error and the PRI I/O page faults. Both are PCI ATS feature related. Only track the devices that have PCI ATS capabilities in the rbtree to avoid unnecessary WARN_ON in the iommu probe path. Otherwise, on some platforms below kernel splat will be displayed and the iommu probe results in failure. WARNING: CPU: 3 PID: 166 at drivers/iommu/intel/iommu.c:158 intel_iommu_probe_device+0x319/0xd90 Call Trace: <TASK> ? __warn+0x7e/0x180 ? intel_iommu_probe_device+0x319/0xd90 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? intel_iommu_probe_device+0x319/0xd90 ? debug_mutex_init+0x37/0x50 __iommu_probe_device+0xf2/0x4f0 iommu_probe_device+0x22/0x70 iommu_bus_notifier+0x1e/0x40 notifier_call_chain+0x46/0x150 blocking_notifier_call_chain+0x42/0x60 bus_notify+0x2f/0x50 device_add+0x5ed/0x7e0 platform_device_add+0xf5/0x240 mfd_add_devices+0x3f9/0x500 ? preempt_count_add+0x4c/0xa0 ? up_write+0xa2/0x1b0 ? __debugfs_create_file+0xe3/0x150 intel_lpss_probe+0x49f/0x5b0 ? pci_conf1_write+0xa3/0xf0 intel_lpss_pci_probe+0xcf/0x110 [intel_lpss_pci] pci_device_probe+0x95/0x120 really_probe+0xd9/0x370 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x73/0x150 driver_probe_device+0x19/0xa0 __driver_attach+0xb6/0x180 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x77/0xd0 bus_add_driver+0x114/0x210 driver_register+0x5b/0x110 ? __pfx_intel_lpss_pci_driver_init+0x10/0x10 [intel_lpss_pci] do_one_initcall+0x57/0x2b0 ? kmalloc_trace+0x21e/0x280 ? do_init_module+0x1e/0x210 do_init_module+0x5f/0x210 load_module+0x1d37/0x1fc0 ? init_module_from_file+0x86/0xd0 init_module_from_file+0x86/0xd0 idempotent_init_module+0x17c/0x230 __x64_sys_finit_module+0x56/0xb0 do_syscall_64+0x6e/0x140 entry_SYSCALL_64_after_hwframe+0x71/0x79 |
| CVE-2024-35956 | In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction. However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation. The fix is to ensure that every qgroup PREALLOC reservation observes the following properties: 1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation. This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row. |
| CVE-2024-35955 | In the Linux kernel, the following vulnerability has been resolved: kprobes: Fix possible use-after-free issue on kprobe registration When unloading a module, its state is changing MODULE_STATE_LIVE -> MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take a time. `is_module_text_address()` and `__module_text_address()` works with MODULE_STATE_LIVE and MODULE_STATE_GOING. If we use `is_module_text_address()` and `__module_text_address()` separately, there is a chance that the first one is succeeded but the next one is failed because module->state becomes MODULE_STATE_UNFORMED between those operations. In `check_kprobe_address_safe()`, if the second `__module_text_address()` is failed, that is ignored because it expected a kernel_text address. But it may have failed simply because module->state has been changed to MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify non-exist module text address (use-after-free). To fix this problem, we should not use separated `is_module_text_address()` and `__module_text_address()`, but use only `__module_text_address()` once and do `try_module_get(module)` which is only available with MODULE_STATE_LIVE. |
| CVE-2024-35954 | In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Avoid sg device teardown race sg_remove_sfp_usercontext() must not use sg_device_destroy() after calling scsi_device_put(). sg_device_destroy() is accessing the parent scsi_device request_queue which will already be set to NULL when the preceding call to scsi_device_put() removed the last reference to the parent scsi_device. The resulting NULL pointer exception will then crash the kernel. |
| CVE-2024-35953 | In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix deadlock in context_xa ivpu_device->context_xa is locked both in kernel thread and IRQ context. It requires XA_FLAGS_LOCK_IRQ flag to be passed during initialization otherwise the lock could be acquired from a thread and interrupted by an IRQ that locks it for the second time causing the deadlock. This deadlock was reported by lockdep and observed in internal tests. |
| CVE-2024-35952 | In the Linux kernel, the following vulnerability has been resolved: drm/ast: Fix soft lockup There is a while-loop in ast_dp_set_on_off() that could lead to infinite-loop. This is because the register, VGACRI-Dx, checked in this API is a scratch register actually controlled by a MCU, named DPMCU, in BMC. These scratch registers are protected by scu-lock. If suc-lock is not off, DPMCU can not update these registers and then host will have soft lockup due to never updated status. DPMCU is used to control DP and relative registers to handshake with host's VGA driver. Even the most time-consuming task, DP's link training, is less than 100ms. 200ms should be enough. |
| CVE-2024-35951 | In the Linux kernel, the following vulnerability has been resolved: drm/panfrost: Fix the error path in panfrost_mmu_map_fault_addr() Subject: [PATCH] drm/panfrost: Fix the error path in panfrost_mmu_map_fault_addr() If some the pages or sgt allocation failed, we shouldn't release the pages ref we got earlier, otherwise we will end up with unbalanced get/put_pages() calls. We should instead leave everything in place and let the BO release function deal with extra cleanup when the object is destroyed, or let the fault handler try again next time it's called. |
| CVE-2024-35950 | In the Linux kernel, the following vulnerability has been resolved: drm/client: Fully protect modes[] with dev->mode_config.mutex The modes[] array contains pointers to modes on the connectors' mode lists, which are protected by dev->mode_config.mutex. Thus we need to extend modes[] the same protection or by the time we use it the elements may already be pointing to freed/reused memory. |
| CVE-2024-35949 | In the Linux kernel, the following vulnerability has been resolved: btrfs: make sure that WRITTEN is set on all metadata blocks We previously would call btrfs_check_leaf() if we had the check integrity code enabled, which meant that we could only run the extended leaf checks if we had WRITTEN set on the header flags. This leaves a gap in our checking, because we could end up with corruption on disk where WRITTEN isn't set on the leaf, and then the extended leaf checks don't get run which we rely on to validate all of the item pointers to make sure we don't access memory outside of the extent buffer. However, since 732fab95abe2 ("btrfs: check-integrity: remove CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only ever call it on blocks that are being written out, and thus have WRITTEN set, or that are being read in, which should have WRITTEN set. Add checks to make sure we have WRITTEN set appropriately, and then make sure __btrfs_check_leaf() always does the item checking. This will protect us from file systems that have been corrupted and no longer have WRITTEN set on some of the blocks. This was hit on a crafted image tweaking the WRITTEN bit and reported by KASAN as out-of-bound access in the eb accessors. The example is a dir item at the end of an eb. [2.042] BTRFS warning (device loop1): bad eb member start: ptr 0x3fff start 30572544 member offset 16410 size 2 [2.040] general protection fault, probably for non-canonical address 0xe0009d1000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI [2.537] KASAN: maybe wild-memory-access in range [0x0005088000000018-0x000508800000001f] [2.729] CPU: 0 PID: 2587 Comm: mount Not tainted 6.8.2 #1 [2.729] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [2.621] RIP: 0010:btrfs_get_16+0x34b/0x6d0 [2.621] RSP: 0018:ffff88810871fab8 EFLAGS: 00000206 [2.621] RAX: 0000a11000000003 RBX: ffff888104ff8720 RCX: ffff88811b2288c0 [2.621] RDX: dffffc0000000000 RSI: ffffffff81dd8aca RDI: ffff88810871f748 [2.621] RBP: 000000000000401a R08: 0000000000000001 R09: ffffed10210e3ee9 [2.621] R10: ffff88810871f74f R11: 205d323430333737 R12: 000000000000001a [2.621] R13: 000508800000001a R14: 1ffff110210e3f5d R15: ffffffff850011e8 [2.621] FS: 00007f56ea275840(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 [2.621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2.621] CR2: 00007febd13b75c0 CR3: 000000010bb50000 CR4: 00000000000006f0 [2.621] Call Trace: [2.621] <TASK> [2.621] ? show_regs+0x74/0x80 [2.621] ? die_addr+0x46/0xc0 [2.621] ? exc_general_protection+0x161/0x2a0 [2.621] ? asm_exc_general_protection+0x26/0x30 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? btrfs_get_16+0x34b/0x6d0 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? __pfx_btrfs_get_16+0x10/0x10 [2.621] ? __pfx_mutex_unlock+0x10/0x10 [2.621] btrfs_match_dir_item_name+0x101/0x1a0 [2.621] btrfs_lookup_dir_item+0x1f3/0x280 [2.621] ? __pfx_btrfs_lookup_dir_item+0x10/0x10 [2.621] btrfs_get_tree+0xd25/0x1910 [ copy more details from report ] |
| CVE-2024-35948 | In the Linux kernel, the following vulnerability has been resolved: bcachefs: Check for journal entries overruning end of sb clean section Fix a missing bounds check in superblock validation. Note that we don't yet have repair code for this case - repair code for individual items is generally low priority, since the whole superblock is checksummed, validated prior to write, and we have backups. |
| CVE-2024-35947 | In the Linux kernel, the following vulnerability has been resolved: dyndbg: fix old BUG_ON in >control parser Fix a BUG_ON from 2009. Even if it looks "unreachable" (I didn't really look), lets make sure by removing it, doing pr_err and return -EINVAL instead. |
| CVE-2024-35946 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix null pointer access when abort scan During cancel scan we might use vif that weren't scanning. Fix this by using the actual scanning vif. |
| CVE-2024-35945 | In the Linux kernel, the following vulnerability has been resolved: net: phy: phy_device: Prevent nullptr exceptions on ISR If phydev->irq is set unconditionally, check for valid interrupt handler or fall back to polling mode to prevent nullptr exceptions in interrupt service routine. |
| CVE-2024-35944 | In the Linux kernel, the following vulnerability has been resolved: VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host() Syzkaller hit 'WARNING in dg_dispatch_as_host' bug. memcpy: detected field-spanning write (size 56) of single field "&dg_info->msg" at drivers/misc/vmw_vmci/vmci_datagram.c:237 (size 24) WARNING: CPU: 0 PID: 1555 at drivers/misc/vmw_vmci/vmci_datagram.c:237 dg_dispatch_as_host+0x88e/0xa60 drivers/misc/vmw_vmci/vmci_datagram.c:237 Some code commentry, based on my understanding: 544 #define VMCI_DG_SIZE(_dg) (VMCI_DG_HEADERSIZE + (size_t)(_dg)->payload_size) /// This is 24 + payload_size memcpy(&dg_info->msg, dg, dg_size); Destination = dg_info->msg ---> this is a 24 byte structure(struct vmci_datagram) Source = dg --> this is a 24 byte structure (struct vmci_datagram) Size = dg_size = 24 + payload_size {payload_size = 56-24 =32} -- Syzkaller managed to set payload_size to 32. 35 struct delayed_datagram_info { 36 struct datagram_entry *entry; 37 struct work_struct work; 38 bool in_dg_host_queue; 39 /* msg and msg_payload must be together. */ 40 struct vmci_datagram msg; 41 u8 msg_payload[]; 42 }; So those extra bytes of payload are copied into msg_payload[], a run time warning is seen while fuzzing with Syzkaller. One possible way to fix the warning is to split the memcpy() into two parts -- one -- direct assignment of msg and second taking care of payload. Gustavo quoted: "Under FORTIFY_SOURCE we should not copy data across multiple members in a structure." |
| CVE-2024-35943 | In the Linux kernel, the following vulnerability has been resolved: pmdomain: ti: Add a null pointer check to the omap_prm_domain_init devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. |
| CVE-2024-35942 | In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain According to i.MX8MP RM and HDMI ADD, the fdcc clock is part of hdmi rx verification IP that should not enable for HDMI TX. But actually if the clock is disabled before HDMI/LCDIF probe, LCDIF will not get pixel clock from HDMI PHY and print the error logs: [CRTC:39:crtc-2] vblank wait timed out WARNING: CPU: 2 PID: 9 at drivers/gpu/drm/drm_atomic_helper.c:1634 drm_atomic_helper_wait_for_vblanks.part.0+0x23c/0x260 Add fdcc clock to LCDIF and HDMI TX power domains to fix the issue. |
| CVE-2024-35940 | In the Linux kernel, the following vulnerability has been resolved: pstore/zone: Add a null pointer check to the psz_kmsg_read kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. |
| CVE-2024-35939 | In the Linux kernel, the following vulnerability has been resolved: dma-direct: Leak pages on dma_set_decrypted() failure On TDX it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. DMA could free decrypted/shared pages if dma_set_decrypted() fails. This should be a rare case. Just leak the pages in this case instead of freeing them. |
| CVE-2024-35938 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: decrease MHI channel buffer length to 8KB Currently buf_len field of ath11k_mhi_config_qca6390 is assigned with 0, making MHI use a default size, 64KB, to allocate channel buffers. This is likely to fail in some scenarios where system memory is highly fragmented and memory compaction or reclaim is not allowed. There is a fail report which is caused by it: kworker/u32:45: page allocation failure: order:4, mode:0x40c00(GFP_NOIO|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 0 PID: 19318 Comm: kworker/u32:45 Not tainted 6.8.0-rc3-1.gae4495f-default #1 openSUSE Tumbleweed (unreleased) 493b6d5b382c603654d7a81fc3c144d59a1dfceb Workqueue: events_unbound async_run_entry_fn Call Trace: <TASK> dump_stack_lvl+0x47/0x60 warn_alloc+0x13a/0x1b0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __alloc_pages_direct_compact+0xab/0x210 __alloc_pages_slowpath.constprop.0+0xd3e/0xda0 __alloc_pages+0x32d/0x350 ? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] __kmalloc_large_node+0x72/0x110 __kmalloc+0x37c/0x480 ? mhi_map_single_no_bb+0x77/0xf0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] ? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] __mhi_prepare_for_transfer+0x44/0x80 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] ? __pfx_____mhi_prepare_for_transfer+0x10/0x10 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] device_for_each_child+0x5c/0xa0 ? __pfx_pci_pm_resume+0x10/0x10 ath11k_core_resume+0x65/0x100 [ath11k a5094e22d7223135c40d93c8f5321cf09fd85e4e] ? srso_alias_return_thunk+0x5/0xfbef5 ath11k_pci_pm_resume+0x32/0x60 [ath11k_pci 830b7bfc3ea80ebef32e563cafe2cb55e9cc73ec] ? srso_alias_return_thunk+0x5/0xfbef5 dpm_run_callback+0x8c/0x1e0 device_resume+0x104/0x340 ? __pfx_dpm_watchdog_handler+0x10/0x10 async_resume+0x1d/0x30 async_run_entry_fn+0x32/0x120 process_one_work+0x168/0x330 worker_thread+0x2f5/0x410 ? __pfx_worker_thread+0x10/0x10 kthread+0xe8/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Actually those buffers are used only by QMI target -> host communication. And for WCN6855 and QCA6390, the largest packet size for that is less than 6KB. So change buf_len field to 8KB, which results in order 1 allocation if page size is 4KB. In this way, we can at least save some memory, and as well as decrease the possibility of allocation failure in those scenarios. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 |
| CVE-2024-35937 | In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: check A-MSDU format more carefully If it looks like there's another subframe in the A-MSDU but the header isn't fully there, we can end up reading data out of bounds, only to discard later. Make this a bit more careful and check if the subframe header can even be present. |
| CVE-2024-35936 | In the Linux kernel, the following vulnerability has been resolved: btrfs: handle chunk tree lookup error in btrfs_relocate_sys_chunks() The unhandled case in btrfs_relocate_sys_chunks() loop is a corruption, as it could be caused only by two impossible conditions: - at first the search key is set up to look for a chunk tree item, with offset -1, this is an inexact search and the key->offset will contain the correct offset upon a successful search, a valid chunk tree item cannot have an offset -1 - after first successful search, the found_key corresponds to a chunk item, the offset is decremented by 1 before the next loop, it's impossible to find a chunk item there due to alignment and size constraints |
| CVE-2024-35935 | In the Linux kernel, the following vulnerability has been resolved: btrfs: send: handle path ref underflow in header iterate_inode_ref() Change BUG_ON to proper error handling if building the path buffer fails. The pointers are not printed so we don't accidentally leak kernel addresses. |
| CVE-2024-35934 | In the Linux kernel, the following vulnerability has been resolved: net/smc: reduce rtnl pressure in smc_pnet_create_pnetids_list() Many syzbot reports show extreme rtnl pressure, and many of them hint that smc acquires rtnl in netns creation for no good reason [1] This patch returns early from smc_pnet_net_init() if there is no netdevice yet. I am not even sure why smc_pnet_create_pnetids_list() even exists, because smc_pnet_netdev_event() is also calling smc_pnet_add_base_pnetid() when handling NETDEV_UP event. [1] extract of typical syzbot reports 2 locks held by syz-executor.3/12252: #0: ffffffff8f369610 (pernet_ops_rwsem){++++}-{3:3}, at: copy_net_ns+0x4c7/0x7b0 net/core/net_namespace.c:491 #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_create_pnetids_list net/smc/smc_pnet.c:809 [inline] #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_net_init+0x10a/0x1e0 net/smc/smc_pnet.c:878 2 locks held by syz-executor.4/12253: #0: ffffffff8f369610 (pernet_ops_rwsem){++++}-{3:3}, at: copy_net_ns+0x4c7/0x7b0 net/core/net_namespace.c:491 #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_create_pnetids_list net/smc/smc_pnet.c:809 [inline] #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_net_init+0x10a/0x1e0 net/smc/smc_pnet.c:878 2 locks held by syz-executor.1/12257: #0: ffffffff8f369610 (pernet_ops_rwsem){++++}-{3:3}, at: copy_net_ns+0x4c7/0x7b0 net/core/net_namespace.c:491 #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_create_pnetids_list net/smc/smc_pnet.c:809 [inline] #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_net_init+0x10a/0x1e0 net/smc/smc_pnet.c:878 2 locks held by syz-executor.2/12261: #0: ffffffff8f369610 (pernet_ops_rwsem){++++}-{3:3}, at: copy_net_ns+0x4c7/0x7b0 net/core/net_namespace.c:491 #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_create_pnetids_list net/smc/smc_pnet.c:809 [inline] #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_net_init+0x10a/0x1e0 net/smc/smc_pnet.c:878 2 locks held by syz-executor.0/12265: #0: ffffffff8f369610 (pernet_ops_rwsem){++++}-{3:3}, at: copy_net_ns+0x4c7/0x7b0 net/core/net_namespace.c:491 #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_create_pnetids_list net/smc/smc_pnet.c:809 [inline] #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_net_init+0x10a/0x1e0 net/smc/smc_pnet.c:878 2 locks held by syz-executor.3/12268: #0: ffffffff8f369610 (pernet_ops_rwsem){++++}-{3:3}, at: copy_net_ns+0x4c7/0x7b0 net/core/net_namespace.c:491 #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_create_pnetids_list net/smc/smc_pnet.c:809 [inline] #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_net_init+0x10a/0x1e0 net/smc/smc_pnet.c:878 2 locks held by syz-executor.4/12271: #0: ffffffff8f369610 (pernet_ops_rwsem){++++}-{3:3}, at: copy_net_ns+0x4c7/0x7b0 net/core/net_namespace.c:491 #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_create_pnetids_list net/smc/smc_pnet.c:809 [inline] #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_net_init+0x10a/0x1e0 net/smc/smc_pnet.c:878 2 locks held by syz-executor.1/12274: #0: ffffffff8f369610 (pernet_ops_rwsem){++++}-{3:3}, at: copy_net_ns+0x4c7/0x7b0 net/core/net_namespace.c:491 #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_create_pnetids_list net/smc/smc_pnet.c:809 [inline] #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_net_init+0x10a/0x1e0 net/smc/smc_pnet.c:878 2 locks held by syz-executor.2/12280: #0: ffffffff8f369610 (pernet_ops_rwsem){++++}-{3:3}, at: copy_net_ns+0x4c7/0x7b0 net/core/net_namespace.c:491 #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_create_pnetids_list net/smc/smc_pnet.c:809 [inline] #1: ffffffff8f375b88 (rtnl_mutex){+.+.}-{3:3}, at: smc_pnet_net_init+0x10a/0x1e0 net/smc/smc_pnet.c:878 |
| CVE-2024-35933 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Fix null ptr deref in btintel_read_version If hci_cmd_sync_complete() is triggered and skb is NULL, then hdev->req_skb is NULL, which will cause this issue. |
| CVE-2024-35932 | In the Linux kernel, the following vulnerability has been resolved: drm/vc4: don't check if plane->state->fb == state->fb Currently, when using non-blocking commits, we can see the following kernel warning: [ 110.908514] ------------[ cut here ]------------ [ 110.908529] refcount_t: underflow; use-after-free. [ 110.908620] WARNING: CPU: 0 PID: 1866 at lib/refcount.c:87 refcount_dec_not_one+0xb8/0xc0 [ 110.908664] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash aes_arm64 aes_generic algif_skcipher af_alg bnep hid_logitech_hidpp vc4 brcmfmac hci_uart btbcm brcmutil bluetooth snd_soc_hdmi_codec cfg80211 cec drm_display_helper drm_dma_helper drm_kms_helper snd_soc_core snd_compress snd_pcm_dmaengine fb_sys_fops sysimgblt syscopyarea sysfillrect raspberrypi_hwmon ecdh_generic ecc rfkill libaes i2c_bcm2835 binfmt_misc joydev snd_bcm2835(C) bcm2835_codec(C) bcm2835_isp(C) v4l2_mem2mem videobuf2_dma_contig snd_pcm bcm2835_v4l2(C) raspberrypi_gpiomem bcm2835_mmal_vchiq(C) videobuf2_v4l2 snd_timer videobuf2_vmalloc videobuf2_memops videobuf2_common snd videodev vc_sm_cma(C) mc hid_logitech_dj uio_pdrv_genirq uio i2c_dev drm fuse dm_mod drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 110.909086] CPU: 0 PID: 1866 Comm: kodi.bin Tainted: G C 6.1.66-v8+ #32 [ 110.909104] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 110.909114] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 110.909132] pc : refcount_dec_not_one+0xb8/0xc0 [ 110.909152] lr : refcount_dec_not_one+0xb4/0xc0 [ 110.909170] sp : ffffffc00913b9c0 [ 110.909177] x29: ffffffc00913b9c0 x28: 000000556969bbb0 x27: 000000556990df60 [ 110.909205] x26: 0000000000000002 x25: 0000000000000004 x24: ffffff8004448480 [ 110.909230] x23: ffffff800570b500 x22: ffffff802e03a7bc x21: ffffffecfca68c78 [ 110.909257] x20: ffffff8002b42000 x19: ffffff802e03a600 x18: 0000000000000000 [ 110.909283] x17: 0000000000000011 x16: ffffffffffffffff x15: 0000000000000004 [ 110.909308] x14: 0000000000000fff x13: ffffffed577e47e0 x12: 0000000000000003 [ 110.909333] x11: 0000000000000000 x10: 0000000000000027 x9 : c912d0d083728c00 [ 110.909359] x8 : c912d0d083728c00 x7 : 65646e75203a745f x6 : 746e756f63666572 [ 110.909384] x5 : ffffffed579f62ee x4 : ffffffed579eb01e x3 : 0000000000000000 [ 110.909409] x2 : 0000000000000000 x1 : ffffffc00913b750 x0 : 0000000000000001 [ 110.909434] Call trace: [ 110.909441] refcount_dec_not_one+0xb8/0xc0 [ 110.909461] vc4_bo_dec_usecnt+0x4c/0x1b0 [vc4] [ 110.909903] vc4_cleanup_fb+0x44/0x50 [vc4] [ 110.910315] drm_atomic_helper_cleanup_planes+0x88/0xa4 [drm_kms_helper] [ 110.910669] vc4_atomic_commit_tail+0x390/0x9dc [vc4] [ 110.911079] commit_tail+0xb0/0x164 [drm_kms_helper] [ 110.911397] drm_atomic_helper_commit+0x1d0/0x1f0 [drm_kms_helper] [ 110.911716] drm_atomic_commit+0xb0/0xdc [drm] [ 110.912569] drm_mode_atomic_ioctl+0x348/0x4b8 [drm] [ 110.913330] drm_ioctl_kernel+0xec/0x15c [drm] [ 110.914091] drm_ioctl+0x24c/0x3b0 [drm] [ 110.914850] __arm64_sys_ioctl+0x9c/0xd4 [ 110.914873] invoke_syscall+0x4c/0x114 [ 110.914897] el0_svc_common+0xd0/0x118 [ 110.914917] do_el0_svc+0x38/0xd0 [ 110.914936] el0_svc+0x30/0x8c [ 110.914958] el0t_64_sync_handler+0x84/0xf0 [ 110.914979] el0t_64_sync+0x18c/0x190 [ 110.914996] ---[ end trace 0000000000000000 ]--- This happens because, although `prepare_fb` and `cleanup_fb` are perfectly balanced, we cannot guarantee consistency in the check plane->state->fb == state->fb. This means that sometimes we can increase the refcount in `prepare_fb` and don't decrease it in `cleanup_fb`. The opposite can also be true. In fact, the struct drm_plane .state shouldn't be accessed directly but instead, the `drm_atomic_get_new_plane_state()` helper function should be used. So, we could stick to this check, but using `drm_atomic_get_new_plane_state()`. But actually, this check is not re ---truncated--- |
| CVE-2024-35931 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Skip do PCI error slot reset during RAS recovery Why: The PCI error slot reset maybe triggered after inject ue to UMC multi times, this caused system hang. [ 557.371857] amdgpu 0000:af:00.0: amdgpu: GPU reset succeeded, trying to resume [ 557.373718] [drm] PCIE GART of 512M enabled. [ 557.373722] [drm] PTB located at 0x0000031FED700000 [ 557.373788] [drm] VRAM is lost due to GPU reset! [ 557.373789] [drm] PSP is resuming... [ 557.547012] mlx5_core 0000:55:00.0: mlx5_pci_err_detected Device state = 1 pci_status: 0. Exit, result = 3, need reset [ 557.547067] [drm] PCI error: detected callback, state(1)!! [ 557.547069] [drm] No support for XGMI hive yet... [ 557.548125] mlx5_core 0000:55:00.0: mlx5_pci_slot_reset Device state = 1 pci_status: 0. Enter [ 557.607763] mlx5_core 0000:55:00.0: wait vital counter value 0x16b5b after 1 iterations [ 557.607777] mlx5_core 0000:55:00.0: mlx5_pci_slot_reset Device state = 1 pci_status: 1. Exit, err = 0, result = 5, recovered [ 557.610492] [drm] PCI error: slot reset callback!! ... [ 560.689382] amdgpu 0000:3f:00.0: amdgpu: GPU reset(2) succeeded! [ 560.689546] amdgpu 0000:5a:00.0: amdgpu: GPU reset(2) succeeded! [ 560.689562] general protection fault, probably for non-canonical address 0x5f080b54534f611f: 0000 [#1] SMP NOPTI [ 560.701008] CPU: 16 PID: 2361 Comm: kworker/u448:9 Tainted: G OE 5.15.0-91-generic #101-Ubuntu [ 560.712057] Hardware name: Microsoft C278A/C278A, BIOS C2789.5.BS.1C11.AG.1 11/08/2023 [ 560.720959] Workqueue: amdgpu-reset-hive amdgpu_ras_do_recovery [amdgpu] [ 560.728887] RIP: 0010:amdgpu_device_gpu_recover.cold+0xbf1/0xcf5 [amdgpu] [ 560.736891] Code: ff 41 89 c6 e9 1b ff ff ff 44 0f b6 45 b0 e9 4f ff ff ff be 01 00 00 00 4c 89 e7 e8 76 c9 8b ff 44 0f b6 45 b0 e9 3c fd ff ff <48> 83 ba 18 02 00 00 00 0f 84 6a f8 ff ff 48 8d 7a 78 be 01 00 00 [ 560.757967] RSP: 0018:ffa0000032e53d80 EFLAGS: 00010202 [ 560.763848] RAX: ffa00000001dfd10 RBX: ffa0000000197090 RCX: ffa0000032e53db0 [ 560.771856] RDX: 5f080b54534f5f07 RSI: 0000000000000000 RDI: ff11000128100010 [ 560.779867] RBP: ffa0000032e53df0 R08: 0000000000000000 R09: ffffffffffe77f08 [ 560.787879] R10: 0000000000ffff0a R11: 0000000000000001 R12: 0000000000000000 [ 560.795889] R13: ffa0000032e53e00 R14: 0000000000000000 R15: 0000000000000000 [ 560.803889] FS: 0000000000000000(0000) GS:ff11007e7e800000(0000) knlGS:0000000000000000 [ 560.812973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 560.819422] CR2: 000055a04c118e68 CR3: 0000000007410005 CR4: 0000000000771ee0 [ 560.827433] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 560.835433] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 560.843444] PKRU: 55555554 [ 560.846480] Call Trace: [ 560.849225] <TASK> [ 560.851580] ? show_trace_log_lvl+0x1d6/0x2ea [ 560.856488] ? show_trace_log_lvl+0x1d6/0x2ea [ 560.861379] ? amdgpu_ras_do_recovery+0x1b2/0x210 [amdgpu] [ 560.867778] ? show_regs.part.0+0x23/0x29 [ 560.872293] ? __die_body.cold+0x8/0xd [ 560.876502] ? die_addr+0x3e/0x60 [ 560.880238] ? exc_general_protection+0x1c5/0x410 [ 560.885532] ? asm_exc_general_protection+0x27/0x30 [ 560.891025] ? amdgpu_device_gpu_recover.cold+0xbf1/0xcf5 [amdgpu] [ 560.898323] amdgpu_ras_do_recovery+0x1b2/0x210 [amdgpu] [ 560.904520] process_one_work+0x228/0x3d0 How: In RAS recovery, mode-1 reset is issued from RAS fatal error handling and expected all the nodes in a hive to be reset. no need to issue another mode-1 during this procedure. |
| CVE-2024-35930 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix possible memory leak in lpfc_rcv_padisc() The call to lpfc_sli4_resume_rpi() in lpfc_rcv_padisc() may return an unsuccessful status. In such cases, the elsiocb is not issued, the completion is not called, and thus the elsiocb resource is leaked. Check return value after calling lpfc_sli4_resume_rpi() and conditionally release the elsiocb resource. |
| CVE-2024-35929 | In the Linux kernel, the following vulnerability has been resolved: rcu/nocb: Fix WARN_ON_ONCE() in the rcu_nocb_bypass_lock() For the kernels built with CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y and CONFIG_RCU_LAZY=y, the following scenarios will trigger WARN_ON_ONCE() in the rcu_nocb_bypass_lock() and rcu_nocb_wait_contended() functions: CPU2 CPU11 kthread rcu_nocb_cb_kthread ksys_write rcu_do_batch vfs_write rcu_torture_timer_cb proc_sys_write __kmem_cache_free proc_sys_call_handler kmemleak_free drop_caches_sysctl_handler delete_object_full drop_slab __delete_object shrink_slab put_object lazy_rcu_shrink_scan call_rcu rcu_nocb_flush_bypass __call_rcu_commn rcu_nocb_bypass_lock raw_spin_trylock(&rdp->nocb_bypass_lock) fail atomic_inc(&rdp->nocb_lock_contended); rcu_nocb_wait_contended WARN_ON_ONCE(smp_processor_id() != rdp->cpu); WARN_ON_ONCE(atomic_read(&rdp->nocb_lock_contended)) | |_ _ _ _ _ _ _ _ _ _same rdp and rdp->cpu != 11_ _ _ _ _ _ _ _ _ __| Reproduce this bug with "echo 3 > /proc/sys/vm/drop_caches". This commit therefore uses rcu_nocb_try_flush_bypass() instead of rcu_nocb_flush_bypass() in lazy_rcu_shrink_scan(). If the nocb_bypass queue is being flushed, then rcu_nocb_try_flush_bypass will return directly. |
| CVE-2024-35928 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: Fix potential ioremap() memory leaks in amdgpu_device_init() This ensures that the memory mapped by ioremap for adev->rmmio, is properly handled in amdgpu_device_init(). If the function exits early due to an error, the memory is unmapped. If the function completes successfully, the memory remains mapped. Reported by smatch: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:4337 amdgpu_device_init() warn: 'adev->rmmio' from ioremap() not released on lines: 4035,4045,4051,4058,4068,4337 |
| CVE-2024-35927 | In the Linux kernel, the following vulnerability has been resolved: drm: Check output polling initialized before disabling In drm_kms_helper_poll_disable() check if output polling support is initialized before disabling polling. If not flag this as a warning. Additionally in drm_mode_config_helper_suspend() and drm_mode_config_helper_resume() calls, that re the callers of these functions, avoid invoking them if polling is not initialized. For drivers like hyperv-drm, that do not initialize connector polling, if suspend is called without this check, it leads to suspend failure with following stack [ 770.719392] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 770.720592] printk: Suspending console(s) (use no_console_suspend to debug) [ 770.948823] ------------[ cut here ]------------ [ 770.948824] WARNING: CPU: 1 PID: 17197 at kernel/workqueue.c:3162 __flush_work.isra.0+0x212/0x230 [ 770.948831] Modules linked in: rfkill nft_counter xt_conntrack xt_owner udf nft_compat crc_itu_t nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink vfat fat mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common kvm_amd ccp mlxfw kvm psample hyperv_drm tls drm_shmem_helper drm_kms_helper irqbypass pcspkr syscopyarea sysfillrect sysimgblt hv_balloon hv_utils joydev drm fuse xfs libcrc32c pci_hyperv pci_hyperv_intf sr_mod sd_mod cdrom t10_pi sg hv_storvsc scsi_transport_fc hv_netvsc serio_raw hyperv_keyboard hid_hyperv crct10dif_pclmul crc32_pclmul crc32c_intel hv_vmbus ghash_clmulni_intel dm_mirror dm_region_hash dm_log dm_mod [ 770.948863] CPU: 1 PID: 17197 Comm: systemd-sleep Not tainted 5.14.0-362.2.1.el9_3.x86_64 #1 [ 770.948865] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 770.948866] RIP: 0010:__flush_work.isra.0+0x212/0x230 [ 770.948869] Code: 8b 4d 00 4c 8b 45 08 89 ca 48 c1 e9 04 83 e2 08 83 e1 0f 83 ca 02 89 c8 48 0f ba 6d 00 03 e9 25 ff ff ff 0f 0b e9 4e ff ff ff <0f> 0b 45 31 ed e9 44 ff ff ff e8 8f 89 b2 00 66 66 2e 0f 1f 84 00 [ 770.948870] RSP: 0018:ffffaf4ac213fb10 EFLAGS: 00010246 [ 770.948871] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8c992857 [ 770.948872] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff9aad82b00330 [ 770.948873] RBP: ffff9aad82b00330 R08: 0000000000000000 R09: ffff9aad87ee3d10 [ 770.948874] R10: 0000000000000200 R11: 0000000000000000 R12: ffff9aad82b00330 [ 770.948874] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 [ 770.948875] FS: 00007ff1b2f6bb40(0000) GS:ffff9aaf37d00000(0000) knlGS:0000000000000000 [ 770.948878] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 770.948878] CR2: 0000555f345cb666 CR3: 00000001462dc005 CR4: 0000000000370ee0 [ 770.948879] Call Trace: [ 770.948880] <TASK> [ 770.948881] ? show_trace_log_lvl+0x1c4/0x2df [ 770.948884] ? show_trace_log_lvl+0x1c4/0x2df [ 770.948886] ? __cancel_work_timer+0x103/0x190 [ 770.948887] ? __flush_work.isra.0+0x212/0x230 [ 770.948889] ? __warn+0x81/0x110 [ 770.948891] ? __flush_work.isra.0+0x212/0x230 [ 770.948892] ? report_bug+0x10a/0x140 [ 770.948895] ? handle_bug+0x3c/0x70 [ 770.948898] ? exc_invalid_op+0x14/0x70 [ 770.948899] ? asm_exc_invalid_op+0x16/0x20 [ 770.948903] ? __flush_work.isra.0+0x212/0x230 [ 770.948905] __cancel_work_timer+0x103/0x190 [ 770.948907] ? _raw_spin_unlock_irqrestore+0xa/0x30 [ 770.948910] drm_kms_helper_poll_disable+0x1e/0x40 [drm_kms_helper] [ 770.948923] drm_mode_config_helper_suspend+0x1c/0x80 [drm_kms_helper] [ 770.948933] ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus] [ 770.948942] hyperv_vmbus_suspend+0x17/0x40 [hyperv_drm] [ 770.948944] ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus] [ 770.948951] dpm_run_callback+0x4c/0x140 [ 770.948954] __device_suspend_noir ---truncated--- |
| CVE-2024-35926 | In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix async_disable descriptor leak The disable_async paths of iaa_compress/decompress() don't free idxd descriptors in the async_disable case. Currently this only happens in the testcases where req->dst is set to null. Add a test to free them in those paths. |
| CVE-2024-35925 | In the Linux kernel, the following vulnerability has been resolved: block: prevent division by zero in blk_rq_stat_sum() The expression dst->nr_samples + src->nr_samples may have zero value on overflow. It is necessary to add a check to avoid division by zero. Found by Linux Verification Center (linuxtesting.org) with Svace. |
| CVE-2024-35924 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Limit read size on v1.2 Between UCSI 1.2 and UCSI 2.0, the size of the MESSAGE_IN region was increased from 16 to 256. In order to avoid overflowing reads for older systems, add a mechanism to use the read UCSI version to truncate read sizes on UCSI v1.2. |
| CVE-2024-35922 | In the Linux kernel, the following vulnerability has been resolved: fbmon: prevent division by zero in fb_videomode_from_videomode() The expression htotal * vtotal can have a zero value on overflow. It is necessary to prevent division by zero like in fb_var_to_videomode(). Found by Linux Verification Center (linuxtesting.org) with Svace. |
| CVE-2024-35921 | In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix oops when HEVC init fails The stateless HEVC decoder saves the instance pointer in the context regardless if the initialization worked or not. This caused a use after free, when the pointer is freed in case of a failure in the deinit function. Only store the instance pointer when the initialization was successful, to solve this issue. Hardware name: Acer Tomato (rev3 - 4) board (DT) pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] lr : vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] sp : ffff80008750bc20 x29: ffff80008750bc20 x28: ffff1299f6d70000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff80008750bc98 x22: 000000000000a003 x21: ffffd45c4cfae000 x20: 0000000000000010 x19: ffff1299fd668310 x18: 000000000000001a x17: 000000040044ffff x16: ffffd45cb15dc648 x15: 0000000000000000 x14: ffff1299c08da1c0 x13: ffffd45cb1f87a10 x12: ffffd45cb2f5fe80 x11: 0000000000000001 x10: 0000000000001b30 x9 : ffffd45c4d12b488 x8 : 1fffe25339380d81 x7 : 0000000000000001 x6 : ffff1299c9c06c00 x5 : 0000000000000132 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000010 x1 : ffff80008750bc98 x0 : 0000000000000000 Call trace: vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] vpu_dec_deinit+0x1c/0x30 [mtk_vcodec_dec] vdec_hevc_slice_deinit+0x30/0x98 [mtk_vcodec_dec] vdec_if_deinit+0x38/0x68 [mtk_vcodec_dec] mtk_vcodec_dec_release+0x20/0x40 [mtk_vcodec_dec] fops_vcodec_release+0x64/0x118 [mtk_vcodec_dec] v4l2_release+0x7c/0x100 __fput+0x80/0x2d8 __fput_sync+0x58/0x70 __arm64_sys_close+0x40/0x90 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0xd8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x1a8/0x1b0 Code: d503201f f9401660 b900127f b900227f (f9400400) |
| CVE-2024-35920 | In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: adding lock to protect decoder context list Add a lock for the ctx_list, to avoid accessing a NULL pointer within the 'vpu_dec_ipi_handler' function when the ctx_list has been deleted due to an unexpected behavior on the SCP IP block. Hardware name: Google juniper sku16 board (DT) pstate: 20400005 (nzCv daif +PAN -UAO -TCO BTYPE=--) pc : vpu_dec_ipi_handler+0x58/0x1f8 [mtk_vcodec_dec] lr : scp_ipi_handler+0xd0/0x194 [mtk_scp] sp : ffffffc0131dbbd0 x29: ffffffc0131dbbd0 x28: 0000000000000000 x27: ffffff9bb277f348 x26: ffffff9bb242ad00 x25: ffffffd2d440d3b8 x24: ffffffd2a13ff1d4 x23: ffffff9bb7fe85a0 x22: ffffffc0133fbdb0 x21: 0000000000000010 x20: ffffff9b050ea328 x19: ffffffc0131dbc08 x18: 0000000000001000 x17: 0000000000000000 x16: ffffffd2d461c6e0 x15: 0000000000000242 x14: 000000000000018f x13: 000000000000004d x12: 0000000000000000 x11: 0000000000000001 x10: fffffffffffffff0 x9 : ffffff9bb6e793a8 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : fffffffffffffff0 x3 : 0000000000000020 x2 : ffffff9bb6e79080 x1 : 0000000000000010 x0 : ffffffc0131dbc08 Call trace: vpu_dec_ipi_handler+0x58/0x1f8 [mtk_vcodec_dec (HASH:6c3f 2)] scp_ipi_handler+0xd0/0x194 [mtk_scp (HASH:7046 3)] mt8183_scp_irq_handler+0x44/0x88 [mtk_scp (HASH:7046 3)] scp_irq_handler+0x48/0x90 [mtk_scp (HASH:7046 3)] irq_thread_fn+0x38/0x94 irq_thread+0x100/0x1c0 kthread+0x140/0x1fc ret_from_fork+0x10/0x30 Code: 54000088 f94ca50a eb14015f 54000060 (f9400108) ---[ end trace ace43ce36cbd5c93 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: 0x12c4000000 from 0xffffffc010000000 PHYS_OFFSET: 0xffffffe580000000 CPU features: 0x08240002,2188200c Memory Limit: none |
| CVE-2024-35919 | In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: adding lock to protect encoder context list Add a lock for the ctx_list, to avoid accessing a NULL pointer within the 'vpu_enc_ipi_handler' function when the ctx_list has been deleted due to an unexpected behavior on the SCP IP block. |
| CVE-2024-35917 | In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Fix bpf_plt pointer arithmetic Kui-Feng Lee reported a crash on s390x triggered by the dummy_st_ops/dummy_init_ptr_arg test [1]: [<0000000000000002>] 0x2 [<00000000009d5cde>] bpf_struct_ops_test_run+0x156/0x250 [<000000000033145a>] __sys_bpf+0xa1a/0xd00 [<00000000003319dc>] __s390x_sys_bpf+0x44/0x50 [<0000000000c4382c>] __do_syscall+0x244/0x300 [<0000000000c59a40>] system_call+0x70/0x98 This is caused by GCC moving memcpy() after assignments in bpf_jit_plt(), resulting in NULL pointers being written instead of the return and the target addresses. Looking at the GCC internals, the reordering is allowed because the alias analysis thinks that the memcpy() destination and the assignments' left-hand-sides are based on different objects: new_plt and bpf_plt_ret/bpf_plt_target respectively, and therefore they cannot alias. This is in turn due to a violation of the C standard: When two pointers are subtracted, both shall point to elements of the same array object, or one past the last element of the array object ... From the C's perspective, bpf_plt_ret and bpf_plt are distinct objects and cannot be subtracted. In the practical terms, doing so confuses the GCC's alias analysis. The code was written this way in order to let the C side know a few offsets defined in the assembly. While nice, this is by no means necessary. Fix the noncompliance by hardcoding these offsets. [1] https://lore.kernel.org/bpf/[email protected]/ |
| CVE-2024-35916 | In the Linux kernel, the following vulnerability has been resolved: dma-buf: Fix NULL pointer dereference in sanitycheck() If due to a memory allocation failure mock_chain() returns NULL, it is passed to dma_fence_enable_sw_signaling() resulting in NULL pointer dereference there. Call dma_fence_enable_sw_signaling() only if mock_chain() succeeds. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-35915 | In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet syzbot reported the following uninit-value access issue [1][2]: nci_rx_work() parses and processes received packet. When the payload length is zero, each message type handler reads uninitialized payload and KMSAN detects this issue. The receipt of a packet with a zero-size payload is considered unexpected, and therefore, such packets should be silently discarded. This patch resolved this issue by checking payload size before calling each message type handler codes. |
| CVE-2024-35914 | In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix error cleanup path in nfsd_rename() Commit a8b0026847b8 ("rename(): avoid a deadlock in the case of parents having no common ancestor") added an error bail out path. However this path does not drop the remount protection that has been acquired. Fix the cleanup path to properly drop the remount protection. |
| CVE-2024-35913 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIF When we want to know whether we should look for the mac_id or the link_id in struct iwl_mvm_session_prot_notif, we should look at the version of SESSION_PROTECTION_NOTIF. This causes WARNINGs: WARNING: CPU: 0 PID: 11403 at drivers/net/wireless/intel/iwlwifi/mvm/time-event.c:959 iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] RIP: 0010:iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] Code: 00 49 c7 84 24 48 07 00 00 00 00 00 00 41 c6 84 24 78 07 00 00 ff 4c 89 f7 e8 e9 71 54 d9 e9 7d fd ff ff 0f 0b e9 23 fe ff ff <0f> 0b e9 1c fe ff ff 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffb4bb00003d40 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff9ae63a361000 RCX: ffff9ae4a98b60d4 RDX: ffff9ae4588499c0 RSI: 0000000000000305 RDI: ffff9ae4a98b6358 RBP: ffffb4bb00003d68 R08: 0000000000000003 R09: 0000000000000010 R10: ffffb4bb00003d00 R11: 000000000000000f R12: ffff9ae441399050 R13: ffff9ae4761329e8 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9ae7af400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fb75680018 CR3: 00000003dae32006 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <IRQ> ? show_regs+0x69/0x80 ? __warn+0x8d/0x150 ? iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] ? report_bug+0x196/0x1c0 ? handle_bug+0x45/0x80 ? exc_invalid_op+0x1c/0xb0 ? asm_exc_invalid_op+0x1f/0x30 ? iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] iwl_mvm_rx_common+0x115/0x340 [iwlmvm] iwl_mvm_rx_mq+0xa6/0x100 [iwlmvm] iwl_pcie_rx_handle+0x263/0xa10 [iwlwifi] iwl_pcie_napi_poll_msix+0x32/0xd0 [iwlwifi] |
| CVE-2024-35912 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: rfi: fix potential response leaks If the rx payload length check fails, or if kmemdup() fails, we still need to free the command response. Fix that. |
| CVE-2024-35911 | In the Linux kernel, the following vulnerability has been resolved: ice: fix memory corruption bug with suspend and rebuild The ice driver would previously panic after suspend. This is caused from the driver *only* calling the ice_vsi_free_q_vectors() function by itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") the driver has zeroed out num_q_vectors, and only restored it in ice_vsi_cfg_def(). This further causes the ice_rebuild() function to allocate a zero length buffer, after which num_q_vectors is updated, and then the new value of num_q_vectors is used to index into the zero length buffer, which corrupts memory. The fix entails making sure all the code referencing num_q_vectors only does so after it has been reset via ice_vsi_cfg_def(). I didn't perform a full bisect, but I was able to test against 6.1.77 kernel and that ice driver works fine for suspend/resume with no panic, so sometime since then, this problem was introduced. Also clean up an un-needed init of a local variable in the function being modified. PANIC from 6.8.0-rc1: [1026674.915596] PM: suspend exit [1026675.664697] ice 0000:17:00.1: PTP reset successful [1026675.664707] ice 0000:17:00.1: 2755 msecs passed between update to cached PHC time [1026675.667660] ice 0000:b1:00.0: PTP reset successful [1026675.675944] ice 0000:b1:00.0: 2832 msecs passed between update to cached PHC time [1026677.137733] ixgbe 0000:31:00.0 ens787: NIC Link is Up 1 Gbps, Flow Control: None [1026677.190201] BUG: kernel NULL pointer dereference, address: 0000000000000010 [1026677.192753] ice 0000:17:00.0: PTP reset successful [1026677.192764] ice 0000:17:00.0: 4548 msecs passed between update to cached PHC time [1026677.197928] #PF: supervisor read access in kernel mode [1026677.197933] #PF: error_code(0x0000) - not-present page [1026677.197937] PGD 1557a7067 P4D 0 [1026677.212133] ice 0000:b1:00.1: PTP reset successful [1026677.212143] ice 0000:b1:00.1: 4344 msecs passed between update to cached PHC time [1026677.212575] [1026677.243142] Oops: 0000 [#1] PREEMPT SMP NOPTI [1026677.247918] CPU: 23 PID: 42790 Comm: kworker/23:0 Kdump: loaded Tainted: G W 6.8.0-rc1+ #1 [1026677.257989] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [1026677.269367] Workqueue: ice ice_service_task [ice] [1026677.274592] RIP: 0010:ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.281421] Code: 0f 84 3a ff ff ff 41 0f b7 74 ec 02 66 89 b0 22 02 00 00 81 e6 ff 1f 00 00 e8 ec fd ff ff e9 35 ff ff ff 48 8b 43 30 49 63 ed <41> 0f b7 34 24 41 83 c5 01 48 8b 3c e8 66 89 b7 aa 02 00 00 81 e6 [1026677.300877] RSP: 0018:ff3be62a6399bcc0 EFLAGS: 00010202 [1026677.306556] RAX: ff28691e28980828 RBX: ff28691e41099828 RCX: 0000000000188000 [1026677.314148] RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff28691e41099828 [1026677.321730] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [1026677.329311] R10: 0000000000000007 R11: ffffffffffffffc0 R12: 0000000000000010 [1026677.336896] R13: 0000000000000000 R14: 0000000000000000 R15: ff28691e0eaa81a0 [1026677.344472] FS: 0000000000000000(0000) GS:ff28693cbffc0000(0000) knlGS:0000000000000000 [1026677.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1026677.359195] CR2: 0000000000000010 CR3: 0000000128df4001 CR4: 0000000000771ef0 [1026677.366779] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1026677.374369] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1026677.381952] PKRU: 55555554 [1026677.385116] Call Trace: [1026677.388023] <TASK> [1026677.390589] ? __die+0x20/0x70 [1026677.394105] ? page_fault_oops+0x82/0x160 [1026677.398576] ? do_user_addr_fault+0x65/0x6a0 [1026677.403307] ? exc_page_fault+0x6a/0x150 [1026677.407694] ? asm_exc_page_fault+0x22/0x30 [1026677.412349] ? ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.4186 ---truncated--- |
| CVE-2024-35910 | In the Linux kernel, the following vulnerability has been resolved: tcp: properly terminate timers for kernel sockets We had various syzbot reports about tcp timers firing after the corresponding netns has been dismantled. Fortunately Josef Bacik could trigger the issue more often, and could test a patch I wrote two years ago. When TCP sockets are closed, we call inet_csk_clear_xmit_timers() to 'stop' the timers. inet_csk_clear_xmit_timers() can be called from any context, including when socket lock is held. This is the reason it uses sk_stop_timer(), aka del_timer(). This means that ongoing timers might finish much later. For user sockets, this is fine because each running timer holds a reference on the socket, and the user socket holds a reference on the netns. For kernel sockets, we risk that the netns is freed before timer can complete, because kernel sockets do not hold reference on the netns. This patch adds inet_csk_clear_xmit_timers_sync() function that using sk_stop_timer_sync() to make sure all timers are terminated before the kernel socket is released. Modules using kernel sockets close them in their netns exit() handler. Also add sock_not_owned_by_me() helper to get LOCKDEP support : inet_csk_clear_xmit_timers_sync() must not be called while socket lock is held. It is very possible we can revert in the future commit 3a58f13a881e ("net: rds: acquire refcount on TCP sockets") which attempted to solve the issue in rds only. (net/smc/af_smc.c and net/mptcp/subflow.c have similar code) We probably can remove the check_net() tests from tcp_out_of_resources() and __tcp_close() in the future. |
| CVE-2024-35909 | In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: Split 64bit accesses to fix alignment issues Some of the registers are aligned on a 32bit boundary, causing alignment faults on 64bit platforms. Unable to handle kernel paging request at virtual address ffffffc084a1d004 Mem abort info: ESR = 0x0000000096000061 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000061, ISS2 = 0x00000000 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000046ad6000 [ffffffc084a1d004] pgd=100000013ffff003, p4d=100000013ffff003, pud=100000013ffff003, pmd=0068000020a00711 Internal error: Oops: 0000000096000061 [#1] SMP Modules linked in: mtk_t7xx(+) qcserial pppoe ppp_async option nft_fib_inet nf_flow_table_inet mt7921u(O) mt7921s(O) mt7921e(O) mt7921_common(O) iwlmvm(O) iwldvm(O) usb_wwan rndis_host qmi_wwan pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mt7996e(O) mt792x_usb(O) mt792x_lib(O) mt7915e(O) mt76_usb(O) mt76_sdio(O) mt76_connac_lib(O) mt76(O) mac80211(O) iwlwifi(O) huawei_cdc_ncm cfg80211(O) cdc_ncm cdc_ether wwan usbserial usbnet slhc sfp rtc_pcf8563 nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 mt6577_auxadc mdio_i2c libcrc32c compat(O) cdc_wdm cdc_acm at24 crypto_safexcel pwm_fan i2c_gpio i2c_smbus industrialio i2c_algo_bit i2c_mux_reg i2c_mux_pca954x i2c_mux_pca9541 i2c_mux_gpio i2c_mux dummy oid_registry tun sha512_arm64 sha1_ce sha1_generic seqiv md5 geniv des_generic libdes cbc authencesn authenc leds_gpio xhci_plat_hcd xhci_pci xhci_mtk_hcd xhci_hcd nvme nvme_core gpio_button_hotplug(O) dm_mirror dm_region_hash dm_log dm_crypt dm_mod dax usbcore usb_common ptp aquantia pps_core mii tpm encrypted_keys trusted CPU: 3 PID: 5266 Comm: kworker/u9:1 Tainted: G O 6.6.22 #0 Hardware name: Bananapi BPI-R4 (DT) Workqueue: md_hk_wq t7xx_fsm_uninit [mtk_t7xx] pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : t7xx_cldma_hw_set_start_addr+0x1c/0x3c [mtk_t7xx] lr : t7xx_cldma_start+0xac/0x13c [mtk_t7xx] sp : ffffffc085d63d30 x29: ffffffc085d63d30 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: ffffff80c804f2c0 x24: ffffff80ca196c05 x23: 0000000000000000 x22: ffffff80c814b9b8 x21: ffffff80c814b128 x20: 0000000000000001 x19: ffffff80c814b080 x18: 0000000000000014 x17: 0000000055c9806b x16: 000000007c5296d0 x15: 000000000f6bca68 x14: 00000000dbdbdce4 x13: 000000001aeaf72a x12: 0000000000000001 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffffff80ca1ef6b4 x7 : ffffff80c814b818 x6 : 0000000000000018 x5 : 0000000000000870 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 000000010a947000 x1 : ffffffc084a1d004 x0 : ffffffc084a1d004 Call trace: t7xx_cldma_hw_set_start_addr+0x1c/0x3c [mtk_t7xx] t7xx_fsm_uninit+0x578/0x5ec [mtk_t7xx] process_one_work+0x154/0x2a0 worker_thread+0x2ac/0x488 kthread+0xe0/0xec ret_from_fork+0x10/0x20 Code: f9400800 91001000 8b214001 d50332bf (f9000022) ---[ end trace 0000000000000000 ]--- The inclusion of io-64-nonatomic-lo-hi.h indicates that all 64bit accesses can be replaced by pairs of nonatomic 32bit access. Fix alignment by forcing all accesses to be 32bit on 64bit platforms. |
| CVE-2024-35908 | In the Linux kernel, the following vulnerability has been resolved: tls: get psock ref after taking rxlock to avoid leak At the start of tls_sw_recvmsg, we take a reference on the psock, and then call tls_rx_reader_lock. If that fails, we return directly without releasing the reference. Instead of adding a new label, just take the reference after locking has succeeded, since we don't need it before. |
| CVE-2024-35907 | In the Linux kernel, the following vulnerability has been resolved: mlxbf_gige: call request_irq() after NAPI initialized The mlxbf_gige driver encounters a NULL pointer exception in mlxbf_gige_open() when kdump is enabled. The sequence to reproduce the exception is as follows: a) enable kdump b) trigger kdump via "echo c > /proc/sysrq-trigger" c) kdump kernel executes d) kdump kernel loads mlxbf_gige module e) the mlxbf_gige module runs its open() as the the "oob_net0" interface is brought up f) mlxbf_gige module will experience an exception during its open(), something like: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000004 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e29a4000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000086000004 [#1] SMP CPU: 0 PID: 812 Comm: NetworkManager Tainted: G OE 5.15.0-1035-bluefield #37-Ubuntu Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.6.0.13024 Jan 19 2024 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : __napi_poll+0x40/0x230 sp : ffff800008003e00 x29: ffff800008003e00 x28: 0000000000000000 x27: 00000000ffffffff x26: ffff000066027238 x25: ffff00007cedec00 x24: ffff800008003ec8 x23: 000000000000012c x22: ffff800008003eb7 x21: 0000000000000000 x20: 0000000000000001 x19: ffff000066027238 x18: 0000000000000000 x17: ffff578fcb450000 x16: ffffa870b083c7c0 x15: 0000aaab010441d0 x14: 0000000000000001 x13: 00726f7272655f65 x12: 6769675f6662786c x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa870b0842398 x8 : 0000000000000004 x7 : fe5a48b9069706ea x6 : 17fdb11fc84ae0d2 x5 : d94a82549d594f35 x4 : 0000000000000000 x3 : 0000000000400100 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000066027238 Call trace: 0x0 net_rx_action+0x178/0x360 __do_softirq+0x15c/0x428 __irq_exit_rcu+0xac/0xec irq_exit+0x18/0x2c handle_domain_irq+0x6c/0xa0 gic_handle_irq+0xec/0x1b0 call_on_irq_stack+0x20/0x2c do_interrupt_handler+0x5c/0x70 el1_interrupt+0x30/0x50 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x7c/0x80 __setup_irq+0x4c0/0x950 request_threaded_irq+0xf4/0x1bc mlxbf_gige_request_irqs+0x68/0x110 [mlxbf_gige] mlxbf_gige_open+0x5c/0x170 [mlxbf_gige] __dev_open+0x100/0x220 __dev_change_flags+0x16c/0x1f0 dev_change_flags+0x2c/0x70 do_setlink+0x220/0xa40 __rtnl_newlink+0x56c/0x8a0 rtnl_newlink+0x58/0x84 rtnetlink_rcv_msg+0x138/0x3c4 netlink_rcv_skb+0x64/0x130 rtnetlink_rcv+0x20/0x30 netlink_unicast+0x2ec/0x360 netlink_sendmsg+0x278/0x490 __sock_sendmsg+0x5c/0x6c ____sys_sendmsg+0x290/0x2d4 ___sys_sendmsg+0x84/0xd0 __sys_sendmsg+0x70/0xd0 __arm64_sys_sendmsg+0x2c/0x40 invoke_syscall+0x78/0x100 el0_svc_common.constprop.0+0x54/0x184 do_el0_svc+0x30/0xac el0_svc+0x48/0x160 el0t_64_sync_handler+0xa4/0x12c el0t_64_sync+0x1a4/0x1a8 Code: bad PC value ---[ end trace 7d1c3f3bf9d81885 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt Kernel Offset: 0x2870a7a00000 from 0xffff800008000000 PHYS_OFFSET: 0x80000000 CPU features: 0x0,000005c1,a3332a5a Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- The exception happens because there is a pending RX interrupt before the call to request_irq(RX IRQ) executes. Then, the RX IRQ handler fires immediately after this request_irq() completes. The ---truncated--- |
| CVE-2024-35905 | In the Linux kernel, the following vulnerability has been resolved: bpf: Protect against int overflow for stack access size This patch re-introduces protection against the size of access to stack memory being negative; the access size can appear negative as a result of overflowing its signed int representation. This should not actually happen, as there are other protections along the way, but we should protect against it anyway. One code path was missing such protections (fixed in the previous patch in the series), causing out-of-bounds array accesses in check_stack_range_initialized(). This patch causes the verification of a program with such a non-sensical access size to fail. This check used to exist in a more indirect way, but was inadvertendly removed in a833a17aeac7. |
| CVE-2024-35904 | In the Linux kernel, the following vulnerability has been resolved: selinux: avoid dereference of garbage after mount failure In case kern_mount() fails and returns an error pointer return in the error branch instead of continuing and dereferencing the error pointer. While on it drop the never read static variable selinuxfs_mount. |
| CVE-2024-35903 | In the Linux kernel, the following vulnerability has been resolved: x86/bpf: Fix IP after emitting call depth accounting Adjust the IP passed to `emit_patch` so it calculates the correct offset for the CALL instruction if `x86_call_depth_emit_accounting` emits code. Otherwise we will skip some instructions and most likely crash. |
| CVE-2024-35902 | In the Linux kernel, the following vulnerability has been resolved: net/rds: fix possible cp null dereference cp might be null, calling cp->cp_conn would produce null dereference [Simon Horman adds:] Analysis: * cp is a parameter of __rds_rdma_map and is not reassigned. * The following call-sites pass a NULL cp argument to __rds_rdma_map() - rds_get_mr() - rds_get_mr_for_dest * Prior to the code above, the following assumes that cp may be NULL (which is indicative, but could itself be unnecessary) trans_private = rs->rs_transport->get_mr( sg, nents, rs, &mr->r_key, cp ? cp->cp_conn : NULL, args->vec.addr, args->vec.bytes, need_odp ? ODP_ZEROBASED : ODP_NOT_NEEDED); * The code modified by this patch is guarded by IS_ERR(trans_private), where trans_private is assigned as per the previous point in this analysis. The only implementation of get_mr that I could locate is rds_ib_get_mr() which can return an ERR_PTR if the conn (4th) argument is NULL. * ret is set to PTR_ERR(trans_private). rds_ib_get_mr can return ERR_PTR(-ENODEV) if the conn (4th) argument is NULL. Thus ret may be -ENODEV in which case the code in question will execute. Conclusion: * cp may be NULL at the point where this patch adds a check; this patch does seem to address a possible bug |
| CVE-2024-35901 | In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix Rx DMA datasize and skb_over_panic mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be multiple of 64. So a packet slightly bigger than mtu+14, say 1536, can be received and cause skb_over_panic. Sample dmesg: [ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:<NULL> [ 5325.243689] ------------[ cut here ]------------ [ 5325.245748] kernel BUG at net/core/skbuff.c:192! [ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60 [ 5325.302941] Call Trace: [ 5325.304389] <IRQ> [ 5325.315794] ? skb_panic+0x4f/0x60 [ 5325.317457] ? asm_exc_invalid_op+0x1f/0x30 [ 5325.319490] ? skb_panic+0x4f/0x60 [ 5325.321161] skb_put+0x4e/0x50 [ 5325.322670] mana_poll+0x6fa/0xb50 [mana] [ 5325.324578] __napi_poll+0x33/0x1e0 [ 5325.326328] net_rx_action+0x12e/0x280 As discussed internally, this alignment is not necessary. To fix this bug, remove it from the code. So oversized packets will be marked as CQE_RX_TRUNCATED by NIC, and dropped. |
| CVE-2024-35900 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject new basechain after table flag update When dormant flag is toggled, hooks are disabled in the commit phase by iterating over current chains in table (existing and new). The following configuration allows for an inconsistent state: add table x add chain x y { type filter hook input priority 0; } add table x { flags dormant; } add chain x w { type filter hook input priority 1; } which triggers the following warning when trying to unregister chain w which is already unregistered. [ 127.322252] WARNING: CPU: 7 PID: 1211 at net/netfilter/core.c:50 1 __nf_unregister_net_hook+0x21a/0x260 [...] [ 127.322519] Call Trace: [ 127.322521] <TASK> [ 127.322524] ? __warn+0x9f/0x1a0 [ 127.322531] ? __nf_unregister_net_hook+0x21a/0x260 [ 127.322537] ? report_bug+0x1b1/0x1e0 [ 127.322545] ? handle_bug+0x3c/0x70 [ 127.322552] ? exc_invalid_op+0x17/0x40 [ 127.322556] ? asm_exc_invalid_op+0x1a/0x20 [ 127.322563] ? kasan_save_free_info+0x3b/0x60 [ 127.322570] ? __nf_unregister_net_hook+0x6a/0x260 [ 127.322577] ? __nf_unregister_net_hook+0x21a/0x260 [ 127.322583] ? __nf_unregister_net_hook+0x6a/0x260 [ 127.322590] ? __nf_tables_unregister_hook+0x8a/0xe0 [nf_tables] [ 127.322655] nft_table_disable+0x75/0xf0 [nf_tables] [ 127.322717] nf_tables_commit+0x2571/0x2620 [nf_tables] |
| CVE-2024-35899 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: flush pending destroy work before exit_net release Similar to 2c9f0293280e ("netfilter: nf_tables: flush pending destroy work before netlink notifier") to address a race between exit_net and the destroy workqueue. The trace below shows an element to be released via destroy workqueue while exit_net path (triggered via module removal) has already released the set that is used in such transaction. [ 1360.547789] BUG: KASAN: slab-use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.547861] Read of size 8 at addr ffff888140500cc0 by task kworker/4:1/152465 [ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not tainted 6.8.0+ #359 [ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 1360.547984] Call Trace: [ 1360.547991] <TASK> [ 1360.547998] dump_stack_lvl+0x53/0x70 [ 1360.548014] print_report+0xc4/0x610 [ 1360.548026] ? __virt_addr_valid+0xba/0x160 [ 1360.548040] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 1360.548054] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548176] kasan_report+0xae/0xe0 [ 1360.548189] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548312] nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548447] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables] [ 1360.548577] ? _raw_spin_unlock_irq+0x18/0x30 [ 1360.548591] process_one_work+0x2f1/0x670 [ 1360.548610] worker_thread+0x4d3/0x760 [ 1360.548627] ? __pfx_worker_thread+0x10/0x10 [ 1360.548640] kthread+0x16b/0x1b0 [ 1360.548653] ? __pfx_kthread+0x10/0x10 [ 1360.548665] ret_from_fork+0x2f/0x50 [ 1360.548679] ? __pfx_kthread+0x10/0x10 [ 1360.548690] ret_from_fork_asm+0x1a/0x30 [ 1360.548707] </TASK> [ 1360.548719] Allocated by task 192061: [ 1360.548726] kasan_save_stack+0x20/0x40 [ 1360.548739] kasan_save_track+0x14/0x30 [ 1360.548750] __kasan_kmalloc+0x8f/0xa0 [ 1360.548760] __kmalloc_node+0x1f1/0x450 [ 1360.548771] nf_tables_newset+0x10c7/0x1b50 [nf_tables] [ 1360.548883] nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink] [ 1360.548909] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink] [ 1360.548927] netlink_unicast+0x367/0x4f0 [ 1360.548935] netlink_sendmsg+0x34b/0x610 [ 1360.548944] ____sys_sendmsg+0x4d4/0x510 [ 1360.548953] ___sys_sendmsg+0xc9/0x120 [ 1360.548961] __sys_sendmsg+0xbe/0x140 [ 1360.548971] do_syscall_64+0x55/0x120 [ 1360.548982] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 1360.548994] Freed by task 192222: [ 1360.548999] kasan_save_stack+0x20/0x40 [ 1360.549009] kasan_save_track+0x14/0x30 [ 1360.549019] kasan_save_free_info+0x3b/0x60 [ 1360.549028] poison_slab_object+0x100/0x180 [ 1360.549036] __kasan_slab_free+0x14/0x30 [ 1360.549042] kfree+0xb6/0x260 [ 1360.549049] __nft_release_table+0x473/0x6a0 [nf_tables] [ 1360.549131] nf_tables_exit_net+0x170/0x240 [nf_tables] [ 1360.549221] ops_exit_list+0x50/0xa0 [ 1360.549229] free_exit_list+0x101/0x140 [ 1360.549236] unregister_pernet_operations+0x107/0x160 [ 1360.549245] unregister_pernet_subsys+0x1c/0x30 [ 1360.549254] nf_tables_module_exit+0x43/0x80 [nf_tables] [ 1360.549345] __do_sys_delete_module+0x253/0x370 [ 1360.549352] do_syscall_64+0x55/0x120 [ 1360.549360] entry_SYSCALL_64_after_hwframe+0x55/0x5d (gdb) list *__nft_release_table+0x473 0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354). 11349 list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) { 11350 list_del(&flowtable->list); 11351 nft_use_dec(&table->use); 11352 nf_tables_flowtable_destroy(flowtable); 11353 } 11354 list_for_each_entry_safe(set, ns, &table->sets, list) { 11355 list_del(&set->list); 11356 nft_use_dec(&table->use); 11357 if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT)) 11358 nft_map_deactivat ---truncated--- |
| CVE-2024-35898 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get() nft_unregister_flowtable_type() within nf_flow_inet_module_exit() can concurrent with __nft_flowtable_type_get() within nf_tables_newflowtable(). And thhere is not any protection when iterate over nf_tables_flowtables list in __nft_flowtable_type_get(). Therefore, there is pertential data-race of nf_tables_flowtables list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_flowtables list in __nft_flowtable_type_get(), and use rcu_read_lock() in the caller nft_flowtable_type_get() to protect the entire type query process. |
| CVE-2024-35897 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: discard table flag update with pending basechain deletion Hook unregistration is deferred to the commit phase, same occurs with hook updates triggered by the table dormant flag. When both commands are combined, this results in deleting a basechain while leaving its hook still registered in the core. |
| CVE-2024-35896 | In the Linux kernel, the following vulnerability has been resolved: netfilter: validate user input for expected length I got multiple syzbot reports showing old bugs exposed by BPF after commit 20f2505fb436 ("bpf: Try to avoid kzalloc in cgroup/{s,g}etsockopt") setsockopt() @optlen argument should be taken into account before copying data. BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline] BUG: KASAN: slab-out-of-bounds in do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627 Read of size 96 at addr ffff88802cd73da0 by task syz-executor.4/7238 CPU: 1 PID: 7238 Comm: syz-executor.4 Not tainted 6.9.0-rc2-next-20240403-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline] do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627 nf_setsockopt+0x295/0x2c0 net/netfilter/nf_sockopt.c:101 do_sock_setsockopt+0x3af/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x72/0x7a RIP: 0033:0x7fd22067dde9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd21f9ff0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007fd2207abf80 RCX: 00007fd22067dde9 RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007fd2206ca47a R08: 0000000000000001 R09: 0000000000000000 R10: 0000000020000880 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fd2207abf80 R15: 00007ffd2d0170d8 </TASK> Allocated by task 7238: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:370 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:4069 [inline] __kmalloc_noprof+0x200/0x410 mm/slub.c:4082 kmalloc_noprof include/linux/slab.h:664 [inline] __cgroup_bpf_run_filter_setsockopt+0xd47/0x1050 kernel/bpf/cgroup.c:1869 do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x72/0x7a The buggy address belongs to the object at ffff88802cd73da0 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of allocated 1-byte region [ffff88802cd73da0, ffff88802cd73da1) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802cd73020 pfn:0x2cd73 flags: 0xfff80000000000(node=0|zone=1|lastcpupid=0xfff) page_type: 0xffffefff(slab) raw: 00fff80000000000 ffff888015041280 dead000000000100 dead000000000122 raw: ffff88802cd73020 000000008080007f 00000001ffffefff 00 ---truncated--- |
| CVE-2024-35895 | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Prevent lock inversion deadlock in map delete elem syzkaller started using corpuses where a BPF tracing program deletes elements from a sockmap/sockhash map. Because BPF tracing programs can be invoked from any interrupt context, locks taken during a map_delete_elem operation must be hardirq-safe. Otherwise a deadlock due to lock inversion is possible, as reported by lockdep: CPU0 CPU1 ---- ---- lock(&htab->buckets[i].lock); local_irq_disable(); lock(&host->lock); lock(&htab->buckets[i].lock); <Interrupt> lock(&host->lock); Locks in sockmap are hardirq-unsafe by design. We expects elements to be deleted from sockmap/sockhash only in task (normal) context with interrupts enabled, or in softirq context. Detect when map_delete_elem operation is invoked from a context which is _not_ hardirq-unsafe, that is interrupts are disabled, and bail out with an error. Note that map updates are not affected by this issue. BPF verifier does not allow updating sockmap/sockhash from a BPF tracing program today. |
| CVE-2024-35894 | In the Linux kernel, the following vulnerability has been resolved: mptcp: prevent BPF accessing lowat from a subflow socket. Alexei reported the following splat: WARNING: CPU: 32 PID: 3276 at net/mptcp/subflow.c:1430 subflow_data_ready+0x147/0x1c0 Modules linked in: dummy bpf_testmod(O) [last unloaded: bpf_test_no_cfi(O)] CPU: 32 PID: 3276 Comm: test_progs Tainted: GO 6.8.0-12873-g2c43c33bfd23 Call Trace: <TASK> mptcp_set_rcvlowat+0x79/0x1d0 sk_setsockopt+0x6c0/0x1540 __bpf_setsockopt+0x6f/0x90 bpf_sock_ops_setsockopt+0x3c/0x90 bpf_prog_509ce5db2c7f9981_bpf_test_sockopt_int+0xb4/0x11b bpf_prog_dce07e362d941d2b_bpf_test_socket_sockopt+0x12b/0x132 bpf_prog_348c9b5faaf10092_skops_sockopt+0x954/0xe86 __cgroup_bpf_run_filter_sock_ops+0xbc/0x250 tcp_connect+0x879/0x1160 tcp_v6_connect+0x50c/0x870 mptcp_connect+0x129/0x280 __inet_stream_connect+0xce/0x370 inet_stream_connect+0x36/0x50 bpf_trampoline_6442491565+0x49/0xef inet_stream_connect+0x5/0x50 __sys_connect+0x63/0x90 __x64_sys_connect+0x14/0x20 The root cause of the issue is that bpf allows accessing mptcp-level proto_ops from a tcp subflow scope. Fix the issue detecting the problematic call and preventing any action. |
| CVE-2024-35893 | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: prevent kernel-infoleak syzbot found that tcf_skbmod_dump() was copying four bytes from kernel stack to user space [1]. The issue here is that 'struct tc_skbmod' has a four bytes hole. We need to clear the structure before filling fields. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 copy_to_iter include/linux/uio.h:196 [inline] simple_copy_to_iter net/core/datagram.c:532 [inline] __skb_datagram_iter+0x185/0x1000 net/core/datagram.c:420 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:4050 [inline] netlink_recvmsg+0x432/0x1610 net/netlink/af_netlink.c:1962 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x2c4/0x340 net/socket.c:1068 __sys_recvfrom+0x35a/0x5f0 net/socket.c:2242 __do_sys_recvfrom net/socket.c:2260 [inline] __se_sys_recvfrom net/socket.c:2256 [inline] __x64_sys_recvfrom+0x126/0x1d0 net/socket.c:2256 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: pskb_expand_head+0x30f/0x19d0 net/core/skbuff.c:2253 netlink_trim+0x2c2/0x330 net/netlink/af_netlink.c:1317 netlink_unicast+0x9f/0x1260 net/netlink/af_netlink.c:1351 nlmsg_unicast include/net/netlink.h:1144 [inline] nlmsg_notify+0x21d/0x2f0 net/netlink/af_netlink.c:2610 rtnetlink_send+0x73/0x90 net/core/rtnetlink.c:741 rtnetlink_maybe_send include/linux/rtnetlink.h:17 [inline] tcf_add_notify net/sched/act_api.c:2048 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x146e/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: __nla_put lib/nlattr.c:1041 [inline] nla_put+0x1c6/0x230 lib/nlattr.c:1099 tcf_skbmod_dump+0x23f/0xc20 net/sched/act_skbmod.c:256 tcf_action_dump_old net/sched/act_api.c:1191 [inline] tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227 tcf_action_dump+0x1fd/0x460 net/sched/act_api.c:1251 tca_get_fill+0x519/0x7a0 net/sched/act_api.c:1628 tcf_add_notify_msg net/sched/act_api.c:2023 [inline] tcf_add_notify net/sched/act_api.c:2042 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x1365/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netli ---truncated--- |
| CVE-2024-35892 | In the Linux kernel, the following vulnerability has been resolved: net/sched: fix lockdep splat in qdisc_tree_reduce_backlog() qdisc_tree_reduce_backlog() is called with the qdisc lock held, not RTNL. We must use qdisc_lookup_rcu() instead of qdisc_lookup() syzbot reported: WARNING: suspicious RCU usage 6.1.74-syzkaller #0 Not tainted ----------------------------- net/sched/sch_api.c:305 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by udevd/1142: #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline] #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline] #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: net_tx_action+0x64a/0x970 net/core/dev.c:5282 #1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:350 [inline] #1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: net_tx_action+0x754/0x970 net/core/dev.c:5297 #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline] #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline] #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: qdisc_tree_reduce_backlog+0x84/0x580 net/sched/sch_api.c:792 stack backtrace: CPU: 1 PID: 1142 Comm: udevd Not tainted 6.1.74-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <TASK> [<ffffffff85b85f14>] __dump_stack lib/dump_stack.c:88 [inline] [<ffffffff85b85f14>] dump_stack_lvl+0x1b1/0x28f lib/dump_stack.c:106 [<ffffffff85b86007>] dump_stack+0x15/0x1e lib/dump_stack.c:113 [<ffffffff81802299>] lockdep_rcu_suspicious+0x1b9/0x260 kernel/locking/lockdep.c:6592 [<ffffffff84f0054c>] qdisc_lookup+0xac/0x6f0 net/sched/sch_api.c:305 [<ffffffff84f037c3>] qdisc_tree_reduce_backlog+0x243/0x580 net/sched/sch_api.c:811 [<ffffffff84f5b78c>] pfifo_tail_enqueue+0x32c/0x4b0 net/sched/sch_fifo.c:51 [<ffffffff84fbcf63>] qdisc_enqueue include/net/sch_generic.h:833 [inline] [<ffffffff84fbcf63>] netem_dequeue+0xeb3/0x15d0 net/sched/sch_netem.c:723 [<ffffffff84eecab9>] dequeue_skb net/sched/sch_generic.c:292 [inline] [<ffffffff84eecab9>] qdisc_restart net/sched/sch_generic.c:397 [inline] [<ffffffff84eecab9>] __qdisc_run+0x249/0x1e60 net/sched/sch_generic.c:415 [<ffffffff84d7aa96>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125 [<ffffffff84d85d29>] net_tx_action+0x7c9/0x970 net/core/dev.c:5313 [<ffffffff85e002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:616 [<ffffffff81568bca>] invoke_softirq kernel/softirq.c:447 [inline] [<ffffffff81568bca>] __irq_exit_rcu+0xca/0x230 kernel/softirq.c:700 [<ffffffff81568ae9>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:712 [<ffffffff85b89f52>] sysvec_apic_timer_interrupt+0x42/0x90 arch/x86/kernel/apic/apic.c:1107 [<ffffffff85c00ccb>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 arch/x86/include/asm/idtentry.h:656 |
| CVE-2024-35891 | In the Linux kernel, the following vulnerability has been resolved: net: phy: micrel: Fix potential null pointer dereference In lan8814_get_sig_rx() and lan8814_get_sig_tx() ptp_parse_header() may return NULL as ptp_header due to abnormal packet type or corrupted packet. Fix this bug by adding ptp_header check. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-35890 | In the Linux kernel, the following vulnerability has been resolved: gro: fix ownership transfer If packets are GROed with fraglist they might be segmented later on and continue their journey in the stack. In skb_segment_list those skbs can be reused as-is. This is an issue as their destructor was removed in skb_gro_receive_list but not the reference to their socket, and then they can't be orphaned. Fix this by also removing the reference to the socket. For example this could be observed, kernel BUG at include/linux/skbuff.h:3131! (skb_orphan) RIP: 0010:ip6_rcv_core+0x11bc/0x19a0 Call Trace: ipv6_list_rcv+0x250/0x3f0 __netif_receive_skb_list_core+0x49d/0x8f0 netif_receive_skb_list_internal+0x634/0xd40 napi_complete_done+0x1d2/0x7d0 gro_cell_poll+0x118/0x1f0 A similar construction is found in skb_gro_receive, apply the same change there. |
| CVE-2024-35889 | In the Linux kernel, the following vulnerability has been resolved: idpf: fix kernel panic on unknown packet types In the very rare case where a packet type is unknown to the driver, idpf_rx_process_skb_fields would return early without calling eth_type_trans to set the skb protocol / the network layer handler. This is especially problematic if tcpdump is running when such a packet is received, i.e. it would cause a kernel panic. Instead, call eth_type_trans for every single packet, even when the packet type is unknown. |
| CVE-2024-35888 | In the Linux kernel, the following vulnerability has been resolved: erspan: make sure erspan_base_hdr is present in skb->head syzbot reported a problem in ip6erspan_rcv() [1] Issue is that ip6erspan_rcv() (and erspan_rcv()) no longer make sure erspan_base_hdr is present in skb linear part (skb->head) before getting @ver field from it. Add the missing pskb_may_pull() calls. v2: Reload iph pointer in erspan_rcv() after pskb_may_pull() because skb->head might have changed. [1] BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2756 [inline] BUG: KMSAN: uninit-value in ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] BUG: KMSAN: uninit-value in gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] pskb_may_pull include/linux/skbuff.h:2756 [inline] ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 ip6_protocol_deliver_rcu+0x1d4c/0x2ca0 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish+0x955/0x970 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xde/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5538 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5652 netif_receive_skb_internal net/core/dev.c:5738 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5798 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1549 tun_get_user+0x5566/0x69e0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 tun_alloc_skb drivers/net/tun.c:1525 [inline] tun_get_user+0x209a/0x69e0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 5045 Comm: syz-executor114 Not tainted 6.9.0-rc1-syzkaller-00021-g962490525cff #0 |
| CVE-2024-35887 | In the Linux kernel, the following vulnerability has been resolved: ax25: fix use-after-free bugs caused by ax25_ds_del_timer When the ax25 device is detaching, the ax25_dev_device_down() calls ax25_ds_del_timer() to cleanup the slave_timer. When the timer handler is running, the ax25_ds_del_timer() that calls del_timer() in it will return directly. As a result, the use-after-free bugs could happen, one of the scenarios is shown below: (Thread 1) | (Thread 2) | ax25_ds_timeout() ax25_dev_device_down() | ax25_ds_del_timer() | del_timer() | ax25_dev_put() //FREE | | ax25_dev-> //USE In order to mitigate bugs, when the device is detaching, use timer_shutdown_sync() to stop the timer. |
| CVE-2024-35886 | In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix infinite recursion in fib6_dump_done(). syzkaller reported infinite recursive calls of fib6_dump_done() during netlink socket destruction. [1] From the log, syzkaller sent an AF_UNSPEC RTM_GETROUTE message, and then the response was generated. The following recvmmsg() resumed the dump for IPv6, but the first call of inet6_dump_fib() failed at kzalloc() due to the fault injection. [0] 12:01:34 executing program 3: r0 = socket$nl_route(0x10, 0x3, 0x0) sendmsg$nl_route(r0, ... snip ...) recvmmsg(r0, ... snip ...) (fail_nth: 8) Here, fib6_dump_done() was set to nlk_sk(sk)->cb.done, and the next call of inet6_dump_fib() set it to nlk_sk(sk)->cb.args[3]. syzkaller stopped receiving the response halfway through, and finally netlink_sock_destruct() called nlk_sk(sk)->cb.done(). fib6_dump_done() calls fib6_dump_end() and nlk_sk(sk)->cb.done() if it is still not NULL. fib6_dump_end() rewrites nlk_sk(sk)->cb.done() by nlk_sk(sk)->cb.args[3], but it has the same function, not NULL, calling itself recursively and hitting the stack guard page. To avoid the issue, let's set the destructor after kzalloc(). [0]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 1 PID: 432110 Comm: syz-executor.3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3733) kmalloc_trace (mm/slub.c:3748 mm/slub.c:3827 mm/slub.c:3992) inet6_dump_fib (./include/linux/slab.h:628 ./include/linux/slab.h:749 net/ipv6/ip6_fib.c:662) rtnl_dump_all (net/core/rtnetlink.c:4029) netlink_dump (net/netlink/af_netlink.c:2269) netlink_recvmsg (net/netlink/af_netlink.c:1988) ____sys_recvmsg (net/socket.c:1046 net/socket.c:2801) ___sys_recvmsg (net/socket.c:2846) do_recvmmsg (net/socket.c:2943) __x64_sys_recvmmsg (net/socket.c:3041 net/socket.c:3034 net/socket.c:3034) [1]: BUG: TASK stack guard page was hit at 00000000f2fa9af1 (stack is 00000000b7912430..000000009a436beb) stack guard page: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 223719 Comm: kworker/1:3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events netlink_sock_destruct_work RIP: 0010:fib6_dump_done (net/ipv6/ip6_fib.c:570) Code: 3c 24 e8 f3 e9 51 fd e9 28 fd ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 41 57 41 56 41 55 41 54 55 48 89 fd <53> 48 8d 5d 60 e8 b6 4d 07 fd 48 89 da 48 b8 00 00 00 00 00 fc ff RSP: 0018:ffffc9000d980000 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffffff84405990 RCX: ffffffff844059d3 RDX: ffff8881028e0000 RSI: ffffffff84405ac2 RDI: ffff88810c02f358 RBP: ffff88810c02f358 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000224 R12: 0000000000000000 R13: ffff888007c82c78 R14: ffff888007c82c68 R15: ffff888007c82c68 FS: 0000000000000000(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d97fff8 CR3: 0000000102309002 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <#DF> </#DF> <TASK> fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) ... fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) netlink_sock_destruct (net/netlink/af_netlink.c:401) __sk_destruct (net/core/sock.c:2177 (discriminator 2)) sk_destruct (net/core/sock.c:2224) __sk_free (net/core/sock.c:2235) sk_free (net/core/sock.c:2246) process_one_work (kernel/workqueue.c:3259) worker_thread (kernel/workqueue.c:3329 kernel/workqueue. ---truncated--- |
| CVE-2024-35885 | In the Linux kernel, the following vulnerability has been resolved: mlxbf_gige: stop interface during shutdown The mlxbf_gige driver intermittantly encounters a NULL pointer exception while the system is shutting down via "reboot" command. The mlxbf_driver will experience an exception right after executing its shutdown() method. One example of this exception is: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000011d373000 [0000000000000070] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] SMP CPU: 0 PID: 13 Comm: ksoftirqd/0 Tainted: G S OE 5.15.0-bf.6.gef6992a #1 Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.0.2.12669 Apr 21 2023 pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige] lr : mlxbf_gige_poll+0x54/0x160 [mlxbf_gige] sp : ffff8000080d3c10 x29: ffff8000080d3c10 x28: ffffcce72cbb7000 x27: ffff8000080d3d58 x26: ffff0000814e7340 x25: ffff331cd1a05000 x24: ffffcce72c4ea008 x23: ffff0000814e4b40 x22: ffff0000814e4d10 x21: ffff0000814e4128 x20: 0000000000000000 x19: ffff0000814e4a80 x18: ffffffffffffffff x17: 000000000000001c x16: ffffcce72b4553f4 x15: ffff80008805b8a7 x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101 x11: 7f7f7f7f7f7f7f7f x10: c2ac898b17576267 x9 : ffffcce720fa5404 x8 : ffff000080812138 x7 : 0000000000002e9a x6 : 0000000000000080 x5 : ffff00008de3b000 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige] mlxbf_gige_poll+0x54/0x160 [mlxbf_gige] __napi_poll+0x40/0x1c8 net_rx_action+0x314/0x3a0 __do_softirq+0x128/0x334 run_ksoftirqd+0x54/0x6c smpboot_thread_fn+0x14c/0x190 kthread+0x10c/0x110 ret_from_fork+0x10/0x20 Code: 8b070000 f9000ea0 f95056c0 f86178a1 (b9407002) ---[ end trace 7cc3941aa0d8e6a4 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt Kernel Offset: 0x4ce722520000 from 0xffff800008000000 PHYS_OFFSET: 0x80000000 CPU features: 0x000005c1,a3330e5a Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- During system shutdown, the mlxbf_gige driver's shutdown() is always executed. However, the driver's stop() method will only execute if networking interface configuration logic within the Linux distribution has been setup to do so. If shutdown() executes but stop() does not execute, NAPI remains enabled and this can lead to an exception if NAPI is scheduled while the hardware interface has only been partially deinitialized. The networking interface managed by the mlxbf_gige driver must be properly stopped during system shutdown so that IFF_UP is cleared, the hardware interface is put into a clean state, and NAPI is fully deinitialized. |
| CVE-2024-35884 | In the Linux kernel, the following vulnerability has been resolved: udp: do not accept non-tunnel GSO skbs landing in a tunnel When rx-udp-gro-forwarding is enabled UDP packets might be GROed when being forwarded. If such packets might land in a tunnel this can cause various issues and udp_gro_receive makes sure this isn't the case by looking for a matching socket. This is performed in udp4/6_gro_lookup_skb but only in the current netns. This is an issue with tunneled packets when the endpoint is in another netns. In such cases the packets will be GROed at the UDP level, which leads to various issues later on. The same thing can happen with rx-gro-list. We saw this with geneve packets being GROed at the UDP level. In such case gso_size is set; later the packet goes through the geneve rx path, the geneve header is pulled, the offset are adjusted and frag_list skbs are not adjusted with regard to geneve. When those skbs hit skb_fragment, it will misbehave. Different outcomes are possible depending on what the GROed skbs look like; from corrupted packets to kernel crashes. One example is a BUG_ON[1] triggered in skb_segment while processing the frag_list. Because gso_size is wrong (geneve header was pulled) skb_segment thinks there is "geneve header size" of data in frag_list, although it's in fact the next packet. The BUG_ON itself has nothing to do with the issue. This is only one of the potential issues. Looking up for a matching socket in udp_gro_receive is fragile: the lookup could be extended to all netns (not speaking about performances) but nothing prevents those packets from being modified in between and we could still not find a matching socket. It's OK to keep the current logic there as it should cover most cases but we also need to make sure we handle tunnel packets being GROed too early. This is done by extending the checks in udp_unexpected_gso: GSO packets lacking the SKB_GSO_UDP_TUNNEL/_CSUM bits and landing in a tunnel must be segmented. [1] kernel BUG at net/core/skbuff.c:4408! RIP: 0010:skb_segment+0xd2a/0xf70 __udp_gso_segment+0xaa/0x560 |
| CVE-2024-35883 | In the Linux kernel, the following vulnerability has been resolved: spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe In function pci1xxxx_spi_probe, there is a potential null pointer that may be caused by a failed memory allocation by the function devm_kzalloc. Hence, a null pointer check needs to be added to prevent null pointer dereferencing later in the code. To fix this issue, spi_bus->spi_int[iter] should be checked. The memory allocated by devm_kzalloc will be automatically released, so just directly return -ENOMEM without worrying about memory leaks. |
| CVE-2024-35882 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP Jan Schunk reports that his small NFS servers suffer from memory exhaustion after just a few days. A bisect shows that commit e18e157bb5c8 ("SUNRPC: Send RPC message on TCP with a single sock_sendmsg() call") is the first bad commit. That commit assumed that sock_sendmsg() releases all the pages in the underlying bio_vec array, but the reality is that it doesn't. svc_xprt_release() releases the rqst's response pages, but the record marker page fragment isn't one of those, so it is never released. This is a narrow fix that can be applied to stable kernels. A more extensive fix is in the works. |
| CVE-2024-35880 | In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: hold io_buffer_list reference over mmap If we look up the kbuf, ensure that it doesn't get unregistered until after we're done with it. Since we're inside mmap, we cannot safely use the io_uring lock. Rely on the fact that we can lookup the buffer list under RCU now and grab a reference to it, preventing it from being unregistered until we're done with it. The lookup returns the io_buffer_list directly with it referenced. |
| CVE-2024-35879 | In the Linux kernel, the following vulnerability has been resolved: of: dynamic: Synchronize of_changeset_destroy() with the devlink removals In the following sequence: 1) of_platform_depopulate() 2) of_overlay_remove() During the step 1, devices are destroyed and devlinks are removed. During the step 2, OF nodes are destroyed but __of_changeset_entry_destroy() can raise warnings related to missing of_node_put(): ERROR: memory leak, expected refcount 1 instead of 2 ... Indeed, during the devlink removals performed at step 1, the removal itself releasing the device (and the attached of_node) is done by a job queued in a workqueue and so, it is done asynchronously with respect to function calls. When the warning is present, of_node_put() will be called but wrongly too late from the workqueue job. In order to be sure that any ongoing devlink removals are done before the of_node destruction, synchronize the of_changeset_destroy() with the devlink removals. |
| CVE-2024-35878 | In the Linux kernel, the following vulnerability has been resolved: of: module: prevent NULL pointer dereference in vsnprintf() In of_modalias(), we can get passed the str and len parameters which would cause a kernel oops in vsnprintf() since it only allows passing a NULL ptr when the length is also 0. Also, we need to filter out the negative values of the len parameter as these will result in a really huge buffer since snprintf() takes size_t parameter while ours is ssize_t... Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. |
| CVE-2024-35877 | In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: fix VM_PAT handling in COW mappings PAT handling won't do the right thing in COW mappings: the first PTE (or, in fact, all PTEs) can be replaced during write faults to point at anon folios. Reliably recovering the correct PFN and cachemode using follow_phys() from PTEs will not work in COW mappings. Using follow_phys(), we might just get the address+protection of the anon folio (which is very wrong), or fail on swap/nonswap entries, failing follow_phys() and triggering a WARN_ON_ONCE() in untrack_pfn() and track_pfn_copy(), not properly calling free_pfn_range(). In free_pfn_range(), we either wouldn't call memtype_free() or would call it with the wrong range, possibly leaking memory. To fix that, let's update follow_phys() to refuse returning anon folios, and fallback to using the stored PFN inside vma->vm_pgoff for COW mappings if we run into that. We will now properly handle untrack_pfn() with COW mappings, where we don't need the cachemode. We'll have to fail fork()->track_pfn_copy() if the first page was replaced by an anon folio, though: we'd have to store the cachemode in the VMA to make this work, likely growing the VMA size. For now, lets keep it simple and let track_pfn_copy() just fail in that case: it would have failed in the past with swap/nonswap entries already, and it would have done the wrong thing with anon folios. Simple reproducer to trigger the WARN_ON_ONCE() in untrack_pfn(): <--- C reproducer ---> #include <stdio.h> #include <sys/mman.h> #include <unistd.h> #include <liburing.h> int main(void) { struct io_uring_params p = {}; int ring_fd; size_t size; char *map; ring_fd = io_uring_setup(1, &p); if (ring_fd < 0) { perror("io_uring_setup"); return 1; } size = p.sq_off.array + p.sq_entries * sizeof(unsigned); /* Map the submission queue ring MAP_PRIVATE */ map = mmap(0, size, PROT_READ | PROT_WRITE, MAP_PRIVATE, ring_fd, IORING_OFF_SQ_RING); if (map == MAP_FAILED) { perror("mmap"); return 1; } /* We have at least one page. Let's COW it. */ *map = 0; pause(); return 0; } <--- C reproducer ---> On a system with 16 GiB RAM and swap configured: # ./iouring & # memhog 16G # killall iouring [ 301.552930] ------------[ cut here ]------------ [ 301.553285] WARNING: CPU: 7 PID: 1402 at arch/x86/mm/pat/memtype.c:1060 untrack_pfn+0xf4/0x100 [ 301.553989] Modules linked in: binfmt_misc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_g [ 301.558232] CPU: 7 PID: 1402 Comm: iouring Not tainted 6.7.5-100.fc38.x86_64 #1 [ 301.558772] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebu4 [ 301.559569] RIP: 0010:untrack_pfn+0xf4/0x100 [ 301.559893] Code: 75 c4 eb cf 48 8b 43 10 8b a8 e8 00 00 00 3b 6b 28 74 b8 48 8b 7b 30 e8 ea 1a f7 000 [ 301.561189] RSP: 0018:ffffba2c0377fab8 EFLAGS: 00010282 [ 301.561590] RAX: 00000000ffffffea RBX: ffff9208c8ce9cc0 RCX: 000000010455e047 [ 301.562105] RDX: 07fffffff0eb1e0a RSI: 0000000000000000 RDI: ffff9208c391d200 [ 301.562628] RBP: 0000000000000000 R08: ffffba2c0377fab8 R09: 0000000000000000 [ 301.563145] R10: ffff9208d2292d50 R11: 0000000000000002 R12: 00007fea890e0000 [ 301.563669] R13: 0000000000000000 R14: ffffba2c0377fc08 R15: 0000000000000000 [ 301.564186] FS: 0000000000000000(0000) GS:ffff920c2fbc0000(0000) knlGS:0000000000000000 [ 301.564773] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 301.565197] CR2: 00007fea88ee8a20 CR3: 00000001033a8000 CR4: 0000000000750ef0 [ 301.565725] PKRU: 55555554 [ 301.565944] Call Trace: [ 301.566148] <TASK> [ 301.566325] ? untrack_pfn+0xf4/0x100 [ 301.566618] ? __warn+0x81/0x130 [ 301.566876] ? untrack_pfn+0xf4/0x100 [ 3 ---truncated--- |
| CVE-2024-35875 | In the Linux kernel, the following vulnerability has been resolved: x86/coco: Require seeding RNG with RDRAND on CoCo systems There are few uses of CoCo that don't rely on working cryptography and hence a working RNG. Unfortunately, the CoCo threat model means that the VM host cannot be trusted and may actively work against guests to extract secrets or manipulate computation. Since a malicious host can modify or observe nearly all inputs to guests, the only remaining source of entropy for CoCo guests is RDRAND. If RDRAND is broken -- due to CPU hardware fault -- the RNG as a whole is meant to gracefully continue on gathering entropy from other sources, but since there aren't other sources on CoCo, this is catastrophic. This is mostly a concern at boot time when initially seeding the RNG, as after that the consequences of a broken RDRAND are much more theoretical. So, try at boot to seed the RNG using 256 bits of RDRAND output. If this fails, panic(). This will also trigger if the system is booted without RDRAND, as RDRAND is essential for a safe CoCo boot. Add this deliberately to be "just a CoCo x86 driver feature" and not part of the RNG itself. Many device drivers and platforms have some desire to contribute something to the RNG, and add_device_randomness() is specifically meant for this purpose. Any driver can call it with seed data of any quality, or even garbage quality, and it can only possibly make the quality of the RNG better or have no effect, but can never make it worse. Rather than trying to build something into the core of the RNG, consider the particular CoCo issue just a CoCo issue, and therefore separate it all out into driver (well, arch/platform) code. [ bp: Massage commit message. ] |
| CVE-2024-35874 | In the Linux kernel, the following vulnerability has been resolved: aio: Fix null ptr deref in aio_complete() wakeup list_del_init_careful() needs to be the last access to the wait queue entry - it effectively unlocks access. Previously, finish_wait() would see the empty list head and skip taking the lock, and then we'd return - but the completion path would still attempt to do the wakeup after the task_struct pointer had been overwritten. |
| CVE-2024-35873 | In the Linux kernel, the following vulnerability has been resolved: riscv: Fix vector state restore in rt_sigreturn() The RISC-V Vector specification states in "Appendix D: Calling Convention for Vector State" [1] that "Executing a system call causes all caller-saved vector registers (v0-v31, vl, vtype) and vstart to become unspecified.". In the RISC-V kernel this is called "discarding the vstate". Returning from a signal handler via the rt_sigreturn() syscall, vector discard is also performed. However, this is not an issue since the vector state should be restored from the sigcontext, and therefore not care about the vector discard. The "live state" is the actual vector register in the running context, and the "vstate" is the vector state of the task. A dirty live state, means that the vstate and live state are not in synch. When vectorized user_from_copy() was introduced, an bug sneaked in at the restoration code, related to the discard of the live state. An example when this go wrong: 1. A userland application is executing vector code 2. The application receives a signal, and the signal handler is entered. 3. The application returns from the signal handler, using the rt_sigreturn() syscall. 4. The live vector state is discarded upon entering the rt_sigreturn(), and the live state is marked as "dirty", indicating that the live state need to be synchronized with the current vstate. 5. rt_sigreturn() restores the vstate, except the Vector registers, from the sigcontext 6. rt_sigreturn() restores the Vector registers, from the sigcontext, and now the vectorized user_from_copy() is used. The dirty live state from the discard is saved to the vstate, making the vstate corrupt. 7. rt_sigreturn() returns to the application, which crashes due to corrupted vstate. Note that the vectorized user_from_copy() is invoked depending on the value of CONFIG_RISCV_ISA_V_UCOPY_THRESHOLD. Default is 768, which means that vlen has to be larger than 128b for this bug to trigger. The fix is simply to mark the live state as non-dirty/clean prior performing the vstate restore. |
| CVE-2024-35872 | In the Linux kernel, the following vulnerability has been resolved: mm/secretmem: fix GUP-fast succeeding on secretmem folios folio_is_secretmem() currently relies on secretmem folios being LRU folios, to save some cycles. However, folios might reside in a folio batch without the LRU flag set, or temporarily have their LRU flag cleared. Consequently, the LRU flag is unreliable for this purpose. In particular, this is the case when secretmem_fault() allocates a fresh page and calls filemap_add_folio()->folio_add_lru(). The folio might be added to the per-cpu folio batch and won't get the LRU flag set until the batch was drained using e.g., lru_add_drain(). Consequently, folio_is_secretmem() might not detect secretmem folios and GUP-fast can succeed in grabbing a secretmem folio, crashing the kernel when we would later try reading/writing to the folio, because the folio has been unmapped from the directmap. Fix it by removing that unreliable check. |
| CVE-2024-35871 | In the Linux kernel, the following vulnerability has been resolved: riscv: process: Fix kernel gp leakage childregs represents the registers which are active for the new thread in user context. For a kernel thread, childregs->gp is never used since the kernel gp is not touched by switch_to. For a user mode helper, the gp value can be observed in user space after execve or possibly by other means. [From the email thread] The /* Kernel thread */ comment is somewhat inaccurate in that it is also used for user_mode_helper threads, which exec a user process, e.g. /sbin/init or when /proc/sys/kernel/core_pattern is a pipe. Such threads do not have PF_KTHREAD set and are valid targets for ptrace etc. even before they exec. childregs is the *user* context during syscall execution and it is observable from userspace in at least five ways: 1. kernel_execve does not currently clear integer registers, so the starting register state for PID 1 and other user processes started by the kernel has sp = user stack, gp = kernel __global_pointer$, all other integer registers zeroed by the memset in the patch comment. This is a bug in its own right, but I'm unwilling to bet that it is the only way to exploit the issue addressed by this patch. 2. ptrace(PTRACE_GETREGSET): you can PTRACE_ATTACH to a user_mode_helper thread before it execs, but ptrace requires SIGSTOP to be delivered which can only happen at user/kernel boundaries. 3. /proc/*/task/*/syscall: this is perfectly happy to read pt_regs for user_mode_helpers before the exec completes, but gp is not one of the registers it returns. 4. PERF_SAMPLE_REGS_USER: LOCKDOWN_PERF normally prevents access to kernel addresses via PERF_SAMPLE_REGS_INTR, but due to this bug kernel addresses are also exposed via PERF_SAMPLE_REGS_USER which is permitted under LOCKDOWN_PERF. I have not attempted to write exploit code. 5. Much of the tracing infrastructure allows access to user registers. I have not attempted to determine which forms of tracing allow access to user registers without already allowing access to kernel registers. |
| CVE-2024-35870 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF in smb2_reconnect_server() The UAF bug is due to smb2_reconnect_server() accessing a session that is already being teared down by another thread that is executing __cifs_put_smb_ses(). This can happen when (a) the client has connection to the server but no session or (b) another thread ends up setting @ses->ses_status again to something different than SES_EXITING. To fix this, we need to make sure to unconditionally set @ses->ses_status to SES_EXITING and prevent any other threads from setting a new status while we're still tearing it down. The following can be reproduced by adding some delay to right after the ipc is freed in __cifs_put_smb_ses() - which will give smb2_reconnect_server() worker a chance to run and then accessing @ses->ipc: kinit ... mount.cifs //srv/share /mnt/1 -o sec=krb5,nohandlecache,echo_interval=10 [disconnect srv] ls /mnt/1 &>/dev/null sleep 30 kdestroy [reconnect srv] sleep 10 umount /mnt/1 ... CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed CIFS: VFS: \\srv Send error in SessSetup = -126 CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed CIFS: VFS: \\srv Send error in SessSetup = -126 general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 Workqueue: cifsiod smb2_reconnect_server [cifs] RIP: 0010:__list_del_entry_valid_or_report+0x33/0xf0 Code: 4f 08 48 85 d2 74 42 48 85 c9 74 59 48 b8 00 01 00 00 00 00 ad de 48 39 c2 74 61 48 b8 22 01 00 00 00 00 74 69 <48> 8b 01 48 39 f8 75 7b 48 8b 72 08 48 39 c6 0f 85 88 00 00 00 b8 RSP: 0018:ffffc900001bfd70 EFLAGS: 00010a83 RAX: dead000000000122 RBX: ffff88810da53838 RCX: 6b6b6b6b6b6b6b6b RDX: 6b6b6b6b6b6b6b6b RSI: ffffffffc02f6878 RDI: ffff88810da53800 RBP: ffff88810da53800 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88810c064000 R13: 0000000000000001 R14: ffff88810c064000 R15: ffff8881039cc000 FS: 0000000000000000(0000) GS:ffff888157c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe3728b1000 CR3: 000000010caa4000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x36/0x90 ? exc_general_protection+0x1c1/0x3f0 ? asm_exc_general_protection+0x26/0x30 ? __list_del_entry_valid_or_report+0x33/0xf0 __cifs_put_smb_ses+0x1ae/0x500 [cifs] smb2_reconnect_server+0x4ed/0x710 [cifs] process_one_work+0x205/0x6b0 worker_thread+0x191/0x360 ? __pfx_worker_thread+0x10/0x10 kthread+0xe2/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> |
| CVE-2024-35869 | In the Linux kernel, the following vulnerability has been resolved: smb: client: guarantee refcounted children from parent session Avoid potential use-after-free bugs when walking DFS referrals, mounting and performing DFS failover by ensuring that all children from parent @tcon->ses are also refcounted. They're all needed across the entire DFS mount. Get rid of @tcon->dfs_ses_list while we're at it, too. |
| CVE-2024-35868 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_stats_proc_write() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF. |
| CVE-2024-35867 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_stats_proc_show() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF. |
| CVE-2024-35866 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_dump_full_key() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF. |
| CVE-2024-35865 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_is_valid_oplock_break() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF. |
| CVE-2024-35864 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_is_valid_lease_break() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF. |
| CVE-2024-35863 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in is_valid_oplock_break() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF. |
| CVE-2024-35862 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_is_network_name_deleted() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF. |
| CVE-2024-35861 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF. |
| CVE-2024-35860 | In the Linux kernel, the following vulnerability has been resolved: bpf: support deferring bpf_link dealloc to after RCU grace period BPF link for some program types is passed as a "context" which can be used by those BPF programs to look up additional information. E.g., for multi-kprobes and multi-uprobes, link is used to fetch BPF cookie values. Because of this runtime dependency, when bpf_link refcnt drops to zero there could still be active BPF programs running accessing link data. This patch adds generic support to defer bpf_link dealloc callback to after RCU GP, if requested. This is done by exposing two different deallocation callbacks, one synchronous and one deferred. If deferred one is provided, bpf_link_free() will schedule dealloc_deferred() callback to happen after RCU GP. BPF is using two flavors of RCU: "classic" non-sleepable one and RCU tasks trace one. The latter is used when sleepable BPF programs are used. bpf_link_free() accommodates that by checking underlying BPF program's sleepable flag, and goes either through normal RCU GP only for non-sleepable, or through RCU tasks trace GP *and* then normal RCU GP (taking into account rcu_trace_implies_rcu_gp() optimization), if BPF program is sleepable. We use this for multi-kprobe and multi-uprobe links, which dereference link during program run. We also preventively switch raw_tp link to use deferred dealloc callback, as upcoming changes in bpf-next tree expose raw_tp link data (specifically, cookie value) to BPF program at runtime as well. |
| CVE-2024-35859 | In the Linux kernel, the following vulnerability has been resolved: block: fix module reference leakage from bdev_open_by_dev error path At the time bdev_may_open() is called, module reference is grabbed already, hence module reference should be released if bdev_may_open() failed. This problem is found by code review. |
| CVE-2024-35858 | In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix memory leak when bringing down interface When bringing down the TX rings we flush the rings but forget to reclaimed the flushed packets. This leads to a memory leak since we do not free the dma mapped buffers. This also leads to tx control block corruption when bringing down the interface for power management. |
| CVE-2024-35857 | In the Linux kernel, the following vulnerability has been resolved: icmp: prevent possible NULL dereferences from icmp_build_probe() First problem is a double call to __in_dev_get_rcu(), because the second one could return NULL. if (__in_dev_get_rcu(dev) && __in_dev_get_rcu(dev)->ifa_list) Second problem is a read from dev->ip6_ptr with no NULL check: if (!list_empty(&rcu_dereference(dev->ip6_ptr)->addr_list)) Use the correct RCU API to fix these. v2: add missing include <net/addrconf.h> |
| CVE-2024-35856 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: mediatek: Fix double free of skb in coredump hci_devcd_append() would free the skb on error so the caller don't have to free it again otherwise it would cause the double free of skb. Reported-by : Dan Carpenter <[email protected]> |
| CVE-2024-35855 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix possible use-after-free during activity update The rule activity update delayed work periodically traverses the list of configured rules and queries their activity from the device. As part of this task it accesses the entry pointed by 'ventry->entry', but this entry can be changed concurrently by the rehash delayed work, leading to a use-after-free [1]. Fix by closing the race and perform the activity query under the 'vregion->lock' mutex. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 Read of size 8 at addr ffff8881054ed808 by task kworker/0:18/181 CPU: 0 PID: 181 Comm: kworker/0:18 Not tainted 6.9.0-rc2-custom-00781-gd5ab772d32f7 #2 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 mlxsw_sp_acl_rule_activity_update_work+0x219/0x400 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_entry_create+0x7b/0x1f0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x30d/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3d7/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 |
| CVE-2024-35854 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash The rehash delayed work migrates filters from one region to another according to the number of available credits. The migrated from region is destroyed at the end of the work if the number of credits is non-negative as the assumption is that this is indicative of migration being complete. This assumption is incorrect as a non-negative number of credits can also be the result of a failed migration. The destruction of a region that still has filters referencing it can result in a use-after-free [1]. Fix by not destroying the region if migration failed. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 Read of size 8 at addr ffff8881735319e8 by task kworker/0:31/3858 CPU: 0 PID: 3858 Comm: kworker/0:31 Tainted: G W 6.9.0-rc2-custom-00782-gf2275c2157d8 #5 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 mlxsw_sp_acl_ctcam_entry_del+0x2e/0x70 mlxsw_sp_acl_atcam_entry_del+0x81/0x210 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3cd/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 174: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_region_create+0xdf/0x9c0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x954/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 7: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_region_destroy+0x272/0x310 mlxsw_sp_acl_tcam_vregion_rehash_work+0x731/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 |
| CVE-2024-35853 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix memory leak during rehash The rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. If the migration fails, the code tries to migrate the filters back to the old region. However, the rollback itself can also fail in which case another migration will be erroneously performed. Besides the fact that this ping pong is not a very good idea, it also creates a problem. Each virtual chunk references two chunks: The currently used one ('vchunk->chunk') and a backup ('vchunk->chunk2'). During migration the first holds the chunk we want to migrate filters to and the second holds the chunk we are migrating filters from. The code currently assumes - but does not verify - that the backup chunk does not exist (NULL) if the currently used chunk does not reference the target region. This assumption breaks when we are trying to rollback a rollback, resulting in the backup chunk being overwritten and leaked [1]. Fix by not rolling back a failed rollback and add a warning to avoid future cases. [1] WARNING: CPU: 5 PID: 1063 at lib/parman.c:291 parman_destroy+0x17/0x20 Modules linked in: CPU: 5 PID: 1063 Comm: kworker/5:11 Tainted: G W 6.9.0-rc2-custom-00784-gc6a05c468a0b #14 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:parman_destroy+0x17/0x20 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_region_fini+0x19/0x60 mlxsw_sp_acl_tcam_region_destroy+0x49/0xf0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x1f1/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> |
| CVE-2024-35852 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix memory leak when canceling rehash work The rehash delayed work is rescheduled with a delay if the number of credits at end of the work is not negative as supposedly it means that the migration ended. Otherwise, it is rescheduled immediately. After "mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash" the above is no longer accurate as a non-negative number of credits is no longer indicative of the migration being done. It can also happen if the work encountered an error in which case the migration will resume the next time the work is scheduled. The significance of the above is that it is possible for the work to be pending and associated with hints that were allocated when the migration started. This leads to the hints being leaked [1] when the work is canceled while pending as part of ACL region dismantle. Fix by freeing the hints if hints are associated with a work that was canceled while pending. Blame the original commit since the reliance on not having a pending work associated with hints is fragile. [1] unreferenced object 0xffff88810e7c3000 (size 256): comm "kworker/0:16", pid 176, jiffies 4295460353 hex dump (first 32 bytes): 00 30 95 11 81 88 ff ff 61 00 00 00 00 00 00 80 .0......a....... 00 00 61 00 40 00 00 00 00 00 00 00 04 00 00 00 ..a.@........... backtrace (crc 2544ddb9): [<00000000cf8cfab3>] kmalloc_trace+0x23f/0x2a0 [<000000004d9a1ad9>] objagg_hints_get+0x42/0x390 [<000000000b143cf3>] mlxsw_sp_acl_erp_rehash_hints_get+0xca/0x400 [<0000000059bdb60a>] mlxsw_sp_acl_tcam_vregion_rehash_work+0x868/0x1160 [<00000000e81fd734>] process_one_work+0x59c/0xf20 [<00000000ceee9e81>] worker_thread+0x799/0x12c0 [<00000000bda6fe39>] kthread+0x246/0x300 [<0000000070056d23>] ret_from_fork+0x34/0x70 [<00000000dea2b93e>] ret_from_fork_asm+0x1a/0x30 |
| CVE-2024-35851 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NULL-deref on non-serdev suspend Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when wakeup() is called for a non-serdev controller during suspend. Just return true for now to restore the original behaviour and address the crash with pre-6.2 kernels, which do not have commit e9b3e5b8c657 ("Bluetooth: hci_qca: only assign wakeup with serial port support") that causes the crash to happen already at setup() time. |
| CVE-2024-35850 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NULL-deref on non-serdev setup Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when setup() is called for a non-serdev controller. |
| CVE-2024-35849 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix information leak in btrfs_ioctl_logical_to_ino() Syzbot reported the following information leak for in btrfs_ioctl_logical_to_ino(): BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x110 lib/usercopy.c:40 instrument_copy_to_user include/linux/instrumented.h:114 [inline] _copy_to_user+0xbc/0x110 lib/usercopy.c:40 copy_to_user include/linux/uaccess.h:191 [inline] btrfs_ioctl_logical_to_ino+0x440/0x750 fs/btrfs/ioctl.c:3499 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: __kmalloc_large_node+0x231/0x370 mm/slub.c:3921 __do_kmalloc_node mm/slub.c:3954 [inline] __kmalloc_node+0xb07/0x1060 mm/slub.c:3973 kmalloc_node include/linux/slab.h:648 [inline] kvmalloc_node+0xc0/0x2d0 mm/util.c:634 kvmalloc include/linux/slab.h:766 [inline] init_data_container+0x49/0x1e0 fs/btrfs/backref.c:2779 btrfs_ioctl_logical_to_ino+0x17c/0x750 fs/btrfs/ioctl.c:3480 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Bytes 40-65535 of 65536 are uninitialized Memory access of size 65536 starts at ffff888045a40000 This happens, because we're copying a 'struct btrfs_data_container' back to user-space. This btrfs_data_container is allocated in 'init_data_container()' via kvmalloc(), which does not zero-fill the memory. Fix this by using kvzalloc() which zeroes out the memory on allocation. |
| CVE-2024-35848 | In the Linux kernel, the following vulnerability has been resolved: eeprom: at24: fix memory corruption race condition If the eeprom is not accessible, an nvmem device will be registered, the read will fail, and the device will be torn down. If another driver accesses the nvmem device after the teardown, it will reference invalid memory. Move the failure point before registering the nvmem device. |
| CVE-2024-35847 | In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Prevent double free on error The error handling path in its_vpe_irq_domain_alloc() causes a double free when its_vpe_init() fails after successfully allocating at least one interrupt. This happens because its_vpe_irq_domain_free() frees the interrupts along with the area bitmap and the vprop_page and its_vpe_irq_domain_alloc() subsequently frees the area bitmap and the vprop_page again. Fix this by unconditionally invoking its_vpe_irq_domain_free() which handles all cases correctly and by removing the bitmap/vprop_page freeing from its_vpe_irq_domain_alloc(). [ tglx: Massaged change log ] |
| CVE-2024-35846 | In the Linux kernel, the following vulnerability has been resolved: mm: zswap: fix shrinker NULL crash with cgroup_disable=memory Christian reports a NULL deref in zswap that he bisected down to the zswap shrinker. The issue also cropped up in the bug trackers of libguestfs [1] and the Red Hat bugzilla [2]. The problem is that when memcg is disabled with the boot time flag, the zswap shrinker might get called with sc->memcg == NULL. This is okay in many places, like the lruvec operations. But it crashes in memcg_page_state() - which is only used due to the non-node accounting of cgroup's the zswap memory to begin with. Nhat spotted that the memcg can be NULL in the memcg-disabled case, and I was then able to reproduce the crash locally as well. [1] https://github.com/libguestfs/libguestfs/issues/139 [2] https://bugzilla.redhat.com/show_bug.cgi?id=2275252 |
| CVE-2024-35845 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: dbg-tlv: ensure NUL termination The iwl_fw_ini_debug_info_tlv is used as a string, so we must ensure the string is terminated correctly before using it. |
| CVE-2024-35844 | In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix reserve_cblocks counting error when out of space When a file only needs one direct_node, performing the following operations will cause the file to be unrepairable: unisoc # ./f2fs_io compress test.apk unisoc #df -h | grep dm-48 /dev/block/dm-48 112G 112G 1.2M 100% /data unisoc # ./f2fs_io release_cblocks test.apk 924 unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 4.8M 100% /data unisoc # dd if=/dev/random of=file4 bs=1M count=3 3145728 bytes (3.0 M) copied, 0.025 s, 120 M/s unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 1.8M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk F2FS_IOC_RESERVE_COMPRESS_BLOCKS failed: No space left on device adb reboot unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 11M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk 0 This is because the file has only one direct_node. After returning to -ENOSPC, reserved_blocks += ret will not be executed. As a result, the reserved_blocks at this time is still 0, which is not the real number of reserved blocks. Therefore, fsck cannot be set to repair the file. After this patch, the fsck flag will be set to fix this problem. unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 1.8M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk F2FS_IOC_RESERVE_COMPRESS_BLOCKS failed: No space left on device adb reboot then fsck will be executed unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 11M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk 924 |
| CVE-2024-35843 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Use device rbtree in iopf reporting path The existing I/O page fault handler currently locates the PCI device by calling pci_get_domain_bus_and_slot(). This function searches the list of all PCI devices until the desired device is found. To improve lookup efficiency, replace it with device_rbtree_find() to search the device within the probed device rbtree. The I/O page fault is initiated by the device, which does not have any synchronization mechanism with the software to ensure that the device stays in the probed device tree. Theoretically, a device could be released by the IOMMU subsystem after device_rbtree_find() and before iopf_get_dev_fault_param(), which would cause a use-after-free problem. Add a mutex to synchronize the I/O page fault reporting path and the IOMMU release device path. This lock doesn't introduce any performance overhead, as the conflict between I/O page fault reporting and device releasing is very rare. |
| CVE-2024-35842 | In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: sof-common: Add NULL check for normal_link string It's not granted that all entries of struct sof_conn_stream declare a `normal_link` (a non-SOF, direct link) string, and this is the case for SoCs that support only SOF paths (hence do not support both direct and SOF usecases). For example, in the case of MT8188 there is no normal_link string in any of the sof_conn_stream entries and there will be more drivers doing that in the future. To avoid possible NULL pointer KPs, add a NULL check for `normal_link`. |
| CVE-2024-35841 | In the Linux kernel, the following vulnerability has been resolved: net: tls, fix WARNIING in __sk_msg_free A splice with MSG_SPLICE_PAGES will cause tls code to use the tls_sw_sendmsg_splice path in the TLS sendmsg code to move the user provided pages from the msg into the msg_pl. This will loop over the msg until msg_pl is full, checked by sk_msg_full(msg_pl). The user can also set the MORE flag to hint stack to delay sending until receiving more pages and ideally a full buffer. If the user adds more pages to the msg than can fit in the msg_pl scatterlist (MAX_MSG_FRAGS) we should ignore the MORE flag and send the buffer anyways. What actually happens though is we abort the msg to msg_pl scatterlist setup and then because we forget to set 'full record' indicating we can no longer consume data without a send we fallthrough to the 'continue' path which will check if msg_data_left(msg) has more bytes to send and then attempts to fit them in the already full msg_pl. Then next iteration of sender doing send will encounter a full msg_pl and throw the warning in the syzbot report. To fix simply check if we have a full_record in splice code path and if not send the msg regardless of MORE flag. |
| CVE-2024-35840 | In the Linux kernel, the following vulnerability has been resolved: mptcp: use OPTION_MPTCP_MPJ_SYNACK in subflow_finish_connect() subflow_finish_connect() uses four fields (backup, join_id, thmac, none) that may contain garbage unless OPTION_MPTCP_MPJ_SYNACK has been set in mptcp_parse_option() |
| CVE-2024-35839 | In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: replace physindev with physinif in nf_bridge_info An skb can be added to a neigh->arp_queue while waiting for an arp reply. Where original skb's skb->dev can be different to neigh's neigh->dev. For instance in case of bridging dnated skb from one veth to another, the skb would be added to a neigh->arp_queue of the bridge. As skb->dev can be reset back to nf_bridge->physindev and used, and as there is no explicit mechanism that prevents this physindev from been freed under us (for instance neigh_flush_dev doesn't cleanup skbs from different device's neigh queue) we can crash on e.g. this stack: arp_process neigh_update skb = __skb_dequeue(&neigh->arp_queue) neigh_resolve_output(..., skb) ... br_nf_dev_xmit br_nf_pre_routing_finish_bridge_slow skb->dev = nf_bridge->physindev br_handle_frame_finish Let's use plain ifindex instead of net_device link. To peek into the original net_device we will use dev_get_by_index_rcu(). Thus either we get device and are safe to use it or we don't get it and drop skb. |
| CVE-2024-35838 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix potential sta-link leak When a station is allocated, links are added but not set to valid yet (e.g. during connection to an AP MLD), we might remove the station without ever marking links valid, and leak them. Fix that. |
| CVE-2024-35837 | In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: clear BM pool before initialization Register value persist after booting the kernel using kexec which results in kernel panic. Thus clear the BM pool registers before initialisation to fix the issue. |
| CVE-2024-35836 | In the Linux kernel, the following vulnerability has been resolved: dpll: fix pin dump crash for rebound module When a kernel module is unbound but the pin resources were not entirely freed (other kernel module instance of the same PCI device have had kept the reference to that pin), and kernel module is again bound, the pin properties would not be updated (the properties are only assigned when memory for the pin is allocated), prop pointer still points to the kernel module memory of the kernel module which was deallocated on the unbind. If the pin dump is invoked in this state, the result is a kernel crash. Prevent the crash by storing persistent pin properties in dpll subsystem, copy the content from the kernel module when pin is allocated, instead of using memory of the kernel module. |
| CVE-2024-35835 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix a double-free in arfs_create_groups When `in` allocated by kvzalloc fails, arfs_create_groups will free ft->g and return an error. However, arfs_create_table, the only caller of arfs_create_groups, will hold this error and call to mlx5e_destroy_flow_table, in which the ft->g will be freed again. |
| CVE-2024-35834 | In the Linux kernel, the following vulnerability has been resolved: xsk: recycle buffer in case Rx queue was full Add missing xsk_buff_free() call when __xsk_rcv_zc() failed to produce descriptor to XSK Rx queue. |
| CVE-2024-35833 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA This dma_alloc_coherent() is undone neither in the remove function, nor in the error handling path of fsl_qdma_probe(). Switch to the managed version to fix both issues. |
| CVE-2024-35832 | In the Linux kernel, the following vulnerability has been resolved: bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exit bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut. It should be freed by kvfree not kfree. Or umount will triger: [ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008 [ 406.830676 ] #PF: supervisor read access in kernel mode [ 406.831643 ] #PF: error_code(0x0000) - not-present page [ 406.832487 ] PGD 0 P4D 0 [ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI [ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90 [ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 406.835796 ] RIP: 0010:kfree+0x62/0x140 [ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6 [ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286 [ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4 [ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000 [ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001 [ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80 [ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000 [ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000 [ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0 [ 406.841464 ] Call Trace: [ 406.841583 ] <TASK> [ 406.841682 ] ? __die+0x1f/0x70 [ 406.841828 ] ? page_fault_oops+0x159/0x470 [ 406.842014 ] ? fixup_exception+0x22/0x310 [ 406.842198 ] ? exc_page_fault+0x1ed/0x200 [ 406.842382 ] ? asm_exc_page_fault+0x22/0x30 [ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs] [ 406.842842 ] ? kfree+0x62/0x140 [ 406.842988 ] ? kfree+0x104/0x140 [ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs] [ 406.843390 ] kobject_put+0xb7/0x170 [ 406.843552 ] deactivate_locked_super+0x2f/0xa0 [ 406.843756 ] cleanup_mnt+0xba/0x150 [ 406.843917 ] task_work_run+0x59/0xa0 [ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0 [ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40 [ 406.844510 ] do_syscall_64+0x4e/0xf0 [ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 406.844907 ] RIP: 0033:0x7f0a2664e4fb |
| CVE-2024-35831 | In the Linux kernel, the following vulnerability has been resolved: io_uring: Fix release of pinned pages when __io_uaddr_map fails Looking at the error path of __io_uaddr_map, if we fail after pinning the pages for any reasons, ret will be set to -EINVAL and the error handler won't properly release the pinned pages. I didn't manage to trigger it without forcing a failure, but it can happen in real life when memory is heavily fragmented. |
| CVE-2024-35830 | In the Linux kernel, the following vulnerability has been resolved: media: tc358743: register v4l2 async device only after successful setup Ensure the device has been setup correctly before registering the v4l2 async device, thus allowing userspace to access. |
| CVE-2024-35829 | In the Linux kernel, the following vulnerability has been resolved: drm/lima: fix a memleak in lima_heap_alloc When lima_vm_map_bo fails, the resources need to be deallocated, or there will be memleaks. |
| CVE-2024-35828 | In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer() In the for statement of lbs_allocate_cmd_buffer(), if the allocation of cmdarray[i].cmdbuf fails, both cmdarray and cmdarray[i].cmdbuf needs to be freed. Otherwise, there will be memleaks in lbs_allocate_cmd_buffer(). |
| CVE-2024-35827 | In the Linux kernel, the following vulnerability has been resolved: io_uring/net: fix overflow check in io_recvmsg_mshot_prep() The "controllen" variable is type size_t (unsigned long). Casting it to int could lead to an integer underflow. The check_add_overflow() function considers the type of the destination which is type int. If we add two positive values and the result cannot fit in an integer then that's counted as an overflow. However, if we cast "controllen" to an int and it turns negative, then negative values *can* fit into an int type so there is no overflow. Good: 100 + (unsigned long)-4 = 96 <-- overflow Bad: 100 + (int)-4 = 96 <-- no overflow I deleted the cast of the sizeof() as well. That's not a bug but the cast is unnecessary. |
| CVE-2024-35826 | In the Linux kernel, the following vulnerability has been resolved: block: Fix page refcounts for unaligned buffers in __bio_release_pages() Fix an incorrect number of pages being released for buffers that do not start at the beginning of a page. |
| CVE-2024-35825 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: ncm: Fix handling of zero block length packets While connecting to a Linux host with CDC_NCM_NTB_DEF_SIZE_TX set to 65536, it has been observed that we receive short packets, which come at interval of 5-10 seconds sometimes and have block length zero but still contain 1-2 valid datagrams present. According to the NCM spec: "If wBlockLength = 0x0000, the block is terminated by a short packet. In this case, the USB transfer must still be shorter than dwNtbInMaxSize or dwNtbOutMaxSize. If exactly dwNtbInMaxSize or dwNtbOutMaxSize bytes are sent, and the size is a multiple of wMaxPacketSize for the given pipe, then no ZLP shall be sent. wBlockLength= 0x0000 must be used with extreme care, because of the possibility that the host and device may get out of sync, and because of test issues. wBlockLength = 0x0000 allows the sender to reduce latency by starting to send a very large NTB, and then shortening it when the sender discovers that there’s not sufficient data to justify sending a large NTB" However, there is a potential issue with the current implementation, as it checks for the occurrence of multiple NTBs in a single giveback by verifying if the leftover bytes to be processed is zero or not. If the block length reads zero, we would process the same NTB infintely because the leftover bytes is never zero and it leads to a crash. Fix this by bailing out if block length reads zero. |
| CVE-2024-35824 | In the Linux kernel, the following vulnerability has been resolved: misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume When not configured for wakeup lis3lv02d_i2c_suspend() will call lis3lv02d_poweroff() even if the device has already been turned off by the runtime-suspend handler and if configured for wakeup and the device is runtime-suspended at this point then it is not turned back on to serve as a wakeup source. Before commit b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable the regulators which as a side effect made calling poweroff() twice ok. Now that poweroff() correctly disables the regulators, doing this twice triggers a WARN() in the regulator core: unbalanced disables for regulator-dummy WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable ... Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if already runtime-suspended and add a poweron() call when necessary to make wakeup work. lis3lv02d_i2c_resume() has similar issues, with an added weirness that it always powers on the device if it is runtime suspended, after which the first runtime-resume will call poweron() again, causing the enabled count for the regulator to increase by 1 every suspend/resume. These unbalanced regulator_enable() calls cause the regulator to never be turned off and trigger the following WARN() on driver unbind: WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put Fix this by making lis3lv02d_i2c_resume() mirror the new suspend(). |
| CVE-2024-35823 | In the Linux kernel, the following vulnerability has been resolved: vt: fix unicode buffer corruption when deleting characters This is the same issue that was fixed for the VGA text buffer in commit 39cdb68c64d8 ("vt: fix memory overlapping when deleting chars in the buffer"). The cure is also the same i.e. replace memcpy() with memmove() due to the overlaping buffers. |
| CVE-2024-35822 | In the Linux kernel, the following vulnerability has been resolved: usb: udc: remove warning when queue disabled ep It is possible trigger below warning message from mass storage function, WARNING: CPU: 6 PID: 3839 at drivers/usb/gadget/udc/core.c:294 usb_ep_queue+0x7c/0x104 pc : usb_ep_queue+0x7c/0x104 lr : fsg_main_thread+0x494/0x1b3c Root cause is mass storage function try to queue request from main thread, but other thread may already disable ep when function disable. As there is no function failure in the driver, in order to avoid effort to fix warning, change WARN_ON_ONCE() in usb_ep_queue() to pr_debug(). |
| CVE-2024-35821 | In the Linux kernel, the following vulnerability has been resolved: ubifs: Set page uptodate in the correct place Page cache reads are lockless, so setting the freshly allocated page uptodate before we've overwritten it with the data it's supposed to have in it will allow a simultaneous reader to see old data. Move the call to SetPageUptodate into ubifs_write_end(), which is after we copied the new data into the page. |
| CVE-2024-35819 | In the Linux kernel, the following vulnerability has been resolved: soc: fsl: qbman: Use raw spinlock for cgr_lock smp_call_function always runs its callback in hard IRQ context, even on PREEMPT_RT, where spinlocks can sleep. So we need to use a raw spinlock for cgr_lock to ensure we aren't waiting on a sleeping task. Although this bug has existed for a while, it was not apparent until commit ef2a8d5478b9 ("net: dpaa: Adjust queue depth on rate change") which invokes smp_call_function_single via qman_update_cgr_safe every time a link goes up or down. |
| CVE-2024-35818 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: Define the __io_aw() hook as mmiowb() Commit fb24ea52f78e0d595852e ("drivers: Remove explicit invocations of mmiowb()") remove all mmiowb() in drivers, but it says: "NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation." The mmio in radeon_ring_commit() is protected by a mutex rather than a spinlock, but in the mutex fastpath it behaves similar to spinlock. We can add mmiowb() calls in the radeon driver but the maintainer says he doesn't like such a workaround, and radeon is not the only example of mutex protected mmio. So we should extend the mmiowb tracking system from spinlock to mutex, and maybe other locking primitives. This is not easy and error prone, so we solve it in the architectural code, by simply defining the __io_aw() hook as mmiowb(). And we no longer need to override queued_spin_unlock() so use the generic definition. Without this, we get such an error when run 'glxgears' on weak ordering architectures such as LoongArch: radeon 0000:04:00.0: ring 0 stalled for more than 10324msec radeon 0000:04:00.0: ring 3 stalled for more than 10240msec radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000001f412 last fence id 0x000000000001f414 on ring 3) radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000000f940 last fence id 0x000000000000f941 on ring 0) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) |
| CVE-2024-35817 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: amdgpu_ttm_gart_bind set gtt bound flag Otherwise after the GTT bo is released, the GTT and gart space is freed but amdgpu_ttm_backend_unbind will not clear the gart page table entry and leave valid mapping entry pointing to the stale system page. Then if GPU access the gart address mistakely, it will read undefined value instead page fault, harder to debug and reproduce the real issue. |
| CVE-2024-35816 | In the Linux kernel, the following vulnerability has been resolved: firewire: ohci: prevent leak of left-over IRQ on unbind Commit 5a95f1ded28691e6 ("firewire: ohci: use devres for requested IRQ") also removed the call to free_irq() in pci_remove(), leading to a leftover irq of devm_request_irq() at pci_disable_msi() in pci_remove() when unbinding the driver from the device remove_proc_entry: removing non-empty directory 'irq/136', leaking at least 'firewire_ohci' Call Trace: ? remove_proc_entry+0x19c/0x1c0 ? __warn+0x81/0x130 ? remove_proc_entry+0x19c/0x1c0 ? report_bug+0x171/0x1a0 ? console_unlock+0x78/0x120 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? remove_proc_entry+0x19c/0x1c0 unregister_irq_proc+0xf4/0x120 free_desc+0x3d/0xe0 ? kfree+0x29f/0x2f0 irq_free_descs+0x47/0x70 msi_domain_free_locked.part.0+0x19d/0x1d0 msi_domain_free_irqs_all_locked+0x81/0xc0 pci_free_msi_irqs+0x12/0x40 pci_disable_msi+0x4c/0x60 pci_remove+0x9d/0xc0 [firewire_ohci 01b483699bebf9cb07a3d69df0aa2bee71db1b26] pci_device_remove+0x37/0xa0 device_release_driver_internal+0x19f/0x200 unbind_store+0xa1/0xb0 remove irq with devm_free_irq() before pci_disable_msi() also remove it in fail_msi: of pci_probe() as this would lead to an identical leak |
| CVE-2024-35815 | In the Linux kernel, the following vulnerability has been resolved: fs/aio: Check IOCB_AIO_RW before the struct aio_kiocb conversion The first kiocb_set_cancel_fn() argument may point at a struct kiocb that is not embedded inside struct aio_kiocb. With the current code, depending on the compiler, the req->ki_ctx read happens either before the IOCB_AIO_RW test or after that test. Move the req->ki_ctx read such that it is guaranteed that the IOCB_AIO_RW test happens first. |
| CVE-2024-35814 | In the Linux kernel, the following vulnerability has been resolved: swiotlb: Fix double-allocation of slots due to broken alignment handling Commit bbb73a103fbb ("swiotlb: fix a braino in the alignment check fix"), which was a fix for commit 0eee5ae10256 ("swiotlb: fix slot alignment checks"), causes a functional regression with vsock in a virtual machine using bouncing via a restricted DMA SWIOTLB pool. When virtio allocates the virtqueues for the vsock device using dma_alloc_coherent(), the SWIOTLB search can return page-unaligned allocations if 'area->index' was left unaligned by a previous allocation from the buffer: # Final address in brackets is the SWIOTLB address returned to the caller | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1645-1649/7168 (0x98326800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1649-1653/7168 (0x98328800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1653-1657/7168 (0x9832a800) This ends badly (typically buffer corruption and/or a hang) because swiotlb_alloc() is expecting a page-aligned allocation and so blindly returns a pointer to the 'struct page' corresponding to the allocation, therefore double-allocating the first half (2KiB slot) of the 4KiB page. Fix the problem by treating the allocation alignment separately to any additional alignment requirements from the device, using the maximum of the two as the stride to search the buffer slots and taking care to ensure a minimum of page-alignment for buffers larger than a page. This also resolves swiotlb allocation failures occuring due to the inclusion of ~PAGE_MASK in 'iotlb_align_mask' for large allocations and resulting in alignment requirements exceeding swiotlb_max_mapping_size(). |
| CVE-2024-35813 | In the Linux kernel, the following vulnerability has been resolved: mmc: core: Avoid negative index with array access Commit 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") assigns prev_idata = idatas[i - 1], but doesn't check that the iterator i is greater than zero. Let's fix this by adding a check. |
| CVE-2024-35811 | In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix use-after-free bug in brcmf_cfg80211_detach This is the candidate patch of CVE-2023-47233 : https://nvd.nist.gov/vuln/detail/CVE-2023-47233 In brcm80211 driver,it starts with the following invoking chain to start init a timeout worker: ->brcmf_usb_probe ->brcmf_usb_probe_cb ->brcmf_attach ->brcmf_bus_started ->brcmf_cfg80211_attach ->wl_init_priv ->brcmf_init_escan ->INIT_WORK(&cfg->escan_timeout_work, brcmf_cfg80211_escan_timeout_worker); If we disconnect the USB by hotplug, it will call brcmf_usb_disconnect to make cleanup. The invoking chain is : brcmf_usb_disconnect ->brcmf_usb_disconnect_cb ->brcmf_detach ->brcmf_cfg80211_detach ->kfree(cfg); While the timeout woker may still be running. This will cause a use-after-free bug on cfg in brcmf_cfg80211_escan_timeout_worker. Fix it by deleting the timer and canceling the worker in brcmf_cfg80211_detach. [[email protected]: keep timer delete as is and cancel work just before free] |
| CVE-2024-35810 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix the lifetime of the bo cursor memory The cleanup can be dispatched while the atomic update is still active, which means that the memory acquired in the atomic update needs to not be invalidated by the cleanup. The buffer objects in vmw_plane_state instead of using the builtin map_and_cache were trying to handle the lifetime of the mapped memory themselves, leading to crashes. Use the map_and_cache instead of trying to manage the lifetime of the buffer objects held by the vmw_plane_state. Fixes kernel oops'es in IGT's kms_cursor_legacy forked-bo. |
| CVE-2024-35809 | In the Linux kernel, the following vulnerability has been resolved: PCI/PM: Drain runtime-idle callbacks before driver removal A race condition between the .runtime_idle() callback and the .remove() callback in the rtsx_pcr PCI driver leads to a kernel crash due to an unhandled page fault [1]. The problem is that rtsx_pci_runtime_idle() is not expected to be running after pm_runtime_get_sync() has been called, but the latter doesn't really guarantee that. It only guarantees that the suspend and resume callbacks will not be running when it returns. However, if a .runtime_idle() callback is already running when pm_runtime_get_sync() is called, the latter will notice that the runtime PM status of the device is RPM_ACTIVE and it will return right away without waiting for the former to complete. In fact, it cannot wait for .runtime_idle() to complete because it may be called from that callback (it arguably does not make much sense to do that, but it is not strictly prohibited). Thus in general, whoever is providing a .runtime_idle() callback needs to protect it from running in parallel with whatever code runs after pm_runtime_get_sync(). [Note that .runtime_idle() will not start after pm_runtime_get_sync() has returned, but it may continue running then if it has started earlier.] One way to address that race condition is to call pm_runtime_barrier() after pm_runtime_get_sync() (not before it, because a nonzero value of the runtime PM usage counter is necessary to prevent runtime PM callbacks from being invoked) to wait for the .runtime_idle() callback to complete should it be running at that point. A suitable place for doing that is in pci_device_remove() which calls pm_runtime_get_sync() before removing the driver, so it may as well call pm_runtime_barrier() subsequently, which will prevent the race in question from occurring, not just in the rtsx_pcr driver, but in any PCI drivers providing .runtime_idle() callbacks. |
| CVE-2024-35808 | In the Linux kernel, the following vulnerability has been resolved: md/dm-raid: don't call md_reap_sync_thread() directly Currently md_reap_sync_thread() is called from raid_message() directly without holding 'reconfig_mutex', this is definitely unsafe because md_reap_sync_thread() can change many fields that is protected by 'reconfig_mutex'. However, hold 'reconfig_mutex' here is still problematic because this will cause deadlock, for example, commit 130443d60b1b ("md: refactor idle/frozen_sync_thread() to fix deadlock"). Fix this problem by using stop_sync_thread() to unregister sync_thread, like md/raid did. |
| CVE-2024-35807 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix corruption during on-line resize We observed a corruption during on-line resize of a file system that is larger than 16 TiB with 4k block size. With having more then 2^32 blocks resize_inode is turned off by default by mke2fs. The issue can be reproduced on a smaller file system for convenience by explicitly turning off resize_inode. An on-line resize across an 8 GiB boundary (the size of a meta block group in this setup) then leads to a corruption: dev=/dev/<some_dev> # should be >= 16 GiB mkdir -p /corruption /sbin/mke2fs -t ext4 -b 4096 -O ^resize_inode $dev $((2 * 2**21 - 2**15)) mount -t ext4 $dev /corruption dd if=/dev/zero bs=4096 of=/corruption/test count=$((2*2**21 - 4*2**15)) sha1sum /corruption/test # 79d2658b39dcfd77274e435b0934028adafaab11 /corruption/test /sbin/resize2fs $dev $((2*2**21)) # drop page cache to force reload the block from disk echo 1 > /proc/sys/vm/drop_caches sha1sum /corruption/test # 3c2abc63cbf1a94c9e6977e0fbd72cd832c4d5c3 /corruption/test 2^21 = 2^15*2^6 equals 8 GiB whereof 2^15 is the number of blocks per block group and 2^6 are the number of block groups that make a meta block group. The last checksum might be different depending on how the file is laid out across the physical blocks. The actual corruption occurs at physical block 63*2^15 = 2064384 which would be the location of the backup of the meta block group's block descriptor. During the on-line resize the file system will be converted to meta_bg starting at s_first_meta_bg which is 2 in the example - meaning all block groups after 16 GiB. However, in ext4_flex_group_add we might add block groups that are not part of the first meta block group yet. In the reproducer we achieved this by substracting the size of a whole block group from the point where the meta block group would start. This must be considered when updating the backup block group descriptors to follow the non-meta_bg layout. The fix is to add a test whether the group to add is already part of the meta block group or not. |
| CVE-2024-35806 | In the Linux kernel, the following vulnerability has been resolved: soc: fsl: qbman: Always disable interrupts when taking cgr_lock smp_call_function_single disables IRQs when executing the callback. To prevent deadlocks, we must disable IRQs when taking cgr_lock elsewhere. This is already done by qman_update_cgr and qman_delete_cgr; fix the other lockers. |
| CVE-2024-35805 | In the Linux kernel, the following vulnerability has been resolved: dm snapshot: fix lockup in dm_exception_table_exit There was reported lockup when we exit a snapshot with many exceptions. Fix this by adding "cond_resched" to the loop that frees the exceptions. |
| CVE-2024-35804 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Mark target gfn of emulated atomic instruction as dirty When emulating an atomic access on behalf of the guest, mark the target gfn dirty if the CMPXCHG by KVM is attempted and doesn't fault. This fixes a bug where KVM effectively corrupts guest memory during live migration by writing to guest memory without informing userspace that the page is dirty. Marking the page dirty got unintentionally dropped when KVM's emulated CMPXCHG was converted to do a user access. Before that, KVM explicitly mapped the guest page into kernel memory, and marked the page dirty during the unmap phase. Mark the page dirty even if the CMPXCHG fails, as the old data is written back on failure, i.e. the page is still written. The value written is guaranteed to be the same because the operation is atomic, but KVM's ABI is that all writes are dirty logged regardless of the value written. And more importantly, that's what KVM did before the buggy commit. Huge kudos to the folks on the Cc list (and many others), who did all the actual work of triaging and debugging. base-commit: 6769ea8da8a93ed4630f1ce64df6aafcaabfce64 |
| CVE-2024-35803 | In the Linux kernel, the following vulnerability has been resolved: x86/efistub: Call mixed mode boot services on the firmware's stack Normally, the EFI stub calls into the EFI boot services using the stack that was live when the stub was entered. According to the UEFI spec, this stack needs to be at least 128k in size - this might seem large but all asynchronous processing and event handling in EFI runs from the same stack and so quite a lot of space may be used in practice. In mixed mode, the situation is a bit different: the bootloader calls the 32-bit EFI stub entry point, which calls the decompressor's 32-bit entry point, where the boot stack is set up, using a fixed allocation of 16k. This stack is still in use when the EFI stub is started in 64-bit mode, and so all calls back into the EFI firmware will be using the decompressor's limited boot stack. Due to the placement of the boot stack right after the boot heap, any stack overruns have gone unnoticed. However, commit 5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code") moved the definition of the boot heap into C code, and now the boot stack is placed right at the base of BSS, where any overruns will corrupt the end of the .data section. While it would be possible to work around this by increasing the size of the boot stack, doing so would affect all x86 systems, and mixed mode systems are a tiny (and shrinking) fraction of the x86 installed base. So instead, record the firmware stack pointer value when entering from the 32-bit firmware, and switch to this stack every time a EFI boot service call is made. |
| CVE-2024-35801 | In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in order to avoid unnecessary writes to the MSR. On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which wipes out any stale state. But the per CPU cached xfd value is not reset, which brings them out of sync. As a consequence a subsequent xfd_update_state() might fail to update the MSR which in turn can result in XRSTOR raising a #NM in kernel space, which crashes the kernel. To fix this, introduce xfd_set_state() to write xfd_state together with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD. |
| CVE-2024-35800 | In the Linux kernel, the following vulnerability has been resolved: efi: fix panic in kdump kernel Check if get_next_variable() is actually valid pointer before calling it. In kdump kernel this method is set to NULL that causes panic during the kexec-ed kernel boot. Tested with QEMU and OVMF firmware. |
| CVE-2024-35799 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Prevent crash when disable stream [Why] Disabling stream encoder invokes a function that no longer exists. [How] Check if the function declaration is NULL in disable stream encoder. |
| CVE-2024-35798 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race in read_extent_buffer_pages() There are reports from tree-checker that detects corrupted nodes, without any obvious pattern so possibly an overwrite in memory. After some debugging it turns out there's a race when reading an extent buffer the uptodate status can be missed. To prevent concurrent reads for the same extent buffer, read_extent_buffer_pages() performs these checks: /* (1) */ if (test_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags)) return 0; /* (2) */ if (test_and_set_bit(EXTENT_BUFFER_READING, &eb->bflags)) goto done; At this point, it seems safe to start the actual read operation. Once that completes, end_bbio_meta_read() does /* (3) */ set_extent_buffer_uptodate(eb); /* (4) */ clear_bit(EXTENT_BUFFER_READING, &eb->bflags); Normally, this is enough to ensure only one read happens, and all other callers wait for it to finish before returning. Unfortunately, there is a racey interleaving: Thread A | Thread B | Thread C ---------+----------+--------- (1) | | | (1) | (2) | | (3) | | (4) | | | (2) | | | (1) When this happens, thread B kicks of an unnecessary read. Worse, thread C will see UPTODATE set and return immediately, while the read from thread B is still in progress. This race could result in tree-checker errors like this as the extent buffer is concurrently modified: BTRFS critical (device dm-0): corrupted node, root=256 block=8550954455682405139 owner mismatch, have 11858205567642294356 expect [256, 18446744073709551360] Fix it by testing UPTODATE again after setting the READING bit, and if it's been set, skip the unnecessary read. [ minor update of changelog ] |
| CVE-2024-35797 | In the Linux kernel, the following vulnerability has been resolved: mm: cachestat: fix two shmem bugs When cachestat on shmem races with swapping and invalidation, there are two possible bugs: 1) A swapin error can have resulted in a poisoned swap entry in the shmem inode's xarray. Calling get_shadow_from_swap_cache() on it will result in an out-of-bounds access to swapper_spaces[]. Validate the entry with non_swap_entry() before going further. 2) When we find a valid swap entry in the shmem's inode, the shadow entry in the swapcache might not exist yet: swap IO is still in progress and we're before __remove_mapping; swapin, invalidation, or swapoff have removed the shadow from swapcache after we saw the shmem swap entry. This will send a NULL to workingset_test_recent(). The latter purely operates on pointer bits, so it won't crash - node 0, memcg ID 0, eviction timestamp 0, etc. are all valid inputs - but it's a bogus test. In theory that could result in a false "recently evicted" count. Such a false positive wouldn't be the end of the world. But for code clarity and (future) robustness, be explicit about this case. Bail on get_shadow_from_swap_cache() returning NULL. |
| CVE-2024-35796 | In the Linux kernel, the following vulnerability has been resolved: net: ll_temac: platform_get_resource replaced by wrong function The function platform_get_resource was replaced with devm_platform_ioremap_resource_byname and is called using 0 as name. This eventually ends up in platform_get_resource_byname in the call stack, where it causes a null pointer in strcmp. if (type == resource_type(r) && !strcmp(r->name, name)) It should have been replaced with devm_platform_ioremap_resource. |
| CVE-2024-35795 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix deadlock while reading mqd from debugfs An errant disk backup on my desktop got into debugfs and triggered the following deadlock scenario in the amdgpu debugfs files. The machine also hard-resets immediately after those lines are printed (although I wasn't able to reproduce that part when reading by hand): [ 1318.016074][ T1082] ====================================================== [ 1318.016607][ T1082] WARNING: possible circular locking dependency detected [ 1318.017107][ T1082] 6.8.0-rc7-00015-ge0c8221b72c0 #17 Not tainted [ 1318.017598][ T1082] ------------------------------------------------------ [ 1318.018096][ T1082] tar/1082 is trying to acquire lock: [ 1318.018585][ T1082] ffff98c44175d6a0 (&mm->mmap_lock){++++}-{3:3}, at: __might_fault+0x40/0x80 [ 1318.019084][ T1082] [ 1318.019084][ T1082] but task is already holding lock: [ 1318.020052][ T1082] ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu] [ 1318.020607][ T1082] [ 1318.020607][ T1082] which lock already depends on the new lock. [ 1318.020607][ T1082] [ 1318.022081][ T1082] [ 1318.022081][ T1082] the existing dependency chain (in reverse order) is: [ 1318.023083][ T1082] [ 1318.023083][ T1082] -> #2 (reservation_ww_class_mutex){+.+.}-{3:3}: [ 1318.024114][ T1082] __ww_mutex_lock.constprop.0+0xe0/0x12f0 [ 1318.024639][ T1082] ww_mutex_lock+0x32/0x90 [ 1318.025161][ T1082] dma_resv_lockdep+0x18a/0x330 [ 1318.025683][ T1082] do_one_initcall+0x6a/0x350 [ 1318.026210][ T1082] kernel_init_freeable+0x1a3/0x310 [ 1318.026728][ T1082] kernel_init+0x15/0x1a0 [ 1318.027242][ T1082] ret_from_fork+0x2c/0x40 [ 1318.027759][ T1082] ret_from_fork_asm+0x11/0x20 [ 1318.028281][ T1082] [ 1318.028281][ T1082] -> #1 (reservation_ww_class_acquire){+.+.}-{0:0}: [ 1318.029297][ T1082] dma_resv_lockdep+0x16c/0x330 [ 1318.029790][ T1082] do_one_initcall+0x6a/0x350 [ 1318.030263][ T1082] kernel_init_freeable+0x1a3/0x310 [ 1318.030722][ T1082] kernel_init+0x15/0x1a0 [ 1318.031168][ T1082] ret_from_fork+0x2c/0x40 [ 1318.031598][ T1082] ret_from_fork_asm+0x11/0x20 [ 1318.032011][ T1082] [ 1318.032011][ T1082] -> #0 (&mm->mmap_lock){++++}-{3:3}: [ 1318.032778][ T1082] __lock_acquire+0x14bf/0x2680 [ 1318.033141][ T1082] lock_acquire+0xcd/0x2c0 [ 1318.033487][ T1082] __might_fault+0x58/0x80 [ 1318.033814][ T1082] amdgpu_debugfs_mqd_read+0x103/0x250 [amdgpu] [ 1318.034181][ T1082] full_proxy_read+0x55/0x80 [ 1318.034487][ T1082] vfs_read+0xa7/0x360 [ 1318.034788][ T1082] ksys_read+0x70/0xf0 [ 1318.035085][ T1082] do_syscall_64+0x94/0x180 [ 1318.035375][ T1082] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 1318.035664][ T1082] [ 1318.035664][ T1082] other info that might help us debug this: [ 1318.035664][ T1082] [ 1318.036487][ T1082] Chain exists of: [ 1318.036487][ T1082] &mm->mmap_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex [ 1318.036487][ T1082] [ 1318.037310][ T1082] Possible unsafe locking scenario: [ 1318.037310][ T1082] [ 1318.037838][ T1082] CPU0 CPU1 [ 1318.038101][ T1082] ---- ---- [ 1318.038350][ T1082] lock(reservation_ww_class_mutex); [ 1318.038590][ T1082] lock(reservation_ww_class_acquire); [ 1318.038839][ T1082] lock(reservation_ww_class_mutex); [ 1318.039083][ T1082] rlock(&mm->mmap_lock); [ 1318.039328][ T1082] [ 1318.039328][ T1082] *** DEADLOCK *** [ 1318.039328][ T1082] [ 1318.040029][ T1082] 1 lock held by tar/1082: [ 1318.040259][ T1082] #0: ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu] [ 1318.040560][ T1082] [ 1318.040560][ T1082] stack backtrace: [ ---truncated--- |
| CVE-2024-35794 | In the Linux kernel, the following vulnerability has been resolved: dm-raid: really frozen sync_thread during suspend 1) commit f52f5c71f3d4 ("md: fix stopping sync thread") remove MD_RECOVERY_FROZEN from __md_stop_writes() and doesn't realize that dm-raid relies on __md_stop_writes() to frozen sync_thread indirectly. Fix this problem by adding MD_RECOVERY_FROZEN in md_stop_writes(), and since stop_sync_thread() is only used for dm-raid in this case, also move stop_sync_thread() to md_stop_writes(). 2) The flag MD_RECOVERY_FROZEN doesn't mean that sync thread is frozen, it only prevent new sync_thread to start, and it can't stop the running sync thread; In order to frozen sync_thread, after seting the flag, stop_sync_thread() should be used. 3) The flag MD_RECOVERY_FROZEN doesn't mean that writes are stopped, use it as condition for md_stop_writes() in raid_postsuspend() doesn't look correct. Consider that reentrant stop_sync_thread() do nothing, always call md_stop_writes() in raid_postsuspend(). 4) raid_message can set/clear the flag MD_RECOVERY_FROZEN at anytime, and if MD_RECOVERY_FROZEN is cleared while the array is suspended, new sync_thread can start unexpected. Fix this by disallow raid_message() to change sync_thread status during suspend. Note that after commit f52f5c71f3d4 ("md: fix stopping sync thread"), the test shell/lvconvert-raid-reshape.sh start to hang in stop_sync_thread(), and with previous fixes, the test won't hang there anymore, however, the test will still fail and complain that ext4 is corrupted. And with this patch, the test won't hang due to stop_sync_thread() or fail due to ext4 is corrupted anymore. However, there is still a deadlock related to dm-raid456 that will be fixed in following patches. |
| CVE-2024-35793 | In the Linux kernel, the following vulnerability has been resolved: debugfs: fix wait/cancellation handling during remove Ben Greear further reports deadlocks during concurrent debugfs remove while files are being accessed, even though the code in question now uses debugfs cancellations. Turns out that despite all the review on the locking, we missed completely that the logic is wrong: if the refcount hits zero we can finish (and need not wait for the completion), but if it doesn't we have to trigger all the cancellations. As written, we can _never_ get into the loop triggering the cancellations. Fix this, and explain it better while at it. |
| CVE-2024-35792 | In the Linux kernel, the following vulnerability has been resolved: crypto: rk3288 - Fix use after free in unprepare The unprepare call must be carried out before the finalize call as the latter can free the request. |
| CVE-2024-35791 | In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Flush pages under kvm->lock to fix UAF in svm_register_enc_region() Do the cache flush of converted pages in svm_register_enc_region() before dropping kvm->lock to fix use-after-free issues where region and/or its array of pages could be freed by a different task, e.g. if userspace has __unregister_enc_region_locked() already queued up for the region. Note, the "obvious" alternative of using local variables doesn't fully resolve the bug, as region->pages is also dynamically allocated. I.e. the region structure itself would be fine, but region->pages could be freed. Flushing multiple pages under kvm->lock is unfortunate, but the entire flow is a rare slow path, and the manual flush is only needed on CPUs that lack coherency for encrypted memory. |
| CVE-2024-35790 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group The DisplayPort driver's sysfs nodes may be present to the userspace before typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns NULL in those cases. Remove manual sysfs node creation in favor of adding attribute group as default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is not used here otherwise the path to the sysfs nodes is no longer compliant with the ABI. |
| CVE-2024-35789 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes When moving a station out of a VLAN and deleting the VLAN afterwards, the fast_rx entry still holds a pointer to the VLAN's netdev, which can cause use-after-free bugs. Fix this by immediately calling ieee80211_check_fast_rx after the VLAN change. |
| CVE-2024-35788 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix bounds check for dcn35 DcfClocks [Why] NumFclkLevelsEnabled is used for DcfClocks bounds check instead of designated NumDcfClkLevelsEnabled. That can cause array index out-of-bounds access. [How] Use designated variable for dcn35 DcfClocks bounds check. |
| CVE-2024-35787 | In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: fix incorrect usage for sb_index Commit d7038f951828 ("md-bitmap: don't use ->index for pages backing the bitmap file") removed page->index from bitmap code, but left wrong code logic for clustered-md. current code never set slot offset for cluster nodes, will sometimes cause crash in clustered env. Call trace (partly): md_bitmap_file_set_bit+0x110/0x1d8 [md_mod] md_bitmap_startwrite+0x13c/0x240 [md_mod] raid1_make_request+0x6b0/0x1c08 [raid1] md_handle_request+0x1dc/0x368 [md_mod] md_submit_bio+0x80/0xf8 [md_mod] __submit_bio+0x178/0x300 submit_bio_noacct_nocheck+0x11c/0x338 submit_bio_noacct+0x134/0x614 submit_bio+0x28/0xdc submit_bh_wbc+0x130/0x1cc submit_bh+0x1c/0x28 |
| CVE-2024-35786 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix stale locked mutex in nouveau_gem_ioctl_pushbuf If VM_BIND is enabled on the client the legacy submission ioctl can't be used, however if a client tries to do so regardless it will return an error. In this case the clients mutex remained unlocked leading to a deadlock inside nouveau_drm_postclose or any other nouveau ioctl call. |
| CVE-2024-35785 | In the Linux kernel, the following vulnerability has been resolved: tee: optee: Fix kernel panic caused by incorrect error handling The error path while failing to register devices on the TEE bus has a bug leading to kernel panic as follows: [ 15.398930] Unable to handle kernel paging request at virtual address ffff07ed00626d7c [ 15.406913] Mem abort info: [ 15.409722] ESR = 0x0000000096000005 [ 15.413490] EC = 0x25: DABT (current EL), IL = 32 bits [ 15.418814] SET = 0, FnV = 0 [ 15.421878] EA = 0, S1PTW = 0 [ 15.425031] FSC = 0x05: level 1 translation fault [ 15.429922] Data abort info: [ 15.432813] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 15.438310] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 15.443372] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 15.448697] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000d9e3e000 [ 15.455413] [ffff07ed00626d7c] pgd=1800000bffdf9003, p4d=1800000bffdf9003, pud=0000000000000000 [ 15.464146] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Commit 7269cba53d90 ("tee: optee: Fix supplicant based device enumeration") lead to the introduction of this bug. So fix it appropriately. |
| CVE-2024-35784 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock with fiemap and extent locking While working on the patchset to remove extent locking I got a lockdep splat with fiemap and pagefaulting with my new extent lock replacement lock. This deadlock exists with our normal code, we just don't have lockdep annotations with the extent locking so we've never noticed it. Since we're copying the fiemap extent to user space on every iteration we have the chance of pagefaulting. Because we hold the extent lock for the entire range we could mkwrite into a range in the file that we have mmap'ed. This would deadlock with the following stack trace [<0>] lock_extent+0x28d/0x2f0 [<0>] btrfs_page_mkwrite+0x273/0x8a0 [<0>] do_page_mkwrite+0x50/0xb0 [<0>] do_fault+0xc1/0x7b0 [<0>] __handle_mm_fault+0x2fa/0x460 [<0>] handle_mm_fault+0xa4/0x330 [<0>] do_user_addr_fault+0x1f4/0x800 [<0>] exc_page_fault+0x7c/0x1e0 [<0>] asm_exc_page_fault+0x26/0x30 [<0>] rep_movs_alternative+0x33/0x70 [<0>] _copy_to_user+0x49/0x70 [<0>] fiemap_fill_next_extent+0xc8/0x120 [<0>] emit_fiemap_extent+0x4d/0xa0 [<0>] extent_fiemap+0x7f8/0xad0 [<0>] btrfs_fiemap+0x49/0x80 [<0>] __x64_sys_ioctl+0x3e1/0xb50 [<0>] do_syscall_64+0x94/0x1a0 [<0>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 I wrote an fstest to reproduce this deadlock without my replacement lock and verified that the deadlock exists with our existing locking. To fix this simply don't take the extent lock for the entire duration of the fiemap. This is safe in general because we keep track of where we are when we're searching the tree, so if an ordered extent updates in the middle of our fiemap call we'll still emit the correct extents because we know what offset we were on before. The only place we maintain the lock is searching delalloc. Since the delalloc stuff can change during writeback we want to lock the extent range so we have a consistent view of delalloc at the time we're checking to see if we need to set the delalloc flag. With this patch applied we no longer deadlock with my testcase. |
| CVE-2024-35247 | In the Linux kernel, the following vulnerability has been resolved: fpga: region: add owner module and take its refcount The current implementation of the fpga region assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the region during programming if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_region struct and use it to take the module's refcount. Modify the functions for registering a region to take an additional owner module parameter and rename them to avoid conflicts. Use the old function names for helper macros that automatically set the module that registers the region as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a region without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga region. |
| CVE-2024-34777 | In the Linux kernel, the following vulnerability has been resolved: dma-mapping: benchmark: fix node id validation While validating node ids in map_benchmark_ioctl(), node_possible() may be provided with invalid argument outside of [0,MAX_NUMNODES-1] range leading to: BUG: KASAN: wild-memory-access in map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) Read of size 8 at addr 1fffffff8ccb6398 by task dma_map_benchma/971 CPU: 7 PID: 971 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) kasan_report (mm/kasan/report.c:603) kasan_check_range (mm/kasan/generic.c:189) variable_test_bit (arch/x86/include/asm/bitops.h:227) [inline] arch_test_bit (arch/x86/include/asm/bitops.h:239) [inline] _test_bit at (include/asm-generic/bitops/instrumented-non-atomic.h:142) [inline] node_state (include/linux/nodemask.h:423) [inline] map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Compare node ids with sane bounds first. NUMA_NO_NODE is considered a special valid case meaning that benchmarking kthreads won't be bound to a cpuset of a given node. Found by Linux Verification Center (linuxtesting.org). |
| CVE-2024-34030 | In the Linux kernel, the following vulnerability has been resolved: PCI: of_property: Return error for int_map allocation failure Return -ENOMEM from of_pci_prop_intr_map() if kcalloc() fails to prevent a NULL pointer dereference in this case. [bhelgaas: commit log] |
| CVE-2024-34027 | In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock It needs to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock to avoid racing with checkpoint, otherwise, filesystem metadata including blkaddr in dnode, inode fields and .total_valid_block_count may be corrupted after SPO case. |
| CVE-2024-33847 | In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: don't allow unaligned truncation on released compress inode f2fs image may be corrupted after below testcase: - mkfs.f2fs -O extra_attr,compression -f /dev/vdb - mount /dev/vdb /mnt/f2fs - touch /mnt/f2fs/file - f2fs_io setflags compression /mnt/f2fs/file - dd if=/dev/zero of=/mnt/f2fs/file bs=4k count=4 - f2fs_io release_cblocks /mnt/f2fs/file - truncate -s 8192 /mnt/f2fs/file - umount /mnt/f2fs - fsck.f2fs /dev/vdb [ASSERT] (fsck_chk_inode_blk:1256) --> ino: 0x5 has i_blocks: 0x00000002, but has 0x3 blocks [FSCK] valid_block_count matching with CP [Fail] [0x4, 0x5] [FSCK] other corrupted bugs [Fail] The reason is: partial truncation assume compressed inode has reserved blocks, after partial truncation, valid block count may change w/o .i_blocks and .total_valid_block_count update, result in corruption. This patch only allow cluster size aligned truncation on released compress inode for fixing. |
| CVE-2024-33621 | In the Linux kernel, the following vulnerability has been resolved: ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound Raw packet from PF_PACKET socket ontop of an IPv6-backed ipvlan device will hit WARN_ON_ONCE() in sk_mc_loop() through sch_direct_xmit() path. WARNING: CPU: 2 PID: 0 at net/core/sock.c:775 sk_mc_loop+0x2d/0x70 Modules linked in: sch_netem ipvlan rfkill cirrus drm_shmem_helper sg drm_kms_helper CPU: 2 PID: 0 Comm: swapper/2 Kdump: loaded Not tainted 6.9.0+ #279 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:sk_mc_loop+0x2d/0x70 Code: fa 0f 1f 44 00 00 65 0f b7 15 f7 96 a3 4f 31 c0 66 85 d2 75 26 48 85 ff 74 1c RSP: 0018:ffffa9584015cd78 EFLAGS: 00010212 RAX: 0000000000000011 RBX: ffff91e585793e00 RCX: 0000000002c6a001 RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffff91e589c0f000 RBP: ffff91e5855bd100 R08: 0000000000000000 R09: 3d00545216f43d00 R10: ffff91e584fdcc50 R11: 00000060dd8616f4 R12: ffff91e58132d000 R13: ffff91e584fdcc68 R14: ffff91e5869ce800 R15: ffff91e589c0f000 FS: 0000000000000000(0000) GS:ffff91e898100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f788f7c44c0 CR3: 0000000008e1a000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? __warn (kernel/panic.c:693) ? sk_mc_loop (net/core/sock.c:760) ? report_bug (lib/bug.c:201 lib/bug.c:219) ? handle_bug (arch/x86/kernel/traps.c:239) ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) ? sk_mc_loop (net/core/sock.c:760) ip6_finish_output2 (net/ipv6/ip6_output.c:83 (discriminator 1)) ? nf_hook_slow (net/netfilter/core.c:626) ip6_finish_output (net/ipv6/ip6_output.c:222) ? __pfx_ip6_finish_output (net/ipv6/ip6_output.c:215) ipvlan_xmit_mode_l3 (drivers/net/ipvlan/ipvlan_core.c:602) ipvlan ipvlan_start_xmit (drivers/net/ipvlan/ipvlan_main.c:226) ipvlan dev_hard_start_xmit (net/core/dev.c:3594) sch_direct_xmit (net/sched/sch_generic.c:343) __qdisc_run (net/sched/sch_generic.c:416) net_tx_action (net/core/dev.c:5286) handle_softirqs (kernel/softirq.c:555) __irq_exit_rcu (kernel/softirq.c:589) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1043) The warning triggers as this: packet_sendmsg packet_snd //skb->sk is packet sk __dev_queue_xmit __dev_xmit_skb //q->enqueue is not NULL __qdisc_run sch_direct_xmit dev_hard_start_xmit ipvlan_start_xmit ipvlan_xmit_mode_l3 //l3 mode ipvlan_process_outbound //vepa flag ipvlan_process_v6_outbound ip6_local_out __ip6_finish_output ip6_finish_output2 //multicast packet sk_mc_loop //sk->sk_family is AF_PACKET Call ip{6}_local_out() with NULL sk in ipvlan as other tunnels to fix this. |
| CVE-2024-33619 | In the Linux kernel, the following vulnerability has been resolved: efi: libstub: only free priv.runtime_map when allocated priv.runtime_map is only allocated when efi_novamap is not set. Otherwise, it is an uninitialized value. In the error path, it is freed unconditionally. Avoid passing an uninitialized value to free_pool. Free priv.runtime_map only when it was allocated. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. |
| CVE-2024-32936 | In the Linux kernel, the following vulnerability has been resolved: media: ti: j721e-csi2rx: Fix races while restarting DMA After the frame is submitted to DMA, it may happen that the submitted list is not updated soon enough, and the DMA callback is triggered before that. This can lead to kernel crashes, so move everything in a single lock/unlock section to prevent such races. |
| CVE-2024-31076 | In the Linux kernel, the following vulnerability has been resolved: genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline The absence of IRQD_MOVE_PCNTXT prevents immediate effectiveness of interrupt affinity reconfiguration via procfs. Instead, the change is deferred until the next instance of the interrupt being triggered on the original CPU. When the interrupt next triggers on the original CPU, the new affinity is enforced within __irq_move_irq(). A vector is allocated from the new CPU, but the old vector on the original CPU remains and is not immediately reclaimed. Instead, apicd->move_in_progress is flagged, and the reclaiming process is delayed until the next trigger of the interrupt on the new CPU. Upon the subsequent triggering of the interrupt on the new CPU, irq_complete_move() adds a task to the old CPU's vector_cleanup list if it remains online. Subsequently, the timer on the old CPU iterates over its vector_cleanup list, reclaiming old vectors. However, a rare scenario arises if the old CPU is outgoing before the interrupt triggers again on the new CPU. In that case irq_force_complete_move() is not invoked on the outgoing CPU to reclaim the old apicd->prev_vector because the interrupt isn't currently affine to the outgoing CPU, and irq_needs_fixup() returns false. Even though __vector_schedule_cleanup() is later called on the new CPU, it doesn't reclaim apicd->prev_vector; instead, it simply resets both apicd->move_in_progress and apicd->prev_vector to 0. As a result, the vector remains unreclaimed in vector_matrix, leading to a CPU vector leak. To address this issue, move the invocation of irq_force_complete_move() before the irq_needs_fixup() call to reclaim apicd->prev_vector, if the interrupt is currently or used to be affine to the outgoing CPU. Additionally, reclaim the vector in __vector_schedule_cleanup() as well, following a warning message, although theoretically it should never see apicd->move_in_progress with apicd->prev_cpu pointing to an offline CPU. |
| CVE-2024-29018 | Moby is an open source container framework that is a key component of Docker Engine, Docker Desktop, and other distributions of container tooling or runtimes. Moby's networking implementation allows for many networks, each with their own IP address range and gateway, to be defined. This feature is frequently referred to as custom networks, as each network can have a different driver, set of parameters and thus behaviors. When creating a network, the `--internal` flag is used to designate a network as _internal_. The `internal` attribute in a docker-compose.yml file may also be used to mark a network _internal_, and other API clients may specify the `internal` parameter as well. When containers with networking are created, they are assigned unique network interfaces and IP addresses. The host serves as a router for non-internal networks, with a gateway IP that provides SNAT/DNAT to/from container IPs. Containers on an internal network may communicate between each other, but are precluded from communicating with any networks the host has access to (LAN or WAN) as no default route is configured, and firewall rules are set up to drop all outgoing traffic. Communication with the gateway IP address (and thus appropriately configured host services) is possible, and the host may communicate with any container IP directly. In addition to configuring the Linux kernel's various networking features to enable container networking, `dockerd` directly provides some services to container networks. Principal among these is serving as a resolver, enabling service discovery, and resolution of names from an upstream resolver. When a DNS request for a name that does not correspond to a container is received, the request is forwarded to the configured upstream resolver. This request is made from the container's network namespace: the level of access and routing of traffic is the same as if the request was made by the container itself. As a consequence of this design, containers solely attached to an internal network will be unable to resolve names using the upstream resolver, as the container itself is unable to communicate with that nameserver. Only the names of containers also attached to the internal network are able to be resolved. Many systems run a local forwarding DNS resolver. As the host and any containers have separate loopback devices, a consequence of the design described above is that containers are unable to resolve names from the host's configured resolver, as they cannot reach these addresses on the host loopback device. To bridge this gap, and to allow containers to properly resolve names even when a local forwarding resolver is used on a loopback address, `dockerd` detects this scenario and instead forward DNS requests from the host namework namespace. The loopback resolver then forwards the requests to its configured upstream resolvers, as expected. Because `dockerd` forwards DNS requests to the host loopback device, bypassing the container network namespace's normal routing semantics entirely, internal networks can unexpectedly forward DNS requests to an external nameserver. By registering a domain for which they control the authoritative nameservers, an attacker could arrange for a compromised container to exfiltrate data by encoding it in DNS queries that will eventually be answered by their nameservers. Docker Desktop is not affected, as Docker Desktop always runs an internal resolver on a RFC 1918 address. Moby releases 26.0.0, 25.0.4, and 23.0.11 are patched to prevent forwarding any DNS requests from internal networks. As a workaround, run containers intended to be solely attached to internal networks with a custom upstream address, which will force all upstream DNS queries to be resolved from the container's network namespace. |
| CVE-2024-27437 | In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Disable auto-enable of exclusive INTx IRQ Currently for devices requiring masking at the irqchip for INTx, ie. devices without DisINTx support, the IRQ is enabled in request_irq() and subsequently disabled as necessary to align with the masked status flag. This presents a window where the interrupt could fire between these events, resulting in the IRQ incrementing the disable depth twice. This would be unrecoverable for a user since the masked flag prevents nested enables through vfio. Instead, invert the logic using IRQF_NO_AUTOEN such that exclusive INTx is never auto-enabled, then unmask as required. |
| CVE-2024-27436 | In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Stop parsing channels bits when all channels are found. If a usb audio device sets more bits than the amount of channels it could write outside of the map array. |
| CVE-2024-27435 | In the Linux kernel, the following vulnerability has been resolved: nvme: fix reconnection fail due to reserved tag allocation We found a issue on production environment while using NVMe over RDMA, admin_q reconnect failed forever while remote target and network is ok. After dig into it, we found it may caused by a ABBA deadlock due to tag allocation. In my case, the tag was hold by a keep alive request waiting inside admin_q, as we quiesced admin_q while reset ctrl, so the request maked as idle and will not process before reset success. As fabric_q shares tagset with admin_q, while reconnect remote target, we need a tag for connect command, but the only one reserved tag was held by keep alive command which waiting inside admin_q. As a result, we failed to reconnect admin_q forever. In order to fix this issue, I think we should keep two reserved tags for admin queue. |
| CVE-2024-27434 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't set the MFP flag for the GTK The firmware doesn't need the MFP flag for the GTK, it can even make the firmware crash. in case the AP is configured with: group cipher TKIP and MFPC. We would send the GTK with cipher = TKIP and MFP which is of course not possible. |
| CVE-2024-27433 | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe() 'clk_data' is allocated with mtk_devm_alloc_clk_data(). So calling mtk_free_clk_data() explicitly in the remove function would lead to a double-free. Remove the redundant call. |
| CVE-2024-27432 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: fix PPE hanging issue A patch to resolve an issue was found in MediaTek's GPL-licensed SDK: In the mtk_ppe_stop() function, the PPE scan mode is not disabled before disabling the PPE. This can potentially lead to a hang during the process of disabling the PPE. Without this patch, the PPE may experience a hang during the reboot test. |
| CVE-2024-27431 | In the Linux kernel, the following vulnerability has been resolved: cpumap: Zero-initialise xdp_rxq_info struct before running XDP program When running an XDP program that is attached to a cpumap entry, we don't initialise the xdp_rxq_info data structure being used in the xdp_buff that backs the XDP program invocation. Tobias noticed that this leads to random values being returned as the xdp_md->rx_queue_index value for XDP programs running in a cpumap. This means we're basically returning the contents of the uninitialised memory, which is bad. Fix this by zero-initialising the rxq data structure before running the XDP program. |
| CVE-2024-27419 | In the Linux kernel, the following vulnerability has been resolved: netrom: Fix data-races around sysctl_net_busy_read We need to protect the reader reading the sysctl value because the value can be changed concurrently. |
| CVE-2024-27418 | In the Linux kernel, the following vulnerability has been resolved: net: mctp: take ownership of skb in mctp_local_output Currently, mctp_local_output only takes ownership of skb on success, and we may leak an skb if mctp_local_output fails in specific states; the skb ownership isn't transferred until the actual output routing occurs. Instead, make mctp_local_output free the skb on all error paths up to the route action, so it always consumes the passed skb. |
| CVE-2024-27417 | In the Linux kernel, the following vulnerability has been resolved: ipv6: fix potential "struct net" leak in inet6_rtm_getaddr() It seems that if userspace provides a correct IFA_TARGET_NETNSID value but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr() returns -EINVAL with an elevated "struct net" refcount. |
| CVE-2024-27416 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST If we received HCI_EV_IO_CAPA_REQUEST while HCI_OP_READ_REMOTE_EXT_FEATURES is yet to be responded assume the remote does support SSP since otherwise this event shouldn't be generated. |
| CVE-2024-27415 | In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: confirm multicast packets before passing them up the stack conntrack nf_confirm logic cannot handle cloned skbs referencing the same nf_conn entry, which will happen for multicast (broadcast) frames on bridges. Example: macvlan0 | br0 / \ ethX ethY ethX (or Y) receives a L2 multicast or broadcast packet containing an IP packet, flow is not yet in conntrack table. 1. skb passes through bridge and fake-ip (br_netfilter)Prerouting. -> skb->_nfct now references a unconfirmed entry 2. skb is broad/mcast packet. bridge now passes clones out on each bridge interface. 3. skb gets passed up the stack. 4. In macvlan case, macvlan driver retains clone(s) of the mcast skb and schedules a work queue to send them out on the lower devices. The clone skb->_nfct is not a copy, it is the same entry as the original skb. The macvlan rx handler then returns RX_HANDLER_PASS. 5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb. The Macvlan broadcast worker and normal confirm path will race. This race will not happen if step 2 already confirmed a clone. In that case later steps perform skb_clone() with skb->_nfct already confirmed (in hash table). This works fine. But such confirmation won't happen when eb/ip/nftables rules dropped the packets before they reached the nf_confirm step in postrouting. Pablo points out that nf_conntrack_bridge doesn't allow use of stateful nat, so we can safely discard the nf_conn entry and let inet call conntrack again. This doesn't work for bridge netfilter: skb could have a nat transformation. Also bridge nf prevents re-invocation of inet prerouting via 'sabotage_in' hook. Work around this problem by explicit confirmation of the entry at LOCAL_IN time, before upper layer has a chance to clone the unconfirmed entry. The downside is that this disables NAT and conntrack helpers. Alternative fix would be to add locking to all code parts that deal with unconfirmed packets, but even if that could be done in a sane way this opens up other problems, for example: -m physdev --physdev-out eth0 -j SNAT --snat-to 1.2.3.4 -m physdev --physdev-out eth1 -j SNAT --snat-to 1.2.3.5 For multicast case, only one of such conflicting mappings will be created, conntrack only handles 1:1 NAT mappings. Users should set create a setup that explicitly marks such traffic NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass them, ruleset might have accept rules for untracked traffic already, so user-visible behaviour would change. |
| CVE-2024-27414 | In the Linux kernel, the following vulnerability has been resolved: rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back In the commit d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic in the function `rtnl_bridge_setlink` to enable the loop to also check the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment removed the `break` statement and led to an error logic of the flags writing back at the end of this function. if (have_flags) memcpy(nla_data(attr), &flags, sizeof(flags)); // attr should point to IFLA_BRIDGE_FLAGS NLA !!! Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS. However, this is not necessarily true fow now as the updated loop will let the attr point to the last NLA, even an invalid NLA which could cause overflow writes. This patch introduces a new variable `br_flag` to save the NLA pointer that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned error logic. |
| CVE-2024-27413 | In the Linux kernel, the following vulnerability has been resolved: efi/capsule-loader: fix incorrect allocation size gcc-14 notices that the allocation with sizeof(void) on 32-bit architectures is not enough for a 64-bit phys_addr_t: drivers/firmware/efi/capsule-loader.c: In function 'efi_capsule_open': drivers/firmware/efi/capsule-loader.c:295:24: error: allocation of insufficient size '4' for type 'phys_addr_t' {aka 'long long unsigned int'} with size '8' [-Werror=alloc-size] 295 | cap_info->phys = kzalloc(sizeof(void *), GFP_KERNEL); | ^ Use the correct type instead here. |
| CVE-2024-27412 | In the Linux kernel, the following vulnerability has been resolved: power: supply: bq27xxx-i2c: Do not free non existing IRQ The bq27xxx i2c-client may not have an IRQ, in which case client->irq will be 0. bq27xxx_battery_i2c_probe() already has an if (client->irq) check wrapping the request_threaded_irq(). But bq27xxx_battery_i2c_remove() unconditionally calls free_irq(client->irq) leading to: [ 190.310742] ------------[ cut here ]------------ [ 190.310843] Trying to free already-free IRQ 0 [ 190.310861] WARNING: CPU: 2 PID: 1304 at kernel/irq/manage.c:1893 free_irq+0x1b8/0x310 Followed by a backtrace when unbinding the driver. Add an if (client->irq) to bq27xxx_battery_i2c_remove() mirroring probe() to fix this. |
| CVE-2024-27411 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: keep DMA buffers required for suspend/resume Nouveau deallocates a few buffers post GPU init which are required for GPU suspend/resume to function correctly. This is likely not as big an issue on systems where the NVGPU is the only GPU, but on multi-GPU set ups it leads to a regression where the kernel module errors and results in a system-wide rendering freeze. This commit addresses that regression by moving the two buffers required for suspend and resume to be deallocated at driver unload instead of post init. |
| CVE-2024-27410 | In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject iftype change with mesh ID change It's currently possible to change the mesh ID when the interface isn't yet in mesh mode, at the same time as changing it into mesh mode. This leads to an overwrite of data in the wdev->u union for the interface type it currently has, causing cfg80211_change_iface() to do wrong things when switching. We could probably allow setting an interface to mesh while setting the mesh ID at the same time by doing a different order of operations here, but realistically there's no userspace that's going to do this, so just disallow changes in iftype when setting mesh ID. |
| CVE-2024-27409 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup The Linked list element and pointer are not stored in the same memory as the HDMA controller register. If the doorbell register is toggled before the full write of the linked list a race condition error will occur. In remote setup we can only use a readl to the memory to assure the full write has occurred. |
| CVE-2024-27408 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup The Linked list element and pointer are not stored in the same memory as the eDMA controller register. If the doorbell register is toggled before the full write of the linked list a race condition error will occur. In remote setup we can only use a readl to the memory to assure the full write has occurred. |
| CVE-2024-27407 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fixed overflow check in mi_enum_attr() |
| CVE-2024-27406 | In the Linux kernel, the following vulnerability has been resolved: lib/Kconfig.debug: TEST_IOV_ITER depends on MMU Trying to run the iov_iter unit test on a nommu system such as the qemu kc705-nommu emulation results in a crash. KTAP version 1 # Subtest: iov_iter # module: kunit_iov_iter 1..9 BUG: failure at mm/nommu.c:318/vmap()! Kernel panic - not syncing: BUG! The test calls vmap() directly, but vmap() is not supported on nommu systems, causing the crash. TEST_IOV_ITER therefore needs to depend on MMU. |
| CVE-2024-27405 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs It is observed sometimes when tethering is used over NCM with Windows 11 as host, at some instances, the gadget_giveback has one byte appended at the end of a proper NTB. When the NTB is parsed, unwrap call looks for any leftover bytes in SKB provided by u_ether and if there are any pending bytes, it treats them as a separate NTB and parses it. But in case the second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that were parsed properly in the first NTB and saved in rx_list are dropped. Adding a few custom traces showed the following: [002] d..1 7828.532866: dwc3_gadget_giveback: ep1out: req 000000003868811a length 1025/16384 zsI ==> 0 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10 [002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames In this case, the giveback is of 1025 bytes and block length is 1024. The rest 1 byte (which is 0x00) won't be parsed resulting in drop of all datagrams in rx_list. Same is case with packets of size 2048: [002] d..1 7828.557948: dwc3_gadget_giveback: ep1out: req 0000000011dfd96e length 2049/16384 zsI ==> 0 [002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800 Lecroy shows one byte coming in extra confirming that the byte is coming in from PC: Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590) - Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590) --- Packet 4063861 Data(1024 bytes) Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590) --- Packet 4063863 Data(1 byte) Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722) According to Windows driver, no ZLP is needed if wBlockLength is non-zero, because the non-zero wBlockLength has already told the function side the size of transfer to be expected. However, there are in-market NCM devices that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize. To deal with such devices, it pads an extra 0 at end so the transfer is no longer multiple of wMaxPacketSize. |
| CVE-2024-27404 | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix data races on remote_id Similar to the previous patch, address the data race on remote_id, adding the suitable ONCE annotations. |
| CVE-2024-27403 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_flow_offload: reset dst in route object after setting up flow dst is transferred to the flow object, route object does not own it anymore. Reset dst in route object, otherwise if flow_offload_add() fails, error path releases dst twice, leading to a refcount underflow. |
| CVE-2024-27402 | In the Linux kernel, the following vulnerability has been resolved: phonet/pep: fix racy skb_queue_empty() use The receive queues are protected by their respective spin-lock, not the socket lock. This could lead to skb_peek() unexpectedly returning NULL or a pointer to an already dequeued socket buffer. |
| CVE-2024-27401 | In the Linux kernel, the following vulnerability has been resolved: firewire: nosy: ensure user_length is taken into account when fetching packet contents Ensure that packet_buffer_get respects the user_length provided. If the length of the head packet exceeds the user_length, packet_buffer_get will now return 0 to signify to the user that no data were read and a larger buffer size is required. Helps prevent user space overflows. |
| CVE-2024-27400 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2 This reverts drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap. The basic problem here is that after the move the old location is simply not available any more. Some fixes were suggested, but essentially we should call the move notification before actually moving things because only this way we have the correct order for DMA-buf and VM move notifications as well. Also rework the statistic handling so that we don't update the eviction counter before the move. v2: add missing NULL check |
| CVE-2024-27399 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout There is a race condition between l2cap_chan_timeout() and l2cap_chan_del(). When we use l2cap_chan_del() to delete the channel, the chan->conn will be set to null. But the conn could be dereferenced again in the mutex_lock() of l2cap_chan_timeout(). As a result the null pointer dereference bug will happen. The KASAN report triggered by POC is shown below: [ 472.074580] ================================================================== [ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0 [ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7 [ 472.075308] [ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.075308] Workqueue: events l2cap_chan_timeout [ 472.075308] Call Trace: [ 472.075308] <TASK> [ 472.075308] dump_stack_lvl+0x137/0x1a0 [ 472.075308] print_report+0x101/0x250 [ 472.075308] ? __virt_addr_valid+0x77/0x160 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_report+0x139/0x170 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_check_range+0x2c3/0x2e0 [ 472.075308] mutex_lock+0x68/0xc0 [ 472.075308] l2cap_chan_timeout+0x181/0x300 [ 472.075308] process_one_work+0x5d2/0xe00 [ 472.075308] worker_thread+0xe1d/0x1660 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] kthread+0x2b7/0x350 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork+0x4d/0x80 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork_asm+0x11/0x20 [ 472.075308] </TASK> [ 472.075308] ================================================================== [ 472.094860] Disabling lock debugging due to kernel taint [ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 472.096136] #PF: supervisor write access in kernel mode [ 472.096136] #PF: error_code(0x0002) - not-present page [ 472.096136] PGD 0 P4D 0 [ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI [ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.096136] Workqueue: events l2cap_chan_timeout [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.096136] Call Trace: [ 472.096136] <TASK> [ 472.096136] ? __die_body+0x8d/0xe0 [ 472.096136] ? page_fault_oops+0x6b8/0x9a0 [ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0 [ 472.096136] ? do_user_addr_fault+0x1027/0x1340 [ 472.096136] ? _printk+0x7a/0xa0 [ 472.096136] ? mutex_lock+0x68/0xc0 [ 472.096136] ? add_taint+0x42/0xd0 [ 472.096136] ? exc_page_fault+0x6a/0x1b0 [ 472.096136] ? asm_exc_page_fault+0x26/0x30 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] ? mutex_lock+0x88/0xc0 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] l2cap_chan_timeo ---truncated--- |
| CVE-2024-27398 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout When the sco connection is established and then, the sco socket is releasing, timeout_work will be scheduled to judge whether the sco disconnection is timeout. The sock will be deallocated later, but it is dereferenced again in sco_sock_timeout. As a result, the use-after-free bugs will happen. The root cause is shown below: Cleanup Thread | Worker Thread sco_sock_release | sco_sock_close | __sco_sock_close | sco_sock_set_timer | schedule_delayed_work | sco_sock_kill | (wait a time) sock_put(sk) //FREE | sco_sock_timeout | sock_hold(sk) //USE The KASAN report triggered by POC is shown below: [ 95.890016] ================================================================== [ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0 [ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7 ... [ 95.890755] Workqueue: events sco_sock_timeout [ 95.890755] Call Trace: [ 95.890755] <TASK> [ 95.890755] dump_stack_lvl+0x45/0x110 [ 95.890755] print_address_description+0x78/0x390 [ 95.890755] print_report+0x11b/0x250 [ 95.890755] ? __virt_addr_valid+0xbe/0xf0 [ 95.890755] ? sco_sock_timeout+0x5e/0x1c0 [ 95.890755] kasan_report+0x139/0x170 [ 95.890755] ? update_load_avg+0xe5/0x9f0 [ 95.890755] ? sco_sock_timeout+0x5e/0x1c0 [ 95.890755] kasan_check_range+0x2c3/0x2e0 [ 95.890755] sco_sock_timeout+0x5e/0x1c0 [ 95.890755] process_one_work+0x561/0xc50 [ 95.890755] worker_thread+0xab2/0x13c0 [ 95.890755] ? pr_cont_work+0x490/0x490 [ 95.890755] kthread+0x279/0x300 [ 95.890755] ? pr_cont_work+0x490/0x490 [ 95.890755] ? kthread_blkcg+0xa0/0xa0 [ 95.890755] ret_from_fork+0x34/0x60 [ 95.890755] ? kthread_blkcg+0xa0/0xa0 [ 95.890755] ret_from_fork_asm+0x11/0x20 [ 95.890755] </TASK> [ 95.890755] [ 95.890755] Allocated by task 506: [ 95.890755] kasan_save_track+0x3f/0x70 [ 95.890755] __kasan_kmalloc+0x86/0x90 [ 95.890755] __kmalloc+0x17f/0x360 [ 95.890755] sk_prot_alloc+0xe1/0x1a0 [ 95.890755] sk_alloc+0x31/0x4e0 [ 95.890755] bt_sock_alloc+0x2b/0x2a0 [ 95.890755] sco_sock_create+0xad/0x320 [ 95.890755] bt_sock_create+0x145/0x320 [ 95.890755] __sock_create+0x2e1/0x650 [ 95.890755] __sys_socket+0xd0/0x280 [ 95.890755] __x64_sys_socket+0x75/0x80 [ 95.890755] do_syscall_64+0xc4/0x1b0 [ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 95.890755] [ 95.890755] Freed by task 506: [ 95.890755] kasan_save_track+0x3f/0x70 [ 95.890755] kasan_save_free_info+0x40/0x50 [ 95.890755] poison_slab_object+0x118/0x180 [ 95.890755] __kasan_slab_free+0x12/0x30 [ 95.890755] kfree+0xb2/0x240 [ 95.890755] __sk_destruct+0x317/0x410 [ 95.890755] sco_sock_release+0x232/0x280 [ 95.890755] sock_close+0xb2/0x210 [ 95.890755] __fput+0x37f/0x770 [ 95.890755] task_work_run+0x1ae/0x210 [ 95.890755] get_signal+0xe17/0xf70 [ 95.890755] arch_do_signal_or_restart+0x3f/0x520 [ 95.890755] syscall_exit_to_user_mode+0x55/0x120 [ 95.890755] do_syscall_64+0xd1/0x1b0 [ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 95.890755] [ 95.890755] The buggy address belongs to the object at ffff88800c388000 [ 95.890755] which belongs to the cache kmalloc-1k of size 1024 [ 95.890755] The buggy address is located 128 bytes inside of [ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400) [ 95.890755] [ 95.890755] The buggy address belongs to the physical page: [ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388 [ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 95.890755] ano ---truncated--- |
| CVE-2024-27397 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: use timestamp to check for set element timeout Add a timestamp field at the beginning of the transaction, store it in the nftables per-netns area. Update set backend .insert, .deactivate and sync gc path to use the timestamp, this avoids that an element expires while control plane transaction is still unfinished. .lookup and .update, which are used from packet path, still use the current time to check if the element has expired. And .get path and dump also since this runs lockless under rcu read size lock. Then, there is async gc which also needs to check the current time since it runs asynchronously from a workqueue. |
| CVE-2024-27396 | In the Linux kernel, the following vulnerability has been resolved: net: gtp: Fix Use-After-Free in gtp_dellink Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of gtp_dellink, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. |
| CVE-2024-27395 | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Fix Use-After-Free in ovs_ct_exit Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal of ovs_ct_limit_exit, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. |
| CVE-2024-27394 | In the Linux kernel, the following vulnerability has been resolved: tcp: Fix Use-After-Free in tcp_ao_connect_init Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of tcp_ao_connect_init, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. |
| CVE-2024-27393 | In the Linux kernel, the following vulnerability has been resolved: xen-netfront: Add missing skb_mark_for_recycle Notice that skb_mark_for_recycle() is introduced later than fixes tag in commit 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling"). It is believed that fixes tag were missing a call to page_pool_release_page() between v5.9 to v5.14, after which is should have used skb_mark_for_recycle(). Since v6.6 the call page_pool_release_page() were removed (in commit 535b9c61bdef ("net: page_pool: hide page_pool_release_page()") and remaining callers converted (in commit 6bfef2ec0172 ("Merge branch 'net-page_pool-remove-page_pool_release_page'")). This leak became visible in v6.8 via commit dba1b8a7ab68 ("mm/page_pool: catch page_pool memory leaks"). |
| CVE-2024-27392 | In the Linux kernel, the following vulnerability has been resolved: nvme: host: fix double-free of struct nvme_id_ns in ns_update_nuse() When nvme_identify_ns() fails, it frees the pointer to the struct nvme_id_ns before it returns. However, ns_update_nuse() calls kfree() for the pointer even when nvme_identify_ns() fails. This results in KASAN double-free, which was observed with blktests nvme/045 with proposed patches [1] on the kernel v6.8-rc7. Fix the double-free by skipping kfree() when nvme_identify_ns() fails. |
| CVE-2024-27391 | In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: do not realloc workqueue everytime an interface is added Commit 09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"") moved workqueue creation in wilc_netdev_ifc_init in order to set the interface name in the workqueue name. However, while the driver needs only one workqueue, the wilc_netdev_ifc_init is called each time we add an interface over a phy, which in turns overwrite the workqueue with a new one. This can be observed with the following commands: for i in $(seq 0 10) do iw phy phy0 interface add wlan1 type managed iw dev wlan1 del done ps -eo pid,comm|grep wlan 39 kworker/R-wlan0 98 kworker/R-wlan1 102 kworker/R-wlan1 105 kworker/R-wlan1 108 kworker/R-wlan1 111 kworker/R-wlan1 114 kworker/R-wlan1 117 kworker/R-wlan1 120 kworker/R-wlan1 123 kworker/R-wlan1 126 kworker/R-wlan1 129 kworker/R-wlan1 Fix this leakage by putting back hif_workqueue allocation in wilc_cfg80211_init. Regarding the workqueue name, it is indeed relevant to set it lowercase, however it is not attached to a specific netdev, so enforcing netdev name in the name is not so relevant. Still, enrich the name with the wiphy name to make it clear which phy is using the workqueue. |
| CVE-2024-27390 | In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: remove one synchronize_net() barrier in ipv6_mc_down() As discussed in the past (commit 2d3916f31891 ("ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report()")) I think the synchronize_net() call in ipv6_mc_down() is not needed. Under load, synchronize_net() can last between 200 usec and 5 ms. KASAN seems to agree as well. |
| CVE-2024-27389 | In the Linux kernel, the following vulnerability has been resolved: pstore: inode: Only d_invalidate() is needed Unloading a modular pstore backend with records in pstorefs would trigger the dput() double-drop warning: WARNING: CPU: 0 PID: 2569 at fs/dcache.c:762 dput.part.0+0x3f3/0x410 Using the combo of d_drop()/dput() (as mentioned in Documentation/filesystems/vfs.rst) isn't the right approach here, and leads to the reference counting problem seen above. Use d_invalidate() and update the code to not bother checking for error codes that can never happen. --- |
| CVE-2024-27388 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix some memleaks in gssx_dec_option_array The creds and oa->data need to be freed in the error-handling paths after their allocation. So this patch add these deallocations in the corresponding paths. |
| CVE-2024-27080 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race when detecting delalloc ranges during fiemap For fiemap we recently stopped locking the target extent range for the whole duration of the fiemap call, in order to avoid a deadlock in a scenario where the fiemap buffer happens to be a memory mapped range of the same file. This use case is very unlikely to be useful in practice but it may be triggered by fuzz testing (syzbot, etc). This however introduced a race that makes us miss delalloc ranges for file regions that are currently holes, so the caller of fiemap will not be aware that there's data for some file regions. This can be quite serious for some use cases - for example in coreutils versions before 9.0, the cp program used fiemap to detect holes and data in the source file, copying only regions with data (extents or delalloc) from the source file to the destination file in order to preserve holes (see the documentation for its --sparse command line option). This means that if cp was used with a source file that had delalloc in a hole, the destination file could end up without that data, which is effectively a data loss issue, if it happened to hit the race described below. The race happens like this: 1) Fiemap is called, without the FIEMAP_FLAG_SYNC flag, for a file that has delalloc in the file range [64M, 65M[, which is currently a hole; 2) Fiemap locks the inode in shared mode, then starts iterating the inode's subvolume tree searching for file extent items, without having the whole fiemap target range locked in the inode's io tree - the change introduced recently by commit b0ad381fa769 ("btrfs: fix deadlock with fiemap and extent locking"). It only locks ranges in the io tree when it finds a hole or prealloc extent since that commit; 3) Note that fiemap clones each leaf before using it, and this is to avoid deadlocks when locking a file range in the inode's io tree and the fiemap buffer is memory mapped to some file, because writing to the page with btrfs_page_mkwrite() will wait on any ordered extent for the page's range and the ordered extent needs to lock the range and may need to modify the same leaf, therefore leading to a deadlock on the leaf; 4) While iterating the file extent items in the cloned leaf before finding the hole in the range [64M, 65M[, the delalloc in that range is flushed and its ordered extent completes - meaning the corresponding file extent item is in the inode's subvolume tree, but not present in the cloned leaf that fiemap is iterating over; 5) When fiemap finds the hole in the [64M, 65M[ range by seeing the gap in the cloned leaf (or a file extent item with disk_bytenr == 0 in case the NO_HOLES feature is not enabled), it will lock that file range in the inode's io tree and then search for delalloc by checking for the EXTENT_DELALLOC bit in the io tree for that range and ordered extents (with btrfs_find_delalloc_in_range()). But it finds nothing since the delalloc in that range was already flushed and the ordered extent completed and is gone - as a result fiemap will not report that there's delalloc or an extent for the range [64M, 65M[, so user space will be mislead into thinking that there's a hole in that range. This could actually be sporadically triggered with test case generic/094 from fstests, which reports a missing extent/delalloc range like this: generic/094 2s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad) --- tests/generic/094.out 2020-06-10 19:29:03.830519425 +0100 +++ /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad 2024-02-28 11:00:00.381071525 +0000 @@ -1,3 +1,9 @@ QA output created by 094 fiemap run with sync fiemap run without sync +ERROR: couldn't find extent at 7 +map is 'HHDDHPPDPHPH' +logical: [ 5.. 6] phys: ---truncated--- |
| CVE-2024-27079 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix NULL domain on device release In the kdump kernel, the IOMMU operates in deferred_attach mode. In this mode, info->domain may not yet be assigned by the time the release_device function is called. It leads to the following crash in the crash kernel: BUG: kernel NULL pointer dereference, address: 000000000000003c ... RIP: 0010:do_raw_spin_lock+0xa/0xa0 ... _raw_spin_lock_irqsave+0x1b/0x30 intel_iommu_release_device+0x96/0x170 iommu_deinit_device+0x39/0xf0 __iommu_group_remove_device+0xa0/0xd0 iommu_bus_notifier+0x55/0xb0 notifier_call_chain+0x5a/0xd0 blocking_notifier_call_chain+0x41/0x60 bus_notify+0x34/0x50 device_del+0x269/0x3d0 pci_remove_bus_device+0x77/0x100 p2sb_bar+0xae/0x1d0 ... i801_probe+0x423/0x740 Use the release_domain mechanism to fix it. The scalable mode context entry which is not part of release domain should be cleared in release_device(). |
| CVE-2024-27078 | In the Linux kernel, the following vulnerability has been resolved: media: v4l2-tpg: fix some memleaks in tpg_alloc In tpg_alloc, resources should be deallocated in each and every error-handling paths, since they are allocated in for statements. Otherwise there would be memleaks because tpg_free is called only when tpg_alloc return 0. |
| CVE-2024-27077 | In the Linux kernel, the following vulnerability has been resolved: media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity The entity->name (i.e. name) is allocated in v4l2_m2m_register_entity but isn't freed in its following error-handling paths. This patch adds such deallocation to prevent memleak of entity->name. |
| CVE-2024-27076 | In the Linux kernel, the following vulnerability has been resolved: media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak Free the memory allocated in v4l2_ctrl_handler_init on release. |
| CVE-2024-27075 | In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: avoid stack overflow warnings with clang A previous patch worked around a KASAN issue in stv0367, now a similar problem showed up with clang: drivers/media/dvb-frontends/stv0367.c:1222:12: error: stack frame size (3624) exceeds limit (2048) in 'stv0367ter_set_frontend' [-Werror,-Wframe-larger-than] 1214 | static int stv0367ter_set_frontend(struct dvb_frontend *fe) Rework the stv0367_writereg() function to be simpler and mark both register access functions as noinline_for_stack so the temporary i2c_msg structures do not get duplicated on the stack when KASAN_STACK is enabled. |
| CVE-2024-27074 | In the Linux kernel, the following vulnerability has been resolved: media: go7007: fix a memleak in go7007_load_encoder In go7007_load_encoder, bounce(i.e. go->boot_fw), is allocated without a deallocation thereafter. After the following call chain: saa7134_go7007_init |-> go7007_boot_encoder |-> go7007_load_encoder |-> kfree(go) go is freed and thus bounce is leaked. |
| CVE-2024-27073 | In the Linux kernel, the following vulnerability has been resolved: media: ttpci: fix two memleaks in budget_av_attach When saa7146_register_device and saa7146_vv_init fails, budget_av_attach should free the resources it allocates, like the error-handling of ttpci_budget_init does. Besides, there are two fixme comment refers to such deallocations. |
| CVE-2024-27072 | In the Linux kernel, the following vulnerability has been resolved: media: usbtv: Remove useless locks in usbtv_video_free() Remove locks calls in usbtv_video_free() because are useless and may led to a deadlock as reported here: https://syzkaller.appspot.com/x/bisect.txt?x=166dc872180000 Also remove usbtv_stop() call since it will be called when unregistering the device. Before 'c838530d230b' this issue would only be noticed if you disconnect while streaming and now it is noticeable even when disconnecting while not streaming. [hverkuil: fix minor spelling mistake in log message] |
| CVE-2024-27071 | In the Linux kernel, the following vulnerability has been resolved: backlight: hx8357: Fix potential NULL pointer dereference The "im" pins are optional. Add missing check in the hx8357_probe(). |
| CVE-2024-27070 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use-after-free issue in f2fs_filemap_fault syzbot reports a f2fs bug as below: BUG: KASAN: slab-use-after-free in f2fs_filemap_fault+0xd1/0x2c0 fs/f2fs/file.c:49 Read of size 8 at addr ffff88807bb22680 by task syz-executor184/5058 CPU: 0 PID: 5058 Comm: syz-executor184 Not tainted 6.7.0-syzkaller-09928-g052d534373b7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x163/0x540 mm/kasan/report.c:488 kasan_report+0x142/0x170 mm/kasan/report.c:601 f2fs_filemap_fault+0xd1/0x2c0 fs/f2fs/file.c:49 __do_fault+0x131/0x450 mm/memory.c:4376 do_shared_fault mm/memory.c:4798 [inline] do_fault mm/memory.c:4872 [inline] do_pte_missing mm/memory.c:3745 [inline] handle_pte_fault mm/memory.c:5144 [inline] __handle_mm_fault+0x23b7/0x72b0 mm/memory.c:5285 handle_mm_fault+0x27e/0x770 mm/memory.c:5450 do_user_addr_fault arch/x86/mm/fault.c:1364 [inline] handle_page_fault arch/x86/mm/fault.c:1507 [inline] exc_page_fault+0x456/0x870 arch/x86/mm/fault.c:1563 asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:570 The root cause is: in f2fs_filemap_fault(), vmf->vma may be not alive after filemap_fault(), so it may cause use-after-free issue when accessing vmf->vma->vm_flags in trace_f2fs_filemap_fault(). So it needs to keep vm_flags in separated temporary variable for tracepoint use. |
| CVE-2024-27069 | In the Linux kernel, the following vulnerability has been resolved: ovl: relax WARN_ON in ovl_verify_area() syzbot hit an assertion in copy up data loop which looks like it is the result of a lower file whose size is being changed underneath overlayfs. This type of use case is documented to cause undefined behavior, so returning EIO error for the copy up makes sense, but it should not be causing a WARN_ON assertion. |
| CVE-2024-27068 | In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path If devm_krealloc() fails, then 'efuse' is leaking. So free it to avoid a leak. |
| CVE-2024-27067 | In the Linux kernel, the following vulnerability has been resolved: xen/evtchn: avoid WARN() when unbinding an event channel When unbinding a user event channel, the related handler might be called a last time in case the kernel was built with CONFIG_DEBUG_SHIRQ. This might cause a WARN() in the handler. Avoid that by adding an "unbinding" flag to struct user_event which will short circuit the handler. |
| CVE-2024-27066 | In the Linux kernel, the following vulnerability has been resolved: virtio: packed: fix unmap leak for indirect desc table When use_dma_api and premapped are true, then the do_unmap is false. Because the do_unmap is false, vring_unmap_extra_packed is not called by detach_buf_packed. if (unlikely(vq->do_unmap)) { curr = id; for (i = 0; i < state->num; i++) { vring_unmap_extra_packed(vq, &vq->packed.desc_extra[curr]); curr = vq->packed.desc_extra[curr].next; } } So the indirect desc table is not unmapped. This causes the unmap leak. So here, we check vq->use_dma_api instead. Synchronously, dma info is updated based on use_dma_api judgment This bug does not occur, because no driver use the premapped with indirect. |
| CVE-2024-27065 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not compare internal table flags on updates Restore skipping transaction if table update does not modify flags. |
| CVE-2024-27064 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix a memory leak in nf_tables_updchain If nft_netdev_register_hooks() fails, the memory associated with nft_stats is not freed, causing a memory leak. This patch fixes it by moving nft_stats_alloc() down after nft_netdev_register_hooks() succeeds. |
| CVE-2024-27063 | In the Linux kernel, the following vulnerability has been resolved: leds: trigger: netdev: Fix kernel panic on interface rename trig notify Commit d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode") in the various changes, reworked the way to set the LINKUP mode in commit cee4bd16c319 ("leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename") and moved it to a generic function. This changed the logic where, in the previous implementation the dev from the trigger event was used to check if the carrier was ok, but in the new implementation with the generic function, the dev in trigger_data is used instead. This is problematic and cause a possible kernel panic due to the fact that the dev in the trigger_data still reference the old one as the new one (passed from the trigger event) still has to be hold and saved in the trigger_data struct (done in the NETDEV_REGISTER case). On calling of get_device_state(), an invalid net_dev is used and this cause a kernel panic. To handle this correctly, move the call to get_device_state() after the new net_dev is correctly set in trigger_data (in the NETDEV_REGISTER case) and correctly parse the new dev. |
| CVE-2024-27062 | In the Linux kernel, the following vulnerability has been resolved: nouveau: lock the client object tree. It appears the client object tree has no locking unless I've missed something else. Fix races around adding/removing client objects, mostly vram bar mappings. 4562.099306] general protection fault, probably for non-canonical address 0x6677ed422bceb80c: 0000 [#1] PREEMPT SMP PTI [ 4562.099314] CPU: 2 PID: 23171 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 [ 4562.099324] Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 [ 4562.099330] RIP: 0010:nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099503] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 48 89 f8 48 85 f6 74 39 48 8b 87 a0 00 00 00 48 85 c0 74 12 <48> 8b 48 f8 48 39 ce 73 15 48 8b 40 10 48 85 c0 75 ee 48 c7 c0 fe [ 4562.099506] RSP: 0000:ffffa94cc420bbf8 EFLAGS: 00010206 [ 4562.099512] RAX: 6677ed422bceb814 RBX: ffff98108791f400 RCX: ffff9810f26b8f58 [ 4562.099517] RDX: 0000000000000000 RSI: ffff9810f26b9158 RDI: ffff98108791f400 [ 4562.099519] RBP: ffff9810f26b9158 R08: 0000000000000000 R09: 0000000000000000 [ 4562.099521] R10: ffffa94cc420bc48 R11: 0000000000000001 R12: ffff9810f02a7cc0 [ 4562.099526] R13: 0000000000000000 R14: 00000000000000ff R15: 0000000000000007 [ 4562.099528] FS: 00007f629c5017c0(0000) GS:ffff98142c700000(0000) knlGS:0000000000000000 [ 4562.099534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4562.099536] CR2: 00007f629a882000 CR3: 000000017019e004 CR4: 00000000003706f0 [ 4562.099541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4562.099542] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4562.099544] Call Trace: [ 4562.099555] <TASK> [ 4562.099573] ? die_addr+0x36/0x90 [ 4562.099583] ? exc_general_protection+0x246/0x4a0 [ 4562.099593] ? asm_exc_general_protection+0x26/0x30 [ 4562.099600] ? nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099730] nvkm_ioctl+0xa1/0x250 [nouveau] [ 4562.099861] nvif_object_map_handle+0xc8/0x180 [nouveau] [ 4562.099986] nouveau_ttm_io_mem_reserve+0x122/0x270 [nouveau] [ 4562.100156] ? dma_resv_test_signaled+0x26/0xb0 [ 4562.100163] ttm_bo_vm_fault_reserved+0x97/0x3c0 [ttm] [ 4562.100182] ? __mutex_unlock_slowpath+0x2a/0x270 [ 4562.100189] nouveau_ttm_fault+0x69/0xb0 [nouveau] [ 4562.100356] __do_fault+0x32/0x150 [ 4562.100362] do_fault+0x7c/0x560 [ 4562.100369] __handle_mm_fault+0x800/0xc10 [ 4562.100382] handle_mm_fault+0x17c/0x3e0 [ 4562.100388] do_user_addr_fault+0x208/0x860 [ 4562.100395] exc_page_fault+0x7f/0x200 [ 4562.100402] asm_exc_page_fault+0x26/0x30 [ 4562.100412] RIP: 0033:0x9b9870 [ 4562.100419] Code: 85 a8 f7 ff ff 8b 8d 80 f7 ff ff 89 08 e9 18 f2 ff ff 0f 1f 84 00 00 00 00 00 44 89 32 e9 90 fa ff ff 0f 1f 84 00 00 00 00 00 <44> 89 32 e9 f8 f1 ff ff 0f 1f 84 00 00 00 00 00 66 44 89 32 e9 e7 [ 4562.100422] RSP: 002b:00007fff9ba2dc70 EFLAGS: 00010246 [ 4562.100426] RAX: 0000000000000004 RBX: 000000000dd65e10 RCX: 000000fff0000000 [ 4562.100428] RDX: 00007f629a882000 RSI: 00007f629a882000 RDI: 0000000000000066 [ 4562.100432] RBP: 00007fff9ba2e570 R08: 0000000000000000 R09: 0000000123ddf000 [ 4562.100434] R10: 0000000000000001 R11: 0000000000000246 R12: 000000007fffffff [ 4562.100436] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 4562.100446] </TASK> [ 4562.100448] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink cmac bnep sunrpc iwlmvm intel_rapl_msr intel_rapl_common snd_sof_pci_intel_cnl x86_pkg_temp_thermal intel_powerclamp snd_sof_intel_hda_common mac80211 coretemp snd_soc_acpi_intel_match kvm_intel snd_soc_acpi snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda_mlink ---truncated--- |
| CVE-2024-27061 | In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ce - Fix use after free in unprepare sun8i_ce_cipher_unprepare should be called before crypto_finalize_skcipher_request, because client callbacks may immediately free memory, that isn't needed anymore. But it will be used by unprepare after free. Before removing prepare/unprepare callbacks it was handled by crypto engine in crypto_finalize_request. Usually that results in a pointer dereference problem during a in crypto selftest. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000004716d000 [0000000000000030] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP This problem is detected by KASAN as well. ================================================================== BUG: KASAN: slab-use-after-free in sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce] Read of size 8 at addr ffff00000dcdc040 by task 1c15000.crypto-/373 Hardware name: Pine64 PinePhone (1.2) (DT) Call trace: dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5d8 kasan_report+0x90/0xd0 __asan_load8+0x9c/0xc0 sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce] crypto_pump_work+0x354/0x620 [crypto_engine] kthread_worker_fn+0x244/0x498 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Allocated by task 379: kasan_save_stack+0x3c/0x68 kasan_set_track+0x2c/0x40 kasan_save_alloc_info+0x24/0x38 __kasan_kmalloc+0xd4/0xd8 __kmalloc+0x74/0x1d0 alg_test_skcipher+0x90/0x1f0 alg_test+0x24c/0x830 cryptomgr_test+0x38/0x60 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Freed by task 379: kasan_save_stack+0x3c/0x68 kasan_set_track+0x2c/0x40 kasan_save_free_info+0x38/0x60 __kasan_slab_free+0x100/0x170 slab_free_freelist_hook+0xd4/0x1e8 __kmem_cache_free+0x15c/0x290 kfree+0x74/0x100 kfree_sensitive+0x80/0xb0 alg_test_skcipher+0x12c/0x1f0 alg_test+0x24c/0x830 cryptomgr_test+0x38/0x60 kthread+0x168/0x178 ret_from_fork+0x10/0x20 The buggy address belongs to the object at ffff00000dcdc000 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 64 bytes inside of freed 256-byte region [ffff00000dcdc000, ffff00000dcdc100) |
| CVE-2024-27060 | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix NULL pointer dereference in tb_port_update_credits() Olliver reported that his system crashes when plugging in Thunderbolt 1 device: BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:tb_port_do_update_credits+0x1b/0x130 [thunderbolt] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tb_port_do_update_credits+0x1b/0x130 ? tb_switch_update_link_attributes+0x83/0xd0 tb_switch_add+0x7a2/0xfe0 tb_scan_port+0x236/0x6f0 tb_handle_hotplug+0x6db/0x900 process_one_work+0x171/0x340 worker_thread+0x27b/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This is due the fact that some Thunderbolt 1 devices only have one lane adapter. Fix this by checking for the lane 1 before we read its credits. |
| CVE-2024-27059 | In the Linux kernel, the following vulnerability has been resolved: USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command The isd200 sub-driver in usb-storage uses the HEADS and SECTORS values in the ATA ID information to calculate cylinder and head values when creating a CDB for READ or WRITE commands. The calculation involves division and modulus operations, which will cause a crash if either of these values is 0. While this never happens with a genuine device, it could happen with a flawed or subversive emulation, as reported by the syzbot fuzzer. Protect against this possibility by refusing to bind to the device if either the ATA_ID_HEADS or ATA_ID_SECTORS value in the device's ID information is 0. This requires isd200_Initialization() to return a negative error code when initialization fails; currently it always returns 0 (even when there is an error). |
| CVE-2024-27058 | In the Linux kernel, the following vulnerability has been resolved: tmpfs: fix race on handling dquot rbtree A syzkaller reproducer found a race while attempting to remove dquot information from the rb tree. Fetching the rb_tree root node must also be protected by the dqopt->dqio_sem, otherwise, giving the right timing, shmem_release_dquot() will trigger a warning because it couldn't find a node in the tree, when the real reason was the root node changing before the search starts: Thread 1 Thread 2 - shmem_release_dquot() - shmem_{acquire,release}_dquot() - fetch ROOT - Fetch ROOT - acquire dqio_sem - wait dqio_sem - do something, triger a tree rebalance - release dqio_sem - acquire dqio_sem - start searching for the node, but from the wrong location, missing the node, and triggering a warning. |
| CVE-2024-27057 | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend When the system is suspended while audio is active, the sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during suspend the DSP is turned off, streams will be re-started after resume. If the firmware crashes during while audio is running (or when we reset the stream before suspend) then the sof_ipc4_set_multi_pipeline_state() will fail with IPC error and the state change is interrupted. This will cause misalignment between the kernel and firmware state on next DSP boot resulting errors returned by firmware for IPC messages, eventually failing the audio resume. On stream close the errors are ignored so the kernel state will be corrected on the next DSP boot, so the second boot after the DSP panic. If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then state parameter is SOF_IPC4_PIPE_RESET and only in this case. Treat a forced pipeline reset similarly to how we treat a pcm_free by ignoring error on state sending to allow the kernel's state to be consistent with the state the firmware will have after the next boot. |
| CVE-2024-27056 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: ensure offloading TID queue exists The resume code path assumes that the TX queue for the offloading TID has been configured. At resume time it then tries to sync the write pointer as it may have been updated by the firmware. In the unusual event that no packets have been send on TID 0, the queue will not have been allocated and this causes a crash. Fix this by ensuring the queue exist at suspend time. |
| CVE-2024-27055 | In the Linux kernel, the following vulnerability has been resolved: workqueue: Don't call cpumask_test_cpu() with -1 CPU in wq_update_node_max_active() For wq_update_node_max_active(), @off_cpu of -1 indicates that no CPU is going down. The function was incorrectly calling cpumask_test_cpu() with -1 CPU leading to oopses like the following on some archs: Unable to handle kernel paging request at virtual address ffff0002100296e0 .. pc : wq_update_node_max_active+0x50/0x1fc lr : wq_update_node_max_active+0x1f0/0x1fc ... Call trace: wq_update_node_max_active+0x50/0x1fc apply_wqattrs_commit+0xf0/0x114 apply_workqueue_attrs_locked+0x58/0xa0 alloc_workqueue+0x5ac/0x774 workqueue_init_early+0x460/0x540 start_kernel+0x258/0x684 __primary_switched+0xb8/0xc0 Code: 9100a273 35000d01 53067f00 d0016dc1 (f8607a60) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- Fix it. |
| CVE-2024-27054 | In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix double module refcount decrement Once the discipline is associated with the device, deleting the device takes care of decrementing the module's refcount. Doing it manually on this error path causes refcount to artificially decrease on each error while it should just stay the same. |
| CVE-2024-27053 | In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix RCU usage in connect path With lockdep enabled, calls to the connect function from cfg802.11 layer lead to the following warning: ============================= WARNING: suspicious RCU usage 6.7.0-rc1-wt+ #333 Not tainted ----------------------------- drivers/net/wireless/microchip/wilc1000/hif.c:386 suspicious rcu_dereference_check() usage! [...] stack backtrace: CPU: 0 PID: 100 Comm: wpa_supplicant Not tainted 6.7.0-rc1-wt+ #333 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from wilc_parse_join_bss_param+0x7dc/0x7f4 wilc_parse_join_bss_param from connect+0x2c4/0x648 connect from cfg80211_connect+0x30c/0xb74 cfg80211_connect from nl80211_connect+0x860/0xa94 nl80211_connect from genl_rcv_msg+0x3fc/0x59c genl_rcv_msg from netlink_rcv_skb+0xd0/0x1f8 netlink_rcv_skb from genl_rcv+0x2c/0x3c genl_rcv from netlink_unicast+0x3b0/0x550 netlink_unicast from netlink_sendmsg+0x368/0x688 netlink_sendmsg from ____sys_sendmsg+0x190/0x430 ____sys_sendmsg from ___sys_sendmsg+0x110/0x158 ___sys_sendmsg from sys_sendmsg+0xe8/0x150 sys_sendmsg from ret_fast_syscall+0x0/0x1c This warning is emitted because in the connect path, when trying to parse target BSS parameters, we dereference a RCU pointer whithout being in RCU critical section. Fix RCU dereference usage by moving it to a RCU read critical section. To avoid wrapping the whole wilc_parse_join_bss_param under the critical section, just use the critical section to copy ies data |
| CVE-2024-27052 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtl8xxxu: add cancel_work_sync() for c2hcmd_work The workqueue might still be running, when the driver is stopped. To avoid a use-after-free, call cancel_work_sync() in rtl8xxxu_stop(). |
| CVE-2024-27051 | In the Linux kernel, the following vulnerability has been resolved: cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it and return 0 in case of error. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-27050 | In the Linux kernel, the following vulnerability has been resolved: libbpf: Use OPTS_SET() macro in bpf_xdp_query() When the feature_flags and xdp_zc_max_segs fields were added to the libbpf bpf_xdp_query_opts, the code writing them did not use the OPTS_SET() macro. This causes libbpf to write to those fields unconditionally, which means that programs compiled against an older version of libbpf (with a smaller size of the bpf_xdp_query_opts struct) will have its stack corrupted by libbpf writing out of bounds. The patch adding the feature_flags field has an early bail out if the feature_flags field is not part of the opts struct (via the OPTS_HAS) macro, but the patch adding xdp_zc_max_segs does not. For consistency, this fix just changes the assignments to both fields to use the OPTS_SET() macro. |
| CVE-2024-27049 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925e: fix use-after-free in free_irq() From commit a304e1b82808 ("[PATCH] Debug shared irqs"), there is a test to make sure the shared irq handler should be able to handle the unexpected event after deregistration. For this case, let's apply MT76_REMOVED flag to indicate the device was removed and do not run into the resource access anymore. |
| CVE-2024-27048 | In the Linux kernel, the following vulnerability has been resolved: wifi: brcm80211: handle pmk_op allocation failure The kzalloc() in brcmf_pmksa_v3_op() will return null if the physical memory has run out. As a result, if we dereference the null value, the null pointer dereference bug will happen. Return -ENOMEM from brcmf_pmksa_v3_op() if kzalloc() fails for pmk_op. |
| CVE-2024-27047 | In the Linux kernel, the following vulnerability has been resolved: net: phy: fix phy_get_internal_delay accessing an empty array The phy_get_internal_delay function could try to access to an empty array in the case that the driver is calling phy_get_internal_delay without defining delay_values and rx-internal-delay-ps or tx-internal-delay-ps is defined to 0 in the device-tree. This will lead to "unable to handle kernel NULL pointer dereference at virtual address 0". To avoid this kernel oops, the test should be delay >= 0. As there is already delay < 0 test just before, the test could only be size == 0. |
| CVE-2024-27046 | In the Linux kernel, the following vulnerability has been resolved: nfp: flower: handle acti_netdevs allocation failure The kmalloc_array() in nfp_fl_lag_do_work() will return null, if the physical memory has run out. As a result, if we dereference the acti_netdevs, the null pointer dereference bugs will happen. This patch adds a check to judge whether allocation failure occurs. If it happens, the delayed work will be rescheduled and try again. |
| CVE-2024-27045 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()' Tell snprintf() to store at most 10 bytes in the output buffer instead of 30. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1508 dp_dsc_clock_en_read() error: snprintf() is printing too much 30 vs 10 |
| CVE-2024-27044 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential NULL pointer dereferences in 'dcn10_set_output_transfer_func()' The 'stream' pointer is used in dcn10_set_output_transfer_func() before the check if 'stream' is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875) |
| CVE-2024-27043 | In the Linux kernel, the following vulnerability has been resolved: media: edia: dvbdev: fix a use-after-free In dvb_register_device, *pdvbdev is set equal to dvbdev, which is freed in several error-handling paths. However, *pdvbdev is not set to NULL after dvbdev's deallocation, causing use-after-frees in many places, for example, in the following call chain: budget_register |-> dvb_dmxdev_init |-> dvb_register_device |-> dvb_dmxdev_release |-> dvb_unregister_device |-> dvb_remove_device |-> dvb_device_put |-> kref_put When calling dvb_unregister_device, dmxdev->dvbdev (i.e. *pdvbdev in dvb_register_device) could point to memory that had been freed in dvb_register_device. Thereafter, this pointer is transferred to kref_put and triggering a use-after-free. |
| CVE-2024-27042 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential out-of-bounds access in 'amdgpu_discovery_reg_base_init()' The issue arises when the array 'adev->vcn.vcn_config' is accessed before checking if the index 'adev->vcn.num_vcn_inst' is within the bounds of the array. The fix involves moving the bounds check before the array access. This ensures that 'adev->vcn.num_vcn_inst' is within the bounds of the array before it is used as an index. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1289 amdgpu_discovery_reg_base_init() error: testing array offset 'adev->vcn.num_vcn_inst' after use. |
| CVE-2024-27041 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini() Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL before the call to dc_enable_dmub_notifications(), check beforehand to ensure there will not be a possible NULL-ptr-deref there. Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in 'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy(). Clean up by combining them all under one 'if'. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. |
| CVE-2024-27040 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add 'replay' NULL check in 'edp_set_replay_allow_active()' In the first if statement, we're checking if 'replay' is NULL. But in the second if statement, we're not checking if 'replay' is NULL again before calling replay->funcs->replay_set_power_opt(). if (replay == NULL && force_static) return false; ... if (link->replay_settings.replay_feature_enabled && replay->funcs->replay_set_power_opt) { replay->funcs->replay_set_power_opt(replay, *power_opts, panel_inst); link->replay_settings.replay_power_opt_active = *power_opts; } If 'replay' is NULL, this will cause a null pointer dereference. Fixes the below found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c:895 edp_set_replay_allow_active() error: we previously assumed 'replay' could be null (see line 887) |
| CVE-2024-27039 | In the Linux kernel, the following vulnerability has been resolved: clk: hisilicon: hi3559a: Fix an erroneous devm_kfree() 'p_clk' is an array allocated just before the for loop for all clk that need to be registered. It is incremented at each loop iteration. If a clk_register() call fails, 'p_clk' may point to something different from what should be freed. The best we can do, is to avoid this wrong release of memory. |
| CVE-2024-27038 | In the Linux kernel, the following vulnerability has been resolved: clk: Fix clk_core_get NULL dereference It is possible for clk_core_get to dereference a NULL in the following sequence: clk_core_get() of_clk_get_hw_from_clkspec() __of_clk_get_hw_from_provider() __clk_get_hw() __clk_get_hw() can return NULL which is dereferenced by clk_core_get() at hw->core. Prior to commit dde4eff47c82 ("clk: Look for parents with clkdev based clk_lookups") the check IS_ERR_OR_NULL() was performed which would have caught the NULL. Reading the description of this function it talks about returning NULL but that cannot be so at the moment. Update the function to check for hw before dereferencing it and return NULL if hw is NULL. |
| CVE-2024-27037 | In the Linux kernel, the following vulnerability has been resolved: clk: zynq: Prevent null pointer dereference caused by kmalloc failure The kmalloc() in zynq_clk_setup() will return null if the physical memory has run out. As a result, if we use snprintf() to write data to the null address, the null pointer dereference bug will happen. This patch uses a stack variable to replace the kmalloc(). |
| CVE-2024-27036 | In the Linux kernel, the following vulnerability has been resolved: cifs: Fix writeback data corruption cifs writeback doesn't correctly handle the case where cifs_extend_writeback() hits a point where it is considering an additional folio, but this would overrun the wsize - at which point it drops out of the xarray scanning loop and calls xas_pause(). The problem is that xas_pause() advances the loop counter - thereby skipping that page. What needs to happen is for xas_reset() to be called any time we decide we don't want to process the page we're looking at, but rather send the request we are building and start a new one. Fix this by copying and adapting the netfslib writepages code as a temporary measure, with cifs writeback intending to be offloaded to netfslib in the near future. This also fixes the issue with the use of filemap_get_folios_tag() causing retry of a bunch of pages which the extender already dealt with. This can be tested by creating, say, a 64K file somewhere not on cifs (otherwise copy-offload may get underfoot), mounting a cifs share with a wsize of 64000, copying the file to it and then comparing the original file and the copy: dd if=/dev/urandom of=/tmp/64K bs=64k count=1 mount //192.168.6.1/test /mnt -o user=...,pass=...,wsize=64000 cp /tmp/64K /mnt/64K cmp /tmp/64K /mnt/64K Without the fix, the cmp fails at position 64000 (or shortly thereafter). |
| CVE-2024-27035 | In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix to guarantee persisting compressed blocks by CP If data block in compressed cluster is not persisted with metadata during checkpoint, after SPOR, the data may be corrupted, let's guarantee to write compressed page by checkpoint. |
| CVE-2024-27034 | In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix to cover normal cluster write with cp_rwsem When we overwrite compressed cluster w/ normal cluster, we should not unlock cp_rwsem during f2fs_write_raw_pages(), otherwise data will be corrupted if partial blocks were persisted before CP & SPOR, due to cluster metadata wasn't updated atomically. |
| CVE-2024-27033 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to remove unnecessary f2fs_bug_on() to avoid panic verify_blkaddr() will trigger panic once we inject fault into f2fs_is_valid_blkaddr(), fix to remove this unnecessary f2fs_bug_on(). |
| CVE-2024-27032 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential panic during recovery During recovery, if FAULT_BLOCK is on, it is possible that f2fs_reserve_new_block() will return -ENOSPC during recovery, then it may trigger panic. Also, if fault injection rate is 1 and only FAULT_BLOCK fault type is on, it may encounter deadloop in loop of block reservation. Let's change as below to fix these issues: - remove bug_on() to avoid panic. - limit the loop count of block reservation to avoid potential deadloop. |
| CVE-2024-27031 | In the Linux kernel, the following vulnerability has been resolved: NFS: Fix nfs_netfs_issue_read() xarray locking for writeback interrupt The loop inside nfs_netfs_issue_read() currently does not disable interrupts while iterating through pages in the xarray to submit for NFS read. This is not safe though since after taking xa_lock, another page in the mapping could be processed for writeback inside an interrupt, and deadlock can occur. The fix is simple and clean if we use xa_for_each_range(), which handles the iteration with RCU while reducing code complexity. The problem is easily reproduced with the following test: mount -o vers=3,fsc 127.0.0.1:/export /mnt/nfs dd if=/dev/zero of=/mnt/nfs/file1.bin bs=4096 count=1 echo 3 > /proc/sys/vm/drop_caches dd if=/mnt/nfs/file1.bin of=/dev/null umount /mnt/nfs On the console with a lockdep-enabled kernel a message similar to the following will be seen: ================================ WARNING: inconsistent lock state 6.7.0-lockdbg+ #10 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. test5/1708 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888127baa598 (&xa->xa_lock#4){+.?.}-{3:3}, at: nfs_netfs_issue_read+0x1b2/0x4b0 [nfs] {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x144/0x380 _raw_spin_lock_irqsave+0x4e/0xa0 __folio_end_writeback+0x17e/0x5c0 folio_end_writeback+0x93/0x1b0 iomap_finish_ioend+0xeb/0x6a0 blk_update_request+0x204/0x7f0 blk_mq_end_request+0x30/0x1c0 blk_complete_reqs+0x7e/0xa0 __do_softirq+0x113/0x544 __irq_exit_rcu+0xfe/0x120 irq_exit_rcu+0xe/0x20 sysvec_call_function_single+0x6f/0x90 asm_sysvec_call_function_single+0x1a/0x20 pv_native_safe_halt+0xf/0x20 default_idle+0x9/0x20 default_idle_call+0x67/0xa0 do_idle+0x2b5/0x300 cpu_startup_entry+0x34/0x40 start_secondary+0x19d/0x1c0 secondary_startup_64_no_verify+0x18f/0x19b irq event stamp: 176891 hardirqs last enabled at (176891): [<ffffffffa67a0be4>] _raw_spin_unlock_irqrestore+0x44/0x60 hardirqs last disabled at (176890): [<ffffffffa67a0899>] _raw_spin_lock_irqsave+0x79/0xa0 softirqs last enabled at (176646): [<ffffffffa515d91e>] __irq_exit_rcu+0xfe/0x120 softirqs last disabled at (176633): [<ffffffffa515d91e>] __irq_exit_rcu+0xfe/0x120 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xa->xa_lock#4); <Interrupt> lock(&xa->xa_lock#4); *** DEADLOCK *** 2 locks held by test5/1708: #0: ffff888127baa498 (&sb->s_type->i_mutex_key#22){++++}-{4:4}, at: nfs_start_io_read+0x28/0x90 [nfs] #1: ffff888127baa650 (mapping.invalidate_lock#3){.+.+}-{4:4}, at: page_cache_ra_unbounded+0xa4/0x280 stack backtrace: CPU: 6 PID: 1708 Comm: test5 Kdump: loaded Not tainted 6.7.0-lockdbg+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 Call Trace: dump_stack_lvl+0x5b/0x90 mark_lock+0xb3f/0xd20 __lock_acquire+0x77b/0x3360 _raw_spin_lock+0x34/0x80 nfs_netfs_issue_read+0x1b2/0x4b0 [nfs] netfs_begin_read+0x77f/0x980 [netfs] nfs_netfs_readahead+0x45/0x60 [nfs] nfs_readahead+0x323/0x5a0 [nfs] read_pages+0xf3/0x5c0 page_cache_ra_unbounded+0x1c8/0x280 filemap_get_pages+0x38c/0xae0 filemap_read+0x206/0x5e0 nfs_file_read+0xb7/0x140 [nfs] vfs_read+0x2a9/0x460 ksys_read+0xb7/0x140 |
| CVE-2024-27030 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Use separate handlers for interrupts For PF to AF interrupt vector and VF to AF vector same interrupt handler is registered which is causing race condition. When two interrupts are raised to two CPUs at same time then two cores serve same event corrupting the data. |
| CVE-2024-27029 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix mmhub client id out-of-bounds access Properly handle cid 0x140. |
| CVE-2024-27028 | In the Linux kernel, the following vulnerability has been resolved: spi: spi-mt65xx: Fix NULL pointer access in interrupt handler The TX buffer in spi_transfer can be a NULL pointer, so the interrupt handler may end up writing to the invalid memory and cause crashes. Add a check to trans->tx_buf before using it. |
| CVE-2024-27027 | In the Linux kernel, the following vulnerability has been resolved: dpll: fix dpll_xa_ref_*_del() for multiple registrations Currently, if there are multiple registrations of the same pin on the same dpll device, following warnings are observed: WARNING: CPU: 5 PID: 2212 at drivers/dpll/dpll_core.c:143 dpll_xa_ref_pin_del.isra.0+0x21e/0x230 WARNING: CPU: 5 PID: 2212 at drivers/dpll/dpll_core.c:223 __dpll_pin_unregister+0x2b3/0x2c0 The problem is, that in both dpll_xa_ref_dpll_del() and dpll_xa_ref_pin_del() registration is only removed from list in case the reference count drops to zero. That is wrong, the registration has to be removed always. To fix this, remove the registration from the list and free it unconditionally, instead of doing it only when the ref reference counter reaches zero. |
| CVE-2024-27026 | In the Linux kernel, the following vulnerability has been resolved: vmxnet3: Fix missing reserved tailroom Use rbi->len instead of rcd->len for non-dataring packet. Found issue: XDP_WARN: xdp_update_frame_from_buff(line:278): Driver BUG: missing reserved tailroom WARNING: CPU: 0 PID: 0 at net/core/xdp.c:586 xdp_warn+0xf/0x20 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 6.5.1 #1 RIP: 0010:xdp_warn+0xf/0x20 ... ? xdp_warn+0xf/0x20 xdp_do_redirect+0x15f/0x1c0 vmxnet3_run_xdp+0x17a/0x400 [vmxnet3] vmxnet3_process_xdp+0xe4/0x760 [vmxnet3] ? vmxnet3_tq_tx_complete.isra.0+0x21e/0x2c0 [vmxnet3] vmxnet3_rq_rx_complete+0x7ad/0x1120 [vmxnet3] vmxnet3_poll_rx_only+0x2d/0xa0 [vmxnet3] __napi_poll+0x20/0x180 net_rx_action+0x177/0x390 |
| CVE-2024-27025 | In the Linux kernel, the following vulnerability has been resolved: nbd: null check for nla_nest_start nla_nest_start() may fail and return NULL. Insert a check and set errno based on other call sites within the same source code. |
| CVE-2024-27024 | In the Linux kernel, the following vulnerability has been resolved: net/rds: fix WARNING in rds_conn_connect_if_down If connection isn't established yet, get_mr() will fail, trigger connection after get_mr(). |
| CVE-2024-27023 | In the Linux kernel, the following vulnerability has been resolved: md: Fix missing release of 'active_io' for flush submit_flushes atomic_set(&mddev->flush_pending, 1); rdev_for_each_rcu(rdev, mddev) atomic_inc(&mddev->flush_pending); bi->bi_end_io = md_end_flush submit_bio(bi); /* flush io is done first */ md_end_flush if (atomic_dec_and_test(&mddev->flush_pending)) percpu_ref_put(&mddev->active_io) -> active_io is not released if (atomic_dec_and_test(&mddev->flush_pending)) -> missing release of active_io For consequence, mddev_suspend() will wait for 'active_io' to be zero forever. Fix this problem by releasing 'active_io' in submit_flushes() if 'flush_pending' is decreased to zero. |
| CVE-2024-27022 | In the Linux kernel, the following vulnerability has been resolved: fork: defer linking file vma until vma is fully initialized Thorvald reported a WARNING [1]. And the root cause is below race: CPU 1 CPU 2 fork hugetlbfs_fallocate dup_mmap hugetlbfs_punch_hole i_mmap_lock_write(mapping); vma_interval_tree_insert_after -- Child vma is visible through i_mmap tree. i_mmap_unlock_write(mapping); hugetlb_dup_vma_private -- Clear vma_lock outside i_mmap_rwsem! i_mmap_lock_write(mapping); hugetlb_vmdelete_list vma_interval_tree_foreach hugetlb_vma_trylock_write -- Vma_lock is cleared. tmp->vm_ops->open -- Alloc new vma_lock outside i_mmap_rwsem! hugetlb_vma_unlock_write -- Vma_lock is assigned!!! i_mmap_unlock_write(mapping); hugetlb_dup_vma_private() and hugetlb_vm_op_open() are called outside i_mmap_rwsem lock while vma lock can be used in the same time. Fix this by deferring linking file vma until vma is fully initialized. Those vmas should be initialized first before they can be used. |
| CVE-2024-27021 | In the Linux kernel, the following vulnerability has been resolved: r8169: fix LED-related deadlock on module removal Binding devm_led_classdev_register() to the netdev is problematic because on module removal we get a RTNL-related deadlock. Fix this by avoiding the device-managed LED functions. Note: We can safely call led_classdev_unregister() for a LED even if registering it failed, because led_classdev_unregister() detects this and is a no-op in this case. |
| CVE-2024-27020 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get() nft_unregister_expr() can concurrent with __nft_expr_type_get(), and there is not any protection when iterate over nf_tables_expressions list in __nft_expr_type_get(). Therefore, there is potential data-race of nf_tables_expressions list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_expressions list in __nft_expr_type_get(), and use rcu_read_lock() in the caller nft_expr_type_get() to protect the entire type query process. |
| CVE-2024-27019 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get() nft_unregister_obj() can concurrent with __nft_obj_type_get(), and there is not any protection when iterate over nf_tables_objects list in __nft_obj_type_get(). Therefore, there is potential data-race of nf_tables_objects list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_objects list in __nft_obj_type_get(), and use rcu_read_lock() in the caller nft_obj_type_get() to protect the entire type query process. |
| CVE-2024-27018 | In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: skip conntrack input hook for promisc packets For historical reasons, when bridge device is in promisc mode, packets that are directed to the taps follow bridge input hook path. This patch adds a workaround to reset conntrack for these packets. Jianbo Liu reports warning splats in their test infrastructure where cloned packets reach the br_netfilter input hook to confirm the conntrack object. Scratch one bit from BR_INPUT_SKB_CB to annotate that this packet has reached the input hook because it is passed up to the bridge device to reach the taps. [ 57.571874] WARNING: CPU: 1 PID: 0 at net/bridge/br_netfilter_hooks.c:616 br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.572749] Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_isc si ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5ctl mlx5_core [ 57.575158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0+ #19 [ 57.575700] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 57.576662] RIP: 0010:br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.577195] Code: fe ff ff 41 bd 04 00 00 00 be 04 00 00 00 e9 4a ff ff ff be 04 00 00 00 48 89 ef e8 f3 a9 3c e1 66 83 ad b4 00 00 00 04 eb 91 <0f> 0b e9 f1 fe ff ff 0f 0b e9 df fe ff ff 48 89 df e8 b3 53 47 e1 [ 57.578722] RSP: 0018:ffff88885f845a08 EFLAGS: 00010202 [ 57.579207] RAX: 0000000000000002 RBX: ffff88812dfe8000 RCX: 0000000000000000 [ 57.579830] RDX: ffff88885f845a60 RSI: ffff8881022dc300 RDI: 0000000000000000 [ 57.580454] RBP: ffff88885f845a60 R08: 0000000000000001 R09: 0000000000000003 [ 57.581076] R10: 00000000ffff1300 R11: 0000000000000002 R12: 0000000000000000 [ 57.581695] R13: ffff8881047ffe00 R14: ffff888108dbee00 R15: ffff88814519b800 [ 57.582313] FS: 0000000000000000(0000) GS:ffff88885f840000(0000) knlGS:0000000000000000 [ 57.583040] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 57.583564] CR2: 000000c4206aa000 CR3: 0000000103847001 CR4: 0000000000370eb0 [ 57.584194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 57.584820] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 57.585440] Call Trace: [ 57.585721] <IRQ> [ 57.585976] ? __warn+0x7d/0x130 [ 57.586323] ? br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.586811] ? report_bug+0xf1/0x1c0 [ 57.587177] ? handle_bug+0x3f/0x70 [ 57.587539] ? exc_invalid_op+0x13/0x60 [ 57.587929] ? asm_exc_invalid_op+0x16/0x20 [ 57.588336] ? br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.588825] nf_hook_slow+0x3d/0xd0 [ 57.589188] ? br_handle_vlan+0x4b/0x110 [ 57.589579] br_pass_frame_up+0xfc/0x150 [ 57.589970] ? br_port_flags_change+0x40/0x40 [ 57.590396] br_handle_frame_finish+0x346/0x5e0 [ 57.590837] ? ipt_do_table+0x32e/0x430 [ 57.591221] ? br_handle_local_finish+0x20/0x20 [ 57.591656] br_nf_hook_thresh+0x4b/0xf0 [br_netfilter] [ 57.592286] ? br_handle_local_finish+0x20/0x20 [ 57.592802] br_nf_pre_routing_finish+0x178/0x480 [br_netfilter] [ 57.593348] ? br_handle_local_finish+0x20/0x20 [ 57.593782] ? nf_nat_ipv4_pre_routing+0x25/0x60 [nf_nat] [ 57.594279] br_nf_pre_routing+0x24c/0x550 [br_netfilter] [ 57.594780] ? br_nf_hook_thresh+0xf0/0xf0 [br_netfilter] [ 57.595280] br_handle_frame+0x1f3/0x3d0 [ 57.595676] ? br_handle_local_finish+0x20/0x20 [ 57.596118] ? br_handle_frame_finish+0x5e0/0x5e0 [ 57.596566] __netif_receive_skb_core+0x25b/0xfc0 [ 57.597017] ? __napi_build_skb+0x37/0x40 [ 57.597418] __netif_receive_skb_list_core+0xfb/0x220 |
| CVE-2024-27017 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: walk over current view on netlink dump The generation mask can be updated while netlink dump is in progress. The pipapo set backend walk iterator cannot rely on it to infer what view of the datastructure is to be used. Add notation to specify if user wants to read/update the set. Based on patch from Florian Westphal. |
| CVE-2024-27016 | In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: validate pppoe header Ensure there is sufficient room to access the protocol field of the PPPoe header. Validate it once before the flowtable lookup, then use a helper function to access protocol field. |
| CVE-2024-27015 | In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: incorrect pppoe tuple pppoe traffic reaching ingress path does not match the flowtable entry because the pppoe header is expected to be at the network header offset. This bug causes a mismatch in the flow table lookup, so pppoe packets enter the classical forwarding path. |
| CVE-2024-27014 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent deadlock while disabling aRFS When disabling aRFS under the `priv->state_lock`, any scheduled aRFS works are canceled using the `cancel_work_sync` function, which waits for the work to end if it has already started. However, while waiting for the work handler, the handler will try to acquire the `state_lock` which is already acquired. The worker acquires the lock to delete the rules if the state is down, which is not the worker's responsibility since disabling aRFS deletes the rules. Add an aRFS state variable, which indicates whether the aRFS is enabled and prevent adding rules when the aRFS is disabled. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Tainted: G I ------------------------------------------------------ ethtool/386089 is trying to acquire lock: ffff88810f21ce68 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}, at: __flush_work+0x74/0x4e0 but task is already holding lock: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x80/0xc90 arfs_handle_work+0x4b/0x3b0 [mlx5_core] process_one_work+0x1dc/0x4a0 worker_thread+0x1bf/0x3c0 kthread+0xd7/0x100 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}: __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 __flush_work+0x7a/0x4e0 __cancel_work_timer+0x131/0x1c0 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); *** DEADLOCK *** 3 locks held by ethtool/386089: #0: ffffffff82ea7210 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 #1: ffffffff82e94c88 (rtnl_mutex){+.+.}-{3:3}, at: ethnl_default_set_doit+0xd3/0x240 #2: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] stack backtrace: CPU: 15 PID: 386089 Comm: ethtool Tainted: G I 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x60/0xa0 check_noncircular+0x144/0x160 __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 ? __flush_work+0x74/0x4e0 ? save_trace+0x3e/0x360 ? __flush_work+0x74/0x4e0 __flush_work+0x7a/0x4e0 ? __flush_work+0x74/0x4e0 ? __lock_acquire+0xa78/0x2c80 ? lock_acquire+0xd0/0x2b0 ? mark_held_locks+0x49/0x70 __cancel_work_timer+0x131/0x1c0 ? mark_held_locks+0x49/0x70 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 ? ethn ---truncated--- |
| CVE-2024-27013 | In the Linux kernel, the following vulnerability has been resolved: tun: limit printing rate when illegal packet received by tun dev vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f |
| CVE-2024-27012 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: restore set elements when delete set fails From abort path, nft_mapelem_activate() needs to restore refcounters to the original state. Currently, it uses the set->ops->walk() to iterate over these set elements. The existing set iterator skips inactive elements in the next generation, this does not work from the abort path to restore the original state since it has to skip active elements instead (not inactive ones). This patch moves the check for inactive elements to the set iterator callback, then it reverses the logic for the .activate case which needs to skip active elements. Toggle next generation bit for elements when delete set command is invoked and call nft_clear() from .activate (abort) path to restore the next generation bit. The splat below shows an object in mappings memleak: [43929.457523] ------------[ cut here ]------------ [43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [...] [43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 <0f> 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 [43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246 [43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000 [43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550 [43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f [43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0 [43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002 [43929.458103] FS: 00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [43929.458107] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0 [43929.458114] Call Trace: [43929.458118] <TASK> [43929.458121] ? __warn+0x9f/0x1a0 [43929.458127] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458188] ? report_bug+0x1b1/0x1e0 [43929.458196] ? handle_bug+0x3c/0x70 [43929.458200] ? exc_invalid_op+0x17/0x40 [43929.458211] ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables] [43929.458271] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458332] nft_mapelem_deactivate+0x24/0x30 [nf_tables] [43929.458392] nft_rhash_walk+0xdd/0x180 [nf_tables] [43929.458453] ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables] [43929.458512] ? rb_insert_color+0x2e/0x280 [43929.458520] nft_map_deactivate+0xdc/0x1e0 [nf_tables] [43929.458582] ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables] [43929.458642] ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables] [43929.458701] ? __rcu_read_unlock+0x46/0x70 [43929.458709] nft_delset+0xff/0x110 [nf_tables] [43929.458769] nft_flush_table+0x16f/0x460 [nf_tables] [43929.458830] nf_tables_deltable+0x501/0x580 [nf_tables] |
| CVE-2024-27011 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix memleak in map from abort path The delete set command does not rely on the transaction object for element removal, therefore, a combination of delete element + delete set from the abort path could result in restoring twice the refcount of the mapping. Check for inactive element in the next generation for the delete element command in the abort path, skip restoring state if next generation bit has been already cleared. This is similar to the activate logic using the set walk iterator. [ 6170.286929] ------------[ cut here ]------------ [ 6170.286939] WARNING: CPU: 6 PID: 790302 at net/netfilter/nf_tables_api.c:2086 nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.287071] Modules linked in: [...] [ 6170.287633] CPU: 6 PID: 790302 Comm: kworker/6:2 Not tainted 6.9.0-rc3+ #365 [ 6170.287768] RIP: 0010:nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.287886] Code: df 48 8d 7d 58 e8 69 2e 3b df 48 8b 7d 58 e8 80 1b 37 df 48 8d 7d 68 e8 57 2e 3b df 48 8b 7d 68 e8 6e 1b 37 df 48 89 ef eb c4 <0f> 0b 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 0f [ 6170.287895] RSP: 0018:ffff888134b8fd08 EFLAGS: 00010202 [ 6170.287904] RAX: 0000000000000001 RBX: ffff888125bffb28 RCX: dffffc0000000000 [ 6170.287912] RDX: 0000000000000003 RSI: ffffffffa20298ab RDI: ffff88811ebe4750 [ 6170.287919] RBP: ffff88811ebe4700 R08: ffff88838e812650 R09: fffffbfff0623a55 [ 6170.287926] R10: ffffffff8311d2af R11: 0000000000000001 R12: ffff888125bffb10 [ 6170.287933] R13: ffff888125bffb10 R14: dead000000000122 R15: dead000000000100 [ 6170.287940] FS: 0000000000000000(0000) GS:ffff888390b00000(0000) knlGS:0000000000000000 [ 6170.287948] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6170.287955] CR2: 00007fd31fc00710 CR3: 0000000133f60004 CR4: 00000000001706f0 [ 6170.287962] Call Trace: [ 6170.287967] <TASK> [ 6170.287973] ? __warn+0x9f/0x1a0 [ 6170.287986] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288092] ? report_bug+0x1b1/0x1e0 [ 6170.287986] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288092] ? report_bug+0x1b1/0x1e0 [ 6170.288104] ? handle_bug+0x3c/0x70 [ 6170.288112] ? exc_invalid_op+0x17/0x40 [ 6170.288120] ? asm_exc_invalid_op+0x1a/0x20 [ 6170.288132] ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables] [ 6170.288243] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288366] ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables] [ 6170.288483] nf_tables_trans_destroy_work+0x588/0x590 [nf_tables] |
| CVE-2024-27010 | In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix mirred deadlock on device recursion When the mirred action is used on a classful egress qdisc and a packet is mirrored or redirected to self we hit a qdisc lock deadlock. See trace below. [..... other info removed for brevity....] [ 82.890906] [ 82.890906] ============================================ [ 82.890906] WARNING: possible recursive locking detected [ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W [ 82.890906] -------------------------------------------- [ 82.890906] ping/418 is trying to acquire lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] but task is already holding lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] other info that might help us debug this: [ 82.890906] Possible unsafe locking scenario: [ 82.890906] [ 82.890906] CPU0 [ 82.890906] ---- [ 82.890906] lock(&sch->q.lock); [ 82.890906] lock(&sch->q.lock); [ 82.890906] [ 82.890906] *** DEADLOCK *** [ 82.890906] [..... other info removed for brevity....] Example setup (eth0->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 Another example(eth0->eth1->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth1 tc qdisc add dev eth1 root handle 1: htb default 30 tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 We fix this by adding an owner field (CPU id) to struct Qdisc set after root qdisc is entered. When the softirq enters it a second time, if the qdisc owner is the same CPU, the packet is dropped to break the loop. |
| CVE-2024-27009 | In the Linux kernel, the following vulnerability has been resolved: s390/cio: fix race condition during online processing A race condition exists in ccw_device_set_online() that can cause the online process to fail, leaving the affected device in an inconsistent state. As a result, subsequent attempts to set that device online fail with return code ENODEV. The problem occurs when a path verification request arrives after a wait for final device state completed, but before the result state is evaluated. Fix this by ensuring that the CCW-device lock is held between determining final state and checking result state. Note that since: commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") path verification requests are much more likely to occur during boot, resulting in an increased chance of this race condition occurring. |
| CVE-2024-27008 | In the Linux kernel, the following vulnerability has been resolved: drm: nv04: Fix out of bounds access When Output Resource (dcb->or) value is assigned in fabricate_dcb_output(), there may be out of bounds access to dac_users array in case dcb->or is zero because ffs(dcb->or) is used as index there. The 'or' argument of fabricate_dcb_output() must be interpreted as a number of bit to set, not value. Utilize macros from 'enum nouveau_or' in calls instead of hardcoding. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-27007 | In the Linux kernel, the following vulnerability has been resolved: userfaultfd: change src_folio after ensuring it's unpinned in UFFDIO_MOVE Commit d7a08838ab74 ("mm: userfaultfd: fix unexpected change to src_folio when UFFDIO_MOVE fails") moved the src_folio->{mapping, index} changing to after clearing the page-table and ensuring that it's not pinned. This avoids failure of swapout+migration and possibly memory corruption. However, the commit missed fixing it in the huge-page case. |
| CVE-2024-27006 | In the Linux kernel, the following vulnerability has been resolved: thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up() The count field in struct trip_stats, representing the number of times the zone temperature was above the trip point, needs to be incremented in thermal_debug_tz_trip_up(), for two reasons. First, if a trip point is crossed on the way up for the first time, thermal_debug_update_temp() called from update_temperature() does not see it because it has not been added to trips_crossed[] array in the thermal zone's struct tz_debugfs object yet. Therefore, when thermal_debug_tz_trip_up() is called after that, the trip point's count value is 0, and the attempt to divide by it during the average temperature computation leads to a divide error which causes the kernel to crash. Setting the count to 1 before the division by incrementing it fixes this problem. Second, if a trip point is crossed on the way up, but it has been crossed on the way up already before, its count value needs to be incremented to make a record of the fact that the zone temperature is above the trip now. Without doing that, if the mitigations applied after crossing the trip cause the zone temperature to drop below its threshold, the count will not be updated for this episode at all and the average temperature in the trip statistics record will be somewhat higher than it should be. Cc :6.8+ <[email protected]> # 6.8+ |
| CVE-2024-27005 | In the Linux kernel, the following vulnerability has been resolved: interconnect: Don't access req_list while it's being manipulated The icc_lock mutex was split into separate icc_lock and icc_bw_lock mutexes in [1] to avoid lockdep splats. However, this didn't adequately protect access to icc_node::req_list. The icc_set_bw() function will eventually iterate over req_list while only holding icc_bw_lock, but req_list can be modified while only holding icc_lock. This causes races between icc_set_bw(), of_icc_get(), and icc_put(). Example A: CPU0 CPU1 ---- ---- icc_set_bw(path_a) mutex_lock(&icc_bw_lock); icc_put(path_b) mutex_lock(&icc_lock); aggregate_requests() hlist_for_each_entry(r, ... hlist_del(... <r = invalid pointer> Example B: CPU0 CPU1 ---- ---- icc_set_bw(path_a) mutex_lock(&icc_bw_lock); path_b = of_icc_get() of_icc_get_by_index() mutex_lock(&icc_lock); path_find() path_init() aggregate_requests() hlist_for_each_entry(r, ... hlist_add_head(... <r = invalid pointer> Fix this by ensuring icc_bw_lock is always held before manipulating icc_node::req_list. The additional places icc_bw_lock is held don't perform any memory allocations, so we should still be safe from the original lockdep splats that motivated the separate locks. [1] commit af42269c3523 ("interconnect: Fix locking for runpm vs reclaim") |
| CVE-2024-27004 | In the Linux kernel, the following vulnerability has been resolved: clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be ---truncated--- |
| CVE-2024-27003 | In the Linux kernel, the following vulnerability has been resolved: clk: Get runtime PM before walking tree for clk_summary Similar to the previous commit, we should make sure that all devices are runtime resumed before printing the clk_summary through debugfs. Failure to do so would result in a deadlock if the thread is resuming a device to print clk state and that device is also runtime resuming in another thread, e.g the screen is turning on and the display driver is starting up. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. This also squashes a bug where the return value of clk_pm_runtime_get() wasn't checked, leading to an RPM count underflow on error paths. |
| CVE-2024-27002 | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: Do a runtime PM get on controllers during probe mt8183-mfgcfg has a mutual dependency with genpd during the probing stage, which leads to a deadlock in the following call stack: CPU0: genpd_lock --> clk_prepare_lock genpd_power_off_work_fn() genpd_lock() generic_pm_domain::power_off() clk_unprepare() clk_prepare_lock() CPU1: clk_prepare_lock --> genpd_lock clk_register() __clk_core_init() clk_prepare_lock() clk_pm_runtime_get() genpd_lock() Do a runtime PM get at the probe function to make sure clk_register() won't acquire the genpd lock. Instead of only modifying mt8183-mfgcfg, do this on all mediatek clock controller probings because we don't believe this would cause any regression. Verified on MT8183 and MT8192 Chromebooks. |
| CVE-2024-27001 | In the Linux kernel, the following vulnerability has been resolved: comedi: vmk80xx: fix incomplete endpoint checking While vmk80xx does have endpoint checking implemented, some things can fall through the cracks. Depending on the hardware model, URBs can have either bulk or interrupt type, and current version of vmk80xx_find_usb_endpoints() function does not take that fully into account. While this warning does not seem to be too harmful, at the very least it will crash systems with 'panic_on_warn' set on them. Fix the issue found by Syzkaller [1] by somewhat simplifying the endpoint checking process with usb_find_common_endpoints() and ensuring that only expected endpoint types are present. This patch has not been tested on real hardware. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 781 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> usb_start_wait_urb+0x113/0x520 drivers/usb/core/message.c:59 vmk80xx_reset_device drivers/comedi/drivers/vmk80xx.c:227 [inline] vmk80xx_auto_attach+0xa1c/0x1a40 drivers/comedi/drivers/vmk80xx.c:818 comedi_auto_config+0x238/0x380 drivers/comedi/drivers.c:1067 usb_probe_interface+0x5cd/0xb00 drivers/usb/core/driver.c:399 ... Similar issue also found by Syzkaller: |
| CVE-2024-27000 | In the Linux kernel, the following vulnerability has been resolved: serial: mxs-auart: add spinlock around changing cts state The uart_handle_cts_change() function in serial_core expects the caller to hold uport->lock. For example, I have seen the below kernel splat, when the Bluetooth driver is loaded on an i.MX28 board. [ 85.119255] ------------[ cut here ]------------ [ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec [ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs [ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1 [ 85.151396] Hardware name: Freescale MXS (Device Tree) [ 85.156679] Workqueue: hci0 hci_power_on [bluetooth] (...) [ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4 [ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210 (...) |
| CVE-2024-26999 | In the Linux kernel, the following vulnerability has been resolved: serial/pmac_zilog: Remove flawed mitigation for rx irq flood The mitigation was intended to stop the irq completely. That may be better than a hard lock-up but it turns out that you get a crash anyway if you're using pmac_zilog as a serial console: ttyPZ0: pmz: rx irq flood ! BUG: spinlock recursion on CPU#0, swapper/0 That's because the pr_err() call in pmz_receive_chars() results in pmz_console_write() attempting to lock a spinlock already locked in pmz_interrupt(). With CONFIG_DEBUG_SPINLOCK=y, this produces a fatal BUG splat. The spinlock in question is the one in struct uart_port. Even when it's not fatal, the serial port rx function ceases to work. Also, the iteration limit doesn't play nicely with QEMU, as can be seen in the bug report linked below. A web search for other reports of the error message "pmz: rx irq flood" didn't produce anything. So I don't think this code is needed any more. Remove it. |
| CVE-2024-26998 | In the Linux kernel, the following vulnerability has been resolved: serial: core: Clearing the circular buffer before NULLifying it The circular buffer is NULLified in uart_tty_port_shutdown() under the spin lock. However, the PM or other timer based callbacks may still trigger after this event without knowning that buffer pointer is not valid. Since the serial code is a bit inconsistent in checking the buffer state (some rely on the head-tail positions, some on the buffer pointer), it's better to have both aligned, i.e. buffer pointer to be NULL and head-tail possitions to be the same, meaning it's empty. This will prevent asynchronous calls to dereference NULL pointer as reported recently in 8250 case: BUG: kernel NULL pointer dereference, address: 00000cf5 Workqueue: pm pm_runtime_work EIP: serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) ... ? serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) __start_tx (drivers/tty/serial/8250/8250_port.c:1551) serial8250_start_tx (drivers/tty/serial/8250/8250_port.c:1654) serial_port_runtime_suspend (include/linux/serial_core.h:667 drivers/tty/serial/serial_port.c:63) __rpm_callback (drivers/base/power/runtime.c:393) ? serial_port_remove (drivers/tty/serial/serial_port.c:50) rpm_suspend (drivers/base/power/runtime.c:447) The proposed change will prevent ->start_tx() to be called during suspend on shut down port. |
| CVE-2024-26997 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: host: Fix dereference issue in DDMA completion flow. Fixed variable dereference issue in DDMA completion flow. |
| CVE-2024-26996 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error When ncm function is working and then stop usb0 interface for link down, eth_stop() is called. At this piont, accidentally if usb transport error should happen in usb_ep_enable(), 'in_ep' and/or 'out_ep' may not be enabled. After that, ncm_disable() is called to disable for ncm unbind but gether_disconnect() is never called since 'in_ep' is not enabled. As the result, ncm object is released in ncm unbind but 'dev->port_usb' associated to 'ncm->port' is not NULL. And when ncm bind again to recover netdev, ncm object is reallocated but usb0 interface is already associated to previous released ncm object. Therefore, once usb0 interface is up and eth_start_xmit() is called, released ncm object is dereferrenced and it might cause use-after-free memory. [function unlink via configfs] usb0: eth_stop dev->port_usb=ffffff9b179c3200 --> error happens in usb_ep_enable(). NCM: ncm_disable: ncm=ffffff9b179c3200 --> no gether_disconnect() since ncm->port.in_ep->enabled is false. NCM: ncm_unbind: ncm unbind ncm=ffffff9b179c3200 NCM: ncm_free: ncm free ncm=ffffff9b179c3200 <-- released ncm [function link via configfs] NCM: ncm_alloc: ncm alloc ncm=ffffff9ac4f8a000 NCM: ncm_bind: ncm bind ncm=ffffff9ac4f8a000 NCM: ncm_set_alt: ncm=ffffff9ac4f8a000 alt=0 usb0: eth_open dev->port_usb=ffffff9b179c3200 <-- previous released ncm usb0: eth_start dev->port_usb=ffffff9b179c3200 <-- eth_start_xmit() --> dev->wrap() Unable to handle kernel paging request at virtual address dead00000000014f This patch addresses the issue by checking if 'ncm->netdev' is not NULL at ncm_disable() to call gether_disconnect() to deassociate 'dev->port_usb'. It's more reasonable to check 'ncm->netdev' to call gether_connect/disconnect rather than check 'ncm->port.in_ep->enabled' since it might not be enabled but the gether connection might be established. |
| CVE-2024-26995 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Correct the PDO counting in pd_set Off-by-one errors happen because nr_snk_pdo and nr_src_pdo are incorrectly added one. The index of the loop is equal to the number of PDOs to be updated when leaving the loop and it doesn't need to be added one. When doing the power negotiation, TCPM relies on the "nr_snk_pdo" as the size of the local sink PDO array to match the Source capabilities of the partner port. If the off-by-one overflow occurs, a wrong RDO might be sent and unexpected power transfer might happen such as over voltage or over current (than expected). "nr_src_pdo" is used to set the Rp level when the port is in Source role. It is also the array size of the local Source capabilities when filling up the buffer which will be sent as the Source PDOs (such as in Power Negotiation). If the off-by-one overflow occurs, a wrong Rp level might be set and wrong Source PDOs will be sent to the partner port. This could potentially cause over current or port resets. |
| CVE-2024-26994 | In the Linux kernel, the following vulnerability has been resolved: speakup: Avoid crash on very long word In case a console is set up really large and contains a really long word (> 256 characters), we have to stop before the length of the word buffer. |
| CVE-2024-26993 | In the Linux kernel, the following vulnerability has been resolved: fs: sysfs: Fix reference leak in sysfs_break_active_protection() The sysfs_break_active_protection() routine has an obvious reference leak in its error path. If the call to kernfs_find_and_get() fails then kn will be NULL, so the companion sysfs_unbreak_active_protection() routine won't get called (and would only cause an access violation by trying to dereference kn->parent if it was called). As a result, the reference to kobj acquired at the start of the function will never be released. Fix the leak by adding an explicit kobject_put() call when kn is NULL. |
| CVE-2024-26992 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86/pmu: Disable support for adaptive PEBS Drop support for virtualizing adaptive PEBS, as KVM's implementation is architecturally broken without an obvious/easy path forward, and because exposing adaptive PEBS can leak host LBRs to the guest, i.e. can leak host kernel addresses to the guest. Bug #1 is that KVM doesn't account for the upper 32 bits of IA32_FIXED_CTR_CTRL when (re)programming fixed counters, e.g fixed_ctrl_field() drops the upper bits, reprogram_fixed_counters() stores local variables as u8s and truncates the upper bits too, etc. Bug #2 is that, because KVM _always_ sets precise_ip to a non-zero value for PEBS events, perf will _always_ generate an adaptive record, even if the guest requested a basic record. Note, KVM will also enable adaptive PEBS in individual *counter*, even if adaptive PEBS isn't exposed to the guest, but this is benign as MSR_PEBS_DATA_CFG is guaranteed to be zero, i.e. the guest will only ever see Basic records. Bug #3 is in perf. intel_pmu_disable_fixed() doesn't clear the upper bits either, i.e. leaves ICL_FIXED_0_ADAPTIVE set, and intel_pmu_enable_fixed() effectively doesn't clear ICL_FIXED_0_ADAPTIVE either. I.e. perf _always_ enables ADAPTIVE counters, regardless of what KVM requests. Bug #4 is that adaptive PEBS *might* effectively bypass event filters set by the host, as "Updated Memory Access Info Group" records information that might be disallowed by userspace via KVM_SET_PMU_EVENT_FILTER. Bug #5 is that KVM doesn't ensure LBR MSRs hold guest values (or at least zeros) when entering a vCPU with adaptive PEBS, which allows the guest to read host LBRs, i.e. host RIPs/addresses, by enabling "LBR Entries" records. Disable adaptive PEBS support as an immediate fix due to the severity of the LBR leak in particular, and because fixing all of the bugs will be non-trivial, e.g. not suitable for backporting to stable kernels. Note! This will break live migration, but trying to make KVM play nice with live migration would be quite complicated, wouldn't be guaranteed to work (i.e. KVM might still kill/confuse the guest), and it's not clear that there are any publicly available VMMs that support adaptive PEBS, let alone live migrate VMs that support adaptive PEBS, e.g. QEMU doesn't support PEBS in any capacity. |
| CVE-2024-26991 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: x86: Don't overflow lpage_info when checking attributes Fix KVM_SET_MEMORY_ATTRIBUTES to not overflow lpage_info array and trigger KASAN splat, as seen in the private_mem_conversions_test selftest. When memory attributes are set on a GFN range, that range will have specific properties applied to the TDP. A huge page cannot be used when the attributes are inconsistent, so they are disabled for those the specific huge pages. For internal KVM reasons, huge pages are also not allowed to span adjacent memslots regardless of whether the backing memory could be mapped as huge. What GFNs support which huge page sizes is tracked by an array of arrays 'lpage_info' on the memslot, of ‘kvm_lpage_info’ structs. Each index of lpage_info contains a vmalloc allocated array of these for a specific supported page size. The kvm_lpage_info denotes whether a specific huge page (GFN and page size) on the memslot is supported. These arrays include indices for unaligned head and tail huge pages. Preventing huge pages from spanning adjacent memslot is covered by incrementing the count in head and tail kvm_lpage_info when the memslot is allocated, but disallowing huge pages for memory that has mixed attributes has to be done in a more complicated way. During the KVM_SET_MEMORY_ATTRIBUTES ioctl KVM updates lpage_info for each memslot in the range that has mismatched attributes. KVM does this a memslot at a time, and marks a special bit, KVM_LPAGE_MIXED_FLAG, in the kvm_lpage_info for any huge page. This bit is essentially a permanently elevated count. So huge pages will not be mapped for the GFN at that page size if the count is elevated in either case: a huge head or tail page unaligned to the memslot or if KVM_LPAGE_MIXED_FLAG is set because it has mixed attributes. To determine whether a huge page has consistent attributes, the KVM_SET_MEMORY_ATTRIBUTES operation checks an xarray to make sure it consistently has the incoming attribute. Since level - 1 huge pages are aligned to level huge pages, it employs an optimization. As long as the level - 1 huge pages are checked first, it can just check these and assume that if each level - 1 huge page contained within the level sized huge page is not mixed, then the level size huge page is not mixed. This optimization happens in the helper hugepage_has_attrs(). Unfortunately, although the kvm_lpage_info array representing page size 'level' will contain an entry for an unaligned tail page of size level, the array for level - 1 will not contain an entry for each GFN at page size level. The level - 1 array will only contain an index for any unaligned region covered by level - 1 huge page size, which can be a smaller region. So this causes the optimization to overflow the level - 1 kvm_lpage_info and perform a vmalloc out of bounds read. In some cases of head and tail pages where an overflow could happen, callers skip the operation completely as KVM_LPAGE_MIXED_FLAG is not required to prevent huge pages as discussed earlier. But for memslots that are smaller than the 1GB page size, it does call hugepage_has_attrs(). In this case the huge page is both the head and tail page. The issue can be observed simply by compiling the kernel with CONFIG_KASAN_VMALLOC and running the selftest “private_mem_conversions_test”, which produces the output like the following: BUG: KASAN: vmalloc-out-of-bounds in hugepage_has_attrs+0x7e/0x110 Read of size 4 at addr ffffc900000a3008 by task private_mem_con/169 Call Trace: dump_stack_lvl print_report ? __virt_addr_valid ? hugepage_has_attrs ? hugepage_has_attrs kasan_report ? hugepage_has_attrs hugepage_has_attrs kvm_arch_post_set_memory_attributes kvm_vm_ioctl It is a little ambiguous whether the unaligned head page (in the bug case also the tail page) should be expected to have KVM_LPAGE_MIXED_FLAG set. It is not functionally required, as the unal ---truncated--- |
| CVE-2024-26990 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status Check kvm_mmu_page_ad_need_write_protect() when deciding whether to write-protect or clear D-bits on TDP MMU SPTEs, so that the TDP MMU accounts for any role-specific reasons for disabling D-bit dirty logging. Specifically, TDP MMU SPTEs must be write-protected when the TDP MMU is being used to run an L2 (i.e. L1 has disabled EPT) and PML is enabled. KVM always disables PML when running L2, even when L1 and L2 GPAs are in the some domain, so failing to write-protect TDP MMU SPTEs will cause writes made by L2 to not be reflected in the dirty log. [sean: massage shortlog and changelog, tweak ternary op formatting] |
| CVE-2024-26989 | In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: Fix level3 translation fault in swsusp_save() On arm64 machines, swsusp_save() faults if it attempts to access MEMBLOCK_NOMAP memory ranges. This can be reproduced in QEMU using UEFI when booting with rodata=off debug_pagealloc=off and CONFIG_KFENCE=n: Unable to handle kernel paging request at virtual address ffffff8000000000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000eeb0b000 [ffffff8000000000] pgd=180000217fff9803, p4d=180000217fff9803, pud=180000217fff9803, pmd=180000217fff8803, pte=0000000000000000 Internal error: Oops: 0000000096000007 [#1] SMP Internal error: Oops: 0000000096000007 [#1] SMP Modules linked in: xt_multiport ipt_REJECT nf_reject_ipv4 xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_filter bpfilter rfkill at803x snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg dwmac_generic stmmac_platform snd_hda_codec stmmac joydev pcs_xpcs snd_hda_core phylink ppdev lp parport ramoops reed_solomon ip_tables x_tables nls_iso8859_1 vfat multipath linear amdgpu amdxcp drm_exec gpu_sched drm_buddy hid_generic usbhid hid radeon video drm_suballoc_helper drm_ttm_helper ttm i2c_algo_bit drm_display_helper cec drm_kms_helper drm CPU: 0 PID: 3663 Comm: systemd-sleep Not tainted 6.6.2+ #76 Source Version: 4e22ed63a0a48e7a7cff9b98b7806d8d4add7dc0 Hardware name: Greatwall GW-XXXXXX-XXX/GW-XXXXXX-XXX, BIOS KunLun BIOS V4.0 01/19/2021 pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : swsusp_save+0x280/0x538 lr : swsusp_save+0x280/0x538 sp : ffffffa034a3fa40 x29: ffffffa034a3fa40 x28: ffffff8000001000 x27: 0000000000000000 x26: ffffff8001400000 x25: ffffffc08113e248 x24: 0000000000000000 x23: 0000000000080000 x22: ffffffc08113e280 x21: 00000000000c69f2 x20: ffffff8000000000 x19: ffffffc081ae2500 x18: 0000000000000000 x17: 6666662074736420 x16: 3030303030303030 x15: 3038666666666666 x14: 0000000000000b69 x13: ffffff9f89088530 x12: 00000000ffffffea x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffffc08193f0d0 x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 0000000000000001 x5 : ffffffa0fff09dc8 x4 : 0000000000000000 x3 : 0000000000000027 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 000000000000004e Call trace: swsusp_save+0x280/0x538 swsusp_arch_suspend+0x148/0x190 hibernation_snapshot+0x240/0x39c hibernate+0xc4/0x378 state_store+0xf0/0x10c kobj_attr_store+0x14/0x24 The reason is swsusp_save() -> copy_data_pages() -> page_is_saveable() -> kernel_page_present() assuming that a page is always present when can_set_direct_map() is false (all of rodata_full, debug_pagealloc_enabled() and arm64_kfence_can_set_direct_map() false), irrespective of the MEMBLOCK_NOMAP ranges. Such MEMBLOCK_NOMAP regions should not be saved during hibernation. This problem was introduced by changes to the pfn_valid() logic in commit a7d9f306ba70 ("arm64: drop pfn_valid_within() and simplify pfn_valid()"). Similar to other architectures, drop the !can_set_direct_map() check in kernel_page_present() so that page_is_savable() skips such pages. [[email protected]: rework commit message] |
| CVE-2024-26988 | In the Linux kernel, the following vulnerability has been resolved: init/main.c: Fix potential static_command_line memory overflow We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for static_command_line, but the strings copied into static_command_line are extra_command_line and command_line, rather than extra_command_line and boot_command_line. When strlen(command_line) > strlen(boot_command_line), static_command_line will overflow. This patch just recovers strlen(command_line) which was miss-consolidated with strlen(boot_command_line) in the commit f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()") |
| CVE-2024-26987 | In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled When I did hard offline test with hugetlb pages, below deadlock occurs: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-11409-gf6cef5f8c37f #1 Not tainted ------------------------------------------------------ bash/46904 is trying to acquire lock: ffffffffabe68910 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_slow_dec+0x16/0x60 but task is already holding lock: ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (pcp_batch_high_lock){+.+.}-{3:3}: __mutex_lock+0x6c/0x770 page_alloc_cpu_online+0x3c/0x70 cpuhp_invoke_callback+0x397/0x5f0 __cpuhp_invoke_callback_range+0x71/0xe0 _cpu_up+0xeb/0x210 cpu_up+0x91/0xe0 cpuhp_bringup_mask+0x49/0xb0 bringup_nonboot_cpus+0xb7/0xe0 smp_init+0x25/0xa0 kernel_init_freeable+0x15f/0x3e0 kernel_init+0x15/0x1b0 ret_from_fork+0x2f/0x50 ret_from_fork_asm+0x1a/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1298/0x1cd0 lock_acquire+0xc0/0x2b0 cpus_read_lock+0x2a/0xc0 static_key_slow_dec+0x16/0x60 __hugetlb_vmemmap_restore_folio+0x1b9/0x200 dissolve_free_huge_page+0x211/0x260 __page_handle_poison+0x45/0xc0 memory_failure+0x65e/0xc70 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x387/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xca/0x1e0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(pcp_batch_high_lock); lock(cpu_hotplug_lock); lock(pcp_batch_high_lock); rlock(cpu_hotplug_lock); *** DEADLOCK *** 5 locks held by bash/46904: #0: ffff98f6c3bb23f0 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x64/0xe0 #1: ffff98f6c328e488 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf8/0x1d0 #2: ffff98ef83b31890 (kn->active#113){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x100/0x1d0 #3: ffffffffabf9db48 (mf_mutex){+.+.}-{3:3}, at: memory_failure+0x44/0xc70 #4: ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40 stack backtrace: CPU: 10 PID: 46904 Comm: bash Kdump: loaded Not tainted 6.8.0-11409-gf6cef5f8c37f #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 check_noncircular+0x129/0x140 __lock_acquire+0x1298/0x1cd0 lock_acquire+0xc0/0x2b0 cpus_read_lock+0x2a/0xc0 static_key_slow_dec+0x16/0x60 __hugetlb_vmemmap_restore_folio+0x1b9/0x200 dissolve_free_huge_page+0x211/0x260 __page_handle_poison+0x45/0xc0 memory_failure+0x65e/0xc70 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x387/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xca/0x1e0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7fc862314887 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007fff19311268 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007fc862314887 RDX: 000000000000000c RSI: 000056405645fe10 RDI: 0000000000000001 RBP: 000056405645fe10 R08: 00007fc8623d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007fc86241b780 R14: 00007fc862417600 R15: 00007fc862416a00 In short, below scene breaks the ---truncated--- |
| CVE-2024-26986 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix memory leak in create_process failure Fix memory leak due to a leaked mmget reference on an error handling code path that is triggered when attempting to create KFD processes while a GPU reset is in progress. |
| CVE-2024-26985 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix bo leak in intel_fb_bo_framebuffer_init Add a unreference bo in the error path, to prevent leaking a bo ref. Return 0 on success to clarify the success path. (cherry picked from commit a2f3d731be3893e730417ae3190760fcaffdf549) |
| CVE-2024-26984 | In the Linux kernel, the following vulnerability has been resolved: nouveau: fix instmem race condition around ptr stores Running a lot of VK CTS in parallel against nouveau, once every few hours you might see something like this crash. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1 RSP: 0000:ffffac20c5857838 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001 RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180 RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10 R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c FS: 00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ... ? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] ? gp100_vmm_pgt_mem+0x37/0x180 [nouveau] nvkm_vmm_iter+0x351/0xa20 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __lock_acquire+0x3ed/0x2170 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_map_locked+0x224/0x3a0 [nouveau] Adding any sort of useful debug usually makes it go away, so I hand wrote the function in a line, and debugged the asm. Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in the nv50_instobj_acquire called from nvkm_kmap. If Thread A and Thread B both get to nv50_instobj_acquire around the same time, and Thread A hits the refcount_set line, and in lockstep thread B succeeds at refcount_inc_not_zero, there is a chance the ptrs value won't have been stored since refcount_set is unordered. Force a memory barrier here, I picked smp_mb, since we want it on all CPUs and it's write followed by a read. v2: use paired smp_rmb/smp_wmb. |
| CVE-2024-26983 | In the Linux kernel, the following vulnerability has been resolved: bootconfig: use memblock_free_late to free xbc memory to buddy On the time to free xbc memory in xbc_exit(), memblock may has handed over memory to buddy allocator. So it doesn't make sense to free memory back to memblock. memblock_free() called by xbc_exit() even causes UAF bugs on architectures with CONFIG_ARCH_KEEP_MEMBLOCK disabled like x86. Following KASAN logs shows this case. This patch fixes the xbc memory free problem by calling memblock_free() in early xbc init error rewind path and calling memblock_free_late() in xbc exit path to free memory to buddy allocator. [ 9.410890] ================================================================== [ 9.418962] BUG: KASAN: use-after-free in memblock_isolate_range+0x12d/0x260 [ 9.426850] Read of size 8 at addr ffff88845dd30000 by task swapper/0/1 [ 9.435901] CPU: 9 PID: 1 Comm: swapper/0 Tainted: G U 6.9.0-rc3-00208-g586b5dfb51b9 #5 [ 9.446403] Hardware name: Intel Corporation RPLP LP5 (CPU:RaptorLake)/RPLP LP5 (ID:13), BIOS IRPPN02.01.01.00.00.19.015.D-00000000 Dec 28 2023 [ 9.460789] Call Trace: [ 9.463518] <TASK> [ 9.465859] dump_stack_lvl+0x53/0x70 [ 9.469949] print_report+0xce/0x610 [ 9.473944] ? __virt_addr_valid+0xf5/0x1b0 [ 9.478619] ? memblock_isolate_range+0x12d/0x260 [ 9.483877] kasan_report+0xc6/0x100 [ 9.487870] ? memblock_isolate_range+0x12d/0x260 [ 9.493125] memblock_isolate_range+0x12d/0x260 [ 9.498187] memblock_phys_free+0xb4/0x160 [ 9.502762] ? __pfx_memblock_phys_free+0x10/0x10 [ 9.508021] ? mutex_unlock+0x7e/0xd0 [ 9.512111] ? __pfx_mutex_unlock+0x10/0x10 [ 9.516786] ? kernel_init_freeable+0x2d4/0x430 [ 9.521850] ? __pfx_kernel_init+0x10/0x10 [ 9.526426] xbc_exit+0x17/0x70 [ 9.529935] kernel_init+0x38/0x1e0 [ 9.533829] ? _raw_spin_unlock_irq+0xd/0x30 [ 9.538601] ret_from_fork+0x2c/0x50 [ 9.542596] ? __pfx_kernel_init+0x10/0x10 [ 9.547170] ret_from_fork_asm+0x1a/0x30 [ 9.551552] </TASK> [ 9.555649] The buggy address belongs to the physical page: [ 9.561875] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x45dd30 [ 9.570821] flags: 0x200000000000000(node=0|zone=2) [ 9.576271] page_type: 0xffffffff() [ 9.580167] raw: 0200000000000000 ffffea0011774c48 ffffea0012ba1848 0000000000000000 [ 9.588823] raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 [ 9.597476] page dumped because: kasan: bad access detected [ 9.605362] Memory state around the buggy address: [ 9.610714] ffff88845dd2ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 9.618786] ffff88845dd2ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 9.626857] >ffff88845dd30000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.634930] ^ [ 9.638534] ffff88845dd30080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.646605] ffff88845dd30100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.654675] ================================================================== |
| CVE-2024-26982 | In the Linux kernel, the following vulnerability has been resolved: Squashfs: check the inode number is not the invalid value of zero Syskiller has produced an out of bounds access in fill_meta_index(). That out of bounds access is ultimately caused because the inode has an inode number with the invalid value of zero, which was not checked. The reason this causes the out of bounds access is due to following sequence of events: 1. Fill_meta_index() is called to allocate (via empty_meta_index()) and fill a metadata index. It however suffers a data read error and aborts, invalidating the newly returned empty metadata index. It does this by setting the inode number of the index to zero, which means unused (zero is not a valid inode number). 2. When fill_meta_index() is subsequently called again on another read operation, locate_meta_index() returns the previous index because it matches the inode number of 0. Because this index has been returned it is expected to have been filled, and because it hasn't been, an out of bounds access is performed. This patch adds a sanity check which checks that the inode number is not zero when the inode is created and returns -EINVAL if it is. [[email protected]: whitespace fix] Link: https://lkml.kernel.org/r/[email protected] |
| CVE-2024-26981 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix OOB in nilfs_set_de_type The size of the nilfs_type_by_mode array in the fs/nilfs2/dir.c file is defined as "S_IFMT >> S_SHIFT", but the nilfs_set_de_type() function, which uses this array, specifies the index to read from the array in the same way as "(mode & S_IFMT) >> S_SHIFT". static void nilfs_set_de_type(struct nilfs_dir_entry *de, struct inode *inode) { umode_t mode = inode->i_mode; de->file_type = nilfs_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; // oob } However, when the index is determined this way, an out-of-bounds (OOB) error occurs by referring to an index that is 1 larger than the array size when the condition "mode & S_IFMT == S_IFMT" is satisfied. Therefore, a patch to resize the nilfs_type_by_mode array should be applied to prevent OOB errors. |
| CVE-2024-26980 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf If ->ProtocolId is SMB2_TRANSFORM_PROTO_NUM, smb2 request size validation could be skipped. if request size is smaller than sizeof(struct smb2_query_info_req), slab-out-of-bounds read can happen in smb2_allocate_rsp_buf(). This patch allocate response buffer after decrypting transform request. smb3_decrypt_req() will validate transform request size and avoid slab-out-of-bound in smb2_allocate_rsp_buf(). |
| CVE-2024-26978 | In the Linux kernel, the following vulnerability has been resolved: serial: max310x: fix NULL pointer dereference in I2C instantiation When trying to instantiate a max14830 device from userspace: echo max14830 0x60 > /sys/bus/i2c/devices/i2c-2/new_device we get the following error: Unable to handle kernel NULL pointer dereference at virtual address... ... Call trace: max310x_i2c_probe+0x48/0x170 [max310x] i2c_device_probe+0x150/0x2a0 ... Add check for validity of devtype to prevent the error, and abort probe with a meaningful error message. |
| CVE-2024-26977 | In the Linux kernel, the following vulnerability has been resolved: pci_iounmap(): Fix MMIO mapping leak The #ifdef ARCH_HAS_GENERIC_IOPORT_MAP accidentally also guards iounmap(), which means MMIO mappings are leaked. Move the guard so we call iounmap() for MMIO mappings. |
| CVE-2024-26976 | In the Linux kernel, the following vulnerability has been resolved: KVM: Always flush async #PF workqueue when vCPU is being destroyed Always flush the per-vCPU async #PF workqueue when a vCPU is clearing its completion queue, e.g. when a VM and all its vCPUs is being destroyed. KVM must ensure that none of its workqueue callbacks is running when the last reference to the KVM _module_ is put. Gifting a reference to the associated VM prevents the workqueue callback from dereferencing freed vCPU/VM memory, but does not prevent the KVM module from being unloaded before the callback completes. Drop the misguided VM refcount gifting, as calling kvm_put_kvm() from async_pf_execute() if kvm_put_kvm() flushes the async #PF workqueue will result in deadlock. async_pf_execute() can't return until kvm_put_kvm() finishes, and kvm_put_kvm() can't return until async_pf_execute() finishes: WARNING: CPU: 8 PID: 251 at virt/kvm/kvm_main.c:1435 kvm_put_kvm+0x2d/0x320 [kvm] Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel kvm irqbypass CPU: 8 PID: 251 Comm: kworker/8:1 Tainted: G W 6.6.0-rc1-e7af8d17224a-x86/gmem-vm #119 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: events async_pf_execute [kvm] RIP: 0010:kvm_put_kvm+0x2d/0x320 [kvm] Call Trace: <TASK> async_pf_execute+0x198/0x260 [kvm] process_one_work+0x145/0x2d0 worker_thread+0x27e/0x3a0 kthread+0xba/0xe0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 </TASK> ---[ end trace 0000000000000000 ]--- INFO: task kworker/8:1:251 blocked for more than 120 seconds. Tainted: G W 6.6.0-rc1-e7af8d17224a-x86/gmem-vm #119 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/8:1 state:D stack:0 pid:251 ppid:2 flags:0x00004000 Workqueue: events async_pf_execute [kvm] Call Trace: <TASK> __schedule+0x33f/0xa40 schedule+0x53/0xc0 schedule_timeout+0x12a/0x140 __wait_for_common+0x8d/0x1d0 __flush_work.isra.0+0x19f/0x2c0 kvm_clear_async_pf_completion_queue+0x129/0x190 [kvm] kvm_arch_destroy_vm+0x78/0x1b0 [kvm] kvm_put_kvm+0x1c1/0x320 [kvm] async_pf_execute+0x198/0x260 [kvm] process_one_work+0x145/0x2d0 worker_thread+0x27e/0x3a0 kthread+0xba/0xe0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 </TASK> If kvm_clear_async_pf_completion_queue() actually flushes the workqueue, then there's no need to gift async_pf_execute() a reference because all invocations of async_pf_execute() will be forced to complete before the vCPU and its VM are destroyed/freed. And that in turn fixes the module unloading bug as __fput() won't do module_put() on the last vCPU reference until the vCPU has been freed, e.g. if closing the vCPU file also puts the last reference to the KVM module. Note that kvm_check_async_pf_completion() may also take the work item off the completion queue and so also needs to flush the work queue, as the work will not be seen by kvm_clear_async_pf_completion_queue(). Waiting on the workqueue could theoretically delay a vCPU due to waiting for the work to complete, but that's a very, very small chance, and likely a very small delay. kvm_arch_async_page_present_queued() unconditionally makes a new request, i.e. will effectively delay entering the guest, so the remaining work is really just: trace_kvm_async_pf_completed(addr, cr2_or_gpa); __kvm_vcpu_wake_up(vcpu); mmput(mm); and mmput() can't drop the last reference to the page tables if the vCPU is still alive, i.e. the vCPU won't get stuck tearing down page tables. Add a helper to do the flushing, specifically to deal with "wakeup all" work items, as they aren't actually work items, i.e. are never placed in a workqueue. Trying to flush a bogus workqueue entry rightly makes __flush_work() complain (kudos to whoever added that sanity check). Note, commit 5f6de5cbebee ("KVM: Prevent module exit until al ---truncated--- |
| CVE-2024-26975 | In the Linux kernel, the following vulnerability has been resolved: powercap: intel_rapl: Fix a NULL pointer dereference A NULL pointer dereference is triggered when probing the MMIO RAPL driver on platforms with CPU ID not listed in intel_rapl_common CPU model list. This is because the intel_rapl_common module still probes on such platforms even if 'defaults_msr' is not set after commit 1488ac990ac8 ("powercap: intel_rapl: Allow probing without CPUID match"). Thus the MMIO RAPL rp->priv->defaults is NULL when registering to RAPL framework. Fix the problem by adding sanity check to ensure rp->priv->rapl_defaults is always valid. |
| CVE-2024-26974 | In the Linux kernel, the following vulnerability has been resolved: crypto: qat - resolve race condition during AER recovery During the PCI AER system's error recovery process, the kernel driver may encounter a race condition with freeing the reset_data structure's memory. If the device restart will take more than 10 seconds the function scheduling that restart will exit due to a timeout, and the reset_data structure will be freed. However, this data structure is used for completion notification after the restart is completed, which leads to a UAF bug. This results in a KFENCE bug notice. BUG: KFENCE: use-after-free read in adf_device_reset_worker+0x38/0xa0 [intel_qat] Use-after-free read at 0x00000000bc56fddf (in kfence-#142): adf_device_reset_worker+0x38/0xa0 [intel_qat] process_one_work+0x173/0x340 To resolve this race condition, the memory associated to the container of the work_struct is freed on the worker if the timeout expired, otherwise on the function that schedules the worker. The timeout detection can be done by checking if the caller is still waiting for completion or not by using completion_done() function. |
| CVE-2024-26973 | In the Linux kernel, the following vulnerability has been resolved: fat: fix uninitialized field in nostale filehandles When fat_encode_fh_nostale() encodes file handle without a parent it stores only first 10 bytes of the file handle. However the length of the file handle must be a multiple of 4 so the file handle is actually 12 bytes long and the last two bytes remain uninitialized. This is not great at we potentially leak uninitialized information with the handle to userspace. Properly initialize the full handle length. |
| CVE-2024-26972 | In the Linux kernel, the following vulnerability has been resolved: ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path For error handling path in ubifs_symlink(), inode will be marked as bad first, then iput() is invoked. If inode->i_link is initialized by fscrypt_encrypt_symlink() in encryption scenario, inode->i_link won't be freed by callchain ubifs_free_inode -> fscrypt_free_inode in error handling path, because make_bad_inode() has changed 'inode->i_mode' as 'S_IFREG'. Following kmemleak is easy to be reproduced by injecting error in ubifs_jnl_update() when doing symlink in encryption scenario: unreferenced object 0xffff888103da3d98 (size 8): comm "ln", pid 1692, jiffies 4294914701 (age 12.045s) backtrace: kmemdup+0x32/0x70 __fscrypt_encrypt_symlink+0xed/0x1c0 ubifs_symlink+0x210/0x300 [ubifs] vfs_symlink+0x216/0x360 do_symlinkat+0x11a/0x190 do_syscall_64+0x3b/0xe0 There are two ways fixing it: 1. Remove make_bad_inode() in error handling path. We can do that because ubifs_evict_inode() will do same processes for good symlink inode and bad symlink inode, for inode->i_nlink checking is before is_bad_inode(). 2. Free inode->i_link before marking inode bad. Method 2 is picked, it has less influence, personally, I think. |
| CVE-2024-26971 | In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). |
| CVE-2024-26970 | In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. |
| CVE-2024-26969 | In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. |
| CVE-2024-26968 | In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. |
| CVE-2024-26967 | In the Linux kernel, the following vulnerability has been resolved: clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. |
| CVE-2024-26966 | In the Linux kernel, the following vulnerability has been resolved: clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. |
| CVE-2024-26965 | In the Linux kernel, the following vulnerability has been resolved: clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. |
| CVE-2024-26964 | In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Add error handling in xhci_map_urb_for_dma Currently xhci_map_urb_for_dma() creates a temporary buffer and copies the SG list to the new linear buffer. But if the kzalloc_node() fails, then the following sg_pcopy_to_buffer() can lead to crash since it tries to memcpy to NULL pointer. So return -ENOMEM if kzalloc returns null pointer. |
| CVE-2024-26963 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3-am62: fix module unload/reload behavior As runtime PM is enabled, the module can be runtime suspended when .remove() is called. Do a pm_runtime_get_sync() to make sure module is active before doing any register operations. Doing a pm_runtime_put_sync() should disable the refclk so no need to disable it again. Fixes the below warning at module removel. [ 39.705310] ------------[ cut here ]------------ [ 39.710004] clk:162:3 already disabled [ 39.713941] WARNING: CPU: 0 PID: 921 at drivers/clk/clk.c:1090 clk_core_disable+0xb0/0xb8 We called of_platform_populate() in .probe() so call the cleanup function of_platform_depopulate() in .remove(). Get rid of the now unnnecessary dwc3_ti_remove_core(). Without this, module re-load doesn't work properly. |
| CVE-2024-26962 | In the Linux kernel, the following vulnerability has been resolved: dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape For raid456, if reshape is still in progress, then IO across reshape position will wait for reshape to make progress. However, for dm-raid, in following cases reshape will never make progress hence IO will hang: 1) the array is read-only; 2) MD_RECOVERY_WAIT is set; 3) MD_RECOVERY_FROZEN is set; After commit c467e97f079f ("md/raid6: use valid sector values to determine if an I/O should wait on the reshape") fix the problem that IO across reshape position doesn't wait for reshape, the dm-raid test shell/lvconvert-raid-reshape.sh start to hang: [root@fedora ~]# cat /proc/979/stack [<0>] wait_woken+0x7d/0x90 [<0>] raid5_make_request+0x929/0x1d70 [raid456] [<0>] md_handle_request+0xc2/0x3b0 [md_mod] [<0>] raid_map+0x2c/0x50 [dm_raid] [<0>] __map_bio+0x251/0x380 [dm_mod] [<0>] dm_submit_bio+0x1f0/0x760 [dm_mod] [<0>] __submit_bio+0xc2/0x1c0 [<0>] submit_bio_noacct_nocheck+0x17f/0x450 [<0>] submit_bio_noacct+0x2bc/0x780 [<0>] submit_bio+0x70/0xc0 [<0>] mpage_readahead+0x169/0x1f0 [<0>] blkdev_readahead+0x18/0x30 [<0>] read_pages+0x7c/0x3b0 [<0>] page_cache_ra_unbounded+0x1ab/0x280 [<0>] force_page_cache_ra+0x9e/0x130 [<0>] page_cache_sync_ra+0x3b/0x110 [<0>] filemap_get_pages+0x143/0xa30 [<0>] filemap_read+0xdc/0x4b0 [<0>] blkdev_read_iter+0x75/0x200 [<0>] vfs_read+0x272/0x460 [<0>] ksys_read+0x7a/0x170 [<0>] __x64_sys_read+0x1c/0x30 [<0>] do_syscall_64+0xc6/0x230 [<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 This is because reshape can't make progress. For md/raid, the problem doesn't exist because register new sync_thread doesn't rely on the IO to be done any more: 1) If array is read-only, it can switch to read-write by ioctl/sysfs; 2) md/raid never set MD_RECOVERY_WAIT; 3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold 'reconfig_mutex', hence it can be cleared and reshape can continue by sysfs api 'sync_action'. However, I'm not sure yet how to avoid the problem in dm-raid yet. This patch on the one hand make sure raid_message() can't change sync_thread() through raid_message() after presuspend(), on the other hand detect the above 3 cases before wait for IO do be done in dm_suspend(), and let dm-raid requeue those IO. |
| CVE-2024-26961 | In the Linux kernel, the following vulnerability has been resolved: mac802154: fix llsec key resources release in mac802154_llsec_key_del mac802154_llsec_key_del() can free resources of a key directly without following the RCU rules for waiting before the end of a grace period. This may lead to use-after-free in case llsec_lookup_key() is traversing the list of keys in parallel with a key deletion: refcount_t: addition on 0; use-after-free. WARNING: CPU: 4 PID: 16000 at lib/refcount.c:25 refcount_warn_saturate+0x162/0x2a0 Modules linked in: CPU: 4 PID: 16000 Comm: wpan-ping Not tainted 6.7.0 #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:refcount_warn_saturate+0x162/0x2a0 Call Trace: <TASK> llsec_lookup_key.isra.0+0x890/0x9e0 mac802154_llsec_encrypt+0x30c/0x9c0 ieee802154_subif_start_xmit+0x24/0x1e0 dev_hard_start_xmit+0x13e/0x690 sch_direct_xmit+0x2ae/0xbc0 __dev_queue_xmit+0x11dd/0x3c20 dgram_sendmsg+0x90b/0xd60 __sys_sendto+0x466/0x4c0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x45/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Also, ieee802154_llsec_key_entry structures are not freed by mac802154_llsec_key_del(): unreferenced object 0xffff8880613b6980 (size 64): comm "iwpan", pid 2176, jiffies 4294761134 (age 60.475s) hex dump (first 32 bytes): 78 0d 8f 18 80 88 ff ff 22 01 00 00 00 00 ad de x......."....... 00 00 00 00 00 00 00 00 03 00 cd ab 00 00 00 00 ................ backtrace: [<ffffffff81dcfa62>] __kmem_cache_alloc_node+0x1e2/0x2d0 [<ffffffff81c43865>] kmalloc_trace+0x25/0xc0 [<ffffffff88968b09>] mac802154_llsec_key_add+0xac9/0xcf0 [<ffffffff8896e41a>] ieee802154_add_llsec_key+0x5a/0x80 [<ffffffff8892adc6>] nl802154_add_llsec_key+0x426/0x5b0 [<ffffffff86ff293e>] genl_family_rcv_msg_doit+0x1fe/0x2f0 [<ffffffff86ff46d1>] genl_rcv_msg+0x531/0x7d0 [<ffffffff86fee7a9>] netlink_rcv_skb+0x169/0x440 [<ffffffff86ff1d88>] genl_rcv+0x28/0x40 [<ffffffff86fec15c>] netlink_unicast+0x53c/0x820 [<ffffffff86fecd8b>] netlink_sendmsg+0x93b/0xe60 [<ffffffff86b91b35>] ____sys_sendmsg+0xac5/0xca0 [<ffffffff86b9c3dd>] ___sys_sendmsg+0x11d/0x1c0 [<ffffffff86b9c65a>] __sys_sendmsg+0xfa/0x1d0 [<ffffffff88eadbf5>] do_syscall_64+0x45/0xf0 [<ffffffff890000ea>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 Handle the proper resource release in the RCU callback function mac802154_llsec_key_del_rcu(). Note that if llsec_lookup_key() finds a key, it gets a refcount via llsec_key_get() and locally copies key id from key_entry (which is a list element). So it's safe to call llsec_key_put() and free the list entry after the RCU grace period elapses. Found by Linux Verification Center (linuxtesting.org). |
| CVE-2024-26960 | In the Linux kernel, the following vulnerability has been resolved: mm: swap: fix race between free_swap_and_cache() and swapoff() There was previously a theoretical window where swapoff() could run and teardown a swap_info_struct while a call to free_swap_and_cache() was running in another thread. This could cause, amongst other bad possibilities, swap_page_trans_huge_swapped() (called by free_swap_and_cache()) to access the freed memory for swap_map. This is a theoretical problem and I haven't been able to provoke it from a test case. But there has been agreement based on code review that this is possible (see link below). Fix it by using get_swap_device()/put_swap_device(), which will stall swapoff(). There was an extra check in _swap_info_get() to confirm that the swap entry was not free. This isn't present in get_swap_device() because it doesn't make sense in general due to the race between getting the reference and swapoff. So I've added an equivalent check directly in free_swap_and_cache(). Details of how to provoke one possible issue (thanks to David Hildenbrand for deriving this): --8<----- __swap_entry_free() might be the last user and result in "count == SWAP_HAS_CACHE". swapoff->try_to_unuse() will stop as soon as soon as si->inuse_pages==0. So the question is: could someone reclaim the folio and turn si->inuse_pages==0, before we completed swap_page_trans_huge_swapped(). Imagine the following: 2 MiB folio in the swapcache. Only 2 subpages are still references by swap entries. Process 1 still references subpage 0 via swap entry. Process 2 still references subpage 1 via swap entry. Process 1 quits. Calls free_swap_and_cache(). -> count == SWAP_HAS_CACHE [then, preempted in the hypervisor etc.] Process 2 quits. Calls free_swap_and_cache(). -> count == SWAP_HAS_CACHE Process 2 goes ahead, passes swap_page_trans_huge_swapped(), and calls __try_to_reclaim_swap(). __try_to_reclaim_swap()->folio_free_swap()->delete_from_swap_cache()-> put_swap_folio()->free_swap_slot()->swapcache_free_entries()-> swap_entry_free()->swap_range_free()-> ... WRITE_ONCE(si->inuse_pages, si->inuse_pages - nr_entries); What stops swapoff to succeed after process 2 reclaimed the swap cache but before process1 finished its call to swap_page_trans_huge_swapped()? --8<----- |
| CVE-2024-26959 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix btnxpuart_close Fix scheduling while atomic BUG in btnxpuart_close(), properly purge the transmit queue and free the receive skb. [ 10.973809] BUG: scheduling while atomic: kworker/u9:0/80/0x00000002 ... [ 10.980740] CPU: 3 PID: 80 Comm: kworker/u9:0 Not tainted 6.8.0-rc7-0.0.0-devel-00005-g61fdfceacf09 #1 [ 10.980751] Hardware name: Toradex Verdin AM62 WB on Dahlia Board (DT) [ 10.980760] Workqueue: hci0 hci_power_off [bluetooth] [ 10.981169] Call trace: ... [ 10.981363] uart_update_mctrl+0x58/0x78 [ 10.981373] uart_dtr_rts+0x104/0x114 [ 10.981381] tty_port_shutdown+0xd4/0xdc [ 10.981396] tty_port_close+0x40/0xbc [ 10.981407] uart_close+0x34/0x9c [ 10.981414] ttyport_close+0x50/0x94 [ 10.981430] serdev_device_close+0x40/0x50 [ 10.981442] btnxpuart_close+0x24/0x98 [btnxpuart] [ 10.981469] hci_dev_close_sync+0x2d8/0x718 [bluetooth] [ 10.981728] hci_dev_do_close+0x2c/0x70 [bluetooth] [ 10.981862] hci_power_off+0x20/0x64 [bluetooth] |
| CVE-2024-26958 | In the Linux kernel, the following vulnerability has been resolved: nfs: fix UAF in direct writes In production we have been hitting the following warning consistently ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 17 PID: 1800359 at lib/refcount.c:28 refcount_warn_saturate+0x9c/0xe0 Workqueue: nfsiod nfs_direct_write_schedule_work [nfs] RIP: 0010:refcount_warn_saturate+0x9c/0xe0 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x9f/0x130 ? refcount_warn_saturate+0x9c/0xe0 ? report_bug+0xcc/0x150 ? handle_bug+0x3d/0x70 ? exc_invalid_op+0x16/0x40 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0x9c/0xe0 nfs_direct_write_schedule_work+0x237/0x250 [nfs] process_one_work+0x12f/0x4a0 worker_thread+0x14e/0x3b0 ? ZSTD_getCParams_internal+0x220/0x220 kthread+0xdc/0x120 ? __btf_name_valid+0xa0/0xa0 ret_from_fork+0x1f/0x30 This is because we're completing the nfs_direct_request twice in a row. The source of this is when we have our commit requests to submit, we process them and send them off, and then in the completion path for the commit requests we have if (nfs_commit_end(cinfo.mds)) nfs_direct_write_complete(dreq); However since we're submitting asynchronous requests we sometimes have one that completes before we submit the next one, so we end up calling complete on the nfs_direct_request twice. The only other place we use nfs_generic_commit_list() is in __nfs_commit_inode, which wraps this call in a nfs_commit_begin(); nfs_commit_end(); Which is a common pattern for this style of completion handling, one that is also repeated in the direct code with get_dreq()/put_dreq() calls around where we process events as well as in the completion paths. Fix this by using the same pattern for the commit requests. Before with my 200 node rocksdb stress running this warning would pop every 10ish minutes. With my patch the stress test has been running for several hours without popping. |
| CVE-2024-26957 | In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: fix reference counting on zcrypt card objects Tests with hot-plugging crytpo cards on KVM guests with debug kernel build revealed an use after free for the load field of the struct zcrypt_card. The reason was an incorrect reference handling of the zcrypt card object which could lead to a free of the zcrypt card object while it was still in use. This is an example of the slab message: kernel: 0x00000000885a7512-0x00000000885a7513 @offset=1298. First byte 0x68 instead of 0x6b kernel: Allocated in zcrypt_card_alloc+0x36/0x70 [zcrypt] age=18046 cpu=3 pid=43 kernel: kmalloc_trace+0x3f2/0x470 kernel: zcrypt_card_alloc+0x36/0x70 [zcrypt] kernel: zcrypt_cex4_card_probe+0x26/0x380 [zcrypt_cex4] kernel: ap_device_probe+0x15c/0x290 kernel: really_probe+0xd2/0x468 kernel: driver_probe_device+0x40/0xf0 kernel: __device_attach_driver+0xc0/0x140 kernel: bus_for_each_drv+0x8c/0xd0 kernel: __device_attach+0x114/0x198 kernel: bus_probe_device+0xb4/0xc8 kernel: device_add+0x4d2/0x6e0 kernel: ap_scan_adapter+0x3d0/0x7c0 kernel: ap_scan_bus+0x5a/0x3b0 kernel: ap_scan_bus_wq_callback+0x40/0x60 kernel: process_one_work+0x26e/0x620 kernel: worker_thread+0x21c/0x440 kernel: Freed in zcrypt_card_put+0x54/0x80 [zcrypt] age=9024 cpu=3 pid=43 kernel: kfree+0x37e/0x418 kernel: zcrypt_card_put+0x54/0x80 [zcrypt] kernel: ap_device_remove+0x4c/0xe0 kernel: device_release_driver_internal+0x1c4/0x270 kernel: bus_remove_device+0x100/0x188 kernel: device_del+0x164/0x3c0 kernel: device_unregister+0x30/0x90 kernel: ap_scan_adapter+0xc8/0x7c0 kernel: ap_scan_bus+0x5a/0x3b0 kernel: ap_scan_bus_wq_callback+0x40/0x60 kernel: process_one_work+0x26e/0x620 kernel: worker_thread+0x21c/0x440 kernel: kthread+0x150/0x168 kernel: __ret_from_fork+0x3c/0x58 kernel: ret_from_fork+0xa/0x30 kernel: Slab 0x00000372022169c0 objects=20 used=18 fp=0x00000000885a7c88 flags=0x3ffff00000000a00(workingset|slab|node=0|zone=1|lastcpupid=0x1ffff) kernel: Object 0x00000000885a74b8 @offset=1208 fp=0x00000000885a7c88 kernel: Redzone 00000000885a74b0: bb bb bb bb bb bb bb bb ........ kernel: Object 00000000885a74b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74f8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a7508: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 68 4b 6b 6b 6b a5 kkkkkkkkkkhKkkk. kernel: Redzone 00000000885a7518: bb bb bb bb bb bb bb bb ........ kernel: Padding 00000000885a756c: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ kernel: CPU: 0 PID: 387 Comm: systemd-udevd Not tainted 6.8.0-HF #2 kernel: Hardware name: IBM 3931 A01 704 (KVM/Linux) kernel: Call Trace: kernel: [<00000000ca5ab5b8>] dump_stack_lvl+0x90/0x120 kernel: [<00000000c99d78bc>] check_bytes_and_report+0x114/0x140 kernel: [<00000000c99d53cc>] check_object+0x334/0x3f8 kernel: [<00000000c99d820c>] alloc_debug_processing+0xc4/0x1f8 kernel: [<00000000c99d852e>] get_partial_node.part.0+0x1ee/0x3e0 kernel: [<00000000c99d94ec>] ___slab_alloc+0xaf4/0x13c8 kernel: [<00000000c99d9e38>] __slab_alloc.constprop.0+0x78/0xb8 kernel: [<00000000c99dc8dc>] __kmalloc+0x434/0x590 kernel: [<00000000c9b4c0ce>] ext4_htree_store_dirent+0x4e/0x1c0 kernel: [<00000000c9b908a2>] htree_dirblock_to_tree+0x17a/0x3f0 kernel: ---truncated--- |
| CVE-2024-26956 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix failure to detect DAT corruption in btree and direct mappings Patch series "nilfs2: fix kernel bug at submit_bh_wbc()". This resolves a kernel BUG reported by syzbot. Since there are two flaws involved, I've made each one a separate patch. The first patch alone resolves the syzbot-reported bug, but I think both fixes should be sent to stable, so I've tagged them as such. This patch (of 2): Syzbot has reported a kernel bug in submit_bh_wbc() when writing file data to a nilfs2 file system whose metadata is corrupted. There are two flaws involved in this issue. The first flaw is that when nilfs_get_block() locates a data block using btree or direct mapping, if the disk address translation routine nilfs_dat_translate() fails with internal code -ENOENT due to DAT metadata corruption, it can be passed back to nilfs_get_block(). This causes nilfs_get_block() to misidentify an existing block as non-existent, causing both data block lookup and insertion to fail inconsistently. The second flaw is that nilfs_get_block() returns a successful status in this inconsistent state. This causes the caller __block_write_begin_int() or others to request a read even though the buffer is not mapped, resulting in a BUG_ON check for the BH_Mapped flag in submit_bh_wbc() failing. This fixes the first issue by changing the return value to code -EINVAL when a conversion using DAT fails with code -ENOENT, avoiding the conflicting condition that leads to the kernel bug described above. Here, code -EINVAL indicates that metadata corruption was detected during the block lookup, which will be properly handled as a file system error and converted to -EIO when passing through the nilfs2 bmap layer. |
| CVE-2024-26955 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: prevent kernel bug at submit_bh_wbc() Fix a bug where nilfs_get_block() returns a successful status when searching and inserting the specified block both fail inconsistently. If this inconsistent behavior is not due to a previously fixed bug, then an unexpected race is occurring, so return a temporary error -EAGAIN instead. This prevents callers such as __block_write_begin_int() from requesting a read into a buffer that is not mapped, which would cause the BUG_ON check for the BH_Mapped flag in submit_bh_wbc() to fail. |
| CVE-2024-26954 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16() If ->NameOffset of smb2_create_req is smaller than Buffer offset of smb2_create_req, slab-out-of-bounds read can happen from smb2_open. This patch set the minimum value of the name offset to the buffer offset to validate name length of smb2_create_req(). |
| CVE-2024-26953 | In the Linux kernel, the following vulnerability has been resolved: net: esp: fix bad handling of pages from page_pool When the skb is reorganized during esp_output (!esp->inline), the pages coming from the original skb fragments are supposed to be released back to the system through put_page. But if the skb fragment pages are originating from a page_pool, calling put_page on them will trigger a page_pool leak which will eventually result in a crash. This leak can be easily observed when using CONFIG_DEBUG_VM and doing ipsec + gre (non offloaded) forwarding: BUG: Bad page state in process ksoftirqd/16 pfn:1451b6 page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6 flags: 0x200000000000000(node=0|zone=2) page_type: 0xffffffff() raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000 raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000 page dumped because: page_pool leak Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core] CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x36/0x50 bad_page+0x70/0xf0 free_unref_page_prepare+0x27a/0x460 free_unref_page+0x38/0x120 esp_ssg_unref.isra.0+0x15f/0x200 esp_output_tail+0x66d/0x780 esp_xmit+0x2c5/0x360 validate_xmit_xfrm+0x313/0x370 ? validate_xmit_skb+0x1d/0x330 validate_xmit_skb_list+0x4c/0x70 sch_direct_xmit+0x23e/0x350 __dev_queue_xmit+0x337/0xba0 ? nf_hook_slow+0x3f/0xd0 ip_finish_output2+0x25e/0x580 iptunnel_xmit+0x19b/0x240 ip_tunnel_xmit+0x5fb/0xb60 ipgre_xmit+0x14d/0x280 [ip_gre] dev_hard_start_xmit+0xc3/0x1c0 __dev_queue_xmit+0x208/0xba0 ? nf_hook_slow+0x3f/0xd0 ip_finish_output2+0x1ca/0x580 ip_sublist_rcv_finish+0x32/0x40 ip_sublist_rcv+0x1b2/0x1f0 ? ip_rcv_finish_core.constprop.0+0x460/0x460 ip_list_rcv+0x103/0x130 __netif_receive_skb_list_core+0x181/0x1e0 netif_receive_skb_list_internal+0x1b3/0x2c0 napi_gro_receive+0xc8/0x200 gro_cell_poll+0x52/0x90 __napi_poll+0x25/0x1a0 net_rx_action+0x28e/0x300 __do_softirq+0xc3/0x276 ? sort_range+0x20/0x20 run_ksoftirqd+0x1e/0x30 smpboot_thread_fn+0xa6/0x130 kthread+0xcd/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x31/0x50 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> The suggested fix is to introduce a new wrapper (skb_page_unref) that covers page refcounting for page_pool pages as well. |
| CVE-2024-26952 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix potencial out-of-bounds when buffer offset is invalid I found potencial out-of-bounds when buffer offset fields of a few requests is invalid. This patch set the minimum value of buffer offset field to ->Buffer offset to validate buffer length. |
| CVE-2024-26951 | In the Linux kernel, the following vulnerability has been resolved: wireguard: netlink: check for dangling peer via is_dead instead of empty list If all peers are removed via wg_peer_remove_all(), rather than setting peer_list to empty, the peer is added to a temporary list with a head on the stack of wg_peer_remove_all(). If a netlink dump is resumed and the cursored peer is one that has been removed via wg_peer_remove_all(), it will iterate from that peer and then attempt to dump freed peers. Fix this by instead checking peer->is_dead, which was explictly created for this purpose. Also move up the device_update_lock lockdep assertion, since reading is_dead relies on that. It can be reproduced by a small script like: echo "Setting config..." ip link add dev wg0 type wireguard wg setconf wg0 /big-config ( while true; do echo "Showing config..." wg showconf wg0 > /dev/null done ) & sleep 4 wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n") Resulting in: BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20 Read of size 8 at addr ffff88811956ec70 by task wg/59 CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ #5 Call Trace: <TASK> dump_stack_lvl+0x47/0x70 print_address_description.constprop.0+0x2c/0x380 print_report+0xab/0x250 kasan_report+0xba/0xf0 __lock_acquire+0x182a/0x1b20 lock_acquire+0x191/0x4b0 down_read+0x80/0x440 get_peer+0x140/0xcb0 wg_get_device_dump+0x471/0x1130 |
| CVE-2024-26950 | In the Linux kernel, the following vulnerability has been resolved: wireguard: netlink: access device through ctx instead of peer The previous commit fixed a bug that led to a NULL peer->device being dereferenced. It's actually easier and faster performance-wise to instead get the device from ctx->wg. This semantically makes more sense too, since ctx->wg->peer_allowedips.seq is compared with ctx->allowedips_seq, basing them both in ctx. This also acts as a defence in depth provision against freed peers. |
| CVE-2024-26949 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix NULL pointer dereference when get power limit Because powerplay_table initialization is skipped under sriov case, We check and set default lower and upper OD value if powerplay_table is NULL. |
| CVE-2024-26948 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add a dc_state NULL check in dc_state_release [How] Check wheather state is NULL before releasing it. |
| CVE-2024-26947 | In the Linux kernel, the following vulnerability has been resolved: ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses Since commit a4d5613c4dc6 ("arm: extend pfn_valid to take into account freed memory map alignment") changes the semantics of pfn_valid() to check presence of the memory map for a PFN. A valid page for an address which is reserved but not mapped by the kernel[1], the system crashed during some uio test with the following memory layout: node 0: [mem 0x00000000c0a00000-0x00000000cc8fffff] node 0: [mem 0x00000000d0000000-0x00000000da1fffff] the uio layout is：0xc0900000, 0x100000 the crash backtrace like: Unable to handle kernel paging request at virtual address bff00000 [...] CPU: 1 PID: 465 Comm: startapp.bin Tainted: G O 5.10.0 #1 Hardware name: Generic DT based system PC is at b15_flush_kern_dcache_area+0x24/0x3c LR is at __sync_icache_dcache+0x6c/0x98 [...] (b15_flush_kern_dcache_area) from (__sync_icache_dcache+0x6c/0x98) (__sync_icache_dcache) from (set_pte_at+0x28/0x54) (set_pte_at) from (remap_pfn_range+0x1a0/0x274) (remap_pfn_range) from (uio_mmap+0x184/0x1b8 [uio]) (uio_mmap [uio]) from (__mmap_region+0x264/0x5f4) (__mmap_region) from (__do_mmap_mm+0x3ec/0x440) (__do_mmap_mm) from (do_mmap+0x50/0x58) (do_mmap) from (vm_mmap_pgoff+0xfc/0x188) (vm_mmap_pgoff) from (ksys_mmap_pgoff+0xac/0xc4) (ksys_mmap_pgoff) from (ret_fast_syscall+0x0/0x5c) Code: e0801001 e2423001 e1c00003 f57ff04f (ee070f3e) ---[ end trace 09cf0734c3805d52 ]--- Kernel panic - not syncing: Fatal exception So check if PG_reserved was set to solve this issue. [1]: https://lore.kernel.org/lkml/[email protected]/ |
| CVE-2024-26946 | In the Linux kernel, the following vulnerability has been resolved: kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address Read from an unsafe address with copy_from_kernel_nofault() in arch_adjust_kprobe_addr() because this function is used before checking the address is in text or not. Syzcaller bot found a bug and reported the case if user specifies inaccessible data area, arch_adjust_kprobe_addr() will cause a kernel panic. [ mingo: Clarified the comment. ] |
| CVE-2024-26945 | In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix nr_cpus < nr_iaa case If nr_cpus < nr_iaa, the calculated cpus_per_iaa will be 0, which causes a divide-by-0 in rebalance_wq_table(). Make sure cpus_per_iaa is 1 in that case, and also in the nr_iaa == 0 case, even though cpus_per_iaa is never used if nr_iaa == 0, for paranoia. |
| CVE-2024-26944 | In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free in do_zone_finish() Shinichiro reported the following use-after-free triggered by the device replace operation in fstests btrfs/070. BTRFS info (device nullb1): scrub: finished on devid 1 with status: 0 ================================================================== BUG: KASAN: slab-use-after-free in do_zone_finish+0x91a/0xb90 [btrfs] Read of size 8 at addr ffff8881543c8060 by task btrfs-cleaner/3494007 CPU: 0 PID: 3494007 Comm: btrfs-cleaner Tainted: G W 6.8.0-rc5-kts #1 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Call Trace: <TASK> dump_stack_lvl+0x5b/0x90 print_report+0xcf/0x670 ? __virt_addr_valid+0x200/0x3e0 kasan_report+0xd8/0x110 ? do_zone_finish+0x91a/0xb90 [btrfs] ? do_zone_finish+0x91a/0xb90 [btrfs] do_zone_finish+0x91a/0xb90 [btrfs] btrfs_delete_unused_bgs+0x5e1/0x1750 [btrfs] ? __pfx_btrfs_delete_unused_bgs+0x10/0x10 [btrfs] ? btrfs_put_root+0x2d/0x220 [btrfs] ? btrfs_clean_one_deleted_snapshot+0x299/0x430 [btrfs] cleaner_kthread+0x21e/0x380 [btrfs] ? __pfx_cleaner_kthread+0x10/0x10 [btrfs] kthread+0x2e3/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 3493983: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 btrfs_alloc_device+0xb3/0x4e0 [btrfs] device_list_add.constprop.0+0x993/0x1630 [btrfs] btrfs_scan_one_device+0x219/0x3d0 [btrfs] btrfs_control_ioctl+0x26e/0x310 [btrfs] __x64_sys_ioctl+0x134/0x1b0 do_syscall_64+0x99/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Freed by task 3494056: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3f/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x32/0x70 kfree+0x11b/0x320 btrfs_rm_dev_replace_free_srcdev+0xca/0x280 [btrfs] btrfs_dev_replace_finishing+0xd7e/0x14f0 [btrfs] btrfs_dev_replace_by_ioctl+0x1286/0x25a0 [btrfs] btrfs_ioctl+0xb27/0x57d0 [btrfs] __x64_sys_ioctl+0x134/0x1b0 do_syscall_64+0x99/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 The buggy address belongs to the object at ffff8881543c8000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 96 bytes inside of freed 1024-byte region [ffff8881543c8000, ffff8881543c8400) The buggy address belongs to the physical page: page:00000000fe2c1285 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1543c8 head:00000000fe2c1285 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000840(slab|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000840 ffff888100042dc0 ffffea0019e8f200 dead000000000002 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881543c7f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881543c7f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881543c8000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881543c8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881543c8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb This UAF happens because we're accessing stale zone information of a already removed btrfs_device in do_zone_finish(). The sequence of events is as follows: btrfs_dev_replace_start btrfs_scrub_dev btrfs_dev_replace_finishing btrfs_dev_replace_update_device_in_mapping_tree <-- devices replaced btrfs_rm_dev_replace_free_srcdev btrfs_free_device <-- device freed cleaner_kthread btrfs_delete_unused_bgs btrfs_zone_finish do_zone_finish <-- refers the freed device The reason for this is that we're using a ---truncated--- |
| CVE-2024-26943 | In the Linux kernel, the following vulnerability has been resolved: nouveau/dmem: handle kcalloc() allocation failure The kcalloc() in nouveau_dmem_evict_chunk() will return null if the physical memory has run out. As a result, if we dereference src_pfns, dst_pfns or dma_addrs, the null pointer dereference bugs will happen. Moreover, the GPU is going away. If the kcalloc() fails, we could not evict all pages mapping a chunk. So this patch adds a __GFP_NOFAIL flag in kcalloc(). Finally, as there is no need to have physically contiguous memory, this patch switches kcalloc() to kvcalloc() in order to avoid failing allocations. |
| CVE-2024-26942 | In the Linux kernel, the following vulnerability has been resolved: net: phy: qcom: at803x: fix kernel panic with at8031_probe On reworking and splitting the at803x driver, in splitting function of at803x PHYs it was added a NULL dereference bug where priv is referenced before it's actually allocated and then is tried to write to for the is_1000basex and is_fiber variables in the case of at8031, writing on the wrong address. Fix this by correctly setting priv local variable only after at803x_probe is called and actually allocates priv in the phydev struct. |
| CVE-2024-26941 | In the Linux kernel, the following vulnerability has been resolved: drm/dp: Fix divide-by-zero regression on DP MST unplug with nouveau Fix a regression when using nouveau and unplugging a StarTech MSTDP122DP DisplayPort 1.2 MST hub (the same regression does not appear when using a Cable Matters DisplayPort 1.4 MST hub). Trace: divide error: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 2962 Comm: Xorg Not tainted 6.8.0-rc3+ #744 Hardware name: Razer Blade/DANA_MB, BIOS 01.01 08/31/2018 RIP: 0010:drm_dp_bw_overhead+0xb4/0x110 [drm_display_helper] Code: c6 b8 01 00 00 00 75 61 01 c6 41 0f af f3 41 0f af f1 c1 e1 04 48 63 c7 31 d2 89 ff 48 8b 5d f8 c9 48 0f af f1 48 8d 44 06 ff <48> f7 f7 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 45 31 RSP: 0018:ffffb2c5c211fa30 EFLAGS: 00010206 RAX: ffffffffffffffff RBX: 0000000000000000 RCX: 0000000000f59b00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb2c5c211fa48 R08: 0000000000000001 R09: 0000000000000020 R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000023b4a R13: ffff91d37d165800 R14: ffff91d36fac6d80 R15: ffff91d34a764010 FS: 00007f4a1ca3fa80(0000) GS:ffff91d6edbc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559491d49000 CR3: 000000011d180002 CR4: 00000000003706f0 Call Trace: <TASK> ? show_regs+0x6d/0x80 ? die+0x37/0xa0 ? do_trap+0xd4/0xf0 ? do_error_trap+0x71/0xb0 ? drm_dp_bw_overhead+0xb4/0x110 [drm_display_helper] ? exc_divide_error+0x3a/0x70 ? drm_dp_bw_overhead+0xb4/0x110 [drm_display_helper] ? asm_exc_divide_error+0x1b/0x20 ? drm_dp_bw_overhead+0xb4/0x110 [drm_display_helper] ? drm_dp_calc_pbn_mode+0x2e/0x70 [drm_display_helper] nv50_msto_atomic_check+0xda/0x120 [nouveau] drm_atomic_helper_check_modeset+0xa87/0xdf0 [drm_kms_helper] drm_atomic_helper_check+0x19/0xa0 [drm_kms_helper] nv50_disp_atomic_check+0x13f/0x2f0 [nouveau] drm_atomic_check_only+0x668/0xb20 [drm] ? drm_connector_list_iter_next+0x86/0xc0 [drm] drm_atomic_commit+0x58/0xd0 [drm] ? __pfx___drm_printfn_info+0x10/0x10 [drm] drm_atomic_connector_commit_dpms+0xd7/0x100 [drm] drm_mode_obj_set_property_ioctl+0x1c5/0x450 [drm] ? __pfx_drm_connector_property_set_ioctl+0x10/0x10 [drm] drm_connector_property_set_ioctl+0x3b/0x60 [drm] drm_ioctl_kernel+0xb9/0x120 [drm] drm_ioctl+0x2d0/0x550 [drm] ? __pfx_drm_connector_property_set_ioctl+0x10/0x10 [drm] nouveau_drm_ioctl+0x61/0xc0 [nouveau] __x64_sys_ioctl+0xa0/0xf0 do_syscall_64+0x76/0x140 ? do_syscall_64+0x85/0x140 ? do_syscall_64+0x85/0x140 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f4a1cd1a94f Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00 RSP: 002b:00007ffd2f1df520 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffd2f1df5b0 RCX: 00007f4a1cd1a94f RDX: 00007ffd2f1df5b0 RSI: 00000000c01064ab RDI: 000000000000000f RBP: 00000000c01064ab R08: 000056347932deb8 R09: 000056347a7d99c0 R10: 0000000000000000 R11: 0000000000000246 R12: 000056347938a220 R13: 000000000000000f R14: 0000563479d9f3f0 R15: 0000000000000000 </TASK> Modules linked in: rfcomm xt_conntrack nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack_netlink nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xfrm_user xfrm_algo xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc ccm cmac algif_hash overlay algif_skcipher af_alg bnep binfmt_misc snd_sof_pci_intel_cnl snd_sof_intel_hda_common snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_sof_utils snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core snd_compress snd_sof_intel_hda_mlink snd_hda_ext_core iwlmvm intel_rapl_msr intel_rapl_common intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp mac80211 coretemp kvm_intel snd_hda_codec_hdmi kvm snd_hda_ ---truncated--- |
| CVE-2024-26940 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the corresponding ttm_resource_manager is not allocated. This leads to a crash when trying to read from this file. Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file only when the corresponding ttm_resource_manager is allocated. crash> bt PID: 3133409 TASK: ffff8fe4834a5000 CPU: 3 COMMAND: "grep" #0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3 #1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a #2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1 #3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1 #4 [ffffb954506b3c70] no_context at ffffffffb2a7e913 #5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c #6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887 #7 [ffffb954506b3d40] page_fault at ffffffffb360116e [exception RIP: ttm_resource_manager_debug+0x11] RIP: ffffffffc04afd11 RSP: ffffb954506b3df0 RFLAGS: 00010246 RAX: ffff8fe41a6d1200 RBX: 0000000000000000 RCX: 0000000000000940 RDX: 0000000000000000 RSI: ffffffffc04b4338 RDI: 0000000000000000 RBP: ffffb954506b3e08 R8: ffff8fee3ffad000 R9: 0000000000000000 R10: ffff8fe41a76a000 R11: 0000000000000001 R12: 00000000ffffffff R13: 0000000000000001 R14: ffff8fe5bb6f3900 R15: ffff8fe41a6d1200 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm] #9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3 RIP: 00007f4c4eda8985 RSP: 00007ffdbba9e9f8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 000000000037e000 RCX: 00007f4c4eda8985 RDX: 000000000037e000 RSI: 00007f4c41573000 RDI: 0000000000000003 RBP: 000000000037e000 R8: 0000000000000000 R9: 000000000037fe30 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4c41573000 R13: 0000000000000003 R14: 00007f4c41572010 R15: 0000000000000003 ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b |
| CVE-2024-26939 | In the Linux kernel, the following vulnerability has been resolved: drm/i915/vma: Fix UAF on destroy against retire race Object debugging tools were sporadically reporting illegal attempts to free a still active i915 VMA object when parking a GT believed to be idle. [161.359441] ODEBUG: free active (active state 0) object: ffff88811643b958 object type: i915_active hint: __i915_vma_active+0x0/0x50 [i915] [161.360082] WARNING: CPU: 5 PID: 276 at lib/debugobjects.c:514 debug_print_object+0x80/0xb0 ... [161.360304] CPU: 5 PID: 276 Comm: kworker/5:2 Not tainted 6.5.0-rc1-CI_DRM_13375-g003f860e5577+ #1 [161.360314] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022 [161.360322] Workqueue: i915-unordered __intel_wakeref_put_work [i915] [161.360592] RIP: 0010:debug_print_object+0x80/0xb0 ... [161.361347] debug_object_free+0xeb/0x110 [161.361362] i915_active_fini+0x14/0x130 [i915] [161.361866] release_references+0xfe/0x1f0 [i915] [161.362543] i915_vma_parked+0x1db/0x380 [i915] [161.363129] __gt_park+0x121/0x230 [i915] [161.363515] ____intel_wakeref_put_last+0x1f/0x70 [i915] That has been tracked down to be happening when another thread is deactivating the VMA inside __active_retire() helper, after the VMA's active counter has been already decremented to 0, but before deactivation of the VMA's object is reported to the object debugging tool. We could prevent from that race by serializing i915_active_fini() with __active_retire() via ref->tree_lock, but that wouldn't stop the VMA from being used, e.g. from __i915_vma_retire() called at the end of __active_retire(), after that VMA has been already freed by a concurrent i915_vma_destroy() on return from the i915_active_fini(). Then, we should rather fix the issue at the VMA level, not in i915_active. Since __i915_vma_parked() is called from __gt_park() on last put of the GT's wakeref, the issue could be addressed by holding the GT wakeref long enough for __active_retire() to complete before that wakeref is released and the GT parked. I believe the issue was introduced by commit d93939730347 ("drm/i915: Remove the vma refcount") which moved a call to i915_active_fini() from a dropped i915_vma_release(), called on last put of the removed VMA kref, to i915_vma_parked() processing path called on last put of a GT wakeref. However, its visibility to the object debugging tool was suppressed by a bug in i915_active that was fixed two weeks later with commit e92eb246feb9 ("drm/i915/active: Fix missing debug object activation"). A VMA associated with a request doesn't acquire a GT wakeref by itself. Instead, it depends on a wakeref held directly by the request's active intel_context for a GT associated with its VM, and indirectly on that intel_context's engine wakeref if the engine belongs to the same GT as the VMA's VM. Those wakerefs are released asynchronously to VMA deactivation. Fix the issue by getting a wakeref for the VMA's GT when activating it, and putting that wakeref only after the VMA is deactivated. However, exclude global GTT from that processing path, otherwise the GPU never goes idle. Since __i915_vma_retire() may be called from atomic contexts, use async variant of wakeref put. Also, to avoid circular locking dependency, take care of acquiring the wakeref before VM mutex when both are needed. v7: Add inline comments with justifications for: - using untracked variants of intel_gt_pm_get/put() (Nirmoy), - using async variant of _put(), - not getting the wakeref in case of a global GTT, - always getting the first wakeref outside vm->mutex. v6: Since __i915_vma_active/retire() callbacks are not serialized, storing a wakeref tracking handle inside struct i915_vma is not safe, and there is no other good place for that. Use untracked variants of intel_gt_pm_get/put_async(). v5: Replace "tile" with "GT" across commit description (Rodrigo), - ---truncated--- |
| CVE-2024-26938 | In the Linux kernel, the following vulnerability has been resolved: drm/i915/bios: Tolerate devdata==NULL in intel_bios_encoder_supports_dp_dual_mode() If we have no VBT, or the VBT didn't declare the encoder in question, we won't have the 'devdata' for the encoder. Instead of oopsing just bail early. We won't be able to tell whether the port is DP++ or not, but so be it. (cherry picked from commit 26410896206342c8a80d2b027923e9ee7d33b733) |
| CVE-2024-26937 | In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Reset queue_priority_hint on parking Originally, with strict in order execution, we could complete execution only when the queue was empty. Preempt-to-busy allows replacement of an active request that may complete before the preemption is processed by HW. If that happens, the request is retired from the queue, but the queue_priority_hint remains set, preventing direct submission until after the next CS interrupt is processed. This preempt-to-busy race can be triggered by the heartbeat, which will also act as the power-management barrier and upon completion allow us to idle the HW. We may process the completion of the heartbeat, and begin parking the engine before the CS event that restores the queue_priority_hint, causing us to fail the assertion that it is MIN. <3>[ 166.210729] __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1)) <0>[ 166.210781] Dumping ftrace buffer: <0>[ 166.210795] --------------------------------- ... <0>[ 167.302811] drm_fdin-1097 2..s1. 165741070us : trace_ports: 0000:00:02.0 rcs0: promote { ccid:20 1217:2 prio 0 } <0>[ 167.302861] drm_fdin-1097 2d.s2. 165741072us : execlists_submission_tasklet: 0000:00:02.0 rcs0: preempting last=1217:2, prio=0, hint=2147483646 <0>[ 167.302928] drm_fdin-1097 2d.s2. 165741072us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 1217:2, current 0 <0>[ 167.302992] drm_fdin-1097 2d.s2. 165741073us : __i915_request_submit: 0000:00:02.0 rcs0: fence 3:4660, current 4659 <0>[ 167.303044] drm_fdin-1097 2d.s1. 165741076us : execlists_submission_tasklet: 0000:00:02.0 rcs0: context:3 schedule-in, ccid:40 <0>[ 167.303095] drm_fdin-1097 2d.s1. 165741077us : trace_ports: 0000:00:02.0 rcs0: submit { ccid:40 3:4660* prio 2147483646 } <0>[ 167.303159] kworker/-89 11..... 165741139us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence c90:2, current 2 <0>[ 167.303208] kworker/-89 11..... 165741148us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:c90 unpin <0>[ 167.303272] kworker/-89 11..... 165741159us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 1217:2, current 2 <0>[ 167.303321] kworker/-89 11..... 165741166us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:1217 unpin <0>[ 167.303384] kworker/-89 11..... 165741170us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 3:4660, current 4660 <0>[ 167.303434] kworker/-89 11d..1. 165741172us : __intel_context_retire: 0000:00:02.0 rcs0: context:1216 retire runtime: { total:56028ns, avg:56028ns } <0>[ 167.303484] kworker/-89 11..... 165741198us : __engine_park: 0000:00:02.0 rcs0: parked <0>[ 167.303534] <idle>-0 5d.H3. 165741207us : execlists_irq_handler: 0000:00:02.0 rcs0: semaphore yield: 00000040 <0>[ 167.303583] kworker/-89 11..... 165741397us : __intel_context_retire: 0000:00:02.0 rcs0: context:1217 retire runtime: { total:325575ns, avg:0ns } <0>[ 167.303756] kworker/-89 11..... 165741777us : __intel_context_retire: 0000:00:02.0 rcs0: context:c90 retire runtime: { total:0ns, avg:0ns } <0>[ 167.303806] kworker/-89 11..... 165742017us : __engine_park: __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1)) <0>[ 167.303811] --------------------------------- <4>[ 167.304722] ------------[ cut here ]------------ <2>[ 167.304725] kernel BUG at drivers/gpu/drm/i915/gt/intel_engine_pm.c:283! <4>[ 167.304731] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 167.304734] CPU: 11 PID: 89 Comm: kworker/11:1 Tainted: G W 6.8.0-rc2-CI_DRM_14193-gc655e0fd2804+ #1 <4>[ 167.304736] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022 <4>[ 167.304738] Workqueue: i915-unordered retire_work_handler [i915] <4>[ 16 ---truncated--- |
| CVE-2024-26936 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate request buffer size in smb2_allocate_rsp_buf() The response buffer should be allocated in smb2_allocate_rsp_buf before validating request. But the fields in payload as well as smb2 header is used in smb2_allocate_rsp_buf(). This patch add simple buffer size validation to avoid potencial out-of-bounds in request buffer. |
| CVE-2024-26935 | In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix unremoved procfs host directory regression Commit fc663711b944 ("scsi: core: Remove the /proc/scsi/${proc_name} directory earlier") fixed a bug related to modules loading/unloading, by adding a call to scsi_proc_hostdir_rm() on scsi_remove_host(). But that led to a potential duplicate call to the hostdir_rm() routine, since it's also called from scsi_host_dev_release(). That triggered a regression report, which was then fixed by commit be03df3d4bfe ("scsi: core: Fix a procfs host directory removal regression"). The fix just dropped the hostdir_rm() call from dev_release(). But it happens that this proc directory is created on scsi_host_alloc(), and that function "pairs" with scsi_host_dev_release(), while scsi_remove_host() pairs with scsi_add_host(). In other words, it seems the reason for removing the proc directory on dev_release() was meant to cover cases in which a SCSI host structure was allocated, but the call to scsi_add_host() didn't happen. And that pattern happens to exist in some error paths, for example. Syzkaller causes that by using USB raw gadget device, error'ing on usb-storage driver, at usb_stor_probe2(). By checking that path, we can see that the BadDevice label leads to a scsi_host_put() after a SCSI host allocation, but there's no call to scsi_add_host() in such path. That leads to messages like this in dmesg (and a leak of the SCSI host proc structure): usb-storage 4-1:87.51: USB Mass Storage device detected proc_dir_entry 'scsi/usb-storage' already registered WARNING: CPU: 1 PID: 3519 at fs/proc/generic.c:377 proc_register+0x347/0x4e0 fs/proc/generic.c:376 The proper fix seems to still call scsi_proc_hostdir_rm() on dev_release(), but guard that with the state check for SHOST_CREATED; there is even a comment in scsi_host_dev_release() detailing that: such conditional is meant for cases where the SCSI host was allocated but there was no calls to {add,remove}_host(), like the usb-storage case. This is what we propose here and with that, the error path of usb-storage does not trigger the warning anymore. |
| CVE-2024-26934 | In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix deadlock in usb_deauthorize_interface() Among the attribute file callback routines in drivers/usb/core/sysfs.c, the interface_authorized_store() function is the only one which acquires a device lock on an ancestor device: It calls usb_deauthorize_interface(), which locks the interface's parent USB device. The will lead to deadlock if another process already owns that lock and tries to remove the interface, whether through a configuration change or because the device has been disconnected. As part of the removal procedure, device_del() waits for all ongoing sysfs attribute callbacks to complete. But usb_deauthorize_interface() can't complete until the device lock has been released, and the lock won't be released until the removal has finished. The mechanism provided by sysfs to prevent this kind of deadlock is to use the sysfs_break_active_protection() function, which tells sysfs not to wait for the attribute callback. Reported-and-tested by: Yue Sun <[email protected]> Reported by: xingwei lee <[email protected]> |
| CVE-2024-26933 | In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix deadlock in port "disable" sysfs attribute The show and store callback routines for the "disable" sysfs attribute file in port.c acquire the device lock for the port's parent hub device. This can cause problems if another process has locked the hub to remove it or change its configuration: Removing the hub or changing its configuration requires the hub interface to be removed, which requires the port device to be removed, and device_del() waits until all outstanding sysfs attribute callbacks for the ports have returned. The lock can't be released until then. But the disable_show() or disable_store() routine can't return until after it has acquired the lock. The resulting deadlock can be avoided by calling sysfs_break_active_protection(). This will cause the sysfs core not to wait for the attribute's callback routine to return, allowing the removal to proceed. The disadvantage is that after making this call, there is no guarantee that the hub structure won't be deallocated at any moment. To prevent this, we have to acquire a reference to it first by calling hub_get(). |
| CVE-2024-26932 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: fix double-free issue in tcpm_port_unregister_pd() When unregister pd capabilitie in tcpm, KASAN will capture below double -free issue. The root cause is the same capabilitiy will be kfreed twice, the first time is kfreed by pd_capabilities_release() and the second time is explicitly kfreed by tcpm_port_unregister_pd(). [ 3.988059] BUG: KASAN: double-free in tcpm_port_unregister_pd+0x1a4/0x3dc [ 3.995001] Free of addr ffff0008164d3000 by task kworker/u16:0/10 [ 4.001206] [ 4.002712] CPU: 2 PID: 10 Comm: kworker/u16:0 Not tainted 6.8.0-rc5-next-20240220-05616-g52728c567a55 #53 [ 4.012402] Hardware name: Freescale i.MX8QXP MEK (DT) [ 4.017569] Workqueue: events_unbound deferred_probe_work_func [ 4.023456] Call trace: [ 4.025920] dump_backtrace+0x94/0xec [ 4.029629] show_stack+0x18/0x24 [ 4.032974] dump_stack_lvl+0x78/0x90 [ 4.036675] print_report+0xfc/0x5c0 [ 4.040289] kasan_report_invalid_free+0xa0/0xc0 [ 4.044937] __kasan_slab_free+0x124/0x154 [ 4.049072] kfree+0xb4/0x1e8 [ 4.052069] tcpm_port_unregister_pd+0x1a4/0x3dc [ 4.056725] tcpm_register_port+0x1dd0/0x2558 [ 4.061121] tcpci_register_port+0x420/0x71c [ 4.065430] tcpci_probe+0x118/0x2e0 To fix the issue, this will remove kree() from tcpm_port_unregister_pd(). |
| CVE-2024-26931 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix command flush on cable pull System crash due to command failed to flush back to SCSI layer. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 27 PID: 793455 Comm: kworker/u130:6 Kdump: loaded Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021 Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc] RIP: 0010:__wake_up_common+0x4c/0x190 Code: 24 10 4d 85 c9 74 0a 41 f6 01 04 0f 85 9d 00 00 00 48 8b 43 08 48 83 c3 08 4c 8d 48 e8 49 8d 41 18 48 39 c3 0f 84 f0 00 00 00 <49> 8b 41 18 89 54 24 08 31 ed 4c 8d 70 e8 45 8b 29 41 f6 c5 04 75 RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8 R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __wake_up_common_lock+0x7c/0xc0 qla_nvme_ls_req+0x355/0x4c0 [qla2xxx] qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae1407ca000 from port 21:32:00:02:ac:07:ee:b8 loop_id 0x02 s_id 01:02:00 logout 1 keep 0 els_logo 0 ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc] qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:00:02:ac:07:ee:b8 state transitioned from ONLINE to LOST - portid=010200. ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc] qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320002ac07eeb8. rport ffff8ae598122000 roles 1 ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc] qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae14801e000 from port 21:32:01:02:ad:f7:ee:b8 loop_id 0x04 s_id 01:02:01 logout 1 keep 0 els_logo 0 ? __switch_to+0x10c/0x450 ? process_one_work+0x1a7/0x360 qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:01:02:ad:f7:ee:b8 state transitioned from ONLINE to LOST - portid=010201. ? worker_thread+0x1ce/0x390 ? create_worker+0x1a0/0x1a0 qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320102adf7eeb8. rport ffff8ae3b2312800 roles 70 ? kthread+0x10a/0x120 qla2xxx [0000:12:00.1]-2112:3: qla_nvme_unregister_remote_port: unregister remoteport on ffff8ae14801e000 21320102adf7eeb8 ? set_kthread_struct+0x40/0x40 qla2xxx [0000:12:00.1]-2110:3: remoteport_delete of ffff8ae14801e000 21320102adf7eeb8 completed. ? ret_from_fork+0x1f/0x40 qla2xxx [0000:12:00.1]-f086:3: qlt_free_session_done: waiting for sess ffff8ae14801e000 logout The system was under memory stress where driver was not able to allocate an SRB to carry out error recovery of cable pull. The failure to flush causes upper layer to start modifying scsi_cmnd. When the system frees up some memory, the subsequent cable pull trigger another command flush. At this point the driver access a null pointer when attempting to DMA unmap the SGL. Add a check to make sure commands are flush back on session tear down to prevent the null pointer access. |
| CVE-2024-26930 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix double free of the ha->vp_map pointer Coverity scan reported potential risk of double free of the pointer ha->vp_map. ha->vp_map was freed in qla2x00_mem_alloc(), and again freed in function qla2x00_mem_free(ha). Assign NULL to vp_map and kfree take care of NULL. |
| CVE-2024-26929 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix double free of fcport The server was crashing after LOGO because fcport was getting freed twice. -----------[ cut here ]----------- kernel BUG at mm/slub.c:371! invalid opcode: 0000 1 SMP PTI CPU: 35 PID: 4610 Comm: bash Kdump: loaded Tainted: G OE --------- - - 4.18.0-425.3.1.el8.x86_64 #1 Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021 RIP: 0010:set_freepointer.part.57+0x0/0x10 RSP: 0018:ffffb07107027d90 EFLAGS: 00010246 RAX: ffff9cb7e3150000 RBX: ffff9cb7e332b9c0 RCX: ffff9cb7e3150400 RDX: 0000000000001f37 RSI: 0000000000000000 RDI: ffff9cb7c0005500 RBP: fffff693448c5400 R08: 0000000080000000 R09: 0000000000000009 R10: 0000000000000000 R11: 0000000000132af0 R12: ffff9cb7c0005500 R13: ffff9cb7e3150000 R14: ffffffffc06990e0 R15: ffff9cb7ea85ea58 FS: 00007ff6b79c2740(0000) GS:ffff9cb8f7ec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b426b7d700 CR3: 0000000169c18002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: kfree+0x238/0x250 qla2x00_els_dcmd_sp_free+0x20/0x230 [qla2xxx] ? qla24xx_els_dcmd_iocb+0x607/0x690 [qla2xxx] qla2x00_issue_logo+0x28c/0x2a0 [qla2xxx] ? qla2x00_issue_logo+0x28c/0x2a0 [qla2xxx] ? kernfs_fop_write+0x11e/0x1a0 Remove one of the free calls and add check for valid fcport. Also use function qla2x00_free_fcport() instead of kfree(). |
| CVE-2024-26928 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_debug_files_proc_show() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF. |
| CVE-2024-26927 | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Add some bounds checking to firmware data Smatch complains about "head->full_size - head->header_size" can underflow. To some extent, we're always going to have to trust the firmware a bit. However, it's easy enough to add a check for negatives, and let's add a upper bounds check as well. |
| CVE-2024-26926 | In the Linux kernel, the following vulnerability has been resolved: binder: check offset alignment in binder_get_object() Commit 6d98eb95b450 ("binder: avoid potential data leakage when copying txn") introduced changes to how binder objects are copied. In doing so, it unintentionally removed an offset alignment check done through calls to binder_alloc_copy_from_buffer() -> check_buffer(). These calls were replaced in binder_get_object() with copy_from_user(), so now an explicit offset alignment check is needed here. This avoids later complications when unwinding the objects gets harder. It is worth noting this check existed prior to commit 7a67a39320df ("binder: add function to copy binder object from buffer"), likely removed due to redundancy at the time. |
| CVE-2024-26925 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path The commit mutex should not be released during the critical section between nft_gc_seq_begin() and nft_gc_seq_end(), otherwise, async GC worker could collect expired objects and get the released commit lock within the same GC sequence. nf_tables_module_autoload() temporarily releases the mutex to load module dependencies, then it goes back to replay the transaction again. Move it at the end of the abort phase after nft_gc_seq_end() is called. |
| CVE-2024-26924 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: do not free live element Pablo reports a crash with large batches of elements with a back-to-back add/remove pattern. Quoting Pablo: add_elem("00000000") timeout 100 ms ... add_elem("0000000X") timeout 100 ms del_elem("0000000X") <---------------- delete one that was just added ... add_elem("00005000") timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat. Looking at the remove function there is a chance that we will drop a rule that maps to a non-deactivated element. Removal happens in two steps, first we do a lookup for key k and return the to-be-removed element and mark it as inactive in the next generation. Then, in a second step, the element gets removed from the set/map. The _remove function does not work correctly if we have more than one element that share the same key. This can happen if we insert an element into a set when the set already holds an element with same key, but the element mapping to the existing key has timed out or is not active in the next generation. In such case its possible that removal will unmap the wrong element. If this happens, we will leak the non-deactivated element, it becomes unreachable. The element that got deactivated (and will be freed later) will remain reachable in the set data structure, this can result in a crash when such an element is retrieved during lookup (stale pointer). Add a check that the fully matching key does in fact map to the element that we have marked as inactive in the deactivation step. If not, we need to continue searching. Add a bug/warn trap at the end of the function as well, the remove function must not ever be called with an invisible/unreachable/non-existent element. v2: avoid uneeded temporary variable (Stefano) |
| CVE-2024-26923 | In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix garbage collector racing against connect() Garbage collector does not take into account the risk of embryo getting enqueued during the garbage collection. If such embryo has a peer that carries SCM_RIGHTS, two consecutive passes of scan_children() may see a different set of children. Leading to an incorrectly elevated inflight count, and then a dangling pointer within the gc_inflight_list. sockets are AF_UNIX/SOCK_STREAM S is an unconnected socket L is a listening in-flight socket bound to addr, not in fdtable V's fd will be passed via sendmsg(), gets inflight count bumped connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc() ---------------- ------------------------- ----------- NS = unix_create1() skb1 = sock_wmalloc(NS) L = unix_find_other(addr) unix_state_lock(L) unix_peer(S) = NS // V count=1 inflight=0 NS = unix_peer(S) skb2 = sock_alloc() skb_queue_tail(NS, skb2[V]) // V became in-flight // V count=2 inflight=1 close(V) // V count=1 inflight=1 // GC candidate condition met for u in gc_inflight_list: if (total_refs == inflight_refs) add u to gc_candidates // gc_candidates={L, V} for u in gc_candidates: scan_children(u, dec_inflight) // embryo (skb1) was not // reachable from L yet, so V's // inflight remains unchanged __skb_queue_tail(L, skb1) unix_state_unlock(L) for u in gc_candidates: if (u.inflight) scan_children(u, inc_inflight_move_tail) // V count=1 inflight=2 (!) If there is a GC-candidate listening socket, lock/unlock its state. This makes GC wait until the end of any ongoing connect() to that socket. After flipping the lock, a possibly SCM-laden embryo is already enqueued. And if there is another embryo coming, it can not possibly carry SCM_RIGHTS. At this point, unix_inflight() can not happen because unix_gc_lock is already taken. Inflight graph remains unaffected. |
| CVE-2024-26922 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate the parameters of bo mapping operations more clearly Verify the parameters of amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place. |
| CVE-2024-26921 | In the Linux kernel, the following vulnerability has been resolved: inet: inet_defrag: prevent sk release while still in use ip_local_out() and other functions can pass skb->sk as function argument. If the skb is a fragment and reassembly happens before such function call returns, the sk must not be released. This affects skb fragments reassembled via netfilter or similar modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline. Eric Dumazet made an initial analysis of this bug. Quoting Eric: Calling ip_defrag() in output path is also implying skb_orphan(), which is buggy because output path relies on sk not disappearing. A relevant old patch about the issue was : 8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()") [..] net/ipv4/ip_output.c depends on skb->sk being set, and probably to an inet socket, not an arbitrary one. If we orphan the packet in ipvlan, then downstream things like FQ packet scheduler will not work properly. We need to change ip_defrag() to only use skb_orphan() when really needed, ie whenever frag_list is going to be used. Eric suggested to stash sk in fragment queue and made an initial patch. However there is a problem with this: If skb is refragmented again right after, ip_do_fragment() will copy head->sk to the new fragments, and sets up destructor to sock_wfree. IOW, we have no choice but to fix up sk_wmem accouting to reflect the fully reassembled skb, else wmem will underflow. This change moves the orphan down into the core, to last possible moment. As ip_defrag_offset is aliased with sk_buff->sk member, we must move the offset into the FRAG_CB, else skb->sk gets clobbered. This allows to delay the orphaning long enough to learn if the skb has to be queued or if the skb is completing the reasm queue. In the former case, things work as before, skb is orphaned. This is safe because skb gets queued/stolen and won't continue past reasm engine. In the latter case, we will steal the skb->sk reference, reattach it to the head skb, and fix up wmem accouting when inet_frag inflates truesize. |
| CVE-2024-26920 | In the Linux kernel, the following vulnerability has been resolved: tracing/trigger: Fix to return error if failed to alloc snapshot Fix register_snapshot_trigger() to return error code if it failed to allocate a snapshot instead of 0 (success). Unless that, it will register snapshot trigger without an error. |
| CVE-2024-26919 | In the Linux kernel, the following vulnerability has been resolved: usb: ulpi: Fix debugfs directory leak The ULPI per-device debugfs root is named after the ulpi device's parent, but ulpi_unregister_interface tries to remove a debugfs directory named after the ulpi device itself. This results in the directory sticking around and preventing subsequent (deferred) probes from succeeding. Change the directory name to match the ulpi device. |
| CVE-2024-26918 | In the Linux kernel, the following vulnerability has been resolved: PCI: Fix active state requirement in PME polling The commit noted in fixes added a bogus requirement that runtime PM managed devices need to be in the RPM_ACTIVE state for PME polling. In fact, only devices in low power states should be polled. However there's still a requirement that the device config space must be accessible, which has implications for both the current state of the polled device and the parent bridge, when present. It's not sufficient to assume the bridge remains in D0 and cases have been observed where the bridge passes the D0 test, but the PM state indicates RPM_SUSPENDING and config space of the polled device becomes inaccessible during pci_pme_wakeup(). Therefore, since the bridge is already effectively required to be in the RPM_ACTIVE state, formalize this in the code and elevate the PM usage count to maintain the state while polling the subordinate device. This resolves a regression reported in the bugzilla below where a Thunderbolt/USB4 hierarchy fails to scan for an attached NVMe endpoint downstream of a bridge in a D3hot power state. |
| CVE-2024-26917 | In the Linux kernel, the following vulnerability has been resolved: scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock" This reverts commit 1a1975551943f681772720f639ff42fbaa746212. This commit causes interrupts to be lost for FCoE devices, since it changed sping locks from "bh" to "irqsave". Instead, a work queue should be used, and will be addressed in a separate commit. |
| CVE-2024-26916 | In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amd: flush any delayed gfxoff on suspend entry" commit ab4750332dbe ("drm/amdgpu/sdma5.2: add begin/end_use ring callbacks") caused GFXOFF control to be used more heavily and the codepath that was removed from commit 0dee72639533 ("drm/amd: flush any delayed gfxoff on suspend entry") now can be exercised at suspend again. Users report that by using GNOME to suspend the lockscreen trigger will cause SDMA traffic and the system can deadlock. This reverts commit 0dee726395333fea833eaaf838bc80962df886c8. |
| CVE-2024-26915 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Reset IH OVERFLOW_CLEAR bit Allows us to detect subsequent IH ring buffer overflows as well. |
| CVE-2024-26914 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix incorrect mpc_combine array size [why] MAX_SURFACES is per stream, while MAX_PLANES is per asic. The mpc_combine is an array that records all the planes per asic. Therefore MAX_PLANES should be used as the array size. Using MAX_SURFACES causes array overflow when there are more than 3 planes. [how] Use the MAX_PLANES for the mpc_combine array size. |
| CVE-2024-26913 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dcn35 8k30 Underflow/Corruption Issue [why] odm calculation is missing for pipe split policy determination and cause Underflow/Corruption issue. [how] Add the odm calculation. |
| CVE-2024-26912 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix several DMA buffer leaks Nouveau manages GSP-RM DMA buffers with nvkm_gsp_mem objects. Several of these buffers are never dealloced. Some of them can be deallocated right after GSP-RM is initialized, but the rest need to stay until the driver unloads. Also futher bullet-proof these objects by poisoning the buffer and clearing the nvkm_gsp_mem object when it is deallocated. Poisoning the buffer should trigger an error (or crash) from GSP-RM if it tries to access the buffer after we've deallocated it, because we were wrong about when it is safe to deallocate. Finally, change the mem->size field to a size_t because that's the same type that dma_alloc_coherent expects. |
| CVE-2024-26911 | In the Linux kernel, the following vulnerability has been resolved: drm/buddy: Fix alloc_range() error handling code Few users have observed display corruption when they boot the machine to KDE Plasma or playing games. We have root caused the problem that whenever alloc_range() couldn't find the required memory blocks the function was returning SUCCESS in some of the corner cases. The right approach would be if the total allocated size is less than the required size, the function should return -ENOSPC. |
| CVE-2024-26910 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix performance regression in swap operation The patch "netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test", commit 28628fa9 fixes a race condition. But the synchronize_rcu() added to the swap function unnecessarily slows it down: it can safely be moved to destroy and use call_rcu() instead. Eric Dumazet pointed out that simply calling the destroy functions as rcu callback does not work: sets with timeout use garbage collectors which need cancelling at destroy which can wait. Therefore the destroy functions are split into two: cancelling garbage collectors safely at executing the command received by netlink and moving the remaining part only into the rcu callback. |
| CVE-2024-26909 | In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pmic_glink_altmode: fix drm bridge use-after-free A recent DRM series purporting to simplify support for "transparent bridges" and handling of probe deferrals ironically exposed a use-after-free issue on pmic_glink_altmode probe deferral. This has manifested itself as the display subsystem occasionally failing to initialise and NULL-pointer dereferences during boot of machines like the Lenovo ThinkPad X13s. Specifically, the dp-hpd bridge is currently registered before all resources have been acquired which means that it can also be deregistered on probe deferrals. In the meantime there is a race window where the new aux bridge driver (or PHY driver previously) may have looked up the dp-hpd bridge and stored a (non-reference-counted) pointer to the bridge which is about to be deallocated. When the display controller is later initialised, this triggers a use-after-free when attaching the bridges: dp -> aux -> dp-hpd (freed) which may, for example, result in the freed bridge failing to attach: [drm:drm_bridge_attach [drm]] *ERROR* failed to attach bridge /soc@0/phy@88eb000 to encoder TMDS-31: -16 or a NULL-pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... Call trace: drm_bridge_attach+0x70/0x1a8 [drm] drm_aux_bridge_attach+0x24/0x38 [aux_bridge] drm_bridge_attach+0x80/0x1a8 [drm] dp_bridge_init+0xa8/0x15c [msm] msm_dp_modeset_init+0x28/0xc4 [msm] The DRM bridge implementation is clearly fragile and implicitly built on the assumption that bridges may never go away. In this case, the fix is to move the bridge registration in the pmic_glink_altmode driver to after all resources have been looked up. Incidentally, with the new dp-hpd bridge implementation, which registers child devices, this is also a requirement due to a long-standing issue in driver core that can otherwise lead to a probe deferral loop (see commit fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER")). [DB: slightly fixed commit message by adding the word 'commit'] |
| CVE-2024-26907 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix fortify source warning while accessing Eth segment ------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_ ---truncated--- |
| CVE-2024-26906 | In the Linux kernel, the following vulnerability has been resolved: x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault() When trying to use copy_from_kernel_nofault() to read vsyscall page through a bpf program, the following oops was reported: BUG: unable to handle page fault for address: ffffffffff600000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 3231067 P4D 3231067 PUD 3233067 PMD 3235067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 20390 Comm: test_progs ...... 6.7.0+ #58 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:copy_from_kernel_nofault+0x6f/0x110 ...... Call Trace: <TASK> ? copy_from_kernel_nofault+0x6f/0x110 bpf_probe_read_kernel+0x1d/0x50 bpf_prog_2061065e56845f08_do_probe_read+0x51/0x8d trace_call_bpf+0xc5/0x1c0 perf_call_bpf_enter.isra.0+0x69/0xb0 perf_syscall_enter+0x13e/0x200 syscall_trace_enter+0x188/0x1c0 do_syscall_64+0xb5/0xe0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> ...... ---[ end trace 0000000000000000 ]--- The oops is triggered when: 1) A bpf program uses bpf_probe_read_kernel() to read from the vsyscall page and invokes copy_from_kernel_nofault() which in turn calls __get_user_asm(). 2) Because the vsyscall page address is not readable from kernel space, a page fault exception is triggered accordingly. 3) handle_page_fault() considers the vsyscall page address as a user space address instead of a kernel space address. This results in the fix-up setup by bpf not being applied and a page_fault_oops() is invoked due to SMAP. Considering handle_page_fault() has already considered the vsyscall page address as a userspace address, fix the problem by disallowing vsyscall page read for copy_from_kernel_nofault(). |
| CVE-2024-26903 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security During our fuzz testing of the connection and disconnection process at the RFCOMM layer, we discovered this bug. By comparing the packets from a normal connection and disconnection process with the testcase that triggered a KASAN report. We analyzed the cause of this bug as follows: 1. In the packets captured during a normal connection, the host sends a `Read Encryption Key Size` type of `HCI_CMD` packet (Command Opcode: 0x1408) to the controller to inquire the length of encryption key.After receiving this packet, the controller immediately replies with a Command Completepacket (Event Code: 0x0e) to return the Encryption Key Size. 2. In our fuzz test case, the timing of the controller's response to this packet was delayed to an unexpected point: after the RFCOMM and L2CAP layers had disconnected but before the HCI layer had disconnected. 3. After receiving the Encryption Key Size Response at the time described in point 2, the host still called the rfcomm_check_security function. However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;` had already been released, and when the function executed `return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`, specifically when accessing `conn->hcon`, a null-ptr-deref error occurred. To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling rfcomm_recv_frame in rfcomm_process_rx. |
| CVE-2024-26902 | In the Linux kernel, the following vulnerability has been resolved: perf: RISCV: Fix panic on pmu overflow handler (1 << idx) of int is not desired when setting bits in unsigned long overflowed_ctrs, use BIT() instead. This panic happens when running 'perf record -e branches' on sophgo sg2042. [ 273.311852] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 273.320851] Oops [#1] [ 273.323179] Modules linked in: [ 273.326303] CPU: 0 PID: 1475 Comm: perf Not tainted 6.6.0-rc3+ #9 [ 273.332521] Hardware name: Sophgo Mango (DT) [ 273.336878] epc : riscv_pmu_ctr_get_width_mask+0x8/0x62 [ 273.342291] ra : pmu_sbi_ovf_handler+0x2e0/0x34e [ 273.347091] epc : ffffffff80aecd98 ra : ffffffff80aee056 sp : fffffff6e36928b0 [ 273.354454] gp : ffffffff821f82d0 tp : ffffffd90c353200 t0 : 0000002ade4f9978 [ 273.361815] t1 : 0000000000504d55 t2 : ffffffff8016cd8c s0 : fffffff6e3692a70 [ 273.369180] s1 : 0000000000000020 a0 : 0000000000000000 a1 : 00001a8e81800000 [ 273.376540] a2 : 0000003c00070198 a3 : 0000003c00db75a4 a4 : 0000000000000015 [ 273.383901] a5 : ffffffd7ff8804b0 a6 : 0000000000000015 a7 : 000000000000002a [ 273.391327] s2 : 000000000000ffff s3 : 0000000000000000 s4 : ffffffd7ff8803b0 [ 273.398773] s5 : 0000000000504d55 s6 : ffffffd905069800 s7 : ffffffff821fe210 [ 273.406139] s8 : 000000007fffffff s9 : ffffffd7ff8803b0 s10: ffffffd903f29098 [ 273.413660] s11: 0000000080000000 t3 : 0000000000000003 t4 : ffffffff8017a0ca [ 273.421022] t5 : ffffffff8023cfc2 t6 : ffffffd9040780e8 [ 273.426437] status: 0000000200000100 badaddr: 0000000000000098 cause: 000000000000000d [ 273.434512] [<ffffffff80aecd98>] riscv_pmu_ctr_get_width_mask+0x8/0x62 [ 273.441169] [<ffffffff80076bd8>] handle_percpu_devid_irq+0x98/0x1ee [ 273.447562] [<ffffffff80071158>] generic_handle_domain_irq+0x28/0x36 [ 273.454151] [<ffffffff8047a99a>] riscv_intc_irq+0x36/0x4e [ 273.459659] [<ffffffff80c944de>] handle_riscv_irq+0x4a/0x74 [ 273.465442] [<ffffffff80c94c48>] do_irq+0x62/0x92 [ 273.470360] Code: 0420 60a2 6402 5529 0141 8082 0013 0000 0013 0000 (6d5c) b783 [ 273.477921] ---[ end trace 0000000000000000 ]--- [ 273.482630] Kernel panic - not syncing: Fatal exception in interrupt |
| CVE-2024-26901 | In the Linux kernel, the following vulnerability has been resolved: do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak syzbot identified a kernel information leak vulnerability in do_sys_name_to_handle() and issued the following report [1]. [1] "BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x100 lib/usercopy.c:40 instrument_copy_to_user include/linux/instrumented.h:114 [inline] _copy_to_user+0xbc/0x100 lib/usercopy.c:40 copy_to_user include/linux/uaccess.h:191 [inline] do_sys_name_to_handle fs/fhandle.c:73 [inline] __do_sys_name_to_handle_at fs/fhandle.c:112 [inline] __se_sys_name_to_handle_at+0x949/0xb10 fs/fhandle.c:94 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94 ... Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] __kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517 __do_kmalloc_node mm/slab_common.c:1006 [inline] __kmalloc+0x121/0x3c0 mm/slab_common.c:1020 kmalloc include/linux/slab.h:604 [inline] do_sys_name_to_handle fs/fhandle.c:39 [inline] __do_sys_name_to_handle_at fs/fhandle.c:112 [inline] __se_sys_name_to_handle_at+0x441/0xb10 fs/fhandle.c:94 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94 ... Bytes 18-19 of 20 are uninitialized Memory access of size 20 starts at ffff888128a46380 Data copied to user address 0000000020000240" Per Chuck Lever's suggestion, use kzalloc() instead of kmalloc() to solve the problem. |
| CVE-2024-26900 | In the Linux kernel, the following vulnerability has been resolved: md: fix kmemleak of rdev->serial If kobject_add() is fail in bind_rdev_to_array(), 'rdev->serial' will be alloc not be freed, and kmemleak occurs. unreferenced object 0xffff88815a350000 (size 49152): comm "mdadm", pid 789, jiffies 4294716910 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc f773277a): [<0000000058b0a453>] kmemleak_alloc+0x61/0xe0 [<00000000366adf14>] __kmalloc_large_node+0x15e/0x270 [<000000002e82961b>] __kmalloc_node.cold+0x11/0x7f [<00000000f206d60a>] kvmalloc_node+0x74/0x150 [<0000000034bf3363>] rdev_init_serial+0x67/0x170 [<0000000010e08fe9>] mddev_create_serial_pool+0x62/0x220 [<00000000c3837bf0>] bind_rdev_to_array+0x2af/0x630 [<0000000073c28560>] md_add_new_disk+0x400/0x9f0 [<00000000770e30ff>] md_ioctl+0x15bf/0x1c10 [<000000006cfab718>] blkdev_ioctl+0x191/0x3f0 [<0000000085086a11>] vfs_ioctl+0x22/0x60 [<0000000018b656fe>] __x64_sys_ioctl+0xba/0xe0 [<00000000e54e675e>] do_syscall_64+0x71/0x150 [<000000008b0ad622>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 |
| CVE-2024-26899 | In the Linux kernel, the following vulnerability has been resolved: block: fix deadlock between bd_link_disk_holder and partition scan 'open_mutex' of gendisk is used to protect open/close block devices. But in bd_link_disk_holder(), it is used to protect the creation of symlink between holding disk and slave bdev, which introduces some issues. When bd_link_disk_holder() is called, the driver is usually in the process of initialization/modification and may suspend submitting io. At this time, any io hold 'open_mutex', such as scanning partitions, can cause deadlocks. For example, in raid: T1 T2 bdev_open_by_dev lock open_mutex [1] ... efi_partition ... md_submit_bio md_ioctl mddev_syspend -> suspend all io md_add_new_disk bind_rdev_to_array bd_link_disk_holder try lock open_mutex [2] md_handle_request -> wait mddev_resume T1 scan partition, T2 add a new device to raid. T1 waits for T2 to resume mddev, but T2 waits for open_mutex held by T1. Deadlock occurs. Fix it by introducing a local mutex 'blk_holder_mutex' to replace 'open_mutex'. |
| CVE-2024-26898 | In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts This patch is against CVE-2023-6270. The description of cve is: A flaw was found in the ATA over Ethernet (AoE) driver in the Linux kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on `struct net_device`, and a use-after-free can be triggered by racing between the free on the struct and the access through the `skbtxq` global queue. This could lead to a denial of service condition or potential code execution. In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial code is finished. But the net_device ifp will still be used in later tx()->dev_queue_xmit() in kthread. Which means that the dev_put(ifp) should NOT be called in the success path of skb initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into use-after-free because the net_device is freed. This patch removed the dev_put(ifp) in the success path in aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx(). |
| CVE-2024-26897 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: delay all of ath9k_wmi_event_tasklet() until init is complete The ath9k_wmi_event_tasklet() used in ath9k_htc assumes that all the data structures have been fully initialised by the time it runs. However, because of the order in which things are initialised, this is not guaranteed to be the case, because the device is exposed to the USB subsystem before the ath9k driver initialisation is completed. We already committed a partial fix for this in commit: 8b3046abc99e ("ath9k_htc: fix NULL pointer dereference at ath9k_htc_tx_get_packet()") However, that commit only aborted the WMI_TXSTATUS_EVENTID command in the event tasklet, pairing it with an "initialisation complete" bit in the TX struct. It seems syzbot managed to trigger the race for one of the other commands as well, so let's just move the existing synchronisation bit to cover the whole tasklet (setting it at the end of ath9k_htc_probe_device() instead of inside ath9k_tx_init()). |
| CVE-2024-26896 | In the Linux kernel, the following vulnerability has been resolved: wifi: wfx: fix memory leak when starting AP Kmemleak reported this error: unreferenced object 0xd73d1180 (size 184): comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.245s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 1e 00 01 00 00 00 00 00 ................ backtrace: [<5ca11420>] kmem_cache_alloc+0x20c/0x5ac [<127bdd74>] __alloc_skb+0x144/0x170 [<fb8a5e38>] __netdev_alloc_skb+0x50/0x180 [<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211] [<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211] [<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx] [<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211] [<a4a661cd>] nl80211_start_ap+0x76c/0x9e0 [cfg80211] [<47bd8b68>] genl_rcv_msg+0x198/0x378 [<453ef796>] netlink_rcv_skb+0xd0/0x130 [<6b7c977a>] genl_rcv+0x34/0x44 [<66b2d04d>] netlink_unicast+0x1b4/0x258 [<f965b9b6>] netlink_sendmsg+0x1e8/0x428 [<aadb8231>] ____sys_sendmsg+0x1e0/0x274 [<d2b5212d>] ___sys_sendmsg+0x80/0xb4 [<69954f45>] __sys_sendmsg+0x64/0xa8 unreferenced object 0xce087000 (size 1024): comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.246s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 10 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<9a993714>] __kmalloc_track_caller+0x230/0x600 [<f83ea192>] kmalloc_reserve.constprop.0+0x30/0x74 [<a2c61343>] __alloc_skb+0xa0/0x170 [<fb8a5e38>] __netdev_alloc_skb+0x50/0x180 [<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211] [<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211] [<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx] [<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211] [<a4a661cd>] nl80211_start_ap+0x76c/0x9e0 [cfg80211] [<47bd8b68>] genl_rcv_msg+0x198/0x378 [<453ef796>] netlink_rcv_skb+0xd0/0x130 [<6b7c977a>] genl_rcv+0x34/0x44 [<66b2d04d>] netlink_unicast+0x1b4/0x258 [<f965b9b6>] netlink_sendmsg+0x1e8/0x428 [<aadb8231>] ____sys_sendmsg+0x1e0/0x274 [<d2b5212d>] ___sys_sendmsg+0x80/0xb4 However, since the kernel is build optimized, it seems the stack is not accurate. It appears the issue is related to wfx_set_mfp_ap(). The issue is obvious in this function: memory allocated by ieee80211_beacon_get() is never released. Fixing this leak makes kmemleak happy. |
| CVE-2024-26895 | In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: prevent use-after-free on vif when cleaning up all interfaces wilc_netdev_cleanup currently triggers a KASAN warning, which can be observed on interface registration error path, or simply by removing the module/unbinding device from driver: echo spi0.1 > /sys/bus/spi/drivers/wilc1000_spi/unbind ================================================================== BUG: KASAN: slab-use-after-free in wilc_netdev_cleanup+0x508/0x5cc Read of size 4 at addr c54d1ce8 by task sh/86 CPU: 0 PID: 86 Comm: sh Not tainted 6.8.0-rc1+ #117 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x58 dump_stack_lvl from print_report+0x154/0x500 print_report from kasan_report+0xac/0xd8 kasan_report from wilc_netdev_cleanup+0x508/0x5cc wilc_netdev_cleanup from wilc_bus_remove+0xc8/0xec wilc_bus_remove from spi_remove+0x8c/0xac spi_remove from device_release_driver_internal+0x434/0x5f8 device_release_driver_internal from unbind_store+0xbc/0x108 unbind_store from kernfs_fop_write_iter+0x398/0x584 kernfs_fop_write_iter from vfs_write+0x728/0xf88 vfs_write from ksys_write+0x110/0x1e4 ksys_write from ret_fast_syscall+0x0/0x1c [...] Allocated by task 1: kasan_save_track+0x30/0x5c __kasan_kmalloc+0x8c/0x94 __kmalloc_node+0x1cc/0x3e4 kvmalloc_node+0x48/0x180 alloc_netdev_mqs+0x68/0x11dc alloc_etherdev_mqs+0x28/0x34 wilc_netdev_ifc_init+0x34/0x8ec wilc_cfg80211_init+0x690/0x910 wilc_bus_probe+0xe0/0x4a0 spi_probe+0x158/0x1b0 really_probe+0x270/0xdf4 __driver_probe_device+0x1dc/0x580 driver_probe_device+0x60/0x140 __driver_attach+0x228/0x5d4 bus_for_each_dev+0x13c/0x1a8 bus_add_driver+0x2a0/0x608 driver_register+0x24c/0x578 do_one_initcall+0x180/0x310 kernel_init_freeable+0x424/0x484 kernel_init+0x20/0x148 ret_from_fork+0x14/0x28 Freed by task 86: kasan_save_track+0x30/0x5c kasan_save_free_info+0x38/0x58 __kasan_slab_free+0xe4/0x140 kfree+0xb0/0x238 device_release+0xc0/0x2a8 kobject_put+0x1d4/0x46c netdev_run_todo+0x8fc/0x11d0 wilc_netdev_cleanup+0x1e4/0x5cc wilc_bus_remove+0xc8/0xec spi_remove+0x8c/0xac device_release_driver_internal+0x434/0x5f8 unbind_store+0xbc/0x108 kernfs_fop_write_iter+0x398/0x584 vfs_write+0x728/0xf88 ksys_write+0x110/0x1e4 ret_fast_syscall+0x0/0x1c [...] David Mosberger-Tan initial investigation [1] showed that this use-after-free is due to netdevice unregistration during vif list traversal. When unregistering a net device, since the needs_free_netdev has been set to true during registration, the netdevice object is also freed, and as a consequence, the corresponding vif object too, since it is attached to it as private netdevice data. The next occurrence of the loop then tries to access freed vif pointer to the list to move forward in the list. Fix this use-after-free thanks to two mechanisms: - navigate in the list with list_for_each_entry_safe, which allows to safely modify the list as we go through each element. For each element, remove it from the list with list_del_rcu - make sure to wait for RCU grace period end after each vif removal to make sure it is safe to free the corresponding vif too (through unregister_netdev) Since we are in a RCU "modifier" path (not a "reader" path), and because such path is expected not to be concurrent to any other modifier (we are using the vif_mutex lock), we do not need to use RCU list API, that's why we can benefit from list_for_each_entry_safe. [1] https://lore.kernel.org/linux-wireless/[email protected]/ |
| CVE-2024-26894 | In the Linux kernel, the following vulnerability has been resolved: ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit() After unregistering the CPU idle device, the memory associated with it is not freed, leading to a memory leak: unreferenced object 0xffff896282f6c000 (size 1024): comm "swapper/0", pid 1, jiffies 4294893170 hex dump (first 32 bytes): 00 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 8836a742): [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340 [<ffffffff9972f3b3>] acpi_processor_power_init+0xf3/0x1c0 [<ffffffff9972d263>] __acpi_processor_start+0xd3/0xf0 [<ffffffff9972d2bc>] acpi_processor_start+0x2c/0x50 [<ffffffff99805872>] really_probe+0xe2/0x480 [<ffffffff99805c98>] __driver_probe_device+0x78/0x160 [<ffffffff99805daf>] driver_probe_device+0x1f/0x90 [<ffffffff9980601e>] __driver_attach+0xce/0x1c0 [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0 [<ffffffff99804822>] bus_add_driver+0x112/0x210 [<ffffffff99807245>] driver_register+0x55/0x100 [<ffffffff9aee4acb>] acpi_processor_driver_init+0x3b/0xc0 [<ffffffff990012d1>] do_one_initcall+0x41/0x300 [<ffffffff9ae7c4b0>] kernel_init_freeable+0x320/0x470 [<ffffffff99b231f6>] kernel_init+0x16/0x1b0 [<ffffffff99042e6d>] ret_from_fork+0x2d/0x50 Fix this by freeing the CPU idle device after unregistering it. |
| CVE-2024-26893 | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix double free in SMC transport cleanup path When the generic SCMI code tears down a channel, it calls the chan_free callback function, defined by each transport. Since multiple protocols might share the same transport_info member, chan_free() might want to clean up the same member multiple times within the given SCMI transport implementation. In this case, it is SMC transport. This will lead to a NULL pointer dereference at the second time: | scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16 | arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. | arm-scmi firmware:scmi: unable to communicate with SCMI | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000096000004 | EC = 0x25: DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | Data abort info: | ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 | CM = 0, WnR = 0, TnD = 0, TagAccess = 0 | GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881ef8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP | Modules linked in: | CPU: 4 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-00124-g455ef3d016c9-dirty #793 | Hardware name: FVP Base RevC (DT) | pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : smc_chan_free+0x3c/0x6c | lr : smc_chan_free+0x3c/0x6c | Call trace: | smc_chan_free+0x3c/0x6c | idr_for_each+0x68/0xf8 | scmi_cleanup_channels.isra.0+0x2c/0x58 | scmi_probe+0x434/0x734 | platform_probe+0x68/0xd8 | really_probe+0x110/0x27c | __driver_probe_device+0x78/0x12c | driver_probe_device+0x3c/0x118 | __driver_attach+0x74/0x128 | bus_for_each_dev+0x78/0xe0 | driver_attach+0x24/0x30 | bus_add_driver+0xe4/0x1e8 | driver_register+0x60/0x128 | __platform_driver_register+0x28/0x34 | scmi_driver_init+0x84/0xc0 | do_one_initcall+0x78/0x33c | kernel_init_freeable+0x2b8/0x51c | kernel_init+0x24/0x130 | ret_from_fork+0x10/0x20 | Code: f0004701 910a0021 aa1403e5 97b91c70 (b9400280) | ---[ end trace 0000000000000000 ]--- Simply check for the struct pointer being NULL before trying to access its members, to avoid this situation. This was found when a transport doesn't really work (for instance no SMC service), the probe routines then tries to clean up, and triggers a crash. |
| CVE-2024-26892 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921e: fix use-after-free in free_irq() From commit a304e1b82808 ("[PATCH] Debug shared irqs"), there is a test to make sure the shared irq handler should be able to handle the unexpected event after deregistration. For this case, let's apply MT76_REMOVED flag to indicate the device was removed and do not run into the resource access anymore. BUG: KASAN: use-after-free in mt7921_irq_handler+0xd8/0x100 [mt7921e] Read of size 8 at addr ffff88824a7d3b78 by task rmmod/11115 CPU: 28 PID: 11115 Comm: rmmod Tainted: G W L 5.17.0 #10 Hardware name: Micro-Star International Co., Ltd. MS-7D73/MPG B650I EDGE WIFI (MS-7D73), BIOS 1.81 01/05/2024 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x1f/0x190 ? mt7921_irq_handler+0xd8/0x100 [mt7921e] ? mt7921_irq_handler+0xd8/0x100 [mt7921e] kasan_report.cold+0x7f/0x11b ? mt7921_irq_handler+0xd8/0x100 [mt7921e] mt7921_irq_handler+0xd8/0x100 [mt7921e] free_irq+0x627/0xaa0 devm_free_irq+0x94/0xd0 ? devm_request_any_context_irq+0x160/0x160 ? kobject_put+0x18d/0x4a0 mt7921_pci_remove+0x153/0x190 [mt7921e] pci_device_remove+0xa2/0x1d0 __device_release_driver+0x346/0x6e0 driver_detach+0x1ef/0x2c0 bus_remove_driver+0xe7/0x2d0 ? __check_object_size+0x57/0x310 pci_unregister_driver+0x26/0x250 __do_sys_delete_module+0x307/0x510 ? free_module+0x6a0/0x6a0 ? fpregs_assert_state_consistent+0x4b/0xb0 ? rcu_read_lock_sched_held+0x10/0x70 ? syscall_enter_from_user_mode+0x20/0x70 ? trace_hardirqs_on+0x1c/0x130 do_syscall_64+0x5c/0x80 ? trace_hardirqs_on_prepare+0x72/0x160 ? do_syscall_64+0x68/0x80 ? trace_hardirqs_on_prepare+0x72/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2024-26891 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected For those endpoint devices connect to system via hotplug capable ports, users could request a hot reset to the device by flapping device's link through setting the slot's link control register, as pciehp_ist() DLLSC interrupt sequence response, pciehp will unload the device driver and then power it off. thus cause an IOMMU device-TLB invalidation (Intel VT-d spec, or ATS Invalidation in PCIe spec r6.1) request for non-existence target device to be sent and deadly loop to retry that request after ITE fault triggered in interrupt context. That would cause following continuous hard lockup warning and system hang [ 4211.433662] pcieport 0000:17:01.0: pciehp: Slot(108): Link Down [ 4211.433664] pcieport 0000:17:01.0: pciehp: Slot(108): Card not present [ 4223.822591] NMI watchdog: Watchdog detected hard LOCKUP on cpu 144 [ 4223.822622] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S OE kernel version xxxx [ 4223.822623] Hardware name: vendorname xxxx 666-106, BIOS 01.01.02.03.01 05/15/2023 [ 4223.822623] RIP: 0010:qi_submit_sync+0x2c0/0x490 [ 4223.822624] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b 57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 1 0 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39 [ 4223.822624] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093 [ 4223.822625] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005 [ 4223.822625] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340 [ 4223.822625] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000 [ 4223.822626] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200 [ 4223.822626] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004 [ 4223.822626] FS: 0000000000000000(0000) GS:ffffa237ae400000(0000) knlGS:0000000000000000 [ 4223.822627] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4223.822627] CR2: 00007ffe86515d80 CR3: 000002fd3000a001 CR4: 0000000000770ee0 [ 4223.822627] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4223.822628] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 4223.822628] PKRU: 55555554 [ 4223.822628] Call Trace: [ 4223.822628] qi_flush_dev_iotlb+0xb1/0xd0 [ 4223.822628] __dmar_remove_one_dev_info+0x224/0x250 [ 4223.822629] dmar_remove_one_dev_info+0x3e/0x50 [ 4223.822629] intel_iommu_release_device+0x1f/0x30 [ 4223.822629] iommu_release_device+0x33/0x60 [ 4223.822629] iommu_bus_notifier+0x7f/0x90 [ 4223.822630] blocking_notifier_call_chain+0x60/0x90 [ 4223.822630] device_del+0x2e5/0x420 [ 4223.822630] pci_remove_bus_device+0x70/0x110 [ 4223.822630] pciehp_unconfigure_device+0x7c/0x130 [ 4223.822631] pciehp_disable_slot+0x6b/0x100 [ 4223.822631] pciehp_handle_presence_or_link_change+0xd8/0x320 [ 4223.822631] pciehp_ist+0x176/0x180 [ 4223.822631] ? irq_finalize_oneshot.part.50+0x110/0x110 [ 4223.822632] irq_thread_fn+0x19/0x50 [ 4223.822632] irq_thread+0x104/0x190 [ 4223.822632] ? irq_forced_thread_fn+0x90/0x90 [ 4223.822632] ? irq_thread_check_affinity+0xe0/0xe0 [ 4223.822633] kthread+0x114/0x130 [ 4223.822633] ? __kthread_cancel_work+0x40/0x40 [ 4223.822633] ret_from_fork+0x1f/0x30 [ 4223.822633] Kernel panic - not syncing: Hard LOCKUP [ 4223.822634] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S OE kernel version xxxx [ 4223.822634] Hardware name: vendorname xxxx 666-106, BIOS 01.01.02.03.01 05/15/2023 [ 4223.822634] Call Trace: [ 4223.822634] <NMI> [ 4223.822635] dump_stack+0x6d/0x88 [ 4223.822635] panic+0x101/0x2d0 [ 4223.822635] ? ret_from_fork+0x11/0x30 [ 4223.822635] nmi_panic.cold.14+0xc/0xc [ 4223.822636] watchdog_overflow_callback.cold.8+0x6d/0x81 [ 4223.822636] __perf_event_overflow+0x4f/0xf0 [ 4223.822636] handle_pmi_common ---truncated--- |
| CVE-2024-26890 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: fix out of bounds memory access The problem is detected by KASAN. btrtl driver uses private hci data to store 'struct btrealtek_data'. If btrtl driver is used with btusb, then memory for private hci data is allocated in btusb. But no private data is allocated after hci_dev, when btrtl is used with hci_h5. This commit adds memory allocation for hci_h5 case. ================================================================== BUG: KASAN: slab-out-of-bounds in btrtl_initialize+0x6cc/0x958 [btrtl] Write of size 8 at addr ffff00000f5a5748 by task kworker/u9:0/76 Hardware name: Pine64 PinePhone (1.2) (DT) Workqueue: hci0 hci_power_on [bluetooth] Call trace: dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5d8 kasan_report+0x90/0xd0 __asan_store8+0x9c/0xc0 [btrtl] h5_btrtl_setup+0xd0/0x2f8 [hci_uart] h5_setup+0x50/0x80 [hci_uart] hci_uart_setup+0xd4/0x260 [hci_uart] hci_dev_open_sync+0x1cc/0xf68 [bluetooth] hci_dev_do_open+0x34/0x90 [bluetooth] hci_power_on+0xc4/0x3c8 [bluetooth] process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Allocated by task 53: kasan_save_stack+0x3c/0x68 kasan_save_track+0x20/0x40 kasan_save_alloc_info+0x68/0x78 __kasan_kmalloc+0xd4/0xd8 __kmalloc+0x1b4/0x3b0 hci_alloc_dev_priv+0x28/0xa58 [bluetooth] hci_uart_register_device+0x118/0x4f8 [hci_uart] h5_serdev_probe+0xf4/0x178 [hci_uart] serdev_drv_probe+0x54/0xa0 really_probe+0x254/0x588 __driver_probe_device+0xc4/0x210 driver_probe_device+0x64/0x160 __driver_attach_async_helper+0x88/0x158 async_run_entry_fn+0xd0/0x388 process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Last potentially related work creation: kasan_save_stack+0x3c/0x68 __kasan_record_aux_stack+0xb0/0x150 kasan_record_aux_stack_noalloc+0x14/0x20 __queue_work+0x33c/0x960 queue_work_on+0x98/0xc0 hci_recv_frame+0xc8/0x1e8 [bluetooth] h5_complete_rx_pkt+0x2c8/0x800 [hci_uart] h5_rx_payload+0x98/0xb8 [hci_uart] h5_recv+0x158/0x3d8 [hci_uart] hci_uart_receive_buf+0xa0/0xe8 [hci_uart] ttyport_receive_buf+0xac/0x178 flush_to_ldisc+0x130/0x2c8 process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Second to last potentially related work creation: kasan_save_stack+0x3c/0x68 __kasan_record_aux_stack+0xb0/0x150 kasan_record_aux_stack_noalloc+0x14/0x20 __queue_work+0x788/0x960 queue_work_on+0x98/0xc0 __hci_cmd_sync_sk+0x23c/0x7a0 [bluetooth] __hci_cmd_sync+0x24/0x38 [bluetooth] btrtl_initialize+0x760/0x958 [btrtl] h5_btrtl_setup+0xd0/0x2f8 [hci_uart] h5_setup+0x50/0x80 [hci_uart] hci_uart_setup+0xd4/0x260 [hci_uart] hci_dev_open_sync+0x1cc/0xf68 [bluetooth] hci_dev_do_open+0x34/0x90 [bluetooth] hci_power_on+0xc4/0x3c8 [bluetooth] process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 ================================================================== |
| CVE-2024-26889 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix possible buffer overflow struct hci_dev_info has a fixed size name[8] field so in the event that hdev->name is bigger than that strcpy would attempt to write past its size, so this fixes this problem by switching to use strscpy. |
| CVE-2024-26888 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: msft: Fix memory leak Fix leaking buffer allocated to send MSFT_OP_LE_MONITOR_ADVERTISEMENT. |
| CVE-2024-26887 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix memory leak This checks if CONFIG_DEV_COREDUMP is enabled before attempting to clone the skb and also make sure btmtk_process_coredump frees the skb passed following the same logic. |
| CVE-2024-26886 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: af_bluetooth: Fix deadlock Attemting to do sock_lock on .recvmsg may cause a deadlock as shown bellow, so instead of using sock_sock this uses sk_receive_queue.lock on bt_sock_ioctl to avoid the UAF: INFO: task kworker/u9:1:121 blocked for more than 30 seconds. Not tainted 6.7.6-lemon #183 Workqueue: hci0 hci_rx_work Call Trace: <TASK> __schedule+0x37d/0xa00 schedule+0x32/0xe0 __lock_sock+0x68/0xa0 ? __pfx_autoremove_wake_function+0x10/0x10 lock_sock_nested+0x43/0x50 l2cap_sock_recv_cb+0x21/0xa0 l2cap_recv_frame+0x55b/0x30a0 ? psi_task_switch+0xeb/0x270 ? finish_task_switch.isra.0+0x93/0x2a0 hci_rx_work+0x33a/0x3f0 process_one_work+0x13a/0x2f0 worker_thread+0x2f0/0x410 ? __pfx_worker_thread+0x10/0x10 kthread+0xe0/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> |
| CVE-2024-26885 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix DEVMAP_HASH overflow check on 32-bit arches The devmap code allocates a number hash buckets equal to the next power of two of the max_entries value provided when creating the map. When rounding up to the next power of two, the 32-bit variable storing the number of buckets can overflow, and the code checks for overflow by checking if the truncated 32-bit value is equal to 0. However, on 32-bit arches the rounding up itself can overflow mid-way through, because it ends up doing a left-shift of 32 bits on an unsigned long value. If the size of an unsigned long is four bytes, this is undefined behaviour, so there is no guarantee that we'll end up with a nice and tidy 0-value at the end. Syzbot managed to turn this into a crash on arm32 by creating a DEVMAP_HASH with max_entries > 0x80000000 and then trying to update it. Fix this by moving the overflow check to before the rounding up operation. |
| CVE-2024-26884 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix hashtab overflow check on 32-bit arches The hashtab code relies on roundup_pow_of_two() to compute the number of hash buckets, and contains an overflow check by checking if the resulting value is 0. However, on 32-bit arches, the roundup code itself can overflow by doing a 32-bit left-shift of an unsigned long value, which is undefined behaviour, so it is not guaranteed to truncate neatly. This was triggered by syzbot on the DEVMAP_HASH type, which contains the same check, copied from the hashtab code. So apply the same fix to hashtab, by moving the overflow check to before the roundup. |
| CVE-2024-26883 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stackmap overflow check on 32-bit arches The stackmap code relies on roundup_pow_of_two() to compute the number of hash buckets, and contains an overflow check by checking if the resulting value is 0. However, on 32-bit arches, the roundup code itself can overflow by doing a 32-bit left-shift of an unsigned long value, which is undefined behaviour, so it is not guaranteed to truncate neatly. This was triggered by syzbot on the DEVMAP_HASH type, which contains the same check, copied from the hashtab code. The commit in the fixes tag actually attempted to fix this, but the fix did not account for the UB, so the fix only works on CPUs where an overflow does result in a neat truncation to zero, which is not guaranteed. Checking the value before rounding does not have this problem. |
| CVE-2024-26882 | In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv() Apply the same fix than ones found in : 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") 1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()") We have to save skb->network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb->head. syzbot reported: BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] BUG: KMSAN: uninit-value in ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409 __ipgre_rcv+0x9bc/0xbc0 net/ipv4/ip_gre.c:389 ipgre_rcv net/ipv4/ip_gre.c:411 [inline] gre_rcv+0x423/0x19f0 net/ipv4/ip_gre.c:447 gre_rcv+0x2a4/0x390 net/ipv4/gre_demux.c:163 ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5534 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648 netif_receive_skb_internal net/core/dev.c:5734 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5793 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1556 tun_get_user+0x53b9/0x66e0 drivers/net/tun.c:2009 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055 call_write_iter include/linux/fs.h:2087 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb6b/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: __alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590 alloc_pages_mpol+0x62b/0x9d0 mm/mempolicy.c:2133 alloc_pages+0x1be/0x1e0 mm/mempolicy.c:2204 skb_page_frag_refill+0x2bf/0x7c0 net/core/sock.c:2909 tun_build_skb drivers/net/tun.c:1686 [inline] tun_get_user+0xe0a/0x66e0 drivers/net/tun.c:1826 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055 call_write_iter include/linux/fs.h:2087 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb6b/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b |
| CVE-2024-26881 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is received on HIP08 devices The HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL, but the hardware can receive 1588 messages, and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the access of hdev->ptp->flags will cause a kernel crash: [ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 [ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge] [ 5889.279101] sp : ffff800012c3bc50 [ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040 [ 5889.289927] x27: ffff800009116484 x26: 0000000080007500 [ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000 [ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000 [ 5889.309134] x21: 0000000000000000 x20: ffff204004220080 [ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000 [ 5889.321897] x17: 0000000000000000 x16: 0000000000000000 [ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000 [ 5889.334617] x13: 0000000000000000 x12: 00000000010011df [ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000 [ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d [ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480 [ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000 [ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000 [ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080 [ 5889.378857] Call trace: [ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3] [ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3] [ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3] [ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3] [ 5889.411084] napi_poll+0xcc/0x264 [ 5889.415329] net_rx_action+0xd4/0x21c [ 5889.419911] __do_softirq+0x130/0x358 [ 5889.424484] irq_exit+0x134/0x154 [ 5889.428700] __handle_domain_irq+0x88/0xf0 [ 5889.433684] gic_handle_irq+0x78/0x2c0 [ 5889.438319] el1_irq+0xb8/0x140 [ 5889.442354] arch_cpu_idle+0x18/0x40 [ 5889.446816] default_idle_call+0x5c/0x1c0 [ 5889.451714] cpuidle_idle_call+0x174/0x1b0 [ 5889.456692] do_idle+0xc8/0x160 [ 5889.460717] cpu_startup_entry+0x30/0xfc [ 5889.465523] secondary_start_kernel+0x158/0x1ec [ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80) [ 5889.477950] SMP: stopping secondary CPUs [ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95 [ 5890.522951] Starting crashdump kernel... |
| CVE-2024-26880 | In the Linux kernel, the following vulnerability has been resolved: dm: call the resume method on internal suspend There is this reported crash when experimenting with the lvm2 testsuite. The list corruption is caused by the fact that the postsuspend and resume methods were not paired correctly; there were two consecutive calls to the origin_postsuspend function. The second call attempts to remove the "hash_list" entry from a list, while it was already removed by the first call. Fix __dm_internal_resume so that it calls the preresume and resume methods of the table's targets. If a preresume method of some target fails, we are in a tricky situation. We can't return an error because dm_internal_resume isn't supposed to return errors. We can't return success, because then the "resume" and "postsuspend" methods would not be paired correctly. So, we set the DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace tools, but it won't cause a kernel crash. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP: 0010:__list_del_entry_valid_or_report+0x77/0xc0 <snip> RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282 RAX: 000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058 R10: 0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001 R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0 FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0 Call Trace: <TASK> ? die+0x2d/0x80 ? do_trap+0xeb/0xf0 ? __list_del_entry_valid_or_report+0x77/0xc0 ? do_error_trap+0x60/0x80 ? __list_del_entry_valid_or_report+0x77/0xc0 ? exc_invalid_op+0x49/0x60 ? __list_del_entry_valid_or_report+0x77/0xc0 ? asm_exc_invalid_op+0x16/0x20 ? table_deps+0x1b0/0x1b0 [dm_mod] ? __list_del_entry_valid_or_report+0x77/0xc0 origin_postsuspend+0x1a/0x50 [dm_snapshot] dm_table_postsuspend_targets+0x34/0x50 [dm_mod] dm_suspend+0xd8/0xf0 [dm_mod] dev_suspend+0x1f2/0x2f0 [dm_mod] ? table_deps+0x1b0/0x1b0 [dm_mod] ctl_ioctl+0x300/0x5f0 [dm_mod] dm_compat_ctl_ioctl+0x7/0x10 [dm_mod] __x64_compat_sys_ioctl+0x104/0x170 do_syscall_64+0x184/0x1b0 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0xf7e6aead <snip> ---[ end trace 0000000000000000 ]--- |
| CVE-2024-26879 | In the Linux kernel, the following vulnerability has been resolved: clk: meson: Add missing clocks to axg_clk_regmaps Some clocks were missing from axg_clk_regmaps, which caused kernel panic during cat /sys/kernel/debug/clk/clk_summary [ 57.349402] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001fc ... [ 57.430002] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 57.436900] pc : regmap_read+0x1c/0x88 [ 57.440608] lr : clk_regmap_gate_is_enabled+0x3c/0xb0 [ 57.445611] sp : ffff800082f1b690 [ 57.448888] x29: ffff800082f1b690 x28: 0000000000000000 x27: ffff800080eb9a70 [ 57.455961] x26: 0000000000000007 x25: 0000000000000016 x24: 0000000000000000 [ 57.463033] x23: ffff800080e8b488 x22: 0000000000000015 x21: ffff00000e7e7000 [ 57.470106] x20: ffff00000400ec00 x19: 0000000000000000 x18: ffffffffffffffff [ 57.477178] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000042a3000 [ 57.484251] x14: 0000000000000000 x13: ffff0000042a2fec x12: 0000000005f5e100 [ 57.491323] x11: abcc77118461cefd x10: 0000000000000020 x9 : ffff8000805e4b24 [ 57.498396] x8 : ffff0000028063c0 x7 : ffff800082f1b710 x6 : ffff800082f1b710 [ 57.505468] x5 : 00000000ffffffd0 x4 : ffff800082f1b6e0 x3 : 0000000000001000 [ 57.512541] x2 : ffff800082f1b6e4 x1 : 000000000000012c x0 : 0000000000000000 [ 57.519615] Call trace: [ 57.522030] regmap_read+0x1c/0x88 [ 57.525393] clk_regmap_gate_is_enabled+0x3c/0xb0 [ 57.530050] clk_core_is_enabled+0x44/0x120 [ 57.534190] clk_summary_show_subtree+0x154/0x2f0 [ 57.538847] clk_summary_show_subtree+0x220/0x2f0 [ 57.543505] clk_summary_show_subtree+0x220/0x2f0 [ 57.548162] clk_summary_show_subtree+0x220/0x2f0 [ 57.552820] clk_summary_show_subtree+0x220/0x2f0 [ 57.557477] clk_summary_show_subtree+0x220/0x2f0 [ 57.562135] clk_summary_show_subtree+0x220/0x2f0 [ 57.566792] clk_summary_show_subtree+0x220/0x2f0 [ 57.571450] clk_summary_show+0x84/0xb8 [ 57.575245] seq_read_iter+0x1bc/0x4b8 [ 57.578954] seq_read+0x8c/0xd0 [ 57.582059] full_proxy_read+0x68/0xc8 [ 57.585767] vfs_read+0xb0/0x268 [ 57.588959] ksys_read+0x70/0x108 [ 57.592236] __arm64_sys_read+0x24/0x38 [ 57.596031] invoke_syscall+0x50/0x128 [ 57.599740] el0_svc_common.constprop.0+0x48/0xf8 [ 57.604397] do_el0_svc+0x28/0x40 [ 57.607675] el0_svc+0x34/0xb8 [ 57.610694] el0t_64_sync_handler+0x13c/0x158 [ 57.615006] el0t_64_sync+0x190/0x198 [ 57.618635] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (b941fc00) [ 57.624668] ---[ end trace 0000000000000000 ]--- [jbrunet: add missing Fixes tag] |
| CVE-2024-26878 | In the Linux kernel, the following vulnerability has been resolved: quota: Fix potential NULL pointer dereference Below race may cause NULL pointer dereference P1 P2 dquot_free_inode quota_off drop_dquot_ref remove_dquot_ref dquots = i_dquot(inode) dquots = i_dquot(inode) srcu_read_lock dquots[cnt]) != NULL (1) dquots[type] = NULL (2) spin_lock(&dquots[cnt]->dq_dqb_lock) (3) .... If dquot_free_inode(or other routines) checks inode's quota pointers (1) before quota_off sets it to NULL(2) and use it (3) after that, NULL pointer dereference will be triggered. So let's fix it by using a temporary pointer to avoid this issue. |
| CVE-2024-26877 | In the Linux kernel, the following vulnerability has been resolved: crypto: xilinx - call finalize with bh disabled When calling crypto_finalize_request, BH should be disabled to avoid triggering the following calltrace: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118 Modules linked in: cryptodev(O) CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G O 6.8.0-rc1-yocto-standard #323 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : crypto_finalize_request+0xa0/0x118 lr : crypto_finalize_request+0x104/0x118 sp : ffffffc085353ce0 x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688 x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00 x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000 x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0 x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8 x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001 x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000 x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000 Call trace: crypto_finalize_request+0xa0/0x118 crypto_finalize_aead_request+0x18/0x30 zynqmp_handle_aes_req+0xcc/0x388 crypto_pump_work+0x168/0x2d8 kthread_worker_fn+0xfc/0x3a0 kthread+0x118/0x138 ret_from_fork+0x10/0x20 irq event stamp: 40 hardirqs last enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0 hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90 softirqs last enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0 softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0 ---[ end trace 0000000000000000 ]--- |
| CVE-2024-26876 | In the Linux kernel, the following vulnerability has been resolved: drm/bridge: adv7511: fix crash on irq during probe Moved IRQ registration down to end of adv7511_probe(). If an IRQ already is pending during adv7511_probe (before adv7511_cec_init) then cec_received_msg_ts could crash using uninitialized data: Unable to handle kernel read from unreadable memory at virtual address 00000000000003d5 Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP Call trace: cec_received_msg_ts+0x48/0x990 [cec] adv7511_cec_irq_process+0x1cc/0x308 [adv7511] adv7511_irq_process+0xd8/0x120 [adv7511] adv7511_irq_handler+0x1c/0x30 [adv7511] irq_thread_fn+0x30/0xa0 irq_thread+0x14c/0x238 kthread+0x190/0x1a8 |
| CVE-2024-26875 | In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix uaf in pvr2_context_set_notify [Syzbot reported] BUG: KASAN: slab-use-after-free in pvr2_context_set_notify+0x2c4/0x310 drivers/media/usb/pvrusb2/pvrusb2-context.c:35 Read of size 4 at addr ffff888113aeb0d8 by task kworker/1:1/26 CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.8.0-rc1-syzkaller-00046-gf1a27f081c1f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Workqueue: usb_hub_wq hub_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc4/0x620 mm/kasan/report.c:488 kasan_report+0xda/0x110 mm/kasan/report.c:601 pvr2_context_set_notify+0x2c4/0x310 drivers/media/usb/pvrusb2/pvrusb2-context.c:35 pvr2_context_notify drivers/media/usb/pvrusb2/pvrusb2-context.c:95 [inline] pvr2_context_disconnect+0x94/0xb0 drivers/media/usb/pvrusb2/pvrusb2-context.c:272 Freed by task 906: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3f/0x60 mm/kasan/generic.c:640 poison_slab_object mm/kasan/common.c:241 [inline] __kasan_slab_free+0x106/0x1b0 mm/kasan/common.c:257 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2121 [inline] slab_free mm/slub.c:4299 [inline] kfree+0x105/0x340 mm/slub.c:4409 pvr2_context_check drivers/media/usb/pvrusb2/pvrusb2-context.c:137 [inline] pvr2_context_thread_func+0x69d/0x960 drivers/media/usb/pvrusb2/pvrusb2-context.c:158 [Analyze] Task A set disconnect_flag = !0, which resulted in Task B's condition being met and releasing mp, leading to this issue. [Fix] Place the disconnect_flag assignment operation after all code in pvr2_context_disconnect() to avoid this issue. |
| CVE-2024-26874 | In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip It's possible that mtk_crtc->event is NULL in mtk_drm_crtc_finish_page_flip(). pending_needs_vblank value is set by mtk_crtc->event, but in mtk_drm_crtc_atomic_flush(), it's is not guarded by the same lock in mtk_drm_finish_page_flip(), thus a race condition happens. Consider the following case: CPU1 CPU2 step 1: mtk_drm_crtc_atomic_begin() mtk_crtc->event is not null, step 1: mtk_drm_crtc_atomic_flush: mtk_drm_crtc_update_config( !!mtk_crtc->event) step 2: mtk_crtc_ddp_irq -> mtk_drm_finish_page_flip: lock mtk_crtc->event set to null, pending_needs_vblank set to false unlock pending_needs_vblank set to true, step 2: mtk_crtc_ddp_irq -> mtk_drm_finish_page_flip called again, pending_needs_vblank is still true //null pointer Instead of guarding the entire mtk_drm_crtc_atomic_flush(), it's more efficient to just check if mtk_crtc->event is null before use. |
| CVE-2024-26873 | In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Fix a deadlock issue related to automatic dump If we issue a disabling PHY command, the device attached with it will go offline, if a 2 bit ECC error occurs at the same time, a hung task may be found: [ 4613.652388] INFO: task kworker/u256:0:165233 blocked for more than 120 seconds. [ 4613.666297] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4613.674809] task:kworker/u256:0 state:D stack: 0 pid:165233 ppid: 2 flags:0x00000208 [ 4613.683959] Workqueue: 0000:74:02.0_disco_q sas_revalidate_domain [libsas] [ 4613.691518] Call trace: [ 4613.694678] __switch_to+0xf8/0x17c [ 4613.698872] __schedule+0x660/0xee0 [ 4613.703063] schedule+0xac/0x240 [ 4613.706994] schedule_timeout+0x500/0x610 [ 4613.711705] __down+0x128/0x36c [ 4613.715548] down+0x240/0x2d0 [ 4613.719221] hisi_sas_internal_abort_timeout+0x1bc/0x260 [hisi_sas_main] [ 4613.726618] sas_execute_internal_abort+0x144/0x310 [libsas] [ 4613.732976] sas_execute_internal_abort_dev+0x44/0x60 [libsas] [ 4613.739504] hisi_sas_internal_task_abort_dev.isra.0+0xbc/0x1b0 [hisi_sas_main] [ 4613.747499] hisi_sas_dev_gone+0x174/0x250 [hisi_sas_main] [ 4613.753682] sas_notify_lldd_dev_gone+0xec/0x2e0 [libsas] [ 4613.759781] sas_unregister_common_dev+0x4c/0x7a0 [libsas] [ 4613.765962] sas_destruct_devices+0xb8/0x120 [libsas] [ 4613.771709] sas_do_revalidate_domain.constprop.0+0x1b8/0x31c [libsas] [ 4613.778930] sas_revalidate_domain+0x60/0xa4 [libsas] [ 4613.784716] process_one_work+0x248/0x950 [ 4613.789424] worker_thread+0x318/0x934 [ 4613.793878] kthread+0x190/0x200 [ 4613.797810] ret_from_fork+0x10/0x18 [ 4613.802121] INFO: task kworker/u256:4:316722 blocked for more than 120 seconds. [ 4613.816026] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4613.824538] task:kworker/u256:4 state:D stack: 0 pid:316722 ppid: 2 flags:0x00000208 [ 4613.833670] Workqueue: 0000:74:02.0 hisi_sas_rst_work_handler [hisi_sas_main] [ 4613.841491] Call trace: [ 4613.844647] __switch_to+0xf8/0x17c [ 4613.848852] __schedule+0x660/0xee0 [ 4613.853052] schedule+0xac/0x240 [ 4613.856984] schedule_timeout+0x500/0x610 [ 4613.861695] __down+0x128/0x36c [ 4613.865542] down+0x240/0x2d0 [ 4613.869216] hisi_sas_controller_prereset+0x58/0x1fc [hisi_sas_main] [ 4613.876324] hisi_sas_rst_work_handler+0x40/0x8c [hisi_sas_main] [ 4613.883019] process_one_work+0x248/0x950 [ 4613.887732] worker_thread+0x318/0x934 [ 4613.892204] kthread+0x190/0x200 [ 4613.896118] ret_from_fork+0x10/0x18 [ 4613.900423] INFO: task kworker/u256:1:348985 blocked for more than 121 seconds. [ 4613.914341] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4613.922852] task:kworker/u256:1 state:D stack: 0 pid:348985 ppid: 2 flags:0x00000208 [ 4613.931984] Workqueue: 0000:74:02.0_event_q sas_port_event_worker [libsas] [ 4613.939549] Call trace: [ 4613.942702] __switch_to+0xf8/0x17c [ 4613.946892] __schedule+0x660/0xee0 [ 4613.951083] schedule+0xac/0x240 [ 4613.955015] schedule_timeout+0x500/0x610 [ 4613.959725] wait_for_common+0x200/0x610 [ 4613.964349] wait_for_completion+0x3c/0x5c [ 4613.969146] flush_workqueue+0x198/0x790 [ 4613.973776] sas_porte_broadcast_rcvd+0x1e8/0x320 [libsas] [ 4613.979960] sas_port_event_worker+0x54/0xa0 [libsas] [ 4613.985708] process_one_work+0x248/0x950 [ 4613.990420] worker_thread+0x318/0x934 [ 4613.994868] kthread+0x190/0x200 [ 4613.998800] ret_from_fork+0x10/0x18 This is because when the device goes offline, we obtain the hisi_hba semaphore and send the ABORT_DEV command to the device. However, the internal abort timed out due to the 2 bit ECC error and triggers automatic dump. In addition, since the hisi_hba semaphore has been obtained, the dump cannot be executed and the controller cannot be reset. Therefore, the deadlocks occur on the following circular dependencies ---truncated--- |
| CVE-2024-26872 | In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Do not register event handler until srpt device is fully setup Upon rare occasions, KASAN reports a use-after-free Write in srpt_refresh_port(). This seems to be because an event handler is registered before the srpt device is fully setup and a race condition upon error may leave a partially setup event handler in place. Instead, only register the event handler after srpt device initialization is complete. |
| CVE-2024-26871 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix NULL pointer dereference in f2fs_submit_page_write() BUG: kernel NULL pointer dereference, address: 0000000000000014 RIP: 0010:f2fs_submit_page_write+0x6cf/0x780 [f2fs] Call Trace: <TASK> ? show_regs+0x6e/0x80 ? __die+0x29/0x70 ? page_fault_oops+0x154/0x4a0 ? prb_read_valid+0x20/0x30 ? __irq_work_queue_local+0x39/0xd0 ? irq_work_queue+0x36/0x70 ? do_user_addr_fault+0x314/0x6c0 ? exc_page_fault+0x7d/0x190 ? asm_exc_page_fault+0x2b/0x30 ? f2fs_submit_page_write+0x6cf/0x780 [f2fs] ? f2fs_submit_page_write+0x736/0x780 [f2fs] do_write_page+0x50/0x170 [f2fs] f2fs_outplace_write_data+0x61/0xb0 [f2fs] f2fs_do_write_data_page+0x3f8/0x660 [f2fs] f2fs_write_single_data_page+0x5bb/0x7a0 [f2fs] f2fs_write_cache_pages+0x3da/0xbe0 [f2fs] ... It is possible that other threads have added this fio to io->bio and submitted the io->bio before entering f2fs_submit_page_write(). At this point io->bio = NULL. If is_end_zone_blkaddr(sbi, fio->new_blkaddr) of this fio is true, then an NULL pointer dereference error occurs at bio_get(io->bio). The original code for determining zone end was after "out:", which would have missed some fio who is zone end. I've moved this code before "skip:" to make sure it's done for each fio. |
| CVE-2024-26870 | In the Linux kernel, the following vulnerability has been resolved: NFSv4.2: fix nfs4_listxattr kernel BUG at mm/usercopy.c:102 A call to listxattr() with a buffer size = 0 returns the actual size of the buffer needed for a subsequent call. When size > 0, nfs4_listxattr() does not return an error because either generic_listxattr() or nfs4_listxattr_nfs4_label() consumes exactly all the bytes then size is 0 when calling nfs4_listxattr_nfs4_user() which then triggers the following kernel BUG: [ 99.403778] kernel BUG at mm/usercopy.c:102! [ 99.404063] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 99.408463] CPU: 0 PID: 3310 Comm: python3 Not tainted 6.6.0-61.fc40.aarch64 #1 [ 99.415827] Call trace: [ 99.415985] usercopy_abort+0x70/0xa0 [ 99.416227] __check_heap_object+0x134/0x158 [ 99.416505] check_heap_object+0x150/0x188 [ 99.416696] __check_object_size.part.0+0x78/0x168 [ 99.416886] __check_object_size+0x28/0x40 [ 99.417078] listxattr+0x8c/0x120 [ 99.417252] path_listxattr+0x78/0xe0 [ 99.417476] __arm64_sys_listxattr+0x28/0x40 [ 99.417723] invoke_syscall+0x78/0x100 [ 99.417929] el0_svc_common.constprop.0+0x48/0xf0 [ 99.418186] do_el0_svc+0x24/0x38 [ 99.418376] el0_svc+0x3c/0x110 [ 99.418554] el0t_64_sync_handler+0x120/0x130 [ 99.418788] el0t_64_sync+0x194/0x198 [ 99.418994] Code: aa0003e3 d000a3e0 91310000 97f49bdb (d4210000) Issue is reproduced when generic_listxattr() returns 'system.nfs4_acl', thus calling lisxattr() with size = 16 will trigger the bug. Add check on nfs4_listxattr() to return ERANGE error when it is called with size > 0 and the return value is greater than size. |
| CVE-2024-26869 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate meta inode pages forcely Below race case can cause data corruption: Thread A GC thread - gc_data_segment - ra_data_block - locked meta_inode page - f2fs_inplace_write_data - invalidate_mapping_pages : fail to invalidate meta_inode page due to lock failure or dirty|writeback status - f2fs_submit_page_bio : write last dirty data to old blkaddr - move_data_block - load old data from meta_inode page - f2fs_submit_page_write : write old data to new blkaddr Because invalidate_mapping_pages() will skip invalidating page which has unclear status including locked, dirty, writeback and so on, so we need to use truncate_inode_pages_range() instead of invalidate_mapping_pages() to make sure meta_inode page will be dropped. |
| CVE-2024-26868 | In the Linux kernel, the following vulnerability has been resolved: nfs: fix panic when nfs4_ff_layout_prepare_ds() fails We've been seeing the following panic in production BUG: kernel NULL pointer dereference, address: 0000000000000065 PGD 2f485f067 P4D 2f485f067 PUD 2cc5d8067 PMD 0 RIP: 0010:ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles] Call Trace: <TASK> ? __die+0x78/0xc0 ? page_fault_oops+0x286/0x380 ? __rpc_execute+0x2c3/0x470 [sunrpc] ? rpc_new_task+0x42/0x1c0 [sunrpc] ? exc_page_fault+0x5d/0x110 ? asm_exc_page_fault+0x22/0x30 ? ff_layout_free_layoutreturn+0x110/0x110 [nfs_layout_flexfiles] ? ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles] ? ff_layout_cancel_io+0x6f/0x90 [nfs_layout_flexfiles] pnfs_mark_matching_lsegs_return+0x1b0/0x360 [nfsv4] pnfs_error_mark_layout_for_return+0x9e/0x110 [nfsv4] ? ff_layout_send_layouterror+0x50/0x160 [nfs_layout_flexfiles] nfs4_ff_layout_prepare_ds+0x11f/0x290 [nfs_layout_flexfiles] ff_layout_pg_init_write+0xf0/0x1f0 [nfs_layout_flexfiles] __nfs_pageio_add_request+0x154/0x6c0 [nfs] nfs_pageio_add_request+0x26b/0x380 [nfs] nfs_do_writepage+0x111/0x1e0 [nfs] nfs_writepages_callback+0xf/0x30 [nfs] write_cache_pages+0x17f/0x380 ? nfs_pageio_init_write+0x50/0x50 [nfs] ? nfs_writepages+0x6d/0x210 [nfs] ? nfs_writepages+0x6d/0x210 [nfs] nfs_writepages+0x125/0x210 [nfs] do_writepages+0x67/0x220 ? generic_perform_write+0x14b/0x210 filemap_fdatawrite_wbc+0x5b/0x80 file_write_and_wait_range+0x6d/0xc0 nfs_file_fsync+0x81/0x170 [nfs] ? nfs_file_mmap+0x60/0x60 [nfs] __x64_sys_fsync+0x53/0x90 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Inspecting the core with drgn I was able to pull this >>> prog.crashed_thread().stack_trace()[0] #0 at 0xffffffffa079657a (ff_layout_cancel_io+0x3a/0x84) in ff_layout_cancel_io at fs/nfs/flexfilelayout/flexfilelayout.c:2021:27 >>> prog.crashed_thread().stack_trace()[0]['idx'] (u32)1 >>> prog.crashed_thread().stack_trace()[0]['flseg'].mirror_array[1].mirror_ds (struct nfs4_ff_layout_ds *)0xffffffffffffffed This is clear from the stack trace, we call nfs4_ff_layout_prepare_ds() which could error out initializing the mirror_ds, and then we go to clean it all up and our check is only for if (!mirror->mirror_ds). This is inconsistent with the rest of the users of mirror_ds, which have if (IS_ERR_OR_NULL(mirror_ds)) to keep from tripping over this exact scenario. Fix this up in ff_layout_cancel_io() to make sure we don't panic when we get an error. I also spot checked all the other instances of checking mirror_ds and we appear to be doing the correct checks everywhere, only unconditionally dereferencing mirror_ds when we know it would be valid. |
| CVE-2024-26867 | In the Linux kernel, the following vulnerability has been resolved: comedi: comedi_8255: Correct error in subdevice initialization The refactoring done in commit 5c57b1ccecc7 ("comedi: comedi_8255: Rework subdevice initialization functions") to the initialization of the io field of struct subdev_8255_private broke all cards using the drivers/comedi/drivers/comedi_8255.c module. Prior to 5c57b1ccecc7, __subdev_8255_init() initialized the io field in the newly allocated struct subdev_8255_private to the non-NULL callback given to the function, otherwise it used a flag parameter to select between subdev_8255_mmio and subdev_8255_io. The refactoring removed that logic and the flag, as subdev_8255_mm_init() and subdev_8255_io_init() now explicitly pass subdev_8255_mmio and subdev_8255_io respectively to __subdev_8255_init(), only __subdev_8255_init() never sets spriv->io to the supplied callback. That spriv->io is NULL leads to a later BUG: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 1 PID: 1210 Comm: systemd-udevd Not tainted 6.7.3-x86_64 #1 Hardware name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00 RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000 R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8 FS: 00007f72f4e8f500(0000) GS:ffff91f8d5c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000010540e000 CR4: 00000000000406f0 Call Trace: <TASK> ? __die_body+0x15/0x57 ? page_fault_oops+0x2ef/0x33c ? insert_vmap_area.constprop.0+0xb6/0xd5 ? alloc_vmap_area+0x529/0x5ee ? exc_page_fault+0x15a/0x489 ? asm_exc_page_fault+0x22/0x30 __subdev_8255_init+0x79/0x8d [comedi_8255] pci_8255_auto_attach+0x11a/0x139 [8255_pci] comedi_auto_config+0xac/0x117 [comedi] ? __pfx___driver_attach+0x10/0x10 pci_device_probe+0x88/0xf9 really_probe+0x101/0x248 __driver_probe_device+0xbb/0xed driver_probe_device+0x1a/0x72 __driver_attach+0xd4/0xed bus_for_each_dev+0x76/0xb8 bus_add_driver+0xbe/0x1be driver_register+0x9a/0xd8 comedi_pci_driver_register+0x28/0x48 [comedi_pci] ? __pfx_pci_8255_driver_init+0x10/0x10 [8255_pci] do_one_initcall+0x72/0x183 do_init_module+0x5b/0x1e8 init_module_from_file+0x86/0xac __do_sys_finit_module+0x151/0x218 do_syscall_64+0x72/0xdb entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f72f50a0cb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 47 71 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffd47e512d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000562dd06ae070 RCX: 00007f72f50a0cb9 RDX: 0000000000000000 RSI: 00007f72f52d32df RDI: 000000000000000e RBP: 0000000000000000 R08: 00007f72f5168b20 R09: 0000000000000000 R10: 0000000000000050 R11: 0000000000000246 R12: 00007f72f52d32df R13: 0000000000020000 R14: 0000562dd06785c0 R15: 0000562dcfd0e9a8 </TASK> Modules linked in: 8255_pci(+) comedi_8255 comedi_pci comedi intel_gtt e100(+) acpi_cpufreq rtc_cmos usbhid CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00 RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000 R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8 FS: ---truncated--- |
| CVE-2024-26866 | In the Linux kernel, the following vulnerability has been resolved: spi: lpspi: Avoid potential use-after-free in probe() fsl_lpspi_probe() is allocating/disposing memory manually with spi_alloc_host()/spi_alloc_target(), but uses devm_spi_register_controller(). In case of error after the latter call the memory will be explicitly freed in the probe function by spi_controller_put() call, but used afterwards by "devm" management outside probe() (spi_unregister_controller() <- devm_spi_unregister() below). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070 ... Call trace: kernfs_find_ns kernfs_find_and_get_ns sysfs_remove_group sysfs_remove_groups device_remove_attrs device_del spi_unregister_controller devm_spi_unregister release_nodes devres_release_all really_probe driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork |
| CVE-2024-26865 | In the Linux kernel, the following vulnerability has been resolved: rds: tcp: Fix use-after-free of net in reqsk_timer_handler(). syzkaller reported a warning of netns tracker [0] followed by KASAN splat [1] and another ref tracker warning [1]. syzkaller could not find a repro, but in the log, the only suspicious sequence was as follows: 18:26:22 executing program 1: r0 = socket$inet6_mptcp(0xa, 0x1, 0x106) ... connect$inet6(r0, &(0x7f0000000080)={0xa, 0x4001, 0x0, @loopback}, 0x1c) (async) The notable thing here is 0x4001 in connect(), which is RDS_TCP_PORT. So, the scenario would be: 1. unshare(CLONE_NEWNET) creates a per netns tcp listener in rds_tcp_listen_init(). 2. syz-executor connect()s to it and creates a reqsk. 3. syz-executor exit()s immediately. 4. netns is dismantled. [0] 5. reqsk timer is fired, and UAF happens while freeing reqsk. [1] 6. listener is freed after RCU grace period. [2] Basically, reqsk assumes that the listener guarantees netns safety until all reqsk timers are expired by holding the listener's refcount. However, this was not the case for kernel sockets. Commit 740ea3c4a0b2 ("tcp: Clean up kernel listener's reqsk in inet_twsk_purge()") fixed this issue only for per-netns ehash. Let's apply the same fix for the global ehash. [0]: ref_tracker: net notrefcnt@0000000065449cc3 has 1/1 users at sk_alloc (./include/net/net_namespace.h:337 net/core/sock.c:2146) inet6_create (net/ipv6/af_inet6.c:192 net/ipv6/af_inet6.c:119) __sock_create (net/socket.c:1572) rds_tcp_listen_init (net/rds/tcp_listen.c:279) rds_tcp_init_net (net/rds/tcp.c:577) ops_init (net/core/net_namespace.c:137) setup_net (net/core/net_namespace.c:340) copy_net_ns (net/core/net_namespace.c:497) create_new_namespaces (kernel/nsproxy.c:110) unshare_nsproxy_namespaces (kernel/nsproxy.c:228 (discriminator 4)) ksys_unshare (kernel/fork.c:3429) __x64_sys_unshare (kernel/fork.c:3496) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) ... WARNING: CPU: 0 PID: 27 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179) [1]: BUG: KASAN: slab-use-after-free in inet_csk_reqsk_queue_drop (./include/net/inet_hashtables.h:180 net/ipv4/inet_connection_sock.c:952 net/ipv4/inet_connection_sock.c:966) Read of size 8 at addr ffff88801b370400 by task swapper/0/0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) print_report (mm/kasan/report.c:378 mm/kasan/report.c:488) kasan_report (mm/kasan/report.c:603) inet_csk_reqsk_queue_drop (./include/net/inet_hashtables.h:180 net/ipv4/inet_connection_sock.c:952 net/ipv4/inet_connection_sock.c:966) reqsk_timer_handler (net/ipv4/inet_connection_sock.c:979 net/ipv4/inet_connection_sock.c:1092) call_timer_fn (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/timer.h:127 kernel/time/timer.c:1701) __run_timers.part.0 (kernel/time/timer.c:1752 kernel/time/timer.c:2038) run_timer_softirq (kernel/time/timer.c:2053) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554) irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632 kernel/softirq.c:644) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1076 (discriminator 14)) </IRQ> Allocated by task 258 on cpu 0 at 83.612050s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) __kasan_slab_alloc (mm/kasan/common.c:343) kmem_cache_alloc (mm/slub.c:3813 mm/slub.c:3860 mm/slub.c:3867) copy_net_ns (./include/linux/slab.h:701 net/core/net_namespace.c:421 net/core/net_namespace.c:480) create_new_namespaces (kernel/nsproxy.c:110) unshare_nsproxy_name ---truncated--- |
| CVE-2024-26864 | In the Linux kernel, the following vulnerability has been resolved: tcp: Fix refcnt handling in __inet_hash_connect(). syzbot reported a warning in sk_nulls_del_node_init_rcu(). The commit 66b60b0c8c4a ("dccp/tcp: Unhash sk from ehash for tb2 alloc failure after check_estalblished().") tried to fix an issue that an unconnected socket occupies an ehash entry when bhash2 allocation fails. In such a case, we need to revert changes done by check_established(), which does not hold refcnt when inserting socket into ehash. So, to revert the change, we need to __sk_nulls_add_node_rcu() instead of sk_nulls_add_node_rcu(). Otherwise, sock_put() will cause refcnt underflow and leak the socket. [0]: WARNING: CPU: 0 PID: 23948 at include/net/sock.h:799 sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799 Modules linked in: CPU: 0 PID: 23948 Comm: syz-executor.2 Not tainted 6.8.0-rc6-syzkaller-00159-gc055fc00c07b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 RIP: 0010:sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799 Code: e8 7f 71 c6 f7 83 fb 02 7c 25 e8 35 6d c6 f7 4d 85 f6 0f 95 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 1b 6d c6 f7 90 <0f> 0b 90 eb b2 e8 10 6d c6 f7 4c 89 e7 be 04 00 00 00 e8 63 e7 d2 RSP: 0018:ffffc900032d7848 EFLAGS: 00010246 RAX: ffffffff89cd0035 RBX: 0000000000000001 RCX: 0000000000040000 RDX: ffffc90004de1000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 1ffff1100439ac26 R08: ffffffff89ccffe3 R09: 1ffff1100439ac28 R10: dffffc0000000000 R11: ffffed100439ac29 R12: ffff888021cd6140 R13: dffffc0000000000 R14: ffff88802a9bf5c0 R15: ffff888021cd6130 FS: 00007f3b823f16c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3b823f0ff8 CR3: 000000004674a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __inet_hash_connect+0x140f/0x20b0 net/ipv4/inet_hashtables.c:1139 dccp_v6_connect+0xcb9/0x1480 net/dccp/ipv6.c:956 __inet_stream_connect+0x262/0xf30 net/ipv4/af_inet.c:678 inet_stream_connect+0x65/0xa0 net/ipv4/af_inet.c:749 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f3b8167dda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3b823f10c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00007f3b817abf80 RCX: 00007f3b8167dda9 RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00007f3b823f1120 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 000000000000000b R14: 00007f3b817abf80 R15: 00007ffd3beb57b8 </TASK> |
| CVE-2024-26863 | In the Linux kernel, the following vulnerability has been resolved: hsr: Fix uninit-value access in hsr_get_node() KMSAN reported the following uninit-value access issue [1]: ===================================================== BUG: KMSAN: uninit-value in hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246 hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246 fill_frame_info net/hsr/hsr_forward.c:577 [inline] hsr_forward_skb+0xe12/0x30e0 net/hsr/hsr_forward.c:615 hsr_dev_xmit+0x1a1/0x270 net/hsr/hsr_device.c:223 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787 packet_alloc_skb net/packet/af_packet.c:2936 [inline] packet_snd net/packet/af_packet.c:3030 [inline] packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 1 PID: 5033 Comm: syz-executor334 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 ===================================================== If the packet type ID field in the Ethernet header is either ETH_P_PRP or ETH_P_HSR, but it is not followed by an HSR tag, hsr_get_skb_sequence_nr() reads an invalid value as a sequence number. This causes the above issue. This patch fixes the issue by returning NULL if the Ethernet header is not followed by an HSR tag. |
| CVE-2024-26862 | In the Linux kernel, the following vulnerability has been resolved: packet: annotate data-races around ignore_outgoing ignore_outgoing is read locklessly from dev_queue_xmit_nit() and packet_getsockopt() Add appropriate READ_ONCE()/WRITE_ONCE() annotations. syzbot reported: BUG: KCSAN: data-race in dev_queue_xmit_nit / packet_setsockopt write to 0xffff888107804542 of 1 bytes by task 22618 on cpu 0: packet_setsockopt+0xd83/0xfd0 net/packet/af_packet.c:4003 do_sock_setsockopt net/socket.c:2311 [inline] __sys_setsockopt+0x1d8/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0x66/0x80 net/socket.c:2340 do_syscall_64+0xd3/0x1d0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 read to 0xffff888107804542 of 1 bytes by task 27 on cpu 1: dev_queue_xmit_nit+0x82/0x620 net/core/dev.c:2248 xmit_one net/core/dev.c:3527 [inline] dev_hard_start_xmit+0xcc/0x3f0 net/core/dev.c:3547 __dev_queue_xmit+0xf24/0x1dd0 net/core/dev.c:4335 dev_queue_xmit include/linux/netdevice.h:3091 [inline] batadv_send_skb_packet+0x264/0x300 net/batman-adv/send.c:108 batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:392 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:420 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x3f0/0x4b0 net/batman-adv/bat_iv_ogm.c:1700 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x465/0x990 kernel/workqueue.c:3335 worker_thread+0x526/0x730 kernel/workqueue.c:3416 kthread+0x1d1/0x210 kernel/kthread.c:388 ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 value changed: 0x00 -> 0x01 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 27 Comm: kworker/u8:1 Tainted: G W 6.8.0-syzkaller-08073-g480e035fc4c7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet |
| CVE-2024-26861 | In the Linux kernel, the following vulnerability has been resolved: wireguard: receive: annotate data-race around receiving_counter.counter Syzkaller with KCSAN identified a data-race issue when accessing keypair->receiving_counter.counter. Use READ_ONCE() and WRITE_ONCE() annotations to mark the data race as intentional. BUG: KCSAN: data-race in wg_packet_decrypt_worker / wg_packet_rx_poll write to 0xffff888107765888 of 8 bytes by interrupt on cpu 0: counter_validate drivers/net/wireguard/receive.c:321 [inline] wg_packet_rx_poll+0x3ac/0xf00 drivers/net/wireguard/receive.c:461 __napi_poll+0x60/0x3b0 net/core/dev.c:6536 napi_poll net/core/dev.c:6605 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6738 __do_softirq+0xc4/0x279 kernel/softirq.c:553 do_softirq+0x5e/0x90 kernel/softirq.c:454 __local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x6c5/0x700 drivers/net/wireguard/receive.c:499 process_one_work kernel/workqueue.c:2633 [inline] ... read to 0xffff888107765888 of 8 bytes by task 3196 on cpu 1: decrypt_packet drivers/net/wireguard/receive.c:252 [inline] wg_packet_decrypt_worker+0x220/0x700 drivers/net/wireguard/receive.c:501 process_one_work kernel/workqueue.c:2633 [inline] process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706 worker_thread+0x525/0x730 kernel/workqueue.c:2787 ... |
| CVE-2024-26860 | In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix a memory leak when rechecking the data Memory for the "checksums" pointer will leak if the data is rechecked after checksum failure (because the associated kfree won't happen due to 'goto skip_io'). Fix this by freeing the checksums memory before recheck, and just use the "checksum_onstack" memory for storing checksum during recheck. |
| CVE-2024-26859 | In the Linux kernel, the following vulnerability has been resolved: net/bnx2x: Prevent access to a freed page in page_pool Fix race condition leading to system crash during EEH error handling During EEH error recovery, the bnx2x driver's transmit timeout logic could cause a race condition when handling reset tasks. The bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(), which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload() SGEs are freed using bnx2x_free_rx_sge_range(). However, this could overlap with the EEH driver's attempt to reset the device using bnx2x_io_slot_reset(), which also tries to free SGEs. This race condition can result in system crashes due to accessing freed memory locations in bnx2x_free_rx_sge() 799 static inline void bnx2x_free_rx_sge(struct bnx2x *bp, 800 struct bnx2x_fastpath *fp, u16 index) 801 { 802 struct sw_rx_page *sw_buf = &fp->rx_page_ring[index]; 803 struct page *page = sw_buf->page; .... where sw_buf was set to NULL after the call to dma_unmap_page() by the preceding thread. EEH: Beginning: 'slot_reset' PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset() bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing... bnx2x 0011:01:00.0: enabling device (0140 -> 0142) bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0080000025065fc Oops: Kernel access of bad area, sig: 11 [#1] ..... Call Trace: [c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable) [c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0 [c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550 [c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60 [c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170 [c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0 [c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64 To solve this issue, we need to verify page pool allocations before freeing. |
| CVE-2024-26858 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Use a memory barrier to enforce PTP WQ xmit submission tracking occurs after populating the metadata_map Just simply reordering the functions mlx5e_ptp_metadata_map_put and mlx5e_ptpsq_track_metadata in the mlx5e_txwqe_complete context is not good enough since both the compiler and CPU are free to reorder these two functions. If reordering does occur, the issue that was supposedly fixed by 7e3f3ba97e6c ("net/mlx5e: Track xmit submission to PTP WQ after populating metadata map") will be seen. This will lead to NULL pointer dereferences in mlx5e_ptpsq_mark_ts_cqes_undelivered in the NAPI polling context due to the tracking list being populated before the metadata map. |
| CVE-2024-26857 | In the Linux kernel, the following vulnerability has been resolved: geneve: make sure to pull inner header in geneve_rx() syzbot triggered a bug in geneve_rx() [1] Issue is similar to the one I fixed in commit 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") We have to save skb->network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb->head. [1] BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline] BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] geneve_rx drivers/net/geneve.c:279 [inline] geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346 __udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422 udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604 ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5534 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648 process_backlog+0x480/0x8b0 net/core/dev.c:5976 __napi_poll+0xe3/0x980 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x8b8/0x1870 net/core/dev.c:6778 __do_softirq+0x1b7/0x7c5 kernel/softirq.c:553 do_softirq+0x9a/0xf0 kernel/softirq.c:454 __local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline] __dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook mm/slub.c:3819 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x352/0x790 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1296 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b |
| CVE-2024-26856 | In the Linux kernel, the following vulnerability has been resolved: net: sparx5: Fix use after free inside sparx5_del_mact_entry Based on the static analyzis of the code it looks like when an entry from the MAC table was removed, the entry was still used after being freed. More precise the vid of the mac_entry was used after calling devm_kfree on the mac_entry. The fix consists in first using the vid of the mac_entry to delete the entry from the HW and after that to free it. |
| CVE-2024-26855 | In the Linux kernel, the following vulnerability has been resolved: net: ice: Fix potential NULL pointer dereference in ice_bridge_setlink() The function ice_bridge_setlink() may encounter a NULL pointer dereference if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently in nla_for_each_nested(). To address this issue, add a check to ensure that br_spec is not NULL before proceeding with the nested attribute iteration. |
| CVE-2024-26854 | In the Linux kernel, the following vulnerability has been resolved: ice: fix uninitialized dplls mutex usage The pf->dplls.lock mutex is initialized too late, after its first use. Move it to the top of ice_dpll_init. Note that the "err_exit" error path destroys the mutex. And the mutex is the last thing destroyed in ice_dpll_deinit. This fixes the following warning with CONFIG_DEBUG_MUTEXES: ice 0000:10:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.36.0 ice 0000:10:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link) ice 0000:10:00.0: PTP init successful ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 410 at kernel/locking/mutex.c:587 __mutex_lock+0x773/0xd40 Modules linked in: crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic ice(+) nvme nvme_c> CPU: 0 PID: 410 Comm: kworker/0:4 Not tainted 6.8.0-rc5+ #3 Hardware name: HPE ProLiant DL110 Gen10 Plus/ProLiant DL110 Gen10 Plus, BIOS U56 10/19/2023 Workqueue: events work_for_cpu_fn RIP: 0010:__mutex_lock+0x773/0xd40 Code: c0 0f 84 1d f9 ff ff 44 8b 35 0d 9c 69 01 45 85 f6 0f 85 0d f9 ff ff 48 c7 c6 12 a2 a9 85 48 c7 c7 12 f1 a> RSP: 0018:ff7eb1a3417a7ae0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000002 RSI: ffffffff85ac2bff RDI: 00000000ffffffff RBP: ff7eb1a3417a7b80 R08: 0000000000000000 R09: 00000000ffffbfff R10: ff7eb1a3417a7978 R11: ff32b80f7fd2e568 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff32b7f02c50e0d8 FS: 0000000000000000(0000) GS:ff32b80efe800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b5852cc000 CR3: 000000003c43a004 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x84/0x170 ? __mutex_lock+0x773/0xd40 ? report_bug+0x1c7/0x1d0 ? prb_read_valid+0x1b/0x30 ? handle_bug+0x42/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __mutex_lock+0x773/0xd40 ? rcu_is_watching+0x11/0x50 ? __kmalloc_node_track_caller+0x346/0x490 ? ice_dpll_lock_status_get+0x28/0x50 [ice] ? __pfx_ice_dpll_lock_status_get+0x10/0x10 [ice] ? ice_dpll_lock_status_get+0x28/0x50 [ice] ice_dpll_lock_status_get+0x28/0x50 [ice] dpll_device_get_one+0x14f/0x2e0 dpll_device_event_send+0x7d/0x150 dpll_device_register+0x124/0x180 ice_dpll_init_dpll+0x7b/0xd0 [ice] ice_dpll_init+0x224/0xa40 [ice] ? _dev_info+0x70/0x90 ice_load+0x468/0x690 [ice] ice_probe+0x75b/0xa10 [ice] ? _raw_spin_unlock_irqrestore+0x4f/0x80 ? process_one_work+0x1a3/0x500 local_pci_probe+0x47/0xa0 work_for_cpu_fn+0x17/0x30 process_one_work+0x20d/0x500 worker_thread+0x1df/0x3e0 ? __pfx_worker_thread+0x10/0x10 kthread+0x103/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> irq event stamp: 125197 hardirqs last enabled at (125197): [<ffffffff8416409d>] finish_task_switch.isra.0+0x12d/0x3d0 hardirqs last disabled at (125196): [<ffffffff85134044>] __schedule+0xea4/0x19f0 softirqs last enabled at (105334): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60 softirqs last disabled at (105332): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60 ---[ end trace 0000000000000000 ]--- |
| CVE-2024-26853 | In the Linux kernel, the following vulnerability has been resolved: igc: avoid returning frame twice in XDP_REDIRECT When a frame can not be transmitted in XDP_REDIRECT (e.g. due to a full queue), it is necessary to free it by calling xdp_return_frame_rx_napi. However, this is the responsibility of the caller of the ndo_xdp_xmit (see for example bq_xmit_all in kernel/bpf/devmap.c) and thus calling it inside igc_xdp_xmit (which is the ndo_xdp_xmit of the igc driver) as well will lead to memory corruption. In fact, bq_xmit_all expects that it can return all frames after the last successfully transmitted one. Therefore, break for the first not transmitted frame, but do not call xdp_return_frame_rx_napi in igc_xdp_xmit. This is equally implemented in other Intel drivers such as the igb. There are two alternatives to this that were rejected: 1. Return num_frames as all the frames would have been transmitted and release them inside igc_xdp_xmit. While it might work technically, it is not what the return value is meant to represent (i.e. the number of SUCCESSFULLY transmitted packets). 2. Rework kernel/bpf/devmap.c and all drivers to support non-consecutively dropped packets. Besides being complex, it likely has a negative performance impact without a significant gain since it is anyway unlikely that the next frame can be transmitted if the previous one was dropped. The memory corruption can be reproduced with the following script which leads to a kernel panic after a few seconds. It basically generates more traffic than a i225 NIC can transmit and pushes it via XDP_REDIRECT from a virtual interface to the physical interface where frames get dropped. #!/bin/bash INTERFACE=enp4s0 INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex` sudo ip link add dev veth1 type veth peer name veth2 sudo ip link set up $INTERFACE sudo ip link set up veth1 sudo ip link set up veth2 cat << EOF > redirect.bpf.c SEC("prog") int redirect(struct xdp_md *ctx) { return bpf_redirect($INTERFACE_IDX, 0); } char _license[] SEC("license") = "GPL"; EOF clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o sudo ip link set veth2 xdp obj redirect.bpf.o cat << EOF > pass.bpf.c SEC("prog") int pass(struct xdp_md *ctx) { return XDP_PASS; } char _license[] SEC("license") = "GPL"; EOF clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o sudo ip link set $INTERFACE xdp obj pass.bpf.o cat << EOF > trafgen.cfg { /* Ethernet Header */ 0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, const16(ETH_P_IP), /* IPv4 Header */ 0b01000101, 0, # IPv4 version, IHL, TOS const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header)) const16(2), # IPv4 ident 0b01000000, 0, # IPv4 flags, fragmentation off 64, # IPv4 TTL 17, # Protocol UDP csumip(14, 33), # IPv4 checksum /* UDP Header */ 10, 0, 1, 1, # IP Src - adapt as needed 10, 0, 1, 2, # IP Dest - adapt as needed const16(6666), # UDP Src Port const16(6666), # UDP Dest Port const16(1008), # UDP length (UDP header 8 bytes + payload length) csumudp(14, 34), # UDP checksum /* Payload */ fill('W', 1000), } EOF sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp |
| CVE-2024-26852 | In the Linux kernel, the following vulnerability has been resolved: net/ipv6: avoid possible UAF in ip6_route_mpath_notify() syzbot found another use-after-free in ip6_route_mpath_notify() [1] Commit f7225172f25a ("net/ipv6: prevent use after free in ip6_route_mpath_notify") was not able to fix the root cause. We need to defer the fib6_info_release() calls after ip6_route_mpath_notify(), in the cleanup phase. [1] BUG: KASAN: slab-use-after-free in rt6_fill_node+0x1460/0x1ac0 Read of size 4 at addr ffff88809a07fc64 by task syz-executor.2/23037 CPU: 0 PID: 23037 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-01035-gea7f3cfaa588 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x167/0x540 mm/kasan/report.c:488 kasan_report+0x142/0x180 mm/kasan/report.c:601 rt6_fill_node+0x1460/0x1ac0 inet6_rt_notify+0x13b/0x290 net/ipv6/route.c:6184 ip6_route_mpath_notify net/ipv6/route.c:5198 [inline] ip6_route_multipath_add net/ipv6/route.c:5404 [inline] inet6_rtm_newroute+0x1d0f/0x2300 net/ipv6/route.c:5517 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f73dd87dda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f73de6550c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f73dd9ac050 RCX: 00007f73dd87dda9 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005 RBP: 00007f73dd8ca47a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f73dd9ac050 R15: 00007ffdbdeb7858 </TASK> Allocated by task 23037: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:372 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:389 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:3981 [inline] __kmalloc+0x22e/0x490 mm/slub.c:3994 kmalloc include/linux/slab.h:594 [inline] kzalloc include/linux/slab.h:711 [inline] fib6_info_alloc+0x2e/0xf0 net/ipv6/ip6_fib.c:155 ip6_route_info_create+0x445/0x12b0 net/ipv6/route.c:3758 ip6_route_multipath_add net/ipv6/route.c:5298 [inline] inet6_rtm_newroute+0x744/0x2300 net/ipv6/route.c:5517 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 Freed by task 16: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x4e/0x60 mm/kasan/generic.c:640 poison_slab_object+0xa6/0xe0 m ---truncated--- |
| CVE-2024-26851 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: Add protection for bmp length out of range UBSAN load reports an exception of BRK#5515 SHIFT_ISSUE:Bitwise shifts that are out of bounds for their data type. vmlinux get_bitmap(b=75) + 712 <net/netfilter/nf_conntrack_h323_asn1.c:0> vmlinux decode_seq(bs=0xFFFFFFD008037000, f=0xFFFFFFD008037018, level=134443100) + 1956 <net/netfilter/nf_conntrack_h323_asn1.c:592> vmlinux decode_choice(base=0xFFFFFFD0080370F0, level=23843636) + 1216 <net/netfilter/nf_conntrack_h323_asn1.c:814> vmlinux decode_seq(f=0xFFFFFFD0080371A8, level=134443500) + 812 <net/netfilter/nf_conntrack_h323_asn1.c:576> vmlinux decode_choice(base=0xFFFFFFD008037280, level=0) + 1216 <net/netfilter/nf_conntrack_h323_asn1.c:814> vmlinux DecodeRasMessage() + 304 <net/netfilter/nf_conntrack_h323_asn1.c:833> vmlinux ras_help() + 684 <net/netfilter/nf_conntrack_h323_main.c:1728> vmlinux nf_confirm() + 188 <net/netfilter/nf_conntrack_proto.c:137> Due to abnormal data in skb->data, the extension bitmap length exceeds 32 when decoding ras message then uses the length to make a shift operation. It will change into negative after several loop. UBSAN load could detect a negative shift as an undefined behaviour and reports exception. So we add the protection to avoid the length exceeding 32. Or else it will return out of range error and stop decoding. |
| CVE-2024-26850 | In the Linux kernel, the following vulnerability has been resolved: mm/debug_vm_pgtable: fix BUG_ON with pud advanced test Architectures like powerpc add debug checks to ensure we find only devmap PUD pte entries. These debug checks are only done with CONFIG_DEBUG_VM. This patch marks the ptes used for PUD advanced test devmap pte entries so that we don't hit on debug checks on architecture like ppc64 as below. WARNING: CPU: 2 PID: 1 at arch/powerpc/mm/book3s64/radix_pgtable.c:1382 radix__pud_hugepage_update+0x38/0x138 .... NIP [c0000000000a7004] radix__pud_hugepage_update+0x38/0x138 LR [c0000000000a77a8] radix__pudp_huge_get_and_clear+0x28/0x60 Call Trace: [c000000004a2f950] [c000000004a2f9a0] 0xc000000004a2f9a0 (unreliable) [c000000004a2f980] [000d34c100000000] 0xd34c100000000 [c000000004a2f9a0] [c00000000206ba98] pud_advanced_tests+0x118/0x334 [c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48 [c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388 Also kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:202! .... NIP [c000000000096510] pudp_huge_get_and_clear_full+0x98/0x174 LR [c00000000206bb34] pud_advanced_tests+0x1b4/0x334 Call Trace: [c000000004a2f950] [000d34c100000000] 0xd34c100000000 (unreliable) [c000000004a2f9a0] [c00000000206bb34] pud_advanced_tests+0x1b4/0x334 [c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48 [c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388 |
| CVE-2024-26849 | In the Linux kernel, the following vulnerability has been resolved: netlink: add nla be16/32 types to minlen array BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline] BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline] BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline] BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631 nla_validate_range_unsigned lib/nlattr.c:222 [inline] nla_validate_int_range lib/nlattr.c:336 [inline] validate_nla lib/nlattr.c:575 [inline] ... The message in question matches this policy: [NFTA_TARGET_REV] = NLA_POLICY_MAX(NLA_BE32, 255), but because NLA_BE32 size in minlen array is 0, the validation code will read past the malformed (too small) attribute. Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing: those likely should be added too. |
| CVE-2024-26848 | In the Linux kernel, the following vulnerability has been resolved: afs: Fix endless loop in directory parsing If a directory has a block with only ".__afsXXXX" files in it (from uncompleted silly-rename), these .__afsXXXX files are skipped but without advancing the file position in the dir_context. This leads to afs_dir_iterate() repeating the block again and again. Fix this by making the code that skips the .__afsXXXX file also manually advance the file position. The symptoms are a soft lookup: watchdog: BUG: soft lockup - CPU#3 stuck for 52s! [check:5737] ... RIP: 0010:afs_dir_iterate_block+0x39/0x1fd ... ? watchdog_timer_fn+0x1a6/0x213 ... ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? afs_dir_iterate_block+0x39/0x1fd afs_dir_iterate+0x10a/0x148 afs_readdir+0x30/0x4a iterate_dir+0x93/0xd3 __do_sys_getdents64+0x6b/0xd4 This is almost certainly the actual fix for: https://bugzilla.kernel.org/show_bug.cgi?id=218496 |
| CVE-2024-26847 | In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas: use correct function name for resetting TCE tables The PAPR spec spells the function name as "ibm,reset-pe-dma-windows" but in practice firmware uses the singular form: "ibm,reset-pe-dma-window" in the device tree. Since we have the wrong spelling in the RTAS function table, reverse lookups (token -> name) fail and warn: unexpected failed lookup for token 86 WARNING: CPU: 1 PID: 545 at arch/powerpc/kernel/rtas.c:659 __do_enter_rtas_trace+0x2a4/0x2b4 CPU: 1 PID: 545 Comm: systemd-udevd Not tainted 6.8.0-rc4 #30 Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NL1060_028) hv:phyp pSeries NIP [c0000000000417f0] __do_enter_rtas_trace+0x2a4/0x2b4 LR [c0000000000417ec] __do_enter_rtas_trace+0x2a0/0x2b4 Call Trace: __do_enter_rtas_trace+0x2a0/0x2b4 (unreliable) rtas_call+0x1f8/0x3e0 enable_ddw.constprop.0+0x4d0/0xc84 dma_iommu_dma_supported+0xe8/0x24c dma_set_mask+0x5c/0xd8 mlx5_pci_init.constprop.0+0xf0/0x46c [mlx5_core] probe_one+0xfc/0x32c [mlx5_core] local_pci_probe+0x68/0x12c pci_call_probe+0x68/0x1ec pci_device_probe+0xbc/0x1a8 really_probe+0x104/0x570 __driver_probe_device+0xb8/0x224 driver_probe_device+0x54/0x130 __driver_attach+0x158/0x2b0 bus_for_each_dev+0xa8/0x120 driver_attach+0x34/0x48 bus_add_driver+0x174/0x304 driver_register+0x8c/0x1c4 __pci_register_driver+0x68/0x7c mlx5_init+0xb8/0x118 [mlx5_core] do_one_initcall+0x60/0x388 do_init_module+0x7c/0x2a4 init_module_from_file+0xb4/0x108 idempotent_init_module+0x184/0x34c sys_finit_module+0x90/0x114 And oopses are possible when lockdep is enabled or the RTAS tracepoints are active, since those paths dereference the result of the lookup. Use the correct spelling to match firmware's behavior, adjusting the related constants to match. |
| CVE-2024-26846 | In the Linux kernel, the following vulnerability has been resolved: nvme-fc: do not wait in vain when unloading module The module exit path has race between deleting all controllers and freeing 'left over IDs'. To prevent double free a synchronization between nvme_delete_ctrl and ida_destroy has been added by the initial commit. There is some logic around trying to prevent from hanging forever in wait_for_completion, though it does not handling all cases. E.g. blktests is able to reproduce the situation where the module unload hangs forever. If we completely rely on the cleanup code executed from the nvme_delete_ctrl path, all IDs will be freed eventually. This makes calling ida_destroy unnecessary. We only have to ensure that all nvme_delete_ctrl code has been executed before we leave nvme_fc_exit_module. This is done by flushing the nvme_delete_wq workqueue. While at it, remove the unused nvme_fc_wq workqueue too. |
| CVE-2024-26845 | In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Add TMF to tmr_list handling An abort that is responded to by iSCSI itself is added to tmr_list but does not go to target core. A LUN_RESET that goes through tmr_list takes a refcounter on the abort and waits for completion. However, the abort will be never complete because it was not started in target core. Unable to locate ITT: 0x05000000 on CID: 0 Unable to locate RefTaskTag: 0x05000000 on CID: 0. wait_for_tasks: Stopping tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop wait for tasks: tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop ... INFO: task kworker/0:2:49 blocked for more than 491 seconds. task:kworker/0:2 state:D stack: 0 pid: 49 ppid: 2 flags:0x00000800 Workqueue: events target_tmr_work [target_core_mod] Call Trace: __switch_to+0x2c4/0x470 _schedule+0x314/0x1730 schedule+0x64/0x130 schedule_timeout+0x168/0x430 wait_for_completion+0x140/0x270 target_put_cmd_and_wait+0x64/0xb0 [target_core_mod] core_tmr_lun_reset+0x30/0xa0 [target_core_mod] target_tmr_work+0xc8/0x1b0 [target_core_mod] process_one_work+0x2d4/0x5d0 worker_thread+0x78/0x6c0 To fix this, only add abort to tmr_list if it will be handled by target core. |
| CVE-2024-26844 | In the Linux kernel, the following vulnerability has been resolved: block: Fix WARNING in _copy_from_iter Syzkaller reports a warning in _copy_from_iter because an iov_iter is supposedly used in the wrong direction. The reason is that syzcaller managed to generate a request with a transfer direction of SG_DXFER_TO_FROM_DEV. This instructs the kernel to copy user buffers into the kernel, read into the copied buffers and then copy the data back to user space. Thus the iovec is used in both directions. Detect this situation in the block layer and construct a new iterator with the correct direction for the copy-in. |
| CVE-2024-26843 | In the Linux kernel, the following vulnerability has been resolved: efi: runtime: Fix potential overflow of soft-reserved region size md_size will have been narrowed if we have >= 4GB worth of pages in a soft-reserved region. |
| CVE-2024-26842 | In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix shift issue in ufshcd_clear_cmd() When task_tag >= 32 (in MCQ mode) and sizeof(unsigned int) == 4, 1U << task_tag will out of bounds for a u32 mask. Fix this up to prevent SHIFT_ISSUE (bitwise shifts that are out of bounds for their data type). [name:debug_monitors&]Unexpected kernel BRK exception at EL1 [name:traps&]Internal error: BRK handler: 00000000f2005514 [#1] PREEMPT SMP [name:mediatek_cpufreq_hw&]cpufreq stop DVFS log done [name:mrdump&]Kernel Offset: 0x1ba5800000 from 0xffffffc008000000 [name:mrdump&]PHYS_OFFSET: 0x80000000 [name:mrdump&]pstate: 22400005 (nzCv daif +PAN -UAO) [name:mrdump&]pc : [0xffffffdbaf52bb2c] ufshcd_clear_cmd+0x280/0x288 [name:mrdump&]lr : [0xffffffdbaf52a774] ufshcd_wait_for_dev_cmd+0x3e4/0x82c [name:mrdump&]sp : ffffffc0081471b0 <snip> Workqueue: ufs_eh_wq_0 ufshcd_err_handler Call trace: dump_backtrace+0xf8/0x144 show_stack+0x18/0x24 dump_stack_lvl+0x78/0x9c dump_stack+0x18/0x44 mrdump_common_die+0x254/0x480 [mrdump] ipanic_die+0x20/0x30 [mrdump] notify_die+0x15c/0x204 die+0x10c/0x5f8 arm64_notify_die+0x74/0x13c do_debug_exception+0x164/0x26c el1_dbg+0x64/0x80 el1h_64_sync_handler+0x3c/0x90 el1h_64_sync+0x68/0x6c ufshcd_clear_cmd+0x280/0x288 ufshcd_wait_for_dev_cmd+0x3e4/0x82c ufshcd_exec_dev_cmd+0x5bc/0x9ac ufshcd_verify_dev_init+0x84/0x1c8 ufshcd_probe_hba+0x724/0x1ce0 ufshcd_host_reset_and_restore+0x260/0x574 ufshcd_reset_and_restore+0x138/0xbd0 ufshcd_err_handler+0x1218/0x2f28 process_one_work+0x5fc/0x1140 worker_thread+0x7d8/0xe20 kthread+0x25c/0x468 ret_from_fork+0x10/0x20 |
| CVE-2024-26841 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: Update cpu_sibling_map when disabling nonboot CPUs Update cpu_sibling_map when disabling nonboot CPUs by defining & calling clear_cpu_sibling_map(), otherwise we get such errors on SMT systems: jump label: negative count! WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100 CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20 a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280 a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001 t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000 t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964 t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8 s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040 s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006 ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1c (LIE=2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000 90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0 900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001 0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0 0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f 6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000 900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000 0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4 0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c ... Call Trace: [<9000000000224528>] show_stack+0x48/0x1a0 [<900000000179afc8>] dump_stack_lvl+0x78/0xa0 [<9000000000263ed0>] __warn+0x90/0x1a0 [<90000000017419b8>] report_bug+0x1b8/0x280 [<900000000179c564>] do_bp+0x264/0x420 [<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100 [<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300 [<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0 [<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240 [<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0 [<900000000029a720>] kthread+0x140/0x160 [<9000000000222288>] ret_from_kernel_thread+0xc/0xa4 |
| CVE-2024-26840 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix memory leak in cachefiles_add_cache() The following memory leak was reported after unbinding /dev/cachefiles: ================================================================== unreferenced object 0xffff9b674176e3c0 (size 192): comm "cachefilesd2", pid 680, jiffies 4294881224 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc ea38a44b): [<ffffffff8eb8a1a5>] kmem_cache_alloc+0x2d5/0x370 [<ffffffff8e917f86>] prepare_creds+0x26/0x2e0 [<ffffffffc002eeef>] cachefiles_determine_cache_security+0x1f/0x120 [<ffffffffc00243ec>] cachefiles_add_cache+0x13c/0x3a0 [<ffffffffc0025216>] cachefiles_daemon_write+0x146/0x1c0 [<ffffffff8ebc4a3b>] vfs_write+0xcb/0x520 [<ffffffff8ebc5069>] ksys_write+0x69/0xf0 [<ffffffff8f6d4662>] do_syscall_64+0x72/0x140 [<ffffffff8f8000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 ================================================================== Put the reference count of cache_cred in cachefiles_daemon_unbind() to fix the problem. And also put cache_cred in cachefiles_add_cache() error branch to avoid memory leaks. |
| CVE-2024-26839 | In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix a memleak in init_credit_return When dma_alloc_coherent fails to allocate dd->cr_base[i].va, init_credit_return should deallocate dd->cr_base and dd->cr_base[i] that allocated before. Or those resources would be never freed and a memleak is triggered. |
| CVE-2024-26838 | In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix KASAN issue with tasklet KASAN testing revealed the following issue assocated with freeing an IRQ. [50006.466686] Call Trace: [50006.466691] <IRQ> [50006.489538] dump_stack+0x5c/0x80 [50006.493475] print_address_description.constprop.6+0x1a/0x150 [50006.499872] ? irdma_sc_process_ceq+0x483/0x790 [irdma] [50006.505742] ? irdma_sc_process_ceq+0x483/0x790 [irdma] [50006.511644] kasan_report.cold.11+0x7f/0x118 [50006.516572] ? irdma_sc_process_ceq+0x483/0x790 [irdma] [50006.522473] irdma_sc_process_ceq+0x483/0x790 [irdma] [50006.528232] irdma_process_ceq+0xb2/0x400 [irdma] [50006.533601] ? irdma_hw_flush_wqes_callback+0x370/0x370 [irdma] [50006.540298] irdma_ceq_dpc+0x44/0x100 [irdma] [50006.545306] tasklet_action_common.isra.14+0x148/0x2c0 [50006.551096] __do_softirq+0x1d0/0xaf8 [50006.555396] irq_exit_rcu+0x219/0x260 [50006.559670] irq_exit+0xa/0x20 [50006.563320] smp_apic_timer_interrupt+0x1bf/0x690 [50006.568645] apic_timer_interrupt+0xf/0x20 [50006.573341] </IRQ> The issue is that a tasklet could be pending on another core racing the delete of the irq. Fix by insuring any scheduled tasklet is killed after deleting the irq. |
| CVE-2024-26837 | In the Linux kernel, the following vulnerability has been resolved: net: bridge: switchdev: Skip MDB replays of deferred events on offload Before this change, generation of the list of MDB events to replay would race against the creation of new group memberships, either from the IGMP/MLD snooping logic or from user configuration. While new memberships are immediately visible to walkers of br->mdb_list, the notification of their existence to switchdev event subscribers is deferred until a later point in time. So if a replay list was generated during a time that overlapped with such a window, it would also contain a replay of the not-yet-delivered event. The driver would thus receive two copies of what the bridge internally considered to be one single event. On destruction of the bridge, only a single membership deletion event was therefore sent. As a consequence of this, drivers which reference count memberships (at least DSA), would be left with orphan groups in their hardware database when the bridge was destroyed. This is only an issue when replaying additions. While deletion events may still be pending on the deferred queue, they will already have been removed from br->mdb_list, so no duplicates can be generated in that scenario. To a user this meant that old group memberships, from a bridge in which a port was previously attached, could be reanimated (in hardware) when the port joined a new bridge, without the new bridge's knowledge. For example, on an mv88e6xxx system, create a snooping bridge and immediately add a port to it: root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \ > ip link set dev x3 up master br0 And then destroy the bridge: root@infix-06-0b-00:~$ ip link del dev br0 root@infix-06-0b-00:~$ mvls atu ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a DEV:0 Marvell 88E6393X 33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . . 33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . . ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a root@infix-06-0b-00:~$ The two IPv6 groups remain in the hardware database because the port (x3) is notified of the host's membership twice: once via the original event and once via a replay. Since only a single delete notification is sent, the count remains at 1 when the bridge is destroyed. Then add the same port (or another port belonging to the same hardware domain) to a new bridge, this time with snooping disabled: root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \ > ip link set dev x3 up master br1 All multicast, including the two IPv6 groups from br0, should now be flooded, according to the policy of br1. But instead the old memberships are still active in the hardware database, causing the switch to only forward traffic to those groups towards the CPU (port 0). Eliminate the race in two steps: 1. Grab the write-side lock of the MDB while generating the replay list. This prevents new memberships from showing up while we are generating the replay list. But it leaves the scenario in which a deferred event was already generated, but not delivered, before we grabbed the lock. Therefore: 2. Make sure that no deferred version of a replay event is already enqueued to the switchdev deferred queue, before adding it to the replay list, when replaying additions. |
| CVE-2024-26836 | In the Linux kernel, the following vulnerability has been resolved: platform/x86: think-lmi: Fix password opcode ordering for workstations The Lenovo workstations require the password opcode to be run before the attribute value is changed (if Admin password is enabled). Tested on some Thinkpads to confirm they are OK with this order too. |
| CVE-2024-26835 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: set dormant flag on hook register failure We need to set the dormant flag again if we fail to register the hooks. During memory pressure hook registration can fail and we end up with a table marked as active but no registered hooks. On table/base chain deletion, nf_tables will attempt to unregister the hook again which yields a warn splat from the nftables core. |
| CVE-2024-26834 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_flow_offload: release dst in case direct xmit path is used Direct xmit does not use it since it calls dev_queue_xmit() to send packets, hence it calls dst_release(). kmemleak reports: unreferenced object 0xffff88814f440900 (size 184): comm "softirq", pid 0, jiffies 4294951896 hex dump (first 32 bytes): 00 60 5b 04 81 88 ff ff 00 e6 e8 82 ff ff ff ff .`[............. 21 0b 50 82 ff ff ff ff 00 00 00 00 00 00 00 00 !.P............. backtrace (crc cb2bf5d6): [<000000003ee17107>] kmem_cache_alloc+0x286/0x340 [<0000000021a5de2c>] dst_alloc+0x43/0xb0 [<00000000f0671159>] rt_dst_alloc+0x2e/0x190 [<00000000fe5092c9>] __mkroute_output+0x244/0x980 [<000000005fb96fb0>] ip_route_output_flow+0xc0/0x160 [<0000000045367433>] nf_ip_route+0xf/0x30 [<0000000085da1d8e>] nf_route+0x2d/0x60 [<00000000d1ecd1cb>] nft_flow_route+0x171/0x6a0 [nft_flow_offload] [<00000000d9b2fb60>] nft_flow_offload_eval+0x4e8/0x700 [nft_flow_offload] [<000000009f447dbb>] expr_call_ops_eval+0x53/0x330 [nf_tables] [<00000000072e1be6>] nft_do_chain+0x17c/0x840 [nf_tables] [<00000000d0551029>] nft_do_chain_inet+0xa1/0x210 [nf_tables] [<0000000097c9d5c6>] nf_hook_slow+0x5b/0x160 [<0000000005eccab1>] ip_forward+0x8b6/0x9b0 [<00000000553a269b>] ip_rcv+0x221/0x230 [<00000000412872e5>] __netif_receive_skb_one_core+0xfe/0x110 |
| CVE-2024-26833 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix memory leak in dm_sw_fini() After destroying dmub_srv, the memory associated with it is not freed, causing a memory leak: unreferenced object 0xffff896302b45800 (size 1024): comm "(udev-worker)", pid 222, jiffies 4294894636 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 6265fd77): [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340 [<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu] [<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu] [<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu] [<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu] [<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu] [<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90 [<ffffffff996918a3>] pci_device_probe+0xc3/0x230 [<ffffffff99805872>] really_probe+0xe2/0x480 [<ffffffff99805c98>] __driver_probe_device+0x78/0x160 [<ffffffff99805daf>] driver_probe_device+0x1f/0x90 [<ffffffff9980601e>] __driver_attach+0xce/0x1c0 [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0 [<ffffffff99804822>] bus_add_driver+0x112/0x210 [<ffffffff99807245>] driver_register+0x55/0x100 [<ffffffff990012d1>] do_one_initcall+0x41/0x300 Fix this by freeing dmub_srv after destroying it. |
| CVE-2024-26832 | In the Linux kernel, the following vulnerability has been resolved: mm: zswap: fix missing folio cleanup in writeback race path In zswap_writeback_entry(), after we get a folio from __read_swap_cache_async(), we grab the tree lock again to check that the swap entry was not invalidated and recycled. If it was, we delete the folio we just added to the swap cache and exit. However, __read_swap_cache_async() returns the folio locked when it is newly allocated, which is always true for this path, and the folio is ref'd. Make sure to unlock and put the folio before returning. This was discovered by code inspection, probably because this path handles a race condition that should not happen often, and the bug would not crash the system, it will only strand the folio indefinitely. |
| CVE-2024-26831 | In the Linux kernel, the following vulnerability has been resolved: net/handshake: Fix handshake_req_destroy_test1 Recently, handshake_req_destroy_test1 started failing: Expected handshake_req_destroy_test == req, but handshake_req_destroy_test == 0000000000000000 req == 0000000060f99b40 not ok 11 req_destroy works This is because "sock_release(sock)" was replaced with "fput(filp)" to address a memory leak. Note that sock_release() is synchronous but fput() usually delays the final close and clean-up. The delay is not consequential in the other cases that were changed but handshake_req_destroy_test1 is testing that handshake_req_cancel() followed by closing the file actually does call the ->hp_destroy method. Thus the PTR_EQ test at the end has to be sure that the final close is complete before it checks the pointer. We cannot use a completion here because if ->hp_destroy is never called (ie, there is an API bug) then the test will hang. Reported by: Guenter Roeck <[email protected]> |
| CVE-2024-26830 | In the Linux kernel, the following vulnerability has been resolved: i40e: Do not allow untrusted VF to remove administratively set MAC Currently when PF administratively sets VF's MAC address and the VF is put down (VF tries to delete all MACs) then the MAC is removed from MAC filters and primary VF MAC is zeroed. Do not allow untrusted VF to remove primary MAC when it was set administratively by PF. Reproducer: 1) Create VF 2) Set VF interface up 3) Administratively set the VF's MAC 4) Put VF interface down [root@host ~]# echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs [root@host ~]# ip link set enp2s0f0v0 up [root@host ~]# ip link set enp2s0f0 vf 0 mac fe:6c:b5:da:c7:7d [root@host ~]# ip link show enp2s0f0 23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff vf 0 link/ether fe:6c:b5:da:c7:7d brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off [root@host ~]# ip link set enp2s0f0v0 down [root@host ~]# ip link show enp2s0f0 23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off |
| CVE-2024-26829 | In the Linux kernel, the following vulnerability has been resolved: media: ir_toy: fix a memleak in irtoy_tx When irtoy_command fails, buf should be freed since it is allocated by irtoy_tx, or there is a memleak. |
| CVE-2024-26828 | In the Linux kernel, the following vulnerability has been resolved: cifs: fix underflow in parse_server_interfaces() In this loop, we step through the buffer and after each item we check if the size_left is greater than the minimum size we need. However, the problem is that "bytes_left" is type ssize_t while sizeof() is type size_t. That means that because of type promotion, the comparison is done as an unsigned and if we have negative bytes left the loop continues instead of ending. |
| CVE-2024-26826 | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix data re-injection from stale subflow When the MPTCP PM detects that a subflow is stale, all the packet scheduler must re-inject all the mptcp-level unacked data. To avoid acquiring unneeded locks, it first try to check if any unacked data is present at all in the RTX queue, but such check is currently broken, as it uses TCP-specific helper on an MPTCP socket. Funnily enough fuzzers and static checkers are happy, as the accessed memory still belongs to the mptcp_sock struct, and even from a functional perspective the recovery completed successfully, as the short-cut test always failed. A recent unrelated TCP change - commit d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables") - exposed the issue, as the tcp field reorganization makes the mptcp code always skip the re-inection. Fix the issue dropping the bogus call: we are on a slow path, the early optimization proved once again to be evil. |
| CVE-2024-26825 | In the Linux kernel, the following vulnerability has been resolved: nfc: nci: free rx_data_reassembly skb on NCI device cleanup rx_data_reassembly skb is stored during NCI data exchange for processing fragmented packets. It is dropped only when the last fragment is processed or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received. However, the NCI device may be deallocated before that which leads to skb leak. As by design the rx_data_reassembly skb is bound to the NCI device and nothing prevents the device to be freed before the skb is processed in some way and cleaned, free it on the NCI device cleanup. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| CVE-2024-26824 | In the Linux kernel, the following vulnerability has been resolved: crypto: algif_hash - Remove bogus SGL free on zero-length error path When a zero-length message is hashed by algif_hash, and an error is triggered, it tries to free an SG list that was never allocated in the first place. Fix this by not freeing the SG list on the zero-length error path. |
| CVE-2024-26823 | In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems While refactoring the way the ITSs are probed, the handling of quirks applicable to ACPI-based platforms was lost. As a result, systems such as HIP07 lose their GICv4 functionnality, and some other may even fail to boot, unless they are configured to boot with DT. Move the enabling of quirks into its_probe_one(), making it common to all firmware implementations. |
| CVE-2024-26822 | In the Linux kernel, the following vulnerability has been resolved: smb: client: set correct id, uid and cruid for multiuser automounts When uid, gid and cruid are not specified, we need to dynamically set them into the filesystem context used for automounting otherwise they'll end up reusing the values from the parent mount. |
| CVE-2024-26820 | In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER handler cannot perform VF register successfully as the register call is received before netvsc_probe is finished. This is because we register register_netdevice_notifier() very early( even before vmbus_driver_register()). To fix this, we try to register each such matching VF( if it is visible as a netdevice) at the end of netvsc_probe. |
| CVE-2024-26818 | In the Linux kernel, the following vulnerability has been resolved: tools/rtla: Fix clang warning about mount_point var size clang is reporting this warning: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c src/utils.c:548:66: warning: 'fscanf' may overflow; destination buffer in argument 3 has size 1024, but the corresponding specifier may require size 1025 [-Wfortify-source] 548 | while (fscanf(fp, "%*s %" STR(MAX_PATH) "s %99s %*s %*d %*d\n", mount_point, type) == 2) { | ^ Increase mount_point variable size to MAX_PATH+1 to avoid the overflow. |
| CVE-2024-26817 | In the Linux kernel, the following vulnerability has been resolved: amdkfd: use calloc instead of kzalloc to avoid integer overflow This uses calloc instead of doing the multiplication which might overflow. |
| CVE-2024-26816 | In the Linux kernel, the following vulnerability has been resolved: x86, relocs: Ignore relocations in .notes section When building with CONFIG_XEN_PV=y, .text symbols are emitted into the .notes section so that Xen can find the "startup_xen" entry point. This information is used prior to booting the kernel, so relocations are not useful. In fact, performing relocations against the .notes section means that the KASLR base is exposed since /sys/kernel/notes is world-readable. To avoid leaking the KASLR base without breaking unprivileged tools that are expecting to read /sys/kernel/notes, skip performing relocations in the .notes section. The values readable in .notes are then identical to those found in System.map. |
| CVE-2024-26815 | In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: proper TCA_TAPRIO_TC_ENTRY_INDEX check taprio_parse_tc_entry() is not correctly checking TCA_TAPRIO_TC_ENTRY_INDEX attribute: int tc; // Signed value tc = nla_get_u32(tb[TCA_TAPRIO_TC_ENTRY_INDEX]); if (tc >= TC_QOPT_MAX_QUEUE) { NL_SET_ERR_MSG_MOD(extack, "TC entry index out of range"); return -ERANGE; } syzbot reported that it could fed arbitary negative values: UBSAN: shift-out-of-bounds in net/sched/sch_taprio.c:1722:18 shift exponent -2147418108 is negative CPU: 0 PID: 5066 Comm: syz-executor367 Not tainted 6.8.0-rc7-syzkaller-00136-gc8a5c731fd12 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_shift_out_of_bounds+0x3c7/0x420 lib/ubsan.c:386 taprio_parse_tc_entry net/sched/sch_taprio.c:1722 [inline] taprio_parse_tc_entries net/sched/sch_taprio.c:1768 [inline] taprio_change+0xb87/0x57d0 net/sched/sch_taprio.c:1877 taprio_init+0x9da/0xc80 net/sched/sch_taprio.c:2134 qdisc_create+0x9d4/0x1190 net/sched/sch_api.c:1355 tc_modify_qdisc+0xa26/0x1e40 net/sched/sch_api.c:1776 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6617 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f1b2dea3759 Code: 48 83 c4 28 c3 e8 d7 19 00 00 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd4de452f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f1b2def0390 RCX: 00007f1b2dea3759 RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000004 RBP: 0000000000000003 R08: 0000555500000000 R09: 0000555500000000 R10: 0000555500000000 R11: 0000000000000246 R12: 00007ffd4de45340 R13: 00007ffd4de45310 R14: 0000000000000001 R15: 00007ffd4de45340 |
| CVE-2024-26814 | In the Linux kernel, the following vulnerability has been resolved: vfio/fsl-mc: Block calling interrupt handler without trigger The eventfd_ctx trigger pointer of the vfio_fsl_mc_irq object is initially NULL and may become NULL if the user sets the trigger eventfd to -1. The interrupt handler itself is guaranteed that trigger is always valid between request_irq() and free_irq(), but the loopback testing mechanisms to invoke the handler function need to test the trigger. The triggering and setting ioctl paths both make use of igate and are therefore mutually exclusive. The vfio-fsl-mc driver does not make use of irqfds, nor does it support any sort of masking operations, therefore unlike vfio-pci and vfio-platform, the flow can remain essentially unchanged. |
| CVE-2024-26813 | In the Linux kernel, the following vulnerability has been resolved: vfio/platform: Create persistent IRQ handlers The vfio-platform SET_IRQS ioctl currently allows loopback triggering of an interrupt before a signaling eventfd has been configured by the user, which thereby allows a NULL pointer dereference. Rather than register the IRQ relative to a valid trigger, register all IRQs in a disabled state in the device open path. This allows mask operations on the IRQ to nest within the overall enable state governed by a valid eventfd signal. This decouples @masked, protected by the @locked spinlock from @trigger, protected via the @igate mutex. In doing so, it's guaranteed that changes to @trigger cannot race the IRQ handlers because the IRQ handler is synchronously disabled before modifying the trigger, and loopback triggering of the IRQ via ioctl is safe due to serialization with trigger changes via igate. For compatibility, request_irq() failures are maintained to be local to the SET_IRQS ioctl rather than a fatal error in the open device path. This allows, for example, a userspace driver with polling mode support to continue to work regardless of moving the request_irq() call site. This necessarily blocks all SET_IRQS access to the failed index. |
| CVE-2024-26812 | In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Create persistent INTx handler A vulnerability exists where the eventfd for INTx signaling can be deconfigured, which unregisters the IRQ handler but still allows eventfds to be signaled with a NULL context through the SET_IRQS ioctl or through unmask irqfd if the device interrupt is pending. Ideally this could be solved with some additional locking; the igate mutex serializes the ioctl and config space accesses, and the interrupt handler is unregistered relative to the trigger, but the irqfd path runs asynchronous to those. The igate mutex cannot be acquired from the atomic context of the eventfd wake function. Disabling the irqfd relative to the eventfd registration is potentially incompatible with existing userspace. As a result, the solution implemented here moves configuration of the INTx interrupt handler to track the lifetime of the INTx context object and irq_type configuration, rather than registration of a particular trigger eventfd. Synchronization is added between the ioctl path and eventfd_signal() wrapper such that the eventfd trigger can be dynamically updated relative to in-flight interrupts or irqfd callbacks. |
| CVE-2024-26811 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate payload size in ipc response If installing malicious ksmbd-tools, ksmbd.mountd can return invalid ipc response to ksmbd kernel server. ksmbd should validate payload size of ipc response from ksmbd.mountd to avoid memory overrun or slab-out-of-bounds. This patch validate 3 ipc response that has payload. |
| CVE-2024-26810 | In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Lock external INTx masking ops Mask operations through config space changes to DisINTx may race INTx configuration changes via ioctl. Create wrappers that add locking for paths outside of the core interrupt code. In particular, irq_type is updated holding igate, therefore testing is_intx() requires holding igate. For example clearing DisINTx from config space can otherwise race changes of the interrupt configuration. This aligns interfaces which may trigger the INTx eventfd into two camps, one side serialized by igate and the other only enabled while INTx is configured. A subsequent patch introduces synchronization for the latter flows. |
| CVE-2024-26809 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: release elements in clone only from destroy path Clone already always provides a current view of the lookup table, use it to destroy the set, otherwise it is possible to destroy elements twice. This fix requires: 212ed75dc5fb ("netfilter: nf_tables: integrate pipapo into commit protocol") which came after: 9827a0e6e23b ("netfilter: nft_set_pipapo: release elements in clone from abort path"). |
| CVE-2024-26808 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain Remove netdevice from inet/ingress basechain in case NETDEV_UNREGISTER event is reported, otherwise a stale reference to netdevice remains in the hook list. |
| CVE-2024-26807 | In the Linux kernel, the following vulnerability has been resolved: Both cadence-quadspi ->runtime_suspend() and ->runtime_resume() implementations start with: struct cqspi_st *cqspi = dev_get_drvdata(dev); struct spi_controller *host = dev_get_drvdata(dev); This obviously cannot be correct, unless "struct cqspi_st" is the first member of " struct spi_controller", or the other way around, but it is not the case. "struct spi_controller" is allocated by devm_spi_alloc_host(), which allocates an extra amount of memory for private data, used to store "struct cqspi_st". The ->probe() function of the cadence-quadspi driver then sets the device drvdata to store the address of the "struct cqspi_st" structure. Therefore: struct cqspi_st *cqspi = dev_get_drvdata(dev); is correct, but: struct spi_controller *host = dev_get_drvdata(dev); is not, as it makes "host" point not to a "struct spi_controller" but to the same "struct cqspi_st" structure as above. This obviously leads to bad things (memory corruption, kernel crashes) directly during ->probe(), as ->probe() enables the device using PM runtime, leading the ->runtime_resume() hook being called, which in turns calls spi_controller_resume() with the wrong pointer. This has at least been reported [0] to cause a kernel crash, but the exact behavior will depend on the memory contents. [0] https://lore.kernel.org/all/20240226121803.5a7r5wkpbbowcxgx@dhruva/ This issue potentially affects all platforms that are currently using the cadence-quadspi driver. |
| CVE-2024-26806 | In the Linux kernel, the following vulnerability has been resolved: spi: cadence-qspi: remove system-wide suspend helper calls from runtime PM hooks The ->runtime_suspend() and ->runtime_resume() callbacks are not expected to call spi_controller_suspend() and spi_controller_resume(). Remove calls to those in the cadence-qspi driver. Those helpers have two roles currently: - They stop/start the queue, including dealing with the kworker. - They toggle the SPI controller SPI_CONTROLLER_SUSPENDED flag. It requires acquiring ctlr->bus_lock_mutex. Step one is irrelevant because cadence-qspi is not queued. Step two however has two implications: - A deadlock occurs, because ->runtime_resume() is called in a context where the lock is already taken (in the ->exec_op() callback, where the usage count is incremented). - It would disallow all operations once the device is auto-suspended. Here is a brief call tree highlighting the mutex deadlock: spi_mem_exec_op() ... spi_mem_access_start() mutex_lock(&ctlr->bus_lock_mutex) cqspi_exec_mem_op() pm_runtime_resume_and_get() cqspi_resume() spi_controller_resume() mutex_lock(&ctlr->bus_lock_mutex) ... spi_mem_access_end() mutex_unlock(&ctlr->bus_lock_mutex) ... |
| CVE-2024-26805 | In the Linux kernel, the following vulnerability has been resolved: netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter syzbot reported the following uninit-value access issue [1]: netlink_to_full_skb() creates a new `skb` and puts the `skb->data` passed as a 1st arg of netlink_to_full_skb() onto new `skb`. The data size is specified as `len` and passed to skb_put_data(). This `len` is based on `skb->end` that is not data offset but buffer offset. The `skb->end` contains data and tailroom. Since the tailroom is not initialized when the new `skb` created, KMSAN detects uninitialized memory area when copying the data. This patch resolved this issue by correct the len from `skb->end` to `skb->len`, which is the actual data offset. BUG: KMSAN: kernel-infoleak-after-free in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak-after-free in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak-after-free in _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186 copy_to_iter include/linux/uio.h:197 [inline] simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:532 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:420 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] packet_recvmsg+0xd9c/0x2000 net/packet/af_packet.c:3482 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg net/socket.c:1066 [inline] sock_read_iter+0x467/0x580 net/socket.c:1136 call_read_iter include/linux/fs.h:2014 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x8f6/0xe00 fs/read_write.c:470 ksys_read+0x20f/0x4c0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x93/0xd0 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was stored to memory at: skb_put_data include/linux/skbuff.h:2622 [inline] netlink_to_full_skb net/netlink/af_netlink.c:181 [inline] __netlink_deliver_tap_skb net/netlink/af_netlink.c:298 [inline] __netlink_deliver_tap+0x5be/0xc90 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 [inline] netlink_deliver_tap_kernel net/netlink/af_netlink.c:347 [inline] netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x10f1/0x1250 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: free_pages_prepare mm/page_alloc.c:1087 [inline] free_unref_page_prepare+0xb0/0xa40 mm/page_alloc.c:2347 free_unref_page_list+0xeb/0x1100 mm/page_alloc.c:2533 release_pages+0x23d3/0x2410 mm/swap.c:1042 free_pages_and_swap_cache+0xd9/0xf0 mm/swap_state.c:316 tlb_batch_pages ---truncated--- |
| CVE-2024-26804 | In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: prevent perpetual headroom growth syzkaller triggered following kasan splat: BUG: KASAN: use-after-free in __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170 Read of size 1 at addr ffff88812fb4000e by task syz-executor183/5191 [..] kasan_report+0xda/0x110 mm/kasan/report.c:588 __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170 skb_flow_dissect_flow_keys include/linux/skbuff.h:1514 [inline] ___skb_get_hash net/core/flow_dissector.c:1791 [inline] __skb_get_hash+0xc7/0x540 net/core/flow_dissector.c:1856 skb_get_hash include/linux/skbuff.h:1556 [inline] ip_tunnel_xmit+0x1855/0x33c0 net/ipv4/ip_tunnel.c:748 ipip_tunnel_xmit+0x3cc/0x4e0 net/ipv4/ipip.c:308 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] neigh_connected_output+0x42c/0x5d0 net/core/neighbour.c:1592 ... ip_finish_output2+0x833/0x2550 net/ipv4/ip_output.c:235 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 .. iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1dbc/0x33c0 net/ipv4/ip_tunnel.c:831 ipgre_xmit+0x4a1/0x980 net/ipv4/ip_gre.c:665 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564 ... The splat occurs because skb->data points past skb->head allocated area. This is because neigh layer does: __skb_pull(skb, skb_network_offset(skb)); ... but skb_network_offset() returns a negative offset and __skb_pull() arg is unsigned. IOW, we skb->data gets "adjusted" by a huge value. The negative value is returned because skb->head and skb->data distance is more than 64k and skb->network_header (u16) has wrapped around. The bug is in the ip_tunnel infrastructure, which can cause dev->needed_headroom to increment ad infinitum. The syzkaller reproducer consists of packets getting routed via a gre tunnel, and route of gre encapsulated packets pointing at another (ipip) tunnel. The ipip encapsulation finds gre0 as next output device. This results in the following pattern: 1). First packet is to be sent out via gre0. Route lookup found an output device, ipip0. 2). ip_tunnel_xmit for gre0 bumps gre0->needed_headroom based on the future output device, rt.dev->needed_headroom (ipip0). 3). ip output / start_xmit moves skb on to ipip0. which runs the same code path again (xmit recursion). 4). Routing step for the post-gre0-encap packet finds gre0 as output device to use for ipip0 encapsulated packet. tunl0->needed_headroom is then incremented based on the (already bumped) gre0 device headroom. This repeats for every future packet: gre0->needed_headroom gets inflated because previous packets' ipip0 step incremented rt->dev (gre0) headroom, and ipip0 incremented because gre0 needed_headroom was increased. For each subsequent packet, gre/ipip0->needed_headroom grows until post-expand-head reallocations result in a skb->head/data distance of more than 64k. Once that happens, skb->network_header (u16) wraps around when pskb_expand_head tries to make sure that skb_network_offset() is unchanged after the headroom expansion/reallocation. After this skb_network_offset(skb) returns a different (and negative) result post headroom expansion. The next trip to neigh layer (or anything else that would __skb_pull the network header) makes skb->data point to a memory location outside skb->head area. v2: Cap the needed_headroom update to an arbitarily chosen upperlimit to prevent perpetual increase instead of dropping the headroom increment completely. |
| CVE-2024-26803 | In the Linux kernel, the following vulnerability has been resolved: net: veth: clear GRO when clearing XDP even when down veth sets NETIF_F_GRO automatically when XDP is enabled, because both features use the same NAPI machinery. The logic to clear NETIF_F_GRO sits in veth_disable_xdp() which is called both on ndo_stop and when XDP is turned off. To avoid the flag from being cleared when the device is brought down, the clearing is skipped when IFF_UP is not set. Bringing the device down should indeed not modify its features. Unfortunately, this means that clearing is also skipped when XDP is disabled _while_ the device is down. And there's nothing on the open path to bring the device features back into sync. IOW if user enables XDP, disables it and then brings the device up we'll end up with a stray GRO flag set but no NAPI instances. We don't depend on the GRO flag on the datapath, so the datapath won't crash. We will crash (or hang), however, next time features are sync'ed (either by user via ethtool or peer changing its config). The GRO flag will go away, and veth will try to disable the NAPIs. But the open path never created them since XDP was off, the GRO flag was a stray. If NAPI was initialized before we'll hang in napi_disable(). If it never was we'll crash trying to stop uninitialized hrtimer. Move the GRO flag updates to the XDP enable / disable paths, instead of mixing them with the ndo_open / ndo_close paths. |
| CVE-2024-26802 | In the Linux kernel, the following vulnerability has been resolved: stmmac: Clear variable when destroying workqueue Currently when suspending driver and stopping workqueue it is checked whether workqueue is not NULL and if so, it is destroyed. Function destroy_workqueue() does drain queue and does clear variable, but it does not set workqueue variable to NULL. This can cause kernel/module panic if code attempts to clear workqueue that was not initialized. This scenario is possible when resuming suspended driver in stmmac_resume(), because there is no handling for failed stmmac_hw_setup(), which can fail and return if DMA engine has failed to initialize, and workqueue is initialized after DMA engine. Should DMA engine fail to initialize, resume will proceed normally, but interface won't work and TX queue will eventually timeout, causing 'Reset adapter' error. This then does destroy workqueue during reset process. And since workqueue is initialized after DMA engine and can be skipped, it will cause kernel/module panic. To secure against this possible crash, set workqueue variable to NULL when destroying workqueue. Log/backtrace from crash goes as follows: [88.031977]------------[ cut here ]------------ [88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out [88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398 <Skipping backtrace for watchdog timeout> [88.032251]---[ end trace e70de432e4d5c2c0 ]--- [88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter. [88.036359]------------[ cut here ]------------ [88.036519]Call trace: [88.036523] flush_workqueue+0x3e4/0x430 [88.036528] drain_workqueue+0xc4/0x160 [88.036533] destroy_workqueue+0x40/0x270 [88.036537] stmmac_fpe_stop_wq+0x4c/0x70 [88.036541] stmmac_release+0x278/0x280 [88.036546] __dev_close_many+0xcc/0x158 [88.036551] dev_close_many+0xbc/0x190 [88.036555] dev_close.part.0+0x70/0xc0 [88.036560] dev_close+0x24/0x30 [88.036564] stmmac_service_task+0x110/0x140 [88.036569] process_one_work+0x1d8/0x4a0 [88.036573] worker_thread+0x54/0x408 [88.036578] kthread+0x164/0x170 [88.036583] ret_from_fork+0x10/0x20 [88.036588]---[ end trace e70de432e4d5c2c1 ]--- [88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 |
| CVE-2024-26801 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Avoid potential use-after-free in hci_error_reset While handling the HCI_EV_HARDWARE_ERROR event, if the underlying BT controller is not responding, the GPIO reset mechanism would free the hci_dev and lead to a use-after-free in hci_error_reset. Here's the call trace observed on a ChromeOS device with Intel AX201: queue_work_on+0x3e/0x6c __hci_cmd_sync_sk+0x2ee/0x4c0 [bluetooth <HASH:3b4a6>] ? init_wait_entry+0x31/0x31 __hci_cmd_sync+0x16/0x20 [bluetooth <HASH:3b4a 6>] hci_error_reset+0x4f/0xa4 [bluetooth <HASH:3b4a 6>] process_one_work+0x1d8/0x33f worker_thread+0x21b/0x373 kthread+0x13a/0x152 ? pr_cont_work+0x54/0x54 ? kthread_blkcg+0x31/0x31 ret_from_fork+0x1f/0x30 This patch holds the reference count on the hci_dev while processing a HCI_EV_HARDWARE_ERROR event to avoid potential crash. |
| CVE-2024-26800 | In the Linux kernel, the following vulnerability has been resolved: tls: fix use-after-free on failed backlog decryption When the decrypt request goes to the backlog and crypto_aead_decrypt returns -EBUSY, tls_do_decryption will wait until all async decryptions have completed. If one of them fails, tls_do_decryption will return -EBADMSG and tls_decrypt_sg jumps to the error path, releasing all the pages. But the pages have been passed to the async callback, and have already been released by tls_decrypt_done. The only true async case is when crypto_aead_decrypt returns -EINPROGRESS. With -EBUSY, we already waited so we can tell tls_sw_recvmsg that the data is available for immediate copy, but we need to notify tls_decrypt_sg (via the new ->async_done flag) that the memory has already been released. |
| CVE-2024-26799 | In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix uninitialized pointer dmactl In the case where __lpass_get_dmactl_handle is called and the driver id dai_id is invalid the pointer dmactl is not being assigned a value, and dmactl contains a garbage value since it has not been initialized and so the null check may not work. Fix this to initialize dmactl to NULL. One could argue that modern compilers will set this to zero, but it is useful to keep this initialized as per the same way in functions __lpass_platform_codec_intf_init and lpass_cdc_dma_daiops_hw_params. Cleans up clang scan build warning: sound/soc/qcom/lpass-cdc-dma.c:275:7: warning: Branch condition evaluates to a garbage value [core.uninitialized.Branch] |
| CVE-2024-26798 | In the Linux kernel, the following vulnerability has been resolved: fbcon: always restore the old font data in fbcon_do_set_font() Commit a5a923038d70 (fbdev: fbcon: Properly revert changes when vc_resize() failed) started restoring old font data upon failure (of vc_resize()). But it performs so only for user fonts. It means that the "system"/internal fonts are not restored at all. So in result, the very first call to fbcon_do_set_font() performs no restore at all upon failing vc_resize(). This can be reproduced by Syzkaller to crash the system on the next invocation of font_get(). It's rather hard to hit the allocation failure in vc_resize() on the first font_set(), but not impossible. Esp. if fault injection is used to aid the execution/failure. It was demonstrated by Sirius: BUG: unable to handle page fault for address: fffffffffffffff8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD cb7b067 P4D cb7b067 PUD cb7d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8007 Comm: poc Not tainted 6.7.0-g9d1694dc91ce #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:fbcon_get_font+0x229/0x800 drivers/video/fbdev/core/fbcon.c:2286 Call Trace: <TASK> con_font_get drivers/tty/vt/vt.c:4558 [inline] con_font_op+0x1fc/0xf20 drivers/tty/vt/vt.c:4673 vt_k_ioctl drivers/tty/vt/vt_ioctl.c:474 [inline] vt_ioctl+0x632/0x2ec0 drivers/tty/vt/vt_ioctl.c:752 tty_ioctl+0x6f8/0x1570 drivers/tty/tty_io.c:2803 vfs_ioctl fs/ioctl.c:51 [inline] ... So restore the font data in any case, not only for user fonts. Note the later 'if' is now protected by 'old_userfont' and not 'old_data' as the latter is always set now. (And it is supposed to be non-NULL. Otherwise we would see the bug above again.) |
| CVE-2024-26797 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Prevent potential buffer overflow in map_hw_resources Adds a check in the map_hw_resources function to prevent a potential buffer overflow. The function was accessing arrays using an index that could potentially be greater than the size of the arrays, leading to a buffer overflow. Adds a check to ensure that the index is within the bounds of the arrays. If the index is out of bounds, an error message is printed and break it will continue execution with just ignoring extra data early to prevent the buffer overflow. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7 drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7 |
| CVE-2024-26796 | In the Linux kernel, the following vulnerability has been resolved: drivers: perf: ctr_get_width function for legacy is not defined With parameters CONFIG_RISCV_PMU_LEGACY=y and CONFIG_RISCV_PMU_SBI=n linux kernel crashes when you try perf record: $ perf record ls [ 46.749286] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 46.750199] Oops [#1] [ 46.750342] Modules linked in: [ 46.750608] CPU: 0 PID: 107 Comm: perf-exec Not tainted 6.6.0 #2 [ 46.750906] Hardware name: riscv-virtio,qemu (DT) [ 46.751184] epc : 0x0 [ 46.751430] ra : arch_perf_update_userpage+0x54/0x13e [ 46.751680] epc : 0000000000000000 ra : ffffffff8072ee52 sp : ff2000000022b8f0 [ 46.751958] gp : ffffffff81505988 tp : ff6000000290d400 t0 : ff2000000022b9c0 [ 46.752229] t1 : 0000000000000001 t2 : 0000000000000003 s0 : ff2000000022b930 [ 46.752451] s1 : ff600000028fb000 a0 : 0000000000000000 a1 : ff600000028fb000 [ 46.752673] a2 : 0000000ae2751268 a3 : 00000000004fb708 a4 : 0000000000000004 [ 46.752895] a5 : 0000000000000000 a6 : 000000000017ffe3 a7 : 00000000000000d2 [ 46.753117] s2 : ff600000028fb000 s3 : 0000000ae2751268 s4 : 0000000000000000 [ 46.753338] s5 : ffffffff8153e290 s6 : ff600000863b9000 s7 : ff60000002961078 [ 46.753562] s8 : ff60000002961048 s9 : ff60000002961058 s10: 0000000000000001 [ 46.753783] s11: 0000000000000018 t3 : ffffffffffffffff t4 : ffffffffffffffff [ 46.754005] t5 : ff6000000292270c t6 : ff2000000022bb30 [ 46.754179] status: 0000000200000100 badaddr: 0000000000000000 cause: 000000000000000c [ 46.754653] Code: Unable to access instruction at 0xffffffffffffffec. [ 46.754939] ---[ end trace 0000000000000000 ]--- [ 46.755131] note: perf-exec[107] exited with irqs disabled [ 46.755546] note: perf-exec[107] exited with preempt_count 4 This happens because in the legacy case the ctr_get_width function was not defined, but it is used in arch_perf_update_userpage. Also remove extra check in riscv_pmu_ctr_get_width_mask |
| CVE-2024-26795 | In the Linux kernel, the following vulnerability has been resolved: riscv: Sparse-Memory/vmemmap out-of-bounds fix Offset vmemmap so that the first page of vmemmap will be mapped to the first page of physical memory in order to ensure that vmemmap’s bounds will be respected during pfn_to_page()/page_to_pfn() operations. The conversion macros will produce correct SV39/48/57 addresses for every possible/valid DRAM_BASE inside the physical memory limits. v2:Address Alex's comments |
| CVE-2024-26794 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between ordered extent completion and fiemap For fiemap we recently stopped locking the target extent range for the whole duration of the fiemap call, in order to avoid a deadlock in a scenario where the fiemap buffer happens to be a memory mapped range of the same file. This use case is very unlikely to be useful in practice but it may be triggered by fuzz testing (syzbot, etc). However by not locking the target extent range for the whole duration of the fiemap call we can race with an ordered extent. This happens like this: 1) The fiemap task finishes processing a file extent item that covers the file range [512K, 1M[, and that file extent item is the last item in the leaf currently being processed; 2) And ordered extent for the file range [768K, 2M[, in COW mode, completes (btrfs_finish_one_ordered()) and the file extent item covering the range [512K, 1M[ is trimmed to cover the range [512K, 768K[ and then a new file extent item for the range [768K, 2M[ is inserted in the inode's subvolume tree; 3) The fiemap task calls fiemap_next_leaf_item(), which then calls btrfs_next_leaf() to find the next leaf / item. This finds that the the next key following the one we previously processed (its type is BTRFS_EXTENT_DATA_KEY and its offset is 512K), is the key corresponding to the new file extent item inserted by the ordered extent, which has a type of BTRFS_EXTENT_DATA_KEY and an offset of 768K; 4) Later the fiemap code ends up at emit_fiemap_extent() and triggers the warning: if (cache->offset + cache->len > offset) { WARN_ON(1); return -EINVAL; } Since we get 1M > 768K, because the previously emitted entry for the old extent covering the file range [512K, 1M[ ends at an offset that is greater than the new extent's start offset (768K). This makes fiemap fail with -EINVAL besides triggering the warning that produces a stack trace like the following: [1621.677651] ------------[ cut here ]------------ [1621.677656] WARNING: CPU: 1 PID: 204366 at fs/btrfs/extent_io.c:2492 emit_fiemap_extent+0x84/0x90 [btrfs] [1621.677899] Modules linked in: btrfs blake2b_generic (...) [1621.677951] CPU: 1 PID: 204366 Comm: pool Not tainted 6.8.0-rc5-btrfs-next-151+ #1 [1621.677954] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [1621.677956] RIP: 0010:emit_fiemap_extent+0x84/0x90 [btrfs] [1621.678033] Code: 2b 4c 89 63 (...) [1621.678035] RSP: 0018:ffffab16089ffd20 EFLAGS: 00010206 [1621.678037] RAX: 00000000004fa000 RBX: ffffab16089ffe08 RCX: 0000000000009000 [1621.678039] RDX: 00000000004f9000 RSI: 00000000004f1000 RDI: ffffab16089ffe90 [1621.678040] RBP: 00000000004f9000 R08: 0000000000001000 R09: 0000000000000000 [1621.678041] R10: 0000000000000000 R11: 0000000000001000 R12: 0000000041d78000 [1621.678043] R13: 0000000000001000 R14: 0000000000000000 R15: ffff9434f0b17850 [1621.678044] FS: 00007fa6e20006c0(0000) GS:ffff943bdfa40000(0000) knlGS:0000000000000000 [1621.678046] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1621.678048] CR2: 00007fa6b0801000 CR3: 000000012d404002 CR4: 0000000000370ef0 [1621.678053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1621.678055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1621.678056] Call Trace: [1621.678074] <TASK> [1621.678076] ? __warn+0x80/0x130 [1621.678082] ? emit_fiemap_extent+0x84/0x90 [btrfs] [1621.678159] ? report_bug+0x1f4/0x200 [1621.678164] ? handle_bug+0x42/0x70 [1621.678167] ? exc_invalid_op+0x14/0x70 [1621.678170] ? asm_exc_invalid_op+0x16/0x20 [1621.678178] ? emit_fiemap_extent+0x84/0x90 [btrfs] [1621.678253] extent_fiemap+0x766 ---truncated--- |
| CVE-2024-26793 | In the Linux kernel, the following vulnerability has been resolved: gtp: fix use-after-free and null-ptr-deref in gtp_newlink() The gtp_link_ops operations structure for the subsystem must be registered after registering the gtp_net_ops pernet operations structure. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: [ 1010.702740] gtp: GTP module unloaded [ 1010.715877] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI [ 1010.715888] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 1010.715895] CPU: 1 PID: 128616 Comm: a.out Not tainted 6.8.0-rc6-std-def-alt1 #1 [ 1010.715899] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 [ 1010.715908] RIP: 0010:gtp_newlink+0x4d7/0x9c0 [gtp] [ 1010.715915] Code: 80 3c 02 00 0f 85 41 04 00 00 48 8b bb d8 05 00 00 e8 ed f6 ff ff 48 89 c2 48 89 c5 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4f 04 00 00 4c 89 e2 4c 8b 6d 00 48 b8 00 00 00 [ 1010.715920] RSP: 0018:ffff888020fbf180 EFLAGS: 00010203 [ 1010.715929] RAX: dffffc0000000000 RBX: ffff88800399c000 RCX: 0000000000000000 [ 1010.715933] RDX: 0000000000000001 RSI: ffffffff84805280 RDI: 0000000000000282 [ 1010.715938] RBP: 000000000000000d R08: 0000000000000001 R09: 0000000000000000 [ 1010.715942] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88800399cc80 [ 1010.715947] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000400 [ 1010.715953] FS: 00007fd1509ab5c0(0000) GS:ffff88805b300000(0000) knlGS:0000000000000000 [ 1010.715958] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1010.715962] CR2: 0000000000000000 CR3: 000000001c07a000 CR4: 0000000000750ee0 [ 1010.715968] PKRU: 55555554 [ 1010.715972] Call Trace: [ 1010.715985] ? __die_body.cold+0x1a/0x1f [ 1010.715995] ? die_addr+0x43/0x70 [ 1010.716002] ? exc_general_protection+0x199/0x2f0 [ 1010.716016] ? asm_exc_general_protection+0x1e/0x30 [ 1010.716026] ? gtp_newlink+0x4d7/0x9c0 [gtp] [ 1010.716034] ? gtp_net_exit+0x150/0x150 [gtp] [ 1010.716042] __rtnl_newlink+0x1063/0x1700 [ 1010.716051] ? rtnl_setlink+0x3c0/0x3c0 [ 1010.716063] ? is_bpf_text_address+0xc0/0x1f0 [ 1010.716070] ? kernel_text_address.part.0+0xbb/0xd0 [ 1010.716076] ? __kernel_text_address+0x56/0xa0 [ 1010.716084] ? unwind_get_return_address+0x5a/0xa0 [ 1010.716091] ? create_prof_cpu_mask+0x30/0x30 [ 1010.716098] ? arch_stack_walk+0x9e/0xf0 [ 1010.716106] ? stack_trace_save+0x91/0xd0 [ 1010.716113] ? stack_trace_consume_entry+0x170/0x170 [ 1010.716121] ? __lock_acquire+0x15c5/0x5380 [ 1010.716139] ? mark_held_locks+0x9e/0xe0 [ 1010.716148] ? kmem_cache_alloc_trace+0x35f/0x3c0 [ 1010.716155] ? __rtnl_newlink+0x1700/0x1700 [ 1010.716160] rtnl_newlink+0x69/0xa0 [ 1010.716166] rtnetlink_rcv_msg+0x43b/0xc50 [ 1010.716172] ? rtnl_fdb_dump+0x9f0/0x9f0 [ 1010.716179] ? lock_acquire+0x1fe/0x560 [ 1010.716188] ? netlink_deliver_tap+0x12f/0xd50 [ 1010.716196] netlink_rcv_skb+0x14d/0x440 [ 1010.716202] ? rtnl_fdb_dump+0x9f0/0x9f0 [ 1010.716208] ? netlink_ack+0xab0/0xab0 [ 1010.716213] ? netlink_deliver_tap+0x202/0xd50 [ 1010.716220] ? netlink_deliver_tap+0x218/0xd50 [ 1010.716226] ? __virt_addr_valid+0x30b/0x590 [ 1010.716233] netlink_unicast+0x54b/0x800 [ 1010.716240] ? netlink_attachskb+0x870/0x870 [ 1010.716248] ? __check_object_size+0x2de/0x3b0 [ 1010.716254] netlink_sendmsg+0x938/0xe40 [ 1010.716261] ? netlink_unicast+0x800/0x800 [ 1010.716269] ? __import_iovec+0x292/0x510 [ 1010.716276] ? netlink_unicast+0x800/0x800 [ 1010.716284] __sock_sendmsg+0x159/0x190 [ 1010.716290] ____sys_sendmsg+0x712/0x880 [ 1010.716297] ? sock_write_iter+0x3d0/0x3d0 [ 1010.716304] ? __ia32_sys_recvmmsg+0x270/0x270 [ 1010.716309] ? lock_acquire+0x1fe/0x560 [ 1010.716315] ? drain_array_locked+0x90/0x90 [ 1010.716324] ___sys_sendmsg+0xf8/0x170 [ 1010.716331] ? sendmsg_copy_msghdr+0x170/0x170 [ 1010.716337] ? lockdep_init_map ---truncated--- |
| CVE-2024-26792 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix double free of anonymous device after snapshot creation failure When creating a snapshot we may do a double free of an anonymous device in case there's an error committing the transaction. The second free may result in freeing an anonymous device number that was allocated by some other subsystem in the kernel or another btrfs filesystem. The steps that lead to this: 1) At ioctl.c:create_snapshot() we allocate an anonymous device number and assign it to pending_snapshot->anon_dev; 2) Then we call btrfs_commit_transaction() and end up at transaction.c:create_pending_snapshot(); 3) There we call btrfs_get_new_fs_root() and pass it the anonymous device number stored in pending_snapshot->anon_dev; 4) btrfs_get_new_fs_root() frees that anonymous device number because btrfs_lookup_fs_root() returned a root - someone else did a lookup of the new root already, which could some task doing backref walking; 5) After that some error happens in the transaction commit path, and at ioctl.c:create_snapshot() we jump to the 'fail' label, and after that we free again the same anonymous device number, which in the meanwhile may have been reallocated somewhere else, because pending_snapshot->anon_dev still has the same value as in step 1. Recently syzbot ran into this and reported the following trace: ------------[ cut here ]------------ ida_free called for id=51 which is not allocated. WARNING: CPU: 1 PID: 31038 at lib/idr.c:525 ida_free+0x370/0x420 lib/idr.c:525 Modules linked in: CPU: 1 PID: 31038 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00410-gc02197fc9076 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 RIP: 0010:ida_free+0x370/0x420 lib/idr.c:525 Code: 10 42 80 3c 28 (...) RSP: 0018:ffffc90015a67300 EFLAGS: 00010246 RAX: be5130472f5dd000 RBX: 0000000000000033 RCX: 0000000000040000 RDX: ffffc90009a7a000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: ffffc90015a673f0 R08: ffffffff81577992 R09: 1ffff92002b4cdb4 R10: dffffc0000000000 R11: fffff52002b4cdb5 R12: 0000000000000246 R13: dffffc0000000000 R14: ffffffff8e256b80 R15: 0000000000000246 FS: 00007fca3f4b46c0(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f167a17b978 CR3: 000000001ed26000 CR4: 0000000000350ef0 Call Trace: <TASK> btrfs_get_root_ref+0xa48/0xaf0 fs/btrfs/disk-io.c:1346 create_pending_snapshot+0xff2/0x2bc0 fs/btrfs/transaction.c:1837 create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1931 btrfs_commit_transaction+0xf1c/0x3740 fs/btrfs/transaction.c:2404 create_snapshot+0x507/0x880 fs/btrfs/ioctl.c:848 btrfs_mksubvol+0x5d0/0x750 fs/btrfs/ioctl.c:998 btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1044 __btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1306 btrfs_ioctl_snap_create_v2+0x1ca/0x400 fs/btrfs/ioctl.c:1393 btrfs_ioctl+0xa74/0xd40 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0xfe/0x170 fs/ioctl.c:857 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7fca3e67dda9 Code: 28 00 00 00 (...) RSP: 002b:00007fca3f4b40c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fca3e7abf80 RCX: 00007fca3e67dda9 RDX: 00000000200005c0 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 00007fca3e6ca47a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fca3e7abf80 R15: 00007fff6bf95658 </TASK> Where we get an explicit message where we attempt to free an anonymous device number that is not currently allocated. It happens in a different code path from the example below, at btrfs_get_root_ref(), so this change may not fix the case triggered by sy ---truncated--- |
| CVE-2024-26791 | In the Linux kernel, the following vulnerability has been resolved: btrfs: dev-replace: properly validate device names There's a syzbot report that device name buffers passed to device replace are not properly checked for string termination which could lead to a read out of bounds in getname_kernel(). Add a helper that validates both source and target device name buffers. For devid as the source initialize the buffer to empty string in case something tries to read it later. This was originally analyzed and fixed in a different way by Edward Adam Davis (see links). |
| CVE-2024-26790 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read There is chip (ls1028a) errata: The SoC may hang on 16 byte unaligned read transactions by QDMA. Unaligned read transactions initiated by QDMA may stall in the NOC (Network On-Chip), causing a deadlock condition. Stalled transactions will trigger completion timeouts in PCIe controller. Workaround: Enable prefetch by setting the source descriptor prefetchable bit ( SD[PF] = 1 ). Implement this workaround. |
| CVE-2024-26789 | In the Linux kernel, the following vulnerability has been resolved: crypto: arm64/neonbs - fix out-of-bounds access on short input The bit-sliced implementation of AES-CTR operates on blocks of 128 bytes, and will fall back to the plain NEON version for tail blocks or inputs that are shorter than 128 bytes to begin with. It will call straight into the plain NEON asm helper, which performs all memory accesses in granules of 16 bytes (the size of a NEON register). For this reason, the associated plain NEON glue code will copy inputs shorter than 16 bytes into a temporary buffer, given that this is a rare occurrence and it is not worth the effort to work around this in the asm code. The fallback from the bit-sliced NEON version fails to take this into account, potentially resulting in out-of-bounds accesses. So clone the same workaround, and use a temp buffer for short in/outputs. |
| CVE-2024-26788 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-qdma: init irq after reg initialization Initialize the qDMA irqs after the registers are configured so that interrupts that may have been pending from a primary kernel don't get processed by the irq handler before it is ready to and cause panic with the following trace: Call trace: fsl_qdma_queue_handler+0xf8/0x3e8 __handle_irq_event_percpu+0x78/0x2b0 handle_irq_event_percpu+0x1c/0x68 handle_irq_event+0x44/0x78 handle_fasteoi_irq+0xc8/0x178 generic_handle_irq+0x24/0x38 __handle_domain_irq+0x90/0x100 gic_handle_irq+0x5c/0xb8 el1_irq+0xb8/0x180 _raw_spin_unlock_irqrestore+0x14/0x40 __setup_irq+0x4bc/0x798 request_threaded_irq+0xd8/0x190 devm_request_threaded_irq+0x74/0xe8 fsl_qdma_probe+0x4d4/0xca8 platform_drv_probe+0x50/0xa0 really_probe+0xe0/0x3f8 driver_probe_device+0x64/0x130 device_driver_attach+0x6c/0x78 __driver_attach+0xbc/0x158 bus_for_each_dev+0x5c/0x98 driver_attach+0x20/0x28 bus_add_driver+0x158/0x220 driver_register+0x60/0x110 __platform_driver_register+0x44/0x50 fsl_qdma_driver_init+0x18/0x20 do_one_initcall+0x48/0x258 kernel_init_freeable+0x1a4/0x23c kernel_init+0x10/0xf8 ret_from_fork+0x10/0x18 |
| CVE-2024-26787 | In the Linux kernel, the following vulnerability has been resolved: mmc: mmci: stm32: fix DMA API overlapping mappings warning Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning: DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST, overlapping mappings aren't supported WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568 add_dma_entry+0x234/0x2f4 Modules linked in: CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1 Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT) Workqueue: events_freezable mmc_rescan Call trace: add_dma_entry+0x234/0x2f4 debug_dma_map_sg+0x198/0x350 __dma_map_sg_attrs+0xa0/0x110 dma_map_sg_attrs+0x10/0x2c sdmmc_idma_prep_data+0x80/0xc0 mmci_prep_data+0x38/0x84 mmci_start_data+0x108/0x2dc mmci_request+0xe4/0x190 __mmc_start_request+0x68/0x140 mmc_start_request+0x94/0xc0 mmc_wait_for_req+0x70/0x100 mmc_send_tuning+0x108/0x1ac sdmmc_execute_tuning+0x14c/0x210 mmc_execute_tuning+0x48/0xec mmc_sd_init_uhs_card.part.0+0x208/0x464 mmc_sd_init_card+0x318/0x89c mmc_attach_sd+0xe4/0x180 mmc_rescan+0x244/0x320 DMA API debug brings to light leaking dma-mappings as dma_map_sg and dma_unmap_sg are not correctly balanced. If an error occurs in mmci_cmd_irq function, only mmci_dma_error function is called and as this API is not managed on stm32 variant, dma_unmap_sg is never called in this error path. |
| CVE-2024-26786 | In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix iopt_access_list_id overwrite bug Syzkaller reported the following WARN_ON: WARNING: CPU: 1 PID: 4738 at drivers/iommu/iommufd/io_pagetable.c:1360 Call Trace: iommufd_access_change_ioas+0x2fe/0x4e0 iommufd_access_destroy_object+0x50/0xb0 iommufd_object_remove+0x2a3/0x490 iommufd_object_destroy_user iommufd_access_destroy+0x71/0xb0 iommufd_test_staccess_release+0x89/0xd0 __fput+0x272/0xb50 __fput_sync+0x4b/0x60 __do_sys_close __se_sys_close __x64_sys_close+0x8b/0x110 do_syscall_x64 The mismatch between the access pointer in the list and the passed-in pointer is resulting from an overwrite of access->iopt_access_list_id, in iopt_add_access(). Called from iommufd_access_change_ioas() when xa_alloc() succeeds but iopt_calculate_iova_alignment() fails. Add a new_id in iopt_add_access() and only update iopt_access_list_id when returning successfully. |
| CVE-2024-26785 | In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix protection fault in iommufd_test_syz_conv_iova Syzkaller reported the following bug: general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7] Call Trace: lock_acquire lock_acquire+0x1ce/0x4f0 down_read+0x93/0x4a0 iommufd_test_syz_conv_iova+0x56/0x1f0 iommufd_test_access_rw.isra.0+0x2ec/0x390 iommufd_test+0x1058/0x1e30 iommufd_fops_ioctl+0x381/0x510 vfs_ioctl __do_sys_ioctl __se_sys_ioctl __x64_sys_ioctl+0x170/0x1e0 do_syscall_x64 do_syscall_64+0x71/0x140 This is because the new iommufd_access_change_ioas() sets access->ioas to NULL during its process, so the lock might be gone in a concurrent racing context. Fix this by doing the same access->ioas sanity as iommufd_access_rw() and iommufd_access_pin_pages() functions do. |
| CVE-2024-26784 | In the Linux kernel, the following vulnerability has been resolved: pmdomain: arm: Fix NULL dereference on scmi_perf_domain removal On unloading of the scmi_perf_domain module got the below splat, when in the DT provided to the system under test the '#power-domain-cells' property was missing. Indeed, this particular setup causes the probe to bail out early without giving any error, which leads to the ->remove() callback gets to run too, but without all the expected initialized structures in place. Add a check and bail out early on remove too. Call trace: scmi_perf_domain_remove+0x28/0x70 [scmi_perf_domain] scmi_dev_remove+0x28/0x40 [scmi_core] device_remove+0x54/0x90 device_release_driver_internal+0x1dc/0x240 driver_detach+0x58/0xa8 bus_remove_driver+0x78/0x108 driver_unregister+0x38/0x70 scmi_driver_unregister+0x28/0x180 [scmi_core] scmi_perf_domain_driver_exit+0x18/0xb78 [scmi_perf_domain] __arm64_sys_delete_module+0x1a8/0x2c0 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0xb8 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 Code: a90153f3 f9403c14 f9414800 955f8a05 (b9400a80) ---[ end trace 0000000000000000 ]--- |
| CVE-2024-26783 | In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index With numa balancing on, when a numa system is running where a numa node doesn't have its local memory so it has no managed zones, the following oops has been observed. It's because wakeup_kswapd() is called with a wrong zone index, -1. Fixed it by checking the index before calling wakeup_kswapd(). > BUG: unable to handle page fault for address: 00000000000033f3 > #PF: supervisor read access in kernel mode > #PF: error_code(0x0000) - not-present page > PGD 0 P4D 0 > Oops: 0000 [#1] PREEMPT SMP NOPTI > CPU: 2 PID: 895 Comm: masim Not tainted 6.6.0-dirty #255 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS > rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 > RIP: 0010:wakeup_kswapd (./linux/mm/vmscan.c:7812) > Code: (omitted) > RSP: 0000:ffffc90004257d58 EFLAGS: 00010286 > RAX: ffffffffffffffff RBX: ffff88883fff0480 RCX: 0000000000000003 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88883fff0480 > RBP: ffffffffffffffff R08: ff0003ffffffffff R09: ffffffffffffffff > R10: ffff888106c95540 R11: 0000000055555554 R12: 0000000000000003 > R13: 0000000000000000 R14: 0000000000000000 R15: ffff88883fff0940 > FS: 00007fc4b8124740(0000) GS:ffff888827c00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00000000000033f3 CR3: 000000026cc08004 CR4: 0000000000770ee0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > PKRU: 55555554 > Call Trace: > <TASK> > ? __die > ? page_fault_oops > ? __pte_offset_map_lock > ? exc_page_fault > ? asm_exc_page_fault > ? wakeup_kswapd > migrate_misplaced_page > __handle_mm_fault > handle_mm_fault > do_user_addr_fault > exc_page_fault > asm_exc_page_fault > RIP: 0033:0x55b897ba0808 > Code: (omitted) > RSP: 002b:00007ffeefa821a0 EFLAGS: 00010287 > RAX: 000055b89983acd0 RBX: 00007ffeefa823f8 RCX: 000055b89983acd0 > RDX: 00007fc2f8122010 RSI: 0000000000020000 RDI: 000055b89983acd0 > RBP: 00007ffeefa821a0 R08: 0000000000000037 R09: 0000000000000075 > R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 > R13: 00007ffeefa82410 R14: 000055b897ba5dd8 R15: 00007fc4b8340000 > </TASK> |
| CVE-2024-26782 | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix double-free on socket dismantle when MPTCP server accepts an incoming connection, it clones its listener socket. However, the pointer to 'inet_opt' for the new socket has the same value as the original one: as a consequence, on program exit it's possible to observe the following splat: BUG: KASAN: double-free in inet_sock_destruct+0x54f/0x8b0 Free of addr ffff888485950880 by task swapper/25/0 CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Not tainted 6.8.0-rc1+ #609 Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013 Call Trace: <IRQ> dump_stack_lvl+0x32/0x50 print_report+0xca/0x620 kasan_report_invalid_free+0x64/0x90 __kasan_slab_free+0x1aa/0x1f0 kfree+0xed/0x2e0 inet_sock_destruct+0x54f/0x8b0 __sk_destruct+0x48/0x5b0 rcu_do_batch+0x34e/0xd90 rcu_core+0x559/0xac0 __do_softirq+0x183/0x5a4 irq_exit_rcu+0x12d/0x170 sysvec_apic_timer_interrupt+0x6b/0x80 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x16/0x20 RIP: 0010:cpuidle_enter_state+0x175/0x300 Code: 30 00 0f 84 1f 01 00 00 83 e8 01 83 f8 ff 75 e5 48 83 c4 18 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc fb 45 85 ed <0f> 89 60 ff ff ff 48 c1 e5 06 48 c7 43 18 00 00 00 00 48 83 44 2b RSP: 0018:ffff888481cf7d90 EFLAGS: 00000202 RAX: 0000000000000000 RBX: ffff88887facddc8 RCX: 0000000000000000 RDX: 1ffff1110ff588b1 RSI: 0000000000000019 RDI: ffff88887fac4588 RBP: 0000000000000004 R08: 0000000000000002 R09: 0000000000043080 R10: 0009b02ea273363f R11: ffff88887fabf42b R12: ffffffff932592e0 R13: 0000000000000004 R14: 0000000000000000 R15: 00000022c880ec80 cpuidle_enter+0x4a/0xa0 do_idle+0x310/0x410 cpu_startup_entry+0x51/0x60 start_secondary+0x211/0x270 secondary_startup_64_no_verify+0x184/0x18b </TASK> Allocated by task 6853: kasan_save_stack+0x1c/0x40 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 __kmalloc+0x1eb/0x450 cipso_v4_sock_setattr+0x96/0x360 netlbl_sock_setattr+0x132/0x1f0 selinux_netlbl_socket_post_create+0x6c/0x110 selinux_socket_post_create+0x37b/0x7f0 security_socket_post_create+0x63/0xb0 __sock_create+0x305/0x450 __sys_socket_create.part.23+0xbd/0x130 __sys_socket+0x37/0xb0 __x64_sys_socket+0x6f/0xb0 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Freed by task 6858: kasan_save_stack+0x1c/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x12c/0x1f0 kfree+0xed/0x2e0 inet_sock_destruct+0x54f/0x8b0 __sk_destruct+0x48/0x5b0 subflow_ulp_release+0x1f0/0x250 tcp_cleanup_ulp+0x6e/0x110 tcp_v4_destroy_sock+0x5a/0x3a0 inet_csk_destroy_sock+0x135/0x390 tcp_fin+0x416/0x5c0 tcp_data_queue+0x1bc8/0x4310 tcp_rcv_state_process+0x15a3/0x47b0 tcp_v4_do_rcv+0x2c1/0x990 tcp_v4_rcv+0x41fb/0x5ed0 ip_protocol_deliver_rcu+0x6d/0x9f0 ip_local_deliver_finish+0x278/0x360 ip_local_deliver+0x182/0x2c0 ip_rcv+0xb5/0x1c0 __netif_receive_skb_one_core+0x16e/0x1b0 process_backlog+0x1e3/0x650 __napi_poll+0xa6/0x500 net_rx_action+0x740/0xbb0 __do_softirq+0x183/0x5a4 The buggy address belongs to the object at ffff888485950880 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes inside of 64-byte region [ffff888485950880, ffff8884859508c0) The buggy address belongs to the physical page: page:0000000056d1e95e refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888485950700 pfn:0x485950 flags: 0x57ffffc0000800(slab|node=1|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0057ffffc0000800 ffff88810004c640 ffffea00121b8ac0 dead000000000006 raw: ffff888485950700 0000000000200019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888485950780: fa fb fb ---truncated--- |
| CVE-2024-26781 | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix possible deadlock in subflow diag Syzbot and Eric reported a lockdep splat in the subflow diag: WARNING: possible circular locking dependency detected 6.8.0-rc4-syzkaller-00212-g40b9385dd8e6 #0 Not tainted syz-executor.2/24141 is trying to acquire lock: ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 but task is already holding lock: ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: inet_diag_dump_icsk+0x39f/0x1f80 net/ipv4/inet_diag.c:1038 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&h->lhash2[i].lock){+.+.}-{2:2}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __inet_hash+0x335/0xbe0 net/ipv4/inet_hashtables.c:743 inet_csk_listen_start+0x23a/0x320 net/ipv4/inet_connection_sock.c:1261 __inet_listen_sk+0x2a2/0x770 net/ipv4/af_inet.c:217 inet_listen+0xa3/0x110 net/ipv4/af_inet.c:239 rds_tcp_listen_init+0x3fd/0x5a0 net/rds/tcp_listen.c:316 rds_tcp_init_net+0x141/0x320 net/rds/tcp.c:577 ops_init+0x352/0x610 net/core/net_namespace.c:136 __register_pernet_operations net/core/net_namespace.c:1214 [inline] register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1283 register_pernet_device+0x33/0x80 net/core/net_namespace.c:1370 rds_tcp_init+0x62/0xd0 net/rds/tcp.c:735 do_one_initcall+0x238/0x830 init/main.c:1236 do_initcall_level+0x157/0x210 init/main.c:1298 do_initcalls+0x3f/0x80 init/main.c:1314 kernel_init_freeable+0x42f/0x5d0 init/main.c:1551 kernel_init+0x1d/0x2a0 init/main.c:1441 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242 -> #0 (k-sk_lock-AF_INET6){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 lock_sock_fast include/net/sock.h:1723 [inline] subflow_get_info+0x166/0xd20 net/mptcp/diag.c:28 tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 inet_sk_diag_fill+0x10ed/0x1e00 net/ipv4/inet_diag.c:345 inet_diag_dump_icsk+0x55b/0x1f80 net/ipv4/inet_diag.c:1061 __inet_diag_dump+0x211/0x3a0 net/ipv4/inet_diag.c:1263 inet_diag_dump_compat+0x1c1/0x2d0 net/ipv4/inet_diag.c:1371 netlink_dump+0x59b/0xc80 net/netlink/af_netlink.c:2264 __netlink_dump_start+0x5df/0x790 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:338 [inline] inet_diag_rcv_msg_compat+0x209/0x4c0 net/ipv4/inet_diag.c:1405 sock_diag_rcv_msg+0xe7/0x410 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 As noted by Eric we can break the lock dependency chain avoid dumping ---truncated--- |
| CVE-2024-26780 | In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix task hung while purging oob_skb in GC. syzbot reported a task hung; at the same time, GC was looping infinitely in list_for_each_entry_safe() for OOB skb. [0] syzbot demonstrated that the list_for_each_entry_safe() was not actually safe in this case. A single skb could have references for multiple sockets. If we free such a skb in the list_for_each_entry_safe(), the current and next sockets could be unlinked in a single iteration. unix_notinflight() uses list_del_init() to unlink the socket, so the prefetched next socket forms a loop itself and list_for_each_entry_safe() never stops. Here, we must use while() and make sure we always fetch the first socket. [0]: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 5065 Comm: syz-executor236 Not tainted 6.8.0-rc3-syzkaller-00136-g1f719a2f3fa6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 RIP: 0010:preempt_count arch/x86/include/asm/preempt.h:26 [inline] RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline] RIP: 0010:__sanitizer_cov_trace_pc+0xd/0x60 kernel/kcov.c:207 Code: cc cc cc cc 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 65 48 8b 14 25 40 c2 03 00 <65> 8b 05 b4 7c 78 7e a9 00 01 ff 00 48 8b 34 24 74 0f f6 c4 01 74 RSP: 0018:ffffc900033efa58 EFLAGS: 00000283 RAX: ffff88807b077800 RBX: ffff88807b077800 RCX: 1ffffffff27b1189 RDX: ffff88802a5a3b80 RSI: ffffffff8968488d RDI: ffff88807b077f70 RBP: ffffc900033efbb0 R08: 0000000000000001 R09: fffffbfff27a900c R10: ffffffff93d48067 R11: ffffffff8ae000eb R12: ffff88807b077800 R13: dffffc0000000000 R14: ffff88807b077e40 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564f4fc1e3a8 CR3: 000000000d57a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> unix_gc+0x563/0x13b0 net/unix/garbage.c:319 unix_release_sock+0xa93/0xf80 net/unix/af_unix.c:683 unix_release+0x91/0xf0 net/unix/af_unix.c:1064 __sock_release+0xb0/0x270 net/socket.c:659 sock_close+0x1c/0x30 net/socket.c:1421 __fput+0x270/0xb80 fs/file_table.c:376 task_work_run+0x14f/0x250 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xa8a/0x2ad0 kernel/exit.c:871 do_group_exit+0xd4/0x2a0 kernel/exit.c:1020 __do_sys_exit_group kernel/exit.c:1031 [inline] __se_sys_exit_group kernel/exit.c:1029 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1029 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd5/0x270 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f9d6cbdac09 Code: Unable to access opcode bytes at 0x7f9d6cbdabdf. RSP: 002b:00007fff5952feb8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9d6cbdac09 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 00007f9d6cc552b0 R08: ffffffffffffffb8 R09: 0000000000000006 R10: 0000000000000006 R11: 0000000000000246 R12: 00007f9d6cc552b0 R13: 0000000000000000 R14: 00007f9d6cc55d00 R15: 00007f9d6cbabe70 </TASK> |
| CVE-2024-26779 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix race condition on enabling fast-xmit fast-xmit must only be enabled after the sta has been uploaded to the driver, otherwise it could end up passing the not-yet-uploaded sta via drv_tx calls to the driver, leading to potential crashes because of uninitialized drv_priv data. Add a missing sta->uploaded check and re-check fast xmit after inserting a sta. |
| CVE-2024-26778 | In the Linux kernel, the following vulnerability has been resolved: fbdev: savage: Error out if pixclock equals zero The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. Although pixclock is checked in savagefb_decode_var(), but it is not checked properly in savagefb_probe(). Fix this by checking whether pixclock is zero in the function savagefb_check_var() before info->var.pixclock is used as the divisor. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8. |
| CVE-2024-26777 | In the Linux kernel, the following vulnerability has been resolved: fbdev: sis: Error out if pixclock equals zero The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. In sisfb_check_var(), var->pixclock is used as a divisor to caculate drate before it is checked against zero. Fix this by checking it at the beginning. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8. |
| CVE-2024-26776 | In the Linux kernel, the following vulnerability has been resolved: spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected Return IRQ_NONE from the interrupt handler when no interrupt was detected. Because an empty interrupt will cause a null pointer error: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: complete+0x54/0x100 hisi_sfc_v3xx_isr+0x2c/0x40 [spi_hisi_sfc_v3xx] __handle_irq_event_percpu+0x64/0x1e0 handle_irq_event+0x7c/0x1cc |
| CVE-2024-26775 | In the Linux kernel, the following vulnerability has been resolved: aoe: avoid potential deadlock at set_capacity Move set_capacity() outside of the section procected by (&d->lock). To avoid possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- [1] lock(&bdev->bd_size_lock); local_irq_disable(); [2] lock(&d->lock); [3] lock(&bdev->bd_size_lock); <Interrupt> [4] lock(&d->lock); *** DEADLOCK *** Where [1](&bdev->bd_size_lock) hold by zram_add()->set_capacity(). [2]lock(&d->lock) hold by aoeblk_gdalloc(). And aoeblk_gdalloc() is trying to acquire [3](&bdev->bd_size_lock) at set_capacity() call. In this situation an attempt to acquire [4]lock(&d->lock) from aoecmd_cfg_rsp() will lead to deadlock. So the simplest solution is breaking lock dependency [2](&d->lock) -> [3](&bdev->bd_size_lock) by moving set_capacity() outside. |
| CVE-2024-26774 | In the Linux kernel, the following vulnerability has been resolved: ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt Determine if bb_fragments is 0 instead of determining bb_free to eliminate the risk of dividing by zero when the block bitmap is corrupted. |
| CVE-2024-26773 | In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found() Determine if the group block bitmap is corrupted before using ac_b_ex in ext4_mb_try_best_found() to avoid allocating blocks from a group with a corrupted block bitmap in the following concurrency and making the situation worse. ext4_mb_regular_allocator ext4_lock_group(sb, group) ext4_mb_good_group // check if the group bbitmap is corrupted ext4_mb_complex_scan_group // Scan group gets ac_b_ex but doesn't use it ext4_unlock_group(sb, group) ext4_mark_group_bitmap_corrupted(group) // The block bitmap was corrupted during // the group unlock gap. ext4_mb_try_best_found ext4_lock_group(ac->ac_sb, group) ext4_mb_use_best_found mb_mark_used // Allocating blocks in block bitmap corrupted group |
| CVE-2024-26772 | In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal() Places the logic for checking if the group's block bitmap is corrupt under the protection of the group lock to avoid allocating blocks from the group with a corrupted block bitmap. |
| CVE-2024-26771 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: edma: Add some null pointer checks to the edma_probe devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. |
| CVE-2024-26770 | In the Linux kernel, the following vulnerability has been resolved: HID: nvidia-shield: Add missing null pointer checks to LED initialization devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. [[email protected]: tweak changelog a bit] |
| CVE-2024-26769 | In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: avoid deadlock on delete association path When deleting an association the shutdown path is deadlocking because we try to flush the nvmet_wq nested. Avoid this by deadlock by deferring the put work into its own work item. |
| CVE-2024-26768 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC] With default config, the value of NR_CPUS is 64. When HW platform has more then 64 cpus, system will crash on these platforms. MAX_CORE_PIC is the maximum cpu number in MADT table (max physical number) which can exceed the supported maximum cpu number (NR_CPUS, max logical number), but kernel should not crash. Kernel should boot cpus with NR_CPUS, let the remainder cpus stay in BIOS. The potential crash reason is that the array acpi_core_pic[NR_CPUS] can be overflowed when parsing MADT table, and it is obvious that CORE_PIC should be corresponding to physical core rather than logical core, so it is better to define the array as acpi_core_pic[MAX_CORE_PIC]. With the patch, system can boot up 64 vcpus with qemu parameter -smp 128, otherwise system will crash with the following message. [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000420000004259, era == 90000000037a5f0c, ra == 90000000037a46ec [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.8.0-rc2+ #192 [ 0.000000] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 0.000000] pc 90000000037a5f0c ra 90000000037a46ec tp 9000000003c90000 sp 9000000003c93d60 [ 0.000000] a0 0000000000000019 a1 9000000003d93bc0 a2 0000000000000000 a3 9000000003c93bd8 [ 0.000000] a4 9000000003c93a74 a5 9000000083c93a67 a6 9000000003c938f0 a7 0000000000000005 [ 0.000000] t0 0000420000004201 t1 0000000000000000 t2 0000000000000001 t3 0000000000000001 [ 0.000000] t4 0000000000000003 t5 0000000000000000 t6 0000000000000030 t7 0000000000000063 [ 0.000000] t8 0000000000000014 u0 ffffffffffffffff s9 0000000000000000 s0 9000000003caee98 [ 0.000000] s1 90000000041b0480 s2 9000000003c93da0 s3 9000000003c93d98 s4 9000000003c93d90 [ 0.000000] s5 9000000003caa000 s6 000000000a7fd000 s7 000000000f556b60 s8 000000000e0a4330 [ 0.000000] ra: 90000000037a46ec platform_init+0x214/0x250 [ 0.000000] ERA: 90000000037a5f0c efi_runtime_init+0x30/0x94 [ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE) [ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 0.000000] ECFG: 00070800 (LIE=11 VS=7) [ 0.000000] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 0.000000] BADV: 0000420000004259 [ 0.000000] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 9000000003c93a14 9000000003800898 90000000041844f8 90000000037a46ec [ 0.000000] 000000000a7fd000 0000000008290000 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 00000000019d8000 000000000f556b60 [ 0.000000] 000000000a7fd000 000000000f556b08 9000000003ca7700 9000000003800000 [ 0.000000] 9000000003c93e50 9000000003800898 9000000003800108 90000000037a484c [ 0.000000] 000000000e0a4330 000000000f556b60 000000000a7fd000 000000000f556b08 [ 0.000000] 9000000003ca7700 9000000004184000 0000000000200000 000000000e02b018 [ 0.000000] 000000000a7fd000 90000000037a0790 9000000003800108 0000000000000000 [ 0.000000] 0000000000000000 000000000e0a4330 000000000f556b60 000000000a7fd000 [ 0.000000] 000000000f556b08 000000000eaae298 000000000eaa5040 0000000000200000 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<90000000037a5f0c>] efi_runtime_init+0x30/0x94 [ 0.000000] [<90000000037a46ec>] platform_init+0x214/0x250 [ 0.000000] [<90000000037a484c>] setup_arch+0x124/0x45c [ 0.000000] [<90000000037a0790>] start_kernel+0x90/0x670 [ 0.000000] [<900000000378b0d8>] kernel_entry+0xd8/0xdc |
| CVE-2024-26767 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fixed integer types and null check locations [why]: issues fixed: - comparison with wider integer type in loop condition which can cause infinite loops - pointer dereference before null check |
| CVE-2024-26766 | In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix sdma.h tx->num_descs off-by-one error Unfortunately the commit `fd8958efe877` introduced another error causing the `descs` array to overflow. This reults in further crashes easily reproducible by `sendmsg` system call. [ 1080.836473] general protection fault, probably for non-canonical address 0x400300015528b00a: 0000 [#1] PREEMPT SMP PTI [ 1080.869326] RIP: 0010:hfi1_ipoib_build_ib_tx_headers.constprop.0+0xe1/0x2b0 [hfi1] -- [ 1080.974535] Call Trace: [ 1080.976990] <TASK> [ 1081.021929] hfi1_ipoib_send_dma_common+0x7a/0x2e0 [hfi1] [ 1081.027364] hfi1_ipoib_send_dma_list+0x62/0x270 [hfi1] [ 1081.032633] hfi1_ipoib_send+0x112/0x300 [hfi1] [ 1081.042001] ipoib_start_xmit+0x2a9/0x2d0 [ib_ipoib] [ 1081.046978] dev_hard_start_xmit+0xc4/0x210 -- [ 1081.148347] __sys_sendmsg+0x59/0xa0 crash> ipoib_txreq 0xffff9cfeba229f00 struct ipoib_txreq { txreq = { list = { next = 0xffff9cfeba229f00, prev = 0xffff9cfeba229f00 }, descp = 0xffff9cfeba229f40, coalesce_buf = 0x0, wait = 0xffff9cfea4e69a48, complete = 0xffffffffc0fe0760 <hfi1_ipoib_sdma_complete>, packet_len = 0x46d, tlen = 0x0, num_desc = 0x0, desc_limit = 0x6, next_descq_idx = 0x45c, coalesce_idx = 0x0, flags = 0x0, descs = {{ qw = {0x8024000120dffb00, 0x4} # SDMA_DESC0_FIRST_DESC_FLAG (bit 63) }, { qw = { 0x3800014231b108, 0x4} }, { qw = { 0x310000e4ee0fcf0, 0x8} }, { qw = { 0x3000012e9f8000, 0x8} }, { qw = { 0x59000dfb9d0000, 0x8} }, { qw = { 0x78000e02e40000, 0x8} }} }, sdma_hdr = 0x400300015528b000, <<< invalid pointer in the tx request structure sdma_status = 0x0, SDMA_DESC0_LAST_DESC_FLAG (bit 62) complete = 0x0, priv = 0x0, txq = 0xffff9cfea4e69880, skb = 0xffff9d099809f400 } If an SDMA send consists of exactly 6 descriptors and requires dword padding (in the 7th descriptor), the sdma_txreq descriptor array is not properly expanded and the packet will overflow into the container structure. This results in a panic when the send completion runs. The exact panic varies depending on what elements of the container structure get corrupted. The fix is to use the correct expression in _pad_sdma_tx_descs() to test the need to expand the descriptor array. With this patch the crashes are no longer reproducible and the machine is stable. |
| CVE-2024-26765 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: Disable IRQ before init_fn() for nonboot CPUs Disable IRQ before init_fn() for nonboot CPUs when hotplug, in order to silence such warnings (and also avoid potential errors due to unexpected interrupts): WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:4503 rcu_cpu_starting+0x214/0x280 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 pc 90000000048e3334 ra 90000000047bd56c tp 900000010039c000 sp 900000010039fdd0 a0 0000000000000001 a1 0000000000000006 a2 900000000802c040 a3 0000000000000000 a4 0000000000000001 a5 0000000000000004 a6 0000000000000000 a7 90000000048e3f4c t0 0000000000000001 t1 9000000005c70968 t2 0000000004000000 t3 000000000005e56e t4 00000000000002e4 t5 0000000000001000 t6 ffffffff80000000 t7 0000000000040000 t8 9000000007931638 u0 0000000000000006 s9 0000000000000004 s0 0000000000000001 s1 9000000006356ac0 s2 9000000007244000 s3 0000000000000001 s4 0000000000000001 s5 900000000636f000 s6 7fffffffffffffff s7 9000000002123940 s8 9000000001ca55f8 ra: 90000000047bd56c tlb_init+0x24c/0x528 ERA: 90000000048e3334 rcu_cpu_starting+0x214/0x280 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000000 (PPLV0 -PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071000 (LIE=12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 Stack : 0000000000000000 9000000006375000 9000000005b61878 900000010039c000 900000010039fa30 0000000000000000 900000010039fa38 900000000619a140 9000000006456888 9000000006456880 900000010039f950 0000000000000001 0000000000000001 cb0cb028ec7e52e1 0000000002b90000 9000000100348700 0000000000000000 0000000000000001 ffffffff916d12f1 0000000000000003 0000000000040000 9000000007930370 0000000002b90000 0000000000000004 9000000006366000 900000000619a140 0000000000000000 0000000000000004 0000000000000000 0000000000000009 ffffffffffc681f2 9000000002123940 9000000001ca55f8 9000000006366000 90000000047a4828 00007ffff057ded8 00000000000000b0 0000000000000000 0000000000000000 0000000000071000 ... Call Trace: [<90000000047a4828>] show_stack+0x48/0x1a0 [<9000000005b61874>] dump_stack_lvl+0x84/0xcc [<90000000047f60ac>] __warn+0x8c/0x1e0 [<9000000005b0ab34>] report_bug+0x1b4/0x280 [<9000000005b63110>] do_bp+0x2d0/0x480 [<90000000047a2e20>] handle_bp+0x120/0x1c0 [<90000000048e3334>] rcu_cpu_starting+0x214/0x280 [<90000000047bd568>] tlb_init+0x248/0x528 [<90000000047a4c44>] per_cpu_trap_init+0x124/0x160 [<90000000047a19f4>] cpu_probe+0x494/0xa00 [<90000000047b551c>] start_secondary+0x3c/0xc0 [<9000000005b66134>] smpboot_entry+0x50/0x58 |
| CVE-2024-26764 | In the Linux kernel, the following vulnerability has been resolved: fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio. |
| CVE-2024-26763 | In the Linux kernel, the following vulnerability has been resolved: dm-crypt: don't modify the data when using authenticated encryption It was said that authenticated encryption could produce invalid tag when the data that is being encrypted is modified [1]. So, fix this problem by copying the data into the clone bio first and then encrypt them inside the clone bio. This may reduce performance, but it is needed to prevent the user from corrupting the device by writing data with O_DIRECT and modifying them at the same time. [1] https://lore.kernel.org/all/[email protected]/T/ |
| CVE-2024-26762 | In the Linux kernel, the following vulnerability has been resolved: cxl/pci: Skip to handle RAS errors if CXL.mem device is detached The PCI AER model is an awkward fit for CXL error handling. While the expectation is that a PCI device can escalate to link reset to recover from an AER event, the same reset on CXL amounts to a surprise memory hotplug of massive amounts of memory. At present, the CXL error handler attempts some optimistic error handling to unbind the device from the cxl_mem driver after reaping some RAS register values. This results in a "hopeful" attempt to unplug the memory, but there is no guarantee that will succeed. A subsequent AER notification after the memdev unbind event can no longer assume the registers are mapped. Check for memdev bind before reaping status register values to avoid crashes of the form: BUG: unable to handle page fault for address: ffa00000195e9100 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page [...] RIP: 0010:__cxl_handle_ras+0x30/0x110 [cxl_core] [...] Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x160 ? kernelmode_fixup_or_oops+0x84/0x110 ? exc_page_fault+0x113/0x170 ? asm_exc_page_fault+0x26/0x30 ? __pfx_dpc_reset_link+0x10/0x10 ? __cxl_handle_ras+0x30/0x110 [cxl_core] ? find_cxl_port+0x59/0x80 [cxl_core] cxl_handle_rp_ras+0xbc/0xd0 [cxl_core] cxl_error_detected+0x6c/0xf0 [cxl_core] report_error_detected+0xc7/0x1c0 pci_walk_bus+0x73/0x90 pcie_do_recovery+0x23f/0x330 Longer term, the unbind and PCI_ERS_RESULT_DISCONNECT behavior might need to be replaced with a new PCI_ERS_RESULT_PANIC. |
| CVE-2024-26761 | In the Linux kernel, the following vulnerability has been resolved: cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window The Linux CXL subsystem is built on the assumption that HPA == SPA. That is, the host physical address (HPA) the HDM decoder registers are programmed with are system physical addresses (SPA). During HDM decoder setup, the DVSEC CXL range registers (cxl-3.1, 8.1.3.8) are checked if the memory is enabled and the CXL range is in a HPA window that is described in a CFMWS structure of the CXL host bridge (cxl-3.1, 9.18.1.3). Now, if the HPA is not an SPA, the CXL range does not match a CFMWS window and the CXL memory range will be disabled then. The HDM decoder stops working which causes system memory being disabled and further a system hang during HDM decoder initialization, typically when a CXL enabled kernel boots. Prevent a system hang and do not disable the HDM decoder if the decoder's CXL range is not found in a CFMWS window. Note the change only fixes a hardware hang, but does not implement HPA/SPA translation. Support for this can be added in a follow on patch series. |
| CVE-2024-26760 | In the Linux kernel, the following vulnerability has been resolved: scsi: target: pscsi: Fix bio_put() for error case As of commit 066ff571011d ("block: turn bio_kmalloc into a simple kmalloc wrapper"), a bio allocated by bio_kmalloc() must be freed by bio_uninit() and kfree(). That is not done properly for the error case, hitting WARN and NULL pointer dereference in bio_free(). |
| CVE-2024-26759 | In the Linux kernel, the following vulnerability has been resolved: mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [[email protected]: v4] Link: https://lkml.kernel.org/r/[email protected] |
| CVE-2024-26758 | In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore suspended array in md_check_recovery() mddev_suspend() never stop sync_thread, hence it doesn't make sense to ignore suspended array in md_check_recovery(), which might cause sync_thread can't be unregistered. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) suspend the array: raid_postsuspend mddev_suspend 2) stop the array: raid_dtr md_stop __md_stop_writes stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 3) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 4) daemon thread can't unregister sync thread: md_check_recovery if (mddev->suspended) return; -> return directly md_read_sync_thread clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery); -> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang; This problem is not just related to dm-raid, fix it by ignoring suspended array in md_check_recovery(). And follow up patches will improve dm-raid better to frozen sync thread during suspend. |
| CVE-2024-26757 | In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore read-only array in md_check_recovery() Usually if the array is not read-write, md_check_recovery() won't register new sync_thread in the first place. And if the array is read-write and sync_thread is registered, md_set_readonly() will unregister sync_thread before setting the array read-only. md/raid follow this behavior hence there is no problem. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) array is read-only. dm-raid update super block: rs_update_sbs ro = mddev->ro mddev->ro = 0 -> set array read-write md_update_sb 2) register new sync thread concurrently. 3) dm-raid set array back to read-only: rs_update_sbs mddev->ro = ro 4) stop the array: raid_dtr md_stop stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 5) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 6) daemon thread can't unregister sync thread: md_check_recovery if (!md_is_rdwr(mddev) && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) return; -> -> MD_RECOVERY_RUNNING can't be cleared, hence step 4 hang; The root cause is that dm-raid manipulate 'mddev->ro' by itself, however, dm-raid really should stop sync thread before setting the array read-only. Unfortunately, I need to read more code before I can refacter the handler of 'mddev->ro' in dm-raid, hence let's fix the problem the easy way for now to prevent dm-raid regression. |
| CVE-2024-26756 | In the Linux kernel, the following vulnerability has been resolved: md: Don't register sync_thread for reshape directly Currently, if reshape is interrupted, then reassemble the array will register sync_thread directly from pers->run(), in this case 'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee that md_do_sync() will be executed, hence stop_sync_thread() will hang because 'MD_RECOVERY_RUNNING' can't be cleared. Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE, however, following hang can still be triggered by dm-raid test shell/lvconvert-raid-reshape.sh occasionally: [root@fedora ~]# cat /proc/1982/stack [<0>] stop_sync_thread+0x1ab/0x270 [md_mod] [<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod] [<0>] raid_presuspend+0x1e/0x70 [dm_raid] [<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod] [<0>] __dm_destroy+0x2a5/0x310 [dm_mod] [<0>] dm_destroy+0x16/0x30 [dm_mod] [<0>] dev_remove+0x165/0x290 [dm_mod] [<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod] [<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod] [<0>] vfs_ioctl+0x21/0x60 [<0>] __x64_sys_ioctl+0xb9/0xe0 [<0>] do_syscall_64+0xc6/0x230 [<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 Meanwhile mddev->recovery is: MD_RECOVERY_RUNNING | MD_RECOVERY_INTR | MD_RECOVERY_RESHAPE | MD_RECOVERY_FROZEN Fix this problem by remove the code to register sync_thread directly from raid10 and raid5. And let md_check_recovery() to register sync_thread. |
| CVE-2024-26755 | In the Linux kernel, the following vulnerability has been resolved: md: Don't suspend the array for interrupted reshape md_start_sync() will suspend the array if there are spares that can be added or removed from conf, however, if reshape is still in progress, this won't happen at all or data will be corrupted(remove_and_add_spares won't be called from md_choose_sync_action for reshape), hence there is no need to suspend the array if reshape is not done yet. Meanwhile, there is a potential deadlock for raid456: 1) reshape is interrupted; 2) set one of the disk WantReplacement, and add a new disk to the array, however, recovery won't start until the reshape is finished; 3) then issue an IO across reshpae position, this IO will wait for reshape to make progress; 4) continue to reshape, then md_start_sync() found there is a spare disk that can be added to conf, mddev_suspend() is called; Step 4 and step 3 is waiting for each other, deadlock triggered. Noted this problem is found by code review, and it's not reporduced yet. Fix this porblem by don't suspend the array for interrupted reshape, this is safe because conf won't be changed until reshape is done. |
| CVE-2024-26754 | In the Linux kernel, the following vulnerability has been resolved: gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp() The gtp_net_ops pernet operations structure for the subsystem must be registered before registering the generic netlink family. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 RIP: 0010:gtp_genl_dump_pdp+0x1be/0x800 [gtp] Code: c6 89 c6 e8 64 e9 86 df 58 45 85 f6 0f 85 4e 04 00 00 e8 c5 ee 86 df 48 8b 54 24 18 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 de 05 00 00 48 8b 44 24 18 4c 8b 30 4c 39 f0 74 RSP: 0018:ffff888014107220 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88800fcda588 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f1be4eb05c0(0000) GS:ffff88806ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1be4e766cf CR3: 000000000c33e000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? show_regs+0x90/0xa0 ? die_addr+0x50/0xd0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? gtp_genl_dump_pdp+0x1be/0x800 [gtp] ? __alloc_skb+0x1dd/0x350 ? __pfx___alloc_skb+0x10/0x10 genl_dumpit+0x11d/0x230 netlink_dump+0x5b9/0xce0 ? lockdep_hardirqs_on_prepare+0x253/0x430 ? __pfx_netlink_dump+0x10/0x10 ? kasan_save_track+0x10/0x40 ? __kasan_kmalloc+0x9b/0xa0 ? genl_start+0x675/0x970 __netlink_dump_start+0x6fc/0x9f0 genl_family_rcv_msg_dumpit+0x1bb/0x2d0 ? __pfx_genl_family_rcv_msg_dumpit+0x10/0x10 ? genl_op_from_small+0x2a/0x440 ? cap_capable+0x1d0/0x240 ? __pfx_genl_start+0x10/0x10 ? __pfx_genl_dumpit+0x10/0x10 ? __pfx_genl_done+0x10/0x10 ? security_capable+0x9d/0xe0 |
| CVE-2024-26753 | In the Linux kernel, the following vulnerability has been resolved: crypto: virtio/akcipher - Fix stack overflow on memcpy sizeof(struct virtio_crypto_akcipher_session_para) is less than sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from stack variable leads stack overflow. Clang reports this issue by commands: make -j CC=clang-14 mrproper >/dev/null 2>&1 make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1 make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/ virtio_crypto_akcipher_algs.o |
| CVE-2024-26752 | In the Linux kernel, the following vulnerability has been resolved: l2tp: pass correct message length to ip6_append_data l2tp_ip6_sendmsg needs to avoid accounting for the transport header twice when splicing more data into an already partially-occupied skbuff. To manage this, we check whether the skbuff contains data using skb_queue_empty when deciding how much data to append using ip6_append_data. However, the code which performed the calculation was incorrect: ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0; ...due to C operator precedence, this ends up setting ulen to transhdrlen for messages with a non-zero length, which results in corrupted packets on the wire. Add parentheses to correct the calculation in line with the original intent. |
| CVE-2024-26751 | In the Linux kernel, the following vulnerability has been resolved: ARM: ep93xx: Add terminator to gpiod_lookup_table Without the terminator, if a con_id is passed to gpio_find() that does not exist in the lookup table the function will not stop looping correctly, and eventually cause an oops. |
| CVE-2024-26750 | In the Linux kernel, the following vulnerability has been resolved: af_unix: Drop oob_skb ref before purging queue in GC. syzbot reported another task hung in __unix_gc(). [0] The current while loop assumes that all of the left candidates have oob_skb and calling kfree_skb(oob_skb) releases the remaining candidates. However, I missed a case that oob_skb has self-referencing fd and another fd and the latter sk is placed before the former in the candidate list. Then, the while loop never proceeds, resulting the task hung. __unix_gc() has the same loop just before purging the collected skb, so we can call kfree_skb(oob_skb) there and let __skb_queue_purge() release all inflight sockets. [0]: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 2784 Comm: kworker/u4:8 Not tainted 6.8.0-rc4-syzkaller-01028-g71b605d32017 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Workqueue: events_unbound __unix_gc RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:200 Code: 89 fb e8 23 00 00 00 48 8b 3d 84 f5 1a 0c 48 89 de 5b e9 43 26 57 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <f3> 0f 1e fa 48 8b 04 24 65 48 8b 0d 90 52 70 7e 65 8b 15 91 52 70 RSP: 0018:ffffc9000a17fa78 EFLAGS: 00000287 RAX: ffffffff8a0a6108 RBX: ffff88802b6c2640 RCX: ffff88802c0b3b80 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffffc9000a17fbf0 R08: ffffffff89383f1d R09: 1ffff1100ee5ff84 R10: dffffc0000000000 R11: ffffed100ee5ff85 R12: 1ffff110056d84ee R13: ffffc9000a17fae0 R14: 0000000000000000 R15: ffffffff8f47b840 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffef5687ff8 CR3: 0000000029b34000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> __unix_gc+0xe69/0xf40 net/unix/garbage.c:343 process_one_work kernel/workqueue.c:2633 [inline] process_scheduled_works+0x913/0x1420 kernel/workqueue.c:2706 worker_thread+0xa5f/0x1000 kernel/workqueue.c:2787 kthread+0x2ef/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242 </TASK> |
| CVE-2024-26749 | In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable() ... cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ... 'priv_req' actually free at cdns3_gadget_ep_free_request(). But list_del_init() use priv_req->list after it. [ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4 [ 1542.642868][ T534] [ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-#3): [ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4 [ 1542.665375][ T534] cdns3_gadget_ep_disable+0x1f8/0x388 [cdns3] [ 1542.671571][ T534] usb_ep_disable+0x44/0xe4 [ 1542.675948][ T534] ffs_func_eps_disable+0x64/0xc8 [ 1542.680839][ T534] ffs_func_set_alt+0x74/0x368 [ 1542.685478][ T534] ffs_func_disable+0x18/0x28 Move list_del_init() before cdns3_gadget_ep_free_request() to resolve this problem. |
| CVE-2024-26748 | In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix memory double free when handle zero packet 829 if (request->complete) { 830 spin_unlock(&priv_dev->lock); 831 usb_gadget_giveback_request(&priv_ep->endpoint, 832 request); 833 spin_lock(&priv_dev->lock); 834 } 835 836 if (request->buf == priv_dev->zlp_buf) 837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); Driver append an additional zero packet request when queue a packet, which length mod max packet size is 0. When transfer complete, run to line 831, usb_gadget_giveback_request() will free this requestion. 836 condition is true, so cdns3_gadget_ep_free_request() free this request again. Log: [ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.140696][ T150] [ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-#36): [ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3] Add check at line 829, skip call usb_gadget_giveback_request() if it is additional zero length packet request. Needn't call usb_gadget_giveback_request() because it is allocated in this driver. |
| CVE-2024-26747 | In the Linux kernel, the following vulnerability has been resolved: usb: roles: fix NULL pointer issue when put module's reference In current design, usb role class driver will get usb_role_switch parent's module reference after the user get usb_role_switch device and put the reference after the user put the usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put the usb_role_switch. If so, then, NULL pointer issue will be met when the user put the parent module's reference. This will save the module pointer in structure of usb_role_switch. Then, we don't need to find module by iterating long relations. |
| CVE-2024-26746 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Ensure safe user copy of completion record If CONFIG_HARDENED_USERCOPY is enabled, copying completion record from event log cache to user triggers a kernel bug. [ 1987.159822] usercopy: Kernel memory exposure attempt detected from SLUB object 'dsa0' (offset 74, size 31)! [ 1987.170845] ------------[ cut here ]------------ [ 1987.176086] kernel BUG at mm/usercopy.c:102! [ 1987.180946] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 1987.186866] CPU: 17 PID: 528 Comm: kworker/17:1 Not tainted 6.8.0-rc2+ #5 [ 1987.194537] Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023 [ 1987.206405] Workqueue: wq0.0 idxd_evl_fault_work [idxd] [ 1987.212338] RIP: 0010:usercopy_abort+0x72/0x90 [ 1987.217381] Code: 58 65 9c 50 48 c7 c2 17 85 61 9c 57 48 c7 c7 98 fd 6b 9c 48 0f 44 d6 48 c7 c6 b3 08 62 9c 4c 89 d1 49 0f 44 f3 e8 1e 2e d5 ff <0f> 0b 49 c7 c1 9e 42 61 9c 4c 89 cf 4d 89 c8 eb a9 66 66 2e 0f 1f [ 1987.238505] RSP: 0018:ff62f5cf20607d60 EFLAGS: 00010246 [ 1987.244423] RAX: 000000000000005f RBX: 000000000000001f RCX: 0000000000000000 [ 1987.252480] RDX: 0000000000000000 RSI: ffffffff9c61429e RDI: 00000000ffffffff [ 1987.260538] RBP: ff62f5cf20607d78 R08: ff2a6a89ef3fffe8 R09: 00000000fffeffff [ 1987.268595] R10: ff2a6a89eed00000 R11: 0000000000000003 R12: ff2a66934849c89a [ 1987.276652] R13: 0000000000000001 R14: ff2a66934849c8b9 R15: ff2a66934849c899 [ 1987.284710] FS: 0000000000000000(0000) GS:ff2a66b22fe40000(0000) knlGS:0000000000000000 [ 1987.293850] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1987.300355] CR2: 00007fe291a37000 CR3: 000000010fbd4005 CR4: 0000000000f71ef0 [ 1987.308413] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1987.316470] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 1987.324527] PKRU: 55555554 [ 1987.327622] Call Trace: [ 1987.330424] <TASK> [ 1987.332826] ? show_regs+0x6e/0x80 [ 1987.336703] ? die+0x3c/0xa0 [ 1987.339988] ? do_trap+0xd4/0xf0 [ 1987.343662] ? do_error_trap+0x75/0xa0 [ 1987.347922] ? usercopy_abort+0x72/0x90 [ 1987.352277] ? exc_invalid_op+0x57/0x80 [ 1987.356634] ? usercopy_abort+0x72/0x90 [ 1987.360988] ? asm_exc_invalid_op+0x1f/0x30 [ 1987.365734] ? usercopy_abort+0x72/0x90 [ 1987.370088] __check_heap_object+0xb7/0xd0 [ 1987.374739] __check_object_size+0x175/0x2d0 [ 1987.379588] idxd_copy_cr+0xa9/0x130 [idxd] [ 1987.384341] idxd_evl_fault_work+0x127/0x390 [idxd] [ 1987.389878] process_one_work+0x13e/0x300 [ 1987.394435] ? __pfx_worker_thread+0x10/0x10 [ 1987.399284] worker_thread+0x2f7/0x420 [ 1987.403544] ? _raw_spin_unlock_irqrestore+0x2b/0x50 [ 1987.409171] ? __pfx_worker_thread+0x10/0x10 [ 1987.414019] kthread+0x107/0x140 [ 1987.417693] ? __pfx_kthread+0x10/0x10 [ 1987.421954] ret_from_fork+0x3d/0x60 [ 1987.426019] ? __pfx_kthread+0x10/0x10 [ 1987.430281] ret_from_fork_asm+0x1b/0x30 [ 1987.434744] </TASK> The issue arises because event log cache is created using kmem_cache_create() which is not suitable for user copy. Fix the issue by creating event log cache with kmem_cache_create_usercopy(), ensuring safe user copy. |
| CVE-2024-26745 | In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV When kdump kernel tries to copy dump data over SR-IOV, LPAR panics due to NULL pointer exception: Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc000000020847ad4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: mlx5_core(+) vmx_crypto pseries_wdt papr_scm libnvdimm mlxfw tls psample sunrpc fuse overlay squashfs loop CPU: 12 PID: 315 Comm: systemd-udevd Not tainted 6.4.0-Test102+ #12 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c000000020847ad4 LR: c00000002083b2dc CTR: 00000000006cd18c REGS: c000000029162ca0 TRAP: 0300 Not tainted (6.4.0-Test102+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48288244 XER: 00000008 CFAR: c00000002083b2d8 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1 ... NIP _find_next_zero_bit+0x24/0x110 LR bitmap_find_next_zero_area_off+0x5c/0xe0 Call Trace: dev_printk_emit+0x38/0x48 (unreliable) iommu_area_alloc+0xc4/0x180 iommu_range_alloc+0x1e8/0x580 iommu_alloc+0x60/0x130 iommu_alloc_coherent+0x158/0x2b0 dma_iommu_alloc_coherent+0x3c/0x50 dma_alloc_attrs+0x170/0x1f0 mlx5_cmd_init+0xc0/0x760 [mlx5_core] mlx5_function_setup+0xf0/0x510 [mlx5_core] mlx5_init_one+0x84/0x210 [mlx5_core] probe_one+0x118/0x2c0 [mlx5_core] local_pci_probe+0x68/0x110 pci_call_probe+0x68/0x200 pci_device_probe+0xbc/0x1a0 really_probe+0x104/0x540 __driver_probe_device+0xb4/0x230 driver_probe_device+0x54/0x130 __driver_attach+0x158/0x2b0 bus_for_each_dev+0xa8/0x130 driver_attach+0x34/0x50 bus_add_driver+0x16c/0x300 driver_register+0xa4/0x1b0 __pci_register_driver+0x68/0x80 mlx5_init+0xb8/0x100 [mlx5_core] do_one_initcall+0x60/0x300 do_init_module+0x7c/0x2b0 At the time of LPAR dump, before kexec hands over control to kdump kernel, DDWs (Dynamic DMA Windows) are scanned and added to the FDT. For the SR-IOV case, default DMA window "ibm,dma-window" is removed from the FDT and DDW added, for the device. Now, kexec hands over control to the kdump kernel. When the kdump kernel initializes, PCI busses are scanned and IOMMU group/tables created, in pci_dma_bus_setup_pSeriesLP(). For the SR-IOV case, there is no "ibm,dma-window". The original commit: b1fc44eaa9ba, fixes the path where memory is pre-mapped (direct mapped) to the DDW. When TCEs are direct mapped, there is no need to initialize IOMMU tables. iommu_table_setparms_lpar() only considers "ibm,dma-window" property when initiallizing IOMMU table. In the scenario where TCEs are dynamically allocated for SR-IOV, newly created IOMMU table is not initialized. Later, when the device driver tries to enter TCEs for the SR-IOV device, NULL pointer execption is thrown from iommu_area_alloc(). The fix is to initialize the IOMMU table with DDW property stored in the FDT. There are 2 points to remember: 1. For the dedicated adapter, kdump kernel would encounter both default and DDW in FDT. In this case, DDW property is used to initialize the IOMMU table. 2. A DDW could be direct or dynamic mapped. kdump kernel would initialize IOMMU table and mark the existing DDW as "dynamic". This works fine since, at the time of table initialization, iommu_table_clear() makes some space in the DDW, for some predefined number of TCEs which are needed for kdump to succeed. |
| CVE-2024-26744 | In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Support specifying the srpt_service_guid parameter Make loading ib_srpt with this parameter set work. The current behavior is that setting that parameter while loading the ib_srpt kernel module triggers the following kernel crash: BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: <TASK> parse_one+0x18c/0x1d0 parse_args+0xe1/0x230 load_module+0x8de/0xa60 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x181/0x240 __x64_sys_finit_module+0x5a/0xb0 do_syscall_64+0x5f/0xe0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 |
| CVE-2024-26743 | In the Linux kernel, the following vulnerability has been resolved: RDMA/qedr: Fix qedr_create_user_qp error flow Avoid the following warning by making sure to free the allocated resources in case that qedr_init_user_queue() fail. -----------[ cut here ]----------- WARNING: CPU: 0 PID: 143192 at drivers/infiniband/core/rdma_core.c:874 uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Modules linked in: tls target_core_user uio target_core_pscsi target_core_file target_core_iblock ib_srpt ib_srp scsi_transport_srp nfsd nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs 8021q garp mrp stp llc ext4 mbcache jbd2 opa_vnic ib_umad ib_ipoib sunrpc rdma_ucm ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm hfi1 intel_rapl_msr intel_rapl_common mgag200 qedr sb_edac drm_shmem_helper rdmavt x86_pkg_temp_thermal drm_kms_helper intel_powerclamp ib_uverbs coretemp i2c_algo_bit kvm_intel dell_wmi_descriptor ipmi_ssif sparse_keymap kvm ib_core rfkill syscopyarea sysfillrect video sysimgblt irqbypass ipmi_si ipmi_devintf fb_sys_fops rapl iTCO_wdt mxm_wmi iTCO_vendor_support intel_cstate pcspkr dcdbas intel_uncore ipmi_msghandler lpc_ich acpi_power_meter mei_me mei fuse drm xfs libcrc32c qede sd_mod ahci libahci t10_pi sg crct10dif_pclmul crc32_pclmul crc32c_intel qed libata tg3 ghash_clmulni_intel megaraid_sas crc8 wmi [last unloaded: ib_srpt] CPU: 0 PID: 143192 Comm: fi_rdm_tagged_p Kdump: loaded Not tainted 5.14.0-408.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 2.14.0 01/25/2022 RIP: 0010:uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Code: 5d 41 5c 41 5d 41 5e e9 0f 26 1b dd 48 89 df e8 67 6a ff ff 49 8b 86 10 01 00 00 48 85 c0 74 9c 4c 89 e7 e8 83 c0 cb dd eb 92 <0f> 0b eb be 0f 0b be 04 00 00 00 48 89 df e8 8e f5 ff ff e9 6d ff RSP: 0018:ffffb7c6cadfbc60 EFLAGS: 00010286 RAX: ffff8f0889ee3f60 RBX: ffff8f088c1a5200 RCX: 00000000802a0016 RDX: 00000000802a0017 RSI: 0000000000000001 RDI: ffff8f0880042600 RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8f11fffd5000 R11: 0000000000039000 R12: ffff8f0d5b36cd80 R13: ffff8f088c1a5250 R14: ffff8f1206d91000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8f11d7c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000147069200e20 CR3: 00000001c7210002 CR4: 00000000001706f0 Call Trace: <TASK> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? ib_uverbs_close+0x1f/0xb0 [ib_uverbs] ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? __warn+0x81/0x110 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? report_bug+0x10a/0x140 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ib_uverbs_close+0x1f/0xb0 [ib_uverbs] __fput+0x94/0x250 task_work_run+0x5c/0x90 do_exit+0x270/0x4a0 do_group_exit+0x2d/0x90 get_signal+0x87c/0x8c0 arch_do_signal_or_restart+0x25/0x100 ? ib_uverbs_ioctl+0xc2/0x110 [ib_uverbs] exit_to_user_mode_loop+0x9c/0x130 exit_to_user_mode_prepare+0xb6/0x100 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 ? common_interrupt+0x43/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x1470abe3ec6b Code: Unable to access opcode bytes at RIP 0x1470abe3ec41. RSP: 002b:00007fff13ce9108 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: fffffffffffffffc RBX: 00007fff13ce9218 RCX: 00001470abe3ec6b RDX: 00007fff13ce9200 RSI: 00000000c0181b01 RDI: 0000000000000004 RBP: 00007fff13ce91e0 R08: 0000558d9655da10 R09: 0000558d9655dd00 R10: 00007fff13ce95c0 R11: 0000000000000246 R12: 00007fff13ce9358 R13: 0000000000000013 R14: 0000558d9655db50 R15: 00007fff13ce9470 </TASK> --[ end trace 888a9b92e04c5c97 ]-- |
| CVE-2024-26742 | In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix disable_managed_interrupts Correct blk-mq registration issue with module parameter disable_managed_interrupts enabled. When we turn off the default PCI_IRQ_AFFINITY flag, the driver needs to register with blk-mq using blk_mq_map_queues(). The driver is currently calling blk_mq_pci_map_queues() which results in a stack trace and possibly undefined behavior. Stack Trace: [ 7.860089] scsi host2: smartpqi [ 7.871934] WARNING: CPU: 0 PID: 238 at block/blk-mq-pci.c:52 blk_mq_pci_map_queues+0xca/0xd0 [ 7.889231] Modules linked in: sd_mod t10_pi sg uas smartpqi(+) crc32c_intel scsi_transport_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ 7.924755] CPU: 0 PID: 238 Comm: kworker/0:3 Not tainted 4.18.0-372.88.1.el8_6_smartpqi_test.x86_64 #1 [ 7.944336] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 03/08/2022 [ 7.963026] Workqueue: events work_for_cpu_fn [ 7.978275] RIP: 0010:blk_mq_pci_map_queues+0xca/0xd0 [ 7.978278] Code: 48 89 de 89 c7 e8 f6 0f 4f 00 3b 05 c4 b7 8e 01 72 e1 5b 31 c0 5d 41 5c 41 5d 41 5e 41 5f e9 7d df 73 00 31 c0 e9 76 df 73 00 <0f> 0b eb bc 90 90 0f 1f 44 00 00 41 57 49 89 ff 41 56 41 55 41 54 [ 7.978280] RSP: 0018:ffffa95fc3707d50 EFLAGS: 00010216 [ 7.978283] RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000010 [ 7.978284] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff9190c32d4310 [ 7.978286] RBP: 0000000000000000 R08: ffffa95fc3707d38 R09: ffff91929b81ac00 [ 7.978287] R10: 0000000000000001 R11: ffffa95fc3707ac0 R12: 0000000000000000 [ 7.978288] R13: ffff9190c32d4000 R14: 00000000ffffffff R15: ffff9190c4c950a8 [ 7.978290] FS: 0000000000000000(0000) GS:ffff9193efc00000(0000) knlGS:0000000000000000 [ 7.978292] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.172814] CR2: 000055d11166c000 CR3: 00000002dae10002 CR4: 00000000007706f0 [ 8.172816] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.172817] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.172818] PKRU: 55555554 [ 8.172819] Call Trace: [ 8.172823] blk_mq_alloc_tag_set+0x12e/0x310 [ 8.264339] scsi_add_host_with_dma.cold.9+0x30/0x245 [ 8.279302] pqi_ctrl_init+0xacf/0xc8e [smartpqi] [ 8.294085] ? pqi_pci_probe+0x480/0x4c8 [smartpqi] [ 8.309015] pqi_pci_probe+0x480/0x4c8 [smartpqi] [ 8.323286] local_pci_probe+0x42/0x80 [ 8.337855] work_for_cpu_fn+0x16/0x20 [ 8.351193] process_one_work+0x1a7/0x360 [ 8.364462] ? create_worker+0x1a0/0x1a0 [ 8.379252] worker_thread+0x1ce/0x390 [ 8.392623] ? create_worker+0x1a0/0x1a0 [ 8.406295] kthread+0x10a/0x120 [ 8.418428] ? set_kthread_struct+0x50/0x50 [ 8.431532] ret_from_fork+0x1f/0x40 [ 8.444137] ---[ end trace 1bf0173d39354506 ]--- |
| CVE-2024-26741 | In the Linux kernel, the following vulnerability has been resolved: dccp/tcp: Unhash sk from ehash for tb2 alloc failure after check_estalblished(). syzkaller reported a warning [0] in inet_csk_destroy_sock() with no repro. WARN_ON(inet_sk(sk)->inet_num && !inet_csk(sk)->icsk_bind_hash); However, the syzkaller's log hinted that connect() failed just before the warning due to FAULT_INJECTION. [1] When connect() is called for an unbound socket, we search for an available ephemeral port. If a bhash bucket exists for the port, we call __inet_check_established() or __inet6_check_established() to check if the bucket is reusable. If reusable, we add the socket into ehash and set inet_sk(sk)->inet_num. Later, we look up the corresponding bhash2 bucket and try to allocate it if it does not exist. Although it rarely occurs in real use, if the allocation fails, we must revert the changes by check_established(). Otherwise, an unconnected socket could illegally occupy an ehash entry. Note that we do not put tw back into ehash because sk might have already responded to a packet for tw and it would be better to free tw earlier under such memory presure. [0]: WARNING: CPU: 0 PID: 350830 at net/ipv4/inet_connection_sock.c:1193 inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Modules linked in: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Code: 41 5c 41 5d 41 5e e9 2d 4a 3d fd e8 28 4a 3d fd 48 89 ef e8 f0 cd 7d ff 5b 5d 41 5c 41 5d 41 5e e9 13 4a 3d fd e8 0e 4a 3d fd <0f> 0b e9 61 fe ff ff e8 02 4a 3d fd 4c 89 e7 be 03 00 00 00 e8 05 RSP: 0018:ffffc9000b21fd38 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000009e78 RCX: ffffffff840bae40 RDX: ffff88806e46c600 RSI: ffffffff840bb012 RDI: ffff88811755cca8 RBP: ffff88811755c880 R08: 0000000000000003 R09: 0000000000000000 R10: 0000000000009e78 R11: 0000000000000000 R12: ffff88811755c8e0 R13: ffff88811755c892 R14: ffff88811755c918 R15: 0000000000000000 FS: 00007f03e5243800(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f21000 CR3: 0000000112ffe001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) dccp_close (net/dccp/proto.c:1078) inet_release (net/ipv4/af_inet.c:434) __sock_release (net/socket.c:660) sock_close (net/socket.c:1423) __fput (fs/file_table.c:377) __fput_sync (fs/file_table.c:462) __x64_sys_close (fs/open.c:1557 fs/open.c:1539 fs/open.c:1539) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f03e53852bb Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 43 c9 f5 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 c9 f5 ff 8b 44 RSP: 002b:00000000005dfba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f03e53852bb RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000167c R10: 0000000008a79680 R11: 0000000000000293 R12: 00007f03e4e43000 R13: 00007f03e4e43170 R14: 00007f03e4e43178 R15: 00007f03e4e43170 </TASK> [1]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 0 PID: 350833 Comm: syz-executor.1 Not tainted 6.7.0-12272-g2121c43f88f5 #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3748) kmem_cache_alloc (mm/slub.c:3763 mm/slub.c:3842 mm/slub.c:3867) inet_bind2_bucket_create ---truncated--- |
| CVE-2024-26740 | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: use the backlog for mirred ingress The test Davide added in commit ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress") hangs our testing VMs every 10 or so runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by lockdep. The problem as previously described by Davide (see Link) is that if we reverse flow of traffic with the redirect (egress -> ingress) we may reach the same socket which generated the packet. And we may still be holding its socket lock. The common solution to such deadlocks is to put the packet in the Rx backlog, rather than run the Rx path inline. Do that for all egress -> ingress reversals, not just once we started to nest mirred calls. In the past there was a concern that the backlog indirection will lead to loss of error reporting / less accurate stats. But the current workaround does not seem to address the issue. |
| CVE-2024-26739 | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: don't override retval if we already lost the skb If we're redirecting the skb, and haven't called tcf_mirred_forward(), yet, we need to tell the core to drop the skb by setting the retcode to SHOT. If we have called tcf_mirred_forward(), however, the skb is out of our hands and returning SHOT will lead to UaF. Move the retval override to the error path which actually need it. |
| CVE-2024-26738 | In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller When a PCI device is dynamically added, the kernel oopses with a NULL pointer dereference: BUG: Kernel NULL pointer dereference on read at 0x00000030 Faulting instruction address: 0xc0000000006bbe5c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8 REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006 CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0 ... NIP sysfs_add_link_to_group+0x34/0x94 LR iommu_device_link+0x5c/0x118 Call Trace: iommu_init_device+0x26c/0x318 (unreliable) iommu_device_link+0x5c/0x118 iommu_init_device+0xa8/0x318 iommu_probe_device+0xc0/0x134 iommu_bus_notifier+0x44/0x104 notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 bus_notify+0x50/0x7c device_add+0x640/0x918 pci_device_add+0x23c/0x298 of_create_pci_dev+0x400/0x884 of_scan_pci_dev+0x124/0x1b0 __of_scan_bus+0x78/0x18c pcibios_scan_phb+0x2a4/0x3b0 init_phb_dynamic+0xb8/0x110 dlpar_add_slot+0x170/0x3b8 [rpadlpar_io] add_slot_store.part.0+0xb4/0x130 [rpadlpar_io] kobj_attr_store+0x2c/0x48 sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x350/0x4a0 ksys_write+0x84/0x140 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec Commit a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") broke DLPAR add of PCI devices. The above added iommu_device structure to pci_controller. During system boot, PCI devices are discovered and this newly added iommu_device structure is initialized by a call to iommu_device_register(). During DLPAR add of a PCI device, a new pci_controller structure is allocated but there are no calls made to iommu_device_register() interface. Fix is to register the iommu device during DLPAR add as well. |
| CVE-2024-26737 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel The following race is possible between bpf_timer_cancel_and_free and bpf_timer_cancel. It will lead a UAF on the timer->timer. bpf_timer_cancel(); spin_lock(); t = timer->time; spin_unlock(); bpf_timer_cancel_and_free(); spin_lock(); t = timer->timer; timer->timer = NULL; spin_unlock(); hrtimer_cancel(&t->timer); kfree(t); /* UAF on t */ hrtimer_cancel(&t->timer); In bpf_timer_cancel_and_free, this patch frees the timer->timer after a rcu grace period. This requires a rcu_head addition to the "struct bpf_hrtimer". Another kfree(t) happens in bpf_timer_init, this does not need a kfree_rcu because it is still under the spin_lock and timer->timer has not been visible by others yet. In bpf_timer_cancel, rcu_read_lock() is added because this helper can be used in a non rcu critical section context (e.g. from a sleepable bpf prog). Other timer->timer usages in helpers.c have been audited, bpf_timer_cancel() is the only place where timer->timer is used outside of the spin_lock. Another solution considered is to mark a t->flag in bpf_timer_cancel and clear it after hrtimer_cancel() is done. In bpf_timer_cancel_and_free, it busy waits for the flag to be cleared before kfree(t). This patch goes with a straight forward solution and frees timer->timer after a rcu grace period. |
| CVE-2024-26736 | In the Linux kernel, the following vulnerability has been resolved: afs: Increase buffer size in afs_update_volume_status() The max length of volume->vid value is 20 characters. So increase idbuf[] size up to 24 to avoid overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. [DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()] |
| CVE-2024-26735 | In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix possible use-after-free and null-ptr-deref The pernet operations structure for the subsystem must be registered before registering the generic netlink family. |
| CVE-2024-26734 | In the Linux kernel, the following vulnerability has been resolved: devlink: fix possible use-after-free and memory leaks in devlink_init() The pernet operations structure for the subsystem must be registered before registering the generic netlink family. Make an unregister in case of unsuccessful registration. |
| CVE-2024-26733 | In the Linux kernel, the following vulnerability has been resolved: arp: Prevent overflow in arp_req_get(). syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6df6dc ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 #31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK> |
| CVE-2024-26732 | In the Linux kernel, the following vulnerability has been resolved: net: implement lockless setsockopt(SO_PEEK_OFF) syzbot reported a lockdep violation [1] involving af_unix support of SO_PEEK_OFF. Since SO_PEEK_OFF is inherently not thread safe (it uses a per-socket sk_peek_off field), there is really no point to enforce a pointless thread safety in the kernel. After this patch : - setsockopt(SO_PEEK_OFF) no longer acquires the socket lock. - skb_consume_udp() no longer has to acquire the socket lock. - af_unix no longer needs a special version of sk_set_peek_off(), because it does not lock u->iolock anymore. As a followup, we could replace prot->set_peek_off to be a boolean and avoid an indirect call, since we always use sk_set_peek_off(). [1] WARNING: possible circular locking dependency detected 6.8.0-rc4-syzkaller-00267-g0f1dd5e91e2b #0 Not tainted syz-executor.2/30025 is trying to acquire lock: ffff8880765e7d80 (&u->iolock){+.+.}-{3:3}, at: unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 but task is already holding lock: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline] ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline] ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_UNIX){+.+.}-{0:0}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 lock_sock_nested+0x48/0x100 net/core/sock.c:3524 lock_sock include/net/sock.h:1691 [inline] __unix_dgram_recvmsg+0x1275/0x12c0 net/unix/af_unix.c:2415 sock_recvmsg_nosec+0x18e/0x1d0 net/socket.c:1046 ____sys_recvmsg+0x3c0/0x470 net/socket.c:2801 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x474/0xae0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 -> #0 (&u->iolock){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 sk_setsockopt+0x207e/0x3360 do_sock_setsockopt+0x2fb/0x720 net/socket.c:2307 __sys_setsockopt+0x1ad/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_UNIX); lock(&u->iolock); lock(sk_lock-AF_UNIX); lock(&u->iolock); *** DEADLOCK *** 1 lock held by syz-executor.2/30025: #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline] #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline] #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193 stack backtrace: CPU: 0 PID: 30025 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00267-g0f1dd5e91e2b #0 Hardware name: Google Google C ---truncated--- |
| CVE-2024-26731 | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready() syzbot reported the following NULL pointer dereference issue [1]: BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:0x0 [...] Call Trace: <TASK> sk_psock_verdict_data_ready+0x232/0x340 net/core/skmsg.c:1230 unix_stream_sendmsg+0x9b4/0x1230 net/unix/af_unix.c:2293 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 If sk_psock_verdict_data_ready() and sk_psock_stop_verdict() are called concurrently, psock->saved_data_ready can be NULL, causing the above issue. This patch fixes this issue by calling the appropriate data ready function using the sk_psock_data_ready() helper and protecting it from concurrency with sk->sk_callback_lock. |
| CVE-2024-26730 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775) Fix access to temperature configuration registers The number of temperature configuration registers does not always match the total number of temperature registers. This can result in access errors reported if KASAN is enabled. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x5654/0x6fe9 nct6775_core |
| CVE-2024-26729 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv Fixes potential null pointer dereference warnings in the dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up() functions. In both functions, the 'dc_dmub_srv' variable was being dereferenced before it was checked for null. This could lead to a null pointer dereference if 'dc_dmub_srv' is null. The fix is to check if 'dc_dmub_srv' is null before dereferencing it. Thus moving the null checks for 'dc_dmub_srv' to the beginning of the functions to ensure that 'dc_dmub_srv' is not null when it is dereferenced. Found by smatch & thus fixing the below: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128) drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164) |
| CVE-2024-26728 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix null-pointer dereference on edid reading Use i2c adapter when there isn't aux_mode in dc_link to fix a null-pointer derefence that happens when running igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector detected as below: [ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0 [ +0.000010] #PF: supervisor read access in kernel mode [ +0.000005] #PF: error_code(0x0000) - not-present page [ +0.000004] PGD 0 P4D 0 [ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152 [ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021 [ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100 [ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16 [ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246 [ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080 [ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0 [ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980 [ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080 [ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f [ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0 [ +0.000003] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000006] <TASK> [ +0.000006] ? __die+0x23/0x70 [ +0.000011] ? page_fault_oops+0x17d/0x4c0 [ +0.000008] ? preempt_count_add+0x6e/0xa0 [ +0.000008] ? srso_alias_return_thunk+0x5/0x7f [ +0.000011] ? exc_page_fault+0x7f/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? i2c_transfer+0xd/0x100 [ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm] [ +0.000067] ? srso_alias_return_thunk+0x5/0x7f [ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm] [ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000042] edid_block_read+0x3b/0xd0 [drm] [ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm] [ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm] [ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu] [ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper] [ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper] [ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu] [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper] [ +0.000000] status_store+0xb2/0x1f0 [drm] [ +0.000000] kernfs_fop_write_iter+0x136/0x1d0 [ +0.000000] vfs_write+0x24d/0x440 [ +0.000000] ksys_write+0x6f/0xf0 [ +0.000000] do_syscall_64+0x60/0xc0 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ +0.000000] RIP: 0033:0x7f9ad46b4b00 [ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 [ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00 [ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009 [ +0.000000] RBP: 0000000000000002 R08 ---truncated--- |
| CVE-2024-26727 | In the Linux kernel, the following vulnerability has been resolved: btrfs: do not ASSERT() if the newly created subvolume already got read [BUG] There is a syzbot crash, triggered by the ASSERT() during subvolume creation: assertion failed: !anon_dev, in fs/btrfs/disk-io.c:1319 ------------[ cut here ]------------ kernel BUG at fs/btrfs/disk-io.c:1319! invalid opcode: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:btrfs_get_root_ref.part.0+0x9aa/0xa60 <TASK> btrfs_get_new_fs_root+0xd3/0xf0 create_subvol+0xd02/0x1650 btrfs_mksubvol+0xe95/0x12b0 __btrfs_ioctl_snap_create+0x2f9/0x4f0 btrfs_ioctl_snap_create+0x16b/0x200 btrfs_ioctl+0x35f0/0x5cf0 __x64_sys_ioctl+0x19d/0x210 do_syscall_64+0x3f/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b ---[ end trace 0000000000000000 ]--- [CAUSE] During create_subvol(), after inserting root item for the newly created subvolume, we would trigger btrfs_get_new_fs_root() to get the btrfs_root of that subvolume. The idea here is, we have preallocated an anonymous device number for the subvolume, thus we can assign it to the new subvolume. But there is really nothing preventing things like backref walk to read the new subvolume. If that happens before we call btrfs_get_new_fs_root(), the subvolume would be read out, with a new anonymous device number assigned already. In that case, we would trigger ASSERT(), as we really expect no one to read out that subvolume (which is not yet accessible from the fs). But things like backref walk is still possible to trigger the read on the subvolume. Thus our assumption on the ASSERT() is not correct in the first place. [FIX] Fix it by removing the ASSERT(), and just free the @anon_dev, reset it to 0, and continue. If the subvolume tree is read out by something else, it should have already get a new anon_dev assigned thus we only need to free the preallocated one. |
| CVE-2024-26726 | In the Linux kernel, the following vulnerability has been resolved: btrfs: don't drop extent_map for free space inode on write error While running the CI for an unrelated change I hit the following panic with generic/648 on btrfs_holes_spacecache. assertion failed: block_start != EXTENT_MAP_HOLE, in fs/btrfs/extent_io.c:1385 ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:1385! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 2695096 Comm: fsstress Kdump: loaded Tainted: G W 6.8.0-rc2+ #1 RIP: 0010:__extent_writepage_io.constprop.0+0x4c1/0x5c0 Call Trace: <TASK> extent_write_cache_pages+0x2ac/0x8f0 extent_writepages+0x87/0x110 do_writepages+0xd5/0x1f0 filemap_fdatawrite_wbc+0x63/0x90 __filemap_fdatawrite_range+0x5c/0x80 btrfs_fdatawrite_range+0x1f/0x50 btrfs_write_out_cache+0x507/0x560 btrfs_write_dirty_block_groups+0x32a/0x420 commit_cowonly_roots+0x21b/0x290 btrfs_commit_transaction+0x813/0x1360 btrfs_sync_file+0x51a/0x640 __x64_sys_fdatasync+0x52/0x90 do_syscall_64+0x9c/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 This happens because we fail to write out the free space cache in one instance, come back around and attempt to write it again. However on the second pass through we go to call btrfs_get_extent() on the inode to get the extent mapping. Because this is a new block group, and with the free space inode we always search the commit root to avoid deadlocking with the tree, we find nothing and return a EXTENT_MAP_HOLE for the requested range. This happens because the first time we try to write the space cache out we hit an error, and on an error we drop the extent mapping. This is normal for normal files, but the free space cache inode is special. We always expect the extent map to be correct. Thus the second time through we end up with a bogus extent map. Since we're deprecating this feature, the most straightforward way to fix this is to simply skip dropping the extent map range for this failed range. I shortened the test by using error injection to stress the area to make it easier to reproduce. With this patch in place we no longer panic with my error injection test. |
| CVE-2024-26725 | In the Linux kernel, the following vulnerability has been resolved: dpll: fix possible deadlock during netlink dump operation Recently, I've been hitting following deadlock warning during dpll pin dump: [52804.637962] ====================================================== [52804.638536] WARNING: possible circular locking dependency detected [52804.639111] 6.8.0-rc2jiri+ #1 Not tainted [52804.639529] ------------------------------------------------------ [52804.640104] python3/2984 is trying to acquire lock: [52804.640581] ffff88810e642678 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}, at: netlink_dump+0xb3/0x780 [52804.641417] but task is already holding lock: [52804.642010] ffffffff83bde4c8 (dpll_lock){+.+.}-{3:3}, at: dpll_lock_dumpit+0x13/0x20 [52804.642747] which lock already depends on the new lock. [52804.643551] the existing dependency chain (in reverse order) is: [52804.644259] -> #1 (dpll_lock){+.+.}-{3:3}: [52804.644836] lock_acquire+0x174/0x3e0 [52804.645271] __mutex_lock+0x119/0x1150 [52804.645723] dpll_lock_dumpit+0x13/0x20 [52804.646169] genl_start+0x266/0x320 [52804.646578] __netlink_dump_start+0x321/0x450 [52804.647056] genl_family_rcv_msg_dumpit+0x155/0x1e0 [52804.647575] genl_rcv_msg+0x1ed/0x3b0 [52804.648001] netlink_rcv_skb+0xdc/0x210 [52804.648440] genl_rcv+0x24/0x40 [52804.648831] netlink_unicast+0x2f1/0x490 [52804.649290] netlink_sendmsg+0x36d/0x660 [52804.649742] __sock_sendmsg+0x73/0xc0 [52804.650165] __sys_sendto+0x184/0x210 [52804.650597] __x64_sys_sendto+0x72/0x80 [52804.651045] do_syscall_64+0x6f/0x140 [52804.651474] entry_SYSCALL_64_after_hwframe+0x46/0x4e [52804.652001] -> #0 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}: [52804.652650] check_prev_add+0x1ae/0x1280 [52804.653107] __lock_acquire+0x1ed3/0x29a0 [52804.653559] lock_acquire+0x174/0x3e0 [52804.653984] __mutex_lock+0x119/0x1150 [52804.654423] netlink_dump+0xb3/0x780 [52804.654845] __netlink_dump_start+0x389/0x450 [52804.655321] genl_family_rcv_msg_dumpit+0x155/0x1e0 [52804.655842] genl_rcv_msg+0x1ed/0x3b0 [52804.656272] netlink_rcv_skb+0xdc/0x210 [52804.656721] genl_rcv+0x24/0x40 [52804.657119] netlink_unicast+0x2f1/0x490 [52804.657570] netlink_sendmsg+0x36d/0x660 [52804.658022] __sock_sendmsg+0x73/0xc0 [52804.658450] __sys_sendto+0x184/0x210 [52804.658877] __x64_sys_sendto+0x72/0x80 [52804.659322] do_syscall_64+0x6f/0x140 [52804.659752] entry_SYSCALL_64_after_hwframe+0x46/0x4e [52804.660281] other info that might help us debug this: [52804.661077] Possible unsafe locking scenario: [52804.661671] CPU0 CPU1 [52804.662129] ---- ---- [52804.662577] lock(dpll_lock); [52804.662924] lock(nlk_cb_mutex-GENERIC); [52804.663538] lock(dpll_lock); [52804.664073] lock(nlk_cb_mutex-GENERIC); [52804.664490] The issue as follows: __netlink_dump_start() calls control->start(cb) with nlk->cb_mutex held. In control->start(cb) the dpll_lock is taken. Then nlk->cb_mutex is released and taken again in netlink_dump(), while dpll_lock still being held. That leads to ABBA deadlock when another CPU races with the same operation. Fix this by moving dpll_lock taking into dumpit() callback which ensures correct lock taking order. |
| CVE-2024-26724 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: DPLL, Fix possible use after free after delayed work timer triggers I managed to hit following use after free warning recently: [ 2169.711665] ================================================================== [ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0 [ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0 [ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2 [ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2169.722457] Call Trace: [ 2169.722756] <IRQ> [ 2169.723024] dump_stack_lvl+0x58/0xb0 [ 2169.723417] print_report+0xc5/0x630 [ 2169.723807] ? __virt_addr_valid+0x126/0x2b0 [ 2169.724268] kasan_report+0xbe/0xf0 [ 2169.724667] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725116] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725570] __run_timers.part.0+0x179/0x4c0 [ 2169.726003] ? call_timer_fn+0x320/0x320 [ 2169.726404] ? lock_downgrade+0x3a0/0x3a0 [ 2169.726820] ? kvm_clock_get_cycles+0x14/0x20 [ 2169.727257] ? ktime_get+0x92/0x150 [ 2169.727630] ? lapic_next_deadline+0x35/0x60 [ 2169.728069] run_timer_softirq+0x40/0x80 [ 2169.728475] __do_softirq+0x1a1/0x509 [ 2169.728866] irq_exit_rcu+0x95/0xc0 [ 2169.729241] sysvec_apic_timer_interrupt+0x6b/0x80 [ 2169.729718] </IRQ> [ 2169.729993] <TASK> [ 2169.730259] asm_sysvec_apic_timer_interrupt+0x16/0x20 [ 2169.730755] RIP: 0010:default_idle+0x13/0x20 [ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00 [ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242 [ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62 [ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55 [ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14 [ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0 [ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200 [ 2169.736478] ? ct_kernel_exit.constprop.0+0xa2/0xc0 [ 2169.736954] ? do_idle+0x285/0x290 [ 2169.737323] default_idle_call+0x63/0x90 [ 2169.737730] do_idle+0x285/0x290 [ 2169.738089] ? arch_cpu_idle_exit+0x30/0x30 [ 2169.738511] ? mark_held_locks+0x1a/0x80 [ 2169.738917] ? lockdep_hardirqs_on_prepare+0x12e/0x200 [ 2169.739417] cpu_startup_entry+0x30/0x40 [ 2169.739825] start_secondary+0x19a/0x1c0 [ 2169.740229] ? set_cpu_sibling_map+0xbd0/0xbd0 [ 2169.740673] secondary_startup_64_no_verify+0x15d/0x16b [ 2169.741179] </TASK> [ 2169.741686] Allocated by task 1098: [ 2169.742058] kasan_save_stack+0x1c/0x40 [ 2169.742456] kasan_save_track+0x10/0x30 [ 2169.742852] __kasan_kmalloc+0x83/0x90 [ 2169.743246] mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll] [ 2169.743730] auxiliary_bus_probe+0x62/0xb0 [ 2169.744148] really_probe+0x127/0x590 [ 2169.744534] __driver_probe_device+0xd2/0x200 [ 2169.744973] device_driver_attach+0x6b/0xf0 [ 2169.745402] bind_store+0x90/0xe0 [ 2169.745761] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.746210] vfs_write+0x41f/0x790 [ 2169.746579] ksys_write+0xc7/0x160 [ 2169.746947] do_syscall_64+0x6f/0x140 [ 2169.747333] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.748049] Freed by task 1220: [ 2169.748393] kasan_save_stack+0x1c/0x40 [ 2169.748789] kasan_save_track+0x10/0x30 [ 2169.749188] kasan_save_free_info+0x3b/0x50 [ 2169.749621] poison_slab_object+0x106/0x180 [ 2169.750044] __kasan_slab_free+0x14/0x50 [ 2169.750451] kfree+0x118/0x330 [ 2169.750792] mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll] [ 2169.751271] auxiliary_bus_remove+0x2e/0x40 [ 2169.751694] device_release_driver_internal+0x24b/0x2e0 [ 2169.752191] unbind_store+0xa6/0xb0 [ 2169.752563] kernfs_fo ---truncated--- |
| CVE-2024-26723 | In the Linux kernel, the following vulnerability has been resolved: lan966x: Fix crash when adding interface under a lag There is a crash when adding one of the lan966x interfaces under a lag interface. The issue can be reproduced like this: ip link add name bond0 type bond miimon 100 mode balance-xor ip link set dev eth0 master bond0 The reason is because when adding a interface under the lag it would go through all the ports and try to figure out which other ports are under that lag interface. And the issue is that lan966x can have ports that are NULL pointer as they are not probed. So then iterating over these ports it would just crash as they are NULL pointers. The fix consists in actually checking for NULL pointers before accessing something from the ports. Like we do in other places. |
| CVE-2024-26722 | In the Linux kernel, the following vulnerability has been resolved: ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work() There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex is left locked forever. That may lead to deadlock when rt5645_jack_detect_work() is called for the second time. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2024-26721 | In the Linux kernel, the following vulnerability has been resolved: drm/i915/dsc: Fix the macro that calculates DSCC_/DSCA_ PPS reg address Commit bd077259d0a9 ("drm/i915/vdsc: Add function to read any PPS register") defines a new macro to calculate the DSC PPS register addresses with PPS number as an input. This macro correctly calculates the addresses till PPS 11 since the addresses increment by 4. So in that case the following macro works correctly to give correct register address: _MMIO(_DSCA_PPS_0 + (pps) * 4) However after PPS 11, the register address for PPS 12 increments by 12 because of RC Buffer memory allocation in between. Because of this discontinuity in the address space, the macro calculates wrong addresses for PPS 12 - 16 resulting into incorrect DSC PPS parameter value read/writes causing DSC corruption. This fixes it by correcting this macro to add the offset of 12 for PPS >=12. v3: Add correct paranthesis for pps argument (Jani Nikula) (cherry picked from commit 6074be620c31dc2ae11af96a1a5ea95580976fb5) |
| CVE-2024-26720 | In the Linux kernel, the following vulnerability has been resolved: mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again (struct dirty_throttle_control *)->thresh is an unsigned long, but is passed as the u32 divisor argument to div_u64(). On architectures where unsigned long is 64 bytes, the argument will be implicitly truncated. Use div64_u64() instead of div_u64() so that the value used in the "is this a safe division" check is the same as the divisor. Also, remove redundant cast of the numerator to u64, as that should happen implicitly. This would be difficult to exploit in memcg domain, given the ratio-based arithmetic domain_drity_limits() uses, but is much easier in global writeback domain with a BDI_CAP_STRICTLIMIT-backing device, using e.g. vm.dirty_bytes=(1<<32)*PAGE_SIZE so that dtc->thresh == (1<<32) |
| CVE-2024-26719 | In the Linux kernel, the following vulnerability has been resolved: nouveau: offload fence uevents work to workqueue This should break the deadlock between the fctx lock and the irq lock. This offloads the processing off the work from the irq into a workqueue. |
| CVE-2024-26718 | In the Linux kernel, the following vulnerability has been resolved: dm-crypt, dm-verity: disable tasklets Tasklets have an inherent problem with memory corruption. The function tasklet_action_common calls tasklet_trylock, then it calls the tasklet callback and then it calls tasklet_unlock. If the tasklet callback frees the structure that contains the tasklet or if it calls some code that may free it, tasklet_unlock will write into free memory. The commits 8e14f610159d and d9a02e016aaf try to fix it for dm-crypt, but it is not a sufficient fix and the data corruption can still happen [1]. There is no fix for dm-verity and dm-verity will write into free memory with every tasklet-processed bio. There will be atomic workqueues implemented in the kernel 6.9 [2]. They will have better interface and they will not suffer from the memory corruption problem. But we need something that stops the memory corruption now and that can be backported to the stable kernels. So, I'm proposing this commit that disables tasklets in both dm-crypt and dm-verity. This commit doesn't remove the tasklet support, because the tasklet code will be reused when atomic workqueues will be implemented. [1] https://lore.kernel.org/all/[email protected]/T/ [2] https://lore.kernel.org/lkml/[email protected]/ |
| CVE-2024-26717 | In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid-of: fix NULL-deref on failed power up A while back the I2C HID implementation was split in an ACPI and OF part, but the new OF driver never initialises the client pointer which is dereferenced on power-up failures. |
| CVE-2024-26716 | In the Linux kernel, the following vulnerability has been resolved: usb: core: Prevent null pointer dereference in update_port_device_state Currently, the function update_port_device_state gets the usb_hub from udev->parent by calling usb_hub_to_struct_hub. However, in case the actconfig or the maxchild is 0, the usb_hub would be NULL and upon further accessing to get port_dev would result in null pointer dereference. Fix this by introducing an if check after the usb_hub is populated. |
| CVE-2024-26715 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend In current scenario if Plug-out and Plug-In performed continuously there could be a chance while checking for dwc->gadget_driver in dwc3_gadget_suspend, a NULL pointer dereference may occur. Call Stack: CPU1: CPU2: gadget_unbind_driver dwc3_suspend_common dwc3_gadget_stop dwc3_gadget_suspend dwc3_disconnect_gadget CPU1 basically clears the variable and CPU2 checks the variable. Consider CPU1 is running and right before gadget_driver is cleared and in parallel CPU2 executes dwc3_gadget_suspend where it finds dwc->gadget_driver which is not NULL and resumes execution and then CPU1 completes execution. CPU2 executes dwc3_disconnect_gadget where it checks dwc->gadget_driver is already NULL because of which the NULL pointer deference occur. |
| CVE-2024-26714 | In the Linux kernel, the following vulnerability has been resolved: interconnect: qcom: sc8180x: Mark CO0 BCM keepalive The CO0 BCM needs to be up at all times, otherwise some hardware (like the UFS controller) loses its connection to the rest of the SoC, resulting in a hang of the platform, accompanied by a spectacular logspam. Mark it as keepalive to prevent such cases. |
| CVE-2024-26713 | In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add When a PCI device is dynamically added, the kernel oopses with a NULL pointer dereference: BUG: Kernel NULL pointer dereference on read at 0x00000030 Faulting instruction address: 0xc0000000006bbe5c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8 REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006 CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0 ... NIP sysfs_add_link_to_group+0x34/0x94 LR iommu_device_link+0x5c/0x118 Call Trace: iommu_init_device+0x26c/0x318 (unreliable) iommu_device_link+0x5c/0x118 iommu_init_device+0xa8/0x318 iommu_probe_device+0xc0/0x134 iommu_bus_notifier+0x44/0x104 notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 bus_notify+0x50/0x7c device_add+0x640/0x918 pci_device_add+0x23c/0x298 of_create_pci_dev+0x400/0x884 of_scan_pci_dev+0x124/0x1b0 __of_scan_bus+0x78/0x18c pcibios_scan_phb+0x2a4/0x3b0 init_phb_dynamic+0xb8/0x110 dlpar_add_slot+0x170/0x3b8 [rpadlpar_io] add_slot_store.part.0+0xb4/0x130 [rpadlpar_io] kobj_attr_store+0x2c/0x48 sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x350/0x4a0 ksys_write+0x84/0x140 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec Commit a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") broke DLPAR add of PCI devices. The above added iommu_device structure to pci_controller. During system boot, PCI devices are discovered and this newly added iommu_device structure is initialized by a call to iommu_device_register(). During DLPAR add of a PCI device, a new pci_controller structure is allocated but there are no calls made to iommu_device_register() interface. Fix is to register the iommu device during DLPAR add as well. [mpe: Trim oops and tweak some change log wording] |
| CVE-2024-26712 | In the Linux kernel, the following vulnerability has been resolved: powerpc/kasan: Fix addr error caused by page alignment In kasan_init_region, when k_start is not page aligned, at the begin of for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then `va = block + k_cur - k_start` is less than block, the addr va is invalid, because the memory address space from va to block is not alloced by memblock_alloc, which will not be reserved by memblock_reserve later, it will be used by other places. As a result, memory overwriting occurs. for example: int __init __weak kasan_init_region(void *start, size_t size) { [...] /* if say block(dcd97000) k_start(feef7400) k_end(feeff3fe) */ block = memblock_alloc(k_end - k_start, PAGE_SIZE); [...] for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) { /* at the begin of for loop * block(dcd97000) va(dcd96c00) k_cur(feef7000) k_start(feef7400) * va(dcd96c00) is less than block(dcd97000), va is invalid */ void *va = block + k_cur - k_start; [...] } [...] } Therefore, page alignment is performed on k_start before memblock_alloc() to ensure the validity of the VA address. |
| CVE-2024-26711 | In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4130: zero-initialize clock init data The clk_init_data struct does not have all its members initialized, causing issues when trying to expose the internal clock on the CLK pin. Fix this by zero-initializing the clk_init_data struct. |
| CVE-2024-26710 | In the Linux kernel, the following vulnerability has been resolved: powerpc/kasan: Limit KASAN thread size increase to 32KB KASAN is seen to increase stack usage, to the point that it was reported to lead to stack overflow on some 32-bit machines (see link). To avoid overflows the stack size was doubled for KASAN builds in commit 3e8635fb2e07 ("powerpc/kasan: Force thread size increase with KASAN"). However with a 32KB stack size to begin with, the doubling leads to a 64KB stack, which causes build errors: arch/powerpc/kernel/switch.S:249: Error: operand out of range (0x000000000000fe50 is not between 0xffffffffffff8000 and 0x0000000000007fff) Although the asm could be reworked, in practice a 32KB stack seems sufficient even for KASAN builds - the additional usage seems to be in the 2-3KB range for a 64-bit KASAN build. So only increase the stack for KASAN if the stack size is < 32KB. |
| CVE-2024-26709 | In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach The function spapr_tce_platform_iommu_attach_dev() is missing to call iommu_group_put() when the domain is already set. This refcount leak shows up with BUG_ON() during DLPAR remove operation as: KernelBug: Kernel bug in state 'None': kernel BUG at arch/powerpc/platforms/pseries/iommu.c:100! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=8192 NUMA pSeries <snip> Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_016) hv:phyp pSeries NIP: c0000000000ff4d4 LR: c0000000000ff4cc CTR: 0000000000000000 REGS: c0000013aed5f840 TRAP: 0700 Tainted: G I (6.8.0-rc3-autotest-g99bd3cb0d12e) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 44002402 XER: 20040000 CFAR: c000000000a0d170 IRQMASK: 0 ... NIP iommu_reconfig_notifier+0x94/0x200 LR iommu_reconfig_notifier+0x8c/0x200 Call Trace: iommu_reconfig_notifier+0x8c/0x200 (unreliable) notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 of_reconfig_notify+0x44/0xdc of_detach_node+0x78/0xb0 ofdt_write.part.0+0x86c/0xbb8 proc_reg_write+0xf4/0x150 vfs_write+0xf8/0x488 ksys_write+0x84/0x140 system_call_exception+0x138/0x330 system_call_vectored_common+0x15c/0x2ec The patch adds the missing iommu_group_put() call. |
| CVE-2024-26708 | In the Linux kernel, the following vulnerability has been resolved: mptcp: really cope with fastopen race Fastopen and PM-trigger subflow shutdown can race, as reported by syzkaller. In my first attempt to close such race, I missed the fact that the subflow status can change again before the subflow_state_change callback is invoked. Address the issue additionally copying with all the states directly reachable from TCP_FIN_WAIT1. |
| CVE-2024-26707 | In the Linux kernel, the following vulnerability has been resolved: net: hsr: remove WARN_ONCE() in send_hsr_supervision_frame() Syzkaller reported [1] hitting a warning after failing to allocate resources for skb in hsr_init_skb(). Since a WARN_ONCE() call will not help much in this case, it might be prudent to switch to netdev_warn_once(). At the very least it will suppress syzkaller reports such as [1]. Just in case, use netdev_warn_once() in send_prp_supervision_frame() for similar reasons. [1] HSR: Could not send supervision frame WARNING: CPU: 1 PID: 85 at net/hsr/hsr_device.c:294 send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 RIP: 0010:send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 ... Call Trace: <IRQ> hsr_announce+0x114/0x370 net/hsr/hsr_device.c:382 call_timer_fn+0x193/0x590 kernel/time/timer.c:1700 expire_timers kernel/time/timer.c:1751 [inline] __run_timers+0x764/0xb20 kernel/time/timer.c:2022 run_timer_softirq+0x58/0xd0 kernel/time/timer.c:2035 __do_softirq+0x21a/0x8de kernel/softirq.c:553 invoke_softirq kernel/softirq.c:427 [inline] __irq_exit_rcu kernel/softirq.c:632 [inline] irq_exit_rcu+0xb7/0x120 kernel/softirq.c:644 sysvec_apic_timer_interrupt+0x95/0xb0 arch/x86/kernel/apic/apic.c:1076 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:649 ... This issue is also found in older kernels (at least up to 5.10). |
| CVE-2024-26706 | In the Linux kernel, the following vulnerability has been resolved: parisc: Fix random data corruption from exception handler The current exception handler implementation, which assists when accessing user space memory, may exhibit random data corruption if the compiler decides to use a different register than the specified register %r29 (defined in ASM_EXCEPTIONTABLE_REG) for the error code. If the compiler choose another register, the fault handler will nevertheless store -EFAULT into %r29 and thus trash whatever this register is used for. Looking at the assembly I found that this happens sometimes in emulate_ldd(). To solve the issue, the easiest solution would be if it somehow is possible to tell the fault handler which register is used to hold the error code. Using %0 or %1 in the inline assembly is not posssible as it will show up as e.g. %r29 (with the "%r" prefix), which the GNU assembler can not convert to an integer. This patch takes another, better and more flexible approach: We extend the __ex_table (which is out of the execution path) by one 32-word. In this word we tell the compiler to insert the assembler instruction "or %r0,%r0,%reg", where %reg references the register which the compiler choosed for the error return code. In case of an access failure, the fault handler finds the __ex_table entry and can examine the opcode. The used register is encoded in the lowest 5 bits, and the fault handler can then store -EFAULT into this register. Since we extend the __ex_table to 3 words we can't use the BUILDTIME_TABLE_SORT config option any longer. |
| CVE-2024-26705 | In the Linux kernel, the following vulnerability has been resolved: parisc: BTLB: Fix crash when setting up BTLB at CPU bringup When using hotplug and bringing up a 32-bit CPU, ask the firmware about the BTLB information to set up the static (block) TLB entries. For that write access to the static btlb_info struct is needed, but since it is marked __ro_after_init the kernel segfaults with missing write permissions. Fix the crash by dropping the __ro_after_init annotation. |
| CVE-2024-26704 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix double-free of blocks due to wrong extents moved_len In ext4_move_extents(), moved_len is only updated when all moves are successfully executed, and only discards orig_inode and donor_inode preallocations when moved_len is not zero. When the loop fails to exit after successfully moving some extents, moved_len is not updated and remains at 0, so it does not discard the preallocations. If the moved extents overlap with the preallocated extents, the overlapped extents are freed twice in ext4_mb_release_inode_pa() and ext4_process_freed_data() (as described in commit 94d7c16cbbbd ("ext4: Fix double-free of blocks with EXT4_IOC_MOVE_EXT")), and bb_free is incremented twice. Hence when trim is executed, a zero-division bug is triggered in mb_update_avg_fragment_size() because bb_free is not zero and bb_fragments is zero. Therefore, update move_len after each extent move to avoid the issue. |
| CVE-2024-26703 | In the Linux kernel, the following vulnerability has been resolved: tracing/timerlat: Move hrtimer_init to timerlat_fd open() Currently, the timerlat's hrtimer is initialized at the first read of timerlat_fd, and destroyed at close(). It works, but it causes an error if the user program open() and close() the file without reading. Here's an example: # echo NO_OSNOISE_WORKLOAD > /sys/kernel/debug/tracing/osnoise/options # echo timerlat > /sys/kernel/debug/tracing/current_tracer # cat <<EOF > ./timerlat_load.py # !/usr/bin/env python3 timerlat_fd = open("/sys/kernel/tracing/osnoise/per_cpu/cpu0/timerlat_fd", 'r') timerlat_fd.close(); EOF # ./taskset -c 0 ./timerlat_load.py <BOOM> BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 2673 Comm: python3 Not tainted 6.6.13-200.fc39.x86_64 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:hrtimer_active+0xd/0x50 Code: 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 57 30 <8b> 42 10 a8 01 74 09 f3 90 8b 42 10 a8 01 75 f7 80 7f 38 00 75 1d RSP: 0018:ffffb031009b7e10 EFLAGS: 00010286 RAX: 000000000002db00 RBX: ffff9118f786db08 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9117a0e64400 RDI: ffff9118f786db08 RBP: ffff9118f786db80 R08: ffff9117a0ddd420 R09: ffff9117804d4f70 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9118f786db08 R13: ffff91178fdd5e20 R14: ffff9117840978c0 R15: 0000000000000000 FS: 00007f2ffbab1740(0000) GS:ffff9118f7840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 00000001b402e000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? srso_alias_return_thunk+0x5/0x7f ? avc_has_extended_perms+0x237/0x520 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? hrtimer_active+0xd/0x50 hrtimer_cancel+0x15/0x40 timerlat_fd_release+0x48/0xe0 __fput+0xf5/0x290 __x64_sys_close+0x3d/0x80 do_syscall_64+0x60/0x90 ? srso_alias_return_thunk+0x5/0x7f ? __x64_sys_ioctl+0x72/0xd0 ? srso_alias_return_thunk+0x5/0x7f ? syscall_exit_to_user_mode+0x2b/0x40 ? srso_alias_return_thunk+0x5/0x7f ? do_syscall_64+0x6c/0x90 ? srso_alias_return_thunk+0x5/0x7f ? exit_to_user_mode_prepare+0x142/0x1f0 ? srso_alias_return_thunk+0x5/0x7f ? syscall_exit_to_user_mode+0x2b/0x40 ? srso_alias_return_thunk+0x5/0x7f ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f2ffb321594 Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 cd 0d 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3c c3 0f 1f 00 55 48 89 e5 48 83 ec 10 89 7d RSP: 002b:00007ffe8d8eef18 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 RAX: ffffffffffffffda RBX: 00007f2ffba4e668 RCX: 00007f2ffb321594 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007ffe8d8eef40 R08: 0000000000000000 R09: 0000000000000000 R10: 55c926e3167eae79 R11: 0000000000000202 R12: 0000000000000003 R13: 00007ffe8d8ef030 R14: 0000000000000000 R15: 00007f2ffba4e668 </TASK> CR2: 0000000000000010 ---[ end trace 0000000000000000 ]--- Move hrtimer_init to timerlat_fd open() to avoid this problem. |
| CVE-2024-26702 | In the Linux kernel, the following vulnerability has been resolved: iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC Recently, we encounter kernel crash in function rm3100_common_probe caused by out of bound access of array rm3100_samp_rates (because of underlying hardware failures). Add boundary check to prevent out of bound access. |
| CVE-2024-26700 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix MST Null Ptr for RV The change try to fix below error specific to RV platform: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 ? _copy_to_user+0x25/0x30 ? drm_ioctl+0x296/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 drm_ioctl_kernel+0xcd/0x170 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 amdgpu_drm_ioctl+0x4e/0x90 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4dad17f76f Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c> RSP: 002b:00007ffd9ae859f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055e255a55900 RCX: 00007f4dad17f76f RDX: 00007ffd9ae85a90 RSI: 00000000c03864bc RDI: 000000000000000b RBP: 00007ffd9ae85a90 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c03864bc R13: 000000000000000b R14: 000055e255a7fc60 R15: 000055e255a01eb0 </TASK> Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device ccm cmac algif_hash algif_skcipher af_alg joydev mousedev bnep > typec libphy k10temp ipmi_msghandler roles i2c_scmi acpi_cpufreq mac_hid nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_mas> CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000 ---truncated--- |
| CVE-2024-26699 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr [Why] There is a potential memory access violation while iterating through array of dcn35 clks. [How] Limit iteration per array size. |
| CVE-2024-26698 | In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove In commit ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel"), napi_disable was getting called for all channels, including all subchannels without confirming if they are enabled or not. This caused hv_netvsc getting hung at napi_disable, when netvsc_probe() has finished running but nvdev->subchan_work has not started yet. netvsc_subchan_work() -> rndis_set_subchannel() has not created the sub-channels and because of that netvsc_sc_open() is not running. netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which netvsc_subchan_work did not run. netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the opposite. Now during netvsc_device_remove(), when napi_disable is called for those subchannels, napi_disable gets stuck on infinite msleep. This fix addresses this problem by ensuring that napi_disable() is not getting called for non-enabled NAPI struct. But netif_napi_del() is still necessary for these non-enabled NAPI struct for cleanup purpose. Call trace: [ 654.559417] task:modprobe state:D stack: 0 pid: 2321 ppid: 1091 flags:0x00004002 [ 654.568030] Call Trace: [ 654.571221] <TASK> [ 654.573790] __schedule+0x2d6/0x960 [ 654.577733] schedule+0x69/0xf0 [ 654.581214] schedule_timeout+0x87/0x140 [ 654.585463] ? __bpf_trace_tick_stop+0x20/0x20 [ 654.590291] msleep+0x2d/0x40 [ 654.593625] napi_disable+0x2b/0x80 [ 654.597437] netvsc_device_remove+0x8a/0x1f0 [hv_netvsc] [ 654.603935] rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc] [ 654.611101] ? do_wait_intr+0xb0/0xb0 [ 654.615753] netvsc_remove+0x7c/0x120 [hv_netvsc] [ 654.621675] vmbus_remove+0x27/0x40 [hv_vmbus] |
| CVE-2024-26697 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix data corruption in dsync block recovery for small block sizes The helper function nilfs_recovery_copy_block() of nilfs_recovery_dsync_blocks(), which recovers data from logs created by data sync writes during a mount after an unclean shutdown, incorrectly calculates the on-page offset when copying repair data to the file's page cache. In environments where the block size is smaller than the page size, this flaw can cause data corruption and leak uninitialized memory bytes during the recovery process. Fix these issues by correcting this byte offset calculation on the page. |
| CVE-2024-26696 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix hang in nilfs_lookup_dirty_data_buffers() Syzbot reported a hang issue in migrate_pages_batch() called by mbind() and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2. While migrate_pages_batch() locks a folio and waits for the writeback to complete, the log writer thread that should bring the writeback to completion picks up the folio being written back in nilfs_lookup_dirty_data_buffers() that it calls for subsequent log creation and was trying to lock the folio. Thus causing a deadlock. In the first place, it is unexpected that folios/pages in the middle of writeback will be updated and become dirty. Nilfs2 adds a checksum to verify the validity of the log being written and uses it for recovery at mount, so data changes during writeback are suppressed. Since this is broken, an unclean shutdown could potentially cause recovery to fail. Investigation revealed that the root cause is that the wait for writeback completion in nilfs_page_mkwrite() is conditional, and if the backing device does not require stable writes, data may be modified without waiting. Fix these issues by making nilfs_page_mkwrite() wait for writeback to finish regardless of the stable write requirement of the backing device. |
| CVE-2024-26695 | In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix null pointer dereference in __sev_platform_shutdown_locked The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ #311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] <TASK> [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x1 ---truncated--- |
| CVE-2024-26694 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix double-free bug The storage for the TLV PC register data wasn't done like all the other storage in the drv->fw area, which is cleared at the end of deallocation. Therefore, the freeing must also be done differently, explicitly NULL'ing it out after the free, since otherwise there's a nasty double-free bug here if a file fails to load after this has been parsed, and we get another free later (e.g. because no other file exists.) Fix that by adding the missing NULL assignment. |
| CVE-2024-26693 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix a crash when we run out of stations A DoS tool that injects loads of authentication frames made our AP crash. The iwl_mvm_is_dup() function couldn't find the per-queue dup_data which was not allocated. The root cause for that is that we ran out of stations in the firmware and we didn't really add the station to the firmware, yet we didn't return an error to mac80211. Mac80211 was thinking that we have the station and because of that, sta_info::uploaded was set to 1. This allowed ieee80211_find_sta_by_ifaddr() to return a valid station object, but that ieee80211_sta didn't have any iwl_mvm_sta object initialized and that caused the crash mentioned earlier when we got Rx on that station. |
| CVE-2024-26692 | In the Linux kernel, the following vulnerability has been resolved: smb: Fix regression in writes when non-standard maximum write size negotiated The conversion to netfs in the 6.3 kernel caused a regression when maximum write size is set by the server to an unexpected value which is not a multiple of 4096 (similarly if the user overrides the maximum write size by setting mount parm "wsize", but sets it to a value that is not a multiple of 4096). When negotiated write size is not a multiple of 4096 the netfs code can skip the end of the final page when doing large sequential writes, causing data corruption. This section of code is being rewritten/removed due to a large netfs change, but until that point (ie for the 6.3 kernel until now) we can not support non-standard maximum write sizes. Add a warning if a user specifies a wsize on mount that is not a multiple of 4096 (and round down), also add a change where we round down the maximum write size if the server negotiates a value that is not a multiple of 4096 (we also have to check to make sure that we do not round it down to zero). |
| CVE-2024-26691 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix circular locking dependency The rule inside kvm enforces that the vcpu->mutex is taken *inside* kvm->lock. The rule is violated by the pkvm_create_hyp_vm() which acquires the kvm->lock while already holding the vcpu->mutex lock from kvm_vcpu_ioctl(). Avoid the circular locking dependency altogether by protecting the hyp vm handle with the config_lock, much like we already do for other forms of VM-scoped data. |
| CVE-2024-26690 | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: protect updates of 64-bit statistics counters As explained by a comment in <linux/u64_stats_sync.h>, write side of struct u64_stats_sync must ensure mutual exclusion, or one seqcount update could be lost on 32-bit platforms, thus blocking readers forever. Such lockups have been observed in real world after stmmac_xmit() on one CPU raced with stmmac_napi_poll_tx() on another CPU. To fix the issue without introducing a new lock, split the statics into three parts: 1. fields updated only under the tx queue lock, 2. fields updated only during NAPI poll, 3. fields updated only from interrupt context, Updates to fields in the first two groups are already serialized through other locks. It is sufficient to split the existing struct u64_stats_sync so that each group has its own. Note that tx_set_ic_bit is updated from both contexts. Split this counter so that each context gets its own, and calculate their sum to get the total value in stmmac_get_ethtool_stats(). For the third group, multiple interrupts may be processed by different CPUs at the same time, but interrupts on the same CPU will not nest. Move fields from this group to a newly created per-cpu struct stmmac_pcpu_stats. |
| CVE-2024-26689 | In the Linux kernel, the following vulnerability has been resolved: ceph: prevent use-after-free in encode_cap_msg() In fs/ceph/caps.c, in encode_cap_msg(), "use after free" error was caught by KASAN at this line - 'ceph_buffer_get(arg->xattr_buf);'. This implies before the refcount could be increment here, it was freed. In same file, in "handle_cap_grant()" refcount is decremented by this line - 'ceph_buffer_put(ci->i_xattrs.blob);'. It appears that a race occurred and resource was freed by the latter line before the former line could increment it. encode_cap_msg() is called by __send_cap() and __send_cap() is called by ceph_check_caps() after calling __prep_cap(). __prep_cap() is where arg->xattr_buf is assigned to ci->i_xattrs.blob. This is the spot where the refcount must be increased to prevent "use after free" error. |
| CVE-2024-26688 | In the Linux kernel, the following vulnerability has been resolved: fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super When configuring a hugetlb filesystem via the fsconfig() syscall, there is a possible NULL dereference in hugetlbfs_fill_super() caused by assigning NULL to ctx->hstate in hugetlbfs_parse_param() when the requested pagesize is non valid. E.g: Taking the following steps: fd = fsopen("hugetlbfs", FSOPEN_CLOEXEC); fsconfig(fd, FSCONFIG_SET_STRING, "pagesize", "1024", 0); fsconfig(fd, FSCONFIG_CMD_CREATE, NULL, NULL, 0); Given that the requested "pagesize" is invalid, ctxt->hstate will be replaced with NULL, losing its previous value, and we will print an error: ... ... case Opt_pagesize: ps = memparse(param->string, &rest); ctx->hstate = h; if (!ctx->hstate) { pr_err("Unsupported page size %lu MB\n", ps / SZ_1M); return -EINVAL; } return 0; ... ... This is a problem because later on, we will dereference ctxt->hstate in hugetlbfs_fill_super() ... ... sb->s_blocksize = huge_page_size(ctx->hstate); ... ... Causing below Oops. Fix this by replacing cxt->hstate value only when then pagesize is known to be valid. kernel: hugetlbfs: Unsupported page size 0 MB kernel: BUG: kernel NULL pointer dereference, address: 0000000000000028 kernel: #PF: supervisor read access in kernel mode kernel: #PF: error_code(0x0000) - not-present page kernel: PGD 800000010f66c067 P4D 800000010f66c067 PUD 1b22f8067 PMD 0 kernel: Oops: 0000 [#1] PREEMPT SMP PTI kernel: CPU: 4 PID: 5659 Comm: syscall Tainted: G E 6.8.0-rc2-default+ #22 5a47c3fef76212addcc6eb71344aabc35190ae8f kernel: Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017 kernel: RIP: 0010:hugetlbfs_fill_super+0xb4/0x1a0 kernel: Code: 48 8b 3b e8 3e c6 ed ff 48 85 c0 48 89 45 20 0f 84 d6 00 00 00 48 b8 ff ff ff ff ff ff ff 7f 4c 89 e7 49 89 44 24 20 48 8b 03 <8b> 48 28 b8 00 10 00 00 48 d3 e0 49 89 44 24 18 48 8b 03 8b 40 28 kernel: RSP: 0018:ffffbe9960fcbd48 EFLAGS: 00010246 kernel: RAX: 0000000000000000 RBX: ffff9af5272ae780 RCX: 0000000000372004 kernel: RDX: ffffffffffffffff RSI: ffffffffffffffff RDI: ffff9af555e9b000 kernel: RBP: ffff9af52ee66b00 R08: 0000000000000040 R09: 0000000000370004 kernel: R10: ffffbe9960fcbd48 R11: 0000000000000040 R12: ffff9af555e9b000 kernel: R13: ffffffffa66b86c0 R14: ffff9af507d2f400 R15: ffff9af507d2f400 kernel: FS: 00007ffbc0ba4740(0000) GS:ffff9b0bd7000000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000028 CR3: 00000001b1ee0000 CR4: 00000000001506f0 kernel: Call Trace: kernel: <TASK> kernel: ? __die_body+0x1a/0x60 kernel: ? page_fault_oops+0x16f/0x4a0 kernel: ? search_bpf_extables+0x65/0x70 kernel: ? fixup_exception+0x22/0x310 kernel: ? exc_page_fault+0x69/0x150 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10 kernel: ? hugetlbfs_fill_super+0xb4/0x1a0 kernel: ? hugetlbfs_fill_super+0x28/0x1a0 kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10 kernel: vfs_get_super+0x40/0xa0 kernel: ? __pfx_bpf_lsm_capable+0x10/0x10 kernel: vfs_get_tree+0x25/0xd0 kernel: vfs_cmd_create+0x64/0xe0 kernel: __x64_sys_fsconfig+0x395/0x410 kernel: do_syscall_64+0x80/0x160 kernel: ? syscall_exit_to_user_mode+0x82/0x240 kernel: ? do_syscall_64+0x8d/0x160 kernel: ? syscall_exit_to_user_mode+0x82/0x240 kernel: ? do_syscall_64+0x8d/0x160 kernel: ? exc_page_fault+0x69/0x150 kernel: entry_SYSCALL_64_after_hwframe+0x6e/0x76 kernel: RIP: 0033:0x7ffbc0cb87c9 kernel: Code: 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 96 0d 00 f7 d8 64 89 01 48 kernel: RSP: 002b:00007ffc29d2f388 EFLAGS: 00000206 ORIG_RAX: 00000000000001af kernel: RAX: fffffffffff ---truncated--- |
| CVE-2024-26687 | In the Linux kernel, the following vulnerability has been resolved: xen/events: close evtchn after mapping cleanup shutdown_pirq and startup_pirq are not taking the irq_mapping_update_lock because they can't due to lock inversion. Both are called with the irq_desc->lock being taking. The lock order, however, is first irq_mapping_update_lock and then irq_desc->lock. This opens multiple races: - shutdown_pirq can be interrupted by a function that allocates an event channel: CPU0 CPU1 shutdown_pirq { xen_evtchn_close(e) __startup_pirq { EVTCHNOP_bind_pirq -> returns just freed evtchn e set_evtchn_to_irq(e, irq) } xen_irq_info_cleanup() { set_evtchn_to_irq(e, -1) } } Assume here event channel e refers here to the same event channel number. After this race the evtchn_to_irq mapping for e is invalid (-1). - __startup_pirq races with __unbind_from_irq in a similar way. Because __startup_pirq doesn't take irq_mapping_update_lock it can grab the evtchn that __unbind_from_irq is currently freeing and cleaning up. In this case even though the event channel is allocated, its mapping can be unset in evtchn_to_irq. The fix is to first cleanup the mappings and then close the event channel. In this way, when an event channel gets allocated it's potential previous evtchn_to_irq mappings are guaranteed to be unset already. This is also the reverse order of the allocation where first the event channel is allocated and then the mappings are setup. On a 5.10 kernel prior to commit 3fcdaf3d7634 ("xen/events: modify internal [un]bind interfaces"), we hit a BUG like the following during probing of NVMe devices. The issue is that during nvme_setup_io_queues, pci_free_irq is called for every device which results in a call to shutdown_pirq. With many nvme devices it's therefore likely to hit this race during boot because there will be multiple calls to shutdown_pirq and startup_pirq are running potentially in parallel. ------------[ cut here ]------------ blkfront: xvda: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled; bounce buffer: enabled kernel BUG at drivers/xen/events/events_base.c:499! invalid opcode: 0000 [#1] SMP PTI CPU: 44 PID: 375 Comm: kworker/u257:23 Not tainted 5.10.201-191.748.amzn2.x86_64 #1 Hardware name: Xen HVM domU, BIOS 4.11.amazon 08/24/2006 Workqueue: nvme-reset-wq nvme_reset_work RIP: 0010:bind_evtchn_to_cpu+0xdf/0xf0 Code: 5d 41 5e c3 cc cc cc cc 44 89 f7 e8 2b 55 ad ff 49 89 c5 48 85 c0 0f 84 64 ff ff ff 4c 8b 68 30 41 83 fe ff 0f 85 60 ff ff ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00 RSP: 0000:ffffc9000d533b08 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000028 RSI: 00000000ffffffff RDI: 00000000ffffffff RBP: ffff888107419680 R08: 0000000000000000 R09: ffffffff82d72b00 R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000001ed R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffff88bc8b500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000002610001 CR4: 00000000001706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? show_trace_log_lvl+0x1c1/0x2d9 ? show_trace_log_lvl+0x1c1/0x2d9 ? set_affinity_irq+0xdc/0x1c0 ? __die_body.cold+0x8/0xd ? die+0x2b/0x50 ? do_trap+0x90/0x110 ? bind_evtchn_to_cpu+0xdf/0xf0 ? do_error_trap+0x65/0x80 ? bind_evtchn_to_cpu+0xdf/0xf0 ? exc_invalid_op+0x4e/0x70 ? bind_evtchn_to_cpu+0xdf/0xf0 ? asm_exc_invalid_op+0x12/0x20 ? bind_evtchn_to_cpu+0xdf/0x ---truncated--- |
| CVE-2024-26686 | In the Linux kernel, the following vulnerability has been resolved: fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats lock_task_sighand() can trigger a hard lockup. If NR_CPUS threads call do_task_stat() at the same time and the process has NR_THREADS, it will spin with irqs disabled O(NR_CPUS * NR_THREADS) time. Change do_task_stat() to use sig->stats_lock to gather the statistics outside of ->siglock protected section, in the likely case this code will run lockless. |
| CVE-2024-26685 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential bug in end_buffer_async_write According to a syzbot report, end_buffer_async_write(), which handles the completion of block device writes, may detect abnormal condition of the buffer async_write flag and cause a BUG_ON failure when using nilfs2. Nilfs2 itself does not use end_buffer_async_write(). But, the async_write flag is now used as a marker by commit 7f42ec394156 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks") as a means of resolving double list insertion of dirty blocks in nilfs_lookup_dirty_data_buffers() and nilfs_lookup_node_buffers() and the resulting crash. This modification is safe as long as it is used for file data and b-tree node blocks where the page caches are independent. However, it was irrelevant and redundant to also introduce async_write for segment summary and super root blocks that share buffers with the backing device. This led to the possibility that the BUG_ON check in end_buffer_async_write would fail as described above, if independent writebacks of the backing device occurred in parallel. The use of async_write for segment summary buffers has already been removed in a previous change. Fix this issue by removing the manipulation of the async_write flag for the remaining super root block buffer. |
| CVE-2024-26684 | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: xgmac: fix handling of DPP safety error for DMA channels Commit 56e58d6c8a56 ("net: stmmac: Implement Safety Features in XGMAC core") checks and reports safety errors, but leaves the Data Path Parity Errors for each channel in DMA unhandled at all, lead to a storm of interrupt. Fix it by checking and clearing the DMA_DPP_Interrupt_Status register. |
| CVE-2024-26683 | In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: detect stuck ECSA element in probe resp We recently added some validation that we don't try to connect to an AP that is currently in a channel switch process, since that might want the channel to be quiet or we might not be able to connect in time to hear the switching in a beacon. This was in commit c09c4f31998b ("wifi: mac80211: don't connect to an AP while it's in a CSA process"). However, we promptly got a report that this caused new connection failures, and it turns out that the AP that we now cannot connect to is permanently advertising an extended channel switch announcement, even with quiet. The AP in question was an Asus RT-AC53, with firmware 3.0.0.4.380_10760-g21a5898. As a first step, attempt to detect that we're dealing with such a situation, so mac80211 can use this later. |
| CVE-2024-26682 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: improve CSA/ECSA connection refusal As mentioned in the previous commit, we pretty quickly found that some APs have ECSA elements stuck in their probe response, so using that to not attempt to connect while CSA is happening we never connect to such an AP. Improve this situation by checking more carefully and ignoring the ECSA if cfg80211 has previously detected the ECSA element being stuck in the probe response. Additionally, allow connecting to an AP that's switching to a channel it's already using, unless it's using quiet mode. In this case, we may just have to adjust bandwidth later. If it's actually switching channels, it's better not to try to connect in the middle of that. |
| CVE-2024-26681 | In the Linux kernel, the following vulnerability has been resolved: netdevsim: avoid potential loop in nsim_dev_trap_report_work() Many syzbot reports include the following trace [1] If nsim_dev_trap_report_work() can not grab the mutex, it should rearm itself at least one jiffie later. [1] Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 32383 Comm: kworker/0:2 Not tainted 6.8.0-rc2-syzkaller-00031-g861c0981648f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Workqueue: events nsim_dev_trap_report_work RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:89 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:104 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:129 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:161 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0x101/0x190 mm/kasan/generic.c:189 Code: 07 49 39 d1 75 0a 45 3a 11 b8 01 00 00 00 7c 0b 44 89 c2 e8 21 ed ff ff 83 f0 01 5b 5d 41 5c c3 48 85 d2 74 4f 48 01 ea eb 09 <48> 83 c0 01 48 39 d0 74 41 80 38 00 74 f2 eb b6 41 bc 08 00 00 00 RSP: 0018:ffffc90012dcf998 EFLAGS: 00000046 RAX: fffffbfff258af1e RBX: fffffbfff258af1f RCX: ffffffff8168eda3 RDX: fffffbfff258af1f RSI: 0000000000000004 RDI: ffffffff92c578f0 RBP: fffffbfff258af1e R08: 0000000000000000 R09: fffffbfff258af1e R10: ffffffff92c578f3 R11: ffffffff8acbcbc0 R12: 0000000000000002 R13: ffff88806db38400 R14: 1ffff920025b9f42 R15: ffffffff92c578e8 FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00994e078 CR3: 000000002c250000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> instrument_atomic_read include/linux/instrumented.h:68 [inline] atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline] queued_spin_is_locked include/asm-generic/qspinlock.h:57 [inline] debug_spin_unlock kernel/locking/spinlock_debug.c:101 [inline] do_raw_spin_unlock+0x53/0x230 kernel/locking/spinlock_debug.c:141 __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:150 [inline] _raw_spin_unlock_irqrestore+0x22/0x70 kernel/locking/spinlock.c:194 debug_object_activate+0x349/0x540 lib/debugobjects.c:726 debug_work_activate kernel/workqueue.c:578 [inline] insert_work+0x30/0x230 kernel/workqueue.c:1650 __queue_work+0x62e/0x11d0 kernel/workqueue.c:1802 __queue_delayed_work+0x1bf/0x270 kernel/workqueue.c:1953 queue_delayed_work_on+0x106/0x130 kernel/workqueue.c:1989 queue_delayed_work include/linux/workqueue.h:563 [inline] schedule_delayed_work include/linux/workqueue.h:677 [inline] nsim_dev_trap_report_work+0x9c0/0xc80 drivers/net/netdevsim/dev.c:842 process_one_work+0x886/0x15d0 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x8b9/0x1290 kernel/workqueue.c:2787 kthread+0x2c6/0x3a0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 </TASK> |
| CVE-2024-26680 | In the Linux kernel, the following vulnerability has been resolved: net: atlantic: Fix DMA mapping for PTP hwts ring Function aq_ring_hwts_rx_alloc() maps extra AQ_CFG_RXDS_DEF bytes for PTP HWTS ring but then generic aq_ring_free() does not take this into account. Create and use a specific function to free HWTS ring to fix this issue. Trace: [ 215.351607] ------------[ cut here ]------------ [ 215.351612] DMA-API: atlantic 0000:4b:00.0: device driver frees DMA memory with different size [device address=0x00000000fbdd0000] [map size=34816 bytes] [unmap size=32768 bytes] [ 215.351635] WARNING: CPU: 33 PID: 10759 at kernel/dma/debug.c:988 check_unmap+0xa6f/0x2360 ... [ 215.581176] Call Trace: [ 215.583632] <TASK> [ 215.585745] ? show_trace_log_lvl+0x1c4/0x2df [ 215.590114] ? show_trace_log_lvl+0x1c4/0x2df [ 215.594497] ? debug_dma_free_coherent+0x196/0x210 [ 215.599305] ? check_unmap+0xa6f/0x2360 [ 215.603147] ? __warn+0xca/0x1d0 [ 215.606391] ? check_unmap+0xa6f/0x2360 [ 215.610237] ? report_bug+0x1ef/0x370 [ 215.613921] ? handle_bug+0x3c/0x70 [ 215.617423] ? exc_invalid_op+0x14/0x50 [ 215.621269] ? asm_exc_invalid_op+0x16/0x20 [ 215.625480] ? check_unmap+0xa6f/0x2360 [ 215.629331] ? mark_lock.part.0+0xca/0xa40 [ 215.633445] debug_dma_free_coherent+0x196/0x210 [ 215.638079] ? __pfx_debug_dma_free_coherent+0x10/0x10 [ 215.643242] ? slab_free_freelist_hook+0x11d/0x1d0 [ 215.648060] dma_free_attrs+0x6d/0x130 [ 215.651834] aq_ring_free+0x193/0x290 [atlantic] [ 215.656487] aq_ptp_ring_free+0x67/0x110 [atlantic] ... [ 216.127540] ---[ end trace 6467e5964dd2640b ]--- [ 216.132160] DMA-API: Mapped at: [ 216.132162] debug_dma_alloc_coherent+0x66/0x2f0 [ 216.132165] dma_alloc_attrs+0xf5/0x1b0 [ 216.132168] aq_ring_hwts_rx_alloc+0x150/0x1f0 [atlantic] [ 216.132193] aq_ptp_ring_alloc+0x1bb/0x540 [atlantic] [ 216.132213] aq_nic_init+0x4a1/0x760 [atlantic] |
| CVE-2024-26679 | In the Linux kernel, the following vulnerability has been resolved: inet: read sk->sk_family once in inet_recv_error() inet_recv_error() is called without holding the socket lock. IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM socket option and trigger a KCSAN warning. |
| CVE-2024-26678 | In the Linux kernel, the following vulnerability has been resolved: x86/efistub: Use 1:1 file:memory mapping for PE/COFF .compat section The .compat section is a dummy PE section that contains the address of the 32-bit entrypoint of the 64-bit kernel image if it is bootable from 32-bit firmware (i.e., CONFIG_EFI_MIXED=y) This section is only 8 bytes in size and is only referenced from the loader, and so it is placed at the end of the memory view of the image, to avoid the need for padding it to 4k, which is required for sections appearing in the middle of the image. Unfortunately, this violates the PE/COFF spec, and even if most EFI loaders will work correctly (including the Tianocore reference implementation), PE loaders do exist that reject such images, on the basis that both the file and memory views of the file contents should be described by the section headers in a monotonically increasing manner without leaving any gaps. So reorganize the sections to avoid this issue. This results in a slight padding overhead (< 4k) which can be avoided if desired by disabling CONFIG_EFI_MIXED (which is only needed in rare cases these days) |
| CVE-2024-26677 | In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix delayed ACKs to not set the reference serial number Fix the construction of delayed ACKs to not set the reference serial number as they can't be used as an RTT reference. |
| CVE-2024-26676 | In the Linux kernel, the following vulnerability has been resolved: af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC. syzbot reported a warning [0] in __unix_gc() with a repro, which creates a socketpair and sends one socket's fd to itself using the peer. socketpair(AF_UNIX, SOCK_STREAM, 0, [3, 4]) = 0 sendmsg(4, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="\360", iov_len=1}], msg_iovlen=1, msg_control=[{cmsg_len=20, cmsg_level=SOL_SOCKET, cmsg_type=SCM_RIGHTS, cmsg_data=[3]}], msg_controllen=24, msg_flags=0}, MSG_OOB|MSG_PROBE|MSG_DONTWAIT|MSG_ZEROCOPY) = 1 This forms a self-cyclic reference that GC should finally untangle but does not due to lack of MSG_OOB handling, resulting in memory leak. Recently, commit 11498715f266 ("af_unix: Remove io_uring code for GC.") removed io_uring's dead code in GC and revealed the problem. The code was executed at the final stage of GC and unconditionally moved all GC candidates from gc_candidates to gc_inflight_list. That papered over the reported problem by always making the following WARN_ON_ONCE(!list_empty(&gc_candidates)) false. The problem has been there since commit 2aab4b969002 ("af_unix: fix struct pid leaks in OOB support") added full scm support for MSG_OOB while fixing another bug. To fix this problem, we must call kfree_skb() for unix_sk(sk)->oob_skb if the socket still exists in gc_candidates after purging collected skb. Then, we need to set NULL to oob_skb before calling kfree_skb() because it calls last fput() and triggers unix_release_sock(), where we call duplicate kfree_skb(u->oob_skb) if not NULL. Note that the leaked socket remained being linked to a global list, so kmemleak also could not detect it. We need to check /proc/net/protocol to notice the unfreed socket. [0]: WARNING: CPU: 0 PID: 2863 at net/unix/garbage.c:345 __unix_gc+0xc74/0xe80 net/unix/garbage.c:345 Modules linked in: CPU: 0 PID: 2863 Comm: kworker/u4:11 Not tainted 6.8.0-rc1-syzkaller-00583-g1701940b1a02 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Workqueue: events_unbound __unix_gc RIP: 0010:__unix_gc+0xc74/0xe80 net/unix/garbage.c:345 Code: 8b 5c 24 50 e9 86 f8 ff ff e8 f8 e4 22 f8 31 d2 48 c7 c6 30 6a 69 89 4c 89 ef e8 97 ef ff ff e9 80 f9 ff ff e8 dd e4 22 f8 90 <0f> 0b 90 e9 7b fd ff ff 48 89 df e8 5c e7 7c f8 e9 d3 f8 ff ff e8 RSP: 0018:ffffc9000b03fba0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffc9000b03fc10 RCX: ffffffff816c493e RDX: ffff88802c02d940 RSI: ffffffff896982f3 RDI: ffffc9000b03fb30 RBP: ffffc9000b03fce0 R08: 0000000000000001 R09: fffff52001607f66 R10: 0000000000000003 R11: 0000000000000002 R12: dffffc0000000000 R13: ffffc9000b03fc10 R14: ffffc9000b03fc10 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005559c8677a60 CR3: 000000000d57a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> process_one_work+0x889/0x15e0 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x8b9/0x12a0 kernel/workqueue.c:2787 kthread+0x2c6/0x3b0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242 </TASK> |
| CVE-2024-26675 | In the Linux kernel, the following vulnerability has been resolved: ppp_async: limit MRU to 64K syzbot triggered a warning [1] in __alloc_pages(): WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp) Willem fixed a similar issue in commit c0a2a1b0d631 ("ppp: limit MRU to 64K") Adopt the same sanity check for ppp_async_ioctl(PPPIOCSMRU) [1]: WARNING: CPU: 1 PID: 11 at mm/page_alloc.c:4543 __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 Modules linked in: CPU: 1 PID: 11 Comm: kworker/u4:0 Not tainted 6.8.0-rc2-syzkaller-g41bccc98fb79 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Workqueue: events_unbound flush_to_ldisc pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 lr : __alloc_pages+0xc8/0x698 mm/page_alloc.c:4537 sp : ffff800093967580 x29: ffff800093967660 x28: ffff8000939675a0 x27: dfff800000000000 x26: ffff70001272ceb4 x25: 0000000000000000 x24: ffff8000939675c0 x23: 0000000000000000 x22: 0000000000060820 x21: 1ffff0001272ceb8 x20: ffff8000939675e0 x19: 0000000000000010 x18: ffff800093967120 x17: ffff800083bded5c x16: ffff80008ac97500 x15: 0000000000000005 x14: 1ffff0001272cebc x13: 0000000000000000 x12: 0000000000000000 x11: ffff70001272cec1 x10: 1ffff0001272cec0 x9 : 0000000000000001 x8 : ffff800091c91000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 00000000ffffffff x4 : 0000000000000000 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : ffff8000939675e0 Call trace: __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] __kmalloc_large_node+0xbc/0x1fc mm/slub.c:3926 __do_kmalloc_node mm/slub.c:3969 [inline] __kmalloc_node_track_caller+0x418/0x620 mm/slub.c:4001 kmalloc_reserve+0x17c/0x23c net/core/skbuff.c:590 __alloc_skb+0x1c8/0x3d8 net/core/skbuff.c:651 __netdev_alloc_skb+0xb8/0x3e8 net/core/skbuff.c:715 netdev_alloc_skb include/linux/skbuff.h:3235 [inline] dev_alloc_skb include/linux/skbuff.h:3248 [inline] ppp_async_input drivers/net/ppp/ppp_async.c:863 [inline] ppp_asynctty_receive+0x588/0x186c drivers/net/ppp/ppp_async.c:341 tty_ldisc_receive_buf+0x12c/0x15c drivers/tty/tty_buffer.c:390 tty_port_default_receive_buf+0x74/0xac drivers/tty/tty_port.c:37 receive_buf drivers/tty/tty_buffer.c:444 [inline] flush_to_ldisc+0x284/0x6e4 drivers/tty/tty_buffer.c:494 process_one_work+0x694/0x1204 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:2787 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 |
| CVE-2024-26674 | In the Linux kernel, the following vulnerability has been resolved: x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups During memory error injection test on kernels >= v6.4, the kernel panics like below. However, this issue couldn't be reproduced on kernels <= v6.3. mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134 mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20} mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86 mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490 mce: [Hardware Error]: Run the above through 'mcelog --ascii' mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel Kernel panic - not syncing: Fatal local machine check The MCA code can recover from an in-kernel #MC if the fixup type is EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT the only thing that is raised for an in-kernel #MC is a panic. ex_handler_uaccess() would warn if users gave a non-canonical addresses (with bit 63 clear) to {get, put}_user(), which was unexpected. Therefore, commit b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()") replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user() fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic. Commit 6014bc27561f ("x86-64: make access_ok() independent of LAM") added the check gp_fault_address_ok() right before the WARN_ONCE() in ex_handler_uaccess() to not warn about non-canonical user addresses due to LAM. With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user() exception fixups in order to be able to handle in-kernel MCEs correctly again. [ bp: Massage commit message. ] |
| CVE-2024-26673 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations - Disallow families other than NFPROTO_{IPV4,IPV6,INET}. - Disallow layer 4 protocol with no ports, since destination port is a mandatory attribute for this object. |
| CVE-2024-26672 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()' Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c:377 amdgpu_mca_smu_get_mca_entry() warn: variable dereferenced before check 'mca_funcs' (see line 368) 357 int amdgpu_mca_smu_get_mca_entry(struct amdgpu_device *adev, enum amdgpu_mca_error_type type, 358 int idx, struct mca_bank_entry *entry) 359 { 360 const struct amdgpu_mca_smu_funcs *mca_funcs = adev->mca.mca_funcs; 361 int count; 362 363 switch (type) { 364 case AMDGPU_MCA_ERROR_TYPE_UE: 365 count = mca_funcs->max_ue_count; mca_funcs is dereferenced here. 366 break; 367 case AMDGPU_MCA_ERROR_TYPE_CE: 368 count = mca_funcs->max_ce_count; mca_funcs is dereferenced here. 369 break; 370 default: 371 return -EINVAL; 372 } 373 374 if (idx >= count) 375 return -EINVAL; 376 377 if (mca_funcs && mca_funcs->mca_get_mca_entry) ^^^^^^^^^ Checked too late! |
| CVE-2024-26671 | In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix IO hang from sbitmap wakeup race In blk_mq_mark_tag_wait(), __add_wait_queue() may be re-ordered with the following blk_mq_get_driver_tag() in case of getting driver tag failure. Then in __sbitmap_queue_wake_up(), waitqueue_active() may not observe the added waiter in blk_mq_mark_tag_wait() and wake up nothing, meantime blk_mq_mark_tag_wait() can't get driver tag successfully. This issue can be reproduced by running the following test in loop, and fio hang can be observed in < 30min when running it on my test VM in laptop. modprobe -r scsi_debug modprobe scsi_debug delay=0 dev_size_mb=4096 max_queue=1 host_max_queue=1 submit_queues=4 dev=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename` fio --filename=/dev/"$dev" --direct=1 --rw=randrw --bs=4k --iodepth=1 \ --runtime=100 --numjobs=40 --time_based --name=test \ --ioengine=libaio Fix the issue by adding one explicit barrier in blk_mq_mark_tag_wait(), which is just fine in case of running out of tag. |
| CVE-2024-26670 | In the Linux kernel, the following vulnerability has been resolved: arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD Currently the ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround isn't quite right, as it is supposed to be applied after the last explicit memory access, but is immediately followed by an LDR. The ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround is used to handle Cortex-A520 erratum 2966298 and Cortex-A510 erratum 3117295, which are described in: * https://developer.arm.com/documentation/SDEN2444153/0600/?lang=en * https://developer.arm.com/documentation/SDEN1873361/1600/?lang=en In both cases the workaround is described as: | If pagetable isolation is disabled, the context switch logic in the | kernel can be updated to execute the following sequence on affected | cores before exiting to EL0, and after all explicit memory accesses: | | 1. A non-shareable TLBI to any context and/or address, including | unused contexts or addresses, such as a `TLBI VALE1 Xzr`. | | 2. A DSB NSH to guarantee completion of the TLBI. The important part being that the TLBI+DSB must be placed "after all explicit memory accesses". Unfortunately, as-implemented, the TLBI+DSB is immediately followed by an LDR, as we have: | alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD | tlbi vale1, xzr | dsb nsh | alternative_else_nop_endif | alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0 | ldr lr, [sp, #S_LR] | add sp, sp, #PT_REGS_SIZE // restore sp | eret | alternative_else_nop_endif | | [ ... KPTI exception return path ... ] This patch fixes this by reworking the logic to place the TLBI+DSB immediately before the ERET, after all explicit memory accesses. The ERET is currently in a separate alternative block, and alternatives cannot be nested. To account for this, the alternative block for ARM64_UNMAP_KERNEL_AT_EL0 is replaced with a single alternative branch to skip the KPTI logic, with the new shape of the logic being: | alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0 | [ ... KPTI exception return path ... ] | .L_skip_tramp_exit_\@: | | ldr lr, [sp, #S_LR] | add sp, sp, #PT_REGS_SIZE // restore sp | | alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD | tlbi vale1, xzr | dsb nsh | alternative_else_nop_endif | eret The new structure means that the workaround is only applied when KPTI is not in use; this is fine as noted in the documented implications of the erratum: | Pagetable isolation between EL0 and higher level ELs prevents the | issue from occurring. ... and as per the workaround description quoted above, the workaround is only necessary "If pagetable isolation is disabled". |
| CVE-2024-26669 | In the Linux kernel, the following vulnerability has been resolved: net/sched: flower: Fix chain template offload When a qdisc is deleted from a net device the stack instructs the underlying driver to remove its flow offload callback from the associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack then continues to replay the removal of the filters in the block for this driver by iterating over the chains in the block and invoking the 'reoffload' operation of the classifier being used. In turn, the classifier in its 'reoffload' operation prepares and emits a 'FLOW_CLS_DESTROY' command for each filter. However, the stack does not do the same for chain templates and the underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when a qdisc is deleted. This results in a memory leak [1] which can be reproduced using [2]. Fix by introducing a 'tmplt_reoffload' operation and have the stack invoke it with the appropriate arguments as part of the replay. Implement the operation in the sole classifier that supports chain templates (flower) by emitting the 'FLOW_CLS_TMPLT_{CREATE,DESTROY}' command based on whether a flow offload callback is being bound to a filter block or being unbound from one. As far as I can tell, the issue happens since cited commit which reordered tcf_block_offload_unbind() before tcf_block_flush_all_chains() in __tcf_block_put(). The order cannot be reversed as the filter block is expected to be freed after flushing all the chains. [1] unreferenced object 0xffff888107e28800 (size 2048): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): b1 a6 7c 11 81 88 ff ff e0 5b b3 10 81 88 ff ff ..|......[...... 01 00 00 00 00 00 00 00 e0 aa b0 84 ff ff ff ff ................ backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab374e>] __kmalloc+0x4e/0x90 [<ffffffff832aec6d>] mlxsw_sp_acl_ruleset_get+0x34d/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [<ffffffff8379d29a>] ___sys_sendmsg+0x13a/0x1e0 [<ffffffff8379d50c>] __sys_sendmsg+0x11c/0x1f0 [<ffffffff843b9ce0>] do_syscall_64+0x40/0xe0 unreferenced object 0xffff88816d2c0400 (size 1024): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): 40 00 00 00 00 00 00 00 57 f6 38 be 00 00 00 00 @.......W.8..... 10 04 2c 6d 81 88 ff ff 10 04 2c 6d 81 88 ff ff ..,m......,m.... backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab36c1>] __kmalloc_node+0x51/0x90 [<ffffffff81a8ed96>] kvmalloc_node+0xa6/0x1f0 [<ffffffff82827d03>] bucket_table_alloc.isra.0+0x83/0x460 [<ffffffff82828d2b>] rhashtable_init+0x43b/0x7c0 [<ffffffff832aed48>] mlxsw_sp_acl_ruleset_get+0x428/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [2] # tc qdisc add dev swp1 clsact # tc chain add dev swp1 ingress proto ip chain 1 flower dst_ip 0.0.0.0/32 # tc qdisc del dev ---truncated--- |
| CVE-2024-26668 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_limit: reject configurations that cause integer overflow Reject bogus configs where internal token counter wraps around. This only occurs with very very large requests, such as 17gbyte/s. Its better to reject this rather than having incorrect ratelimit. |
| CVE-2024-26667 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output") introduced a smatch warning about another conditional block in dpu_encoder_helper_phys_cleanup() which had assumed hw_pp will always be valid which may not necessarily be true. Lets fix the other conditional block by making sure hw_pp is valid before dereferencing it. Patchwork: https://patchwork.freedesktop.org/patch/574878/ |
| CVE-2024-26666 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix RCU use in TDLS fast-xmit This looks up the link under RCU protection, but isn't guaranteed to actually have protection. Fix that. |
| CVE-2024-26665 | In the Linux kernel, the following vulnerability has been resolved: tunnels: fix out of bounds access when building IPv6 PMTU error If the ICMPv6 error is built from a non-linear skb we get the following splat, BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240 Read of size 4 at addr ffff88811d402c80 by task netperf/820 CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543 ... kasan_report+0xd8/0x110 do_csum+0x220/0x240 csum_partial+0xc/0x20 skb_tunnel_check_pmtu+0xeb9/0x3280 vxlan_xmit_one+0x14c2/0x4080 vxlan_xmit+0xf61/0x5c00 dev_hard_start_xmit+0xfb/0x510 __dev_queue_xmit+0x7cd/0x32a0 br_dev_queue_push_xmit+0x39d/0x6a0 Use skb_checksum instead of csum_partial who cannot deal with non-linear SKBs. |
| CVE-2024-26664 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Fix out-of-bounds memory access Fix a bug that pdata->cpu_map[] is set before out-of-bounds check. The problem might be triggered on systems with more than 128 cores per package. |
| CVE-2024-26663 | In the Linux kernel, the following vulnerability has been resolved: tipc: Check the bearer type before calling tipc_udp_nl_bearer_add() syzbot reported the following general protection fault [1]: general protection fault, probably for non-canonical address 0xdffffc0000000010: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000080-0x0000000000000087] ... RIP: 0010:tipc_udp_is_known_peer+0x9c/0x250 net/tipc/udp_media.c:291 ... Call Trace: <TASK> tipc_udp_nl_bearer_add+0x212/0x2f0 net/tipc/udp_media.c:646 tipc_nl_bearer_add+0x21e/0x360 net/tipc/bearer.c:1089 genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972 genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline] genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2544 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1367 netlink_sendmsg+0x8b7/0xd70 net/netlink/af_netlink.c:1909 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b The cause of this issue is that when tipc_nl_bearer_add() is called with the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called even if the bearer is not UDP. tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that the media_ptr field of the tipc_bearer has an udp_bearer type object, so the function goes crazy for non-UDP bearers. This patch fixes the issue by checking the bearer type before calling tipc_udp_nl_bearer_add() in tipc_nl_bearer_add(). |
| CVE-2024-26662 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()' 'panel_cntl' structure used to control the display panel could be null, dereferencing it could lead to a null pointer access. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250) |
| CVE-2024-26661 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()' In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;" pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to ensure the tg is not NULL. |
| CVE-2024-26660 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Implement bounds check for stream encoder creation in DCN301 'stream_enc_regs' array is an array of dcn10_stream_enc_registers structures. The array is initialized with four elements, corresponding to the four calls to stream_enc_regs() in the array initializer. This means that valid indices for this array are 0, 1, 2, and 3. The error message 'stream_enc_regs' 4 <= 5 below, is indicating that there is an attempt to access this array with an index of 5, which is out of bounds. This could lead to undefined behavior Here, eng_id is used as an index to access the stream_enc_regs array. If eng_id is 5, this would result in an out-of-bounds access on the stream_enc_regs array. Thus fixing Buffer overflow error in dcn301_stream_encoder_create reported by Smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5 |
| CVE-2024-26659 | In the Linux kernel, the following vulnerability has been resolved: xhci: handle isoc Babble and Buffer Overrun events properly xHCI 4.9 explicitly forbids assuming that the xHC has released its ownership of a multi-TRB TD when it reports an error on one of the early TRBs. Yet the driver makes such assumption and releases the TD, allowing the remaining TRBs to be freed or overwritten by new TDs. The xHC should also report completion of the final TRB due to its IOC flag being set by us, regardless of prior errors. This event cannot be recognized if the TD has already been freed earlier, resulting in "Transfer event TRB DMA ptr not part of current TD" error message. Fix this by reusing the logic for processing isoc Transaction Errors. This also handles hosts which fail to report the final completion. Fix transfer length reporting on Babble errors. They may be caused by device malfunction, no guarantee that the buffer has been filled. |
| CVE-2024-26658 | In the Linux kernel, the following vulnerability has been resolved: bcachefs: grab s_umount only if snapshotting When I was testing mongodb over bcachefs with compression, there is a lockdep warning when snapshotting mongodb data volume. $ cat test.sh prog=bcachefs $prog subvolume create /mnt/data $prog subvolume create /mnt/data/snapshots while true;do $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s) sleep 1s done $ cat /etc/mongodb.conf systemLog: destination: file logAppend: true path: /mnt/data/mongod.log storage: dbPath: /mnt/data/ lockdep reports: [ 3437.452330] ====================================================== [ 3437.452750] WARNING: possible circular locking dependency detected [ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E [ 3437.453562] ------------------------------------------------------ [ 3437.453981] bcachefs/35533 is trying to acquire lock: [ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190 [ 3437.454875] but task is already holding lock: [ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.456009] which lock already depends on the new lock. [ 3437.456553] the existing dependency chain (in reverse order) is: [ 3437.457054] -> #3 (&type->s_umount_key#48){.+.+}-{3:3}: [ 3437.457507] down_read+0x3e/0x170 [ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.458206] __x64_sys_ioctl+0x93/0xd0 [ 3437.458498] do_syscall_64+0x42/0xf0 [ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.459155] -> #2 (&c->snapshot_create_lock){++++}-{3:3}: [ 3437.459615] down_read+0x3e/0x170 [ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs] [ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs] [ 3437.460686] notify_change+0x1f1/0x4a0 [ 3437.461283] do_truncate+0x7f/0xd0 [ 3437.461555] path_openat+0xa57/0xce0 [ 3437.461836] do_filp_open+0xb4/0x160 [ 3437.462116] do_sys_openat2+0x91/0xc0 [ 3437.462402] __x64_sys_openat+0x53/0xa0 [ 3437.462701] do_syscall_64+0x42/0xf0 [ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.463359] -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}: [ 3437.463843] down_write+0x3b/0xc0 [ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs] [ 3437.464493] vfs_write+0x21b/0x4c0 [ 3437.464653] ksys_write+0x69/0xf0 [ 3437.464839] do_syscall_64+0x42/0xf0 [ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.465231] -> #0 (sb_writers#10){.+.+}-{0:0}: [ 3437.465471] __lock_acquire+0x1455/0x21b0 [ 3437.465656] lock_acquire+0xc6/0x2b0 [ 3437.465822] mnt_want_write+0x46/0x1a0 [ 3437.465996] filename_create+0x62/0x190 [ 3437.466175] user_path_create+0x2d/0x50 [ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.466617] __x64_sys_ioctl+0x93/0xd0 [ 3437.466791] do_syscall_64+0x42/0xf0 [ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.467180] other info that might help us debug this: [ 3437.469670] 2 locks held by bcachefs/35533: other info that might help us debug this: [ 3437.467507] Chain exists of: sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48 [ 3437.467979] Possible unsafe locking scenario: [ 3437.468223] CPU0 CPU1 [ 3437.468405] ---- ---- [ 3437.468585] rlock(&type->s_umount_key#48); [ 3437.468758] lock(&c->snapshot_create_lock); [ 3437.469030] lock(&type->s_umount_key#48); [ 3437.469291] rlock(sb_writers#10); [ 3437.469434] *** DEADLOCK *** [ 3437.469 ---truncated--- |
| CVE-2024-26657 | In the Linux kernel, the following vulnerability has been resolved: drm/sched: fix null-ptr-deref in init entity The bug can be triggered by sending an amdgpu_cs_wait_ioctl to the AMDGPU DRM driver on any ASICs with valid context. The bug was reported by Joonkyo Jung <[email protected]>. For example the following code: static void Syzkaller2(int fd) { union drm_amdgpu_ctx arg1; union drm_amdgpu_wait_cs arg2; arg1.in.op = AMDGPU_CTX_OP_ALLOC_CTX; ret = drmIoctl(fd, 0x140106442 /* amdgpu_ctx_ioctl */, &arg1); arg2.in.handle = 0x0; arg2.in.timeout = 0x2000000000000; arg2.in.ip_type = AMD_IP_VPE /* 0x9 */; arg2->in.ip_instance = 0x0; arg2.in.ring = 0x0; arg2.in.ctx_id = arg1.out.alloc.ctx_id; drmIoctl(fd, 0xc0206449 /* AMDGPU_WAIT_CS * /, &arg2); } The ioctl AMDGPU_WAIT_CS without previously submitted job could be assumed that the error should be returned, but the following commit 1decbf6bb0b4dc56c9da6c5e57b994ebfc2be3aa modified the logic and allowed to have sched_rq equal to NULL. As a result when there is no job the ioctl AMDGPU_WAIT_CS returns success. The change fixes null-ptr-deref in init entity and the stack below demonstrates the error condition: [ +0.000007] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ +0.007086] #PF: supervisor read access in kernel mode [ +0.005234] #PF: error_code(0x0000) - not-present page [ +0.005232] PGD 0 P4D 0 [ +0.002501] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI [ +0.005034] CPU: 10 PID: 9229 Comm: amd_basic Tainted: G B W L 6.7.0+ #4 [ +0.007797] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.009798] RIP: 0010:drm_sched_entity_init+0x2d3/0x420 [gpu_sched] [ +0.006426] Code: 80 00 00 00 00 00 00 00 e8 1a 81 82 e0 49 89 9c 24 c0 00 00 00 4c 89 ef e8 4a 80 82 e0 49 8b 5d 00 48 8d 7b 28 e8 3d 80 82 e0 <48> 83 7b 28 00 0f 84 28 01 00 00 4d 8d ac 24 98 00 00 00 49 8d 5c [ +0.019094] RSP: 0018:ffffc90014c1fa40 EFLAGS: 00010282 [ +0.005237] RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffffffff8113f3fa [ +0.007326] RDX: fffffbfff0a7889d RSI: 0000000000000008 RDI: ffffffff853c44e0 [ +0.007264] RBP: ffffc90014c1fa80 R08: 0000000000000001 R09: fffffbfff0a7889c [ +0.007266] R10: ffffffff853c44e7 R11: 0000000000000001 R12: ffff8881a719b010 [ +0.007263] R13: ffff88810d412748 R14: 0000000000000002 R15: 0000000000000000 [ +0.007264] FS: 00007ffff7045540(0000) GS:ffff8883cc900000(0000) knlGS:0000000000000000 [ +0.008236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.005851] CR2: 0000000000000028 CR3: 000000011912e000 CR4: 0000000000350ef0 [ +0.007175] Call Trace: [ +0.002561] <TASK> [ +0.002141] ? show_regs+0x6a/0x80 [ +0.003473] ? __die+0x25/0x70 [ +0.003124] ? page_fault_oops+0x214/0x720 [ +0.004179] ? preempt_count_sub+0x18/0xc0 [ +0.004093] ? __pfx_page_fault_oops+0x10/0x10 [ +0.004590] ? srso_return_thunk+0x5/0x5f [ +0.004000] ? vprintk_default+0x1d/0x30 [ +0.004063] ? srso_return_thunk+0x5/0x5f [ +0.004087] ? vprintk+0x5c/0x90 [ +0.003296] ? drm_sched_entity_init+0x2d3/0x420 [gpu_sched] [ +0.005807] ? srso_return_thunk+0x5/0x5f [ +0.004090] ? _printk+0xb3/0xe0 [ +0.003293] ? __pfx__printk+0x10/0x10 [ +0.003735] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ +0.005482] ? do_user_addr_fault+0x345/0x770 [ +0.004361] ? exc_page_fault+0x64/0xf0 [ +0.003972] ? asm_exc_page_fault+0x27/0x30 [ +0.004271] ? add_taint+0x2a/0xa0 [ +0.003476] ? drm_sched_entity_init+0x2d3/0x420 [gpu_sched] [ +0.005812] amdgpu_ctx_get_entity+0x3f9/0x770 [amdgpu] [ +0.009530] ? finish_task_switch.isra.0+0x129/0x470 [ +0.005068] ? __pfx_amdgpu_ctx_get_entity+0x10/0x10 [amdgpu] [ +0.010063] ? __kasan_check_write+0x14/0x20 [ +0.004356] ? srso_return_thunk+0x5/0x5f [ +0.004001] ? mutex_unlock+0x81/0xd0 [ +0.003802] ? srso_return_thunk+0x5/0x5f [ +0.004096] amdgpu_cs_wait_ioctl+0xf6/0x270 [amdgpu] [ +0.009355] ? __pfx_ ---truncated--- |
| CVE-2024-26656 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix use-after-free bug The bug can be triggered by sending a single amdgpu_gem_userptr_ioctl to the AMDGPU DRM driver on any ASICs with an invalid address and size. The bug was reported by Joonkyo Jung <[email protected]>. For example the following code: static void Syzkaller1(int fd) { struct drm_amdgpu_gem_userptr arg; int ret; arg.addr = 0xffffffffffff0000; arg.size = 0x80000000; /*2 Gb*/ arg.flags = 0x7; ret = drmIoctl(fd, 0xc1186451/*amdgpu_gem_userptr_ioctl*/, &arg); } Due to the address and size are not valid there is a failure in amdgpu_hmm_register->mmu_interval_notifier_insert->__mmu_interval_notifier_insert-> check_shl_overflow, but we even the amdgpu_hmm_register failure we still call amdgpu_hmm_unregister into amdgpu_gem_object_free which causes access to a bad address. The following stack is below when the issue is reproduced when Kazan is enabled: [ +0.000014] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000009] RIP: 0010:mmu_interval_notifier_remove+0x327/0x340 [ +0.000017] Code: ff ff 49 89 44 24 08 48 b8 00 01 00 00 00 00 ad de 4c 89 f7 49 89 47 40 48 83 c0 22 49 89 47 48 e8 ce d1 2d 01 e9 32 ff ff ff <0f> 0b e9 16 ff ff ff 4c 89 ef e8 fa 14 b3 ff e9 36 ff ff ff e8 80 [ +0.000014] RSP: 0018:ffffc90002657988 EFLAGS: 00010246 [ +0.000013] RAX: 0000000000000000 RBX: 1ffff920004caf35 RCX: ffffffff8160565b [ +0.000011] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffff8881a9f78260 [ +0.000010] RBP: ffffc90002657a70 R08: 0000000000000001 R09: fffff520004caf25 [ +0.000010] R10: 0000000000000003 R11: ffffffff8161d1d6 R12: ffff88810e988c00 [ +0.000010] R13: ffff888126fb5a00 R14: ffff88810e988c0c R15: ffff8881a9f78260 [ +0.000011] FS: 00007ff9ec848540(0000) GS:ffff8883cc880000(0000) knlGS:0000000000000000 [ +0.000012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000010] CR2: 000055b3f7e14328 CR3: 00000001b5770000 CR4: 0000000000350ef0 [ +0.000010] Call Trace: [ +0.000006] <TASK> [ +0.000007] ? show_regs+0x6a/0x80 [ +0.000018] ? __warn+0xa5/0x1b0 [ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340 [ +0.000018] ? report_bug+0x24a/0x290 [ +0.000022] ? handle_bug+0x46/0x90 [ +0.000015] ? exc_invalid_op+0x19/0x50 [ +0.000016] ? asm_exc_invalid_op+0x1b/0x20 [ +0.000017] ? kasan_save_stack+0x26/0x50 [ +0.000017] ? mmu_interval_notifier_remove+0x23b/0x340 [ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340 [ +0.000019] ? mmu_interval_notifier_remove+0x23b/0x340 [ +0.000020] ? __pfx_mmu_interval_notifier_remove+0x10/0x10 [ +0.000017] ? kasan_save_alloc_info+0x1e/0x30 [ +0.000018] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? __kasan_kmalloc+0xb1/0xc0 [ +0.000018] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? __kasan_check_read+0x11/0x20 [ +0.000020] amdgpu_hmm_unregister+0x34/0x50 [amdgpu] [ +0.004695] amdgpu_gem_object_free+0x66/0xa0 [amdgpu] [ +0.004534] ? __pfx_amdgpu_gem_object_free+0x10/0x10 [amdgpu] [ +0.004291] ? do_syscall_64+0x5f/0xe0 [ +0.000023] ? srso_return_thunk+0x5/0x5f [ +0.000017] drm_gem_object_free+0x3b/0x50 [drm] [ +0.000489] amdgpu_gem_userptr_ioctl+0x306/0x500 [amdgpu] [ +0.004295] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu] [ +0.004270] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? __this_cpu_preempt_check+0x13/0x20 [ +0.000015] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ +0.000020] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ +0.000022] ? drm_ioctl_kernel+0x17b/0x1f0 [drm] [ +0.000496] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu] [ +0.004272] ? drm_ioctl_kernel+0x190/0x1f0 [drm] [ +0.000492] drm_ioctl_kernel+0x140/0x1f0 [drm] [ +0.000497] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu] [ +0.004297] ? __pfx_drm_ioctl_kernel+0x10/0x10 [d ---truncated--- |
| CVE-2024-26655 | In the Linux kernel, the following vulnerability has been resolved: Fix memory leak in posix_clock_open() If the clk ops.open() function returns an error, we don't release the pccontext we allocated for this clock. Re-organize the code slightly to make it all more obvious. |
| CVE-2024-26654 | In the Linux kernel, the following vulnerability has been resolved: ALSA: sh: aica: reorder cleanup operations to avoid UAF bugs The dreamcastcard->timer could schedule the spu_dma_work and the spu_dma_work could also arm the dreamcastcard->timer. When the snd_pcm_substream is closing, the aica_channel will be deallocated. But it could still be dereferenced in the worker thread. The reason is that del_timer() will return directly regardless of whether the timer handler is running or not and the worker could be rescheduled in the timer handler. As a result, the UAF bug will happen. The racy situation is shown below: (Thread 1) | (Thread 2) snd_aicapcm_pcm_close() | ... | run_spu_dma() //worker | mod_timer() flush_work() | del_timer() | aica_period_elapsed() //timer kfree(dreamcastcard->channel) | schedule_work() | run_spu_dma() //worker ... | dreamcastcard->channel-> //USE In order to mitigate this bug and other possible corner cases, call mod_timer() conditionally in run_spu_dma(), then implement PCM sync_stop op to cancel both the timer and worker. The sync_stop op will be called from PCM core appropriately when needed. |
| CVE-2024-26653 | In the Linux kernel, the following vulnerability has been resolved: usb: misc: ljca: Fix double free in error handling path When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function ljca_auxdev_release calls kfree(auxdev->dev.platform_data) to free the parameter data of the function ljca_new_client_device. The callers of ljca_new_client_device shouldn't call kfree() again in the error handling path to free the platform data. Fix this by cleaning up the redundant kfree() in all callers and adding kfree() the passed in platform_data on errors which happen before auxiliary_device_init() succeeds . |
| CVE-2024-26652 | In the Linux kernel, the following vulnerability has been resolved: net: pds_core: Fix possible double free in error handling path When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), Callback function pdsc_auxbus_dev_release calls kfree(padev) to free memory. We shouldn't call kfree(padev) again in the error handling path. Fix this by cleaning up the redundant kfree() and putting the error handling back to where the errors happened. |
| CVE-2024-26651 | In the Linux kernel, the following vulnerability has been resolved: sr9800: Add check for usbnet_get_endpoints Add check for usbnet_get_endpoints() and return the error if it fails in order to transfer the error. |
| CVE-2024-26649 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix the null pointer when load rlc firmware If the RLC firmware is invalid because of wrong header size, the pointer to the rlc firmware is released in function amdgpu_ucode_request. There will be a null pointer error in subsequent use. So skip validation to fix it. |
| CVE-2024-26648 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix variable deferencing before NULL check in edp_setup_replay() In edp_setup_replay(), 'struct dc *dc' & 'struct dmub_replay *replay' was dereferenced before the pointer 'link' & 'replay' NULL check. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c:947 edp_setup_replay() warn: variable dereferenced before check 'link' (see line 933) |
| CVE-2024-26647 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix late derefrence 'dsc' check in 'link_set_dsc_pps_packet()' In link_set_dsc_pps_packet(), 'struct display_stream_compressor *dsc' was dereferenced in a DC_LOGGER_INIT(dsc->ctx->logger); before the 'dsc' NULL pointer check. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:905 link_set_dsc_pps_packet() warn: variable dereferenced before check 'dsc' (see line 903) |
| CVE-2024-26646 | In the Linux kernel, the following vulnerability has been resolved: thermal: intel: hfi: Add syscore callbacks for system-wide PM The kernel allocates a memory buffer and provides its location to the hardware, which uses it to update the HFI table. This allocation occurs during boot and remains constant throughout runtime. When resuming from hibernation, the restore kernel allocates a second memory buffer and reprograms the HFI hardware with the new location as part of a normal boot. The location of the second memory buffer may differ from the one allocated by the image kernel. When the restore kernel transfers control to the image kernel, its HFI buffer becomes invalid, potentially leading to memory corruption if the hardware writes to it (the hardware continues to use the buffer from the restore kernel). It is also possible that the hardware "forgets" the address of the memory buffer when resuming from "deep" suspend. Memory corruption may also occur in such a scenario. To prevent the described memory corruption, disable HFI when preparing to suspend or hibernate. Enable it when resuming. Add syscore callbacks to handle the package of the boot CPU (packages of non-boot CPUs are handled via CPU offline). Syscore ops always run on the boot CPU. Additionally, HFI only needs to be disabled during "deep" suspend and hibernation. Syscore ops only run in these cases. [ rjw: Comment adjustment, subject and changelog edits ] |
| CVE-2024-26645 | In the Linux kernel, the following vulnerability has been resolved: tracing: Ensure visibility when inserting an element into tracing_map Running the following two commands in parallel on a multi-processor AArch64 machine can sporadically produce an unexpected warning about duplicate histogram entries: $ while true; do echo hist:key=id.syscall:val=hitcount > \ /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist sleep 0.001 done $ stress-ng --sysbadaddr $(nproc) The warning looks as follows: [ 2911.172474] ------------[ cut here ]------------ [ 2911.173111] Duplicates detected: 1 [ 2911.173574] WARNING: CPU: 2 PID: 12247 at kernel/trace/tracing_map.c:983 tracing_map_sort_entries+0x3e0/0x408 [ 2911.174702] Modules linked in: iscsi_ibft(E) iscsi_boot_sysfs(E) rfkill(E) af_packet(E) nls_iso8859_1(E) nls_cp437(E) vfat(E) fat(E) ena(E) tiny_power_button(E) qemu_fw_cfg(E) button(E) fuse(E) efi_pstore(E) ip_tables(E) x_tables(E) xfs(E) libcrc32c(E) aes_ce_blk(E) aes_ce_cipher(E) crct10dif_ce(E) polyval_ce(E) polyval_generic(E) ghash_ce(E) gf128mul(E) sm4_ce_gcm(E) sm4_ce_ccm(E) sm4_ce(E) sm4_ce_cipher(E) sm4(E) sm3_ce(E) sm3(E) sha3_ce(E) sha512_ce(E) sha512_arm64(E) sha2_ce(E) sha256_arm64(E) nvme(E) sha1_ce(E) nvme_core(E) nvme_auth(E) t10_pi(E) sg(E) scsi_mod(E) scsi_common(E) efivarfs(E) [ 2911.174738] Unloaded tainted modules: cppc_cpufreq(E):1 [ 2911.180985] CPU: 2 PID: 12247 Comm: cat Kdump: loaded Tainted: G E 6.7.0-default #2 1b58bbb22c97e4399dc09f92d309344f69c44a01 [ 2911.182398] Hardware name: Amazon EC2 c7g.8xlarge/, BIOS 1.0 11/1/2018 [ 2911.183208] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2911.184038] pc : tracing_map_sort_entries+0x3e0/0x408 [ 2911.184667] lr : tracing_map_sort_entries+0x3e0/0x408 [ 2911.185310] sp : ffff8000a1513900 [ 2911.185750] x29: ffff8000a1513900 x28: ffff0003f272fe80 x27: 0000000000000001 [ 2911.186600] x26: ffff0003f272fe80 x25: 0000000000000030 x24: 0000000000000008 [ 2911.187458] x23: ffff0003c5788000 x22: ffff0003c16710c8 x21: ffff80008017f180 [ 2911.188310] x20: ffff80008017f000 x19: ffff80008017f180 x18: ffffffffffffffff [ 2911.189160] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000a15134b8 [ 2911.190015] x14: 0000000000000000 x13: 205d373432323154 x12: 5b5d313131333731 [ 2911.190844] x11: 00000000fffeffff x10: 00000000fffeffff x9 : ffffd1b78274a13c [ 2911.191716] x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 000000000057ffa8 [ 2911.192554] x5 : ffff0012f6c24ec0 x4 : 0000000000000000 x3 : ffff2e5b72b5d000 [ 2911.193404] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0003ff254480 [ 2911.194259] Call trace: [ 2911.194626] tracing_map_sort_entries+0x3e0/0x408 [ 2911.195220] hist_show+0x124/0x800 [ 2911.195692] seq_read_iter+0x1d4/0x4e8 [ 2911.196193] seq_read+0xe8/0x138 [ 2911.196638] vfs_read+0xc8/0x300 [ 2911.197078] ksys_read+0x70/0x108 [ 2911.197534] __arm64_sys_read+0x24/0x38 [ 2911.198046] invoke_syscall+0x78/0x108 [ 2911.198553] el0_svc_common.constprop.0+0xd0/0xf8 [ 2911.199157] do_el0_svc+0x28/0x40 [ 2911.199613] el0_svc+0x40/0x178 [ 2911.200048] el0t_64_sync_handler+0x13c/0x158 [ 2911.200621] el0t_64_sync+0x1a8/0x1b0 [ 2911.201115] ---[ end trace 0000000000000000 ]--- The problem appears to be caused by CPU reordering of writes issued from __tracing_map_insert(). The check for the presence of an element with a given key in this function is: val = READ_ONCE(entry->val); if (val && keys_match(key, val->key, map->key_size)) ... The write of a new entry is: elt = get_free_elt(map); memcpy(elt->key, key, map->key_size); entry->val = elt; The "memcpy(elt->key, key, map->key_size);" and "entry->val = elt;" stores may become visible in the reversed order on another CPU. This second CPU might then incorrectly determine that a new key doesn't match an already present val->key and subse ---truncated--- |
| CVE-2024-26644 | In the Linux kernel, the following vulnerability has been resolved: btrfs: don't abort filesystem when attempting to snapshot deleted subvolume If the source file descriptor to the snapshot ioctl refers to a deleted subvolume, we get the following abort: BTRFS: Transaction aborted (error -2) WARNING: CPU: 0 PID: 833 at fs/btrfs/transaction.c:1875 create_pending_snapshot+0x1040/0x1190 [btrfs] Modules linked in: pata_acpi btrfs ata_piix libata scsi_mod virtio_net blake2b_generic xor net_failover virtio_rng failover scsi_common rng_core raid6_pq libcrc32c CPU: 0 PID: 833 Comm: t_snapshot_dele Not tainted 6.7.0-rc6 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:create_pending_snapshot+0x1040/0x1190 [btrfs] RSP: 0018:ffffa09c01337af8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9982053e7c78 RCX: 0000000000000027 RDX: ffff99827dc20848 RSI: 0000000000000001 RDI: ffff99827dc20840 RBP: ffffa09c01337c00 R08: 0000000000000000 R09: ffffa09c01337998 R10: 0000000000000003 R11: ffffffffb96da248 R12: fffffffffffffffe R13: ffff99820535bb28 R14: ffff99820b7bd000 R15: ffff99820381ea80 FS: 00007fe20aadabc0(0000) GS:ffff99827dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559a120b502f CR3: 00000000055b6000 CR4: 00000000000006f0 Call Trace: <TASK> ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? __warn+0x81/0x130 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? report_bug+0x171/0x1a0 ? handle_bug+0x3a/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? create_pending_snapshot+0x1040/0x1190 [btrfs] create_pending_snapshots+0x92/0xc0 [btrfs] btrfs_commit_transaction+0x66b/0xf40 [btrfs] btrfs_mksubvol+0x301/0x4d0 [btrfs] btrfs_mksnapshot+0x80/0xb0 [btrfs] __btrfs_ioctl_snap_create+0x1c2/0x1d0 [btrfs] btrfs_ioctl_snap_create_v2+0xc4/0x150 [btrfs] btrfs_ioctl+0x8a6/0x2650 [btrfs] ? kmem_cache_free+0x22/0x340 ? do_sys_openat2+0x97/0xe0 __x64_sys_ioctl+0x97/0xd0 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7fe20abe83af RSP: 002b:00007ffe6eff1360 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fe20abe83af RDX: 00007ffe6eff23c0 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 00007fe20ad16cd0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe6eff13c0 R14: 00007fe20ad45000 R15: 0000559a120b6d58 </TASK> ---[ end trace 0000000000000000 ]--- BTRFS: error (device vdc: state A) in create_pending_snapshot:1875: errno=-2 No such entry BTRFS info (device vdc: state EA): forced readonly BTRFS warning (device vdc: state EA): Skipping commit of aborted transaction. BTRFS: error (device vdc: state EA) in cleanup_transaction:2055: errno=-2 No such entry This happens because create_pending_snapshot() initializes the new root item as a copy of the source root item. This includes the refs field, which is 0 for a deleted subvolume. The call to btrfs_insert_root() therefore inserts a root with refs == 0. btrfs_get_new_fs_root() then finds the root and returns -ENOENT if refs == 0, which causes create_pending_snapshot() to abort. Fix it by checking the source root's refs before attempting the snapshot, but after locking subvol_sem to avoid racing with deletion. |
| CVE-2024-26643 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout While the rhashtable set gc runs asynchronously, a race allows it to collect elements from anonymous sets with timeouts while it is being released from the commit path. Mingi Cho originally reported this issue in a different path in 6.1.x with a pipapo set with low timeouts which is not possible upstream since 7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set element timeout"). Fix this by setting on the dead flag for anonymous sets to skip async gc in this case. According to 08e4c8c5919f ("netfilter: nf_tables: mark newset as dead on transaction abort"), Florian plans to accelerate abort path by releasing objects via workqueue, therefore, this sets on the dead flag for abort path too. |
| CVE-2024-26642 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: disallow anonymous set with timeout flag Anonymous sets are never used with timeout from userspace, reject this. Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work. |
| CVE-2024-26641 | In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv() syzbot found __ip6_tnl_rcv() could access unitiliazed data [1]. Call pskb_inet_may_pull() to fix this, and initialize ipv6h variable after this call as it can change skb->head. [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x178/0x1b0 net/ipv6/ip6_tunnel.c:727 __ip6_tnl_rcv+0xd4e/0x1590 net/ipv6/ip6_tunnel.c:845 ip6_tnl_rcv+0xce/0x100 net/ipv6/ip6_tunnel.c:888 gre_rcv+0x143f/0x1870 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5532 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646 netif_receive_skb_internal net/core/dev.c:5732 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5791 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787 tun_alloc_skb drivers/net/tun.c:1531 [inline] tun_get_user+0x1e8a/0x66d0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 5034 Comm: syz-executor331 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 |
| CVE-2024-26640 | In the Linux kernel, the following vulnerability has been resolved: tcp: add sanity checks to rx zerocopy TCP rx zerocopy intent is to map pages initially allocated from NIC drivers, not pages owned by a fs. This patch adds to can_map_frag() these additional checks: - Page must not be a compound one. - page->mapping must be NULL. This fixes the panic reported by ZhangPeng. syzbot was able to loopback packets built with sendfile(), mapping pages owned by an ext4 file to TCP rx zerocopy. r3 = socket$inet_tcp(0x2, 0x1, 0x0) mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0) r4 = socket$inet_tcp(0x2, 0x1, 0x0) bind$inet(r4, &(0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10) connect$inet(r4, &(0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10) r5 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00', 0x181e42, 0x0) fallocate(r5, 0x0, 0x0, 0x85b8) sendfile(r4, r5, 0x0, 0x8ba0) getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23, &(0x7f00000001c0)={&(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, &(0x7f0000000440)=0x40) r6 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00', 0x181e42, 0x0) |
| CVE-2024-26638 | In the Linux kernel, the following vulnerability has been resolved: nbd: always initialize struct msghdr completely syzbot complains that msg->msg_get_inq value can be uninitialized [1] struct msghdr got many new fields recently, we should always make sure their values is zero by default. [1] BUG: KMSAN: uninit-value in tcp_recvmsg+0x686/0xac0 net/ipv4/tcp.c:2571 tcp_recvmsg+0x686/0xac0 net/ipv4/tcp.c:2571 inet_recvmsg+0x131/0x580 net/ipv4/af_inet.c:879 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0x12b/0x1e0 net/socket.c:1066 __sock_xmit+0x236/0x5c0 drivers/block/nbd.c:538 nbd_read_reply drivers/block/nbd.c:732 [inline] recv_work+0x262/0x3100 drivers/block/nbd.c:863 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x104e/0x1e70 kernel/workqueue.c:2700 worker_thread+0xf45/0x1490 kernel/workqueue.c:2781 kthread+0x3ed/0x540 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 Local variable msg created at: __sock_xmit+0x4c/0x5c0 drivers/block/nbd.c:513 nbd_read_reply drivers/block/nbd.c:732 [inline] recv_work+0x262/0x3100 drivers/block/nbd.c:863 CPU: 1 PID: 7465 Comm: kworker/u5:1 Not tainted 6.7.0-rc7-syzkaller-00041-gf016f7547aee #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Workqueue: nbd5-recv recv_work |
| CVE-2024-26637 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: rely on mac80211 debugfs handling for vif mac80211 started to delete debugfs entries in certain cases, causing a ath11k to crash when it tried to delete the entries later. Fix this by relying on mac80211 to delete the entries when appropriate and adding them from the vif_add_debugfs handler. |
| CVE-2024-26636 | In the Linux kernel, the following vulnerability has been resolved: llc: make llc_ui_sendmsg() more robust against bonding changes syzbot was able to trick llc_ui_sendmsg(), allocating an skb with no headroom, but subsequently trying to push 14 bytes of Ethernet header [1] Like some others, llc_ui_sendmsg() releases the socket lock before calling sock_alloc_send_skb(). Then it acquires it again, but does not redo all the sanity checks that were performed. This fix: - Uses LL_RESERVED_SPACE() to reserve space. - Check all conditions again after socket lock is held again. - Do not account Ethernet header for mtu limitation. [1] skbuff: skb_under_panic: text:ffff800088baa334 len:1514 put:14 head:ffff0000c9c37000 data:ffff0000c9c36ff2 tail:0x5dc end:0x6c0 dev:bond0 kernel BUG at net/core/skbuff.c:193 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6875 Comm: syz-executor.0 Not tainted 6.7.0-rc8-syzkaller-00101-g0802e17d9aca-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:189 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 lr : skb_panic net/core/skbuff.c:189 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 sp : ffff800096f97000 x29: ffff800096f97010 x28: ffff80008cc8d668 x27: dfff800000000000 x26: ffff0000cb970c90 x25: 00000000000005dc x24: ffff0000c9c36ff2 x23: ffff0000c9c37000 x22: 00000000000005ea x21: 00000000000006c0 x20: 000000000000000e x19: ffff800088baa334 x18: 1fffe000368261ce x17: ffff80008e4ed000 x16: ffff80008a8310f8 x15: 0000000000000001 x14: 1ffff00012df2d58 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000ff0100 x9 : e28a51f1087e8400 x8 : e28a51f1087e8400 x7 : ffff80008028f8d0 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff800082b78714 x2 : 0000000000000001 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic net/core/skbuff.c:189 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 skb_push+0xf0/0x108 net/core/skbuff.c:2451 eth_header+0x44/0x1f8 net/ethernet/eth.c:83 dev_hard_header include/linux/netdevice.h:3188 [inline] llc_mac_hdr_init+0x110/0x17c net/llc/llc_output.c:33 llc_sap_action_send_xid_c+0x170/0x344 net/llc/llc_s_ac.c:85 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x1ec/0x774 net/llc/llc_sap.c:209 llc_build_and_send_xid_pkt+0x12c/0x1c0 net/llc/llc_sap.c:270 llc_ui_sendmsg+0x7bc/0xb1c net/llc/af_llc.c:997 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x194/0x274 net/socket.c:767 splice_to_socket+0x7cc/0xd58 fs/splice.c:881 do_splice_from fs/splice.c:933 [inline] direct_splice_actor+0xe4/0x1c0 fs/splice.c:1142 splice_direct_to_actor+0x2a0/0x7e4 fs/splice.c:1088 do_splice_direct+0x20c/0x348 fs/splice.c:1194 do_sendfile+0x4bc/0xc70 fs/read_write.c:1254 __do_sys_sendfile64 fs/read_write.c:1322 [inline] __se_sys_sendfile64 fs/read_write.c:1308 [inline] __arm64_sys_sendfile64+0x160/0x3b4 fs/read_write.c:1308 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x54/0x158 arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:595 Code: aa1803e6 aa1903e7 a90023f5 94792f6a (d4210000) |
| CVE-2024-26635 | In the Linux kernel, the following vulnerability has been resolved: llc: Drop support for ETH_P_TR_802_2. syzbot reported an uninit-value bug below. [0] llc supports ETH_P_802_2 (0x0004) and used to support ETH_P_TR_802_2 (0x0011), and syzbot abused the latter to trigger the bug. write$tun(r0, &(0x7f0000000040)={@val={0x0, 0x11}, @val, @mpls={[], @llc={@snap={0xaa, 0x1, ')', "90e5dd"}}}}, 0x16) llc_conn_handler() initialises local variables {saddr,daddr}.mac based on skb in llc_pdu_decode_sa()/llc_pdu_decode_da() and passes them to __llc_lookup(). However, the initialisation is done only when skb->protocol is htons(ETH_P_802_2), otherwise, __llc_lookup_established() and __llc_lookup_listener() will read garbage. The missing initialisation existed prior to commit 211ed865108e ("net: delete all instances of special processing for token ring"). It removed the part to kick out the token ring stuff but forgot to close the door allowing ETH_P_TR_802_2 packets to sneak into llc_rcv(). Let's remove llc_tr_packet_type and complete the deprecation. [0]: BUG: KMSAN: uninit-value in __llc_lookup_established+0xe9d/0xf90 __llc_lookup_established+0xe9d/0xf90 __llc_lookup net/llc/llc_conn.c:611 [inline] llc_conn_handler+0x4bd/0x1360 net/llc/llc_conn.c:791 llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206 __netif_receive_skb_one_core net/core/dev.c:5527 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5641 netif_receive_skb_internal net/core/dev.c:5727 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5786 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2020 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x1490 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Local variable daddr created at: llc_conn_handler+0x53/0x1360 net/llc/llc_conn.c:783 llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206 CPU: 1 PID: 5004 Comm: syz-executor994 Not tainted 6.6.0-syzkaller-14500-g1c41041124bd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 |
| CVE-2024-26634 | In the Linux kernel, the following vulnerability has been resolved: net: fix removing a namespace with conflicting altnames Mark reports a BUG() when a net namespace is removed. kernel BUG at net/core/dev.c:11520! Physical interfaces moved outside of init_net get "refunded" to init_net when that namespace disappears. The main interface name may get overwritten in the process if it would have conflicted. We need to also discard all conflicting altnames. Recent fixes addressed ensuring that altnames get moved with the main interface, which surfaced this problem. |
| CVE-2024-26633 | In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: fix NEXTHDR_FRAGMENT handling in ip6_tnl_parse_tlv_enc_lim() syzbot pointed out [1] that NEXTHDR_FRAGMENT handling is broken. Reading frag_off can only be done if we pulled enough bytes to skb->head. Currently we might access garbage. [1] BUG: KMSAN: uninit-value in ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0 ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0 ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline] ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137 ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243 dst_output include/net/dst.h:451 [inline] ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155 ip6_send_skb net/ipv6/ip6_output.c:1952 [inline] ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972 rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582 rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920 inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] __kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517 __do_kmalloc_node mm/slab_common.c:1006 [inline] __kmalloc_node_track_caller+0x118/0x3c0 mm/slab_common.c:1027 kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582 pskb_expand_head+0x226/0x1a00 net/core/skbuff.c:2098 __pskb_pull_tail+0x13b/0x2310 net/core/skbuff.c:2655 pskb_may_pull_reason include/linux/skbuff.h:2673 [inline] pskb_may_pull include/linux/skbuff.h:2681 [inline] ip6_tnl_parse_tlv_enc_lim+0x901/0xbb0 net/ipv6/ip6_tunnel.c:408 ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline] ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137 ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243 dst_output include/net/dst.h:451 [inline] ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155 ip6_send_skb net/ipv6/ip6_output.c:1952 [inline] ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972 rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582 rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920 inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendms ---truncated--- |
| CVE-2024-26632 | In the Linux kernel, the following vulnerability has been resolved: block: Fix iterating over an empty bio with bio_for_each_folio_all If the bio contains no data, bio_first_folio() calls page_folio() on a NULL pointer and oopses. Move the test that we've reached the end of the bio from bio_next_folio() to bio_first_folio(). [axboe: add unlikely() to error case] |
| CVE-2024-26631 | In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work idev->mc_ifc_count can be written over without proper locking. Originally found by syzbot [1], fix this issue by encapsulating calls to mld_ifc_stop_work() (and mld_gq_stop_work() for good measure) with mutex_lock() and mutex_unlock() accordingly as these functions should only be called with mc_lock per their declarations. [1] BUG: KCSAN: data-race in ipv6_mc_down / mld_ifc_work write to 0xffff88813a80c832 of 1 bytes by task 3771 on cpu 0: mld_ifc_stop_work net/ipv6/mcast.c:1080 [inline] ipv6_mc_down+0x10a/0x280 net/ipv6/mcast.c:2725 addrconf_ifdown+0xe32/0xf10 net/ipv6/addrconf.c:3949 addrconf_notify+0x310/0x980 notifier_call_chain kernel/notifier.c:93 [inline] raw_notifier_call_chain+0x6b/0x1c0 kernel/notifier.c:461 __dev_notify_flags+0x205/0x3d0 dev_change_flags+0xab/0xd0 net/core/dev.c:8685 do_setlink+0x9f6/0x2430 net/core/rtnetlink.c:2916 rtnl_group_changelink net/core/rtnetlink.c:3458 [inline] __rtnl_newlink net/core/rtnetlink.c:3717 [inline] rtnl_newlink+0xbb3/0x1670 net/core/rtnetlink.c:3754 rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6558 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2545 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6576 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0x589/0x650 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x66e/0x770 net/netlink/af_netlink.c:1910 ... write to 0xffff88813a80c832 of 1 bytes by task 22 on cpu 1: mld_ifc_work+0x54c/0x7b0 net/ipv6/mcast.c:2653 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2700 worker_thread+0x525/0x730 kernel/workqueue.c:2781 ... |
| CVE-2024-26630 | In the Linux kernel, the following vulnerability has been resolved: mm: cachestat: fix folio read-after-free in cache walk In cachestat, we access the folio from the page cache's xarray to compute its page offset, and check for its dirty and writeback flags. However, we do not hold a reference to the folio before performing these actions, which means the folio can concurrently be released and reused as another folio/page/slab. Get around this altogether by just using xarray's existing machinery for the folio page offsets and dirty/writeback states. This changes behavior for tmpfs files to now always report zeroes in their dirty and writeback counters. This is okay as tmpfs doesn't follow conventional writeback cache behavior: its pages get "cleaned" during swapout, after which they're no longer resident etc. |
| CVE-2024-26629 | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix RELEASE_LOCKOWNER The test on so_count in nfsd4_release_lockowner() is nonsense and harmful. Revert to using check_for_locks(), changing that to not sleep. First: harmful. As is documented in the kdoc comment for nfsd4_release_lockowner(), the test on so_count can transiently return a false positive resulting in a return of NFS4ERR_LOCKS_HELD when in fact no locks are held. This is clearly a protocol violation and with the Linux NFS client it can cause incorrect behaviour. If RELEASE_LOCKOWNER is sent while some other thread is still processing a LOCK request which failed because, at the time that request was received, the given owner held a conflicting lock, then the nfsd thread processing that LOCK request can hold a reference (conflock) to the lock owner that causes nfsd4_release_lockowner() to return an incorrect error. The Linux NFS client ignores that NFS4ERR_LOCKS_HELD error because it never sends NFS4_RELEASE_LOCKOWNER without first releasing any locks, so it knows that the error is impossible. It assumes the lock owner was in fact released so it feels free to use the same lock owner identifier in some later locking request. When it does reuse a lock owner identifier for which a previous RELEASE failed, it will naturally use a lock_seqid of zero. However the server, which didn't release the lock owner, will expect a larger lock_seqid and so will respond with NFS4ERR_BAD_SEQID. So clearly it is harmful to allow a false positive, which testing so_count allows. The test is nonsense because ... well... it doesn't mean anything. so_count is the sum of three different counts. 1/ the set of states listed on so_stateids 2/ the set of active vfs locks owned by any of those states 3/ various transient counts such as for conflicting locks. When it is tested against '2' it is clear that one of these is the transient reference obtained by find_lockowner_str_locked(). It is not clear what the other one is expected to be. In practice, the count is often 2 because there is precisely one state on so_stateids. If there were more, this would fail. In my testing I see two circumstances when RELEASE_LOCKOWNER is called. In one case, CLOSE is called before RELEASE_LOCKOWNER. That results in all the lock states being removed, and so the lockowner being discarded (it is removed when there are no more references which usually happens when the lock state is discarded). When nfsd4_release_lockowner() finds that the lock owner doesn't exist, it returns success. The other case shows an so_count of '2' and precisely one state listed in so_stateid. It appears that the Linux client uses a separate lock owner for each file resulting in one lock state per lock owner, so this test on '2' is safe. For another client it might not be safe. So this patch changes check_for_locks() to use the (newish) find_any_file_locked() so that it doesn't take a reference on the nfs4_file and so never calls nfsd_file_put(), and so never sleeps. With this check is it safe to restore the use of check_for_locks() rather than testing so_count against the mysterious '2'. |
| CVE-2024-26627 | In the Linux kernel, the following vulnerability has been resolved: scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler Inside scsi_eh_wakeup(), scsi_host_busy() is called & checked with host lock every time for deciding if error handler kthread needs to be waken up. This can be too heavy in case of recovery, such as: - N hardware queues - queue depth is M for each hardware queue - each scsi_host_busy() iterates over (N * M) tag/requests If recovery is triggered in case that all requests are in-flight, each scsi_eh_wakeup() is strictly serialized, when scsi_eh_wakeup() is called for the last in-flight request, scsi_host_busy() has been run for (N * M - 1) times, and request has been iterated for (N*M - 1) * (N * M) times. If both N and M are big enough, hard lockup can be triggered on acquiring host lock, and it is observed on mpi3mr(128 hw queues, queue depth 8169). Fix the issue by calling scsi_host_busy() outside the host lock. We don't need the host lock for getting busy count because host the lock never covers that. [mkp: Drop unnecessary 'busy' variables pointed out by Bart] |
| CVE-2024-26626 | In the Linux kernel, the following vulnerability has been resolved: ipmr: fix kernel panic when forwarding mcast packets The stacktrace was: [ 86.305548] BUG: kernel NULL pointer dereference, address: 0000000000000092 [ 86.306815] #PF: supervisor read access in kernel mode [ 86.307717] #PF: error_code(0x0000) - not-present page [ 86.308624] PGD 0 P4D 0 [ 86.309091] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 86.309883] CPU: 2 PID: 3139 Comm: pimd Tainted: G U 6.8.0-6wind-knet #1 [ 86.311027] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014 [ 86.312728] RIP: 0010:ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.313399] Code: f9 1f 0f 87 85 03 00 00 48 8d 04 5b 48 8d 04 83 49 8d 44 c5 00 48 8b 40 70 48 39 c2 0f 84 d9 00 00 00 49 8b 46 58 48 83 e0 fe <80> b8 92 00 00 00 00 0f 84 55 ff ff ff 49 83 47 38 01 45 85 e4 0f [ 86.316565] RSP: 0018:ffffad21c0583ae0 EFLAGS: 00010246 [ 86.317497] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 86.318596] RDX: ffff9559cb46c000 RSI: 0000000000000000 RDI: 0000000000000000 [ 86.319627] RBP: ffffad21c0583b30 R08: 0000000000000000 R09: 0000000000000000 [ 86.320650] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 86.321672] R13: ffff9559c093a000 R14: ffff9559cc00b800 R15: ffff9559c09c1d80 [ 86.322873] FS: 00007f85db661980(0000) GS:ffff955a79d00000(0000) knlGS:0000000000000000 [ 86.324291] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 86.325314] CR2: 0000000000000092 CR3: 000000002f13a000 CR4: 0000000000350ef0 [ 86.326589] Call Trace: [ 86.327036] <TASK> [ 86.327434] ? show_regs (/build/work/knet/arch/x86/kernel/dumpstack.c:479) [ 86.328049] ? __die (/build/work/knet/arch/x86/kernel/dumpstack.c:421 /build/work/knet/arch/x86/kernel/dumpstack.c:434) [ 86.328508] ? page_fault_oops (/build/work/knet/arch/x86/mm/fault.c:707) [ 86.329107] ? do_user_addr_fault (/build/work/knet/arch/x86/mm/fault.c:1264) [ 86.329756] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.330350] ? __irq_work_queue_local (/build/work/knet/kernel/irq_work.c:111 (discriminator 1)) [ 86.331013] ? exc_page_fault (/build/work/knet/./arch/x86/include/asm/paravirt.h:693 /build/work/knet/arch/x86/mm/fault.c:1515 /build/work/knet/arch/x86/mm/fault.c:1563) [ 86.331702] ? asm_exc_page_fault (/build/work/knet/./arch/x86/include/asm/idtentry.h:570) [ 86.332468] ? ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.333183] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.333920] ipmr_mfc_add (/build/work/knet/./include/linux/rcupdate.h:782 /build/work/knet/net/ipv4/ipmr.c:1009 /build/work/knet/net/ipv4/ipmr.c:1273) [ 86.334583] ? __pfx_ipmr_hash_cmp (/build/work/knet/net/ipv4/ipmr.c:363) [ 86.335357] ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.336135] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.336854] ? ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.337679] do_ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:944) [ 86.338408] ? __pfx_unix_stream_read_actor (/build/work/knet/net/unix/af_unix.c:2862) [ 86.339232] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.339809] ? aa_sk_perm (/build/work/knet/security/apparmor/include/cred.h:153 /build/work/knet/security/apparmor/net.c:181) [ 86.340342] ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:1415) [ 86.340859] raw_setsockopt (/build/work/knet/net/ipv4/raw.c:836) [ 86.341408] ? security_socket_setsockopt (/build/work/knet/security/security.c:4561 (discriminator 13)) [ 86.342116] sock_common_setsockopt (/build/work/knet/net/core/sock.c:3716) [ 86.342747] do_sock_setsockopt (/build/work/knet/net/socket.c:2313) [ 86.343363] __sys_setsockopt (/build/work/knet/./include/linux/file.h:32 /build/work/kn ---truncated--- |
| CVE-2024-26625 | In the Linux kernel, the following vulnerability has been resolved: llc: call sock_orphan() at release time syzbot reported an interesting trace [1] caused by a stale sk->sk_wq pointer in a closed llc socket. In commit ff7b11aa481f ("net: socket: set sock->sk to NULL after calling proto_ops::release()") Eric Biggers hinted that some protocols are missing a sock_orphan(), we need to perform a full audit. In net-next, I plan to clear sock->sk from sock_orphan() and amend Eric patch to add a warning. [1] BUG: KASAN: slab-use-after-free in list_empty include/linux/list.h:373 [inline] BUG: KASAN: slab-use-after-free in waitqueue_active include/linux/wait.h:127 [inline] BUG: KASAN: slab-use-after-free in sock_def_write_space_wfree net/core/sock.c:3384 [inline] BUG: KASAN: slab-use-after-free in sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468 Read of size 8 at addr ffff88802f4fc880 by task ksoftirqd/1/27 CPU: 1 PID: 27 Comm: ksoftirqd/1 Not tainted 6.8.0-rc1-syzkaller-00049-g6098d87eaf31 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc4/0x620 mm/kasan/report.c:488 kasan_report+0xda/0x110 mm/kasan/report.c:601 list_empty include/linux/list.h:373 [inline] waitqueue_active include/linux/wait.h:127 [inline] sock_def_write_space_wfree net/core/sock.c:3384 [inline] sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468 skb_release_head_state+0xa3/0x2b0 net/core/skbuff.c:1080 skb_release_all net/core/skbuff.c:1092 [inline] napi_consume_skb+0x119/0x2b0 net/core/skbuff.c:1404 e1000_unmap_and_free_tx_resource+0x144/0x200 drivers/net/ethernet/intel/e1000/e1000_main.c:1970 e1000_clean_tx_irq drivers/net/ethernet/intel/e1000/e1000_main.c:3860 [inline] e1000_clean+0x4a1/0x26e0 drivers/net/ethernet/intel/e1000/e1000_main.c:3801 __napi_poll.constprop.0+0xb4/0x540 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x956/0xe90 net/core/dev.c:6778 __do_softirq+0x21a/0x8de kernel/softirq.c:553 run_ksoftirqd kernel/softirq.c:921 [inline] run_ksoftirqd+0x31/0x60 kernel/softirq.c:913 smpboot_thread_fn+0x660/0xa10 kernel/smpboot.c:164 kthread+0x2c6/0x3a0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 </TASK> Allocated by task 5167: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_lru+0x142/0x6f0 mm/slub.c:3879 alloc_inode_sb include/linux/fs.h:3019 [inline] sock_alloc_inode+0x25/0x1c0 net/socket.c:308 alloc_inode+0x5d/0x220 fs/inode.c:260 new_inode_pseudo+0x16/0x80 fs/inode.c:1005 sock_alloc+0x40/0x270 net/socket.c:634 __sock_create+0xbc/0x800 net/socket.c:1535 sock_create net/socket.c:1622 [inline] __sys_socket_create net/socket.c:1659 [inline] __sys_socket+0x14c/0x260 net/socket.c:1706 __do_sys_socket net/socket.c:1720 [inline] __se_sys_socket net/socket.c:1718 [inline] __x64_sys_socket+0x72/0xb0 net/socket.c:1718 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd3/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 0: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3f/0x60 mm/kasan/generic.c:640 poison_slab_object mm/kasan/common.c:241 [inline] __kasan_slab_free+0x121/0x1b0 mm/kasan/common.c:257 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2121 [inlin ---truncated--- |
| CVE-2024-26623 | In the Linux kernel, the following vulnerability has been resolved: pds_core: Prevent race issues involving the adminq There are multiple paths that can result in using the pdsc's adminq. [1] pdsc_adminq_isr and the resulting work from queue_work(), i.e. pdsc_work_thread()->pdsc_process_adminq() [2] pdsc_adminq_post() When the device goes through reset via PCIe reset and/or a fw_down/fw_up cycle due to bad PCIe state or bad device state the adminq is destroyed and recreated. A NULL pointer dereference can happen if [1] or [2] happens after the adminq is already destroyed. In order to fix this, add some further state checks and implement reference counting for adminq uses. Reference counting was used because multiple threads can attempt to access the adminq at the same time via [1] or [2]. Additionally, multiple clients (i.e. pds-vfio-pci) can be using [2] at the same time. The adminq_refcnt is initialized to 1 when the adminq has been allocated and is ready to use. Users/clients of the adminq (i.e. [1] and [2]) will increment the refcnt when they are using the adminq. When the driver goes into a fw_down cycle it will set the PDSC_S_FW_DEAD bit and then wait for the adminq_refcnt to hit 1. Setting the PDSC_S_FW_DEAD before waiting will prevent any further adminq_refcnt increments. Waiting for the adminq_refcnt to hit 1 allows for any current users of the adminq to finish before the driver frees the adminq. Once the adminq_refcnt hits 1 the driver clears the refcnt to signify that the adminq is deleted and cannot be used. On the fw_up cycle the driver will once again initialize the adminq_refcnt to 1 allowing the adminq to be used again. |
| CVE-2024-26622 | In the Linux kernel, the following vulnerability has been resolved: tomoyo: fix UAF write bug in tomoyo_write_control() Since tomoyo_write_control() updates head->write_buf when write() of long lines is requested, we need to fetch head->write_buf after head->io_sem is held. Otherwise, concurrent write() requests can cause use-after-free-write and double-free problems. |
| CVE-2024-26621 | In the Linux kernel, the following vulnerability has been resolved: mm: huge_memory: don't force huge page alignment on 32 bit commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP boundaries") caused two issues [1] [2] reported on 32 bit system or compat userspace. It doesn't make too much sense to force huge page alignment on 32 bit system due to the constrained virtual address space. [1] https://lore.kernel.org/linux-mm/[email protected]/ [2] https://lore.kernel.org/linux-mm/CAJuCfpHXLdQy1a2B6xN2d7quTYwg2OoZseYPZTRpU0eHHKD-sQ@mail.gmail.com/ |
| CVE-2024-26620 | In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: always filter entire AP matrix The vfio_ap_mdev_filter_matrix function is called whenever a new adapter or domain is assigned to the mdev. The purpose of the function is to update the guest's AP configuration by filtering the matrix of adapters and domains assigned to the mdev. When an adapter or domain is assigned, only the APQNs associated with the APID of the new adapter or APQI of the new domain are inspected. If an APQN does not reference a queue device bound to the vfio_ap device driver, then it's APID will be filtered from the mdev's matrix when updating the guest's AP configuration. Inspecting only the APID of the new adapter or APQI of the new domain will result in passing AP queues through to a guest that are not bound to the vfio_ap device driver under certain circumstances. Consider the following: guest's AP configuration (all also assigned to the mdev's matrix): 14.0004 14.0005 14.0006 16.0004 16.0005 16.0006 unassign domain 4 unbind queue 16.0005 assign domain 4 When domain 4 is re-assigned, since only domain 4 will be inspected, the APQNs that will be examined will be: 14.0004 16.0004 Since both of those APQNs reference queue devices that are bound to the vfio_ap device driver, nothing will get filtered from the mdev's matrix when updating the guest's AP configuration. Consequently, queue 16.0005 will get passed through despite not being bound to the driver. This violates the linux device model requirement that a guest shall only be given access to devices bound to the device driver facilitating their pass-through. To resolve this problem, every adapter and domain assigned to the mdev will be inspected when filtering the mdev's matrix. |
| CVE-2024-26619 | In the Linux kernel, the following vulnerability has been resolved: riscv: Fix module loading free order Reverse order of kfree calls to resolve use-after-free error. |
| CVE-2024-26618 | In the Linux kernel, the following vulnerability has been resolved: arm64/sme: Always exit sme_alloc() early with existing storage When sme_alloc() is called with existing storage and we are not flushing we will always allocate new storage, both leaking the existing storage and corrupting the state. Fix this by separating the checks for flushing and for existing storage as we do for SVE. Callers that reallocate (eg, due to changing the vector length) should call sme_free() themselves. |
| CVE-2024-26617 | In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: move mmu notification mechanism inside mm lock Move mmu notification mechanism inside mm lock to prevent race condition in other components which depend on it. The notifier will invalidate memory range. Depending upon the number of iterations, different memory ranges would be invalidated. The following warning would be removed by this patch: WARNING: CPU: 0 PID: 5067 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:734 kvm_mmu_notifier_change_pte+0x860/0x960 arch/x86/kvm/../../../virt/kvm/kvm_main.c:734 There is no behavioural and performance change with this patch when there is no component registered with the mmu notifier. [[email protected]: narrow the scope of `range', per Sean] |
| CVE-2024-26616 | In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: avoid use-after-free when chunk length is not 64K aligned [BUG] There is a bug report that, on a ext4-converted btrfs, scrub leads to various problems, including: - "unable to find chunk map" errors BTRFS info (device vdb): scrub: started on devid 1 BTRFS critical (device vdb): unable to find chunk map for logical 2214744064 length 4096 BTRFS critical (device vdb): unable to find chunk map for logical 2214744064 length 45056 This would lead to unrepariable errors. - Use-after-free KASAN reports: ================================================================== BUG: KASAN: slab-use-after-free in __blk_rq_map_sg+0x18f/0x7c0 Read of size 8 at addr ffff8881013c9040 by task btrfs/909 CPU: 0 PID: 909 Comm: btrfs Not tainted 6.7.0-x64v3-dbg #11 c50636e9419a8354555555245df535e380563b2b Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 2023.11-2 12/24/2023 Call Trace: <TASK> dump_stack_lvl+0x43/0x60 print_report+0xcf/0x640 kasan_report+0xa6/0xd0 __blk_rq_map_sg+0x18f/0x7c0 virtblk_prep_rq.isra.0+0x215/0x6a0 [virtio_blk 19a65eeee9ae6fcf02edfad39bb9ddee07dcdaff] virtio_queue_rqs+0xc4/0x310 [virtio_blk 19a65eeee9ae6fcf02edfad39bb9ddee07dcdaff] blk_mq_flush_plug_list.part.0+0x780/0x860 __blk_flush_plug+0x1ba/0x220 blk_finish_plug+0x3b/0x60 submit_initial_group_read+0x10a/0x290 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] flush_scrub_stripes+0x38e/0x430 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] scrub_stripe+0x82a/0xae0 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] scrub_chunk+0x178/0x200 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] scrub_enumerate_chunks+0x4bc/0xa30 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] btrfs_scrub_dev+0x398/0x810 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] btrfs_ioctl+0x4b9/0x3020 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] __x64_sys_ioctl+0xbd/0x100 do_syscall_64+0x5d/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f47e5e0952b - Crash, mostly due to above use-after-free [CAUSE] The converted fs has the following data chunk layout: item 2 key (FIRST_CHUNK_TREE CHUNK_ITEM 2214658048) itemoff 16025 itemsize 80 length 86016 owner 2 stripe_len 65536 type DATA|single For above logical bytenr 2214744064, it's at the chunk end (2214658048 + 86016 = 2214744064). This means btrfs_submit_bio() would split the bio, and trigger endio function for both of the two halves. However scrub_submit_initial_read() would only expect the endio function to be called once, not any more. This means the first endio function would already free the bbio::bio, leaving the bvec freed, thus the 2nd endio call would lead to use-after-free. [FIX] - Make sure scrub_read_endio() only updates bits in its range Since we may read less than 64K at the end of the chunk, we should not touch the bits beyond chunk boundary. - Make sure scrub_submit_initial_read() only to read the chunk range This is done by calculating the real number of sectors we need to read, and add sector-by-sector to the bio. Thankfully the scrub read repair path won't need extra fixes: - scrub_stripe_submit_repair_read() With above fixes, we won't update error bit for range beyond chunk, thus scrub_stripe_submit_repair_read() should never submit any read beyond the chunk. |
| CVE-2024-26615 | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix illegal rmb_desc access in SMC-D connection dump A crash was found when dumping SMC-D connections. It can be reproduced by following steps: - run nginx/wrk test: smc_run nginx smc_run wrk -t 16 -c 1000 -d <duration> -H 'Connection: Close' <URL> - continuously dump SMC-D connections in parallel: watch -n 1 'smcss -D' BUG: kernel NULL pointer dereference, address: 0000000000000030 CPU: 2 PID: 7204 Comm: smcss Kdump: loaded Tainted: G E 6.7.0+ #55 RIP: 0010:__smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag] Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x66/0x150 ? exc_page_fault+0x69/0x140 ? asm_exc_page_fault+0x26/0x30 ? __smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag] ? __kmalloc_node_track_caller+0x35d/0x430 ? __alloc_skb+0x77/0x170 smc_diag_dump_proto+0xd0/0xf0 [smc_diag] smc_diag_dump+0x26/0x60 [smc_diag] netlink_dump+0x19f/0x320 __netlink_dump_start+0x1dc/0x300 smc_diag_handler_dump+0x6a/0x80 [smc_diag] ? __pfx_smc_diag_dump+0x10/0x10 [smc_diag] sock_diag_rcv_msg+0x121/0x140 ? __pfx_sock_diag_rcv_msg+0x10/0x10 netlink_rcv_skb+0x5a/0x110 sock_diag_rcv+0x28/0x40 netlink_unicast+0x22a/0x330 netlink_sendmsg+0x1f8/0x420 __sock_sendmsg+0xb0/0xc0 ____sys_sendmsg+0x24e/0x300 ? copy_msghdr_from_user+0x62/0x80 ___sys_sendmsg+0x7c/0xd0 ? __do_fault+0x34/0x160 ? do_read_fault+0x5f/0x100 ? do_fault+0xb0/0x110 ? __handle_mm_fault+0x2b0/0x6c0 __sys_sendmsg+0x4d/0x80 do_syscall_64+0x69/0x180 entry_SYSCALL_64_after_hwframe+0x6e/0x76 It is possible that the connection is in process of being established when we dump it. Assumed that the connection has been registered in a link group by smc_conn_create() but the rmb_desc has not yet been initialized by smc_buf_create(), thus causing the illegal access to conn->rmb_desc. So fix it by checking before dump. |
| CVE-2024-26614 | In the Linux kernel, the following vulnerability has been resolved: tcp: make sure init the accept_queue's spinlocks once When I run syz's reproduction C program locally, it causes the following issue: pvqspinlock: lock 0xffff9d181cd5c660 has corrupted value 0x0! WARNING: CPU: 19 PID: 21160 at __pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508) Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508) Code: 73 56 3a ff 90 c3 cc cc cc cc 8b 05 bb 1f 48 01 85 c0 74 05 c3 cc cc cc cc 8b 17 48 89 fe 48 c7 c7 30 20 ce 8f e8 ad 56 42 ff <0f> 0b c3 cc cc cc cc 0f 0b 0f 1f 40 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa8d200604cb8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9d1ef60e0908 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9d1ef60e0900 RBP: ffff9d181cd5c280 R08: 0000000000000000 R09: 00000000ffff7fff R10: ffffa8d200604b68 R11: ffffffff907dcdc8 R12: 0000000000000000 R13: ffff9d181cd5c660 R14: ffff9d1813a3f330 R15: 0000000000001000 FS: 00007fa110184640(0000) GS:ffff9d1ef60c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000011f65e000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_unlock (kernel/locking/spinlock.c:186) inet_csk_reqsk_queue_add (net/ipv4/inet_connection_sock.c:1321) inet_csk_complete_hashdance (net/ipv4/inet_connection_sock.c:1358) tcp_check_req (net/ipv4/tcp_minisocks.c:868) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2260) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205) ip_local_deliver_finish (net/ipv4/ip_input.c:234) __netif_receive_skb_one_core (net/core/dev.c:5529) process_backlog (./include/linux/rcupdate.h:779) __napi_poll (net/core/dev.c:6533) net_rx_action (net/core/dev.c:6604) __do_softirq (./arch/x86/include/asm/jump_label.h:27) do_softirq (kernel/softirq.c:454 kernel/softirq.c:441) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:381) __dev_queue_xmit (net/core/dev.c:4374) ip_finish_output2 (./include/net/neighbour.h:540 net/ipv4/ip_output.c:235) __ip_queue_xmit (net/ipv4/ip_output.c:535) __tcp_transmit_skb (net/ipv4/tcp_output.c:1462) tcp_rcv_synsent_state_process (net/ipv4/tcp_input.c:6469) tcp_rcv_state_process (net/ipv4/tcp_input.c:6657) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1929) __release_sock (./include/net/sock.h:1121 net/core/sock.c:2968) release_sock (net/core/sock.c:3536) inet_wait_for_connect (net/ipv4/af_inet.c:609) __inet_stream_connect (net/ipv4/af_inet.c:702) inet_stream_connect (net/ipv4/af_inet.c:748) __sys_connect (./include/linux/file.h:45 net/socket.c:2064) __x64_sys_connect (net/socket.c:2073 net/socket.c:2070 net/socket.c:2070) do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:82) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7fa10ff05a3d Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48 RSP: 002b:00007fa110183de8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020000054 RCX: 00007fa10ff05a3d RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00007fa110183e20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fa110184640 R13: 0000000000000000 R14: 00007fa10fe8b060 R15: 00007fff73e23b20 </TASK> The issue triggering process is analyzed as follows: Thread A Thread B tcp_v4_rcv //receive ack TCP packet inet_shutdown tcp_check_req tcp_disconnect //disconnect sock ... tcp_set_state(sk, TCP_CLOSE) inet_csk_complete_hashdance ... inet_csk_reqsk_queue_add ---truncated--- |
| CVE-2024-26612 | In the Linux kernel, the following vulnerability has been resolved: netfs, fscache: Prevent Oops in fscache_put_cache() This function dereferences "cache" and then checks if it's IS_ERR_OR_NULL(). Check first, then dereference. |
| CVE-2024-26611 | In the Linux kernel, the following vulnerability has been resolved: xsk: fix usage of multi-buffer BPF helpers for ZC XDP Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ #257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appropriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail(). |
| CVE-2024-26610 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix a memory corruption iwl_fw_ini_trigger_tlv::data is a pointer to a __le32, which means that if we copy to iwl_fw_ini_trigger_tlv::data + offset while offset is in bytes, we'll write past the buffer. |
| CVE-2024-26608 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix global oob in ksmbd_nl_policy Similar to a reported issue (check the commit b33fb5b801c6 ("net: qualcomm: rmnet: fix global oob in rmnet_policy"), my local fuzzer finds another global out-of-bounds read for policy ksmbd_nl_policy. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff8f24b100 by task syz-executor.1/62810 CPU: 0 PID: 62810 Comm: syz-executor.1 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 __nlmsg_parse include/net/netlink.h:748 [inline] genl_family_rcv_msg_attrs_parse.constprop.0+0x1b0/0x290 net/netlink/genetlink.c:565 genl_family_rcv_msg_doit+0xda/0x330 net/netlink/genetlink.c:734 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x441/0x780 net/netlink/genetlink.c:850 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdd66a8f359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdd65e00168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdd66bbcf80 RCX: 00007fdd66a8f359 RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000003 RBP: 00007fdd66ada493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc84b81aff R14: 00007fdd65e00300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: ksmbd_nl_policy+0x100/0xa80 The buggy address belongs to the physical page: page:0000000034f47940 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1ccc4b flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00073312c8 ffffea00073312c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff8f24b000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff8f24b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff8f24b100: f9 f9 f9 f9 00 00 f9 f9 f9 f9 f9 f9 00 00 07 f9 ^ ffffffff8f24b180: f9 f9 f9 f9 00 05 f9 f9 f9 f9 f9 f9 00 00 00 05 ffffffff8f24b200: f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 00 00 04 f9 ================================================================== To fix it, add a placeholder named __KSMBD_EVENT_MAX and let KSMBD_EVENT_MAX to be its original value - 1 according to what other netlink families do. Also change two sites that refer the KSMBD_EVENT_MAX to correct value. |
| CVE-2024-26607 | In the Linux kernel, the following vulnerability has been resolved: drm/bridge: sii902x: Fix probing race issue A null pointer dereference crash has been observed rarely on TI platforms using sii9022 bridge: [ 53.271356] sii902x_get_edid+0x34/0x70 [sii902x] [ 53.276066] sii902x_bridge_get_edid+0x14/0x20 [sii902x] [ 53.281381] drm_bridge_get_edid+0x20/0x34 [drm] [ 53.286305] drm_bridge_connector_get_modes+0x8c/0xcc [drm_kms_helper] [ 53.292955] drm_helper_probe_single_connector_modes+0x190/0x538 [drm_kms_helper] [ 53.300510] drm_client_modeset_probe+0x1f0/0xbd4 [drm] [ 53.305958] __drm_fb_helper_initial_config_and_unlock+0x50/0x510 [drm_kms_helper] [ 53.313611] drm_fb_helper_initial_config+0x48/0x58 [drm_kms_helper] [ 53.320039] drm_fbdev_dma_client_hotplug+0x84/0xd4 [drm_dma_helper] [ 53.326401] drm_client_register+0x5c/0xa0 [drm] [ 53.331216] drm_fbdev_dma_setup+0xc8/0x13c [drm_dma_helper] [ 53.336881] tidss_probe+0x128/0x264 [tidss] [ 53.341174] platform_probe+0x68/0xc4 [ 53.344841] really_probe+0x188/0x3c4 [ 53.348501] __driver_probe_device+0x7c/0x16c [ 53.352854] driver_probe_device+0x3c/0x10c [ 53.357033] __device_attach_driver+0xbc/0x158 [ 53.361472] bus_for_each_drv+0x88/0xe8 [ 53.365303] __device_attach+0xa0/0x1b4 [ 53.369135] device_initial_probe+0x14/0x20 [ 53.373314] bus_probe_device+0xb0/0xb4 [ 53.377145] deferred_probe_work_func+0xcc/0x124 [ 53.381757] process_one_work+0x1f0/0x518 [ 53.385770] worker_thread+0x1e8/0x3dc [ 53.389519] kthread+0x11c/0x120 [ 53.392750] ret_from_fork+0x10/0x20 The issue here is as follows: - tidss probes, but is deferred as sii902x is still missing. - sii902x starts probing and enters sii902x_init(). - sii902x calls drm_bridge_add(). Now the sii902x bridge is ready from DRM's perspective. - sii902x calls sii902x_audio_codec_init() and platform_device_register_data() - The registration of the audio platform device causes probing of the deferred devices. - tidss probes, which eventually causes sii902x_bridge_get_edid() to be called. - sii902x_bridge_get_edid() tries to use the i2c to read the edid. However, the sii902x driver has not set up the i2c part yet, leading to the crash. Fix this by moving the drm_bridge_add() to the end of the sii902x_init(), which is also at the very end of sii902x_probe(). |
| CVE-2024-26606 | In the Linux kernel, the following vulnerability has been resolved: binder: signal epoll threads of self-work In (e)poll mode, threads often depend on I/O events to determine when data is ready for consumption. Within binder, a thread may initiate a command via BINDER_WRITE_READ without a read buffer and then make use of epoll_wait() or similar to consume any responses afterwards. It is then crucial that epoll threads are signaled via wakeup when they queue their own work. Otherwise, they risk waiting indefinitely for an event leaving their work unhandled. What is worse, subsequent commands won't trigger a wakeup either as the thread has pending work. |
| CVE-2024-26605 | In the Linux kernel, the following vulnerability has been resolved: PCI/ASPM: Fix deadlock when enabling ASPM A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. |
| CVE-2024-26604 | In the Linux kernel, the following vulnerability has been resolved: Revert "kobject: Remove redundant checks for whether ktype is NULL" This reverts commit 1b28cb81dab7c1eedc6034206f4e8d644046ad31. It is reported to cause problems, so revert it for now until the root cause can be found. |
| CVE-2024-26603 | In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Stop relying on userspace for info to fault in xsave buffer Before this change, the expected size of the user space buffer was taken from fx_sw->xstate_size. fx_sw->xstate_size can be changed from user-space, so it is possible construct a sigreturn frame where: * fx_sw->xstate_size is smaller than the size required by valid bits in fx_sw->xfeatures. * user-space unmaps parts of the sigrame fpu buffer so that not all of the buffer required by xrstor is accessible. In this case, xrstor tries to restore and accesses the unmapped area which results in a fault. But fault_in_readable succeeds because buf + fx_sw->xstate_size is within the still mapped area, so it goes back and tries xrstor again. It will spin in this loop forever. Instead, fault in the maximum size which can be touched by XRSTOR (taken from fpstate->user_size). [ dhansen: tweak subject / changelog ] |
| CVE-2024-26602 | In the Linux kernel, the following vulnerability has been resolved: sched/membarrier: reduce the ability to hammer on sys_membarrier On some systems, sys_membarrier can be very expensive, causing overall slowdowns for everything. So put a lock on the path in order to serialize the accesses to prevent the ability for this to be called at too high of a frequency and saturate the machine. |
| CVE-2024-26601 | In the Linux kernel, the following vulnerability has been resolved: ext4: regenerate buddy after block freeing failed if under fc replay This mostly reverts commit 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on code in mb_free_blocks(), fast commit replay can end up marking as free blocks that are already marked as such. This causes corruption of the buddy bitmap so we need to regenerate it in that case. |
| CVE-2024-26600 | In the Linux kernel, the following vulnerability has been resolved: phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL. |
| CVE-2024-26599 | In the Linux kernel, the following vulnerability has been resolved: pwm: Fix out-of-bounds access in of_pwm_single_xlate() With args->args_count == 2 args->args[2] is not defined. Actually the flags are contained in args->args[1]. |
| CVE-2024-26598 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache There is a potential UAF scenario in the case of an LPI translation cache hit racing with an operation that invalidates the cache, such as a DISCARD ITS command. The root of the problem is that vgic_its_check_cache() does not elevate the refcount on the vgic_irq before dropping the lock that serializes refcount changes. Have vgic_its_check_cache() raise the refcount on the returned vgic_irq and add the corresponding decrement after queueing the interrupt. |
| CVE-2024-26597 | In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: fix global oob in rmnet_policy The variable rmnet_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207 CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 nla_parse_nested_deprecated include/net/netlink.h:1248 [inline] __rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594 rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdcf2072359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359 RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003 RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: rmnet_policy+0x30/0xe0 The buggy address belongs to the physical page: page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243 flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07 ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9 >ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 ^ ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9 ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 According to the comment of `nla_parse_nested_deprecated`, the maxtype should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here. |
| CVE-2024-26596 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix netdev_priv() dereference before check on non-DSA netdevice events After the blamed commit, we started doing this dereference for every NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system. static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev) { struct dsa_user_priv *p = netdev_priv(dev); return p->dp; } Which is obviously bogus, because not all net_devices have a netdev_priv() of type struct dsa_user_priv. But struct dsa_user_priv is fairly small, and p->dp means dereferencing 8 bytes starting with offset 16. Most drivers allocate that much private memory anyway, making our access not fault, and we discard the bogus data quickly afterwards, so this wasn't caught. But the dummy interface is somewhat special in that it calls alloc_netdev() with a priv size of 0. So every netdev_priv() dereference is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event with a VLAN as its new upper: $ ip link add dummy1 type dummy $ ip link add link dummy1 name dummy1.100 type vlan id 100 [ 43.309174] ================================================================== [ 43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8 [ 43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374 [ 43.330058] [ 43.342436] Call trace: [ 43.366542] dsa_user_prechangeupper+0x30/0xe8 [ 43.371024] dsa_user_netdevice_event+0xb38/0xee8 [ 43.375768] notifier_call_chain+0xa4/0x210 [ 43.379985] raw_notifier_call_chain+0x24/0x38 [ 43.384464] __netdev_upper_dev_link+0x3ec/0x5d8 [ 43.389120] netdev_upper_dev_link+0x70/0xa8 [ 43.393424] register_vlan_dev+0x1bc/0x310 [ 43.397554] vlan_newlink+0x210/0x248 [ 43.401247] rtnl_newlink+0x9fc/0xe30 [ 43.404942] rtnetlink_rcv_msg+0x378/0x580 Avoid the kernel oops by dereferencing after the type check, as customary. |
| CVE-2024-26595 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path When calling mlxsw_sp_acl_tcam_region_destroy() from an error path after failing to attach the region to an ACL group, we hit a NULL pointer dereference upon 'region->group->tcam' [1]. Fix by retrieving the 'tcam' pointer using mlxsw_sp_acl_to_tcam(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:mlxsw_sp_acl_tcam_region_destroy+0xa0/0xd0 [...] Call Trace: mlxsw_sp_acl_tcam_vchunk_get+0x88b/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b |
| CVE-2024-26594 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate mech token in session setup If client send invalid mech token in session setup request, ksmbd validate and make the error if it is invalid. |
| CVE-2024-26593 | In the Linux kernel, the following vulnerability has been resolved: i2c: i801: Fix block process call transactions According to the Intel datasheets, software must reset the block buffer index twice for block process call transactions: once before writing the outgoing data to the buffer, and once again before reading the incoming data from the buffer. The driver is currently missing the second reset, causing the wrong portion of the block buffer to be read. |
| CVE-2024-26592 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix UAF issue in ksmbd_tcp_new_connection() The race is between the handling of a new TCP connection and its disconnection. It leads to UAF on `struct tcp_transport` in ksmbd_tcp_new_connection() function. |
| CVE-2024-26591 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix re-attachment branch in bpf_tracing_prog_attach The following case can cause a crash due to missing attach_btf: 1) load rawtp program 2) load fentry program with rawtp as target_fd 3) create tracing link for fentry program with target_fd = 0 4) repeat 3 In the end we have: - prog->aux->dst_trampoline == NULL - tgt_prog == NULL (because we did not provide target_fd to link_create) - prog->aux->attach_btf == NULL (the program was loaded with attach_prog_fd=X) - the program was loaded for tgt_prog but we have no way to find out which one BUG: kernel NULL pointer dereference, address: 0000000000000058 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15b/0x430 ? fixup_exception+0x22/0x330 ? exc_page_fault+0x6f/0x170 ? asm_exc_page_fault+0x22/0x30 ? bpf_tracing_prog_attach+0x279/0x560 ? btf_obj_id+0x5/0x10 bpf_tracing_prog_attach+0x439/0x560 __sys_bpf+0x1cf4/0x2de0 __x64_sys_bpf+0x1c/0x30 do_syscall_64+0x41/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Return -EINVAL in this situation. |
| CVE-2024-26590 | In the Linux kernel, the following vulnerability has been resolved: erofs: fix inconsistent per-file compression format EROFS can select compression algorithms on a per-file basis, and each per-file compression algorithm needs to be marked in the on-disk superblock for initialization. However, syzkaller can generate inconsistent crafted images that use an unsupported algorithmtype for specific inodes, e.g. use MicroLZMA algorithmtype even it's not set in `sbi->available_compr_algs`. This can lead to an unexpected "BUG: kernel NULL pointer dereference" if the corresponding decompressor isn't built-in. Fix this by checking against `sbi->available_compr_algs` for each m_algorithmformat request. Incorrect !erofs_sb_has_compr_cfgs preset bitmap is now fixed together since it was harmless previously. |
| CVE-2024-26589 | In the Linux kernel, the following vulnerability has been resolved: bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation. However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3: (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0, smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...] Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline] bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359 bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475 __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with "R7 pointer arithmetic on flow_keys prohibited". |
| CVE-2024-26588 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Prevent out-of-bounds memory access The test_tag test triggers an unhandled page fault: # ./test_tag [ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70 [ 130.640501] Oops[#3]: [ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf #47 61985c1d94084daa2432f771daa45b56b10d8d2a [ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40 [ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000 [ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000 [ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70 [ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0 [ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0 [ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000 [ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000 [ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988 [ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988 [ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 130.642658] BADV: ffff80001b898004 [ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)] [ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd) [ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8 [ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0 [ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000 [ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000 [ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000 [ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000 [ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558 [ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000 [ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc [ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0 [ 130.644572] ... [ 130.644629] Call Trace: [ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988 [ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec [ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0 [ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44 [ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588 [ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c [ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94 [ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158 [ 130.645507] [ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91 [ 130.645729] [ 130.646418] ---[ end trace 0000000000000000 ]--- On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at loading a BPF prog with 2039 instructions: prog = (struct bpf_prog *)ffff80001b894000 insn = (struct bpf_insn *)(prog->insnsi)fff ---truncated--- |
| CVE-2024-26587 | In the Linux kernel, the following vulnerability has been resolved: net: netdevsim: don't try to destroy PHC on VFs PHC gets initialized in nsim_init_netdevsim(), which is only called if (nsim_dev_port_is_pf()). Create a counterpart of nsim_init_netdevsim() and move the mock_phc_destroy() there. This fixes a crash trying to destroy netdevsim with VFs instantiated, as caught by running the devlink.sh test: BUG: kernel NULL pointer dereference, address: 00000000000000b8 RIP: 0010:mock_phc_destroy+0xd/0x30 Call Trace: <TASK> nsim_destroy+0x4a/0x70 [netdevsim] __nsim_dev_port_del+0x47/0x70 [netdevsim] nsim_dev_reload_destroy+0x105/0x120 [netdevsim] nsim_drv_remove+0x2f/0xb0 [netdevsim] device_release_driver_internal+0x1a1/0x210 bus_remove_device+0xd5/0x120 device_del+0x159/0x490 device_unregister+0x12/0x30 del_device_store+0x11a/0x1a0 [netdevsim] kernfs_fop_write_iter+0x130/0x1d0 vfs_write+0x30b/0x4b0 ksys_write+0x69/0xf0 do_syscall_64+0xcc/0x1e0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 |
| CVE-2024-26586 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix stack corruption When tc filters are first added to a net device, the corresponding local port gets bound to an ACL group in the device. The group contains a list of ACLs. In turn, each ACL points to a different TCAM region where the filters are stored. During forwarding, the ACLs are sequentially evaluated until a match is found. One reason to place filters in different regions is when they are added with decreasing priorities and in an alternating order so that two consecutive filters can never fit in the same region because of their key usage. In Spectrum-2 and newer ASICs the firmware started to report that the maximum number of ACLs in a group is more than 16, but the layout of the register that configures ACL groups (PAGT) was not updated to account for that. It is therefore possible to hit stack corruption [1] in the rare case where more than 16 ACLs in a group are required. Fix by limiting the maximum ACL group size to the minimum between what the firmware reports and the maximum ACLs that fit in the PAGT register. Add a test case to make sure the machine does not crash when this condition is hit. [1] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120 [...] dump_stack_lvl+0x36/0x50 panic+0x305/0x330 __stack_chk_fail+0x15/0x20 mlxsw_sp_acl_tcam_group_update+0x116/0x120 mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110 mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b |
| CVE-2024-26585 | In the Linux kernel, the following vulnerability has been resolved: tls: fix race between tx work scheduling and socket close Similarly to previous commit, the submitting thread (recvmsg/sendmsg) may exit as soon as the async crypto handler calls complete(). Reorder scheduling the work before calling complete(). This seems more logical in the first place, as it's the inverse order of what the submitting thread will do. |
| CVE-2024-26584 | In the Linux kernel, the following vulnerability has been resolved: net: tls: handle backlogging of crypto requests Since we're setting the CRYPTO_TFM_REQ_MAY_BACKLOG flag on our requests to the crypto API, crypto_aead_{encrypt,decrypt} can return -EBUSY instead of -EINPROGRESS in valid situations. For example, when the cryptd queue for AESNI is full (easy to trigger with an artificially low cryptd.cryptd_max_cpu_qlen), requests will be enqueued to the backlog but still processed. In that case, the async callback will also be called twice: first with err == -EINPROGRESS, which it seems we can just ignore, then with err == 0. Compared to Sabrina's original patch this version uses the new tls_*crypt_async_wait() helpers and converts the EBUSY to EINPROGRESS to avoid having to modify all the error handling paths. The handling is identical. |
| CVE-2024-26583 | In the Linux kernel, the following vulnerability has been resolved: tls: fix race between async notify and socket close The submitting thread (one which called recvmsg/sendmsg) may exit as soon as the async crypto handler calls complete() so any code past that point risks touching already freed data. Try to avoid the locking and extra flags altogether. Have the main thread hold an extra reference, this way we can depend solely on the atomic ref counter for synchronization. Don't futz with reiniting the completion, either, we are now tightly controlling when completion fires. |
| CVE-2024-26582 | In the Linux kernel, the following vulnerability has been resolved: net: tls: fix use-after-free with partial reads and async decrypt tls_decrypt_sg doesn't take a reference on the pages from clear_skb, so the put_page() in tls_decrypt_done releases them, and we trigger a use-after-free in process_rx_list when we try to read from the partially-read skb. |
| CVE-2024-26581 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: skip end interval element from gc rbtree lazy gc on insert might collect an end interval element that has been just added in this transactions, skip end interval elements that are not yet active. |
| CVE-2024-25744 | In the Linux kernel before 6.6.7, an untrusted VMM can trigger int80 syscall handling at any given point. This is related to arch/x86/coco/tdx/tdx.c and arch/x86/mm/mem_encrypt_amd.c. |
| CVE-2024-25743 | In the Linux kernel through 6.9, an untrusted hypervisor can inject virtual interrupts 0 and 14 at any point in time and can trigger the SIGFPE signal handler in userspace applications. This affects AMD SEV-SNP and AMD SEV-ES. |
| CVE-2024-25742 | In the Linux kernel before 6.9, an untrusted hypervisor can inject virtual interrupt 29 (#VC) at any point in time and can trigger its handler. This affects AMD SEV-SNP and AMD SEV-ES. |
| CVE-2024-25741 | printer_write in drivers/usb/gadget/function/f_printer.c in the Linux kernel through 6.7.4 does not properly call usb_ep_queue, which might allow attackers to cause a denial of service or have unspecified other impact. |
| CVE-2024-25740 | A memory leak flaw was found in the UBI driver in drivers/mtd/ubi/attach.c in the Linux kernel through 6.7.4 for UBI_IOCATT, because kobj->name is not released. |
| CVE-2024-25739 | create_empty_lvol in drivers/mtd/ubi/vtbl.c in the Linux kernel through 6.7.4 can attempt to allocate zero bytes, and crash, because of a missing check for ubi->leb_size. |
| CVE-2024-24986 | Improper access control in Linux kernel mode driver for some Intel(R) Ethernet Network Controllers and Adapters before version 28.3 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| CVE-2024-24898 | Exposure of Sensitive Information to an Unauthorized Actor vulnerability in openEuler kernel on Linux allows Resource Leak Exposure. This vulnerability is associated with program files https://gitee.Com/openeuler/kernel/blob/openEuler-1.0-LTS/drivers/staging/gmjstcm/tcm.C. This issue affects kernel: from 4.19.90-2109.1.0.0108 before 4.19.90-2403.4.0.0244. |
| CVE-2024-24891 | Exposure of Sensitive Information to an Unauthorized Actor vulnerability in openEuler kernel on Linux allows Resource Leak Exposure. This vulnerability is associated with program files https://gitee.Com/openeuler/kernel/blob/openEuler-1.0-LTS/drivers/staging/gmjstcm/tcm.C. This issue affects kernel: from 4.19.90-2109.1.0.0108 before 4.19.90-2403.4.0.0244. |
| CVE-2024-24864 | A race condition was found in the Linux kernel's media/dvb-core in dvbdmx_write() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue. |
| CVE-2024-24861 | A race condition was found in the Linux kernel's media/xc4000 device driver in xc4000 xc4000_get_frequency() function. This can result in return value overflow issue, possibly leading to malfunction or denial of service issue. |
| CVE-2024-24860 | A race condition was found in the Linux kernel's bluetooth device driver in {min,max}_key_size_set() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue. |
| CVE-2024-24859 | A race condition was found in the Linux kernel's net/bluetooth in sniff_{min,max}_interval_set() function. This can result in a bluetooth sniffing exception issue, possibly leading denial of service. |
| CVE-2024-24858 | A race condition was found in the Linux kernel's net/bluetooth in {conn,adv}_{min,max}_interval_set() function. This can result in I2cap connection or broadcast abnormality issue, possibly leading to denial of service. |
| CVE-2024-24857 | A race condition was found in the Linux kernel's net/bluetooth device driver in conn_info_{min,max}_age_set() function. This can result in integrity overflow issue, possibly leading to bluetooth connection abnormality or denial of service. |
| CVE-2024-24855 | A race condition was found in the Linux kernel's scsi device driver in lpfc_unregister_fcf_rescan() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue. |
| CVE-2024-23981 | Wrap-around error in Linux kernel mode driver for some Intel(R) Ethernet Network Controllers and Adapters before version 28.3 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| CVE-2024-23851 | copy_params in drivers/md/dm-ioctl.c in the Linux kernel through 6.7.1 can attempt to allocate more than INT_MAX bytes, and crash, because of a missing param_kernel->data_size check. This is related to ctl_ioctl. |
| CVE-2024-23850 | In btrfs_get_root_ref in fs/btrfs/disk-io.c in the Linux kernel through 6.7.1, there can be an assertion failure and crash because a subvolume can be read out too soon after its root item is inserted upon subvolume creation. |
| CVE-2024-23849 | In rds_recv_track_latency in net/rds/af_rds.c in the Linux kernel through 6.7.1, there is an off-by-one error for an RDS_MSG_RX_DGRAM_TRACE_MAX comparison, resulting in out-of-bounds access. |
| CVE-2024-23848 | In the Linux kernel through 6.7.1, there is a use-after-free in cec_queue_msg_fh, related to drivers/media/cec/core/cec-adap.c and drivers/media/cec/core/cec-api.c. |
| CVE-2024-23499 | Protection mechanism failure in Linux kernel mode driver for some Intel(R) Ethernet Network Controllers and Adapters E810 Series before version 28.3 may allow an unauthenticated user to potentially enable denial of service via network access. |
| CVE-2024-23497 | Out-of-bounds write in Linux kernel mode driver for some Intel(R) Ethernet Network Controllers and Adapters before version 28.3 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| CVE-2024-23307 | Integer Overflow or Wraparound vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (md, raid, raid5 modules) allows Forced Integer Overflow. |
| CVE-2024-23196 | A race condition was found in the Linux kernel's sound/hda device driver in snd_hdac_regmap_sync() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue. |
| CVE-2024-2314 | If kernel headers need to be extracted, bcc will attempt to load them from a temporary directory. An unprivileged attacker could use this to force bcc to load compromised linux headers. Linux distributions which provide kernel headers by default are not affected by default. |
| CVE-2024-2313 | If kernel headers need to be extracted, bpftrace will attempt to load them from a temporary directory. An unprivileged attacker could use this to force bcc to load compromised linux headers. Linux distributions which provide kernel headers by default are not affected by default. |
| CVE-2024-22705 | An issue was discovered in ksmbd in the Linux kernel before 6.6.10. smb2_get_data_area_len in fs/smb/server/smb2misc.c can cause an smb_strndup_from_utf16 out-of-bounds access because the relationship between Name data and CreateContexts data is mishandled. |
| CVE-2024-22386 | A race condition was found in the Linux kernel's drm/exynos device driver in exynos_drm_crtc_atomic_disable() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue. |
| CVE-2024-22099 | NULL Pointer Dereference vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (net, bluetooth modules) allows Overflow Buffers. This vulnerability is associated with program files /net/bluetooth/rfcomm/core.C. This issue affects Linux kernel: v2.6.12-rc2. |
| CVE-2024-2193 | A Speculative Race Condition (SRC) vulnerability that impacts modern CPU architectures supporting speculative execution (related to Spectre V1) has been disclosed. An unauthenticated attacker can exploit this vulnerability to disclose arbitrary data from the CPU using race conditions to access the speculative executable code paths. |
| CVE-2024-21810 | Improper input validation in the Linux kernel mode driver for some Intel(R) Ethernet Network Controllers and Adapters before version 28.3 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| CVE-2024-21807 | Improper initialization in the Linux kernel mode driver for some Intel(R) Ethernet Network Controllers and Adapters before version 28.3 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| CVE-2024-21806 | Improper conditions check in Linux kernel mode driver for some Intel(R) Ethernet Network Controllers and Adapters E810 Series before version 28.3 may allow an authenticated user to potentially enable denial of service via local access. |
| CVE-2024-21803 | Use After Free vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (bluetooth modules) allows Local Execution of Code. This vulnerability is associated with program files https://gitee.Com/anolis/cloud-kernel/blob/devel-5.10/net/bluetooth/af_bluetooth.C. This issue affects Linux kernel: from v2.6.12-rc2 before v6.8-rc1. |
| CVE-2024-1312 | A use-after-free flaw was found in the Linux kernel's Memory Management subsystem when a user wins two races at the same time with a fail in the mas_prev_slot function. This issue could allow a local user to crash the system. |
| CVE-2024-1151 | A vulnerability was reported in the Open vSwitch sub-component in the Linux Kernel. The flaw occurs when a recursive operation of code push recursively calls into the code block. The OVS module does not validate the stack depth, pushing too many frames and causing a stack overflow. As a result, this can lead to a crash or other related issues. |
| CVE-2024-1086 | A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. The nft_verdict_init() function allows positive values as drop error within the hook verdict, and hence the nf_hook_slow() function can cause a double free vulnerability when NF_DROP is issued with a drop error which resembles NF_ACCEPT. We recommend upgrading past commit f342de4e2f33e0e39165d8639387aa6c19dff660. |
| CVE-2024-1085 | A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. The nft_setelem_catchall_deactivate() function checks whether the catch-all set element is active in the current generation instead of the next generation before freeing it, but only flags it inactive in the next generation, making it possible to free the element multiple times, leading to a double free vulnerability. We recommend upgrading past commit b1db244ffd041a49ecc9618e8feb6b5c1afcdaa7. |
| CVE-2024-1067 | Use After Free vulnerability in Arm Ltd Bifrost GPU Kernel Driver, Arm Ltd Valhall GPU Kernel Driver, Arm Ltd Arm 5th Gen GPU Architecture Kernel Driver allows a local non-privileged user to make improper GPU memory processing operations. On Armv8.0 cores, there are certain combinations of the Linux Kernel and Mali GPU kernel driver configurations that would allow the GPU operations to affect the userspace memory of other processes. This issue affects Bifrost GPU Kernel Driver: from r41p0 through r47p0; Valhall GPU Kernel Driver: from r41p0 through r47p0; Arm 5th Gen GPU Architecture Kernel Driver: from r41p0 through r47p0. |
| CVE-2024-0841 | A null pointer dereference flaw was found in the hugetlbfs_fill_super function in the Linux kernel hugetlbfs (HugeTLB pages) functionality. This issue may allow a local user to crash the system or potentially escalate their privileges on the system. |
| CVE-2024-0775 | A use-after-free flaw was found in the __ext4_remount in fs/ext4/super.c in ext4 in the Linux kernel. This flaw allows a local user to cause an information leak problem while freeing the old quota file names before a potential failure, leading to a use-after-free. |
| CVE-2024-0646 | An out-of-bounds memory write flaw was found in the Linux kernel’s Transport Layer Security functionality in how a user calls a function splice with a ktls socket as the destination. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| CVE-2024-0607 | A flaw was found in the Netfilter subsystem in the Linux kernel. The issue is in the nft_byteorder_eval() function, where the code iterates through a loop and writes to the `dst` array. On each iteration, 8 bytes are written, but `dst` is an array of u32, so each element only has space for 4 bytes. That means every iteration overwrites part of the previous element corrupting this array of u32. This flaw allows a local user to cause a denial of service or potentially break NetFilter functionality. |
| CVE-2024-0582 | A memory leak flaw was found in the Linux kernel’s io_uring functionality in how a user registers a buffer ring with IORING_REGISTER_PBUF_RING, mmap() it, and then frees it. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| CVE-2024-0565 | An out-of-bounds memory read flaw was found in receive_encrypted_standard in fs/smb/client/smb2ops.c in the SMB Client sub-component in the Linux Kernel. This issue occurs due to integer underflow on the memcpy length, leading to a denial of service. |
| CVE-2024-0564 | A flaw was found in the Linux kernel's memory deduplication mechanism. The max page sharing of Kernel Samepage Merging (KSM), added in Linux kernel version 4.4.0-96.119, can create a side channel. When the attacker and the victim share the same host and the default setting of KSM is "max page sharing=256", it is possible for the attacker to time the unmap to merge with the victim's page. The unmapping time depends on whether it merges with the victim's page and additional physical pages are created beyond the KSM's "max page share". Through these operations, the attacker can leak the victim's page. |
| CVE-2024-0562 | A use-after-free flaw was found in the Linux Kernel. When a disk is removed, bdi_unregister is called to stop further write-back and waits for associated delayed work to complete. However, wb_inode_writeback_end() may schedule bandwidth estimation work after this has completed, which can result in the timer attempting to access the recently freed bdi_writeback. |
| CVE-2024-0443 | A flaw was found in the blkgs destruction path in block/blk-cgroup.c in the Linux kernel, leading to a cgroup blkio memory leakage problem. When a cgroup is being destroyed, cgroup_rstat_flush() is only called at css_release_work_fn(), which is called when the blkcg reference count reaches 0. This circular dependency will prevent blkcg and some blkgs from being freed after they are made offline. This issue may allow an attacker with a local access to cause system instability, such as an out of memory error. |
| CVE-2024-0340 | A vulnerability was found in vhost_new_msg in drivers/vhost/vhost.c in the Linux kernel, which does not properly initialize memory in messages passed between virtual guests and the host operating system in the vhost/vhost.c:vhost_new_msg() function. This issue can allow local privileged users to read some kernel memory contents when reading from the /dev/vhost-net device file. |
| CVE-2024-0193 | A use-after-free flaw was found in the netfilter subsystem of the Linux kernel. If the catchall element is garbage-collected when the pipapo set is removed, the element can be deactivated twice. This can cause a use-after-free issue on an NFT_CHAIN object or NFT_OBJECT object, allowing a local unprivileged user with CAP_NET_ADMIN capability to escalate their privileges on the system. |
| CVE-2024-0079 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a user in a guest VM can cause a NULL-pointer dereference in the host. A successful exploit of this vulnerability may lead to denial of service. |
| CVE-2024-0078 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a user in a guest can cause a NULL-pointer dereference in the host, which may lead to denial of service. |
| CVE-2023-7192 | A memory leak problem was found in ctnetlink_create_conntrack in net/netfilter/nf_conntrack_netlink.c in the Linux Kernel. This issue may allow a local attacker with CAP_NET_ADMIN privileges to cause a denial of service (DoS) attack due to a refcount overflow. |
| CVE-2023-7042 | A null pointer dereference vulnerability was found in ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev() in drivers/net/wireless/ath/ath10k/wmi-tlv.c in the Linux kernel. This issue could be exploited to trigger a denial of service. |
| CVE-2023-6932 | A use-after-free vulnerability in the Linux kernel's ipv4: igmp component can be exploited to achieve local privilege escalation. A race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread. We recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1. |
| CVE-2023-6931 | A heap out-of-bounds write vulnerability in the Linux kernel's Performance Events system component can be exploited to achieve local privilege escalation. A perf_event's read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group(). We recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b. |
| CVE-2023-6915 | A Null pointer dereference problem was found in ida_free in lib/idr.c in the Linux Kernel. This issue may allow an attacker using this library to cause a denial of service problem due to a missing check at a function return. |
| CVE-2023-6817 | A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. The function nft_pipapo_walk did not skip inactive elements during set walk which could lead double deactivations of PIPAPO (Pile Packet Policies) elements, leading to use-after-free. We recommend upgrading past commit 317eb9685095678f2c9f5a8189de698c5354316a. |
| CVE-2023-6679 | A null pointer dereference vulnerability was found in dpll_pin_parent_pin_set() in drivers/dpll/dpll_netlink.c in the Digital Phase Locked Loop (DPLL) subsystem in the Linux kernel. This issue could be exploited to trigger a denial of service. |
| CVE-2023-6622 | A null pointer dereference vulnerability was found in nft_dynset_init() in net/netfilter/nft_dynset.c in nf_tables in the Linux kernel. This issue may allow a local attacker with CAP_NET_ADMIN user privilege to trigger a denial of service. |
| CVE-2023-6610 | An out-of-bounds read vulnerability was found in smb2_dump_detail in fs/smb/client/smb2ops.c in the Linux Kernel. This issue could allow a local attacker to crash the system or leak internal kernel information. |
| CVE-2023-6606 | An out-of-bounds read vulnerability was found in smbCalcSize in fs/smb/client/netmisc.c in the Linux Kernel. This issue could allow a local attacker to crash the system or leak internal kernel information. |
| CVE-2023-6560 | An out-of-bounds memory access flaw was found in the io_uring SQ/CQ rings functionality in the Linux kernel. This issue could allow a local user to crash the system. |
| CVE-2023-6546 | A race condition was found in the GSM 0710 tty multiplexor in the Linux kernel. This issue occurs when two threads execute the GSMIOC_SETCONF ioctl on the same tty file descriptor with the gsm line discipline enabled, and can lead to a use-after-free problem on a struct gsm_dlci while restarting the gsm mux. This could allow a local unprivileged user to escalate their privileges on the system. |
| CVE-2023-6536 | A flaw was found in the Linux kernel's NVMe driver. This issue may allow an unauthenticated malicious actor to send a set of crafted TCP packages when using NVMe over TCP, leading the NVMe driver to a NULL pointer dereference in the NVMe driver, causing kernel panic and a denial of service. |
| CVE-2023-6535 | A flaw was found in the Linux kernel's NVMe driver. This issue may allow an unauthenticated malicious actor to send a set of crafted TCP packages when using NVMe over TCP, leading the NVMe driver to a NULL pointer dereference in the NVMe driver, causing kernel panic and a denial of service. |
| CVE-2023-6531 | A use-after-free flaw was found in the Linux Kernel due to a race problem in the unix garbage collector's deletion of SKB races with unix_stream_read_generic() on the socket that the SKB is queued on. |
| CVE-2023-6356 | A flaw was found in the Linux kernel's NVMe driver. This issue may allow an unauthenticated malicious actor to send a set of crafted TCP packages when using NVMe over TCP, leading the NVMe driver to a NULL pointer dereference in the NVMe driver and causing kernel panic and a denial of service. |
| CVE-2023-6270 | A flaw was found in the ATA over Ethernet (AoE) driver in the Linux kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on `struct net_device`, and a use-after-free can be triggered by racing between the free on the struct and the access through the `skbtxq` global queue. This could lead to a denial of service condition or potential code execution. |
| CVE-2023-6240 | A Marvin vulnerability side-channel leakage was found in the RSA decryption operation in the Linux Kernel. This issue may allow a network attacker to decrypt ciphertexts or forge signatures, limiting the services that use that private key. |
| CVE-2023-6238 | A buffer overflow vulnerability was found in the NVM Express (NVMe) driver in the Linux kernel. Only privileged user could specify a small meta buffer and let the device perform larger Direct Memory Access (DMA) into the same buffer, overwriting unrelated kernel memory, causing random kernel crashes and memory corruption. |
| CVE-2023-6200 | A race condition was found in the Linux Kernel. Under certain conditions, an unauthenticated attacker from an adjacent network could send an ICMPv6 router advertisement packet, causing arbitrary code execution. |
| CVE-2023-6176 | A null pointer dereference flaw was found in the Linux kernel API for the cryptographic algorithm scatterwalk functionality. This issue occurs when a user constructs a malicious packet with specific socket configuration, which could allow a local user to crash the system or escalate their privileges on the system. |
| CVE-2023-6121 | An out-of-bounds read vulnerability was found in the NVMe-oF/TCP subsystem in the Linux kernel. This issue may allow a remote attacker to send a crafted TCP packet, triggering a heap-based buffer overflow that results in kmalloc data being printed and potentially leaked to the kernel ring buffer (dmesg). |
| CVE-2023-6111 | A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. The function nft_trans_gc_catchall did not remove the catchall set element from the catchall_list when the argument sync is true, making it possible to free a catchall set element many times. We recommend upgrading past commit 93995bf4af2c5a99e2a87f0cd5ce547d31eb7630. |
| CVE-2023-6040 | An out-of-bounds access vulnerability involving netfilter was reported and fixed as: f1082dd31fe4 (netfilter: nf_tables: Reject tables of unsupported family); While creating a new netfilter table, lack of a safeguard against invalid nf_tables family (pf) values within `nf_tables_newtable` function enables an attacker to achieve out-of-bounds access. |
| CVE-2023-6039 | A use-after-free flaw was found in lan78xx_disconnect in drivers/net/usb/lan78xx.c in the network sub-component, net/usb/lan78xx in the Linux Kernel. This flaw allows a local attacker to crash the system when the LAN78XX USB device detaches. |
| CVE-2023-5972 | A null pointer dereference flaw was found in the nft_inner.c functionality of netfilter in the Linux kernel. This issue could allow a local user to crash the system or escalate their privileges on the system. |
| CVE-2023-5717 | A heap out-of-bounds write vulnerability in the Linux kernel's Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation. If perf_read_group() is called while an event's sibling_list is smaller than its child's sibling_list, it can increment or write to memory locations outside of the allocated buffer. We recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06. |
| CVE-2023-5345 | A use-after-free vulnerability in the Linux kernel's fs/smb/client component can be exploited to achieve local privilege escalation. In case of an error in smb3_fs_context_parse_param, ctx->password was freed but the field was not set to NULL which could lead to double free. We recommend upgrading past commit e6e43b8aa7cd3c3af686caf0c2e11819a886d705. |
| CVE-2023-52920 | In the Linux kernel, the following vulnerability has been resolved: bpf: support non-r10 register spill/fill to/from stack in precision tracking Use instruction (jump) history to record instructions that performed register spill/fill to/from stack, regardless if this was done through read-only r10 register, or any other register after copying r10 into it *and* potentially adjusting offset. To make this work reliably, we push extra per-instruction flags into instruction history, encoding stack slot index (spi) and stack frame number in extra 10 bit flags we take away from prev_idx in instruction history. We don't touch idx field for maximum performance, as it's checked most frequently during backtracking. This change removes basically the last remaining practical limitation of precision backtracking logic in BPF verifier. It fixes known deficiencies, but also opens up new opportunities to reduce number of verified states, explored in the subsequent patches. There are only three differences in selftests' BPF object files according to veristat, all in the positive direction (less states). File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) -------------------------------------- ------------- --------- --------- ------------- ---------- ---------- ------------- test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%) xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%) xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%) Note, I avoided renaming jmp_history to more generic insn_hist to minimize number of lines changed and potential merge conflicts between bpf and bpf-next trees. Notice also cur_hist_entry pointer reset to NULL at the beginning of instruction verification loop. This pointer avoids the problem of relying on last jump history entry's insn_idx to determine whether we already have entry for current instruction or not. It can happen that we added jump history entry because current instruction is_jmp_point(), but also we need to add instruction flags for stack access. In this case, we don't want to entries, so we need to reuse last added entry, if it is present. Relying on insn_idx comparison has the same ambiguity problem as the one that was fixed recently in [0], so we avoid that. [0] https://patchwork.kernel.org/project/netdevbpf/patch/[email protected]/ |
| CVE-2023-52919 | In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix possible NULL pointer dereference in send_acknowledge() Handle memory allocation failure from nci_skb_alloc() (calling alloc_skb()) to avoid possible NULL pointer dereference. |
| CVE-2023-52918 | In the Linux kernel, the following vulnerability has been resolved: media: pci: cx23885: check cx23885_vdev_init() return cx23885_vdev_init() can return a NULL pointer, but that pointer is used in the next line without a check. Add a NULL pointer check and go to the error unwind if it is NULL. |
| CVE-2023-52917 | In the Linux kernel, the following vulnerability has been resolved: ntb: intel: Fix the NULL vs IS_ERR() bug for debugfs_create_dir() The debugfs_create_dir() function returns error pointers. It never returns NULL. So use IS_ERR() to check it. |
| CVE-2023-52916 | In the Linux kernel, the following vulnerability has been resolved: media: aspeed: Fix memory overwrite if timing is 1600x900 When capturing 1600x900, system could crash when system memory usage is tight. The way to reproduce this issue: 1. Use 1600x900 to display on host 2. Mount ISO through 'Virtual media' on OpenBMC's web 3. Run script as below on host to do sha continuously #!/bin/bash while [ [1] ]; do find /media -type f -printf '"%h/%f"\n' | xargs sha256sum done 4. Open KVM on OpenBMC's web The size of macro block captured is 8x8. Therefore, we should make sure the height of src-buf is 8 aligned to fix this issue. |
| CVE-2023-52915 | In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer In af9035_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9035_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") |
| CVE-2023-52914 | In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: add hash if ready poll request can't complete inline If we don't, then we may lose access to it completely, leading to a request leak. This will eventually stall the ring exit process as well. |
| CVE-2023-52913 | In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential context UAFs gem_context_register() makes the context visible to userspace, and which point a separate thread can trigger the I915_GEM_CONTEXT_DESTROY ioctl. So we need to ensure that nothing uses the ctx ptr after this. And we need to ensure that adding the ctx to the xarray is the *last* thing that gem_context_register() does with the ctx pointer. [tursulin: Stable and fixes tags add/tidy.] (cherry picked from commit bed4b455cf5374e68879be56971c1da563bcd90c) |
| CVE-2023-52912 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fixed bug on error when unloading amdgpu Fixed bug on error when unloading amdgpu. The error message is as follows: [ 377.706202] kernel BUG at drivers/gpu/drm/drm_buddy.c:278! [ 377.706215] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 377.706222] CPU: 4 PID: 8610 Comm: modprobe Tainted: G IOE 6.0.0-thomas #1 [ 377.706231] Hardware name: ASUS System Product Name/PRIME Z390-A, BIOS 2004 11/02/2021 [ 377.706238] RIP: 0010:drm_buddy_free_block+0x26/0x30 [drm_buddy] [ 377.706264] Code: 00 00 00 90 0f 1f 44 00 00 48 8b 0e 89 c8 25 00 0c 00 00 3d 00 04 00 00 75 10 48 8b 47 18 48 d3 e0 48 01 47 28 e9 fa fe ff ff <0f> 0b 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 55 48 89 f5 53 [ 377.706282] RSP: 0018:ffffad2dc4683cb8 EFLAGS: 00010287 [ 377.706289] RAX: 0000000000000000 RBX: ffff8b1743bd5138 RCX: 0000000000000000 [ 377.706297] RDX: ffff8b1743bd5160 RSI: ffff8b1743bd5c78 RDI: ffff8b16d1b25f70 [ 377.706304] RBP: ffff8b1743bd59e0 R08: 0000000000000001 R09: 0000000000000001 [ 377.706311] R10: ffff8b16c8572400 R11: ffffad2dc4683cf0 R12: ffff8b16d1b25f70 [ 377.706318] R13: ffff8b16d1b25fd0 R14: ffff8b1743bd59c0 R15: ffff8b16d1b25f70 [ 377.706325] FS: 00007fec56c72c40(0000) GS:ffff8b1836500000(0000) knlGS:0000000000000000 [ 377.706334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 377.706340] CR2: 00007f9b88c1ba50 CR3: 0000000110450004 CR4: 00000000003706e0 [ 377.706347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 377.706354] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 377.706361] Call Trace: [ 377.706365] <TASK> [ 377.706369] drm_buddy_free_list+0x2a/0x60 [drm_buddy] [ 377.706376] amdgpu_vram_mgr_fini+0xea/0x180 [amdgpu] [ 377.706572] amdgpu_ttm_fini+0x12e/0x1a0 [amdgpu] [ 377.706650] amdgpu_bo_fini+0x22/0x90 [amdgpu] [ 377.706727] gmc_v11_0_sw_fini+0x26/0x30 [amdgpu] [ 377.706821] amdgpu_device_fini_sw+0xa1/0x3c0 [amdgpu] [ 377.706897] amdgpu_driver_release_kms+0x12/0x30 [amdgpu] [ 377.706975] drm_dev_release+0x20/0x40 [drm] [ 377.707006] release_nodes+0x35/0xb0 [ 377.707014] devres_release_all+0x8b/0xc0 [ 377.707020] device_unbind_cleanup+0xe/0x70 [ 377.707027] device_release_driver_internal+0xee/0x160 [ 377.707033] driver_detach+0x44/0x90 [ 377.707039] bus_remove_driver+0x55/0xe0 [ 377.707045] pci_unregister_driver+0x3b/0x90 [ 377.707052] amdgpu_exit+0x11/0x6c [amdgpu] [ 377.707194] __x64_sys_delete_module+0x142/0x2b0 [ 377.707201] ? fpregs_assert_state_consistent+0x22/0x50 [ 377.707208] ? exit_to_user_mode_prepare+0x3e/0x190 [ 377.707215] do_syscall_64+0x38/0x90 [ 377.707221] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| CVE-2023-52911 | In the Linux kernel, the following vulnerability has been resolved: drm/msm: another fix for the headless Adreno GPU Fix another oops reproducible when rebooting the board with the Adreno GPU working in the headless mode (e.g. iMX platforms). Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=74936831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] ARM CPU: 0 PID: 51 Comm: reboot Not tainted 6.2.0-rc1-dirty #11 Hardware name: Freescale i.MX53 (Device Tree Support) PC is at msm_atomic_commit_tail+0x50/0x970 LR is at commit_tail+0x9c/0x188 pc : [<c06aa430>] lr : [<c067a214>] psr: 600e0013 sp : e0851d30 ip : ee4eb7eb fp : 00090acc r10: 00000058 r9 : c2193014 r8 : c4310000 r7 : c4759380 r6 : 07bef61d r5 : 00000000 r4 : 00000000 r3 : c44cc440 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 74910019 DAC: 00000051 Register r0 information: NULL pointer Register r1 information: NULL pointer Register r2 information: NULL pointer Register r3 information: slab kmalloc-1k start c44cc400 pointer offset 64 size 1024 Register r4 information: NULL pointer Register r5 information: NULL pointer Register r6 information: non-paged memory Register r7 information: slab kmalloc-128 start c4759380 pointer offset 0 size 128 Register r8 information: slab kmalloc-2k start c4310000 pointer offset 0 size 2048 Register r9 information: non-slab/vmalloc memory Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: non-paged memory Process reboot (pid: 51, stack limit = 0xc80046d9) Stack: (0xe0851d30 to 0xe0852000) 1d20: c4759380 fbd77200 000005ff 002b9c70 1d40: c4759380 c4759380 00000000 07bef61d 00000600 c0d6fe7c c2193014 00000058 1d60: 00090acc c067a214 00000000 c4759380 c4310000 00000000 c44cc854 c067a89c 1d80: 00000000 00000000 00000000 c4310468 00000000 c4759380 c4310000 c4310468 1da0: c4310470 c0643258 c4759380 00000000 00000000 c0c4ee24 00000000 c44cc810 1dc0: 00000000 c0c4ee24 00000000 c44cc810 00000000 0347d2a8 e0851e00 e0851e00 1de0: c4759380 c067ad20 c4310000 00000000 c44cc810 c27f8718 c44cc854 c067adb8 1e00: c4933000 00000002 00000001 00000000 00000000 c2130850 00000000 c2130854 1e20: c25fc488 00000000 c0ff162c 00000000 00000001 00000002 00000000 00000000 1e40: c43102c0 c43102c0 00000000 0347d2a8 c44cc810 c44cc814 c2133da8 c06d1a60 1e60: 00000000 00000000 00079028 c2012f24 fee1dead c4933000 00000058 c01431e4 1e80: 01234567 c0143a20 00000000 00000000 00000000 00000000 00000000 00000000 1ea0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f80: 00000000 00000000 00000000 0347d2a8 00000002 00000004 00000078 00000058 1fa0: c010028c c0100060 00000002 00000004 fee1dead 28121969 01234567 00079028 1fc0: 00000002 00000004 00000078 00000058 0002fdc5 00000000 00000000 00090acc 1fe0: 00000058 becc9c64 b6e97e05 b6e0e5f6 600e0030 fee1dead 00000000 00000000 msm_atomic_commit_tail from commit_tail+0x9c/0x188 commit_tail from drm_atomic_helper_commit+0x160/0x188 drm_atomic_helper_commit from drm_atomic_commit+0xac/0xe0 drm_atomic_commit from drm_atomic_helper_disable_all+0x1b0/0x1c0 drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x88/0x140 drm_atomic_helper_shutdown from device_shutdown+0x16c/0x240 device_shutdown from kernel_restart+0x38/0x90 kernel_restart from __do_sys_reboot+0x ---truncated--- |
| CVE-2023-52910 | In the Linux kernel, the following vulnerability has been resolved: iommu/iova: Fix alloc iova overflows issue In __alloc_and_insert_iova_range, there is an issue that retry_pfn overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will overflow. As a result, if the retry logic is executed, low_pfn is updated to 0, and then new_pfn < low_pfn returns false to make the allocation successful. This issue occurs in the following two situations: 1. The first iova size exceeds the domain size. When initializing iova domain, iovad->cached_node is assigned as iovad->anchor. For example, the iova domain size is 10M, start_pfn is 0x1_F000_0000, and the iova size allocated for the first time is 11M. The following is the log information, new->pfn_lo is smaller than iovad->cached_node. Example log as follows: [ 223.798112][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range start_pfn:0x1f0000,retry_pfn:0x0,size:0xb00,limit_pfn:0x1f0a00 [ 223.799590][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range success start_pfn:0x1f0000,new->pfn_lo:0x1efe00,new->pfn_hi:0x1f08ff 2. The node with the largest iova->pfn_lo value in the iova domain is deleted, iovad->cached_node will be updated to iovad->anchor, and then the alloc iova size exceeds the maximum iova size that can be allocated in the domain. After judging that retry_pfn is less than limit_pfn, call retry_pfn+1 to fix the overflow issue. |
| CVE-2023-52909 | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix handling of cached open files in nfsd4_open codepath Commit fb70bf124b05 ("NFSD: Instantiate a struct file when creating a regular NFSv4 file") added the ability to cache an open fd over a compound. There are a couple of problems with the way this currently works: It's racy, as a newly-created nfsd_file can end up with its PENDING bit cleared while the nf is hashed, and the nf_file pointer is still zeroed out. Other tasks can find it in this state and they expect to see a valid nf_file, and can oops if nf_file is NULL. Also, there is no guarantee that we'll end up creating a new nfsd_file if one is already in the hash. If an extant entry is in the hash with a valid nf_file, nfs4_get_vfs_file will clobber its nf_file pointer with the value of op_file and the old nf_file will leak. Fix both issues by making a new nfsd_file_acquirei_opened variant that takes an optional file pointer. If one is present when this is called, we'll take a new reference to it instead of trying to open the file. If the nfsd_file already has a valid nf_file, we'll just ignore the optional file and pass the nfsd_file back as-is. Also rework the tracepoints a bit to allow for an "opened" variant and don't try to avoid counting acquisitions in the case where we already have a cached open file. |
| CVE-2023-52908 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential NULL dereference Fix potential NULL dereference, in the case when "man", the resource manager might be NULL, when/if we print debug information. |
| CVE-2023-52907 | In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame() Fix a use-after-free that occurs in hcd when in_urb sent from pn533_usb_send_frame() is completed earlier than out_urb. Its callback frees the skb data in pn533_send_async_complete() that is used as a transfer buffer of out_urb. Wait before sending in_urb until the callback of out_urb is called. To modify the callback of out_urb alone, separate the complete function of out_urb and ack_urb. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in dummy_timer Call Trace: memcpy (mm/kasan/shadow.c:65) dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352) transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972) arch_static_branch (arch/x86/include/asm/jump_label.h:27) static_key_false (include/linux/jump_label.h:207) timer_expire_exit (include/trace/events/timer.h:127) call_timer_fn (kernel/time/timer.c:1475) expire_timers (kernel/time/timer.c:1519) __run_timers (kernel/time/timer.c:1790) run_timer_softirq (kernel/time/timer.c:1803) |
| CVE-2023-52906 | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mpls: Fix warning during failed attribute validation The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid combination according to the comment above 'struct nla_policy': " Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN: NLA_BINARY Validation function called for the attribute. All other Unused - but note that it's a union " This can trigger the warning [1] in nla_get_range_unsigned() when validation of the attribute fails. Despite being of 'NLA_U32' type, the associated 'min'/'max' fields in the policy are negative as they are aliased by the 'validate' field. Fix by changing the attribute type to 'NLA_BINARY' which is consistent with the above comment and all other users of NLA_POLICY_VALIDATE_FN(). As a result, move the length validation to the validation function. No regressions in MPLS tests: # ./tdc.py -f tc-tests/actions/mpls.json [...] # echo $? 0 [1] WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118 nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 Modules linked in: CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 [...] Call Trace: <TASK> __netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310 netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411 netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline] netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506 netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2482 ___sys_sendmsg net/socket.c:2536 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2565 __do_sys_sendmsg net/socket.c:2574 [inline] __se_sys_sendmsg net/socket.c:2572 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2572 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| CVE-2023-52905 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix resource leakage in VF driver unbind resources allocated like mcam entries to support the Ntuple feature and hash tables for the tc feature are not getting freed in driver unbind. This patch fixes the issue. |
| CVE-2023-52904 | In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate() The subs function argument may be NULL, so do not use it before the NULL check. |
| CVE-2023-52903 | In the Linux kernel, the following vulnerability has been resolved: io_uring: lock overflowing for IOPOLL syzbot reports an issue with overflow filling for IOPOLL: WARNING: CPU: 0 PID: 28 at io_uring/io_uring.c:734 io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734 CPU: 0 PID: 28 Comm: kworker/u4:1 Not tainted 6.2.0-rc3-syzkaller-16369-g358a161a6a9e #0 Workqueue: events_unbound io_ring_exit_work Call trace: io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734 io_req_cqe_overflow+0x5c/0x70 io_uring/io_uring.c:773 io_fill_cqe_req io_uring/io_uring.h:168 [inline] io_do_iopoll+0x474/0x62c io_uring/rw.c:1065 io_iopoll_try_reap_events+0x6c/0x108 io_uring/io_uring.c:1513 io_uring_try_cancel_requests+0x13c/0x258 io_uring/io_uring.c:3056 io_ring_exit_work+0xec/0x390 io_uring/io_uring.c:2869 process_one_work+0x2d8/0x504 kernel/workqueue.c:2289 worker_thread+0x340/0x610 kernel/workqueue.c:2436 kthread+0x12c/0x158 kernel/kthread.c:376 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:863 There is no real problem for normal IOPOLL as flush is also called with uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL, for which __io_cqring_overflow_flush() happens from the CQ waiting path. |
| CVE-2023-52902 | In the Linux kernel, the following vulnerability has been resolved: nommu: fix memory leak in do_mmap() error path The preallocation of the maple tree nodes may leak if the error path to "error_just_free" is taken. Fix this by moving the freeing of the maple tree nodes to a shared location for all error paths. |
| CVE-2023-52901 | In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Check endpoint is valid before dereferencing it When the host controller is not responding, all URBs queued to all endpoints need to be killed. This can cause a kernel panic if we dereference an invalid endpoint. Fix this by using xhci_get_virt_ep() helper to find the endpoint and checking if the endpoint is valid before dereferencing it. [233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead [233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 [233311.853964] pc : xhci_hc_died+0x10c/0x270 [233311.853971] lr : xhci_hc_died+0x1ac/0x270 [233311.854077] Call trace: [233311.854085] xhci_hc_died+0x10c/0x270 [233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4 [233311.854105] call_timer_fn+0x50/0x2d4 [233311.854112] expire_timers+0xac/0x2e4 [233311.854118] run_timer_softirq+0x300/0xabc [233311.854127] __do_softirq+0x148/0x528 [233311.854135] irq_exit+0x194/0x1a8 [233311.854143] __handle_domain_irq+0x164/0x1d0 [233311.854149] gic_handle_irq.22273+0x10c/0x188 [233311.854156] el1_irq+0xfc/0x1a8 [233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm] [233311.854185] cpuidle_enter_state+0x1f0/0x764 [233311.854194] do_idle+0x594/0x6ac [233311.854201] cpu_startup_entry+0x7c/0x80 [233311.854209] secondary_start_kernel+0x170/0x198 |
| CVE-2023-52900 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix general protection fault in nilfs_btree_insert() If nilfs2 reads a corrupted disk image and tries to reads a b-tree node block by calling __nilfs_btree_get_block() against an invalid virtual block address, it returns -ENOENT because conversion of the virtual block address to a disk block address fails. However, this return value is the same as the internal code that b-tree lookup routines return to indicate that the block being searched does not exist, so functions that operate on that b-tree may misbehave. When nilfs_btree_insert() receives this spurious 'not found' code from nilfs_btree_do_lookup(), it misunderstands that the 'not found' check was successful and continues the insert operation using incomplete lookup path data, causing the following crash: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] ... RIP: 0010:nilfs_btree_get_nonroot_node fs/nilfs2/btree.c:418 [inline] RIP: 0010:nilfs_btree_prepare_insert fs/nilfs2/btree.c:1077 [inline] RIP: 0010:nilfs_btree_insert+0x6d3/0x1c10 fs/nilfs2/btree.c:1238 Code: bc 24 80 00 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89 ff e8 4b 02 92 fe 4d 8b 3f 49 83 c7 28 4c 89 f8 48 c1 e8 03 <42> 80 3c 28 00 74 08 4c 89 ff e8 2e 02 92 fe 4d 8b 3f 49 83 c7 02 ... Call Trace: <TASK> nilfs_bmap_do_insert fs/nilfs2/bmap.c:121 [inline] nilfs_bmap_insert+0x20d/0x360 fs/nilfs2/bmap.c:147 nilfs_get_block+0x414/0x8d0 fs/nilfs2/inode.c:101 __block_write_begin_int+0x54c/0x1a80 fs/buffer.c:1991 __block_write_begin fs/buffer.c:2041 [inline] block_write_begin+0x93/0x1e0 fs/buffer.c:2102 nilfs_write_begin+0x9c/0x110 fs/nilfs2/inode.c:261 generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772 __generic_file_write_iter+0x176/0x400 mm/filemap.c:3900 generic_file_write_iter+0xab/0x310 mm/filemap.c:3932 call_write_iter include/linux/fs.h:2186 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> This patch fixes the root cause of this problem by replacing the error code that __nilfs_btree_get_block() returns on block address conversion failure from -ENOENT to another internal code -EINVAL which means that the b-tree metadata is corrupted. By returning -EINVAL, it propagates without glitches, and for all relevant b-tree operations, functions in the upper bmap layer output an error message indicating corrupted b-tree metadata via nilfs_bmap_convert_error(), and code -EIO will be eventually returned as it should be. |
| CVE-2023-52899 | In the Linux kernel, the following vulnerability has been resolved: Add exception protection processing for vd in axi_chan_handle_err function Since there is no protection for vd, a kernel panic will be triggered here in exceptional cases. You can refer to the processing of axi_chan_block_xfer_complete function The triggered kernel panic is as follows: [ 67.848444] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 67.848447] Mem abort info: [ 67.848449] ESR = 0x96000004 [ 67.848451] EC = 0x25: DABT (current EL), IL = 32 bits [ 67.848454] SET = 0, FnV = 0 [ 67.848456] EA = 0, S1PTW = 0 [ 67.848458] Data abort info: [ 67.848460] ISV = 0, ISS = 0x00000004 [ 67.848462] CM = 0, WnR = 0 [ 67.848465] user pgtable: 4k pages, 48-bit VAs, pgdp=00000800c4c0b000 [ 67.848468] [0000000000000060] pgd=0000000000000000, p4d=0000000000000000 [ 67.848472] Internal error: Oops: 96000004 [#1] SMP [ 67.848475] Modules linked in: dmatest [ 67.848479] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.100-emu_x2rc+ #11 [ 67.848483] pstate: 62000085 (nZCv daIf -PAN -UAO +TCO BTYPE=--) [ 67.848487] pc : axi_chan_handle_err+0xc4/0x230 [ 67.848491] lr : axi_chan_handle_err+0x30/0x230 [ 67.848493] sp : ffff0803fe55ae50 [ 67.848495] x29: ffff0803fe55ae50 x28: ffff800011212200 [ 67.848500] x27: ffff0800c42c0080 x26: ffff0800c097c080 [ 67.848504] x25: ffff800010d33880 x24: ffff80001139d850 [ 67.848508] x23: ffff0800c097c168 x22: 0000000000000000 [ 67.848512] x21: 0000000000000080 x20: 0000000000002000 [ 67.848517] x19: ffff0800c097c080 x18: 0000000000000000 [ 67.848521] x17: 0000000000000000 x16: 0000000000000000 [ 67.848525] x15: 0000000000000000 x14: 0000000000000000 [ 67.848529] x13: 0000000000000000 x12: 0000000000000040 [ 67.848533] x11: ffff0800c0400248 x10: ffff0800c040024a [ 67.848538] x9 : ffff800010576cd4 x8 : ffff0800c0400270 [ 67.848542] x7 : 0000000000000000 x6 : ffff0800c04003e0 [ 67.848546] x5 : ffff0800c0400248 x4 : ffff0800c4294480 [ 67.848550] x3 : dead000000000100 x2 : dead000000000122 [ 67.848555] x1 : 0000000000000100 x0 : ffff0800c097c168 [ 67.848559] Call trace: [ 67.848562] axi_chan_handle_err+0xc4/0x230 [ 67.848566] dw_axi_dma_interrupt+0xf4/0x590 [ 67.848569] __handle_irq_event_percpu+0x60/0x220 [ 67.848573] handle_irq_event+0x64/0x120 [ 67.848576] handle_fasteoi_irq+0xc4/0x220 [ 67.848580] __handle_domain_irq+0x80/0xe0 [ 67.848583] gic_handle_irq+0xc0/0x138 [ 67.848585] el1_irq+0xc8/0x180 [ 67.848588] arch_cpu_idle+0x14/0x2c [ 67.848591] default_idle_call+0x40/0x16c [ 67.848594] do_idle+0x1f0/0x250 [ 67.848597] cpu_startup_entry+0x2c/0x60 [ 67.848600] rest_init+0xc0/0xcc [ 67.848603] arch_call_rest_init+0x14/0x1c [ 67.848606] start_kernel+0x4cc/0x500 [ 67.848610] Code: eb0002ff 9a9f12d6 f2fbd5a2 f2fbd5a3 (a94602c1) [ 67.848613] ---[ end trace 585a97036f88203a ]--- |
| CVE-2023-52898 | In the Linux kernel, the following vulnerability has been resolved: xhci: Fix null pointer dereference when host dies Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race and cause null pointer dereference when host suddenly dies. Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id] virt device at the same time that xhci_kill_endpoint_urbs() tries to loop through all the device's endpoints, checking if there are any cancelled urbs left to give back. hold the xhci spinlock while freeing the virt device |
| CVE-2023-52897 | In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: do not warn on record without old_roots populated [BUG] There are some reports from the mailing list that since v6.1 kernel, the WARN_ON() inside btrfs_qgroup_account_extent() gets triggered during rescan: WARNING: CPU: 3 PID: 6424 at fs/btrfs/qgroup.c:2756 btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs] CPU: 3 PID: 6424 Comm: snapperd Tainted: P OE 6.1.2-1-default #1 openSUSE Tumbleweed 05c7a1b1b61d5627475528f71f50444637b5aad7 RIP: 0010:btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs] Call Trace: <TASK> btrfs_commit_transaction+0x30c/0xb40 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] ? start_transaction+0xc3/0x5b0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] btrfs_qgroup_rescan+0x42/0xc0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] btrfs_ioctl+0x1ab9/0x25c0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] ? __rseq_handle_notify_resume+0xa9/0x4a0 ? mntput_no_expire+0x4a/0x240 ? __seccomp_filter+0x319/0x4d0 __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x5b/0x80 ? syscall_exit_to_user_mode+0x17/0x40 ? do_syscall_64+0x67/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd9b790d9bf </TASK> [CAUSE] Since commit e15e9f43c7ca ("btrfs: introduce BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting"), if our qgroup is already in inconsistent state, we will no longer do the time-consuming backref walk. This can leave some qgroup records without a valid old_roots ulist. Normally this is fine, as btrfs_qgroup_account_extents() would also skip those records if we have NO_ACCOUNTING flag set. But there is a small window, if we have NO_ACCOUNTING flag set, and inserted some qgroup_record without a old_roots ulist, but then the user triggered a qgroup rescan. During btrfs_qgroup_rescan(), we firstly clear NO_ACCOUNTING flag, then commit current transaction. And since we have a qgroup_record with old_roots = NULL, we trigger the WARN_ON() during btrfs_qgroup_account_extents(). [FIX] Unfortunately due to the introduction of NO_ACCOUNTING flag, the assumption that every qgroup_record would have its old_roots populated is no longer correct. Fix the false alerts and drop the WARN_ON(). |
| CVE-2023-52896 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between quota rescan and disable leading to NULL pointer deref If we have one task trying to start the quota rescan worker while another one is trying to disable quotas, we can end up hitting a race that results in the quota rescan worker doing a NULL pointer dereference. The steps for this are the following: 1) Quotas are enabled; 2) Task A calls the quota rescan ioctl and enters btrfs_qgroup_rescan(). It calls qgroup_rescan_init() which returns 0 (success) and then joins a transaction and commits it; 3) Task B calls the quota disable ioctl and enters btrfs_quota_disable(). It clears the bit BTRFS_FS_QUOTA_ENABLED from fs_info->flags and calls btrfs_qgroup_wait_for_completion(), which returns immediately since the rescan worker is not yet running. Then it starts a transaction and locks fs_info->qgroup_ioctl_lock; 4) Task A queues the rescan worker, by calling btrfs_queue_work(); 5) The rescan worker starts, and calls rescan_should_stop() at the start of its while loop, which results in 0 iterations of the loop, since the flag BTRFS_FS_QUOTA_ENABLED was cleared from fs_info->flags by task B at step 3); 6) Task B sets fs_info->quota_root to NULL; 7) The rescan worker tries to start a transaction and uses fs_info->quota_root as the root argument for btrfs_start_transaction(). This results in a NULL pointer dereference down the call chain of btrfs_start_transaction(). The stack trace is something like the one reported in Link tag below: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f] CPU: 1 PID: 34 Comm: kworker/u4:2 Not tainted 6.1.0-syzkaller-13872-gb6bb9676f216 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: btrfs-qgroup-rescan btrfs_work_helper RIP: 0010:start_transaction+0x48/0x10f0 fs/btrfs/transaction.c:564 Code: 48 89 fb 48 (...) RSP: 0018:ffffc90000ab7ab0 EFLAGS: 00010206 RAX: 0000000000000041 RBX: 0000000000000208 RCX: ffff88801779ba80 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: dffffc0000000000 R08: 0000000000000001 R09: fffff52000156f5d R10: fffff52000156f5d R11: 1ffff92000156f5c R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2bea75b718 CR3: 000000001d0cc000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btrfs_qgroup_rescan_worker+0x3bb/0x6a0 fs/btrfs/qgroup.c:3402 btrfs_work_helper+0x312/0x850 fs/btrfs/async-thread.c:280 process_one_work+0x877/0xdb0 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> Modules linked in: So fix this by having the rescan worker function not attempt to start a transaction if it didn't do any rescan work. |
| CVE-2023-52895 | In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: don't reissue in case of poll race on multishot request A previous commit fixed a poll race that can occur, but it's only applicable for multishot requests. For a multishot request, we can safely ignore a spurious wakeup, as we never leave the waitqueue to begin with. A blunt reissue of a multishot armed request can cause us to leak a buffer, if they are ring provided. While this seems like a bug in itself, it's not really defined behavior to reissue a multishot request directly. It's less efficient to do so as well, and not required to rearm anything like it is for singleshot poll requests. |
| CVE-2023-52894 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate() In Google internal bug 265639009 we've received an (as yet) unreproducible crash report from an aarch64 GKI 5.10.149-android13 running device. AFAICT the source code is at: https://android.googlesource.com/kernel/common/+/refs/tags/ASB-2022-12-05_13-5.10 The call stack is: ncm_close() -> ncm_notify() -> ncm_do_notify() with the crash at: ncm_do_notify+0x98/0x270 Code: 79000d0b b9000a6c f940012a f9400269 (b9405d4b) Which I believe disassembles to (I don't know ARM assembly, but it looks sane enough to me...): // halfword (16-bit) store presumably to event->wLength (at offset 6 of struct usb_cdc_notification) 0B 0D 00 79 strh w11, [x8, #6] // word (32-bit) store presumably to req->Length (at offset 8 of struct usb_request) 6C 0A 00 B9 str w12, [x19, #8] // x10 (NULL) was read here from offset 0 of valid pointer x9 // IMHO we're reading 'cdev->gadget' and getting NULL // gadget is indeed at offset 0 of struct usb_composite_dev 2A 01 40 F9 ldr x10, [x9] // loading req->buf pointer, which is at offset 0 of struct usb_request 69 02 40 F9 ldr x9, [x19] // x10 is null, crash, appears to be attempt to read cdev->gadget->max_speed 4B 5D 40 B9 ldr w11, [x10, #0x5c] which seems to line up with ncm_do_notify() case NCM_NOTIFY_SPEED code fragment: event->wLength = cpu_to_le16(8); req->length = NCM_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); My analysis of registers and NULL ptr deref crash offset (Unable to handle kernel NULL pointer dereference at virtual address 000000000000005c) heavily suggests that the crash is due to 'cdev->gadget' being NULL when executing: data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); which calls: ncm_bitrate(NULL) which then calls: gadget_is_superspeed(NULL) which reads ((struct usb_gadget *)NULL)->max_speed and hits a panic. AFAICT, if I'm counting right, the offset of max_speed is indeed 0x5C. (remember there's a GKI KABI reservation of 16 bytes in struct work_struct) It's not at all clear to me how this is all supposed to work... but returning 0 seems much better than panic-ing... |
| CVE-2023-52893 | In the Linux kernel, the following vulnerability has been resolved: gsmi: fix null-deref in gsmi_get_variable We can get EFI variables without fetching the attribute, so we must allow for that in gsmi. commit 859748255b43 ("efi: pstore: Omit efivars caching EFI varstore access layer") added a new get_variable call with attr=NULL, which triggers panic in gsmi. |
| CVE-2023-52889 | In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix null pointer deref when receiving skb during sock creation The panic below is observed when receiving ICMP packets with secmark set while an ICMP raw socket is being created. SK_CTX(sk)->label is updated in apparmor_socket_post_create(), but the packet is delivered to the socket before that, causing the null pointer dereference. Drop the packet if label context is not set. BUG: kernel NULL pointer dereference, address: 000000000000004c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 407 Comm: a.out Not tainted 6.4.12-arch1-1 #1 3e6fa2753a2d75925c34ecb78e22e85a65d083df Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/28/2020 RIP: 0010:aa_label_next_confined+0xb/0x40 Code: 00 00 48 89 ef e8 d5 25 0c 00 e9 66 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 89 f0 <8b> 77 4c 39 c6 7e 1f 48 63 d0 48 8d 14 d7 eb 0b 83 c0 01 48 83 c2 RSP: 0018:ffffa92940003b08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000e RDX: ffffa92940003be8 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8b57471e7800 R08: ffff8b574c642400 R09: 0000000000000002 R10: ffffffffbd820eeb R11: ffffffffbeb7ff00 R12: ffff8b574c642400 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000 FS: 00007fb092ea7640(0000) GS:ffff8b577bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000004c CR3: 00000001020f2005 CR4: 00000000007706f0 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? aa_label_next_confined+0xb/0x40 apparmor_secmark_check+0xec/0x330 security_sock_rcv_skb+0x35/0x50 sk_filter_trim_cap+0x47/0x250 sock_queue_rcv_skb_reason+0x20/0x60 raw_rcv+0x13c/0x210 raw_local_deliver+0x1f3/0x250 ip_protocol_deliver_rcu+0x4f/0x2f0 ip_local_deliver_finish+0x76/0xa0 __netif_receive_skb_one_core+0x89/0xa0 netif_receive_skb+0x119/0x170 ? __netdev_alloc_skb+0x3d/0x140 vmxnet3_rq_rx_complete+0xb23/0x1010 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] __napi_poll+0x28/0x1b0 net_rx_action+0x2a4/0x380 __do_softirq+0xd1/0x2c8 __irq_exit_rcu+0xbb/0xf0 common_interrupt+0x86/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 RIP: 0010:apparmor_socket_post_create+0xb/0x200 Code: 08 48 85 ff 75 a1 eb b1 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 <55> 48 89 fd 53 45 85 c0 0f 84 b2 00 00 00 48 8b 1d 80 56 3f 02 48 RSP: 0018:ffffa92940ce7e50 EFLAGS: 00000286 RAX: ffffffffbc756440 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff8b574eaab740 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8b57444cec70 R11: 0000000000000000 R12: 0000000000000003 R13: 0000000000000002 R14: ffff8b574eaab740 R15: ffffffffbd8e4748 ? __pfx_apparmor_socket_post_create+0x10/0x10 security_socket_post_create+0x4b/0x80 __sock_create+0x176/0x1f0 __sys_socket+0x89/0x100 __x64_sys_socket+0x17/0x20 do_syscall_64+0x5d/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc |
| CVE-2023-52888 | In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Only free buffer VA that is not NULL In the MediaTek vcodec driver, while mtk_vcodec_mem_free() is mostly called only when the buffer to free exists, there are some instances that didn't do the check and triggered warnings in practice. We believe those checks were forgotten unintentionally. Add the checks back to fix the warnings. |
| CVE-2023-52887 | In the Linux kernel, the following vulnerability has been resolved: net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new This patch enhances error handling in scenarios with RTS (Request to Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE backtraces with a new error handling method. This provides clearer error messages and allows for the early termination of problematic sessions. Previously, sessions were only released at the end of j1939_xtp_rx_rts(). Potentially this could be reproduced with something like: testj1939 -r vcan0:0x80 & while true; do # send first RTS cansend vcan0 18EC8090#1014000303002301; # send second RTS cansend vcan0 18EC8090#1014000303002301; # send abort cansend vcan0 18EC8090#ff00000000002301; done |
| CVE-2023-52886 | In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix race by not overwriting udev->descriptor in hub_port_init() Syzbot reported an out-of-bounds read in sysfs.c:read_descriptors(): BUG: KASAN: slab-out-of-bounds in read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883 Read of size 8 at addr ffff88801e78b8c8 by task udevd/5011 CPU: 0 PID: 5011 Comm: udevd Not tainted 6.4.0-rc6-syzkaller-00195-g40f71e7cd3c6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351 print_report mm/kasan/report.c:462 [inline] kasan_report+0x11c/0x130 mm/kasan/report.c:572 read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883 ... Allocated by task 758: ... __do_kmalloc_node mm/slab_common.c:966 [inline] __kmalloc+0x5e/0x190 mm/slab_common.c:979 kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:680 [inline] usb_get_configuration+0x1f7/0x5170 drivers/usb/core/config.c:887 usb_enumerate_device drivers/usb/core/hub.c:2407 [inline] usb_new_device+0x12b0/0x19d0 drivers/usb/core/hub.c:2545 As analyzed by Khazhy Kumykov, the cause of this bug is a race between read_descriptors() and hub_port_init(): The first routine uses a field in udev->descriptor, not expecting it to change, while the second overwrites it. Prior to commit 45bf39f8df7f ("USB: core: Don't hold device lock while reading the "descriptors" sysfs file") this race couldn't occur, because the routines were mutually exclusive thanks to the device locking. Removing that locking from read_descriptors() exposed it to the race. The best way to fix the bug is to keep hub_port_init() from changing udev->descriptor once udev has been initialized and registered. Drivers expect the descriptors stored in the kernel to be immutable; we should not undermine this expectation. In fact, this change should have been made long ago. So now hub_port_init() will take an additional argument, specifying a buffer in which to store the device descriptor it reads. (If udev has not yet been initialized, the buffer pointer will be NULL and then hub_port_init() will store the device descriptor in udev as before.) This eliminates the data race responsible for the out-of-bounds read. The changes to hub_port_init() appear more extensive than they really are, because of indentation changes resulting from an attempt to avoid writing to other parts of the usb_device structure after it has been initialized. Similar changes should be made to the code that reads the BOS descriptor, but that can be handled in a separate patch later on. This patch is sufficient to fix the bug found by syzbot. |
| CVE-2023-52885 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix UAF in svc_tcp_listen_data_ready() After the listener svc_sock is freed, and before invoking svc_tcp_accept() for the established child sock, there is a window that the newsock retaining a freed listener svc_sock in sk_user_data which cloning from parent. In the race window, if data is received on the newsock, we will observe use-after-free report in svc_tcp_listen_data_ready(). Reproduce by two tasks: 1. while :; do rpc.nfsd 0 ; rpc.nfsd; done 2. while :; do echo "" | ncat -4 127.0.0.1 2049 ; done KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc] Read of size 8 at addr ffff888139d96228 by task nc/102553 CPU: 7 PID: 102553 Comm: nc Not tainted 6.3.0+ #18 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: <IRQ> dump_stack_lvl+0x33/0x50 print_address_description.constprop.0+0x27/0x310 print_report+0x3e/0x70 kasan_report+0xae/0xe0 svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc] tcp_data_queue+0x9f4/0x20e0 tcp_rcv_established+0x666/0x1f60 tcp_v4_do_rcv+0x51c/0x850 tcp_v4_rcv+0x23fc/0x2e80 ip_protocol_deliver_rcu+0x62/0x300 ip_local_deliver_finish+0x267/0x350 ip_local_deliver+0x18b/0x2d0 ip_rcv+0x2fb/0x370 __netif_receive_skb_one_core+0x166/0x1b0 process_backlog+0x24c/0x5e0 __napi_poll+0xa2/0x500 net_rx_action+0x854/0xc90 __do_softirq+0x1bb/0x5de do_softirq+0xcb/0x100 </IRQ> <TASK> ... </TASK> Allocated by task 102371: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x7b/0x90 svc_setup_socket+0x52/0x4f0 [sunrpc] svc_addsock+0x20d/0x400 [sunrpc] __write_ports_addfd+0x209/0x390 [nfsd] write_ports+0x239/0x2c0 [nfsd] nfsctl_transaction_write+0xac/0x110 [nfsd] vfs_write+0x1c3/0xae0 ksys_write+0xed/0x1c0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 102551: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x50 __kasan_slab_free+0x106/0x190 __kmem_cache_free+0x133/0x270 svc_xprt_free+0x1e2/0x350 [sunrpc] svc_xprt_destroy_all+0x25a/0x440 [sunrpc] nfsd_put+0x125/0x240 [nfsd] nfsd_svc+0x2cb/0x3c0 [nfsd] write_threads+0x1ac/0x2a0 [nfsd] nfsctl_transaction_write+0xac/0x110 [nfsd] vfs_write+0x1c3/0xae0 ksys_write+0xed/0x1c0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Fix the UAF by simply doing nothing in svc_tcp_listen_data_ready() if state != TCP_LISTEN, that will avoid dereferencing svsk for all child socket. |
| CVE-2023-52884 | In the Linux kernel, the following vulnerability has been resolved: Input: cyapa - add missing input core locking to suspend/resume functions Grab input->mutex during suspend/resume functions like it is done in other input drivers. This fixes the following warning during system suspend/resume cycle on Samsung Exynos5250-based Snow Chromebook: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c Modules linked in: ... CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0x1a8/0x1cc __warn from warn_slowpath_fmt+0x18c/0x1b4 warn_slowpath_fmt from input_device_enabled+0x68/0x6c input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c cyapa_reinitialize from cyapa_resume+0x48/0x98 cyapa_resume from dpm_run_callback+0x90/0x298 dpm_run_callback from device_resume+0xb4/0x258 device_resume from async_resume+0x20/0x64 async_resume from async_run_entry_fn+0x40/0x15c async_run_entry_fn from process_scheduled_works+0xbc/0x6a8 process_scheduled_works from worker_thread+0x188/0x454 worker_thread from kthread+0x108/0x140 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf1625fb0 to 0xf1625ff8) ... ---[ end trace 0000000000000000 ]--- ... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c Modules linked in: ... CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0x1a8/0x1cc __warn from warn_slowpath_fmt+0x18c/0x1b4 warn_slowpath_fmt from input_device_enabled+0x68/0x6c input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c cyapa_reinitialize from cyapa_resume+0x48/0x98 cyapa_resume from dpm_run_callback+0x90/0x298 dpm_run_callback from device_resume+0xb4/0x258 device_resume from async_resume+0x20/0x64 async_resume from async_run_entry_fn+0x40/0x15c async_run_entry_fn from process_scheduled_works+0xbc/0x6a8 process_scheduled_works from worker_thread+0x188/0x454 worker_thread from kthread+0x108/0x140 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf1625fb0 to 0xf1625ff8) ... ---[ end trace 0000000000000000 ]--- |
| CVE-2023-52883 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix possible null pointer dereference abo->tbo.resource may be NULL in amdgpu_vm_bo_update. |
| CVE-2023-52882 | In the Linux kernel, the following vulnerability has been resolved: clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change While PLL CPUX clock rate change when CPU is running from it works in vast majority of cases, now and then it causes instability. This leads to system crashes and other undefined behaviour. After a lot of testing (30+ hours) while also doing a lot of frequency switches, we can't observe any instability issues anymore when doing reparenting to stable clock like 24 MHz oscillator. |
| CVE-2023-52881 | In the Linux kernel, the following vulnerability has been resolved: tcp: do not accept ACK of bytes we never sent This patch is based on a detailed report and ideas from Yepeng Pan and Christian Rossow. ACK seq validation is currently following RFC 5961 5.2 guidelines: The ACK value is considered acceptable only if it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT). All incoming segments whose ACK value doesn't satisfy the above condition MUST be discarded and an ACK sent back. It needs to be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a duplicate (SEG.ACK < SND.UNA), it can be ignored. If the ACK acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an ACK, drop the segment, and return". The "ignored" above implies that the processing of the incoming data segment continues, which means the ACK value is treated as acceptable. This mitigation makes the ACK check more stringent since any ACK < SND.UNA wouldn't be accepted, instead only ACKs that are in the range ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through. This can be refined for new (and possibly spoofed) flows, by not accepting ACK for bytes that were never sent. This greatly improves TCP security at a little cost. I added a Fixes: tag to make sure this patch will reach stable trees, even if the 'blamed' patch was adhering to the RFC. tp->bytes_acked was added in linux-4.2 Following packetdrill test (courtesy of Yepeng Pan) shows the issue at hand: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1024) = 0 // ---------------- Handshake ------------------- // // when window scale is set to 14 the window size can be extended to // 65535 * (2^14) = 1073725440. Linux would accept an ACK packet // with ack number in (Server_ISN+1-1073725440. Server_ISN+1) // ,though this ack number acknowledges some data never // sent by the server. +0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14> +0 > S. 0:0(0) ack 1 <...> +0 < . 1:1(0) ack 1 win 65535 +0 accept(3, ..., ...) = 4 // For the established connection, we send an ACK packet, // the ack packet uses ack number 1 - 1073725300 + 2^32, // where 2^32 is used to wrap around. // Note: we used 1073725300 instead of 1073725440 to avoid possible // edge cases. // 1 - 1073725300 + 2^32 = 3221241997 // Oops, old kernels happily accept this packet. +0 < . 1:1001(1000) ack 3221241997 win 65535 // After the kernel fix the following will be replaced by a challenge ACK, // and prior malicious frame would be dropped. +0 > . 1:1(0) ack 1001 |
| CVE-2023-52880 | In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: require CAP_NET_ADMIN to attach N_GSM0710 ldisc Any unprivileged user can attach N_GSM0710 ldisc, but it requires CAP_NET_ADMIN to create a GSM network anyway. Require initial namespace CAP_NET_ADMIN to do that. |
| CVE-2023-52879 | In the Linux kernel, the following vulnerability has been resolved: tracing: Have trace_event_file have ref counters The following can crash the kernel: # cd /sys/kernel/tracing # echo 'p:sched schedule' > kprobe_events # exec 5>>events/kprobes/sched/enable # > kprobe_events # exec 5>&- The above commands: 1. Change directory to the tracefs directory 2. Create a kprobe event (doesn't matter what one) 3. Open bash file descriptor 5 on the enable file of the kprobe event 4. Delete the kprobe event (removes the files too) 5. Close the bash file descriptor 5 The above causes a crash! BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:tracing_release_file_tr+0xc/0x50 What happens here is that the kprobe event creates a trace_event_file "file" descriptor that represents the file in tracefs to the event. It maintains state of the event (is it enabled for the given instance?). Opening the "enable" file gets a reference to the event "file" descriptor via the open file descriptor. When the kprobe event is deleted, the file is also deleted from the tracefs system which also frees the event "file" descriptor. But as the tracefs file is still opened by user space, it will not be totally removed until the final dput() is called on it. But this is not true with the event "file" descriptor that is already freed. If the user does a write to or simply closes the file descriptor it will reference the event "file" descriptor that was just freed, causing a use-after-free bug. To solve this, add a ref count to the event "file" descriptor as well as a new flag called "FREED". The "file" will not be freed until the last reference is released. But the FREE flag will be set when the event is removed to prevent any more modifications to that event from happening, even if there's still a reference to the event "file" descriptor. |
| CVE-2023-52878 | In the Linux kernel, the following vulnerability has been resolved: can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds If the "struct can_priv::echoo_skb" is accessed out of bounds, this would cause a kernel crash. Instead, issue a meaningful warning message and return with an error. |
| CVE-2023-52877 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() It is possible that typec_register_partner() returns ERR_PTR on failure. When port->partner is an error, a NULL pointer dereference may occur as shown below. [91222.095236][ T319] typec port0: failed to register partner (-17) ... [91225.061491][ T319] Unable to handle kernel NULL pointer dereference at virtual address 000000000000039f [91225.274642][ T319] pc : tcpm_pd_data_request+0x310/0x13fc [91225.274646][ T319] lr : tcpm_pd_data_request+0x298/0x13fc [91225.308067][ T319] Call trace: [91225.308070][ T319] tcpm_pd_data_request+0x310/0x13fc [91225.308073][ T319] tcpm_pd_rx_handler+0x100/0x9e8 [91225.355900][ T319] kthread_worker_fn+0x178/0x58c [91225.355902][ T319] kthread+0x150/0x200 [91225.355905][ T319] ret_from_fork+0x10/0x30 Add a check for port->partner to avoid dereferencing a NULL pointer. |
| CVE-2023-52876 | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt7629-eth: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference. |
| CVE-2023-52875 | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference. |
| CVE-2023-52874 | In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Zero out the missing RSI in TDX_HYPERCALL macro In the TDX_HYPERCALL asm, after the TDCALL instruction returns from the untrusted VMM, the registers that the TDX guest shares to the VMM need to be cleared to avoid speculative execution of VMM-provided values. RSI is specified in the bitmap of those registers, but it is missing when zeroing out those registers in the current TDX_HYPERCALL. It was there when it was originally added in commit 752d13305c78 ("x86/tdx: Expand __tdx_hypercall() to handle more arguments"), but was later removed in commit 1e70c680375a ("x86/tdx: Do not corrupt frame-pointer in __tdx_hypercall()"), which was correct because %rsi is later restored in the "pop %rsi". However a later commit 7a3a401874be ("x86/tdx: Drop flags from __tdx_hypercall()") removed that "pop %rsi" but forgot to add the "xor %rsi, %rsi" back. Fix by adding it back. |
| CVE-2023-52873 | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference. |
| CVE-2023-52872 | In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: fix race condition in status line change on dead connections gsm_cleanup_mux() cleans up the gsm by closing all DLCIs, stopping all timers, removing the virtual tty devices and clearing the data queues. This procedure, however, may cause subsequent changes of the virtual modem status lines of a DLCI. More data is being added the outgoing data queue and the deleted kick timer is restarted to handle this. At this point many resources have already been removed by the cleanup procedure. Thus, a kernel panic occurs. Fix this by proving in gsm_modem_update() that the cleanup procedure has not been started and the mux is still alive. Note that writing to a virtual tty is already protected by checks against the DLCI specific connection state. |
| CVE-2023-52871 | In the Linux kernel, the following vulnerability has been resolved: soc: qcom: llcc: Handle a second device without data corruption Usually there is only one llcc device. But if there were a second, even a failed probe call would modify the global drv_data pointer. So check if drv_data is valid before overwriting it. |
| CVE-2023-52870 | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6765: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference. |
| CVE-2023-52869 | In the Linux kernel, the following vulnerability has been resolved: pstore/platform: Add check for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. |
| CVE-2023-52868 | In the Linux kernel, the following vulnerability has been resolved: thermal: core: prevent potential string overflow The dev->id value comes from ida_alloc() so it's a number between zero and INT_MAX. If it's too high then these sprintf()s will overflow. |
| CVE-2023-52867 | In the Linux kernel, the following vulnerability has been resolved: drm/radeon: possible buffer overflow Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is checked after access. |
| CVE-2023-52866 | In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: Fix user-memory-access bug in uclogic_params_ugee_v2_init_event_hooks() When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and then the below user-memory-access bug occurs. In hid_test_uclogic_params_cleanup_event_hooks(),it call uclogic_params_ugee_v2_init_event_hooks() with the first arg=NULL, so when it calls uclogic_params_ugee_v2_has_battery(), the hid_get_drvdata() will access hdev->dev with hdev=NULL, which will cause below user-memory-access. So add a fake_device with quirks member and call hid_set_drvdata() to assign hdev->dev->driver_data which avoids the null-ptr-def bug for drvdata->quirks in uclogic_params_ugee_v2_has_battery(). After applying this patch, the below user-memory-access bug never occurs. general protection fault, probably for non-canonical address 0xdffffc0000000329: 0000 [#1] PREEMPT SMP KASAN KASAN: probably user-memory-access in range [0x0000000000001948-0x000000000000194f] CPU: 5 PID: 2189 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6 DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 ? sched_clock_cpu+0x69/0x550 ? uclogic_parse_ugee_v2_desc_gen_params+0x70/0x70 ? load_balance+0x2950/0x2950 ? rcu_trc_cmpxchg_need_qs+0x67/0xa0 hid_test_uclogic_params_cleanup_event_hooks+0x9e/0x1a0 ? uclogic_params_ugee_v2_init_event_hooks+0x600/0x600 ? __switch_to+0x5cf/0xe60 ? migrate_enable+0x260/0x260 ? __kthread_parkme+0x83/0x150 ? kunit_try_run_case_cleanup+0xe0/0xe0 kunit_generic_run_threadfn_adapter+0x4a/0x90 ? kunit_try_catch_throw+0x80/0x80 kthread+0x2b5/0x380 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ---truncated--- |
| CVE-2023-52865 | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference. |
| CVE-2023-52864 | In the Linux kernel, the following vulnerability has been resolved: platform/x86: wmi: Fix opening of char device Since commit fa1f68db6ca7 ("drivers: misc: pass miscdevice pointer via file private data"), the miscdevice stores a pointer to itself inside filp->private_data, which means that private_data will not be NULL when wmi_char_open() is called. This might cause memory corruption should wmi_char_open() be unable to find its driver, something which can happen when the associated WMI device is deleted in wmi_free_devices(). Fix the problem by using the miscdevice pointer to retrieve the WMI device data associated with a char device using container_of(). This also avoids wmi_char_open() picking a wrong WMI device bound to a driver with the same name as the original driver. |
| CVE-2023-52863 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (axi-fan-control) Fix possible NULL pointer dereference axi_fan_control_irq_handler(), dependent on the private axi_fan_control_data structure, might be called before the hwmon device is registered. That will cause an "Unable to handle kernel NULL pointer dereference" error. |
| CVE-2023-52862 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null pointer dereference in error message This patch fixes a null pointer dereference in the error message that is printed when the Display Core (DC) fails to initialize. The original message includes the DC version number, which is undefined if the DC is not initialized. |
| CVE-2023-52861 | In the Linux kernel, the following vulnerability has been resolved: drm: bridge: it66121: Fix invalid connector dereference Fix the NULL pointer dereference when no monitor is connected, and the sound card is opened from userspace. Instead return an empty buffer (of zeroes) as the EDID information to the sound framework if there is no connector attached. |
| CVE-2023-52860 | In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process When tearing down a 'hisi_hns3' PMU, we mistakenly run the CPU hotplug callbacks after the device has been unregistered, leading to fireworks when we try to execute empty function callbacks within the driver: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | CPU: 0 PID: 15 Comm: cpuhp/0 Tainted: G W O 5.12.0-rc4+ #1 | Hardware name: , BIOS KpxxxFPGA 1P B600 V143 04/22/2021 | pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) | pc : perf_pmu_migrate_context+0x98/0x38c | lr : perf_pmu_migrate_context+0x94/0x38c | | Call trace: | perf_pmu_migrate_context+0x98/0x38c | hisi_hns3_pmu_offline_cpu+0x104/0x12c [hisi_hns3_pmu] Use cpuhp_state_remove_instance_nocalls() instead of cpuhp_state_remove_instance() so that the notifiers don't execute after the PMU device has been unregistered. [will: Rewrote commit message] |
| CVE-2023-52859 | In the Linux kernel, the following vulnerability has been resolved: perf: hisi: Fix use-after-free when register pmu fails When we fail to register the uncore pmu, the pmu context may not been allocated. The error handing will call cpuhp_state_remove_instance() to call uncore pmu offline callback, which migrate the pmu context. Since that's liable to lead to some kind of use-after-free. Use cpuhp_state_remove_instance_nocalls() instead of cpuhp_state_remove_instance() so that the notifiers don't execute after the PMU device has been failed to register. |
| CVE-2023-52858 | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt7629: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference. |
| CVE-2023-52857 | In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix coverity issue with unintentional integer overflow 1. Instead of multiplying 2 variable of different types. Change to assign a value of one variable and then multiply the other variable. 2. Add a int variable for multiplier calculation instead of calculating different types multiplier with dma_addr_t variable directly. |
| CVE-2023-52856 | In the Linux kernel, the following vulnerability has been resolved: drm/bridge: lt8912b: Fix crash on bridge detach The lt8912b driver, in its bridge detach function, calls drm_connector_unregister() and drm_connector_cleanup(). drm_connector_unregister() should be called only for connectors explicitly registered with drm_connector_register(), which is not the case in lt8912b. The driver's drm_connector_funcs.destroy hook is set to drm_connector_cleanup(). Thus the driver should not call either drm_connector_unregister() nor drm_connector_cleanup() in its lt8912_bridge_detach(), as they cause a crash on bridge detach: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000000858f3000 [0000000000000000] pgd=0800000085918003, p4d=0800000085918003, pud=0800000085431003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Modules linked in: tidss(-) display_connector lontium_lt8912b tc358768 panel_lvds panel_simple drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks CPU: 3 PID: 462 Comm: rmmod Tainted: G W 6.5.0-rc2+ #2 Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_connector_cleanup+0x78/0x2d4 [drm] lr : lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] sp : ffff800082ed3a90 x29: ffff800082ed3a90 x28: ffff0000040c1940 x27: 0000000000000000 x26: 0000000000000000 x25: dead000000000122 x24: dead000000000122 x23: dead000000000100 x22: ffff000003fb6388 x21: 0000000000000000 x20: 0000000000000000 x19: ffff000003fb6260 x18: fffffffffffe56e8 x17: 0000000000000000 x16: 0010000000000000 x15: 0000000000000038 x14: 0000000000000000 x13: ffff800081914b48 x12: 000000000000040e x11: 000000000000015a x10: ffff80008196ebb8 x9 : ffff800081914b48 x8 : 00000000ffffefff x7 : ffff0000040c1940 x6 : ffff80007aa649d0 x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffff80008159e008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: drm_connector_cleanup+0x78/0x2d4 [drm] lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] drm_bridge_detach+0x44/0x84 [drm] drm_encoder_cleanup+0x40/0xb8 [drm] drmm_encoder_alloc_release+0x1c/0x30 [drm] drm_managed_release+0xac/0x148 [drm] drm_dev_put.part.0+0x88/0xb8 [drm] devm_drm_dev_init_release+0x14/0x24 [drm] devm_action_release+0x14/0x20 release_nodes+0x5c/0x90 devres_release_all+0x8c/0xe0 device_unbind_cleanup+0x18/0x68 device_release_driver_internal+0x208/0x23c driver_detach+0x4c/0x94 bus_remove_driver+0x70/0xf4 driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 tidss_platform_driver_exit+0x18/0xb2c [tidss] __arm64_sys_delete_module+0x1a0/0x2b4 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x60/0x10c do_el0_svc_compat+0x1c/0x40 el0_svc_compat+0x40/0xac el0t_32_sync_handler+0xb0/0x138 el0t_32_sync+0x194/0x198 Code: 9104a276 f2fbd5b7 aa0203e1 91008af8 (f85c0420) |
| CVE-2023-52855 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix possible NULL pointer dereference caused by driver concurrency In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue(): spin_lock_irqsave(&hsotg->lock, flags); ... if (!urb->hcpriv) { dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); goto out; } rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv ... out: spin_unlock_irqrestore(&hsotg->lock, flags); When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are concurrently executed, the NULL check of "urb->hcpriv" can be executed before "urb->hcpriv = NULL". After urb->hcpriv is NULL, it can be used in the function call to dwc2_hcd_urb_dequeue(), which can cause a NULL pointer dereference. This possible bug is found by an experimental static analysis tool developed by myself. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. The above possible bug is reported, when my tool analyzes the source code of Linux 6.5. To fix this possible bug, "urb->hcpriv = NULL" should be executed with holding the lock "hsotg->lock". After using this patch, my tool never reports the possible bug, with the kernelconfiguration allyesconfig for x86_64. Because I have no associated hardware, I cannot test the patch in runtime testing, and just verify it according to the code logic. |
| CVE-2023-52854 | In the Linux kernel, the following vulnerability has been resolved: padata: Fix refcnt handling in padata_free_shell() In a high-load arm64 environment, the pcrypt_aead01 test in LTP can lead to system UAF (Use-After-Free) issues. Due to the lengthy analysis of the pcrypt_aead01 function call, I'll describe the problem scenario using a simplified model: Suppose there's a user of padata named `user_function` that adheres to the padata requirement of calling `padata_free_shell` after `serial()` has been invoked, as demonstrated in the following code: ```c struct request { struct padata_priv padata; struct completion *done; }; void parallel(struct padata_priv *padata) { do_something(); } void serial(struct padata_priv *padata) { struct request *request = container_of(padata, struct request, padata); complete(request->done); } void user_function() { DECLARE_COMPLETION(done) padata->parallel = parallel; padata->serial = serial; padata_do_parallel(); wait_for_completion(&done); padata_free_shell(); } ``` In the corresponding padata.c file, there's the following code: ```c static void padata_serial_worker(struct work_struct *serial_work) { ... cnt = 0; while (!list_empty(&local_list)) { ... padata->serial(padata); cnt++; } local_bh_enable(); if (refcount_sub_and_test(cnt, &pd->refcnt)) padata_free_pd(pd); } ``` Because of the high system load and the accumulation of unexecuted softirq at this moment, `local_bh_enable()` in padata takes longer to execute than usual. Subsequently, when accessing `pd->refcnt`, `pd` has already been released by `padata_free_shell()`, resulting in a UAF issue with `pd->refcnt`. The fix is straightforward: add `refcount_dec_and_test` before calling `padata_free_pd` in `padata_free_shell`. |
| CVE-2023-52853 | In the Linux kernel, the following vulnerability has been resolved: hid: cp2112: Fix duplicate workqueue initialization Previously the cp2112 driver called INIT_DELAYED_WORK within cp2112_gpio_irq_startup, resulting in duplicate initilizations of the workqueue on subsequent IRQ startups following an initial request. This resulted in a warning in set_work_data in workqueue.c, as well as a rare NULL dereference within process_one_work in workqueue.c. Initialize the workqueue within _probe instead. |
| CVE-2023-52852 | In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix to avoid use-after-free on dic Call trace: __memcpy+0x128/0x250 f2fs_read_multi_pages+0x940/0xf7c f2fs_mpage_readpages+0x5a8/0x624 f2fs_readahead+0x5c/0x110 page_cache_ra_unbounded+0x1b8/0x590 do_sync_mmap_readahead+0x1dc/0x2e4 filemap_fault+0x254/0xa8c f2fs_filemap_fault+0x2c/0x104 __do_fault+0x7c/0x238 do_handle_mm_fault+0x11bc/0x2d14 do_mem_abort+0x3a8/0x1004 el0_da+0x3c/0xa0 el0t_64_sync_handler+0xc4/0xec el0t_64_sync+0x1b4/0x1b8 In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if we hit cached page in compress_inode's cache, dic may be released, it needs break the loop rather than continuing it, in order to avoid accessing invalid dic pointer. |
| CVE-2023-52851 | In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF In the unlikely event that workqueue allocation fails and returns NULL in mlx5_mkey_cache_init(), delete the call to mlx5r_umr_resource_cleanup() (which frees the QP) in mlx5_ib_stage_post_ib_reg_umr_init(). This will avoid attempted double free of the same QP when __mlx5_ib_add() does its cleanup. Resolves a splat: Syzkaller reported a UAF in ib_destroy_qp_user workqueue: Failed to create a rescuer kthread for wq "mkey_cache": -EINTR infiniband mlx5_0: mlx5_mkey_cache_init:981:(pid 1642): failed to create work queue infiniband mlx5_0: mlx5_ib_stage_post_ib_reg_umr_init:4075:(pid 1642): mr cache init failed -12 ================================================================== BUG: KASAN: slab-use-after-free in ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2073) Read of size 8 at addr ffff88810da310a8 by task repro_upstream/1642 Call Trace: <TASK> kasan_report (mm/kasan/report.c:590) ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2073) mlx5r_umr_resource_cleanup (drivers/infiniband/hw/mlx5/umr.c:198) __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4178) mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402) ... </TASK> Allocated by task 1642: __kmalloc (./include/linux/kasan.h:198 mm/slab_common.c:1026 mm/slab_common.c:1039) create_qp (./include/linux/slab.h:603 ./include/linux/slab.h:720 ./include/rdma/ib_verbs.h:2795 drivers/infiniband/core/verbs.c:1209) ib_create_qp_kernel (drivers/infiniband/core/verbs.c:1347) mlx5r_umr_resource_init (drivers/infiniband/hw/mlx5/umr.c:164) mlx5_ib_stage_post_ib_reg_umr_init (drivers/infiniband/hw/mlx5/main.c:4070) __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4168) mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402) ... Freed by task 1642: __kmem_cache_free (mm/slub.c:1826 mm/slub.c:3809 mm/slub.c:3822) ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2112) mlx5r_umr_resource_cleanup (drivers/infiniband/hw/mlx5/umr.c:198) mlx5_ib_stage_post_ib_reg_umr_init (drivers/infiniband/hw/mlx5/main.c:4076 drivers/infiniband/hw/mlx5/main.c:4065) __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4168) mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402) ... |
| CVE-2023-52850 | In the Linux kernel, the following vulnerability has been resolved: media: hantro: Check whether reset op is defined before use The i.MX8MM/N/P does not define the .reset op since reset of the VPU is done by genpd. Check whether the .reset op is defined before calling it to avoid NULL pointer dereference. Note that the Fixes tag is set to the commit which removed the reset op from i.MX8M Hantro G2 implementation, this is because before this commit all the implementations did define the .reset op. |
| CVE-2023-52849 | In the Linux kernel, the following vulnerability has been resolved: cxl/mem: Fix shutdown order Ira reports that removing cxl_mock_mem causes a crash with the following trace: BUG: kernel NULL pointer dereference, address: 0000000000000044 [..] RIP: 0010:cxl_region_decode_reset+0x7f/0x180 [cxl_core] [..] Call Trace: <TASK> cxl_region_detach+0xe8/0x210 [cxl_core] cxl_decoder_kill_region+0x27/0x40 [cxl_core] cxld_unregister+0x29/0x40 [cxl_core] devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1d2/0x210 bus_remove_device+0xd7/0x150 device_del+0x155/0x3e0 device_unregister+0x13/0x60 devm_release_action+0x4d/0x90 ? __pfx_unregister_port+0x10/0x10 [cxl_core] delete_endpoint+0x121/0x130 [cxl_core] devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1d2/0x210 bus_remove_device+0xd7/0x150 device_del+0x155/0x3e0 ? lock_release+0x142/0x290 cdev_device_del+0x15/0x50 cxl_memdev_unregister+0x54/0x70 [cxl_core] This crash is due to the clearing out the cxl_memdev's driver context (@cxlds) before the subsystem is done with it. This is ultimately due to the region(s), that this memdev is a member, being torn down and expecting to be able to de-reference @cxlds, like here: static int cxl_region_decode_reset(struct cxl_region *cxlr, int count) ... if (cxlds->rcd) goto endpoint_reset; ... Fix it by keeping the driver context valid until memdev-device unregistration, and subsequently the entire stack of related dependencies, unwinds. |
| CVE-2023-52848 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to drop meta_inode's page cache in f2fs_put_super() syzbot reports a kernel bug as below: F2FS-fs (loop1): detect filesystem reference count leak during umount, type: 10, count: 1 kernel BUG at fs/f2fs/super.c:1639! CPU: 0 PID: 15451 Comm: syz-executor.1 Not tainted 6.5.0-syzkaller-09338-ge0152e7481c6 #0 RIP: 0010:f2fs_put_super+0xce1/0xed0 fs/f2fs/super.c:1639 Call Trace: generic_shutdown_super+0x161/0x3c0 fs/super.c:693 kill_block_super+0x3b/0x70 fs/super.c:1646 kill_f2fs_super+0x2b7/0x3d0 fs/f2fs/super.c:4879 deactivate_locked_super+0x9a/0x170 fs/super.c:481 deactivate_super+0xde/0x100 fs/super.c:514 cleanup_mnt+0x222/0x3d0 fs/namespace.c:1254 task_work_run+0x14d/0x240 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x210/0x240 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x60 kernel/entry/common.c:296 do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd In f2fs_put_super(), it tries to do sanity check on dirty and IO reference count of f2fs, once there is any reference count leak, it will trigger panic. The root case is, during f2fs_put_super(), if there is any IO error in f2fs_wait_on_all_pages(), we missed to truncate meta_inode's page cache later, result in panic, fix this case. |
| CVE-2023-52847 | In the Linux kernel, the following vulnerability has been resolved: media: bttv: fix use after free error due to btv->timeout timer There may be some a race condition between timer function bttv_irq_timeout and bttv_remove. The timer is setup in probe and there is no timer_delete operation in remove function. When it hit kfree btv, the function might still be invoked, which will cause use after free bug. This bug is found by static analysis, it may be false positive. Fix it by adding del_timer_sync invoking to the remove function. cpu0 cpu1 bttv_probe ->timer_setup ->bttv_set_dma ->mod_timer; bttv_remove ->kfree(btv); ->bttv_irq_timeout ->USE btv |
| CVE-2023-52846 | In the Linux kernel, the following vulnerability has been resolved: hsr: Prevent use after free in prp_create_tagged_frame() The prp_fill_rct() function can fail. In that situation, it frees the skb and returns NULL. Meanwhile on the success path, it returns the original skb. So it's straight forward to fix bug by using the returned value. |
| CVE-2023-52845 | In the Linux kernel, the following vulnerability has been resolved: tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING syzbot reported the following uninit-value access issue [1]: ===================================================== BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline] BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756 strlen lib/string.c:418 [inline] strstr+0xb8/0x2f0 lib/string.c:756 tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595 genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline] genl_rcv_msg+0x11ec/0x1290 net/netlink/genetlink.c:1066 netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1075 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595 __sys_sendmsg net/socket.c:2624 [inline] __do_sys_sendmsg net/socket.c:2633 [inline] __se_sys_sendmsg net/socket.c:2631 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline] netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595 __sys_sendmsg net/socket.c:2624 [inline] __do_sys_sendmsg net/socket.c:2633 [inline] __se_sys_sendmsg net/socket.c:2631 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd TIPC bearer-related names including link names must be null-terminated strings. If a link name which is not null-terminated is passed through netlink, strstr() and similar functions can cause buffer overrun. This causes the above issue. This patch changes the nla_policy for bearer-related names from NLA_STRING to NLA_NUL_STRING. This resolves the issue by ensuring that only null-terminated strings are accepted as bearer-related names. syzbot reported similar uninit-value issue related to bearer names [2]. The root cause of this issue is that a non-null-terminated bearer name was passed. This patch also resolved this issue. |
| CVE-2023-52844 | In the Linux kernel, the following vulnerability has been resolved: media: vidtv: psi: Add check for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. |
| CVE-2023-52843 | In the Linux kernel, the following vulnerability has been resolved: llc: verify mac len before reading mac header LLC reads the mac header with eth_hdr without verifying that the skb has an Ethernet header. Syzbot was able to enter llc_rcv on a tun device. Tun can insert packets without mac len and with user configurable skb->protocol (passing a tun_pi header when not configuring IFF_NO_PI). BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111 llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111 llc_rcv+0xc5d/0x14a0 net/llc/llc_input.c:218 __netif_receive_skb_one_core net/core/dev.c:5523 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637 netif_receive_skb_internal net/core/dev.c:5723 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5782 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x54c5/0x69c0 drivers/net/tun.c:2002 Add a mac_len test before all three eth_hdr(skb) calls under net/llc. There are further uses in include/net/llc_pdu.h. All these are protected by a test skb->protocol == ETH_P_802_2. Which does not protect against this tun scenario. But the mac_len test added in this patch in llc_fixup_skb will indirectly protect those too. That is called from llc_rcv before any other LLC code. It is tempting to just add a blanket mac_len check in llc_rcv, but not sure whether that could break valid LLC paths that do not assume an Ethernet header. 802.2 LLC may be used on top of non-802.3 protocols in principle. The below referenced commit shows that used to, on top of Token Ring. At least one of the three eth_hdr uses goes back to before the start of git history. But the one that syzbot exercises is introduced in this commit. That commit is old enough (2008), that effectively all stable kernels should receive this. |
| CVE-2023-52842 | In the Linux kernel, the following vulnerability has been resolved: virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt() KMSAN reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was stored to memory at: virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline] virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was created at: slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline] virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58 virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline] virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: vsock-loopback vsock_loopback_work ===================================================== The following simple reproducer can cause the issue described above: int main(void) { int sock; struct sockaddr_vm addr = { .svm_family = AF_VSOCK, .svm_cid = VMADDR_CID_ANY, .svm_port = 1234, }; sock = socket(AF_VSOCK, SOCK_STREAM, 0); connect(sock, (struct sockaddr *)&addr, sizeof(addr)); return 0; } This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the `struct virtio_vsock_hdr` are not initialized when a new skb is allocated in `virtio_transport_init_hdr()`. This patch resolves the issue by initializing these fields during allocation. |
| CVE-2023-52841 | In the Linux kernel, the following vulnerability has been resolved: media: vidtv: mux: Add check and kfree for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. Moreover, use kfree() in the later error handling in order to avoid memory leak. |
| CVE-2023-52840 | In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix use after free in rmi_unregister_function() The put_device() calls rmi_release_function() which frees "fn" so the dereference on the next line "fn->num_of_irqs" is a use after free. Move the put_device() to the end to fix this. |
| CVE-2023-52839 | In the Linux kernel, the following vulnerability has been resolved: drivers: perf: Do not broadcast to other cpus when starting a counter This command: $ perf record -e cycles:k -e instructions:k -c 10000 -m 64M dd if=/dev/zero of=/dev/null count=1000 gives rise to this kernel warning: [ 444.364395] WARNING: CPU: 0 PID: 104 at kernel/smp.c:775 smp_call_function_many_cond+0x42c/0x436 [ 444.364515] Modules linked in: [ 444.364657] CPU: 0 PID: 104 Comm: perf-exec Not tainted 6.6.0-rc6-00051-g391df82e8ec3-dirty #73 [ 444.364771] Hardware name: riscv-virtio,qemu (DT) [ 444.364868] epc : smp_call_function_many_cond+0x42c/0x436 [ 444.364917] ra : on_each_cpu_cond_mask+0x20/0x32 [ 444.364948] epc : ffffffff8009f9e0 ra : ffffffff8009fa5a sp : ff20000000003800 [ 444.364966] gp : ffffffff81500aa0 tp : ff60000002b83000 t0 : ff200000000038c0 [ 444.364982] t1 : ffffffff815021f0 t2 : 000000000000001f s0 : ff200000000038b0 [ 444.364998] s1 : ff60000002c54d98 a0 : ff60000002a73940 a1 : 0000000000000000 [ 444.365013] a2 : 0000000000000000 a3 : 0000000000000003 a4 : 0000000000000100 [ 444.365029] a5 : 0000000000010100 a6 : 0000000000f00000 a7 : 0000000000000000 [ 444.365044] s2 : 0000000000000000 s3 : ffffffffffffffff s4 : ff60000002c54d98 [ 444.365060] s5 : ffffffff81539610 s6 : ffffffff80c20c48 s7 : 0000000000000000 [ 444.365075] s8 : 0000000000000000 s9 : 0000000000000001 s10: 0000000000000001 [ 444.365090] s11: ffffffff80099394 t3 : 0000000000000003 t4 : 00000000eac0c6e6 [ 444.365104] t5 : 0000000400000000 t6 : ff60000002e010d0 [ 444.365120] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 444.365226] [<ffffffff8009f9e0>] smp_call_function_many_cond+0x42c/0x436 [ 444.365295] [<ffffffff8009fa5a>] on_each_cpu_cond_mask+0x20/0x32 [ 444.365311] [<ffffffff806e90dc>] pmu_sbi_ctr_start+0x7a/0xaa [ 444.365327] [<ffffffff806e880c>] riscv_pmu_start+0x48/0x66 [ 444.365339] [<ffffffff8012111a>] perf_adjust_freq_unthr_context+0x196/0x1ac [ 444.365356] [<ffffffff801237aa>] perf_event_task_tick+0x78/0x8c [ 444.365368] [<ffffffff8003faf4>] scheduler_tick+0xe6/0x25e [ 444.365383] [<ffffffff8008a042>] update_process_times+0x80/0x96 [ 444.365398] [<ffffffff800991ec>] tick_sched_handle+0x26/0x52 [ 444.365410] [<ffffffff800993e4>] tick_sched_timer+0x50/0x98 [ 444.365422] [<ffffffff8008a6aa>] __hrtimer_run_queues+0x126/0x18a [ 444.365433] [<ffffffff8008b350>] hrtimer_interrupt+0xce/0x1da [ 444.365444] [<ffffffff806cdc60>] riscv_timer_interrupt+0x30/0x3a [ 444.365457] [<ffffffff8006afa6>] handle_percpu_devid_irq+0x80/0x114 [ 444.365470] [<ffffffff80065b82>] generic_handle_domain_irq+0x1c/0x2a [ 444.365483] [<ffffffff8045faec>] riscv_intc_irq+0x2e/0x46 [ 444.365497] [<ffffffff808a9c62>] handle_riscv_irq+0x4a/0x74 [ 444.365521] [<ffffffff808aa760>] do_irq+0x7c/0x7e [ 444.365796] ---[ end trace 0000000000000000 ]--- That's because the fix in commit 3fec323339a4 ("drivers: perf: Fix panic in riscv SBI mmap support") was wrong since there is no need to broadcast to other cpus when starting a counter, that's only needed in mmap when the counters could have already been started on other cpus, so simply remove this broadcast. |
| CVE-2023-52838 | In the Linux kernel, the following vulnerability has been resolved: fbdev: imsttfb: fix a resource leak in probe I've re-written the error handling but the bug is that if init_imstt() fails we need to call iounmap(par->cmap_regs). |
| CVE-2023-52837 | In the Linux kernel, the following vulnerability has been resolved: nbd: fix uaf in nbd_open Commit 4af5f2e03013 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk") cleans up disk by blk_cleanup_disk() and it won't set disk->private_data as NULL as before. UAF may be triggered in nbd_open() if someone tries to open nbd device right after nbd_put() since nbd has been free in nbd_dev_remove(). Fix this by implementing ->free_disk and free private data in it. |
| CVE-2023-52836 | In the Linux kernel, the following vulnerability has been resolved: locking/ww_mutex/test: Fix potential workqueue corruption In some cases running with the test-ww_mutex code, I was seeing odd behavior where sometimes it seemed flush_workqueue was returning before all the work threads were finished. Often this would cause strange crashes as the mutexes would be freed while they were being used. Looking at the code, there is a lifetime problem as the controlling thread that spawns the work allocates the "struct stress" structures that are passed to the workqueue threads. Then when the workqueue threads are finished, they free the stress struct that was passed to them. Unfortunately the workqueue work_struct node is in the stress struct. Which means the work_struct is freed before the work thread returns and while flush_workqueue is waiting. It seems like a better idea to have the controlling thread both allocate and free the stress structures, so that we can be sure we don't corrupt the workqueue by freeing the structure prematurely. So this patch reworks the test to do so, and with this change I no longer see the early flush_workqueue returns. |
| CVE-2023-52835 | In the Linux kernel, the following vulnerability has been resolved: perf/core: Bail out early if the request AUX area is out of bound When perf-record with a large AUX area, e.g 4GB, it fails with: #perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1 failed to mmap with 12 (Cannot allocate memory) and it reveals a WARNING with __alloc_pages(): ------------[ cut here ]------------ WARNING: CPU: 44 PID: 17573 at mm/page_alloc.c:5568 __alloc_pages+0x1ec/0x248 Call trace: __alloc_pages+0x1ec/0x248 __kmalloc_large_node+0xc0/0x1f8 __kmalloc_node+0x134/0x1e8 rb_alloc_aux+0xe0/0x298 perf_mmap+0x440/0x660 mmap_region+0x308/0x8a8 do_mmap+0x3c0/0x528 vm_mmap_pgoff+0xf4/0x1b8 ksys_mmap_pgoff+0x18c/0x218 __arm64_sys_mmap+0x38/0x58 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x58/0x188 do_el0_svc+0x34/0x50 el0_svc+0x34/0x108 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a4/0x1a8 'rb->aux_pages' allocated by kcalloc() is a pointer array which is used to maintains AUX trace pages. The allocated page for this array is physically contiguous (and virtually contiguous) with an order of 0..MAX_ORDER. If the size of pointer array crosses the limitation set by MAX_ORDER, it reveals a WARNING. So bail out early with -ENOMEM if the request AUX area is out of bound, e.g.: #perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1 failed to mmap with 12 (Cannot allocate memory) |
| CVE-2023-52834 | In the Linux kernel, the following vulnerability has been resolved: atl1c: Work around the DMA RX overflow issue This is based on alx driver commit 881d0327db37 ("net: alx: Work around the DMA RX overflow issue"). The alx and atl1c drivers had RX overflow error which was why a custom allocator was created to avoid certain addresses. The simpler workaround then created for alx driver, but not for atl1c due to lack of tester. Instead of using a custom allocator, check the allocated skb address and use skb_reserve() to move away from problematic 0x...fc0 address. Tested on AR8131 on Acer 4540. |
| CVE-2023-52833 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Add date->evt_skb is NULL check fix crash because of null pointers [ 6104.969662] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 6104.969667] #PF: supervisor read access in kernel mode [ 6104.969668] #PF: error_code(0x0000) - not-present page [ 6104.969670] PGD 0 P4D 0 [ 6104.969673] Oops: 0000 [#1] SMP NOPTI [ 6104.969684] RIP: 0010:btusb_mtk_hci_wmt_sync+0x144/0x220 [btusb] [ 6104.969688] RSP: 0018:ffffb8d681533d48 EFLAGS: 00010246 [ 6104.969689] RAX: 0000000000000000 RBX: ffff8ad560bb2000 RCX: 0000000000000006 [ 6104.969691] RDX: 0000000000000000 RSI: ffffb8d681533d08 RDI: 0000000000000000 [ 6104.969692] RBP: ffffb8d681533d70 R08: 0000000000000001 R09: 0000000000000001 [ 6104.969694] R10: 0000000000000001 R11: 00000000fa83b2da R12: ffff8ad461d1d7c0 [ 6104.969695] R13: 0000000000000000 R14: ffff8ad459618c18 R15: ffffb8d681533d90 [ 6104.969697] FS: 00007f5a1cab9d40(0000) GS:ffff8ad578200000(0000) knlGS:00000 [ 6104.969699] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6104.969700] CR2: 00000000000000c8 CR3: 000000018620c001 CR4: 0000000000760ef0 [ 6104.969701] PKRU: 55555554 [ 6104.969702] Call Trace: [ 6104.969708] btusb_mtk_shutdown+0x44/0x80 [btusb] [ 6104.969732] hci_dev_do_close+0x470/0x5c0 [bluetooth] [ 6104.969748] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 6104.969753] rfkill_set_block+0x92/0x160 [ 6104.969755] rfkill_fop_write+0x136/0x1e0 [ 6104.969759] __vfs_write+0x18/0x40 [ 6104.969761] vfs_write+0xdf/0x1c0 [ 6104.969763] ksys_write+0xb1/0xe0 [ 6104.969765] __x64_sys_write+0x1a/0x20 [ 6104.969769] do_syscall_64+0x51/0x180 [ 6104.969771] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 6104.969773] RIP: 0033:0x7f5a21f18fef [ 6104.9] RSP: 002b:00007ffeefe39010 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 6104.969780] RAX: ffffffffffffffda RBX: 000055c10a7560a0 RCX: 00007f5a21f18fef [ 6104.969781] RDX: 0000000000000008 RSI: 00007ffeefe39060 RDI: 0000000000000012 [ 6104.969782] RBP: 00007ffeefe39060 R08: 0000000000000000 R09: 0000000000000017 [ 6104.969784] R10: 00007ffeefe38d97 R11: 0000000000000293 R12: 0000000000000002 [ 6104.969785] R13: 00007ffeefe39220 R14: 00007ffeefe391a0 R15: 000055c10a72acf0 |
| CVE-2023-52832 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't return unset power in ieee80211_get_tx_power() We can get a UBSAN warning if ieee80211_get_tx_power() returns the INT_MIN value mac80211 internally uses for "unset power level". UBSAN: signed-integer-overflow in net/wireless/nl80211.c:3816:5 -2147483648 * 100 cannot be represented in type 'int' CPU: 0 PID: 20433 Comm: insmod Tainted: G WC OE Call Trace: dump_stack+0x74/0x92 ubsan_epilogue+0x9/0x50 handle_overflow+0x8d/0xd0 __ubsan_handle_mul_overflow+0xe/0x10 nl80211_send_iface+0x688/0x6b0 [cfg80211] [...] cfg80211_register_wdev+0x78/0xb0 [cfg80211] cfg80211_netdev_notifier_call+0x200/0x620 [cfg80211] [...] ieee80211_if_add+0x60e/0x8f0 [mac80211] ieee80211_register_hw+0xda5/0x1170 [mac80211] In this case, simply return an error instead, to indicate that no data is available. |
| CVE-2023-52831 | In the Linux kernel, the following vulnerability has been resolved: cpu/hotplug: Don't offline the last non-isolated CPU If a system has isolated CPUs via the "isolcpus=" command line parameter, then an attempt to offline the last housekeeping CPU will result in a WARN_ON() when rebuilding the scheduler domains and a subsequent panic due to and unhandled empty CPU mas in partition_sched_domains_locked(). cpuset_hotplug_workfn() rebuild_sched_domains_locked() ndoms = generate_sched_domains(&doms, &attr); cpumask_and(doms[0], top_cpuset.effective_cpus, housekeeping_cpumask(HK_FLAG_DOMAIN)); Thus results in an empty CPU mask which triggers the warning and then the subsequent crash: WARNING: CPU: 4 PID: 80 at kernel/sched/topology.c:2366 build_sched_domains+0x120c/0x1408 Call trace: build_sched_domains+0x120c/0x1408 partition_sched_domains_locked+0x234/0x880 rebuild_sched_domains_locked+0x37c/0x798 rebuild_sched_domains+0x30/0x58 cpuset_hotplug_workfn+0x2a8/0x930 Unable to handle kernel paging request at virtual address fffe80027ab37080 partition_sched_domains_locked+0x318/0x880 rebuild_sched_domains_locked+0x37c/0x798 Aside of the resulting crash, it does not make any sense to offline the last last housekeeping CPU. Prevent this by masking out the non-housekeeping CPUs when selecting a target CPU for initiating the CPU unplug operation via the work queue. |
| CVE-2023-52829 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix possible out-of-bound write in ath12k_wmi_ext_hal_reg_caps() reg_cap.phy_id is extracted from WMI event and could be an unexpected value in case some errors happen. As a result out-of-bound write may occur to soc->hal_reg_cap. Fix it by validating reg_cap.phy_id before using it. This is found during code review. Compile tested only. |
| CVE-2023-52828 | In the Linux kernel, the following vulnerability has been resolved: bpf: Detect IP == ksym.end as part of BPF program Now that bpf_throw kfunc is the first such call instruction that has noreturn semantics within the verifier, this also kicks in dead code elimination in unprecedented ways. For one, any instruction following a bpf_throw call will never be marked as seen. Moreover, if a callchain ends up throwing, any instructions after the call instruction to the eventually throwing subprog in callers will also never be marked as seen. The tempting way to fix this would be to emit extra 'int3' instructions which bump the jited_len of a program, and ensure that during runtime when a program throws, we can discover its boundaries even if the call instruction to bpf_throw (or to subprogs that always throw) is emitted as the final instruction in the program. An example of such a program would be this: do_something(): ... r0 = 0 exit foo(): r1 = 0 call bpf_throw r0 = 0 exit bar(cond): if r1 != 0 goto pc+2 call do_something exit call foo r0 = 0 // Never seen by verifier exit // main(ctx): r1 = ... call bar r0 = 0 exit Here, if we do end up throwing, the stacktrace would be the following: bpf_throw foo bar main In bar, the final instruction emitted will be the call to foo, as such, the return address will be the subsequent instruction (which the JIT emits as int3 on x86). This will end up lying outside the jited_len of the program, thus, when unwinding, we will fail to discover the return address as belonging to any program and end up in a panic due to the unreliable stack unwinding of BPF programs that we never expect. To remedy this case, make bpf_prog_ksym_find treat IP == ksym.end as part of the BPF program, so that is_bpf_text_address returns true when such a case occurs, and we are able to unwind reliably when the final instruction ends up being a call instruction. |
| CVE-2023-52827 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix possible out-of-bound read in ath12k_htt_pull_ppdu_stats() len is extracted from HTT message and could be an unexpected value in case errors happen, so add validation before using to avoid possible out-of-bound read in the following message iteration and parsing. The same issue also applies to ppdu_info->ppdu_stats.common.num_users, so validate it before using too. These are found during code review. Compile test only. |
| CVE-2023-52826 | In the Linux kernel, the following vulnerability has been resolved: drm/panel/panel-tpo-tpg110: fix a possible null pointer dereference In tpg110_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. |
| CVE-2023-52825 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix a race condition of vram buffer unref in svm code prange->svm_bo unref can happen in both mmu callback and a callback after migrate to system ram. Both are async call in different tasks. Sync svm_bo unref operation to avoid random "use-after-free". |
| CVE-2023-52821 | In the Linux kernel, the following vulnerability has been resolved: drm/panel: fix a possible null pointer dereference In versatile_panel_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. |
| CVE-2023-52819 | In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix UBSAN array-index-out-of-bounds for Polaris and Tonga For pptable structs that use flexible array sizes, use flexible arrays. |
| CVE-2023-52818 | In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix UBSAN array-index-out-of-bounds for SMU7 For pptable structs that use flexible array sizes, use flexible arrays. |
| CVE-2023-52817 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ en ---truncated--- |
| CVE-2023-52816 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix shift out-of-bounds issue [ 567.613292] shift exponent 255 is too large for 64-bit type 'long unsigned int' [ 567.614498] CPU: 5 PID: 238 Comm: kworker/5:1 Tainted: G OE 6.2.0-34-generic #34~22.04.1-Ubuntu [ 567.614502] Hardware name: AMD Splinter/Splinter-RPL, BIOS WS43927N_871 09/25/2023 [ 567.614504] Workqueue: events send_exception_work_handler [amdgpu] [ 567.614748] Call Trace: [ 567.614750] <TASK> [ 567.614753] dump_stack_lvl+0x48/0x70 [ 567.614761] dump_stack+0x10/0x20 [ 567.614763] __ubsan_handle_shift_out_of_bounds+0x156/0x310 [ 567.614769] ? srso_alias_return_thunk+0x5/0x7f [ 567.614773] ? update_sd_lb_stats.constprop.0+0xf2/0x3c0 [ 567.614780] svm_range_split_by_granularity.cold+0x2b/0x34 [amdgpu] [ 567.615047] ? srso_alias_return_thunk+0x5/0x7f [ 567.615052] svm_migrate_to_ram+0x185/0x4d0 [amdgpu] [ 567.615286] do_swap_page+0x7b6/0xa30 [ 567.615291] ? srso_alias_return_thunk+0x5/0x7f [ 567.615294] ? __free_pages+0x119/0x130 [ 567.615299] handle_pte_fault+0x227/0x280 [ 567.615303] __handle_mm_fault+0x3c0/0x720 [ 567.615311] handle_mm_fault+0x119/0x330 [ 567.615314] ? lock_mm_and_find_vma+0x44/0x250 [ 567.615318] do_user_addr_fault+0x1a9/0x640 [ 567.615323] exc_page_fault+0x81/0x1b0 [ 567.615328] asm_exc_page_fault+0x27/0x30 [ 567.615332] RIP: 0010:__get_user_8+0x1c/0x30 |
| CVE-2023-52815 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vkms: fix a possible null pointer dereference In amdgpu_vkms_conn_get_modes(), the return value of drm_cvt_mode() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_cvt_mode(). Add a check to avoid null pointer dereference. |
| CVE-2023-52814 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential null pointer derefernce The amdgpu_ras_get_context may return NULL if device not support ras feature, so add check before using. |
| CVE-2023-52813 | In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Fix hungtask for PADATA_RESET We found a hungtask bug in test_aead_vec_cfg as follows: INFO: task cryptomgr_test:391009 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Call trace: __switch_to+0x98/0xe0 __schedule+0x6c4/0xf40 schedule+0xd8/0x1b4 schedule_timeout+0x474/0x560 wait_for_common+0x368/0x4e0 wait_for_completion+0x20/0x30 wait_for_completion+0x20/0x30 test_aead_vec_cfg+0xab4/0xd50 test_aead+0x144/0x1f0 alg_test_aead+0xd8/0x1e0 alg_test+0x634/0x890 cryptomgr_test+0x40/0x70 kthread+0x1e0/0x220 ret_from_fork+0x10/0x18 Kernel panic - not syncing: hung_task: blocked tasks For padata_do_parallel, when the return err is 0 or -EBUSY, it will call wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal case, aead_request_complete() will be called in pcrypt_aead_serial and the return err is 0 for padata_do_parallel. But, when pinst->flags is PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it won't call aead_request_complete(). Therefore, test_aead_vec_cfg will hung at wait_for_completion(&wait->completion), which will cause hungtask. The problem comes as following: (padata_do_parallel) | rcu_read_lock_bh(); | err = -EINVAL; | (padata_replace) | pinst->flags |= PADATA_RESET; err = -EBUSY | if (pinst->flags & PADATA_RESET) | rcu_read_unlock_bh() | return err In order to resolve the problem, we replace the return err -EBUSY with -EAGAIN, which means parallel_data is changing, and the caller should call it again. v3: remove retry and just change the return err. v2: introduce padata_try_do_parallel() in pcrypt_aead_encrypt and pcrypt_aead_decrypt to solve the hungtask. |
| CVE-2023-52812 | In the Linux kernel, the following vulnerability has been resolved: drm/amd: check num of link levels when update pcie param In SR-IOV environment, the value of pcie_table->num_of_link_levels will be 0, and num_of_levels - 1 will cause array index out of bounds |
| CVE-2023-52811 | In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Remove BUG_ON in the case of an empty event pool In practice the driver should never send more commands than are allocated to a queue's event pool. In the unlikely event that this happens, the code asserts a BUG_ON, and in the case that the kernel is not configured to crash on panic returns a junk event pointer from the empty event list causing things to spiral from there. This BUG_ON is a historical artifact of the ibmvfc driver first being upstreamed, and it is well known now that the use of BUG_ON is bad practice except in the most unrecoverable scenario. There is nothing about this scenario that prevents the driver from recovering and carrying on. Remove the BUG_ON in question from ibmvfc_get_event() and return a NULL pointer in the case of an empty event pool. Update all call sites to ibmvfc_get_event() to check for a NULL pointer and perfrom the appropriate failure or recovery action. |
| CVE-2023-52810 | In the Linux kernel, the following vulnerability has been resolved: fs/jfs: Add check for negative db_l2nbperpage l2nbperpage is log2(number of blks per page), and the minimum legal value should be 0, not negative. In the case of l2nbperpage being negative, an error will occur when subsequently used as shift exponent. Syzbot reported this bug: UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:799:12 shift exponent -16777216 is negative |
| CVE-2023-52809 | In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup() fc_lport_ptp_setup() did not check the return value of fc_rport_create() which can return NULL and would cause a NULL pointer dereference. Address this issue by checking return value of fc_rport_create() and log error message on fc_rport_create() failed. |
| CVE-2023-52808 | In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Set debugfs_dir pointer to NULL after removing debugfs If init debugfs failed during device registration due to memory allocation failure, debugfs_remove_recursive() is called, after which debugfs_dir is not set to NULL. debugfs_remove_recursive() will be called again during device removal. As a result, illegal pointer is accessed. [ 1665.467244] hisi_sas_v3_hw 0000:b4:02.0: failed to init debugfs! ... [ 1669.836708] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 1669.872669] pc : down_write+0x24/0x70 [ 1669.876315] lr : down_write+0x1c/0x70 [ 1669.879961] sp : ffff000036f53a30 [ 1669.883260] x29: ffff000036f53a30 x28: ffffa027c31549f8 [ 1669.888547] x27: ffffa027c3140000 x26: 0000000000000000 [ 1669.893834] x25: ffffa027bf37c270 x24: ffffa027bf37c270 [ 1669.899122] x23: ffff0000095406b8 x22: ffff0000095406a8 [ 1669.904408] x21: 0000000000000000 x20: ffffa027bf37c310 [ 1669.909695] x19: 00000000000000a0 x18: ffff8027dcd86f10 [ 1669.914982] x17: 0000000000000000 x16: 0000000000000000 [ 1669.920268] x15: 0000000000000000 x14: ffffa0274014f870 [ 1669.925555] x13: 0000000000000040 x12: 0000000000000228 [ 1669.930842] x11: 0000000000000020 x10: 0000000000000bb0 [ 1669.936129] x9 : ffff000036f537f0 x8 : ffff80273088ca10 [ 1669.941416] x7 : 000000000000001d x6 : 00000000ffffffff [ 1669.946702] x5 : ffff000008a36310 x4 : ffff80273088be00 [ 1669.951989] x3 : ffff000009513e90 x2 : 0000000000000000 [ 1669.957276] x1 : 00000000000000a0 x0 : ffffffff00000001 [ 1669.962563] Call trace: [ 1669.965000] down_write+0x24/0x70 [ 1669.968301] debugfs_remove_recursive+0x5c/0x1b0 [ 1669.972905] hisi_sas_debugfs_exit+0x24/0x30 [hisi_sas_main] [ 1669.978541] hisi_sas_v3_remove+0x130/0x150 [hisi_sas_v3_hw] [ 1669.984175] pci_device_remove+0x48/0xd8 [ 1669.988082] device_release_driver_internal+0x1b4/0x250 [ 1669.993282] device_release_driver+0x28/0x38 [ 1669.997534] pci_stop_bus_device+0x84/0xb8 [ 1670.001611] pci_stop_and_remove_bus_device_locked+0x24/0x40 [ 1670.007244] remove_store+0xfc/0x140 [ 1670.010802] dev_attr_store+0x44/0x60 [ 1670.014448] sysfs_kf_write+0x58/0x80 [ 1670.018095] kernfs_fop_write+0xe8/0x1f0 [ 1670.022000] __vfs_write+0x60/0x190 [ 1670.025472] vfs_write+0xac/0x1c0 [ 1670.028771] ksys_write+0x6c/0xd8 [ 1670.032071] __arm64_sys_write+0x24/0x30 [ 1670.035977] el0_svc_common+0x78/0x130 [ 1670.039710] el0_svc_handler+0x38/0x78 [ 1670.043442] el0_svc+0x8/0xc To fix this, set debugfs_dir to NULL after debugfs_remove_recursive(). |
| CVE-2023-52807 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix out-of-bounds access may occur when coalesce info is read via debugfs The hns3 driver define an array of string to show the coalesce info, but if the kernel adds a new mode or a new state, out-of-bounds access may occur when coalesce info is read via debugfs, this patch fix the problem. |
| CVE-2023-52806 | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix possible null-ptr-deref when assigning a stream While AudioDSP drivers assign streams exclusively of HOST or LINK type, nothing blocks a user to attempt to assign a COUPLED stream. As supplied substream instance may be a stub, what is the case when code-loading, such scenario ends with null-ptr-deref. |
| CVE-2023-52805 | In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in diAlloc Currently there is not check against the agno of the iag while allocating new inodes to avoid fragmentation problem. Added the check which is required. |
| CVE-2023-52804 | In the Linux kernel, the following vulnerability has been resolved: fs/jfs: Add validity check for db_maxag and db_agpref Both db_maxag and db_agpref are used as the index of the db_agfree array, but there is currently no validity check for db_maxag and db_agpref, which can lead to errors. The following is related bug reported by Syzbot: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20 index 7936 is out of range for type 'atomic_t[128]' Add checking that the values of db_maxag and db_agpref are valid indexes for the db_agfree array. |
| CVE-2023-52803 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix RPC client cleaned up the freed pipefs dentries RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir() workqueue,which takes care about pipefs superblock locking. In some special scenarios, when kernel frees the pipefs sb of the current client and immediately alloctes a new pipefs sb, rpc_remove_pipedir function would misjudge the existence of pipefs sb which is not the one it used to hold. As a result, the rpc_remove_pipedir would clean the released freed pipefs dentries. To fix this issue, rpc_remove_pipedir should check whether the current pipefs sb is consistent with the original pipefs sb. This error can be catched by KASAN: ========================================================= [ 250.497700] BUG: KASAN: slab-use-after-free in dget_parent+0x195/0x200 [ 250.498315] Read of size 4 at addr ffff88800a2ab804 by task kworker/0:18/106503 [ 250.500549] Workqueue: events rpc_free_client_work [ 250.501001] Call Trace: [ 250.502880] kasan_report+0xb6/0xf0 [ 250.503209] ? dget_parent+0x195/0x200 [ 250.503561] dget_parent+0x195/0x200 [ 250.503897] ? __pfx_rpc_clntdir_depopulate+0x10/0x10 [ 250.504384] rpc_rmdir_depopulate+0x1b/0x90 [ 250.504781] rpc_remove_client_dir+0xf5/0x150 [ 250.505195] rpc_free_client_work+0xe4/0x230 [ 250.505598] process_one_work+0x8ee/0x13b0 ... [ 22.039056] Allocated by task 244: [ 22.039390] kasan_save_stack+0x22/0x50 [ 22.039758] kasan_set_track+0x25/0x30 [ 22.040109] __kasan_slab_alloc+0x59/0x70 [ 22.040487] kmem_cache_alloc_lru+0xf0/0x240 [ 22.040889] __d_alloc+0x31/0x8e0 [ 22.041207] d_alloc+0x44/0x1f0 [ 22.041514] __rpc_lookup_create_exclusive+0x11c/0x140 [ 22.041987] rpc_mkdir_populate.constprop.0+0x5f/0x110 [ 22.042459] rpc_create_client_dir+0x34/0x150 [ 22.042874] rpc_setup_pipedir_sb+0x102/0x1c0 [ 22.043284] rpc_client_register+0x136/0x4e0 [ 22.043689] rpc_new_client+0x911/0x1020 [ 22.044057] rpc_create_xprt+0xcb/0x370 [ 22.044417] rpc_create+0x36b/0x6c0 ... [ 22.049524] Freed by task 0: [ 22.049803] kasan_save_stack+0x22/0x50 [ 22.050165] kasan_set_track+0x25/0x30 [ 22.050520] kasan_save_free_info+0x2b/0x50 [ 22.050921] __kasan_slab_free+0x10e/0x1a0 [ 22.051306] kmem_cache_free+0xa5/0x390 [ 22.051667] rcu_core+0x62c/0x1930 [ 22.051995] __do_softirq+0x165/0x52a [ 22.052347] [ 22.052503] Last potentially related work creation: [ 22.052952] kasan_save_stack+0x22/0x50 [ 22.053313] __kasan_record_aux_stack+0x8e/0xa0 [ 22.053739] __call_rcu_common.constprop.0+0x6b/0x8b0 [ 22.054209] dentry_free+0xb2/0x140 [ 22.054540] __dentry_kill+0x3be/0x540 [ 22.054900] shrink_dentry_list+0x199/0x510 [ 22.055293] shrink_dcache_parent+0x190/0x240 [ 22.055703] do_one_tree+0x11/0x40 [ 22.056028] shrink_dcache_for_umount+0x61/0x140 [ 22.056461] generic_shutdown_super+0x70/0x590 [ 22.056879] kill_anon_super+0x3a/0x60 [ 22.057234] rpc_kill_sb+0x121/0x200 |
| CVE-2023-52801 | In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix missing update of domains_itree after splitting iopt_area In iopt_area_split(), if the original iopt_area has filled a domain and is linked to domains_itree, pages_nodes have to be properly reinserted. Otherwise the domains_itree becomes corrupted and we will UAF. |
| CVE-2023-52800 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix htt pktlog locking The ath11k active pdevs are protected by RCU but the htt pktlog handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. |
| CVE-2023-52799 | In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in dbFindLeaf Currently while searching for dmtree_t for sufficient free blocks there is an array out of bounds while getting element in tp->dm_stree. To add the required check for out of bound we first need to determine the type of dmtree. Thus added an extra parameter to dbFindLeaf so that the type of tree can be determined and the required check can be applied. |
| CVE-2023-52798 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix dfs radar event locking The ath11k active pdevs are protected by RCU but the DFS radar event handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. |
| CVE-2023-52797 | In the Linux kernel, the following vulnerability has been resolved: drivers: perf: Check find_first_bit() return value We must check the return value of find_first_bit() before using the return value as an index array since it happens to overflow the array and then panic: [ 107.318430] Kernel BUG [#1] [ 107.319434] CPU: 3 PID: 1238 Comm: kill Tainted: G E 6.6.0-rc6ubuntu-defconfig #2 [ 107.319465] Hardware name: riscv-virtio,qemu (DT) [ 107.319551] epc : pmu_sbi_ovf_handler+0x3a4/0x3ae [ 107.319840] ra : pmu_sbi_ovf_handler+0x52/0x3ae [ 107.319868] epc : ffffffff80a0a77c ra : ffffffff80a0a42a sp : ffffaf83fecda350 [ 107.319884] gp : ffffffff823961a8 tp : ffffaf8083db1dc0 t0 : ffffaf83fecda480 [ 107.319899] t1 : ffffffff80cafe62 t2 : 000000000000ff00 s0 : ffffaf83fecda520 [ 107.319921] s1 : ffffaf83fecda380 a0 : 00000018fca29df0 a1 : ffffffffffffffff [ 107.319936] a2 : 0000000001073734 a3 : 0000000000000004 a4 : 0000000000000000 [ 107.319951] a5 : 0000000000000040 a6 : 000000001d1c8774 a7 : 0000000000504d55 [ 107.319965] s2 : ffffffff82451f10 s3 : ffffffff82724e70 s4 : 000000000000003f [ 107.319980] s5 : 0000000000000011 s6 : ffffaf8083db27c0 s7 : 0000000000000000 [ 107.319995] s8 : 0000000000000001 s9 : 00007fffb45d6558 s10: 00007fffb45d81a0 [ 107.320009] s11: ffffaf7ffff60000 t3 : 0000000000000004 t4 : 0000000000000000 [ 107.320023] t5 : ffffaf7f80000000 t6 : ffffaf8000000000 [ 107.320037] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 107.320081] [<ffffffff80a0a77c>] pmu_sbi_ovf_handler+0x3a4/0x3ae [ 107.320112] [<ffffffff800b42d0>] handle_percpu_devid_irq+0x9e/0x1a0 [ 107.320131] [<ffffffff800ad92c>] generic_handle_domain_irq+0x28/0x36 [ 107.320148] [<ffffffff8065f9f8>] riscv_intc_irq+0x36/0x4e [ 107.320166] [<ffffffff80caf4a0>] handle_riscv_irq+0x54/0x86 [ 107.320189] [<ffffffff80cb0036>] do_irq+0x64/0x96 [ 107.320271] Code: 85a6 855e b097 ff7f 80e7 9220 b709 9002 4501 bbd9 (9002) 6097 [ 107.320585] ---[ end trace 0000000000000000 ]--- [ 107.320704] Kernel panic - not syncing: Fatal exception in interrupt [ 107.320775] SMP: stopping secondary CPUs [ 107.321219] Kernel Offset: 0x0 from 0xffffffff80000000 [ 107.333051] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- |
| CVE-2023-52796 | In the Linux kernel, the following vulnerability has been resolved: ipvlan: add ipvlan_route_v6_outbound() helper Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<f ---truncated--- |
| CVE-2023-52795 | In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: fix use after free in vhost_vdpa_probe() The put_device() calls vhost_vdpa_release_dev() which calls ida_simple_remove() and frees "v". So this call to ida_simple_remove() is a use after free and a double free. |
| CVE-2023-52794 | In the Linux kernel, the following vulnerability has been resolved: thermal: intel: powerclamp: fix mismatch in get function for max_idle KASAN reported this [ 444.853098] BUG: KASAN: global-out-of-bounds in param_get_int+0x77/0x90 [ 444.853111] Read of size 4 at addr ffffffffc16c9220 by task cat/2105 ... [ 444.853442] The buggy address belongs to the variable: [ 444.853443] max_idle+0x0/0xffffffffffffcde0 [intel_powerclamp] There is a mismatch between the param_get_int and the definition of max_idle. Replacing param_get_int with param_get_byte resolves this issue. |
| CVE-2023-52792 | In the Linux kernel, the following vulnerability has been resolved: cxl/region: Do not try to cleanup after cxl_region_setup_targets() fails Commit 5e42bcbc3fef ("cxl/region: decrement ->nr_targets on error in cxl_region_attach()") tried to avoid 'eiw' initialization errors when ->nr_targets exceeded 16, by just decrementing ->nr_targets when cxl_region_setup_targets() failed. Commit 86987c766276 ("cxl/region: Cleanup target list on attach error") extended that cleanup to also clear cxled->pos and p->targets[pos]. The initialization error was incidentally fixed separately by: Commit 8d4285425714 ("cxl/region: Fix port setup uninitialized variable warnings") which was merged a few days after 5e42bcbc3fef. But now the original cleanup when cxl_region_setup_targets() fails prevents endpoint and switch decoder resources from being reused: 1) the cleanup does not set the decoder's region to NULL, which results in future dpa_size_store() calls returning -EBUSY 2) the decoder is not properly freed, which results in future commit errors associated with the upstream switch Now that the initialization errors were fixed separately, the proper cleanup for this case is to just return immediately. Then the resources associated with this target get cleanup up as normal when the failed region is deleted. The ->nr_targets decrement in the error case also helped prevent a p->targets[] array overflow, so add a new check to prevent against that overflow. Tested by trying to create an invalid region for a 2 switch * 2 endpoint topology, and then following up with creating a valid region. |
| CVE-2023-52791 | In the Linux kernel, the following vulnerability has been resolved: i2c: core: Run atomic i2c xfer when !preemptible Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is disabled. However, non-atomic i2c transfers require preemption (e.g. in wait_for_completion() while waiting for the DMA). panic() calls preempt_disable_notrace() before calling emergency_restart(). Therefore, if an i2c device is used for the restart, the xfer should be atomic. This avoids warnings like: [ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0 [ 12.676926] Voluntary context switch within RCU read-side critical section! ... [ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114 [ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70 ... [ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58 [ 13.001050] machine_restart from panic+0x2a8/0x32c Use !preemptible() instead, which is basically the same check as pre-v5.2. |
| CVE-2023-52790 | In the Linux kernel, the following vulnerability has been resolved: swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC Limit the free list length to the size of the IO TLB. Transient pool can be smaller than IO_TLB_SEGSIZE, but the free list is initialized with the assumption that the total number of slots is a multiple of IO_TLB_SEGSIZE. As a result, swiotlb_area_find_slots() may allocate slots past the end of a transient IO TLB buffer. |
| CVE-2023-52789 | In the Linux kernel, the following vulnerability has been resolved: tty: vcc: Add check for kstrdup() in vcc_probe() Add check for the return value of kstrdup() and return the error, if it fails in order to avoid NULL pointer dereference. |
| CVE-2023-52788 | In the Linux kernel, the following vulnerability has been resolved: i915/perf: Fix NULL deref bugs with drm_dbg() calls When i915 perf interface is not available dereferencing it will lead to NULL dereferences. As returning -ENOTSUPP is pretty clear return when perf interface is not available. [tursulin: added stable tag] (cherry picked from commit 36f27350ff745bd228ab04d7845dfbffc177a889) |
| CVE-2023-52787 | In the Linux kernel, the following vulnerability has been resolved: blk-mq: make sure active queue usage is held for bio_integrity_prep() blk_integrity_unregister() can come if queue usage counter isn't held for one bio with integrity prepared, so this request may be completed with calling profile->complete_fn, then kernel panic. Another constraint is that bio_integrity_prep() needs to be called before bio merge. Fix the issue by: - call bio_integrity_prep() with one queue usage counter grabbed reliably - call bio_integrity_prep() before bio merge |
| CVE-2023-52786 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix racy may inline data check in dio write syzbot reports that the following warning from ext4_iomap_begin() triggers as of the commit referenced below: if (WARN_ON_ONCE(ext4_has_inline_data(inode))) return -ERANGE; This occurs during a dio write, which is never expected to encounter an inode with inline data. To enforce this behavior, ext4_dio_write_iter() checks the current inline state of the inode and clears the MAY_INLINE_DATA state flag to either fall back to buffered writes, or enforce that any other writers in progress on the inode are not allowed to create inline data. The problem is that the check for existing inline data and the state flag can span a lock cycle. For example, if the ilock is originally locked shared and subsequently upgraded to exclusive, another writer may have reacquired the lock and created inline data before the dio write task acquires the lock and proceeds. The commit referenced below loosens the lock requirements to allow some forms of unaligned dio writes to occur under shared lock, but AFAICT the inline data check was technically already racy for any dio write that would have involved a lock cycle. Regardless, lift clearing of the state bit to the same lock critical section that checks for preexisting inline data on the inode to close the race. |
| CVE-2023-52785 | In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR If command timeout happens and cq complete IRQ is raised at the same time, ufshcd_mcq_abort clears lprb->cmd and a NULL pointer deref happens in the ISR. Error log: ufshcd_abort: Device abort task at tag 18 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 pc : [0xffffffe27ef867ac] scsi_dma_unmap+0xc/0x44 lr : [0xffffffe27f1b898c] ufshcd_release_scsi_cmd+0x24/0x114 |
| CVE-2023-52784 | In the Linux kernel, the following vulnerability has been resolved: bonding: stop the device in bond_setup_by_slave() Commit 9eed321cde22 ("net: lapbether: only support ethernet devices") has been able to keep syzbot away from net/lapb, until today. In the following splat [1], the issue is that a lapbether device has been created on a bonding device without members. Then adding a non ARPHRD_ETHER member forced the bonding master to change its type. The fix is to make sure we call dev_close() in bond_setup_by_slave() so that the potential linked lapbether devices (or any other devices having assumptions on the physical device) are removed. A similar bug has been addressed in commit 40baec225765 ("bonding: fix panic on non-ARPHRD_ETHER enslave failure") [1] skbuff: skb_under_panic: text:ffff800089508810 len:44 put:40 head:ffff0000c78e7c00 data:ffff0000c78e7bea tail:0x16 end:0x140 dev:bond0 kernel BUG at net/core/skbuff.c:192 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6007 Comm: syz-executor383 Not tainted 6.6.0-rc3-syzkaller-gbf6547d8715b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:188 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 lr : skb_panic net/core/skbuff.c:188 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 sp : ffff800096a06aa0 x29: ffff800096a06ab0 x28: ffff800096a06ba0 x27: dfff800000000000 x26: ffff0000ce9b9b50 x25: 0000000000000016 x24: ffff0000c78e7bea x23: ffff0000c78e7c00 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff800089508810 x18: ffff800096a06100 x17: 0000000000000000 x16: ffff80008a629a3c x15: 0000000000000001 x14: 1fffe00036837a32 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000201 x10: 0000000000000000 x9 : cb50b496c519aa00 x8 : cb50b496c519aa00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff800096a063b8 x4 : ffff80008e280f80 x3 : ffff8000805ad11c x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:188 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 skb_push+0xf0/0x108 net/core/skbuff.c:2446 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1384 dev_hard_header include/linux/netdevice.h:3136 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 __lapb_disconnect_request+0x9c/0x17c net/lapb/lapb_iface.c:326 lapb_device_event+0x288/0x4e0 net/lapb/lapb_iface.c:492 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 lapbeth_device_event+0x2e4/0x958 drivers/net/wan/lapbether.c:466 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 bond_enslave+0x2298/0x30cc drivers/net/bonding/bond_main.c:2332 bond_do_ioctl+0x268/0xc64 drivers/net/bonding/bond_main.c:4539 dev_ifsioc+0x754/0x9ac dev_ioctl+0x4d8/0xd34 net/core/dev_ioctl.c:786 sock_do_ioctl+0x1d4/0x2d0 net/socket.c:1217 sock_ioctl+0x4e8/0x834 net/socket.c:1322 vfs_ioctl fs/ioctl.c:51 [inline] __do_ ---truncated--- |
| CVE-2023-52783 | In the Linux kernel, the following vulnerability has been resolved: net: wangxun: fix kernel panic due to null pointer When the device uses a custom subsystem vendor ID, the function wx_sw_init() returns before the memory of 'wx->mac_table' is allocated. The null pointer will causes the kernel panic. |
| CVE-2023-52782 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Track xmit submission to PTP WQ after populating metadata map Ensure the skb is available in metadata mapping to skbs before tracking the metadata index for detecting undelivered CQEs. If the metadata index is put in the tracking list before putting the skb in the map, the metadata index might be used for detecting undelivered CQEs before the relevant skb is available in the map, which can lead to a null-ptr-deref. Log: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events mlx5e_rx_dim_work [mlx5_core] RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07 RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206 RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005 RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028 RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383 R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40 R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? die_addr+0x3c/0xa0 ? exc_general_protection+0x144/0x210 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] ? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core] __napi_poll.constprop.0+0xa4/0x580 net_rx_action+0x460/0xb80 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? __napi_poll.constprop.0+0x580/0x580 ? tasklet_action_common.isra.0+0x2ef/0x760 __do_softirq+0x26c/0x827 irq_exit_rcu+0xc2/0x100 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:__kmem_cache_alloc_node+0xb/0x330 Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83 RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246 RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218 RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0 RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9 R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0 R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450 ? cmd_exec+0x796/0x2200 [mlx5_core] kmalloc_trace+0x26/0xc0 cmd_exec+0x796/0x2200 [mlx5_core] mlx5_cmd_do+0x22/0xc0 [mlx5_core] mlx5_cmd_exec+0x17/0x30 [mlx5_core] mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core] ? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core] ? lockdep_set_lock_cmp_fn+0x190/0x190 ? process_one_work+0x659/0x1220 mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core] process_one_work+0x730/0x1220 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? max_active_store+0xf0/0xf0 ? assign_work+0x168/0x240 worker_thread+0x70f/0x12d0 ? __kthread_parkme+0xd1/0x1d0 ? process_one_work+0x1220/0x1220 kthread+0x2d9/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_as ---truncated--- |
| CVE-2023-52781 | In the Linux kernel, the following vulnerability has been resolved: usb: config: fix iteration issue in 'usb_get_bos_descriptor()' The BOS descriptor defines a root descriptor and is the base descriptor for accessing a family of related descriptors. Function 'usb_get_bos_descriptor()' encounters an iteration issue when skipping the 'USB_DT_DEVICE_CAPABILITY' descriptor type. This results in the same descriptor being read repeatedly. To address this issue, a 'goto' statement is introduced to ensure that the pointer and the amount read is updated correctly. This ensures that the function iterates to the next descriptor instead of reading the same descriptor repeatedly. |
| CVE-2023-52780 | In the Linux kernel, the following vulnerability has been resolved: net: mvneta: fix calls to page_pool_get_stats Calling page_pool_get_stats in the mvneta driver without checks leads to kernel crashes. First the page pool is only available if the bm is not used. The page pool is also not allocated when the port is stopped. It can also be not allocated in case of errors. The current implementation leads to the following crash calling ethstats on a port that is down or when calling it at the wrong moment: ble to handle kernel NULL pointer dereference at virtual address 00000070 [00000070] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Hardware name: Marvell Armada 380/385 (Device Tree) PC is at page_pool_get_stats+0x18/0x1cc LR is at mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] pc : [<c0b413cc>] lr : [<bf0a98d8>] psr: a0000013 sp : f1439d48 ip : f1439dc0 fp : 0000001d r10: 00000100 r9 : c4816b80 r8 : f0d75150 r7 : bf0b400c r6 : c238f000 r5 : 00000000 r4 : f1439d68 r3 : c2091040 r2 : ffffffd8 r1 : f1439d68 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 066b004a DAC: 00000051 Register r0 information: NULL pointer Register r1 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r2 information: non-paged memory Register r3 information: slab kmalloc-2k start c2091000 pointer offset 64 size 2048 Register r4 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r5 information: NULL pointer Register r6 information: slab kmalloc-cg-4k start c238f000 pointer offset 0 size 4096 Register r7 information: 15-page vmalloc region starting at 0xbf0a8000 allocated at load_module+0xa30/0x219c Register r8 information: 1-page vmalloc region starting at 0xf0d75000 allocated at ethtool_get_stats+0x138/0x208 Register r9 information: slab task_struct start c4816b80 pointer offset 0 Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Process snmpd (pid: 733, stack limit = 0x38de3a88) Stack: (0xf1439d48 to 0xf143a000) 9d40: 000000c0 00000001 c238f000 bf0b400c f0d75150 c4816b80 9d60: 00000100 bf0a98d8 00000000 00000000 00000000 00000000 00000000 00000000 9d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9dc0: 00000dc0 5335509c 00000035 c238f000 bf0b2214 01067f50 f0d75000 c0b9b9c8 9de0: 0000001d 00000035 c2212094 5335509c c4816b80 c238f000 c5ad6e00 01067f50 9e00: c1b0be80 c4816b80 00014813 c0b9d7f0 00000000 00000000 0000001d 0000001d 9e20: 00000000 00001200 00000000 00000000 c216ed90 c73943b8 00000000 00000000 9e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9e60: 00000000 c0ad9034 00000000 00000000 00000000 00000000 00000000 00000000 9e80: 00000000 00000000 00000000 5335509c c1b0be80 f1439ee4 00008946 c1b0be80 9ea0: 01067f50 f1439ee3 00000000 00000046 b6d77ae0 c0b383f0 00008946 becc83e8 9ec0: c1b0be80 00000051 0000000b c68ca480 c7172d00 c0ad8ff0 f1439ee3 cf600e40 9ee0: 01600e40 32687465 00000000 00000000 00000000 01067f50 00000000 00000000 9f00: 00000000 5335509c 00008946 00008946 00000000 c68ca480 becc83e8 c05e2de0 9f20: f1439fb0 c03002f0 00000006 5ac3c35a c4816b80 00000006 b6d77ae0 c030caf0 9f40: c4817350 00000014 f1439e1c 0000000c 00000000 00000051 01000000 00000014 9f60: 00003fec f1439edc 00000001 c0372abc b6d77ae0 c0372abc cf600e40 5335509c 9f80: c21e6800 01015c9c 0000000b 00008946 00000036 c03002f0 c4816b80 00000036 9fa0: b6d77ae0 c03000c0 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 40000030 0000000b 00000000 00000000 page_pool_get_s ---truncated--- |
| CVE-2023-52779 | In the Linux kernel, the following vulnerability has been resolved: fs: Pass AT_GETATTR_NOSEC flag to getattr interface function When vfs_getattr_nosec() calls a filesystem's getattr interface function then the 'nosec' should propagate into this function so that vfs_getattr_nosec() can again be called from the filesystem's gettattr rather than vfs_getattr(). The latter would add unnecessary security checks that the initial vfs_getattr_nosec() call wanted to avoid. Therefore, introduce the getattr flag GETATTR_NOSEC and allow to pass with the new getattr_flags parameter to the getattr interface function. In overlayfs and ecryptfs use this flag to determine which one of the two functions to call. In a recent code change introduced to IMA vfs_getattr_nosec() ended up calling vfs_getattr() in overlayfs, which in turn called security_inode_getattr() on an exiting process that did not have current->fs set anymore, which then caused a kernel NULL pointer dereference. With this change the call to security_inode_getattr() can be avoided, thus avoiding the NULL pointer dereference. |
| CVE-2023-52778 | In the Linux kernel, the following vulnerability has been resolved: mptcp: deal with large GSO size After the blamed commit below, the TCP sockets (and the MPTCP subflows) can build egress packets larger than 64K. That exceeds the maximum DSS data size, the length being misrepresent on the wire and the stream being corrupted, as later observed on the receiver: WARNING: CPU: 0 PID: 9696 at net/mptcp/protocol.c:705 __mptcp_move_skbs_from_subflow+0x2604/0x26e0 CPU: 0 PID: 9696 Comm: syz-executor.7 Not tainted 6.6.0-rc5-gcd8bdf563d46 #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'. RIP: 0010:__mptcp_move_skbs_from_subflow+0x2604/0x26e0 net/mptcp/protocol.c:705 RSP: 0018:ffffc90000006e80 EFLAGS: 00010246 RAX: ffffffff83e9f674 RBX: ffff88802f45d870 RCX: ffff888102ad0000 netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'. RDX: 0000000080000303 RSI: 0000000000013908 RDI: 0000000000003908 RBP: ffffc90000007110 R08: ffffffff83e9e078 R09: 1ffff1100e548c8a R10: dffffc0000000000 R11: ffffed100e548c8b R12: 0000000000013908 R13: dffffc0000000000 R14: 0000000000003908 R15: 000000000031cf29 FS: 00007f239c47e700(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f239c45cd78 CR3: 000000006a66c006 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <IRQ> mptcp_data_ready+0x263/0xac0 net/mptcp/protocol.c:819 subflow_data_ready+0x268/0x6d0 net/mptcp/subflow.c:1409 tcp_data_queue+0x21a1/0x7a60 net/ipv4/tcp_input.c:5151 tcp_rcv_established+0x950/0x1d90 net/ipv4/tcp_input.c:6098 tcp_v6_do_rcv+0x554/0x12f0 net/ipv6/tcp_ipv6.c:1483 tcp_v6_rcv+0x2e26/0x3810 net/ipv6/tcp_ipv6.c:1749 ip6_protocol_deliver_rcu+0xd6b/0x1ae0 net/ipv6/ip6_input.c:438 ip6_input+0x1c5/0x470 net/ipv6/ip6_input.c:483 ipv6_rcv+0xef/0x2c0 include/linux/netfilter.h:304 __netif_receive_skb+0x1ea/0x6a0 net/core/dev.c:5532 process_backlog+0x353/0x660 net/core/dev.c:5974 __napi_poll+0xc6/0x5a0 net/core/dev.c:6536 net_rx_action+0x6a0/0xfd0 net/core/dev.c:6603 __do_softirq+0x184/0x524 kernel/softirq.c:553 do_softirq+0xdd/0x130 kernel/softirq.c:454 Address the issue explicitly bounding the maximum GSO size to what MPTCP actually allows. |
| CVE-2023-52777 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix gtk offload status event locking The ath11k active pdevs are protected by RCU but the gtk offload status event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. |
| CVE-2023-52776 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix dfs-radar and temperature event locking The ath12k active pdevs are protected by RCU but the DFS-radar and temperature event handling code calling ath12k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as RCU read-side critical sections to avoid any potential use-after-free issues. Note that the temperature event handler looks like a place holder currently but would still trigger an RCU lockdep splat. Compile tested only. |
| CVE-2023-52775 | In the Linux kernel, the following vulnerability has been resolved: net/smc: avoid data corruption caused by decline We found a data corruption issue during testing of SMC-R on Redis applications. The benchmark has a low probability of reporting a strange error as shown below. "Error: Protocol error, got "\xe2" as reply type byte" Finally, we found that the retrieved error data was as follows: 0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C 0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2 It is quite obvious that this is a SMC DECLINE message, which means that the applications received SMC protocol message. We found that this was caused by the following situations: client server ¦ clc proposal -------------> ¦ clc accept <------------- ¦ clc confirm -------------> wait llc confirm send llc confirm ¦failed llc confirm ¦ x------ (after 2s)timeout wait llc confirm rsp wait decline (after 1s) timeout (after 2s) timeout ¦ decline --------------> ¦ decline <-------------- As a result, a decline message was sent in the implementation, and this message was read from TCP by the already-fallback connection. This patch double the client timeout as 2x of the server value, With this simple change, the Decline messages should never cross or collide (during Confirm link timeout). This issue requires an immediate solution, since the protocol updates involve a more long-term solution. |
| CVE-2023-52774 | In the Linux kernel, the following vulnerability has been resolved: s390/dasd: protect device queue against concurrent access In dasd_profile_start() the amount of requests on the device queue are counted. The access to the device queue is unprotected against concurrent access. With a lot of parallel I/O, especially with alias devices enabled, the device queue can change while dasd_profile_start() is accessing the queue. In the worst case this leads to a kernel panic due to incorrect pointer accesses. Fix this by taking the device lock before accessing the queue and counting the requests. Additionally the check for a valid profile data pointer can be done earlier to avoid unnecessary locking in a hot path. |
| CVE-2023-52773 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix a NULL pointer dereference in amdgpu_dm_i2c_xfer() When ddc_service_construct() is called, it explicitly checks both the link type and whether there is something on the link which will dictate whether the pin is marked as hw_supported. If the pin isn't set or the link is not set (such as from unloading/reloading amdgpu in an IGT test) then fail the amdgpu_dm_i2c_xfer() call. |
| CVE-2023-52772 | In the Linux kernel, the following vulnerability has been resolved: af_unix: fix use-after-free in unix_stream_read_actor() syzbot reported the following crash [1] After releasing unix socket lock, u->oob_skb can be changed by another thread. We must temporarily increase skb refcount to make sure this other thread will not free the skb under us. [1] BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 Read of size 4 at addr ffff88801f3b9cc4 by task syz-executor107/5297 CPU: 1 PID: 5297 Comm: syz-executor107 Not tainted 6.6.0-syzkaller-15910-gb8e3a87a627b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc4/0x620 mm/kasan/report.c:475 kasan_report+0xda/0x110 mm/kasan/report.c:588 unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 unix_stream_recv_urg net/unix/af_unix.c:2587 [inline] unix_stream_read_generic+0x19a5/0x2480 net/unix/af_unix.c:2666 unix_stream_recvmsg+0x189/0x1b0 net/unix/af_unix.c:2903 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0xe2/0x170 net/socket.c:1066 ____sys_recvmsg+0x21f/0x5c0 net/socket.c:2803 ___sys_recvmsg+0x115/0x1a0 net/socket.c:2845 __sys_recvmsg+0x114/0x1e0 net/socket.c:2875 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7fc67492c559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6748ab228 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 000000000000001c RCX: 00007fc67492c559 RDX: 0000000040010083 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 00007fc6749b6348 R08: 00007fc6748ab6c0 R09: 00007fc6748ab6c0 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc6749b6340 R13: 00007fc6749b634c R14: 00007ffe9fac52a0 R15: 00007ffe9fac5388 </TASK> Allocated by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x180/0x3c0 mm/slub.c:3523 __alloc_skb+0x287/0x330 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331 sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] queue_oob net/unix/af_unix.c:2147 [inline] unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1800 [inline] slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826 slab_free mm/slub.c:3809 [inline] kmem_cache_free+0xf8/0x340 mm/slub.c:3831 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:1015 __kfree_skb net/core/skbuff.c:1073 [inline] consume_skb net/core/skbuff.c:1288 [inline] consume_skb+0xdf/0x170 net/core/skbuff.c:1282 queue_oob net/unix/af_unix.c:2178 [inline] u ---truncated--- |
| CVE-2023-52771 | In the Linux kernel, the following vulnerability has been resolved: cxl/port: Fix delete_endpoint() vs parent unregistration race The CXL subsystem, at cxl_mem ->probe() time, establishes a lineage of ports (struct cxl_port objects) between an endpoint and the root of a CXL topology. Each port including the endpoint port is attached to the cxl_port driver. Given that setup, it follows that when either any port in that lineage goes through a cxl_port ->remove() event, or the memdev goes through a cxl_mem ->remove() event. The hierarchy below the removed port, or the entire hierarchy if the memdev is removed needs to come down. The delete_endpoint() callback is careful to check whether it is being called to tear down the hierarchy, or if it is only being called to teardown the memdev because an ancestor port is going through ->remove(). That care needs to take the device_lock() of the endpoint's parent. Which requires 2 bugs to be fixed: 1/ A reference on the parent is needed to prevent use-after-free scenarios like this signature: BUG: spinlock bad magic on CPU#0, kworker/u56:0/11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc38 05/24/2023 Workqueue: cxl_port detach_memdev [cxl_core] RIP: 0010:spin_bug+0x65/0xa0 Call Trace: do_raw_spin_lock+0x69/0xa0 __mutex_lock+0x695/0xb80 delete_endpoint+0xad/0x150 [cxl_core] devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1d2/0x210 detach_memdev+0x15/0x20 [cxl_core] process_one_work+0x1e3/0x4c0 worker_thread+0x1dd/0x3d0 2/ In the case of RCH topologies, the parent device that needs to be locked is not always @port->dev as returned by cxl_mem_find_port(), use endpoint->dev.parent instead. |
| CVE-2023-52770 | In the Linux kernel, the following vulnerability has been resolved: f2fs: split initial and dynamic conditions for extent_cache Let's allocate the extent_cache tree without dynamic conditions to avoid a missing condition causing a panic as below. # create a file w/ a compressed flag # disable the compression # panic while updating extent_cache F2FS-fs (dm-64): Swapfile: last extent is not aligned to section F2FS-fs (dm-64): Swapfile (3) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * N) Adding 124996k swap on ./swap-file. Priority:0 extents:2 across:17179494468k ================================================================== BUG: KASAN: null-ptr-deref in instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] BUG: KASAN: null-ptr-deref in atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] BUG: KASAN: null-ptr-deref in queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] BUG: KASAN: null-ptr-deref in __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] BUG: KASAN: null-ptr-deref in _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 Write of size 4 at addr 0000000000000030 by task syz-executor154/3327 CPU: 0 PID: 3327 Comm: syz-executor154 Tainted: G O 5.10.185 #1 Hardware name: emulation qemu-x86/qemu-x86, BIOS 2023.01-21885-gb3cc1cd24d 01/01/2023 Call Trace: __dump_stack out/common/lib/dump_stack.c:77 [inline] dump_stack_lvl+0x17e/0x1c4 out/common/lib/dump_stack.c:118 __kasan_report+0x16c/0x260 out/common/mm/kasan/report.c:415 kasan_report+0x51/0x70 out/common/mm/kasan/report.c:428 kasan_check_range+0x2f3/0x340 out/common/mm/kasan/generic.c:186 __kasan_check_write+0x14/0x20 out/common/mm/kasan/shadow.c:37 instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 __drop_extent_tree+0xdf/0x2f0 out/common/fs/f2fs/extent_cache.c:1155 f2fs_drop_extent_tree+0x17/0x30 out/common/fs/f2fs/extent_cache.c:1172 f2fs_insert_range out/common/fs/f2fs/file.c:1600 [inline] f2fs_fallocate+0x19fd/0x1f40 out/common/fs/f2fs/file.c:1764 vfs_fallocate+0x514/0x9b0 out/common/fs/open.c:310 ksys_fallocate out/common/fs/open.c:333 [inline] __do_sys_fallocate out/common/fs/open.c:341 [inline] __se_sys_fallocate out/common/fs/open.c:339 [inline] __x64_sys_fallocate+0xb8/0x100 out/common/fs/open.c:339 do_syscall_64+0x35/0x50 out/common/arch/x86/entry/common.c:46 |
| CVE-2023-52769 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix htt mlo-offset event locking The ath12k active pdevs are protected by RCU but the htt mlo-offset event handling code calling ath12k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. |
| CVE-2023-52768 | In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: use vmm_table as array in wilc struct Enabling KASAN and running some iperf tests raises some memory issues with vmm_table: BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4 Write of size 4 at addr c3a61540 by task wlan0-tx/95 KASAN detects that we are writing data beyond range allocated to vmm_table. There is indeed a mismatch between the size passed to allocator in wilc_wlan_init, and the range of possible indexes used later: allocation size is missing a multiplication by sizeof(u32) |
| CVE-2023-52767 | In the Linux kernel, the following vulnerability has been resolved: tls: fix NULL deref on tls_sw_splice_eof() with empty record syzkaller discovered that if tls_sw_splice_eof() is executed as part of sendfile() when the plaintext/ciphertext sk_msg are empty, the send path gets confused because the empty ciphertext buffer does not have enough space for the encryption overhead. This causes tls_push_record() to go on the `split = true` path (which is only supposed to be used when interacting with an attached BPF program), and then get further confused and hit the tls_merge_open_record() path, which then assumes that there must be at least one populated buffer element, leading to a NULL deref. It is possible to have empty plaintext/ciphertext buffers if we previously bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path. tls_sw_push_pending_record() already handles this case correctly; let's do the same check in tls_sw_splice_eof(). |
| CVE-2023-52766 | In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler Do not loop over ring headers in hci_dma_irq_handler() that are not allocated and enabled in hci_dma_init(). Otherwise out of bounds access will occur from rings->headers[i] access when i >= number of allocated ring headers. |
| CVE-2023-52765 | In the Linux kernel, the following vulnerability has been resolved: mfd: qcom-spmi-pmic: Fix revid implementation The Qualcomm SPMI PMIC revid implementation is broken in multiple ways. First, it assumes that just because the sibling base device has been registered that means that it is also bound to a driver, which may not be the case (e.g. due to probe deferral or asynchronous probe). This could trigger a NULL-pointer dereference when attempting to access the driver data of the unbound device. Second, it accesses driver data of a sibling device directly and without any locking, which means that the driver data may be freed while it is being accessed (e.g. on driver unbind). Third, it leaks a struct device reference to the sibling device which is looked up using the spmi_device_from_of() every time a function (child) device is calling the revid function (e.g. on probe). Fix this mess by reimplementing the revid lookup so that it is done only at probe of the PMIC device; the base device fetches the revid info from the hardware, while any secondary SPMI device fetches the information from the base device and caches it so that it can be accessed safely from its children. If the base device has not been probed yet then probe of a secondary device is deferred. |
| CVE-2023-52764 | In the Linux kernel, the following vulnerability has been resolved: media: gspca: cpia1: shift-out-of-bounds in set_flicker Syzkaller reported the following issue: UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27 shift exponent 245 is too large for 32-bit type 'int' When the value of the variable "sd->params.exposure.gain" exceeds the number of bits in an integer, a shift-out-of-bounds error is reported. It is triggered because the variable "currentexp" cannot be left-shifted by more than the number of bits in an integer. In order to avoid invalid range during left-shift, the conditional expression is added. |
| CVE-2023-52763 | In the Linux kernel, the following vulnerability has been resolved: i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data. The `i3c_master_bus_init` function may attach the I2C devices before the I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails, the DAT `cleanup` will execute before the device is detached, which will execue DAT `free_entry` function. The above scenario can cause the driver to use DAT_data when it is NULL. |
| CVE-2023-52762 | In the Linux kernel, the following vulnerability has been resolved: virtio-blk: fix implicit overflow on virtio_max_dma_size The following codes have an implicit conversion from size_t to u32: (u32)max_size = (size_t)virtio_max_dma_size(vdev); This may lead overflow, Ex (size_t)4G -> (u32)0. Once virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX instead. |
| CVE-2023-52761 | In the Linux kernel, the following vulnerability has been resolved: riscv: VMAP_STACK overflow detection thread-safe commit 31da94c25aea ("riscv: add VMAP_STACK overflow detection") added support for CONFIG_VMAP_STACK. If overflow is detected, CPU switches to `shadow_stack` temporarily before switching finally to per-cpu `overflow_stack`. If two CPUs/harts are racing and end up in over flowing kernel stack, one or both will end up corrupting each other state because `shadow_stack` is not per-cpu. This patch optimizes per-cpu overflow stack switch by directly picking per-cpu `overflow_stack` and gets rid of `shadow_stack`. Following are the changes in this patch - Defines an asm macro to obtain per-cpu symbols in destination register. - In entry.S, when overflow is detected, per-cpu overflow stack is located using per-cpu asm macro. Computing per-cpu symbol requires a temporary register. x31 is saved away into CSR_SCRATCH (CSR_SCRATCH is anyways zero since we're in kernel). Please see Links for additional relevant disccussion and alternative solution. Tested by `echo EXHAUST_STACK > /sys/kernel/debug/provoke-crash/DIRECT` Kernel crash log below Insufficient stack space to handle exception!/debug/provoke-crash/DIRECT Task stack: [0xff20000010a98000..0xff20000010a9c000] Overflow stack: [0xff600001f7d98370..0xff600001f7d99370] CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) epc : __memset+0x60/0xfc ra : recursive_loop+0x48/0xc6 [lkdtm] epc : ffffffff808de0e4 ra : ffffffff0163a752 sp : ff20000010a97e80 gp : ffffffff815c0330 tp : ff600000820ea280 t0 : ff20000010a97e88 t1 : 000000000000002e t2 : 3233206874706564 s0 : ff20000010a982b0 s1 : 0000000000000012 a0 : ff20000010a97e88 a1 : 0000000000000000 a2 : 0000000000000400 a3 : ff20000010a98288 a4 : 0000000000000000 a5 : 0000000000000000 a6 : fffffffffffe43f0 a7 : 00007fffffffffff s2 : ff20000010a97e88 s3 : ffffffff01644680 s4 : ff20000010a9be90 s5 : ff600000842ba6c0 s6 : 00aaaaaac29e42b0 s7 : 00fffffff0aa3684 s8 : 00aaaaaac2978040 s9 : 0000000000000065 s10: 00ffffff8a7cad10 s11: 00ffffff8a76a4e0 t3 : ffffffff815dbaf4 t4 : ffffffff815dbaf4 t5 : ffffffff815dbab8 t6 : ff20000010a9bb48 status: 0000000200000120 badaddr: ff20000010a97e88 cause: 000000000000000f Kernel panic - not syncing: Kernel stack overflow CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff80006754>] dump_backtrace+0x30/0x38 [<ffffffff808de798>] show_stack+0x40/0x4c [<ffffffff808ea2a8>] dump_stack_lvl+0x44/0x5c [<ffffffff808ea2d8>] dump_stack+0x18/0x20 [<ffffffff808dec06>] panic+0x126/0x2fe [<ffffffff800065ea>] walk_stackframe+0x0/0xf0 [<ffffffff0163a752>] recursive_loop+0x48/0xc6 [lkdtm] SMP: stopping secondary CPUs ---[ end Kernel panic - not syncing: Kernel stack overflow ]--- |
| CVE-2023-52760 | In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in gfs2_qd_dealloc In gfs2_put_super(), whether withdrawn or not, the quota should be cleaned up by gfs2_quota_cleanup(). Otherwise, struct gfs2_sbd will be freed before gfs2_qd_dealloc (rcu callback) has run for all gfs2_quota_data objects, resulting in use-after-free. Also, gfs2_destroy_threads() and gfs2_quota_cleanup() is already called by gfs2_make_fs_ro(), so in gfs2_put_super(), after calling gfs2_make_fs_ro(), there is no need to call them again. |
| CVE-2023-52759 | In the Linux kernel, the following vulnerability has been resolved: gfs2: ignore negated quota changes When lots of quota changes are made, there may be cases in which an inode's quota information is increased and then decreased, such as when blocks are added to a file, then deleted from it. If the timing is right, function do_qc can add pending quota changes to a transaction, then later, another call to do_qc can negate those changes, resulting in a net gain of 0. The quota_change information is recorded in the qc buffer (and qd element of the inode as well). The buffer is added to the transaction by the first call to do_qc, but a subsequent call changes the value from non-zero back to zero. At that point it's too late to remove the buffer_head from the transaction. Later, when the quota sync code is called, the zero-change qd element is discovered and flagged as an assert warning. If the fs is mounted with errors=panic, the kernel will panic. This is usually seen when files are truncated and the quota changes are negated by punch_hole/truncate which uses gfs2_quota_hold and gfs2_quota_unhold rather than block allocations that use gfs2_quota_lock and gfs2_quota_unlock which automatically do quota sync. This patch solves the problem by adding a check to qd_check_sync such that net-zero quota changes already added to the transaction are no longer deemed necessary to be synced, and skipped. In this case references are taken for the qd and the slot from do_qc so those need to be put. The normal sequence of events for a normal non-zero quota change is as follows: gfs2_quota_change do_qc qd_hold slot_hold Later, when the changes are to be synced: gfs2_quota_sync qd_fish qd_check_sync gets qd ref via lockref_get_not_dead do_sync do_qc(QC_SYNC) qd_put lockref_put_or_lock qd_unlock qd_put lockref_put_or_lock In the net-zero change case, we add a check to qd_check_sync so it puts the qd and slot references acquired in gfs2_quota_change and skip the unneeded sync. |
| CVE-2023-52757 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential deadlock when releasing mids All release_mid() callers seem to hold a reference of @mid so there is no need to call kref_put(&mid->refcount, __release_mid) under @server->mid_lock spinlock. If they don't, then an use-after-free bug would have occurred anyways. By getting rid of such spinlock also fixes a potential deadlock as shown below CPU 0 CPU 1 ------------------------------------------------------------------ cifs_demultiplex_thread() cifs_debug_data_proc_show() release_mid() spin_lock(&server->mid_lock); spin_lock(&cifs_tcp_ses_lock) spin_lock(&server->mid_lock) __release_mid() smb2_find_smb_tcon() spin_lock(&cifs_tcp_ses_lock) *deadlock* |
| CVE-2023-52755 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab out of bounds write in smb_inherit_dacl() slab out-of-bounds write is caused by that offsets is bigger than pntsd allocation size. This patch add the check to validate 3 offsets using allocation size. |
| CVE-2023-52754 | In the Linux kernel, the following vulnerability has been resolved: media: imon: fix access to invalid resource for the second interface imon driver probes two USB interfaces, and at the probe of the second interface, the driver assumes blindly that the first interface got bound with the same imon driver. It's usually true, but it's still possible that the first interface is bound with another driver via a malformed descriptor. Then it may lead to a memory corruption, as spotted by syzkaller; imon driver accesses the data from drvdata as struct imon_context object although it's a completely different one that was assigned by another driver. This patch adds a sanity check -- whether the first interface is really bound with the imon driver or not -- for avoiding the problem above at the probe time. |
| CVE-2023-52753 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid NULL dereference of timing generator [Why & How] Check whether assigned timing generator is NULL or not before accessing its funcs to prevent NULL dereference. |
| CVE-2023-52752 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free bug in cifs_debug_data_proc_show() Skip SMB sessions that are being teared down (e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show() to avoid use-after-free in @ses. This fixes the following GPF when reading from /proc/fs/cifs/DebugData while mounting and umounting [ 816.251274] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI ... [ 816.260138] Call Trace: [ 816.260329] <TASK> [ 816.260499] ? die_addr+0x36/0x90 [ 816.260762] ? exc_general_protection+0x1b3/0x410 [ 816.261126] ? asm_exc_general_protection+0x26/0x30 [ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs] [ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs] [ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs] [ 816.262689] ? seq_read_iter+0x379/0x470 [ 816.262995] seq_read_iter+0x118/0x470 [ 816.263291] proc_reg_read_iter+0x53/0x90 [ 816.263596] ? srso_alias_return_thunk+0x5/0x7f [ 816.263945] vfs_read+0x201/0x350 [ 816.264211] ksys_read+0x75/0x100 [ 816.264472] do_syscall_64+0x3f/0x90 [ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 816.265135] RIP: 0033:0x7fd5e669d381 |
| CVE-2023-52751 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free in smb2_query_info_compound() The following UAF was triggered when running fstests generic/072 with KASAN enabled against Windows Server 2022 and mount options 'multichannel,max_channels=2,vers=3.1.1,mfsymlinks,noperm' BUG: KASAN: slab-use-after-free in smb2_query_info_compound+0x423/0x6d0 [cifs] Read of size 8 at addr ffff888014941048 by task xfs_io/27534 CPU: 0 PID: 27534 Comm: xfs_io Not tainted 6.6.0-rc7 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Call Trace: dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x650 ? srso_alias_return_thunk+0x5/0x7f ? srso_alias_return_thunk+0x5/0x7f ? __phys_addr+0x46/0x90 kasan_report+0xda/0x110 ? smb2_query_info_compound+0x423/0x6d0 [cifs] ? smb2_query_info_compound+0x423/0x6d0 [cifs] smb2_query_info_compound+0x423/0x6d0 [cifs] ? __pfx_smb2_query_info_compound+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0x7f ? __stack_depot_save+0x39/0x480 ? kasan_save_stack+0x33/0x60 ? kasan_set_track+0x25/0x30 ? ____kasan_slab_free+0x126/0x170 smb2_queryfs+0xc2/0x2c0 [cifs] ? __pfx_smb2_queryfs+0x10/0x10 [cifs] ? __pfx___lock_acquire+0x10/0x10 smb311_queryfs+0x210/0x220 [cifs] ? __pfx_smb311_queryfs+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0x7f ? __lock_acquire+0x480/0x26c0 ? lock_release+0x1ed/0x640 ? srso_alias_return_thunk+0x5/0x7f ? do_raw_spin_unlock+0x9b/0x100 cifs_statfs+0x18c/0x4b0 [cifs] statfs_by_dentry+0x9b/0xf0 fd_statfs+0x4e/0xb0 __do_sys_fstatfs+0x7f/0xe0 ? __pfx___do_sys_fstatfs+0x10/0x10 ? srso_alias_return_thunk+0x5/0x7f ? lockdep_hardirqs_on_prepare+0x136/0x200 ? srso_alias_return_thunk+0x5/0x7f do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 27534: kasan_save_stack+0x33/0x60 kasan_set_track+0x25/0x30 __kasan_kmalloc+0x8f/0xa0 open_cached_dir+0x71b/0x1240 [cifs] smb2_query_info_compound+0x5c3/0x6d0 [cifs] smb2_queryfs+0xc2/0x2c0 [cifs] smb311_queryfs+0x210/0x220 [cifs] cifs_statfs+0x18c/0x4b0 [cifs] statfs_by_dentry+0x9b/0xf0 fd_statfs+0x4e/0xb0 __do_sys_fstatfs+0x7f/0xe0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 27534: kasan_save_stack+0x33/0x60 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2b/0x50 ____kasan_slab_free+0x126/0x170 slab_free_freelist_hook+0xd0/0x1e0 __kmem_cache_free+0x9d/0x1b0 open_cached_dir+0xff5/0x1240 [cifs] smb2_query_info_compound+0x5c3/0x6d0 [cifs] smb2_queryfs+0xc2/0x2c0 [cifs] This is a race between open_cached_dir() and cached_dir_lease_break() where the cache entry for the open directory handle receives a lease break while creating it. And before returning from open_cached_dir(), we put the last reference of the new @cfid because of !@cfid->has_lease. Besides the UAF, while running xfstests a lot of missed lease breaks have been noticed in tests that run several concurrent statfs(2) calls on those cached fids CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame... CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1... CIFS: VFS: \\w22-root1.gandalf.test smb buf 00000000715bfe83 len 108 CIFS: VFS: Dump pending requests: CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame... CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1... CIFS: VFS: \\w22-root1.gandalf.test smb buf 000000005aa7316e len 108 ... To fix both, in open_cached_dir() ensure that @cfid->has_lease is set right before sending out compounded request so that any potential lease break will be get processed by demultiplex thread while we're still caching @cfid. And, if open failed for some reason, re-check @cfid->has_lease to decide whether or not put lease reference. |
| CVE-2023-52750 | In the Linux kernel, the following vulnerability has been resolved: arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer Prior to LLVM 15.0.0, LLVM's integrated assembler would incorrectly byte-swap NOP when compiling for big-endian, and the resulting series of bytes happened to match the encoding of FNMADD S21, S30, S0, S0. This went unnoticed until commit: 34f66c4c4d5518c1 ("arm64: Use a positive cpucap for FP/SIMD") Prior to that commit, the kernel would always enable the use of FPSIMD early in boot when __cpu_setup() initialized CPACR_EL1, and so usage of FNMADD within the kernel was not detected, but could result in the corruption of user or kernel FPSIMD state. After that commit, the instructions happen to trap during boot prior to FPSIMD being detected and enabled, e.g. | Unhandled 64-bit el1h sync exception on CPU0, ESR 0x000000001fe00000 -- ASIMD | CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 400000c9 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __pi_strcmp+0x1c/0x150 | lr : populate_properties+0xe4/0x254 | sp : ffffd014173d3ad0 | x29: ffffd014173d3af0 x28: fffffbfffddffcb8 x27: 0000000000000000 | x26: 0000000000000058 x25: fffffbfffddfe054 x24: 0000000000000008 | x23: fffffbfffddfe000 x22: fffffbfffddfe000 x21: fffffbfffddfe044 | x20: ffffd014173d3b70 x19: 0000000000000001 x18: 0000000000000005 | x17: 0000000000000010 x16: 0000000000000000 x15: 00000000413e7000 | x14: 0000000000000000 x13: 0000000000001bcc x12: 0000000000000000 | x11: 00000000d00dfeed x10: ffffd414193f2cd0 x9 : 0000000000000000 | x8 : 0101010101010101 x7 : ffffffffffffffc0 x6 : 0000000000000000 | x5 : 0000000000000000 x4 : 0101010101010101 x3 : 000000000000002a | x2 : 0000000000000001 x1 : ffffd014171f2988 x0 : fffffbfffddffcb8 | Kernel panic - not syncing: Unhandled exception | CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0xec/0x108 | show_stack+0x18/0x2c | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | panic+0x13c/0x340 | el1t_64_irq_handler+0x0/0x1c | el1_abort+0x0/0x5c | el1h_64_sync+0x64/0x68 | __pi_strcmp+0x1c/0x150 | unflatten_dt_nodes+0x1e8/0x2d8 | __unflatten_device_tree+0x5c/0x15c | unflatten_device_tree+0x38/0x50 | setup_arch+0x164/0x1e0 | start_kernel+0x64/0x38c | __primary_switched+0xbc/0xc4 Restrict CONFIG_CPU_BIG_ENDIAN to a known good assembler, which is either GNU as or LLVM's IAS 15.0.0 and newer, which contains the linked commit. |
| CVE-2023-52749 | In the Linux kernel, the following vulnerability has been resolved: spi: Fix null dereference on suspend A race condition exists where a synchronous (noqueue) transfer can be active during a system suspend. This can cause a null pointer dereference exception to occur when the system resumes. Example order of events leading to the exception: 1. spi_sync() calls __spi_transfer_message_noqueue() which sets ctlr->cur_msg 2. Spi transfer begins via spi_transfer_one_message() 3. System is suspended interrupting the transfer context 4. System is resumed 6. spi_controller_resume() calls spi_start_queue() which resets cur_msg to NULL 7. Spi transfer context resumes and spi_finalize_current_message() is called which dereferences cur_msg (which is now NULL) Wait for synchronous transfers to complete before suspending by acquiring the bus mutex and setting/checking a suspend flag. |
| CVE-2023-52748 | In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid format-overflow warning With gcc and W=1 option, there's a warning like this: fs/f2fs/compress.c: In function ‘f2fs_init_page_array_cache’: fs/f2fs/compress.c:1984:47: error: ‘%u’ directive writing between 1 and 7 bytes into a region of size between 5 and 8 [-Werror=format-overflow=] 1984 | sprintf(slab_name, "f2fs_page_array_entry-%u:%u", MAJOR(dev), MINOR(dev)); | ^~ String "f2fs_page_array_entry-%u:%u" can up to 35. The first "%u" can up to 4 and the second "%u" can up to 7, so total size is "24 + 4 + 7 = 35". slab_name's size should be 35 rather than 32. |
| CVE-2023-52747 | In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Restore allocated resources on failed copyout Fix a resource leak if an error occurs. |
| CVE-2023-52746 | In the Linux kernel, the following vulnerability has been resolved: xfrm/compat: prevent potential spectre v1 gadget in xfrm_xlate32_attr() int type = nla_type(nla); if (type > XFRMA_MAX) { return -EOPNOTSUPP; } @type is then used as an array index and can be used as a Spectre v1 gadget. if (nla_len(nla) < compat_policy[type].len) { array_index_nospec() can be used to prevent leaking content of kernel memory to malicious users. |
| CVE-2023-52745 | In the Linux kernel, the following vulnerability has been resolved: IB/IPoIB: Fix legacy IPoIB due to wrong number of queues The cited commit creates child PKEY interfaces over netlink will multiple tx and rx queues, but some devices doesn't support more than 1 tx and 1 rx queues. This causes to a crash when traffic is sent over the PKEY interface due to the parent having a single queue but the child having multiple queues. This patch fixes the number of queues to 1 for legacy IPoIB at the earliest possible point in time. BUG: kernel NULL pointer dereference, address: 000000000000036b PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 4 PID: 209665 Comm: python3 Not tainted 6.1.0_for_upstream_min_debug_2022_12_12_17_02 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:kmem_cache_alloc+0xcb/0x450 Code: ce 7e 49 8b 50 08 49 83 78 10 00 4d 8b 28 0f 84 cb 02 00 00 4d 85 ed 0f 84 c2 02 00 00 41 8b 44 24 28 48 8d 4a 01 49 8b 3c 24 <49> 8b 5c 05 00 4c 89 e8 65 48 0f c7 0f 0f 94 c0 84 c0 74 b8 41 8b RSP: 0018:ffff88822acbbab8 EFLAGS: 00010202 RAX: 0000000000000070 RBX: ffff8881c28e3e00 RCX: 00000000064f8dae RDX: 00000000064f8dad RSI: 0000000000000a20 RDI: 0000000000030d00 RBP: 0000000000000a20 R08: ffff8882f5d30d00 R09: ffff888104032f40 R10: ffff88810fade828 R11: 736f6d6570736575 R12: ffff88810081c000 R13: 00000000000002fb R14: ffffffff817fc865 R15: 0000000000000000 FS: 00007f9324ff9700(0000) GS:ffff8882f5d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000036b CR3: 00000001125af004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_clone+0x55/0xd0 ip6_finish_output2+0x3fe/0x690 ip6_finish_output+0xfa/0x310 ip6_send_skb+0x1e/0x60 udp_v6_send_skb+0x1e5/0x420 udpv6_sendmsg+0xb3c/0xe60 ? ip_mc_finish_output+0x180/0x180 ? __switch_to_asm+0x3a/0x60 ? __switch_to_asm+0x34/0x60 sock_sendmsg+0x33/0x40 __sys_sendto+0x103/0x160 ? _copy_to_user+0x21/0x30 ? kvm_clock_get_cycles+0xd/0x10 ? ktime_get_ts64+0x49/0xe0 __x64_sys_sendto+0x25/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f9374f1ed14 Code: 42 41 f8 ff 44 8b 4c 24 2c 4c 8b 44 24 20 89 c5 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b 7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 34 89 ef 48 89 44 24 08 e8 68 41 f8 ff 48 8b RSP: 002b:00007f9324ff7bd0 EFLAGS: 00000293 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f9324ff7cc8 RCX: 00007f9374f1ed14 RDX: 00000000000002fb RSI: 00007f93000052f0 RDI: 0000000000000030 RBP: 0000000000000000 R08: 00007f9324ff7d40 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 000000012a05f200 R14: 0000000000000001 R15: 00007f9374d57bdc </TASK> |
| CVE-2023-52744 | In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix potential NULL-ptr-dereference in_dev_get() can return NULL which will cause a failure once idev is dereferenced in in_dev_for_each_ifa_rtnl(). This patch adds a check for NULL value in idev beforehand. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2023-52743 | In the Linux kernel, the following vulnerability has been resolved: ice: Do not use WQ_MEM_RECLAIM flag for workqueue When both ice and the irdma driver are loaded, a warning in check_flush_dependency is being triggered. This is due to ice driver workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one is not. According to kernel documentation, this flag should be set if the workqueue will be involved in the kernel's memory reclamation flow. Since it is not, there is no need for the ice driver's WQ to have this flag set so remove it. Example trace: [ +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0 [ +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel _rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1 0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_ core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ +0.000161] [last unloaded: bonding] [ +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1 [ +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ +0.000003] Workqueue: ice ice_service_task [ice] [ +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0 [ +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08 9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06 [ +0.000004] RSP: 0018:ffff88810a39f990 EFLAGS: 00010282 [ +0.000005] RAX: 0000000000000000 RBX: ffff888141bc2400 RCX: 0000000000000000 [ +0.000004] RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffa1213a80 [ +0.000003] RBP: ffff888194bf3400 R08: ffffed117b306112 R09: ffffed117b306112 [ +0.000003] R10: ffff888bd983088b R11: ffffed117b306111 R12: 0000000000000000 [ +0.000003] R13: ffff888111f84d00 R14: ffff88810a3943ac R15: ffff888194bf3400 [ +0.000004] FS: 0000000000000000(0000) GS:ffff888bd9800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000056035b208b60 CR3: 000000017795e005 CR4: 00000000007706f0 [ +0.000003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000003] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000002] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000002] <TASK> [ +0.000003] __flush_workqueue+0x203/0x840 [ +0.000006] ? mutex_unlock+0x84/0xd0 [ +0.000008] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? __pfx___flush_workqueue+0x10/0x10 [ +0.000006] ? mutex_lock+0xa3/0xf0 [ +0.000005] ib_cache_cleanup_one+0x39/0x190 [ib_core] [ +0.000174] __ib_unregister_device+0x84/0xf0 [ib_core] [ +0.000094] ib_unregister_device+0x25/0x30 [ib_core] [ +0.000093] irdma_ib_unregister_device+0x97/0xc0 [irdma] [ +0.000064] ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma] [ +0.000059] ? up_write+0x5c/0x90 [ +0.000005] irdma_remove+0x36/0x90 [irdma] [ +0.000062] auxiliary_bus_remove+0x32/0x50 [ +0.000007] device_r ---truncated--- |
| CVE-2023-52742 | In the Linux kernel, the following vulnerability has been resolved: net: USB: Fix wrong-direction WARNING in plusb.c The syzbot fuzzer detected a bug in the plusb network driver: A zero-length control-OUT transfer was treated as a read instead of a write. In modern kernels this error provokes a WARNING: usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0 WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Modules linked in: CPU: 1 PID: 4645 Comm: dhcpcd Not tainted 6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 ... Call Trace: <TASK> usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153 __usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010 usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068 pl_vendor_req drivers/net/usb/plusb.c:60 [inline] pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline] pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85 usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889 __dev_open+0x297/0x4d0 net/core/dev.c:1417 __dev_change_flags+0x587/0x750 net/core/dev.c:8530 dev_change_flags+0x97/0x170 net/core/dev.c:8602 devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147 inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979 sock_do_ioctl+0xcc/0x230 net/socket.c:1169 sock_ioctl+0x1f8/0x680 net/socket.c:1286 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and remove the USB_DIR_IN flag. |
| CVE-2023-52741 | In the Linux kernel, the following vulnerability has been resolved: cifs: Fix use-after-free in rdata->read_into_pages() When the network status is unstable, use-after-free may occur when read data from the server. BUG: KASAN: use-after-free in readpages_fill_pages+0x14c/0x7e0 Call Trace: <TASK> dump_stack_lvl+0x38/0x4c print_report+0x16f/0x4a6 kasan_report+0xb7/0x130 readpages_fill_pages+0x14c/0x7e0 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 </TASK> Allocated by task 2535: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 __kasan_kmalloc+0x82/0x90 cifs_readdata_direct_alloc+0x2c/0x110 cifs_readdata_alloc+0x2d/0x60 cifs_readahead+0x393/0xfe0 read_pages+0x12f/0x470 page_cache_ra_unbounded+0x1b1/0x240 filemap_get_pages+0x1c8/0x9a0 filemap_read+0x1c0/0x540 cifs_strict_readv+0x21b/0x240 vfs_read+0x395/0x4b0 ksys_read+0xb8/0x150 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 79: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2e/0x50 __kasan_slab_free+0x10e/0x1a0 __kmem_cache_free+0x7a/0x1a0 cifs_readdata_release+0x49/0x60 process_one_work+0x46c/0x760 worker_thread+0x2a4/0x6f0 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 Last potentially related work creation: kasan_save_stack+0x22/0x50 __kasan_record_aux_stack+0x95/0xb0 insert_work+0x2b/0x130 __queue_work+0x1fe/0x660 queue_work_on+0x4b/0x60 smb2_readv_callback+0x396/0x800 cifs_abort_connection+0x474/0x6a0 cifs_reconnect+0x5cb/0xa50 cifs_readv_from_socket.cold+0x22/0x6c cifs_read_page_from_socket+0xc1/0x100 readpages_fill_pages.cold+0x2f/0x46 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 The following function calls will cause UAF of the rdata pointer. readpages_fill_pages cifs_read_page_from_socket cifs_readv_from_socket cifs_reconnect __cifs_reconnect cifs_abort_connection mid->callback() --> smb2_readv_callback queue_work(&rdata->work) # if the worker completes first, # the rdata is freed cifs_readv_complete kref_put cifs_readdata_release kfree(rdata) return rdata->... # UAF in readpages_fill_pages() Similarly, this problem also occurs in the uncache_fill_pages(). Fix this by adjusts the order of condition judgment in the return statement. |
| CVE-2023-52740 | In the Linux kernel, the following vulnerability has been resolved: powerpc/64s/interrupt: Fix interrupt exit race with security mitigation switch The RFI and STF security mitigation options can flip the interrupt_exit_not_reentrant static branch condition concurrently with the interrupt exit code which tests that branch. Interrupt exit tests this condition to set MSR[EE|RI] for exit, then again in the case a soft-masked interrupt is found pending, to recover the MSR so the interrupt can be replayed before attempting to exit again. If the condition changes between these two tests, the MSR and irq soft-mask state will become corrupted, leading to warnings and possible crashes. For example, if the branch is initially true then false, MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get enabled, leading to warnings in irq_64.c. |
| CVE-2023-52739 | In the Linux kernel, the following vulnerability has been resolved: Fix page corruption caused by racy check in __free_pages When we upgraded our kernel, we started seeing some page corruption like the following consistently: BUG: Bad page state in process ganesha.nfsd pfn:1304ca page:0000000022261c55 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x1304ca flags: 0x17ffffc0000000() raw: 0017ffffc0000000 ffff8a513ffd4c98 ffffeee24b35ec08 0000000000000000 raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000 page dumped because: nonzero mapcount CPU: 0 PID: 15567 Comm: ganesha.nfsd Kdump: loaded Tainted: P B O 5.10.158-1.nutanix.20221209.el7.x86_64 #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016 Call Trace: dump_stack+0x74/0x96 bad_page.cold+0x63/0x94 check_new_page_bad+0x6d/0x80 rmqueue+0x46e/0x970 get_page_from_freelist+0xcb/0x3f0 ? _cond_resched+0x19/0x40 __alloc_pages_nodemask+0x164/0x300 alloc_pages_current+0x87/0xf0 skb_page_frag_refill+0x84/0x110 ... Sometimes, it would also show up as corruption in the free list pointer and cause crashes. After bisecting the issue, we found the issue started from commit e320d3012d25 ("mm/page_alloc.c: fix freeing non-compound pages"): if (put_page_testzero(page)) free_the_page(page, order); else if (!PageHead(page)) while (order-- > 0) free_the_page(page + (1 << order), order); So the problem is the check PageHead is racy because at this point we already dropped our reference to the page. So even if we came in with compound page, the page can already be freed and PageHead can return false and we will end up freeing all the tail pages causing double free. |
| CVE-2023-52738 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/fence: Fix oops due to non-matching drm_sched init/fini Currently amdgpu calls drm_sched_fini() from the fence driver sw fini routine - such function is expected to be called only after the respective init function - drm_sched_init() - was executed successfully. Happens that we faced a driver probe failure in the Steam Deck recently, and the function drm_sched_fini() was called even without its counter-part had been previously called, causing the following oops: amdgpu: probe of 0000:04:00.0 failed with error -110 BUG: kernel NULL pointer dereference, address: 0000000000000090 PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 609 Comm: systemd-udevd Not tainted 6.2.0-rc3-gpiccoli #338 Hardware name: Valve Jupiter/Jupiter, BIOS F7A0113 11/04/2022 RIP: 0010:drm_sched_fini+0x84/0xa0 [gpu_sched] [...] Call Trace: <TASK> amdgpu_fence_driver_sw_fini+0xc8/0xd0 [amdgpu] amdgpu_device_fini_sw+0x2b/0x3b0 [amdgpu] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] devm_drm_dev_init_release+0x49/0x70 [...] To prevent that, check if the drm_sched was properly initialized for a given ring before calling its fini counter-part. Notice ideally we'd use sched.ready for that; such field is set as the latest thing on drm_sched_init(). But amdgpu seems to "override" the meaning of such field - in the above oops for example, it was a GFX ring causing the crash, and the sched.ready field was set to true in the ring init routine, regardless of the state of the DRM scheduler. Hence, we ended-up using sched.ops as per Christian's suggestion [0], and also removed the no_scheduler check [1]. [0] https://lore.kernel.org/amd-gfx/[email protected]/ [1] https://lore.kernel.org/amd-gfx/[email protected]/ |
| CVE-2023-52737 | In the Linux kernel, the following vulnerability has been resolved: btrfs: lock the inode in shared mode before starting fiemap Currently fiemap does not take the inode's lock (VFS lock), it only locks a file range in the inode's io tree. This however can lead to a deadlock if we have a concurrent fsync on the file and fiemap code triggers a fault when accessing the user space buffer with fiemap_fill_next_extent(). The deadlock happens on the inode's i_mmap_lock semaphore, which is taken both by fsync and btrfs_page_mkwrite(). This deadlock was recently reported by syzbot and triggers a trace like the following: task:syz-executor361 state:D stack:20264 pid:5668 ppid:5119 flags:0x00004004 Call Trace: <TASK> context_switch kernel/sched/core.c:5293 [inline] __schedule+0x995/0xe20 kernel/sched/core.c:6606 schedule+0xcb/0x190 kernel/sched/core.c:6682 wait_on_state fs/btrfs/extent-io-tree.c:707 [inline] wait_extent_bit+0x577/0x6f0 fs/btrfs/extent-io-tree.c:751 lock_extent+0x1c2/0x280 fs/btrfs/extent-io-tree.c:1742 find_lock_delalloc_range+0x4e6/0x9c0 fs/btrfs/extent_io.c:488 writepage_delalloc+0x1ef/0x540 fs/btrfs/extent_io.c:1863 __extent_writepage+0x736/0x14e0 fs/btrfs/extent_io.c:2174 extent_write_cache_pages+0x983/0x1220 fs/btrfs/extent_io.c:3091 extent_writepages+0x219/0x540 fs/btrfs/extent_io.c:3211 do_writepages+0x3c3/0x680 mm/page-writeback.c:2581 filemap_fdatawrite_wbc+0x11e/0x170 mm/filemap.c:388 __filemap_fdatawrite_range mm/filemap.c:421 [inline] filemap_fdatawrite_range+0x175/0x200 mm/filemap.c:439 btrfs_fdatawrite_range fs/btrfs/file.c:3850 [inline] start_ordered_ops fs/btrfs/file.c:1737 [inline] btrfs_sync_file+0x4ff/0x1190 fs/btrfs/file.c:1839 generic_write_sync include/linux/fs.h:2885 [inline] btrfs_do_write_iter+0xcd3/0x1280 fs/btrfs/file.c:1684 call_write_iter include/linux/fs.h:2189 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f7d4054e9b9 RSP: 002b:00007f7d404fa2f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f7d405d87a0 RCX: 00007f7d4054e9b9 RDX: 0000000000000090 RSI: 0000000020000000 RDI: 0000000000000006 RBP: 00007f7d405a51d0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 61635f65646f6e69 R13: 65646f7475616f6e R14: 7261637369646f6e R15: 00007f7d405d87a8 </TASK> INFO: task syz-executor361:5697 blocked for more than 145 seconds. Not tainted 6.2.0-rc3-syzkaller-00376-g7c6984405241 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor361 state:D stack:21216 pid:5697 ppid:5119 flags:0x00004004 Call Trace: <TASK> context_switch kernel/sched/core.c:5293 [inline] __schedule+0x995/0xe20 kernel/sched/core.c:6606 schedule+0xcb/0x190 kernel/sched/core.c:6682 rwsem_down_read_slowpath+0x5f9/0x930 kernel/locking/rwsem.c:1095 __down_read_common+0x54/0x2a0 kernel/locking/rwsem.c:1260 btrfs_page_mkwrite+0x417/0xc80 fs/btrfs/inode.c:8526 do_page_mkwrite+0x19e/0x5e0 mm/memory.c:2947 wp_page_shared+0x15e/0x380 mm/memory.c:3295 handle_pte_fault mm/memory.c:4949 [inline] __handle_mm_fault mm/memory.c:5073 [inline] handle_mm_fault+0x1b79/0x26b0 mm/memory.c:5219 do_user_addr_fault+0x69b/0xcb0 arch/x86/mm/fault.c:1428 handle_page_fault arch/x86/mm/fault.c:1519 [inline] exc_page_fault+0x7a/0x110 arch/x86/mm/fault.c:1575 asm_exc_page_fault+0x22/0x30 arch/x86/include/asm/idtentry.h:570 RIP: 0010:copy_user_short_string+0xd/0x40 arch/x86/lib/copy_user_64.S:233 Code: 74 0a 89 (...) RSP: 0018:ffffc9000570f330 EFLAGS: 000502 ---truncated--- |
| CVE-2023-52736 | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Do not unset preset when cleaning up codec Several functions that take part in codec's initialization and removal are re-used by ASoC codec drivers implementations. Drivers mimic the behavior of hda_codec_driver_probe/remove() found in sound/pci/hda/hda_bind.c with their component->probe/remove() instead. One of the reasons for that is the expectation of snd_hda_codec_device_new() to receive a valid pointer to an instance of struct snd_card. This expectation can be met only once sound card components probing commences. As ASoC sound card may be unbound without codec device being actually removed from the system, unsetting ->preset in snd_hda_codec_cleanup_for_unbind() interferes with module unload -> load scenario causing null-ptr-deref. Preset is assigned only once, during device/driver matching whereas ASoC codec driver's module reloading may occur several times throughout the lifetime of an audio stack. |
| CVE-2023-52735 | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Don't let sock_map_{close,destroy,unhash} call itself sock_map proto callbacks should never call themselves by design. Protect against bugs like [1] and break out of the recursive loop to avoid a stack overflow in favor of a resource leak. [1] https://lore.kernel.org/all/[email protected]/ |
| CVE-2023-52733 | In the Linux kernel, the following vulnerability has been resolved: s390/decompressor: specify __decompress() buf len to avoid overflow Historically calls to __decompress() didn't specify "out_len" parameter on many architectures including s390, expecting that no writes beyond uncompressed kernel image are performed. This has changed since commit 2aa14b1ab2c4 ("zstd: import usptream v1.5.2") which includes zstd library commit 6a7ede3dfccb ("Reduce size of dctx by reutilizing dst buffer (#2751)"). Now zstd decompression code might store literal buffer in the unwritten portion of the destination buffer. Since "out_len" is not set, it is considered to be unlimited and hence free to use for optimization needs. On s390 this might corrupt initrd or ipl report which are often placed right after the decompressor buffer. Luckily the size of uncompressed kernel image is already known to the decompressor, so to avoid the problem simply specify it in the "out_len" parameter. |
| CVE-2023-52732 | In the Linux kernel, the following vulnerability has been resolved: ceph: blocklist the kclient when receiving corrupted snap trace When received corrupted snap trace we don't know what exactly has happened in MDS side. And we shouldn't continue IOs and metadatas access to MDS, which may corrupt or get incorrect contents. This patch will just block all the further IO/MDS requests immediately and then evict the kclient itself. The reason why we still need to evict the kclient just after blocking all the further IOs is that the MDS could revoke the caps faster. |
| CVE-2023-52731 | In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix invalid page access after closing deferred I/O devices When a fbdev with deferred I/O is once opened and closed, the dirty pages still remain queued in the pageref list, and eventually later those may be processed in the delayed work. This may lead to a corruption of pages, hitting an Oops. This patch makes sure to cancel the delayed work and clean up the pageref list at closing the device for addressing the bug. A part of the cleanup code is factored out as a new helper function that is called from the common fb_release(). |
| CVE-2023-52730 | In the Linux kernel, the following vulnerability has been resolved: mmc: sdio: fix possible resource leaks in some error paths If sdio_add_func() or sdio_init_func() fails, sdio_remove_func() can not release the resources, because the sdio function is not presented in these two cases, it won't call of_node_put() or put_device(). To fix these leaks, make sdio_func_present() only control whether device_del() needs to be called or not, then always call of_node_put() and put_device(). In error case in sdio_init_func(), the reference of 'card->dev' is not get, to avoid redundant put in sdio_free_func_cis(), move the get_device() to sdio_alloc_func() and put_device() to sdio_release_func(), it can keep the get/put function be balanced. Without this patch, while doing fault inject test, it can get the following leak reports, after this fix, the leak is gone. unreferenced object 0xffff888112514000 (size 2048): comm "kworker/3:2", pid 65, jiffies 4294741614 (age 124.774s) hex dump (first 32 bytes): 00 e0 6f 12 81 88 ff ff 60 58 8d 06 81 88 ff ff ..o.....`X...... 10 40 51 12 81 88 ff ff 10 40 51 12 81 88 ff ff .@Q......@Q..... backtrace: [<000000009e5931da>] kmalloc_trace+0x21/0x110 [<000000002f839ccb>] mmc_alloc_card+0x38/0xb0 [mmc_core] [<0000000004adcbf6>] mmc_sdio_init_card+0xde/0x170 [mmc_core] [<000000007538fea0>] mmc_attach_sdio+0xcb/0x1b0 [mmc_core] [<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core] unreferenced object 0xffff888112511000 (size 2048): comm "kworker/3:2", pid 65, jiffies 4294741623 (age 124.766s) hex dump (first 32 bytes): 00 40 51 12 81 88 ff ff e0 58 8d 06 81 88 ff ff [email protected]...... 10 10 51 12 81 88 ff ff 10 10 51 12 81 88 ff ff ..Q.......Q..... backtrace: [<000000009e5931da>] kmalloc_trace+0x21/0x110 [<00000000fcbe706c>] sdio_alloc_func+0x35/0x100 [mmc_core] [<00000000c68f4b50>] mmc_attach_sdio.cold.18+0xb1/0x395 [mmc_core] [<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core] |
| CVE-2023-52708 | In the Linux kernel, the following vulnerability has been resolved: mmc: mmc_spi: fix error handling in mmc_spi_probe() If mmc_add_host() fails, it doesn't need to call mmc_remove_host(), or it will cause null-ptr-deref, because of deleting a not added device in mmc_remove_host(). To fix this, goto label 'fail_glue_init', if mmc_add_host() fails, and change the label 'fail_add_host' to 'fail_gpiod_request'. |
| CVE-2023-52707 | In the Linux kernel, the following vulnerability has been resolved: sched/psi: Fix use-after-free in ep_remove_wait_queue() If a non-root cgroup gets removed when there is a thread that registered trigger and is polling on a pressure file within the cgroup, the polling waitqueue gets freed in the following path: do_rmdir cgroup_rmdir kernfs_drain_open_files cgroup_file_release cgroup_pressure_release psi_trigger_destroy However, the polling thread still has a reference to the pressure file and will access the freed waitqueue when the file is closed or upon exit: fput ep_eventpoll_release ep_free ep_remove_wait_queue remove_wait_queue This results in use-after-free as pasted below. The fundamental problem here is that cgroup_file_release() (and consequently waitqueue's lifetime) is not tied to the file's real lifetime. Using wake_up_pollfree() here might be less than ideal, but it is in line with the comment at commit 42288cb44c4b ("wait: add wake_up_pollfree()") since the waitqueue's lifetime is not tied to file's one and can be considered as another special case. While this would be fixable by somehow making cgroup_file_release() be tied to the fput(), it would require sizable refactoring at cgroups or higher layer which might be more justifiable if we identify more cases like this. BUG: KASAN: use-after-free in _raw_spin_lock_irqsave+0x60/0xc0 Write of size 4 at addr ffff88810e625328 by task a.out/4404 CPU: 19 PID: 4404 Comm: a.out Not tainted 6.2.0-rc6 #38 Hardware name: Amazon EC2 c5a.8xlarge/, BIOS 1.0 10/16/2017 Call Trace: <TASK> dump_stack_lvl+0x73/0xa0 print_report+0x16c/0x4e0 kasan_report+0xc3/0xf0 kasan_check_range+0x2d2/0x310 _raw_spin_lock_irqsave+0x60/0xc0 remove_wait_queue+0x1a/0xa0 ep_free+0x12c/0x170 ep_eventpoll_release+0x26/0x30 __fput+0x202/0x400 task_work_run+0x11d/0x170 do_exit+0x495/0x1130 do_group_exit+0x100/0x100 get_signal+0xd67/0xde0 arch_do_signal_or_restart+0x2a/0x2b0 exit_to_user_mode_prepare+0x94/0x100 syscall_exit_to_user_mode+0x20/0x40 do_syscall_64+0x52/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Allocated by task 4404: kasan_set_track+0x3d/0x60 __kasan_kmalloc+0x85/0x90 psi_trigger_create+0x113/0x3e0 pressure_write+0x146/0x2e0 cgroup_file_write+0x11c/0x250 kernfs_fop_write_iter+0x186/0x220 vfs_write+0x3d8/0x5c0 ksys_write+0x90/0x110 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 4407: kasan_set_track+0x3d/0x60 kasan_save_free_info+0x27/0x40 ____kasan_slab_free+0x11d/0x170 slab_free_freelist_hook+0x87/0x150 __kmem_cache_free+0xcb/0x180 psi_trigger_destroy+0x2e8/0x310 cgroup_file_release+0x4f/0xb0 kernfs_drain_open_files+0x165/0x1f0 kernfs_drain+0x162/0x1a0 __kernfs_remove+0x1fb/0x310 kernfs_remove_by_name_ns+0x95/0xe0 cgroup_addrm_files+0x67f/0x700 cgroup_destroy_locked+0x283/0x3c0 cgroup_rmdir+0x29/0x100 kernfs_iop_rmdir+0xd1/0x140 vfs_rmdir+0xfe/0x240 do_rmdir+0x13d/0x280 __x64_sys_rmdir+0x2c/0x30 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| CVE-2023-52706 | In the Linux kernel, the following vulnerability has been resolved: gpio: sim: fix a memory leak Fix an inverted logic bug in gpio_sim_remove_hogs() that leads to GPIO hog structures never being freed. |
| CVE-2023-52705 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix underflow in second superblock position calculations Macro NILFS_SB2_OFFSET_BYTES, which computes the position of the second superblock, underflows when the argument device size is less than 4096 bytes. Therefore, when using this macro, it is necessary to check in advance that the device size is not less than a lower limit, or at least that underflow does not occur. The current nilfs2 implementation lacks this check, causing out-of-bound block access when mounting devices smaller than 4096 bytes: I/O error, dev loop0, sector 36028797018963960 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 NILFS (loop0): unable to read secondary superblock (blocksize = 1024) In addition, when trying to resize the filesystem to a size below 4096 bytes, this underflow occurs in nilfs_resize_fs(), passing a huge number of segments to nilfs_sufile_resize(), corrupting parameters such as the number of segments in superblocks. This causes excessive loop iterations in nilfs_sufile_resize() during a subsequent resize ioctl, causing semaphore ns_segctor_sem to block for a long time and hang the writer thread: INFO: task segctord:5067 blocked for more than 143 seconds. Not tainted 6.2.0-rc8-syzkaller-00015-gf6feea56f66d #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:segctord state:D stack:23456 pid:5067 ppid:2 flags:0x00004000 Call Trace: <TASK> context_switch kernel/sched/core.c:5293 [inline] __schedule+0x1409/0x43f0 kernel/sched/core.c:6606 schedule+0xc3/0x190 kernel/sched/core.c:6682 rwsem_down_write_slowpath+0xfcf/0x14a0 kernel/locking/rwsem.c:1190 nilfs_transaction_lock+0x25c/0x4f0 fs/nilfs2/segment.c:357 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2486 [inline] nilfs_segctor_thread+0x52f/0x1140 fs/nilfs2/segment.c:2570 kthread+0x270/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> ... Call Trace: <TASK> folio_mark_accessed+0x51c/0xf00 mm/swap.c:515 __nilfs_get_page_block fs/nilfs2/page.c:42 [inline] nilfs_grab_buffer+0x3d3/0x540 fs/nilfs2/page.c:61 nilfs_mdt_submit_block+0xd7/0x8f0 fs/nilfs2/mdt.c:121 nilfs_mdt_read_block+0xeb/0x430 fs/nilfs2/mdt.c:176 nilfs_mdt_get_block+0x12d/0xbb0 fs/nilfs2/mdt.c:251 nilfs_sufile_get_segment_usage_block fs/nilfs2/sufile.c:92 [inline] nilfs_sufile_truncate_range fs/nilfs2/sufile.c:679 [inline] nilfs_sufile_resize+0x7a3/0x12b0 fs/nilfs2/sufile.c:777 nilfs_resize_fs+0x20c/0xed0 fs/nilfs2/super.c:422 nilfs_ioctl_resize fs/nilfs2/ioctl.c:1033 [inline] nilfs_ioctl+0x137c/0x2440 fs/nilfs2/ioctl.c:1301 ... This fixes these issues by inserting appropriate minimum device size checks or anti-underflow checks, depending on where the macro is used. |
| CVE-2023-52704 | In the Linux kernel, the following vulnerability has been resolved: freezer,umh: Fix call_usermode_helper_exec() vs SIGKILL Tetsuo-San noted that commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic") broke call_usermodehelper_exec() for the KILLABLE case. Specifically it was missed that the second, unconditional, wait_for_completion() was not optional and ensures the on-stack completion is unused before going out-of-scope. |
| CVE-2023-52703 | In the Linux kernel, the following vulnerability has been resolved: net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path syzbot reported that act_len in kalmia_send_init_packet() is uninitialized when passing it to the first usb_bulk_msg error path. Jiri Pirko noted that it's pointless to pass it in the error path, and that the value that would be printed in the second error path would be the value of act_len from the first call to usb_bulk_msg.[1] With this in mind, let's just not pass act_len to the usb_bulk_msg error paths. 1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/ |
| CVE-2023-52702 | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix possible memory leak in ovs_meter_cmd_set() old_meter needs to be free after it is detached regardless of whether the new meter is successfully attached. |
| CVE-2023-52701 | In the Linux kernel, the following vulnerability has been resolved: net: use a bounce buffer for copying skb->mark syzbot found arm64 builds would crash in sock_recv_mark() when CONFIG_HARDENED_USERCOPY=y x86 and powerpc are not detecting the issue because they define user_access_begin. This will be handled in a different patch, because a check_object_size() is missing. Only data from skb->cb[] can be copied directly to/from user space, as explained in commit 79a8a642bf05 ("net: Whitelist the skbuff_head_cache "cb" field") syzbot report was: usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_head_cache' (offset 168, size 4)! ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:102 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 4410 Comm: syz-executor533 Not tainted 6.2.0-rc7-syzkaller-17907-g2d3827b3f393 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usercopy_abort+0x90/0x94 mm/usercopy.c:90 lr : usercopy_abort+0x90/0x94 mm/usercopy.c:90 sp : ffff80000fb9b9a0 x29: ffff80000fb9b9b0 x28: ffff0000c6073400 x27: 0000000020001a00 x26: 0000000000000014 x25: ffff80000cf52000 x24: fffffc0000000000 x23: 05ffc00000000200 x22: fffffc000324bf80 x21: ffff0000c92fe1a8 x20: 0000000000000001 x19: 0000000000000004 x18: 0000000000000000 x17: 656a626f2042554c x16: ffff0000c6073dd0 x15: ffff80000dbd2118 x14: ffff0000c6073400 x13: 00000000ffffffff x12: ffff0000c6073400 x11: ff808000081bbb4c x10: 0000000000000000 x9 : 7b0572d7cc0ccf00 x8 : 7b0572d7cc0ccf00 x7 : ffff80000bf650d4 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0001fefbff08 x1 : 0000000100000000 x0 : 000000000000006c Call trace: usercopy_abort+0x90/0x94 mm/usercopy.c:90 __check_heap_object+0xa8/0x100 mm/slub.c:4761 check_heap_object mm/usercopy.c:196 [inline] __check_object_size+0x208/0x6b8 mm/usercopy.c:251 check_object_size include/linux/thread_info.h:199 [inline] __copy_to_user include/linux/uaccess.h:115 [inline] put_cmsg+0x408/0x464 net/core/scm.c:238 sock_recv_mark net/socket.c:975 [inline] __sock_recv_cmsgs+0x1fc/0x248 net/socket.c:984 sock_recv_cmsgs include/net/sock.h:2728 [inline] packet_recvmsg+0x2d8/0x678 net/packet/af_packet.c:3482 ____sys_recvmsg+0x110/0x3a0 ___sys_recvmsg net/socket.c:2737 [inline] __sys_recvmsg+0x194/0x210 net/socket.c:2767 __do_sys_recvmsg net/socket.c:2777 [inline] __se_sys_recvmsg net/socket.c:2774 [inline] __arm64_sys_recvmsg+0x2c/0x3c net/socket.c:2774 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x64/0x178 arch/arm64/kernel/syscall.c:52 el0_svc_common+0xbc/0x180 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x48/0x110 arch/arm64/kernel/syscall.c:193 el0_svc+0x58/0x14c arch/arm64/kernel/entry-common.c:637 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: 91388800 aa0903e1 f90003e8 94e6d752 (d4210000) |
| CVE-2023-52700 | In the Linux kernel, the following vulnerability has been resolved: tipc: fix kernel warning when sending SYN message When sending a SYN message, this kernel stack trace is observed: ... [ 13.396352] RIP: 0010:_copy_from_iter+0xb4/0x550 ... [ 13.398494] Call Trace: [ 13.398630] <TASK> [ 13.398630] ? __alloc_skb+0xed/0x1a0 [ 13.398630] tipc_msg_build+0x12c/0x670 [tipc] [ 13.398630] ? shmem_add_to_page_cache.isra.71+0x151/0x290 [ 13.398630] __tipc_sendmsg+0x2d1/0x710 [tipc] [ 13.398630] ? tipc_connect+0x1d9/0x230 [tipc] [ 13.398630] ? __local_bh_enable_ip+0x37/0x80 [ 13.398630] tipc_connect+0x1d9/0x230 [tipc] [ 13.398630] ? __sys_connect+0x9f/0xd0 [ 13.398630] __sys_connect+0x9f/0xd0 [ 13.398630] ? preempt_count_add+0x4d/0xa0 [ 13.398630] ? fpregs_assert_state_consistent+0x22/0x50 [ 13.398630] __x64_sys_connect+0x16/0x20 [ 13.398630] do_syscall_64+0x42/0x90 [ 13.398630] entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because commit a41dad905e5a ("iov_iter: saner checks for attempt to copy to/from iterator") has introduced sanity check for copying from/to iov iterator. Lacking of copy direction from the iterator viewpoint would lead to kernel stack trace like above. This commit fixes this issue by initializing the iov iterator with the correct copy direction when sending SYN or ACK without data. |
| CVE-2023-52699 | In the Linux kernel, the following vulnerability has been resolved: sysv: don't call sb_bread() with pointers_lock held syzbot is reporting sleep in atomic context in SysV filesystem [1], for sb_bread() is called with rw_spinlock held. A "write_lock(&pointers_lock) => read_lock(&pointers_lock) deadlock" bug and a "sb_bread() with write_lock(&pointers_lock)" bug were introduced by "Replace BKL for chain locking with sysvfs-private rwlock" in Linux 2.5.12. Then, "[PATCH] err1-40: sysvfs locking fix" in Linux 2.6.8 fixed the former bug by moving pointers_lock lock to the callers, but instead introduced a "sb_bread() with read_lock(&pointers_lock)" bug (which made this problem easier to hit). Al Viro suggested that why not to do like get_branch()/get_block()/ find_shared() in Minix filesystem does. And doing like that is almost a revert of "[PATCH] err1-40: sysvfs locking fix" except that get_branch() from with find_shared() is called without write_lock(&pointers_lock). |
| CVE-2023-52698 | In the Linux kernel, the following vulnerability has been resolved: calipso: fix memory leak in netlbl_calipso_add_pass() If IPv6 support is disabled at boot (ipv6.disable=1), the calipso_init() -> netlbl_calipso_ops_register() function isn't called, and the netlbl_calipso_ops_get() function always returns NULL. In this case, the netlbl_calipso_add_pass() function allocates memory for the doi_def variable but doesn't free it with the calipso_doi_free(). BUG: memory leak unreferenced object 0xffff888011d68180 (size 64): comm "syz-executor.1", pid 10746, jiffies 4295410986 (age 17.928s) hex dump (first 32 bytes): 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<...>] kmalloc include/linux/slab.h:552 [inline] [<...>] netlbl_calipso_add_pass net/netlabel/netlabel_calipso.c:76 [inline] [<...>] netlbl_calipso_add+0x22e/0x4f0 net/netlabel/netlabel_calipso.c:111 [<...>] genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739 [<...>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] [<...>] genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800 [<...>] netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2515 [<...>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:811 [<...>] netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] [<...>] netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1339 [<...>] netlink_sendmsg+0x90a/0xdf0 net/netlink/af_netlink.c:1934 [<...>] sock_sendmsg_nosec net/socket.c:651 [inline] [<...>] sock_sendmsg+0x157/0x190 net/socket.c:671 [<...>] ____sys_sendmsg+0x712/0x870 net/socket.c:2342 [<...>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2396 [<...>] __sys_sendmsg+0xea/0x1b0 net/socket.c:2429 [<...>] do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 [<...>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller [PM: merged via the LSM tree at Jakub Kicinski request] |
| CVE-2023-52697 | In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof_sdw_rt_sdca_jack_common: ctx->headset_codec_dev = NULL sof_sdw_rt_sdca_jack_exit() are used by different codecs, and some of them use the same dai name. For example, rt712 and rt713 both use "rt712-sdca-aif1" and sof_sdw_rt_sdca_jack_exit(). As a result, sof_sdw_rt_sdca_jack_exit() will be called twice by mc_dailink_exit_loop(). Set ctx->headset_codec_dev = NULL; after put_device(ctx->headset_codec_dev); to avoid ctx->headset_codec_dev being put twice. |
| CVE-2023-52696 | In the Linux kernel, the following vulnerability has been resolved: powerpc/powernv: Add a null pointer check in opal_powercap_init() kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. |
| CVE-2023-52695 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check writeback connectors in create_validate_stream_for_sink [WHY & HOW] This is to check connector type to avoid unhandled null pointer for writeback connectors. |
| CVE-2023-52694 | In the Linux kernel, the following vulnerability has been resolved: drm/bridge: tpd12s015: Drop buggy __exit annotation for remove function With tpd12s015_remove() marked with __exit this function is discarded when the driver is compiled as a built-in. The result is that when the driver unbinds there is no cleanup done which results in resource leakage or worse. |
| CVE-2023-52693 | In the Linux kernel, the following vulnerability has been resolved: ACPI: video: check for error while searching for backlight device parent If acpi_get_parent() called in acpi_video_dev_register_backlight() fails, for example, because acpi_ut_acquire_mutex() fails inside acpi_get_parent), this can lead to incorrect (uninitialized) acpi_parent handle being passed to acpi_get_pci_dev() for detecting the parent pci device. Check acpi_get_parent() result and set parent device only in case of success. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2023-52692 | In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Add missing error check to scarlett2_usb_set_config() scarlett2_usb_set_config() calls scarlett2_usb_get() but was not checking the result. Return the error if it fails rather than continuing with an invalid value. |
| CVE-2023-52691 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix a double-free in si_dpm_init When the allocation of adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails, amdgpu_free_extended_power_table is called to free some fields of adev. However, when the control flow returns to si_dpm_sw_init, it goes to label dpm_failed and calls si_dpm_fini, which calls amdgpu_free_extended_power_table again and free those fields again. Thus a double-free is triggered. |
| CVE-2023-52690 | In the Linux kernel, the following vulnerability has been resolved: powerpc/powernv: Add a null pointer check to scom_debug_init_one() kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Add a null pointer check, and release 'ent' to avoid memory leaks. |
| CVE-2023-52689 | In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Add missing mutex lock around get meter levels As scarlett2_meter_ctl_get() uses meter_level_map[], the data_mutex should be locked while accessing it. |
| CVE-2023-52688 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix the error handler of rfkill config When the core rfkill config throws error, it should free the allocated resources. Currently it is not freeing the core pdev create resources. Avoid this issue by calling the core pdev destroy in the error handler of core rfkill config. Found this issue in the code review and it is compile tested only. |
| CVE-2023-52687 | In the Linux kernel, the following vulnerability has been resolved: crypto: safexcel - Add error handling for dma_map_sg() calls Macro dma_map_sg() may return 0 on error. This patch enables checks in case of the macro failure and ensures unmapping of previously mapped buffers with dma_unmap_sg(). Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. |
| CVE-2023-52686 | In the Linux kernel, the following vulnerability has been resolved: powerpc/powernv: Add a null pointer check in opal_event_init() kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. |
| CVE-2023-52684 | In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: qseecom: fix memory leaks in error paths Fix instances of returning error codes directly instead of jumping to the relevant labels where memory allocated for the SCM calls would be freed. |
| CVE-2023-52683 | In the Linux kernel, the following vulnerability has been resolved: ACPI: LPIT: Avoid u32 multiplication overflow In lpit_update_residency() there is a possibility of overflow in multiplication, if tsc_khz is large enough (> UINT_MAX/1000). Change multiplication to mul_u32_u32(). Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2023-52682 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to wait on block writeback for post_read case If inode is compressed, but not encrypted, it missed to call f2fs_wait_on_block_writeback() to wait for GCed page writeback in IPU write path. Thread A GC-Thread - f2fs_gc - do_garbage_collect - gc_data_segment - move_data_block - f2fs_submit_page_write migrate normal cluster's block via meta_inode's page cache - f2fs_write_single_data_page - f2fs_do_write_data_page - f2fs_inplace_write_data - f2fs_submit_page_bio IRQ - f2fs_read_end_io IRQ old data overrides new data due to out-of-order GC and common IO. - f2fs_read_end_io |
| CVE-2023-52681 | In the Linux kernel, the following vulnerability has been resolved: efivarfs: Free s_fs_info on unmount Now that we allocate a s_fs_info struct on fs context creation, we should ensure that we free it again when the superblock goes away. |
| CVE-2023-52680 | In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Add missing error checks to *_ctl_get() The *_ctl_get() functions which call scarlett2_update_*() were not checking the return value. Fix to check the return value and pass to the caller. |
| CVE-2023-52679 | In the Linux kernel, the following vulnerability has been resolved: of: Fix double free in of_parse_phandle_with_args_map In of_parse_phandle_with_args_map() the inner loop that iterates through the map entries calls of_node_put(new) to free the reference acquired by the previous iteration of the inner loop. This assumes that the value of "new" is NULL on the first iteration of the inner loop. Make sure that this is true in all iterations of the outer loop by setting "new" to NULL after its value is assigned to "cur". Extend the unittest to detect the double free and add an additional test case that actually triggers this path. |
| CVE-2023-52678 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c Before using list_first_entry, make sure to check that list is not empty, if list is empty return -ENODATA. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1347 kfd_create_indirect_link_prop() warn: can 'gpu_link' even be NULL? drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1428 kfd_add_peer_prop() warn: can 'iolink1' even be NULL? drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1433 kfd_add_peer_prop() warn: can 'iolink2' even be NULL? |
| CVE-2023-52677 | In the Linux kernel, the following vulnerability has been resolved: riscv: Check if the code to patch lies in the exit section Otherwise we fall through to vmalloc_to_page() which panics since the address does not lie in the vmalloc region. |
| CVE-2023-52676 | In the Linux kernel, the following vulnerability has been resolved: bpf: Guard stack limits against 32bit overflow This patch promotes the arithmetic around checking stack bounds to be done in the 64-bit domain, instead of the current 32bit. The arithmetic implies adding together a 64-bit register with a int offset. The register was checked to be below 1<<29 when it was variable, but not when it was fixed. The offset either comes from an instruction (in which case it is 16 bit), from another register (in which case the caller checked it to be below 1<<29 [1]), or from the size of an argument to a kfunc (in which case it can be a u32 [2]). Between the register being inconsistently checked to be below 1<<29, and the offset being up to an u32, it appears that we were open to overflowing the `int`s which were currently used for arithmetic. [1] https://github.com/torvalds/linux/blob/815fb87b753055df2d9e50f6cd80eb10235fe3e9/kernel/bpf/verifier.c#L7494-L7498 [2] https://github.com/torvalds/linux/blob/815fb87b753055df2d9e50f6cd80eb10235fe3e9/kernel/bpf/verifier.c#L11904 |
| CVE-2023-52675 | In the Linux kernel, the following vulnerability has been resolved: powerpc/imc-pmu: Add a null pointer check in update_events_in_group() kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. |
| CVE-2023-52674 | In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Add clamp() in scarlett2_mixer_ctl_put() Ensure the value passed to scarlett2_mixer_ctl_put() is between 0 and SCARLETT2_MIXER_MAX_VALUE so we don't attempt to access outside scarlett2_mixer_values[]. |
| CVE-2023-52673 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix a debugfs null pointer error [WHY & HOW] Check whether get_subvp_en() callback exists before calling it. |
| CVE-2023-52672 | In the Linux kernel, the following vulnerability has been resolved: pipe: wakeup wr_wait after setting max_usage Commit c73be61cede5 ("pipe: Add general notification queue support") a regression was introduced that would lock up resized pipes under certain conditions. See the reproducer in [1]. The commit resizing the pipe ring size was moved to a different function, doing that moved the wakeup for pipe->wr_wait before actually raising pipe->max_usage. If a pipe was full before the resize occured it would result in the wakeup never actually triggering pipe_write. Set @max_usage and @nr_accounted before waking writers if this isn't a watch queue. [Christian Brauner <[email protected]>: rewrite to account for watch queues] |
| CVE-2023-52671 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix hang/underflow when transitioning to ODM4:1 [Why] Under some circumstances, disabling an OPTC and attempting to reclaim its OPP(s) for a different OPTC could cause a hang/underflow due to OPPs not being properly disconnected from the disabled OPTC. [How] Ensure that all OPPs are unassigned from an OPTC when it gets disabled. |
| CVE-2023-52670 | In the Linux kernel, the following vulnerability has been resolved: rpmsg: virtio: Free driver_override when rpmsg_remove() Free driver_override when rpmsg_remove(), otherwise the following memory leak will occur: unreferenced object 0xffff0000d55d7080 (size 128): comm "kworker/u8:2", pid 56, jiffies 4294893188 (age 214.272s) hex dump (first 32 bytes): 72 70 6d 73 67 5f 6e 73 00 00 00 00 00 00 00 00 rpmsg_ns........ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000009c94c9c1>] __kmem_cache_alloc_node+0x1f8/0x320 [<000000002300d89b>] __kmalloc_node_track_caller+0x44/0x70 [<00000000228a60c3>] kstrndup+0x4c/0x90 [<0000000077158695>] driver_set_override+0xd0/0x164 [<000000003e9c4ea5>] rpmsg_register_device_override+0x98/0x170 [<000000001c0c89a8>] rpmsg_ns_register_device+0x24/0x30 [<000000008bbf8fa2>] rpmsg_probe+0x2e0/0x3ec [<00000000e65a68df>] virtio_dev_probe+0x1c0/0x280 [<00000000443331cc>] really_probe+0xbc/0x2dc [<00000000391064b1>] __driver_probe_device+0x78/0xe0 [<00000000a41c9a5b>] driver_probe_device+0xd8/0x160 [<000000009c3bd5df>] __device_attach_driver+0xb8/0x140 [<0000000043cd7614>] bus_for_each_drv+0x7c/0xd4 [<000000003b929a36>] __device_attach+0x9c/0x19c [<00000000a94e0ba8>] device_initial_probe+0x14/0x20 [<000000003c999637>] bus_probe_device+0xa0/0xac |
| CVE-2023-52669 | In the Linux kernel, the following vulnerability has been resolved: crypto: s390/aes - Fix buffer overread in CTR mode When processing the last block, the s390 ctr code will always read a whole block, even if there isn't a whole block of data left. Fix this by using the actual length left and copy it into a buffer first for processing. |
| CVE-2023-52668 | In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix lock ordering in btrfs_zone_activate() The btrfs CI reported a lockdep warning as follows by running generic generic/129. WARNING: possible circular locking dependency detected 6.7.0-rc5+ #1 Not tainted ------------------------------------------------------ kworker/u5:5/793427 is trying to acquire lock: ffff88813256d028 (&cache->lock){+.+.}-{2:2}, at: btrfs_zone_finish_one_bg+0x5e/0x130 but task is already holding lock: ffff88810a23a318 (&fs_info->zone_active_bgs_lock){+.+.}-{2:2}, at: btrfs_zone_finish_one_bg+0x34/0x130 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&fs_info->zone_active_bgs_lock){+.+.}-{2:2}: ... -> #0 (&cache->lock){+.+.}-{2:2}: ... This is because we take fs_info->zone_active_bgs_lock after a block_group's lock in btrfs_zone_activate() while doing the opposite in other places. Fix the issue by expanding the fs_info->zone_active_bgs_lock's critical section and taking it before a block_group's lock. |
| CVE-2023-52667 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix a potential double-free in fs_any_create_groups When kcalloc() for ft->g succeeds but kvzalloc() for in fails, fs_any_create_groups() will free ft->g. However, its caller fs_any_create_table() will free ft->g again through calling mlx5e_destroy_flow_table(), which will lead to a double-free. Fix this by setting ft->g to NULL in fs_any_create_groups(). |
| CVE-2023-52664 | In the Linux kernel, the following vulnerability has been resolved: net: atlantic: eliminate double free in error handling logic Driver has a logic leak in ring data allocation/free, where aq_ring_free could be called multiple times on same ring, if system is under stress and got memory allocation error. Ring pointer was used as an indicator of failure, but this is not correct since only ring data is allocated/deallocated. Ring itself is an array member. Changing ring allocation functions to return error code directly. This simplifies error handling and eliminates aq_ring_free on higher layer. |
| CVE-2023-52663 | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: amd: Fix memory leak in amd_sof_acp_probe() Driver uses kasprintf() to initialize fw_{code,data}_bin members of struct acp_dev_data, but kfree() is never called to deallocate the memory, which results in a memory leak. Fix the issue by switching to devm_kasprintf(). Additionally, ensure the allocation was successful by checking the pointer validity. |
| CVE-2023-52662 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: fix a memleak in vmw_gmrid_man_get_node When ida_alloc_max fails, resources allocated before should be freed, including *res allocated by kmalloc and ttm_resource_init. |
| CVE-2023-52661 | In the Linux kernel, the following vulnerability has been resolved: drm/tegra: rgb: Fix missing clk_put() in the error handling paths of tegra_dc_rgb_probe() If clk_get_sys(..., "pll_d2_out0") fails, the clk_get_sys() call must be undone. Add the missing clk_put and a new 'put_pll_d_out0' label in the error handling path, and use it. |
| CVE-2023-52660 | In the Linux kernel, the following vulnerability has been resolved: media: rkisp1: Fix IRQ handling due to shared interrupts The driver requests the interrupts as IRQF_SHARED, so the interrupt handlers can be called at any time. If such a call happens while the ISP is powered down, the SoC will hang as the driver tries to access the ISP registers. This can be reproduced even without the platform sharing the IRQ line: Enable CONFIG_DEBUG_SHIRQ and unload the driver, and the board will hang. Fix this by adding a new field, 'irqs_enabled', which is used to bail out from the interrupt handler when the ISP is not operational. |
| CVE-2023-52659 | In the Linux kernel, the following vulnerability has been resolved: x86/mm: Ensure input to pfn_to_kaddr() is treated as a 64-bit type On 64-bit platforms, the pfn_to_kaddr() macro requires that the input value is 64 bits in order to ensure that valid address bits don't get lost when shifting that input by PAGE_SHIFT to calculate the physical address to provide a virtual address for. One such example is in pvalidate_pages() (used by SEV-SNP guests), where the GFN in the struct used for page-state change requests is a 40-bit bit-field, so attempts to pass this GFN field directly into pfn_to_kaddr() ends up causing guest crashes when dealing with addresses above the 1TB range due to the above. Fix this issue with SEV-SNP guests, as well as any similar cases that might cause issues in current/future code, by using an inline function, instead of a macro, so that the input is implicitly cast to the expected 64-bit input type prior to performing the shift operation. While it might be argued that the issue is on the caller side, other archs/macros have taken similar approaches to deal with instances like this, such as ARM explicitly casting the input to phys_addr_t: e48866647b48 ("ARM: 8396/1: use phys_addr_t in pfn_to_kaddr()") A C inline function is even better though. [ mingo: Refined the changelog some more & added __always_inline. ] |
| CVE-2023-52658 | In the Linux kernel, the following vulnerability has been resolved: Revert "net/mlx5: Block entering switchdev mode with ns inconsistency" This reverts commit 662404b24a4c4d839839ed25e3097571f5938b9b. The revert is required due to the suspicion it is not good for anything and cause crash. |
| CVE-2023-52657 | In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amd/pm: resolve reboot exception for si oland" This reverts commit e490d60a2f76bff636c68ce4fe34c1b6c34bbd86. This causes hangs on SI when DC is enabled and errors on driver reboot and power off cycles. |
| CVE-2023-52656 | In the Linux kernel, the following vulnerability has been resolved: io_uring: drop any code related to SCM_RIGHTS This is dead code after we dropped support for passing io_uring fds over SCM_RIGHTS, get rid of it. |
| CVE-2023-52655 | In the Linux kernel, the following vulnerability has been resolved: usb: aqc111: check packet for fixup for true limit If a device sends a packet that is inbetween 0 and sizeof(u64) the value passed to skb_trim() as length will wrap around ending up as some very large value. The driver will then proceed to parse the header located at that position, which will either oops or process some random value. The fix is to check against sizeof(u64) rather than 0, which the driver currently does. The issue exists since the introduction of the driver. |
| CVE-2023-52654 | In the Linux kernel, the following vulnerability has been resolved: io_uring/af_unix: disable sending io_uring over sockets File reference cycles have caused lots of problems for io_uring in the past, and it still doesn't work exactly right and races with unix_stream_read_generic(). The safest fix would be to completely disallow sending io_uring files via sockets via SCM_RIGHT, so there are no possible cycles invloving registered files and thus rendering SCM accounting on the io_uring side unnecessary. |
| CVE-2023-52653 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix a memleak in gss_import_v2_context The ctx->mech_used.data allocated by kmemdup is not freed in neither gss_import_v2_context nor it only caller gss_krb5_import_sec_context, which frees ctx on error. Thus, this patch reform the last call of gss_import_v2_context to the gss_krb5_import_ctx_v2, preventing the memleak while keepping the return formation. |
| CVE-2023-52652 | In the Linux kernel, the following vulnerability has been resolved: NTB: fix possible name leak in ntb_register_device() If device_register() fails in ntb_register_device(), the device name allocated by dev_set_name() should be freed. As per the comment in device_register(), callers should use put_device() to give up the reference in the error path. So fix this by calling put_device() in the error path so that the name can be freed in kobject_cleanup(). As a result of this, put_device() in the error path of ntb_register_device() is removed and the actual error is returned. [mani: reworded commit message] |
| CVE-2023-52650 | In the Linux kernel, the following vulnerability has been resolved: drm/tegra: dsi: Add missing check for of_find_device_by_node Add check for the return value of of_find_device_by_node() and return the error if it fails in order to avoid NULL pointer dereference. |
| CVE-2023-52649 | In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Avoid reading beyond LUT array When the floor LUT index (drm_fixp2int(lut_index) is the last index of the array the ceil LUT index will point to an entry beyond the array. Make sure we guard against it and use the value of the floor LUT index. v3: - Drop bits from commit description that didn't contribute anything of value |
| CVE-2023-52648 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Unmap the surface before resetting it on a plane state Switch to a new plane state requires unreferencing of all held surfaces. In the work required for mob cursors the mapped surfaces started being cached but the variable indicating whether the surface is currently mapped was not being reset. This leads to crashes as the duplicated state, incorrectly, indicates the that surface is mapped even when no surface is present. That's because after unreferencing the surface it's perfectly possible for the plane to be backed by a bo instead of a surface. Reset the surface mapped flag when unreferencing the plane state surface to fix null derefs in cleanup. Fixes crashes in KDE KWin 6.0 on Wayland: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2533 Comm: kwin_wayland Not tainted 6.7.0-rc3-vmwgfx #2 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f> RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600 RBP: ffff969d4143dc50 R08: 0000000000000000 R09: ffffb6b98216f920 R10: 0000000000000003 R11: ffff969e7feb3b10 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000027b R15: ffff969d49c9fc00 FS: 00007f1e8f1b4180(0000) GS:ffff969e75f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000104006004 CR4: 00000000003706f0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] drm_atomic_helper_cleanup_planes+0x9b/0xc0 commit_tail+0xd1/0x130 drm_atomic_helper_commit+0x11a/0x140 drm_atomic_commit+0x97/0xd0 ? __pfx___drm_printfn_info+0x10/0x10 drm_atomic_helper_update_plane+0xf5/0x160 drm_mode_cursor_universal+0x10e/0x270 drm_mode_cursor_common+0x102/0x230 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10 drm_ioctl_kernel+0xb2/0x110 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10 ? __pfx_drm_ioctl+0x10/0x10 vmw_generic_ioctl+0xa4/0x110 [vmwgfx] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x61/0xe0 ? __x64_sys_ioctl+0xaf/0xd0 ? syscall_exit_to_user_mode+0x2b/0x40 ? do_syscall_64+0x70/0xe0 ? __x64_sys_ioctl+0xaf/0xd0 ? syscall_exit_to_user_mode+0x2b/0x40 ? do_syscall_64+0x70/0xe0 ? exc_page_fault+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f1e93f279ed Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff f> RSP: 002b:00007ffca0faf600 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055db876ed2c0 RCX: 00007f1e93f279ed RDX: 00007ffca0faf6c0 RSI: 00000000c02464bb RDI: 0000000000000015 RBP: 00007ffca0faf650 R08: 000055db87184010 R09: 0000000000000007 R10: 000055db886471a0 R11: 0000000000000246 R12: 00007ffca0faf6c0 R13: 00000000c02464bb R14: 0000000000000015 R15: 00007ffca0faf790 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_ine> CR2: 0000000000000028 ---[ end trace 0000000000000000 ]--- RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f> RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600 RBP: ffff969d4143 ---truncated--- |
| CVE-2023-52647 | In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Check whether crossbar pad is non-NULL before access When translating source to sink streams in the crossbar subdev, the driver tries to locate the remote subdev connected to the sink pad. The remote pad may be NULL, if userspace tries to enable a stream that ends at an unconnected crossbar sink. When that occurs, the driver dereferences the NULL pad, leading to a crash. Prevent the crash by checking if the pad is NULL before using it, and return an error if it is. |
| CVE-2023-52646 | In the Linux kernel, the following vulnerability has been resolved: aio: fix mremap after fork null-deref Commit e4a0d3e720e7 ("aio: Make it possible to remap aio ring") introduced a null-deref if mremap is called on an old aio mapping after fork as mm->ioctx_table will be set to NULL. [[email protected]: fix 80 column issue] |
| CVE-2023-52645 | In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: fix race conditions with genpd If the power domains are registered first with genpd and *after that* the driver attempts to power them on in the probe sequence, then it is possible that a race condition occurs if genpd tries to power them on in the same time. The same is valid for powering them off before unregistering them from genpd. Attempt to fix race conditions by first removing the domains from genpd and *after that* powering down domains. Also first power up the domains and *after that* register them to genpd. |
| CVE-2023-52644 | In the Linux kernel, the following vulnerability has been resolved: wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled When QoS is disabled, the queue priority value will not map to the correct ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS is disabled to prevent trying to stop/wake a non-existent queue and failing to stop/wake the actual queue instantiated. Log of issue before change (with kernel parameter qos=0): [ +5.112651] ------------[ cut here ]------------ [ +0.000005] WARNING: CPU: 7 PID: 25513 at net/mac80211/util.c:449 __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000067] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3 [ +0.000044] videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common [ +0.000055] usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43(O)] [ +0.000009] CPU: 7 PID: 25513 Comm: irq/17-b43 Tainted: G W O 6.6.7 #1-NixOS [ +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019 [ +0.000001] RIP: 0010:__ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000046] Code: 00 45 85 e4 0f 85 9b 00 00 00 48 8d bd 40 09 00 00 f0 48 0f ba ad 48 09 00 00 00 72 0f 5b 5d 41 5c 41 5d 41 5e e9 cb 6d 3c d0 <0f> 0b 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8d b4 16 94 00 00 [ +0.000002] RSP: 0018:ffffc90003c77d60 EFLAGS: 00010097 [ +0.000001] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000 [ +0.000001] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff88820b924900 [ +0.000002] RBP: ffff88820b924900 R08: ffffc90003c77d90 R09: 000000000003bfd0 [ +0.000001] R10: ffff88820b924900 R11: ffffc90003c77c68 R12: 0000000000000000 [ +0.000001] R13: 0000000000000000 R14: ffffc90003c77d90 R15: ffffffffc0fa6f40 [ +0.000001] FS: 0000000000000000(0000) GS:ffff88846fb80000(0000) knlGS:0000000000000000 [ +0.000001] CS: 0010 DS: 0 ---truncated--- |
| CVE-2023-52643 | In the Linux kernel, the following vulnerability has been resolved: iio: core: fix memleak in iio_device_register_sysfs When iio_device_register_sysfs_group() fails, we should free iio_dev_opaque->chan_attr_group.attrs to prevent potential memleak. |
| CVE-2023-52642 | In the Linux kernel, the following vulnerability has been resolved: media: rc: bpf attach/detach requires write permission Note that bpf attach/detach also requires CAP_NET_ADMIN. |
| CVE-2023-52641 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add NULL ptr dereference checking at the end of attr_allocate_frame() It is preferable to exit through the out: label because internal debugging functions are located there. |
| CVE-2023-52640 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix oob in ntfs_listxattr The length of name cannot exceed the space occupied by ea. |
| CVE-2023-52639 | In the Linux kernel, the following vulnerability has been resolved: KVM: s390: vsie: fix race during shadow creation Right now it is possible to see gmap->private being zero in kvm_s390_vsie_gmap_notifier resulting in a crash. This is due to the fact that we add gmap->private == kvm after creation: static int acquire_gmap_shadow(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page) { [...] gmap = gmap_shadow(vcpu->arch.gmap, asce, edat); if (IS_ERR(gmap)) return PTR_ERR(gmap); gmap->private = vcpu->kvm; Let children inherit the private field of the parent. |
| CVE-2023-52638 | In the Linux kernel, the following vulnerability has been resolved: can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock The following 3 locks would race against each other, causing the deadlock situation in the Syzbot bug report: - j1939_socks_lock - active_session_list_lock - sk_session_queue_lock A reasonable fix is to change j1939_socks_lock to an rwlock, since in the rare situations where a write lock is required for the linked list that j1939_socks_lock is protecting, the code does not attempt to acquire any more locks. This would break the circular lock dependency, where, for example, the current thread already locks j1939_socks_lock and attempts to acquire sk_session_queue_lock, and at the same time, another thread attempts to acquire j1939_socks_lock while holding sk_session_queue_lock. NOTE: This patch along does not fix the unregister_netdevice bug reported by Syzbot; instead, it solves a deadlock situation to prepare for one or more further patches to actually fix the Syzbot bug, which appears to be a reference counting problem within the j1939 codebase. [mkl: remove unrelated newline change] |
| CVE-2023-52637 | In the Linux kernel, the following vulnerability has been resolved: can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER) Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...) modifies jsk->filters while receiving packets. Following trace was seen on affected system: ================================================================== BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] Read of size 4 at addr ffff888012144014 by task j1939/350 CPU: 0 PID: 350 Comm: j1939 Tainted: G W OE 6.5.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: print_report+0xd3/0x620 ? kasan_complete_mode_report_info+0x7d/0x200 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] kasan_report+0xc2/0x100 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] __asan_load4+0x84/0xb0 j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] j1939_sk_recv+0x20b/0x320 [can_j1939] ? __kasan_check_write+0x18/0x20 ? __pfx_j1939_sk_recv+0x10/0x10 [can_j1939] ? j1939_simple_recv+0x69/0x280 [can_j1939] ? j1939_ac_recv+0x5e/0x310 [can_j1939] j1939_can_recv+0x43f/0x580 [can_j1939] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] ? raw_rcv+0x42/0x3c0 [can_raw] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] can_rcv_filter+0x11f/0x350 [can] can_receive+0x12f/0x190 [can] ? __pfx_can_rcv+0x10/0x10 [can] can_rcv+0xdd/0x130 [can] ? __pfx_can_rcv+0x10/0x10 [can] __netif_receive_skb_one_core+0x13d/0x150 ? __pfx___netif_receive_skb_one_core+0x10/0x10 ? __kasan_check_write+0x18/0x20 ? _raw_spin_lock_irq+0x8c/0xe0 __netif_receive_skb+0x23/0xb0 process_backlog+0x107/0x260 __napi_poll+0x69/0x310 net_rx_action+0x2a1/0x580 ? __pfx_net_rx_action+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? handle_irq_event+0x7d/0xa0 __do_softirq+0xf3/0x3f8 do_softirq+0x53/0x80 </IRQ> <TASK> __local_bh_enable_ip+0x6e/0x70 netif_rx+0x16b/0x180 can_send+0x32b/0x520 [can] ? __pfx_can_send+0x10/0x10 [can] ? __check_object_size+0x299/0x410 raw_sendmsg+0x572/0x6d0 [can_raw] ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] ? apparmor_socket_sendmsg+0x2f/0x40 ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] sock_sendmsg+0xef/0x100 sock_write_iter+0x162/0x220 ? __pfx_sock_write_iter+0x10/0x10 ? __rtnl_unlock+0x47/0x80 ? security_file_permission+0x54/0x320 vfs_write+0x6ba/0x750 ? __pfx_vfs_write+0x10/0x10 ? __fget_light+0x1ca/0x1f0 ? __rcu_read_unlock+0x5b/0x280 ksys_write+0x143/0x170 ? __pfx_ksys_write+0x10/0x10 ? __kasan_check_read+0x15/0x20 ? fpregs_assert_state_consistent+0x62/0x70 __x64_sys_write+0x47/0x60 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6d/0x90 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x79/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 348: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_alloc_info+0x1f/0x30 __kasan_kmalloc+0xb5/0xc0 __kmalloc_node_track_caller+0x67/0x160 j1939_sk_setsockopt+0x284/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 349: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_free_info+0x2f/0x50 __kasan_slab_free+0x12e/0x1c0 __kmem_cache_free+0x1b9/0x380 kfree+0x7a/0x120 j1939_sk_setsockopt+0x3b2/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 |
| CVE-2023-52636 | In the Linux kernel, the following vulnerability has been resolved: libceph: just wait for more data to be available on the socket A short read may occur while reading the message footer from the socket. Later, when the socket is ready for another read, the messenger invokes all read_partial_*() handlers, including read_partial_sparse_msg_data(). The expectation is that read_partial_sparse_msg_data() would bail, allowing the messenger to invoke read_partial() for the footer and pick up where it left off. However read_partial_sparse_msg_data() violates that and ends up calling into the state machine in the OSD client. The sparse-read state machine assumes that it's a new op and interprets some piece of the footer as the sparse-read header and returns bogus extents/data length, etc. To determine whether read_partial_sparse_msg_data() should bail, let's reuse cursor->total_resid. Because once it reaches to zero that means all the extents and data have been successfully received in last read, else it could break out when partially reading any of the extents and data. And then osd_sparse_read() could continue where it left off. [ idryomov: changelog ] |
| CVE-2023-52635 | In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Synchronize devfreq_monitor_[start/stop] There is a chance if a frequent switch of the governor done in a loop result in timer list corruption where timer cancel being done from two place one from cancel_delayed_work_sync() and followed by expire_timers() can be seen from the traces[1]. while true do echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor done It looks to be issue with devfreq driver where device_monitor_[start/stop] need to synchronized so that delayed work should get corrupted while it is either being queued or running or being cancelled. Let's use polling flag and devfreq lock to synchronize the queueing the timer instance twice and work data being corrupted. [1] ... .. <idle>-0 [003] 9436.209662: timer_cancel timer=0xffffff80444f0428 <idle>-0 [003] 9436.209664: timer_expire_entry timer=0xffffff80444f0428 now=0x10022da1c function=__typeid__ZTSFvP10timer_listE_global_addr baseclk=0x10022da1c <idle>-0 [003] 9436.209718: timer_expire_exit timer=0xffffff80444f0428 kworker/u16:6-14217 [003] 9436.209863: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2b now=0x10022da1c flags=182452227 vendor.xxxyyy.ha-1593 [004] 9436.209888: timer_cancel timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216390: timer_init timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216392: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2c now=0x10022da1d flags=186646532 vendor.xxxyyy.ha-1593 [005] 9436.220992: timer_cancel timer=0xffffff80444f0428 xxxyyyTraceManag-7795 [004] 9436.261641: timer_cancel timer=0xffffff80444f0428 [2] 9436.261653][ C4] Unable to handle kernel paging request at virtual address dead00000000012a [ 9436.261664][ C4] Mem abort info: [ 9436.261666][ C4] ESR = 0x96000044 [ 9436.261669][ C4] EC = 0x25: DABT (current EL), IL = 32 bits [ 9436.261671][ C4] SET = 0, FnV = 0 [ 9436.261673][ C4] EA = 0, S1PTW = 0 [ 9436.261675][ C4] Data abort info: [ 9436.261677][ C4] ISV = 0, ISS = 0x00000044 [ 9436.261680][ C4] CM = 0, WnR = 1 [ 9436.261682][ C4] [dead00000000012a] address between user and kernel address ranges [ 9436.261685][ C4] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 9436.261701][ C4] Skip md ftrace buffer dump for: 0x3a982d0 ... [ 9436.262138][ C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S W O 5.10.149-android12-9-o-g17f915d29d0c #1 [ 9436.262141][ C4] Hardware name: Qualcomm Technologies, Inc. (DT) [ 9436.262144][ C4] pstate: 22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--) [ 9436.262161][ C4] pc : expire_timers+0x9c/0x438 [ 9436.262164][ C4] lr : expire_timers+0x2a4/0x438 [ 9436.262168][ C4] sp : ffffffc010023dd0 [ 9436.262171][ C4] x29: ffffffc010023df0 x28: ffffffd0636fdc18 [ 9436.262178][ C4] x27: ffffffd063569dd0 x26: ffffffd063536008 [ 9436.262182][ C4] x25: 0000000000000001 x24: ffffff88f7c69280 [ 9436.262185][ C4] x23: 00000000000000e0 x22: dead000000000122 [ 9436.262188][ C4] x21: 000000010022da29 x20: ffffff8af72b4e80 [ 9436.262191][ C4] x19: ffffffc010023e50 x18: ffffffc010025038 [ 9436.262195][ C4] x17: 0000000000000240 x16: 0000000000000201 [ 9436.262199][ C4] x15: ffffffffffffffff x14: ffffff889f3c3100 [ 9436.262203][ C4] x13: ffffff889f3c3100 x12: 00000000049f56b8 [ 9436.262207][ C4] x11: 00000000049f56b8 x10: 00000000ffffffff [ 9436.262212][ C4] x9 : ffffffc010023e50 x8 : dead000000000122 [ 9436.262216][ C4] x7 : ffffffffffffffff x6 : ffffffc0100239d8 [ 9436.262220][ C4] x5 : 0000000000000000 x4 : 0000000000000101 [ 9436.262223][ C4] x3 : 0000000000000080 x2 : ffffff8 ---truncated--- |
| CVE-2023-52634 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix disable_otg_wa logic [Why] When switching to another HDMI mode, we are unnecesarilly disabling/enabling FIFO causing both HPO and DIG registers to be set at the same time when only HPO is supposed to be set. This can lead to a system hang the next time we change refresh rates as there are cases when we don't disable OTG/FIFO but FIFO is enabled when it isn't supposed to be. [How] Removing the enable/disable FIFO entirely. |
| CVE-2023-52633 | In the Linux kernel, the following vulnerability has been resolved: um: time-travel: fix time corruption In 'basic' time-travel mode (without =inf-cpu or =ext), we still get timer interrupts. These can happen at arbitrary points in time, i.e. while in timer_read(), which pushes time forward just a little bit. Then, if we happen to get the interrupt after calculating the new time to push to, but before actually finishing that, the interrupt will set the time to a value that's incompatible with the forward, and we'll crash because time goes backwards when we do the forwarding. Fix this by reading the time_travel_time, calculating the adjustment, and doing the adjustment all with interrupts disabled. |
| CVE-2023-52632 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix lock dependency warning with srcu ====================================================== WARNING: possible circular locking dependency detected 6.5.0-kfd-yangp #2289 Not tainted ------------------------------------------------------ kworker/0:2/996 is trying to acquire lock: (srcu){.+.+}-{0:0}, at: __synchronize_srcu+0x5/0x1a0 but task is already holding lock: ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}, at: process_one_work+0x211/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}: __flush_work+0x88/0x4f0 svm_range_list_lock_and_flush_work+0x3d/0x110 [amdgpu] svm_range_set_attr+0xd6/0x14c0 [amdgpu] kfd_ioctl+0x1d1/0x630 [amdgpu] __x64_sys_ioctl+0x88/0xc0 -> #2 (&info->lock#2){+.+.}-{3:3}: __mutex_lock+0x99/0xc70 amdgpu_amdkfd_gpuvm_restore_process_bos+0x54/0x740 [amdgpu] restore_process_helper+0x22/0x80 [amdgpu] restore_process_worker+0x2d/0xa0 [amdgpu] process_one_work+0x29b/0x560 worker_thread+0x3d/0x3d0 -> #1 ((work_completion)(&(&process->restore_work)->work)){+.+.}-{0:0}: __flush_work+0x88/0x4f0 __cancel_work_timer+0x12c/0x1c0 kfd_process_notifier_release_internal+0x37/0x1f0 [amdgpu] __mmu_notifier_release+0xad/0x240 exit_mmap+0x6a/0x3a0 mmput+0x6a/0x120 do_exit+0x322/0xb90 do_group_exit+0x37/0xa0 __x64_sys_exit_group+0x18/0x20 do_syscall_64+0x38/0x80 -> #0 (srcu){.+.+}-{0:0}: __lock_acquire+0x1521/0x2510 lock_sync+0x5f/0x90 __synchronize_srcu+0x4f/0x1a0 __mmu_notifier_release+0x128/0x240 exit_mmap+0x6a/0x3a0 mmput+0x6a/0x120 svm_range_deferred_list_work+0x19f/0x350 [amdgpu] process_one_work+0x29b/0x560 worker_thread+0x3d/0x3d0 other info that might help us debug this: Chain exists of: srcu --> &info->lock#2 --> (work_completion)(&svms->deferred_list_work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&svms->deferred_list_work)); lock(&info->lock#2); lock((work_completion)(&svms->deferred_list_work)); sync(srcu); |
| CVE-2023-52631 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix an NULL dereference bug The issue here is when this is called from ntfs_load_attr_list(). The "size" comes from le32_to_cpu(attr->res.data_size) so it can't overflow on a 64bit systems but on 32bit systems the "+ 1023" can overflow and the result is zero. This means that the kmalloc will succeed by returning the ZERO_SIZE_PTR and then the memcpy() will crash with an Oops on the next line. |
| CVE-2023-52629 | In the Linux kernel, the following vulnerability has been resolved: sh: push-switch: Reorder cleanup operations to avoid use-after-free bug The original code puts flush_work() before timer_shutdown_sync() in switch_drv_remove(). Although we use flush_work() to stop the worker, it could be rescheduled in switch_timer(). As a result, a use-after-free bug can occur. The details are shown below: (cpu 0) | (cpu 1) switch_drv_remove() | flush_work() | ... | switch_timer // timer | schedule_work(&psw->work) timer_shutdown_sync() | ... | switch_work_handler // worker kfree(psw) // free | | psw->state = 0 // use This patch puts timer_shutdown_sync() before flush_work() to mitigate the bugs. As a result, the worker and timer will be stopped safely before the deallocate operations. |
| CVE-2023-52628 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: exthdr: fix 4-byte stack OOB write If priv->len is a multiple of 4, then dst[len / 4] can write past the destination array which leads to stack corruption. This construct is necessary to clean the remainder of the register in case ->len is NOT a multiple of the register size, so make it conditional just like nft_payload.c does. The bug was added in 4.1 cycle and then copied/inherited when tcp/sctp and ip option support was added. Bug reported by Zero Day Initiative project (ZDI-CAN-21950, ZDI-CAN-21951, ZDI-CAN-21961). |
| CVE-2023-52627 | In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7091r: Allow users to configure device events AD7091R-5 devices are supported by the ad7091r-5 driver together with the ad7091r-base driver. Those drivers declared iio events for notifying user space when ADC readings fall bellow the thresholds of low limit registers or above the values set in high limit registers. However, to configure iio events and their thresholds, a set of callback functions must be implemented and those were not present until now. The consequence of trying to configure ad7091r-5 events without the proper callback functions was a null pointer dereference in the kernel because the pointers to the callback functions were not set. Implement event configuration callbacks allowing users to read/write event thresholds and enable/disable event generation. Since the event spec structs are generic to AD7091R devices, also move those from the ad7091r-5 driver the base driver so they can be reused when support for ad7091r-2/-4/-8 be added. |
| CVE-2023-52626 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context Indirection (*) is of lower precedence than postfix increment (++). Logic in napi_poll context would cause an out-of-bound read by first increment the pointer address by byte address space and then dereference the value. Rather, the intended logic was to dereference first and then increment the underlying value. |
| CVE-2023-52625 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Refactor DMCUB enter/exit idle interface [Why] We can hang in place trying to send commands when the DMCUB isn't powered on. [How] We need to exit out of the idle state prior to sending a command, but the process that performs the exit also invokes a command itself. Fixing this issue involves the following: 1. Using a software state to track whether or not we need to start the process to exit idle or notify idle. It's possible for the hardware to have exited an idle state without driver knowledge, but entering one is always restricted to a driver allow - which makes the SW state vs HW state mismatch issue purely one of optimization, which should seldomly be hit, if at all. 2. Refactor any instances of exit/notify idle to use a single wrapper that maintains this SW state. This works simialr to dc_allow_idle_optimizations, but works at the DMCUB level and makes sure the state is marked prior to any notify/exit idle so we don't enter an infinite loop. 3. Make sure we exit out of idle prior to sending any commands or waiting for DMCUB idle. This patch takes care of 1/2. A future patch will take care of wrapping DMCUB command submission with calls to this new interface. |
| CVE-2023-52624 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wake DMCUB before executing GPINT commands [Why] DMCUB can be in idle when we attempt to interface with the HW through the GPINT mailbox resulting in a system hang. [How] Add dc_wake_and_execute_gpint() to wrap the wake, execute, sleep sequence. If the GPINT executes successfully then DMCUB will be put back into sleep after the optional response is returned. It functions similar to the inbox command interface. |
| CVE-2023-52623 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a suspicious RCU usage warning I received the following warning while running cthon against an ontap server running pNFS: [ 57.202521] ============================= [ 57.202522] WARNING: suspicious RCU usage [ 57.202523] 6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted [ 57.202525] ----------------------------- [ 57.202525] net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!! [ 57.202527] other info that might help us debug this: [ 57.202528] rcu_scheduler_active = 2, debug_locks = 1 [ 57.202529] no locks held by test5/3567. [ 57.202530] stack backtrace: [ 57.202532] CPU: 0 PID: 3567 Comm: test5 Not tainted 6.7.0-rc3-g2cc14f52aeb7 #41492 5b09971b4965c0aceba19f3eea324a4a806e227e [ 57.202534] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 [ 57.202536] Call Trace: [ 57.202537] <TASK> [ 57.202540] dump_stack_lvl+0x77/0xb0 [ 57.202551] lockdep_rcu_suspicious+0x154/0x1a0 [ 57.202556] rpc_xprt_switch_has_addr+0x17c/0x190 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202596] rpc_clnt_setup_test_and_add_xprt+0x50/0x180 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202621] ? rpc_clnt_add_xprt+0x254/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202646] rpc_clnt_add_xprt+0x27a/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202671] ? __pfx_rpc_clnt_setup_test_and_add_xprt+0x10/0x10 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202696] nfs4_pnfs_ds_connect+0x345/0x760 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202728] ? __pfx_nfs4_test_session_trunk+0x10/0x10 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202754] nfs4_fl_prepare_ds+0x75/0xc0 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202760] filelayout_write_pagelist+0x4a/0x200 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202765] pnfs_generic_pg_writepages+0xbe/0x230 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202788] __nfs_pageio_add_request+0x3fd/0x520 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202813] nfs_pageio_add_request+0x18b/0x390 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202831] nfs_do_writepage+0x116/0x1e0 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202849] nfs_writepages_callback+0x13/0x30 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202866] write_cache_pages+0x265/0x450 [ 57.202870] ? __pfx_nfs_writepages_callback+0x10/0x10 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202891] nfs_writepages+0x141/0x230 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202913] do_writepages+0xd2/0x230 [ 57.202917] ? filemap_fdatawrite_wbc+0x5c/0x80 [ 57.202921] filemap_fdatawrite_wbc+0x67/0x80 [ 57.202924] filemap_write_and_wait_range+0xd9/0x170 [ 57.202930] nfs_wb_all+0x49/0x180 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202947] nfs4_file_flush+0x72/0xb0 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202969] __se_sys_close+0x46/0xd0 [ 57.202972] do_syscall_64+0x68/0x100 [ 57.202975] ? do_syscall_64+0x77/0x100 [ 57.202976] ? do_syscall_64+0x77/0x100 [ 57.202979] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 57.202982] RIP: 0033:0x7fe2b12e4a94 [ 57.202985] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 18 0e 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 c3 0f 1f 00 48 83 ec 18 89 7c 24 0c e8 c3 [ 57.202987] RSP: 002b:00007ffe857ddb38 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 [ 57.202989] RAX: ffffffffffffffda RBX: 00007ffe857dfd68 RCX: 00007fe2b12e4a94 [ 57.202991] RDX: 0000000000002000 RSI: 00007ffe857ddc40 RDI: 0000000000000003 [ 57.202992] RBP: 00007ffe857dfc50 R08: 7fffffffffffffff R09: 0000000065650f49 [ 57.202993] R10: 00007f ---truncated--- |
| CVE-2023-52622 | In the Linux kernel, the following vulnerability has been resolved: ext4: avoid online resizing failures due to oversized flex bg When we online resize an ext4 filesystem with a oversized flexbg_size, mkfs.ext4 -F -G 67108864 $dev -b 4096 100M mount $dev $dir resize2fs $dev 16G the following WARN_ON is triggered: ================================================================== WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550 Modules linked in: sg(E) CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314 RIP: 0010:__alloc_pages+0x411/0x550 Call Trace: <TASK> __kmalloc_large_node+0xa2/0x200 __kmalloc+0x16e/0x290 ext4_resize_fs+0x481/0xd80 __ext4_ioctl+0x1616/0x1d90 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xf0/0x150 do_syscall_64+0x3b/0x90 ================================================================== This is because flexbg_size is too large and the size of the new_group_data array to be allocated exceeds MAX_ORDER. Currently, the minimum value of MAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the corresponding maximum number of groups that can be allocated is: (PAGE_SIZE << MAX_ORDER) / sizeof(struct ext4_new_group_data) ≈ 21845 And the value that is down-aligned to the power of 2 is 16384. Therefore, this value is defined as MAX_RESIZE_BG, and the number of groups added each time does not exceed this value during resizing, and is added multiple times to complete the online resizing. The difference is that the metadata in a flex_bg may be more dispersed. |
| CVE-2023-52621 | In the Linux kernel, the following vulnerability has been resolved: bpf: Check rcu_read_lock_trace_held() before calling bpf map helpers These three bpf_map_{lookup,update,delete}_elem() helpers are also available for sleepable bpf program, so add the corresponding lock assertion for sleepable bpf program, otherwise the following warning will be reported when a sleepable bpf program manipulates bpf map under interpreter mode (aka bpf_jit_enable=0): WARNING: CPU: 3 PID: 4985 at kernel/bpf/helpers.c:40 ...... CPU: 3 PID: 4985 Comm: test_progs Not tainted 6.6.0+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:bpf_map_lookup_elem+0x54/0x60 ...... Call Trace: <TASK> ? __warn+0xa5/0x240 ? bpf_map_lookup_elem+0x54/0x60 ? report_bug+0x1ba/0x1f0 ? handle_bug+0x40/0x80 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1b/0x20 ? __pfx_bpf_map_lookup_elem+0x10/0x10 ? rcu_lockdep_current_cpu_online+0x65/0xb0 ? rcu_is_watching+0x23/0x50 ? bpf_map_lookup_elem+0x54/0x60 ? __pfx_bpf_map_lookup_elem+0x10/0x10 ___bpf_prog_run+0x513/0x3b70 __bpf_prog_run32+0x9d/0xd0 ? __bpf_prog_enter_sleepable_recur+0xad/0x120 ? __bpf_prog_enter_sleepable_recur+0x3e/0x120 bpf_trampoline_6442580665+0x4d/0x1000 __x64_sys_getpgid+0x5/0x30 ? do_syscall_64+0x36/0xb0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> |
| CVE-2023-52620 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: disallow timeout for anonymous sets Never used from userspace, disallow these parameters. |
| CVE-2023-52619 | In the Linux kernel, the following vulnerability has been resolved: pstore/ram: Fix crash when setting number of cpus to an odd number When the number of cpu cores is adjusted to 7 or other odd numbers, the zone size will become an odd number. The address of the zone will become: addr of zone0 = BASE addr of zone1 = BASE + zone_size addr of zone2 = BASE + zone_size*2 ... The address of zone1/3/5/7 will be mapped to non-alignment va. Eventually crashes will occur when accessing these va. So, use ALIGN_DOWN() to make sure the zone size is even to avoid this bug. |
| CVE-2023-52618 | In the Linux kernel, the following vulnerability has been resolved: block/rnbd-srv: Check for unlikely string overflow Since "dev_search_path" can technically be as large as PATH_MAX, there was a risk of truncation when copying it and a second string into "full_path" since it was also PATH_MAX sized. The W=1 builds were reporting this warning: drivers/block/rnbd/rnbd-srv.c: In function 'process_msg_open.isra': drivers/block/rnbd/rnbd-srv.c:616:51: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size between 0 and 4095 [-Wformat-truncation=] 616 | snprintf(full_path, PATH_MAX, "%s/%s", | ^~ In function 'rnbd_srv_get_full_path', inlined from 'process_msg_open.isra' at drivers/block/rnbd/rnbd-srv.c:721:14: drivers/block/rnbd/rnbd-srv.c:616:17: note: 'snprintf' output between 2 and 4351 bytes into a destination of size 4096 616 | snprintf(full_path, PATH_MAX, "%s/%s", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 617 | dev_search_path, dev_name); | ~~~~~~~~~~~~~~~~~~~~~~~~~~ To fix this, unconditionally check for truncation (as was already done for the case where "%SESSNAME%" was present). |
| CVE-2023-52617 | In the Linux kernel, the following vulnerability has been resolved: PCI: switchtec: Fix stdev_release() crash after surprise hot remove A PCI device hot removal may occur while stdev->cdev is held open. The call to stdev_release() then happens during close or exit, at a point way past switchtec_pci_remove(). Otherwise the last ref would vanish with the trailing put_device(), just before return. At that later point in time, the devm cleanup has already removed the stdev->mmio_mrpc mapping. Also, the stdev->pdev reference was not a counted one. Therefore, in DMA mode, the iowrite32() in stdev_release() will cause a fatal page fault, and the subsequent dma_free_coherent(), if reached, would pass a stale &stdev->pdev->dev pointer. Fix by moving MRPC DMA shutdown into switchtec_pci_remove(), after stdev_kill(). Counting the stdev->pdev ref is now optional, but may prevent future accidents. Reproducible via the script at https://lore.kernel.org/r/[email protected] |
| CVE-2023-52616 | In the Linux kernel, the following vulnerability has been resolved: crypto: lib/mpi - Fix unexpected pointer access in mpi_ec_init When the mpi_ec_ctx structure is initialized, some fields are not cleared, causing a crash when referencing the field when the structure was released. Initially, this issue was ignored because memory for mpi_ec_ctx is allocated with the __GFP_ZERO flag. For example, this error will be triggered when calculating the Za value for SM2 separately. |
| CVE-2023-52615 | In the Linux kernel, the following vulnerability has been resolved: hwrng: core - Fix page fault dead lock on mmap-ed hwrng There is a dead-lock in the hwrng device read path. This triggers when the user reads from /dev/hwrng into memory also mmap-ed from /dev/hwrng. The resulting page fault triggers a recursive read which then dead-locks. Fix this by using a stack buffer when calling copy_to_user. |
| CVE-2023-52614 | In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Fix buffer overflow in trans_stat_show Fix buffer overflow in trans_stat_show(). Convert simple snprintf to the more secure scnprintf with size of PAGE_SIZE. Add condition checking if we are exceeding PAGE_SIZE and exit early from loop. Also add at the end a warning that we exceeded PAGE_SIZE and that stats is disabled. Return -EFBIG in the case where we don't have enough space to write the full transition table. Also document in the ABI that this function can return -EFBIG error. |
| CVE-2023-52613 | In the Linux kernel, the following vulnerability has been resolved: drivers/thermal/loongson2_thermal: Fix incorrect PTR_ERR() judgment PTR_ERR() returns -ENODEV when thermal-zones are undefined, and we need -ENODEV as the right value for comparison. Otherwise, tz->type is NULL when thermal-zones is undefined, resulting in the following error: [ 12.290030] CPU 1 Unable to handle kernel paging request at virtual address fffffffffffffff1, era == 900000000355f410, ra == 90000000031579b8 [ 12.302877] Oops[#1]: [ 12.305190] CPU: 1 PID: 181 Comm: systemd-udevd Not tainted 6.6.0-rc7+ #5385 [ 12.312304] pc 900000000355f410 ra 90000000031579b8 tp 90000001069e8000 sp 90000001069eba10 [ 12.320739] a0 0000000000000000 a1 fffffffffffffff1 a2 0000000000000014 a3 0000000000000001 [ 12.329173] a4 90000001069eb990 a5 0000000000000001 a6 0000000000001001 a7 900000010003431c [ 12.337606] t0 fffffffffffffff1 t1 54567fd5da9b4fd4 t2 900000010614ec40 t3 00000000000dc901 [ 12.346041] t4 0000000000000000 t5 0000000000000004 t6 900000010614ee20 t7 900000000d00b790 [ 12.354472] t8 00000000000dc901 u0 54567fd5da9b4fd4 s9 900000000402ae10 s0 900000010614ec40 [ 12.362916] s1 90000000039fced0 s2 ffffffffffffffed s3 ffffffffffffffed s4 9000000003acc000 [ 12.362931] s5 0000000000000004 s6 fffffffffffff000 s7 0000000000000490 s8 90000001028b2ec8 [ 12.362938] ra: 90000000031579b8 thermal_add_hwmon_sysfs+0x258/0x300 [ 12.386411] ERA: 900000000355f410 strscpy+0xf0/0x160 [ 12.391626] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 12.397898] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 12.403678] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 12.409859] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 12.415882] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 12.415907] BADV: fffffffffffffff1 [ 12.415911] PRID: 0014a000 (Loongson-64bit, Loongson-2K1000) [ 12.415917] Modules linked in: loongson2_thermal(+) vfat fat uio_pdrv_genirq uio fuse zram zsmalloc [ 12.415950] Process systemd-udevd (pid: 181, threadinfo=00000000358b9718, task=00000000ace72fe3) [ 12.415961] Stack : 0000000000000dc0 54567fd5da9b4fd4 900000000402ae10 9000000002df9358 [ 12.415982] ffffffffffffffed 0000000000000004 9000000107a10aa8 90000001002a3410 [ 12.415999] ffffffffffffffed ffffffffffffffed 9000000107a11268 9000000003157ab0 [ 12.416016] 9000000107a10aa8 ffffff80020fc0c8 90000001002a3410 ffffffffffffffed [ 12.416032] 0000000000000024 ffffff80020cc1e8 900000000402b2a0 9000000003acc000 [ 12.416048] 90000001002a3410 0000000000000000 ffffff80020f4030 90000001002a3410 [ 12.416065] 0000000000000000 9000000002df6808 90000001002a3410 0000000000000000 [ 12.416081] ffffff80020f4030 0000000000000000 90000001002a3410 9000000002df2ba8 [ 12.416097] 00000000000000b4 90000001002a34f4 90000001002a3410 0000000000000002 [ 12.416114] ffffff80020f4030 fffffffffffffff0 90000001002a3410 9000000002df2f30 [ 12.416131] ... [ 12.416138] Call Trace: [ 12.416142] [<900000000355f410>] strscpy+0xf0/0x160 [ 12.416167] [<90000000031579b8>] thermal_add_hwmon_sysfs+0x258/0x300 [ 12.416183] [<9000000003157ab0>] devm_thermal_add_hwmon_sysfs+0x50/0xe0 [ 12.416200] [<ffffff80020cc1e8>] loongson2_thermal_probe+0x128/0x200 [loongson2_thermal] [ 12.416232] [<9000000002df6808>] platform_probe+0x68/0x140 [ 12.416249] [<9000000002df2ba8>] really_probe+0xc8/0x3c0 [ 12.416269] [<9000000002df2f30>] __driver_probe_device+0x90/0x180 [ 12.416286] [<9000000002df3058>] driver_probe_device+0x38/0x160 [ 12.416302] [<9000000002df33a8>] __driver_attach+0xa8/0x200 [ 12.416314] [<9000000002deffec>] bus_for_each_dev+0x8c/0x120 [ 12.416330] [<9000000002df198c>] bus_add_driver+0x10c/0x2a0 [ 12.416346] [<9000000002df46b4>] driver_register+0x74/0x160 [ 12.416358] [<90000000022201a4>] do_one_initcall+0x84/0x220 [ 12.416372] [<90000000022f3ab8>] do_init_module+0x58/0x2c0 [ ---truncated--- |
| CVE-2023-52612 | In the Linux kernel, the following vulnerability has been resolved: crypto: scomp - fix req->dst buffer overflow The req->dst buffer size should be checked before copying from the scomp_scratch->dst to avoid req->dst buffer overflow problem. |
| CVE-2023-52611 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: sdio: Honor the host max_req_size in the RX path Lukas reports skb_over_panic errors on his Banana Pi BPI-CM4 which comes with an Amlogic A311D (G12B) SoC and a RTL8822CS SDIO wifi/Bluetooth combo card. The error he observed is identical to what has been fixed in commit e967229ead0e ("wifi: rtw88: sdio: Check the HISR RX_REQUEST bit in rtw_sdio_rx_isr()") but that commit didn't fix Lukas' problem. Lukas found that disabling or limiting RX aggregation works around the problem for some time (but does not fully fix it). In the following discussion a few key topics have been discussed which have an impact on this problem: - The Amlogic A311D (G12B) SoC has a hardware bug in the SDIO controller which prevents DMA transfers. Instead all transfers need to go through the controller SRAM which limits transfers to 1536 bytes - rtw88 chips don't split incoming (RX) packets, so if a big packet is received this is forwarded to the host in it's original form - rtw88 chips can do RX aggregation, meaning more multiple incoming packets can be pulled by the host from the card with one MMC/SDIO transfer. This Depends on settings in the REG_RXDMA_AGG_PG_TH register (BIT_RXDMA_AGG_PG_TH limits the number of packets that will be aggregated, BIT_DMA_AGG_TO_V1 configures a timeout for aggregation and BIT_EN_PRE_CALC makes the chip honor the limits more effectively) Use multiple consecutive reads in rtw_sdio_read_port() and limit the number of bytes which are copied by the host from the card in one MMC/SDIO transfer. This allows receiving a buffer that's larger than the hosts max_req_size (number of bytes which can be transferred in one MMC/SDIO transfer). As a result of this the skb_over_panic error is gone as the rtw88 driver is now able to receive more than 1536 bytes from the card (either because the incoming packet is larger than that or because multiple packets have been aggregated). In case of an receive errors (-EILSEQ has been observed by Lukas) we need to drain the remaining data from the card's buffer, otherwise the card will return corrupt data for the next rtw_sdio_read_port() call. |
| CVE-2023-52610 | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix skb leak and crash on ooo frags act_ct adds skb->users before defragmentation. If frags arrive in order, the last frag's reference is reset in: inet_frag_reasm_prepare skb_morph which is not straightforward. However when frags arrive out of order, nobody unref the last frag, and all frags are leaked. The situation is even worse, as initiating packet capture can lead to a crash[0] when skb has been cloned and shared at the same time. Fix the issue by removing skb_get() before defragmentation. act_ct returns TC_ACT_CONSUMED when defrag failed or in progress. [0]: [ 843.804823] ------------[ cut here ]------------ [ 843.809659] kernel BUG at net/core/skbuff.c:2091! [ 843.814516] invalid opcode: 0000 [#1] PREEMPT SMP [ 843.819296] CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G S 6.7.0-rc3 #2 [ 843.824107] Hardware name: XFUSION 1288H V6/BC13MBSBD, BIOS 1.29 11/25/2022 [ 843.828953] RIP: 0010:pskb_expand_head+0x2ac/0x300 [ 843.833805] Code: 8b 70 28 48 85 f6 74 82 48 83 c6 08 bf 01 00 00 00 e8 38 bd ff ff 8b 83 c0 00 00 00 48 03 83 c8 00 00 00 e9 62 ff ff ff 0f 0b <0f> 0b e8 8d d0 ff ff e9 b3 fd ff ff 81 7c 24 14 40 01 00 00 4c 89 [ 843.843698] RSP: 0018:ffffc9000cce07c0 EFLAGS: 00010202 [ 843.848524] RAX: 0000000000000002 RBX: ffff88811a211d00 RCX: 0000000000000820 [ 843.853299] RDX: 0000000000000640 RSI: 0000000000000000 RDI: ffff88811a211d00 [ 843.857974] RBP: ffff888127d39518 R08: 00000000bee97314 R09: 0000000000000000 [ 843.862584] R10: 0000000000000000 R11: ffff8881109f0000 R12: 0000000000000880 [ 843.867147] R13: ffff888127d39580 R14: 0000000000000640 R15: ffff888170f7b900 [ 843.871680] FS: 0000000000000000(0000) GS:ffff889ffffc0000(0000) knlGS:0000000000000000 [ 843.876242] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 843.880778] CR2: 00007fa42affcfb8 CR3: 000000011433a002 CR4: 0000000000770ef0 [ 843.885336] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 843.889809] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 843.894229] PKRU: 55555554 [ 843.898539] Call Trace: [ 843.902772] <IRQ> [ 843.906922] ? __die_body+0x1e/0x60 [ 843.911032] ? die+0x3c/0x60 [ 843.915037] ? do_trap+0xe2/0x110 [ 843.918911] ? pskb_expand_head+0x2ac/0x300 [ 843.922687] ? do_error_trap+0x65/0x80 [ 843.926342] ? pskb_expand_head+0x2ac/0x300 [ 843.929905] ? exc_invalid_op+0x50/0x60 [ 843.933398] ? pskb_expand_head+0x2ac/0x300 [ 843.936835] ? asm_exc_invalid_op+0x1a/0x20 [ 843.940226] ? pskb_expand_head+0x2ac/0x300 [ 843.943580] inet_frag_reasm_prepare+0xd1/0x240 [ 843.946904] ip_defrag+0x5d4/0x870 [ 843.950132] nf_ct_handle_fragments+0xec/0x130 [nf_conntrack] [ 843.953334] tcf_ct_act+0x252/0xd90 [act_ct] [ 843.956473] ? tcf_mirred_act+0x516/0x5a0 [act_mirred] [ 843.959657] tcf_action_exec+0xa1/0x160 [ 843.962823] fl_classify+0x1db/0x1f0 [cls_flower] [ 843.966010] ? skb_clone+0x53/0xc0 [ 843.969173] tcf_classify+0x24d/0x420 [ 843.972333] tc_run+0x8f/0xf0 [ 843.975465] __netif_receive_skb_core+0x67a/0x1080 [ 843.978634] ? dev_gro_receive+0x249/0x730 [ 843.981759] __netif_receive_skb_list_core+0x12d/0x260 [ 843.984869] netif_receive_skb_list_internal+0x1cb/0x2f0 [ 843.987957] ? mlx5e_handle_rx_cqe_mpwrq_rep+0xfa/0x1a0 [mlx5_core] [ 843.991170] napi_complete_done+0x72/0x1a0 [ 843.994305] mlx5e_napi_poll+0x28c/0x6d0 [mlx5_core] [ 843.997501] __napi_poll+0x25/0x1b0 [ 844.000627] net_rx_action+0x256/0x330 [ 844.003705] __do_softirq+0xb3/0x29b [ 844.006718] irq_exit_rcu+0x9e/0xc0 [ 844.009672] common_interrupt+0x86/0xa0 [ 844.012537] </IRQ> [ 844.015285] <TASK> [ 844.017937] asm_common_interrupt+0x26/0x40 [ 844.020591] RIP: 0010:acpi_safe_halt+0x1b/0x20 [ 844.023247] Code: ff 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 65 48 8b 04 25 00 18 03 00 48 8b 00 a8 08 75 0c 66 90 0f 00 2d 81 d0 44 00 fb ---truncated--- |
| CVE-2023-52609 | In the Linux kernel, the following vulnerability has been resolved: binder: fix race between mmput() and do_exit() Task A calls binder_update_page_range() to allocate and insert pages on a remote address space from Task B. For this, Task A pins the remote mm via mmget_not_zero() first. This can race with Task B do_exit() and the final mmput() refcount decrement will come from Task A. Task A | Task B ------------------+------------------ mmget_not_zero() | | do_exit() | exit_mm() | mmput() mmput() | exit_mmap() | remove_vma() | fput() | In this case, the work of ____fput() from Task B is queued up in Task A as TWA_RESUME. So in theory, Task A returns to userspace and the cleanup work gets executed. However, Task A instead sleep, waiting for a reply from Task B that never comes (it's dead). This means the binder_deferred_release() is blocked until an unrelated binder event forces Task A to go back to userspace. All the associated death notifications will also be delayed until then. In order to fix this use mmput_async() that will schedule the work in the corresponding mm->async_put_work WQ instead of Task A. |
| CVE-2023-52608 | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Check mailbox/SMT channel for consistency On reception of a completion interrupt the shared memory area is accessed to retrieve the message header at first and then, if the message sequence number identifies a transaction which is still pending, the related payload is fetched too. When an SCMI command times out the channel ownership remains with the platform until eventually a late reply is received and, as a consequence, any further transmission attempt remains pending, waiting for the channel to be relinquished by the platform. Once that late reply is received the channel ownership is given back to the agent and any pending request is then allowed to proceed and overwrite the SMT area of the just delivered late reply; then the wait for the reply to the new request starts. It has been observed that the spurious IRQ related to the late reply can be wrongly associated with the freshly enqueued request: when that happens the SCMI stack in-flight lookup procedure is fooled by the fact that the message header now present in the SMT area is related to the new pending transaction, even though the real reply has still to arrive. This race-condition on the A2P channel can be detected by looking at the channel status bits: a genuine reply from the platform will have set the channel free bit before triggering the completion IRQ. Add a consistency check to validate such condition in the A2P ISR. |
| CVE-2023-52607 | In the Linux kernel, the following vulnerability has been resolved: powerpc/mm: Fix null-pointer dereference in pgtable_cache_add kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. |
| CVE-2023-52606 | In the Linux kernel, the following vulnerability has been resolved: powerpc/lib: Validate size for vector operations Some of the fp/vmx code in sstep.c assume a certain maximum size for the instructions being emulated. The size of those operations however is determined separately in analyse_instr(). Add a check to validate the assumption on the maximum size of the operations, so as to prevent any unintended kernel stack corruption. |
| CVE-2023-52604 | In the Linux kernel, the following vulnerability has been resolved: FS:JFS:UBSAN:array-index-out-of-bounds in dbAdjTree Syzkaller reported the following issue: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:2867:6 index 196694 is out of range for type 's8[1365]' (aka 'signed char[1365]') CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867 dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834 dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331 dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline] dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402 txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534 txUpdateMap+0x342/0x9e0 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 </TASK> ================================================================================ Kernel panic - not syncing: UBSAN: panic_on_warn set ... CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 panic+0x30f/0x770 kernel/panic.c:340 check_panic_on_warn+0x82/0xa0 kernel/panic.c:236 ubsan_epilogue lib/ubsan.c:223 [inline] __ubsan_handle_out_of_bounds+0x13c/0x150 lib/ubsan.c:348 dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867 dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834 dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331 dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline] dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402 txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534 txUpdateMap+0x342/0x9e0 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 </TASK> Kernel Offset: disabled Rebooting in 86400 seconds.. The issue is caused when the value of lp becomes greater than CTLTREESIZE which is the max size of stree. Adding a simple check solves this issue. Dave: As the function returns a void, good error handling would require a more intrusive code reorganization, so I modified Osama's patch at use WARN_ON_ONCE for lack of a cleaner option. The patch is tested via syzbot. |
| CVE-2023-52603 | In the Linux kernel, the following vulnerability has been resolved: UBSAN: array-index-out-of-bounds in dtSplitRoot Syzkaller reported the following issue: oop0: detected capacity change from 0 to 32768 UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dtree.c:1971:9 index -2 is out of range for type 'struct dtslot [128]' CPU: 0 PID: 3613 Comm: syz-executor270 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_out_of_bounds+0xdb/0x130 lib/ubsan.c:283 dtSplitRoot+0x8d8/0x1900 fs/jfs/jfs_dtree.c:1971 dtSplitUp fs/jfs/jfs_dtree.c:985 [inline] dtInsert+0x1189/0x6b80 fs/jfs/jfs_dtree.c:863 jfs_mkdir+0x757/0xb00 fs/jfs/namei.c:270 vfs_mkdir+0x3b3/0x590 fs/namei.c:4013 do_mkdirat+0x279/0x550 fs/namei.c:4038 __do_sys_mkdirat fs/namei.c:4053 [inline] __se_sys_mkdirat fs/namei.c:4051 [inline] __x64_sys_mkdirat+0x85/0x90 fs/namei.c:4051 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fcdc0113fd9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffeb8bc67d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000102 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcdc0113fd9 RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000003 RBP: 00007fcdc00d37a0 R08: 0000000000000000 R09: 00007fcdc00d37a0 R10: 00005555559a72c0 R11: 0000000000000246 R12: 00000000f8008000 R13: 0000000000000000 R14: 00083878000000f8 R15: 0000000000000000 </TASK> The issue is caused when the value of fsi becomes less than -1. The check to break the loop when fsi value becomes -1 is present but syzbot was able to produce value less than -1 which cause the error. This patch simply add the change for the values less than 0. The patch is tested via syzbot. |
| CVE-2023-52602 | In the Linux kernel, the following vulnerability has been resolved: jfs: fix slab-out-of-bounds Read in dtSearch Currently while searching for current page in the sorted entry table of the page there is a out of bound access. Added a bound check to fix the error. Dave: Set return code to -EIO |
| CVE-2023-52601 | In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in dbAdjTree Currently there is a bound check missing in the dbAdjTree while accessing the dmt_stree. To add the required check added the bool is_ctl which is required to determine the size as suggest in the following commit. https://lore.kernel.org/linux-kernel-mentees/[email protected]/ |
| CVE-2023-52600 | In the Linux kernel, the following vulnerability has been resolved: jfs: fix uaf in jfs_evict_inode When the execution of diMount(ipimap) fails, the object ipimap that has been released may be accessed in diFreeSpecial(). Asynchronous ipimap release occurs when rcu_core() calls jfs_free_node(). Therefore, when diMount(ipimap) fails, sbi->ipimap should not be initialized as ipimap. |
| CVE-2023-52599 | In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in diNewExt [Syz report] UBSAN: array-index-out-of-bounds in fs/jfs/jfs_imap.c:2360:2 index -878706688 is out of range for type 'struct iagctl[128]' CPU: 1 PID: 5065 Comm: syz-executor282 Not tainted 6.7.0-rc4-syzkaller-00009-gbee0e7762ad2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 diNewExt+0x3cf3/0x4000 fs/jfs/jfs_imap.c:2360 diAllocExt fs/jfs/jfs_imap.c:1949 [inline] diAllocAG+0xbe8/0x1e50 fs/jfs/jfs_imap.c:1666 diAlloc+0x1d3/0x1760 fs/jfs/jfs_imap.c:1587 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56 jfs_mkdir+0x1c5/0xb90 fs/jfs/namei.c:225 vfs_mkdir+0x2f1/0x4b0 fs/namei.c:4106 do_mkdirat+0x264/0x3a0 fs/namei.c:4129 __do_sys_mkdir fs/namei.c:4149 [inline] __se_sys_mkdir fs/namei.c:4147 [inline] __x64_sys_mkdir+0x6e/0x80 fs/namei.c:4147 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7fcb7e6a0b57 Code: ff ff 77 07 31 c0 c3 0f 1f 40 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 b8 53 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd83023038 EFLAGS: 00000286 ORIG_RAX: 0000000000000053 RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007fcb7e6a0b57 RDX: 00000000000a1020 RSI: 00000000000001ff RDI: 0000000020000140 RBP: 0000000020000140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000286 R12: 00007ffd830230d0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [Analysis] When the agstart is too large, it can cause agno overflow. [Fix] After obtaining agno, if the value is invalid, exit the subsequent process. Modified the test from agno > MAXAG to agno >= MAXAG based on linux-next report by kernel test robot (Dan Carpenter). |
| CVE-2023-52598 | In the Linux kernel, the following vulnerability has been resolved: s390/ptrace: handle setting of fpc register correctly If the content of the floating point control (fpc) register of a traced process is modified with the ptrace interface the new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the tracing process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space fpc register value, however it will be discarded, when returning to user space. In result the tracer will incorrectly continue to run with the value that was supposed to be used for the traced process. Fix this by saving fpu register contents with save_fpu_regs() before using test_fp_ctl(). |
| CVE-2023-52597 | In the Linux kernel, the following vulnerability has been resolved: KVM: s390: fix setting of fpc register kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control (fpc) register of a guest cpu. The new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the host process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space / host process fpc register value, however it will be discarded, when returning to user space. In result the host process will incorrectly continue to run with the value that was supposed to be used for a guest cpu. Fix this by simply removing the test. There is another test right before the SIE context is entered which will handles invalid values. This results in a change of behaviour: invalid values will now be accepted instead of that the ioctl fails with -EINVAL. This seems to be acceptable, given that this interface is most likely not used anymore, and this is in addition the same behaviour implemented with the memory mapped interface (replace invalid values with zero) - see sync_regs() in kvm-s390.c. |
| CVE-2023-52596 | In the Linux kernel, the following vulnerability has been resolved: sysctl: Fix out of bounds access for empty sysctl registers When registering tables to the sysctl subsystem there is a check to see if header is a permanently empty directory (used for mounts). This check evaluates the first element of the ctl_table. This results in an out of bounds evaluation when registering empty directories. The function register_sysctl_mount_point now passes a ctl_table of size 1 instead of size 0. It now relies solely on the type to identify a permanently empty register. Make sure that the ctl_table has at least one element before testing for permanent emptiness. |
| CVE-2023-52595 | In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: restart beacon queue when hardware reset When a hardware reset is triggered, all registers are reset, so all queues are forced to stop in hardware interface. However, mac80211 will not automatically stop the queue. If we don't manually stop the beacon queue, the queue will be deadlocked and unable to start again. This patch fixes the issue where Apple devices cannot connect to the AP after calling ieee80211_restart_hw(). |
| CVE-2023-52594 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: Fix potential array-index-out-of-bounds read in ath9k_htc_txstatus() Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug occurs when txs->cnt, data from a URB provided by a USB device, is bigger than the size of the array txs->txstatus, which is HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug handling code after the check. Make the function return if that is the case. Found by a modified version of syzkaller. UBSAN: array-index-out-of-bounds in htc_drv_txrx.c index 13 is out of range for type '__wmi_event_txstatus [12]' Call Trace: ath9k_htc_txstatus ath9k_wmi_event_tasklet tasklet_action_common __do_softirq irq_exit_rxu sysvec_apic_timer_interrupt |
| CVE-2023-52593 | In the Linux kernel, the following vulnerability has been resolved: wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap() Since 'ieee80211_beacon_get()' can return NULL, 'wfx_set_mfp_ap()' should check the return value before examining skb data. So convert the latter to return an appropriate error code and propagate it to return from 'wfx_start_ap()' as well. Compile tested only. |
| CVE-2023-52591 | In the Linux kernel, the following vulnerability has been resolved: reiserfs: Avoid touching renamed directory if parent does not change The VFS will not be locking moved directory if its parent does not change. Change reiserfs rename code to avoid touching renamed directory if its parent does not change as without locking that can corrupt the filesystem. |
| CVE-2023-52590 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: Avoid touching renamed directory if parent does not change The VFS will not be locking moved directory if its parent does not change. Change ocfs2 rename code to avoid touching renamed directory if its parent does not change as without locking that can corrupt the filesystem. |
| CVE-2023-52589 | In the Linux kernel, the following vulnerability has been resolved: media: rkisp1: Fix IRQ disable race issue In rkisp1_isp_stop() and rkisp1_csi_disable() the driver masks the interrupts and then apparently assumes that the interrupt handler won't be running, and proceeds in the stop procedure. This is not the case, as the interrupt handler can already be running, which would lead to the ISP being disabled while the interrupt handler handling a captured frame. This brings up two issues: 1) the ISP could be powered off while the interrupt handler is still running and accessing registers, leading to board lockup, and 2) the interrupt handler code and the code that disables the streaming might do things that conflict. It is not clear to me if 2) causes a real issue, but 1) can be seen with a suitable delay (or printk in my case) in the interrupt handler, leading to board lockup. |
| CVE-2023-52588 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to tag gcing flag on page during block migration It needs to add missing gcing flag on page during block migration, in order to garantee migrated data be persisted during checkpoint, otherwise out-of-order persistency between data and node may cause data corruption after SPOR. Similar issue was fixed by commit 2d1fe8a86bf5 ("f2fs: fix to tag gcing flag on page during file defragment"). |
| CVE-2023-52587 | In the Linux kernel, the following vulnerability has been resolved: IB/ipoib: Fix mcast list locking Releasing the `priv->lock` while iterating the `priv->multicast_list` in `ipoib_mcast_join_task()` opens a window for `ipoib_mcast_dev_flush()` to remove the items while in the middle of iteration. If the mcast is removed while the lock was dropped, the for loop spins forever resulting in a hard lockup (as was reported on RHEL 4.18.0-372.75.1.el8_6 kernel): Task A (kworker/u72:2 below) | Task B (kworker/u72:0 below) -----------------------------------+----------------------------------- ipoib_mcast_join_task(work) | ipoib_ib_dev_flush_light(work) spin_lock_irq(&priv->lock) | __ipoib_ib_dev_flush(priv, ...) list_for_each_entry(mcast, | ipoib_mcast_dev_flush(dev = priv->dev) &priv->multicast_list, list) | ipoib_mcast_join(dev, mcast) | spin_unlock_irq(&priv->lock) | | spin_lock_irqsave(&priv->lock, flags) | list_for_each_entry_safe(mcast, tmcast, | &priv->multicast_list, list) | list_del(&mcast->list); | list_add_tail(&mcast->list, &remove_list) | spin_unlock_irqrestore(&priv->lock, flags) spin_lock_irq(&priv->lock) | | ipoib_mcast_remove_list(&remove_list) (Here, `mcast` is no longer on the | list_for_each_entry_safe(mcast, tmcast, `priv->multicast_list` and we keep | remove_list, list) spinning on the `remove_list` of | >>> wait_for_completion(&mcast->done) the other thread which is blocked | and the list is still valid on | it's stack.) Fix this by keeping the lock held and changing to GFP_ATOMIC to prevent eventual sleeps. Unfortunately we could not reproduce the lockup and confirm this fix but based on the code review I think this fix should address such lockups. crash> bc 31 PID: 747 TASK: ff1c6a1a007e8000 CPU: 31 COMMAND: "kworker/u72:2" -- [exception RIP: ipoib_mcast_join_task+0x1b1] RIP: ffffffffc0944ac1 RSP: ff646f199a8c7e00 RFLAGS: 00000002 RAX: 0000000000000000 RBX: ff1c6a1a04dc82f8 RCX: 0000000000000000 work (&priv->mcast_task{,.work}) RDX: ff1c6a192d60ac68 RSI: 0000000000000286 RDI: ff1c6a1a04dc8000 &mcast->list RBP: ff646f199a8c7e90 R8: ff1c699980019420 R9: ff1c6a1920c9a000 R10: ff646f199a8c7e00 R11: ff1c6a191a7d9800 R12: ff1c6a192d60ac00 mcast R13: ff1c6a1d82200000 R14: ff1c6a1a04dc8000 R15: ff1c6a1a04dc82d8 dev priv (&priv->lock) &priv->multicast_list (aka head) ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 --- <NMI exception stack> --- #5 [ff646f199a8c7e00] ipoib_mcast_join_task+0x1b1 at ffffffffc0944ac1 [ib_ipoib] #6 [ff646f199a8c7e98] process_one_work+0x1a7 at ffffffff9bf10967 crash> rx ff646f199a8c7e68 ff646f199a8c7e68: ff1c6a1a04dc82f8 <<< work = &priv->mcast_task.work crash> list -hO ipoib_dev_priv.multicast_list ff1c6a1a04dc8000 (empty) crash> ipoib_dev_priv.mcast_task.work.func,mcast_mutex.owner.counter ff1c6a1a04dc8000 mcast_task.work.func = 0xffffffffc0944910 <ipoib_mcast_join_task>, mcast_mutex.owner.counter = 0xff1c69998efec000 crash> b 8 PID: 8 TASK: ff1c69998efec000 CPU: 33 COMMAND: "kworker/u72:0" -- #3 [ff646f1980153d50] wait_for_completion+0x96 at ffffffff9c7d7646 #4 [ff646f1980153d90] ipoib_mcast_remove_list+0x56 at ffffffffc0944dc6 [ib_ipoib] #5 [ff646f1980153de8] ipoib_mcast_dev_flush+0x1a7 at ffffffffc09455a7 [ib_ipoib] #6 [ff646f1980153e58] __ipoib_ib_dev_flush+0x1a4 at ffffffffc09431a4 [ib_ipoib] #7 [ff ---truncated--- |
| CVE-2023-52586 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add mutex lock in control vblank irq Add a mutex lock to control vblank irq to synchronize vblank enable/disable operations happening from different threads to prevent race conditions while registering/unregistering the vblank irq callback. v4: -Removed vblank_ctl_lock from dpu_encoder_virt, so it is only a parameter of dpu_encoder_phys. -Switch from atomic refcnt to a simple int counter as mutex has now been added v3: Mistakenly did not change wording in last version. It is done now. v2: Slightly changed wording of commit message Patchwork: https://patchwork.freedesktop.org/patch/571854/ |
| CVE-2023-52585 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix possible NULL dereference in amdgpu_ras_query_error_status_helper() Return invalid error code -EINVAL for invalid block id. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1183 amdgpu_ras_query_error_status_helper() error: we previously assumed 'info' could be null (see line 1176) |
| CVE-2023-52584 | In the Linux kernel, the following vulnerability has been resolved: spmi: mediatek: Fix UAF on device remove The pmif driver data that contains the clocks is allocated along with spmi_controller. On device remove, spmi_controller will be freed first, and then devres , including the clocks, will be cleanup. This leads to UAF because putting the clocks will access the clocks in the pmif driver data, which is already freed along with spmi_controller. This can be reproduced by enabling DEBUG_TEST_DRIVER_REMOVE and building the kernel with KASAN. Fix the UAF issue by using unmanaged clk_bulk_get() and putting the clocks before freeing spmi_controller. |
| CVE-2023-52583 | In the Linux kernel, the following vulnerability has been resolved: ceph: fix deadlock or deadcode of misusing dget() The lock order is incorrect between denty and its parent, we should always make sure that the parent get the lock first. But since this deadcode is never used and the parent dir will always be set from the callers, let's just remove it. |
| CVE-2023-52582 | In the Linux kernel, the following vulnerability has been resolved: netfs: Only call folio_start_fscache() one time for each folio If a network filesystem using netfs implements a clamp_length() function, it can set subrequest lengths smaller than a page size. When we loop through the folios in netfs_rreq_unlock_folios() to set any folios to be written back, we need to make sure we only call folio_start_fscache() once for each folio. Otherwise, this simple testcase: mount -o fsc,rsize=1024,wsize=1024 127.0.0.1:/export /mnt/nfs dd if=/dev/zero of=/mnt/nfs/file.bin bs=4096 count=1 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.0126359 s, 324 kB/s echo 3 > /proc/sys/vm/drop_caches cat /mnt/nfs/file.bin > /dev/null will trigger an oops similar to the following: page dumped because: VM_BUG_ON_FOLIO(folio_test_private_2(folio)) ------------[ cut here ]------------ kernel BUG at include/linux/netfs.h:44! ... CPU: 5 PID: 134 Comm: kworker/u16:5 Kdump: loaded Not tainted 6.4.0-rc5 ... RIP: 0010:netfs_rreq_unlock_folios+0x68e/0x730 [netfs] ... Call Trace: netfs_rreq_assess+0x497/0x660 [netfs] netfs_subreq_terminated+0x32b/0x610 [netfs] nfs_netfs_read_completion+0x14e/0x1a0 [nfs] nfs_read_completion+0x2f9/0x330 [nfs] rpc_free_task+0x72/0xa0 [sunrpc] rpc_async_release+0x46/0x70 [sunrpc] process_one_work+0x3bd/0x710 worker_thread+0x89/0x610 kthread+0x181/0x1c0 ret_from_fork+0x29/0x50 |
| CVE-2023-52581 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix memleak when more than 255 elements expired When more than 255 elements expired we're supposed to switch to a new gc container structure. This never happens: u8 type will wrap before reaching the boundary and nft_trans_gc_space() always returns true. This means we recycle the initial gc container structure and lose track of the elements that came before. While at it, don't deref 'gc' after we've passed it to call_rcu. |
| CVE-2023-52580 | In the Linux kernel, the following vulnerability has been resolved: net/core: Fix ETH_P_1588 flow dissector When a PTP ethernet raw frame with a size of more than 256 bytes followed by a 0xff pattern is sent to __skb_flow_dissect, nhoff value calculation is wrong. For example: hdr->message_length takes the wrong value (0xffff) and it does not replicate real header length. In this case, 'nhoff' value was overridden and the PTP header was badly dissected. This leads to a kernel crash. net/core: flow_dissector net/core flow dissector nhoff = 0x0000000e net/core flow dissector hdr->message_length = 0x0000ffff net/core flow dissector nhoff = 0x0001000d (u16 overflow) ... skb linear: 00000000: 00 a0 c9 00 00 00 00 a0 c9 00 00 00 88 skb frag: 00000000: f7 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Using the size of the ptp_header struct will allow the corrected calculation of the nhoff value. net/core flow dissector nhoff = 0x0000000e net/core flow dissector nhoff = 0x00000030 (sizeof ptp_header) ... skb linear: 00000000: 00 a0 c9 00 00 00 00 a0 c9 00 00 00 88 f7 ff ff skb linear: 00000010: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff skb linear: 00000020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff skb frag: 00000000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Kernel trace: [ 74.984279] ------------[ cut here ]------------ [ 74.989471] kernel BUG at include/linux/skbuff.h:2440! [ 74.995237] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 75.001098] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G U 5.15.85-intel-ese-standard-lts #1 [ 75.011629] Hardware name: Intel Corporation A-Island (CPU:AlderLake)/A-Island (ID:06), BIOS SB_ADLP.01.01.00.01.03.008.D-6A9D9E73-dirty Mar 30 2023 [ 75.026507] RIP: 0010:eth_type_trans+0xd0/0x130 [ 75.031594] Code: 03 88 47 78 eb c7 8b 47 68 2b 47 6c 48 8b 97 c0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb ab <0f> 0b b8 00 01 00 00 eb a2 48 85 ff 74 eb 48 8d 54 24 06 31 f6 b9 [ 75.052612] RSP: 0018:ffff9948c0228de0 EFLAGS: 00010297 [ 75.058473] RAX: 00000000000003f2 RBX: ffff8e47047dc300 RCX: 0000000000001003 [ 75.066462] RDX: ffff8e4e8c9ea040 RSI: ffff8e4704e0a000 RDI: ffff8e47047dc300 [ 75.074458] RBP: ffff8e4704e2acc0 R08: 00000000000003f3 R09: 0000000000000800 [ 75.082466] R10: 000000000000000d R11: ffff9948c0228dec R12: ffff8e4715e4e010 [ 75.090461] R13: ffff9948c0545018 R14: 0000000000000001 R15: 0000000000000800 [ 75.098464] FS: 0000000000000000(0000) GS:ffff8e4e8fb00000(0000) knlGS:0000000000000000 [ 75.107530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 75.113982] CR2: 00007f5eb35934a0 CR3: 0000000150e0a002 CR4: 0000000000770ee0 [ 75.121980] PKRU: 55555554 [ 75.125035] Call Trace: [ 75.127792] <IRQ> [ 75.130063] ? eth_get_headlen+0xa4/0xc0 [ 75.134472] igc_process_skb_fields+0xcd/0x150 [ 75.139461] igc_poll+0xc80/0x17b0 [ 75.143272] __napi_poll+0x27/0x170 [ 75.147192] net_rx_action+0x234/0x280 [ 75.151409] __do_softirq+0xef/0x2f4 [ 75.155424] irq_exit_rcu+0xc7/0x110 [ 75.159432] common_interrupt+0xb8/0xd0 [ 75.163748] </IRQ> [ 75.166112] <TASK> [ 75.168473] asm_common_interrupt+0x22/0x40 [ 75.173175] RIP: 0010:cpuidle_enter_state+0xe2/0x350 [ 75.178749] Code: 85 c0 0f 8f 04 02 00 00 31 ff e8 39 6c 67 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 50 02 00 00 31 ff e8 52 b0 6d ff fb 45 85 f6 <0f> 88 b1 00 00 00 49 63 ce 4c 2b 2c 24 48 89 c8 48 6b d1 68 48 c1 [ 75.199757] RSP: 0018:ffff9948c013bea8 EFLAGS: 00000202 [ 75.205614] RAX: ffff8e4e8fb00000 RBX: ffffb948bfd23900 RCX: 000000000000001f [ 75.213619] RDX: 0000000000000004 RSI: ffffffff94206161 RDI: ffffffff94212e20 [ 75.221620] RBP: 0000000000000004 R08: 000000117568973a R09: 0000000000000001 [ 75.229622] R10: 000000000000afc8 R11: ffff8e4e8fb29ce4 R12: ffffffff945ae980 [ 75.237628] R13: 000000117568973a R14: 0000000000000004 R15: 0000000000000000 [ 75.245635] ? ---truncated--- |
| CVE-2023-52578 | In the Linux kernel, the following vulnerability has been resolved: net: bridge: use DEV_STATS_INC() syzbot/KCSAN reported data-races in br_handle_frame_finish() [1] This function can run from multiple cpus without mutual exclusion. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Handles updates to dev->stats.tx_dropped while we are at it. [1] BUG: KCSAN: data-race in br_handle_frame_finish / br_handle_frame_finish read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 1: br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189 br_nf_hook_thresh+0x1ed/0x220 br_nf_pre_routing_finish_ipv6+0x50f/0x540 NF_HOOK include/linux/netfilter.h:304 [inline] br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178 br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508 nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline] nf_hook_bridge_pre net/bridge/br_input.c:272 [inline] br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417 __netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417 __netif_receive_skb_one_core net/core/dev.c:5521 [inline] __netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637 process_backlog+0x21f/0x380 net/core/dev.c:5965 __napi_poll+0x60/0x3b0 net/core/dev.c:6527 napi_poll net/core/dev.c:6594 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6727 __do_softirq+0xc1/0x265 kernel/softirq.c:553 run_ksoftirqd+0x17/0x20 kernel/softirq.c:921 smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164 kthread+0x1d7/0x210 kernel/kthread.c:388 ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 0: br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189 br_nf_hook_thresh+0x1ed/0x220 br_nf_pre_routing_finish_ipv6+0x50f/0x540 NF_HOOK include/linux/netfilter.h:304 [inline] br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178 br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508 nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline] nf_hook_bridge_pre net/bridge/br_input.c:272 [inline] br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417 __netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417 __netif_receive_skb_one_core net/core/dev.c:5521 [inline] __netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637 process_backlog+0x21f/0x380 net/core/dev.c:5965 __napi_poll+0x60/0x3b0 net/core/dev.c:6527 napi_poll net/core/dev.c:6594 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6727 __do_softirq+0xc1/0x265 kernel/softirq.c:553 do_softirq+0x5e/0x90 kernel/softirq.c:454 __local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] batadv_tt_local_purge+0x1a8/0x1f0 net/batman-adv/translation-table.c:1356 batadv_tt_purge+0x2b/0x630 net/batman-adv/translation-table.c:3560 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703 worker_thread+0x525/0x730 kernel/workqueue.c:2784 kthread+0x1d7/0x210 kernel/kthread.c:388 ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 value changed: 0x00000000000d7190 -> 0x00000000000d7191 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 14848 Comm: kworker/u4:11 Not tainted 6.6.0-rc1-syzkaller-00236-gad8a69f361b9 #0 |
| CVE-2023-52577 | In the Linux kernel, the following vulnerability has been resolved: dccp: fix dccp_v4_err()/dccp_v6_err() again dh->dccph_x is the 9th byte (offset 8) in "struct dccp_hdr", not in the "byte 7" as Jann claimed. We need to make sure the ICMP messages are big enough, using more standard ways (no more assumptions). syzbot reported: BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2667 [inline] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2681 [inline] BUG: KMSAN: uninit-value in dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94 pskb_may_pull_reason include/linux/skbuff.h:2667 [inline] pskb_may_pull include/linux/skbuff.h:2681 [inline] dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94 icmpv6_notify+0x4c7/0x880 net/ipv6/icmp.c:867 icmpv6_rcv+0x19d5/0x30d0 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:304 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:304 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5523 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637 netif_receive_skb_internal net/core/dev.c:5723 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5782 tun_rx_batched+0x83b/0x920 tun_get_user+0x564c/0x6940 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:1985 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x15c0 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6313 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2795 tun_alloc_skb drivers/net/tun.c:1531 [inline] tun_get_user+0x23cf/0x6940 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:1985 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x15c0 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 4995 Comm: syz-executor153 Not tainted 6.6.0-rc1-syzkaller-00014-ga747acc0b752 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 |
| CVE-2023-52576 | In the Linux kernel, the following vulnerability has been resolved: x86/mm, kexec, ima: Use memblock_free_late() from ima_free_kexec_buffer() The code calling ima_free_kexec_buffer() runs long after the memblock allocator has already been torn down, potentially resulting in a use after free in memblock_isolate_range(). With KASAN or KFENCE, this use after free will result in a BUG from the idle task, and a subsequent kernel panic. Switch ima_free_kexec_buffer() over to memblock_free_late() to avoid that bug. |
| CVE-2023-52574 | In the Linux kernel, the following vulnerability has been resolved: team: fix null-ptr-deref when team device type is changed Get a null-ptr-deref bug as follows with reproducer [1]. BUG: kernel NULL pointer dereference, address: 0000000000000228 ... RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q] ... Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x150 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? vlan_dev_hard_header+0x35/0x140 [8021q] ? vlan_dev_hard_header+0x8e/0x140 [8021q] neigh_connected_output+0xb2/0x100 ip6_finish_output2+0x1cb/0x520 ? nf_hook_slow+0x43/0xc0 ? ip6_mtu+0x46/0x80 ip6_finish_output+0x2a/0xb0 mld_sendpack+0x18f/0x250 mld_ifc_work+0x39/0x160 process_one_work+0x1e6/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 [1] $ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}' $ ip link add name t-dummy type dummy $ ip link add link t-dummy name t-dummy.100 type vlan id 100 $ ip link add name t-nlmon type nlmon $ ip link set t-nlmon master team0 $ ip link set t-nlmon nomaster $ ip link set t-dummy up $ ip link set team0 up $ ip link set t-dummy.100 down $ ip link set t-dummy.100 master team0 When enslave a vlan device to team device and team device type is changed from non-ether to ether, header_ops of team device is changed to vlan_header_ops. That is incorrect and will trigger null-ptr-deref for vlan->real_dev in vlan_dev_hard_header() because team device is not a vlan device. Cache eth_header_ops in team_setup(), then assign cached header_ops to header_ops of team net device when its type is changed from non-ether to ether to fix the bug. |
| CVE-2023-52573 | In the Linux kernel, the following vulnerability has been resolved: net: rds: Fix possible NULL-pointer dereference In rds_rdma_cm_event_handler_cmn() check, if conn pointer exists before dereferencing it as rdma_set_service_type() argument Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2023-52572 | In the Linux kernel, the following vulnerability has been resolved: cifs: Fix UAF in cifs_demultiplex_thread() There is a UAF when xfstests on cifs: BUG: KASAN: use-after-free in smb2_is_network_name_deleted+0x27/0x160 Read of size 4 at addr ffff88810103fc08 by task cifsd/923 CPU: 1 PID: 923 Comm: cifsd Not tainted 6.1.0-rc4+ #45 ... Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 kasan_check_range+0x145/0x1a0 smb2_is_network_name_deleted+0x27/0x160 cifs_demultiplex_thread.cold+0x172/0x5a4 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 923: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_slab_alloc+0x54/0x60 kmem_cache_alloc+0x147/0x320 mempool_alloc+0xe1/0x260 cifs_small_buf_get+0x24/0x60 allocate_buffers+0xa1/0x1c0 cifs_demultiplex_thread+0x199/0x10d0 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30 Freed by task 921: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x143/0x1b0 kmem_cache_free+0xe3/0x4d0 cifs_small_buf_release+0x29/0x90 SMB2_negotiate+0x8b7/0x1c60 smb2_negotiate+0x51/0x70 cifs_negotiate_protocol+0xf0/0x160 cifs_get_smb_ses+0x5fa/0x13c0 mount_get_conns+0x7a/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The UAF is because: mount(pid: 921) | cifsd(pid: 923) -------------------------------|------------------------------- | cifs_demultiplex_thread SMB2_negotiate | cifs_send_recv | compound_send_recv | smb_send_rqst | wait_for_response | wait_event_state [1] | | standard_receive3 | cifs_handle_standard | handle_mid | mid->resp_buf = buf; [2] | dequeue_mid [3] KILL the process [4] | resp_iov[i].iov_base = buf | free_rsp_buf [5] | | is_network_name_deleted [6] | callback 1. After send request to server, wait the response until mid->mid_state != SUBMITTED; 2. Receive response from server, and set it to mid; 3. Set the mid state to RECEIVED; 4. Kill the process, the mid state already RECEIVED, get 0; 5. Handle and release the negotiate response; 6. UAF. It can be easily reproduce with add some delay in [3] - [6]. Only sync call has the problem since async call's callback is executed in cifsd process. Add an extra state to mark the mid state to READY before wakeup the waitter, then it can get the resp safely. |
| CVE-2023-52571 | In the Linux kernel, the following vulnerability has been resolved: power: supply: rk817: Fix node refcount leak Dan Carpenter reports that the Smatch static checker warning has found that there is another refcount leak in the probe function. While of_node_put() was added in one of the return paths, it should in fact be added for ALL return paths that return an error and at driver removal time. |
| CVE-2023-52570 | In the Linux kernel, the following vulnerability has been resolved: vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent() Inject fault while probing mdpy.ko, if kstrdup() of create_dir() fails in kobject_add_internal() in kobject_init_and_add() in mdev_type_add() in parent_create_sysfs_files(), it will return 0 and probe successfully. And when rmmod mdpy.ko, the mdpy_dev_exit() will call mdev_unregister_parent(), the mdev_type_remove() may traverse uninitialized parent->types[i] in parent_remove_sysfs_files(), and it will cause below null-ptr-deref. If mdev_type_add() fails, return the error code and kset_unregister() to fix the issue. general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 2 PID: 10215 Comm: rmmod Tainted: G W N 6.6.0-rc2+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? __kobject_del+0x62/0x1c0 kobject_del+0x32/0x50 parent_remove_sysfs_files+0xd6/0x170 [mdev] mdev_unregister_parent+0xfb/0x190 [mdev] ? mdev_register_parent+0x270/0x270 [mdev] ? find_module_all+0x9d/0xe0 mdpy_dev_exit+0x17/0x63 [mdpy] __do_sys_delete_module.constprop.0+0x2fa/0x4b0 ? module_flags+0x300/0x300 ? __fput+0x4e7/0xa00 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fbc813221b7 Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe780e0648 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00007ffe780e06a8 RCX: 00007fbc813221b7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055e214df9b58 RBP: 000055e214df9af0 R08: 00007ffe780df5c1 R09: 0000000000000000 R10: 00007fbc8139ecc0 R11: 0000000000000206 R12: 00007ffe780e0870 R13: 00007ffe780e0ed0 R14: 000055e214df9260 R15: 000055e214df9af0 </TASK> Modules linked in: mdpy(-) mdev vfio_iommu_type1 vfio [last unloaded: mdpy] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(000 ---truncated--- |
| CVE-2023-52569 | In the Linux kernel, the following vulnerability has been resolved: btrfs: remove BUG() after failure to insert delayed dir index item Instead of calling BUG() when we fail to insert a delayed dir index item into the delayed node's tree, we can just release all the resources we have allocated/acquired before and return the error to the caller. This is fine because all existing call chains undo anything they have done before calling btrfs_insert_delayed_dir_index() or BUG_ON (when creating pending snapshots in the transaction commit path). So remove the BUG() call and do proper error handling. This relates to a syzbot report linked below, but does not fix it because it only prevents hitting a BUG(), it does not fix the issue where somehow we attempt to use twice the same index number for different index items. |
| CVE-2023-52568 | In the Linux kernel, the following vulnerability has been resolved: x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race The SGX EPC reclaimer (ksgxd) may reclaim the SECS EPC page for an enclave and set secs.epc_page to NULL. The SECS page is used for EAUG and ELDU in the SGX page fault handler. However, the NULL check for secs.epc_page is only done for ELDU, not EAUG before being used. Fix this by doing the same NULL check and reloading of the SECS page as needed for both EAUG and ELDU. The SECS page holds global enclave metadata. It can only be reclaimed when there are no other enclave pages remaining. At that point, virtually nothing can be done with the enclave until the SECS page is paged back in. An enclave can not run nor generate page faults without a resident SECS page. But it is still possible for a #PF for a non-SECS page to race with paging out the SECS page: when the last resident non-SECS page A triggers a #PF in a non-resident page B, and then page A and the SECS both are paged out before the #PF on B is handled. Hitting this bug requires that race triggered with a #PF for EAUG. Following is a trace when it happens. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:sgx_encl_eaug_page+0xc7/0x210 Call Trace: ? __kmem_cache_alloc_node+0x16a/0x440 ? xa_load+0x6e/0xa0 sgx_vma_fault+0x119/0x230 __do_fault+0x36/0x140 do_fault+0x12f/0x400 __handle_mm_fault+0x728/0x1110 handle_mm_fault+0x105/0x310 do_user_addr_fault+0x1ee/0x750 ? __this_cpu_preempt_check+0x13/0x20 exc_page_fault+0x76/0x180 asm_exc_page_fault+0x27/0x30 |
| CVE-2023-52567 | In the Linux kernel, the following vulnerability has been resolved: serial: 8250_port: Check IRQ data before use In case the leaf driver wants to use IRQ polling (irq = 0) and IIR register shows that an interrupt happened in the 8250 hardware the IRQ data can be NULL. In such a case we need to skip the wake event as we came to this path from the timer interrupt and quite likely system is already awake. Without this fix we have got an Oops: serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A ... BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:serial8250_handle_irq+0x7c/0x240 Call Trace: ? serial8250_handle_irq+0x7c/0x240 ? __pfx_serial8250_timeout+0x10/0x10 |
| CVE-2023-52566 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() In nilfs_gccache_submit_read_data(), brelse(bh) is called to drop the reference count of bh when the call to nilfs_dat_translate() fails. If the reference count hits 0 and its owner page gets unlocked, bh may be freed. However, bh->b_page is dereferenced to put the page after that, which may result in a use-after-free bug. This patch moves the release operation after unlocking and putting the page. NOTE: The function in question is only called in GC, and in combination with current userland tools, address translation using DAT does not occur in that function, so the code path that causes this issue will not be executed. However, it is possible to run that code path by intentionally modifying the userland GC library or by calling the GC ioctl directly. [[email protected]: NOTE added to the commit log] |
| CVE-2023-52565 | In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix OOB read If the index provided by the user is bigger than the mask size, we might do an out of bound read. |
| CVE-2023-52564 | In the Linux kernel, the following vulnerability has been resolved: Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux" This reverts commit 9b9c8195f3f0d74a826077fc1c01b9ee74907239. The commit above is reverted as it did not solve the original issue. gsm_cleanup_mux() tries to free up the virtual ttys by calling gsm_dlci_release() for each available DLCI. There, dlci_put() is called to decrease the reference counter for the DLCI via tty_port_put() which finally calls gsm_dlci_free(). This already clears the pointer which is being checked in gsm_cleanup_mux() before calling gsm_dlci_release(). Therefore, it is not necessary to clear this pointer in gsm_cleanup_mux() as done in the reverted commit. The commit introduces a null pointer dereference: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x156/0x420 ? search_exception_tables+0x37/0x50 ? fixup_exception+0x21/0x310 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? tty_port_put+0x19/0xa0 gsmtty_cleanup+0x29/0x80 [n_gsm] release_one_tty+0x37/0xe0 process_one_work+0x1e6/0x3e0 worker_thread+0x4c/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe1/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The actual issue is that nothing guards dlci_put() from being called multiple times while the tty driver was triggered but did not yet finished calling gsm_dlci_free(). |
| CVE-2023-52563 | In the Linux kernel, the following vulnerability has been resolved: drm/meson: fix memory leak on ->hpd_notify callback The EDID returned by drm_bridge_get_edid() needs to be freed. |
| CVE-2023-52562 | In the Linux kernel, the following vulnerability has been resolved: mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy() After the commit in Fixes:, if a module that created a slab cache does not release all of its allocated objects before destroying the cache (at rmmod time), we might end up releasing the kmem_cache object without removing it from the slab_caches list thus corrupting the list as kmem_cache_destroy() ignores the return value from shutdown_cache(), which in turn never removes the kmem_cache object from slabs_list in case __kmem_cache_shutdown() fails to release all of the cache's slabs. This is easily observable on a kernel built with CONFIG_DEBUG_LIST=y as after that ill release the system will immediately trip on list_add, or list_del, assertions similar to the one shown below as soon as another kmem_cache gets created, or destroyed: [ 1041.213632] list_del corruption. next->prev should be ffff89f596fb5768, but was 52f1e5016aeee75d. (next=ffff89f595a1b268) [ 1041.219165] ------------[ cut here ]------------ [ 1041.221517] kernel BUG at lib/list_debug.c:62! [ 1041.223452] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 1041.225408] CPU: 2 PID: 1852 Comm: rmmod Kdump: loaded Tainted: G B W OE 6.5.0 #15 [ 1041.228244] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023 [ 1041.231212] RIP: 0010:__list_del_entry_valid+0xae/0xb0 Another quick way to trigger this issue, in a kernel with CONFIG_SLUB=y, is to set slub_debug to poison the released objects and then just run cat /proc/slabinfo after removing the module that leaks slab objects, in which case the kernel will panic: [ 50.954843] general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 [#1] PREEMPT SMP PTI [ 50.961545] CPU: 2 PID: 1495 Comm: cat Kdump: loaded Tainted: G B W OE 6.5.0 #15 [ 50.966808] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023 [ 50.972663] RIP: 0010:get_slabinfo+0x42/0xf0 This patch fixes this issue by properly checking shutdown_cache()'s return value before taking the kmem_cache_release() branch. |
| CVE-2023-52561 | In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved Adding a reserved memory region for the framebuffer memory (the splash memory region set up by the bootloader). It fixes a kernel panic (arm-smmu: Unhandled context fault at this particular memory region) reported on DB845c running v5.10.y. |
| CVE-2023-52560 | In the Linux kernel, the following vulnerability has been resolved: mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() When CONFIG_DAMON_VADDR_KUNIT_TEST=y and making CONFIG_DEBUG_KMEMLEAK=y and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected. Since commit 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables"), the damon_destroy_ctx() is removed, but still call damon_new_target() and damon_new_region(), the damon_region which is allocated by kmem_cache_alloc() in damon_new_region() and the damon_target which is allocated by kmalloc in damon_new_target() are not freed. And the damon_region which is allocated in damon_new_region() in damon_set_regions() is also not freed. So use damon_destroy_target to free all the damon_regions and damon_target. unreferenced object 0xffff888107c9a940 (size 64): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk 60 c7 9c 07 81 88 ff ff f8 cb 9c 07 81 88 ff ff `............... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079cc740 (size 56): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888107c9ac40 (size 64): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk a0 cc 9c 07 81 88 ff ff 78 a1 76 07 81 88 ff ff ........x.v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079ccc80 (size 56): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffff ---truncated--- |
| CVE-2023-52559 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid memory allocation in iommu_suspend() The iommu_suspend() syscore suspend callback is invoked with IRQ disabled. Allocating memory with the GFP_KERNEL flag may re-enable IRQs during the suspend callback, which can cause intermittent suspend/hibernation problems with the following kernel traces: Calling iommu_suspend+0x0/0x1d0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 15 at kernel/time/timekeeping.c:868 ktime_get+0x9b/0xb0 ... CPU: 0 PID: 15 Comm: rcu_preempt Tainted: G U E 6.3-intel #r1 RIP: 0010:ktime_get+0x9b/0xb0 ... Call Trace: <IRQ> tick_sched_timer+0x22/0x90 ? __pfx_tick_sched_timer+0x10/0x10 __hrtimer_run_queues+0x111/0x2b0 hrtimer_interrupt+0xfa/0x230 __sysvec_apic_timer_interrupt+0x63/0x140 sysvec_apic_timer_interrupt+0x7b/0xa0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1f/0x30 ... ------------[ cut here ]------------ Interrupts enabled after iommu_suspend+0x0/0x1d0 WARNING: CPU: 0 PID: 27420 at drivers/base/syscore.c:68 syscore_suspend+0x147/0x270 CPU: 0 PID: 27420 Comm: rtcwake Tainted: G U W E 6.3-intel #r1 RIP: 0010:syscore_suspend+0x147/0x270 ... Call Trace: <TASK> hibernation_snapshot+0x25b/0x670 hibernate+0xcd/0x390 state_store+0xcf/0xe0 kobj_attr_store+0x13/0x30 sysfs_kf_write+0x3f/0x50 kernfs_fop_write_iter+0x128/0x200 vfs_write+0x1fd/0x3c0 ksys_write+0x6f/0xf0 __x64_sys_write+0x1d/0x30 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Given that only 4 words memory is needed, avoid the memory allocation in iommu_suspend(). |
| CVE-2023-52532 | In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix TX CQE error handling For an unknown TX CQE error type (probably from a newer hardware), still free the SKB, update the queue tail, etc., otherwise the accounting will be wrong. Also, TX errors can be triggered by injecting corrupted packets, so replace the WARN_ONCE to ratelimited error logging. |
| CVE-2023-52531 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: Fix a memory corruption issue A few lines above, space is kzalloc()'ed for: sizeof(struct iwl_nvm_data) + sizeof(struct ieee80211_channel) + sizeof(struct ieee80211_rate) 'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is fine. At the end of this structure, there is the 'channels' flex array. Each element is of type 'struct ieee80211_channel'. So only 1 element is allocated in this array. When doing: mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels; We point at the first element of the 'channels' flex array. So this is fine. However, when doing: mvm->nvm_data->bands[0].bitrates = (void *)((u8 *)mvm->nvm_data->channels + 1); because of the "(u8 *)" cast, we add only 1 to the address of the beginning of the flex array. It is likely that we want point at the 'struct ieee80211_rate' allocated just after. Remove the spurious casting so that the pointer arithmetic works as expected. |
| CVE-2023-52530 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix potential key use-after-free When ieee80211_key_link() is called by ieee80211_gtk_rekey_add() but returns 0 due to KRACK protection (identical key reinstall), ieee80211_gtk_rekey_add() will still return a pointer into the key, in a potential use-after-free. This normally doesn't happen since it's only called by iwlwifi in case of WoWLAN rekey offload which has its own KRACK protection, but still better to fix, do that by returning an error code and converting that to success on the cfg80211 boundary only, leaving the error for bad callers of ieee80211_gtk_rekey_add(). |
| CVE-2023-52529 | In the Linux kernel, the following vulnerability has been resolved: HID: sony: Fix a potential memory leak in sony_probe() If an error occurs after a successful usb_alloc_urb() call, usb_free_urb() should be called. |
| CVE-2023-52528 | In the Linux kernel, the following vulnerability has been resolved: net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg syzbot reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737 usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032 usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241 usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554 hub_port_connect drivers/usb/core/hub.c:5208 [inline] hub_port_connect_change drivers/usb/core/hub.c:5348 [inline] port_event drivers/usb/core/hub.c:5494 [inline] hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576 process_one_work+0x1688/0x2140 kernel/workqueue.c:2269 worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415 kthread+0x551/0x590 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Local variable ----buf.i87@smsc75xx_bind created at: __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 This issue is caused because usbnet_read_cmd() reads less bytes than requested (zero byte in the reproducer). In this case, 'buf' is not properly filled. This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads less bytes than requested. |
| CVE-2023-52527 | In the Linux kernel, the following vulnerability has been resolved: ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data() Including the transhdrlen in length is a problem when the packet is partially filled (e.g. something like send(MSG_MORE) happened previously) when appending to an IPv4 or IPv6 packet as we don't want to repeat the transport header or account for it twice. This can happen under some circumstances, such as splicing into an L2TP socket. The symptom observed is a warning in __ip6_append_data(): WARNING: CPU: 1 PID: 5042 at net/ipv6/ip6_output.c:1800 __ip6_append_data.isra.0+0x1be8/0x47f0 net/ipv6/ip6_output.c:1800 that occurs when MSG_SPLICE_PAGES is used to append more data to an already partially occupied skbuff. The warning occurs when 'copy' is larger than the amount of data in the message iterator. This is because the requested length includes the transport header length when it shouldn't. This can be triggered by, for example: sfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP); bind(sfd, ...); // ::1 connect(sfd, ...); // ::1 port 7 send(sfd, buffer, 4100, MSG_MORE); sendfile(sfd, dfd, NULL, 1024); Fix this by only adding transhdrlen into the length if the write queue is empty in l2tp_ip6_sendmsg(), analogously to how UDP does things. l2tp_ip_sendmsg() looks like it won't suffer from this problem as it builds the UDP packet itself. |
| CVE-2023-52526 | In the Linux kernel, the following vulnerability has been resolved: erofs: fix memory leak of LZMA global compressed deduplication When stressing microLZMA EROFS images with the new global compressed deduplication feature enabled (`-Ededupe`), I found some short-lived temporary pages weren't properly released, which could slowly cause unexpected OOMs hours later. Let's fix it now (LZ4 and DEFLATE don't have this issue.) |
| CVE-2023-52525 | In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet Only skip the code path trying to access the rfc1042 headers when the buffer is too small, so the driver can still process packets without rfc1042 headers. |
| CVE-2023-52524 | In the Linux kernel, the following vulnerability has been resolved: net: nfc: llcp: Add lock when modifying device list The device list needs its associated lock held when modifying it, or the list could become corrupted, as syzbot discovered. |
| CVE-2023-52523 | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets With a SOCKMAP/SOCKHASH map and an sk_msg program user can steer messages sent from one TCP socket (s1) to actually egress from another TCP socket (s2): tcp_bpf_sendmsg(s1) // = sk_prot->sendmsg tcp_bpf_send_verdict(s1) // __SK_REDIRECT case tcp_bpf_sendmsg_redir(s2) tcp_bpf_push_locked(s2) tcp_bpf_push(s2) tcp_rate_check_app_limited(s2) // expects tcp_sock tcp_sendmsg_locked(s2) // ditto There is a hard-coded assumption in the call-chain, that the egress socket (s2) is a TCP socket. However in commit 122e6c79efe1 ("sock_map: Update sock type checks for UDP") we have enabled redirects to non-TCP sockets. This was done for the sake of BPF sk_skb programs. There was no indention to support sk_msg send-to-egress use case. As a result, attempts to send-to-egress through a non-TCP socket lead to a crash due to invalid downcast from sock to tcp_sock: BUG: kernel NULL pointer dereference, address: 000000000000002f ... Call Trace: <TASK> ? show_regs+0x60/0x70 ? __die+0x1f/0x70 ? page_fault_oops+0x80/0x160 ? do_user_addr_fault+0x2d7/0x800 ? rcu_is_watching+0x11/0x50 ? exc_page_fault+0x70/0x1c0 ? asm_exc_page_fault+0x27/0x30 ? tcp_tso_segs+0x14/0xa0 tcp_write_xmit+0x67/0xce0 __tcp_push_pending_frames+0x32/0xf0 tcp_push+0x107/0x140 tcp_sendmsg_locked+0x99f/0xbb0 tcp_bpf_push+0x19d/0x3a0 tcp_bpf_sendmsg_redir+0x55/0xd0 tcp_bpf_send_verdict+0x407/0x550 tcp_bpf_sendmsg+0x1a1/0x390 inet_sendmsg+0x6a/0x70 sock_sendmsg+0x9d/0xc0 ? sockfd_lookup_light+0x12/0x80 __sys_sendto+0x10e/0x160 ? syscall_enter_from_user_mode+0x20/0x60 ? __this_cpu_preempt_check+0x13/0x20 ? lockdep_hardirqs_on+0x82/0x110 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Reject selecting a non-TCP sockets as redirect target from a BPF sk_msg program to prevent the crash. When attempted, user will receive an EACCES error from send/sendto/sendmsg() syscall. |
| CVE-2023-52522 | In the Linux kernel, the following vulnerability has been resolved: net: fix possible store tearing in neigh_periodic_work() While looking at a related syzbot report involving neigh_periodic_work(), I found that I forgot to add an annotation when deleting an RCU protected item from a list. Readers use rcu_deference(*np), we need to use either rcu_assign_pointer() or WRITE_ONCE() on writer side to prevent store tearing. I use rcu_assign_pointer() to have lockdep support, this was the choice made in neigh_flush_dev(). |
| CVE-2023-52520 | In the Linux kernel, the following vulnerability has been resolved: platform/x86: think-lmi: Fix reference leak If a duplicate attribute is found using kset_find_obj(), a reference to that attribute is returned which needs to be disposed accordingly using kobject_put(). Move the setting name validation into a separate function to allow for this change without having to duplicate the cleanup code for this setting. As a side note, a very similar bug was fixed in commit 7295a996fdab ("platform/x86: dell-sysman: Fix reference leak"), so it seems that the bug was copied from that driver. Compile-tested only. |
| CVE-2023-52519 | In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bit The EHL (Elkhart Lake) based platforms provide a OOB (Out of band) service, which allows to wakup device when the system is in S5 (Soft-Off state). This OOB service can be enabled/disabled from BIOS settings. When enabled, the ISH device gets PME wake capability. To enable PME wakeup, driver also needs to enable ACPI GPE bit. On resume, BIOS will clear the wakeup bit. So driver need to re-enable it in resume function to keep the next wakeup capability. But this BIOS clearing of wakeup bit doesn't decrement internal OS GPE reference count, so this reenabling on every resume will cause reference count to overflow. So first disable and reenable ACPI GPE bit using acpi_disable_gpe(). |
| CVE-2023-52518 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_codec: Fix leaking content of local_codecs The following memory leak can be observed when the controller supports codecs which are stored in local_codecs list but the elements are never freed: unreferenced object 0xffff88800221d840 (size 32): comm "kworker/u3:0", pid 36, jiffies 4294898739 (age 127.060s) hex dump (first 32 bytes): f8 d3 02 03 80 88 ff ff 80 d8 21 02 80 88 ff ff ..........!..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffb324f557>] __kmalloc+0x47/0x120 [<ffffffffb39ef37d>] hci_codec_list_add.isra.0+0x2d/0x160 [<ffffffffb39ef643>] hci_read_codec_capabilities+0x183/0x270 [<ffffffffb39ef9ab>] hci_read_supported_codecs+0x1bb/0x2d0 [<ffffffffb39f162e>] hci_read_local_codecs_sync+0x3e/0x60 [<ffffffffb39ff1b3>] hci_dev_open_sync+0x943/0x11e0 [<ffffffffb396d55d>] hci_power_on+0x10d/0x3f0 [<ffffffffb30c99b4>] process_one_work+0x404/0x800 [<ffffffffb30ca134>] worker_thread+0x374/0x670 [<ffffffffb30d9108>] kthread+0x188/0x1c0 [<ffffffffb304db6b>] ret_from_fork+0x2b/0x50 [<ffffffffb300206a>] ret_from_fork_asm+0x1a/0x30 |
| CVE-2023-52517 | In the Linux kernel, the following vulnerability has been resolved: spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain Previously the transfer complete IRQ immediately drained to RX FIFO to read any data remaining in FIFO to the RX buffer. This behaviour is correct when dealing with SPI in interrupt mode. However in DMA mode the transfer complete interrupt still fires as soon as all bytes to be transferred have been stored in the FIFO. At that point data in the FIFO still needs to be picked up by the DMA engine. Thus the drain procedure and DMA engine end up racing to read from RX FIFO, corrupting any data read. Additionally the RX buffer pointer is never adjusted according to DMA progress in DMA mode, thus calling the RX FIFO drain procedure in DMA mode is a bug. Fix corruptions in DMA RX mode by draining RX FIFO only in interrupt mode. Also wait for completion of RX DMA when in DMA mode before returning to ensure all data has been copied to the supplied memory buffer. |
| CVE-2023-52516 | In the Linux kernel, the following vulnerability has been resolved: dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock __dma_entry_alloc_check_leak() calls into printk -> serial console output (qcom geni) and grabs port->lock under free_entries_lock spin lock, which is a reverse locking dependency chain as qcom_geni IRQ handler can call into dma-debug code and grab free_entries_lock under port->lock. Move __dma_entry_alloc_check_leak() call out of free_entries_lock scope so that we don't acquire serial console's port->lock under it. Trimmed-down lockdep splat: The existing dependency chain (in reverse order) is: -> #2 (free_entries_lock){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 dma_entry_alloc+0x38/0x110 debug_dma_map_page+0x60/0xf8 dma_map_page_attrs+0x1e0/0x230 dma_map_single_attrs.constprop.0+0x6c/0xc8 geni_se_rx_dma_prep+0x40/0xcc qcom_geni_serial_isr+0x310/0x510 __handle_irq_event_percpu+0x110/0x244 handle_irq_event_percpu+0x20/0x54 handle_irq_event+0x50/0x88 handle_fasteoi_irq+0xa4/0xcc handle_irq_desc+0x28/0x40 generic_handle_domain_irq+0x24/0x30 gic_handle_irq+0xc4/0x148 do_interrupt_handler+0xa4/0xb0 el1_interrupt+0x34/0x64 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x64/0x68 arch_local_irq_enable+0x4/0x8 ____do_softirq+0x18/0x24 ... -> #1 (&port_lock_key){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 qcom_geni_serial_console_write+0x184/0x1dc console_flush_all+0x344/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 register_console+0x230/0x38c uart_add_one_port+0x338/0x494 qcom_geni_serial_probe+0x390/0x424 platform_probe+0x70/0xc0 really_probe+0x148/0x280 __driver_probe_device+0xfc/0x114 driver_probe_device+0x44/0x100 __device_attach_driver+0x64/0xdc bus_for_each_drv+0xb0/0xd8 __device_attach+0xe4/0x140 device_initial_probe+0x1c/0x28 bus_probe_device+0x44/0xb0 device_add+0x538/0x668 of_device_add+0x44/0x50 of_platform_device_create_pdata+0x94/0xc8 of_platform_bus_create+0x270/0x304 of_platform_populate+0xac/0xc4 devm_of_platform_populate+0x60/0xac geni_se_probe+0x154/0x160 platform_probe+0x70/0xc0 ... -> #0 (console_owner){-...}-{0:0}: __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 dma_entry_alloc+0xb4/0x110 debug_dma_map_sg+0xdc/0x2f8 __dma_map_sg_attrs+0xac/0xe4 dma_map_sgtable+0x30/0x4c get_pages+0x1d4/0x1e4 [msm] msm_gem_pin_pages_locked+0x38/0xac [msm] msm_gem_pin_vma_locked+0x58/0x88 [msm] msm_ioctl_gem_submit+0xde4/0x13ac [msm] drm_ioctl_kernel+0xe0/0x15c drm_ioctl+0x2e8/0x3f4 vfs_ioctl+0x30/0x50 ... Chain exists of: console_owner --> &port_lock_key --> free_entries_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(free_entries_lock); lock(&port_lock_key); lock(free_entries_lock); lock(console_owner); *** DEADLOCK *** Call trace: dump_backtrace+0xb4/0xf0 show_stack+0x20/0x30 dump_stack_lvl+0x60/0x84 dump_stack+0x18/0x24 print_circular_bug+0x1cc/0x234 check_noncircular+0x78/0xac __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 consol ---truncated--- |
| CVE-2023-52515 | In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: Do not call scsi_done() from srp_abort() After scmd_eh_abort_handler() has called the SCSI LLD eh_abort_handler callback, it performs one of the following actions: * Call scsi_queue_insert(). * Call scsi_finish_command(). * Call scsi_eh_scmd_add(). Hence, SCSI abort handlers must not call scsi_done(). Otherwise all the above actions would trigger a use-after-free. Hence remove the scsi_done() call from srp_abort(). Keep the srp_free_req() call before returning SUCCESS because we may not see the command again if SUCCESS is returned. |
| CVE-2023-52513 | In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix connection failure handling In case immediate MPA request processing fails, the newly created endpoint unlinks the listening endpoint and is ready to be dropped. This special case was not handled correctly by the code handling the later TCP socket close, causing a NULL dereference crash in siw_cm_work_handler() when dereferencing a NULL listener. We now also cancel the useless MPA timeout, if immediate MPA request processing fails. This patch furthermore simplifies MPA processing in general: Scheduling a useless TCP socket read in sk_data_ready() upcall is now surpressed, if the socket is already moved out of TCP_ESTABLISHED state. |
| CVE-2023-52512 | In the Linux kernel, the following vulnerability has been resolved: pinctrl: nuvoton: wpcm450: fix out of bounds write Write into 'pctrl->gpio_bank' happens before the check for GPIO index validity, so out of bounds write may happen. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2023-52511 | In the Linux kernel, the following vulnerability has been resolved: spi: sun6i: reduce DMA RX transfer width to single byte Through empirical testing it has been determined that sometimes RX SPI transfers with DMA enabled return corrupted data. This is down to single or even multiple bytes lost during DMA transfer from SPI peripheral to memory. It seems the RX FIFO within the SPI peripheral can become confused when performing bus read accesses wider than a single byte to it during an active SPI transfer. This patch reduces the width of individual DMA read accesses to the RX FIFO to a single byte to mitigate that issue. |
| CVE-2023-52510 | In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: Fix a potential UAF in ca8210_probe If of_clk_add_provider() fails in ca8210_register_ext_clock(), it calls clk_unregister() to release priv->clk and returns an error. However, the caller ca8210_probe() then calls ca8210_remove(), where priv->clk is freed again in ca8210_unregister_ext_clock(). In this case, a use-after-free may happen in the second time we call clk_unregister(). Fix this by removing the first clk_unregister(). Also, priv->clk could be an error code on failure of clk_register_fixed_rate(). Use IS_ERR_OR_NULL to catch this case in ca8210_unregister_ext_clock(). |
| CVE-2023-52509 | In the Linux kernel, the following vulnerability has been resolved: ravb: Fix use-after-free issue in ravb_tx_timeout_work() The ravb_stop() should call cancel_work_sync(). Otherwise, ravb_tx_timeout_work() is possible to use the freed priv after ravb_remove() was called like below: CPU0 CPU1 ravb_tx_timeout() ravb_remove() unregister_netdev() free_netdev(ndev) // free priv ravb_tx_timeout_work() // use priv unregister_netdev() will call .ndo_stop() so that ravb_stop() is called. And, after phy_stop() is called, netif_carrier_off() is also called. So that .ndo_tx_timeout() will not be called after phy_stop(). |
| CVE-2023-52508 | In the Linux kernel, the following vulnerability has been resolved: nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid() The nvme_fc_fcp_op structure describing an AEN operation is initialized with a null request structure pointer. An FC LLDD may make a call to nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation. Add validation of the request structure pointer before dereference. |
| CVE-2023-52507 | In the Linux kernel, the following vulnerability has been resolved: nfc: nci: assert requested protocol is valid The protocol is used in a bit mask to determine if the protocol is supported. Assert the provided protocol is less than the maximum defined so it doesn't potentially perform a shift-out-of-bounds and provide a clearer error for undefined protocols vs unsupported ones. |
| CVE-2023-52506 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: Set all reserved memblocks on Node#0 at initialization After commit 61167ad5fecdea ("mm: pass nid to reserve_bootmem_region()") we get a panic if DEFERRED_STRUCT_PAGE_INIT is enabled: [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000002b82, era == 90000000040e3f28, ra == 90000000040e3f18 [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0+ #733 [ 0.000000] pc 90000000040e3f28 ra 90000000040e3f18 tp 90000000046f4000 sp 90000000046f7c90 [ 0.000000] a0 0000000000000001 a1 0000000000200000 a2 0000000000000040 a3 90000000046f7ca0 [ 0.000000] a4 90000000046f7ca4 a5 0000000000000000 a6 90000000046f7c38 a7 0000000000000000 [ 0.000000] t0 0000000000000002 t1 9000000004b00ac8 t2 90000000040e3f18 t3 90000000040f0800 [ 0.000000] t4 00000000000f0000 t5 80000000ffffe07e t6 0000000000000003 t7 900000047fff5e20 [ 0.000000] t8 aaaaaaaaaaaaaaab u0 0000000000000018 s9 0000000000000000 s0 fffffefffe000000 [ 0.000000] s1 0000000000000000 s2 0000000000000080 s3 0000000000000040 s4 0000000000000000 [ 0.000000] s5 0000000000000000 s6 fffffefffe000000 s7 900000000470b740 s8 9000000004ad4000 [ 0.000000] ra: 90000000040e3f18 reserve_bootmem_region+0xec/0x21c [ 0.000000] ERA: 90000000040e3f28 reserve_bootmem_region+0xfc/0x21c [ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE) [ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 0.000000] ECFG: 00070800 (LIE=11 VS=7) [ 0.000000] ESTAT: 00010800 [PIL] (IS=11 ECode=1 EsubCode=0) [ 0.000000] BADV: 0000000000002b82 [ 0.000000] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 0000000000000000 9000000002eb5430 0000003a00000020 90000000045ccd00 [ 0.000000] 900000000470e000 90000000002c1918 0000000000000000 9000000004110780 [ 0.000000] 00000000fe6c0000 0000000480000000 9000000004b4e368 9000000004110748 [ 0.000000] 0000000000000000 900000000421ca84 9000000004620000 9000000004564970 [ 0.000000] 90000000046f7d78 9000000002cc9f70 90000000002c1918 900000000470e000 [ 0.000000] 9000000004564970 90000000040bc0e0 90000000046f7d78 0000000000000000 [ 0.000000] 0000000000004000 90000000045ccd00 0000000000000000 90000000002c1918 [ 0.000000] 90000000002c1900 900000000470b700 9000000004b4df78 9000000004620000 [ 0.000000] 90000000046200a8 90000000046200a8 0000000000000000 9000000004218b2c [ 0.000000] 9000000004270008 0000000000000001 0000000000000000 90000000045ccd00 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<90000000040e3f28>] reserve_bootmem_region+0xfc/0x21c [ 0.000000] [<900000000421ca84>] memblock_free_all+0x114/0x350 [ 0.000000] [<9000000004218b2c>] mm_core_init+0x138/0x3cc [ 0.000000] [<9000000004200e38>] start_kernel+0x488/0x7a4 [ 0.000000] [<90000000040df0d8>] kernel_entry+0xd8/0xdc [ 0.000000] [ 0.000000] Code: 02eb21ad 00410f4c 380c31ac <262b818d> 6800b70d 02c1c196 0015001c 57fe4bb1 260002cd The reason is early memblock_reserve() in memblock_init() set node id to MAX_NUMNODES, making NODE_DATA(nid) a NULL dereference in the call chain reserve_bootmem_region() -> init_reserved_page(). After memblock_init(), those late calls of memblock_reserve() operate on subregions of memblock .memory regions. As a result, these reserved regions will be set to the correct node at the first iteration of memmap_init_reserved_pages(). So set all reserved memblocks on Node#0 at initialization can avoid this panic. |
| CVE-2023-52505 | In the Linux kernel, the following vulnerability has been resolved: phy: lynx-28g: serialize concurrent phy_set_mode_ext() calls to shared registers The protocol converter configuration registers PCC8, PCCC, PCCD (implemented by the driver), as well as others, control protocol converters from multiple lanes (each represented as a different struct phy). So, if there are simultaneous calls to phy_set_mode_ext() to lanes sharing the same PCC register (either for the "old" or for the "new" protocol), corruption of the values programmed to hardware is possible, because lynx_28g_rmw() has no locking. Add a spinlock in the struct lynx_28g_priv shared by all lanes, and take the global spinlock from the phy_ops :: set_mode() implementation. There are no other callers which modify PCC registers. |
| CVE-2023-52504 | In the Linux kernel, the following vulnerability has been resolved: x86/alternatives: Disable KASAN in apply_alternatives() Fei has reported that KASAN triggers during apply_alternatives() on a 5-level paging machine: BUG: KASAN: out-of-bounds in rcu_is_watching() Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0 ... __asan_load4() rcu_is_watching() trace_hardirqs_on() text_poke_early() apply_alternatives() ... On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57) gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on __VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled(). KASAN gets confused when apply_alternatives() patches the KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue. Fix it for real by disabling KASAN while the kernel is patching alternatives. [ mingo: updated the changelog ] |
| CVE-2023-52503 | In the Linux kernel, the following vulnerability has been resolved: tee: amdtee: fix use-after-free vulnerability in amdtee_close_session There is a potential race condition in amdtee_close_session that may cause use-after-free in amdtee_open_session. For instance, if a session has refcount == 1, and one thread tries to free this session via: kref_put(&sess->refcount, destroy_session); the reference count will get decremented, and the next step would be to call destroy_session(). However, if in another thread, amdtee_open_session() is called before destroy_session() has completed execution, alloc_session() may return 'sess' that will be freed up later in destroy_session() leading to use-after-free in amdtee_open_session. To fix this issue, treat decrement of sess->refcount and removal of 'sess' from session list in destroy_session() as a critical section, so that it is executed atomically. |
| CVE-2023-52502 | In the Linux kernel, the following vulnerability has been resolved: net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn() Sili Luo reported a race in nfc_llcp_sock_get(), leading to UAF. Getting a reference on the socket found in a lookup while holding a lock should happen before releasing the lock. nfc_llcp_sock_get_sn() has a similar problem. Finally nfc_llcp_recv_snl() needs to make sure the socket found by nfc_llcp_sock_from_sn() does not disappear. |
| CVE-2023-52501 | In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not attempt to read past "commit" When iterating over the ring buffer while the ring buffer is active, the writer can corrupt the reader. There's barriers to help detect this and handle it, but that code missed the case where the last event was at the very end of the page and has only 4 bytes left. The checks to detect the corruption by the writer to reads needs to see the length of the event. If the length in the first 4 bytes is zero then the length is stored in the second 4 bytes. But if the writer is in the process of updating that code, there's a small window where the length in the first 4 bytes could be zero even though the length is only 4 bytes. That will cause rb_event_length() to read the next 4 bytes which could happen to be off the allocated page. To protect against this, fail immediately if the next event pointer is less than 8 bytes from the end of the commit (last byte of data), as all events must be a minimum of 8 bytes anyway. |
| CVE-2023-52500 | In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed when we receive the response. |
| CVE-2023-52499 | In the Linux kernel, the following vulnerability has been resolved: powerpc/47x: Fix 47x syscall return crash Eddie reported that newer kernels were crashing during boot on his 476 FSP2 system: kernel tried to execute user page (b7ee2000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xb7ee2000 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K FSP-2 Modules linked in: CPU: 0 PID: 61 Comm: mount Not tainted 6.1.55-d23900f.ppcnf-fsp2 #1 Hardware name: ibm,fsp2 476fpe 0x7ff520c0 FSP-2 NIP: b7ee2000 LR: 8c008000 CTR: 00000000 REGS: bffebd83 TRAP: 0400 Not tainted (6.1.55-d23900f.ppcnf-fs p2) MSR: 00000030 <IR,DR> CR: 00001000 XER: 20000000 GPR00: c00110ac bffebe63 bffebe7e bffebe88 8c008000 00001000 00000d12 b7ee2000 GPR08: 00000033 00000000 00000000 c139df10 48224824 1016c314 10160000 00000000 GPR16: 10160000 10160000 00000008 00000000 10160000 00000000 10160000 1017f5b0 GPR24: 1017fa50 1017f4f0 1017fa50 1017f740 1017f630 00000000 00000000 1017f4f0 NIP [b7ee2000] 0xb7ee2000 LR [8c008000] 0x8c008000 Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- The problem is in ret_from_syscall where the check for icache_44x_need_flush is done. When the flush is needed the code jumps out-of-line to do the flush, and then intends to jump back to continue the syscall return. However the branch back to label 1b doesn't return to the correct location, instead branching back just prior to the return to userspace, causing bogus register values to be used by the rfi. The breakage was introduced by commit 6f76a01173cc ("powerpc/syscall: implement system call entry/exit logic in C for PPC32") which inadvertently removed the "1" label and reused it elsewhere. Fix it by adding named local labels in the correct locations. Note that the return label needs to be outside the ifdef so that CONFIG_PPC_47x=n compiles. |
| CVE-2023-52498 | In the Linux kernel, the following vulnerability has been resolved: PM: sleep: Fix possible deadlocks in core system-wide PM code It is reported that in low-memory situations the system-wide resume core code deadlocks, because async_schedule_dev() executes its argument function synchronously if it cannot allocate memory (and not only in that case) and that function attempts to acquire a mutex that is already held. Executing the argument function synchronously from within dpm_async_fn() may also be problematic for ordering reasons (it may cause a consumer device's resume callback to be invoked before a requisite supplier device's one, for example). Address this by changing the code in question to use async_schedule_dev_nocall() for scheduling the asynchronous execution of device suspend and resume functions and to directly run them synchronously if async_schedule_dev_nocall() returns false. |
| CVE-2023-52497 | In the Linux kernel, the following vulnerability has been resolved: erofs: fix lz4 inplace decompression Currently EROFS can map another compressed buffer for inplace decompression, that was used to handle the cases that some pages of compressed data are actually not in-place I/O. However, like most simple LZ77 algorithms, LZ4 expects the compressed data is arranged at the end of the decompressed buffer and it explicitly uses memmove() to handle overlapping: __________________________________________________________ |_ direction of decompression --> ____ |_ compressed data _| Although EROFS arranges compressed data like this, it typically maps two individual virtual buffers so the relative order is uncertain. Previously, it was hardly observed since LZ4 only uses memmove() for short overlapped literals and x86/arm64 memmove implementations seem to completely cover it up and they don't have this issue. Juhyung reported that EROFS data corruption can be found on a new Intel x86 processor. After some analysis, it seems that recent x86 processors with the new FSRM feature expose this issue with "rep movsb". Let's strictly use the decompressed buffer for lz4 inplace decompression for now. Later, as an useful improvement, we could try to tie up these two buffers together in the correct order. |
| CVE-2023-52495 | In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pmic_glink_altmode: fix port sanity check The PMIC GLINK altmode driver currently supports at most two ports. Fix the incomplete port sanity check on notifications to avoid accessing and corrupting memory beyond the port array if we ever get a notification for an unsupported port. |
| CVE-2023-52494 | In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Add alignment check for event ring read pointer Though we do check the event ring read pointer by "is_valid_ring_ptr" to make sure it is in the buffer range, but there is another risk the pointer may be not aligned. Since we are expecting event ring elements are 128 bits(struct mhi_ring_element) aligned, an unaligned read pointer could lead to multiple issues like DoS or ring buffer memory corruption. So add a alignment check for event ring read pointer. |
| CVE-2023-52493 | In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Drop chan lock before queuing buffers Ensure read and write locks for the channel are not taken in succession by dropping the read lock from parse_xfer_event() such that a callback given to client can potentially queue buffers and acquire the write lock in that process. Any queueing of buffers should be done without channel read lock acquired as it can result in multiple locks and a soft lockup. [mani: added fixes tag and cc'ed stable] |
| CVE-2023-52492 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: fix NULL pointer in channel unregistration function __dma_async_device_channel_register() can fail. In case of failure, chan->local is freed (with free_percpu()), and chan->local is nullified. When dma_async_device_unregister() is called (because of managed API or intentionally by DMA controller driver), channels are unconditionally unregistered, leading to this NULL pointer: [ 1.318693] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 [...] [ 1.484499] Call trace: [ 1.486930] device_del+0x40/0x394 [ 1.490314] device_unregister+0x20/0x7c [ 1.494220] __dma_async_device_channel_unregister+0x68/0xc0 Look at dma_async_device_register() function error path, channel device unregistration is done only if chan->local is not NULL. Then add the same condition at the beginning of __dma_async_device_channel_unregister() function, to avoid NULL pointer issue whatever the API used to reach this function. |
| CVE-2023-52491 | In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: Fix use after free bug due to error path handling in mtk_jpeg_dec_device_run In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with mtk_jpeg_job_timeout_work. In mtk_jpeg_dec_device_run, if error happens in mtk_jpeg_set_dec_dst, it will finally start the worker while mark the job as finished by invoking v4l2_m2m_job_finish. There are two methods to trigger the bug. If we remove the module, it which will call mtk_jpeg_remove to make cleanup. The possible sequence is as follows, which will cause a use-after-free bug. CPU0 CPU1 mtk_jpeg_dec_... | start worker | |mtk_jpeg_job_timeout_work mtk_jpeg_remove | v4l2_m2m_release | kfree(m2m_dev); | | | v4l2_m2m_get_curr_priv | m2m_dev->curr_ctx //use If we close the file descriptor, which will call mtk_jpeg_release, it will have a similar sequence. Fix this bug by starting timeout worker only if started jpegdec worker successfully. Then v4l2_m2m_job_finish will only be called in either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run. |
| CVE-2023-52490 | In the Linux kernel, the following vulnerability has been resolved: mm: migrate: fix getting incorrect page mapping during page migration When running stress-ng testing, we found below kernel crash after a few hours: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : dentry_name+0xd8/0x224 lr : pointer+0x22c/0x370 sp : ffff800025f134c0 ...... Call trace: dentry_name+0xd8/0x224 pointer+0x22c/0x370 vsnprintf+0x1ec/0x730 vscnprintf+0x2c/0x60 vprintk_store+0x70/0x234 vprintk_emit+0xe0/0x24c vprintk_default+0x3c/0x44 vprintk_func+0x84/0x2d0 printk+0x64/0x88 __dump_page+0x52c/0x530 dump_page+0x14/0x20 set_migratetype_isolate+0x110/0x224 start_isolate_page_range+0xc4/0x20c offline_pages+0x124/0x474 memory_block_offline+0x44/0xf4 memory_subsys_offline+0x3c/0x70 device_offline+0xf0/0x120 ...... After analyzing the vmcore, I found this issue is caused by page migration. The scenario is that, one thread is doing page migration, and we will use the target page's ->mapping field to save 'anon_vma' pointer between page unmap and page move, and now the target page is locked and refcount is 1. Currently, there is another stress-ng thread performing memory hotplug, attempting to offline the target page that is being migrated. It discovers that the refcount of this target page is 1, preventing the offline operation, thus proceeding to dump the page. However, page_mapping() of the target page may return an incorrect file mapping to crash the system in dump_mapping(), since the target page->mapping only saves 'anon_vma' pointer without setting PAGE_MAPPING_ANON flag. There are seveval ways to fix this issue: (1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving 'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target page has not built mappings yet. (2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing the system, however, there are still some PFN walkers that call page_mapping() without holding the page lock, such as compaction. (3) Using target page->private field to save the 'anon_vma' pointer and 2 bits page state, just as page->mapping records an anonymous page, which can remove the page_mapping() impact for PFN walkers and also seems a simple way. So I choose option 3 to fix this issue, and this can also fix other potential issues for PFN walkers, such as compaction. |
| CVE-2023-52489 | In the Linux kernel, the following vulnerability has been resolved: mm/sparsemem: fix race in accessing memory_section->usage The below race is observed on a PFN which falls into the device memory region with the system memory configuration where PFN's are such that [ZONE_NORMAL ZONE_DEVICE ZONE_NORMAL]. Since normal zone start and end pfn contains the device memory PFN's as well, the compaction triggered will try on the device memory PFN's too though they end up in NOP(because pfn_to_online_page() returns NULL for ZONE_DEVICE memory sections). When from other core, the section mappings are being removed for the ZONE_DEVICE region, that the PFN in question belongs to, on which compaction is currently being operated is resulting into the kernel crash with CONFIG_SPASEMEM_VMEMAP enabled. The crash logs can be seen at [1]. compact_zone() memunmap_pages ------------- --------------- __pageblock_pfn_to_page ...... (a)pfn_valid(): valid_section()//return true (b)__remove_pages()-> sparse_remove_section()-> section_deactivate(): [Free the array ms->usage and set ms->usage = NULL] pfn_section_valid() [Access ms->usage which is NULL] NOTE: From the above it can be said that the race is reduced to between the pfn_valid()/pfn_section_valid() and the section deactivate with SPASEMEM_VMEMAP enabled. The commit b943f045a9af("mm/sparse: fix kernel crash with pfn_section_valid check") tried to address the same problem by clearing the SECTION_HAS_MEM_MAP with the expectation of valid_section() returns false thus ms->usage is not accessed. Fix this issue by the below steps: a) Clear SECTION_HAS_MEM_MAP before freeing the ->usage. b) RCU protected read side critical section will either return NULL when SECTION_HAS_MEM_MAP is cleared or can successfully access ->usage. c) Free the ->usage with kfree_rcu() and set ms->usage = NULL. No attempt will be made to access ->usage after this as the SECTION_HAS_MEM_MAP is cleared thus valid_section() return false. Thanks to David/Pavan for their inputs on this patch. [1] https://lore.kernel.org/linux-mm/[email protected]/ On Snapdragon SoC, with the mentioned memory configuration of PFN's as [ZONE_NORMAL ZONE_DEVICE ZONE_NORMAL], we are able to see bunch of issues daily while testing on a device farm. For this particular issue below is the log. Though the below log is not directly pointing to the pfn_section_valid(){ ms->usage;}, when we loaded this dump on T32 lauterbach tool, it is pointing. [ 540.578056] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 540.578068] Mem abort info: [ 540.578070] ESR = 0x0000000096000005 [ 540.578073] EC = 0x25: DABT (current EL), IL = 32 bits [ 540.578077] SET = 0, FnV = 0 [ 540.578080] EA = 0, S1PTW = 0 [ 540.578082] FSC = 0x05: level 1 translation fault [ 540.578085] Data abort info: [ 540.578086] ISV = 0, ISS = 0x00000005 [ 540.578088] CM = 0, WnR = 0 [ 540.579431] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBSBTYPE=--) [ 540.579436] pc : __pageblock_pfn_to_page+0x6c/0x14c [ 540.579454] lr : compact_zone+0x994/0x1058 [ 540.579460] sp : ffffffc03579b510 [ 540.579463] x29: ffffffc03579b510 x28: 0000000000235800 x27:000000000000000c [ 540.579470] x26: 0000000000235c00 x25: 0000000000000068 x24:ffffffc03579b640 [ 540.579477] x23: 0000000000000001 x22: ffffffc03579b660 x21:0000000000000000 [ 540.579483] x20: 0000000000235bff x19: ffffffdebf7e3940 x18:ffffffdebf66d140 [ 540.579489] x17: 00000000739ba063 x16: 00000000739ba063 x15:00000000009f4bff [ 540.579495] x14: 0000008000000000 x13: 0000000000000000 x12:0000000000000001 [ 540.579501] x11: 0000000000000000 x10: 0000000000000000 x9 :ffffff897d2cd440 [ 540.579507] x8 : 0000000000000000 x7 : 0000000000000000 x6 :ffffffc03579b5b4 [ 540.579512] x5 : 0000000000027f25 x4 : ffffffc03579b5b8 x3 :0000000000000 ---truncated--- |
| CVE-2023-52488 | In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: convert from _raw_ to _noinc_ regmap functions for FIFO The SC16IS7XX IC supports a burst mode to access the FIFOs where the initial register address is sent ($00), followed by all the FIFO data without having to resend the register address each time. In this mode, the IC doesn't increment the register address for each R/W byte. The regmap_raw_read() and regmap_raw_write() are functions which can perform IO over multiple registers. They are currently used to read/write from/to the FIFO, and although they operate correctly in this burst mode on the SPI bus, they would corrupt the regmap cache if it was not disabled manually. The reason is that when the R/W size is more than 1 byte, these functions assume that the register address is incremented and handle the cache accordingly. Convert FIFO R/W functions to use the regmap _noinc_ versions in order to remove the manual cache control which was a workaround when using the _raw_ versions. FIFO registers are properly declared as volatile so cache will not be used/updated for FIFO accesses. |
| CVE-2023-52487 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix peer flow lists handling The cited change refactored mlx5e_tc_del_fdb_peer_flow() to only clear DUP flag when list of peer flows has become empty. However, if any concurrent user holds a reference to a peer flow (for example, the neighbor update workqueue task is updating peer flow's parent encap entry concurrently), then the flow will not be removed from the peer list and, consecutively, DUP flag will remain set. Since mlx5e_tc_del_fdb_peers_flow() calls mlx5e_tc_del_fdb_peer_flow() for every possible peer index the algorithm will try to remove the flow from eswitch instances that it has never peered with causing either NULL pointer dereference when trying to remove the flow peer list head of peer_index that was never initialized or a warning if the list debug config is enabled[0]. Fix the issue by always removing the peer flow from the list even when not releasing the last reference to it. [0]: [ 3102.985806] ------------[ cut here ]------------ [ 3102.986223] list_del corruption, ffff888139110698->next is NULL [ 3102.986757] WARNING: CPU: 2 PID: 22109 at lib/list_debug.c:53 __list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.987561] Modules linked in: act_ct nf_flow_table bonding act_tunnel_key act_mirred act_skbedit vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcg ss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core [last unloaded: bonding] [ 3102.991113] CPU: 2 PID: 22109 Comm: revalidator28 Not tainted 6.6.0-rc6+ #3 [ 3102.991695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 3102.992605] RIP: 0010:__list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.993122] Code: 39 c2 74 56 48 8b 32 48 39 fe 75 62 48 8b 51 08 48 39 f2 75 73 b8 01 00 00 00 c3 48 89 fe 48 c7 c7 48 fd 0a 82 e8 41 0b ad ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 fd 0a 82 e8 2d 0b ad ff 0f 0b [ 3102.994615] RSP: 0018:ffff8881383e7710 EFLAGS: 00010286 [ 3102.995078] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 3102.995670] RDX: 0000000000000001 RSI: ffff88885f89b640 RDI: ffff88885f89b640 [ 3102.997188] DEL flow 00000000be367878 on port 0 [ 3102.998594] RBP: dead000000000122 R08: 0000000000000000 R09: c0000000ffffdfff [ 3102.999604] R10: 0000000000000008 R11: ffff8881383e7598 R12: dead000000000100 [ 3103.000198] R13: 0000000000000002 R14: ffff888139110000 R15: ffff888101901240 [ 3103.000790] FS: 00007f424cde4700(0000) GS:ffff88885f880000(0000) knlGS:0000000000000000 [ 3103.001486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3103.001986] CR2: 00007fd42e8dcb70 CR3: 000000011e68a003 CR4: 0000000000370ea0 [ 3103.002596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3103.003190] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3103.003787] Call Trace: [ 3103.004055] <TASK> [ 3103.004297] ? __warn+0x7d/0x130 [ 3103.004623] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.005094] ? report_bug+0xf1/0x1c0 [ 3103.005439] ? console_unlock+0x4a/0xd0 [ 3103.005806] ? handle_bug+0x3f/0x70 [ 3103.006149] ? exc_invalid_op+0x13/0x60 [ 3103.006531] ? asm_exc_invalid_op+0x16/0x20 [ 3103.007430] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.007910] mlx5e_tc_del_fdb_peers_flow+0xcf/0x240 [mlx5_core] [ 3103.008463] mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] [ 3103.008944] mlx5e_flow_put+0x26/0x50 [mlx5_core] [ 3103.009401] mlx5e_delete_flower+0x25f/0x380 [mlx5_core] [ 3103.009901] tc_setup_cb_destroy+0xab/0x180 [ 3103.010292] fl_hw_destroy_filter+0x99/0xc0 [cls_flower] [ 3103.010779] __fl_delete+0x2d4/0x2f0 [cls_flower] [ 3103.0 ---truncated--- |
| CVE-2023-52486 | In the Linux kernel, the following vulnerability has been resolved: drm: Don't unref the same fb many times by mistake due to deadlock handling If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl() we proceed to unref the fb and then retry the whole thing from the top. But we forget to reset the fb pointer back to NULL, and so if we then get another error during the retry, before the fb lookup, we proceed the unref the same fb again without having gotten another reference. The end result is that the fb will (eventually) end up being freed while it's still in use. Reset fb to NULL once we've unreffed it to avoid doing it again until we've done another fb lookup. This turned out to be pretty easy to hit on a DG2 when doing async flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I saw that drm_closefb() simply got stuck in a busy loop while walking the framebuffer list. Fortunately I was able to convince it to oops instead, and from there it was easier to track down the culprit. |
| CVE-2023-52485 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wake DMCUB before sending a command [Why] We can hang in place trying to send commands when the DMCUB isn't powered on. [How] For functions that execute within a DC context or DC lock we can wrap the direct calls to dm_execute_dmub_cmd/list with code that exits idle power optimizations and reallows once we're done with the command submission on success. For DM direct submissions the DM will need to manage the enter/exit sequencing manually. We cannot invoke a DMCUB command directly within the DM execution helper or we can deadlock. |
| CVE-2023-52484 | In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Fix soft lockup triggered by arm_smmu_mm_invalidate_range When running an SVA case, the following soft lockup is triggered: -------------------------------------------------------------------- watchdog: BUG: soft lockup - CPU#244 stuck for 26s! pstate: 83400009 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : arm_smmu_cmdq_issue_cmdlist+0x178/0xa50 lr : arm_smmu_cmdq_issue_cmdlist+0x150/0xa50 sp : ffff8000d83ef290 x29: ffff8000d83ef290 x28: 000000003b9aca00 x27: 0000000000000000 x26: ffff8000d83ef3c0 x25: da86c0812194a0e8 x24: 0000000000000000 x23: 0000000000000040 x22: ffff8000d83ef340 x21: ffff0000c63980c0 x20: 0000000000000001 x19: ffff0000c6398080 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffff3000b4a3bbb0 x14: ffff3000b4a30888 x13: ffff3000b4a3cf60 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc08120e4d6bc x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000048cfa x5 : 0000000000000000 x4 : 0000000000000001 x3 : 000000000000000a x2 : 0000000080000000 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: arm_smmu_cmdq_issue_cmdlist+0x178/0xa50 __arm_smmu_tlb_inv_range+0x118/0x254 arm_smmu_tlb_inv_range_asid+0x6c/0x130 arm_smmu_mm_invalidate_range+0xa0/0xa4 __mmu_notifier_invalidate_range_end+0x88/0x120 unmap_vmas+0x194/0x1e0 unmap_region+0xb4/0x144 do_mas_align_munmap+0x290/0x490 do_mas_munmap+0xbc/0x124 __vm_munmap+0xa8/0x19c __arm64_sys_munmap+0x28/0x50 invoke_syscall+0x78/0x11c el0_svc_common.constprop.0+0x58/0x1c0 do_el0_svc+0x34/0x60 el0_svc+0x2c/0xd4 el0t_64_sync_handler+0x114/0x140 el0t_64_sync+0x1a4/0x1a8 -------------------------------------------------------------------- Note that since 6.6-rc1 the arm_smmu_mm_invalidate_range above is renamed to "arm_smmu_mm_arch_invalidate_secondary_tlbs", yet the problem remains. The commit 06ff87bae8d3 ("arm64: mm: remove unused functions and variable protoypes") fixed a similar lockup on the CPU MMU side. Yet, it can occur to SMMU too, since arm_smmu_mm_arch_invalidate_secondary_tlbs() is called typically next to MMU tlb flush function, e.g. tlb_flush_mmu_tlbonly { tlb_flush { __flush_tlb_range { // check MAX_TLBI_OPS } } mmu_notifier_arch_invalidate_secondary_tlbs { arm_smmu_mm_arch_invalidate_secondary_tlbs { // does not check MAX_TLBI_OPS } } } Clone a CMDQ_MAX_TLBI_OPS from the MAX_TLBI_OPS in tlbflush.h, since in an SVA case SMMU uses the CPU page table, so it makes sense to align with the tlbflush code. Then, replace per-page TLBI commands with a single per-asid TLBI command, if the request size hits this threshold. |
| CVE-2023-52483 | In the Linux kernel, the following vulnerability has been resolved: mctp: perform route lookups under a RCU read-side lock Our current route lookups (mctp_route_lookup and mctp_route_lookup_null) traverse the net's route list without the RCU read lock held. This means the route lookup is subject to preemption, resulting in an potential grace period expiry, and so an eventual kfree() while we still have the route pointer. Add the proper read-side critical section locks around the route lookups, preventing premption and a possible parallel kfree. The remaining net->mctp.routes accesses are already under a rcu_read_lock, or protected by the RTNL for updates. Based on an analysis from Sili Luo <[email protected]>, where introducing a delay in the route lookup could cause a UAF on simultaneous sendmsg() and route deletion. |
| CVE-2023-52482 | In the Linux kernel, the following vulnerability has been resolved: x86/srso: Add SRSO mitigation for Hygon processors Add mitigation for the speculative return stack overflow vulnerability which exists on Hygon processors too. |
| CVE-2023-52481 | In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Add Cortex-A520 speculative unprivileged load workaround Implement the workaround for ARM Cortex-A520 erratum 2966298. On an affected Cortex-A520 core, a speculatively executed unprivileged load might leak data from a privileged load via a cache side channel. The issue only exists for loads within a translation regime with the same translation (e.g. same ASID and VMID). Therefore, the issue only affects the return to EL0. The workaround is to execute a TLBI before returning to EL0 after all loads of privileged data. A non-shareable TLBI to any address is sufficient. The workaround isn't necessary if page table isolation (KPTI) is enabled, but for simplicity it will be. Page table isolation should normally be disabled for Cortex-A520 as it supports the CSV3 feature and the E0PD feature (used when KASLR is enabled). |
| CVE-2023-52480 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix race condition between session lookup and expire Thread A + Thread B ksmbd_session_lookup | smb2_sess_setup sess = xa_load | | | xa_erase(&conn->sessions, sess->id); | | ksmbd_session_destroy(sess) --> kfree(sess) | // UAF! | sess->last_active = jiffies | + This patch add rwsem to fix race condition between ksmbd_session_lookup and ksmbd_expire_session. |
| CVE-2023-52479 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix uaf in smb20_oplock_break_ack drop reference after use opinfo. |
| CVE-2023-52478 | In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect hidpp_connect_event() has *four* time-of-check vs time-of-use (TOCTOU) races when it races with itself. hidpp_connect_event() primarily runs from a workqueue but it also runs on probe() and if a "device-connected" packet is received by the hw when the thread running hidpp_connect_event() from probe() is waiting on the hw, then a second thread running hidpp_connect_event() will be started from the workqueue. This opens the following races (note the below code is simplified): 1. Retrieving + printing the protocol (harmless race): if (!hidpp->protocol_major) { hidpp_root_get_protocol_version() hidpp->protocol_major = response.rap.params[0]; } We can actually see this race hit in the dmesg in the abrt output attached to rhbz#2227968: [ 3064.624215] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected. [ 3064.658184] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected. Testing with extra logging added has shown that after this the 2 threads take turn grabbing the hw access mutex (send_mutex) so they ping-pong through all the other TOCTOU cases managing to hit all of them: 2. Updating the name to the HIDPP name (harmless race): if (hidpp->name == hdev->name) { ... hidpp->name = new_name; } 3. Initializing the power_supply class for the battery (problematic!): hidpp_initialize_battery() { if (hidpp->battery.ps) return 0; probe_battery(); /* Blocks, threads take turns executing this */ hidpp->battery.desc.properties = devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL); hidpp->battery.ps = devm_power_supply_register(&hidpp->hid_dev->dev, &hidpp->battery.desc, cfg); } 4. Creating delayed input_device (potentially problematic): if (hidpp->delayed_input) return; hidpp->delayed_input = hidpp_allocate_input(hdev); The really big problem here is 3. Hitting the race leads to the following sequence: hidpp->battery.desc.properties = devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL); hidpp->battery.ps = devm_power_supply_register(&hidpp->hid_dev->dev, &hidpp->battery.desc, cfg); ... hidpp->battery.desc.properties = devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL); hidpp->battery.ps = devm_power_supply_register(&hidpp->hid_dev->dev, &hidpp->battery.desc, cfg); So now we have registered 2 power supplies for the same battery, which looks a bit weird from userspace's pov but this is not even the really big problem. Notice how: 1. This is all devm-maganaged 2. The hidpp->battery.desc struct is shared between the 2 power supplies 3. hidpp->battery.desc.properties points to the result from the second devm_kmemdup() This causes a use after free scenario on USB disconnect of the receiver: 1. The last registered power supply class device gets unregistered 2. The memory from the last devm_kmemdup() call gets freed, hidpp->battery.desc.properties now points to freed memory 3. The first registered power supply class device gets unregistered, this involves sending a remove uevent to userspace which invokes power_supply_uevent() to fill the uevent data 4. power_supply_uevent() uses hidpp->battery.desc.properties which now points to freed memory leading to backtraces like this one: Sep 22 20:01:35 eric kernel: BUG: unable to handle page fault for address: ffffb2140e017f08 ... Sep 22 20:01:35 eric kernel: Workqueue: usb_hub_wq hub_event Sep 22 20:01:35 eric kernel: RIP: 0010:power_supply_uevent+0xee/0x1d0 ... Sep 22 20:01:35 eric kernel: ? asm_exc_page_fault+0x26/0x30 Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0xee/0x1d0 Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0x10d/0x1d0 Sep 22 20:01:35 eric kernel: dev_uevent+0x10f/0x2d0 Sep 22 20:01:35 eric kernel: kobject_uevent_env+0x291/0x680 Sep 22 20:01:35 eric kernel: ---truncated--- |
| CVE-2023-52477 | In the Linux kernel, the following vulnerability has been resolved: usb: hub: Guard against accesses to uninitialized BOS descriptors Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h access fields inside udev->bos without checking if it was allocated and initialized. If usb_get_bos_descriptor() fails for whatever reason, udev->bos will be NULL and those accesses will result in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 <HASH:1f9e 1> Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:hub_port_reset+0x193/0x788 Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9 RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310 RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840 RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0 Call Trace: hub_event+0x73f/0x156e ? hub_activate+0x5b7/0x68f process_one_work+0x1a2/0x487 worker_thread+0x11a/0x288 kthread+0x13a/0x152 ? process_one_work+0x487/0x487 ? kthread_associate_blkcg+0x70/0x70 ret_from_fork+0x1f/0x30 Fall back to a default behavior if the BOS descriptor isn't accessible and skip all the functionalities that depend on it: LPM support checks, Super Speed capabilitiy checks, U1/U2 states setup. |
| CVE-2023-52476 | In the Linux kernel, the following vulnerability has been resolved: perf/x86/lbr: Filter vsyscall addresses We found that a panic can occur when a vsyscall is made while LBR sampling is active. If the vsyscall is interrupted (NMI) for perf sampling, this call sequence can occur (most recent at top): __insn_get_emulate_prefix() insn_get_emulate_prefix() insn_get_prefixes() insn_get_opcode() decode_branch_type() get_branch_type() intel_pmu_lbr_filter() intel_pmu_handle_irq() perf_event_nmi_handler() Within __insn_get_emulate_prefix() at frame 0, a macro is called: peek_nbyte_next(insn_byte_t, insn, i) Within this macro, this dereference occurs: (insn)->next_byte Inspecting registers at this point, the value of the next_byte field is the address of the vsyscall made, for example the location of the vsyscall version of gettimeofday() at 0xffffffffff600000. The access to an address in the vsyscall region will trigger an oops due to an unhandled page fault. To fix the bug, filtering for vsyscalls can be done when determining the branch type. This patch will return a "none" branch if a kernel address if found to lie in the vsyscall region. |
| CVE-2023-52475 | In the Linux kernel, the following vulnerability has been resolved: Input: powermate - fix use-after-free in powermate_config_complete syzbot has found a use-after-free bug [1] in the powermate driver. This happens when the device is disconnected, which leads to a memory free from the powermate_device struct. When an asynchronous control message completes after the kfree and its callback is invoked, the lock does not exist anymore and hence the bug. Use usb_kill_urb() on pm->config to cancel any in-progress requests upon device disconnection. [1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e |
| CVE-2023-52474 | In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests hfi1 user SDMA request processing has two bugs that can cause data corruption for user SDMA requests that have multiple payload iovecs where an iovec other than the tail iovec does not run up to the page boundary for the buffer pointed to by that iovec.a Here are the specific bugs: 1. user_sdma_txadd() does not use struct user_sdma_iovec->iov.iov_len. Rather, user_sdma_txadd() will add up to PAGE_SIZE bytes from iovec to the packet, even if some of those bytes are past iovec->iov.iov_len and are thus not intended to be in the packet. 2. user_sdma_txadd() and user_sdma_send_pkts() fail to advance to the next iovec in user_sdma_request->iovs when the current iovec is not PAGE_SIZE and does not contain enough data to complete the packet. The transmitted packet will contain the wrong data from the iovec pages. This has not been an issue with SDMA packets from hfi1 Verbs or PSM2 because they only produce iovecs that end short of PAGE_SIZE as the tail iovec of an SDMA request. Fixing these bugs exposes other bugs with the SDMA pin cache (struct mmu_rb_handler) that get in way of supporting user SDMA requests with multiple payload iovecs whose buffers do not end at PAGE_SIZE. So this commit fixes those issues as well. Here are the mmu_rb_handler bugs that non-PAGE_SIZE-end multi-iovec payload user SDMA requests can hit: 1. Overlapping memory ranges in mmu_rb_handler will result in duplicate pinnings. 2. When extending an existing mmu_rb_handler entry (struct mmu_rb_node), the mmu_rb code (1) removes the existing entry under a lock, (2) releases that lock, pins the new pages, (3) then reacquires the lock to insert the extended mmu_rb_node. If someone else comes in and inserts an overlapping entry between (2) and (3), insert in (3) will fail. The failure path code in this case unpins _all_ pages in either the original mmu_rb_node or the new mmu_rb_node that was inserted between (2) and (3). 3. In hfi1_mmu_rb_remove_unless_exact(), mmu_rb_node->refcount is incremented outside of mmu_rb_handler->lock. As a result, mmu_rb_node could be evicted by another thread that gets mmu_rb_handler->lock and checks mmu_rb_node->refcount before mmu_rb_node->refcount is incremented. 4. Related to #2 above, SDMA request submission failure path does not check mmu_rb_node->refcount before freeing mmu_rb_node object. If there are other SDMA requests in progress whose iovecs have pointers to the now-freed mmu_rb_node(s), those pointers to the now-freed mmu_rb nodes will be dereferenced when those SDMA requests complete. |
| CVE-2023-52473 | In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix NULL pointer dereference in zone registration error path If device_register() in thermal_zone_device_register_with_trips() returns an error, the tz variable is set to NULL and subsequently dereferenced in kfree(tz->tzp). Commit adc8749b150c ("thermal/drivers/core: Use put_device() if device_register() fails") added the tz = NULL assignment in question to avoid a possible double-free after dropping the reference to the zone device. However, after commit 4649620d9404 ("thermal: core: Make thermal_zone_device_unregister() return after freeing the zone"), that assignment has become redundant, because dropping the reference to the zone device does not cause the zone object to be freed any more. Drop it to address the NULL pointer dereference. |
| CVE-2023-52472 | In the Linux kernel, the following vulnerability has been resolved: crypto: rsa - add a check for allocation failure Static checkers insist that the mpi_alloc() allocation can fail so add a check to prevent a NULL dereference. Small allocations like this can't actually fail in current kernels, but adding a check is very simple and makes the static checkers happy. |
| CVE-2023-52471 | In the Linux kernel, the following vulnerability has been resolved: ice: Fix some null pointer dereference issues in ice_ptp.c devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. |
| CVE-2023-52470 | In the Linux kernel, the following vulnerability has been resolved: drm/radeon: check the alloc_workqueue return value in radeon_crtc_init() check the alloc_workqueue return value in radeon_crtc_init() to avoid null-ptr-deref. |
| CVE-2023-52469 | In the Linux kernel, the following vulnerability has been resolved: drivers/amd/pm: fix a use-after-free in kv_parse_power_table When ps allocated by kzalloc equals to NULL, kv_parse_power_table frees adev->pm.dpm.ps that allocated before. However, after the control flow goes through the following call chains: kv_parse_power_table |-> kv_dpm_init |-> kv_dpm_sw_init |-> kv_dpm_fini The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its first free in kv_parse_power_table and causes a use-after-free bug. |
| CVE-2023-52468 | In the Linux kernel, the following vulnerability has been resolved: class: fix use-after-free in class_register() The lock_class_key is still registered and can be found in lock_keys_hash hlist after subsys_private is freed in error handler path.A task who iterate over the lock_keys_hash later may cause use-after-free.So fix that up and unregister the lock_class_key before kfree(cp). On our platform, a driver fails to kset_register because of creating duplicate filename '/class/xxx'.With Kasan enabled, it prints a invalid-access bug report. KASAN bug report: BUG: KASAN: invalid-access in lockdep_register_key+0x19c/0x1bc Write of size 8 at addr 15ffff808b8c0368 by task modprobe/252 Pointer tag: [15], memory tag: [fe] CPU: 7 PID: 252 Comm: modprobe Tainted: G W 6.6.0-mainline-maybe-dirty #1 Call trace: dump_backtrace+0x1b0/0x1e4 show_stack+0x2c/0x40 dump_stack_lvl+0xac/0xe0 print_report+0x18c/0x4d8 kasan_report+0xe8/0x148 __hwasan_store8_noabort+0x88/0x98 lockdep_register_key+0x19c/0x1bc class_register+0x94/0x1ec init_module+0xbc/0xf48 [rfkill] do_one_initcall+0x17c/0x72c do_init_module+0x19c/0x3f8 ... Memory state around the buggy address: ffffff808b8c0100: 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a ffffff808b8c0200: 8a 8a 8a 8a 8a 8a 8a 8a fe fe fe fe fe fe fe fe >ffffff808b8c0300: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe ^ ffffff808b8c0400: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 As CONFIG_KASAN_GENERIC is not set, Kasan reports invalid-access not use-after-free here.In this case, modprobe is manipulating the corrupted lock_keys_hash hlish where lock_class_key is already freed before. It's worth noting that this only can happen if lockdep is enabled, which is not true for normal system. |
| CVE-2023-52467 | In the Linux kernel, the following vulnerability has been resolved: mfd: syscon: Fix null pointer dereference in of_syscon_register() kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. |
| CVE-2023-52465 | In the Linux kernel, the following vulnerability has been resolved: power: supply: Fix null pointer dereference in smb2_probe devm_kasprintf and devm_kzalloc return a pointer to dynamically allocated memory which can be NULL upon failure. |
| CVE-2023-52464 | In the Linux kernel, the following vulnerability has been resolved: EDAC/thunderx: Fix possible out-of-bounds string access Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ] |
| CVE-2023-52463 | In the Linux kernel, the following vulnerability has been resolved: efivarfs: force RO when remounting if SetVariable is not supported If SetVariable at runtime is not supported by the firmware we never assign a callback for that function. At the same time mount the efivarfs as RO so no one can call that. However, we never check the permission flags when someone remounts the filesystem as RW. As a result this leads to a crash looking like this: $ mount -o remount,rw /sys/firmware/efi/efivars $ efi-updatevar -f PK.auth PK [ 303.279166] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 303.280482] Mem abort info: [ 303.280854] ESR = 0x0000000086000004 [ 303.281338] EC = 0x21: IABT (current EL), IL = 32 bits [ 303.282016] SET = 0, FnV = 0 [ 303.282414] EA = 0, S1PTW = 0 [ 303.282821] FSC = 0x04: level 0 translation fault [ 303.283771] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004258c000 [ 303.284913] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 303.286076] Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP [ 303.286936] Modules linked in: qrtr tpm_tis tpm_tis_core crct10dif_ce arm_smccc_trng rng_core drm fuse ip_tables x_tables ipv6 [ 303.288586] CPU: 1 PID: 755 Comm: efi-updatevar Not tainted 6.3.0-rc1-00108-gc7d0c4695c68 #1 [ 303.289748] Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.04-00627-g88336918701d 04/01/2023 [ 303.291150] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 303.292123] pc : 0x0 [ 303.292443] lr : efivar_set_variable_locked+0x74/0xec [ 303.293156] sp : ffff800008673c10 [ 303.293619] x29: ffff800008673c10 x28: ffff0000037e8000 x27: 0000000000000000 [ 303.294592] x26: 0000000000000800 x25: ffff000002467400 x24: 0000000000000027 [ 303.295572] x23: ffffd49ea9832000 x22: ffff0000020c9800 x21: ffff000002467000 [ 303.296566] x20: 0000000000000001 x19: 00000000000007fc x18: 0000000000000000 [ 303.297531] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaac807ab54 [ 303.298495] x14: ed37489f673633c0 x13: 71c45c606de13f80 x12: 47464259e219acf4 [ 303.299453] x11: ffff000002af7b01 x10: 0000000000000003 x9 : 0000000000000002 [ 303.300431] x8 : 0000000000000010 x7 : ffffd49ea8973230 x6 : 0000000000a85201 [ 303.301412] x5 : 0000000000000000 x4 : ffff0000020c9800 x3 : 00000000000007fc [ 303.302370] x2 : 0000000000000027 x1 : ffff000002467400 x0 : ffff000002467000 [ 303.303341] Call trace: [ 303.303679] 0x0 [ 303.303938] efivar_entry_set_get_size+0x98/0x16c [ 303.304585] efivarfs_file_write+0xd0/0x1a4 [ 303.305148] vfs_write+0xc4/0x2e4 [ 303.305601] ksys_write+0x70/0x104 [ 303.306073] __arm64_sys_write+0x1c/0x28 [ 303.306622] invoke_syscall+0x48/0x114 [ 303.307156] el0_svc_common.constprop.0+0x44/0xec [ 303.307803] do_el0_svc+0x38/0x98 [ 303.308268] el0_svc+0x2c/0x84 [ 303.308702] el0t_64_sync_handler+0xf4/0x120 [ 303.309293] el0t_64_sync+0x190/0x194 [ 303.309794] Code: ???????? ???????? ???????? ???????? (????????) [ 303.310612] ---[ end trace 0000000000000000 ]--- Fix this by adding a .reconfigure() function to the fs operations which we can use to check the requested flags and deny anything that's not RO if the firmware doesn't implement SetVariable at runtime. |
| CVE-2023-52462 | In the Linux kernel, the following vulnerability has been resolved: bpf: fix check for attempt to corrupt spilled pointer When register is spilled onto a stack as a 1/2/4-byte register, we set slot_type[BPF_REG_SIZE - 1] (plus potentially few more below it, depending on actual spill size). So to check if some stack slot has spilled register we need to consult slot_type[7], not slot_type[0]. To avoid the need to remember and double-check this in the future, just use is_spilled_reg() helper. |
| CVE-2023-52461 | In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix bounds limiting when given a malformed entity If we're given a malformed entity in drm_sched_entity_init()--shouldn't happen, but we verify--with out-of-bounds priority value, we set it to an allowed value. Fix the expression which sets this limit. |
| CVE-2023-52460 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference at hibernate During hibernate sequence the source context might not have a clk_mgr. So don't use it to look for DML2 support. |
| CVE-2023-52459 | In the Linux kernel, the following vulnerability has been resolved: media: v4l: async: Fix duplicated list deletion The list deletion call dropped here is already called from the helper function in the line before. Having a second list_del() call results in either a warning (with CONFIG_DEBUG_LIST=y): list_del corruption, c46c8198->next is LIST_POISON1 (00000100) If CONFIG_DEBUG_LIST is disabled the operation results in a kernel error due to NULL pointer dereference. |
| CVE-2023-52458 | In the Linux kernel, the following vulnerability has been resolved: block: add check that partition length needs to be aligned with block size Before calling add partition or resize partition, there is no check on whether the length is aligned with the logical block size. If the logical block size of the disk is larger than 512 bytes, then the partition size maybe not the multiple of the logical block size, and when the last sector is read, bio_truncate() will adjust the bio size, resulting in an IO error if the size of the read command is smaller than the logical block size.If integrity data is supported, this will also result in a null pointer dereference when calling bio_integrity_free. |
| CVE-2023-52457 | In the Linux kernel, the following vulnerability has been resolved: serial: 8250: omap: Don't skip resource freeing if pm_runtime_resume_and_get() failed Returning an error code from .remove() makes the driver core emit the little helpful error message: remove callback returned a non-zero value. This will be ignored. and then remove the device anyhow. So all resources that were not freed are leaked in this case. Skipping serial8250_unregister_port() has the potential to keep enough of the UART around to trigger a use-after-free. So replace the error return (and with it the little helpful error message) by a more useful error message and continue to cleanup. |
| CVE-2023-52456 | In the Linux kernel, the following vulnerability has been resolved: serial: imx: fix tx statemachine deadlock When using the serial port as RS485 port, the tx statemachine is used to control the RTS pin to drive the RS485 transceiver TX_EN pin. When the TTY port is closed in the middle of a transmission (for instance during userland application crash), imx_uart_shutdown disables the interface and disables the Transmission Complete interrupt. afer that, imx_uart_stop_tx bails on an incomplete transmission, to be retriggered by the TC interrupt. This interrupt is disabled and therefore the tx statemachine never transitions out of SEND. The statemachine is in deadlock now, and the TX_EN remains low, making the interface useless. imx_uart_stop_tx now checks for incomplete transmission AND whether TC interrupts are enabled before bailing to be retriggered. This makes sure the state machine handling is reached, and is properly set to WAIT_AFTER_SEND. |
| CVE-2023-52455 | In the Linux kernel, the following vulnerability has been resolved: iommu: Don't reserve 0-length IOVA region When the bootloader/firmware doesn't setup the framebuffers, their address and size are 0 in "iommu-addresses" property. If IOVA region is reserved with 0 length, then it ends up corrupting the IOVA rbtree with an entry which has pfn_hi < pfn_lo. If we intend to use display driver in kernel without framebuffer then it's causing the display IOMMU mappings to fail as entire valid IOVA space is reserved when address and length are passed as 0. An ideal solution would be firmware removing the "iommu-addresses" property and corresponding "memory-region" if display is not present. But the kernel should be able to handle this by checking for size of IOVA region and skipping the IOVA reservation if size is 0. Also, add a warning if firmware is requesting 0-length IOVA region reservation. |
| CVE-2023-52454 | In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length If the host sends an H2CData command with an invalid DATAL, the kernel may crash in nvmet_tcp_build_pdu_iovec(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 lr : nvmet_tcp_io_work+0x6ac/0x718 [nvmet_tcp] Call trace: process_one_work+0x174/0x3c8 worker_thread+0x2d0/0x3e8 kthread+0x104/0x110 Fix the bug by raising a fatal error if DATAL isn't coherent with the packet size. Also, the PDU length should never exceed the MAXH2CDATA parameter which has been communicated to the host in nvmet_tcp_handle_icreq(). |
| CVE-2023-52453 | In the Linux kernel, the following vulnerability has been resolved: hisi_acc_vfio_pci: Update migration data pointer correctly on saving/resume When the optional PRE_COPY support was added to speed up the device compatibility check, it failed to update the saving/resuming data pointers based on the fd offset. This results in migration data corruption and when the device gets started on the destination the following error is reported in some cases, [ 478.907684] arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received: [ 478.913691] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000310200000010 [ 478.919603] arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000007f [ 478.925515] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 [ 478.931425] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 [ 478.947552] hisi_zip 0000:31:00.0: qm_axi_rresp [error status=0x1] found [ 478.955930] hisi_zip 0000:31:00.0: qm_db_timeout [error status=0x400] found [ 478.955944] hisi_zip 0000:31:00.0: qm sq doorbell timeout in function 2 |
| CVE-2023-52452 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix accesses to uninit stack slots Privileged programs are supposed to be able to read uninitialized stack memory (ever since 6715df8d5) but, before this patch, these accesses were permitted inconsistently. In particular, accesses were permitted above state->allocated_stack, but not below it. In other words, if the stack was already "large enough", the access was permitted, but otherwise the access was rejected instead of being allowed to "grow the stack". This undesired rejection was happening in two places: - in check_stack_slot_within_bounds() - in check_stack_range_initialized() This patch arranges for these accesses to be permitted. A bunch of tests that were relying on the old rejection had to change; all of them were changed to add also run unprivileged, in which case the old behavior persists. One tests couldn't be updated - global_func16 - because it can't run unprivileged for other reasons. This patch also fixes the tracking of the stack size for variable-offset reads. This second fix is bundled in the same commit as the first one because they're inter-related. Before this patch, writes to the stack using registers containing a variable offset (as opposed to registers with fixed, known values) were not properly contributing to the function's needed stack size. As a result, it was possible for a program to verify, but then to attempt to read out-of-bounds data at runtime because a too small stack had been allocated for it. Each function tracks the size of the stack it needs in bpf_subprog_info.stack_depth, which is maintained by update_stack_depth(). For regular memory accesses, check_mem_access() was calling update_state_depth() but it was passing in only the fixed part of the offset register, ignoring the variable offset. This was incorrect; the minimum possible value of that register should be used instead. This tracking is now fixed by centralizing the tracking of stack size in grow_stack_state(), and by lifting the calls to grow_stack_state() to check_stack_access_within_bounds() as suggested by Andrii. The code is now simpler and more convincingly tracks the correct maximum stack size. check_stack_range_initialized() can now rely on enough stack having been allocated for the access; this helps with the fix for the first issue. A few tests were changed to also check the stack depth computation. The one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv. |
| CVE-2023-52451 | In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/memhp: Fix access beyond end of drmem array dlpar_memory_remove_by_index() may access beyond the bounds of the drmem lmb array when the LMB lookup fails to match an entry with the given DRC index. When the search fails, the cursor is left pointing to &drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the last valid entry in the array. The debug message at the end of the function then dereferences this pointer: pr_debug("Failed to hot-remove memory at %llx\n", lmb->base_addr); This was found by inspection and confirmed with KASAN: pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234 ================================================================== BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658 Read of size 8 at addr c000000364e97fd0 by task bash/949 dump_stack_lvl+0xa4/0xfc (unreliable) print_report+0x214/0x63c kasan_report+0x140/0x2e0 __asan_load8+0xa8/0xe0 dlpar_memory+0x298/0x1658 handle_dlpar_errorlog+0x130/0x1d0 dlpar_store+0x18c/0x3e0 kobj_attr_store+0x68/0xa0 sysfs_kf_write+0xc4/0x110 kernfs_fop_write_iter+0x26c/0x390 vfs_write+0x2d4/0x4e0 ksys_write+0xac/0x1a0 system_call_exception+0x268/0x530 system_call_vectored_common+0x15c/0x2ec Allocated by task 1: kasan_save_stack+0x48/0x80 kasan_set_track+0x34/0x50 kasan_save_alloc_info+0x34/0x50 __kasan_kmalloc+0xd0/0x120 __kmalloc+0x8c/0x320 kmalloc_array.constprop.0+0x48/0x5c drmem_init+0x2a0/0x41c do_one_initcall+0xe0/0x5c0 kernel_init_freeable+0x4ec/0x5a0 kernel_init+0x30/0x1e0 ret_from_kernel_user_thread+0x14/0x1c The buggy address belongs to the object at c000000364e80000 which belongs to the cache kmalloc-128k of size 131072 The buggy address is located 0 bytes to the right of allocated 98256-byte region [c000000364e80000, c000000364e97fd0) ================================================================== pseries-hotplug-mem: Failed to hot-remove memory at 0 Log failed lookups with a separate message and dereference the cursor only when it points to a valid entry. |
| CVE-2023-52450 | In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology() Get logical socket id instead of physical id in discover_upi_topology() to avoid out-of-bound access on 'upi = &type->topology[nid][idx];' line that leads to NULL pointer dereference in upi_fill_topology() |
| CVE-2023-52449 | In the Linux kernel, the following vulnerability has been resolved: mtd: Fix gluebi NULL pointer dereference caused by ftl notifier If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME. |
| CVE-2023-52448 | In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump Syzkaller has reported a NULL pointer dereference when accessing rgd->rd_rgl in gfs2_rgrp_dump(). This can happen when creating rgd->rd_gl fails in read_rindex_entry(). Add a NULL pointer check in gfs2_rgrp_dump() to prevent that. |
| CVE-2023-52447 | In the Linux kernel, the following vulnerability has been resolved: bpf: Defer the free of inner map when necessary When updating or deleting an inner map in map array or map htab, the map may still be accessed by non-sleepable program or sleepable program. However bpf_map_fd_put_ptr() decreases the ref-counter of the inner map directly through bpf_map_put(), if the ref-counter is the last one (which is true for most cases), the inner map will be freed by ops->map_free() in a kworker. But for now, most .map_free() callbacks don't use synchronize_rcu() or its variants to wait for the elapse of a RCU grace period, so after the invocation of ops->map_free completes, the bpf program which is accessing the inner map may incur use-after-free problem. Fix the free of inner map by invoking bpf_map_free_deferred() after both one RCU grace period and one tasks trace RCU grace period if the inner map has been removed from the outer map before. The deferment is accomplished by using call_rcu() or call_rcu_tasks_trace() when releasing the last ref-counter of bpf map. The newly-added rcu_head field in bpf_map shares the same storage space with work field to reduce the size of bpf_map. |
| CVE-2023-52446 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a race condition between btf_put() and map_free() When running `./test_progs -j` in my local vm with latest kernel, I once hit a kasan error like below: [ 1887.184724] BUG: KASAN: slab-use-after-free in bpf_rb_root_free+0x1f8/0x2b0 [ 1887.185599] Read of size 4 at addr ffff888106806910 by task kworker/u12:2/2830 [ 1887.186498] [ 1887.186712] CPU: 3 PID: 2830 Comm: kworker/u12:2 Tainted: G OEL 6.7.0-rc3-00699-g90679706d486-dirty #494 [ 1887.188034] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1887.189618] Workqueue: events_unbound bpf_map_free_deferred [ 1887.190341] Call Trace: [ 1887.190666] <TASK> [ 1887.190949] dump_stack_lvl+0xac/0xe0 [ 1887.191423] ? nf_tcp_handle_invalid+0x1b0/0x1b0 [ 1887.192019] ? panic+0x3c0/0x3c0 [ 1887.192449] print_report+0x14f/0x720 [ 1887.192930] ? preempt_count_sub+0x1c/0xd0 [ 1887.193459] ? __virt_addr_valid+0xac/0x120 [ 1887.194004] ? bpf_rb_root_free+0x1f8/0x2b0 [ 1887.194572] kasan_report+0xc3/0x100 [ 1887.195085] ? bpf_rb_root_free+0x1f8/0x2b0 [ 1887.195668] bpf_rb_root_free+0x1f8/0x2b0 [ 1887.196183] ? __bpf_obj_drop_impl+0xb0/0xb0 [ 1887.196736] ? preempt_count_sub+0x1c/0xd0 [ 1887.197270] ? preempt_count_sub+0x1c/0xd0 [ 1887.197802] ? _raw_spin_unlock+0x1f/0x40 [ 1887.198319] bpf_obj_free_fields+0x1d4/0x260 [ 1887.198883] array_map_free+0x1a3/0x260 [ 1887.199380] bpf_map_free_deferred+0x7b/0xe0 [ 1887.199943] process_scheduled_works+0x3a2/0x6c0 [ 1887.200549] worker_thread+0x633/0x890 [ 1887.201047] ? __kthread_parkme+0xd7/0xf0 [ 1887.201574] ? kthread+0x102/0x1d0 [ 1887.202020] kthread+0x1ab/0x1d0 [ 1887.202447] ? pr_cont_work+0x270/0x270 [ 1887.202954] ? kthread_blkcg+0x50/0x50 [ 1887.203444] ret_from_fork+0x34/0x50 [ 1887.203914] ? kthread_blkcg+0x50/0x50 [ 1887.204397] ret_from_fork_asm+0x11/0x20 [ 1887.204913] </TASK> [ 1887.204913] </TASK> [ 1887.205209] [ 1887.205416] Allocated by task 2197: [ 1887.205881] kasan_set_track+0x3f/0x60 [ 1887.206366] __kasan_kmalloc+0x6e/0x80 [ 1887.206856] __kmalloc+0xac/0x1a0 [ 1887.207293] btf_parse_fields+0xa15/0x1480 [ 1887.207836] btf_parse_struct_metas+0x566/0x670 [ 1887.208387] btf_new_fd+0x294/0x4d0 [ 1887.208851] __sys_bpf+0x4ba/0x600 [ 1887.209292] __x64_sys_bpf+0x41/0x50 [ 1887.209762] do_syscall_64+0x4c/0xf0 [ 1887.210222] entry_SYSCALL_64_after_hwframe+0x63/0x6b [ 1887.210868] [ 1887.211074] Freed by task 36: [ 1887.211460] kasan_set_track+0x3f/0x60 [ 1887.211951] kasan_save_free_info+0x28/0x40 [ 1887.212485] ____kasan_slab_free+0x101/0x180 [ 1887.213027] __kmem_cache_free+0xe4/0x210 [ 1887.213514] btf_free+0x5b/0x130 [ 1887.213918] rcu_core+0x638/0xcc0 [ 1887.214347] __do_softirq+0x114/0x37e The error happens at bpf_rb_root_free+0x1f8/0x2b0: 00000000000034c0 <bpf_rb_root_free>: ; { 34c0: f3 0f 1e fa endbr64 34c4: e8 00 00 00 00 callq 0x34c9 <bpf_rb_root_free+0x9> 34c9: 55 pushq %rbp 34ca: 48 89 e5 movq %rsp, %rbp ... ; if (rec && rec->refcount_off >= 0 && 36aa: 4d 85 ed testq %r13, %r13 36ad: 74 a9 je 0x3658 <bpf_rb_root_free+0x198> 36af: 49 8d 7d 10 leaq 0x10(%r13), %rdi 36b3: e8 00 00 00 00 callq 0x36b8 <bpf_rb_root_free+0x1f8> <==== kasan function 36b8: 45 8b 7d 10 movl 0x10(%r13), %r15d <==== use-after-free load 36bc: 45 85 ff testl %r15d, %r15d 36bf: 78 8c js 0x364d <bpf_rb_root_free+0x18d> So the problem ---truncated--- |
| CVE-2023-52445 | In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix use after free on context disconnection Upon module load, a kthread is created targeting the pvr2_context_thread_func function, which may call pvr2_context_destroy and thus call kfree() on the context object. However, that might happen before the usb hub_event handler is able to notify the driver. This patch adds a sanity check before the invalid read reported by syzbot, within the context disconnection call stack. |
| CVE-2023-52444 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid dirent corruption As Al reported in link[1]: f2fs_rename() ... if (old_dir != new_dir && !whiteout) f2fs_set_link(old_inode, old_dir_entry, old_dir_page, new_dir); else f2fs_put_page(old_dir_page, 0); You want correct inumber in the ".." link. And cross-directory rename does move the source to new parent, even if you'd been asked to leave a whiteout in the old place. [1] https://lore.kernel.org/all/20231017055040.GN800259@ZenIV/ With below testcase, it may cause dirent corruption, due to it missed to call f2fs_set_link() to update ".." link to new directory. - mkdir -p dir/foo - renameat2 -w dir/foo bar [ASSERT] (__chk_dots_dentries:1421) --> Bad inode number[0x4] for '..', parent parent ino is [0x3] [FSCK] other corrupted bugs [Fail] |
| CVE-2023-52443 | In the Linux kernel, the following vulnerability has been resolved: apparmor: avoid crash when parsed profile name is empty When processing a packed profile in unpack_profile() described like "profile :ns::samba-dcerpcd /usr/lib*/samba/{,samba/}samba-dcerpcd {...}" a string ":samba-dcerpcd" is unpacked as a fully-qualified name and then passed to aa_splitn_fqname(). aa_splitn_fqname() treats ":samba-dcerpcd" as only containing a namespace. Thus it returns NULL for tmpname, meanwhile tmpns is non-NULL. Later aa_alloc_profile() crashes as the new profile name is NULL now. general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 6 PID: 1657 Comm: apparmor_parser Not tainted 6.7.0-rc2-dirty #16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:strlen+0x1e/0xa0 Call Trace: <TASK> ? strlen+0x1e/0xa0 aa_policy_init+0x1bb/0x230 aa_alloc_profile+0xb1/0x480 unpack_profile+0x3bc/0x4960 aa_unpack+0x309/0x15e0 aa_replace_profiles+0x213/0x33c0 policy_update+0x261/0x370 profile_replace+0x20e/0x2a0 vfs_write+0x2af/0xe00 ksys_write+0x126/0x250 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:strlen+0x1e/0xa0 It seems such behaviour of aa_splitn_fqname() is expected and checked in other places where it is called (e.g. aa_remove_profiles). Well, there is an explicit comment "a ns name without a following profile is allowed" inside. AFAICS, nothing can prevent unpacked "name" to be in form like ":samba-dcerpcd" - it is passed from userspace. Deny the whole profile set replacement in such case and inform user with EPROTO and an explaining message. Found by Linux Verification Center (linuxtesting.org). |
| CVE-2023-52442 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate session id and tree id in compound request `smb2_get_msg()` in smb2_get_ksmbd_tcon() and smb2_check_user_session() will always return the first request smb2 header in a compound request. if `SMB2_TREE_CONNECT_HE` is the first command in compound request, will return 0, i.e. The tree id check is skipped. This patch use ksmbd_req_buf_next() to get current command in compound. |
| CVE-2023-52441 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out of bounds in init_smb2_rsp_hdr() If client send smb2 negotiate request and then send smb1 negotiate request, init_smb2_rsp_hdr is called for smb1 negotiate request since need_neg is set to false. This patch ignore smb1 packets after ->need_neg is set to false. |
| CVE-2023-52440 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob() If authblob->SessionKey.Length is bigger than session key size(CIFS_KEY_SIZE), slub overflow can happen in key exchange codes. cifs_arc4_crypt copy to session key array from SessionKey from client. |
| CVE-2023-52439 | In the Linux kernel, the following vulnerability has been resolved: uio: Fix use-after-free in uio_open core-1 core-2 ------------------------------------------------------- uio_unregister_device uio_open idev = idr_find() device_unregister(&idev->dev) put_device(&idev->dev) uio_device_release get_device(&idev->dev) kfree(idev) uio_free_minor(minor) uio_release put_device(&idev->dev) kfree(idev) ------------------------------------------------------- In the core-1 uio_unregister_device(), the device_unregister will kfree idev when the idev->dev kobject ref is 1. But after core-1 device_unregister, put_device and before doing kfree, the core-2 may get_device. Then: 1. After core-1 kfree idev, the core-2 will do use-after-free for idev. 2. When core-2 do uio_release and put_device, the idev will be double freed. To address this issue, we can get idev atomic & inc idev reference with minor_lock. |
| CVE-2023-52438 | In the Linux kernel, the following vulnerability has been resolved: binder: fix use-after-free in shinker's callback The mmap read lock is used during the shrinker's callback, which means that using alloc->vma pointer isn't safe as it can race with munmap(). As of commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") the mmap lock is downgraded after the vma has been isolated. I was able to reproduce this issue by manually adding some delays and triggering page reclaiming through the shrinker's debug sysfs. The following KASAN report confirms the UAF: ================================================================== BUG: KASAN: slab-use-after-free in zap_page_range_single+0x470/0x4b8 Read of size 8 at addr ffff356ed50e50f0 by task bash/478 CPU: 1 PID: 478 Comm: bash Not tainted 6.6.0-rc5-00055-g1c8b86a3799f-dirty #70 Hardware name: linux,dummy-virt (DT) Call trace: zap_page_range_single+0x470/0x4b8 binder_alloc_free_page+0x608/0xadc __list_lru_walk_one+0x130/0x3b0 list_lru_walk_node+0xc4/0x22c binder_shrink_scan+0x108/0x1dc shrinker_debugfs_scan_write+0x2b4/0x500 full_proxy_write+0xd4/0x140 vfs_write+0x1ac/0x758 ksys_write+0xf0/0x1dc __arm64_sys_write+0x6c/0x9c Allocated by task 492: kmem_cache_alloc+0x130/0x368 vm_area_alloc+0x2c/0x190 mmap_region+0x258/0x18bc do_mmap+0x694/0xa60 vm_mmap_pgoff+0x170/0x29c ksys_mmap_pgoff+0x290/0x3a0 __arm64_sys_mmap+0xcc/0x144 Freed by task 491: kmem_cache_free+0x17c/0x3c8 vm_area_free_rcu_cb+0x74/0x98 rcu_core+0xa38/0x26d4 rcu_core_si+0x10/0x1c __do_softirq+0x2fc/0xd24 Last potentially related work creation: __call_rcu_common.constprop.0+0x6c/0xba0 call_rcu+0x10/0x1c vm_area_free+0x18/0x24 remove_vma+0xe4/0x118 do_vmi_align_munmap.isra.0+0x718/0xb5c do_vmi_munmap+0xdc/0x1fc __vm_munmap+0x10c/0x278 __arm64_sys_munmap+0x58/0x7c Fix this issue by performing instead a vma_lookup() which will fail to find the vma that was isolated before the mmap lock downgrade. Note that this option has better performance than upgrading to a mmap write lock which would increase contention. Plus, mmap_write_trylock() has been recently removed anyway. |
| CVE-2023-52436 | In the Linux kernel, the following vulnerability has been resolved: f2fs: explicitly null-terminate the xattr list When setting an xattr, explicitly null-terminate the xattr list. This eliminates the fragile assumption that the unused xattr space is always zeroed. |
| CVE-2023-52435 | In the Linux kernel, the following vulnerability has been resolved: net: prevent mss overflow in skb_segment() Once again syzbot is able to crash the kernel in skb_segment() [1] GSO_BY_FRAGS is a forbidden value, but unfortunately the following computation in skb_segment() can reach it quite easily : mss = mss * partial_segs; 65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to a bad final result. Make sure to limit segmentation so that the new mss value is smaller than GSO_BY_FRAGS. [1] general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551 Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00 RSP: 0018:ffffc900043473d0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597 RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070 RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0 R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046 FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109 ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120 skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53 __skb_gso_segment+0x339/0x710 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626 __dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f8692032aa9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9 RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480 R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551 Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00 RSP: 0018:ffffc900043473d0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597 RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070 RBP: ffffc90004347578 R0 ---truncated--- |
| CVE-2023-52434 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential OOBs in smb2_parse_contexts() Validate offsets and lengths before dereferencing create contexts in smb2_parse_contexts(). This fixes following oops when accessing invalid create contexts from server: BUG: unable to handle page fault for address: ffff8881178d8cc3 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 4a01067 P4D 4a01067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1736 Comm: mount.cifs Not tainted 6.7.0-rc4 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:smb2_parse_contexts+0xa0/0x3a0 [cifs] Code: f8 10 75 13 48 b8 93 ad 25 50 9c b4 11 e7 49 39 06 0f 84 d2 00 00 00 8b 45 00 85 c0 74 61 41 29 c5 48 01 c5 41 83 fd 0f 76 55 <0f> b7 7d 04 0f b7 45 06 4c 8d 74 3d 00 66 83 f8 04 75 bc ba 04 00 RSP: 0018:ffffc900007939e0 EFLAGS: 00010216 RAX: ffffc90000793c78 RBX: ffff8880180cc000 RCX: ffffc90000793c90 RDX: ffffc90000793cc0 RSI: ffff8880178d8cc0 RDI: ffff8880180cc000 RBP: ffff8881178d8cbf R08: ffffc90000793c22 R09: 0000000000000000 R10: ffff8880180cc000 R11: 0000000000000024 R12: 0000000000000000 R13: 0000000000000020 R14: 0000000000000000 R15: ffffc90000793c22 FS: 00007f873753cbc0(0000) GS:ffff88806bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881178d8cc3 CR3: 00000000181ca000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x181/0x480 ? search_module_extables+0x19/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x1b6/0x1c0 ? asm_exc_page_fault+0x26/0x30 ? smb2_parse_contexts+0xa0/0x3a0 [cifs] SMB2_open+0x38d/0x5f0 [cifs] ? smb2_is_path_accessible+0x138/0x260 [cifs] smb2_is_path_accessible+0x138/0x260 [cifs] cifs_is_path_remote+0x8d/0x230 [cifs] cifs_mount+0x7e/0x350 [cifs] cifs_smb3_do_mount+0x128/0x780 [cifs] smb3_get_tree+0xd9/0x290 [cifs] vfs_get_tree+0x2c/0x100 ? capable+0x37/0x70 path_mount+0x2d7/0xb80 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __x64_sys_mount+0x11a/0x150 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f8737657b1e |
| CVE-2023-52433 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction New elements in this transaction might expired before such transaction ends. Skip sync GC for such elements otherwise commit path might walk over an already released object. Once transaction is finished, async GC will collect such expired element. |
| CVE-2023-52429 | dm_table_create in drivers/md/dm-table.c in the Linux kernel through 6.7.4 can attempt to (in alloc_targets) allocate more than INT_MAX bytes, and crash, because of a missing check for struct dm_ioctl.target_count. |
| CVE-2023-52340 | The IPv6 implementation in the Linux kernel before 6.3 has a net/ipv6/route.c max_size threshold that can be consumed easily, e.g., leading to a denial of service (network is unreachable errors) when IPv6 packets are sent in a loop via a raw socket. |
| CVE-2023-5197 | A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. Addition and removal of rules from chain bindings within the same transaction causes leads to use-after-free. We recommend upgrading past commit f15f29fd4779be8a418b66e9d52979bb6d6c2325. |
| CVE-2023-51782 | An issue was discovered in the Linux kernel before 6.6.8. rose_ioctl in net/rose/af_rose.c has a use-after-free because of a rose_accept race condition. |
| CVE-2023-51781 | An issue was discovered in the Linux kernel before 6.6.8. atalk_ioctl in net/appletalk/ddp.c has a use-after-free because of an atalk_recvmsg race condition. |
| CVE-2023-51780 | An issue was discovered in the Linux kernel before 6.6.8. do_vcc_ioctl in net/atm/ioctl.c has a use-after-free because of a vcc_recvmsg race condition. |
| CVE-2023-5178 | A use-after-free vulnerability was found in drivers/nvme/target/tcp.c` in `nvmet_tcp_free_crypto` due to a logical bug in the NVMe/TCP subsystem in the Linux kernel. This issue may allow a malicious user to cause a use-after-free and double-free problem, which may permit remote code execution or lead to local privilege escalation. |
| CVE-2023-51779 | bt_sock_recvmsg in net/bluetooth/af_bluetooth.c in the Linux kernel through 6.6.8 has a use-after-free because of a bt_sock_ioctl race condition. |
| CVE-2023-5158 | A flaw was found in vringh_kiov_advance in drivers/vhost/vringh.c in the host side of a virtio ring in the Linux Kernel. This issue may result in a denial of service from guest to host via zero length descriptor. |
| CVE-2023-51043 | In the Linux kernel before 6.4.5, drivers/gpu/drm/drm_atomic.c has a use-after-free during a race condition between a nonblocking atomic commit and a driver unload. |
| CVE-2023-51042 | In the Linux kernel before 6.4.12, amdgpu_cs_wait_all_fences in drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c has a fence use-after-free. |
| CVE-2023-50810 | In certain Sonos products before Sonos S1 Release 11.12 and S2 release 15.9, a vulnerability exists in the U-Boot component of the firmware that allow persistent arbitrary code execution with Linux kernel privileges. A failure to correctly handle the return value of the setenv command can be used to override the kernel command-line parameters and ultimately bypass the Secure Boot implementation. This affects PLAY5 gen 2, PLAYBASE, PLAY:1, One, One SL, and Amp. |
| CVE-2023-50431 | sec_attest_info in drivers/accel/habanalabs/common/habanalabs_ioctl.c in the Linux kernel through 6.6.5 allows an information leak to user space because info->pad0 is not initialized. |
| CVE-2023-4921 | A use-after-free vulnerability in the Linux kernel's net/sched: sch_qfq component can be exploited to achieve local privilege escalation. When the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue(). We recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8. |
| CVE-2023-49100 | Trusted Firmware-A (TF-A) before 2.10 has a potential read out-of-bounds in the SDEI service. The input parameter passed in register x1 is not validated well enough in the function sdei_interrupt_bind. The parameter is passed to a call to plat_ic_get_interrupt_type. It can be any arbitrary value passing checks in the function plat_ic_is_sgi. A compromised Normal World (Linux kernel) can enable a root-privileged attacker to issue arbitrary SMC calls. Using this primitive, he can control the content of registers x0 through x6, which are used to send parameters to TF-A. Out-of-bounds addresses can be read in the context of TF-A (EL3). Because the read value is never returned to non-secure memory or in registers, no leak is possible. An attacker can still crash TF-A, however. |
| CVE-2023-4881 | ** REJECT ** CVE-2023-4881 was wrongly assigned to a bug that was deemed to be a non-security issue by the Linux kernel security team. |
| CVE-2023-4732 | A flaw was found in pfn_swap_entry_to_page in memory management subsystem in the Linux Kernel. In this flaw, an attacker with a local user privilege may cause a denial of service problem due to a BUG statement referencing pmd_t x. |
| CVE-2023-47233 | The brcm80211 component in the Linux kernel through 6.5.10 has a brcmf_cfg80211_detach use-after-free in the device unplugging (disconnect the USB by hotplug) code. For physically proximate attackers with local access, this "could be exploited in a real world scenario." This is related to brcmf_cfg80211_escan_timeout_worker in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c. |
| CVE-2023-4705 | ** REJECT ** CVE-2023-4705 was wrongly assigned to a bug that was deemed to be a non-security issue by the Linux kernel security team. |
| CVE-2023-46862 | An issue was discovered in the Linux kernel through 6.5.9. During a race with SQ thread exit, an io_uring/fdinfo.c io_uring_show_fdinfo NULL pointer dereference can occur. |
| CVE-2023-46813 | An issue was discovered in the Linux kernel before 6.5.9, exploitable by local users with userspace access to MMIO registers. Incorrect access checking in the #VC handler and instruction emulation of the SEV-ES emulation of MMIO accesses could lead to arbitrary write access to kernel memory (and thus privilege escalation). This depends on a race condition through which userspace can replace an instruction before the #VC handler reads it. |
| CVE-2023-46343 | In the Linux kernel before 6.5.9, there is a NULL pointer dereference in send_acknowledge in net/nfc/nci/spi.c. |
| CVE-2023-4623 | A use-after-free vulnerability in the Linux kernel's net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation. If a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free. We recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f. |
| CVE-2023-4622 | A use-after-free vulnerability in the Linux kernel's af_unix component can be exploited to achieve local privilege escalation. The unix_stream_sendpage() function tries to add data to the last skb in the peer's recv queue without locking the queue. Thus there is a race where unix_stream_sendpage() could access an skb locklessly that is being released by garbage collection, resulting in use-after-free. We recommend upgrading past commit 790c2f9d15b594350ae9bca7b236f2b1859de02c. |
| CVE-2023-4611 | A use-after-free flaw was found in mm/mempolicy.c in the memory management subsystem in the Linux Kernel. This issue is caused by a race between mbind() and VMA-locked page fault, and may allow a local attacker to crash the system or lead to a kernel information leak. |
| CVE-2023-45898 | The Linux kernel before 6.5.4 has an es1 use-after-free in fs/ext4/extents_status.c, related to ext4_es_insert_extent. |
| CVE-2023-45896 | ntfs3 in the Linux kernel through 6.8.0 allows a physically proximate attacker to read kernel memory by mounting a filesystem (e.g., if a Linux distribution is configured to allow unprivileged mounts of removable media) and then leveraging local access to trigger an out-of-bounds read. A length value can be larger than the amount of memory allocated. NOTE: the supplier's perspective is that there is no vulnerability when an attack requires an attacker-modified filesystem image. |
| CVE-2023-45871 | An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU. |
| CVE-2023-45863 | An issue was discovered in lib/kobject.c in the Linux kernel before 6.2.3. With root access, an attacker can trigger a race condition that results in a fill_kobj_path out-of-bounds write. |
| CVE-2023-45862 | An issue was discovered in drivers/usb/storage/ene_ub6250.c for the ENE UB6250 reader driver in the Linux kernel before 6.2.5. An object could potentially extend beyond the end of an allocation. |
| CVE-2023-4569 | A memory leak flaw was found in nft_set_catchall_flush in net/netfilter/nf_tables_api.c in the Linux Kernel. This issue may allow a local attacker to cause double-deactivations of catchall elements, which can result in a memory leak. |
| CVE-2023-4459 | A NULL pointer dereference flaw was found in vmxnet3_rq_cleanup in drivers/net/vmxnet3/vmxnet3_drv.c in the networking sub-component in vmxnet3 in the Linux Kernel. This issue may allow a local attacker with normal user privilege to cause a denial of service due to a missing sanity check during cleanup. |
| CVE-2023-44466 | An issue was discovered in net/ceph/messenger_v2.c in the Linux kernel before 6.4.5. There is an integer signedness error, leading to a buffer overflow and remote code execution via HELLO or one of the AUTH frames. This occurs because of an untrusted length taken from a TCP packet in ceph_decode_32. |
| CVE-2023-4394 | A use-after-free flaw was found in btrfs_get_dev_args_from_path in fs/btrfs/volumes.c in btrfs file-system in the Linux Kernel. This flaw allows a local attacker with special privileges to cause a system crash or leak internal kernel information |
| CVE-2023-4389 | A flaw was found in btrfs_get_root_ref in fs/btrfs/disk-io.c in the btrfs filesystem in the Linux Kernel due to a double decrement of the reference count. This issue may allow a local attacker with user privilege to crash the system or may lead to leaked internal kernel information. |
| CVE-2023-4387 | A use-after-free flaw was found in vmxnet3_rq_alloc_rx_buf in drivers/net/vmxnet3/vmxnet3_drv.c in VMware's vmxnet3 ethernet NIC driver in the Linux Kernel. This issue could allow a local attacker to crash the system due to a double-free while cleaning up vmxnet3_rq_cleanup_all, which could also lead to a kernel information leak problem. |
| CVE-2023-4385 | A NULL pointer dereference flaw was found in dbFree in fs/jfs/jfs_dmap.c in the journaling file system (JFS) in the Linux Kernel. This issue may allow a local attacker to crash the system due to a missing sanity check. |
| CVE-2023-42756 | A flaw was found in the Netfilter subsystem of the Linux kernel. A race condition between IPSET_CMD_ADD and IPSET_CMD_SWAP can lead to a kernel panic due to the invocation of `__ip_set_put` on a wrong `set`. This issue may allow a local user to crash the system. |
| CVE-2023-42755 | A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service. |
| CVE-2023-42754 | A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system. |
| CVE-2023-42753 | An array indexing vulnerability was found in the netfilter subsystem of the Linux kernel. A missing macro could lead to a miscalculation of the `h->nets` array offset, providing attackers with the primitive to arbitrarily increment/decrement a memory buffer out-of-bound. This issue may allow a local user to crash the system or potentially escalate their privileges on the system. |
| CVE-2023-42752 | An integer overflow flaw was found in the Linux kernel. This issue leads to the kernel allocating `skb_shared_info` in the userspace, which is exploitable in systems without SMAP protection since `skb_shared_info` contains references to function pointers. |
| CVE-2023-4273 | A flaw was found in the exFAT driver of the Linux kernel. The vulnerability exists in the implementation of the file name reconstruction function, which is responsible for reading file name entries from a directory index and merging file name parts belonging to one file into a single long file name. Since the file name characters are copied into a stack variable, a local privileged attacker could use this flaw to overflow the kernel stack. |
| CVE-2023-4244 | A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. Due to a race condition between nf_tables netlink control plane transaction and nft_set element garbage collection, it is possible to underflow the reference counter causing a use-after-free vulnerability. We recommend upgrading past commit 3e91b0ebd994635df2346353322ac51ce84ce6d8. |
| CVE-2023-4208 | A use-after-free vulnerability in the Linux kernel's net/sched: cls_u32 component can be exploited to achieve local privilege escalation. When u32_change() is called on an existing filter, the whole tcf_result struct is always copied into the new instance of the filter. This causes a problem when updating a filter bound to a class, as tcf_unbind_filter() is always called on the old instance in the success path, decreasing filter_cnt of the still referenced class and allowing it to be deleted, leading to a use-after-free. We recommend upgrading past commit 3044b16e7c6fe5d24b1cdbcf1bd0a9d92d1ebd81. |
| CVE-2023-4207 | A use-after-free vulnerability in the Linux kernel's net/sched: cls_fw component can be exploited to achieve local privilege escalation. When fw_change() is called on an existing filter, the whole tcf_result struct is always copied into the new instance of the filter. This causes a problem when updating a filter bound to a class, as tcf_unbind_filter() is always called on the old instance in the success path, decreasing filter_cnt of the still referenced class and allowing it to be deleted, leading to a use-after-free. We recommend upgrading past commit 76e42ae831991c828cffa8c37736ebfb831ad5ec. |
| CVE-2023-4206 | A use-after-free vulnerability in the Linux kernel's net/sched: cls_route component can be exploited to achieve local privilege escalation. When route4_change() is called on an existing filter, the whole tcf_result struct is always copied into the new instance of the filter. This causes a problem when updating a filter bound to a class, as tcf_unbind_filter() is always called on the old instance in the success path, decreasing filter_cnt of the still referenced class and allowing it to be deleted, leading to a use-after-free. We recommend upgrading past commit b80b829e9e2c1b3f7aae34855e04d8f6ecaf13c8. |
| CVE-2023-4194 | A flaw was found in the Linux kernel's TUN/TAP functionality. This issue could allow a local user to bypass network filters and gain unauthorized access to some resources. The original patches fixing CVE-2023-1076 are incorrect or incomplete. The problem is that the following upstream commits - a096ccca6e50 ("tun: tun_chr_open(): correctly initialize socket uid"), - 66b2c338adce ("tap: tap_open(): correctly initialize socket uid"), pass "inode->i_uid" to sock_init_data_uid() as the last parameter and that turns out to not be accurate. |
| CVE-2023-4155 | A flaw was found in KVM AMD Secure Encrypted Virtualization (SEV) in the Linux kernel. A KVM guest using SEV-ES or SEV-SNP with multiple vCPUs can trigger a double fetch race condition vulnerability and invoke the `VMGEXIT` handler recursively. If an attacker manages to call the handler multiple times, they can trigger a stack overflow and cause a denial of service or potentially guest-to-host escape in kernel configurations without stack guard pages (`CONFIG_VMAP_STACK`). |
| CVE-2023-4147 | A use-after-free flaw was found in the Linux kernel’s Netfilter functionality when adding a rule with NFTA_RULE_CHAIN_ID. This flaw allows a local user to crash or escalate their privileges on the system. |
| CVE-2023-4133 | A use-after-free vulnerability was found in the cxgb4 driver in the Linux kernel. The bug occurs when the cxgb4 device is detaching due to a possible rearming of the flower_stats_timer from the work queue. This flaw allows a local user to crash the system, causing a denial of service condition. |
| CVE-2023-41325 | OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.20 and prior to version 3.22, `shdr_verify_signature` can make a double free. `shdr_verify_signature` used to verify a TA binary before it is loaded. To verify a signature of it, allocate a memory for RSA key. RSA key allocate function (`sw_crypto_acipher_alloc_rsa_public_key`) will try to allocate a memory (which is optee’s heap memory). RSA key is consist of exponent and modulus (represent as variable `e`, `n`) and it allocation is not atomic way, so it may succeed in `e` but fail in `n`. In this case sw_crypto_acipher_alloc_rsa_public_key` will free on `e` and return as it is failed but variable ‘e’ is remained as already freed memory address . `shdr_verify_signature` will free again that memory (which is `e`) even it is freed when it failed allocate RSA key. A patch is available in version 3.22. No known workarounds are available. |
| CVE-2023-4132 | A use-after-free vulnerability was found in the siano smsusb module in the Linux kernel. The bug occurs during device initialization when the siano device is plugged in. This flaw allows a local user to crash the system, causing a denial of service condition. |
| CVE-2023-40791 | extract_user_to_sg in lib/scatterlist.c in the Linux kernel before 6.4.12 fails to unpin pages in a certain situation, as demonstrated by a WARNING for try_grab_page. |
| CVE-2023-40283 | An issue was discovered in l2cap_sock_release in net/bluetooth/l2cap_sock.c in the Linux kernel before 6.4.10. There is a use-after-free because the children of an sk are mishandled. |
| CVE-2023-4015 | A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. On an error when building a nftables rule, deactivating immediate expressions in nft_immediate_deactivate() can lead unbinding the chain and objects be deactivated but later used. We recommend upgrading past commit 0a771f7b266b02d262900c75f1e175c7fe76fec2. |
| CVE-2023-4010 | A flaw was found in the USB Host Controller Driver framework in the Linux kernel. The usb_giveback_urb function has a logic loophole in its implementation. Due to the inappropriate judgment condition of the goto statement, the function cannot return under the input of a specific malformed descriptor file, so it falls into an endless loop, resulting in a denial of service. |
| CVE-2023-4004 | A use-after-free flaw was found in the Linux kernel's netfilter in the way a user triggers the nft_pipapo_remove function with the element, without a NFT_SET_EXT_KEY_END. This issue could allow a local user to crash the system or potentially escalate their privileges on the system. |
| CVE-2023-39198 | A race condition was found in the QXL driver in the Linux kernel. The qxl_mode_dumb_create() function dereferences the qobj returned by the qxl_gem_object_create_with_handle(), but the handle is the only one holding a reference to it. This flaw allows an attacker to guess the returned handle value and trigger a use-after-free issue, potentially leading to a denial of service or privilege escalation. |
| CVE-2023-39197 | An out-of-bounds read vulnerability was found in Netfilter Connection Tracking (conntrack) in the Linux kernel. This flaw allows a remote user to disclose sensitive information via the DCCP protocol. |
| CVE-2023-39194 | A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure. |
| CVE-2023-39193 | A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure. |
| CVE-2023-39192 | A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure. |
| CVE-2023-39191 | An improper input validation flaw was found in the eBPF subsystem in the Linux kernel. The issue occurs due to a lack of proper validation of dynamic pointers within user-supplied eBPF programs prior to executing them. This may allow an attacker with CAP_BPF privileges to escalate privileges and execute arbitrary code in the context of the kernel. |
| CVE-2023-39189 | A flaw was found in the Netfilter subsystem in the Linux kernel. The nfnl_osf_add_callback function did not validate the user mode controlled opt_num field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure. |
| CVE-2023-3863 | A use-after-free flaw was found in nfc_llcp_find_local in net/nfc/llcp_core.c in NFC in the Linux kernel. This flaw allows a local user with special privileges to impact a kernel information leak issue. |
| CVE-2023-38432 | An issue was discovered in the Linux kernel before 6.3.10. fs/smb/server/smb2misc.c in ksmbd does not validate the relationship between the command payload size and the RFC1002 length specification, leading to an out-of-bounds read. |
| CVE-2023-38431 | An issue was discovered in the Linux kernel before 6.3.8. fs/smb/server/connection.c in ksmbd does not validate the relationship between the NetBIOS header's length field and the SMB header sizes, via pdu_size in ksmbd_conn_handler_loop, leading to an out-of-bounds read. |
| CVE-2023-38430 | An issue was discovered in the Linux kernel before 6.3.9. ksmbd does not validate the SMB request protocol ID, leading to an out-of-bounds read. |
| CVE-2023-38429 | An issue was discovered in the Linux kernel before 6.3.4. fs/ksmbd/connection.c in ksmbd has an off-by-one error in memory allocation (because of ksmbd_smb2_check_message) that may lead to out-of-bounds access. |
| CVE-2023-38428 | An issue was discovered in the Linux kernel before 6.3.4. fs/ksmbd/smb2pdu.c in ksmbd does not properly check the UserName value because it does not consider the address of security buffer, leading to an out-of-bounds read. |
| CVE-2023-38427 | An issue was discovered in the Linux kernel before 6.3.8. fs/smb/server/smb2pdu.c in ksmbd has an integer underflow and out-of-bounds read in deassemble_neg_contexts. |
| CVE-2023-38426 | An issue was discovered in the Linux kernel before 6.3.4. ksmbd has an out-of-bounds read in smb2_find_context_vals when create_context's name_len is larger than the tag length. |
| CVE-2023-38409 | An issue was discovered in set_con2fb_map in drivers/video/fbdev/core/fbcon.c in the Linux kernel before 6.2.12. Because an assignment occurs only for the first vc, the fbcon_registered_fb and fbcon_display arrays can be desynchronized in fbcon_mode_deleted (the con2fb_map points at the old fb_info). |
| CVE-2023-3812 | An out-of-bounds memory access flaw was found in the Linux kernel’s TUN/TAP device driver functionality in how a user generates a malicious (too big) networking packet when napi frags is enabled. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| CVE-2023-3777 | A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. When nf_tables_delrule() is flushing table rules, it is not checked whether the chain is bound and the chain's owner rule can also release the objects in certain circumstances. We recommend upgrading past commit 6eaf41e87a223ae6f8e7a28d6e78384ad7e407f8. |
| CVE-2023-3776 | A use-after-free vulnerability in the Linux kernel's net/sched: cls_fw component can be exploited to achieve local privilege escalation. If tcf_change_indev() fails, fw_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability. We recommend upgrading past commit 0323bce598eea038714f941ce2b22541c46d488f. |
| CVE-2023-3772 | A flaw was found in the Linux kernel’s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service. |
| CVE-2023-37454 | An issue was discovered in the Linux kernel through 6.4.2. A crafted UDF filesystem image causes a use-after-free write operation in the udf_put_super and udf_close_lvid functions in fs/udf/super.c. NOTE: the suse.com reference has a different perspective about this. |
| CVE-2023-37453 | An issue was discovered in the USB subsystem in the Linux kernel through 6.4.2. There is an out-of-bounds and crash in read_descriptors in drivers/usb/core/sysfs.c. |
| CVE-2023-3640 | A possible unauthorized memory access flaw was found in the Linux kernel's cpu_entry_area mapping of X86 CPU data to memory, where a user may guess the location of exception stacks or other important data. Based on the previous CVE-2023-0597, the 'Randomize per-cpu entry area' feature was implemented in /arch/x86/mm/cpu_entry_area.c, which works through the init_cea_offsets() function when KASLR is enabled. However, despite this feature, there is still a risk of per-cpu entry area leaks. This issue could allow a local user to gain access to some important data with memory in an expected location and potentially escalate their privileges on the system. |
| CVE-2023-3611 | An out-of-bounds write vulnerability in the Linux kernel's net/sched: sch_qfq component can be exploited to achieve local privilege escalation. The qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks. We recommend upgrading past commit 3e337087c3b5805fe0b8a46ba622a962880b5d64. |
| CVE-2023-3610 | A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. Flaw in the error handling of bound chains causes a use-after-free in the abort path of NFT_MSG_NEWRULE. The vulnerability requires CAP_NET_ADMIN to be triggered. We recommend upgrading past commit 4bedf9eee016286c835e3d8fa981ddece5338795. |
| CVE-2023-3609 | A use-after-free vulnerability in the Linux kernel's net/sched: cls_u32 component can be exploited to achieve local privilege escalation. If tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability. We recommend upgrading past commit 04c55383fa5689357bcdd2c8036725a55ed632bc. |
| CVE-2023-35829 | An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in rkvdec_remove in drivers/staging/media/rkvdec/rkvdec.c. |
| CVE-2023-35828 | An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in renesas_usb3_remove in drivers/usb/gadget/udc/renesas_usb3.c. |
| CVE-2023-35827 | An issue was discovered in the Linux kernel through 6.3.8. A use-after-free was found in ravb_remove in drivers/net/ethernet/renesas/ravb_main.c. |
| CVE-2023-35826 | An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in cedrus_remove in drivers/staging/media/sunxi/cedrus/cedrus.c. |
| CVE-2023-35824 | An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in dm1105_remove in drivers/media/pci/dm1105/dm1105.c. |
| CVE-2023-35823 | An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in saa7134_finidev in drivers/media/pci/saa7134/saa7134-core.c. |
| CVE-2023-35788 | An issue was discovered in fl_set_geneve_opt in net/sched/cls_flower.c in the Linux kernel before 6.3.7. It allows an out-of-bounds write in the flower classifier code via TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets. This may result in denial of service or privilege escalation. |
| CVE-2023-3567 | A use-after-free flaw was found in vcs_read in drivers/tty/vt/vc_screen.c in vc_screen in the Linux Kernel. This issue may allow an attacker with local user access to cause a system crash or leak internal kernel information. |
| CVE-2023-35001 | Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace |
| CVE-2023-3439 | A flaw was found in the MCTP protocol in the Linux kernel. The function mctp_unregister() reclaims the device's relevant resource when a netcard detaches. However, a running routine may be unaware of this and cause the use-after-free of the mdev->addrs object, potentially leading to a denial of service. |
| CVE-2023-34324 | Closing of an event channel in the Linux kernel can result in a deadlock. This happens when the close is being performed in parallel to an unrelated Xen console action and the handling of a Xen console interrupt in an unprivileged guest. The closing of an event channel is e.g. triggered by removal of a paravirtual device on the other side. As this action will cause console messages to be issued on the other side quite often, the chance of triggering the deadlock is not neglectable. Note that 32-bit Arm-guests are not affected, as the 32-bit Linux kernel on Arm doesn't use queued-RW-locks, which are required to trigger the issue (on Arm32 a waiting writer doesn't block further readers to get the lock). |
| CVE-2023-34256 | ** DISPUTED ** An issue was discovered in the Linux kernel before 6.3.3. There is an out-of-bounds read in crc16 in lib/crc16.c when called from fs/ext4/super.c because ext4_group_desc_csum does not properly check an offset. NOTE: this is disputed by third parties because the kernel is not intended to defend against attackers with the stated "When modifying the block device while it is mounted by the filesystem" access. |
| CVE-2023-3397 | A race condition occurred between the functions lmLogClose and txEnd in JFS, in the Linux Kernel, executed in different threads. This flaw allows a local attacker with normal user privileges to crash the system or leak internal kernel information. |
| CVE-2023-33952 | A double-free vulnerability was found in handling vmw_buffer_object objects in the vmwgfx driver in the Linux kernel. This issue occurs due to the lack of validating the existence of an object prior to performing further free operations on the object, which may allow a local privileged user to escalate privileges and execute code in the context of the kernel. |
| CVE-2023-33951 | A race condition vulnerability was found in the vmwgfx driver in the Linux kernel. The flaw exists within the handling of GEM objects. The issue results from improper locking when performing operations on an object. This flaw allows a local privileged user to disclose information in the context of the kernel. |
| CVE-2023-3390 | A use-after-free vulnerability was found in the Linux kernel's netfilter subsystem in net/netfilter/nf_tables_api.c. Mishandled error handling with NFT_MSG_NEWRULE makes it possible to use a dangling pointer in the same transaction causing a use-after-free vulnerability. This flaw allows a local attacker with user access to cause a privilege escalation issue. We recommend upgrading past commit 1240eb93f0616b21c675416516ff3d74798fdc97. |
| CVE-2023-3389 | A use-after-free vulnerability in the Linux Kernel io_uring subsystem can be exploited to achieve local privilege escalation. Racing a io_uring cancel poll request with a linked timeout can cause a UAF in a hrtimer. We recommend upgrading past commit ef7dfac51d8ed961b742218f526bd589f3900a59 (4716c73b188566865bdd79c3a6709696a224ac04 for 5.10 stable and 0e388fce7aec40992eadee654193cad345d62663 for 5.15 stable). |
| CVE-2023-3359 | An issue was discovered in the Linux kernel brcm_nvram_parse in drivers/nvmem/brcm_nvram.c. Lacks for the check of the return value of kzalloc() can cause the NULL Pointer Dereference. |
| CVE-2023-3358 | A null pointer dereference was found in the Linux kernel's Integrated Sensor Hub (ISH) driver. This issue could allow a local user to crash the system. |
| CVE-2023-3357 | A NULL pointer dereference flaw was found in the Linux kernel AMD Sensor Fusion Hub driver. This flaw allows a local user to crash the system. |
| CVE-2023-3355 | A NULL pointer dereference flaw was found in the Linux kernel's drivers/gpu/drm/msm/msm_gem_submit.c code in the submit_lookup_cmds function, which fails because it lacks a check of the return value of kmalloc(). This issue allows a local user to crash the system. |
| CVE-2023-3338 | A null pointer dereference flaw was found in the Linux kernel's DECnet networking protocol. This issue could allow a remote user to crash the system. |
| CVE-2023-33288 | An issue was discovered in the Linux kernel before 6.2.9. A use-after-free was found in bq24190_remove in drivers/power/supply/bq24190_charger.c. It could allow a local attacker to crash the system due to a race condition. |
| CVE-2023-33250 | The Linux kernel 6.3 has a use-after-free in iopt_unmap_iova_range in drivers/iommu/iommufd/io_pagetable.c. |
| CVE-2023-33203 | The Linux kernel before 6.2.9 has a race condition and resultant use-after-free in drivers/net/ethernet/qualcomm/emac/emac.c if a physically proximate attacker unplugs an emac based device. |
| CVE-2023-3317 | A use-after-free flaw was found in mt7921_check_offload_capability in drivers/net/wireless/mediatek/mt76/mt7921/init.c in wifi mt76/mt7921 sub-component in the Linux Kernel. This flaw could allow an attacker to crash the system after 'features' memory release. This vulnerability could even lead to a kernel information leak problem. |
| CVE-2023-3312 | A vulnerability was found in drivers/cpufreq/qcom-cpufreq-hw.c in cpufreq subsystem in the Linux Kernel. This flaw, during device unbind will lead to double release problem leading to denial of service. |
| CVE-2023-3269 | A vulnerability exists in the memory management subsystem of the Linux kernel. The lock handling for accessing and updating virtual memory areas (VMAs) is incorrect, leading to use-after-free problems. This issue can be successfully exploited to execute arbitrary kernel code, escalate containers, and gain root privileges. |
| CVE-2023-3268 | An out of bounds (OOB) memory access flaw was found in the Linux kernel in relay_file_read_start_pos in kernel/relay.c in the relayfs. This flaw could allow a local attacker to crash the system or leak kernel internal information. |
| CVE-2023-32269 | An issue was discovered in the Linux kernel before 6.1.11. In net/netrom/af_netrom.c, there is a use-after-free because accept is also allowed for a successfully connected AF_NETROM socket. However, in order for an attacker to exploit this, the system must have netrom routing configured or the attacker must have the CAP_NET_ADMIN capability. |
| CVE-2023-32258 | A flaw was found in the Linux kernel's ksmbd, a high-performance in-kernel SMB server. The specific flaw exists within the processing of SMB2_LOGOFF and SMB2_CLOSE commands. The issue results from the lack of proper locking when performing operations on an object. An attacker can leverage this vulnerability to execute code in the context of the kernel. |
| CVE-2023-32257 | A flaw was found in the Linux kernel's ksmbd, a high-performance in-kernel SMB server. The specific flaw exists within the processing of SMB2_SESSION_SETUP and SMB2_LOGOFF commands. The issue results from the lack of proper locking when performing operations on an object. An attacker can leverage this vulnerability to execute code in the context of the kernel. |
| CVE-2023-32254 | A flaw was found in the Linux kernel's ksmbd, a high-performance in-kernel SMB server. The specific flaw exists within the processing of SMB2_TREE_DISCONNECT commands. The issue results from the lack of proper locking when performing operations on an object. An attacker can leverage this vulnerability to execute code in the context of the kernel. |
| CVE-2023-32252 | A flaw was found in the Linux kernel's ksmbd, a high-performance in-kernel SMB server. The specific flaw exists within the handling of SMB2_LOGOFF commands. The issue results from the lack of proper validation of a pointer prior to accessing it. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. |
| CVE-2023-32250 | A flaw was found in the Linux kernel's ksmbd, a high-performance in-kernel SMB server. The specific flaw exists within the processing of SMB2_SESSION_SETUP commands. The issue results from the lack of proper locking when performing operations on an object. An attacker can leverage this vulnerability to execute code in the context of the kernel. |
| CVE-2023-32248 | A flaw was found in the Linux kernel's ksmbd, a high-performance in-kernel SMB server. The specific flaw exists within the handling of SMB2_TREE_CONNECT and SMB2_QUERY_INFO commands. The issue results from the lack of proper validation of a pointer prior to accessing it. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. |
| CVE-2023-32247 | A flaw was found in the Linux kernel's ksmbd, a high-performance in-kernel SMB server. The specific flaw exists within the handling of SMB2_SESSION_SETUP commands. The issue results from the lack of control of resource consumption. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. |
| CVE-2023-32233 | In the Linux kernel through 6.3.1, a use-after-free in Netfilter nf_tables when processing batch requests can be abused to perform arbitrary read and write operations on kernel memory. Unprivileged local users can obtain root privileges. This occurs because anonymous sets are mishandled. |
| CVE-2023-3220 | An issue was discovered in the Linux kernel through 6.1-rc8. dpu_crtc_atomic_check in drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c lacks check of the return value of kzalloc() and will cause the NULL Pointer Dereference. |
| CVE-2023-3212 | A NULL pointer dereference issue was found in the gfs2 file system in the Linux kernel. It occurs on corrupt gfs2 file systems when the evict code tries to reference the journal descriptor structure after it has been freed and set to NULL. A privileged local user could use this flaw to cause a kernel panic. |
| CVE-2023-3161 | A flaw was found in the Framebuffer Console (fbcon) in the Linux Kernel. When providing font->width and font->height greater than 32 to fbcon_set_font, since there are no checks in place, a shift-out-of-bounds occurs leading to undefined behavior and possible denial of service. |
| CVE-2023-3159 | A use after free issue was discovered in driver/firewire in outbound_phy_packet_callback in the Linux Kernel. In this flaw a local attacker with special privilege may cause a use after free problem when queue_event() fails. |
| CVE-2023-31436 | qfq_change_class in net/sched/sch_qfq.c in the Linux kernel before 6.2.13 allows an out-of-bounds write because lmax can exceed QFQ_MIN_LMAX. |
| CVE-2023-3141 | A use-after-free flaw was found in r592_remove in drivers/memstick/host/r592.c in media access in the Linux Kernel. This flaw allows a local attacker to crash the system at device disconnect, possibly leading to a kernel information leak. |
| CVE-2023-31248 | Linux Kernel nftables Use-After-Free Local Privilege Escalation Vulnerability; `nft_chain_lookup_byid()` failed to check whether a chain was active and CAP_NET_ADMIN is in any user or network namespace |
| CVE-2023-3111 | A use after free vulnerability was found in prepare_to_relocate in fs/btrfs/relocation.c in btrfs in the Linux Kernel. This possible flaw can be triggered by calling btrfs_ioctl_balance() before calling btrfs_ioctl_defrag(). |
| CVE-2023-31085 | An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd->erasesize), used indirectly by ctrl_cdev_ioctl, when mtd->erasesize is 0. |
| CVE-2023-31084 | An issue was discovered in drivers/media/dvb-core/dvb_frontend.c in the Linux kernel 6.2. There is a blocking operation when a task is in !TASK_RUNNING. In dvb_frontend_get_event, wait_event_interruptible is called; the condition is dvb_frontend_test_event(fepriv,events). In dvb_frontend_test_event, down(&fepriv->sem) is called. However, wait_event_interruptible would put the process to sleep, and down(&fepriv->sem) may block the process. |
| CVE-2023-31083 | An issue was discovered in drivers/bluetooth/hci_ldisc.c in the Linux kernel 6.2. In hci_uart_tty_ioctl, there is a race condition between HCIUARTSETPROTO and HCIUARTGETPROTO. HCI_UART_PROTO_SET is set before hu->proto is set. A NULL pointer dereference may occur. |
| CVE-2023-31082 | ** DISPUTED ** An issue was discovered in drivers/tty/n_gsm.c in the Linux kernel 6.2. There is a sleeping function called from an invalid context in gsmld_write, which will block the kernel. Note: This has been disputed by 3rd parties as not a valid vulnerability. |
| CVE-2023-31081 | An issue was discovered in drivers/media/test-drivers/vidtv/vidtv_bridge.c in the Linux kernel 6.2. There is a NULL pointer dereference in vidtv_mux_stop_thread. In vidtv_stop_streaming, after dvb->mux=NULL occurs, it executes vidtv_mux_stop_thread(dvb->mux). |
| CVE-2023-31022 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a NULL-pointer dereference may lead to denial of service. |
| CVE-2023-31018 | NVIDIA GPU Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where an unprivileged regular user can cause a NULL-pointer dereference, which may lead to denial of service. |
| CVE-2023-3090 | A heap out-of-bounds write vulnerability in the Linux Kernel ipvlan network driver can be exploited to achieve local privilege escalation. The out-of-bounds write is caused by missing skb->cb initialization in the ipvlan network driver. The vulnerability is reachable if CONFIG_IPVLAN is enabled. We recommend upgrading past commit 90cbed5247439a966b645b34eb0a2e037836ea8e. |
| CVE-2023-30772 | The Linux kernel before 6.2.9 has a race condition and resultant use-after-free in drivers/power/supply/da9150-charger.c if a physically proximate attacker unplugs a device. |
| CVE-2023-30549 | Apptainer is an open source container platform for Linux. There is an ext4 use-after-free flaw that is exploitable through versions of Apptainer < 1.1.0 and installations that include apptainer-suid < 1.1.8 on older operating systems where that CVE has not been patched. That includes Red Hat Enterprise Linux 7, Debian 10 buster (unless the linux-5.10 package is installed), Ubuntu 18.04 bionic and Ubuntu 20.04 focal. Use-after-free flaws in the kernel can be used to attack the kernel for denial of service and potentially for privilege escalation. Apptainer 1.1.8 includes a patch that by default disables mounting of extfs filesystem types in setuid-root mode, while continuing to allow mounting of extfs filesystems in non-setuid "rootless" mode using fuse2fs. Some workarounds are possible. Either do not install apptainer-suid (for versions 1.1.0 through 1.1.7) or set `allow setuid = no` in apptainer.conf. This requires having unprivileged user namespaces enabled and except for apptainer 1.1.x versions will disallow mounting of sif files, extfs files, and squashfs files in addition to other, less significant impacts. (Encrypted sif files are also not supported unprivileged in apptainer 1.1.x.). Alternatively, use the `limit containers` options in apptainer.conf/singularity.conf to limit sif files to trusted users, groups, and/or paths, and set `allow container extfs = no` to disallow mounting of extfs overlay files. The latter option by itself does not disallow mounting of extfs overlay partitions inside SIF files, so that's why the former options are also needed. |
| CVE-2023-30456 | An issue was discovered in arch/x86/kvm/vmx/nested.c in the Linux kernel before 6.2.8. nVMX on x86_64 lacks consistency checks for CR0 and CR4. |
| CVE-2023-3022 | A flaw was found in the IPv6 module of the Linux kernel. The arg.result was not used consistently in fib6_rule_lookup, sometimes holding rt6_info and other times fib6_info. This was not accounted for in other parts of the code where rt6_info was expected unconditionally, potentially leading to a kernel panic in fib6_rule_suppress. |
| CVE-2023-3006 | A known cache speculation vulnerability, known as Branch History Injection (BHI) or Spectre-BHB, becomes actual again for the new hw AmpereOne. Spectre-BHB is similar to Spectre v2, except that malicious code uses the shared branch history (stored in the CPU Branch History Buffer, or BHB) to influence mispredicted branches within the victim's hardware context. Once that occurs, speculation caused by the mispredicted branches can cause cache allocation. This issue leads to obtaining information that should not be accessible. |
| CVE-2023-2985 | A use after free flaw was found in hfsplus_put_super in fs/hfsplus/super.c in the Linux Kernel. This flaw could allow a local user to cause a denial of service problem. |
| CVE-2023-2898 | There is a null-pointer-dereference flaw found in f2fs_write_end_io in fs/f2fs/data.c in the Linux kernel. This flaw allows a local privileged user to cause a denial of service problem. |
| CVE-2023-28866 | In the Linux kernel through 6.2.8, net/bluetooth/hci_sync.c allows out-of-bounds access because amp_init1[] and amp_init2[] are supposed to have an intentionally invalid element, but do not. |
| CVE-2023-28842 | Moby) is an open source container framework developed by Docker Inc. that is distributed as Docker, Mirantis Container Runtime, and various other downstream projects/products. The Moby daemon component (`dockerd`), which is developed as moby/moby is commonly referred to as *Docker*. Swarm Mode, which is compiled in and delivered by default in `dockerd` and is thus present in most major Moby downstreams, is a simple, built-in container orchestrator that is implemented through a combination of SwarmKit and supporting network code. The `overlay` network driver is a core feature of Swarm Mode, providing isolated virtual LANs that allow communication between containers and services across the cluster. This driver is an implementation/user of VXLAN, which encapsulates link-layer (Ethernet) frames in UDP datagrams that tag the frame with the VXLAN metadata, including a VXLAN Network ID (VNI) that identifies the originating overlay network. In addition, the overlay network driver supports an optional, off-by-default encrypted mode, which is especially useful when VXLAN packets traverses an untrusted network between nodes. Encrypted overlay networks function by encapsulating the VXLAN datagrams through the use of the IPsec Encapsulating Security Payload protocol in Transport mode. By deploying IPSec encapsulation, encrypted overlay networks gain the additional properties of source authentication through cryptographic proof, data integrity through check-summing, and confidentiality through encryption. When setting an endpoint up on an encrypted overlay network, Moby installs three iptables (Linux kernel firewall) rules that enforce both incoming and outgoing IPSec. These rules rely on the `u32` iptables extension provided by the `xt_u32` kernel module to directly filter on a VXLAN packet's VNI field, so that IPSec guarantees can be enforced on encrypted overlay networks without interfering with other overlay networks or other users of VXLAN. The `overlay` driver dynamically and lazily defines the kernel configuration for the VXLAN network on each node as containers are attached and detached. Routes and encryption parameters are only defined for destination nodes that participate in the network. The iptables rules that prevent encrypted overlay networks from accepting unencrypted packets are not created until a peer is available with which to communicate. Encrypted overlay networks silently accept cleartext VXLAN datagrams that are tagged with the VNI of an encrypted overlay network. As a result, it is possible to inject arbitrary Ethernet frames into the encrypted overlay network by encapsulating them in VXLAN datagrams. The implications of this can be quite dire, and GHSA-vwm3-crmr-xfxw should be referenced for a deeper exploration. Patches are available in Moby releases 23.0.3, and 20.10.24. As Mirantis Container Runtime's 20.10 releases are numbered differently, users of that platform should update to 20.10.16. Some workarounds are available. In multi-node clusters, deploy a global ‘pause’ container for each encrypted overlay network, on every node. For a single-node cluster, do not use overlay networks of any sort. Bridge networks provide the same connectivity on a single node and have no multi-node features. The Swarm ingress feature is implemented using an overlay network, but can be disabled by publishing ports in `host` mode instead of `ingress` mode (allowing the use of an external load balancer), and removing the `ingress` network. If encrypted overlay networks are in exclusive use, block UDP port 4789 from traffic that has not been validated by IPSec. |
| CVE-2023-28841 | Moby is an open source container framework developed by Docker Inc. that is distributed as Docker, Mirantis Container Runtime, and various other downstream projects/products. The Moby daemon component (`dockerd`), which is developed as moby/moby is commonly referred to as *Docker*. Swarm Mode, which is compiled in and delivered by default in `dockerd` and is thus present in most major Moby downstreams, is a simple, built-in container orchestrator that is implemented through a combination of SwarmKit and supporting network code. The `overlay` network driver is a core feature of Swarm Mode, providing isolated virtual LANs that allow communication between containers and services across the cluster. This driver is an implementation/user of VXLAN, which encapsulates link-layer (Ethernet) frames in UDP datagrams that tag the frame with the VXLAN metadata, including a VXLAN Network ID (VNI) that identifies the originating overlay network. In addition, the overlay network driver supports an optional, off-by-default encrypted mode, which is especially useful when VXLAN packets traverses an untrusted network between nodes. Encrypted overlay networks function by encapsulating the VXLAN datagrams through the use of the IPsec Encapsulating Security Payload protocol in Transport mode. By deploying IPSec encapsulation, encrypted overlay networks gain the additional properties of source authentication through cryptographic proof, data integrity through check-summing, and confidentiality through encryption. When setting an endpoint up on an encrypted overlay network, Moby installs three iptables (Linux kernel firewall) rules that enforce both incoming and outgoing IPSec. These rules rely on the `u32` iptables extension provided by the `xt_u32` kernel module to directly filter on a VXLAN packet's VNI field, so that IPSec guarantees can be enforced on encrypted overlay networks without interfering with other overlay networks or other users of VXLAN. An iptables rule designates outgoing VXLAN datagrams with a VNI that corresponds to an encrypted overlay network for IPsec encapsulation. Encrypted overlay networks on affected platforms silently transmit unencrypted data. As a result, `overlay` networks may appear to be functional, passing traffic as expected, but without any of the expected confidentiality or data integrity guarantees. It is possible for an attacker sitting in a trusted position on the network to read all of the application traffic that is moving across the overlay network, resulting in unexpected secrets or user data disclosure. Thus, because many database protocols, internal APIs, etc. are not protected by a second layer of encryption, a user may use Swarm encrypted overlay networks to provide confidentiality, which due to this vulnerability this is no longer guaranteed. Patches are available in Moby releases 23.0.3, and 20.10.24. As Mirantis Container Runtime's 20.10 releases are numbered differently, users of that platform should update to 20.10.16. Some workarounds are available. Close the VXLAN port (by default, UDP port 4789) to outgoing traffic at the Internet boundary in order to prevent unintentionally leaking unencrypted traffic over the Internet, and/or ensure that the `xt_u32` kernel module is available on all nodes of the Swarm cluster. |
| CVE-2023-28840 | Moby is an open source container framework developed by Docker Inc. that is distributed as Docker, Mirantis Container Runtime, and various other downstream projects/products. The Moby daemon component (`dockerd`), which is developed as moby/moby, is commonly referred to as *Docker*. Swarm Mode, which is compiled in and delivered by default in dockerd and is thus present in most major Moby downstreams, is a simple, built-in container orchestrator that is implemented through a combination of SwarmKit and supporting network code. The overlay network driver is a core feature of Swarm Mode, providing isolated virtual LANs that allow communication between containers and services across the cluster. This driver is an implementation/user of VXLAN, which encapsulates link-layer (Ethernet) frames in UDP datagrams that tag the frame with a VXLAN Network ID (VNI) that identifies the originating overlay network. In addition, the overlay network driver supports an optional, off-by-default encrypted mode, which is especially useful when VXLAN packets traverses an untrusted network between nodes. Encrypted overlay networks function by encapsulating the VXLAN datagrams through the use of the IPsec Encapsulating Security Payload protocol in Transport mode. By deploying IPSec encapsulation, encrypted overlay networks gain the additional properties of source authentication through cryptographic proof, data integrity through check-summing, and confidentiality through encryption. When setting an endpoint up on an encrypted overlay network, Moby installs three iptables (Linux kernel firewall) rules that enforce both incoming and outgoing IPSec. These rules rely on the u32 iptables extension provided by the xt_u32 kernel module to directly filter on a VXLAN packet's VNI field, so that IPSec guarantees can be enforced on encrypted overlay networks without interfering with other overlay networks or other users of VXLAN. Two iptables rules serve to filter incoming VXLAN datagrams with a VNI that corresponds to an encrypted network and discards unencrypted datagrams. The rules are appended to the end of the INPUT filter chain, following any rules that have been previously set by the system administrator. Administrator-set rules take precedence over the rules Moby sets to discard unencrypted VXLAN datagrams, which can potentially admit unencrypted datagrams that should have been discarded. The injection of arbitrary Ethernet frames can enable a Denial of Service attack. A sophisticated attacker may be able to establish a UDP or TCP connection by way of the container’s outbound gateway that would otherwise be blocked by a stateful firewall, or carry out other escalations beyond simple injection by smuggling packets into the overlay network. Patches are available in Moby releases 23.0.3 and 20.10.24. As Mirantis Container Runtime's 20.10 releases are numbered differently, users of that platform should update to 20.10.16. Some workarounds are available. Close the VXLAN port (by default, UDP port 4789) to incoming traffic at the Internet boundary to prevent all VXLAN packet injection, and/or ensure that the `xt_u32` kernel module is available on all nodes of the Swarm cluster. |
| CVE-2023-28772 | An issue was discovered in the Linux kernel before 5.13.3. lib/seq_buf.c has a seq_buf_putmem_hex buffer overflow. |
| CVE-2023-2860 | An out-of-bounds read vulnerability was found in the SR-IPv6 implementation in the Linux kernel. The flaw exists within the processing of seg6 attributes. The issue results from the improper validation of user-supplied data, which can result in a read past the end of an allocated buffer. This flaw allows a privileged local user to disclose sensitive information on affected installations of the Linux kernel. |
| CVE-2023-28466 | do_tls_getsockopt in net/tls/tls_main.c in the Linux kernel through 6.2.6 lacks a lock_sock call, leading to a race condition (with a resultant use-after-free or NULL pointer dereference). |
| CVE-2023-28464 | hci_conn_cleanup in net/bluetooth/hci_conn.c in the Linux kernel through 6.2.9 has a use-after-free (observed in hci_conn_hash_flush) because of calls to hci_dev_put and hci_conn_put. There is a double free that may lead to privilege escalation. |
| CVE-2023-28410 | Improper restriction of operations within the bounds of a memory buffer in some Intel(R) i915 Graphics drivers for linux before kernel version 6.2.10 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| CVE-2023-28339 | OpenDoas through 6.8.2, when TIOCSTI is available, allows privilege escalation because of sharing a terminal with the original session. NOTE: TIOCSTI is unavailable in OpenBSD 6.0 and later, and can be made unavailable in the Linux kernel 6.2 and later. |
| CVE-2023-28328 | A NULL pointer dereference flaw was found in the az6027 driver in drivers/media/usb/dev-usb/az6027.c in the Linux Kernel. The message from user space is not checked properly before transferring into the device. This flaw allows a local user to crash the system or potentially cause a denial of service. |
| CVE-2023-28327 | A NULL pointer dereference flaw was found in the UNIX protocol in net/unix/diag.c In unix_diag_get_exact in the Linux Kernel. The newly allocated skb does not have sk, leading to a NULL pointer. This flaw allows a local user to crash or potentially cause a denial of service. |
| CVE-2023-26607 | In the Linux kernel 6.0.8, there is an out-of-bounds read in ntfs_attr_find in fs/ntfs/attrib.c. |
| CVE-2023-26606 | In the Linux kernel 6.0.8, there is a use-after-free in ntfs_trim_fs in fs/ntfs3/bitmap.c. |
| CVE-2023-26605 | In the Linux kernel 6.0.8, there is a use-after-free in inode_cgwb_move_to_attached in fs/fs-writeback.c, related to __list_del_entry_valid. |
| CVE-2023-26545 | In the Linux kernel before 6.1.13, there is a double free in net/mpls/af_mpls.c upon an allocation failure (for registering the sysctl table under a new location) during the renaming of a device. |
| CVE-2023-26544 | In the Linux kernel 6.0.8, there is a use-after-free in run_unpack in fs/ntfs3/run.c, related to a difference between NTFS sector size and media sector size. |
| CVE-2023-26242 | afu_mmio_region_get_by_offset in drivers/fpga/dfl-afu-region.c in the Linux kernel through 6.1.12 has an integer overflow. |
| CVE-2023-2612 | Jean-Baptiste Cayrou discovered that the shiftfs file system in the Ubuntu Linux kernel contained a race condition when handling inode locking in some situations. A local attacker could use this to cause a denial of service (kernel deadlock). |
| CVE-2023-2598 | A flaw was found in the fixed buffer registration code for io_uring (io_sqe_buffer_register in io_uring/rsrc.c) in the Linux kernel that allows out-of-bounds access to physical memory beyond the end of the buffer. This flaw enables full local privilege escalation. |
| CVE-2023-25516 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer, where an unprivileged user can cause an integer overflow, which may lead to information disclosure and denial of service. |
| CVE-2023-2513 | A use-after-free vulnerability was found in the Linux kernel's ext4 filesystem in the way it handled the extra inode size for extended attributes. This flaw could allow a privileged local user to cause a system crash or other undefined behaviors. |
| CVE-2023-25012 | The Linux kernel through 6.1.9 has a Use-After-Free in bigben_remove in drivers/hid/hid-bigbenff.c via a crafted USB device because the LED controllers remain registered for too long. |
| CVE-2023-2430 | A vulnerability was found due to missing lock for IOPOLL flaw in io_cqring_event_overflow() in io_uring.c in Linux Kernel. This flaw allows a local attacker with user privilege to trigger a Denial of Service threat. |
| CVE-2023-23586 | Due to a vulnerability in the io_uring subsystem, it is possible to leak kernel memory information to the user process. timens_install calls current_is_single_threaded to determine if the current process is single-threaded, but this call does not consider io_uring's io_worker threads, thus it is possible to insert a time namespace's vvar page to process's memory space via a page fault. When this time namespace is destroyed, the vvar page is also freed, but not removed from the process' memory, and a next page allocated by the kernel will be still available from the user-space process and can leak memory contents via this (read-only) use-after-free vulnerability. We recommend upgrading past version 5.10.161 or commit 788d0824269bef539fe31a785b1517882eafed93 https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/io_uring |
| CVE-2023-23559 | In rndis_query_oid in drivers/net/wireless/rndis_wlan.c in the Linux kernel through 6.1.5, there is an integer overflow in an addition. |
| CVE-2023-23455 | atm_tc_enqueue in net/sched/sch_atm.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results). |
| CVE-2023-23454 | cbq_classify in net/sched/sch_cbq.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service (slab-out-of-bounds read) because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results). |
| CVE-2023-23039 | An issue was discovered in the Linux kernel through 6.2.0-rc2. drivers/tty/vcc.c has a race condition and resultant use-after-free if a physically proximate attacker removes a VCC device while calling open(), aka a race condition between vcc_open() and vcc_remove(). |
| CVE-2023-23006 | In the Linux kernel before 5.15.13, drivers/net/ethernet/mellanox/mlx5/core/steering/dr_domain.c misinterprets the mlx5_get_uars_page return value (expects it to be NULL in the error case, whereas it is actually an error pointer). |
| CVE-2023-23005 | ** DISPUTED ** In the Linux kernel before 6.2, mm/memory-tiers.c misinterprets the alloc_memory_type return value (expects it to be NULL in the error case, whereas it is actually an error pointer). NOTE: this is disputed by third parties because there are no realistic cases in which a user can cause the alloc_memory_type error case to be reached. |
| CVE-2023-23004 | In the Linux kernel before 5.19, drivers/gpu/drm/arm/malidp_planes.c misinterprets the get_sg_table return value (expects it to be NULL in the error case, whereas it is actually an error pointer). |
| CVE-2023-23003 | In the Linux kernel before 5.16, tools/perf/util/expr.c lacks a check for the hashmap__new return value. |
| CVE-2023-23002 | In the Linux kernel before 5.16.3, drivers/bluetooth/hci_qca.c misinterprets the devm_gpiod_get_index_optional return value (expects it to be NULL in the error case, whereas it is actually an error pointer). |
| CVE-2023-23001 | In the Linux kernel before 5.16.3, drivers/scsi/ufs/ufs-mediatek.c misinterprets the regulator_get return value (expects it to be NULL in the error case, whereas it is actually an error pointer). |
| CVE-2023-23000 | In the Linux kernel before 5.17, drivers/phy/tegra/xusb.c mishandles the tegra_xusb_find_port_node return value. Callers expect NULL in the error case, but an error pointer is used. |
| CVE-2023-22999 | In the Linux kernel before 5.16.3, drivers/usb/dwc3/dwc3-qcom.c misinterprets the dwc3_qcom_create_urs_usb_platdev return value (expects it to be NULL in the error case, whereas it is actually an error pointer). |
| CVE-2023-22998 | In the Linux kernel before 6.0.3, drivers/gpu/drm/virtio/virtgpu_object.c misinterprets the drm_gem_shmem_get_sg_table return value (expects it to be NULL in the error case, whereas it is actually an error pointer). |
| CVE-2023-22997 | In the Linux kernel before 6.1.2, kernel/module/decompress.c misinterprets the module_get_next_page return value (expects it to be NULL in the error case, whereas it is actually an error pointer). |
| CVE-2023-22996 | In the Linux kernel before 5.17.2, drivers/soc/qcom/qcom_aoss.c does not release an of_find_device_by_node reference after use, e.g., with put_device. |
| CVE-2023-22995 | In the Linux kernel before 5.17, an error path in dwc3_qcom_acpi_register_core in drivers/usb/dwc3/dwc3-qcom.c lacks certain platform_device_put and kfree calls. |
| CVE-2023-2269 | A denial of service problem was found, due to a possible recursive locking scenario, resulting in a deadlock in table_clear in drivers/md/dm-ioctl.c in the Linux Kernel Device Mapper-Multipathing sub-component. |
| CVE-2023-2236 | A use-after-free vulnerability in the Linux Kernel io_uring subsystem can be exploited to achieve local privilege escalation. Both io_install_fixed_file and its callers call fput in a file in case of an error, causing a reference underflow which leads to a use-after-free vulnerability. We recommend upgrading past commit 9d94c04c0db024922e886c9fd429659f22f48ea4. |
| CVE-2023-2235 | A use-after-free vulnerability in the Linux Kernel Performance Events system can be exploited to achieve local privilege escalation. The perf_group_detach function did not check the event's siblings' attach_state before calling add_event_to_groups(), but remove_on_exec made it possible to call list_del_event() on before detaching from their group, making it possible to use a dangling pointer causing a use-after-free vulnerability. We recommend upgrading past commit fd0815f632c24878e325821943edccc7fde947a2. |
| CVE-2023-2194 | An out-of-bounds write vulnerability was found in the Linux kernel's SLIMpro I2C device driver. The userspace "data->block[0]" variable was not capped to a number between 0-255 and was used as the size of a memcpy, possibly writing beyond the end of dma_buffer. This flaw could allow a local privileged user to crash the system or potentially achieve code execution. |
| CVE-2023-2177 | A null pointer dereference issue was found in the sctp network protocol in net/sctp/stream_sched.c in Linux Kernel. If stream_in allocation is failed, stream_out is freed which would further be accessed. A local user could use this flaw to crash the system or potentially cause a denial of service. |
| CVE-2023-2176 | A vulnerability was found in compare_netdev_and_ip in drivers/infiniband/core/cma.c in RDMA in the Linux Kernel. The improper cleanup results in out-of-boundary read, where a local user can utilize this problem to crash the system or escalation of privilege. |
| CVE-2023-2163 | Incorrect verifier pruning in BPF in Linux Kernel >=5.4 leads to unsafe code paths being incorrectly marked as safe, resulting in arbitrary read/write in kernel memory, lateral privilege escalation, and container escape. |
| CVE-2023-2162 | A use-after-free vulnerability was found in iscsi_sw_tcp_session_create in drivers/scsi/iscsi_tcp.c in SCSI sub-component in the Linux Kernel. In this flaw an attacker could leak kernel internal information. |
| CVE-2023-2156 | A flaw was found in the networking subsystem of the Linux kernel within the handling of the RPL protocol. This issue results from the lack of proper handling of user-supplied data, which can lead to an assertion failure. This may allow an unauthenticated remote attacker to create a denial of service condition on the system. |
| CVE-2023-21400 | In multiple functions of io_uring.c, there is a possible kernel memory corruption due to improper locking. This could lead to local escalation of privilege in the kernel with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2023-2124 | An out-of-bounds memory access flaw was found in the Linux kernel’s XFS file system in how a user restores an XFS image after failure (with a dirty log journal). This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| CVE-2023-20937 | In several functions of the Android Linux kernel, there is a possible way to corrupt memory due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-257443051References: Upstream kernel |
| CVE-2023-2019 | A flaw was found in the Linux kernel's netdevsim device driver, within the scheduling of events. This issue results from the improper management of a reference count. This may allow an attacker to create a denial of service condition on the system. |
| CVE-2023-2008 | A flaw was found in the Linux kernel's udmabuf device driver. The specific flaw exists within a fault handler. The issue results from the lack of proper validation of user-supplied data, which can result in a memory access past the end of an array. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the kernel. |
| CVE-2023-2007 | The specific flaw exists within the DPT I2O Controller driver. The issue results from the lack of proper locking when performing operations on an object. An attacker can leverage this in conjunction with other vulnerabilities to escalate privileges and execute arbitrary code in the context of the kernel. |
| CVE-2023-2006 | A race condition was found in the Linux kernel's RxRPC network protocol, within the processing of RxRPC bundles. This issue results from the lack of proper locking when performing operations on an object. This may allow an attacker to escalate privileges and execute arbitrary code in the context of the kernel. |
| CVE-2023-2002 | A vulnerability was found in the HCI sockets implementation due to a missing capability check in net/bluetooth/hci_sock.c in the Linux Kernel. This flaw allows an attacker to unauthorized execution of management commands, compromising the confidentiality, integrity, and availability of Bluetooth communication. |
| CVE-2023-1998 | The Linux kernel allows userspace processes to enable mitigations by calling prctl with PR_SET_SPECULATION_CTRL which disables the speculation feature as well as by using seccomp. We had noticed that on VMs of at least one major cloud provider, the kernel still left the victim process exposed to attacks in some cases even after enabling the spectre-BTI mitigation with prctl. The same behavior can be observed on a bare-metal machine when forcing the mitigation to IBRS on boot command line. This happened because when plain IBRS was enabled (not enhanced IBRS), the kernel had some logic that determined that STIBP was not needed. The IBRS bit implicitly protects against cross-thread branch target injection. However, with legacy IBRS, the IBRS bit was cleared on returning to userspace, due to performance reasons, which disabled the implicit STIBP and left userspace threads vulnerable to cross-thread branch target injection against which STIBP protects. |
| CVE-2023-1990 | A use-after-free flaw was found in ndlc_remove in drivers/nfc/st-nci/ndlc.c in the Linux Kernel. This flaw could allow an attacker to crash the system due to a race problem. |
| CVE-2023-1989 | A use-after-free flaw was found in btsdio_remove in drivers\bluetooth\btsdio.c in the Linux Kernel. In this flaw, a call to btsdio_remove with an unfinished job, may cause a race problem leading to a UAF on hdev devices. |
| CVE-2023-1872 | A use-after-free vulnerability in the Linux Kernel io_uring system can be exploited to achieve local privilege escalation. The io_file_get_fixed function lacks the presence of ctx->uring_lock which can lead to a Use-After-Free vulnerability due a race condition with fixed files getting unregistered. We recommend upgrading past commit da24142b1ef9fd5d36b76e36bab328a5b27523e8. |
| CVE-2023-1859 | A use-after-free flaw was found in xen_9pfs_front_removet in net/9p/trans_xen.c in Xen transport for 9pfs in the Linux Kernel. This flaw could allow a local attacker to crash the system due to a race problem, possibly leading to a kernel information leak. |
| CVE-2023-1855 | A use-after-free flaw was found in xgene_hwmon_remove in drivers/hwmon/xgene-hwmon.c in the Hardware Monitoring Linux Kernel Driver (xgene-hwmon). This flaw could allow a local attacker to crash the system due to a race problem. This vulnerability could even lead to a kernel information leak problem. |
| CVE-2023-1838 | A use-after-free flaw was found in vhost_net_set_backend in drivers/vhost/net.c in virtio network subcomponent in the Linux kernel due to a double fget. This flaw could allow a local attacker to crash the system, and could even lead to a kernel information leak problem. |
| CVE-2023-1829 | A use-after-free vulnerability in the Linux Kernel traffic control index filter (tcindex) can be exploited to achieve local privilege escalation. The tcindex_delete function which does not properly deactivate filters in case of a perfect hashes while deleting the underlying structure which can later lead to double freeing the structure. A local attacker user can use this vulnerability to elevate its privileges to root. We recommend upgrading past commit 8c710f75256bb3cf05ac7b1672c82b92c43f3d28. |
| CVE-2023-1670 | A flaw use after free in the Linux kernel Xircom 16-bit PCMCIA (PC-card) Ethernet driver was found.A local user could use this flaw to crash the system or potentially escalate their privileges on the system. |
| CVE-2023-1652 | A use-after-free flaw was found in nfsd4_ssc_setup_dul in fs/nfsd/nfs4proc.c in the NFS filesystem in the Linux Kernel. This issue could allow a local attacker to crash the system or it may lead to a kernel information leak problem. |
| CVE-2023-1637 | A flaw that boot CPU could be vulnerable for the speculative execution behavior kind of attacks in the Linux kernel X86 CPU Power management options functionality was found in the way user resuming CPU from suspend-to-RAM. A local user could use this flaw to potentially get unauthorized access to some memory of the CPU similar to the speculative execution behavior kind of attacks. |
| CVE-2023-1611 | A use-after-free flaw was found in btrfs_search_slot in fs/btrfs/ctree.c in btrfs in the Linux Kernel.This flaw allows an attacker to crash the system and possibly cause a kernel information lea |
| CVE-2023-1583 | A NULL pointer dereference was found in io_file_bitmap_get in io_uring/filetable.c in the io_uring sub-component in the Linux Kernel. When fixed files are unregistered, some context information (file_alloc_{start,end} and alloc_hint) is not cleared. A subsequent request that has auto index selection enabled via IORING_FILE_INDEX_ALLOC can cause a NULL pointer dereference. An unprivileged user can use the flaw to cause a system crash. |
| CVE-2023-1582 | A race problem was found in fs/proc/task_mmu.c in the memory management sub-component in the Linux kernel. This issue may allow a local attacker with user privilege to cause a denial of service. |
| CVE-2023-1476 | A use-after-free flaw was found in the Linux kernel’s mm/mremap memory address space accounting source code. This issue occurs due to a race condition between rmap walk and mremap, allowing a local user to crash the system or potentially escalate their privileges on the system. |
| CVE-2023-1390 | A remote denial of service vulnerability was found in the Linux kernel’s TIPC kernel module. The while loop in tipc_link_xmit() hits an unknown state while attempting to parse SKBs, which are not in the queue. Sending two small UDP packets to a system with a UDP bearer results in the CPU utilization for the system to instantly spike to 100%, causing a denial of service condition. |
| CVE-2023-1382 | A data race flaw was found in the Linux kernel, between where con is allocated and con->sock is set. This issue leads to a NULL pointer dereference when accessing con->sock->sk in net/tipc/topsrv.c in the tipc protocol in the Linux kernel. |
| CVE-2023-1380 | A slab-out-of-bound read problem was found in brcmf_get_assoc_ies in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c in the Linux Kernel. This issue could occur when assoc_info->req_len data is bigger than the size of the buffer, defined as WL_EXTRA_BUF_MAX, leading to a denial of service. |
| CVE-2023-1295 | A time-of-check to time-of-use issue exists in io_uring subsystem's IORING_OP_CLOSE operation in the Linux kernel's versions 5.6 - 5.11 (inclusive), which allows a local user to elevate their privileges to root. Introduced in b5dba59e0cf7e2cc4d3b3b1ac5fe81ddf21959eb, patched in 9eac1904d3364254d622bf2c771c4f85cd435fc2, backported to stable in 788d0824269bef539fe31a785b1517882eafed93. |
| CVE-2023-1281 | Use After Free vulnerability in Linux kernel traffic control index filter (tcindex) allows Privilege Escalation. The imperfect hash area can be updated while packets are traversing, which will cause a use-after-free when 'tcf_exts_exec()' is called with the destroyed tcf_ext. A local attacker user can use this vulnerability to elevate its privileges to root. This issue affects Linux Kernel: from 4.14 before git commit ee059170b1f7e94e55fa6cadee544e176a6e59c2. |
| CVE-2023-1252 | A use-after-free flaw was found in the Linux kernel’s Ext4 File System in how a user triggers several file operations simultaneously with the overlay FS usage. This flaw allows a local user to crash or potentially escalate their privileges on the system. Only if patch 9a2544037600 ("ovl: fix use after free in struct ovl_aio_req") not applied yet, the kernel could be affected. |
| CVE-2023-1249 | A use-after-free flaw was found in the Linux kernel’s core dump subsystem. This flaw allows a local user to crash the system. Only if patch 390031c94211 ("coredump: Use the vma snapshot in fill_files_note") not applied yet, then kernel could be affected. |
| CVE-2023-1195 | A use-after-free flaw was found in reconn_set_ipaddr_from_hostname in fs/cifs/connect.c in the Linux kernel. The issue occurs when it forgets to set the free pointer server->hostname to NULL, leading to an invalid pointer request. |
| CVE-2023-1194 | An out-of-bounds (OOB) memory read flaw was found in parse_lease_state in the KSMBD implementation of the in-kernel samba server and CIFS in the Linux kernel. When an attacker sends the CREATE command with a malformed payload to KSMBD, due to a missing check of `NameOffset` in the `parse_lease_state()` function, the `create_context` object can access invalid memory. |
| CVE-2023-1193 | A use-after-free flaw was found in setup_async_work in the KSMBD implementation of the in-kernel samba server and CIFS in the Linux kernel. This issue could allow an attacker to crash the system by accessing freed work. |
| CVE-2023-1192 | A use-after-free flaw was found in smb2_is_status_io_timeout() in CIFS in the Linux Kernel. After CIFS transfers response data to a system call, there are still local variable points to the memory region, and if the system call frees it faster than CIFS uses it, CIFS will access a free memory region, leading to a denial of service. |
| CVE-2023-1118 | A flaw use after free in the Linux kernel integrated infrared receiver/transceiver driver was found in the way user detaching rc device. A local user could use this flaw to crash the system or potentially escalate their privileges on the system. |
| CVE-2023-1079 | A flaw was found in the Linux kernel. A use-after-free may be triggered in asus_kbd_backlight_set when plugging/disconnecting in a malicious USB device, which advertises itself as an Asus device. Similarly to the previous known CVE-2023-25012, but in asus devices, the work_struct may be scheduled by the LED controller while the device is disconnecting, triggering a use-after-free on the struct asus_kbd_leds *led structure. A malicious USB device may exploit the issue to cause memory corruption with controlled data. |
| CVE-2023-1078 | A flaw was found in the Linux Kernel in RDS (Reliable Datagram Sockets) protocol. The rds_rm_zerocopy_callback() uses list_entry() on the head of a list causing a type confusion. Local user can trigger this with rds_message_put(). Type confusion leads to `struct rds_msg_zcopy_info *info` actually points to something else that is potentially controlled by local user. It is known how to trigger this, which causes an out of bounds access, and a lock corruption. |
| CVE-2023-1077 | In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption. |
| CVE-2023-1076 | A flaw was found in the Linux Kernel. The tun/tap sockets have their socket UID hardcoded to 0 due to a type confusion in their initialization function. While it will be often correct, as tuntap devices require CAP_NET_ADMIN, it may not always be the case, e.g., a non-root user only having that capability. This would make tun/tap sockets being incorrectly treated in filtering/routing decisions, possibly bypassing network filters. |
| CVE-2023-1075 | A flaw was found in the Linux Kernel. The tls_is_tx_ready() incorrectly checks for list emptiness, potentially accessing a type confused entry to the list_head, leaking the last byte of the confused field that overlaps with rec->tx_ready. |
| CVE-2023-1074 | A memory leak flaw was found in the Linux kernel's Stream Control Transmission Protocol. This issue may occur when a user starts a malicious networking service and someone connects to this service. This could allow a local user to starve resources, causing a denial of service. |
| CVE-2023-1073 | A memory corruption flaw was found in the Linux kernel’s human interface device (HID) subsystem in how a user inserts a malicious USB device. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| CVE-2023-1032 | The Linux kernel io_uring IORING_OP_SOCKET operation contained a double free in function __sys_socket_file() in file net/socket.c. This issue was introduced in da214a475f8bd1d3e9e7a19ddfeb4d1617551bab and fixed in 649c15c7691e9b13cbe9bf6c65c365350e056067. |
| CVE-2023-0615 | A memory leak flaw and potential divide by zero and Integer overflow was found in the Linux kernel V4L2 and vivid test code functionality. This issue occurs when a user triggers ioctls, such as VIDIOC_S_DV_TIMINGS ioctl. This could allow a local user to crash the system if vivid test code enabled. |
| CVE-2023-0597 | A flaw possibility of memory leak in the Linux kernel cpu_entry_area mapping of X86 CPU data to memory was found in the way user can guess location of exception stack(s) or other important data. A local user could use this flaw to get access to some important data with expected location in memory. |
| CVE-2023-0590 | A use-after-free flaw was found in qdisc_graft in net/sched/sch_api.c in the Linux Kernel due to a race problem. This flaw leads to a denial of service issue. If patch ebda44da44f6 ("net: sched: fix race condition in qdisc_graft()") not applied yet, then kernel could be affected. |
| CVE-2023-0469 | A use-after-free flaw was found in io_uring/filetable.c in io_install_fixed_file in the io_uring subcomponent in the Linux Kernel during call cleanup. This flaw may lead to a denial of service. |
| CVE-2023-0468 | A use-after-free flaw was found in io_uring/poll.c in io_poll_check_events in the io_uring subcomponent in the Linux Kernel due to a race condition of poll_refs. This flaw may cause a NULL pointer dereference. |
| CVE-2023-0461 | There is a use-after-free vulnerability in the Linux Kernel which can be exploited to achieve local privilege escalation. To reach the vulnerability kernel configuration flag CONFIG_TLS or CONFIG_XFRM_ESPINTCP has to be configured, but the operation does not require any privilege. There is a use-after-free bug of icsk_ulp_data of a struct inet_connection_sock. When CONFIG_TLS is enabled, user can install a tls context (struct tls_context) on a connected tcp socket. The context is not cleared if this socket is disconnected and reused as a listener. If a new socket is created from the listener, the context is inherited and vulnerable. The setsockopt TCP_ULP operation does not require any privilege. We recommend upgrading past commit 2c02d41d71f90a5168391b6a5f2954112ba2307c |
| CVE-2023-0459 | Copy_from_user on 64-bit versions of the Linux kernel does not implement the __uaccess_begin_nospec allowing a user to bypass the "access_ok" check and pass a kernel pointer to copy_from_user(). This would allow an attacker to leak information. We recommend upgrading beyond commit 74e19ef0ff8061ef55957c3abd71614ef0f42f47 |
| CVE-2023-0458 | A speculative pointer dereference problem exists in the Linux Kernel on the do_prlimit() function. The resource argument value is controlled and is used in pointer arithmetic for the 'rlim' variable and can be used to leak the contents. We recommend upgrading past version 6.1.8 or commit 739790605705ddcf18f21782b9c99ad7d53a8c11 |
| CVE-2023-0394 | A NULL pointer dereference flaw was found in rawv6_push_pending_frames in net/ipv6/raw.c in the network subcomponent in the Linux kernel. This flaw causes the system to crash. |
| CVE-2023-0386 | A flaw was found in the Linux kernel, where unauthorized access to the execution of the setuid file with capabilities was found in the Linux kernel’s OverlayFS subsystem in how a user copies a capable file from a nosuid mount into another mount. This uid mapping bug allows a local user to escalate their privileges on the system. |
| CVE-2023-0266 | A use after free vulnerability exists in the ALSA PCM package in the Linux Kernel. SNDRV_CTL_IOCTL_ELEM_{READ|WRITE}32 is missing locks that can be used in a use-after-free that can result in a priviledge escalation to gain ring0 access from the system user. We recommend upgrading past commit 56b88b50565cd8b946a2d00b0c83927b7ebb055e |
| CVE-2023-0240 | There is a logic error in io_uring's implementation which can be used to trigger a use-after-free vulnerability leading to privilege escalation. In the io_prep_async_work function the assumption that the last io_grab_identity call cannot return false is not true, and in this case the function will use the init_cred or the previous linked requests identity to do operations instead of using the current identity. This can lead to reference counting issues causing use-after-free. We recommend upgrading past version 5.10.161. |
| CVE-2023-0210 | A bug affects the Linux kernel’s ksmbd NTLMv2 authentication and is known to crash the OS immediately in Linux-based systems. |
| CVE-2023-0199 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer handler, where an out-of-bounds write can lead to denial of service and data tampering. |
| CVE-2023-0198 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer, where improper restriction of operations within the bounds of a memory buffer can lead to denial of service, information disclosure, and data tampering. |
| CVE-2023-0194 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer driver, where an invalid display configuration may lead to denial of service. |
| CVE-2023-0191 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer handler, where an out-of-bounds access may lead to denial of service or data tampering. |
| CVE-2023-0190 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer, where a NULL pointer dereference may lead to denial of service. |
| CVE-2023-0189 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler which may lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| CVE-2023-0188 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer handler, where an unprivileged user can cause improper restriction of operations within the bounds of a memory buffer cause an out-of-bounds read, which may lead to denial of service. |
| CVE-2023-0187 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer handler, where an out-of-bounds read can lead to denial of service. |
| CVE-2023-0185 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer, where sign conversion issuescasting an unsigned primitive to signed may lead to denial of service or information disclosure. |
| CVE-2023-0184 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer handler which may lead to denial of service, escalation of privileges, information disclosure, and data tampering. |
| CVE-2023-0183 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where an out-of-bounds write can lead to denial of service and data tampering. |
| CVE-2023-0181 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in a kernel mode layer handler, where memory permissions are not correctly checked, which may lead to denial of service and data tampering. |
| CVE-2023-0180 | NVIDIA GPU Display Driver for Linux contains a vulnerability in a kernel mode layer handler, which may lead to denial of service or information disclosure. |
| CVE-2023-0179 | A buffer overflow vulnerability was found in the Netfilter subsystem in the Linux Kernel. This issue could allow the leakage of both stack and heap addresses, and potentially allow Local Privilege Escalation to the root user via arbitrary code execution. |
| CVE-2023-0160 | A deadlock flaw was found in the Linux kernel’s BPF subsystem. This flaw allows a local user to potentially crash the system. |
| CVE-2023-0122 | A NULL pointer dereference vulnerability in the Linux kernel NVMe functionality, in nvmet_setup_auth(), allows an attacker to perform a Pre-Auth Denial of Service (DoS) attack on a remote machine. Affected versions v6.0-rc1 to v6.0-rc3, fixed in v6.0-rc4. |
| CVE-2023-0045 | The current implementation of the prctl syscall does not issue an IBPB immediately during the syscall. The ib_prctl_set function updates the Thread Information Flags (TIFs) for the task and updates the SPEC_CTRL MSR on the function __speculation_ctrl_update, but the IBPB is only issued on the next schedule, when the TIF bits are checked. This leaves the victim vulnerable to values already injected on the BTB, prior to the prctl syscall. The patch that added the support for the conditional mitigation via prctl (ib_prctl_set) dates back to the kernel 4.9.176. We recommend upgrading past commit a664ec9158eeddd75121d39c9a0758016097fa96 |
| CVE-2022-49033 | In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix sleep from invalid context bug in btrfs_qgroup_inherit() Syzkaller reported BUG as follows: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 __might_resched.cold+0x222/0x26b kmem_cache_alloc+0x2e7/0x3c0 update_qgroup_limit_item+0xe1/0x390 btrfs_qgroup_inherit+0x147b/0x1ee0 create_subvol+0x4eb/0x1710 btrfs_mksubvol+0xfe5/0x13f0 __btrfs_ioctl_snap_create+0x2b0/0x430 btrfs_ioctl_snap_create_v2+0x25a/0x520 btrfs_ioctl+0x2a1c/0x5ce0 __x64_sys_ioctl+0x193/0x200 do_syscall_64+0x35/0x80 Fix this by calling qgroup_dirty() on @dstqgroup, and update limit item in btrfs_run_qgroups() later outside of the spinlock context. |
| CVE-2022-49032 | In the Linux kernel, the following vulnerability has been resolved: iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw KASAN report out-of-bounds read as follows: BUG: KASAN: global-out-of-bounds in afe4404_read_raw+0x2ce/0x380 Read of size 4 at addr ffffffffc00e4658 by task cat/278 Call Trace: afe4404_read_raw iio_read_channel_info dev_attr_show The buggy address belongs to the variable: afe4404_channel_leds+0x18/0xffffffffffffe9c0 This issue can be reproduce by singe command: $ cat /sys/bus/i2c/devices/0-0058/iio\:device0/in_intensity6_raw The array size of afe4404_channel_leds and afe4404_channel_offdacs are less than channels, so access with chan->address cause OOB read in afe4404_[read|write]_raw. Fix it by moving access before use them. |
| CVE-2022-49031 | In the Linux kernel, the following vulnerability has been resolved: iio: health: afe4403: Fix oob read in afe4403_read_raw KASAN report out-of-bounds read as follows: BUG: KASAN: global-out-of-bounds in afe4403_read_raw+0x42e/0x4c0 Read of size 4 at addr ffffffffc02ac638 by task cat/279 Call Trace: afe4403_read_raw iio_read_channel_info dev_attr_show The buggy address belongs to the variable: afe4403_channel_leds+0x18/0xffffffffffffe9e0 This issue can be reproduced by singe command: $ cat /sys/bus/spi/devices/spi0.0/iio\:device0/in_intensity6_raw The array size of afe4403_channel_leds is less than channels, so access with chan->address cause OOB read in afe4403_read_raw. Fix it by moving access before use it. |
| CVE-2022-49030 | In the Linux kernel, the following vulnerability has been resolved: libbpf: Handle size overflow for ringbuf mmap The maximum size of ringbuf is 2GB on x86-64 host, so 2 * max_entries will overflow u32 when mapping producer page and data pages. Only casting max_entries to size_t is not enough, because for 32-bits application on 64-bits kernel the size of read-only mmap region also could overflow size_t. So fixing it by casting the size of read-only mmap region into a __u64 and checking whether or not there will be overflow during mmap. |
| CVE-2022-49029 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails Smatch report warning as follows: drivers/hwmon/ibmpex.c:509 ibmpex_register_bmc() warn: '&data->list' not removed from list If ibmpex_find_sensors() fails in ibmpex_register_bmc(), data will be freed, but data->list will not be removed from driver_data.bmc_data, then list traversal may cause UAF. Fix by removeing it from driver_data.bmc_data before free(). |
| CVE-2022-49028 | In the Linux kernel, the following vulnerability has been resolved: ixgbevf: Fix resource leak in ixgbevf_init_module() ixgbevf_init_module() won't destroy the workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Add destroy_workqueue() in fail path to prevent the resource leak. Similar to the handling of u132_hcd_init in commit f276e002793c ("usb: u132-hcd: fix resource leak") |
| CVE-2022-49027 | In the Linux kernel, the following vulnerability has been resolved: iavf: Fix error handling in iavf_init_module() The iavf_init_module() won't destroy workqueue when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak. Similar to the handling of u132_hcd_init in commit f276e002793c ("usb: u132-hcd: fix resource leak") |
| CVE-2022-49026 | In the Linux kernel, the following vulnerability has been resolved: e100: Fix possible use after free in e100_xmit_prepare In e100_xmit_prepare(), if we can't map the skb, then return -ENOMEM, so e100_xmit_frame() will return NETDEV_TX_BUSY and the upper layer will resend the skb. But the skb is already freed, which will cause UAF bug when the upper layer resends the skb. Remove the harmful free. |
| CVE-2022-49025 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free when reverting termination table When having multiple dests with termination tables and second one or afterwards fails the driver reverts usage of term tables but doesn't reset the assignment in attr->dests[num_vport_dests].termtbl which case a use-after-free when releasing the rule. Fix by resetting the assignment of termtbl to null. |
| CVE-2022-49024 | In the Linux kernel, the following vulnerability has been resolved: can: m_can: pci: add missing m_can_class_free_dev() in probe/remove methods In m_can_pci_remove() and error handling path of m_can_pci_probe(), m_can_class_free_dev() should be called to free resource allocated by m_can_class_allocate_dev(), otherwise there will be memleak. |
| CVE-2022-49023 | In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: fix buffer overflow in elem comparison For vendor elements, the code here assumes that 5 octets are present without checking. Since the element itself is already checked to fit, we only need to check the length. |
| CVE-2022-49022 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration Fix possible out-of-bound access in ieee80211_get_rate_duration routine as reported by the following UBSAN report: UBSAN: array-index-out-of-bounds in net/mac80211/airtime.c:455:47 index 15 is out of range for type 'u16 [12]' CPU: 2 PID: 217 Comm: kworker/u32:10 Not tainted 6.1.0-060100rc3-generic Hardware name: Acer Aspire TC-281/Aspire TC-281, BIOS R01-A2 07/18/2017 Workqueue: mt76 mt76u_tx_status_data [mt76_usb] Call Trace: <TASK> show_stack+0x4e/0x61 dump_stack_lvl+0x4a/0x6f dump_stack+0x10/0x18 ubsan_epilogue+0x9/0x43 __ubsan_handle_out_of_bounds.cold+0x42/0x47 ieee80211_get_rate_duration.constprop.0+0x22f/0x2a0 [mac80211] ? ieee80211_tx_status_ext+0x32e/0x640 [mac80211] ieee80211_calc_rx_airtime+0xda/0x120 [mac80211] ieee80211_calc_tx_airtime+0xb4/0x100 [mac80211] mt76x02_send_tx_status+0x266/0x480 [mt76x02_lib] mt76x02_tx_status_data+0x52/0x80 [mt76x02_lib] mt76u_tx_status_data+0x67/0xd0 [mt76_usb] process_one_work+0x225/0x400 worker_thread+0x50/0x3e0 ? process_one_work+0x400/0x400 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 |
| CVE-2022-49021 | In the Linux kernel, the following vulnerability has been resolved: net: phy: fix null-ptr-deref while probe() failed I got a null-ptr-deref report as following when doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x23e/0x2d0 bus_remove_device+0x1bd/0x240 device_del+0x357/0x770 phy_device_remove+0x11/0x30 mdiobus_unregister+0xa5/0x140 release_nodes+0x6a/0xa0 devres_release_all+0xf8/0x150 device_unbind_cleanup+0x19/0xd0 //probe path: phy_device_register() device_add() phy_connect phy_attach_direct() //set device driver probe() //it's failed, driver is not bound device_bind_driver() // probe failed, it's not called //remove path: phy_device_remove() device_del() device_release_driver_internal() __device_release_driver() //dev->drv is not NULL klist_remove() <- knode_driver is not added yet, cause null-ptr-deref In phy_attach_direct(), after setting the 'dev->driver', probe() fails, device_bind_driver() is not called, so the knode_driver->n_klist is not set, then it causes null-ptr-deref in __device_release_driver() while deleting device. Fix this by setting dev->driver to NULL in the error path in phy_attach_direct(). |
| CVE-2022-49020 | In the Linux kernel, the following vulnerability has been resolved: net/9p: Fix a potential socket leak in p9_socket_open Both p9_fd_create_tcp() and p9_fd_create_unix() will call p9_socket_open(). If the creation of p9_trans_fd fails, p9_fd_create_tcp() and p9_fd_create_unix() will return an error directly instead of releasing the cscoket, which will result in a socket leak. This patch adds sock_release() to fix the leak issue. |
| CVE-2022-49019 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: nixge: fix NULL dereference In function nixge_hw_dma_bd_release() dereference of NULL pointer priv->rx_bd_v is possible for the case of its allocation failure in nixge_hw_dma_bd_init(). Move for() loop with priv->rx_bd_v dereference under the check for its validity. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2022-49018 | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix sleep in atomic at close time Matt reported a splat at msk close time: BUG: sleeping function called from invalid context at net/mptcp/protocol.c:2877 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 155, name: packetdrill preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 4 locks held by packetdrill/155: #0: ffff888001536990 (&sb->s_type->i_mutex_key#6){+.+.}-{3:3}, at: __sock_release (net/socket.c:650) #1: ffff88800b498130 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close (net/mptcp/protocol.c:2973) #2: ffff88800b49a130 (sk_lock-AF_INET/1){+.+.}-{0:0}, at: __mptcp_close_ssk (net/mptcp/protocol.c:2363) #3: ffff88800b49a0b0 (slock-AF_INET){+...}-{2:2}, at: __lock_sock_fast (include/net/sock.h:1820) Preemption disabled at: 0x0 CPU: 1 PID: 155 Comm: packetdrill Not tainted 6.1.0-rc5 #365 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) __might_resched.cold (kernel/sched/core.c:9891) __mptcp_destroy_sock (include/linux/kernel.h:110) __mptcp_close (net/mptcp/protocol.c:2959) mptcp_subflow_queue_clean (include/net/sock.h:1777) __mptcp_close_ssk (net/mptcp/protocol.c:2363) mptcp_destroy_common (net/mptcp/protocol.c:3170) mptcp_destroy (include/net/sock.h:1495) __mptcp_destroy_sock (net/mptcp/protocol.c:2886) __mptcp_close (net/mptcp/protocol.c:2959) mptcp_close (net/mptcp/protocol.c:2974) inet_release (net/ipv4/af_inet.c:432) __sock_release (net/socket.c:651) sock_close (net/socket.c:1367) __fput (fs/file_table.c:320) task_work_run (kernel/task_work.c:181 (discriminator 1)) exit_to_user_mode_prepare (include/linux/resume_user_mode.h:49) syscall_exit_to_user_mode (kernel/entry/common.c:130) do_syscall_64 (arch/x86/entry/common.c:87) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) We can't call mptcp_close under the 'fast' socket lock variant, replace it with a sock_lock_nested() as the relevant code is already under the listening msk socket lock protection. |
| CVE-2022-49017 | In the Linux kernel, the following vulnerability has been resolved: tipc: re-fetch skb cb after tipc_msg_validate As the call trace shows, the original skb was freed in tipc_msg_validate(), and dereferencing the old skb cb would cause an use-after-free crash. BUG: KASAN: use-after-free in tipc_crypto_rcv_complete+0x1835/0x2240 [tipc] Call Trace: <IRQ> tipc_crypto_rcv_complete+0x1835/0x2240 [tipc] tipc_crypto_rcv+0xd32/0x1ec0 [tipc] tipc_rcv+0x744/0x1150 [tipc] ... Allocated by task 47078: kmem_cache_alloc_node+0x158/0x4d0 __alloc_skb+0x1c1/0x270 tipc_buf_acquire+0x1e/0xe0 [tipc] tipc_msg_create+0x33/0x1c0 [tipc] tipc_link_build_proto_msg+0x38a/0x2100 [tipc] tipc_link_timeout+0x8b8/0xef0 [tipc] tipc_node_timeout+0x2a1/0x960 [tipc] call_timer_fn+0x2d/0x1c0 ... Freed by task 47078: tipc_msg_validate+0x7b/0x440 [tipc] tipc_crypto_rcv_complete+0x4b5/0x2240 [tipc] tipc_crypto_rcv+0xd32/0x1ec0 [tipc] tipc_rcv+0x744/0x1150 [tipc] This patch fixes it by re-fetching the skb cb from the new allocated skb after calling tipc_msg_validate(). |
| CVE-2022-49016 | In the Linux kernel, the following vulnerability has been resolved: net: mdiobus: fix unbalanced node reference count I got the following report while doing device(mscc-miim) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0 If the 'fwnode' is not an acpi node, the refcount is get in fwnode_mdiobus_phy_device_register(), but it has never been put when the device is freed in the normal path. So call fwnode_handle_put() in phy_device_release() to avoid leak. If it's an acpi node, it has never been get, but it's put in the error path, so call fwnode_handle_get() before phy_device_register() to keep get/put operation balanced. |
| CVE-2022-49015 | In the Linux kernel, the following vulnerability has been resolved: net: hsr: Fix potential use-after-free The skb is delivered to netif_rx() which may free it, after calling this, dereferencing skb may trigger use-after-free. |
| CVE-2022-49014 | In the Linux kernel, the following vulnerability has been resolved: net: tun: Fix use-after-free in tun_detach() syzbot reported use-after-free in tun_detach() [1]. This causes call trace like below: ================================================================== BUG: KASAN: use-after-free in notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75 Read of size 8 at addr ffff88807324e2a8 by task syz-executor.0/3673 CPU: 0 PID: 3673 Comm: syz-executor.0 Not tainted 6.1.0-rc5-syzkaller-00044-gcc675d22e422 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x461 mm/kasan/report.c:395 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495 notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75 call_netdevice_notifiers_info+0x86/0x130 net/core/dev.c:1942 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] netdev_wait_allrefs_any net/core/dev.c:10237 [inline] netdev_run_todo+0xbc6/0x1100 net/core/dev.c:10351 tun_detach drivers/net/tun.c:704 [inline] tun_chr_close+0xe4/0x190 drivers/net/tun.c:3467 __fput+0x27c/0xa90 fs/file_table.c:320 task_work_run+0x16f/0x270 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xb3d/0x2a30 kernel/exit.c:820 do_group_exit+0xd4/0x2a0 kernel/exit.c:950 get_signal+0x21b1/0x2440 kernel/signal.c:2858 arch_do_signal_or_restart+0x86/0x2300 arch/x86/kernel/signal.c:869 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd The cause of the issue is that sock_put() from __tun_detach() drops last reference count for struct net, and then notifier_call_chain() from netdev_state_change() accesses that struct net. This patch fixes the issue by calling sock_put() from tun_detach() after all necessary accesses for the struct net has done. |
| CVE-2022-49013 | In the Linux kernel, the following vulnerability has been resolved: sctp: fix memory leak in sctp_stream_outq_migrate() When sctp_stream_outq_migrate() is called to release stream out resources, the memory pointed to by prio_head in stream out is not released. The memory leak information is as follows: unreferenced object 0xffff88801fe79f80 (size 64): comm "sctp_repo", pid 7957, jiffies 4294951704 (age 36.480s) hex dump (first 32 bytes): 80 9f e7 1f 80 88 ff ff 80 9f e7 1f 80 88 ff ff ................ 90 9f e7 1f 80 88 ff ff 90 9f e7 1f 80 88 ff ff ................ backtrace: [<ffffffff81b215c6>] kmalloc_trace+0x26/0x60 [<ffffffff88ae517c>] sctp_sched_prio_set+0x4cc/0x770 [<ffffffff88ad64f2>] sctp_stream_init_ext+0xd2/0x1b0 [<ffffffff88aa2604>] sctp_sendmsg_to_asoc+0x1614/0x1a30 [<ffffffff88ab7ff1>] sctp_sendmsg+0xda1/0x1ef0 [<ffffffff87f765ed>] inet_sendmsg+0x9d/0xe0 [<ffffffff8754b5b3>] sock_sendmsg+0xd3/0x120 [<ffffffff8755446a>] __sys_sendto+0x23a/0x340 [<ffffffff87554651>] __x64_sys_sendto+0xe1/0x1b0 [<ffffffff89978b49>] do_syscall_64+0x39/0xb0 [<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| CVE-2022-49012 | In the Linux kernel, the following vulnerability has been resolved: afs: Fix server->active leak in afs_put_server The atomic_read was accidentally replaced with atomic_inc_return, which prevents the server from getting cleaned up and causes rmmod to hang with a warning: Can't purge s=00000001 |
| CVE-2022-49011 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new() As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So call it after using to avoid refcount leak. |
| CVE-2022-49010 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Check for null before removing sysfs attrs If coretemp_add_core() gets an error then pdata->core_data[indx] is already NULL and has been kfreed. Don't pass that to sysfs_remove_group() as that will crash in sysfs_remove_group(). [Shortened for readability] [91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label' <cpu offline> [91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188 [91855.165103] #PF: supervisor read access in kernel mode [91855.194506] #PF: error_code(0x0000) - not-present page [91855.224445] PGD 0 P4D 0 [91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI ... [91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80 ... [91855.796571] Call Trace: [91855.810524] coretemp_cpu_offline+0x12b/0x1dd [coretemp] [91855.841738] ? coretemp_cpu_online+0x180/0x180 [coretemp] [91855.871107] cpuhp_invoke_callback+0x105/0x4b0 [91855.893432] cpuhp_thread_fun+0x8e/0x150 ... Fix this by checking for NULL first. |
| CVE-2022-49009 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus-ec-sensors) Add checks for devm_kcalloc As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference. |
| CVE-2022-49008 | In the Linux kernel, the following vulnerability has been resolved: can: can327: can327_feed_frame_to_netdev(): fix potential skb leak when netdev is down In can327_feed_frame_to_netdev(), it did not free the skb when netdev is down, and all callers of can327_feed_frame_to_netdev() did not free allocated skb too. That would trigger skb leak. Fix it by adding kfree_skb() in can327_feed_frame_to_netdev() when netdev is down. Not tested, just compiled. |
| CVE-2022-49007 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry() Syzbot reported a null-ptr-deref bug: NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 3603 Comm: segctord Not tainted 6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 RIP: 0010:nilfs_palloc_commit_free_entry+0xe5/0x6b0 fs/nilfs2/alloc.c:608 Code: 00 00 00 00 fc ff df 80 3c 02 00 0f 85 cd 05 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 73 08 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 05 00 00 49 8b 46 10 be a6 00 00 00 48 c7 c7 RSP: 0018:ffffc90003dff830 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88802594e218 RCX: 000000000000000d RDX: 0000000000000002 RSI: 0000000000002000 RDI: 0000000000000010 RBP: ffff888071880222 R08: 0000000000000005 R09: 000000000000003f R10: 000000000000000d R11: 0000000000000000 R12: ffff888071880158 R13: ffff88802594e220 R14: 0000000000000000 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb1c08316a8 CR3: 0000000018560000 CR4: 0000000000350ee0 Call Trace: <TASK> nilfs_dat_commit_free fs/nilfs2/dat.c:114 [inline] nilfs_dat_commit_end+0x464/0x5f0 fs/nilfs2/dat.c:193 nilfs_dat_commit_update+0x26/0x40 fs/nilfs2/dat.c:236 nilfs_btree_commit_update_v+0x87/0x4a0 fs/nilfs2/btree.c:1940 nilfs_btree_commit_propagate_v fs/nilfs2/btree.c:2016 [inline] nilfs_btree_propagate_v fs/nilfs2/btree.c:2046 [inline] nilfs_btree_propagate+0xa00/0xd60 fs/nilfs2/btree.c:2088 nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337 nilfs_collect_file_data+0x45/0xd0 fs/nilfs2/segment.c:568 nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1018 nilfs_segctor_scan_file+0x3f4/0x6f0 fs/nilfs2/segment.c:1067 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1197 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1503 [inline] nilfs_segctor_do_construct+0x12fc/0x6af0 fs/nilfs2/segment.c:2045 nilfs_segctor_construct+0x8e3/0xb30 fs/nilfs2/segment.c:2379 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2487 [inline] nilfs_segctor_thread+0x3c3/0xf30 fs/nilfs2/segment.c:2570 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> ... If DAT metadata file is corrupted on disk, there is a case where req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during a b-tree operation that cascadingly updates ancestor nodes of the b-tree, because nilfs_dat_commit_alloc() for a lower level block can initialize the blocknr on the same DAT entry between nilfs_dat_prepare_end() and nilfs_dat_commit_end(). If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free() without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and causes the NULL pointer dereference above in nilfs_palloc_commit_free_entry() function, which leads to a crash. Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free(). This also calls nilfs_error() in that case to notify that there is a fatal flaw in the filesystem metadata and prevent further operations. |
| CVE-2022-49006 | In the Linux kernel, the following vulnerability has been resolved: tracing: Free buffers when a used dynamic event is removed After 65536 dynamic events have been added and removed, the "type" field of the event then uses the first type number that is available (not currently used by other events). A type number is the identifier of the binary blobs in the tracing ring buffer (known as events) to map them to logic that can parse the binary blob. The issue is that if a dynamic event (like a kprobe event) is traced and is in the ring buffer, and then that event is removed (because it is dynamic, which means it can be created and destroyed), if another dynamic event is created that has the same number that new event's logic on parsing the binary blob will be used. To show how this can be an issue, the following can crash the kernel: # cd /sys/kernel/tracing # for i in `seq 65536`; do echo 'p:kprobes/foo do_sys_openat2 $arg1:u32' > kprobe_events # done For every iteration of the above, the writing to the kprobe_events will remove the old event and create a new one (with the same format) and increase the type number to the next available on until the type number reaches over 65535 which is the max number for the 16 bit type. After it reaches that number, the logic to allocate a new number simply looks for the next available number. When an dynamic event is removed, that number is then available to be reused by the next dynamic event created. That is, once the above reaches the max number, the number assigned to the event in that loop will remain the same. Now that means deleting one dynamic event and created another will reuse the previous events type number. This is where bad things can happen. After the above loop finishes, the kprobes/foo event which reads the do_sys_openat2 function call's first parameter as an integer. # echo 1 > kprobes/foo/enable # cat /etc/passwd > /dev/null # cat trace cat-2211 [005] .... 2007.849603: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849620: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849838: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849880: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 # echo 0 > kprobes/foo/enable Now if we delete the kprobe and create a new one that reads a string: # echo 'p:kprobes/foo do_sys_openat2 +0($arg2):string' > kprobe_events And now we can the trace: # cat trace sendmail-1942 [002] ..... 530.136320: foo: (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.930817: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������" cat-2046 [004] ..... 530.930961: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������" cat-2046 [004] ..... 530.934278: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������" cat-2046 [004] ..... 530.934563: foo: (do_sys_openat2+0x0/0x240) arg1="��������������������������������������� ---truncated--- |
| CVE-2022-49005 | In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Fix bounds check for _sx controls For _sx controls the semantics of the max field is not the usual one, max is the number of steps rather than the maximum value. This means that our check in snd_soc_put_volsw_sx() needs to just check against the maximum value. |
| CVE-2022-49004 | In the Linux kernel, the following vulnerability has been resolved: riscv: Sync efi page table's kernel mappings before switching The EFI page table is initially created as a copy of the kernel page table. With VMAP_STACK enabled, kernel stacks are allocated in the vmalloc area: if the stack is allocated in a new PGD (one that was not present at the moment of the efi page table creation or not synced in a previous vmalloc fault), the kernel will take a trap when switching to the efi page table when the vmalloc kernel stack is accessed, resulting in a kernel panic. Fix that by updating the efi kernel mappings before switching to the efi page table. |
| CVE-2022-49003 | In the Linux kernel, the following vulnerability has been resolved: nvme: fix SRCU protection of nvme_ns_head list Walking the nvme_ns_head siblings list is protected by the head's srcu in nvme_ns_head_submit_bio() but not nvme_mpath_revalidate_paths(). Removing namespaces from the list also fails to synchronize the srcu. Concurrent scan work can therefore cause use-after-frees. Hold the head's srcu lock in nvme_mpath_revalidate_paths() and synchronize with the srcu, not the global RCU, in nvme_ns_remove(). Observed the following panic when making NVMe/RDMA connections with native multipath on the Rocky Linux 8.6 kernel (it seems the upstream kernel has the same race condition). Disassembly shows the faulting instruction is cmp 0x50(%rdx),%rcx; computing capacity != get_capacity(ns->disk). Address 0x50 is dereferenced because ns->disk is NULL. The NULL disk appears to be the result of concurrent scan work freeing the namespace (note the log line in the middle of the panic). [37314.206036] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [37314.206036] nvme0n3: detected capacity change from 0 to 11811160064 [37314.299753] PGD 0 P4D 0 [37314.299756] Oops: 0000 [#1] SMP PTI [37314.299759] CPU: 29 PID: 322046 Comm: kworker/u98:3 Kdump: loaded Tainted: G W X --------- - - 4.18.0-372.32.1.el8test86.x86_64 #1 [37314.299762] Hardware name: Dell Inc. PowerEdge R720/0JP31P, BIOS 2.7.0 05/23/2018 [37314.299763] Workqueue: nvme-wq nvme_scan_work [nvme_core] [37314.299783] RIP: 0010:nvme_mpath_revalidate_paths+0x26/0xb0 [nvme_core] [37314.299790] Code: 1f 44 00 00 66 66 66 66 90 55 53 48 8b 5f 50 48 8b 83 c8 c9 00 00 48 8b 13 48 8b 48 50 48 39 d3 74 20 48 8d 42 d0 48 8b 50 20 <48> 3b 4a 50 74 05 f0 80 60 70 ef 48 8b 50 30 48 8d 42 d0 48 39 d3 [37315.058803] RSP: 0018:ffffabe28f913d10 EFLAGS: 00010202 [37315.121316] RAX: ffff927a077da800 RBX: ffff92991dd70000 RCX: 0000000001600000 [37315.206704] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff92991b719800 [37315.292106] RBP: ffff929a6b70c000 R08: 000000010234cd4a R09: c0000000ffff7fff [37315.377501] R10: 0000000000000001 R11: ffffabe28f913a30 R12: 0000000000000000 [37315.462889] R13: ffff92992716600c R14: ffff929964e6e030 R15: ffff92991dd70000 [37315.548286] FS: 0000000000000000(0000) GS:ffff92b87fb80000(0000) knlGS:0000000000000000 [37315.645111] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [37315.713871] CR2: 0000000000000050 CR3: 0000002208810006 CR4: 00000000000606e0 [37315.799267] Call Trace: [37315.828515] nvme_update_ns_info+0x1ac/0x250 [nvme_core] [37315.892075] nvme_validate_or_alloc_ns+0x2ff/0xa00 [nvme_core] [37315.961871] ? __blk_mq_free_request+0x6b/0x90 [37316.015021] nvme_scan_work+0x151/0x240 [nvme_core] [37316.073371] process_one_work+0x1a7/0x360 [37316.121318] ? create_worker+0x1a0/0x1a0 [37316.168227] worker_thread+0x30/0x390 [37316.212024] ? create_worker+0x1a0/0x1a0 [37316.258939] kthread+0x10a/0x120 [37316.297557] ? set_kthread_struct+0x50/0x50 [37316.347590] ret_from_fork+0x35/0x40 [37316.390360] Modules linked in: nvme_rdma nvme_tcp(X) nvme_fabrics nvme_core netconsole iscsi_tcp libiscsi_tcp dm_queue_length dm_service_time nf_conntrack_netlink br_netfilter bridge stp llc overlay nft_chain_nat ipt_MASQUERADE nf_nat xt_addrtype xt_CT nft_counter xt_state xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment xt_multiport nft_compat nf_tables libcrc32c nfnetlink dm_multipath tg3 rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm intel_rapl_msr iTCO_wdt iTCO_vendor_support dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel ib_uverbs rapl intel_cstate intel_uncore ib_core ipmi_si joydev mei_me pcspkr ipmi_devintf mei lpc_ich wmi ipmi_msghandler acpi_power_meter ex ---truncated--- |
| CVE-2022-49002 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix PCI device refcount leak in dmar_dev_scope_init() for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() for the error path to avoid reference count leak. |
| CVE-2022-49001 | In the Linux kernel, the following vulnerability has been resolved: riscv: fix race when vmap stack overflow Currently, when detecting vmap stack overflow, riscv firstly switches to the so called shadow stack, then use this shadow stack to call the get_overflow_stack() to get the overflow stack. However, there's a race here if two or more harts use the same shadow stack at the same time. To solve this race, we introduce spin_shadow_stack atomic var, which will be swap between its own address and 0 in atomic way, when the var is set, it means the shadow_stack is being used; when the var is cleared, it means the shadow_stack isn't being used. [Palmer: Add AQ to the swap, and also some comments.] |
| CVE-2022-49000 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix PCI device refcount leak in has_external_pci() for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() before 'return true' to avoid reference count leak. |
| CVE-2022-48999 | In the Linux kernel, the following vulnerability has been resolved: ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference Gwangun Jung reported a slab-out-of-bounds access in fib_nh_match: fib_nh_match+0xf98/0x1130 linux-6.0-rc7/net/ipv4/fib_semantics.c:961 fib_table_delete+0x5f3/0xa40 linux-6.0-rc7/net/ipv4/fib_trie.c:1753 inet_rtm_delroute+0x2b3/0x380 linux-6.0-rc7/net/ipv4/fib_frontend.c:874 Separate nexthop objects are mutually exclusive with the legacy multipath spec. Fix fib_nh_match to return if the config for the to be deleted route contains a multipath spec while the fib_info is using a nexthop object. |
| CVE-2022-48998 | In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf/32: Fix Oops on tail call tests test_bpf tail call tests end up as: test_bpf: #0 Tail call leaf jited:1 85 PASS test_bpf: #1 Tail call 2 jited:1 111 PASS test_bpf: #2 Tail call 3 jited:1 145 PASS test_bpf: #3 Tail call 4 jited:1 170 PASS test_bpf: #4 Tail call load/store leaf jited:1 190 PASS test_bpf: #5 Tail call load/store jited:1 BUG: Unable to handle kernel data access on write at 0xf1b4e000 Faulting instruction address: 0xbe86b710 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash PowerMac Modules linked in: test_bpf(+) CPU: 0 PID: 97 Comm: insmod Not tainted 6.1.0-rc4+ #195 Hardware name: PowerMac3,1 750CL 0x87210 PowerMac NIP: be86b710 LR: be857e88 CTR: be86b704 REGS: f1b4df20 TRAP: 0300 Not tainted (6.1.0-rc4+) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28008242 XER: 00000000 DAR: f1b4e000 DSISR: 42000000 GPR00: 00000001 f1b4dfe0 c11d2280 00000000 00000000 00000000 00000002 00000000 GPR08: f1b4e000 be86b704 f1b4e000 00000000 00000000 100d816a f2440000 fe73baa8 GPR16: f2458000 00000000 c1941ae4 f1fe2248 00000045 c0de0000 f2458030 00000000 GPR24: 000003e8 0000000f f2458000 f1b4dc90 3e584b46 00000000 f24466a0 c1941a00 NIP [be86b710] 0xbe86b710 LR [be857e88] __run_one+0xec/0x264 [test_bpf] Call Trace: [f1b4dfe0] [00000002] 0x2 (unreliable) Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- This is a tentative to write above the stack. The problem is encoutered with tests added by commit 38608ee7b690 ("bpf, tests: Add load store test case for tail call") This happens because tail call is done to a BPF prog with a different stack_depth. At the time being, the stack is kept as is when the caller tail calls its callee. But at exit, the callee restores the stack based on its own properties. Therefore here, at each run, r1 is erroneously increased by 32 - 16 = 16 bytes. This was done that way in order to pass the tail call count from caller to callee through the stack. As powerpc32 doesn't have a red zone in the stack, it was necessary the maintain the stack as is for the tail call. But it was not anticipated that the BPF frame size could be different. Let's take a new approach. Use register r4 to carry the tail call count during the tail call, and save it into the stack at function entry if required. This means the input parameter must be in r3, which is more correct as it is a 32 bits parameter, then tail call better match with normal BPF function entry, the down side being that we move that input parameter back and forth between r3 and r4. That can be optimised later. Doing that also has the advantage of maximising the common parts between tail calls and a normal function exit. With the fix, tail call tests are now successfull: test_bpf: #0 Tail call leaf jited:1 53 PASS test_bpf: #1 Tail call 2 jited:1 115 PASS test_bpf: #2 Tail call 3 jited:1 154 PASS test_bpf: #3 Tail call 4 jited:1 165 PASS test_bpf: #4 Tail call load/store leaf jited:1 101 PASS test_bpf: #5 Tail call load/store jited:1 141 PASS test_bpf: #6 Tail call error path, max count reached jited:1 994 PASS test_bpf: #7 Tail call count preserved across function calls jited:1 140975 PASS test_bpf: #8 Tail call error path, NULL target jited:1 110 PASS test_bpf: #9 Tail call error path, index out of range jited:1 69 PASS test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed] |
| CVE-2022-48997 | In the Linux kernel, the following vulnerability has been resolved: char: tpm: Protect tpm_pm_suspend with locks Currently tpm transactions are executed unconditionally in tpm_pm_suspend() function, which may lead to races with other tpm accessors in the system. Specifically, the hw_random tpm driver makes use of tpm_get_random(), and this function is called in a loop from a kthread, which means it's not frozen alongside userspace, and so can race with the work done during system suspend: tpm tpm0: tpm_transmit: tpm_recv: error -52 tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Call Trace: tpm_tis_status.cold+0x19/0x20 tpm_transmit+0x13b/0x390 tpm_transmit_cmd+0x20/0x80 tpm1_pm_suspend+0xa6/0x110 tpm_pm_suspend+0x53/0x80 __pnp_bus_suspend+0x35/0xe0 __device_suspend+0x10f/0x350 Fix this by calling tpm_try_get_ops(), which itself is a wrapper around tpm_chip_start(), but takes the appropriate mutex. [Jason: reworked commit message, added metadata] |
| CVE-2022-48996 | In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes() Commit da87878010e5 ("mm/damon/sysfs: support online inputs update") made 'damon_sysfs_set_schemes()' to be called for running DAMON context, which could have schemes. In the case, DAMON sysfs interface is supposed to update, remove, or add schemes to reflect the sysfs files. However, the code is assuming the DAMON context wouldn't have schemes at all, and therefore creates and adds new schemes. As a result, the code doesn't work as intended for online schemes tuning and could have more than expected memory footprint. The schemes are all in the DAMON context, so it doesn't leak the memory, though. Remove the wrong asssumption (the DAMON context wouldn't have schemes) in 'damon_sysfs_set_schemes()' to fix the bug. |
| CVE-2022-48995 | In the Linux kernel, the following vulnerability has been resolved: Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send() There is a kmemleak when test the raydium_i2c_ts with bpf mock device: unreferenced object 0xffff88812d3675a0 (size 8): comm "python3", pid 349, jiffies 4294741067 (age 95.695s) hex dump (first 8 bytes): 11 0e 10 c0 01 00 04 00 ........ backtrace: [<0000000068427125>] __kmalloc+0x46/0x1b0 [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts] [<000000006e631aee>] raydium_i2c_initialize.cold+0xbc/0x3e4 [raydium_i2c_ts] [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts] [<00000000a310de16>] i2c_device_probe+0x651/0x680 [<00000000f5a96bf3>] really_probe+0x17c/0x3f0 [<00000000096ba499>] __driver_probe_device+0xe3/0x170 [<00000000c5acb4d9>] driver_probe_device+0x49/0x120 [<00000000264fe082>] __device_attach_driver+0xf7/0x150 [<00000000f919423c>] bus_for_each_drv+0x114/0x180 [<00000000e067feca>] __device_attach+0x1e5/0x2d0 [<0000000054301fc2>] bus_probe_device+0x126/0x140 [<00000000aad93b22>] device_add+0x810/0x1130 [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0 [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110 [<00000000ffec4177>] of_i2c_notify+0x100/0x160 unreferenced object 0xffff88812d3675c8 (size 8): comm "python3", pid 349, jiffies 4294741070 (age 95.692s) hex dump (first 8 bytes): 22 00 36 2d 81 88 ff ff ".6-.... backtrace: [<0000000068427125>] __kmalloc+0x46/0x1b0 [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts] [<000000001d5c9620>] raydium_i2c_initialize.cold+0x223/0x3e4 [raydium_i2c_ts] [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts] [<00000000a310de16>] i2c_device_probe+0x651/0x680 [<00000000f5a96bf3>] really_probe+0x17c/0x3f0 [<00000000096ba499>] __driver_probe_device+0xe3/0x170 [<00000000c5acb4d9>] driver_probe_device+0x49/0x120 [<00000000264fe082>] __device_attach_driver+0xf7/0x150 [<00000000f919423c>] bus_for_each_drv+0x114/0x180 [<00000000e067feca>] __device_attach+0x1e5/0x2d0 [<0000000054301fc2>] bus_probe_device+0x126/0x140 [<00000000aad93b22>] device_add+0x810/0x1130 [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0 [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110 [<00000000ffec4177>] of_i2c_notify+0x100/0x160 After BANK_SWITCH command from i2c BUS, no matter success or error happened, the tx_buf should be freed. |
| CVE-2022-48994 | In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. seq_copy_in_user() and seq_copy_in_kernel() did not have prototypes matching snd_seq_dump_func_t. Adjust this and remove the casts. There are not resulting binary output differences. This was found as a result of Clang's new -Wcast-function-type-strict flag, which is more sensitive than the simpler -Wcast-function-type, which only checks for type width mismatches. |
| CVE-2022-48992 | In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-pcm: Add NULL check in BE reparenting Add NULL check in dpcm_be_reparent API, to handle kernel NULL pointer dereference error. The issue occurred in fuzzing test. |
| CVE-2022-48991 | In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths Any codepath that zaps page table entries must invoke MMU notifiers to ensure that secondary MMUs (like KVM) don't keep accessing pages which aren't mapped anymore. Secondary MMUs don't hold their own references to pages that are mirrored over, so failing to notify them can lead to page use-after-free. I'm marking this as addressing an issue introduced in commit f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages"), but most of the security impact of this only came in commit 27e1f8273113 ("khugepaged: enable collapse pmd for pte-mapped THP"), which actually omitted flushes for the removal of present PTEs, not just for the removal of empty page tables. |
| CVE-2022-48990 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix use-after-free during gpu recovery [Why] [ 754.862560] refcount_t: underflow; use-after-free. [ 754.862898] Call Trace: [ 754.862903] <TASK> [ 754.862913] amdgpu_job_free_cb+0xc2/0xe1 [amdgpu] [ 754.863543] drm_sched_main.cold+0x34/0x39 [amd_sched] [How] The fw_fence may be not init, check whether dma_fence_init is performed before job free |
| CVE-2022-48989 | In the Linux kernel, the following vulnerability has been resolved: fscache: Fix oops due to race with cookie_lru and use_cookie If a cookie expires from the LRU and the LRU_DISCARD flag is set, but the state machine has not run yet, it's possible another thread can call fscache_use_cookie and begin to use it. When the cookie_worker finally runs, it will see the LRU_DISCARD flag set, transition the cookie->state to LRU_DISCARDING, which will then withdraw the cookie. Once the cookie is withdrawn the object is removed the below oops will occur because the object associated with the cookie is now NULL. Fix the oops by clearing the LRU_DISCARD bit if another thread uses the cookie before the cookie_worker runs. BUG: kernel NULL pointer dereference, address: 0000000000000008 ... CPU: 31 PID: 44773 Comm: kworker/u130:1 Tainted: G E 6.0.0-5.dneg.x86_64 #1 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Workqueue: events_unbound netfs_rreq_write_to_cache_work [netfs] RIP: 0010:cachefiles_prepare_write+0x28/0x90 [cachefiles] ... Call Trace: netfs_rreq_write_to_cache_work+0x11c/0x320 [netfs] process_one_work+0x217/0x3e0 worker_thread+0x4a/0x3b0 kthread+0xd6/0x100 |
| CVE-2022-48988 | In the Linux kernel, the following vulnerability has been resolved: memcg: fix possible use-after-free in memcg_write_event_control() memcg_write_event_control() accesses the dentry->d_name of the specified control fd to route the write call. As a cgroup interface file can't be renamed, it's safe to access d_name as long as the specified file is a regular cgroup file. Also, as these cgroup interface files can't be removed before the directory, it's safe to access the parent too. Prior to 347c4a874710 ("memcg: remove cgroup_event->cft"), there was a call to __file_cft() which verified that the specified file is a regular cgroupfs file before further accesses. The cftype pointer returned from __file_cft() was no longer necessary and the commit inadvertently dropped the file type check with it allowing any file to slip through. With the invarients broken, the d_name and parent accesses can now race against renames and removals of arbitrary files and cause use-after-free's. Fix the bug by resurrecting the file type check in __file_cft(). Now that cgroupfs is implemented through kernfs, checking the file operations needs to go through a layer of indirection. Instead, let's check the superblock and dentry type. |
| CVE-2022-48987 | In the Linux kernel, the following vulnerability has been resolved: media: v4l2-dv-timings.c: fix too strict blanking sanity checks Sanity checks were added to verify the v4l2_bt_timings blanking fields in order to avoid integer overflows when userspace passes weird values. But that assumed that userspace would correctly fill in the front porch, backporch and sync values, but sometimes all you know is the total blanking, which is then assigned to just one of these fields. And that can fail with these checks. So instead set a maximum for the total horizontal and vertical blanking and check that each field remains below that. That is still sufficient to avoid integer overflows, but it also allows for more flexibility in how userspace fills in these fields. |
| CVE-2022-48986 | In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix gup_pud_range() for dax For dax pud, pud_huge() returns true on x86. So the function works as long as hugetlb is configured. However, dax doesn't depend on hugetlb. Commit 414fd080d125 ("mm/gup: fix gup_pmd_range() for dax") fixed devmap-backed huge PMDs, but missed devmap-backed huge PUDs. Fix this as well. This fixes the below kernel panic: general protection fault, probably for non-canonical address 0x69e7c000cc478: 0000 [#1] SMP < snip > Call Trace: <TASK> get_user_pages_fast+0x1f/0x40 iov_iter_get_pages+0xc6/0x3b0 ? mempool_alloc+0x5d/0x170 bio_iov_iter_get_pages+0x82/0x4e0 ? bvec_alloc+0x91/0xc0 ? bio_alloc_bioset+0x19a/0x2a0 blkdev_direct_IO+0x282/0x480 ? __io_complete_rw_common+0xc0/0xc0 ? filemap_range_has_page+0x82/0xc0 generic_file_direct_write+0x9d/0x1a0 ? inode_update_time+0x24/0x30 __generic_file_write_iter+0xbd/0x1e0 blkdev_write_iter+0xb4/0x150 ? io_import_iovec+0x8d/0x340 io_write+0xf9/0x300 io_issue_sqe+0x3c3/0x1d30 ? sysvec_reschedule_ipi+0x6c/0x80 __io_queue_sqe+0x33/0x240 ? fget+0x76/0xa0 io_submit_sqes+0xe6a/0x18d0 ? __fget_light+0xd1/0x100 __x64_sys_io_uring_enter+0x199/0x880 ? __context_tracking_enter+0x1f/0x70 ? irqentry_exit_to_user_mode+0x24/0x30 ? irqentry_exit+0x1d/0x30 ? __context_tracking_exit+0xe/0x70 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7fc97c11a7be < snip > </TASK> ---[ end trace 48b2e0e67debcaeb ]--- RIP: 0010:internal_get_user_pages_fast+0x340/0x990 < snip > Kernel panic - not syncing: Fatal exception Kernel Offset: disabled |
| CVE-2022-48985 | In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix race on per-CQ variable napi work_done After calling napi_complete_done(), the NAPIF_STATE_SCHED bit may be cleared, and another CPU can start napi thread and access per-CQ variable, cq->work_done. If the other thread (for example, from busy_poll) sets it to a value >= budget, this thread will continue to run when it should stop, and cause memory corruption and panic. To fix this issue, save the per-CQ work_done variable in a local variable before napi_complete_done(), so it won't be corrupted by a possible concurrent thread after napi_complete_done(). Also, add a flag bit to advertise to the NIC firmware: the NAPI work_done variable race is fixed, so the driver is able to reliably support features like busy_poll. |
| CVE-2022-48984 | In the Linux kernel, the following vulnerability has been resolved: can: slcan: fix freed work crash The LTP test pty03 is causing a crash in slcan: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 348 Comm: kworker/0:3 Not tainted 6.0.8-1-default #1 openSUSE Tumbleweed 9d20364b934f5aab0a9bdf84e8f45cfdfae39dab Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 Workqueue: 0x0 (events) RIP: 0010:process_one_work (/home/rich/kernel/linux/kernel/workqueue.c:706 /home/rich/kernel/linux/kernel/workqueue.c:2185) Code: 49 89 ff 41 56 41 55 41 54 55 53 48 89 f3 48 83 ec 10 48 8b 06 48 8b 6f 48 49 89 c4 45 30 e4 a8 04 b8 00 00 00 00 4c 0f 44 e0 <49> 8b 44 24 08 44 8b a8 00 01 00 00 41 83 e5 20 f6 45 10 04 75 0e RSP: 0018:ffffaf7b40f47e98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff9d644e1b8b48 RCX: ffff9d649e439968 RDX: 00000000ffff8455 RSI: ffff9d644e1b8b48 RDI: ffff9d64764aa6c0 RBP: ffff9d649e4335c0 R08: 0000000000000c00 R09: ffff9d64764aa734 R10: 0000000000000007 R11: 0000000000000001 R12: 0000000000000000 R13: ffff9d649e4335e8 R14: ffff9d64490da780 R15: ffff9d64764aa6c0 FS: 0000000000000000(0000) GS:ffff9d649e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000036424000 CR4: 00000000000006f0 Call Trace: <TASK> worker_thread (/home/rich/kernel/linux/kernel/workqueue.c:2436) kthread (/home/rich/kernel/linux/kernel/kthread.c:376) ret_from_fork (/home/rich/kernel/linux/arch/x86/entry/entry_64.S:312) Apparently, the slcan's tx_work is freed while being scheduled. While slcan_netdev_close() (netdev side) calls flush_work(&sl->tx_work), slcan_close() (tty side) does not. So when the netdev is never set UP, but the tty is stuffed with bytes and forced to wakeup write, the work is scheduled, but never flushed. So add an additional flush_work() to slcan_close() to be sure the work is flushed under all circumstances. The Fixes commit below moved flush_work() from slcan_close() to slcan_netdev_close(). What was the rationale behind it? Maybe we can drop the one in slcan_netdev_close()? I see the same pattern in can327. So it perhaps needs the very same fix. |
| CVE-2022-48983 | In the Linux kernel, the following vulnerability has been resolved: io_uring: Fix a null-ptr-deref in io_tctx_exit_cb() Syzkaller reports a NULL deref bug as follows: BUG: KASAN: null-ptr-deref in io_tctx_exit_cb+0x53/0xd3 Read of size 4 at addr 0000000000000138 by task file1/1955 CPU: 1 PID: 1955 Comm: file1 Not tainted 6.1.0-rc7-00103-gef4d3ea40565 #75 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ? io_tctx_exit_cb+0x53/0xd3 kasan_report+0xbb/0x1f0 ? io_tctx_exit_cb+0x53/0xd3 kasan_check_range+0x140/0x190 io_tctx_exit_cb+0x53/0xd3 task_work_run+0x164/0x250 ? task_work_cancel+0x30/0x30 get_signal+0x1c3/0x2440 ? lock_downgrade+0x6e0/0x6e0 ? lock_downgrade+0x6e0/0x6e0 ? exit_signals+0x8b0/0x8b0 ? do_raw_read_unlock+0x3b/0x70 ? do_raw_spin_unlock+0x50/0x230 arch_do_signal_or_restart+0x82/0x2470 ? kmem_cache_free+0x260/0x4b0 ? putname+0xfe/0x140 ? get_sigframe_size+0x10/0x10 ? do_execveat_common.isra.0+0x226/0x710 ? lockdep_hardirqs_on+0x79/0x100 ? putname+0xfe/0x140 ? do_execveat_common.isra.0+0x238/0x710 exit_to_user_mode_prepare+0x15f/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0023:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 002b:00000000fffb7790 EFLAGS: 00000200 ORIG_RAX: 000000000000000b RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: panic_on_warn set ... This happens because the adding of task_work from io_ring_exit_work() isn't synchronized with canceling all work items from eg exec. The execution of the two are ordered in that they are both run by the task itself, but if io_tctx_exit_cb() is queued while we're canceling all work items off exec AND gets executed when the task exits to userspace rather than in the main loop in io_uring_cancel_generic(), then we can find current->io_uring == NULL and hit the above crash. It's safe to add this NULL check here, because the execution of the two paths are done by the task itself. [axboe: add code comment and also put an explanation in the commit msg] |
| CVE-2022-48982 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix crash when replugging CSR fake controllers It seems fake CSR 5.0 clones can cause the suspend notifier to be registered twice causing the following kernel panic: [ 71.986122] Call Trace: [ 71.986124] <TASK> [ 71.986125] blocking_notifier_chain_register+0x33/0x60 [ 71.986130] hci_register_dev+0x316/0x3d0 [bluetooth 99b5497ea3d09708fa1366c1dc03288bf3cca8da] [ 71.986154] btusb_probe+0x979/0xd85 [btusb e1e0605a4f4c01984a4b9c8ac58c3666ae287477] [ 71.986159] ? __pm_runtime_set_status+0x1a9/0x300 [ 71.986162] ? ktime_get_mono_fast_ns+0x3e/0x90 [ 71.986167] usb_probe_interface+0xe3/0x2b0 [ 71.986171] really_probe+0xdb/0x380 [ 71.986174] ? pm_runtime_barrier+0x54/0x90 [ 71.986177] __driver_probe_device+0x78/0x170 [ 71.986180] driver_probe_device+0x1f/0x90 [ 71.986183] __device_attach_driver+0x89/0x110 [ 71.986186] ? driver_allows_async_probing+0x70/0x70 [ 71.986189] bus_for_each_drv+0x8c/0xe0 [ 71.986192] __device_attach+0xb2/0x1e0 [ 71.986195] bus_probe_device+0x92/0xb0 [ 71.986198] device_add+0x422/0x9a0 [ 71.986201] ? sysfs_merge_group+0xd4/0x110 [ 71.986205] usb_set_configuration+0x57a/0x820 [ 71.986208] usb_generic_driver_probe+0x4f/0x70 [ 71.986211] usb_probe_device+0x3a/0x110 [ 71.986213] really_probe+0xdb/0x380 [ 71.986216] ? pm_runtime_barrier+0x54/0x90 [ 71.986219] __driver_probe_device+0x78/0x170 [ 71.986221] driver_probe_device+0x1f/0x90 [ 71.986224] __device_attach_driver+0x89/0x110 [ 71.986227] ? driver_allows_async_probing+0x70/0x70 [ 71.986230] bus_for_each_drv+0x8c/0xe0 [ 71.986232] __device_attach+0xb2/0x1e0 [ 71.986235] bus_probe_device+0x92/0xb0 [ 71.986237] device_add+0x422/0x9a0 [ 71.986239] ? _dev_info+0x7d/0x98 [ 71.986242] ? blake2s_update+0x4c/0xc0 [ 71.986246] usb_new_device.cold+0x148/0x36d [ 71.986250] hub_event+0xa8a/0x1910 [ 71.986255] process_one_work+0x1c4/0x380 [ 71.986259] worker_thread+0x51/0x390 [ 71.986262] ? rescuer_thread+0x3b0/0x3b0 [ 71.986264] kthread+0xdb/0x110 [ 71.986266] ? kthread_complete_and_exit+0x20/0x20 [ 71.986268] ret_from_fork+0x1f/0x30 [ 71.986273] </TASK> [ 71.986274] ---[ end trace 0000000000000000 ]--- [ 71.986284] btusb: probe of 2-1.6:1.0 failed with error -17 |
| CVE-2022-48981 | In the Linux kernel, the following vulnerability has been resolved: drm/shmem-helper: Remove errant put in error path drm_gem_shmem_mmap() doesn't own this reference, resulting in the GEM object getting prematurely freed leading to a later use-after-free. |
| CVE-2022-48980 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing() The SJA1105 family has 45 L2 policing table entries (SJA1105_MAX_L2_POLICING_COUNT) and SJA1110 has 110 (SJA1110_MAX_L2_POLICING_COUNT). Keeping the table structure but accounting for the difference in port count (5 in SJA1105 vs 10 in SJA1110) does not fully explain the difference. Rather, the SJA1110 also has L2 ingress policers for multicast traffic. If a packet is classified as multicast, it will be processed by the policer index 99 + SRCPORT. The sja1105_init_l2_policing() function initializes all L2 policers such that they don't interfere with normal packet reception by default. To have a common code between SJA1105 and SJA1110, the index of the multicast policer for the port is calculated because it's an index that is out of bounds for SJA1105 but in bounds for SJA1110, and a bounds check is performed. The code fails to do the proper thing when determining what to do with the multicast policer of port 0 on SJA1105 (ds->num_ports = 5). The "mcast" index will be equal to 45, which is also equal to table->ops->max_entry_count (SJA1105_MAX_L2_POLICING_COUNT). So it passes through the check. But at the same time, SJA1105 doesn't have multicast policers. So the code programs the SHARINDX field of an out-of-bounds element in the L2 Policing table of the static config. The comparison between index 45 and 45 entries should have determined the code to not access this policer index on SJA1105, since its memory wasn't even allocated. With enough bad luck, the out-of-bounds write could even overwrite other valid kernel data, but in this case, the issue was detected using KASAN. Kernel log: sja1105 spi5.0: Probed switch chip: SJA1105Q ================================================================== BUG: KASAN: slab-out-of-bounds in sja1105_setup+0x1cbc/0x2340 Write of size 8 at addr ffffff880bd57708 by task kworker/u8:0/8 ... Workqueue: events_unbound deferred_probe_work_func Call trace: ... sja1105_setup+0x1cbc/0x2340 dsa_register_switch+0x1284/0x18d0 sja1105_probe+0x748/0x840 ... Allocated by task 8: ... sja1105_setup+0x1bcc/0x2340 dsa_register_switch+0x1284/0x18d0 sja1105_probe+0x748/0x840 ... |
| CVE-2022-48979 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix array index out of bound error in DCN32 DML [Why&How] LinkCapacitySupport array is indexed with the number of voltage states and not the number of max DPPs. Fix the error by changing the array declaration to use the correct (larger) array size of total number of voltage states. |
| CVE-2022-48978 | In the Linux kernel, the following vulnerability has been resolved: HID: core: fix shift-out-of-bounds in hid_report_raw_event Syzbot reported shift-out-of-bounds in hid_report_raw_event. microsoft 0003:045E:07DA.0001: hid_field_extract() called with n (128) > 32! (swapper/0) ====================================================================== UBSAN: shift-out-of-bounds in drivers/hid/hid-core.c:1323:20 shift exponent 127 is too large for 32-bit type 'int' CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rc4-syzkaller-00159-g4bbf3422df78 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x3a6/0x420 lib/ubsan.c:322 snto32 drivers/hid/hid-core.c:1323 [inline] hid_input_fetch_field drivers/hid/hid-core.c:1572 [inline] hid_process_report drivers/hid/hid-core.c:1665 [inline] hid_report_raw_event+0xd56/0x18b0 drivers/hid/hid-core.c:1998 hid_input_report+0x408/0x4f0 drivers/hid/hid-core.c:2066 hid_irq_in+0x459/0x690 drivers/hid/usbhid/hid-core.c:284 __usb_hcd_giveback_urb+0x369/0x530 drivers/usb/core/hcd.c:1671 dummy_timer+0x86b/0x3110 drivers/usb/gadget/udc/dummy_hcd.c:1988 call_timer_fn+0xf5/0x210 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers+0x76a/0x980 kernel/time/timer.c:1790 run_timer_softirq+0x63/0xf0 kernel/time/timer.c:1803 __do_softirq+0x277/0x75b kernel/softirq.c:571 __irq_exit_rcu+0xec/0x170 kernel/softirq.c:650 irq_exit_rcu+0x5/0x20 kernel/softirq.c:662 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1107 ====================================================================== If the size of the integer (unsigned n) is bigger than 32 in snto32(), shift exponent will be too large for 32-bit type 'int', resulting in a shift-out-of-bounds bug. Fix this by adding a check on the size of the integer (unsigned n) in snto32(). To add support for n greater than 32 bits, set n to 32, if n is greater than 32. |
| CVE-2022-48977 | In the Linux kernel, the following vulnerability has been resolved: can: af_can: fix NULL pointer dereference in can_rcv_filter Analogue to commit 8aa59e355949 ("can: af_can: fix NULL pointer dereference in can_rx_register()") we need to check for a missing initialization of ml_priv in the receive path of CAN frames. Since commit 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device") the check for dev->type to be ARPHRD_CAN is not sufficient anymore since bonding or tun netdevices claim to be CAN devices but do not initialize ml_priv accordingly. |
| CVE-2022-48976 | In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable_offload: fix using __this_cpu_add in preemptible flow_offload_queue_work() can be called in workqueue without bh disabled, like the call trace showed in my act_ct testing, calling NF_FLOW_TABLE_STAT_INC() there would cause a call trace: BUG: using __this_cpu_add() in preemptible [00000000] code: kworker/u4:0/138560 caller is flow_offload_queue_work+0xec/0x1b0 [nf_flow_table] Workqueue: act_ct_workqueue tcf_ct_flow_table_cleanup_work [act_ct] Call Trace: <TASK> dump_stack_lvl+0x33/0x46 check_preemption_disabled+0xc3/0xf0 flow_offload_queue_work+0xec/0x1b0 [nf_flow_table] nf_flow_table_iterate+0x138/0x170 [nf_flow_table] nf_flow_table_free+0x140/0x1a0 [nf_flow_table] tcf_ct_flow_table_cleanup_work+0x2f/0x2b0 [act_ct] process_one_work+0x6a3/0x1030 worker_thread+0x8a/0xdf0 This patch fixes it by using NF_FLOW_TABLE_STAT_INC_ATOMIC() instead in flow_offload_queue_work(). Note that for FLOW_CLS_REPLACE branch in flow_offload_queue_work(), it may not be called in preemptible path, but it's good to use NF_FLOW_TABLE_STAT_INC_ATOMIC() for all cases in flow_offload_queue_work(). |
| CVE-2022-48975 | In the Linux kernel, the following vulnerability has been resolved: gpiolib: fix memory leak in gpiochip_setup_dev() Here is a backtrace report about memory leak detected in gpiochip_setup_dev(): unreferenced object 0xffff88810b406400 (size 512): comm "python3", pid 1682, jiffies 4295346908 (age 24.090s) backtrace: kmalloc_trace device_add device_private_init at drivers/base/core.c:3361 (inlined by) device_add at drivers/base/core.c:3411 cdev_device_add gpiolib_cdev_register gpiochip_setup_dev gpiochip_add_data_with_key gcdev_register() & gcdev_unregister() would call device_add() & device_del() (no matter CONFIG_GPIO_CDEV is enabled or not) to register/unregister device. However, if device_add() succeeds, some resource (like struct device_private allocated by device_private_init()) is not released by device_del(). Therefore, after device_add() succeeds by gcdev_register(), it needs to call put_device() to release resource in the error handle path. Here we move forward the register of release function, and let it release every piece of resource by put_device() instead of kfree(). While at it, fix another subtle issue, i.e. when gc->ngpio is equal to 0, we still call kcalloc() and, in case of further error, kfree() on the ZERO_PTR pointer, which is not NULL. It's not a bug per se, but rather waste of the resources and potentially wrong expectation about contents of the gdev->descs variable. |
| CVE-2022-48974 | In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: fix using __this_cpu_add in preemptible Currently in nf_conntrack_hash_check_insert(), when it fails in nf_ct_ext_valid_pre/post(), NF_CT_STAT_INC() will be called in the preemptible context, a call trace can be triggered: BUG: using __this_cpu_add() in preemptible [00000000] code: conntrack/1636 caller is nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack] Call Trace: <TASK> dump_stack_lvl+0x33/0x46 check_preemption_disabled+0xc3/0xf0 nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack] ctnetlink_create_conntrack+0x3cd/0x4e0 [nf_conntrack_netlink] ctnetlink_new_conntrack+0x1c0/0x450 [nf_conntrack_netlink] nfnetlink_rcv_msg+0x277/0x2f0 [nfnetlink] netlink_rcv_skb+0x50/0x100 nfnetlink_rcv+0x65/0x144 [nfnetlink] netlink_unicast+0x1ae/0x290 netlink_sendmsg+0x257/0x4f0 sock_sendmsg+0x5f/0x70 This patch is to fix it by changing to use NF_CT_STAT_INC_ATOMIC() for nf_ct_ext_valid_pre/post() check in nf_conntrack_hash_check_insert(), as well as nf_ct_ext_valid_post() in __nf_conntrack_confirm(). Note that nf_ct_ext_valid_pre() check in __nf_conntrack_confirm() is safe to use NF_CT_STAT_INC(), as it's under local_bh_disable(). |
| CVE-2022-48973 | In the Linux kernel, the following vulnerability has been resolved: gpio: amd8111: Fix PCI device reference count leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() after the 'out' label. Since pci_dev_put() can handle NULL input parameter, there is no problem for the 'Device not found' branch. For the normal path, add pci_dev_put() in amd_gpio_exit(). |
| CVE-2022-48972 | In the Linux kernel, the following vulnerability has been resolved: mac802154: fix missing INIT_LIST_HEAD in ieee802154_if_add() Kernel fault injection test reports null-ptr-deref as follows: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:cfg802154_netdev_notifier_call+0x120/0x310 include/linux/list.h:114 Call Trace: <TASK> raw_notifier_call_chain+0x6d/0xa0 kernel/notifier.c:87 call_netdevice_notifiers_info+0x6e/0xc0 net/core/dev.c:1944 unregister_netdevice_many_notify+0x60d/0xcb0 net/core/dev.c:1982 unregister_netdevice_queue+0x154/0x1a0 net/core/dev.c:10879 register_netdevice+0x9a8/0xb90 net/core/dev.c:10083 ieee802154_if_add+0x6ed/0x7e0 net/mac802154/iface.c:659 ieee802154_register_hw+0x29c/0x330 net/mac802154/main.c:229 mcr20a_probe+0xaaa/0xcb1 drivers/net/ieee802154/mcr20a.c:1316 ieee802154_if_add() allocates wpan_dev as netdev's private data, but not init the list in struct wpan_dev. cfg802154_netdev_notifier_call() manage the list when device register/unregister, and may lead to null-ptr-deref. Use INIT_LIST_HEAD() on it to initialize it correctly. |
| CVE-2022-48971 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix not cleanup led when bt_init fails bt_init() calls bt_leds_init() to register led, but if it fails later, bt_leds_cleanup() is not called to unregister it. This can cause panic if the argument "bluetooth-power" in text is freed and then another led_trigger_register() tries to access it: BUG: unable to handle page fault for address: ffffffffc06d3bc0 RIP: 0010:strcmp+0xc/0x30 Call Trace: <TASK> led_trigger_register+0x10d/0x4f0 led_trigger_register_simple+0x7d/0x100 bt_init+0x39/0xf7 [bluetooth] do_one_initcall+0xd0/0x4e0 |
| CVE-2022-48970 | In the Linux kernel, the following vulnerability has been resolved: af_unix: Get user_ns from in_skb in unix_diag_get_exact(). Wei Chen reported a NULL deref in sk_user_ns() [0][1], and Paolo diagnosed the root cause: in unix_diag_get_exact(), the newly allocated skb does not have sk. [2] We must get the user_ns from the NETLINK_CB(in_skb).sk and pass it to sk_diag_fill(). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000270 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 12bbce067 P4D 12bbce067 PUD 12bc40067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 27942 Comm: syz-executor.0 Not tainted 6.1.0-rc5-next-20221118 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:sk_user_ns include/net/sock.h:920 [inline] RIP: 0010:sk_diag_dump_uid net/unix/diag.c:119 [inline] RIP: 0010:sk_diag_fill+0x77d/0x890 net/unix/diag.c:170 Code: 89 ef e8 66 d4 2d fd c7 44 24 40 00 00 00 00 49 8d 7c 24 18 e8 54 d7 2d fd 49 8b 5c 24 18 48 8d bb 70 02 00 00 e8 43 d7 2d fd <48> 8b 9b 70 02 00 00 48 8d 7b 10 e8 33 d7 2d fd 48 8b 5b 10 48 8d RSP: 0018:ffffc90000d67968 EFLAGS: 00010246 RAX: ffff88812badaa48 RBX: 0000000000000000 RCX: ffffffff840d481d RDX: 0000000000000465 RSI: 0000000000000000 RDI: 0000000000000270 RBP: ffffc90000d679a8 R08: 0000000000000277 R09: 0000000000000000 R10: 0001ffffffffffff R11: 0001c90000d679a8 R12: ffff88812ac03800 R13: ffff88812c87c400 R14: ffff88812ae42210 R15: ffff888103026940 FS: 00007f08b4e6f700(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 000000012c58b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> unix_diag_get_exact net/unix/diag.c:285 [inline] unix_diag_handler_dump+0x3f9/0x500 net/unix/diag.c:317 __sock_diag_cmd net/core/sock_diag.c:235 [inline] sock_diag_rcv_msg+0x237/0x250 net/core/sock_diag.c:266 netlink_rcv_skb+0x13e/0x250 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x24/0x40 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1356 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1932 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2476 ___sys_sendmsg net/socket.c:2530 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2559 __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x4697f9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f08b4e6ec48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000077bf80 RCX: 00000000004697f9 RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 00000000004d29e9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf80 R13: 0000000000000000 R14: 000000000077bf80 R15: 00007ffdb36bc6c0 </TASK> Modules linked in: CR2: 0000000000000270 [1]: https://lore.kernel.org/netdev/CAO4mrfdvyjFpokhNsiwZiP-wpdSD0AStcJwfKcKQdAALQ9_2Qw@mail.gmail.com/ [2]: https://lore.kernel.org/netdev/[email protected]/ |
| CVE-2022-48969 | In the Linux kernel, the following vulnerability has been resolved: xen-netfront: Fix NULL sring after live migration A NAPI is setup for each network sring to poll data to kernel The sring with source host is destroyed before live migration and new sring with target host is setup after live migration. The NAPI for the old sring is not deleted until setup new sring with target host after migration. With busy_poll/busy_read enabled, the NAPI can be polled before got deleted when resume VM. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xennet_poll+0xae/0xd20 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Call Trace: finish_task_switch+0x71/0x230 timerqueue_del+0x1d/0x40 hrtimer_try_to_cancel+0xb5/0x110 xennet_alloc_rx_buffers+0x2a0/0x2a0 napi_busy_loop+0xdb/0x270 sock_poll+0x87/0x90 do_sys_poll+0x26f/0x580 tracing_map_insert+0x1d4/0x2f0 event_hist_trigger+0x14a/0x260 finish_task_switch+0x71/0x230 __schedule+0x256/0x890 recalc_sigpending+0x1b/0x50 xen_sched_clock+0x15/0x20 __rb_reserve_next+0x12d/0x140 ring_buffer_lock_reserve+0x123/0x3d0 event_triggers_call+0x87/0xb0 trace_event_buffer_commit+0x1c4/0x210 xen_clocksource_get_cycles+0x15/0x20 ktime_get_ts64+0x51/0xf0 SyS_ppoll+0x160/0x1a0 SyS_ppoll+0x160/0x1a0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x41/0xa6 ... RIP: xennet_poll+0xae/0xd20 RSP: ffffb4f041933900 CR2: 0000000000000008 ---[ end trace f8601785b354351c ]--- xen frontend should remove the NAPIs for the old srings before live migration as the bond srings are destroyed There is a tiny window between the srings are set to NULL and the NAPIs are disabled, It is safe as the NAPI threads are still frozen at that time |
| CVE-2022-48968 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix potential memory leak in otx2_init_tc() In otx2_init_tc(), if rhashtable_init() failed, it does not free tc->tc_entries_bitmap which is allocated in otx2_tc_alloc_ent_bitmap(). |
| CVE-2022-48967 | In the Linux kernel, the following vulnerability has been resolved: NFC: nci: Bounds check struct nfc_target arrays While running under CONFIG_FORTIFY_SOURCE=y, syzkaller reported: memcpy: detected field-spanning write (size 129) of single field "target->sensf_res" at net/nfc/nci/ntf.c:260 (size 18) This appears to be a legitimate lack of bounds checking in nci_add_new_protocol(). Add the missing checks. |
| CVE-2022-48966 | In the Linux kernel, the following vulnerability has been resolved: net: mvneta: Prevent out of bounds read in mvneta_config_rss() The pp->indir[0] value comes from the user. It is passed to: if (cpu_online(pp->rxq_def)) inside the mvneta_percpu_elect() function. It needs bounds checkeding to ensure that it is not beyond the end of the cpu bitmap. |
| CVE-2022-48965 | In the Linux kernel, the following vulnerability has been resolved: gpio/rockchip: fix refcount leak in rockchip_gpiolib_register() The node returned by of_get_parent() with refcount incremented, of_node_put() needs be called when finish using it. So add it in the end of of_pinctrl_get(). |
| CVE-2022-48964 | In the Linux kernel, the following vulnerability has been resolved: ravb: Fix potential use-after-free in ravb_rx_gbeth() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free. |
| CVE-2022-48963 | In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix memory leak in ipc_mux_init() When failed to alloc ipc_mux->ul_adb.pp_qlt in ipc_mux_init(), ipc_mux is not released. |
| CVE-2022-48962 | In the Linux kernel, the following vulnerability has been resolved: net: hisilicon: Fix potential use-after-free in hisi_femac_rx() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free. |
| CVE-2022-48961 | In the Linux kernel, the following vulnerability has been resolved: net: mdio: fix unbalanced fwnode reference count in mdio_device_release() There is warning report about of_node refcount leak while probing mdio device: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@710700c0/ethernet@4 In of_mdiobus_register_device(), we increase fwnode refcount by fwnode_handle_get() before associating the of_node with mdio device, but it has never been decreased in normal path. Since that, in mdio_device_release(), it needs to call fwnode_handle_put() in addition instead of calling kfree() directly. After above, just calling mdio_device_free() in the error handle path of of_mdiobus_register_device() is enough to keep the refcount balanced. |
| CVE-2022-48960 | In the Linux kernel, the following vulnerability has been resolved: net: hisilicon: Fix potential use-after-free in hix5hd2_rx() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free. |
| CVE-2022-48959 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions() When dsa_devlink_region_create failed in sja1105_setup_devlink_regions(), priv->regions is not released. |
| CVE-2022-48958 | In the Linux kernel, the following vulnerability has been resolved: ethernet: aeroflex: fix potential skb leak in greth_init_rings() The greth_init_rings() function won't free the newly allocated skb when dma_mapping_error() returns error, so add dev_kfree_skb() to fix it. Compile tested only. |
| CVE-2022-48957 | In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove() The cmd_buff needs to be freed when error happened in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove(). |
| CVE-2022-48956 | In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid use-after-free in ip6_fragment() Blamed commit claimed rcu_read_lock() was held by ip6_fragment() callers. It seems to not be always true, at least for UDP stack. syzbot reported: BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:245 [inline] BUG: KASAN: use-after-free in ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 Read of size 8 at addr ffff88801d403e80 by task syz-executor.3/7618 CPU: 1 PID: 7618 Comm: syz-executor.3 Not tainted 6.1.0-rc6-syzkaller-00012-g4312098baf37 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x45d mm/kasan/report.c:395 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495 ip6_dst_idev include/net/ip6_fib.h:245 [inline] ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline] ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 sock_write_iter+0x295/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2191 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9ed/0xdd0 fs/read_write.c:584 ksys_write+0x1ec/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fde3588c0d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fde365b6168 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fde359ac050 RCX: 00007fde3588c0d9 RDX: 000000000000ffdc RSI: 00000000200000c0 RDI: 000000000000000a RBP: 00007fde358e7ae9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fde35acfb1f R14: 00007fde365b6300 R15: 0000000000022000 </TASK> Allocated by task 7618: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x82/0x90 mm/kasan/common.c:325 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3398 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc+0x2b4/0x3d0 mm/slub.c:3422 dst_alloc+0x14a/0x1f0 net/core/dst.c:92 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344 ip6_rt_pcpu_alloc net/ipv6/route.c:1369 [inline] rt6_make_pcpu_route net/ipv6/route.c:1417 [inline] ip6_pol_route+0x901/0x1190 net/ipv6/route.c:2254 pol_lookup_func include/net/ip6_fib.h:582 [inline] fib6_rule_lookup+0x52e/0x6f0 net/ipv6/fib6_rules.c:121 ip6_route_output_flags_noref+0x2e6/0x380 net/ipv6/route.c:2625 ip6_route_output_flags+0x76/0x320 net/ipv6/route.c:2638 ip6_route_output include/net/ip6_route.h:98 [inline] ip6_dst_lookup_tail+0x5ab/0x1620 net/ipv6/ip6_output.c:1092 ip6_dst_lookup_flow+0x90/0x1d0 net/ipv6/ip6_output.c:1222 ip6_sk_dst_lookup_flow+0x553/0x980 net/ipv6/ip6_output.c:1260 udpv6_sendmsg+0x151d/0x2c80 net/ipv6/udp.c:1554 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec n ---truncated--- |
| CVE-2022-48955 | In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: fix memory leak in tbnet_open() When tb_ring_alloc_rx() failed in tbnet_open(), ida that allocated in tb_xdomain_alloc_out_hopid() is not released. Add tb_xdomain_release_out_hopid() to the error path to release ida. |
| CVE-2022-48954 | In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix use-after-free in hsci KASAN found that addr was dereferenced after br2dev_event_work was freed. ================================================================== BUG: KASAN: use-after-free in qeth_l2_br2dev_worker+0x5ba/0x6b0 Read of size 1 at addr 00000000fdcea440 by task kworker/u760:4/540 CPU: 17 PID: 540 Comm: kworker/u760:4 Tainted: G E 6.1.0-20221128.rc7.git1.5aa3bed4ce83.300.fc36.s390x+kasan #1 Hardware name: IBM 8561 T01 703 (LPAR) Workqueue: 0.0.8000_event qeth_l2_br2dev_worker Call Trace: [<000000016944d4ce>] dump_stack_lvl+0xc6/0xf8 [<000000016942cd9c>] print_address_description.constprop.0+0x34/0x2a0 [<000000016942d118>] print_report+0x110/0x1f8 [<0000000167a7bd04>] kasan_report+0xfc/0x128 [<000000016938d79a>] qeth_l2_br2dev_worker+0x5ba/0x6b0 [<00000001673edd1e>] process_one_work+0x76e/0x1128 [<00000001673ee85c>] worker_thread+0x184/0x1098 [<000000016740718a>] kthread+0x26a/0x310 [<00000001672c606a>] __ret_from_fork+0x8a/0xe8 [<00000001694711da>] ret_from_fork+0xa/0x40 Allocated by task 108338: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 __kasan_kmalloc+0xa0/0xc0 qeth_l2_switchdev_event+0x25a/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Freed by task 540: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 kasan_save_free_info+0x4c/0x68 ____kasan_slab_free+0x14e/0x1a8 __kasan_slab_free+0x24/0x30 __kmem_cache_free+0x168/0x338 qeth_l2_br2dev_worker+0x154/0x6b0 process_one_work+0x76e/0x1128 worker_thread+0x184/0x1098 kthread+0x26a/0x310 __ret_from_fork+0x8a/0xe8 ret_from_fork+0xa/0x40 Last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 insert_work+0x56/0x2e8 __queue_work+0x4ce/0xd10 queue_work_on+0xf4/0x100 qeth_l2_switchdev_event+0x520/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Second to last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 kvfree_call_rcu+0xb2/0x760 kernfs_unlink_open_file+0x348/0x430 kernfs_fop_release+0xc2/0x320 __fput+0x1ae/0x768 task_work_run+0x1bc/0x298 exit_to_user_mode_prepare+0x1a0/0x1a8 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 The buggy address belongs to the object at 00000000fdcea400 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 64 bytes inside of 96-byte region [00000000fdcea400, 00000000fdcea460) The buggy address belongs to the physical page: page:000000005a9c26e8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xfdcea flags: 0x3ffff00000000200(slab|node=0|zone=1|lastcpupid=0x1ffff) raw: 3ffff00000000200 0000000000000000 0000000100000122 000000008008cc00 raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 00000000fdcea300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc 00000000fdcea380: fb fb fb fb fb fb f ---truncated--- |
| CVE-2022-48953 | In the Linux kernel, the following vulnerability has been resolved: rtc: cmos: Fix event handler registration ordering issue Because acpi_install_fixed_event_handler() enables the event automatically on success, it is incorrect to call it before the handler routine passed to it is ready to handle events. Unfortunately, the rtc-cmos driver does exactly the incorrect thing by calling cmos_wake_setup(), which passes rtc_handler() to acpi_install_fixed_event_handler(), before cmos_do_probe(), because rtc_handler() uses dev_get_drvdata() to get to the cmos object pointer and the driver data pointer is only populated in cmos_do_probe(). This leads to a NULL pointer dereference in rtc_handler() on boot if the RTC fixed event happens to be active at the init time. To address this issue, change the initialization ordering of the driver so that cmos_wake_setup() is always called after a successful cmos_do_probe() call. While at it, change cmos_pnp_probe() to call cmos_do_probe() after the initial if () statement used for computing the IRQ argument to be passed to cmos_do_probe() which is cleaner than calling it in each branch of that if () (local variable "irq" can be of type int, because it is passed to that function as an argument of type int). Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number of systems, because previously it only affected systems with ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that commit. |
| CVE-2022-48952 | In the Linux kernel, the following vulnerability has been resolved: PCI: mt7621: Add sentinel to quirks table Current driver is missing a sentinel in the struct soc_device_attribute array, which causes an oops when assessed by the soc_device_match(mt7621_pcie_quirks_match) call. This was only exposed once the CONFIG_SOC_MT7621 mt7621 soc_dev_attr was fixed to register the SOC as a device, in: commit 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early") Fix it by adding the required sentinel. |
| CVE-2022-48951 | In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx() The bounds checks in snd_soc_put_volsw_sx() are only being applied to the first channel, meaning it is possible to write out of bounds values to the second channel in stereo controls. Add appropriate checks. |
| CVE-2022-48950 | In the Linux kernel, the following vulnerability has been resolved: perf: Fix perf_pending_task() UaF Per syzbot it is possible for perf_pending_task() to run after the event is free()'d. There are two related but distinct cases: - the task_work was already queued before destroying the event; - destroying the event itself queues the task_work. The first cannot be solved using task_work_cancel() since perf_release() itself might be called from a task_work (____fput), which means the current->task_works list is already empty and task_work_cancel() won't be able to find the perf_pending_task() entry. The simplest alternative is extending the perf_event lifetime to cover the task_work. The second is just silly, queueing a task_work while you know the event is going away makes no sense and is easily avoided by re-arranging how the event is marked STATE_DEAD and ensuring it goes through STATE_OFF on the way down. |
| CVE-2022-48949 | In the Linux kernel, the following vulnerability has been resolved: igb: Initialize mailbox message for VF reset When a MAC address is not assigned to the VF, that portion of the message sent to the VF is not set. The memory, however, is allocated from the stack meaning that information may be leaked to the VM. Initialize the message buffer to 0 so that no information is passed to the VM in this case. |
| CVE-2022-48948 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Prevent buffer overflow in setup handler Setup function uvc_function_setup permits control transfer requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE), data stage handler for OUT transfer uses memcpy to copy req->actual bytes to uvc_event->data.data array of size 60. This may result in an overflow of 4 bytes. |
| CVE-2022-48947 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix u8 overflow By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@... |
| CVE-2022-48946 | In the Linux kernel, the following vulnerability has been resolved: udf: Fix preallocation discarding at indirect extent boundary When preallocation extent is the first one in the extent block, the code would corrupt extent tree header instead. Fix the problem and use udf_delete_aext() for deleting extent to avoid some code duplication. |
| CVE-2022-48945 | In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix compose size exceed boundary syzkaller found a bug: BUG: unable to handle page fault for address: ffffc9000a3b1000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10015f067 PMD 1121ca067 PTE 0 Oops: 0002 [#1] PREEMPT SMP CPU: 0 PID: 23489 Comm: vivid-000-vid-c Not tainted 6.1.0-rc1+ #512 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:memcpy_erms+0x6/0x10 [...] Call Trace: <TASK> ? tpg_fill_plane_buffer+0x856/0x15b0 vivid_fillbuff+0x8ac/0x1110 vivid_thread_vid_cap_tick+0x361/0xc90 vivid_thread_vid_cap+0x21a/0x3a0 kthread+0x143/0x180 ret_from_fork+0x1f/0x30 </TASK> This is because we forget to check boundary after adjust compose->height int V4L2_SEL_TGT_CROP case. Add v4l2_rect_map_inside() to fix this problem for this case. |
| CVE-2022-48944 | In the Linux kernel, the following vulnerability has been resolved: sched: Fix yet more sched_fork() races Where commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") fixed a fork race vs cgroup, it opened up a race vs syscalls by not placing the task on the runqueue before it gets exposed through the pidhash. Commit 13765de8148f ("sched/fair: Fix fault in reweight_entity") is trying to fix a single instance of this, instead fix the whole class of issues, effectively reverting this commit. |
| CVE-2022-48943 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: make apf token non-zero to fix bug In current async pagefault logic, when a page is ready, KVM relies on kvm_arch_can_dequeue_async_page_present() to determine whether to deliver a READY event to the Guest. This function test token value of struct kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a READY event is finished by Guest. If value is zero meaning that a READY event is done, so the KVM can deliver another. But the kvm_arch_setup_async_pf() may produce a valid token with zero value, which is confused with previous mention and may lead the loss of this READY event. This bug may cause task blocked forever in Guest: INFO: task stress:7532 blocked for more than 1254 seconds. Not tainted 5.10.0 #16 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack: 0 pid: 7532 ppid: 1409 flags:0x00000080 Call Trace: __schedule+0x1e7/0x650 schedule+0x46/0xb0 kvm_async_pf_task_wait_schedule+0xad/0xe0 ? exit_to_user_mode_prepare+0x60/0x70 __kvm_handle_async_pf+0x4f/0xb0 ? asm_exc_page_fault+0x8/0x30 exc_page_fault+0x6f/0x110 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x402d00 RSP: 002b:00007ffd31912500 EFLAGS: 00010206 RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0 RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0 RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086 R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000 R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000 |
| CVE-2022-48942 | In the Linux kernel, the following vulnerability has been resolved: hwmon: Handle failure to register sensor with thermal zone correctly If an attempt is made to a sensor with a thermal zone and it fails, the call to devm_thermal_zone_of_sensor_register() may return -ENODEV. This may result in crashes similar to the following. Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd ... Internal error: Oops: 96000021 [#1] PREEMPT SMP ... pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x18/0x60 lr : thermal_zone_device_update+0x40/0x2e0 sp : ffff800014c4fc60 x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790 x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000 x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000 x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040 x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd Call trace: mutex_lock+0x18/0x60 hwmon_notify_event+0xfc/0x110 0xffffdde1cb7a0a90 0xffffdde1cb7a0b7c irq_thread_fn+0x2c/0xa0 irq_thread+0x134/0x240 kthread+0x178/0x190 ret_from_fork+0x10/0x20 Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02) Jon Hunter reports that the exact call sequence is: hwmon_notify_event() --> hwmon_thermal_notify() --> thermal_zone_device_update() --> update_temperature() --> mutex_lock() The hwmon core needs to handle all errors returned from calls to devm_thermal_zone_of_sensor_register(). If the call fails with -ENODEV, report that the sensor was not attached to a thermal zone but continue to register the hwmon device. |
| CVE-2022-48941 | In the Linux kernel, the following vulnerability has been resolved: ice: fix concurrent reset and removal of VFs Commit c503e63200c6 ("ice: Stop processing VF messages during teardown") introduced a driver state flag, ICE_VF_DEINIT_IN_PROGRESS, which is intended to prevent some issues with concurrently handling messages from VFs while tearing down the VFs. This change was motivated by crashes caused while tearing down and bringing up VFs in rapid succession. It turns out that the fix actually introduces issues with the VF driver caused because the PF no longer responds to any messages sent by the VF during its .remove routine. This results in the VF potentially removing its DMA memory before the PF has shut down the device queues. Additionally, the fix doesn't actually resolve concurrency issues within the ice driver. It is possible for a VF to initiate a reset just prior to the ice driver removing VFs. This can result in the remove task concurrently operating while the VF is being reset. This results in similar memory corruption and panics purportedly fixed by that commit. Fix this concurrency at its root by protecting both the reset and removal flows using the existing VF cfg_lock. This ensures that we cannot remove the VF while any outstanding critical tasks such as a virtchnl message or a reset are occurring. This locking change also fixes the root cause originally fixed by commit c503e63200c6 ("ice: Stop processing VF messages during teardown"), so we can simply revert it. Note that I kept these two changes together because simply reverting the original commit alone would leave the driver vulnerable to worse race conditions. |
| CVE-2022-48940 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix crash due to incorrect copy_map_value When both bpf_spin_lock and bpf_timer are present in a BPF map value, copy_map_value needs to skirt both objects when copying a value into and out of the map. However, the current code does not set both s_off and t_off in copy_map_value, which leads to a crash when e.g. bpf_spin_lock is placed in map value with bpf_timer, as bpf_map_update_elem call will be able to overwrite the other timer object. When the issue is not fixed, an overwriting can produce the following splat: [root@(none) bpf]# ./test_progs -t timer_crash [ 15.930339] bpf_testmod: loading out-of-tree module taints kernel. [ 16.037849] ================================================================== [ 16.038458] BUG: KASAN: user-memory-access in __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.038944] Write of size 8 at addr 0000000000043ec0 by task test_progs/325 [ 16.039399] [ 16.039514] CPU: 0 PID: 325 Comm: test_progs Tainted: G OE 5.16.0+ #278 [ 16.039983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.15.0-1 04/01/2014 [ 16.040485] Call Trace: [ 16.040645] <TASK> [ 16.040805] dump_stack_lvl+0x59/0x73 [ 16.041069] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.041427] kasan_report.cold+0x116/0x11b [ 16.041673] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042040] __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042328] ? memcpy+0x39/0x60 [ 16.042552] ? pv_hash+0xd0/0xd0 [ 16.042785] ? lockdep_hardirqs_off+0x95/0xd0 [ 16.043079] __bpf_spin_lock_irqsave+0xdf/0xf0 [ 16.043366] ? bpf_get_current_comm+0x50/0x50 [ 16.043608] ? jhash+0x11a/0x270 [ 16.043848] bpf_timer_cancel+0x34/0xe0 [ 16.044119] bpf_prog_c4ea1c0f7449940d_sys_enter+0x7c/0x81 [ 16.044500] bpf_trampoline_6442477838_0+0x36/0x1000 [ 16.044836] __x64_sys_nanosleep+0x5/0x140 [ 16.045119] do_syscall_64+0x59/0x80 [ 16.045377] ? lock_is_held_type+0xe4/0x140 [ 16.045670] ? irqentry_exit_to_user_mode+0xa/0x40 [ 16.046001] ? mark_held_locks+0x24/0x90 [ 16.046287] ? asm_exc_page_fault+0x1e/0x30 [ 16.046569] ? asm_exc_page_fault+0x8/0x30 [ 16.046851] ? lockdep_hardirqs_on+0x7e/0x100 [ 16.047137] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.047405] RIP: 0033:0x7f9e4831718d [ 16.047602] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 [ 16.048764] RSP: 002b:00007fff488086b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000023 [ 16.049275] RAX: ffffffffffffffda RBX: 00007f9e48683740 RCX: 00007f9e4831718d [ 16.049747] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007fff488086d0 [ 16.050225] RBP: 00007fff488086f0 R08: 00007fff488085d7 R09: 00007f9e4cb594a0 [ 16.050648] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f9e484cde30 [ 16.051124] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 16.051608] </TASK> [ 16.051762] ================================================================== |
| CVE-2022-48939 | In the Linux kernel, the following vulnerability has been resolved: bpf: Add schedule points in batch ops syzbot reported various soft lockups caused by bpf batch operations. INFO: task kworker/1:1:27 blocked for more than 140 seconds. INFO: task hung in rcu_barrier Nothing prevents batch ops to process huge amount of data, we need to add schedule points in them. Note that maybe_wait_bpf_programs(map) calls from generic_map_delete_batch() can be factorized by moving the call after the loop. This will be done later in -next tree once we get this fix merged, unless there is strong opinion doing this optimization sooner. |
| CVE-2022-48938 | In the Linux kernel, the following vulnerability has been resolved: CDC-NCM: avoid overflow in sanity checking A broken device may give an extreme offset like 0xFFF0 and a reasonable length for a fragment. In the sanity check as formulated now, this will create an integer overflow, defeating the sanity check. Both offset and offset + len need to be checked in such a manner that no overflow can occur. And those quantities should be unsigned. |
| CVE-2022-48937 | In the Linux kernel, the following vulnerability has been resolved: io_uring: add a schedule point in io_add_buffers() Looping ~65535 times doing kmalloc() calls can trigger soft lockups, especially with DEBUG features (like KASAN). [ 253.536212] watchdog: BUG: soft lockup - CPU#64 stuck for 26s! [b219417889:12575] [ 253.544433] Modules linked in: vfat fat i2c_mux_pca954x i2c_mux spidev cdc_acm xhci_pci xhci_hcd sha3_generic gq(O) [ 253.544451] CPU: 64 PID: 12575 Comm: b219417889 Tainted: G S O 5.17.0-smp-DEV #801 [ 253.544457] RIP: 0010:kernel_text_address (./include/asm-generic/sections.h:192 ./include/linux/kallsyms.h:29 kernel/extable.c:67 kernel/extable.c:98) [ 253.544464] Code: 0f 93 c0 48 c7 c1 e0 63 d7 a4 48 39 cb 0f 92 c1 20 c1 0f b6 c1 5b 5d c3 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 53 48 89 fb <48> c7 c0 00 00 80 a0 41 be 01 00 00 00 48 39 c7 72 0c 48 c7 c0 40 [ 253.544468] RSP: 0018:ffff8882d8baf4c0 EFLAGS: 00000246 [ 253.544471] RAX: 1ffff1105b175e00 RBX: ffffffffa13ef09a RCX: 00000000a13ef001 [ 253.544474] RDX: ffffffffa13ef09a RSI: ffff8882d8baf558 RDI: ffffffffa13ef09a [ 253.544476] RBP: ffff8882d8baf4d8 R08: ffff8882d8baf5e0 R09: 0000000000000004 [ 253.544479] R10: ffff8882d8baf5e8 R11: ffffffffa0d59a50 R12: ffff8882eab20380 [ 253.544481] R13: ffffffffa0d59a50 R14: dffffc0000000000 R15: 1ffff1105b175eb0 [ 253.544483] FS: 00000000016d3380(0000) GS:ffff88af48c00000(0000) knlGS:0000000000000000 [ 253.544486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 253.544488] CR2: 00000000004af0f0 CR3: 00000002eabfa004 CR4: 00000000003706e0 [ 253.544491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 253.544492] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 253.544494] Call Trace: [ 253.544496] <TASK> [ 253.544498] ? io_queue_sqe (fs/io_uring.c:7143) [ 253.544505] __kernel_text_address (kernel/extable.c:78) [ 253.544508] unwind_get_return_address (arch/x86/kernel/unwind_frame.c:19) [ 253.544514] arch_stack_walk (arch/x86/kernel/stacktrace.c:27) [ 253.544517] ? io_queue_sqe (fs/io_uring.c:7143) [ 253.544521] stack_trace_save (kernel/stacktrace.c:123) [ 253.544527] ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515) [ 253.544531] ? ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515) [ 253.544533] ? __kasan_kmalloc (mm/kasan/common.c:524) [ 253.544535] ? kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567) [ 253.544541] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828) [ 253.544544] ? __io_queue_sqe (fs/io_uring.c:?) [ 253.544551] __kasan_kmalloc (mm/kasan/common.c:524) [ 253.544553] kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567) [ 253.544556] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828) [ 253.544560] io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828) [ 253.544564] ? __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) [ 253.544567] ? __kasan_slab_alloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) [ 253.544569] ? kmem_cache_alloc_bulk (mm/slab.h:732 mm/slab.c:3546) [ 253.544573] ? __io_alloc_req_refill (fs/io_uring.c:2078) [ 253.544578] ? io_submit_sqes (fs/io_uring.c:7441) [ 253.544581] ? __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uring.c:10096) [ 253.544584] ? __x64_sys_io_uring_enter (fs/io_uring.c:10096) [ 253.544587] ? do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [ 253.544590] ? entry_SYSCALL_64_after_hwframe (??:?) [ 253.544596] __io_queue_sqe (fs/io_uring.c:?) [ 253.544600] io_queue_sqe (fs/io_uring.c:7143) [ 253.544603] io_submit_sqe (fs/io_uring.c:?) [ 253.544608] io_submit_sqes (fs/io_uring.c:?) [ 253.544612] __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uri ---truncated--- |
| CVE-2022-48935 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unregister flowtable hooks on netns exit Unregister flowtable hooks before they are releases via nf_tables_flowtable_destroy() otherwise hook core reports UAF. BUG: KASAN: use-after-free in nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142 Read of size 4 at addr ffff8880736f7438 by task syz-executor579/3666 CPU: 0 PID: 3666 Comm: syz-executor579 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] __dump_stack lib/dump_stack.c:88 [inline] lib/dump_stack.c:106 dump_stack_lvl+0x1dc/0x2d8 lib/dump_stack.c:106 lib/dump_stack.c:106 print_address_description+0x65/0x380 mm/kasan/report.c:247 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] __kasan_report mm/kasan/report.c:433 [inline] mm/kasan/report.c:450 kasan_report+0x19a/0x1f0 mm/kasan/report.c:450 mm/kasan/report.c:450 nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142 __nf_register_net_hook+0x27e/0x8d0 net/netfilter/core.c:429 net/netfilter/core.c:429 nf_register_net_hook+0xaa/0x180 net/netfilter/core.c:571 net/netfilter/core.c:571 nft_register_flowtable_net_hooks+0x3c5/0x730 net/netfilter/nf_tables_api.c:7232 net/netfilter/nf_tables_api.c:7232 nf_tables_newflowtable+0x2022/0x2cf0 net/netfilter/nf_tables_api.c:7430 net/netfilter/nf_tables_api.c:7430 nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] net/netfilter/nfnetlink.c:652 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] net/netfilter/nfnetlink.c:652 nfnetlink_rcv+0x10e6/0x2550 net/netfilter/nfnetlink.c:652 net/netfilter/nfnetlink.c:652 __nft_release_hook() calls nft_unregister_flowtable_net_hooks() which only unregisters the hooks, then after RCU grace period, it is guaranteed that no packets add new entries to the flowtable (no flow offload rules and flowtable hooks are reachable from packet path), so it is safe to call nf_flow_table_free() which cleans up the remaining entries from the flowtable (both software and hardware) and it unbinds the flow_block. |
| CVE-2022-48934 | In the Linux kernel, the following vulnerability has been resolved: nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac() ida_simple_get() returns an id between min (0) and max (NFP_MAX_MAC_INDEX) inclusive. So NFP_MAX_MAC_INDEX (0xff) is a valid id. In order for the error handling path to work correctly, the 'invalid' value for 'ida_idx' should not be in the 0..NFP_MAX_MAC_INDEX range, inclusive. So set it to -1. |
| CVE-2022-48933 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix memory leak during stateful obj update stateful objects can be updated from the control plane. The transaction logic allocates a temporary object for this purpose. The ->init function was called for this object, so plain kfree() leaks resources. We must call ->destroy function of the object. nft_obj_destroy does this, but it also decrements the module refcount, but the update path doesn't increment it. To avoid special-casing the update object release, do module_get for the update case too and release it via nft_obj_destroy(). |
| CVE-2022-48932 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: DR, Fix slab-out-of-bounds in mlx5_cmd_dr_create_fte When adding a rule with 32 destinations, we hit the following out-of-band access issue: BUG: KASAN: slab-out-of-bounds in mlx5_cmd_dr_create_fte+0x18ee/0x1e70 This patch fixes the issue by both increasing the allocated buffers to accommodate for the needed actions and by checking the number of actions to prevent this issue when a rule with too many actions is provided. |
| CVE-2022-48931 | In the Linux kernel, the following vulnerability has been resolved: configfs: fix a race in configfs_{,un}register_subsystem() When configfs_register_subsystem() or configfs_unregister_subsystem() is executing link_group() or unlink_group(), it is possible that two processes add or delete list concurrently. Some unfortunate interleavings of them can cause kernel panic. One of cases is: A --> B --> C --> D A <-- B <-- C <-- D delete list_head *B | delete list_head *C --------------------------------|----------------------------------- configfs_unregister_subsystem | configfs_unregister_subsystem unlink_group | unlink_group unlink_obj | unlink_obj list_del_init | list_del_init __list_del_entry | __list_del_entry __list_del | __list_del // next == C | next->prev = prev | | next->prev = prev prev->next = next | | // prev == B | prev->next = next Fix this by adding mutex when calling link_group() or unlink_group(), but parent configfs_subsystem is NULL when config_item is root. So I create a mutex configfs_subsystem_mutex. |
| CVE-2022-48930 | In the Linux kernel, the following vulnerability has been resolved: RDMA/ib_srp: Fix a deadlock Remove the flush_workqueue(system_long_wq) call since flushing system_long_wq is deadlock-prone and since that call is redundant with a preceding cancel_work_sync() |
| CVE-2022-48929 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix crash due to out of bounds access into reg2btf_ids. When commit e6ac2450d6de ("bpf: Support bpf program calling kernel function") added kfunc support, it defined reg2btf_ids as a cheap way to translate the verifier reg type to the appropriate btf_vmlinux BTF ID, however commit c25b2ae13603 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL") moved the __BPF_REG_TYPE_MAX from the last member of bpf_reg_type enum to after the base register types, and defined other variants using type flag composition. However, now, the direct usage of reg->type to index into reg2btf_ids may no longer fall into __BPF_REG_TYPE_MAX range, and hence lead to out of bounds access and kernel crash on dereference of bad pointer. |
| CVE-2022-48928 | In the Linux kernel, the following vulnerability has been resolved: iio: adc: men_z188_adc: Fix a resource leak in an error handling path If iio_device_register() fails, a previous ioremap() is left unbalanced. Update the error handling path and add the missing iounmap() call, as already done in the remove function. |
| CVE-2022-48927 | In the Linux kernel, the following vulnerability has been resolved: iio: adc: tsc2046: fix memory corruption by preventing array overflow On one side we have indio_dev->num_channels includes all physical channels + timestamp channel. On other side we have an array allocated only for physical channels. So, fix memory corruption by ARRAY_SIZE() instead of num_channels variable. Note the first case is a cleanup rather than a fix as the software timestamp channel bit in active_scanmask is never set by the IIO core. |
| CVE-2022-48926 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: rndis: add spinlock for rndis response list There's no lock for rndis response list. It could cause list corruption if there're two different list_add at the same time like below. It's better to add in rndis_add_response / rndis_free_response / rndis_get_next_response to prevent any race condition on response list. [ 361.894299] [1: irq/191-dwc3:16979] list_add corruption. next->prev should be prev (ffffff80651764d0), but was ffffff883dc36f80. (next=ffffff80651764d0). [ 361.904380] [1: irq/191-dwc3:16979] Call trace: [ 361.904391] [1: irq/191-dwc3:16979] __list_add_valid+0x74/0x90 [ 361.904401] [1: irq/191-dwc3:16979] rndis_msg_parser+0x168/0x8c0 [ 361.904409] [1: irq/191-dwc3:16979] rndis_command_complete+0x24/0x84 [ 361.904417] [1: irq/191-dwc3:16979] usb_gadget_giveback_request+0x20/0xe4 [ 361.904426] [1: irq/191-dwc3:16979] dwc3_gadget_giveback+0x44/0x60 [ 361.904434] [1: irq/191-dwc3:16979] dwc3_ep0_complete_data+0x1e8/0x3a0 [ 361.904442] [1: irq/191-dwc3:16979] dwc3_ep0_interrupt+0x29c/0x3dc [ 361.904450] [1: irq/191-dwc3:16979] dwc3_process_event_entry+0x78/0x6cc [ 361.904457] [1: irq/191-dwc3:16979] dwc3_process_event_buf+0xa0/0x1ec [ 361.904465] [1: irq/191-dwc3:16979] dwc3_thread_interrupt+0x34/0x5c |
| CVE-2022-48925 | In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Do not change route.addr.src_addr outside state checks If the state is not idle then resolve_prepare_src() should immediately fail and no change to global state should happen. However, it unconditionally overwrites the src_addr trying to build a temporary any address. For instance if the state is already RDMA_CM_LISTEN then this will corrupt the src_addr and would cause the test in cma_cancel_operation(): if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev) Which would manifest as this trace from syzkaller: BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26 Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204 CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416 __list_add_valid+0x93/0xa0 lib/list_debug.c:26 __list_add include/linux/list.h:67 [inline] list_add_tail include/linux/list.h:100 [inline] cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline] rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751 ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102 ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xa30 fs/read_write.c:603 ksys_write+0x1ee/0x250 fs/read_write.c:658 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae This is indicating that an rdma_id_private was destroyed without doing cma_cancel_listens(). Instead of trying to re-use the src_addr memory to indirectly create an any address derived from the dst build one explicitly on the stack and bind to that as any other normal flow would do. rdma_bind_addr() will copy it over the src_addr once it knows the state is valid. This is similar to commit bc0bdc5afaa7 ("RDMA/cma: Do not change route.addr.src_addr.ss_family") |
| CVE-2022-48924 | In the Linux kernel, the following vulnerability has been resolved: thermal: int340x: fix memory leak in int3400_notify() It is easy to hit the below memory leaks in my TigerLake platform: unreferenced object 0xffff927c8b91dbc0 (size 32): comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s) hex dump (first 32 bytes): 4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The 72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk. backtrace: [<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0 [<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0 [<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70 [<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal] [<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71 [<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30 [<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0 [<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0 [<ffffffff9c2cb4dd>] kthread+0xfd/0x130 [<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30 Fix it by calling kfree() accordingly. |
| CVE-2022-48923 | In the Linux kernel, the following vulnerability has been resolved: btrfs: prevent copying too big compressed lzo segment Compressed length can be corrupted to be a lot larger than memory we have allocated for buffer. This will cause memcpy in copy_compressed_segment to write outside of allocated memory. This mostly results in stuck read syscall but sometimes when using btrfs send can get #GP kernel: general protection fault, probably for non-canonical address 0x841551d5c1000: 0000 [#1] PREEMPT SMP NOPTI kernel: CPU: 17 PID: 264 Comm: kworker/u256:7 Tainted: P OE 5.17.0-rc2-1 #12 kernel: Workqueue: btrfs-endio btrfs_work_helper [btrfs] kernel: RIP: 0010:lzo_decompress_bio (./include/linux/fortify-string.h:225 fs/btrfs/lzo.c:322 fs/btrfs/lzo.c:394) btrfs Code starting with the faulting instruction =========================================== 0:* 48 8b 06 mov (%rsi),%rax <-- trapping instruction 3: 48 8d 79 08 lea 0x8(%rcx),%rdi 7: 48 83 e7 f8 and $0xfffffffffffffff8,%rdi b: 48 89 01 mov %rax,(%rcx) e: 44 89 f0 mov %r14d,%eax 11: 48 8b 54 06 f8 mov -0x8(%rsi,%rax,1),%rdx kernel: RSP: 0018:ffffb110812efd50 EFLAGS: 00010212 kernel: RAX: 0000000000001000 RBX: 000000009ca264c8 RCX: ffff98996e6d8ff8 kernel: RDX: 0000000000000064 RSI: 000841551d5c1000 RDI: ffffffff9500435d kernel: RBP: ffff989a3be856c0 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 0000000000000000 R11: 0000000000001000 R12: ffff98996e6d8000 kernel: R13: 0000000000000008 R14: 0000000000001000 R15: 000841551d5c1000 kernel: FS: 0000000000000000(0000) GS:ffff98a09d640000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00001e9f984d9ea8 CR3: 000000014971a000 CR4: 00000000003506e0 kernel: Call Trace: kernel: <TASK> kernel: end_compressed_bio_read (fs/btrfs/compression.c:104 fs/btrfs/compression.c:1363 fs/btrfs/compression.c:323) btrfs kernel: end_workqueue_fn (fs/btrfs/disk-io.c:1923) btrfs kernel: btrfs_work_helper (fs/btrfs/async-thread.c:326) btrfs kernel: process_one_work (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:212 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2312) kernel: worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2455) kernel: ? process_one_work (kernel/workqueue.c:2397) kernel: kthread (kernel/kthread.c:377) kernel: ? kthread_complete_and_exit (kernel/kthread.c:332) kernel: ret_from_fork (arch/x86/entry/entry_64.S:301) kernel: </TASK> |
| CVE-2022-48922 | In the Linux kernel, the following vulnerability has been resolved: riscv: fix oops caused by irqsoff latency tracer The trace_hardirqs_{on,off}() require the caller to setup frame pointer properly. This because these two functions use macro 'CALLER_ADDR1' (aka. __builtin_return_address(1)) to acquire caller info. If the $fp is used for other purpose, the code generated this macro (as below) could trigger memory access fault. 0xffffffff8011510e <+80>: ld a1,-16(s0) 0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here The oops message during booting if compiled with 'irqoff' tracer enabled: [ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 [ 0.041925][ T0] Oops [#1] [ 0.042063][ T0] Modules linked in: [ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29 [ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT) [ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2 [ 0.044601][ T0] ra : restore_all+0x12/0x6e [ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0 [ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020 [ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0 [ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100 [ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45 [ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50 [ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8 [ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000 [ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000 [ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368 [ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d [ 0.046402][ T0] [<ffffffff80003b94>] restore_all+0x12/0x6e This because the $fp(aka. $s0) register is not used as frame pointer in the assembly entry code. resume_kernel: REG_L s0, TASK_TI_PREEMPT_COUNT(tp) bnez s0, restore_all REG_L s0, TASK_TI_FLAGS(tp) andi s0, s0, _TIF_NEED_RESCHED beqz s0, restore_all call preempt_schedule_irq j restore_all To fix above issue, here we add one extra level wrapper for function trace_hardirqs_{on,off}() so they can be safely called by low level entry code. |
| CVE-2022-48921 | In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix fault in reweight_entity Syzbot found a GPF in reweight_entity. This has been bisected to commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") There is a race between sched_post_fork() and setpriority(PRIO_PGRP) within a thread group that causes a null-ptr-deref in reweight_entity() in CFS. The scenario is that the main process spawns number of new threads, which then call setpriority(PRIO_PGRP, 0, -20), wait, and exit. For each of the new threads the copy_process() gets invoked, which adds the new task_struct and calls sched_post_fork() for it. In the above scenario there is a possibility that setpriority(PRIO_PGRP) and set_one_prio() will be called for a thread in the group that is just being created by copy_process(), and for which the sched_post_fork() has not been executed yet. This will trigger a null pointer dereference in reweight_entity(), as it will try to access the run queue pointer, which hasn't been set. Before the mentioned change the cfs_rq pointer for the task has been set in sched_fork(), which is called much earlier in copy_process(), before the new task is added to the thread_group. Now it is done in the sched_post_fork(), which is called after that. To fix the issue the remove the update_load param from the update_load param() function and call reweight_task() only if the task flag doesn't have the TASK_NEW flag set. |
| CVE-2022-48920 | In the Linux kernel, the following vulnerability has been resolved: btrfs: get rid of warning on transaction commit when using flushoncommit When using the flushoncommit mount option, during almost every transaction commit we trigger a warning from __writeback_inodes_sb_nr(): $ cat fs/fs-writeback.c: (...) static void __writeback_inodes_sb_nr(struct super_block *sb, ... { (...) WARN_ON(!rwsem_is_locked(&sb->s_umount)); (...) } (...) The trace produced in dmesg looks like the following: [947.473890] WARNING: CPU: 5 PID: 930 at fs/fs-writeback.c:2610 __writeback_inodes_sb_nr+0x7e/0xb3 [947.481623] Modules linked in: nfsd nls_cp437 cifs asn1_decoder cifs_arc4 fscache cifs_md4 ipmi_ssif [947.489571] CPU: 5 PID: 930 Comm: btrfs-transacti Not tainted 95.16.3-srb-asrock-00001-g36437ad63879 #186 [947.497969] RIP: 0010:__writeback_inodes_sb_nr+0x7e/0xb3 [947.502097] Code: 24 10 4c 89 44 24 18 c6 (...) [947.519760] RSP: 0018:ffffc90000777e10 EFLAGS: 00010246 [947.523818] RAX: 0000000000000000 RBX: 0000000000963300 RCX: 0000000000000000 [947.529765] RDX: 0000000000000000 RSI: 000000000000fa51 RDI: ffffc90000777e50 [947.535740] RBP: ffff888101628a90 R08: ffff888100955800 R09: ffff888100956000 [947.541701] R10: 0000000000000002 R11: 0000000000000001 R12: ffff888100963488 [947.547645] R13: ffff888100963000 R14: ffff888112fb7200 R15: ffff888100963460 [947.553621] FS: 0000000000000000(0000) GS:ffff88841fd40000(0000) knlGS:0000000000000000 [947.560537] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [947.565122] CR2: 0000000008be50c4 CR3: 000000000220c000 CR4: 00000000001006e0 [947.571072] Call Trace: [947.572354] <TASK> [947.573266] btrfs_commit_transaction+0x1f1/0x998 [947.576785] ? start_transaction+0x3ab/0x44e [947.579867] ? schedule_timeout+0x8a/0xdd [947.582716] transaction_kthread+0xe9/0x156 [947.585721] ? btrfs_cleanup_transaction.isra.0+0x407/0x407 [947.590104] kthread+0x131/0x139 [947.592168] ? set_kthread_struct+0x32/0x32 [947.595174] ret_from_fork+0x22/0x30 [947.597561] </TASK> [947.598553] ---[ end trace 644721052755541c ]--- This is because we started using writeback_inodes_sb() to flush delalloc when committing a transaction (when using -o flushoncommit), in order to avoid deadlocks with filesystem freeze operations. This change was made by commit ce8ea7cc6eb313 ("btrfs: don't call btrfs_start_delalloc_roots in flushoncommit"). After that change we started producing that warning, and every now and then a user reports this since the warning happens too often, it spams dmesg/syslog, and a user is unsure if this reflects any problem that might compromise the filesystem's reliability. We can not just lock the sb->s_umount semaphore before calling writeback_inodes_sb(), because that would at least deadlock with filesystem freezing, since at fs/super.c:freeze_super() sync_filesystem() is called while we are holding that semaphore in write mode, and that can trigger a transaction commit, resulting in a deadlock. It would also trigger the same type of deadlock in the unmount path. Possibly, it could also introduce some other locking dependencies that lockdep would report. To fix this call try_to_writeback_inodes_sb() instead of writeback_inodes_sb(), because that will try to read lock sb->s_umount and then will only call writeback_inodes_sb() if it was able to lock it. This is fine because the cases where it can't read lock sb->s_umount are during a filesystem unmount or during a filesystem freeze - in those cases sb->s_umount is write locked and sync_filesystem() is called, which calls writeback_inodes_sb(). In other words, in all cases where we can't take a read lock on sb->s_umount, writeback is already being triggered elsewhere. An alternative would be to call btrfs_start_delalloc_roots() with a number of pages different from LONG_MAX, for example matching the number of delalloc bytes we currently have, in ---truncated--- |
| CVE-2022-48919 | In the Linux kernel, the following vulnerability has been resolved: cifs: fix double free race when mount fails in cifs_get_root() When cifs_get_root() fails during cifs_smb3_do_mount() we call deactivate_locked_super() which eventually will call delayed_free() which will free the context. In this situation we should not proceed to enter the out: section in cifs_smb3_do_mount() and free the same resources a second time. [Thu Feb 10 12:59:06 2022] BUG: KASAN: use-after-free in rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] Read of size 8 at addr ffff888364f4d110 by task swapper/1/0 [Thu Feb 10 12:59:06 2022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G OE 5.17.0-rc3+ #4 [Thu Feb 10 12:59:06 2022] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019 [Thu Feb 10 12:59:06 2022] Call Trace: [Thu Feb 10 12:59:06 2022] <IRQ> [Thu Feb 10 12:59:06 2022] dump_stack_lvl+0x5d/0x78 [Thu Feb 10 12:59:06 2022] print_address_description.constprop.0+0x24/0x150 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] kasan_report.cold+0x7d/0x117 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] __asan_load8+0x86/0xa0 [Thu Feb 10 12:59:06 2022] rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] rcu_core+0x547/0xca0 [Thu Feb 10 12:59:06 2022] ? call_rcu+0x3c0/0x3c0 [Thu Feb 10 12:59:06 2022] ? __this_cpu_preempt_check+0x13/0x20 [Thu Feb 10 12:59:06 2022] ? lock_is_held_type+0xea/0x140 [Thu Feb 10 12:59:06 2022] rcu_core_si+0xe/0x10 [Thu Feb 10 12:59:06 2022] __do_softirq+0x1d4/0x67b [Thu Feb 10 12:59:06 2022] __irq_exit_rcu+0x100/0x150 [Thu Feb 10 12:59:06 2022] irq_exit_rcu+0xe/0x30 [Thu Feb 10 12:59:06 2022] sysvec_hyperv_stimer0+0x9d/0xc0 ... [Thu Feb 10 12:59:07 2022] Freed by task 58179: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] kasan_set_track+0x25/0x30 [Thu Feb 10 12:59:07 2022] kasan_set_free_info+0x24/0x40 [Thu Feb 10 12:59:07 2022] ____kasan_slab_free+0x137/0x170 [Thu Feb 10 12:59:07 2022] __kasan_slab_free+0x12/0x20 [Thu Feb 10 12:59:07 2022] slab_free_freelist_hook+0xb3/0x1d0 [Thu Feb 10 12:59:07 2022] kfree+0xcd/0x520 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0x149/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae [Thu Feb 10 12:59:07 2022] Last potentially related work creation: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] __kasan_record_aux_stack+0xb6/0xc0 [Thu Feb 10 12:59:07 2022] kasan_record_aux_stack_noalloc+0xb/0x10 [Thu Feb 10 12:59:07 2022] call_rcu+0x76/0x3c0 [Thu Feb 10 12:59:07 2022] cifs_umount+0xce/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] cifs_kill_sb+0xc8/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] deactivate_locked_super+0x5d/0xd0 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0xab9/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2022-48918 | In the Linux kernel, the following vulnerability has been resolved: iwlwifi: mvm: check debugfs_dir ptr before use When "debugfs=off" is used on the kernel command line, iwiwifi's mvm module uses an invalid/unchecked debugfs_dir pointer and causes a BUG: BUG: kernel NULL pointer dereference, address: 000000000000004f #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 503 Comm: modprobe Tainted: G W 5.17.0-rc5 #7 Hardware name: Dell Inc. Inspiron 15 5510/076F7Y, BIOS 2.4.1 11/05/2021 RIP: 0010:iwl_mvm_dbgfs_register+0x692/0x700 [iwlmvm] Code: 69 a0 be 80 01 00 00 48 c7 c7 50 73 6a a0 e8 95 cf ee e0 48 8b 83 b0 1e 00 00 48 c7 c2 54 73 6a a0 be 64 00 00 00 48 8d 7d 8c <48> 8b 48 50 e8 15 22 07 e1 48 8b 43 28 48 8d 55 8c 48 c7 c7 5f 73 RSP: 0018:ffffc90000a0ba68 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff88817d6e3328 RCX: ffff88817d6e3328 RDX: ffffffffa06a7354 RSI: 0000000000000064 RDI: ffffc90000a0ba6c RBP: ffffc90000a0bae0 R08: ffffffff824e4880 R09: ffffffffa069d620 R10: ffffc90000a0ba00 R11: ffffffffffffffff R12: 0000000000000000 R13: ffffc90000a0bb28 R14: ffff88817d6e3328 R15: ffff88817d6e3320 FS: 00007f64dd92d740(0000) GS:ffff88847f640000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000004f CR3: 000000016fc79001 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> ? iwl_mvm_mac_setup_register+0xbdc/0xda0 [iwlmvm] iwl_mvm_start_post_nvm+0x71/0x100 [iwlmvm] iwl_op_mode_mvm_start+0xab8/0xb30 [iwlmvm] _iwl_op_mode_start+0x6f/0xd0 [iwlwifi] iwl_opmode_register+0x6a/0xe0 [iwlwifi] ? 0xffffffffa0231000 iwl_mvm_init+0x35/0x1000 [iwlmvm] ? 0xffffffffa0231000 do_one_initcall+0x5a/0x1b0 ? kmem_cache_alloc+0x1e5/0x2f0 ? do_init_module+0x1e/0x220 do_init_module+0x48/0x220 load_module+0x2602/0x2bc0 ? __kernel_read+0x145/0x2e0 ? kernel_read_file+0x229/0x290 __do_sys_finit_module+0xc5/0x130 ? __do_sys_finit_module+0xc5/0x130 __x64_sys_finit_module+0x13/0x20 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f64dda564dd Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 29 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdba393f88 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f64dda564dd RDX: 0000000000000000 RSI: 00005575399e2ab2 RDI: 0000000000000001 RBP: 000055753a91c5e0 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000001 R11: 0000000000000246 R12: 00005575399e2ab2 R13: 000055753a91ceb0 R14: 0000000000000000 R15: 000055753a923018 </TASK> Modules linked in: btintel(+) btmtk bluetooth vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic iwlmvm(+) snd_sof_pci_intel_tgl mac80211 snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation soundwire_cadence soundwire_bus snd_sof_intel_hda snd_sof_pci snd_sof snd_sof_xtensa_dsp snd_soc_hdac_hda snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core btrfs snd_compress snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec raid6_pq iwlwifi snd_hda_core snd_pcm snd_timer snd soundcore cfg80211 intel_ish_ipc(+) thunderbolt rfkill intel_ishtp ucsi_acpi wmi i2c_hid_acpi i2c_hid evdev CR2: 000000000000004f ---[ end trace 0000000000000000 ]--- Check the debugfs_dir pointer for an error before using it. [change to make both conditional] |
| CVE-2022-48917 | In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min While the $val/$val2 values passed in from userspace are always >= 0 integers, the limits of the control can be signed integers and the $min can be non-zero and less than zero. To correctly validate $val/$val2 against platform_max, add the $min offset to val first. |
| CVE-2022-48916 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix double list_add when enabling VMD in scalable mode When enabling VMD and IOMMU scalable mode, the following kernel panic call trace/kernel log is shown in Eagle Stream platform (Sapphire Rapids CPU) during booting: pci 0000:59:00.5: Adding to iommu group 42 ... vmd 0000:59:00.5: PCI host bridge to bus 10000:80 pci 10000:80:01.0: [8086:352a] type 01 class 0x060400 pci 10000:80:01.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:01.0: enabling Extended Tags pci 10000:80:01.0: PME# supported from D0 D3hot D3cold pci 10000:80:01.0: DMAR: Setup RID2PASID failed pci 10000:80:01.0: Failed to add to iommu group 42: -16 pci 10000:80:03.0: [8086:352b] type 01 class 0x060400 pci 10000:80:03.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:03.0: enabling Extended Tags pci 10000:80:03.0: PME# supported from D0 D3hot D3cold ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:29! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.17.0-rc3+ #7 Hardware name: Lenovo ThinkSystem SR650V3/SB27A86647, BIOS ESE101Y-1.00 01/13/2022 Workqueue: events work_for_cpu_fn RIP: 0010:__list_add_valid.cold+0x26/0x3f Code: 9a 4a ab ff 4c 89 c1 48 c7 c7 40 0c d9 9e e8 b9 b1 fe ff 0f 0b 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 f0 0c d9 9e e8 a2 b1 fe ff <0f> 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 98 0c d9 9e e8 8b b1 fe RSP: 0000:ff5ad434865b3a40 EFLAGS: 00010246 RAX: 0000000000000058 RBX: ff4d61160b74b880 RCX: ff4d61255e1fffa8 RDX: 0000000000000000 RSI: 00000000fffeffff RDI: ffffffff9fd34f20 RBP: ff4d611d8e245c00 R08: 0000000000000000 R09: ff5ad434865b3888 R10: ff5ad434865b3880 R11: ff4d61257fdc6fe8 R12: ff4d61160b74b8a0 R13: ff4d61160b74b8a0 R14: ff4d611d8e245c10 R15: ff4d611d8001ba70 FS: 0000000000000000(0000) GS:ff4d611d5ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ff4d611fa1401000 CR3: 0000000aa0210001 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> intel_pasid_alloc_table+0x9c/0x1d0 dmar_insert_one_dev_info+0x423/0x540 ? device_to_iommu+0x12d/0x2f0 intel_iommu_attach_device+0x116/0x290 __iommu_attach_device+0x1a/0x90 iommu_group_add_device+0x190/0x2c0 __iommu_probe_device+0x13e/0x250 iommu_probe_device+0x24/0x150 iommu_bus_notifier+0x69/0x90 blocking_notifier_call_chain+0x5a/0x80 device_add+0x3db/0x7b0 ? arch_memremap_can_ram_remap+0x19/0x50 ? memremap+0x75/0x140 pci_device_add+0x193/0x1d0 pci_scan_single_device+0xb9/0xf0 pci_scan_slot+0x4c/0x110 pci_scan_child_bus_extend+0x3a/0x290 vmd_enable_domain.constprop.0+0x63e/0x820 vmd_probe+0x163/0x190 local_pci_probe+0x42/0x80 work_for_cpu_fn+0x13/0x20 process_one_work+0x1e2/0x3b0 worker_thread+0x1c4/0x3a0 ? rescuer_thread+0x370/0x370 kthread+0xc7/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- ... Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The following 'lspci' output shows devices '10000:80:*' are subdevices of the VMD device 0000:59:00.5: $ lspci ... 0000:59:00.5 RAID bus controller: Intel Corporation Volume Management Device NVMe RAID Controller (rev 20) ... 10000:80:01.0 PCI bridge: Intel Corporation Device 352a (rev 03) 10000:80:03.0 PCI bridge: Intel Corporation Device 352b (rev 03) 10000:80:05.0 PCI bridge: Intel Corporation Device 352c (rev 03) 10000:80:07.0 PCI bridge: Intel Corporation Device 352d (rev 03) 10000:81:00.0 Non-Volatile memory controller: Intel Corporation NVMe Datacenter SSD [3DNAND, Beta Rock Controller] 10000:82:00 ---truncated--- |
| CVE-2022-48915 | In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix TZ_GET_TRIP NULL pointer dereference Do not call get_trip_hyst() from thermal_genl_cmd_tz_get_trip() if the thermal zone does not define one. |
| CVE-2022-48914 | In the Linux kernel, the following vulnerability has been resolved: xen/netfront: destroy queues before real_num_tx_queues is zeroed xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to delete queues. Since d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ("net-sysfs: update the queue counts in the unregistration path"), unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two facts together means, that xennet_destroy_queues() called from xennet_remove() cannot do its job, because it's called after unregister_netdev(). This results in kfree-ing queues that are still linked in napi, which ultimately crashes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Tainted: G W 5.16.10-1.32.fc32.qubes.x86_64+ #226 RIP: 0010:free_netdev+0xa3/0x1a0 Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00 RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050 R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0 Call Trace: <TASK> xennet_remove+0x13d/0x300 [xen_netfront] xenbus_dev_remove+0x6d/0xf0 __device_release_driver+0x17a/0x240 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18b/0x410 ? _raw_spin_unlock+0x16/0x30 ? klist_iter_exit+0x14/0x20 ? xenbus_dev_request_and_reply+0x80/0x80 device_unregister+0x13/0x60 xenbus_dev_changed+0x18e/0x1f0 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Fix this by calling xennet_destroy_queues() from xennet_uninit(), when real_num_tx_queues is still available. This ensures that queues are destroyed when real_num_tx_queues is set to 0, regardless of how unregister_netdev() was called. Originally reported at https://github.com/QubesOS/qubes-issues/issues/7257 |
| CVE-2022-48913 | In the Linux kernel, the following vulnerability has been resolved: blktrace: fix use after free for struct blk_trace When tracing the whole disk, 'dropped' and 'msg' will be created under 'q->debugfs_dir' and 'bt->dir' is NULL, thus blk_trace_free() won't remove those files. What's worse, the following UAF can be triggered because of accessing stale 'dropped' and 'msg': ================================================================== BUG: KASAN: use-after-free in blk_dropped_read+0x89/0x100 Read of size 4 at addr ffff88816912f3d8 by task blktrace/1188 CPU: 27 PID: 1188 Comm: blktrace Not tainted 5.17.0-rc4-next-20220217+ #469 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-4 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_address_description.constprop.0.cold+0xab/0x381 ? blk_dropped_read+0x89/0x100 ? blk_dropped_read+0x89/0x100 kasan_report.cold+0x83/0xdf ? blk_dropped_read+0x89/0x100 kasan_check_range+0x140/0x1b0 blk_dropped_read+0x89/0x100 ? blk_create_buf_file_callback+0x20/0x20 ? kmem_cache_free+0xa1/0x500 ? do_sys_openat2+0x258/0x460 full_proxy_read+0x8f/0xc0 vfs_read+0xc6/0x260 ksys_read+0xb9/0x150 ? vfs_write+0x3d0/0x3d0 ? fpregs_assert_state_consistent+0x55/0x60 ? exit_to_user_mode_prepare+0x39/0x1e0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fbc080d92fd Code: ce 20 00 00 75 10 b8 00 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 1 RSP: 002b:00007fbb95ff9cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007fbb95ff9dc0 RCX: 00007fbc080d92fd RDX: 0000000000000100 RSI: 00007fbb95ff9cc0 RDI: 0000000000000045 RBP: 0000000000000045 R08: 0000000000406299 R09: 00000000fffffffd R10: 000000000153afa0 R11: 0000000000000293 R12: 00007fbb780008c0 R13: 00007fbb78000938 R14: 0000000000608b30 R15: 00007fbb780029c8 </TASK> Allocated by task 1050: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 do_blk_trace_setup+0xcb/0x410 __blk_trace_setup+0xac/0x130 blk_trace_ioctl+0xe9/0x1c0 blkdev_ioctl+0xf1/0x390 __x64_sys_ioctl+0xa5/0xe0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 1050: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x103/0x180 kfree+0x9a/0x4c0 __blk_trace_remove+0x53/0x70 blk_trace_ioctl+0x199/0x1c0 blkdev_common_ioctl+0x5e9/0xb30 blkdev_ioctl+0x1a5/0x390 __x64_sys_ioctl+0xa5/0xe0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88816912f380 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 88 bytes inside of 96-byte region [ffff88816912f380, ffff88816912f3e0) The buggy address belongs to the page: page:000000009a1b4e7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0f flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0000200 ffffea00044f1100 dead000000000002 ffff88810004c780 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88816912f280: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff88816912f300: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc >ffff88816912f380: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff88816912f400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff88816912f480: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ================================================================== |
| CVE-2022-48912 | In the Linux kernel, the following vulnerability has been resolved: netfilter: fix use-after-free in __nf_register_net_hook() We must not dereference @new_hooks after nf_hook_mutex has been released, because other threads might have freed our allocated hooks already. BUG: KASAN: use-after-free in nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline] BUG: KASAN: use-after-free in hooks_validate net/netfilter/core.c:171 [inline] BUG: KASAN: use-after-free in __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438 Read of size 2 at addr ffff88801c1a8000 by task syz-executor237/4430 CPU: 1 PID: 4430 Comm: syz-executor237 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline] hooks_validate net/netfilter/core.c:171 [inline] __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438 nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571 nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587 nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218 synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81 xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038 check_target net/ipv6/netfilter/ip6_tables.c:530 [inline] find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573 translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735 do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline] do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101 ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1024 rawv6_setsockopt+0xd3/0x6a0 net/ipv6/raw.c:1084 __sys_setsockopt+0x2db/0x610 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f65a1ace7d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 71 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f65a1a7f308 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f65a1ace7d9 RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 RBP: 00007f65a1b574c8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000020000000 R11: 0000000000000246 R12: 00007f65a1b55130 R13: 00007f65a1b574c0 R14: 00007f65a1b24090 R15: 0000000000022000 </TASK> The buggy address belongs to the page: page:ffffea0000706a00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c1a8 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000000 ffffea0001c1b108 ffffea000046dd08 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 2, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 4430, ts 1061781545818, free_ts 1061791488993 prep_new_page mm/page_alloc.c:2434 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389 __alloc_pages_node include/linux/gfp.h:572 [inline] alloc_pages_node include/linux/gfp.h:595 [inline] kmalloc_large_node+0x62/0x130 mm/slub.c:4438 __kmalloc_node+0x35a/0x4a0 mm/slub. ---truncated--- |
| CVE-2022-48911 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_queue: fix possible use-after-free Eric Dumazet says: The sock_hold() side seems suspect, because there is no guarantee that sk_refcnt is not already 0. On failure, we cannot queue the packet and need to indicate an error. The packet will be dropped by the caller. v2: split skb prefetch hunk into separate change |
| CVE-2022-48910 | In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ensure we call ipv6_mc_down() at most once There are two reasons for addrconf_notify() to be called with NETDEV_DOWN: either the network device is actually going down, or IPv6 was disabled on the interface. If either of them stays down while the other is toggled, we repeatedly call the code for NETDEV_DOWN, including ipv6_mc_down(), while never calling the corresponding ipv6_mc_up() in between. This will cause a new entry in idev->mc_tomb to be allocated for each multicast group the interface is subscribed to, which in turn leaks one struct ifmcaddr6 per nontrivial multicast group the interface is subscribed to. The following reproducer will leak at least $n objects: ip addr add ff2e::4242/32 dev eth0 autojoin sysctl -w net.ipv6.conf.eth0.disable_ipv6=1 for i in $(seq 1 $n); do ip link set up eth0; ip link set down eth0 done Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2) can also be used to create a nontrivial idev->mc_list, which will the leak objects with the right up-down-sequence. Based on both sources for NETDEV_DOWN events the interface IPv6 state should be considered: - not ready if the network interface is not ready OR IPv6 is disabled for it - ready if the network interface is ready AND IPv6 is enabled for it The functions ipv6_mc_up() and ipv6_down() should only be run when this state changes. Implement this by remembering when the IPv6 state is ready, and only run ipv6_mc_down() if it actually changed from ready to not ready. The other direction (not ready -> ready) already works correctly, as: - the interface notification triggered codepath for NETDEV_UP / NETDEV_CHANGE returns early if ipv6 is disabled, and - the disable_ipv6=0 triggered codepath skips fully initializing the interface as long as addrconf_link_ready(dev) returns false - calling ipv6_mc_up() repeatedly does not leak anything |
| CVE-2022-48909 | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix connection leak There's a potential leak issue under following execution sequence : smc_release smc_connect_work if (sk->sk_state == SMC_INIT) send_clc_confirim tcp_abort(); ... sk.sk_state = SMC_ACTIVE smc_close_active switch(sk->sk_state) { ... case SMC_ACTIVE: smc_close_final() // then wait peer closed Unfortunately, tcp_abort() may discard CLC CONFIRM messages that are still in the tcp send buffer, in which case our connection token cannot be delivered to the server side, which means that we cannot get a passive close message at all. Therefore, it is impossible for the to be disconnected at all. This patch tries a very simple way to avoid this issue, once the state has changed to SMC_ACTIVE after tcp_abort(), we can actively abort the smc connection, considering that the state is SMC_INIT before tcp_abort(), abandoning the complete disconnection process should not cause too much problem. In fact, this problem may exist as long as the CLC CONFIRM message is not received by the server. Whether a timer should be added after smc_close_final() needs to be discussed in the future. But even so, this patch provides a faster release for connection in above case, it should also be valuable. |
| CVE-2022-48908 | In the Linux kernel, the following vulnerability has been resolved: net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe() During driver initialization, the pointer of card info, i.e. the variable 'ci' is required. However, the definition of 'com20020pci_id_table' reveals that this field is empty for some devices, which will cause null pointer dereference when initializing these devices. The following log reveals it: [ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci] [ 3.975181] Call Trace: [ 3.976208] local_pci_probe+0x13f/0x210 [ 3.977248] pci_device_probe+0x34c/0x6d0 [ 3.977255] ? pci_uevent+0x470/0x470 [ 3.978265] really_probe+0x24c/0x8d0 [ 3.978273] __driver_probe_device+0x1b3/0x280 [ 3.979288] driver_probe_device+0x50/0x370 Fix this by checking whether the 'ci' is a null pointer first. |
| CVE-2022-48907 | In the Linux kernel, the following vulnerability has been resolved: auxdisplay: lcd2s: Fix memory leak in ->remove() Once allocated the struct lcd2s_data is never freed. Fix the memory leak by switching to devm_kzalloc(). |
| CVE-2022-48906 | In the Linux kernel, the following vulnerability has been resolved: mptcp: Correctly set DATA_FIN timeout when number of retransmits is large Syzkaller with UBSAN uncovered a scenario where a large number of DATA_FIN retransmits caused a shift-out-of-bounds in the DATA_FIN timeout calculation: ================================================================================ UBSAN: shift-out-of-bounds in net/mptcp/protocol.c:470:29 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 1 PID: 13059 Comm: kworker/1:0 Not tainted 5.17.0-rc2-00630-g5fbf21c90c60 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: events mptcp_worker Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e lib/ubsan.c:330 mptcp_set_datafin_timeout net/mptcp/protocol.c:470 [inline] __mptcp_retrans.cold+0x72/0x77 net/mptcp/protocol.c:2445 mptcp_worker+0x58a/0xa70 net/mptcp/protocol.c:2528 process_one_work+0x9df/0x16d0 kernel/workqueue.c:2307 worker_thread+0x95/0xe10 kernel/workqueue.c:2454 kthread+0x2f4/0x3b0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ================================================================================ This change limits the maximum timeout by limiting the size of the shift, which keeps all intermediate values in-bounds. |
| CVE-2022-48905 | In the Linux kernel, the following vulnerability has been resolved: ibmvnic: free reset-work-item when flushing Fix a tiny memory leak when flushing the reset work queue. |
| CVE-2022-48904 | In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix I/O page table memory leak The current logic updates the I/O page table mode for the domain before calling the logic to free memory used for the page table. This results in IOMMU page table memory leak, and can be observed when launching VM w/ pass-through devices. Fix by freeing the memory used for page table before updating the mode. |
| CVE-2022-48903 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix relocation crash due to premature return from btrfs_commit_transaction() We are seeing crashes similar to the following trace: [38.969182] WARNING: CPU: 20 PID: 2105 at fs/btrfs/relocation.c:4070 btrfs_relocate_block_group+0x2dc/0x340 [btrfs] [38.973556] CPU: 20 PID: 2105 Comm: btrfs Not tainted 5.17.0-rc4 #54 [38.974580] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [38.976539] RIP: 0010:btrfs_relocate_block_group+0x2dc/0x340 [btrfs] [38.980336] RSP: 0000:ffffb0dd42e03c20 EFLAGS: 00010206 [38.981218] RAX: ffff96cfc4ede800 RBX: ffff96cfc3ce0000 RCX: 000000000002ca14 [38.982560] RDX: 0000000000000000 RSI: 4cfd109a0bcb5d7f RDI: ffff96cfc3ce0360 [38.983619] RBP: ffff96cfc309c000 R08: 0000000000000000 R09: 0000000000000000 [38.984678] R10: ffff96cec0000001 R11: ffffe84c80000000 R12: ffff96cfc4ede800 [38.985735] R13: 0000000000000000 R14: 0000000000000000 R15: ffff96cfc3ce0360 [38.987146] FS: 00007f11c15218c0(0000) GS:ffff96d6dfb00000(0000) knlGS:0000000000000000 [38.988662] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [38.989398] CR2: 00007ffc922c8e60 CR3: 00000001147a6001 CR4: 0000000000370ee0 [38.990279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [38.991219] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [38.992528] Call Trace: [38.992854] <TASK> [38.993148] btrfs_relocate_chunk+0x27/0xe0 [btrfs] [38.993941] btrfs_balance+0x78e/0xea0 [btrfs] [38.994801] ? vsnprintf+0x33c/0x520 [38.995368] ? __kmalloc_track_caller+0x351/0x440 [38.996198] btrfs_ioctl_balance+0x2b9/0x3a0 [btrfs] [38.997084] btrfs_ioctl+0x11b0/0x2da0 [btrfs] [38.997867] ? mod_objcg_state+0xee/0x340 [38.998552] ? seq_release+0x24/0x30 [38.999184] ? proc_nr_files+0x30/0x30 [38.999654] ? call_rcu+0xc8/0x2f0 [39.000228] ? __x64_sys_ioctl+0x84/0xc0 [39.000872] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [39.001973] __x64_sys_ioctl+0x84/0xc0 [39.002566] do_syscall_64+0x3a/0x80 [39.003011] entry_SYSCALL_64_after_hwframe+0x44/0xae [39.003735] RIP: 0033:0x7f11c166959b [39.007324] RSP: 002b:00007fff2543e998 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [39.008521] RAX: ffffffffffffffda RBX: 00007f11c1521698 RCX: 00007f11c166959b [39.009833] RDX: 00007fff2543ea40 RSI: 00000000c4009420 RDI: 0000000000000003 [39.011270] RBP: 0000000000000003 R08: 0000000000000013 R09: 00007f11c16f94e0 [39.012581] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff25440df3 [39.014046] R13: 0000000000000000 R14: 00007fff2543ea40 R15: 0000000000000001 [39.015040] </TASK> [39.015418] ---[ end trace 0000000000000000 ]--- [43.131559] ------------[ cut here ]------------ [43.132234] kernel BUG at fs/btrfs/extent-tree.c:2717! [43.133031] invalid opcode: 0000 [#1] PREEMPT SMP PTI [43.133702] CPU: 1 PID: 1839 Comm: btrfs Tainted: G W 5.17.0-rc4 #54 [43.134863] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [43.136426] RIP: 0010:unpin_extent_range+0x37a/0x4f0 [btrfs] [43.139913] RSP: 0000:ffffb0dd4216bc70 EFLAGS: 00010246 [43.140629] RAX: 0000000000000000 RBX: ffff96cfc34490f8 RCX: 0000000000000001 [43.141604] RDX: 0000000080000001 RSI: 0000000051d00000 RDI: 00000000ffffffff [43.142645] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff96cfd07dca50 [43.143669] R10: ffff96cfc46e8a00 R11: fffffffffffec000 R12: 0000000041d00000 [43.144657] R13: ffff96cfc3ce0000 R14: ffffb0dd4216bd08 R15: 0000000000000000 [43.145686] FS: 00007f7657dd68c0(0000) GS:ffff96d6df640000(0000) knlGS:0000000000000000 [43.146808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [43.147584] CR2: 00007f7fe81bf5b0 CR3: 00000001093ee004 CR4: 0000000000370ee0 [43.148589] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [43.149581] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 00000000000 ---truncated--- |
| CVE-2022-48902 | In the Linux kernel, the following vulnerability has been resolved: btrfs: do not WARN_ON() if we have PageError set Whenever we do any extent buffer operations we call assert_eb_page_uptodate() to complain loudly if we're operating on an non-uptodate page. Our overnight tests caught this warning earlier this week WARNING: CPU: 1 PID: 553508 at fs/btrfs/extent_io.c:6849 assert_eb_page_uptodate+0x3f/0x50 CPU: 1 PID: 553508 Comm: kworker/u4:13 Tainted: G W 5.17.0-rc3+ #564 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: btrfs-cache btrfs_work_helper RIP: 0010:assert_eb_page_uptodate+0x3f/0x50 RSP: 0018:ffffa961440a7c68 EFLAGS: 00010246 RAX: 0017ffffc0002112 RBX: ffffe6e74453f9c0 RCX: 0000000000001000 RDX: ffffe6e74467c887 RSI: ffffe6e74453f9c0 RDI: ffff8d4c5efc2fc0 RBP: 0000000000000d56 R08: ffff8d4d4a224000 R09: 0000000000000000 R10: 00015817fa9d1ef0 R11: 000000000000000c R12: 00000000000007b1 R13: ffff8d4c5efc2fc0 R14: 0000000001500000 R15: 0000000001cb1000 FS: 0000000000000000(0000) GS:ffff8d4dbbd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff31d3448d8 CR3: 0000000118be8004 CR4: 0000000000370ee0 Call Trace: extent_buffer_test_bit+0x3f/0x70 free_space_test_bit+0xa6/0xc0 load_free_space_tree+0x1f6/0x470 caching_thread+0x454/0x630 ? rcu_read_lock_sched_held+0x12/0x60 ? rcu_read_lock_sched_held+0x12/0x60 ? rcu_read_lock_sched_held+0x12/0x60 ? lock_release+0x1f0/0x2d0 btrfs_work_helper+0xf2/0x3e0 ? lock_release+0x1f0/0x2d0 ? finish_task_switch.isra.0+0xf9/0x3a0 process_one_work+0x26d/0x580 ? process_one_work+0x580/0x580 worker_thread+0x55/0x3b0 ? process_one_work+0x580/0x580 kthread+0xf0/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 This was partially fixed by c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it"), however all that fix did was keep us from finding extent buffers after a failed writeout. It didn't keep us from continuing to use a buffer that we already had found. In this case we're searching the commit root to cache the block group, so we can start committing the transaction and switch the commit root and then start writing. After the switch we can look up an extent buffer that hasn't been written yet and start processing that block group. Then we fail to write that block out and clear Uptodate on the page, and then we start spewing these errors. Normally we're protected by the tree lock to a certain degree here. If we read a block we have that block read locked, and we block the writer from locking the block before we submit it for the write. However this isn't necessarily fool proof because the read could happen before we do the submit_bio and after we locked and unlocked the extent buffer. Also in this particular case we have path->skip_locking set, so that won't save us here. We'll simply get a block that was valid when we read it, but became invalid while we were using it. What we really want is to catch the case where we've "read" a block but it's not marked Uptodate. On read we ClearPageError(), so if we're !Uptodate and !Error we know we didn't do the right thing for reading the page. Fix this by checking !Uptodate && !Error, this way we will not complain if our buffer gets invalidated while we're using it, and we'll maintain the spirit of the check which is to make sure we have a fully in-cache block while we're messing with it. |
| CVE-2022-48901 | In the Linux kernel, the following vulnerability has been resolved: btrfs: do not start relocation until in progress drops are done We hit a bug with a recovering relocation on mount for one of our file systems in production. I reproduced this locally by injecting errors into snapshot delete with balance running at the same time. This presented as an error while looking up an extent item WARNING: CPU: 5 PID: 1501 at fs/btrfs/extent-tree.c:866 lookup_inline_extent_backref+0x647/0x680 CPU: 5 PID: 1501 Comm: btrfs-balance Not tainted 5.16.0-rc8+ #8 RIP: 0010:lookup_inline_extent_backref+0x647/0x680 RSP: 0018:ffffae0a023ab960 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000000000 RBP: ffff943fd2a39b60 R08: 0000000000000000 R09: 0000000000000001 R10: 0001434088152de0 R11: 0000000000000000 R12: 0000000001d05000 R13: ffff943fd2a39b60 R14: ffff943fdb96f2a0 R15: ffff9442fc923000 FS: 0000000000000000(0000) GS:ffff944e9eb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1157b1fca8 CR3: 000000010f092000 CR4: 0000000000350ee0 Call Trace: <TASK> insert_inline_extent_backref+0x46/0xd0 __btrfs_inc_extent_ref.isra.0+0x5f/0x200 ? btrfs_merge_delayed_refs+0x164/0x190 __btrfs_run_delayed_refs+0x561/0xfa0 ? btrfs_search_slot+0x7b4/0xb30 ? btrfs_update_root+0x1a9/0x2c0 btrfs_run_delayed_refs+0x73/0x1f0 ? btrfs_update_root+0x1a9/0x2c0 btrfs_commit_transaction+0x50/0xa50 ? btrfs_update_reloc_root+0x122/0x220 prepare_to_merge+0x29f/0x320 relocate_block_group+0x2b8/0x550 btrfs_relocate_block_group+0x1a6/0x350 btrfs_relocate_chunk+0x27/0xe0 btrfs_balance+0x777/0xe60 balance_kthread+0x35/0x50 ? btrfs_balance+0xe60/0xe60 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Normally snapshot deletion and relocation are excluded from running at the same time by the fs_info->cleaner_mutex. However if we had a pending balance waiting to get the ->cleaner_mutex, and a snapshot deletion was running, and then the box crashed, we would come up in a state where we have a half deleted snapshot. Again, in the normal case the snapshot deletion needs to complete before relocation can start, but in this case relocation could very well start before the snapshot deletion completes, as we simply add the root to the dead roots list and wait for the next time the cleaner runs to clean up the snapshot. Fix this by setting a bit on the fs_info if we have any DEAD_ROOT's that had a pending drop_progress key. If they do then we know we were in the middle of the drop operation and set a flag on the fs_info. Then balance can wait until this flag is cleared to start up again. If there are DEAD_ROOT's that don't have a drop_progress set then we're safe to start balance right away as we'll be properly protected by the cleaner_mutex. |
| CVE-2022-48899 | In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix GEM handle creation UAF Userspace can guess the handle value and try to race GEM object creation with handle close, resulting in a use-after-free if we dereference the object after dropping the handle's reference. For that reason, dropping the handle's reference must be done *after* we are done dereferencing the object. |
| CVE-2022-48898 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer There are 3 possible interrupt sources are handled by DP controller, HPDstatus, Controller state changes and Aux read/write transaction. At every irq, DP controller have to check isr status of every interrupt sources and service the interrupt if its isr status bits shows interrupts are pending. There is potential race condition may happen at current aux isr handler implementation since it is always complete dp_aux_cmd_fifo_tx() even irq is not for aux read or write transaction. This may cause aux read transaction return premature if host aux data read is in the middle of waiting for sink to complete transferring data to host while irq happen. This will cause host's receiving buffer contains unexpected data. This patch fixes this problem by checking aux isr and return immediately at aux isr handler if there are no any isr status bits set. Current there is a bug report regrading eDP edid corruption happen during system booting up. After lengthy debugging to found that VIDEO_READY interrupt was continuously firing during system booting up which cause dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data from aux hardware buffer which is not yet contains complete data transfer from sink. This cause edid corruption. Follows are the signature at kernel logs when problem happen, EDID has corrupt header panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID Changes in v2: -- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr() -- add more commit text Changes in v3: -- add Stephen suggested -- dp_aux_isr() return IRQ_XXX back to caller -- dp_ctrl_isr() return IRQ_XXX back to caller Changes in v4: -- split into two patches Changes in v5: -- delete empty line between tags Changes in v6: -- remove extra "that" and fixed line more than 75 char at commit text Patchwork: https://patchwork.freedesktop.org/patch/516121/ |
| CVE-2022-48897 | In the Linux kernel, the following vulnerability has been resolved: arm64/mm: fix incorrect file_map_count for invalid pmd The page table check trigger BUG_ON() unexpectedly when split hugepage: ------------[ cut here ]------------ kernel BUG at mm/page_table_check.c:119! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 7 PID: 210 Comm: transhuge-stres Not tainted 6.1.0-rc3+ #748 Hardware name: linux,dummy-virt (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : page_table_check_set.isra.0+0x398/0x468 lr : page_table_check_set.isra.0+0x1c0/0x468 [...] Call trace: page_table_check_set.isra.0+0x398/0x468 __page_table_check_pte_set+0x160/0x1c0 __split_huge_pmd_locked+0x900/0x1648 __split_huge_pmd+0x28c/0x3b8 unmap_page_range+0x428/0x858 unmap_single_vma+0xf4/0x1c8 zap_page_range+0x2b0/0x410 madvise_vma_behavior+0xc44/0xe78 do_madvise+0x280/0x698 __arm64_sys_madvise+0x90/0xe8 invoke_syscall.constprop.0+0xdc/0x1d8 do_el0_svc+0xf4/0x3f8 el0_svc+0x58/0x120 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x19c/0x1a0 [...] On arm64, pmd_leaf() will return true even if the pmd is invalid due to pmd_present_invalid() check. So in pmdp_invalidate() the file_map_count will not only decrease once but also increase once. Then in set_pte_at(), the file_map_count increase again, and so trigger BUG_ON() unexpectedly. Add !pmd_present_invalid() check in pmd_user_accessible_page() to fix the problem. |
| CVE-2022-48896 | In the Linux kernel, the following vulnerability has been resolved: ixgbe: fix pci device refcount leak As the comment of pci_get_domain_bus_and_slot() says, it returns a PCI device with refcount incremented, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). In ixgbe_get_first_secondary_devfn() and ixgbe_x550em_a_has_mii(), pci_dev_put() is called to avoid leak. |
| CVE-2022-48895 | In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Don't unregister on shutdown Michael Walle says he noticed the following stack trace while performing a shutdown with "reboot -f". He suggests he got "lucky" and just hit the correct spot for the reboot while there was a packet transmission in flight. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 6.1.0-rc5-00088-gf3600ff8e322 #1930 Hardware name: Kontron KBox A-230-LS (DT) pc : iommu_get_dma_domain+0x14/0x20 lr : iommu_dma_map_page+0x9c/0x254 Call trace: iommu_get_dma_domain+0x14/0x20 dma_map_page_attrs+0x1ec/0x250 enetc_start_xmit+0x14c/0x10b0 enetc_xmit+0x60/0xdc dev_hard_start_xmit+0xb8/0x210 sch_direct_xmit+0x11c/0x420 __dev_queue_xmit+0x354/0xb20 ip6_finish_output2+0x280/0x5b0 __ip6_finish_output+0x15c/0x270 ip6_output+0x78/0x15c NF_HOOK.constprop.0+0x50/0xd0 mld_sendpack+0x1bc/0x320 mld_ifc_work+0x1d8/0x4dc process_one_work+0x1e8/0x460 worker_thread+0x178/0x534 kthread+0xe0/0xe4 ret_from_fork+0x10/0x20 Code: d503201f f9416800 d503233f d50323bf (f9404c00) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt This appears to be reproducible when the board has a fixed IP address, is ping flooded from another host, and "reboot -f" is used. The following is one more manifestation of the issue: $ reboot -f kvm: exiting hardware virtualization cfg80211: failed to load regulatory.db arm-smmu 5000000.iommu: disabling translation sdhci-esdhc 2140000.mmc: Removing from iommu group 11 sdhci-esdhc 2150000.mmc: Removing from iommu group 12 fsl-edma 22c0000.dma-controller: Removing from iommu group 17 dwc3 3100000.usb: Removing from iommu group 9 dwc3 3110000.usb: Removing from iommu group 10 ahci-qoriq 3200000.sata: Removing from iommu group 2 fsl-qdma 8380000.dma-controller: Removing from iommu group 20 platform f080000.display: Removing from iommu group 0 etnaviv-gpu f0c0000.gpu: Removing from iommu group 1 etnaviv etnaviv: Removing from iommu group 1 caam_jr 8010000.jr: Removing from iommu group 13 caam_jr 8020000.jr: Removing from iommu group 14 caam_jr 8030000.jr: Removing from iommu group 15 caam_jr 8040000.jr: Removing from iommu group 16 fsl_enetc 0000:00:00.0: Removing from iommu group 4 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000 fsl_enetc 0000:00:00.1: Removing from iommu group 5 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000 fsl_enetc 0000:00:00.2: Removing from iommu group 6 fsl_enetc_mdio 0000:00:00.3: Removing from iommu group 8 mscc_felix 0000:00:00.5: Removing from iommu group 3 fsl_enetc 0000:00:00.6: Removing from iommu group 7 pcieport 0001:00:00.0: Removing from iommu group 18 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000 pcieport 0002:00:00.0: Removing from iommu group 19 Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8 pc : iommu_get_dma_domain+0x14/0x20 lr : iommu_dma_unmap_page+0x38/0xe0 Call trace: iommu_get_dma_domain+0x14/0x20 dma_unmap_page_attrs+0x38/0x1d0 en ---truncated--- |
| CVE-2022-48894 | In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Don't unregister on shutdown Similar to SMMUv2, this driver calls iommu_device_unregister() from the shutdown path, which removes the IOMMU groups with no coordination whatsoever with their users - shutdown methods are optional in device drivers. This can lead to NULL pointer dereferences in those drivers' DMA API calls, or worse. Instead of calling the full arm_smmu_device_remove() from arm_smmu_device_shutdown(), let's pick only the relevant function call - arm_smmu_device_disable() - more or less the reverse of arm_smmu_device_reset() - and call just that from the shutdown path. |
| CVE-2022-48893 | In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Cleanup partial engine discovery failures If we abort driver initialisation in the middle of gt/engine discovery, some engines will be fully setup and some not. Those incompletely setup engines only have 'engine->release == NULL' and so will leak any of the common objects allocated. v2: - Drop the destroy_pinned_context() helper for now. It's not really worth it with just a single callsite at the moment. (Janusz) |
| CVE-2022-48892 | In the Linux kernel, the following vulnerability has been resolved: sched/core: Fix use-after-free bug in dup_user_cpus_ptr() Since commit 07ec77a1d4e8 ("sched: Allow task CPU affinity to be restricted on asymmetric systems"), the setting and clearing of user_cpus_ptr are done under pi_lock for arm64 architecture. However, dup_user_cpus_ptr() accesses user_cpus_ptr without any lock protection. Since sched_setaffinity() can be invoked from another process, the process being modified may be undergoing fork() at the same time. When racing with the clearing of user_cpus_ptr in __set_cpus_allowed_ptr_locked(), it can lead to user-after-free and possibly double-free in arm64 kernel. Commit 8f9ea86fdf99 ("sched: Always preserve the user requested cpumask") fixes this problem as user_cpus_ptr, once set, will never be cleared in a task's lifetime. However, this bug was re-introduced in commit 851a723e45d1 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()") which allows the clearing of user_cpus_ptr in do_set_cpus_allowed(). This time, it will affect all arches. Fix this bug by always clearing the user_cpus_ptr of the newly cloned/forked task before the copying process starts and check the user_cpus_ptr state of the source task under pi_lock. Note to stable, this patch won't be applicable to stable releases. Just copy the new dup_user_cpus_ptr() function over. |
| CVE-2022-48891 | In the Linux kernel, the following vulnerability has been resolved: regulator: da9211: Use irq handler when ready If the system does not come from reset (like when it is kexec()), the regulator might have an IRQ waiting for us. If we enable the IRQ handler before its structures are ready, we crash. This patch fixes: [ 1.141839] Unable to handle kernel read from unreadable memory at virtual address 0000000000000078 [ 1.316096] Call trace: [ 1.316101] blocking_notifier_call_chain+0x20/0xa8 [ 1.322757] cpu cpu0: dummy supplies not allowed for exclusive requests [ 1.327823] regulator_notifier_call_chain+0x1c/0x2c [ 1.327825] da9211_irq_handler+0x68/0xf8 [ 1.327829] irq_thread+0x11c/0x234 [ 1.327833] kthread+0x13c/0x154 |
| CVE-2022-48890 | In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM storvsc_queuecommand() maps the scatter/gather list using scsi_dma_map(), which in a confidential VM allocates swiotlb bounce buffers. If the I/O submission fails in storvsc_do_io(), the I/O is typically retried by higher level code, but the bounce buffer memory is never freed. The mostly like cause of I/O submission failure is a full VMBus channel ring buffer, which is not uncommon under high I/O loads. Eventually enough bounce buffer memory leaks that the confidential VM can't do any I/O. The same problem can arise in a non-confidential VM with kernel boot parameter swiotlb=force. Fix this by doing scsi_dma_unmap() in the case of an I/O submission error, which frees the bounce buffer memory. |
| CVE-2022-48889 | In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof-nau8825: fix module alias overflow The maximum name length for a platform_device_id entry is 20 characters including the trailing NUL byte. The sof_nau8825.c file exceeds that, which causes an obscure error message: sound/soc/intel/boards/snd-soc-sof_nau8825.mod.c:35:45: error: illegal character encoding in string literal [-Werror,-Winvalid-source-encoding] MODULE_ALIAS("platform:adl_max98373_nau8825<U+0018><AA>"); ^~~~ include/linux/module.h:168:49: note: expanded from macro 'MODULE_ALIAS' ^~~~~~ include/linux/module.h:165:56: note: expanded from macro 'MODULE_INFO' ^~~~ include/linux/moduleparam.h:26:47: note: expanded from macro '__MODULE_INFO' = __MODULE_INFO_PREFIX __stringify(tag) "=" info I could not figure out how to make the module handling robust enough to handle this better, but as a quick fix, using slightly shorter names that are still unique avoids the build issue. |
| CVE-2022-48888 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Fix memory leak in msm_mdss_parse_data_bus_icc_path of_icc_get() alloc resources for path1, we should release it when not need anymore. Early return when IS_ERR_OR_NULL(path0) may leak path1. Defer getting path1 to fix this. Patchwork: https://patchwork.freedesktop.org/patch/514264/ |
| CVE-2022-48887 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Remove rcu locks from user resources User resource lookups used rcu to avoid two extra atomics. Unfortunately the rcu paths were buggy and it was easy to make the driver crash by submitting command buffers from two different threads. Because the lookups never show up in performance profiles replace them with a regular spin lock which fixes the races in accesses to those shared resources. Fixes kernel oops'es in IGT's vmwgfx execution_buffer stress test and seen crashes with apps using shared resources. |
| CVE-2022-48886 | In the Linux kernel, the following vulnerability has been resolved: ice: Add check for kzalloc Add the check for the return value of kzalloc in order to avoid NULL pointer dereference. Moreover, use the goto-label to share the clean code. |
| CVE-2022-48885 | In the Linux kernel, the following vulnerability has been resolved: ice: Fix potential memory leak in ice_gnss_tty_write() The ice_gnss_tty_write() return directly if the write_buf alloc failed, leaking the cmd_buf. Fix by free cmd_buf if write_buf alloc failed. |
| CVE-2022-48884 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix command stats access after free Command may fail while driver is reloading and can't accept FW commands till command interface is reinitialized. Such command failure is being logged to command stats. This results in NULL pointer access as command stats structure is being freed and reallocated during mlx5 devlink reload (see kernel log below). Fix it by making command stats statically allocated on driver probe. Kernel log: [ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0 [ 2394.810610] PGD 0 P4D 0 [ 2394.811811] Oops: 0002 [#1] SMP NOPTI ... [ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0 ... [ 2394.829505] Call Trace: [ 2394.830667] _raw_spin_lock_irq+0x23/0x26 [ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core] [ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core] [ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core] [ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core] [ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0 [ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100 [ 2394.838663] ? __rtnl_unlock+0x25/0x50 [ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150 [ 2394.840862] duplex_show+0x6e/0xc0 [ 2394.841963] dev_attr_show+0x1c/0x40 [ 2394.843048] sysfs_kf_seq_show+0x9b/0x100 [ 2394.844123] seq_read+0x153/0x410 [ 2394.845187] vfs_read+0x91/0x140 [ 2394.846226] ksys_read+0x4f/0xb0 [ 2394.847234] do_syscall_64+0x5b/0x1a0 [ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca |
| CVE-2022-48883 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: IPoIB, Block PKEY interfaces with less rx queues than parent A user is able to configure an arbitrary number of rx queues when creating an interface via netlink. This doesn't work for child PKEY interfaces because the child interface uses the parent receive channels. Although the child shares the parent's receive channels, the number of rx queues is important for the channel_stats array: the parent's rx channel index is used to access the child's channel_stats. So the array has to be at least as large as the parent's rx queue size for the counting to work correctly and to prevent out of bound accesses. This patch checks for the mentioned scenario and returns an error when trying to create the interface. The error is propagated to the user. |
| CVE-2022-48882 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY) Upon updating MAC security entity (SecY) in hw offload path, the macsec security association (SA) initialization routine is called. In case of extended packet number (epn) is enabled the salt and ssci attributes are retrieved using the MACsec driver rx_sa context which is unavailable when updating a SecY property such as encoding-sa hence the null dereference. Fix by using the provided SA to set those attributes. |
| CVE-2022-48881 | In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: Fix refcount leak in amd_pmc_probe pci_get_domain_bus_and_slot() takes reference, the caller should release the reference by calling pci_dev_put() after use. Call pci_dev_put() in the error path to fix this. |
| CVE-2022-48880 | In the Linux kernel, the following vulnerability has been resolved: platform/surface: aggregator: Add missing call to ssam_request_sync_free() Although rare, ssam_request_sync_init() can fail. In that case, the request should be freed via ssam_request_sync_free(). Currently it is leaked instead. Fix this. |
| CVE-2022-48879 | In the Linux kernel, the following vulnerability has been resolved: efi: fix NULL-deref in init error path In cases where runtime services are not supported or have been disabled, the runtime services workqueue will never have been allocated. Do not try to destroy the workqueue unconditionally in the unlikely event that EFI initialisation fails to avoid dereferencing a NULL pointer. |
| CVE-2022-48878 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Fix driver shutdown on closed serdev The driver shutdown callback (which sends EDL_SOC_RESET to the device over serdev) should not be invoked when HCI device is not open (e.g. if hci_dev_open_sync() failed), because the serdev and its TTY are not open either. Also skip this step if device is powered off (qca_power_shutdown()). The shutdown callback causes use-after-free during system reboot with Qualcomm Atheros Bluetooth: Unable to handle kernel paging request at virtual address 0072662f67726fd7 ... CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W 6.1.0-rt5-00325-g8a5f56bcfcca #8 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: tty_driver_flush_buffer+0x4/0x30 serdev_device_write_flush+0x24/0x34 qca_serdev_shutdown+0x80/0x130 [hci_uart] device_shutdown+0x15c/0x260 kernel_restart+0x48/0xac KASAN report: BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50 Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1 CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xdc/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x68/0x84 print_report+0x188/0x488 kasan_report+0xa4/0xf0 __asan_load8+0x80/0xac tty_driver_flush_buffer+0x1c/0x50 ttyport_write_flush+0x34/0x44 serdev_device_write_flush+0x48/0x60 qca_serdev_shutdown+0x124/0x274 device_shutdown+0x1e8/0x350 kernel_restart+0x48/0xb0 __do_sys_reboot+0x244/0x2d0 __arm64_sys_reboot+0x54/0x70 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x44/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xbc/0x140 el0t_64_sync+0x190/0x194 |
| CVE-2022-48877 | In the Linux kernel, the following vulnerability has been resolved: f2fs: let's avoid panic if extent_tree is not created This patch avoids the below panic. pc : __lookup_extent_tree+0xd8/0x760 lr : f2fs_do_write_data_page+0x104/0x87c sp : ffffffc010cbb3c0 x29: ffffffc010cbb3e0 x28: 0000000000000000 x27: ffffff8803e7f020 x26: ffffff8803e7ed40 x25: ffffff8803e7f020 x24: ffffffc010cbb460 x23: ffffffc010cbb480 x22: 0000000000000000 x21: 0000000000000000 x20: ffffffff22e90900 x19: 0000000000000000 x18: ffffffc010c5d080 x17: 0000000000000000 x16: 0000000000000020 x15: ffffffdb1acdbb88 x14: ffffff888759e2b0 x13: 0000000000000000 x12: ffffff802da49000 x11: 000000000a001200 x10: ffffff8803e7ed40 x9 : ffffff8023195800 x8 : ffffff802da49078 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0000000000000006 x4 : ffffffc010cbba28 x3 : 0000000000000000 x2 : ffffffc010cbb480 x1 : 0000000000000000 x0 : ffffff8803e7ed40 Call trace: __lookup_extent_tree+0xd8/0x760 f2fs_do_write_data_page+0x104/0x87c f2fs_write_single_data_page+0x420/0xb60 f2fs_write_cache_pages+0x418/0xb1c __f2fs_write_data_pages+0x428/0x58c f2fs_write_data_pages+0x30/0x40 do_writepages+0x88/0x190 __writeback_single_inode+0x48/0x448 writeback_sb_inodes+0x468/0x9e8 __writeback_inodes_wb+0xb8/0x2a4 wb_writeback+0x33c/0x740 wb_do_writeback+0x2b4/0x400 wb_workfn+0xe4/0x34c process_one_work+0x24c/0x5bc worker_thread+0x3e8/0xa50 kthread+0x150/0x1b4 |
| CVE-2022-48876 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix initialization of rx->link and rx->link_sta There are some codepaths that do not initialize rx->link_sta properly. This causes a crash in places which assume that rx->link_sta is valid if rx->sta is valid. One known instance is triggered by __ieee80211_rx_h_amsdu being called from fast-rx. It results in a crash like this one: BUG: kernel NULL pointer dereference, address: 00000000000000a8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 1 PID: 506 Comm: mt76-usb-rx phy Tainted: G E 6.1.0-debian64x+1.7 #3 Hardware name: ZOTAC ZBOX-ID92/ZBOX-IQ01/ZBOX-ID92/ZBOX-IQ01, BIOS B220P007 05/21/2014 RIP: 0010:ieee80211_deliver_skb+0x62/0x1f0 [mac80211] Code: 00 48 89 04 24 e8 9e a7 c3 df 89 c0 48 03 1c c5 a0 ea 39 a1 4c 01 6b 08 48 ff 03 48 83 7d 28 00 74 11 48 8b 45 30 48 63 55 44 <48> 83 84 d0 a8 00 00 00 01 41 8b 86 c0 11 00 00 8d 50 fd 83 fa 01 RSP: 0018:ffff999040803b10 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffffb9903f496480 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff999040803ce0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d21828ac900 R13: 000000000000004a R14: ffff8d2198ed89c0 R15: ffff8d2198ed8000 FS: 0000000000000000(0000) GS:ffff8d24afe80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a8 CR3: 0000000429810002 CR4: 00000000001706e0 Call Trace: <TASK> __ieee80211_rx_h_amsdu+0x1b5/0x240 [mac80211] ? ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211] ? __local_bh_enable_ip+0x3b/0xa0 ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211] ? prepare_transfer+0x109/0x1a0 [xhci_hcd] ieee80211_rx_list+0xa80/0xda0 [mac80211] mt76_rx_complete+0x207/0x2e0 [mt76] mt76_rx_poll_complete+0x357/0x5a0 [mt76] mt76u_rx_worker+0x4f5/0x600 [mt76_usb] ? mt76_get_min_avg_rssi+0x140/0x140 [mt76] __mt76_worker_fn+0x50/0x80 [mt76] kthread+0xed/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Since the initialization of rx->link and rx->link_sta is rather convoluted and duplicated in many places, clean it up by using a helper function to set it. [remove unnecessary rx->sta->sta.mlo check] |
| CVE-2022-48875 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: sdata can be NULL during AMPDU start ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a deauthentication is ongoing. Here a trace triggering the race with the hostapd test multi_ap_fronthaul_on_ap: (gdb) list *drv_ampdu_action+0x46 0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396). 391 int ret = -EOPNOTSUPP; 392 393 might_sleep(); 394 395 sdata = get_bss_sdata(sdata); 396 if (!check_sdata_in_driver(sdata)) 397 return -EIO; 398 399 trace_drv_ampdu_action(local, sdata, params); 400 wlan0: moving STA 02:00:00:00:03:00 to state 3 wlan0: associated wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING) wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0 wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port) wlan0: moving STA 02:00:00:00:03:00 to state 2 wlan0: moving STA 02:00:00:00:03:00 to state 1 wlan0: Removed STA 02:00:00:00:03:00 wlan0: Destroyed STA 02:00:00:00:03:00 BUG: unable to handle page fault for address: fffffffffffffb48 PGD 11814067 P4D 11814067 PUD 11816067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 133397 Comm: kworker/u16:1 Tainted: G W 6.1.0-rc8-wt+ #59 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Workqueue: phy3 ieee80211_ba_session_work [mac80211] RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211] Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85 RSP: 0018:ffffc900025ebd20 EFLAGS: 00010287 RAX: 0000000000000000 RBX: fffffffffffff1f0 RCX: ffff888102228240 RDX: 0000000080000000 RSI: ffffffff918c5de0 RDI: ffff888102228b40 RBP: ffffc900025ebd40 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888118c18ec0 R13: 0000000000000000 R14: ffffc900025ebd60 R15: ffff888018b7efb8 FS: 0000000000000000(0000) GS:ffff88817a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffb48 CR3: 0000000105228006 CR4: 0000000000170ee0 Call Trace: <TASK> ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211] ieee80211_ba_session_work+0xff/0x2e0 [mac80211] process_one_work+0x29f/0x620 worker_thread+0x4d/0x3d0 ? process_one_work+0x620/0x620 kthread+0xfb/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> |
| CVE-2022-48874 | In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix use-after-free and race in fastrpc_map_find Currently, there is a race window between the point when the mutex is unlocked in fastrpc_map_lookup and the reference count increasing (fastrpc_map_get) in fastrpc_map_find, which can also lead to use-after-free. So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us to both protect the maps list by also taking the &fl->lock spinlock and the reference count, since the spinlock will be released only after. Add take_ref argument to make this suitable for all callers. |
| CVE-2022-48873 | In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Don't remove map on creater_process and device_release Do not remove the map from the list on error path in fastrpc_init_create_process, instead call fastrpc_map_put, to avoid use-after-free. Do not remove it on fastrpc_device_release either, call fastrpc_map_put instead. The fastrpc_free_map is the only proper place to remove the map. This is called only after the reference count is 0. |
| CVE-2022-48872 | In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix use-after-free race condition for maps It is possible that in between calling fastrpc_map_get() until map->fl->lock is taken in fastrpc_free_map(), another thread can call fastrpc_map_lookup() and get a reference to a map that is about to be deleted. Rewrite fastrpc_map_get() to only increase the reference count of a map if it's non-zero. Propagate this to callers so they can know if a map is about to be deleted. Fixes this warning: refcount_t: addition on 0; use-after-free. WARNING: CPU: 5 PID: 10100 at lib/refcount.c:25 refcount_warn_saturate ... Call trace: refcount_warn_saturate [fastrpc_map_get inlined] [fastrpc_map_lookup inlined] fastrpc_map_create fastrpc_internal_invoke fastrpc_device_ioctl __arm64_sys_ioctl invoke_syscall |
| CVE-2022-48871 | In the Linux kernel, the following vulnerability has been resolved: tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on default RX FIFO depth, e.g. 16. Later during serial startup the qcom_geni_serial_port_setup() updates the RX FIFO depth (port->rx_fifo_depth) to match real device capabilities, e.g. to 32. The RX UART handle code will read "port->rx_fifo_depth" number of words into "port->rx_fifo" buffer, thus exceeding the bounds. This can be observed in certain configurations with Qualcomm Bluetooth HCI UART device and KASAN: Bluetooth: hci0: QCA Product ID :0x00000010 Bluetooth: hci0: QCA SOC Version :0x400a0200 Bluetooth: hci0: QCA ROM Version :0x00000200 Bluetooth: hci0: QCA Patch Version:0x00000d2b Bluetooth: hci0: QCA controller version 0x02000200 Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2 Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2) Bluetooth: hci0: QCA Failed to download patch (-2) ================================================================== BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c Write of size 4 at addr ffff279347d578c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x8c/0xb8 print_report+0x188/0x488 kasan_report+0xb4/0x100 __asan_store4+0x80/0xa4 handle_rx_uart+0xa8/0x18c qcom_geni_serial_handle_rx+0x84/0x9c qcom_geni_serial_isr+0x24c/0x760 __handle_irq_event_percpu+0x108/0x500 handle_irq_event+0x6c/0x110 handle_fasteoi_irq+0x138/0x2cc generic_handle_domain_irq+0x48/0x64 If the RX FIFO depth changes after probe, be sure to resize the buffer. |
| CVE-2022-48870 | In the Linux kernel, the following vulnerability has been resolved: tty: fix possible null-ptr-defer in spk_ttyio_release Run the following tests on the qemu platform: syzkaller:~# modprobe speakup_audptr input: Speakup as /devices/virtual/input/input4 initialized device: /dev/synth, node (MAJOR 10, MINOR 125) speakup 3.1.6: initialized synth name on entry is: (null) synth probe spk_ttyio_initialise_ldisc failed because tty_kopen_exclusive returned failed (errno -16), then remove the module, we will get a null-ptr-defer problem, as follow: syzkaller:~# modprobe -r speakup_audptr releasing synth audptr BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 2 PID: 204 Comm: modprobe Not tainted 6.1.0-rc6-dirty #1 RIP: 0010:mutex_lock+0x14/0x30 Call Trace: <TASK> spk_ttyio_release+0x19/0x70 [speakup] synth_release.part.6+0xac/0xc0 [speakup] synth_remove+0x56/0x60 [speakup] __x64_sys_delete_module+0x156/0x250 ? fpregs_assert_state_consistent+0x1d/0x50 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Modules linked in: speakup_audptr(-) speakup Dumping ftrace buffer: in_synth->dev was not initialized during modprobe, so we add check for in_synth->dev to fix this bug. |
| CVE-2022-48869 | In the Linux kernel, the following vulnerability has been resolved: USB: gadgetfs: Fix race between mounting and unmounting The syzbot fuzzer and Gerald Lee have identified a use-after-free bug in the gadgetfs driver, involving processes concurrently mounting and unmounting the gadgetfs filesystem. In particular, gadgetfs_fill_super() can race with gadgetfs_kill_sb(), causing the latter to deallocate the_device while the former is using it. The output from KASAN says, in part: BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:102 [inline] BUG: KASAN: use-after-free in atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline] BUG: KASAN: use-after-free in __refcount_sub_and_test include/linux/refcount.h:272 [inline] BUG: KASAN: use-after-free in __refcount_dec_and_test include/linux/refcount.h:315 [inline] BUG: KASAN: use-after-free in refcount_dec_and_test include/linux/refcount.h:333 [inline] BUG: KASAN: use-after-free in put_dev drivers/usb/gadget/legacy/inode.c:159 [inline] BUG: KASAN: use-after-free in gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086 Write of size 4 at addr ffff8880276d7840 by task syz-executor126/18689 CPU: 0 PID: 18689 Comm: syz-executor126 Not tainted 6.1.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> ... atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline] __refcount_sub_and_test include/linux/refcount.h:272 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] put_dev drivers/usb/gadget/legacy/inode.c:159 [inline] gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 vfs_get_super fs/super.c:1190 [inline] get_tree_single+0xd0/0x160 fs/super.c:1207 vfs_get_tree+0x88/0x270 fs/super.c:1531 vfs_fsconfig_locked fs/fsopen.c:232 [inline] The simplest solution is to ensure that gadgetfs_fill_super() and gadgetfs_kill_sb() are serialized by making them both acquire a new mutex. |
| CVE-2022-48868 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Let probe fail when workqueue cannot be enabled The workqueue is enabled when the appropriate driver is loaded and disabled when the driver is removed. When the driver is removed it assumes that the workqueue was enabled successfully and proceeds to free allocations made during workqueue enabling. Failure during workqueue enabling does not prevent the driver from being loaded. This is because the error path within drv_enable_wq() returns success unless a second failure is encountered during the error path. By returning success it is possible to load the driver even if the workqueue cannot be enabled and allocations that do not exist are attempted to be freed during driver remove. Some examples of problematic flows: (a) idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq(): In above flow, if idxd_wq_request_irq() fails then idxd_wq_unmap_portal() is called on error exit path, but drv_enable_wq() returns 0 because idxd_wq_disable() succeeds. The driver is thus loaded successfully. idxd_dmaengine_drv_remove()->drv_disable_wq()->idxd_wq_unmap_portal() Above flow on driver unload triggers the WARN in devm_iounmap() because the device resource has already been removed during error path of drv_enable_wq(). (b) idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq(): In above flow, if idxd_wq_request_irq() fails then idxd_wq_init_percpu_ref() is never called to initialize the percpu counter, yet the driver loads successfully because drv_enable_wq() returns 0. idxd_dmaengine_drv_remove()->__idxd_wq_quiesce()->percpu_ref_kill(): Above flow on driver unload triggers a BUG when attempting to drop the initial ref of the uninitialized percpu ref: BUG: kernel NULL pointer dereference, address: 0000000000000010 Fix the drv_enable_wq() error path by returning the original error that indicates failure of workqueue enabling. This ensures that the probe fails when an error is encountered and the driver remove paths are only attempted when the workqueue was enabled successfully. |
| CVE-2022-48867 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Prevent use after free on completion memory On driver unload any pending descriptors are flushed at the time the interrupt is freed: idxd_dmaengine_drv_remove() -> drv_disable_wq() -> idxd_wq_free_irq() -> idxd_flush_pending_descs(). If there are any descriptors present that need to be flushed this flow triggers a "not present" page fault as below: BUG: unable to handle page fault for address: ff391c97c70c9040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page The address that triggers the fault is the address of the descriptor that was freed moments earlier via: drv_disable_wq()->idxd_wq_free_resources() Fix the use after free by freeing the descriptors after any possible usage. This is done after idxd_wq_reset() to ensure that the memory remains accessible during possible completion writes by the device. |
| CVE-2022-48866 | In the Linux kernel, the following vulnerability has been resolved: HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts Syzbot reported an slab-out-of-bounds Read in thrustmaster_probe() bug. The root case is in missing validation check of actual number of endpoints. Code should not blindly access usb_host_interface::endpoint array, since it may contain less endpoints than code expects. Fix it by adding missing validaion check and print an error if number of endpoints do not match expected number |
| CVE-2022-48865 | In the Linux kernel, the following vulnerability has been resolved: tipc: fix kernel panic when enabling bearer When enabling a bearer on a node, a kernel panic is observed: [ 4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc] ... [ 4.520030] Call Trace: [ 4.520689] <IRQ> [ 4.521236] tipc_link_build_proto_msg+0x375/0x750 [tipc] [ 4.522654] tipc_link_build_state_msg+0x48/0xc0 [tipc] [ 4.524034] __tipc_node_link_up+0xd7/0x290 [tipc] [ 4.525292] tipc_rcv+0x5da/0x730 [tipc] [ 4.526346] ? __netif_receive_skb_core+0xb7/0xfc0 [ 4.527601] tipc_l2_rcv_msg+0x5e/0x90 [tipc] [ 4.528737] __netif_receive_skb_list_core+0x20b/0x260 [ 4.530068] netif_receive_skb_list_internal+0x1bf/0x2e0 [ 4.531450] ? dev_gro_receive+0x4c2/0x680 [ 4.532512] napi_complete_done+0x6f/0x180 [ 4.533570] virtnet_poll+0x29c/0x42e [virtio_net] ... The node in question is receiving activate messages in another thread after changing bearer status to allow message sending/ receiving in current thread: thread 1 | thread 2 -------- | -------- | tipc_enable_bearer() | test_and_set_bit_lock() | tipc_bearer_xmit_skb() | | tipc_l2_rcv_msg() | tipc_rcv() | __tipc_node_link_up() | tipc_link_build_state_msg() | tipc_link_build_proto_msg() | tipc_mon_prep() | { | ... | // null-pointer dereference | u16 gen = mon->dom_gen; | ... | } // Not being executed yet | tipc_mon_create() | { | ... | // allocate | mon = kzalloc(); | ... | } | Monitoring pointer in thread 2 is dereferenced before monitoring data is allocated in thread 1. This causes kernel panic. This commit fixes it by allocating the monitoring data before enabling the bearer to receive messages. |
| CVE-2022-48864 | In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command request from the driver, presently there is no validation against the number of queue pairs to configure, or even if multiqueue had been negotiated or not is unverified. This may lead to kernel panic due to uninitialized resource for the queues were there any bogus request sent down by untrusted driver. Tie up the loose ends there. |
| CVE-2022-48863 | In the Linux kernel, the following vulnerability has been resolved: mISDN: Fix memory leak in dsp_pipeline_build() dsp_pipeline_build() allocates dup pointer by kstrdup(cfg), but then it updates dup variable by strsep(&dup, "|"). As a result when it calls kfree(dup), the dup variable contains NULL. Found by Linux Driver Verification project (linuxtesting.org) with SVACE. |
| CVE-2022-48862 | In the Linux kernel, the following vulnerability has been resolved: vhost: fix hung thread due to erroneous iotlb entries In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when start is 0 and last is ULONG_MAX. One instance where it can happen is when userspace sends an IOTLB message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an entry with size = 0, start = 0, last = ULONG_MAX ends up in the iotlb. Next time a packet is sent, iotlb_access_ok() loops indefinitely due to that erroneous entry. Call Trace: <TASK> iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340 vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366 vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Reported by syzbot at: https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87 To fix this, do two things: 1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map a range with size 0. 2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX] by splitting it into two entries. |
| CVE-2022-48861 | In the Linux kernel, the following vulnerability has been resolved: vdpa: fix use-after-free on vp_vdpa_remove When vp_vdpa driver is unbind, vp_vdpa is freed in vdpa_unregister_device and then vp_vdpa->mdev.pci_dev is dereferenced in vp_modern_remove, triggering use-after-free. Call Trace of unbinding driver free vp_vdpa : do_syscall_64 vfs_write kernfs_fop_write_iter device_release_driver_internal pci_device_remove vp_vdpa_remove vdpa_unregister_device kobject_release device_release kfree Call Trace of dereference vp_vdpa->mdev.pci_dev: vp_modern_remove pci_release_selected_regions pci_release_region pci_resource_len pci_resource_end (dev)->resource[(bar)].end |
| CVE-2022-48860 | In the Linux kernel, the following vulnerability has been resolved: ethernet: Fix error handling in xemaclite_of_probe This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak. As the remove function do. |
| CVE-2022-48859 | In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak. |
| CVE-2022-48858 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix a race on command flush flow Fix a refcount use after free warning due to a race on command entry. Such race occurs when one of the commands releases its last refcount and frees its index and entry while another process running command flush flow takes refcount to this command entry. The process which handles commands flush may see this command as needed to be flushed if the other process released its refcount but didn't release the index yet. Fix it by adding the needed spin lock. It fixes the following warning trace: refcount_t: addition on 0; use-after-free. WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0 ... RIP: 0010:refcount_warn_saturate+0x80/0xe0 ... Call Trace: <TASK> mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core] mlx5_cmd_flush+0x3a/0xf0 [mlx5_core] enter_error_state+0x44/0x80 [mlx5_core] mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core] process_one_work+0x1be/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x141/0x160 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 </TASK> |
| CVE-2022-48857 | In the Linux kernel, the following vulnerability has been resolved: NFC: port100: fix use-after-free in port100_send_complete Syzbot reported UAF in port100_send_complete(). The root case is in missing usb_kill_urb() calls on error handling path of ->probe function. port100_send_complete() accesses devm allocated memory which will be freed on probe failure. We should kill this urbs before returning an error from probe function to prevent reported use-after-free Fail log: BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 __usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670 ... Allocated by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524 alloc_dr drivers/base/devres.c:116 [inline] devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823 devm_kzalloc include/linux/device.h:209 [inline] port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502 Freed by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:236 [inline] __cache_free mm/slab.c:3437 [inline] kfree+0xf8/0x2b0 mm/slab.c:3794 release_nodes+0x112/0x1a0 drivers/base/devres.c:501 devres_release_all+0x114/0x190 drivers/base/devres.c:530 really_probe+0x626/0xcc0 drivers/base/dd.c:670 |
| CVE-2022-48856 | In the Linux kernel, the following vulnerability has been resolved: gianfar: ethtool: Fix refcount leak in gfar_get_ts_info The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. |
| CVE-2022-48855 | In the Linux kernel, the following vulnerability has been resolved: sctp: fix kernel-infoleak for SCTP sockets syzbot reported a kernel infoleak [1] of 4 bytes. After analysis, it turned out r->idiag_expires is not initialized if inet_sctp_diag_fill() calls inet_diag_msg_common_fill() Make sure to clear idiag_timer/idiag_retrans/idiag_expires and let inet_diag_msg_sctpasoc_fill() fill them again if needed. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668 instrument_copy_to_user include/linux/instrumented.h:121 [inline] copyout lib/iov_iter.c:154 [inline] _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668 copy_to_iter include/linux/uio.h:162 [inline] simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519 __skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533 skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline] netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] __sys_recvfrom+0x795/0xa10 net/socket.c:2097 __do_sys_recvfrom net/socket.c:2115 [inline] __se_sys_recvfrom net/socket.c:2111 [inline] __x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3247 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1158 [inline] netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248 __netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373 netlink_dump_start include/linux/netlink.h:254 [inline] inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341 sock_diag_rcv_msg+0x24a/0x620 netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] sock_write_iter+0x594/0x690 net/socket.c:1061 do_iter_readv_writev+0xa7f/0xc70 do_iter_write+0x52c/0x1500 fs/read_write.c:851 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Bytes 68-71 of 2508 are uninitialized Memory access of size 2508 starts at ffff888114f9b000 Data copied to user address 00007f7fe09ff2e0 CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 |
| CVE-2022-48854 | In the Linux kernel, the following vulnerability has been resolved: net: arc_emac: Fix use after free in arc_mdio_probe() If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free the "bus". But bus->name is still used in the next line, which will lead to a use after free. We can fix it by putting the name in a local variable and make the bus->name point to the rodata section "name",then use the name in the error message without referring to bus to avoid the uaf. |
| CVE-2022-48853 | In the Linux kernel, the following vulnerability has been resolved: swiotlb: fix info leak with DMA_FROM_DEVICE The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce. |
| CVE-2022-48852 | In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hdmi: Unregister codec device on unbind On bind we will register the HDMI codec device but we don't unregister it on unbind, leading to a device leakage. Unregister our device at unbind. |
| CVE-2022-48851 | In the Linux kernel, the following vulnerability has been resolved: staging: gdm724x: fix use after free in gdm_lte_rx() The netif_rx_ni() function frees the skb so we can't dereference it to save the skb->len. |
| CVE-2022-48850 | In the Linux kernel, the following vulnerability has been resolved: net-sysfs: add check for netdevice being present to speed_show When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. |
| CVE-2022-48849 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: bypass tiling flag check in virtual display case (v2) vkms leverages common amdgpu framebuffer creation, and also as it does not support FB modifier, there is no need to check tiling flags when initing framebuffer when virtual display is enabled. This can fix below calltrace: amdgpu 0000:00:08.0: GFX9+ requires FB check based on format modifier WARNING: CPU: 0 PID: 1023 at drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:1150 amdgpu_display_framebuffer_init+0x8e7/0xb40 [amdgpu] v2: check adev->enable_virtual_display instead as vkms can be enabled in bare metal as well. |
| CVE-2022-48848 | In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Do not unregister events twice Nicolas reported that using: # trace-cmd record -e all -M 10 -p osnoise --poll Resulted in the following kernel warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1217 at kernel/tracepoint.c:404 tracepoint_probe_unregister+0x280/0x370 [...] CPU: 0 PID: 1217 Comm: trace-cmd Not tainted 5.17.0-rc6-next-20220307-nico+ #19 RIP: 0010:tracepoint_probe_unregister+0x280/0x370 [...] CR2: 00007ff919b29497 CR3: 0000000109da4005 CR4: 0000000000170ef0 Call Trace: <TASK> osnoise_workload_stop+0x36/0x90 tracing_set_tracer+0x108/0x260 tracing_set_trace_write+0x94/0xd0 ? __check_object_size.part.0+0x10a/0x150 ? selinux_file_permission+0x104/0x150 vfs_write+0xb5/0x290 ksys_write+0x5f/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7ff919a18127 [...] ---[ end trace 0000000000000000 ]--- The warning complains about an attempt to unregister an unregistered tracepoint. This happens on trace-cmd because it first stops tracing, and then switches the tracer to nop. Which is equivalent to: # cd /sys/kernel/tracing/ # echo osnoise > current_tracer # echo 0 > tracing_on # echo nop > current_tracer The osnoise tracer stops the workload when no trace instance is actually collecting data. This can be caused both by disabling tracing or disabling the tracer itself. To avoid unregistering events twice, use the existing trace_osnoise_callback_enabled variable to check if the events (and the workload) are actually active before trying to deactivate them. |
| CVE-2022-48847 | In the Linux kernel, the following vulnerability has been resolved: watch_queue: Fix filter limit check In watch_queue_set_filter(), there are a couple of places where we check that the filter type value does not exceed what the type_filter bitmap can hold. One place calculates the number of bits by: if (tf[i].type >= sizeof(wfilter->type_filter) * 8) which is fine, but the second does: if (tf[i].type >= sizeof(wfilter->type_filter) * BITS_PER_LONG) which is not. This can lead to a couple of out-of-bounds writes due to a too-large type: (1) __set_bit() on wfilter->type_filter (2) Writing more elements in wfilter->filters[] than we allocated. Fix this by just using the proper WATCH_TYPE__NR instead, which is the number of types we actually know about. The bug may cause an oops looking something like: BUG: KASAN: slab-out-of-bounds in watch_queue_set_filter+0x659/0x740 Write of size 4 at addr ffff88800d2c66bc by task watch_queue_oob/611 ... Call Trace: <TASK> dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x150 ... kasan_report.cold+0x7f/0x11b ... watch_queue_set_filter+0x659/0x740 ... __x64_sys_ioctl+0x127/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Allocated by task 611: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 watch_queue_set_filter+0x23a/0x740 __x64_sys_ioctl+0x127/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88800d2c66a0 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 28 bytes inside of 32-byte region [ffff88800d2c66a0, ffff88800d2c66c0) |
| CVE-2022-48846 | In the Linux kernel, the following vulnerability has been resolved: block: release rq qos structures for queue without disk blkcg_init_queue() may add rq qos structures to request queue, previously blk_cleanup_queue() calls rq_qos_exit() to release them, but commit 8e141f9eb803 ("block: drain file system I/O on del_gendisk") moves rq_qos_exit() into del_gendisk(), so memory leak is caused because queues may not have disk, such as un-present scsi luns, nvme admin queue, ... Fixes the issue by adding rq_qos_exit() to blk_cleanup_queue() back. BTW, v5.18 won't need this patch any more since we move blkcg_init_queue()/blkcg_exit_queue() into disk allocation/release handler, and patches have been in for-5.18/block. |
| CVE-2022-48845 | In the Linux kernel, the following vulnerability has been resolved: MIPS: smp: fill in sibling and core maps earlier After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle), 2-core 2-thread-per-core interAptiv (CPS-driven) started emitting the following: [ 0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi)) [ 0.048183] ------------[ cut here ]------------ [ 0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240 [ 0.048220] Modules linked in: [ 0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35 b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f [ 0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1 [ 0.048278] 830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000 [ 0.048307] 00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000 [ 0.048334] 00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34 [ 0.048361] 817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933 [ 0.048389] ... [ 0.048396] Call Trace: [ 0.048399] [<8105a7bc>] show_stack+0x3c/0x140 [ 0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80 [ 0.048440] [<8108b5c0>] __warn+0xc0/0xf4 [ 0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c [ 0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240 [ 0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80 [ 0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140 [ 0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140 [ 0.048523] [<8106593c>] start_secondary+0xbc/0x280 [ 0.048539] [ 0.048543] ---[ end trace 0000000000000000 ]--- [ 0.048636] Synchronize counters for CPU 1: done. ...for each but CPU 0/boot. Basic debug printks right before the mentioned line say: [ 0.048170] CPU: 1, smt_mask: So smt_mask, which is sibling mask obviously, is empty when entering the function. This is critical, as sched_core_cpu_starting() calculates core-scheduling parameters only once per CPU start, and it's crucial to have all the parameters filled in at that moment (at least it uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on MIPS). A bit of debugging led me to that set_cpu_sibling_map() performing the actual map calculation, was being invocated after notify_cpu_start(), and exactly the latter function starts CPU HP callback round (sched_core_cpu_starting() is basically a CPU HP callback). While the flow is same on ARM64 (maps after the notifier, although before calling set_cpu_online()), x86 started calculating sibling maps earlier than starting the CPU HP callbacks in Linux 4.14 (see [0] for the reference). Neither me nor my brief tests couldn't find any potential caveats in calculating the maps right after performing delay calibration, but the WARN splat is now gone. The very same debug prints now yield exactly what I expected from them: [ 0.048433] CPU: 1, smt_mask: 0-1 [0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef |
| CVE-2022-48844 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix leaking sent_cmd skb sent_cmd memory is not freed before freeing hci_dev causing it to leak it contents. |
| CVE-2022-48843 | In the Linux kernel, the following vulnerability has been resolved: drm/vrr: Set VRR capable prop only if it is attached to connector VRR capable property is not attached by default to the connector It is attached only if VRR is supported. So if the driver tries to call drm core set prop function without it being attached that causes NULL dereference. |
| CVE-2022-48842 | In the Linux kernel, the following vulnerability has been resolved: ice: Fix race condition during interface enslave Commit 5dbbbd01cbba83 ("ice: Avoid RTNL lock when re-creating auxiliary device") changes a process of re-creation of aux device so ice_plug_aux_dev() is called from ice_service_task() context. This unfortunately opens a race window that can result in dead-lock when interface has left LAG and immediately enters LAG again. Reproducer: ``` #!/bin/sh ip link add lag0 type bond mode 1 miimon 100 ip link set lag0 for n in {1..10}; do echo Cycle: $n ip link set ens7f0 master lag0 sleep 1 ip link set ens7f0 nomaster done ``` This results in: [20976.208697] Workqueue: ice ice_service_task [ice] [20976.213422] Call Trace: [20976.215871] __schedule+0x2d1/0x830 [20976.219364] schedule+0x35/0xa0 [20976.222510] schedule_preempt_disabled+0xa/0x10 [20976.227043] __mutex_lock.isra.7+0x310/0x420 [20976.235071] enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core] [20976.251215] ib_enum_roce_netdev+0xa4/0xe0 [ib_core] [20976.256192] ib_cache_setup_one+0x33/0xa0 [ib_core] [20976.261079] ib_register_device+0x40d/0x580 [ib_core] [20976.266139] irdma_ib_register_device+0x129/0x250 [irdma] [20976.281409] irdma_probe+0x2c1/0x360 [irdma] [20976.285691] auxiliary_bus_probe+0x45/0x70 [20976.289790] really_probe+0x1f2/0x480 [20976.298509] driver_probe_device+0x49/0xc0 [20976.302609] bus_for_each_drv+0x79/0xc0 [20976.306448] __device_attach+0xdc/0x160 [20976.310286] bus_probe_device+0x9d/0xb0 [20976.314128] device_add+0x43c/0x890 [20976.321287] __auxiliary_device_add+0x43/0x60 [20976.325644] ice_plug_aux_dev+0xb2/0x100 [ice] [20976.330109] ice_service_task+0xd0c/0xed0 [ice] [20976.342591] process_one_work+0x1a7/0x360 [20976.350536] worker_thread+0x30/0x390 [20976.358128] kthread+0x10a/0x120 [20976.365547] ret_from_fork+0x1f/0x40 ... [20976.438030] task:ip state:D stack: 0 pid:213658 ppid:213627 flags:0x00004084 [20976.446469] Call Trace: [20976.448921] __schedule+0x2d1/0x830 [20976.452414] schedule+0x35/0xa0 [20976.455559] schedule_preempt_disabled+0xa/0x10 [20976.460090] __mutex_lock.isra.7+0x310/0x420 [20976.464364] device_del+0x36/0x3c0 [20976.467772] ice_unplug_aux_dev+0x1a/0x40 [ice] [20976.472313] ice_lag_event_handler+0x2a2/0x520 [ice] [20976.477288] notifier_call_chain+0x47/0x70 [20976.481386] __netdev_upper_dev_link+0x18b/0x280 [20976.489845] bond_enslave+0xe05/0x1790 [bonding] [20976.494475] do_setlink+0x336/0xf50 [20976.502517] __rtnl_newlink+0x529/0x8b0 [20976.543441] rtnl_newlink+0x43/0x60 [20976.546934] rtnetlink_rcv_msg+0x2b1/0x360 [20976.559238] netlink_rcv_skb+0x4c/0x120 [20976.563079] netlink_unicast+0x196/0x230 [20976.567005] netlink_sendmsg+0x204/0x3d0 [20976.570930] sock_sendmsg+0x4c/0x50 [20976.574423] ____sys_sendmsg+0x1eb/0x250 [20976.586807] ___sys_sendmsg+0x7c/0xc0 [20976.606353] __sys_sendmsg+0x57/0xa0 [20976.609930] do_syscall_64+0x5b/0x1a0 [20976.613598] entry_SYSCALL_64_after_hwframe+0x65/0xca 1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev() is called from ice_service_task() context, aux device is created and associated device->lock is taken. 2. Command 'ip link ... set master...' calls ice's notifier under RTNL lock and that notifier calls ice_unplug_aux_dev(). That function tries to take aux device->lock but this is already taken by ice_plug_aux_dev() in step 1 3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already taken in step 2 4. Dead-lock The patch fixes this issue by following changes: - Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev() call in ice_service_task() - The bit is checked in ice_clear_rdma_cap() and only if it is not set then ice_unplug_aux_dev() is called. If it is set (in other words plugging of aux device was requested and ice_plug_aux_dev() is potentially running) then the function only clears the ---truncated--- |
| CVE-2022-48841 | In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats() It is possible to do NULL pointer dereference in routine that updates Tx ring stats. Currently only stats and bytes are updated when ring pointer is valid, but later on ring is accessed to propagate gathered Tx stats onto VSI stats. Change the existing logic to move to next ring when ring is NULL. |
| CVE-2022-48840 | In the Linux kernel, the following vulnerability has been resolved: iavf: Fix hang during reboot/shutdown Recent commit 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") adds a wait-loop at the beginning of iavf_remove() to ensure that port initialization is finished prior unregistering net device. This causes a regression in reboot/shutdown scenario because in this case callback iavf_shutdown() is called and this callback detaches the device, makes it down if it is running and sets its state to __IAVF_REMOVE. Later shutdown callback of associated PF driver (e.g. ice_shutdown) is called. That callback calls among other things sriov_disable() that calls indirectly iavf_remove() (see stack trace below). As the adapter state is already __IAVF_REMOVE then the mentioned loop is end-less and shutdown process hangs. The patch fixes this by checking adapter's state at the beginning of iavf_remove() and skips the rest of the function if the adapter is already in remove state (shutdown is in progress). Reproducer: 1. Create VF on PF driven by ice or i40e driver 2. Ensure that the VF is bound to iavf driver 3. Reboot [52625.981294] sysrq: SysRq : Show Blocked State [52625.988377] task:reboot state:D stack: 0 pid:17359 ppid: 1 f2 [52625.996732] Call Trace: [52625.999187] __schedule+0x2d1/0x830 [52626.007400] schedule+0x35/0xa0 [52626.010545] schedule_hrtimeout_range_clock+0x83/0x100 [52626.020046] usleep_range+0x5b/0x80 [52626.023540] iavf_remove+0x63/0x5b0 [iavf] [52626.027645] pci_device_remove+0x3b/0xc0 [52626.031572] device_release_driver_internal+0x103/0x1f0 [52626.036805] pci_stop_bus_device+0x72/0xa0 [52626.040904] pci_stop_and_remove_bus_device+0xe/0x20 [52626.045870] pci_iov_remove_virtfn+0xba/0x120 [52626.050232] sriov_disable+0x2f/0xe0 [52626.053813] ice_free_vfs+0x7c/0x340 [ice] [52626.057946] ice_remove+0x220/0x240 [ice] [52626.061967] ice_shutdown+0x16/0x50 [ice] [52626.065987] pci_device_shutdown+0x34/0x60 [52626.070086] device_shutdown+0x165/0x1c5 [52626.074011] kernel_restart+0xe/0x30 [52626.077593] __do_sys_reboot+0x1d2/0x210 [52626.093815] do_syscall_64+0x5b/0x1a0 [52626.097483] entry_SYSCALL_64_after_hwframe+0x65/0xca |
| CVE-2022-48839 | In the Linux kernel, the following vulnerability has been resolved: net/packet: fix slab-out-of-bounds access in packet_recvmsg() syzbot found that when an AF_PACKET socket is using PACKET_COPY_THRESH and mmap operations, tpacket_rcv() is queueing skbs with garbage in skb->cb[], triggering a too big copy [1] Presumably, users of af_packet using mmap() already gets correct metadata from the mapped buffer, we can simply make sure to clear 12 bytes that might be copied to user space later. BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline] BUG: KASAN: stack-out-of-bounds in packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489 Write of size 165 at addr ffffc9000385fb78 by task syz-executor233/3631 CPU: 0 PID: 3631 Comm: syz-executor233 Not tainted 5.17.0-rc7-syzkaller-02396-g0b3660695e80 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xf/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189 memcpy+0x39/0x60 mm/kasan/shadow.c:66 memcpy include/linux/fortify-string.h:225 [inline] packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fdfd5954c29 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcf8e71e48 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdfd5954c29 RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000005 RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffcf8e71e60 R13: 00000000000f4240 R14: 000000000000c1ff R15: 00007ffcf8e71e54 </TASK> addr ffffc9000385fb78 is located in stack of task syz-executor233/3631 at offset 32 in frame: ____sys_recvmsg+0x0/0x600 include/linux/uio.h:246 this frame has 1 object: [32, 160) 'addr' Memory state around the buggy address: ffffc9000385fa80: 00 04 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 ffffc9000385fb00: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 >ffffc9000385fb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3 ^ ffffc9000385fc00: f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 f1 ffffc9000385fc80: f1 f1 f1 00 f2 f2 f2 00 f2 f2 f2 00 00 00 00 00 ================================================================== |
| CVE-2022-48838 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: Fix use-after-free bug by not setting udc->dev.driver The syzbot fuzzer found a use-after-free bug: BUG: KASAN: use-after-free in dev_uevent+0x712/0x780 drivers/base/core.c:2320 Read of size 8 at addr ffff88802b934098 by task udevd/3689 CPU: 2 PID: 3689 Comm: udevd Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 dev_uevent+0x712/0x780 drivers/base/core.c:2320 uevent_show+0x1b8/0x380 drivers/base/core.c:2391 dev_attr_show+0x4b/0x90 drivers/base/core.c:2094 Although the bug manifested in the driver core, the real cause was a race with the gadget core. dev_uevent() does: if (dev->driver) add_uevent_var(env, "DRIVER=%s", dev->driver->name); and between the test and the dereference of dev->driver, the gadget core sets dev->driver to NULL. The race wouldn't occur if the gadget core registered its devices on a real bus, using the standard synchronization techniques of the driver core. However, it's not necessary to make such a large change in order to fix this bug; all we need to do is make sure that udc->dev.driver is always NULL. In fact, there is no reason for udc->dev.driver ever to be set to anything, let alone to the value it currently gets: the address of the gadget's driver. After all, a gadget driver only knows how to manage a gadget, not how to manage a UDC. This patch simply removes the statements in the gadget core that touch udc->dev.driver. |
| CVE-2022-48837 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: rndis: prevent integer overflow in rndis_set_response() If "BufOffset" is very large the "BufOffset + 8" operation can have an integer overflow. |
| CVE-2022-48836 | In the Linux kernel, the following vulnerability has been resolved: Input: aiptek - properly check endpoint type Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. There was a check for the number of endpoints, but not for the type of endpoint. Fix it by replacing old desc.bNumEndpoints check with usb_find_common_endpoints() helper for finding endpoints Fail log: usb 5-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Workqueue: usb_hub_wq hub_event ... Call Trace: <TASK> aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830 input_open_device+0x1bb/0x320 drivers/input/input.c:629 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593 |
| CVE-2022-48835 | In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Page fault in reply q processing A page fault was encountered in mpt3sas on a LUN reset error path: [ 145.763216] mpt3sas_cm1: Task abort tm failed: handle(0x0002),timeout(30) tr_method(0x0) smid(3) msix_index(0) [ 145.778932] scsi 1:0:0:0: task abort: FAILED scmd(0x0000000024ba29a2) [ 145.817307] scsi 1:0:0:0: attempting device reset! scmd(0x0000000024ba29a2) [ 145.827253] scsi 1:0:0:0: [sg1] tag#2 CDB: Receive Diagnostic 1c 01 01 ff fc 00 [ 145.837617] scsi target1:0:0: handle(0x0002), sas_address(0x500605b0000272b9), phy(0) [ 145.848598] scsi target1:0:0: enclosure logical id(0x500605b0000272b8), slot(0) [ 149.858378] mpt3sas_cm1: Poll ReplyDescriptor queues for completion of smid(0), task_type(0x05), handle(0x0002) [ 149.875202] BUG: unable to handle page fault for address: 00000007fffc445d [ 149.885617] #PF: supervisor read access in kernel mode [ 149.894346] #PF: error_code(0x0000) - not-present page [ 149.903123] PGD 0 P4D 0 [ 149.909387] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 149.917417] CPU: 24 PID: 3512 Comm: scsi_eh_1 Kdump: loaded Tainted: G S O 5.10.89-altav-1 #1 [ 149.934327] Hardware name: DDN 200NVX2 /200NVX2-MB , BIOS ATHG2.2.02.01 09/10/2021 [ 149.951871] RIP: 0010:_base_process_reply_queue+0x4b/0x900 [mpt3sas] [ 149.961889] Code: 0f 84 22 02 00 00 8d 48 01 49 89 fd 48 8d 57 38 f0 0f b1 4f 38 0f 85 d8 01 00 00 49 8b 45 10 45 31 e4 41 8b 55 0c 48 8d 1c d0 <0f> b6 03 83 e0 0f 3c 0f 0f 85 a2 00 00 00 e9 e6 01 00 00 0f b7 ee [ 149.991952] RSP: 0018:ffffc9000f1ebcb8 EFLAGS: 00010246 [ 150.000937] RAX: 0000000000000055 RBX: 00000007fffc445d RCX: 000000002548f071 [ 150.011841] RDX: 00000000ffff8881 RSI: 0000000000000001 RDI: ffff888125ed50d8 [ 150.022670] RBP: 0000000000000000 R08: 0000000000000000 R09: c0000000ffff7fff [ 150.033445] R10: ffffc9000f1ebb68 R11: ffffc9000f1ebb60 R12: 0000000000000000 [ 150.044204] R13: ffff888125ed50d8 R14: 0000000000000080 R15: 34cdc00034cdea80 [ 150.054963] FS: 0000000000000000(0000) GS:ffff88dfaf200000(0000) knlGS:0000000000000000 [ 150.066715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 150.076078] CR2: 00000007fffc445d CR3: 000000012448a006 CR4: 0000000000770ee0 [ 150.086887] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 150.097670] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 150.108323] PKRU: 55555554 [ 150.114690] Call Trace: [ 150.120497] ? printk+0x48/0x4a [ 150.127049] mpt3sas_scsih_issue_tm.cold.114+0x2e/0x2b3 [mpt3sas] [ 150.136453] mpt3sas_scsih_issue_locked_tm+0x86/0xb0 [mpt3sas] [ 150.145759] scsih_dev_reset+0xea/0x300 [mpt3sas] [ 150.153891] scsi_eh_ready_devs+0x541/0x9e0 [scsi_mod] [ 150.162206] ? __scsi_host_match+0x20/0x20 [scsi_mod] [ 150.170406] ? scsi_try_target_reset+0x90/0x90 [scsi_mod] [ 150.178925] ? blk_mq_tagset_busy_iter+0x45/0x60 [ 150.186638] ? scsi_try_target_reset+0x90/0x90 [scsi_mod] [ 150.195087] scsi_error_handler+0x3a5/0x4a0 [scsi_mod] [ 150.203206] ? __schedule+0x1e9/0x610 [ 150.209783] ? scsi_eh_get_sense+0x210/0x210 [scsi_mod] [ 150.217924] kthread+0x12e/0x150 [ 150.224041] ? kthread_worker_fn+0x130/0x130 [ 150.231206] ret_from_fork+0x1f/0x30 This is caused by mpt3sas_base_sync_reply_irqs() using an invalid reply_q pointer outside of the list_for_each_entry() loop. At the end of the full list traversal the pointer is invalid. Move the _base_process_reply_queue() call inside of the loop. |
| CVE-2022-48834 | In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: Fix bug in pipe direction for control transfers The syzbot fuzzer reported a minor bug in the usbtmc driver: usb 5-1: BOGUS control dir, pipe 80001e80 doesn't match bRequestType 0 WARNING: CPU: 0 PID: 3813 at drivers/usb/core/urb.c:412 usb_submit_urb+0x13a5/0x1970 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 3813 Comm: syz-executor122 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0 ... Call Trace: <TASK> usb_start_wait_urb+0x113/0x530 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x2a5/0x4b0 drivers/usb/core/message.c:153 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1947 [inline] The problem is that usbtmc_ioctl_request() uses usb_rcvctrlpipe() for all of its transfers, whether they are in or out. It's easy to fix. |
| CVE-2022-48833 | In the Linux kernel, the following vulnerability has been resolved: btrfs: skip reserved bytes warning on unmount after log cleanup failure After the recent changes made by commit c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it") and its followup fix, commit 651740a5024117 ("btrfs: check WRITE_ERR when trying to read an extent buffer"), we can now end up not cleaning up space reservations of log tree extent buffers after a transaction abort happens, as well as not cleaning up still dirty extent buffers. This happens because if writeback for a log tree extent buffer failed, then we have cleared the bit EXTENT_BUFFER_UPTODATE from the extent buffer and we have also set the bit EXTENT_BUFFER_WRITE_ERR on it. Later on, when trying to free the log tree with free_log_tree(), which iterates over the tree, we can end up getting an -EIO error when trying to read a node or a leaf, since read_extent_buffer_pages() returns -EIO if an extent buffer does not have EXTENT_BUFFER_UPTODATE set and has the EXTENT_BUFFER_WRITE_ERR bit set. Getting that -EIO means that we return immediately as we can not iterate over the entire tree. In that case we never update the reserved space for an extent buffer in the respective block group and space_info object. When this happens we get the following traces when unmounting the fs: [174957.284509] BTRFS: error (device dm-0) in cleanup_transaction:1913: errno=-5 IO failure [174957.286497] BTRFS: error (device dm-0) in free_log_tree:3420: errno=-5 IO failure [174957.399379] ------------[ cut here ]------------ [174957.402497] WARNING: CPU: 2 PID: 3206883 at fs/btrfs/block-group.c:127 btrfs_put_block_group+0x77/0xb0 [btrfs] [174957.407523] Modules linked in: btrfs overlay dm_zero (...) [174957.424917] CPU: 2 PID: 3206883 Comm: umount Tainted: G W 5.16.0-rc5-btrfs-next-109 #1 [174957.426689] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [174957.428716] RIP: 0010:btrfs_put_block_group+0x77/0xb0 [btrfs] [174957.429717] Code: 21 48 8b bd (...) [174957.432867] RSP: 0018:ffffb70d41cffdd0 EFLAGS: 00010206 [174957.433632] RAX: 0000000000000001 RBX: ffff8b09c3848000 RCX: ffff8b0758edd1c8 [174957.434689] RDX: 0000000000000001 RSI: ffffffffc0b467e7 RDI: ffff8b0758edd000 [174957.436068] RBP: ffff8b0758edd000 R08: 0000000000000000 R09: 0000000000000000 [174957.437114] R10: 0000000000000246 R11: 0000000000000000 R12: ffff8b09c3848148 [174957.438140] R13: ffff8b09c3848198 R14: ffff8b0758edd188 R15: dead000000000100 [174957.439317] FS: 00007f328fb82800(0000) GS:ffff8b0a2d200000(0000) knlGS:0000000000000000 [174957.440402] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [174957.441164] CR2: 00007fff13563e98 CR3: 0000000404f4e005 CR4: 0000000000370ee0 [174957.442117] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [174957.443076] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [174957.443948] Call Trace: [174957.444264] <TASK> [174957.444538] btrfs_free_block_groups+0x255/0x3c0 [btrfs] [174957.445238] close_ctree+0x301/0x357 [btrfs] [174957.445803] ? call_rcu+0x16c/0x290 [174957.446250] generic_shutdown_super+0x74/0x120 [174957.446832] kill_anon_super+0x14/0x30 [174957.447305] btrfs_kill_super+0x12/0x20 [btrfs] [174957.447890] deactivate_locked_super+0x31/0xa0 [174957.448440] cleanup_mnt+0x147/0x1c0 [174957.448888] task_work_run+0x5c/0xa0 [174957.449336] exit_to_user_mode_prepare+0x1e5/0x1f0 [174957.449934] syscall_exit_to_user_mode+0x16/0x40 [174957.450512] do_syscall_64+0x48/0xc0 [174957.450980] entry_SYSCALL_64_after_hwframe+0x44/0xae [174957.451605] RIP: 0033:0x7f328fdc4a97 [174957.452059] Code: 03 0c 00 f7 (...) [174957.454320] RSP: 002b:00007fff13564ec8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [174957.455262] RAX: 0000000000000000 RBX: 00007f328feea264 RCX: 00007f328fdc4a97 [174957.456131] RDX: 0000000000000000 RSI: 00000000000000 ---truncated--- |
| CVE-2022-48832 | In the Linux kernel, the following vulnerability has been resolved: audit: don't deref the syscall args when checking the openat2 open_how::flags As reported by Jeff, dereferencing the openat2 syscall argument in audit_match_perm() to obtain the open_how::flags can result in an oops/page-fault. This patch fixes this by using the open_how struct that we store in the audit_context with audit_openat2_how(). Independent of this patch, Richard Guy Briggs posted a similar patch to the audit mailing list roughly 40 minutes after this patch was posted. |
| CVE-2022-48831 | In the Linux kernel, the following vulnerability has been resolved: ima: fix reference leak in asymmetric_verify() Don't leak a reference to the key if its algorithm is unknown. |
| CVE-2022-48830 | In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix potential CAN frame reception race in isotp_rcv() When receiving a CAN frame the current code logic does not consider concurrently receiving processes which do not show up in real world usage. Ziyang Xuan writes: The following syz problem is one of the scenarios. so->rx.len is changed by isotp_rcv_ff() during isotp_rcv_cf(), so->rx.len equals 0 before alloc_skb() and equals 4096 after alloc_skb(). That will trigger skb_over_panic() in skb_put(). ======================================================= CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc8-syzkaller #0 RIP: 0010:skb_panic+0x16c/0x16e net/core/skbuff.c:113 Call Trace: <TASK> skb_over_panic net/core/skbuff.c:118 [inline] skb_put.cold+0x24/0x24 net/core/skbuff.c:1990 isotp_rcv_cf net/can/isotp.c:570 [inline] isotp_rcv+0xa38/0x1e30 net/can/isotp.c:668 deliver net/can/af_can.c:574 [inline] can_rcv_filter+0x445/0x8d0 net/can/af_can.c:635 can_receive+0x31d/0x580 net/can/af_can.c:665 can_rcv+0x120/0x1c0 net/can/af_can.c:696 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5465 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5579 Therefore we make sure the state changes and data structures stay consistent at CAN frame reception time by adding a spin_lock in isotp_rcv(). This fixes the issue reported by syzkaller but does not affect real world operation. |
| CVE-2022-48829 | In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes iattr::ia_size is a loff_t, so these NFSv3 procedures must be careful to deal with incoming client size values that are larger than s64_max without corrupting the value. Silently capping the value results in storing a different value than the client passed in which is unexpected behavior, so remove the min_t() check in decode_sattr3(). Note that RFC 1813 permits only the WRITE procedure to return NFS3ERR_FBIG. We believe that NFSv3 reference implementations also return NFS3ERR_FBIG when ia_size is too large. |
| CVE-2022-48828 | In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix ia_size underflow iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and NFSv4 both define file size as an unsigned 64-bit type. Thus there is a range of valid file size values an NFS client can send that is already larger than Linux can handle. Currently decode_fattr4() dumps a full u64 value into ia_size. If that value happens to be larger than S64_MAX, then ia_size underflows. I'm about to fix up the NFSv3 behavior as well, so let's catch the underflow in the common code path: nfsd_setattr(). |
| CVE-2022-48827 | In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix the behavior of READ near OFFSET_MAX Dan Aloni reports: > Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to > the RPC read layers") on the client, a read of 0xfff is aligned up > to server rsize of 0x1000. > > As a result, in a test where the server has a file of size > 0x7fffffffffffffff, and the client tries to read from the offset > 0x7ffffffffffff000, the read causes loff_t overflow in the server > and it returns an NFS code of EINVAL to the client. The client as > a result indefinitely retries the request. The Linux NFS client does not handle NFS?ERR_INVAL, even though all NFS specifications permit servers to return that status code for a READ. Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed and return a short result. Set the EOF flag in the result to prevent the client from retrying the READ request. This behavior appears to be consistent with Solaris NFS servers. Note that NFSv3 and NFSv4 use u64 offset values on the wire. These must be converted to loff_t internally before use -- an implicit type cast is not adequate for this purpose. Otherwise VFS checks against sb->s_maxbytes do not work properly. |
| CVE-2022-48826 | In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Fix deadlock on DSI device attach error DSI device attach to DSI host will be done with host device's lock held. Un-registering host in "device attach" error path (ex: probe retry) will result in deadlock with below call trace and non operational DSI display. Startup Call trace: [ 35.043036] rt_mutex_slowlock.constprop.21+0x184/0x1b8 [ 35.043048] mutex_lock_nested+0x7c/0xc8 [ 35.043060] device_del+0x4c/0x3e8 [ 35.043075] device_unregister+0x20/0x40 [ 35.043082] mipi_dsi_remove_device_fn+0x18/0x28 [ 35.043093] device_for_each_child+0x68/0xb0 [ 35.043105] mipi_dsi_host_unregister+0x40/0x90 [ 35.043115] vc4_dsi_host_attach+0xf0/0x120 [vc4] [ 35.043199] mipi_dsi_attach+0x30/0x48 [ 35.043209] tc358762_probe+0x128/0x164 [tc358762] [ 35.043225] mipi_dsi_drv_probe+0x28/0x38 [ 35.043234] really_probe+0xc0/0x318 [ 35.043244] __driver_probe_device+0x80/0xe8 [ 35.043254] driver_probe_device+0xb8/0x118 [ 35.043263] __device_attach_driver+0x98/0xe8 [ 35.043273] bus_for_each_drv+0x84/0xd8 [ 35.043281] __device_attach+0xf0/0x150 [ 35.043290] device_initial_probe+0x1c/0x28 [ 35.043300] bus_probe_device+0xa4/0xb0 [ 35.043308] deferred_probe_work_func+0xa0/0xe0 [ 35.043318] process_one_work+0x254/0x700 [ 35.043330] worker_thread+0x4c/0x448 [ 35.043339] kthread+0x19c/0x1a8 [ 35.043348] ret_from_fork+0x10/0x20 Shutdown Call trace: [ 365.565417] Call trace: [ 365.565423] __switch_to+0x148/0x200 [ 365.565452] __schedule+0x340/0x9c8 [ 365.565467] schedule+0x48/0x110 [ 365.565479] schedule_timeout+0x3b0/0x448 [ 365.565496] wait_for_completion+0xac/0x138 [ 365.565509] __flush_work+0x218/0x4e0 [ 365.565523] flush_work+0x1c/0x28 [ 365.565536] wait_for_device_probe+0x68/0x158 [ 365.565550] device_shutdown+0x24/0x348 [ 365.565561] kernel_restart_prepare+0x40/0x50 [ 365.565578] kernel_restart+0x20/0x70 [ 365.565591] __do_sys_reboot+0x10c/0x220 [ 365.565605] __arm64_sys_reboot+0x2c/0x38 [ 365.565619] invoke_syscall+0x4c/0x110 [ 365.565634] el0_svc_common.constprop.3+0xfc/0x120 [ 365.565648] do_el0_svc+0x2c/0x90 [ 365.565661] el0_svc+0x4c/0xf0 [ 365.565671] el0t_64_sync_handler+0x90/0xb8 [ 365.565682] el0t_64_sync+0x180/0x184 |
| CVE-2022-48825 | In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Add stag_work to all the vports Call trace seen when creating NPIV ports, only 32 out of 64 show online. stag work was not initialized for vport, hence initialize the stag work. WARNING: CPU: 8 PID: 645 at kernel/workqueue.c:1635 __queue_delayed_work+0x68/0x80 CPU: 8 PID: 645 Comm: kworker/8:1 Kdump: loaded Tainted: G IOE --------- -- 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge MX740c/0177V9, BIOS 2.12.2 07/09/2021 Workqueue: events fc_lport_timeout [libfc] RIP: 0010:__queue_delayed_work+0x68/0x80 Code: 89 b2 88 00 00 00 44 89 82 90 00 00 00 48 01 c8 48 89 42 50 41 81 f8 00 20 00 00 75 1d e9 60 24 07 00 44 89 c7 e9 98 f6 ff ff <0f> 0b eb c5 0f 0b eb a1 0f 0b eb a7 0f 0b eb ac 44 89 c6 e9 40 23 RSP: 0018:ffffae514bc3be40 EFLAGS: 00010006 RAX: ffff8d25d6143750 RBX: 0000000000000202 RCX: 0000000000000002 RDX: ffff8d2e31383748 RSI: ffff8d25c000d600 RDI: ffff8d2e31383788 RBP: ffff8d2e31380de0 R08: 0000000000002000 R09: ffff8d2e31383750 R10: ffffffffc0c957e0 R11: ffff8d2624800000 R12: ffff8d2e31380a58 R13: ffff8d2d915eb000 R14: ffff8d25c499b5c0 R15: ffff8d2e31380e18 FS: 0000000000000000(0000) GS:ffff8d2d1fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fd0484b8b8 CR3: 00000008ffc10006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: queue_delayed_work_on+0x36/0x40 qedf_elsct_send+0x57/0x60 [qedf] fc_lport_enter_flogi+0x90/0xc0 [libfc] fc_lport_timeout+0xb7/0x140 [libfc] process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x35/0x40 ---[ end trace 008f00f722f2c2ff ]-- Initialize stag work for all the vports. |
| CVE-2022-48824 | In the Linux kernel, the following vulnerability has been resolved: scsi: myrs: Fix crash in error case In myrs_detect(), cs->disable_intr is NULL when privdata->hw_init() fails with non-zero. In this case, myrs_cleanup(cs) will call a NULL ptr and crash the kernel. [ 1.105606] myrs 0000:00:03.0: Unknown Initialization Error 5A [ 1.105872] myrs 0000:00:03.0: Failed to initialize Controller [ 1.106082] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.110774] Call Trace: [ 1.110950] myrs_cleanup+0xe4/0x150 [myrs] [ 1.111135] myrs_probe.cold+0x91/0x56a [myrs] [ 1.111302] ? DAC960_GEM_intr_handler+0x1f0/0x1f0 [myrs] [ 1.111500] local_pci_probe+0x48/0x90 |
| CVE-2022-48823 | In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Fix refcount issue when LOGO is received during TMF Hung task call trace was seen during LOGO processing. [ 974.309060] [0000:00:00.0]:[qedf_eh_device_reset:868]: 1:0:2:0: LUN RESET Issued... [ 974.309065] [0000:00:00.0]:[qedf_initiate_tmf:2422]: tm_flags 0x10 sc_cmd 00000000c16b930f op = 0x2a target_id = 0x2 lun=0 [ 974.309178] [0000:00:00.0]:[qedf_initiate_tmf:2431]: portid=016900 tm_flags =LUN RESET [ 974.309222] [0000:00:00.0]:[qedf_initiate_tmf:2438]: orig io_req = 00000000ec78df8f xid = 0x180 ref_cnt = 1. [ 974.309625] host1: rport 016900: Received LOGO request while in state Ready [ 974.309627] host1: rport 016900: Delete port [ 974.309642] host1: rport 016900: work event 3 [ 974.309644] host1: rport 016900: lld callback ev 3 [ 974.313243] [0000:61:00.2]:[qedf_execute_tmf:2383]:1: fcport is uploading, not executing flush. [ 974.313295] [0000:61:00.2]:[qedf_execute_tmf:2400]:1: task mgmt command success... [ 984.031088] INFO: task jbd2/dm-15-8:7645 blocked for more than 120 seconds. [ 984.031136] Not tainted 4.18.0-305.el8.x86_64 #1 [ 984.031166] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 984.031209] jbd2/dm-15-8 D 0 7645 2 0x80004080 [ 984.031212] Call Trace: [ 984.031222] __schedule+0x2c4/0x700 [ 984.031230] ? unfreeze_partials.isra.83+0x16e/0x1a0 [ 984.031233] ? bit_wait_timeout+0x90/0x90 [ 984.031235] schedule+0x38/0xa0 [ 984.031238] io_schedule+0x12/0x40 [ 984.031240] bit_wait_io+0xd/0x50 [ 984.031243] __wait_on_bit+0x6c/0x80 [ 984.031248] ? free_buffer_head+0x21/0x50 [ 984.031251] out_of_line_wait_on_bit+0x91/0xb0 [ 984.031257] ? init_wait_var_entry+0x50/0x50 [ 984.031268] jbd2_journal_commit_transaction+0x112e/0x19f0 [jbd2] [ 984.031280] kjournald2+0xbd/0x270 [jbd2] [ 984.031284] ? finish_wait+0x80/0x80 [ 984.031291] ? commit_timeout+0x10/0x10 [jbd2] [ 984.031294] kthread+0x116/0x130 [ 984.031300] ? kthread_flush_work_fn+0x10/0x10 [ 984.031305] ret_from_fork+0x1f/0x40 There was a ref count issue when LOGO is received during TMF. This leads to one of the I/Os hanging with the driver. Fix the ref count. |
| CVE-2022-48822 | In the Linux kernel, the following vulnerability has been resolved: usb: f_fs: Fix use-after-free for epfile Consider a case where ffs_func_eps_disable is called from ffs_func_disable as part of composition switch and at the same time ffs_epfile_release get called from userspace. ffs_epfile_release will free up the read buffer and call ffs_data_closed which in turn destroys ffs->epfiles and mark it as NULL. While this was happening the driver has already initialized the local epfile in ffs_func_eps_disable which is now freed and waiting to acquire the spinlock. Once spinlock is acquired the driver proceeds with the stale value of epfile and tries to free the already freed read buffer causing use-after-free. Following is the illustration of the race: CPU1 CPU2 ffs_func_eps_disable epfiles (local copy) ffs_epfile_release ffs_data_closed if (last file closed) ffs_data_reset ffs_data_clear ffs_epfiles_destroy spin_lock dereference epfiles Fix this races by taking epfiles local copy & assigning it under spinlock and if epfiles(local) is null then update it in ffs->epfiles then finally destroy it. Extending the scope further from the race, protecting the ep related structures, and concurrent accesses. |
| CVE-2022-48821 | In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: avoid double fput() on failed usercopy If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact, dma_buf_fd() called fd_install() before, i.e. "consumed" one reference, leaving us with none. Calling dma_buf_put() will therefore put a reference we no longer own, leading to a valid file descritor table entry for an already released 'file' object which is a straight use-after-free. Simply avoid calling dma_buf_put() and rely on the process exit code to do the necessary cleanup, if needed, i.e. if the file descriptor is still valid. |
| CVE-2022-48820 | In the Linux kernel, the following vulnerability has been resolved: phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable() This error path needs to decrement "usbphyc->n_pll_cons.counter" before returning. |
| CVE-2022-48819 | In the Linux kernel, the following vulnerability has been resolved: tcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case syzbot found that mixing sendpage() and sendmsg(MSG_ZEROCOPY) calls over the same TCP socket would again trigger the infamous warning in inet_sock_destruct() WARN_ON(sk_forward_alloc_get(sk)); While Talal took into account a mix of regular copied data and MSG_ZEROCOPY one in the same skb, the sendpage() path has been forgotten. We want the charging to happen for sendpage(), because pages could be coming from a pipe. What is missing is the downgrading of pure zerocopy status to make sure sk_forward_alloc will stay synced. Add tcp_downgrade_zcopy_pure() helper so that we can use it from the two callers. |
| CVE-2022-48818 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: don't use devres for mdiobus As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The mv88e6xxx is an MDIO device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the Marvell switch driver on shutdown. systemd-shutdown[1]: Powering off. mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down fsl-mc dpbp.9: Removing from iommu group 7 fsl-mc dpbp.8: Removing from iommu group 7 ------------[ cut here ]------------ kernel BUG at drivers/net/phy/mdio_bus.c:677! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00040-gdc05f73788e5 #15 pc : mdiobus_free+0x44/0x50 lr : devm_mdiobus_free+0x10/0x20 Call trace: mdiobus_free+0x44/0x50 devm_mdiobus_free+0x10/0x20 devres_release_all+0xa0/0x100 __device_release_driver+0x190/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x4c/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x94/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_device_remove+0x24/0x40 __fsl_mc_device_remove+0xc/0x20 device_for_each_child+0x58/0xa0 dprc_remove+0x90/0xb0 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_bus_remove+0x80/0x100 fsl_mc_bus_shutdown+0xc/0x1c platform_shutdown+0x20/0x30 device_shutdown+0x154/0x330 kernel_power_off+0x34/0x6c __do_sys_reboot+0x15c/0x250 __arm64_sys_reboot+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x4c/0x150 el0_svc+0x24/0xb0 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x178/0x17c So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The Marvell driver already has a good structure for mdiobus removal, so just plug in mdiobus_free and get rid of devres. |
| CVE-2022-48817 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: ar9331: register the mdiobus under devres As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The ar9331 is an MDIO device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the ar9331 switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The ar9331 driver doesn't have a complex code structure for mdiobus removal, so just replace of_mdiobus_register with the devres variant in order to be all-devres and ensure that we don't free a still-registered bus. |
| CVE-2022-48816 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: lock against ->sock changing during sysfs read ->sock can be set to NULL asynchronously unless ->recv_mutex is held. So it is important to hold that mutex. Otherwise a sysfs read can trigger an oops. Commit 17f09d3f619a ("SUNRPC: Check if the xprt is connected before handling sysfs reads") appears to attempt to fix this problem, but it only narrows the race window. |
| CVE-2022-48815 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: don't use devres for mdiobus As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Starfighter 2 is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the bcm_sf2 switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The bcm_sf2 driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. |
| CVE-2022-48814 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: seville: register the mdiobus under devres As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Seville VSC9959 switch is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the seville switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The seville driver has a code structure that could accommodate both the mdiobus_unregister and mdiobus_free calls, but it has an external dependency upon mscc_miim_setup() from mdio-mscc-miim.c, which calls devm_mdiobus_alloc_size() on its behalf. So rather than restructuring that, and exporting yet one more symbol mscc_miim_teardown(), let's work with devres and replace of_mdiobus_register with the devres variant. When we use all-devres, we can ensure that devres doesn't free a still-registered bus (it either runs both callbacks, or none). |
| CVE-2022-48813 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: don't use devres for mdiobus As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Felix VSC9959 switch is a PCI device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the felix switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The felix driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc_size() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. |
| CVE-2022-48812 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: don't use devres for mdiobus As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The GSWIP switch is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the GSWIP switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The gswip driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. |
| CVE-2022-48811 | In the Linux kernel, the following vulnerability has been resolved: ibmvnic: don't release napi in __ibmvnic_open() If __ibmvnic_open() encounters an error such as when setting link state, it calls release_resources() which frees the napi structures needlessly. Instead, have __ibmvnic_open() only clean up the work it did so far (i.e. disable napi and irqs) and leave the rest to the callers. If caller of __ibmvnic_open() is ibmvnic_open(), it should release the resources immediately. If the caller is do_reset() or do_hard_reset(), they will release the resources on the next reset. This fixes following crash that occurred when running the drmgr command several times to add/remove a vnic interface: [102056] ibmvnic 30000003 env3: Disabling rx_scrq[6] irq [102056] ibmvnic 30000003 env3: Disabling rx_scrq[7] irq [102056] ibmvnic 30000003 env3: Replenished 8 pools Kernel attempted to read user page (10) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000010 Faulting instruction address: 0xc000000000a3c840 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries ... CPU: 9 PID: 102056 Comm: kworker/9:2 Kdump: loaded Not tainted 5.16.0-rc5-autotest-g6441998e2e37 #1 Workqueue: events_long __ibmvnic_reset [ibmvnic] NIP: c000000000a3c840 LR: c0080000029b5378 CTR: c000000000a3c820 REGS: c0000000548e37e0 TRAP: 0300 Not tainted (5.16.0-rc5-autotest-g6441998e2e37) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28248484 XER: 00000004 CFAR: c0080000029bdd24 DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0 GPR00: c0080000029b55d0 c0000000548e3a80 c0000000028f0200 0000000000000000 ... NIP [c000000000a3c840] napi_enable+0x20/0xc0 LR [c0080000029b5378] __ibmvnic_open+0xf0/0x430 [ibmvnic] Call Trace: [c0000000548e3a80] [0000000000000006] 0x6 (unreliable) [c0000000548e3ab0] [c0080000029b55d0] __ibmvnic_open+0x348/0x430 [ibmvnic] [c0000000548e3b40] [c0080000029bcc28] __ibmvnic_reset+0x500/0xdf0 [ibmvnic] [c0000000548e3c60] [c000000000176228] process_one_work+0x288/0x570 [c0000000548e3d00] [c000000000176588] worker_thread+0x78/0x660 [c0000000548e3da0] [c0000000001822f0] kthread+0x1c0/0x1d0 [c0000000548e3e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 7d2948f8 792307e0 4e800020 60000000 3c4c01eb 384239e0 f821ffd1 39430010 38a0fff6 e92d1100 f9210028 39200000 <e9030010> f9010020 60420000 e9210020 ---[ end trace 5f8033b08fd27706 ]--- |
| CVE-2022-48810 | In the Linux kernel, the following vulnerability has been resolved: ipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path ip[6]mr_free_table() can only be called under RTNL lock. RTNL: assertion failed at net/core/dev.c (10367) WARNING: CPU: 1 PID: 5890 at net/core/dev.c:10367 unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367 Modules linked in: CPU: 1 PID: 5890 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller-11627-g422ee58dc0ef #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367 Code: 0f 85 9b ee ff ff e8 69 07 4b fa ba 7f 28 00 00 48 c7 c6 00 90 ae 8a 48 c7 c7 40 90 ae 8a c6 05 6d b1 51 06 01 e8 8c 90 d8 01 <0f> 0b e9 70 ee ff ff e8 3e 07 4b fa 4c 89 e7 e8 86 2a 59 fa e9 ee RSP: 0018:ffffc900046ff6e0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff888050f51d00 RSI: ffffffff815fa008 RDI: fffff520008dfece RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815f3d6e R11: 0000000000000000 R12: 00000000fffffff4 R13: dffffc0000000000 R14: ffffc900046ff750 R15: ffff88807b7dc000 FS: 00007f4ab736e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee0b4f8990 CR3: 000000001e7d2000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mroute_clean_tables+0x244/0xb40 net/ipv6/ip6mr.c:1509 ip6mr_free_table net/ipv6/ip6mr.c:389 [inline] ip6mr_rules_init net/ipv6/ip6mr.c:246 [inline] ip6mr_net_init net/ipv6/ip6mr.c:1306 [inline] ip6mr_net_init+0x3f0/0x4e0 net/ipv6/ip6mr.c:1298 ops_init+0xaf/0x470 net/core/net_namespace.c:140 setup_net+0x54f/0xbb0 net/core/net_namespace.c:331 copy_net_ns+0x318/0x760 net/core/net_namespace.c:475 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 copy_namespaces+0x391/0x450 kernel/nsproxy.c:178 copy_process+0x2e0c/0x7300 kernel/fork.c:2167 kernel_clone+0xe7/0xab0 kernel/fork.c:2555 __do_sys_clone+0xc8/0x110 kernel/fork.c:2672 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f4ab89f9059 Code: Unable to access opcode bytes at RIP 0x7f4ab89f902f. RSP: 002b:00007f4ab736e118 EFLAGS: 00000206 ORIG_RAX: 0000000000000038 RAX: ffffffffffffffda RBX: 00007f4ab8b0bf60 RCX: 00007f4ab89f9059 RDX: 0000000020000280 RSI: 0000000020000270 RDI: 0000000040200000 RBP: 00007f4ab8a5308d R08: 0000000020000300 R09: 0000000020000300 R10: 00000000200002c0 R11: 0000000000000206 R12: 0000000000000000 R13: 00007ffc3977cc1f R14: 00007f4ab736e300 R15: 0000000000022000 </TASK> |
| CVE-2022-48809 | In the Linux kernel, the following vulnerability has been resolved: net: fix a memleak when uncloning an skb dst and its metadata When uncloning an skb dst and its associated metadata, a new dst+metadata is allocated and later replaces the old one in the skb. This is helpful to have a non-shared dst+metadata attached to a specific skb. The issue is the uncloned dst+metadata is initialized with a refcount of 1, which is increased to 2 before attaching it to the skb. When tun_dst_unclone returns, the dst+metadata is only referenced from a single place (the skb) while its refcount is 2. Its refcount will never drop to 0 (when the skb is consumed), leading to a memory leak. Fix this by removing the call to dst_hold in tun_dst_unclone, as the dst+metadata refcount is already 1. |
| CVE-2022-48808 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix panic when DSA master device unbinds on shutdown Rafael reports that on a system with LX2160A and Marvell DSA switches, if a reboot occurs while the DSA master (dpaa2-eth) is up, the following panic can be seen: systemd-shutdown[1]: Rebooting. Unable to handle kernel paging request at virtual address 00a0000800000041 [00a0000800000041] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 6 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00042-g8f5585009b24 #32 pc : dsa_slave_netdevice_event+0x130/0x3e4 lr : raw_notifier_call_chain+0x50/0x6c Call trace: dsa_slave_netdevice_event+0x130/0x3e4 raw_notifier_call_chain+0x50/0x6c call_netdevice_notifiers_info+0x54/0xa0 __dev_close_many+0x50/0x130 dev_close_many+0x84/0x120 unregister_netdevice_many+0x130/0x710 unregister_netdevice_queue+0x8c/0xd0 unregister_netdev+0x20/0x30 dpaa2_eth_remove+0x68/0x190 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x94/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_device_remove+0x24/0x40 __fsl_mc_device_remove+0xc/0x20 device_for_each_child+0x58/0xa0 dprc_remove+0x90/0xb0 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_bus_remove+0x80/0x100 fsl_mc_bus_shutdown+0xc/0x1c platform_shutdown+0x20/0x30 device_shutdown+0x154/0x330 __do_sys_reboot+0x1cc/0x250 __arm64_sys_reboot+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x4c/0x150 el0_svc+0x24/0xb0 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x178/0x17c It can be seen from the stack trace that the problem is that the deregistration of the master causes a dev_close(), which gets notified as NETDEV_GOING_DOWN to dsa_slave_netdevice_event(). But dsa_switch_shutdown() has already run, and this has unregistered the DSA slave interfaces, and yet, the NETDEV_GOING_DOWN handler attempts to call dev_close_many() on those slave interfaces, leading to the problem. The previous attempt to avoid the NETDEV_GOING_DOWN on the master after dsa_switch_shutdown() was called seems improper. Unregistering the slave interfaces is unnecessary and unhelpful. Instead, after the slaves have stopped being uppers of the DSA master, we can now reset to NULL the master->dsa_ptr pointer, which will make DSA start ignoring all future notifier events on the master. |
| CVE-2022-48807 | In the Linux kernel, the following vulnerability has been resolved: ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler Currently, the same handler is called for both a NETDEV_BONDING_INFO LAG unlink notification as for a NETDEV_UNREGISTER call. This is causing a problem though, since the netdev_notifier_info passed has a different structure depending on which event is passed. The problem manifests as a call trace from a BUG: KASAN stack-out-of-bounds error. Fix this by creating a handler specific to NETDEV_UNREGISTER that only is passed valid elements in the netdev_notifier_info struct for the NETDEV_UNREGISTER event. Also included is the removal of an unbalanced dev_put on the peer_netdev and related braces. |
| CVE-2022-48806 | In the Linux kernel, the following vulnerability has been resolved: eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX Commit effa453168a7 ("i2c: i801: Don't silently correct invalid transfer size") revealed that ee1004_eeprom_read() did not properly limit how many bytes to read at once. In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the length to read as an u8. If count == 256 after taking into account the offset and page boundary, the cast to u8 overflows. And this is common when user space tries to read the entire EEPROM at once. To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows. |
| CVE-2022-48805 | In the Linux kernel, the following vulnerability has been resolved: net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup ax88179_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. I have tested that this can be used by a malicious USB device to send a bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response that contains random kernel heap data. It's probably also possible to get OOB writes from this on a little-endian system somehow - maybe by triggering skb_cow() via IP options processing -, but I haven't tested that. |
| CVE-2022-48804 | In the Linux kernel, the following vulnerability has been resolved: vt_ioctl: fix array_index_nospec in vt_setactivate array_index_nospec ensures that an out-of-bounds value is set to zero on the transient path. Decreasing the value by one afterwards causes a transient integer underflow. vsa.console should be decreased first and then sanitized with array_index_nospec. Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU Amsterdam. |
| CVE-2022-48803 | In the Linux kernel, the following vulnerability has been resolved: phy: ti: Fix missing sentinel for clk_div_table _get_table_maxdiv() tries to access "clk_div_table" array out of bound defined in phy-j721e-wiz.c. Add a sentinel entry to prevent the following global-out-of-bounds error reported by enabling KASAN. [ 9.552392] BUG: KASAN: global-out-of-bounds in _get_maxdiv+0xc0/0x148 [ 9.558948] Read of size 4 at addr ffff8000095b25a4 by task kworker/u4:1/38 [ 9.565926] [ 9.567441] CPU: 1 PID: 38 Comm: kworker/u4:1 Not tainted 5.16.0-116492-gdaadb3bd0e8d-dirty #360 [ 9.576242] Hardware name: Texas Instruments J721e EVM (DT) [ 9.581832] Workqueue: events_unbound deferred_probe_work_func [ 9.587708] Call trace: [ 9.590174] dump_backtrace+0x20c/0x218 [ 9.594038] show_stack+0x18/0x68 [ 9.597375] dump_stack_lvl+0x9c/0xd8 [ 9.601062] print_address_description.constprop.0+0x78/0x334 [ 9.606830] kasan_report+0x1f0/0x260 [ 9.610517] __asan_load4+0x9c/0xd8 [ 9.614030] _get_maxdiv+0xc0/0x148 [ 9.617540] divider_determine_rate+0x88/0x488 [ 9.622005] divider_round_rate_parent+0xc8/0x124 [ 9.626729] wiz_clk_div_round_rate+0x54/0x68 [ 9.631113] clk_core_determine_round_nolock+0x124/0x158 [ 9.636448] clk_core_round_rate_nolock+0x68/0x138 [ 9.641260] clk_core_set_rate_nolock+0x268/0x3a8 [ 9.645987] clk_set_rate+0x50/0xa8 [ 9.649499] cdns_sierra_phy_init+0x88/0x248 [ 9.653794] phy_init+0x98/0x108 [ 9.657046] cdns_pcie_enable_phy+0xa0/0x170 [ 9.661340] cdns_pcie_init_phy+0x250/0x2b0 [ 9.665546] j721e_pcie_probe+0x4b8/0x798 [ 9.669579] platform_probe+0x8c/0x108 [ 9.673350] really_probe+0x114/0x630 [ 9.677037] __driver_probe_device+0x18c/0x220 [ 9.681505] driver_probe_device+0xac/0x150 [ 9.685712] __device_attach_driver+0xec/0x170 [ 9.690178] bus_for_each_drv+0xf0/0x158 [ 9.694124] __device_attach+0x184/0x210 [ 9.698070] device_initial_probe+0x14/0x20 [ 9.702277] bus_probe_device+0xec/0x100 [ 9.706223] deferred_probe_work_func+0x124/0x180 [ 9.710951] process_one_work+0x4b0/0xbc0 [ 9.714983] worker_thread+0x74/0x5d0 [ 9.718668] kthread+0x214/0x230 [ 9.721919] ret_from_fork+0x10/0x20 [ 9.725520] [ 9.727032] The buggy address belongs to the variable: [ 9.732183] clk_div_table+0x24/0x440 |
| CVE-2022-48802 | In the Linux kernel, the following vulnerability has been resolved: fs/proc: task_mmu.c: don't read mapcount for migration entry The syzbot reported the below BUG: kernel BUG at include/linux/page-flags.h:785! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 4392 Comm: syz-executor560 Not tainted 5.16.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:PageDoubleMap include/linux/page-flags.h:785 [inline] RIP: 0010:__page_mapcount+0x2d2/0x350 mm/util.c:744 Call Trace: page_mapcount include/linux/mm.h:837 [inline] smaps_account+0x470/0xb10 fs/proc/task_mmu.c:466 smaps_pte_entry fs/proc/task_mmu.c:538 [inline] smaps_pte_range+0x611/0x1250 fs/proc/task_mmu.c:601 walk_pmd_range mm/pagewalk.c:128 [inline] walk_pud_range mm/pagewalk.c:205 [inline] walk_p4d_range mm/pagewalk.c:240 [inline] walk_pgd_range mm/pagewalk.c:277 [inline] __walk_page_range+0xe23/0x1ea0 mm/pagewalk.c:379 walk_page_vma+0x277/0x350 mm/pagewalk.c:530 smap_gather_stats.part.0+0x148/0x260 fs/proc/task_mmu.c:768 smap_gather_stats fs/proc/task_mmu.c:741 [inline] show_smap+0xc6/0x440 fs/proc/task_mmu.c:822 seq_read_iter+0xbb0/0x1240 fs/seq_file.c:272 seq_read+0x3e0/0x5b0 fs/seq_file.c:162 vfs_read+0x1b5/0x600 fs/read_write.c:479 ksys_read+0x12d/0x250 fs/read_write.c:619 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The reproducer was trying to read /proc/$PID/smaps when calling MADV_FREE at the mean time. MADV_FREE may split THPs if it is called for partial THP. It may trigger the below race: CPU A CPU B ----- ----- smaps walk: MADV_FREE: page_mapcount() PageCompound() split_huge_page() page = compound_head(page) PageDoubleMap(page) When calling PageDoubleMap() this page is not a tail page of THP anymore so the BUG is triggered. This could be fixed by elevated refcount of the page before calling mapcount, but that would prevent it from counting migration entries, and it seems overkilling because the race just could happen when PMD is split so all PTE entries of tail pages are actually migration entries, and smaps_account() does treat migration entries as mapcount == 1 as Kirill pointed out. Add a new parameter for smaps_account() to tell this entry is migration entry then skip calling page_mapcount(). Don't skip getting mapcount for device private entries since they do track references with mapcount. Pagemap also has the similar issue although it was not reported. Fixed it as well. [[email protected]: v4] Link: https://lkml.kernel.org/r/[email protected] [[email protected]: avoid unused variable warning in pagemap_pmd_range()] Link: https://lkml.kernel.org/r/[email protected] |
| CVE-2022-48801 | In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL If we fail to copy the just created file descriptor to userland, we try to clean up by putting back 'fd' and freeing 'ib'. The code uses put_unused_fd() for the former which is wrong, as the file descriptor was already published by fd_install() which gets called internally by anon_inode_getfd(). This makes the error handling code leaving a half cleaned up file descriptor table around and a partially destructed 'file' object, allowing userland to play use-after-free tricks on us, by abusing the still usable fd and making the code operate on a dangling 'file->private_data' pointer. Instead of leaving the kernel in a partially corrupted state, don't attempt to explicitly clean up and leave this to the process exit path that'll release any still valid fds, including the one created by the previous call to anon_inode_getfd(). Simply return -EFAULT to indicate the error. |
| CVE-2022-48800 | In the Linux kernel, the following vulnerability has been resolved: mm: vmscan: remove deadlock due to throttling failing to make progress A soft lockup bug in kcompactd was reported in a private bugzilla with the following visible in dmesg; watchdog: BUG: soft lockup - CPU#33 stuck for 26s! [kcompactd0:479] watchdog: BUG: soft lockup - CPU#33 stuck for 52s! [kcompactd0:479] watchdog: BUG: soft lockup - CPU#33 stuck for 78s! [kcompactd0:479] watchdog: BUG: soft lockup - CPU#33 stuck for 104s! [kcompactd0:479] The machine had 256G of RAM with no swap and an earlier failed allocation indicated that node 0 where kcompactd was run was potentially unreclaimable; Node 0 active_anon:29355112kB inactive_anon:2913528kB active_file:0kB inactive_file:0kB unevictable:64kB isolated(anon):0kB isolated(file):0kB mapped:8kB dirty:0kB writeback:0kB shmem:26780kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 23480320kB writeback_tmp:0kB kernel_stack:2272kB pagetables:24500kB all_unreclaimable? yes Vlastimil Babka investigated a crash dump and found that a task migrating pages was trying to drain PCP lists; PID: 52922 TASK: ffff969f820e5000 CPU: 19 COMMAND: "kworker/u128:3" Call Trace: __schedule schedule schedule_timeout wait_for_completion __flush_work __drain_all_pages __alloc_pages_slowpath.constprop.114 __alloc_pages alloc_migration_target migrate_pages migrate_to_node do_migrate_pages cpuset_migrate_mm_workfn process_one_work worker_thread kthread ret_from_fork This failure is specific to CONFIG_PREEMPT=n builds. The root of the problem is that kcompact0 is not rescheduling on a CPU while a task that has isolated a large number of the pages from the LRU is waiting on kcompact0 to reschedule so the pages can be released. While shrink_inactive_list() only loops once around too_many_isolated, reclaim can continue without rescheduling if sc->skipped_deactivate == 1 which could happen if there was no file LRU and the inactive anon list was not low. |
| CVE-2022-48799 | In the Linux kernel, the following vulnerability has been resolved: perf: Fix list corruption in perf_cgroup_switch() There's list corruption on cgrp_cpuctx_list. This happens on the following path: perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list) cpu_ctx_sched_in ctx_sched_in ctx_pinned_sched_in merge_sched_in perf_cgroup_event_disable: remove the event from the list Use list_for_each_entry_safe() to allow removing an entry during iteration. |
| CVE-2022-48798 | In the Linux kernel, the following vulnerability has been resolved: s390/cio: verify the driver availability for path_event call If no driver is attached to a device or the driver does not provide the path_event function, an FCES path-event on this device could end up in a kernel-panic. Verify the driver availability before the path_event function call. |
| CVE-2022-48797 | In the Linux kernel, the following vulnerability has been resolved: mm: don't try to NUMA-migrate COW pages that have other uses Oded Gabbay reports that enabling NUMA balancing causes corruption with his Gaudi accelerator test load: "All the details are in the bug, but the bottom line is that somehow, this patch causes corruption when the numa balancing feature is enabled AND we don't use process affinity AND we use GUP to pin pages so our accelerator can DMA to/from system memory. Either disabling numa balancing, using process affinity to bind to specific numa-node or reverting this patch causes the bug to disappear" and Oded bisected the issue to commit 09854ba94c6a ("mm: do_wp_page() simplification"). Now, the NUMA balancing shouldn't actually be changing the writability of a page, and as such shouldn't matter for COW. But it appears it does. Suspicious. However, regardless of that, the condition for enabling NUMA faults in change_pte_range() is nonsensical. It uses "page_mapcount(page)" to decide if a COW page should be NUMA-protected or not, and that makes absolutely no sense. The number of mappings a page has is irrelevant: not only does GUP get a reference to a page as in Oded's case, but the other mappings migth be paged out and the only reference to them would be in the page count. Since we should never try to NUMA-balance a page that we can't move anyway due to other references, just fix the code to use 'page_count()'. Oded confirms that that fixes his issue. Now, this does imply that something in NUMA balancing ends up changing page protections (other than the obvious one of making the page inaccessible to get the NUMA faulting information). Otherwise the COW simplification wouldn't matter - since doing the GUP on the page would make sure it's writable. The cause of that permission change would be good to figure out too, since it clearly results in spurious COW events - but fixing the nonsensical test that just happened to work before is obviously the CorrectThing(tm) to do regardless. |
| CVE-2022-48796 | In the Linux kernel, the following vulnerability has been resolved: iommu: Fix potential use-after-free during probe Kasan has reported the following use after free on dev->iommu. when a device probe fails and it is in process of freeing dev->iommu in dev_iommu_free function, a deferred_probe_work_func runs in parallel and tries to access dev->iommu->fwspec in of_iommu_configure path thus causing use after free. BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4 Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x33c show_stack+0x18/0x24 dump_stack_lvl+0x16c/0x1e0 print_address_description+0x84/0x39c __kasan_report+0x184/0x308 kasan_report+0x50/0x78 __asan_load8+0xc0/0xc4 of_iommu_configure+0xb4/0x4a4 of_dma_configure_id+0x2fc/0x4d4 platform_dma_configure+0x40/0x5c really_probe+0x1b4/0xb74 driver_probe_device+0x11c/0x228 __device_attach_driver+0x14c/0x304 bus_for_each_drv+0x124/0x1b0 __device_attach+0x25c/0x334 device_initial_probe+0x24/0x34 bus_probe_device+0x78/0x134 deferred_probe_work_func+0x130/0x1a8 process_one_work+0x4c8/0x970 worker_thread+0x5c8/0xaec kthread+0x1f8/0x220 ret_from_fork+0x10/0x18 Allocated by task 1: ____kasan_kmalloc+0xd4/0x114 __kasan_kmalloc+0x10/0x1c kmem_cache_alloc_trace+0xe4/0x3d4 __iommu_probe_device+0x90/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Freed by task 1: kasan_set_track+0x4c/0x84 kasan_set_free_info+0x28/0x4c ____kasan_slab_free+0x120/0x15c __kasan_slab_free+0x18/0x28 slab_free_freelist_hook+0x204/0x2fc kfree+0xfc/0x3a4 __iommu_probe_device+0x284/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Fix this by setting dev->iommu to NULL first and then freeing dev_iommu structure in dev_iommu_free function. |
| CVE-2022-48795 | In the Linux kernel, the following vulnerability has been resolved: parisc: Fix data TLB miss in sba_unmap_sg Rolf Eike Beer reported the following bug: [1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018 [1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4 [1274934.746891] Hardware name: 9000/785/C8000 [1274934.746891] [1274934.746891] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [1274934.746891] PSW: 00001000000001001111111000001110 Not tainted [1274934.746891] r00-03 000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000 [1274934.746891] r04-07 0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001 [1274934.746891] r08-11 0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001 [1274934.746891] r12-15 0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0 [1274934.746891] r16-19 0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007 [1274934.746891] r20-23 0000000000000006 000000004a368950 0000000000000000 0000000000000001 [1274934.746891] r24-27 0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0 [1274934.746891] r28-31 0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118 [1274934.746891] sr00-03 00000000066e5800 0000000000000000 0000000000000000 00000000066e5800 [1274934.746891] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [1274934.746891] [1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec [1274934.746891] IIR: 48780030 ISR: 0000000000000000 IOR: 0000004140000018 [1274934.746891] CPU: 3 CR30: 00000040e3a9c000 CR31: ffffffffffffffff [1274934.746891] ORIG_R28: 0000000040acdd58 [1274934.746891] IAOQ[0]: sba_unmap_sg+0xb0/0x118 [1274934.746891] IAOQ[1]: sba_unmap_sg+0xb4/0x118 [1274934.746891] RP(r2): sba_unmap_sg+0xac/0x118 [1274934.746891] Backtrace: [1274934.746891] [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70 [1274934.746891] [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60 [1274934.746891] [<00000000407a3488>] mptscsih_io_done+0x150/0xd70 [1274934.746891] [<0000000040798600>] mpt_interrupt+0x168/0xa68 [1274934.746891] [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278 [1274934.746891] [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8 [1274934.746891] [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0 [1274934.746891] [<00000000402548e0>] generic_handle_irq+0x50/0x70 [1274934.746891] [<000000004019a254>] call_on_stack+0x18/0x24 [1274934.746891] [1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?) The bug is caused by overrunning the sglist and incorrectly testing sg_dma_len(sglist) before nents. Normally this doesn't cause a crash, but in this case sglist crossed a page boundary. This occurs in the following code: while (sg_dma_len(sglist) && nents--) { The fix is simply to test nents first and move the decrement of nents into the loop. |
| CVE-2022-48794 | In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: at86rf230: Stop leaking skb's Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. In the Tx case we then leak the skb structure. Free the skb structure upon error before returning when appropriate. As the 'is_tx = 0' cannot be moved in the complete handler because of a possible race between the delay in switching to STATE_RX_AACK_ON and a new interrupt, we introduce an intermediate 'was_tx' boolean just for this purpose. There is no Fixes tag applying here, many changes have been made on this area and the issue kind of always existed. |
| CVE-2022-48793 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: nSVM: fix potential NULL derefernce on nested migration Turns out that due to review feedback and/or rebases I accidentally moved the call to nested_svm_load_cr3 to be too early, before the NPT is enabled, which is very wrong to do. KVM can't even access guest memory at that point as nested NPT is needed for that, and of course it won't initialize the walk_mmu, which is main issue the patch was addressing. Fix this for real. |
| CVE-2022-48792 | In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free for aborted SSP/STP sas_task Currently a use-after-free may occur if a sas_task is aborted by the upper layer before we handle the I/O completion in mpi_ssp_completion() or mpi_sata_completion(). In this case, the following are the two steps in handling those I/O completions: - Call complete() to inform the upper layer handler of completion of the I/O. - Release driver resources associated with the sas_task in pm8001_ccb_task_free() call. When complete() is called, the upper layer may free the sas_task. As such, we should not touch the associated sas_task afterwards, but we do so in the pm8001_ccb_task_free() call. Fix by swapping the complete() and pm8001_ccb_task_free() calls ordering. |
| CVE-2022-48791 | In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free for aborted TMF sas_task Currently a use-after-free may occur if a TMF sas_task is aborted before we handle the IO completion in mpi_ssp_completion(). The abort occurs due to timeout. When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the sas_task is freed in pm8001_exec_internal_tmf_task(). However, if the I/O completion occurs later, the I/O completion still thinks that the sas_task is available. Fix this by clearing the ccb->task if the TMF times out - the I/O completion handler does nothing if this pointer is cleared. |
| CVE-2022-48790 | In the Linux kernel, the following vulnerability has been resolved: nvme: fix a possible use-after-free in controller reset during load Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl readiness for AER submission. This may lead to a use-after-free condition that was observed with nvme-tcp. The race condition may happen in the following scenario: 1. driver executes its reset_ctrl_work 2. -> nvme_stop_ctrl - flushes ctrl async_event_work 3. ctrl sends AEN which is received by the host, which in turn schedules AEN handling 4. teardown admin queue (which releases the queue socket) 5. AEN processed, submits another AER, calling the driver to submit 6. driver attempts to send the cmd ==> use-after-free In order to fix that, add ctrl state check to validate the ctrl is actually able to accept the AER submission. This addresses the above race in controller resets because the driver during teardown should: 1. change ctrl state to RESETTING 2. flush async_event_work (as well as other async work elements) So after 1,2, any other AER command will find the ctrl state to be RESETTING and bail out without submitting the AER. |
| CVE-2022-48789 | In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix possible use-after-free in transport error_recovery work While nvme_tcp_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. |
| CVE-2022-48788 | In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix possible use-after-free in transport error_recovery work While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. |
| CVE-2022-48787 | In the Linux kernel, the following vulnerability has been resolved: iwlwifi: fix use-after-free If no firmware was present at all (or, presumably, all of the firmware files failed to parse), we end up unbinding by calling device_release_driver(), which calls remove(), which then in iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However the new code I added will still erroneously access it after it was freed. Set 'failure=false' in this case to avoid the access, all data was already freed anyway. |
| CVE-2022-48786 | In the Linux kernel, the following vulnerability has been resolved: vsock: remove vsock from connected table when connect is interrupted by a signal vsock_connect() expects that the socket could already be in the TCP_ESTABLISHED state when the connecting task wakes up with a signal pending. If this happens the socket will be in the connected table, and it is not removed when the socket state is reset. In this situation it's common for the process to retry connect(), and if the connection is successful the socket will be added to the connected table a second time, corrupting the list. Prevent this by calling vsock_remove_connected() if a signal is received while waiting for a connection. This is harmless if the socket is not in the connected table, and if it is in the table then removing it will prevent list corruption from a double add. Note for backporting: this patch requires d5afa82c977e ("vsock: correct removal of socket from the list"), which is in all current stable trees except 4.9.y. |
| CVE-2022-48785 | In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use rcu-safe version of ipv6_get_lladdr() Some time ago 8965779d2c0e ("ipv6,mcast: always hold idev->lock before mca_lock") switched ipv6_get_lladdr() to __ipv6_get_lladdr(), which is rcu-unsafe version. That was OK, because idev->lock was held for these codepaths. In 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") these external locks were removed, so we probably need to restore the original rcu-safe call. Otherwise, we occasionally get a machine crashed/stalled with the following in dmesg: [ 3405.966610][T230589] general protection fault, probably for non-canonical address 0xdead00000000008c: 0000 [#1] SMP NOPTI [ 3405.982083][T230589] CPU: 44 PID: 230589 Comm: kworker/44:3 Tainted: G O 5.15.19-cloudflare-2022.2.1 #1 [ 3405.998061][T230589] Hardware name: SUPA-COOL-SERV [ 3406.009552][T230589] Workqueue: mld mld_ifc_work [ 3406.017224][T230589] RIP: 0010:__ipv6_get_lladdr+0x34/0x60 [ 3406.025780][T230589] Code: 57 10 48 83 c7 08 48 89 e5 48 39 d7 74 3e 48 8d 82 38 ff ff ff eb 13 48 8b 90 d0 00 00 00 48 8d 82 38 ff ff ff 48 39 d7 74 22 <66> 83 78 32 20 77 1b 75 e4 89 ca 23 50 2c 75 dd 48 8b 50 08 48 8b [ 3406.055748][T230589] RSP: 0018:ffff94e4b3fc3d10 EFLAGS: 00010202 [ 3406.065617][T230589] RAX: dead00000000005a RBX: ffff94e4b3fc3d30 RCX: 0000000000000040 [ 3406.077477][T230589] RDX: dead000000000122 RSI: ffff94e4b3fc3d30 RDI: ffff8c3a31431008 [ 3406.089389][T230589] RBP: ffff94e4b3fc3d10 R08: 0000000000000000 R09: 0000000000000000 [ 3406.101445][T230589] R10: ffff8c3a31430000 R11: 000000000000000b R12: ffff8c2c37887100 [ 3406.113553][T230589] R13: ffff8c3a39537000 R14: 00000000000005dc R15: ffff8c3a31431000 [ 3406.125730][T230589] FS: 0000000000000000(0000) GS:ffff8c3b9fc80000(0000) knlGS:0000000000000000 [ 3406.138992][T230589] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3406.149895][T230589] CR2: 00007f0dfea1db60 CR3: 000000387b5f2000 CR4: 0000000000350ee0 [ 3406.162421][T230589] Call Trace: [ 3406.170235][T230589] <TASK> [ 3406.177736][T230589] mld_newpack+0xfe/0x1a0 [ 3406.186686][T230589] add_grhead+0x87/0xa0 [ 3406.195498][T230589] add_grec+0x485/0x4e0 [ 3406.204310][T230589] ? newidle_balance+0x126/0x3f0 [ 3406.214024][T230589] mld_ifc_work+0x15d/0x450 [ 3406.223279][T230589] process_one_work+0x1e6/0x380 [ 3406.232982][T230589] worker_thread+0x50/0x3a0 [ 3406.242371][T230589] ? rescuer_thread+0x360/0x360 [ 3406.252175][T230589] kthread+0x127/0x150 [ 3406.261197][T230589] ? set_kthread_struct+0x40/0x40 [ 3406.271287][T230589] ret_from_fork+0x22/0x30 [ 3406.280812][T230589] </TASK> [ 3406.288937][T230589] Modules linked in: ... [last unloaded: kheaders] [ 3406.476714][T230589] ---[ end trace 3525a7655f2f3b9e ]--- |
| CVE-2022-48784 | In the Linux kernel, the following vulnerability has been resolved: cfg80211: fix race in netlink owner interface destruction My previous fix here to fix the deadlock left a race where the exact same deadlock (see the original commit referenced below) can still happen if cfg80211_destroy_ifaces() already runs while nl80211_netlink_notify() is still marking some interfaces as nl_owner_dead. The race happens because we have two loops here - first we dev_close() all the netdevs, and then we destroy them. If we also have two netdevs (first one need only be a wdev though) then we can find one during the first iteration, close it, and go to the second iteration -- but then find two, and try to destroy also the one we didn't close yet. Fix this by only iterating once. |
| CVE-2022-48783 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: fix use after free in gswip_remove() of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be done before mdiobus_free(priv->ds->slave_mii_bus). |
| CVE-2022-48782 | In the Linux kernel, the following vulnerability has been resolved: mctp: fix use after free Clang static analysis reports this problem route.c:425:4: warning: Use of memory after it is freed trace_mctp_key_acquire(key); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ When mctp_key_add() fails, key is freed but then is later used in trace_mctp_key_acquire(). Add an else statement to use the key only when mctp_key_add() is successful. |
| CVE-2022-48781 | In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - get rid of alg_memory_allocated alg_memory_allocated does not seem to be really used. alg_proto does have a .memory_allocated field, but no corresponding .sysctl_mem. This means sk_has_account() returns true, but all sk_prot_mem_limits() users will trigger a NULL dereference [1]. THis was not a problem until SO_RESERVE_MEM addition. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 3591 Comm: syz-executor153 Not tainted 5.17.0-rc3-syzkaller-00316-gb81b1829e7e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline] RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000 Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48 RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120 RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025 R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840 R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001 FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sock_setsockopt+0x14a9/0x3a30 net/core/sock.c:1446 __sys_setsockopt+0x5af/0x980 net/socket.c:2176 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xb1/0xc0 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc7440fddc9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe98f07968 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc7440fddc9 RDX: 0000000000000049 RSI: 0000000000000001 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000004 R09: 00007ffe98f07990 R10: 0000000020000000 R11: 0000000000000246 R12: 00007ffe98f0798c R13: 00007ffe98f079a0 R14: 00007ffe98f079e0 R15: 0000000000000000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline] RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000 Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48 RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120 RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025 R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840 R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001 FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 |
| CVE-2022-48780 | In the Linux kernel, the following vulnerability has been resolved: net/smc: Avoid overwriting the copies of clcsock callback functions The callback functions of clcsock will be saved and replaced during the fallback. But if the fallback happens more than once, then the copies of these callback functions will be overwritten incorrectly, resulting in a loop call issue: clcsk->sk_error_report |- smc_fback_error_report() <------------------------------| |- smc_fback_forward_wakeup() | (loop) |- clcsock_callback() (incorrectly overwritten) | |- smc->clcsk_error_report() ------------------| So this patch fixes the issue by saving these function pointers only once in the fallback and avoiding overwriting. |
| CVE-2022-48779 | In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: fix use-after-free in ocelot_vlan_del() ocelot_vlan_member_del() will free the struct ocelot_bridge_vlan, so if this is the same as the port's pvid_vlan which we access afterwards, what we're accessing is freed memory. Fix the bug by determining whether to clear ocelot_port->pvid_vlan prior to calling ocelot_vlan_member_del(). |
| CVE-2022-48778 | In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: gpmi: don't leak PM reference in error path If gpmi_nfc_apply_timings() fails, the PM runtime usage counter must be dropped. |
| CVE-2022-48777 | In the Linux kernel, the following vulnerability has been resolved: mtd: parsers: qcom: Fix kernel panic on skipped partition In the event of a skipped partition (case when the entry name is empty) the kernel panics in the cleanup function as the name entry is NULL. Rework the parser logic by first checking the real partition number and then allocate the space and set the data for the valid partitions. The logic was also fundamentally wrong as with a skipped partition, the parts number returned was incorrect by not decreasing it for the skipped partitions. |
| CVE-2022-48776 | In the Linux kernel, the following vulnerability has been resolved: mtd: parsers: qcom: Fix missing free for pparts in cleanup Mtdpart doesn't free pparts when a cleanup function is declared. Add missing free for pparts in cleanup function for smem to fix the leak. |
| CVE-2022-48775 | In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()： If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put(). |
| CVE-2022-48774 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: ptdma: Fix the error handling path in pt_core_init() In order to free resources correctly in the error handling path of pt_core_init(), 2 goto's have to be switched. Otherwise, some resources will leak and we will try to release things that have not been allocated yet. Also move a dev_err() to a place where it is more meaningful. |
| CVE-2022-48773 | In the Linux kernel, the following vulnerability has been resolved: xprtrdma: fix pointer derefs in error cases of rpcrdma_ep_create If there are failures then we must not leave the non-NULL pointers with the error value, otherwise `rpcrdma_ep_destroy` gets confused and tries free them, resulting in an Oops. |
| CVE-2022-48772 | In the Linux kernel, the following vulnerability has been resolved: media: lgdt3306a: Add a check against null-pointer-def The driver should check whether the client provides the platform_data. The following log reveals it: [ 29.610324] BUG: KASAN: null-ptr-deref in kmemdup+0x30/0x40 [ 29.610730] Read of size 40 at addr 0000000000000000 by task bash/414 [ 29.612820] Call Trace: [ 29.613030] <TASK> [ 29.613201] dump_stack_lvl+0x56/0x6f [ 29.613496] ? kmemdup+0x30/0x40 [ 29.613754] print_report.cold+0x494/0x6b7 [ 29.614082] ? kmemdup+0x30/0x40 [ 29.614340] kasan_report+0x8a/0x190 [ 29.614628] ? kmemdup+0x30/0x40 [ 29.614888] kasan_check_range+0x14d/0x1d0 [ 29.615213] memcpy+0x20/0x60 [ 29.615454] kmemdup+0x30/0x40 [ 29.615700] lgdt3306a_probe+0x52/0x310 [ 29.616339] i2c_device_probe+0x951/0xa90 |
| CVE-2022-48771 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix stale file descriptors on failed usercopy A failing usercopy of the fence_rep object will lead to a stale entry in the file descriptor table as put_unused_fd() won't release it. This enables userland to refer to a dangling 'file' object through that still valid file descriptor, leading to all kinds of use-after-free exploitation scenarios. Fix this by deferring the call to fd_install() until after the usercopy has succeeded. |
| CVE-2022-48770 | In the Linux kernel, the following vulnerability has been resolved: bpf: Guard against accessing NULL pt_regs in bpf_get_task_stack() task_pt_regs() can return NULL on powerpc for kernel threads. This is then used in __bpf_get_stack() to check for user mode, resulting in a kernel oops. Guard against this by checking return value of task_pt_regs() before trying to obtain the call chain. |
| CVE-2022-48769 | In the Linux kernel, the following vulnerability has been resolved: efi: runtime: avoid EFIv2 runtime services on Apple x86 machines Aditya reports [0] that his recent MacbookPro crashes in the firmware when using the variable services at runtime. The culprit appears to be a call to QueryVariableInfo(), which we did not use to call on Apple x86 machines in the past as they only upgraded from EFI v1.10 to EFI v2.40 firmware fairly recently, and QueryVariableInfo() (along with UpdateCapsule() et al) was added in EFI v2.00. The only runtime service introduced in EFI v2.00 that we actually use in Linux is QueryVariableInfo(), as the capsule based ones are optional, generally not used at runtime (all the LVFS/fwupd firmware update infrastructure uses helper EFI programs that invoke capsule update at boot time, not runtime), and not implemented by Apple machines in the first place. QueryVariableInfo() is used to 'safely' set variables, i.e., only when there is enough space. This prevents machines with buggy firmwares from corrupting their NVRAMs when they run out of space. Given that Apple machines have been using EFI v1.10 services only for the longest time (the EFI v2.0 spec was released in 2006, and Linux support for the newly introduced runtime services was added in 2011, but the MacbookPro12,1 released in 2015 still claims to be EFI v1.10 only), let's avoid the EFI v2.0 ones on all Apple x86 machines. [0] https://lore.kernel.org/all/[email protected]/ |
| CVE-2022-48768 | In the Linux kernel, the following vulnerability has been resolved: tracing/histogram: Fix a potential memory leak for kstrdup() kfree() is missing on an error path to free the memory allocated by kstrdup(): p = param = kstrdup(data->params[i], GFP_KERNEL); So it is better to free it via kfree(p). |
| CVE-2022-48767 | In the Linux kernel, the following vulnerability has been resolved: ceph: properly put ceph_string reference after async create attempt The reference acquired by try_prep_async_create is currently leaked. Ensure we put it. |
| CVE-2022-48766 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wrap dcn301_calculate_wm_and_dlg for FPU. Mirrors the logic for dcn30. Cue lots of WARNs and some kernel panics without this fix. |
| CVE-2022-48765 | In the Linux kernel, the following vulnerability has been resolved: KVM: LAPIC: Also cancel preemption timer during SET_LAPIC The below warning is splatting during guest reboot. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1931 at arch/x86/kvm/x86.c:10322 kvm_arch_vcpu_ioctl_run+0x874/0x880 [kvm] CPU: 0 PID: 1931 Comm: qemu-system-x86 Tainted: G I 5.17.0-rc1+ #5 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x874/0x880 [kvm] Call Trace: <TASK> kvm_vcpu_ioctl+0x279/0x710 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd39797350b This can be triggered by not exposing tsc-deadline mode and doing a reboot in the guest. The lapic_shutdown() function which is called in sys_reboot path will not disarm the flying timer, it just masks LVTT. lapic_shutdown() clears APIC state w/ LVT_MASKED and timer-mode bit is 0, this can trigger timer-mode switch between tsc-deadline and oneshot/periodic, which can result in preemption timer be cancelled in apic_update_lvtt(). However, We can't depend on this when not exposing tsc-deadline mode and oneshot/periodic modes emulated by preemption timer. Qemu will synchronise states around reset, let's cancel preemption timer under KVM_SET_LAPIC. |
| CVE-2022-48764 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2} Free the "struct kvm_cpuid_entry2" array on successful post-KVM_RUN KVM_SET_CPUID{,2} to fix a memory leak, the callers of kvm_set_cpuid() free the array only on failure. BUG: memory leak unreferenced object 0xffff88810963a800 (size 2048): comm "syz-executor025", pid 3610, jiffies 4294944928 (age 8.080s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 0d 00 00 00 ................ 47 65 6e 75 6e 74 65 6c 69 6e 65 49 00 00 00 00 GenuntelineI.... backtrace: [<ffffffff814948ee>] kmalloc_node include/linux/slab.h:604 [inline] [<ffffffff814948ee>] kvmalloc_node+0x3e/0x100 mm/util.c:580 [<ffffffff814950f2>] kvmalloc include/linux/slab.h:732 [inline] [<ffffffff814950f2>] vmemdup_user+0x22/0x100 mm/util.c:199 [<ffffffff8109f5ff>] kvm_vcpu_ioctl_set_cpuid2+0x8f/0xf0 arch/x86/kvm/cpuid.c:423 [<ffffffff810711b9>] kvm_arch_vcpu_ioctl+0xb99/0x1e60 arch/x86/kvm/x86.c:5251 [<ffffffff8103e92d>] kvm_vcpu_ioctl+0x4ad/0x950 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4066 [<ffffffff815afacc>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff815afacc>] __do_sys_ioctl fs/ioctl.c:874 [inline] [<ffffffff815afacc>] __se_sys_ioctl fs/ioctl.c:860 [inline] [<ffffffff815afacc>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 [<ffffffff844a3335>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff844a3335>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2022-48763 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Forcibly leave nested virt when SMM state is toggled Forcibly leave nested virtualization operation if userspace toggles SMM state via KVM_SET_VCPU_EVENTS or KVM_SYNC_X86_EVENTS. If userspace forces the vCPU out of SMM while it's post-VMXON and then injects an SMI, vmx_enter_smm() will overwrite vmx->nested.smm.vmxon and end up with both vmxon=false and smm.vmxon=false, but all other nVMX state allocated. Don't attempt to gracefully handle the transition as (a) most transitions are nonsencial, e.g. forcing SMM while L2 is running, (b) there isn't sufficient information to handle all transitions, e.g. SVM wants access to the SMRAM save state, and (c) KVM_SET_VCPU_EVENTS must precede KVM_SET_NESTED_STATE during state restore as the latter disallows putting the vCPU into L2 if SMM is active, and disallows tagging the vCPU as being post-VMXON in SMM if SMM is not active. Abuse of KVM_SET_VCPU_EVENTS manifests as a WARN and memory leak in nVMX due to failure to free vmcs01's shadow VMCS, but the bug goes far beyond just a memory leak, e.g. toggling SMM on while L2 is active puts the vCPU in an architecturally impossible state. WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline] WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656 Modules linked in: CPU: 1 PID: 3606 Comm: syz-executor725 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline] RIP: 0010:free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656 Code: <0f> 0b eb b3 e8 8f 4d 9f 00 e9 f7 fe ff ff 48 89 df e8 92 4d 9f 00 Call Trace: <TASK> kvm_arch_vcpu_destroy+0x72/0x2f0 arch/x86/kvm/x86.c:11123 kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline] kvm_destroy_vcpus+0x11f/0x290 arch/x86/kvm/../../../virt/kvm/kvm_main.c:460 kvm_free_vcpus arch/x86/kvm/x86.c:11564 [inline] kvm_arch_destroy_vm+0x2e8/0x470 arch/x86/kvm/x86.c:11676 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1217 [inline] kvm_put_kvm+0x4fa/0xb00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1250 kvm_vm_release+0x3f/0x50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1273 __fput+0x286/0x9f0 fs/file_table.c:311 task_work_run+0xdd/0x1a0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0xb29/0x2a30 kernel/exit.c:806 do_group_exit+0xd2/0x2f0 kernel/exit.c:935 get_signal+0x4b0/0x28c0 kernel/signal.c:2862 arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> |
| CVE-2022-48762 | In the Linux kernel, the following vulnerability has been resolved: arm64: extable: fix load_unaligned_zeropad() reg indices In ex_handler_load_unaligned_zeropad() we erroneously extract the data and addr register indices from ex->type rather than ex->data. As ex->type will contain EX_TYPE_LOAD_UNALIGNED_ZEROPAD (i.e. 4): * We'll always treat X0 as the address register, since EX_DATA_REG_ADDR is extracted from bits [9:5]. Thus, we may attempt to dereference an arbitrary address as X0 may hold an arbitrary value. * We'll always treat X4 as the data register, since EX_DATA_REG_DATA is extracted from bits [4:0]. Thus we will corrupt X4 and cause arbitrary behaviour within load_unaligned_zeropad() and its caller. Fix this by extracting both values from ex->data as originally intended. On an MTE-enabled QEMU image we are hitting the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: fixup_exception+0xc4/0x108 __do_kernel_fault+0x3c/0x268 do_tag_check_fault+0x3c/0x104 do_mem_abort+0x44/0xf4 el1_abort+0x40/0x64 el1h_64_sync_handler+0x60/0xa0 el1h_64_sync+0x7c/0x80 link_path_walk+0x150/0x344 path_openat+0xa0/0x7dc do_filp_open+0xb8/0x168 do_sys_openat2+0x88/0x17c __arm64_sys_openat+0x74/0xa0 invoke_syscall+0x48/0x148 el0_svc_common+0xb8/0xf8 do_el0_svc+0x28/0x88 el0_svc+0x24/0x84 el0t_64_sync_handler+0x88/0xec el0t_64_sync+0x1b4/0x1b8 Code: f8695a69 71007d1f 540000e0 927df12a (f940014a) |
| CVE-2022-48761 | In the Linux kernel, the following vulnerability has been resolved: usb: xhci-plat: fix crash when suspend if remote wake enable Crashed at i.mx8qm platform when suspend if enable remote wakeup Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 244 Comm: kworker/u12:6 Not tainted 5.15.5-dirty #12 Hardware name: Freescale i.MX8QM MEK (DT) Workqueue: events_unbound async_run_entry_fn pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xhci_disable_hub_port_wake.isra.62+0x60/0xf8 lr : xhci_disable_hub_port_wake.isra.62+0x34/0xf8 sp : ffff80001394bbf0 x29: ffff80001394bbf0 x28: 0000000000000000 x27: ffff00081193b578 x26: ffff00081193b570 x25: 0000000000000000 x24: 0000000000000000 x23: ffff00081193a29c x22: 0000000000020001 x21: 0000000000000001 x20: 0000000000000000 x19: ffff800014e90490 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000002 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000960 x9 : ffff80001394baa0 x8 : ffff0008145d1780 x7 : ffff0008f95b8e80 x6 : 000000001853b453 x5 : 0000000000000496 x4 : 0000000000000000 x3 : ffff00081193a29c x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff000814591620 Call trace: xhci_disable_hub_port_wake.isra.62+0x60/0xf8 xhci_suspend+0x58/0x510 xhci_plat_suspend+0x50/0x78 platform_pm_suspend+0x2c/0x78 dpm_run_callback.isra.25+0x50/0xe8 __device_suspend+0x108/0x3c0 The basic flow: 1. run time suspend call xhci_suspend, xhci parent devices gate the clock. 2. echo mem >/sys/power/state, system _device_suspend call xhci_suspend 3. xhci_suspend call xhci_disable_hub_port_wake, which access register, but clock already gated by run time suspend. This problem was hidden by power domain driver, which call run time resume before it. But the below commit remove it and make this issue happen. commit c1df456d0f06e ("PM: domains: Don't runtime resume devices at genpd_prepare()") This patch call run time resume before suspend to make sure clock is on before access register. Testeb-by: Abel Vesa <[email protected]> |
| CVE-2022-48760 | In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix hang in usb_kill_urb by adding memory barriers The syzbot fuzzer has identified a bug in which processes hang waiting for usb_kill_urb() to return. It turns out the issue is not unlinking the URB; that works just fine. Rather, the problem arises when the wakeup notification that the URB has completed is not received. The reason is memory-access ordering on SMP systems. In outline form, usb_kill_urb() and __usb_hcd_giveback_urb() operating concurrently on different CPUs perform the following actions: CPU 0 CPU 1 ---------------------------- --------------------------------- usb_kill_urb(): __usb_hcd_giveback_urb(): ... ... atomic_inc(&urb->reject); atomic_dec(&urb->use_count); ... ... wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0); if (atomic_read(&urb->reject)) wake_up(&usb_kill_urb_queue); Confining your attention to urb->reject and urb->use_count, you can see that the overall pattern of accesses on CPU 0 is: write urb->reject, then read urb->use_count; whereas the overall pattern of accesses on CPU 1 is: write urb->use_count, then read urb->reject. This pattern is referred to in memory-model circles as SB (for "Store Buffering"), and it is well known that without suitable enforcement of the desired order of accesses -- in the form of memory barriers -- it is entirely possible for one or both CPUs to execute their reads ahead of their writes. The end result will be that sometimes CPU 0 sees the old un-decremented value of urb->use_count while CPU 1 sees the old un-incremented value of urb->reject. Consequently CPU 0 ends up on the wait queue and never gets woken up, leading to the observed hang in usb_kill_urb(). The same pattern of accesses occurs in usb_poison_urb() and the failure pathway of usb_hcd_submit_urb(). The problem is fixed by adding suitable memory barriers. To provide proper memory-access ordering in the SB pattern, a full barrier is required on both CPUs. The atomic_inc() and atomic_dec() accesses themselves don't provide any memory ordering, but since they are present, we can use the optimized smp_mb__after_atomic() memory barrier in the various routines to obtain the desired effect. This patch adds the necessary memory barriers. |
| CVE-2022-48759 | In the Linux kernel, the following vulnerability has been resolved: rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev struct rpmsg_ctrldev contains a struct cdev. The current code frees the rpmsg_ctrldev struct in rpmsg_ctrldev_release_device(), but the cdev is a managed object, therefore its release is not predictable and the rpmsg_ctrldev could be freed before the cdev is entirely released, as in the backtrace below. [ 93.625603] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x7c [ 93.636115] WARNING: CPU: 0 PID: 12 at lib/debugobjects.c:488 debug_print_object+0x13c/0x1b0 [ 93.644799] Modules linked in: veth xt_cgroup xt_MASQUERADE rfcomm algif_hash algif_skcipher af_alg uinput ip6table_nat fuse uvcvideo videobuf2_vmalloc venus_enc venus_dec videobuf2_dma_contig hci_uart btandroid btqca snd_soc_rt5682_i2c bluetooth qcom_spmi_temp_alarm snd_soc_rt5682v [ 93.715175] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G B 5.4.163-lockdep #26 [ 93.723855] Hardware name: Google Lazor (rev3 - 8) with LTE (DT) [ 93.730055] Workqueue: events kobject_delayed_cleanup [ 93.735271] pstate: 60c00009 (nZCv daif +PAN +UAO) [ 93.740216] pc : debug_print_object+0x13c/0x1b0 [ 93.744890] lr : debug_print_object+0x13c/0x1b0 [ 93.749555] sp : ffffffacf5bc7940 [ 93.752978] x29: ffffffacf5bc7940 x28: dfffffd000000000 [ 93.758448] x27: ffffffacdb11a800 x26: dfffffd000000000 [ 93.763916] x25: ffffffd0734f856c x24: dfffffd000000000 [ 93.769389] x23: 0000000000000000 x22: ffffffd0733c35b0 [ 93.774860] x21: ffffffd0751994a0 x20: ffffffd075ec27c0 [ 93.780338] x19: ffffffd075199100 x18: 00000000000276e0 [ 93.785814] x17: 0000000000000000 x16: dfffffd000000000 [ 93.791291] x15: ffffffffffffffff x14: 6e6968207473696c [ 93.796768] x13: 0000000000000000 x12: ffffffd075e2b000 [ 93.802244] x11: 0000000000000001 x10: 0000000000000000 [ 93.807723] x9 : d13400dff1921900 x8 : d13400dff1921900 [ 93.813200] x7 : 0000000000000000 x6 : 0000000000000000 [ 93.818676] x5 : 0000000000000080 x4 : 0000000000000000 [ 93.824152] x3 : ffffffd0732a0fa4 x2 : 0000000000000001 [ 93.829628] x1 : ffffffacf5bc7580 x0 : 0000000000000061 [ 93.835104] Call trace: [ 93.837644] debug_print_object+0x13c/0x1b0 [ 93.841963] __debug_check_no_obj_freed+0x25c/0x3c0 [ 93.846987] debug_check_no_obj_freed+0x18/0x20 [ 93.851669] slab_free_freelist_hook+0xbc/0x1e4 [ 93.856346] kfree+0xfc/0x2f4 [ 93.859416] rpmsg_ctrldev_release_device+0x78/0xb8 [ 93.864445] device_release+0x84/0x168 [ 93.868310] kobject_cleanup+0x12c/0x298 [ 93.872356] kobject_delayed_cleanup+0x10/0x18 [ 93.876948] process_one_work+0x578/0x92c [ 93.881086] worker_thread+0x804/0xcf8 [ 93.884963] kthread+0x2a8/0x314 [ 93.888303] ret_from_fork+0x10/0x18 The cdev_device_add/del() API was created to address this issue (see commit '233ed09d7fda ("chardev: add helper function to register char devs with a struct device")'), use it instead of cdev add/del(). |
| CVE-2022-48758 | In the Linux kernel, the following vulnerability has been resolved: scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put() The bnx2fc_destroy() functions are removing the interface before calling destroy_work. This results multiple WARNings from sysfs_remove_group() as the controller rport device attributes are removed too early. Replace the fcoe_port's destroy_work queue. It's not needed. The problem is easily reproducible with the following steps. Example: $ dmesg -w & $ systemctl enable --now fcoe $ fipvlan -s -c ens2f1 $ fcoeadm -d ens2f1.802 [ 583.464488] host2: libfc: Link down on port (7500a1) [ 583.472651] bnx2fc: 7500a1 - rport not created Yet!! [ 583.490468] ------------[ cut here ]------------ [ 583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0' [ 583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80 [ 583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ... [ 583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1 [ 583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc] [ 584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80 [ 584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ... [ 584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282 [ 584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000 [ 584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0 [ 584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00 [ 584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400 [ 584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004 [ 584.355379] FS: 0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000 [ 584.394419] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0 [ 584.454888] Call Trace: [ 584.466108] device_del+0xb2/0x3e0 [ 584.481701] device_unregister+0x13/0x60 [ 584.501306] bsg_unregister_queue+0x5b/0x80 [ 584.522029] bsg_remove_queue+0x1c/0x40 [ 584.541884] fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc] [ 584.573823] process_one_work+0x1e3/0x3b0 [ 584.592396] worker_thread+0x50/0x3b0 [ 584.609256] ? rescuer_thread+0x370/0x370 [ 584.628877] kthread+0x149/0x170 [ 584.643673] ? set_kthread_struct+0x40/0x40 [ 584.662909] ret_from_fork+0x22/0x30 [ 584.680002] ---[ end trace 53575ecefa942ece ]--- |
| CVE-2022-48757 | In the Linux kernel, the following vulnerability has been resolved: net: fix information leakage in /proc/net/ptype In one net namespace, after creating a packet socket without binding it to a device, users in other net namespaces can observe the new `packet_type` added by this packet socket by reading `/proc/net/ptype` file. This is minor information leakage as packet socket is namespace aware. Add a net pointer in `packet_type` to keep the net namespace of of corresponding packet socket. In `ptype_seq_show`, this net pointer must be checked when it is not NULL. |
| CVE-2022-48756 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: invalid parameter check in msm_dsi_phy_enable The function performs a check on the "phy" input parameter, however, it is used before the check. Initialize the "dev" variable after the sanity check to avoid a possible NULL pointer dereference. Addresses-Coverity-ID: 1493860 ("Null pointer dereference") |
| CVE-2022-48755 | In the Linux kernel, the following vulnerability has been resolved: powerpc64/bpf: Limit 'ldbrx' to processors compliant with ISA v2.06 Johan reported the below crash with test_bpf on ppc64 e5500: test_bpf: #296 ALU_END_FROM_LE 64: 0x0123456789abcdef -> 0x67452301 jited:1 Oops: Exception in kernel mode, sig: 4 [#1] BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500 Modules linked in: test_bpf(+) CPU: 0 PID: 76 Comm: insmod Not tainted 5.14.0-03771-g98c2059e008a-dirty #1 NIP: 8000000000061c3c LR: 80000000006dea64 CTR: 8000000000061c18 REGS: c0000000032d3420 TRAP: 0700 Not tainted (5.14.0-03771-g98c2059e008a-dirty) MSR: 0000000080089000 <EE,ME> CR: 88002822 XER: 20000000 IRQMASK: 0 <...> NIP [8000000000061c3c] 0x8000000000061c3c LR [80000000006dea64] .__run_one+0x104/0x17c [test_bpf] Call Trace: .__run_one+0x60/0x17c [test_bpf] (unreliable) .test_bpf_init+0x6a8/0xdc8 [test_bpf] .do_one_initcall+0x6c/0x28c .do_init_module+0x68/0x28c .load_module+0x2460/0x2abc .__do_sys_init_module+0x120/0x18c .system_call_exception+0x110/0x1b8 system_call_common+0xf0/0x210 --- interrupt: c00 at 0x101d0acc <...> ---[ end trace 47b2bf19090bb3d0 ]--- Illegal instruction The illegal instruction turned out to be 'ldbrx' emitted for BPF_FROM_[L|B]E, which was only introduced in ISA v2.06. Guard use of the same and implement an alternative approach for older processors. |
| CVE-2022-48754 | In the Linux kernel, the following vulnerability has been resolved: phylib: fix potential use-after-free Commit bafbdd527d56 ("phylib: Add device reset GPIO support") added call to phy_device_reset(phydev) after the put_device() call in phy_detach(). The comment before the put_device() call says that the phydev might go away with put_device(). Fix potential use-after-free by calling phy_device_reset() before put_device(). |
| CVE-2022-48753 | In the Linux kernel, the following vulnerability has been resolved: block: fix memory leak in disk_register_independent_access_ranges kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add() If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix this issue by adding kobject_put(). Callback function blk_ia_ranges_sysfs_release() in kobject_put() can handle the pointer "iars" properly. |
| CVE-2022-48752 | In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: Fix power_pmu_disable to call clear_pmi_irq_pending only if PMI is pending Running selftest with CONFIG_PPC_IRQ_SOFT_MASK_DEBUG enabled in kernel triggered below warning: [ 172.851380] ------------[ cut here ]------------ [ 172.851391] WARNING: CPU: 8 PID: 2901 at arch/powerpc/include/asm/hw_irq.h:246 power_pmu_disable+0x270/0x280 [ 172.851402] Modules linked in: dm_mod bonding nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink sunrpc xfs libcrc32c pseries_rng xts vmx_crypto uio_pdrv_genirq uio sch_fq_codel ip_tables ext4 mbcache jbd2 sd_mod t10_pi sg ibmvscsi ibmveth scsi_transport_srp fuse [ 172.851442] CPU: 8 PID: 2901 Comm: lost_exception_ Not tainted 5.16.0-rc5-03218-g798527287598 #2 [ 172.851451] NIP: c00000000013d600 LR: c00000000013d5a4 CTR: c00000000013b180 [ 172.851458] REGS: c000000017687860 TRAP: 0700 Not tainted (5.16.0-rc5-03218-g798527287598) [ 172.851465] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 48004884 XER: 20040000 [ 172.851482] CFAR: c00000000013d5b4 IRQMASK: 1 [ 172.851482] GPR00: c00000000013d5a4 c000000017687b00 c000000002a10600 0000000000000004 [ 172.851482] GPR04: 0000000082004000 c0000008ba08f0a8 0000000000000000 00000008b7ed0000 [ 172.851482] GPR08: 00000000446194f6 0000000000008000 c00000000013b118 c000000000d58e68 [ 172.851482] GPR12: c00000000013d390 c00000001ec54a80 0000000000000000 0000000000000000 [ 172.851482] GPR16: 0000000000000000 0000000000000000 c000000015d5c708 c0000000025396d0 [ 172.851482] GPR20: 0000000000000000 0000000000000000 c00000000a3bbf40 0000000000000003 [ 172.851482] GPR24: 0000000000000000 c0000008ba097400 c0000000161e0d00 c00000000a3bb600 [ 172.851482] GPR28: c000000015d5c700 0000000000000001 0000000082384090 c0000008ba0020d8 [ 172.851549] NIP [c00000000013d600] power_pmu_disable+0x270/0x280 [ 172.851557] LR [c00000000013d5a4] power_pmu_disable+0x214/0x280 [ 172.851565] Call Trace: [ 172.851568] [c000000017687b00] [c00000000013d5a4] power_pmu_disable+0x214/0x280 (unreliable) [ 172.851579] [c000000017687b40] [c0000000003403ac] perf_pmu_disable+0x4c/0x60 [ 172.851588] [c000000017687b60] [c0000000003445e4] __perf_event_task_sched_out+0x1d4/0x660 [ 172.851596] [c000000017687c50] [c000000000d1175c] __schedule+0xbcc/0x12a0 [ 172.851602] [c000000017687d60] [c000000000d11ea8] schedule+0x78/0x140 [ 172.851608] [c000000017687d90] [c0000000001a8080] sys_sched_yield+0x20/0x40 [ 172.851615] [c000000017687db0] [c0000000000334dc] system_call_exception+0x18c/0x380 [ 172.851622] [c000000017687e10] [c00000000000c74c] system_call_common+0xec/0x268 The warning indicates that MSR_EE being set(interrupt enabled) when there was an overflown PMC detected. This could happen in power_pmu_disable since it runs under interrupt soft disable condition ( local_irq_save ) and not with interrupts hard disabled. commit 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") intended to clear PMI pending bit in Paca when disabling the PMU. It could happen that PMC gets overflown while code is in power_pmu_disable callback function. Hence add a check to see if PMI pending bit is set in Paca before clearing it via clear_pmi_pending. |
| CVE-2022-48751 | In the Linux kernel, the following vulnerability has been resolved: net/smc: Transitional solution for clcsock race issue We encountered a crash in smc_setsockopt() and it is caused by accessing smc->clcsock after clcsock was released. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 50309 Comm: nginx Kdump: loaded Tainted: G E 5.16.0-rc4+ #53 RIP: 0010:smc_setsockopt+0x59/0x280 [smc] Call Trace: <TASK> __sys_setsockopt+0xfc/0x190 __x64_sys_setsockopt+0x20/0x30 do_syscall_64+0x34/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f16ba83918e </TASK> This patch tries to fix it by holding clcsock_release_lock and checking whether clcsock has already been released before access. In case that a crash of the same reason happens in smc_getsockopt() or smc_switch_to_fallback(), this patch also checkes smc->clcsock in them too. And the caller of smc_switch_to_fallback() will identify whether fallback succeeds according to the return value. |
| CVE-2022-48750 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775) Fix crash in clear_caseopen Paweł Marciniak reports the following crash, observed when clearing the chassis intrusion alarm. BUG: kernel NULL pointer dereference, address: 0000000000000028 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 4815 Comm: bash Tainted: G S 5.16.2-200.fc35.x86_64 #1 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P2.60A 05/03/2018 RIP: 0010:clear_caseopen+0x5a/0x120 [nct6775] Code: 68 70 e8 e9 32 b1 e3 85 c0 0f 85 d2 00 00 00 48 83 7c 24 ... RSP: 0018:ffffabcb02803dd8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: ffff8e8808192880 RSI: 0000000000000000 RDI: ffff8e87c7509a68 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000000a R10: 000000000000000a R11: f000000000000000 R12: 000000000000001f R13: ffff8e87c7509828 R14: ffff8e87c7509a68 R15: ffff8e88494527a0 FS: 00007f4db9151740(0000) GS:ffff8e8ebfec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000166b66001 CR4: 00000000001706e0 Call Trace: <TASK> kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x10b/0x180 vfs_write+0x209/0x2a0 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The problem is that the device passed to clear_caseopen() is the hwmon device, not the platform device, and the platform data is not set in the hwmon device. Store the pointer to sio_data in struct nct6775_data and get if from there if needed. |
| CVE-2022-48749 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pcc The function performs a check on the "ctx" input parameter, however, it is used before the check. Initialize the "base" variable after the sanity check to avoid a possible NULL pointer dereference. Addresses-Coverity-ID: 1493866 ("Null pointer dereference") |
| CVE-2022-48748 | In the Linux kernel, the following vulnerability has been resolved: net: bridge: vlan: fix memory leak in __allowed_ingress When using per-vlan state, if vlan snooping and stats are disabled, untagged or priority-tagged ingress frame will go to check pvid state. If the port state is forwarding and the pvid state is not learning/forwarding, untagged or priority-tagged frame will be dropped but skb memory is not freed. Should free skb when __allowed_ingress returns false. |
| CVE-2022-48747 | In the Linux kernel, the following vulnerability has been resolved: block: Fix wrong offset in bio_truncate() bio_truncate() clears the buffer outside of last block of bdev, however current bio_truncate() is using the wrong offset of page. So it can return the uninitialized data. This happened when both of truncated/corrupted FS and userspace (via bdev) are trying to read the last of bdev. |
| CVE-2022-48746 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix handling of wrong devices during bond netevent Current implementation of bond netevent handler only check if the handled netdev is VF representor and it missing a check if the VF representor is on the same phys device of the bond handling the netevent. Fix by adding the missing check and optimizing the check if the netdev is VF representor so it will not access uninitialized private data and crashes. BUG: kernel NULL pointer dereference, address: 000000000000036c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Workqueue: eth3bond0 bond_mii_monitor [bonding] RIP: 0010:mlx5e_is_uplink_rep+0xc/0x50 [mlx5_core] RSP: 0018:ffff88812d69fd60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881cf800000 RCX: 0000000000000000 RDX: ffff88812d69fe10 RSI: 000000000000001b RDI: ffff8881cf800880 RBP: ffff8881cf800000 R08: 00000445cabccf2b R09: 0000000000000008 R10: 0000000000000004 R11: 0000000000000008 R12: ffff88812d69fe10 R13: 00000000fffffffe R14: ffff88820c0f9000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88846fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000036c CR3: 0000000103d80006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5e_eswitch_uplink_rep+0x31/0x40 [mlx5_core] mlx5e_rep_is_lag_netdev+0x94/0xc0 [mlx5_core] mlx5e_rep_esw_bond_netevent+0xeb/0x3d0 [mlx5_core] raw_notifier_call_chain+0x41/0x60 call_netdevice_notifiers_info+0x34/0x80 netdev_lower_state_changed+0x4e/0xa0 bond_mii_monitor+0x56b/0x640 [bonding] process_one_work+0x1b9/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x124/0x150 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 |
| CVE-2022-48745 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Use del_timer_sync in fw reset flow of halting poll Substitute del_timer() with del_timer_sync() in fw reset polling deactivation flow, in order to prevent a race condition which occurs when del_timer() is called and timer is deactivated while another process is handling the timer interrupt. A situation that led to the following call trace: RIP: 0010:run_timer_softirq+0x137/0x420 <IRQ> recalibrate_cpu_khz+0x10/0x10 ktime_get+0x3e/0xa0 ? sched_clock_cpu+0xb/0xc0 __do_softirq+0xf5/0x2ea irq_exit_rcu+0xc1/0xf0 sysvec_apic_timer_interrupt+0x9e/0xc0 asm_sysvec_apic_timer_interrupt+0x12/0x20 </IRQ> |
| CVE-2022-48744 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Avoid field-overflowing memcpy() In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing: #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */ } insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4 */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. "pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). |
| CVE-2022-48743 | In the Linux kernel, the following vulnerability has been resolved: net: amd-xgbe: Fix skb data length underflow There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors. |
| CVE-2022-48742 | In the Linux kernel, the following vulnerability has been resolved: rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink() While looking at one unrelated syzbot bug, I found the replay logic in __rtnl_newlink() to potentially trigger use-after-free. It is better to clear master_dev and m_ops inside the loop, in case we have to replay it. |
| CVE-2022-48741 | In the Linux kernel, the following vulnerability has been resolved: ovl: fix NULL pointer dereference in copy up warning This patch is fixing a NULL pointer dereference to get a recently introduced warning message working. |
| CVE-2022-48740 | In the Linux kernel, the following vulnerability has been resolved: selinux: fix double free of cond_list on error paths On error path from cond_read_list() and duplicate_policydb_cond_list() the cond_list_destroy() gets called a second time in caller functions, resulting in NULL pointer deref. Fix this by resetting the cond_list_len to 0 in cond_list_destroy(), making subsequent calls a noop. Also consistently reset the cond_list pointer to NULL after freeing. [PM: fix line lengths in the description] |
| CVE-2022-48739 | In the Linux kernel, the following vulnerability has been resolved: ASoC: hdmi-codec: Fix OOB memory accesses Correct size of iec_status array by changing it to the size of status array of the struct snd_aes_iec958. This fixes out-of-bounds slab read accesses made by memcpy() of the hdmi-codec driver. This problem is reported by KASAN. |
| CVE-2022-48738 | In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Reject out of bounds values in snd_soc_put_volsw() We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range. |
| CVE-2022-48735 | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix UAF of leds class devs at unbinding The LED class devices that are created by HD-audio codec drivers are registered via devm_led_classdev_register() and associated with the HD-audio codec device. Unfortunately, it turned out that the devres release doesn't work for this case; namely, since the codec resource release happens before the devm call chain, it triggers a NULL dereference or a UAF for a stale set_brightness_delay callback. For fixing the bug, this patch changes the LED class device register and unregister in a manual manner without devres, keeping the instances in hda_gen_spec. |
| CVE-2022-48734 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock between quota disable and qgroup rescan worker Quota disable ioctl starts a transaction before waiting for the qgroup rescan worker completes. However, this wait can be infinite and results in deadlock because of circular dependency among the quota disable ioctl, the qgroup rescan worker and the other task with transaction such as block group relocation task. The deadlock happens with the steps following: 1) Task A calls ioctl to disable quota. It starts a transaction and waits for qgroup rescan worker completes. 2) Task B such as block group relocation task starts a transaction and joins to the transaction that task A started. Then task B commits to the transaction. In this commit, task B waits for a commit by task A. 3) Task C as the qgroup rescan worker starts its job and starts a transaction. In this transaction start, task C waits for completion of the transaction that task A started and task B committed. This deadlock was found with fstests test case btrfs/115 and a zoned null_blk device. The test case enables and disables quota, and the block group reclaim was triggered during the quota disable by chance. The deadlock was also observed by running quota enable and disable in parallel with 'btrfs balance' command on regular null_blk devices. An example report of the deadlock: [372.469894] INFO: task kworker/u16:6:103 blocked for more than 122 seconds. [372.479944] Not tainted 5.16.0-rc8 #7 [372.485067] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [372.493898] task:kworker/u16:6 state:D stack: 0 pid: 103 ppid: 2 flags:0x00004000 [372.503285] Workqueue: btrfs-qgroup-rescan btrfs_work_helper [btrfs] [372.510782] Call Trace: [372.514092] <TASK> [372.521684] __schedule+0xb56/0x4850 [372.530104] ? io_schedule_timeout+0x190/0x190 [372.538842] ? lockdep_hardirqs_on+0x7e/0x100 [372.547092] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [372.555591] schedule+0xe0/0x270 [372.561894] btrfs_commit_transaction+0x18bb/0x2610 [btrfs] [372.570506] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs] [372.578875] ? free_unref_page+0x3f2/0x650 [372.585484] ? finish_wait+0x270/0x270 [372.591594] ? release_extent_buffer+0x224/0x420 [btrfs] [372.599264] btrfs_qgroup_rescan_worker+0xc13/0x10c0 [btrfs] [372.607157] ? lock_release+0x3a9/0x6d0 [372.613054] ? btrfs_qgroup_account_extent+0xda0/0xda0 [btrfs] [372.620960] ? do_raw_spin_lock+0x11e/0x250 [372.627137] ? rwlock_bug.part.0+0x90/0x90 [372.633215] ? lock_is_held_type+0xe4/0x140 [372.639404] btrfs_work_helper+0x1ae/0xa90 [btrfs] [372.646268] process_one_work+0x7e9/0x1320 [372.652321] ? lock_release+0x6d0/0x6d0 [372.658081] ? pwq_dec_nr_in_flight+0x230/0x230 [372.664513] ? rwlock_bug.part.0+0x90/0x90 [372.670529] worker_thread+0x59e/0xf90 [372.676172] ? process_one_work+0x1320/0x1320 [372.682440] kthread+0x3b9/0x490 [372.687550] ? _raw_spin_unlock_irq+0x24/0x50 [372.693811] ? set_kthread_struct+0x100/0x100 [372.700052] ret_from_fork+0x22/0x30 [372.705517] </TASK> [372.709747] INFO: task btrfs-transacti:2347 blocked for more than 123 seconds. [372.729827] Not tainted 5.16.0-rc8 #7 [372.745907] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [372.767106] task:btrfs-transacti state:D stack: 0 pid: 2347 ppid: 2 flags:0x00004000 [372.787776] Call Trace: [372.801652] <TASK> [372.812961] __schedule+0xb56/0x4850 [372.830011] ? io_schedule_timeout+0x190/0x190 [372.852547] ? lockdep_hardirqs_on+0x7e/0x100 [372.871761] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [372.886792] schedule+0xe0/0x270 [372.901685] wait_current_trans+0x22c/0x310 [btrfs] [372.919743] ? btrfs_put_transaction+0x3d0/0x3d0 [btrfs] [372.938923] ? finish_wait+0x270/0x270 [372.959085] ? join_transaction+0xc7 ---truncated--- |
| CVE-2022-48733 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free after failure to create a snapshot At ioctl.c:create_snapshot(), we allocate a pending snapshot structure and then attach it to the transaction's list of pending snapshots. After that we call btrfs_commit_transaction(), and if that returns an error we jump to 'fail' label, where we kfree() the pending snapshot structure. This can result in a later use-after-free of the pending snapshot: 1) We allocated the pending snapshot and added it to the transaction's list of pending snapshots; 2) We call btrfs_commit_transaction(), and it fails either at the first call to btrfs_run_delayed_refs() or btrfs_start_dirty_block_groups(). In both cases, we don't abort the transaction and we release our transaction handle. We jump to the 'fail' label and free the pending snapshot structure. We return with the pending snapshot still in the transaction's list; 3) Another task commits the transaction. This time there's no error at all, and then during the transaction commit it accesses a pointer to the pending snapshot structure that the snapshot creation task has already freed, resulting in a user-after-free. This issue could actually be detected by smatch, which produced the following warning: fs/btrfs/ioctl.c:843 create_snapshot() warn: '&pending_snapshot->list' not removed from list So fix this by not having the snapshot creation ioctl directly add the pending snapshot to the transaction's list. Instead add the pending snapshot to the transaction handle, and then at btrfs_commit_transaction() we add the snapshot to the list only when we can guarantee that any error returned after that point will result in a transaction abort, in which case the ioctl code can safely free the pending snapshot and no one can access it anymore. |
| CVE-2022-48732 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix off by one in BIOS boundary checking Bounds checking when parsing init scripts embedded in the BIOS reject access to the last byte. This causes driver initialization to fail on Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working console. This is probably only seen on OpenFirmware machines like PowerPC Macs because the BIOS image provided by OF is only the used parts of the ROM, not a power-of-two blocks read from PCI directly so PCs always have empty bytes at the end that are never accessed. |
| CVE-2022-48731 | In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid scanning potential huge holes When using devm_request_free_mem_region() and devm_memremap_pages() to add ZONE_DEVICE memory, if requested free mem region's end pfn were huge(e.g., 0x400000000), the node_end_pfn() will be also huge (see move_pfn_range_to_zone()). Thus it creates a huge hole between node_start_pfn() and node_end_pfn(). We found on some AMD APUs, amdkfd requested such a free mem region and created a huge hole. In such a case, following code snippet was just doing busy test_bit() looping on the huge hole. for (pfn = start_pfn; pfn < end_pfn; pfn++) { struct page *page = pfn_to_online_page(pfn); if (!page) continue; ... } So we got a soft lockup: watchdog: BUG: soft lockup - CPU#6 stuck for 26s! [bash:1221] CPU: 6 PID: 1221 Comm: bash Not tainted 5.15.0-custom #1 RIP: 0010:pfn_to_online_page+0x5/0xd0 Call Trace: ? kmemleak_scan+0x16a/0x440 kmemleak_write+0x306/0x3a0 ? common_file_perm+0x72/0x170 full_proxy_write+0x5c/0x90 vfs_write+0xb9/0x260 ksys_write+0x67/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae I did some tests with the patch. (1) amdgpu module unloaded before the patch: real 0m0.976s user 0m0.000s sys 0m0.968s after the patch: real 0m0.981s user 0m0.000s sys 0m0.973s (2) amdgpu module loaded before the patch: real 0m35.365s user 0m0.000s sys 0m35.354s after the patch: real 0m1.049s user 0m0.000s sys 0m1.042s |
| CVE-2022-48730 | In the Linux kernel, the following vulnerability has been resolved: dma-buf: heaps: Fix potential spectre v1 gadget It appears like nr could be a Spectre v1 gadget as it's supplied by a user and used as an array index. Prevent the contents of kernel memory from being leaked to userspace via speculative execution by using array_index_nospec. [sumits: added fixes and cc: stable tags] |
| CVE-2022-48729 | In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix panic with larger ipoib send_queue_size When the ipoib send_queue_size is increased from the default the following panic happens: RIP: 0010:hfi1_ipoib_drain_tx_ring+0x45/0xf0 [hfi1] Code: 31 e4 eb 0f 8b 85 c8 02 00 00 41 83 c4 01 44 39 e0 76 60 8b 8d cc 02 00 00 44 89 e3 be 01 00 00 00 d3 e3 48 03 9d c0 02 00 00 <c7> 83 18 01 00 00 00 00 00 00 48 8b bb 30 01 00 00 e8 25 af a7 e0 RSP: 0018:ffffc9000798f4a0 EFLAGS: 00010286 RAX: 0000000000008000 RBX: ffffc9000aa0f000 RCX: 000000000000000f RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffff88810ff08000 R08: ffff88889476d900 R09: 0000000000000101 R10: 0000000000000000 R11: ffffc90006590ff8 R12: 0000000000000200 R13: ffffc9000798fba8 R14: 0000000000000000 R15: 0000000000000001 FS: 00007fd0f79cc3c0(0000) GS:ffff88885fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000aa0f118 CR3: 0000000889c84001 CR4: 00000000001706e0 Call Trace: <TASK> hfi1_ipoib_napi_tx_disable+0x45/0x60 [hfi1] hfi1_ipoib_dev_stop+0x18/0x80 [hfi1] ipoib_ib_dev_stop+0x1d/0x40 [ib_ipoib] ipoib_stop+0x48/0xc0 [ib_ipoib] __dev_close_many+0x9e/0x110 __dev_change_flags+0xd9/0x210 dev_change_flags+0x21/0x60 do_setlink+0x31c/0x10f0 ? __nla_validate_parse+0x12d/0x1a0 ? __nla_parse+0x21/0x30 ? inet6_validate_link_af+0x5e/0xf0 ? cpumask_next+0x1f/0x20 ? __snmp6_fill_stats64.isra.53+0xbb/0x140 ? __nla_validate_parse+0x47/0x1a0 __rtnl_newlink+0x530/0x910 ? pskb_expand_head+0x73/0x300 ? __kmalloc_node_track_caller+0x109/0x280 ? __nla_put+0xc/0x20 ? cpumask_next_and+0x20/0x30 ? update_sd_lb_stats.constprop.144+0xd3/0x820 ? _raw_spin_unlock_irqrestore+0x25/0x37 ? __wake_up_common_lock+0x87/0xc0 ? kmem_cache_alloc_trace+0x3d/0x3d0 rtnl_newlink+0x43/0x60 The issue happens when the shift that should have been a function of the txq item size mistakenly used the ring size. Fix by using the item size. |
| CVE-2022-48728 | In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix AIP early init panic An early failure in hfi1_ipoib_setup_rn() can lead to the following panic: BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0 PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI Workqueue: events work_for_cpu_fn RIP: 0010:try_to_grab_pending+0x2b/0x140 Code: 1f 44 00 00 41 55 41 54 55 48 89 d5 53 48 89 fb 9c 58 0f 1f 44 00 00 48 89 c2 fa 66 0f 1f 44 00 00 48 89 55 00 40 84 f6 75 77 <f0> 48 0f ba 2b 00 72 09 31 c0 5b 5d 41 5c 41 5d c3 48 89 df e8 6c RSP: 0018:ffffb6b3cf7cfa48 EFLAGS: 00010046 RAX: 0000000000000246 RBX: 00000000000001b0 RCX: 0000000000000000 RDX: 0000000000000246 RSI: 0000000000000000 RDI: 00000000000001b0 RBP: ffffb6b3cf7cfa70 R08: 0000000000000f09 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffb6b3cf7cfa90 R14: ffffffff9b2fbfc0 R15: ffff8a4fdf244690 FS: 0000000000000000(0000) GS:ffff8a527f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001b0 CR3: 00000017e2410003 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __cancel_work_timer+0x42/0x190 ? dev_printk_emit+0x4e/0x70 iowait_cancel_work+0x15/0x30 [hfi1] hfi1_ipoib_txreq_deinit+0x5a/0x220 [hfi1] ? dev_err+0x6c/0x90 hfi1_ipoib_netdev_dtor+0x15/0x30 [hfi1] hfi1_ipoib_setup_rn+0x10e/0x150 [hfi1] rdma_init_netdev+0x5a/0x80 [ib_core] ? hfi1_ipoib_free_rdma_netdev+0x20/0x20 [hfi1] ipoib_intf_init+0x6c/0x350 [ib_ipoib] ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib] ipoib_add_one+0xbe/0x300 [ib_ipoib] add_client_context+0x12c/0x1a0 [ib_core] enable_device_and_get+0xdc/0x1d0 [ib_core] ib_register_device+0x572/0x6b0 [ib_core] rvt_register_device+0x11b/0x220 [rdmavt] hfi1_register_ib_device+0x6b4/0x770 [hfi1] do_init_one.isra.20+0x3e3/0x680 [hfi1] local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The panic happens in hfi1_ipoib_txreq_deinit() because there is a NULL deref when hfi1_ipoib_netdev_dtor() is called in this error case. hfi1_ipoib_txreq_init() and hfi1_ipoib_rxq_init() are self unwinding so fix by adjusting the error paths accordingly. Other changes: - hfi1_ipoib_free_rdma_netdev() is deleted including the free_netdev() since the netdev core code deletes calls free_netdev() - The switch to the accelerated entrances is moved to the success path. |
| CVE-2022-48727 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Avoid consuming a stale esr value when SError occur When any exception other than an IRQ occurs, the CPU updates the ESR_EL2 register with the exception syndrome. An SError may also become pending, and will be synchronised by KVM. KVM notes the exception type, and whether an SError was synchronised in exit_code. When an exception other than an IRQ occurs, fixup_guest_exit() updates vcpu->arch.fault.esr_el2 from the hardware register. When an SError was synchronised, the vcpu esr value is used to determine if the exception was due to an HVC. If so, ELR_EL2 is moved back one instruction. This is so that KVM can process the SError first, and re-execute the HVC if the guest survives the SError. But if an IRQ synchronises an SError, the vcpu's esr value is stale. If the previous non-IRQ exception was an HVC, KVM will corrupt ELR_EL2, causing an unrelated guest instruction to be executed twice. Check ARM_EXCEPTION_CODE() before messing with ELR_EL2, IRQs don't update this register so don't need to check. |
| CVE-2022-48726 | In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Protect mc during concurrent multicast leaves Partially revert the commit mentioned in the Fixes line to make sure that allocation and erasing multicast struct are locked. BUG: KASAN: use-after-free in ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] BUG: KASAN: use-after-free in ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 Read of size 8 at addr ffff88801bb74b00 by task syz-executor.1/25529 CPU: 0 PID: 25529 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 ucma_destroy_id+0x1e6/0x280 drivers/infiniband/core/ucma.c:614 ucma_write+0x25c/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xae0 fs/read_write.c:588 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Currently the xarray search can touch a concurrently freeing mc as the xa_for_each() is not surrounded by any lock. Rather than hold the lock for a full scan hold it only for the effected items, which is usually an empty list. |
| CVE-2022-48725 | In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix refcounting leak in siw_create_qp() The atomic_inc() needs to be paired with an atomic_dec() on the error path. |
| CVE-2022-48724 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping() After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated"). For tear down scenario, fn is only freed after fail to allocate ir_domain, though it also should be freed in case dmar_enable_qi returns error. Besides free fn, irq_domain and ir_msi_domain need to be removed as well if intel_setup_irq_remapping fails to enable queued invalidation. Improve the rewinding path by add out_free_ir_domain and out_free_fwnode lables per Baolu's suggestion. |
| CVE-2022-48723 | In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: fix reference count leak in uniphier_spi_probe() The issue happens in several error paths in uniphier_spi_probe(). When either dma_get_slave_caps() or devm_spi_register_master() returns an error code, the function forgets to decrease the refcount of both `dma_rx` and `dma_tx` objects, which may lead to refcount leaks. Fix it by decrementing the reference count of specific objects in those error paths. |
| CVE-2022-48722 | In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: ca8210: Stop leaking skb's Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. We then leak the skb structure. Free the skb structure upon error before returning. |
| CVE-2022-48721 | In the Linux kernel, the following vulnerability has been resolved: net/smc: Forward wakeup to smc socket waitqueue after fallback When we replace TCP with SMC and a fallback occurs, there may be some socket waitqueue entries remaining in smc socket->wq, such as eppoll_entries inserted by userspace applications. After the fallback, data flows over TCP/IP and only clcsocket->wq will be woken up. Applications can't be notified by the entries which were inserted in smc socket->wq before fallback. So we need a mechanism to wake up smc socket->wq at the same time if some entries remaining in it. The current workaround is to transfer the entries from smc socket->wq to clcsock->wq during the fallback. But this may cause a crash like this: general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E 5.16.0+ #107 RIP: 0010:__wake_up_common+0x65/0x170 Call Trace: <IRQ> __wake_up_common_lock+0x7a/0xc0 sock_def_readable+0x3c/0x70 tcp_data_queue+0x4a7/0xc40 tcp_rcv_established+0x32f/0x660 ? sk_filter_trim_cap+0xcb/0x2e0 tcp_v4_do_rcv+0x10b/0x260 tcp_v4_rcv+0xd2a/0xde0 ip_protocol_deliver_rcu+0x3b/0x1d0 ip_local_deliver_finish+0x54/0x60 ip_local_deliver+0x6a/0x110 ? tcp_v4_early_demux+0xa2/0x140 ? tcp_v4_early_demux+0x10d/0x140 ip_sublist_rcv_finish+0x49/0x60 ip_sublist_rcv+0x19d/0x230 ip_list_rcv+0x13e/0x170 __netif_receive_skb_list_core+0x1c2/0x240 netif_receive_skb_list_internal+0x1e6/0x320 napi_complete_done+0x11d/0x190 mlx5e_napi_poll+0x163/0x6b0 [mlx5_core] __napi_poll+0x3c/0x1b0 net_rx_action+0x27c/0x300 __do_softirq+0x114/0x2d2 irq_exit_rcu+0xb4/0xe0 common_interrupt+0xba/0xe0 </IRQ> <TASK> The crash is caused by privately transferring waitqueue entries from smc socket->wq to clcsock->wq. The owners of these entries, such as epoll, have no idea that the entries have been transferred to a different socket wait queue and still use original waitqueue spinlock (smc socket->wq.wait.lock) to make the entries operation exclusive, but it doesn't work. The operations to the entries, such as removing from the waitqueue (now is clcsock->wq after fallback), may cause a crash when clcsock waitqueue is being iterated over at the moment. This patch tries to fix this by no longer transferring wait queue entries privately, but introducing own implementations of clcsock's callback functions in fallback situation. The callback functions will forward the wakeup to smc socket->wq if clcsock->wq is actually woken up and smc socket->wq has remaining entries. |
| CVE-2022-48720 | In the Linux kernel, the following vulnerability has been resolved: net: macsec: Fix offload support for NETDEV_UNREGISTER event Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources. Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event. |
| CVE-2022-48719 | In the Linux kernel, the following vulnerability has been resolved: net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work syzkaller was able to trigger a deadlock for NTF_MANAGED entries [0]: kworker/0:16/14617 is trying to acquire lock: ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652 [...] but task is already holding lock: ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: neigh_managed_work+0x35/0x250 net/core/neighbour.c:1572 The neighbor entry turned to NUD_FAILED state, where __neigh_event_send() triggered an immediate probe as per commit cd28ca0a3dd1 ("neigh: reduce arp latency") via neigh_probe() given table lock was held. One option to fix this situation is to defer the neigh_probe() back to the neigh_timer_handler() similarly as pre cd28ca0a3dd1. For the case of NTF_MANAGED, this deferral is acceptable given this only happens on actual failure state and regular / expected state is NUD_VALID with the entry already present. The fix adds a parameter to __neigh_event_send() in order to communicate whether immediate probe is allowed or disallowed. Existing call-sites of neigh_event_send() default as-is to immediate probe. However, the neigh_managed_work() disables it via use of neigh_event_send_probe(). [0] <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2956 [inline] check_deadlock kernel/locking/lockdep.c:2999 [inline] validate_chain kernel/locking/lockdep.c:3788 [inline] __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5027 lock_acquire kernel/locking/lockdep.c:5639 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5604 __raw_write_lock_bh include/linux/rwlock_api_smp.h:202 [inline] _raw_write_lock_bh+0x2f/0x40 kernel/locking/spinlock.c:334 ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652 ip6_finish_output2+0x1070/0x14f0 net/ipv6/ip6_output.c:123 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0xa99/0x17f0 net/ipv6/ndisc.c:508 ndisc_send_ns+0x3a9/0x840 net/ipv6/ndisc.c:650 ndisc_solicit+0x2cd/0x4f0 net/ipv6/ndisc.c:742 neigh_probe+0xc2/0x110 net/core/neighbour.c:1040 __neigh_event_send+0x37d/0x1570 net/core/neighbour.c:1201 neigh_event_send include/net/neighbour.h:470 [inline] neigh_managed_work+0x162/0x250 net/core/neighbour.c:1574 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> |
| CVE-2022-48718 | In the Linux kernel, the following vulnerability has been resolved: drm: mxsfb: Fix NULL pointer dereference mxsfb should not ever dereference the NULL pointer which drm_atomic_get_new_bridge_state is allowed to return. Assume a fixed format instead. |
| CVE-2022-48717 | In the Linux kernel, the following vulnerability has been resolved: ASoC: max9759: fix underflow in speaker_gain_control_put() Check for negative values of "priv->gain" to prevent an out of bounds access. The concern is that these might come from the user via: -> snd_ctl_elem_write_user() -> snd_ctl_elem_write() -> kctl->put() |
| CVE-2022-48716 | In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd938x: fix incorrect used of portid Mixer controls have the channel id in mixer->reg, which is not same as port id. port id should be derived from chan_info array. So fix this. Without this, its possible that we could corrupt struct wcd938x_sdw_priv by accessing port_map array out of range with channel id instead of port id. |
| CVE-2022-48715 | In the Linux kernel, the following vulnerability has been resolved: scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe Running tests with a debug kernel shows that bnx2fc_recv_frame() is modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot a debug kernel and run the bnx2fc driver with the hardware enabled. [ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_ [ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G B [ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 1391.699183] Call Trace: [ 1391.699188] dump_stack_lvl+0x57/0x7d [ 1391.699198] check_preemption_disabled+0xc8/0xd0 [ 1391.699205] bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699215] ? do_raw_spin_trylock+0xb5/0x180 [ 1391.699221] ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc] [ 1391.699229] ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc] [ 1391.699240] bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc] [ 1391.699250] ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc] [ 1391.699258] kthread+0x364/0x420 [ 1391.699263] ? _raw_spin_unlock_irq+0x24/0x50 [ 1391.699268] ? set_kthread_struct+0x100/0x100 [ 1391.699273] ret_from_fork+0x22/0x30 Restore the old get_cpu/put_cpu code with some modifications to reduce the size of the critical section. |
| CVE-2022-48714 | In the Linux kernel, the following vulnerability has been resolved: bpf: Use VM_MAP instead of VM_ALLOC for ringbuf After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages after mapping"), non-VM_ALLOC mappings will be marked as accessible in __get_vm_area_node() when KASAN is enabled. But now the flag for ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access after vmap() returns. Because the ringbuf area is created by mapping allocated pages, so use VM_MAP instead. After the change, info in /proc/vmallocinfo also changes from [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user to [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user |
| CVE-2022-48713 | In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/pt: Fix crash with stop filters in single-range mode Add a check for !buf->single before calling pt_buffer_region_size in a place where a missing check can cause a kernel crash. Fixes a bug introduced by commit 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode"), which added a support for PT single-range output mode. Since that commit if a PT stop filter range is hit while tracing, the kernel will crash because of a null pointer dereference in pt_handle_status due to calling pt_buffer_region_size without a ToPA configured. The commit which introduced single-range mode guarded almost all uses of the ToPA buffer variables with checks of the buf->single variable, but missed the case where tracing was stopped by the PT hardware, which happens when execution hits a configured stop filter. Tested that hitting a stop filter while PT recording successfully records a trace with this patch but crashes without this patch. |
| CVE-2022-48712 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix error handling in ext4_fc_record_modified_inode() Current code does not fully takes care of krealloc() error case, which could lead to silent memory corruption or a kernel bug. This patch fixes that. Also it cleans up some duplicated error handling logic from various functions in fast_commit.c file. |
| CVE-2022-48711 | In the Linux kernel, the following vulnerability has been resolved: tipc: improve size validations for received domain records The function tipc_mon_rcv() allows a node to receive and process domain_record structs from peer nodes to track their views of the network topology. This patch verifies that the number of members in a received domain record does not exceed the limit defined by MAX_MON_DOMAIN, something that may otherwise lead to a stack overflow. tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where we are reading a 32 bit message data length field into a uint16. To avert any risk of bit overflow, we add an extra sanity check for this in that function. We cannot see that happen with the current code, but future designers being unaware of this risk, may introduce it by allowing delivery of very large (> 64k) sk buffers from the bearer layer. This potential problem was identified by Eric Dumazet. This fixes CVE-2022-0435 |
| CVE-2022-48710 | In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix a possible null pointer dereference In radeon_fp_native_mode(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. The failure status of drm_cvt_mode() on the other path is checked too. |
| CVE-2022-48709 | In the Linux kernel, the following vulnerability has been resolved: ice: switch: fix potential memleak in ice_add_adv_recipe() When ice_add_special_words() fails, the 'rm' is not released, which will lead to a memory leak. Fix this up by going to 'err_unroll' label. Compile tested only. |
| CVE-2022-48708 | In the Linux kernel, the following vulnerability has been resolved: pinctrl: single: fix potential NULL dereference Added checking of pointer "function" in pcs_set_mux(). pinmux_generic_get_function() can return NULL and the pointer "function" was dereferenced without checking against NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2022-48707 | In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix null pointer dereference for resetting decoder Not all decoders have a reset callback. The CXL specification allows a host bridge with a single root port to have no explicit HDM decoders. Currently the region driver assumes there are none. As such the CXL core creates a special pass through decoder instance without a commit/reset callback. Prior to this patch, the ->reset() callback was called unconditionally when calling cxl_region_decode_reset. Thus a configuration with 1 Host Bridge, 1 Root Port, and one directly attached CXL type 3 device or multiple CXL type 3 devices attached to downstream ports of a switch can cause a null pointer dereference. Before the fix, a kernel crash was observed when we destroy the region, and a pass through decoder is reset. The issue can be reproduced as below, 1) create a region with a CXL setup which includes a HB with a single root port under which a memdev is attached directly. 2) destroy the region with cxl destroy-region regionX -f. |
| CVE-2022-48706 | In the Linux kernel, the following vulnerability has been resolved: vdpa: ifcvf: Do proper cleanup if IFCVF init fails ifcvf_mgmt_dev leaks memory if it is not freed before returning. Call is made to correct return statement so memory does not leak. ifcvf_init_hw does not take care of this so it is needed to do it here. |
| CVE-2022-48705 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921e: fix crash in chip reset fail In case of drv own fail in reset, we may need to run mac_reset several times. The sequence would trigger system crash as the log below. Because we do not re-enable/schedule "tx_napi" before disable it again, the process would keep waiting for state change in napi_diable(). To avoid the problem and keep status synchronize for each run, goto final resource handling if drv own failed. [ 5857.353423] mt7921e 0000:3b:00.0: driver own failed [ 5858.433427] mt7921e 0000:3b:00.0: Timeout for driver own [ 5859.633430] mt7921e 0000:3b:00.0: driver own failed [ 5859.633444] ------------[ cut here ]------------ [ 5859.633446] WARNING: CPU: 6 at kernel/kthread.c:659 kthread_park+0x11d [ 5859.633717] Workqueue: mt76 mt7921_mac_reset_work [mt7921_common] [ 5859.633728] RIP: 0010:kthread_park+0x11d/0x150 [ 5859.633736] RSP: 0018:ffff8881b676fc68 EFLAGS: 00010202 ...... [ 5859.633766] Call Trace: [ 5859.633768] <TASK> [ 5859.633771] mt7921e_mac_reset+0x176/0x6f0 [mt7921e] [ 5859.633778] mt7921_mac_reset_work+0x184/0x3a0 [mt7921_common] [ 5859.633785] ? mt7921_mac_set_timing+0x520/0x520 [mt7921_common] [ 5859.633794] ? __kasan_check_read+0x11/0x20 [ 5859.633802] process_one_work+0x7ee/0x1320 [ 5859.633810] worker_thread+0x53c/0x1240 [ 5859.633818] kthread+0x2b8/0x370 [ 5859.633824] ? process_one_work+0x1320/0x1320 [ 5859.633828] ? kthread_complete_and_exit+0x30/0x30 [ 5859.633834] ret_from_fork+0x1f/0x30 [ 5859.633842] </TASK> |
| CVE-2022-48704 | In the Linux kernel, the following vulnerability has been resolved: drm/radeon: add a force flush to delay work when radeon Although radeon card fence and wait for gpu to finish processing current batch rings, there is still a corner case that radeon lockup work queue may not be fully flushed, and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to put device in D3hot state. Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State. > Configuration and Message requests are the only TLPs accepted by a Function in > the D3hot state. All other received Requests must be handled as Unsupported Requests, > and all received Completions may optionally be handled as Unexpected Completions. This issue will happen in following logs: Unable to handle kernel paging request at virtual address 00008800e0008010 CPU 0 kworker/0:3(131): Oops 0 pc = [<ffffffff811bea5c>] ra = [<ffffffff81240844>] ps = 0000 Tainted: G W pc is at si_gpu_check_soft_reset+0x3c/0x240 ra is at si_dma_is_lockup+0x34/0xd0 v0 = 0000000000000000 t0 = fff08800e0008010 t1 = 0000000000010000 t2 = 0000000000008010 t3 = fff00007e3c00000 t4 = fff00007e3c00258 t5 = 000000000000ffff t6 = 0000000000000001 t7 = fff00007ef078000 s0 = fff00007e3c016e8 s1 = fff00007e3c00000 s2 = fff00007e3c00018 s3 = fff00007e3c00000 s4 = fff00007fff59d80 s5 = 0000000000000000 s6 = fff00007ef07bd98 a0 = fff00007e3c00000 a1 = fff00007e3c016e8 a2 = 0000000000000008 a3 = 0000000000000001 a4 = 8f5c28f5c28f5c29 a5 = ffffffff810f4338 t8 = 0000000000000275 t9 = ffffffff809b66f8 t10 = ff6769c5d964b800 t11= 000000000000b886 pv = ffffffff811bea20 at = 0000000000000000 gp = ffffffff81d89690 sp = 00000000aa814126 Disabling lock debugging due to kernel taint Trace: [<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0 [<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290 [<ffffffff80977010>] process_one_work+0x280/0x550 [<ffffffff80977350>] worker_thread+0x70/0x7c0 [<ffffffff80977410>] worker_thread+0x130/0x7c0 [<ffffffff80982040>] kthread+0x200/0x210 [<ffffffff809772e0>] worker_thread+0x0/0x7c0 [<ffffffff80981f8c>] kthread+0x14c/0x210 [<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20 [<ffffffff80981e40>] kthread+0x0/0x210 Code: ad3e0008 43f0074a ad7e0018 ad9e0020 8c3001e8 40230101 <88210000> 4821ed21 So force lockup work queue flush to fix this problem. |
| CVE-2022-48703 | In the Linux kernel, the following vulnerability has been resolved: thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR In some case, the GDDV returns a package with a buffer which has zero length. It causes that kmemdup() returns ZERO_SIZE_PTR (0x10). Then the data_vault_read() got NULL point dereference problem when accessing the 0x10 value in data_vault. [ 71.024560] BUG: kernel NULL pointer dereference, address: 0000000000000010 This patch uses ZERO_OR_NULL_PTR() for checking ZERO_SIZE_PTR or NULL value in data_vault. |
| CVE-2022-48702 | In the Linux kernel, the following vulnerability has been resolved: ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc() The voice allocator sometimes begins allocating from near the end of the array and then wraps around, however snd_emu10k1_pcm_channel_alloc() accesses the newly allocated voices as if it never wrapped around. This results in out of bounds access if the first voice has a high enough index so that first_voice + requested_voice_count > NUM_G (64). The more voices are requested, the more likely it is for this to occur. This was initially discovered using PipeWire, however it can be reproduced by calling aplay multiple times with 16 channels: aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40 index 65 is out of range for type 'snd_emu10k1_voice [64]' CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ #7 Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010 Call Trace: <TASK> dump_stack_lvl+0x49/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x3f __ubsan_handle_out_of_bounds.cold+0x44/0x49 snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1] snd_pcm_hw_params+0x29f/0x600 [snd_pcm] snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm] ? exit_to_user_mode_prepare+0x35/0x170 ? do_syscall_64+0x69/0x90 ? syscall_exit_to_user_mode+0x26/0x50 ? do_syscall_64+0x69/0x90 ? exit_to_user_mode_prepare+0x35/0x170 snd_pcm_ioctl+0x27/0x40 [snd_pcm] __x64_sys_ioctl+0x95/0xd0 do_syscall_64+0x5c/0x90 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| CVE-2022-48701 | In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface() There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and the number of it's interfaces less than 4, an out-of-bounds read bug occurs when parsing the interface descriptor for this device. Fix this by checking the number of interfaces. |
| CVE-2022-48700 | In the Linux kernel, the following vulnerability has been resolved: vfio/type1: Unpin zero pages There's currently a reference count leak on the zero page. We increment the reference via pin_user_pages_remote(), but the page is later handled as an invalid/reserved page, therefore it's not accounted against the user and not unpinned by our put_pfn(). Introducing special zero page handling in put_pfn() would resolve the leak, but without accounting of the zero page, a single user could still create enough mappings to generate a reference count overflow. The zero page is always resident, so for our purposes there's no reason to keep it pinned. Therefore, add a loop to walk pages returned from pin_user_pages_remote() and unpin any zero pages. |
| CVE-2022-48699 | In the Linux kernel, the following vulnerability has been resolved: sched/debug: fix dentry leak in update_sched_domain_debugfs Kuyo reports that the pattern of using debugfs_remove(debugfs_lookup()) leaks a dentry and with a hotplug stress test, the machine eventually runs out of memory. Fix this up by using the newly created debugfs_lookup_and_remove() call instead which properly handles the dentry reference counting logic. |
| CVE-2022-48698 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix memory leak when using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up by properly calling dput(). |
| CVE-2022-48697 | In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a use-after-free Fix the following use-after-free complaint triggered by blktests nvme/004: BUG: KASAN: user-memory-access in blk_mq_complete_request_remote+0xac/0x350 Read of size 4 at addr 0000607bd1835943 by task kworker/13:1/460 Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e print_report.cold+0x36/0x1e2 kasan_report+0xb9/0xf0 __asan_load4+0x6b/0x80 blk_mq_complete_request_remote+0xac/0x350 nvme_loop_queue_response+0x1df/0x275 [nvme_loop] __nvmet_req_complete+0x132/0x4f0 [nvmet] nvmet_req_complete+0x15/0x40 [nvmet] nvmet_execute_io_connect+0x18a/0x1f0 [nvmet] nvme_loop_execute_work+0x20/0x30 [nvme_loop] process_one_work+0x56e/0xa70 worker_thread+0x2d1/0x640 kthread+0x183/0x1c0 ret_from_fork+0x1f/0x30 |
| CVE-2022-48696 | In the Linux kernel, the following vulnerability has been resolved: regmap: spi: Reserve space for register address/padding Currently the max_raw_read and max_raw_write limits in regmap_spi struct do not take into account the additional size of the transmitted register address and padding. This may result in exceeding the maximum permitted SPI message size, which could cause undefined behaviour, e.g. data corruption. Fix regmap_get_spi_bus() to properly adjust the above mentioned limits by reserving space for the register address/padding as set in the regmap configuration. |
| CVE-2022-48695 | In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix use-after-free warning Fix the following use-after-free warning which is observed during controller reset: refcount_t: underflow; use-after-free. WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 |
| CVE-2022-48694 | In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix drain SQ hang with no completion SW generated completions for outstanding WRs posted on SQ after QP is in error target the wrong CQ. This causes the ib_drain_sq to hang with no completion. Fix this to generate completions on the right CQ. [ 863.969340] INFO: task kworker/u52:2:671 blocked for more than 122 seconds. [ 863.979224] Not tainted 5.14.0-130.el9.x86_64 #1 [ 863.986588] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 863.996997] task:kworker/u52:2 state:D stack: 0 pid: 671 ppid: 2 flags:0x00004000 [ 864.007272] Workqueue: xprtiod xprt_autoclose [sunrpc] [ 864.014056] Call Trace: [ 864.017575] __schedule+0x206/0x580 [ 864.022296] schedule+0x43/0xa0 [ 864.026736] schedule_timeout+0x115/0x150 [ 864.032185] __wait_for_common+0x93/0x1d0 [ 864.037717] ? usleep_range_state+0x90/0x90 [ 864.043368] __ib_drain_sq+0xf6/0x170 [ib_core] [ 864.049371] ? __rdma_block_iter_next+0x80/0x80 [ib_core] [ 864.056240] ib_drain_sq+0x66/0x70 [ib_core] [ 864.062003] rpcrdma_xprt_disconnect+0x82/0x3b0 [rpcrdma] [ 864.069365] ? xprt_prepare_transmit+0x5d/0xc0 [sunrpc] [ 864.076386] xprt_rdma_close+0xe/0x30 [rpcrdma] [ 864.082593] xprt_autoclose+0x52/0x100 [sunrpc] [ 864.088718] process_one_work+0x1e8/0x3c0 [ 864.094170] worker_thread+0x50/0x3b0 [ 864.099109] ? rescuer_thread+0x370/0x370 [ 864.104473] kthread+0x149/0x170 [ 864.109022] ? set_kthread_struct+0x40/0x40 [ 864.114713] ret_from_fork+0x22/0x30 |
| CVE-2022-48693 | In the Linux kernel, the following vulnerability has been resolved: soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs In brcmstb_pm_probe(), there are two kinds of leak bugs: (1) we need to add of_node_put() when for_each__matching_node() breaks (2) we need to add iounmap() for each iomap in fail path |
| CVE-2022-48692 | In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: Set scmnd->result only when scmnd is not NULL This change fixes the following kernel NULL pointer dereference which is reproduced by blktests srp/007 occasionally. BUG: kernel NULL pointer dereference, address: 0000000000000170 PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 9 Comm: kworker/0:1H Kdump: loaded Not tainted 6.0.0-rc1+ #37 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-29-g6a62e0cb0dfe-prebuilt.qemu.org 04/01/2014 Workqueue: 0x0 (kblockd) RIP: 0010:srp_recv_done+0x176/0x500 [ib_srp] Code: 00 4d 85 ff 0f 84 52 02 00 00 48 c7 82 80 02 00 00 00 00 00 00 4c 89 df 4c 89 14 24 e8 53 d3 4a f6 4c 8b 14 24 41 0f b6 42 13 <41> 89 87 70 01 00 00 41 0f b6 52 12 f6 c2 02 74 44 41 8b 42 1c b9 RSP: 0018:ffffaef7c0003e28 EFLAGS: 00000282 RAX: 0000000000000000 RBX: ffff9bc9486dea60 RCX: 0000000000000000 RDX: 0000000000000102 RSI: ffffffffb76bbd0e RDI: 00000000ffffffff RBP: ffff9bc980099a00 R08: 0000000000000001 R09: 0000000000000001 R10: ffff9bca53ef0000 R11: ffff9bc980099a10 R12: ffff9bc956e14000 R13: ffff9bc9836b9cb0 R14: ffff9bc9557b4480 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9bc97ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000170 CR3: 0000000007e04000 CR4: 00000000000006f0 Call Trace: <IRQ> __ib_process_cq+0xb7/0x280 [ib_core] ib_poll_handler+0x2b/0x130 [ib_core] irq_poll_softirq+0x93/0x150 __do_softirq+0xee/0x4b8 irq_exit_rcu+0xf7/0x130 sysvec_apic_timer_interrupt+0x8e/0xc0 </IRQ> |
| CVE-2022-48691 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: clean up hook list when offload flags check fails splice back the hook list so nft_chain_release_hook() has a chance to release the hooks. BUG: memory leak unreferenced object 0xffff88810180b100 (size 96): comm "syz-executor133", pid 3619, jiffies 4294945714 (age 12.690s) hex dump (first 32 bytes): 28 64 23 02 81 88 ff ff 28 64 23 02 81 88 ff ff (d#.....(d#..... 90 a8 aa 83 ff ff ff ff 00 00 b5 0f 81 88 ff ff ................ backtrace: [<ffffffff83a8c59b>] kmalloc include/linux/slab.h:600 [inline] [<ffffffff83a8c59b>] nft_netdev_hook_alloc+0x3b/0xc0 net/netfilter/nf_tables_api.c:1901 [<ffffffff83a9239a>] nft_chain_parse_netdev net/netfilter/nf_tables_api.c:1998 [inline] [<ffffffff83a9239a>] nft_chain_parse_hook+0x33a/0x530 net/netfilter/nf_tables_api.c:2073 [<ffffffff83a9b14b>] nf_tables_addchain.constprop.0+0x10b/0x950 net/netfilter/nf_tables_api.c:2218 [<ffffffff83a9c41b>] nf_tables_newchain+0xa8b/0xc60 net/netfilter/nf_tables_api.c:2593 [<ffffffff83a3d6a6>] nfnetlink_rcv_batch+0xa46/0xd20 net/netfilter/nfnetlink.c:517 [<ffffffff83a3db79>] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:638 [inline] [<ffffffff83a3db79>] nfnetlink_rcv+0x1f9/0x220 net/netfilter/nfnetlink.c:656 [<ffffffff83a13b17>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] [<ffffffff83a13b17>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345 [<ffffffff83a13fd6>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921 [<ffffffff83865ab6>] sock_sendmsg_nosec net/socket.c:714 [inline] [<ffffffff83865ab6>] sock_sendmsg+0x56/0x80 net/socket.c:734 [<ffffffff8386601c>] ____sys_sendmsg+0x36c/0x390 net/socket.c:2482 [<ffffffff8386a918>] ___sys_sendmsg+0xa8/0x110 net/socket.c:2536 [<ffffffff8386aaa8>] __sys_sendmsg+0x88/0x100 net/socket.c:2565 [<ffffffff845e5955>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff845e5955>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| CVE-2022-48690 | In the Linux kernel, the following vulnerability has been resolved: ice: Fix DMA mappings leak Fix leak, when user changes ring parameters. During reallocation of RX buffers, new DMA mappings are created for those buffers. New buffers with different RX ring count should substitute older ones, but those buffers were freed in ice_vsi_cfg_rxq and reallocated again with ice_alloc_rx_buf. kfree on rx_buf caused leak of already mapped DMA. Reallocate ZC with xdp_buf struct, when BPF program loads. Reallocate back to rx_buf, when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XDP_SETUP_XSK_POOL handler. Steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done |
| CVE-2022-48689 | In the Linux kernel, the following vulnerability has been resolved: tcp: TX zerocopy should not sense pfmemalloc status We got a recent syzbot report [1] showing a possible misuse of pfmemalloc page status in TCP zerocopy paths. Indeed, for pages coming from user space or other layers, using page_is_pfmemalloc() is moot, and possibly could give false positives. There has been attempts to make page_is_pfmemalloc() more robust, but not using it in the first place in this context is probably better, removing cpu cycles. Note to stable teams : You need to backport 84ce071e38a6 ("net: introduce __skb_fill_page_desc_noacc") as a prereq. Race is more probable after commit c07aea3ef4d4 ("mm: add a signature in struct page") because page_is_pfmemalloc() is now using low order bit from page->lru.next, which can change more often than page->index. Low order bit should never be set for lru.next (when used as an anchor in LRU list), so KCSAN report is mostly a false positive. Backporting to older kernel versions seems not necessary. [1] BUG: KCSAN: data-race in lru_add_fn / tcp_build_frag write to 0xffffea0004a1d2c8 of 8 bytes by task 18600 on cpu 0: __list_add include/linux/list.h:73 [inline] list_add include/linux/list.h:88 [inline] lruvec_add_folio include/linux/mm_inline.h:105 [inline] lru_add_fn+0x440/0x520 mm/swap.c:228 folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246 folio_batch_add_and_move mm/swap.c:263 [inline] folio_add_lru+0xf1/0x140 mm/swap.c:490 filemap_add_folio+0xf8/0x150 mm/filemap.c:948 __filemap_get_folio+0x510/0x6d0 mm/filemap.c:1981 pagecache_get_page+0x26/0x190 mm/folio-compat.c:104 grab_cache_page_write_begin+0x2a/0x30 mm/folio-compat.c:116 ext4_da_write_begin+0x2dd/0x5f0 fs/ext4/inode.c:2988 generic_perform_write+0x1d4/0x3f0 mm/filemap.c:3738 ext4_buffered_write_iter+0x235/0x3e0 fs/ext4/file.c:270 ext4_file_write_iter+0x2e3/0x1210 call_write_iter include/linux/fs.h:2187 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x468/0x760 fs/read_write.c:578 ksys_write+0xe8/0x1a0 fs/read_write.c:631 __do_sys_write fs/read_write.c:643 [inline] __se_sys_write fs/read_write.c:640 [inline] __x64_sys_write+0x3e/0x50 fs/read_write.c:640 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffffea0004a1d2c8 of 8 bytes by task 18611 on cpu 1: page_is_pfmemalloc include/linux/mm.h:1740 [inline] __skb_fill_page_desc include/linux/skbuff.h:2422 [inline] skb_fill_page_desc include/linux/skbuff.h:2443 [inline] tcp_build_frag+0x613/0xb20 net/ipv4/tcp.c:1018 do_tcp_sendpages+0x3e8/0xaf0 net/ipv4/tcp.c:1075 tcp_sendpage_locked net/ipv4/tcp.c:1140 [inline] tcp_sendpage+0x89/0xb0 net/ipv4/tcp.c:1150 inet_sendpage+0x7f/0xc0 net/ipv4/af_inet.c:833 kernel_sendpage+0x184/0x300 net/socket.c:3561 sock_sendpage+0x5a/0x70 net/socket.c:1054 pipe_to_sendpage+0x128/0x160 fs/splice.c:361 splice_from_pipe_feed fs/splice.c:415 [inline] __splice_from_pipe+0x222/0x4d0 fs/splice.c:559 splice_from_pipe fs/splice.c:594 [inline] generic_splice_sendpage+0x89/0xc0 fs/splice.c:743 do_splice_from fs/splice.c:764 [inline] direct_splice_actor+0x80/0xa0 fs/splice.c:931 splice_direct_to_actor+0x305/0x620 fs/splice.c:886 do_splice_direct+0xfb/0x180 fs/splice.c:974 do_sendfile+0x3bf/0x910 fs/read_write.c:1249 __do_sys_sendfile64 fs/read_write.c:1317 [inline] __se_sys_sendfile64 fs/read_write.c:1303 [inline] __x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1303 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0xffffea0004a1d288 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 18611 Comm: syz-executor.4 Not tainted 6.0.0-rc2-syzkaller-00248-ge022620b5d05-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022 |
| CVE-2022-48688 | In the Linux kernel, the following vulnerability has been resolved: i40e: Fix kernel crash during module removal The driver incorrectly frees client instance and subsequent i40e module removal leads to kernel crash. Reproducer: 1. Do ethtool offline test followed immediately by another one host# ethtool -t eth0 offline; ethtool -t eth0 offline 2. Remove recursively irdma module that also removes i40e module host# modprobe -r irdma Result: [ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished [ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished [ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110 [ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2 [ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01 [ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1 [ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 8687.768755] #PF: supervisor read access in kernel mode [ 8687.773895] #PF: error_code(0x0000) - not-present page [ 8687.779034] PGD 0 P4D 0 [ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G W I 5.19.0+ #2 [ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019 [ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e] [ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b [ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202 [ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000 [ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000 [ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000 [ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0 [ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008 [ 8687.870342] FS: 00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000 [ 8687.878427] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0 [ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8687.905572] PKRU: 55555554 [ 8687.908286] Call Trace: [ 8687.910737] <TASK> [ 8687.912843] i40e_remove+0x2c0/0x330 [i40e] [ 8687.917040] pci_device_remove+0x33/0xa0 [ 8687.920962] device_release_driver_internal+0x1aa/0x230 [ 8687.926188] driver_detach+0x44/0x90 [ 8687.929770] bus_remove_driver+0x55/0xe0 [ 8687.933693] pci_unregister_driver+0x2a/0xb0 [ 8687.937967] i40e_exit_module+0xc/0xf48 [i40e] Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this failure is indicated back to i40e_client_subtask() that calls i40e_client_del_instance() to free client instance referenced by pf->cinst and sets this pointer to NULL. During the module removal i40e_remove() calls i40e_lan_del_device() that dereferences pf->cinst that is NULL -> crash. Do not remove client instance when client open callbacks fails and just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs to take care about this situation (when netdev is up and client is NOT opened) in i40e_notify_client_of_netdev_close() and calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED is set. |
| CVE-2022-48687 | In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix out-of-bounds read when setting HMAC data. The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 #1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>, family=<optimized out>) at net/netlink/genetlink.c:731 #2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775 #3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 #4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>) at net/netlink/af_netlink.c:2501 #5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 #6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 #7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>) at net/netlink/af_netlink.c:1345 #8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET. |
| CVE-2022-48686 | In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix UAF when detecting digest errors We should also bail from the io_work loop when we set rd_enabled to true, so we don't attempt to read data from the socket when the TCP stream is already out-of-sync or corrupted. |
| CVE-2022-48675 | In the Linux kernel, the following vulnerability has been resolved: IB/core: Fix a nested dead lock as part of ODP flow Fix a nested dead lock as part of ODP flow by using mmput_async(). From the below call trace [1] can see that calling mmput() once we have the umem_odp->umem_mutex locked as required by ib_umem_odp_map_dma_and_lock() might trigger in the same task the exit_mmap()->__mmu_notifier_release()->mlx5_ib_invalidate_range() which may dead lock when trying to lock the same mutex. Moving to use mmput_async() will solve the problem as the above exit_mmap() flow will be called in other task and will be executed once the lock will be available. [1] [64843.077665] task:kworker/u133:2 state:D stack: 0 pid:80906 ppid: 2 flags:0x00004000 [64843.077672] Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib] [64843.077719] Call Trace: [64843.077722] <TASK> [64843.077724] __schedule+0x23d/0x590 [64843.077729] schedule+0x4e/0xb0 [64843.077735] schedule_preempt_disabled+0xe/0x10 [64843.077740] __mutex_lock.constprop.0+0x263/0x490 [64843.077747] __mutex_lock_slowpath+0x13/0x20 [64843.077752] mutex_lock+0x34/0x40 [64843.077758] mlx5_ib_invalidate_range+0x48/0x270 [mlx5_ib] [64843.077808] __mmu_notifier_release+0x1a4/0x200 [64843.077816] exit_mmap+0x1bc/0x200 [64843.077822] ? walk_page_range+0x9c/0x120 [64843.077828] ? __cond_resched+0x1a/0x50 [64843.077833] ? mutex_lock+0x13/0x40 [64843.077839] ? uprobe_clear_state+0xac/0x120 [64843.077860] mmput+0x5f/0x140 [64843.077867] ib_umem_odp_map_dma_and_lock+0x21b/0x580 [ib_core] [64843.077931] pagefault_real_mr+0x9a/0x140 [mlx5_ib] [64843.077962] pagefault_mr+0xb4/0x550 [mlx5_ib] [64843.077992] pagefault_single_data_segment.constprop.0+0x2ac/0x560 [mlx5_ib] [64843.078022] mlx5_ib_eqe_pf_action+0x528/0x780 [mlx5_ib] [64843.078051] process_one_work+0x22b/0x3d0 [64843.078059] worker_thread+0x53/0x410 [64843.078065] ? process_one_work+0x3d0/0x3d0 [64843.078073] kthread+0x12a/0x150 [64843.078079] ? set_kthread_struct+0x50/0x50 [64843.078085] ret_from_fork+0x22/0x30 [64843.078093] </TASK> |
| CVE-2022-48674 | In the Linux kernel, the following vulnerability has been resolved: erofs: fix pcluster use-after-free on UP platforms During stress testing with CONFIG_SMP disabled, KASAN reports as below: ================================================================== BUG: KASAN: use-after-free in __mutex_lock+0xe5/0xc30 Read of size 8 at addr ffff8881094223f8 by task stress/7789 CPU: 0 PID: 7789 Comm: stress Not tainted 6.0.0-rc1-00002-g0d53d2e882f9 #3 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: <TASK> .. __mutex_lock+0xe5/0xc30 .. z_erofs_do_read_page+0x8ce/0x1560 .. z_erofs_readahead+0x31c/0x580 .. Freed by task 7787 kasan_save_stack+0x1e/0x40 kasan_set_track+0x20/0x30 kasan_set_free_info+0x20/0x40 __kasan_slab_free+0x10c/0x190 kmem_cache_free+0xed/0x380 rcu_core+0x3d5/0xc90 __do_softirq+0x12d/0x389 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x97/0xb0 call_rcu+0x3d/0x3f0 erofs_shrink_workstation+0x11f/0x210 erofs_shrink_scan+0xdc/0x170 shrink_slab.constprop.0+0x296/0x530 drop_slab+0x1c/0x70 drop_caches_sysctl_handler+0x70/0x80 proc_sys_call_handler+0x20a/0x2f0 vfs_write+0x555/0x6c0 ksys_write+0xbe/0x160 do_syscall_64+0x3b/0x90 The root cause is that erofs_workgroup_unfreeze() doesn't reset to orig_val thus it causes a race that the pcluster reuses unexpectedly before freeing. Since UP platforms are quite rare now, such path becomes unnecessary. Let's drop such specific-designed path directly instead. |
| CVE-2022-48673 | In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix possible access to freed memory in link clear After modifying the QP to the Error state, all RX WR would be completed with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not wait for it is done, but destroy the QP and free the link group directly. So there is a risk that accessing the freed memory in tasklet context. Here is a crash example: BUG: unable to handle page fault for address: ffffffff8f220860 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x30/0x40 mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib] smc_wr_rx_tasklet_fn+0x56/0xa0 [smc] tasklet_action_common.isra.21+0x66/0x100 __do_softirq+0xd5/0x29c asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x9d/0xa0 sysvec_call_function_single+0x34/0x80 asm_sysvec_call_function_single+0x12/0x20 |
| CVE-2022-48672 | In the Linux kernel, the following vulnerability has been resolved: of: fdt: fix off-by-one error in unflatten_dt_nodes() Commit 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree") forgot to fix up the depth check in the loop body in unflatten_dt_nodes() which makes it possible to overflow the nps[] buffer... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. |
| CVE-2022-48671 | In the Linux kernel, the following vulnerability has been resolved: cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all() syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at cpuset_attach() [1], for commit 4f7e7236435ca0ab ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that cpuset_attach() is also called from cgroup_attach_task_all(). Add cpus_read_lock() like what cgroup_procs_write_start() does. |
| CVE-2022-48670 | In the Linux kernel, the following vulnerability has been resolved: peci: cpu: Fix use-after-free in adev_release() When auxiliary_device_add() returns an error, auxiliary_device_uninit() is called, which causes refcount for device to be decremented and .release callback will be triggered. Because adev_release() re-calls auxiliary_device_uninit(), it will cause use-after-free: [ 1269.455172] WARNING: CPU: 0 PID: 14267 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15 [ 1269.464007] refcount_t: underflow; use-after-free. |
| CVE-2022-48669 | In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Fix potential memleak in papr_get_attr() `buf` is allocated in papr_get_attr(), and krealloc() of `buf` could fail. We need to free the original `buf` in the case of failure. |
| CVE-2022-48668 | In the Linux kernel, the following vulnerability has been resolved: smb3: fix temporary data corruption in collapse range collapse range doesn't discard the affected cached region so can risk temporarily corrupting the file data. This fixes xfstest generic/031 I also decided to merge a minor cleanup to this into the same patch (avoiding rereading inode size repeatedly unnecessarily) to make it clearer. |
| CVE-2022-48667 | In the Linux kernel, the following vulnerability has been resolved: smb3: fix temporary data corruption in insert range insert range doesn't discard the affected cached region so can risk temporarily corrupting file data. Also includes some minor cleanup (avoiding rereading inode size repeatedly unnecessarily) to make it clearer. |
| CVE-2022-48666 | In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix a use-after-free There are two .exit_cmd_priv implementations. Both implementations use resources associated with the SCSI host. Make sure that these resources are still available when .exit_cmd_priv is called by waiting inside scsi_remove_host() until the tag set has been freed. This commit fixes the following use-after-free: ================================================================== BUG: KASAN: use-after-free in srp_exit_cmd_priv+0x27/0xd0 [ib_srp] Read of size 8 at addr ffff888100337000 by task multipathd/16727 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x5e/0x5db kasan_report+0xab/0x120 srp_exit_cmd_priv+0x27/0xd0 [ib_srp] scsi_mq_exit_request+0x4d/0x70 blk_mq_free_rqs+0x143/0x410 __blk_mq_free_map_and_rqs+0x6e/0x100 blk_mq_free_tag_set+0x2b/0x160 scsi_host_dev_release+0xf3/0x1a0 device_release+0x54/0xe0 kobject_put+0xa5/0x120 device_release+0x54/0xe0 kobject_put+0xa5/0x120 scsi_device_dev_release_usercontext+0x4c1/0x4e0 execute_in_process_context+0x23/0x90 device_release+0x54/0xe0 kobject_put+0xa5/0x120 scsi_disk_release+0x3f/0x50 device_release+0x54/0xe0 kobject_put+0xa5/0x120 disk_release+0x17f/0x1b0 device_release+0x54/0xe0 kobject_put+0xa5/0x120 dm_put_table_device+0xa3/0x160 [dm_mod] dm_put_device+0xd0/0x140 [dm_mod] free_priority_group+0xd8/0x110 [dm_multipath] free_multipath+0x94/0xe0 [dm_multipath] dm_table_destroy+0xa2/0x1e0 [dm_mod] __dm_destroy+0x196/0x350 [dm_mod] dev_remove+0x10c/0x160 [dm_mod] ctl_ioctl+0x2c2/0x590 [dm_mod] dm_ctl_ioctl+0x5/0x10 [dm_mod] __x64_sys_ioctl+0xb4/0xf0 dm_ctl_ioctl+0x5/0x10 [dm_mod] __x64_sys_ioctl+0xb4/0xf0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
| CVE-2022-48665 | In the Linux kernel, the following vulnerability has been resolved: exfat: fix overflow for large capacity partition Using int type for sector index, there will be overflow in a large capacity partition. For example, if storage with sector size of 512 bytes and partition capacity is larger than 2TB, there will be overflow. |
| CVE-2022-48664 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix hang during unmount when stopping a space reclaim worker Often when running generic/562 from fstests we can hang during unmount, resulting in a trace like this: Sep 07 11:52:00 debian9 unknown: run fstests generic/562 at 2022-09-07 11:52:00 Sep 07 11:55:32 debian9 kernel: INFO: task umount:49438 blocked for more than 120 seconds. Sep 07 11:55:32 debian9 kernel: Not tainted 6.0.0-rc2-btrfs-next-122 #1 Sep 07 11:55:32 debian9 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Sep 07 11:55:32 debian9 kernel: task:umount state:D stack: 0 pid:49438 ppid: 25683 flags:0x00004000 Sep 07 11:55:32 debian9 kernel: Call Trace: Sep 07 11:55:32 debian9 kernel: <TASK> Sep 07 11:55:32 debian9 kernel: __schedule+0x3c8/0xec0 Sep 07 11:55:32 debian9 kernel: ? rcu_read_lock_sched_held+0x12/0x70 Sep 07 11:55:32 debian9 kernel: schedule+0x5d/0xf0 Sep 07 11:55:32 debian9 kernel: schedule_timeout+0xf1/0x130 Sep 07 11:55:32 debian9 kernel: ? lock_release+0x224/0x4a0 Sep 07 11:55:32 debian9 kernel: ? lock_acquired+0x1a0/0x420 Sep 07 11:55:32 debian9 kernel: ? trace_hardirqs_on+0x2c/0xd0 Sep 07 11:55:32 debian9 kernel: __wait_for_common+0xac/0x200 Sep 07 11:55:32 debian9 kernel: ? usleep_range_state+0xb0/0xb0 Sep 07 11:55:32 debian9 kernel: __flush_work+0x26d/0x530 Sep 07 11:55:32 debian9 kernel: ? flush_workqueue_prep_pwqs+0x140/0x140 Sep 07 11:55:32 debian9 kernel: ? trace_clock_local+0xc/0x30 Sep 07 11:55:32 debian9 kernel: __cancel_work_timer+0x11f/0x1b0 Sep 07 11:55:32 debian9 kernel: ? close_ctree+0x12b/0x5b3 [btrfs] Sep 07 11:55:32 debian9 kernel: ? __trace_bputs+0x10b/0x170 Sep 07 11:55:32 debian9 kernel: close_ctree+0x152/0x5b3 [btrfs] Sep 07 11:55:32 debian9 kernel: ? evict_inodes+0x166/0x1c0 Sep 07 11:55:32 debian9 kernel: generic_shutdown_super+0x71/0x120 Sep 07 11:55:32 debian9 kernel: kill_anon_super+0x14/0x30 Sep 07 11:55:32 debian9 kernel: btrfs_kill_super+0x12/0x20 [btrfs] Sep 07 11:55:32 debian9 kernel: deactivate_locked_super+0x2e/0xa0 Sep 07 11:55:32 debian9 kernel: cleanup_mnt+0x100/0x160 Sep 07 11:55:32 debian9 kernel: task_work_run+0x59/0xa0 Sep 07 11:55:32 debian9 kernel: exit_to_user_mode_prepare+0x1a6/0x1b0 Sep 07 11:55:32 debian9 kernel: syscall_exit_to_user_mode+0x16/0x40 Sep 07 11:55:32 debian9 kernel: do_syscall_64+0x48/0x90 Sep 07 11:55:32 debian9 kernel: entry_SYSCALL_64_after_hwframe+0x63/0xcd Sep 07 11:55:32 debian9 kernel: RIP: 0033:0x7fcde59a57a7 Sep 07 11:55:32 debian9 kernel: RSP: 002b:00007ffe914217c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 Sep 07 11:55:32 debian9 kernel: RAX: 0000000000000000 RBX: 00007fcde5ae8264 RCX: 00007fcde59a57a7 Sep 07 11:55:32 debian9 kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000055b57556cdd0 Sep 07 11:55:32 debian9 kernel: RBP: 000055b57556cba0 R08: 0000000000000000 R09: 00007ffe91420570 Sep 07 11:55:32 debian9 kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 Sep 07 11:55:32 debian9 kernel: R13: 000055b57556cdd0 R14: 000055b57556ccb8 R15: 0000000000000000 Sep 07 11:55:32 debian9 kernel: </TASK> What happens is the following: 1) The cleaner kthread tries to start a transaction to delete an unused block group, but the metadata reservation can not be satisfied right away, so a reservation ticket is created and it starts the async metadata reclaim task (fs_info->async_reclaim_work); 2) Writeback for all the filler inodes with an i_size of 2K starts (generic/562 creates a lot of 2K files with the goal of filling metadata space). We try to create an inline extent for them, but we fail when trying to insert the inline extent with -ENOSPC (at cow_file_range_inline()) - since this is not critical, we fallback to non-inline mode (back to cow_file_range()), reserve extents ---truncated--- |
| CVE-2022-48663 | In the Linux kernel, the following vulnerability has been resolved: gpio: mockup: fix NULL pointer dereference when removing debugfs We now remove the device's debugfs entries when unbinding the driver. This now causes a NULL-pointer dereference on module exit because the platform devices are unregistered *after* the global debugfs directory has been recursively removed. Fix it by unregistering the devices first. |
| CVE-2022-48662 | In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Really move i915_gem_context.link under ref protection i915_perf assumes that it can use the i915_gem_context reference to protect its i915->gem.contexts.list iteration. However, this requires that we do not remove the context from the list until after we drop the final reference and release the struct. If, as currently, we remove the context from the list during context_close(), the link.next pointer may be poisoned while we are holding the context reference and cause a GPF: [ 4070.573157] i915 0000:00:02.0: [drm:i915_perf_open_ioctl [i915]] filtering on ctx_id=0x1fffff ctx_id_mask=0x1fffff [ 4070.574881] general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP [ 4070.574897] CPU: 1 PID: 284392 Comm: amd_performance Tainted: G E 5.17.9 #180 [ 4070.574903] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017 [ 4070.574907] RIP: 0010:oa_configure_all_contexts.isra.0+0x222/0x350 [i915] [ 4070.574982] Code: 08 e8 32 6e 10 e1 4d 8b 6d 50 b8 ff ff ff ff 49 83 ed 50 f0 41 0f c1 04 24 83 f8 01 0f 84 e3 00 00 00 85 c0 0f 8e fa 00 00 00 <49> 8b 45 50 48 8d 70 b0 49 8d 45 50 48 39 44 24 10 0f 85 34 fe ff [ 4070.574990] RSP: 0018:ffffc90002077b78 EFLAGS: 00010202 [ 4070.574995] RAX: 0000000000000002 RBX: 0000000000000002 RCX: 0000000000000000 [ 4070.575000] RDX: 0000000000000001 RSI: ffffc90002077b20 RDI: ffff88810ddc7c68 [ 4070.575004] RBP: 0000000000000001 R08: ffff888103242648 R09: fffffffffffffffc [ 4070.575008] R10: ffffffff82c50bc0 R11: 0000000000025c80 R12: ffff888101bf1860 [ 4070.575012] R13: dead0000000000b0 R14: ffffc90002077c04 R15: ffff88810be5cabc [ 4070.575016] FS: 00007f1ed50c0780(0000) GS:ffff88885ec80000(0000) knlGS:0000000000000000 [ 4070.575021] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4070.575025] CR2: 00007f1ed5590280 CR3: 000000010ef6f005 CR4: 00000000003706e0 [ 4070.575029] Call Trace: [ 4070.575033] <TASK> [ 4070.575037] lrc_configure_all_contexts+0x13e/0x150 [i915] [ 4070.575103] gen8_enable_metric_set+0x4d/0x90 [i915] [ 4070.575164] i915_perf_open_ioctl+0xbc0/0x1500 [i915] [ 4070.575224] ? asm_common_interrupt+0x1e/0x40 [ 4070.575232] ? i915_oa_init_reg_state+0x110/0x110 [i915] [ 4070.575290] drm_ioctl_kernel+0x85/0x110 [ 4070.575296] ? update_load_avg+0x5f/0x5e0 [ 4070.575302] drm_ioctl+0x1d3/0x370 [ 4070.575307] ? i915_oa_init_reg_state+0x110/0x110 [i915] [ 4070.575382] ? gen8_gt_irq_handler+0x46/0x130 [i915] [ 4070.575445] __x64_sys_ioctl+0x3c4/0x8d0 [ 4070.575451] ? __do_softirq+0xaa/0x1d2 [ 4070.575456] do_syscall_64+0x35/0x80 [ 4070.575461] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 4070.575467] RIP: 0033:0x7f1ed5c10397 [ 4070.575471] Code: 3c 1c e8 1c ff ff ff 85 c0 79 87 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a9 da 0d 00 f7 d8 64 89 01 48 [ 4070.575478] RSP: 002b:00007ffd65c8d7a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 4070.575484] RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f1ed5c10397 [ 4070.575488] RDX: 00007ffd65c8d7c0 RSI: 0000000040106476 RDI: 0000000000000006 [ 4070.575492] RBP: 00005620972f9c60 R08: 000000000000000a R09: 0000000000000005 [ 4070.575496] R10: 000000000000000d R11: 0000000000000246 R12: 000000000000000a [ 4070.575500] R13: 000000000000000d R14: 0000000000000000 R15: 00007ffd65c8d7c0 [ 4070.575505] </TASK> [ 4070.575507] Modules linked in: nls_ascii(E) nls_cp437(E) vfat(E) fat(E) i915(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) aesni_intel(E) crypto_simd(E) intel_gtt(E) cryptd(E) ttm(E) rapl(E) intel_cstate(E) drm_kms_helper(E) cfbfillrect(E) syscopyarea(E) cfbimgblt(E) intel_uncore(E) sysfillrect(E) mei_me(E) sysimgblt(E) i2c_i801(E) fb_sys_fops(E) mei(E) intel_pch_thermal(E) i2c_smbus ---truncated--- |
| CVE-2022-48661 | In the Linux kernel, the following vulnerability has been resolved: gpio: mockup: Fix potential resource leakage when register a chip If creation of software node fails, the locally allocated string array is left unfreed. Free it on error path. |
| CVE-2022-48660 | In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: Set lineevent_state::irq after IRQ register successfully When running gpio test on nxp-ls1028 platform with below command gpiomon --num-events=3 --rising-edge gpiochip1 25 There will be a warning trace as below: Call trace: free_irq+0x204/0x360 lineevent_free+0x64/0x70 gpio_ioctl+0x598/0x6a0 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x5c/0x130 ...... el0t_64_sync+0x1a0/0x1a4 The reason of this issue is that calling request_threaded_irq() function failed, and then lineevent_free() is invoked to release the resource. Since the lineevent_state::irq was already set, so the subsequent invocation of free_irq() would trigger the above warning call trace. To fix this issue, set the lineevent_state::irq after the IRQ register successfully. |
| CVE-2022-48659 | In the Linux kernel, the following vulnerability has been resolved: mm/slub: fix to return errno if kmalloc() fails In create_unique_id(), kmalloc(, GFP_KERNEL) can fail due to out-of-memory, if it fails, return errno correctly rather than triggering panic via BUG_ON(); kernel BUG at mm/slub.c:5893! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Call trace: sysfs_slab_add+0x258/0x260 mm/slub.c:5973 __kmem_cache_create+0x60/0x118 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x19c/0x31c mm/slab_common.c:335 kmem_cache_create+0x1c/0x28 mm/slab_common.c:390 f2fs_kmem_cache_create fs/f2fs/f2fs.h:2766 [inline] f2fs_init_xattr_caches+0x78/0xb4 fs/f2fs/xattr.c:808 f2fs_fill_super+0x1050/0x1e0c fs/f2fs/super.c:4149 mount_bdev+0x1b8/0x210 fs/super.c:1400 f2fs_mount+0x44/0x58 fs/f2fs/super.c:4512 legacy_get_tree+0x30/0x74 fs/fs_context.c:610 vfs_get_tree+0x40/0x140 fs/super.c:1530 do_new_mount+0x1dc/0x4e4 fs/namespace.c:3040 path_mount+0x358/0x914 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __arm64_sys_mount+0x2f8/0x408 fs/namespace.c:3568 |
| CVE-2022-48658 | In the Linux kernel, the following vulnerability has been resolved: mm: slub: fix flush_cpu_slab()/__free_slab() invocations in task context. Commit 5a836bf6b09f ("mm: slub: move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context") moved all flush_cpu_slab() invocations to the global workqueue to avoid a problem related with deactivate_slab()/__free_slab() being called from an IRQ context on PREEMPT_RT kernels. When the flush_all_cpu_locked() function is called from a task context it may happen that a workqueue with WQ_MEM_RECLAIM bit set ends up flushing the global workqueue, this will cause a dependency issue. workqueue: WQ_MEM_RECLAIM nvme-delete-wq:nvme_delete_ctrl_work [nvme_core] is flushing !WQ_MEM_RECLAIM events:flush_cpu_slab WARNING: CPU: 37 PID: 410 at kernel/workqueue.c:2637 check_flush_dependency+0x10a/0x120 Workqueue: nvme-delete-wq nvme_delete_ctrl_work [nvme_core] RIP: 0010:check_flush_dependency+0x10a/0x120[ 453.262125] Call Trace: __flush_work.isra.0+0xbf/0x220 ? __queue_work+0x1dc/0x420 flush_all_cpus_locked+0xfb/0x120 __kmem_cache_shutdown+0x2b/0x320 kmem_cache_destroy+0x49/0x100 bioset_exit+0x143/0x190 blk_release_queue+0xb9/0x100 kobject_cleanup+0x37/0x130 nvme_fc_ctrl_free+0xc6/0x150 [nvme_fc] nvme_free_ctrl+0x1ac/0x2b0 [nvme_core] Fix this bug by creating a workqueue for the flush operation with the WQ_MEM_RECLAIM bit set. |
| CVE-2022-48657 | In the Linux kernel, the following vulnerability has been resolved: arm64: topology: fix possible overflow in amu_fie_setup() cpufreq_get_hw_max_freq() returns max frequency in kHz as *unsigned int*, while freq_inv_set_max_ratio() gets passed this frequency in Hz as 'u64'. Multiplying max frequency by 1000 can potentially result in overflow -- multiplying by 1000ULL instead should avoid that... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. |
| CVE-2022-48656 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-private: Fix refcount leak bug in of_xudma_dev_get() We should call of_node_put() for the reference returned by of_parse_phandle() in fail path or when it is not used anymore. Here we only need to move the of_node_put() before the check. |
| CVE-2022-48655 | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Harden accesses to the reset domains Accessing reset domains descriptors by the index upon the SCMI drivers requests through the SCMI reset operations interface can potentially lead to out-of-bound violations if the SCMI driver misbehave. Add an internal consistency check before any such domains descriptors accesses. |
| CVE-2022-48654 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix possible bogus match in nf_osf_find() nf_osf_find() incorrectly returns true on mismatch, this leads to copying uninitialized memory area in nft_osf which can be used to leak stale kernel stack data to userspace. |
| CVE-2022-48653 | In the Linux kernel, the following vulnerability has been resolved: ice: Don't double unplug aux on peer initiated reset In the IDC callback that is accessed when the aux drivers request a reset, the function to unplug the aux devices is called. This function is also called in the ice_prepare_for_reset function. This double call is causing a "scheduling while atomic" BUG. [ 662.676430] ice 0000:4c:00.0 rocep76s0: cqp opcode = 0x1 maj_err_code = 0xffff min_err_code = 0x8003 [ 662.676609] ice 0000:4c:00.0 rocep76s0: [Modify QP Cmd Error][op_code=8] status=-29 waiting=1 completion_err=1 maj=0xffff min=0x8003 [ 662.815006] ice 0000:4c:00.0 rocep76s0: ICE OICR event notification: oicr = 0x10000003 [ 662.815014] ice 0000:4c:00.0 rocep76s0: critical PE Error, GLPE_CRITERR=0x00011424 [ 662.815017] ice 0000:4c:00.0 rocep76s0: Requesting a reset [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815477] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill 8021q garp mrp stp llc vfat fat rpcrdma intel_rapl_msr intel_rapl_common sunrpc i10nm_edac rdma_ucm nfit ib_srpt libnvdimm ib_isert iscsi_target_mod x86_pkg_temp_thermal intel_powerclamp coretemp target_core_mod snd_hda_intel ib_iser snd_intel_dspcfg libiscsi snd_intel_sdw_acpi scsi_transport_iscsi kvm_intel iTCO_wdt rdma_cm snd_hda_codec kvm iw_cm ipmi_ssif iTCO_vendor_support snd_hda_core irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hwdep snd_seq snd_seq_device rapl snd_pcm snd_timer isst_if_mbox_pci pcspkr isst_if_mmio irdma intel_uncore idxd acpi_ipmi joydev isst_if_common snd mei_me idxd_bus ipmi_si soundcore i2c_i801 mei ipmi_devintf i2c_smbus i2c_ismt ipmi_msghandler acpi_power_meter acpi_pad rv(OE) ib_uverbs ib_cm ib_core xfs libcrc32c ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm_ttm_helpe r ttm [ 662.815546] nvme nvme_core ice drm crc32c_intel i40e t10_pi wmi pinctrl_emmitsburg dm_mirror dm_region_hash dm_log dm_mod fuse [ 662.815557] Preemption disabled at: [ 662.815558] [<0000000000000000>] 0x0 [ 662.815563] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Tainted: G S OE 5.17.1 #2 [ 662.815566] Hardware name: Intel Corporation D50DNP/D50DNP, BIOS SE5C6301.86B.6624.D18.2111021741 11/02/2021 [ 662.815568] Call Trace: [ 662.815572] <IRQ> [ 662.815574] dump_stack_lvl+0x33/0x42 [ 662.815581] __schedule_bug.cold.147+0x7d/0x8a [ 662.815588] __schedule+0x798/0x990 [ 662.815595] schedule+0x44/0xc0 [ 662.815597] schedule_preempt_disabled+0x14/0x20 [ 662.815600] __mutex_lock.isra.11+0x46c/0x490 [ 662.815603] ? __ibdev_printk+0x76/0xc0 [ib_core] [ 662.815633] device_del+0x37/0x3d0 [ 662.815639] ice_unplug_aux_dev+0x1a/0x40 [ice] [ 662.815674] ice_schedule_reset+0x3c/0xd0 [ice] [ 662.815693] irdma_iidc_event_handler.cold.7+0xb6/0xd3 [irdma] [ 662.815712] ? bitmap_find_next_zero_area_off+0x45/0xa0 [ 662.815719] ice_send_event_to_aux+0x54/0x70 [ice] [ 662.815741] ice_misc_intr+0x21d/0x2d0 [ice] [ 662.815756] __handle_irq_event_percpu+0x4c/0x180 [ 662.815762] handle_irq_event_percpu+0xf/0x40 [ 662.815764] handle_irq_event+0x34/0x60 [ 662.815766] handle_edge_irq+0x9a/0x1c0 [ 662.815770] __common_interrupt+0x62/0x100 [ 662.815774] common_interrupt+0xb4/0xd0 [ 662.815779] </IRQ> [ 662.815780] <TASK> [ 662.815780] asm_common_interrupt+0x1e/0x40 [ 662.815785] RIP: 0010:cpuidle_enter_state+0xd6/0x380 [ 662.815789] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 65 d7 95 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 64 02 00 00 31 ff e8 ae c5 9c ff fb 45 85 f6 <0f> 88 12 01 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04 82 49 [ 662.815791] RSP: 0018:ff2c2c4f18edbe80 EFLAGS: 00000202 [ 662.815793] RAX: ff280805df140000 RBX: 0000000000000002 RCX: 000000000000001f [ 662.815795] RDX: 0000009a52da2d08 R ---truncated--- |
| CVE-2022-48652 | In the Linux kernel, the following vulnerability has been resolved: ice: Fix crash by keep old cfg when update TCs more than queues There are problems if allocated queues less than Traffic Classes. Commit a632b2a4c920 ("ice: ethtool: Prohibit improper channel config for DCB") already disallow setting less queues than TCs. Another case is if we first set less queues, and later update more TCs config due to LLDP, ice_vsi_cfg_tc() will failed but left dirty num_txq/rxq and tc_cfg in vsi, that will cause invalid pointer access. [ 95.968089] ice 0000:3b:00.1: More TCs defined than queues/rings allocated. [ 95.968092] ice 0000:3b:00.1: Trying to use more Rx queues (8), than were allocated (1)! [ 95.968093] ice 0000:3b:00.1: Failed to config TC for VSI index: 0 [ 95.969621] general protection fault: 0000 [#1] SMP NOPTI [ 95.969705] CPU: 1 PID: 58405 Comm: lldpad Kdump: loaded Tainted: G U W O --------- -t - 4.18.0 #1 [ 95.969867] Hardware name: O.E.M/BC11SPSCB10, BIOS 8.23 12/30/2021 [ 95.969992] RIP: 0010:devm_kmalloc+0xa/0x60 [ 95.970052] Code: 5c ff ff ff 31 c0 5b 5d 41 5c c3 b8 f4 ff ff ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 89 d1 <8b> 97 60 02 00 00 48 8d 7e 18 48 39 f7 72 3f 55 89 ce 53 48 8b 4c [ 95.970344] RSP: 0018:ffffc9003f553888 EFLAGS: 00010206 [ 95.970425] RAX: dead000000000200 RBX: ffffea003c425b00 RCX: 00000000006080c0 [ 95.970536] RDX: 00000000006080c0 RSI: 0000000000000200 RDI: dead000000000200 [ 95.970648] RBP: dead000000000200 R08: 00000000000463c0 R09: ffff888ffa900000 [ 95.970760] R10: 0000000000000000 R11: 0000000000000002 R12: ffff888ff6b40100 [ 95.970870] R13: ffff888ff6a55018 R14: 0000000000000000 R15: ffff888ff6a55460 [ 95.970981] FS: 00007f51b7d24700(0000) GS:ffff88903ee80000(0000) knlGS:0000000000000000 [ 95.971108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.971197] CR2: 00007fac5410d710 CR3: 0000000f2c1de002 CR4: 00000000007606e0 [ 95.971309] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 95.971419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 95.971530] PKRU: 55555554 [ 95.971573] Call Trace: [ 95.971622] ice_setup_rx_ring+0x39/0x110 [ice] [ 95.971695] ice_vsi_setup_rx_rings+0x54/0x90 [ice] [ 95.971774] ice_vsi_open+0x25/0x120 [ice] [ 95.971843] ice_open_internal+0xb8/0x1f0 [ice] [ 95.971919] ice_ena_vsi+0x4f/0xd0 [ice] [ 95.971987] ice_dcb_ena_dis_vsi.constprop.5+0x29/0x90 [ice] [ 95.972082] ice_pf_dcb_cfg+0x29a/0x380 [ice] [ 95.972154] ice_dcbnl_setets+0x174/0x1b0 [ice] [ 95.972220] dcbnl_ieee_set+0x89/0x230 [ 95.972279] ? dcbnl_ieee_del+0x150/0x150 [ 95.972341] dcb_doit+0x124/0x1b0 [ 95.972392] rtnetlink_rcv_msg+0x243/0x2f0 [ 95.972457] ? dcb_doit+0x14d/0x1b0 [ 95.972510] ? __kmalloc_node_track_caller+0x1d3/0x280 [ 95.972591] ? rtnl_calcit.isra.31+0x100/0x100 [ 95.972661] netlink_rcv_skb+0xcf/0xf0 [ 95.972720] netlink_unicast+0x16d/0x220 [ 95.972781] netlink_sendmsg+0x2ba/0x3a0 [ 95.975891] sock_sendmsg+0x4c/0x50 [ 95.979032] ___sys_sendmsg+0x2e4/0x300 [ 95.982147] ? kmem_cache_alloc+0x13e/0x190 [ 95.985242] ? __wake_up_common_lock+0x79/0x90 [ 95.988338] ? __check_object_size+0xac/0x1b0 [ 95.991440] ? _copy_to_user+0x22/0x30 [ 95.994539] ? move_addr_to_user+0xbb/0xd0 [ 95.997619] ? __sys_sendmsg+0x53/0x80 [ 96.000664] __sys_sendmsg+0x53/0x80 [ 96.003747] do_syscall_64+0x5b/0x1d0 [ 96.006862] entry_SYSCALL_64_after_hwframe+0x65/0xca Only update num_txq/rxq when passed check, and restore tc_cfg if setup queue map failed. |
| CVE-2022-48651 | In the Linux kernel, the following vulnerability has been resolved: ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header If an AF_PACKET socket is used to send packets through ipvlan and the default xmit function of the AF_PACKET socket is changed from dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and remains as the initial value of 65535, this may trigger slab-out-of-bounds bugs as following: ================================================================= UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 all Trace: print_address_description.constprop.0+0x1d/0x160 print_report.cold+0x4f/0x112 kasan_report+0xa3/0x130 ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] ipvlan_start_xmit+0x29/0xa0 [ipvlan] __dev_direct_xmit+0x2e2/0x380 packet_direct_xmit+0x22/0x60 packet_snd+0x7c9/0xc40 sock_sendmsg+0x9a/0xa0 __sys_sendto+0x18a/0x230 __x64_sys_sendto+0x74/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: 1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW and skb->protocol is not specified as in packet_parse_headers() 2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit() In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which use "skb->head + skb->mac_header", out-of-bound access occurs. This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2() and reset mac header in multicast to solve this out-of-bound bug. |
| CVE-2022-48650 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix memory leak in __qlt_24xx_handle_abts() Commit 8f394da36a36 ("scsi: qla2xxx: Drop TARGET_SCF_LOOKUP_LUN_FROM_TAG") made the __qlt_24xx_handle_abts() function return early if tcm_qla2xxx_find_cmd_by_tag() didn't find a command, but it missed to clean up the allocated memory for the management command. |
| CVE-2022-48649 | In the Linux kernel, the following vulnerability has been resolved: mm/slab_common: fix possible double free of kmem_cache When doing slub_debug test, kfence's 'test_memcache_typesafe_by_rcu' kunit test case cause a use-after-free error: BUG: KASAN: use-after-free in kobject_del+0x14/0x30 Read of size 8 at addr ffff888007679090 by task kunit_try_catch/261 CPU: 1 PID: 261 Comm: kunit_try_catch Tainted: G B N 6.0.0-rc5-next-20220916 #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_address_description.constprop.0+0x87/0x2a5 print_report+0x103/0x1ed kasan_report+0xb7/0x140 kobject_del+0x14/0x30 kmem_cache_destroy+0x130/0x170 test_exit+0x1a/0x30 kunit_try_run_case+0xad/0xc0 kunit_generic_run_threadfn_adapter+0x26/0x50 kthread+0x17b/0x1b0 </TASK> The cause is inside kmem_cache_destroy(): kmem_cache_destroy acquire lock/mutex shutdown_cache schedule_work(kmem_cache_release) (if RCU flag set) release lock/mutex kmem_cache_release (if RCU flag not set) In some certain timing, the scheduled work could be run before the next RCU flag checking, which can then get a wrong value and lead to double kmem_cache_release(). Fix it by caching the RCU flag inside protected area, just like 'refcnt' |
| CVE-2022-48648 | In the Linux kernel, the following vulnerability has been resolved: sfc: fix null pointer dereference in efx_hard_start_xmit Trying to get the channel from the tx_queue variable here is wrong because we can only be here if tx_queue is NULL, so we shouldn't dereference it. As the above comment in the code says, this is very unlikely to happen, but it's wrong anyway so let's fix it. I hit this issue because of a different bug that caused tx_queue to be NULL. If that happens, this is the error message that we get here: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [...] RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc] |
| CVE-2022-48647 | In the Linux kernel, the following vulnerability has been resolved: sfc: fix TX channel offset when using legacy interrupts In legacy interrupt mode the tx_channel_offset was hardcoded to 1, but that's not correct if efx_sepparate_tx_channels is false. In that case, the offset is 0 because the tx queues are in the single existing channel at index 0, together with the rx queue. Without this fix, as soon as you try to send any traffic, it tries to get the tx queues from an uninitialized channel getting these errors: WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/sfc/tx.c:540 efx_hard_start_xmit+0x12e/0x170 [sfc] [...] RIP: 0010:efx_hard_start_xmit+0x12e/0x170 [sfc] [...] Call Trace: <IRQ> dev_hard_start_xmit+0xd7/0x230 sch_direct_xmit+0x9f/0x360 __dev_queue_xmit+0x890/0xa40 [...] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [...] RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc] [...] Call Trace: <IRQ> dev_hard_start_xmit+0xd7/0x230 sch_direct_xmit+0x9f/0x360 __dev_queue_xmit+0x890/0xa40 [...] |
| CVE-2022-48646 | In the Linux kernel, the following vulnerability has been resolved: sfc/siena: fix null pointer dereference in efx_hard_start_xmit Like in previous patch for sfc, prevent potential (but unlikely) NULL pointer dereference. |
| CVE-2022-48645 | In the Linux kernel, the following vulnerability has been resolved: net: enetc: deny offload of tc-based TSN features on VF interfaces TSN features on the ENETC (taprio, cbs, gate, police) are configured through a mix of command BD ring messages and port registers: enetc_port_rd(), enetc_port_wr(). Port registers are a region of the ENETC memory map which are only accessible from the PCIe Physical Function. They are not accessible from the Virtual Functions. Moreover, attempting to access these registers crashes the kernel: $ echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/sriov_numvfs pci 0000:00:01.0: [1957:ef00] type 00 class 0x020001 fsl_enetc_vf 0000:00:01.0: Adding to iommu group 15 fsl_enetc_vf 0000:00:01.0: enabling device (0000 -> 0002) fsl_enetc_vf 0000:00:01.0 eno0vf0: renamed from eth0 $ tc qdisc replace dev eno0vf0 root taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \ sched-entry S 0x7f 900000 sched-entry S 0x80 100000 flags 0x2 Unable to handle kernel paging request at virtual address ffff800009551a08 Internal error: Oops: 96000007 [#1] PREEMPT SMP pc : enetc_setup_tc_taprio+0x170/0x47c lr : enetc_setup_tc_taprio+0x16c/0x47c Call trace: enetc_setup_tc_taprio+0x170/0x47c enetc_setup_tc+0x38/0x2dc taprio_change+0x43c/0x970 taprio_init+0x188/0x1e0 qdisc_create+0x114/0x470 tc_modify_qdisc+0x1fc/0x6c0 rtnetlink_rcv_msg+0x12c/0x390 Split enetc_setup_tc() into separate functions for the PF and for the VF drivers. Also remove enetc_qos.o from being included into enetc-vf.ko, since it serves absolutely no purpose there. |
| CVE-2022-48644 | In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: avoid disabling offload when it was never enabled In an incredibly strange API design decision, qdisc->destroy() gets called even if qdisc->init() never succeeded, not exclusively since commit 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation"), but apparently also earlier (in the case of qdisc_create_dflt()). The taprio qdisc does not fully acknowledge this when it attempts full offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS parsed from netlink (in taprio_change(), tail called from taprio_init()). But in taprio_destroy(), we call taprio_disable_offload(), and this determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags). But looking at the implementation of FULL_OFFLOAD_IS_ENABLED() (a bitwise check of bit 1 in q->flags), it is invalid to call this macro on q->flags when it contains TAPRIO_FLAGS_INVALID, because that is set to U32_MAX, and therefore FULL_OFFLOAD_IS_ENABLED() will return true on an invalid set of flags. As a result, it is possible to crash the kernel if user space forces an error between setting q->flags = TAPRIO_FLAGS_INVALID, and the calling of taprio_enable_offload(). This is because drivers do not expect the offload to be disabled when it was never enabled. The error that we force here is to attach taprio as a non-root qdisc, but instead as child of an mqprio root qdisc: $ tc qdisc add dev swp0 root handle 1: \ mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc qdisc replace dev swp0 parent 1:1 \ taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \ sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI Unable to handle kernel paging request at virtual address fffffffffffffff8 [fffffffffffffff8] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Call trace: taprio_dump+0x27c/0x310 vsc9959_port_setup_tc+0x1f4/0x460 felix_port_setup_tc+0x24/0x3c dsa_slave_setup_tc+0x54/0x27c taprio_disable_offload.isra.0+0x58/0xe0 taprio_destroy+0x80/0x104 qdisc_create+0x240/0x470 tc_modify_qdisc+0x1fc/0x6b0 rtnetlink_rcv_msg+0x12c/0x390 netlink_rcv_skb+0x5c/0x130 rtnetlink_rcv+0x1c/0x2c Fix this by keeping track of the operations we made, and undo the offload only if we actually did it. I've added "bool offloaded" inside a 4 byte hole between "int clockid" and "atomic64_t picos_per_byte". Now the first cache line looks like below: $ pahole -C taprio_sched net/sched/sch_taprio.o struct taprio_sched { struct Qdisc * * qdiscs; /* 0 8 */ struct Qdisc * root; /* 8 8 */ u32 flags; /* 16 4 */ enum tk_offsets tk_offset; /* 20 4 */ int clockid; /* 24 4 */ bool offloaded; /* 28 1 */ /* XXX 3 bytes hole, try to pack */ atomic64_t picos_per_byte; /* 32 0 */ /* XXX 8 bytes hole, try to pack */ spinlock_t current_entry_lock; /* 40 0 */ /* XXX 8 bytes hole, try to pack */ struct sched_entry * current_entry; /* 48 8 */ struct sched_gate_list * oper_sched; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ |
| CVE-2022-48643 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix nft_counters_enabled underflow at nf_tables_addchain() syzbot is reporting underflow of nft_counters_enabled counter at nf_tables_addchain() [1], for commit 43eb8949cfdffa76 ("netfilter: nf_tables: do not leave chain stats enabled on error") missed that nf_tables_chain_destroy() after nft_basechain_init() in the error path of nf_tables_addchain() decrements the counter because nft_basechain_init() makes nft_is_base_chain() return true by setting NFT_CHAIN_BASE flag. Increment the counter immediately after returning from nft_basechain_init(). |
| CVE-2022-48642 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain() It seems to me that percpu memory for chain stats started leaking since commit 3bc158f8d0330f0a ("netfilter: nf_tables: map basechain priority to hardware priority") when nft_chain_offload_priority() returned an error. |
| CVE-2022-48641 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: fix memory leak when blob is malformed The bug fix was incomplete, it "replaced" crash with a memory leak. The old code had an assignment to "ret" embedded into the conditional, restore this. |
| CVE-2022-48640 | In the Linux kernel, the following vulnerability has been resolved: bonding: fix NULL deref in bond_rr_gen_slave_id Fix a NULL dereference of the struct bonding.rr_tx_counter member because if a bond is initially created with an initial mode != zero (Round Robin) the memory required for the counter is never created and when the mode is changed there is never any attempt to verify the memory is allocated upon switching modes. This causes the following Oops on an aarch64 machine: [ 334.686773] Unable to handle kernel paging request at virtual address ffff2c91ac905000 [ 334.694703] Mem abort info: [ 334.697486] ESR = 0x0000000096000004 [ 334.701234] EC = 0x25: DABT (current EL), IL = 32 bits [ 334.706536] SET = 0, FnV = 0 [ 334.709579] EA = 0, S1PTW = 0 [ 334.712719] FSC = 0x04: level 0 translation fault [ 334.717586] Data abort info: [ 334.720454] ISV = 0, ISS = 0x00000004 [ 334.724288] CM = 0, WnR = 0 [ 334.727244] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000008044d662000 [ 334.733944] [ffff2c91ac905000] pgd=0000000000000000, p4d=0000000000000000 [ 334.740734] Internal error: Oops: 96000004 [#1] SMP [ 334.745602] Modules linked in: bonding tls veth rfkill sunrpc arm_spe_pmu vfat fat acpi_ipmi ipmi_ssif ixgbe igb i40e mdio ipmi_devintf ipmi_msghandler arm_cmn arm_dsu_pmu cppc_cpufreq acpi_tad fuse zram crct10dif_ce ast ghash_ce sbsa_gwdt nvme drm_vram_helper drm_ttm_helper nvme_core ttm xgene_hwmon [ 334.772217] CPU: 7 PID: 2214 Comm: ping Not tainted 6.0.0-rc4-00133-g64ae13ed4784 #4 [ 334.779950] Hardware name: GIGABYTE R272-P31-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021 [ 334.789244] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 334.796196] pc : bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.801691] lr : bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.807962] sp : ffff8000221733e0 [ 334.811265] x29: ffff8000221733e0 x28: ffffdbac8572d198 x27: ffff80002217357c [ 334.818392] x26: 000000000000002a x25: ffffdbacb33ee000 x24: ffff07ff980fa000 [ 334.825519] x23: ffffdbacb2e398ba x22: ffff07ff98102000 x21: ffff07ff981029c0 [ 334.832646] x20: 0000000000000001 x19: ffff07ff981029c0 x18: 0000000000000014 [ 334.839773] x17: 0000000000000000 x16: ffffdbacb1004364 x15: 0000aaaabe2f5a62 [ 334.846899] x14: ffff07ff8e55d968 x13: ffff07ff8e55db30 x12: 0000000000000000 [ 334.854026] x11: ffffdbacb21532e8 x10: 0000000000000001 x9 : ffffdbac857178ec [ 334.861153] x8 : ffff07ff9f6e5a28 x7 : 0000000000000000 x6 : 000000007c2b3742 [ 334.868279] x5 : ffff2c91ac905000 x4 : ffff2c91ac905000 x3 : ffff07ff9f554400 [ 334.875406] x2 : ffff2c91ac905000 x1 : 0000000000000001 x0 : ffff07ff981029c0 [ 334.882532] Call trace: [ 334.884967] bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.890109] bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.896033] __bond_start_xmit+0x128/0x3a0 [bonding] [ 334.901001] bond_start_xmit+0x54/0xb0 [bonding] [ 334.905622] dev_hard_start_xmit+0xb4/0x220 [ 334.909798] __dev_queue_xmit+0x1a0/0x720 [ 334.913799] arp_xmit+0x3c/0xbc [ 334.916932] arp_send_dst+0x98/0xd0 [ 334.920410] arp_solicit+0xe8/0x230 [ 334.923888] neigh_probe+0x60/0xb0 [ 334.927279] __neigh_event_send+0x3b0/0x470 [ 334.931453] neigh_resolve_output+0x70/0x90 [ 334.935626] ip_finish_output2+0x158/0x514 [ 334.939714] __ip_finish_output+0xac/0x1a4 [ 334.943800] ip_finish_output+0x40/0xfc [ 334.947626] ip_output+0xf8/0x1a4 [ 334.950931] ip_send_skb+0x5c/0x100 [ 334.954410] ip_push_pending_frames+0x3c/0x60 [ 334.958758] raw_sendmsg+0x458/0x6d0 [ 334.962325] inet_sendmsg+0x50/0x80 [ 334.965805] sock_sendmsg+0x60/0x6c [ 334.969286] __sys_sendto+0xc8/0x134 [ 334.972853] __arm64_sys_sendto+0x34/0x4c ---truncated--- |
| CVE-2022-48639 | In the Linux kernel, the following vulnerability has been resolved: net: sched: fix possible refcount leak in tc_new_tfilter() tfilter_put need to be called to put the refount got by tp->ops->get to avoid possible refcount leak when chain->tmplt_ops != NULL and chain->tmplt_ops != tp->ops. |
| CVE-2022-48638 | In the Linux kernel, the following vulnerability has been resolved: cgroup: cgroup_get_from_id() must check the looked-up kn is a directory cgroup has to be one kernfs dir, otherwise kernel panic is caused, especially cgroup id is provide from userspace. |
| CVE-2022-48637 | In the Linux kernel, the following vulnerability has been resolved: bnxt: prevent skb UAF after handing over to PTP worker When reading the timestamp is required bnxt_tx_int() hands over the ownership of the completed skb to the PTP worker. The skb should not be used afterwards, as the worker may run before the rest of our code and free the skb, leading to a use-after-free. Since dev_kfree_skb_any() accepts NULL make the loss of ownership more obvious and set skb to NULL. |
| CVE-2022-48636 | In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup pointer being NULL. The pavgroup pointer is checked on the entrance of the function but without the lcu->lock being held. Therefore there is a race window between dasd_alias_get_start_dev() and _lcu_update() which sets pavgroup to NULL with the lcu->lock held. Fix by checking the pavgroup pointer with lcu->lock held. |
| CVE-2022-48635 | In the Linux kernel, the following vulnerability has been resolved: fsdax: Fix infinite loop in dax_iomap_rw() I got an infinite loop and a WARNING report when executing a tail command in virtiofs. WARNING: CPU: 10 PID: 964 at fs/iomap/iter.c:34 iomap_iter+0x3a2/0x3d0 Modules linked in: CPU: 10 PID: 964 Comm: tail Not tainted 5.19.0-rc7 Call Trace: <TASK> dax_iomap_rw+0xea/0x620 ? __this_cpu_preempt_check+0x13/0x20 fuse_dax_read_iter+0x47/0x80 fuse_file_read_iter+0xae/0xd0 new_sync_read+0xfe/0x180 ? 0xffffffff81000000 vfs_read+0x14d/0x1a0 ksys_read+0x6d/0xf0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The tail command will call read() with a count of 0. In this case, iomap_iter() will report this WARNING, and always return 1 which casuing the infinite loop in dax_iomap_rw(). Fixing by checking count whether is 0 in dax_iomap_rw(). |
| CVE-2022-48634 | In the Linux kernel, the following vulnerability has been resolved: drm/gma500: Fix BUG: sleeping function called from invalid context errors gma_crtc_page_flip() was holding the event_lock spinlock while calling crtc_funcs->mode_set_base() which takes ww_mutex. The only reason to hold event_lock is to clear gma_crtc->page_flip_event on mode_set_base() errors. Instead unlock it after setting gma_crtc->page_flip_event and on errors re-take the lock and clear gma_crtc->page_flip_event it it is still set. This fixes the following WARN/stacktrace: [ 512.122953] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:870 [ 512.123004] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1253, name: gnome-shell [ 512.123031] preempt_count: 1, expected: 0 [ 512.123048] RCU nest depth: 0, expected: 0 [ 512.123066] INFO: lockdep is turned off. [ 512.123080] irq event stamp: 0 [ 512.123094] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 512.123134] hardirqs last disabled at (0): [<ffffffff8d0ec28c>] copy_process+0x9fc/0x1de0 [ 512.123176] softirqs last enabled at (0): [<ffffffff8d0ec28c>] copy_process+0x9fc/0x1de0 [ 512.123207] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 512.123233] Preemption disabled at: [ 512.123241] [<0000000000000000>] 0x0 [ 512.123275] CPU: 3 PID: 1253 Comm: gnome-shell Tainted: G W 5.19.0+ #1 [ 512.123304] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013 [ 512.123323] Call Trace: [ 512.123346] <TASK> [ 512.123370] dump_stack_lvl+0x5b/0x77 [ 512.123412] __might_resched.cold+0xff/0x13a [ 512.123458] ww_mutex_lock+0x1e/0xa0 [ 512.123495] psb_gem_pin+0x2c/0x150 [gma500_gfx] [ 512.123601] gma_pipe_set_base+0x76/0x240 [gma500_gfx] [ 512.123708] gma_crtc_page_flip+0x95/0x130 [gma500_gfx] [ 512.123808] drm_mode_page_flip_ioctl+0x57d/0x5d0 [ 512.123897] ? drm_mode_cursor2_ioctl+0x10/0x10 [ 512.123936] drm_ioctl_kernel+0xa1/0x150 [ 512.123984] drm_ioctl+0x21f/0x420 [ 512.124025] ? drm_mode_cursor2_ioctl+0x10/0x10 [ 512.124070] ? rcu_read_lock_bh_held+0xb/0x60 [ 512.124104] ? lock_release+0x1ef/0x2d0 [ 512.124161] __x64_sys_ioctl+0x8d/0xd0 [ 512.124203] do_syscall_64+0x58/0x80 [ 512.124239] ? do_syscall_64+0x67/0x80 [ 512.124267] ? trace_hardirqs_on_prepare+0x55/0xe0 [ 512.124300] ? do_syscall_64+0x67/0x80 [ 512.124340] ? rcu_read_lock_sched_held+0x10/0x80 [ 512.124377] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 512.124411] RIP: 0033:0x7fcc4a70740f [ 512.124442] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00 [ 512.124470] RSP: 002b:00007ffda73f5390 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 512.124503] RAX: ffffffffffffffda RBX: 000055cc9e474500 RCX: 00007fcc4a70740f [ 512.124524] RDX: 00007ffda73f5420 RSI: 00000000c01864b0 RDI: 0000000000000009 [ 512.124544] RBP: 00007ffda73f5420 R08: 000055cc9c0b0cb0 R09: 0000000000000034 [ 512.124564] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c01864b0 [ 512.124584] R13: 0000000000000009 R14: 000055cc9df484d0 R15: 000055cc9af5d0c0 [ 512.124647] </TASK> |
| CVE-2022-48633 | In the Linux kernel, the following vulnerability has been resolved: drm/gma500: Fix WARN_ON(lock->magic != lock) error psb_gem_unpin() calls dma_resv_lock() but the underlying ww_mutex gets destroyed by drm_gem_object_release() move the drm_gem_object_release() call in psb_gem_free_object() to after the unpin to fix the below warning: [ 79.693962] ------------[ cut here ]------------ [ 79.693992] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 79.694015] WARNING: CPU: 0 PID: 240 at kernel/locking/mutex.c:582 __ww_mutex_lock.constprop.0+0x569/0xfb0 [ 79.694052] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer qrtr bnep ath9k ath9k_common ath9k_hw snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel ath3k snd_intel_dspcfg mac80211 snd_intel_sdw_acpi btusb snd_hda_codec btrtl btbcm btintel btmtk bluetooth at24 snd_hda_core snd_hwdep uvcvideo snd_seq libarc4 videobuf2_vmalloc ath videobuf2_memops videobuf2_v4l2 videobuf2_common snd_seq_device videodev acer_wmi intel_powerclamp coretemp mc snd_pcm joydev sparse_keymap ecdh_generic pcspkr wmi_bmof cfg80211 i2c_i801 i2c_smbus snd_timer snd r8169 rfkill lpc_ich soundcore acpi_cpufreq zram rtsx_pci_sdmmc mmc_core serio_raw rtsx_pci gma500_gfx(E) video wmi ip6_tables ip_tables i2c_dev fuse [ 79.694436] CPU: 0 PID: 240 Comm: plymouthd Tainted: G W E 6.0.0-rc3+ #490 [ 79.694457] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013 [ 79.694469] RIP: 0010:__ww_mutex_lock.constprop.0+0x569/0xfb0 [ 79.694496] Code: ff 85 c0 0f 84 15 fb ff ff 8b 05 ca 3c 11 01 85 c0 0f 85 07 fb ff ff 48 c7 c6 30 cb 84 aa 48 c7 c7 a3 e1 82 aa e8 ac 29 f8 ff <0f> 0b e9 ed fa ff ff e8 5b 83 8a ff 85 c0 74 10 44 8b 0d 98 3c 11 [ 79.694513] RSP: 0018:ffffad1dc048bbe0 EFLAGS: 00010282 [ 79.694623] RAX: 0000000000000028 RBX: 0000000000000000 RCX: 0000000000000000 [ 79.694636] RDX: 0000000000000001 RSI: ffffffffaa8b0ffc RDI: 00000000ffffffff [ 79.694650] RBP: ffffad1dc048bc80 R08: 0000000000000000 R09: ffffad1dc048ba90 [ 79.694662] R10: 0000000000000003 R11: ffffffffaad62fe8 R12: ffff9ff302103138 [ 79.694675] R13: ffff9ff306ec8000 R14: ffff9ff307779078 R15: ffff9ff3014c0270 [ 79.694690] FS: 00007ff1cccf1740(0000) GS:ffff9ff3bc200000(0000) knlGS:0000000000000000 [ 79.694705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 79.694719] CR2: 0000559ecbcb4420 CR3: 0000000013210000 CR4: 00000000000006f0 [ 79.694734] Call Trace: [ 79.694749] <TASK> [ 79.694761] ? __schedule+0x47f/0x1670 [ 79.694796] ? psb_gem_unpin+0x27/0x1a0 [gma500_gfx] [ 79.694830] ? lock_is_held_type+0xe3/0x140 [ 79.694864] ? ww_mutex_lock+0x38/0xa0 [ 79.694885] ? __cond_resched+0x1c/0x30 [ 79.694902] ww_mutex_lock+0x38/0xa0 [ 79.694925] psb_gem_unpin+0x27/0x1a0 [gma500_gfx] [ 79.694964] psb_gem_unpin+0x199/0x1a0 [gma500_gfx] [ 79.694996] drm_gem_object_release_handle+0x50/0x60 [ 79.695020] ? drm_gem_object_handle_put_unlocked+0xf0/0xf0 [ 79.695042] idr_for_each+0x4b/0xb0 [ 79.695066] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 79.695095] drm_gem_release+0x1c/0x30 [ 79.695118] drm_file_free.part.0+0x1ea/0x260 [ 79.695150] drm_release+0x6a/0x120 [ 79.695175] __fput+0x9f/0x260 [ 79.695203] task_work_run+0x59/0xa0 [ 79.695227] do_exit+0x387/0xbe0 [ 79.695250] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 79.695275] ? lockdep_hardirqs_on+0x7d/0x100 [ 79.695304] do_group_exit+0x33/0xb0 [ 79.695331] __x64_sys_exit_group+0x14/0x20 [ 79.695353] do_syscall_64+0x58/0x80 [ 79.695376] ? up_read+0x17/0x20 [ 79.695401] ? lock_is_held_type+0xe3/0x140 [ 79.695429] ? asm_exc_page_fault+0x22/0x30 [ 79.695450] ? lockdep_hardirqs_on+0x7d/0x100 [ 79.695473] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 79.695493] RIP: 0033:0x7ff1ccefe3f1 [ 79.695516] Code: Unable to access opcode bytes at RIP 0x7ff1ccefe3c7. [ 79.695607] RSP: 002b:00007ffed4413378 EFLAGS: ---truncated--- |
| CVE-2022-48632 | In the Linux kernel, the following vulnerability has been resolved: i2c: mlxbf: prevent stack overflow in mlxbf_i2c_smbus_start_transaction() memcpy() is called in a loop while 'operation->length' upper bound is not checked and 'data_idx' also increments. |
| CVE-2022-48631 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug in extents parsing when eh_entries == 0 and eh_depth > 0 When walking through an inode extents, the ext4_ext_binsearch_idx() function assumes that the extent header has been previously validated. However, there are no checks that verify that the number of entries (eh->eh_entries) is non-zero when depth is > 0. And this will lead to problems because the EXT_FIRST_INDEX() and EXT_LAST_INDEX() will return garbage and result in this: [ 135.245946] ------------[ cut here ]------------ [ 135.247579] kernel BUG at fs/ext4/extents.c:2258! [ 135.249045] invalid opcode: 0000 [#1] PREEMPT SMP [ 135.250320] CPU: 2 PID: 238 Comm: tmp118 Not tainted 5.19.0-rc8+ #4 [ 135.252067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 135.255065] RIP: 0010:ext4_ext_map_blocks+0xc20/0xcb0 [ 135.256475] Code: [ 135.261433] RSP: 0018:ffffc900005939f8 EFLAGS: 00010246 [ 135.262847] RAX: 0000000000000024 RBX: ffffc90000593b70 RCX: 0000000000000023 [ 135.264765] RDX: ffff8880038e5f10 RSI: 0000000000000003 RDI: ffff8880046e922c [ 135.266670] RBP: ffff8880046e9348 R08: 0000000000000001 R09: ffff888002ca580c [ 135.268576] R10: 0000000000002602 R11: 0000000000000000 R12: 0000000000000024 [ 135.270477] R13: 0000000000000000 R14: 0000000000000024 R15: 0000000000000000 [ 135.272394] FS: 00007fdabdc56740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 [ 135.274510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 135.276075] CR2: 00007ffc26bd4f00 CR3: 0000000006261004 CR4: 0000000000170ea0 [ 135.277952] Call Trace: [ 135.278635] <TASK> [ 135.279247] ? preempt_count_add+0x6d/0xa0 [ 135.280358] ? percpu_counter_add_batch+0x55/0xb0 [ 135.281612] ? _raw_read_unlock+0x18/0x30 [ 135.282704] ext4_map_blocks+0x294/0x5a0 [ 135.283745] ? xa_load+0x6f/0xa0 [ 135.284562] ext4_mpage_readpages+0x3d6/0x770 [ 135.285646] read_pages+0x67/0x1d0 [ 135.286492] ? folio_add_lru+0x51/0x80 [ 135.287441] page_cache_ra_unbounded+0x124/0x170 [ 135.288510] filemap_get_pages+0x23d/0x5a0 [ 135.289457] ? path_openat+0xa72/0xdd0 [ 135.290332] filemap_read+0xbf/0x300 [ 135.291158] ? _raw_spin_lock_irqsave+0x17/0x40 [ 135.292192] new_sync_read+0x103/0x170 [ 135.293014] vfs_read+0x15d/0x180 [ 135.293745] ksys_read+0xa1/0xe0 [ 135.294461] do_syscall_64+0x3c/0x80 [ 135.295284] entry_SYSCALL_64_after_hwframe+0x46/0xb0 This patch simply adds an extra check in __ext4_ext_check(), verifying that eh_entries is not 0 when eh_depth is > 0. |
| CVE-2022-48630 | In the Linux kernel, the following vulnerability has been resolved: crypto: qcom-rng - fix infinite loop on requests not multiple of WORD_SZ The commit referenced in the Fixes tag removed the 'break' from the else branch in qcom_rng_read(), causing an infinite loop whenever 'max' is not a multiple of WORD_SZ. This can be reproduced e.g. by running: kcapi-rng -b 67 >/dev/null There are many ways to fix this without adding back the 'break', but they all seem more awkward than simply adding it back, so do just that. Tested on a machine with Qualcomm Amberwing processor. |
| CVE-2022-48629 | In the Linux kernel, the following vulnerability has been resolved: crypto: qcom-rng - ensure buffer for generate is completely filled The generate function in struct rng_alg expects that the destination buffer is completely filled if the function returns 0. qcom_rng_read() can run into a situation where the buffer is partially filled with randomness and the remaining part of the buffer is zeroed since qcom_rng_generate() doesn't check the return value. This issue can be reproduced by running the following from libkcapi: kcapi-rng -b 9000000 > OUTFILE The generated OUTFILE will have three huge sections that contain all zeros, and this is caused by the code where the test 'val & PRNG_STATUS_DATA_AVAIL' fails. Let's fix this issue by ensuring that qcom_rng_read() always returns with a full buffer if the function returns success. Let's also have qcom_rng_generate() return the correct value. Here's some statistics from the ent project (https://www.fourmilab.ch/random/) that shows information about the quality of the generated numbers: $ ent -c qcom-random-before Value Char Occurrences Fraction 0 606748 0.067416 1 33104 0.003678 2 33001 0.003667 ... 253 � 32883 0.003654 254 � 33035 0.003671 255 � 33239 0.003693 Total: 9000000 1.000000 Entropy = 7.811590 bits per byte. Optimum compression would reduce the size of this 9000000 byte file by 2 percent. Chi square distribution for 9000000 samples is 9329962.81, and randomly would exceed this value less than 0.01 percent of the times. Arithmetic mean value of data bytes is 119.3731 (127.5 = random). Monte Carlo value for Pi is 3.197293333 (error 1.77 percent). Serial correlation coefficient is 0.159130 (totally uncorrelated = 0.0). Without this patch, the results of the chi-square test is 0.01%, and the numbers are certainly not random according to ent's project page. The results improve with this patch: $ ent -c qcom-random-after Value Char Occurrences Fraction 0 35432 0.003937 1 35127 0.003903 2 35424 0.003936 ... 253 � 35201 0.003911 254 � 34835 0.003871 255 � 35368 0.003930 Total: 9000000 1.000000 Entropy = 7.999979 bits per byte. Optimum compression would reduce the size of this 9000000 byte file by 0 percent. Chi square distribution for 9000000 samples is 258.77, and randomly would exceed this value 42.24 percent of the times. Arithmetic mean value of data bytes is 127.5006 (127.5 = random). Monte Carlo value for Pi is 3.141277333 (error 0.01 percent). Serial correlation coefficient is 0.000468 (totally uncorrelated = 0.0). This change was tested on a Nexus 5 phone (msm8974 SoC). |
| CVE-2022-48628 | In the Linux kernel, the following vulnerability has been resolved: ceph: drop messages from MDS when unmounting When unmounting all the dirty buffers will be flushed and after the last osd request is finished the last reference of the i_count will be released. Then it will flush the dirty cap/snap to MDSs, and the unmounting won't wait the possible acks, which will ihold the inodes when updating the metadata locally but makes no sense any more, of this. This will make the evict_inodes() to skip these inodes. If encrypt is enabled the kernel generate a warning when removing the encrypt keys when the skipped inodes still hold the keyring: WARNING: CPU: 4 PID: 168846 at fs/crypto/keyring.c:242 fscrypt_destroy_keyring+0x7e/0xd0 CPU: 4 PID: 168846 Comm: umount Tainted: G S 6.1.0-rc5-ceph-g72ead199864c #1 Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015 RIP: 0010:fscrypt_destroy_keyring+0x7e/0xd0 RSP: 0018:ffffc9000b277e28 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff88810d52ac00 RCX: ffff88810b56aa00 RDX: 0000000080000000 RSI: ffffffff822f3a09 RDI: ffff888108f59000 RBP: ffff8881d394fb88 R08: 0000000000000028 R09: 0000000000000000 R10: 0000000000000001 R11: 11ff4fe6834fcd91 R12: ffff8881d394fc40 R13: ffff888108f59000 R14: ffff8881d394f800 R15: 0000000000000000 FS: 00007fd83f6f1080(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f918d417000 CR3: 000000017f89a005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> generic_shutdown_super+0x47/0x120 kill_anon_super+0x14/0x30 ceph_kill_sb+0x36/0x90 [ceph] deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x67/0xb0 exit_to_user_mode_prepare+0x23d/0x240 syscall_exit_to_user_mode+0x25/0x60 do_syscall_64+0x40/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd83dc39e9b Later the kernel will crash when iput() the inodes and dereferencing the "sb->s_master_keys", which has been released by the generic_shutdown_super(). |
| CVE-2022-48627 | In the Linux kernel, the following vulnerability has been resolved: vt: fix memory overlapping when deleting chars in the buffer A memory overlapping copy occurs when deleting a long line. This memory overlapping copy can cause data corruption when scr_memcpyw is optimized to memcpy because memcpy does not ensure its behavior if the destination buffer overlaps with the source buffer. The line buffer is not always broken, because the memcpy utilizes the hardware acceleration, whose result is not deterministic. Fix this problem by using replacing the scr_memcpyw with scr_memmovew. |
| CVE-2022-48626 | In the Linux kernel, the following vulnerability has been resolved: moxart: fix potential use-after-free on remove path It was reported that the mmc host structure could be accessed after it was freed in moxart_remove(), so fix this by saving the base register of the device and using it instead of the pointer dereference. |
| CVE-2022-48619 | An issue was discovered in drivers/input/input.c in the Linux kernel before 5.17.10. An attacker can cause a denial of service (panic) because input_set_capability mishandles the situation in which an event code falls outside of a bitmap. |
| CVE-2022-48502 | An issue was discovered in the Linux kernel before 6.2. The ntfs3 subsystem does not properly check for correctness during disk reads, leading to an out-of-bounds read in ntfs_set_ea in fs/ntfs3/xattr.c. |
| CVE-2022-48425 | In the Linux kernel through 6.2.7, fs/ntfs3/inode.c has an invalid kfree because it does not validate MFT flags before replaying logs. |
| CVE-2022-48424 | In the Linux kernel before 6.1.3, fs/ntfs3/inode.c does not validate the attribute name offset. An unhandled page fault may occur. |
| CVE-2022-48423 | In the Linux kernel before 6.1.3, fs/ntfs3/record.c does not validate resident attribute names. An out-of-bounds write may occur. |
| CVE-2022-4842 | A flaw NULL Pointer Dereference in the Linux kernel NTFS3 driver function attr_punch_hole() was found. A local user could use this flaw to crash the system. |
| CVE-2022-47946 | An issue was discovered in the Linux kernel 5.10.x before 5.10.155. A use-after-free in io_sqpoll_wait_sq in fs/io_uring.c allows an attacker to crash the kernel, resulting in denial of service. finish_wait can be skipped. An attack can occur in some situations by forking a process and then quickly terminating it. NOTE: later kernel versions, such as the 5.15 longterm series, substantially changed the implementation of io_sqpoll_wait_sq. |
| CVE-2022-47943 | An issue was discovered in ksmbd in the Linux kernel 5.15 through 5.19 before 5.19.2. There is an out-of-bounds read and OOPS for SMB2_WRITE, when there is a large length in the zero DataOffset case. |
| CVE-2022-47942 | An issue was discovered in ksmbd in the Linux kernel 5.15 through 5.19 before 5.19.2. There is a heap-based buffer overflow in set_ntacl_dacl, related to use of SMB2_QUERY_INFO_HE after a malformed SMB2_SET_INFO_HE command. |
| CVE-2022-47941 | An issue was discovered in ksmbd in the Linux kernel 5.15 through 5.19 before 5.19.2. fs/ksmbd/smb2pdu.c omits a kfree call in certain smb2_handle_negotiate error conditions, aka a memory leak. |
| CVE-2022-47940 | An issue was discovered in ksmbd in the Linux kernel 5.15 through 5.18 before 5.18.18. fs/ksmbd/smb2pdu.c lacks length validation in the non-padding case in smb2_write. |
| CVE-2022-47939 | An issue was discovered in ksmbd in the Linux kernel 5.15 through 5.19 before 5.19.2. fs/ksmbd/smb2pdu.c has a use-after-free and OOPS for SMB2_TREE_DISCONNECT. |
| CVE-2022-47938 | An issue was discovered in ksmbd in the Linux kernel 5.15 through 5.19 before 5.19.2. fs/ksmbd/smb2misc.c has an out-of-bounds read and OOPS for SMB2_TREE_CONNECT. |
| CVE-2022-47929 | In the Linux kernel before 6.1.6, a NULL pointer dereference bug in the traffic control subsystem allows an unprivileged user to trigger a denial of service (system crash) via a crafted traffic control configuration that is set up with "tc qdisc" and "tc class" commands. This affects qdisc_graft in net/sched/sch_api.c. |
| CVE-2022-47521 | An issue was discovered in the Linux kernel before 6.0.11. Missing validation of IEEE80211_P2P_ATTR_CHANNEL_LIST in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger a heap-based buffer overflow when parsing the operating channel attribute from Wi-Fi management frames. |
| CVE-2022-47520 | An issue was discovered in the Linux kernel before 6.0.11. Missing offset validation in drivers/net/wireless/microchip/wilc1000/hif.c in the WILC1000 wireless driver can trigger an out-of-bounds read when parsing a Robust Security Network (RSN) information element from a Netlink packet. |
| CVE-2022-47519 | An issue was discovered in the Linux kernel before 6.0.11. Missing validation of IEEE80211_P2P_ATTR_OPER_CHANNEL in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger an out-of-bounds write when parsing the channel list attribute from Wi-Fi management frames. |
| CVE-2022-47518 | An issue was discovered in the Linux kernel before 6.0.11. Missing validation of the number of channels in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger a heap-based buffer overflow when copying the list of operating channels from Wi-Fi management frames. |
| CVE-2022-4744 | A double-free flaw was found in the Linux kernel’s TUN/TAP device driver functionality in how a user registers the device when the register_netdevice function fails (NETDEV_REGISTER notifier). This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| CVE-2022-4696 | There exists a use-after-free vulnerability in the Linux kernel through io_uring and the IORING_OP_SPLICE operation. If IORING_OP_SPLICE is missing the IO_WQ_WORK_FILES flag, which signals that the operation won't use current->nsproxy, so its reference counter is not increased. This assumption is not always true as calling io_splice on specific files will call the get_uts function which will use current->nsproxy leading to invalidly decreasing its reference counter later causing the use-after-free vulnerability. We recommend upgrading to version 5.10.160 or above |
| CVE-2022-4662 | A flaw incorrect access control in the Linux kernel USB core subsystem was found in the way user attaches usb device. A local user could use this flaw to crash the system. |
| CVE-2022-45934 | An issue was discovered in the Linux kernel through 6.0.10. l2cap_config_req in net/bluetooth/l2cap_core.c has an integer wraparound via L2CAP_CONF_REQ packets. |
| CVE-2022-45919 | An issue was discovered in the Linux kernel through 6.0.10. In drivers/media/dvb-core/dvb_ca_en50221.c, a use-after-free can occur is there is a disconnect after an open, because of the lack of a wait_event. |
| CVE-2022-45888 | An issue was discovered in the Linux kernel through 6.0.9. drivers/char/xillybus/xillyusb.c has a race condition and use-after-free during physical removal of a USB device. |
| CVE-2022-45887 | An issue was discovered in the Linux kernel through 6.0.9. drivers/media/usb/ttusb-dec/ttusb_dec.c has a memory leak because of the lack of a dvb_frontend_detach call. |
| CVE-2022-45886 | An issue was discovered in the Linux kernel through 6.0.9. drivers/media/dvb-core/dvb_net.c has a .disconnect versus dvb_device_open race condition that leads to a use-after-free. |
| CVE-2022-45885 | An issue was discovered in the Linux kernel through 6.0.9. drivers/media/dvb-core/dvb_frontend.c has a race condition that can cause a use-after-free when a device is disconnected. |
| CVE-2022-45884 | An issue was discovered in the Linux kernel through 6.0.9. drivers/media/dvb-core/dvbdev.c has a use-after-free, related to dvb_register_device dynamically allocating fops. |
| CVE-2022-45869 | A race condition in the x86 KVM subsystem in the Linux kernel through 6.1-rc6 allows guest OS users to cause a denial of service (host OS crash or host OS memory corruption) when nested virtualisation and the TDP MMU are enabled. |
| CVE-2022-4543 | A flaw named "EntryBleed" was found in the Linux Kernel Page Table Isolation (KPTI). This issue could allow a local attacker to leak KASLR base via prefetch side-channels based on TLB timing for Intel systems. |
| CVE-2022-44689 | Windows Subsystem for Linux (WSL2) Kernel Elevation of Privilege Vulnerability |
| CVE-2022-44034 | An issue was discovered in the Linux kernel through 6.0.6. drivers/char/pcmcia/scr24x_cs.c has a race condition and resultant use-after-free if a physically proximate attacker removes a PCMCIA device while calling open(), aka a race condition between scr24x_open() and scr24x_remove(). |
| CVE-2022-44033 | An issue was discovered in the Linux kernel through 6.0.6. drivers/char/pcmcia/cm4040_cs.c has a race condition and resultant use-after-free if a physically proximate attacker removes a PCMCIA device while calling open(), aka a race condition between cm4040_open() and reader_detach(). |
| CVE-2022-44032 | An issue was discovered in the Linux kernel through 6.0.6. drivers/char/pcmcia/cm4000_cs.c has a race condition and resultant use-after-free if a physically proximate attacker removes a PCMCIA device while calling open(), aka a race condition between cmm_open() and cm4000_detach(). |
| CVE-2022-43945 | The Linux kernel NFSD implementation prior to versions 5.19.17 and 6.0.2 are vulnerable to buffer overflow. NFSD tracks the number of pages held by each NFSD thread by combining the receive and send buffers of a remote procedure call (RPC) into a single array of pages. A client can force the send buffer to shrink by sending an RPC message over TCP with garbage data added at the end of the message. The RPC message with garbage data is still correctly formed according to the specification and is passed forward to handlers. Vulnerable code in NFSD is not expecting the oversized request and writes beyond the allocated buffer space. CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H |
| CVE-2022-4379 | A use-after-free vulnerability was found in __nfs42_ssc_open() in fs/nfs/nfs4file.c in the Linux kernel. This flaw allows an attacker to conduct a remote denial |
| CVE-2022-4378 | A stack overflow flaw was found in the Linux kernel's SYSCTL subsystem in how a user changes certain kernel parameters and variables. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| CVE-2022-43750 | drivers/usb/mon/mon_bin.c in usbmon in the Linux kernel before 5.19.15 and 6.x before 6.0.1 allows a user-space client to corrupt the monitor's internal memory. |
| CVE-2022-42896 | There are use-after-free vulnerabilities in the Linux kernel's net/bluetooth/l2cap_core.c's l2cap_connect and l2cap_le_connect_req functions which may allow code execution and leaking kernel memory (respectively) remotely via Bluetooth. A remote attacker could execute code leaking kernel memory via Bluetooth if within proximity of the victim. We recommend upgrading past commit https://www.google.com/url https://github.com/torvalds/linux/commit/711f8c3fb3db61897080468586b970c87c61d9e4 https://www.google.com/url |
| CVE-2022-42895 | There is an infoleak vulnerability in the Linux kernel's net/bluetooth/l2cap_core.c's l2cap_parse_conf_req function which can be used to leak kernel pointers remotely. We recommend upgrading past commit https://github.com/torvalds/linux/commit/b1a2cd50c0357f243b7435a732b4e62ba3157a2e https://www.google.com/url |
| CVE-2022-42722 | In the Linux kernel 5.8 through 5.19.x before 5.19.16, local attackers able to inject WLAN frames into the mac80211 stack could cause a NULL pointer dereference denial-of-service attack against the beacon protection of P2P devices. |
| CVE-2022-42721 | A list management bug in BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to corrupt a linked list and, in turn, potentially execute code. |
| CVE-2022-42720 | Various refcounting bugs in the multi-BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to trigger use-after-free conditions to potentially execute code. |
| CVE-2022-42719 | A use-after-free in the mac80211 stack when parsing a multi-BSSID element in the Linux kernel 5.2 through 5.19.x before 5.19.16 could be used by attackers (able to inject WLAN frames) to crash the kernel and potentially execute code. |
| CVE-2022-42703 | mm/rmap.c in the Linux kernel before 5.19.7 has a use-after-free related to leaf anon_vma double reuse. |
| CVE-2022-4269 | A flaw was found in the Linux kernel Traffic Control (TC) subsystem. Using a specific networking configuration (redirecting egress packets to ingress using TC action "mirred") a local unprivileged user could trigger a CPU soft lockup (ABBA deadlock) when the transport protocol in use (TCP or SCTP) does a retransmission, resulting in a denial of service condition. |
| CVE-2022-42432 | This vulnerability allows local attackers to disclose sensitive information on affected installations of the Linux Kernel 6.0-rc2. An attacker must first obtain the ability to execute high-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the nft_osf_eval function. The issue results from the lack of proper initialization of memory prior to accessing it. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the kernel. Was ZDI-CAN-18540. |
| CVE-2022-42270 | NVIDIA distributions of Linux contain a vulnerability in nvdla_emu_task_submit, where unvalidated input may allow a local attacker to cause stack-based buffer overflow in kernel code, which may lead to escalation of privileges, compromised integrity and confidentiality, and denial of service. |
| CVE-2022-42265 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an integer overflow may lead to information disclosure or data tampering. |
| CVE-2022-42264 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer, where an unprivileged regular user can cause the use of an out-of-range pointer offset, which may lead to data tampering, data loss, information disclosure, or denial of service. |
| CVE-2022-42263 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where an Integer overflow may lead to denial of service or information disclosure. |
| CVE-2022-42259 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an integer overflow may lead to denial of service. |
| CVE-2022-42258 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an integer overflow may lead to denial of service, data tampering, or information disclosure. |
| CVE-2022-42257 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an integer overflow may lead to information disclosure, data tampering or denial of service. |
| CVE-2022-42256 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an integer overflow in index validation may lead to denial of service, information disclosure, or data tampering. |
| CVE-2022-42255 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an out-of-bounds array access may lead to denial of service, information disclosure, or data tampering. |
| CVE-2022-42254 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an out-of-bounds array access may lead to denial of service, data tampering, or information disclosure. |
| CVE-2022-41858 | A flaw was found in the Linux kernel. A NULL pointer dereference may occur while a slip driver is in progress to detach in sl_tx_timeout in drivers/net/slip/slip.c. This issue could allow an attacker to crash the system or leak internal kernel information. |
| CVE-2022-41850 | roccat_report_event in drivers/hid/hid-roccat.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free in certain situations where a report is received while copying a report->value is in progress. |
| CVE-2022-41849 | drivers/video/fbdev/smscufx.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a USB device while calling open(), aka a race condition between ufx_ops_open and ufx_usb_disconnect. |
| CVE-2022-41848 | drivers/char/pcmcia/synclink_cs.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a PCMCIA device while calling ioctl, aka a race condition between mgslpc_ioctl and mgslpc_detach. |
| CVE-2022-41674 | An issue was discovered in the Linux kernel before 5.19.16. Attackers able to inject WLAN frames could cause a buffer overflow in the ieee80211_bss_info_update function in net/mac80211/scan.c. |
| CVE-2022-4139 | An incorrect TLB flush issue was found in the Linux kernel’s GPU i915 kernel driver, potentially leading to random memory corruption or data leaks. This flaw could allow a local user to crash the system or escalate their privileges on the system. |
| CVE-2022-4129 | A flaw was found in the Linux kernel's Layer 2 Tunneling Protocol (L2TP). A missing lock when clearing sk_user_data can lead to a race condition and NULL pointer dereference. A local user could use this flaw to potentially crash the system causing a denial of service. |
| CVE-2022-4128 | A NULL pointer dereference issue was discovered in the Linux kernel in the MPTCP protocol when traversing the subflow list at disconnect time. A local user could use this flaw to potentially crash the system causing a denial of service. |
| CVE-2022-4127 | A NULL pointer dereference issue was discovered in the Linux kernel in io_files_update_with_index_alloc. A local user could use this flaw to potentially crash the system causing a denial of service. |
| CVE-2022-41222 | mm/mremap.c in the Linux kernel before 5.13.3 has a use-after-free via a stale TLB because an rmap lock is not held during a PUD move. |
| CVE-2022-41218 | In drivers/media/dvb-core/dmxdev.c in the Linux kernel through 5.19.10, there is a use-after-free caused by refcount races, affecting dvb_demux_open and dvb_dmxdev_release. |
| CVE-2022-4095 | A use-after-free flaw was found in Linux kernel before 5.19.2. This issue occurs in cmd_hdl_filter in drivers/staging/rtl8712/rtl8712_cmd.c, allowing an attacker to launch a local denial of service attack and gain escalation of privileges. |
| CVE-2022-40768 | drivers/scsi/stex.c in the Linux kernel through 5.19.9 allows local users to obtain sensitive information from kernel memory because stex_queuecommand_lck lacks a memset for the PASSTHRU_CMD case. |
| CVE-2022-40540 | Memory corruption due to buffer copy without checking the size of input while loading firmware in Linux Kernel. |
| CVE-2022-40476 | A null pointer dereference issue was discovered in fs/io_uring.c in the Linux kernel before 5.15.62. A local user could use this flaw to crash the system or potentially cause a denial of service. |
| CVE-2022-40307 | An issue was discovered in the Linux kernel through 5.19.8. drivers/firmware/efi/capsule-loader.c has a race condition with a resultant use-after-free. |
| CVE-2022-40133 | A use-after-free(UAF) vulnerability was found in function 'vmw_execbuf_tie_context' in drivers/gpu/vmxgfx/vmxgfx_execbuf.c in Linux kernel's vmwgfx driver with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS). |
| CVE-2022-39842 | ** DISPUTED ** An issue was discovered in the Linux kernel before 5.19. In pxa3xx_gcu_write in drivers/video/fbdev/pxa3xx-gcu.c, the count parameter has a type conflict of size_t versus int, causing an integer overflow and bypassing the size check. After that, because it is used as the third argument to copy_from_user(), a heap overflow may occur. NOTE: the original discoverer disputes that the overflow can actually happen. |
| CVE-2022-3977 | A use-after-free flaw was found in the Linux kernel MCTP (Management Component Transport Protocol) functionality. This issue occurs when a user simultaneously calls DROPTAG ioctl and socket close happens, which could allow a local user to crash the system or potentially escalate their privileges on the system. |
| CVE-2022-39190 | An issue was discovered in net/netfilter/nf_tables_api.c in the Linux kernel before 5.19.6. A denial of service can occur upon binding to an already bound chain. |
| CVE-2022-39189 | An issue was discovered the x86 KVM subsystem in the Linux kernel before 5.18.17. Unprivileged guest users can compromise the guest kernel because TLB flush operations are mishandled in certain KVM_VCPU_PREEMPTED situations. |
| CVE-2022-39188 | An issue was discovered in include/asm-generic/tlb.h in the Linux kernel before 5.19. Because of a race condition (unmap_mapping_range versus munmap), a device driver can free a page while it still has stale TLB entries. This only occurs in situations with VM_PFNMAP VMAs. |
| CVE-2022-3910 | Use After Free vulnerability in Linux Kernel allows Privilege Escalation. An improper Update of Reference Count in io_uring leads to Use-After-Free and Local Privilege Escalation. When io_msg_ring was invoked with a fixed file, it called io_fput_file() which improperly decreased its reference count (leading to Use-After-Free and Local Privilege Escalation). Fixed files are permanently registered to the ring, and should not be put separately. We recommend upgrading past commit https://github.com/torvalds/linux/commit/fc7222c3a9f56271fba02aabbfbae999042f1679 https://github.com/torvalds/linux/commit/fc7222c3a9f56271fba02aabbfbae999042f1679 |
| CVE-2022-3903 | An incorrect read request flaw was found in the Infrared Transceiver USB driver in the Linux kernel. This issue occurs when a user attaches a malicious USB device. A local user could use this flaw to starve the resources, causing denial of service or potentially crashing the system. |
| CVE-2022-38457 | A use-after-free(UAF) vulnerability was found in function 'vmw_cmd_res_check' in drivers/gpu/vmxgfx/vmxgfx_execbuf.c in Linux kernel's vmwgfx driver with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS). |
| CVE-2022-38096 | A NULL pointer dereference vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_execbuf.c in GPU component of Linux kernel with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS). |
| CVE-2022-38014 | Windows Subsystem for Linux (WSL2) Kernel Elevation of Privilege Vulnerability |
| CVE-2022-3707 | A double-free memory flaw was found in the Linux kernel. The Intel GVT-g graphics driver triggers VGA card system resource overload, causing a fail in the intel_gvt_dma_map_guest_page function. This issue could allow a local user to crash the system. |
| CVE-2022-36946 | nfqnl_mangle in net/netfilter/nfnetlink_queue.c in the Linux kernel through 5.18.14 allows remote attackers to cause a denial of service (panic) because, in the case of an nf_queue verdict with a one-byte nfta_payload attribute, an skb_pull can encounter a negative skb->len. |
| CVE-2022-36879 | An issue was discovered in the Linux kernel through 5.18.14. xfrm_expand_policies in net/xfrm/xfrm_policy.c can cause a refcount to be dropped twice. |
| CVE-2022-3649 | A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_new_inode of the file fs/nilfs2/inode.c of the component BPF. The manipulation leads to use after free. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211992. |
| CVE-2022-3646 | A vulnerability, which was classified as problematic, has been found in Linux Kernel. This issue affects the function nilfs_attach_log_writer of the file fs/nilfs2/segment.c of the component BPF. The manipulation leads to memory leak. The attack may be initiated remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211961 was assigned to this vulnerability. |
| CVE-2022-36402 | An integer overflow vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_execbuf.c in GPU component of Linux kernel with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS). |
| CVE-2022-3640 | A vulnerability, which was classified as critical, was found in Linux Kernel. Affected is the function l2cap_conn_del of the file net/bluetooth/l2cap_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211944. |
| CVE-2022-3637 | A vulnerability has been found in Linux Kernel and classified as problematic. This vulnerability affects the function jlink_init of the file monitor/jlink.c of the component BlueZ. The manipulation leads to denial of service. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211936. |
| CVE-2022-3636 | A vulnerability, which was classified as critical, was found in Linux Kernel. This affects the function __mtk_ppe_check_skb of the file drivers/net/ethernet/mediatek/mtk_ppe.c of the component Ethernet Handler. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211935. |
| CVE-2022-3635 | A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function tst_timer of the file drivers/atm/idt77252.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. VDB-211934 is the identifier assigned to this vulnerability. |
| CVE-2022-3633 | A vulnerability classified as problematic has been found in Linux Kernel. Affected is the function j1939_session_destroy of the file net/can/j1939/transport.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211932. |
| CVE-2022-3630 | A vulnerability was found in Linux Kernel. It has been rated as problematic. This issue affects some unknown processing of the file fs/fscache/cookie.c of the component IPsec. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211931. |
| CVE-2022-3629 | A vulnerability was found in Linux Kernel. It has been declared as problematic. This vulnerability affects the function vsock_connect of the file net/vmw_vsock/af_vsock.c. The manipulation leads to memory leak. The complexity of an attack is rather high. The exploitation appears to be difficult. It is recommended to apply a patch to fix this issue. VDB-211930 is the identifier assigned to this vulnerability. |
| CVE-2022-36280 | An out-of-bounds(OOB) memory access vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_kms.c in GPU component in the Linux kernel with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS). |
| CVE-2022-3628 | A buffer overflow flaw was found in the Linux kernel Broadcom Full MAC Wi-Fi driver. This issue occurs when a user connects to a malicious USB device. This can allow a local user to crash the system or escalate their privileges. |
| CVE-2022-3625 | A vulnerability was found in Linux Kernel. It has been classified as critical. This affects the function devlink_param_set/devlink_param_get of the file net/core/devlink.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211929 was assigned to this vulnerability. |
| CVE-2022-3624 | A vulnerability was found in Linux Kernel and classified as problematic. Affected by this issue is the function rlb_arp_xmit of the file drivers/net/bonding/bond_alb.c of the component IPsec. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211928. |
| CVE-2022-3623 | A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function follow_page_pte of the file mm/gup.c of the component BPF. The manipulation leads to race condition. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211921 was assigned to this vulnerability. |
| CVE-2022-3621 | A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_bmap_lookup_at_level of the file fs/nilfs2/inode.c of the component nilfs2. The manipulation leads to null pointer dereference. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211920. |
| CVE-2022-3619 | A vulnerability has been found in Linux Kernel and classified as problematic. This vulnerability affects the function l2cap_recv_acldata of the file net/bluetooth/l2cap_core.c of the component Bluetooth. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. VDB-211918 is the identifier assigned to this vulnerability. |
| CVE-2022-36123 | The Linux kernel before 5.18.13 lacks a certain clear operation for the block starting symbol (.bss). This allows Xen PV guest OS users to cause a denial of service or gain privileges. |
| CVE-2022-3606 | A vulnerability was found in Linux Kernel. It has been classified as problematic. This affects the function find_prog_by_sec_insn of the file tools/lib/bpf/libbpf.c of the component BPF. The manipulation leads to null pointer dereference. It is recommended to apply a patch to fix this issue. The identifier VDB-211749 was assigned to this vulnerability. |
| CVE-2022-3595 | A vulnerability was found in Linux Kernel. It has been rated as problematic. Affected by this issue is the function sess_free_buffer of the file fs/cifs/sess.c of the component CIFS Handler. The manipulation leads to double free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211364. |
| CVE-2022-3594 | A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function intr_callback of the file drivers/net/usb/r8152.c of the component BPF. The manipulation leads to logging of excessive data. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211363. |
| CVE-2022-3577 | An out-of-bounds memory write flaw was found in the Linux kernel’s Kid-friendly Wired Controller driver. This flaw allows a local user to crash or potentially escalate their privileges on the system. It is in bigben_probe of drivers/hid/hid-bigbenff.c. The reason is incorrect assumption - bigben devices all have inputs. However, malicious devices can break this assumption, leaking to out-of-bound write. |
| CVE-2022-3567 | A vulnerability has been found in Linux Kernel and classified as problematic. This vulnerability affects the function inet6_stream_ops/inet6_dgram_ops of the component IPv6 Handler. The manipulation leads to race condition. It is recommended to apply a patch to fix this issue. VDB-211090 is the identifier assigned to this vulnerability. |
| CVE-2022-3566 | A vulnerability, which was classified as problematic, was found in Linux Kernel. This affects the function tcp_getsockopt/tcp_setsockopt of the component TCP Handler. The manipulation leads to race condition. It is recommended to apply a patch to fix this issue. The identifier VDB-211089 was assigned to this vulnerability. |
| CVE-2022-3565 | A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function del_timer of the file drivers/isdn/mISDN/l1oip_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211088. |
| CVE-2022-3564 | A vulnerability classified as critical was found in Linux Kernel. Affected by this vulnerability is the function l2cap_reassemble_sdu of the file net/bluetooth/l2cap_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211087. |
| CVE-2022-3563 | A vulnerability classified as problematic has been found in Linux Kernel. Affected is the function read_50_controller_cap_complete of the file tools/mgmt-tester.c of the component BlueZ. The manipulation of the argument cap_len leads to null pointer dereference. It is recommended to apply a patch to fix this issue. VDB-211086 is the identifier assigned to this vulnerability. |
| CVE-2022-3545 | A vulnerability has been found in Linux Kernel and classified as critical. Affected by this vulnerability is the function area_cache_get of the file drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211045 was assigned to this vulnerability. |
| CVE-2022-3544 | A vulnerability, which was classified as problematic, was found in Linux Kernel. Affected is the function damon_sysfs_add_target of the file mm/damon/sysfs.c of the component Netfilter. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211044. |
| CVE-2022-3543 | A vulnerability, which was classified as problematic, has been found in Linux Kernel. This issue affects the function unix_sock_destructor/unix_release_sock of the file net/unix/af_unix.c of the component BPF. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211043. |
| CVE-2022-3541 | A vulnerability classified as critical has been found in Linux Kernel. This affects the function spl2sw_nvmem_get_mac_address of the file drivers/net/ethernet/sunplus/spl2sw_driver.c of the component BPF. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211041 was assigned to this vulnerability. |
| CVE-2022-3534 | A vulnerability classified as critical has been found in Linux Kernel. Affected is the function btf_dump_name_dups of the file tools/lib/bpf/btf_dump.c of the component libbpf. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211032. |
| CVE-2022-3533 | A vulnerability was found in Linux Kernel. It has been rated as problematic. This issue affects the function parse_usdt_arg of the file tools/lib/bpf/usdt.c of the component BPF. The manipulation of the argument reg_name leads to memory leak. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211031. |
| CVE-2022-3526 | A vulnerability classified as problematic was found in Linux Kernel. This vulnerability affects the function macvlan_handle_frame of the file drivers/net/macvlan.c of the component skb. The manipulation leads to memory leak. The attack can be initiated remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211024. |
| CVE-2022-3524 | A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function ipv6_renew_options of the component IPv6 Handler. The manipulation leads to memory leak. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211021 was assigned to this vulnerability. |
| CVE-2022-3523 | A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is an unknown function of the file mm/memory.c of the component Driver Handler. The manipulation leads to use after free. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211020. |
| CVE-2022-3521 | A vulnerability has been found in Linux Kernel and classified as problematic. This vulnerability affects the function kcm_tx_work of the file net/kcm/kcmsock.c of the component kcm. The manipulation leads to race condition. It is recommended to apply a patch to fix this issue. VDB-211018 is the identifier assigned to this vulnerability. |
| CVE-2022-34918 | An issue was discovered in the Linux kernel through 5.18.9. A type confusion bug in nft_set_elem_init (leading to a buffer overflow) could be used by a local attacker to escalate privileges, a different vulnerability than CVE-2022-32250. (The attacker can obtain root access, but must start with an unprivileged user namespace to obtain CAP_NET_ADMIN access.) This can be fixed in nft_setelem_parse_data in net/netfilter/nf_tables_api.c. |
| CVE-2022-34684 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an off-by-one error may lead to data tampering or information disclosure. |
| CVE-2022-34682 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer, where an unprivileged regular user can cause a null-pointer dereference, which may lead to denial of service. |
| CVE-2022-34680 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where an integer truncation can lead to an out-of-bounds read, which may lead to denial of service. |
| CVE-2022-34679 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where an unhandled return value can lead to a null-pointer dereference, which may lead to denial of service. |
| CVE-2022-34678 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where an unprivileged user can cause a null-pointer dereference, which may lead to denial of service. |
| CVE-2022-34677 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where an unprivileged regular user can cause an integer to be truncated, which may lead to denial of service or data tampering. |
| CVE-2022-34676 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where an out-of-bounds read may lead to denial of service, information disclosure, or data tampering. |
| CVE-2022-34674 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where a helper function maps more physical pages than were requested, which may lead to undefined behavior or an information leak. |
| CVE-2022-34673 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an out-of-bounds array access may lead to denial of service, information disclosure, or data tampering. |
| CVE-2022-34670 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where an unprivileged regular user can cause truncation errors when casting a primitive to a primitive of smaller size causes data to be lost in the conversion, which may lead to denial of service or information disclosure. |
| CVE-2022-34666 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a local user with basic capabilities can cause a null-pointer dereference, which may lead to denial of service. |
| CVE-2022-34665 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a local user with basic capabilities can cause a null-pointer dereference, which may lead to denial of service. |
| CVE-2022-34495 | rpmsg_probe in drivers/rpmsg/virtio_rpmsg_bus.c in the Linux kernel before 5.18.4 has a double free. |
| CVE-2022-34494 | rpmsg_virtio_add_ctrl_dev in drivers/rpmsg/virtio_rpmsg_bus.c in the Linux kernel before 5.18.4 has a double free. |
| CVE-2022-3435 | A vulnerability classified as problematic has been found in Linux Kernel. This affects the function fib_nh_match of the file net/ipv4/fib_semantics.c of the component IPv4 Handler. The manipulation leads to out-of-bounds read. It is possible to initiate the attack remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-210357 was assigned to this vulnerability. |
| CVE-2022-3424 | A use-after-free flaw was found in the Linux kernel’s SGI GRU driver in the way the first gru_file_unlocked_ioctl function is called by the user, where a fail pass occurs in the gru_check_chiplet_assignment function. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| CVE-2022-33981 | drivers/block/floppy.c in the Linux kernel before 5.17.6 is vulnerable to a denial of service, because of a concurrency use-after-free flaw after deallocating raw_cmd in the raw_cmd_ioctl function. |
| CVE-2022-33303 | Transient DOS due to uncontrolled resource consumption in Linux kernel when malformed messages are sent from the Gunyah Resource Manager message queue. |
| CVE-2022-3303 | A race condition flaw was found in the Linux kernel sound subsystem due to improper locking. It could lead to a NULL pointer dereference while handling the SNDCTL_DSP_SYNC ioctl. A privileged local user (root or member of the audio group) could use this flaw to crash the system, resulting in a denial of service condition |
| CVE-2022-32981 | An issue was discovered in the Linux kernel through 5.18.3 on powerpc 32-bit platforms. There is a buffer overflow in ptrace PEEKUSER and POKEUSER (aka PEEKUSR and POKEUSR) when accessing floating point registers. |
| CVE-2022-3239 | A flaw use after free in the Linux kernel video4linux driver was found in the way user triggers em28xx_usb_probe() for the Empia 28xx based TV cards. A local user could use this flaw to crash the system or potentially escalate their privileges on the system. |
| CVE-2022-32296 | The Linux kernel before 5.17.9 allows TCP servers to identify clients by observing what source ports are used. This occurs because of use of Algorithm 4 ("Double-Hash Port Selection Algorithm") of RFC 6056. |
| CVE-2022-32250 | net/netfilter/nf_tables_api.c in the Linux kernel through 5.18.1 allows a local user (able to create user/net namespaces) to escalate privileges to root because an incorrect NFT_STATEFUL_EXPR check leads to a use-after-free. |
| CVE-2022-3202 | A NULL pointer dereference flaw in diFree in fs/jfs/inode.c in Journaled File System (JFS)in the Linux kernel. This could allow a local attacker to crash the system or leak kernel internal information. |
| CVE-2022-3176 | There exists a use-after-free in io_uring in the Linux kernel. Signalfd_poll() and binder_poll() use a waitqueue whose lifetime is the current task. It will send a POLLFREE notification to all waiters before the queue is freed. Unfortunately, the io_uring poll doesn't handle POLLFREE. This allows a use-after-free to occur if a signalfd or binder fd is polled with io_uring poll, and the waitqueue gets freed. We recommend upgrading past commit fc78b2fc21f10c4c9c4d5d659a685710ffa63659 |
| CVE-2022-3170 | An out-of-bounds access issue was found in the Linux kernel sound subsystem. It could occur when the 'id->name' provided by the user did not end with '\0'. A privileged local user could pass a specially crafted name through ioctl() interface and crash the system or potentially escalate their privileges on the system. |
| CVE-2022-3169 | A flaw was found in the Linux kernel. A denial of service flaw may occur if there is a consecutive request of the NVME_IOCTL_RESET and the NVME_IOCTL_SUBSYS_RESET through the device file of the driver, resulting in a PCIe link disconnect. |
| CVE-2022-31615 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer, where a local user with basic capabilities can cause a null-pointer dereference, which may lead to denial of service. |
| CVE-2022-31607 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where a local user with basic capabilities can cause improper input validation, which may lead to denial of service, escalation of privileges, data tampering, and limited information disclosure. |
| CVE-2022-3115 | An issue was discovered in the Linux kernel through 5.16-rc6. malidp_crtc_reset in drivers/gpu/drm/arm/malidp_crtc.c lacks check of the return value of kzalloc() and will cause the null pointer dereference. |
| CVE-2022-3114 | An issue was discovered in the Linux kernel through 5.16-rc6. imx_register_uart_clocks in drivers/clk/imx/clk.c lacks check of the return value of kcalloc() and will cause the null pointer dereference. |
| CVE-2022-3113 | An issue was discovered in the Linux kernel through 5.16-rc6. mtk_vcodec_fw_vpu_init in drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c lacks check of the return value of devm_kzalloc() and will cause the null pointer dereference. |
| CVE-2022-3112 | An issue was discovered in the Linux kernel through 5.16-rc6. amvdec_set_canvases in drivers/staging/media/meson/vdec/vdec_helpers.c lacks check of the return value of kzalloc() and will cause the null pointer dereference. |
| CVE-2022-3111 | An issue was discovered in the Linux kernel through 5.16-rc6. free_charger_irq() in drivers/power/supply/wm8350_power.c lacks free of WM8350_IRQ_CHG_FAST_RDY, which is registered in wm8350_init_charger(). |
| CVE-2022-3110 | An issue was discovered in the Linux kernel through 5.16-rc6. _rtw_init_xmit_priv in drivers/staging/r8188eu/core/rtw_xmit.c lacks check of the return value of rtw_alloc_hwxmits() and will cause the null pointer dereference. |
| CVE-2022-3108 | An issue was discovered in the Linux kernel through 5.16-rc6. kfd_parse_subtype_iolink in drivers/gpu/drm/amd/amdkfd/kfd_crat.c lacks check of the return value of kmemdup(). |
| CVE-2022-3107 | An issue was discovered in the Linux kernel through 5.16-rc6. netvsc_get_ethtool_stats in drivers/net/hyperv/netvsc_drv.c lacks check of the return value of kvmalloc_array() and will cause the null pointer dereference. |
| CVE-2022-3106 | An issue was discovered in the Linux kernel through 5.16-rc6. ef100_update_stats in drivers/net/ethernet/sfc/ef100_nic.c lacks check of the return value of kmalloc(). |
| CVE-2022-3105 | An issue was discovered in the Linux kernel through 5.16-rc6. uapi_finalize in drivers/infiniband/core/uverbs_uapi.c lacks check of kmalloc_array(). |
| CVE-2022-3104 | An issue was discovered in the Linux kernel through 5.16-rc6. lkdtm_ARRAY_BOUNDS in drivers/misc/lkdtm/bugs.c lacks check of the return value of kmalloc() and will cause the null pointer dereference. |
| CVE-2022-3078 | An issue was discovered in the Linux kernel through 5.16-rc6. There is a lack of check after calling vzalloc() and lack of free after allocation in drivers/media/test-drivers/vidtv/vidtv_s302m.c. |
| CVE-2022-3077 | A buffer overflow vulnerability was found in the Linux kernel Intel’s iSMT SMBus host controller driver in the way it handled the I2C_SMBUS_BLOCK_PROC_CALL case (via the ioctl I2C_SMBUS) with malicious input data. This flaw could allow a local user to crash the system. |
| CVE-2022-3061 | Found Linux Kernel flaw in the i740 driver. The Userspace program could pass any values to the driver through ioctl() interface. The driver doesn't check the value of 'pixclock', so it may cause a divide by zero error. |
| CVE-2022-30594 | The Linux kernel before 5.17.2 mishandles seccomp permissions. The PTRACE_SEIZE code path allows attackers to bypass intended restrictions on setting the PT_SUSPEND_SECCOMP flag. |
| CVE-2022-3028 | A race condition was found in the Linux kernel's IP framework for transforming packets (XFRM subsystem) when multiple calls to xfrm_probe_algs occurred simultaneously. This flaw could allow a local attacker to potentially trigger an out-of-bounds write or leak kernel heap memory by performing an out-of-bounds read and copying it into a socket. |
| CVE-2022-29968 | An issue was discovered in the Linux kernel through 5.17.5. io_rw_init_file in fs/io_uring.c lacks initialization of kiocb->private. |
| CVE-2022-2991 | A heap-based buffer overflow was found in the Linux kernel's LightNVM subsystem. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. This vulnerability allows a local attacker to escalate privileges and execute arbitrary code in the context of the kernel. The attacker must first obtain the ability to execute high-privileged code on the target system to exploit this vulnerability. |
| CVE-2022-29901 | Intel microprocessor generations 6 to 8 are affected by a new Spectre variant that is able to bypass their retpoline mitigation in the kernel to leak arbitrary data. An attacker with unprivileged user access can hijack return instructions to achieve arbitrary speculative code execution under certain microarchitecture-dependent conditions. |
| CVE-2022-2978 | A flaw use after free in the Linux kernel NILFS file system was found in the way user triggers function security_inode_alloc to fail with following call to function nilfs_mdt_destroy. A local user could use this flaw to crash the system or potentially escalate their privileges on the system. |
| CVE-2022-2977 | A flaw was found in the Linux kernel implementation of proxied virtualized TPM devices. On a system where virtualized TPM devices are configured (this is not the default) a local attacker can create a use-after-free and create a situation where it may be possible to escalate privileges on the system. |
| CVE-2022-2959 | A race condition was found in the Linux kernel's watch queue due to a missing lock in pipe_resize_ring(). The specific flaw exists within the handling of pipe buffers. The issue results from the lack of proper locking when performing operations on an object. This flaw allows a local user to crash the system or escalate their privileges on the system. |
| CVE-2022-29582 | In the Linux kernel before 5.17.3, fs/io_uring.c has a use-after-free due to a race condition in io_uring timeouts. This can be triggered by a local user who has no access to any user namespace; however, the race condition perhaps can only be exploited infrequently. |
| CVE-2022-29581 | Improper Update of Reference Count vulnerability in net/sched of Linux Kernel allows local attacker to cause privilege escalation to root. This issue affects: Linux Kernel versions prior to 5.18; version 4.14 and later versions. |
| CVE-2022-2938 | A flaw was found in the Linux kernel's implementation of Pressure Stall Information. While the feature is disabled by default, it could allow an attacker to crash the system or have other memory-corruption side effects. |
| CVE-2022-29156 | drivers/infiniband/ulp/rtrs/rtrs-clt.c in the Linux kernel before 5.16.12 has a double free related to rtrs_clt_dev_release. |
| CVE-2022-2905 | An out-of-bounds memory read flaw was found in the Linux kernel's BPF subsystem in how a user calls the bpf_tail_call function with a key larger than the max_entries of the map. This flaw allows a local user to gain unauthorized access to data. |
| CVE-2022-28893 | The SUNRPC subsystem in the Linux kernel through 5.17.2 can call xs_xprt_free before ensuring that sockets are in the intended state. |
| CVE-2022-28796 | jbd2_journal_wait_updates in fs/jbd2/transaction.c in the Linux kernel before 5.17.1 has a use-after-free caused by a transaction_t race condition. |
| CVE-2022-2873 | An out-of-bounds memory access flaw was found in the Linux kernel Intel’s iSMT SMBus host controller driver in the way a user triggers the I2C_SMBUS_BLOCK_DATA (with the ioctl I2C_SMBUS) with malicious input data. This flaw allows a local user to crash the system. |
| CVE-2022-28390 | ems_usb_start_xmit in drivers/net/can/usb/ems_usb.c in the Linux kernel through 5.17.1 has a double free. |
| CVE-2022-28389 | mcba_usb_start_xmit in drivers/net/can/usb/mcba_usb.c in the Linux kernel through 5.17.1 has a double free. |
| CVE-2022-28388 | usb_8dev_start_xmit in drivers/net/can/usb/usb_8dev.c in the Linux kernel through 5.17.1 has a double free. |
| CVE-2022-28356 | In the Linux kernel before 5.17.1, a refcount leak bug was found in net/llc/af_llc.c. |
| CVE-2022-28184 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer (nvlddmkm.sys) handler for DxgkDdiEscape, where an unprivileged regular user can access administrator- privileged registers, which may lead to denial of service, information disclosure, and data tampering. |
| CVE-2022-28183 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where an unprivileged regular user can cause an out-of-bounds read, which may lead to denial of service and information disclosure. |
| CVE-2022-28181 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where an unprivileged regular user on the network can cause an out-of-bounds write through a specially crafted shader, which may lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. The scope of the impact may extend to other components. |
| CVE-2022-27950 | In drivers/hid/hid-elo.c in the Linux kernel before 5.16.11, a memory leak exists for a certain hid_parse error condition. |
| CVE-2022-2785 | There exists an arbitrary memory read within the Linux Kernel BPF - Constants provided to fill pointers in structs passed in to bpf_sys_bpf are not verified and can point anywhere, including memory not owned by BPF. An attacker with CAP_BPF can arbitrarily read memory from anywhere on the system. We recommend upgrading past commit 86f44fcec22c |
| CVE-2022-27666 | A heap buffer overflow flaw was found in IPsec ESP transformation code in net/ipv4/esp4.c and net/ipv6/esp6.c. This flaw allows a local attacker with a normal user privilege to overwrite kernel heap objects and may cause a local privilege escalation threat. |
| CVE-2022-27223 | In drivers/usb/gadget/udc/udc-xilinx.c in the Linux kernel before 5.16.12, the endpoint index is not validated and might be manipulated by the host for out-of-array access. |
| CVE-2022-26966 | An issue was discovered in the Linux kernel before 5.16.12. drivers/net/usb/sr9700.c allows attackers to obtain sensitive information from heap memory via crafted frame lengths from a device. |
| CVE-2022-26878 | drivers/bluetooth/virtio_bt.c in the Linux kernel before 5.16.3 has a memory leak (socket buffers have memory allocated but not freed). |
| CVE-2022-2663 | An issue was found in the Linux kernel in nf_conntrack_irc where the message handling can be confused and incorrectly matches the message. A firewall may be able to be bypassed when users are using unencrypted IRC with nf_conntrack_irc configured. |
| CVE-2022-26490 | st21nfca_connectivity_event_received in drivers/nfc/st21nfca/se.c in the Linux kernel through 5.16.12 has EVT_TRANSACTION buffer overflows because of untrusted length parameters. |
| CVE-2022-2639 | An integer coercion error was found in the openvswitch kernel module. Given a sufficiently large number of actions, while copying and reserving memory for a new action of a new flow, the reserve_sfa_size() function does not return -EMSGSIZE as expected, potentially leading to an out-of-bounds write access. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| CVE-2022-2590 | A race condition was found in the way the Linux kernel's memory subsystem handled the copy-on-write (COW) breakage of private read-only shared memory mappings. This flaw allows an unprivileged, local user to gain write access to read-only memory mappings, increasing their privileges on the system. |
| CVE-2022-2588 | It was discovered that the cls_route filter implementation in the Linux kernel would not remove an old filter from the hashtable before freeing it if its handle had the value 0. |
| CVE-2022-25636 | net/netfilter/nf_dup_netdev.c in the Linux kernel 5.4 through 5.6.10 allows local users to gain privileges because of a heap out-of-bounds write. This is related to nf_tables_offload. |
| CVE-2022-25375 | An issue was discovered in drivers/usb/gadget/function/rndis.c in the Linux kernel before 5.16.10. The RNDIS USB gadget lacks validation of the size of the RNDIS_MSG_SET command. Attackers can obtain sensitive information from kernel memory. |
| CVE-2022-25265 | In the Linux kernel through 5.16.10, certain binary files may have the exec-all attribute if they were built in approximately 2003 (e.g., with GCC 3.2.2 and Linux kernel 2.4.20). This can cause execution of bytes located in supposedly non-executable regions of a file. |
| CVE-2022-25258 | An issue was discovered in drivers/usb/gadget/composite.c in the Linux kernel before 5.16.10. The USB Gadget subsystem lacks certain validation of interface OS descriptor requests (ones with a large array index and ones associated with NULL function pointer retrieval). Memory corruption might occur. |
| CVE-2022-24959 | An issue was discovered in the Linux kernel before 5.16.5. There is a memory leak in yam_siocdevprivate in drivers/net/hamradio/yam.c. |
| CVE-2022-24958 | drivers/usb/gadget/legacy/inode.c in the Linux kernel through 5.16.8 mishandles dev->buf release. |
| CVE-2022-24448 | An issue was discovered in fs/nfs/dir.c in the Linux kernel before 5.16.5. If an application sets the O_DIRECTORY flag, and tries to open a regular file, nfs_atomic_open() performs a regular lookup. If a regular file is found, ENOTDIR should occur, but the server instead returns uninitialized data in the file descriptor. |
| CVE-2022-24122 | kernel/ucount.c in the Linux kernel 5.14 through 5.16.4, when unprivileged user namespaces are enabled, allows a use-after-free and privilege escalation because a ucounts object can outlive its namespace. |
| CVE-2022-2380 | The Linux kernel was found vulnerable out of bounds memory access in the drivers/video/fbdev/sm712fb.c:smtcfb_read() function. The vulnerability could result in local attackers being able to crash the kernel. |
| CVE-2022-23523 | In versions prior to 0.8.1, the linux-loader crate uses the offsets and sizes provided in the ELF headers to determine the offsets to read from. If those offsets point beyond the end of the file this could lead to Virtual Machine Monitors using the `linux-loader` crate entering an infinite loop if the ELF header of the kernel they are loading was modified in a malicious manner. This issue has been addressed in 0.8.1. The issue can be mitigated by ensuring that only trusted kernel images are loaded or by verifying that the headers do not point beyond the end of the file. |
| CVE-2022-2327 | io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859 |
| CVE-2022-23238 | Linux deployments of StorageGRID (formerly StorageGRID Webscale) versions 11.6.0 through 11.6.0.2 deployed with a Linux kernel version less than 4.7.0 are susceptible to a vulnerability which could allow a remote unauthenticated attacker to view limited metrics information and modify alert email recipients and content. |
| CVE-2022-23222 | kernel/bpf/verifier.c in the Linux kernel through 5.15.14 allows local users to gain privileges because of the availability of pointer arithmetic via certain *_OR_NULL pointer types. |
| CVE-2022-2318 | There are use-after-free vulnerabilities caused by timer handler in net/rose/rose_timer.c of linux that allow attackers to crash linux kernel without any privileges. |
| CVE-2022-2196 | A regression exists in the Linux Kernel within KVM: nVMX that allowed for speculative execution attacks. L2 can carry out Spectre v2 attacks on L1 due to L1 thinking it doesn't need retpolines or IBPB after running L2 due to KVM (L0) advertising eIBRS support to L1. An attacker at L2 with code execution can execute code on an indirect branch on the host machine. We recommend upgrading to Kernel 6.2 or past commit 2e7eab81425a |
| CVE-2022-21814 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel driver package, where improper handling of insufficient permissions or privileges may allow an unprivileged local user limited write access to protected memory, which can lead to denial of service. |
| CVE-2022-21813 | NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel driver, where improper handling of insufficient permissions or privileges may allow an unprivileged local user limited write access to protected memory, which can lead to denial of service. |
| CVE-2022-2153 | A flaw was found in the Linux kernel’s KVM when attempting to set a SynIC IRQ. This issue makes it possible for a misbehaving VMM to write to SYNIC/STIMER MSRs, causing a NULL pointer dereference. This flaw allows an unprivileged local attacker on the host to issue specific ioctl calls, causing a kernel oops condition that results in a denial of service. |
| CVE-2022-21385 | A flaw in net_rds_alloc_sgs() in Oracle Linux kernels allows unprivileged local users to crash the machine. CVSS 3.1 Base Score 6.2 (Availability impacts). CVSS Vector (CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) |
| CVE-2022-2078 | A vulnerability was found in the Linux kernel's nft_set_desc_concat_parse() function .This flaw allows an attacker to trigger a buffer overflow via nft_set_desc_concat_parse() , causing a denial of service and possibly to run code. |
| CVE-2022-20369 | In v4l2_m2m_querybuf of v4l2-mem2mem.c, there is a possible out of bounds write due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-223375145References: Upstream kernel |
| CVE-2022-1998 | A use after free in the Linux kernel File System notify functionality was found in the way user triggers copy_info_records_to_user() call to fail in copy_event_to_user(). A local user could use this flaw to crash the system or potentially escalate their privileges on the system. |
| CVE-2022-1976 | A flaw was found in the Linux kernel’s implementation of IO-URING. This flaw allows an attacker with local executable permission to create a string of requests that can cause a use-after-free flaw within the kernel. This issue leads to memory corruption and possible privilege escalation. |
| CVE-2022-1975 | There is a sleep-in-atomic bug in /net/nfc/netlink.c that allows an attacker to crash the Linux kernel by simulating a nfc device from user-space. |
| CVE-2022-1974 | A use-after-free flaw was found in the Linux kernel's NFC core functionality due to a race condition between kobject creation and delete. This vulnerability allows a local attacker with CAP_NET_ADMIN privilege to leak kernel information. |
| CVE-2022-1973 | A use-after-free flaw was found in the Linux kernel in log_replay in fs/ntfs3/fslog.c in the NTFS journal. This flaw allows a local attacker to crash the system and leads to a kernel information leak problem. |
| CVE-2022-1943 | A flaw out of bounds memory write in the Linux kernel UDF file system functionality was found in the way user triggers some file operation which triggers udf_write_fi(). A local user could use this flaw to crash the system or potentially |
| CVE-2022-1734 | A flaw in Linux Kernel found in nfcmrvl_nci_unregister_dev() in drivers/nfc/nfcmrvl/main.c can lead to use after free both read or write when non synchronized between cleanup routine and firmware download routine. |
| CVE-2022-1729 | A race condition was found the Linux kernel in perf_event_open() which can be exploited by an unprivileged user to gain root privileges. The bug allows to build several exploit primitives such as kernel address information leak, arbitrary execution, etc. |
| CVE-2022-1678 | An issue was discovered in the Linux Kernel from 4.18 to 4.19, an improper update of sock reference in TCP pacing can lead to memory/netns leak, which can be used by remote clients. |
| CVE-2022-1671 | A NULL pointer dereference flaw was found in rxrpc_preparse_s in net/rxrpc/server_key.c in the Linux kernel. This flaw allows a local attacker to crash the system or leak internal kernel information. |
| CVE-2022-1665 | A set of pre-production kernel packages of Red Hat Enterprise Linux for IBM Power architecture can be booted by the grub in Secure Boot mode even though it shouldn't. These kernel builds don't have the secure boot lockdown patches applied to it and can bypass the secure boot validations, allowing the attacker to load another non-trusted code. |
| CVE-2022-1652 | Linux Kernel could allow a local attacker to execute arbitrary code on the system, caused by a concurrency use-after-free flaw in the bad_flp_intr function. By executing a specially-crafted program, an attacker could exploit this vulnerability to execute arbitrary code or cause a denial of service condition on the system. |
| CVE-2022-1651 | A memory leak flaw was found in the Linux kernel in acrn_dev_ioctl in the drivers/virt/acrn/hsm.c function in how the ACRN Device Model emulates virtual NICs in VM. This flaw allows a local privileged attacker to leak unauthorized kernel information, causing a denial of service. |
| CVE-2022-1516 | A NULL pointer dereference flaw was found in the Linux kernel’s X.25 set of standardized network protocols functionality in the way a user terminates their session using a simulated Ethernet card and continued usage of this connection. This flaw allows a local user to crash the system. |
| CVE-2022-1508 | An out-of-bounds read flaw was found in the Linux kernel’s io_uring module in the way a user triggers the io_read() function with some special parameters. This flaw allows a local user to read some memory out of bounds. |
| CVE-2022-1353 | A vulnerability was found in the pfkey_register function in net/key/af_key.c in the Linux kernel. This flaw allows a local, unprivileged user to gain access to kernel memory, leading to a system crash or a leak of internal kernel information. |
| CVE-2022-1280 | A use-after-free vulnerability was found in drm_lease_held in drivers/gpu/drm/drm_lease.c in the Linux kernel due to a race problem. This flaw allows a local user privilege attacker to cause a denial of service (DoS) or a kernel information leak. |
| CVE-2022-1263 | A NULL pointer dereference issue was found in KVM when releasing a vCPU with dirty ring support enabled. This flaw allows an unprivileged local attacker on the host to issue specific ioctl calls, causing a kernel oops condition that results in a denial of service. |
| CVE-2022-1247 | An issue found in linux-kernel that leads to a race condition in rose_connect(). The rose driver uses rose_neigh->use to represent how many objects are using the rose_neigh. When a user wants to delete a rose_route via rose_ioctl(), the rose driver calls rose_del_node() and removes neighbours only if their “count” and “use” are zero. |
| CVE-2022-1199 | A flaw was found in the Linux kernel. This flaw allows an attacker to crash the Linux kernel by simulating amateur radio from the user space, resulting in a null-ptr-deref vulnerability and a use-after-free vulnerability. |
| CVE-2022-1198 | A use-after-free vulnerabilitity was discovered in drivers/net/hamradio/6pack.c of linux that allows an attacker to crash linux kernel by simulating ax25 device using 6pack driver from user space. |
| CVE-2022-1195 | A use-after-free vulnerability was found in the Linux kernel in drivers/net/hamradio. This flaw allows a local attacker with a user privilege to cause a denial of service (DOS) when the mkiss or sixpack device is detached and reclaim resources early. |
| CVE-2022-1116 | Integer Overflow or Wraparound vulnerability in io_uring of Linux Kernel allows local attacker to cause memory corruption and escalate privileges to root. This issue affects: Linux Kernel versions prior to 5.4.189; version 5.4.24 and later versions. |
| CVE-2022-1055 | A use-after-free exists in the Linux Kernel in tc_new_tfilter that could allow a local attacker to gain privilege escalation. The exploit requires unprivileged user namespaces. We recommend upgrading past commit 04c2a47ffb13c29778e2a14e414ad4cb5a5db4b5 |
| CVE-2022-1016 | A flaw was found in the Linux kernel in net/netfilter/nf_tables_core.c:nft_do_chain, which can cause a use-after-free. This issue needs to handle 'return' with proper preconditions, as it can lead to a kernel information leak problem caused by a local, unprivileged attacker. |
| CVE-2022-1015 | A flaw was found in the Linux kernel in linux/net/netfilter/nf_tables_api.c of the netfilter subsystem. This flaw allows a local user to cause an out-of-bounds write issue. |
| CVE-2022-1011 | A use-after-free flaw was found in the Linux kernel’s FUSE filesystem in the way a user triggers write(). This flaw allows a local user to gain unauthorized access to data from the FUSE filesystem, resulting in privilege escalation. |
| CVE-2022-0995 | An out-of-bounds (OOB) memory write flaw was found in the Linux kernel’s watch_queue event notification subsystem. This flaw can overwrite parts of the kernel state, potentially allowing a local user to gain privileged access or cause a denial of service on the system. |
| CVE-2022-0854 | A memory leak flaw was found in the Linux kernel’s DMA subsystem, in the way a user calls DMA_FROM_DEVICE. This flaw allows a local user to read random memory from the kernel space. |
| CVE-2022-0850 | A vulnerability was found in linux kernel, where an information leak occurs via ext4_extent_header to userspace. |
| CVE-2022-0847 | A flaw was found in the way the "flags" member of the new pipe buffer structure was lacking proper initialization in copy_page_to_iter_pipe and push_pipe functions in the Linux kernel and could thus contain stale values. An unprivileged local user could use this flaw to write to pages in the page cache backed by read only files and as such escalate their privileges on the system. |
| CVE-2022-0812 | An information leak flaw was found in NFS over RDMA in the net/sunrpc/xprtrdma/rpc_rdma.c in the Linux Kernel. This flaw allows an attacker with normal user privileges to leak kernel information. |
| CVE-2022-0742 | Memory leak in icmp6 implementation in Linux Kernel 5.13+ allows a remote attacker to DoS a host by making it go out-of-memory via icmp6 packets of type 130 or 131. We recommend upgrading past commit 2d3916f3189172d5c69d33065c3c21119fe539fc. |
| CVE-2022-0646 | A flaw use after free in the Linux kernel Management Component Transport Protocol (MCTP) subsystem was found in the way user triggers cancel_work_sync after the unregister_netdev during removing device. A local user could use this flaw to crash the system or escalate their privileges on the system. It is actual from Linux Kernel 5.17-rc1 (when mctp-serial.c introduced) till 5.17-rc5. |
| CVE-2022-0617 | A flaw null pointer dereference in the Linux kernel UDF file system functionality was found in the way user triggers udf_file_write_iter function for the malicious UDF image. A local user could use this flaw to crash the system. Actual from Linux kernel 4.2-rc1 till 5.17-rc2. |
| CVE-2022-0615 | Use-after-free in eset_rtp kernel module used in ESET products for Linux allows potential attacker to trigger denial-of-service condition on the system. |
| CVE-2022-0516 | A vulnerability was found in kvm_s390_guest_sida_op in the arch/s390/kvm/kvm-s390.c function in KVM for s390 in the Linux kernel. This flaw allows a local attacker with a normal user privilege to obtain unauthorized memory write access. This flaw affects Linux kernel versions prior to 5.17-rc4. |
| CVE-2022-0500 | A flaw was found in unrestricted eBPF usage by the BPF_BTF_LOAD, leading to a possible out-of-bounds memory write in the Linux kernel’s BPF subsystem due to the way a user loads BTF. This flaw allows a local user to crash or escalate their privileges on the system. |
| CVE-2022-0494 | A kernel information leak flaw was identified in the scsi_ioctl function in drivers/scsi/scsi_ioctl.c in the Linux kernel. This flaw allows a local attacker with a special user privilege (CAP_SYS_ADMIN or CAP_SYS_RAWIO) to create issues with confidentiality. |
| CVE-2022-0492 | A vulnerability was found in the Linux kernel’s cgroup_release_agent_write in the kernel/cgroup/cgroup-v1.c function. This flaw, under certain circumstances, allows the use of the cgroups v1 release_agent feature to escalate privileges and bypass the namespace isolation unexpectedly. |
| CVE-2022-0487 | A use-after-free vulnerability was found in rtsx_usb_ms_drv_remove in drivers/memstick/host/rtsx_usb_ms.c in memstick in the Linux kernel. In this flaw, a local attacker with a user privilege may impact system Confidentiality. This flaw affects kernel versions prior to 5.14 rc1. |
| CVE-2022-0480 | A flaw was found in the filelock_init in fs/locks.c function in the Linux kernel. This issue can lead to host memory exhaustion due to memcg not limiting the number of Portable Operating System Interface (POSIX) file locks. |
| CVE-2022-0435 | A stack overflow flaw was found in the Linux kernel's TIPC protocol functionality in the way a user sends a packet with malicious content where the number of domain member nodes is higher than the 64 allowed. This flaw allows a remote user to crash the system or possibly escalate their privileges if they have access to the TIPC network. |
| CVE-2022-0433 | A NULL pointer dereference flaw was found in the Linux kernel's BPF subsystem in the way a user triggers the map_get_next_key function of the BPF bloom filter. This flaw allows a local user to crash the system. This flaw affects Linux kernel versions prior to 5.17-rc1. |
| CVE-2022-0400 | An out-of-bounds read vulnerability was discovered in linux kernel in the smc protocol stack, causing remote dos. |
| CVE-2022-0382 | An information leak flaw was found due to uninitialized memory in the Linux kernel's TIPC protocol subsystem, in the way a user sends a TIPC datagram to one or more destinations. This flaw allows a local user to read some kernel memory. This issue is limited to no more than 7 bytes, and the user cannot control what is read. This flaw affects the Linux kernel versions prior to 5.17-rc1. |
| CVE-2022-0330 | A random memory access flaw was found in the Linux kernel's GPU i915 kernel driver functionality in the way a user may run malicious code on the GPU. This flaw allows a local user to crash the system or escalate their privileges on the system. |
| CVE-2022-0322 | A flaw was found in the sctp_make_strreset_req function in net/sctp/sm_make_chunk.c in the SCTP network protocol in the Linux kernel with a local user privilege access. In this flaw, an attempt to use more buffer than is allocated triggers a BUG_ON issue, leading to a denial of service (DOS). |
| CVE-2022-0286 | A flaw was found in the Linux kernel. A null pointer dereference in bond_ipsec_add_sa() may lead to local denial of service. |
| CVE-2022-0264 | A vulnerability was found in the Linux kernel's eBPF verifier when handling internal data structures. Internal memory locations could be returned to userspace. A local attacker with the permissions to insert eBPF code to the kernel can use this to leak internal kernel memory details defeating some of the exploit mitigations in place for the kernel. This flaws affects kernel versions < v5.16-rc6 |
| CVE-2022-0185 | A heap-based buffer overflow flaw was found in the way the legacy_parse_param function in the Filesystem Context functionality of the Linux kernel verified the supplied parameters length. An unprivileged (in case of unprivileged user namespaces enabled, otherwise needs namespaced CAP_SYS_ADMIN privilege) local user able to open a filesystem that does not support the Filesystem Context API (and thus fallbacks to legacy handling) could use this flaw to escalate their privileges on the system. |
| CVE-2022-0171 | A flaw was found in the Linux kernel. The existing KVM SEV API has a vulnerability that allows a non-root (host) user-level application to crash the host kernel by creating a confidential guest VM instance in AMD CPU that supports Secure Encrypted Virtualization (SEV). |
| CVE-2022-0168 | A denial of service (DOS) issue was found in the Linux kernel’s smb2_ioctl_query_info function in the fs/cifs/smb2ops.c Common Internet File System (CIFS) due to an incorrect return from the memdup_user function. This flaw allows a local, privileged (CAP_SYS_ADMIN) attacker to crash the system. |
| CVE-2021-47624 | In the Linux kernel, the following vulnerability has been resolved: net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change The refcount leak issues take place in an error handling path. When the 3rd argument buf doesn't match with "offline", "online" or "remove", the function simply returns -EINVAL and forgets to decrease the reference count of a rpc_xprt object and a rpc_xprt_switch object increased by rpc_sysfs_xprt_kobj_get_xprt() and rpc_sysfs_xprt_kobj_get_xprt_switch(), causing reference count leaks of both unused objects. Fix this issue by jumping to the error handling path labelled with out_put when buf matches none of "offline", "online" or "remove". |
| CVE-2021-47623 | In the Linux kernel, the following vulnerability has been resolved: powerpc/fixmap: Fix VM debug warning on unmap Unmapping a fixmap entry is done by calling __set_fixmap() with FIXMAP_PAGE_CLEAR as flags. Today, powerpc __set_fixmap() calls map_kernel_page(). map_kernel_page() is not happy when called a second time for the same page. WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/pgtable.c:194 set_pte_at+0xc/0x1e8 CPU: 0 PID: 1 Comm: swapper Not tainted 5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty #682 NIP: c0017cd4 LR: c00187f0 CTR: 00000010 REGS: e1011d50 TRAP: 0700 Not tainted (5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42000208 XER: 00000000 GPR00: c0165fec e1011e10 c14c0000 c0ee2550 ff800000 c0f3d000 00000000 c001686c GPR08: 00001000 b00045a9 00000001 c0f58460 c0f50000 00000000 c0007e10 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 GPR24: 00000000 00000000 c0ee2550 00000000 c0f57000 00000ff8 00000000 ff800000 NIP [c0017cd4] set_pte_at+0xc/0x1e8 LR [c00187f0] map_kernel_page+0x9c/0x100 Call Trace: [e1011e10] [c0736c68] vsnprintf+0x358/0x6c8 (unreliable) [e1011e30] [c0165fec] __set_fixmap+0x30/0x44 [e1011e40] [c0c13bdc] early_iounmap+0x11c/0x170 [e1011e70] [c0c06cb0] ioremap_legacy_serial_console+0x88/0xc0 [e1011e90] [c0c03634] do_one_initcall+0x80/0x178 [e1011ef0] [c0c0385c] kernel_init_freeable+0xb4/0x250 [e1011f20] [c0007e34] kernel_init+0x24/0x140 [e1011f30] [c0016268] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 7fe3fb78 48019689 80010014 7c630034 83e1000c 5463d97e 7c0803a6 38210010 4e800020 81250000 712a0001 41820008 <0fe00000> 9421ffe0 93e1001c 48000030 Implement unmap_kernel_page() which clears an existing pte. |
| CVE-2021-47622 | In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: Fix a deadlock in the error handler The following deadlock has been observed on a test setup: - All tags allocated - The SCSI error handler calls ufshcd_eh_host_reset_handler() - ufshcd_eh_host_reset_handler() queues work that calls ufshcd_err_handler() - ufshcd_err_handler() locks up as follows: Workqueue: ufs_eh_wq_0 ufshcd_err_handler.cfi_jt Call trace: __switch_to+0x298/0x5d8 __schedule+0x6cc/0xa94 schedule+0x12c/0x298 blk_mq_get_tag+0x210/0x480 __blk_mq_alloc_request+0x1c8/0x284 blk_get_request+0x74/0x134 ufshcd_exec_dev_cmd+0x68/0x640 ufshcd_verify_dev_init+0x68/0x35c ufshcd_probe_hba+0x12c/0x1cb8 ufshcd_host_reset_and_restore+0x88/0x254 ufshcd_reset_and_restore+0xd0/0x354 ufshcd_err_handler+0x408/0xc58 process_one_work+0x24c/0x66c worker_thread+0x3e8/0xa4c kthread+0x150/0x1b4 ret_from_fork+0x10/0x30 Fix this lockup by making ufshcd_exec_dev_cmd() allocate a reserved request. |
| CVE-2021-47620 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: refactor malicious adv data check Check for out-of-bound read was being performed at the end of while num_reports loop, and would fill journal with false positives. Added check to beginning of loop processing so that it doesn't get checked after ptr has been advanced. |
| CVE-2021-47619 | In the Linux kernel, the following vulnerability has been resolved: i40e: Fix queues reservation for XDP When XDP was configured on a system with large number of CPUs and X722 NIC there was a call trace with NULL pointer dereference. i40e 0000:87:00.0: failed to get tracking for 256 queues for VSI 0 err -12 i40e 0000:87:00.0: setup of MAIN VSI failed BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:i40e_xdp+0xea/0x1b0 [i40e] Call Trace: ? i40e_reconfig_rss_queues+0x130/0x130 [i40e] dev_xdp_install+0x61/0xe0 dev_xdp_attach+0x18a/0x4c0 dev_change_xdp_fd+0x1e6/0x220 do_setlink+0x616/0x1030 ? ahci_port_stop+0x80/0x80 ? ata_qc_issue+0x107/0x1e0 ? lock_timer_base+0x61/0x80 ? __mod_timer+0x202/0x380 rtnl_setlink+0xe5/0x170 ? bpf_lsm_binder_transaction+0x10/0x10 ? security_capable+0x36/0x50 rtnetlink_rcv_msg+0x121/0x350 ? rtnl_calcit.isra.0+0x100/0x100 netlink_rcv_skb+0x50/0xf0 netlink_unicast+0x1d3/0x2a0 netlink_sendmsg+0x22a/0x440 sock_sendmsg+0x5e/0x60 __sys_sendto+0xf0/0x160 ? __sys_getsockname+0x7e/0xc0 ? _copy_from_user+0x3c/0x80 ? __sys_setsockopt+0xc8/0x1a0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f83fa7a39e0 This was caused by PF queue pile fragmentation due to flow director VSI queue being placed right after main VSI. Because of this main VSI was not able to resize its queue allocation for XDP resulting in no queues allocated for main VSI when XDP was turned on. Fix this by always allocating last queue in PF queue pile for a flow director VSI. |
| CVE-2021-47618 | In the Linux kernel, the following vulnerability has been resolved: ARM: 9170/1: fix panic when kasan and kprobe are enabled arm32 uses software to simulate the instruction replaced by kprobe. some instructions may be simulated by constructing assembly functions. therefore, before executing instruction simulation, it is necessary to construct assembly function execution environment in C language through binding registers. after kasan is enabled, the register binding relationship will be destroyed, resulting in instruction simulation errors and causing kernel panic. the kprobe emulate instruction function is distributed in three files: actions-common.c actions-arm.c actions-thumb.c, so disable KASAN when compiling these files. for example, use kprobe insert on cap_capable+20 after kasan enabled, the cap_capable assembly code is as follows: <cap_capable>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e1a05000 mov r5, r0 e280006c add r0, r0, #108 ; 0x6c e1a04001 mov r4, r1 e1a06002 mov r6, r2 e59fa090 ldr sl, [pc, #144] ; ebfc7bf8 bl c03aa4b4 <__asan_load4> e595706c ldr r7, [r5, #108] ; 0x6c e2859014 add r9, r5, #20 ...... The emulate_ldr assembly code after enabling kasan is as follows: c06f1384 <emulate_ldr>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e282803c add r8, r2, #60 ; 0x3c e1a05000 mov r5, r0 e7e37855 ubfx r7, r5, #16, #4 e1a00008 mov r0, r8 e1a09001 mov r9, r1 e1a04002 mov r4, r2 ebf35462 bl c03c6530 <__asan_load4> e357000f cmp r7, #15 e7e36655 ubfx r6, r5, #12, #4 e205a00f and sl, r5, #15 0a000001 beq c06f13bc <emulate_ldr+0x38> e0840107 add r0, r4, r7, lsl #2 ebf3545c bl c03c6530 <__asan_load4> e084010a add r0, r4, sl, lsl #2 ebf3545a bl c03c6530 <__asan_load4> e2890010 add r0, r9, #16 ebf35458 bl c03c6530 <__asan_load4> e5990010 ldr r0, [r9, #16] e12fff30 blx r0 e356000f cm r6, #15 1a000014 bne c06f1430 <emulate_ldr+0xac> e1a06000 mov r6, r0 e2840040 add r0, r4, #64 ; 0x40 ...... when running in emulate_ldr to simulate the ldr instruction, panic occurred, and the log is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000090 pgd = ecb46400 [00000090] *pgd=2e0fa003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM PC is at cap_capable+0x14/0xb0 LR is at emulate_ldr+0x50/0xc0 psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c r10: 00000000 r9 : c30897f4 r8 : ecd63cd4 r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98 r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 2d546400 DAC: 55555555 Process bash (pid: 1643, stack limit = 0xecd60190) (cap_capable) from (kprobe_handler+0x218/0x340) (kprobe_handler) from (kprobe_trap_handler+0x24/0x48) (kprobe_trap_handler) from (do_undefinstr+0x13c/0x364) (do_undefinstr) from (__und_svc_finish+0x0/0x30) (__und_svc_finish) from (cap_capable+0x18/0xb0) (cap_capable) from (cap_vm_enough_memory+0x38/0x48) (cap_vm_enough_memory) from (security_vm_enough_memory_mm+0x48/0x6c) (security_vm_enough_memory_mm) from (copy_process.constprop.5+0x16b4/0x25c8) (copy_process.constprop.5) from (_do_fork+0xe8/0x55c) (_do_fork) from (SyS_clone+0x1c/0x24) (SyS_clone) from (__sys_trace_return+0x0/0x10) Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7) |
| CVE-2021-47617 | In the Linux kernel, the following vulnerability has been resolved: PCI: pciehp: Fix infinite loop in IRQ handler upon power fault The Power Fault Detected bit in the Slot Status register differs from all other hotplug events in that it is sticky: It can only be cleared after turning off slot power. Per PCIe r5.0, sec. 6.7.1.8: If a power controller detects a main power fault on the hot-plug slot, it must automatically set its internal main power fault latch [...]. The main power fault latch is cleared when software turns off power to the hot-plug slot. The stickiness used to cause interrupt storms and infinite loops which were fixed in 2009 by commits 5651c48cfafe ("PCI pciehp: fix power fault interrupt storm problem") and 99f0169c17f3 ("PCI: pciehp: enable software notification on empty slots"). Unfortunately in 2020 the infinite loop issue was inadvertently reintroduced by commit 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race"): The hardirq handler pciehp_isr() clears the PFD bit until pciehp's power_fault_detected flag is set. That happens in the IRQ thread pciehp_ist(), which never learns of the event because the hardirq handler is stuck in an infinite loop. Fix by setting the power_fault_detected flag already in the hardirq handler. |
| CVE-2021-47616 | In the Linux kernel, the following vulnerability has been resolved: RDMA: Fix use-after-free in rxe_queue_cleanup On error handling path in rxe_qp_from_init() qp->sq.queue is freed and then rxe_create_qp() will drop last reference to this object. qp clean up function will try to free this queue one time and it causes UAF bug. Fix it by zeroing queue pointer after freeing queue in rxe_qp_from_init(). |
| CVE-2021-47615 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix releasing unallocated memory in dereg MR flow For the case of IB_MR_TYPE_DM the mr does doesn't have a umem, even though it is a user MR. This causes function mlx5_free_priv_descs() to think that it is a kernel MR, leading to wrongly accessing mr->descs that will get wrong values in the union which leads to attempt to release resources that were not allocated in the first place. For example: DMA-API: mlx5_core 0000:08:00.1: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=0 bytes] WARNING: CPU: 8 PID: 1021 at kernel/dma/debug.c:961 check_unmap+0x54f/0x8b0 RIP: 0010:check_unmap+0x54f/0x8b0 Call Trace: debug_dma_unmap_page+0x57/0x60 mlx5_free_priv_descs+0x57/0x70 [mlx5_ib] mlx5_ib_dereg_mr+0x1fb/0x3d0 [mlx5_ib] ib_dereg_mr_user+0x60/0x140 [ib_core] uverbs_destroy_uobject+0x59/0x210 [ib_uverbs] uobj_destroy+0x3f/0x80 [ib_uverbs] ib_uverbs_cmd_verbs+0x435/0xd10 [ib_uverbs] ? uverbs_finalize_object+0x50/0x50 [ib_uverbs] ? lock_acquire+0xc4/0x2e0 ? lock_acquired+0x12/0x380 ? lock_acquire+0xc4/0x2e0 ? lock_acquire+0xc4/0x2e0 ? ib_uverbs_ioctl+0x7c/0x140 [ib_uverbs] ? lock_release+0x28a/0x400 ib_uverbs_ioctl+0xc0/0x140 [ib_uverbs] ? ib_uverbs_ioctl+0x7c/0x140 [ib_uverbs] __x64_sys_ioctl+0x7f/0xb0 do_syscall_64+0x38/0x90 Fix it by reorganizing the dereg flow and mlx5_ib_mr structure: - Move the ib_umem field into the user MRs structure in the union as it's applicable only there. - Function mlx5_ib_dereg_mr() will now call mlx5_free_priv_descs() only in case there isn't udata, which indicates that this isn't a user MR. |
| CVE-2021-47614 | In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix a user-after-free in add_pble_prm When irdma_hmc_sd_one fails, 'chunk' is freed while its still on the PBLE info list. Add the chunk entry to the PBLE info list only after successful setting of the SD in irdma_hmc_sd_one. |
| CVE-2021-47613 | In the Linux kernel, the following vulnerability has been resolved: i2c: virtio: fix completion handling The driver currently assumes that the notify callback is only received when the device is done with all the queued buffers. However, this is not true, since the notify callback could be called without any of the queued buffers being completed (for example, with virtio-pci and shared interrupts) or with only some of the buffers being completed (since the driver makes them available to the device in multiple separate virtqueue_add_sgs() calls). This can lead to incorrect data on the I2C bus or memory corruption in the guest if the device operates on buffers which are have been freed by the driver. (The WARN_ON in the driver is also triggered.) BUG kmalloc-128 (Tainted: G W ): Poison overwritten First byte 0x0 instead of 0x6b Allocated in i2cdev_ioctl_rdwr+0x9d/0x1de age=243 cpu=0 pid=28 memdup_user+0x2e/0xbd i2cdev_ioctl_rdwr+0x9d/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Freed in i2cdev_ioctl_rdwr+0x1bb/0x1de age=68 cpu=0 pid=28 kfree+0x1bd/0x1cc i2cdev_ioctl_rdwr+0x1bb/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Fix this by calling virtio_get_buf() from the notify handler like other virtio drivers and by actually waiting for all the buffers to be completed. |
| CVE-2021-47612 | In the Linux kernel, the following vulnerability has been resolved: nfc: fix segfault in nfc_genl_dump_devices_done When kmalloc in nfc_genl_dump_devices() fails then nfc_genl_dump_devices_done() segfaults as below KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 25 Comm: kworker/0:1 Not tainted 5.16.0-rc4-01180-g2a987e65025e-dirty #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-6.fc35 04/01/2014 Workqueue: events netlink_sock_destruct_work RIP: 0010:klist_iter_exit+0x26/0x80 Call Trace: <TASK> class_dev_iter_exit+0x15/0x20 nfc_genl_dump_devices_done+0x3b/0x50 genl_lock_done+0x84/0xd0 netlink_sock_destruct+0x8f/0x270 __sk_destruct+0x64/0x3b0 sk_destruct+0xa8/0xd0 __sk_free+0x2e8/0x3d0 sk_free+0x51/0x90 netlink_sock_destruct_work+0x1c/0x20 process_one_work+0x411/0x710 worker_thread+0x6fd/0xa80 |
| CVE-2021-47611 | In the Linux kernel, the following vulnerability has been resolved: mac80211: validate extended element ID is present Before attempting to parse an extended element, verify that the extended element ID is present. |
| CVE-2021-47610 | In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null ptr access msm_ioctl_gem_submit() Fix the below null pointer dereference in msm_ioctl_gem_submit(): 26545.260705: Call trace: 26545.263223: kref_put+0x1c/0x60 26545.266452: msm_ioctl_gem_submit+0x254/0x744 26545.270937: drm_ioctl_kernel+0xa8/0x124 26545.274976: drm_ioctl+0x21c/0x33c 26545.278478: drm_compat_ioctl+0xdc/0xf0 26545.282428: __arm64_compat_sys_ioctl+0xc8/0x100 26545.287169: el0_svc_common+0xf8/0x250 26545.291025: do_el0_svc_compat+0x28/0x54 26545.295066: el0_svc_compat+0x10/0x1c 26545.298838: el0_sync_compat_handler+0xa8/0xcc 26545.303403: el0_sync_compat+0x188/0x1c0 26545.307445: Code: d503201f d503201f 52800028 4b0803e8 (b8680008) 26545.318799: Kernel panic - not syncing: Oops: Fatal exception |
| CVE-2021-47609 | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Fix string overflow in SCPI genpd driver Without the bound checks for scpi_pd->name, it could result in the buffer overflow when copying the SCPI device name from the corresponding device tree node as the name string is set at maximum size of 30. Let us fix it by using devm_kasprintf so that the string buffer is allocated dynamically. |
| CVE-2021-47608 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kernel address leakage in atomic fetch The change in commit 37086bfdc737 ("bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCH") around check_mem_access() handling is buggy since this would allow for unprivileged users to leak kernel pointers. For example, an atomic fetch/and with -1 on a stack destination which holds a spilled pointer will migrate the spilled register type into a scalar, which can then be exported out of the program (since scalar != pointer) by dumping it into a map value. The original implementation of XADD was preventing this situation by using a double call to check_mem_access() one with BPF_READ and a subsequent one with BPF_WRITE, in both cases passing -1 as a placeholder value instead of register as per XADD semantics since it didn't contain a value fetch. The BPF_READ also included a check in check_stack_read_fixed_off() which rejects the program if the stack slot is of __is_pointer_value() if dst_regno < 0. The latter is to distinguish whether we're dealing with a regular stack spill/ fill or some arithmetical operation which is disallowed on non-scalars, see also 6e7e63cbb023 ("bpf: Forbid XADD on spilled pointers for unprivileged users") for more context on check_mem_access() and its handling of placeholder value -1. One minimally intrusive option to fix the leak is for the BPF_FETCH case to initially check the BPF_READ case via check_mem_access() with -1 as register, followed by the actual load case with non-negative load_reg to propagate stack bounds to registers. |
| CVE-2021-47607 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kernel address leakage in atomic cmpxchg's r0 aux reg The implementation of BPF_CMPXCHG on a high level has the following parameters: .-[old-val] .-[new-val] BPF_R0 = cmpxchg{32,64}(DST_REG + insn->off, BPF_R0, SRC_REG) `-[mem-loc] `-[old-val] Given a BPF insn can only have two registers (dst, src), the R0 is fixed and used as an auxilliary register for input (old value) as well as output (returning old value from memory location). While the verifier performs a number of safety checks, it misses to reject unprivileged programs where R0 contains a pointer as old value. Through brute-forcing it takes about ~16sec on my machine to leak a kernel pointer with BPF_CMPXCHG. The PoC is basically probing for kernel addresses by storing the guessed address into the map slot as a scalar, and using the map value pointer as R0 while SRC_REG has a canary value to detect a matching address. Fix it by checking R0 for pointers, and reject if that's the case for unprivileged programs. |
| CVE-2021-47606 | In the Linux kernel, the following vulnerability has been resolved: net: netlink: af_netlink: Prevent empty skb by adding a check on len. Adding a check on len parameter to avoid empty skb. This prevents a division error in netem_enqueue function which is caused when skb->len=0 and skb->data_len=0 in the randomized corruption step as shown below. skb->data[prandom_u32() % skb_headlen(skb)] ^= 1<<(prandom_u32() % 8); Crash Report: [ 343.170349] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0 [ 343.216110] netem: version 1.3 [ 343.235841] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 343.236680] CPU: 3 PID: 4288 Comm: reproducer Not tainted 5.16.0-rc1+ [ 343.237569] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 [ 343.238707] RIP: 0010:netem_enqueue+0x1590/0x33c0 [sch_netem] [ 343.239499] Code: 89 85 58 ff ff ff e8 5f 5d e9 d3 48 8b b5 48 ff ff ff 8b 8d 50 ff ff ff 8b 85 58 ff ff ff 48 8b bd 70 ff ff ff 31 d2 2b 4f 74 <f7> f1 48 b8 00 00 00 00 00 fc ff df 49 01 d5 4c 89 e9 48 c1 e9 03 [ 343.241883] RSP: 0018:ffff88800bcd7368 EFLAGS: 00010246 [ 343.242589] RAX: 00000000ba7c0a9c RBX: 0000000000000001 RCX: 0000000000000000 [ 343.243542] RDX: 0000000000000000 RSI: ffff88800f8edb10 RDI: ffff88800f8eda40 [ 343.244474] RBP: ffff88800bcd7458 R08: 0000000000000000 R09: ffffffff94fb8445 [ 343.245403] R10: ffffffff94fb8336 R11: ffffffff94fb8445 R12: 0000000000000000 [ 343.246355] R13: ffff88800a5a7000 R14: ffff88800a5b5800 R15: 0000000000000020 [ 343.247291] FS: 00007fdde2bd7700(0000) GS:ffff888109780000(0000) knlGS:0000000000000000 [ 343.248350] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 343.249120] CR2: 00000000200000c0 CR3: 000000000ef4c000 CR4: 00000000000006e0 [ 343.250076] Call Trace: [ 343.250423] <TASK> [ 343.250713] ? memcpy+0x4d/0x60 [ 343.251162] ? netem_init+0xa0/0xa0 [sch_netem] [ 343.251795] ? __sanitizer_cov_trace_pc+0x21/0x60 [ 343.252443] netem_enqueue+0xe28/0x33c0 [sch_netem] [ 343.253102] ? stack_trace_save+0x87/0xb0 [ 343.253655] ? filter_irq_stacks+0xb0/0xb0 [ 343.254220] ? netem_init+0xa0/0xa0 [sch_netem] [ 343.254837] ? __kasan_check_write+0x14/0x20 [ 343.255418] ? _raw_spin_lock+0x88/0xd6 [ 343.255953] dev_qdisc_enqueue+0x50/0x180 [ 343.256508] __dev_queue_xmit+0x1a7e/0x3090 [ 343.257083] ? netdev_core_pick_tx+0x300/0x300 [ 343.257690] ? check_kcov_mode+0x10/0x40 [ 343.258219] ? _raw_spin_unlock_irqrestore+0x29/0x40 [ 343.258899] ? __kasan_init_slab_obj+0x24/0x30 [ 343.259529] ? setup_object.isra.71+0x23/0x90 [ 343.260121] ? new_slab+0x26e/0x4b0 [ 343.260609] ? kasan_poison+0x3a/0x50 [ 343.261118] ? kasan_unpoison+0x28/0x50 [ 343.261637] ? __kasan_slab_alloc+0x71/0x90 [ 343.262214] ? memcpy+0x4d/0x60 [ 343.262674] ? write_comp_data+0x2f/0x90 [ 343.263209] ? __kasan_check_write+0x14/0x20 [ 343.263802] ? __skb_clone+0x5d6/0x840 [ 343.264329] ? __sanitizer_cov_trace_pc+0x21/0x60 [ 343.264958] dev_queue_xmit+0x1c/0x20 [ 343.265470] netlink_deliver_tap+0x652/0x9c0 [ 343.266067] netlink_unicast+0x5a0/0x7f0 [ 343.266608] ? netlink_attachskb+0x860/0x860 [ 343.267183] ? __sanitizer_cov_trace_pc+0x21/0x60 [ 343.267820] ? write_comp_data+0x2f/0x90 [ 343.268367] netlink_sendmsg+0x922/0xe80 [ 343.268899] ? netlink_unicast+0x7f0/0x7f0 [ 343.269472] ? __sanitizer_cov_trace_pc+0x21/0x60 [ 343.270099] ? write_comp_data+0x2f/0x90 [ 343.270644] ? netlink_unicast+0x7f0/0x7f0 [ 343.271210] sock_sendmsg+0x155/0x190 [ 343.271721] ____sys_sendmsg+0x75f/0x8f0 [ 343.272262] ? kernel_sendmsg+0x60/0x60 [ 343.272788] ? write_comp_data+0x2f/0x90 [ 343.273332] ? write_comp_data+0x2f/0x90 [ 343.273869] ___sys_sendmsg+0x10f/0x190 [ 343.274405] ? sendmsg_copy_msghdr+0x80/0x80 [ 343.274984] ? slab_post_alloc_hook+0x70/0x230 [ 343.275597] ? futex_wait_setup+0x240/0x240 [ 343.276175] ? security_file_alloc+0x3e/0x170 [ 343.276779] ? write_comp_d ---truncated--- |
| CVE-2021-47605 | In the Linux kernel, the following vulnerability has been resolved: vduse: fix memory corruption in vduse_dev_ioctl() The "config.offset" comes from the user. There needs to a check to prevent it being out of bounds. The "config.offset" and "dev->config_size" variables are both type u32. So if the offset if out of bounds then the "dev->config_size - config.offset" subtraction results in a very high u32 value. The out of bounds offset can result in memory corruption. |
| CVE-2021-47604 | In the Linux kernel, the following vulnerability has been resolved: vduse: check that offset is within bounds in get_config() This condition checks "len" but it does not check "offset" and that could result in an out of bounds read if "offset > dev->config_size". The problem is that since both variables are unsigned the "dev->config_size - offset" subtraction would result in a very high unsigned value. I think these checks might not be necessary because "len" and "offset" are supposed to already have been validated using the vhost_vdpa_config_validate() function. But I do not know the code perfectly, and I like to be safe. |
| CVE-2021-47603 | In the Linux kernel, the following vulnerability has been resolved: audit: improve robustness of the audit queue handling If the audit daemon were ever to get stuck in a stopped state the kernel's kauditd_thread() could get blocked attempting to send audit records to the userspace audit daemon. With the kernel thread blocked it is possible that the audit queue could grow unbounded as certain audit record generating events must be exempt from the queue limits else the system enter a deadlock state. This patch resolves this problem by lowering the kernel thread's socket sending timeout from MAX_SCHEDULE_TIMEOUT to HZ/10 and tweaks the kauditd_send_queue() function to better manage the various audit queues when connection problems occur between the kernel and the audit daemon. With this patch, the backlog may temporarily grow beyond the defined limits when the audit daemon is stopped and the system is under heavy audit pressure, but kauditd_thread() will continue to make progress and drain the queues as it would for other connection problems. For example, with the audit daemon put into a stopped state and the system configured to audit every syscall it was still possible to shutdown the system without a kernel panic, deadlock, etc.; granted, the system was slow to shutdown but that is to be expected given the extreme pressure of recording every syscall. The timeout value of HZ/10 was chosen primarily through experimentation and this developer's "gut feeling". There is likely no one perfect value, but as this scenario is limited in scope (root privileges would be needed to send SIGSTOP to the audit daemon), it is likely not worth exposing this as a tunable at present. This can always be done at a later date if it proves necessary. |
| CVE-2021-47602 | In the Linux kernel, the following vulnerability has been resolved: mac80211: track only QoS data frames for admission control For admission control, obviously all of that only works for QoS data frames, otherwise we cannot even access the QoS field in the header. Syzbot reported (see below) an uninitialized value here due to a status of a non-QoS nullfunc packet, which isn't even long enough to contain the QoS header. Fix this to only do anything for QoS data packets. |
| CVE-2021-47601 | In the Linux kernel, the following vulnerability has been resolved: tee: amdtee: fix an IS_ERR() vs NULL bug The __get_free_pages() function does not return error pointers it returns NULL so fix this condition to avoid a NULL dereference. |
| CVE-2021-47600 | In the Linux kernel, the following vulnerability has been resolved: dm btree remove: fix use after free in rebalance_children() Move dm_tm_unlock() after dm_tm_dec(). |
| CVE-2021-47599 | In the Linux kernel, the following vulnerability has been resolved: btrfs: use latest_dev in btrfs_show_devname The test case btrfs/238 reports the warning below: WARNING: CPU: 3 PID: 481 at fs/btrfs/super.c:2509 btrfs_show_devname+0x104/0x1e8 [btrfs] CPU: 2 PID: 1 Comm: systemd Tainted: G W O 5.14.0-rc1-custom #72 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: btrfs_show_devname+0x108/0x1b4 [btrfs] show_mountinfo+0x234/0x2c4 m_show+0x28/0x34 seq_read_iter+0x12c/0x3c4 vfs_read+0x29c/0x2c8 ksys_read+0x80/0xec __arm64_sys_read+0x28/0x34 invoke_syscall+0x50/0xf8 do_el0_svc+0x88/0x138 el0_svc+0x2c/0x8c el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x198/0x19c Reason: While btrfs_prepare_sprout() moves the fs_devices::devices into fs_devices::seed_list, the btrfs_show_devname() searches for the devices and found none, leading to the warning as in above. Fix: latest_dev is updated according to the changes to the device list. That means we could use the latest_dev->name to show the device name in /proc/self/mounts, the pointer will be always valid as it's assigned before the device is deleted from the list in remove or replace. The RCU protection is sufficient as the device structure is freed after synchronization. |
| CVE-2021-47598 | In the Linux kernel, the following vulnerability has been resolved: sch_cake: do not call cake_destroy() from cake_init() qdiscs are not supposed to call their own destroy() method from init(), because core stack already does that. syzbot was able to trigger use after free: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock_common kernel/locking/mutex.c:586 [inline] WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740 Modules linked in: CPU: 0 PID: 21902 Comm: syz-executor189 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__mutex_lock_common kernel/locking/mutex.c:586 [inline] RIP: 0010:__mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740 Code: 08 84 d2 0f 85 19 08 00 00 8b 05 97 38 4b 04 85 c0 0f 85 27 f7 ff ff 48 c7 c6 20 00 ac 89 48 c7 c7 a0 fe ab 89 e8 bf 76 ba ff <0f> 0b e9 0d f7 ff ff 48 8b 44 24 40 48 8d b8 c8 08 00 00 48 89 f8 RSP: 0018:ffffc9000627f290 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802315d700 RSI: ffffffff815f1db8 RDI: fffff52000c4fe44 RBP: ffff88818f28e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815ebb5e R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: ffffc9000627f458 R15: 0000000093c30000 FS: 0000555556abc400(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fda689c3303 CR3: 000000001cfbb000 CR4: 0000000000350ef0 Call Trace: <TASK> tcf_chain0_head_change_cb_del+0x2e/0x3d0 net/sched/cls_api.c:810 tcf_block_put_ext net/sched/cls_api.c:1381 [inline] tcf_block_put_ext net/sched/cls_api.c:1376 [inline] tcf_block_put+0xbc/0x130 net/sched/cls_api.c:1394 cake_destroy+0x3f/0x80 net/sched/sch_cake.c:2695 qdisc_create.constprop.0+0x9da/0x10f0 net/sched/sch_api.c:1293 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1bb06badb9 Code: Unable to access opcode bytes at RIP 0x7f1bb06bad8f. RSP: 002b:00007fff3012a658 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1bb06badb9 RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000003 R11: 0000000000000246 R12: 00007fff3012a688 R13: 00007fff3012a6a0 R14: 00007fff3012a6e0 R15: 00000000000013c2 </TASK> |
| CVE-2021-47597 | In the Linux kernel, the following vulnerability has been resolved: inet_diag: fix kernel-infoleak for UDP sockets KMSAN reported a kernel-infoleak [1], that can exploited by unpriv users. After analysis it turned out UDP was not initializing r->idiag_expires. Other users of inet_sk_diag_fill() might make the same mistake in the future, so fix this in inet_sk_diag_fill(). [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:156 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670 instrument_copy_to_user include/linux/instrumented.h:121 [inline] copyout lib/iov_iter.c:156 [inline] _copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670 copy_to_iter include/linux/uio.h:155 [inline] simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519 __skb_datagram_iter+0x2cb/0x1280 net/core/datagram.c:425 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533 skb_copy_datagram_msg include/linux/skbuff.h:3657 [inline] netlink_recvmsg+0x660/0x1c60 net/netlink/af_netlink.c:1974 sock_recvmsg_nosec net/socket.c:944 [inline] sock_recvmsg net/socket.c:962 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1035 call_read_iter include/linux/fs.h:2156 [inline] new_sync_read fs/read_write.c:400 [inline] vfs_read+0x1631/0x1980 fs/read_write.c:481 ksys_read+0x28c/0x520 fs/read_write.c:619 __do_sys_read fs/read_write.c:629 [inline] __se_sys_read fs/read_write.c:627 [inline] __x64_sys_read+0xdb/0x120 fs/read_write.c:627 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] netlink_dump+0x3d5/0x16a0 net/netlink/af_netlink.c:2245 __netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:254 [inline] inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1343 sock_diag_rcv_msg+0x24a/0x620 netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:276 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] sock_write_iter+0x594/0x690 net/socket.c:1057 do_iter_readv_writev+0xa7f/0xc70 do_iter_write+0x52c/0x1500 fs/read_write.c:851 vfs_writev fs/read_write.c:924 [inline] do_writev+0x63f/0xe30 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Bytes 68-71 of 312 are uninitialized Memory access of size 312 starts at ffff88812ab54000 Data copied to user address 0000000020001440 CPU: 1 PID: 6365 Comm: syz-executor801 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 |
| CVE-2021-47596 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix use-after-free bug in hclgevf_send_mbx_msg Currently, the hns3_remove function firstly uninstall client instance, and then uninstall acceletion engine device. The netdevice is freed in client instance uninstall process, but acceletion engine device uninstall process still use it to trace runtime information. This causes a use after free problem. So fixes it by check the instance register state to avoid use after free. |
| CVE-2021-47595 | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_ets: don't remove idle classes from the round-robin list Shuang reported that the following script: 1) tc qdisc add dev ddd0 handle 10: parent 1: ets bands 8 strict 4 priomap 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 2) mausezahn ddd0 -A 10.10.10.1 -B 10.10.10.2 -c 0 -a own -b 00:c1:a0:c1:a0:00 -t udp & 3) tc qdisc change dev ddd0 handle 10: ets bands 4 strict 2 quanta 2500 2500 priomap 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 crashes systematically when line 2) is commented: list_del corruption, ffff8e028404bd30->next is LIST_POISON1 (dead000000000100) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 954 Comm: tc Not tainted 5.16.0-rc4+ #478 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000682f48 CR3: 00000001058be000 CR4: 0000000000350ef0 Call Trace: <TASK> ets_qdisc_change+0x58b/0xa70 [sch_ets] tc_modify_qdisc+0x323/0x880 rtnetlink_rcv_msg+0x169/0x4a0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1a5/0x280 netlink_sendmsg+0x257/0x4d0 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1f2/0x260 ___sys_sendmsg+0x7c/0xc0 __sys_sendmsg+0x57/0xa0 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7efdc8031338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffdf1ce9828 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000061b37a97 RCX: 00007efdc8031338 RDX: 0000000000000000 RSI: 00007ffdf1ce9890 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000078a940 R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000688880 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev pcspkr i2c_i801 virtio_balloon i2c_smbus lpc_ich ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel serio_raw ghash_clmulni_intel ahci libahci libata virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: sch_ets] ---[ end trace f35878d1912655c2 ]--- RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000 ---truncated--- |
| CVE-2021-47594 | In the Linux kernel, the following vulnerability has been resolved: mptcp: never allow the PM to close a listener subflow Currently, when deleting an endpoint the netlink PM treverses all the local MPTCP sockets, regardless of their status. If an MPTCP listener socket is bound to the IP matching the delete endpoint, the listener TCP socket will be closed. That is unexpected, the PM should only affect data subflows. Additionally, syzbot was able to trigger a NULL ptr dereference due to the above: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 6550 Comm: syz-executor122 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xd7d/0x54a0 kernel/locking/lockdep.c:4897 Code: 0f 0e 41 be 01 00 00 00 0f 86 c8 00 00 00 89 05 69 cc 0f 0e e9 bd 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 0f 85 f3 2f 00 00 48 81 3b 20 75 17 8f 0f 84 52 f3 ff RSP: 0018:ffffc90001f2f818 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000018 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000a R12: 0000000000000000 R13: ffff88801b98d700 R14: 0000000000000000 R15: 0000000000000001 FS: 00007f177cd3d700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f177cd1b268 CR3: 000000001dd55000 CR4: 0000000000350ee0 Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5637 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5602 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x39/0x50 kernel/locking/spinlock.c:162 finish_wait+0xc0/0x270 kernel/sched/wait.c:400 inet_csk_wait_for_connect net/ipv4/inet_connection_sock.c:464 [inline] inet_csk_accept+0x7de/0x9d0 net/ipv4/inet_connection_sock.c:497 mptcp_accept+0xe5/0x500 net/mptcp/protocol.c:2865 inet_accept+0xe4/0x7b0 net/ipv4/af_inet.c:739 mptcp_stream_accept+0x2e7/0x10e0 net/mptcp/protocol.c:3345 do_accept+0x382/0x510 net/socket.c:1773 __sys_accept4_file+0x7e/0xe0 net/socket.c:1816 __sys_accept4+0xb0/0x100 net/socket.c:1846 __do_sys_accept net/socket.c:1864 [inline] __se_sys_accept net/socket.c:1861 [inline] __x64_sys_accept+0x71/0xb0 net/socket.c:1861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f177cd8b8e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f177cd3d308 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 00007f177ce13408 RCX: 00007f177cd8b8e9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f177ce13400 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f177ce1340c R13: 00007f177cde1004 R14: 6d705f706374706d R15: 0000000000022000 </TASK> Fix the issue explicitly skipping MPTCP socket in TCP_LISTEN status. |
| CVE-2021-47593 | In the Linux kernel, the following vulnerability has been resolved: mptcp: clear 'kern' flag from fallback sockets The mptcp ULP extension relies on sk->sk_sock_kern being set correctly: It prevents setsockopt(fd, IPPROTO_TCP, TCP_ULP, "mptcp", 6); from working for plain tcp sockets (any userspace-exposed socket). But in case of fallback, accept() can return a plain tcp sk. In such case, sk is still tagged as 'kernel' and setsockopt will work. This will crash the kernel, The subflow extension has a NULL ctx->conn mptcp socket: BUG: KASAN: null-ptr-deref in subflow_data_ready+0x181/0x2b0 Call Trace: tcp_data_ready+0xf8/0x370 [..] |
| CVE-2021-47592 | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix tc flower deletion for VLAN priority Rx steering To replicate the issue:- 1) Add 1 flower filter for VLAN Priority based frame steering:- $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \ flower vlan_prio 0 hw_tc 0 2) Get the 'pref' id $ tc filter show dev $IFDEVNAME ingress 3) Delete a specific tc flower record (say pref 49151) $ tc filter del dev $IFDEVNAME parent ffff: pref 49151 From dmesg, we will observe kernel NULL pointer ooops [ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 197.171367] #PF: supervisor read access in kernel mode [ 197.171367] #PF: error_code(0x0000) - not-present page [ 197.171367] PGD 0 P4D 0 [ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI <snip> [ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac] <snip> [ 197.171367] Call Trace: [ 197.171367] <TASK> [ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac] [ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac] [ 197.171367] tc_setup_cb_destroy+0xb3/0x180 [ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] The above issue is due to previous incorrect implementation of tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule() to get struct flow_rule *rule which is no longer valid for tc filter delete operation. struct flow_rule *rule = flow_cls_offload_flow_rule(cls); struct flow_dissector *dissector = rule->match.dissector; So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(), this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload record for 'RX frame steering' tc flower, currently used for VLAN priority. The implementation has taken consideration for future extension to include other type RX frame steering such as EtherType based. v2: - Clean up overly extensive backtrace and rewrite git message to better explain the kernel NULL pointer issue. |
| CVE-2021-47591 | In the Linux kernel, the following vulnerability has been resolved: mptcp: remove tcp ulp setsockopt support TCP_ULP setsockopt cannot be used for mptcp because its already used internally to plumb subflow (tcp) sockets to the mptcp layer. syzbot managed to trigger a crash for mptcp connections that are in fallback mode: KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 1 PID: 1083 Comm: syz-executor.3 Not tainted 5.16.0-rc2-syzkaller #0 RIP: 0010:tls_build_proto net/tls/tls_main.c:776 [inline] [..] __tcp_set_ulp net/ipv4/tcp_ulp.c:139 [inline] tcp_set_ulp+0x428/0x4c0 net/ipv4/tcp_ulp.c:160 do_tcp_setsockopt+0x455/0x37c0 net/ipv4/tcp.c:3391 mptcp_setsockopt+0x1b47/0x2400 net/mptcp/sockopt.c:638 Remove support for TCP_ULP setsockopt. |
| CVE-2021-47590 | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix deadlock in __mptcp_push_pending() __mptcp_push_pending() may call mptcp_flush_join_list() with subflow socket lock held. If such call hits mptcp_sockopt_sync_all() then subsequently __mptcp_sockopt_sync() could try to lock the subflow socket for itself, causing a deadlock. sysrq: Show Blocked State task:ss-server state:D stack: 0 pid: 938 ppid: 1 flags:0x00000000 Call Trace: <TASK> __schedule+0x2d6/0x10c0 ? __mod_memcg_state+0x4d/0x70 ? csum_partial+0xd/0x20 ? _raw_spin_lock_irqsave+0x26/0x50 schedule+0x4e/0xc0 __lock_sock+0x69/0x90 ? do_wait_intr_irq+0xa0/0xa0 __lock_sock_fast+0x35/0x50 mptcp_sockopt_sync_all+0x38/0xc0 __mptcp_push_pending+0x105/0x200 mptcp_sendmsg+0x466/0x490 sock_sendmsg+0x57/0x60 __sys_sendto+0xf0/0x160 ? do_wait_intr_irq+0xa0/0xa0 ? fpregs_restore_userregs+0x12/0xd0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9ba546c2d0 RSP: 002b:00007ffdc3b762d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f9ba56c8060 RCX: 00007f9ba546c2d0 RDX: 000000000000077a RSI: 0000000000e5e180 RDI: 0000000000000234 RBP: 0000000000cc57f0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9ba56c8060 R13: 0000000000b6ba60 R14: 0000000000cc7840 R15: 41d8685b1d7901b8 </TASK> Fix the issue by using __mptcp_flush_join_list() instead of plain mptcp_flush_join_list() inside __mptcp_push_pending(), as suggested by Florian. The sockopt sync will be deferred to the workqueue. |
| CVE-2021-47589 | In the Linux kernel, the following vulnerability has been resolved: igbvf: fix double free in `igbvf_probe` In `igbvf_probe`, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is `list_for_each_entry_safe` and `netif_napi_del` which aims to delete all entries in `dev->napi_list`. The program has added an entry `adapter->rx_ring->napi` which is added by `netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF. In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before `adapter->rx_ring`. The KASAN logs are as follows: [ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450 [ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366 [ 35.128360] [ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14 [ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 35.131749] Call Trace: [ 35.132199] dump_stack_lvl+0x59/0x7b [ 35.132865] print_address_description+0x7c/0x3b0 [ 35.133707] ? free_netdev+0x1fd/0x450 [ 35.134378] __kasan_report+0x160/0x1c0 [ 35.135063] ? free_netdev+0x1fd/0x450 [ 35.135738] kasan_report+0x4b/0x70 [ 35.136367] free_netdev+0x1fd/0x450 [ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf] [ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf] [ 35.138751] local_pci_probe+0x13c/0x1f0 [ 35.139461] pci_device_probe+0x37e/0x6c0 [ 35.165526] [ 35.165806] Allocated by task 366: [ 35.166414] ____kasan_kmalloc+0xc4/0xf0 [ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf] [ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf] [ 35.168866] local_pci_probe+0x13c/0x1f0 [ 35.169565] pci_device_probe+0x37e/0x6c0 [ 35.179713] [ 35.179993] Freed by task 366: [ 35.180539] kasan_set_track+0x4c/0x80 [ 35.181211] kasan_set_free_info+0x1f/0x40 [ 35.181942] ____kasan_slab_free+0x103/0x140 [ 35.182703] kfree+0xe3/0x250 [ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf] [ 35.184040] local_pci_probe+0x13c/0x1f0 |
| CVE-2021-47588 | In the Linux kernel, the following vulnerability has been resolved: sit: do not call ipip6_dev_free() from sit_init_net() ipip6_dev_free is sit dev->priv_destructor, already called by register_netdevice() if something goes wrong. Alternative would be to make ipip6_dev_free() robust against multiple invocations, but other drivers do not implement this strategy. syzbot reported: dst_release underflow WARNING: CPU: 0 PID: 5059 at net/core/dst.c:173 dst_release+0xd8/0xe0 net/core/dst.c:173 Modules linked in: CPU: 1 PID: 5059 Comm: syz-executor.4 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:dst_release+0xd8/0xe0 net/core/dst.c:173 Code: 4c 89 f2 89 d9 31 c0 5b 41 5e 5d e9 da d5 44 f9 e8 1d 90 5f f9 c6 05 87 48 c6 05 01 48 c7 c7 80 44 99 8b 31 c0 e8 e8 67 29 f9 <0f> 0b eb 85 0f 1f 40 00 53 48 89 fb e8 f7 8f 5f f9 48 83 c3 a8 48 RSP: 0018:ffffc9000aa5faa0 EFLAGS: 00010246 RAX: d6894a925dd15a00 RBX: 00000000ffffffff RCX: 0000000000040000 RDX: ffffc90005e19000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 0000000000000000 R08: ffffffff816a1f42 R09: ffffed1017344f2c R10: ffffed1017344f2c R11: 0000000000000000 R12: 0000607f462b1358 R13: 1ffffffff1bfd305 R14: ffffe8ffffcb1358 R15: dffffc0000000000 FS: 00007f66c71a2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88aaed5058 CR3: 0000000023e0f000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dst_cache_destroy+0x107/0x1e0 net/core/dst_cache.c:160 ipip6_dev_free net/ipv6/sit.c:1414 [inline] sit_init_net+0x229/0x550 net/ipv6/sit.c:1936 ops_init+0x313/0x430 net/core/net_namespace.c:140 setup_net+0x35b/0x9d0 net/core/net_namespace.c:326 copy_net_ns+0x359/0x5c0 net/core/net_namespace.c:470 create_new_namespaces+0x4ce/0xa00 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x11e/0x180 kernel/nsproxy.c:226 ksys_unshare+0x57d/0xb50 kernel/fork.c:3075 __do_sys_unshare kernel/fork.c:3146 [inline] __se_sys_unshare kernel/fork.c:3144 [inline] __x64_sys_unshare+0x34/0x40 kernel/fork.c:3144 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f66c882ce99 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f66c71a2168 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f66c893ff60 RCX: 00007f66c882ce99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000048040200 RBP: 00007f66c8886ff1 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff6634832f R14: 00007f66c71a2300 R15: 0000000000022000 </TASK> |
| CVE-2021-47587 | In the Linux kernel, the following vulnerability has been resolved: net: systemport: Add global locking for descriptor lifecycle The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. |
| CVE-2021-47586 | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup KASAN reports an out-of-bounds read in rk_gmac_setup on the line: while (ops->regs[i]) { This happens for most platforms since the regs flexible array member is empty, so the memory after the ops structure is being read here. It seems that mostly this happens to contain zero anyway, so we get lucky and everything still works. To avoid adding redundant data to nearly all the ops structures, add a new flag to indicate whether the regs field is valid and avoid this loop when it is not. |
| CVE-2021-47585 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix memory leak in __add_inode_ref() Line 1169 (#3) allocates a memory chunk for victim_name by kmalloc(), but when the function returns in line 1184 (#4) victim_name allocated by line 1169 (#3) is not freed, which will lead to a memory leak. There is a similar snippet of code in this function as allocating a memory chunk for victim_name in line 1104 (#1) as well as releasing the memory in line 1116 (#2). We should kfree() victim_name when the return value of backref_in_log() is less than zero and before the function returns in line 1184 (#4). 1057 static inline int __add_inode_ref(struct btrfs_trans_handle *trans, 1058 struct btrfs_root *root, 1059 struct btrfs_path *path, 1060 struct btrfs_root *log_root, 1061 struct btrfs_inode *dir, 1062 struct btrfs_inode *inode, 1063 u64 inode_objectid, u64 parent_objectid, 1064 u64 ref_index, char *name, int namelen, 1065 int *search_done) 1066 { 1104 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #1: kmalloc (victim_name-1) 1105 if (!victim_name) 1106 return -ENOMEM; 1112 ret = backref_in_log(log_root, &search_key, 1113 parent_objectid, victim_name, 1114 victim_name_len); 1115 if (ret < 0) { 1116 kfree(victim_name); // #2: kfree (victim_name-1) 1117 return ret; 1118 } else if (!ret) { 1169 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #3: kmalloc (victim_name-2) 1170 if (!victim_name) 1171 return -ENOMEM; 1180 ret = backref_in_log(log_root, &search_key, 1181 parent_objectid, victim_name, 1182 victim_name_len); 1183 if (ret < 0) { 1184 return ret; // #4: missing kfree (victim_name-2) 1185 } else if (!ret) { 1241 return 0; 1242 } |
| CVE-2021-47584 | In the Linux kernel, the following vulnerability has been resolved: iocost: Fix divide-by-zero on donation from low hweight cgroup The donation calculation logic assumes that the donor has non-zero after-donation hweight, so the lowest active hweight a donating cgroup can have is 2 so that it can donate 1 while keeping the other 1 for itself. Earlier, we only donated from cgroups with sizable surpluses so this condition was always true. However, with the precise donation algorithm implemented, f1de2439ec43 ("blk-iocost: revamp donation amount determination") made the donation amount calculation exact enabling even low hweight cgroups to donate. This means that in rare occasions, a cgroup with active hweight of 1 can enter donation calculation triggering the following warning and then a divide-by-zero oops. WARNING: CPU: 4 PID: 0 at block/blk-iocost.c:1928 transfer_surpluses.cold+0x0/0x53 [884/94867] ... RIP: 0010:transfer_surpluses.cold+0x0/0x53 Code: 92 ff 48 c7 c7 28 d1 ab b5 65 48 8b 34 25 00 ae 01 00 48 81 c6 90 06 00 00 e8 8b 3f fe ff 48 c7 c0 ea ff ff ff e9 95 ff 92 ff <0f> 0b 48 c7 c7 30 da ab b5 e8 71 3f fe ff 4c 89 e8 4d 85 ed 74 0 4 ... Call Trace: <IRQ> ioc_timer_fn+0x1043/0x1390 call_timer_fn+0xa1/0x2c0 __run_timers.part.0+0x1ec/0x2e0 run_timer_softirq+0x35/0x70 ... iocg: invalid donation weights in /a/b: active=1 donating=1 after=0 Fix it by excluding cgroups w/ active hweight < 2 from donating. Excluding these extreme low hweight donations shouldn't affect work conservation in any meaningful way. |
| CVE-2021-47583 | In the Linux kernel, the following vulnerability has been resolved: media: mxl111sf: change mutex_init() location Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized mutex. The problem was in wrong mutex_init() location. Previous mutex_init(&state->msg_lock) call was in ->init() function, but dvb_usbv2_init() has this order of calls: dvb_usbv2_init() dvb_usbv2_adapter_init() dvb_usbv2_adapter_frontend_init() props->frontend_attach() props->init() Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach() internally we need to initialize state->msg_lock before frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_* devices, which will simply initiaize mutex. |
| CVE-2021-47582 | In the Linux kernel, the following vulnerability has been resolved: USB: core: Make do_proc_control() and do_proc_bulk() killable The USBDEVFS_CONTROL and USBDEVFS_BULK ioctls invoke usb_start_wait_urb(), which contains an uninterruptible wait with a user-specified timeout value. If timeout value is very large and the device being accessed does not respond in a reasonable amount of time, the kernel will complain about "Task X blocked for more than N seconds", as found in testing by syzbot: INFO: task syz-executor.0:8700 blocked for more than 143 seconds. Not tainted 5.14.0-rc7-syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor.0 state:D stack:23192 pid: 8700 ppid: 8455 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:4681 [inline] __schedule+0xc07/0x11f0 kernel/sched/core.c:5938 schedule+0x14b/0x210 kernel/sched/core.c:6017 schedule_timeout+0x98/0x2f0 kernel/time/timer.c:1857 do_wait_for_common+0x2da/0x480 kernel/sched/completion.c:85 __wait_for_common kernel/sched/completion.c:106 [inline] wait_for_common kernel/sched/completion.c:117 [inline] wait_for_completion_timeout+0x46/0x60 kernel/sched/completion.c:157 usb_start_wait_urb+0x167/0x550 drivers/usb/core/message.c:63 do_proc_bulk+0x978/0x1080 drivers/usb/core/devio.c:1236 proc_bulk drivers/usb/core/devio.c:1273 [inline] usbdev_do_ioctl drivers/usb/core/devio.c:2547 [inline] usbdev_ioctl+0x3441/0x6b10 drivers/usb/core/devio.c:2713 ... To fix this problem, this patch replaces usbfs's calls to usb_control_msg() and usb_bulk_msg() with special-purpose code that does essentially the same thing (as recommended in the comment for usb_start_wait_urb()), except that it always uses a killable wait and it uses GFP_KERNEL rather than GFP_NOIO. |
| CVE-2021-47580 | In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix type in min_t to avoid stack OOB Change min_t() to use type "u32" instead of type "int" to avoid stack out of bounds. With min_t() type "int" the values get sign extended and the larger value gets used causing stack out of bounds. BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707 CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189 memcpy+0x23/0x60 mm/kasan/shadow.c:65 memcpy include/linux/fortify-string.h:191 [inline] sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000 fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162 fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline] resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline] scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47579 | In the Linux kernel, the following vulnerability has been resolved: ovl: fix warning in ovl_create_real() Syzbot triggered the following warning in ovl_workdir_create() -> ovl_create_real(): if (!err && WARN_ON(!newdentry->d_inode)) { The reason is that the cgroup2 filesystem returns from mkdir without instantiating the new dentry. Weird filesystems such as this will be rejected by overlayfs at a later stage during setup, but to prevent such a warning, call ovl_mkdir_real() directly from ovl_workdir_create() and reject this case early. |
| CVE-2021-47578 | In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Don't call kcalloc() if size arg is zero If the size arg to kcalloc() is zero, it returns ZERO_SIZE_PTR. Because of that, for a following NULL pointer check to work on the returned pointer, kcalloc() must not be called with the size arg equal to zero. Return early without error before the kcalloc() call if size arg is zero. BUG: KASAN: null-ptr-deref in memcpy include/linux/fortify-string.h:191 [inline] BUG: KASAN: null-ptr-deref in sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974 Write of size 4 at addr 0000000000000010 by task syz-executor.1/22789 CPU: 1 PID: 22789 Comm: syz-executor.1 Not tainted 5.15.0-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 __kasan_report mm/kasan/report.c:446 [inline] kasan_report.cold.14+0x112/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189 memcpy+0x3b/0x60 mm/kasan/shadow.c:66 memcpy include/linux/fortify-string.h:191 [inline] sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974 do_dout_fetch drivers/scsi/scsi_debug.c:2954 [inline] do_dout_fetch drivers/scsi/scsi_debug.c:2946 [inline] resp_verify+0x49e/0x930 drivers/scsi/scsi_debug.c:4276 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline] scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 blk_execute_rq+0xdb/0x360 block/blk-exec.c:102 sg_scsi_ioctl drivers/scsi/scsi_ioctl.c:621 [inline] scsi_ioctl+0x8bb/0x15c0 drivers/scsi/scsi_ioctl.c:930 sg_ioctl_common+0x172d/0x2710 drivers/scsi/sg.c:1112 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47577 | In the Linux kernel, the following vulnerability has been resolved: io-wq: check for wq exit after adding new worker task_work We check IO_WQ_BIT_EXIT before attempting to create a new worker, and wq exit cancels pending work if we have any. But it's possible to have a race between the two, where creation checks exit finding it not set, but we're in the process of exiting. The exit side will cancel pending creation task_work, but there's a gap where we add task_work after we've canceled existing creations at exit time. Fix this by checking the EXIT bit post adding the creation task_work. If it's set, run the same cancelation that exit does. |
| CVE-2021-47576 | In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select() In resp_mode_select() sanity check the block descriptor len to avoid UAF. BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 Read of size 1 at addr ffff888026670f50 by task scsicmd/15032 CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Call Trace: <TASK> dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306 resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483 scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537 scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113 |
| CVE-2021-47572 | In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix null pointer dereference when IPv6 is not enabled When we try to add an IPv6 nexthop and IPv6 is not enabled (!CONFIG_IPV6) we'll hit a NULL pointer dereference[1] in the error path of nh_create_ipv6() due to calling ipv6_stub->fib6_nh_release. The bug has been present since the beginning of IPv6 nexthop gateway support. Commit 1aefd3de7bc6 ("ipv6: Add fib6_nh_init and release to stubs") tells us that only fib6_nh_init has a dummy stub because fib6_nh_release should not be called if fib6_nh_init returns an error, but the commit below added a call to ipv6_stub->fib6_nh_release in its error path. To fix it return the dummy stub's -EAFNOSUPPORT error directly without calling ipv6_stub->fib6_nh_release in nh_create_ipv6()'s error path. [1] Output is a bit truncated, but it clearly shows the error. BUG: kernel NULL pointer dereference, address: 000000000000000000 #PF: supervisor instruction fetch in kernel modede #PF: error_code(0x0010) - not-present pagege PGD 0 P4D 0 Oops: 0010 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 638 Comm: ip Kdump: loaded Not tainted 5.16.0-rc1+ #446 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888109f5b8f0 EFLAGS: 00010286^Ac RAX: 0000000000000000 RBX: ffff888109f5ba28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8881008a2860 RBP: ffff888109f5b9d8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff888109f5b978 R11: ffff888109f5b948 R12: 00000000ffffff9f R13: ffff8881008a2a80 R14: ffff8881008a2860 R15: ffff8881008a2840 FS: 00007f98de70f100(0000) GS:ffff88822bf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000100efc000 CR4: 00000000000006e0 Call Trace: <TASK> nh_create_ipv6+0xed/0x10c rtm_new_nexthop+0x6d7/0x13f3 ? check_preemption_disabled+0x3d/0xf2 ? lock_is_held_type+0xbe/0xfd rtnetlink_rcv_msg+0x23f/0x26a ? check_preemption_disabled+0x3d/0xf2 ? rtnl_calcit.isra.0+0x147/0x147 netlink_rcv_skb+0x61/0xb2 netlink_unicast+0x100/0x187 netlink_sendmsg+0x37f/0x3a0 ? netlink_unicast+0x187/0x187 sock_sendmsg_nosec+0x67/0x9b ____sys_sendmsg+0x19d/0x1f9 ? copy_msghdr_from_user+0x4c/0x5e ? rcu_read_lock_any_held+0x2a/0x78 ___sys_sendmsg+0x6c/0x8c ? asm_sysvec_apic_timer_interrupt+0x12/0x20 ? lockdep_hardirqs_on+0xd9/0x102 ? sockfd_lookup_light+0x69/0x99 __sys_sendmsg+0x50/0x6e do_syscall_64+0xcb/0xf2 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f98dea28914 Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 e9 5d 0c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53 RSP: 002b:00007fff859f5e68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e2e RAX: ffffffffffffffda RBX: 00000000619cb810 RCX: 00007f98dea28914 RDX: 0000000000000000 RSI: 00007fff859f5ed0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000008 R10: fffffffffffffce6 R11: 0000000000000246 R12: 0000000000000001 R13: 000055c0097ae520 R14: 000055c0097957fd R15: 00007fff859f63a0 </TASK> Modules linked in: bridge stp llc bonding virtio_net |
| CVE-2021-47571 | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect() The free_rtllib() function frees the "dev" pointer so there is use after free on the next line. Re-arrange things to avoid that. |
| CVE-2021-47570 | In the Linux kernel, the following vulnerability has been resolved: staging: r8188eu: fix a memory leak in rtw_wx_read32() Free "ptmp" before returning -EINVAL. |
| CVE-2021-47569 | In the Linux kernel, the following vulnerability has been resolved: io_uring: fail cancellation for EXITING tasks WARNING: CPU: 1 PID: 20 at fs/io_uring.c:6269 io_try_cancel_userdata+0x3c5/0x640 fs/io_uring.c:6269 CPU: 1 PID: 20 Comm: kworker/1:0 Not tainted 5.16.0-rc1-syzkaller #0 Workqueue: events io_fallback_req_func RIP: 0010:io_try_cancel_userdata+0x3c5/0x640 fs/io_uring.c:6269 Call Trace: <TASK> io_req_task_link_timeout+0x6b/0x1e0 fs/io_uring.c:6886 io_fallback_req_func+0xf9/0x1ae fs/io_uring.c:1334 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> We need original task's context to do cancellations, so if it's dying and the callback is executed in a fallback mode, fail the cancellation attempt. |
| CVE-2021-47568 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix memleak in get_file_stream_info() Fix memleak in get_file_stream_info() |
| CVE-2021-47567 | In the Linux kernel, the following vulnerability has been resolved: powerpc/32: Fix hardlockup on vmap stack overflow Since the commit c118c7303ad5 ("powerpc/32: Fix vmap stack - Do not activate MMU before reading task struct") a vmap stack overflow results in a hard lockup. This is because emergency_ctx is still addressed with its virtual address allthough data MMU is not active anymore at that time. Fix it by using a physical address instead. |
| CVE-2021-47566 | In the Linux kernel, the following vulnerability has been resolved: proc/vmcore: fix clearing user buffer by properly using clear_user() To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via "cp": systemd[1]: Starting Kdump Vmcore Save Service... kdump[420]: Kdump is using the default log level(3). kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[465]: saving vmcore-dmesg.txt complete kdump[467]: saving vmcore BUG: unable to handle page fault for address: 00007f2374e01000 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86 Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81 RSP: 0018:ffffc9000073be08 EFLAGS: 00010212 RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000 RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008 RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50 R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000 R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8 FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0 Call Trace: read_vmcore+0x236/0x2c0 proc_reg_read+0x55/0xa0 vfs_read+0x95/0x190 ksys_read+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access Prevention (SMAP)", which is used to detect wrong access from the kernel to user buffers like this: SMAP triggers a permissions violation on wrong access. In the x86-64 variant of clear_user(), SMAP is properly handled via clac()+stac(). To fix, properly use clear_user() when we're dealing with a user buffer. |
| CVE-2021-47565 | In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix kernel panic during drive powercycle test While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL. |
| CVE-2021-47564 | In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix double free issue on err path fix error path handling in prestera_bridge_port_join() that cases prestera driver to crash (see below). Trace: Internal error: Oops: 96000044 [#1] SMP Modules linked in: prestera_pci prestera uio_pdrv_genirq CPU: 1 PID: 881 Comm: ip Not tainted 5.15.0 #1 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : prestera_bridge_destroy+0x2c/0xb0 [prestera] lr : prestera_bridge_port_join+0x2cc/0x350 [prestera] sp : ffff800011a1b0f0 ... x2 : ffff000109ca6c80 x1 : dead000000000100 x0 : dead000000000122 Call trace: prestera_bridge_destroy+0x2c/0xb0 [prestera] prestera_bridge_port_join+0x2cc/0x350 [prestera] prestera_netdev_port_event.constprop.0+0x3c4/0x450 [prestera] prestera_netdev_event_handler+0xf4/0x110 [prestera] raw_notifier_call_chain+0x54/0x80 call_netdevice_notifiers_info+0x54/0xa0 __netdev_upper_dev_link+0x19c/0x380 |
| CVE-2021-47563 | In the Linux kernel, the following vulnerability has been resolved: ice: avoid bpf_prog refcount underflow Ice driver has the routines for managing XDP resources that are shared between ndo_bpf op and VSI rebuild flow. The latter takes place for example when user changes queue count on an interface via ethtool's set_channels(). There is an issue around the bpf_prog refcounting when VSI is being rebuilt - since ice_prepare_xdp_rings() is called with vsi->xdp_prog as an argument that is used later on by ice_vsi_assign_bpf_prog(), same bpf_prog pointers are swapped with each other. Then it is also interpreted as an 'old_prog' which in turn causes us to call bpf_prog_put on it that will decrement its refcount. Below splat can be interpreted in a way that due to zero refcount of a bpf_prog it is wiped out from the system while kernel still tries to refer to it: [ 481.069429] BUG: unable to handle page fault for address: ffffc9000640f038 [ 481.077390] #PF: supervisor read access in kernel mode [ 481.083335] #PF: error_code(0x0000) - not-present page [ 481.089276] PGD 100000067 P4D 100000067 PUD 1001cb067 PMD 106d2b067 PTE 0 [ 481.097141] Oops: 0000 [#1] PREEMPT SMP PTI [ 481.101980] CPU: 12 PID: 3339 Comm: sudo Tainted: G OE 5.15.0-rc5+ #1 [ 481.110840] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 481.122021] RIP: 0010:dev_xdp_prog_id+0x25/0x40 [ 481.127265] Code: 80 00 00 00 00 0f 1f 44 00 00 89 f6 48 c1 e6 04 48 01 fe 48 8b 86 98 08 00 00 48 85 c0 74 13 48 8b 50 18 31 c0 48 85 d2 74 07 <48> 8b 42 38 8b 40 20 c3 48 8b 96 90 08 00 00 eb e8 66 2e 0f 1f 84 [ 481.148991] RSP: 0018:ffffc90007b63868 EFLAGS: 00010286 [ 481.155034] RAX: 0000000000000000 RBX: ffff889080824000 RCX: 0000000000000000 [ 481.163278] RDX: ffffc9000640f000 RSI: ffff889080824010 RDI: ffff889080824000 [ 481.171527] RBP: ffff888107af7d00 R08: 0000000000000000 R09: ffff88810db5f6e0 [ 481.179776] R10: 0000000000000000 R11: ffff8890885b9988 R12: ffff88810db5f4bc [ 481.188026] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 481.196276] FS: 00007f5466d5bec0(0000) GS:ffff88903fb00000(0000) knlGS:0000000000000000 [ 481.205633] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 481.212279] CR2: ffffc9000640f038 CR3: 000000014429c006 CR4: 00000000003706e0 [ 481.220530] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 481.228771] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 481.237029] Call Trace: [ 481.239856] rtnl_fill_ifinfo+0x768/0x12e0 [ 481.244602] rtnl_dump_ifinfo+0x525/0x650 [ 481.249246] ? __alloc_skb+0xa5/0x280 [ 481.253484] netlink_dump+0x168/0x3c0 [ 481.257725] netlink_recvmsg+0x21e/0x3e0 [ 481.262263] ____sys_recvmsg+0x87/0x170 [ 481.266707] ? __might_fault+0x20/0x30 [ 481.271046] ? _copy_from_user+0x66/0xa0 [ 481.275591] ? iovec_from_user+0xf6/0x1c0 [ 481.280226] ___sys_recvmsg+0x82/0x100 [ 481.284566] ? sock_sendmsg+0x5e/0x60 [ 481.288791] ? __sys_sendto+0xee/0x150 [ 481.293129] __sys_recvmsg+0x56/0xa0 [ 481.297267] do_syscall_64+0x3b/0xc0 [ 481.301395] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 481.307238] RIP: 0033:0x7f5466f39617 [ 481.311373] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb bd 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2f 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 481.342944] RSP: 002b:00007ffedc7f4308 EFLAGS: 00000246 ORIG_RAX: 000000000000002f [ 481.361783] RAX: ffffffffffffffda RBX: 00007ffedc7f5460 RCX: 00007f5466f39617 [ 481.380278] RDX: 0000000000000000 RSI: 00007ffedc7f5360 RDI: 0000000000000003 [ 481.398500] RBP: 00007ffedc7f53f0 R08: 0000000000000000 R09: 000055d556f04d50 [ 481.416463] R10: 0000000000000077 R11: 0000000000000246 R12: 00007ffedc7f5360 [ 481.434131] R13: 00007ffedc7f5350 R14: 00007ffedc7f5344 R15: 0000000000000e98 [ 481.451520] Modules linked in: ice ---truncated--- |
| CVE-2021-47562 | In the Linux kernel, the following vulnerability has been resolved: ice: fix vsi->txq_map sizing The approach of having XDP queue per CPU regardless of user's setting exposed a hidden bug that could occur in case when Rx queue count differ from Tx queue count. Currently vsi->txq_map's size is equal to the doubled vsi->alloc_txq, which is not correct due to the fact that XDP rings were previously based on the Rx queue count. Below splat can be seen when ethtool -L is used and XDP rings are configured: [ 682.875339] BUG: kernel NULL pointer dereference, address: 000000000000000f [ 682.883403] #PF: supervisor read access in kernel mode [ 682.889345] #PF: error_code(0x0000) - not-present page [ 682.895289] PGD 0 P4D 0 [ 682.898218] Oops: 0000 [#1] PREEMPT SMP PTI [ 682.903055] CPU: 42 PID: 2878 Comm: ethtool Tainted: G OE 5.15.0-rc5+ #1 [ 682.912214] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 682.923380] RIP: 0010:devres_remove+0x44/0x130 [ 682.928527] Code: 49 89 f4 55 48 89 fd 4c 89 ff 53 48 83 ec 10 e8 92 b9 49 00 48 8b 9d a8 02 00 00 48 8d 8d a0 02 00 00 49 89 c2 48 39 cb 74 0f <4c> 3b 63 10 74 25 48 8b 5b 08 48 39 cb 75 f1 4c 89 ff 4c 89 d6 e8 [ 682.950237] RSP: 0018:ffffc90006a679f0 EFLAGS: 00010002 [ 682.956285] RAX: 0000000000000286 RBX: ffffffffffffffff RCX: ffff88908343a370 [ 682.964538] RDX: 0000000000000001 RSI: ffffffff81690d60 RDI: 0000000000000000 [ 682.972789] RBP: ffff88908343a0d0 R08: 0000000000000000 R09: 0000000000000000 [ 682.981040] R10: 0000000000000286 R11: 3fffffffffffffff R12: ffffffff81690d60 [ 682.989282] R13: ffffffff81690a00 R14: ffff8890819807a8 R15: ffff88908343a36c [ 682.997535] FS: 00007f08c7bfa740(0000) GS:ffff88a03fd00000(0000) knlGS:0000000000000000 [ 683.006910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 683.013557] CR2: 000000000000000f CR3: 0000001080a66003 CR4: 00000000003706e0 [ 683.021819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 683.030075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 683.038336] Call Trace: [ 683.041167] devm_kfree+0x33/0x50 [ 683.045004] ice_vsi_free_arrays+0x5e/0xc0 [ice] [ 683.050380] ice_vsi_rebuild+0x4c8/0x750 [ice] [ 683.055543] ice_vsi_recfg_qs+0x9a/0x110 [ice] [ 683.060697] ice_set_channels+0x14f/0x290 [ice] [ 683.065962] ethnl_set_channels+0x333/0x3f0 [ 683.070807] genl_family_rcv_msg_doit+0xea/0x150 [ 683.076152] genl_rcv_msg+0xde/0x1d0 [ 683.080289] ? channels_prepare_data+0x60/0x60 [ 683.085432] ? genl_get_cmd+0xd0/0xd0 [ 683.089667] netlink_rcv_skb+0x50/0xf0 [ 683.094006] genl_rcv+0x24/0x40 [ 683.097638] netlink_unicast+0x239/0x340 [ 683.102177] netlink_sendmsg+0x22e/0x470 [ 683.106717] sock_sendmsg+0x5e/0x60 [ 683.110756] __sys_sendto+0xee/0x150 [ 683.114894] ? handle_mm_fault+0xd0/0x2a0 [ 683.119535] ? do_user_addr_fault+0x1f3/0x690 [ 683.134173] __x64_sys_sendto+0x25/0x30 [ 683.148231] do_syscall_64+0x3b/0xc0 [ 683.161992] entry_SYSCALL_64_after_hwframe+0x44/0xae Fix this by taking into account the value that num_possible_cpus() yields in addition to vsi->alloc_txq instead of doubling the latter. |
| CVE-2021-47561 | In the Linux kernel, the following vulnerability has been resolved: i2c: virtio: disable timeout handling If a timeout is hit, it can result is incorrect data on the I2C bus and/or memory corruptions in the guest since the device can still be operating on the buffers it was given while the guest has freed them. Here is, for example, the start of a slub_debug splat which was triggered on the next transfer after one transfer was forced to timeout by setting a breakpoint in the backend (rust-vmm/vhost-device): BUG kmalloc-1k (Not tainted): Poison overwritten First byte 0x1 instead of 0x6b Allocated in virtio_i2c_xfer+0x65/0x35c age=350 cpu=0 pid=29 __kmalloc+0xc2/0x1c9 virtio_i2c_xfer+0x65/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Freed in virtio_i2c_xfer+0x32e/0x35c age=244 cpu=0 pid=29 kfree+0x1bd/0x1cc virtio_i2c_xfer+0x32e/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 There is no simple fix for this (the driver would have to always create bounce buffers and hold on to them until the device eventually returns the buffers), so just disable the timeout support for now. |
| CVE-2021-47560 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum: Protect driver from buggy firmware When processing port up/down events generated by the device's firmware, the driver protects itself from events reported for non-existent local ports, but not the CPU port (local port 0), which exists, but lacks a netdev. This can result in a NULL pointer dereference when calling netif_carrier_{on,off}(). Fix this by bailing early when processing an event reported for the CPU port. Problem was only observed when running on top of a buggy emulator. |
| CVE-2021-47559 | In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix NULL pointer dereferencing in smc_vlan_by_tcpsk() Coverity reports a possible NULL dereferencing problem: in smc_vlan_by_tcpsk(): 6. returned_null: netdev_lower_get_next returns NULL (checked 29 out of 30 times). 7. var_assigned: Assigning: ndev = NULL return value from netdev_lower_get_next. 1623 ndev = (struct net_device *)netdev_lower_get_next(ndev, &lower); CID 1468509 (#1 of 1): Dereference null return value (NULL_RETURNS) 8. dereference: Dereferencing a pointer that might be NULL ndev when calling is_vlan_dev. 1624 if (is_vlan_dev(ndev)) { Remove the manual implementation and use netdev_walk_all_lower_dev() to iterate over the lower devices. While on it remove an obsolete function parameter comment. |
| CVE-2021-47558 | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Disable Tx queues when reconfiguring the interface The Tx queues were not disabled in situations where the driver needed to stop the interface to apply a new configuration. This could result in a kernel panic when doing any of the 3 following actions: * reconfiguring the number of queues (ethtool -L) * reconfiguring the size of the ring buffers (ethtool -G) * installing/removing an XDP program (ip l set dev ethX xdp) Prevent the panic by making sure netif_tx_disable is called when stopping an interface. Without this patch, the following kernel panic can be observed when doing any of the actions above: Unable to handle kernel paging request at virtual address ffff80001238d040 [....] Call trace: dwmac4_set_addr+0x8/0x10 dev_hard_start_xmit+0xe4/0x1ac sch_direct_xmit+0xe8/0x39c __dev_queue_xmit+0x3ec/0xaf0 dev_queue_xmit+0x14/0x20 [...] [ end trace 0000000000000002 ]--- |
| CVE-2021-47557 | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_ets: don't peek at classes beyond 'nbands' when the number of DRR classes decreases, the round-robin active list can contain elements that have already been freed in ets_qdisc_change(). As a consequence, it's possible to see a NULL dereference crash, caused by the attempt to call cl->qdisc->ops->peek(cl->qdisc) when cl->qdisc is NULL: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 910 Comm: mausezahn Not tainted 5.16.0-rc1+ #475 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:ets_qdisc_dequeue+0x129/0x2c0 [sch_ets] Code: c5 01 41 39 ad e4 02 00 00 0f 87 18 ff ff ff 49 8b 85 c0 02 00 00 49 39 c4 0f 84 ba 00 00 00 49 8b ad c0 02 00 00 48 8b 7d 10 <48> 8b 47 18 48 8b 40 38 0f ae e8 ff d0 48 89 c3 48 85 c0 0f 84 9d RSP: 0000:ffffbb36c0b5fdd8 EFLAGS: 00010287 RAX: ffff956678efed30 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: ffffffff9b938dc9 RDI: 0000000000000000 RBP: ffff956678efed30 R08: e2f3207fe360129c R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff956678efeac0 R13: ffff956678efe800 R14: ffff956611545000 R15: ffff95667ac8f100 FS: 00007f2aa9120740(0000) GS:ffff95667b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000011070c000 CR4: 0000000000350ee0 Call Trace: <TASK> qdisc_peek_dequeued+0x29/0x70 [sch_ets] tbf_dequeue+0x22/0x260 [sch_tbf] __qdisc_run+0x7f/0x630 net_tx_action+0x290/0x4c0 __do_softirq+0xee/0x4f8 irq_exit_rcu+0xf4/0x130 sysvec_apic_timer_interrupt+0x52/0xc0 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0033:0x7f2aa7fc9ad4 Code: b9 ff ff 48 8b 54 24 18 48 83 c4 08 48 89 ee 48 89 df 5b 5d e9 ed fc ff ff 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa <53> 48 83 ec 10 48 8b 05 10 64 33 00 48 8b 00 48 85 c0 0f 85 84 00 RSP: 002b:00007ffe5d33fab8 EFLAGS: 00000202 RAX: 0000000000000002 RBX: 0000561f72c31460 RCX: 0000561f72c31720 RDX: 0000000000000002 RSI: 0000561f72c31722 RDI: 0000561f72c31720 RBP: 000000000000002a R08: 00007ffe5d33fa40 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 0000561f7187e380 R13: 0000000000000000 R14: 0000000000000000 R15: 0000561f72c31460 </TASK> Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt intel_rapl_msr iTCO_vendor_support intel_rapl_common joydev virtio_balloon lpc_ich i2c_i801 i2c_smbus pcspkr ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel ahci libahci ghash_clmulni_intel serio_raw libata virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000018 Ensuring that 'alist' was never zeroed [1] was not sufficient, we need to remove from the active list those elements that are no more SP nor DRR. [1] https://lore.kernel.org/netdev/60d274838bf09777f0371253416e8af71360bc08.1633609148.git.dcaratti@redhat.com/ v3: fix race between ets_qdisc_change() and ets_qdisc_dequeue() delisting DRR classes beyond 'nbands' in ets_qdisc_change() with the qdisc lock acquired, thanks to Cong Wang. v2: when a NULL qdisc is found in the DRR active list, try to dequeue skb from the next list item. |
| CVE-2021-47556 | In the Linux kernel, the following vulnerability has been resolved: ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce() ethtool_set_coalesce() now uses both the .get_coalesce() and .set_coalesce() callbacks. But the check for their availability is buggy, so changing the coalesce settings on a device where the driver provides only _one_ of the callbacks results in a NULL pointer dereference instead of an -EOPNOTSUPP. Fix the condition so that the availability of both callbacks is ensured. This also matches the netlink code. Note that reproducing this requires some effort - it only affects the legacy ioctl path, and needs a specific combination of driver options: - have .get_coalesce() and .coalesce_supported but no .set_coalesce(), or - have .set_coalesce() but no .get_coalesce(). Here eg. ethtool doesn't cause the crash as it first attempts to call ethtool_get_coalesce() and bails out on error. |
| CVE-2021-47555 | In the Linux kernel, the following vulnerability has been resolved: net: vlan: fix underflow for the real_dev refcnt Inject error before dev_hold(real_dev) in register_vlan_dev(), and execute the following testcase: ip link add dev dummy1 type dummy ip link add name dummy1.100 link dummy1 type vlan id 100 ip link del dev dummy1 When the dummy netdevice is removed, we will get a WARNING as following: ======================================================================= refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 2 PID: 0 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 and an endless loop of: ======================================================================= unregister_netdevice: waiting for dummy1 to become free. Usage count = -1073741824 That is because dev_put(real_dev) in vlan_dev_free() be called without dev_hold(real_dev) in register_vlan_dev(). It makes the refcnt of real_dev underflow. Move the dev_hold(real_dev) to vlan_dev_init() which is the call-back of ndo_init(). That makes dev_hold() and dev_put() for vlan's real_dev symmetrical. |
| CVE-2021-47554 | In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: avoid putting an uninitialized iova_domain The system will crash if we put an uninitialized iova_domain, this could happen when an error occurs before initializing the iova_domain in vdpasim_create(). BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0 ... Call Trace: <TASK> put_iova_domain+0x29/0x220 vdpasim_free+0xd1/0x120 [vdpa_sim] vdpa_release_dev+0x21/0x40 [vdpa] device_release+0x33/0x90 kobject_release+0x63/0x160 vdpasim_create+0x127/0x2a0 [vdpa_sim] vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net] vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa] genl_family_rcv_msg_doit+0x112/0x140 genl_rcv_msg+0xdf/0x1d0 ... So we must make sure the iova_domain is already initialized before put it. In addition, we may get the following warning in this case: WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70 So we must make sure the iova_cache_put() is invoked only if the iova_cache_get() is already invoked. Let's fix it together. |
| CVE-2021-47553 | In the Linux kernel, the following vulnerability has been resolved: sched/scs: Reset task stack state in bringup_cpu() To hot unplug a CPU, the idle task on that CPU calls a few layers of C code before finally leaving the kernel. When KASAN is in use, poisoned shadow is left around for each of the active stack frames, and when shadow call stacks are in use. When shadow call stacks (SCS) are in use the task's saved SCS SP is left pointing at an arbitrary point within the task's shadow call stack. When a CPU is offlined than onlined back into the kernel, this stale state can adversely affect execution. Stale KASAN shadow can alias new stackframes and result in bogus KASAN warnings. A stale SCS SP is effectively a memory leak, and prevents a portion of the shadow call stack being used. Across a number of hotplug cycles the idle task's entire shadow call stack can become unusable. We previously fixed the KASAN issue in commit: e1b77c92981a5222 ("sched/kasan: remove stale KASAN poison after hotplug") ... by removing any stale KASAN stack poison immediately prior to onlining a CPU. Subsequently in commit: f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled") ... the refactoring left the KASAN and SCS cleanup in one-time idle thread initialization code rather than something invoked prior to each CPU being onlined, breaking both as above. We fixed SCS (but not KASAN) in commit: 63acd42c0d4942f7 ("sched/scs: Reset the shadow stack when idle_task_exit") ... but as this runs in the context of the idle task being offlined it's potentially fragile. To fix these consistently and more robustly, reset the SCS SP and KASAN shadow of a CPU's idle task immediately before we online that CPU in bringup_cpu(). This ensures the idle task always has a consistent state when it is running, and removes the need to so so when exiting an idle task. Whenever any thread is created, dup_task_struct() will give the task a stack which is free of KASAN shadow, and initialize the task's SCS SP, so there's no need to specially initialize either for idle thread within init_idle(), as this was only necessary to handle hotplug cycles. I've tested this on arm64 with: * gcc 11.1.0, defconfig +KASAN_INLINE, KASAN_STACK * clang 12.0.0, defconfig +KASAN_INLINE, KASAN_STACK, SHADOW_CALL_STACK ... offlining and onlining CPUS with: | while true; do | for C in /sys/devices/system/cpu/cpu*/online; do | echo 0 > $C; | echo 1 > $C; | done | done |
| CVE-2021-47552 | In the Linux kernel, the following vulnerability has been resolved: blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release() For avoiding to slow down queue destroy, we don't call blk_mq_quiesce_queue() in blk_cleanup_queue(), instead of delaying to cancel dispatch work in blk_release_queue(). However, this way has caused kernel oops[1], reported by Changhui. The log shows that scsi_device can be freed before running blk_release_queue(), which is expected too since scsi_device is released after the scsi disk is closed and the scsi_device is removed. Fixes the issue by canceling blk-mq dispatch work in both blk_cleanup_queue() and disk_release(): 1) when disk_release() is run, the disk has been closed, and any sync dispatch activities have been done, so canceling dispatch work is enough to quiesce filesystem I/O dispatch activity. 2) in blk_cleanup_queue(), we only focus on passthrough request, and passthrough request is always explicitly allocated & freed by its caller, so once queue is frozen, all sync dispatch activity for passthrough request has been done, then it is enough to just cancel dispatch work for avoiding any dispatch activity. [1] kernel panic log [12622.769416] BUG: kernel NULL pointer dereference, address: 0000000000000300 [12622.777186] #PF: supervisor read access in kernel mode [12622.782918] #PF: error_code(0x0000) - not-present page [12622.788649] PGD 0 P4D 0 [12622.791474] Oops: 0000 [#1] PREEMPT SMP PTI [12622.796138] CPU: 10 PID: 744 Comm: kworker/10:1H Kdump: loaded Not tainted 5.15.0+ #1 [12622.804877] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015 [12622.813321] Workqueue: kblockd blk_mq_run_work_fn [12622.818572] RIP: 0010:sbitmap_get+0x75/0x190 [12622.823336] Code: 85 80 00 00 00 41 8b 57 08 85 d2 0f 84 b1 00 00 00 45 31 e4 48 63 cd 48 8d 1c 49 48 c1 e3 06 49 03 5f 10 4c 8d 6b 40 83 f0 01 <48> 8b 33 44 89 f2 4c 89 ef 0f b6 c8 e8 fa f3 ff ff 83 f8 ff 75 58 [12622.844290] RSP: 0018:ffffb00a446dbd40 EFLAGS: 00010202 [12622.850120] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000004 [12622.858082] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffffa0b7a2dfe030 [12622.866042] RBP: 0000000000000004 R08: 0000000000000001 R09: ffffa0b742721334 [12622.874003] R10: 0000000000000008 R11: 0000000000000008 R12: 0000000000000000 [12622.881964] R13: 0000000000000340 R14: 0000000000000000 R15: ffffa0b7a2dfe030 [12622.889926] FS: 0000000000000000(0000) GS:ffffa0baafb40000(0000) knlGS:0000000000000000 [12622.898956] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12622.905367] CR2: 0000000000000300 CR3: 0000000641210001 CR4: 00000000001706e0 [12622.913328] Call Trace: [12622.916055] <TASK> [12622.918394] scsi_mq_get_budget+0x1a/0x110 [12622.922969] __blk_mq_do_dispatch_sched+0x1d4/0x320 [12622.928404] ? pick_next_task_fair+0x39/0x390 [12622.933268] __blk_mq_sched_dispatch_requests+0xf4/0x140 [12622.939194] blk_mq_sched_dispatch_requests+0x30/0x60 [12622.944829] __blk_mq_run_hw_queue+0x30/0xa0 [12622.949593] process_one_work+0x1e8/0x3c0 [12622.954059] worker_thread+0x50/0x3b0 [12622.958144] ? rescuer_thread+0x370/0x370 [12622.962616] kthread+0x158/0x180 [12622.966218] ? set_kthread_struct+0x40/0x40 [12622.970884] ret_from_fork+0x22/0x30 [12622.974875] </TASK> [12622.977309] Modules linked in: scsi_debug rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs sunrpc dm_multipath intel_rapl_msr intel_rapl_common dell_wmi_descriptor sb_edac rfkill video x86_pkg_temp_thermal intel_powerclamp dcdbas coretemp kvm_intel kvm mgag200 irqbypass i2c_algo_bit rapl drm_kms_helper ipmi_ssif intel_cstate intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops pcspkr cec mei_me lpc_ich mei ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter drm fuse xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg ixgbe ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata megaraid_sas ghash_clmulni_intel tg3 wdat_w ---truncated--- |
| CVE-2021-47551 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch already been called, the start_cpsch will not be called since there is no resume in this case. When reset been triggered again, driver should avoid to do uninitialization again. |
| CVE-2021-47550 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: fix potential memleak In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed There is a potential memleak if not call kobject_put. |
| CVE-2021-47549 | In the Linux kernel, the following vulnerability has been resolved: sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop. |
| CVE-2021-47548 | In the Linux kernel, the following vulnerability has been resolved: ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() The if statement: if (port >= DSAF_GE_NUM) return; limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off; because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6). To fix this possible array overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function returns. |
| CVE-2021-47547 | In the Linux kernel, the following vulnerability has been resolved: net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the 'for' end, the 'k' is 8. At this time, the array 'lp->phy[8]' may be out of bound. |
| CVE-2021-47546 | In the Linux kernel, the following vulnerability has been resolved: ipv6: fix memory leak in fib6_rule_suppress The kernel leaks memory when a `fib` rule is present in IPv6 nftables firewall rules and a suppress_prefix rule is present in the IPv6 routing rules (used by certain tools such as wg-quick). In such scenarios, every incoming packet will leak an allocation in `ip6_dst_cache` slab cache. After some hours of `bpftrace`-ing and source code reading, I tracked down the issue to ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule"). The problem with that change is that the generic `args->flags` always have `FIB_LOOKUP_NOREF` set[1][2] but the IPv6-specific flag `RT6_LOOKUP_F_DST_NOREF` might not be, leading to `fib6_rule_suppress` not decreasing the refcount when needed. How to reproduce: - Add the following nftables rule to a prerouting chain: meta nfproto ipv6 fib saddr . mark . iif oif missing drop This can be done with: sudo nft create table inet test sudo nft create chain inet test test_chain '{ type filter hook prerouting priority filter + 10; policy accept; }' sudo nft add rule inet test test_chain meta nfproto ipv6 fib saddr . mark . iif oif missing drop - Run: sudo ip -6 rule add table main suppress_prefixlength 0 - Watch `sudo slabtop -o | grep ip6_dst_cache` to see memory usage increase with every incoming ipv6 packet. This patch exposes the protocol-specific flags to the protocol specific `suppress` function, and check the protocol-specific `flags` argument for RT6_LOOKUP_F_DST_NOREF instead of the generic FIB_LOOKUP_NOREF when decreasing the refcount, like this. [1]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L71 [2]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L99 |
| CVE-2021-47544 | In the Linux kernel, the following vulnerability has been resolved: tcp: fix page frag corruption on page fault Steffen reported a TCP stream corruption for HTTP requests served by the apache web-server using a cifs mount-point and memory mapping the relevant file. The root cause is quite similar to the one addressed by commit 20eb4f29b602 ("net: fix sk_page_frag() recursion from memory reclaim"). Here the nested access to the task page frag is caused by a page fault on the (mmapped) user-space memory buffer coming from the cifs file. The page fault handler performs an smb transaction on a different socket, inside the same process context. Since sk->sk_allaction for such socket does not prevent the usage for the task_frag, the nested allocation modify "under the hood" the page frag in use by the outer sendmsg call, corrupting the stream. The overall relevant stack trace looks like the following: httpd 78268 [001] 3461630.850950: probe:tcp_sendmsg_locked: ffffffff91461d91 tcp_sendmsg_locked+0x1 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139814e sock_sendmsg+0x3e ffffffffc06dfe1d smb_send_kvec+0x28 [...] ffffffffc06cfaf8 cifs_readpages+0x213 ffffffff90e83c4b read_pages+0x6b ffffffff90e83f31 __do_page_cache_readahead+0x1c1 ffffffff90e79e98 filemap_fault+0x788 ffffffff90eb0458 __do_fault+0x38 ffffffff90eb5280 do_fault+0x1a0 ffffffff90eb7c84 __handle_mm_fault+0x4d4 ffffffff90eb8093 handle_mm_fault+0xc3 ffffffff90c74f6d __do_page_fault+0x1ed ffffffff90c75277 do_page_fault+0x37 ffffffff9160111e page_fault+0x1e ffffffff9109e7b5 copyin+0x25 ffffffff9109eb40 _copy_from_iter_full+0xe0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139815c sock_sendmsg+0x4c ffffffff913981f7 sock_write_iter+0x97 ffffffff90f2cc56 do_iter_readv_writev+0x156 ffffffff90f2dff0 do_iter_write+0x80 ffffffff90f2e1c3 vfs_writev+0xa3 ffffffff90f2e27c do_writev+0x5c ffffffff90c042bb do_syscall_64+0x5b ffffffff916000ad entry_SYSCALL_64_after_hwframe+0x65 The cifs filesystem rightfully sets sk_allocations to GFP_NOFS, we can avoid the nesting using the sk page frag for allocation lacking the __GFP_FS flag. Do not define an additional mm-helper for that, as this is strictly tied to the sk page frag usage. v1 -> v2: - use a stricted sk_page_frag() check instead of reordering the code (Eric) |
| CVE-2021-47542 | In the Linux kernel, the following vulnerability has been resolved: net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. |
| CVE-2021-47541 | In the Linux kernel, the following vulnerability has been resolved: net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code. |
| CVE-2021-47540 | In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix NULL pointer dereference in mt7915_get_phy_mode Fix the following NULL pointer dereference in mt7915_get_phy_mode routine adding an ibss interface to the mt7915 driver. [ 101.137097] wlan0: Trigger new scan to find an IBSS to join [ 102.827039] wlan0: Creating new IBSS network, BSSID 26:a4:50:1a:6e:69 [ 103.064756] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 103.073670] Mem abort info: [ 103.076520] ESR = 0x96000005 [ 103.079614] EC = 0x25: DABT (current EL), IL = 32 bits [ 103.084934] SET = 0, FnV = 0 [ 103.088042] EA = 0, S1PTW = 0 [ 103.091215] Data abort info: [ 103.094104] ISV = 0, ISS = 0x00000005 [ 103.098041] CM = 0, WnR = 0 [ 103.101044] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000460b1000 [ 103.107565] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 103.116590] Internal error: Oops: 96000005 [#1] SMP [ 103.189066] CPU: 1 PID: 333 Comm: kworker/u4:3 Not tainted 5.10.75 #0 [ 103.195498] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 103.201124] Workqueue: phy0 ieee80211_iface_work [mac80211] [ 103.206695] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--) [ 103.212705] pc : mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.218103] lr : mt7915_mcu_add_bss_info+0x11c/0x760 [mt7915e] [ 103.223927] sp : ffffffc011cdb9e0 [ 103.227235] x29: ffffffc011cdb9e0 x28: ffffff8006563098 [ 103.232545] x27: ffffff8005f4da22 x26: ffffff800685ac40 [ 103.237855] x25: 0000000000000001 x24: 000000000000011f [ 103.243165] x23: ffffff8005f4e260 x22: ffffff8006567918 [ 103.248475] x21: ffffff8005f4df80 x20: ffffff800685ac58 [ 103.253785] x19: ffffff8006744400 x18: 0000000000000000 [ 103.259094] x17: 0000000000000000 x16: 0000000000000001 [ 103.264403] x15: 000899c3a2d9d2e4 x14: 000899bdc3c3a1c8 [ 103.269713] x13: 0000000000000000 x12: 0000000000000000 [ 103.275024] x11: ffffffc010e30c20 x10: 0000000000000000 [ 103.280333] x9 : 0000000000000050 x8 : ffffff8006567d88 [ 103.285642] x7 : ffffff8006563b5c x6 : ffffff8006563b44 [ 103.290952] x5 : 0000000000000002 x4 : 0000000000000001 [ 103.296262] x3 : 0000000000000001 x2 : 0000000000000001 [ 103.301572] x1 : 0000000000000000 x0 : 0000000000000011 [ 103.306882] Call trace: [ 103.309328] mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.314378] mt7915_bss_info_changed+0x198/0x200 [mt7915e] [ 103.319941] ieee80211_bss_info_change_notify+0x128/0x290 [mac80211] [ 103.326360] __ieee80211_sta_join_ibss+0x308/0x6c4 [mac80211] [ 103.332171] ieee80211_sta_create_ibss+0x8c/0x10c [mac80211] [ 103.337895] ieee80211_ibss_work+0x3dc/0x614 [mac80211] [ 103.343185] ieee80211_iface_work+0x388/0x3f0 [mac80211] [ 103.348495] process_one_work+0x288/0x690 [ 103.352499] worker_thread+0x70/0x464 [ 103.356157] kthread+0x144/0x150 [ 103.359380] ret_from_fork+0x10/0x18 [ 103.362952] Code: 394008c3 52800220 394000e4 7100007f (39400023) |
| CVE-2021-47539 | In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxrpc_peer leak in rxrpc_look_up_bundle() Need to call rxrpc_put_peer() for bundle candidate before kfree() as it holds a ref to rxrpc_peer. [DH: v2: Changed to abstract out the bundle freeing code into a function] |
| CVE-2021-47538 | In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxrpc_local leak in rxrpc_lookup_peer() Need to call rxrpc_put_local() for peer candidate before kfree() as it holds a ref to rxrpc_local. [DH: v2: Changed to abstract the peer freeing code out into a function] |
| CVE-2021-47537 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix a memleak bug in rvu_mbox_init() In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code. |
| CVE-2021-47536 | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix wrong list_del in smc_lgr_cleanup_early smc_lgr_cleanup_early() meant to delete the link group from the link group list, but it deleted the list head by mistake. This may cause memory corruption since we didn't remove the real link group from the list and later memseted the link group structure. We got a list corruption panic when testing: [ 231.277259] list_del corruption. prev->next should be ffff8881398a8000, but was 0000000000000000 [ 231.278222] ------------[ cut here ]------------ [ 231.278726] kernel BUG at lib/list_debug.c:53! [ 231.279326] invalid opcode: 0000 [#1] SMP NOPTI [ 231.279803] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.46+ #435 [ 231.280466] Hardware name: Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014 [ 231.281248] Workqueue: events smc_link_down_work [ 231.281732] RIP: 0010:__list_del_entry_valid+0x70/0x90 [ 231.282258] Code: 4c 60 82 e8 7d cc 6a 00 0f 0b 48 89 fe 48 c7 c7 88 4c 60 82 e8 6c cc 6a 00 0f 0b 48 89 fe 48 c7 c7 c0 4c 60 82 e8 5b cc 6a 00 <0f> 0b 48 89 fe 48 c7 c7 00 4d 60 82 e8 4a cc 6a 00 0f 0b cc cc cc [ 231.284146] RSP: 0018:ffffc90000033d58 EFLAGS: 00010292 [ 231.284685] RAX: 0000000000000054 RBX: ffff8881398a8000 RCX: 0000000000000000 [ 231.285415] RDX: 0000000000000001 RSI: ffff88813bc18040 RDI: ffff88813bc18040 [ 231.286141] RBP: ffffffff8305ad40 R08: 0000000000000003 R09: 0000000000000001 [ 231.286873] R10: ffffffff82803da0 R11: ffffc90000033b90 R12: 0000000000000001 [ 231.287606] R13: 0000000000000000 R14: ffff8881398a8000 R15: 0000000000000003 [ 231.288337] FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [ 231.289160] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.289754] CR2: 0000000000e72058 CR3: 000000010fa96006 CR4: 00000000003706f0 [ 231.290485] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 231.291211] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 231.291940] Call Trace: [ 231.292211] smc_lgr_terminate_sched+0x53/0xa0 [ 231.292677] smc_switch_conns+0x75/0x6b0 [ 231.293085] ? update_load_avg+0x1a6/0x590 [ 231.293517] ? ttwu_do_wakeup+0x17/0x150 [ 231.293907] ? update_load_avg+0x1a6/0x590 [ 231.294317] ? newidle_balance+0xca/0x3d0 [ 231.294716] smcr_link_down+0x50/0x1a0 [ 231.295090] ? __wake_up_common_lock+0x77/0x90 [ 231.295534] smc_link_down_work+0x46/0x60 [ 231.295933] process_one_work+0x18b/0x350 |
| CVE-2021-47535 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/a6xx: Allocate enough space for GMU registers In commit 142639a52a01 ("drm/msm/a6xx: fix crashstate capture for A650") we changed a6xx_get_gmu_registers() to read 3 sets of registers. Unfortunately, we didn't change the memory allocation for the array. That leads to a KASAN warning (this was on the chromeos-5.4 kernel, which has the problematic commit backported to it): BUG: KASAN: slab-out-of-bounds in _a6xx_get_gmu_registers+0x144/0x430 Write of size 8 at addr ffffff80c89432b0 by task A618-worker/209 CPU: 5 PID: 209 Comm: A618-worker Tainted: G W 5.4.156-lockdep #22 Hardware name: Google Lazor Limozeen without Touchscreen (rev5 - rev8) (DT) Call trace: dump_backtrace+0x0/0x248 show_stack+0x20/0x2c dump_stack+0x128/0x1ec print_address_description+0x88/0x4a0 __kasan_report+0xfc/0x120 kasan_report+0x10/0x18 __asan_report_store8_noabort+0x1c/0x24 _a6xx_get_gmu_registers+0x144/0x430 a6xx_gpu_state_get+0x330/0x25d4 msm_gpu_crashstate_capture+0xa0/0x84c recover_worker+0x328/0x838 kthread_worker_fn+0x32c/0x574 kthread+0x2dc/0x39c ret_from_fork+0x10/0x18 Allocated by task 209: __kasan_kmalloc+0xfc/0x1c4 kasan_kmalloc+0xc/0x14 kmem_cache_alloc_trace+0x1f0/0x2a0 a6xx_gpu_state_get+0x164/0x25d4 msm_gpu_crashstate_capture+0xa0/0x84c recover_worker+0x328/0x838 kthread_worker_fn+0x32c/0x574 kthread+0x2dc/0x39c ret_from_fork+0x10/0x18 |
| CVE-2021-47534 | In the Linux kernel, the following vulnerability has been resolved: drm/vc4: kms: Add missing drm_crtc_commit_put Commit 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit") introduced a global state for the HVS, with each FIFO storing the current CRTC commit so that we can properly synchronize commits. However, the refcounting was off and we thus ended up leaking the drm_crtc_commit structure every commit. Add a drm_crtc_commit_put to prevent the leakage. |
| CVE-2021-47533 | In the Linux kernel, the following vulnerability has been resolved: drm/vc4: kms: Clear the HVS FIFO commit pointer once done Commit 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit") introduced a wait on the previous commit done on a given HVS FIFO. However, we never cleared that pointer once done. Since drm_crtc_commit_put can free the drm_crtc_commit structure directly if we were the last user, this means that it can lead to a use-after free if we were to duplicate the state, and that stale pointer would even be copied to the new state. Set the pointer to NULL once we're done with the wait so that we don't carry over a pointer to a free'd structure. |
| CVE-2021-47532 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/devfreq: Fix OPP refcnt leak |
| CVE-2021-47531 | In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix mmap to include VM_IO and VM_DONTDUMP In commit 510410bfc034 ("drm/msm: Implement mmap as GEM object function") we switched to a new/cleaner method of doing things. That's good, but we missed a little bit. Before that commit, we used to _first_ run through the drm_gem_mmap_obj() case where `obj->funcs->mmap()` was NULL. That meant that we ran: vma->vm_flags |= VM_IO | VM_PFNMAP | VM_DONTEXPAND | VM_DONTDUMP; vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags)); vma->vm_page_prot = pgprot_decrypted(vma->vm_page_prot); ...and _then_ we modified those mappings with our own. Now that `obj->funcs->mmap()` is no longer NULL we don't run the default code. It looks like the fact that the vm_flags got VM_IO / VM_DONTDUMP was important because we're now getting crashes on Chromebooks that use ARC++ while logging out. Specifically a crash that looks like this (this is on a 5.10 kernel w/ relevant backports but also seen on a 5.15 kernel): Unable to handle kernel paging request at virtual address ffffffc008000000 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000008293d000 [ffffffc008000000] pgd=00000001002b3003, p4d=00000001002b3003, pud=00000001002b3003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP [...] CPU: 7 PID: 15734 Comm: crash_dump64 Tainted: G W 5.10.67 #1 [...] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT) pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) pc : __arch_copy_to_user+0xc0/0x30c lr : copyout+0xac/0x14c [...] Call trace: __arch_copy_to_user+0xc0/0x30c copy_page_to_iter+0x1a0/0x294 process_vm_rw_core+0x240/0x408 process_vm_rw+0x110/0x16c __arm64_sys_process_vm_readv+0x30/0x3c el0_svc_common+0xf8/0x250 do_el0_svc+0x30/0x80 el0_svc+0x10/0x1c el0_sync_handler+0x78/0x108 el0_sync+0x184/0x1c0 Code: f8408423 f80008c3 910020c6 36100082 (b8404423) Let's add the two flags back in. While we're at it, the fact that we aren't running the default means that we _don't_ need to clear out VM_PFNMAP, so remove that and save an instruction. NOTE: it was confirmed that VM_IO was the important flag to fix the problem I was seeing, but adding back VM_DONTDUMP seems like a sane thing to do so I'm doing that too. |
| CVE-2021-47530 | In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix wait_fence submitqueue leak We weren't dropping the submitqueue reference in all paths. In particular, when the fence has already been signalled. Split out a helper to simplify handling this in the various different return paths. |
| CVE-2021-47529 | In the Linux kernel, the following vulnerability has been resolved: iwlwifi: Fix memory leaks in error handling path Should an error occur (invalid TLV len or memory allocation failure), the memory already allocated in 'reduce_power_data' should be freed before returning, otherwise it is leaking. |
| CVE-2021-47528 | In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code. |
| CVE-2021-47527 | In the Linux kernel, the following vulnerability has been resolved: serial: core: fix transmit-buffer reset and memleak Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") converted serial core to use tty_port_close() but failed to notice that the transmit buffer still needs to be freed on final close. Not freeing the transmit buffer means that the buffer is no longer cleared on next open so that any ioctl() waiting for the buffer to drain might wait indefinitely (e.g. on termios changes) or that stale data can end up being transmitted in case tx is restarted. Furthermore, the buffer of any port that has been opened would leak on driver unbind. Note that the port lock is held when clearing the buffer pointer due to the ldisc race worked around by commit a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()"). Also note that the tty-port shutdown() callback is not called for console ports so it is not strictly necessary to free the buffer page after releasing the lock (cf. d72402145ace ("tty/serial: do not free trasnmit buffer page under port lock")). |
| CVE-2021-47526 | In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: Fix NULL pointer dereference in ->remove() drvdata has to be set in _probe() - otherwise platform_get_drvdata() causes null pointer dereference BUG in _remove(). |
| CVE-2021-47525 | In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: fix use-after-free and memleak on unbind Deregister the port when unbinding the driver to prevent it from being used after releasing the driver data and leaking memory allocated by serial core. |
| CVE-2021-47524 | In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: fix minor-number leak on probe errors Make sure to release the allocated minor number before returning on probe errors. |
| CVE-2021-47523 | In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix leak of rcvhdrtail_dummy_kvaddr This buffer is currently allocated in hfi1_init(): if (reinit) ret = init_after_reset(dd); else ret = loadtime_init(dd); if (ret) goto done; /* allocate dummy tail memory for all receive contexts */ dd->rcvhdrtail_dummy_kvaddr = dma_alloc_coherent(&dd->pcidev->dev, sizeof(u64), &dd->rcvhdrtail_dummy_dma, GFP_KERNEL); if (!dd->rcvhdrtail_dummy_kvaddr) { dd_dev_err(dd, "cannot allocate dummy tail memory\n"); ret = -ENOMEM; goto done; } The reinit triggered path will overwrite the old allocation and leak it. Fix by moving the allocation to hfi1_alloc_devdata() and the deallocation to hfi1_free_devdata(). |
| CVE-2021-47522 | In the Linux kernel, the following vulnerability has been resolved: HID: bigbenff: prevent null pointer dereference When emulating the device through uhid, there is a chance we don't have output reports and so report_field is null. |
| CVE-2021-47521 | In the Linux kernel, the following vulnerability has been resolved: can: sja1000: fix use after free in ems_pcmcia_add_card() If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead. Also we should check if at least one channel was set up. |
| CVE-2021-47520 | In the Linux kernel, the following vulnerability has been resolved: can: pch_can: pch_can_rx_normal: fix use after free After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue. |
| CVE-2021-47519 | In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_read_fifo: fix memory leak in error branch In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak. This patch adds a goto label to destroy the skb if an error occurs. Issue was found with GCC -fanalyzer, please follow the link below for details. |
| CVE-2021-47518 | In the Linux kernel, the following vulnerability has been resolved: nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done The done() netlink callback nfc_genl_dump_ses_done() should check if received argument is non-NULL, because its allocation could fail earlier in dumpit() (nfc_genl_dump_ses()). |
| CVE-2021-47517 | In the Linux kernel, the following vulnerability has been resolved: ethtool: do not perform operations on net devices being unregistered There is a short period between a net device starts to be unregistered and when it is actually gone. In that time frame ethtool operations could still be performed, which might end up in unwanted or undefined behaviours[1]. Do not allow ethtool operations after a net device starts its unregistration. This patch targets the netlink part as the ioctl one isn't affected: the reference to the net device is taken and the operation is executed within an rtnl lock section and the net device won't be found after unregister. [1] For example adding Tx queues after unregister ends up in NULL pointer exceptions and UaFs, such as: BUG: KASAN: use-after-free in kobject_get+0x14/0x90 Read of size 1 at addr ffff88801961248c by task ethtool/755 CPU: 0 PID: 755 Comm: ethtool Not tainted 5.15.0-rc6+ #778 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/014 Call Trace: dump_stack_lvl+0x57/0x72 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b kobject_get+0x14/0x90 kobject_add_internal+0x3d1/0x450 kobject_init_and_add+0xba/0xf0 netdev_queue_update_kobjects+0xcf/0x200 netif_set_real_num_tx_queues+0xb4/0x310 veth_set_channels+0x1c3/0x550 ethnl_set_channels+0x524/0x610 |
| CVE-2021-47516 | In the Linux kernel, the following vulnerability has been resolved: nfp: Fix memory leak in nfp_cpp_area_cache_add() In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a CPP area structure. But in line 807 (#2), when the cache is allocated failed, this CPP area structure is not freed, which will result in memory leak. We can fix it by freeing the CPP area when the cache is allocated failed (#2). 792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size) 793 { 794 struct nfp_cpp_area_cache *cache; 795 struct nfp_cpp_area *area; 800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0), 801 0, size); // #1: allocates and initializes 802 if (!area) 803 return -ENOMEM; 805 cache = kzalloc(sizeof(*cache), GFP_KERNEL); 806 if (!cache) 807 return -ENOMEM; // #2: missing free 817 return 0; 818 } |
| CVE-2021-47515 | In the Linux kernel, the following vulnerability has been resolved: seg6: fix the iif in the IPv6 socket control block When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving interface index into the IPv4 socket control block (v5.16-rc4, net/ipv4/ip_input.c line 510): IPCB(skb)->iif = skb->skb_iif; If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH header, the seg6_do_srh_encap(...) performs the required encapsulation. In this case, the seg6_do_srh_encap function clears the IPv6 socket control block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163): memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); The memset(...) was introduced in commit ef489749aae5 ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29). Since the IPv6 socket control block and the IPv4 socket control block share the same memory area (skb->cb), the receiving interface index info is lost (IP6CB(skb)->iif is set to zero). As a side effect, that condition triggers a NULL pointer dereference if commit 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev") is applied. To fix that issue, we set the IP6CB(skb)->iif with the index of the receiving interface once again. |
| CVE-2021-47514 | In the Linux kernel, the following vulnerability has been resolved: devlink: fix netns refcount leak in devlink_nl_cmd_reload() While preparing my patch series adding netns refcount tracking, I spotted bugs in devlink_nl_cmd_reload() Some error paths forgot to release a refcount on a netns. To fix this, we can reduce the scope of get_net()/put_net() section around the call to devlink_reload(). |
| CVE-2021-47513 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: Fix memory leak in felix_setup_mmio_filtering Avoid a memory leak if there is not a CPU port defined. Addresses-Coverity-ID: 1492897 ("Resource leak") Addresses-Coverity-ID: 1492899 ("Resource leak") |
| CVE-2021-47512 | In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_pie: prevent dismantle issue For some reason, fq_pie_destroy() did not copy working code from pie_destroy() and other qdiscs, thus causing elusive bug. Before calling del_timer_sync(&q->adapt_timer), we need to ensure timer will not rearm itself. rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-....: (4416 ticks this GP) idle=60d/1/0x4000000000000000 softirq=10433/10434 fqs=2579 (t=10501 jiffies g=13085 q=3989) NMI backtrace for cpu 0 CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343 print_cpu_stall kernel/rcu/tree_stall.h:627 [inline] check_cpu_stall kernel/rcu/tree_stall.h:711 [inline] rcu_pending kernel/rcu/tree.c:3878 [inline] rcu_sched_clock_irq.cold+0x9d/0x746 kernel/rcu/tree.c:2597 update_process_times+0x16d/0x200 kernel/time/timer.c:1785 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428 __run_hrtimer kernel/time/hrtimer.c:1685 [inline] __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:write_comp_data kernel/kcov.c:221 [inline] RIP: 0010:__sanitizer_cov_trace_const_cmp1+0x1d/0x80 kernel/kcov.c:273 Code: 54 c8 20 48 89 10 c3 66 0f 1f 44 00 00 53 41 89 fb 41 89 f1 bf 03 00 00 00 65 48 8b 0c 25 40 70 02 00 48 89 ce 4c 8b 54 24 08 <e8> 4e f7 ff ff 84 c0 74 51 48 8b 81 88 15 00 00 44 8b 81 84 15 00 RSP: 0018:ffffc90000d27b28 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888064bf1bf0 RCX: ffff888011928000 RDX: ffff888011928000 RSI: ffff888011928000 RDI: 0000000000000003 RBP: ffff888064bf1c28 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff875d8295 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8880783dd300 R14: 0000000000000000 R15: 0000000000000000 pie_calculate_probability+0x405/0x7c0 net/sched/sch_pie.c:418 fq_pie_timer+0x170/0x2a0 net/sched/sch_fq_pie.c:383 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421 expire_timers kernel/time/timer.c:1466 [inline] __run_timers.part.0+0x675/0xa20 kernel/time/timer.c:1734 __run_timers kernel/time/timer.c:1715 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 run_ksoftirqd kernel/softirq.c:921 [inline] run_ksoftirqd+0x2d/0x60 kernel/softirq.c:913 smpboot_thread_fn+0x645/0x9c0 kernel/smpboot.c:164 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> |
| CVE-2021-47511 | In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix negative period/buffer sizes The period size calculation in OSS layer may receive a negative value as an error, but the code there assumes only the positive values and handle them with size_t. Due to that, a too big value may be passed to the lower layers. This patch changes the code to handle with ssize_t and adds the proper error checks appropriately. |
| CVE-2021-47510 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix re-dirty process of tree-log nodes There is a report of a transaction abort of -EAGAIN with the following script. #!/bin/sh for d in sda sdb; do mkfs.btrfs -d single -m single -f /dev/\${d} done mount /dev/sda /mnt/test mount /dev/sdb /mnt/scratch for dir in test scratch; do echo 3 >/proc/sys/vm/drop_caches fio --directory=/mnt/\${dir} --name=fio.\${dir} --rw=read --size=50G --bs=64m \ --numjobs=$(nproc) --time_based --ramp_time=5 --runtime=480 \ --group_reporting |& tee /dev/shm/fio.\${dir} echo 3 >/proc/sys/vm/drop_caches done for d in sda sdb; do umount /dev/\${d} done The stack trace is shown in below. [3310.967991] BTRFS: error (device sda) in btrfs_commit_transaction:2341: errno=-11 unknown (Error while writing out transaction) [3310.968060] BTRFS info (device sda): forced readonly [3310.968064] BTRFS warning (device sda): Skipping commit of aborted transaction. [3310.968065] ------------[ cut here ]------------ [3310.968066] BTRFS: Transaction aborted (error -11) [3310.968074] WARNING: CPU: 14 PID: 1684 at fs/btrfs/transaction.c:1946 btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968131] CPU: 14 PID: 1684 Comm: fio Not tainted 5.14.10-300.fc35.x86_64 #1 [3310.968135] Hardware name: DIAWAY Tartu/Tartu, BIOS V2.01.B10 04/08/2021 [3310.968137] RIP: 0010:btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968144] RSP: 0018:ffffb284ce393e10 EFLAGS: 00010282 [3310.968147] RAX: 0000000000000026 RBX: ffff973f147b0f60 RCX: 0000000000000027 [3310.968149] RDX: ffff974ecf098a08 RSI: 0000000000000001 RDI: ffff974ecf098a00 [3310.968150] RBP: ffff973f147b0f08 R08: 0000000000000000 R09: ffffb284ce393c48 [3310.968151] R10: ffffb284ce393c40 R11: ffffffff84f47468 R12: ffff973f101bfc00 [3310.968153] R13: ffff971f20cf2000 R14: 00000000fffffff5 R15: ffff973f147b0e58 [3310.968154] FS: 00007efe65468740(0000) GS:ffff974ecf080000(0000) knlGS:0000000000000000 [3310.968157] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3310.968158] CR2: 000055691bcbe260 CR3: 000000105cfa4001 CR4: 0000000000770ee0 [3310.968160] PKRU: 55555554 [3310.968161] Call Trace: [3310.968167] ? dput+0xd4/0x300 [3310.968174] btrfs_sync_file+0x3f1/0x490 [3310.968180] __x64_sys_fsync+0x33/0x60 [3310.968185] do_syscall_64+0x3b/0x90 [3310.968190] entry_SYSCALL_64_after_hwframe+0x44/0xae [3310.968194] RIP: 0033:0x7efe6557329b [3310.968200] RSP: 002b:00007ffe0236ebc0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a [3310.968203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efe6557329b [3310.968204] RDX: 0000000000000000 RSI: 00007efe58d77010 RDI: 0000000000000006 [3310.968205] RBP: 0000000004000000 R08: 0000000000000000 R09: 00007efe58d77010 [3310.968207] R10: 0000000016cacc0c R11: 0000000000000293 R12: 00007efe5ce95980 [3310.968208] R13: 0000000000000000 R14: 00007efe6447c790 R15: 0000000c80000000 [3310.968212] ---[ end trace 1a346f4d3c0d96ba ]--- [3310.968214] BTRFS: error (device sda) in cleanup_transaction:1946: errno=-11 unknown The abort occurs because of a write hole while writing out freeing tree nodes of a tree-log tree. For zoned btrfs, we re-dirty a freed tree node to ensure btrfs can write the region and does not leave a hole on write on a zoned device. The current code fails to re-dirty a node when the tree-log tree's depth is greater or equal to 2. That leads to a transaction abort with -EAGAIN. Fix the issue by properly re-dirtying a node on walking up the tree. |
| CVE-2021-47509 | In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Limit the period size to 16MB Set the practical limit to the period size (the fragment shift in OSS) instead of a full 31bit; a too large value could lead to the exhaust of memory as we allocate temporary buffers of the period size, too. As of this patch, we set to 16MB limit, which should cover all use cases. |
| CVE-2021-47508 | In the Linux kernel, the following vulnerability has been resolved: btrfs: free exchange changeset on failures Fstests runs on my VMs have show several kmemleak reports like the following. unreferenced object 0xffff88811ae59080 (size 64): comm "xfs_io", pid 12124, jiffies 4294987392 (age 6.368s) hex dump (first 32 bytes): 00 c0 1c 00 00 00 00 00 ff cf 1c 00 00 00 00 00 ................ 90 97 e5 1a 81 88 ff ff 90 97 e5 1a 81 88 ff ff ................ backtrace: [<00000000ac0176d2>] ulist_add_merge+0x60/0x150 [btrfs] [<0000000076e9f312>] set_state_bits+0x86/0xc0 [btrfs] [<0000000014fe73d6>] set_extent_bit+0x270/0x690 [btrfs] [<000000004f675208>] set_record_extent_bits+0x19/0x20 [btrfs] [<00000000b96137b1>] qgroup_reserve_data+0x274/0x310 [btrfs] [<0000000057e9dcbb>] btrfs_check_data_free_space+0x5c/0xa0 [btrfs] [<0000000019c4511d>] btrfs_delalloc_reserve_space+0x1b/0xa0 [btrfs] [<000000006d37e007>] btrfs_dio_iomap_begin+0x415/0x970 [btrfs] [<00000000fb8a74b8>] iomap_iter+0x161/0x1e0 [<0000000071dff6ff>] __iomap_dio_rw+0x1df/0x700 [<000000002567ba53>] iomap_dio_rw+0x5/0x20 [<0000000072e555f8>] btrfs_file_write_iter+0x290/0x530 [btrfs] [<000000005eb3d845>] new_sync_write+0x106/0x180 [<000000003fb505bf>] vfs_write+0x24d/0x2f0 [<000000009bb57d37>] __x64_sys_pwrite64+0x69/0xa0 [<000000003eba3fdf>] do_syscall_64+0x43/0x90 In case brtfs_qgroup_reserve_data() or btrfs_delalloc_reserve_metadata() fail the allocated extent_changeset will not be freed. So in btrfs_check_data_free_space() and btrfs_delalloc_reserve_space() free the allocated extent_changeset to get rid of the allocated memory. The issue currently only happens in the direct IO write path, but only after 65b3c08606e5 ("btrfs: fix ENOSPC failure when attempting direct IO write into NOCOW range"), and also at defrag_one_locked_target(). Every other place is always calling extent_changeset_free() even if its call to btrfs_delalloc_reserve_space() or btrfs_check_data_free_space() has failed. |
| CVE-2021-47507 | In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix nsfd startup race (again) Commit bd5ae9288d64 ("nfsd: register pernet ops last, unregister first") has re-opened rpc_pipefs_event() race against nfsd_net_id registration (register_pernet_subsys()) which has been fixed by commit bb7ffbf29e76 ("nfsd: fix nsfd startup race triggering BUG_ON"). Restore the order of register_pernet_subsys() vs register_cld_notifier(). Add WARN_ON() to prevent a future regression. Crash info: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000012 CPU: 8 PID: 345 Comm: mount Not tainted 5.4.144-... #1 pc : rpc_pipefs_event+0x54/0x120 [nfsd] lr : rpc_pipefs_event+0x48/0x120 [nfsd] Call trace: rpc_pipefs_event+0x54/0x120 [nfsd] blocking_notifier_call_chain rpc_fill_super get_tree_keyed rpc_fs_get_tree vfs_get_tree do_mount ksys_mount __arm64_sys_mount el0_svc_handler el0_svc |
| CVE-2021-47506 | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix use-after-free due to delegation race A delegation break could arrive as soon as we've called vfs_setlease. A delegation break runs a callback which immediately (in nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru. If we then exit nfs4_set_delegation without hashing the delegation, it will be freed as soon as the callback is done with it, without ever being removed from del_recall_lru. Symptoms show up later as use-after-free or list corruption warnings, usually in the laundromat thread. I suspect aba2072f4523 "nfsd: grant read delegations to clients holding writes" made this bug easier to hit, but I looked as far back as v3.0 and it looks to me it already had the same problem. So I'm not sure where the bug was introduced; it may have been there from the beginning. |
| CVE-2021-47505 | In the Linux kernel, the following vulnerability has been resolved: aio: fix use-after-free due to missing POLLFREE handling signalfd_poll() and binder_poll() are special in that they use a waitqueue whose lifetime is the current task, rather than the struct file as is normally the case. This is okay for blocking polls, since a blocking poll occurs within one task; however, non-blocking polls require another solution. This solution is for the queue to be cleared before it is freed, by sending a POLLFREE notification to all waiters. Unfortunately, only eventpoll handles POLLFREE. A second type of non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't handle POLLFREE. This allows a use-after-free to occur if a signalfd or binder fd is polled with aio poll, and the waitqueue gets freed. Fix this by making aio poll handle POLLFREE. A patch by Ramji Jiyani <[email protected]> (https://lore.kernel.org/r/[email protected]) tried to do this by making aio_poll_wake() always complete the request inline if POLLFREE is seen. However, that solution had two bugs. First, it introduced a deadlock, as it unconditionally locked the aio context while holding the waitqueue lock, which inverts the normal locking order. Second, it didn't consider that POLLFREE notifications are missed while the request has been temporarily de-queued. The second problem was solved by my previous patch. This patch then properly fixes the use-after-free by handling POLLFREE in a deadlock-free way. It does this by taking advantage of the fact that freeing of the waitqueue is RCU-delayed, similar to what eventpoll does. |
| CVE-2021-47504 | In the Linux kernel, the following vulnerability has been resolved: io_uring: ensure task_work gets run as part of cancelations If we successfully cancel a work item but that work item needs to be processed through task_work, then we can be sleeping uninterruptibly in io_uring_cancel_generic() and never process it. Hence we don't make forward progress and we end up with an uninterruptible sleep warning. While in there, correct a comment that should be IFF, not IIF. |
| CVE-2021-47503 | In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc() Calling scsi_remove_host() before scsi_add_host() results in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000108 RIP: 0010:device_del+0x63/0x440 Call Trace: device_unregister+0x17/0x60 scsi_remove_host+0xee/0x2a0 pm8001_pci_probe+0x6ef/0x1b90 [pm80xx] local_pci_probe+0x3f/0x90 We cannot call scsi_remove_host() in pm8001_alloc() because scsi_add_host() has not been called yet at that point in time. Function call tree: pm8001_pci_probe() | `- pm8001_pci_alloc() | | | `- pm8001_alloc() | | | `- scsi_remove_host() | `- scsi_add_host() |
| CVE-2021-47502 | In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd934x: handle channel mappping list correctly Currently each channel is added as list to dai channel list, however there is danger of adding same channel to multiple dai channel list which endups corrupting the other list where its already added. This patch ensures that the channel is actually free before adding to the dai channel list and also ensures that the channel is on the list before deleting it. This check was missing previously, and we did not hit this issue as we were testing very simple usecases with sequence of amixer commands. |
| CVE-2021-47501 | In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL pointer dereference in i40e_dbg_dump_desc When trying to dump VFs VSI RX/TX descriptors using debugfs there was a crash due to NULL pointer dereference in i40e_dbg_dump_desc. Added a check to i40e_dbg_dump_desc that checks if VSI type is correct for dumping RX/TX descriptors. |
| CVE-2021-47500 | In the Linux kernel, the following vulnerability has been resolved: iio: mma8452: Fix trigger reference couting The mma8452 driver directly assigns a trigger to the struct iio_dev. The IIO core when done using this trigger will call `iio_trigger_put()` to drop the reference count by 1. Without the matching `iio_trigger_get()` in the driver the reference count can reach 0 too early, the trigger gets freed while still in use and a use-after-free occurs. Fix this by getting a reference to the trigger before assigning it to the IIO device. |
| CVE-2021-47499 | In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove When ACPI type is ACPI_SMO8500, the data->dready_trig will not be set, the memory allocated by iio_triggered_buffer_setup() will not be freed, and cause memory leak as follows: unreferenced object 0xffff888009551400 (size 512): comm "i2c-SMO8500-125", pid 911, jiffies 4294911787 (age 83.852s) hex dump (first 32 bytes): 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 20 e2 e5 c0 ff ff ff ff ........ ....... backtrace: [<0000000041ce75ee>] kmem_cache_alloc_trace+0x16d/0x360 [<000000000aeb17b0>] iio_kfifo_allocate+0x41/0x130 [kfifo_buf] [<000000004b40c1f5>] iio_triggered_buffer_setup_ext+0x2c/0x210 [industrialio_triggered_buffer] [<000000004375b15f>] kxcjk1013_probe+0x10c3/0x1d81 [kxcjk_1013] Fix it by remove data->dready_trig condition in probe and remove. |
| CVE-2021-47498 | In the Linux kernel, the following vulnerability has been resolved: dm rq: don't queue request to blk-mq during DM suspend DM uses blk-mq's quiesce/unquiesce to stop/start device mapper queue. But blk-mq's unquiesce may come from outside events, such as elevator switch, updating nr_requests or others, and request may come during suspend, so simply ask for blk-mq to requeue it. Fixes one kernel panic issue when running updating nr_requests and dm-mpath suspend/resume stress test. |
| CVE-2021-47497 | In the Linux kernel, the following vulnerability has been resolved: nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we subtract one from that making a large number that is then shifted more than the number of bits that fit into an unsigned long. UBSAN reports this problem: UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8 shift exponent 64 is too large for 64-bit type 'unsigned long' CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ #9 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x170 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 ubsan_epilogue+0x10/0x54 __ubsan_handle_shift_out_of_bounds+0x180/0x194 __nvmem_cell_read+0x1ec/0x21c nvmem_cell_read+0x58/0x94 nvmem_cell_read_variable_common+0x4c/0xb0 nvmem_cell_read_variable_le_u32+0x40/0x100 a6xx_gpu_init+0x170/0x2f4 adreno_bind+0x174/0x284 component_bind_all+0xf0/0x264 msm_drm_bind+0x1d8/0x7a0 try_to_bring_up_master+0x164/0x1ac __component_add+0xbc/0x13c component_add+0x20/0x2c dp_display_probe+0x340/0x384 platform_probe+0xc0/0x100 really_probe+0x110/0x304 __driver_probe_device+0xb8/0x120 driver_probe_device+0x4c/0xfc __device_attach_driver+0xb0/0x128 bus_for_each_drv+0x90/0xdc __device_attach+0xc8/0x174 device_initial_probe+0x20/0x2c bus_probe_device+0x40/0xa4 deferred_probe_work_func+0x7c/0xb8 process_one_work+0x128/0x21c process_scheduled_works+0x40/0x54 worker_thread+0x1ec/0x2a8 kthread+0x138/0x158 ret_from_fork+0x10/0x20 Fix it by making sure there are any bits to mask out. |
| CVE-2021-47496 | In the Linux kernel, the following vulnerability has been resolved: net/tls: Fix flipped sign in tls_err_abort() calls sk->sk_err appears to expect a positive value, a convention that ktls doesn't always follow and that leads to memory corruption in other code. For instance, [kworker] tls_encrypt_done(..., err=<negative error from crypto request>) tls_err_abort(.., err) sk->sk_err = err; [task] splice_from_pipe_feed ... tls_sw_do_sendpage if (sk->sk_err) { ret = -sk->sk_err; // ret is positive splice_from_pipe_feed (continued) ret = actor(...) // ret is still positive and interpreted as bytes // written, resulting in underflow of buf->len and // sd->len, leading to huge buf->offset and bogus // addresses computed in later calls to actor() Fix all tls_err_abort() callers to pass a negative error code consistently and centralize the error-prone sign flip there, throwing in a warning to catch future misuse and uninlining the function so it really does only warn once. |
| CVE-2021-47495 | In the Linux kernel, the following vulnerability has been resolved: usbnet: sanity check for maxpacket maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues |
| CVE-2021-47494 | In the Linux kernel, the following vulnerability has been resolved: cfg80211: fix management registrations locking The management registrations locking was broken, the list was locked for each wdev, but cfg80211_mgmt_registrations_update() iterated it without holding all the correct spinlocks, causing list corruption. Rather than trying to fix it with fine-grained locking, just move the lock to the wiphy/rdev (still need the list on each wdev), we already need to hold the wdev lock to change it, so there's no contention on the lock in any case. This trivially fixes the bug since we hold one wdev's lock already, and now will hold the lock that protects all lists. |
| CVE-2021-47493 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix race between searching chunks and release journal_head from buffer_head Encountered a race between ocfs2_test_bg_bit_allocatable() and jbd2_journal_put_journal_head() resulting in the below vmcore. PID: 106879 TASK: ffff880244ba9c00 CPU: 2 COMMAND: "loop3" Call trace: panic oops_end no_context __bad_area_nosemaphore bad_area_nosemaphore __do_page_fault do_page_fault page_fault [exception RIP: ocfs2_block_group_find_clear_bits+316] ocfs2_block_group_find_clear_bits [ocfs2] ocfs2_cluster_group_search [ocfs2] ocfs2_search_chain [ocfs2] ocfs2_claim_suballoc_bits [ocfs2] __ocfs2_claim_clusters [ocfs2] ocfs2_claim_clusters [ocfs2] ocfs2_local_alloc_slide_window [ocfs2] ocfs2_reserve_local_alloc_bits [ocfs2] ocfs2_reserve_clusters_with_limit [ocfs2] ocfs2_reserve_clusters [ocfs2] ocfs2_lock_refcount_allocators [ocfs2] ocfs2_make_clusters_writable [ocfs2] ocfs2_replace_cow [ocfs2] ocfs2_refcount_cow [ocfs2] ocfs2_file_write_iter [ocfs2] lo_rw_aio loop_queue_work kthread_worker_fn kthread ret_from_fork When ocfs2_test_bg_bit_allocatable() called bh2jh(bg_bh), the bg_bh->b_private NULL as jbd2_journal_put_journal_head() raced and released the jounal head from the buffer head. Needed to take bit lock for the bit 'BH_JournalHead' to fix this race. |
| CVE-2021-47492 | In the Linux kernel, the following vulnerability has been resolved: mm, thp: bail out early in collapse_file for writeback page Currently collapse_file does not explicitly check PG_writeback, instead, page_has_private and try_to_release_page are used to filter writeback pages. This does not work for xfs with blocksize equal to or larger than pagesize, because in such case xfs has no page->private. This makes collapse_file bail out early for writeback page. Otherwise, xfs end_page_writeback will panic as follows. page:fffffe00201bcc80 refcount:0 mapcount:0 mapping:ffff0003f88c86a8 index:0x0 pfn:0x84ef32 aops:xfs_address_space_operations [xfs] ino:30000b7 dentry name:"libtest.so" flags: 0x57fffe0000008027(locked|referenced|uptodate|active|writeback) raw: 57fffe0000008027 ffff80001b48bc28 ffff80001b48bc28 ffff0003f88c86a8 raw: 0000000000000000 0000000000000000 00000000ffffffff ffff0000c3e9a000 page dumped because: VM_BUG_ON_PAGE(((unsigned int) page_ref_count(page) + 127u <= 127u)) page->mem_cgroup:ffff0000c3e9a000 ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:1212! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: BUG: Bad page state in process khugepaged pfn:84ef32 xfs(E) page:fffffe00201bcc80 refcount:0 mapcount:0 mapping:0 index:0x0 pfn:0x84ef32 libcrc32c(E) rfkill(E) aes_ce_blk(E) crypto_simd(E) ... CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Tainted: ... pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) Call trace: end_page_writeback+0x1c0/0x214 iomap_finish_page_writeback+0x13c/0x204 iomap_finish_ioend+0xe8/0x19c iomap_writepage_end_bio+0x38/0x50 bio_endio+0x168/0x1ec blk_update_request+0x278/0x3f0 blk_mq_end_request+0x34/0x15c virtblk_request_done+0x38/0x74 [virtio_blk] blk_done_softirq+0xc4/0x110 __do_softirq+0x128/0x38c __irq_exit_rcu+0x118/0x150 irq_exit+0x1c/0x30 __handle_domain_irq+0x8c/0xf0 gic_handle_irq+0x84/0x108 el1_irq+0xcc/0x180 arch_cpu_idle+0x18/0x40 default_idle_call+0x4c/0x1a0 cpuidle_idle_call+0x168/0x1e0 do_idle+0xb4/0x104 cpu_startup_entry+0x30/0x9c secondary_start_kernel+0x104/0x180 Code: d4210000 b0006161 910c8021 94013f4d (d4210000) ---[ end trace 4a88c6a074082f8c ]--- Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt |
| CVE-2021-47491 | In the Linux kernel, the following vulnerability has been resolved: mm: khugepaged: skip huge page collapse for special files The read-only THP for filesystems will collapse THP for files opened readonly and mapped with VM_EXEC. The intended usecase is to avoid TLB misses for large text segments. But it doesn't restrict the file types so a THP could be collapsed for a non-regular file, for example, block device, if it is opened readonly and mapped with EXEC permission. This may cause bugs, like [1] and [2]. This is definitely not the intended usecase, so just collapse THP for regular files in order to close the attack surface. [[email protected]: fix vm_file check [3]] |
| CVE-2021-47490 | In the Linux kernel, the following vulnerability has been resolved: drm/ttm: fix memleak in ttm_transfered_destroy We need to cleanup the fences for ghost objects as well. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214029 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214447 |
| CVE-2021-47489 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix even more out of bound writes from debugfs CVE-2021-42327 was fixed by: commit f23750b5b3d98653b31d4469592935ef6364ad67 Author: Thelford Williams <[email protected]> Date: Wed Oct 13 16:04:13 2021 -0400 drm/amdgpu: fix out of bounds write but amdgpu_dm_debugfs.c contains more of the same issue so fix the remaining ones. v2: * Add missing fix in dp_max_bpc_write (Harry Wentland) |
| CVE-2021-47488 | In the Linux kernel, the following vulnerability has been resolved: cgroup: Fix memory leak caused by missing cgroup_bpf_offline When enabling CONFIG_CGROUP_BPF, kmemleak can be observed by running the command as below: $mount -t cgroup -o none,name=foo cgroup cgroup/ $umount cgroup/ unreferenced object 0xc3585c40 (size 64): comm "mount", pid 425, jiffies 4294959825 (age 31.990s) hex dump (first 32 bytes): 01 00 00 80 84 8c 28 c0 00 00 00 00 00 00 00 00 ......(......... 00 00 00 00 00 00 00 00 6c 43 a0 c3 00 00 00 00 ........lC...... backtrace: [<e95a2f9e>] cgroup_bpf_inherit+0x44/0x24c [<1f03679c>] cgroup_setup_root+0x174/0x37c [<ed4b0ac5>] cgroup1_get_tree+0x2c0/0x4a0 [<f85b12fd>] vfs_get_tree+0x24/0x108 [<f55aec5c>] path_mount+0x384/0x988 [<e2d5e9cd>] do_mount+0x64/0x9c [<208c9cfe>] sys_mount+0xfc/0x1f4 [<06dd06e0>] ret_fast_syscall+0x0/0x48 [<a8308cb3>] 0xbeb4daa8 This is because that since the commit 2b0d3d3e4fcf ("percpu_ref: reduce memory footprint of percpu_ref in fast path") root_cgrp->bpf.refcnt.data is allocated by the function percpu_ref_init in cgroup_bpf_inherit which is called by cgroup_setup_root when mounting, but not freed along with root_cgrp when umounting. Adding cgroup_bpf_offline which calls percpu_ref_kill to cgroup_kill_sb can free root_cgrp->bpf.refcnt.data in umount path. This patch also fixes the commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself"). A cgroup_bpf_offline is needed to do a cleanup that frees the resources which are allocated by cgroup_bpf_inherit in cgroup_setup_root. And inside cgroup_bpf_offline, cgroup_get() is at the beginning and cgroup_put is at the end of cgroup_bpf_release which is called by cgroup_bpf_offline. So cgroup_bpf_offline can keep the balance of cgroup's refcount. |
| CVE-2021-47486 | In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix potential NULL dereference The bpf_jit_binary_free() function requires a non-NULL argument. When the RISC-V BPF JIT fails to converge in NR_JIT_ITERATIONS steps, jit_data->header will be NULL, which triggers a NULL dereference. Avoid this by checking the argument, prior calling the function. |
| CVE-2021-47485 | In the Linux kernel, the following vulnerability has been resolved: IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields Overflowing either addrlimit or bytes_togo can allow userspace to trigger a buffer overflow of kernel memory. Check for overflows in all the places doing math on user controlled buffers. |
| CVE-2021-47484 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix possible null pointer dereference. This patch fixes possible null pointer dereference in files "rvu_debugfs.c" and "rvu_nix.c" |
| CVE-2021-47483 | In the Linux kernel, the following vulnerability has been resolved: regmap: Fix possible double-free in regcache_rbtree_exit() In regcache_rbtree_insert_to_block(), when 'present' realloc failed, the 'blk' which is supposed to assign to 'rbnode->block' will be freed, so 'rbnode->block' points a freed memory, in the error handling path of regcache_rbtree_init(), 'rbnode->block' will be freed again in regcache_rbtree_exit(), KASAN will report double-free as follows: BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390 Call Trace: slab_free_freelist_hook+0x10d/0x240 kfree+0xce/0x390 regcache_rbtree_exit+0x15d/0x1a0 regcache_rbtree_init+0x224/0x2c0 regcache_init+0x88d/0x1310 __regmap_init+0x3151/0x4a80 __devm_regmap_init+0x7d/0x100 madera_spi_probe+0x10f/0x333 [madera_spi] spi_probe+0x183/0x210 really_probe+0x285/0xc30 To fix this, moving up the assignment of rbnode->block to immediately after the reallocation has succeeded so that the data structure stays valid even if the second reallocation fails. |
| CVE-2021-47482 | In the Linux kernel, the following vulnerability has been resolved: net: batman-adv: fix error handling Syzbot reported ODEBUG warning in batadv_nc_mesh_free(). The problem was in wrong error handling in batadv_mesh_init(). Before this patch batadv_mesh_init() was calling batadv_mesh_free() in case of any batadv_*_init() calls failure. This approach may work well, when there is some kind of indicator, which can tell which parts of batadv are initialized; but there isn't any. All written above lead to cleaning up uninitialized fields. Even if we hide ODEBUG warning by initializing bat_priv->nc.work, syzbot was able to hit GPF in batadv_nc_purge_paths(), because hash pointer in still NULL. [1] To fix these bugs we can unwind batadv_*_init() calls one by one. It is good approach for 2 reasons: 1) It fixes bugs on error handling path 2) It improves the performance, since we won't call unneeded batadv_*_free() functions. So, this patch makes all batadv_*_init() clean up all allocated memory before returning with an error to no call correspoing batadv_*_free() and open-codes batadv_mesh_free() with proper order to avoid touching uninitialized fields. |
| CVE-2021-47481 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Initialize the ODP xarray when creating an ODP MR Normally the zero fill would hide the missing initialization, but an errant set to desc_size in reg_create() causes a crash: BUG: unable to handle page fault for address: 0000000800000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 5 PID: 890 Comm: ib_write_bw Not tainted 5.15.0-rc4+ #47 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_ib_dereg_mr+0x14/0x3b0 [mlx5_ib] Code: 48 63 cd 4c 89 f7 48 89 0c 24 e8 37 30 03 e1 48 8b 0c 24 eb a0 90 0f 1f 44 00 00 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 30 <48> 8b 2f 65 48 8b 04 25 28 00 00 00 48 89 44 24 28 31 c0 8b 87 c8 RSP: 0018:ffff88811afa3a60 EFLAGS: 00010286 RAX: 000000000000001c RBX: 0000000800000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000800000000 RBP: 0000000800000000 R08: 0000000000000000 R09: c0000000fffff7ff R10: ffff88811afa38f8 R11: ffff88811afa38f0 R12: ffffffffa02c7ac0 R13: 0000000000000000 R14: ffff88811afa3cd8 R15: ffff88810772fa00 FS: 00007f47b9080740(0000) GS:ffff88852cd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000800000000 CR3: 000000010761e003 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_ib_free_odp_mr+0x95/0xc0 [mlx5_ib] mlx5_ib_dereg_mr+0x128/0x3b0 [mlx5_ib] ib_dereg_mr_user+0x45/0xb0 [ib_core] ? xas_load+0x8/0x80 destroy_hw_idr_uobject+0x1a/0x50 [ib_uverbs] uverbs_destroy_uobject+0x2f/0x150 [ib_uverbs] uobj_destroy+0x3c/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x467/0xb00 [ib_uverbs] ? uverbs_finalize_object+0x60/0x60 [ib_uverbs] ? ttwu_queue_wakelist+0xa9/0xe0 ? pty_write+0x85/0x90 ? file_tty_write.isra.33+0x214/0x330 ? process_echoes+0x60/0x60 ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs] __x64_sys_ioctl+0x10d/0x8e0 ? vfs_write+0x17f/0x260 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Add the missing xarray initialization and remove the desc_size set. |
| CVE-2021-47480 | In the Linux kernel, the following vulnerability has been resolved: scsi: core: Put LLD module refcnt after SCSI device is released SCSI host release is triggered when SCSI device is freed. We have to make sure that the low-level device driver module won't be unloaded before SCSI host instance is released because shost->hostt is required in the release handler. Make sure to put LLD module refcnt after SCSI device is released. Fixes a kernel panic of 'BUG: unable to handle page fault for address' reported by Changhui and Yi. |
| CVE-2021-47479 | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix use-after-free in rtl8712_dl_fw Syzbot reported use-after-free in rtl8712_dl_fw(). The problem was in race condition between r871xu_dev_remove() ->ndo_open() callback. It's easy to see from crash log, that driver accesses released firmware in ->ndo_open() callback. It may happen, since driver was releasing firmware _before_ unregistering netdev. Fix it by moving unregister_netdev() before cleaning up resources. Call Trace: ... rtl871x_open_fw drivers/staging/rtl8712/hal_init.c:83 [inline] rtl8712_dl_fw+0xd95/0xe10 drivers/staging/rtl8712/hal_init.c:170 rtl8712_hal_init drivers/staging/rtl8712/hal_init.c:330 [inline] rtl871x_hal_init+0xae/0x180 drivers/staging/rtl8712/hal_init.c:394 netdev_open+0xe6/0x6c0 drivers/staging/rtl8712/os_intfs.c:380 __dev_open+0x2bc/0x4d0 net/core/dev.c:1484 Freed by task 1306: ... release_firmware+0x1b/0x30 drivers/base/firmware_loader/main.c:1053 r871xu_dev_remove+0xcc/0x2c0 drivers/staging/rtl8712/usb_intf.c:599 usb_unbind_interface+0x1d8/0x8d0 drivers/usb/core/driver.c:458 |
| CVE-2021-47478 | In the Linux kernel, the following vulnerability has been resolved: isofs: Fix out of bound access for corrupted isofs image When isofs image is suitably corrupted isofs_read_inode() can read data beyond the end of buffer. Sanity-check the directory entry length before using it. |
| CVE-2021-47477 | In the Linux kernel, the following vulnerability has been resolved: comedi: dt9812: fix DMA buffers on stack USB transfer buffers are typically mapped for DMA and must not be allocated on the stack or transfers will fail. Allocate proper transfer buffers in the various command helpers and return an error on short transfers instead of acting on random stack data. Note that this also fixes a stack info leak on systems where DMA is not used as 32 bytes are always sent to the device regardless of how short the command is. |
| CVE-2021-47476 | In the Linux kernel, the following vulnerability has been resolved: comedi: ni_usb6501: fix NULL-deref in command paths The driver uses endpoint-sized USB transfer buffers but had no sanity checks on the sizes. This can lead to zero-size-pointer dereferences or overflowed transfer buffers in ni6501_port_command() and ni6501_counter_command() if a (malicious) device has smaller max-packet sizes than expected (or when doing descriptor fuzz testing). Add the missing sanity checks to probe(). |
| CVE-2021-47475 | In the Linux kernel, the following vulnerability has been resolved: comedi: vmk80xx: fix transfer-buffer overflows The driver uses endpoint-sized USB transfer buffers but up until recently had no sanity checks on the sizes. Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize of usb endpoints found") inadvertently fixed NULL-pointer dereferences when accessing the transfer buffers in case a malicious device has a zero wMaxPacketSize. Make sure to allocate buffers large enough to handle also the other accesses that are done without a size check (e.g. byte 18 in vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond the buffers, for example, when doing descriptor fuzzing. The original driver was for a low-speed device with 8-byte buffers. Support was later added for a device that uses bulk transfers and is presumably a full-speed device with a maximum 64-byte wMaxPacketSize. |
| CVE-2021-47474 | In the Linux kernel, the following vulnerability has been resolved: comedi: vmk80xx: fix bulk-buffer overflow The driver is using endpoint-sized buffers but must not assume that the tx and rx buffers are of equal size or a malicious device could overflow the slab-allocated receive buffer when doing bulk transfers. |
| CVE-2021-47473 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els() Commit 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()"), intended to change: bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN bsg_job->request->msgcode != FC_BSG_RPT_ELS but changed it to: bsg_job->request->msgcode == FC_BSG_RPT_ELS instead. Change the == to a != to avoid leaking the fcport structure or freeing unallocated memory. |
| CVE-2021-47471 | In the Linux kernel, the following vulnerability has been resolved: drm: mxsfb: Fix NULL pointer dereference crash on unload The mxsfb->crtc.funcs may already be NULL when unloading the driver, in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from mxsfb_unload() leads to NULL pointer dereference. Since all we care about is masking the IRQ and mxsfb->base is still valid, just use that to clear and mask the IRQ. |
| CVE-2021-47470 | In the Linux kernel, the following vulnerability has been resolved: mm, slub: fix potential use-after-free in slab_debugfs_fops When sysfs_slab_add failed, we shouldn't call debugfs_slab_add() for s because s will be freed soon. And slab_debugfs_fops will use s later leading to a use-after-free. |
| CVE-2021-47469 | In the Linux kernel, the following vulnerability has been resolved: spi: Fix deadlock when adding SPI controllers on SPI buses Currently we have a global spi_add_lock which we take when adding new devices so that we can check that we're not trying to reuse a chip select that's already controlled. This means that if the SPI device is itself a SPI controller and triggers the instantiation of further SPI devices we trigger a deadlock as we try to register and instantiate those devices while in the process of doing so for the parent controller and hence already holding the global spi_add_lock. Since we only care about concurrency within a single SPI bus move the lock to be per controller, avoiding the deadlock. This can be easily triggered in the case of spi-mux. |
| CVE-2021-47468 | In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: Fix sleeping function called from invalid context The driver can call card->isac.release() function from an atomic context. Fix this by calling this function after releasing the lock. The following log reveals it: [ 44.168226 ] BUG: sleeping function called from invalid context at kernel/workqueue.c:3018 [ 44.168941 ] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 5475, name: modprobe [ 44.169574 ] INFO: lockdep is turned off. [ 44.169899 ] irq event stamp: 0 [ 44.170160 ] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 44.170627 ] hardirqs last disabled at (0): [<ffffffff814209ed>] copy_process+0x132d/0x3e00 [ 44.171240 ] softirqs last enabled at (0): [<ffffffff81420a1a>] copy_process+0x135a/0x3e00 [ 44.171852 ] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 44.172318 ] Preemption disabled at: [ 44.172320 ] [<ffffffffa009b0a9>] nj_release+0x69/0x500 [netjet] [ 44.174441 ] Call Trace: [ 44.174630 ] dump_stack_lvl+0xa8/0xd1 [ 44.174912 ] dump_stack+0x15/0x17 [ 44.175166 ] ___might_sleep+0x3a2/0x510 [ 44.175459 ] ? nj_release+0x69/0x500 [netjet] [ 44.175791 ] __might_sleep+0x82/0xe0 [ 44.176063 ] ? start_flush_work+0x20/0x7b0 [ 44.176375 ] start_flush_work+0x33/0x7b0 [ 44.176672 ] ? trace_irq_enable_rcuidle+0x85/0x170 [ 44.177034 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177372 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177711 ] __flush_work+0x11a/0x1a0 [ 44.177991 ] ? flush_work+0x20/0x20 [ 44.178257 ] ? lock_release+0x13c/0x8f0 [ 44.178550 ] ? __kasan_check_write+0x14/0x20 [ 44.178872 ] ? do_raw_spin_lock+0x148/0x360 [ 44.179187 ] ? read_lock_is_recursive+0x20/0x20 [ 44.179530 ] ? __kasan_check_read+0x11/0x20 [ 44.179846 ] ? do_raw_spin_unlock+0x55/0x900 [ 44.180168 ] ? ____kasan_slab_free+0x116/0x140 [ 44.180505 ] ? _raw_spin_unlock_irqrestore+0x41/0x60 [ 44.180878 ] ? skb_queue_purge+0x1a3/0x1c0 [ 44.181189 ] ? kfree+0x13e/0x290 [ 44.181438 ] flush_work+0x17/0x20 [ 44.181695 ] mISDN_freedchannel+0xe8/0x100 [ 44.182006 ] isac_release+0x210/0x260 [mISDNipac] [ 44.182366 ] nj_release+0xf6/0x500 [netjet] [ 44.182685 ] nj_remove+0x48/0x70 [netjet] [ 44.182989 ] pci_device_remove+0xa9/0x250 |
| CVE-2021-47467 | In the Linux kernel, the following vulnerability has been resolved: kunit: fix reference count leak in kfree_at_end The reference counting issue happens in the normal path of kfree_at_end(). When kunit_alloc_and_get_resource() is invoked, the function forgets to handle the returned resource object, whose refcount increased inside, causing a refcount leak. Fix this issue by calling kunit_alloc_resource() instead of kunit_alloc_and_get_resource(). Fixed the following when applying: Shuah Khan <[email protected]> CHECK: Alignment should match open parenthesis + kunit_alloc_resource(test, NULL, kfree_res_free, GFP_KERNEL, (void *)to_free); |
| CVE-2021-47466 | In the Linux kernel, the following vulnerability has been resolved: mm, slub: fix potential memoryleak in kmem_cache_open() In error path, the random_seq of slub cache might be leaked. Fix this by using __kmem_cache_release() to release all the relevant resources. |
| CVE-2021-47465 | In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest() In commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") kvm_start_guest() became idle_kvm_start_guest(). The old code allocated a stack frame on the emergency stack, but didn't use the frame to store anything, and also didn't store anything in its caller's frame. idle_kvm_start_guest() on the other hand is written more like a normal C function, it creates a frame on entry, and also stores CR/LR into its callers frame (per the ABI). The problem is that there is no caller frame on the emergency stack. The emergency stack for a given CPU is allocated with: paca_ptrs[i]->emergency_sp = alloc_stack(limit, i) + THREAD_SIZE; So emergency_sp actually points to the first address above the emergency stack allocation for a given CPU, we must not store above it without first decrementing it to create a frame. This is different to the regular kernel stack, paca->kstack, which is initialised to point at an initial frame that is ready to use. idle_kvm_start_guest() stores the backchain, CR and LR all of which write outside the allocation for the emergency stack. It then creates a stack frame and saves the non-volatile registers. Unfortunately the frame it creates is not large enough to fit the non-volatiles, and so the saving of the non-volatile registers also writes outside the emergency stack allocation. The end result is that we corrupt whatever is at 0-24 bytes, and 112-248 bytes above the emergency stack allocation. In practice this has gone unnoticed because the memory immediately above the emergency stack happens to be used for other stack allocations, either another CPUs mc_emergency_sp or an IRQ stack. See the order of calls to irqstack_early_init() and emergency_stack_init(). The low addresses of another stack are the top of that stack, and so are only used if that stack is under extreme pressue, which essentially never happens in practice - and if it did there's a high likelyhood we'd crash due to that stack overflowing. Still, we shouldn't be corrupting someone else's stack, and it is purely luck that we aren't corrupting something else. To fix it we save CR/LR into the caller's frame using the existing r1 on entry, we then create a SWITCH_FRAME_SIZE frame (which has space for pt_regs) on the emergency stack with the backchain pointing to the existing stack, and then finally we switch to the new frame on the emergency stack. |
| CVE-2021-47464 | In the Linux kernel, the following vulnerability has been resolved: audit: fix possible null-pointer dereference in audit_filter_rules Fix possible null-pointer dereference in audit_filter_rules. audit_filter_rules() error: we previously assumed 'ctx' could be null |
| CVE-2021-47463 | In the Linux kernel, the following vulnerability has been resolved: mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem() Check for a NULL page->mapping before dereferencing the mapping in page_is_secretmem(), as the page's mapping can be nullified while gup() is running, e.g. by reclaim or truncation. BUG: kernel NULL pointer dereference, address: 0000000000000068 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 4173897 Comm: CPU 3/KVM Tainted: G W RIP: 0010:internal_get_user_pages_fast+0x621/0x9d0 Code: <48> 81 7a 68 80 08 04 bc 0f 85 21 ff ff 8 89 c7 be RSP: 0018:ffffaa90087679b0 EFLAGS: 00010046 RAX: ffffe3f37905b900 RBX: 00007f2dd561e000 RCX: ffffe3f37905b934 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffe3f37905b900 ... CR2: 0000000000000068 CR3: 00000004c5898003 CR4: 00000000001726e0 Call Trace: get_user_pages_fast_only+0x13/0x20 hva_to_pfn+0xa9/0x3e0 try_async_pf+0xa1/0x270 direct_page_fault+0x113/0xad0 kvm_mmu_page_fault+0x69/0x680 vmx_handle_exit+0xe1/0x5d0 kvm_arch_vcpu_ioctl_run+0xd81/0x1c70 kvm_vcpu_ioctl+0x267/0x670 __x64_sys_ioctl+0x83/0xa0 do_syscall_64+0x56/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47462 | In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind() syzbot reported access to unitialized memory in mbind() [1] Issue came with commit bda420b98505 ("numa balancing: migrate on fault among multiple bound nodes") This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in do_set_mempolicy() This patch moves the check in sanitize_mpol_flags() so that it is also used by mbind() [1] BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_alloc_node mm/slub.c:3221 [inline] slab_alloc mm/slub.c:3230 [inline] kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235 mpol_new mm/mempolicy.c:293 [inline] do_mbind+0x912/0x15f0 mm/mempolicy.c:1289 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae ===================================================== Kernel panic - not syncing: panic_on_kmsan set ... CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G B 5.15.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106 dump_stack+0x25/0x28 lib/dump_stack.c:113 panic+0x44f/0xdeb kernel/panic.c:232 kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186 __msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47461 | In the Linux kernel, the following vulnerability has been resolved: userfaultfd: fix a race between writeprotect and exit_mmap() A race is possible when a process exits, its VMAs are removed by exit_mmap() and at the same time userfaultfd_writeprotect() is called. The race was detected by KASAN on a development kernel, but it appears to be possible on vanilla kernels as well. Use mmget_not_zero() to prevent the race as done in other userfaultfd operations. |
| CVE-2021-47460 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption after conversion from inline format Commit 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") uncovered a latent bug in ocfs2 conversion from inline inode format to a normal inode format. The code in ocfs2_convert_inline_data_to_extents() attempts to zero out the whole cluster allocated for file data by grabbing, zeroing, and dirtying all pages covering this cluster. However these pages are beyond i_size, thus writeback code generally ignores these dirty pages and no blocks were ever actually zeroed on the disk. This oversight was fixed by commit 693c241a5f6a ("ocfs2: No need to zero pages past i_size.") for standard ocfs2 write path, inline conversion path was apparently forgotten; the commit log also has a reasoning why the zeroing actually is not needed. After commit 6dbf7bb55598, things became worse as writeback code stopped invalidating buffers on pages beyond i_size and thus these pages end up with clean PageDirty bit but with buffers attached to these pages being still dirty. So when a file is converted from inline format, then writeback triggers, and then the file is grown so that these pages become valid, the invalid dirtiness state is preserved, mark_buffer_dirty() does nothing on these pages (buffers are already dirty) but page is never written back because it is clean. So data written to these pages is lost once pages are reclaimed. Simple reproducer for the problem is: xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \ -c "pwrite 4000 2000" ocfs2_file After unmounting and mounting the fs again, you can observe that end of 'ocfs2_file' has lost its contents. Fix the problem by not doing the pointless zeroing during conversion from inline format similarly as in the standard write path. [[email protected]: fix whitespace, per Joseph] |
| CVE-2021-47459 | In the Linux kernel, the following vulnerability has been resolved: can: j1939: j1939_netdev_start(): fix UAF for rx_kref of j1939_priv It will trigger UAF for rx_kref of j1939_priv as following. cpu0 cpu1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start j1939_priv_set j1939_priv_get_by_ndev_locked j1939_jsk_add ..... j1939_netdev_stop kref_put_lock(&priv->rx_kref, ...) kref_get(&priv->rx_kref, ...) REFCOUNT_WARN("addition on 0;...") ==================================================== refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 20874 at lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0 RIP: 0010:refcount_warn_saturate+0x169/0x1e0 Call Trace: j1939_netdev_start+0x68b/0x920 j1939_sk_bind+0x426/0xeb0 ? security_socket_bind+0x83/0xb0 The rx_kref's kref_get() and kref_put() should use j1939_netdev_lock to protect. |
| CVE-2021-47458 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: mount fails with buffer overflow in strlen Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the trace below. Problem seems to be that strings for cluster stack and cluster name are not guaranteed to be null terminated in the disk representation, while strlcpy assumes that the source string is always null terminated. This causes a read outside of the source string triggering the buffer overflow detection. detected buffer overflow in strlen ------------[ cut here ]------------ kernel BUG at lib/string.c:1149! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1 Debian 5.14.6-2 RIP: 0010:fortify_panic+0xf/0x11 ... Call Trace: ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2] ocfs2_fill_super+0x359/0x19b0 [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x454/0xa20 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47457 | In the Linux kernel, the following vulnerability has been resolved: can: isotp: isotp_sendmsg(): add result check for wait_event_interruptible() Using wait_event_interruptible() to wait for complete transmission, but do not check the result of wait_event_interruptible() which can be interrupted. It will result in TX buffer has multiple accessors and the later process interferes with the previous process. Following is one of the problems reported by syzbot. ============================================================= WARNING: CPU: 0 PID: 0 at net/can/isotp.c:840 isotp_tx_timer_handler+0x2e0/0x4c0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:isotp_tx_timer_handler+0x2e0/0x4c0 Call Trace: <IRQ> ? isotp_setsockopt+0x390/0x390 __hrtimer_run_queues+0xb8/0x610 hrtimer_run_softirq+0x91/0xd0 ? rcu_read_lock_sched_held+0x4d/0x80 __do_softirq+0xe8/0x553 irq_exit_rcu+0xf8/0x100 sysvec_apic_timer_interrupt+0x9e/0xc0 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 Add result check for wait_event_interruptible() in isotp_sendmsg() to avoid multiple accessers for tx buffer. |
| CVE-2021-47456 | In the Linux kernel, the following vulnerability has been resolved: can: peak_pci: peak_pci_remove(): fix UAF When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250 |
| CVE-2021-47455 | In the Linux kernel, the following vulnerability has been resolved: ptp: Fix possible memory leak in ptp_clock_register() I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88800906c618 (size 8): comm "i2c-idt82p33931", pid 4421, jiffies 4294948083 (age 13.188s) hex dump (first 8 bytes): 70 74 70 30 00 00 00 00 ptp0.... backtrace: [<00000000312ed458>] __kmalloc_track_caller+0x19f/0x3a0 [<0000000079f6e2ff>] kvasprintf+0xb5/0x150 [<0000000026aae54f>] kvasprintf_const+0x60/0x190 [<00000000f323a5f7>] kobject_set_name_vargs+0x56/0x150 [<000000004e35abdd>] dev_set_name+0xc0/0x100 [<00000000f20cfe25>] ptp_clock_register+0x9f4/0xd30 [ptp] [<000000008bb9f0de>] idt82p33_probe.cold+0x8b6/0x1561 [ptp_idt82p33] When posix_clock_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used to give up the device reference, then the name will be freed in kobject_cleanup() and other memory will be freed in ptp_clock_release(). |
| CVE-2021-47454 | In the Linux kernel, the following vulnerability has been resolved: powerpc/smp: do not decrement idle task preempt count in CPU offline With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we get: BUG: scheduling while atomic: swapper/1/0/0x00000000 no locks held by swapper/1/0. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100 Call Trace: dump_stack_lvl+0xac/0x108 __schedule_bug+0xac/0xe0 __schedule+0xcf8/0x10d0 schedule_idle+0x3c/0x70 do_idle+0x2d8/0x4a0 cpu_startup_entry+0x38/0x40 start_secondary+0x2ec/0x3a0 start_secondary_prolog+0x10/0x14 This is because powerpc's arch_cpu_idle_dead() decrements the idle task's preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc: Re-enable preemption before cpu_die()"), specifically "start_secondary() expects a preempt_count() of 0." However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled"), that justification no longer holds. The idle task isn't supposed to re-enable preemption, so remove the vestigial preempt_enable() from the CPU offline path. Tested with pseries and powernv in qemu, and pseries on PowerVM. |
| CVE-2021-47453 | In the Linux kernel, the following vulnerability has been resolved: ice: Avoid crash from unnecessary IDA free In the remove path, there is an attempt to free the aux_idx IDA whether it was allocated or not. This can potentially cause a crash when unloading the driver on systems that do not initialize support for RDMA. But, this free cannot be gated by the status bit for RDMA, since it is allocated if the driver detects support for RDMA at probe time, but the driver can enter into a state where RDMA is not supported after the IDA has been allocated at probe time and this would lead to a memory leak. Initialize aux_idx to an invalid value and check for a valid value when unloading to determine if an IDA free is necessary. |
| CVE-2021-47452 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip netdev events generated on netns removal syzbot reported following (harmless) WARN: WARNING: CPU: 1 PID: 2648 at net/netfilter/core.c:468 nft_netdev_unregister_hooks net/netfilter/nf_tables_api.c:230 [inline] nf_tables_unregister_hook include/net/netfilter/nf_tables.h:1090 [inline] __nft_release_basechain+0x138/0x640 net/netfilter/nf_tables_api.c:9524 nft_netdev_event net/netfilter/nft_chain_filter.c:351 [inline] nf_tables_netdev_event+0x521/0x8a0 net/netfilter/nft_chain_filter.c:382 reproducer: unshare -n bash -c 'ip link add br0 type bridge; nft add table netdev t ; \ nft add chain netdev t ingress \{ type filter hook ingress device "br0" \ priority 0\; policy drop\; \}' Problem is that when netns device exit hooks create the UNREGISTER event, the .pre_exit hook for nf_tables core has already removed the base hook. Notifier attempts to do this again. The need to do base hook unregister unconditionally was needed in the past, because notifier was last stage where reg->dev dereference was safe. Now that nf_tables does the hook removal in .pre_exit, this isn't needed anymore. |
| CVE-2021-47451 | In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_IDLETIMER: fix panic that occurs when timer_type has garbage value Currently, when the rule related to IDLETIMER is added, idletimer_tg timer structure is initialized by kmalloc on executing idletimer_tg_create function. However, in this process timer->timer_type is not defined to a specific value. Thus, timer->timer_type has garbage value and it occurs kernel panic. So, this commit fixes the panic by initializing timer->timer_type using kzalloc instead of kmalloc. Test commands: # iptables -A OUTPUT -j IDLETIMER --timeout 1 --label test $ cat /sys/class/xt_idletimer/timers/test Killed Splat looks like: BUG: KASAN: user-memory-access in alarm_expires_remaining+0x49/0x70 Read of size 8 at addr 0000002e8c7bc4c8 by task cat/917 CPU: 12 PID: 917 Comm: cat Not tainted 5.14.0+ #3 79940a339f71eb14fc81aee1757a20d5bf13eb0e Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: dump_stack_lvl+0x6e/0x9c kasan_report.cold+0x112/0x117 ? alarm_expires_remaining+0x49/0x70 __asan_load8+0x86/0xb0 alarm_expires_remaining+0x49/0x70 idletimer_tg_show+0xe5/0x19b [xt_IDLETIMER 11219304af9316a21bee5ba9d58f76a6b9bccc6d] dev_attr_show+0x3c/0x60 sysfs_kf_seq_show+0x11d/0x1f0 ? device_remove_bin_file+0x20/0x20 kernfs_seq_show+0xa4/0xb0 seq_read_iter+0x29c/0x750 kernfs_fop_read_iter+0x25a/0x2c0 ? __fsnotify_parent+0x3d1/0x570 ? iov_iter_init+0x70/0x90 new_sync_read+0x2a7/0x3d0 ? __x64_sys_llseek+0x230/0x230 ? rw_verify_area+0x81/0x150 vfs_read+0x17b/0x240 ksys_read+0xd9/0x180 ? vfs_write+0x460/0x460 ? do_syscall_64+0x16/0xc0 ? lockdep_hardirqs_on+0x79/0x120 __x64_sys_read+0x43/0x50 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f0cdc819142 Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 RSP: 002b:00007fff28eee5b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f0cdc819142 RDX: 0000000000020000 RSI: 00007f0cdc032000 RDI: 0000000000000003 RBP: 00007f0cdc032000 R08: 00007f0cdc031010 R09: 0000000000000000 R10: 0000000000000022 R11: 0000000000000246 R12: 00005607e9ee31f0 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 |
| CVE-2021-47450 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix host stage-2 PGD refcount The KVM page-table library refcounts the pages of concatenated stage-2 PGDs individually. However, when running KVM in protected mode, the host's stage-2 PGD is currently managed by EL2 as a single high-order compound page, which can cause the refcount of the tail pages to reach 0 when they shouldn't, hence corrupting the page-table. Fix this by introducing a new hyp_split_page() helper in the EL2 page allocator (matching the kernel's split_page() function), and make use of it from host_s2_zalloc_pages_exact(). |
| CVE-2021-47449 | In the Linux kernel, the following vulnerability has been resolved: ice: fix locking for Tx timestamp tracking flush Commit 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") added a lock around the Tx timestamp tracker flow which is used to cleanup any left over SKBs and prepare for device removal. This lock is problematic because it is being held around a call to ice_clear_phy_tstamp. The clear function takes a mutex to send a PHY write command to firmware. This could lead to a deadlock if the mutex actually sleeps, and causes the following warning on a kernel with preemption debugging enabled: [ 715.419426] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:573 [ 715.427900] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 3100, name: rmmod [ 715.435652] INFO: lockdep is turned off. [ 715.439591] Preemption disabled at: [ 715.439594] [<0000000000000000>] 0x0 [ 715.446678] CPU: 52 PID: 3100 Comm: rmmod Tainted: G W OE 5.15.0-rc4+ #42 bdd7ec3018e725f159ca0d372ce8c2c0e784891c [ 715.458058] Hardware name: Intel Corporation S2600STQ/S2600STQ, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ 715.468483] Call Trace: [ 715.470940] dump_stack_lvl+0x6a/0x9a [ 715.474613] ___might_sleep.cold+0x224/0x26a [ 715.478895] __mutex_lock+0xb3/0x1440 [ 715.482569] ? stack_depot_save+0x378/0x500 [ 715.486763] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.494979] ? kfree+0xc1/0x520 [ 715.498128] ? mutex_lock_io_nested+0x12a0/0x12a0 [ 715.502837] ? kasan_set_free_info+0x20/0x30 [ 715.507110] ? __kasan_slab_free+0x10b/0x140 [ 715.511385] ? slab_free_freelist_hook+0xc7/0x220 [ 715.516092] ? kfree+0xc1/0x520 [ 715.519235] ? ice_deinit_lag+0x16c/0x220 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.527359] ? ice_remove+0x1cf/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.535133] ? pci_device_remove+0xab/0x1d0 [ 715.539318] ? __device_release_driver+0x35b/0x690 [ 715.544110] ? driver_detach+0x214/0x2f0 [ 715.548035] ? bus_remove_driver+0x11d/0x2f0 [ 715.552309] ? pci_unregister_driver+0x26/0x250 [ 715.556840] ? ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.564799] ? __do_sys_delete_module.constprop.0+0x2d8/0x4e0 [ 715.570554] ? do_syscall_64+0x3b/0x90 [ 715.574303] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [ 715.579529] ? start_flush_work+0x542/0x8f0 [ 715.583719] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.591923] ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.599960] ? wait_for_completion_io+0x250/0x250 [ 715.604662] ? lock_acquire+0x196/0x200 [ 715.608504] ? do_raw_spin_trylock+0xa5/0x160 [ 715.612864] ice_sbq_rw_reg+0x1e6/0x2f0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.620813] ? ice_reset+0x130/0x130 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.628497] ? __debug_check_no_obj_freed+0x1e8/0x3c0 [ 715.633550] ? trace_hardirqs_on+0x1c/0x130 [ 715.637748] ice_write_phy_reg_e810+0x70/0xf0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.646220] ? do_raw_spin_trylock+0xa5/0x160 [ 715.650581] ? ice_ptp_release+0x910/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.658797] ? ice_ptp_release+0x255/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.667013] ice_clear_phy_tstamp+0x2c/0x110 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.675403] ice_ptp_release+0x408/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.683440] ice_remove+0x560/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.691037] ? _raw_spin_unlock_irqrestore+0x46/0x73 [ 715.696005] pci_device_remove+0xab/0x1d0 [ 715.700018] __device_release_driver+0x35b/0x690 [ 715.704637] driver_detach+0x214/0x2f0 [ 715.708389] bus_remove_driver+0x11d/0x2f0 [ 715.712489] pci_unregister_driver+0x26/0x250 [ 71 ---truncated--- |
| CVE-2021-47448 | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix possible stall on recvmsg() recvmsg() can enter an infinite loop if the caller provides the MSG_WAITALL, the data present in the receive queue is not sufficient to fulfill the request, and no more data is received by the peer. When the above happens, mptcp_wait_data() will always return with no wait, as the MPTCP_DATA_READY flag checked by such function is set and never cleared in such code path. Leveraging the above syzbot was able to trigger an RCU stall: rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1 (t=10500 jiffies g=13089 q=109) rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 schedule+0xd3/0x270 kernel/sched/core.c:6315 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189 Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00 RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283 RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870 RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877 R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000 R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000 FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: instrument_atomic_read_write include/linux/instrumented.h:101 [inline] test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline] mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016 release_sock+0xb4/0x1b0 net/core/sock.c:3204 mptcp_wait_data net/mptcp/protocol.c:1770 [inline] mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080 inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659 sock_recvmsg_nosec net/socket.c:944 [inline] ____sys_recvmsg+0x527/0x600 net/socket.c:2626 ___sys_recvmsg+0x127/0x200 net/socket.c:2670 do_recvmmsg+0x24d/0x6d0 net/socket.c:2764 __sys_recvmmsg net/socket.c:2843 [inline] __do_sys_recvmmsg net/socket.c:2866 [inline] __se_sys_recvmmsg net/socket.c:2859 [inline] __x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc200d2 ---truncated--- |
| CVE-2021-47447 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/a3xx: fix error handling in a3xx_gpu_init() These error paths returned 1 on failure, instead of a negative error code. This would lead to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" did not work because "ret" was set to 1. |
| CVE-2021-47446 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/a4xx: fix error handling in a4xx_gpu_init() This code returns 1 on error instead of a negative error. It leads to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" cannot be true because "ret" is set to 1. |
| CVE-2021-47445 | In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null pointer dereference on pointer edp The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check") |
| CVE-2021-47444 | In the Linux kernel, the following vulnerability has been resolved: drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read In commit e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid corruption test") the function connector_bad_edid() started assuming that the memory for the EDID passed to it was big enough to hold `edid[0x7e] + 1` blocks of data (1 extra for the base block). It completely ignored the fact that the function was passed `num_blocks` which indicated how much memory had been allocated for the EDID. Let's fix this by adding a bounds check. This is important for handling the case where there's an error in the first block of the EDID. In that case we will call connector_bad_edid() without having re-allocated memory based on `edid[0x7e]`. |
| CVE-2021-47443 | In the Linux kernel, the following vulnerability has been resolved: NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() 'params' is allocated in digital_tg_listen_mdaa(), but not free when digital_send_cmd() failed, which will cause memory leak. Fix it by freeing 'params' if digital_send_cmd() return failed. |
| CVE-2021-47442 | In the Linux kernel, the following vulnerability has been resolved: NFC: digital: fix possible memory leak in digital_in_send_sdd_req() 'skb' is allocated in digital_in_send_sdd_req(), but not free when digital_in_send_cmd() failed, which will cause memory leak. Fix it by freeing 'skb' if digital_in_send_cmd() return failed. |
| CVE-2021-47441 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: thermal: Fix out-of-bounds memory accesses Currently, mlxsw allows cooling states to be set above the maximum cooling state supported by the driver: # cat /sys/class/thermal/thermal_zone2/cdev0/type mlxsw_fan # cat /sys/class/thermal/thermal_zone2/cdev0/max_state 10 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state # echo $? 0 This results in out-of-bounds memory accesses when thermal state transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the transition table is accessed with a too large index (state) [1]. According to the thermal maintainer, it is the responsibility of the driver to reject such operations [2]. Therefore, return an error when the state to be set exceeds the maximum cooling state supported by the driver. To avoid dead code, as suggested by the thermal maintainer [3], partially revert commit a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels") that tried to interpret these invalid cooling states (above the maximum) in a special way. The cooling levels array is not removed in order to prevent the fans going below 20% PWM, which would cause them to get stuck at 0% PWM. [1] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290 Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122 Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016 Workqueue: events_freezable_power_ thermal_zone_device_check Call Trace: dump_stack_lvl+0x8b/0xb3 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b thermal_cooling_device_stats_update+0x271/0x290 __thermal_cdev_update+0x15e/0x4e0 thermal_cdev_update+0x9f/0xe0 step_wise_throttle+0x770/0xee0 thermal_zone_device_update+0x3f6/0xdf0 process_one_work+0xa42/0x1770 worker_thread+0x62f/0x13e0 kthread+0x3ee/0x4e0 ret_from_fork+0x1f/0x30 Allocated by task 1: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 thermal_cooling_device_setup_sysfs+0x153/0x2c0 __thermal_cooling_device_register.part.0+0x25b/0x9c0 thermal_cooling_device_register+0xb3/0x100 mlxsw_thermal_init+0x5c5/0x7e0 __mlxsw_core_bus_device_register+0xcb3/0x19c0 mlxsw_core_bus_device_register+0x56/0xb0 mlxsw_pci_probe+0x54f/0x710 local_pci_probe+0xc6/0x170 pci_device_probe+0x2b2/0x4d0 really_probe+0x293/0xd10 __driver_probe_device+0x2af/0x440 driver_probe_device+0x51/0x1e0 __driver_attach+0x21b/0x530 bus_for_each_dev+0x14c/0x1d0 bus_add_driver+0x3ac/0x650 driver_register+0x241/0x3d0 mlxsw_sp_module_init+0xa2/0x174 do_one_initcall+0xee/0x5f0 kernel_init_freeable+0x45a/0x4de kernel_init+0x1f/0x210 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff8881052f7800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 1016 bytes inside of 1024-byte region [ffff8881052f7800, ffff8881052f7c00) The buggy address belongs to the page: page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0 head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x200000000010200(slab|head|node=0|zone=2) raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67- ---truncated--- |
| CVE-2021-47440 | In the Linux kernel, the following vulnerability has been resolved: net: encx24j600: check error in devm_regmap_init_encx24j600 devm_regmap_init may return error which caused by like out of memory, this will results in null pointer dereference later when reading or writing register: general protection fault in encx24j600_spi_probe KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty #11 9c53a778c1306b1b02359f3c2bbedc0222cba652 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540 Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00 RSP: 0018:ffffc900010476b8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000 RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094 RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001 R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08 FS: 00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459 spi_probe drivers/spi/spi.c:397 really_probe drivers/base/dd.c:517 __driver_probe_device drivers/base/dd.c:751 driver_probe_device drivers/base/dd.c:782 __device_attach_driver drivers/base/dd.c:899 bus_for_each_drv drivers/base/bus.c:427 __device_attach drivers/base/dd.c:971 bus_probe_device drivers/base/bus.c:487 device_add drivers/base/core.c:3364 __spi_add_device drivers/spi/spi.c:599 spi_add_device drivers/spi/spi.c:641 spi_new_device drivers/spi/spi.c:717 new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e] dev_attr_store drivers/base/core.c:2074 sysfs_kf_write fs/sysfs/file.c:139 kernfs_fop_write_iter fs/kernfs/file.c:300 new_sync_write fs/read_write.c:508 (discriminator 4) vfs_write fs/read_write.c:594 ksys_write fs/read_write.c:648 do_syscall_64 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113 Add error check in devm_regmap_init_encx24j600 to avoid this situation. |
| CVE-2021-47439 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: microchip: Added the condition for scheduling ksz_mib_read_work When the ksz module is installed and removed using rmmod, kernel crashes with null pointer dereferrence error. During rmmod, ksz_switch_remove function tries to cancel the mib_read_workqueue using cancel_delayed_work_sync routine and unregister switch from dsa. During dsa_unregister_switch it calls ksz_mac_link_down, which in turn reschedules the workqueue since mib_interval is non-zero. Due to which queue executed after mib_interval and it tries to access dp->slave. But the slave is unregistered in the ksz_switch_remove function. Hence kernel crashes. To avoid this crash, before canceling the workqueue, resetted the mib_interval to 0. v1 -> v2: -Removed the if condition in ksz_mib_read_work |
| CVE-2021-47438 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path Prior to this patch in case mlx5_core_destroy_cq() failed it returns without completing all destroy operations and that leads to memory leak. Instead, complete the destroy flow before return error. Also move mlx5_debug_cq_remove() to the beginning of mlx5_core_destroy_cq() to be symmetrical with mlx5_core_create_cq(). kmemleak complains on: unreferenced object 0xc000000038625100 (size 64): comm "ethtool", pid 28301, jiffies 4298062946 (age 785.380s) hex dump (first 32 bytes): 60 01 48 94 00 00 00 c0 b8 05 34 c3 00 00 00 c0 `.H.......4..... 02 00 00 00 00 00 00 00 00 db 7d c1 00 00 00 c0 ..........}..... backtrace: [<000000009e8643cb>] add_res_tree+0xd0/0x270 [mlx5_core] [<00000000e7cb8e6c>] mlx5_debug_cq_add+0x5c/0xc0 [mlx5_core] [<000000002a12918f>] mlx5_core_create_cq+0x1d0/0x2d0 [mlx5_core] [<00000000cef0a696>] mlx5e_create_cq+0x210/0x3f0 [mlx5_core] [<000000009c642c26>] mlx5e_open_cq+0xb4/0x130 [mlx5_core] [<0000000058dfa578>] mlx5e_ptp_open+0x7f4/0xe10 [mlx5_core] [<0000000081839561>] mlx5e_open_channels+0x9cc/0x13e0 [mlx5_core] [<0000000009cf05d4>] mlx5e_switch_priv_channels+0xa4/0x230 [mlx5_core] [<0000000042bbedd8>] mlx5e_safe_switch_params+0x14c/0x300 [mlx5_core] [<0000000004bc9db8>] set_pflag_tx_port_ts+0x9c/0x160 [mlx5_core] [<00000000a0553443>] mlx5e_set_priv_flags+0xd0/0x1b0 [mlx5_core] [<00000000a8f3d84b>] ethnl_set_privflags+0x234/0x2d0 [<00000000fd27f27c>] genl_family_rcv_msg_doit+0x108/0x1d0 [<00000000f495e2bb>] genl_family_rcv_msg+0xe4/0x1f0 [<00000000646c5c2c>] genl_rcv_msg+0x78/0x120 [<00000000d53e384e>] netlink_rcv_skb+0x74/0x1a0 |
| CVE-2021-47437 | In the Linux kernel, the following vulnerability has been resolved: iio: adis16475: fix deadlock on frequency set With commit 39c024b51b560 ("iio: adis16475: improve sync scale mode handling"), two deadlocks were introduced: 1) The call to 'adis_write_reg_16()' was not changed to it's unlocked version. 2) The lock was not being released on the success path of the function. This change fixes both these issues. |
| CVE-2021-47436 | In the Linux kernel, the following vulnerability has been resolved: usb: musb: dsps: Fix the probe error path Commit 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb") has inverted the calls to dsps_setup_optional_vbus_irq() and dsps_create_musb_pdev() without updating correctly the error path. dsps_create_musb_pdev() allocates and registers a new platform device which must be unregistered and freed with platform_device_unregister(), and this is missing upon dsps_setup_optional_vbus_irq() error. While on the master branch it seems not to trigger any issue, I observed a kernel crash because of a NULL pointer dereference with a v5.10.70 stable kernel where the patch mentioned above was backported. With this kernel version, -EPROBE_DEFER is returned the first time dsps_setup_optional_vbus_irq() is called which triggers the probe to error out without unregistering the platform device. Unfortunately, on the Beagle Bone Black Wireless, the platform device still living in the system is being used by the USB Ethernet gadget driver, which during the boot phase triggers the crash. My limited knowledge of the musb world prevents me to revert this commit which was sent to silence a robot warning which, as far as I understand, does not make sense. The goal of this patch was to prevent an IRQ to fire before the platform device being registered. I think this cannot ever happen due to the fact that enabling the interrupts is done by the ->enable() callback of the platform musb device, and this platform device must be already registered in order for the core or any other user to use this callback. Hence, I decided to fix the error path, which might prevent future errors on mainline kernels while also fixing older ones. |
| CVE-2021-47435 | In the Linux kernel, the following vulnerability has been resolved: dm: fix mempool NULL pointer race when completing IO dm_io_dec_pending() calls end_io_acct() first and will then dec md in-flight pending count. But if a task is swapping DM table at same time this can result in a crash due to mempool->elements being NULL: task1 task2 do_resume ->do_suspend ->dm_wait_for_completion bio_endio ->clone_endio ->dm_io_dec_pending ->end_io_acct ->wakeup task1 ->dm_swap_table ->__bind ->__bind_mempools ->bioset_exit ->mempool_exit ->free_io [ 67.330330] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ...... [ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 67.330510] pc : mempool_free+0x70/0xa0 [ 67.330515] lr : mempool_free+0x4c/0xa0 [ 67.330520] sp : ffffff8008013b20 [ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004 [ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8 [ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800 [ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800 [ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80 [ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c [ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd [ 67.330563] x15: 000000000093b41e x14: 0000000000000010 [ 67.330569] x13: 0000000000007f7a x12: 0000000034155555 [ 67.330574] x11: 0000000000000001 x10: 0000000000000001 [ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000 [ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a [ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001 [ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8 [ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970 [ 67.330609] Call trace: [ 67.330616] mempool_free+0x70/0xa0 [ 67.330627] bio_put+0xf8/0x110 [ 67.330638] dec_pending+0x13c/0x230 [ 67.330644] clone_endio+0x90/0x180 [ 67.330649] bio_endio+0x198/0x1b8 [ 67.330655] dec_pending+0x190/0x230 [ 67.330660] clone_endio+0x90/0x180 [ 67.330665] bio_endio+0x198/0x1b8 [ 67.330673] blk_update_request+0x214/0x428 [ 67.330683] scsi_end_request+0x2c/0x300 [ 67.330688] scsi_io_completion+0xa0/0x710 [ 67.330695] scsi_finish_command+0xd8/0x110 [ 67.330700] scsi_softirq_done+0x114/0x148 [ 67.330708] blk_done_softirq+0x74/0xd0 [ 67.330716] __do_softirq+0x18c/0x374 [ 67.330724] irq_exit+0xb4/0xb8 [ 67.330732] __handle_domain_irq+0x84/0xc0 [ 67.330737] gic_handle_irq+0x148/0x1b0 [ 67.330744] el1_irq+0xe8/0x190 [ 67.330753] lpm_cpuidle_enter+0x4f8/0x538 [ 67.330759] cpuidle_enter_state+0x1fc/0x398 [ 67.330764] cpuidle_enter+0x18/0x20 [ 67.330772] do_idle+0x1b4/0x290 [ 67.330778] cpu_startup_entry+0x20/0x28 [ 67.330786] secondary_start_kernel+0x160/0x170 Fix this by: 1) Establishing pointers to 'struct dm_io' members in dm_io_dec_pending() so that they may be passed into end_io_acct() _after_ free_io() is called. 2) Moving end_io_acct() after free_io(). |
| CVE-2021-47434 | In the Linux kernel, the following vulnerability has been resolved: xhci: Fix command ring pointer corruption while aborting a command The command ring pointer is located at [6:63] bits of the command ring control register (CRCR). All the control bits like command stop, abort are located at [0:3] bits. While aborting a command, we read the CRCR and set the abort bit and write to the CRCR. The read will always give command ring pointer as all zeros. So we essentially write only the control bits. Since we split the 64 bit write into two 32 bit writes, there is a possibility of xHC command ring stopped before the upper dword (all zeros) is written. If that happens, xHC updates the upper dword of its internal command ring pointer with all zeros. Next time, when the command ring is restarted, we see xHC memory access failures. Fix this issue by only writing to the lower dword of CRCR where all control bits are located. |
| CVE-2021-47433 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix abort logic in btrfs_replace_file_extents Error injection testing uncovered a case where we'd end up with a corrupt file system with a missing extent in the middle of a file. This occurs because the if statement to decide if we should abort is wrong. The only way we would abort in this case is if we got a ret != -EOPNOTSUPP and we called from the file clone code. However the prealloc code uses this path too. Instead we need to abort if there is an error, and the only error we _don't_ abort on is -EOPNOTSUPP and only if we came from the clone file code. |
| CVE-2021-47432 | In the Linux kernel, the following vulnerability has been resolved: lib/generic-radix-tree.c: Don't overflow in peek() When we started spreading new inode numbers throughout most of the 64 bit inode space, that triggered some corner case bugs, in particular some integer overflows related to the radix tree code. Oops. |
| CVE-2021-47431 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix gart.bo pin_count leak gmc_v{9,10}_0_gart_disable() isn't called matched with correspoding gart_enbale function in SRIOV case. This will lead to gart.bo pin_count leak on driver unload. |
| CVE-2021-47430 | In the Linux kernel, the following vulnerability has been resolved: x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n Commit 3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks") added a warning if AC is set when in the kernel. Commit 662a0221893a3d ("x86/entry: Fix AC assertion") changed the warning to only fire if the CPU supports SMAP. However, the warning can still trigger on a machine that supports SMAP but where it's disabled in the kernel config and when running the syscall_nt selftest, for example: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 49 at irqentry_enter_from_user_mode CPU: 0 PID: 49 Comm: init Tainted: G T 5.15.0-rc4+ #98 e6202628ee053b4f310759978284bd8bb0ce6905 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:irqentry_enter_from_user_mode ... Call Trace: ? irqentry_enter ? exc_general_protection ? asm_exc_general_protection ? asm_exc_general_protectio IS_ENABLED(CONFIG_X86_SMAP) could be added to the warning condition, but even this would not be enough in case SMAP is disabled at boot time with the "nosmap" parameter. To be consistent with "nosmap" behaviour, clear X86_FEATURE_SMAP when !CONFIG_X86_SMAP. Found using entry-fuzz + satrandconfig. [ bp: Massage commit message. ] |
| CVE-2021-47429 | In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix unrecoverable MCE calling async handler from NMI The machine check handler is not considered NMI on 64s. The early handler is the true NMI handler, and then it schedules the machine_check_exception handler to run when interrupts are enabled. This works fine except the case of an unrecoverable MCE, where the true NMI is taken when MSR[RI] is clear, it can not recover, so it calls machine_check_exception directly so something might be done about it. Calling an async handler from NMI context can result in irq state and other things getting corrupted. This can also trigger the BUG at arch/powerpc/include/asm/interrupt.h:168 BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE)); Fix this by making an _async version of the handler which is called in the normal case, and a NMI version that is called for unrecoverable interrupts. |
| CVE-2021-47428 | In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: fix program check interrupt emergency stack path Emergency stack path was jumping into a 3: label inside the __GEN_COMMON_BODY macro for the normal path after it had finished, rather than jumping over it. By a small miracle this is the correct place to build up a new interrupt frame with the existing stack pointer, so things basically worked okay with an added weird looking 700 trap frame on top (which had the wrong ->nip so it didn't decode bug messages either). Fix this by avoiding using numeric labels when jumping over non-trivial macros. Before: LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 88 Comm: sh Not tainted 5.15.0-rc2-00034-ge057cdade6e5 #2637 NIP: 7265677368657265 LR: c00000000006c0c8 CTR: c0000000000097f0 REGS: c0000000fffb3a50 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 00000700 XER: 20040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006c964 c0000000fffb3cf0 c000000001513800 0000000000000000 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80 NIP [7265677368657265] 0x7265677368657265 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10 Call Trace: [c0000000fffb3cf0] [c00000000000bdac] soft_nmi_common+0x13c/0x1d0 (unreliable) --- interrupt: 700 at decrementer_common_virt+0xb8/0x230 NIP: c0000000000098b8 LR: c00000000006c0c8 CTR: c0000000000097f0 REGS: c0000000fffb3d60 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 22424282 XER: 20040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006c964 0000000000002400 c000000001513800 0000000000000000 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80 NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10 --- interrupt: 700 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 6d28218e0cc3c949 ]--- After: ------------[ cut here ]------------ kernel BUG at arch/powerpc/kernel/exceptions-64s.S:491! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 88 Comm: login Not tainted 5.15.0-rc2-00034-ge057cdade6e5-dirty #2638 NIP: c0000000000098b8 LR: c00000000006bf04 CTR: c0000000000097f0 REGS: c0000000fffb3d60 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 24482227 XER: 00040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006bf04 0000000000002400 c000000001513800 c000000001271868 GPR04: 00000000100f0d29 0000000042000000 0000000000000007 0000000000000009 GPR08: 00000000100f0d29 0000000024482227 0000000000002710 c000000000181b3c GPR12: 9000000000009033 c0000000016b0000 00000000100f0d29 c000000005b22f00 GPR16: 00000000ffff0000 0000000000000001 0000000000000009 00000000100eed90 GPR20: 00000000100eed90 00000 ---truncated--- |
| CVE-2021-47427 | In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi: Fix iscsi_task use after free Commit d39df158518c ("scsi: iscsi: Have abort handler get ref to conn") added iscsi_get_conn()/iscsi_put_conn() calls during abort handling but then also changed the handling of the case where we detect an already completed task where we now end up doing a goto to the common put/cleanup code. This results in a iscsi_task use after free, because the common cleanup code will do a put on the iscsi_task. This reverts the goto and moves the iscsi_get_conn() to after we've checked if the iscsi_task is valid. |
| CVE-2021-47426 | In the Linux kernel, the following vulnerability has been resolved: bpf, s390: Fix potential memory leak about jit_data Make sure to free jit_data through kfree() in the error path. |
| CVE-2021-47425 | In the Linux kernel, the following vulnerability has been resolved: i2c: acpi: fix resource leak in reconfiguration device addition acpi_i2c_find_adapter_by_handle() calls bus_find_device() which takes a reference on the adapter which is never released which will result in a reference count leak and render the adapter unremovable. Make sure to put the adapter after creating the client in the same manner that we do for OF. [wsa: fixed title] |
| CVE-2021-47424 | In the Linux kernel, the following vulnerability has been resolved: i40e: Fix freeing of uninitialized misc IRQ vector When VSI set up failed in i40e_probe() as part of PF switch set up driver was trying to free misc IRQ vectors in i40e_clear_interrupt_scheme and produced a kernel Oops: Trying to free already-free IRQ 266 WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300 Workqueue: events work_for_cpu_fn RIP: 0010:__free_irq+0x9a/0x300 Call Trace: ? synchronize_irq+0x3a/0xa0 free_irq+0x2e/0x60 i40e_clear_interrupt_scheme+0x53/0x190 [i40e] i40e_probe.part.108+0x134b/0x1a40 [i40e] ? kmem_cache_alloc+0x158/0x1c0 ? acpi_ut_update_ref_count.part.1+0x8e/0x345 ? acpi_ut_update_object_reference+0x15e/0x1e2 ? strstr+0x21/0x70 ? irq_get_irq_data+0xa/0x20 ? mp_check_pin_attr+0x13/0xc0 ? irq_get_irq_data+0xa/0x20 ? mp_map_pin_to_irq+0xd3/0x2f0 ? acpi_register_gsi_ioapic+0x93/0x170 ? pci_conf1_read+0xa4/0x100 ? pci_bus_read_config_word+0x49/0x70 ? do_pci_enable_device+0xcc/0x100 local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The problem is that at that point misc IRQ vectors were not allocated yet and we get a call trace that driver is trying to free already free IRQ vectors. Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED PF state before calling i40e_free_misc_vector. This state is set only if misc IRQ vectors were properly initialized. |
| CVE-2021-47423 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/debugfs: fix file release memory leak When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked. |
| CVE-2021-47422 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/kms/nv50-: fix file release memory leak When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked. |
| CVE-2021-47421 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume In current code, when a PCI error state pci_channel_io_normal is detectd, it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI driver will continue the execution of PCI resume callback report_resume by pci_walk_bridge, and the callback will go into amdgpu_pci_resume finally, where write lock is releasd unconditionally without acquiring such lock first. In this case, a deadlock will happen when other threads start to acquire the read lock. To fix this, add a member in amdgpu_device strucutre to cache pci_channel_state, and only continue the execution in amdgpu_pci_resume when it's pci_channel_io_frozen. |
| CVE-2021-47420 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix a potential ttm->sg memory leak Memory is allocated for ttm->sg by kmalloc in kfd_mem_dmamap_userptr, but isn't freed by kfree in kfd_mem_dmaunmap_userptr. Free it! |
| CVE-2021-47419 | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_taprio: properly cancel timer from taprio_destroy() There is a comment in qdisc_create() about us not calling ops->reset() in some cases. err_out4: /* * Any broken qdiscs that would require a ops->reset() here? * The qdisc was never in action so it shouldn't be necessary. */ As taprio sets a timer before actually receiving a packet, we need to cancel it from ops->destroy, just in case ops->reset has not been called. syzbot reported: ODEBUG: free active (active state 0) object type: hrtimer hint: advance_sched+0x0/0x9a0 arch/x86/include/asm/atomic64_64.h:22 WARNING: CPU: 0 PID: 8441 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 0 PID: 8441 Comm: syz-executor813 Not tainted 5.14.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd e0 d3 e3 89 4c 89 ee 48 c7 c7 e0 c7 e3 89 e8 5b 86 11 05 <0f> 0b 83 05 85 03 92 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffc9000130f330 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff88802baeb880 RSI: ffffffff815d87b5 RDI: fffff52000261e58 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815d25ee R11: 0000000000000000 R12: ffffffff898dd020 R13: ffffffff89e3ce20 R14: ffffffff81653630 R15: dffffc0000000000 FS: 0000000000f0d300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffb64b3e000 CR3: 0000000036557000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __debug_check_no_obj_freed lib/debugobjects.c:987 [inline] debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1018 slab_free_hook mm/slub.c:1603 [inline] slab_free_freelist_hook+0x171/0x240 mm/slub.c:1653 slab_free mm/slub.c:3213 [inline] kfree+0xe4/0x540 mm/slub.c:4267 qdisc_create+0xbcf/0x1320 net/sched/sch_api.c:1299 tc_modify_qdisc+0x4c8/0x1a60 net/sched/sch_api.c:1663 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2403 ___sys_sendmsg+0xf3/0x170 net/socket.c:2457 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 |
| CVE-2021-47418 | In the Linux kernel, the following vulnerability has been resolved: net_sched: fix NULL deref in fifo_set_limit() syzbot reported another NULL deref in fifo_set_limit() [1] I could repro the issue with : unshare -n tc qd add dev lo root handle 1:0 tbf limit 200000 burst 70000 rate 100Mbit tc qd replace dev lo parent 1:0 pfifo_fast tc qd change dev lo root handle 1:0 tbf limit 300000 burst 70000 rate 100Mbit pfifo_fast does not have a change() operation. Make fifo_set_limit() more robust about this. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 1cf99067 P4D 1cf99067 PUD 7ca49067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 1 PID: 14443 Comm: syz-executor959 Not tainted 5.15.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffffc9000e2f7310 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffffff8d6ecc00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888024c27910 RDI: ffff888071e34000 RBP: ffff888071e34000 R08: 0000000000000001 R09: ffffffff8fcfb947 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888024c27910 R13: ffff888071e34018 R14: 0000000000000000 R15: ffff88801ef74800 FS: 00007f321d897700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000722c3000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: fifo_set_limit net/sched/sch_fifo.c:242 [inline] fifo_set_limit+0x198/0x210 net/sched/sch_fifo.c:227 tbf_change+0x6ec/0x16d0 net/sched/sch_tbf.c:418 qdisc_change net/sched/sch_api.c:1332 [inline] tc_modify_qdisc+0xd9a/0x1a60 net/sched/sch_api.c:1634 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47417 | In the Linux kernel, the following vulnerability has been resolved: libbpf: Fix memory leak in strset Free struct strset itself, not just its internal parts. |
| CVE-2021-47416 | In the Linux kernel, the following vulnerability has been resolved: phy: mdio: fix memory leak Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure. |
| CVE-2021-47415 | In the Linux kernel, the following vulnerability has been resolved: iwlwifi: mvm: Fix possible NULL dereference In __iwl_mvm_remove_time_event() check that 'te_data->vif' is NULL before dereferencing it. |
| CVE-2021-47414 | In the Linux kernel, the following vulnerability has been resolved: riscv: Flush current cpu icache before other cpus On SiFive Unmatched, I recently fell onto the following BUG when booting: [ 0.000000] ftrace: allocating 36610 entries in 144 pages [ 0.000000] Oops - illegal instruction [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.13.1+ #5 [ 0.000000] Hardware name: SiFive HiFive Unmatched A00 (DT) [ 0.000000] epc : riscv_cpuid_to_hartid_mask+0x6/0xae [ 0.000000] ra : __sbi_rfence_v02+0xc8/0x10a [ 0.000000] epc : ffffffff80007240 ra : ffffffff80009964 sp : ffffffff81803e10 [ 0.000000] gp : ffffffff81a1ea70 tp : ffffffff8180f500 t0 : ffffffe07fe30000 [ 0.000000] t1 : 0000000000000004 t2 : 0000000000000000 s0 : ffffffff81803e60 [ 0.000000] s1 : 0000000000000000 a0 : ffffffff81a22238 a1 : ffffffff81803e10 [ 0.000000] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.000000] a5 : 0000000000000000 a6 : ffffffff8000989c a7 : 0000000052464e43 [ 0.000000] s2 : ffffffff81a220c8 s3 : 0000000000000000 s4 : 0000000000000000 [ 0.000000] s5 : 0000000000000000 s6 : 0000000200000100 s7 : 0000000000000001 [ 0.000000] s8 : ffffffe07fe04040 s9 : ffffffff81a22c80 s10: 0000000000001000 [ 0.000000] s11: 0000000000000004 t3 : 0000000000000001 t4 : 0000000000000008 [ 0.000000] t5 : ffffffcf04000808 t6 : ffffffe3ffddf188 [ 0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000002 [ 0.000000] [<ffffffff80007240>] riscv_cpuid_to_hartid_mask+0x6/0xae [ 0.000000] [<ffffffff80009474>] sbi_remote_fence_i+0x1e/0x26 [ 0.000000] [<ffffffff8000b8f4>] flush_icache_all+0x12/0x1a [ 0.000000] [<ffffffff8000666c>] patch_text_nosync+0x26/0x32 [ 0.000000] [<ffffffff8000884e>] ftrace_init_nop+0x52/0x8c [ 0.000000] [<ffffffff800f051e>] ftrace_process_locs.isra.0+0x29c/0x360 [ 0.000000] [<ffffffff80a0e3c6>] ftrace_init+0x80/0x130 [ 0.000000] [<ffffffff80a00f8c>] start_kernel+0x5c4/0x8f6 [ 0.000000] ---[ end trace f67eb9af4d8d492b ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- While ftrace is looping over a list of addresses to patch, it always failed when patching the same function: riscv_cpuid_to_hartid_mask. Looking at the backtrace, the illegal instruction is encountered in this same function. However, patch_text_nosync, after patching the instructions, calls flush_icache_range. But looking at what happens in this function: flush_icache_range -> flush_icache_all -> sbi_remote_fence_i -> __sbi_rfence_v02 -> riscv_cpuid_to_hartid_mask The icache and dcache of the current cpu are never synchronized between the patching of riscv_cpuid_to_hartid_mask and calling this same function. So fix this by flushing the current cpu's icache before asking for the other cpus to do the same. |
| CVE-2021-47413 | In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle When passing 'phys' in the devicetree to describe the USB PHY phandle (which is the recommended way according to Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the following NULL pointer dereference is observed on i.MX7 and i.MX8MM: [ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 1.498170] Mem abort info: [ 1.500966] ESR = 0x96000044 [ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.509356] SET = 0, FnV = 0 [ 1.512416] EA = 0, S1PTW = 0 [ 1.515569] FSC = 0x04: level 0 translation fault [ 1.520458] Data abort info: [ 1.523349] ISV = 0, ISS = 0x00000044 [ 1.527196] CM = 0, WnR = 1 [ 1.530176] [0000000000000098] user address but active_mm is swapper [ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 1.542125] Modules linked in: [ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3 [ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT) [ 1.557133] Workqueue: events_unbound deferred_probe_work_func [ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) [ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510 [ 1.573973] lr : imx7d_charger_detection+0x22c/0x510 This happens because the charger functions check for the phy presence inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc' (ci->usb_phy) instead. This causes the NULL pointer dereference inside imx7d_charger_detection(). Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found. Tested on a imx7s-warp board. |
| CVE-2021-47412 | In the Linux kernel, the following vulnerability has been resolved: block: don't call rq_qos_ops->done_bio if the bio isn't tracked rq_qos framework is only applied on request based driver, so: 1) rq_qos_done_bio() needn't to be called for bio based driver 2) rq_qos_done_bio() needn't to be called for bio which isn't tracked, such as bios ended from error handling code. Especially in bio_endio(): 1) request queue is referred via bio->bi_bdev->bd_disk->queue, which may be gone since request queue refcount may not be held in above two cases 2) q->rq_qos may be freed in blk_cleanup_queue() when calling into __rq_qos_done_bio() Fix the potential kernel panic by not calling rq_qos_ops->done_bio if the bio isn't tracked. This way is safe because both ioc_rqos_done_bio() and blkcg_iolatency_done_bio() are nop if the bio isn't tracked. |
| CVE-2021-47410 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix svm_migrate_fini warning Device manager releases device-specific resources when a driver disconnects from a device, devm_memunmap_pages and devm_release_mem_region calls in svm_migrate_fini are redundant. It causes below warning trace after patch "drm/amdgpu: Split amdgpu_device_fini into early and late", so remove function svm_migrate_fini. BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718 WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795 devm_release_action+0x51/0x60 Call Trace: ? memunmap_pages+0x360/0x360 svm_migrate_fini+0x2d/0x60 [amdgpu] kgd2kfd_device_exit+0x23/0xa0 [amdgpu] amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu] amdgpu_device_fini_sw+0x45/0x290 [amdgpu] amdgpu_driver_release_kms+0x12/0x30 [amdgpu] drm_dev_release+0x20/0x40 [drm] release_nodes+0x196/0x1e0 device_release_driver_internal+0x104/0x1d0 driver_detach+0x47/0x90 bus_remove_driver+0x7a/0xd0 pci_unregister_driver+0x3d/0x90 amdgpu_exit+0x11/0x20 [amdgpu] |
| CVE-2021-47409 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. |
| CVE-2021-47408 | In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: serialize hash resizes and cleanups Syzbot was able to trigger the following warning [1] No repro found by syzbot yet but I was able to trigger similar issue by having 2 scripts running in parallel, changing conntrack hash sizes, and: for j in `seq 1 1000` ; do unshare -n /bin/true >/dev/null ; done It would take more than 5 minutes for net_namespace structures to be cleaned up. This is because nf_ct_iterate_cleanup() has to restart everytime a resize happened. By adding a mutex, we can serialize hash resizes and cleanups and also make get_next_corpse() faster by skipping over empty buckets. Even without resizes in the picture, this patch considerably speeds up network namespace dismantles. [1] INFO: task syz-executor.0:8312 can't die for more than 144 seconds. task:syz-executor.0 state:R running task stack:25672 pid: 8312 ppid: 6573 flags:0x00004006 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 preempt_schedule_common+0x45/0xc0 kernel/sched/core.c:6408 preempt_schedule_thunk+0x16/0x18 arch/x86/entry/thunk_64.S:35 __local_bh_enable_ip+0x109/0x120 kernel/softirq.c:390 local_bh_enable include/linux/bottom_half.h:32 [inline] get_next_corpse net/netfilter/nf_conntrack_core.c:2252 [inline] nf_ct_iterate_cleanup+0x15a/0x450 net/netfilter/nf_conntrack_core.c:2275 nf_conntrack_cleanup_net_list+0x14c/0x4f0 net/netfilter/nf_conntrack_core.c:2469 ops_exit_list+0x10d/0x160 net/core/net_namespace.c:171 setup_net+0x639/0xa30 net/core/net_namespace.c:349 copy_net_ns+0x319/0x760 net/core/net_namespace.c:470 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3128 __do_sys_unshare kernel/fork.c:3202 [inline] __se_sys_unshare kernel/fork.c:3200 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3200 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f63da68e739 RSP: 002b:00007f63d7c05188 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f63da792f80 RCX: 00007f63da68e739 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000000 RBP: 00007f63da6e8cc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f63da792f80 R13: 00007fff50b75d3f R14: 00007f63d7c05300 R15: 0000000000022000 Showing all locks held in the system: 1 lock held by khungtaskd/27: #0: ffffffff8b980020 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6446 2 locks held by kworker/u4:2/153: #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic_long_set include/linux/atomic/atomic-long.h:41 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: atomic_long_set include/linux/atomic/atomic-instrumented.h:1198 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:634 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:661 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x896/0x1690 kernel/workqueue.c:2268 #1: ffffc9000140fdb0 ((kfence_timer).work){+.+.}-{0:0}, at: process_one_work+0x8ca/0x1690 kernel/workqueue.c:2272 1 lock held by systemd-udevd/2970: 1 lock held by in:imklog/6258: #0: ffff88807f970ff0 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:990 3 locks held by kworker/1:6/8158: 1 lock held by syz-executor.0/8312: 2 locks held by kworker/u4:13/9320: 1 lock held by ---truncated--- |
| CVE-2021-47407 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Handle SRCU initialization failure during page track init Check the return of init_srcu_struct(), which can fail due to OOM, when initializing the page track mechanism. Lack of checking leads to a NULL pointer deref found by a modified syzkaller. [Move the call towards the beginning of kvm_arch_init_vm. - Paolo] |
| CVE-2021-47406 | In the Linux kernel, the following vulnerability has been resolved: ext4: add error checking to ext4_ext_replay_set_iblocks() If the call to ext4_map_blocks() fails due to an corrupted file system, ext4_ext_replay_set_iblocks() can get stuck in an infinite loop. This could be reproduced by running generic/526 with a file system that has inline_data and fast_commit enabled. The system will repeatedly log to the console: EXT4-fs warning (device dm-3): ext4_block_to_path:105: block 1074800922 > max in inode 131076 and the stack that it gets stuck in is: ext4_block_to_path+0xe3/0x130 ext4_ind_map_blocks+0x93/0x690 ext4_map_blocks+0x100/0x660 skip_hole+0x47/0x70 ext4_ext_replay_set_iblocks+0x223/0x440 ext4_fc_replay_inode+0x29e/0x3b0 ext4_fc_replay+0x278/0x550 do_one_pass+0x646/0xc10 jbd2_journal_recover+0x14a/0x270 jbd2_journal_load+0xc4/0x150 ext4_load_journal+0x1f3/0x490 ext4_fill_super+0x22d4/0x2c00 With this patch, generic/526 still fails, but system is no longer locking up in a tight loop. It's likely the root casue is that fast_commit replay is corrupting file systems with inline_data, and we probably need to add better error handling in the fast commit replay code path beyond what is done here, which essentially just breaks the infinite loop without reporting the to the higher levels of the code. |
| CVE-2021-47405 | In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: free raw_report buffers in usbhid_stop Free the unsent raw_report buffers when the device is removed. Fixes a memory leak reported by syzbot at: https://syzkaller.appspot.com/bug?id=7b4fa7cb1a7c2d3342a2a8a6c53371c8c418ab47 |
| CVE-2021-47404 | In the Linux kernel, the following vulnerability has been resolved: HID: betop: fix slab-out-of-bounds Write in betop_probe Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver. The problem is the driver assumes the device must have an input report but some malicious devices violate this assumption. So this patch checks hid_device's input is non empty before it's been used. |
| CVE-2021-47403 | In the Linux kernel, the following vulnerability has been resolved: ipack: ipoctal: fix module reference leak A reference to the carrier module was taken on every open but was only released once when the final reference to the tty struct was dropped. Fix this by taking the module reference and initialising the tty driver data when installing the tty. |
| CVE-2021-47402 | In the Linux kernel, the following vulnerability has been resolved: net: sched: flower: protect fl_walk() with rcu Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul() also removed rcu protection of individual filters which causes following use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain rcu read lock while iterating and taking the filter reference and temporary release the lock while calling arg->fn() callback that can sleep. KASAN trace: [ 352.773640] ================================================================== [ 352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower] [ 352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987 [ 352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2 [ 352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 352.781022] Call Trace: [ 352.781573] dump_stack_lvl+0x46/0x5a [ 352.782332] print_address_description.constprop.0+0x1f/0x140 [ 352.783400] ? fl_walk+0x159/0x240 [cls_flower] [ 352.784292] ? fl_walk+0x159/0x240 [cls_flower] [ 352.785138] kasan_report.cold+0x83/0xdf [ 352.785851] ? fl_walk+0x159/0x240 [cls_flower] [ 352.786587] kasan_check_range+0x145/0x1a0 [ 352.787337] fl_walk+0x159/0x240 [cls_flower] [ 352.788163] ? fl_put+0x10/0x10 [cls_flower] [ 352.789007] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.790102] tcf_chain_dump+0x231/0x450 [ 352.790878] ? tcf_chain_tp_delete_empty+0x170/0x170 [ 352.791833] ? __might_sleep+0x2e/0xc0 [ 352.792594] ? tfilter_notify+0x170/0x170 [ 352.793400] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.794477] tc_dump_tfilter+0x385/0x4b0 [ 352.795262] ? tc_new_tfilter+0x1180/0x1180 [ 352.796103] ? __mod_node_page_state+0x1f/0xc0 [ 352.796974] ? __build_skb_around+0x10e/0x130 [ 352.797826] netlink_dump+0x2c0/0x560 [ 352.798563] ? netlink_getsockopt+0x430/0x430 [ 352.799433] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.800542] __netlink_dump_start+0x356/0x440 [ 352.801397] rtnetlink_rcv_msg+0x3ff/0x550 [ 352.802190] ? tc_new_tfilter+0x1180/0x1180 [ 352.802872] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.803668] ? tc_new_tfilter+0x1180/0x1180 [ 352.804344] ? _copy_from_iter_nocache+0x800/0x800 [ 352.805202] ? kasan_set_track+0x1c/0x30 [ 352.805900] netlink_rcv_skb+0xc6/0x1f0 [ 352.806587] ? rht_deferred_worker+0x6b0/0x6b0 [ 352.807455] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.808324] ? netlink_ack+0x4d0/0x4d0 [ 352.809086] ? netlink_deliver_tap+0x62/0x3d0 [ 352.809951] netlink_unicast+0x353/0x480 [ 352.810744] ? netlink_attachskb+0x430/0x430 [ 352.811586] ? __alloc_skb+0xd7/0x200 [ 352.812349] netlink_sendmsg+0x396/0x680 [ 352.813132] ? netlink_unicast+0x480/0x480 [ 352.813952] ? __import_iovec+0x192/0x210 [ 352.814759] ? netlink_unicast+0x480/0x480 [ 352.815580] sock_sendmsg+0x6c/0x80 [ 352.816299] ____sys_sendmsg+0x3a5/0x3c0 [ 352.817096] ? kernel_sendmsg+0x30/0x30 [ 352.817873] ? __ia32_sys_recvmmsg+0x150/0x150 [ 352.818753] ___sys_sendmsg+0xd8/0x140 [ 352.819518] ? sendmsg_copy_msghdr+0x110/0x110 [ 352.820402] ? ___sys_recvmsg+0xf4/0x1a0 [ 352.821110] ? __copy_msghdr_from_user+0x260/0x260 [ 352.821934] ? _raw_spin_lock+0x81/0xd0 [ 352.822680] ? __handle_mm_fault+0xef3/0x1b20 [ 352.823549] ? rb_insert_color+0x2a/0x270 [ 352.824373] ? copy_page_range+0x16b0/0x16b0 [ 352.825209] ? perf_event_update_userpage+0x2d0/0x2d0 [ 352.826190] ? __fget_light+0xd9/0xf0 [ 352.826941] __sys_sendmsg+0xb3/0x130 [ 352.827613] ? __sys_sendmsg_sock+0x20/0x20 [ 352.828377] ? do_user_addr_fault+0x2c5/0x8a0 [ 352.829184] ? fpregs_assert_state_consistent+0x52/0x60 [ 352.830001] ? exit_to_user_mode_prepare+0x32/0x160 [ 352.830845] do_syscall_64+0x35/0x80 [ 352.831445] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.832331] RIP: 0033:0x7f7bee973c17 [ ---truncated--- |
| CVE-2021-47401 | In the Linux kernel, the following vulnerability has been resolved: ipack: ipoctal: fix stack information leak The tty driver name is used also after registering the driver and must specifically not be allocated on the stack to avoid leaking information to user space (or triggering an oops). Drivers should not try to encode topology information in the tty device name but this one snuck in through staging without anyone noticing and another driver has since copied this malpractice. Fixing the ABI is a separate issue, but this at least plugs the security hole. |
| CVE-2021-47400 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: do not allow call hns3_nic_net_open repeatedly hns3_nic_net_open() is not allowed to called repeatly, but there is no checking for this. When doing device reset and setup tc concurrently, there is a small oppotunity to call hns3_nic_net_open repeatedly, and cause kernel bug by calling napi_enable twice. The calltrace information is like below: [ 3078.222780] ------------[ cut here ]------------ [ 3078.230255] kernel BUG at net/core/dev.c:6991! [ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1 [ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021 [ 3078.276801] Workqueue: hclge hclge_service_task [hclge] [ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 3078.296168] pc : napi_enable+0x80/0x84 tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3] [ 3078.314771] sp : ffff8000108abb20 [ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300 [ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000 [ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880 [ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000 [ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930 [ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4 [ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8 [ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344 [ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938 [ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0 [ 3078.414657] Call trace: [ 3078.418517] napi_enable+0x80/0x84 [ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3] [ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3] [ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge] [ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge] [ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge] [ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge] [ 3078.475675] process_one_work+0x1dc/0x48c [ 3078.481888] worker_thread+0x15c/0x464 [ 3078.487104] kthread+0x160/0x170 [ 3078.492479] ret_from_fork+0x10/0x18 [ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000) [ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]--- Once hns3_nic_net_open() is excute success, the flag HNS3_NIC_STATE_DOWN will be cleared. So add checking for this flag, directly return when HNS3_NIC_STATE_DOWN is no set. |
| CVE-2021-47399 | In the Linux kernel, the following vulnerability has been resolved: ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup The ixgbe driver currently generates a NULL pointer dereference with some machine (online cpus < 63). This is due to the fact that the maximum value of num_xdp_queues is nr_cpu_ids. Code is in "ixgbe_set_rss_queues"". Here's how the problem repeats itself: Some machine (online cpus < 63), And user set num_queues to 63 through ethtool. Code is in the "ixgbe_set_channels", adapter->ring_feature[RING_F_FDIR].limit = count; It becomes 63. When user use xdp, "ixgbe_set_rss_queues" will set queues num. adapter->num_rx_queues = rss_i; adapter->num_tx_queues = rss_i; adapter->num_xdp_queues = ixgbe_xdp_queues(adapter); And rss_i's value is from f = &adapter->ring_feature[RING_F_FDIR]; rss_i = f->indices = f->limit; So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup", for (i = 0; i < adapter->num_rx_queues; i++) if (adapter->xdp_ring[i]->xsk_umem) It leads to panic. Call trace: [exception RIP: ixgbe_xdp+368] RIP: ffffffffc02a76a0 RSP: ffff9fe16202f8d0 RFLAGS: 00010297 RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000001c RDI: ffffffffa94ead90 RBP: ffff92f8f24c0c18 R8: 0000000000000000 R9: 0000000000000000 R10: ffff9fe16202f830 R11: 0000000000000000 R12: ffff92f8f24c0000 R13: ffff9fe16202fc01 R14: 000000000000000a R15: ffffffffc02a7530 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc 8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808 9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235 10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384 11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd 12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb 13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88 14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319 15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290 16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8 17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64 18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9 19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c So I fix ixgbe_max_channels so that it will not allow a setting of queues to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup, take the smaller value of num_rx_queues and num_xdp_queues. |
| CVE-2021-47398 | In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix kernel pointer leak Pointers should be printed with %p or %px rather than cast to 'unsigned long long' and printed with %llx. Change %llx to %p to print the secured pointer. |
| CVE-2021-47397 | In the Linux kernel, the following vulnerability has been resolved: sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb We should always check if skb_header_pointer's return is NULL before using it, otherwise it may cause null-ptr-deref, as syzbot reported: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline] RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196 Call Trace: <IRQ> sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109 ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422 ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c:297 |
| CVE-2021-47396 | In the Linux kernel, the following vulnerability has been resolved: mac80211-hwsim: fix late beacon hrtimer handling Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx that our handling of the hrtimer here is wrong: If the timer fires late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot) then it tries to actually rearm the timer at the next deadline, which might be in the past already: 1 2 3 N N+1 | | | ... | | ^ intended to fire here (1) ^ next deadline here (2) ^ actually fired here The next time it fires, it's later, but will still try to schedule for the next deadline (now 3), etc. until it catches up with N, but that might take a long time, causing stalls etc. Now, all of this is simulation, so we just have to fix it, but note that the behaviour is wrong even per spec, since there's no value then in sending all those beacons unaligned - they should be aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a bit (or a lot) late, then just resume at that point. Therefore, change the code to use hrtimer_forward_now() which will ensure that the next firing of the timer would be at N+1 (in the picture), i.e. the next interval point after the current time. |
| CVE-2021-47395 | In the Linux kernel, the following vulnerability has been resolved: mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap routine in order to fix the following warning reported by syzbot: WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 Modules linked in: CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216 RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000 RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100 R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8 R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004 FS: 00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165 __bpf_tx_skb net/core/filter.c:2114 [inline] __bpf_redirect_no_mac net/core/filter.c:2139 [inline] __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162 ____bpf_clone_redirect net/core/filter.c:2429 [inline] bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234 bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline] __bpf_prog_run include/linux/filter.h:624 [inline] bpf_prog_run include/linux/filter.h:631 [inline] bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663 bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline] __sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 |
| CVE-2021-47394 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unlink table before deleting it syzbot reports following UAF: BUG: KASAN: use-after-free in memcmp+0x18f/0x1c0 lib/string.c:955 nla_strcmp+0xf2/0x130 lib/nlattr.c:836 nft_table_lookup.part.0+0x1a2/0x460 net/netfilter/nf_tables_api.c:570 nft_table_lookup net/netfilter/nf_tables_api.c:4064 [inline] nf_tables_getset+0x1b3/0x860 net/netfilter/nf_tables_api.c:4064 nfnetlink_rcv_msg+0x659/0x13f0 net/netfilter/nfnetlink.c:285 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 Problem is that all get operations are lockless, so the commit_mutex held by nft_rcv_nl_event() isn't enough to stop a parallel GET request from doing read-accesses to the table object even after synchronize_rcu(). To avoid this, unlink the table first and store the table objects in on-stack scratch space. |
| CVE-2021-47393 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs Fan speed minimum can be enforced from sysfs. For example, setting current fan speed to 20 is used to enforce fan speed to be at 100% speed, 19 - to be not below 90% speed, etcetera. This feature provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units or high system ambient temperature. Request for changing fan minimum speed is configuration request and can be set only through 'sysfs' write procedure. In this situation value of argument 'state' is above nominal fan speed maximum. Return non-zero code in this case to avoid thermal_cooling_device_stats_update() call, because in this case statistics update violates thermal statistics table range. The issues is observed in case kernel is configured with option CONFIG_THERMAL_STATISTICS. Here is the trace from KASAN: [ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444 [ 159.545625] Call Trace: [ 159.548366] dump_stack+0x92/0xc1 [ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.635869] thermal_zone_device_update+0x345/0x780 [ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0 [ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core] [ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core] [ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core] [ 160.070233] RIP: 0033:0x7fd995909970 [ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff .. [ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970 [ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001 [ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700 [ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013 [ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013 [ 160.143671] [ 160.145338] Allocated by task 2924: [ 160.149242] kasan_save_stack+0x19/0x40 [ 160.153541] __kasan_kmalloc+0x7f/0xa0 [ 160.157743] __kmalloc+0x1a2/0x2b0 [ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0 [ 160.167687] __thermal_cooling_device_register+0x1b5/0x500 [ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0 [ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan] [ 160.248140] [ 160.249807] The buggy address belongs to the object at ffff888116163400 [ 160.249807] which belongs to the cache kmalloc-1k of size 1024 [ 160.263814] The buggy address is located 64 bytes to the right of [ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800) [ 160.277536] The buggy address belongs to the page: [ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160 [ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0 [ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0 [ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000 [ 160.327033] page dumped because: kasan: bad access detected [ 160.333270] [ 160.334937] Memory state around the buggy address: [ 160.356469] >ffff888116163800: fc .. |
| CVE-2021-47392 | In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix listener leak in rdma_cma_listen_on_all() failure If cma_listen_on_all() fails it leaves the per-device ID still on the listen_list but the state is not set to RDMA_CM_ADDR_BOUND. When the cmid is eventually destroyed cma_cancel_listens() is not called due to the wrong state, however the per-device IDs are still holding the refcount preventing the ID from being destroyed, thus deadlocking: task:rping state:D stack: 0 pid:19605 ppid: 47036 flags:0x00000084 Call Trace: __schedule+0x29a/0x780 ? free_unref_page_commit+0x9b/0x110 schedule+0x3c/0xa0 schedule_timeout+0x215/0x2b0 ? __flush_work+0x19e/0x1e0 wait_for_completion+0x8d/0xf0 _destroy_id+0x144/0x210 [rdma_cm] ucma_close_id+0x2b/0x40 [rdma_ucm] __destroy_id+0x93/0x2c0 [rdma_ucm] ? __xa_erase+0x4a/0xa0 ucma_destroy_id+0x9a/0x120 [rdma_ucm] ucma_write+0xb8/0x130 [rdma_ucm] vfs_write+0xb4/0x250 ksys_write+0xb5/0xd0 ? syscall_trace_enter.isra.19+0x123/0x190 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Ensure that cma_listen_on_all() atomically unwinds its action under the lock during error. |
| CVE-2021-47391 | In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Ensure rdma_addr_cancel() happens before issuing more requests The FSM can run in a circle allowing rdma_resolve_ip() to be called twice on the same id_priv. While this cannot happen without going through the work, it violates the invariant that the same address resolution background request cannot be active twice. CPU 1 CPU 2 rdma_resolve_addr(): RDMA_CM_IDLE -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) #1 process_one_req(): for #1 addr_handler(): RDMA_CM_ADDR_QUERY -> RDMA_CM_ADDR_BOUND mutex_unlock(&id_priv->handler_mutex); [.. handler still running ..] rdma_resolve_addr(): RDMA_CM_ADDR_BOUND -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) !! two requests are now on the req_list rdma_destroy_id(): destroy_id_handler_unlock(): _destroy_id(): cma_cancel_operation(): rdma_addr_cancel() // process_one_req() self removes it spin_lock_bh(&lock); cancel_delayed_work(&req->work); if (!list_empty(&req->list)) == true ! rdma_addr_cancel() returns after process_on_req #1 is done kfree(id_priv) process_one_req(): for #2 addr_handler(): mutex_lock(&id_priv->handler_mutex); !! Use after free on id_priv rdma_addr_cancel() expects there to be one req on the list and only cancels the first one. The self-removal behavior of the work only happens after the handler has returned. This yields a situations where the req_list can have two reqs for the same "handle" but rdma_addr_cancel() only cancels the first one. The second req remains active beyond rdma_destroy_id() and will use-after-free id_priv once it inevitably triggers. Fix this by remembering if the id_priv has called rdma_resolve_ip() and always cancel before calling it again. This ensures the req_list never gets more than one item in it and doesn't cost anything in the normal flow that never uses this strange error path. |
| CVE-2021-47390 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix stack-out-of-bounds memory access from ioapic_write_indirect() KASAN reports the following issue: BUG: KASAN: stack-out-of-bounds in kvm_make_vcpus_request_mask+0x174/0x440 [kvm] Read of size 8 at addr ffffc9001364f638 by task qemu-kvm/4798 CPU: 0 PID: 4798 Comm: qemu-kvm Tainted: G X --------- --- Hardware name: AMD Corporation DAYTONA_X/DAYTONA_X, BIOS RYM0081C 07/13/2020 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x130 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] __kasan_report.cold+0x7f/0x114 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kasan_report+0x38/0x50 kasan_check_range+0xf5/0x1d0 kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kvm_make_scan_ioapic_request_mask+0x84/0xc0 [kvm] ? kvm_arch_exit+0x110/0x110 [kvm] ? sched_clock+0x5/0x10 ioapic_write_indirect+0x59f/0x9e0 [kvm] ? static_obj+0xc0/0xc0 ? __lock_acquired+0x1d2/0x8c0 ? kvm_ioapic_eoi_inject_work+0x120/0x120 [kvm] The problem appears to be that 'vcpu_bitmap' is allocated as a single long on stack and it should really be KVM_MAX_VCPUS long. We also seem to clear the lower 16 bits of it with bitmap_zero() for no particular reason (my guess would be that 'bitmap' and 'vcpu_bitmap' variables in kvm_bitmap_or_dest_vcpus() caused the confusion: while the later is indeed 16-bit long, the later should accommodate all possible vCPUs). |
| CVE-2021-47389 | In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: fix missing sev_decommission in sev_receive_start DECOMMISSION the current SEV context if binding an ASID fails after RECEIVE_START. Per AMD's SEV API, RECEIVE_START generates a new guest context and thus needs to be paired with DECOMMISSION: The RECEIVE_START command is the only command other than the LAUNCH_START command that generates a new guest context and guest handle. The missing DECOMMISSION can result in subsequent SEV launch failures, as the firmware leaks memory and might not able to allocate more SEV guest contexts in the future. Note, LAUNCH_START suffered the same bug, but was previously fixed by commit 934002cd660b ("KVM: SVM: Call SEV Guest Decommission if ASID binding fails"). |
| CVE-2021-47388 | In the Linux kernel, the following vulnerability has been resolved: mac80211: fix use-after-free in CCMP/GCMP RX When PN checking is done in mac80211, for fragmentation we need to copy the PN to the RX struct so we can later use it to do a comparison, since commit bf30ca922a0c ("mac80211: check defrag PN against current frame"). Unfortunately, in that commit I used the 'hdr' variable without it being necessarily valid, so use-after-free could occur if it was necessary to reallocate (parts of) the frame. Fix this by reloading the variable after the code that results in the reallocations, if any. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401. |
| CVE-2021-47387 | In the Linux kernel, the following vulnerability has been resolved: cpufreq: schedutil: Use kobject release() method to free sugov_tunables The struct sugov_tunables is protected by the kobject, so we can't free it directly. Otherwise we would get a call trace like this: ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x30 WARNING: CPU: 3 PID: 720 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100 Modules linked in: CPU: 3 PID: 720 Comm: a.sh Tainted: G W 5.14.0-rc1-next-20210715-yocto-standard+ #507 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) pc : debug_print_object+0xb8/0x100 lr : debug_print_object+0xb8/0x100 sp : ffff80001ecaf910 x29: ffff80001ecaf910 x28: ffff00011b10b8d0 x27: ffff800011043d80 x26: ffff00011a8f0000 x25: ffff800013cb3ff0 x24: 0000000000000000 x23: ffff80001142aa68 x22: ffff800011043d80 x21: ffff00010de46f20 x20: ffff800013c0c520 x19: ffff800011d8f5b0 x18: 0000000000000010 x17: 6e6968207473696c x16: 5f72656d6974203a x15: 6570797420746365 x14: 6a626f2029302065 x13: 303378302f307830 x12: 2b6e665f72656d69 x11: ffff8000124b1560 x10: ffff800012331520 x9 : ffff8000100ca6b0 x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 0000000000000001 x5 : ffff800011d8c000 x4 : ffff800011d8c740 x3 : 0000000000000000 x2 : ffff0001108301c0 x1 : ab3c90eedf9c0f00 x0 : 0000000000000000 Call trace: debug_print_object+0xb8/0x100 __debug_check_no_obj_freed+0x1c0/0x230 debug_check_no_obj_freed+0x20/0x88 slab_free_freelist_hook+0x154/0x1c8 kfree+0x114/0x5d0 sugov_exit+0xbc/0xc0 cpufreq_exit_governor+0x44/0x90 cpufreq_set_policy+0x268/0x4a8 store_scaling_governor+0xe0/0x128 store+0xc0/0xf0 sysfs_kf_write+0x54/0x80 kernfs_fop_write_iter+0x128/0x1c0 new_sync_write+0xf0/0x190 vfs_write+0x2d4/0x478 ksys_write+0x74/0x100 __arm64_sys_write+0x24/0x30 invoke_syscall.constprop.0+0x54/0xe0 do_el0_svc+0x64/0x158 el0_svc+0x2c/0xb0 el0t_64_sync_handler+0xb0/0xb8 el0t_64_sync+0x198/0x19c irq event stamp: 5518 hardirqs last enabled at (5517): [<ffff8000100cbd7c>] console_unlock+0x554/0x6c8 hardirqs last disabled at (5518): [<ffff800010fc0638>] el1_dbg+0x28/0xa0 softirqs last enabled at (5504): [<ffff8000100106e0>] __do_softirq+0x4d0/0x6c0 softirqs last disabled at (5483): [<ffff800010049548>] irq_exit+0x1b0/0x1b8 So split the original sugov_tunables_free() into two functions, sugov_clear_global_tunables() is just used to clear the global_tunables and the new sugov_tunables_free() is used as kobj_type::release to release the sugov_tunables safely. |
| CVE-2021-47386 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multi-line alignment] |
| CVE-2021-47385 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multipline alignment] |
| CVE-2021-47384 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field If driver read tmp value sufficient for (tmp & 0x08) && (!(tmp & 0x80)) && ((tmp & 0x7) == ((tmp >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multi-line alignments] |
| CVE-2021-47383 | In the Linux kernel, the following vulnerability has been resolved: tty: Fix out-of-bound vmalloc access in imageblit This issue happens when a userspace program does an ioctl FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct containing only the fields xres, yres, and bits_per_pixel with values. If this struct is the same as the previous ioctl, the vc_resize() detects it and doesn't call the resize_screen(), leaving the fb_var_screeninfo incomplete. And this leads to the updatescrollmode() calculates a wrong value to fbcon_display->vrows, which makes the real_y() return a wrong value of y, and that value, eventually, causes the imageblit to access an out-of-bound address value. To solve this issue I made the resize_screen() be called even if the screen does not need any resizing, so it will "fix and fill" the fb_var_screeninfo independently. |
| CVE-2021-47382 | In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix deadlock during failing recovery Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed taking discipline_mutex inside qeth_do_reset(), fixing potential deadlocks. An error path was missed though, that still takes discipline_mutex and thus has the original deadlock potential. Intermittent deadlocks were seen when a qeth channel path is configured offline, causing a race between qeth_do_reset and ccwgroup_remove. Call qeth_set_offline() directly in the qeth_do_reset() error case and then a new variant of ccwgroup_set_offline(), without taking discipline_mutex. |
| CVE-2021-47381 | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Fix DSP oops stack dump output contents Fix @buf arg given to hex_dump_to_buffer() and stack address used in dump error output. |
| CVE-2021-47380 | In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix potential NULL pointer dereference devm_add_action_or_reset() can suddenly invoke amd_mp2_pci_remove() at registration that will cause NULL pointer dereference since corresponding data is not initialized yet. The patch moves initialization of data before devm_add_action_or_reset(). Found by Linux Driver Verification project (linuxtesting.org). [[email protected]: rebase] |
| CVE-2021-47379 | In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] r ---truncated--- |
| CVE-2021-47378 | In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: destroy cm id before destroy qp to avoid use after free We should always destroy cm_id before destroy qp to avoid to get cma event after qp was destroyed, which may lead to use after free. In RDMA connection establishment error flow, don't destroy qp in cm event handler.Just report cm_error to upper level, qp will be destroy in nvme_rdma_alloc_queue() after destroy cm id. |
| CVE-2021-47376 | In the Linux kernel, the following vulnerability has been resolved: bpf: Add oversize check before call kvcalloc() Commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") add the oversize check. When the allocation is larger than what kmalloc() supports, the following warning triggered: WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597 Modules linked in: CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597 Call Trace: kvmalloc include/linux/mm.h:806 [inline] kvmalloc_array include/linux/mm.h:824 [inline] kvcalloc include/linux/mm.h:829 [inline] check_btf_line kernel/bpf/verifier.c:9925 [inline] check_btf_info kernel/bpf/verifier.c:10049 [inline] bpf_check+0xd634/0x150d0 kernel/bpf/verifier.c:13759 bpf_prog_load kernel/bpf/syscall.c:2301 [inline] __sys_bpf+0x11181/0x126e0 kernel/bpf/syscall.c:4587 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x78/0x90 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47375 | In the Linux kernel, the following vulnerability has been resolved: blktrace: Fix uaf in blk_trace access after removing by sysfs There is an use-after-free problem triggered by following process: P1(sda) P2(sdb) echo 0 > /sys/block/sdb/trace/enable blk_trace_remove_queue synchronize_rcu blk_trace_free relay_close rcu_read_lock __blk_add_trace trace_note_tsk (Iterate running_trace_list) relay_close_buf relay_destroy_buf kfree(buf) trace_note(sdb's bt) relay_reserve buf->offset <- nullptr deference (use-after-free) !!! rcu_read_unlock [ 502.714379] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 502.715260] #PF: supervisor read access in kernel mode [ 502.715903] #PF: error_code(0x0000) - not-present page [ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0 [ 502.717252] Oops: 0000 [#1] SMP [ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360 [ 502.732872] Call Trace: [ 502.733193] __blk_add_trace.cold+0x137/0x1a3 [ 502.733734] blk_add_trace_rq+0x7b/0xd0 [ 502.734207] blk_add_trace_rq_issue+0x54/0xa0 [ 502.734755] blk_mq_start_request+0xde/0x1b0 [ 502.735287] scsi_queue_rq+0x528/0x1140 ... [ 502.742704] sg_new_write.isra.0+0x16e/0x3e0 [ 502.747501] sg_ioctl+0x466/0x1100 Reproduce method: ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sda, BLKTRACESTART) ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sdb, BLKTRACESTART) echo 0 > /sys/block/sdb/trace/enable & // Add delay(mdelay/msleep) before kernel enters blk_trace_free() ioctl$SG_IO(/dev/sda, SG_IO, ...) // Enters trace_note_tsk() after blk_trace_free() returned // Use mdelay in rcu region rather than msleep(which may schedule out) Remove blk_trace from running_list before calling blk_trace_free() by sysfs if blk_trace is at Blktrace_running state. |
| CVE-2021-47374 | In the Linux kernel, the following vulnerability has been resolved: dma-debug: prevent an error message from causing runtime problems For some drivers, that use the DMA API. This error message can be reached several millions of times per second, causing spam to the kernel's printk buffer and bringing the CPU usage up to 100% (so, it should be rate limited). However, since there is at least one driver that is in the mainline and suffers from the error condition, it is more useful to err_printk() here instead of just rate limiting the error message (in hopes that it will make it easier for other drivers that suffer from this issue to be spotted). |
| CVE-2021-47373 | In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Fix potential VPE leak on error In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error, there is an off-by-one in the number of VPEs to be freed. Fix it by simply passing the number of VPEs allocated, which is the index of the loop iterating over the VPEs. [maz: fixed commit message] |
| CVE-2021-47372 | In the Linux kernel, the following vulnerability has been resolved: net: macb: fix use after free on rmmod plat_dev->dev->platform_data is released by platform_device_unregister(), use of pclk and hclk is a use-after-free. Since device unregister won't need a clk device we adjust the function call sequence to fix this issue. [ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci] [ 31.275563] Freed by task 306: [ 30.276782] platform_device_release+0x25/0x80 |
| CVE-2021-47371 | In the Linux kernel, the following vulnerability has been resolved: nexthop: Fix memory leaks in nexthop notification chain listeners syzkaller discovered memory leaks [1] that can be reduced to the following commands: # ip nexthop add id 1 blackhole # devlink dev reload pci/0000:06:00.0 As part of the reload flow, mlxsw will unregister its netdevs and then unregister from the nexthop notification chain. Before unregistering from the notification chain, mlxsw will receive delete notifications for nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw will not receive notifications for nexthops using netdevs that are not dismantled as part of the reload flow. For example, the blackhole nexthop above that internally uses the loopback netdev as its nexthop device. One way to fix this problem is to have listeners flush their nexthop tables after unregistering from the notification chain. This is error-prone as evident by this patch and also not symmetric with the registration path where a listener receives a dump of all the existing nexthops. Therefore, fix this problem by replaying delete notifications for the listener being unregistered. This is symmetric to the registration path and also consistent with the netdev notification chain. The above means that unregister_nexthop_notifier(), like register_nexthop_notifier(), will have to take RTNL in order to iterate over the existing nexthops and that any callers of the function cannot hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN driver. To avoid a deadlock, change the latter to unregister its nexthop listener without holding RTNL, making it symmetric to the registration path. [1] unreferenced object 0xffff88806173d600 (size 512): comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s) hex dump (first 32 bytes): 41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff A..`......sa.... 08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00 ..sa............ backtrace: [<ffffffff81a6b576>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<ffffffff81a6b576>] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522 [<ffffffff81a716d3>] slab_alloc_node mm/slub.c:3206 [inline] [<ffffffff81a716d3>] slab_alloc mm/slub.c:3214 [inline] [<ffffffff81a716d3>] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231 [<ffffffff82e8681a>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff82e8681a>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239 [<ffffffff813ef67d>] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83 [<ffffffff813f0662>] blocking_notifier_call_chain kernel/notifier.c:318 [inline] [<ffffffff813f0662>] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306 [<ffffffff8384b9c6>] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244 [<ffffffff83852bd8>] insert_nexthop net/ipv4/nexthop.c:2336 [inline] [<ffffffff83852bd8>] nexthop_add net/ipv4/nexthop.c:2644 [inline] [<ffffffff83852bd8>] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913 [<ffffffff833e9a78>] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572 [<ffffffff83608703>] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504 [<ffffffff833de032>] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590 [<ffffffff836069de>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<ffffffff836069de>] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340 [<ffffffff83607501>] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929 [<ffffffff832fde84>] sock_sendmsg_nosec net/socket.c:704 [inline ---truncated--- |
| CVE-2021-47370 | In the Linux kernel, the following vulnerability has been resolved: mptcp: ensure tx skbs always have the MPTCP ext Due to signed/unsigned comparison, the expression: info->size_goal - skb->len > 0 evaluates to true when the size goal is smaller than the skb size. That results in lack of tx cache refill, so that the skb allocated by the core TCP code lacks the required MPTCP skb extensions. Due to the above, syzbot is able to trigger the following WARN_ON(): WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Modules linked in: CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9 RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216 RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000 RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003 RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280 R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0 FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003 release_sock+0xb4/0x1b0 net/core/sock.c:3206 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057 call_write_iter include/linux/fs.h:2163 [inline] new_sync_write+0x40b/0x640 fs/read_write.c:507 vfs_write+0x7cf/0xae0 fs/read_write.c:594 ksys_write+0x1ee/0x250 fs/read_write.c:647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9 RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038 R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000 Fix the issue rewriting the relevant expression to avoid sign-related problems - note: size_goal is always >= 0. Additionally, ensure that the skb in the tx cache always carries the relevant extension. |
| CVE-2021-47369 | In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix NULL deref in qeth_clear_working_pool_list() When qeth_set_online() calls qeth_clear_working_pool_list() to roll back after an error exit from qeth_hardsetup_card(), we are at risk of accessing card->qdio.in_q before it was allocated by qeth_alloc_qdio_queues() via qeth_mpc_initialize(). qeth_clear_working_pool_list() then dereferences NULL, and by writing to queue->bufs[i].pool_entry scribbles all over the CPU's lowcore. Resulting in a crash when those lowcore areas are used next (eg. on the next machine-check interrupt). Such a scenario would typically happen when the device is first set online and its queues aren't allocated yet. An early IO error or certain misconfigs (eg. mismatched transport mode, bad portno) then cause us to error out from qeth_hardsetup_card() with card->qdio.in_q still being NULL. Fix it by checking the pointer for NULL before accessing it. Note that we also have (rare) paths inside qeth_mpc_initialize() where a configuration change can cause us to free the existing queues, expecting that subsequent code will allocate them again. If we then error out before that re-allocation happens, the same bug occurs. Root-caused-by: Heiko Carstens <[email protected]> |
| CVE-2021-47368 | In the Linux kernel, the following vulnerability has been resolved: enetc: Fix illegal access when reading affinity_hint irq_set_affinity_hit() stores a reference to the cpumask_t parameter in the irq descriptor, and that reference can be accessed later from irq_affinity_hint_proc_show(). Since the cpu_mask parameter passed to irq_set_affinity_hit() has only temporary storage (it's on the stack memory), later accesses to it are illegal. Thus reads from the corresponding procfs affinity_hint file can result in paging request oops. The issue is fixed by the get_cpu_mask() helper, which provides a permanent storage for the cpumask_t parameter. |
| CVE-2021-47367 | In the Linux kernel, the following vulnerability has been resolved: virtio-net: fix pages leaking when building skb in big mode We try to use build_skb() if we had sufficient tailroom. But we forget to release the unused pages chained via private in big mode which will leak pages. Fixing this by release the pages after building the skb in big mode. |
| CVE-2021-47366 | In the Linux kernel, the following vulnerability has been resolved: afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server AFS-3 has two data fetch RPC variants, FS.FetchData and FS.FetchData64, and Linux's afs client switches between them when talking to a non-YFS server if the read size, the file position or the sum of the two have the upper 32 bits set of the 64-bit value. This is a problem, however, since the file position and length fields of FS.FetchData are *signed* 32-bit values. Fix this by capturing the capability bits obtained from the fileserver when it's sent an FS.GetCapabilities RPC, rather than just discarding them, and then picking out the VICED_CAPABILITY_64BITFILES flag. This can then be used to decide whether to use FS.FetchData or FS.FetchData64 - and also FS.StoreData or FS.StoreData64 - rather than using upper_32_bits() to switch on the parameter values. This capabilities flag could also be used to limit the maximum size of the file, but all servers must be checked for that. Note that the issue does not exist with FS.StoreData - that uses *unsigned* 32-bit values. It's also not a problem with Auristor servers as its YFS.FetchData64 op uses unsigned 64-bit values. This can be tested by cloning a git repo through an OpenAFS client to an OpenAFS server and then doing "git status" on it from a Linux afs client[1]. Provided the clone has a pack file that's in the 2G-4G range, the git status will show errors like: error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index This can be observed in the server's FileLog with something like the following appearing: Sun Aug 29 19:31:39 2021 SRXAFS_FetchData, Fid = 2303380852.491776.3263114, Host 192.168.11.201:7001, Id 1001 Sun Aug 29 19:31:39 2021 CheckRights: len=0, for host=192.168.11.201:7001 Sun Aug 29 19:31:39 2021 FetchData_RXStyle: Pos 18446744071815340032, Len 3154 Sun Aug 29 19:31:39 2021 FetchData_RXStyle: file size 2400758866 ... Sun Aug 29 19:31:40 2021 SRXAFS_FetchData returns 5 Note the file position of 18446744071815340032. This is the requested file position sign-extended. |
| CVE-2021-47365 | In the Linux kernel, the following vulnerability has been resolved: afs: Fix page leak There's a loop in afs_extend_writeback() that adds extra pages to a write we want to make to improve the efficiency of the writeback by making it larger. This loop stops, however, if we hit a page we can't write back from immediately, but it doesn't get rid of the page ref we speculatively acquired. This was caused by the removal of the cleanup loop when the code switched from using find_get_pages_contig() to xarray scanning as the latter only gets a single page at a time, not a batch. Fix this by putting the page on a ref on an early break from the loop. Unfortunately, we can't just add that page to the pagevec we're employing as we'll go through that and add those pages to the RPC call. This was found by the generic/074 test. It leaks ~4GiB of RAM each time it is run - which can be observed with "top". |
| CVE-2021-47364 | In the Linux kernel, the following vulnerability has been resolved: comedi: Fix memory leak in compat_insnlist() `compat_insnlist()` handles the 32-bit version of the `COMEDI_INSNLIST` ioctl (whenwhen `CONFIG_COMPAT` is enabled). It allocates memory to temporarily hold an array of `struct comedi_insn` converted from the 32-bit version in user space. This memory is only being freed if there is a fault while filling the array, otherwise it is leaked. Add a call to `kfree()` to fix the leak. |
| CVE-2021-47363 | In the Linux kernel, the following vulnerability has been resolved: nexthop: Fix division by zero while replacing a resilient group The resilient nexthop group torture tests in fib_nexthop.sh exposed a possible division by zero while replacing a resilient group [1]. The division by zero occurs when the data path sees a resilient nexthop group with zero buckets. The tests replace a resilient nexthop group in a loop while traffic is forwarded through it. The tests do not specify the number of buckets while performing the replacement, resulting in the kernel allocating a stub resilient table (i.e, 'struct nh_res_table') with zero buckets. This table should never be visible to the data path, but the old nexthop group (i.e., 'oldg') might still be used by the data path when the stub table is assigned to it. Fix this by only assigning the stub table to the old nexthop group after making sure the group is no longer used by the data path. Tested with fib_nexthops.sh: Tests passed: 222 Tests failed: 0 [1] divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 1850 Comm: ping Not tainted 5.14.0-custom-10271-ga86eb53057fe #1107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:nexthop_select_path+0x2d2/0x1a80 [...] Call Trace: fib_select_multipath+0x79b/0x1530 fib_select_path+0x8fb/0x1c10 ip_route_output_key_hash_rcu+0x1198/0x2da0 ip_route_output_key_hash+0x190/0x340 ip_route_output_flow+0x21/0x120 raw_sendmsg+0x91d/0x2e10 inet_sendmsg+0x9e/0xe0 __sys_sendto+0x23d/0x360 __x64_sys_sendto+0xe1/0x1b0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47362 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Update intermediate power state for SI Update the current state as boot state during dpm initialization. During the subsequent initialization, set_power_state gets called to transition to the final power state. set_power_state refers to values from the current state and without current state populated, it could result in NULL pointer dereference. For ex: on platforms where PCI speed change is supported through ACPI ATCS method, the link speed of current state needs to be queried before deciding on changing to final power state's link speed. The logic to query ATCS-support was broken on certain platforms. The issue became visible when broken ATCS-support logic got fixed with commit f9b7f3703ff9 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)"). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1698 |
| CVE-2021-47361 | In the Linux kernel, the following vulnerability has been resolved: mcb: fix error handling in mcb_alloc_bus() There are two bugs: 1) If ida_simple_get() fails then this code calls put_device(carrier) but we haven't yet called get_device(carrier) and probably that leads to a use after free. 2) After device_initialize() then we need to use put_device() to release the bus. This will free the internal resources tied to the device and call mcb_free_bus() which will free the rest. |
| CVE-2021-47360 | In the Linux kernel, the following vulnerability has been resolved: binder: make sure fd closes complete During BC_FREE_BUFFER processing, the BINDER_TYPE_FDA object cleanup may close 1 or more fds. The close operations are completed using the task work mechanism -- which means the thread needs to return to userspace or the file object may never be dereferenced -- which can lead to hung processes. Force the binder thread back to userspace if an fd is closed during BC_FREE_BUFFER handling. |
| CVE-2021-47359 | In the Linux kernel, the following vulnerability has been resolved: cifs: Fix soft lockup during fsstress Below traces are observed during fsstress and system got hung. [ 130.698396] watchdog: BUG: soft lockup - CPU#6 stuck for 26s! |
| CVE-2021-47358 | In the Linux kernel, the following vulnerability has been resolved: staging: greybus: uart: fix tty use after free User space can hold a tty open indefinitely and tty drivers must not release the underlying structures until the last user is gone. Switch to using the tty-port reference counter to manage the life time of the greybus tty state to avoid use after free after a disconnect. |
| CVE-2021-47357 | In the Linux kernel, the following vulnerability has been resolved: atm: iphase: fix possible use-after-free in ia_module_exit() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. |
| CVE-2021-47356 | In the Linux kernel, the following vulnerability has been resolved: mISDN: fix possible use-after-free in HFC_cleanup() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. |
| CVE-2021-47355 | In the Linux kernel, the following vulnerability has been resolved: atm: nicstar: Fix possible use-after-free in nicstar_cleanup() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. |
| CVE-2021-47354 | In the Linux kernel, the following vulnerability has been resolved: drm/sched: Avoid data corruptions Wait for all dependencies of a job to complete before killing it to avoid data corruptions. |
| CVE-2021-47353 | In the Linux kernel, the following vulnerability has been resolved: udf: Fix NULL pointer dereference in udf_symlink function In function udf_symlink, epos.bh is assigned with the value returned by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c and returns the value of sb_getblk function that could be NULL. Then, epos.bh is used without any check, causing a possible NULL pointer dereference when sb_getblk fails. This fix adds a check to validate the value of epos.bh. |
| CVE-2021-47352 | In the Linux kernel, the following vulnerability has been resolved: virtio-net: Add validation for used length This adds validation for used length (might come from an untrusted device) to avoid data corruption or loss. |
| CVE-2021-47351 | In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix races between xattr_{set|get} and listxattr operations UBIFS may occur some problems with concurrent xattr_{set|get} and listxattr operations, such as assertion failure, memory corruption, stale xattr value[1]. Fix it by importing a new rw-lock in @ubifs_inode to serilize write operations on xattr, concurrent read operations are still effective, just like ext4. [1] https://lore.kernel.org/linux-mtd/[email protected] |
| CVE-2021-47350 | In the Linux kernel, the following vulnerability has been resolved: powerpc/mm: Fix lockup on kernel exec fault The powerpc kernel is not prepared to handle exec faults from kernel. Especially, the function is_exec_fault() will return 'false' when an exec fault is taken by kernel, because the check is based on reading current->thread.regs->trap which contains the trap from user. For instance, when provoking a LKDTM EXEC_USERSPACE test, current->thread.regs->trap is set to SYSCALL trap (0xc00), and the fault taken by the kernel is not seen as an exec fault by set_access_flags_filter(). Commit d7df2443cd5f ("powerpc/mm: Fix spurious segfaults on radix with autonuma") made it clear and handled it properly. But later on commit d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute faults") removed that handling, introducing test based on error_code. And here is the problem, because on the 603 all upper bits of SRR1 get cleared when the TLB instruction miss handler bails out to ISI. Until commit cbd7e6ca0210 ("powerpc/fault: Avoid heavy search_exception_tables() verification"), an exec fault from kernel at a userspace address was indirectly caught by the lack of entry for that address in the exception tables. But after that commit the kernel mainly relies on KUAP or on core mm handling to catch wrong user accesses. Here the access is not wrong, so mm handles it. It is a minor fault because PAGE_EXEC is not set, set_access_flags_filter() should set PAGE_EXEC and voila. But as is_exec_fault() returns false as explained in the beginning, set_access_flags_filter() bails out without setting PAGE_EXEC flag, which leads to a forever minor exec fault. As the kernel is not prepared to handle such exec faults, the thing to do is to fire in bad_kernel_fault() for any exec fault taken by the kernel, as it was prior to commit d3ca587404b3. |
| CVE-2021-47349 | In the Linux kernel, the following vulnerability has been resolved: mwifiex: bring down link before deleting interface We can deadlock when rmmod'ing the driver or going through firmware reset, because the cfg80211_unregister_wdev() has to bring down the link for us, ... which then grab the same wiphy lock. nl80211_del_interface() already handles a very similar case, with a nice description: /* * We hold RTNL, so this is safe, without RTNL opencount cannot * reach 0, and thus the rdev cannot be deleted. * * We need to do it for the dev_close(), since that will call * the netdev notifiers, and we need to acquire the mutex there * but don't know if we get there from here or from some other * place (e.g. "ip link set ... down"). */ mutex_unlock(&rdev->wiphy.mtx); ... Do similarly for mwifiex teardown, by ensuring we bring the link down first. Sample deadlock trace: [ 247.103516] INFO: task rmmod:2119 blocked for more than 123 seconds. [ 247.110630] Not tainted 5.12.4 #5 [ 247.115796] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.124557] task:rmmod state:D stack: 0 pid: 2119 ppid: 2114 flags:0x00400208 [ 247.133905] Call trace: [ 247.136644] __switch_to+0x130/0x170 [ 247.140643] __schedule+0x714/0xa0c [ 247.144548] schedule_preempt_disabled+0x88/0xf4 [ 247.149714] __mutex_lock_common+0x43c/0x750 [ 247.154496] mutex_lock_nested+0x5c/0x68 [ 247.158884] cfg80211_netdev_notifier_call+0x280/0x4e0 [cfg80211] [ 247.165769] raw_notifier_call_chain+0x4c/0x78 [ 247.170742] call_netdevice_notifiers_info+0x68/0xa4 [ 247.176305] __dev_close_many+0x7c/0x138 [ 247.180693] dev_close_many+0x7c/0x10c [ 247.184893] unregister_netdevice_many+0xfc/0x654 [ 247.190158] unregister_netdevice_queue+0xb4/0xe0 [ 247.195424] _cfg80211_unregister_wdev+0xa4/0x204 [cfg80211] [ 247.201816] cfg80211_unregister_wdev+0x20/0x2c [cfg80211] [ 247.208016] mwifiex_del_virtual_intf+0xc8/0x188 [mwifiex] [ 247.214174] mwifiex_uninit_sw+0x158/0x1b0 [mwifiex] [ 247.219747] mwifiex_remove_card+0x38/0xa0 [mwifiex] [ 247.225316] mwifiex_pcie_remove+0xd0/0xe0 [mwifiex_pcie] [ 247.231451] pci_device_remove+0x50/0xe0 [ 247.235849] device_release_driver_internal+0x110/0x1b0 [ 247.241701] driver_detach+0x5c/0x9c [ 247.245704] bus_remove_driver+0x84/0xb8 [ 247.250095] driver_unregister+0x3c/0x60 [ 247.254486] pci_unregister_driver+0x2c/0x90 [ 247.259267] cleanup_module+0x18/0xcdc [mwifiex_pcie] |
| CVE-2021-47348 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid HDCP over-read and corruption Instead of reading the desired 5 bytes of the actual target field, the code was reading 8. This could result in a corrupted value if the trailing 3 bytes were non-zero, so instead use an appropriately sized and zero-initialized bounce buffer, and read only 5 bytes before casting to u64. |
| CVE-2021-47347 | In the Linux kernel, the following vulnerability has been resolved: wl1251: Fix possible buffer overflow in wl1251_cmd_scan Function wl1251_cmd_scan calls memcpy without checking the length. Harden by checking the length is within the maximum allowed size. |
| CVE-2021-47346 | In the Linux kernel, the following vulnerability has been resolved: coresight: tmc-etf: Fix global-out-of-bounds in tmc_update_etf_buffer() commit 6f755e85c332 ("coresight: Add helper for inserting synchronization packets") removed trailing '\0' from barrier_pkt array and updated the call sites like etb_update_buffer() to have proper checks for barrier_pkt size before read but missed updating tmc_update_etf_buffer() which still reads barrier_pkt past the array size resulting in KASAN out-of-bounds bug. Fix this by adding a check for barrier_pkt size before accessing like it is done in etb_update_buffer(). BUG: KASAN: global-out-of-bounds in tmc_update_etf_buffer+0x4b8/0x698 Read of size 4 at addr ffffffd05b7d1030 by task perf/2629 Call trace: dump_backtrace+0x0/0x27c show_stack+0x20/0x2c dump_stack+0x11c/0x188 print_address_description+0x3c/0x4a4 __kasan_report+0x140/0x164 kasan_report+0x10/0x18 __asan_report_load4_noabort+0x1c/0x24 tmc_update_etf_buffer+0x4b8/0x698 etm_event_stop+0x248/0x2d8 etm_event_del+0x20/0x2c event_sched_out+0x214/0x6f0 group_sched_out+0xd0/0x270 ctx_sched_out+0x2ec/0x518 __perf_event_task_sched_out+0x4fc/0xe6c __schedule+0x1094/0x16a0 preempt_schedule_irq+0x88/0x170 arm64_preempt_schedule_irq+0xf0/0x18c el1_irq+0xe8/0x180 perf_event_exec+0x4d8/0x56c setup_new_exec+0x204/0x400 load_elf_binary+0x72c/0x18c0 search_binary_handler+0x13c/0x420 load_script+0x500/0x6c4 search_binary_handler+0x13c/0x420 exec_binprm+0x118/0x654 __do_execve_file+0x77c/0xba4 __arm64_compat_sys_execve+0x98/0xac el0_svc_common+0x1f8/0x5e0 el0_svc_compat_handler+0x84/0xb0 el0_svc_compat+0x10/0x50 The buggy address belongs to the variable: barrier_pkt+0x10/0x40 Memory state around the buggy address: ffffffd05b7d0f00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 ffffffd05b7d0f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffd05b7d1000: 00 00 00 00 00 00 fa fa fa fa fa fa 00 00 00 03 ^ ffffffd05b7d1080: fa fa fa fa 00 02 fa fa fa fa fa fa 03 fa fa fa ffffffd05b7d1100: fa fa fa fa 00 00 00 00 05 fa fa fa fa fa fa fa ================================================================== |
| CVE-2021-47345 | In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix rdma_resolve_route() memory leak Fix a memory leak when "mda_resolve_route() is called more than once on the same "rdma_cm_id". This is possible if cma_query_handler() triggers the RDMA_CM_EVENT_ROUTE_ERROR flow which puts the state machine back and allows rdma_resolve_route() to be called again. |
| CVE-2021-47344 | In the Linux kernel, the following vulnerability has been resolved: media: zr364xx: fix memory leak in zr364xx_start_readpipe syzbot reported memory leak in zr364xx driver. The problem was in non-freed urb in case of usb_submit_urb() fail. backtrace: [<ffffffff82baedf6>] kmalloc include/linux/slab.h:561 [inline] [<ffffffff82baedf6>] usb_alloc_urb+0x66/0xe0 drivers/usb/core/urb.c:74 [<ffffffff82f7cce8>] zr364xx_start_readpipe+0x78/0x130 drivers/media/usb/zr364xx/zr364xx.c:1022 [<ffffffff84251dfc>] zr364xx_board_init drivers/media/usb/zr364xx/zr364xx.c:1383 [inline] [<ffffffff84251dfc>] zr364xx_probe+0x6a3/0x851 drivers/media/usb/zr364xx/zr364xx.c:1516 [<ffffffff82bb6507>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff826018a9>] really_probe+0x159/0x500 drivers/base/dd.c:576 |
| CVE-2021-47343 | In the Linux kernel, the following vulnerability has been resolved: dm btree remove: assign new_root only when removal succeeds remove_raw() in dm_btree_remove() may fail due to IO read error (e.g. read the content of origin block fails during shadowing), and the value of shadow_spine::root is uninitialized, but the uninitialized value is still assign to new_root in the end of dm_btree_remove(). For dm-thin, the value of pmd->details_root or pmd->root will become an uninitialized value, so if trying to read details_info tree again out-of-bound memory may occur as showed below: general protection fault, probably for non-canonical address 0x3fdcb14c8d7520 CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6 Hardware name: QEMU Standard PC RIP: 0010:metadata_ll_load_ie+0x14/0x30 Call Trace: sm_metadata_count_is_more_than_one+0xb9/0xe0 dm_tm_shadow_block+0x52/0x1c0 shadow_step+0x59/0xf0 remove_raw+0xb2/0x170 dm_btree_remove+0xf4/0x1c0 dm_pool_delete_thin_device+0xc3/0x140 pool_message+0x218/0x2b0 target_message+0x251/0x290 ctl_ioctl+0x1c4/0x4d0 dm_ctl_ioctl+0xe/0x20 __x64_sys_ioctl+0x7b/0xb0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixing it by only assign new_root when removal succeeds |
| CVE-2021-47342 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix possible UAF when remounting r/o a mmp-protected file system After commit 618f003199c6 ("ext4: fix memory leak in ext4_fill_super"), after the file system is remounted read-only, there is a race where the kmmpd thread can exit, causing sbi->s_mmp_tsk to point at freed memory, which the call to ext4_stop_mmpd() can trip over. Fix this by only allowing kmmpd() to exit when it is stopped via ext4_stop_mmpd(). Bug-Report-Link: <[email protected]> |
| CVE-2021-47341 | In the Linux kernel, the following vulnerability has been resolved: KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio BUG: KASAN: use-after-free in kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183 Read of size 8 at addr ffff0000c03a2500 by task syz-executor083/4269 CPU: 5 PID: 4269 Comm: syz-executor083 Not tainted 5.10.0 #7 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2d0 arch/arm64/kernel/stacktrace.c:132 show_stack+0x28/0x34 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x164 lib/dump_stack.c:118 print_address_description+0x78/0x5c8 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x148/0x1e4 mm/kasan/report.c:562 check_memory_region_inline mm/kasan/generic.c:183 [inline] __asan_load8+0xb4/0xbc mm/kasan/generic.c:252 kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183 kvm_vm_ioctl+0xe30/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3755 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common arch/arm64/kernel/syscall.c:158 [inline] do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670 Allocated by task 4269: stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121 kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc+0xdc/0x120 mm/kasan/common.c:461 kasan_kmalloc+0xc/0x14 mm/kasan/common.c:475 kmem_cache_alloc_trace include/linux/slab.h:450 [inline] kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:664 [inline] kvm_vm_ioctl_register_coalesced_mmio+0x78/0x1cc arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:146 kvm_vm_ioctl+0x7e8/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3746 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common arch/arm64/kernel/syscall.c:158 [inline] do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670 Freed by task 4269: stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121 kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x38/0x6c mm/kasan/common.c:56 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:355 __kasan_slab_free+0x124/0x150 mm/kasan/common.c:422 kasan_slab_free+0x10/0x1c mm/kasan/common.c:431 slab_free_hook mm/slub.c:1544 [inline] slab_free_freelist_hook mm/slub.c:1577 [inline] slab_free mm/slub.c:3142 [inline] kfree+0x104/0x38c mm/slub.c:4124 coalesced_mmio_destructor+0x94/0xa4 arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:102 kvm_iodevice_destructor include/kvm/iodev.h:61 [inline] kvm_io_bus_unregister_dev+0x248/0x280 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:4374 kvm_vm_ioctl_unregister_coalesced_mmio+0x158/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:186 kvm_vm_ioctl+0xe30/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3755 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/sys ---truncated--- |
| CVE-2021-47340 | In the Linux kernel, the following vulnerability has been resolved: jfs: fix GPF in diFree Avoid passing inode with JFS_SBI(inode->i_sb)->ipimap == NULL to diFree()[1]. GFP will appear: struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap; struct inomap *imap = JFS_IP(ipimap)->i_imap; JFS_IP() will return invalid pointer when ipimap == NULL Call Trace: diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1] jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154 evict+0x2ed/0x750 fs/inode.c:578 iput_final fs/inode.c:1654 [inline] iput.part.0+0x3fe/0x820 fs/inode.c:1680 iput+0x58/0x70 fs/inode.c:1670 |
| CVE-2021-47339 | In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: explicitly clear ioctl input data As seen from a recent syzbot bug report, mistakes in the compat ioctl implementation can lead to uninitialized kernel stack data getting used as input for driver ioctl handlers. The reported bug is now fixed, but it's possible that other related bugs are still present or get added in the future. As the drivers need to check user input already, the possible impact is fairly low, but it might still cause an information leak. To be on the safe side, always clear the entire ioctl buffer before calling the conversion handler functions that are meant to initialize them. |
| CVE-2021-47338 | In the Linux kernel, the following vulnerability has been resolved: fbmem: Do not delete the mode that is still in use The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 |
| CVE-2021-47337 | In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix bad pointer dereference when ehandler kthread is invalid Commit 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") changed the allocation logic to call put_device() to perform host cleanup with the assumption that IDA removal and stopping the kthread would properly be performed in scsi_host_dev_release(). However, in the unlikely case that the error handler thread fails to spawn, shost->ehandler is set to ERR_PTR(-ENOMEM). The error handler cleanup code in scsi_host_dev_release() will call kthread_stop() if shost->ehandler != NULL which will always be the case whether the kthread was successfully spawned or not. In the case that it failed to spawn this has the nasty side effect of trying to dereference an invalid pointer when kthread_stop() is called. The following splat provides an example of this behavior in the wild: scsi host11: error handler thread failed to spawn, error = -4 Kernel attempted to read user page (10c) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x0000010c Faulting instruction address: 0xc00000000818e9a8 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvscsi(+) scsi_transport_srp dm_multipath dm_mirror dm_region hash dm_log dm_mod fuse overlay squashfs loop CPU: 12 PID: 274 Comm: systemd-udevd Not tainted 5.13.0-rc7 #1 NIP: c00000000818e9a8 LR: c0000000089846e8 CTR: 0000000000007ee8 REGS: c000000037d12ea0 TRAP: 0300 Not tainted (5.13.0-rc7) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28228228 XER: 20040001 CFAR: c0000000089846e4 DAR: 000000000000010c DSISR: 40000000 IRQMASK: 0 GPR00: c0000000089846e8 c000000037d13140 c000000009cc1100 fffffffffffffffc GPR04: 0000000000000001 0000000000000000 0000000000000000 c000000037dc0000 GPR08: 0000000000000000 c000000037dc0000 0000000000000001 00000000fffff7ff GPR12: 0000000000008000 c00000000a049000 c000000037d13d00 000000011134d5a0 GPR16: 0000000000001740 c0080000190d0000 c0080000190d1740 c000000009129288 GPR20: c000000037d13bc0 0000000000000001 c000000037d13bc0 c0080000190b7898 GPR24: c0080000190b7708 0000000000000000 c000000033bb2c48 0000000000000000 GPR28: c000000046b28280 0000000000000000 000000000000010c fffffffffffffffc NIP [c00000000818e9a8] kthread_stop+0x38/0x230 LR [c0000000089846e8] scsi_host_dev_release+0x98/0x160 Call Trace: [c000000033bb2c48] 0xc000000033bb2c48 (unreliable) [c0000000089846e8] scsi_host_dev_release+0x98/0x160 [c00000000891e960] device_release+0x60/0x100 [c0000000087e55c4] kobject_release+0x84/0x210 [c00000000891ec78] put_device+0x28/0x40 [c000000008984ea4] scsi_host_alloc+0x314/0x430 [c0080000190b38bc] ibmvscsi_probe+0x54/0xad0 [ibmvscsi] [c000000008110104] vio_bus_probe+0xa4/0x4b0 [c00000000892a860] really_probe+0x140/0x680 [c00000000892aefc] driver_probe_device+0x15c/0x200 [c00000000892b63c] device_driver_attach+0xcc/0xe0 [c00000000892b740] __driver_attach+0xf0/0x200 [c000000008926f28] bus_for_each_dev+0xa8/0x130 [c000000008929ce4] driver_attach+0x34/0x50 [c000000008928fc0] bus_add_driver+0x1b0/0x300 [c00000000892c798] driver_register+0x98/0x1a0 [c00000000810eb60] __vio_register_driver+0x80/0xe0 [c0080000190b4a30] ibmvscsi_module_init+0x9c/0xdc [ibmvscsi] [c0000000080121d0] do_one_initcall+0x60/0x2d0 [c000000008261abc] do_init_module+0x7c/0x320 [c000000008265700] load_module+0x2350/0x25b0 [c000000008265cb4] __do_sys_finit_module+0xd4/0x160 [c000000008031110] system_call_exception+0x150/0x2d0 [c00000000800d35c] system_call_common+0xec/0x278 Fix this be nulling shost->ehandler when the kthread fails to spawn. |
| CVE-2021-47336 | In the Linux kernel, the following vulnerability has been resolved: smackfs: restrict bytes count in smk_set_cipso() Oops, I failed to update subject line. From 07571157c91b98ce1a4aa70967531e64b78e8346 Mon Sep 17 00:00:00 2001 Date: Mon, 12 Apr 2021 22:25:06 +0900 Subject: [PATCH] smackfs: restrict bytes count in smk_set_cipso() Commit 7ef4c19d245f3dc2 ("smackfs: restrict bytes count in smackfs write functions") missed that count > SMK_CIPSOMAX check applies to only format == SMK_FIXED24_FMT case. |
| CVE-2021-47335 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid racing on fsync_entry_slab by multi filesystem instances As syzbot reported, there is an use-after-free issue during f2fs recovery: Use-after-free write at 0xffff88823bc16040 (in kfence-#10): kmem_cache_destroy+0x1f/0x120 mm/slab_common.c:486 f2fs_recover_fsync_data+0x75b0/0x8380 fs/f2fs/recovery.c:869 f2fs_fill_super+0x9393/0xa420 fs/f2fs/super.c:3945 mount_bdev+0x26c/0x3a0 fs/super.c:1367 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2905 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3235 do_mount fs/namespace.c:3248 [inline] __do_sys_mount fs/namespace.c:3456 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is multi f2fs filesystem instances can race on accessing global fsync_entry_slab pointer, result in use-after-free issue of slab cache, fixes to init/destroy this slab cache only once during module init/destroy procedure to avoid this issue. |
| CVE-2021-47334 | In the Linux kernel, the following vulnerability has been resolved: misc/libmasm/module: Fix two use after free in ibmasm_init_one In ibmasm_init_one, it calls ibmasm_init_remote_input_dev(). Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are allocated by input_allocate_device(), and assigned to sp->remote.mouse_dev and sp->remote.keybd_dev respectively. In the err_free_devices error branch of ibmasm_init_one, mouse_dev and keybd_dev are freed by input_free_device(), and return error. Then the execution runs into error_send_message error branch of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called to unregister the freed sp->remote.mouse_dev and sp->remote.keybd_dev. My patch add a "error_init_remote" label to handle the error of ibmasm_init_remote_input_dev(), to avoid the uaf bugs. |
| CVE-2021-47333 | In the Linux kernel, the following vulnerability has been resolved: misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge There is an issue with the ASPM(optional) capability checking function. A device might be attached to root complex directly, in this case, bus->self(bridge) will be NULL, thus priv->parent_pdev is NULL. Since alcor_pci_init_check_aspm(priv->parent_pdev) checks the PCI link's ASPM capability and populate parent_cap_off, which will be used later by alcor_pci_aspm_ctrl() to dynamically turn on/off device, what we can do here is to avoid checking the capability if we are on the root complex. This will make pdev_cap_off 0 and alcor_pci_aspm_ctrl() will simply return when bring called, effectively disable ASPM for the device. [ 1.246492] BUG: kernel NULL pointer dereference, address: 00000000000000c0 [ 1.248731] RIP: 0010:pci_read_config_byte+0x5/0x40 [ 1.253998] Call Trace: [ 1.254131] ? alcor_pci_find_cap_offset.isra.0+0x3a/0x100 [alcor_pci] [ 1.254476] alcor_pci_probe+0x169/0x2d5 [alcor_pci] |
| CVE-2021-47332 | In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Don't call free_pages_exact() with NULL address Unlike some other functions, we can't pass NULL pointer to free_pages_exact(). Add a proper NULL check for avoiding possible Oops. |
| CVE-2021-47331 | In the Linux kernel, the following vulnerability has been resolved: usb: common: usb-conn-gpio: fix NULL pointer dereference of charger When power on system with OTG cable, IDDIG's interrupt arises before the charger registration, it will cause a NULL pointer dereference, fix the issue by registering the power supply before requesting IDDIG/VBUS irq. |
| CVE-2021-47330 | In the Linux kernel, the following vulnerability has been resolved: tty: serial: 8250: serial_cs: Fix a memory leak in error handling path In the probe function, if the final 'serial_config()' fails, 'info' is leaking. Add a resource handling path to free this memory. |
| CVE-2021-47329 | In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix resource leak in case of probe failure The driver doesn't clean up all the allocated resources properly when scsi_add_host(), megasas_start_aen() function fails during the PCI device probe. Clean up all those resources. |
| CVE-2021-47328 | In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi: Fix conn use after free during resets If we haven't done a unbind target call we can race where iscsi_conn_teardown wakes up the EH thread and then frees the conn while those threads are still accessing the conn ehwait. We can only do one TMF per session so this just moves the TMF fields from the conn to the session. We can then rely on the iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call to remove the target and it's devices, and know after that point there is no device or scsi-ml callout trying to access the session. |
| CVE-2021-47327 | In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails arm_smmu_rpm_get() invokes pm_runtime_get_sync(), which increases the refcount of the "smmu" even though the return value is less than 0. The reference counting issue happens in some error handling paths of arm_smmu_rpm_get() in its caller functions. When arm_smmu_rpm_get() fails, the caller functions forget to decrease the refcount of "smmu" increased by arm_smmu_rpm_get(), causing a refcount leak. Fix this issue by calling pm_runtime_resume_and_get() instead of pm_runtime_get_sync() in arm_smmu_rpm_get(), which can keep the refcount balanced in case of failure. |
| CVE-2021-47325 | In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation The reference counting issue happens in several exception handling paths of arm_smmu_iova_to_phys_hard(). When those error scenarios occur, the function forgets to decrease the refcount of "smmu" increased by arm_smmu_rpm_get(), causing a refcount leak. Fix this issue by jumping to "out" label when those error scenarios occur. |
| CVE-2021-47324 | In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix possible use-after-free in wdt_startup() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. |
| CVE-2021-47323 | In the Linux kernel, the following vulnerability has been resolved: watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. |
| CVE-2021-47322 | In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT Fix an Oopsable condition in pnfs_mark_request_commit() when we're putting a set of writes on the commit list to reschedule them after a failed pNFS attempt. |
| CVE-2021-47321 | In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix possible use-after-free by calling del_timer_sync() This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. |
| CVE-2021-47320 | In the Linux kernel, the following vulnerability has been resolved: nfs: fix acl memory leak of posix_acl_create() When looking into another nfs xfstests report, I found acl and default_acl in nfs3_proc_create() and nfs3_proc_mknod() error paths are possibly leaked. Fix them in advance. |
| CVE-2021-47319 | In the Linux kernel, the following vulnerability has been resolved: virtio-blk: Fix memory leak among suspend/resume procedure The vblk->vqs should be freed before we call init_vqs() in virtblk_restore(). |
| CVE-2021-47318 | In the Linux kernel, the following vulnerability has been resolved: arch_topology: Avoid use-after-free for scale_freq_data Currently topology_scale_freq_tick() (which gets called from scheduler_tick()) may end up using a pointer to "struct scale_freq_data", which was previously cleared by topology_clear_scale_freq_source(), as there is no protection in place here. The users of topology_clear_scale_freq_source() though needs a guarantee that the previously cleared scale_freq_data isn't used anymore, so they can free the related resources. Since topology_scale_freq_tick() is called from scheduler tick, we don't want to add locking in there. Use the RCU update mechanism instead (which is already used by the scheduler's utilization update path) to guarantee race free updates here. synchronize_rcu() makes sure that all RCU critical sections that started before it is called, will finish before it returns. And so the callers of topology_clear_scale_freq_source() don't need to worry about their callback getting called anymore. |
| CVE-2021-47317 | In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf: Fix detecting BPF atomic instructions Commit 91c960b0056672 ("bpf: Rename BPF_XADD and prepare to encode other atomics in .imm") converted BPF_XADD to BPF_ATOMIC and added a way to distinguish instructions based on the immediate field. Existing JIT implementations were updated to check for the immediate field and to reject programs utilizing anything more than BPF_ADD (such as BPF_FETCH) in the immediate field. However, the check added to powerpc64 JIT did not look at the correct BPF instruction. Due to this, such programs would be accepted and incorrectly JIT'ed resulting in soft lockups, as seen with the atomic bounds test. Fix this by looking at the correct immediate value. |
| CVE-2021-47316 | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix NULL dereference in nfs3svc_encode_getaclres In error cases the dentry may be NULL. Before 20798dfe249a, the encoder also checked dentry and d_really_is_positive(dentry), but that looks like overkill to me--zero status should be enough to guarantee a positive dentry. This isn't the first time we've seen an error-case NULL dereference hidden in the initialization of a local variable in an xdr encoder. But I went back through the other recent rewrites and didn't spot any similar bugs. |
| CVE-2021-47315 | In the Linux kernel, the following vulnerability has been resolved: memory: fsl_ifc: fix leak of IO mapping on probe failure On probe error the driver should unmap the IO memory. Smatch reports: drivers/memory/fsl_ifc.c:298 fsl_ifc_ctrl_probe() warn: 'fsl_ifc_ctrl_dev->gregs' not released on lines: 298. |
| CVE-2021-47314 | In the Linux kernel, the following vulnerability has been resolved: memory: fsl_ifc: fix leak of private memory on probe failure On probe error the driver should free the memory allocated for private structure. Fix this by using resource-managed allocation. |
| CVE-2021-47313 | In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Fix potential memleak in cppc_cpufreq_cpu_init It's a classic example of memleak, we allocate something, we fail and never free the resources. Make sure we free all resources on policy ->init() failures. |
| CVE-2021-47312 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix dereference of null pointer flow In the case where chain->flags & NFT_CHAIN_HW_OFFLOAD is false then nft_flow_rule_create is not called and flow is NULL. The subsequent error handling execution via label err_destroy_flow_rule will lead to a null pointer dereference on flow when calling nft_flow_rule_destroy. Since the error path to err_destroy_flow_rule has to cater for null and non-null flows, only call nft_flow_rule_destroy if flow is non-null to fix this issue. Addresses-Coverity: ("Explicity null dereference") |
| CVE-2021-47311 | In the Linux kernel, the following vulnerability has been resolved: net: qcom/emac: fix UAF in emac_remove adpt is netdev private data and it cannot be used after free_netdev() call. Using adpt after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. |
| CVE-2021-47310 | In the Linux kernel, the following vulnerability has been resolved: net: ti: fix UAF in tlan_remove_one priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. |
| CVE-2021-47309 | In the Linux kernel, the following vulnerability has been resolved: net: validate lwtstate->data before returning from skb_tunnel_info() skb_tunnel_info() returns pointer of lwtstate->data as ip_tunnel_info type without validation. lwtstate->data can have various types such as mpls_iptunnel_encap, etc and these are not compatible. So skb_tunnel_info() should validate before returning that pointer. Splat looks like: BUG: KASAN: slab-out-of-bounds in vxlan_get_route+0x418/0x4b0 [vxlan] Read of size 2 at addr ffff888106ec2698 by task ping/811 CPU: 1 PID: 811 Comm: ping Not tainted 5.13.0+ #1195 Call Trace: dump_stack_lvl+0x56/0x7b print_address_description.constprop.8.cold.13+0x13/0x2ee ? vxlan_get_route+0x418/0x4b0 [vxlan] ? vxlan_get_route+0x418/0x4b0 [vxlan] kasan_report.cold.14+0x83/0xdf ? vxlan_get_route+0x418/0x4b0 [vxlan] vxlan_get_route+0x418/0x4b0 [vxlan] [ ... ] vxlan_xmit_one+0x148b/0x32b0 [vxlan] [ ... ] vxlan_xmit+0x25c5/0x4780 [vxlan] [ ... ] dev_hard_start_xmit+0x1ae/0x6e0 __dev_queue_xmit+0x1f39/0x31a0 [ ... ] neigh_xmit+0x2f9/0x940 mpls_xmit+0x911/0x1600 [mpls_iptunnel] lwtunnel_xmit+0x18f/0x450 ip_finish_output2+0x867/0x2040 [ ... ] |
| CVE-2021-47308 | In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix array index out of bound exception Fix array index out of bound exception in fc_rport_prli_resp(). |
| CVE-2021-47307 | In the Linux kernel, the following vulnerability has been resolved: cifs: prevent NULL deref in cifs_compose_mount_options() The optional @ref parameter might contain an NULL node_name, so prevent dereferencing it in cifs_compose_mount_options(). Addresses-Coverity: 1476408 ("Explicit null dereferenced") |
| CVE-2021-47306 | In the Linux kernel, the following vulnerability has been resolved: net: fddi: fix UAF in fza_probe fp is netdev private data and it cannot be used after free_netdev() call. Using fp after free_netdev() can cause UAF bug. Fix it by moving free_netdev() after error message. TURBOchannel adapter") |
| CVE-2021-47305 | In the Linux kernel, the following vulnerability has been resolved: dma-buf/sync_file: Don't leak fences on merge failure Each add_fence() call does a dma_fence_get() on the relevant fence. In the error path, we weren't calling dma_fence_put() so all those fences got leaked. Also, in the krealloc_array failure case, we weren't freeing the fences array. Instead, ensure that i and fences are always zero-initialized and dma_fence_put() all the fences and kfree(fences) on every error path. |
| CVE-2021-47304 | In the Linux kernel, the following vulnerability has been resolved: tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized This commit fixes a bug (found by syzkaller) that could cause spurious double-initializations for congestion control modules, which could cause memory leaks or other problems for congestion control modules (like CDG) that allocate memory in their init functions. The buggy scenario constructed by syzkaller was something like: (1) create a TCP socket (2) initiate a TFO connect via sendto() (3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION), which calls: tcp_set_congestion_control() -> tcp_reinit_congestion_control() -> tcp_init_congestion_control() (4) receive ACK, connection is established, call tcp_init_transfer(), set icsk_ca_initialized=0 (without first calling cc->release()), call tcp_init_congestion_control() again. Note that in this sequence tcp_init_congestion_control() is called twice without a cc->release() call in between. Thus, for CC modules that allocate memory in their init() function, e.g, CDG, a memory leak may occur. The syzkaller tool managed to find a reproducer that triggered such a leak in CDG. The bug was introduced when that commit 8919a9b31eb4 ("tcp: Only init congestion control if not initialized already") introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in tcp_init_transfer(), missing the possibility for a sequence like the one above, where a process could call setsockopt(TCP_CONGESTION) in state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()), which would call tcp_init_congestion_control(). It did not intend to reset any initialization that the user had already explicitly made; it just missed the possibility of that particular sequence (which syzkaller managed to find). |
| CVE-2021-47303 | In the Linux kernel, the following vulnerability has been resolved: bpf: Track subprog poke descriptors correctly and fix use-after-free Subprograms are calling map_poke_track(), but on program release there is no hook to call map_poke_untrack(). However, on program release, the aux memory (and poke descriptor table) is freed even though we still have a reference to it in the element list of the map aux data. When we run map_poke_run(), we then end up accessing free'd memory, triggering KASAN in prog_array_map_poke_run(): [...] [ 402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e [ 402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337 [ 402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G I 5.12.0+ #399 [ 402.824715] Call Trace: [ 402.824719] dump_stack+0x93/0xc2 [ 402.824727] print_address_description.constprop.0+0x1a/0x140 [ 402.824736] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824740] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824744] kasan_report.cold+0x7c/0xd8 [ 402.824752] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824757] prog_array_map_poke_run+0xc2/0x34e [ 402.824765] bpf_fd_array_map_update_elem+0x124/0x1a0 [...] The elements concerned are walked as follows: for (i = 0; i < elem->aux->size_poke_tab; i++) { poke = &elem->aux->poke_tab[i]; [...] The access to size_poke_tab is a 4 byte read, verified by checking offsets in the KASAN dump: [ 402.825004] The buggy address belongs to the object at ffff8881905a7800 which belongs to the cache kmalloc-1k of size 1024 [ 402.825008] The buggy address is located 320 bytes inside of 1024-byte region [ffff8881905a7800, ffff8881905a7c00) The pahole output of bpf_prog_aux: struct bpf_prog_aux { [...] /* --- cacheline 5 boundary (320 bytes) --- */ u32 size_poke_tab; /* 320 4 */ [...] In general, subprograms do not necessarily manage their own data structures. For example, BTF func_info and linfo are just pointers to the main program structure. This allows reference counting and cleanup to be done on the latter which simplifies their management a bit. The aux->poke_tab struct, however, did not follow this logic. The initial proposed fix for this use-after-free bug further embedded poke data tracking into the subprogram with proper reference counting. However, Daniel and Alexei questioned why we were treating these objects special; I agree, its unnecessary. The fix here removes the per subprogram poke table allocation and map tracking and instead simply points the aux->poke_tab pointer at the main programs poke table. This way, map tracking is simplified to the main program and we do not need to manage them per subprogram. This also means, bpf_prog_free_deferred(), which unwinds the program reference counting and kfrees objects, needs to ensure that we don't try to double free the poke_tab when free'ing the subprog structures. This is easily solved by NULL'ing the poke_tab pointer. The second detail is to ensure that per subprogram JIT logic only does fixups on poke_tab[] entries it owns. To do this, we add a pointer in the poke structure to point at the subprogram value so JITs can easily check while walking the poke_tab structure if the current entry belongs to the current program. The aux pointer is stable and therefore suitable for such comparison. On the jit_subprogs() error path, we omit cleaning up the poke->aux field because these are only ever referenced from the JIT side, but on error we will never make it to the JIT, so its fine to leave them dangling. Removing these pointers would complicate the error path for no reason. However, we do need to untrack all poke descriptors from the main program as otherwise they could race with the freeing of JIT memory from the subprograms. Lastly, a748c6975dea3 ("bpf: propagate poke des ---truncated--- |
| CVE-2021-47302 | In the Linux kernel, the following vulnerability has been resolved: igc: Fix use-after-free error during reset Cleans the next descriptor to watch (next_to_watch) when cleaning the TX ring. Failure to do so can cause invalid memory accesses. If igc_poll() runs while the controller is being reset this can lead to the driver try to free a skb that was already freed. Log message: [ 101.525242] refcount_t: underflow; use-after-free. [ 101.525251] WARNING: CPU: 1 PID: 646 at lib/refcount.c:28 refcount_warn_saturate+0xab/0xf0 [ 101.525259] Modules linked in: sch_etf(E) sch_mqprio(E) rfkill(E) intel_rapl_msr(E) intel_rapl_common(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) binfmt_misc(E) kvm_intel(E) kvm(E) irqbypass(E) crc32_pclmul(E) ghash_clmulni_intel(E) aesni_intel(E) mei_wdt(E) libaes(E) crypto_simd(E) cryptd(E) glue_helper(E) snd_hda_codec_hdmi(E) rapl(E) intel_cstate(E) snd_hda_intel(E) snd_intel_dspcfg(E) sg(E) soundwire_intel(E) intel_uncore(E) at24(E) soundwire_generic_allocation(E) iTCO_wdt(E) soundwire_cadence(E) intel_pmc_bxt(E) serio_raw(E) snd_hda_codec(E) iTCO_vendor_support(E) watchdog(E) snd_hda_core(E) snd_hwdep(E) snd_soc_core(E) snd_compress(E) snd_pcsp(E) soundwire_bus(E) snd_pcm(E) evdev(E) snd_timer(E) mei_me(E) snd(E) soundcore(E) mei(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) sd_mod(E) t10_pi(E) crc_t10dif(E) crct10dif_generic(E) i915(E) ahci(E) libahci(E) ehci_pci(E) igb(E) xhci_pci(E) ehci_hcd(E) [ 101.525303] drm_kms_helper(E) dca(E) xhci_hcd(E) libata(E) crct10dif_pclmul(E) cec(E) crct10dif_common(E) tsn(E) igc(E) e1000e(E) ptp(E) i2c_i801(E) crc32c_intel(E) psmouse(E) i2c_algo_bit(E) i2c_smbus(E) scsi_mod(E) lpc_ich(E) pps_core(E) usbcore(E) drm(E) button(E) video(E) [ 101.525318] CPU: 1 PID: 646 Comm: irq/37-enp7s0-T Tainted: G E 5.10.30-rt37-tsn1-rt-ipipe #ipipe [ 101.525320] Hardware name: SIEMENS AG SIMATIC IPC427D/A5E31233588, BIOS V17.02.09 03/31/2017 [ 101.525322] RIP: 0010:refcount_warn_saturate+0xab/0xf0 [ 101.525325] Code: 05 31 48 44 01 01 e8 f0 c6 42 00 0f 0b c3 80 3d 1f 48 44 01 00 75 90 48 c7 c7 78 a8 f3 a6 c6 05 0f 48 44 01 01 e8 d1 c6 42 00 <0f> 0b c3 80 3d fe 47 44 01 00 0f 85 6d ff ff ff 48 c7 c7 d0 a8 f3 [ 101.525327] RSP: 0018:ffffbdedc0917cb8 EFLAGS: 00010286 [ 101.525329] RAX: 0000000000000000 RBX: ffff98fd6becbf40 RCX: 0000000000000001 [ 101.525330] RDX: 0000000000000001 RSI: ffffffffa6f2700c RDI: 00000000ffffffff [ 101.525332] RBP: ffff98fd6becc14c R08: ffffffffa7463d00 R09: ffffbdedc0917c50 [ 101.525333] R10: ffffffffa74c3578 R11: 0000000000000034 R12: 00000000ffffff00 [ 101.525335] R13: ffff98fd6b0b1000 R14: 0000000000000039 R15: ffff98fd6be35c40 [ 101.525337] FS: 0000000000000000(0000) GS:ffff98fd6e240000(0000) knlGS:0000000000000000 [ 101.525339] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.525341] CR2: 00007f34135a3a70 CR3: 0000000150210003 CR4: 00000000001706e0 [ 101.525343] Call Trace: [ 101.525346] sock_wfree+0x9c/0xa0 [ 101.525353] unix_destruct_scm+0x7b/0xa0 [ 101.525358] skb_release_head_state+0x40/0x90 [ 101.525362] skb_release_all+0xe/0x30 [ 101.525364] napi_consume_skb+0x57/0x160 [ 101.525367] igc_poll+0xb7/0xc80 [igc] [ 101.525376] ? sched_clock+0x5/0x10 [ 101.525381] ? sched_clock_cpu+0xe/0x100 [ 101.525385] net_rx_action+0x14c/0x410 [ 101.525388] __do_softirq+0xe9/0x2f4 [ 101.525391] __local_bh_enable_ip+0xe3/0x110 [ 101.525395] ? irq_finalize_oneshot.part.47+0xe0/0xe0 [ 101.525398] irq_forced_thread_fn+0x6a/0x80 [ 101.525401] irq_thread+0xe8/0x180 [ 101.525403] ? wake_threads_waitq+0x30/0x30 [ 101.525406] ? irq_thread_check_affinity+0xd0/0xd0 [ 101.525408] kthread+0x183/0x1a0 [ 101.525412] ? kthread_park+0x80/0x80 [ 101.525415] ret_from_fork+0x22/0x30 |
| CVE-2021-47301 | In the Linux kernel, the following vulnerability has been resolved: igb: Fix use-after-free error during reset Cleans the next descriptor to watch (next_to_watch) when cleaning the TX ring. Failure to do so can cause invalid memory accesses. If igb_poll() runs while the controller is reset this can lead to the driver try to free a skb that was already freed. (The crash is harder to reproduce with the igb driver, but the same potential problem exists as the code is identical to igc) |
| CVE-2021-47300 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tail_call_reachable rejection for interpreter when jit failed During testing of f263a81451c1 ("bpf: Track subprog poke descriptors correctly and fix use-after-free") under various failure conditions, for example, when jit_subprogs() fails and tries to clean up the program to be run under the interpreter, we ran into the following freeze: [...] #127/8 tailcall_bpf2bpf_3:FAIL [...] [ 92.041251] BUG: KASAN: slab-out-of-bounds in ___bpf_prog_run+0x1b9d/0x2e20 [ 92.042408] Read of size 8 at addr ffff88800da67f68 by task test_progs/682 [ 92.043707] [ 92.044030] CPU: 1 PID: 682 Comm: test_progs Tainted: G O 5.13.0-53301-ge6c08cb33a30-dirty #87 [ 92.045542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 92.046785] Call Trace: [ 92.047171] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.047773] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.048389] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.049019] ? ktime_get+0x117/0x130 [...] // few hundred [similar] lines more [ 92.659025] ? ktime_get+0x117/0x130 [ 92.659845] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.660738] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.661528] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.662378] ? print_usage_bug+0x50/0x50 [ 92.663221] ? print_usage_bug+0x50/0x50 [ 92.664077] ? bpf_ksym_find+0x9c/0xe0 [ 92.664887] ? ktime_get+0x117/0x130 [ 92.665624] ? kernel_text_address+0xf5/0x100 [ 92.666529] ? __kernel_text_address+0xe/0x30 [ 92.667725] ? unwind_get_return_address+0x2f/0x50 [ 92.668854] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.670185] ? ktime_get+0x117/0x130 [ 92.671130] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.672020] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.672860] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.675159] ? ktime_get+0x117/0x130 [ 92.677074] ? lock_is_held_type+0xd5/0x130 [ 92.678662] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.680046] ? ktime_get+0x117/0x130 [ 92.681285] ? __bpf_prog_run32+0x6b/0x90 [ 92.682601] ? __bpf_prog_run64+0x90/0x90 [ 92.683636] ? lock_downgrade+0x370/0x370 [ 92.684647] ? mark_held_locks+0x44/0x90 [ 92.685652] ? ktime_get+0x117/0x130 [ 92.686752] ? lockdep_hardirqs_on+0x79/0x100 [ 92.688004] ? ktime_get+0x117/0x130 [ 92.688573] ? __cant_migrate+0x2b/0x80 [ 92.689192] ? bpf_test_run+0x2f4/0x510 [ 92.689869] ? bpf_test_timer_continue+0x1c0/0x1c0 [ 92.690856] ? rcu_read_lock_bh_held+0x90/0x90 [ 92.691506] ? __kasan_slab_alloc+0x61/0x80 [ 92.692128] ? eth_type_trans+0x128/0x240 [ 92.692737] ? __build_skb+0x46/0x50 [ 92.693252] ? bpf_prog_test_run_skb+0x65e/0xc50 [ 92.693954] ? bpf_prog_test_run_raw_tp+0x2d0/0x2d0 [ 92.694639] ? __fget_light+0xa1/0x100 [ 92.695162] ? bpf_prog_inc+0x23/0x30 [ 92.695685] ? __sys_bpf+0xb40/0x2c80 [ 92.696324] ? bpf_link_get_from_fd+0x90/0x90 [ 92.697150] ? mark_held_locks+0x24/0x90 [ 92.698007] ? lockdep_hardirqs_on_prepare+0x124/0x220 [ 92.699045] ? finish_task_switch+0xe6/0x370 [ 92.700072] ? lockdep_hardirqs_on+0x79/0x100 [ 92.701233] ? finish_task_switch+0x11d/0x370 [ 92.702264] ? __switch_to+0x2c0/0x740 [ 92.703148] ? mark_held_locks+0x24/0x90 [ 92.704155] ? __x64_sys_bpf+0x45/0x50 [ 92.705146] ? do_syscall_64+0x35/0x80 [ 92.706953] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [...] Turns out that the program rejection from e411901c0b77 ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") is buggy since env->prog->aux->tail_call_reachable is never true. Commit ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") added a tracker into check_max_stack_depth() which propagates the tail_call_reachable condition throughout the subprograms. This info is then assigned to the subprogram's ---truncated--- |
| CVE-2021-47299 | In the Linux kernel, the following vulnerability has been resolved: xdp, net: Fix use-after-free in bpf_xdp_link_release The problem occurs between dev_get_by_index() and dev_xdp_attach_link(). At this point, dev_xdp_uninstall() is called. Then xdp link will not be detached automatically when dev is released. But link->dev already points to dev, when xdp link is released, dev will still be accessed, but dev has been released. dev_get_by_index() | link->dev = dev | | rtnl_lock() | unregister_netdevice_many() | dev_xdp_uninstall() | rtnl_unlock() rtnl_lock(); | dev_xdp_attach_link() | rtnl_unlock(); | | netdev_run_todo() // dev released bpf_xdp_link_release() | /* access dev. | use-after-free */ | [ 45.966867] BUG: KASAN: use-after-free in bpf_xdp_link_release+0x3b8/0x3d0 [ 45.967619] Read of size 8 at addr ffff00000f9980c8 by task a.out/732 [ 45.968297] [ 45.968502] CPU: 1 PID: 732 Comm: a.out Not tainted 5.13.0+ #22 [ 45.969222] Hardware name: linux,dummy-virt (DT) [ 45.969795] Call trace: [ 45.970106] dump_backtrace+0x0/0x4c8 [ 45.970564] show_stack+0x30/0x40 [ 45.970981] dump_stack_lvl+0x120/0x18c [ 45.971470] print_address_description.constprop.0+0x74/0x30c [ 45.972182] kasan_report+0x1e8/0x200 [ 45.972659] __asan_report_load8_noabort+0x2c/0x50 [ 45.973273] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.973834] bpf_link_free+0xd0/0x188 [ 45.974315] bpf_link_put+0x1d0/0x218 [ 45.974790] bpf_link_release+0x3c/0x58 [ 45.975291] __fput+0x20c/0x7e8 [ 45.975706] ____fput+0x24/0x30 [ 45.976117] task_work_run+0x104/0x258 [ 45.976609] do_notify_resume+0x894/0xaf8 [ 45.977121] work_pending+0xc/0x328 [ 45.977575] [ 45.977775] The buggy address belongs to the page: [ 45.978369] page:fffffc00003e6600 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4f998 [ 45.979522] flags: 0x7fffe0000000000(node=0|zone=0|lastcpupid=0x3ffff) [ 45.980349] raw: 07fffe0000000000 fffffc00003e6708 ffff0000dac3c010 0000000000000000 [ 45.981309] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 45.982259] page dumped because: kasan: bad access detected [ 45.982948] [ 45.983153] Memory state around the buggy address: [ 45.983753] ffff00000f997f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.984645] ffff00000f998000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.985533] >ffff00000f998080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.986419] ^ [ 45.987112] ffff00000f998100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988006] ffff00000f998180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988895] ================================================================== [ 45.989773] Disabling lock debugging due to kernel taint [ 45.990552] Kernel panic - not syncing: panic_on_warn set ... [ 45.991166] CPU: 1 PID: 732 Comm: a.out Tainted: G B 5.13.0+ #22 [ 45.991929] Hardware name: linux,dummy-virt (DT) [ 45.992448] Call trace: [ 45.992753] dump_backtrace+0x0/0x4c8 [ 45.993208] show_stack+0x30/0x40 [ 45.993627] dump_stack_lvl+0x120/0x18c [ 45.994113] dump_stack+0x1c/0x34 [ 45.994530] panic+0x3a4/0x7d8 [ 45.994930] end_report+0x194/0x198 [ 45.995380] kasan_report+0x134/0x200 [ 45.995850] __asan_report_load8_noabort+0x2c/0x50 [ 45.996453] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.997007] bpf_link_free+0xd0/0x188 [ 45.997474] bpf_link_put+0x1d0/0x218 [ 45.997942] bpf_link_release+0x3c/0x58 [ 45.998429] __fput+0x20c/0x7e8 [ 45.998833] ____fput+0x24/0x30 [ 45.999247] task_work_run+0x104/0x258 [ 45.999731] do_notify_resume+0x894/0xaf8 [ 46.000236] work_pending ---truncated--- |
| CVE-2021-47298 | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix potential memory leak on unlikely error case If skb_linearize is needed and fails we could leak a msg on the error handling. To fix ensure we kfree the msg block before returning error. Found during code review. |
| CVE-2021-47297 | In the Linux kernel, the following vulnerability has been resolved: net: fix uninit-value in caif_seqpkt_sendmsg When nr_segs equal to zero in iovec_from_user, the object msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg which is defined in ___sys_sendmsg. So we cann't just judge msg->msg_iter.iov->base directlly. We can use nr_segs to judge msg in caif_seqpkt_sendmsg whether has data buffers. ===================================================== BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343 ___sys_sendmsg net/socket.c:2397 [inline] __sys_sendmmsg+0x808/0xc90 net/socket.c:2480 __compat_sys_sendmmsg net/compat.c:656 [inline] |
| CVE-2021-47296 | In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak vcpu_put is not called if the user copy fails. This can result in preempt notifier corruption and crashes, among other issues. |
| CVE-2021-47295 | In the Linux kernel, the following vulnerability has been resolved: net: sched: fix memory leak in tcindex_partial_destroy_work Syzbot reported memory leak in tcindex_set_parms(). The problem was in non-freed perfect hash in tcindex_partial_destroy_work(). In tcindex_set_parms() new tcindex_data is allocated and some fields from old one are copied to new one, but not the perfect hash. Since tcindex_partial_destroy_work() is the destroy function for old tcindex_data, we need to free perfect hash to avoid memory leak. |
| CVE-2021-47294 | In the Linux kernel, the following vulnerability has been resolved: netrom: Decrease sock refcount when sock timers expire Commit 63346650c1a9 ("netrom: switch to sock timer API") switched to use sock timer API. It replaces mod_timer() by sk_reset_timer(), and del_timer() by sk_stop_timer(). Function sk_reset_timer() will increase the refcount of sock if it is called on an inactive timer, hence, in case the timer expires, we need to decrease the refcount ourselves in the handler, otherwise, the sock refcount will be unbalanced and the sock will never be freed. |
| CVE-2021-47293 | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: Skip non-Ethernet packets Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2 protocol, which is not always the case. As an example, for CAN devices: $ ip link add dev vcan0 type vcan $ ip link set up vcan0 $ tc qdisc add dev vcan0 root handle 1: htb $ tc filter add dev vcan0 parent 1: protocol ip prio 10 \ matchall action skbmod swap mac Doing the above silently corrupts all the packets. Do not perform skbmod actions for non-Ethernet packets. |
| CVE-2021-47292 | In the Linux kernel, the following vulnerability has been resolved: io_uring: fix memleak in io_init_wq_offload() I got memory leak report when doing fuzz test: BUG: memory leak unreferenced object 0xffff888107310a80 (size 96): comm "syz-executor.6", pid 4610, jiffies 4295140240 (age 20.135s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... backtrace: [<000000001974933b>] kmalloc include/linux/slab.h:591 [inline] [<000000001974933b>] kzalloc include/linux/slab.h:721 [inline] [<000000001974933b>] io_init_wq_offload fs/io_uring.c:7920 [inline] [<000000001974933b>] io_uring_alloc_task_context+0x466/0x640 fs/io_uring.c:7955 [<0000000039d0800d>] __io_uring_add_tctx_node+0x256/0x360 fs/io_uring.c:9016 [<000000008482e78c>] io_uring_add_tctx_node fs/io_uring.c:9052 [inline] [<000000008482e78c>] __do_sys_io_uring_enter fs/io_uring.c:9354 [inline] [<000000008482e78c>] __se_sys_io_uring_enter fs/io_uring.c:9301 [inline] [<000000008482e78c>] __x64_sys_io_uring_enter+0xabc/0xc20 fs/io_uring.c:9301 [<00000000b875f18f>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000b875f18f>] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 [<000000006b0a8484>] entry_SYSCALL_64_after_hwframe+0x44/0xae CPU0 CPU1 io_uring_enter io_uring_enter io_uring_add_tctx_node io_uring_add_tctx_node __io_uring_add_tctx_node __io_uring_add_tctx_node io_uring_alloc_task_context io_uring_alloc_task_context io_init_wq_offload io_init_wq_offload hash = kzalloc hash = kzalloc ctx->hash_map = hash ctx->hash_map = hash <- one of the hash is leaked When calling io_uring_enter() in parallel, the 'hash_map' will be leaked, add uring_lock to protect 'hash_map'. |
| CVE-2021-47291 | In the Linux kernel, the following vulnerability has been resolved: ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions While running the self-tests on a KASAN enabled kernel, I observed a slab-out-of-bounds splat very similar to the one reported in commit 821bbf79fe46 ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions"). We additionally need to take care of fib6_metrics initialization failure when the caller provides an nh. The fix is similar, explicitly free the route instead of calling fib6_info_release on a half-initialized object. |
| CVE-2021-47290 | In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix NULL dereference on XCOPY completion CPU affinity control added with commit 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") makes target_complete_cmd() queue work on a CPU based on se_tpg->se_tpg_wwn->cmd_compl_affinity state. LIO's EXTENDED COPY worker is a special case in that read/write cmds are dispatched using the global xcopy_pt_tpg, which carries a NULL se_tpg_wwn pointer following initialization in target_xcopy_setup_pt(). The NULL xcopy_pt_tpg->se_tpg_wwn pointer is dereferenced on completion of any EXTENDED COPY initiated read/write cmds. E.g using the libiscsi SCSI.ExtendedCopy.Simple test: BUG: kernel NULL pointer dereference, address: 00000000000001a8 RIP: 0010:target_complete_cmd+0x9d/0x130 [target_core_mod] Call Trace: fd_execute_rw+0x148/0x42a [target_core_file] ? __dynamic_pr_debug+0xa7/0xe0 ? target_check_reservation+0x5b/0x940 [target_core_mod] __target_execute_cmd+0x1e/0x90 [target_core_mod] transport_generic_new_cmd+0x17c/0x330 [target_core_mod] target_xcopy_issue_pt_cmd+0x9/0x60 [target_core_mod] target_xcopy_read_source.isra.7+0x10b/0x1b0 [target_core_mod] ? target_check_fua+0x40/0x40 [target_core_mod] ? transport_complete_task_attr+0x130/0x130 [target_core_mod] target_xcopy_do_work+0x61f/0xc00 [target_core_mod] This fix makes target_complete_cmd() queue work on se_cmd->cpuid if se_tpg_wwn is NULL. |
| CVE-2021-47289 | In the Linux kernel, the following vulnerability has been resolved: ACPI: fix NULL pointer dereference Commit 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer that was possibly NULL. That fails miserably, because that helper inline function is not set up to handle that case. Just make acpi_dev_put() silently accept a NULL pointer, rather than calling down to put_device() with an invalid offset off that NULL pointer. |
| CVE-2021-47288 | In the Linux kernel, the following vulnerability has been resolved: media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf() Fix an 11-year old bug in ngene_command_config_free_buf() while addressing the following warnings caught with -Warray-bounds: arch/alpha/include/asm/string.h:22:16: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] The problem is that the original code is trying to copy 6 bytes of data into a one-byte size member _config_ of the wrong structue FW_CONFIGURE_BUFFERS, in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &com.cmd.ConfigureBuffers.config. It seems that the right structure is FW_CONFIGURE_FREE_BUFFERS, instead, because it contains 6 more members apart from the header _hdr_. Also, the name of the function ngene_command_config_free_buf() suggests that the actual intention is to ConfigureFreeBuffers, instead of ConfigureBuffers (which takes place in the function ngene_command_config_buf(), above). Fix this by enclosing those 6 members of struct FW_CONFIGURE_FREE_BUFFERS into new struct config, and use &com.cmd.ConfigureFreeBuffers.config as the destination address, instead of &com.cmd.ConfigureBuffers.config, when calling memcpy(). This also helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). |
| CVE-2021-47287 | In the Linux kernel, the following vulnerability has been resolved: driver core: auxiliary bus: Fix memory leak when driver_register() fail If driver_register() returns with error we need to free the memory allocated for auxdrv->driver.name before returning from __auxiliary_driver_register() |
| CVE-2021-47286 | In the Linux kernel, the following vulnerability has been resolved: bus: mhi: core: Validate channel ID when processing command completions MHI reads the channel ID from the event ring element sent by the device which can be any value between 0 and 255. In order to prevent any out of bound accesses, add a check against the maximum number of channels supported by the controller and those channels not configured yet so as to skip processing of that event ring element. |
| CVE-2021-47284 | In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: netjet: Fix crash in nj_probe: 'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested. Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'. The KASAN's log reveals it: [ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826 free_irq+0x100/0x480 [ 3.355112 ] Modules linked in: [ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.356552 ] RIP: 0010:free_irq+0x100/0x480 [ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4: 00000000000006f0 [ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.362175 ] Call Trace: [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ... [ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.362175 ] Call Trace: [ 3.362175 ] dump_stack+0xba/0xf5 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] panic+0x15a/0x3f2 [ 3.362175 ] ? __warn+0xf2/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] __warn+0x108/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] report_bug+0x119/0x1c0 [ 3.362175 ] handle_bug+0x3b/0x80 [ 3.362175 ] exc_invalid_op+0x18/0x70 [ 3.362175 ] asm_exc_invalid_op+0x12/0x20 [ 3.362175 ] RIP: 0010:free_irq+0x100 ---truncated--- |
| CVE-2021-47283 | In the Linux kernel, the following vulnerability has been resolved: net:sfc: fix non-freed irq in legacy irq mode SFC driver can be configured via modparam to work using MSI-X, MSI or legacy IRQ interrupts. In the last one, the interrupt was not properly released on module remove. It was not freed because the flag irqs_hooked was not set during initialization in the case of using legacy IRQ. Example of (trimmed) trace during module remove without this fix: remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1' WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170 ...trimmed... Call Trace: unregister_irq_proc+0xe3/0x100 free_desc+0x29/0x70 irq_free_descs+0x47/0x70 mp_unmap_irq+0x58/0x60 acpi_unregister_gsi_ioapic+0x2a/0x40 acpi_pci_irq_disable+0x78/0xb0 pci_disable_device+0xd1/0x100 efx_pci_remove+0xa1/0x1e0 [sfc] pci_device_remove+0x38/0xa0 __device_release_driver+0x177/0x230 driver_detach+0xcb/0x110 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x2a/0xb0 efx_exit_module+0x24/0xf40 [sfc] __do_sys_delete_module.constprop.0+0x171/0x280 ? exit_to_user_mode_prepare+0x83/0x1d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9f9385800b ...trimmed... |
| CVE-2021-47282 | In the Linux kernel, the following vulnerability has been resolved: spi: bcm2835: Fix out-of-bounds access with more than 4 slaves Commit 571e31fa60b3 ("spi: bcm2835: Cache CS register value for ->prepare_message()") limited the number of slaves to 3 at compile-time. The limitation was necessitated by a statically-sized array prepare_cs[] in the driver private data which contains a per-slave register value. The commit sought to enforce the limitation at run-time by setting the controller's num_chipselect to 3: Slaves with a higher chipselect are rejected by spi_add_device(). However the commit neglected that num_chipselect only limits the number of *native* chipselects. If GPIO chipselects are specified in the device tree for more than 3 slaves, num_chipselect is silently raised by of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to the statically-sized array prepare_cs[]. As a bandaid fix which is backportable to stable, raise the number of allowed slaves to 24 (which "ought to be enough for anybody"), enforce the limitation on slave ->setup and revert num_chipselect to 3 (which is the number of native chipselects supported by the controller). An upcoming for-next commit will allow an arbitrary number of slaves. |
| CVE-2021-47281 | In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix race of snd_seq_timer_open() The timer instance per queue is exclusive, and snd_seq_timer_open() should have managed the concurrent accesses. It looks as if it's checking the already existing timer instance at the beginning, but it's not right, because there is no protection, hence any later concurrent call of snd_seq_timer_open() may override the timer instance easily. This may result in UAF, as the leftover timer instance can keep running while the queue itself gets closed, as spotted by syzkaller recently. For avoiding the race, add a proper check at the assignment of tmr->timeri again, and return -EBUSY if it's been already registered. |
| CVE-2021-47280 | In the Linux kernel, the following vulnerability has been resolved: drm: Fix use-after-free read in drm_getunique() There is a time-of-check-to-time-of-use error in drm_getunique() due to retrieving file_priv->master prior to locking the device's master mutex. An example can be seen in the crash report of the use-after-free error found by Syzbot: https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803 In the report, the master pointer was used after being freed. This is because another process had acquired the device's master mutex in drm_setmaster_ioctl(), then overwrote fpriv->master in drm_new_set_master(). The old value of fpriv->master was subsequently freed before the mutex was unlocked. To fix this, we lock the device's master mutex before retrieving the pointer from from fpriv->master. This patch passes the Syzbot reproducer test. |
| CVE-2021-47279 | In the Linux kernel, the following vulnerability has been resolved: usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. |
| CVE-2021-47278 | In the Linux kernel, the following vulnerability has been resolved: bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove() This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. |
| CVE-2021-47277 | In the Linux kernel, the following vulnerability has been resolved: kvm: avoid speculation-based attacks from out-of-range memslot accesses KVM's mechanism for accessing guest memory translates a guest physical address (gpa) to a host virtual address using the right-shifted gpa (also known as gfn) and a struct kvm_memory_slot. The translation is performed in __gfn_to_hva_memslot using the following formula: hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE It is expected that gfn falls within the boundaries of the guest's physical memory. However, a guest can access invalid physical addresses in such a way that the gfn is invalid. __gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first retrieves a memslot through __gfn_to_memslot. While __gfn_to_memslot does check that the gfn falls within the boundaries of the guest's physical memory or not, a CPU can speculate the result of the check and continue execution speculatively using an illegal gfn. The speculation can result in calculating an out-of-bounds hva. If the resulting host virtual address is used to load another guest physical address, this is effectively a Spectre gadget consisting of two consecutive reads, the second of which is data dependent on the first. Right now it's not clear if there are any cases in which this is exploitable. One interesting case was reported by the original author of this patch, and involves visiting guest page tables on x86. Right now these are not vulnerable because the hva read goes through get_user(), which contains an LFENCE speculation barrier. However, there are patches in progress for x86 uaccess.h to mask kernel addresses instead of using LFENCE; once these land, a guest could use speculation to read from the VMM's ring 3 address space. Other architectures such as ARM already use the address masking method, and would be susceptible to this same kind of data-dependent access gadgets. Therefore, this patch proactively protects from these attacks by masking out-of-bounds gfns in __gfn_to_hva_memslot, which blocks speculation of invalid hvas. Sean Christopherson noted that this patch does not cover kvm_read_guest_offset_cached. This however is limited to a few bytes past the end of the cache, and therefore it is unlikely to be useful in the context of building a chain of data dependent accesses. |
| CVE-2021-47276 | In the Linux kernel, the following vulnerability has been resolved: ftrace: Do not blindly read the ip address in ftrace_bug() It was reported that a bug on arm64 caused a bad ip address to be used for updating into a nop in ftrace_init(), but the error path (rightfully) returned -EINVAL and not -EFAULT, as the bug caused more than one error to occur. But because -EINVAL was returned, the ftrace_bug() tried to report what was at the location of the ip address, and read it directly. This caused the machine to panic, as the ip was not pointing to a valid memory address. Instead, read the ip address with copy_from_kernel_nofault() to safely access the memory, and if it faults, report that the address faulted, otherwise report what was in that location. |
| CVE-2021-47275 | In the Linux kernel, the following vulnerability has been resolved: bcache: avoid oversized read request in cache missing code path In the cache missing code path of cached device, if a proper location from the internal B+ tree is matched for a cache miss range, function cached_dev_cache_miss() will be called in cache_lookup_fn() in the following code block, [code block 1] 526 unsigned int sectors = KEY_INODE(k) == s->iop.inode 527 ? min_t(uint64_t, INT_MAX, 528 KEY_START(k) - bio->bi_iter.bi_sector) 529 : INT_MAX; 530 int ret = s->d->cache_miss(b, s, bio, sectors); Here s->d->cache_miss() is the call backfunction pointer initialized as cached_dev_cache_miss(), the last parameter 'sectors' is an important hint to calculate the size of read request to backing device of the missing cache data. Current calculation in above code block may generate oversized value of 'sectors', which consequently may trigger 2 different potential kernel panics by BUG() or BUG_ON() as listed below, 1) BUG_ON() inside bch_btree_insert_key(), [code block 2] 886 BUG_ON(b->ops->is_extents && !KEY_SIZE(k)); 2) BUG() inside biovec_slab(), [code block 3] 51 default: 52 BUG(); 53 return NULL; All the above panics are original from cached_dev_cache_miss() by the oversized parameter 'sectors'. Inside cached_dev_cache_miss(), parameter 'sectors' is used to calculate the size of data read from backing device for the cache missing. This size is stored in s->insert_bio_sectors by the following lines of code, [code block 4] 909 s->insert_bio_sectors = min(sectors, bio_sectors(bio) + reada); Then the actual key inserting to the internal B+ tree is generated and stored in s->iop.replace_key by the following lines of code, [code block 5] 911 s->iop.replace_key = KEY(s->iop.inode, 912 bio->bi_iter.bi_sector + s->insert_bio_sectors, 913 s->insert_bio_sectors); The oversized parameter 'sectors' may trigger panic 1) by BUG_ON() from the above code block. And the bio sending to backing device for the missing data is allocated with hint from s->insert_bio_sectors by the following lines of code, [code block 6] 926 cache_bio = bio_alloc_bioset(GFP_NOWAIT, 927 DIV_ROUND_UP(s->insert_bio_sectors, PAGE_SECTORS), 928 &dc->disk.bio_split); The oversized parameter 'sectors' may trigger panic 2) by BUG() from the agove code block. Now let me explain how the panics happen with the oversized 'sectors'. In code block 5, replace_key is generated by macro KEY(). From the definition of macro KEY(), [code block 7] 71 #define KEY(inode, offset, size) \ 72 ((struct bkey) { \ 73 .high = (1ULL << 63) | ((__u64) (size) << 20) | (inode), \ 74 .low = (offset) \ 75 }) Here 'size' is 16bits width embedded in 64bits member 'high' of struct bkey. But in code block 1, if "KEY_START(k) - bio->bi_iter.bi_sector" is very probably to be larger than (1<<16) - 1, which makes the bkey size calculation in code block 5 is overflowed. In one bug report the value of parameter 'sectors' is 131072 (= 1 << 17), the overflowed 'sectors' results the overflowed s->insert_bio_sectors in code block 4, then makes size field of s->iop.replace_key to be 0 in code block 5. Then the 0- sized s->iop.replace_key is inserted into the internal B+ tree as cache missing check key (a special key to detect and avoid a racing between normal write request and cache missing read request) as, [code block 8] 915 ret = bch_btree_insert_check_key(b, &s->op, &s->iop.replace_key); Then the 0-sized s->iop.replace_key as 3rd parameter triggers the bkey size check BUG_ON() in code block 2, and causes the kernel panic 1). Another ke ---truncated--- |
| CVE-2021-47274 | In the Linux kernel, the following vulnerability has been resolved: tracing: Correct the length check which causes memory corruption We've suffered from severe kernel crashes due to memory corruption on our production environment, like, Call Trace: [1640542.554277] general protection fault: 0000 [#1] SMP PTI [1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G [1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190 [1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286 [1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX: 0000000006e931bf [1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI: ffff9a45ff004300 [1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09: 0000000000000000 [1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9a20608d [1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15: 696c662f65636976 [1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000) knlGS:0000000000000000 [1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4: 00000000003606e0 [1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1640542.566742] Call Trace: [1640542.567009] anon_vma_clone+0x5d/0x170 [1640542.567417] __split_vma+0x91/0x1a0 [1640542.567777] do_munmap+0x2c6/0x320 [1640542.568128] vm_munmap+0x54/0x70 [1640542.569990] __x64_sys_munmap+0x22/0x30 [1640542.572005] do_syscall_64+0x5b/0x1b0 [1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [1640542.575642] RIP: 0033:0x7f45d6e61e27 James Wang has reproduced it stably on the latest 4.19 LTS. After some debugging, we finally proved that it's due to ftrace buffer out-of-bound access using a debug tool as follows: [ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000 [ 86.780806] no_context+0xdf/0x3c0 [ 86.784327] __do_page_fault+0x252/0x470 [ 86.788367] do_page_fault+0x32/0x140 [ 86.792145] page_fault+0x1e/0x30 [ 86.795576] strncpy_from_unsafe+0x66/0xb0 [ 86.799789] fetch_memory_string+0x25/0x40 [ 86.804002] fetch_deref_string+0x51/0x60 [ 86.808134] kprobe_trace_func+0x32d/0x3a0 [ 86.812347] kprobe_dispatcher+0x45/0x50 [ 86.816385] kprobe_ftrace_handler+0x90/0xf0 [ 86.820779] ftrace_ops_assist_func+0xa1/0x140 [ 86.825340] 0xffffffffc00750bf [ 86.828603] do_sys_open+0x5/0x1f0 [ 86.832124] do_syscall_64+0x5b/0x1b0 [ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9 commit b220c049d519 ("tracing: Check length before giving out the filter buffer") adds length check to protect trace data overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent overflow entirely, the length check should also take the sizeof entry->array[0] into account, since this array[0] is filled the length of trace data and occupy addtional space and risk overflow. |
| CVE-2021-47273 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled When only PHY1 is used (for example on Odroid-HC4), the regmap init code uses the usb2 ports when doesn't initialize the PHY1 regmap entry. This fixes: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... pc : regmap_update_bits_base+0x40/0xa0 lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 ... Call trace: regmap_update_bits_base+0x40/0xa0 dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 dwc3_meson_g12a_usb2_init+0x7c/0xc8 dwc3_meson_g12a_usb_init+0x28/0x48 dwc3_meson_g12a_probe+0x298/0x540 platform_probe+0x70/0xe0 really_probe+0xf0/0x4d8 driver_probe_device+0xfc/0x168 ... |
| CVE-2021-47272 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULL There exists a possible scenario in which dwc3_gadget_init() can fail: during during host -> peripheral mode switch in dwc3_set_mode(), and a pending gadget driver fails to bind. Then, if the DRD undergoes another mode switch from peripheral->host the resulting dwc3_gadget_exit() will attempt to reference an invalid and dangling dwc->gadget pointer as well as call dma_free_coherent() on unmapped DMA pointers. The exact scenario can be reproduced as follows: - Start DWC3 in peripheral mode - Configure ConfigFS gadget with FunctionFS instance (or use g_ffs) - Run FunctionFS userspace application (open EPs, write descriptors, etc) - Bind gadget driver to DWC3's UDC - Switch DWC3 to host mode => dwc3_gadget_exit() is called. usb_del_gadget() will put the ConfigFS driver instance on the gadget_driver_pending_list - Stop FunctionFS application (closes the ep files) - Switch DWC3 to peripheral mode => dwc3_gadget_init() fails as usb_add_gadget() calls check_pending_gadget_drivers() and attempts to rebind the UDC to the ConfigFS gadget but fails with -19 (-ENODEV) because the FFS instance is not in FFS_ACTIVE state (userspace has not re-opened and written the descriptors yet, i.e. desc_ready!=0). - Switch DWC3 back to host mode => dwc3_gadget_exit() is called again, but this time dwc->gadget is invalid. Although it can be argued that userspace should take responsibility for ensuring that the FunctionFS application be ready prior to allowing the composite driver bind to the UDC, failure to do so should not result in a panic from the kernel driver. Fix this by setting dwc->gadget to NULL in the failure path of dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out unless the gadget pointer is valid. |
| CVE-2021-47271 | In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler Patch fixes the following critical issue caused by deadlock which has been detected during testing NCM class: smp: csd: Detected non-responsive CSD lock (#1) on CPU#0 smp: csd: CSD lock (#1) unresponsive. .... RIP: 0010:native_queued_spin_lock_slowpath+0x61/0x1d0 RSP: 0018:ffffbc494011cde0 EFLAGS: 00000002 RAX: 0000000000000101 RBX: ffff9ee8116b4a68 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ee8116b4658 RBP: ffffbc494011cde0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658 R13: ffff9ee8116b4670 R14: 0000000000000246 R15: ffff9ee8116b4658 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7bcc41a830 CR3: 000000007a612003 CR4: 00000000001706e0 Call Trace: <IRQ> do_raw_spin_lock+0xc0/0xd0 _raw_spin_lock_irqsave+0x95/0xa0 cdnsp_gadget_ep_queue.cold+0x88/0x107 [cdnsp_udc_pci] usb_ep_queue+0x35/0x110 eth_start_xmit+0x220/0x3d0 [u_ether] ncm_tx_timeout+0x34/0x40 [usb_f_ncm] ? ncm_free_inst+0x50/0x50 [usb_f_ncm] __hrtimer_run_queues+0xac/0x440 hrtimer_run_softirq+0x8c/0xb0 __do_softirq+0xcf/0x428 asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x61/0x70 irq_exit_rcu+0xc1/0xd0 sysvec_apic_timer_interrupt+0x52/0xb0 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0010:do_raw_spin_trylock+0x18/0x40 RSP: 0018:ffffbc494138bda8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff9ee8116b4658 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9ee8116b4658 RBP: ffffbc494138bda8 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658 R13: ffff9ee8116b4670 R14: ffff9ee7b5c73d80 R15: ffff9ee8116b4000 _raw_spin_lock+0x3d/0x70 ? cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci] cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci] ? cdnsp_remove_request+0x1f0/0x1f0 [cdnsp_udc_pci] ? cdnsp_thread_irq_handler+0x5/0xa0 [cdnsp_udc_pci] ? irq_thread+0xa0/0x1c0 irq_thread_fn+0x28/0x60 irq_thread+0x105/0x1c0 ? __kthread_parkme+0x42/0x90 ? irq_forced_thread_fn+0x90/0x90 ? wake_threads_waitq+0x30/0x30 ? irq_thread_check_affinity+0xe0/0xe0 kthread+0x12a/0x160 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 The root cause of issue is spin_lock/spin_unlock instruction instead spin_lock_irqsave/spin_lock_irqrestore in cdnsp_thread_irq_handler function. |
| CVE-2021-47270 | In the Linux kernel, the following vulnerability has been resolved: usb: fix various gadgets null ptr deref on 10gbps cabling. This avoids a null pointer dereference in f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm} by simply reusing the 5gbps config for 10gbps. |
| CVE-2021-47269 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: ep0: fix NULL pointer exception There is no validation of the index from dwc3_wIndex_to_dep() and we might be referring a non-existing ep and trigger a NULL pointer exception. In certain configurations we might use fewer eps and the index might wrongly indicate a larger ep index than existing. By adding this validation from the patch we can actually report a wrong index back to the caller. In our usecase we are using a composite device on an older kernel, but upstream might use this fix also. Unfortunately, I cannot describe the hardware for others to reproduce the issue as it is a proprietary implementation. [ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4 [ 82.966891] Mem abort info: [ 82.969663] ESR = 0x96000006 [ 82.972703] Exception class = DABT (current EL), IL = 32 bits [ 82.978603] SET = 0, FnV = 0 [ 82.981642] EA = 0, S1PTW = 0 [ 82.984765] Data abort info: [ 82.987631] ISV = 0, ISS = 0x00000006 [ 82.991449] CM = 0, WnR = 0 [ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc [ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000 [ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c) [ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1 [ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c [ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94 ... [ 83.141788] Call trace: [ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c [ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94 [ 83.181546] ---[ end trace aac6b5267d84c32f ]--- |
| CVE-2021-47268 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port A pending hrtimer may expire after the kthread_worker of tcpm port is destroyed, see below kernel dump when do module unload, fix it by cancel the 2 hrtimers. [ 111.517018] Unable to handle kernel paging request at virtual address ffff8000118cb880 [ 111.518786] blk_update_request: I/O error, dev sda, sector 60061185 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 111.526594] Mem abort info: [ 111.526597] ESR = 0x96000047 [ 111.526600] EC = 0x25: DABT (current EL), IL = 32 bits [ 111.526604] SET = 0, FnV = 0 [ 111.526607] EA = 0, S1PTW = 0 [ 111.526610] Data abort info: [ 111.526612] ISV = 0, ISS = 0x00000047 [ 111.526615] CM = 0, WnR = 1 [ 111.526619] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041d75000 [ 111.526623] [ffff8000118cb880] pgd=10000001bffff003, p4d=10000001bffff003, pud=10000001bfffe003, pmd=10000001bfffa003, pte=0000000000000000 [ 111.526642] Internal error: Oops: 96000047 [#1] PREEMPT SMP [ 111.526647] Modules linked in: dwc3_imx8mp dwc3 phy_fsl_imx8mq_usb [last unloaded: tcpci] [ 111.526663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc4-00927-gebbe9dbd802c-dirty #36 [ 111.526670] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 111.526674] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO BTYPE=--) [ 111.526681] pc : queued_spin_lock_slowpath+0x1a0/0x390 [ 111.526695] lr : _raw_spin_lock_irqsave+0x88/0xb4 [ 111.526703] sp : ffff800010003e20 [ 111.526706] x29: ffff800010003e20 x28: ffff00017f380180 [ 111.537156] buffer_io_error: 6 callbacks suppressed [ 111.537162] Buffer I/O error on dev sda1, logical block 60040704, async page read [ 111.539932] x27: ffff00017f3801c0 [ 111.539938] x26: ffff800010ba2490 x25: 0000000000000000 x24: 0000000000000001 [ 111.543025] blk_update_request: I/O error, dev sda, sector 60061186 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0 [ 111.548304] [ 111.548306] x23: 00000000000000c0 x22: ffff0000c2a9f184 x21: ffff00017f380180 [ 111.551374] Buffer I/O error on dev sda1, logical block 60040705, async page read [ 111.554499] [ 111.554503] x20: ffff0000c5f14210 x19: 00000000000000c0 x18: 0000000000000000 [ 111.557391] Buffer I/O error on dev sda1, logical block 60040706, async page read [ 111.561218] [ 111.561222] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 111.564205] Buffer I/O error on dev sda1, logical block 60040707, async page read [ 111.570887] x14: 00000000000000f5 x13: 0000000000000001 x12: 0000000000000040 [ 111.570902] x11: ffff0000c05ac6d8 [ 111.583420] Buffer I/O error on dev sda1, logical block 60040708, async page read [ 111.588978] x10: 0000000000000000 x9 : 0000000000040000 [ 111.588988] x8 : 0000000000000000 [ 111.597173] Buffer I/O error on dev sda1, logical block 60040709, async page read [ 111.605766] x7 : ffff00017f384880 x6 : ffff8000118cb880 [ 111.605777] x5 : ffff00017f384880 [ 111.611094] Buffer I/O error on dev sda1, logical block 60040710, async page read [ 111.617086] x4 : 0000000000000000 x3 : ffff0000c2a9f184 [ 111.617096] x2 : ffff8000118cb880 [ 111.622242] Buffer I/O error on dev sda1, logical block 60040711, async page read [ 111.626927] x1 : ffff8000118cb880 x0 : ffff00017f384888 [ 111.626938] Call trace: [ 111.626942] queued_spin_lock_slowpath+0x1a0/0x390 [ 111.795809] kthread_queue_work+0x30/0xc0 [ 111.799828] state_machine_timer_handler+0x20/0x30 [ 111.804624] __hrtimer_run_queues+0x140/0x1e0 [ 111.808990] hrtimer_interrupt+0xec/0x2c0 [ 111.813004] arch_timer_handler_phys+0x38/0x50 [ 111.817456] handle_percpu_devid_irq+0x88/0x150 [ 111.821991] __handle_domain_irq+0x80/0xe0 [ 111.826093] gic_handle_irq+0xc0/0x140 [ 111.829848] el1_irq+0xbc/0x154 [ 111.832991] arch_cpu_idle+0x1c/0x2c [ 111.836572] default_idle_call+0x24/0x6c [ 111.840497] do_idle+0x238/0x2ac [ 1 ---truncated--- |
| CVE-2021-47267 | In the Linux kernel, the following vulnerability has been resolved: usb: fix various gadget panics on 10gbps cabling usb_assign_descriptors() is called with 5 parameters, the last 4 of which are the usb_descriptor_header for: full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps), high-speed (USB2.0 - 480Mbps), super-speed (USB3.0 - 5Gbps), super-speed-plus (USB3.1 - 10Gbps). The differences between full/high/super-speed descriptors are usually substantial (due to changes in the maximum usb block size from 64 to 512 to 1024 bytes and other differences in the specs), while the difference between 5 and 10Gbps descriptors may be as little as nothing (in many cases the same tuning is simply good enough). However if a gadget driver calls usb_assign_descriptors() with a NULL descriptor for super-speed-plus and is then used on a max 10gbps configuration, the kernel will crash with a null pointer dereference, when a 10gbps capable device port + cable + host port combination shows up. (This wouldn't happen if the gadget max-speed was set to 5gbps, but it of course defaults to the maximum, and there's no real reason to artificially limit it) The fix is to simply use the 5gbps descriptor as the 10gbps descriptor, if a 10gbps descriptor wasn't provided. Obviously this won't fix the problem if the 5gbps descriptor is also NULL, but such cases can't be so trivially solved (and any such gadgets are unlikely to be used with USB3 ports any way). |
| CVE-2021-47266 | In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Fix warning caused by destroying non-initial netns After the commit 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces"), if the IPoIB device is moved to non-initial netns, destroying that netns lets the device vanish instead of moving it back to the initial netns, This is happening because default_device_exit() skips the interfaces due to having rtnl_link_ops set. Steps to reporoduce: ip netns add foo ip link set mlx5_ib0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50 Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d fuse CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S W 5.13.0-rc1+ #1 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: netns cleanup_net RIP: 0010:netdev_exit+0x3f/0x50 Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48 8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206 RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00 RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00 R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620 R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20 FS: 0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ops_exit_list.isra.9+0x36/0x70 cleanup_net+0x234/0x390 process_one_work+0x1cb/0x360 ? process_one_work+0x360/0x360 worker_thread+0x30/0x370 ? process_one_work+0x360/0x360 kthread+0x116/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 To avoid the above warning and later on the kernel panic that could happen on shutdown due to a NULL pointer dereference, make sure to set the netns_refund flag that was introduced by commit 3a5ca857079e ("can: dev: Move device back to init netns on owning netns delete") to properly restore the IPoIB interfaces to the initial netns. |
| CVE-2021-47265 | In the Linux kernel, the following vulnerability has been resolved: RDMA: Verify port when creating flow rule Validate port value provided by the user and with that remove no longer needed validation by the driver. The missing check in the mlx5_ib driver could cause to the below oops. Call trace: _create_flow_rule+0x2d4/0xf28 [mlx5_ib] mlx5_ib_create_flow+0x2d0/0x5b0 [mlx5_ib] ib_uverbs_ex_create_flow+0x4cc/0x624 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd4/0x150 [ib_uverbs] ib_uverbs_cmd_verbs.isra.7+0xb28/0xc50 [ib_uverbs] ib_uverbs_ioctl+0x158/0x1d0 [ib_uverbs] do_vfs_ioctl+0xd0/0xaf0 ksys_ioctl+0x84/0xb4 __arm64_sys_ioctl+0x28/0xc4 el0_svc_common.constprop.3+0xa4/0x254 el0_svc_handler+0x84/0xa0 el0_svc+0x10/0x26c Code: b9401260 f9615681 51000400 8b001c20 (f9403c1a) |
| CVE-2021-47264 | In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix Null-point-dereference in fmt_single_name() Check the return value of devm_kstrdup() in case of Null-point-dereference. |
| CVE-2021-47263 | In the Linux kernel, the following vulnerability has been resolved: gpio: wcd934x: Fix shift-out-of-bounds error bit-mask for pins 0 to 4 is BIT(0) to BIT(4) however we ended up with BIT(n - 1) which is not right, and this was caught by below usban check UBSAN: shift-out-of-bounds in drivers/gpio/gpio-wcd934x.c:34:14 |
| CVE-2021-47262 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message Use the __string() machinery provided by the tracing subystem to make a copy of the string literals consumed by the "nested VM-Enter failed" tracepoint. A complete copy is necessary to ensure that the tracepoint can't outlive the data/memory it consumes and deference stale memory. Because the tracepoint itself is defined by kvm, if kvm-intel and/or kvm-amd are built as modules, the memory holding the string literals defined by the vendor modules will be freed when the module is unloaded, whereas the tracepoint and its data in the ring buffer will live until kvm is unloaded (or "indefinitely" if kvm is built-in). This bug has existed since the tracepoint was added, but was recently exposed by a new check in tracing to detect exactly this type of bug. fmt: '%s%s ' current_buffer: ' vmx_dirty_log_t-140127 [003] .... kvm_nested_vmenter_failed: ' WARNING: CPU: 3 PID: 140134 at kernel/trace/trace.c:3759 trace_check_vprintf+0x3be/0x3e0 CPU: 3 PID: 140134 Comm: less Not tainted 5.13.0-rc1-ce2e73ce600a-req #184 Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014 RIP: 0010:trace_check_vprintf+0x3be/0x3e0 Code: <0f> 0b 44 8b 4c 24 1c e9 a9 fe ff ff c6 44 02 ff 00 49 8b 97 b0 20 RSP: 0018:ffffa895cc37bcb0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa895cc37bd08 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff9766cfad74f8 RBP: ffffffffc0a041d4 R08: ffff9766cfad74f0 R09: ffffa895cc37bad8 R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffc0a041d4 R13: ffffffffc0f4dba8 R14: 0000000000000000 R15: ffff976409f2c000 FS: 00007f92fa200740(0000) GS:ffff9766cfac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559bd11b0000 CR3: 000000019fbaa002 CR4: 00000000001726e0 Call Trace: trace_event_printf+0x5e/0x80 trace_raw_output_kvm_nested_vmenter_failed+0x3a/0x60 [kvm] print_trace_line+0x1dd/0x4e0 s_show+0x45/0x150 seq_read_iter+0x2d5/0x4c0 seq_read+0x106/0x150 vfs_read+0x98/0x180 ksys_read+0x5f/0xe0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47261 | In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix initializing CQ fragments buffer The function init_cq_frag_buf() can be called to initialize the current CQ fragments buffer cq->buf, or the temporary cq->resize_buf that is filled during CQ resize operation. However, the offending commit started to use function get_cqe() for getting the CQEs, the issue with this change is that get_cqe() always returns CQEs from cq->buf, which leads us to initialize the wrong buffer, and in case of enlarging the CQ we try to access elements beyond the size of the current cq->buf and eventually hit a kernel panic. [exception RIP: init_cq_frag_buf+103] [ffff9f799ddcbcd8] mlx5_ib_resize_cq at ffffffffc0835d60 [mlx5_ib] [ffff9f799ddcbdb0] ib_resize_cq at ffffffffc05270df [ib_core] [ffff9f799ddcbdc0] llt_rdma_setup_qp at ffffffffc0a6a712 [llt] [ffff9f799ddcbe10] llt_rdma_cc_event_action at ffffffffc0a6b411 [llt] [ffff9f799ddcbe98] llt_rdma_client_conn_thread at ffffffffc0a6bb75 [llt] [ffff9f799ddcbec8] kthread at ffffffffa66c5da1 [ffff9f799ddcbf50] ret_from_fork_nospec_begin at ffffffffa6d95ddd Fix it by getting the needed CQE by calling mlx5_frag_buf_get_wqe() that takes the correct source buffer as a parameter. |
| CVE-2021-47260 | In the Linux kernel, the following vulnerability has been resolved: NFS: Fix a potential NULL dereference in nfs_get_client() None of the callers are expecting NULL returns from nfs_get_client() so this code will lead to an Oops. It's better to return an error pointer. I expect that this is dead code so hopefully no one is affected. |
| CVE-2021-47259 | In the Linux kernel, the following vulnerability has been resolved: NFS: Fix use-after-free in nfs4_init_client() KASAN reports a use-after-free when attempting to mount two different exports through two different NICs that belong to the same server. Olga was able to hit this with kernels starting somewhere between 5.7 and 5.10, but I traced the patch that introduced the clear_bit() call to 4.13. So something must have changed in the refcounting of the clp pointer to make this call to nfs_put_client() the very last one. |
| CVE-2021-47258 | In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix error handling of scsi_host_alloc() After device is initialized via device_initialize(), or its name is set via dev_set_name(), the device has to be freed via put_device(). Otherwise device name will be leaked because it is allocated dynamically in dev_set_name(). Fix the leak by replacing kfree() with put_device(). Since scsi_host_dev_release() properly handles IDA and kthread removal, remove special-casing these from the error handling as well. |
| CVE-2021-47257 | In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: fix null deref in parse dev addr Fix a logic error that could result in a null deref if the user sets the mode incorrectly for the given addr type. |
| CVE-2021-47256 | In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: make sure wait for page writeback in memory_failure Our syzkaller trigger the "BUG_ON(!list_empty(&inode->i_wb_list))" in clear_inode: kernel BUG at fs/inode.c:519! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: Process syz-executor.0 (pid: 249, stack limit = 0x00000000a12409d7) CPU: 1 PID: 249 Comm: syz-executor.0 Not tainted 4.19.95 Hardware name: linux,dummy-virt (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : clear_inode+0x280/0x2a8 lr : clear_inode+0x280/0x2a8 Call trace: clear_inode+0x280/0x2a8 ext4_clear_inode+0x38/0xe8 ext4_free_inode+0x130/0xc68 ext4_evict_inode+0xb20/0xcb8 evict+0x1a8/0x3c0 iput+0x344/0x460 do_unlinkat+0x260/0x410 __arm64_sys_unlinkat+0x6c/0xc0 el0_svc_common+0xdc/0x3b0 el0_svc_handler+0xf8/0x160 el0_svc+0x10/0x218 Kernel panic - not syncing: Fatal exception A crash dump of this problem show that someone called __munlock_pagevec to clear page LRU without lock_page: do_mmap -> mmap_region -> do_munmap -> munlock_vma_pages_range -> __munlock_pagevec. As a result memory_failure will call identify_page_state without wait_on_page_writeback. And after truncate_error_page clear the mapping of this page. end_page_writeback won't call sb_clear_inode_writeback to clear inode->i_wb_list. That will trigger BUG_ON in clear_inode! Fix it by checking PageWriteback too to help determine should we skip wait_on_page_writeback. |
| CVE-2021-47255 | In the Linux kernel, the following vulnerability has been resolved: kvm: LAPIC: Restore guard to prevent illegal APIC register access Per the SDM, "any access that touches bytes 4 through 15 of an APIC register may cause undefined behavior and must not be executed." Worse, such an access in kvm_lapic_reg_read can result in a leak of kernel stack contents. Prior to commit 01402cf81051 ("kvm: LAPIC: write down valid APIC registers"), such an access was explicitly disallowed. Restore the guard that was removed in that commit. |
| CVE-2021-47254 | In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in gfs2_glock_shrink_scan The GLF_LRU flag is checked under lru_lock in gfs2_glock_remove_from_lru() to remove the glock from the lru list in __gfs2_glock_put(). On the shrink scan path, the same flag is cleared under lru_lock but because of cond_resched_lock(&lru_lock) in gfs2_dispose_glock_lru(), progress on the put side can be made without deleting the glock from the lru list. Keep GLF_LRU across the race window opened by cond_resched_lock(&lru_lock) to ensure correct behavior on both sides - clear GLF_LRU after list_del under lru_lock. |
| CVE-2021-47253 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential memory leak in DMUB hw_init [Why] On resume we perform DMUB hw_init which allocates memory: dm_resume->dm_dmub_hw_init->dc_dmub_srv_create->kzalloc That results in memory leak in suspend/resume scenarios. [How] Allocate memory for the DC wrapper to DMUB only if it was not allocated before. No need to reallocate it on suspend/resume. |
| CVE-2021-47252 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid WARN_ON timing related checks The soft/batadv interface for a queued OGM can be changed during the time the OGM was queued for transmission and when the OGM is actually transmitted by the worker. But WARN_ON must be used to denote kernel bugs and not to print simple warnings. A warning can simply be printed using pr_warn. |
| CVE-2021-47251 | In the Linux kernel, the following vulnerability has been resolved: mac80211: fix skb length check in ieee80211_scan_rx() Replace hard-coded compile-time constants for header length check with dynamic determination based on the frame type. Otherwise, we hit a validation WARN_ON in cfg80211 later. [style fixes, reword commit message] |
| CVE-2021-47250 | In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix memory leak in netlbl_cipsov4_add_std Reported by syzkaller: BUG: memory leak unreferenced object 0xffff888105df7000 (size 64): comm "syz-executor842", pid 360, jiffies 4294824824 (age 22.546s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000e67ed558>] kmalloc include/linux/slab.h:590 [inline] [<00000000e67ed558>] kzalloc include/linux/slab.h:720 [inline] [<00000000e67ed558>] netlbl_cipsov4_add_std net/netlabel/netlabel_cipso_v4.c:145 [inline] [<00000000e67ed558>] netlbl_cipsov4_add+0x390/0x2340 net/netlabel/netlabel_cipso_v4.c:416 [<0000000006040154>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 net/netlink/genetlink.c:739 [<00000000204d7a1c>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] [<00000000204d7a1c>] genl_rcv_msg+0x2bf/0x4f0 net/netlink/genetlink.c:800 [<00000000c0d6a995>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000d78b9d2c>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 [<000000009733081b>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<000000009733081b>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000d5fd43b8>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000a2d1e40>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000a2d1e40>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000321d1969>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000964e16bc>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000001615e288>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<000000004ee8b6a5>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<00000000171c7cee>] entry_SYSCALL_64_after_hwframe+0x44/0xae The memory of doi_def->map.std pointing is allocated in netlbl_cipsov4_add_std, but no place has freed it. It should be freed in cipso_v4_doi_free which frees the cipso DOI resource. |
| CVE-2021-47249 | In the Linux kernel, the following vulnerability has been resolved: net: rds: fix memory leak in rds_recvmsg Syzbot reported memory leak in rds. The problem was in unputted refcount in case of error. int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int msg_flags) { ... if (!rds_next_incoming(rs, &inc)) { ... } After this "if" inc refcount incremented and if (rds_cmsg_recv(inc, msg, rs)) { ret = -EFAULT; goto out; } ... out: return ret; } in case of rds_cmsg_recv() fail the refcount won't be decremented. And it's easy to see from ftrace log, that rds_inc_addref() don't have rds_inc_put() pair in rds_recvmsg() after rds_cmsg_recv() 1) | rds_recvmsg() { 1) 3.721 us | rds_inc_addref(); 1) 3.853 us | rds_message_inc_copy_to_user(); 1) + 10.395 us | rds_cmsg_recv(); 1) + 34.260 us | } |
| CVE-2021-47248 | In the Linux kernel, the following vulnerability has been resolved: udp: fix race between close() and udp_abort() Kaustubh reported and diagnosed a panic in udp_lib_lookup(). The root cause is udp_abort() racing with close(). Both racing functions acquire the socket lock, but udp{v6}_destroy_sock() release it before performing destructive actions. We can't easily extend the socket lock scope to avoid the race, instead use the SOCK_DEAD flag to prevent udp_abort from doing any action when the critical race happens. Diagnosed-and-tested-by: Kaustubh Pandey <[email protected]> |
| CVE-2021-47247 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free of encap entry in neigh update handler Function mlx5e_rep_neigh_update() wasn't updated to accommodate rtnl lock removal from TC filter update path and properly handle concurrent encap entry insertion/deletion which can lead to following use-after-free: [23827.464923] ================================================================== [23827.469446] BUG: KASAN: use-after-free in mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.470971] Read of size 4 at addr ffff8881d132228c by task kworker/u20:6/21635 [23827.472251] [23827.472615] CPU: 9 PID: 21635 Comm: kworker/u20:6 Not tainted 5.13.0-rc3+ #5 [23827.473788] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [23827.475639] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [23827.476731] Call Trace: [23827.477260] dump_stack+0xbb/0x107 [23827.477906] print_address_description.constprop.0+0x18/0x140 [23827.478896] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.479879] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.480905] kasan_report.cold+0x7c/0xd8 [23827.481701] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.482744] kasan_check_range+0x145/0x1a0 [23827.493112] mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.494054] ? mlx5e_tc_tun_encap_info_equal_generic+0x140/0x140 [mlx5_core] [23827.495296] mlx5e_rep_neigh_update+0x41e/0x5e0 [mlx5_core] [23827.496338] ? mlx5e_rep_neigh_entry_release+0xb80/0xb80 [mlx5_core] [23827.497486] ? read_word_at_a_time+0xe/0x20 [23827.498250] ? strscpy+0xa0/0x2a0 [23827.498889] process_one_work+0x8ac/0x14e0 [23827.499638] ? lockdep_hardirqs_on_prepare+0x400/0x400 [23827.500537] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 [23827.501359] ? rwlock_bug.part.0+0x90/0x90 [23827.502116] worker_thread+0x53b/0x1220 [23827.502831] ? process_one_work+0x14e0/0x14e0 [23827.503627] kthread+0x328/0x3f0 [23827.504254] ? _raw_spin_unlock_irq+0x24/0x40 [23827.505065] ? __kthread_bind_mask+0x90/0x90 [23827.505912] ret_from_fork+0x1f/0x30 [23827.506621] [23827.506987] Allocated by task 28248: [23827.507694] kasan_save_stack+0x1b/0x40 [23827.508476] __kasan_kmalloc+0x7c/0x90 [23827.509197] mlx5e_attach_encap+0xde1/0x1d40 [mlx5_core] [23827.510194] mlx5e_tc_add_fdb_flow+0x397/0xc40 [mlx5_core] [23827.511218] __mlx5e_add_fdb_flow+0x519/0xb30 [mlx5_core] [23827.512234] mlx5e_configure_flower+0x191c/0x4870 [mlx5_core] [23827.513298] tc_setup_cb_add+0x1d5/0x420 [23827.514023] fl_hw_replace_filter+0x382/0x6a0 [cls_flower] [23827.514975] fl_change+0x2ceb/0x4a51 [cls_flower] [23827.515821] tc_new_tfilter+0x89a/0x2070 [23827.516548] rtnetlink_rcv_msg+0x644/0x8c0 [23827.517300] netlink_rcv_skb+0x11d/0x340 [23827.518021] netlink_unicast+0x42b/0x700 [23827.518742] netlink_sendmsg+0x743/0xc20 [23827.519467] sock_sendmsg+0xb2/0xe0 [23827.520131] ____sys_sendmsg+0x590/0x770 [23827.520851] ___sys_sendmsg+0xd8/0x160 [23827.521552] __sys_sendmsg+0xb7/0x140 [23827.522238] do_syscall_64+0x3a/0x70 [23827.522907] entry_SYSCALL_64_after_hwframe+0x44/0xae [23827.523797] [23827.524163] Freed by task 25948: [23827.524780] kasan_save_stack+0x1b/0x40 [23827.525488] kasan_set_track+0x1c/0x30 [23827.526187] kasan_set_free_info+0x20/0x30 [23827.526968] __kasan_slab_free+0xed/0x130 [23827.527709] slab_free_freelist_hook+0xcf/0x1d0 [23827.528528] kmem_cache_free_bulk+0x33a/0x6e0 [23827.529317] kfree_rcu_work+0x55f/0xb70 [23827.530024] process_one_work+0x8ac/0x14e0 [23827.530770] worker_thread+0x53b/0x1220 [23827.531480] kthread+0x328/0x3f0 [23827.532114] ret_from_fork+0x1f/0x30 [23827.532785] [23827.533147] Last potentially related work creation: [23827.534007] kasan_save_stack+0x1b/0x40 [23827.534710] kasan_record_aux_stack+0xab/0xc0 [23827.535492] kvfree_call_rcu+0x31/0x7b0 [23827.536206] mlx5e_tc_del ---truncated--- |
| CVE-2021-47246 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix page reclaim for dead peer hairpin When adding a hairpin flow, a firmware-side send queue is created for the peer net device, which claims some host memory pages for its internal ring buffer. If the peer net device is removed/unbound before the hairpin flow is deleted, then the send queue is not destroyed which leads to a stack trace on pci device remove: [ 748.005230] mlx5_core 0000:08:00.2: wait_func:1094:(pid 12985): MANAGE_PAGES(0x108) timeout. Will cause a leak of a command resource [ 748.005231] mlx5_core 0000:08:00.2: reclaim_pages:514:(pid 12985): failed reclaiming pages: err -110 [ 748.001835] mlx5_core 0000:08:00.2: mlx5_reclaim_root_pages:653:(pid 12985): failed reclaiming pages (-110) for func id 0x0 [ 748.002171] ------------[ cut here ]------------ [ 748.001177] FW pages counter is 4 after reclaiming all pages [ 748.001186] WARNING: CPU: 1 PID: 12985 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:685 mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ +0.002771] Modules linked in: cls_flower mlx5_ib mlx5_core ptp pps_core act_mirred sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay fuse [last unloaded: pps_core] [ 748.007225] CPU: 1 PID: 12985 Comm: tee Not tainted 5.12.0+ #1 [ 748.001376] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 748.002315] RIP: 0010:mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ 748.001679] Code: 28 00 00 00 0f 85 22 01 00 00 48 81 c4 b0 00 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c7 40 cc 19 a1 e8 9f 71 0e e2 <0f> 0b e9 30 ff ff ff 48 c7 c7 a0 cc 19 a1 e8 8c 71 0e e2 0f 0b e9 [ 748.003781] RSP: 0018:ffff88815220faf8 EFLAGS: 00010286 [ 748.001149] RAX: 0000000000000000 RBX: ffff8881b4900280 RCX: 0000000000000000 [ 748.001445] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102a441f51 [ 748.001614] RBP: 00000000000032b9 R08: 0000000000000001 R09: ffffed1054a15ee8 [ 748.001446] R10: ffff8882a50af73b R11: ffffed1054a15ee7 R12: fffffbfff07c1e30 [ 748.001447] R13: dffffc0000000000 R14: ffff8881b492cba8 R15: 0000000000000000 [ 748.001429] FS: 00007f58bd08b580(0000) GS:ffff8882a5080000(0000) knlGS:0000000000000000 [ 748.001695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 748.001309] CR2: 000055a026351740 CR3: 00000001d3b48006 CR4: 0000000000370ea0 [ 748.001506] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 748.001483] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 748.001654] Call Trace: [ 748.000576] ? mlx5_satisfy_startup_pages+0x290/0x290 [mlx5_core] [ 748.001416] ? mlx5_cmd_teardown_hca+0xa2/0xd0 [mlx5_core] [ 748.001354] ? mlx5_cmd_init_hca+0x280/0x280 [mlx5_core] [ 748.001203] mlx5_function_teardown+0x30/0x60 [mlx5_core] [ 748.001275] mlx5_uninit_one+0xa7/0xc0 [mlx5_core] [ 748.001200] remove_one+0x5f/0xc0 [mlx5_core] [ 748.001075] pci_device_remove+0x9f/0x1d0 [ 748.000833] device_release_driver_internal+0x1e0/0x490 [ 748.001207] unbind_store+0x19f/0x200 [ 748.000942] ? sysfs_file_ops+0x170/0x170 [ 748.001000] kernfs_fop_write_iter+0x2bc/0x450 [ 748.000970] new_sync_write+0x373/0x610 [ 748.001124] ? new_sync_read+0x600/0x600 [ 748.001057] ? lock_acquire+0x4d6/0x700 [ 748.000908] ? lockdep_hardirqs_on_prepare+0x400/0x400 [ 748.001126] ? fd_install+0x1c9/0x4d0 [ 748.000951] vfs_write+0x4d0/0x800 [ 748.000804] ksys_write+0xf9/0x1d0 [ 748.000868] ? __x64_sys_read+0xb0/0xb0 [ 748.000811] ? filp_open+0x50/0x50 [ 748.000919] ? syscall_enter_from_user_mode+0x1d/0x50 [ 748.001223] do_syscall_64+0x3f/0x80 [ 748.000892] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 748.00 ---truncated--- |
| CVE-2021-47245 | In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: Fix out of bounds when parsing TCP options The TCP option parser in synproxy (synproxy_parse_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added an early return when length < 0 to avoid calling skb_header_pointer with negative length. |
| CVE-2021-47244 | In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix out of bounds when parsing TCP options The TCP option parser in mptcp (mptcp_get_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). |
| CVE-2021-47243 | In the Linux kernel, the following vulnerability has been resolved: sch_cake: Fix out of bounds when parsing TCP options and header The TCP option parser in cake qdisc (cake_get_tcpopt and cake_tcph_may_drop) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added doff validation in cake_get_tcphdr to avoid parsing garbage as TCP header. Although it wasn't strictly an out-of-bounds access (memory was allocated), garbage values could be read where CAKE expected the TCP header if doff was smaller than 5. |
| CVE-2021-47242 | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix soft lookup in subflow_error_report() Maxim reported a soft lookup in subflow_error_report(): watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] RIP: 0010:native_queued_spin_lock_slowpath RSP: 0018:ffffa859c0003bc0 EFLAGS: 00000202 RAX: 0000000000000101 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff9195c2772d88 RSI: 0000000000000000 RDI: ffff9195c2772d88 RBP: ffff9195c2772d00 R08: 00000000000067b0 R09: c6e31da9eb1e44f4 R10: ffff9195ef379700 R11: ffff9195edb50710 R12: ffff9195c2772d88 R13: ffff9195f500e3d0 R14: ffff9195ef379700 R15: ffff9195ef379700 FS: 0000000000000000(0000) GS:ffff91961f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c000407000 CR3: 0000000002988000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_bh subflow_error_report mptcp_subflow_data_available __mptcp_move_skbs_from_subflow mptcp_data_ready tcp_data_queue tcp_rcv_established tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish __netif_receive_skb_one_core netif_receive_skb rtl8139_poll 8139too __napi_poll net_rx_action __do_softirq __irq_exit_rcu common_interrupt </IRQ> The calling function - mptcp_subflow_data_available() - can be invoked from different contexts: - plain ssk socket lock - ssk socket lock + mptcp_data_lock - ssk socket lock + mptcp_data_lock + msk socket lock. Since subflow_error_report() tries to acquire the mptcp_data_lock, the latter two call chains will cause soft lookup. This change addresses the issue moving the error reporting call to outer functions, where the held locks list is known and the we can acquire only the needed one. |
| CVE-2021-47241 | In the Linux kernel, the following vulnerability has been resolved: ethtool: strset: fix message length calculation Outer nest for ETHTOOL_A_STRSET_STRINGSETS is not accounted for. This may result in ETHTOOL_MSG_STRSET_GET producing a warning like: calculated message payload length (684) not sufficient WARNING: CPU: 0 PID: 30967 at net/ethtool/netlink.c:369 ethnl_default_doit+0x87a/0xa20 and a splat. As usually with such warnings three conditions must be met for the warning to trigger: - there must be no skb size rounding up (e.g. reply_size of 684); - string set must be per-device (so that the header gets populated); - the device name must be at least 12 characters long. all in all with current user space it looks like reading priv flags is the only place this could potentially happen. Or with syzbot :) |
| CVE-2021-47240 | In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix OOB Read in qrtr_endpoint_post Syzbot reported slab-out-of-bounds Read in qrtr_endpoint_post. The problem was in wrong _size_ type: if (len != ALIGN(size, 4) + hdrlen) goto err; If size from qrtr_hdr is 4294967293 (0xfffffffd), the result of ALIGN(size, 4) will be 0. In case of len == hdrlen and size == 4294967293 in header this check won't fail and skb_put_data(skb, data + hdrlen, size); will read out of bound from data, which is hdrlen allocated block. |
| CVE-2021-47239 | In the Linux kernel, the following vulnerability has been resolved: net: usb: fix possible use-after-free in smsc75xx_bind The commit 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind") fails to clean up the work scheduled in smsc75xx_reset-> smsc75xx_set_multicast, which leads to use-after-free if the work is scheduled to start after the deallocation. In addition, this patch also removes a dangling pointer - dev->data[0]. This patch calls cancel_work_sync to cancel the scheduled work and set the dangling pointer to NULL. |
| CVE-2021-47238 | In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix memory leak in ip_mc_add1_src BUG: memory leak unreferenced object 0xffff888101bc4c00 (size 32): comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................ backtrace: [<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline] [<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline] [<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline] [<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095 [<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416 [<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline] [<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423 [<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857 [<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117 [<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline] [<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline] [<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125 [<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47 [<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae In commit 24803f38a5c0 ("igmp: do not remove igmp souce list info when set link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed, because it was also called in igmpv3_clear_delrec(). Rough callgraph: inetdev_destroy -> ip_mc_destroy_dev -> igmpv3_clear_delrec -> ip_mc_clear_src -> RCU_INIT_POINTER(dev->ip_ptr, NULL) However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through inetdev_by_index() and then in_dev->mc_list->sources cannot be released by ip_mc_del1_src() in the sock_close. Rough call sequence goes like: sock_close -> __sock_release -> inet_release -> ip_mc_drop_socket -> inetdev_by_index -> ip_mc_leave_src -> ip_mc_del_src -> ip_mc_del1_src So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free in_dev->mc_list->sources. |
| CVE-2021-47237 | In the Linux kernel, the following vulnerability has been resolved: net: hamradio: fix memory leak in mkiss_close My local syzbot instance hit memory leak in mkiss_open()[1]. The problem was in missing free_netdev() in mkiss_close(). In mkiss_open() netdevice is allocated and then registered, but in mkiss_close() netdevice was only unregistered, but not freed. Fail log: BUG: memory leak unreferenced object 0xffff8880281ba000 (size 4096): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0............. 00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880141a9a00 (size 96): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(.... 98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@.......... backtrace: [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310 [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0 [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0 [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880219bfc00 (size 512): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............ 80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff888029b2b200 (size 256): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47236 | In the Linux kernel, the following vulnerability has been resolved: net: cdc_eem: fix tx fixup skb leak when usbnet transmit a skb, eem fixup it in eem_tx_fixup(), if skb_copy_expand() failed, it return NULL, usbnet_start_xmit() will have no chance to free original skb. fix it by free orginal skb in eem_tx_fixup() first, then check skb clone status, if failed, return NULL to usbnet. |
| CVE-2021-47235 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: fix potential use-after-free in ec_bhf_remove static void ec_bhf_remove(struct pci_dev *dev) { ... struct ec_bhf_priv *priv = netdev_priv(net_dev); unregister_netdev(net_dev); free_netdev(net_dev); pci_iounmap(dev, priv->dma_io); pci_iounmap(dev, priv->io); ... } priv is netdev private data, but it is used after free_netdev(). It can cause use-after-free when accessing priv pointer. So, fix it by moving free_netdev() after pci_iounmap() calls. |
| CVE-2021-47234 | In the Linux kernel, the following vulnerability has been resolved: phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init() Use clk_disable_unprepare() in the error path of mtk_phy_init() to fix some resource leaks. |
| CVE-2021-47233 | In the Linux kernel, the following vulnerability has been resolved: regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULL devm_gpiod_get_array_optional may return NULL if no GPIO was assigned. |
| CVE-2021-47232 | In the Linux kernel, the following vulnerability has been resolved: can: j1939: fix Use-after-Free, hold skb ref while in use This patch fixes a Use-after-Free found by the syzbot. The problem is that a skb is taken from the per-session skb queue, without incrementing the ref count. This leads to a Use-after-Free if the skb is taken concurrently from the session queue due to a CTS. |
| CVE-2021-47231 | In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: fix memory leak in mcba_usb Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) and this flag cannot be used with coherent buffers. Fail log: | [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected | [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem) So, all allocated buffers should be freed with usb_free_coherent() explicitly NOTE: The same pattern for allocating and freeing coherent buffers is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c |
| CVE-2021-47230 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Immediately reset the MMU context when the SMM flag is cleared Immediately reset the MMU context when the vCPU's SMM flag is cleared so that the SMM flag in the MMU role is always synchronized with the vCPU's flag. If RSM fails (which isn't correctly emulated), KVM will bail without calling post_leave_smm() and leave the MMU in a bad state. The bad MMU role can lead to a NULL pointer dereference when grabbing a shadow page's rmap for a page fault as the initial lookups for the gfn will happen with the vCPU's SMM flag (=0), whereas the rmap lookup will use the shadow page's SMM flag, which comes from the MMU (=1). SMM has an entirely different set of memslots, and so the initial lookup can find a memslot (SMM=0) and then explode on the rmap memslot lookup (SMM=1). general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 8410 Comm: syz-executor382 Not tainted 5.13.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__gfn_to_rmap arch/x86/kvm/mmu/mmu.c:935 [inline] RIP: 0010:gfn_to_rmap+0x2b0/0x4d0 arch/x86/kvm/mmu/mmu.c:947 Code: <42> 80 3c 20 00 74 08 4c 89 ff e8 f1 79 a9 00 4c 89 fb 4d 8b 37 44 RSP: 0018:ffffc90000ffef98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888015b9f414 RCX: ffff888019669c40 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffff811d9cdb R09: ffffed10065a6002 R10: ffffed10065a6002 R11: 0000000000000000 R12: dffffc0000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 0000000000000000 FS: 000000000124b300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000028e31000 CR4: 00000000001526e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rmap_add arch/x86/kvm/mmu/mmu.c:965 [inline] mmu_set_spte+0x862/0xe60 arch/x86/kvm/mmu/mmu.c:2604 __direct_map arch/x86/kvm/mmu/mmu.c:2862 [inline] direct_page_fault+0x1f74/0x2b70 arch/x86/kvm/mmu/mmu.c:3769 kvm_mmu_do_page_fault arch/x86/kvm/mmu.h:124 [inline] kvm_mmu_page_fault+0x199/0x1440 arch/x86/kvm/mmu/mmu.c:5065 vmx_handle_exit+0x26/0x160 arch/x86/kvm/vmx/vmx.c:6122 vcpu_enter_guest+0x3bdd/0x9630 arch/x86/kvm/x86.c:9428 vcpu_run+0x416/0xc20 arch/x86/kvm/x86.c:9494 kvm_arch_vcpu_ioctl_run+0x4e8/0xa40 arch/x86/kvm/x86.c:9722 kvm_vcpu_ioctl+0x70f/0xbb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3460 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:1069 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:1055 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x440ce9 |
| CVE-2021-47229 | In the Linux kernel, the following vulnerability has been resolved: PCI: aardvark: Fix kernel panic during PIO transfer Trying to start a new PIO transfer by writing value 0 in PIO_START register when previous transfer has not yet completed (which is indicated by value 1 in PIO_START) causes an External Abort on CPU, which results in kernel panic: SError Interrupt on CPU0, code 0xbf000002 -- SError Kernel panic - not syncing: Asynchronous SError Interrupt To prevent kernel panic, it is required to reject a new PIO transfer when previous one has not finished yet. If previous PIO transfer is not finished yet, the kernel may issue a new PIO request only if the previous PIO transfer timed out. In the past the root cause of this issue was incorrectly identified (as it often happens during link retraining or after link down event) and special hack was implemented in Trusted Firmware to catch all SError events in EL3, to ignore errors with code 0xbf000002 and not forwarding any other errors to kernel and instead throw panic from EL3 Trusted Firmware handler. Links to discussion and patches about this issue: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50 https://lore.kernel.org/linux-pci/[email protected]/ https://lore.kernel.org/linux-pci/[email protected]/ https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541 But the real cause was the fact that during link retraining or after link down event the PIO transfer may take longer time, up to the 1.44s until it times out. This increased probability that a new PIO transfer would be issued by kernel while previous one has not finished yet. After applying this change into the kernel, it is possible to revert the mentioned TF-A hack and SError events do not have to be caught in TF-A EL3. |
| CVE-2021-47228 | In the Linux kernel, the following vulnerability has been resolved: x86/ioremap: Map EFI-reserved memory as encrypted for SEV Some drivers require memory that is marked as EFI boot services data. In order for this memory to not be re-used by the kernel after ExitBootServices(), efi_mem_reserve() is used to preserve it by inserting a new EFI memory descriptor and marking it with the EFI_MEMORY_RUNTIME attribute. Under SEV, memory marked with the EFI_MEMORY_RUNTIME attribute needs to be mapped encrypted by Linux, otherwise the kernel might crash at boot like below: EFI Variables Facility v0.08 2004-May-17 general protection fault, probably for non-canonical address 0x3597688770a868b2: 0000 [#1] SMP NOPTI CPU: 13 PID: 1 Comm: swapper/0 Not tainted 5.12.4-2-default #1 openSUSE Tumbleweed Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:efi_mokvar_entry_next [...] Call Trace: efi_mokvar_sysfs_init ? efi_mokvar_table_init do_one_initcall ? __kmalloc kernel_init_freeable ? rest_init kernel_init ret_from_fork Expand the __ioremap_check_other() function to additionally check for this other type of boot data reserved at runtime and indicate that it should be mapped encrypted for an SEV guest. [ bp: Massage commit message. ] |
| CVE-2021-47227 | In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Prevent state corruption in __fpu__restore_sig() The non-compacted slowpath uses __copy_from_user() and copies the entire user buffer into the kernel buffer, verbatim. This means that the kernel buffer may now contain entirely invalid state on which XRSTOR will #GP. validate_user_xstate_header() can detect some of that corruption, but that leaves the onus on callers to clear the buffer. Prior to XSAVES support, it was possible just to reinitialize the buffer, completely, but with supervisor states that is not longer possible as the buffer clearing code split got it backwards. Fixing that is possible but not corrupting the state in the first place is more robust. Avoid corruption of the kernel XSAVE buffer by using copy_user_to_xstate() which validates the XSAVE header contents before copying the actual states to the kernel. copy_user_to_xstate() was previously only called for compacted-format kernel buffers, but it works for both compacted and non-compacted forms. Using it for the non-compacted form is slower because of multiple __copy_from_user() operations, but that cost is less important than robust code in an already slow path. [ Changelog polished by Dave Hansen ] |
| CVE-2021-47226 | In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Invalidate FPU state after a failed XRSTOR from a user buffer Both Intel and AMD consider it to be architecturally valid for XRSTOR to fail with #PF but nonetheless change the register state. The actual conditions under which this might occur are unclear [1], but it seems plausible that this might be triggered if one sibling thread unmaps a page and invalidates the shared TLB while another sibling thread is executing XRSTOR on the page in question. __fpu__restore_sig() can execute XRSTOR while the hardware registers are preserved on behalf of a different victim task (using the fpu_fpregs_owner_ctx mechanism), and, in theory, XRSTOR could fail but modify the registers. If this happens, then there is a window in which __fpu__restore_sig() could schedule out and the victim task could schedule back in without reloading its own FPU registers. This would result in part of the FPU state that __fpu__restore_sig() was attempting to load leaking into the victim task's user-visible state. Invalidate preserved FPU registers on XRSTOR failure to prevent this situation from corrupting any state. [1] Frequent readers of the errata lists might imagine "complex microarchitectural conditions". |
| CVE-2021-47225 | In the Linux kernel, the following vulnerability has been resolved: mac80211: fix deadlock in AP/VLAN handling Syzbot reports that when you have AP_VLAN interfaces that are up and close the AP interface they belong to, we get a deadlock. No surprise - since we dev_close() them with the wiphy mutex held, which goes back into the netdev notifier in cfg80211 and tries to acquire the wiphy mutex there. To fix this, we need to do two things: 1) prevent changing iftype while AP_VLANs are up, we can't easily fix this case since cfg80211 already calls us with the wiphy mutex held, but change_interface() is relatively rare in drivers anyway, so changing iftype isn't used much (and userspace has to fall back to down/change/up anyway) 2) pull the dev_close() loop over VLANs out of the wiphy mutex section in the normal stop case |
| CVE-2021-47224 | In the Linux kernel, the following vulnerability has been resolved: net: ll_temac: Make sure to free skb when it is completely used With the skb pointer piggy-backed on the TX BD, we have a simple and efficient way to free the skb buffer when the frame has been transmitted. But in order to avoid freeing the skb while there are still fragments from the skb in use, we need to piggy-back on the TX BD of the skb, not the first. Without this, we are doing use-after-free on the DMA side, when the first BD of a multi TX BD packet is seen as completed in xmit_done, and the remaining BDs are still being processed. |
| CVE-2021-47223 | In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst null pointer dereference This patch fixes a tunnel_dst null pointer dereference due to lockless access in the tunnel egress path. When deleting a vlan tunnel the tunnel_dst pointer is set to NULL without waiting a grace period (i.e. while it's still usable) and packets egressing are dereferencing it without checking. Use READ/WRITE_ONCE to annotate the lockless use of tunnel_id, use RCU for accessing tunnel_dst and make sure it is read only once and checked in the egress path. The dst is already properly RCU protected so we don't need to do anything fancy than to make sure tunnel_id and tunnel_dst are read only once and checked in the egress path. |
| CVE-2021-47222 | In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst refcnt when egressing The egress tunnel code uses dst_clone() and directly sets the result which is wrong because the entry might have 0 refcnt or be already deleted, causing number of problems. It also triggers the WARN_ON() in dst_hold()[1] when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and checking if a reference was actually taken before setting the dst. [1] dmesg WARN_ON log and following refcnt errors WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G W 5.13.0-rc3+ #360 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49 RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0 RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401 FS: 0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0 Call Trace: br_handle_vlan+0xbc/0xca [bridge] __br_forward+0x23/0x164 [bridge] deliver_clone+0x41/0x48 [bridge] br_handle_frame_finish+0x36f/0x3aa [bridge] ? skb_dst+0x2e/0x38 [bridge] ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge] ? br_handle_frame_finish+0x3aa/0x3aa [bridge] br_handle_frame+0x2c3/0x377 [bridge] ? __skb_pull+0x33/0x51 ? vlan_do_receive+0x4f/0x36a ? br_handle_frame_finish+0x3aa/0x3aa [bridge] __netif_receive_skb_core+0x539/0x7c6 ? __list_del_entry_valid+0x16e/0x1c2 __netif_receive_skb_list_core+0x6d/0xd6 netif_receive_skb_list_internal+0x1d9/0x1fa gro_normal_list+0x22/0x3e dev_gro_receive+0x55b/0x600 ? detach_buf_split+0x58/0x140 napi_gro_receive+0x94/0x12e virtnet_poll+0x15d/0x315 [virtio_net] __napi_poll+0x2c/0x1c9 net_rx_action+0xe6/0x1fb __do_softirq+0x115/0x2d8 run_ksoftirqd+0x18/0x20 smpboot_thread_fn+0x183/0x19c ? smpboot_unregister_percpu_thread+0x66/0x66 kthread+0x10a/0x10f ? kthread_mod_delayed_work+0xb6/0xb6 ret_from_fork+0x22/0x30 ---[ end trace 49f61b07f775fd2b ]--- dst_release: dst:00000000c02d677a refcnt:-1 dst_release underflow |
| CVE-2021-47221 | In the Linux kernel, the following vulnerability has been resolved: mm/slub: actually fix freelist pointer vs redzoning It turns out that SLUB redzoning ("slub_debug=Z") checks from s->object_size rather than from s->inuse (which is normally bumped to make room for the freelist pointer), so a cache created with an object size less than 24 would have the freelist pointer written beyond s->object_size, causing the redzone to be corrupted by the freelist pointer. This was very visible with "slub_debug=ZF": BUG test (Tainted: G B ): Right Redzone overwritten ----------------------------------------------------------------------------- INFO: 0xffff957ead1c05de-0xffff957ead1c05df @offset=1502. First byte 0x1a instead of 0xbb INFO: Slab 0xffffef3950b47000 objects=170 used=170 fp=0x0000000000000000 flags=0x8000000000000200 INFO: Object 0xffff957ead1c05d8 @offset=1496 fp=0xffff957ead1c0620 Redzone (____ptrval____): bb bb bb bb bb bb bb bb ........ Object (____ptrval____): 00 00 00 00 00 f6 f4 a5 ........ Redzone (____ptrval____): 40 1d e8 1a aa @.... Padding (____ptrval____): 00 00 00 00 00 00 00 00 ........ Adjust the offset to stay within s->object_size. (Note that no caches of in this size range are known to exist in the kernel currently.) |
| CVE-2021-47219 | In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs() The following issue was observed running syzkaller: BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline] BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831 Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815 CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe4/0x14a lib/dump_stack.c:118 print_address_description+0x73/0x280 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:352 [inline] kasan_report+0x272/0x370 mm/kasan/report.c:410 memcpy+0x1f/0x50 mm/kasan/kasan.c:302 memcpy include/linux/string.h:377 [inline] sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831 fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021 resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772 schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429 scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835 scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896 scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034 __blk_run_queue_uncond block/blk-core.c:464 [inline] __blk_run_queue+0x1a4/0x380 block/blk-core.c:484 blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78 sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847 sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716 sg_write+0x64/0xa0 drivers/scsi/sg.c:622 __vfs_write+0xed/0x690 fs/read_write.c:485 kill_bdev:block_device:00000000e138492c vfs_write+0x184/0x4c0 fs/read_write.c:549 ksys_write+0x107/0x240 fs/read_write.c:599 do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe We get 'alen' from command its type is int. If userspace passes a large length we will get a negative 'alen'. Switch n, alen, and rlen to u32. |
| CVE-2021-47218 | In the Linux kernel, the following vulnerability has been resolved: selinux: fix NULL-pointer dereference when hashtab allocation fails When the hash table slot array allocation fails in hashtab_init(), h->size is left initialized with a non-zero value, but the h->htable pointer is NULL. This may then cause a NULL pointer dereference, since the policydb code relies on the assumption that even after a failed hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called on it. Yet, these detect an empty hashtab only by looking at the size. Fix this by making sure that hashtab_init() always leaves behind a valid empty hashtab when the allocation fails. |
| CVE-2021-47217 | In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails Check for a valid hv_vp_index array prior to derefencing hv_vp_index when setting Hyper-V's TSC change callback. If Hyper-V setup failed in hyperv_init(), the kernel will still report that it's running under Hyper-V, but will have silently disabled nearly all functionality. BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc2+ #75 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:set_hv_tscchange_cb+0x15/0xa0 Code: <8b> 04 82 8b 15 12 17 85 01 48 c1 e0 20 48 0d ee 00 01 00 f6 c6 08 ... Call Trace: kvm_arch_init+0x17c/0x280 kvm_init+0x31/0x330 vmx_init+0xba/0x13a do_one_initcall+0x41/0x1c0 kernel_init_freeable+0x1f2/0x23b kernel_init+0x16/0x120 ret_from_fork+0x22/0x30 |
| CVE-2021-47216 | In the Linux kernel, the following vulnerability has been resolved: scsi: advansys: Fix kernel pointer leak Pointers should be printed with %p or %px rather than cast to 'unsigned long' and printed with %lx. Change %lx to %p to print the hashed pointer. |
| CVE-2021-47215 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: kTLS, Fix crash in RX resync flow For the TLS RX resync flow, we maintain a list of TLS contexts that require some attention, to communicate their resync information to the HW. Here we fix list corruptions, by protecting the entries against movements coming from resync_handle_seq_match(), until their resync handling in napi is fully completed. |
| CVE-2021-47214 | In the Linux kernel, the following vulnerability has been resolved: hugetlb, userfaultfd: fix reservation restore on userfaultfd error Currently in the is_continue case in hugetlb_mcopy_atomic_pte(), if we bail out using "goto out_release_unlock;" in the cases where idx >= size, or !huge_pte_none(), the code will detect that new_pagecache_page == false, and so call restore_reserve_on_error(). In this case I see restore_reserve_on_error() delete the reservation, and the following call to remove_inode_hugepages() will increment h->resv_hugepages causing a 100% reproducible leak. We should treat the is_continue case similar to adding a page into the pagecache and set new_pagecache_page to true, to indicate that there is no reservation to restore on the error path, and we need not call restore_reserve_on_error(). Rename new_pagecache_page to page_in_pagecache to make that clear. |
| CVE-2021-47212 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Update error handler for UCTX and UMEM In the fast unload flow, the device state is set to internal error, which indicates that the driver started the destroy process. In this case, when a destroy command is being executed, it should return MLX5_CMD_STAT_OK. Fix MLX5_CMD_OP_DESTROY_UCTX and MLX5_CMD_OP_DESTROY_UMEM to return OK instead of EIO. This fixes a call trace in the umem release process - [ 2633.536695] Call Trace: [ 2633.537518] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs] [ 2633.538596] remove_client_context+0x8b/0xd0 [ib_core] [ 2633.539641] disable_device+0x8c/0x130 [ib_core] [ 2633.540615] __ib_unregister_device+0x35/0xa0 [ib_core] [ 2633.541640] ib_unregister_device+0x21/0x30 [ib_core] [ 2633.542663] __mlx5_ib_remove+0x38/0x90 [mlx5_ib] [ 2633.543640] auxiliary_bus_remove+0x1e/0x30 [auxiliary] [ 2633.544661] device_release_driver_internal+0x103/0x1f0 [ 2633.545679] bus_remove_device+0xf7/0x170 [ 2633.546640] device_del+0x181/0x410 [ 2633.547606] mlx5_rescan_drivers_locked.part.10+0x63/0x160 [mlx5_core] [ 2633.548777] mlx5_unregister_device+0x27/0x40 [mlx5_core] [ 2633.549841] mlx5_uninit_one+0x21/0xc0 [mlx5_core] [ 2633.550864] remove_one+0x69/0xe0 [mlx5_core] [ 2633.551819] pci_device_remove+0x3b/0xc0 [ 2633.552731] device_release_driver_internal+0x103/0x1f0 [ 2633.553746] unbind_store+0xf6/0x130 [ 2633.554657] kernfs_fop_write+0x116/0x190 [ 2633.555567] vfs_write+0xa5/0x1a0 [ 2633.556407] ksys_write+0x4f/0xb0 [ 2633.557233] do_syscall_64+0x5b/0x1a0 [ 2633.558071] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 2633.559018] RIP: 0033:0x7f9977132648 [ 2633.559821] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 55 6f 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55 [ 2633.562332] RSP: 002b:00007fffb1a83888 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2633.563472] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f9977132648 [ 2633.564541] RDX: 000000000000000c RSI: 000055b90546e230 RDI: 0000000000000001 [ 2633.565596] RBP: 000055b90546e230 R08: 00007f9977406860 R09: 00007f9977a54740 [ 2633.566653] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f99774056e0 [ 2633.567692] R13: 000000000000000c R14: 00007f9977400880 R15: 000000000000000c [ 2633.568725] ---[ end trace 10b4fe52945e544d ]--- |
| CVE-2021-47211 | In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix null pointer dereference on pointer cs_desc The pointer cs_desc return from snd_usb_find_clock_source could be null, so there is a potential null pointer dereference issue. Fix this by adding a null check before dereference. |
| CVE-2021-47210 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tipd: Remove WARN_ON in tps6598x_block_read Calling tps6598x_block_read with a higher than allowed len can be handled by just returning an error. There's no need to crash systems with panic-on-warn enabled. |
| CVE-2021-47209 | In the Linux kernel, the following vulnerability has been resolved: sched/fair: Prevent dead task groups from regaining cfs_rq's Kevin is reporting crashes which point to a use-after-free of a cfs_rq in update_blocked_averages(). Initial debugging revealed that we've live cfs_rq's (on_list=1) in an about to be kfree()'d task group in free_fair_sched_group(). However, it was unclear how that can happen. His kernel config happened to lead to a layout of struct sched_entity that put the 'my_q' member directly into the middle of the object which makes it incidentally overlap with SLUB's freelist pointer. That, in combination with SLAB_FREELIST_HARDENED's freelist pointer mangling, leads to a reliable access violation in form of a #GP which made the UAF fail fast. Michal seems to have run into the same issue[1]. He already correctly diagnosed that commit a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle") is causing the preconditions for the UAF to happen by re-adding cfs_rq's also to task groups that have no more running tasks, i.e. also to dead ones. His analysis, however, misses the real root cause and it cannot be seen from the crash backtrace only, as the real offender is tg_unthrottle_up() getting called via sched_cfs_period_timer() via the timer interrupt at an inconvenient time. When unregister_fair_sched_group() unlinks all cfs_rq's from the dying task group, it doesn't protect itself from getting interrupted. If the timer interrupt triggers while we iterate over all CPUs or after unregister_fair_sched_group() has finished but prior to unlinking the task group, sched_cfs_period_timer() will execute and walk the list of task groups, trying to unthrottle cfs_rq's, i.e. re-add them to the dying task group. These will later -- in free_fair_sched_group() -- be kfree()'ed while still being linked, leading to the fireworks Kevin and Michal are seeing. To fix this race, ensure the dying task group gets unlinked first. However, simply switching the order of unregistering and unlinking the task group isn't sufficient, as concurrent RCU walkers might still see it, as can be seen below: CPU1: CPU2: : timer IRQ: : do_sched_cfs_period_timer(): : : : distribute_cfs_runtime(): : rcu_read_lock(); : : : unthrottle_cfs_rq(): sched_offline_group(): : : walk_tg_tree_from(…,tg_unthrottle_up,…): list_del_rcu(&tg->list); : (1) : list_for_each_entry_rcu(child, &parent->children, siblings) : : (2) list_del_rcu(&tg->siblings); : : tg_unthrottle_up(): unregister_fair_sched_group(): struct cfs_rq *cfs_rq = tg->cfs_rq[cpu_of(rq)]; : : list_del_leaf_cfs_rq(tg->cfs_rq[cpu]); : : : : if (!cfs_rq_is_decayed(cfs_rq) || cfs_rq->nr_running) (3) : list_add_leaf_cfs_rq(cfs_rq); : : : : : : : : : ---truncated--- |
| CVE-2021-47207 | In the Linux kernel, the following vulnerability has been resolved: ALSA: gus: fix null pointer dereference on pointer block The pointer block return from snd_gf1_dma_next_block could be null, so there is a potential null pointer dereference issue. Fix this by adding a null check before dereference. |
| CVE-2021-47206 | In the Linux kernel, the following vulnerability has been resolved: usb: host: ohci-tmio: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. |
| CVE-2021-47205 | In the Linux kernel, the following vulnerability has been resolved: clk: sunxi-ng: Unregister clocks/resets when unbinding Currently, unbinding a CCU driver unmaps the device's MMIO region, while leaving its clocks/resets and their providers registered. This can cause a page fault later when some clock operation tries to perform MMIO. Fix this by separating the CCU initialization from the memory allocation, and then using a devres callback to unregister the clocks and resets. This also fixes a memory leak of the `struct ccu_reset`, and uses the correct owner (the specific platform driver) for the clocks and resets. Early OF clock providers are never unregistered, and limited error handling is possible, so they are mostly unchanged. The error reporting is made more consistent by moving the message inside of_sunxi_ccu_probe. |
| CVE-2021-47204 | In the Linux kernel, the following vulnerability has been resolved: net: dpaa2-eth: fix use-after-free in dpaa2_eth_remove Access to netdev after free_netdev() will cause use-after-free bug. Move debug log before free_netdev() call to avoid it. |
| CVE-2021-47203 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq() When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass the requests to the adapter. If such an attempt fails, a local "fail_msg" string is set and a log message output. The job is then added to a completions list for cancellation. Processing of any further jobs from the txq list continues, but since "fail_msg" remains set, jobs are added to the completions list regardless of whether a wqe was passed to the adapter. If successfully added to txcmplq, jobs are added to both lists resulting in list corruption. Fix by clearing the fail_msg string after adding a job to the completions list. This stops the subsequent jobs from being added to the completions list unless they had an appropriate failure. |
| CVE-2021-47202 | In the Linux kernel, the following vulnerability has been resolved: thermal: Fix NULL pointer dereferences in of_thermal_ functions of_parse_thermal_zones() parses the thermal-zones node and registers a thermal_zone device for each subnode. However, if a thermal zone is consuming a thermal sensor and that thermal sensor device hasn't probed yet, an attempt to set trip_point_*_temp for that thermal zone device can cause a NULL pointer dereference. Fix it. console:/sys/class/thermal/thermal_zone87 # echo 120000 > trip_point_0_temp ... Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... Call trace: of_thermal_set_trip_temp+0x40/0xc4 trip_point_temp_store+0xc0/0x1dc dev_attr_store+0x38/0x88 sysfs_kf_write+0x64/0xc0 kernfs_fop_write_iter+0x108/0x1d0 vfs_write+0x2f4/0x368 ksys_write+0x7c/0xec __arm64_sys_write+0x20/0x30 el0_svc_common.llvm.7279915941325364641+0xbc/0x1bc do_el0_svc+0x28/0xa0 el0_svc+0x14/0x24 el0_sync_handler+0x88/0xec el0_sync+0x1c0/0x200 While at it, fix the possible NULL pointer dereference in other functions as well: of_thermal_get_temp(), of_thermal_set_emul_temp(), of_thermal_get_trend(). |
| CVE-2021-47201 | In the Linux kernel, the following vulnerability has been resolved: iavf: free q_vectors before queues in iavf_disable_vf iavf_free_queues() clears adapter->num_active_queues, which iavf_free_q_vectors() relies on, so swap the order of these two function calls in iavf_disable_vf(). This resolves a panic encountered when the interface is disabled and then later brought up again after PF communication is restored. |
| CVE-2021-47200 | In the Linux kernel, the following vulnerability has been resolved: drm/prime: Fix use after free in mmap with drm_gem_ttm_mmap drm_gem_ttm_mmap() drops a reference to the gem object on success. If the gem object's refcount == 1 on entry to drm_gem_prime_mmap(), that drop will free the gem object, and the subsequent drm_gem_object_get() will be a UAF. Fix by grabbing a reference before calling the mmap helper. This issue was forseen when the reference dropping was adding in commit 9786b65bc61ac ("drm/ttm: fix mmap refcounting"): "For that to work properly the drm_gem_object_get() call in drm_gem_ttm_mmap() must be moved so it happens before calling obj->funcs->mmap(), otherwise the gem refcount would go down to zero." |
| CVE-2021-47199 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: CT, Fix multiple allocations and memleak of mod acts CT clear action offload adds additional mod hdr actions to the flow's original mod actions in order to clear the registers which hold ct_state. When such flow also includes encap action, a neigh update event can cause the driver to unoffload the flow and then reoffload it. Each time this happens, the ct clear handling adds that same set of mod hdr actions to reset ct_state until the max of mod hdr actions is reached. Also the driver never releases the allocated mod hdr actions and causing a memleak. Fix above two issues by moving CT clear mod acts allocation into the parsing actions phase and only use it when offloading the rule. The release of mod acts will be done in the normal flow_put(). backtrace: [<000000007316e2f3>] krealloc+0x83/0xd0 [<00000000ef157de1>] mlx5e_mod_hdr_alloc+0x147/0x300 [mlx5_core] [<00000000970ce4ae>] mlx5e_tc_match_to_reg_set_and_get_id+0xd7/0x240 [mlx5_core] [<0000000067c5fa17>] mlx5e_tc_match_to_reg_set+0xa/0x20 [mlx5_core] [<00000000d032eb98>] mlx5_tc_ct_entry_set_registers.isra.0+0x36/0xc0 [mlx5_core] [<00000000fd23b869>] mlx5_tc_ct_flow_offload+0x272/0x1f10 [mlx5_core] [<000000004fc24acc>] mlx5e_tc_offload_fdb_rules.part.0+0x150/0x620 [mlx5_core] [<00000000dc741c17>] mlx5e_tc_encap_flows_add+0x489/0x690 [mlx5_core] [<00000000e92e49d7>] mlx5e_rep_update_flows+0x6e4/0x9b0 [mlx5_core] [<00000000f60f5602>] mlx5e_rep_neigh_update+0x39a/0x5d0 [mlx5_core] |
| CVE-2021-47198 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine An error is detected with the following report when unloading the driver: "KASAN: use-after-free in lpfc_unreg_rpi+0x1b1b" The NLP_REG_LOGIN_SEND nlp_flag is set in lpfc_reg_fab_ctrl_node(), but the flag is not cleared upon completion of the login. This allows a second call to lpfc_unreg_rpi() to proceed with nlp_rpi set to LPFC_RPI_ALLOW_ERROR. This results in a use after free access when used as an rpi_ids array index. Fix by clearing the NLP_REG_LOGIN_SEND nlp_flag in lpfc_mbx_cmpl_fc_reg_login(). |
| CVE-2021-47197 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: nullify cq->dbg pointer in mlx5_debug_cq_remove() Prior to this patch in case mlx5_core_destroy_cq() failed it proceeds to rest of destroy operations. mlx5_core_destroy_cq() could be called again by user and cause additional call of mlx5_debug_cq_remove(). cq->dbg was not nullify in previous call and cause the crash. Fix it by nullify cq->dbg pointer after removal. Also proceed to destroy operations only if FW return 0 for MLX5_CMD_OP_DESTROY_CQ command. general protection fault, probably for non-canonical address 0x2000300004058: 0000 [#1] SMP PTI CPU: 5 PID: 1228 Comm: python Not tainted 5.15.0-rc5_for_upstream_min_debug_2021_10_14_11_06 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:lockref_get+0x1/0x60 Code: 5d e9 53 ff ff ff 48 8d 7f 70 e8 0a 2e 48 00 c7 85 d0 00 00 00 02 00 00 00 c6 45 70 00 fb 5d c3 c3 cc cc cc cc cc cc cc cc 53 <48> 8b 17 48 89 fb 85 d2 75 3d 48 89 d0 bf 64 00 00 00 48 89 c1 48 RSP: 0018:ffff888137dd7a38 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff888107d5f458 RCX: 00000000fffffffe RDX: 000000000002c2b0 RSI: ffffffff8155e2e0 RDI: 0002000300004058 RBP: ffff888137dd7a88 R08: 0002000300004058 R09: ffff8881144a9f88 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881141d4000 R13: ffff888137dd7c68 R14: ffff888137dd7d58 R15: ffff888137dd7cc0 FS: 00007f4644f2a4c0(0000) GS:ffff8887a2d40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b4500f4380 CR3: 0000000114f7a003 CR4: 0000000000170ea0 Call Trace: simple_recursive_removal+0x33/0x2e0 ? debugfs_remove+0x60/0x60 debugfs_remove+0x40/0x60 mlx5_debug_cq_remove+0x32/0x70 [mlx5_core] mlx5_core_destroy_cq+0x41/0x1d0 [mlx5_core] devx_obj_cleanup+0x151/0x330 [mlx5_ib] ? __pollwait+0xd0/0xd0 ? xas_load+0x5/0x70 ? xa_load+0x62/0xa0 destroy_hw_idr_uobject+0x20/0x80 [ib_uverbs] uverbs_destroy_uobject+0x3b/0x360 [ib_uverbs] uobj_destroy+0x54/0xa0 [ib_uverbs] ib_uverbs_cmd_verbs+0xaf2/0x1160 [ib_uverbs] ? uverbs_finalize_object+0xd0/0xd0 [ib_uverbs] ib_uverbs_ioctl+0xc4/0x1b0 [ib_uverbs] __x64_sys_ioctl+0x3e4/0x8e0 |
| CVE-2021-47196 | In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Set send and receive CQ before forwarding to the driver Preset both receive and send CQ pointers prior to call to the drivers and overwrite it later again till the mlx4 is going to be changed do not overwrite ibqp properties. This change is needed for mlx5, because in case of QP creation failure, it will go to the path of QP destroy which relies on proper CQ pointers. BUG: KASAN: use-after-free in create_qp.cold+0x164/0x16e [mlx5_ib] Write of size 8 at addr ffff8880064c55c0 by task a.out/246 CPU: 0 PID: 246 Comm: a.out Not tainted 5.15.0+ #291 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x83/0xdf create_qp.cold+0x164/0x16e [mlx5_ib] mlx5_ib_create_qp+0x358/0x28a0 [mlx5_ib] create_qp.part.0+0x45b/0x6a0 [ib_core] ib_create_qp_user+0x97/0x150 [ib_core] ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs] ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs] ib_uverbs_ioctl+0x169/0x260 [ib_uverbs] __x64_sys_ioctl+0x866/0x14d0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Allocated by task 246: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0xa4/0xd0 create_qp.part.0+0x92/0x6a0 [ib_core] ib_create_qp_user+0x97/0x150 [ib_core] ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs] ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs] ib_uverbs_ioctl+0x169/0x260 [ib_uverbs] __x64_sys_ioctl+0x866/0x14d0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 246: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x10c/0x150 slab_free_freelist_hook+0xb4/0x1b0 kfree+0xe7/0x2a0 create_qp.part.0+0x52b/0x6a0 [ib_core] ib_create_qp_user+0x97/0x150 [ib_core] ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs] ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs] ib_uverbs_ioctl+0x169/0x260 [ib_uverbs] __x64_sys_ioctl+0x866/0x14d0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47195 | In the Linux kernel, the following vulnerability has been resolved: spi: fix use-after-free of the add_lock mutex Commit 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on SPI buses") introduced a per-controller mutex. But mutex_unlock() of said lock is called after the controller is already freed: spi_unregister_controller(ctlr) -> put_device(&ctlr->dev) -> spi_controller_release(dev) -> mutex_unlock(&ctrl->add_lock) Move the put_device() after the mutex_unlock(). |
| CVE-2021-47194 | In the Linux kernel, the following vulnerability has been resolved: cfg80211: call cfg80211_stop_ap when switch from P2P_GO type If the userspace tools switch from NL80211_IFTYPE_P2P_GO to NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it does not call the cleanup cfg80211_stop_ap(), this leads to the initialization of in-use data. For example, this path re-init the sdata->assigned_chanctx_list while it is still an element of assigned_vifs list, and makes that linked list corrupt. |
| CVE-2021-47193 | In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Fix memory leak during rmmod Driver failed to release all memory allocated. This would lead to memory leak during driver removal. Properly free memory when the module is removed. |
| CVE-2021-47192 | In the Linux kernel, the following vulnerability has been resolved: scsi: core: sysfs: Fix hang when device state is set via sysfs This fixes a regression added with: commit f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device") The problem is that after iSCSI recovery, iscsid will call into the kernel to set the dev's state to running, and with that patch we now call scsi_rescan_device() with the state_mutex held. If the SCSI error handler thread is just starting to test the device in scsi_send_eh_cmnd() then it's going to try to grab the state_mutex. We are then stuck, because when scsi_rescan_device() tries to send its I/O scsi_queue_rq() calls -> scsi_host_queue_ready() -> scsi_host_in_recovery() which will return true (the host state is still in recovery) and I/O will just be requeued. scsi_send_eh_cmnd() will then never be able to grab the state_mutex to finish error handling. To prevent the deadlock move the rescan-related code to after we drop the state_mutex. This also adds a check for if we are already in the running state. This prevents extra scans and helps the iscsid case where if the transport class has already onlined the device during its recovery process then we don't need userspace to do it again plus possibly block that daemon. |
| CVE-2021-47191 | In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix out-of-bound read in resp_readcap16() The following warning was observed running syzkaller: [ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in; [ 3813.830724] program syz-executor not setting count and/or reply_len properly [ 3813.836956] ================================================================== [ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0 [ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549 [ 3813.846612] Call Trace: [ 3813.846995] dump_stack+0x108/0x15f [ 3813.847524] print_address_description+0xa5/0x372 [ 3813.848243] kasan_report.cold+0x236/0x2a8 [ 3813.849439] check_memory_region+0x240/0x270 [ 3813.850094] memcpy+0x30/0x80 [ 3813.850553] sg_copy_buffer+0x157/0x1e0 [ 3813.853032] sg_copy_from_buffer+0x13/0x20 [ 3813.853660] fill_from_dev_buffer+0x135/0x370 [ 3813.854329] resp_readcap16+0x1ac/0x280 [ 3813.856917] schedule_resp+0x41f/0x1630 [ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0 [ 3813.862699] scsi_dispatch_cmd+0x330/0x950 [ 3813.863329] scsi_request_fn+0xd8e/0x1710 [ 3813.863946] __blk_run_queue+0x10b/0x230 [ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400 [ 3813.865220] sg_common_write.isra.0+0xe61/0x2420 [ 3813.871637] sg_write+0x6c8/0xef0 [ 3813.878853] __vfs_write+0xe4/0x800 [ 3813.883487] vfs_write+0x17b/0x530 [ 3813.884008] ksys_write+0x103/0x270 [ 3813.886268] __x64_sys_write+0x77/0xc0 [ 3813.886841] do_syscall_64+0x106/0x360 [ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9 This issue can be reproduced with the following syzkaller log: r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0) r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00') open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000) r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782) write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126) In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This leads to OOB in sg_copy_buffer(). To solve this issue, define alloc_len as u32. |
| CVE-2021-47190 | In the Linux kernel, the following vulnerability has been resolved: perf bpf: Avoid memory leak from perf_env__insert_btf() perf_env__insert_btf() doesn't insert if a duplicate BTF id is encountered and this causes a memory leak. Modify the function to return a success/error value and then free the memory if insertion didn't happen. v2. Adds a return -1 when the insertion error occurs in perf_env__fetch_btf. This doesn't affect anything as the result is never checked. |
| CVE-2021-47189 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix memory ordering between normal and ordered work functions Ordered work functions aren't guaranteed to be handled by the same thread which executed the normal work functions. The only way execution between normal/ordered functions is synchronized is via the WORK_DONE_BIT, unfortunately the used bitops don't guarantee any ordering whatsoever. This manifested as seemingly inexplicable crashes on ARM64, where async_chunk::inode is seen as non-null in async_cow_submit which causes submit_compressed_extents to be called and crash occurs because async_chunk::inode suddenly became NULL. The call trace was similar to: pc : submit_compressed_extents+0x38/0x3d0 lr : async_cow_submit+0x50/0xd0 sp : ffff800015d4bc20 <registers omitted for brevity> Call trace: submit_compressed_extents+0x38/0x3d0 async_cow_submit+0x50/0xd0 run_ordered_work+0xc8/0x280 btrfs_work_helper+0x98/0x250 process_one_work+0x1f0/0x4ac worker_thread+0x188/0x504 kthread+0x110/0x114 ret_from_fork+0x10/0x18 Fix this by adding respective barrier calls which ensure that all accesses preceding setting of WORK_DONE_BIT are strictly ordered before setting the flag. At the same time add a read barrier after reading of WORK_DONE_BIT in run_ordered_work which ensures all subsequent loads would be strictly ordered after reading the bit. This in turn ensures are all accesses before WORK_DONE_BIT are going to be strictly ordered before any access that can occur in ordered_func. |
| CVE-2021-47188 | In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Improve SCSI abort handling The following has been observed on a test setup: WARNING: CPU: 4 PID: 250 at drivers/scsi/ufs/ufshcd.c:2737 ufshcd_queuecommand+0x468/0x65c Call trace: ufshcd_queuecommand+0x468/0x65c scsi_send_eh_cmnd+0x224/0x6a0 scsi_eh_test_devices+0x248/0x418 scsi_eh_ready_devs+0xc34/0xe58 scsi_error_handler+0x204/0x80c kthread+0x150/0x1b4 ret_from_fork+0x10/0x30 That warning is triggered by the following statement: WARN_ON(lrbp->cmd); Fix this warning by clearing lrbp->cmd from the abort handler. |
| CVE-2021-47187 | In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency The entry/exit latency and minimum residency in state for the idle states of MSM8998 were ..bad: first of all, for all of them the timings were written for CPU sleep but the min-residency-us param was miscalculated (supposedly, while porting this from downstream); Then, the power collapse states are setting PC on both the CPU cluster *and* the L2 cache, which have different timings: in the specific case of L2 the times are higher so these ones should be taken into account instead of the CPU ones. This parameter misconfiguration was not giving particular issues because on MSM8998 there was no CPU scaling at all, so cluster/L2 power collapse was rarely (if ever) hit. When CPU scaling is enabled, though, the wrong timings will produce SoC unstability shown to the user as random, apparently error-less, sudden reboots and/or lockups. This set of parameters are stabilizing the SoC when CPU scaling is ON and when power collapse is frequently hit. |
| CVE-2021-47186 | In the Linux kernel, the following vulnerability has been resolved: tipc: check for null after calling kmemdup kmemdup can return a null pointer so need to check for it, otherwise the null key will be dereferenced later in tipc_crypto_key_xmit as can be seen in the trace [1]. [1] https://syzkaller.appspot.com/bug?id=bca180abb29567b189efdbdb34cbf7ba851c2a58 |
| CVE-2021-47185 | In the Linux kernel, the following vulnerability has been resolved: tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup, which look like this one: Workqueue: events_unbound flush_to_ldisc Call trace: dump_backtrace+0x0/0x1ec show_stack+0x24/0x30 dump_stack+0xd0/0x128 panic+0x15c/0x374 watchdog_timer_fn+0x2b8/0x304 __run_hrtimer+0x88/0x2c0 __hrtimer_run_queues+0xa4/0x120 hrtimer_interrupt+0xfc/0x270 arch_timer_handler_phys+0x40/0x50 handle_percpu_devid_irq+0x94/0x220 __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x84/0xfc el1_irq+0xc8/0x180 slip_unesc+0x80/0x214 [slip] tty_ldisc_receive_buf+0x64/0x80 tty_port_default_receive_buf+0x50/0x90 flush_to_ldisc+0xbc/0x110 process_one_work+0x1d4/0x4b0 worker_thread+0x180/0x430 kthread+0x11c/0x120 In the testcase pty04, The first process call the write syscall to send data to the pty master. At the same time, the workqueue will do the flush_to_ldisc to pop data in a loop until there is no more data left. When the sender and workqueue running in different core, the sender sends data fastly in full time which will result in workqueue doing work in loop for a long time and occuring softlockup in flush_to_ldisc with kernel configured without preempt. So I add need_resched check and cond_resched in the flush_to_ldisc loop to avoid it. |
| CVE-2021-47184 | In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL ptr dereference on VSI filter sync Remove the reason of null pointer dereference in sync VSI filters. Added new I40E_VSI_RELEASING flag to signalize deleting and releasing of VSI resources to sync this thread with sync filters subtask. Without this patch it is possible to start update the VSI filter list after VSI is removed, that's causing a kernel oops. |
| CVE-2021-47183 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix link down processing to address NULL pointer dereference If an FC link down transition while PLOGIs are outstanding to fabric well known addresses, outstanding ABTS requests may result in a NULL pointer dereference. Driver unload requests may hang with repeated "2878" log messages. The Link down processing results in ABTS requests for outstanding ELS requests. The Abort WQEs are sent for the ELSs before the driver had set the link state to down. Thus the driver is sending the Abort with the expectation that an ABTS will be sent on the wire. The Abort request is stalled waiting for the link to come up. In some conditions the driver may auto-complete the ELSs thus if the link does come up, the Abort completions may reference an invalid structure. Fix by ensuring that Abort set the flag to avoid link traffic if issued due to conditions where the link failed. |
| CVE-2021-47182 | In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix scsi_mode_sense() buffer length handling Several problems exist with scsi_mode_sense() buffer length handling: 1) The allocation length field of the MODE SENSE(10) command is 16-bits, occupying bytes 7 and 8 of the CDB. With this command, access to mode pages larger than 255 bytes is thus possible. However, the CDB allocation length field is set by assigning len to byte 8 only, thus truncating buffer length larger than 255. 2) If scsi_mode_sense() is called with len smaller than 8 with sdev->use_10_for_ms set, or smaller than 4 otherwise, the buffer length is increased to 8 and 4 respectively, and the buffer is zero filled with these increased values, thus corrupting the memory following the buffer. Fix these 2 problems by using put_unaligned_be16() to set the allocation length field of MODE SENSE(10) CDB and by returning an error when len is too small. Furthermore, if len is larger than 255B, always try MODE SENSE(10) first, even if the device driver did not set sdev->use_10_for_ms. In case of invalid opcode error for MODE SENSE(10), access to mode pages larger than 255 bytes are not retried using MODE SENSE(6). To avoid buffer length overflows for the MODE_SENSE(10) case, check that len is smaller than 65535 bytes. While at it, also fix the folowing: * Use get_unaligned_be16() to retrieve the mode data length and block descriptor length fields of the mode sense reply header instead of using an open coded calculation. * Fix the kdoc dbd argument explanation: the DBD bit stands for Disable Block Descriptor, which is the opposite of what the dbd argument description was. |
| CVE-2021-47181 | In the Linux kernel, the following vulnerability has been resolved: usb: musb: tusb6010: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. |
| CVE-2021-47180 | In the Linux kernel, the following vulnerability has been resolved: NFC: nci: fix memory leak in nci_allocate_device nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev. Fix this by freeing hci_dev in nci_free_device. BUG: memory leak unreferenced object 0xffff888111ea6800 (size 1024): comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff .........`...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline] [<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline] [<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784 [<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline] [<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132 [<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153 [<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345 [<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554 [<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740 [<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846 [<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 [<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914 [<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491 [<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109 [<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164 [<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554 |
| CVE-2021-47179 | In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return() Commit de144ff4234f changes _pnfs_return_layout() to call pnfs_mark_matching_lsegs_return() passing NULL as the struct pnfs_layout_range argument. Unfortunately, pnfs_mark_matching_lsegs_return() doesn't check if we have a value here before dereferencing it, causing an oops. I'm able to hit this crash consistently when running connectathon basic tests on NFS v4.1/v4.2 against Ontap. |
| CVE-2021-47178 | In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Avoid smp_processor_id() in preemptible code The BUG message "BUG: using smp_processor_id() in preemptible [00000000] code" was observed for TCMU devices with kernel config DEBUG_PREEMPT. The message was observed when blktests block/005 was run on TCMU devices with fileio backend or user:zbc backend [1]. The commit 1130b499b4a7 ("scsi: target: tcm_loop: Use LIO wq cmd submission helper") triggered the symptom. The commit modified work queue to handle commands and changed 'current->nr_cpu_allowed' at smp_processor_id() call. The message was also observed at system shutdown when TCMU devices were not cleaned up [2]. The function smp_processor_id() was called in SCSI host work queue for abort handling, and triggered the BUG message. This symptom was observed regardless of the commit 1130b499b4a7 ("scsi: target: tcm_loop: Use LIO wq cmd submission helper"). To avoid the preemptible code check at smp_processor_id(), get CPU ID with raw_smp_processor_id() instead. The CPU ID is used for performance improvement then thread move to other CPU will not affect the code. [1] [ 56.468103] run blktests block/005 at 2021-05-12 14:16:38 [ 57.369473] check_preemption_disabled: 85 callbacks suppressed [ 57.369480] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1511 [ 57.369506] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1510 [ 57.369512] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1506 [ 57.369552] caller is __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369606] CPU: 4 PID: 1506 Comm: fio Not tainted 5.13.0-rc1+ #34 [ 57.369613] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 [ 57.369617] Call Trace: [ 57.369621] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1507 [ 57.369628] dump_stack+0x6d/0x89 [ 57.369642] check_preemption_disabled+0xc8/0xd0 [ 57.369628] caller is __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369655] __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369695] target_init_cmd+0x76/0x90 [target_core_mod] [ 57.369732] tcm_loop_queuecommand+0x109/0x210 [tcm_loop] [ 57.369744] scsi_queue_rq+0x38e/0xc40 [ 57.369761] __blk_mq_try_issue_directly+0x109/0x1c0 [ 57.369779] blk_mq_try_issue_directly+0x43/0x90 [ 57.369790] blk_mq_submit_bio+0x4e5/0x5d0 [ 57.369812] submit_bio_noacct+0x46e/0x4e0 [ 57.369830] __blkdev_direct_IO_simple+0x1a3/0x2d0 [ 57.369859] ? set_init_blocksize.isra.0+0x60/0x60 [ 57.369880] generic_file_read_iter+0x89/0x160 [ 57.369898] blkdev_read_iter+0x44/0x60 [ 57.369906] new_sync_read+0x102/0x170 [ 57.369929] vfs_read+0xd4/0x160 [ 57.369941] __x64_sys_pread64+0x6e/0xa0 [ 57.369946] ? lockdep_hardirqs_on+0x79/0x100 [ 57.369958] do_syscall_64+0x3a/0x70 [ 57.369965] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 57.369973] RIP: 0033:0x7f7ed4c1399f [ 57.369979] Code: 08 89 3c 24 48 89 4c 24 18 e8 7d f3 ff ff 4c 8b 54 24 18 48 8b 54 24 10 41 89 c0 48 8b 74 24 08 8b 3c 24 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 04 24 e8 cd f3 ff ff 48 8b [ 57.369983] RSP: 002b:00007ffd7918c580 EFLAGS: 00000293 ORIG_RAX: 0000000000000011 [ 57.369990] RAX: ffffffffffffffda RBX: 00000000015b4540 RCX: 00007f7ed4c1399f [ 57.369993] RDX: 0000000000001000 RSI: 00000000015de000 RDI: 0000000000000009 [ 57.369996] RBP: 00000000015b4540 R08: 0000000000000000 R09: 0000000000000001 [ 57.369999] R10: 0000000000e5c000 R11: 0000000000000293 R12: 00007f7eb5269a70 [ 57.370002] R13: 0000000000000000 R14: 0000000000001000 R15: 00000000015b4568 [ 57.370031] CPU: 7 PID: 1507 Comm: fio Not tainted 5.13.0-rc1+ #34 [ 57.370036] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 [ 57.370039] Call Trace: [ 57.370045] dump_stack+0x6d/0x89 [ 57.370056] ch ---truncated--- |
| CVE-2021-47177 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix sysfs leak in alloc_iommu() iommu_device_sysfs_add() is called before, so is has to be cleaned on subsequent errors. |
| CVE-2021-47176 | In the Linux kernel, the following vulnerability has been resolved: s390/dasd: add missing discipline function Fix crash with illegal operation exception in dasd_device_tasklet. Commit b72949328869 ("s390/dasd: Prepare for additional path event handling") renamed the verify_path function for ECKD but not for FBA and DIAG. This leads to a panic when the path verification function is called for a FBA or DIAG device. Fix by defining a wrapper function for dasd_generic_verify_path(). |
| CVE-2021-47175 | In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_pie: fix OOB access in the traffic path the following script: # tc qdisc add dev eth0 handle 0x1 root fq_pie flows 2 # tc qdisc add dev eth0 clsact # tc filter add dev eth0 egress matchall action skbedit priority 0x10002 # ping 192.0.2.2 -I eth0 -c2 -w1 -q produces the following splat: BUG: KASAN: slab-out-of-bounds in fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie] Read of size 4 at addr ffff888171306924 by task ping/942 CPU: 3 PID: 942 Comm: ping Not tainted 5.12.0+ #441 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x92/0xc1 print_address_description.constprop.7+0x1a/0x150 kasan_report.cold.13+0x7f/0x111 fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie] __dev_queue_xmit+0x1034/0x2b10 ip_finish_output2+0xc62/0x2120 __ip_finish_output+0x553/0xea0 ip_output+0x1ca/0x4d0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x1c4b/0x2d00 sock_sendmsg+0xdb/0x110 __sys_sendto+0x1d7/0x2b0 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fe69735c3eb Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 75 42 2c 00 41 89 ca 8b 00 85 c0 75 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 41 57 4d 89 c7 41 56 41 89 RSP: 002b:00007fff06d7fb38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055e961413700 RCX: 00007fe69735c3eb RDX: 0000000000000040 RSI: 000055e961413700 RDI: 0000000000000003 RBP: 0000000000000040 R08: 000055e961410500 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff06d81260 R13: 00007fff06d7fb40 R14: 00007fff06d7fc30 R15: 000055e96140f0a0 Allocated by task 917: kasan_save_stack+0x19/0x40 __kasan_kmalloc+0x7f/0xa0 __kmalloc_node+0x139/0x280 fq_pie_init+0x555/0x8e8 [sch_fq_pie] qdisc_create+0x407/0x11b0 tc_modify_qdisc+0x3c2/0x17e0 rtnetlink_rcv_msg+0x346/0x8e0 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888171306800 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 36 bytes to the right of 256-byte region [ffff888171306800, ffff888171306900) The buggy address belongs to the page: page:00000000bcfb624e refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x171306 head:00000000bcfb624e order:1 compound_mapcount:0 flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0010200 dead000000000100 dead000000000122 ffff888100042b40 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888171306800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888171306880: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc >ffff888171306900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888171306980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888171306a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fix fq_pie traffic path to avoid selecting 'q->flows + q->flows_cnt' as a valid flow: it's an address beyond the allocated memory. |
| CVE-2021-47174 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Arturo reported this backtrace: [709732.358791] WARNING: CPU: 3 PID: 456 at arch/x86/kernel/fpu/core.c:128 kernel_fpu_begin_mask+0xae/0xe0 [709732.358793] Modules linked in: binfmt_misc nft_nat nft_chain_nat nf_nat nft_counter nft_ct nf_tables nf_conntrack_netlink nfnetlink 8021q garp stp mrp llc vrf intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul mgag200 ghash_clmulni_intel drm_kms_helper cec aesni_intel drm libaes crypto_simd cryptd glue_helper mei_me dell_smbios iTCO_wdt evdev intel_pmc_bxt iTCO_vendor_support dcdbas pcspkr rapl dell_wmi_descriptor wmi_bmof sg i2c_algo_bit watchdog mei acpi_ipmi ipmi_si button nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipmi_devintf ipmi_msghandler ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor sd_mod t10_pi crc_t10dif crct10dif_generic raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ahci libahci tg3 libata xhci_pci libphy xhci_hcd ptp usbcore crct10dif_pclmul crct10dif_common bnxt_en crc32c_intel scsi_mod [709732.358941] pps_core i2c_i801 lpc_ich i2c_smbus wmi usb_common [709732.358957] CPU: 3 PID: 456 Comm: jbd2/dm-0-8 Not tainted 5.10.0-0.bpo.5-amd64 #1 Debian 5.10.24-1~bpo10+1 [709732.358959] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.9.3 09/23/2020 [709732.358964] RIP: 0010:kernel_fpu_begin_mask+0xae/0xe0 [709732.358969] Code: ae 54 24 04 83 e3 01 75 38 48 8b 44 24 08 65 48 33 04 25 28 00 00 00 75 33 48 83 c4 10 5b c3 65 8a 05 5e 21 5e 76 84 c0 74 92 <0f> 0b eb 8e f0 80 4f 01 40 48 81 c7 00 14 00 00 e8 dd fb ff ff eb [709732.358972] RSP: 0018:ffffbb9700304740 EFLAGS: 00010202 [709732.358976] RAX: 0000000000000001 RBX: 0000000000000003 RCX: 0000000000000001 [709732.358979] RDX: ffffbb9700304970 RSI: ffff922fe1952e00 RDI: 0000000000000003 [709732.358981] RBP: ffffbb9700304970 R08: ffff922fc868a600 R09: ffff922fc711e462 [709732.358984] R10: 000000000000005f R11: ffff922ff0b27180 R12: ffffbb9700304960 [709732.358987] R13: ffffbb9700304b08 R14: ffff922fc664b6c8 R15: ffff922fc664b660 [709732.358990] FS: 0000000000000000(0000) GS:ffff92371fec0000(0000) knlGS:0000000000000000 [709732.358993] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [709732.358996] CR2: 0000557a6655bdd0 CR3: 000000026020a001 CR4: 00000000007706e0 [709732.358999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [709732.359001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [709732.359003] PKRU: 55555554 [709732.359005] Call Trace: [709732.359009] <IRQ> [709732.359035] nft_pipapo_avx2_lookup+0x4c/0x1cba [nf_tables] [709732.359046] ? sched_clock+0x5/0x10 [709732.359054] ? sched_clock_cpu+0xc/0xb0 [709732.359061] ? record_times+0x16/0x80 [709732.359068] ? plist_add+0xc1/0x100 [709732.359073] ? psi_group_change+0x47/0x230 [709732.359079] ? skb_clone+0x4d/0xb0 [709732.359085] ? enqueue_task_rt+0x22b/0x310 [709732.359098] ? bnxt_start_xmit+0x1e8/0xaf0 [bnxt_en] [709732.359102] ? packet_rcv+0x40/0x4a0 [709732.359121] nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359133] nft_do_chain+0x350/0x500 [nf_tables] [709732.359152] ? nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359163] ? nft_do_chain+0x364/0x500 [nf_tables] [709732.359172] ? fib4_rule_action+0x6d/0x80 [709732.359178] ? fib_rules_lookup+0x107/0x250 [709732.359184] nft_nat_do_chain+0x8a/0xf2 [nft_chain_nat] [709732.359193] nf_nat_inet_fn+0xea/0x210 [nf_nat] [709732.359202] nf_nat_ipv4_out+0x14/0xa0 [nf_nat] [709732.359207] nf_hook_slow+0x44/0xc0 [709732.359214] ip_output+0xd2/0x100 [709732.359221] ? __ip_finish_output+0x210/0x210 [709732.359226] ip_forward+0x37d/0x4a0 [709732.359232] ? ip4_key_hashfn+0xb0/0xb0 [709732.359238] ip_subli ---truncated--- |
| CVE-2021-47173 | In the Linux kernel, the following vulnerability has been resolved: misc/uss720: fix memory leak in uss720_probe uss720_probe forgets to decrease the refcount of usbdev in uss720_probe. Fix this by decreasing the refcount of usbdev by usb_put_dev. BUG: memory leak unreferenced object 0xffff888101113800 (size 2048): comm "kworker/0:1", pid 7, jiffies 4294956777 (age 28.870s) hex dump (first 32 bytes): ff ff ff ff 31 00 00 00 00 00 00 00 00 00 00 00 ....1........... 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 ................ backtrace: [<ffffffff82b8e822>] kmalloc include/linux/slab.h:554 [inline] [<ffffffff82b8e822>] kzalloc include/linux/slab.h:684 [inline] [<ffffffff82b8e822>] usb_alloc_dev+0x32/0x450 drivers/usb/core/usb.c:582 [<ffffffff82b98441>] hub_port_connect drivers/usb/core/hub.c:5129 [inline] [<ffffffff82b98441>] hub_port_connect_change drivers/usb/core/hub.c:5363 [inline] [<ffffffff82b98441>] port_event drivers/usb/core/hub.c:5509 [inline] [<ffffffff82b98441>] hub_event+0x1171/0x20c0 drivers/usb/core/hub.c:5591 [<ffffffff81259229>] process_one_work+0x2c9/0x600 kernel/workqueue.c:2275 [<ffffffff81259b19>] worker_thread+0x59/0x5d0 kernel/workqueue.c:2421 [<ffffffff81261228>] kthread+0x178/0x1b0 kernel/kthread.c:292 [<ffffffff8100227f>] ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 |
| CVE-2021-47172 | In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers Channel numbering must start at 0 and then not have any holes, or it is possible to overflow the available storage. Note this bug was introduced as part of a fix to ensure we didn't rely on the ordering of child nodes. So we need to support arbitrary ordering but they all need to be there somewhere. Note I hit this when using qemu to test the rest of this series. Arguably this isn't the best fix, but it is probably the most minimal option for backporting etc. Alexandru's sign-off is here because he carried this patch in a larger set that Jonathan then applied. |
| CVE-2021-47171 | In the Linux kernel, the following vulnerability has been resolved: net: usb: fix memory leak in smsc75xx_bind Syzbot reported memory leak in smsc75xx_bind(). The problem was is non-freed memory in case of errors after memory allocation. backtrace: [<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline] [<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline] [<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460 [<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728 |
| CVE-2021-47170 | In the Linux kernel, the following vulnerability has been resolved: USB: usbfs: Don't WARN about excessively large memory allocations Syzbot found that the kernel generates a WARNing if the user tries to submit a bulk transfer through usbfs with a buffer that is way too large. This isn't a bug in the kernel; it's merely an invalid request from the user and the usbfs code does handle it correctly. In theory the same thing can happen with async transfers, or with the packet descriptor table for isochronous transfers. To prevent the MM subsystem from complaining about these bad allocation requests, add the __GFP_NOWARN flag to the kmalloc calls for these buffers. |
| CVE-2021-47169 | In the Linux kernel, the following vulnerability has been resolved: serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait' In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls 'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the firmware don't exists, function just return without initializing ports of 'rp2_card'. But now the interrupt handler function has been registered, and when an interrupt comes, 'rp2_uart_interrupt' may access those ports then causing NULL pointer dereference or other bugs. Because the driver does some initialization work in 'rp2_fw_cb', in order to make the driver ready to handle interrupts, 'request_firmware' should be used instead of asynchronous 'request_firmware_nowait'. This report reveals it: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xec/0x156 lib/dump_stack.c:118 assign_lock_key kernel/locking/lockdep.c:727 [inline] register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753 __lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303 lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline] rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493 rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline] handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61 Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200 RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840 R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002 R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline] default_idle+0x6f/0x360 arch/x86/kernel/process.c:557 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline] RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline] RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c: 493 Co ---truncated--- |
| CVE-2021-47168 | In the Linux kernel, the following vulnerability has been resolved: NFS: fix an incorrect limit in filelayout_decode_layout() The "sizeof(struct nfs_fh)" is two bytes too large and could lead to memory corruption. It should be NFS_MAXFHSIZE because that's the size of the ->data[] buffer. I reversed the size of the arguments to put the variable on the left. |
| CVE-2021-47167 | In the Linux kernel, the following vulnerability has been resolved: NFS: Fix an Oopsable condition in __nfs_pageio_add_request() Ensure that nfs_pageio_error_cleanup() resets the mirror array contents, so that the structure reflects the fact that it is now empty. Also change the test in nfs_pageio_do_add_request() to be more robust by checking whether or not the list is empty rather than relying on the value of pg_count. |
| CVE-2021-47166 | In the Linux kernel, the following vulnerability has been resolved: NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce() The value of mirror->pg_bytes_written should only be updated after a successful attempt to flush out the requests on the list. |
| CVE-2021-47165 | In the Linux kernel, the following vulnerability has been resolved: drm/meson: fix shutdown crash when component not probed When main component is not probed, by example when the dw-hdmi module is not loaded yet or in probe defer, the following crash appears on shutdown: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 ... pc : meson_drv_shutdown+0x24/0x50 lr : platform_drv_shutdown+0x20/0x30 ... Call trace: meson_drv_shutdown+0x24/0x50 platform_drv_shutdown+0x20/0x30 device_shutdown+0x158/0x360 kernel_restart_prepare+0x38/0x48 kernel_restart+0x18/0x68 __do_sys_reboot+0x224/0x250 __arm64_sys_reboot+0x24/0x30 ... Simply check if the priv struct has been allocated before using it. |
| CVE-2021-47164 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix null deref accessing lag dev It could be the lag dev is null so stop processing the event. In bond_enslave() the active/backup slave being set before setting the upper dev so first event is without an upper dev. After setting the upper dev with bond_master_upper_dev_link() there is a second event and in that event we have an upper dev. |
| CVE-2021-47163 | In the Linux kernel, the following vulnerability has been resolved: tipc: wait and exit until all work queues are done On some host, a crash could be triggered simply by repeating these commands several times: # modprobe tipc # tipc bearer enable media udp name UDP1 localip 127.0.0.1 # rmmod tipc [] BUG: unable to handle kernel paging request at ffffffffc096bb00 [] Workqueue: events 0xffffffffc096bb00 [] Call Trace: [] ? process_one_work+0x1a7/0x360 [] ? worker_thread+0x30/0x390 [] ? create_worker+0x1a0/0x1a0 [] ? kthread+0x116/0x130 [] ? kthread_flush_work_fn+0x10/0x10 [] ? ret_from_fork+0x35/0x40 When removing the TIPC module, the UDP tunnel sock will be delayed to release in a work queue as sock_release() can't be done in rtnl_lock(). If the work queue is schedule to run after the TIPC module is removed, kernel will crash as the work queue function cleanup_beareri() code no longer exists when trying to invoke it. To fix it, this patch introduce a member wq_count in tipc_net to track the numbers of work queues in schedule, and wait and exit until all work queues are done in tipc_exit_net(). |
| CVE-2021-47162 | In the Linux kernel, the following vulnerability has been resolved: tipc: skb_linearize the head skb when reassembling msgs It's not a good idea to append the frag skb to a skb's frag_list if the frag_list already has skbs from elsewhere, such as this skb was created by pskb_copy() where the frag_list was cloned (all the skbs in it were skb_get'ed) and shared by multiple skbs. However, the new appended frag skb should have been only seen by the current skb. Otherwise, it will cause use after free crashes as this appended frag skb are seen by multiple skbs but it only got skb_get called once. The same thing happens with a skb updated by pskb_may_pull() with a skb_cloned skb. Li Shuang has reported quite a few crashes caused by this when doing testing over macvlan devices: [] kernel BUG at net/core/skbuff.c:1970! [] Call Trace: [] skb_clone+0x4d/0xb0 [] macvlan_broadcast+0xd8/0x160 [macvlan] [] macvlan_process_broadcast+0x148/0x150 [macvlan] [] process_one_work+0x1a7/0x360 [] worker_thread+0x30/0x390 [] kernel BUG at mm/usercopy.c:102! [] Call Trace: [] __check_heap_object+0xd3/0x100 [] __check_object_size+0xff/0x16b [] simple_copy_to_iter+0x1c/0x30 [] __skb_datagram_iter+0x7d/0x310 [] __skb_datagram_iter+0x2a5/0x310 [] skb_copy_datagram_iter+0x3b/0x90 [] tipc_recvmsg+0x14a/0x3a0 [tipc] [] ____sys_recvmsg+0x91/0x150 [] ___sys_recvmsg+0x7b/0xc0 [] kernel BUG at mm/slub.c:305! [] Call Trace: [] <IRQ> [] kmem_cache_free+0x3ff/0x400 [] __netif_receive_skb_core+0x12c/0xc40 [] ? kmem_cache_alloc+0x12e/0x270 [] netif_receive_skb_internal+0x3d/0xb0 [] ? get_rx_page_info+0x8e/0xa0 [be2net] [] be_poll+0x6ef/0xd00 [be2net] [] ? irq_exit+0x4f/0x100 [] net_rx_action+0x149/0x3b0 ... This patch is to fix it by linearizing the head skb if it has frag_list set in tipc_buf_append(). Note that we choose to do this before calling skb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we can not just drop the frag_list either as the early time. |
| CVE-2021-47161 | In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-dspi: Fix a resource leak in an error handling path 'dspi_request_dma()' should be undone by a 'dspi_release_dma()' call in the error handling path of the probe function, as already done in the remove function |
| CVE-2021-47160 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: mt7530: fix VLAN traffic leaks PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but was not reset when it is disabled, which may cause traffic leaks: ip link add br0 type bridge vlan_filtering 1 ip link add br1 type bridge vlan_filtering 1 ip link set swp0 master br0 ip link set swp1 master br1 ip link set br0 type bridge vlan_filtering 0 ip link set br1 type bridge vlan_filtering 0 # traffic in br0 and br1 will start leaking to each other As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the PCR_MATRIX write from mt7530_port_set_vlan_aware. |
| CVE-2021-47159 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix a crash if ->get_sset_count() fails If ds->ops->get_sset_count() fails then it "count" is a negative error code such as -EOPNOTSUPP. Because "i" is an unsigned int, the negative error code is type promoted to a very high value and the loop will corrupt memory until the system crashes. Fix this by checking for error codes and changing the type of "i" to just int. |
| CVE-2021-47158 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: add error handling in sja1105_setup() If any of sja1105_static_config_load(), sja1105_clocking_setup() or sja1105_devlink_setup() fails, we can't just return in the middle of sja1105_setup() or memory will leak. Add a cleanup path. |
| CVE-2021-47153 | In the Linux kernel, the following vulnerability has been resolved: i2c: i801: Don't generate an interrupt on bus reset Now that the i2c-i801 driver supports interrupts, setting the KILL bit in a attempt to recover from a timed out transaction triggers an interrupt. Unfortunately, the interrupt handler (i801_isr) is not prepared for this situation and will try to process the interrupt as if it was signaling the end of a successful transaction. In the case of a block transaction, this can result in an out-of-range memory access. This condition was reproduced several times by syzbot: https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79 So disable interrupts while trying to reset the bus. Interrupts will be enabled again for the following transaction. |
| CVE-2021-47152 | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix data stream corruption Maxim reported several issues when forcing a TCP transparent proxy to use the MPTCP protocol for the inbound connections. He also provided a clean reproducer. The problem boils down to 'mptcp_frag_can_collapse_to()' assuming that only MPTCP will use the given page_frag. If others - e.g. the plain TCP protocol - allocate page fragments, we can end-up re-using already allocated memory for mptcp_data_frag. Fix the issue ensuring that the to-be-expanded data fragment is located at the current page frag end. v1 -> v2: - added missing fixes tag (Mat) |
| CVE-2021-47151 | In the Linux kernel, the following vulnerability has been resolved: interconnect: qcom: bcm-voter: add a missing of_node_put() Add a missing of_node_put() in of_bcm_voter_get() to avoid the reference leak. |
| CVE-2021-47150 | In the Linux kernel, the following vulnerability has been resolved: net: fec: fix the potential memory leak in fec_enet_init() If the memory allocated for cbd_base is failed, it should free the memory allocated for the queues, otherwise it causes memory leak. And if the memory allocated for the queues is failed, it can return error directly. |
| CVE-2021-47149 | In the Linux kernel, the following vulnerability has been resolved: net: fujitsu: fix potential null-ptr-deref In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer deref. To fix this, check the return value of ioremap and return -1 to the caller in case of failure. |
| CVE-2021-47148 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix a buffer overflow in otx2_set_rxfh_context() This function is called from ethtool_set_rxfh() and "*rss_context" comes from the user. Add some bounds checking to prevent memory corruption. |
| CVE-2021-47147 | In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix a resource leak in an error handling path If an error occurs after a successful 'pci_ioremap_bar()' call, it must be undone by a corresponding 'pci_iounmap()' call, as already done in the remove function. |
| CVE-2021-47146 | In the Linux kernel, the following vulnerability has been resolved: mld: fix panic in mld_newpack() mld_newpack() doesn't allow to allocate high order page, only order-0 allocation is allowed. If headroom size is too large, a kernel panic could occur in skb_put(). Test commands: ip netns del A ip netns del B ip netns add A ip netns add B ip link add veth0 type veth peer name veth1 ip link set veth0 netns A ip link set veth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set veth0 up ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set lo up ip netns exec B ip link set veth1 up ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1 for i in {1..99} do let A=$i-1 ip netns exec A ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100 ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i ip netns exec A ip link set ip6gre$i up ip netns exec B ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100 ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i ip netns exec B ip link set ip6gre$i up done Splat looks like: kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x15d/0x15f Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83 41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20 RSP: 0018:ffff88810091f820 EFLAGS: 00010282 RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000 RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031 R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028 R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0 FS: 0000000000000000(0000) GS:ffff888117c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 skb_put.cold.104+0x22/0x22 ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? rcu_read_lock_sched_held+0x91/0xc0 mld_newpack+0x398/0x8f0 ? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600 ? lock_contended+0xc40/0xc40 add_grhead.isra.33+0x280/0x380 add_grec+0x5ca/0xff0 ? mld_sendpack+0xf40/0xf40 ? lock_downgrade+0x690/0x690 mld_send_initial_cr.part.34+0xb9/0x180 ipv6_mc_dad_complete+0x15d/0x1b0 addrconf_dad_completed+0x8d2/0xbb0 ? lock_downgrade+0x690/0x690 ? addrconf_rs_timer+0x660/0x660 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 Allowing high order page allocation could fix this problem. |
| CVE-2021-47145 | In the Linux kernel, the following vulnerability has been resolved: btrfs: do not BUG_ON in link_to_fixup_dir While doing error injection testing I got the following panic kernel BUG at fs/btrfs/tree-log.c:1862! invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 PID: 7836 Comm: mount Not tainted 5.13.0-rc1+ #305 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:link_to_fixup_dir+0xd5/0xe0 RSP: 0018:ffffb5800180fa30 EFLAGS: 00010216 RAX: fffffffffffffffb RBX: 00000000fffffffb RCX: ffff8f595287faf0 RDX: ffffb5800180fa37 RSI: ffff8f5954978800 RDI: 0000000000000000 RBP: ffff8f5953af9450 R08: 0000000000000019 R09: 0000000000000001 R10: 000151f408682970 R11: 0000000120021001 R12: ffff8f5954978800 R13: ffff8f595287faf0 R14: ffff8f5953c77dd0 R15: 0000000000000065 FS: 00007fc5284c8c40(0000) GS:ffff8f59bbd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc5287f47c0 CR3: 000000011275e002 CR4: 0000000000370ee0 Call Trace: replay_one_buffer+0x409/0x470 ? btree_read_extent_buffer_pages+0xd0/0x110 walk_up_log_tree+0x157/0x1e0 walk_log_tree+0xa6/0x1d0 btrfs_recover_log_trees+0x1da/0x360 ? replay_one_extent+0x7b0/0x7b0 open_ctree+0x1486/0x1720 btrfs_mount_root.cold+0x12/0xea ? __kmalloc_track_caller+0x12f/0x240 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 ? vfs_parse_fs_string+0x4d/0x90 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 path_mount+0x433/0xa10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae We can get -EIO or any number of legitimate errors from btrfs_search_slot(), panicing here is not the appropriate response. The error path for this code handles errors properly, simply return the error. |
| CVE-2021-47144 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: fix refcount leak [Why] the gem object rfb->base.obj[0] is get according to num_planes in amdgpufb_create, but is not put according to num_planes [How] put rfb->base.obj[0] in amdgpu_fbdev_destroy according to num_planes |
| CVE-2021-47143 | In the Linux kernel, the following vulnerability has been resolved: net/smc: remove device from smcd_dev_list after failed device_add() If the device_add() for a smcd_dev fails, there's no cleanup step that rolls back the earlier list_add(). The device subsequently gets freed, and we end up with a corrupted list. Add some error handling that removes the device from the list. |
| CVE-2021-47142 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix a use-after-free looks like we forget to set ttm->sg to NULL. Hit panic below [ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 1235.989074] Call Trace: [ 1235.991751] sg_free_table+0x17/0x20 [ 1235.995667] amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu] [ 1236.002288] amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu] [ 1236.008464] ttm_tt_destroy+0x1e/0x30 [ttm] [ 1236.013066] ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm] [ 1236.018783] ttm_bo_release+0x262/0xa50 [ttm] [ 1236.023547] ttm_bo_put+0x82/0xd0 [ttm] [ 1236.027766] amdgpu_bo_unref+0x26/0x50 [amdgpu] [ 1236.032809] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x7aa/0xd90 [amdgpu] [ 1236.040400] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] [ 1236.046912] kfd_ioctl+0x463/0x690 [amdgpu] |
| CVE-2021-47141 | In the Linux kernel, the following vulnerability has been resolved: gve: Add NULL pointer checks when freeing irqs. When freeing notification blocks, we index priv->msix_vectors. If we failed to allocate priv->msix_vectors (see abort_with_msix_vectors) this could lead to a NULL pointer dereference if the driver is unloaded. |
| CVE-2021-47140 | In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Clear DMA ops when switching domain Since commit 08a27c1c3ecf ("iommu: Add support to change default domain of an iommu group") a user can switch a device between IOMMU and direct DMA through sysfs. This doesn't work for AMD IOMMU at the moment because dev->dma_ops is not cleared when switching from a DMA to an identity IOMMU domain. The DMA layer thus attempts to use the dma-iommu ops on an identity domain, causing an oops: # echo 0000:00:05.0 > /sys/sys/bus/pci/drivers/e1000e/unbind # echo identity > /sys/bus/pci/devices/0000:00:05.0/iommu_group/type # echo 0000:00:05.0 > /sys/sys/bus/pci/drivers/e1000e/bind ... BUG: kernel NULL pointer dereference, address: 0000000000000028 ... Call Trace: iommu_dma_alloc e1000e_setup_tx_resources e1000e_open Since iommu_change_dev_def_domain() calls probe_finalize() again, clear the dma_ops there like Vt-d does. |
| CVE-2021-47139 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: put off calling register_netdev() until client initialize complete Currently, the netdevice is registered before client initializing complete. So there is a timewindow between netdevice available and usable. In this case, if user try to change the channel number or ring param, it may cause the hns3_set_rx_cpu_rmap() being called twice, and report bug. [47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0 [47199.430340] hns3 0000:35:00.0 eth1: already uninitialized [47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1 [47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1 [47200.163524] ------------[ cut here ]------------ [47200.171674] kernel BUG at lib/cpu_rmap.c:142! [47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge] [47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G O 5.11.0-rc3+ #1 [47200.215601] Hardware name: , xxxxxx 02/04/2021 [47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [47200.230188] pc : cpu_rmap_add+0x38/0x40 [47200.237472] lr : irq_cpu_rmap_add+0x84/0x140 [47200.243291] sp : ffff800010e93a30 [47200.247295] x29: ffff800010e93a30 x28: ffff082100584880 [47200.254155] x27: 0000000000000000 x26: 0000000000000000 [47200.260712] x25: 0000000000000000 x24: 0000000000000004 [47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0 [47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680 [47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0 [47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0 [47200.293456] x15: fffffc2082990600 x14: dead000000000122 [47200.300059] x13: ffffffffffffffff x12: 000000000000003e [47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000 [47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700 [47200.319682] x7 : 0000000000000000 x6 : 000000000000003f [47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20 [47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80 [47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004 [47200.346058] Call trace: [47200.349324] cpu_rmap_add+0x38/0x40 [47200.354300] hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3] [47200.362294] hns3_reset_notify_init_enet+0x1cc/0x340 [hns3] [47200.370049] hns3_change_channels+0x40/0xb0 [hns3] [47200.376770] hns3_set_channels+0x12c/0x2a0 [hns3] [47200.383353] ethtool_set_channels+0x140/0x250 [47200.389772] dev_ethtool+0x714/0x23d0 [47200.394440] dev_ioctl+0x4cc/0x640 [47200.399277] sock_do_ioctl+0x100/0x2a0 [47200.404574] sock_ioctl+0x28c/0x470 [47200.409079] __arm64_sys_ioctl+0xb4/0x100 [47200.415217] el0_svc_common.constprop.0+0x84/0x210 [47200.422088] do_el0_svc+0x28/0x34 [47200.426387] el0_svc+0x28/0x70 [47200.431308] el0_sync_handler+0x1a4/0x1b0 [47200.436477] el0_sync+0x174/0x180 [47200.441562] Code: 11000405 79000c45 f8247861 d65f03c0 (d4210000) [47200.448869] ---[ end trace a01efe4ce42e5f34 ]--- The process is like below: excuting hns3_client_init | register_netdev() | hns3_set_channels() | | hns3_set_rx_cpu_rmap() hns3_reset_notify_uninit_enet() | | | quit without calling function | hns3_free_rx_cpu_rmap for flag | HNS3_NIC_STATE_INITED is unset. | | | hns3_reset_notify_init_enet() | | set HNS3_NIC_STATE_INITED call hns3_set_rx_cpu_rmap()-- crash Fix it by calling register_netdev() at the end of function hns3_client_init(). |
| CVE-2021-47138 | In the Linux kernel, the following vulnerability has been resolved: cxgb4: avoid accessing registers when clearing filters Hardware register having the server TID base can contain invalid values when adapter is in bad state (for example, due to AER fatal error). Reading these invalid values in the register can lead to out-of-bound memory access. So, fix by using the saved server TID base when clearing filters. |
| CVE-2021-47137 | In the Linux kernel, the following vulnerability has been resolved: net: lantiq: fix memory corruption in RX ring In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter. |
| CVE-2021-47136 | In the Linux kernel, the following vulnerability has been resolved: net: zero-initialize tc skb extension on allocation Function skb_ext_add() doesn't initialize created skb extension with any value and leaves it up to the user. However, since extension of type TC_SKB_EXT originally contained only single value tc_skb_ext->chain its users used to just assign the chain value without setting whole extension memory to zero first. This assumption changed when TC_SKB_EXT extension was extended with additional fields but not all users were updated to initialize the new fields which leads to use of uninitialized memory afterwards. UBSAN log: [ 778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28 [ 778.301495] load of value 107 is not a valid value for type '_Bool' [ 778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2 [ 778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 778.307901] Call Trace: [ 778.308680] <IRQ> [ 778.309358] dump_stack+0xbb/0x107 [ 778.310307] ubsan_epilogue+0x5/0x40 [ 778.311167] __ubsan_handle_load_invalid_value.cold+0x43/0x48 [ 778.312454] ? memset+0x20/0x40 [ 778.313230] ovs_flow_key_extract.cold+0xf/0x14 [openvswitch] [ 778.314532] ovs_vport_receive+0x19e/0x2e0 [openvswitch] [ 778.315749] ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch] [ 778.317188] ? create_prof_cpu_mask+0x20/0x20 [ 778.318220] ? arch_stack_walk+0x82/0xf0 [ 778.319153] ? secondary_startup_64_no_verify+0xb0/0xbb [ 778.320399] ? stack_trace_save+0x91/0xc0 [ 778.321362] ? stack_trace_consume_entry+0x160/0x160 [ 778.322517] ? lock_release+0x52e/0x760 [ 778.323444] netdev_frame_hook+0x323/0x610 [openvswitch] [ 778.324668] ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch] [ 778.325950] __netif_receive_skb_core+0x771/0x2db0 [ 778.327067] ? lock_downgrade+0x6e0/0x6f0 [ 778.328021] ? lock_acquire+0x565/0x720 [ 778.328940] ? generic_xdp_tx+0x4f0/0x4f0 [ 778.329902] ? inet_gro_receive+0x2a7/0x10a0 [ 778.330914] ? lock_downgrade+0x6f0/0x6f0 [ 778.331867] ? udp4_gro_receive+0x4c4/0x13e0 [ 778.332876] ? lock_release+0x52e/0x760 [ 778.333808] ? dev_gro_receive+0xcc8/0x2380 [ 778.334810] ? lock_downgrade+0x6f0/0x6f0 [ 778.335769] __netif_receive_skb_list_core+0x295/0x820 [ 778.336955] ? process_backlog+0x780/0x780 [ 778.337941] ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core] [ 778.339613] ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0 [ 778.341033] ? kvm_clock_get_cycles+0x14/0x20 [ 778.342072] netif_receive_skb_list_internal+0x5f5/0xcb0 [ 778.343288] ? __kasan_kmalloc+0x7a/0x90 [ 778.344234] ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core] [ 778.345676] ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core] [ 778.347140] ? __netif_receive_skb_list_core+0x820/0x820 [ 778.348351] ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core] [ 778.349688] ? napi_gro_flush+0x26c/0x3c0 [ 778.350641] napi_complete_done+0x188/0x6b0 [ 778.351627] mlx5e_napi_poll+0x373/0x1b80 [mlx5_core] [ 778.352853] __napi_poll+0x9f/0x510 [ 778.353704] ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core] [ 778.355158] net_rx_action+0x34c/0xa40 [ 778.356060] ? napi_threaded_poll+0x3d0/0x3d0 [ 778.357083] ? sched_clock_cpu+0x18/0x190 [ 778.358041] ? __common_interrupt+0x8e/0x1a0 [ 778.359045] __do_softirq+0x1ce/0x984 [ 778.359938] __irq_exit_rcu+0x137/0x1d0 [ 778.360865] irq_exit_rcu+0xa/0x20 [ 778.361708] common_interrupt+0x80/0xa0 [ 778.362640] </IRQ> [ 778.363212] asm_common_interrupt+0x1e/0x40 [ 778.364204] RIP: 0010:native_safe_halt+0xe/0x10 [ 778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00 [ 778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246 [ 778.370570] RAX ---truncated--- |
| CVE-2021-47135 | In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix possible AOOB issue in mt7921_mcu_tx_rate_report Fix possible array out of bound access in mt7921_mcu_tx_rate_report. Remove unnecessary varibable in mt7921_mcu_tx_rate_report |
| CVE-2021-47134 | In the Linux kernel, the following vulnerability has been resolved: efi/fdt: fix panic when no valid fdt found setup_arch() would invoke efi_init()->efi_get_fdt_params(). If no valid fdt found then initial_boot_params will be null. So we should stop further fdt processing here. I encountered this issue on risc-v. |
| CVE-2021-47133 | In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix memory leak in amd_sfh_work Kmemleak tool detected a memory leak in the amd_sfh driver. ==================== unreferenced object 0xffff88810228ada0 (size 32): comm "insmod", pid 3968, jiffies 4295056001 (age 775.792s) hex dump (first 32 bytes): 00 20 73 1f 81 88 ff ff 00 01 00 00 00 00 ad de . s............. 22 01 00 00 00 00 ad de 01 00 02 00 00 00 00 00 "............... backtrace: [<000000007b4c8799>] kmem_cache_alloc_trace+0x163/0x4f0 [<0000000005326893>] amd_sfh_get_report+0xa4/0x1d0 [amd_sfh] [<000000002a9e5ec4>] amdtp_hid_request+0x62/0x80 [amd_sfh] [<00000000b8a95807>] sensor_hub_get_feature+0x145/0x270 [hid_sensor_hub] [<00000000fda054ee>] hid_sensor_parse_common_attributes+0x215/0x460 [hid_sensor_iio_common] [<0000000021279ecf>] hid_accel_3d_probe+0xff/0x4a0 [hid_sensor_accel_3d] [<00000000915760ce>] platform_probe+0x6a/0xd0 [<0000000060258a1f>] really_probe+0x192/0x620 [<00000000fa812f2d>] driver_probe_device+0x14a/0x1d0 [<000000005e79f7fd>] __device_attach_driver+0xbd/0x110 [<0000000070d15018>] bus_for_each_drv+0xfd/0x160 [<0000000013a3c312>] __device_attach+0x18b/0x220 [<000000008c7b4afc>] device_initial_probe+0x13/0x20 [<00000000e6e99665>] bus_probe_device+0xfe/0x120 [<00000000833fa90b>] device_add+0x6a6/0xe00 [<00000000fa901078>] platform_device_add+0x180/0x380 ==================== The fix is to freeing request_list entry once the processed entry is removed from the request_list. |
| CVE-2021-47132 | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix sk_forward_memory corruption on retransmission MPTCP sk_forward_memory handling is a bit special, as such field is protected by the msk socket spin_lock, instead of the plain socket lock. Currently we have a code path updating such field without handling the relevant lock: __mptcp_retrans() -> __mptcp_clean_una_wakeup() Several helpers in __mptcp_clean_una_wakeup() will update sk_forward_alloc, possibly causing such field corruption, as reported by Matthieu. Address the issue providing and using a new variant of blamed function which explicitly acquires the msk spin lock. |
| CVE-2021-47131 | In the Linux kernel, the following vulnerability has been resolved: net/tls: Fix use-after-free after the TLS device goes down and up When a netdev with active TLS offload goes down, tls_device_down is called to stop the offload and tear down the TLS context. However, the socket stays alive, and it still points to the TLS context, which is now deallocated. If a netdev goes up, while the connection is still active, and the data flow resumes after a number of TCP retransmissions, it will lead to a use-after-free of the TLS context. This commit addresses this bug by keeping the context alive until its normal destruction, and implements the necessary fallbacks, so that the connection can resume in software (non-offloaded) kTLS mode. On the TX side tls_sw_fallback is used to encrypt all packets. The RX side already has all the necessary fallbacks, because receiving non-decrypted packets is supported. The thing needed on the RX side is to block resync requests, which are normally produced after receiving non-decrypted packets. The necessary synchronization is implemented for a graceful teardown: first the fallbacks are deployed, then the driver resources are released (it used to be possible to have a tls_dev_resync after tls_dev_del). A new flag called TLS_RX_DEV_DEGRADED is added to indicate the fallback mode. It's used to skip the RX resync logic completely, as it becomes useless, and some objects may be released (for example, resync_async, which is allocated and freed by the driver). |
| CVE-2021-47130 | In the Linux kernel, the following vulnerability has been resolved: nvmet: fix freeing unallocated p2pmem In case p2p device was found but the p2p pool is empty, the nvme target is still trying to free the sgl from the p2p pool instead of the regular sgl pool and causing a crash (BUG() is called). Instead, assign the p2p_dev for the request only if it was allocated from p2p pool. This is the crash that was caused: [Sun May 30 19:13:53 2021] ------------[ cut here ]------------ [Sun May 30 19:13:53 2021] kernel BUG at lib/genalloc.c:518! [Sun May 30 19:13:53 2021] invalid opcode: 0000 [#1] SMP PTI ... [Sun May 30 19:13:53 2021] kernel BUG at lib/genalloc.c:518! ... [Sun May 30 19:13:53 2021] RIP: 0010:gen_pool_free_owner+0xa8/0xb0 ... [Sun May 30 19:13:53 2021] Call Trace: [Sun May 30 19:13:53 2021] ------------[ cut here ]------------ [Sun May 30 19:13:53 2021] pci_free_p2pmem+0x2b/0x70 [Sun May 30 19:13:53 2021] pci_p2pmem_free_sgl+0x4f/0x80 [Sun May 30 19:13:53 2021] nvmet_req_free_sgls+0x1e/0x80 [nvmet] [Sun May 30 19:13:53 2021] kernel BUG at lib/genalloc.c:518! [Sun May 30 19:13:53 2021] nvmet_rdma_release_rsp+0x4e/0x1f0 [nvmet_rdma] [Sun May 30 19:13:53 2021] nvmet_rdma_send_done+0x1c/0x60 [nvmet_rdma] |
| CVE-2021-47129 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: skip expectations for confirmed conntrack nft_ct_expect_obj_eval() calls nf_ct_ext_add() for a confirmed conntrack entry. However, nf_ct_ext_add() can only be called for !nf_ct_is_confirmed(). [ 1825.349056] WARNING: CPU: 0 PID: 1279 at net/netfilter/nf_conntrack_extend.c:48 nf_ct_xt_add+0x18e/0x1a0 [nf_conntrack] [ 1825.351391] RIP: 0010:nf_ct_ext_add+0x18e/0x1a0 [nf_conntrack] [ 1825.351493] Code: 41 5c 41 5d 41 5e 41 5f c3 41 bc 0a 00 00 00 e9 15 ff ff ff ba 09 00 00 00 31 f6 4c 89 ff e8 69 6c 3d e9 eb 96 45 31 ed eb cd <0f> 0b e9 b1 fe ff ff e8 86 79 14 e9 eb bf 0f 1f 40 00 0f 1f 44 00 [ 1825.351721] RSP: 0018:ffffc90002e1f1e8 EFLAGS: 00010202 [ 1825.351790] RAX: 000000000000000e RBX: ffff88814f5783c0 RCX: ffffffffc0e4f887 [ 1825.351881] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88814f578440 [ 1825.351971] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff88814f578447 [ 1825.352060] R10: ffffed1029eaf088 R11: 0000000000000001 R12: ffff88814f578440 [ 1825.352150] R13: ffff8882053f3a00 R14: 0000000000000000 R15: 0000000000000a20 [ 1825.352240] FS: 00007f992261c900(0000) GS:ffff889faec00000(0000) knlGS:0000000000000000 [ 1825.352343] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1825.352417] CR2: 000056070a4d1158 CR3: 000000015efe0000 CR4: 0000000000350ee0 [ 1825.352508] Call Trace: [ 1825.352544] nf_ct_helper_ext_add+0x10/0x60 [nf_conntrack] [ 1825.352641] nft_ct_expect_obj_eval+0x1b8/0x1e0 [nft_ct] [ 1825.352716] nft_do_chain+0x232/0x850 [nf_tables] Add the ct helper extension only for unconfirmed conntrack. Skip rule evaluation if the ct helper extension does not exist. Thus, you can only create expectations from the first packet. It should be possible to remove this limitation by adding a new action to attach a generic ct helper to the first packet. Then, use this ct helper extension from follow up packets to create the ct expectation. While at it, add a missing check to skip the template conntrack too and remove check for IPCT_UNTRACK which is implicit to !ct. |
| CVE-2021-47128 | In the Linux kernel, the following vulnerability has been resolved: bpf, lockdown, audit: Fix buggy SELinux lockdown permission checks Commit 59438b46471a ("security,lockdown,selinux: implement SELinux lockdown") added an implementation of the locked_down LSM hook to SELinux, with the aim to restrict which domains are allowed to perform operations that would breach lockdown. This is indirectly also getting audit subsystem involved to report events. The latter is problematic, as reported by Ondrej and Serhei, since it can bring down the whole system via audit: 1) The audit events that are triggered due to calls to security_locked_down() can OOM kill a machine, see below details [0]. 2) It also seems to be causing a deadlock via avc_has_perm()/slow_avc_audit() when trying to wake up kauditd, for example, when using trace_sched_switch() tracepoint, see details in [1]. Triggering this was not via some hypothetical corner case, but with existing tools like runqlat & runqslower from bcc, for example, which make use of this tracepoint. Rough call sequence goes like: rq_lock(rq) -> -------------------------+ trace_sched_switch() -> | bpf_prog_xyz() -> +-> deadlock selinux_lockdown() -> | audit_log_end() -> | wake_up_interruptible() -> | try_to_wake_up() -> | rq_lock(rq) --------------+ What's worse is that the intention of 59438b46471a to further restrict lockdown settings for specific applications in respect to the global lockdown policy is completely broken for BPF. The SELinux policy rule for the current lockdown check looks something like this: allow <who> <who> : lockdown { <reason> }; However, this doesn't match with the 'current' task where the security_locked_down() is executed, example: httpd does a syscall. There is a tracing program attached to the syscall which triggers a BPF program to run, which ends up doing a bpf_probe_read_kernel{,_str}() helper call. The selinux_lockdown() hook does the permission check against 'current', that is, httpd in this example. httpd has literally zero relation to this tracing program, and it would be nonsensical having to write an SELinux policy rule against httpd to let the tracing helper pass. The policy in this case needs to be against the entity that is installing the BPF program. For example, if bpftrace would generate a histogram of syscall counts by user space application: bpftrace -e 'tracepoint:raw_syscalls:sys_enter { @[comm] = count(); }' bpftrace would then go and generate a BPF program from this internally. One way of doing it [for the sake of the example] could be to call bpf_get_current_task() helper and then access current->comm via one of bpf_probe_read_kernel{,_str}() helpers. So the program itself has nothing to do with httpd or any other random app doing a syscall here. The BPF program _explicitly initiated_ the lockdown check. The allow/deny policy belongs in the context of bpftrace: meaning, you want to grant bpftrace access to use these helpers, but other tracers on the system like my_random_tracer _not_. Therefore fix all three issues at the same time by taking a completely different approach for the security_locked_down() hook, that is, move the check into the program verification phase where we actually retrieve the BPF func proto. This also reliably gets the task (current) that is trying to install the BPF tracing program, e.g. bpftrace/bcc/perf/systemtap/etc, and it also fixes the OOM since we're moving this out of the BPF helper's fast-path which can be called several millions of times per second. The check is then also in line with other security_locked_down() hooks in the system where the enforcement is performed at open/load time, for example, open_kcore() for /proc/kcore access or module_sig_check() for module signatures just to pick f ---truncated--- |
| CVE-2021-47127 | In the Linux kernel, the following vulnerability has been resolved: ice: track AF_XDP ZC enabled queues in bitmap Commit c7a219048e45 ("ice: Remove xsk_buff_pool from VSI structure") silently introduced a regression and broke the Tx side of AF_XDP in copy mode. xsk_pool on ice_ring is set only based on the existence of the XDP prog on the VSI which in turn picks ice_clean_tx_irq_zc to be executed. That is not something that should happen for copy mode as it should use the regular data path ice_clean_tx_irq. This results in a following splat when xdpsock is run in txonly or l2fwd scenarios in copy mode: <snip> [ 106.050195] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 106.057269] #PF: supervisor read access in kernel mode [ 106.062493] #PF: error_code(0x0000) - not-present page [ 106.067709] PGD 0 P4D 0 [ 106.070293] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 106.074721] CPU: 61 PID: 0 Comm: swapper/61 Not tainted 5.12.0-rc2+ #45 [ 106.081436] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 106.092027] RIP: 0010:xp_raw_get_dma+0x36/0x50 [ 106.096551] Code: 74 14 48 b8 ff ff ff ff ff ff 00 00 48 21 f0 48 c1 ee 30 48 01 c6 48 8b 87 90 00 00 00 48 89 f2 81 e6 ff 0f 00 00 48 c1 ea 0c <48> 8b 04 d0 48 83 e0 fe 48 01 f0 c3 66 66 2e 0f 1f 84 00 00 00 00 [ 106.115588] RSP: 0018:ffffc9000d694e50 EFLAGS: 00010206 [ 106.120893] RAX: 0000000000000000 RBX: ffff88984b8c8a00 RCX: ffff889852581800 [ 106.128137] RDX: 0000000000000006 RSI: 0000000000000000 RDI: ffff88984cd8b800 [ 106.135383] RBP: ffff888123b50001 R08: ffff889896800000 R09: 0000000000000800 [ 106.142628] R10: 0000000000000000 R11: ffffffff826060c0 R12: 00000000000000ff [ 106.149872] R13: 0000000000000000 R14: 0000000000000040 R15: ffff888123b50018 [ 106.157117] FS: 0000000000000000(0000) GS:ffff8897e0f40000(0000) knlGS:0000000000000000 [ 106.165332] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.171163] CR2: 0000000000000030 CR3: 000000000560a004 CR4: 00000000007706e0 [ 106.178408] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 106.185653] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 106.192898] PKRU: 55555554 [ 106.195653] Call Trace: [ 106.198143] <IRQ> [ 106.200196] ice_clean_tx_irq_zc+0x183/0x2a0 [ice] [ 106.205087] ice_napi_poll+0x3e/0x590 [ice] [ 106.209356] __napi_poll+0x2a/0x160 [ 106.212911] net_rx_action+0xd6/0x200 [ 106.216634] __do_softirq+0xbf/0x29b [ 106.220274] irq_exit_rcu+0x88/0xc0 [ 106.223819] common_interrupt+0x7b/0xa0 [ 106.227719] </IRQ> [ 106.229857] asm_common_interrupt+0x1e/0x40 </snip> Fix this by introducing the bitmap of queues that are zero-copy enabled, where each bit, corresponding to a queue id that xsk pool is being configured on, will be set/cleared within ice_xsk_pool_{en,dis}able and checked within ice_xsk_pool(). The latter is a function used for deciding which napi poll routine is executed. Idea is being taken from our other drivers such as i40e and ixgbe. |
| CVE-2021-47126 | In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions Reported by syzbot: HEAD commit: 90c911ad Merge tag 'fixes' of git://git.kernel.org/pub/scm.. git tree: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master dashboard link: https://syzkaller.appspot.com/bug?extid=123aa35098fd3c000eb7 compiler: Debian clang version 11.0.1-2 ================================================================== BUG: KASAN: slab-out-of-bounds in fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] BUG: KASAN: slab-out-of-bounds in fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 Read of size 8 at addr ffff8880145c78f8 by task syz-executor.4/17760 CPU: 0 PID: 17760 Comm: syz-executor.4 Not tainted 5.12.0-rc8-syzkaller #0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x202/0x31e lib/dump_stack.c:120 print_address_description+0x5f/0x3b0 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report+0x15c/0x200 mm/kasan/report.c:416 fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 fib6_nh_release+0x9a/0x430 net/ipv6/route.c:3536 fib6_info_destroy_rcu+0xcb/0x1c0 net/ipv6/ip6_fib.c:174 rcu_do_batch kernel/rcu/tree.c:2559 [inline] rcu_core+0x8f6/0x1450 kernel/rcu/tree.c:2794 __do_softirq+0x372/0x7a6 kernel/softirq.c:345 invoke_softirq kernel/softirq.c:221 [inline] __irq_exit_rcu+0x22c/0x260 kernel/softirq.c:422 irq_exit_rcu+0x5/0x20 kernel/softirq.c:434 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1100 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:632 RIP: 0010:lock_acquire+0x1f6/0x720 kernel/locking/lockdep.c:5515 Code: f6 84 24 a1 00 00 00 02 0f 85 8d 02 00 00 f7 c3 00 02 00 00 49 bd 00 00 00 00 00 fc ff df 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 3d 00 00 00 00 00 4b c7 44 3d 09 00 00 00 00 43 c7 44 3d RSP: 0018:ffffc90009e06560 EFLAGS: 00000206 RAX: 1ffff920013c0cc0 RBX: 0000000000000246 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90009e066e0 R08: dffffc0000000000 R09: fffffbfff1f992b1 R10: fffffbfff1f992b1 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000000 R15: 1ffff920013c0cb4 rcu_lock_acquire+0x2a/0x30 include/linux/rcupdate.h:267 rcu_read_lock include/linux/rcupdate.h:656 [inline] ext4_get_group_info+0xea/0x340 fs/ext4/ext4.h:3231 ext4_mb_prefetch+0x123/0x5d0 fs/ext4/mballoc.c:2212 ext4_mb_regular_allocator+0x8a5/0x28f0 fs/ext4/mballoc.c:2379 ext4_mb_new_blocks+0xc6e/0x24f0 fs/ext4/mballoc.c:4982 ext4_ext_map_blocks+0x2be3/0x7210 fs/ext4/extents.c:4238 ext4_map_blocks+0xab3/0x1cb0 fs/ext4/inode.c:638 ext4_getblk+0x187/0x6c0 fs/ext4/inode.c:848 ext4_bread+0x2a/0x1c0 fs/ext4/inode.c:900 ext4_append+0x1a4/0x360 fs/ext4/namei.c:67 ext4_init_new_dir+0x337/0xa10 fs/ext4/namei.c:2768 ext4_mkdir+0x4b8/0xc00 fs/ext4/namei.c:2814 vfs_mkdir+0x45b/0x640 fs/namei.c:3819 ovl_do_mkdir fs/overlayfs/overlayfs.h:161 [inline] ovl_mkdir_real+0x53/0x1a0 fs/overlayfs/dir.c:146 ovl_create_real+0x280/0x490 fs/overlayfs/dir.c:193 ovl_workdir_create+0x425/0x600 fs/overlayfs/super.c:788 ovl_make_workdir+0xed/0x1140 fs/overlayfs/super.c:1355 ovl_get_workdir fs/overlayfs/super.c:1492 [inline] ovl_fill_super+0x39ee/0x5370 fs/overlayfs/super.c:2035 mount_nodev+0x52/0xe0 fs/super.c:1413 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2903 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3233 do_mount fs/namespace.c:3246 [inline] __do_sys_mount fs/namespace.c:3454 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3431 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 ---truncated--- |
| CVE-2021-47125 | In the Linux kernel, the following vulnerability has been resolved: sch_htb: fix refcount leak in htb_parent_to_leaf_offload The commit ae81feb7338c ("sch_htb: fix null pointer dereference on a null new_q") fixes a NULL pointer dereference bug, but it is not correct. Because htb_graft_helper properly handles the case when new_q is NULL, and after the previous patch by skipping this call which creates an inconsistency : dev_queue->qdisc will still point to the old qdisc, but cl->parent->leaf.q will point to the new one (which will be noop_qdisc, because new_q was NULL). The code is based on an assumption that these two pointers are the same, so it can lead to refcount leaks. The correct fix is to add a NULL pointer check to protect qdisc_refcount_inc inside htb_parent_to_leaf_offload. |
| CVE-2021-47124 | In the Linux kernel, the following vulnerability has been resolved: io_uring: fix link timeout refs WARNING: CPU: 0 PID: 10242 at lib/refcount.c:28 refcount_warn_saturate+0x15b/0x1a0 lib/refcount.c:28 RIP: 0010:refcount_warn_saturate+0x15b/0x1a0 lib/refcount.c:28 Call Trace: __refcount_sub_and_test include/linux/refcount.h:283 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] io_put_req fs/io_uring.c:2140 [inline] io_queue_linked_timeout fs/io_uring.c:6300 [inline] __io_queue_sqe+0xbef/0xec0 fs/io_uring.c:6354 io_submit_sqe fs/io_uring.c:6534 [inline] io_submit_sqes+0x2bbd/0x7c50 fs/io_uring.c:6660 __do_sys_io_uring_enter fs/io_uring.c:9240 [inline] __se_sys_io_uring_enter+0x256/0x1d60 fs/io_uring.c:9182 io_link_timeout_fn() should put only one reference of the linked timeout request, however in case of racing with the master request's completion first io_req_complete() puts one and then io_put_req_deferred() is called. |
| CVE-2021-47123 | In the Linux kernel, the following vulnerability has been resolved: io_uring: fix ltout double free on completion race Always remove linked timeout on io_link_timeout_fn() from the master request link list, otherwise we may get use-after-free when first io_link_timeout_fn() puts linked timeout in the fail path, and then will be found and put on master's free. |
| CVE-2021-47122 | In the Linux kernel, the following vulnerability has been resolved: net: caif: fix memory leak in caif_device_notify In case of caif_enroll_dev() fail, allocated link_support won't be assigned to the corresponding structure. So simply free allocated pointer in case of error |
| CVE-2021-47121 | In the Linux kernel, the following vulnerability has been resolved: net: caif: fix memory leak in cfusbl_device_notify In case of caif_enroll_dev() fail, allocated link_support won't be assigned to the corresponding structure. So simply free allocated pointer in case of error. |
| CVE-2021-47120 | In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: fix NULL-deref on disconnect Commit 9d7b18668956 ("HID: magicmouse: add support for Apple Magic Trackpad 2") added a sanity check for an Apple trackpad but returned success instead of -ENODEV when the check failed. This means that the remove callback will dereference the never-initialised driver data pointer when the driver is later unbound (e.g. on USB disconnect). |
| CVE-2021-47119 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leak in ext4_fill_super Buffer head references must be released before calling kill_bdev(); otherwise the buffer head (and its page referenced by b_data) will not be freed by kill_bdev, and subsequently that bh will be leaked. If blocksizes differ, sb_set_blocksize() will kill current buffers and page cache by using kill_bdev(). And then super block will be reread again but using correct blocksize this time. sb_set_blocksize() didn't fully free superblock page and buffer head, and being busy, they were not freed and instead leaked. This can easily be reproduced by calling an infinite loop of: systemctl start <ext4_on_lvm>.mount, and systemctl stop <ext4_on_lvm>.mount ... since systemd creates a cgroup for each slice which it mounts, and the bh leak get amplified by a dying memory cgroup that also never gets freed, and memory consumption is much more easily noticed. |
| CVE-2021-47118 | In the Linux kernel, the following vulnerability has been resolved: pid: take a reference when initializing `cad_pid` During boot, kernel_init_freeable() initializes `cad_pid` to the init task's struct pid. Later on, we may change `cad_pid` via a sysctl, and when this happens proc_do_cad_pid() will increment the refcount on the new pid via get_pid(), and will decrement the refcount on the old pid via put_pid(). As we never called get_pid() when we initialized `cad_pid`, we decrement a reference we never incremented, can therefore free the init task's struct pid early. As there can be dangling references to the struct pid, we can later encounter a use-after-free (e.g. when delivering signals). This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to have been around since the conversion of `cad_pid` to struct pid in commit 9ec52099e4b8 ("[PATCH] replace cad_pid by a struct pid") from the pre-KASAN stone age of v2.6.19. Fix this by getting a reference to the init task's struct pid when we assign it to `cad_pid`. Full KASAN splat below. ================================================================== BUG: KASAN: use-after-free in ns_of_pid include/linux/pid.h:153 [inline] BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273 CPU: 1 PID: 273 Comm: syz-executor.0 Not tainted 5.12.0-00001-g9aef892b2d15 #1 Hardware name: linux,dummy-virt (DT) Call trace: ns_of_pid include/linux/pid.h:153 [inline] task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 do_notify_parent+0x308/0xe60 kernel/signal.c:1950 exit_notify kernel/exit.c:682 [inline] do_exit+0x2334/0x2bd0 kernel/exit.c:845 do_group_exit+0x108/0x2c8 kernel/exit.c:922 get_signal+0x4e4/0x2a88 kernel/signal.c:2781 do_signal arch/arm64/kernel/signal.c:882 [inline] do_notify_resume+0x300/0x970 arch/arm64/kernel/signal.c:936 work_pending+0xc/0x2dc Allocated by task 0: slab_post_alloc_hook+0x50/0x5c0 mm/slab.h:516 slab_alloc_node mm/slub.c:2907 [inline] slab_alloc mm/slub.c:2915 [inline] kmem_cache_alloc+0x1f4/0x4c0 mm/slub.c:2920 alloc_pid+0xdc/0xc00 kernel/pid.c:180 copy_process+0x2794/0x5e18 kernel/fork.c:2129 kernel_clone+0x194/0x13c8 kernel/fork.c:2500 kernel_thread+0xd4/0x110 kernel/fork.c:2552 rest_init+0x44/0x4a0 init/main.c:687 arch_call_rest_init+0x1c/0x28 start_kernel+0x520/0x554 init/main.c:1064 0x0 Freed by task 270: slab_free_hook mm/slub.c:1562 [inline] slab_free_freelist_hook+0x98/0x260 mm/slub.c:1600 slab_free mm/slub.c:3161 [inline] kmem_cache_free+0x224/0x8e0 mm/slub.c:3177 put_pid.part.4+0xe0/0x1a8 kernel/pid.c:114 put_pid+0x30/0x48 kernel/pid.c:109 proc_do_cad_pid+0x190/0x1b0 kernel/sysctl.c:1401 proc_sys_call_handler+0x338/0x4b0 fs/proc/proc_sysctl.c:591 proc_sys_write+0x34/0x48 fs/proc/proc_sysctl.c:617 call_write_iter include/linux/fs.h:1977 [inline] new_sync_write+0x3ac/0x510 fs/read_write.c:518 vfs_write fs/read_write.c:605 [inline] vfs_write+0x9c4/0x1018 fs/read_write.c:585 ksys_write+0x124/0x240 fs/read_write.c:658 __do_sys_write fs/read_write.c:670 [inline] __se_sys_write fs/read_write.c:667 [inline] __arm64_sys_write+0x78/0xb0 fs/read_write.c:667 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall arch/arm64/kernel/syscall.c:49 [inline] el0_svc_common.constprop.1+0x16c/0x388 arch/arm64/kernel/syscall.c:129 do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:168 el0_svc+0x28/0x38 arch/arm64/kernel/entry-common.c:416 el0_sync_handler+0x134/0x180 arch/arm64/kernel/entry-common.c:432 el0_sync+0x154/0x180 arch/arm64/kernel/entry.S:701 The buggy address belongs to the object at ffff23794dda0000 which belongs to the cache pid of size 224 The buggy address is located 4 bytes inside of 224-byte region [ff ---truncated--- |
| CVE-2021-47117 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed We got follow bug_on when run fsstress with injecting IO fault: [130747.323114] kernel BUG at fs/ext4/extents_status.c:762! [130747.323117] Internal error: Oops - BUG: 0 [#1] SMP ...... [130747.334329] Call trace: [130747.334553] ext4_es_cache_extent+0x150/0x168 [ext4] [130747.334975] ext4_cache_extents+0x64/0xe8 [ext4] [130747.335368] ext4_find_extent+0x300/0x330 [ext4] [130747.335759] ext4_ext_map_blocks+0x74/0x1178 [ext4] [130747.336179] ext4_map_blocks+0x2f4/0x5f0 [ext4] [130747.336567] ext4_mpage_readpages+0x4a8/0x7a8 [ext4] [130747.336995] ext4_readpage+0x54/0x100 [ext4] [130747.337359] generic_file_buffered_read+0x410/0xae8 [130747.337767] generic_file_read_iter+0x114/0x190 [130747.338152] ext4_file_read_iter+0x5c/0x140 [ext4] [130747.338556] __vfs_read+0x11c/0x188 [130747.338851] vfs_read+0x94/0x150 [130747.339110] ksys_read+0x74/0xf0 This patch's modification is according to Jan Kara's suggestion in: https://patchwork.ozlabs.org/project/linux-ext4/patch/[email protected]/ "I see. Now I understand your patch. Honestly, seeing how fragile is trying to fix extent tree after split has failed in the middle, I would probably go even further and make sure we fix the tree properly in case of ENOSPC and EDQUOT (those are easily user triggerable). Anything else indicates a HW problem or fs corruption so I'd rather leave the extent tree as is and don't try to fix it (which also means we will not create overlapping extents)." |
| CVE-2021-47116 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leak in ext4_mb_init_backend on error path. Fix a memory leak discovered by syzbot when a file system is corrupted with an illegally large s_log_groups_per_flex. |
| CVE-2021-47114 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption by fallocate When fallocate punches holes out of inode size, if original isize is in the middle of last cluster, then the part from isize to the end of the cluster will be zeroed with buffer write, at that time isize is not yet updated to match the new size, if writeback is kicked in, it will invoke ocfs2_writepage()->block_write_full_page() where the pages out of inode size will be dropped. That will cause file corruption. Fix this by zero out eof blocks when extending the inode size. Running the following command with qemu-image 4.2.1 can get a corrupted coverted image file easily. qemu-img convert -p -t none -T none -f qcow2 $qcow_image \ -O qcow2 -o compat=1.1 $qcow_image.conv The usage of fallocate in qemu is like this, it first punches holes out of inode size, then extend the inode size. fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2276196352, 65536) = 0 fallocate(11, 0, 2276196352, 65536) = 0 v1: https://www.spinics.net/lists/linux-fsdevel/msg193999.html v2: https://lore.kernel.org/linux-fsdevel/[email protected]/T/ |
| CVE-2021-47113 | In the Linux kernel, the following vulnerability has been resolved: btrfs: abort in rename_exchange if we fail to insert the second ref Error injection stress uncovered a problem where we'd leave a dangling inode ref if we failed during a rename_exchange. This happens because we insert the inode ref for one side of the rename, and then for the other side. If this second inode ref insert fails we'll leave the first one dangling and leave a corrupt file system behind. Fix this by aborting if we did the insert for the first inode ref. |
| CVE-2021-47112 | In the Linux kernel, the following vulnerability has been resolved: x86/kvm: Teardown PV features on boot CPU as well Various PV features (Async PF, PV EOI, steal time) work through memory shared with hypervisor and when we restore from hibernation we must properly teardown all these features to make sure hypervisor doesn't write to stale locations after we jump to the previously hibernated kernel (which can try to place anything there). For secondary CPUs the job is already done by kvm_cpu_down_prepare(), register syscore ops to do the same for boot CPU. |
| CVE-2021-47111 | In the Linux kernel, the following vulnerability has been resolved: xen-netback: take a reference to the RX task thread Do this in order to prevent the task from being freed if the thread returns (which can be triggered by the frontend) before the call to kthread_stop done as part of the backend tear down. Not taking the reference will lead to a use-after-free in that scenario. Such reference was taken before but dropped as part of the rework done in 2ac061ce97f4. Reintroduce the reference taking and add a comment this time explaining why it's needed. This is XSA-374 / CVE-2021-28691. |
| CVE-2021-47110 | In the Linux kernel, the following vulnerability has been resolved: x86/kvm: Disable kvmclock on all CPUs on shutdown Currenly, we disable kvmclock from machine_shutdown() hook and this only happens for boot CPU. We need to disable it for all CPUs to guard against memory corruption e.g. on restore from hibernate. Note, writing '0' to kvmclock MSR doesn't clear memory location, it just prevents hypervisor from updating the location so for the short while after write and while CPU is still alive, the clock remains usable and correct so we don't need to switch to some other clocksource. |
| CVE-2021-47109 | In the Linux kernel, the following vulnerability has been resolved: neighbour: allow NUD_NOARP entries to be forced GCed IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to fill up the neighbour table with enough entries that it will overflow for valid connections after that. This behaviour is more prevalent after commit 58956317c8de ("neighbor: Improve garbage collection") is applied, as it prevents removal from entries that are not NUD_FAILED, unless they are more than 5s old. |
| CVE-2021-47108 | In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf In commit 41ca9caaae0b ("drm/mediatek: hdmi: Add check for CEA modes only") a check for CEA modes was added to function mtk_hdmi_bridge_mode_valid() in order to address possible issues on MT8167; moreover, with commit c91026a938c2 ("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock") another similar check was introduced. Unfortunately though, at the time of writing, MT8173 does not provide any mtk_hdmi_conf structure and this is crashing the kernel with NULL pointer upon entering mtk_hdmi_bridge_mode_valid(), which happens as soon as a HDMI cable gets plugged in. To fix this regression, add a NULL pointer check for hdmi->conf in the said function, restoring HDMI functionality and avoiding NULL pointer kernel panics. |
| CVE-2021-47107 | In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix READDIR buffer overflow If a client sends a READDIR count argument that is too small (say, zero), then the buffer size calculation in the new init_dirlist helper functions results in an underflow, allowing the XDR stream functions to write beyond the actual buffer. This calculation has always been suspect. NFSD has never sanity- checked the READDIR count argument, but the old entry encoders managed the problem correctly. With the commits below, entry encoding changed, exposing the underflow to the pointer arithmetic in xdr_reserve_space(). Modern NFS clients attempt to retrieve as much data as possible for each READDIR request. Also, we have no unit tests that exercise the behavior of READDIR at the lower bound of @count values. Thus this case was missed during testing. |
| CVE-2021-47106 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix use-after-free in nft_set_catchall_destroy() We need to use list_for_each_entry_safe() iterator because we can not access @catchall after kfree_rcu() call. syzbot reported: BUG: KASAN: use-after-free in nft_set_catchall_destroy net/netfilter/nf_tables_api.c:4486 [inline] BUG: KASAN: use-after-free in nft_set_destroy net/netfilter/nf_tables_api.c:4504 [inline] BUG: KASAN: use-after-free in nft_set_destroy+0x3fd/0x4f0 net/netfilter/nf_tables_api.c:4493 Read of size 8 at addr ffff8880716e5b80 by task syz-executor.3/8871 CPU: 1 PID: 8871 Comm: syz-executor.3 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x2ed mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 nft_set_catchall_destroy net/netfilter/nf_tables_api.c:4486 [inline] nft_set_destroy net/netfilter/nf_tables_api.c:4504 [inline] nft_set_destroy+0x3fd/0x4f0 net/netfilter/nf_tables_api.c:4493 __nft_release_table+0x79f/0xcd0 net/netfilter/nf_tables_api.c:9626 nft_rcv_nl_event+0x4f8/0x670 net/netfilter/nf_tables_api.c:9688 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 blocking_notifier_call_chain kernel/notifier.c:318 [inline] blocking_notifier_call_chain+0x67/0x90 kernel/notifier.c:306 netlink_release+0xcb6/0x1dd0 net/netlink/af_netlink.c:788 __sock_release+0xcd/0x280 net/socket.c:649 sock_close+0x18/0x20 net/socket.c:1314 __fput+0x286/0x9f0 fs/file_table.c:280 task_work_run+0xdd/0x1a0 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x27e/0x290 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f75fbf28adb Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24 0c e8 63 fc ff ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 fc ff ff 8b 44 RSP: 002b:00007ffd8da7ec10 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f75fbf28adb RDX: 00007f75fc08e828 RSI: ffffffffffffffff RDI: 0000000000000003 RBP: 00007f75fc08a960 R08: 0000000000000000 R09: 00007f75fc08e830 R10: 00007ffd8da7ed10 R11: 0000000000000293 R12: 00000000002067c3 R13: 00007ffd8da7ed10 R14: 00007f75fc088f60 R15: 0000000000000032 </TASK> Allocated by task 8886: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] ____kasan_kmalloc mm/kasan/common.c:513 [inline] ____kasan_kmalloc mm/kasan/common.c:472 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:522 kasan_kmalloc include/linux/kasan.h:269 [inline] kmem_cache_alloc_trace+0x1ea/0x4a0 mm/slab.c:3575 kmalloc include/linux/slab.h:590 [inline] nft_setelem_catchall_insert net/netfilter/nf_tables_api.c:5544 [inline] nft_setelem_insert net/netfilter/nf_tables_api.c:5562 [inline] nft_add_set_elem+0x232e/0x2f40 net/netfilter/nf_tables_api.c:5936 nf_tables_newsetelem+0x6ff/0xbb0 net/netfilter/nf_tables_api.c:6032 nfnetlink_rcv_batch+0x1710/0x25f0 net/netfilter/nfnetlink.c:513 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:652 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/ ---truncated--- |
| CVE-2021-47105 | In the Linux kernel, the following vulnerability has been resolved: ice: xsk: return xsk buffers back to pool when cleaning the ring Currently we only NULL the xdp_buff pointer in the internal SW ring but we never give it back to the xsk buffer pool. This means that buffers can be leaked out of the buff pool and never be used again. Add missing xsk_buff_free() call to the routine that is supposed to clean the entries that are left in the ring so that these buffers in the umem can be used by other sockets. Also, only go through the space that is actually left to be cleaned instead of a whole ring. |
| CVE-2021-47104 | In the Linux kernel, the following vulnerability has been resolved: IB/qib: Fix memory leak in qib_user_sdma_queue_pkts() The wrong goto label was used for the error case and missed cleanup of the pkt allocation. Addresses-Coverity-ID: 1493352 ("Resource leak") |
| CVE-2021-47103 | In the Linux kernel, the following vulnerability has been resolved: inet: fully convert sk->sk_rx_dst to RCU rules syzbot reported various issues around early demux, one being included in this changelog [1] sk->sk_rx_dst is using RCU protection without clearly documenting it. And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv() are not following standard RCU rules. [a] dst_release(dst); [b] sk->sk_rx_dst = NULL; They look wrong because a delete operation of RCU protected pointer is supposed to clear the pointer before the call_rcu()/synchronize_rcu() guarding actual memory freeing. In some cases indeed, dst could be freed before [b] is done. We could cheat by clearing sk_rx_dst before calling dst_release(), but this seems the right time to stick to standard RCU annotations and debugging facilities. [1] BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline] BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204 CPU: 0 PID: 9204 Comm: syz-executor.5 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 dst_check include/net/dst.h:470 [inline] tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 ip_rcv_finish_core.constprop.0+0x15de/0x1e80 net/ipv4/ip_input.c:340 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 common_interrupt+0x52/0xc0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:629 RIP: 0033:0x7f5e972bfd57 Code: 39 d1 73 14 0f 1f 80 00 00 00 00 48 8b 50 f8 48 83 e8 08 48 39 ca 77 f3 48 39 c3 73 3e 48 89 13 48 8b 50 f8 48 89 38 49 8b 0e <48> 8b 3e 48 83 c3 08 48 83 c6 08 eb bc 48 39 d1 72 9e 48 39 d0 73 RSP: 002b:00007fff8a413210 EFLAGS: 00000283 RAX: 00007f5e97108990 RBX: 00007f5e97108338 RCX: ffffffff81d3aa45 RDX: ffffffff81d3aa45 RSI: 00007f5e97108340 RDI: ffffffff81d3aa45 RBP: 00007f5e97107eb8 R08: 00007f5e97108d88 R09: 0000000093c2e8d9 R10: 0000000000000000 R11: 0000000000000000 R12: 00007f5e97107eb0 R13: 00007f5e97108338 R14: 00007f5e97107ea8 R15: 0000000000000019 </TASK> Allocated by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 ip_route_input_slow+0x1817/0x3a20 net/ipv4/route.c:234 ---truncated--- |
| CVE-2021-47102 | In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix incorrect structure access In line: upper = info->upper_dev; We access upper_dev field, which is related only for particular events (e.g. event == NETDEV_CHANGEUPPER). So, this line cause invalid memory access for another events, when ptr is not netdev_notifier_changeupper_info. The KASAN logs are as follows: [ 30.123165] BUG: KASAN: stack-out-of-bounds in prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.133336] Read of size 8 at addr ffff80000cf772b0 by task udevd/778 [ 30.139866] [ 30.141398] CPU: 0 PID: 778 Comm: udevd Not tainted 5.16.0-rc3 #6 [ 30.147588] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 30.153056] Call trace: [ 30.155547] dump_backtrace+0x0/0x2c0 [ 30.159320] show_stack+0x18/0x30 [ 30.162729] dump_stack_lvl+0x68/0x84 [ 30.166491] print_address_description.constprop.0+0x74/0x2b8 [ 30.172346] kasan_report+0x1e8/0x250 [ 30.176102] __asan_load8+0x98/0xe0 [ 30.179682] prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.186847] prestera_netdev_event_handler+0x1b4/0x1c0 [prestera] [ 30.193313] raw_notifier_call_chain+0x74/0xa0 [ 30.197860] call_netdevice_notifiers_info+0x68/0xc0 [ 30.202924] register_netdevice+0x3cc/0x760 [ 30.207190] register_netdev+0x24/0x50 [ 30.211015] prestera_device_register+0x8a0/0xba0 [prestera] |
| CVE-2021-47101 | In the Linux kernel, the following vulnerability has been resolved: asix: fix uninit-value in asix_mdio_read() asix_read_cmd() may read less than sizeof(smsr) bytes and in this case smsr will be uninitialized. Fail log: BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 BUG: KMSAN: uninit-value in asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497 asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497 |
| CVE-2021-47100 | In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler module Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandl ---truncated--- |
| CVE-2021-47099 | In the Linux kernel, the following vulnerability has been resolved: veth: ensure skb entering GRO are not cloned. After commit d3256efd8e8b ("veth: allow enabling NAPI even without XDP"), if GRO is enabled on a veth device and TSO is disabled on the peer device, TCP skbs will go through the NAPI callback. If there is no XDP program attached, the veth code does not perform any share check, and shared/cloned skbs could enter the GRO engine. Ignat reported a BUG triggered later-on due to the above condition: [ 53.970529][ C1] kernel BUG at net/core/skbuff.c:3574! [ 53.981755][ C1] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.982634][ C1] CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc5+ #25 [ 53.982634][ C1] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 53.982634][ C1] RIP: 0010:skb_shift+0x13ef/0x23b0 [ 53.982634][ C1] Code: ea 03 0f b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 41 0c 00 00 41 80 7f 02 00 4d 8d b5 d0 00 00 00 0f 85 74 f5 ff ff <0f> 0b 4d 8d 77 20 be 04 00 00 00 4c 89 44 24 78 4c 89 f7 4c 89 8c [ 53.982634][ C1] RSP: 0018:ffff8881008f7008 EFLAGS: 00010246 [ 53.982634][ C1] RAX: 0000000000000000 RBX: ffff8881180b4c80 RCX: 0000000000000000 [ 53.982634][ C1] RDX: 0000000000000002 RSI: ffff8881180b4d3c RDI: ffff88810bc9cac2 [ 53.982634][ C1] RBP: ffff8881008f70b8 R08: ffff8881180b4cf4 R09: ffff8881180b4cf0 [ 53.982634][ C1] R10: ffffed1022999e5c R11: 0000000000000002 R12: 0000000000000590 [ 53.982634][ C1] R13: ffff88810f940c80 R14: ffff88810f940d50 R15: ffff88810bc9cac0 [ 53.982634][ C1] FS: 0000000000000000(0000) GS:ffff888235880000(0000) knlGS:0000000000000000 [ 53.982634][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.982634][ C1] CR2: 00007ff5f9b86680 CR3: 0000000108ce8004 CR4: 0000000000170ee0 [ 53.982634][ C1] Call Trace: [ 53.982634][ C1] <TASK> [ 53.982634][ C1] tcp_sacktag_walk+0xaba/0x18e0 [ 53.982634][ C1] tcp_sacktag_write_queue+0xe7b/0x3460 [ 53.982634][ C1] tcp_ack+0x2666/0x54b0 [ 53.982634][ C1] tcp_rcv_established+0x4d9/0x20f0 [ 53.982634][ C1] tcp_v4_do_rcv+0x551/0x810 [ 53.982634][ C1] tcp_v4_rcv+0x22ed/0x2ed0 [ 53.982634][ C1] ip_protocol_deliver_rcu+0x96/0xaf0 [ 53.982634][ C1] ip_local_deliver_finish+0x1e0/0x2f0 [ 53.982634][ C1] ip_sublist_rcv_finish+0x211/0x440 [ 53.982634][ C1] ip_list_rcv_finish.constprop.0+0x424/0x660 [ 53.982634][ C1] ip_list_rcv+0x2c8/0x410 [ 53.982634][ C1] __netif_receive_skb_list_core+0x65c/0x910 [ 53.982634][ C1] netif_receive_skb_list_internal+0x5f9/0xcb0 [ 53.982634][ C1] napi_complete_done+0x188/0x6e0 [ 53.982634][ C1] gro_cell_poll+0x10c/0x1d0 [ 53.982634][ C1] __napi_poll+0xa1/0x530 [ 53.982634][ C1] net_rx_action+0x567/0x1270 [ 53.982634][ C1] __do_softirq+0x28a/0x9ba [ 53.982634][ C1] run_ksoftirqd+0x32/0x60 [ 53.982634][ C1] smpboot_thread_fn+0x559/0x8c0 [ 53.982634][ C1] kthread+0x3b9/0x490 [ 53.982634][ C1] ret_from_fork+0x22/0x30 [ 53.982634][ C1] </TASK> Address the issue by skipping the GRO stage for shared or cloned skbs. To reduce the chance of OoO, try to unclone the skbs before giving up. v1 -> v2: - use avoid skb_copy and fallback to netif_receive_skb - Eric |
| CVE-2021-47098 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations Commit b50aa49638c7 ("hwmon: (lm90) Prevent integer underflows of temperature calculations") addressed a number of underflow situations when writing temperature limits. However, it missed one situation, seen when an attempt is made to set the hysteresis value to MAX_LONG and the critical temperature limit is negative. Use clamp_val() when setting the hysteresis temperature to ensure that the provided value can never overflow or underflow. |
| CVE-2021-47097 | In the Linux kernel, the following vulnerability has been resolved: Input: elantech - fix stack out of bound access in elantech_change_report_id() The array param[] in elantech_change_report_id() must be at least 3 bytes, because elantech_read_reg_params() is calling ps2_command() with PSMOUSE_CMD_GETINFO, that is going to access 3 bytes from param[], but it's defined in the stack as an array of 2 bytes, therefore we have a potential stack out-of-bounds access here, also confirmed by KASAN: [ 6.512374] BUG: KASAN: stack-out-of-bounds in __ps2_command+0x372/0x7e0 [ 6.512397] Read of size 1 at addr ffff8881024d77c2 by task kworker/2:1/118 [ 6.512416] CPU: 2 PID: 118 Comm: kworker/2:1 Not tainted 5.13.0-22-generic #22+arighi20211110 [ 6.512428] Hardware name: LENOVO 20T8000QGE/20T8000QGE, BIOS R1AET32W (1.08 ) 08/14/2020 [ 6.512436] Workqueue: events_long serio_handle_event [ 6.512453] Call Trace: [ 6.512462] show_stack+0x52/0x58 [ 6.512474] dump_stack+0xa1/0xd3 [ 6.512487] print_address_description.constprop.0+0x1d/0x140 [ 6.512502] ? __ps2_command+0x372/0x7e0 [ 6.512516] __kasan_report.cold+0x7d/0x112 [ 6.512527] ? _raw_write_lock_irq+0x20/0xd0 [ 6.512539] ? __ps2_command+0x372/0x7e0 [ 6.512552] kasan_report+0x3c/0x50 [ 6.512564] __asan_load1+0x6a/0x70 [ 6.512575] __ps2_command+0x372/0x7e0 [ 6.512589] ? ps2_drain+0x240/0x240 [ 6.512601] ? dev_printk_emit+0xa2/0xd3 [ 6.512612] ? dev_vprintk_emit+0xc5/0xc5 [ 6.512621] ? __kasan_check_write+0x14/0x20 [ 6.512634] ? mutex_lock+0x8f/0xe0 [ 6.512643] ? __mutex_lock_slowpath+0x20/0x20 [ 6.512655] ps2_command+0x52/0x90 [ 6.512670] elantech_ps2_command+0x4f/0xc0 [psmouse] [ 6.512734] elantech_change_report_id+0x1e6/0x256 [psmouse] [ 6.512799] ? elantech_report_trackpoint.constprop.0.cold+0xd/0xd [psmouse] [ 6.512863] ? ps2_command+0x7f/0x90 [ 6.512877] elantech_query_info.cold+0x6bd/0x9ed [psmouse] [ 6.512943] ? elantech_setup_ps2+0x460/0x460 [psmouse] [ 6.513005] ? psmouse_reset+0x69/0xb0 [psmouse] [ 6.513064] ? psmouse_attr_set_helper+0x2a0/0x2a0 [psmouse] [ 6.513122] ? phys_pmd_init+0x30e/0x521 [ 6.513137] elantech_init+0x8a/0x200 [psmouse] [ 6.513200] ? elantech_init_ps2+0xf0/0xf0 [psmouse] [ 6.513249] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513296] ? synaptics_send_cmd+0x60/0x60 [psmouse] [ 6.513342] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513388] ? psmouse_try_protocol+0x11e/0x170 [psmouse] [ 6.513432] psmouse_extensions+0x65d/0x6e0 [psmouse] [ 6.513476] ? psmouse_try_protocol+0x170/0x170 [psmouse] [ 6.513519] ? mutex_unlock+0x22/0x40 [ 6.513526] ? ps2_command+0x7f/0x90 [ 6.513536] ? psmouse_probe+0xa3/0xf0 [psmouse] [ 6.513580] psmouse_switch_protocol+0x27d/0x2e0 [psmouse] [ 6.513624] psmouse_connect+0x272/0x530 [psmouse] [ 6.513669] serio_driver_probe+0x55/0x70 [ 6.513679] really_probe+0x190/0x720 [ 6.513689] driver_probe_device+0x160/0x1f0 [ 6.513697] device_driver_attach+0x119/0x130 [ 6.513705] ? device_driver_attach+0x130/0x130 [ 6.513713] __driver_attach+0xe7/0x1a0 [ 6.513720] ? device_driver_attach+0x130/0x130 [ 6.513728] bus_for_each_dev+0xfb/0x150 [ 6.513738] ? subsys_dev_iter_exit+0x10/0x10 [ 6.513748] ? _raw_write_unlock_bh+0x30/0x30 [ 6.513757] driver_attach+0x2d/0x40 [ 6.513764] serio_handle_event+0x199/0x3d0 [ 6.513775] process_one_work+0x471/0x740 [ 6.513785] worker_thread+0x2d2/0x790 [ 6.513794] ? process_one_work+0x740/0x740 [ 6.513802] kthread+0x1b4/0x1e0 [ 6.513809] ? set_kthread_struct+0x80/0x80 [ 6.513816] ret_from_fork+0x22/0x30 [ 6.513832] The buggy address belongs to the page: [ 6.513838] page:00000000bc35e189 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1024d7 [ 6.513847] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ 6.513860] raw: 0 ---truncated--- |
| CVE-2021-47096 | In the Linux kernel, the following vulnerability has been resolved: ALSA: rawmidi - fix the uninitalized user_pversion The user_pversion was uninitialized for the user space file structure in the open function, because the file private structure use kmalloc for the allocation. The kernel ALSA sequencer code clears the file structure, so no additional fixes are required. BugLink: https://github.com/alsa-project/alsa-lib/issues/178 |
| CVE-2021-47095 | In the Linux kernel, the following vulnerability has been resolved: ipmi: ssif: initialize ssif_info->client early During probe ssif_info->client is dereferenced in error path. However, it is set when some of the error checking has already been done. This causes following kernel crash if an error path is taken: [ 30.645593][ T674] ipmi_ssif 0-000e: ipmi_ssif: Not probing, Interface already present [ 30.657616][ T674] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 ... [ 30.657723][ T674] pc : __dev_printk+0x28/0xa0 [ 30.657732][ T674] lr : _dev_err+0x7c/0xa0 ... [ 30.657772][ T674] Call trace: [ 30.657775][ T674] __dev_printk+0x28/0xa0 [ 30.657778][ T674] _dev_err+0x7c/0xa0 [ 30.657781][ T674] ssif_probe+0x548/0x900 [ipmi_ssif 62ce4b08badc1458fd896206d9ef69a3c31f3d3e] [ 30.657791][ T674] i2c_device_probe+0x37c/0x3c0 ... Initialize ssif_info->client before any error path can be taken. Clear i2c_client data in the error path to prevent the dangling pointer from leaking. |
| CVE-2021-47094 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Don't advance iterator after restart due to yielding After dropping mmu_lock in the TDP MMU, restart the iterator during tdp_iter_next() and do not advance the iterator. Advancing the iterator results in skipping the top-level SPTE and all its children, which is fatal if any of the skipped SPTEs were not visited before yielding. When zapping all SPTEs, i.e. when min_level == root_level, restarting the iter and then invoking tdp_iter_next() is always fatal if the current gfn has as a valid SPTE, as advancing the iterator results in try_step_side() skipping the current gfn, which wasn't visited before yielding. Sprinkle WARNs on iter->yielded being true in various helpers that are often used in conjunction with yielding, and tag the helper with __must_check to reduce the probabily of improper usage. Failing to zap a top-level SPTE manifests in one of two ways. If a valid SPTE is skipped by both kvm_tdp_mmu_zap_all() and kvm_tdp_mmu_put_root(), the shadow page will be leaked and KVM will WARN accordingly. WARNING: CPU: 1 PID: 3509 at arch/x86/kvm/mmu/tdp_mmu.c:46 [kvm] RIP: 0010:kvm_mmu_uninit_tdp_mmu+0x3e/0x50 [kvm] Call Trace: <TASK> kvm_arch_destroy_vm+0x130/0x1b0 [kvm] kvm_destroy_vm+0x162/0x2a0 [kvm] kvm_vcpu_release+0x34/0x60 [kvm] __fput+0x82/0x240 task_work_run+0x5c/0x90 do_exit+0x364/0xa10 ? futex_unqueue+0x38/0x60 do_group_exit+0x33/0xa0 get_signal+0x155/0x850 arch_do_signal_or_restart+0xed/0x750 exit_to_user_mode_prepare+0xc5/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae If kvm_tdp_mmu_zap_all() skips a gfn/SPTE but that SPTE is then zapped by kvm_tdp_mmu_put_root(), KVM triggers a use-after-free in the form of marking a struct page as dirty/accessed after it has been put back on the free list. This directly triggers a WARN due to encountering a page with page_count() == 0, but it can also lead to data corruption and additional errors in the kernel. WARNING: CPU: 7 PID: 1995658 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:171 RIP: 0010:kvm_is_zone_device_pfn.part.0+0x9e/0xd0 [kvm] Call Trace: <TASK> kvm_set_pfn_dirty+0x120/0x1d0 [kvm] __handle_changed_spte+0x92e/0xca0 [kvm] __handle_changed_spte+0x63c/0xca0 [kvm] __handle_changed_spte+0x63c/0xca0 [kvm] __handle_changed_spte+0x63c/0xca0 [kvm] zap_gfn_range+0x549/0x620 [kvm] kvm_tdp_mmu_put_root+0x1b6/0x270 [kvm] mmu_free_root_page+0x219/0x2c0 [kvm] kvm_mmu_free_roots+0x1b4/0x4e0 [kvm] kvm_mmu_unload+0x1c/0xa0 [kvm] kvm_arch_destroy_vm+0x1f2/0x5c0 [kvm] kvm_put_kvm+0x3b1/0x8b0 [kvm] kvm_vcpu_release+0x4e/0x70 [kvm] __fput+0x1f7/0x8c0 task_work_run+0xf8/0x1a0 do_exit+0x97b/0x2230 do_group_exit+0xda/0x2a0 get_signal+0x3be/0x1e50 arch_do_signal_or_restart+0x244/0x17f0 exit_to_user_mode_prepare+0xcb/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x4d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Note, the underlying bug existed even before commit 1af4a96025b3 ("KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed") moved calls to tdp_mmu_iter_cond_resched() to the beginning of loops, as KVM could still incorrectly advance past a top-level entry when yielding on a lower-level entry. But with respect to leaking shadow pages, the bug was introduced by yielding before processing the current gfn. Alternatively, tdp_mmu_iter_cond_resched() could simply fall through, or callers could jump to their "retry" label. The downside of that approach is that tdp_mmu_iter_cond_resched() _must_ be called before anything else in the loop, and there's no easy way to enfornce that requirement. Ideally, KVM would handling the cond_resched() fully within the iterator macro (the code is actually quite clean) and avoid this entire class of bugs, but that is extremely difficult do wh ---truncated--- |
| CVE-2021-47093 | In the Linux kernel, the following vulnerability has been resolved: platform/x86: intel_pmc_core: fix memleak on registration failure In case device registration fails during module initialisation, the platform device structure needs to be freed using platform_device_put() to properly free all resources (e.g. the device name). |
| CVE-2021-47092 | In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Always clear vmx->fail on emulation_required Revert a relatively recent change that set vmx->fail if the vCPU is in L2 and emulation_required is true, as that behavior is completely bogus. Setting vmx->fail and synthesizing a VM-Exit is contradictory and wrong: (a) it's impossible to have both a VM-Fail and VM-Exit (b) vmcs.EXIT_REASON is not modified on VM-Fail (c) emulation_required refers to guest state and guest state checks are always VM-Exits, not VM-Fails. For KVM specifically, emulation_required is handled before nested exits in __vmx_handle_exit(), thus setting vmx->fail has no immediate effect, i.e. KVM calls into handle_invalid_guest_state() and vmx->fail is ignored. Setting vmx->fail can ultimately result in a WARN in nested_vmx_vmexit() firing when tearing down the VM as KVM never expects vmx->fail to be set when L2 is active, KVM always reflects those errors into L1. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 21158 at arch/x86/kvm/vmx/nested.c:4548 nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Modules linked in: CPU: 0 PID: 21158 Comm: syz-executor.1 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Code: <0f> 0b e9 2e f8 ff ff e8 57 b3 5d 00 0f 0b e9 00 f1 ff ff 89 e9 80 Call Trace: vmx_leave_nested arch/x86/kvm/vmx/nested.c:6220 [inline] nested_vmx_free_vcpu+0x83/0xc0 arch/x86/kvm/vmx/nested.c:330 vmx_free_vcpu+0x11f/0x2a0 arch/x86/kvm/vmx/vmx.c:6799 kvm_arch_vcpu_destroy+0x6b/0x240 arch/x86/kvm/x86.c:10989 kvm_vcpu_destroy+0x29/0x90 arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 kvm_free_vcpus arch/x86/kvm/x86.c:11426 [inline] kvm_arch_destroy_vm+0x3ef/0x6b0 arch/x86/kvm/x86.c:11545 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1189 [inline] kvm_put_kvm+0x751/0xe40 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1220 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3489 __fput+0x3fc/0x870 fs/file_table.c:280 task_work_run+0x146/0x1c0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0x705/0x24f0 kernel/exit.c:832 do_group_exit+0x168/0x2d0 kernel/exit.c:929 get_signal+0x1740/0x2120 kernel/signal.c:2852 arch_do_signal_or_restart+0x9c/0x730 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x191/0x220 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x2e/0x70 kernel/entry/common.c:300 do_syscall_64+0x53/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47091 | In the Linux kernel, the following vulnerability has been resolved: mac80211: fix locking in ieee80211_start_ap error path We need to hold the local->mtx to release the channel context, as even encoded by the lockdep_assert_held() there. Fix it. |
| CVE-2021-47090 | In the Linux kernel, the following vulnerability has been resolved: mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page() Hulk Robot reported a panic in put_page_testzero() when testing madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying get_any_page(). This is because we keep MF_COUNT_INCREASED flag in second try but the refcnt is not increased. page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:737! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: release_pages+0x53f/0x840 Call Trace: free_pages_and_swap_cache+0x64/0x80 tlb_flush_mmu+0x6f/0x220 unmap_page_range+0xe6c/0x12c0 unmap_single_vma+0x90/0x170 unmap_vmas+0xc4/0x180 exit_mmap+0xde/0x3a0 mmput+0xa3/0x250 do_exit+0x564/0x1470 do_group_exit+0x3b/0x100 __do_sys_exit_group+0x13/0x20 __x64_sys_exit_group+0x16/0x20 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: ---[ end trace e99579b570fe0649 ]--- RIP: 0010:release_pages+0x53f/0x840 |
| CVE-2021-47089 | In the Linux kernel, the following vulnerability has been resolved: kfence: fix memory leak when cat kfence objects Hulk robot reported a kmemleak problem: unreferenced object 0xffff93d1d8cc02e8 (size 248): comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s) hex dump (first 32 bytes): 00 40 85 19 d4 93 ff ff 00 10 00 00 00 00 00 00 .@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: seq_open+0x2a/0x80 full_proxy_open+0x167/0x1e0 do_dentry_open+0x1e1/0x3a0 path_openat+0x961/0xa20 do_filp_open+0xae/0x120 do_sys_openat2+0x216/0x2f0 do_sys_open+0x57/0x80 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff93d419854000 (size 4096): comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s) hex dump (first 32 bytes): 6b 66 65 6e 63 65 2d 23 32 35 30 3a 20 30 78 30 kfence-#250: 0x0 30 30 30 30 30 30 30 37 35 34 62 64 61 31 32 2d 0000000754bda12- backtrace: seq_read_iter+0x313/0x440 seq_read+0x14b/0x1a0 full_proxy_read+0x56/0x80 vfs_read+0xa5/0x1b0 ksys_read+0xa0/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 I find that we can easily reproduce this problem with the following commands: cat /sys/kernel/debug/kfence/objects echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak The leaked memory is allocated in the stack below: do_syscall_64 do_sys_open do_dentry_open full_proxy_open seq_open ---> alloc seq_file vfs_read full_proxy_read seq_read seq_read_iter traverse ---> alloc seq_buf And it should have been released in the following process: do_syscall_64 syscall_exit_to_user_mode exit_to_user_mode_prepare task_work_run ____fput __fput full_proxy_release ---> free here However, the release function corresponding to file_operations is not implemented in kfence. As a result, a memory leak occurs. Therefore, the solution to this problem is to implement the corresponding release function. |
| CVE-2021-47088 | In the Linux kernel, the following vulnerability has been resolved: mm/damon/dbgfs: protect targets destructions with kdamond_lock DAMON debugfs interface iterates current monitoring targets in 'dbgfs_target_ids_read()' while holding the corresponding 'kdamond_lock'. However, it also destructs the monitoring targets in 'dbgfs_before_terminate()' without holding the lock. This can result in a use_after_free bug. This commit avoids the race by protecting the destruction with the corresponding 'kdamond_lock'. |
| CVE-2021-47087 | In the Linux kernel, the following vulnerability has been resolved: tee: optee: Fix incorrect page free bug Pointer to the allocated pages (struct page *page) has already progressed towards the end of allocation. It is incorrect to perform __free_pages(page, order) using this pointer as we would free any arbitrary pages. Fix this by stop modifying the page pointer. |
| CVE-2021-47086 | In the Linux kernel, the following vulnerability has been resolved: phonet/pep: refuse to enable an unbound pipe This ioctl() implicitly assumed that the socket was already bound to a valid local socket name, i.e. Phonet object. If the socket was not bound, two separate problems would occur: 1) We'd send an pipe enablement request with an invalid source object. 2) Later socket calls could BUG on the socket unexpectedly being connected yet not bound to a valid object. |
| CVE-2021-47083 | In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: fix global-out-of-bounds issue When eint virtual eint number is greater than gpio number, it maybe produce 'desc[eint_n]' size globle-out-of-bounds issue. |
| CVE-2021-47082 | In the Linux kernel, the following vulnerability has been resolved: tun: avoid double free in tun_free_netdev Avoid double free in tun_free_netdev() by moving the dev->tstats and tun->security allocs to a new ndo_init routine (tun_net_init()) that will be called by register_netdevice(). ndo_init is paired with the desctructor (tun_free_netdev()), so if there's an error in register_netdevice() the destructor will handle the frees. BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 CPU: 0 PID: 25750 Comm: syz-executor416 Not tainted 5.16.0-rc2-syzk #1 Hardware name: Red Hat KVM, BIOS Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:247 kasan_report_invalid_free+0x55/0x80 mm/kasan/report.c:372 ____kasan_slab_free mm/kasan/common.c:346 [inline] __kasan_slab_free+0x107/0x120 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:1723 [inline] slab_free_freelist_hook mm/slub.c:1749 [inline] slab_free mm/slub.c:3513 [inline] kfree+0xac/0x2d0 mm/slub.c:4561 selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 security_tun_dev_free_security+0x4f/0x90 security/security.c:2342 tun_free_netdev+0xe6/0x150 drivers/net/tun.c:2215 netdev_run_todo+0x4df/0x840 net/core/dev.c:10627 rtnl_unlock+0x13/0x20 net/core/rtnetlink.c:112 __tun_chr_ioctl+0x80c/0x2870 drivers/net/tun.c:3302 tun_chr_ioctl+0x2f/0x40 drivers/net/tun.c:3311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47081 | In the Linux kernel, the following vulnerability has been resolved: habanalabs/gaudi: Fix a potential use after free in gaudi_memset_device_memory Our code analyzer reported a uaf. In gaudi_memset_device_memory, cb is get via hl_cb_kernel_create() with 2 refcount. If hl_cs_allocate_job() failed, the execution runs into release_cb branch. One ref of cb is dropped by hl_cb_put(cb) and could be freed if other thread also drops one ref. Then cb is used by cb->id later, which is a potential uaf. My patch add a variable 'id' to accept the value of cb->id before the hl_cb_put(cb) is called, to avoid the potential uaf. |
| CVE-2021-47080 | In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Prevent divide-by-zero error triggered by the user The user_entry_size is supplied by the user and later used as a denominator to calculate number of entries. The zero supplied by the user will trigger the following divide-by-zero error: divide error: 0000 [#1] SMP KASAN PTI CPU: 4 PID: 497 Comm: c_repro Not tainted 5.13.0-rc1+ #281 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE+0x1b1/0x510 Code: 87 59 03 00 00 e8 9f ab 1e ff 48 8d bd a8 00 00 00 e8 d3 70 41 ff 44 0f b7 b5 a8 00 00 00 e8 86 ab 1e ff 31 d2 4c 89 f0 31 ff <49> f7 f5 48 89 d6 48 89 54 24 10 48 89 04 24 e8 1b ad 1e ff 48 8b RSP: 0018:ffff88810416f828 EFLAGS: 00010246 RAX: 0000000000000008 RBX: 1ffff1102082df09 RCX: ffffffff82183f3d RDX: 0000000000000000 RSI: ffff888105f2da00 RDI: 0000000000000000 RBP: ffff88810416fa98 R08: 0000000000000001 R09: ffffed102082df5f R10: ffff88810416faf7 R11: ffffed102082df5e R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000008 R15: ffff88810416faf0 FS: 00007f5715efa740(0000) GS:ffff88811a700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000840 CR3: 000000010c2e0001 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ib_uverbs_handler_UVERBS_METHOD_INFO_HANDLES+0x4b0/0x4b0 ib_uverbs_cmd_verbs+0x1546/0x1940 ib_uverbs_ioctl+0x186/0x240 __x64_sys_ioctl+0x38a/0x1220 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47079 | In the Linux kernel, the following vulnerability has been resolved: platform/x86: ideapad-laptop: fix a NULL pointer dereference The third parameter of dytc_cql_command should not be NULL since it will be dereferenced immediately. |
| CVE-2021-47078 | In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Clear all QP fields if creation failed rxe_qp_do_cleanup() relies on valid pointer values in QP for the properly created ones, but in case rxe_qp_from_init() failed it was filled with garbage and caused tot the following error. refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 12560 at lib/refcount.c:28 refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28 Modules linked in: CPU: 1 PID: 12560 Comm: syz-executor.4 Not tainted 5.12.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28 Code: e9 db fe ff ff 48 89 df e8 2c c2 ea fd e9 8a fe ff ff e8 72 6a a7 fd 48 c7 c7 e0 b2 c1 89 c6 05 dc 3a e6 09 01 e8 ee 74 fb 04 <0f> 0b e9 af fe ff ff 0f 1f 84 00 00 00 00 00 41 56 41 55 41 54 55 RSP: 0018:ffffc900097ceba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff815bb075 RDI: fffff520012f9d67 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815b4eae R11: 0000000000000000 R12: ffff8880322a4800 R13: ffff8880322a4940 R14: ffff888033044e00 R15: 0000000000000000 FS: 00007f6eb2be3700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdbe5d41000 CR3: 000000001d181000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __refcount_sub_and_test include/linux/refcount.h:283 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] kref_put include/linux/kref.h:64 [inline] rxe_qp_do_cleanup+0x96f/0xaf0 drivers/infiniband/sw/rxe/rxe_qp.c:805 execute_in_process_context+0x37/0x150 kernel/workqueue.c:3327 rxe_elem_release+0x9f/0x180 drivers/infiniband/sw/rxe/rxe_pool.c:391 kref_put include/linux/kref.h:65 [inline] rxe_create_qp+0x2cd/0x310 drivers/infiniband/sw/rxe/rxe_verbs.c:425 _ib_create_qp drivers/infiniband/core/core_priv.h:331 [inline] ib_create_named_qp+0x2ad/0x1370 drivers/infiniband/core/verbs.c:1231 ib_create_qp include/rdma/ib_verbs.h:3644 [inline] create_mad_qp+0x177/0x2d0 drivers/infiniband/core/mad.c:2920 ib_mad_port_open drivers/infiniband/core/mad.c:3001 [inline] ib_mad_init_device+0xd6f/0x1400 drivers/infiniband/core/mad.c:3092 add_client_context+0x405/0x5e0 drivers/infiniband/core/device.c:717 enable_device_and_get+0x1cd/0x3b0 drivers/infiniband/core/device.c:1331 ib_register_device drivers/infiniband/core/device.c:1413 [inline] ib_register_device+0x7c7/0xa50 drivers/infiniband/core/device.c:1365 rxe_register_device+0x3d5/0x4a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1147 rxe_add+0x12fe/0x16d0 drivers/infiniband/sw/rxe/rxe.c:247 rxe_net_add+0x8c/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:503 rxe_newlink drivers/infiniband/sw/rxe/rxe.c:269 [inline] rxe_newlink+0xb7/0xe0 drivers/infiniband/sw/rxe/rxe.c:250 nldev_newlink+0x30e/0x550 drivers/infiniband/core/nldev.c:1555 rdma_nl_rcv_msg+0x36d/0x690 drivers/infiniband/core/netlink.c:195 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x2ee/0x430 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0 ---truncated--- |
| CVE-2021-47077 | In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Add pointer checks in qedf_update_link_speed() The following trace was observed: [ 14.042059] Call Trace: [ 14.042061] <IRQ> [ 14.042068] qedf_link_update+0x144/0x1f0 [qedf] [ 14.042117] qed_link_update+0x5c/0x80 [qed] [ 14.042135] qed_mcp_handle_link_change+0x2d2/0x410 [qed] [ 14.042155] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042170] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042186] ? qed_rd+0x13/0x40 [qed] [ 14.042205] qed_mcp_handle_events+0x437/0x690 [qed] [ 14.042221] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042239] qed_int_sp_dpc+0x3a6/0x3e0 [qed] [ 14.042245] tasklet_action_common.isra.14+0x5a/0x100 [ 14.042250] __do_softirq+0xe4/0x2f8 [ 14.042253] irq_exit+0xf7/0x100 [ 14.042255] do_IRQ+0x7f/0xd0 [ 14.042257] common_interrupt+0xf/0xf [ 14.042259] </IRQ> API qedf_link_update() is getting called from QED but by that time shost_data is not initialised. This results in a NULL pointer dereference when we try to dereference shost_data while updating supported_speeds. Add a NULL pointer check before dereferencing shost_data. |
| CVE-2021-47076 | In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Return CQE error if invalid lkey was supplied RXE is missing update of WQE status in LOCAL_WRITE failures. This caused the following kernel panic if someone sent an atomic operation with an explicitly wrong lkey. [leonro@vm ~]$ mkt test test_atomic_invalid_lkey (tests.test_atomic.AtomicTest) ... WARNING: CPU: 5 PID: 263 at drivers/infiniband/sw/rxe/rxe_comp.c:740 rxe_completer+0x1a6d/0x2e30 [rdma_rxe] Modules linked in: crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel rdma_ucm rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core ptp pps_core CPU: 5 PID: 263 Comm: python3 Not tainted 5.13.0-rc1+ #2936 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:rxe_completer+0x1a6d/0x2e30 [rdma_rxe] Code: 03 0f 8e 65 0e 00 00 3b 93 10 06 00 00 0f 84 82 0a 00 00 4c 89 ff 4c 89 44 24 38 e8 2d 74 a9 e1 4c 8b 44 24 38 e9 1c f5 ff ff <0f> 0b e9 0c e8 ff ff b8 05 00 00 00 41 bf 05 00 00 00 e9 ab e7 ff RSP: 0018:ffff8880158af090 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888016a78000 RCX: ffffffffa0cf1652 RDX: 1ffff9200004b442 RSI: 0000000000000004 RDI: ffffc9000025a210 RBP: dffffc0000000000 R08: 00000000ffffffea R09: ffff88801617740b R10: ffffed1002c2ee81 R11: 0000000000000007 R12: ffff88800f3b63e8 R13: ffff888016a78008 R14: ffffc9000025a180 R15: 000000000000000c FS: 00007f88b622a740(0000) GS:ffff88806d540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88b5a1fa10 CR3: 000000000d848004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rxe_do_task+0x130/0x230 [rdma_rxe] rxe_rcv+0xb11/0x1df0 [rdma_rxe] rxe_loopback+0x157/0x1e0 [rdma_rxe] rxe_responder+0x5532/0x7620 [rdma_rxe] rxe_do_task+0x130/0x230 [rdma_rxe] rxe_rcv+0x9c8/0x1df0 [rdma_rxe] rxe_loopback+0x157/0x1e0 [rdma_rxe] rxe_requester+0x1efd/0x58c0 [rdma_rxe] rxe_do_task+0x130/0x230 [rdma_rxe] rxe_post_send+0x998/0x1860 [rdma_rxe] ib_uverbs_post_send+0xd5f/0x1220 [ib_uverbs] ib_uverbs_write+0x847/0xc80 [ib_uverbs] vfs_write+0x1c5/0x840 ksys_write+0x176/0x1d0 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-47075 | In the Linux kernel, the following vulnerability has been resolved: nvmet: fix memory leak in nvmet_alloc_ctrl() When creating ctrl in nvmet_alloc_ctrl(), if the cntlid_min is larger than cntlid_max of the subsystem, and jumps to the "out_free_changed_ns_list" label, but the ctrl->sqs lack of be freed. Fix this by jumping to the "out_free_sqs" label. |
| CVE-2021-47074 | In the Linux kernel, the following vulnerability has been resolved: nvme-loop: fix memory leak in nvme_loop_create_ctrl() When creating loop ctrl in nvme_loop_create_ctrl(), if nvme_init_ctrl() fails, the loop ctrl should be freed before jumping to the "out" label. |
| CVE-2021-47073 | In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems where the Dell WMI interface is supported. While exit_dell_smbios_wmi() unregisters it unconditionally, this leads to the following oops: [ 175.722921] ------------[ cut here ]------------ [ 175.722925] Unexpected driver unregister! [ 175.722939] WARNING: CPU: 1 PID: 3630 at drivers/base/driver.c:194 driver_unregister+0x38/0x40 ... [ 175.723089] Call Trace: [ 175.723094] cleanup_module+0x5/0xedd [dell_smbios] ... [ 175.723148] ---[ end trace 064c34e1ad49509d ]--- Make the unregister happen on the same condition the register happens to fix this. |
| CVE-2021-47072 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix removed dentries still existing after log is synced When we move one inode from one directory to another and both the inode and its previous parent directory were logged before, we are not supposed to have the dentry for the old parent if we have a power failure after the log is synced. Only the new dentry is supposed to exist. Generally this works correctly, however there is a scenario where this is not currently working, because the old parent of the file/directory that was moved is not authoritative for a range that includes the dir index and dir item keys of the old dentry. This case is better explained with the following example and reproducer: # The test requires a very specific layout of keys and items in the # fs/subvolume btree to trigger the bug. So we want to make sure that # on whatever platform we are, we have the same leaf/node size. # # Currently in btrfs the node/leaf size can not be smaller than the page # size (but it can be greater than the page size). So use the largest # supported node/leaf size (64K). $ mkfs.btrfs -f -n 65536 /dev/sdc $ mount /dev/sdc /mnt # "testdir" is inode 257. $ mkdir /mnt/testdir $ chmod 755 /mnt/testdir # Create several empty files to have the directory "testdir" with its # items spread over several leaves (7 in this case). $ for ((i = 1; i <= 1200; i++)); do echo -n > /mnt/testdir/file$i done # Create our test directory "dira", inode number 1458, which gets all # its items in leaf 7. # # The BTRFS_DIR_ITEM_KEY item for inode 257 ("testdir") that points to # the entry named "dira" is in leaf 2, while the BTRFS_DIR_INDEX_KEY # item that points to that entry is in leaf 3. # # For this particular filesystem node size (64K), file count and file # names, we endup with the directory entry items from inode 257 in # leaves 2 and 3, as previously mentioned - what matters for triggering # the bug exercised by this test case is that those items are not placed # in leaf 1, they must be placed in a leaf different from the one # containing the inode item for inode 257. # # The corresponding BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items for # the parent inode (257) are the following: # # item 460 key (257 DIR_ITEM 3724298081) itemoff 48344 itemsize 34 # location key (1458 INODE_ITEM 0) type DIR # transid 6 data_len 0 name_len 4 # name: dira # # and: # # item 771 key (257 DIR_INDEX 1202) itemoff 36673 itemsize 34 # location key (1458 INODE_ITEM 0) type DIR # transid 6 data_len 0 name_len 4 # name: dira $ mkdir /mnt/testdir/dira # Make sure everything done so far is durably persisted. $ sync # Now do a change to inode 257 ("testdir") that does not result in # COWing leaves 2 and 3 - the leaves that contain the directory items # pointing to inode 1458 (directory "dira"). # # Changing permissions, the owner/group, updating or adding a xattr, # etc, will not change (COW) leaves 2 and 3. So for the sake of # simplicity change the permissions of inode 257, which results in # updating its inode item and therefore change (COW) only leaf 1. $ chmod 700 /mnt/testdir # Now fsync directory inode 257. # # Since only the first leaf was changed/COWed, we log the inode item of # inode 257 and only the dentries found in the first leaf, all have a # key type of BTRFS_DIR_ITEM_KEY, and no keys of type # BTRFS_DIR_INDEX_KEY, because they sort after the former type and none # exist in the first leaf. # # We also log 3 items that represent ranges for dir items and dir # indexes for which the log is authoritative: # # 1) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is # authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset # in the range [0, 2285968570] (the offset here is th ---truncated--- |
| CVE-2021-47071 | In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Fix a memory leak in error handling paths If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be updated and 'hv_uio_cleanup()' in the error handling path will not be able to free the corresponding buffer. In such a case, we need to free the buffer explicitly. |
| CVE-2021-47070 | In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Fix another memory leak in error handling paths Memory allocated by 'vmbus_alloc_ring()' at the beginning of the probe function is never freed in the error handling path. Add the missing 'vmbus_free_ring()' call. Note that it is already freed in the .remove function. |
| CVE-2021-47069 | In the Linux kernel, the following vulnerability has been resolved: ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry do_mq_timedreceive calls wq_sleep with a stack local address. The sender (do_mq_timedsend) uses this address to later call pipelined_send. This leads to a very hard to trigger race where a do_mq_timedreceive call might return and leave do_mq_timedsend to rely on an invalid address, causing the following crash: RIP: 0010:wake_q_add_safe+0x13/0x60 Call Trace: __x64_sys_mq_timedsend+0x2a9/0x490 do_syscall_64+0x80/0x680 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5928e40343 The race occurs as: 1. do_mq_timedreceive calls wq_sleep with the address of `struct ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it holds a valid `struct ext_wait_queue *` as long as the stack has not been overwritten. 2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call __pipelined_op. 3. Sender calls __pipelined_op::smp_store_release(&this->state, STATE_READY). Here is where the race window begins. (`this` is `ewq_addr`.) 4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it will see `state == STATE_READY` and break. 5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's stack. (Although the address may not get overwritten until another function happens to touch it, which means it can persist around for an indefinite time.) 6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a `struct ext_wait_queue *`, and uses it to find a task_struct to pass to the wake_q_add_safe call. In the lucky case where nothing has overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct. In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a bogus address as the receiver's task_struct causing the crash. do_mq_timedsend::__pipelined_op() should not dereference `this` after setting STATE_READY, as the receiver counterpart is now free to return. Change __pipelined_op to call wake_q_add_safe on the receiver's task_struct returned by get_task_struct, instead of dereferencing `this` which sits on the receiver's stack. As Manfred pointed out, the race potentially also exists in ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare. Fix those in the same way. |
| CVE-2021-47068 | In the Linux kernel, the following vulnerability has been resolved: net/nfc: fix use-after-free llcp_sock_bind/connect Commits 8a4cd82d ("nfc: fix refcount leak in llcp_sock_connect()") and c33b1cc62 ("nfc: fix refcount leak in llcp_sock_bind()") fixed a refcount leak bug in bind/connect but introduced a use-after-free if the same local is assigned to 2 different sockets. This can be triggered by the following simple program: int sock1 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP ); int sock2 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP ); memset( &addr, 0, sizeof(struct sockaddr_nfc_llcp) ); addr.sa_family = AF_NFC; addr.nfc_protocol = NFC_PROTO_NFC_DEP; bind( sock1, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) ) bind( sock2, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) ) close(sock1); close(sock2); Fix this by assigning NULL to llcp_sock->local after calling nfc_llcp_local_put. This addresses CVE-2021-23134. |
| CVE-2021-47067 | In the Linux kernel, the following vulnerability has been resolved: soc/tegra: regulators: Fix locking up when voltage-spread is out of range Fix voltage coupler lockup which happens when voltage-spread is out of range due to a bug in the code. The max-spread requirement shall be accounted when CPU regulator doesn't have consumers. This problem is observed on Tegra30 Ouya game console once system-wide DVFS is enabled in a device-tree. |
| CVE-2021-47066 | In the Linux kernel, the following vulnerability has been resolved: async_xor: increase src_offs when dropping destination page Now we support sharing one page if PAGE_SIZE is not equal stripe size. To support this, it needs to support calculating xor value with different offsets for each r5dev. One offset array is used to record those offsets. In RMW mode, parity page is used as a source page. It sets ASYNC_TX_XOR_DROP_DST before calculating xor value in ops_run_prexor5. So it needs to add src_list and src_offs at the same time. Now it only needs src_list. So the xor value which is calculated is wrong. It can cause data corruption problem. I can reproduce this problem 100% on a POWER8 machine. The steps are: mdadm -CR /dev/md0 -l5 -n3 /dev/sdb1 /dev/sdc1 /dev/sdd1 --size=3G mkfs.xfs /dev/md0 mount /dev/md0 /mnt/test mount: /mnt/test: mount(2) system call failed: Structure needs cleaning. |
| CVE-2021-47065 | In the Linux kernel, the following vulnerability has been resolved: rtw88: Fix array overrun in rtw_get_tx_power_params() Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the following array overrun is logged: ================================================================================ UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34 index 5 is out of range for type 'u8 [5]' CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Workqueue: phy0 ieee80211_scan_work [mac80211] Call Trace: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] process_one_work+0x1dd/0x3a0 worker_thread+0x49/0x330 ? rescuer_thread+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ================================================================================ The statement where an array is being overrun is shown in the following snippet: if (rate <= DESC_RATE11M) tx_power = pwr_idx_2g->cck_base[group]; else ====> tx_power = pwr_idx_2g->bw40_base[group]; The associated arrays are defined in main.h as follows: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; struct rtw_2g_1s_pwr_idx_diff ht_1s_diff; struct rtw_2g_ns_pwr_idx_diff ht_2s_diff; struct rtw_2g_ns_pwr_idx_diff ht_3s_diff; struct rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; The problem arises because the value of group is 5 for channel 14. The trivial increase in the dimension of bw40_base fails as this struct must match the layout of efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set the group for channel 14 to 4 if rate <= DESC_RATE11M. This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines") |
| CVE-2021-47064 | In the Linux kernel, the following vulnerability has been resolved: mt76: fix potential DMA mapping leak With buf uninitialized in mt76_dma_tx_queue_skb_raw, its field skip_unmap could potentially inherit a non-zero value from stack garbage. If this happens, it will cause DMA mappings for MCU command frames to not be unmapped after completion |
| CVE-2021-47063 | In the Linux kernel, the following vulnerability has been resolved: drm: bridge/panel: Cleanup connector on bridge detach If we don't call drm_connector_cleanup() manually in panel_bridge_detach(), the connector will be cleaned up with the other DRM objects in the call to drm_mode_config_cleanup(). However, since our drm_connector is devm-allocated, by the time drm_mode_config_cleanup() will be called, our connector will be long gone. Therefore, the connector must be cleaned up when the bridge is detached to avoid use-after-free conditions. v2: Cleanup connector only if it was created v3: Add FIXME v4: (Use connector->dev) directly in if() block |
| CVE-2021-47062 | In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting VMSAs for SEV, which effectively switches to use online_vcpus instead of created_vcpus. This fixes a possible null-pointer dereference as created_vcpus does not guarantee a vCPU exists, since it is updated at the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the bulk of vCPU creation to run in parallel, while still correctly restricting the max number of max vCPUs. |
| CVE-2021-47061 | In the Linux kernel, the following vulnerability has been resolved: KVM: Destroy I/O bus devices on unregister failure _after_ sync'ing SRCU If allocating a new instance of an I/O bus fails when unregistering a device, wait to destroy the device until after all readers are guaranteed to see the new null bus. Destroying devices before the bus is nullified could lead to use-after-free since readers expect the devices on their reference of the bus to remain valid. |
| CVE-2021-47060 | In the Linux kernel, the following vulnerability has been resolved: KVM: Stop looking for coalesced MMIO zones if the bus is destroyed Abort the walk of coalesced MMIO zones if kvm_io_bus_unregister_dev() fails to allocate memory for the new instance of the bus. If it can't instantiate a new bus, unregister_dev() destroys all devices _except_ the target device. But, it doesn't tell the caller that it obliterated the bus and invoked the destructor for all devices that were on the bus. In the coalesced MMIO case, this can result in a deleted list entry dereference due to attempting to continue iterating on coalesced_zones after future entries (in the walk) have been deleted. Opportunistically add curly braces to the for-loop, which encompasses many lines but sneaks by without braces due to the guts being a single if statement. |
| CVE-2021-47059 | In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ss - fix result memory leak on error path This patch fixes a memory leak on an error path. |
| CVE-2021-47058 | In the Linux kernel, the following vulnerability has been resolved: regmap: set debugfs_name to NULL after it is freed There is a upstream commit cffa4b2122f5("regmap:debugfs: Fix a memory leak when calling regmap_attach_dev") that adds a if condition when create name for debugfs_name. With below function invoking logical, debugfs_name is freed in regmap_debugfs_exit(), but it is not created again because of the if condition introduced by above commit. regmap_reinit_cache() regmap_debugfs_exit() ... regmap_debugfs_init() So, set debugfs_name to NULL after it is freed. |
| CVE-2021-47057 | In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ss - Fix memory leak of object d when dma_iv fails to map In the case where the dma_iv mapping fails, the return error path leaks the memory allocated to object d. Fix this by adding a new error return label and jumping to this to ensure d is free'd before the return. Addresses-Coverity: ("Resource leak") |
| CVE-2021-47056 | In the Linux kernel, the following vulnerability has been resolved: crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init ADF_STATUS_PF_RUNNING is (only) used and checked by adf_vf2pf_shutdown() before calling adf_iov_putmsg()->mutex_lock(vf2pf_lock), however the vf2pf_lock is initialized in adf_dev_init(), which can fail and when it fail, the vf2pf_lock is either not initialized or destroyed, a subsequent use of vf2pf_lock will cause issue. To fix this issue, only set this flag if adf_dev_init() returns 0. [ 7.178404] BUG: KASAN: user-memory-access in __mutex_lock.isra.0+0x1ac/0x7c0 [ 7.180345] Call Trace: [ 7.182576] mutex_lock+0xc9/0xd0 [ 7.183257] adf_iov_putmsg+0x118/0x1a0 [intel_qat] [ 7.183541] adf_vf2pf_shutdown+0x4d/0x7b [intel_qat] [ 7.183834] adf_dev_shutdown+0x172/0x2b0 [intel_qat] [ 7.184127] adf_probe+0x5e9/0x600 [qat_dh895xccvf] |
| CVE-2021-47055 | In the Linux kernel, the following vulnerability has been resolved: mtd: require write permissions for locking and badblock ioctls MEMLOCK, MEMUNLOCK and OTPLOCK modify protection bits. Thus require write permission. Depending on the hardware MEMLOCK might even be write-once, e.g. for SPI-NOR flashes with their WP# tied to GND. OTPLOCK is always write-once. MEMSETBADBLOCK modifies the bad block table. |
| CVE-2021-47054 | In the Linux kernel, the following vulnerability has been resolved: bus: qcom: Put child node before return Put child node before return to fix potential reference count leak. Generally, the reference count of child is incremented and decremented automatically in the macro for_each_available_child_of_node() and should be decremented manually if the loop is broken in loop body. |
| CVE-2021-47053 | In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ss - Fix memory leak of pad It appears there are several failure return paths that don't seem to be free'ing pad. Fix these. Addresses-Coverity: ("Resource leak") |
| CVE-2021-47052 | In the Linux kernel, the following vulnerability has been resolved: crypto: sa2ul - Fix memory leak of rxd There are two error return paths that are not freeing rxd and causing memory leaks. Fix these. Addresses-Coverity: ("Resource leak") |
| CVE-2021-47051 | In the Linux kernel, the following vulnerability has been resolved: spi: fsl-lpspi: Fix PM reference leak in lpspi_prepare_xfer_hardware() pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. |
| CVE-2021-47050 | In the Linux kernel, the following vulnerability has been resolved: memory: renesas-rpc-if: fix possible NULL pointer dereference of resource The platform_get_resource_byname() can return NULL which would be immediately dereferenced by resource_size(). Instead dereference it after validating the resource. Addresses-Coverity: Dereference null return value |
| CVE-2021-47049 | In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Use after free in __vmbus_open() The "open_info" variable is added to the &vmbus_connection.chn_msg_list, but the error handling frees "open_info" without removing it from the list. This will result in a use after free. First remove it from the list, and then free it. |
| CVE-2021-47048 | In the Linux kernel, the following vulnerability has been resolved: spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op When handling op->addr, it is using the buffer "tmpbuf" which has been freed. This will trigger a use-after-free KASAN warning. Let's use temporary variables to store op->addr.val and op->cmd.opcode to fix this issue. |
| CVE-2021-47047 | In the Linux kernel, the following vulnerability has been resolved: spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails The spi controller supports 44-bit address space on AXI in DMA mode, so set dma_addr_t width to 44-bit to avoid using a swiotlb mapping. In addition, if dma_map_single fails, it should return immediately instead of continuing doing the DMA operation which bases on invalid address. This fixes the following crash which occurs in reading a big block from flash: [ 123.633577] zynqmp-qspi ff0f0000.spi: swiotlb buffer is full (sz: 4194304 bytes), total 32768 (slots), used 0 (slots) [ 123.644230] zynqmp-qspi ff0f0000.spi: ERR:rxdma:memory not mapped [ 123.784625] Unable to handle kernel paging request at virtual address 00000000003fffc0 [ 123.792536] Mem abort info: [ 123.795313] ESR = 0x96000145 [ 123.798351] EC = 0x25: DABT (current EL), IL = 32 bits [ 123.803655] SET = 0, FnV = 0 [ 123.806693] EA = 0, S1PTW = 0 [ 123.809818] Data abort info: [ 123.812683] ISV = 0, ISS = 0x00000145 [ 123.816503] CM = 1, WnR = 1 [ 123.819455] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000805047000 [ 123.825887] [00000000003fffc0] pgd=0000000803b45003, p4d=0000000803b45003, pud=0000000000000000 [ 123.834586] Internal error: Oops: 96000145 [#1] PREEMPT SMP |
| CVE-2021-47046 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix off by one in hdmi_14_process_transaction() The hdcp_i2c_offsets[] array did not have an entry for HDCP_MESSAGE_ID_WRITE_CONTENT_STREAM_TYPE so it led to an off by one read overflow. I added an entry and copied the 0x0 value for the offset from similar code in drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c. I also declared several of these arrays as having HDCP_MESSAGE_ID_MAX entries. This doesn't change the code, but it's just a belt and suspenders approach to try future proof the code. |
| CVE-2021-47045 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix null pointer dereference in lpfc_prep_els_iocb() It is possible to call lpfc_issue_els_plogi() passing a did for which no matching ndlp is found. A call is then made to lpfc_prep_els_iocb() with a null pointer to a lpfc_nodelist structure resulting in a null pointer dereference. Fix by returning an error status if no valid ndlp is found. Fix up comments regarding ndlp reference counting. |
| CVE-2021-47044 | In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix shift-out-of-bounds in load_balance() Syzbot reported a handful of occurrences where an sd->nr_balance_failed can grow to much higher values than one would expect. A successful load_balance() resets it to 0; a failed one increments it. Once it gets to sd->cache_nice_tries + 3, this *should* trigger an active balance, which will either set it to sd->cache_nice_tries+1 or reset it to 0. However, in case the to-be-active-balanced task is not allowed to run on env->dst_cpu, then the increment is done without any further modification. This could then be repeated ad nauseam, and would explain the absurdly high values reported by syzbot (86, 149). VincentG noted there is value in letting sd->cache_nice_tries grow, so the shift itself should be fixed. That means preventing: """ If the value of the right operand is negative or is greater than or equal to the width of the promoted left operand, the behavior is undefined. """ Thus we need to cap the shift exponent to BITS_PER_TYPE(typeof(lefthand)) - 1. I had a look around for other similar cases via coccinelle: @expr@ position pos; expression E1; expression E2; @@ ( E1 >> E2@pos | E1 >> E2@pos ) @cst depends on expr@ position pos; expression expr.E1; constant cst; @@ ( E1 >> cst@pos | E1 << cst@pos ) @script:python depends on !cst@ pos << expr.pos; exp << expr.E2; @@ # Dirty hack to ignore constexpr if exp.upper() != exp: coccilib.report.print_report(pos[0], "Possible UB shift here") The only other match in kernel/sched is rq_clock_thermal() which employs sched_thermal_decay_shift, and that exponent is already capped to 10, so that one is fine. |
| CVE-2021-47043 | In the Linux kernel, the following vulnerability has been resolved: media: venus: core: Fix some resource leaks in the error path of 'venus_probe()' If an error occurs after a successful 'of_icc_get()' call, it must be undone. Use 'devm_of_icc_get()' instead of 'of_icc_get()' to avoid the leak. Update the remove function accordingly and axe the now unneeded 'icc_put()' calls. |
| CVE-2021-47042 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Free local data after use Fixes the following memory leak in dc_link_construct(): unreferenced object 0xffffa03e81471400 (size 1024): comm "amd_module_load", pid 2486, jiffies 4294946026 (age 10.544s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000000bdf5c4a>] kmem_cache_alloc_trace+0x30a/0x4a0 [<00000000e7c59f0e>] link_create+0xce/0xac0 [amdgpu] [<000000002fb6c072>] dc_create+0x370/0x720 [amdgpu] [<000000000094d1f3>] amdgpu_dm_init+0x18e/0x17a0 [amdgpu] [<00000000bec048fd>] dm_hw_init+0x12/0x20 [amdgpu] [<00000000a2bb7cf6>] amdgpu_device_init+0x1463/0x1e60 [amdgpu] [<0000000032d3bb13>] amdgpu_driver_load_kms+0x5b/0x330 [amdgpu] [<00000000a27834f9>] amdgpu_pci_probe+0x192/0x280 [amdgpu] [<00000000fec7d291>] local_pci_probe+0x47/0xa0 [<0000000055dbbfa7>] pci_device_probe+0xe3/0x180 [<00000000815da970>] really_probe+0x1c4/0x4e0 [<00000000b4b6974b>] driver_probe_device+0x62/0x150 [<000000000f9ecc61>] device_driver_attach+0x58/0x60 [<000000000f65c843>] __driver_attach+0xd6/0x150 [<000000002f5e3683>] bus_for_each_dev+0x6a/0xc0 [<00000000a1cfc897>] driver_attach+0x1e/0x20 |
| CVE-2021-47041 | In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix incorrect locking in state_change sk callback We are not changing anything in the TCP connection state so we should not take a write_lock but rather a read lock. This caused a deadlock when running nvmet-tcp and nvme-tcp on the same system, where state_change callbacks on the host and on the controller side have causal relationship and made lockdep report on this with blktests: ================================ WARNING: inconsistent lock state 5.12.0-rc3 #1 Tainted: G I -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-R} usage. nvme/1324 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888363151000 (clock-AF_INET){++-?}-{2:2}, at: nvme_tcp_state_change+0x21/0x150 [nvme_tcp] {IN-SOFTIRQ-W} state was registered at: __lock_acquire+0x79b/0x18d0 lock_acquire+0x1ca/0x480 _raw_write_lock_bh+0x39/0x80 nvmet_tcp_state_change+0x21/0x170 [nvmet_tcp] tcp_fin+0x2a8/0x780 tcp_data_queue+0xf94/0x1f20 tcp_rcv_established+0x6ba/0x1f00 tcp_v4_do_rcv+0x502/0x760 tcp_v4_rcv+0x257e/0x3430 ip_protocol_deliver_rcu+0x69/0x6a0 ip_local_deliver_finish+0x1e2/0x2f0 ip_local_deliver+0x1a2/0x420 ip_rcv+0x4fb/0x6b0 __netif_receive_skb_one_core+0x162/0x1b0 process_backlog+0x1ff/0x770 __napi_poll.constprop.0+0xa9/0x5c0 net_rx_action+0x7b3/0xb30 __do_softirq+0x1f0/0x940 do_softirq+0xa1/0xd0 __local_bh_enable_ip+0xd8/0x100 ip_finish_output2+0x6b7/0x18a0 __ip_queue_xmit+0x706/0x1aa0 __tcp_transmit_skb+0x2068/0x2e20 tcp_write_xmit+0xc9e/0x2bb0 __tcp_push_pending_frames+0x92/0x310 inet_shutdown+0x158/0x300 __nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp] nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp] nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp] nvme_do_delete_ctrl+0x100/0x10c [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write_iter+0x2c7/0x460 new_sync_write+0x36c/0x610 vfs_write+0x5c0/0x870 ksys_write+0xf9/0x1d0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae irq event stamp: 10687 hardirqs last enabled at (10687): [<ffffffff9ec376bd>] _raw_spin_unlock_irqrestore+0x2d/0x40 hardirqs last disabled at (10686): [<ffffffff9ec374d8>] _raw_spin_lock_irqsave+0x68/0x90 softirqs last enabled at (10684): [<ffffffff9f000608>] __do_softirq+0x608/0x940 softirqs last disabled at (10649): [<ffffffff9cdedd31>] do_softirq+0xa1/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(clock-AF_INET); <Interrupt> lock(clock-AF_INET); *** DEADLOCK *** 5 locks held by nvme/1324: #0: ffff8884a01fe470 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0xf9/0x1d0 #1: ffff8886e435c090 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x216/0x460 #2: ffff888104d90c38 (kn->active#255){++++}-{0:0}, at: kernfs_remove_self+0x22d/0x330 #3: ffff8884634538d0 (&queue->queue_lock){+.+.}-{3:3}, at: nvme_tcp_stop_queue+0x52/0xb0 [nvme_tcp] #4: ffff888363150d30 (sk_lock-AF_INET){+.+.}-{0:0}, at: inet_shutdown+0x59/0x300 stack backtrace: CPU: 26 PID: 1324 Comm: nvme Tainted: G I 5.12.0-rc3 #1 Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.10.0 11/12/2020 Call Trace: dump_stack+0x93/0xc2 mark_lock_irq.cold+0x2c/0xb3 ? verify_lock_unused+0x390/0x390 ? stack_trace_consume_entry+0x160/0x160 ? lock_downgrade+0x100/0x100 ? save_trace+0x88/0x5e0 ? _raw_spin_unlock_irqrestore+0x2d/0x40 mark_lock+0x530/0x1470 ? mark_lock_irq+0x1d10/0x1d10 ? enqueue_timer+0x660/0x660 mark_usage+0x215/0x2a0 __lock_acquire+0x79b/0x18d0 ? tcp_schedule_loss_probe.part.0+0x38c/0x520 lock_acquire+0x1ca/0x480 ? nvme_tcp_state_change+0x21/0x150 [nvme_tcp] ? rcu_read_unlock+0x40/0x40 ? tcp_mtu_probe+0x1ae0/0x1ae0 ? kmalloc_reserve+0xa0/0xa0 ? sysfs_file_ops+0x170/0x170 _raw_read_lock+0x3d/0xa0 ? nvme_tcp_state_change+0x21/0x150 [nvme_tcp] nvme_tcp_state_change+0x21/0x150 [nvme_tcp] ? sysfs_file_ops ---truncated--- |
| CVE-2021-47040 | In the Linux kernel, the following vulnerability has been resolved: io_uring: fix overflows checks in provide buffers Colin reported before possible overflow and sign extension problems in io_provide_buffers_prep(). As Linus pointed out previous attempt did nothing useful, see d81269fecb8ce ("io_uring: fix provide_buffers sign extension"). Do that with help of check_<op>_overflow helpers. And fix struct io_provide_buf::len type, as it doesn't make much sense to keep it signed. |
| CVE-2021-47039 | In the Linux kernel, the following vulnerability has been resolved: ataflop: potential out of bounds in do_format() The function uses "type" as an array index: q = unit[drive].disk[type]->queue; Unfortunately the bounds check on "type" isn't done until later in the function. Fix this by moving the bounds check to the start. |
| CVE-2021-47038 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: avoid deadlock between hci_dev->lock and socket lock Commit eab2404ba798 ("Bluetooth: Add BT_PHY socket option") added a dependency between socket lock and hci_dev->lock that could lead to deadlock. It turns out that hci_conn_get_phy() is not in any way relying on hdev being immutable during the runtime of this function, neither does it even look at any of the members of hdev, and as such there is no need to hold that lock. This fixes the lockdep splat below: ====================================================== WARNING: possible circular locking dependency detected 5.12.0-rc1-00026-g73d464503354 #10 Not tainted ------------------------------------------------------ bluetoothd/1118 is trying to acquire lock: ffff8f078383c078 (&hdev->lock){+.+.}-{3:3}, at: hci_conn_get_phy+0x1c/0x150 [bluetooth] but task is already holding lock: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}: lock_sock_nested+0x72/0xa0 l2cap_sock_ready_cb+0x18/0x70 [bluetooth] l2cap_config_rsp+0x27a/0x520 [bluetooth] l2cap_sig_channel+0x658/0x1330 [bluetooth] l2cap_recv_frame+0x1ba/0x310 [bluetooth] hci_rx_work+0x1cc/0x640 [bluetooth] process_one_work+0x244/0x5f0 worker_thread+0x3c/0x380 kthread+0x13e/0x160 ret_from_fork+0x22/0x30 -> #2 (&chan->lock#2/1){+.+.}-{3:3}: __mutex_lock+0xa3/0xa10 l2cap_chan_connect+0x33a/0x940 [bluetooth] l2cap_sock_connect+0x141/0x2a0 [bluetooth] __sys_connect+0x9b/0xc0 __x64_sys_connect+0x16/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&conn->chan_lock){+.+.}-{3:3}: __mutex_lock+0xa3/0xa10 l2cap_chan_connect+0x322/0x940 [bluetooth] l2cap_sock_connect+0x141/0x2a0 [bluetooth] __sys_connect+0x9b/0xc0 __x64_sys_connect+0x16/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&hdev->lock){+.+.}-{3:3}: __lock_acquire+0x147a/0x1a50 lock_acquire+0x277/0x3d0 __mutex_lock+0xa3/0xa10 hci_conn_get_phy+0x1c/0x150 [bluetooth] l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth] __sys_getsockopt+0xcc/0x200 __x64_sys_getsockopt+0x20/0x30 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &hdev->lock --> &chan->lock#2/1 --> sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock(&chan->lock#2/1); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock(&hdev->lock); *** DEADLOCK *** 1 lock held by bluetoothd/1118: #0: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 [bluetooth] stack backtrace: CPU: 3 PID: 1118 Comm: bluetoothd Not tainted 5.12.0-rc1-00026-g73d464503354 #10 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017 Call Trace: dump_stack+0x7f/0xa1 check_noncircular+0x105/0x120 ? __lock_acquire+0x147a/0x1a50 __lock_acquire+0x147a/0x1a50 lock_acquire+0x277/0x3d0 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] ? __lock_acquire+0x2e1/0x1a50 ? lock_is_held_type+0xb4/0x120 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] __mutex_lock+0xa3/0xa10 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] ? lock_acquire+0x277/0x3d0 ? mark_held_locks+0x49/0x70 ? mark_held_locks+0x49/0x70 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] hci_conn_get_phy+0x ---truncated--- |
| CVE-2021-47037 | In the Linux kernel, the following vulnerability has been resolved: ASoC: q6afe-clocks: fix reprobing of the driver Q6afe-clocks driver can get reprobed. For example if the APR services are restarted after the firmware crash. However currently Q6afe-clocks driver will oops because hw.init will get cleared during first _probe call. Rewrite the driver to fill the clock data at runtime rather than using big static array of clocks. |
| CVE-2021-47036 | In the Linux kernel, the following vulnerability has been resolved: udp: skip L4 aggregation for UDP tunnel packets If NETIF_F_GRO_FRAGLIST or NETIF_F_GRO_UDP_FWD are enabled, and there are UDP tunnels available in the system, udp_gro_receive() could end-up doing L4 aggregation (either SKB_GSO_UDP_L4 or SKB_GSO_FRAGLIST) at the outer UDP tunnel level for packets effectively carrying and UDP tunnel header. That could cause inner protocol corruption. If e.g. the relevant packets carry a vxlan header, different vxlan ids will be ignored/ aggregated to the same GSO packet. Inner headers will be ignored, too, so that e.g. TCP over vxlan push packets will be held in the GRO engine till the next flush, etc. Just skip the SKB_GSO_UDP_L4 and SKB_GSO_FRAGLIST code path if the current packet could land in a UDP tunnel, and let udp_gro_receive() do GRO via udp_sk(sk)->gro_receive. The check implemented in this patch is broader than what is strictly needed, as the existing UDP tunnel could be e.g. configured on top of a different device: we could end-up skipping GRO at-all for some packets. Anyhow, that is a very thin corner case and covering it will add quite a bit of complexity. v1 -> v2: - hopefully clarify the commit message |
| CVE-2021-47035 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Remove WO permissions on second-level paging entries When the first level page table is used for IOVA translation, it only supports Read-Only and Read-Write permissions. The Write-Only permission is not supported as the PRESENT bit (implying Read permission) should always set. When using second level, we still give separate permissions that allows WriteOnly which seems inconsistent and awkward. We want to have consistent behavior. After moving to 1st level, we don't want things to work sometimes, and break if we use 2nd level for the same mappings. Hence remove this configuration. |
| CVE-2021-47034 | In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix pte update for kernel memory on radix When adding a PTE a ptesync is needed to order the update of the PTE with subsequent accesses otherwise a spurious fault may be raised. radix__set_pte_at() does not do this for performance gains. For non-kernel memory this is not an issue as any faults of this kind are corrected by the page fault handler. For kernel memory these faults are not handled. The current solution is that there is a ptesync in flush_cache_vmap() which should be called when mapping from the vmalloc region. However, map_kernel_page() does not call flush_cache_vmap(). This is troublesome in particular for code patching with Strict RWX on radix. In do_patch_instruction() the page frame that contains the instruction to be patched is mapped and then immediately patched. With no ordering or synchronization between setting up the PTE and writing to the page it is possible for faults. As the code patching is done using __put_user_asm_goto() the resulting fault is obscured - but using a normal store instead it can be seen: BUG: Unable to handle kernel data access on write at 0xc008000008f24a3c Faulting instruction address: 0xc00000000008bd74 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: nop_module(PO+) [last unloaded: nop_module] CPU: 4 PID: 757 Comm: sh Tainted: P O 5.10.0-rc5-01361-ge3c1b78c8440-dirty #43 NIP: c00000000008bd74 LR: c00000000008bd50 CTR: c000000000025810 REGS: c000000016f634a0 TRAP: 0300 Tainted: P O (5.10.0-rc5-01361-ge3c1b78c8440-dirty) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44002884 XER: 00000000 CFAR: c00000000007c68c DAR: c008000008f24a3c DSISR: 42000000 IRQMASK: 1 This results in the kind of issue reported here: https://lore.kernel.org/linuxppc-dev/[email protected]/ Chris Riedl suggested a reliable way to reproduce the issue: $ mount -t debugfs none /sys/kernel/debug $ (while true; do echo function > /sys/kernel/debug/tracing/current_tracer ; echo nop > /sys/kernel/debug/tracing/current_tracer ; done) & Turning ftrace on and off does a large amount of code patching which in usually less then 5min will crash giving a trace like: ftrace-powerpc: (____ptrval____): replaced (4b473b11) != old (60000000) ------------[ ftrace bug ]------------ ftrace failed to modify [<c000000000bf8e5c>] napi_busy_loop+0xc/0x390 actual: 11:3b:47:4b Setting ftrace call site to call ftrace function ftrace record flags: 80000001 (1) expected tramp: c00000000006c96c ------------[ cut here ]------------ WARNING: CPU: 4 PID: 809 at kernel/trace/ftrace.c:2065 ftrace_bug+0x28c/0x2e8 Modules linked in: nop_module(PO-) [last unloaded: nop_module] CPU: 4 PID: 809 Comm: sh Tainted: P O 5.10.0-rc5-01360-gf878ccaf250a #1 NIP: c00000000024f334 LR: c00000000024f330 CTR: c0000000001a5af0 REGS: c000000004c8b760 TRAP: 0700 Tainted: P O (5.10.0-rc5-01360-gf878ccaf250a) MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28008848 XER: 20040000 CFAR: c0000000001a9c98 IRQMASK: 0 GPR00: c00000000024f330 c000000004c8b9f0 c000000002770600 0000000000000022 GPR04: 00000000ffff7fff c000000004c8b6d0 0000000000000027 c0000007fe9bcdd8 GPR08: 0000000000000023 ffffffffffffffd8 0000000000000027 c000000002613118 GPR12: 0000000000008000 c0000007fffdca00 0000000000000000 0000000000000000 GPR16: 0000000023ec37c5 0000000000000000 0000000000000000 0000000000000008 GPR20: c000000004c8bc90 c0000000027a2d20 c000000004c8bcd0 c000000002612fe8 GPR24: 0000000000000038 0000000000000030 0000000000000028 0000000000000020 GPR28: c000000000ff1b68 c000000000bf8e5c c00000000312f700 c000000000fbb9b0 NIP ftrace_bug+0x28c/0x2e8 LR ftrace_bug+0x288/0x2e8 Call T ---truncated--- |
| CVE-2021-47033 | In the Linux kernel, the following vulnerability has been resolved: mt76: mt7615: fix tx skb dma unmap The first pointer in the txp needs to be unmapped as well, otherwise it will leak DMA mapping entries |
| CVE-2021-47032 | In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix tx skb dma unmap The first pointer in the txp needs to be unmapped as well, otherwise it will leak DMA mapping entries |
| CVE-2021-47031 | In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix memory leak in mt7921_coredump_work Fix possible memory leak in mt7921_coredump_work. |
| CVE-2021-47030 | In the Linux kernel, the following vulnerability has been resolved: mt76: mt7615: fix memory leak in mt7615_coredump_work Similar to the issue fixed in mt7921_coredump_work, fix a possible memory leak in mt7615_coredump_work routine. |
| CVE-2021-47029 | In the Linux kernel, the following vulnerability has been resolved: mt76: connac: fix kernel warning adding monitor interface Fix the following kernel warning adding a monitor interface in mt76_connac_mcu_uni_add_dev routine. [ 507.984882] ------------[ cut here ]------------ [ 507.989515] WARNING: CPU: 1 PID: 3017 at mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.059379] CPU: 1 PID: 3017 Comm: ifconfig Not tainted 5.4.98 #0 [ 508.065461] Hardware name: MT7622_MT7531 RFB (DT) [ 508.070156] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 508.074939] pc : mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.081806] lr : mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e] [ 508.087367] sp : ffffffc013a33930 [ 508.090671] x29: ffffffc013a33930 x28: ffffff801e628ac0 [ 508.095973] x27: ffffff801c7f1200 x26: ffffff801c7eb008 [ 508.101275] x25: ffffff801c7eaef0 x24: ffffff801d025610 [ 508.106577] x23: ffffff801d022990 x22: ffffff801d024de8 [ 508.111879] x21: ffffff801d0226a0 x20: ffffff801c7eaee8 [ 508.117181] x19: ffffff801d0226a0 x18: 000000005d00b000 [ 508.122482] x17: 00000000ffffffff x16: 0000000000000000 [ 508.127785] x15: 0000000000000080 x14: ffffff801d704000 [ 508.133087] x13: 0000000000000040 x12: 0000000000000002 [ 508.138389] x11: 000000000000000c x10: 0000000000000000 [ 508.143691] x9 : 0000000000000020 x8 : 0000000000000001 [ 508.148992] x7 : 0000000000000000 x6 : 0000000000000000 [ 508.154294] x5 : ffffff801c7eaee8 x4 : 0000000000000006 [ 508.159596] x3 : 0000000000000001 x2 : 0000000000000000 [ 508.164898] x1 : ffffff801c7eac08 x0 : ffffff801d0226a0 [ 508.170200] Call trace: [ 508.172640] mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.179159] mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e] [ 508.184394] drv_add_interface+0x34/0x88 [mac80211] [ 508.189271] ieee80211_add_virtual_monitor+0xe0/0xb48 [mac80211] [ 508.195277] ieee80211_do_open+0x86c/0x918 [mac80211] [ 508.200328] ieee80211_do_open+0x900/0x918 [mac80211] [ 508.205372] __dev_open+0xcc/0x150 [ 508.208763] __dev_change_flags+0x134/0x198 [ 508.212937] dev_change_flags+0x20/0x60 [ 508.216764] devinet_ioctl+0x3e8/0x748 [ 508.220503] inet_ioctl+0x1e4/0x350 [ 508.223983] sock_do_ioctl+0x48/0x2a0 [ 508.227635] sock_ioctl+0x310/0x4f8 [ 508.231116] do_vfs_ioctl+0xa4/0xac0 [ 508.234681] ksys_ioctl+0x44/0x90 [ 508.237985] __arm64_sys_ioctl+0x1c/0x48 [ 508.241901] el0_svc_common.constprop.1+0x7c/0x100 [ 508.246681] el0_svc_handler+0x18/0x20 [ 508.250421] el0_svc+0x8/0x1c8 [ 508.253465] ---[ end trace c7b90fee13d72c39 ]--- [ 508.261278] ------------[ cut here ]------------ |
| CVE-2021-47028 | In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix txrate reporting Properly check rate_info to fix unexpected reporting. [ 1215.161863] Call trace: [ 1215.164307] cfg80211_calculate_bitrate+0x124/0x200 [cfg80211] [ 1215.170139] ieee80211s_update_metric+0x80/0xc0 [mac80211] [ 1215.175624] ieee80211_tx_status_ext+0x508/0x838 [mac80211] [ 1215.181190] mt7915_mcu_get_rx_rate+0x28c/0x8d0 [mt7915e] [ 1215.186580] mt7915_mac_tx_free+0x324/0x7c0 [mt7915e] [ 1215.191623] mt7915_queue_rx_skb+0xa8/0xd0 [mt7915e] [ 1215.196582] mt76_dma_cleanup+0x7b0/0x11d0 [mt76] [ 1215.201276] __napi_poll+0x38/0xf8 [ 1215.204668] napi_workfn+0x40/0x80 [ 1215.208062] process_one_work+0x1fc/0x390 [ 1215.212062] worker_thread+0x48/0x4d0 [ 1215.215715] kthread+0x120/0x128 [ 1215.218935] ret_from_fork+0x10/0x1c |
| CVE-2021-47027 | In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix kernel crash when the firmware fails to download Fix kernel crash when the firmware is missing or fails to download. [ 9.444758] kernel BUG at drivers/pci/msi.c:375! [ 9.449363] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 9.501033] pstate: a0400009 (NzCv daif +PAN -UAO) [ 9.505814] pc : free_msi_irqs+0x180/0x184 [ 9.509897] lr : free_msi_irqs+0x40/0x184 [ 9.513893] sp : ffffffc015193870 [ 9.517194] x29: ffffffc015193870 x28: 00000000f0e94fa2 [ 9.522492] x27: 0000000000000acd x26: 000000000000009a [ 9.527790] x25: ffffffc0152cee58 x24: ffffffdbb383e0d8 [ 9.533087] x23: ffffffdbb38628d0 x22: 0000000000040200 [ 9.538384] x21: ffffff8cf7de7318 x20: ffffff8cd65a2480 [ 9.543681] x19: ffffff8cf7de7000 x18: 0000000000000000 [ 9.548979] x17: ffffff8cf9ca03b4 x16: ffffffdc13ad9a34 [ 9.554277] x15: 0000000000000000 x14: 0000000000080800 [ 9.559575] x13: ffffff8cd65a2980 x12: 0000000000000000 [ 9.564873] x11: ffffff8cfa45d820 x10: ffffff8cfa45d6d0 [ 9.570171] x9 : 0000000000000040 x8 : ffffff8ccef1b780 [ 9.575469] x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000000 [ 9.580766] x5 : ffffffdc13824900 x4 : ffffff8ccefe0000 [ 9.586063] x3 : 0000000000000000 x2 : 0000000000000000 [ 9.591362] x1 : 0000000000000125 x0 : ffffff8ccefe0000 [ 9.596660] Call trace: [ 9.599095] free_msi_irqs+0x180/0x184 [ 9.602831] pci_disable_msi+0x100/0x130 [ 9.606740] pci_free_irq_vectors+0x24/0x30 [ 9.610915] mt7921_pci_probe+0xbc/0x250 [mt7921e] [ 9.615693] pci_device_probe+0xd4/0x14c [ 9.619604] really_probe+0x134/0x2ec [ 9.623252] driver_probe_device+0x64/0xfc [ 9.627335] device_driver_attach+0x4c/0x6c [ 9.631506] __driver_attach+0xac/0xc0 [ 9.635243] bus_for_each_dev+0x8c/0xd4 [ 9.639066] driver_attach+0x2c/0x38 [ 9.642628] bus_add_driver+0xfc/0x1d0 [ 9.646365] driver_register+0x64/0xf8 [ 9.650101] __pci_register_driver+0x6c/0x7c [ 9.654360] init_module+0x28/0xfdc [mt7921e] [ 9.658704] do_one_initcall+0x13c/0x2d0 [ 9.662615] do_init_module+0x58/0x1e8 [ 9.666351] load_module+0xd80/0xeb4 [ 9.669912] __arm64_sys_finit_module+0xa8/0xe0 [ 9.674430] el0_svc_common+0xa4/0x16c [ 9.678168] el0_svc_compat_handler+0x2c/0x40 [ 9.682511] el0_svc_compat+0x8/0x10 [ 9.686076] Code: a94257f6 f9400bf7 a8c47bfd d65f03c0 (d4210000) [ 9.692155] ---[ end trace 7621f966afbf0a29 ]--- [ 9.697385] Kernel panic - not syncing: Fatal exception [ 9.702599] SMP: stopping secondary CPUs [ 9.706549] Kernel Offset: 0x1c03600000 from 0xffffffc010000000 [ 9.712456] PHYS_OFFSET: 0xfffffff440000000 [ 9.716625] CPU features: 0x080026,2a80aa18 [ 9.720795] Memory Limit: none |
| CVE-2021-47026 | In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-clt: destroy sysfs after removing session from active list A session can be removed dynamically by sysfs interface "remove_path" that eventually calls rtrs_clt_remove_path_from_sysfs function. The current rtrs_clt_remove_path_from_sysfs first removes the sysfs interfaces and frees sess->stats object. Second it removes the session from the active list. Therefore some functions could access non-connected session and access the freed sess->stats object even-if they check the session status before accessing the session. For instance rtrs_clt_request and get_next_path_min_inflight check the session status and try to send IO to the session. The session status could be changed when they are trying to send IO but they could not catch the change and update the statistics information in sess->stats object, and generate use-after-free problem. (see: "RDMA/rtrs-clt: Check state of the rtrs_clt_sess before reading its stats") This patch changes the rtrs_clt_remove_path_from_sysfs to remove the session from the active session list and then destroy the sysfs interfaces. Each function still should check the session status because closing or error recovery paths can change the status. |
| CVE-2021-47025 | In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Always enable the clk on resume In mtk_iommu_runtime_resume always enable the clk, even if m4u_dom is null. Otherwise the 'suspend' cb might disable the clk which is already disabled causing the warning: [ 1.586104] infra_m4u already disabled [ 1.586133] WARNING: CPU: 0 PID: 121 at drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 1.594391] mtk-iommu 10205000.iommu: bound 18001000.larb (ops mtk_smi_larb_component_ops) [ 1.598108] Modules linked in: [ 1.598114] CPU: 0 PID: 121 Comm: kworker/0:2 Not tainted 5.12.0-rc5 #69 [ 1.609246] mtk-iommu 10205000.iommu: bound 14027000.larb (ops mtk_smi_larb_component_ops) [ 1.617487] Hardware name: Google Elm (DT) [ 1.617491] Workqueue: pm pm_runtime_work [ 1.620545] mtk-iommu 10205000.iommu: bound 19001000.larb (ops mtk_smi_larb_component_ops) [ 1.627229] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 1.659297] pc : clk_core_disable+0xb0/0xb8 [ 1.663475] lr : clk_core_disable+0xb0/0xb8 [ 1.667652] sp : ffff800011b9bbe0 [ 1.670959] x29: ffff800011b9bbe0 x28: 0000000000000000 [ 1.676267] x27: ffff800011448000 x26: ffff8000100cfd98 [ 1.681574] x25: ffff800011b9bd48 x24: 0000000000000000 [ 1.686882] x23: 0000000000000000 x22: ffff8000106fad90 [ 1.692189] x21: 000000000000000a x20: ffff0000c0048500 [ 1.697496] x19: ffff0000c0048500 x18: ffffffffffffffff [ 1.702804] x17: 0000000000000000 x16: 0000000000000000 [ 1.708112] x15: ffff800011460300 x14: fffffffffffe0000 [ 1.713420] x13: ffff8000114602d8 x12: 0720072007200720 [ 1.718727] x11: 0720072007200720 x10: 0720072007200720 [ 1.724035] x9 : ffff800011b9bbe0 x8 : ffff800011b9bbe0 [ 1.729342] x7 : 0000000000000009 x6 : ffff8000114b8328 [ 1.734649] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.739956] x3 : 00000000ffffffff x2 : ffff800011460298 [ 1.745263] x1 : 1af1d7de276f4500 x0 : 0000000000000000 [ 1.750572] Call trace: [ 1.753010] clk_core_disable+0xb0/0xb8 [ 1.756840] clk_core_disable_lock+0x24/0x40 [ 1.761105] clk_disable+0x20/0x30 [ 1.764501] mtk_iommu_runtime_suspend+0x88/0xa8 [ 1.769114] pm_generic_runtime_suspend+0x2c/0x48 [ 1.773815] __rpm_callback+0xe0/0x178 [ 1.777559] rpm_callback+0x24/0x88 [ 1.781041] rpm_suspend+0xdc/0x470 [ 1.784523] rpm_idle+0x12c/0x170 [ 1.787831] pm_runtime_work+0xa8/0xc0 [ 1.791573] process_one_work+0x1e8/0x360 [ 1.795580] worker_thread+0x44/0x478 [ 1.799237] kthread+0x150/0x158 [ 1.802460] ret_from_fork+0x10/0x30 [ 1.806034] ---[ end trace 82402920ef64573b ]--- [ 1.810728] ------------[ cut here ]------------ In addition, we now don't need to enable the clock from the function mtk_iommu_hw_init since it is already enabled by the resume. |
| CVE-2021-47024 | In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: free queued packets when closing socket As reported by syzbot [1], there is a memory leak while closing the socket. We partially solved this issue with commit ac03046ece2b ("vsock/virtio: free packets during the socket release"), but we forgot to drain the RX queue when the socket is definitely closed by the scheduled work. To avoid future issues, let's use the new virtio_transport_remove_sock() to drain the RX queue before removing the socket from the af_vsock lists calling vsock_remove_sock(). [1] https://syzkaller.appspot.com/bug?extid=24452624fc4c571eedd9 |
| CVE-2021-47023 | In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix port event handling on init For some reason there might be a crash during ports creation if port events are handling at the same time because fw may send initial port event with down state. The crash points to cancel_delayed_work() which is called when port went is down. Currently I did not find out the real cause of the issue, so fixed it by cancel port stats work only if previous port's state was up & runnig. The following is the crash which can be triggered: [ 28.311104] Unable to handle kernel paging request at virtual address 000071775f776600 [ 28.319097] Mem abort info: [ 28.321914] ESR = 0x96000004 [ 28.324996] EC = 0x25: DABT (current EL), IL = 32 bits [ 28.330350] SET = 0, FnV = 0 [ 28.333430] EA = 0, S1PTW = 0 [ 28.336597] Data abort info: [ 28.339499] ISV = 0, ISS = 0x00000004 [ 28.343362] CM = 0, WnR = 0 [ 28.346354] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000100bf7000 [ 28.352842] [000071775f776600] pgd=0000000000000000, p4d=0000000000000000 [ 28.359695] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 28.365310] Modules linked in: prestera_pci(+) prestera uio_pdrv_genirq [ 28.372005] CPU: 0 PID: 1291 Comm: kworker/0:1H Not tainted 5.11.0-rc4 #1 [ 28.378846] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 28.384283] Workqueue: prestera_fw_wq prestera_fw_evt_work_fn [prestera_pci] [ 28.391413] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 28.397468] pc : get_work_pool+0x48/0x60 [ 28.401442] lr : try_to_grab_pending+0x6c/0x1b0 [ 28.406018] sp : ffff80001391bc60 [ 28.409358] x29: ffff80001391bc60 x28: 0000000000000000 [ 28.414725] x27: ffff000104fc8b40 x26: ffff80001127de88 [ 28.420089] x25: 0000000000000000 x24: ffff000106119760 [ 28.425452] x23: ffff00010775dd60 x22: ffff00010567e000 [ 28.430814] x21: 0000000000000000 x20: ffff80001391bcb0 [ 28.436175] x19: ffff00010775deb8 x18: 00000000000000c0 [ 28.441537] x17: 0000000000000000 x16: 000000008d9b0e88 [ 28.446898] x15: 0000000000000001 x14: 00000000000002ba [ 28.452261] x13: 80a3002c00000002 x12: 00000000000005f4 [ 28.457622] x11: 0000000000000030 x10: 000000000000000c [ 28.462985] x9 : 000000000000000c x8 : 0000000000000030 [ 28.468346] x7 : ffff800014400000 x6 : ffff000106119758 [ 28.473708] x5 : 0000000000000003 x4 : ffff00010775dc60 [ 28.479068] x3 : 0000000000000000 x2 : 0000000000000060 [ 28.484429] x1 : 000071775f776600 x0 : ffff00010775deb8 [ 28.489791] Call trace: [ 28.492259] get_work_pool+0x48/0x60 [ 28.495874] cancel_delayed_work+0x38/0xb0 [ 28.500011] prestera_port_handle_event+0x90/0xa0 [prestera] [ 28.505743] prestera_evt_recv+0x98/0xe0 [prestera] [ 28.510683] prestera_fw_evt_work_fn+0x180/0x228 [prestera_pci] [ 28.516660] process_one_work+0x1e8/0x360 [ 28.520710] worker_thread+0x44/0x480 [ 28.524412] kthread+0x154/0x160 [ 28.527670] ret_from_fork+0x10/0x38 [ 28.531290] Code: a8c17bfd d50323bf d65f03c0 9278dc21 (f9400020) [ 28.537429] ---[ end trace 5eced933df3a080b ]--- |
| CVE-2021-47022 | In the Linux kernel, the following vulnerability has been resolved: mt76: mt7615: fix memleak when mt7615_unregister_device() mt7615_tx_token_put() should get call before mt76_free_pending_txwi(). |
| CVE-2021-47021 | In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix memleak when mt7915_unregister_device() mt7915_tx_token_put() should get call before mt76_free_pending_txwi(). |
| CVE-2021-47020 | In the Linux kernel, the following vulnerability has been resolved: soundwire: stream: fix memory leak in stream config error path When stream config is failed, master runtime will release all slave runtime in the slave_rt_list, but slave runtime is not added to the list at this time. This patch frees slave runtime in the config error path to fix the memory leak. |
| CVE-2021-47019 | In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix possible invalid register access Disable the interrupt and synchronze for the pending irq handlers to ensure the irq tasklet is not being scheduled after the suspend to avoid the possible invalid register access acts when the host pcie controller is suspended. [17932.910534] mt7921e 0000:01:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 21375 usecs [17932.910590] pcieport 0000:00:00.0: calling pci_pm_suspend+0x0/0x22c @ 18565, parent: pci0000:00 [17932.910602] pcieport 0000:00:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 8 usecs [17932.910671] mtk-pcie 11230000.pcie: calling platform_pm_suspend+0x0/0x60 @ 22783, parent: soc [17932.910674] mtk-pcie 11230000.pcie: platform_pm_suspend+0x0/0x60 returned 0 after 0 usecs ... 17933.615352] x1 : 00000000000d4200 x0 : ffffff8269ca2300 [17933.620666] Call trace: [17933.623127] mt76_mmio_rr+0x28/0xf0 [mt76] [17933.627234] mt7921_rr+0x38/0x44 [mt7921e] [17933.631339] mt7921_irq_tasklet+0x54/0x1d8 [mt7921e] [17933.636309] tasklet_action_common+0x12c/0x16c [17933.640754] tasklet_action+0x24/0x2c [17933.644418] __do_softirq+0x16c/0x344 [17933.648082] irq_exit+0xa8/0xac [17933.651224] scheduler_ipi+0xd4/0x148 [17933.654890] handle_IPI+0x164/0x2d4 [17933.658379] gic_handle_irq+0x140/0x178 [17933.662216] el1_irq+0xb8/0x180 [17933.665361] cpuidle_enter_state+0xf8/0x204 [17933.669544] cpuidle_enter+0x38/0x4c [17933.673122] do_idle+0x1a4/0x2a8 [17933.676352] cpu_startup_entry+0x24/0x28 [17933.680276] rest_init+0xd4/0xe0 [17933.683508] arch_call_rest_init+0x10/0x18 [17933.687606] start_kernel+0x340/0x3b4 [17933.691279] Code: aa0003f5 d503201f f953eaa8 8b344108 (b9400113) [17933.697373] ---[ end trace a24b8e26ffbda3c5 ]--- [17933.767846] Kernel panic - not syncing: Fatal exception in interrupt |
| CVE-2021-47018 | In the Linux kernel, the following vulnerability has been resolved: powerpc/64: Fix the definition of the fixmap area At the time being, the fixmap area is defined at the top of the address space or just below KASAN. This definition is not valid for PPC64. For PPC64, use the top of the I/O space. Because of circular dependencies, it is not possible to include asm/fixmap.h in asm/book3s/64/pgtable.h , so define a fixed size AREA at the top of the I/O space for fixmap and ensure during build that the size is big enough. |
| CVE-2021-47017 | In the Linux kernel, the following vulnerability has been resolved: ath10k: Fix a use after free in ath10k_htc_send_bundle In ath10k_htc_send_bundle, the bundle_skb could be freed by dev_kfree_skb_any(bundle_skb). But the bundle_skb is used later by bundle_skb->len. As skb_len = bundle_skb->len, my patch replaces bundle_skb->len to skb_len after the bundle_skb was freed. |
| CVE-2021-47016 | In the Linux kernel, the following vulnerability has been resolved: m68k: mvme147,mvme16x: Don't wipe PCC timer config bits Don't clear the timer 1 configuration bits when clearing the interrupt flag and counter overflow. As Michael reported, "This results in no timer interrupts being delivered after the first. Initialization then hangs in calibrate_delay as the jiffies counter is not updated." On mvme16x, enable the timer after requesting the irq, consistent with mvme147. |
| CVE-2021-47015 | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix RX consumer index logic in the error path. In bnxt_rx_pkt(), the RX buffers are expected to complete in order. If the RX consumer index indicates an out of order buffer completion, it means we are hitting a hardware bug and the driver will abort all remaining RX packets and reset the RX ring. The RX consumer index that we pass to bnxt_discard_rx() is not correct. We should be passing the current index (tmp_raw_cons) instead of the old index (raw_cons). This bug can cause us to be at the wrong index when trying to abort the next RX packet. It can crash like this: #0 [ffff9bbcdf5c39a8] machine_kexec at ffffffff9b05e007 #1 [ffff9bbcdf5c3a00] __crash_kexec at ffffffff9b111232 #2 [ffff9bbcdf5c3ad0] panic at ffffffff9b07d61e #3 [ffff9bbcdf5c3b50] oops_end at ffffffff9b030978 #4 [ffff9bbcdf5c3b78] no_context at ffffffff9b06aaf0 #5 [ffff9bbcdf5c3bd8] __bad_area_nosemaphore at ffffffff9b06ae2e #6 [ffff9bbcdf5c3c28] bad_area_nosemaphore at ffffffff9b06af24 #7 [ffff9bbcdf5c3c38] __do_page_fault at ffffffff9b06b67e #8 [ffff9bbcdf5c3cb0] do_page_fault at ffffffff9b06bb12 #9 [ffff9bbcdf5c3ce0] page_fault at ffffffff9bc015c5 [exception RIP: bnxt_rx_pkt+237] RIP: ffffffffc0259cdd RSP: ffff9bbcdf5c3d98 RFLAGS: 00010213 RAX: 000000005dd8097f RBX: ffff9ba4cb11b7e0 RCX: ffffa923cf6e9000 RDX: 0000000000000fff RSI: 0000000000000627 RDI: 0000000000001000 RBP: ffff9bbcdf5c3e60 R8: 0000000000420003 R9: 000000000000020d R10: ffffa923cf6ec138 R11: ffff9bbcdf5c3e83 R12: ffff9ba4d6f928c0 R13: ffff9ba4cac28080 R14: ffff9ba4cb11b7f0 R15: ffff9ba4d5a30000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 |
| CVE-2021-47014 | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix wild memory access when clearing fragments while testing re-assembly/re-fragmentation using act_ct, it's possible to observe a crash like the following one: KASAN: maybe wild-memory-access in range [0x0001000000000448-0x000100000000044f] CPU: 50 PID: 0 Comm: swapper/50 Tainted: G S 5.12.0-rc7+ #424 Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:inet_frag_rbtree_purge+0x50/0xc0 Code: 00 fc ff df 48 89 c3 31 ed 48 89 df e8 a9 7a 38 ff 4c 89 fe 48 89 df 49 89 c6 e8 5b 3a 38 ff 48 8d 7b 40 48 89 f8 48 c1 e8 03 <42> 80 3c 20 00 75 59 48 8d bb d0 00 00 00 4c 8b 6b 40 48 89 f8 48 RSP: 0018:ffff888c31449db8 EFLAGS: 00010203 RAX: 0000200000000089 RBX: 000100000000040e RCX: ffffffff989eb960 RDX: 0000000000000140 RSI: ffffffff97cfb977 RDI: 000100000000044e RBP: 0000000000000900 R08: 0000000000000000 R09: ffffed1186289350 R10: 0000000000000003 R11: ffffed1186289350 R12: dffffc0000000000 R13: 000100000000040e R14: 0000000000000000 R15: ffff888155e02160 FS: 0000000000000000(0000) GS:ffff888c31440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005600cb70a5b8 CR3: 0000000a2c014005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> inet_frag_destroy+0xa9/0x150 call_timer_fn+0x2d/0x180 run_timer_softirq+0x4fe/0xe70 __do_softirq+0x197/0x5a0 irq_exit_rcu+0x1de/0x200 sysvec_apic_timer_interrupt+0x6b/0x80 </IRQ> when act_ct temporarily stores an IP fragment, restoring the skb qdisc cb results in putting random data in FRAG_CB(), and this causes those "wild" memory accesses later, when the rbtree is purged. Never overwrite the skb cb in case tcf_ct_handle_fragments() returns -EINPROGRESS. |
| CVE-2021-47013 | In the Linux kernel, the following vulnerability has been resolved: net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send In emac_mac_tx_buf_send, it calls emac_tx_fill_tpd(..,skb,..). If some error happens in emac_tx_fill_tpd(), the skb will be freed via dev_kfree_skb(skb) in error branch of emac_tx_fill_tpd(). But the freed skb is still used via skb->len by netdev_sent_queue(,skb->len). As i observed that emac_tx_fill_tpd() haven't modified the value of skb->len, thus my patch assigns skb->len to 'len' before the possible free and use 'len' instead of skb->len later. |
| CVE-2021-47012 | In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix a use after free in siw_alloc_mr Our code analyzer reported a UAF. In siw_alloc_mr(), it calls siw_mr_add_mem(mr,..). In the implementation of siw_mr_add_mem(), mem is assigned to mr->mem and then mem is freed via kfree(mem) if xa_alloc_cyclic() failed. Here, mr->mem still point to a freed object. After, the execution continue up to the err_out branch of siw_alloc_mr, and the freed mr->mem is used in siw_mr_drop_mem(mr). My patch moves "mr->mem = mem" behind the if (xa_alloc_cyclic(..)<0) {} section, to avoid the uaf. |
| CVE-2021-47011 | In the Linux kernel, the following vulnerability has been resolved: mm: memcontrol: slab: fix obtain a reference to a freeing memcg Patch series "Use obj_cgroup APIs to charge kmem pages", v5. Since Roman's series "The new cgroup slab memory controller" applied. All slab objects are charged with the new APIs of obj_cgroup. The new APIs introduce a struct obj_cgroup to charge slab objects. It prevents long-living objects from pinning the original memory cgroup in the memory. But there are still some corner objects (e.g. allocations larger than order-1 page on SLUB) which are not charged with the new APIs. Those objects (include the pages which are allocated from buddy allocator directly) are charged as kmem pages which still hold a reference to the memory cgroup. E.g. We know that the kernel stack is charged as kmem pages because the size of the kernel stack can be greater than 2 pages (e.g. 16KB on x86_64 or arm64). If we create a thread (suppose the thread stack is charged to memory cgroup A) and then move it from memory cgroup A to memory cgroup B. Because the kernel stack of the thread hold a reference to the memory cgroup A. The thread can pin the memory cgroup A in the memory even if we remove the cgroup A. If we want to see this scenario by using the following script. We can see that the system has added 500 dying cgroups (This is not a real world issue, just a script to show that the large kmallocs are charged as kmem pages which can pin the memory cgroup in the memory). #!/bin/bash cat /proc/cgroups | grep memory cd /sys/fs/cgroup/memory echo 1 > memory.move_charge_at_immigrate for i in range{1..500} do mkdir kmem_test echo $$ > kmem_test/cgroup.procs sleep 3600 & echo $$ > cgroup.procs echo `cat kmem_test/cgroup.procs` > cgroup.procs rmdir kmem_test done cat /proc/cgroups | grep memory This patchset aims to make those kmem pages to drop the reference to memory cgroup by using the APIs of obj_cgroup. Finally, we can see that the number of the dying cgroups will not increase if we run the above test script. This patch (of 7): The rcu_read_lock/unlock only can guarantee that the memcg will not be freed, but it cannot guarantee the success of css_get (which is in the refill_stock when cached memcg changed) to memcg. rcu_read_lock() memcg = obj_cgroup_memcg(old) __memcg_kmem_uncharge(memcg) refill_stock(memcg) if (stock->cached != memcg) // css_get can change the ref counter from 0 back to 1. css_get(&memcg->css) rcu_read_unlock() This fix is very like the commit: eefbfa7fd678 ("mm: memcg/slab: fix use after free in obj_cgroup_charge") Fix this by holding a reference to the memcg which is passed to the __memcg_kmem_uncharge() before calling __memcg_kmem_uncharge(). |
| CVE-2021-47010 | In the Linux kernel, the following vulnerability has been resolved: net: Only allow init netns to set default tcp cong to a restricted algo tcp_set_default_congestion_control() is netns-safe in that it writes to &net->ipv4.tcp_congestion_control, but it also sets ca->flags |= TCP_CONG_NON_RESTRICTED which is not namespaced. This has the unintended side-effect of changing the global net.ipv4.tcp_allowed_congestion_control sysctl, despite the fact that it is read-only: 97684f0970f6 ("net: Make tcp_allowed_congestion_control readonly in non-init netns") Resolve this netns "leak" by only allowing the init netns to set the default algorithm to one that is restricted. This restriction could be removed if tcp_allowed_congestion_control were namespace-ified in the future. This bug was uncovered with https://github.com/JonathonReinhart/linux-netns-sysctl-verify |
| CVE-2021-47009 | In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix memory leak on object td Two error return paths are neglecting to free allocated object td, causing a memory leak. Fix this by returning via the error return path that securely kfree's td. Fixes clang scan-build warning: security/keys/trusted-keys/trusted_tpm1.c:496:10: warning: Potential memory leak [unix.Malloc] |
| CVE-2021-47008 | In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Make sure GHCB is mapped before updating Access to the GHCB is mainly in the VMGEXIT path and it is known that the GHCB will be mapped. But there are two paths where it is possible the GHCB might not be mapped. The sev_vcpu_deliver_sipi_vector() routine will update the GHCB to inform the caller of the AP Reset Hold NAE event that a SIPI has been delivered. However, if a SIPI is performed without a corresponding AP Reset Hold, then the GHCB might not be mapped (depending on the previous VMEXIT), which will result in a NULL pointer dereference. The svm_complete_emulated_msr() routine will update the GHCB to inform the caller of a RDMSR/WRMSR operation about any errors. While it is likely that the GHCB will be mapped in this situation, add a safe guard in this path to be certain a NULL pointer dereference is not encountered. |
| CVE-2021-47007 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix panic during f2fs_resize_fs() f2fs_resize_fs() hangs in below callstack with testcase: - mkfs 16GB image & mount image - dd 8GB fileA - dd 8GB fileB - sync - rm fileA - sync - resize filesystem to 8GB kernel BUG at segment.c:2484! Call Trace: allocate_segment_by_default+0x92/0xf0 [f2fs] f2fs_allocate_data_block+0x44b/0x7e0 [f2fs] do_write_page+0x5a/0x110 [f2fs] f2fs_outplace_write_data+0x55/0x100 [f2fs] f2fs_do_write_data_page+0x392/0x850 [f2fs] move_data_page+0x233/0x320 [f2fs] do_garbage_collect+0x14d9/0x1660 [f2fs] free_segment_range+0x1f7/0x310 [f2fs] f2fs_resize_fs+0x118/0x330 [f2fs] __f2fs_ioctl+0x487/0x3680 [f2fs] __x64_sys_ioctl+0x8e/0xd0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The root cause is we forgot to check that whether we have enough space in resized filesystem to store all valid blocks in before-resizing filesystem, then allocator will run out-of-space during block migration in free_segment_range(). |
| CVE-2021-47006 | In the Linux kernel, the following vulnerability has been resolved: ARM: 9064/1: hw_breakpoint: Do not directly check the event's overflow_handler hook The commit 1879445dfa7b ("perf/core: Set event's default ::overflow_handler()") set a default event->overflow_handler in perf_event_alloc(), and replace the check event->overflow_handler with is_default_overflow_handler(), but one is missing. Currently, the bp->overflow_handler can not be NULL. As a result, enable_single_step() is always not invoked. Comments from Zhen Lei: https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/ |
| CVE-2021-47005 | In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix NULL pointer dereference for ->get_features() get_features ops of pci_epc_ops may return NULL, causing NULL pointer dereference in pci_epf_test_alloc_space function. Let us add a check for pci_epc_feature pointer in pci_epf_test_bind before we access it to avoid any such NULL pointer dereference and return -ENOTSUPP in case pci_epc_feature is not found. When the patch is not applied and EPC features is not implemented in the platform driver, we see the following dump due to kernel NULL pointer dereference. Call trace: pci_epf_test_bind+0xf4/0x388 pci_epf_bind+0x3c/0x80 pci_epc_epf_link+0xa8/0xcc configfs_symlink+0x1a4/0x48c vfs_symlink+0x104/0x184 do_symlinkat+0x80/0xd4 __arm64_sys_symlinkat+0x1c/0x24 el0_svc_common.constprop.3+0xb8/0x170 el0_svc_handler+0x70/0x88 el0_svc+0x8/0x640 Code: d2800581 b9403ab9 f9404ebb 8b394f60 (f9400400) ---[ end trace a438e3c5a24f9df0 ]--- |
| CVE-2021-47004 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid touching checkpointed data in get_victim() In CP disabling mode, there are two issues when using LFS or SSR | AT_SSR mode to select victim: 1. LFS is set to find source section during GC, the victim should have no checkpointed data, since after GC, section could not be set free for reuse. Previously, we only check valid chpt blocks in current segment rather than section, fix it. 2. SSR | AT_SSR are set to find target segment for writes which can be fully filled by checkpointed and newly written blocks, we should never select such segment, otherwise it can cause panic or data corruption during allocation, potential case is described as below: a) target segment has 'n' (n < 512) ckpt valid blocks b) GC migrates 'n' valid blocks to other segment (segment is still in dirty list) c) GC migrates '512 - n' blocks to target segment (segment has 'n' cp_vblocks and '512 - n' vblocks) d) If GC selects target segment via {AT,}SSR allocator, however there is no free space in targe segment. |
| CVE-2021-47003 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix potential null dereference on pointer status There are calls to idxd_cmd_exec that pass a null status pointer however a recent commit has added an assignment to *status that can end up with a null pointer dereference. The function expects a null status pointer sometimes as there is a later assignment to *status where status is first null checked. Fix the issue by null checking status before making the assignment. Addresses-Coverity: ("Explicit null dereferenced") |
| CVE-2021-47002 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix null pointer dereference in svc_rqst_free() When alloc_pages_node() returns null in svc_rqst_alloc(), the null rq_scratch_page pointer will be dereferenced when calling put_page() in svc_rqst_free(). Fix it by adding a null check. Addresses-Coverity: ("Dereference after null check") |
| CVE-2021-47001 | In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix cwnd update ordering After a reconnect, the reply handler is opening the cwnd (and thus enabling more RPC Calls to be sent) /before/ rpcrdma_post_recvs() can post enough Receive WRs to receive their replies. This causes an RNR and the new connection is lost immediately. The race is most clearly exposed when KASAN and disconnect injection are enabled. This slows down rpcrdma_rep_create() enough to allow the send side to post a bunch of RPC Calls before the Receive completion handler can invoke ib_post_recv(). |
| CVE-2021-47000 | In the Linux kernel, the following vulnerability has been resolved: ceph: fix inode leak on getattr error in __fh_to_dentry |
| CVE-2021-46999 | In the Linux kernel, the following vulnerability has been resolved: sctp: do asoc update earlier in sctp_sf_do_dupcook_a There's a panic that occurs in a few of envs, the call trace is as below: [] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI [] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp] [] sctp_assoc_control_transport+0x1b9/0x210 [sctp] [] sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp] [] sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp] [] sctp_do_sm+0xc3/0x2a0 [sctp] [] sctp_generate_timeout_event+0x81/0xf0 [sctp] This is caused by a transport use-after-free issue. When processing a duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK and SHUTDOWN chunks are allocated with the transort from the new asoc. However, later in the sideeffect machine, the old asoc is used to send them out and old asoc's shutdown_last_sent_to is set to the transport that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually belongs to the new asoc. After the new_asoc is freed and the old asoc T2 timeout, the old asoc's shutdown_last_sent_to that is already freed would be accessed in sctp_sf_t2_timer_expire(). Thanks Alexander and Jere for helping dig into this issue. To fix it, this patch is to do the asoc update first, then allocate the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This would make more sense, as a chunk from an asoc shouldn't be sent out with another asoc. We had fixed quite a few issues caused by this. |
| CVE-2021-46998 | In the Linux kernel, the following vulnerability has been resolved: ethernet:enic: Fix a use after free bug in enic_hard_start_xmit In enic_hard_start_xmit, it calls enic_queue_wq_skb(). Inside enic_queue_wq_skb, if some error happens, the skb will be freed by dev_kfree_skb(skb). But the freed skb is still used in skb_tx_timestamp(skb). My patch makes enic_queue_wq_skb() return error and goto spin_unlock() incase of error. The solution is provided by Govind. See https://lkml.org/lkml/2021/4/30/961. |
| CVE-2021-46997 | In the Linux kernel, the following vulnerability has been resolved: arm64: entry: always set GIC_PRIO_PSR_I_SET during entry Zenghui reports that booting a kernel with "irqchip.gicv3_pseudo_nmi=1" on the command line hits a warning during kernel entry, due to the way we manipulate the PMR. Early in the entry sequence, we call lockdep_hardirqs_off() to inform lockdep that interrupts have been masked (as the HW sets DAIF wqhen entering an exception). Architecturally PMR_EL1 is not affected by exception entry, and we don't set GIC_PRIO_PSR_I_SET in the PMR early in the exception entry sequence, so early in exception entry the PMR can indicate that interrupts are unmasked even though they are masked by DAIF. If DEBUG_LOCKDEP is selected, lockdep_hardirqs_off() will check that interrupts are masked, before we set GIC_PRIO_PSR_I_SET in any of the exception entry paths, and hence lockdep_hardirqs_off() will WARN() that something is amiss. We can avoid this by consistently setting GIC_PRIO_PSR_I_SET during exception entry so that kernel code sees a consistent environment. We must also update local_daif_inherit() to undo this, as currently only touches DAIF. For other paths, local_daif_restore() will update both DAIF and the PMR. With this done, we can remove the existing special cases which set this later in the entry code. We always use (GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET) for consistency with local_daif_save(), as this will warn if it ever encounters (GIC_PRIO_IRQOFF | GIC_PRIO_PSR_I_SET), and never sets this itself. This matches the gic_prio_kentry_setup that we have to retain for ret_to_user. The original splat from Zenghui's report was: | DEBUG_LOCKS_WARN_ON(!irqs_disabled()) | WARNING: CPU: 3 PID: 125 at kernel/locking/lockdep.c:4258 lockdep_hardirqs_off+0xd4/0xe8 | Modules linked in: | CPU: 3 PID: 125 Comm: modprobe Tainted: G W 5.12.0-rc8+ #463 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO BTYPE=--) | pc : lockdep_hardirqs_off+0xd4/0xe8 | lr : lockdep_hardirqs_off+0xd4/0xe8 | sp : ffff80002a39bad0 | pmr_save: 000000e0 | x29: ffff80002a39bad0 x28: ffff0000de214bc0 | x27: ffff0000de1c0400 x26: 000000000049b328 | x25: 0000000000406f30 x24: ffff0000de1c00a0 | x23: 0000000020400005 x22: ffff8000105f747c | x21: 0000000096000044 x20: 0000000000498ef9 | x19: ffff80002a39bc88 x18: ffffffffffffffff | x17: 0000000000000000 x16: ffff800011c61eb0 | x15: ffff800011700a88 x14: 0720072007200720 | x13: 0720072007200720 x12: 0720072007200720 | x11: 0720072007200720 x10: 0720072007200720 | x9 : ffff80002a39bad0 x8 : ffff80002a39bad0 | x7 : ffff8000119f0800 x6 : c0000000ffff7fff | x5 : ffff8000119f07a8 x4 : 0000000000000001 | x3 : 9bcdab23f2432800 x2 : ffff800011730538 | x1 : 9bcdab23f2432800 x0 : 0000000000000000 | Call trace: | lockdep_hardirqs_off+0xd4/0xe8 | enter_from_kernel_mode.isra.5+0x7c/0xa8 | el1_abort+0x24/0x100 | el1_sync_handler+0x80/0xd0 | el1_sync+0x6c/0x100 | __arch_clear_user+0xc/0x90 | load_elf_binary+0x9fc/0x1450 | bprm_execve+0x404/0x880 | kernel_execve+0x180/0x188 | call_usermodehelper_exec_async+0xdc/0x158 | ret_from_fork+0x10/0x18 |
| CVE-2021-46996 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: Fix a memleak from userdata error path in new objects Release object name if userdata allocation fails. |
| CVE-2021-46995 | In the Linux kernel, the following vulnerability has been resolved: can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe When we converted this code to use dev_err_probe() we accidentally removed a return. It means that if devm_clk_get() it will lead to an Oops when we call clk_get_rate() on the next line. |
| CVE-2021-46994 | In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix resume from sleep before interface was brought up Since 8ce8c0abcba3 the driver queues work via priv->restart_work when resuming after suspend, even when the interface was not previously enabled. This causes a null dereference error as the workqueue is only allocated and initialized in mcp251x_open(). To fix this we move the workqueue init to mcp251x_can_probe() as there is no reason to do it later and repeat it whenever mcp251x_open() is called. [mkl: fix error handling in mcp251x_stop()] |
| CVE-2021-46993 | In the Linux kernel, the following vulnerability has been resolved: sched: Fix out-of-bound access in uclamp Util-clamp places tasks in different buckets based on their clamp values for performance reasons. However, the size of buckets is currently computed using a rounding division, which can lead to an off-by-one error in some configurations. For instance, with 20 buckets, the bucket size will be 1024/20=51. A task with a clamp of 1024 will be mapped to bucket id 1024/51=20. Sadly, correct indexes are in range [0,19], hence leading to an out of bound memory access. Clamp the bucket id to fix the issue. |
| CVE-2021-46992 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: avoid overflows in nft_hash_buckets() Number of buckets being stored in 32bit variables, we have to ensure that no overflows occur in nft_hash_buckets() syzbot injected a size == 0x40000000 and reported: UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 1 PID: 29539 Comm: syz-executor.4 Not tainted 5.12.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327 __roundup_pow_of_two include/linux/log2.h:57 [inline] nft_hash_buckets net/netfilter/nft_set_hash.c:411 [inline] nft_hash_estimate.cold+0x19/0x1e net/netfilter/nft_set_hash.c:652 nft_select_set_ops net/netfilter/nf_tables_api.c:3586 [inline] nf_tables_newset+0xe62/0x3110 net/netfilter/nf_tables_api.c:4322 nfnetlink_rcv_batch+0xa09/0x24b0 net/netfilter/nfnetlink.c:488 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:612 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:630 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 |
| CVE-2021-46991 | In the Linux kernel, the following vulnerability has been resolved: i40e: Fix use-after-free in i40e_client_subtask() Currently the call to i40e_client_del_instance frees the object pf->cinst, however pf->cinst->lan_info is being accessed after the free. Fix this by adding the missing return. Addresses-Coverity: ("Read from pointer after free") |
| CVE-2021-46990 | In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix crashes when toggling entry flush barrier The entry flush mitigation can be enabled/disabled at runtime via a debugfs file (entry_flush), which causes the kernel to patch itself to enable/disable the relevant mitigations. However depending on which mitigation we're using, it may not be safe to do that patching while other CPUs are active. For example the following crash: sleeper[15639]: segfault (11) at c000000000004c20 nip c000000000004c20 lr c000000000004c20 Shows that we returned to userspace with a corrupted LR that points into the kernel, due to executing the partially patched call to the fallback entry flush (ie. we missed the LR restore). Fix it by doing the patching under stop machine. The CPUs that aren't doing the patching will be spinning in the core of the stop machine logic. That is currently sufficient for our purposes, because none of the patching we do is to that code or anywhere in the vicinity. |
| CVE-2021-46989 | In the Linux kernel, the following vulnerability has been resolved: hfsplus: prevent corruption in shrinking truncate I believe there are some issues introduced by commit 31651c607151 ("hfsplus: avoid deadlock on file truncation") HFS+ has extent records which always contains 8 extents. In case the first extent record in catalog file gets full, new ones are allocated from extents overflow file. In case shrinking truncate happens to middle of an extent record which locates in extents overflow file, the logic in hfsplus_file_truncate() was changed so that call to hfs_brec_remove() is not guarded any more. Right action would be just freeing the extents that exceed the new size inside extent record by calling hfsplus_free_extents(), and then check if the whole extent record should be removed. However since the guard (blk_cnt > start) is now after the call to hfs_brec_remove(), this has unfortunate effect that the last matching extent record is removed unconditionally. To reproduce this issue, create a file which has at least 10 extents, and then perform shrinking truncate into middle of the last extent record, so that the number of remaining extents is not under or divisible by 8. This causes the last extent record (8 extents) to be removed totally instead of truncating into middle of it. Thus this causes corruption, and lost data. Fix for this is simply checking if the new truncated end is below the start of this extent record, making it safe to remove the full extent record. However call to hfs_brec_remove() can't be moved to it's previous place since we're dropping ->tree_lock and it can cause a race condition and the cached info being invalidated possibly corrupting the node data. Another issue is related to this one. When entering into the block (blk_cnt > start) we are not holding the ->tree_lock. We break out from the loop not holding the lock, but hfs_find_exit() does unlock it. Not sure if it's possible for someone else to take the lock under our feet, but it can cause hard to debug errors and premature unlocking. Even if there's no real risk of it, the locking should still always be kept in balance. Thus taking the lock now just before the check. |
| CVE-2021-46988 | In the Linux kernel, the following vulnerability has been resolved: userfaultfd: release page in error path to avoid BUG_ON Consider the following sequence of events: 1. Userspace issues a UFFD ioctl, which ends up calling into shmem_mfill_atomic_pte(). We successfully account the blocks, we shmem_alloc_page(), but then the copy_from_user() fails. We return -ENOENT. We don't release the page we allocated. 2. Our caller detects this error code, tries the copy_from_user() after dropping the mmap_lock, and retries, calling back into shmem_mfill_atomic_pte(). 3. Meanwhile, let's say another process filled up the tmpfs being used. 4. So shmem_mfill_atomic_pte() fails to account blocks this time, and immediately returns - without releasing the page. This triggers a BUG_ON in our caller, which asserts that the page should always be consumed, unless -ENOENT is returned. To fix this, detect if we have such a "dangling" page when accounting fails, and if so, release it before returning. |
| CVE-2021-46987 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock when cloning inline extents and using qgroups There are a few exceptional cases where cloning an inline extent needs to copy the inline extent data into a page of the destination inode. When this happens, we end up starting a transaction while having a dirty page for the destination inode and while having the range locked in the destination's inode iotree too. Because when reserving metadata space for a transaction we may need to flush existing delalloc in case there is not enough free space, we have a mechanism in place to prevent a deadlock, which was introduced in commit 3d45f221ce627d ("btrfs: fix deadlock when cloning inline extent and low on free metadata space"). However when using qgroups, a transaction also reserves metadata qgroup space, which can also result in flushing delalloc in case there is not enough available space at the moment. When this happens we deadlock, since flushing delalloc requires locking the file range in the inode's iotree and the range was already locked at the very beginning of the clone operation, before attempting to start the transaction. When this issue happens, stack traces like the following are reported: [72747.556262] task:kworker/u81:9 state:D stack: 0 pid: 225 ppid: 2 flags:0x00004000 [72747.556268] Workqueue: writeback wb_workfn (flush-btrfs-1142) [72747.556271] Call Trace: [72747.556273] __schedule+0x296/0x760 [72747.556277] schedule+0x3c/0xa0 [72747.556279] io_schedule+0x12/0x40 [72747.556284] __lock_page+0x13c/0x280 [72747.556287] ? generic_file_readonly_mmap+0x70/0x70 [72747.556325] extent_write_cache_pages+0x22a/0x440 [btrfs] [72747.556331] ? __set_page_dirty_nobuffers+0xe7/0x160 [72747.556358] ? set_extent_buffer_dirty+0x5e/0x80 [btrfs] [72747.556362] ? update_group_capacity+0x25/0x210 [72747.556366] ? cpumask_next_and+0x1a/0x20 [72747.556391] extent_writepages+0x44/0xa0 [btrfs] [72747.556394] do_writepages+0x41/0xd0 [72747.556398] __writeback_single_inode+0x39/0x2a0 [72747.556403] writeback_sb_inodes+0x1ea/0x440 [72747.556407] __writeback_inodes_wb+0x5f/0xc0 [72747.556410] wb_writeback+0x235/0x2b0 [72747.556414] ? get_nr_inodes+0x35/0x50 [72747.556417] wb_workfn+0x354/0x490 [72747.556420] ? newidle_balance+0x2c5/0x3e0 [72747.556424] process_one_work+0x1aa/0x340 [72747.556426] worker_thread+0x30/0x390 [72747.556429] ? create_worker+0x1a0/0x1a0 [72747.556432] kthread+0x116/0x130 [72747.556435] ? kthread_park+0x80/0x80 [72747.556438] ret_from_fork+0x1f/0x30 [72747.566958] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs] [72747.566961] Call Trace: [72747.566964] __schedule+0x296/0x760 [72747.566968] ? finish_wait+0x80/0x80 [72747.566970] schedule+0x3c/0xa0 [72747.566995] wait_extent_bit.constprop.68+0x13b/0x1c0 [btrfs] [72747.566999] ? finish_wait+0x80/0x80 [72747.567024] lock_extent_bits+0x37/0x90 [btrfs] [72747.567047] btrfs_invalidatepage+0x299/0x2c0 [btrfs] [72747.567051] ? find_get_pages_range_tag+0x2cd/0x380 [72747.567076] __extent_writepage+0x203/0x320 [btrfs] [72747.567102] extent_write_cache_pages+0x2bb/0x440 [btrfs] [72747.567106] ? update_load_avg+0x7e/0x5f0 [72747.567109] ? enqueue_entity+0xf4/0x6f0 [72747.567134] extent_writepages+0x44/0xa0 [btrfs] [72747.567137] ? enqueue_task_fair+0x93/0x6f0 [72747.567140] do_writepages+0x41/0xd0 [72747.567144] __filemap_fdatawrite_range+0xc7/0x100 [72747.567167] btrfs_run_delalloc_work+0x17/0x40 [btrfs] [72747.567195] btrfs_work_helper+0xc2/0x300 [btrfs] [72747.567200] process_one_work+0x1aa/0x340 [72747.567202] worker_thread+0x30/0x390 [72747.567205] ? create_worker+0x1a0/0x1a0 [72747.567208] kthread+0x116/0x130 [72747.567211] ? kthread_park+0x80/0x80 [72747.567214] ret_from_fork+0x1f/0x30 [72747.569686] task:fsstress state:D stack: ---truncated--- |
| CVE-2021-46986 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Free gadget structure only after freeing endpoints As part of commit e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically") the dwc3_gadget_release() was added which will free the dwc->gadget structure upon the device's removal when usb_del_gadget_udc() is called in dwc3_gadget_exit(). However, simply freeing the gadget results a dangling pointer situation: the endpoints created in dwc3_gadget_init_endpoints() have their dep->endpoint.ep_list members chained off the list_head anchored at dwc->gadget->ep_list. Thus when dwc->gadget is freed, the first dwc3_ep in the list now has a dangling prev pointer and likewise for the next pointer of the dwc3_ep at the tail of the list. The dwc3_gadget_free_endpoints() that follows will result in a use-after-free when it calls list_del(). This was caught by enabling KASAN and performing a driver unbind. The recent commit 568262bf5492 ("usb: dwc3: core: Add shutdown callback for dwc3") also exposes this as a panic during shutdown. There are a few possibilities to fix this. One could be to perform a list_del() of the gadget->ep_list itself which removes it from the rest of the dwc3_ep chain. Another approach is what this patch does, by splitting up the usb_del_gadget_udc() call into its separate "del" and "put" components. This allows dwc3_gadget_free_endpoints() to be called before the gadget is finally freed with usb_put_gadget(). |
| CVE-2021-46985 | In the Linux kernel, the following vulnerability has been resolved: ACPI: scan: Fix a memory leak in an error handling path If 'acpi_device_set_name()' fails, we must free 'acpi_device_bus_id->bus_id' or there is a (potential) memory leak. |
| CVE-2021-46984 | In the Linux kernel, the following vulnerability has been resolved: kyber: fix out of bounds access when preempted __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx. This "works" accidentally most of the time, but it can cause us to read garbage if the second ctx came from an hctx with more ctx's than the first one (i.e., if ctx->index_hw[hctx->type] > hctx->nr_ctx). This manifested as this UBSAN array index out of bounds error reported by Jakub: UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9 index 13106 is out of range for type 'long unsigned int [128]' Call Trace: dump_stack+0xa4/0xe5 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34 queued_spin_lock_slowpath+0x476/0x480 do_raw_spin_lock+0x1c2/0x1d0 kyber_bio_merge+0x112/0x180 blk_mq_submit_bio+0x1f5/0x1100 submit_bio_noacct+0x7b0/0x870 submit_bio+0xc2/0x3a0 btrfs_map_bio+0x4f0/0x9d0 btrfs_submit_data_bio+0x24e/0x310 submit_one_bio+0x7f/0xb0 submit_extent_page+0xc4/0x440 __extent_writepage_io+0x2b8/0x5e0 __extent_writepage+0x28d/0x6e0 extent_write_cache_pages+0x4d7/0x7a0 extent_writepages+0xa2/0x110 do_writepages+0x8f/0x180 __writeback_single_inode+0x99/0x7f0 writeback_sb_inodes+0x34e/0x790 __writeback_inodes_wb+0x9e/0x120 wb_writeback+0x4d2/0x660 wb_workfn+0x64d/0xa10 process_one_work+0x53a/0xa80 worker_thread+0x69/0x5b0 kthread+0x20b/0x240 ret_from_fork+0x1f/0x30 Only Kyber uses the hctx, so fix it by passing the request_queue to ->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can map the queues itself to avoid the mismatch. |
| CVE-2021-46983 | In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: Fix NULL deref when SEND is completed with error When running some traffic and taking down the link on peer, a retry counter exceeded error is received. This leads to nvmet_rdma_error_comp which tried accessing the cq_context to obtain the queue. The cq_context is no longer valid after the fix to use shared CQ mechanism and should be obtained similar to how it is obtained in other functions from the wc->qp. [ 905.786331] nvmet_rdma: SEND for CQE 0x00000000e3337f90 failed with status transport retry counter exceeded (12). [ 905.832048] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 905.839919] PGD 0 P4D 0 [ 905.842464] Oops: 0000 1 SMP NOPTI [ 905.846144] CPU: 13 PID: 1557 Comm: kworker/13:1H Kdump: loaded Tainted: G OE --------- - - 4.18.0-304.el8.x86_64 #1 [ 905.872135] RIP: 0010:nvmet_rdma_error_comp+0x5/0x1b [nvmet_rdma] [ 905.878259] Code: 19 4f c0 e8 89 b3 a5 f6 e9 5b e0 ff ff 0f b7 75 14 4c 89 ea 48 c7 c7 08 1a 4f c0 e8 71 b3 a5 f6 e9 4b e0 ff ff 0f 1f 44 00 00 <48> 8b 47 48 48 85 c0 74 08 48 89 c7 e9 98 bf 49 00 e9 c3 e3 ff ff [ 905.897135] RSP: 0018:ffffab601c45fe28 EFLAGS: 00010246 [ 905.902387] RAX: 0000000000000065 RBX: ffff9e729ea2f800 RCX: 0000000000000000 [ 905.909558] RDX: 0000000000000000 RSI: ffff9e72df9567c8 RDI: 0000000000000000 [ 905.916731] RBP: ffff9e729ea2b400 R08: 000000000000074d R09: 0000000000000074 [ 905.923903] R10: 0000000000000000 R11: ffffab601c45fcc0 R12: 0000000000000010 [ 905.931074] R13: 0000000000000000 R14: 0000000000000010 R15: ffff9e729ea2f400 [ 905.938247] FS: 0000000000000000(0000) GS:ffff9e72df940000(0000) knlGS:0000000000000000 [ 905.938249] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 905.950067] nvmet_rdma: SEND for CQE 0x00000000c7356cca failed with status transport retry counter exceeded (12). [ 905.961855] CR2: 0000000000000048 CR3: 000000678d010004 CR4: 00000000007706e0 [ 905.961855] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 905.961856] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 905.961857] PKRU: 55555554 [ 906.010315] Call Trace: [ 906.012778] __ib_process_cq+0x89/0x170 [ib_core] [ 906.017509] ib_cq_poll_work+0x26/0x80 [ib_core] [ 906.022152] process_one_work+0x1a7/0x360 [ 906.026182] ? create_worker+0x1a0/0x1a0 [ 906.030123] worker_thread+0x30/0x390 [ 906.033802] ? create_worker+0x1a0/0x1a0 [ 906.037744] kthread+0x116/0x130 [ 906.040988] ? kthread_flush_work_fn+0x10/0x10 [ 906.045456] ret_from_fork+0x1f/0x40 |
| CVE-2021-46982 | In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix race condition of overwrite vs truncate pos_fsstress testcase complains a panic as belew: ------------[ cut here ]------------ kernel BUG at fs/f2fs/compress.c:1082! invalid opcode: 0000 [#1] SMP PTI CPU: 4 PID: 2753477 Comm: kworker/u16:2 Tainted: G OE 5.12.0-rc1-custom #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Workqueue: writeback wb_workfn (flush-252:16) RIP: 0010:prepare_compress_overwrite+0x4c0/0x760 [f2fs] Call Trace: f2fs_prepare_compress_overwrite+0x5f/0x80 [f2fs] f2fs_write_cache_pages+0x468/0x8a0 [f2fs] f2fs_write_data_pages+0x2a4/0x2f0 [f2fs] do_writepages+0x38/0xc0 __writeback_single_inode+0x44/0x2a0 writeback_sb_inodes+0x223/0x4d0 __writeback_inodes_wb+0x56/0xf0 wb_writeback+0x1dd/0x290 wb_workfn+0x309/0x500 process_one_work+0x220/0x3c0 worker_thread+0x53/0x420 kthread+0x12f/0x150 ret_from_fork+0x22/0x30 The root cause is truncate() may race with overwrite as below, so that one reference count left in page can not guarantee the page attaching in mapping tree all the time, after truncation, later find_lock_page() may return NULL pointer. - prepare_compress_overwrite - f2fs_pagecache_get_page - unlock_page - f2fs_setattr - truncate_setsize - truncate_inode_page - delete_from_page_cache - find_lock_page Fix this by avoiding referencing updated page. |
| CVE-2021-46981 | In the Linux kernel, the following vulnerability has been resolved: nbd: Fix NULL pointer in flush_workqueue Open /dev/nbdX first, the config_refs will be 1 and the pointers in nbd_device are still null. Disconnect /dev/nbdX, then reference a null recv_workq. The protection by config_refs in nbd_genl_disconnect is useless. [ 656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 656.368943] #PF: supervisor write access in kernel mode [ 656.369844] #PF: error_code(0x0002) - not-present page [ 656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0 [ 656.371693] Oops: 0002 [#1] SMP [ 656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c84d28 #1 [ 656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 656.375904] RIP: 0010:mutex_lock+0x29/0x60 [ 656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00 <f0> 48 0f b1 55 d [ 656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246 [ 656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020 [ 656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318 [ 656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40 [ 656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00 [ 656.382166] FS: 00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000 [ 656.382806] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0 [ 656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 656.384927] Call Trace: [ 656.385111] flush_workqueue+0x92/0x6c0 [ 656.385395] nbd_disconnect_and_put+0x81/0xd0 [ 656.385716] nbd_genl_disconnect+0x125/0x2a0 [ 656.386034] genl_family_rcv_msg_doit.isra.0+0x102/0x1b0 [ 656.386422] genl_rcv_msg+0xfc/0x2b0 [ 656.386685] ? nbd_ioctl+0x490/0x490 [ 656.386954] ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0 [ 656.387354] netlink_rcv_skb+0x62/0x180 [ 656.387638] genl_rcv+0x34/0x60 [ 656.387874] netlink_unicast+0x26d/0x590 [ 656.388162] netlink_sendmsg+0x398/0x6c0 [ 656.388451] ? netlink_rcv_skb+0x180/0x180 [ 656.388750] ____sys_sendmsg+0x1da/0x320 [ 656.389038] ? ____sys_recvmsg+0x130/0x220 [ 656.389334] ___sys_sendmsg+0x8e/0xf0 [ 656.389605] ? ___sys_recvmsg+0xa2/0xf0 [ 656.389889] ? handle_mm_fault+0x1671/0x21d0 [ 656.390201] __sys_sendmsg+0x6d/0xe0 [ 656.390464] __x64_sys_sendmsg+0x23/0x30 [ 656.390751] do_syscall_64+0x45/0x70 [ 656.391017] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put(). |
| CVE-2021-46980 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4 commit 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects in PD mode") introduced retrieval of the PDOs when connected to a PD-capable source. But only the first 4 PDOs are received since that is the maximum number that can be fetched at a time given the MESSAGE_IN length limitation (16 bytes). However, as per the PD spec a connected source may advertise up to a maximum of 7 PDOs. If such a source is connected it's possible the PPM could have negotiated a power contract with one of the PDOs at index greater than 4, and would be reflected in the request data object's (RDO) object position field. This would result in an out-of-bounds access when the rdo_index() is used to index into the src_pdos array in ucsi_psy_get_voltage_now(). With the help of the UBSAN -fsanitize=array-bounds checker enabled this exact issue is revealed when connecting to a PD source adapter that advertise 5 PDOs and the PPM enters a contract having selected the 5th one. [ 151.545106][ T70] Unexpected kernel BRK exception at EL1 [ 151.545112][ T70] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP ... [ 151.545499][ T70] pc : ucsi_psy_get_prop+0x208/0x20c [ 151.545507][ T70] lr : power_supply_show_property+0xc0/0x328 ... [ 151.545542][ T70] Call trace: [ 151.545544][ T70] ucsi_psy_get_prop+0x208/0x20c [ 151.545546][ T70] power_supply_uevent+0x1a4/0x2f0 [ 151.545550][ T70] dev_uevent+0x200/0x384 [ 151.545555][ T70] kobject_uevent_env+0x1d4/0x7e8 [ 151.545557][ T70] power_supply_changed_work+0x174/0x31c [ 151.545562][ T70] process_one_work+0x244/0x6f0 [ 151.545564][ T70] worker_thread+0x3e0/0xa64 We can resolve this by instead retrieving and storing up to the maximum of 7 PDOs in the con->src_pdos array. This would involve two calls to the GET_PDOS command. |
| CVE-2021-46979 | In the Linux kernel, the following vulnerability has been resolved: iio: core: fix ioctl handlers removal Currently ioctl handlers are removed twice. For the first time during iio_device_unregister() then later on inside iio_device_unregister_eventset() and iio_buffers_free_sysfs_and_mask(). Double free leads to kernel panic. Fix this by not touching ioctl handlers list directly but rather letting code responsible for registration call the matching cleanup routine itself. |
| CVE-2021-46978 | In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always make an attempt to map eVMCS after migration When enlightened VMCS is in use and nested state is migrated with vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr' and we can't read it from VP assist page because userspace may decide to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state (and QEMU, for example, does exactly that). To make sure eVMCS is mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES request. Commit f2c7ef3ba955 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit") added KVM_REQ_GET_NESTED_STATE_PAGES clearing to nested_vmx_vmexit() to make sure MSR permission bitmap is not switched when an immediate exit from L2 to L1 happens right after migration (caused by a pending event, for example). Unfortunately, in the exact same situation we still need to have eVMCS mapped so nested_sync_vmcs12_to_shadow() reflects changes in VMCS12 to eVMCS. As a band-aid, restore nested_get_evmcs_page() when clearing KVM_REQ_GET_NESTED_STATE_PAGES in nested_vmx_vmexit(). The 'fix' is far from being ideal as we can't easily propagate possible failures and even if we could, this is most likely already too late to do so. The whole 'KVM_REQ_GET_NESTED_STATE_PAGES' idea for mapping eVMCS after migration seems to be fragile as we diverge too much from the 'native' path when vmptr loading happens on vmx_set_nested_state(). |
| CVE-2021-46977 | In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Disable preemption when probing user return MSRs Disable preemption when probing a user return MSR via RDSMR/WRMSR. If the MSR holds a different value per logical CPU, the WRMSR could corrupt the host's value if KVM is preempted between the RDMSR and WRMSR, and then rescheduled on a different CPU. Opportunistically land the helper in common x86, SVM will use the helper in a future commit. |
| CVE-2021-46976 | In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix crash in auto_retire The retire logic uses the 2 lower bits of the pointer to the retire function to store flags. However, the auto_retire function is not guaranteed to be aligned to a multiple of 4, which causes crashes as we jump to the wrong address, for example like this: 2021-04-24T18:03:53.804300Z WARNING kernel: [ 516.876901] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI 2021-04-24T18:03:53.804310Z WARNING kernel: [ 516.876906] CPU: 7 PID: 146 Comm: kworker/u16:6 Tainted: G U 5.4.105-13595-g3cd84167b2df #1 2021-04-24T18:03:53.804311Z WARNING kernel: [ 516.876907] Hardware name: Google Volteer2/Volteer2, BIOS Google_Volteer2.13672.76.0 02/22/2021 2021-04-24T18:03:53.804312Z WARNING kernel: [ 516.876911] Workqueue: events_unbound active_work 2021-04-24T18:03:53.804313Z WARNING kernel: [ 516.876914] RIP: 0010:auto_retire+0x1/0x20 2021-04-24T18:03:53.804314Z WARNING kernel: [ 516.876916] Code: e8 01 f2 ff ff eb 02 31 db 48 89 d8 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 f0 ff 87 c8 00 00 00 0f 88 ab 47 4a 00 31 c0 5d c3 0f <1f> 44 00 00 55 48 89 e5 f0 ff 8f c8 00 00 00 0f 88 9a 47 4a 00 74 2021-04-24T18:03:53.804319Z WARNING kernel: [ 516.876918] RSP: 0018:ffff9b4d809fbe38 EFLAGS: 00010286 2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876919] RAX: 0000000000000007 RBX: ffff927915079600 RCX: 0000000000000007 2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876921] RDX: ffff9b4d809fbe40 RSI: 0000000000000286 RDI: ffff927915079600 2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876922] RBP: ffff9b4d809fbe68 R08: 8080808080808080 R09: fefefefefefefeff 2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876924] R10: 0000000000000010 R11: ffffffff92e44bd8 R12: ffff9279150796a0 2021-04-24T18:03:53.804322Z WARNING kernel: [ 516.876925] R13: ffff92791c368180 R14: ffff927915079640 R15: 000000001c867605 2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876926] FS: 0000000000000000(0000) GS:ffff92791ffc0000(0000) knlGS:0000000000000000 2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876928] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 2021-04-24T18:03:53.804324Z WARNING kernel: [ 516.876929] CR2: 0000239514955000 CR3: 00000007f82da001 CR4: 0000000000760ee0 2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876930] PKRU: 55555554 2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876931] Call Trace: 2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876935] __active_retire+0x77/0xcf 2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876939] process_one_work+0x1da/0x394 2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876941] worker_thread+0x216/0x375 2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876944] kthread+0x147/0x156 2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876946] ? pr_cont_work+0x58/0x58 2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876948] ? kthread_blkcg+0x2e/0x2e 2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876950] ret_from_fork+0x1f/0x40 2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876952] Modules linked in: cdc_mbim cdc_ncm cdc_wdm xt_cgroup rfcomm cmac algif_hash algif_skcipher af_alg xt_MASQUERADE uinput snd_soc_rt5682_sdw snd_soc_rt5682 snd_soc_max98373_sdw snd_soc_max98373 snd_soc_rl6231 regmap_sdw snd_soc_sof_sdw snd_soc_hdac_hdmi snd_soc_dmic snd_hda_codec_hdmi snd_sof_pci snd_sof_intel_hda_common intel_ipu6_psys snd_sof_xtensa_dsp soundwire_intel soundwire_generic_allocation soundwire_cadence snd_sof_intel_hda snd_sof snd_soc_hdac_hda snd_soc_acpi_intel_match snd_soc_acpi snd_hda_ext_core soundwire_bus snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core intel_ipu6_isys videobuf2_dma_contig videobuf2_v4l2 videobuf2_common videobuf2_memops mei_hdcp intel_ipu6 ov2740 ov8856 at24 sx9310 dw9768 v4l2_fwnode cros_ec_typec intel_pmc_mux roles acpi_als typec fuse iio_trig_sysfs cros_ec_light_prox cros_ec_lid_angle cros_ec_sensors cros ---truncated--- |
| CVE-2021-46974 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix masking negation logic upon negative dst register The negation logic for the case where the off_reg is sitting in the dst register is not correct given then we cannot just invert the add to a sub or vice versa. As a fix, perform the final bitwise and-op unconditionally into AX from the off_reg, then move the pointer from the src to dst and finally use AX as the source for the original pointer arithmetic operation such that the inversion yields a correct result. The single non-AX mov in between is possible given constant blinding is retaining it as it's not an immediate based operation. |
| CVE-2021-46973 | In the Linux kernel, the following vulnerability has been resolved: net: qrtr: Avoid potential use after free in MHI send It is possible that the MHI ul_callback will be invoked immediately following the queueing of the skb for transmission, leading to the callback decrementing the refcount of the associated sk and freeing the skb. As such the dereference of skb and the increment of the sk refcount must happen before the skb is queued, to avoid the skb to be used after free and potentially the sk to drop its last refcount.. |
| CVE-2021-46972 | In the Linux kernel, the following vulnerability has been resolved: ovl: fix leaked dentry Since commit 6815f479ca90 ("ovl: use only uppermetacopy state in ovl_lookup()"), overlayfs doesn't put temporary dentry when there is a metacopy error, which leads to dentry leaks when shutting down the related superblock: overlayfs: refusing to follow metacopy origin for (/file0) ... BUG: Dentry (____ptrval____){i=3f33,n=file3} still in use (1) [unmount of overlay overlay] ... WARNING: CPU: 1 PID: 432 at umount_check.cold+0x107/0x14d CPU: 1 PID: 432 Comm: unmount-overlay Not tainted 5.12.0-rc5 #1 ... RIP: 0010:umount_check.cold+0x107/0x14d ... Call Trace: d_walk+0x28c/0x950 ? dentry_lru_isolate+0x2b0/0x2b0 ? __kasan_slab_free+0x12/0x20 do_one_tree+0x33/0x60 shrink_dcache_for_umount+0x78/0x1d0 generic_shutdown_super+0x70/0x440 kill_anon_super+0x3e/0x70 deactivate_locked_super+0xc4/0x160 deactivate_super+0xfa/0x140 cleanup_mnt+0x22e/0x370 __cleanup_mnt+0x1a/0x30 task_work_run+0x139/0x210 do_exit+0xb0c/0x2820 ? __kasan_check_read+0x1d/0x30 ? find_held_lock+0x35/0x160 ? lock_release+0x1b6/0x660 ? mm_update_next_owner+0xa20/0xa20 ? reacquire_held_locks+0x3f0/0x3f0 ? __sanitizer_cov_trace_const_cmp4+0x22/0x30 do_group_exit+0x135/0x380 __do_sys_exit_group.isra.0+0x20/0x20 __x64_sys_exit_group+0x3c/0x50 do_syscall_64+0x45/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae ... VFS: Busy inodes after unmount of overlay. Self-destruct in 5 seconds. Have a nice day... This fix has been tested with a syzkaller reproducer. |
| CVE-2021-46971 | In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix unconditional security_locked_down() call Currently, the lockdown state is queried unconditionally, even though its result is used only if the PERF_SAMPLE_REGS_INTR bit is set in attr.sample_type. While that doesn't matter in case of the Lockdown LSM, it causes trouble with the SELinux's lockdown hook implementation. SELinux implements the locked_down hook with a check whether the current task's type has the corresponding "lockdown" class permission ("integrity" or "confidentiality") allowed in the policy. This means that calling the hook when the access control decision would be ignored generates a bogus permission check and audit record. Fix this by checking sample_type first and only calling the hook when its result would be honored. |
| CVE-2021-46970 | In the Linux kernel, the following vulnerability has been resolved: bus: mhi: pci_generic: Remove WQ_MEM_RECLAIM flag from state workqueue A recent change created a dedicated workqueue for the state-change work with WQ_HIGHPRI (no strong reason for that) and WQ_MEM_RECLAIM flags, but the state-change work (mhi_pm_st_worker) does not guarantee forward progress under memory pressure, and will even wait on various memory allocations when e.g. creating devices, loading firmware, etc... The work is then not part of a memory reclaim path... Moreover, this causes a warning in check_flush_dependency() since we end up in code that flushes a non-reclaim workqueue: [ 40.969601] workqueue: WQ_MEM_RECLAIM mhi_hiprio_wq:mhi_pm_st_worker [mhi] is flushing !WQ_MEM_RECLAIM events_highpri:flush_backlog [ 40.969612] WARNING: CPU: 4 PID: 158 at kernel/workqueue.c:2607 check_flush_dependency+0x11c/0x140 [ 40.969733] Call Trace: [ 40.969740] __flush_work+0x97/0x1d0 [ 40.969745] ? wake_up_process+0x15/0x20 [ 40.969749] ? insert_work+0x70/0x80 [ 40.969750] ? __queue_work+0x14a/0x3e0 [ 40.969753] flush_work+0x10/0x20 [ 40.969756] rollback_registered_many+0x1c9/0x510 [ 40.969759] unregister_netdevice_queue+0x94/0x120 [ 40.969761] unregister_netdev+0x1d/0x30 [ 40.969765] mhi_net_remove+0x1a/0x40 [mhi_net] [ 40.969770] mhi_driver_remove+0x124/0x250 [mhi] [ 40.969776] device_release_driver_internal+0xf0/0x1d0 [ 40.969778] device_release_driver+0x12/0x20 [ 40.969782] bus_remove_device+0xe1/0x150 [ 40.969786] device_del+0x17b/0x3e0 [ 40.969791] mhi_destroy_device+0x9a/0x100 [mhi] [ 40.969796] ? mhi_unmap_single_use_bb+0x50/0x50 [mhi] [ 40.969799] device_for_each_child+0x5e/0xa0 [ 40.969804] mhi_pm_st_worker+0x921/0xf50 [mhi] |
| CVE-2021-46969 | In the Linux kernel, the following vulnerability has been resolved: bus: mhi: core: Fix invalid error returning in mhi_queue mhi_queue returns an error when the doorbell is not accessible in the current state. This can happen when the device is in non M0 state, like M3, and needs to be waken-up prior ringing the DB. This case is managed earlier by triggering an asynchronous M3 exit via controller resume/suspend callbacks, that in turn will cause M0 transition and DB update. So, since it's not an error but just delaying of doorbell update, there is no reason to return an error. This also fixes a use after free error for skb case, indeed a caller queuing skb will try to free the skb if the queueing fails, but in that case queueing has been done. |
| CVE-2021-46968 | In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: fix zcard and zqueue hot-unplug memleak Tests with kvm and a kmemdebug kernel showed, that on hot unplug the zcard and zqueue structs for the unplugged card or queue are not properly freed because of a mismatch with get/put for the embedded kref counter. This fix now adjusts the handling of the kref counters. With init the kref counter starts with 1. This initial value needs to drop to zero with the unregister of the card or queue to trigger the release and free the object. |
| CVE-2021-46967 | In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: fix vm_flags for virtqueue doorbell mapping The virtqueue doorbell is usually implemented via registeres but we don't provide the necessary vma->flags like VM_PFNMAP. This may cause several issues e.g when userspace tries to map the doorbell via vhost IOTLB, kernel may panic due to the page is not backed by page structure. This patch fixes this by setting the necessary vm_flags. With this patch, try to map doorbell via IOTLB will fail with bad address. |
| CVE-2021-46966 | In the Linux kernel, the following vulnerability has been resolved: ACPI: custom_method: fix potential use-after-free issue In cm_write(), buf is always freed when reaching the end of the function. If the requested count is less than table.length, the allocated buffer will be freed but subsequent calls to cm_write() will still try to access it. Remove the unconditional kfree(buf) at the end of the function and set the buf to NULL in the -EINVAL error path to match the rest of function. |
| CVE-2021-46965 | In the Linux kernel, the following vulnerability has been resolved: mtd: physmap: physmap-bt1-rom: Fix unintentional stack access Cast &data to (char *) in order to avoid unintentionally accessing the stack. Notice that data is of type u32, so any increment to &data will be in the order of 4-byte chunks, and this piece of code is actually intended to be a byte offset. Addresses-Coverity-ID: 1497765 ("Out-of-bounds access") |
| CVE-2021-46964 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Reserve extra IRQ vectors Commit a6dcfe08487e ("scsi: qla2xxx: Limit interrupt vectors to number of CPUs") lowers the number of allocated MSI-X vectors to the number of CPUs. That breaks vector allocation assumptions in qla83xx_iospace_config(), qla24xx_enable_msix() and qla2x00_iospace_config(). Either of the functions computes maximum number of qpairs as: ha->max_qpairs = ha->msix_count - 1 (MB interrupt) - 1 (default response queue) - 1 (ATIO, in dual or pure target mode) max_qpairs is set to zero in case of two CPUs and initiator mode. The number is then used to allocate ha->queue_pair_map inside qla2x00_alloc_queues(). No allocation happens and ha->queue_pair_map is left NULL but the driver thinks there are queue pairs available. qla2xxx_queuecommand() tries to find a qpair in the map and crashes: if (ha->mqenable) { uint32_t tag; uint16_t hwq; struct qla_qpair *qpair = NULL; tag = blk_mq_unique_tag(cmd->request); hwq = blk_mq_unique_tag_to_hwq(tag); qpair = ha->queue_pair_map[hwq]; # <- HERE if (qpair) return qla2xxx_mqueuecommand(host, cmd, qpair); } BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 72 Comm: kworker/u4:3 Tainted: G W 5.10.0-rc1+ #25 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Workqueue: scsi_wq_7 fc_scsi_scan_rport [scsi_transport_fc] RIP: 0010:qla2xxx_queuecommand+0x16b/0x3f0 [qla2xxx] Call Trace: scsi_queue_rq+0x58c/0xa60 blk_mq_dispatch_rq_list+0x2b7/0x6f0 ? __sbitmap_get_word+0x2a/0x80 __blk_mq_sched_dispatch_requests+0xb8/0x170 blk_mq_sched_dispatch_requests+0x2b/0x50 __blk_mq_run_hw_queue+0x49/0xb0 __blk_mq_delay_run_hw_queue+0xfb/0x150 blk_mq_sched_insert_request+0xbe/0x110 blk_execute_rq+0x45/0x70 __scsi_execute+0x10e/0x250 scsi_probe_and_add_lun+0x228/0xda0 __scsi_scan_target+0xf4/0x620 ? __pm_runtime_resume+0x4f/0x70 scsi_scan_target+0x100/0x110 fc_scsi_scan_rport+0xa1/0xb0 [scsi_transport_fc] process_one_work+0x1ea/0x3b0 worker_thread+0x28/0x3b0 ? process_one_work+0x3b0/0x3b0 kthread+0x112/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 The driver should allocate enough vectors to provide every CPU it's own HW queue and still handle reserved (MB, RSP, ATIO) interrupts. The change fixes the crash on dual core VM and prevents unbalanced QP allocation where nr_hw_queues is two less than the number of CPUs. |
| CVE-2021-46963 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix crash in qla2xxx_mqueuecommand() RIP: 0010:kmem_cache_free+0xfa/0x1b0 Call Trace: qla2xxx_mqueuecommand+0x2b5/0x2c0 [qla2xxx] scsi_queue_rq+0x5e2/0xa40 __blk_mq_try_issue_directly+0x128/0x1d0 blk_mq_request_issue_directly+0x4e/0xb0 Fix incorrect call to free srb in qla2xxx_mqueuecommand(), as srb is now allocated by upper layers. This fixes smatch warning of srb unintended free. |
| CVE-2021-46962 | In the Linux kernel, the following vulnerability has been resolved: mmc: uniphier-sd: Fix a resource leak in the remove function A 'tmio_mmc_host_free()' call is missing in the remove function, in order to balance a 'tmio_mmc_host_alloc()' call in the probe. This is done in the error handling path of the probe, but not in the remove function. Add the missing call. |
| CVE-2021-46961 | In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3: Do not enable irqs when handling spurious interrups We triggered the following error while running our 4.19 kernel with the pseudo-NMI patches backported to it: [ 14.816231] ------------[ cut here ]------------ [ 14.816231] kernel BUG at irq.c:99! [ 14.816232] Internal error: Oops - BUG: 0 [#1] SMP [ 14.816232] Process swapper/0 (pid: 0, stack limit = 0x(____ptrval____)) [ 14.816233] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.19.95.aarch64 #14 [ 14.816233] Hardware name: evb (DT) [ 14.816234] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 14.816234] pc : asm_nmi_enter+0x94/0x98 [ 14.816235] lr : asm_nmi_enter+0x18/0x98 [ 14.816235] sp : ffff000008003c50 [ 14.816235] pmr_save: 00000070 [ 14.816237] x29: ffff000008003c50 x28: ffff0000095f56c0 [ 14.816238] x27: 0000000000000000 x26: ffff000008004000 [ 14.816239] x25: 00000000015e0000 x24: ffff8008fb916000 [ 14.816240] x23: 0000000020400005 x22: ffff0000080817cc [ 14.816241] x21: ffff000008003da0 x20: 0000000000000060 [ 14.816242] x19: 00000000000003ff x18: ffffffffffffffff [ 14.816243] x17: 0000000000000008 x16: 003d090000000000 [ 14.816244] x15: ffff0000095ea6c8 x14: ffff8008fff5ab40 [ 14.816244] x13: ffff8008fff58b9d x12: 0000000000000000 [ 14.816245] x11: ffff000008c8a200 x10: 000000008e31fca5 [ 14.816246] x9 : ffff000008c8a208 x8 : 000000000000000f [ 14.816247] x7 : 0000000000000004 x6 : ffff8008fff58b9e [ 14.816248] x5 : 0000000000000000 x4 : 0000000080000000 [ 14.816249] x3 : 0000000000000000 x2 : 0000000080000000 [ 14.816250] x1 : 0000000000120000 x0 : ffff0000095f56c0 [ 14.816251] Call trace: [ 14.816251] asm_nmi_enter+0x94/0x98 [ 14.816251] el1_irq+0x8c/0x180 (IRQ C) [ 14.816252] gic_handle_irq+0xbc/0x2e4 [ 14.816252] el1_irq+0xcc/0x180 (IRQ B) [ 14.816253] arch_timer_handler_virt+0x38/0x58 [ 14.816253] handle_percpu_devid_irq+0x90/0x240 [ 14.816253] generic_handle_irq+0x34/0x50 [ 14.816254] __handle_domain_irq+0x68/0xc0 [ 14.816254] gic_handle_irq+0xf8/0x2e4 [ 14.816255] el1_irq+0xcc/0x180 (IRQ A) [ 14.816255] arch_cpu_idle+0x34/0x1c8 [ 14.816255] default_idle_call+0x24/0x44 [ 14.816256] do_idle+0x1d0/0x2c8 [ 14.816256] cpu_startup_entry+0x28/0x30 [ 14.816256] rest_init+0xb8/0xc8 [ 14.816257] start_kernel+0x4c8/0x4f4 [ 14.816257] Code: 940587f1 d5384100 b9401001 36a7fd01 (d4210000) [ 14.816258] Modules linked in: start_dp(O) smeth(O) [ 15.103092] ---[ end trace 701753956cb14aa8 ]--- [ 15.103093] Kernel panic - not syncing: Fatal exception in interrupt [ 15.103099] SMP: stopping secondary CPUs [ 15.103100] Kernel Offset: disabled [ 15.103100] CPU features: 0x36,a2400218 [ 15.103100] Memory Limit: none which is cause by a 'BUG_ON(in_nmi())' in nmi_enter(). From the call trace, we can find three interrupts (noted A, B, C above): interrupt (A) is preempted by (B), which is further interrupted by (C). Subsequent investigations show that (B) results in nmi_enter() being called, but that it actually is a spurious interrupt. Furthermore, interrupts are reenabled in the context of (B), and (C) fires with NMI priority. We end-up with a nested NMI situation, something we definitely do not want to (and cannot) handle. The bug here is that spurious interrupts should never result in any state change, and we should just return to the interrupted context. Moving the handling of spurious interrupts as early as possible in the GICv3 handler fixes this issue. [maz: rewrote commit message, corrected Fixes: tag] |
| CVE-2021-46960 | In the Linux kernel, the following vulnerability has been resolved: cifs: Return correct error code from smb2_get_enc_key Avoid a warning if the error percolates back up: [440700.376476] CIFS VFS: \\otters.example.com crypt_message: Could not get encryption key [440700.386947] ------------[ cut here ]------------ [440700.386948] err = 1 [440700.386977] WARNING: CPU: 11 PID: 2733 at /build/linux-hwe-5.4-p6lk6L/linux-hwe-5.4-5.4.0/lib/errseq.c:74 errseq_set+0x5c/0x70 ... [440700.397304] CPU: 11 PID: 2733 Comm: tar Tainted: G OE 5.4.0-70-generic #78~18.04.1-Ubuntu ... [440700.397334] Call Trace: [440700.397346] __filemap_set_wb_err+0x1a/0x70 [440700.397419] cifs_writepages+0x9c7/0xb30 [cifs] [440700.397426] do_writepages+0x4b/0xe0 [440700.397444] __filemap_fdatawrite_range+0xcb/0x100 [440700.397455] filemap_write_and_wait+0x42/0xa0 [440700.397486] cifs_setattr+0x68b/0xf30 [cifs] [440700.397493] notify_change+0x358/0x4a0 [440700.397500] utimes_common+0xe9/0x1c0 [440700.397510] do_utimes+0xc5/0x150 [440700.397520] __x64_sys_utimensat+0x88/0xd0 |
| CVE-2021-46959 | In the Linux kernel, the following vulnerability has been resolved: spi: Fix use-after-free with devm_spi_alloc_* We can't rely on the contents of the devres list during spi_unregister_controller(), as the list is already torn down at the time we perform devres_find() for devm_spi_release_controller. This causes devices registered with devm_spi_alloc_{master,slave}() to be mistakenly identified as legacy, non-devm managed devices and have their reference counters decremented below 0. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174 [<b0396f04>] (refcount_warn_saturate) from [<b03c56a4>] (kobject_put+0x90/0x98) [<b03c5614>] (kobject_put) from [<b0447b4c>] (put_device+0x20/0x24) r4:b6700140 [<b0447b2c>] (put_device) from [<b07515e8>] (devm_spi_release_controller+0x3c/0x40) [<b07515ac>] (devm_spi_release_controller) from [<b045343c>] (release_nodes+0x84/0xc4) r5:b6700180 r4:b6700100 [<b04533b8>] (release_nodes) from [<b0454160>] (devres_release_all+0x5c/0x60) r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10 [<b0454104>] (devres_release_all) from [<b044e41c>] (__device_release_driver+0x144/0x1ec) r5:b117ad94 r4:b163dc10 [<b044e2d8>] (__device_release_driver) from [<b044f70c>] (device_driver_detach+0x84/0xa0) r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10 [<b044f688>] (device_driver_detach) from [<b044d274>] (unbind_store+0xe4/0xf8) Instead, determine the devm allocation state as a flag on the controller which is guaranteed to be stable during cleanup. |
| CVE-2021-46958 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between transaction aborts and fsyncs leading to use-after-free There is a race between a task aborting a transaction during a commit, a task doing an fsync and the transaction kthread, which leads to an use-after-free of the log root tree. When this happens, it results in a stack trace like the following: BTRFS info (device dm-0): forced readonly BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS: error (device dm-0) in cleanup_transaction:1958: errno=-5 IO failure BTRFS warning (device dm-0): lost page write due to IO error on /dev/mapper/error-test (-5) BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0xa4e8 len 4096 err no 10 BTRFS error (device dm-0): error writing primary super block to device 1 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e000 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e008 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e010 len 4096 err no 10 BTRFS: error (device dm-0) in write_all_supers:4110: errno=-5 IO failure (1 errors while writing supers) BTRFS: error (device dm-0) in btrfs_sync_log:3308: errno=-5 IO failure general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b68: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 2458471 Comm: fsstress Not tainted 5.12.0-rc5-btrfs-next-84 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x139/0xa40 Code: c0 74 19 (...) RSP: 0018:ffff9f18830d7b00 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b68 RBX: 0000000000000001 RCX: 0000000000000002 RDX: ffffffffb9c54d13 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff9f18830d7bc0 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9f18830d7be0 R11: 0000000000000001 R12: ffff8c6cd199c040 R13: ffff8c6c95821358 R14: 00000000fffffffb R15: ffff8c6cbcf01358 FS: 00007fa9140c2b80(0000) GS:ffff8c6fac600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa913d52000 CR3: 000000013d2b4003 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __btrfs_handle_fs_error+0xde/0x146 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_file+0x40c/0x580 [btrfs] do_fsync+0x38/0x70 __x64_sys_fsync+0x10/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fa9142a55c3 Code: 8b 15 09 (...) RSP: 002b:00007fff26278d48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 0000563c83cb4560 RCX: 00007fa9142a55c3 RDX: 00007fff26278cb0 RSI: 00007fff26278cb0 RDI: 0000000000000005 RBP: 0000000000000005 R08: 0000000000000001 R09: 00007fff26278d5c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000340 R13: 00007fff26278de0 R14: 00007fff26278d96 R15: 0000563c83ca57c0 Modules linked in: btrfs dm_zero dm_snapshot dm_thin_pool (...) ---[ end trace ee2f1b19327d791d ]--- The steps that lead to this crash are the following: 1) We are at transaction N; 2) We have two tasks with a transaction handle attached to transaction N. Task A and Task B. Task B is doing an fsync; 3) Task B is at btrfs_sync_log(), and has saved fs_info->log_root_tree into a local variable named 'log_root_tree' at the top of btrfs_sync_log(). Task B is about to call write_all_supers(), but before that... 4) Task A calls btrfs_commit_transaction(), and after it sets the transaction state to TRANS_STATE_COMMIT_START, an error happens before it w ---truncated--- |
| CVE-2021-46957 | In the Linux kernel, the following vulnerability has been resolved: riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe The execution of sys_read end up hitting a BUG_ON() in __find_get_block after installing kprobe at sys_read, the BUG message like the following: [ 65.708663] ------------[ cut here ]------------ [ 65.709987] kernel BUG at fs/buffer.c:1251! [ 65.711283] Kernel BUG [#1] [ 65.712032] Modules linked in: [ 65.712925] CPU: 0 PID: 51 Comm: sh Not tainted 5.12.0-rc4 #1 [ 65.714407] Hardware name: riscv-virtio,qemu (DT) [ 65.715696] epc : __find_get_block+0x218/0x2c8 [ 65.716835] ra : __getblk_gfp+0x1c/0x4a [ 65.717831] epc : ffffffe00019f11e ra : ffffffe00019f56a sp : ffffffe002437930 [ 65.719553] gp : ffffffe000f06030 tp : ffffffe0015abc00 t0 : ffffffe00191e038 [ 65.721290] t1 : ffffffe00191e038 t2 : 000000000000000a s0 : ffffffe002437960 [ 65.723051] s1 : ffffffe00160ad00 a0 : ffffffe00160ad00 a1 : 000000000000012a [ 65.724772] a2 : 0000000000000400 a3 : 0000000000000008 a4 : 0000000000000040 [ 65.726545] a5 : 0000000000000000 a6 : ffffffe00191e000 a7 : 0000000000000000 [ 65.728308] s2 : 000000000000012a s3 : 0000000000000400 s4 : 0000000000000008 [ 65.730049] s5 : 000000000000006c s6 : ffffffe00240f800 s7 : ffffffe000f080a8 [ 65.731802] s8 : 0000000000000001 s9 : 000000000000012a s10: 0000000000000008 [ 65.733516] s11: 0000000000000008 t3 : 00000000000003ff t4 : 000000000000000f [ 65.734434] t5 : 00000000000003ff t6 : 0000000000040000 [ 65.734613] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 65.734901] Call Trace: [ 65.735076] [<ffffffe00019f11e>] __find_get_block+0x218/0x2c8 [ 65.735417] [<ffffffe00020017a>] __ext4_get_inode_loc+0xb2/0x2f6 [ 65.735618] [<ffffffe000201b6c>] ext4_get_inode_loc+0x3a/0x8a [ 65.735802] [<ffffffe000203380>] ext4_reserve_inode_write+0x2e/0x8c [ 65.735999] [<ffffffe00020357a>] __ext4_mark_inode_dirty+0x4c/0x18e [ 65.736208] [<ffffffe000206bb0>] ext4_dirty_inode+0x46/0x66 [ 65.736387] [<ffffffe000192914>] __mark_inode_dirty+0x12c/0x3da [ 65.736576] [<ffffffe000180dd2>] touch_atime+0x146/0x150 [ 65.736748] [<ffffffe00010d762>] filemap_read+0x234/0x246 [ 65.736920] [<ffffffe00010d834>] generic_file_read_iter+0xc0/0x114 [ 65.737114] [<ffffffe0001f5d7a>] ext4_file_read_iter+0x42/0xea [ 65.737310] [<ffffffe000163f2c>] new_sync_read+0xe2/0x15a [ 65.737483] [<ffffffe000165814>] vfs_read+0xca/0xf2 [ 65.737641] [<ffffffe000165bae>] ksys_read+0x5e/0xc8 [ 65.737816] [<ffffffe000165c26>] sys_read+0xe/0x16 [ 65.737973] [<ffffffe000003972>] ret_from_syscall+0x0/0x2 [ 65.738858] ---[ end trace fe93f985456c935d ]--- A simple reproducer looks like: echo 'p:myprobe sys_read fd=%a0 buf=%a1 count=%a2' > /sys/kernel/debug/tracing/kprobe_events echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable cat /sys/kernel/debug/tracing/trace Here's what happens to hit that BUG_ON(): 1) After installing kprobe at entry of sys_read, the first instruction is replaced by 'ebreak' instruction on riscv64 platform. 2) Once kernel reach the 'ebreak' instruction at the entry of sys_read, it trap into the riscv breakpoint handler, where it do something to setup for coming single-step of origin instruction, including backup the 'sstatus' in pt_regs, followed by disable interrupt during single stepping via clear 'SIE' bit of 'sstatus' in pt_regs. 3) Then kernel restore to the instruction slot contains two instructions, one is original instruction at entry of sys_read, the other is 'ebreak'. Here it trigger a 'Instruction page fault' exception (value at 'scause' is '0xc'), if PF is not filled into PageTabe for that slot yet. 4) Again kernel trap into page fault exception handler, where it choose different policy according to the state of running kprobe. Because afte 2) the state is KPROBE_HIT_SS, so kernel reset the current kp ---truncated--- |
| CVE-2021-46956 | In the Linux kernel, the following vulnerability has been resolved: virtiofs: fix memory leak in virtio_fs_probe() When accidentally passing twice the same tag to qemu, kmemleak ended up reporting a memory leak in virtiofs. Also, looking at the log I saw the following error (that's when I realised the duplicated tag): virtiofs: probe of virtio5 failed with error -17 Here's the kmemleak log for reference: unreferenced object 0xffff888103d47800 (size 1024): comm "systemd-udevd", pid 118, jiffies 4294893780 (age 18.340s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 80 90 02 a0 ff ff ff ff ................ backtrace: [<000000000ebb87c1>] virtio_fs_probe+0x171/0x7ae [virtiofs] [<00000000f8aca419>] virtio_dev_probe+0x15f/0x210 [<000000004d6baf3c>] really_probe+0xea/0x430 [<00000000a6ceeac8>] device_driver_attach+0xa8/0xb0 [<00000000196f47a7>] __driver_attach+0x98/0x140 [<000000000b20601d>] bus_for_each_dev+0x7b/0xc0 [<00000000399c7b7f>] bus_add_driver+0x11b/0x1f0 [<0000000032b09ba7>] driver_register+0x8f/0xe0 [<00000000cdd55998>] 0xffffffffa002c013 [<000000000ea196a2>] do_one_initcall+0x64/0x2e0 [<0000000008f727ce>] do_init_module+0x5c/0x260 [<000000003cdedab6>] __do_sys_finit_module+0xb5/0x120 [<00000000ad2f48c6>] do_syscall_64+0x33/0x40 [<00000000809526b5>] entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-46955 | In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix stack OOB read while fragmenting IPv4 packets running openvswitch on kernels built with KASAN, it's possible to see the following splat while testing fragmentation of IPv4 packets: BUG: KASAN: stack-out-of-bounds in ip_do_fragment+0x1b03/0x1f60 Read of size 1 at addr ffff888112fc713c by task handler2/1367 CPU: 0 PID: 1367 Comm: handler2 Not tainted 5.12.0-rc6+ #418 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x92/0xc1 print_address_description.constprop.7+0x1a/0x150 kasan_report.cold.13+0x7f/0x111 ip_do_fragment+0x1b03/0x1f60 ovs_fragment+0x5bf/0x840 [openvswitch] do_execute_actions+0x1bd5/0x2400 [openvswitch] ovs_execute_actions+0xc8/0x3d0 [openvswitch] ovs_packet_cmd_execute+0xa39/0x1150 [openvswitch] genl_family_rcv_msg_doit.isra.15+0x227/0x2d0 genl_rcv_msg+0x287/0x490 netlink_rcv_skb+0x120/0x380 genl_rcv+0x24/0x40 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f957079db07 Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 eb ec ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 24 ed ff ff 48 RSP: 002b:00007f956ce35a50 EFLAGS: 00000293 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007f957079db07 RDX: 0000000000000000 RSI: 00007f956ce35ae0 RDI: 0000000000000019 RBP: 00007f956ce35ae0 R08: 0000000000000000 R09: 00007f9558006730 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00007f956ce37308 R14: 00007f956ce35f80 R15: 00007f956ce35ae0 The buggy address belongs to the page: page:00000000af2a1d93 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x112fc7 flags: 0x17ffffc0000000() raw: 0017ffffc0000000 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected addr ffff888112fc713c is located in stack of task handler2/1367 at offset 180 in frame: ovs_fragment+0x0/0x840 [openvswitch] this frame has 2 objects: [32, 144) 'ovs_dst' [192, 424) 'ovs_rt' Memory state around the buggy address: ffff888112fc7000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888112fc7080: 00 f1 f1 f1 f1 00 00 00 00 00 00 00 00 00 00 00 >ffff888112fc7100: 00 00 00 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 ^ ffff888112fc7180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888112fc7200: 00 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00 for IPv4 packets, ovs_fragment() uses a temporary struct dst_entry. Then, in the following call graph: ip_do_fragment() ip_skb_dst_mtu() ip_dst_mtu_maybe_forward() ip_mtu_locked() the pointer to struct dst_entry is used as pointer to struct rtable: this turns the access to struct members like rt_mtu_locked into an OOB read in the stack. Fix this changing the temporary variable used for IPv4 packets in ovs_fragment(), similarly to what is done for IPv6 few lines below. |
| CVE-2021-46954 | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_frag: fix stack OOB read while fragmenting IPv4 packets when 'act_mirred' tries to fragment IPv4 packets that had been previously re-assembled using 'act_ct', splats like the following can be observed on kernels built with KASAN: BUG: KASAN: stack-out-of-bounds in ip_do_fragment+0x1b03/0x1f60 Read of size 1 at addr ffff888147009574 by task ping/947 CPU: 0 PID: 947 Comm: ping Not tainted 5.12.0-rc6+ #418 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: <IRQ> dump_stack+0x92/0xc1 print_address_description.constprop.7+0x1a/0x150 kasan_report.cold.13+0x7f/0x111 ip_do_fragment+0x1b03/0x1f60 sch_fragment+0x4bf/0xe40 tcf_mirred_act+0xc3d/0x11a0 [act_mirred] tcf_action_exec+0x104/0x3e0 fl_classify+0x49a/0x5e0 [cls_flower] tcf_classify_ingress+0x18a/0x820 __netif_receive_skb_core+0xae7/0x3340 __netif_receive_skb_one_core+0xb6/0x1b0 process_backlog+0x1ef/0x6c0 __napi_poll+0xaa/0x500 net_rx_action+0x702/0xac0 __do_softirq+0x1e4/0x97f do_softirq+0x71/0x90 </IRQ> __local_bh_enable_ip+0xdb/0xf0 ip_finish_output2+0x760/0x2120 ip_do_fragment+0x15a5/0x1f60 __ip_finish_output+0x4c2/0xea0 ip_output+0x1ca/0x4d0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x1c4b/0x2d00 sock_sendmsg+0xdb/0x110 __sys_sendto+0x1d7/0x2b0 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f82e13853eb Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 75 42 2c 00 41 89 ca 8b 00 85 c0 75 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 41 57 4d 89 c7 41 56 41 89 RSP: 002b:00007ffe01fad888 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00005571aac13700 RCX: 00007f82e13853eb RDX: 0000000000002330 RSI: 00005571aac13700 RDI: 0000000000000003 RBP: 0000000000002330 R08: 00005571aac10500 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe01faefb0 R13: 00007ffe01fad890 R14: 00007ffe01fad980 R15: 00005571aac0f0a0 The buggy address belongs to the page: page:000000001dff2e03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x147009 flags: 0x17ffffc0001000(reserved) raw: 0017ffffc0001000 ffffea00051c0248 ffffea00051c0248 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888147009400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888147009480: f1 f1 f1 f1 04 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 >ffff888147009500: 00 00 00 00 00 00 00 00 00 00 f2 f2 f2 f2 f2 f2 ^ ffff888147009580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888147009600: 00 00 00 00 00 00 00 00 00 00 00 00 00 f2 f2 f2 for IPv4 packets, sch_fragment() uses a temporary struct dst_entry. Then, in the following call graph: ip_do_fragment() ip_skb_dst_mtu() ip_dst_mtu_maybe_forward() ip_mtu_locked() the pointer to struct dst_entry is used as pointer to struct rtable: this turns the access to struct members like rt_mtu_locked into an OOB read in the stack. Fix this changing the temporary variable used for IPv4 packets in sch_fragment(), similarly to what is done for IPv6 few lines below. |
| CVE-2021-46953 | In the Linux kernel, the following vulnerability has been resolved: ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure When failing the driver probe because of invalid firmware properties, the GTDT driver unmaps the interrupt that it mapped earlier. However, it never checks whether the mapping of the interrupt actially succeeded. Even more, should the firmware report an illegal interrupt number that overlaps with the GIC SGI range, this can result in an IPI being unmapped, and subsequent fireworks (as reported by Dann Frazier). Rework the driver to have a slightly saner behaviour and actually check whether the interrupt has been mapped before unmapping things. |
| CVE-2021-46952 | In the Linux kernel, the following vulnerability has been resolved: NFS: fs_context: validate UDP retrans to prevent shift out-of-bounds Fix shift out-of-bounds in xprt_calc_majortimeo(). This is caused by a garbage timeout (retrans) mount option being passed to nfs mount, in this case from syzkaller. If the protocol is XPRT_TRANSPORT_UDP, then 'retrans' is a shift value for a 64-bit long integer, so 'retrans' cannot be >= 64. If it is >= 64, fail the mount and return an error. |
| CVE-2021-46951 | In the Linux kernel, the following vulnerability has been resolved: tpm: efi: Use local variable for calculating final log size When tpm_read_log_efi is called multiple times, which happens when one loads and unloads a TPM2 driver multiple times, then the global variable efi_tpm_final_log_size will at some point become a negative number due to the subtraction of final_events_preboot_size occurring each time. Use a local variable to avoid this integer underflow. The following issue is now resolved: Mar 8 15:35:12 hibinst kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Mar 8 15:35:12 hibinst kernel: Workqueue: tpm-vtpm vtpm_proxy_work [tpm_vtpm_proxy] Mar 8 15:35:12 hibinst kernel: RIP: 0010:__memcpy+0x12/0x20 Mar 8 15:35:12 hibinst kernel: Code: 00 b8 01 00 00 00 85 d2 74 0a c7 05 44 7b ef 00 0f 00 00 00 c3 cc cc cc 66 66 90 66 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 a4 Mar 8 15:35:12 hibinst kernel: RSP: 0018:ffff9ac4c0fcfde0 EFLAGS: 00010206 Mar 8 15:35:12 hibinst kernel: RAX: ffff88f878cefed5 RBX: ffff88f878ce9000 RCX: 1ffffffffffffe0f Mar 8 15:35:12 hibinst kernel: RDX: 0000000000000003 RSI: ffff9ac4c003bff9 RDI: ffff88f878cf0e4d Mar 8 15:35:12 hibinst kernel: RBP: ffff9ac4c003b000 R08: 0000000000001000 R09: 000000007e9d6073 Mar 8 15:35:12 hibinst kernel: R10: ffff9ac4c003b000 R11: ffff88f879ad3500 R12: 0000000000000ed5 Mar 8 15:35:12 hibinst kernel: R13: ffff88f878ce9760 R14: 0000000000000002 R15: ffff88f77de7f018 Mar 8 15:35:12 hibinst kernel: FS: 0000000000000000(0000) GS:ffff88f87bd00000(0000) knlGS:0000000000000000 Mar 8 15:35:12 hibinst kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 8 15:35:12 hibinst kernel: CR2: ffff9ac4c003c000 CR3: 00000001785a6004 CR4: 0000000000060ee0 Mar 8 15:35:12 hibinst kernel: Call Trace: Mar 8 15:35:12 hibinst kernel: tpm_read_log_efi+0x152/0x1a7 Mar 8 15:35:12 hibinst kernel: tpm_bios_log_setup+0xc8/0x1c0 Mar 8 15:35:12 hibinst kernel: tpm_chip_register+0x8f/0x260 Mar 8 15:35:12 hibinst kernel: vtpm_proxy_work+0x16/0x60 [tpm_vtpm_proxy] Mar 8 15:35:12 hibinst kernel: process_one_work+0x1b4/0x370 Mar 8 15:35:12 hibinst kernel: worker_thread+0x53/0x3e0 Mar 8 15:35:12 hibinst kernel: ? process_one_work+0x370/0x370 |
| CVE-2021-46950 | In the Linux kernel, the following vulnerability has been resolved: md/raid1: properly indicate failure when ending a failed write request This patch addresses a data corruption bug in raid1 arrays using bitmaps. Without this fix, the bitmap bits for the failed I/O end up being cleared. Since we are in the failure leg of raid1_end_write_request, the request either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded). |
| CVE-2021-46949 | In the Linux kernel, the following vulnerability has been resolved: sfc: farch: fix TX queue lookup in TX flush done handling We're starting from a TXQ instance number ('qid'), not a TXQ type, so efx_get_tx_queue() is inappropriate (and could return NULL, leading to panics). |
| CVE-2021-46948 | In the Linux kernel, the following vulnerability has been resolved: sfc: farch: fix TX queue lookup in TX event handling We're starting from a TXQ label, not a TXQ type, so efx_channel_get_tx_queue() is inappropriate (and could return NULL, leading to panics). |
| CVE-2021-46947 | In the Linux kernel, the following vulnerability has been resolved: sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues efx->xdp_tx_queue_count is initially initialized to num_possible_cpus() and is later used to allocate and traverse efx->xdp_tx_queues lookup array. However, we may end up not initializing all the array slots with real queues during probing. This results, for example, in a NULL pointer dereference, when running "# ethtool -S <iface>", similar to below [2570283.664955][T4126959] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [2570283.681283][T4126959] #PF: supervisor read access in kernel mode [2570283.695678][T4126959] #PF: error_code(0x0000) - not-present page [2570283.710013][T4126959] PGD 0 P4D 0 [2570283.721649][T4126959] Oops: 0000 [#1] SMP PTI [2570283.734108][T4126959] CPU: 23 PID: 4126959 Comm: ethtool Tainted: G O 5.10.20-cloudflare-2021.3.1 #1 [2570283.752641][T4126959] Hardware name: <redacted> [2570283.781408][T4126959] RIP: 0010:efx_ethtool_get_stats+0x2ca/0x330 [sfc] [2570283.796073][T4126959] Code: 00 85 c0 74 39 48 8b 95 a8 0f 00 00 48 85 d2 74 2d 31 c0 eb 07 48 8b 95 a8 0f 00 00 48 63 c8 49 83 c4 08 83 c0 01 48 8b 14 ca <48> 8b 92 f8 00 00 00 49 89 54 24 f8 39 85 a0 0f 00 00 77 d7 48 8b [2570283.831259][T4126959] RSP: 0018:ffffb79a77657ce8 EFLAGS: 00010202 [2570283.845121][T4126959] RAX: 0000000000000019 RBX: ffffb799cd0c9280 RCX: 0000000000000018 [2570283.860872][T4126959] RDX: 0000000000000000 RSI: ffff96dd970ce000 RDI: 0000000000000005 [2570283.876525][T4126959] RBP: ffff96dd86f0a000 R08: ffff96dd970ce480 R09: 000000000000005f [2570283.892014][T4126959] R10: ffffb799cd0c9fff R11: ffffb799cd0c9000 R12: ffffb799cd0c94f8 [2570283.907406][T4126959] R13: ffffffffc11b1090 R14: ffff96dd970ce000 R15: ffffffffc11cd66c [2570283.922705][T4126959] FS: 00007fa7723f8740(0000) GS:ffff96f51fac0000(0000) knlGS:0000000000000000 [2570283.938848][T4126959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2570283.952524][T4126959] CR2: 00000000000000f8 CR3: 0000001a73e6e006 CR4: 00000000007706e0 [2570283.967529][T4126959] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [2570283.982400][T4126959] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [2570283.997308][T4126959] PKRU: 55555554 [2570284.007649][T4126959] Call Trace: [2570284.017598][T4126959] dev_ethtool+0x1832/0x2830 Fix this by adjusting efx->xdp_tx_queue_count after probing to reflect the true value of initialized slots in efx->xdp_tx_queues. |
| CVE-2021-46945 | In the Linux kernel, the following vulnerability has been resolved: ext4: always panic when errors=panic is specified Before commit 014c9caa29d3 ("ext4: make ext4_abort() use __ext4_error()"), the following series of commands would trigger a panic: 1. mount /dev/sda -o ro,errors=panic test 2. mount /dev/sda -o remount,abort test After commit 014c9caa29d3, remounting a file system using the test mount option "abort" will no longer trigger a panic. This commit will restore the behaviour immediately before commit 014c9caa29d3. (However, note that the Linux kernel's behavior has not been consistent; some previous kernel versions, including 5.4 and 4.19 similarly did not panic after using the mount option "abort".) This also makes a change to long-standing behaviour; namely, the following series commands will now cause a panic, when previously it did not: 1. mount /dev/sda -o ro,errors=panic test 2. echo test > /sys/fs/ext4/sda/trigger_fs_error However, this makes ext4's behaviour much more consistent, so this is a good thing. |
| CVE-2021-46944 | In the Linux kernel, the following vulnerability has been resolved: media: staging/intel-ipu3: Fix memory leak in imu_fmt We are losing the reference to an allocated memory if try. Change the order of the check to avoid that. |
| CVE-2021-46943 | In the Linux kernel, the following vulnerability has been resolved: media: staging/intel-ipu3: Fix set_fmt error handling If there in an error during a set_fmt, do not overwrite the previous sizes with the invalid config. Without this patch, v4l2-compliance ends up allocating 4GiB of RAM and causing the following OOPs [ 38.662975] ipu3-imgu 0000:00:05.0: swiotlb buffer is full (sz: 4096 bytes) [ 38.662980] DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:00:05.0 [ 38.663010] general protection fault: 0000 [#1] PREEMPT SMP |
| CVE-2021-46942 | In the Linux kernel, the following vulnerability has been resolved: io_uring: fix shared sqpoll cancellation hangs [ 736.982891] INFO: task iou-sqp-4294:4295 blocked for more than 122 seconds. [ 736.982897] Call Trace: [ 736.982901] schedule+0x68/0xe0 [ 736.982903] io_uring_cancel_sqpoll+0xdb/0x110 [ 736.982908] io_sqpoll_cancel_cb+0x24/0x30 [ 736.982911] io_run_task_work_head+0x28/0x50 [ 736.982913] io_sq_thread+0x4e3/0x720 We call io_uring_cancel_sqpoll() one by one for each ctx either in sq_thread() itself or via task works, and it's intended to cancel all requests of a specified context. However the function uses per-task counters to track the number of inflight requests, so it counts more requests than available via currect io_uring ctx and goes to sleep for them to appear (e.g. from IRQ), that will never happen. Cancel a bit more than before, i.e. all ctxs that share sqpoll and continue to use shared counters. Don't forget that we should not remove ctx from the list before running that task_work sqpoll-cancel, otherwise the function wouldn't be able to find the context and will hang. |
| CVE-2021-46941 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: Do core softreset when switch mode According to the programming guide, to switch mode for DRD controller, the driver needs to do the following. To switch from device to host: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(host mode) 3. Reset the host with USBCMD.HCRESET 4. Then follow up with the initializing host registers sequence To switch from host to device: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(device mode) 3. Reset the device with DCTL.CSftRst 4. Then follow up with the initializing registers sequence Currently we're missing step 1) to do GCTL.CoreSoftReset and step 3) of switching from host to device. John Stult reported a lockup issue seen with HiKey960 platform without these steps[1]. Similar issue is observed with Ferry's testing platform[2]. So, apply the required steps along with some fixes to Yu Chen's and John Stultz's version. The main fixes to their versions are the missing wait for clocks synchronization before clearing GCTL.CoreSoftReset and only apply DCTL.CSftRst when switching from host to device. [1] https://lore.kernel.org/linux-usb/[email protected]/ [2] https://lore.kernel.org/linux-usb/[email protected]/ |
| CVE-2021-46940 | In the Linux kernel, the following vulnerability has been resolved: tools/power turbostat: Fix offset overflow issue in index converting The idx_to_offset() function returns type int (32-bit signed), but MSR_PKG_ENERGY_STAT is u32 and would be interpreted as a negative number. The end result is that it hits the if (offset < 0) check in update_msr_sum() which prevents the timer callback from updating the stat in the background when long durations are used. The similar issue exists in offset_to_idx() and update_msr_sum(). Fix this issue by converting the 'int' to 'off_t' accordingly. |
| CVE-2021-46939 | In the Linux kernel, the following vulnerability has been resolved: tracing: Restructure trace_clock_global() to never block It was reported that a fix to the ring buffer recursion detection would cause a hung machine when performing suspend / resume testing. The following backtrace was extracted from debugging that case: Call Trace: trace_clock_global+0x91/0xa0 __rb_reserve_next+0x237/0x460 ring_buffer_lock_reserve+0x12a/0x3f0 trace_buffer_lock_reserve+0x10/0x50 __trace_graph_return+0x1f/0x80 trace_graph_return+0xb7/0xf0 ? trace_clock_global+0x91/0xa0 ftrace_return_to_handler+0x8b/0xf0 ? pv_hash+0xa0/0xa0 return_to_handler+0x15/0x30 ? ftrace_graph_caller+0xa0/0xa0 ? trace_clock_global+0x91/0xa0 ? __rb_reserve_next+0x237/0x460 ? ring_buffer_lock_reserve+0x12a/0x3f0 ? trace_event_buffer_lock_reserve+0x3c/0x120 ? trace_event_buffer_reserve+0x6b/0xc0 ? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0 ? dpm_run_callback+0x3b/0xc0 ? pm_ops_is_empty+0x50/0x50 ? platform_get_irq_byname_optional+0x90/0x90 ? trace_device_pm_callback_start+0x82/0xd0 ? dpm_run_callback+0x49/0xc0 With the following RIP: RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200 Since the fix to the recursion detection would allow a single recursion to happen while tracing, this lead to the trace_clock_global() taking a spin lock and then trying to take it again: ring_buffer_lock_reserve() { trace_clock_global() { arch_spin_lock() { queued_spin_lock_slowpath() { /* lock taken */ (something else gets traced by function graph tracer) ring_buffer_lock_reserve() { trace_clock_global() { arch_spin_lock() { queued_spin_lock_slowpath() { /* DEAD LOCK! */ Tracing should *never* block, as it can lead to strange lockups like the above. Restructure the trace_clock_global() code to instead of simply taking a lock to update the recorded "prev_time" simply use it, as two events happening on two different CPUs that calls this at the same time, really doesn't matter which one goes first. Use a trylock to grab the lock for updating the prev_time, and if it fails, simply try again the next time. If it failed to be taken, that means something else is already updating it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761 |
| CVE-2021-46938 | In the Linux kernel, the following vulnerability has been resolved: dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails When loading a device-mapper table for a request-based mapped device, and the allocation/initialization of the blk_mq_tag_set for the device fails, a following device remove will cause a double free. E.g. (dmesg): device-mapper: core: Cannot initialize queue for request-based dm-mq mapped device device-mapper: ioctl: unable to set up device queue for new table. Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0305e098835de000 TEID: 0305e098835de803 Fault in home space mode while using kernel ASCE. AS:000000025efe0007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... lots of modules ... Supported: Yes, External CPU: 0 PID: 7348 Comm: multipathd Kdump: loaded Tainted: G W X 5.3.18-53-default #1 SLE15-SP3 Hardware name: IBM 8561 T01 7I2 (LPAR) Krnl PSW : 0704e00180000000 000000025e368eca (kfree+0x42/0x330) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 000000000000004a 000000025efe5230 c1773200d779968d 0000000000000000 000000025e520270 000000025e8d1b40 0000000000000003 00000007aae10000 000000025e5202a2 0000000000000001 c1773200d779968d 0305e098835de640 00000007a8170000 000003ff80138650 000000025e5202a2 000003e00396faa8 Krnl Code: 000000025e368eb8: c4180041e100 lgrl %r1,25eba50b8 000000025e368ebe: ecba06b93a55 risbg %r11,%r10,6,185,58 #000000025e368ec4: e3b010000008 ag %r11,0(%r1) >000000025e368eca: e310b0080004 lg %r1,8(%r11) 000000025e368ed0: a7110001 tmll %r1,1 000000025e368ed4: a7740129 brc 7,25e369126 000000025e368ed8: e320b0080004 lg %r2,8(%r11) 000000025e368ede: b904001b lgr %r1,%r11 Call Trace: [<000000025e368eca>] kfree+0x42/0x330 [<000000025e5202a2>] blk_mq_free_tag_set+0x72/0xb8 [<000003ff801316a8>] dm_mq_cleanup_mapped_device+0x38/0x50 [dm_mod] [<000003ff80120082>] free_dev+0x52/0xd0 [dm_mod] [<000003ff801233f0>] __dm_destroy+0x150/0x1d0 [dm_mod] [<000003ff8012bb9a>] dev_remove+0x162/0x1c0 [dm_mod] [<000003ff8012a988>] ctl_ioctl+0x198/0x478 [dm_mod] [<000003ff8012ac8a>] dm_ctl_ioctl+0x22/0x38 [dm_mod] [<000000025e3b11ee>] ksys_ioctl+0xbe/0xe0 [<000000025e3b127a>] __s390x_sys_ioctl+0x2a/0x40 [<000000025e8c15ac>] system_call+0xd8/0x2c8 Last Breaking-Event-Address: [<000000025e52029c>] blk_mq_free_tag_set+0x6c/0xb8 Kernel panic - not syncing: Fatal exception: panic_on_oops When allocation/initialization of the blk_mq_tag_set fails in dm_mq_init_request_queue(), it is uninitialized/freed, but the pointer is not reset to NULL; so when dev_remove() later gets into dm_mq_cleanup_mapped_device() it sees the pointer and tries to uninitialize and free it again. Fix this by setting the pointer to NULL in dm_mq_init_request_queue() error-handling. Also set it to NULL in dm_mq_cleanup_mapped_device(). |
| CVE-2021-46937 | In the Linux kernel, the following vulnerability has been resolved: mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()' DAMON debugfs interface increases the reference counts of 'struct pid's for targets from the 'target_ids' file write callback ('dbgfs_target_ids_write()'), but decreases the counts only in DAMON monitoring termination callback ('dbgfs_before_terminate()'). Therefore, when 'target_ids' file is repeatedly written without DAMON monitoring start/termination, the reference count is not decreased and therefore memory for the 'struct pid' cannot be freed. This commit fixes this issue by decreasing the reference counts when 'target_ids' is written. |
| CVE-2021-46936 | In the Linux kernel, the following vulnerability has been resolved: net: fix use-after-free in tw_timer_handler A real world panic issue was found as follow in Linux 5.4. BUG: unable to handle page fault for address: ffffde49a863de28 PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0 RIP: 0010:tw_timer_handler+0x20/0x40 Call Trace: <IRQ> call_timer_fn+0x2b/0x120 run_timer_softirq+0x1ef/0x450 __do_softirq+0x10d/0x2b8 irq_exit+0xc7/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 This issue was also reported since 2017 in the thread [1], unfortunately, the issue was still can be reproduced after fixing DCCP. The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net namespace is destroyed since tcp_sk_ops is registered befrore ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops in the list of pernet_list. There will be a use-after-free on net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net if there are some inflight time-wait timers. This bug is not introduced by commit f2bf415cfed7 ("mib: add net to NET_ADD_STATS_BH") since the net_statistics is a global variable instead of dynamic allocation and freeing. Actually, commit 61a7e26028b9 ("mib: put net statistics on struct net") introduces the bug since it put net statistics on struct net and free it when net namespace is destroyed. Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug and replace pr_crit() with panic() since continuing is meaningless when init_ipv4_mibs() fails. [1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1 |
| CVE-2021-46935 | In the Linux kernel, the following vulnerability has been resolved: binder: fix async_free_space accounting for empty parcels In 4.13, commit 74310e06be4d ("android: binder: Move buffer out of area shared with user space") fixed a kernel structure visibility issue. As part of that patch, sizeof(void *) was used as the buffer size for 0-length data payloads so the driver could detect abusive clients sending 0-length asynchronous transactions to a server by enforcing limits on async_free_size. Unfortunately, on the "free" side, the accounting of async_free_space did not add the sizeof(void *) back. The result was that up to 8-bytes of async_free_space were leaked on every async transaction of 8-bytes or less. These small transactions are uncommon, so this accounting issue has gone undetected for several years. The fix is to use "buffer_size" (the allocated buffer size) instead of "size" (the logical buffer size) when updating the async_free_space during the free operation. These are the same except for this corner case of asynchronous transactions with payloads < 8 bytes. |
| CVE-2021-46934 | In the Linux kernel, the following vulnerability has been resolved: i2c: validate user data in compat ioctl Wrong user data may cause warning in i2c_transfer(), ex: zero msgs. Userspace should not be able to trigger warnings, so this patch adds validation checks for user data in compact ioctl to prevent reported warnings |
| CVE-2021-46933 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear. ffs_data_clear is indirectly called from both ffs_fs_kill_sb and ffs_ep0_release, so it ends up being called twice when userland closes ep0 and then unmounts f_fs. If userland provided an eventfd along with function's USB descriptors, it ends up calling eventfd_ctx_put as many times, causing a refcount underflow. NULL-ify ffs_eventfd to prevent these extraneous eventfd_ctx_put calls. Also, set epfiles to NULL right after de-allocating it, for readability. For completeness, ffs_data_clear actually ends up being called thrice, the last call being before the whole ffs structure gets freed, so when this specific sequence happens there is a second underflow happening (but not being reported): /sys/kernel/debug/tracing# modprobe usb_f_fs /sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter /sys/kernel/debug/tracing# echo function > current_tracer /sys/kernel/debug/tracing# echo 1 > tracing_on (setup gadget, run and kill function userland process, teardown gadget) /sys/kernel/debug/tracing# echo 0 > tracing_on /sys/kernel/debug/tracing# cat trace smartcard-openp-436 [000] ..... 1946.208786: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] ..... 1946.279147: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] .n... 1946.905512: ffs_data_clear <-ffs_data_put Warning output corresponding to above trace: [ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c [ 1946.293094] refcount_t: underflow; use-after-free. [ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E) [ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G C OE 5.15.0-1-rpi #1 Debian 5.15.3-1 [ 1946.417950] Hardware name: BCM2835 [ 1946.425442] Backtrace: [ 1946.432048] [<c08d60a0>] (dump_backtrace) from [<c08d62ec>] (show_stack+0x20/0x24) [ 1946.448226] r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c [ 1946.458412] [<c08d62cc>] (show_stack) from [<c08d9ae0>] (dump_stack+0x28/0x30) [ 1946.470380] [<c08d9ab8>] (dump_stack) from [<c0123500>] (__warn+0xe8/0x154) [ 1946.482067] r5:c04a948c r4:c0a71dc8 [ 1946.490184] [<c0123418>] (__warn) from [<c08d6948>] (warn_slowpath_fmt+0xa0/0xe4) [ 1946.506758] r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04 [ 1946.517070] [<c08d68ac>] (warn_slowpath_fmt) from [<c04a948c>] (refcount_warn_saturate+0x110/0x15c) [ 1946.535309] r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0 [ 1946.546708] [<c04a937c>] (refcount_warn_saturate) from [<c0380134>] (eventfd_ctx_put+0x48/0x74) [ 1946.564476] [<c03800ec>] (eventfd_ctx_put) from [<bf5464e8>] (ffs_data_clear+0xd0/0x118 [usb_f_fs]) [ 1946.582664] r5:c3b84c00 r4:c2695b00 [ 1946.590668] [<bf546418>] (ffs_data_clear [usb_f_fs]) from [<bf547cc0>] (ffs_data_closed+0x9c/0x150 [usb_f_fs]) [ 1946.609608] r5:bf54d014 r4:c2695b00 [ 1946.617522] [<bf547c24>] (ffs_data_closed [usb_f_fs]) from [<bf547da0>] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs]) [ 1946.636217] r7:c0dfcb ---truncated--- |
| CVE-2021-46932 | In the Linux kernel, the following vulnerability has been resolved: Input: appletouch - initialize work before device registration Syzbot has reported warning in __flush_work(). This warning is caused by work->func == NULL, which means missing work initialization. This may happen, since input_dev->close() calls cancel_work_sync(&dev->work), but dev->work initalization happens _after_ input_register_device() call. So this patch moves dev->work initialization before registering input device |
| CVE-2021-46931 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Wrap the tx reporter dump callback to extract the sq Function mlx5e_tx_reporter_dump_sq() casts its void * argument to struct mlx5e_txqsq *, but in TX-timeout-recovery flow the argument is actually of type struct mlx5e_tx_timeout_ctx *. mlx5_core 0000:08:00.1 enp8s0f1: TX timeout detected mlx5_core 0000:08:00.1 enp8s0f1: TX timeout on queue: 1, SQ: 0x11ec, CQ: 0x146d, SQ Cons: 0x0 SQ Prod: 0x1, usecs since last trans: 21565000 BUG: stack guard page was hit at 0000000093f1a2de (stack is 00000000b66ea0dc..000000004d932dae) kernel stack overflow (page fault): 0000 [#1] SMP NOPTI CPU: 5 PID: 95 Comm: kworker/u20:1 Tainted: G W OE 5.13.0_mlnx #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180 [mlx5_core] Call Trace: mlx5e_tx_reporter_dump+0x43/0x1c0 [mlx5_core] devlink_health_do_dump.part.91+0x71/0xd0 devlink_health_report+0x157/0x1b0 mlx5e_reporter_tx_timeout+0xb9/0xf0 [mlx5_core] ? mlx5e_tx_reporter_err_cqe_recover+0x1d0/0x1d0 [mlx5_core] ? mlx5e_health_queue_dump+0xd0/0xd0 [mlx5_core] ? update_load_avg+0x19b/0x550 ? set_next_entity+0x72/0x80 ? pick_next_task_fair+0x227/0x340 ? finish_task_switch+0xa2/0x280 mlx5e_tx_timeout_work+0x83/0xb0 [mlx5_core] process_one_work+0x1de/0x3a0 worker_thread+0x2d/0x3c0 ? process_one_work+0x3a0/0x3a0 kthread+0x115/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 --[ end trace 51ccabea504edaff ]--- RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled end Kernel panic - not syncing: Fatal exception To fix this bug add a wrapper for mlx5e_tx_reporter_dump_sq() which extracts the sq from struct mlx5e_tx_timeout_ctx and set it as the TX-timeout-recovery flow dump callback. |
| CVE-2021-46930 | In the Linux kernel, the following vulnerability has been resolved: usb: mtu3: fix list_head check warning This is caused by uninitialization of list_head. BUG: KASAN: use-after-free in __list_del_entry_valid+0x34/0xe4 Call trace: dump_backtrace+0x0/0x298 show_stack+0x24/0x34 dump_stack+0x130/0x1a8 print_address_description+0x88/0x56c __kasan_report+0x1b8/0x2a0 kasan_report+0x14/0x20 __asan_load8+0x9c/0xa0 __list_del_entry_valid+0x34/0xe4 mtu3_req_complete+0x4c/0x300 [mtu3] mtu3_gadget_stop+0x168/0x448 [mtu3] usb_gadget_unregister_driver+0x204/0x3a0 unregister_gadget_item+0x44/0xa4 |
| CVE-2021-46929 | In the Linux kernel, the following vulnerability has been resolved: sctp: use call_rcu to free endpoint This patch is to delay the endpoint free by calling call_rcu() to fix another use-after-free issue in sctp_sock_dump(): BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20 Call Trace: __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218 lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:334 [inline] __lock_sock+0x203/0x350 net/core/sock.c:2253 lock_sock_nested+0xfe/0x120 net/core/sock.c:2774 lock_sock include/net/sock.h:1492 [inline] sctp_sock_dump+0x122/0xb20 net/sctp/diag.c:324 sctp_for_each_transport+0x2b5/0x370 net/sctp/socket.c:5091 sctp_diag_dump+0x3ac/0x660 net/sctp/diag.c:527 __inet_diag_dump+0xa8/0x140 net/ipv4/inet_diag.c:1049 inet_diag_dump+0x9b/0x110 net/ipv4/inet_diag.c:1065 netlink_dump+0x606/0x1080 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x59a/0x7c0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:216 [inline] inet_diag_handler_cmd+0x2ce/0x3f0 net/ipv4/inet_diag.c:1170 __sock_diag_cmd net/core/sock_diag.c:232 [inline] sock_diag_rcv_msg+0x31d/0x410 net/core/sock_diag.c:263 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2477 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:274 This issue occurs when asoc is peeled off and the old sk is freed after getting it by asoc->base.sk and before calling lock_sock(sk). To prevent the sk free, as a holder of the sk, ep should be alive when calling lock_sock(). This patch uses call_rcu() and moves sock_put and ep free into sctp_endpoint_destroy_rcu(), so that it's safe to try to hold the ep under rcu_read_lock in sctp_transport_traverse_process(). If sctp_endpoint_hold() returns true, it means this ep is still alive and we have held it and can continue to dump it; If it returns false, it means this ep is dead and can be freed after rcu_read_unlock, and we should skip it. In sctp_sock_dump(), after locking the sk, if this ep is different from tsp->asoc->ep, it means during this dumping, this asoc was peeled off before calling lock_sock(), and the sk should be skipped; If this ep is the same with tsp->asoc->ep, it means no peeloff happens on this asoc, and due to lock_sock, no peeloff will happen either until release_sock. Note that delaying endpoint free won't delay the port release, as the port release happens in sctp_endpoint_destroy() before calling call_rcu(). Also, freeing endpoint by call_rcu() makes it safe to access the sk by asoc->base.sk in sctp_assocs_seq_show() and sctp_rcv(). Thanks Jones to bring this issue up. v1->v2: - improve the changelog. - add kfree(ep) into sctp_endpoint_destroy_rcu(), as Jakub noticed. |
| CVE-2021-46928 | In the Linux kernel, the following vulnerability has been resolved: parisc: Clear stale IIR value on instruction access rights trap When a trap 7 (Instruction access rights) occurs, this means the CPU couldn't execute an instruction due to missing execute permissions on the memory region. In this case it seems the CPU didn't even fetched the instruction from memory and thus did not store it in the cr19 (IIR) register before calling the trap handler. So, the trap handler will find some random old stale value in cr19. This patch simply overwrites the stale IIR value with a constant magic "bad food" value (0xbaadf00d), in the hope people don't start to try to understand the various random IIR values in trap 7 dumps. |
| CVE-2021-46927 | In the Linux kernel, the following vulnerability has been resolved: nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert After commit 5b78ed24e8ec ("mm/pagemap: add mmap_assert_locked() annotations to find_vma*()"), the call to get_user_pages() will trigger the mmap assert. static inline void mmap_assert_locked(struct mm_struct *mm) { lockdep_assert_held(&mm->mmap_lock); VM_BUG_ON_MM(!rwsem_is_locked(&mm->mmap_lock), mm); } [ 62.521410] kernel BUG at include/linux/mmap_lock.h:156! ........................................................... [ 62.538938] RIP: 0010:find_vma+0x32/0x80 ........................................................... [ 62.605889] Call Trace: [ 62.608502] <TASK> [ 62.610956] ? lock_timer_base+0x61/0x80 [ 62.614106] find_extend_vma+0x19/0x80 [ 62.617195] __get_user_pages+0x9b/0x6a0 [ 62.620356] __gup_longterm_locked+0x42d/0x450 [ 62.623721] ? finish_wait+0x41/0x80 [ 62.626748] ? __kmalloc+0x178/0x2f0 [ 62.629768] ne_set_user_memory_region_ioctl.isra.0+0x225/0x6a0 [nitro_enclaves] [ 62.635776] ne_enclave_ioctl+0x1cf/0x6d7 [nitro_enclaves] [ 62.639541] __x64_sys_ioctl+0x82/0xb0 [ 62.642620] do_syscall_64+0x3b/0x90 [ 62.645642] entry_SYSCALL_64_after_hwframe+0x44/0xae Use get_user_pages_unlocked() when setting the enclave memory regions. That's a similar pattern as mmap_read_lock() used together with get_user_pages(). |
| CVE-2021-46926 | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: intel-sdw-acpi: harden detection of controller The existing code currently sets a pointer to an ACPI handle before checking that it's actually a SoundWire controller. This can lead to issues where the graph walk continues and eventually fails, but the pointer was set already. This patch changes the logic so that the information provided to the caller is set when a controller is found. |
| CVE-2021-46925 | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix kernel panic caused by race of smc_sock A crash occurs when smc_cdc_tx_handler() tries to access smc_sock but smc_release() has already freed it. [ 4570.695099] BUG: unable to handle page fault for address: 000000002eae9e88 [ 4570.696048] #PF: supervisor write access in kernel mode [ 4570.696728] #PF: error_code(0x0002) - not-present page [ 4570.697401] PGD 0 P4D 0 [ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111 [ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/0 [ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30 <...> [ 4570.711446] Call Trace: [ 4570.711746] <IRQ> [ 4570.711992] smc_cdc_tx_handler+0x41/0xc0 [ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560 [ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10 [ 4570.713489] tasklet_action_common.isra.17+0x66/0x140 [ 4570.714083] __do_softirq+0x123/0x2f4 [ 4570.714521] irq_exit_rcu+0xc4/0xf0 [ 4570.714934] common_interrupt+0xba/0xe0 Though smc_cdc_tx_handler() checked the existence of smc connection, smc_release() may have already dismissed and released the smc socket before smc_cdc_tx_handler() further visits it. smc_cdc_tx_handler() |smc_release() if (!conn) | | |smc_cdc_tx_dismiss_slots() | smc_cdc_tx_dismisser() | |sock_put(&smc->sk) <- last sock_put, | smc_sock freed bh_lock_sock(&smc->sk) (panic) | To make sure we won't receive any CDC messages after we free the smc_sock, add a refcount on the smc_connection for inflight CDC message(posted to the QP but haven't received related CQE), and don't release the smc_connection until all the inflight CDC messages haven been done, for both success or failed ones. Using refcount on CDC messages brings another problem: when the link is going to be destroyed, smcr_link_clear() will reset the QP, which then remove all the pending CQEs related to the QP in the CQ. To make sure all the CQEs will always come back so the refcount on the smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced by smc_ib_modify_qp_error(). And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we need to wait for all pending WQEs done, or we may encounter use-after- free when handling CQEs. For IB device removal routine, we need to wait for all the QPs on that device been destroyed before we can destroy CQs on the device, or the refcount on smc_connection won't reach 0 and smc_sock cannot be released. |
| CVE-2021-46924 | In the Linux kernel, the following vulnerability has been resolved: NFC: st21nfca: Fix memory leak in device probe and remove 'phy->pending_skb' is alloced when device probe, but forgot to free in the error handling path and remove path, this cause memory leak as follows: unreferenced object 0xffff88800bc06800 (size 512): comm "8", pid 11775, jiffies 4295159829 (age 9.032s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d66c09ce>] __kmalloc_node_track_caller+0x1ed/0x450 [<00000000c93382b3>] kmalloc_reserve+0x37/0xd0 [<000000005fea522c>] __alloc_skb+0x124/0x380 [<0000000019f29f9a>] st21nfca_hci_i2c_probe+0x170/0x8f2 Fix it by freeing 'pending_skb' in error and remove. |
| CVE-2021-46923 | In the Linux kernel, the following vulnerability has been resolved: fs/mount_setattr: always cleanup mount_kattr Make sure that finish_mount_kattr() is called after mount_kattr was succesfully built in both the success and failure case to prevent leaking any references we took when we built it. We returned early if path lookup failed thereby risking to leak an additional reference we took when building mount_kattr when an idmapped mount was requested. |
| CVE-2021-46922 | In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix TPM reservation for seal/unseal The original patch 8c657a0590de ("KEYS: trusted: Reserve TPM for seal and unseal operations") was correct on the mailing list: https://lore.kernel.org/linux-integrity/[email protected]/ But somehow got rebased so that the tpm_try_get_ops() in tpm2_seal_trusted() got lost. This causes an imbalanced put of the TPM ops and causes oopses on TIS based hardware. This fix puts back the lost tpm_try_get_ops() |
| CVE-2021-46921 | In the Linux kernel, the following vulnerability has been resolved: locking/qrwlock: Fix ordering in queued_write_lock_slowpath() While this code is executed with the wait_lock held, a reader can acquire the lock without holding wait_lock. The writer side loops checking the value with the atomic_cond_read_acquire(), but only truly acquires the lock when the compare-and-exchange is completed successfully which isn’t ordered. This exposes the window between the acquire and the cmpxchg to an A-B-A problem which allows reads following the lock acquisition to observe values speculatively before the write lock is truly acquired. We've seen a problem in epoll where the reader does a xchg while holding the read lock, but the writer can see a value change out from under it. Writer | Reader -------------------------------------------------------------------------------- ep_scan_ready_list() | |- write_lock_irq() | |- queued_write_lock_slowpath() | |- atomic_cond_read_acquire() | | read_lock_irqsave(&ep->lock, flags); --> (observes value before unlock) | chain_epi_lockless() | | epi->next = xchg(&ep->ovflist, epi); | | read_unlock_irqrestore(&ep->lock, flags); | | | atomic_cmpxchg_relaxed() | |-- READ_ONCE(ep->ovflist); | A core can order the read of the ovflist ahead of the atomic_cmpxchg_relaxed(). Switching the cmpxchg to use acquire semantics addresses this issue at which point the atomic_cond_read can be switched to use relaxed semantics. [peterz: use try_cmpxchg()] |
| CVE-2021-46920 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix clobbering of SWERR overflow bit on writeback Current code blindly writes over the SWERR and the OVERFLOW bits. Write back the bits actually read instead so the driver avoids clobbering the OVERFLOW bit that comes after the register is read. |
| CVE-2021-46919 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix wq size store permission state WQ size can only be changed when the device is disabled. Current code allows change when device is enabled but wq is disabled. Change the check to detect device state. |
| CVE-2021-46918 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: clear MSIX permission entry on shutdown Add disabling/clearing of MSIX permission entries on device shutdown to mirror the enabling of the MSIX entries on probe. Current code left the MSIX enabled and the pasid entries still programmed at device shutdown. |
| CVE-2021-46917 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix wq cleanup of WQCFG registers A pre-release silicon erratum workaround where wq reset does not clear WQCFG registers was leaked into upstream code. Use wq reset command instead of blasting the MMIO region. This also address an issue where we clobber registers in future devices. |
| CVE-2021-46916 | In the Linux kernel, the following vulnerability has been resolved: ixgbe: Fix NULL pointer dereference in ethtool loopback test The ixgbe driver currently generates a NULL pointer dereference when performing the ethtool loopback test. This is due to the fact that there isn't a q_vector associated with the test ring when it is setup as interrupts are not normally added to the test rings. To address this I have added code that will check for a q_vector before returning a napi_id value. If a q_vector is not present it will return a value of 0. |
| CVE-2021-46915 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_limit: avoid possible divide error in nft_limit_init div_u64() divides u64 by u32. nft_limit_init() wants to divide u64 by u64, use the appropriate math function (div64_u64) divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8390 Comm: syz-executor188 Not tainted 5.12.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:div_u64_rem include/linux/math64.h:28 [inline] RIP: 0010:div_u64 include/linux/math64.h:127 [inline] RIP: 0010:nft_limit_init+0x2a2/0x5e0 net/netfilter/nft_limit.c:85 Code: ef 4c 01 eb 41 0f 92 c7 48 89 de e8 38 a5 22 fa 4d 85 ff 0f 85 97 02 00 00 e8 ea 9e 22 fa 4c 0f af f3 45 89 ed 31 d2 4c 89 f0 <49> f7 f5 49 89 c6 e8 d3 9e 22 fa 48 8d 7d 48 48 b8 00 00 00 00 00 RSP: 0018:ffffc90009447198 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000200000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff875152e6 RDI: 0000000000000003 RBP: ffff888020f80908 R08: 0000200000000000 R09: 0000000000000000 R10: ffffffff875152d8 R11: 0000000000000000 R12: ffffc90009447270 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 000000000097a300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c4 CR3: 0000000026a52000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: nf_tables_newexpr net/netfilter/nf_tables_api.c:2675 [inline] nft_expr_init+0x145/0x2d0 net/netfilter/nf_tables_api.c:2713 nft_set_elem_expr_alloc+0x27/0x280 net/netfilter/nf_tables_api.c:5160 nf_tables_newset+0x1997/0x3150 net/netfilter/nf_tables_api.c:4321 nfnetlink_rcv_batch+0x85a/0x21b0 net/netfilter/nfnetlink.c:456 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:580 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:598 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-46914 | In the Linux kernel, the following vulnerability has been resolved: ixgbe: fix unbalanced device enable/disable in suspend/resume pci_disable_device() called in __ixgbe_shutdown() decreases dev->enable_cnt by 1. pci_enable_device_mem() which increases dev->enable_cnt by 1, was removed from ixgbe_resume() in commit 6f82b2558735 ("ixgbe: use generic power management"). This caused unbalanced increase/decrease. So add pci_enable_device_mem() back. Fix the following call trace. ixgbe 0000:17:00.1: disabling already-disabled device Call Trace: __ixgbe_shutdown+0x10a/0x1e0 [ixgbe] ixgbe_suspend+0x32/0x70 [ixgbe] pci_pm_suspend+0x87/0x160 ? pci_pm_freeze+0xd0/0xd0 dpm_run_callback+0x42/0x170 __device_suspend+0x114/0x460 async_suspend+0x1f/0xa0 async_run_entry_fn+0x3c/0xf0 process_one_work+0x1dd/0x410 worker_thread+0x34/0x3f0 ? cancel_delayed_work+0x90/0x90 kthread+0x14c/0x170 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 |
| CVE-2021-46913 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: clone set element expression template memcpy() breaks when using connlimit in set elements. Use nft_expr_clone() to initialize the connlimit expression list, otherwise connlimit garbage collector crashes when walking on the list head copy. [ 493.064656] Workqueue: events_power_efficient nft_rhash_gc [nf_tables] [ 493.064685] RIP: 0010:find_or_evict+0x5a/0x90 [nf_conncount] [ 493.064694] Code: 2b 43 40 83 f8 01 77 0d 48 c7 c0 f5 ff ff ff 44 39 63 3c 75 df 83 6d 18 01 48 8b 43 08 48 89 de 48 8b 13 48 8b 3d ee 2f 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 03 48 83 [ 493.064699] RSP: 0018:ffffc90000417dc0 EFLAGS: 00010297 [ 493.064704] RAX: 0000000000000000 RBX: ffff888134f38410 RCX: 0000000000000000 [ 493.064708] RDX: 0000000000000000 RSI: ffff888134f38410 RDI: ffff888100060cc0 [ 493.064711] RBP: ffff88812ce594a8 R08: ffff888134f38438 R09: 00000000ebb9025c [ 493.064714] R10: ffffffff8219f838 R11: 0000000000000017 R12: 0000000000000001 [ 493.064718] R13: ffffffff82146740 R14: ffff888134f38410 R15: 0000000000000000 [ 493.064721] FS: 0000000000000000(0000) GS:ffff88840e440000(0000) knlGS:0000000000000000 [ 493.064725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 493.064729] CR2: 0000000000000008 CR3: 00000001330aa002 CR4: 00000000001706e0 [ 493.064733] Call Trace: [ 493.064737] nf_conncount_gc_list+0x8f/0x150 [nf_conncount] [ 493.064746] nft_rhash_gc+0x106/0x390 [nf_tables] |
| CVE-2021-46912 | In the Linux kernel, the following vulnerability has been resolved: net: Make tcp_allowed_congestion_control readonly in non-init netns Currently, tcp_allowed_congestion_control is global and writable; writing to it in any net namespace will leak into all other net namespaces. tcp_available_congestion_control and tcp_allowed_congestion_control are the only sysctls in ipv4_net_table (the per-netns sysctl table) with a NULL data pointer; their handlers (proc_tcp_available_congestion_control and proc_allowed_congestion_control) have no other way of referencing a struct net. Thus, they operate globally. Because ipv4_net_table does not use designated initializers, there is no easy way to fix up this one "bad" table entry. However, the data pointer updating logic shouldn't be applied to NULL pointers anyway, so we instead force these entries to be read-only. These sysctls used to exist in ipv4_table (init-net only), but they were moved to the per-net ipv4_net_table, presumably without realizing that tcp_allowed_congestion_control was writable and thus introduced a leak. Because the intent of that commit was only to know (i.e. read) "which congestion algorithms are available or allowed", this read-only solution should be sufficient. The logic added in recent commit 31c4d2f160eb: ("net: Ensure net namespace isolation of sysctls") does not and cannot check for NULL data pointers, because other table entries (e.g. /proc/sys/net/netfilter/nf_log/) have .data=NULL but use other methods (.extra2) to access the struct net. |
| CVE-2021-46911 | In the Linux kernel, the following vulnerability has been resolved: ch_ktls: Fix kernel panic Taking page refcount is not ideal and causes kernel panic sometimes. It's better to take tx_ctx lock for the complete skb transmit, to avoid page cleanup if ACK received in middle. |
| CVE-2021-46910 | In the Linux kernel, the following vulnerability has been resolved: ARM: 9063/1: mm: reduce maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled The debugging code for kmap_local() doubles the number of per-CPU fixmap slots allocated for kmap_local(), in order to use half of them as guard regions. This causes the fixmap region to grow downwards beyond the start of its reserved window if the supported number of CPUs is large, and collide with the newly added virtual DT mapping right below it, which is obviously not good. One manifestation of this is EFI boot on a kernel built with NR_CPUS=32 and CONFIG_DEBUG_KMAP_LOCAL=y, which may pass the FDT in highmem, resulting in block entries below the fixmap region that the fixmap code misidentifies as fixmap table entries, and subsequently tries to dereference using a phys-to-virt translation that is only valid for lowmem. This results in a cryptic splat such as the one below. ftrace: allocating 45548 entries in 89 pages 8<--- cut here --- Unable to handle kernel paging request at virtual address fc6006f0 pgd = (ptrval) [fc6006f0] *pgd=80000040207003, *pmd=00000000 Internal error: Oops: a06 [#1] SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.11.0+ #382 Hardware name: Generic DT based system PC is at cpu_ca15_set_pte_ext+0x24/0x30 LR is at __set_fixmap+0xe4/0x118 pc : [<c041ac9c>] lr : [<c04189d8>] psr: 400000d3 sp : c1601ed8 ip : 00400000 fp : 00800000 r10: 0000071f r9 : 00421000 r8 : 00c00000 r7 : 00c00000 r6 : 0000071f r5 : ffade000 r4 : 4040171f r3 : 00c00000 r2 : 4040171f r1 : c041ac78 r0 : fc6006f0 Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 30c5387d Table: 40203000 DAC: 00000001 Process swapper (pid: 0, stack limit = 0x(ptrval)) So let's limit CONFIG_NR_CPUS to 16 when CONFIG_DEBUG_KMAP_LOCAL=y. Also, fix the BUILD_BUG_ON() check that was supposed to catch this, by checking whether the region grows below the start address rather than above the end address. |
| CVE-2021-46909 | In the Linux kernel, the following vulnerability has been resolved: ARM: footbridge: fix PCI interrupt mapping Since commit 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()"), the PCI code will call the IRQ mapping function whenever a PCI driver is probed. If these are marked as __init, this causes an oops if a PCI driver is loaded or bound after the kernel has initialised. |
| CVE-2021-46908 | In the Linux kernel, the following vulnerability has been resolved: bpf: Use correct permission flag for mixed signed bounds arithmetic We forbid adding unknown scalars with mixed signed bounds due to the spectre v1 masking mitigation. Hence this also needs bypass_spec_v1 flag instead of allow_ptr_leaks. |
| CVE-2021-46906 | In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: fix info leak in hid_submit_ctrl In hid_submit_ctrl(), the way of calculating the report length doesn't take into account that report->size can be zero. When running the syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to calculate transfer_buffer_length as 16384. When this urb is passed to the usb core layer, KMSAN reports an info leak of 16384 bytes. To fix this, first modify hid_report_len() to account for the zero report size case by using DIV_ROUND_UP for the division. Then, call it from hid_submit_ctrl(). |
| CVE-2021-46905 | In the Linux kernel, the following vulnerability has been resolved: net: hso: fix NULL-deref on disconnect regression Commit 8a12f8836145 ("net: hso: fix null-ptr-deref during tty device unregistration") fixed the racy minor allocation reported by syzbot, but introduced an unconditional NULL-pointer dereference on every disconnect instead. Specifically, the serial device table must no longer be accessed after the minor has been released by hso_serial_tty_unregister(). |
| CVE-2021-46904 | In the Linux kernel, the following vulnerability has been resolved: net: hso: fix null-ptr-deref during tty device unregistration Multiple ttys try to claim the same the minor number causing a double unregistration of the same device. The first unregistration succeeds but the next one results in a null-ptr-deref. The get_free_serial_index() function returns an available minor number but doesn't assign it immediately. The assignment is done by the caller later. But before this assignment, calls to get_free_serial_index() would return the same minor number. Fix this by modifying get_free_serial_index to assign the minor number immediately after one is found to be and rename it to obtain_minor() to better reflect what it does. Similary, rename set_serial_by_index() to release_minor() and modify it to free up the minor number of the given hso_serial. Every obtain_minor() should have corresponding release_minor() call. |
| CVE-2021-46283 | nf_tables_newset in net/netfilter/nf_tables_api.c in the Linux kernel before 5.12.13 allows local users to cause a denial of service (NULL pointer dereference and general protection fault) because of the missing initialization for nft_set_elem_expr_alloc. A local user can set a netfilter table expression in their own namespace. |
| CVE-2021-45868 | In the Linux kernel before 5.15.3, fs/quota/quota_tree.c does not validate the block number in the quota tree (on disk). This can, for example, lead to a kernel/locking/rwsem.c use-after-free if there is a corrupted quota file. |
| CVE-2021-45486 | In the IPv4 implementation in the Linux kernel before 5.12.4, net/ipv4/route.c has an information leak because the hash table is very small. |
| CVE-2021-45485 | In the IPv6 implementation in the Linux kernel before 5.13.3, net/ipv6/output_core.c has an information leak because of certain use of a hash table which, although big, doesn't properly consider that IPv6-based attackers can typically choose among many IPv6 source addresses. |
| CVE-2021-45480 | An issue was discovered in the Linux kernel before 5.15.11. There is a memory leak in the __rds_conn_create() function in net/rds/connection.c in a certain combination of circumstances. |
| CVE-2021-45469 | In __f2fs_setxattr in fs/f2fs/xattr.c in the Linux kernel through 5.15.11, there is an out-of-bounds memory access when an inode has an invalid last xattr entry. |
| CVE-2021-45402 | The check_alu_op() function in kernel/bpf/verifier.c in the Linux kernel through v5.16-rc5 did not properly update bounds while handling the mov32 instruction, which allows local users to obtain potentially sensitive address information, aka a "pointer leak." |
| CVE-2021-45100 | The ksmbd server through 3.4.2, as used in the Linux kernel through 5.15.8, sometimes communicates in cleartext even though encryption has been enabled. This occurs because it sets the SMB2_GLOBAL_CAP_ENCRYPTION flag when using the SMB 3.1.1 protocol, which is a violation of the SMB protocol specification. When Windows 10 detects this protocol violation, it disables encryption. |
| CVE-2021-45095 | pep_sock_accept in net/phonet/pep.c in the Linux kernel through 5.15.8 has a refcount leak. |
| CVE-2021-44879 | In gc_data_segment in fs/f2fs/gc.c in the Linux kernel before 5.16.3, special files are not considered, leading to a move_data_page NULL pointer dereference. |
| CVE-2021-44733 | A use-after-free exists in drivers/tee/tee_shm.c in the TEE subsystem in the Linux kernel through 5.15.11. This occurs because of a race condition in tee_shm_get_from_id during an attempt to free a shared memory object. |
| CVE-2021-4442 | In the Linux kernel, the following vulnerability has been resolved: tcp: add sanity tests to TCP_QUEUE_SEQ Qingyu Li reported a syzkaller bug where the repro changes RCV SEQ _after_ restoring data in the receive queue. mprotect(0x4aa000, 12288, PROT_READ) = 0 mmap(0x1ffff000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x1ffff000 mmap(0x20000000, 16777216, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x20000000 mmap(0x21000000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x21000000 socket(AF_INET6, SOCK_STREAM, IPPROTO_IP) = 3 setsockopt(3, SOL_TCP, TCP_REPAIR, [1], 4) = 0 connect(3, {sa_family=AF_INET6, sin6_port=htons(0), sin6_flowinfo=htonl(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_scope_id=0}, 28) = 0 setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [1], 4) = 0 sendmsg(3, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="0x0000000000000003\0\0", iov_len=20}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 setsockopt(3, SOL_TCP, TCP_REPAIR, [0], 4) = 0 setsockopt(3, SOL_TCP, TCP_QUEUE_SEQ, [128], 4) = 0 recvfrom(3, NULL, 20, 0, NULL, NULL) = -1 ECONNRESET (Connection reset by peer) syslog shows: [ 111.205099] TCP recvmsg seq # bug 2: copied 80, seq 0, rcvnxt 80, fl 0 [ 111.207894] WARNING: CPU: 1 PID: 356 at net/ipv4/tcp.c:2343 tcp_recvmsg_locked+0x90e/0x29a0 This should not be allowed. TCP_QUEUE_SEQ should only be used when queues are empty. This patch fixes this case, and the tx path as well. |
| CVE-2021-4441 | In the Linux kernel, the following vulnerability has been resolved: spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op() In zynq_qspi_exec_mem_op(), kzalloc() is directly used in memset(), which could lead to a NULL pointer dereference on failure of kzalloc(). Fix this bug by adding a check of tmpbuf. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_SPI_ZYNQ_QSPI=m show no new warnings, and our static analyzer no longer warns about this code. |
| CVE-2021-4440 | In the Linux kernel, the following vulnerability has been resolved: x86/xen: Drop USERGS_SYSRET64 paravirt call commit afd30525a659ac0ae0904f0cb4a2ca75522c3123 upstream. USERGS_SYSRET64 is used to return from a syscall via SYSRET, but a Xen PV guest will nevertheless use the IRET hypercall, as there is no sysret PV hypercall defined. So instead of testing all the prerequisites for doing a sysret and then mangling the stack for Xen PV again for doing an iret just use the iret exit from the beginning. This can easily be done via an ALTERNATIVE like it is done for the sysenter compat case already. It should be noted that this drops the optimization in Xen for not restoring a few registers when returning to user mode, but it seems as if the saved instructions in the kernel more than compensate for this drop (a kernel build in a Xen PV guest was slightly faster with this patch applied). While at it remove the stale sysret32 remnants. [ pawan: Brad Spengler and Salvatore Bonaccorso <[email protected]> reported a problem with the 5.10 backport commit edc702b4a820 ("x86/entry_64: Add VERW just before userspace transition"). When CONFIG_PARAVIRT_XXL=y, CLEAR_CPU_BUFFERS is not executed in syscall_return_via_sysret path as USERGS_SYSRET64 is runtime patched to: .cpu_usergs_sysret64 = { 0x0f, 0x01, 0xf8, 0x48, 0x0f, 0x07 }, // swapgs; sysretq which is missing CLEAR_CPU_BUFFERS. It turns out dropping USERGS_SYSRET64 simplifies the code, allowing CLEAR_CPU_BUFFERS to be explicitly added to syscall_return_via_sysret path. Below is with CONFIG_PARAVIRT_XXL=y and this patch applied: syscall_return_via_sysret: ... <+342>: swapgs <+345>: xchg %ax,%ax <+347>: verw -0x1a2(%rip) <------ <+354>: sysretq ] |
| CVE-2021-4439 | In the Linux kernel, the following vulnerability has been resolved: isdn: cpai: check ctr->cnr to avoid array index out of bound The cmtp_add_connection() would add a cmtp session to a controller and run a kernel thread to process cmtp. __module_get(THIS_MODULE); session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d", session->num); During this process, the kernel thread would call detach_capi_ctr() to detach a register controller. if the controller was not attached yet, detach_capi_ctr() would trigger an array-index-out-bounds bug. [ 46.866069][ T6479] UBSAN: array-index-out-of-bounds in drivers/isdn/capi/kcapi.c:483:21 [ 46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]' [ 46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted 5.15.0-rc2+ #8 [ 46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 46.870107][ T6479] Call Trace: [ 46.870473][ T6479] dump_stack_lvl+0x57/0x7d [ 46.870974][ T6479] ubsan_epilogue+0x5/0x40 [ 46.871458][ T6479] __ubsan_handle_out_of_bounds.cold+0x43/0x48 [ 46.872135][ T6479] detach_capi_ctr+0x64/0xc0 [ 46.872639][ T6479] cmtp_session+0x5c8/0x5d0 [ 46.873131][ T6479] ? __init_waitqueue_head+0x60/0x60 [ 46.873712][ T6479] ? cmtp_add_msgpart+0x120/0x120 [ 46.874256][ T6479] kthread+0x147/0x170 [ 46.874709][ T6479] ? set_kthread_struct+0x40/0x40 [ 46.875248][ T6479] ret_from_fork+0x1f/0x30 [ 46.875773][ T6479] |
| CVE-2021-43976 | In the Linux kernel through 5.15.2, mwifiex_usb_recv in drivers/net/wireless/marvell/mwifiex/usb.c allows an attacker (who can connect a crafted USB device) to cause a denial of service (skb_over_panic). |
| CVE-2021-43975 | In the Linux kernel through 5.15.2, hw_atl_utils_fw_rpc_wait in drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c allows an attacker (who can introduce a crafted device) to trigger an out-of-bounds write via a crafted length value. |
| CVE-2021-43389 | An issue was discovered in the Linux kernel before 5.14.15. There is an array-index-out-of-bounds flaw in the detach_capi_ctr function in drivers/isdn/capi/kcapi.c. |
| CVE-2021-43267 | An issue was discovered in net/tipc/crypto.c in the Linux kernel before 5.14.16. The Transparent Inter-Process Communication (TIPC) functionality allows remote attackers to exploit insufficient validation of user-supplied sizes for the MSG_CRYPTO message type. |
| CVE-2021-43057 | An issue was discovered in the Linux kernel before 5.14.8. A use-after-free in selinux_ptrace_traceme (aka the SELinux handler for PTRACE_TRACEME) could be used by local attackers to cause memory corruption and escalate privileges, aka CID-a3727a8bac0a. This occurs because of an attempt to access the subjective credentials of another task. |
| CVE-2021-43056 | An issue was discovered in the Linux kernel for powerpc before 5.14.15. It allows a malicious KVM guest to crash the host, when the host is running on Power8, due to an arch/powerpc/kvm/book3s_hv_rmhandlers.S implementation bug in the handling of the SRR1 register values. |
| CVE-2021-42739 | The firewire subsystem in the Linux kernel through 5.14.13 has a buffer overflow related to drivers/media/firewire/firedtv-avc.c and drivers/media/firewire/firedtv-ci.c, because avc_ca_pmt mishandles bounds checking. |
| CVE-2021-42327 | dp_link_settings_write in drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c in the Linux kernel through 5.14.14 allows a heap-based buffer overflow by an attacker who can write a string to the AMD GPU display drivers debug filesystem. There are no checks on size within parse_write_buffer_into_params when it uses the size of copy_from_user to copy a userspace buffer into a 40-byte heap buffer. |
| CVE-2021-42252 | An issue was discovered in aspeed_lpc_ctrl_mmap in drivers/soc/aspeed/aspeed-lpc-ctrl.c in the Linux kernel before 5.14.6. Local attackers able to access the Aspeed LPC control interface could overwrite memory in the kernel and potentially execute privileges, aka CID-b49a0e69a7b1. This occurs because a certain comparison uses values that are not memory sizes. |
| CVE-2021-4204 | An out-of-bounds (OOB) memory access flaw was found in the Linux kernel's eBPF due to an Improper Input Validation. This flaw allows a local attacker with a special privilege to crash the system or leak internal information. |
| CVE-2021-4203 | A use-after-free read flaw was found in sock_getsockopt() in net/core/sock.c due to SO_PEERCRED and SO_PEERGROUPS race with listen() (and connect()) in the Linux kernel. In this flaw, an attacker with a user privileges may crash the system or leak internal kernel information. |
| CVE-2021-4202 | A use-after-free flaw was found in nci_request in net/nfc/nci/core.c in NFC Controller Interface (NCI) in the Linux kernel. This flaw could allow a local attacker with user privileges to cause a data race problem while the device is getting removed, leading to a privilege escalation problem. |
| CVE-2021-42008 | The decode_data function in drivers/net/hamradio/6pack.c in the Linux kernel before 5.13.13 has a slab out-of-bounds write. Input from a process that has the CAP_NET_ADMIN capability can lead to root access. |
| CVE-2021-4197 | An unprivileged write to the file handler flaw in the Linux kernel's control groups and namespaces subsystem was found in the way users have access to some less privileged process that are controlled by cgroups and have higher privileged parent process. It is actually both for cgroup2 and cgroup1 versions of control groups. A local user could use this flaw to crash the system or escalate their privileges on the system. |
| CVE-2021-41864 | prealloc_elems_and_freelist in kernel/bpf/stackmap.c in the Linux kernel before 5.14.12 allows unprivileged users to trigger an eBPF multiplication integer overflow with a resultant out-of-bounds write. |
| CVE-2021-4159 | A vulnerability was found in the Linux kernel's EBPF verifier when handling internal data structures. Internal memory locations could be returned to userspace. A local attacker with the permissions to insert eBPF code to the kernel can use this to leak internal kernel memory details defeating some of the exploit mitigations in place for the kernel. |
| CVE-2021-4157 | An out of memory bounds write flaw (1 or 2 bytes of memory) in the Linux kernel NFS subsystem was found in the way users use mirroring (replication of files with NFS). A user, having access to the NFS mount, could potentially use this flaw to crash the system or escalate privileges on the system. |
| CVE-2021-4155 | A data leak flaw was found in the way XFS_IOC_ALLOCSP IOCTL in the XFS filesystem allowed for size increase of files with unaligned size. A local attacker could use this flaw to leak data on the XFS filesystem otherwise not accessible to them. |
| CVE-2021-4154 | A use-after-free flaw was found in cgroup1_parse_param in kernel/cgroup/cgroup-v1.c in the Linux kernel's cgroup v1 parser. A local attacker with a user privilege could cause a privilege escalation by exploiting the fsconfig syscall parameter leading to a container breakout and a denial of service on the system. |
| CVE-2021-4150 | A use-after-free flaw was found in the add_partition in block/partitions/core.c in the Linux kernel. A local attacker with user privileges could cause a denial of service on the system. The issue results from the lack of code cleanup when device_add call fails when adding a partition to the disk. |
| CVE-2021-4149 | A vulnerability was found in btrfs_alloc_tree_b in fs/btrfs/extent-tree.c in the Linux kernel due to an improper lock operation in btrfs. In this flaw, a user with a local privilege may cause a denial of service (DOS) due to a deadlock problem. |
| CVE-2021-4148 | A vulnerability was found in the Linux kernel's block_invalidatepage in fs/buffer.c in the filesystem. A missing sanity check may allow a local attacker with user privilege to cause a denial of service (DOS) problem. |
| CVE-2021-4135 | A memory leak vulnerability was found in the Linux kernel's eBPF for the Simulated networking device driver in the way user uses BPF for the device such that function nsim_map_alloc_elem being called. A local user could use this flaw to get unauthorized access to some data. |
| CVE-2021-41073 | loop_rw_iter in fs/io_uring.c in the Linux kernel 5.10 through 5.14.6 allows local users to gain privileges by using IORING_OP_PROVIDE_BUFFERS to trigger a free of a kernel buffer, as demonstrated by using /proc/<pid>/maps for exploitation. |
| CVE-2021-4095 | A NULL pointer dereference was found in the Linux kernel's KVM when dirty ring logging is enabled without an active vCPU context. An unprivileged local attacker on the host may use this flaw to cause a kernel oops condition and thus a denial of service by issuing a KVM_XEN_HVM_SET_ATTR ioctl. This flaw affects Linux kernel versions prior to 5.17-rc1. |
| CVE-2021-4090 | An out-of-bounds (OOB) memory write flaw was found in the NFSD in the Linux kernel. Missing sanity may lead to a write beyond bmval[bmlen-1] in nfsd4_decode_bitmap4 in fs/nfsd/nfs4xdr.c. In this flaw, a local attacker with user privilege may gain access to out-of-bounds memory, leading to a system integrity and confidentiality threat. |
| CVE-2021-4083 | A read-after-free memory flaw was found in the Linux kernel's garbage collection for Unix domain socket file handlers in the way users call close() and fget() simultaneously and can potentially trigger a race condition. This flaw allows a local user to crash the system or escalate their privileges on the system. This flaw affects Linux kernel versions prior to 5.16-rc4. |
| CVE-2021-40490 | A race condition was discovered in ext4_write_inline_data_end in fs/ext4/inline.c in the ext4 subsystem in the Linux kernel through 5.13.13. |
| CVE-2021-4037 | A vulnerability was found in the fs/inode.c:inode_init_owner() function logic of the LInux kernel that allows local users to create files for the XFS file-system with an unintended group ownership and with group execution and SGID permission bits set, in a scenario where a directory is SGID and belongs to a certain group and is writable by a user who is not a member of this group. This can lead to excessive permissions granted in case when they should not. This vulnerability is similar to the previous CVE-2018-13405 and adds the missed fix for the XFS. |
| CVE-2021-4032 | A vulnerability was found in the Linux kernel's KVM subsystem in arch/x86/kvm/lapic.c kvm_free_lapic when a failure allocation was detected. In this flaw the KVM subsystem may crash the kernel due to mishandling of memory errors that happens during VCPU construction, which allows an attacker with special user privilege to cause a denial of service. This flaw affects kernel versions prior to 5.15 rc7. |
| CVE-2021-4028 | A flaw in the Linux kernel's implementation of RDMA communications manager listener code allowed an attacker with local access to setup a socket to listen on a high port allowing for a list element to be used after free. Given the ability to execute code, a local attacker could leverage this use-after-free to crash the system or possibly escalate privileges on the system. |
| CVE-2021-4023 | A flaw was found in the io-workqueue implementation in the Linux kernel versions prior to 5.15-rc1. The kernel can panic when an improper cancellation operation triggers the submission of new io-uring operations during a shortage of free space. This flaw allows a local user with permissions to execute io-uring requests to possibly crash the system. |
| CVE-2021-4002 | A memory leak flaw in the Linux kernel's hugetlbfs memory usage was found in the way the user maps some regions of memory twice using shmget() which are aligned to PUD alignment with the fault of some of the memory pages. A local user could use this flaw to get unauthorized access to some data. |
| CVE-2021-4001 | A race condition was found in the Linux kernel's ebpf verifier between bpf_map_update_elem and bpf_map_freeze due to a missing lock in kernel/bpf/syscall.c. In this flaw, a local user with a special privilege (cap_sys_admin or cap_bpf) can modify the frozen mapped address space. This flaw affects kernel versions prior to 5.16 rc2. |
| CVE-2021-39713 | Product: AndroidVersions: Android kernelAndroid ID: A-173788806References: Upstream kernel |
| CVE-2021-3923 | A flaw was found in the Linux kernel's implementation of RDMA over infiniband. An attacker with a privileged local account can leak kernel stack information when issuing commands to the /dev/infiniband/rdma_cm device node. While this access is unlikely to leak sensitive user information, it can be further used to defeat existing kernel protection mechanisms. |
| CVE-2021-3847 | An unauthorized access to the execution of the setuid file with capabilities flaw in the Linux kernel OverlayFS subsystem was found in the way user copying a capable file from a nosuid mount into another mount. A local user could use this flaw to escalate their privileges on the system. |
| CVE-2021-38300 | arch/mips/net/bpf_jit.c in the Linux kernel before 5.4.10 can generate undesirable machine code when transforming unprivileged cBPF programs, allowing execution of arbitrary code within the kernel context. This occurs because conditional branches can exceed the 128 KB limit of the MIPS architecture. |
| CVE-2021-38209 | net/netfilter/nf_conntrack_standalone.c in the Linux kernel before 5.12.2 allows observation of changes in any net namespace because these changes are leaked into all other net namespaces. This is related to the NF_SYSCTL_CT_MAX, NF_SYSCTL_CT_EXPECT_MAX, and NF_SYSCTL_CT_BUCKETS sysctls. |
| CVE-2021-38208 | net/nfc/llcp_sock.c in the Linux kernel before 5.12.10 allows local unprivileged users to cause a denial of service (NULL pointer dereference and BUG) by making a getsockname call after a certain type of failure of a bind call. |
| CVE-2021-38207 | drivers/net/ethernet/xilinx/ll_temac_main.c in the Linux kernel before 5.12.13 allows remote attackers to cause a denial of service (buffer overflow and lockup) by sending heavy network traffic for about ten minutes. |
| CVE-2021-38206 | The mac80211 subsystem in the Linux kernel before 5.12.13, when a device supporting only 5 GHz is used, allows attackers to cause a denial of service (NULL pointer dereference in the radiotap parser) by injecting a frame with 802.11a rates. |
| CVE-2021-38205 | drivers/net/ethernet/xilinx/xilinx_emaclite.c in the Linux kernel before 5.13.3 makes it easier for attackers to defeat an ASLR protection mechanism because it prints a kernel pointer (i.e., the real IOMEM pointer). |
| CVE-2021-38204 | drivers/usb/host/max3421-hcd.c in the Linux kernel before 5.13.6 allows physically proximate attackers to cause a denial of service (use-after-free and panic) by removing a MAX-3421 USB device in certain situations. |
| CVE-2021-38203 | btrfs in the Linux kernel before 5.13.4 allows attackers to cause a denial of service (deadlock) via processes that trigger allocation of new system chunks during times when there is a shortage of free space in the system space_info. |
| CVE-2021-38202 | fs/nfsd/trace.h in the Linux kernel before 5.13.4 might allow remote attackers to cause a denial of service (out-of-bounds read in strlen) by sending NFS traffic when the trace event framework is being used for nfsd. |
| CVE-2021-38201 | net/sunrpc/xdr.c in the Linux kernel before 5.13.4 allows remote attackers to cause a denial of service (xdr_set_page_base slab-out-of-bounds access) by performing many NFS 4.2 READ_PLUS operations. |
| CVE-2021-38200 | arch/powerpc/perf/core-book3s.c in the Linux kernel before 5.12.13, on systems with perf_event_paranoid=-1 and no specific PMU driver support registered, allows local users to cause a denial of service (perf_instruction_pointer NULL pointer dereference and OOPS) via a "perf record" command. |
| CVE-2021-38199 | fs/nfs/nfs4client.c in the Linux kernel before 5.13.4 has incorrect connection-setup ordering, which allows operators of remote NFSv4 servers to cause a denial of service (hanging of mounts) by arranging for those servers to be unreachable during trunking detection. |
| CVE-2021-38198 | arch/x86/kvm/mmu/paging_tmpl.h in the Linux kernel before 5.12.11 incorrectly computes the access permissions of a shadow page, leading to a missing guest protection page fault. |
| CVE-2021-38166 | In kernel/bpf/hashtab.c in the Linux kernel through 5.13.8, there is an integer overflow and out-of-bounds write when many elements are placed in a single bucket. NOTE: exploitation might be impractical without the CAP_SYS_ADMIN capability. |
| CVE-2021-38160 | ** DISPUTED ** In drivers/char/virtio_console.c in the Linux kernel before 5.13.4, data corruption or loss can be triggered by an untrusted device that supplies a buf->len value exceeding the buffer size. NOTE: the vendor indicates that the cited data corruption is not a vulnerability in any existing use case; the length validation was added solely for robustness in the face of anomalous host OS behavior. |
| CVE-2021-3772 | A flaw was found in the Linux SCTP stack. A blind attacker may be able to kill an existing SCTP association through invalid chunks if the attacker knows the IP-addresses and port numbers being used and the attacker can send packets with spoofed IP addresses. |
| CVE-2021-3764 | A memory leak flaw was found in the Linux kernel's ccp_run_aes_gcm_cmd() function that allows an attacker to cause a denial of service. The vulnerability is similar to the older CVE-2019-18808. The highest threat from this vulnerability is to system availability. |
| CVE-2021-3760 | A flaw was found in the Linux kernel. A use-after-free vulnerability in the NFC stack can lead to a threat to confidentiality, integrity, and system availability. |
| CVE-2021-37576 | arch/powerpc/kvm/book3s_rtas.c in the Linux kernel through 5.13.5 on the powerpc platform allows KVM guest OS users to cause host OS memory corruption via rtas_args.nargs, aka CID-f62f3c20647e. |
| CVE-2021-3753 | A race problem was seen in the vt_k_ioctl in drivers/tty/vt/vt_ioctl.c in the Linux kernel, which may cause an out of bounds read in vt as the write access to vc_mode is not protected by lock-in vt_ioctl (KDSETMDE). The highest threat from this vulnerability is to data confidentiality. |
| CVE-2021-3744 | A memory leak flaw was found in the Linux kernel in the ccp_run_aes_gcm_cmd() function in drivers/crypto/ccp/ccp-ops.c, which allows attackers to cause a denial of service (memory consumption). This vulnerability is similar with the older CVE-2019-18808. |
| CVE-2021-3743 | An out-of-bounds (OOB) memory read flaw was found in the Qualcomm IPC router protocol in the Linux kernel. A missing sanity check allows a local attacker to gain access to out-of-bounds memory, leading to a system crash or a leak of internal kernel information. The highest threat from this vulnerability is to system availability. |
| CVE-2021-3739 | A NULL pointer dereference flaw was found in the btrfs_rm_device function in fs/btrfs/volumes.c in the Linux Kernel, where triggering the bug requires ‘CAP_SYS_ADMIN’. This flaw allows a local attacker to crash the system or leak kernel internal information. The highest threat from this vulnerability is to system availability. |
| CVE-2021-3736 | A flaw was found in the Linux kernel. A memory leak problem was found in mbochs_ioctl in samples/vfio-mdev/mbochs.c in Virtual Function I/O (VFIO) Mediated devices. This flaw could allow a local attacker to leak internal kernel information. |
| CVE-2021-3732 | A flaw was found in the Linux kernel's OverlayFS subsystem in the way the user mounts the TmpFS filesystem with OverlayFS. This flaw allows a local user to gain access to hidden files that should not be accessible. |
| CVE-2021-37159 | hso_free_net_device in drivers/net/usb/hso.c in the Linux kernel through 5.13.4 calls unregister_netdev without checking for the NETREG_REGISTERED state, leading to a use-after-free and a double free. |
| CVE-2021-3715 | A flaw was found in the "Routing decision" classifier in the Linux kernel's Traffic Control networking subsystem in the way it handled changing of classification filters, leading to a use-after-free condition. This flaw allows unprivileged local users to escalate their privileges on the system. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. |
| CVE-2021-3679 | A lack of CPU resource in the Linux kernel tracing module functionality in versions prior to 5.14-rc3 was found in the way user uses trace ring buffer in a specific way. Only privileged local users (with CAP_SYS_ADMIN capability) could use this flaw to starve the resources causing denial of service. |
| CVE-2021-3669 | A flaw was found in the Linux kernel. Measuring usage of the shared memory does not scale with large shared memory segment counts which could lead to resource exhaustion and DoS. |
| CVE-2021-3659 | A NULL pointer dereference flaw was found in the Linux kernel’s IEEE 802.15.4 wireless networking subsystem in the way the user closes the LR-WPAN connection. This flaw allows a local user to crash the system. The highest threat from this vulnerability is to system availability. |
| CVE-2021-3655 | A vulnerability was found in the Linux kernel in versions prior to v5.14-rc1. Missing size validations on inbound SCTP packets may allow the kernel to read uninitialized memory. |
| CVE-2021-3653 | A flaw was found in the KVM's AMD code for supporting SVM nested virtualization. The flaw occurs when processing the VMCB (virtual machine control block) provided by the L1 guest to spawn/handle a nested guest (L2). Due to improper validation of the "int_ctl" field, this issue could allow a malicious L1 to enable AVIC support (Advanced Virtual Interrupt Controller) for the L2 guest. As a result, the L2 guest would be allowed to read/write physical pages of the host, resulting in a crash of the entire system, leak of sensitive data or potential guest-to-host escape. This flaw affects Linux kernel versions prior to 5.14-rc7. |
| CVE-2021-3640 | A flaw use-after-free in function sco_sock_sendmsg() of the Linux kernel HCI subsystem was found in the way user calls ioct UFFDIO_REGISTER or other way triggers race condition of the call sco_conn_del() together with the call sco_sock_sendmsg() with the expected controllable faulting memory page. A privileged local user could use this flaw to crash the system or escalate their privileges on the system. |
| CVE-2021-3635 | A flaw was found in the Linux kernel netfilter implementation in versions prior to 5.5-rc7. A user with root (CAP_SYS_ADMIN) access is able to panic the system when issuing netfilter netflow commands. |
| CVE-2021-3612 | An out-of-bounds memory write flaw was found in the Linux kernel's joystick devices subsystem in versions before 5.9-rc1, in the way the user calls ioctl JSIOCSBTNMAP. This flaw allows a local user to crash the system or possibly escalate their privileges on the system. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. |
| CVE-2021-3609 | .A flaw was found in the CAN BCM networking protocol in the Linux kernel, where a local attacker can abuse a flaw in the CAN subsystem to corrupt memory, crash the system or escalate privileges. This race condition in net/can/bcm.c in the Linux kernel allows for local privilege escalation to root. |
| CVE-2021-3600 | It was discovered that the eBPF implementation in the Linux kernel did not properly track bounds information for 32 bit registers when performing div and mod operations. A local attacker could use this to possibly execute arbitrary code. |
| CVE-2021-3573 | A use-after-free in function hci_sock_bound_ioctl() of the Linux kernel HCI subsystem was found in the way user calls ioct HCIUNBLOCKADDR or other way triggers race condition of the call hci_unregister_dev() together with one of the calls hci_sock_blacklist_add(), hci_sock_blacklist_del(), hci_get_conn_info(), hci_get_auth_info(). A privileged local user could use this flaw to crash the system or escalate their privileges on the system. This flaw affects the Linux kernel versions prior to 5.13-rc5. |
| CVE-2021-3564 | A flaw double-free memory corruption in the Linux kernel HCI device initialization subsystem was found in the way user attach malicious HCI TTY Bluetooth device. A local user could use this flaw to crash the system. This flaw affects all the Linux kernel versions starting from 3.13. |
| CVE-2021-35477 | In the Linux kernel through 5.13.7, an unprivileged BPF program can obtain sensitive information from kernel memory via a Speculative Store Bypass side-channel attack because a certain preempting store operation does not necessarily occur before a store operation that has an attacker-controlled value. |
| CVE-2021-3506 | An out-of-bounds (OOB) memory access flaw was found in fs/f2fs/node.c in the f2fs module in the Linux kernel in versions before 5.12.0-rc4. A bounds check failure allows a local attacker to gain access to out-of-bounds memory leading to a system crash or a leak of internal kernel information. The highest threat from this vulnerability is to system availability. |
| CVE-2021-35039 | kernel/module.c in the Linux kernel before 5.12.14 mishandles Signature Verification, aka CID-0c18f29aae7c. Without CONFIG_MODULE_SIG, verification that a kernel module is signed, for loading via init_module, does not occur for a module.sig_enforce=1 command-line argument. |
| CVE-2021-3501 | A flaw was found in the Linux kernel in versions before 5.12. The value of internal.ndata, in the KVM API, is mapped to an array index, which can be updated by a user process at anytime which could lead to an out-of-bounds write. The highest threat from this vulnerability is to data integrity and system availability. |
| CVE-2021-34981 | Linux Kernel Bluetooth CMTP Module Double Free Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Linux Kernel. An attacker must first obtain the ability to execute high-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the CMTP module. The issue results from the lack of validating the existence of an object prior to performing further free operations on the object. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the kernel. Was ZDI-CAN-11977. |
| CVE-2021-3493 | The overlayfs implementation in the linux kernel did not properly validate with respect to user namespaces the setting of file capabilities on files in an underlying file system. Due to the combination of unprivileged user namespaces along with a patch carried in the Ubuntu kernel to allow unprivileged overlay mounts, an attacker could use this to gain elevated privileges. |
| CVE-2021-3492 | Shiftfs, an out-of-tree stacking file system included in Ubuntu Linux kernels, did not properly handle faults occurring during copy_from_user() correctly. These could lead to either a double-free situation or memory not being freed at all. An attacker could use this to cause a denial of service (kernel memory exhaustion) or gain privileges via executing arbitrary code. AKA ZDI-CAN-13562. |
| CVE-2021-3491 | The io_uring subsystem in the Linux kernel allowed the MAX_RW_COUNT limit to be bypassed in the PROVIDE_BUFFERS operation, which led to negative values being usedin mem_rw when reading /proc/<PID>/mem. This could be used to create a heap overflow leading to arbitrary code execution in the kernel. It was addressed via commit d1f82808877b ("io_uring: truncate lengths larger than MAX_RW_COUNT on provide buffers") (v5.13-rc1) and backported to the stable kernels in v5.12.4, v5.11.21, and v5.10.37. It was introduced in ddf0322db79c ("io_uring: add IORING_OP_PROVIDE_BUFFERS") (v5.7-rc1). |
| CVE-2021-3490 | The eBPF ALU32 bounds tracking for bitwise ops (AND, OR and XOR) in the Linux kernel did not properly update 32-bit bounds, which could be turned into out of bounds reads and writes in the Linux kernel and therefore, arbitrary code execution. This issue was fixed via commit 049c4e13714e ("bpf: Fix alu32 const subreg bound tracking on bitwise operations") (v5.13-rc4) and backported to the stable kernels in v5.12.4, v5.11.21, and v5.10.37. The AND/OR issues were introduced by commit 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") (5.7-rc1) and the XOR variant was introduced by 2921c90d4718 ("bpf:Fix a verifier failure with xor") ( 5.10-rc1). |
| CVE-2021-3489 | The eBPF RINGBUF bpf_ringbuf_reserve() function in the Linux kernel did not check that the allocated size was smaller than the ringbuf size, allowing an attacker to perform out-of-bounds writes within the kernel and therefore, arbitrary code execution. This issue was fixed via commit 4b81ccebaeee ("bpf, ringbuf: Deny reserve of buffers larger than ringbuf") (v5.13-rc4) and backported to the stable kernels in v5.12.4, v5.11.21, and v5.10.37. It was introduced via 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") (v5.8-rc1). |
| CVE-2021-34866 | This vulnerability allows local attackers to escalate privileges on affected installations of Linux Kernel 5.14-rc3. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the handling of eBPF programs. The issue results from the lack of proper validation of user-supplied eBPF programs, which can result in a type confusion condition. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the kernel. Was ZDI-CAN-14689. |
| CVE-2021-3483 | A flaw was found in the Nosy driver in the Linux kernel. This issue allows a device to be inserted twice into a doubly-linked list, leading to a use-after-free when one of these devices is removed. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. Versions before kernel 5.12-rc6 are affected |
| CVE-2021-34693 | net/can/bcm.c in the Linux kernel through 5.12.10 allows local users to obtain sensitive information from kernel stack memory because parts of a data structure are uninitialized. |
| CVE-2021-34556 | In the Linux kernel through 5.13.7, an unprivileged BPF program can obtain sensitive information from kernel memory via a Speculative Store Bypass side-channel attack because the protection mechanism neglects the possibility of uninitialized memory locations on the BPF stack. |
| CVE-2021-3444 | The bpf verifier in the Linux kernel did not properly handle mod32 destination register truncation when the source register was known to be 0. A local attacker with the ability to load bpf programs could use this gain out-of-bounds reads in kernel memory leading to information disclosure (kernel memory), and possibly out-of-bounds writes that could potentially lead to code execution. This issue was addressed in the upstream kernel in commit 9b00f1b78809 ("bpf: Fix truncation handling for mod32 dst reg wrt zero") and in Linux stable kernels 5.11.2, 5.10.19, and 5.4.101. |
| CVE-2021-34401 | NVIDIA Linux kernel distributions contain a vulnerability in nvmap NVGPU_IOCTL_CHANNEL_SET_ERROR_NOTIFIER, where improper access control may lead to code execution, compromised integrity, or denial of service. |
| CVE-2021-34373 | Trusty trusted Linux kernel (TLK) contains a vulnerability in the NVIDIA TLK kernel where a lack of heap hardening could cause heap overflows, which might lead to information disclosure and denial of service. |
| CVE-2021-3428 | A flaw was found in the Linux kernel. A denial of service problem is identified if an extent tree is corrupted in a crafted ext4 filesystem in fs/ext4/extents.c in ext4_es_cache_extent. Fabricating an integer overflow, A local attacker with a special user privilege may cause a system crash problem which can lead to an availability threat. |
| CVE-2021-3411 | A flaw was found in the Linux kernel in versions prior to 5.10. A violation of memory access was found while detecting a padding of int3 in the linking state. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability. |
| CVE-2021-33909 | fs/seq_file.c in the Linux kernel 3.16 through 5.13.x before 5.13.4 does not properly restrict seq buffer allocations, leading to an integer overflow, an Out-of-bounds Write, and escalation to root by an unprivileged user, aka CID-8cae8cd89f05. |
| CVE-2021-33656 | When setting font with malicous data by ioctl cmd PIO_FONT,kernel will write memory out of bounds. |
| CVE-2021-33655 | When sending malicous data to kernel by ioctl cmd FBIOPUT_VSCREENINFO,kernel will write memory out of bounds. |
| CVE-2021-33631 | Integer Overflow or Wraparound vulnerability in openEuler kernel on Linux (filesystem modules) allows Forced Integer Overflow.This issue affects openEuler kernel: from 4.19.90 before 4.19.90-2401.3, from 5.10.0-60.18.0 before 5.10.0-183.0.0. |
| CVE-2021-33630 | NULL Pointer Dereference vulnerability in openEuler kernel on Linux (network modules) allows Pointer Manipulation. This vulnerability is associated with program files net/sched/sch_cbs.C. This issue affects openEuler kernel: from 4.19.90 before 4.19.90-2401.3. |
| CVE-2021-33624 | In kernel/bpf/verifier.c in the Linux kernel before 5.12.13, a branch can be mispredicted (e.g., because of type confusion) and consequently an unprivileged BPF program can read arbitrary memory locations via a side-channel attack, aka CID-9183671af6db. |
| CVE-2021-3348 | nbd_add_socket in drivers/block/nbd.c in the Linux kernel through 5.10.12 has an ndb_queue_rq use-after-free that could be triggered by local attackers (with access to the nbd device) via an I/O request at a certain point during device setup, aka CID-b98e762e3d71. |
| CVE-2021-3347 | An issue was discovered in the Linux kernel through 5.10.11. PI futexes have a kernel stack use-after-free during fault handling, allowing local users to execute code in the kernel, aka CID-34b1a1ce1458. |
| CVE-2021-33200 | kernel/bpf/verifier.c in the Linux kernel through 5.12.7 enforces incorrect limits for pointer arithmetic operations, aka CID-bb01a1bba579. This can be abused to perform out-of-bounds reads and writes in kernel memory, leading to local privilege escalation to root. In particular, there is a corner case where the off reg causes a masking direction change, which then results in an incorrect final aux->alu_limit. |
| CVE-2021-33135 | Uncontrolled resource consumption in the Linux kernel drivers for Intel(R) SGX may allow an authenticated user to potentially enable denial of service via local access. |
| CVE-2021-33034 | In the Linux kernel before 5.12.4, net/bluetooth/hci_event.c has a use-after-free when destroying an hci_chan, aka CID-5c4c8c954409. This leads to writing an arbitrary value. |
| CVE-2021-33033 | The Linux kernel before 5.11.14 has a use-after-free in cipso_v4_genopt in net/ipv4/cipso_ipv4.c because the CIPSO and CALIPSO refcounting for the DOI definitions is mishandled, aka CID-ad5d07f4a9cd. This leads to writing an arbitrary value. |
| CVE-2021-32606 | In the Linux kernel 5.11 through 5.12.2, isotp_setsockopt in net/can/isotp.c allows privilege escalation to root by leveraging a use-after-free. (This does not affect earlier versions that lack CAN ISOTP SF_BROADCAST support.) |
| CVE-2021-32399 | net/bluetooth/hci_request.c in the Linux kernel through 5.12.2 has a race condition for removal of the HCI controller. |
| CVE-2021-32078 | An Out-of-Bounds Read was discovered in arch/arm/mach-footbridge/personal-pci.c in the Linux kernel through 5.12.11 because of the lack of a check for a value that shouldn't be negative, e.g., access to element -2 of an array, aka CID-298a58e165e4. |
| CVE-2021-31916 | An out-of-bounds (OOB) memory write flaw was found in list_devices in drivers/md/dm-ioctl.c in the Multi-device driver module in the Linux kernel before 5.12. A bound check failure allows an attacker with special user (CAP_SYS_ADMIN) privilege to gain access to out-of-bounds memory leading to a system crash or a leak of internal kernel information. The highest threat from this vulnerability is to system availability. |
| CVE-2021-31829 | kernel/bpf/verifier.c in the Linux kernel through 5.12.1 performs undesirable speculative loads, leading to disclosure of stack content via side-channel attacks, aka CID-801c6058d14a. The specific concern is not protecting the BPF stack area against speculative loads. Also, the BPF stack can contain uninitialized data that might represent sensitive information previously operated on by the kernel. |
| CVE-2021-31795 | The PowerVR GPU kernel driver in pvrsrvkm.ko through 2021-04-24 for the Linux kernel, as used on Alcatel 1S phones, allows attackers to overwrite heap memory via PhysmemNewRamBackedPMR. |
| CVE-2021-3178 | ** DISPUTED ** fs/nfsd/nfs3xdr.c in the Linux kernel through 5.10.8, when there is an NFS export of a subdirectory of a filesystem, allows remote attackers to traverse to other parts of the filesystem via READDIRPLUS. NOTE: some parties argue that such a subdirectory export is not intended to prevent this attack; see also the exports(5) no_subtree_check default behavior. |
| CVE-2021-31440 | This vulnerability allows local attackers to escalate privileges on affected installations of Linux Kernel 5.11.15. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the handling of eBPF programs. The issue results from the lack of proper validation of user-supplied eBPF programs prior to executing them. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the kernel. Was ZDI-CAN-13661. |
| CVE-2021-30178 | An issue was discovered in the Linux kernel through 5.11.11. synic_get in arch/x86/kvm/hyperv.c has a NULL pointer dereference for certain accesses to the SynIC Hyper-V context, aka CID-919f4ebc5987. |
| CVE-2021-30002 | An issue was discovered in the Linux kernel before 5.11.3 when a webcam device exists. video_usercopy in drivers/media/v4l2-core/v4l2-ioctl.c has a memory leak for large arguments, aka CID-fb18802a338b. |
| CVE-2021-29657 | arch/x86/kvm/svm/nested.c in the Linux kernel before 5.11.12 has a use-after-free in which an AMD KVM guest can bypass access control on host OS MSRs when there are nested guests, aka CID-a58d9166a756. This occurs because of a TOCTOU race condition associated with a VMCB12 double fetch in nested_svm_vmrun. |
| CVE-2021-29650 | An issue was discovered in the Linux kernel before 5.11.11. The netfilter subsystem allows attackers to cause a denial of service (panic) because net/netfilter/x_tables.c and include/linux/netfilter/x_tables.h lack a full memory barrier upon the assignment of a new table value, aka CID-175e476b8cdf. |
| CVE-2021-29649 | An issue was discovered in the Linux kernel before 5.11.11. The user mode driver (UMD) has a copy_process() memory leak, related to a lack of cleanup steps in kernel/usermode_driver.c and kernel/bpf/preload/bpf_preload_kern.c, aka CID-f60a85cad677. |
| CVE-2021-29648 | An issue was discovered in the Linux kernel before 5.11.11. The BPF subsystem does not properly consider that resolved_ids and resolved_sizes are intentionally uninitialized in the vmlinux BPF Type Format (BTF), which can cause a system crash upon an unexpected access attempt (in map_create in kernel/bpf/syscall.c or check_btf_info in kernel/bpf/verifier.c), aka CID-350a5c4dd245. |
| CVE-2021-29647 | An issue was discovered in the Linux kernel before 5.11.11. qrtr_recvmsg in net/qrtr/qrtr.c allows attackers to obtain sensitive information from kernel memory because of a partially uninitialized data structure, aka CID-50535249f624. |
| CVE-2021-29646 | An issue was discovered in the Linux kernel before 5.11.11. tipc_nl_retrieve_key in net/tipc/node.c does not properly validate certain data sizes, aka CID-0217ed2848e8. |
| CVE-2021-29266 | An issue was discovered in the Linux kernel before 5.11.9. drivers/vhost/vdpa.c has a use-after-free because v->config_ctx has an invalid value upon re-opening a character device, aka CID-f6bbf0010ba0. |
| CVE-2021-29265 | An issue was discovered in the Linux kernel before 5.11.7. usbip_sockfd_store in drivers/usb/usbip/stub_dev.c allows attackers to cause a denial of service (GPF) because the stub-up sequence has race conditions during an update of the local and shared status, aka CID-9380afd6df70. |
| CVE-2021-29264 | An issue was discovered in the Linux kernel through 5.11.10. drivers/net/ethernet/freescale/gianfar.c in the Freescale Gianfar Ethernet driver allows attackers to cause a system crash because a negative fragment size is calculated in situations involving an rx queue overrun when jumbo packets are used and NAPI is enabled, aka CID-d8861bab48b6. |
| CVE-2021-29155 | An issue was discovered in the Linux kernel through 5.11.x. kernel/bpf/verifier.c performs undesirable out-of-bounds speculation on pointer arithmetic, leading to side-channel attacks that defeat Spectre mitigations and obtain sensitive information from kernel memory. Specifically, for sequences of pointer arithmetic operations, the pointer modification performed by the first operation is not correctly accounted for when restricting subsequent operations. |
| CVE-2021-29154 | BPF JIT compilers in the Linux kernel through 5.11.12 have incorrect computation of branch displacements, allowing them to execute arbitrary code within the kernel context. This affects arch/x86/net/bpf_jit_comp.c and arch/x86/net/bpf_jit_comp32.c. |
| CVE-2021-28972 | In drivers/pci/hotplug/rpadlpar_sysfs.c in the Linux kernel through 5.11.8, the RPA PCI Hotplug driver has a user-tolerable buffer overflow when writing a new device name to the driver from userspace, allowing userspace to write data to the kernel stack frame directly. This occurs because add_slot_store and remove_slot_store mishandle drc_name '\0' termination, aka CID-cc7a0bb058b8. |
| CVE-2021-28971 | In intel_pmu_drain_pebs_nhm in arch/x86/events/intel/ds.c in the Linux kernel through 5.11.8 on some Haswell CPUs, userspace applications (such as perf-fuzzer) can cause a system crash because the PEBS status in a PEBS record is mishandled, aka CID-d88d05a9e0b6. |
| CVE-2021-28964 | A race condition was discovered in get_old_root in fs/btrfs/ctree.c in the Linux kernel through 5.11.8. It allows attackers to cause a denial of service (BUG) because of a lack of locking on an extent buffer before a cloning operation, aka CID-dbcc7d57bffc. |
| CVE-2021-28952 | An issue was discovered in the Linux kernel through 5.11.8. The sound/soc/qcom/sdm845.c soundwire device driver has a buffer overflow when an unexpected port ID number is encountered, aka CID-1c668e1c0a0f. (This has been fixed in 5.12-rc4.) |
| CVE-2021-28951 | An issue was discovered in fs/io_uring.c in the Linux kernel through 5.11.8. It allows attackers to cause a denial of service (deadlock) because exit may be waiting to park a SQPOLL thread, but concurrently that SQPOLL thread is waiting for a signal to start, aka CID-3ebba796fa25. |
| CVE-2021-28950 | An issue was discovered in fs/fuse/fuse_i.h in the Linux kernel before 5.11.8. A "stall on CPU" can occur because a retry loop continually finds the same bad inode, aka CID-775c5033a0d1. |
| CVE-2021-28715 | Guest can force Linux netback driver to hog large amounts of kernel memory T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Incoming data packets for a guest in the Linux kernel's netback driver are buffered until the guest is ready to process them. There are some measures taken for avoiding to pile up too much data, but those can be bypassed by the guest: There is a timeout how long the client side of an interface can stop consuming new packets before it is assumed to have stalled, but this timeout is rather long (60 seconds by default). Using a UDP connection on a fast interface can easily accumulate gigabytes of data in that time. (CVE-2021-28715) The timeout could even never trigger if the guest manages to have only one free slot in its RX queue ring page and the next package would require more than one free slot, which may be the case when using GSO, XDP, or software hashing. (CVE-2021-28714) |
| CVE-2021-28714 | Guest can force Linux netback driver to hog large amounts of kernel memory T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Incoming data packets for a guest in the Linux kernel's netback driver are buffered until the guest is ready to process them. There are some measures taken for avoiding to pile up too much data, but those can be bypassed by the guest: There is a timeout how long the client side of an interface can stop consuming new packets before it is assumed to have stalled, but this timeout is rather long (60 seconds by default). Using a UDP connection on a fast interface can easily accumulate gigabytes of data in that time. (CVE-2021-28715) The timeout could even never trigger if the guest manages to have only one free slot in its RX queue ring page and the next package would require more than one free slot, which may be the case when using GSO, XDP, or software hashing. (CVE-2021-28714) |
| CVE-2021-28691 | Guest triggered use-after-free in Linux xen-netback A malicious or buggy network PV frontend can force Linux netback to disable the interface and terminate the receive kernel thread associated with queue 0 in response to the frontend sending a malformed packet. Such kernel thread termination will lead to a use-after-free in Linux netback when the backend is destroyed, as the kernel thread associated with queue 0 will have already exited and thus the call to kthread_stop will be performed against a stale pointer. |
| CVE-2021-28660 | rtw_wx_set_scan in drivers/staging/rtl8188eu/os_dep/ioctl_linux.c in the Linux kernel through 5.11.6 allows writing beyond the end of the ->ssid[] array. NOTE: from the perspective of kernel.org releases, CVE IDs are not normally used for drivers/staging/* (unfinished work); however, system integrators may have situations in which a drivers/staging issue is relevant to their own customer base. |
| CVE-2021-28375 | An issue was discovered in the Linux kernel through 5.11.6. fastrpc_internal_invoke in drivers/misc/fastrpc.c does not prevent user applications from sending kernel RPC messages, aka CID-20c40794eb85. This is a related issue to CVE-2019-2308. |
| CVE-2021-28039 | An issue was discovered in the Linux kernel 5.9.x through 5.11.3, as used with Xen. In some less-common configurations, an x86 PV guest OS user can crash a Dom0 or driver domain via a large amount of I/O activity. The issue relates to misuse of guest physical addresses when a configuration has CONFIG_XEN_UNPOPULATED_ALLOC but not CONFIG_XEN_BALLOON_MEMORY_HOTPLUG. |
| CVE-2021-28038 | An issue was discovered in the Linux kernel through 5.11.3, as used with Xen PV. A certain part of the netback driver lacks necessary treatment of errors such as failed memory allocations (as a result of changes to the handling of grant mapping errors). A host OS denial of service may occur during misbehavior of a networking frontend driver. NOTE: this issue exists because of an incomplete fix for CVE-2021-26931. |
| CVE-2021-27365 | An issue was discovered in the Linux kernel through 5.11.3. Certain iSCSI data structures do not have appropriate length constraints or checks, and can exceed the PAGE_SIZE value. An unprivileged user can send a Netlink message that is associated with iSCSI, and has a length up to the maximum length of a Netlink message. |
| CVE-2021-27364 | An issue was discovered in the Linux kernel through 5.11.3. drivers/scsi/scsi_transport_iscsi.c is adversely affected by the ability of an unprivileged user to craft Netlink messages. |
| CVE-2021-27363 | An issue was discovered in the Linux kernel through 5.11.3. A kernel pointer leak can be used to determine the address of the iscsi_transport structure. When an iSCSI transport is registered with the iSCSI subsystem, the transport's handle is available to unprivileged users via the sysfs file system, at /sys/class/iscsi_transport/$TRANSPORT_NAME/handle. When read, the show_transport_handle function (in drivers/scsi/scsi_transport_iscsi.c) is called, which leaks the handle. This handle is actually the pointer to an iscsi_transport struct in the kernel module's global variables. |
| CVE-2021-26934 | An issue was discovered in the Linux kernel 4.18 through 5.10.16, as used by Xen. The backend allocation (aka be-alloc) mode of the drm_xen_front drivers was not meant to be a supported configuration, but this wasn't stated accordingly in its support status entry. |
| CVE-2021-26932 | An issue was discovered in the Linux kernel 3.2 through 5.10.16, as used by Xen. Grant mapping operations often occur in batch hypercalls, where a number of operations are done in a single hypercall, the success or failure of each one is reported to the backend driver, and the backend driver then loops over the results, performing follow-up actions based on the success or failure of each operation. Unfortunately, when running in PV mode, the Linux backend drivers mishandle this: Some errors are ignored, effectively implying their success from the success of related batch elements. In other cases, errors resulting from one batch element lead to further batch elements not being inspected, and hence successful ones to not be possible to properly unmap upon error recovery. Only systems with Linux backends running in PV mode are vulnerable. Linux backends run in HVM / PVH modes are not vulnerable. This affects arch/*/xen/p2m.c and drivers/xen/gntdev.c. |
| CVE-2021-26931 | An issue was discovered in the Linux kernel 2.6.39 through 5.10.16, as used in Xen. Block, net, and SCSI backends consider certain errors a plain bug, deliberately causing a kernel crash. For errors potentially being at least under the influence of guests (such as out of memory conditions), it isn't correct to assume a plain bug. Memory allocations potentially causing such crashes occur only when Linux is running in PV mode, though. This affects drivers/block/xen-blkback/blkback.c and drivers/xen/xen-scsiback.c. |
| CVE-2021-26930 | An issue was discovered in the Linux kernel 3.11 through 5.10.16, as used by Xen. To service requests to the PV backend, the driver maps grant references provided by the frontend. In this process, errors may be encountered. In one case, an error encountered earlier might be discarded by later processing, resulting in the caller assuming successful mapping, and hence subsequent operations trying to access space that wasn't mapped. In another case, internal state would be insufficiently updated, preventing safe recovery from the error. This affects drivers/block/xen-blkback/blkback.c. |
| CVE-2021-26708 | A local privilege escalation was discovered in the Linux kernel before 5.10.13. Multiple race conditions in the AF_VSOCK implementation are caused by wrong locking in net/vmw_vsock/af_vsock.c. The race conditions were implicitly introduced in the commits that added VSOCK multi-transport support. |
| CVE-2021-23134 | Use After Free vulnerability in nfc sockets in the Linux Kernel before 5.12.4 allows local attackers to elevate their privileges. In typical configurations, the issue can only be triggered by a privileged local user with the CAP_NET_RAW capability. |
| CVE-2021-23133 | A race condition in Linux kernel SCTP sockets (net/sctp/socket.c) before 5.12-rc8 can lead to kernel privilege escalation from the context of a network service or an unprivileged process. If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock then an element is removed from the auto_asconf_splist list without any proper locking. This can be exploited by an attacker with network service privileges to escalate to root or from the context of an unprivileged user directly if a BPF_CGROUP_INET_SOCK_CREATE is attached which denies creation of some SCTP socket. |
| CVE-2021-22600 | A double free bug in packet_set_ring() in net/packet/af_packet.c can be exploited by a local user through crafted syscalls to escalate privileges or deny service. We recommend upgrading kernel past the effected versions or rebuilding past ec6af094ea28f0f2dda1a6a33b14cd57e36a9755 |
| CVE-2021-22555 | A heap out-of-bounds write affecting Linux since v2.6.19-rc1 was discovered in net/netfilter/x_tables.c. This allows an attacker to gain privileges or cause a DoS (via heap memory corruption) through user name space |
| CVE-2021-21781 | An information disclosure vulnerability exists in the ARM SIGPAGE functionality of Linux Kernel v5.4.66 and v5.4.54. The latest version (5.11-rc4) seems to still be vulnerable. A userland application can read the contents of the sigpage, which can leak kernel memory contents. An attacker can read a process’s memory at a specific offset to trigger this vulnerability. This was fixed in kernel releases: 4.14.222 4.19.177 5.4.99 5.10.17 5.11 |
| CVE-2021-20322 | A flaw in the processing of received ICMP errors (ICMP fragment needed and ICMP redirect) in the Linux kernel functionality was found to allow the ability to quickly scan open UDP ports. This flaw allows an off-path remote user to effectively bypass the source port UDP randomization. The highest threat from this vulnerability is to confidentiality and possibly integrity, because software that relies on UDP source port randomization are indirectly affected as well. |
| CVE-2021-20321 | A race condition accessing file object in the Linux kernel OverlayFS subsystem was found in the way users do rename in specific way with OverlayFS. A local user could use this flaw to crash the system. |
| CVE-2021-20320 | A flaw was found in s390 eBPF JIT in bpf_jit_insn in arch/s390/net/bpf_jit_comp.c in the Linux kernel. In this flaw, a local attacker with special user privilege can circumvent the verifier and may lead to a confidentiality problem. |
| CVE-2021-20317 | A flaw was found in the Linux kernel. A corrupted timer tree caused the task wakeup to be missing in the timerqueue_add function in lib/timerqueue.c. This flaw allows a local attacker with special user privileges to cause a denial of service, slowing and eventually stopping the system while running OSP. |
| CVE-2021-20292 | There is a flaw reported in the Linux kernel in versions before 5.9 in drivers/gpu/drm/nouveau/nouveau_sgdma.c in nouveau_sgdma_create_ttm in Nouveau DRM subsystem. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker with a local account with a root privilege, can leverage this vulnerability to escalate privileges and execute code in the context of the kernel. |
| CVE-2021-20268 | An out-of-bounds access flaw was found in the Linux kernel's implementation of the eBPF code verifier in the way a user running the eBPF script calls dev_map_init_map or sock_map_alloc. This flaw allows a local user to crash the system or possibly escalate their privileges. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. |
| CVE-2021-20265 | A flaw was found in the way memory resources were freed in the unix_stream_recvmsg function in the Linux kernel when a signal was pending. This flaw allows an unprivileged local user to crash the system by exhausting available memory. The highest threat from this vulnerability is to system availability. |
| CVE-2021-20261 | A race condition was found in the Linux kernels implementation of the floppy disk drive controller driver software. The impact of this issue is lessened by the fact that the default permissions on the floppy device (/dev/fd0) are restricted to root. If the permissions on the device have changed the impact changes greatly. In the default configuration root (or equivalent) permissions are required to attack this flaw. |
| CVE-2021-20239 | A flaw was found in the Linux kernel in versions before 5.4.92 in the BPF protocol. This flaw allows an attacker with a local account to leak information about kernel internal addresses. The highest threat from this vulnerability is to confidentiality. |
| CVE-2021-20226 | A use-after-free flaw was found in the io_uring in Linux kernel, where a local attacker with a user privilege could cause a denial of service problem on the system The issue results from the lack of validating the existence of an object prior to performing operations on the object by not incrementing the file reference counter while in use. The highest threat from this vulnerability is to data integrity, confidentiality and system availability. |
| CVE-2021-20219 | A denial of service vulnerability was found in n_tty_receive_char_special in drivers/tty/n_tty.c of the Linux kernel. In this flaw a local attacker with a normal user privilege could delay the loop (due to a changing ldata->read_head, and a missing sanity check) and cause a threat to the system availability. |
| CVE-2021-20194 | There is a vulnerability in the linux kernel versions higher than 5.2 (if kernel compiled with config params CONFIG_BPF_SYSCALL=y , CONFIG_BPF=y , CONFIG_CGROUPS=y , CONFIG_CGROUP_BPF=y , CONFIG_HARDENED_USERCOPY not set, and BPF hook to getsockopt is registered). As result of BPF execution, the local user can trigger bug in __cgroup_bpf_run_filter_getsockopt() function that can lead to heap overflow (because of non-hardened usercopy). The impact of attack could be deny of service or possibly privileges escalation. |
| CVE-2021-20177 | A flaw was found in the Linux kernel's implementation of string matching within a packet. A privileged user (with root or CAP_NET_ADMIN) when inserting iptables rules could insert a rule which can panic the system. Kernel before kernel 5.5-rc1 is affected. |
| CVE-2021-1114 | NVIDIA Linux kernel distributions contain a vulnerability in the kernel crypto node, where use after free may lead to complete denial of service. |
| CVE-2021-1112 | NVIDIA Linux kernel distributions contain a vulnerability in nvmap, where a null pointer dereference may lead to complete denial of service. |
| CVE-2021-1110 | NVIDIA Linux kernel distributions on Jetson Xavier contain a vulnerability in camera firmware where a user can change input data after validation, which may lead to complete denial of service and serious data corruption of all kernel components. |
| CVE-2021-1108 | NVIDIA Linux kernel distributions contain a vulnerability in FuSa Capture (VI/ISP), where integer underflow due to lack of input validation may lead to complete denial of service, partial integrity, and serious confidentiality loss for all processes in the system. |
| CVE-2021-1107 | NVIDIA Linux kernel distributions contain a vulnerability in nvmap NVMAP_IOC_WRITE* paths, where improper access controls may lead to code execution, complete denial of service, and seriously compromised integrity of all system components. |
| CVE-2021-1106 | NVIDIA Linux kernel distributions contain a vulnerability in nvmap, where writes may be allowed to read-only buffers, which may result in escalation of privileges, complete denial of service, unconstrained information disclosure, and serious data tampering of all processes on the system. |
| CVE-2021-1095 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer (nvlddmkm.sys) handlers for all control calls with embedded parameters where dereferencing an untrusted pointer may lead to denial of service. |
| CVE-2021-1094 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer (nvlddmkm.sys) handler for DxgkDdiEscape where an out of bounds array access may lead to denial of service or information disclosure. |
| CVE-2021-1090 | NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer (nvlddmkm.sys) handler for control calls where the software reads or writes to a buffer by using an index or pointer that references a memory location after the end of the buffer, which may lead to data tampering or denial of service. |
| CVE-2021-1076 | NVIDIA GPU Display Driver for Windows and Linux, all versions, contains a vulnerability in the kernel mode layer (nvlddmkm.sys or nvidia.ko) where improper access control may lead to denial of service, information disclosure, or data corruption. |
| CVE-2021-1056 | NVIDIA GPU Display Driver for Linux, all versions, contains a vulnerability in the kernel mode layer (nvidia.ko) in which it does not completely honor operating system file system permissions to provide GPU device-level isolation, which may lead to denial of service or information disclosure. |
| CVE-2021-1053 | NVIDIA GPU Display Driver for Windows and Linux, all versions, contains a vulnerability in the kernel mode layer (nvlddmkm.sys) handler for DxgkDdiEscape or IOCTL in which improper validation of a user pointer may lead to denial of service. |
| CVE-2021-1052 | NVIDIA GPU Display Driver for Windows and Linux, all versions, contains a vulnerability in the kernel mode layer (nvlddmkm.sys) handler for DxgkDdiEscape or IOCTL in which user-mode clients can access legacy privileged APIs, which may lead to denial of service, escalation of privileges, and information disclosure. |
| CVE-2021-0920 | In unix_scm_to_skb of af_unix.c, there is a possible use after free bug due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-196926917References: Upstream kernel |
| CVE-2020-9391 | An issue was discovered in the Linux kernel 5.4 and 5.5 through 5.5.6 on the AArch64 architecture. It ignores the top byte in the address passed to the brk system call, potentially moving the memory break downwards when the application expects it to move upwards, aka CID-dcde237319e6. This has been observed to cause heap corruption with the GNU C Library malloc implementation. |
| CVE-2020-9383 | An issue was discovered in the Linux kernel 3.16 through 5.5.6. set_fdc in drivers/block/floppy.c leads to a wait_til_ready out-of-bounds read because the FDC index is not checked for errors before assigning it, aka CID-2e90ca68b0d2. |
| CVE-2020-8992 | ext4_protect_reserved_inode in fs/ext4/block_validity.c in the Linux kernel through 5.5.3 allows attackers to cause a denial of service (soft lockup) via a crafted journal size. |
| CVE-2020-8835 | In the Linux kernel 5.5.0 and newer, the bpf verifier (kernel/bpf/verifier.c) did not properly restrict the register bounds for 32-bit operations, leading to out-of-bounds reads and writes in kernel memory. The vulnerability also affects the Linux 5.4 stable series, starting with v5.4.7, as the introducing commit was backported to that branch. This vulnerability was fixed in 5.6.1, 5.5.14, and 5.4.29. (issue is aka ZDI-CAN-10780) |
| CVE-2020-8834 | KVM in the Linux kernel on Power8 processors has a conflicting use of HSTATE_HOST_R1 to store r1 state in kvmppc_hv_entry plus in kvmppc_{save,restore}_tm, leading to a stack corruption. Because of this, an attacker with the ability run code in kernel space of a guest VM can cause the host kernel to panic. There were two commits that, according to the reporter, introduced the vulnerability: f024ee098476 ("KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures") 87a11bb6a7f7 ("KVM: PPC: Book3S HV: Work around XER[SO] bug in fake suspend mode") The former landed in 4.8, the latter in 4.17. This was fixed without realizing the impact in 4.18 with the following three commits, though it's believed the first is the only strictly necessary commit: 6f597c6b63b6 ("KVM: PPC: Book3S PR: Add guest MSR parameter for kvmppc_save_tm()/kvmppc_restore_tm()") 7b0e827c6970 ("KVM: PPC: Book3S HV: Factor fake-suspend handling out of kvmppc_save/restore_tm") 009c872a8bc4 ("KVM: PPC: Book3S PR: Move kvmppc_save_tm/kvmppc_restore_tm to separate file") |
| CVE-2020-8832 | The fix for the Linux kernel in Ubuntu 18.04 LTS for CVE-2019-14615 ("The Linux kernel did not properly clear data structures on context switches for certain Intel graphics processors.") was discovered to be incomplete, meaning that in versions of the kernel before 4.15.0-91.92, an attacker could use this vulnerability to expose sensitive information. |
| CVE-2020-8694 | Insufficient access control in the Linux kernel driver for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access. |
| CVE-2020-8649 | There is a use-after-free vulnerability in the Linux kernel through 5.5.2 in the vgacon_invert_region function in drivers/video/console/vgacon.c. |
| CVE-2020-8648 | There is a use-after-free vulnerability in the Linux kernel through 5.5.2 in the n_tty_receive_buf_common function in drivers/tty/n_tty.c. |
| CVE-2020-8647 | There is a use-after-free vulnerability in the Linux kernel through 5.5.2 in the vc_do_resize function in drivers/tty/vt/vt.c. |
| CVE-2020-8428 | fs/namei.c in the Linux kernel before 5.5 has a may_create_in_sticky use-after-free, which allows local users to cause a denial of service (OOPS) or possibly obtain sensitive information from kernel memory, aka CID-d0cb50185ae9. One attack vector may be an open system call for a UNIX domain socket, if the socket is being moved to a new parent directory and its old parent directory is being removed. |
| CVE-2020-7053 | In the Linux kernel 4.14 longterm through 4.14.165 and 4.19 longterm through 4.19.96 (and 5.x before 5.2), there is a use-after-free (write) in the i915_ppgtt_close function in drivers/gpu/drm/i915/i915_gem_gtt.c, aka CID-7dc40713618c. This is related to i915_gem_context_destroy_ioctl in drivers/gpu/drm/i915/i915_gem_context.c. |
| CVE-2020-5291 | Bubblewrap (bwrap) before version 0.4.1, if installed in setuid mode and the kernel supports unprivileged user namespaces, then the `bwrap --userns2` option can be used to make the setuid process keep running as root while being traceable. This can in turn be used to gain root permissions. Note that this only affects the combination of bubblewrap in setuid mode (which is typically used when unprivileged user namespaces are not supported) and the support of unprivileged user namespaces. Known to be affected are: * Debian testing/unstable, if unprivileged user namespaces enabled (not default) * Debian buster-backports, if unprivileged user namespaces enabled (not default) * Arch if using `linux-hardened`, if unprivileged user namespaces enabled (not default) * Centos 7 flatpak COPR, if unprivileged user namespaces enabled (not default) This has been fixed in the 0.4.1 release, and all affected users should update. |
| CVE-2020-36788 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: avoid a use-after-free when BO init fails nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code back to the caller. On failures, ttm_bo_init() invokes the provided destructor which should de-initialize and free the memory. Thus, when nouveau_bo_init() returns an error the gem object has already been released and the memory freed by nouveau_bo_del_ttm(). |
| CVE-2020-36787 | In the Linux kernel, the following vulnerability has been resolved: media: aspeed: fix clock handling logic Video engine uses eclk and vclk for its clock sources and its reset control is coupled with eclk so the current clock enabling sequence works like below. Enable eclk De-assert Video Engine reset 10ms delay Enable vclk It introduces improper reset on the Video Engine hardware and eventually the hardware generates unexpected DMA memory transfers that can corrupt memory region in random and sporadic patterns. This issue is observed very rarely on some specific AST2500 SoCs but it causes a critical kernel panic with making a various shape of signature so it's extremely hard to debug. Moreover, the issue is observed even when the video engine is not actively used because udevd turns on the video engine hardware for a short time to make a query in every boot. To fix this issue, this commit changes the clock handling logic to make the reset de-assertion triggered after enabling both eclk and vclk. Also, it adds clk_unprepare call for a case when probe fails. clk: ast2600: fix reset settings for eclk and vclk Video engine reset setting should be coupled with eclk to match it with the setting for previous Aspeed SoCs which is defined in clk-aspeed.c since all Aspeed SoCs are sharing a single video engine driver. Also, reset bit 6 is defined as 'Video Engine' reset in datasheet so it should be de-asserted when eclk is enabled. This commit fixes the setting. |
| CVE-2020-36786 | In the Linux kernel, the following vulnerability has been resolved: media: [next] staging: media: atomisp: fix memory leak of object flash In the case where the call to lm3554_platform_data_func returns an error there is a memory leak on the error return path of object flash. Fix this by adding an error return path that will free flash and rename labels fail2 to fail3 and fail1 to fail2. |
| CVE-2020-36785 | In the Linux kernel, the following vulnerability has been resolved: media: atomisp: Fix use after free in atomisp_alloc_css_stat_bufs() The "s3a_buf" is freed along with all the other items on the "asd->s3a_stats" list. It leads to a double free and a use after free. |
| CVE-2020-36784 | In the Linux kernel, the following vulnerability has been resolved: i2c: cadence: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in functions cdns_i2c_master_xfer and cdns_reg_slave. However, pm_runtime_get_sync will increment pm usage counter even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. |
| CVE-2020-36783 | In the Linux kernel, the following vulnerability has been resolved: i2c: img-scb: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in functions img_i2c_xfer and img_i2c_init. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. |
| CVE-2020-36782 | In the Linux kernel, the following vulnerability has been resolved: i2c: imx-lpi2c: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in lpi2c_imx_master_enable. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. |
| CVE-2020-36781 | In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix reference leak when pm_runtime_get_sync fails In i2c_imx_xfer() and i2c_imx_remove(), the pm reference count is not expected to be incremented on return. However, pm_runtime_get_sync will increment pm reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. |
| CVE-2020-36780 | In the Linux kernel, the following vulnerability has been resolved: i2c: sprd: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in sprd_i2c_master_xfer() and sprd_i2c_remove(). However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. |
| CVE-2020-36779 | In the Linux kernel, the following vulnerability has been resolved: i2c: stm32f7: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in these stm32f7_i2c_xx serious functions. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. |
| CVE-2020-36778 | In the Linux kernel, the following vulnerability has been resolved: i2c: xiic: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in xiic_xfer and xiic_i2c_remove. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. |
| CVE-2020-36777 | In the Linux kernel, the following vulnerability has been resolved: media: dvbdev: Fix memory leak in dvb_media_device_free() dvb_media_device_free() is leaking memory. Free `dvbdev->adapter->conn` before setting it to NULL, as documented in include/media/media-device.h: "The media_entity instance itself must be freed explicitly by the driver if required." |
| CVE-2020-36776 | In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/cpufreq_cooling: Fix slab OOB issue Slab OOB issue is scanned by KASAN in cpu_power_to_freq(). If power is limited below the power of OPP0 in EM table, it will cause slab out-of-bound issue with negative array index. Return the lowest frequency if limited power cannot found a suitable OPP in EM table to fix this issue. Backtrace: [<ffffffd02d2a37f0>] die+0x104/0x5ac [<ffffffd02d2a5630>] bug_handler+0x64/0xd0 [<ffffffd02d288ce4>] brk_handler+0x160/0x258 [<ffffffd02d281e5c>] do_debug_exception+0x248/0x3f0 [<ffffffd02d284488>] el1_dbg+0x14/0xbc [<ffffffd02d75d1d4>] __kasan_report+0x1dc/0x1e0 [<ffffffd02d75c2e0>] kasan_report+0x10/0x20 [<ffffffd02d75def8>] __asan_report_load8_noabort+0x18/0x28 [<ffffffd02e6fce5c>] cpufreq_power2state+0x180/0x43c [<ffffffd02e6ead80>] power_actor_set_power+0x114/0x1d4 [<ffffffd02e6fac24>] allocate_power+0xaec/0xde0 [<ffffffd02e6f9f80>] power_allocator_throttle+0x3ec/0x5a4 [<ffffffd02e6ea888>] handle_thermal_trip+0x160/0x294 [<ffffffd02e6edd08>] thermal_zone_device_check+0xe4/0x154 [<ffffffd02d351cb4>] process_one_work+0x5e4/0xe28 [<ffffffd02d352f44>] worker_thread+0xa4c/0xfac [<ffffffd02d360124>] kthread+0x33c/0x358 [<ffffffd02d289940>] ret_from_fork+0xc/0x18 |
| CVE-2020-36775 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential deadlock Using f2fs_trylock_op() in f2fs_write_compressed_pages() to avoid potential deadlock like we did in f2fs_write_single_data_page(). |
| CVE-2020-36766 | An issue was discovered in the Linux kernel before 5.8.6. drivers/media/cec/core/cec-api.c leaks one byte of kernel memory on specific hardware to unprivileged users, because of directly assigning log_addrs with a hole in the struct. |
| CVE-2020-36694 | An issue was discovered in netfilter in the Linux kernel before 5.10. There can be a use-after-free in the packet processing context, because the per-CPU sequence count is mishandled during concurrent iptables rules replacement. This could be exploited with the CAP_NET_ADMIN capability in an unprivileged namespace. NOTE: cc00bca was reverted in 5.12. |
| CVE-2020-36691 | An issue was discovered in the Linux kernel before 5.8. lib/nlattr.c allows attackers to cause a denial of service (unbounded recursion) via a nested Netlink policy with a back reference. |
| CVE-2020-36558 | A race condition in the Linux kernel before 5.5.7 involving VT_RESIZEX could lead to a NULL pointer dereference and general protection fault. |
| CVE-2020-36557 | A race condition in the Linux kernel before 5.6.2 between the VT_DISALLOCATE ioctl and closing/opening of ttys could lead to a use-after-free. |
| CVE-2020-36516 | An issue was discovered in the Linux kernel through 5.16.11. The mixed IPID assignment method with the hash-based IPID assignment policy allows an off-path attacker to inject data into a victim's TCP session or terminate that session. |
| CVE-2020-36387 | An issue was discovered in the Linux kernel before 5.8.2. fs/io_uring.c has a use-after-free related to io_async_task_func and ctx reference holding, aka CID-6d816e088c35. |
| CVE-2020-36386 | An issue was discovered in the Linux kernel before 5.8.1. net/bluetooth/hci_event.c has a slab out-of-bounds read in hci_extended_inquiry_result_evt, aka CID-51c19bf3d5cf. |
| CVE-2020-36385 | An issue was discovered in the Linux kernel before 5.10. drivers/infiniband/core/ucma.c has a use-after-free because the ctx is reached via the ctx_list in some ucma_migrate_id situations where ucma_close is called, aka CID-f5449e74802c. |
| CVE-2020-36322 | An issue was discovered in the FUSE filesystem implementation in the Linux kernel before 5.10.6, aka CID-5d069dbe8aaf. fuse_do_getattr() calls make_bad_inode() in inappropriate situations, causing a system crash. NOTE: the original fix for this vulnerability was incomplete, and its incompleteness is tracked as CVE-2021-28950. |
| CVE-2020-36313 | An issue was discovered in the Linux kernel before 5.7. The KVM subsystem allows out-of-range access to memslots after a deletion, aka CID-0774a964ef56. This affects arch/s390/kvm/kvm-s390.c, include/linux/kvm_host.h, and virt/kvm/kvm_main.c. |
| CVE-2020-36312 | An issue was discovered in the Linux kernel before 5.8.10. virt/kvm/kvm_main.c has a kvm_io_bus_unregister_dev memory leak upon a kmalloc failure, aka CID-f65886606c2d. |
| CVE-2020-36311 | An issue was discovered in the Linux kernel before 5.9. arch/x86/kvm/svm/sev.c allows attackers to cause a denial of service (soft lockup) by triggering destruction of a large SEV VM (which requires unregistering many encrypted regions), aka CID-7be74942f184. |
| CVE-2020-36310 | An issue was discovered in the Linux kernel before 5.8. arch/x86/kvm/svm/svm.c allows a set_memory_region_test infinite loop for certain nested page faults, aka CID-e72436bc3a52. |
| CVE-2020-36158 | mwifiex_cmd_802_11_ad_hoc_start in drivers/net/wireless/marvell/mwifiex/join.c in the Linux kernel through 5.10.4 might allow remote attackers to execute arbitrary code via a long SSID value, aka CID-5c455c5ab332. |
| CVE-2020-35519 | An out-of-bounds (OOB) memory access flaw was found in x25_bind in net/x25/af_x25.c in the Linux kernel version v5.12-rc5. A bounds check failure allows a local attacker with a user account on the system to gain access to out-of-bounds memory, leading to a system crash or a leak of internal kernel information. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. |
| CVE-2020-35513 | A flaw incorrect umask during file or directory modification in the Linux kernel NFS (network file system) functionality was found in the way user create and delete object using NFSv4.2 or newer if both simultaneously accessing the NFS by the other process that is not using new NFSv4.2. A user with access to the NFS could use this flaw to starve the resources causing denial of service. |
| CVE-2020-35508 | A flaw possibility of race condition and incorrect initialization of the process id was found in the Linux kernel child/parent process identification handling while filtering signal handlers. A local attacker is able to abuse this flaw to bypass checks to send any signal to a privileged process. |
| CVE-2020-35499 | A NULL pointer dereference flaw in Linux kernel versions prior to 5.11 may be seen if sco_sock_getsockopt function in net/bluetooth/sco.c do not have a sanity check for a socket connection, when using BT_SNDMTU/BT_RCVMTU for SCO sockets. This could allow a local attacker with a special user privilege to crash the system (DOS) or leak kernel internal information. |
| CVE-2020-29661 | A locking issue was discovered in the tty subsystem of the Linux kernel through 5.9.13. drivers/tty/tty_jobctrl.c allows a use-after-free attack against TIOCSPGRP, aka CID-54ffccbf053b. |
| CVE-2020-29660 | A locking inconsistency issue was discovered in the tty subsystem of the Linux kernel through 5.9.13. drivers/tty/tty_io.c and drivers/tty/tty_jobctrl.c may allow a read-after-free attack against TIOCGSID, aka CID-c8bcd9c5be24. |
| CVE-2020-29569 | An issue was discovered in the Linux kernel through 5.10.1, as used with Xen through 4.14.x. The Linux kernel PV block backend expects the kernel thread handler to reset ring->xenblkd to NULL when stopped. However, the handler may not have time to run if the frontend quickly toggles between the states connect and disconnect. As a consequence, the block backend may re-use a pointer after it was freed. A misbehaving guest can trigger a dom0 crash by continuously connecting / disconnecting a block frontend. Privilege escalation and information leaks cannot be ruled out. This only affects systems with a Linux blkback. |
| CVE-2020-29534 | An issue was discovered in the Linux kernel before 5.9.3. io_uring takes a non-refcounted reference to the files_struct of the process that submitted a request, causing execve() to incorrectly optimize unshare_fd(), aka CID-0f2122045b94. |
| CVE-2020-29374 | An issue was discovered in the Linux kernel before 5.7.3, related to mm/gup.c and mm/huge_memory.c. The get_user_pages (aka gup) implementation, when used for a copy-on-write page, does not properly consider the semantics of read operations and therefore can grant unintended write access, aka CID-17839856fd58. |
| CVE-2020-29373 | An issue was discovered in fs/io_uring.c in the Linux kernel before 5.6. It unsafely handles the root directory during path lookups, and thus a process inside a mount namespace can escape to unintended filesystem locations, aka CID-ff002b30181d. |
| CVE-2020-29372 | An issue was discovered in do_madvise in mm/madvise.c in the Linux kernel before 5.6.8. There is a race condition between coredump operations and the IORING_OP_MADVISE implementation, aka CID-bc0c4d1e176e. |
| CVE-2020-29371 | An issue was discovered in romfs_dev_read in fs/romfs/storage.c in the Linux kernel before 5.8.4. Uninitialized memory leaks to userspace, aka CID-bcf85fcedfdd. |
| CVE-2020-29370 | An issue was discovered in kmem_cache_alloc_bulk in mm/slub.c in the Linux kernel before 5.5.11. The slowpath lacks the required TID increment, aka CID-fd4d9c7d0c71. |
| CVE-2020-29369 | An issue was discovered in mm/mmap.c in the Linux kernel before 5.7.11. There is a race condition between certain expand functions (expand_downwards and expand_upwards) and page-table free operations from an munmap call, aka CID-246c320a8cfe. |
| CVE-2020-29368 | An issue was discovered in __split_huge_pmd in mm/huge_memory.c in the Linux kernel before 5.7.5. The copy-on-write implementation can grant unintended write access because of a race condition in a THP mapcount check, aka CID-c444eb564fb1. |
| CVE-2020-28974 | A slab-out-of-bounds read in fbcon in the Linux kernel before 5.9.7 could be used by local attackers to read privileged information or potentially crash the kernel, aka CID-3c4e0dff2095. This occurs because KD_FONT_OP_COPY in drivers/tty/vt/vt.c can be used for manipulations such as font height. |
| CVE-2020-28941 | An issue was discovered in drivers/accessibility/speakup/spk_ttyio.c in the Linux kernel through 5.9.9. Local attackers on systems with the speakup driver could cause a local denial of service attack, aka CID-d41227544427. This occurs because of an invalid free when the line discipline is used more than once. |
| CVE-2020-28915 | A buffer over-read (at the framebuffer layer) in the fbcon code in the Linux kernel before 5.8.15 could be used by local attackers to read kernel memory, aka CID-6735b4632def. |
| CVE-2020-28588 | An information disclosure vulnerability exists in the /proc/pid/syscall functionality of Linux Kernel 5.1 Stable and 5.4.66. More specifically, this issue has been introduced in v5.1-rc4 (commit 631b7abacd02b88f4b0795c08b54ad4fc3e7c7c0) and is still present in v5.10-rc4, so it’s likely that all versions in between are affected. An attacker can read /proc/pid/syscall to trigger this vulnerability, which leads to the kernel leaking memory contents. |
| CVE-2020-28374 | In drivers/target/target_core_xcopy.c in the Linux kernel before 5.10.7, insufficient identifier checking in the LIO SCSI target code can be used by remote attackers to read or write files via directory traversal in an XCOPY request, aka CID-2896c93811e3. For example, an attack can occur over a network if the attacker has access to one iSCSI LUN. The attacker gains control over file access because I/O operations are proxied via an attacker-selected backstore. |
| CVE-2020-28097 | The vgacon subsystem in the Linux kernel before 5.8.10 mishandles software scrollback. There is a vgacon_scrolldelta out-of-bounds read, aka CID-973c096f6a85. |
| CVE-2020-27835 | A use after free in the Linux kernel infiniband hfi1 driver in versions prior to 5.10-rc6 was found in the way user calls Ioctl after open dev file and fork. A local user could use this flaw to crash the system. |
| CVE-2020-27830 | A vulnerability was found in Linux Kernel where in the spk_ttyio_receive_buf2() function, it would dereference spk_ttyio_synth without checking whether it is NULL or not, and may lead to a NULL-ptr deref crash. |
| CVE-2020-27825 | A use-after-free flaw was found in kernel/trace/ring_buffer.c in Linux kernel (before 5.10-rc1). There was a race problem in trace_open and resize of cpu buffer running parallely on different cpus, may cause a denial of service problem (DOS). This flaw could even allow a local attacker with special user privilege to a kernel information leak threat. |
| CVE-2020-27820 | A vulnerability was found in Linux kernel, where a use-after-frees in nouveau's postclose() handler could happen if removing device (that is not common to remove video card physically without power-off, but same happens if "unbind" the driver). |
| CVE-2020-27815 | A flaw was found in the JFS filesystem code in the Linux Kernel which allows a local attacker with the ability to set extended attributes to panic the system, causing memory corruption or escalating privileges. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. |
| CVE-2020-27786 | A flaw was found in the Linux kernel’s implementation of MIDI, where an attacker with a local account and the permissions to issue ioctl commands to midi devices could trigger a use-after-free issue. A write to this specific memory while freed and before use causes the flow of execution to change and possibly allow for memory corruption or privilege escalation. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. |
| CVE-2020-27784 | A vulnerability was found in the Linux kernel, where accessing a deallocated instance in printer_ioctl() printer_ioctl() tries to access of a printer_dev instance. However, use-after-free arises because it had been freed by gprinter_free(). |
| CVE-2020-27777 | A flaw was found in the way RTAS handled memory accesses in userspace to kernel communication. On a locked down (usually due to Secure Boot) guest system running on top of PowerVM or KVM hypervisors (pseries platform) a root like local user could use this flaw to further increase their privileges to that of a running kernel. |
| CVE-2020-27675 | An issue was discovered in the Linux kernel through 5.9.1, as used with Xen through 4.14.x. drivers/xen/events/events_base.c allows event-channel removal during the event-handling loop (a race condition). This can cause a use-after-free or NULL pointer dereference, as demonstrated by a dom0 crash via events for an in-reconfiguration paravirtualized device, aka CID-073d0552ead5. |
| CVE-2020-27673 | An issue was discovered in the Linux kernel through 5.9.1, as used with Xen through 4.14.x. Guest OS users can cause a denial of service (host OS hang) via a high rate of events to dom0, aka CID-e99502f76271. |
| CVE-2020-27418 | A Use After Free vulnerability in Fedora Linux kernel 5.9.0-rc9 allows attackers to obatin sensitive information via vgacon_invert_region() function. |
| CVE-2020-27194 | An issue was discovered in the Linux kernel before 5.8.15. scalar32_min_max_or in kernel/bpf/verifier.c mishandles bounds tracking during use of 64-bit values, aka CID-5b9fbeb75b6a. |
| CVE-2020-27171 | An issue was discovered in the Linux kernel before 5.11.8. kernel/bpf/verifier.c has an off-by-one error (with a resultant integer underflow) affecting out-of-bounds speculation on pointer arithmetic, leading to side-channel attacks that defeat Spectre mitigations and obtain sensitive information from kernel memory, aka CID-10d2bb2e6b1d. |
| CVE-2020-27170 | An issue was discovered in the Linux kernel before 5.11.8. kernel/bpf/verifier.c performs undesirable out-of-bounds speculation on pointer arithmetic, leading to side-channel attacks that defeat Spectre mitigations and obtain sensitive information from kernel memory, aka CID-f232326f6966. This affects pointer types that do not define a ptr_limit. |
| CVE-2020-27152 | An issue was discovered in ioapic_lazy_update_eoi in arch/x86/kvm/ioapic.c in the Linux kernel before 5.9.2. It has an infinite loop related to improper interaction between a resampler and edge triggering, aka CID-77377064c3a9. |
| CVE-2020-26541 | The Linux kernel through 5.8.13 does not properly enforce the Secure Boot Forbidden Signature Database (aka dbx) protection mechanism. This affects certs/blacklist.c and certs/system_keyring.c. |
| CVE-2020-26147 | An issue was discovered in the Linux kernel 5.8.9. The WEP, WPA, WPA2, and WPA3 implementations reassemble fragments even though some of them were sent in plaintext. This vulnerability can be abused to inject packets and/or exfiltrate selected fragments when another device sends fragmented frames and the WEP, CCMP, or GCMP data-confidentiality protocol is used. |
| CVE-2020-26139 | An issue was discovered in the kernel in NetBSD 7.1. An Access Point (AP) forwards EAPOL frames to other clients even though the sender has not yet successfully authenticated to the AP. This might be abused in projected Wi-Fi networks to launch denial-of-service attacks against connected clients and makes it easier to exploit other vulnerabilities in connected clients. |
| CVE-2020-26088 | A missing CAP_NET_RAW check in NFC socket creation in net/nfc/rawsock.c in the Linux kernel before 5.8.2 could be used by local attackers to create raw sockets, bypassing security mechanisms, aka CID-26896f01467a. |
| CVE-2020-25705 | A flaw in ICMP packets in the Linux kernel may allow an attacker to quickly scan open UDP ports. This flaw allows an off-path remote attacker to effectively bypass source port UDP randomization. Software that relies on UDP source port randomization are indirectly affected as well on the Linux Based Products (RUGGEDCOM RM1224: All versions between v5.0 and v6.4, SCALANCE M-800: All versions between v5.0 and v6.4, SCALANCE S615: All versions between v5.0 and v6.4, SCALANCE SC-600: All versions prior to v2.1.3, SCALANCE W1750D: v8.3.0.1, v8.6.0, and v8.7.0, SIMATIC Cloud Connect 7: All versions, SIMATIC MV500 Family: All versions, SIMATIC NET CP 1243-1 (incl. SIPLUS variants): Versions 3.1.39 and later, SIMATIC NET CP 1243-7 LTE EU: Version |
| CVE-2020-25704 | A flaw memory leak in the Linux kernel performance monitoring subsystem was found in the way if using PERF_EVENT_IOC_SET_FILTER. A local user could use this flaw to starve the resources causing denial of service. |
| CVE-2020-25673 | A vulnerability was found in Linux kernel where non-blocking socket in llcp_sock_connect() leads to leak and eventually hanging-up the system. |
| CVE-2020-25672 | A memory leak vulnerability was found in Linux kernel in llcp_sock_connect |
| CVE-2020-25671 | A vulnerability was found in Linux Kernel, where a refcount leak in llcp_sock_connect() causing use-after-free which might lead to privilege escalations. |
| CVE-2020-25670 | A vulnerability was found in Linux Kernel where refcount leak in llcp_sock_bind() causing use-after-free which might lead to privilege escalations. |
| CVE-2020-25669 | A vulnerability was found in the Linux Kernel where the function sunkbd_reinit having been scheduled by sunkbd_interrupt before sunkbd being freed. Though the dangling pointer is set to NULL in sunkbd_disconnect, there is still an alias in sunkbd_reinit causing Use After Free. |
| CVE-2020-25668 | A flaw was found in Linux Kernel because access to the global variable fg_console is not properly synchronized leading to a use after free in con_font_op. |
| CVE-2020-25662 | A Red Hat only CVE-2020-12352 regression issue was found in the way the Linux kernel's Bluetooth stack implementation handled the initialization of stack memory when handling certain AMP packets. This flaw allows a remote attacker in an adjacent range to leak small portions of stack memory on the system by sending specially crafted AMP packets. The highest threat from this vulnerability is to data confidentiality. |
| CVE-2020-25661 | A Red Hat only CVE-2020-12351 regression issue was found in the way the Linux kernel's Bluetooth implementation handled L2CAP packets with A2MP CID. This flaw allows a remote attacker in an adjacent range to crash the system, causing a denial of service or potentially executing arbitrary code on the system by sending a specially crafted L2CAP packet. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. |
| CVE-2020-25656 | A flaw was found in the Linux kernel. A use-after-free was found in the way the console subsystem was using ioctls KDGKBSENT and KDSKBSENT. A local user could use this flaw to get read memory access out of bounds. The highest threat from this vulnerability is to data confidentiality. |
| CVE-2020-25645 | A flaw was found in the Linux kernel in versions before 5.9-rc7. Traffic between two Geneve endpoints may be unencrypted when IPsec is configured to encrypt traffic for the specific UDP port used by the GENEVE tunnel allowing anyone between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality. |
| CVE-2020-25643 | A flaw was found in the HDLC_PPP module of the Linux kernel in versions before 5.9-rc7. Memory corruption and a read overflow is caused by improper input validation in the ppp_cp_parse_cr function which can cause the system to crash or cause a denial of service. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability. |
| CVE-2020-25641 | A flaw was found in the Linux kernel's implementation of biovecs in versions before 5.9-rc7. A zero-length biovec request issued by the block subsystem could cause the kernel to enter an infinite loop, causing a denial of service. This flaw allows a local attacker with basic privileges to issue requests to a block device, resulting in a denial of service. The highest threat from this vulnerability is to system availability. |
| CVE-2020-25639 | A NULL pointer dereference flaw was found in the Linux kernel's GPU Nouveau driver functionality in versions prior to 5.12-rc1 in the way the user calls ioctl DRM_IOCTL_NOUVEAU_CHANNEL_ALLOC. This flaw allows a local user to crash the system. |
| CVE-2020-25285 | A race condition between hugetlb sysctl handlers in mm/hugetlb.c in the Linux kernel before 5.8.8 could be used by local attackers to corrupt memory, cause a NULL pointer dereference, or possibly have unspecified other impact, aka CID-17743798d812. |
| CVE-2020-25284 | The rbd block device driver in drivers/block/rbd.c in the Linux kernel through 5.8.9 used incomplete permission checking for access to rbd devices, which could be leveraged by local attackers to map or unmap rbd block devices, aka CID-f44d04e696fe. |
| CVE-2020-25221 | get_gate_page in mm/gup.c in the Linux kernel 5.7.x and 5.8.x before 5.8.7 allows privilege escalation because of incorrect reference counting (caused by gate page mishandling) of the struct page that backs the vsyscall page. The result is a refcount underflow. This can be triggered by any 64-bit process that can use ptrace() or process_vm_readv(), aka CID-9fa2dd946743. |
| CVE-2020-25220 | The Linux kernel 4.9.x before 4.9.233, 4.14.x before 4.14.194, and 4.19.x before 4.19.140 has a use-after-free because skcd->no_refcnt was not considered during a backport of a CVE-2020-14356 patch. This is related to the cgroups feature. |
| CVE-2020-25212 | A TOCTOU mismatch in the NFS client code in the Linux kernel before 5.8.3 could be used by local attackers to corrupt memory or possibly have unspecified other impact because a size check is in fs/nfs/nfs4proc.c instead of fs/nfs/nfs4xdr.c, aka CID-b4487b935452. |
| CVE-2020-25211 | In the Linux kernel through 5.8.7, local attackers able to inject conntrack netlink configuration could overflow a local buffer, causing crashes or triggering use of incorrect protocol numbers in ctnetlink_parse_tuple_filter in net/netfilter/nf_conntrack_netlink.c, aka CID-1cc5ef91d2ff. |
| CVE-2020-24490 | Improper buffer restrictions in BlueZ may allow an unauthenticated user to potentially enable denial of service via adjacent access. This affects all Linux kernel versions that support BlueZ. |
| CVE-2020-24485 | Improper conditions check in the Intel(R) FPGA OPAE Driver for Linux before kernel version 4.17 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| CVE-2020-24394 | In the Linux kernel before 5.7.8, fs/nfsd/vfs.c (in the NFS server) can set incorrect permissions on new filesystem objects when the filesystem lacks ACL support, aka CID-22cf8419f131. This occurs because the current umask is not considered. |
| CVE-2020-24385 | In MidnightBSD before 1.2.6 and 1.3 before August 2020, and FreeBSD before 7, a NULL pointer dereference was found in the Linux emulation layer that allows attackers to crash the running kernel. During binary interaction, td->td_emuldata in sys/compat/linux/linux_emul.h is not getting initialized and returns NULL from em_find(). |
| CVE-2020-1749 | A flaw was found in the Linux kernel's implementation of some networking protocols in IPsec, such as VXLAN and GENEVE tunnels over IPv6. When an encrypted tunnel is created between two hosts, the kernel isn't correctly routing tunneled data over the encrypted link; rather sending the data unencrypted. This would allow anyone in between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality. |
| CVE-2020-16166 | The Linux kernel through 5.7.11 allows remote attackers to make observations that help to obtain sensitive information about the internal state of the network RNG, aka CID-f227e3ec3b5c. This is related to drivers/char/random.c and kernel/time/timer.c. |
| CVE-2020-16119 | Use-after-free vulnerability in the Linux kernel exploitable by a local attacker due to reuse of a DCCP socket with an attached dccps_hc_tx_ccid object as a listener after being released. Fixed in Ubuntu Linux kernel 5.4.0-51.56, 5.3.0-68.63, 4.15.0-121.123, 4.4.0-193.224, 3.13.0.182.191 and 3.2.0-149.196. |
| CVE-2020-15852 | An issue was discovered in the Linux kernel 5.5 through 5.7.9, as used in Xen through 4.13.x for x86 PV guests. An attacker may be granted the I/O port permissions of an unrelated task. This occurs because tss_invalidate_io_bitmap mishandling causes a loss of synchronization between the I/O bitmaps of TSS and Xen, aka CID-cadfad870154. |
| CVE-2020-15780 | An issue was discovered in drivers/acpi/acpi_configfs.c in the Linux kernel before 5.7.7. Injection of malicious ACPI tables via configfs could be used by attackers to bypass lockdown and secure boot restrictions, aka CID-75b0cea7bf30. |
| CVE-2020-15707 | Integer overflows were discovered in the functions grub_cmd_initrd and grub_initrd_init in the efilinux component of GRUB2, as shipped in Debian, Red Hat, and Ubuntu (the functionality is not included in GRUB2 upstream), leading to a heap-based buffer overflow. These could be triggered by an extremely large number of arguments to the initrd command on 32-bit architectures, or a crafted filesystem with very large files on any architecture. An attacker could use this to execute arbitrary code and bypass UEFI Secure Boot restrictions. This issue affects GRUB2 version 2.04 and prior versions. |
| CVE-2020-15706 | GRUB2 contains a race condition in grub_script_function_create() leading to a use-after-free vulnerability which can be triggered by redefining a function whilst the same function is already executing, leading to arbitrary code execution and secure boot restriction bypass. This issue affects GRUB2 version 2.04 and prior versions. |
| CVE-2020-15705 | GRUB2 fails to validate kernel signature when booted directly without shim, allowing secure boot to be bypassed. This only affects systems where the kernel signing certificate has been imported directly into the secure boot database and the GRUB image is booted directly without the use of shim. This issue affects GRUB2 version 2.04 and prior versions. |
| CVE-2020-15590 | A vulnerability in the Private Internet Access (PIA) VPN Client for Linux 1.5 through 2.3+ allows remote attackers to bypass an intended VPN kill switch mechanism and read sensitive information via intercepting network traffic. Since 1.5, PIA has supported a “split tunnel” OpenVPN bypass option. The PIA killswitch & associated iptables firewall is designed to protect you while using the Internet. When the kill switch is configured to block all inbound and outbound network traffic, privileged applications can continue sending & receiving network traffic if net.ipv4.ip_forward has been enabled in the system kernel parameters. For example, a Docker container running on a host with the VPN turned off, and the kill switch turned on, can continue using the internet, leaking the host IP (CWE 200). In PIA 2.4.0+, policy-based routing is enabled by default and is used to direct all forwarded packets to the VPN interface automatically. |
| CVE-2020-15437 | The Linux kernel before version 5.8 is vulnerable to a NULL pointer dereference in drivers/tty/serial/8250/8250_core.c:serial8250_isa_init_ports() that allows local users to cause a denial of service by using the p->serial_in pointer which uninitialized. |
| CVE-2020-15436 | Use-after-free vulnerability in fs/block_dev.c in the Linux kernel before 5.8 allows local users to gain privileges or cause a denial of service by leveraging improper access to a certain error field. |
| CVE-2020-15393 | In the Linux kernel 4.4 through 5.7.6, usbtest_disconnect in drivers/usb/misc/usbtest.c has a memory leak, aka CID-28ebeb8db770. |
| CVE-2020-14416 | In the Linux kernel before 5.4.16, a race condition in tty->disc_data handling in the slip and slcan line discipline could lead to a use-after-free, aka CID-0ace17d56824. This affects drivers/net/slip/slip.c and drivers/net/can/slcan.c. |
| CVE-2020-14390 | A flaw was found in the Linux kernel in versions before 5.9-rc6. When changing screen size, an out-of-bounds memory write can occur leading to memory corruption or a denial of service. Due to the nature of the flaw, privilege escalation cannot be fully ruled out. |
| CVE-2020-14386 | A flaw was found in the Linux kernel before 5.9-rc4. Memory corruption can be exploited to gain root privileges from unprivileged processes. The highest threat from this vulnerability is to data confidentiality and integrity. |
| CVE-2020-14385 | A flaw was found in the Linux kernel before 5.9-rc4. A failure of the file system metadata validator in XFS can cause an inode with a valid, user-creatable extended attribute to be flagged as corrupt. This can lead to the filesystem being shutdown, or otherwise rendered inaccessible until it is remounted, leading to a denial of service. The highest threat from this vulnerability is to system availability. |
| CVE-2020-14381 | A flaw was found in the Linux kernel’s futex implementation. This flaw allows a local attacker to corrupt system memory or escalate their privileges when creating a futex on a filesystem that is about to be unmounted. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. |
| CVE-2020-14372 | A flaw was found in grub2 in versions prior to 2.06, where it incorrectly enables the usage of the ACPI command when Secure Boot is enabled. This flaw allows an attacker with privileged access to craft a Secondary System Description Table (SSDT) containing code to overwrite the Linux kernel lockdown variable content directly into memory. The table is further loaded and executed by the kernel, defeating its Secure Boot lockdown and allowing the attacker to load unsigned code. The highest threat from this vulnerability is to data confidentiality and integrity, as well as system availability. |
| CVE-2020-14356 | A flaw null pointer dereference in the Linux kernel cgroupv2 subsystem in versions before 5.7.10 was found in the way when reboot the system. A local user could use this flaw to crash the system or escalate their privileges on the system. |
| CVE-2020-14351 | A flaw was found in the Linux kernel. A use-after-free memory flaw was found in the perf subsystem allowing a local attacker with permission to monitor perf events to corrupt memory and possibly escalate privileges. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability. |
| CVE-2020-14314 | A memory out-of-bounds read flaw was found in the Linux kernel before 5.9-rc2 with the ext3/ext4 file system, in the way it accesses a directory with broken indexing. This flaw allows a local user to crash the system if the directory exists. The highest threat from this vulnerability is to system availability. |
| CVE-2020-14308 | In grub2 versions before 2.06 the grub memory allocator doesn't check for possible arithmetic overflows on the requested allocation size. This leads the function to return invalid memory allocations which can be further used to cause possible integrity, confidentiality and availability impacts during the boot process. |
| CVE-2020-14304 | A memory disclosure flaw was found in the Linux kernel's ethernet drivers, in the way it read data from the EEPROM of the device. This flaw allows a local user to read uninitialized values from the kernel memory. The highest threat from this vulnerability is to confidentiality. |
| CVE-2020-13974 | An issue was discovered in the Linux kernel 4.4 through 5.7.1. drivers/tty/vt/keyboard.c has an integer overflow if k_ascii is called several times in a row, aka CID-b86dab054059. NOTE: Members in the community argue that the integer overflow does not lead to a security issue in this case. |
| CVE-2020-13143 | gadget_dev_desc_UDC_store in drivers/usb/gadget/configfs.c in the Linux kernel 3.16 through 5.6.13 relies on kstrdup without considering the possibility of an internal '\0' value, which allows attackers to trigger an out-of-bounds read, aka CID-15753588bcd4. |
| CVE-2020-12888 | The VFIO PCI driver in the Linux kernel through 5.6.13 mishandles attempts to access disabled memory space. |
| CVE-2020-12826 | A signal access-control issue was discovered in the Linux kernel before 5.6.5, aka CID-7395ea4e65c2. Because exec_id in include/linux/sched.h is only 32 bits, an integer overflow can interfere with a do_notify_parent protection mechanism. A child process can send an arbitrary signal to a parent process in a different security domain. Exploitation limitations include the amount of elapsed time before an integer overflow occurs, and the lack of scenarios where signals to a parent process present a substantial operational threat. |
| CVE-2020-12771 | An issue was discovered in the Linux kernel through 5.6.11. btree_gc_coalesce in drivers/md/bcache/btree.c has a deadlock if a coalescing operation fails. |
| CVE-2020-12770 | An issue was discovered in the Linux kernel through 5.6.11. sg_write lacks an sg_remove_request call in a certain failure case, aka CID-83c6f2390040. |
| CVE-2020-12769 | An issue was discovered in the Linux kernel before 5.4.17. drivers/spi/spi-dw.c allows attackers to cause a panic via concurrent calls to dw_spi_irq and dw_spi_transfer_one, aka CID-19b61392c5a8. |
| CVE-2020-12768 | ** DISPUTED ** An issue was discovered in the Linux kernel before 5.6. svm_cpu_uninit in arch/x86/kvm/svm.c has a memory leak, aka CID-d80b64ff297e. NOTE: third parties dispute this issue because it's a one-time leak at the boot, the size is negligible, and it can't be triggered at will. |
| CVE-2020-12659 | An issue was discovered in the Linux kernel before 5.6.7. xdp_umem_reg in net/xdp/xdp_umem.c has an out-of-bounds write (by a user with the CAP_NET_ADMIN capability) because of a lack of headroom validation. |
| CVE-2020-12657 | An issue was discovered in the Linux kernel before 5.6.5. There is a use-after-free in block/bfq-iosched.c related to bfq_idle_slice_timer_body. |
| CVE-2020-12656 | ** DISPUTED ** gss_mech_free in net/sunrpc/auth_gss/gss_mech_switch.c in the rpcsec_gss_krb5 implementation in the Linux kernel through 5.6.10 lacks certain domain_release calls, leading to a memory leak. Note: This was disputed with the assertion that the issue does not grant any access not already available. It is a problem that on unloading a specific kernel module some memory is leaked, but loading kernel modules is a privileged operation. A user could also write a kernel module to consume any amount of memory they like and load that replicating the effect of this bug. |
| CVE-2020-12655 | An issue was discovered in xfs_agf_verify in fs/xfs/libxfs/xfs_alloc.c in the Linux kernel through 5.6.10. Attackers may trigger a sync of excessive duration via an XFS v5 image with crafted metadata, aka CID-d0c7feaf8767. |
| CVE-2020-12654 | An issue was found in Linux kernel before 5.5.4. mwifiex_ret_wmm_get_status() in drivers/net/wireless/marvell/mwifiex/wmm.c allows a remote AP to trigger a heap-based buffer overflow because of an incorrect memcpy, aka CID-3a9b153c5591. |
| CVE-2020-12653 | An issue was found in Linux kernel before 5.5.4. The mwifiex_cmd_append_vsie_tlv() function in drivers/net/wireless/marvell/mwifiex/scan.c allows local users to gain privileges or cause a denial of service because of an incorrect memcpy and buffer overflow, aka CID-b70261a288ea. |
| CVE-2020-12652 | The __mptctl_ioctl function in drivers/message/fusion/mptctl.c in the Linux kernel before 5.4.14 allows local users to hold an incorrect lock during the ioctl operation and trigger a race condition, i.e., a "double fetch" vulnerability, aka CID-28d76df18f0a. NOTE: the vendor states "The security impact of this bug is not as bad as it could have been because these operations are all privileged and root already has enormous destructive power." |
| CVE-2020-12465 | An array overflow was discovered in mt76_add_fragment in drivers/net/wireless/mediatek/mt76/dma.c in the Linux kernel before 5.5.10, aka CID-b102f0c522cf. An oversized packet with too many rx fragments can corrupt memory of adjacent pages. |
| CVE-2020-12464 | usb_sg_cancel in drivers/usb/core/message.c in the Linux kernel before 5.6.8 has a use-after-free because a transfer occurs without a reference, aka CID-056ad39ee925. |
| CVE-2020-12364 | Null pointer reference in some Intel(R) Graphics Drivers for Windows* before version 26.20.100.7212 and before version Linux kernel version 5.5 may allow a privileged user to potentially enable a denial of service via local access. |
| CVE-2020-12363 | Improper input validation in some Intel(R) Graphics Drivers for Windows* before version 26.20.100.7212 and before Linux kernel version 5.5 may allow a privileged user to potentially enable a denial of service via local access. |
| CVE-2020-12362 | Integer overflow in the firmware for some Intel(R) Graphics Drivers for Windows * before version 26.20.100.7212 and before Linux kernel version 5.5 may allow a privileged user to potentially enable an escalation of privilege via local access. |
| CVE-2020-12114 | A pivot_root race condition in fs/namespace.c in the Linux kernel 4.4.x before 4.4.221, 4.9.x before 4.9.221, 4.14.x before 4.14.178, 4.19.x before 4.19.119, and 5.x before 5.3 allows local users to cause a denial of service (panic) by corrupting a mountpoint reference counter. |
| CVE-2020-11884 | In the Linux kernel 4.19 through 5.6.7 on the s390 platform, code execution may occur because of a race condition, as demonstrated by code in enable_sacf_uaccess in arch/s390/lib/uaccess.c that fails to protect against a concurrent page table upgrade, aka CID-3f777e19d171. A crash could also occur. |
| CVE-2020-11725 | ** DISPUTED ** snd_ctl_elem_add in sound/core/control.c in the Linux kernel through 5.6.3 has a count=info->owner line, which later affects a private_size*count multiplication for unspecified "interesting side effects." NOTE: kernel engineers dispute this finding, because it could be relevant only if new callers were added that were unfamiliar with the misuse of the info->owner field to represent data unrelated to the "owner" concept. The existing callers, SNDRV_CTL_IOCTL_ELEM_ADD and SNDRV_CTL_IOCTL_ELEM_REPLACE, have been designed to misuse the info->owner field in a safe way. |
| CVE-2020-11669 | An issue was discovered in the Linux kernel before 5.2 on the powerpc platform. arch/powerpc/kernel/idle_book3s.S does not have save/restore functionality for PNV_POWERSAVE_AMR, PNV_POWERSAVE_UAMOR, and PNV_POWERSAVE_AMOR, aka CID-53a712bae5dd. |
| CVE-2020-11668 | In the Linux kernel before 5.6.1, drivers/media/usb/gspca/xirlink_cit.c (aka the Xirlink camera USB driver) mishandles invalid descriptors, aka CID-a246b4d54770. |
| CVE-2020-11609 | An issue was discovered in the stv06xx subsystem in the Linux kernel before 5.6.1. drivers/media/usb/gspca/stv06xx/stv06xx.c and drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c mishandle invalid descriptors, as demonstrated by a NULL pointer dereference, aka CID-485b06aadb93. |
| CVE-2020-11608 | An issue was discovered in the Linux kernel before 5.6.1. drivers/media/usb/gspca/ov519.c allows NULL pointer dereferences in ov511_mode_init_regs and ov518_mode_init_regs when there are zero endpoints, aka CID-998912346c0d. |
| CVE-2020-11565 | ** DISPUTED ** An issue was discovered in the Linux kernel through 5.6.2. mpol_parse_str in mm/mempolicy.c has a stack-based out-of-bounds write because an empty nodelist is mishandled during mount option parsing, aka CID-aa9f7d5172fa. NOTE: Someone in the security community disagrees that this is a vulnerability because the issue “is a bug in parsing mount options which can only be specified by a privileged user, so triggering the bug does not grant any powers not already held.”. |
| CVE-2020-11494 | An issue was discovered in slc_bump in drivers/net/can/slcan.c in the Linux kernel 3.16 through 5.6.2. It allows attackers to read uninitialized can_frame data, potentially containing sensitive information from kernel stack memory, if the configuration lacks CONFIG_INIT_STACK_ALL, aka CID-b9258a2cece4. |
| CVE-2020-10942 | In the Linux kernel before 5.5.8, get_raw_socket in drivers/vhost/net.c lacks validation of an sk_family field, which might allow attackers to trigger kernel stack corruption via crafted system calls. |
| CVE-2020-10781 | A flaw was found in the Linux Kernel before 5.8-rc6 in the ZRAM kernel module, where a user with a local account and the ability to read the /sys/class/zram-control/hot_add file can create ZRAM device nodes in the /dev/ directory. This read allocates kernel memory and is not accounted for a user that triggers the creation of that ZRAM device. With this vulnerability, continually reading the device may consume a large amount of system memory and cause the Out-of-Memory (OOM) killer to activate and terminate random userspace processes, possibly making the system inoperable. |
| CVE-2020-10774 | A memory disclosure flaw was found in the Linux kernel's versions before 4.18.0-193.el8 in the sysctl subsystem when reading the /proc/sys/kernel/rh_features file. This flaw allows a local user to read uninitialized values from the kernel memory. The highest threat from this vulnerability is to confidentiality. |
| CVE-2020-10773 | A stack information leak flaw was found in s390/s390x in the Linux kernel’s memory manager functionality, where it incorrectly writes to the /proc/sys/vm/cmm_timeout file. This flaw allows a local user to see the kernel data. |
| CVE-2020-10768 | A flaw was found in the Linux Kernel before 5.8-rc1 in the prctl() function, where it can be used to enable indirect branch speculation after it has been disabled. This call incorrectly reports it as being 'force disabled' when it is not and opens the system to Spectre v2 attacks. The highest threat from this vulnerability is to confidentiality. |
| CVE-2020-10767 | A flaw was found in the Linux kernel before 5.8-rc1 in the implementation of the Enhanced IBPB (Indirect Branch Prediction Barrier). The IBPB mitigation will be disabled when STIBP is not available or when the Enhanced Indirect Branch Restricted Speculation (IBRS) is available. This flaw allows a local attacker to perform a Spectre V2 style attack when this configuration is active. The highest threat from this vulnerability is to confidentiality. |
| CVE-2020-10766 | A logic bug flaw was found in Linux kernel before 5.8-rc1 in the implementation of SSBD. A bug in the logic handling allows an attacker with a local account to disable SSBD protection during a context switch when additional speculative execution mitigations are in place. This issue was introduced when the per task/process conditional STIPB switching was added on top of the existing SSBD switching. The highest threat from this vulnerability is to confidentiality. |
| CVE-2020-10757 | A flaw was found in the Linux Kernel in versions after 4.5-rc1 in the way mremap handled DAX Huge Pages. This flaw allows a local attacker with access to a DAX enabled storage to escalate their privileges on the system. |
| CVE-2020-10751 | A flaw was found in the Linux kernels SELinux LSM hook implementation before version 5.7, where it incorrectly assumed that an skb would only contain a single netlink message. The hook would incorrectly only validate the first netlink message in the skb and allow or deny the rest of the messages within the skb with the granted permission without further processing. |
| CVE-2020-10742 | A flaw was found in the Linux kernel. An index buffer overflow during Direct IO write leading to the NFS client to crash. In some cases, a reach out of the index after one memory allocation by kmalloc will cause a kernel panic. The highest threat from this vulnerability is to data confidentiality and system availability. |
| CVE-2020-10732 | A flaw was found in the Linux kernel's implementation of Userspace core dumps. This flaw allows an attacker with a local account to crash a trivial program and exfiltrate private kernel data. |
| CVE-2020-10720 | A flaw was found in the Linux kernel's implementation of GRO in versions before 5.2. This flaw allows an attacker with local access to crash the system. |
| CVE-2020-10713 | A flaw was found in grub2, prior to version 2.06. An attacker may use the GRUB 2 flaw to hijack and tamper the GRUB verification process. This flaw also allows the bypass of Secure Boot protections. In order to load an untrusted or modified kernel, an attacker would first need to establish access to the system such as gaining physical access, obtain the ability to alter a pxe-boot network, or have remote access to a networked system with root access. With this access, an attacker could then craft a string to cause a buffer overflow by injecting a malicious payload that leads to arbitrary code execution within GRUB. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability. |
| CVE-2020-10711 | A NULL pointer dereference flaw was found in the Linux kernel's SELinux subsystem in versions before 5.7. This flaw occurs while importing the Commercial IP Security Option (CIPSO) protocol's category bitmap into the SELinux extensible bitmap via the' ebitmap_netlbl_import' routine. While processing the CIPSO restricted bitmap tag in the 'cipso_v4_parsetag_rbm' routine, it sets the security attribute to indicate that the category bitmap is present, even if it has not been allocated. This issue leads to a NULL pointer dereference issue while importing the same category bitmap into SELinux. This flaw allows a remote network user to crash the system kernel, resulting in a denial of service. |
| CVE-2020-10690 | There is a use-after-free in kernel versions before 5.5 due to a race condition between the release of ptp_clock and cdev while resource deallocation. When a (high privileged) process allocates a ptp device file (like /dev/ptpX) and voluntarily goes to sleep. During this time if the underlying device is removed, it can cause an exploitable condition as the process wakes up to terminate and clean all attached files. The system crashes due to the cdev structure being invalid (as already freed) which is pointed to by the inode. |
| CVE-2020-0009 | In calc_vm_may_flags of ashmem.c, there is a possible arbitrary write to shared memory due to a permissions bypass. This could lead to local escalation of privilege by corrupting memory shared between processes, with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android kernel Android ID: A-142938932 |
| CVE-2019-9857 | In the Linux kernel through 5.0.2, the function inotify_update_existing_watch() in fs/notify/inotify/inotify_user.c neglects to call fsnotify_put_mark() with IN_MASK_CREATE after fsnotify_find_mark(), which will cause a memory leak (aka refcount leak). Finally, this will cause a denial of service. |
| CVE-2019-9445 | In the Android kernel in F2FS driver there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with system execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2019-9213 | In the Linux kernel before 4.20.14, expand_downwards in mm/mmap.c lacks a check for the mmap minimum address, which makes it easier for attackers to exploit kernel NULL pointer dereferences on non-SMAP platforms. This is related to a capability check for the wrong task. |
| CVE-2019-9162 | In the Linux kernel before 4.20.12, net/ipv4/netfilter/nf_nat_snmp_basic_main.c in the SNMP NAT module has insufficient ASN.1 length checks (aka an array index error), making out-of-bounds read and write operations possible, leading to an OOPS or local privilege escalation. This affects snmp_version and snmp_helper. |
| CVE-2019-9003 | In the Linux kernel before 4.20.5, attackers can trigger a drivers/char/ipmi/ipmi_msghandler.c use-after-free and OOPS by arranging for certain simultaneous execution of the code, as demonstrated by a "service ipmievd restart" loop. |
| CVE-2019-8980 | A memory leak in the kernel_read_file function in fs/exec.c in the Linux kernel through 4.20.11 allows attackers to cause a denial of service (memory consumption) by triggering vfs_read failures. |
| CVE-2019-8956 | In the Linux Kernel before versions 4.20.8 and 4.19.21 a use-after-free error in the "sctp_sendmsg()" function (net/sctp/socket.c) when handling SCTP_SENDALL flag can be exploited to corrupt memory. |
| CVE-2019-8912 | In the Linux kernel through 4.20.11, af_alg_release() in crypto/af_alg.c neglects to set a NULL value for a certain structure member, which leads to a use-after-free in sockfs_setattr. |
| CVE-2019-7308 | kernel/bpf/verifier.c in the Linux kernel before 4.20.6 performs undesirable out-of-bounds speculation on pointer arithmetic in various cases, including cases of different branches with different state or limits to sanitize, leading to side-channel attacks. |
| CVE-2019-7303 | A vulnerability in the seccomp filters of Canonical snapd before version 2.37.4 allows a strict mode snap to insert characters into a terminal on a 64-bit host. The seccomp rules were generated to match 64-bit ioctl(2) commands on a 64-bit platform; however, the Linux kernel only uses the lower 32 bits to determine which ioctl(2) commands to run. This issue affects: Canonical snapd versions prior to 2.37.4. |
| CVE-2019-7222 | The KVM implementation in the Linux kernel through 4.20.5 has an Information Leak. |
| CVE-2019-7221 | The KVM implementation in the Linux kernel through 4.20.5 has a Use-after-Free. |
| CVE-2019-6974 | In the Linux kernel before 4.20.8, kvm_ioctl_create_device in virt/kvm/kvm_main.c mishandles reference counting because of a race condition, leading to a use-after-free. |
| CVE-2019-6637 | On BIG-IP (ASM) 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, and 12.1.0-12.1.4, Application logic abuse of ASM REST endpoints can lead to instability of BIG-IP system. Exploitation of this issue causes excessive memory consumption which results in the Linux kernel triggering OOM killer on arbitrary processes. The attack requires an authenticated user with role of "Guest" or greater privilege. Note: "No Access" cannot login so technically it's a role but a user with this access role cannot perform the attack. |
| CVE-2019-5599 | In FreeBSD 12.0-STABLE before r349197 and 12.0-RELEASE before 12.0-RELEASE-p6, a bug in the non-default RACK TCP stack can allow an attacker to cause several linked lists to grow unbounded and cause an expensive list traversal on every packet being processed, leading to resource exhaustion and a denial of service. |
| CVE-2019-5489 | The mincore() implementation in mm/mincore.c in the Linux kernel through 4.19.13 allowed local attackers to observe page cache access patterns of other processes on the same system, potentially allowing sniffing of secret information. (Fixing this affects the output of the fincore program.) Limited remote exploitation may be possible, as demonstrated by latency differences in accessing public files from an Apache HTTP Server. |
| CVE-2019-5108 | An exploitable denial-of-service vulnerability exists in the Linux kernel prior to mainline 5.3. An attacker could exploit this vulnerability by triggering AP to send IAPP location updates for stations before the required authentication process has completed. This could lead to different denial-of-service scenarios, either by causing CAM table attacks, or by leading to traffic flapping if faking already existing clients in other nearby APs of the same wireless infrastructure. An attacker can forge Authentication and Association Request packets to trigger this vulnerability. |
| CVE-2019-3901 | A race condition in perf_event_open() allows local attackers to leak sensitive data from setuid programs. As no relevant locks (in particular the cred_guard_mutex) are held during the ptrace_may_access() call, it is possible for the specified target task to perform an execve() syscall with setuid execution before perf_event_alloc() actually attaches to it, allowing an attacker to bypass the ptrace_may_access() check and the perf_event_exit_task(current) call that is performed in install_exec_creds() during privileged execve() calls. This issue affects kernel versions before 4.8. |
| CVE-2019-3900 | An infinite loop issue was found in the vhost_net kernel module in Linux Kernel up to and including v5.1-rc6, while handling incoming packets in handle_rx(). It could occur if one end sends packets faster than the other end can process them. A guest user, maybe remote one, could use this flaw to stall the vhost_net kernel thread, resulting in a DoS scenario. |
| CVE-2019-3896 | A double-free can happen in idr_remove_all() in lib/idr.c in the Linux kernel 2.6 branch. An unprivileged local attacker can use this flaw for a privilege escalation or for a system crash and a denial of service (DoS). |
| CVE-2019-3882 | A flaw was found in the Linux kernel's vfio interface implementation that permits violation of the user's locked memory limit. If a device is bound to a vfio driver, such as vfio-pci, and the local attacker is administratively granted ownership of the device, it may cause a system memory exhaustion and thus a denial of service (DoS). Versions 3.10, 4.14 and 4.18 are vulnerable. |
| CVE-2019-3846 | A flaw that allowed an attacker to corrupt memory and possibly escalate privileges was found in the mwifiex kernel module while connecting to a malicious wireless network. |
| CVE-2019-3819 | A flaw was found in the Linux kernel in the function hid_debug_events_read() in drivers/hid/hid-debug.c file which may enter an infinite loop with certain parameters passed from a userspace. A local privileged user ("root") can cause a system lock up and a denial of service. Versions from v4.18 and newer are vulnerable. |
| CVE-2019-3701 | An issue was discovered in can_can_gw_rcv in net/can/gw.c in the Linux kernel through 4.19.13. The CAN frame modification rules allow bitwise logical operations that can be also applied to the can_dlc field. The privileged user "root" with CAP_NET_ADMIN can create a CAN frame modification rule that makes the data length code a higher value than the available CAN frame data size. In combination with a configured checksum calculation where the result is stored relatively to the end of the data (e.g. cgw_csum_xor_rel) the tail of the skb (e.g. frag_list pointer in skb_shared_info) can be rewritten which finally can cause a system crash. Because of a missing check, the CAN drivers may write arbitrary content beyond the data registers in the CAN controller's I/O memory when processing can-gw manipulated outgoing frames. |
| CVE-2019-3460 | A heap data infoleak in multiple locations including L2CAP_PARSE_CONF_RSP was found in the Linux kernel before 5.1-rc1. |
| CVE-2019-3459 | A heap address information leak while using L2CAP_GET_CONF_OPT was discovered in the Linux kernel before 5.1-rc1. |
| CVE-2019-3016 | In a Linux KVM guest that has PV TLB enabled, a process in the guest kernel may be able to read memory locations from another process in the same guest. This problem is limit to the host running linux kernel 4.10 with a guest running linux kernel 4.16 or later. The problem mainly affects AMD processors but Intel CPUs cannot be ruled out. |
| CVE-2019-25162 | In the Linux kernel, the following vulnerability has been resolved: i2c: Fix a potential use after free Free the adap structure only after we are done using it. This patch just moves the put_device() down a bit to avoid the use after free. [wsa: added comment to the code, added Fixes tag] |
| CVE-2019-25160 | In the Linux kernel, the following vulnerability has been resolved: netlabel: fix out-of-bounds memory accesses There are two array out-of-bounds memory accesses, one in cipso_v4_map_lvl_valid(), the other in netlbl_bitmap_walk(). Both errors are embarassingly simple, and the fixes are straightforward. As a FYI for anyone backporting this patch to kernels prior to v4.8, you'll want to apply the netlbl_bitmap_walk() patch to cipso_v4_bitmap_walk() as netlbl_bitmap_walk() doesn't exist before Linux v4.8. |
| CVE-2019-25045 | An issue was discovered in the Linux kernel before 5.0.19. The XFRM subsystem has a use-after-free, related to an xfrm_state_fini panic, aka CID-dbb2483b2a46. |
| CVE-2019-25044 | The block subsystem in the Linux kernel before 5.2 has a use-after-free that can lead to arbitrary code execution in the kernel context and privilege escalation, aka CID-c3e2219216c9. This is related to blk_mq_free_rqs and blk_cleanup_queue. |
| CVE-2019-2215 | A use-after-free in binder.c allows an elevation of privilege from an application to the Linux Kernel. No user interaction is required to exploit this vulnerability, however exploitation does require either the installation of a malicious local application or a separate vulnerability in a network facing application.Product: AndroidAndroid ID: A-141720095 |
| CVE-2019-2101 | In uvc_parse_standard_control of uvc_driver.c, there is a possible out-of-bound read due to improper input validation. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android kernel. Android ID: A-111760968. |
| CVE-2019-20934 | An issue was discovered in the Linux kernel before 5.2.6. On NUMA systems, the Linux fair scheduler has a use-after-free in show_numa_stats() because NUMA fault statistics are inappropriately freed, aka CID-16d51a590a8c. |
| CVE-2019-20908 | An issue was discovered in drivers/firmware/efi/efi.c in the Linux kernel before 5.4. Incorrect access permissions for the efivar_ssdt ACPI variable could be used by attackers to bypass lockdown or secure boot restrictions, aka CID-1957a85b0032. |
| CVE-2019-20812 | An issue was discovered in the Linux kernel before 5.4.7. The prb_calc_retire_blk_tmo() function in net/packet/af_packet.c can result in a denial of service (CPU consumption and soft lockup) in a certain failure case involving TPACKET_V3, aka CID-b43d1f9f7067. |
| CVE-2019-20811 | An issue was discovered in the Linux kernel before 5.0.6. In rx_queue_add_kobject() and netdev_queue_add_kobject() in net/core/net-sysfs.c, a reference count is mishandled, aka CID-a3e23f719f5c. |
| CVE-2019-20810 | go7007_snd_init in drivers/media/usb/go7007/snd-go7007.c in the Linux kernel before 5.6 does not call snd_card_free for a failure path, which causes a memory leak, aka CID-9453264ef586. |
| CVE-2019-20806 | An issue was discovered in the Linux kernel before 5.2. There is a NULL pointer dereference in tw5864_handle_frame() in drivers/media/pci/tw5864/tw5864-video.c, which may cause denial of service, aka CID-2e7682ebfc75. |
| CVE-2019-20794 | An issue was discovered in the Linux kernel 4.18 through 5.6.11 when unprivileged user namespaces are allowed. A user can create their own PID namespace, and mount a FUSE filesystem. Upon interaction with this FUSE filesystem, if the userspace component is terminated via a kill of the PID namespace's pid 1, it will result in a hung task, and resources being permanently locked up until system reboot. This can result in resource exhaustion. |
| CVE-2019-20636 | In the Linux kernel before 5.4.12, drivers/input/input.c has out-of-bounds writes via a crafted keycode table, as demonstrated by input_set_keycode, aka CID-cb222aed03d7. |
| CVE-2019-20422 | In the Linux kernel before 5.3.4, fib6_rule_lookup in net/ipv6/ip6_fib.c mishandles the RT6_LOOKUP_F_DST_NOREF flag in a reference-count decision, leading to (for example) a crash that was identified by syzkaller, aka CID-7b09c2d052db. |
| CVE-2019-20096 | In the Linux kernel before 5.1, there is a memory leak in __feat_register_sp() in net/dccp/feat.c, which may cause denial of service, aka CID-1d3ff0950e2b. |
| CVE-2019-20095 | mwifiex_tm_cmd in drivers/net/wireless/marvell/mwifiex/cfg80211.c in the Linux kernel before 5.1.6 has some error-handling cases that did not free allocated hostcmd memory, aka CID-003b686ace82. This will cause a memory leak and denial of service. |
| CVE-2019-20054 | In the Linux kernel before 5.0.6, there is a NULL pointer dereference in drop_sysctl_table() in fs/proc/proc_sysctl.c, related to put_links, aka CID-23da9588037e. |
| CVE-2019-1999 | In binder_alloc_free_page of binder_alloc.c, there is a possible double free due to improper locking. This could lead to local escalation of privilege in the kernel with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android kernel. Android ID: A-120025196. |
| CVE-2019-19966 | In the Linux kernel before 5.1.6, there is a use-after-free in cpia2_exit() in drivers/media/usb/cpia2/cpia2_v4l.c that will cause denial of service, aka CID-dea37a972655. |
| CVE-2019-19965 | In the Linux kernel through 5.4.6, there is a NULL pointer dereference in drivers/scsi/libsas/sas_discover.c because of mishandling of port disconnection during discovery, related to a PHY down race condition, aka CID-f70267f379b5. |
| CVE-2019-19947 | In the Linux kernel through 5.4.6, there are information leaks of uninitialized memory to a USB device in the drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c driver, aka CID-da2311a6385c. |
| CVE-2019-19927 | In the Linux kernel 5.0.0-rc7 (as distributed in ubuntu/linux.git on kernel.ubuntu.com), mounting a crafted f2fs filesystem image and performing some operations can lead to slab-out-of-bounds read access in ttm_put_pages in drivers/gpu/drm/ttm/ttm_page_alloc.c. This is related to the vmwgfx or ttm module. |
| CVE-2019-19922 | kernel/sched/fair.c in the Linux kernel before 5.3.9, when cpu.cfs_quota_us is used (e.g., with Kubernetes), allows attackers to cause a denial of service against non-cpu-bound applications by generating a workload that triggers unwanted slice expiration, aka CID-de53fd7aedb1. (In other words, although this slice expiration would typically be seen with benign workloads, it is possible that an attacker could calculate how many stray requests are required to force an entire Kubernetes cluster into a low-performance state caused by slice expiration, and ensure that a DDoS attack sent that number of stray requests. An attack does not affect the stability of the kernel; it only causes mismanagement of application execution.) |
| CVE-2019-19816 | In the Linux kernel 5.0.21, mounting a crafted btrfs filesystem image and performing some operations can cause slab-out-of-bounds write access in __btrfs_map_block in fs/btrfs/volumes.c, because a value of 1 for the number of data stripes is mishandled. |
| CVE-2019-19815 | In the Linux kernel 5.0.21, mounting a crafted f2fs filesystem image can cause a NULL pointer dereference in f2fs_recover_fsync_data in fs/f2fs/recovery.c. This is related to F2FS_P_SB in fs/f2fs/f2fs.h. |
| CVE-2019-19814 | In the Linux kernel 5.0.21, mounting a crafted f2fs filesystem image can cause __remove_dirty_segment slab-out-of-bounds write access because an array is bounded by the number of dirty types (8) but the array index can exceed this. |
| CVE-2019-19813 | In the Linux kernel 5.0.21, mounting a crafted btrfs filesystem image, performing some operations, and then making a syncfs system call can lead to a use-after-free in __mutex_lock in kernel/locking/mutex.c. This is related to mutex_can_spin_on_owner in kernel/locking/mutex.c, __btrfs_qgroup_free_meta in fs/btrfs/qgroup.c, and btrfs_insert_delayed_items in fs/btrfs/delayed-inode.c. |
| CVE-2019-19807 | In the Linux kernel before 5.3.11, sound/core/timer.c has a use-after-free caused by erroneous code refactoring, aka CID-e7af6307a8a5. This is related to snd_timer_open and snd_timer_close_locked. The timeri variable was originally intended to be for a newly created timer instance, but was used for a different purpose after refactoring. |
| CVE-2019-19770 | ** DISPUTED ** In the Linux kernel 4.19.83, there is a use-after-free (read) in the debugfs_remove function in fs/debugfs/inode.c (which is used to remove a file or directory in debugfs that was previously created with a call to another debugfs function such as debugfs_create_file). NOTE: Linux kernel developers dispute this issue as not being an issue with debugfs, instead this is an issue with misuse of debugfs within blktrace. |
| CVE-2019-19769 | In the Linux kernel 5.3.10, there is a use-after-free (read) in the perf_trace_lock_acquire function (related to include/trace/events/lock.h). |
| CVE-2019-19768 | In the Linux kernel 5.4.0-rc2, there is a use-after-free (read) in the __blk_add_trace function in kernel/trace/blktrace.c (which is used to fill out a blk_io_trace structure and place it in a per-cpu sub-buffer). |
| CVE-2019-19767 | The Linux kernel before 5.4.2 mishandles ext4_expand_extra_isize, as demonstrated by use-after-free errors in __ext4_expand_extra_isize and ext4_xattr_set_entry, related to fs/ext4/inode.c and fs/ext4/super.c, aka CID-4ea99936a163. |
| CVE-2019-19602 | fpregs_state_valid in arch/x86/include/asm/fpu/internal.h in the Linux kernel before 5.4.2, when GCC 9 is used, allows context-dependent attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact because of incorrect fpu_fpregs_owner_ctx caching, as demonstrated by mishandling of signal-based non-cooperative preemption in Go 1.14 prereleases on amd64, aka CID-59c4bd853abc. |
| CVE-2019-19543 | In the Linux kernel before 5.1.6, there is a use-after-free in serial_ir_init_module() in drivers/media/rc/serial_ir.c. |
| CVE-2019-19537 | In the Linux kernel before 5.2.10, there is a race condition bug that can be caused by a malicious USB device in the USB character device driver layer, aka CID-303911cfc5b9. This affects drivers/usb/core/file.c. |
| CVE-2019-19536 | In the Linux kernel before 5.2.9, there is an info-leak bug that can be caused by a malicious USB device in the drivers/net/can/usb/peak_usb/pcan_usb_pro.c driver, aka CID-ead16e53c2f0. |
| CVE-2019-19535 | In the Linux kernel before 5.2.9, there is an info-leak bug that can be caused by a malicious USB device in the drivers/net/can/usb/peak_usb/pcan_usb_fd.c driver, aka CID-30a8beeb3042. |
| CVE-2019-19534 | In the Linux kernel before 5.3.11, there is an info-leak bug that can be caused by a malicious USB device in the drivers/net/can/usb/peak_usb/pcan_usb_core.c driver, aka CID-f7a1337f0d29. |
| CVE-2019-19533 | In the Linux kernel before 5.3.4, there is an info-leak bug that can be caused by a malicious USB device in the drivers/media/usb/ttusb-dec/ttusb_dec.c driver, aka CID-a10feaf8c464. |
| CVE-2019-19532 | In the Linux kernel before 5.3.9, there are multiple out-of-bounds write bugs that can be caused by a malicious USB device in the Linux kernel HID drivers, aka CID-d9d4b1e46d95. This affects drivers/hid/hid-axff.c, drivers/hid/hid-dr.c, drivers/hid/hid-emsff.c, drivers/hid/hid-gaff.c, drivers/hid/hid-holtekff.c, drivers/hid/hid-lg2ff.c, drivers/hid/hid-lg3ff.c, drivers/hid/hid-lg4ff.c, drivers/hid/hid-lgff.c, drivers/hid/hid-logitech-hidpp.c, drivers/hid/hid-microsoft.c, drivers/hid/hid-sony.c, drivers/hid/hid-tmff.c, and drivers/hid/hid-zpff.c. |
| CVE-2019-19531 | In the Linux kernel before 5.2.9, there is a use-after-free bug that can be caused by a malicious USB device in the drivers/usb/misc/yurex.c driver, aka CID-fc05481b2fca. |
| CVE-2019-19530 | In the Linux kernel before 5.2.10, there is a use-after-free bug that can be caused by a malicious USB device in the drivers/usb/class/cdc-acm.c driver, aka CID-c52873e5a1ef. |
| CVE-2019-19529 | In the Linux kernel before 5.3.11, there is a use-after-free bug that can be caused by a malicious USB device in the drivers/net/can/usb/mcba_usb.c driver, aka CID-4d6636498c41. |
| CVE-2019-19528 | In the Linux kernel before 5.3.7, there is a use-after-free bug that can be caused by a malicious USB device in the drivers/usb/misc/iowarrior.c driver, aka CID-edc4746f253d. |
| CVE-2019-19527 | In the Linux kernel before 5.2.10, there is a use-after-free bug that can be caused by a malicious USB device in the drivers/hid/usbhid/hiddev.c driver, aka CID-9c09b214f30e. |
| CVE-2019-19526 | In the Linux kernel before 5.3.9, there is a use-after-free bug that can be caused by a malicious USB device in the drivers/nfc/pn533/usb.c driver, aka CID-6af3aa57a098. |
| CVE-2019-19525 | In the Linux kernel before 5.3.6, there is a use-after-free bug that can be caused by a malicious USB device in the drivers/net/ieee802154/atusb.c driver, aka CID-7fd25e6fc035. |
| CVE-2019-19524 | In the Linux kernel before 5.3.12, there is a use-after-free bug that can be caused by a malicious USB device in the drivers/input/ff-memless.c driver, aka CID-fa3a5a1880c9. |
| CVE-2019-19523 | In the Linux kernel before 5.3.7, there is a use-after-free bug that can be caused by a malicious USB device in the drivers/usb/misc/adutux.c driver, aka CID-44efc269db79. |
| CVE-2019-19462 | relay_open in kernel/relay.c in the Linux kernel through 5.4.1 allows local users to cause a denial of service (such as relay blockage) by triggering a NULL alloc_percpu result. |
| CVE-2019-19449 | In the Linux kernel 5.0.21, mounting a crafted f2fs filesystem image can lead to slab-out-of-bounds read access in f2fs_build_segment_manager in fs/f2fs/segment.c, related to init_min_max_mtime in fs/f2fs/segment.c (because the second argument to get_seg_entry is not validated). |
| CVE-2019-19448 | In the Linux kernel 5.0.21 and 5.3.11, mounting a crafted btrfs filesystem image, performing some operations, and then making a syncfs system call can lead to a use-after-free in try_merge_free_space in fs/btrfs/free-space-cache.c because the pointer to a left data structure can be the same as the pointer to a right data structure. |
| CVE-2019-19447 | In the Linux kernel 5.0.21, mounting a crafted ext4 filesystem image, performing some operations, and unmounting can lead to a use-after-free in ext4_put_super in fs/ext4/super.c, related to dump_orphan_list in fs/ext4/super.c. |
| CVE-2019-19378 | In the Linux kernel 5.0.21, mounting a crafted btrfs filesystem image can lead to slab-out-of-bounds write access in index_rbio_pages in fs/btrfs/raid56.c. |
| CVE-2019-19377 | In the Linux kernel 5.0.21, mounting a crafted btrfs filesystem image, performing some operations, and unmounting can lead to a use-after-free in btrfs_queue_work in fs/btrfs/async-thread.c. |
| CVE-2019-19338 | A flaw was found in the fix for CVE-2019-11135, in the Linux upstream kernel versions before 5.5 where, the way Intel CPUs handle speculative execution of instructions when a TSX Asynchronous Abort (TAA) error occurs. When a guest is running on a host CPU affected by the TAA flaw (TAA_NO=0), but is not affected by the MDS issue (MDS_NO=1), the guest was to clear the affected buffers by using a VERW instruction mechanism. But when the MDS_NO=1 bit was exported to the guests, the guests did not use the VERW mechanism to clear the affected buffers. This issue affects guests running on Cascade Lake CPUs and requires that host has 'TSX' enabled. Confidentiality of data is the highest threat associated with this vulnerability. |
| CVE-2019-19332 | An out-of-bounds memory write issue was found in the Linux Kernel, version 3.13 through 5.4, in the way the Linux kernel's KVM hypervisor handled the 'KVM_GET_EMULATED_CPUID' ioctl(2) request to get CPUID features emulated by the KVM hypervisor. A user or process able to access the '/dev/kvm' device could use this flaw to crash the system, resulting in a denial of service. |
| CVE-2019-19319 | In the Linux kernel before 5.2, a setxattr operation, after a mount of a crafted ext4 image, can cause a slab-out-of-bounds write access because of an ext4_xattr_set_entry use-after-free in fs/ext4/xattr.c when a large old_size value is used in a memset call, aka CID-345c0dbf3a30. |
| CVE-2019-19318 | In the Linux kernel 5.3.11, mounting a crafted btrfs image twice can cause an rwsem_down_write_slowpath use-after-free because (in rwsem_can_spin_on_owner in kernel/locking/rwsem.c) rwsem_owner_flags returns an already freed pointer, |
| CVE-2019-19252 | vcs_write in drivers/tty/vt/vc_screen.c in the Linux kernel through 5.3.13 does not prevent write access to vcsu devices, aka CID-0c9acb1af77a. |
| CVE-2019-19241 | In the Linux kernel before 5.4.2, the io_uring feature leads to requests that inadvertently have UID 0 and full capabilities, aka CID-181e448d8709. This is related to fs/io-wq.c, fs/io_uring.c, and net/socket.c. For example, an attacker can bypass intended restrictions on adding an IPv4 address to the loopback interface. This occurs because IORING_OP_SENDMSG operations, although requested in the context of an unprivileged user, are sometimes performed by a kernel worker thread without considering that context. |
| CVE-2019-19227 | In the AppleTalk subsystem in the Linux kernel before 5.1, there is a potential NULL pointer dereference because register_snap_client may return NULL. This will lead to denial of service in net/appletalk/aarp.c and net/appletalk/ddp.c, as demonstrated by unregister_snap_client, aka CID-9804501fa122. |
| CVE-2019-19083 | Memory leaks in *clock_source_create() functions under drivers/gpu/drm/amd/display/dc in the Linux kernel before 5.3.8 allow attackers to cause a denial of service (memory consumption). This affects the dce112_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c, the dce100_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c, the dcn10_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c, the dcn20_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c, the dce120_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c, the dce110_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c, and the dce80_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c, aka CID-055e547478a1. |
| CVE-2019-19082 | Memory leaks in *create_resource_pool() functions under drivers/gpu/drm/amd/display/dc in the Linux kernel through 5.3.11 allow attackers to cause a denial of service (memory consumption). This affects the dce120_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c, the dce110_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c, the dce100_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c, the dcn10_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c, and the dce112_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c, aka CID-104c307147ad. |
| CVE-2019-19081 | A memory leak in the nfp_flower_spawn_vnic_reprs() function in drivers/net/ethernet/netronome/nfp/flower/main.c in the Linux kernel before 5.3.4 allows attackers to cause a denial of service (memory consumption), aka CID-8ce39eb5a67a. |
| CVE-2019-19080 | Four memory leaks in the nfp_flower_spawn_phy_reprs() function in drivers/net/ethernet/netronome/nfp/flower/main.c in the Linux kernel before 5.3.4 allow attackers to cause a denial of service (memory consumption), aka CID-8572cea1461a. |
| CVE-2019-19079 | A memory leak in the qrtr_tun_write_iter() function in net/qrtr/tun.c in the Linux kernel before 5.3 allows attackers to cause a denial of service (memory consumption), aka CID-a21b7f0cff19. |
| CVE-2019-19078 | A memory leak in the ath10k_usb_hif_tx_sg() function in drivers/net/wireless/ath/ath10k/usb.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering usb_submit_urb() failures, aka CID-b8d17e7d93d2. |
| CVE-2019-19077 | A memory leak in the bnxt_re_create_srq() function in drivers/infiniband/hw/bnxt_re/ib_verbs.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering copy to udata failures, aka CID-4a9d46a9fe14. |
| CVE-2019-19076 | ** DISPUTED ** A memory leak in the nfp_abm_u32_knode_replace() function in drivers/net/ethernet/netronome/nfp/abm/cls.c in the Linux kernel before 5.3.6 allows attackers to cause a denial of service (memory consumption), aka CID-78beef629fd9. NOTE: This has been argued as not a valid vulnerability. The upstream commit 78beef629fd9 was reverted. |
| CVE-2019-19075 | A memory leak in the ca8210_probe() function in drivers/net/ieee802154/ca8210.c in the Linux kernel before 5.3.8 allows attackers to cause a denial of service (memory consumption) by triggering ca8210_get_platform_data() failures, aka CID-6402939ec86e. |
| CVE-2019-19074 | A memory leak in the ath9k_wmi_cmd() function in drivers/net/wireless/ath/ath9k/wmi.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption), aka CID-728c1e2a05e4. |
| CVE-2019-19073 | Memory leaks in drivers/net/wireless/ath/ath9k/htc_hst.c in the Linux kernel through 5.3.11 allow attackers to cause a denial of service (memory consumption) by triggering wait_for_completion_timeout() failures. This affects the htc_config_pipe_credits() function, the htc_setup_complete() function, and the htc_connect_service() function, aka CID-853acf7caf10. |
| CVE-2019-19072 | A memory leak in the predicate_parse() function in kernel/trace/trace_events_filter.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption), aka CID-96c5c6e6a5b6. |
| CVE-2019-19071 | A memory leak in the rsi_send_beacon() function in drivers/net/wireless/rsi/rsi_91x_mgmt.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering rsi_prepare_beacon() failures, aka CID-d563131ef23c. |
| CVE-2019-19070 | ** DISPUTED ** A memory leak in the spi_gpio_probe() function in drivers/spi/spi-gpio.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering devm_add_action_or_reset() failures, aka CID-d3b0ffa1d75d. NOTE: third parties dispute the relevance of this because the system must have already been out of memory before the probe began. |
| CVE-2019-19069 | A memory leak in the fastrpc_dma_buf_attach() function in drivers/misc/fastrpc.c in the Linux kernel before 5.3.9 allows attackers to cause a denial of service (memory consumption) by triggering dma_get_sgtable() failures, aka CID-fc739a058d99. |
| CVE-2019-19068 | A memory leak in the rtl8xxxu_submit_int_urb() function in drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering usb_submit_urb() failures, aka CID-a2cdd07488e6. |
| CVE-2019-19067 | ** DISPUTED ** Four memory leaks in the acp_hw_init() function in drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c in the Linux kernel before 5.3.8 allow attackers to cause a denial of service (memory consumption) by triggering mfd_add_hotplug_devices() or pm_genpd_add_device() failures, aka CID-57be09c6e874. NOTE: third parties dispute the relevance of this because the attacker must already have privileges for module loading. |
| CVE-2019-19066 | A memory leak in the bfad_im_get_stats() function in drivers/scsi/bfa/bfad_attr.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering bfa_port_get_stats() failures, aka CID-0e62395da2bd. |
| CVE-2019-19065 | ** DISPUTED ** A memory leak in the sdma_init() function in drivers/infiniband/hw/hfi1/sdma.c in the Linux kernel before 5.3.9 allows attackers to cause a denial of service (memory consumption) by triggering rhashtable_init() failures, aka CID-34b3be18a04e. NOTE: This has been disputed as not a vulnerability because "rhashtable_init() can only fail if it is passed invalid values in the second parameter's struct, but when invoked from sdma_init() that is a pointer to a static const struct, so an attacker could only trigger failure if they could corrupt kernel memory (in which case a small memory leak is not a significant problem)." |
| CVE-2019-19064 | ** DISPUTED ** A memory leak in the fsl_lpspi_probe() function in drivers/spi/spi-fsl-lpspi.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering pm_runtime_get_sync() failures, aka CID-057b8945f78f. NOTE: third parties dispute the relevance of this because an attacker cannot realistically control these failures at probe time. |
| CVE-2019-19063 | Two memory leaks in the rtl_usb_probe() function in drivers/net/wireless/realtek/rtlwifi/usb.c in the Linux kernel through 5.3.11 allow attackers to cause a denial of service (memory consumption), aka CID-3f9361695113. |
| CVE-2019-19062 | A memory leak in the crypto_report() function in crypto/crypto_user_base.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering crypto_report_alg() failures, aka CID-ffdde5932042. |
| CVE-2019-19061 | A memory leak in the adis_update_scan_mode_burst() function in drivers/iio/imu/adis_buffer.c in the Linux kernel before 5.3.9 allows attackers to cause a denial of service (memory consumption), aka CID-9c0530e898f3. |
| CVE-2019-19060 | A memory leak in the adis_update_scan_mode() function in drivers/iio/imu/adis_buffer.c in the Linux kernel before 5.3.9 allows attackers to cause a denial of service (memory consumption), aka CID-ab612b1daf41. |
| CVE-2019-19059 | Multiple memory leaks in the iwl_pcie_ctxt_info_gen3_init() function in drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c in the Linux kernel through 5.3.11 allow attackers to cause a denial of service (memory consumption) by triggering iwl_pcie_init_fw_sec() or dma_alloc_coherent() failures, aka CID-0f4f199443fa. |
| CVE-2019-19058 | A memory leak in the alloc_sgtable() function in drivers/net/wireless/intel/iwlwifi/fw/dbg.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering alloc_page() failures, aka CID-b4b814fec1a5. |
| CVE-2019-19057 | Two memory leaks in the mwifiex_pcie_init_evt_ring() function in drivers/net/wireless/marvell/mwifiex/pcie.c in the Linux kernel through 5.3.11 allow attackers to cause a denial of service (memory consumption) by triggering mwifiex_map_pci_memory() failures, aka CID-d10dcb615c8e. |
| CVE-2019-19056 | A memory leak in the mwifiex_pcie_alloc_cmdrsp_buf() function in drivers/net/wireless/marvell/mwifiex/pcie.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering mwifiex_map_pci_memory() failures, aka CID-db8fd2cde932. |
| CVE-2019-19055 | ** DISPUTED ** A memory leak in the nl80211_get_ftm_responder_stats() function in net/wireless/nl80211.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering nl80211hdr_put() failures, aka CID-1399c59fa929. NOTE: third parties dispute the relevance of this because it occurs on a code path where a successful allocation has already occurred. |
| CVE-2019-19054 | A memory leak in the cx23888_ir_probe() function in drivers/media/pci/cx23885/cx23888-ir.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering kfifo_alloc() failures, aka CID-a7b2df76b42b. |
| CVE-2019-19053 | A memory leak in the rpmsg_eptdev_write_iter() function in drivers/rpmsg/rpmsg_char.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering copy_from_iter_full() failures, aka CID-bbe692e349e2. |
| CVE-2019-19052 | A memory leak in the gs_can_open() function in drivers/net/can/usb/gs_usb.c in the Linux kernel before 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering usb_submit_urb() failures, aka CID-fb5be6a7b486. |
| CVE-2019-19051 | A memory leak in the i2400m_op_rfkill_sw_toggle() function in drivers/net/wimax/i2400m/op-rfkill.c in the Linux kernel before 5.3.11 allows attackers to cause a denial of service (memory consumption), aka CID-6f3ef5c25cc7. |
| CVE-2019-19050 | A memory leak in the crypto_reportstat() function in crypto/crypto_user_stat.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering crypto_reportstat_alg() failures, aka CID-c03b04dcdba1. |
| CVE-2019-19049 | ** DISPUTED ** A memory leak in the unittest_data_add() function in drivers/of/unittest.c in the Linux kernel before 5.3.10 allows attackers to cause a denial of service (memory consumption) by triggering of_fdt_unflatten_tree() failures, aka CID-e13de8fe0d6a. NOTE: third parties dispute the relevance of this because unittest.c can only be reached during boot. |
| CVE-2019-19048 | A memory leak in the crypto_reportstat() function in drivers/virt/vboxguest/vboxguest_utils.c in the Linux kernel before 5.3.9 allows attackers to cause a denial of service (memory consumption) by triggering copy_form_user() failures, aka CID-e0b0cb938864. |
| CVE-2019-19047 | A memory leak in the mlx5_fw_fatal_reporter_dump() function in drivers/net/ethernet/mellanox/mlx5/core/health.c in the Linux kernel before 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering mlx5_crdump_collect() failures, aka CID-c7ed6d0183d5. |
| CVE-2019-19046 | ** DISPUTED ** A memory leak in the __ipmi_bmc_register() function in drivers/char/ipmi/ipmi_msghandler.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering ida_simple_get() failure, aka CID-4aa7afb0ee20. NOTE: third parties dispute the relevance of this because an attacker cannot realistically control this failure at probe time. |
| CVE-2019-19045 | A memory leak in the mlx5_fpga_conn_create_cq() function in drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c in the Linux kernel before 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering mlx5_vector2eqn() failures, aka CID-c8c2a057fdc7. |
| CVE-2019-19044 | Two memory leaks in the v3d_submit_cl_ioctl() function in drivers/gpu/drm/v3d/v3d_gem.c in the Linux kernel before 5.3.11 allow attackers to cause a denial of service (memory consumption) by triggering kcalloc() or v3d_job_init() failures, aka CID-29cd13cfd762. |
| CVE-2019-19043 | A memory leak in the i40e_setup_macvlans() function in drivers/net/ethernet/intel/i40e/i40e_main.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering i40e_setup_channel() failures, aka CID-27d461333459. |
| CVE-2019-19039 | ** DISPUTED ** __btrfs_free_extent in fs/btrfs/extent-tree.c in the Linux kernel through 5.3.12 calls btrfs_print_leaf in a certain ENOENT case, which allows local users to obtain potentially sensitive information about register values via the dmesg program. NOTE: The BTRFS development team disputes this issues as not being a vulnerability because “1) The kernel provide facilities to restrict access to dmesg - dmesg_restrict=1 sysctl option. So it's really up to the system administrator to judge whether dmesg access shall be disallowed or not. 2) WARN/WARN_ON are widely used macros in the linux kernel. If this CVE is considered valid this would mean there are literally thousands CVE lurking in the kernel - something which clearly is not the case.” |
| CVE-2019-19037 | ext4_empty_dir in fs/ext4/namei.c in the Linux kernel through 5.3.12 allows a NULL pointer dereference because ext4_read_dirblock(inode,0,DIRENT_HTREE) can be zero. |
| CVE-2019-19036 | btrfs_root_node in fs/btrfs/ctree.c in the Linux kernel through 5.3.12 allows a NULL pointer dereference because rcu_dereference(root->node) can be zero. |
| CVE-2019-18885 | fs/btrfs/volumes.c in the Linux kernel before 5.1 allows a btrfs_verify_dev_extents NULL pointer dereference via a crafted btrfs image because fs_devices->devices is mishandled within find_device, aka CID-09ba3bc9dd15. |
| CVE-2019-18814 | An issue was discovered in the Linux kernel through 5.3.9. There is a use-after-free when aa_label_parse() fails in aa_audit_rule_init() in security/apparmor/audit.c. |
| CVE-2019-18813 | A memory leak in the dwc3_pci_probe() function in drivers/usb/dwc3/dwc3-pci.c in the Linux kernel through 5.3.9 allows attackers to cause a denial of service (memory consumption) by triggering platform_device_add_properties() failures, aka CID-9bbfceea12a8. |
| CVE-2019-18812 | A memory leak in the sof_dfsentry_write() function in sound/soc/sof/debug.c in the Linux kernel through 5.3.9 allows attackers to cause a denial of service (memory consumption), aka CID-c0a333d842ef. |
| CVE-2019-18811 | A memory leak in the sof_set_get_large_ctrl_data() function in sound/soc/sof/ipc.c in the Linux kernel through 5.3.9 allows attackers to cause a denial of service (memory consumption) by triggering sof_get_ctrl_copy_params() failures, aka CID-45c1380358b1. |
| CVE-2019-18810 | A memory leak in the komeda_wb_connector_add() function in drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c in the Linux kernel before 5.3.8 allows attackers to cause a denial of service (memory consumption) by triggering drm_writeback_connector_init() failures, aka CID-a0ecd6fdbf5d. |
| CVE-2019-18809 | A memory leak in the af9005_identify_state() function in drivers/media/usb/dvb-usb/af9005.c in the Linux kernel through 5.3.9 allows attackers to cause a denial of service (memory consumption), aka CID-2289adbfa559. |
| CVE-2019-18808 | A memory leak in the ccp_run_sha_cmd() function in drivers/crypto/ccp/ccp-ops.c in the Linux kernel through 5.3.9 allows attackers to cause a denial of service (memory consumption), aka CID-128c66429247. |
| CVE-2019-18807 | Two memory leaks in the sja1105_static_config_upload() function in drivers/net/dsa/sja1105/sja1105_spi.c in the Linux kernel before 5.3.5 allow attackers to cause a denial of service (memory consumption) by triggering static_config_buf_prepare_for_upload() or sja1105_inhibit_tx() failures, aka CID-68501df92d11. |
| CVE-2019-18806 | A memory leak in the ql_alloc_large_buffers() function in drivers/net/ethernet/qlogic/qla3xxx.c in the Linux kernel before 5.3.5 allows local users to cause a denial of service (memory consumption) by triggering pci_dma_mapping_error() failures, aka CID-1acb8f2a7a9f. |
| CVE-2019-18805 | An issue was discovered in net/ipv4/sysctl_net_ipv4.c in the Linux kernel before 5.0.11. There is a net/ipv4/tcp_input.c signed integer overflow in tcp_ack_update_rtt() when userspace writes a very large integer to /proc/sys/net/ipv4/tcp_min_rtt_wlen, leading to a denial of service or possibly unspecified other impact, aka CID-19fad20d15a6. |
| CVE-2019-18786 | In the Linux kernel through 5.3.8, f->fmt.sdr.reserved is uninitialized in rcar_drif_g_fmt_sdr_cap in drivers/media/platform/rcar_drif.c, which could cause a memory disclosure problem. |
| CVE-2019-18683 | An issue was discovered in drivers/media/platform/vivid in the Linux kernel through 5.3.8. It is exploitable for privilege escalation on some Linux distributions where local users have /dev/video0 access, but only if the driver happens to be loaded. There are multiple race conditions during streaming stopping in this driver (part of the V4L2 subsystem). These issues are caused by wrong mutex locking in vivid_stop_generating_vid_cap(), vivid_stop_generating_vid_out(), sdr_cap_stop_streaming(), and the corresponding kthreads. At least one of these race conditions leads to a use-after-free. |
| CVE-2019-18680 | An issue was discovered in the Linux kernel 4.4.x before 4.4.195. There is a NULL pointer dereference in rds_tcp_kill_sock() in net/rds/tcp.c that will cause denial of service, aka CID-91573ae4aed0. |
| CVE-2019-18675 | The Linux kernel through 5.3.13 has a start_offset+size Integer Overflow in cpia2_remap_buffer in drivers/media/usb/cpia2/cpia2_core.c because cpia2 has its own mmap implementation. This allows local users (with /dev/video0 access) to obtain read and write permissions on kernel physical pages, which can possibly result in a privilege escalation. |
| CVE-2019-18660 | The Linux kernel before 5.4.1 on powerpc allows Information Exposure because the Spectre-RSB mitigation is not in place for all applicable CPUs, aka CID-39e72bf96f58. This is related to arch/powerpc/kernel/entry_64.S and arch/powerpc/kernel/security.c. |
| CVE-2019-18282 | The flow_dissector feature in the Linux kernel 4.3 through 5.x before 5.3.10 has a device tracking vulnerability, aka CID-55667441c84f. This occurs because the auto flowlabel of a UDP IPv6 packet relies on a 32-bit hashrnd value as a secret, and because jhash (instead of siphash) is used. The hashrnd value remains the same starting from boot time, and can be inferred by an attacker. This affects net/core/flow_dissector.c and related code. |
| CVE-2019-18198 | In the Linux kernel before 5.3.4, a reference count usage error in the fib6_rule_suppress() function in the fib6 suppression feature of net/ipv6/fib6_rules.c, when handling the FIB_LOOKUP_NOREF flag, can be exploited by a local attacker to corrupt memory, aka CID-ca7a03c41753. |
| CVE-2019-17666 | rtl_p2p_noa_ie in drivers/net/wireless/realtek/rtlwifi/ps.c in the Linux kernel through 5.3.6 lacks a certain upper-bound check, leading to a buffer overflow. |
| CVE-2019-17351 | An issue was discovered in drivers/xen/balloon.c in the Linux kernel before 5.2.3, as used in Xen through 4.12.x, allowing guest OS users to cause a denial of service because of unrestricted resource consumption during the mapping of guest memory, aka CID-6ef36ab967c7. |
| CVE-2019-17347 | An issue was discovered in Xen through 4.11.x allowing x86 PV guest OS users to cause a denial of service or gain privileges because a guest can manipulate its virtualised %cr4 in a way that is incompatible with Linux (and possibly other guest kernels). |
| CVE-2019-17133 | In the Linux kernel through 5.3.2, cfg80211_mgd_wext_giwessid in net/wireless/wext-sme.c does not reject a long SSID IE, leading to a Buffer Overflow. |
| CVE-2019-17075 | An issue was discovered in write_tpt_entry in drivers/infiniband/hw/cxgb4/mem.c in the Linux kernel through 5.3.2. The cxgb4 driver is directly calling dma_map_single (a DMA function) from a stack variable. This could allow an attacker to trigger a Denial of Service, exploitable if this driver is used on an architecture for which this stack/DMA interaction has security relevance. |
| CVE-2019-17056 | llcp_sock_create in net/nfc/llcp_sock.c in the AF_NFC network module in the Linux kernel through 5.3.2 does not enforce CAP_NET_RAW, which means that unprivileged users can create a raw socket, aka CID-3a359798b176. |
| CVE-2019-17055 | base_sock_create in drivers/isdn/mISDN/socket.c in the AF_ISDN network module in the Linux kernel through 5.3.2 does not enforce CAP_NET_RAW, which means that unprivileged users can create a raw socket, aka CID-b91ee4aa2a21. |
| CVE-2019-17054 | atalk_create in net/appletalk/ddp.c in the AF_APPLETALK network module in the Linux kernel through 5.3.2 does not enforce CAP_NET_RAW, which means that unprivileged users can create a raw socket, aka CID-6cc03e8aa36c. |
| CVE-2019-17053 | ieee802154_create in net/ieee802154/socket.c in the AF_IEEE802154 network module in the Linux kernel through 5.3.2 does not enforce CAP_NET_RAW, which means that unprivileged users can create a raw socket, aka CID-e69dbd4619e7. |
| CVE-2019-17052 | ax25_create in net/ax25/af_ax25.c in the AF_AX25 network module in the Linux kernel 3.16 through 5.3.2 does not enforce CAP_NET_RAW, which means that unprivileged users can create a raw socket, aka CID-0614e2b73768. |
| CVE-2019-16995 | In the Linux kernel before 5.0.3, a memory leak exits in hsr_dev_finalize() in net/hsr/hsr_device.c if hsr_add_port fails to add a port, which may cause denial of service, aka CID-6caabe7f197d. |
| CVE-2019-16994 | In the Linux kernel before 5.0, a memory leak exists in sit_init_net() in net/ipv6/sit.c when register_netdev() fails to register sitn->fb_tunnel_dev, which may cause denial of service, aka CID-07f12b26e21a. |
| CVE-2019-16921 | In the Linux kernel before 4.17, hns_roce_alloc_ucontext in drivers/infiniband/hw/hns/hns_roce_main.c does not initialize the resp data structure, which might allow attackers to obtain sensitive information from kernel stack memory, aka CID-df7e40425813. |
| CVE-2019-16746 | An issue was discovered in net/wireless/nl80211.c in the Linux kernel through 5.2.17. It does not check the length of variable elements in a beacon head, leading to a buffer overflow. |
| CVE-2019-16714 | In the Linux kernel before 5.2.14, rds6_inc_info_copy in net/rds/recv.c allows attackers to obtain sensitive information from kernel stack memory because tos and flags fields are not initialized. |
| CVE-2019-16413 | An issue was discovered in the Linux kernel before 5.0.4. The 9p filesystem did not protect i_size_write() properly, which causes an i_size_read() infinite loop and denial of service on SMP systems. |
| CVE-2019-16234 | drivers/net/wireless/intel/iwlwifi/pcie/trans.c in the Linux kernel 5.2.14 does not check the alloc_workqueue return value, leading to a NULL pointer dereference. |
| CVE-2019-16233 | drivers/scsi/qla2xxx/qla_os.c in the Linux kernel 5.2.14 does not check the alloc_workqueue return value, leading to a NULL pointer dereference. |
| CVE-2019-16232 | drivers/net/wireless/marvell/libertas/if_sdio.c in the Linux kernel 5.2.14 does not check the alloc_workqueue return value, leading to a NULL pointer dereference. |
| CVE-2019-16231 | drivers/net/fjes/fjes_main.c in the Linux kernel 5.2.14 does not check the alloc_workqueue return value, leading to a NULL pointer dereference. |
| CVE-2019-16230 | ** DISPUTED ** drivers/gpu/drm/radeon/radeon_display.c in the Linux kernel 5.2.14 does not check the alloc_workqueue return value, leading to a NULL pointer dereference. NOTE: A third-party software maintainer states that the work queue allocation is happening during device initialization, which for a graphics card occurs during boot. It is not attacker controllable and OOM at that time is highly unlikely. |
| CVE-2019-16229 | ** DISPUTED ** drivers/gpu/drm/amd/amdkfd/kfd_interrupt.c in the Linux kernel 5.2.14 does not check the alloc_workqueue return value, leading to a NULL pointer dereference. NOTE: The security community disputes this issues as not being serious enough to be deserving a CVE id. |
| CVE-2019-16089 | An issue was discovered in the Linux kernel through 5.2.13. nbd_genl_status in drivers/block/nbd.c does not check the nla_nest_start_noflag return value. |
| CVE-2019-15927 | An issue was discovered in the Linux kernel before 4.20.2. An out-of-bounds access exists in the function build_audio_procunit in the file sound/usb/mixer.c. |
| CVE-2019-15926 | An issue was discovered in the Linux kernel before 5.2.3. Out of bounds access exists in the functions ath6kl_wmi_pstream_timeout_event_rx and ath6kl_wmi_cac_event_rx in the file drivers/net/wireless/ath/ath6kl/wmi.c. |
| CVE-2019-15925 | An issue was discovered in the Linux kernel before 5.2.3. An out of bounds access exists in the function hclge_tm_schd_mode_vnet_base_cfg in the file drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c. |
| CVE-2019-15924 | An issue was discovered in the Linux kernel before 5.0.11. fm10k_init_module in drivers/net/ethernet/intel/fm10k/fm10k_main.c has a NULL pointer dereference because there is no -ENOMEM upon an alloc_workqueue failure. |
| CVE-2019-15923 | An issue was discovered in the Linux kernel before 5.0.9. There is a NULL pointer dereference for a cd data structure if alloc_disk fails in drivers/block/paride/pf.c. |
| CVE-2019-15922 | An issue was discovered in the Linux kernel before 5.0.9. There is a NULL pointer dereference for a pf data structure if alloc_disk fails in drivers/block/paride/pf.c. |
| CVE-2019-15921 | An issue was discovered in the Linux kernel before 5.0.6. There is a memory leak issue when idr_alloc() fails in genl_register_family() in net/netlink/genetlink.c. |
| CVE-2019-15920 | An issue was discovered in the Linux kernel before 5.0.10. SMB2_read in fs/cifs/smb2pdu.c has a use-after-free. NOTE: this was not fixed correctly in 5.0.10; see the 5.0.11 ChangeLog, which documents a memory leak. |
| CVE-2019-15919 | An issue was discovered in the Linux kernel before 5.0.10. SMB2_write in fs/cifs/smb2pdu.c has a use-after-free. |
| CVE-2019-15918 | An issue was discovered in the Linux kernel before 5.0.10. SMB2_negotiate in fs/cifs/smb2pdu.c has an out-of-bounds read because data structures are incompletely updated after a change from smb30 to smb21. |
| CVE-2019-15917 | An issue was discovered in the Linux kernel before 5.0.5. There is a use-after-free issue when hci_uart_register_dev() fails in hci_uart_set_proto() in drivers/bluetooth/hci_ldisc.c. |
| CVE-2019-15916 | An issue was discovered in the Linux kernel before 5.0.1. There is a memory leak in register_queue_kobjects() in net/core/net-sysfs.c, which will cause denial of service. |
| CVE-2019-15902 | A backporting error was discovered in the Linux stable/longterm kernel 4.4.x through 4.4.190, 4.9.x through 4.9.190, 4.14.x through 4.14.141, 4.19.x through 4.19.69, and 5.2.x through 5.2.11. Misuse of the upstream "x86/ptrace: Fix possible spectre-v1 in ptrace_get_debugreg()" commit reintroduced the Spectre vulnerability that it aimed to eliminate. This occurred because the backport process depends on cherry picking specific commits, and because two (correctly ordered) code lines were swapped. |
| CVE-2019-15807 | In the Linux kernel before 5.1.13, there is a memory leak in drivers/scsi/libsas/sas_expander.c when SAS expander discovery fails. This will cause a BUG and denial of service. |
| CVE-2019-15794 | Overlayfs in the Linux kernel and shiftfs, a non-upstream patch to the Linux kernel included in the Ubuntu 5.0 and 5.3 kernel series, both replace vma->vm_file in their mmap handlers. On error the original value is not restored, and the reference is put for the file to which vm_file points. On upstream kernels this is not an issue, as no callers dereference vm_file following after call_mmap() returns an error. However, the aufs patchs change mmap_region() to replace the fput() using a local variable with vma_fput(), which will fput() vm_file, leading to a refcount underflow. |
| CVE-2019-15793 | In shiftfs, a non-upstream patch to the Linux kernel included in the Ubuntu 5.0 and 5.3 kernel series, several locations which shift ids translate user/group ids before performing operations in the lower filesystem were translating them into init_user_ns, whereas they should have been translated into the s_user_ns for the lower filesystem. This resulted in using ids other than the intended ones in the lower fs, which likely did not map into the shifts s_user_ns. A local attacker could use this to possibly bypass discretionary access control permissions. |
| CVE-2019-15792 | In shiftfs, a non-upstream patch to the Linux kernel included in the Ubuntu 5.0 and 5.3 kernel series, shiftfs_btrfs_ioctl_fd_replace() calls fdget(oldfd), then without further checks passes the resulting file* into shiftfs_real_fdget(), which casts file->private_data, a void* that points to a filesystem-dependent type, to a "struct shiftfs_file_info *". As the private_data is not required to be a pointer, an attacker can use this to cause a denial of service or possibly execute arbitrary code. |
| CVE-2019-15791 | In shiftfs, a non-upstream patch to the Linux kernel included in the Ubuntu 5.0 and 5.3 kernel series, shiftfs_btrfs_ioctl_fd_replace() installs an fd referencing a file from the lower filesystem without taking an additional reference to that file. After the btrfs ioctl completes this fd is closed, which then puts a reference to that file, leading to a refcount underflow. |
| CVE-2019-15666 | An issue was discovered in the Linux kernel before 5.0.19. There is an out-of-bounds array access in __xfrm_policy_unlink, which will cause denial of service, because verify_newpolicy_info in net/xfrm/xfrm_user.c mishandles directory validation. |
| CVE-2019-15538 | An issue was discovered in xfs_setattr_nonsize in fs/xfs/xfs_iops.c in the Linux kernel through 5.2.9. XFS partially wedges when a chgrp fails on account of being out of disk quota. xfs_setattr_nonsize is failing to unlock the ILOCK after the xfs_qm_vop_chown_reserve call fails. This is primarily a local DoS attack vector, but it might result as well in remote DoS if the XFS filesystem is exported for instance via NFS. |
| CVE-2019-15505 | drivers/media/usb/dvb-usb/technisat-usb2.c in the Linux kernel through 5.2.9 has an out-of-bounds read via crafted USB device traffic (which may be remote via usbip or usbredir). |
| CVE-2019-15504 | drivers/net/wireless/rsi/rsi_91x_usb.c in the Linux kernel through 5.2.9 has a Double Free via crafted USB device traffic (which may be remote via usbip or usbredir). |
| CVE-2019-15292 | An issue was discovered in the Linux kernel before 5.0.9. There is a use-after-free in atalk_proc_exit, related to net/appletalk/atalk_proc.c, net/appletalk/ddp.c, and net/appletalk/sysctl_net_atalk.c. |
| CVE-2019-15291 | An issue was discovered in the Linux kernel through 5.2.9. There is a NULL pointer dereference caused by a malicious USB device in the flexcop_usb_probe function in the drivers/media/usb/b2c2/flexcop-usb.c driver. |
| CVE-2019-15239 | In the Linux kernel, a certain net/ipv4/tcp_output.c change, which was properly incorporated into 4.16.12, was incorrectly backported to the earlier longterm kernels, introducing a new vulnerability that was potentially more severe than the issue that was intended to be fixed by backporting. Specifically, by adding to a write queue between disconnection and re-connection, a local attacker can trigger multiple use-after-free conditions. This can result in a kernel crash, or potentially in privilege escalation. NOTE: this affects (for example) Linux distributions that use 4.9.x longterm kernels before 4.9.190 or 4.14.x longterm kernels before 4.14.139. |
| CVE-2019-15223 | An issue was discovered in the Linux kernel before 5.1.8. There is a NULL pointer dereference caused by a malicious USB device in the sound/usb/line6/driver.c driver. |
| CVE-2019-15222 | An issue was discovered in the Linux kernel before 5.2.8. There is a NULL pointer dereference caused by a malicious USB device in the sound/usb/helper.c (motu_microbookii) driver. |
| CVE-2019-15221 | An issue was discovered in the Linux kernel before 5.1.17. There is a NULL pointer dereference caused by a malicious USB device in the sound/usb/line6/pcm.c driver. |
| CVE-2019-15220 | An issue was discovered in the Linux kernel before 5.2.1. There is a use-after-free caused by a malicious USB device in the drivers/net/wireless/intersil/p54/p54usb.c driver. |
| CVE-2019-15219 | An issue was discovered in the Linux kernel before 5.1.8. There is a NULL pointer dereference caused by a malicious USB device in the drivers/usb/misc/sisusbvga/sisusb.c driver. |
| CVE-2019-15218 | An issue was discovered in the Linux kernel before 5.1.8. There is a NULL pointer dereference caused by a malicious USB device in the drivers/media/usb/siano/smsusb.c driver. |
| CVE-2019-15217 | An issue was discovered in the Linux kernel before 5.2.3. There is a NULL pointer dereference caused by a malicious USB device in the drivers/media/usb/zr364xx/zr364xx.c driver. |
| CVE-2019-15216 | An issue was discovered in the Linux kernel before 5.0.14. There is a NULL pointer dereference caused by a malicious USB device in the drivers/usb/misc/yurex.c driver. |
| CVE-2019-15215 | An issue was discovered in the Linux kernel before 5.2.6. There is a use-after-free caused by a malicious USB device in the drivers/media/usb/cpia2/cpia2_usb.c driver. |
| CVE-2019-15214 | An issue was discovered in the Linux kernel before 5.0.10. There is a use-after-free in the sound subsystem because card disconnection causes certain data structures to be deleted too early. This is related to sound/core/init.c and sound/core/info.c. |
| CVE-2019-15213 | An issue was discovered in the Linux kernel before 5.2.3. There is a use-after-free caused by a malicious USB device in the drivers/media/usb/dvb-usb/dvb-usb-init.c driver. |
| CVE-2019-15212 | An issue was discovered in the Linux kernel before 5.1.8. There is a double-free caused by a malicious USB device in the drivers/usb/misc/rio500.c driver. |
| CVE-2019-15211 | An issue was discovered in the Linux kernel before 5.2.6. There is a use-after-free caused by a malicious USB device in the drivers/media/v4l2-core/v4l2-dev.c driver because drivers/media/radio/radio-raremono.c does not properly allocate memory. |
| CVE-2019-15118 | check_input_term in sound/usb/mixer.c in the Linux kernel through 5.2.9 mishandles recursion, leading to kernel stack exhaustion. |
| CVE-2019-15117 | parse_audio_mixer_unit in sound/usb/mixer.c in the Linux kernel through 5.2.9 mishandles a short descriptor, leading to out-of-bounds memory access. |
| CVE-2019-15099 | drivers/net/wireless/ath/ath10k/usb.c in the Linux kernel through 5.2.8 has a NULL pointer dereference via an incomplete address in an endpoint descriptor. |
| CVE-2019-15098 | drivers/net/wireless/ath/ath6kl/usb.c in the Linux kernel through 5.2.9 has a NULL pointer dereference via an incomplete address in an endpoint descriptor. |
| CVE-2019-15090 | An issue was discovered in drivers/scsi/qedi/qedi_dbg.c in the Linux kernel before 5.1.12. In the qedi_dbg_* family of functions, there is an out-of-bounds read. |
| CVE-2019-15031 | In the Linux kernel through 5.2.14 on the powerpc platform, a local user can read vector registers of other users' processes via an interrupt. To exploit the venerability, a local user starts a transaction (via the hardware transactional memory instruction tbegin) and then accesses vector registers. At some point, the vector registers will be corrupted with the values from a different local Linux process, because MSR_TM_ACTIVE is misused in arch/powerpc/kernel/process.c. |
| CVE-2019-15030 | In the Linux kernel through 5.2.14 on the powerpc platform, a local user can read vector registers of other users' processes via a Facility Unavailable exception. To exploit the venerability, a local user starts a transaction (via the hardware transactional memory instruction tbegin) and then accesses vector registers. At some point, the vector registers will be corrupted with the values from a different local Linux process because of a missing arch/powerpc/kernel/process.c check. |
| CVE-2019-14901 | A heap overflow flaw was found in the Linux kernel, all versions 3.x.x and 4.x.x before 4.18.0, in Marvell WiFi chip driver. The vulnerability allows a remote attacker to cause a system crash, resulting in a denial of service, or execute arbitrary code. The highest threat with this vulnerability is with the availability of the system. If code execution occurs, the code will run with the permissions of root. This will affect both confidentiality and integrity of files on the system. |
| CVE-2019-14898 | The fix for CVE-2019-11599, affecting the Linux kernel before 5.0.10 was not complete. A local user could use this flaw to obtain sensitive information, cause a denial of service, or possibly have other unspecified impacts by triggering a race condition with mmget_not_zero or get_task_mm calls. |
| CVE-2019-14897 | A stack-based buffer overflow was found in the Linux kernel, version kernel-2.6.32, in Marvell WiFi chip driver. An attacker is able to cause a denial of service (system crash) or, possibly execute arbitrary code, when a STA works in IBSS mode (allows connecting stations together without the use of an AP) and connects to another STA. |
| CVE-2019-14896 | A heap-based buffer overflow vulnerability was found in the Linux kernel, version kernel-2.6.32, in Marvell WiFi chip driver. A remote attacker could cause a denial of service (system crash) or, possibly execute arbitrary code, when the lbs_ibss_join_existing function is called after a STA connects to an AP. |
| CVE-2019-14895 | A heap-based buffer overflow was discovered in the Linux kernel, all versions 3.x.x and 4.x.x before 4.18.0, in Marvell WiFi chip driver. The flaw could occur when the station attempts a connection negotiation during the handling of the remote devices country settings. This could allow the remote device to cause a denial of service (system crash) or possibly execute arbitrary code. |
| CVE-2019-14835 | A buffer overflow flaw was found, in versions from 2.6.34 to 5.2.x, in the way Linux kernel's vhost functionality that translates virtqueue buffers to IOVs, logged the buffer descriptors during migration. A privileged guest user able to pass descriptors with invalid length to the host when migration is underway, could use this flaw to increase their privileges on the host. |
| CVE-2019-14821 | An out-of-bounds access issue was found in the Linux kernel, all versions through 5.3, in the way Linux kernel's KVM hypervisor implements the Coalesced MMIO write operation. It operates on an MMIO ring buffer 'struct kvm_coalesced_mmio' object, wherein write indices 'ring->first' and 'ring->last' value could be supplied by a host user-space process. An unprivileged host user or process with access to '/dev/kvm' device could use this flaw to crash the host kernel, resulting in a denial of service or potentially escalating privileges on the system. |
| CVE-2019-14816 | There is heap-based buffer overflow in kernel, all versions up to, excluding 5.3, in the marvell wifi chip driver in Linux kernel, that allows local users to cause a denial of service(system crash) or possibly execute arbitrary code. |
| CVE-2019-14815 | A vulnerability was found in Linux Kernel, where a Heap Overflow was found in mwifiex_set_wmm_params() function of Marvell Wifi Driver. |
| CVE-2019-14814 | There is heap-based buffer overflow in Linux kernel, all versions up to, excluding 5.3, in the marvell wifi chip driver in Linux kernel, that allows local users to cause a denial of service(system crash) or possibly execute arbitrary code. |
| CVE-2019-14763 | In the Linux kernel before 4.16.4, a double-locking error in drivers/usb/dwc3/gadget.c may potentially cause a deadlock with f_hid. |
| CVE-2019-14284 | In the Linux kernel before 5.2.3, drivers/block/floppy.c allows a denial of service by setup_format_params division-by-zero. Two consecutive ioctls can trigger the bug: the first one should set the drive geometry with .sect and .rate values that make F_SECT_PER_TRACK be zero. Next, the floppy format operation should be called. It can be triggered by an unprivileged local user even when a floppy disk has not been inserted. NOTE: QEMU creates the floppy device by default. |
| CVE-2019-14283 | In the Linux kernel before 5.2.3, set_geometry in drivers/block/floppy.c does not validate the sect and head fields, as demonstrated by an integer overflow and out-of-bounds read. It can be triggered by an unprivileged local user when a floppy disk has been inserted. NOTE: QEMU creates the floppy device by default. |
| CVE-2019-13648 | In the Linux kernel through 5.2.1 on the powerpc platform, when hardware transactional memory is disabled, a local user can cause a denial of service (TM Bad Thing exception and system crash) via a sigreturn() system call that sends a crafted signal frame. This affects arch/powerpc/kernel/signal_32.c and arch/powerpc/kernel/signal_64.c. |
| CVE-2019-13631 | In parse_hid_report_descriptor in drivers/input/tablet/gtco.c in the Linux kernel through 5.2.1, a malicious USB device can send an HID report that triggers an out-of-bounds write during generation of debugging messages. |
| CVE-2019-13272 | In the Linux kernel before 5.1.17, ptrace_link in kernel/ptrace.c mishandles the recording of the credentials of a process that wants to create a ptrace relationship, which allows local users to obtain root access by leveraging certain scenarios with a parent-child process relationship, where a parent drops privileges and calls execve (potentially allowing control by an attacker). One contributing factor is an object lifetime issue (which can also cause a panic). Another contributing factor is incorrect marking of a ptrace relationship as privileged, which is exploitable through (for example) Polkit's pkexec helper with PTRACE_TRACEME. NOTE: SELinux deny_ptrace might be a usable workaround in some environments. |
| CVE-2019-13233 | In arch/x86/lib/insn-eval.c in the Linux kernel before 5.1.9, there is a use-after-free for access to an LDT entry because of a race condition between modify_ldt() and a #BR exception for an MPX bounds violation. |
| CVE-2019-12984 | A NULL pointer dereference vulnerability in the function nfc_genl_deactivate_target() in net/nfc/netlink.c in the Linux kernel before 5.1.13 can be triggered by a malicious user-mode program that omits certain NFC attributes, leading to denial of service. |
| CVE-2019-12881 | i915_gem_userptr_get_pages in drivers/gpu/drm/i915/i915_gem_userptr.c in the Linux kernel 4.15.0 on Ubuntu 18.04.2 allows local users to cause a denial of service (NULL pointer dereference and BUG) or possibly have unspecified other impact via crafted ioctl calls to /dev/dri/card0. |
| CVE-2019-12819 | An issue was discovered in the Linux kernel before 5.0. The function __mdiobus_register() in drivers/net/phy/mdio_bus.c calls put_device(), which will trigger a fixed_mdio_bus_init use-after-free. This will cause a denial of service. |
| CVE-2019-12818 | An issue was discovered in the Linux kernel before 4.20.15. The nfc_llcp_build_tlv function in net/nfc/llcp_commands.c may return NULL. If the caller does not check for this, it will trigger a NULL pointer dereference. This will cause denial of service. This affects nfc_llcp_build_gb in net/nfc/llcp_core.c. |
| CVE-2019-12817 | arch/powerpc/mm/mmu_context_book3s64.c in the Linux kernel before 5.1.15 for powerpc has a bug where unrelated processes may be able to read/write to one another's virtual memory under certain conditions via an mmap above 512 TB. Only a subset of powerpc systems are affected. |
| CVE-2019-12615 | An issue was discovered in get_vdev_port_node_info in arch/sparc/kernel/mdesc.c in the Linux kernel through 5.1.6. There is an unchecked kstrdup_const of node_info->vdev_port.name, which might allow an attacker to cause a denial of service (NULL pointer dereference and system crash). |
| CVE-2019-12614 | An issue was discovered in dlpar_parse_cc_property in arch/powerpc/platforms/pseries/dlpar.c in the Linux kernel through 5.1.6. There is an unchecked kstrdup of prop->name, which might allow an attacker to cause a denial of service (NULL pointer dereference and system crash). |
| CVE-2019-12456 | ** DISPUTED ** An issue was discovered in the MPT3COMMAND case in _ctl_ioctl_main in drivers/scsi/mpt3sas/mpt3sas_ctl.c in the Linux kernel through 5.1.5. It allows local users to cause a denial of service or possibly have unspecified other impact by changing the value of ioc_number between two kernel reads of that value, aka a "double fetch" vulnerability. NOTE: a third party reports that this is unexploitable because the doubly fetched value is not used. |
| CVE-2019-12455 | ** DISPUTED ** An issue was discovered in sunxi_divs_clk_setup in drivers/clk/sunxi/clk-sunxi.c in the Linux kernel through 5.1.5. There is an unchecked kstrndup of derived_name, which might allow an attacker to cause a denial of service (NULL pointer dereference and system crash). NOTE: This id is disputed as not being an issue because “The memory allocation that was not checked is part of a code that only runs at boot time, before user processes are started. Therefore, there is no possibility for an unprivileged user to control it, and no denial of service.”. |
| CVE-2019-12454 | ** DISPUTED ** An issue was discovered in wcd9335_codec_enable_dec in sound/soc/codecs/wcd9335.c in the Linux kernel through 5.1.5. It uses kstrndup instead of kmemdup_nul, which allows attackers to have an unspecified impact via unknown vectors. NOTE: The vendor disputes this issues as not being a vulnerability because switching to kmemdup_nul() would only fix a security issue if the source string wasn't NUL-terminated, which is not the case. |
| CVE-2019-12382 | ** DISPUTED ** An issue was discovered in drm_load_edid_firmware in drivers/gpu/drm/drm_edid_load.c in the Linux kernel through 5.1.5. There is an unchecked kstrdup of fwstr, which might allow an attacker to cause a denial of service (NULL pointer dereference and system crash). NOTE: The vendor disputes this issues as not being a vulnerability because kstrdup() returning NULL is handled sufficiently and there is no chance for a NULL pointer dereference. |
| CVE-2019-12381 | ** DISPUTED ** An issue was discovered in ip_ra_control in net/ipv4/ip_sockglue.c in the Linux kernel through 5.1.5. There is an unchecked kmalloc of new_ra, which might allow an attacker to cause a denial of service (NULL pointer dereference and system crash). NOTE: this is disputed because new_ra is never used if it is NULL. |
| CVE-2019-12380 | **DISPUTED** An issue was discovered in the efi subsystem in the Linux kernel through 5.1.5. phys_efi_set_virtual_address_map in arch/x86/platform/efi/efi.c and efi_call_phys_prolog in arch/x86/platform/efi/efi_64.c mishandle memory allocation failures. NOTE: This id is disputed as not being an issue because “All the code touched by the referenced commit runs only at boot, before any user processes are started. Therefore, there is no possibility for an unprivileged user to control it.”. |
| CVE-2019-12379 | ** DISPUTED ** An issue was discovered in con_insert_unipair in drivers/tty/vt/consolemap.c in the Linux kernel through 5.1.5. There is a memory leak in a certain case of an ENOMEM outcome of kmalloc. NOTE: This id is disputed as not being an issue. |
| CVE-2019-12378 | ** DISPUTED ** An issue was discovered in ip6_ra_control in net/ipv6/ipv6_sockglue.c in the Linux kernel through 5.1.5. There is an unchecked kmalloc of new_ra, which might allow an attacker to cause a denial of service (NULL pointer dereference and system crash). NOTE: This has been disputed as not an issue. |
| CVE-2019-11884 | The do_hidp_sock_ioctl function in net/bluetooth/hidp/sock.c in the Linux kernel before 5.0.15 allows a local user to obtain potentially sensitive information from kernel stack memory via a HIDPCONNADD command, because a name field may not end with a '\0' character. |
| CVE-2019-11833 | fs/ext4/extents.c in the Linux kernel through 5.1.2 does not zero out the unused memory region in the extent tree block, which might allow local users to obtain sensitive information by reading uninitialized data in the filesystem. |
| CVE-2019-11815 | An issue was discovered in rds_tcp_kill_sock in net/rds/tcp.c in the Linux kernel before 5.0.8. There is a race condition leading to a use-after-free, related to net namespace cleanup. |
| CVE-2019-11811 | An issue was discovered in the Linux kernel before 5.0.4. There is a use-after-free upon attempted read access to /proc/ioports after the ipmi_si module is removed, related to drivers/char/ipmi/ipmi_si_intf.c, drivers/char/ipmi/ipmi_si_mem_io.c, and drivers/char/ipmi/ipmi_si_port_io.c. |
| CVE-2019-11810 | An issue was discovered in the Linux kernel before 5.0.7. A NULL pointer dereference can occur when megasas_create_frame_pool() fails in megasas_alloc_cmds() in drivers/scsi/megaraid/megaraid_sas_base.c. This causes a Denial of Service, related to a use-after-free. |
| CVE-2019-11683 | udp_gro_receive_segment in net/ipv4/udp_offload.c in the Linux kernel 5.x before 5.0.13 allows remote attackers to cause a denial of service (slab-out-of-bounds memory corruption) or possibly have unspecified other impact via UDP packets with a 0 payload, because of mishandling of padded packets, aka the "GRO packet of death" issue. |
| CVE-2019-11599 | The coredump implementation in the Linux kernel before 5.0.10 does not use locking or other mechanisms to prevent vma layout or vma flags changes while it runs, which allows local users to obtain sensitive information, cause a denial of service, or possibly have unspecified other impact by triggering a race condition with mmget_not_zero or get_task_mm calls. This is related to fs/userfaultfd.c, mm/mmap.c, fs/proc/task_mmu.c, and drivers/infiniband/core/uverbs_main.c. |
| CVE-2019-11487 | The Linux kernel before 5.1-rc5 allows page->_refcount reference count overflow, with resultant use-after-free issues, if about 140 GiB of RAM exists. This is related to fs/fuse/dev.c, fs/pipe.c, fs/splice.c, include/linux/mm.h, include/linux/pipe_fs_i.h, kernel/trace/trace.c, mm/gup.c, and mm/hugetlb.c. It can occur with FUSE requests. |
| CVE-2019-11486 | The Siemens R3964 line discipline driver in drivers/tty/n_r3964.c in the Linux kernel before 5.0.8 has multiple race conditions. |
| CVE-2019-11479 | Jonathan Looney discovered that the Linux kernel default MSS is hard-coded to 48 bytes. This allows a remote peer to fragment TCP resend queues significantly more than if a larger MSS were enforced. A remote attacker could use this to cause a denial of service. This has been fixed in stable kernel releases 4.4.182, 4.9.182, 4.14.127, 4.19.52, 5.1.11, and is fixed in commits 967c05aee439e6e5d7d805e195b3a20ef5c433d6 and 5f3e2bf008c2221478101ee72f5cb4654b9fc363. |
| CVE-2019-11478 | Jonathan Looney discovered that the TCP retransmission queue implementation in tcp_fragment in the Linux kernel could be fragmented when handling certain TCP Selective Acknowledgment (SACK) sequences. A remote attacker could use this to cause a denial of service. This has been fixed in stable kernel releases 4.4.182, 4.9.182, 4.14.127, 4.19.52, 5.1.11, and is fixed in commit f070ef2ac66716357066b683fb0baf55f8191a2e. |
| CVE-2019-11477 | Jonathan Looney discovered that the TCP_SKB_CB(skb)->tcp_gso_segs value was subject to an integer overflow in the Linux kernel when handling TCP Selective Acknowledgments (SACKs). A remote attacker could use this to cause a denial of service. This has been fixed in stable kernel releases 4.4.182, 4.9.182, 4.14.127, 4.19.52, 5.1.11, and is fixed in commit 3b4929f65b0d8249f19a50245cd88ed1a2f78cff. |
| CVE-2019-11191 | ** DISPUTED ** The Linux kernel through 5.0.7, when CONFIG_IA32_AOUT is enabled and ia32_aout is loaded, allows local users to bypass ASLR on setuid a.out programs (if any exist) because install_exec_creds() is called too late in load_aout_binary() in fs/binfmt_aout.c, and thus the ptrace_may_access() check has a race condition when reading /proc/pid/stat. NOTE: the software maintainer disputes that this is a vulnerability because ASLR for a.out format executables has never been supported. |
| CVE-2019-11190 | The Linux kernel before 4.8 allows local users to bypass ASLR on setuid programs (such as /bin/su) because install_exec_creds() is called too late in load_elf_binary() in fs/binfmt_elf.c, and thus the ptrace_may_access() check has a race condition when reading /proc/pid/stat. |
| CVE-2019-11165 | Improper conditions check in the Linux kernel driver for the Intel(R) FPGA SDK for OpenCL(TM) Pro Edition before version 19.4 may allow an authenticated user to potentially enable denial of service via local access. |
| CVE-2019-11085 | Insufficient input validation in Kernel Mode Driver in Intel(R) i915 Graphics for Linux before version 5.0 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| CVE-2019-10639 | The Linux kernel 4.x (starting from 4.1) and 5.x before 5.0.8 allows Information Exposure (partial kernel address disclosure), leading to a KASLR bypass. Specifically, it is possible to extract the KASLR kernel image offset using the IP ID values the kernel produces for connection-less protocols (e.g., UDP and ICMP). When such traffic is sent to multiple destination IP addresses, it is possible to obtain hash collisions (of indices to the counter array) and thereby obtain the hashing key (via enumeration). This key contains enough bits from a kernel address (of a static variable) so when the key is extracted (via enumeration), the offset of the kernel image is exposed. This attack can be carried out remotely, by the attacker forcing the target device to send UDP or ICMP (or certain other) traffic to attacker-controlled IP addresses. Forcing a server to send UDP traffic is trivial if the server is a DNS server. ICMP traffic is trivial if the server answers ICMP Echo requests (ping). For client targets, if the target visits the attacker's web page, then WebRTC or gQUIC can be used to force UDP traffic to attacker-controlled IP addresses. NOTE: this attack against KASLR became viable in 4.1 because IP ID generation was changed to have a dependency on an address associated with a network namespace. |
| CVE-2019-10638 | In the Linux kernel before 5.1.7, a device can be tracked by an attacker using the IP ID values the kernel produces for connection-less protocols (e.g., UDP and ICMP). When such traffic is sent to multiple destination IP addresses, it is possible to obtain hash collisions (of indices to the counter array) and thereby obtain the hashing key (via enumeration). An attack may be conducted by hosting a crafted web page that uses WebRTC or gQUIC to force UDP traffic to attacker-controlled IP addresses. |
| CVE-2019-10557 | Out-of-bound read in the wireless driver in the Linux kernel due to lack of check of buffer length. in Snapdragon Auto, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music in APQ8009, APQ8017, APQ8053, APQ8096AU, MDM9206, MDM9207C, MDM9607, MDM9650, MSM8996AU, QCA6174A, QCA6574AU, QCA9377, QCA9379, QCN7605, QCS605, SDA660, SDA845, SDM630, SDM636, SDM660, SDX20, SDX55, SXR1130 |
| CVE-2019-10220 | Linux kernel CIFS implementation, version 4.9.0 is vulnerable to a relative paths injection in directory entry lists. |
| CVE-2019-10207 | A flaw was found in the Linux kernel's Bluetooth implementation of UART, all versions kernel 3.x.x before 4.18.0 and kernel 5.x.x. An attacker with local access and write permissions to the Bluetooth hardware could use this flaw to issue a specially crafted ioctl function call and cause the system to crash. |
| CVE-2019-10142 | A flaw was found in the Linux kernel's freescale hypervisor manager implementation, kernel versions 5.0.x up to, excluding 5.0.17. A parameter passed to an ioctl was incorrectly validated and used in size calculations for the page size calculation. An attacker can use this flaw to crash the system, corrupt memory, or create other adverse security affects. |
| CVE-2019-10140 | A vulnerability was found in Linux kernel's, versions up to 3.10, implementation of overlayfs. An attacker with local access can create a denial of service situation via NULL pointer dereference in ovl_posix_acl_create function in fs/overlayfs/dir.c. This can allow attackers with ability to create directories on overlayfs to crash the kernel creating a denial of service (DOS). |
| CVE-2019-10126 | A flaw was found in the Linux kernel. A heap based buffer overflow in mwifiex_uap_parse_tail_ies function in drivers/net/wireless/marvell/mwifiex/ie.c might lead to memory corruption and possibly other consequences. |
| CVE-2019-10125 | An issue was discovered in aio_poll() in fs/aio.c in the Linux kernel through 5.0.4. A file may be released by aio_poll_wake() if an expected event is triggered immediately (e.g., by the close of a pair of pipes) after the return of vfs_poll(), and this will cause a use-after-free. |
| CVE-2019-10063 | Flatpak before 1.0.8, 1.1.x and 1.2.x before 1.2.4, and 1.3.x before 1.3.1 allows a sandbox bypass. Flatpak versions since 0.8.1 address CVE-2017-5226 by using a seccomp filter to prevent sandboxed apps from using the TIOCSTI ioctl, which could otherwise be used to inject commands into the controlling terminal so that they would be executed outside the sandbox after the sandboxed app exits. This fix was incomplete: on 64-bit platforms, the seccomp filter could be bypassed by an ioctl request number that has TIOCSTI in its 32 least significant bits and an arbitrary nonzero value in its 32 most significant bits, which the Linux kernel would treat as equivalent to TIOCSTI. |
| CVE-2019-0155 | Insufficient access control in a subsystem for Intel (R) processor graphics in 6th, 7th, 8th and 9th Generation Intel(R) Core(TM) Processor Families; Intel(R) Pentium(R) Processor J, N, Silver and Gold Series; Intel(R) Celeron(R) Processor J, N, G3900 and G4900 Series; Intel(R) Atom(R) Processor A and E3900 Series; Intel(R) Xeon(R) Processor E3-1500 v5 and v6, E-2100 and E-2200 Processor Families; Intel(R) Graphics Driver for Windows before 26.20.100.6813 (DCH) or 26.20.100.6812 and before 21.20.x.5077 (aka15.45.5077), i915 Linux Driver for Intel(R) Processor Graphics before versions 5.4-rc7, 5.3.11, 4.19.84, 4.14.154, 4.9.201, 4.4.201 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| CVE-2018-9422 | In get_futex_key of futex.c, there is a use-after-free due to improper locking. This could lead to local escalation of privilege with no additional privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android kernel Android ID: A-74250718 References: Upstream kernel. |
| CVE-2018-8897 | A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs. |
| CVE-2018-8822 | Incorrect buffer length handling in the ncp_read_kernel function in fs/ncpfs/ncplib_kernel.c in the Linux kernel through 4.15.11, and in drivers/staging/ncpfs/ncplib_kernel.c in the Linux kernel 4.16-rc through 4.16-rc6, could be exploited by malicious NCPFS servers to crash the kernel or execute code. |
| CVE-2018-8781 | The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c at the Linux kernel version 3.4 and up to and including 4.15 has an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space. |
| CVE-2018-8087 | Memory leak in the hwsim_new_radio_nl function in drivers/net/wireless/mac80211_hwsim.c in the Linux kernel through 4.15.9 allows local users to cause a denial of service (memory consumption) by triggering an out-of-array error case. |
| CVE-2018-8043 | The unimac_mdio_probe function in drivers/net/phy/mdio-bcm-unimac.c in the Linux kernel through 4.15.8 does not validate certain resource availability, which allows local users to cause a denial of service (NULL pointer dereference). |
| CVE-2018-7995 | ** DISPUTED ** Race condition in the store_int_with_restart() function in arch/x86/kernel/cpu/mcheck/mce.c in the Linux kernel through 4.15.7 allows local users to cause a denial of service (panic) by leveraging root access to write to the check_interval file in a /sys/devices/system/machinecheck/machinecheck<cpu number> directory. NOTE: a third party has indicated that this report is not security relevant. |
| CVE-2018-7757 | Memory leak in the sas_smp_get_phy_events function in drivers/scsi/libsas/sas_expander.c in the Linux kernel through 4.15.7 allows local users to cause a denial of service (memory consumption) via many read accesses to files in the /sys/class/sas_phy directory, as demonstrated by the /sys/class/sas_phy/phy-1:0:12/invalid_dword_count file. |
| CVE-2018-7755 | An issue was discovered in the fd_locked_ioctl function in drivers/block/floppy.c in the Linux kernel through 4.15.7. The floppy driver will copy a kernel pointer to user memory in response to the FDGETPRM ioctl. An attacker can send the FDGETPRM ioctl and use the obtained kernel pointer to discover the location of kernel code and data and bypass kernel security protections such as KASLR. |
| CVE-2018-7754 | The aoedisk_debugfs_show function in drivers/block/aoe/aoeblk.c in the Linux kernel through 4.16.4rc4 allows local users to obtain sensitive address information by reading "ffree: " lines in a debugfs file. |
| CVE-2018-7740 | The resv_map_release function in mm/hugetlb.c in the Linux kernel through 4.15.7 allows local users to cause a denial of service (BUG) via a crafted application that makes mmap system calls and has a large pgoff argument to the remap_file_pages system call. |
| CVE-2018-7566 | The Linux kernel 4.15 has a Buffer Overflow via an SNDRV_SEQ_IOCTL_SET_CLIENT_POOL ioctl write operation to /dev/snd/seq by a local user. |
| CVE-2018-7492 | A NULL pointer dereference was found in the net/rds/rdma.c __rds_rdma_map() function in the Linux kernel before 4.14.7 allowing local attackers to cause a system panic and a denial-of-service, related to RDS_GET_MR and RDS_GET_MR_FOR_DEST. |
| CVE-2018-7480 | The blkcg_init_queue function in block/blk-cgroup.c in the Linux kernel before 4.11 allows local users to cause a denial of service (double free) or possibly have unspecified other impact by triggering a creation failure. |
| CVE-2018-7273 | In the Linux kernel through 4.15.4, the floppy driver reveals the addresses of kernel functions and global variables using printk calls within the function show_floppy in drivers/block/floppy.c. An attacker can read this information from dmesg and use the addresses to find the locations of kernel code and data and bypass kernel security protections such as KASLR. |
| CVE-2018-7191 | In the tun subsystem in the Linux kernel before 4.13.14, dev_get_valid_name is not called before register_netdevice. This allows local users to cause a denial of service (NULL pointer dereference and panic) via an ioctl(TUNSETIFF) call with a dev name containing a / character. This is similar to CVE-2013-4343. |
| CVE-2018-6927 | The futex_requeue function in kernel/futex.c in the Linux kernel before 4.14.15 might allow attackers to cause a denial of service (integer overflow) or possibly have unspecified other impact by triggering a negative wake or requeue value. |
| CVE-2018-6920 | In FreeBSD before 11.1-STABLE(r332303), 11.1-RELEASE-p10, 10.4-STABLE(r332321), and 10.4-RELEASE-p9, due to insufficient initialization of memory copied to userland in the Linux subsystem and Atheros wireless driver, small amounts of kernel memory may be disclosed to userland processes. Unprivileged authenticated local users may be able to access small amounts of privileged kernel data. |
| CVE-2018-6559 | The Linux kernel, as used in Ubuntu 18.04 LTS and Ubuntu 18.10, allows local users to obtain names of files in which they would not normally be able to access via an overlayfs mount inside of a user namespace. |
| CVE-2018-6555 | The irda_setsockopt function in net/irda/af_irda.c and later in drivers/staging/irda/net/af_irda.c in the Linux kernel before 4.17 allows local users to cause a denial of service (ias_object use-after-free and system crash) or possibly have unspecified other impact via an AF_IRDA socket. |
| CVE-2018-6554 | Memory leak in the irda_bind function in net/irda/af_irda.c and later in drivers/staging/irda/net/af_irda.c in the Linux kernel before 4.17 allows local users to cause a denial of service (memory consumption) by repeatedly binding an AF_IRDA socket. |
| CVE-2018-6412 | In the function sbusfb_ioctl_helper() in drivers/video/fbdev/sbuslib.c in the Linux kernel through 4.15, an integer signedness error allows arbitrary information leakage for the FBIOPUTCMAP_SPARC and FBIOGETCMAP_SPARC commands. |
| CVE-2018-5995 | The pcpu_embed_first_chunk function in mm/percpu.c in the Linux kernel through 4.14.14 allows local users to obtain sensitive address information by reading dmesg data from a "pages/cpu" printk call. |
| CVE-2018-5953 | The swiotlb_print_info function in lib/swiotlb.c in the Linux kernel through 4.14.14 allows local users to obtain sensitive address information by reading dmesg data from a "software IO TLB" printk call. |
| CVE-2018-5919 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, a use after free issue in WLAN host driver can lead to device reboot. |
| CVE-2018-5910 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, a memory corruption can occur in kernel due to improper check in callers count parameter in display handlers. |
| CVE-2018-5909 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, buffer overflow occur may occur in display handlers due to lack of checking in buffer size before copying into it and will lead to memory corruption. |
| CVE-2018-5908 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, there is a possible buffer overflow in display function due to lack of buffer length validation before copying. |
| CVE-2018-5907 | Possible buffer overflow in msm_adsp_stream_callback_put due to lack of input validation of user-provided data that leads to integer overflow in all Android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the Linux kernel. |
| CVE-2018-5906 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, there is a possible buffer overflow in debugfs module due to lack of check in size of input before copying into buffer. |
| CVE-2018-5905 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, a race condition while accessing num of clients in DIAG services can lead to out of boundary access. |
| CVE-2018-5904 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while list traversal in LPM status driver for clean up, use after free vulnerability may occur. |
| CVE-2018-5899 | In Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05, whenever TDLS connection is setup, we are freeing the netbuf in ol_tx_completion_handler and after that, we are accessing it in NBUF_UPDATE_TX_PKT_COUNT causing a use after free. |
| CVE-2018-5898 | Integer overflow can occur in msm_pcm_adsp_stream_cmd_put() function if the user supplied data "param_length" goes beyond certain limit in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2018-5897 | While reading the data from buffer in dci_process_ctrl_status() there can be buffer over-read problem if the len is not checked correctly in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2018-5896 | In Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05, kernel panic may happen due to out-of-bound read, caused by not checking source buffer length against length of packet stream to be copied. |
| CVE-2018-5895 | Buffer over-read may happen in wma_process_utf_event() due to improper buffer length validation before writing into param_buf->num_wow_packet_buffer in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2018-5893 | While processing a message from firmware in htt_t2h_msg_handler_fast() in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05, a buffer overwrite can occur. |
| CVE-2018-5890 | If the fdt_totalsize is reported as 0 for the current device tree, it bypasses an error check for a valid device tree in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2018-5889 | While processing a compressed kernel image, a buffer overflow can occur in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2018-5888 | While processing the system path, an out of bounds access can occur in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2018-5887 | While processing the USB StrSerialDescriptor array, an array index out of bounds can occur in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2018-5886 | A pointer in an ADSPRPC command is not properly validated in all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android), which can lead to kernel memory being accessed. |
| CVE-2018-5873 | An issue was discovered in the __ns_get_path function in fs/nsfs.c in the Linux kernel before 4.11. Due to a race condition when accessing files, a Use After Free condition can occur. This also affects all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-07-05. |
| CVE-2018-5872 | While parsing over-the-air information elements in all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-07-05, the use of an out-of-range pointer offset can occur. |
| CVE-2018-5865 | While processing a debug log event from firmware in all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-07-05, an integer underflow and/or buffer over-read can occur. |
| CVE-2018-5864 | While processing a WMI_APFIND event in all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-07-05, a buffer over-read and information leak can potentially occur. |
| CVE-2018-5863 | If userspace provides a too-large WPA RSN IE length in wlan_hdd_cfg80211_set_ie(), a buffer overflow occurs in all Android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the Linux kernel. |
| CVE-2018-5862 | In __wlan_hdd_cfg80211_vendor_scan() in all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-07-05, when SCAN_SSIDS and QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES are parsed, a buffer overwrite can potentially occur. |
| CVE-2018-5861 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, existing checks in place on partition size are incomplete and can lead to heap overwrite vulnerabilities while loading a secure application from the boot loader. |
| CVE-2018-5860 | In the MDSS driver in all Android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the Linux kernel, a data structure may be used without being initialized correctly. |
| CVE-2018-5859 | Due to a race condition in the MDSS MDP driver in all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-07-05, a Use After Free condition can occur. |
| CVE-2018-5858 | In the audio debugfs in all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-07-05, out of bounds access can occur. |
| CVE-2018-5857 | In the WCD CPE codec, a Use After Free condition can occur in all Android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the Linux kernel. |
| CVE-2018-5856 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, due to a race condition, a Use After Free condition can occur in Audio. |
| CVE-2018-5855 | While padding or shrinking a nested wmi packet in all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-07-05, a buffer over-read can potentially occur. |
| CVE-2018-5854 | A stack-based buffer overflow can occur in fastboot from all Android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the Linux kernel. |
| CVE-2018-5853 | A race condition exists in a driver in all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-05-05 potentially leading to a use-after-free condition. |
| CVE-2018-5851 | Buffer over flow can occur while processing a HTT_T2H_MSG_TYPE_TX_COMPL_IND message with an out-of-range num_msdus value in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-5850 | In the function csr_update_fils_params_rso(), insufficient validation on a key length can result in an integer underflow leading to a buffer overflow in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-5849 | Due to a race condition in the QTEECOM driver in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel, when more than one HLOS client loads the same TA, a Use After Free condition can occur. |
| CVE-2018-5848 | In the function wmi_set_ie(), the length validation code does not handle unsigned integer overflow properly. As a result, a large value of the 'ie_len' argument can cause a buffer overflow in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-5847 | Early or late retirement of rotation requests can result in a Use After Free condition in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-5846 | A Use After Free condition can occur in the IPA driver whenever the IPA IOCTLs IPA_IOC_NOTIFY_WAN_UPSTREAM_ROUTE_ADD/IPA_IOC_NOTIFY_WAN_UPSTREAM_ROUTE_DEL/IPA_IOC_NOTIFY_WAN_EMBMS_CONNECTED are called in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-5845 | A race condition in drm_atomic_nonblocking_commit() in the display driver can potentially lead to a Use After Free scenario in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-5844 | In the video driver function set_output_buffers(), binfo can be accessed after being freed in a failure scenario in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-5843 | In the function wma_pdev_div_info_evt_handler() in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel, there is no upper bound check on the value event->num_chains_valid received from firmware which can lead to a buffer overwrite of the fixed size chain_rssi_result structure. |
| CVE-2018-5842 | An arbitrary address write can occur if a compromised WLAN firmware sends incorrect data to WLAN driver in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-5841 | dcc_curr_list is initialized with a default invalid value that is expected to be programmed by the user through a sysfs node which could lead to an invalid access in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-5840 | Buffer Copy without Checking Size of Input can occur during the DRM SDE driver initialization sequence in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-5836 | In wma_nan_rsp_event_handler() in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05, the data_len value is received from firmware and not properly validated which could potentially lead to an out-of-bounds access. |
| CVE-2018-5835 | If the seq_len is greater then CSR_MAX_RSC_LEN, a buffer overflow in __wlan_hdd_cfg80211_add_key() may occur when copying keyRSC in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2018-5834 | In __wlan_hdd_cfg80211_vendor_scan(), a buffer overwrite can potentially occur in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2018-5832 | Due to a race condition in a camera driver ioctl handler in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05, a Use After Free condition can occur. |
| CVE-2018-5831 | In the KGSL driver in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05, a reference counting error can lead to a Use After Free condition. |
| CVE-2018-5830 | While processing the HTT_T2H_MSG_TYPE_MGMT_TX_COMPL_IND message, a buffer overflow can potentially occur in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2018-5829 | In wlan_hdd_cfg80211_set_privacy_ibss() in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05, a buffer over-read can potentially occur. |
| CVE-2018-5828 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, in function wma_extscan_start_stop_event_handler(), vdev_id comes from the variable event from firmware and is not properly validated potentially leading to a buffer overwrite. |
| CVE-2018-5827 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, a buffer overflow vulnerability exists in WLAN while processing an extscan hotlist event. |
| CVE-2018-5826 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, due to a race condition, a Use After Free condition can occur in the WLAN driver. |
| CVE-2018-5825 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, in the kernel IPA driver, a Use After Free condition can occur. |
| CVE-2018-5824 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, while processing HTT_T2H_MSG_TYPE_RX_FLUSH or HTT_T2H_MSG_TYPE_RX_PN_IND messages, a buffer overflow can occur if the tid value obtained from the firmware is out of range. |
| CVE-2018-5823 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, improper buffer length validation in extscan hotlist event can lead to potential buffer overflow. |
| CVE-2018-5822 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, compromised WLAN FW can potentially cause a buffer overwrite. |
| CVE-2018-5821 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, in function wma_wow_wakeup_host_event(), wake_info->vdev_id is received from FW and is used directly as array index to access wma->interfaces whose max index should be (max_bssid-1). If wake_info->vdev_id is greater than or equal to max_bssid, an out-of-bounds read occurs. |
| CVE-2018-5820 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, in the function wma_tbttoffset_update_event_handler(), a parameter received from firmware is used to allocate memory for a local buffer and is not properly validated. This can potentially result in an integer overflow subsequently leading to a heap overwrite. |
| CVE-2018-5814 | In the Linux Kernel before version 4.16.11, 4.14.43, 4.9.102, and 4.4.133, multiple race condition errors when handling probe, disconnect, and rebind operations can be exploited to trigger a use-after-free condition or a NULL pointer dereference by sending multiple USB over IP packets. |
| CVE-2018-5803 | In the Linux Kernel before version 4.15.8, 4.14.25, 4.9.87, 4.4.121, 4.1.51, and 3.2.102, an error in the "_sctp_make_chunk()" function (net/sctp/sm_make_chunk.c) when handling SCTP packets length can be exploited to cause a kernel crash. |
| CVE-2018-5750 | The acpi_smbus_hc_add function in drivers/acpi/sbshc.c in the Linux kernel through 4.14.15 allows local users to obtain sensitive address information by reading dmesg data from an SBS HC printk call. |
| CVE-2018-5703 | The tcp_v6_syn_recv_sock function in net/ipv6/tcp_ipv6.c in the Linux kernel through 4.14.11 allows attackers to cause a denial of service (slab out-of-bounds write) or possibly have unspecified other impact via vectors involving TLS. |
| CVE-2018-5391 | The Linux kernel, versions 3.9+, is vulnerable to a denial of service attack with low rates of specially modified packets targeting IP fragment re-assembly. An attacker may cause a denial of service condition by sending specially crafted IP fragments. Various vulnerabilities in IP fragmentation have been discovered and fixed over the years. The current vulnerability (CVE-2018-5391) became exploitable in the Linux kernel with the increase of the IP fragment reassembly queue size. |
| CVE-2018-5390 | Linux kernel versions 4.9+ can be forced to make very expensive calls to tcp_collapse_ofo_queue() and tcp_prune_ofo_queue() for every incoming packet which can lead to a denial of service. |
| CVE-2018-5344 | In the Linux kernel through 4.14.13, drivers/block/loop.c mishandles lo_release serialization, which allows attackers to cause a denial of service (__lock_acquire use-after-free) or possibly have unspecified other impact. |
| CVE-2018-5333 | In the Linux kernel through 4.14.13, the rds_cmsg_atomic function in net/rds/rdma.c mishandles cases where page pinning fails or an invalid address is supplied, leading to an rds_atomic_free_op NULL pointer dereference. |
| CVE-2018-5332 | In the Linux kernel through 3.2, the rds_message_alloc_sgs() function does not validate a value that is used during DMA page allocation, leading to a heap-based out-of-bounds write (related to the rds_rdma_extra_size function in net/rds/rdma.c). |
| CVE-2018-3639 | Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis, aka Speculative Store Bypass (SSB), Variant 4. |
| CVE-2018-3599 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, while notifying a DCI client, a Use After Free condition can occur. |
| CVE-2018-3598 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, insufficient validation of parameters from userspace in the camera driver can lead to information leak and out-of-bounds access. |
| CVE-2018-3597 | In the ADSP RPC driver in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05, an arbitrary kernel write can occur. |
| CVE-2018-3596 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, legacy code vulnerable after migration has been removed. |
| CVE-2018-3587 | In a firmware memory dump feature in all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android), a Use After Free condition can occur. |
| CVE-2018-3586 | An integer overflow to buffer overflow vulnerability exists in the ADSPRPC heap manager in all Android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the Linux kernel. |
| CVE-2018-3584 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, a Use After Free condition can occur in the function rmnet_usb_ctrl_init(). |
| CVE-2018-3582 | Buffer overflow can occur due to improper input validation in multiple WMA event handler functions in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-3581 | In the WLAN driver in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel, a buffer overwrite can occur if the vdev_id received from firmware is larger than max_bssid. |
| CVE-2018-3580 | Stack-based buffer overflow can occur In the WLAN driver if the pmkid_count value is larger than the PMKIDCache size in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-3579 | In the WLAN driver in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel, event->num_entries_in_page is a value received from firmware that is not properly validated which can lead to a buffer over-read |
| CVE-2018-3578 | Type mismatch for ie_len can cause the WLAN driver to allocate less memory on the heap due to implicit casting leading to a heap buffer overflow in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-3577 | While processing fragments, when the fragment count becomes very large, an integer overflow leading to a buffer overflow can occur in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2018-3576 | improper validation of array index in WiFi driver function sapInterferenceRssiCount() leads to array out-of-bounds access in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-3574 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, userspace can request ION cache maintenance on a secure ION buffer for which the ION_FLAG_SECURE ion flag is not set and cause the kernel to attempt to perform cache maintenance on memory which does not belong to HLOS. |
| CVE-2018-3573 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while relocating kernel images with a specially crafted boot image, an out of bounds access can occur. |
| CVE-2018-3572 | While processing a DSP buffer in an audio driver's event handler, an index of a buffer is not checked before accessing the buffer in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-3571 | In the KGSL driver in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel, a Use After Free condition can occur when printing information about sparse memory allocations |
| CVE-2018-3570 | In the cpuidle driver in all Android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the Linux kernel, the list_for_each macro was not used correctly which could lead to an untrusted pointer dereference. |
| CVE-2018-3569 | A buffer over-read can occur during a fast initial link setup (FILS) connection in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2018-3568 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, in __wlan_hdd_cfg80211_vendor_scan(), a buffer overwrite can potentially occur. |
| CVE-2018-3567 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, a buffer overflow vulnerability exists in WLAN while processing the HTT_T2H_MSG_TYPE_PEER_MAP or HTT_T2H_MSG_TYPE_PEER_UNMAP messages. |
| CVE-2018-3566 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, a buffer overwrite may occur in ProcSetReqInternal() due to missing length check. |
| CVE-2018-3565 | While sending a probe request indication in lim_send_sme_probe_req_ind() in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel, a buffer overflow can occur. |
| CVE-2018-3564 | In the FastRPC driver in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05, a Use After Free condition can occur when mapping on the remote processor fails. |
| CVE-2018-3563 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, untrusted pointer dereference in apr_cb_func can lead to an arbitrary code execution. |
| CVE-2018-3562 | Buffer over -read can occur while processing a FILS authentication frame in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2018-3561 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a race condition in diag_ioctl_lsm_deinit() leads to a Use After Free condition. |
| CVE-2018-3560 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a Double Free vulnerability exists in Audio Driver while opening a sound compression device. |
| CVE-2018-25020 | The BPF subsystem in the Linux kernel before 4.17 mishandles situations with a long jump over an instruction sequence where inner instructions require substantial expansions into multiple BPF instructions, leading to an overflow. This affects kernel/bpf/core.c and net/core/filter.c. |
| CVE-2018-25015 | An issue was discovered in the Linux kernel before 4.14.16. There is a use-after-free in net/sctp/socket.c for a held lock after a peel off, aka CID-a0ff660058b8. |
| CVE-2018-21008 | An issue was discovered in the Linux kernel before 4.16.7. A use-after-free can be caused by the function rsi_mac80211_detach in the file drivers/net/wireless/rsi/rsi_91x_mac80211.c. |
| CVE-2018-20976 | An issue was discovered in fs/xfs/xfs_super.c in the Linux kernel before 4.18. A use after free exists, related to xfs_fs_fill_super failure. |
| CVE-2018-20961 | In the Linux kernel before 4.16.4, a double free vulnerability in the f_midi_set_alt function of drivers/usb/gadget/function/f_midi.c in the f_midi driver may allow attackers to cause a denial of service or possibly have unspecified other impact. |
| CVE-2018-20856 | An issue was discovered in the Linux kernel before 4.18.7. In block/blk-core.c, there is an __blk_drain_queue() use-after-free because a certain error case is mishandled. |
| CVE-2018-20855 | An issue was discovered in the Linux kernel before 4.18.7. In create_qp_common in drivers/infiniband/hw/mlx5/qp.c, mlx5_ib_create_qp_resp was never initialized, resulting in a leak of stack memory to userspace. |
| CVE-2018-20854 | An issue was discovered in the Linux kernel before 4.20. drivers/phy/mscc/phy-ocelot-serdes.c has an off-by-one error with a resultant ctrl->phys out-of-bounds read. |
| CVE-2018-20836 | An issue was discovered in the Linux kernel before 4.20. There is a race condition in smp_task_timedout() and smp_task_done() in drivers/scsi/libsas/sas_expander.c, leading to a use-after-free. |
| CVE-2018-20784 | In the Linux kernel before 4.20.2, kernel/sched/fair.c mishandles leaf cfs_rq's, which allows attackers to cause a denial of service (infinite loop in update_blocked_averages) or possibly have unspecified other impact by inducing a high load. |
| CVE-2018-20669 | An issue where a provided address with access_ok() is not checked was discovered in i915_gem_execbuffer2_ioctl in drivers/gpu/drm/i915/i915_gem_execbuffer.c in the Linux kernel through 4.19.13. A local attacker can craft a malicious IOCTL function call to overwrite arbitrary kernel memory, resulting in a Denial of Service or privilege escalation. |
| CVE-2018-20511 | An issue was discovered in the Linux kernel before 4.18.11. The ipddp_ioctl function in drivers/net/appletalk/ipddp.c allows local users to obtain sensitive kernel address information by leveraging CAP_NET_ADMIN to read the ipddp_route dev and next fields via an SIOCFINDIPDDPRT ioctl call. |
| CVE-2018-20510 | The print_binder_transaction_ilocked function in drivers/android/binder.c in the Linux kernel 4.14.90 allows local users to obtain sensitive address information by reading "*from *code *flags" lines in a debugfs file. |
| CVE-2018-20509 | The print_binder_ref_olocked function in drivers/android/binder.c in the Linux kernel 4.14.90 allows local users to obtain sensitive address information by reading " ref *desc *node" lines in a debugfs file. |
| CVE-2018-20449 | The hidma_chan_stats function in drivers/dma/qcom/hidma_dbg.c in the Linux kernel 4.14.90 allows local users to obtain sensitive address information by reading "callback=" lines in a debugfs file. |
| CVE-2018-20169 | An issue was discovered in the Linux kernel before 4.19.9. The USB subsystem mishandles size checks during the reading of an extra descriptor, related to __usb_get_extra_descriptor in drivers/usb/core/usb.c. |
| CVE-2018-19985 | The function hso_get_config_data in drivers/net/usb/hso.c in the Linux kernel through 4.19.8 reads if_num from the USB device (as a u8) and uses it to index a small array, resulting in an object out-of-bounds (OOB) read that potentially allows arbitrary read in the kernel address space. |
| CVE-2018-19854 | An issue was discovered in the Linux kernel before 4.19.3. crypto_report_one() and related functions in crypto/crypto_user.c (the crypto user configuration API) do not fully initialize structures that are copied to userspace, potentially leaking sensitive memory to user programs. NOTE: this is a CVE-2013-2547 regression but with easier exploitability because the attacker does not need a capability (however, the system must have the CONFIG_CRYPTO_USER kconfig option). |
| CVE-2018-19824 | In the Linux kernel through 4.19.6, a local user could exploit a use-after-free in the ALSA driver by supplying a malicious USB Sound device (with zero interfaces) that is mishandled in usb_audio_probe in sound/usb/card.c. |
| CVE-2018-19407 | The vcpu_scan_ioapic function in arch/x86/kvm/x86.c in the Linux kernel through 4.19.2 allows local users to cause a denial of service (NULL pointer dereference and BUG) via crafted system calls that reach a situation where ioapic is uninitialized. |
| CVE-2018-19406 | kvm_pv_send_ipi in arch/x86/kvm/lapic.c in the Linux kernel through 4.19.2 allows local users to cause a denial of service (NULL pointer dereference and BUG) via crafted system calls that reach a situation where the apic map is uninitialized. |
| CVE-2018-18955 | In the Linux kernel 4.15.x through 4.19.x before 4.19.2, map_write() in kernel/user_namespace.c allows privilege escalation because it mishandles nested user namespaces with more than 5 UID or GID ranges. A user who has CAP_SYS_ADMIN in an affected user namespace can bypass access controls on resources outside the namespace, as demonstrated by reading /etc/shadow. This occurs because an ID transformation takes place properly for the namespaced-to-kernel direction but not for the kernel-to-namespaced direction. |
| CVE-2018-18710 | An issue was discovered in the Linux kernel through 4.19. An information leak in cdrom_ioctl_select_disc in drivers/cdrom/cdrom.c could be used by local attackers to read kernel memory because a cast from unsigned long to int interferes with bounds checking. This is similar to CVE-2018-10940 and CVE-2018-16658. |
| CVE-2018-18690 | In the Linux kernel before 4.17, a local attacker able to set attributes on an xfs filesystem could make this filesystem non-operational until the next mount by triggering an unchecked error condition during an xfs attribute change, because xfs_attr_shortform_addname in fs/xfs/libxfs/xfs_attr.c mishandles ATTR_REPLACE operations with conversion of an attr from short to long form. |
| CVE-2018-18653 | The Linux kernel, as used in Ubuntu 18.10 and when booted with UEFI Secure Boot enabled, allows privileged local users to bypass intended Secure Boot restrictions and execute untrusted code by loading arbitrary kernel modules. This occurs because a modified kernel/module.c, in conjunction with certain configuration options, leads to mishandling of the result of signature verification. |
| CVE-2018-18559 | In the Linux kernel through 4.19, a use-after-free can occur due to a race condition between fanout_add from setsockopt and bind on an AF_PACKET socket. This issue exists because of the 15fe076edea787807a7cdc168df832544b58eba6 incomplete fix for a race condition. The code mishandles a certain multithreaded case involving a packet_do_bind unregister action followed by a packet_notifier register action. Later, packet_release operates on only one of the two applicable linked lists. The attacker can achieve Program Counter control. |
| CVE-2018-18445 | In the Linux kernel 4.14.x, 4.15.x, 4.16.x, 4.17.x, and 4.18.x before 4.18.13, faulty computation of numeric bounds in the BPF verifier permits out-of-bounds memory accesses because adjust_scalar_min_max_vals in kernel/bpf/verifier.c mishandles 32-bit right shifts. |
| CVE-2018-18397 | The userfaultfd implementation in the Linux kernel before 4.19.7 mishandles access control for certain UFFDIO_ ioctl calls, as demonstrated by allowing local users to write data into holes in a tmpfs file (if the user has read-only access to that file, and that file contains holes), related to fs/userfaultfd.c and mm/userfaultfd.c. |
| CVE-2018-18386 | drivers/tty/n_tty.c in the Linux kernel before 4.14.11 allows local attackers (who are able to access pseudo terminals) to hang/block further usage of any pseudo terminal devices due to an EXTPROC versus ICANON confusion in TIOCINQ. |
| CVE-2018-18281 | Since Linux kernel version 3.2, the mremap() syscall performs TLB flushes after dropping pagetable locks. If a syscall such as ftruncate() removes entries from the pagetables of a task that is in the middle of mremap(), a stale TLB entry can remain for a short time that permits access to a physical page after it has been released back to the page allocator and reused. This is fixed in the following kernel versions: 4.9.135, 4.14.78, 4.18.16, 4.19. |
| CVE-2018-18021 | arch/arm64/kvm/guest.c in KVM in the Linux kernel before 4.18.12 on the arm64 platform mishandles the KVM_SET_ON_REG ioctl. This is exploitable by attackers who can create virtual machines. An attacker can arbitrarily redirect the hypervisor flow of control (with full register control). An attacker can also cause a denial of service (hypervisor panic) via an illegal exception return. This occurs because of insufficient restrictions on userspace access to the core register file, and because PSTATE.M validation does not prevent unintended execution modes. |
| CVE-2018-17977 | The Linux kernel 4.14.67 mishandles certain interaction among XFRM Netlink messages, IPPROTO_AH packets, and IPPROTO_IP packets, which allows local users to cause a denial of service (memory consumption and system hang) by leveraging root access to execute crafted applications, as demonstrated on CentOS 7. |
| CVE-2018-17972 | An issue was discovered in the proc_pid_stack function in fs/proc/base.c in the Linux kernel through 4.18.11. It does not ensure that only root may inspect the kernel stack of an arbitrary task, allowing a local attacker to exploit racy stack unwinding and leak kernel task stack contents. |
| CVE-2018-17182 | An issue was discovered in the Linux kernel through 4.18.8. The vmacache_flush_all function in mm/vmacache.c mishandles sequence number overflows. An attacker can trigger a use-after-free (and possibly gain privileges) via certain thread creation, map, unmap, invalidation, and dereference operations. |
| CVE-2018-16885 | A flaw was found in the Linux kernel that allows the userspace to call memcpy_fromiovecend() and similar functions with a zero offset and buffer length which causes the read beyond the buffer boundaries, in certain cases causing a memory access fault and a system halt by accessing invalid memory address. This issue only affects kernel version 3.10.x as shipped with Red Hat Enterprise Linux 7. |
| CVE-2018-16884 | A flaw was found in the Linux kernel's NFS41+ subsystem. NFS41+ shares mounted in different network namespaces at the same time can make bc_svc_process() use wrong back-channel IDs and cause a use-after-free vulnerability. Thus a malicious container user can cause a host kernel memory corruption and a system panic. Due to the nature of the flaw, privilege escalation cannot be fully ruled out. |
| CVE-2018-16882 | A use-after-free issue was found in the way the Linux kernel's KVM hypervisor processed posted interrupts when nested(=1) virtualization is enabled. In nested_get_vmcs12_pages(), in case of an error while processing posted interrupt address, it unmaps the 'pi_desc_page' without resetting 'pi_desc' descriptor address, which is later used in pi_test_and_clear_on(). A guest user/process could use this flaw to crash the host kernel resulting in DoS or potentially gain privileged access to a system. Kernel versions before 4.14.91 and before 4.19.13 are vulnerable. |
| CVE-2018-16880 | A flaw was found in the Linux kernel's handle_rx() function in the [vhost_net] driver. A malicious virtual guest, under specific conditions, can trigger an out-of-bounds write in a kmalloc-8 slab on a virtual host which may lead to a kernel memory corruption and a system panic. Due to the nature of the flaw, privilege escalation cannot be fully ruled out. Versions from v4.16 and newer are vulnerable. |
| CVE-2018-16871 | A flaw was found in the Linux kernel's NFS implementation, all versions 3.x and all versions 4.x up to 4.20. An attacker, who is able to mount an exported NFS filesystem, is able to trigger a null pointer dereference by using an invalid NFS sequence. This can panic the machine and deny access to the NFS server. Any outstanding disk writes to the NFS server will be lost. |
| CVE-2018-16862 | A security flaw was found in the Linux kernel in a way that the cleancache subsystem clears an inode after the final file truncation (removal). The new file created with the same inode may contain leftover pages from cleancache and the old file data instead of the new one. |
| CVE-2018-16658 | An issue was discovered in the Linux kernel before 4.18.6. An information leak in cdrom_ioctl_drive_status in drivers/cdrom/cdrom.c could be used by local attackers to read kernel memory because a cast from unsigned long to int interferes with bounds checking. This is similar to CVE-2018-10940. |
| CVE-2018-16597 | An issue was discovered in the Linux kernel before 4.8. Incorrect access checking in overlayfs mounts could be used by local attackers to modify or truncate files in the underlying filesystem. |
| CVE-2018-16276 | An issue was discovered in yurex_read in drivers/usb/misc/yurex.c in the Linux kernel before 4.17.7. Local attackers could use user access read/writes with incorrect bounds checking in the yurex USB driver to crash the kernel or potentially escalate privileges. |
| CVE-2018-15594 | arch/x86/kernel/paravirt.c in the Linux kernel before 4.18.1 mishandles certain indirect calls, which makes it easier for attackers to conduct Spectre-v2 attacks against paravirtual guests. |
| CVE-2018-15572 | The spectre_v2_select_mitigation function in arch/x86/kernel/cpu/bugs.c in the Linux kernel before 4.18.1 does not always fill RSB upon a context switch, which makes it easier for attackers to conduct userspace-userspace spectreRSB attacks. |
| CVE-2018-15471 | An issue was discovered in xenvif_set_hash_mapping in drivers/net/xen-netback/hash.c in the Linux kernel through 4.18.1, as used in Xen through 4.11.x and other products. The Linux netback driver allows frontends to control mapping of requests to request queues. When processing a request to set or change this mapping, some input validation (e.g., for an integer overflow) was missing or flawed, leading to OOB access in hash handling. A malicious or buggy frontend may cause the (usually privileged) backend to make out of bounds memory accesses, potentially resulting in one or more of privilege escalation, Denial of Service (DoS), or information leaks. |
| CVE-2018-14734 | drivers/infiniband/core/ucma.c in the Linux kernel through 4.17.11 allows ucma_leave_multicast to access a certain data structure after a cleanup step in ucma_process_join, which allows attackers to cause a denial of service (use-after-free). |
| CVE-2018-14678 | An issue was discovered in the Linux kernel through 4.17.11, as used in Xen through 4.11.x. The xen_failsafe_callback entry point in arch/x86/entry/entry_64.S does not properly maintain RBX, which allows local users to cause a denial of service (uninitialized memory usage and system crash). Within Xen, 64-bit x86 PV Linux guest OS users can trigger a guest OS crash or possibly gain privileges. |
| CVE-2018-14656 | A missing address check in the callers of the show_opcodes() in the Linux kernel allows an attacker to dump the kernel memory at an arbitrary kernel address into the dmesg log. |
| CVE-2018-14646 | The Linux kernel before 4.15-rc8 was found to be vulnerable to a NULL pointer dereference bug in the __netlink_ns_capable() function in the net/netlink/af_netlink.c file. A local attacker could exploit this when a net namespace with a netnsid is assigned to cause a kernel panic and a denial of service. |
| CVE-2018-14641 | A security flaw was found in the ip_frag_reasm() function in net/ipv4/ip_fragment.c in the Linux kernel from 4.19-rc1 to 4.19-rc3 inclusive, which can cause a later system crash in ip_do_fragment(). With certain non-default, but non-rare, configuration of a victim host, an attacker can trigger this crash remotely, thus leading to a remote denial-of-service. |
| CVE-2018-14634 | An integer overflow flaw was found in the Linux kernel's create_elf_tables() function. An unprivileged local user with access to SUID (or otherwise privileged) binary could use this flaw to escalate their privileges on the system. Kernel versions 2.6.x, 3.10.x and 4.14.x are believed to be vulnerable. |
| CVE-2018-14633 | A security flaw was found in the chap_server_compute_md5() function in the ISCSI target code in the Linux kernel in a way an authentication request from an ISCSI initiator is processed. An unauthenticated remote attacker can cause a stack buffer overflow and smash up to 17 bytes of the stack. The attack requires the iSCSI target to be enabled on the victim host. Depending on how the target's code was built (i.e. depending on a compiler, compile flags and hardware architecture) an attack may lead to a system crash and thus to a denial-of-service or possibly to a non-authorized access to data exported by an iSCSI target. Due to the nature of the flaw, privilege escalation cannot be fully ruled out, although we believe it is highly unlikely. Kernel versions 4.18.x, 4.14.x and 3.10.x are believed to be vulnerable. |
| CVE-2018-14625 | A flaw was found in the Linux Kernel where an attacker may be able to have an uncontrolled read to kernel-memory from within a vm guest. A race condition between connect() and close() function may allow an attacker using the AF_VSOCK protocol to gather a 4 byte information leak or possibly intercept or corrupt AF_VSOCK messages destined to other clients. |
| CVE-2018-14619 | A flaw was found in the crypto subsystem of the Linux kernel before version kernel-4.15-rc4. The "null skcipher" was being dropped when each af_alg_ctx was freed instead of when the aead_tfm was freed. This can cause the null skcipher to be freed while it is still in use leading to a local user being able to crash the system or possibly escalate privileges. |
| CVE-2018-14617 | An issue was discovered in the Linux kernel through 4.17.10. There is a NULL pointer dereference and panic in hfsplus_lookup() in fs/hfsplus/dir.c when opening a file (that is purportedly a hard link) in an hfs+ filesystem that has malformed catalog data, and is mounted read-only without a metadata directory. |
| CVE-2018-14616 | An issue was discovered in the Linux kernel through 4.17.10. There is a NULL pointer dereference in fscrypt_do_page_crypto() in fs/crypto/crypto.c when operating on a file in a corrupted f2fs image. |
| CVE-2018-14615 | An issue was discovered in the Linux kernel through 4.17.10. There is a buffer overflow in truncate_inline_inode() in fs/f2fs/inline.c when umounting an f2fs image, because a length value may be negative. |
| CVE-2018-14614 | An issue was discovered in the Linux kernel through 4.17.10. There is an out-of-bounds access in __remove_dirty_segment() in fs/f2fs/segment.c when mounting an f2fs image. |
| CVE-2018-14613 | An issue was discovered in the Linux kernel through 4.17.10. There is an invalid pointer dereference in io_ctl_map_page() when mounting and operating a crafted btrfs image, because of a lack of block group item validation in check_leaf_item in fs/btrfs/tree-checker.c. |
| CVE-2018-14612 | An issue was discovered in the Linux kernel through 4.17.10. There is an invalid pointer dereference in btrfs_root_node() when mounting a crafted btrfs image, because of a lack of chunk block group mapping validation in btrfs_read_block_groups in fs/btrfs/extent-tree.c, and a lack of empty-tree checks in check_leaf in fs/btrfs/tree-checker.c. |
| CVE-2018-14611 | An issue was discovered in the Linux kernel through 4.17.10. There is a use-after-free in try_merge_free_space() when mounting a crafted btrfs image, because of a lack of chunk type flag checks in btrfs_check_chunk_valid in fs/btrfs/volumes.c. |
| CVE-2018-14610 | An issue was discovered in the Linux kernel through 4.17.10. There is out-of-bounds access in write_extent_buffer() when mounting and operating a crafted btrfs image, because of a lack of verification that each block group has a corresponding chunk at mount time, within btrfs_read_block_groups in fs/btrfs/extent-tree.c. |
| CVE-2018-14609 | An issue was discovered in the Linux kernel through 4.17.10. There is an invalid pointer dereference in __del_reloc_root() in fs/btrfs/relocation.c when mounting a crafted btrfs image, related to removing reloc rb_trees when reloc control has not been initialized. |
| CVE-2018-13893 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Out of bound mask range access caused by using possible old value of msg mask table count while copying masks to userspace. |
| CVE-2018-13889 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Heap memory was accessed after it was freed |
| CVE-2018-13406 | An integer overflow in the uvesafb_setcmap function in drivers/video/fbdev/uvesafb.c in the Linux kernel before 4.17.4 could result in local attackers being able to crash the kernel or potentially elevate privileges because kmalloc_array is not used. |
| CVE-2018-13405 | The inode_init_owner function in fs/inode.c in the Linux kernel through 3.16 allows local users to create files with an unintended group ownership, in a scenario where a directory is SGID to a certain group and is writable by a user who is not a member of that group. Here, the non-member can trigger creation of a plain file whose group ownership is that group. The intended behavior was that the non-member can trigger creation of a directory (but not a plain file) whose group ownership is that group. The non-member can escalate privileges by making the plain file executable and SGID. |
| CVE-2018-13100 | An issue was discovered in fs/f2fs/super.c in the Linux kernel through 4.17.3, which does not properly validate secs_per_zone in a corrupted f2fs image, as demonstrated by a divide-by-zero error. |
| CVE-2018-13099 | An issue was discovered in fs/f2fs/inline.c in the Linux kernel through 4.4. A denial of service (out-of-bounds memory access and BUG) can occur for a modified f2fs filesystem image in which an inline inode contains an invalid reserved blkaddr. |
| CVE-2018-13098 | An issue was discovered in fs/f2fs/inode.c in the Linux kernel through 4.17.3. A denial of service (slab out-of-bounds read and BUG) can occur for a modified f2fs filesystem image in which FI_EXTRA_ATTR is set in an inode. |
| CVE-2018-13097 | An issue was discovered in fs/f2fs/super.c in the Linux kernel through 4.17.3. There is an out-of-bounds read or a divide-by-zero error for an incorrect user_block_count in a corrupted f2fs image, leading to a denial of service (BUG). |
| CVE-2018-13096 | An issue was discovered in fs/f2fs/super.c in the Linux kernel through 4.14. A denial of service (out-of-bounds memory access and BUG) can occur upon encountering an abnormal bitmap size when mounting a crafted f2fs image. |
| CVE-2018-13095 | An issue was discovered in fs/xfs/libxfs/xfs_inode_buf.c in the Linux kernel through 4.17.3. A denial of service (memory corruption and BUG) can occur for a corrupted xfs image upon encountering an inode that is in extent format, but has more extents than fit in the inode fork. |
| CVE-2018-13094 | An issue was discovered in fs/xfs/libxfs/xfs_attr_leaf.c in the Linux kernel through 4.17.3. An OOPS may occur for a corrupted xfs image after xfs_da_shrink_inode() is called with a NULL bp. |
| CVE-2018-13093 | An issue was discovered in fs/xfs/xfs_icache.c in the Linux kernel through 4.17.3. There is a NULL pointer dereference and panic in lookup_slow() on a NULL inode->i_ops pointer when doing pathwalks on a corrupted xfs image. This occurs because of a lack of proper validation that cached inodes are free during allocation. |
| CVE-2018-13053 | The alarm_timer_nsleep function in kernel/time/alarmtimer.c in the Linux kernel through 4.17.3 has an integer overflow via a large relative timeout because ktime_add_safe is not used. |
| CVE-2018-12931 | ntfs_attr_find in the ntfs.ko filesystem driver in the Linux kernel 4.15.0 allows attackers to trigger a stack-based out-of-bounds write and cause a denial of service (kernel oops or panic) or possibly have unspecified other impact via a crafted ntfs filesystem. |
| CVE-2018-12930 | ntfs_end_buffer_async_read in the ntfs.ko filesystem driver in the Linux kernel 4.15.0 allows attackers to trigger a stack-based out-of-bounds write and cause a denial of service (kernel oops or panic) or possibly have unspecified other impact via a crafted ntfs filesystem. |
| CVE-2018-12929 | ntfs_read_locked_inode in the ntfs.ko filesystem driver in the Linux kernel 4.15.0 allows attackers to trigger a use-after-free read and possibly cause a denial of service (kernel oops or panic) via a crafted ntfs filesystem. |
| CVE-2018-12928 | In the Linux kernel 4.15.0, a NULL pointer dereference was discovered in hfs_ext_read_extent in hfs.ko. This can occur during a mount of a crafted hfs filesystem. |
| CVE-2018-12904 | In arch/x86/kvm/vmx.c in the Linux kernel before 4.17.2, when nested virtualization is used, local attackers could cause L1 KVM guests to VMEXIT, potentially allowing privilege escalations and denial of service attacks due to lack of checking of CPL. |
| CVE-2018-12896 | An issue was discovered in the Linux kernel through 4.17.3. An Integer Overflow in kernel/time/posix-timers.c in the POSIX timer code is caused by the way the overrun accounting works. Depending on interval and expiry time values, the overrun can be larger than INT_MAX, but the accounting is int based. This basically makes the accounting values, which are visible to user space via timer_getoverrun(2) and siginfo::si_overrun, random. For example, a local user can cause a denial of service (signed integer overflow) via crafted mmap, futex, timer_create, and timer_settime system calls. |
| CVE-2018-12714 | An issue was discovered in the Linux kernel through 4.17.2. The filter parsing in kernel/trace/trace_events_filter.c could be called with no filter, which is an N=0 case when it expected at least one line to have been read, thus making the N-1 index invalid. This allows attackers to cause a denial of service (slab out-of-bounds write) or possibly have unspecified other impact via crafted perf_event_open and mmap system calls. |
| CVE-2018-12633 | An issue was discovered in the Linux kernel through 4.17.2. vbg_misc_device_ioctl() in drivers/virt/vboxguest/vboxguest_linux.c reads the same user data twice with copy_from_user. The header part of the user data is double-fetched, and a malicious user thread can tamper with the critical variables (hdr.size_in and hdr.size_out) in the header between the two fetches because of a race condition, leading to severe kernel errors, such as buffer over-accesses. This bug can cause a local denial of service and information leakage. |
| CVE-2018-12233 | In the ea_get function in fs/jfs/xattr.c in the Linux kernel through 4.17.1, a memory corruption bug in JFS can be triggered by calling setxattr twice with two different extended attribute names on the same file. This vulnerability can be triggered by an unprivileged user with the ability to create files and execute programs. A kmalloc call is incorrect, leading to slab-out-of-bounds in jfs_xattr. |
| CVE-2018-12232 | In net/socket.c in the Linux kernel through 4.17.1, there is a race condition between fchownat and close in cases where they target the same socket file descriptor, related to the sock_close and sockfs_setattr functions. fchownat does not increment the file descriptor reference count, which allows close to set the socket to NULL during fchownat's execution, leading to a NULL pointer dereference and system crash. |
| CVE-2018-12014 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Null pointer dereference vulnerability may occur due to missing NULL assignment in NAT module of freed pointer. |
| CVE-2018-12011 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Uninitialized data for socket address leads to information exposure. |
| CVE-2018-12010 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Absence of length sanity check may lead to possible stack overflow resulting in memory corruption in trustzone region. |
| CVE-2018-12006 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Users with no extra privileges can potentially access leaked data due to uninitialized padding present in display function. |
| CVE-2018-11995 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, a partition name-check variable is not reset for every iteration which may cause improper termination in the META image. |
| CVE-2018-11988 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Un-trusted pointer de-reference issue by accessing a variable which is already freed. |
| CVE-2018-11987 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, if there is an unlikely memory alloc failure for the secure pool in boot, it can result in wrong pointer access causing kernel panic. |
| CVE-2018-11986 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Possible buffer overflow in TX and RX FIFOs of microcontroller in camera subsystem used to exchange commands and messages between Micro FW and CPP driver. |
| CVE-2018-11985 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, When allocating heap using user supplied size, Possible heap overflow vulnerability due to integer overflow in roundup to native pointer. |
| CVE-2018-11984 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, A use after free condition and an out-of-bounds access can occur in the DIAG driver. |
| CVE-2018-11983 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Error in kernel observed while accessing freed mask pointers after reallocating memory for mask table. |
| CVE-2018-11965 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Anyone can execute proptrigger.sh which will lead to change in properties. |
| CVE-2018-11964 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Exposing the hashed content in /etc/passwd may lead to security issue. |
| CVE-2018-11963 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Buffer overread may occur due to non-null terminated strings while processing vsprintf in camera jpeg driver. |
| CVE-2018-11962 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Use-after-free issue in heap while loading audio effects config in audio effects factory. |
| CVE-2018-11961 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Possibility of accessing out of bound vector index When updating some GNSS configurations. |
| CVE-2018-11960 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, A use after free condition can occur in the SPS driver which can lead to error in kernel. |
| CVE-2018-11956 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper mounting lead to device node and executable to be run from /dsp/ which presents a potential security issue. |
| CVE-2018-11946 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, the UPnP daemon should not be running out of box because it enables port forwarding without authentication. |
| CVE-2018-11943 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while processing fastboot flash command, memory leak or unexpected behavior may occur due to processing of unintialized data buffers. |
| CVE-2018-11919 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, there is a potential heap overflow and memory corruption due to improper error handling in SOC infrastructure. |
| CVE-2018-11918 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, memory allocated is automatically released by the kernel if the 'probe' function fails with an error code. |
| CVE-2018-11914 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper access control can lead to device node and executable to be run from /systemrw/ which presents a potential security. |
| CVE-2018-11913 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper configuration of dev nodes may lead to potential security issue. |
| CVE-2018-11912 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper configuration of daemons may lead to unprivileged access. |
| CVE-2018-11911 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper configuration of script may lead to unprivileged access. |
| CVE-2018-11910 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper access control can lead to device node and executable to be run from /persist/ which presents a potential issue. |
| CVE-2018-11909 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper access control can lead to device node and executable to be run from /cache/ which presents a potential issue. |
| CVE-2018-11908 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper access control can lead to device node and executable to be run from /data/ which presents a potential issue. |
| CVE-2018-11907 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper access control can lead to device node and executable to be run from /firmware/ which presents a potential issue. |
| CVE-2018-11906 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, there is a security concern with default privileged access to ADB and debug-fs. |
| CVE-2018-11905 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Possible buffer overflow in WLAN function due to lack of input validation in values received from firmware. |
| CVE-2018-11904 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, asynchronous callbacks received a pointer to a callers local variable. Should the caller return early (e.g., timeout), the callback will dereference an invalid pointer. |
| CVE-2018-11903 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, lack of length validation check for value received from caller function used as an array index for WMA interfaces can lead to OOB write in WLAN HOST. |
| CVE-2018-11902 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, lack of length validation check for value received from firmware can lead to OOB access in WLAN HOST. |
| CVE-2018-11898 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while processing start bss request from upper layer, out of bounds read occurs if ssid length is greater than maximum. |
| CVE-2018-11897 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while processing diag event after associating to a network out of bounds read occurs if ssid of the network joined is greater than max limit. |
| CVE-2018-11895 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper length check Validation in WLAN function can lead to driver writes the default rsn capabilities to the memory not allocated to the frame. |
| CVE-2018-11894 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while processing preferred network offload scan results integer overflow may lead to buffer overflow when large frame length is received from FW. |
| CVE-2018-11893 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while processing vendor scan request, when input argument - length of request IEs is greater than maximum can lead to a buffer overflow. |
| CVE-2018-11891 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, lack of check on the length of array while accessing can lead to an out of bound read in WLAN HOST function. |
| CVE-2018-11889 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, when requesting rssi timeout, access invalid memory may occur since local variable 'context' stack data of wlan function is free. |
| CVE-2018-11886 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, lack of check while calculating the MPDU data length will cause an integer overflow and then to buffer overflow in WLAN function. |
| CVE-2018-11883 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, in policy mgr unit test if mode parameter in wlan function is given an out of bound value it can cause an out of bound access while accessing the PCL table. |
| CVE-2018-11878 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, possibility of invalid memory access while processing driver command in WLAN function. |
| CVE-2018-11869 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, lack of length validation check for value received from firmware can lead to buffer overflow in WMA handler. |
| CVE-2018-11868 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, lack of length validation check for value received from firmware can lead to buffer overflow in nan response event handler. |
| CVE-2018-11863 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, lack of check of input received from firmware to calculate the length of WMA roam synch buffer can lead to buffer overwrite during memcpy. |
| CVE-2018-11860 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, a potential buffer over flow could occur while processing the ndp event due to lack of check on the message length. |
| CVE-2018-11852 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper check In the WMA API for the inputs received from the firmware and then fills the same to the host structure will lead to OOB write. |
| CVE-2018-11851 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, lack of check on input received to calculate the buffer length can lead to out of bound write to kernel stack. |
| CVE-2018-11843 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, lack fo check on return value in WMA response handler can lead to potential use after free. |
| CVE-2018-11842 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, during wlan association, driver allocates memory. In case the mem allocation fails driver does a mem free though the memory was not allocated. |
| CVE-2018-11840 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while processing the WLAN driver command ioctl a temporary buffer used to construct the reply message may be freed twice. |
| CVE-2018-11836 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper length check can lead to out-of-bounds access in WLAN function. |
| CVE-2018-11832 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, lack of input size validation before copying to buffer in PMIC function can lead to heap overflow. |
| CVE-2018-11827 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper validation of array index in WMA roam synchronization handler can lead to OOB write. |
| CVE-2018-11826 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, lack of check on integer overflow while calculating memory can lead to Buffer overflow in WLAN ext scan handler. |
| CVE-2018-11823 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, freeing device memory in driver probe failure will result in double free issue in power module. |
| CVE-2018-11818 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, LUT configuration is passed down to driver from userspace via ioctl. Simultaneous update from userspace while kernel drivers are updating LUT registers can lead to race condition. |
| CVE-2018-11508 | The compat_get_timex function in kernel/compat.c in the Linux kernel before 4.16.9 allows local users to obtain sensitive information from kernel memory via adjtimex. |
| CVE-2018-11506 | The sr_do_ioctl function in drivers/scsi/sr_ioctl.c in the Linux kernel through 4.16.12 allows local users to cause a denial of service (stack-based buffer overflow) or possibly have unspecified other impact because sense buffers have different sizes at the CDROM layer and the SCSI layer, as demonstrated by a CDROMREADMODE2 ioctl call. |
| CVE-2018-11412 | In the Linux kernel 4.13 through 4.16.11, ext4_read_inline_data() in fs/ext4/inline.c performs a memcpy with an untrusted length value in certain circumstances involving a crafted filesystem that stores the system.data extended attribute value in a dedicated inode. |
| CVE-2018-11304 | Possible buffer overflow in msm_adsp_stream_callback_put due to lack of input validation of user-provided data that leads to integer overflow in all Android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the Linux kernel. |
| CVE-2018-11302 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, lack of check of input received from userspace before copying into buffer can lead to potential array overflow in WLAN. |
| CVE-2018-11301 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, lack of check on buffer length while processing debug log event from firmware can lead to an integer overflow. |
| CVE-2018-11300 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, callback executed from the other thread has freed memory which is also used in wlan function and may result in to a "Use after free" scenario. |
| CVE-2018-1130 | Linux kernel before version 4.16-rc7 is vulnerable to a null pointer dereference in dccp_write_xmit() function in net/dccp/output.c in that allows a local user to cause a denial of service by a number of certain crafted system calls. |
| CVE-2018-11299 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, when WLAN FW has not filled the vdev id correctly in stats events then WLAN host driver tries to access interface array without proper bound check which can lead to invalid memory access and as a side effect kernel panic or page fault. |
| CVE-2018-11298 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while processing SET_PASSPOINT_LIST vendor command HDD does not make sure that the realm string that gets passed by upper-layer is NULL terminated. This may lead to buffer overflow as strlen is used to get realm string length to construct the PASSPOINT WMA command. |
| CVE-2018-11297 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, a buffer over-read can occur In the WMA NDP event handler functions due to lack of validation of input value event_info which is received from FW. |
| CVE-2018-11296 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while processing a message from firmware in WLAN handler, a buffer overwrite can occur. |
| CVE-2018-11295 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, WMA handler carries a fixed event data from the firmware to the host . If the length and anqp length from this event data exceeds the max length, an OOB write would happen. |
| CVE-2018-11294 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, WLAN handler indication from the firmware gets the information for 4 access categories. While processing this information only the first 3 AC information is copied due to the improper conditional logic used to compare with the max number of categories. |
| CVE-2018-11293 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, in wma_ndp_confirm_event_handler and wma_ndp_indication_event_handler, ndp_cfg len and num_ndp_app_info is from fw. If they are not checked, it may cause buffer over-read once the value is too large. |
| CVE-2018-11286 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while accessing global variable "debug_client" in multi-thread manner, Use after free issue occurs |
| CVE-2018-11281 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while calling IPA_IOC_MDFY_RT_RULE IPA IOCTL, header entry is not checked before use. If IPA_IOC_MDFY_RT_RULE IOCTL called for header entries formerly deleted, a Use after free condition will occur. |
| CVE-2018-11280 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while processing user-space there is no size validation of the NAT entry input. If the user input size of the NAT entry is greater than the max allowed size, memory exhaustion will occur. |
| CVE-2018-11278 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Venus HW searches for start code when decoding input bit stream buffers. If start code is not found in entire buffer, there is over-fetch beyond allocation length. This leads to page fault. |
| CVE-2018-11276 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, double free of memory allocation is possible in Kernel when it explicitly tries to free that memory on driver probe failure, since memory allocated is automatically freed on probe. |
| CVE-2018-11275 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, when flashing image using FastbootLib if size is not divisible by block size, information leak occurs. |
| CVE-2018-11274 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, buffer overflow may occur when payload size is extremely large. |
| CVE-2018-11273 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, 'voice_svc_dev' is allocated as a device-managed resource. If error 'cdev_alloc_err' occurs, 'device_destroy' will free all associated resources, including 'voice_svc_dev' leading to a double free. |
| CVE-2018-11270 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, memory allocated with devm_kzalloc is automatically released by the kernel if the probe function fails with an error code. This may result in data corruption. |
| CVE-2018-11266 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper input validation can lead to an improper access to already freed up dci client entries while closing dci client. |
| CVE-2018-11265 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, possible buffer overflow while incrementing the log_buf of type uint64_t in memcpy function, since the log_buf pointer can access the memory beyond the size to store the data after pointer increment. |
| CVE-2018-11263 | In all Android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the Linux kernel, radio_id is received from the FW and is used to access the buffer to copy the radio stats received for each radio from FW. If the radio_id received from the FW is greater than or equal to maximum, an OOB write will occur. On supported Google Pixel and Nexus devices, this has been addressed in security patch level 2018-08-05. |
| CVE-2018-11262 | In Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel while trying to find out total number of partition via a non zero check, there could be possibility where the 'TotalPart' could cross 'GptHeader->MaxPtCnt' and which could result in OOB write in patching GPT. |
| CVE-2018-11261 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, there is a possible Use-after-free issue in Media Codec process. Any application using codec service will be affected. |
| CVE-2018-11260 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while processing a fast Initial link setup (FILS) connection request, integer overflow may lead to a buffer overflow when the key length is zero. |
| CVE-2018-11232 | The etm_setup_aux function in drivers/hwtracing/coresight/coresight-etm-perf.c in the Linux kernel before 4.10.2 allows attackers to cause a denial of service (panic) because a parameter is incorrectly used as a local variable. |
| CVE-2018-1120 | A flaw was found affecting the Linux kernel before version 4.17. By mmap()ing a FUSE-backed file onto a process's memory containing command line arguments (or environment strings), an attacker can cause utilities from psutils or procps (such as ps, w) or any other program which makes a read() call to the /proc/<pid>/cmdline (or /proc/<pid>/environ) files to block indefinitely (denial of service) or for some controlled time (as a synchronization primitive for other attacks). |
| CVE-2018-1118 | Linux kernel vhost since version 4.8 does not properly initialize memory in messages passed between virtual guests and the host operating system in the vhost/vhost.c:vhost_new_msg() function. This can allow local privileged users to read some kernel memory contents when reading from the /dev/vhost-net device file. |
| CVE-2018-1108 | kernel drivers before version 4.17-rc1 are vulnerable to a weakness in the Linux kernel's implementation of random seed data. Programs, early in the boot sequence, could use the data allocated for the seed before it was sufficiently generated. |
| CVE-2018-1095 | The ext4_xattr_check_entries function in fs/ext4/xattr.c in the Linux kernel through 4.15.15 does not properly validate xattr sizes, which causes misinterpretation of a size as an error code, and consequently allows attackers to cause a denial of service (get_acl NULL pointer dereference and system crash) via a crafted ext4 image. |
| CVE-2018-10940 | The cdrom_ioctl_media_changed function in drivers/cdrom/cdrom.c in the Linux kernel before 4.16.6 allows local attackers to use a incorrect bounds check in the CDROM driver CDROM_MEDIA_CHANGED ioctl to read out kernel memory. |
| CVE-2018-1094 | The ext4_fill_super function in fs/ext4/super.c in the Linux kernel through 4.15.15 does not always initialize the crc32c checksum driver, which allows attackers to cause a denial of service (ext4_xattr_inode_hash NULL pointer dereference and system crash) via a crafted ext4 image. |
| CVE-2018-10938 | A flaw was found in the Linux kernel present since v4.0-rc1 and through v4.13-rc4. A crafted network packet sent remotely by an attacker may force the kernel to enter an infinite loop in the cipso_v4_optptr() function in net/ipv4/cipso_ipv4.c leading to a denial-of-service. A certain non-default configuration of LSM (Linux Security Module) and NetLabel should be set up on a system before an attacker could leverage this flaw. |
| CVE-2018-1093 | The ext4_valid_block_bitmap function in fs/ext4/balloc.c in the Linux kernel through 4.15.15 allows attackers to cause a denial of service (out-of-bounds read and system crash) via a crafted ext4 image because balloc.c and ialloc.c do not validate bitmap block numbers. |
| CVE-2018-1092 | The ext4_iget function in fs/ext4/inode.c in the Linux kernel through 4.15.15 mishandles the case of a root directory with a zero i_links_count, which allows attackers to cause a denial of service (ext4_process_freed_data NULL pointer dereference and OOPS) via a crafted ext4 image. |
| CVE-2018-1091 | In the flush_tmregs_to_thread function in arch/powerpc/kernel/ptrace.c in the Linux kernel before 4.13.5, a guest kernel crash can be triggered from unprivileged userspace during a core dump on a POWER host due to a missing processor feature check and an erroneous use of transactional memory (TM) instructions in the core dump path, leading to a denial of service. |
| CVE-2018-10902 | It was found that the raw midi kernel driver does not protect against concurrent access which leads to a double realloc (double free) in snd_rawmidi_input_params() and snd_rawmidi_output_status() which are part of snd_rawmidi_ioctl() handler in rawmidi.c file. A malicious local attacker could possibly use this for privilege escalation. |
| CVE-2018-10901 | A flaw was found in Linux kernel's KVM virtualization subsystem. The VMX code does not restore the GDT.LIMIT to the previous host value, but instead sets it to 64KB. With a corrupted GDT limit a host's userspace code has an ability to place malicious entries in the GDT, particularly to the per-cpu variables. An attacker can use this to escalate their privileges. |
| CVE-2018-10883 | A flaw was found in the Linux kernel's ext4 filesystem. A local user can cause an out-of-bounds write in jbd2_journal_dirty_metadata(), a denial of service, and a system crash by mounting and operating on a crafted ext4 filesystem image. |
| CVE-2018-10882 | A flaw was found in the Linux kernel's ext4 filesystem. A local user can cause an out-of-bound write in in fs/jbd2/transaction.c code, a denial of service, and a system crash by unmounting a crafted ext4 filesystem image. |
| CVE-2018-10881 | A flaw was found in the Linux kernel's ext4 filesystem. A local user can cause an out-of-bound access in ext4_get_group_info function, a denial of service, and a system crash by mounting and operating on a crafted ext4 filesystem image. |
| CVE-2018-10880 | Linux kernel is vulnerable to a stack-out-of-bounds write in the ext4 filesystem code when mounting and writing to a crafted ext4 image in ext4_update_inline_data(). An attacker could use this to cause a system crash and a denial of service. |
| CVE-2018-10879 | A flaw was found in the Linux kernel's ext4 filesystem. A local user can cause a use-after-free in ext4_xattr_set_entry function and a denial of service or unspecified other impact may occur by renaming a file in a crafted ext4 filesystem image. |
| CVE-2018-10878 | A flaw was found in the Linux kernel's ext4 filesystem. A local user can cause an out-of-bounds write and a denial of service or unspecified other impact is possible by mounting and operating a crafted ext4 filesystem image. |
| CVE-2018-10877 | Linux kernel ext4 filesystem is vulnerable to an out-of-bound access in the ext4_ext_drop_refs() function when operating on a crafted ext4 filesystem image. |
| CVE-2018-10876 | A flaw was found in Linux kernel in the ext4 filesystem code. A use-after-free is possible in ext4_ext_remove_space() function when mounting and operating a crafted ext4 image. |
| CVE-2018-10872 | A flaw was found in the way the Linux kernel handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, processor does not deliver interrupts and exceptions, they are delivered once the first instruction after the stack switch is executed. An unprivileged system user could use this flaw to crash the system kernel resulting in DoS. This CVE-2018-10872 was assigned due to regression of CVE-2018-8897 in Red Hat Enterprise Linux 6.10 GA kernel. No other versions are affected by this CVE. |
| CVE-2018-1087 | kernel KVM before versions kernel 4.16, kernel 4.16-rc7, kernel 4.17-rc1, kernel 4.17-rc2 and kernel 4.17-rc3 is vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest. |
| CVE-2018-10853 | A flaw was found in the way Linux kernel KVM hypervisor before 4.18 emulated instructions such as sgdt/sidt/fxsave/fxrstor. It did not check current privilege(CPL) level while emulating unprivileged instructions. An unprivileged guest user/process could use this flaw to potentially escalate privileges inside guest. |
| CVE-2018-10840 | Linux kernel is vulnerable to a heap-based buffer overflow in the fs/ext4/xattr.c:ext4_xattr_set_entry() function. An attacker could exploit this by operating on a mounted crafted ext4 image. |
| CVE-2018-10689 | blktrace (aka Block IO Tracing) 1.2.0, as used with the Linux kernel and Android, has a buffer overflow in the dev_map_read function in btt/devmap.c because the device and devno arrays are too small, as demonstrated by an invalid free when using the btt program with a crafted file. |
| CVE-2018-1068 | A flaw was found in the Linux 4.x kernel's implementation of 32-bit syscall interface for bridging. This allowed a privileged user to arbitrarily write to a limited range of kernel memory. |
| CVE-2018-10675 | The do_get_mempolicy function in mm/mempolicy.c in the Linux kernel before 4.12.9 allows local users to cause a denial of service (use-after-free) or possibly have unspecified other impact via crafted system calls. |
| CVE-2018-1066 | The Linux kernel before version 4.11 is vulnerable to a NULL pointer dereference in fs/cifs/cifsencrypt.c:setup_ntlmv2_rsp() that allows an attacker controlling a CIFS server to kernel panic a client that has this server mounted, because an empty TargetInfo field in an NTLMSSP setup negotiation response is mishandled during session recovery. |
| CVE-2018-1065 | The netfilter subsystem in the Linux kernel through 4.15.7 mishandles the case of a rule blob that contains a jump but lacks a user-defined chain, which allows local users to cause a denial of service (NULL pointer dereference) by leveraging the CAP_NET_RAW or CAP_NET_ADMIN capability, related to arpt_do_table in net/ipv4/netfilter/arp_tables.c, ipt_do_table in net/ipv4/netfilter/ip_tables.c, and ip6t_do_table in net/ipv6/netfilter/ip6_tables.c. |
| CVE-2018-10323 | The xfs_bmap_extents_to_btree function in fs/xfs/libxfs/xfs_bmap.c in the Linux kernel through 4.16.3 allows local users to cause a denial of service (xfs_bmapi_write NULL pointer dereference) via a crafted xfs image. |
| CVE-2018-10322 | The xfs_dinode_verify function in fs/xfs/libxfs/xfs_inode_buf.c in the Linux kernel through 4.16.3 allows local users to cause a denial of service (xfs_ilock_attr_map_shared invalid pointer dereference) via a crafted xfs image. |
| CVE-2018-10124 | The kill_something_info function in kernel/signal.c in the Linux kernel before 4.13, when an unspecified architecture and compiler is used, might allow local users to cause a denial of service via an INT_MIN argument. |
| CVE-2018-10087 | The kernel_wait4 function in kernel/exit.c in the Linux kernel before 4.13, when an unspecified architecture and compiler is used, might allow local users to cause a denial of service by triggering an attempted use of the -INT_MIN value. |
| CVE-2018-10074 | The hi3660_stub_clk_probe function in drivers/clk/hisilicon/clk-hi3660-stub.c in the Linux kernel before 4.16 allows local users to cause a denial of service (NULL pointer dereference) by triggering a failure of resource retrieval. |
| CVE-2018-10021 | ** DISPUTED ** drivers/scsi/libsas/sas_scsi_host.c in the Linux kernel before 4.16 allows local users to cause a denial of service (ata qc leak) by triggering certain failure conditions. NOTE: a third party disputes the relevance of this report because the failure can only occur for physically proximate attackers who unplug SAS Host Bus Adapter cables. |
| CVE-2018-1000204 | ** DISPUTED ** Linux Kernel version 3.18 to 4.16 incorrectly handles an SG_IO ioctl on /dev/sg0 with dxfer_direction=SG_DXFER_FROM_DEV and an empty 6-byte cmdp. This may lead to copying up to 1000 kernel heap pages to the userspace. This has been fixed upstream in https://github.com/torvalds/linux/commit/a45b599ad808c3c982fdcdc12b0b8611c2f92824 already. The problem has limited scope, as users don't usually have permissions to access SCSI devices. On the other hand, e.g. the Nero user manual suggests doing `chmod o+r+w /dev/sg*` to make the devices accessible. NOTE: third parties dispute the relevance of this report, noting that the requirement for an attacker to have both the CAP_SYS_ADMIN and CAP_SYS_RAWIO capabilities makes it "virtually impossible to exploit." |
| CVE-2018-1000200 | The Linux Kernel versions 4.14, 4.15, and 4.16 has a null pointer dereference which can result in an out of memory (OOM) killing of large mlocked processes. The issue arises from an oom killed process's final thread calling exit_mmap(), which calls munlock_vma_pages_all() for mlocked vmas.This can happen synchronously with the oom reaper's unmap_page_range() since the vma's VM_LOCKED bit is cleared before munlocking (to determine if any other vmas share the memory and are mlocked). |
| CVE-2018-1000199 | The Linux Kernel version 3.18 contains a dangerous feature vulnerability in modify_user_hw_breakpoint() that can result in crash and possibly memory corruption. This attack appear to be exploitable via local code execution and the ability to use ptrace. This vulnerability appears to have been fixed in git commit f67b15037a7a50c57f72e69a6d59941ad90a0f0f. |
| CVE-2018-1000028 | Linux kernel version after commit bdcf0a423ea1 - 4.15-rc4+, 4.14.8+, 4.9.76+, 4.4.111+ contains a Incorrect Access Control vulnerability in NFS server (nfsd) that can result in remote users reading or writing files they should not be able to via NFS. This attack appear to be exploitable via NFS server must export a filesystem with the "rootsquash" options enabled. This vulnerability appears to have been fixed in after commit 1995266727fa. |
| CVE-2018-1000026 | Linux Linux kernel version at least v4.8 onwards, probably well before contains a Insufficient input validation vulnerability in bnx2x network card driver that can result in DoS: Network card firmware assertion takes card off-line. This attack appear to be exploitable via An attacker on a must pass a very large, specially crafted packet to the bnx2x card. This can be done from an untrusted guest VM.. |
| CVE-2018-1000004 | In the Linux kernel 4.12, 3.10, 2.6 and possibly earlier versions a race condition vulnerability exists in the sound system, this can lead to a deadlock and denial of service condition. |
| CVE-2017-9986 | The intr function in sound/oss/msnd_pinnacle.c in the Linux kernel through 4.11.7 allows local users to cause a denial of service (over-boundary access) or possibly have unspecified other impact by changing the value of a message queue head pointer between two kernel reads of that value, aka a "double fetch" vulnerability. |
| CVE-2017-9985 | The snd_msndmidi_input_read function in sound/isa/msnd/msnd_midi.c in the Linux kernel through 4.11.7 allows local users to cause a denial of service (over-boundary access) or possibly have unspecified other impact by changing the value of a message queue head pointer between two kernel reads of that value, aka a "double fetch" vulnerability. |
| CVE-2017-9984 | The snd_msnd_interrupt function in sound/isa/msnd/msnd_pinnacle.c in the Linux kernel through 4.11.7 allows local users to cause a denial of service (over-boundary access) or possibly have unspecified other impact by changing the value of a message queue head pointer between two kernel reads of that value, aka a "double fetch" vulnerability. |
| CVE-2017-9725 | In all Qualcomm products with Android releases from CAF using the Linux kernel, during DMA allocation, due to wrong data type of size, allocation size gets truncated which makes allocation succeed when it should fail. |
| CVE-2017-9724 | In all Qualcomm products with Android releases from CAF using the Linux kernel, user-level permissions can be used to gain access to kernel memory, specifically the ION cache maintenance code is writing to a user supplied address. |
| CVE-2017-9722 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, when updating custom EDID (hdmi_tx_sysfs_wta_edid), if edid_size, which is controlled by userspace, is too large, a buffer overflow occurs. |
| CVE-2017-9721 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the boot loader, a buffer overflow can occur while parsing the splash image. |
| CVE-2017-9720 | In all Qualcomm products with Android releases from CAF using the Linux kernel, due to an off-by-one error in a camera driver, an out-of-bounds read/write can occur. |
| CVE-2017-9719 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the kernel driver MDSS, a buffer overflow can occur in HDMI CEC parsing if frame size is out of range. |
| CVE-2017-9718 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a race condition in a multimedia driver can potentially lead to a buffer overwrite. |
| CVE-2017-9717 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while parsing Netlink attributes, a buffer overread can occur. |
| CVE-2017-9716 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, the qbt1000 driver implements an alternative channel for usermode applications to talk to QSEE applications. |
| CVE-2017-9715 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing a vendor command, a buffer over-read can occur. |
| CVE-2017-9714 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, an out of bound memory access may happen in limCheckRxRSNIeMatch in case incorrect RSNIE is received from the client in assoc request. |
| CVE-2017-9712 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, if userspace provides a too-large IE length in wlan_hdd_cfg80211_set_ie, a buffer over-read occurs. |
| CVE-2017-9710 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, IOCTL interface to send QMI NOTIFY REQ messages can be called from multiple contexts which can result in buffer overflow of msg cache. |
| CVE-2017-9709 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a privilege escalation vulnerability exists in telephony. |
| CVE-2017-9708 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the camera driver, the function "msm_ois_power_down" is called without a mutex and a race condition can occur in variable "*reg_ptr" of sub function "msm_camera_config_single_vreg". |
| CVE-2017-9706 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, an array out-of-bounds access can potentially occur in a display driver. |
| CVE-2017-9705 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, concurrent rx notifications and read() operations in the G-Link PKT driver can result in a double free condition due to missing locking resulting in list_del() and list_add() overlapping and corrupting the next and previous pointers. |
| CVE-2017-9704 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, There is no synchronization between msm_vb2 buffer operations which can lead to use after free. |
| CVE-2017-9703 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a race condition in a Camera driver can lead to a Use After Free condition. |
| CVE-2017-9702 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a user-space pointer is directly accessed in a camera driver. |
| CVE-2017-9701 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing OEM unlock/unlock-go fastboot commands data leak may occur, resulting from writing uninitialized stack structure to non-volatile memory. |
| CVE-2017-9700 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, buffer overwrite is possible in fw_name_store if image name is 64 characters. |
| CVE-2017-9698 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improperly specified offset/size values for a submission command could cause a math operation to overflow and could result in an access to arbitrary memory. The combined pointer will overflow and possibly pass further checks intended to avoid accessing unintended memory. |
| CVE-2017-9697 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a race condition can allow access to already freed memory while reading command registration table entries in diag_dbgfs_read_table. |
| CVE-2017-9696 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, buffer over-read is possible in camera driver function msm_isp_stop_stats_stream. Variable stream_cfg_cmd->num_streams is from userspace, and it is not checked against "MSM_ISP_STATS_MAX". |
| CVE-2017-9690 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in a qbt1000 ioctl handler, an incorrect buffer size check has an integer overflow vulnerability potentially leading to a buffer overflow. |
| CVE-2017-9689 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a specially-crafted HDMI CEC message can be used to cause stack memory corruption. |
| CVE-2017-9687 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, two concurrent threads/processes can write the value of "0" to the debugfs file that controls ipa ipc log which will lead to the double-free in ipc_log_context_destroy(). Another issue is the Use-After-Free which can happen due to the race condition when the ipc log is deallocated via the debugfs call during a log print. |
| CVE-2017-9686 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, there is a possible double free/use after free in the SPS driver when debugfs logging is used. |
| CVE-2017-9685 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a race condition in a WLAN driver can lead to a Use After Free condition. |
| CVE-2017-9684 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a race condition in a USB driver can lead to a Use After Free condition. |
| CVE-2017-9683 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while flashing a meta image, an integer overflow can occur, if user-defined image offset and size values are too large. |
| CVE-2017-9682 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a race condition in two KGSL driver functions can lead to a Use After Free condition. |
| CVE-2017-9681 | In Android before 2017-08-05 on Qualcomm MSM, Firefox OS for MSM, QRD Android, and all Android releases from CAF using the Linux kernel, if kernel memory address is passed from userspace through iris_vidioc_s_ext_ctrls ioctl, it will print kernel address data. A user could set it to an arbitrary kernel address, hence information disclosure (for kernel) could occur. |
| CVE-2017-9680 | In all Qualcomm products with Android releases from CAF using the Linux kernel, if a pointer argument coming from userspace is invalid, a driver may use an uninitialized structure to log an error message. |
| CVE-2017-9679 | In all Qualcomm products with Android releases from CAF using the Linux kernel, if a userspace string is not NULL-terminated, kernel memory contents can leak to system logs. |
| CVE-2017-9678 | In all Qualcomm products with Android releases from CAF using the Linux kernel, in a video driver, memory corruption can potentially occur due to lack of bounds checking in a memcpy(). |
| CVE-2017-9677 | In all Qualcomm products with Android releases from CAF using the Linux kernel, in function msm_compr_ioctl_shared, variable "ddp->params_length" could be accessed and modified by multiple threads, while it is not protected with locks. If one thread is running, while another thread is setting data, race conditions will happen. If "ddp->params_length" is set to a big number, a buffer overflow will occur. |
| CVE-2017-9676 | In all Qualcomm products with Android releases from CAF using the Linux kernel, potential use after free scenarios and race conditions can occur when accessing global static variables without using a lock. |
| CVE-2017-9605 | The vmw_gb_surface_define_ioctl function (accessible via DRM_IOCTL_VMW_GB_SURFACE_CREATE) in drivers/gpu/drm/vmwgfx/vmwgfx_surface.c in the Linux kernel through 4.11.4 defines a backup_handle variable but does not give it an initial value. If one attempts to create a GB surface, with a previously allocated DMA buffer to be used as a backup buffer, the backup_handle variable does not get written to and is then later returned to user space, allowing local users to obtain sensitive information from uninitialized kernel memory via a crafted ioctl call. |
| CVE-2017-9242 | The __ip6_append_data function in net/ipv6/ip6_output.c in the Linux kernel through 4.11.3 is too late in checking whether an overwrite of an skb data structure may occur, which allows local users to cause a denial of service (system crash) via crafted system calls. |
| CVE-2017-9211 | The crypto_skcipher_init_tfm function in crypto/skcipher.c in the Linux kernel through 4.11.2 relies on a setkey function that lacks a key-size check, which allows local users to cause a denial of service (NULL pointer dereference) via a crafted application. |
| CVE-2017-9150 | The do_check function in kernel/bpf/verifier.c in the Linux kernel before 4.11.1 does not make the allow_ptr_leaks value available for restricting the output of the print_bpf_insn function, which allows local users to obtain sensitive address information via crafted bpf system calls. |
| CVE-2017-9077 | The tcp_v6_syn_recv_sock function in net/ipv6/tcp_ipv6.c in the Linux kernel through 4.11.1 mishandles inheritance, which allows local users to cause a denial of service or possibly have unspecified other impact via crafted system calls, a related issue to CVE-2017-8890. |
| CVE-2017-9076 | The dccp_v6_request_recv_sock function in net/dccp/ipv6.c in the Linux kernel through 4.11.1 mishandles inheritance, which allows local users to cause a denial of service or possibly have unspecified other impact via crafted system calls, a related issue to CVE-2017-8890. |
| CVE-2017-9075 | The sctp_v6_create_accept_sk function in net/sctp/ipv6.c in the Linux kernel through 4.11.1 mishandles inheritance, which allows local users to cause a denial of service or possibly have unspecified other impact via crafted system calls, a related issue to CVE-2017-8890. |
| CVE-2017-9074 | The IPv6 fragmentation implementation in the Linux kernel through 4.11.1 does not consider that the nexthdr field may be associated with an invalid option, which allows local users to cause a denial of service (out-of-bounds read and BUG) or possibly have unspecified other impact via crafted socket and send system calls. |
| CVE-2017-9059 | The NFSv4 implementation in the Linux kernel through 4.11.1 allows local users to cause a denial of service (resource consumption) by leveraging improper channel callback shutdown when unmounting an NFSv4 filesystem, aka a "module reference and kernel daemon" leak. |
| CVE-2017-8925 | The omninet_open function in drivers/usb/serial/omninet.c in the Linux kernel before 4.10.4 allows local users to cause a denial of service (tty exhaustion) by leveraging reference count mishandling. |
| CVE-2017-8924 | The edge_bulk_in_callback function in drivers/usb/serial/io_ti.c in the Linux kernel before 4.10.4 allows local users to obtain sensitive information (in the dmesg ringbuffer and syslog) from uninitialized kernel memory by using a crafted USB device (posing as an io_ti USB serial device) to trigger an integer underflow. |
| CVE-2017-8890 | The inet_csk_clone_lock function in net/ipv4/inet_connection_sock.c in the Linux kernel through 4.10.15 allows attackers to cause a denial of service (double free) or possibly have unspecified other impact by leveraging use of the accept system call. |
| CVE-2017-8831 | The saa7164_bus_get function in drivers/media/pci/saa7164/saa7164-bus.c in the Linux kernel through 4.11.5 allows local users to cause a denial of service (out-of-bounds array access) or possibly have unspecified other impact by changing a certain sequence-number value, aka a "double fetch" vulnerability. |
| CVE-2017-8824 | The dccp_disconnect function in net/dccp/proto.c in the Linux kernel through 4.14.3 allows local users to gain privileges or cause a denial of service (use-after-free) via an AF_UNSPEC connect system call during the DCCP_LISTEN state. |
| CVE-2017-8797 | The NFSv4 server in the Linux kernel before 4.11.3 does not properly validate the layout type when processing the NFSv4 pNFS GETDEVICEINFO or LAYOUTGET operand in a UDP packet from a remote attacker. This type value is uninitialized upon encountering certain error conditions. This value is used as an array index for dereferencing, which leads to an OOPS and eventually a DoS of knfsd and a soft-lockup of the whole system. |
| CVE-2017-8281 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a race condition can allow access to already freed memory while querying event status via DCI. |
| CVE-2017-8280 | In all Qualcomm products with Android releases from CAF using the Linux kernel, during the wlan calibration data store and retrieve operation, there are some potential race conditions which lead to a memory leak and a buffer overflow during the context switch. |
| CVE-2017-8279 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, missing race condition protection while updating msg mask table can lead to buffer over-read. Also access to freed memory can happen while updating msg_mask information. |
| CVE-2017-8278 | In all Qualcomm products with Android releases from CAF using the Linux kernel, while reading audio data from an unspecified driver, a buffer overflow or integer overflow could occur. |
| CVE-2017-8277 | In all Qualcomm products with Android releases from CAF using the Linux kernel, in the function msm_dba_register_client, if the client registers failed, it would be freed. However the client was not removed from list. Use-after-free would occur when traversing the list next time. |
| CVE-2017-8273 | In all Qualcomm products with Android release from CAF using the Linux kernel, while processing fastboot boot command when verified boot feature is disabled, with length greater than boot image buffer, a buffer overflow can occur. |
| CVE-2017-8272 | In all Qualcomm products with Android releases from CAF using the Linux kernel, in a driver function, a value from userspace is not properly validated potentially leading to an out of bounds heap write. |
| CVE-2017-8271 | Out of bound memory write can happen in the MDSS Rotator driver in all Qualcomm products with Android releases from CAF using the Linux kernel by an unsanitized userspace-controlled parameter. |
| CVE-2017-8270 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a race condition exists in a driver potentially leading to a use-after-free condition. |
| CVE-2017-8269 | Userspace-controlled non null terminated parameter for IPA WAN ioctl in all Qualcomm products with Android releases from CAF using the Linux kernel can lead to exposure of kernel memory. |
| CVE-2017-8268 | In all Qualcomm products with Android releases from CAF using the Linux kernel, the camera application can possibly request frame/command buffer processing with invalid values leading to the driver performing a heap buffer over-read. |
| CVE-2017-8267 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a race condition exists in an IOCTL handler potentially leading to an integer overflow and then an out-of-bounds write. |
| CVE-2017-8266 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a race condition exists in a video driver potentially leading to a use-after-free condition. |
| CVE-2017-8265 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a race condition exists in a video driver which can lead to a double free. |
| CVE-2017-8264 | A userspace process can cause a Denial of Service in the camera driver in all Qualcomm products with Android releases from CAF using the Linux kernel. |
| CVE-2017-8263 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a kernel fault can occur when doing certain operations on a read-only virtual address in userspace. |
| CVE-2017-8262 | In all Qualcomm products with Android releases from CAF using the Linux kernel, in some memory allocation and free functions, a race condition can potentially occur leading to a Use After Free condition. |
| CVE-2017-8261 | In all Qualcomm products with Android releases from CAF using the Linux kernel, in a camera driver ioctl, a kernel overwrite can potentially occur. |
| CVE-2017-8260 | In all Qualcomm products with Android releases from CAF using the Linux kernel, due to a type downcast, a value may improperly pass validation and cause an out of bounds write later. |
| CVE-2017-8259 | In the service locator in all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer overflow can occur as the variable set for determining the size of the buffer is not used to indicate the size of the buffer. |
| CVE-2017-8258 | An array out-of-bounds access in all Qualcomm products with Android releases from CAF using the Linux kernel can potentially occur in a camera driver. |
| CVE-2017-8257 | In all Qualcomm products with Android releases from CAF using the Linux kernel, when accessing the sde_rotator debug interface for register reading with multiple processes, one process can free the debug buffer while another process still has the debug buffer in use. |
| CVE-2017-8256 | In all Qualcomm products with Android releases from CAF using the Linux kernel, array out of bounds access can occur if userspace sends more than 16 multicast addresses. |
| CVE-2017-8255 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an integer overflow vulnerability exists in boot. |
| CVE-2017-8254 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an audio client pointer is dereferenced before being checked if it is valid. |
| CVE-2017-8253 | In all Qualcomm products with Android releases from CAF using the Linux kernel, kernel memory can potentially be overwritten if an invalid master is sent from userspace. |
| CVE-2017-8251 | In all Qualcomm products with Android releases from CAF using the Linux kernel, in functions msm_isp_check_stream_cfg_cmd & msm_isp_stats_update_cgc_override, 'stream_cfg_cmd->num_streams' is not checked, and could overflow the array stream_cfg_cmd->stream_handle. |
| CVE-2017-8250 | In all Qualcomm products with Android releases from CAF using the Linux kernel, user controlled variables "nr_cmds" and "nr_bos" number are passed across functions without any check. An integer overflow to buffer overflow (with a smaller buffer allocated) may occur when they are too large or negative. |
| CVE-2017-8247 | In all Qualcomm products with Android releases from CAF using the Linux kernel, if there is more than one thread doing the device open operation, the device may be opened more than once. This would lead to get_pid being called more than once, however put_pid being called only once in function "msm_close". |
| CVE-2017-8246 | In function msm_pcm_playback_close() in all Android releases from CAF using the Linux kernel, prtd is assigned substream->runtime->private_data. Later, prtd is freed. However, prtd is not sanitized and set to NULL, resulting in a dangling pointer. There are other functions that access the same memory (substream->runtime->private_data) with a NULL check, such as msm_pcm_volume_ctl_put(), which means this freed memory could be used. |
| CVE-2017-8245 | In all Android releases from CAF using the Linux kernel, while processing a voice SVC request which is nonstandard by specifying a payload size that will overflow its own declared size, an out of bounds memory copy occurs. |
| CVE-2017-8244 | In core_info_read and inst_info_read in all Android releases from CAF using the Linux kernel, variable "dbg_buf", "dbg_buf->curr" and "dbg_buf->filled_size" could be modified by different threads at the same time, but they are not protected with mutex or locks. Buffer overflow is possible on race conditions. "buffer->curr" itself could also be overwritten, which means that it may point to anywhere of kernel memory (for write). |
| CVE-2017-8242 | In all Android releases from CAF using the Linux kernel, a race condition exists in a QTEE driver potentially leading to an arbitrary memory write. |
| CVE-2017-8241 | In all Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in a WLAN function due to an incorrect message length. |
| CVE-2017-8240 | In all Android releases from CAF using the Linux kernel, a kernel driver has an off-by-one buffer over-read vulnerability. |
| CVE-2017-8239 | In all Android releases from CAF using the Linux kernel, userspace-controlled parameters for flash initialization are not sanitized potentially leading to exposure of kernel memory. |
| CVE-2017-8238 | In all Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in a camera function. |
| CVE-2017-8237 | In all Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists while loading a firmware image. |
| CVE-2017-8236 | In all Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in an IPA driver. |
| CVE-2017-8235 | In all Android releases from CAF using the Linux kernel, a memory structure in a camera driver is not properly protected. |
| CVE-2017-8234 | In all Android releases from CAF using the Linux kernel, an out of bounds access can potentially occur in a camera function. |
| CVE-2017-8233 | In a camera driver function in all Android releases from CAF using the Linux kernel, a bounds check is missing when writing into an array potentially leading to an out-of-bounds heap write. |
| CVE-2017-8106 | The handle_invept function in arch/x86/kvm/vmx.c in the Linux kernel 3.12 through 3.15 allows privileged KVM guest OS users to cause a denial of service (NULL pointer dereference and host OS crash) via a single-context INVEPT instruction with a NULL EPT pointer. |
| CVE-2017-8072 | The cp2112_gpio_direction_input function in drivers/hid/hid-cp2112.c in the Linux kernel 4.9.x before 4.9.9 does not have the expected EIO error status for a zero-length report, which allows local users to have an unspecified impact via unknown vectors. |
| CVE-2017-8071 | drivers/hid/hid-cp2112.c in the Linux kernel 4.9.x before 4.9.9 uses a spinlock without considering that sleeping is possible in a USB HID request callback, which allows local users to cause a denial of service (deadlock) via unspecified vectors. |
| CVE-2017-8070 | drivers/net/usb/catc.c in the Linux kernel 4.9.x before 4.9.11 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist. |
| CVE-2017-8069 | drivers/net/usb/rtl8150.c in the Linux kernel 4.9.x before 4.9.11 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist. |
| CVE-2017-8068 | drivers/net/usb/pegasus.c in the Linux kernel 4.9.x before 4.9.11 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist. |
| CVE-2017-8067 | drivers/char/virtio_console.c in the Linux kernel 4.9.x and 4.10.x before 4.10.12 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist. |
| CVE-2017-8066 | drivers/net/can/usb/gs_usb.c in the Linux kernel 4.9.x and 4.10.x before 4.10.2 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist. |
| CVE-2017-8065 | crypto/ccm.c in the Linux kernel 4.9.x and 4.10.x through 4.10.12 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist. |
| CVE-2017-8064 | drivers/media/usb/dvb-usb-v2/dvb_usb_core.c in the Linux kernel 4.9.x and 4.10.x before 4.10.12 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist. |
| CVE-2017-8063 | drivers/media/usb/dvb-usb/cxusb.c in the Linux kernel 4.9.x and 4.10.x before 4.10.12 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist. |
| CVE-2017-8062 | drivers/media/usb/dvb-usb/dw2102.c in the Linux kernel 4.9.x and 4.10.x before 4.10.4 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist. |
| CVE-2017-8061 | drivers/media/usb/dvb-usb/dvb-usb-firmware.c in the Linux kernel 4.9.x and 4.10.x before 4.10.7 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist. |
| CVE-2017-7979 | The cookie feature in the packet action API implementation in net/sched/act_api.c in the Linux kernel 4.11.x through 4.11-rc7 mishandles the tb nlattr array, which allows local users to cause a denial of service (uninitialized memory access and refcount underflow, and system hang or crash) or possibly have unspecified other impact via "tc filter add" commands in certain contexts. NOTE: this does not affect stable kernels, such as 4.10.x, from kernel.org. |
| CVE-2017-7895 | The NFSv2 and NFSv3 server implementations in the Linux kernel through 4.10.13 lack certain checks for the end of a buffer, which allows remote attackers to trigger pointer-arithmetic errors or possibly have unspecified other impact via crafted requests, related to fs/nfsd/nfs3xdr.c and fs/nfsd/nfsxdr.c. |
| CVE-2017-7889 | The mm subsystem in the Linux kernel through 3.2 does not properly enforce the CONFIG_STRICT_DEVMEM protection mechanism, which allows local users to read or write to kernel memory locations in the first megabyte (and bypass slab-allocation access restrictions) via an application that opens the /dev/mem file, related to arch/x86/mm/init.c and drivers/char/mem.c. |
| CVE-2017-7645 | The NFSv2/NFSv3 server in the nfsd subsystem in the Linux kernel through 4.10.11 allows remote attackers to cause a denial of service (system crash) via a long RPC reply, related to net/sunrpc/svc.c, fs/nfsd/nfs3xdr.c, and fs/nfsd/nfsxdr.c. |
| CVE-2017-7618 | crypto/ahash.c in the Linux kernel through 4.10.9 allows attackers to cause a denial of service (API operation calling its own callback, and infinite recursion) by triggering EBUSY on a full queue. |
| CVE-2017-7616 | Incorrect error handling in the set_mempolicy and mbind compat syscalls in mm/mempolicy.c in the Linux kernel through 4.10.9 allows local users to obtain sensitive information from uninitialized stack data by triggering failure of a certain bitmap operation. |
| CVE-2017-7558 | A kernel data leak due to an out-of-bound read was found in the Linux kernel in inet_diag_msg_sctp{,l}addr_fill() and sctp_get_sctp_info() functions present since version 4.7-rc1 through version 4.13. A data leak happens when these functions fill in sockaddr data structures used to export socket's diagnostic information. As a result, up to 100 bytes of the slab data could be leaked to a userspace. |
| CVE-2017-7542 | The ip6_find_1stfragopt function in net/ipv6/output_core.c in the Linux kernel through 4.12.3 allows local users to cause a denial of service (integer overflow and infinite loop) by leveraging the ability to open a raw socket. |
| CVE-2017-7541 | The brcmf_cfg80211_mgmt_tx function in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c in the Linux kernel before 4.12.3 allows local users to cause a denial of service (buffer overflow and system crash) or possibly gain privileges via a crafted NL80211_CMD_FRAME Netlink packet. |
| CVE-2017-7533 | Race condition in the fsnotify implementation in the Linux kernel through 4.12.4 allows local users to gain privileges or cause a denial of service (memory corruption) via a crafted application that leverages simultaneous execution of the inotify_handle_event and vfs_rename functions. |
| CVE-2017-7518 | A flaw was found in the Linux kernel before version 4.12 in the way the KVM module processed the trap flag(TF) bit in EFLAGS during emulation of the syscall instruction, which leads to a debug exception(#DB) being raised in the guest stack. A user/process inside a guest could use this flaw to potentially escalate their privileges inside the guest. Linux guests are not affected by this. |
| CVE-2017-7495 | fs/ext4/inode.c in the Linux kernel before 4.6.2, when ext4 data=ordered mode is used, mishandles a needs-flushing-before-commit list, which allows local users to obtain sensitive information from other users' files in opportunistic circumstances by waiting for a hardware reset, creating a new file, making write system calls, and reading this file. |
| CVE-2017-7487 | The ipxitf_ioctl function in net/ipx/af_ipx.c in the Linux kernel through 4.11.1 mishandles reference counts, which allows local users to cause a denial of service (use-after-free) or possibly have unspecified other impact via a failed SIOCGIFADDR ioctl call for an IPX interface. |
| CVE-2017-7482 | In the Linux kernel before version 4.12, Kerberos 5 tickets decoded when using the RXRPC keys incorrectly assumes the size of a field. This could lead to the size-remaining variable wrapping and the data pointer going over the end of the buffer. This could possibly lead to memory corruption and possible privilege escalation. |
| CVE-2017-7477 | Heap-based buffer overflow in drivers/net/macsec.c in the MACsec module in the Linux kernel through 4.10.12 allows attackers to cause a denial of service or possibly have unspecified other impact by leveraging the use of a MAX_SKB_FRAGS+1 size in conjunction with the NETIF_F_FRAGLIST feature, leading to an error in the skb_to_sgvec function. |
| CVE-2017-7472 | The KEYS subsystem in the Linux kernel before 4.10.13 allows local users to cause a denial of service (memory consumption) via a series of KEY_REQKEY_DEFL_THREAD_KEYRING keyctl_set_reqkey_keyring calls. |
| CVE-2017-7374 | Use-after-free vulnerability in fs/crypto/ in the Linux kernel before 4.10.7 allows local users to cause a denial of service (NULL pointer dereference) or possibly gain privileges by revoking keyring keys being used for ext4, f2fs, or ubifs encryption, causing cryptographic transform objects to be freed prematurely. |
| CVE-2017-7373 | In all Android releases from CAF using the Linux kernel, a double free vulnerability exists in a display driver. |
| CVE-2017-7372 | In all Android releases from CAF using the Linux kernel, a race condition exists in a video driver potentially leading to buffer overflow or write to arbitrary pointer location. |
| CVE-2017-7371 | In all Android releases from CAF using the Linux kernel, a data pointer is potentially used after it has been freed when SLIMbus is turned off by Bluetooth. |
| CVE-2017-7370 | In all Android releases from CAF using the Linux kernel, a race condition exists in a video driver potentially leading to a use-after-free condition. |
| CVE-2017-7369 | In all Android releases from CAF using the Linux kernel, an array index in an ALSA routine is not properly validating potentially leading to kernel stack corruption. |
| CVE-2017-7368 | In all Android releases from CAF using the Linux kernel, a race condition potentially exists in the ioctl handler of a sound driver. |
| CVE-2017-7367 | In all Android releases from CAF using the Linux kernel, an integer underflow vulnerability exists while processing the boot image. |
| CVE-2017-7366 | In all Android releases from CAF using the Linux kernel, a KGSL ioctl was not validating all of its parameters. |
| CVE-2017-7365 | In all Android releases from CAF using the Linux kernel, a buffer overread can occur if a particular string is not NULL terminated. |
| CVE-2017-7364 | In all Qualcomm products with Android releases from CAF using the Linux kernel, in function __mdss_fb_copy_destscaler_data(), variable ds_data[i].scale may still point to a user-provided address (which could point to arbitrary kernel address), so on an error condition, this user-provided address will be freed (arbitrary free), and continued operation could result in use after free condition. |
| CVE-2017-7346 | The vmw_gb_surface_define_ioctl function in drivers/gpu/drm/vmwgfx/vmwgfx_surface.c in the Linux kernel through 4.10.7 does not validate certain levels data, which allows local users to cause a denial of service (system hang) via a crafted ioctl call for a /dev/dri/renderD* device. |
| CVE-2017-7308 | The packet_set_ring function in net/packet/af_packet.c in the Linux kernel through 4.10.6 does not properly validate certain block-size data, which allows local users to cause a denial of service (integer signedness error and out-of-bounds write), or gain privileges (if the CAP_NET_RAW capability is held), via crafted system calls. |
| CVE-2017-7294 | The vmw_surface_define_ioctl function in drivers/gpu/drm/vmwgfx/vmwgfx_surface.c in the Linux kernel through 4.10.6 does not validate addition of certain levels data, which allows local users to trigger an integer overflow and out-of-bounds write, and cause a denial of service (system hang or crash) or possibly gain privileges, via a crafted ioctl call for a /dev/dri/renderD* device. |
| CVE-2017-7277 | The TCP stack in the Linux kernel through 4.10.6 mishandles the SCM_TIMESTAMPING_OPT_STATS feature, which allows local users to obtain sensitive information from the kernel's internal socket data structures or cause a denial of service (out-of-bounds read) via crafted system calls, related to net/core/skbuff.c and net/socket.c. |
| CVE-2017-7273 | The cp_report_fixup function in drivers/hid/hid-cypress.c in the Linux kernel 3.2 and 4.x before 4.9.4 allows physically proximate attackers to cause a denial of service (integer underflow) or possibly have unspecified other impact via a crafted HID report. |
| CVE-2017-7261 | The vmw_surface_define_ioctl function in drivers/gpu/drm/vmwgfx/vmwgfx_surface.c in the Linux kernel through 4.10.5 does not check for a zero value of certain levels data, which allows local users to cause a denial of service (ZERO_SIZE_PTR dereference, and GPF and possibly panic) via a crafted ioctl call for a /dev/dri/renderD* device. |
| CVE-2017-7187 | The sg_ioctl function in drivers/scsi/sg.c in the Linux kernel through 4.10.4 allows local users to cause a denial of service (stack-based buffer overflow) or possibly have unspecified other impact via a large command size in an SG_NEXT_CMD_LEN ioctl call, leading to out-of-bounds write access in the sg_write function. |
| CVE-2017-7184 | The xfrm_replay_verify_len function in net/xfrm/xfrm_user.c in the Linux kernel through 4.10.6 does not validate certain size data after an XFRM_MSG_NEWAE update, which allows local users to obtain root privileges or cause a denial of service (heap-based out-of-bounds access) by leveraging the CAP_NET_ADMIN capability, as demonstrated during a Pwn2Own competition at CanSecWest 2017 for the Ubuntu 16.10 linux-image-* package 4.8.0.41.52. |
| CVE-2017-6951 | The keyring_search_aux function in security/keys/keyring.c in the Linux kernel through 3.14.79 allows local users to cause a denial of service (NULL pointer dereference and OOPS) via a request_key system call for the "dead" type. |
| CVE-2017-6874 | Race condition in kernel/ucount.c in the Linux kernel through 4.10.2 allows local users to cause a denial of service (use-after-free and system crash) or possibly have unspecified other impact via crafted system calls that leverage certain decrement behavior that causes incorrect interaction between put_ucounts and get_ucounts. |
| CVE-2017-6516 | A Local Privilege Escalation Vulnerability in MagniComp's Sysinfo before 10-H64 for Linux and UNIX platforms could allow a local attacker to gain elevated privileges. Parts of SysInfo require setuid-to-root access in order to access restricted system files and make restricted kernel calls. This access could be exploited by a local attacker to gain a root shell prompt using the right combination of environment variables and command line arguments. |
| CVE-2017-6353 | net/sctp/socket.c in the Linux kernel through 4.10.1 does not properly restrict association peel-off operations during certain wait states, which allows local users to cause a denial of service (invalid unlock and double free) via a multithreaded application. NOTE: this vulnerability exists because of an incorrect fix for CVE-2017-5986. |
| CVE-2017-6348 | The hashbin_delete function in net/irda/irqueue.c in the Linux kernel before 4.9.13 improperly manages lock dropping, which allows local users to cause a denial of service (deadlock) via crafted operations on IrDA devices. |
| CVE-2017-6347 | The ip_cmsg_recv_checksum function in net/ipv4/ip_sockglue.c in the Linux kernel before 4.10.1 has incorrect expectations about skb data layout, which allows local users to cause a denial of service (buffer over-read) or possibly have unspecified other impact via crafted system calls, as demonstrated by use of the MSG_MORE flag in conjunction with loopback UDP transmission. |
| CVE-2017-6346 | Race condition in net/packet/af_packet.c in the Linux kernel before 4.9.13 allows local users to cause a denial of service (use-after-free) or possibly have unspecified other impact via a multithreaded application that makes PACKET_FANOUT setsockopt system calls. |
| CVE-2017-6345 | The LLC subsystem in the Linux kernel before 4.9.13 does not ensure that a certain destructor exists in required circumstances, which allows local users to cause a denial of service (BUG_ON) or possibly have unspecified other impact via crafted system calls. |
| CVE-2017-6214 | The tcp_splice_read function in net/ipv4/tcp.c in the Linux kernel before 4.9.11 allows remote attackers to cause a denial of service (infinite loop and soft lockup) via vectors involving a TCP packet with the URG flag. |
| CVE-2017-6211 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the processing of a downlink supplementary services message, a buffer overflow can occur. |
| CVE-2017-6074 | The dccp_rcv_state_process function in net/dccp/input.c in the Linux kernel through 4.9.11 mishandles DCCP_PKT_REQUEST packet data structures in the LISTEN state, which allows local users to obtain root privileges or cause a denial of service (double free) via an application that makes an IPV6_RECVPKTINFO setsockopt system call. |
| CVE-2017-6001 | Race condition in kernel/events/core.c in the Linux kernel before 4.9.7 allows local users to gain privileges via a crafted application that makes concurrent perf_event_open system calls for moving a software group into a hardware context. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-6786. |
| CVE-2017-5986 | Race condition in the sctp_wait_for_sndbuf function in net/sctp/socket.c in the Linux kernel before 4.9.11 allows local users to cause a denial of service (assertion failure and panic) via a multithreaded application that peels off an association in a certain buffer-full state. |
| CVE-2017-5972 | The TCP stack in the Linux kernel 3.x does not properly implement a SYN cookie protection mechanism for the case of a fast network connection, which allows remote attackers to cause a denial of service (CPU consumption) by sending many TCP SYN packets, as demonstrated by an attack against the kernel-3.10.0 package in CentOS Linux 7. NOTE: third parties have been unable to discern any relationship between the GitHub Engineering finding and the Trigemini.c attack code. |
| CVE-2017-5970 | The ipv4_pktinfo_prepare function in net/ipv4/ip_sockglue.c in the Linux kernel through 4.9.9 allows attackers to cause a denial of service (system crash) via (1) an application that makes crafted system calls or possibly (2) IPv4 traffic with invalid IP options. |
| CVE-2017-5967 | The time subsystem in the Linux kernel through 4.9.9, when CONFIG_TIMER_STATS is enabled, allows local users to discover real PID values (as distinguished from PID values inside a PID namespace) by reading the /proc/timer_list file, related to the print_timer function in kernel/time/timer_list.c and the __timer_stats_timer_set_start_info function in kernel/time/timer.c. |
| CVE-2017-5897 | The ip6gre_err function in net/ipv6/ip6_gre.c in the Linux kernel allows remote attackers to have unspecified impact via vectors involving GRE flags in an IPv6 packet, which trigger an out-of-bounds access. |
| CVE-2017-5669 | The do_shmat function in ipc/shm.c in the Linux kernel through 4.9.12 does not restrict the address calculated by a certain rounding operation, which allows local users to map page zero, and consequently bypass a protection mechanism that exists for the mmap system call, by making crafted shmget and shmat system calls in a privileged context. |
| CVE-2017-5577 | The vc4_get_bcl function in drivers/gpu/drm/vc4/vc4_gem.c in the VideoCore DRM driver in the Linux kernel before 4.9.7 does not set an errno value upon certain overflow detections, which allows local users to cause a denial of service (incorrect pointer dereference and OOPS) via inconsistent size values in a VC4_SUBMIT_CL ioctl call. |
| CVE-2017-5576 | Integer overflow in the vc4_get_bcl function in drivers/gpu/drm/vc4/vc4_gem.c in the VideoCore DRM driver in the Linux kernel before 4.9.7 allows local users to cause a denial of service or possibly have unspecified other impact via a crafted size value in a VC4_SUBMIT_CL ioctl call. |
| CVE-2017-5551 | The simple_set_acl function in fs/posix_acl.c in the Linux kernel before 4.9.6 preserves the setgid bit during a setxattr call involving a tmpfs filesystem, which allows local users to gain group privileges by leveraging the existence of a setgid program with restrictions on execute permissions. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-7097. |
| CVE-2017-5550 | Off-by-one error in the pipe_advance function in lib/iov_iter.c in the Linux kernel before 4.9.5 allows local users to obtain sensitive information from uninitialized heap-memory locations in opportunistic circumstances by reading from a pipe after an incorrect buffer-release decision. |
| CVE-2017-5549 | The klsi_105_get_line_state function in drivers/usb/serial/kl5kusb105.c in the Linux kernel before 4.9.5 places uninitialized heap-memory contents into a log entry upon a failure to read the line status, which allows local users to obtain sensitive information by reading the log. |
| CVE-2017-5548 | drivers/net/ieee802154/atusb.c in the Linux kernel 4.9.x before 4.9.6 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist. |
| CVE-2017-5547 | drivers/hid/hid-corsair.c in the Linux kernel 4.9.x before 4.9.6 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist. |
| CVE-2017-5546 | The freelist-randomization feature in mm/slab.c in the Linux kernel 4.8.x and 4.9.x before 4.9.5 allows local users to cause a denial of service (duplicate freelist entries and system crash) or possibly have unspecified other impact in opportunistic circumstances by leveraging the selection of a large value for a random number. |
| CVE-2017-5206 | Firejail before 0.9.44.4, when running on a Linux kernel before 4.8, allows context-dependent attackers to bypass a seccomp-based sandbox protection mechanism via the --allow-debuggers argument. |
| CVE-2017-5123 | Insufficient data validation in waitid allowed an user to escape sandboxes on Linux. |
| CVE-2017-2671 | The ping_unhash function in net/ipv4/ping.c in the Linux kernel through 4.10.8 is too late in obtaining a certain lock and consequently cannot ensure that disconnect function calls are safe, which allows local users to cause a denial of service (panic) by leveraging access to the protocol value of IPPROTO_ICMP in a socket system call. |
| CVE-2017-2647 | The KEYS subsystem in the Linux kernel before 3.18 allows local users to gain privileges or cause a denial of service (NULL pointer dereference and system crash) via vectors involving a NULL value for a certain match field, related to the keyring_search_iterator function in keyring.c. |
| CVE-2017-2636 | Race condition in drivers/tty/n_hdlc.c in the Linux kernel through 4.10.1 allows local users to gain privileges or cause a denial of service (double free) by setting the HDLC line discipline. |
| CVE-2017-2634 | It was found that the Linux kernel's Datagram Congestion Control Protocol (DCCP) implementation before 2.6.22.17 used the IPv4-only inet_sk_rebuild_header() function for both IPv4 and IPv6 DCCP connections, which could result in memory corruptions. A remote attacker could use this flaw to crash the system. |
| CVE-2017-2618 | A flaw was found in the Linux kernel's handling of clearing SELinux attributes on /proc/pid/attr files before 4.9.10. An empty (null) write to this file can crash the system by causing the system to attempt to access unmapped kernel memory. |
| CVE-2017-2596 | The nested_vmx_check_vmptr function in arch/x86/kvm/vmx.c in the Linux kernel through 4.9.8 improperly emulates the VMXON instruction, which allows KVM L1 guest OS users to cause a denial of service (host OS memory consumption) by leveraging the mishandling of page references. |
| CVE-2017-2584 | arch/x86/kvm/emulate.c in the Linux kernel through 4.9.3 allows local users to obtain sensitive information from kernel memory or cause a denial of service (use-after-free) via a crafted application that leverages instruction emulation for fxrstor, fxsave, sgdt, and sidt. |
| CVE-2017-2583 | The load_segment_descriptor implementation in arch/x86/kvm/emulate.c in the Linux kernel before 4.9.5 improperly emulates a "MOV SS, NULL selector" instruction, which allows guest OS users to cause a denial of service (guest OS crash) or gain guest OS privileges via a crafted application. |
| CVE-2017-18595 | An issue was discovered in the Linux kernel before 4.14.11. A double free may be caused by the function allocate_trace_buffer in the file kernel/trace/trace.c. |
| CVE-2017-18552 | An issue was discovered in net/rds/af_rds.c in the Linux kernel before 4.11. There is an out of bounds write and read in the function rds_recv_track_latency. |
| CVE-2017-18551 | An issue was discovered in drivers/i2c/i2c-core-smbus.c in the Linux kernel before 4.14.15. There is an out of bounds write in the function i2c_smbus_xfer_emulated. |
| CVE-2017-18550 | An issue was discovered in drivers/scsi/aacraid/commctrl.c in the Linux kernel before 4.13. There is potential exposure of kernel stack memory because aac_get_hba_info does not initialize the hbainfo structure. |
| CVE-2017-18549 | An issue was discovered in drivers/scsi/aacraid/commctrl.c in the Linux kernel before 4.13. There is potential exposure of kernel stack memory because aac_send_raw_srb does not initialize the reply structure. |
| CVE-2017-18509 | An issue was discovered in net/ipv6/ip6mr.c in the Linux kernel before 4.11. By setting a specific socket option, an attacker can control a pointer in kernel land and cause an inet_csk_listen_stop general protection fault, or potentially execute arbitrary code under certain circumstances. The issue can be triggered as root (e.g., inside a default LXC container or with the CAP_NET_ADMIN capability) or after namespace unsharing. This occurs because sk_type and protocol are not checked in the appropriate part of the ip6_mroute_* functions. NOTE: this affects Linux distributions that use 4.9.x longterm kernels before 4.9.187. |
| CVE-2017-18379 | In the Linux kernel before 4.14, an out of boundary access happened in drivers/nvme/target/fc.c. |
| CVE-2017-18360 | In change_port_settings in drivers/usb/serial/io_ti.c in the Linux kernel before 4.11.3, local users could cause a denial of service by division-by-zero in the serial device layer by trying to set very high baud rates. |
| CVE-2017-18344 | The timer_create syscall implementation in kernel/time/posix-timers.c in the Linux kernel before 4.14.8 doesn't properly validate the sigevent->sigev_notify field, which leads to out-of-bounds access in the show_timer function (called when /proc/$PID/timers is read). This allows userspace applications to read arbitrary kernel memory (on a kernel built with CONFIG_POSIX_TIMERS and CONFIG_CHECKPOINT_RESTORE). |
| CVE-2017-18281 | A bool variable in Video function, which gets typecasted to int before being read could result in an out of bound read access in all Android releases from CAF using the linux kernel |
| CVE-2017-18270 | In the Linux kernel before 4.13.5, a local user could create keyrings for other users via keyctl commands, setting unwanted defaults or causing a denial of service. |
| CVE-2017-18261 | The arch_timer_reg_read_stable macro in arch/arm64/include/asm/arch_timer.h in the Linux kernel before 4.13 allows local users to cause a denial of service (infinite recursion) by writing to a file under /sys/kernel/debug in certain circumstances, as demonstrated by a scenario involving debugfs, ftrace, PREEMPT_TRACER, and FUNCTION_GRAPH_TRACER. |
| CVE-2017-18257 | The __get_data_block function in fs/f2fs/data.c in the Linux kernel before 4.11 allows local users to cause a denial of service (integer overflow and loop) via crafted use of the open and fallocate system calls with an FS_IOC_FIEMAP ioctl. |
| CVE-2017-18255 | The perf_cpu_time_max_percent_handler function in kernel/events/core.c in the Linux kernel before 4.11 allows local users to cause a denial of service (integer overflow) or possibly have unspecified other impact via a large value, as demonstrated by an incorrect sample-rate calculation. |
| CVE-2017-18249 | The add_free_nid function in fs/f2fs/node.c in the Linux kernel before 4.12 does not properly track an allocated nid, which allows local users to cause a denial of service (race condition) or possibly have unspecified other impact via concurrent threads. |
| CVE-2017-18241 | fs/f2fs/segment.c in the Linux kernel before 4.13 allows local users to cause a denial of service (NULL pointer dereference and panic) by using a noflush_merge option that triggers a NULL value for a flush_cmd_control data structure. |
| CVE-2017-18232 | The Serial Attached SCSI (SAS) implementation in the Linux kernel through 4.15.9 mishandles a mutex within libsas, which allows local users to cause a denial of service (deadlock) by triggering certain error-handling code. |
| CVE-2017-18224 | In the Linux kernel before 4.15, fs/ocfs2/aops.c omits use of a semaphore and consequently has a race condition for access to the extent tree during read operations in DIRECT mode, which allows local users to cause a denial of service (BUG) by modifying a certain e_cpos field. |
| CVE-2017-18222 | In the Linux kernel before 4.12, Hisilicon Network Subsystem (HNS) does not consider the ETH_SS_PRIV_FLAGS case when retrieving sset_count data, which allows local users to cause a denial of service (buffer overflow and memory corruption) or possibly have unspecified other impact, as demonstrated by incompatibility between hns_get_sset_count and ethtool_get_strings. |
| CVE-2017-18221 | The __munlock_pagevec function in mm/mlock.c in the Linux kernel before 4.11.4 allows local users to cause a denial of service (NR_MLOCK accounting corruption) via crafted use of mlockall and munlockall system calls. |
| CVE-2017-18218 | In drivers/net/ethernet/hisilicon/hns/hns_enet.c in the Linux kernel before 4.13, local users can cause a denial of service (use-after-free and BUG) or possibly have unspecified other impact by leveraging differences in skb handling between hns_nic_net_xmit_hw and hns_nic_net_xmit. |
| CVE-2017-18216 | In fs/ocfs2/cluster/nodemanager.c in the Linux kernel before 4.15, local users can cause a denial of service (NULL pointer dereference and BUG) because a required mutex is not used. |
| CVE-2017-18208 | The madvise_willneed function in mm/madvise.c in the Linux kernel before 4.14.4 allows local users to cause a denial of service (infinite loop) by triggering use of MADVISE_WILLNEED for a DAX mapping. |
| CVE-2017-18204 | The ocfs2_setattr function in fs/ocfs2/file.c in the Linux kernel before 4.14.2 allows local users to cause a denial of service (deadlock) via DIO requests. |
| CVE-2017-18203 | The dm_get_from_kobject function in drivers/md/dm.c in the Linux kernel before 4.14.3 allow local users to cause a denial of service (BUG) by leveraging a race condition with __dm_destroy during creation and removal of DM devices. |
| CVE-2017-18202 | The __oom_reap_task_mm function in mm/oom_kill.c in the Linux kernel before 4.14.4 mishandles gather operations, which allows attackers to cause a denial of service (TLB entry leak or use-after-free) or possibly have unspecified other impact by triggering a copy_to_user call within a certain time window. |
| CVE-2017-18200 | The f2fs implementation in the Linux kernel before 4.14 mishandles reference counts associated with f2fs_wait_discard_bios calls, which allows local users to cause a denial of service (BUG), as demonstrated by fstrim. |
| CVE-2017-18193 | fs/f2fs/extent_cache.c in the Linux kernel before 4.13 mishandles extent trees, which allows local users to cause a denial of service (BUG) via an application with multiple threads. |
| CVE-2017-18174 | In the Linux kernel before 4.7, the amd_gpio_remove function in drivers/pinctrl/pinctrl-amd.c calls the pinctrl_unregister function, leading to a double free. |
| CVE-2017-18169 | User process can perform the kernel DOS in ashmem when doing cache maintenance operation in all Android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the Linux kernel. |
| CVE-2017-18159 | In Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05, while processing a StrHwPlatform with length smaller than EFICHIPINFO_MAX_ID_LENGTH, an array out of bounds access may occur. |
| CVE-2017-18158 | Possible buffer overflows and array out of bounds accesses in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05 while flashing images. |
| CVE-2017-18154 | A crafted binder request can cause an arbitrary unmap in MediaServer in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2017-18147 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, in MMCP, a downlink message is not being properly validated. |
| CVE-2017-18079 | drivers/input/serio/i8042.c in the Linux kernel before 4.12.4 allows attackers to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact because the port->exists value can change after it is validated. |
| CVE-2017-18075 | crypto/pcrypt.c in the Linux kernel before 4.14.13 mishandles freeing instances, allowing a local user able to access the AF_ALG-based AEAD interface (CONFIG_CRYPTO_USER_API_AEAD) and pcrypt (CONFIG_CRYPTO_PCRYPT) to cause a denial of service (kfree of an incorrect pointer) or possibly have unspecified other impact by executing a crafted sequence of system calls. |
| CVE-2017-18070 | In wma_ndp_end_response_event_handler(), the variable len_end_rsp is a uint32 which can be overflowed if the value of variable "event->num_ndp_end_rsp_per_ndi_list" is very large which can then lead to a heap overwrite of the heap object end_rsp in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2017-18069 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper message length calculation in oem_cmd_handler() while processing a WLAN_NL_MSG_OEM netlink message leads to buffer overread. |
| CVE-2017-18068 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper buffer length calculation in wma_roam_scan_filter() leads to buffer overflow. |
| CVE-2017-18067 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation while processing an encrypted authentication management frame in lim_send_auth_mgmt_frame() leads to buffer overflow. |
| CVE-2017-18066 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper controls in MSM CORE leads to use memory after it is freed in msm_core_ioctl(). |
| CVE-2017-18065 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for vent->vdev_id in wma_action_frame_filter_mac_event_handler(), which is received from firmware, leads to arbitrary code execution. |
| CVE-2017-18064 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for p2p_noa_info in wma_send_bcn_buf_ll() which is received from firmware leads to potential buffer overflow. |
| CVE-2017-18063 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for nlo_event in wma_nlo_match_evt_handler(), which is received from firmware, leads to potential out of bound memory access. |
| CVE-2017-18062 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, potential buffer overflow can happen when processing UTF event in wma_process_utf_event(). |
| CVE-2017-18061 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, potential buffer overflow can happen when processing AOA measurement event from WIGIG firmware in wil_aoa_evt_meas(). |
| CVE-2017-18060 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for resp_event->vdev_id in wma_unified_bcntx_status_event_handler(), which is received from firmware, leads to potential out of bounds memory read. |
| CVE-2017-18059 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for vdev id in wma_scan_event_callback(), which is received from firmware, leads to potential out of bounds memory read. |
| CVE-2017-18058 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for wow_buf_pkt_len in wma_wow_wakeup_host_event() which is received from firmware leads to potential out of bounds memory read. |
| CVE-2017-18057 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for vdev id in wma_nlo_scan_cmp_evt_handler(), which is received from firmware, leads to potential out of bounds memory read. |
| CVE-2017-18056 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for vdev_id in wma_unified_bcntx_status_event_handler() which is received from firmware leads to potential out of bounds memory read. |
| CVE-2017-18055 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for wmi_event->num_vdev_mac_entries in wma_pdev_set_hw_mode_resp_evt_handler(), which is received from firmware, leads to potential buffer overflow. |
| CVE-2017-18054 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for num_vdev_mac_entries in wma_pdev_hw_mode_transition_evt_handler(), which is received from firmware, leads to potential buffer overflow. |
| CVE-2017-18053 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for fix_param->vdev_id in wma_p2p_lo_event_handler(), which is received from firmware, leads to potential out of bounds memory read. |
| CVE-2017-18052 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for cmpl_params->num_reports, param_buf->desc_ids and param_buf->status in wma_mgmt_tx_bundle_completion_handler(), which is received from firmware, leads to potential out of bounds memory read. |
| CVE-2017-18051 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for event->vdev_id in wma_rcpi_event_handler(), which is received from firmware, leads to potential out of bounds memory read. |
| CVE-2017-18050 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation for vdev_map in wma_tbttoffset_update_event_handler(), which is received from firmware, leads to potential buffer overwrite and out of bounds memory read. |
| CVE-2017-18017 | The tcpmss_mangle_packet function in net/netfilter/xt_TCPMSS.c in the Linux kernel before 4.11, and 4.9.x before 4.9.36, allows remote attackers to cause a denial of service (use-after-free and memory corruption) or possibly have unspecified other impact by leveraging the presence of xt_TCPMSS in an iptables action. |
| CVE-2017-17975 | Use-after-free in the usbtv_probe function in drivers/media/usb/usbtv/usbtv-core.c in the Linux kernel through 4.14.10 allows attackers to cause a denial of service (system crash) or possibly have unspecified other impact by triggering failure of audio registration, because a kfree of the usbtv data structure occurs during a usbtv_video_free call, but the usbtv_video_fail label's code attempts to both access and free this data structure. |
| CVE-2017-17864 | kernel/bpf/verifier.c in the Linux kernel through 4.14.8 mishandles states_equal comparisons between the pointer data type and the UNKNOWN_VALUE data type, which allows local users to obtain potentially sensitive address information, aka a "pointer leak." |
| CVE-2017-17863 | kernel/bpf/verifier.c in the Linux kernel 4.9.x through 4.9.71 does not check the relationship between pointer values and the BPF stack, which allows local users to cause a denial of service (integer overflow or invalid memory access) or possibly have unspecified other impact. |
| CVE-2017-17862 | kernel/bpf/verifier.c in the Linux kernel through 4.14.8 ignores unreachable code, even though it would still be processed by JIT compilers. This behavior, also considered an improper branch-pruning logic issue, could possibly be used by local users for denial of service. |
| CVE-2017-17857 | The check_stack_boundary function in kernel/bpf/verifier.c in the Linux kernel through 4.14.8 allows local users to cause a denial of service (memory corruption) or possibly have unspecified other impact by leveraging mishandling of invalid variable stack read operations. |
| CVE-2017-17856 | kernel/bpf/verifier.c in the Linux kernel through 4.14.8 allows local users to cause a denial of service (memory corruption) or possibly have unspecified other impact by leveraging the lack of stack-pointer alignment enforcement. |
| CVE-2017-17855 | kernel/bpf/verifier.c in the Linux kernel through 4.14.8 allows local users to cause a denial of service (memory corruption) or possibly have unspecified other impact by leveraging improper use of pointers in place of scalars. |
| CVE-2017-17854 | kernel/bpf/verifier.c in the Linux kernel through 4.14.8 allows local users to cause a denial of service (integer overflow and memory corruption) or possibly have unspecified other impact by leveraging unrestricted integer values for pointer arithmetic. |
| CVE-2017-17853 | kernel/bpf/verifier.c in the Linux kernel through 4.14.8 allows local users to cause a denial of service (memory corruption) or possibly have unspecified other impact by leveraging incorrect BPF_RSH signed bounds calculations. |
| CVE-2017-17852 | kernel/bpf/verifier.c in the Linux kernel through 4.14.8 allows local users to cause a denial of service (memory corruption) or possibly have unspecified other impact by leveraging mishandling of 32-bit ALU ops. |
| CVE-2017-17807 | The KEYS subsystem in the Linux kernel before 4.14.6 omitted an access-control check when adding a key to the current task's "default request-key keyring" via the request_key() system call, allowing a local user to use a sequence of crafted system calls to add keys to a keyring with only Search permission (not Write permission) to that keyring, related to construct_get_dest_keyring() in security/keys/request_key.c. |
| CVE-2017-17806 | The HMAC implementation (crypto/hmac.c) in the Linux kernel before 4.14.8 does not validate that the underlying cryptographic hash algorithm is unkeyed, allowing a local attacker able to use the AF_ALG-based hash interface (CONFIG_CRYPTO_USER_API_HASH) and the SHA-3 hash algorithm (CONFIG_CRYPTO_SHA3) to cause a kernel stack buffer overflow by executing a crafted sequence of system calls that encounter a missing SHA-3 initialization. |
| CVE-2017-17805 | The Salsa20 encryption algorithm in the Linux kernel before 4.14.8 does not correctly handle zero-length inputs, allowing a local attacker able to use the AF_ALG-based skcipher interface (CONFIG_CRYPTO_USER_API_SKCIPHER) to cause a denial of service (uninitialized-memory free and kernel crash) or have unspecified other impact by executing a crafted sequence of system calls that use the blkcipher_walk API. Both the generic implementation (crypto/salsa20_generic.c) and x86 implementation (arch/x86/crypto/salsa20_glue.c) of Salsa20 were vulnerable. |
| CVE-2017-17770 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, in a power driver ioctl handler, an Untrusted Pointer Dereference may potentially occur. |
| CVE-2017-17767 | In all Qualcomm products with Android releases from CAF using the Linux kernel, the IL client may free a buffer OMX Video Encoder Component and then subsequently access the already freed buffer. |
| CVE-2017-17765 | In all Qualcomm products with Android releases from CAF using the Linux kernel, multiple values received from firmware are not properly validated in wma_get_ll_stats_ext_buf() and are used to allocate the sizes of buffers and may be vulnerable to integer overflow leading to buffer overflow. |
| CVE-2017-17764 | In all Qualcomm products with Android releases from CAF using the Linux kernel, the num_failure_info value from firmware is not properly validated in wma_rx_aggr_failure_event_handler() so that an integer overflow vulnerability in a buffer size calculation may potentially lead to a buffer overflow. |
| CVE-2017-17741 | The KVM implementation in the Linux kernel through 4.14.7 allows attackers to obtain potentially sensitive information from kernel memory, aka a write_mmio stack-based out-of-bounds read, related to arch/x86/kvm/x86.c and include/trace/events/kvm.h. |
| CVE-2017-17712 | The raw_sendmsg() function in net/ipv4/raw.c in the Linux kernel through 4.14.6 has a race condition in inet->hdrincl that leads to uninitialized stack pointer usage; this allows a local user to execute code and gain privileges. |
| CVE-2017-17558 | The usb_destroy_configuration function in drivers/usb/core/config.c in the USB core subsystem in the Linux kernel through 4.14.5 does not consider the maximum number of configurations and interfaces before attempting to release resources, which allows local users to cause a denial of service (out-of-bounds write access) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-17450 | net/netfilter/xt_osf.c in the Linux kernel through 4.14.4 does not require the CAP_NET_ADMIN capability for add_callback and remove_callback operations, which allows local users to bypass intended access restrictions because the xt_osf_fingers data structure is shared across all net namespaces. |
| CVE-2017-17449 | The __netlink_deliver_tap_skb function in net/netlink/af_netlink.c in the Linux kernel through 4.14.4, when CONFIG_NLMON is enabled, does not restrict observations of Netlink messages to a single net namespace, which allows local users to obtain sensitive information by leveraging the CAP_NET_ADMIN capability to sniff an nlmon interface for all Netlink activity on the system. |
| CVE-2017-17448 | net/netfilter/nfnetlink_cthelper.c in the Linux kernel through 4.14.4 does not require the CAP_NET_ADMIN capability for new, get, and del operations, which allows local users to bypass intended access restrictions because the nfnl_cthelper_list data structure is shared across all net namespaces. |
| CVE-2017-17053 | The init_new_context function in arch/x86/include/asm/mmu_context.h in the Linux kernel before 4.12.10 does not correctly handle errors from LDT table allocation when forking a new process, allowing a local attacker to achieve a use-after-free or possibly have unspecified other impact by running a specially crafted program. This vulnerability only affected kernels built with CONFIG_MODIFY_LDT_SYSCALL=y. |
| CVE-2017-17052 | The mm_init function in kernel/fork.c in the Linux kernel before 4.12.10 does not clear the ->exe_file member of a new process's mm_struct, allowing a local attacker to achieve a use-after-free or possibly have unspecified other impact by running a specially crafted program. |
| CVE-2017-16996 | kernel/bpf/verifier.c in the Linux kernel through 4.14.8 allows local users to cause a denial of service (memory corruption) or possibly have unspecified other impact by leveraging register truncation mishandling. |
| CVE-2017-16995 | The check_alu_op function in kernel/bpf/verifier.c in the Linux kernel through 4.4 allows local users to cause a denial of service (memory corruption) or possibly have unspecified other impact by leveraging incorrect sign extension. |
| CVE-2017-16994 | The walk_hugetlb_range function in mm/pagewalk.c in the Linux kernel before 4.14.2 mishandles holes in hugetlb ranges, which allows local users to obtain sensitive information from uninitialized kernel memory via crafted use of the mincore() system call. |
| CVE-2017-16939 | The XFRM dump policy implementation in net/xfrm/xfrm_user.c in the Linux kernel before 4.13.11 allows local users to gain privileges or cause a denial of service (use-after-free) via a crafted SO_RCVBUF setsockopt system call in conjunction with XFRM_MSG_GETPOLICY Netlink messages. |
| CVE-2017-16914 | The "stub_send_ret_submit()" function (drivers/usb/usbip/stub_tx.c) in the Linux Kernel before version 4.14.8, 4.9.71, 4.1.49, and 4.4.107 allows attackers to cause a denial of service (NULL pointer dereference) via a specially crafted USB over IP packet. |
| CVE-2017-16913 | The "stub_recv_cmd_submit()" function (drivers/usb/usbip/stub_rx.c) in the Linux Kernel before version 4.14.8, 4.9.71, and 4.4.114 when handling CMD_SUBMIT packets allows attackers to cause a denial of service (arbitrary memory allocation) via a specially crafted USB over IP packet. |
| CVE-2017-16912 | The "get_pipe()" function (drivers/usb/usbip/stub_rx.c) in the Linux Kernel before version 4.14.8, 4.9.71, and 4.4.114 allows attackers to cause a denial of service (out-of-bounds read) via a specially crafted USB over IP packet. |
| CVE-2017-16911 | The vhci_hcd driver in the Linux Kernel before version 4.14.8 and 4.4.114 allows allows local attackers to disclose kernel memory addresses. Successful exploitation requires that a USB device is attached over IP. |
| CVE-2017-16650 | The qmi_wwan_bind function in drivers/net/usb/qmi_wwan.c in the Linux kernel through 4.13.11 allows local users to cause a denial of service (divide-by-zero error and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16649 | The usbnet_generic_cdc_bind function in drivers/net/usb/cdc_ether.c in the Linux kernel through 4.13.11 allows local users to cause a denial of service (divide-by-zero error and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16648 | The dvb_frontend_free function in drivers/media/dvb-core/dvb_frontend.c in the Linux kernel through 4.13.11 allows local users to cause a denial of service (use-after-free and system crash) or possibly have unspecified other impact via a crafted USB device. NOTE: the function was later renamed __dvb_frontend_free. |
| CVE-2017-16647 | drivers/net/usb/asix_devices.c in the Linux kernel through 4.13.11 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16646 | drivers/media/usb/dvb-usb/dib0700_devices.c in the Linux kernel through 4.13.11 allows local users to cause a denial of service (BUG and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16645 | The ims_pcu_get_cdc_union_desc function in drivers/input/misc/ims-pcu.c in the Linux kernel through 4.13.11 allows local users to cause a denial of service (ims_pcu_parse_cdc_data out-of-bounds read and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16644 | The hdpvr_probe function in drivers/media/usb/hdpvr/hdpvr-core.c in the Linux kernel through 4.13.11 allows local users to cause a denial of service (improper error handling and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16643 | The parse_hid_report_descriptor function in drivers/input/tablet/gtco.c in the Linux kernel before 4.13.11 allows local users to cause a denial of service (out-of-bounds read and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16538 | drivers/media/usb/dvb-usb-v2/lmedm04.c in the Linux kernel through 4.13.11 allows local users to cause a denial of service (general protection fault and system crash) or possibly have unspecified other impact via a crafted USB device, related to a missing warm-start check and incorrect attach timing (dm04_lme2510_frontend_attach versus dm04_lme2510_tuner). |
| CVE-2017-16537 | The imon_probe function in drivers/media/rc/imon.c in the Linux kernel through 4.13.11 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16536 | The cx231xx_usb_probe function in drivers/media/usb/cx231xx/cx231xx-cards.c in the Linux kernel through 4.13.11 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16535 | The usb_get_bos_descriptor function in drivers/usb/core/config.c in the Linux kernel before 4.13.10 allows local users to cause a denial of service (out-of-bounds read and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16534 | The cdc_parse_cdc_header function in drivers/usb/core/message.c in the Linux kernel before 4.13.6 allows local users to cause a denial of service (out-of-bounds read and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16533 | The usbhid_parse function in drivers/hid/usbhid/hid-core.c in the Linux kernel before 4.13.8 allows local users to cause a denial of service (out-of-bounds read and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16532 | The get_endpoints function in drivers/usb/misc/usbtest.c in the Linux kernel through 4.13.11 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16531 | drivers/usb/core/config.c in the Linux kernel before 4.13.6 allows local users to cause a denial of service (out-of-bounds read and system crash) or possibly have unspecified other impact via a crafted USB device, related to the USB_DT_INTERFACE_ASSOCIATION descriptor. |
| CVE-2017-16530 | The uas driver in the Linux kernel before 4.13.6 allows local users to cause a denial of service (out-of-bounds read and system crash) or possibly have unspecified other impact via a crafted USB device, related to drivers/usb/storage/uas-detect.h and drivers/usb/storage/uas.c. |
| CVE-2017-16529 | The snd_usb_create_streams function in sound/usb/card.c in the Linux kernel before 4.13.6 allows local users to cause a denial of service (out-of-bounds read and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16528 | sound/core/seq_device.c in the Linux kernel before 4.13.4 allows local users to cause a denial of service (snd_rawmidi_dev_seq_free use-after-free and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16527 | sound/usb/mixer.c in the Linux kernel before 4.13.8 allows local users to cause a denial of service (snd_usb_mixer_interrupt use-after-free and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16526 | drivers/uwb/uwbd.c in the Linux kernel before 4.13.6 allows local users to cause a denial of service (general protection fault and system crash) or possibly have unspecified other impact via a crafted USB device. |
| CVE-2017-16525 | The usb_serial_console_disconnect function in drivers/usb/serial/console.c in the Linux kernel before 4.13.8 allows local users to cause a denial of service (use-after-free and system crash) or possibly have unspecified other impact via a crafted USB device, related to disconnection and failed setup. |
| CVE-2017-15951 | The KEYS subsystem in the Linux kernel before 4.13.10 does not correctly synchronize the actions of updating versus finding a key in the "negative" state to avoid a race condition, which allows local users to cause a denial of service or possibly have unspecified other impact via crafted system calls. |
| CVE-2017-15868 | The bnep_add_connection function in net/bluetooth/bnep/core.c in the Linux kernel before 3.19 does not ensure that an l2cap socket is available, which allows local users to gain privileges via a crafted application. |
| CVE-2017-15862 | In all Qualcomm products with Android releases from CAF using the Linux kernel, in wma_unified_link_radio_stats_event_handler(), the number of radio channels coming from firmware is not properly validated, potentially leading to an integer overflow vulnerability followed by a buffer overflow. |
| CVE-2017-15861 | In all Qualcomm products with Android releases from CAF using the Linux kernel, in the function wma_roam_synch_event_handler, vdev_id is received from firmware and used to access an array without validation. |
| CVE-2017-15860 | In all Qualcomm products with Android releases from CAF using the Linux kernel, while processing an encrypted authentication management frame, a stack buffer overflow may potentially occur. |
| CVE-2017-15857 | In the camera driver, an out-of-bounds access can occur due to an error in copying region params from user space in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2017-15856 | Due to a race condition while processing the power stats debug file to read status, a double free condition can occur in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2017-15855 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, the camera application triggers "user-memory-access" issue as the Camera CPP module Linux driver directly accesses the application provided buffer, which resides in user space. An unchecked userspace value (ioctl_ptr->len) is used to copy contents to a kernel buffer which can lead to kernel buffer overflow. |
| CVE-2017-15854 | The value of fix_param->num_chans is received from firmware and if it is too large, an integer overflow can occur in wma_radio_chan_stats_event_handler() for the derived length len leading to a subsequent buffer overflow in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2017-15853 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, while processing PTT commands, ptt_sock_send_msg_to_app() is invoked without validating the packet length. If the packet length is invalid, then a buffer over-read can occur. |
| CVE-2017-15851 | Lack of copy_from_user and information leak in function "msm_ois_subdev_do_ioctl, file msm_ois.c can lead to a camera crash in all Android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the Linux kernel |
| CVE-2017-15850 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, userspace can read values from audio codec registers. |
| CVE-2017-15849 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a LayerStack can be destroyed in between Validate and Commit by the application resulting in a Use After Free condition. |
| CVE-2017-15848 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the fastrpc kernel driver, a buffer overflow vulnerability from userspace may potentially exist. |
| CVE-2017-15847 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the SPCom kernel driver, a race condition exists when creating a channel. |
| CVE-2017-15845 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, an invalid input of firmware size (negative value) from user space can potentially lead to the memory leak or buffer overflow during the WLAN cal data store operation. |
| CVE-2017-15844 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while processing the function for writing device values into flash, uninitialized memory can be written to flash. |
| CVE-2017-15843 | Due to a race condition in a bus driver, a double free in msm_bus_floor_vote_context() can potentially occur in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2017-15842 | Buffer might get used after it gets freed due to unlocking the mutex before freeing the buffer in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel. |
| CVE-2017-15837 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, a policy for the packet pattern attribute NL80211_PKTPAT_OFFSET is not defined which can lead to a buffer over-read in nla_get_u32(). |
| CVE-2017-15836 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, if the firmware sends a service ready event to the host with a large number in the num_hw_modes or num_phy, then it could result in an integer overflow which may potentially lead to a buffer overflow. |
| CVE-2017-15835 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, While processing the RIC Data Descriptor IE in an artificially crafted 802.11 frame with IE length more than 255, an infinite loop may potentially occur resulting in a denial of service. |
| CVE-2017-15834 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, race condition in diag_dbgfs_read_dcistats(), while accessing diag_dbgfs_dci_data_index, causes potential heap overflow. |
| CVE-2017-15833 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, untrusted pointer dereference in update_userspace_power() function in power leads to information exposure. |
| CVE-2017-15831 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the function wma_ndp_end_indication_event_handler(), there is no input validation check on a event_info value coming from firmware, which can cause an integer overflow and then leads to potential heap overwrite. |
| CVE-2017-15830 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper ch_list array index initialization in function sme_set_plm_request() causes potential buffer overflow. |
| CVE-2017-15829 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a race condition exists in a GPU Driver which can potentially lead to a Use After Free condition. |
| CVE-2017-15828 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while accessing the keystore in LK, an integer overflow vulnerability exists which may potentially lead to a buffer overflow. |
| CVE-2017-15825 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while processing a gpt update, an out of bounds memory access may potentially occur. |
| CVE-2017-15824 | In Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05, the function UpdateDeviceStatus() writes a local stack buffer without initialization to flash memory using WriteToPartition() which may potentially leak memory. |
| CVE-2017-15822 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, while processing a 802.11 management frame, a buffer overflow may potentially occur. |
| CVE-2017-15821 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the function wma_p2p_noa_event_handler(), there is no bound check on a value coming from firmware which can potentially lead to a buffer overwrite. |
| CVE-2017-15820 | In all Qualcomm products with Android releases from CAF using the Linux kernel, in a KGSL IOCTL handler, a Use After Free Condition can potentially occur. |
| CVE-2017-15818 | In all android releases (Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while loading a user application in qseecom, an integer overflow could potentially occur if the application partition size is rounded up to page_size. |
| CVE-2017-15817 | In all Qualcomm products with Android releases from CAF using the Linux kernel, when an access point sends a challenge text greater than 128 bytes, the host driver is unable to validate this potentially leading to authentication failure. |
| CVE-2017-15815 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a potential buffer overflow can happen when processing any 802.11 MGMT frames like Auth frame in limProcessAuthFrame. |
| CVE-2017-15814 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in msm_flash_subdev_do_ioctl of drivers/media/platform/msm/camera_v2/sensor/flash/msm_flash.c, there is a possible out of bounds read if flash_data.cfg_type is CFG_FLASH_INIT due to improper input validation. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2017-15813 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a buffer overflow can occur while reading firmware logs. |
| CVE-2017-15649 | net/packet/af_packet.c in the Linux kernel before 4.13.6 allows local users to gain privileges via crafted system calls that trigger mishandling of packet_fanout data structures, because of a race condition (involving fanout_add and packet_do_bind) that leads to a use-after-free, a different vulnerability than CVE-2017-6346. |
| CVE-2017-15537 | The x86/fpu (Floating Point Unit) subsystem in the Linux kernel before 4.13.5, when a processor supports the xsave feature but not the xsaves feature, does not correctly handle attempts to set reserved bits in the xstate header via the ptrace() or rt_sigreturn() system call, allowing local users to read the FPU registers of other processes on the system, related to arch/x86/kernel/fpu/regset.c and arch/x86/kernel/fpu/signal.c. |
| CVE-2017-15306 | The kvm_vm_ioctl_check_extension function in arch/powerpc/kvm/powerpc.c in the Linux kernel before 4.13.11 allows local users to cause a denial of service (NULL pointer dereference and system crash) via a KVM_CHECK_EXTENSION KVM_CAP_PPC_HTM ioctl call to /dev/kvm. |
| CVE-2017-15299 | The KEYS subsystem in the Linux kernel through 4.13.7 mishandles use of add_key for a key that already exists but is uninstantiated, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a crafted system call. |
| CVE-2017-15274 | security/keys/keyctl.c in the Linux kernel before 4.11.5 does not consider the case of a NULL payload in conjunction with a nonzero length value, which allows local users to cause a denial of service (NULL pointer dereference and OOPS) via a crafted add_key or keyctl system call, a different vulnerability than CVE-2017-12192. |
| CVE-2017-15265 | Race condition in the ALSA subsystem in the Linux kernel before 4.13.8 allows local users to cause a denial of service (use-after-free) or possibly have unspecified other impact via crafted /dev/snd/seq ioctl calls, related to sound/core/seq/seq_clientmgr.c and sound/core/seq/seq_ports.c. |
| CVE-2017-15129 | A use-after-free vulnerability was found in network namespaces code affecting the Linux kernel before 4.14.11. The function get_net_ns_by_id() in net/core/net_namespace.c does not check for the net::count value after it has found a peer network in netns_ids idr, which could lead to double free and memory corruption. This vulnerability could allow an unprivileged local user to induce kernel memory corruption on the system, leading to a crash. Due to the nature of the flaw, privilege escalation cannot be fully ruled out, although it is thought to be unlikely. |
| CVE-2017-15128 | A flaw was found in the hugetlb_mcopy_atomic_pte function in mm/hugetlb.c in the Linux kernel before 4.13.12. A lack of size check could cause a denial of service (BUG). |
| CVE-2017-15127 | A flaw was found in the hugetlb_mcopy_atomic_pte function in mm/hugetlb.c in the Linux kernel before 4.13. A superfluous implicit page unlock for VM_SHARED hugetlbfs mapping could trigger a local denial of service (BUG). |
| CVE-2017-15126 | A use-after-free flaw was found in fs/userfaultfd.c in the Linux kernel before 4.13.6. The issue is related to the handling of fork failure when dealing with event messages. Failure to fork correctly can lead to a situation where a fork event will be removed from an already freed list of events with userfaultfd_ctx_put(). |
| CVE-2017-15116 | The rngapi_reset function in crypto/rng.c in the Linux kernel before 4.2 allows attackers to cause a denial of service (NULL pointer dereference). |
| CVE-2017-15115 | The sctp_do_peeloff function in net/sctp/socket.c in the Linux kernel before 4.14 does not check whether the intended netns is used in a peel-off action, which allows local users to cause a denial of service (use-after-free and system crash) or possibly have unspecified other impact via crafted system calls. |
| CVE-2017-15102 | The tower_probe function in drivers/usb/misc/legousbtower.c in the Linux kernel before 4.8.1 allows local users (who are physically proximate for inserting a crafted USB device) to gain privileges by leveraging a write-what-where condition that occurs after a race condition and a NULL pointer dereference. |
| CVE-2017-14991 | The sg_ioctl function in drivers/scsi/sg.c in the Linux kernel before 4.13.4 allows local users to obtain sensitive information from uninitialized kernel heap-memory locations via an SG_GET_REQUEST_TABLE ioctl call for /dev/sg0. |
| CVE-2017-14954 | The waitid implementation in kernel/exit.c in the Linux kernel through 4.13.4 accesses rusage data structures in unintended cases, which allows local users to obtain sensitive information, and bypass the KASLR protection mechanism, via a crafted system call. |
| CVE-2017-14918 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the GPS location wireless interface, a Use After Free condition can occur. |
| CVE-2017-14917 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, buffer sizes in the message passing interface are not properly validated. |
| CVE-2017-14916 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, buffer sizes in the message passing interface are not properly validated. |
| CVE-2017-14914 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, handles in the global client structure can become stale. |
| CVE-2017-14909 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a count value that is read from a file is not properly validated. |
| CVE-2017-14908 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, the SafeSwitch test application does not properly validate the number of blocks to verify. |
| CVE-2017-14907 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, cryptographic strength is reduced while deriving disk encryption key. |
| CVE-2017-14905 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing a specially crafted cfg80211 vendor command, a buffer over-read can occur. |
| CVE-2017-14904 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a crafted binder request can cause an arbitrary unmap in MediaServer. |
| CVE-2017-14903 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing the SENDACTIONFRAME IOCTL, a buffer over-read can occur if the payload length is less than 7. |
| CVE-2017-14902 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, due to a race condition in the GLink kernel driver, a Use After Free condition can potentially occur. |
| CVE-2017-14901 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing the QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE vendor command, in which attribute QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE contains fewer than 1 byte, a buffer overrun occurs. |
| CVE-2017-14900 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing the QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI vendor command, in which attribute QCA_WLAN_VENDOR_ATTR_MAC_ADDR contains fewer than 6 bytes, a buffer overrun occurs. |
| CVE-2017-14899 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing the QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE_DECR_DB vendor command, in which attribute QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB contains fewer than 1 byte, a buffer overrun occurs. |
| CVE-2017-14898 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing the QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE vendor command, in which attribute QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE contains fewer than 1 byte, a buffer overrun occurs. |
| CVE-2017-14897 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while handling the QSEOS_RPMB_CHECK_PROV_STATUS_COMMAND, a userspace buffer is directly accessed in kernel space. |
| CVE-2017-14896 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, there is a memory allocation without a length field validation in the mobicore driver which can result in an undersize buffer allocation. Ultimately this can result in a kernel memory overwrite. |
| CVE-2017-14895 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, after a subsystem reset, iwpriv is not giving correct information. |
| CVE-2017-14894 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, in wma_vdev_start_resp_handler(), vdev id is received from firmware as part of WMI_VDEV_START_RESP_EVENTID. This vdev id can be greater than max bssid stored in wma handle and this would result in buffer overwrite while accessing wma_handle->interfaces[vdev_id]. |
| CVE-2017-14893 | While flashing meta image, a buffer over-read may potentially occur when the image size is smaller than the image header size or is smaller than the image header size + total image header entry in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2017-14890 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, in the processing of an SWBA event, the vdev_map value is not properly validated leading to a potential buffer overwrite in function wma_send_bcn_buf_ll(). |
| CVE-2017-14889 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, due to the lack of a range check on the array index into the WMI descriptor pool, arbitrary address execution may potentially occur in the process mgmt completion handler. |
| CVE-2017-14888 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Userspace can pass IEs to the host driver and if multiple append commands are received, then the integer variable that stores the length can overflow and the subsequent copy of the IE data may potentially lead to a heap buffer overflow. |
| CVE-2017-14887 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the processing of messages of type eWNI_SME_MODIFY_ADDITIONAL_IES, an integer overflow leading to heap buffer overflow may potentially occur. |
| CVE-2017-14885 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, wma_unified_link_peer_stats_event_handler function has a variable num_rates which represents the sum of all the peer_stats->num_rates. The current behavior in this function is to validate only the num_rates of the first peer stats (peer_stats->num_rates) against WMA_SVC_MSG_MAX_SIZE, but not the sum of all the peer's num_rates (num_rates) which may lead to a buffer overflow when the firmware buffer is copied in to the allocated buffer (peer_stats) as the size for the memory allocation - link_stats_results_size is based on num_rates. |
| CVE-2017-14884 | In all Qualcomm products with Android releases from CAF using the Linux kernel, due to lack of bounds checking on the variable "data_len" from the function WLANQCMBR_McProcessMsg, a buffer overflow may potentially occur in WLANFTM_McProcessMsg. |
| CVE-2017-14882 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing VENDOR specific action frame in the function lim_process_action_vendor_specific(), a comparison is performed with the incoming action frame body without validating if the action frame body received is of valid length, potentially leading to an out-of-bounds access. |
| CVE-2017-14880 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, while IPA WAN-driver is processing multiple requests from modem/user-space module, the global variable "num_q6_rule" does not have a mutex lock and thus can be accessed and modified by multiple threads. |
| CVE-2017-14879 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, by calling an IPA ioctl and searching for routing/filer/hdr rule handle from ipa_idr pointer using ipa_idr_find() function, the wrong structure pointer can be returned resulting in a slab out of bound access in the IPA driver. |
| CVE-2017-14878 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a length variable which is used to copy data has a size of only 8 bits and can be exceeded resulting in a denial of service. |
| CVE-2017-14873 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the pp_pgc_get_config() graphics driver function, a kernel memory overwrite can potentially occur. |
| CVE-2017-14872 | While flashing a meta image, a buffer over-read can potentially occur when the number of images are out of the maximum range of 32 in Android releases from CAF using the linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-06-05. |
| CVE-2017-14870 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while updating the recovery message for eMMC devices, 1088 bytes of stack memory can potentially be leaked. |
| CVE-2017-14869 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while performing update of FOTA partition, uninitialized data can be pushed to storage. |
| CVE-2017-14497 | The tpacket_rcv function in net/packet/af_packet.c in the Linux kernel before 4.13 mishandles vnet headers, which might allow local users to cause a denial of service (buffer overflow, and disk and memory corruption) or possibly have unspecified other impact via crafted system calls. |
| CVE-2017-14489 | The iscsi_if_rx function in drivers/scsi/scsi_transport_iscsi.c in the Linux kernel through 4.13.2 allows local users to cause a denial of service (panic) by leveraging incorrect length validation. |
| CVE-2017-14340 | The XFS_IS_REALTIME_INODE macro in fs/xfs/xfs_linux.h in the Linux kernel before 4.13.2 does not verify that a filesystem has a realtime device, which allows local users to cause a denial of service (NULL pointer dereference and OOPS) via vectors related to setting an RHINHERIT flag on a directory. |
| CVE-2017-14156 | The atyfb_ioctl function in drivers/video/fbdev/aty/atyfb_base.c in the Linux kernel through 4.12.10 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel stack memory by reading locations associated with padding bytes. |
| CVE-2017-14140 | The move_pages system call in mm/migrate.c in the Linux kernel before 4.12.9 doesn't check the effective uid of the target process, enabling a local attacker to learn the memory layout of a setuid executable despite ASLR. |
| CVE-2017-14106 | The tcp_disconnect function in net/ipv4/tcp.c in the Linux kernel before 4.12 allows local users to cause a denial of service (__tcp_select_window divide-by-zero error and system crash) by triggering a disconnect within a certain tcp_recvmsg code path. |
| CVE-2017-14051 | An integer overflow in the qla2x00_sysfs_write_optrom_ctl function in drivers/scsi/qla2xxx/qla_attr.c in the Linux kernel through 4.12.10 allows local users to cause a denial of service (memory corruption and system crash) by leveraging root access. |
| CVE-2017-13715 | The __skb_flow_dissect function in net/core/flow_dissector.c in the Linux kernel before 4.3 does not ensure that n_proto, ip_proto, and thoff are initialized, which allows remote attackers to cause a denial of service (system crash) or possibly execute arbitrary code via a single crafted MPLS packet. |
| CVE-2017-13695 | The acpi_ns_evaluate() function in drivers/acpi/acpica/nseval.c in the Linux kernel through 4.12.9 does not flush the operand cache and causes a kernel stack dump, which allows local users to obtain sensitive information from kernel memory and bypass the KASLR protection mechanism (in the kernel through 4.9) via a crafted ACPI table. |
| CVE-2017-13694 | The acpi_ps_complete_final_op() function in drivers/acpi/acpica/psobject.c in the Linux kernel through 4.12.9 does not flush the node and node_ext caches and causes a kernel stack dump, which allows local users to obtain sensitive information from kernel memory and bypass the KASLR protection mechanism (in the kernel through 4.9) via a crafted ACPI table. |
| CVE-2017-13693 | The acpi_ds_create_operands() function in drivers/acpi/acpica/dsutils.c in the Linux kernel through 4.12.9 does not flush the operand cache and causes a kernel stack dump, which allows local users to obtain sensitive information from kernel memory and bypass the KASLR protection mechanism (in the kernel through 4.9) via a crafted ACPI table. |
| CVE-2017-13686 | net/ipv4/route.c in the Linux kernel 4.13-rc1 through 4.13-rc6 is too late to check for a NULL fi field when RTM_F_FIB_MATCH is set, which allows local users to cause a denial of service (NULL pointer dereference) or possibly have unspecified other impact via crafted system calls. NOTE: this does not affect any stable release. |
| CVE-2017-13305 | A information disclosure vulnerability in the Upstream kernel encrypted-keys. Product: Android. Versions: Android kernel. Android ID: A-70526974. |
| CVE-2017-13166 | An elevation of privilege vulnerability in the kernel v4l2 video driver. Product: Android. Versions: Android kernel. Android ID A-34624167. |
| CVE-2017-12762 | In /drivers/isdn/i4l/isdn_net.c: A user-controlled buffer is copied into a local buffer of constant size using strcpy without a length check which can cause a buffer overflow. This affects the Linux kernel 4.9-stable tree, 4.12-stable tree, 3.18-stable tree, and 4.4-stable tree. |
| CVE-2017-12193 | The assoc_array_insert_into_terminal_node function in lib/assoc_array.c in the Linux kernel before 4.13.11 mishandles node splitting, which allows local users to cause a denial of service (NULL pointer dereference and panic) via a crafted application, as demonstrated by the keyring key type, and key addition and link creation operations. |
| CVE-2017-12192 | The keyctl_read_key function in security/keys/keyctl.c in the Key Management subcomponent in the Linux kernel before 4.13.5 does not properly consider that a key may be possessed but negatively instantiated, which allows local users to cause a denial of service (OOPS and system crash) via a crafted KEYCTL_READ operation. |
| CVE-2017-12190 | The bio_map_user_iov and bio_unmap_user functions in block/bio.c in the Linux kernel before 4.13.8 do unbalanced refcounting when a SCSI I/O vector has small consecutive buffers belonging to the same page. The bio_add_pc_page function merges them into one, but the page reference is never dropped. This causes a memory leak and possible system lockup (exploitable against the host OS by a guest OS user, if a SCSI disk is passed through to a virtual machine) due to an out-of-memory condition. |
| CVE-2017-12188 | arch/x86/kvm/mmu.c in the Linux kernel through 4.13.5, when nested virtualisation is used, does not properly traverse guest pagetable entries to resolve a guest virtual address, which allows L1 guest OS users to execute arbitrary code on the host OS or cause a denial of service (incorrect index during page walking, and host OS crash), aka an "MMU potential stack buffer overrun." |
| CVE-2017-12168 | The access_pmu_evcntr function in arch/arm64/kvm/sys_regs.c in the Linux kernel before 4.8.11 allows privileged KVM guest OS users to cause a denial of service (assertion failure and host OS crash) by accessing the Performance Monitors Cycle Count Register (PMCCNTR). |
| CVE-2017-12154 | The prepare_vmcs02 function in arch/x86/kvm/vmx.c in the Linux kernel through 4.13.3 does not ensure that the "CR8-load exiting" and "CR8-store exiting" L0 vmcs02 controls exist in cases where L1 omits the "use TPR shadow" vmcs12 control, which allows KVM L2 guest OS users to obtain read and write access to the hardware CR8 register. |
| CVE-2017-12153 | A security flaw was discovered in the nl80211_set_rekey_data() function in net/wireless/nl80211.c in the Linux kernel through 4.13.3. This function does not check whether the required attributes are present in a Netlink request. This request can be issued by a user with the CAP_NET_ADMIN capability and may result in a NULL pointer dereference and system crash. |
| CVE-2017-12146 | The driver_override implementation in drivers/base/platform.c in the Linux kernel before 4.12.1 allows local users to gain privileges by leveraging a race condition between a read operation and a store operation that involve different overrides. |
| CVE-2017-11600 | net/xfrm/xfrm_policy.c in the Linux kernel through 4.12.3, when CONFIG_XFRM_MIGRATE is enabled, does not ensure that the dir value of xfrm_userpolicy_id is XFRM_POLICY_MAX or less, which allows local users to cause a denial of service (out-of-bounds access) or possibly have unspecified other impact via an XFRM_MSG_MIGRATE xfrm Netlink message. |
| CVE-2017-11473 | Buffer overflow in the mp_override_legacy_irq() function in arch/x86/kernel/acpi/boot.c in the Linux kernel through 3.2 allows local users to gain privileges via a crafted ACPI table. |
| CVE-2017-11472 | The acpi_ns_terminate() function in drivers/acpi/acpica/nsutils.c in the Linux kernel before 4.12 does not flush the operand cache and causes a kernel stack dump, which allows local users to obtain sensitive information from kernel memory and bypass the KASLR protection mechanism (in the kernel through 4.9) via a crafted ACPI table. |
| CVE-2017-11176 | The mq_notify function in the Linux kernel through 4.11.9 does not set the sock pointer to NULL upon entry into the retry logic. During a user-space close of a Netlink socket, it allows attackers to cause a denial of service (use-after-free) or possibly have unspecified other impact. |
| CVE-2017-11093 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, buffer Over-read in Display due to the lack of an upper-bound validation when reading "num_of_cea_blocks" from the untrusted source (EDID), kernel memory can be exposed. |
| CVE-2017-11092 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the KGSL driver function kgsl_ioctl_gpu_command, a Use After Free condition can potentially occur. |
| CVE-2017-11091 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the function mdss_rotator_ioctl in the driver /dev/mdss_rotator, a Use-After-Free condition can potentially occur due to a fence being installed too early. |
| CVE-2017-11090 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a buffer overread is observed in __wlan_hdd_cfg80211_set_pmksa when user space application sends PMKID of size less than WLAN_PMKID_LEN bytes. |
| CVE-2017-11089 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a buffer overread is observed in nl80211_set_station when user space application sends attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE with data of size less than 4 bytes |
| CVE-2017-11085 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, an integer overflow leading to a buffer overflow due to improper bound checking in msm_audio_effects_virtualizer_handler, file msm-audio-effects-q6-v2.c |
| CVE-2017-11082 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, due to a race condition in a firmware loading routine, a buffer overflow could potentially occur if multiple user space threads try to update the WLAN firmware file through sysfs. |
| CVE-2017-11081 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, there is a potential buffer overflow vulnerability in hdd_parse_setrmcenable_command and hdd_parse_setrmcactionperiod_command APIs as buffers defined in this API can hold maximum 32 bytes but data more than 32 bytes can get copied. |
| CVE-2017-11080 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing a user supplied sparse image, a buffer overflow vulnerability could occur if the sparse header block size is equal to 4294967296. |
| CVE-2017-11079 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing sparse image, uninitialized heap memory can potentially be flashed due to the lack of validation of sparse image block header size. |
| CVE-2017-11078 | In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, while processing the boot image header, an out of bounds read can occur in boot. |
| CVE-2017-11075 | In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, if cmd_pkt and reg_pkt are called from different userspace threads, a use after free condition can potentially occur in wdsp_glink_write(). |
| CVE-2017-11074 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, there is an obsolete set/reset ssid hotlist API. |
| CVE-2017-11073 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, the qcacld pktlog allows mapping memory via /proc/ath_pktlog/cld to user space. |
| CVE-2017-11072 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while calculating CRC for GPT header fields with partition entries greater than 16384 buffer overflow occurs. |
| CVE-2017-11069 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, manipulation of SafeSwitch Image data can result in Heap overflow. |
| CVE-2017-11067 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, the Athdiag procfs entry does not have a proper address sanity check which may potentially lead to the use of an out-of-range pointer offset. |
| CVE-2017-11066 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while flashing ubi image an uninitialized memory could be accessed. |
| CVE-2017-11064 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a buffer overread is observed during processing of ACA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_PASSPOINT_LIST and QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_LIST cfg80211 vendor commands in __wlan_hdd_cfg80211_set_passpoint_list and hdd_extscan_passpoint_fill_network_list function respectively. Android ID: A-36815952. References: QC-CR#2054770, QC-CR#2058447, QC-CR#2066628, QC-CR#2087785 |
| CVE-2017-11063 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, as a result of a race condition between two userspace processes that interact with the driver concurrently, a null pointer dereference can potentially occur. |
| CVE-2017-11062 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, currently attributes are not validated in __wlan_hdd_cfg80211_do_acs which can potentially lead to a buffer overread. |
| CVE-2017-11061 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing cfg80211 vendor sub command QCA_NL80211_VENDOR_SUBCMD_ROAM, a buffer over-read can occur. |
| CVE-2017-11060 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a buffer overread is observed during processing of ACA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_PASSPOINT_LIST and QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_LIST cfg80211 vendor commands in __wlan_hdd_cfg80211_set_passpoint_list and hdd_extscan_passpoint_fill_network_list function respectively. Android ID: A-36817548. References: QC-CR#2058447, QC-CR#2054770. |
| CVE-2017-11059 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, setting the HMAC key by different threads during SHA operations may potentially lead to a buffer overflow. |
| CVE-2017-11058 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing a specially crafted cfg80211 vendor command, a buffer over-read can occur. |
| CVE-2017-11057 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in compatibility mode, flash_data from 64-bit userspace may cause disclosure of kernel memory or a fault due to using a userspace-provided address. |
| CVE-2017-11056 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while doing sha and cipher operations, a userspace buffer is directly accessed in kernel space potentially leading to a page fault. |
| CVE-2017-11055 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing a specially crafted QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION cfg80211 vendor command, a buffer over-read can occur. |
| CVE-2017-11054 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing a specially crafted cfg80211 vendor command, a buffer over-read can occur. |
| CVE-2017-11053 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, when qos map set IE of length less than 16 is received in association response or in qos map configure action frame, a buffer overflow can potentially occur in ConvertQosMapsetFrame(). |
| CVE-2017-11052 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing a specially crafted QCA_NL80211_VENDOR_SUBCMD_NDP cfg80211 vendor command a buffer over-read can occur. |
| CVE-2017-11051 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, information disclosure is possible in function __wlan_hdd_cfg80211_testmode since buffer hb_params is not initialized to zero. |
| CVE-2017-11050 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, when the pktlogconf tool gives a pktlog buffer of size less than the minimal possible source data size in the host driver, a buffer overflow can potentially occur. |
| CVE-2017-11049 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in a video driver, a race condition exists which can potentially lead to a buffer overflow. |
| CVE-2017-11048 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in a display driver function, a Use After Free condition can occur. |
| CVE-2017-11047 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in a graphics driver ioctl handler, the lack of copy_from_user() function calls may result in writes to kernel memory. |
| CVE-2017-11046 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, when an audio driver ioctl handler is called, a kernel out-of-bounds write can potentially occur. |
| CVE-2017-11045 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in a camera driver function, a race condition exists which can lead to a Use After Free condition. |
| CVE-2017-11044 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in a KGSL driver function, a race condition exists which can lead to a Use After Free condition. |
| CVE-2017-11043 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in a WiFI driver function, an integer overflow leading to heap buffer overflow may potentially occur. |
| CVE-2017-11042 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, ImsService and the IQtiImsExt AIDL APIs are not subject to access control. |
| CVE-2017-11041 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an output buffer is accessed in one thread and can be potentially freed in another. |
| CVE-2017-11040 | In all Qualcomm products with Android releases from CAF using the Linux kernel, when reading from sysfs nodes, one can read more information than it is allowed to. |
| CVE-2017-11038 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing the boot image header, range checks can be bypassed by supplying different versions of the header at the time of check and use. |
| CVE-2017-11035 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, possible buffer overflow or information leak in the functions "sme_set_ft_ies" and "csr_roam_issue_ft_preauth_req" due to incorrect initialization of WEXT callbacks and lack of the checks for buffer size. |
| CVE-2017-11033 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the coresight-tmc driver, a simultaneous read and enable of the ETR device after changing the buffer size may result in a Use After Free condition of the previous buffer. |
| CVE-2017-11032 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a double free can occur when kmalloc fails to allocate memory for pointers resp/req in the service-locator driver function service_locator_send_msg(). |
| CVE-2017-11031 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, the VIDIOC_G_SDE_ROTATOR_FENCE ioctl command can be used to cause a Use After Free condition. |
| CVE-2017-11030 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the HDMI video driver function hdmi_edid_sysfs_rda_res_info(), userspace can perform an arbitrary write into kernel memory. |
| CVE-2017-11029 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, camera application triggers "user-memory-access" issue as the Camera CPP module Linux driver directly accesses the application provided buffer, which resides in user space. An unchecked userspace value (ioctl_ptr->len) is used to copy contents to a kernel buffer which can lead to kernel buffer overflow. |
| CVE-2017-11028 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the ISP Camera driver, the contents of an arbitrary kernel address can be leaked to userspace by the function msm_isp_get_stream_common_data(). |
| CVE-2017-11027 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while flashing UBI image, size is not validated for being smaller than minimum header size causing unintialized data access vulnerability. |
| CVE-2017-11026 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while flashing FRP partition using reference FRP unlock, authentication method can be compromised for static keys. |
| CVE-2017-11025 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, due to a race condition in the function audio_effects_shared_ioctl(), memory corruption can occur. |
| CVE-2017-11024 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a race condition in the rmnet USB control driver can potentially lead to a Use After Free condition. |
| CVE-2017-11023 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, there is a possibility of out-of-bound buffer accesses due to no synchronization in accessing global variables by multiple threads. |
| CVE-2017-11022 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, the probe requests originated from user's phone contains the information elements which specifies the supported wifi features. This shall impact the user's privacy if someone sniffs the probe requests originated by this DUT. Hence, control the presence of information elements using ini file. |
| CVE-2017-11019 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, the fd allocated during the get_metadata was not closed even though the buffer allocated to the fd was freed. This resulted in a failure during exit sequence. |
| CVE-2017-11018 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, array access out of bounds may occur in the camera driver in the kernel |
| CVE-2017-11017 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while flashing a specially crafted UBI image, it is possible to corrupt memory, or access uninitialized memory. |
| CVE-2017-11016 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, when memory allocation fails while creating a calibration block in create_cal_block stale pointers are left uncleared. |
| CVE-2017-11015 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, currently, the value of SIR_MAC_AUTH_CHALLENGE_LENGTH is set to 128 which may result in buffer overflow since the frame parser allows challenge text of length up to 253 bytes, but the driver can not handle challenge text larger than 128 bytes. |
| CVE-2017-11014 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while parsing a Measurement Request IE in a Roam Neighbor Action Report, a buffer overflow can occur. |
| CVE-2017-11013 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, countOffset (in function UnpackCore) is increased for each loop, while there is no boundary check against "pIe->arraybound". |
| CVE-2017-11012 | In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, when processing a specially crafted QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST cfg80211 vendor command a stack-based buffer overflow can occur. |
| CVE-2017-11007 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, there is a possibility of stack corruption due to buffer overflow of Partition name while converting ascii string to unicode string in function HandleMetaImgFlash. |
| CVE-2017-11006 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a Use After Free condition can occur during positioning. |
| CVE-2017-11005 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a Use After Free condition can occur during a deinitialization path. |
| CVE-2017-11003 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while updating a firmware image, data is read from flash into RAM without checking that the data fits into allotted RAM size. |
| CVE-2017-11002 | In all Qualcomm products with Android releases from CAF using the Linux kernel, while processing a vendor sub-command, a buffer over-read can occur. |
| CVE-2017-11001 | In all Qualcomm products with Android releases from CAF using the Linux kernel, the length of the MAC address is not checked which may cause out of bounds read. |
| CVE-2017-11000 | In all Qualcomm products with Android releases from CAF using the Linux kernel, in an ISP Camera kernel driver function, an incorrect bounds check may potentially lead to an out-of-bounds write. |
| CVE-2017-10999 | In all Qualcomm products with Android releases from CAF using the Linux kernel, concurrent calls into ioctl RMNET_IOCTL_ADD_MUX_CHANNEL in ipa wan driver may lead to memory corruption due to missing locks. |
| CVE-2017-10998 | In all Qualcomm products with Android releases from CAF using the Linux kernel, in audio_aio_ion_lookup_vaddr, the buffer length, which is user input, ends up being used to validate if the buffer is fully within the valid region. If the buffer length is large enough then the address + length operation could overflow and produce a result far below the valid region. |
| CVE-2017-10997 | In all Qualcomm products with Android releases from CAF using the Linux kernel, using a debugfs node, a write to a PCIe register can cause corruption of kernel memory. |
| CVE-2017-10996 | In all Qualcomm products with Android releases from CAF using the Linux kernel, out of bounds access is possible in c_show(), due to compat_hwcap_str[] not being NULL-terminated. This error is not fatal, however the device might crash/reboot with memory violation/out of bounds access. |
| CVE-2017-10911 | The make_response function in drivers/block/xen-blkback/blkback.c in the Linux kernel before 4.11.8 allows guest OS users to obtain sensitive information from host OS (or other guest OS) kernel memory by leveraging the copying of uninitialized padding fields in Xen block-interface response structures, aka XSA-216. |
| CVE-2017-10810 | Memory leak in the virtio_gpu_object_create function in drivers/gpu/drm/virtio/virtgpu_object.c in the Linux kernel through 4.11.8 allows attackers to cause a denial of service (memory consumption) by triggering object-initialization failures. |
| CVE-2017-10663 | The sanity_check_ckpt function in fs/f2fs/super.c in the Linux kernel before 4.12.4 does not validate the blkoff and segno arrays, which allows local users to gain privileges via unspecified vectors. |
| CVE-2017-10662 | The sanity_check_raw_super function in fs/f2fs/super.c in the Linux kernel before 4.11.1 does not validate the segment count, which allows local users to gain privileges via unspecified vectors. |
| CVE-2017-10661 | Race condition in fs/timerfd.c in the Linux kernel before 4.10.15 allows local users to gain privileges or cause a denial of service (list corruption or use-after-free) via simultaneous file-descriptor operations that leverage improper might_cancel queueing. |
| CVE-2017-1000410 | The Linux kernel version 3.3-rc1 and later is affected by a vulnerability lies in the processing of incoming L2CAP commands - ConfigRequest, and ConfigResponse messages. This info leak is a result of uninitialized stack variables that may be returned to an attacker in their uninitialized state. By manipulating the code flows that precede the handling of these configuration messages, an attacker can also gain some control over which data will be held in the uninitialized stack variables. This can allow him to bypass KASLR, and stack canaries protection - as both pointers and stack canaries may be leaked in this manner. Combining this vulnerability (for example) with the previously disclosed RCE vulnerability in L2CAP configuration parsing (CVE-2017-1000251) may allow an attacker to exploit the RCE against kernels which were built with the above mitigations. These are the specifics of this vulnerability: In the function l2cap_parse_conf_rsp and in the function l2cap_parse_conf_req the following variable is declared without initialization: struct l2cap_conf_efs efs; In addition, when parsing input configuration parameters in both of these functions, the switch case for handling EFS elements may skip the memcpy call that will write to the efs variable: ... case L2CAP_CONF_EFS: if (olen == sizeof(efs)) memcpy(&efs, (void *)val, olen); ... The olen in the above if is attacker controlled, and regardless of that if, in both of these functions the efs variable would eventually be added to the outgoing configuration request that is being built: l2cap_add_conf_opt(&ptr, L2CAP_CONF_EFS, sizeof(efs), (unsigned long) &efs); So by sending a configuration request, or response, that contains an L2CAP_CONF_EFS element, but with an element length that is not sizeof(efs) - the memcpy to the uninitialized efs variable can be avoided, and the uninitialized variable would be returned to the attacker (16 bytes). |
| CVE-2017-1000407 | The Linux Kernel 2.6.32 and later are affected by a denial of service, by flooding the diagnostic port 0x80 an exception can be triggered leading to a kernel panic. |
| CVE-2017-1000405 | The Linux Kernel versions 2.6.38 through 4.14 have a problematic use of pmd_mkdirty() in the touch_pmd() function inside the THP implementation. touch_pmd() can be reached by get_user_pages(). In such case, the pmd will become dirty. This scenario breaks the new can_follow_write_pmd()'s logic - pmd can become dirty without going through a COW cycle. This bug is not as severe as the original "Dirty cow" because an ext4 file (or any other regular file) cannot be mapped using THP. Nevertheless, it does allow us to overwrite read-only huge pages. For example, the zero huge page and sealed shmem files can be overwritten (since their mapping can be populated using THP). Note that after the first write page-fault to the zero page, it will be replaced with a new fresh (and zeroed) thp. |
| CVE-2017-1000380 | sound/core/timer.c in the Linux kernel before 4.11.5 is vulnerable to a data race in the ALSA /dev/snd/timer driver resulting in local users being able to read information belonging to other users, i.e., uninitialized memory contents may be disclosed when a read and an ioctl happen at the same time. |
| CVE-2017-1000379 | The Linux Kernel running on AMD64 systems will sometimes map the contents of PIE executable, the heap or ld.so to where the stack is mapped allowing attackers to more easily manipulate the stack. Linux Kernel version 4.11.5 is affected. |
| CVE-2017-1000377 | An issue was discovered in the size of the default stack guard page on PAX Linux (originally from GRSecurity but shipped by other Linux vendors), specifically the default stack guard page is not sufficiently large and can be "jumped" over (the stack guard page is bypassed), this affects PAX Linux Kernel versions as of June 19, 2017 (specific version information is not available at this time). |
| CVE-2017-1000371 | The offset2lib patch as used by the Linux Kernel contains a vulnerability, if RLIMIT_STACK is set to RLIM_INFINITY and 1 Gigabyte of memory is allocated (the maximum under the 1/4 restriction) then the stack will be grown down to 0x80000000, and as the PIE binary is mapped above 0x80000000 the minimum distance between the end of the PIE binary's read-write segment and the start of the stack becomes small enough that the stack guard page can be jumped over by an attacker. This affects Linux Kernel version 4.11.5. This is a different issue than CVE-2017-1000370 and CVE-2017-1000365. This issue appears to be limited to i386 based systems. |
| CVE-2017-1000370 | The offset2lib patch as used in the Linux Kernel contains a vulnerability that allows a PIE binary to be execve()'ed with 1GB of arguments or environmental strings then the stack occupies the address 0x80000000 and the PIE binary is mapped above 0x40000000 nullifying the protection of the offset2lib patch. This affects Linux Kernel version 4.11.5 and earlier. This is a different issue than CVE-2017-1000371. This issue appears to be limited to i386 based systems. |
| CVE-2017-1000365 | The Linux Kernel imposes a size restriction on the arguments and environmental strings passed through RLIMIT_STACK/RLIM_INFINITY (1/4 of the size), but does not take the argument and environment pointers into account, which allows attackers to bypass this limitation. This affects Linux Kernel versions 4.11.5 and earlier. It appears that this feature was introduced in the Linux Kernel version 2.6.23. |
| CVE-2017-1000364 | An issue was discovered in the size of the stack guard page on Linux, specifically a 4k stack guard page is not sufficiently large and can be "jumped" over (the stack guard page is bypassed), this affects Linux Kernel versions 4.11.5 and earlier (the stackguard page was introduced in 2010). |
| CVE-2017-1000363 | Linux drivers/char/lp.c Out-of-Bounds Write. Due to a missing bounds check, and the fact that parport_ptr integer is static, a 'secure boot' kernel command line adversary (can happen due to bootloader vulns, e.g. Google Nexus 6's CVE-2016-10277, where due to a vulnerability the adversary has partial control over the command line) can overflow the parport_nr array in the following code, by appending many (>LP_NO) 'lp=none' arguments to the command line. |
| CVE-2017-1000255 | On Linux running on PowerPC hardware (Power8 or later) a user process can craft a signal frame and then do a sigreturn so that the kernel will take an exception (interrupt), and use the r1 value *from the signal frame* as the kernel stack pointer. As part of the exception entry the content of the signal frame is written to the kernel stack, allowing an attacker to overwrite arbitrary locations with arbitrary values. The exception handling does produce an oops, and a panic if panic_on_oops=1, but only after kernel memory has been over written. This flaw was introduced in commit: "5d176f751ee3 (powerpc: tm: Enable transactional memory (TM) lazily for userspace)" which was merged upstream into v4.9-rc1. Please note that kernels built with CONFIG_PPC_TRANSACTIONAL_MEM=n are not vulnerable. |
| CVE-2017-1000253 | Linux distributions that have not patched their long-term kernels with https://git.kernel.org/linus/a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (committed on April 14, 2015). This kernel vulnerability was fixed in April 2015 by commit a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (backported to Linux 3.10.77 in May 2015), but it was not recognized as a security threat. With CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE enabled, and a normal top-down address allocation strategy, load_elf_binary() will attempt to map a PIE binary into an address range immediately below mm->mmap_base. Unfortunately, load_elf_ binary() does not take account of the need to allocate sufficient space for the entire binary which means that, while the first PT_LOAD segment is mapped below mm->mmap_base, the subsequent PT_LOAD segment(s) end up being mapped above mm->mmap_base into the are that is supposed to be the "gap" between the stack and the binary. |
| CVE-2017-1000252 | The KVM subsystem in the Linux kernel through 4.13.3 allows guest OS users to cause a denial of service (assertion failure, and hypervisor hang or crash) via an out-of bounds guest_irq value, related to arch/x86/kvm/vmx.c and virt/kvm/eventfd.c. |
| CVE-2017-1000251 | The native Bluetooth stack in the Linux Kernel (BlueZ), starting at the Linux kernel version 2.6.32 and up to and including 4.13.1, are vulnerable to a stack overflow vulnerability in the processing of L2CAP configuration responses resulting in Remote code execution in kernel space. |
| CVE-2017-1000112 | Linux kernel: Exploitable memory corruption due to UFO to non-UFO path switch. When building a UFO packet with MSG_MORE __ip_append_data() calls ip_ufo_append_data() to append. However in between two send() calls, the append path can be switched from UFO to non-UFO one, which leads to a memory corruption. In case UFO packet lengths exceeds MTU, copy = maxfraglen - skb->len becomes negative on the non-UFO path and the branch to allocate new skb is taken. This triggers fragmentation and computation of fraggap = skb_prev->len - maxfraglen. Fraggap can exceed MTU, causing copy = datalen - transhdrlen - fraggap to become negative. Subsequently skb_copy_and_csum_bits() writes out-of-bounds. A similar issue is present in IPv6 code. The bug was introduced in e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach") on Oct 18 2005. |
| CVE-2017-1000111 | Linux kernel: heap out-of-bounds in AF_PACKET sockets. This new issue is analogous to previously disclosed CVE-2016-8655. In both cases, a socket option that changes socket state may race with safety checks in packet_set_ring. Previously with PACKET_VERSION. This time with PACKET_RESERVE. The solution is similar: lock the socket for the update. This issue may be exploitable, we did not investigate further. As this issue affects PF_PACKET sockets, it requires CAP_NET_RAW in the process namespace. But note that with user namespaces enabled, any process can create a namespace in which it has CAP_NET_RAW. |
| CVE-2017-0861 | Use-after-free vulnerability in the snd_pcm_info function in the ALSA subsystem in the Linux kernel allows attackers to gain privileges via unspecified vectors. |
| CVE-2017-0750 | A elevation of privilege vulnerability in the Upstream Linux file system. Product: Android. Versions: Android kernel. Android ID: A-36817013. |
| CVE-2017-0749 | A elevation of privilege vulnerability in the Upstream Linux linux kernel. Product: Android. Versions: Android kernel. Android ID: A-36007735. |
| CVE-2017-0710 | A elevation of privilege vulnerability in the Upstream Linux tcb. Product: Android. Versions: Android kernel. Android ID: A-34951864. |
| CVE-2017-0318 | All versions of NVIDIA Linux GPU Display Driver contain a vulnerability in the kernel mode layer handler where improper validation of an input parameter may cause a denial of service on the system. |
| CVE-2016-9919 | The icmp6_send function in net/ipv6/icmp.c in the Linux kernel through 4.8.12 omits a certain check of the dst data structure, which allows remote attackers to cause a denial of service (panic) via a fragmented IPv6 packet. |
| CVE-2016-9806 | Race condition in the netlink_dump function in net/netlink/af_netlink.c in the Linux kernel before 4.6.3 allows local users to cause a denial of service (double free) or possibly have unspecified other impact via a crafted application that makes sendmsg system calls, leading to a free operation associated with a new dump that started earlier than anticipated. |
| CVE-2016-9794 | Race condition in the snd_pcm_period_elapsed function in sound/core/pcm_lib.c in the ALSA subsystem in the Linux kernel before 4.7 allows local users to cause a denial of service (use-after-free) or possibly have unspecified other impact via a crafted SNDRV_PCM_TRIGGER_START command. |
| CVE-2016-9793 | The sock_setsockopt function in net/core/sock.c in the Linux kernel before 4.8.14 mishandles negative values of sk_sndbuf and sk_rcvbuf, which allows local users to cause a denial of service (memory corruption and system crash) or possibly have unspecified other impact by leveraging the CAP_NET_ADMIN capability for a crafted setsockopt system call with the (1) SO_SNDBUFFORCE or (2) SO_RCVBUFFORCE option. |
| CVE-2016-9777 | KVM in the Linux kernel before 4.8.12, when I/O APIC is enabled, does not properly restrict the VCPU index, which allows guest OS users to gain host OS privileges or cause a denial of service (out-of-bounds array access and host OS crash) via a crafted interrupt request, related to arch/x86/kvm/ioapic.c and arch/x86/kvm/ioapic.h. |
| CVE-2016-9756 | arch/x86/kvm/emulate.c in the Linux kernel before 4.8.12 does not properly initialize Code Segment (CS) in certain error cases, which allows local users to obtain sensitive information from kernel stack memory via a crafted application. |
| CVE-2016-9755 | The netfilter subsystem in the Linux kernel before 4.9 mishandles IPv6 reassembly, which allows local users to cause a denial of service (integer overflow, out-of-bounds write, and GPF) or possibly have unspecified other impact via a crafted application that makes socket, connect, and writev system calls, related to net/ipv6/netfilter/nf_conntrack_reasm.c and net/ipv6/netfilter/nf_defrag_ipv6_hooks.c. |
| CVE-2016-9754 | The ring_buffer_resize function in kernel/trace/ring_buffer.c in the profiling subsystem in the Linux kernel before 4.6.1 mishandles certain integer calculations, which allows local users to gain privileges by writing to the /sys/kernel/debug/tracing/buffer_size_kb file. |
| CVE-2016-9685 | Multiple memory leaks in error paths in fs/xfs/xfs_attr_list.c in the Linux kernel before 4.5.1 allow local users to cause a denial of service (memory consumption) via crafted XFS filesystem operations. |
| CVE-2016-9644 | The __get_user_asm_ex macro in arch/x86/include/asm/uaccess.h in the Linux kernel 4.4.22 through 4.4.28 contains extended asm statements that are incompatible with the exception table, which allows local users to obtain root access on non-SMEP platforms via a crafted application. NOTE: this vulnerability exists because of incorrect backporting of the CVE-2016-9178 patch to older kernels. |
| CVE-2016-9604 | It was discovered in the Linux kernel before 4.11-rc8 that root can gain direct access to an internal keyring, such as '.dns_resolver' in RHEL-7 or '.builtin_trusted_keys' upstream, by joining it as its session keyring. This allows root to bypass module signature verification by adding a new public key of its own devising to the keyring. |
| CVE-2016-9588 | arch/x86/kvm/vmx.c in the Linux kernel through 4.9 mismanages the #BP and #OF exceptions, which allows guest OS users to cause a denial of service (guest OS crash) by declining to handle an exception thrown by an L2 guest. |
| CVE-2016-9576 | The blk_rq_map_user_iov function in block/blk-map.c in the Linux kernel before 4.8.14 does not properly restrict the type of iterator, which allows local users to read or write to arbitrary kernel memory locations or cause a denial of service (use-after-free) by leveraging access to a /dev/sg device. |
| CVE-2016-9555 | The sctp_sf_ootb function in net/sctp/sm_statefuns.c in the Linux kernel before 4.8.8 lacks chunk-length checking for the first chunk, which allows remote attackers to cause a denial of service (out-of-bounds slab access) or possibly have unspecified other impact via crafted SCTP data. |
| CVE-2016-9313 | security/keys/big_key.c in the Linux kernel before 4.8.7 mishandles unsuccessful crypto registration in conjunction with successful key-type registration, which allows local users to cause a denial of service (NULL pointer dereference and panic) or possibly have unspecified other impact via a crafted application that uses the big_key data type. |
| CVE-2016-9191 | The cgroup offline implementation in the Linux kernel through 4.8.11 mishandles certain drain operations, which allows local users to cause a denial of service (system hang) by leveraging access to a container environment for executing a crafted application, as demonstrated by trinity. |
| CVE-2016-9178 | The __get_user_asm_ex macro in arch/x86/include/asm/uaccess.h in the Linux kernel before 4.7.5 does not initialize a certain integer variable, which allows local users to obtain sensitive information from kernel stack memory by triggering failure of a get_user_ex call. |
| CVE-2016-9120 | Race condition in the ion_ioctl function in drivers/staging/android/ion/ion.c in the Linux kernel before 4.6 allows local users to gain privileges or cause a denial of service (use-after-free) by calling ION_IOC_FREE on two CPUs at the same time. |
| CVE-2016-9084 | drivers/vfio/pci/vfio_pci_intrs.c in the Linux kernel through 4.8.11 misuses the kzalloc function, which allows local users to cause a denial of service (integer overflow) or have unspecified other impact by leveraging access to a vfio PCI device file. |
| CVE-2016-9083 | drivers/vfio/pci/vfio_pci.c in the Linux kernel through 4.8.11 allows local users to bypass integer overflow checks, and cause a denial of service (memory corruption) or have unspecified other impact, by leveraging access to a vfio PCI device file for a VFIO_DEVICE_SET_IRQS ioctl call, aka a "state machine confusion bug." |
| CVE-2016-8826 | All versions of NVIDIA GPU Display Driver contain a vulnerability in the kernel mode layer (nvlddmkm.sys for Windows or nvidia.ko for Linux) where a user can cause a GPU interrupt storm, leading to a denial of service. |
| CVE-2016-8666 | The IP stack in the Linux kernel before 4.6 allows remote attackers to cause a denial of service (stack consumption and panic) or possibly have unspecified other impact by triggering use of the GRO path for packets with tunnel stacking, as demonstrated by interleaved IPv4 headers and GRE headers, a related issue to CVE-2016-7039. |
| CVE-2016-8660 | The XFS subsystem in the Linux kernel through 4.8.2 allows local users to cause a denial of service (fdatasync failure and system hang) by using the vfs syscall group in the trinity program, related to a "page lock order bug in the XFS seek hole/data implementation." |
| CVE-2016-8658 | Stack-based buffer overflow in the brcmf_cfg80211_start_ap function in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c in the Linux kernel before 4.7.5 allows local users to cause a denial of service (system crash) or possibly have unspecified other impact via a long SSID Information Element in a command to a Netlink socket. |
| CVE-2016-8655 | Race condition in net/packet/af_packet.c in the Linux kernel through 4.8.12 allows local users to gain privileges or cause a denial of service (use-after-free) by leveraging the CAP_NET_RAW capability to change a socket version, related to the packet_set_ring and packet_setsockopt functions. |
| CVE-2016-8650 | The mpi_powm function in lib/mpi/mpi-pow.c in the Linux kernel through 4.8.11 does not ensure that memory is allocated for limb data, which allows local users to cause a denial of service (stack memory corruption and panic) via an add_key system call for an RSA key with a zero exponent. |
| CVE-2016-8646 | The hash_accept function in crypto/algif_hash.c in the Linux kernel before 4.3.6 allows local users to cause a denial of service (OOPS) by attempting to trigger use of in-kernel hash algorithms for a socket that has received zero bytes of data. |
| CVE-2016-8645 | The TCP stack in the Linux kernel before 4.8.10 mishandles skb truncation, which allows local users to cause a denial of service (system crash) via a crafted application that makes sendto system calls, related to net/ipv4/tcp_ipv4.c and net/ipv6/tcp_ipv6.c. |
| CVE-2016-8636 | Integer overflow in the mem_check_range function in drivers/infiniband/sw/rxe/rxe_mr.c in the Linux kernel before 4.9.10 allows local users to cause a denial of service (memory corruption), obtain sensitive information from kernel memory, or possibly have unspecified other impact via a write or read request involving the "RDMA protocol over infiniband" (aka Soft RoCE) technology. |
| CVE-2016-8633 | drivers/firewire/net.c in the Linux kernel before 4.8.7, in certain unusual hardware configurations, allows remote attackers to execute arbitrary code via crafted fragmented packets. |
| CVE-2016-8632 | The tipc_msg_build function in net/tipc/msg.c in the Linux kernel through 4.8.11 does not validate the relationship between the minimum fragment length and the maximum packet size, which allows local users to gain privileges or cause a denial of service (heap-based buffer overflow) by leveraging the CAP_NET_ADMIN capability. |
| CVE-2016-8630 | The x86_decode_insn function in arch/x86/kvm/emulate.c in the Linux kernel before 4.8.7, when KVM is enabled, allows local users to cause a denial of service (host OS crash) via a certain use of a ModR/M byte in an undefined instruction. |
| CVE-2016-7917 | The nfnetlink_rcv_batch function in net/netfilter/nfnetlink.c in the Linux kernel before 4.5 does not check whether a batch message's length field is large enough, which allows local users to obtain sensitive information from kernel memory or cause a denial of service (infinite loop or out-of-bounds read) by leveraging the CAP_NET_ADMIN capability. |
| CVE-2016-7916 | Race condition in the environ_read function in fs/proc/base.c in the Linux kernel before 4.5.4 allows local users to obtain sensitive information from kernel memory by reading a /proc/*/environ file during a process-setup time interval in which environment-variable copying is incomplete. |
| CVE-2016-7915 | The hid_input_field function in drivers/hid/hid-core.c in the Linux kernel before 4.6 allows physically proximate attackers to obtain sensitive information from kernel memory or cause a denial of service (out-of-bounds read) by connecting a device, as demonstrated by a Logitech DJ receiver. |
| CVE-2016-7914 | The assoc_array_insert_into_terminal_node function in lib/assoc_array.c in the Linux kernel before 4.5.3 does not check whether a slot is a leaf, which allows local users to obtain sensitive information from kernel memory or cause a denial of service (invalid pointer dereference and out-of-bounds read) via an application that uses associative-array data structures, as demonstrated by the keyutils test suite. |
| CVE-2016-7913 | The xc2028_set_config function in drivers/media/tuners/tuner-xc2028.c in the Linux kernel before 4.6 allows local users to gain privileges or cause a denial of service (use-after-free) via vectors involving omission of the firmware name from a certain data structure. |
| CVE-2016-7912 | Use-after-free vulnerability in the ffs_user_copy_worker function in drivers/usb/gadget/function/f_fs.c in the Linux kernel before 4.5.3 allows local users to gain privileges by accessing an I/O data structure after a certain callback call. |
| CVE-2016-7911 | Race condition in the get_task_ioprio function in block/ioprio.c in the Linux kernel before 4.6.6 allows local users to gain privileges or cause a denial of service (use-after-free) via a crafted ioprio_get system call. |
| CVE-2016-7910 | Use-after-free vulnerability in the disk_seqf_stop function in block/genhd.c in the Linux kernel before 4.7.1 allows local users to gain privileges by leveraging the execution of a certain stop operation even if the corresponding start operation had failed. |
| CVE-2016-7425 | The arcmsr_iop_message_xfer function in drivers/scsi/arcmsr/arcmsr_hba.c in the Linux kernel through 4.8.2 does not restrict a certain length field, which allows local users to gain privileges or cause a denial of service (heap-based buffer overflow) via an ARCMSR_MESSAGE_WRITE_WQBUFFER control code. |
| CVE-2016-7389 | For the NVIDIA Quadro, NVS, GeForce, and Tesla products, NVIDIA GPU Display Driver on Linux R304 before 304.132, R340 before 340.98, R367 before 367.55, R361_93 before 361.93.03, and R370 before 370.28 contains a vulnerability in the kernel mode layer (nvidia.ko) handler for mmap() where improper input validation may allow users to gain access to arbitrary physical memory, leading to an escalation of privileges. |
| CVE-2016-7382 | For the NVIDIA Quadro, NVS, GeForce, and Tesla products, NVIDIA GPU Display Driver contains a vulnerability in the kernel mode layer (nvlddmkm.sys for Windows or nvidia.ko for Linux) handler where a missing permissions check may allow users to gain access to arbitrary physical memory, leading to an escalation of privileges. |
| CVE-2016-7118 | fs/fcntl.c in the "aufs 3.2.x+setfl-debian" patch in the linux-image package 3.2.0-4 (kernel 3.2.81-1) in Debian wheezy mishandles F_SETFL fcntl calls on directories, which allows local users to cause a denial of service (NULL pointer dereference and system crash) via standard filesystem operations, as demonstrated by scp from an AUFS filesystem. |
| CVE-2016-7117 | Use-after-free vulnerability in the __sys_recvmmsg function in net/socket.c in the Linux kernel before 4.5.2 allows remote attackers to execute arbitrary code via vectors involving a recvmmsg system call that is mishandled during error processing. |
| CVE-2016-7097 | The filesystem implementation in the Linux kernel through 4.8.2 preserves the setgid bit during a setxattr call, which allows local users to gain group privileges by leveraging the existence of a setgid program with restrictions on execute permissions. |
| CVE-2016-7042 | The proc_keys_show function in security/keys/proc.c in the Linux kernel through 4.8.2, when the GNU Compiler Collection (gcc) stack protector is enabled, uses an incorrect buffer size for certain timeout data, which allows local users to cause a denial of service (stack memory corruption and panic) by reading the /proc/keys file. |
| CVE-2016-7039 | The IP stack in the Linux kernel through 4.8.2 allows remote attackers to cause a denial of service (stack consumption and panic) or possibly have unspecified other impact by triggering use of the GRO path for large crafted packets, as demonstrated by packets that contain only VLAN headers, a related issue to CVE-2016-8666. |
| CVE-2016-6828 | The tcp_check_send_head function in include/net/tcp.h in the Linux kernel before 4.7.5 does not properly maintain certain SACK state after a failed data copy, which allows local users to cause a denial of service (tcp_xmit_retransmit_queue use-after-free and system crash) via a crafted SACK option. |
| CVE-2016-6787 | kernel/events/core.c in the performance subsystem in the Linux kernel before 4.0 mismanages locks during certain migrations, which allows local users to gain privileges via a crafted application, aka Android internal bug 31095224. |
| CVE-2016-6786 | kernel/events/core.c in the performance subsystem in the Linux kernel before 4.0 mismanages locks during certain migrations, which allows local users to gain privileges via a crafted application, aka Android internal bug 30955111. |
| CVE-2016-6516 | Race condition in the ioctl_file_dedupe_range function in fs/ioctl.c in the Linux kernel through 4.7 allows local users to cause a denial of service (heap-based buffer overflow) or possibly gain privileges by changing a certain count value, aka a "double fetch" vulnerability. |
| CVE-2016-6480 | Race condition in the ioctl_send_fib function in drivers/scsi/aacraid/commctrl.c in the Linux kernel through 4.7 allows local users to cause a denial of service (out-of-bounds access or system crash) by changing a certain size value, aka a "double fetch" vulnerability. |
| CVE-2016-6327 | drivers/infiniband/ulp/srpt/ib_srpt.c in the Linux kernel before 4.5.1 allows local users to cause a denial of service (NULL pointer dereference and system crash) by using an ABORT_TASK command to abort a device write operation. |
| CVE-2016-6213 | fs/namespace.c in the Linux kernel before 4.9 does not restrict how many mounts may exist in a mount namespace, which allows local users to cause a denial of service (memory consumption and deadlock) via MS_BIND mount system calls, as demonstrated by a loop that triggers exponential growth in the number of mounts. |
| CVE-2016-6198 | The filesystem layer in the Linux kernel before 4.5.5 proceeds with post-rename operations after an OverlayFS file is renamed to a self-hardlink, which allows local users to cause a denial of service (system crash) via a rename system call, related to fs/namei.c and fs/open.c. |
| CVE-2016-6197 | fs/overlayfs/dir.c in the OverlayFS filesystem implementation in the Linux kernel before 4.6 does not properly verify the upper dentry before proceeding with unlink and rename system-call processing, which allows local users to cause a denial of service (system crash) via a rename system call that specifies a self-hardlink. |
| CVE-2016-6187 | The apparmor_setprocattr function in security/apparmor/lsm.c in the Linux kernel before 4.6.5 does not validate the buffer size, which allows local users to gain privileges by triggering an AppArmor setprocattr hook. |
| CVE-2016-6162 | net/core/skbuff.c in the Linux kernel 4.7-rc6 allows local users to cause a denial of service (panic) or possibly have unspecified other impact via certain IPv6 socket operations. |
| CVE-2016-6156 | Race condition in the ec_device_ioctl_xcmd function in drivers/platform/chrome/cros_ec_dev.c in the Linux kernel before 4.7 allows local users to cause a denial of service (out-of-bounds array access) by changing a certain size value, aka a "double fetch" vulnerability. |
| CVE-2016-6136 | Race condition in the audit_log_single_execve_arg function in kernel/auditsc.c in the Linux kernel through 4.7 allows local users to bypass intended character-set restrictions or disrupt system-call auditing by changing a certain string, aka a "double fetch" vulnerability. |
| CVE-2016-6130 | Race condition in the sclp_ctl_ioctl_sccb function in drivers/s390/char/sclp_ctl.c in the Linux kernel before 4.6 allows local users to obtain sensitive information from kernel memory by changing a certain length value, aka a "double fetch" vulnerability. |
| CVE-2016-5872 | In all Qualcomm products with Android releases from CAF using the Linux kernel, arguments to several QTEE syscalls are not properly validated. |
| CVE-2016-5871 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an integer overflow to buffer overflow vulnerability exists when loading an image file. |
| CVE-2016-5870 | The msm_ipc_router_close function in net/ipc_router/ipc_router_socket.c in the ipc_router component for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allow attackers to cause a denial of service (NULL pointer dereference) or possibly have unspecified other impact by triggering failure of an accept system call for an AF_MSM_IPC socket. |
| CVE-2016-5853 | In an audio driver in all Qualcomm products with Android releases from CAF using the Linux kernel, when a sanity check encounters a length value not in the correct range, an error message is printed, but code execution continues in the same way as for a correct length value. |
| CVE-2016-5829 | Multiple heap-based buffer overflows in the hiddev_ioctl_usage function in drivers/hid/usbhid/hiddev.c in the Linux kernel through 4.6.3 allow local users to cause a denial of service or possibly have unspecified other impact via a crafted (1) HIDIOCGUSAGES or (2) HIDIOCSUSAGES ioctl call. |
| CVE-2016-5828 | The start_thread function in arch/powerpc/kernel/process.c in the Linux kernel through 4.6.3 on powerpc platforms mishandles transactional state, which allows local users to cause a denial of service (invalid process state or TM Bad Thing exception, and system crash) or possibly have unspecified other impact by starting and suspending a transaction before an exec system call. |
| CVE-2016-5728 | Race condition in the vop_ioctl function in drivers/misc/mic/vop/vop_vringh.c in the MIC VOP driver in the Linux kernel before 4.6.1 allows local users to obtain sensitive information from kernel memory or cause a denial of service (memory corruption and system crash) by changing a certain header, aka a "double fetch" vulnerability. |
| CVE-2016-5696 | net/ipv4/tcp_input.c in the Linux kernel before 4.7 does not properly determine the rate of challenge ACK segments, which makes it easier for remote attackers to hijack TCP sessions via a blind in-window attack. |
| CVE-2016-5412 | arch/powerpc/kvm/book3s_hv_rmhandlers.S in the Linux kernel through 4.7 on PowerPC platforms, when CONFIG_KVM_BOOK3S_64_HV is enabled, allows guest OS users to cause a denial of service (host OS infinite loop) by making a H_CEDE hypercall during the existence of a suspended transaction. |
| CVE-2016-5400 | Memory leak in the airspy_probe function in drivers/media/usb/airspy/airspy.c in the airspy USB driver in the Linux kernel before 4.7 allows local users to cause a denial of service (memory consumption) via a crafted USB device that emulates many VFL_TYPE_SDR or VFL_TYPE_SUBDEV devices and performs many connect and disconnect operations. |
| CVE-2016-5349 | The high level operating systems (HLOS) was not providing sufficient memory address information to ensure that secure applications inside Qualcomm Secure Execution Environment (QSEE) only write to legitimate memory ranges related to the QSEE secure application's HLOS client. When secure applications inside Qualcomm Secure Execution Environment (QSEE) receive memory addresses from a high level operating system (HLOS) such as Linux Android, those address have previously been verified as belonging to HLOS memory space rather than QSEE memory space, but they were not verified to be from HLOS user space rather than kernel space. This lack of verification could lead to privilege escalation within the HLOS. |
| CVE-2016-5347 | In all Qualcomm products with Android releases from CAF using the Linux kernel, kernel stack data can be leaked to userspace by an audio driver. |
| CVE-2016-5344 | Multiple integer overflows in the MDSS driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allow attackers to cause a denial of service or possibly have unspecified other impact via a large size value, related to mdss_compat_utils.c, mdss_fb.c, and mdss_rotator.c. |
| CVE-2016-5343 | drivers/soc/qcom/qdsp6v2/voice_svc.c in the QDSP6v2 Voice Service driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via a write request, as demonstrated by a voice_svc_send_req buffer overflow. |
| CVE-2016-5342 | Heap-based buffer overflow in the wcnss_wlan_write function in drivers/net/wireless/wcnss/wcnss_wlan.c in the wcnss_wlan device driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to cause a denial of service or possibly have unspecified other impact by writing to /dev/wcnss_wlan with an unexpected amount of data. |
| CVE-2016-5340 | The is_ashmem_file function in drivers/staging/android/ashmem.c in a certain Qualcomm Innovation Center (QuIC) Android patch for the Linux kernel 3.x mishandles pointer validation within the KGSL Linux Graphics Module, which allows attackers to bypass intended access restrictions by using the /ashmem string as the dentry name. |
| CVE-2016-5244 | The rds_inc_info_copy function in net/rds/recv.c in the Linux kernel through 4.6.3 does not initialize a certain structure member, which allows remote attackers to obtain sensitive information from kernel stack memory by reading an RDS message. |
| CVE-2016-5243 | The tipc_nl_compat_link_dump function in net/tipc/netlink_compat.c in the Linux kernel through 4.6.3 does not properly copy a certain string, which allows local users to obtain sensitive information from kernel stack memory by reading a Netlink message. |
| CVE-2016-5195 | Race condition in mm/gup.c in the Linux kernel 2.x through 4.x before 4.8.3 allows local users to gain privileges by leveraging incorrect handling of a copy-on-write (COW) feature to write to a read-only memory mapping, as exploited in the wild in October 2016, aka "Dirty COW." |
| CVE-2016-4998 | The IPT_SO_SET_REPLACE setsockopt implementation in the netfilter subsystem in the Linux kernel before 4.6 allows local users to cause a denial of service (out-of-bounds read) or possibly obtain sensitive information from kernel heap memory by leveraging in-container root access to provide a crafted offset value that leads to crossing a ruleset blob boundary. |
| CVE-2016-4997 | The compat IPT_SO_SET_REPLACE and IP6T_SO_SET_REPLACE setsockopt implementations in the netfilter subsystem in the Linux kernel before 4.6.3 allow local users to gain privileges or cause a denial of service (memory corruption) by leveraging in-container root access to provide a crafted offset value that triggers an unintended decrement. |
| CVE-2016-4951 | The tipc_nl_publ_dump function in net/tipc/socket.c in the Linux kernel through 4.6 does not verify socket existence, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a dumpit operation. |
| CVE-2016-4913 | The get_rock_ridge_filename function in fs/isofs/rock.c in the Linux kernel before 4.5.5 mishandles NM (aka alternate name) entries containing \0 characters, which allows local users to obtain sensitive information from kernel memory or possibly have unspecified other impact via a crafted isofs filesystem. |
| CVE-2016-4805 | Use-after-free vulnerability in drivers/net/ppp/ppp_generic.c in the Linux kernel before 4.5.2 allows local users to cause a denial of service (memory corruption and system crash, or spinlock) or possibly have unspecified other impact by removing a network namespace, related to the ppp_register_net_channel and ppp_unregister_channel functions. |
| CVE-2016-4794 | Use-after-free vulnerability in mm/percpu.c in the Linux kernel through 4.6 allows local users to cause a denial of service (BUG) or possibly have unspecified other impact via crafted use of the mmap and bpf system calls. |
| CVE-2016-4581 | fs/pnode.c in the Linux kernel before 4.5.4 does not properly traverse a mount propagation tree in a certain case involving a slave mount, which allows local users to cause a denial of service (NULL pointer dereference and OOPS) via a crafted series of mount system calls. |
| CVE-2016-4580 | The x25_negotiate_facilities function in net/x25/x25_facilities.c in the Linux kernel before 4.5.5 does not properly initialize a certain data structure, which allows attackers to obtain sensitive information from kernel stack memory via an X.25 Call Request. |
| CVE-2016-4578 | sound/core/timer.c in the Linux kernel through 4.6 does not initialize certain r1 data structures, which allows local users to obtain sensitive information from kernel stack memory via crafted use of the ALSA timer interface, related to the (1) snd_timer_user_ccallback and (2) snd_timer_user_tinterrupt functions. |
| CVE-2016-4569 | The snd_timer_user_params function in sound/core/timer.c in the Linux kernel through 4.6 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel stack memory via crafted use of the ALSA timer interface. |
| CVE-2016-4568 | drivers/media/v4l2-core/videobuf2-v4l2.c in the Linux kernel before 4.5.3 allows local users to cause a denial of service (kernel memory write operation) or possibly have unspecified other impact via a crafted number of planes in a VIDIOC_DQBUF ioctl call. |
| CVE-2016-4565 | The InfiniBand (aka IB) stack in the Linux kernel before 4.5.3 incorrectly relies on the write system call, which allows local users to cause a denial of service (kernel memory write operation) or possibly have unspecified other impact via a uAPI interface. |
| CVE-2016-4558 | The BPF subsystem in the Linux kernel before 4.5.5 mishandles reference counts, which allows local users to cause a denial of service (use-after-free) or possibly have unspecified other impact via a crafted application on (1) a system with more than 32 Gb of memory, related to the program reference count or (2) a 1 Tb system, related to the map reference count. |
| CVE-2016-4557 | The replace_map_fd_with_map_ptr function in kernel/bpf/verifier.c in the Linux kernel before 4.5.5 does not properly maintain an fd data structure, which allows local users to gain privileges or cause a denial of service (use-after-free) via crafted BPF instructions that reference an incorrect file descriptor. |
| CVE-2016-4486 | The rtnl_fill_link_ifmap function in net/core/rtnetlink.c in the Linux kernel before 4.5.5 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel stack memory by reading a Netlink message. |
| CVE-2016-4485 | The llc_cmsg_rcv function in net/llc/af_llc.c in the Linux kernel before 4.5.5 does not initialize a certain data structure, which allows attackers to obtain sensitive information from kernel stack memory by reading a message. |
| CVE-2016-4482 | The proc_connectinfo function in drivers/usb/core/devio.c in the Linux kernel through 4.6 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel stack memory via a crafted USBDEVFS_CONNECTINFO ioctl call. |
| CVE-2016-4470 | The key_reject_and_link function in security/keys/key.c in the Linux kernel through 4.6.3 does not ensure that a certain data structure is initialized, which allows local users to cause a denial of service (system crash) via vectors involving a crafted keyctl request2 command. |
| CVE-2016-4440 | arch/x86/kvm/vmx.c in the Linux kernel through 4.6.3 mishandles the APICv on/off state, which allows guest OS users to obtain direct APIC MSR access on the host OS, and consequently cause a denial of service (host OS crash) or possibly execute arbitrary code on the host OS, via x2APIC mode. |
| CVE-2016-3961 | Xen and the Linux kernel through 4.5.x do not properly suppress hugetlbfs support in x86 PV guests, which allows local PV guest OS users to cause a denial of service (guest OS crash) by attempting to access a hugetlbfs mapped area. |
| CVE-2016-3955 | The usbip_recv_xbuff function in drivers/usb/usbip/usbip_common.c in the Linux kernel before 4.5.3 allows remote attackers to cause a denial of service (out-of-bounds write) or possibly have unspecified other impact via a crafted length value in a USB/IP packet. |
| CVE-2016-3951 | Double free vulnerability in drivers/net/usb/cdc_ncm.c in the Linux kernel before 4.5 allows physically proximate attackers to cause a denial of service (system crash) or possibly have unspecified other impact by inserting a USB device with an invalid USB descriptor. |
| CVE-2016-3841 | The IPv6 stack in the Linux kernel before 4.3.3 mishandles options data, which allows local users to gain privileges or cause a denial of service (use-after-free and system crash) via a crafted sendmsg system call. |
| CVE-2016-3713 | The msr_mtrr_valid function in arch/x86/kvm/mtrr.c in the Linux kernel before 4.6.1 supports MSR 0x2f8, which allows guest OS users to read or write to the kvm_arch_vcpu data structure, and consequently obtain sensitive information or cause a denial of service (system crash), via a crafted ioctl call. |
| CVE-2016-3707 | The icmp_check_sysrq function in net/ipv4/icmp.c in the kernel.org projects/rt patches for the Linux kernel, as used in the kernel-rt package before 3.10.0-327.22.1 in Red Hat Enterprise Linux for Real Time 7 and other products, allows remote attackers to execute SysRq commands via crafted ICMP Echo Request packets, as demonstrated by a brute-force attack to discover a cookie, or an attack that occurs after reading the local icmp_echo_sysrq file. |
| CVE-2016-3699 | The Linux kernel, as used in Red Hat Enterprise Linux 7.2 and Red Hat Enterprise MRG 2 and when booted with UEFI Secure Boot enabled, allows local users to bypass intended Secure Boot restrictions and execute untrusted code by appending ACPI tables to the initrd. |
| CVE-2016-3695 | The einj_error_inject function in drivers/acpi/apei/einj.c in the Linux kernel allows local users to simulate hardware errors and consequently cause a denial of service by leveraging failure to disable APEI error injection through EINJ when securelevel is set. |
| CVE-2016-3689 | The ims_pcu_parse_cdc_data function in drivers/input/misc/ims-pcu.c in the Linux kernel before 4.5.1 allows physically proximate attackers to cause a denial of service (system crash) via a USB device without both a master and a slave interface. |
| CVE-2016-3672 | The arch_pick_mmap_layout function in arch/x86/mm/mmap.c in the Linux kernel through 4.5.2 does not properly randomize the legacy base address, which makes it easier for local users to defeat the intended restrictions on the ADDR_NO_RANDOMIZE flag, and bypass the ASLR protection mechanism for a setuid or setgid program, by disabling stack-consumption resource limits. |
| CVE-2016-3157 | The __switch_to function in arch/x86/kernel/process_64.c in the Linux kernel does not properly context-switch IOPL on 64-bit PV Xen guests, which allows local guest OS users to gain privileges, cause a denial of service (guest OS crash), or obtain sensitive information by leveraging I/O port access. |
| CVE-2016-3156 | The IPv4 implementation in the Linux kernel before 4.5.2 mishandles destruction of device objects, which allows guest OS users to cause a denial of service (host OS networking outage) by arranging for a large number of IP addresses. |
| CVE-2016-3140 | The digi_port_init function in drivers/usb/serial/digi_acceleport.c in the Linux kernel before 4.5.1 allows physically proximate attackers to cause a denial of service (NULL pointer dereference and system crash) via a crafted endpoints value in a USB device descriptor. |
| CVE-2016-3139 | The wacom_probe function in drivers/input/tablet/wacom_sys.c in the Linux kernel before 3.17 allows physically proximate attackers to cause a denial of service (NULL pointer dereference and system crash) via a crafted endpoints value in a USB device descriptor. |
| CVE-2016-3138 | The acm_probe function in drivers/usb/class/cdc-acm.c in the Linux kernel before 4.5.1 allows physically proximate attackers to cause a denial of service (NULL pointer dereference and system crash) via a USB device without both a control and a data endpoint descriptor. |
| CVE-2016-3137 | drivers/usb/serial/cypress_m8.c in the Linux kernel before 4.5.1 allows physically proximate attackers to cause a denial of service (NULL pointer dereference and system crash) via a USB device without both an interrupt-in and an interrupt-out endpoint descriptor, related to the cypress_generic_port_probe and cypress_open functions. |
| CVE-2016-3136 | The mct_u232_msr_to_state function in drivers/usb/serial/mct_u232.c in the Linux kernel before 4.5.1 allows physically proximate attackers to cause a denial of service (NULL pointer dereference and system crash) via a crafted USB device without two interrupt-in endpoint descriptors. |
| CVE-2016-3135 | Integer overflow in the xt_alloc_table_info function in net/netfilter/x_tables.c in the Linux kernel through 4.5.2 on 32-bit platforms allows local users to gain privileges or cause a denial of service (heap memory corruption) via an IPT_SO_SET_REPLACE setsockopt call. |
| CVE-2016-3134 | The netfilter subsystem in the Linux kernel through 4.5.2 does not validate certain offset fields, which allows local users to gain privileges or cause a denial of service (heap memory corruption) via an IPT_SO_SET_REPLACE setsockopt call. |
| CVE-2016-3070 | The trace_writeback_dirty_page implementation in include/trace/events/writeback.h in the Linux kernel before 4.4 improperly interacts with mm/migrate.c, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by triggering a certain page move. |
| CVE-2016-3044 | The Linux kernel component in IBM PowerKVM 2.1 before 2.1.1.3-65.10 and 3.1 before 3.1.0.2 allows guest OS users to cause a denial of service (host OS infinite loop and hang) via unspecified vectors. |
| CVE-2016-2854 | The aufs module for the Linux kernel 3.x and 4.x does not properly maintain POSIX ACL xattr data, which allows local users to gain privileges by leveraging a group-writable setgid directory. |
| CVE-2016-2853 | The aufs module for the Linux kernel 3.x and 4.x does not properly restrict the mount namespace, which allows local users to gain privileges by mounting an aufs filesystem on top of a FUSE filesystem, and then executing a crafted setuid program. |
| CVE-2016-2847 | fs/pipe.c in the Linux kernel before 4.5 does not limit the amount of unread data in pipes, which allows local users to cause a denial of service (memory consumption) by creating many pipes with non-default sizes. |
| CVE-2016-2782 | The treo_attach function in drivers/usb/serial/visor.c in the Linux kernel before 4.5 allows physically proximate attackers to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by inserting a USB device that lacks a (1) bulk-in or (2) interrupt-in endpoint. |
| CVE-2016-2550 | The Linux kernel before 4.5 allows local users to bypass file-descriptor limits and cause a denial of service (memory consumption) by leveraging incorrect tracking of descriptor ownership and sending each descriptor over a UNIX socket before closing it. NOTE: this vulnerability exists because of an incorrect fix for CVE-2013-4312. |
| CVE-2016-2549 | sound/core/hrtimer.c in the Linux kernel before 4.4.1 does not prevent recursive callback access, which allows local users to cause a denial of service (deadlock) via a crafted ioctl call. |
| CVE-2016-2548 | sound/core/timer.c in the Linux kernel before 4.4.1 retains certain linked lists after a close or stop action, which allows local users to cause a denial of service (system crash) via a crafted ioctl call, related to the (1) snd_timer_close and (2) _snd_timer_stop functions. |
| CVE-2016-2547 | sound/core/timer.c in the Linux kernel before 4.4.1 employs a locking approach that does not consider slave timer instances, which allows local users to cause a denial of service (race condition, use-after-free, and system crash) via a crafted ioctl call. |
| CVE-2016-2546 | sound/core/timer.c in the Linux kernel before 4.4.1 uses an incorrect type of mutex, which allows local users to cause a denial of service (race condition, use-after-free, and system crash) via a crafted ioctl call. |
| CVE-2016-2545 | The snd_timer_interrupt function in sound/core/timer.c in the Linux kernel before 4.4.1 does not properly maintain a certain linked list, which allows local users to cause a denial of service (race condition and system crash) via a crafted ioctl call. |
| CVE-2016-2544 | Race condition in the queue_delete function in sound/core/seq/seq_queue.c in the Linux kernel before 4.4.1 allows local users to cause a denial of service (use-after-free and system crash) by making an ioctl call at a certain time. |
| CVE-2016-2543 | The snd_seq_ioctl_remove_events function in sound/core/seq/seq_clientmgr.c in the Linux kernel before 4.4.1 does not verify FIFO assignment before proceeding with FIFO clearing, which allows local users to cause a denial of service (NULL pointer dereference and OOPS) via a crafted ioctl call. |
| CVE-2016-2384 | Double free vulnerability in the snd_usbmidi_create function in sound/usb/midi.c in the Linux kernel before 4.5 allows physically proximate attackers to cause a denial of service (panic) or possibly have unspecified other impact via vectors involving an invalid USB descriptor. |
| CVE-2016-2383 | The adjust_branches function in kernel/bpf/verifier.c in the Linux kernel before 4.5 does not consider the delta in the backward-jump case, which allows local users to obtain sensitive information from kernel memory by creating a packet filter and then loading crafted BPF instructions. |
| CVE-2016-2188 | The iowarrior_probe function in drivers/usb/misc/iowarrior.c in the Linux kernel before 4.5.1 allows physically proximate attackers to cause a denial of service (NULL pointer dereference and system crash) via a crafted endpoints value in a USB device descriptor. |
| CVE-2016-2187 | The gtco_probe function in drivers/input/tablet/gtco.c in the Linux kernel through 4.5.2 allows physically proximate attackers to cause a denial of service (NULL pointer dereference and system crash) via a crafted endpoints value in a USB device descriptor. |
| CVE-2016-2186 | The powermate_probe function in drivers/input/misc/powermate.c in the Linux kernel before 4.5.1 allows physically proximate attackers to cause a denial of service (NULL pointer dereference and system crash) via a crafted endpoints value in a USB device descriptor. |
| CVE-2016-2185 | The ati_remote2_probe function in drivers/input/misc/ati_remote2.c in the Linux kernel before 4.5.1 allows physically proximate attackers to cause a denial of service (NULL pointer dereference and system crash) via a crafted endpoints value in a USB device descriptor. |
| CVE-2016-2184 | The create_fixed_stream_quirk function in sound/usb/quirks.c in the snd-usb-audio driver in the Linux kernel before 4.5.1 allows physically proximate attackers to cause a denial of service (NULL pointer dereference or double free, and system crash) via a crafted endpoints value in a USB device descriptor. |
| CVE-2016-2143 | The fork implementation in the Linux kernel before 4.5 on s390 platforms mishandles the case of four page-table levels, which allows local users to cause a denial of service (system crash) or possibly have unspecified other impact via a crafted application, related to arch/s390/include/asm/mmu_context.h and arch/s390/include/asm/pgalloc.h. |
| CVE-2016-2117 | The atl2_probe function in drivers/net/ethernet/atheros/atlx/atl2.c in the Linux kernel through 4.5.2 incorrectly enables scatter/gather I/O, which allows remote attackers to obtain sensitive information from kernel memory by reading packet data. |
| CVE-2016-2085 | The evm_verify_hmac function in security/integrity/evm/evm_main.c in the Linux kernel before 4.5 does not properly copy data, which makes it easier for local users to forge MAC values via a timing side-channel attack. |
| CVE-2016-2070 | The tcp_cwnd_reduction function in net/ipv4/tcp_input.c in the Linux kernel before 4.3.5 allows remote attackers to cause a denial of service (divide-by-zero error and system crash) via crafted TCP traffic. |
| CVE-2016-2069 | Race condition in arch/x86/mm/tlb.c in the Linux kernel before 4.4.1 allows local users to gain privileges by triggering access to a paging structure by a different CPU. |
| CVE-2016-2068 | The MSM QDSP6 audio driver (aka sound driver) for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to gain privileges or cause a denial of service (integer overflow, and buffer overflow or buffer over-read) via a crafted application that performs a (1) AUDIO_EFFECTS_WRITE or (2) AUDIO_EFFECTS_READ operation, aka Qualcomm internal bug CR1006609. |
| CVE-2016-2067 | drivers/gpu/msm/kgsl.c in the MSM graphics driver (aka GPU driver) for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, mishandles the KGSL_MEMFLAGS_GPUREADONLY flag, which allows attackers to gain privileges by leveraging accidental read-write mappings, aka Qualcomm internal bug CR988993. |
| CVE-2016-2066 | Integer signedness error in the MSM QDSP6 audio driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to gain privileges or cause a denial of service (memory corruption) via a crafted application that makes an ioctl call. |
| CVE-2016-2065 | sound/soc/msm/qdsp6v2/msm-audio-effects-q6-v2.c in the MSM QDSP6 audio driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to cause a denial of service (out-of-bounds write and memory corruption) or possibly have unspecified other impact via a crafted application that makes an ioctl call triggering incorrect use of a parameters pointer. |
| CVE-2016-2064 | sound/soc/msm/qdsp6v2/msm-audio-effects-q6-v2.c in the MSM QDSP6 audio driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to cause a denial of service (buffer over-read) or possibly have unspecified other impact via a crafted application that makes an ioctl call specifying many commands. |
| CVE-2016-2063 | Stack-based buffer overflow in the supply_lm_input_write function in drivers/thermal/supply_lm_core.c in the MSM Thermal driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to cause a denial of service or possibly have unspecified other impact via a crafted application that sends a large amount of data through the debugfs interface. |
| CVE-2016-2062 | The adreno_perfcounter_query_group function in drivers/gpu/msm/adreno_perfcounter.c in the Adreno GPU driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, uses an incorrect integer data type, which allows attackers to cause a denial of service (integer overflow, heap-based buffer overflow, and incorrect memory allocation) or possibly have unspecified other impact via a crafted IOCTL_KGSL_PERFCOUNTER_QUERY ioctl call. |
| CVE-2016-2061 | Integer signedness error in the MSM V4L2 video driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to gain privileges or cause a denial of service (array overflow and memory corruption) via a crafted application that triggers an msm_isp_axi_create_stream call. |
| CVE-2016-2059 | The msm_ipc_router_bind_control_port function in net/ipc_router/ipc_router_core.c in the IPC router kernel module for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, does not verify that a port is a client port, which allows attackers to gain privileges or cause a denial of service (race condition and list corruption) by making many BIND_CONTROL_PORT ioctl calls. |
| CVE-2016-2053 | The asn1_ber_decoder function in lib/asn1_decoder.c in the Linux kernel before 4.3 allows attackers to cause a denial of service (panic) via an ASN.1 BER file that lacks a public key, leading to mishandling by the public_key_verify_signature function in crypto/asymmetric_keys/public_key.c. |
| CVE-2016-20022 | ** UNSUPPORTED WHEN ASSIGNED ** In the Linux kernel before 4.8, usb_parse_endpoint in drivers/usb/core/config.c does not validate the wMaxPacketSize field of an endpoint descriptor. NOTE: This vulnerability only affects products that are no longer supported by the supplier. |
| CVE-2016-1881 | The kernel in FreeBSD 9.3, 10.1, and 10.2 allows local users to cause a denial of service (crash) or potentially gain privilege via a crafted Linux compatibility layer setgroups system call. |
| CVE-2016-1880 | The Linux compatibility layer in the kernel in FreeBSD 9.3, 10.1, and 10.2 allows local users to read portions of kernel memory and potentially gain privilege via unspecified vectors, related to "handling of Linux futex robust lists." |
| CVE-2016-1583 | The ecryptfs_privileged_open function in fs/ecryptfs/kthread.c in the Linux kernel before 4.6.3 allows local users to gain privileges or cause a denial of service (stack memory consumption) via vectors involving crafted mmap calls for /proc pathnames, leading to recursive pagefault handling. |
| CVE-2016-1576 | The overlayfs implementation in the Linux kernel through 4.5.2 does not properly restrict the mount namespace, which allows local users to gain privileges by mounting an overlayfs filesystem on top of a FUSE filesystem, and then executing a crafted setuid program. |
| CVE-2016-1575 | The overlayfs implementation in the Linux kernel through 4.5.2 does not properly maintain POSIX ACL xattr data, which allows local users to gain privileges by leveraging a group-writable setgid directory. |
| CVE-2016-1237 | nfsd in the Linux kernel through 4.6.3 allows local users to bypass intended file-permission restrictions by setting a POSIX ACL, related to nfs2acl.c, nfs3acl.c, and nfs4acl.c. |
| CVE-2016-10907 | An issue was discovered in drivers/iio/dac/ad5755.c in the Linux kernel before 4.8.6. There is an out of bounds write in the function ad5755_parse_dt. |
| CVE-2016-10906 | An issue was discovered in drivers/net/ethernet/arc/emac_main.c in the Linux kernel before 4.5. A use-after-free is caused by a race condition between the functions arc_emac_tx and arc_emac_tx_clean. |
| CVE-2016-10905 | An issue was discovered in fs/gfs2/rgrp.c in the Linux kernel before 4.8. A use-after-free is caused by the functions gfs2_clear_rgrpd and read_rindex_entry. |
| CVE-2016-10764 | In the Linux kernel before 4.9.6, there is an off by one in the drivers/mtd/spi-nor/cadence-quadspi.c cqspi_setup_flash() function. There are CQSPI_MAX_CHIPSELECT elements in the ->f_pdata array so the ">" should be ">=" instead. |
| CVE-2016-10741 | In the Linux kernel before 4.9.3, fs/xfs/xfs_aops.c allows local users to cause a denial of service (system crash) because there is a race condition between direct and memory-mapped I/O (associated with a hole) that is handled with BUG_ON instead of an I/O failure. |
| CVE-2016-10723 | ** DISPUTED ** An issue was discovered in the Linux kernel through 4.17.2. Since the page allocator does not yield CPU resources to the owner of the oom_lock mutex, a local unprivileged user can trivially lock up the system forever by wasting CPU resources from the page allocator (e.g., via concurrent page fault events) when the global OOM killer is invoked. NOTE: the software maintainer has not accepted certain proposed patches, in part because of a viewpoint that "the underlying problem is non-trivial to handle." |
| CVE-2016-10458 | In Android before 2018-04-05 or earlier security patch level on Qualcomm Snapdragon Mobile SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 427, SD 430, SD 435, SD 450, SD 615/16/SD 415, SD 617, SD 625, SD 650/52, SD 808, SD 810, SD 820, SD 835, SD 845, SDM630, SDM636, SDM660, SDX20, and Snapdragon_High_Med_2016, the 'proper' solution for this will be to ensure that any users of qsee_log in the bootchain (before Linux boots) unallocate their buffers and clear the qsee_log pointer. Until support for that is implemented in TZ and the bootloader, enable tz_log to avoid potential scribbling. This solution will prevent the linux kernel memory corruption. |
| CVE-2016-10393 | In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, when processing a clip with large size values, integer arithmetic overflows, and allocated buffer size will be less than intended buffer size. The following buffer operations will overflow the allocated buffer. |
| CVE-2016-10392 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a driver can potentially leak kernel memory. |
| CVE-2016-10391 | In all Qualcomm products with Android releases from CAF using the Linux kernel, the length in an HCI command is not properly checked for validity. |
| CVE-2016-10390 | In all Qualcomm products with Android releases from CAF using the Linux kernel, when downloading a file, an excessive amount of memory may be consumed. |
| CVE-2016-10389 | In all Qualcomm products with Android releases from CAF using the Linux kernel, there is no size check for the images being flashed onto the NAND memory in their respective partitions, so there is a possibility of writing beyond the intended partition. |
| CVE-2016-10388 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a configuration vulnerability exists when loading a 3rd-party QTEE application. |
| CVE-2016-10387 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an assertion was potentially reachable in a handover scenario. |
| CVE-2016-10386 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an array index out of bounds vulnerability exists in LPP. |
| CVE-2016-10385 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a use-after-free vulnerability exists in IMS RCS. |
| CVE-2016-10384 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an assertion was potentially reachable in a WLAN driver ioctl. |
| CVE-2016-10383 | In all Qualcomm products with Android releases from CAF using the Linux kernel, there is a TOCTOU race condition in Secure UI. |
| CVE-2016-10382 | In all Qualcomm products with Android releases from CAF using the Linux kernel, access control to the I2C bus is not sufficient. |
| CVE-2016-10381 | In all Qualcomm products with Android releases from CAF using the Linux kernel, the UE can send unprotected MeasurementReports revealing UE location. |
| CVE-2016-10380 | In all Qualcomm products with Android releases from CAF using the Linux kernel, the UE can send unprotected MeasurementReports revealing UE location. |
| CVE-2016-10347 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an argument to a hypervisor function is not properly validated. |
| CVE-2016-10346 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an integer overflow vulnerability exists in the hypervisor. |
| CVE-2016-10344 | In all Qualcomm products with Android releases from CAF using the Linux kernel, the use of an out-of-range pointer offset is potentially possible in LTE. |
| CVE-2016-10343 | In all Qualcomm products with Android releases from CAF using the Linux kernel, sSL handshake failure with ClientHello rejection results in memory leak. |
| CVE-2016-10342 | In all Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in a syscall handler. |
| CVE-2016-10341 | In all Android releases from CAF using the Linux kernel, 3rd party TEEs have more privilege than intended. |
| CVE-2016-10340 | In all Android releases from CAF using the Linux kernel, an integer underflow leading to buffer overflow vulnerability exists in a syscall handler. |
| CVE-2016-10339 | In all Android releases from CAF using the Linux kernel, HLOS can overwite secure memory or read contents of the keystore. |
| CVE-2016-10338 | In all Android releases from CAF using the Linux kernel, there was an issue related to RPMB processing. |
| CVE-2016-10337 | In all Android releases from CAF using the Linux kernel, some validation of secure applications was not being performed. |
| CVE-2016-10336 | In all Android releases from CAF using the Linux kernel, some regions of memory were not protected during boot. |
| CVE-2016-10335 | In all Android releases from CAF using the Linux kernel, libtomcrypt was updated. |
| CVE-2016-10334 | In all Android releases from CAF using the Linux kernel, a dynamically-protected DDR region could potentially get overwritten. |
| CVE-2016-10333 | In all Android releases from CAF using the Linux kernel, a sensitive system call was allowed to be called by HLOS. |
| CVE-2016-10332 | In all Android releases from CAF using the Linux kernel, stack protection was not enabled for secure applications. |
| CVE-2016-10318 | A missing authorization check in the fscrypt_process_policy function in fs/crypto/policy.c in the ext4 and f2fs filesystem encryption support in the Linux kernel before 4.7.4 allows a user to assign an encryption policy to a directory owned by a different user, potentially creating a denial of service. |
| CVE-2016-10297 | In TrustZone in all Android releases from CAF using the Linux kernel, a Time-of-Check Time-of-Use Race Condition vulnerability could potentially exist. |
| CVE-2016-10242 | A time-of-check time-of-use race condition could potentially exist in the secure file system in all Android releases from CAF using the Linux kernel. |
| CVE-2016-10239 | In TrustZone access control policy may potentially be bypassed in all Android releases from CAF using the Linux kernel due to improper input validation an integer overflow vulnerability leading to a buffer overflow could potentially occur and a buffer over-read vulnerability could potentially occur. |
| CVE-2016-10238 | In QSEE in all Android releases from CAF using the Linux kernel access control may potentially be bypassed due to a page alignment issue. |
| CVE-2016-10237 | If shared content protection memory were passed as the secure camera memory buffer by the HLOS to a trusted application (TA) in all Android releases from CAF using the Linux kernel, the TA would not detect an issue and it would be treated as secure memory. |
| CVE-2016-10229 | udp.c in the Linux kernel before 4.5 allows remote attackers to execute arbitrary code via UDP traffic that triggers an unsafe second checksum calculation during execution of a recv system call with the MSG_PEEK flag. |
| CVE-2016-10208 | The ext4_fill_super function in fs/ext4/super.c in the Linux kernel through 4.9.8 does not properly validate meta block groups, which allows physically proximate attackers to cause a denial of service (out-of-bounds read and system crash) via a crafted ext4 image. |
| CVE-2016-10200 | Race condition in the L2TPv3 IP Encapsulation feature in the Linux kernel before 4.8.14 allows local users to gain privileges or cause a denial of service (use-after-free) by making multiple bind system calls without properly ascertaining whether a socket has the SOCK_ZAPPED status, related to net/l2tp/l2tp_ip.c and net/l2tp/l2tp_ip6.c. |
| CVE-2016-10154 | The smbhash function in fs/cifs/smbencrypt.c in the Linux kernel 4.9.x before 4.9.1 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a scatterlist. |
| CVE-2016-10153 | The crypto scatterlist API in the Linux kernel 4.9.x before 4.9.6 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging reliance on earlier net/ceph/crypto.c code. |
| CVE-2016-10150 | Use-after-free vulnerability in the kvm_ioctl_create_device function in virt/kvm/kvm_main.c in the Linux kernel before 4.8.13 allows host OS users to cause a denial of service (host OS crash) or possibly gain privileges via crafted ioctl calls on the /dev/kvm device. |
| CVE-2016-10147 | crypto/mcryptd.c in the Linux kernel before 4.8.15 allows local users to cause a denial of service (NULL pointer dereference and system crash) by using an AF_ALG socket with an incompatible algorithm, as demonstrated by mcryptd(md5). |
| CVE-2016-10088 | The sg implementation in the Linux kernel through 4.9 does not properly restrict write operations in situations where the KERNEL_DS option is set, which allows local users to read or write to arbitrary kernel memory locations or cause a denial of service (use-after-free) by leveraging access to a /dev/sg device, related to block/bsg.c and drivers/scsi/sg.c. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-9576. |
| CVE-2016-10044 | The aio_mount function in fs/aio.c in the Linux kernel before 4.7.7 does not properly restrict execute access, which makes it easier for local users to bypass intended SELinux W^X policy restrictions, and consequently gain privileges, via an io_setup system call. |
| CVE-2016-0823 | The pagemap_open function in fs/proc/task_mmu.c in the Linux kernel before 3.19.3, as used in Android 6.0.1 before 2016-03-01, allows local users to obtain sensitive physical-address information by reading a pagemap file, aka Android internal bug 25739721. |
| CVE-2016-0821 | The LIST_POISON feature in include/linux/poison.h in the Linux kernel before 4.3, as used in Android 6.0.1 before 2016-03-01, does not properly consider the relationship to the mmap_min_addr value, which makes it easier for attackers to bypass a poison-pointer protection mechanism by triggering the use of an uninitialized list entry, aka Android internal bug 26186802, a different vulnerability than CVE-2015-3636. |
| CVE-2016-0774 | The (1) pipe_read and (2) pipe_write implementations in fs/pipe.c in a certain Linux kernel backport in the linux package before 3.2.73-2+deb7u3 on Debian wheezy and the kernel package before 3.10.0-229.26.2 on Red Hat Enterprise Linux (RHEL) 7.1 do not properly consider the side effects of failed __copy_to_user_inatomic and __copy_from_user_inatomic calls, which allows local users to cause a denial of service (system crash) or possibly gain privileges via a crafted application, aka an "I/O vector array overrun." NOTE: this vulnerability exists because of an incorrect fix for CVE-2015-1805. |
| CVE-2016-0758 | Integer overflow in lib/asn1_decoder.c in the Linux kernel before 4.6 allows local users to gain privileges via crafted ASN.1 data. |
| CVE-2016-0728 | The join_session_keyring function in security/keys/process_keys.c in the Linux kernel before 4.4.1 mishandles object references in a certain error case, which allows local users to gain privileges or cause a denial of service (integer overflow and use-after-free) via crafted keyctl commands. |
| CVE-2016-0723 | Race condition in the tty_ioctl function in drivers/tty/tty_io.c in the Linux kernel through 4.4.1 allows local users to obtain sensitive information from kernel memory or cause a denial of service (use-after-free and system crash) by making a TIOCGETD ioctl call during processing of a TIOCSETD ioctl call. |
| CVE-2016-0617 | Unspecified vulnerability in the kernel-uek component in Oracle Linux 6 allows local users to affect availability via unknown vectors. |
| CVE-2015-9289 | In the Linux kernel before 4.1.4, a buffer overflow occurs when checking userspace params in drivers/media/dvb-frontends/cx24116.c. The maximum size for a DiSEqC command is 6, according to the userspace API. However, the code allows larger values such as 23. |
| CVE-2015-9073 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an untrusted pointer dereference can occur in a TrustZone syscall. |
| CVE-2015-9072 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an untrusted pointer dereference can occur in a TrustZone syscall. |
| CVE-2015-9071 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer over-read vulnerability exists in a TrustZone syscall. |
| CVE-2015-9070 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer over-read vulnerability exists in a TrustZone syscall. |
| CVE-2015-9069 | In all Qualcomm products with Android releases from CAF using the Linux kernel, the Secure File System can become corrupted. |
| CVE-2015-9068 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an argument to a mink syscall is not properly validated. |
| CVE-2015-9067 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a potential compiler optimization of memset() is addressed. |
| CVE-2015-9066 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in an Inter-RAT procedure. |
| CVE-2015-9065 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a UE can respond to a UEInformationRequest before Access Stratum security is established. |
| CVE-2015-9064 | In all Qualcomm products with Android releases from CAF using the Linux kernel, the UE can send IMEI or IMEISV to the network on a network request before NAS security has been activated. |
| CVE-2015-9063 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in a procedure involving a remote UIM client. |
| CVE-2015-9062 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an integer overflow to buffer overflow vulnerability exists when loading an ELF file. |
| CVE-2015-9061 | In all Qualcomm products with Android releases from CAF using the Linux kernel, playReady DRM failed to check a length potentially leading to unauthorized access to secure memory. |
| CVE-2015-9060 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a pointer is not properly validated in a QTEE system call. |
| CVE-2015-9055 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an assertion was potentially reachable in a memory management routine. |
| CVE-2015-9054 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a NULL pointer can be dereferenced during GAL decoding. |
| CVE-2015-9053 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in the processing of certain responses from the USIM. |
| CVE-2015-9052 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a vulnerability exists in LTE where an assertion can be reached while processing a downlink message. |
| CVE-2015-9051 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a vulnerability exists in LTE where an assertion can be reached due to an improper bound on a length in a System Information message. |
| CVE-2015-9050 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a vulnerability exists where an array out of bounds access can occur during a CA call. |
| CVE-2015-9049 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a vulnerability exists in the processing of certain responses from the USIM. |
| CVE-2015-9048 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a vulnerability exists in the processing of lost RTP packets. |
| CVE-2015-9047 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a vulnerability exists in GNSS when performing a scan after bootup. |
| CVE-2015-9046 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a vulnerability exists in LTE where an assertion can be reached due to an improper bound on the size of a frequency list. |
| CVE-2015-9045 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a vulnerability exists in GERAN where a buffer can be overflown while taking power measurements. |
| CVE-2015-9044 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a vulnerability exists in LTE where an assertion can be reached due to an improper bound on the size of a frequency list. |
| CVE-2015-9043 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a NULL pointer can be dereferenced upon the expiry of a timer. |
| CVE-2015-9042 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists when processing a QMI message. |
| CVE-2015-9041 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists when performing WCDMA radio tuning. |
| CVE-2015-9040 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a vulnerability exists in a GERAN API. |
| CVE-2015-9039 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a vulnerability exists in eMBMS where an assertion can be reached by a sequence of downlink messages. |
| CVE-2015-9038 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a NULL pointer may be dereferenced in the front end. |
| CVE-2015-9037 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer over-read may occur in the processing of a downlink 3G NAS message. |
| CVE-2015-9036 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an incorrect length is used to clear a memory buffer resulting in adjacent memory getting corrupted. |
| CVE-2015-9035 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a memory buffer fails to be freed after it is no longer needed potentially resulting in memory exhaustion. |
| CVE-2015-9034 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a string can fail to be null-terminated in SIP leading to a buffer overflow. |
| CVE-2015-9033 | In all Android releases from CAF using the Linux kernel, a QTEE system call fails to validate a pointer. |
| CVE-2015-9032 | In all Android releases from CAF using the Linux kernel, a DRM key was exposed to QTEE applications. |
| CVE-2015-9031 | In all Android releases from CAF using the Linux kernel, a TZ memory address is exposed to HLOS by HDCP. |
| CVE-2015-9030 | In all Android releases from CAF using the Linux kernel, the Hypervisor API could be misused to bypass authentication. |
| CVE-2015-9029 | In all Android releases from CAF using the Linux kernel, a vulnerability exists in the access control settings of modem memory. |
| CVE-2015-9028 | In all Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in a cryptographic routine. |
| CVE-2015-9027 | In all Android releases from CAF using the Linux kernel, an untrusted pointer dereference vulnerability exists in WideVine DRM. |
| CVE-2015-9026 | In all Android releases from CAF using the Linux kernel, an untrusted pointer dereference vulnerability exists in WideVine DRM. |
| CVE-2015-9025 | In all Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in a QTEE application. |
| CVE-2015-9024 | In all Android releases from CAF using the Linux kernel, some interfaces were improperly exposed to QTEE applications. |
| CVE-2015-9023 | In all Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in the PlayReady API. |
| CVE-2015-9022 | In all Android releases from CAF using the Linux kernel, time-of-check Time-of-use (TOCTOU) Race Conditions exist in several TZ APIs. |
| CVE-2015-9021 | In all Android releases from CAF using the Linux kernel, access control to SMEM memory was not enabled. |
| CVE-2015-9020 | In all Android releases from CAF using the Linux kernel, an untrusted pointer dereference vulnerability exists in the unlocking of memory. |
| CVE-2015-9007 | In TrustZone in all Android releases from CAF using the Linux kernel, a Double Free vulnerability could potentially exist. |
| CVE-2015-9006 | In Resource Power Manager (RPM) in all Android releases from CAF using the Linux kernel, an Improper Access Control vulnerability could potentially exist. |
| CVE-2015-9005 | In TrustZone in all Android releases from CAF using the Linux kernel, an Integer Overflow to Buffer Overflow vulnerability could potentially exist. |
| CVE-2015-9004 | kernel/events/core.c in the Linux kernel before 3.19 mishandles counter grouping, which allows local users to gain privileges via a crafted application, related to the perf_pmu_register and perf_event_open functions. |
| CVE-2015-9003 | In TrustZone a cryptographic issue can potentially occur in all Android releases from CAF using the Linux kernel. |
| CVE-2015-9002 | In TrustZone an out-of-range pointer offset vulnerability can potentially occur in a DRM routine in all Android releases from CAF using the Linux kernel. |
| CVE-2015-9001 | In TrustZone an information exposure vulnerability can potentially occur in all Android releases from CAF using the Linux kernel. |
| CVE-2015-9000 | In TrustZone an untrusted pointer dereference vulnerability can potentially occur in a DRM routine in all Android releases from CAF using the Linux kernel. |
| CVE-2015-8999 | In TrustZone a buffer overflow vulnerability can potentially occur in all Android releases from CAF using the Linux kernel while loading an ELF file. |
| CVE-2015-8998 | In TrustZone an integer overflow vulnerability can potentially occur in all Android releases from CAF using the Linux kernel. |
| CVE-2015-8997 | In TrustZone a time-of-check time-of-use race condition could potentially exist in a listener routine in all Android releases from CAF using the Linux kernel. |
| CVE-2015-8996 | In TrustZone a time-of-check time-of-use race condition could potentially exist in a QFPROM routine in all Android releases from CAF using the Linux kernel. |
| CVE-2015-8995 | In TrustZone an integer overflow vulnerability can potentially occur in all Android releases from CAF using the Linux kernel. |
| CVE-2015-8970 | crypto/algif_skcipher.c in the Linux kernel before 4.4.2 does not verify that a setkey operation has been performed on an AF_ALG socket before an accept system call is processed, which allows local users to cause a denial of service (NULL pointer dereference and system crash) via a crafted application that does not supply a key, related to the lrw_crypt function in crypto/lrw.c. |
| CVE-2015-8967 | arch/arm64/kernel/sys.c in the Linux kernel before 4.0 allows local users to bypass the "strict page permissions" protection mechanism and modify the system-call table, and consequently gain privileges, by leveraging write access. |
| CVE-2015-8966 | arch/arm/kernel/sys_oabi-compat.c in the Linux kernel before 4.4 allows local users to gain privileges via a crafted (1) F_OFD_GETLK, (2) F_OFD_SETLK, or (3) F_OFD_SETLKW command in an fcntl64 system call. |
| CVE-2015-8964 | The tty_set_termios_ldisc function in drivers/tty/tty_ldisc.c in the Linux kernel before 4.5 allows local users to obtain sensitive information from kernel memory by reading a tty data structure. |
| CVE-2015-8963 | Race condition in kernel/events/core.c in the Linux kernel before 4.4 allows local users to gain privileges or cause a denial of service (use-after-free) by leveraging incorrect handling of an swevent data structure during a CPU unplug operation. |
| CVE-2015-8962 | Double free vulnerability in the sg_common_write function in drivers/scsi/sg.c in the Linux kernel before 4.4 allows local users to gain privileges or cause a denial of service (memory corruption and system crash) by detaching a device during an SG_IO ioctl call. |
| CVE-2015-8961 | The __ext4_journal_stop function in fs/ext4/ext4_jbd2.c in the Linux kernel before 4.3.3 allows local users to gain privileges or cause a denial of service (use-after-free) by leveraging improper access to a certain error field. |
| CVE-2015-8956 | The rfcomm_sock_bind function in net/bluetooth/rfcomm/sock.c in the Linux kernel before 4.2 allows local users to obtain sensitive information or cause a denial of service (NULL pointer dereference) via vectors involving a bind system call on a Bluetooth RFCOMM socket. |
| CVE-2015-8955 | arch/arm64/kernel/perf_event.c in the Linux kernel before 4.1 on arm64 platforms allows local users to gain privileges or cause a denial of service (invalid pointer dereference) via vectors involving events that are mishandled during a span of multiple HW PMUs. |
| CVE-2015-8953 | fs/overlayfs/copy_up.c in the Linux kernel before 4.2.6 uses an incorrect cleanup code path, which allows local users to cause a denial of service (dentry reference leak) via filesystem operations on a large file in a lower overlayfs layer. |
| CVE-2015-8952 | The mbcache feature in the ext2 and ext4 filesystem implementations in the Linux kernel before 4.6 mishandles xattr block caching, which allows local users to cause a denial of service (soft lockup) via filesystem operations in environments that use many attributes, as demonstrated by Ceph and Samba. |
| CVE-2015-8950 | arch/arm64/mm/dma-mapping.c in the Linux kernel before 4.0.3, as used in the ION subsystem in Android and other products, does not initialize certain data structures, which allows local users to obtain sensitive information from kernel memory by triggering a dma_mmap call. |
| CVE-2015-8944 | The ioresources_init function in kernel/resource.c in the Linux kernel through 4.7, as used in Android before 2016-08-05 on Nexus 6 and 7 (2013) devices, uses weak permissions for /proc/iomem, which allows local users to obtain sensitive information by reading this file, aka Android internal bug 28814213 and Qualcomm internal bug CR786116. NOTE: the permissions may be intentional in most non-Android contexts. |
| CVE-2015-8845 | The tm_reclaim_thread function in arch/powerpc/kernel/process.c in the Linux kernel before 4.4.1 on powerpc platforms does not ensure that TM suspend mode exists before proceeding with a tm_reclaim call, which allows local users to cause a denial of service (TM Bad Thing exception and panic) via a crafted application. |
| CVE-2015-8844 | The signal implementation in the Linux kernel before 4.3.5 on powerpc platforms does not check for an MSR with both the S and T bits set, which allows local users to cause a denial of service (TM Bad Thing exception and panic) via a crafted application. |
| CVE-2015-8839 | Multiple race conditions in the ext4 filesystem implementation in the Linux kernel before 4.5 allow local users to cause a denial of service (disk corruption) by writing to a page that is associated with a different user's file after unsynchronized hole punching and page-fault handling. |
| CVE-2015-8830 | Integer overflow in the aio_setup_single_vector function in fs/aio.c in the Linux kernel 4.0 allows local users to cause a denial of service or possibly have unspecified other impact via a large AIO iovec. NOTE: this vulnerability exists because of a CVE-2012-6701 regression. |
| CVE-2015-8816 | The hub_activate function in drivers/usb/core/hub.c in the Linux kernel before 4.3.5 does not properly maintain a hub-interface data structure, which allows physically proximate attackers to cause a denial of service (invalid memory access and system crash) or possibly have unspecified other impact by unplugging a USB hub device. |
| CVE-2015-8812 | drivers/infiniband/hw/cxgb3/iwch_cm.c in the Linux kernel before 4.5 does not properly identify error conditions, which allows remote attackers to execute arbitrary code or cause a denial of service (use-after-free) via crafted packets. |
| CVE-2015-8787 | The nf_nat_redirect_ipv4 function in net/netfilter/nf_nat_redirect.c in the Linux kernel before 4.4 allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by sending certain IPv4 packets to an incompletely configured interface, a related issue to CVE-2003-1604. |
| CVE-2015-8785 | The fuse_fill_write_pages function in fs/fuse/file.c in the Linux kernel before 4.4 allows local users to cause a denial of service (infinite loop) via a writev system call that triggers a zero length for the first segment of an iov. |
| CVE-2015-8767 | net/sctp/sm_sideeffect.c in the Linux kernel before 4.3 does not properly manage the relationship between a lock and a socket, which allows local users to cause a denial of service (deadlock) via a crafted sctp_accept call. |
| CVE-2015-8746 | fs/nfs/nfs4proc.c in the NFS client in the Linux kernel before 4.2.2 does not properly initialize memory for migration recovery operations, which allows remote NFS servers to cause a denial of service (NULL pointer dereference and panic) via crafted network traffic. |
| CVE-2015-8709 | ** DISPUTED ** kernel/ptrace.c in the Linux kernel through 4.4.1 mishandles uid and gid mappings, which allows local users to gain privileges by establishing a user namespace, waiting for a root process to enter that namespace with an unsafe uid or gid, and then using the ptrace system call. NOTE: the vendor states "there is no kernel bug here." |
| CVE-2015-8660 | The ovl_setattr function in fs/overlayfs/inode.c in the Linux kernel through 4.3.3 attempts to merge distinct setattr operations, which allows local users to bypass intended access restrictions and modify the attributes of arbitrary overlay files via a crafted application. |
| CVE-2015-8596 | In all Qualcomm products with Android releases from CAF using the Linux kernel, validation of buffer lengths is missing in malware protection. |
| CVE-2015-8595 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer over-read vulnerability exists in digital television/digital radio DRM. |
| CVE-2015-8594 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer over-read vulnerability exists in RFA-1x. |
| CVE-2015-8593 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in 1x call processing. |
| CVE-2015-8592 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a pointer is not validated prior to being dereferenced potentially resulting in Guest-OS memory corruption. |
| CVE-2015-8575 | The sco_sock_bind function in net/bluetooth/sco.c in the Linux kernel before 4.3.4 does not verify an address length, which allows local users to obtain sensitive information from kernel memory and bypass the KASLR protection mechanism via a crafted application. |
| CVE-2015-8569 | The (1) pptp_bind and (2) pptp_connect functions in drivers/net/ppp/pptp.c in the Linux kernel through 4.3.3 do not verify an address length, which allows local users to obtain sensitive information from kernel memory and bypass the KASLR protection mechanism via a crafted application. |
| CVE-2015-8553 | Xen allows guest OS users to obtain sensitive information from uninitialized locations in host OS kernel memory by not enabling memory and I/O decoding control bits. NOTE: this vulnerability exists because of an incomplete fix for CVE-2015-0777. |
| CVE-2015-8543 | The networking implementation in the Linux kernel through 4.3.3, as used in Android and other products, does not validate protocol identifiers for certain protocol families, which allows local users to cause a denial of service (NULL function pointer dereference and system crash) or possibly gain privileges by leveraging CLONE_NEWUSER support to execute a crafted SOCK_RAW application. |
| CVE-2015-8539 | The KEYS subsystem in the Linux kernel before 4.4 allows local users to gain privileges or cause a denial of service (BUG) via crafted keyctl commands that negatively instantiate a key, related to security/keys/encrypted-keys/encrypted.c, security/keys/trusted.c, and security/keys/user_defined.c. |
| CVE-2015-8374 | fs/btrfs/inode.c in the Linux kernel before 4.3.3 mishandles compressed inline extents, which allows local users to obtain sensitive pre-truncation information from a file via a clone action. |
| CVE-2015-8324 | The ext4 implementation in the Linux kernel before 2.6.34 does not properly track the initialization of certain data structures, which allows physically proximate attackers to cause a denial of service (NULL pointer dereference and panic) via a crafted USB device, related to the ext4_fill_super function. |
| CVE-2015-8215 | net/ipv6/addrconf.c in the IPv6 stack in the Linux kernel before 4.0 does not validate attempted changes to the MTU value, which allows context-dependent attackers to cause a denial of service (packet loss) via a value that is (1) smaller than the minimum compliant value or (2) larger than the MTU of an interface, as demonstrated by a Router Advertisement (RA) message that is not validated by a daemon, a different vulnerability than CVE-2015-0272. NOTE: the scope of CVE-2015-0272 is limited to the NetworkManager product. |
| CVE-2015-8104 | The KVM subsystem in the Linux kernel through 4.2.6, and Xen 4.3.x through 4.6.x, allows guest OS users to cause a denial of service (host OS panic or hang) by triggering many #DB (aka Debug) exceptions, related to svm.c. |
| CVE-2015-8019 | The skb_copy_and_csum_datagram_iovec function in net/core/datagram.c in the Linux kernel 3.14.54 and 3.18.22 does not accept a length argument, which allows local users to cause a denial of service (memory corruption) or possibly have unspecified other impact via a write system call followed by a recvmsg system call. |
| CVE-2015-7990 | Race condition in the rds_sendmsg function in net/rds/sendmsg.c in the Linux kernel before 4.3.3 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by using a socket that was not properly bound. NOTE: this vulnerability exists because of an incomplete fix for CVE-2015-6937. |
| CVE-2015-7885 | The dgnc_mgmt_ioctl function in drivers/staging/dgnc/dgnc_mgmt.c in the Linux kernel through 4.3.3 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel memory via a crafted application. |
| CVE-2015-7884 | The vivid_fb_ioctl function in drivers/media/platform/vivid/vivid-osd.c in the Linux kernel through 4.3.3 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel memory via a crafted application. |
| CVE-2015-7872 | The key_gc_unused_keys function in security/keys/gc.c in the Linux kernel through 4.2.6 allows local users to cause a denial of service (OOPS) via crafted keyctl commands. |
| CVE-2015-7869 | Multiple integer overflows in the kernel mode driver for the NVIDIA GPU graphics driver R340 before 341.92, R352 before 354.35, and R358 before 358.87 on Windows and R304 before 304.131, R340 before 340.96, R352 before 352.63, and R358 before 358.16 on Linux allow local users to obtain sensitive information, cause a denial of service (crash), or possibly gain privileges via unknown vectors, which trigger uninitialized or out of bounds memory access. NOTE: this identifier has been SPLIT per ADT2 and ADT3 due to different vulnerability type and affected versions. See CVE-2015-8328 for the vulnerability in the NVAPI support layer in NVIDIA drivers for Windows. |
| CVE-2015-7837 | The Linux kernel, as used in Red Hat Enterprise Linux 7, kernel-rt, and Enterprise MRG 2 and when booted with UEFI Secure Boot enabled, allows local users to bypass intended securelevel/secureboot restrictions by leveraging improper handling of secure_boot flag across kexec reboot. |
| CVE-2015-7833 | The usbvision driver in the Linux kernel package 3.10.0-123.20.1.el7 through 3.10.0-229.14.1.el7 in Red Hat Enterprise Linux (RHEL) 7.1 allows physically proximate attackers to cause a denial of service (panic) via a nonzero bInterfaceNumber value in a USB device descriptor. |
| CVE-2015-7799 | The slhc_init function in drivers/net/slip/slhc.c in the Linux kernel through 4.2.3 does not ensure that certain slot numbers are valid, which allows local users to cause a denial of service (NULL pointer dereference and system crash) via a crafted PPPIOCSMAXCID ioctl call. |
| CVE-2015-7613 | Race condition in the IPC object implementation in the Linux kernel through 4.2.3 allows local users to gain privileges by triggering an ipc_addid call that leads to uid and gid comparisons against uninitialized data, related to msg.c, shm.c, and util.c. |
| CVE-2015-7566 | The clie_5_attach function in drivers/usb/serial/visor.c in the Linux kernel through 4.4.1 allows physically proximate attackers to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by inserting a USB device that lacks a bulk-out endpoint. |
| CVE-2015-7553 | Race condition in the kernel in Red Hat Enterprise Linux 7, kernel-rt and Red Hat Enterprise MRG 2, when the nfnetlink_log module is loaded, allows local users to cause a denial of service (panic) by creating netlink sockets. |
| CVE-2015-7550 | The keyctl_read_key function in security/keys/keyctl.c in the Linux kernel before 4.3.4 does not properly use a semaphore, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a crafted application that leverages a race condition between keyctl_revoke and keyctl_read calls. |
| CVE-2015-7515 | The aiptek_probe function in drivers/input/tablet/aiptek.c in the Linux kernel before 4.4 allows physically proximate attackers to cause a denial of service (NULL pointer dereference and system crash) via a crafted USB device that lacks endpoints. |
| CVE-2015-7513 | arch/x86/kvm/x86.c in the Linux kernel before 4.4 does not reset the PIT counter values during state restoration, which allows guest OS users to cause a denial of service (divide-by-zero error and host OS crash) via a zero value, related to the kvm_vm_ioctl_set_pit and kvm_vm_ioctl_set_pit2 functions. |
| CVE-2015-7509 | fs/ext4/namei.c in the Linux kernel before 3.7 allows physically proximate attackers to cause a denial of service (system crash) via a crafted no-journal filesystem, a related issue to CVE-2013-2015. |
| CVE-2015-7312 | Multiple race conditions in the Advanced Union Filesystem (aufs) aufs3-mmap.patch and aufs4-mmap.patch patches for the Linux kernel 3.x and 4.x allow local users to cause a denial of service (use-after-free and BUG) or possibly gain privileges via a (1) madvise or (2) msync system call, related to mm/madvise.c and mm/msync.c. |
| CVE-2015-6937 | The __rds_conn_create function in net/rds/connection.c in the Linux kernel through 4.2.3 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by using a socket that was not properly bound. |
| CVE-2015-6526 | The perf_callchain_user_64 function in arch/powerpc/perf/callchain.c in the Linux kernel before 4.0.2 on ppc64 platforms allows local users to cause a denial of service (infinite loop) via a deep 64-bit userspace backtrace. |
| CVE-2015-6252 | The vhost_dev_ioctl function in drivers/vhost/vhost.c in the Linux kernel before 4.1.5 allows local users to cause a denial of service (memory consumption) via a VHOST_SET_LOG_FD ioctl call that triggers permanent file-descriptor allocation. |
| CVE-2015-5950 | The NVIDIA display driver R352 before 353.82 and R340 before 341.81 on Windows; R304 before 304.128, R340 before 340.93, and R352 before 352.41 on Linux; and R352 before 352.46 on GRID vGPU and vSGA allows local users to write to an arbitrary kernel memory location and consequently gain privileges via a crafted ioctl call. |
| CVE-2015-5707 | Integer overflow in the sg_start_req function in drivers/scsi/sg.c in the Linux kernel 2.6.x through 4.x before 4.1 allows local users to cause a denial of service or possibly have unspecified other impact via a large iov_count value in a write request. |
| CVE-2015-5706 | Use-after-free vulnerability in the path_openat function in fs/namei.c in the Linux kernel 3.x and 4.x before 4.0.4 allows local users to cause a denial of service or possibly have unspecified other impact via O_TMPFILE filesystem operations that leverage a duplicate cleanup operation. |
| CVE-2015-5697 | The get_bitmap_file function in drivers/md/md.c in the Linux kernel before 4.1.6 does not initialize a certain bitmap data structure, which allows local users to obtain sensitive information from kernel memory via a GET_BITMAP_FILE ioctl call. |
| CVE-2015-5366 | The (1) udp_recvmsg and (2) udpv6_recvmsg functions in the Linux kernel before 4.0.6 provide inappropriate -EAGAIN return values, which allows remote attackers to cause a denial of service (EPOLLET epoll application read outage) via an incorrect checksum in a UDP packet, a different vulnerability than CVE-2015-5364. |
| CVE-2015-5364 | The (1) udp_recvmsg and (2) udpv6_recvmsg functions in the Linux kernel before 4.0.6 do not properly consider yielding a processor, which allows remote attackers to cause a denial of service (system hang) via incorrect checksums within a UDP packet flood. |
| CVE-2015-5327 | Out-of-bounds memory read in the x509_decode_time function in x509_cert_parser.c in Linux kernels 4.3-rc1 and after. |
| CVE-2015-5307 | The KVM subsystem in the Linux kernel through 4.2.6, and Xen 4.3.x through 4.6.x, allows guest OS users to cause a denial of service (host OS panic or hang) by triggering many #AC (aka Alignment Check) exceptions, related to svm.c and vmx.c. |
| CVE-2015-5283 | The sctp_init function in net/sctp/protocol.c in the Linux kernel before 4.2.3 has an incorrect sequence of protocol-initialization steps, which allows local users to cause a denial of service (panic or memory corruption) by creating SCTP sockets before all of the steps have finished. |
| CVE-2015-5257 | drivers/usb/serial/whiteheat.c in the Linux kernel before 4.2.4 allows physically proximate attackers to cause a denial of service (NULL pointer dereference and OOPS) or possibly have unspecified other impact via a crafted USB device. NOTE: this ID was incorrectly used for an Apache Cordova issue that has the correct ID of CVE-2015-8320. |
| CVE-2015-5157 | arch/x86/entry/entry_64.S in the Linux kernel before 4.1.6 on the x86_64 platform mishandles IRET faults in processing NMIs that occurred during userspace execution, which might allow local users to gain privileges by triggering an NMI. |
| CVE-2015-5156 | The virtnet_probe function in drivers/net/virtio_net.c in the Linux kernel before 4.2 attempts to support a FRAGLIST feature without proper memory allocation, which allows guest OS users to cause a denial of service (buffer overflow and memory corruption) via a crafted sequence of fragmented packets. |
| CVE-2015-5053 | The host memory mapping path feature in the NVIDIA GPU graphics driver R346 before 346.87 and R352 before 352.41 for Linux and R352 before 352.46 for GRID vGPU and vSGA does not properly restrict access to third-party device IO memory, which allows attackers to gain privileges, cause a denial of service (resource consumption), or possibly have unspecified other impact via unknown vectors related to the follow_pfn kernel-mode API call. |
| CVE-2015-4700 | The bpf_int_jit_compile function in arch/x86/net/bpf_jit_comp.c in the Linux kernel before 4.0.6 allows local users to cause a denial of service (system crash) by creating a packet filter and then loading crafted BPF instructions that trigger late convergence by the JIT compiler. |
| CVE-2015-4692 | The kvm_apic_has_events function in arch/x86/kvm/lapic.h in the Linux kernel through 4.1.3 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by leveraging /dev/kvm access for an ioctl call. |
| CVE-2015-4178 | The fs_pin implementation in the Linux kernel before 4.0.5 does not ensure the internal consistency of a certain list data structure, which allows local users to cause a denial of service (system crash) by leveraging user-namespace root access for an MNT_DETACH umount2 system call, related to fs/fs_pin.c and include/linux/fs_pin.h. |
| CVE-2015-4177 | The collect_mounts function in fs/namespace.c in the Linux kernel before 4.0.5 does not properly consider that it may execute after a path has been unmounted, which allows local users to cause a denial of service (system crash) by leveraging user-namespace root access for an MNT_DETACH umount2 system call. |
| CVE-2015-4176 | fs/namespace.c in the Linux kernel before 4.0.2 does not properly support mount connectivity, which allows local users to read arbitrary files by leveraging user-namespace root access for deletion of a file or directory. |
| CVE-2015-4170 | Race condition in the ldsem_cmpxchg function in drivers/tty/tty_ldsem.c in the Linux kernel before 3.13-rc4-next-20131218 allows local users to cause a denial of service (ldsem_down_read and ldsem_down_write deadlock) by establishing a new tty thread during shutdown of a previous tty thread. |
| CVE-2015-4167 | The udf_read_inode function in fs/udf/inode.c in the Linux kernel before 3.19.1 does not validate certain length values, which allows local users to cause a denial of service (incorrect data representation or integer overflow, and OOPS) via a crafted UDF filesystem. |
| CVE-2015-4036 | Array index error in the tcm_vhost_make_tpg function in drivers/vhost/scsi.c in the Linux kernel before 4.0 might allow guest OS users to cause a denial of service (memory corruption) or possibly have unspecified other impact via a crafted VHOST_SCSI_SET_ENDPOINT ioctl call. NOTE: the affected function was renamed to vhost_scsi_make_tpg before the vulnerability was announced. |
| CVE-2015-4004 | The OZWPAN driver in the Linux kernel through 4.0.5 relies on an untrusted length field during packet parsing, which allows remote attackers to obtain sensitive information from kernel memory or cause a denial of service (out-of-bounds read and system crash) via a crafted packet. |
| CVE-2015-4003 | The oz_usb_handle_ep_data function in drivers/staging/ozwpan/ozusbsvc1.c in the OZWPAN driver in the Linux kernel through 4.0.5 allows remote attackers to cause a denial of service (divide-by-zero error and system crash) via a crafted packet. |
| CVE-2015-4002 | drivers/staging/ozwpan/ozusbsvc1.c in the OZWPAN driver in the Linux kernel through 4.0.5 does not ensure that certain length values are sufficiently large, which allows remote attackers to cause a denial of service (system crash or large loop) or possibly execute arbitrary code via a crafted packet, related to the (1) oz_usb_rx and (2) oz_usb_handle_ep_data functions. |
| CVE-2015-4001 | Integer signedness error in the oz_hcd_get_desc_cnf function in drivers/staging/ozwpan/ozhcd.c in the OZWPAN driver in the Linux kernel through 4.0.5 allows remote attackers to cause a denial of service (system crash) or possibly execute arbitrary code via a crafted packet. |
| CVE-2015-3636 | The ping_unhash function in net/ipv4/ping.c in the Linux kernel before 4.0.3 does not initialize a certain list data structure during an unhash operation, which allows local users to gain privileges or cause a denial of service (use-after-free and system crash) by leveraging the ability to make a SOCK_DGRAM socket system call for the IPPROTO_ICMP or IPPROTO_ICMPV6 protocol, and then making a connect system call after a disconnect. |
| CVE-2015-3339 | Race condition in the prepare_binprm function in fs/exec.c in the Linux kernel before 3.19.6 allows local users to gain privileges by executing a setuid program at a time instant when a chown to root is in progress, and the ownership is changed but the setuid bit is not yet stripped. |
| CVE-2015-3332 | A certain backport in the TCP Fast Open implementation for the Linux kernel before 3.18 does not properly maintain a count value, which allow local users to cause a denial of service (system crash) via the Fast Open feature, as demonstrated by visiting the chrome://flags/#enable-tcp-fast-open URL when using certain 3.10.x through 3.16.x kernel builds, including longterm-maintenance releases and ckt (aka Canonical Kernel Team) builds. |
| CVE-2015-3331 | The __driver_rfc4106_decrypt function in arch/x86/crypto/aesni-intel_glue.c in the Linux kernel before 3.19.3 does not properly determine the memory locations used for encrypted data, which allows context-dependent attackers to cause a denial of service (buffer overflow and system crash) or possibly execute arbitrary code by triggering a crypto API call, as demonstrated by use of a libkcapi test program with an AF_ALG(aead) socket. |
| CVE-2015-3291 | arch/x86/entry/entry_64.S in the Linux kernel before 4.1.6 on the x86_64 platform does not properly determine when nested NMI processing is occurring, which allows local users to cause a denial of service (skipped NMI) by modifying the rsp register, issuing a syscall instruction, and triggering an NMI. |
| CVE-2015-3290 | arch/x86/entry/entry_64.S in the Linux kernel before 4.1.6 on the x86_64 platform improperly relies on espfix64 during nested NMI processing, which allows local users to gain privileges by triggering an NMI within a certain instruction window. |
| CVE-2015-3288 | mm/memory.c in the Linux kernel before 4.1.4 mishandles anonymous pages, which allows local users to gain privileges or cause a denial of service (page tainting) via a crafted application that triggers writing to page zero. |
| CVE-2015-3214 | The pit_ioport_read in i8254.c in the Linux kernel before 2.6.33 and QEMU before 2.3.1 does not distinguish between read lengths and write lengths, which might allow guest OS users to execute arbitrary code on the host OS by triggering use of an invalid index. |
| CVE-2015-3212 | Race condition in net/sctp/socket.c in the Linux kernel before 4.1.2 allows local users to cause a denial of service (list corruption and panic) via a rapid series of system calls related to sockets, as demonstrated by setsockopt calls. |
| CVE-2015-3036 | Stack-based buffer overflow in the run_init_sbus function in the KCodes NetUSB module for the Linux kernel, as used in certain NETGEAR products, TP-LINK products, and other products, allows remote attackers to execute arbitrary code by providing a long computer name in a session on TCP port 20005. |
| CVE-2015-2925 | The prepend_path function in fs/dcache.c in the Linux kernel before 4.2.4 does not properly handle rename actions inside a bind mount, which allows local users to bypass an intended container protection mechanism by renaming a directory, related to a "double-chroot attack." |
| CVE-2015-2922 | The ndisc_router_discovery function in net/ipv6/ndisc.c in the Neighbor Discovery (ND) protocol implementation in the IPv6 stack in the Linux kernel before 3.19.6 allows remote attackers to reconfigure a hop-limit setting via a small hop_limit value in a Router Advertisement (RA) message. |
| CVE-2015-2877 | ** DISPUTED ** Kernel Samepage Merging (KSM) in the Linux kernel 2.6.32 through 4.x does not prevent use of a write-timing side channel, which allows guest OS users to defeat the ASLR protection mechanism on other guest OS instances via a Cross-VM ASL INtrospection (CAIN) attack. NOTE: the vendor states "Basically if you care about this attack vector, disable deduplication." Share-until-written approaches for memory conservation among mutually untrusting tenants are inherently detectable for information disclosure, and can be classified as potentially misunderstood behaviors rather than vulnerabilities. |
| CVE-2015-2830 | arch/x86/kernel/entry_64.S in the Linux kernel before 3.19.2 does not prevent the TS_COMPAT flag from reaching a user-mode task, which might allow local users to bypass the seccomp or audit protection mechanism via a crafted application that uses the (1) fork or (2) close system call, as demonstrated by an attack against seccomp before 3.16. |
| CVE-2015-2686 | net/socket.c in the Linux kernel 3.19 before 3.19.3 does not validate certain range data for (1) sendto and (2) recvfrom system calls, which allows local users to gain privileges by leveraging a subsystem that uses the copy_from_iter function in the iov_iter interface, as demonstrated by the Bluetooth subsystem. |
| CVE-2015-2672 | The xsave/xrstor implementation in arch/x86/include/asm/xsave.h in the Linux kernel before 3.19.2 creates certain .altinstr_replacement pointers and consequently does not provide any protection against instruction faulting, which allows local users to cause a denial of service (panic) by triggering a fault, as demonstrated by an unaligned memory operand or a non-canonical address memory operand. |
| CVE-2015-2666 | Stack-based buffer overflow in the get_matching_model_microcode function in arch/x86/kernel/cpu/microcode/intel_early.c in the Linux kernel before 4.0 allows context-dependent attackers to gain privileges by constructing a crafted microcode header and leveraging root privileges for write access to the initrd. |
| CVE-2015-2150 | Xen 3.3.x through 4.5.x and the Linux kernel through 3.19.1 do not properly restrict access to PCI command registers, which might allow local guest OS users to cause a denial of service (non-maskable interrupt and host crash) by disabling the (1) memory or (2) I/O decoding for a PCI Express device and then accessing the device, which triggers an Unsupported Request (UR) response. |
| CVE-2015-2042 | net/rds/sysctl.c in the Linux kernel before 3.19 uses an incorrect data type in a sysctl table, which allows local users to obtain potentially sensitive information from kernel memory or possibly have unspecified other impact by accessing a sysctl entry. |
| CVE-2015-2041 | net/llc/sysctl_net_llc.c in the Linux kernel before 3.19 uses an incorrect data type in a sysctl table, which allows local users to obtain potentially sensitive information from kernel memory or possibly have unspecified other impact by accessing a sysctl entry. |
| CVE-2015-1805 | The (1) pipe_read and (2) pipe_write implementations in fs/pipe.c in the Linux kernel before 3.16 do not properly consider the side effects of failed __copy_to_user_inatomic and __copy_from_user_inatomic calls, which allows local users to cause a denial of service (system crash) or possibly gain privileges via a crafted application, aka an "I/O vector array overrun." |
| CVE-2015-1593 | The stack randomization feature in the Linux kernel before 3.19.1 on 64-bit platforms uses incorrect data types for the results of bitwise left-shift operations, which makes it easier for attackers to bypass the ASLR protection mechanism by predicting the address of the top of the stack, related to the randomize_stack_top function in fs/binfmt_elf.c and the stack_maxrandom_size function in arch/x86/mm/mmap.c. |
| CVE-2015-1573 | The nft_flush_table function in net/netfilter/nf_tables_api.c in the Linux kernel before 3.18.5 mishandles the interaction between cross-chain jumps and ruleset flushes, which allows local users to cause a denial of service (panic) by leveraging the CAP_NET_ADMIN capability. |
| CVE-2015-1465 | The IPv4 implementation in the Linux kernel before 3.18.8 does not properly consider the length of the Read-Copy Update (RCU) grace period for redirecting lookups in the absence of caching, which allows remote attackers to cause a denial of service (memory consumption or system crash) via a flood of packets. |
| CVE-2015-1421 | Use-after-free vulnerability in the sctp_assoc_update function in net/sctp/associola.c in the Linux kernel before 3.18.8 allows remote attackers to cause a denial of service (slab corruption and panic) or possibly have unspecified other impact by triggering an INIT collision that leads to improper handling of shared-key data. |
| CVE-2015-1420 | Race condition in the handle_to_path function in fs/fhandle.c in the Linux kernel through 3.19.1 allows local users to bypass intended size restrictions and trigger read operations on additional memory locations by changing the handle_bytes value of a file handle during the execution of this function. |
| CVE-2015-1350 | The VFS subsystem in the Linux kernel 3.x provides an incomplete set of requirements for setattr operations that underspecifies removing extended privilege attributes, which allows local users to cause a denial of service (capability stripping) via a failed invocation of a system call, as demonstrated by using chown to remove a capability from the ping or Wireshark dumpcap program. |
| CVE-2015-1339 | Memory leak in the cuse_channel_release function in fs/fuse/cuse.c in the Linux kernel before 4.4 allows local users to cause a denial of service (memory consumption) or possibly have unspecified other impact by opening /dev/cuse many times. |
| CVE-2015-1336 | The daily mandb cleanup job in Man-db before 2.7.6.1-1 as packaged in Ubuntu and Debian allows local users with access to the man account to gain privileges via vectors involving insecure chown use. |
| CVE-2015-1333 | Memory leak in the __key_link_end function in security/keys/keyring.c in the Linux kernel before 4.1.4 allows local users to cause a denial of service (memory consumption) via many add_key system calls that refer to existing keys. |
| CVE-2015-1328 | The overlayfs implementation in the linux (aka Linux kernel) package before 3.19.0-21.21 in Ubuntu through 15.04 does not properly check permissions for file creation in the upper filesystem directory, which allows local users to obtain root access by leveraging a configuration in which overlayfs is permitted in an arbitrary mount namespace. |
| CVE-2015-1142857 | On multiple SR-IOV cars it is possible for VF's assigned to guests to send ethernet flow control pause frames via the PF. This includes Linux kernel ixgbe driver before commit f079fa005aae08ee0e1bc32699874ff4f02e11c1, the Linux Kernel i40e/i40evf driver before e7358f54a3954df16d4f87e3cad35063f1c17de5 and the DPDK before commit 3f12b9f23b6499ff66ec8b0de941fb469297e5d0, additionally Multiple vendor NIC firmware is affected. |
| CVE-2015-0777 | drivers/xen/usbback/usbback.c in linux-2.6.18-xen-3.4.0 (aka the Xen 3.4.x support patches for the Linux kernel 2.6.18), as used in the Linux kernel 2.6.x and 3.x in SUSE Linux distributions, allows guest OS users to obtain sensitive information from uninitialized locations in host OS kernel memory via unspecified vectors. |
| CVE-2015-0576 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in HSDPA. |
| CVE-2015-0575 | In all Qualcomm products with Android releases from CAF using the Linux kernel, insecure ciphersuites were included in the default configuration. |
| CVE-2015-0574 | In all Qualcomm products with Android releases from CAF using the Linux kernel, the validation of filesystem access was insufficient. |
| CVE-2015-0573 | drivers/media/platform/msm/broadcast/tsc.c in the TSC driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to cause a denial of service (invalid pointer dereference) or possibly have unspecified other impact via a crafted application that makes a TSC_GET_CARD_STATUS ioctl call. |
| CVE-2015-0572 | Multiple race conditions in drivers/char/adsprpc.c and drivers/char/adsprpc_compat.c in the ADSPRPC driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allow attackers to cause a denial of service (zero-value write) or possibly have unspecified other impact via a COMPAT_FASTRPC_IOCTL_INVOKE_FD ioctl call. |
| CVE-2015-0571 | The WLAN (aka Wi-Fi) driver for the Linux kernel 3.x and 4.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, does not verify authorization for private SET IOCTL calls, which allows attackers to gain privileges via a crafted application, related to wlan_hdd_hostapd.c and wlan_hdd_wext.c. |
| CVE-2015-0570 | Stack-based buffer overflow in the SET_WPS_IE IOCTL implementation in wlan_hdd_hostapd.c in the WLAN (aka Wi-Fi) driver for the Linux kernel 3.x and 4.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to gain privileges via a crafted application that uses a long WPS IE element. |
| CVE-2015-0569 | Heap-based buffer overflow in the private wireless extensions IOCTL implementation in wlan_hdd_wext.c in the WLAN (aka Wi-Fi) driver for the Linux kernel 3.x and 4.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to gain privileges via a crafted application that establishes a packet filter. |
| CVE-2015-0568 | Use-after-free vulnerability in the msm_set_crop function in drivers/media/video/msm/msm_camera.c in the MSM-Camera driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to gain privileges or cause a denial of service (memory corruption) via an application that makes a crafted ioctl call. |
| CVE-2015-0275 | The ext4_zero_range function in fs/ext4/extents.c in the Linux kernel before 4.1 allows local users to cause a denial of service (BUG) via a crafted fallocate zero-range request. |
| CVE-2015-0274 | The XFS implementation in the Linux kernel before 3.15 improperly uses an old size value during remote attribute replacement, which allows local users to cause a denial of service (transaction overrun and data corruption) or possibly gain privileges by leveraging XFS filesystem access. |
| CVE-2015-0239 | The em_sysenter function in arch/x86/kvm/emulate.c in the Linux kernel before 3.18.5, when the guest OS lacks SYSENTER MSR initialization, allows guest OS users to gain guest OS privileges or cause a denial of service (guest OS crash) by triggering use of a 16-bit code segment for emulation of a SYSENTER instruction. |
| CVE-2015-0199 | The mmfslinux kernel module in IBM General Parallel File System (GPFS) 3.4 before 3.4.0.32, 3.5 before 3.5.0.24, and 4.1 before 4.1.0.7 allows local users to cause a denial of service (memory corruption) via unspecified character-device ioctl calls. |
| CVE-2014-9981 | In all Qualcomm products with Android releases from CAF using the Linux kernel, an overflow check in the USB interface was insufficient during boot. |
| CVE-2014-9980 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a Sample App failed to check a length potentially leading to unauthorized access to secure memory. |
| CVE-2014-9979 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a variable is uninitialized in a TrustZone system call potentially leading to the compromise of secure memory. |
| CVE-2014-9978 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in a QTEE service. |
| CVE-2014-9977 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in PlayReady DRM. |
| CVE-2014-9976 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in 1x call processing. |
| CVE-2014-9975 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a rollback vulnerability potentially exists in Full Disk Encryption. |
| CVE-2014-9974 | In all Qualcomm products with Android releases from CAF using the Linux kernel, validation of buffer lengths was missing in Keymaster. |
| CVE-2014-9973 | In all Qualcomm products with Android releases from CAF using the Linux kernel, validation of a buffer length was missing in a PlayReady DRM routine. |
| CVE-2014-9972 | In all Qualcomm products with Android releases from CAF using the Linux kernel, disabling asserts can potentially cause a NULL pointer dereference during an out-of-memory condition. |
| CVE-2014-9971 | In all Qualcomm products with Android releases from CAF using the Linux kernel, disabling asserts causes an instruction inside of an assert to not be executed resulting in incorrect control flow. |
| CVE-2014-9969 | In all Qualcomm products with Android releases from CAF using the Linux kernel, the GPS client may use an insecure cryptographic algorithm. |
| CVE-2014-9968 | In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in the UIMDIAG interface. |
| CVE-2014-9967 | In all Android releases from CAF using the Linux kernel, an untrusted pointer dereference vulnerability exists in WideVine DRM. |
| CVE-2014-9966 | In all Android releases from CAF using the Linux kernel, a Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability exists in Secure Display. |
| CVE-2014-9965 | In all Android releases from CAF using the Linux kernel, a vulnerability exists in the parsing of an SCM call. |
| CVE-2014-9964 | In all Android releases from CAF using the Linux kernel, an integer overflow vulnerability exists in debug functionality. |
| CVE-2014-9963 | In all Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in WideVine DRM. |
| CVE-2014-9962 | In all Android releases from CAF using the Linux kernel, a vulnerability exists in the parsing of a DRM provisioning command. |
| CVE-2014-9961 | In all Android releases from CAF using the Linux kernel, a vulnerability in eMMC write protection exists that can be used to bypass power-on write protection. |
| CVE-2014-9960 | In all Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in the PlayReady API. |
| CVE-2014-9952 | In the Secure File System in all Android releases from CAF using the Linux kernel, a capture-replay vulnerability could potentially exist. |
| CVE-2014-9951 | In TrustZone in all Android releases from CAF using the Linux kernel, an Information Exposure Through Timing Discrepancy vulnerability could potentially exist. |
| CVE-2014-9950 | In Core Kernel in all Android releases from CAF using the Linux kernel, an Improper Authorization vulnerability could potentially exist. |
| CVE-2014-9949 | In TrustZone in all Android releases from CAF using the Linux kernel, an Untrusted Pointer Dereference vulnerability could potentially exist. |
| CVE-2014-9948 | In TrustZone in all Android releases from CAF using the Linux kernel, an Improper Validation of Array Index vulnerability could potentially exist. |
| CVE-2014-9947 | In TrustZone in all Android releases from CAF using the Linux kernel, an Information Exposure vulnerability could potentially exist. |
| CVE-2014-9946 | In Core Kernel in all Android releases from CAF using the Linux kernel, a Use After Free vulnerability could potentially exist. |
| CVE-2014-9945 | In TrustZone in all Android releases from CAF using the Linux kernel, an Improper Authorization vulnerability could potentially exist. |
| CVE-2014-9944 | In the Secure File System in all Android releases from CAF using the Linux kernel, an Integer Overflow to Buffer Overflow vulnerability could potentially exist. |
| CVE-2014-9943 | In Core Kernel in all Android releases from CAF using the Linux kernel, a Null Pointer Dereference vulnerability could potentially exist. |
| CVE-2014-9942 | In Boot in all Android releases from CAF using the Linux kernel, a Use of Uninitialized Variable vulnerability could potentially exist. |
| CVE-2014-9941 | In the Embedded File System in all Android releases from CAF using the Linux kernel, a Time-of-Check Time-of-Use Race Condition vulnerability could potentially exist. |
| CVE-2014-9940 | The regulator_ena_gpio_free function in drivers/regulator/core.c in the Linux kernel before 3.19 allows local users to gain privileges or cause a denial of service (use-after-free) via a crafted application. |
| CVE-2014-9937 | In TrustZone a buffer overflow vulnerability can potentially occur in a DRM routine in all Android releases from CAF using the Linux kernel. |
| CVE-2014-9936 | In TrustZone a time-of-check time-of-use race condition could potentially exist in an authentication routine in all Android releases from CAF using the Linux kernel. |
| CVE-2014-9935 | In TrustZone an integer overflow vulnerability leading to a buffer overflow could potentially occur in a DRM routine in all Android releases from CAF using the Linux kernel. |
| CVE-2014-9934 | A PKCS#1 v1.5 signature verification routine in all Android releases from CAF using the Linux kernel may not check padding. |
| CVE-2014-9933 | Due to missing input validation in all Android releases from CAF using the Linux kernel, HLOS can write to fuses for which it should not have access. |
| CVE-2014-9932 | In TrustZone, an integer overflow vulnerability can potentially occur in all Android releases from CAF using the Linux kernel due to an improper address range computation. |
| CVE-2014-9931 | A buffer overflow vulnerability in all Android releases from CAF using the Linux kernel can potentially occur if an OEM performs an app region size customization due to a hard-coded value. |
| CVE-2014-9930 | In WCDMA in all Android releases from CAF using the Linux kernel, a Use After Free vulnerability could potentially exist. |
| CVE-2014-9929 | In WCDMA in all Android releases from CAF using the Linux kernel, a Use of Out-of-range Pointer Offset vulnerability could potentially exist. |
| CVE-2014-9928 | In GERAN in all Android releases from CAF using the Linux kernel, a Buffer Copy without Checking Size of Input vulnerability could potentially exist. |
| CVE-2014-9927 | In UIM in all Android releases from CAF using the Linux kernel, a Buffer Copy without Checking Size of Input vulnerability could potentially exist. |
| CVE-2014-9926 | In GNSS in all Android releases from CAF using the Linux kernel, a Use After Free vulnerability could potentially exist. |
| CVE-2014-9925 | In HDR in all Android releases from CAF using the Linux kernel, a Buffer Copy without Checking Size of Input vulnerability could potentially exist. |
| CVE-2014-9924 | In 1x in all Android releases from CAF using the Linux kernel, a Signed to Unsigned Conversion Error could potentially occur. |
| CVE-2014-9923 | In NAS in all Android releases from CAF using the Linux kernel, a Buffer Copy without Checking Size of Input vulnerability could potentially exist. |
| CVE-2014-9922 | The eCryptfs subsystem in the Linux kernel before 3.18 allows local users to gain privileges via a large filesystem stack that includes an overlayfs layer, related to fs/ecryptfs/main.c and fs/overlayfs/super.c. |
| CVE-2014-9914 | Race condition in the ip4_datagram_release_cb function in net/ipv4/datagram.c in the Linux kernel before 3.15.2 allows local users to gain privileges or cause a denial of service (use-after-free) by leveraging incorrect expectations about locking during multithreaded access to internal data structures for IPv4 UDP sockets. |
| CVE-2014-9904 | The snd_compress_check_input function in sound/core/compress_offload.c in the ALSA subsystem in the Linux kernel before 3.17 does not properly check for an integer overflow, which allows local users to cause a denial of service (insufficient memory allocation) or possibly have unspecified other impact via a crafted SNDRV_COMPRESS_SET_PARAMS ioctl call. |
| CVE-2014-9903 | The sched_read_attr function in kernel/sched/core.c in the Linux kernel 3.14-rc before 3.14-rc4 uses an incorrect size, which allows local users to obtain sensitive information from kernel stack memory via a crafted sched_getattr system call. |
| CVE-2014-9900 | The ethtool_get_wol function in net/core/ethtool.c in the Linux kernel through 4.7, as used in Android before 2016-08-05 on Nexus 5 and 7 (2013) devices, does not initialize a certain data structure, which allows local users to obtain sensitive information via a crafted application, aka Android internal bug 28803952 and Qualcomm internal bug CR570754. |
| CVE-2014-9895 | drivers/media/media-device.c in the Linux kernel before 3.11, as used in Android before 2016-08-05 on Nexus 5 and 7 (2013) devices, does not properly initialize certain data structures, which allows local users to obtain sensitive information via a crafted application, aka Android internal bug 28750150 and Qualcomm internal bug CR570757, a different vulnerability than CVE-2014-1739. |
| CVE-2014-9892 | The snd_compr_tstamp function in sound/core/compress_offload.c in the Linux kernel through 4.7, as used in Android before 2016-08-05 on Nexus 5 and 7 (2013) devices, does not properly initialize a timestamp data structure, which allows attackers to obtain sensitive information via a crafted application, aka Android internal bug 28770164 and Qualcomm internal bug CR568717. |
| CVE-2014-9888 | arch/arm/mm/dma-mapping.c in the Linux kernel before 3.13 on ARM platforms, as used in Android before 2016-08-05 on Nexus 5 and 7 (2013) devices, does not prevent executable DMA mappings, which might allow local users to gain privileges via a crafted application, aka Android internal bug 28803642 and Qualcomm internal bug CR642735. |
| CVE-2014-9870 | The Linux kernel before 3.11 on ARM platforms, as used in Android before 2016-08-05 on Nexus 5 and 7 (2013) devices, does not properly consider user-space access to the TPIDRURW register, which allows local users to gain privileges via a crafted application, aka Android internal bug 28749743 and Qualcomm internal bug CR561044. |
| CVE-2014-9803 | arch/arm64/include/asm/pgtable.h in the Linux kernel before 3.15-rc5-next-20140519, as used in Android before 2016-07-05 on Nexus 5X and 6P devices, mishandles execute-only pages, which allows attackers to gain privileges via a crafted application, aka Android internal bug 28557020. |
| CVE-2014-9731 | The UDF filesystem implementation in the Linux kernel before 3.18.2 does not ensure that space is available for storing a symlink target's name along with a trailing \0 character, which allows local users to obtain sensitive information via a crafted filesystem image, related to fs/udf/symlink.c and fs/udf/unicode.c. |
| CVE-2014-9730 | The udf_pc_to_char function in fs/udf/symlink.c in the Linux kernel before 3.18.2 relies on component lengths that are unused, which allows local users to cause a denial of service (system crash) via a crafted UDF filesystem image. |
| CVE-2014-9729 | The udf_read_inode function in fs/udf/inode.c in the Linux kernel before 3.18.2 does not ensure a certain data-structure size consistency, which allows local users to cause a denial of service (system crash) via a crafted UDF filesystem image. |
| CVE-2014-9728 | The UDF filesystem implementation in the Linux kernel before 3.18.2 does not validate certain lengths, which allows local users to cause a denial of service (buffer over-read and system crash) via a crafted filesystem image, related to fs/udf/inode.c and fs/udf/symlink.c. |
| CVE-2014-9717 | fs/namespace.c in the Linux kernel before 4.0.2 processes MNT_DETACH umount2 system calls without verifying that the MNT_LOCKED flag is unset, which allows local users to bypass intended access restrictions and navigate to filesystem locations beneath a mount by calling umount2 within a user namespace. |
| CVE-2014-9715 | include/net/netfilter/nf_conntrack_extend.h in the netfilter subsystem in the Linux kernel before 3.14.5 uses an insufficiently large data type for certain extension data, which allows local users to cause a denial of service (NULL pointer dereference and OOPS) via outbound network traffic that triggers extension loading, as demonstrated by configuring a PPTP tunnel in a NAT environment. |
| CVE-2014-9710 | The Btrfs implementation in the Linux kernel before 3.19 does not ensure that the visible xattr state is consistent with a requested replacement, which allows local users to bypass intended ACL settings and gain privileges via standard filesystem operations (1) during an xattr-replacement time window, related to a race condition, or (2) after an xattr-replacement attempt that fails because the data does not fit. |
| CVE-2014-9687 | eCryptfs 104 and earlier uses a default salt to encrypt the mount passphrase, which makes it easier for attackers to obtain user passwords via a brute force attack. |
| CVE-2014-9683 | Off-by-one error in the ecryptfs_decode_from_filename function in fs/ecryptfs/crypto.c in the eCryptfs subsystem in the Linux kernel before 3.18.2 allows local users to cause a denial of service (buffer overflow and system crash) or possibly gain privileges via a crafted filename. |
| CVE-2014-9645 | The add_probe function in modutils/modprobe.c in BusyBox before 1.23.0 allows local users to bypass intended restrictions on loading kernel modules via a / (slash) character in a module name, as demonstrated by an "ifconfig /usbserial up" command or a "mount -t /snd_pcm none /" command. |
| CVE-2014-9644 | The Crypto API in the Linux kernel before 3.18.5 allows local users to load arbitrary kernel modules via a bind system call for an AF_ALG socket with a parenthesized module template expression in the salg_name field, as demonstrated by the vfat(aes) expression, a different vulnerability than CVE-2013-7421. |
| CVE-2014-9585 | The vdso_addr function in arch/x86/vdso/vma.c in the Linux kernel through 3.18.2 does not properly choose memory locations for the vDSO area, which makes it easier for local users to bypass the ASLR protection mechanism by guessing a location at the end of a PMD. |
| CVE-2014-9584 | The parse_rock_ridge_inode_internal function in fs/isofs/rock.c in the Linux kernel before 3.18.2 does not validate a length value in the Extensions Reference (ER) System Use Field, which allows local users to obtain sensitive information from kernel memory via a crafted iso9660 image. |
| CVE-2014-9529 | Race condition in the key_gc_unused_keys function in security/keys/gc.c in the Linux kernel through 3.18.2 allows local users to cause a denial of service (memory corruption or panic) or possibly have unspecified other impact via keyctl commands that trigger access to a key structure member during garbage collection of a key. |
| CVE-2014-9428 | The batadv_frag_merge_packets function in net/batman-adv/fragmentation.c in the B.A.T.M.A.N. implementation in the Linux kernel through 3.18.1 uses an incorrect length field during a calculation of an amount of memory, which allows remote attackers to cause a denial of service (mesh-node system crash) via fragmented packets. |
| CVE-2014-9420 | The rock_continue function in fs/isofs/rock.c in the Linux kernel through 3.18.1 does not restrict the number of Rock Ridge continuation entries, which allows local users to cause a denial of service (infinite loop, and system crash or hang) via a crafted iso9660 image. |
| CVE-2014-9419 | The __switch_to function in arch/x86/kernel/process_64.c in the Linux kernel through 3.18.1 does not ensure that Thread Local Storage (TLS) descriptors are loaded before proceeding with other steps, which makes it easier for local users to bypass the ASLR protection mechanism via a crafted application that reads a TLS base address. |
| CVE-2014-9411 | In all Qualcomm products with Android releases from CAF using the Linux kernel, the use of an out-of-range pointer offset is potentially possible in rollback protection. |
| CVE-2014-9410 | The vfe31_proc_general function in drivers/media/video/msm/vfe/msm_vfe31.c in the MSM-VFE31 driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, does not validate a certain id value, which allows attackers to gain privileges or cause a denial of service (memory corruption) via an application that makes a crafted ioctl call. |
| CVE-2014-9322 | arch/x86/kernel/entry_64.S in the Linux kernel before 3.17.5 does not properly handle faults associated with the Stack Segment (SS) segment register, which allows local users to gain privileges by triggering an IRET instruction that leads to access to a GS Base address from the wrong space. |
| CVE-2014-9090 | The do_double_fault function in arch/x86/kernel/traps.c in the Linux kernel through 3.17.4 does not properly handle faults associated with the Stack Segment (SS) segment register, which allows local users to cause a denial of service (panic) via a modify_ldt system call, as demonstrated by sigreturn_32 in the linux-clock-tests test suite. |
| CVE-2014-8989 | The Linux kernel through 3.17.4 does not properly restrict dropping of supplemental group memberships in certain namespace scenarios, which allows local users to bypass intended file permissions by leveraging a POSIX ACL containing an entry for the group category that is more restrictive than the entry for the other category, aka a "negative groups" issue, related to kernel/groups.c, kernel/uid16.c, and kernel/user_namespace.c. |
| CVE-2014-8884 | Stack-based buffer overflow in the ttusbdecfe_dvbs_diseqc_send_master_cmd function in drivers/media/usb/ttusb-dec/ttusbdecfe.c in the Linux kernel before 3.17.4 allows local users to cause a denial of service (system crash) or possibly gain privileges via a large message length in an ioctl call. |
| CVE-2014-8709 | The ieee80211_fragment function in net/mac80211/tx.c in the Linux kernel before 3.13.5 does not properly maintain a certain tail pointer, which allows remote attackers to obtain sensitive cleartext information by reading packets. |
| CVE-2014-8559 | The d_walk function in fs/dcache.c in the Linux kernel through 3.17.2 does not properly maintain the semantics of rename_lock, which allows local users to cause a denial of service (deadlock and system hang) via a crafted application. |
| CVE-2014-8481 | The instruction decoder in arch/x86/kvm/emulate.c in the KVM subsystem in the Linux kernel before 3.18-rc2 does not properly handle invalid instructions, which allows guest OS users to cause a denial of service (NULL pointer dereference and host OS crash) via a crafted application that triggers (1) an improperly fetched instruction or (2) an instruction that occupies too many bytes. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-8480. |
| CVE-2014-8480 | The instruction decoder in arch/x86/kvm/emulate.c in the KVM subsystem in the Linux kernel before 3.18-rc2 lacks intended decoder-table flags for certain RIP-relative instructions, which allows guest OS users to cause a denial of service (NULL pointer dereference and host OS crash) via a crafted application. |
| CVE-2014-8369 | The kvm_iommu_map_pages function in virt/kvm/iommu.c in the Linux kernel through 3.17.2 miscalculates the number of pages during the handling of a mapping failure, which allows guest OS users to cause a denial of service (host OS page unpinning) or possibly have unspecified other impact by leveraging guest OS privileges. NOTE: this vulnerability exists because of an incorrect fix for CVE-2014-3601. |
| CVE-2014-8181 | The kernel in Red Hat Enterprise Linux 7 and MRG-2 does not clear garbage data for SG_IO buffer, which may leaking sensitive information to userspace. |
| CVE-2014-8173 | The pmd_none_or_trans_huge_or_clear_bad function in include/asm-generic/pgtable.h in the Linux kernel before 3.13 on NUMA systems does not properly determine whether a Page Middle Directory (PMD) entry is a transparent huge-table entry, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a crafted MADV_WILLNEED madvise system call that leverages the absence of a page-table lock. |
| CVE-2014-8172 | The filesystem implementation in the Linux kernel before 3.13 performs certain operations on lists of files with an inappropriate locking approach, which allows local users to cause a denial of service (soft lockup or system crash) via unspecified use of Asynchronous I/O (AIO) operations. |
| CVE-2014-8171 | The memory resource controller (aka memcg) in the Linux kernel allows local users to cause a denial of service (deadlock) by spawning new processes within a memory-constrained cgroup. |
| CVE-2014-8160 | net/netfilter/nf_conntrack_proto_generic.c in the Linux kernel before 3.18 generates incorrect conntrack entries during handling of certain iptables rule sets for the SCTP, DCCP, GRE, and UDP-Lite protocols, which allows remote attackers to bypass intended access restrictions via packets with disallowed port numbers. |
| CVE-2014-8159 | The InfiniBand (IB) implementation in the Linux kernel package before 2.6.32-504.12.2 on Red Hat Enterprise Linux (RHEL) 6 does not properly restrict use of User Verbs for registration of memory regions, which allows local users to access arbitrary physical memory locations, and consequently cause a denial of service (system crash) or gain privileges, by leveraging permissions on a uverbs device under /dev/infiniband/. |
| CVE-2014-8134 | The paravirt_ops_setup function in arch/x86/kernel/kvm.c in the Linux kernel through 3.18 uses an improper paravirt_enabled setting for KVM guest kernels, which makes it easier for guest OS users to bypass the ASLR protection mechanism via a crafted application that reads a 16-bit value. |
| CVE-2014-8133 | arch/x86/kernel/tls.c in the Thread Local Storage (TLS) implementation in the Linux kernel through 3.18.1 allows local users to bypass the espfix protection mechanism, and consequently makes it easier for local users to bypass the ASLR protection mechanism, via a crafted application that makes a set_thread_area system call and later reads a 16-bit value. |
| CVE-2014-8086 | Race condition in the ext4_file_write_iter function in fs/ext4/file.c in the Linux kernel through 3.17 allows local users to cause a denial of service (file unavailability) via a combination of a write action and an F_SETFL fcntl operation for the O_DIRECT flag. |
| CVE-2014-7975 | The do_umount function in fs/namespace.c in the Linux kernel through 3.17 does not require the CAP_SYS_ADMIN capability for do_remount_sb calls that change the root filesystem to read-only, which allows local users to cause a denial of service (loss of writability) by making certain unshare system calls, clearing the / MNT_LOCKED flag, and making an MNT_FORCE umount system call. |
| CVE-2014-7970 | The pivot_root implementation in fs/namespace.c in the Linux kernel through 3.17 does not properly interact with certain locations of a chroot directory, which allows local users to cause a denial of service (mount-tree loop) via . (dot) values in both arguments to the pivot_root system call. |
| CVE-2014-7843 | The __clear_user function in arch/arm64/lib/clear_user.S in the Linux kernel before 3.17.4 on the ARM64 platform allows local users to cause a denial of service (system crash) by reading one byte beyond a /dev/zero page boundary. |
| CVE-2014-7842 | Race condition in arch/x86/kvm/x86.c in the Linux kernel before 3.17.4 allows guest OS users to cause a denial of service (guest OS crash) via a crafted application that performs an MMIO transaction or a PIO transaction to trigger a guest userspace emulation error report, a similar issue to CVE-2010-5313. |
| CVE-2014-7841 | The sctp_process_param function in net/sctp/sm_make_chunk.c in the SCTP implementation in the Linux kernel before 3.17.4, when ASCONF is used, allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) via a malformed INIT chunk. |
| CVE-2014-7826 | kernel/trace/trace_syscalls.c in the Linux kernel through 3.17.2 does not properly handle private syscall numbers during use of the ftrace subsystem, which allows local users to gain privileges or cause a denial of service (invalid pointer dereference) via a crafted application. |
| CVE-2014-7825 | kernel/trace/trace_syscalls.c in the Linux kernel through 3.17.2 does not properly handle private syscall numbers during use of the perf subsystem, which allows local users to cause a denial of service (out-of-bounds read and OOPS) or bypass the ASLR protection mechanism via a crafted application. |
| CVE-2014-7822 | The implementation of certain splice_write file operations in the Linux kernel before 3.16 does not enforce a restriction on the maximum size of a single file, which allows local users to cause a denial of service (system crash) or possibly have unspecified other impact via a crafted splice system call, as demonstrated by use of a file descriptor associated with an ext4 filesystem. |
| CVE-2014-7300 | GNOME Shell 3.14.x before 3.14.1, when the Screen Lock feature is used, does not limit the aggregate memory consumption of all active PrtSc requests, which allows physically proximate attackers to execute arbitrary commands on an unattended workstation by making many PrtSc requests and leveraging a temporary lock outage, and the resulting temporary shell availability, caused by the Linux kernel OOM killer. |
| CVE-2014-7284 | The net_get_random_once implementation in net/core/utils.c in the Linux kernel 3.13.x and 3.14.x before 3.14.5 on certain Intel processors does not perform the intended slow-path operation to initialize random seeds, which makes it easier for remote attackers to spoof or disrupt IP communication by leveraging the predictability of TCP sequence numbers, TCP and UDP port numbers, and IP ID values. |
| CVE-2014-7283 | The xfs_da3_fixhashpath function in fs/xfs/xfs_da_btree.c in the xfs implementation in the Linux kernel before 3.14.2 does not properly compare btree hash values, which allows local users to cause a denial of service (filesystem corruption, and OOPS or panic) via operations on directories that have hash collisions, as demonstrated by rmdir operations. |
| CVE-2014-7207 | A certain Debian patch to the IPv6 implementation in the Linux kernel 3.2.x through 3.2.63 does not properly validate arguments in ipv6_select_ident function calls, which allows local users to cause a denial of service (NULL pointer dereference and system crash) by leveraging (1) tun or (2) macvtap device access. |
| CVE-2014-7145 | The SMB2_tcon function in fs/cifs/smb2pdu.c in the Linux kernel before 3.16.3 allows remote CIFS servers to cause a denial of service (NULL pointer dereference and client system crash) or possibly have unspecified other impact by deleting the IPC$ share during resolution of DFS referrals. |
| CVE-2014-6418 | net/ceph/auth_x.c in Ceph, as used in the Linux kernel before 3.16.3, does not properly validate auth replies, which allows remote attackers to cause a denial of service (system crash) or possibly have unspecified other impact via crafted data from the IP address of a Ceph Monitor. |
| CVE-2014-6417 | net/ceph/auth_x.c in Ceph, as used in the Linux kernel before 3.16.3, does not properly consider the possibility of kmalloc failure, which allows remote attackers to cause a denial of service (system crash) or possibly have unspecified other impact via a long unencrypted auth ticket. |
| CVE-2014-6416 | Buffer overflow in net/ceph/auth_x.c in Ceph, as used in the Linux kernel before 3.16.3, allows remote attackers to cause a denial of service (memory corruption and panic) or possibly have unspecified other impact via a long unencrypted auth ticket. |
| CVE-2014-6410 | The __udf_read_inode function in fs/udf/inode.c in the Linux kernel through 3.16.3 does not restrict the amount of ICB indirection, which allows physically proximate attackers to cause a denial of service (infinite loop or stack consumption) via a UDF filesystem with a crafted inode. |
| CVE-2014-5472 | The parse_rock_ridge_inode_internal function in fs/isofs/rock.c in the Linux kernel through 3.16.1 allows local users to cause a denial of service (unkillable mount process) via a crafted iso9660 image with a self-referential CL entry. |
| CVE-2014-5471 | Stack consumption vulnerability in the parse_rock_ridge_inode_internal function in fs/isofs/rock.c in the Linux kernel through 3.16.1 allows local users to cause a denial of service (uncontrolled recursion, and system crash or reboot) via a crafted iso9660 image with a CL entry referring to a directory entry that has a CL entry. |
| CVE-2014-5332 | Race condition in NVMap in NVIDIA Tegra Linux Kernel 3.10 allows local users to gain privileges via a crafted NVMAP_IOC_CREATE IOCTL call, which triggers a use-after-free error, as demonstrated by using a race condition to escape the Chrome sandbox. |
| CVE-2014-5207 | fs/namespace.c in the Linux kernel through 3.16.1 does not properly restrict clearing MNT_NODEV, MNT_NOSUID, and MNT_NOEXEC and changing MNT_ATIME_MASK during a remount of a bind mount, which allows local users to gain privileges, interfere with backups and auditing on systems that had atime enabled, or cause a denial of service (excessive filesystem updating) on systems that had atime disabled via a "mount -o remount" command within a user namespace. |
| CVE-2014-5206 | The do_remount function in fs/namespace.c in the Linux kernel through 3.16.1 does not maintain the MNT_LOCK_READONLY bit across a remount of a bind mount, which allows local users to bypass an intended read-only restriction and defeat certain sandbox protection mechanisms via a "mount -o remount" command within a user namespace. |
| CVE-2014-5077 | The sctp_assoc_update function in net/sctp/associola.c in the Linux kernel through 3.15.8, when SCTP authentication is enabled, allows remote attackers to cause a denial of service (NULL pointer dereference and OOPS) by starting to establish an association between two endpoints immediately after an exchange of INIT and INIT ACK chunks to establish an earlier association between these endpoints in the opposite direction. |
| CVE-2014-5045 | The mountpoint_last function in fs/namei.c in the Linux kernel before 3.15.8 does not properly maintain a certain reference count during attempts to use the umount system call in conjunction with a symlink, which allows local users to cause a denial of service (memory consumption or use-after-free) or possibly have unspecified other impact via the umount program. |
| CVE-2014-4943 | The PPPoL2TP feature in net/l2tp/l2tp_ppp.c in the Linux kernel through 3.15.6 allows local users to gain privileges by leveraging data-structure differences between an l2tp socket and an inet socket. |
| CVE-2014-4699 | The Linux kernel before 3.15.4 on Intel processors does not properly restrict use of a non-canonical value for the saved RIP address in the case of a system call that does not use IRET, which allows local users to leverage a race condition and gain privileges, or cause a denial of service (double fault), via a crafted application that makes ptrace and fork system calls. |
| CVE-2014-4667 | The sctp_association_free function in net/sctp/associola.c in the Linux kernel before 3.15.2 does not properly manage a certain backlog value, which allows remote attackers to cause a denial of service (socket outage) via a crafted SCTP packet. |
| CVE-2014-4656 | Multiple integer overflows in sound/core/control.c in the ALSA control implementation in the Linux kernel before 3.15.2 allow local users to cause a denial of service by leveraging /dev/snd/controlCX access, related to (1) index values in the snd_ctl_add function and (2) numid values in the snd_ctl_remove_numid_conflict function. |
| CVE-2014-4655 | The snd_ctl_elem_add function in sound/core/control.c in the ALSA control implementation in the Linux kernel before 3.15.2 does not properly maintain the user_ctl_count value, which allows local users to cause a denial of service (integer overflow and limit bypass) by leveraging /dev/snd/controlCX access for a large number of SNDRV_CTL_IOCTL_ELEM_REPLACE ioctl calls. |
| CVE-2014-4654 | The snd_ctl_elem_add function in sound/core/control.c in the ALSA control implementation in the Linux kernel before 3.15.2 does not check authorization for SNDRV_CTL_IOCTL_ELEM_REPLACE commands, which allows local users to remove kernel controls and cause a denial of service (use-after-free and system crash) by leveraging /dev/snd/controlCX access for an ioctl call. |
| CVE-2014-4653 | sound/core/control.c in the ALSA control implementation in the Linux kernel before 3.15.2 does not ensure possession of a read/write lock, which allows local users to cause a denial of service (use-after-free) and obtain sensitive information from kernel memory by leveraging /dev/snd/controlCX access. |
| CVE-2014-4652 | Race condition in the tlv handler functionality in the snd_ctl_elem_user_tlv function in sound/core/control.c in the ALSA control implementation in the Linux kernel before 3.15.2 allows local users to obtain sensitive information from kernel memory by leveraging /dev/snd/controlCX access. |
| CVE-2014-4611 | Integer overflow in the LZ4 algorithm implementation, as used in Yann Collet LZ4 before r118 and in the lz4_uncompress function in lib/lz4/lz4_decompress.c in the Linux kernel before 3.15.2, on 32-bit platforms might allow context-dependent attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via a crafted Literal Run that would be improperly handled by programs not complying with an API limitation, a different vulnerability than CVE-2014-4715. |
| CVE-2014-4608 | ** DISPUTED ** Multiple integer overflows in the lzo1x_decompress_safe function in lib/lzo/lzo1x_decompress_safe.c in the LZO decompressor in the Linux kernel before 3.15.2 allow context-dependent attackers to cause a denial of service (memory corruption) via a crafted Literal Run. NOTE: the author of the LZO algorithms says "the Linux kernel is *not* affected; media hype." |
| CVE-2014-4508 | arch/x86/kernel/entry_32.S in the Linux kernel through 3.15.1 on 32-bit x86 platforms, when syscall auditing is enabled and the sep CPU feature flag is set, allows local users to cause a denial of service (OOPS and system crash) via an invalid syscall number, as demonstrated by number 1000. |
| CVE-2014-4323 | The mdp_lut_hw_update function in drivers/video/msm/mdp.c in the MDP display driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, does not validate certain start and length values within an ioctl call, which allows attackers to gain privileges via a crafted application. |
| CVE-2014-4322 | drivers/misc/qseecom.c in the QSEECOM driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, does not validate certain offset, length, and base values within an ioctl call, which allows attackers to gain privileges or cause a denial of service (memory corruption) via a crafted application. |
| CVE-2014-4171 | mm/shmem.c in the Linux kernel through 3.15.1 does not properly implement the interaction between range notification and hole punching, which allows local users to cause a denial of service (i_mutex hold) by using the mmap system call to access a hole, as demonstrated by interfering with intended shmem activity by blocking completion of (1) an MADV_REMOVE madvise call or (2) an FALLOC_FL_PUNCH_HOLE fallocate call. |
| CVE-2014-4157 | arch/mips/include/asm/thread_info.h in the Linux kernel before 3.14.8 on the MIPS platform does not configure _TIF_SECCOMP checks on the fast system-call path, which allows local users to bypass intended PR_SET_SECCOMP restrictions by executing a crafted application without invoking a trace or audit subsystem. |
| CVE-2014-4027 | The rd_build_device_space function in drivers/target/target_core_rd.c in the Linux kernel before 3.14 does not properly initialize a certain data structure, which allows local users to obtain sensitive information from ramdisk_mcp memory by leveraging access to a SCSI initiator. |
| CVE-2014-4014 | The capabilities implementation in the Linux kernel before 3.14.8 does not properly consider that namespaces are inapplicable to inodes, which allows local users to bypass intended chmod restrictions by first creating a user namespace, as demonstrated by setting the setgid bit on a file with group ownership of root. |
| CVE-2014-3940 | The Linux kernel through 3.14.5 does not properly consider the presence of hugetlb entries, which allows local users to cause a denial of service (memory corruption or system crash) by accessing certain memory locations, as demonstrated by triggering a race condition via numa_maps read operations during hugepage migration, related to fs/proc/task_mmu.c and mm/mempolicy.c. |
| CVE-2014-3917 | kernel/auditsc.c in the Linux kernel through 3.14.5, when CONFIG_AUDITSYSCALL is enabled with certain syscall rules, allows local users to obtain potentially sensitive single-bit values from kernel memory or cause a denial of service (OOPS) via a large value of a syscall number. |
| CVE-2014-3690 | arch/x86/kvm/vmx.c in the KVM subsystem in the Linux kernel before 3.17.2 on Intel processors does not ensure that the value in the CR4 control register remains the same after a VM entry, which allows host OS users to kill arbitrary processes or cause a denial of service (system disruption) by leveraging /dev/kvm access, as demonstrated by PR_SET_TSC prctl calls within a modified copy of QEMU. |
| CVE-2014-3688 | The SCTP implementation in the Linux kernel before 3.17.4 allows remote attackers to cause a denial of service (memory consumption) by triggering a large number of chunks in an association's output queue, as demonstrated by ASCONF probes, related to net/sctp/inqueue.c and net/sctp/sm_statefuns.c. |
| CVE-2014-3687 | The sctp_assoc_lookup_asconf_ack function in net/sctp/associola.c in the SCTP implementation in the Linux kernel through 3.17.2 allows remote attackers to cause a denial of service (panic) via duplicate ASCONF chunks that trigger an incorrect uncork within the side-effect interpreter. |
| CVE-2014-3673 | The SCTP implementation in the Linux kernel through 3.17.2 allows remote attackers to cause a denial of service (system crash) via a malformed ASCONF chunk, related to net/sctp/sm_make_chunk.c and net/sctp/sm_statefuns.c. |
| CVE-2014-3647 | arch/x86/kvm/emulate.c in the KVM subsystem in the Linux kernel through 3.17.2 does not properly perform RIP changes, which allows guest OS users to cause a denial of service (guest OS crash) via a crafted application. |
| CVE-2014-3646 | arch/x86/kvm/vmx.c in the KVM subsystem in the Linux kernel through 3.17.2 does not have an exit handler for the INVVPID instruction, which allows guest OS users to cause a denial of service (guest OS crash) via a crafted application. |
| CVE-2014-3645 | arch/x86/kvm/vmx.c in the KVM subsystem in the Linux kernel before 3.12 does not have an exit handler for the INVEPT instruction, which allows guest OS users to cause a denial of service (guest OS crash) via a crafted application. |
| CVE-2014-3631 | The assoc_array_gc function in the associative-array implementation in lib/assoc_array.c in the Linux kernel before 3.16.3 does not properly implement garbage collection, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via multiple "keyctl newring" operations followed by a "keyctl timeout" operation. |
| CVE-2014-3611 | Race condition in the __kvm_migrate_pit_timer function in arch/x86/kvm/i8254.c in the KVM subsystem in the Linux kernel through 3.17.2 allows guest OS users to cause a denial of service (host OS crash) by leveraging incorrect PIT emulation. |
| CVE-2014-3610 | The WRMSR processing functionality in the KVM subsystem in the Linux kernel through 3.17.2 does not properly handle the writing of a non-canonical address to a model-specific register, which allows guest OS users to cause a denial of service (host OS crash) by leveraging guest OS privileges, related to the wrmsr_interception function in arch/x86/kvm/svm.c and the handle_wrmsr function in arch/x86/kvm/vmx.c. |
| CVE-2014-3601 | The kvm_iommu_map_pages function in virt/kvm/iommu.c in the Linux kernel through 3.16.1 miscalculates the number of pages during the handling of a mapping failure, which allows guest OS users to (1) cause a denial of service (host OS memory corruption) or possibly have unspecified other impact by triggering a large gfn value or (2) cause a denial of service (host OS memory consumption) by triggering a small gfn value that leads to permanently pinned pages. |
| CVE-2014-3535 | include/linux/netdevice.h in the Linux kernel before 2.6.36 incorrectly uses macros for netdev_printk and its related logging implementation, which allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) by sending invalid packets to a VxLAN interface. |
| CVE-2014-3534 | arch/s390/kernel/ptrace.c in the Linux kernel before 3.15.8 on the s390 platform does not properly restrict address-space control operations in PTRACE_POKEUSR_AREA requests, which allows local users to obtain read and write access to kernel memory locations, and consequently gain privileges, via a crafted application that makes a ptrace system call. |
| CVE-2014-3519 | The open_by_handle_at function in vzkernel before 042stab090.5 in the OpenVZ modification for the Linux kernel 2.6.32, when using simfs, might allow local container users with CAP_DAC_READ_SEARCH capability to bypass an intended container protection mechanism and access arbitrary files on a filesystem via vectors related to use of the file_handle structure. |
| CVE-2014-3186 | Buffer overflow in the picolcd_raw_event function in devices/hid/hid-picolcd_core.c in the PicoLCD HID device driver in the Linux kernel through 3.16.3, as used in Android on Nexus 7 devices, allows physically proximate attackers to cause a denial of service (system crash) or possibly execute arbitrary code via a crafted device that sends a large report. |
| CVE-2014-3185 | Multiple buffer overflows in the command_port_read_callback function in drivers/usb/serial/whiteheat.c in the Whiteheat USB Serial Driver in the Linux kernel before 3.16.2 allow physically proximate attackers to execute arbitrary code or cause a denial of service (memory corruption and system crash) via a crafted device that provides a large amount of (1) EHCI or (2) XHCI data associated with a bulk response. |
| CVE-2014-3184 | The report_fixup functions in the HID subsystem in the Linux kernel before 3.16.2 might allow physically proximate attackers to cause a denial of service (out-of-bounds write) via a crafted device that provides a small report descriptor, related to (1) drivers/hid/hid-cherry.c, (2) drivers/hid/hid-kye.c, (3) drivers/hid/hid-lg.c, (4) drivers/hid/hid-monterey.c, (5) drivers/hid/hid-petalynx.c, and (6) drivers/hid/hid-sunplus.c. |
| CVE-2014-3183 | Heap-based buffer overflow in the logi_dj_ll_raw_request function in drivers/hid/hid-logitech-dj.c in the Linux kernel before 3.16.2 allows physically proximate attackers to cause a denial of service (system crash) or possibly execute arbitrary code via a crafted device that specifies a large report size for an LED report. |
| CVE-2014-3182 | Array index error in the logi_dj_raw_event function in drivers/hid/hid-logitech-dj.c in the Linux kernel before 3.16.2 allows physically proximate attackers to execute arbitrary code or cause a denial of service (invalid kfree) via a crafted device that provides a malformed REPORT_TYPE_NOTIF_DEVICE_UNPAIRED value. |
| CVE-2014-3181 | Multiple stack-based buffer overflows in the magicmouse_raw_event function in drivers/hid/hid-magicmouse.c in the Magic Mouse HID driver in the Linux kernel through 3.16.3 allow physically proximate attackers to cause a denial of service (system crash) or possibly execute arbitrary code via a crafted device that provides a large amount of (1) EHCI or (2) XHCI data associated with an event. |
| CVE-2014-3180 | ** DISPUTED ** In kernel/compat.c in the Linux kernel before 3.17, as used in Google Chrome OS and other products, there is a possible out-of-bounds read. restart_syscall uses uninitialized data when restarting compat_sys_nanosleep. NOTE: this is disputed because the code path is unreachable. |
| CVE-2014-3153 | The futex_requeue function in kernel/futex.c in the Linux kernel through 3.14.5 does not ensure that calls have two different futex addresses, which allows local users to gain privileges via a crafted FUTEX_REQUEUE command that facilitates unsafe waiter modification. |
| CVE-2014-3145 | The BPF_S_ANC_NLATTR_NEST extension implementation in the sk_run_filter function in net/core/filter.c in the Linux kernel through 3.14.3 uses the reverse order in a certain subtraction, which allows local users to cause a denial of service (over-read and system crash) via crafted BPF instructions. NOTE: the affected code was moved to the __skb_get_nlattr_nest function before the vulnerability was announced. |
| CVE-2014-3144 | The (1) BPF_S_ANC_NLATTR and (2) BPF_S_ANC_NLATTR_NEST extension implementations in the sk_run_filter function in net/core/filter.c in the Linux kernel through 3.14.3 do not check whether a certain length value is sufficiently large, which allows local users to cause a denial of service (integer underflow and system crash) via crafted BPF instructions. NOTE: the affected code was moved to the __skb_get_nlattr and __skb_get_nlattr_nest functions before the vulnerability was announced. |
| CVE-2014-3122 | The try_to_unmap_cluster function in mm/rmap.c in the Linux kernel before 3.14.3 does not properly consider which pages must be locked, which allows local users to cause a denial of service (system crash) by triggering a memory-usage pattern that requires removal of page-table mappings. |
| CVE-2014-2889 | Off-by-one error in the bpf_jit_compile function in arch/x86/net/bpf_jit_comp.c in the Linux kernel before 3.1.8, when BPF JIT is enabled, allows local users to cause a denial of service (system crash) or possibly gain privileges via a long jump after a conditional jump. |
| CVE-2014-2851 | Integer overflow in the ping_init_sock function in net/ipv4/ping.c in the Linux kernel through 3.14.1 allows local users to cause a denial of service (use-after-free and system crash) or possibly gain privileges via a crafted application that leverages an improperly managed reference counter. |
| CVE-2014-2739 | The cma_req_handler function in drivers/infiniband/core/cma.c in the Linux kernel 3.14.x through 3.14.1 attempts to resolve an RDMA over Converged Ethernet (aka RoCE) address that is properly resolved within a different module, which allows remote attackers to cause a denial of service (incorrect pointer dereference and system crash) via crafted network traffic. |
| CVE-2014-2706 | Race condition in the mac80211 subsystem in the Linux kernel before 3.13.7 allows remote attackers to cause a denial of service (system crash) via network traffic that improperly interacts with the WLAN_STA_PS_STA state (aka power-save mode), related to sta_info.c and tx.c. |
| CVE-2014-2678 | The rds_iw_laddr_check function in net/rds/iw.c in the Linux kernel through 3.14 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a bind system call for an RDS socket on a system that lacks RDS transports. |
| CVE-2014-2673 | The arch_dup_task_struct function in the Transactional Memory (TM) implementation in arch/powerpc/kernel/process.c in the Linux kernel before 3.13.7 on the powerpc platform does not properly interact with the clone and fork system calls, which allows local users to cause a denial of service (Program Check and system crash) via certain instructions that are executed with the processor in the Transactional state. |
| CVE-2014-2672 | Race condition in the ath_tx_aggr_sleep function in drivers/net/wireless/ath/ath9k/xmit.c in the Linux kernel before 3.13.7 allows remote attackers to cause a denial of service (system crash) via a large amount of network traffic that triggers certain list deletions. |
| CVE-2014-2568 | Use-after-free vulnerability in the nfqnl_zcopy function in net/netfilter/nfnetlink_queue_core.c in the Linux kernel through 3.13.6 allows attackers to obtain sensitive information from kernel memory by leveraging the absence of a certain orphaning operation. NOTE: the affected code was moved to the skb_zerocopy function in net/core/skbuff.c before the vulnerability was announced. |
| CVE-2014-2523 | net/netfilter/nf_conntrack_proto_dccp.c in the Linux kernel through 3.13.6 uses a DCCP header pointer incorrectly, which allows remote attackers to cause a denial of service (system crash) or possibly execute arbitrary code via a DCCP packet that triggers a call to the (1) dccp_new, (2) dccp_packet, or (3) dccp_error function. |
| CVE-2014-2309 | The ip6_route_add function in net/ipv6/route.c in the Linux kernel through 3.13.6 does not properly count the addition of routes, which allows remote attackers to cause a denial of service (memory consumption) via a flood of ICMPv6 Router Advertisement packets. |
| CVE-2014-2039 | arch/s390/kernel/head64.S in the Linux kernel before 3.13.5 on the s390 platform does not properly handle attempted use of the linkage stack, which allows local users to cause a denial of service (system crash) by executing a crafted instruction. |
| CVE-2014-2038 | The nfs_can_extend_write function in fs/nfs/write.c in the Linux kernel before 3.13.3 relies on a write delegation to extend a write operation without a certain up-to-date verification, which allows local users to obtain sensitive information from kernel memory in opportunistic circumstances by writing to a file in an NFS filesystem and then reading the same file. |
| CVE-2014-1874 | The security_context_to_sid_core function in security/selinux/ss/services.c in the Linux kernel before 3.13.4 allows local users to cause a denial of service (system crash) by leveraging the CAP_MAC_ADMIN capability to set a zero-length security context. |
| CVE-2014-1739 | The media_device_enum_entities function in drivers/media/media-device.c in the Linux kernel before 3.14.6 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel memory by leveraging /dev/media0 read access for a MEDIA_IOC_ENUM_ENTITIES ioctl call. |
| CVE-2014-1738 | The raw_cmd_copyout function in drivers/block/floppy.c in the Linux kernel through 3.14.3 does not properly restrict access to certain pointers during processing of an FDRAWCMD ioctl call, which allows local users to obtain sensitive information from kernel heap memory by leveraging write access to a /dev/fd device. |
| CVE-2014-1737 | The raw_cmd_copyin function in drivers/block/floppy.c in the Linux kernel through 3.14.3 does not properly handle error conditions during processing of an FDRAWCMD ioctl call, which allows local users to trigger kfree operations and gain privileges by leveraging write access to a /dev/fd device. |
| CVE-2014-1690 | The help function in net/netfilter/nf_nat_irc.c in the Linux kernel before 3.12.8 allows remote attackers to obtain sensitive information from kernel memory by establishing an IRC DCC session in which incorrect packet data is transmitted during use of the NAT mangle feature. |
| CVE-2014-1446 | The yam_ioctl function in drivers/net/hamradio/yam.c in the Linux kernel before 3.12.8 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel memory by leveraging the CAP_NET_ADMIN capability for an SIOCYAMGCFG ioctl call. |
| CVE-2014-1445 | The wanxl_ioctl function in drivers/net/wan/wanxl.c in the Linux kernel before 3.11.7 does not properly initialize a certain data structure, which allows local users to obtain sensitive information from kernel memory via an ioctl call. |
| CVE-2014-1444 | The fst_get_iface function in drivers/net/wan/farsync.c in the Linux kernel before 3.11.7 does not properly initialize a certain data structure, which allows local users to obtain sensitive information from kernel memory by leveraging the CAP_NET_ADMIN capability for an SIOCWANDEV ioctl call. |
| CVE-2014-1438 | The restore_fpu_checking function in arch/x86/include/asm/fpu-internal.h in the Linux kernel before 3.12.8 on the AMD K7 and K8 platforms does not clear pending exceptions before proceeding to an EMMS instruction, which allows local users to cause a denial of service (task kill) or possibly gain privileges via a crafted application. |
| CVE-2014-0974 | The boot_linux_from_mmc function in app/aboot/aboot.c in the Little Kernel (LK) bootloader, as distributed with Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, does not properly validate a certain address value, which allows attackers to write data to a controllable memory location by leveraging the ability to initiate an attempted boot of an arbitrary image. |
| CVE-2014-0972 | The kgsl graphics driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, does not properly prevent write access to IOMMU context registers, which allows local users to select a custom page table, and consequently write to arbitrary memory locations, by using a crafted GPU command stream to modify the contents of a certain register. |
| CVE-2014-0206 | Array index error in the aio_read_events_ring function in fs/aio.c in the Linux kernel through 3.15.1 allows local users to obtain sensitive information from kernel memory via a large head value. |
| CVE-2014-0205 | The futex_wait function in kernel/futex.c in the Linux kernel before 2.6.37 does not properly maintain a certain reference count during requeue operations, which allows local users to cause a denial of service (use-after-free and system crash) or possibly gain privileges via a crafted application that triggers a zero count. |
| CVE-2014-0203 | The __do_follow_link function in fs/namei.c in the Linux kernel before 2.6.33 does not properly handle the last pathname component during use of certain filesystems, which allows local users to cause a denial of service (incorrect free operations and system crash) via an open system call. |
| CVE-2014-0196 | The n_tty_write function in drivers/tty/n_tty.c in the Linux kernel through 3.14.3 does not properly manage tty driver access in the "LECHO & !OPOST" case, which allows local users to cause a denial of service (memory corruption and system crash) or gain privileges by triggering a race condition involving read and write operations with long strings. |
| CVE-2014-0181 | The Netlink implementation in the Linux kernel through 3.14.1 does not provide a mechanism for authorizing socket operations based on the opener of a socket, which allows local users to bypass intended access restrictions and modify network configurations by using a Netlink socket for the (1) stdout or (2) stderr of a setuid program. |
| CVE-2014-0155 | The ioapic_deliver function in virt/kvm/ioapic.c in the Linux kernel through 3.14.1 does not properly validate the kvm_irq_delivery_to_apic return value, which allows guest OS users to cause a denial of service (host OS crash) via a crafted entry in the redirection table of an I/O APIC. NOTE: the affected code was moved to the ioapic_service function before the vulnerability was announced. |
| CVE-2014-0131 | Use-after-free vulnerability in the skb_segment function in net/core/skbuff.c in the Linux kernel through 3.13.6 allows attackers to obtain sensitive information from kernel memory by leveraging the absence of a certain orphaning operation. |
| CVE-2014-0102 | The keyring_detect_cycle_iterator function in security/keys/keyring.c in the Linux kernel through 3.13.6 does not properly determine whether keyrings are identical, which allows local users to cause a denial of service (OOPS) via crafted keyctl commands. |
| CVE-2014-0101 | The sctp_sf_do_5_1D_ce function in net/sctp/sm_statefuns.c in the Linux kernel through 3.13.6 does not validate certain auth_enable and auth_capable fields before making an sctp_sf_authenticate call, which allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) via an SCTP handshake with a modified INIT chunk and a crafted AUTH chunk before a COOKIE_ECHO chunk. |
| CVE-2014-0100 | Race condition in the inet_frag_intern function in net/ipv4/inet_fragment.c in the Linux kernel through 3.13.6 allows remote attackers to cause a denial of service (use-after-free error) or possibly have unspecified other impact via a large series of fragmented ICMP Echo Request packets to a system with a heavy CPU load. |
| CVE-2014-0077 | drivers/vhost/net.c in the Linux kernel before 3.13.10, when mergeable buffers are disabled, does not properly validate packet lengths, which allows guest OS users to cause a denial of service (memory corruption and host OS crash) or possibly gain privileges on the host OS via crafted packets, related to the handle_rx and get_rx_bufs functions. |
| CVE-2014-0069 | The cifs_iovec_write function in fs/cifs/file.c in the Linux kernel through 3.13.5 does not properly handle uncached write operations that copy fewer than the requested number of bytes, which allows local users to obtain sensitive information from kernel memory, cause a denial of service (memory corruption and system crash), or possibly gain privileges via a writev system call with a crafted pointer. |
| CVE-2014-0055 | The get_rx_bufs function in drivers/vhost/net.c in the vhost-net subsystem in the Linux kernel package before 2.6.32-431.11.2 on Red Hat Enterprise Linux (RHEL) 6 does not properly handle vhost_get_vq_desc errors, which allows guest OS users to cause a denial of service (host OS crash) via unspecified vectors. |
| CVE-2014-0049 | Buffer overflow in the complete_emulated_mmio function in arch/x86/kvm/x86.c in the Linux kernel before 3.13.6 allows guest OS users to execute arbitrary code on the host OS by leveraging a loop that triggers an invalid memory copy affecting certain cancel_work_item data. |
| CVE-2014-0038 | The compat_sys_recvmmsg function in net/compat.c in the Linux kernel before 3.13.2, when CONFIG_X86_X32 is enabled, allows local users to gain privileges via a recvmmsg system call with a crafted timeout pointer parameter. |
| CVE-2013-7470 | cipso_v4_validate in include/net/cipso_ipv4.h in the Linux kernel before 3.11.7, when CONFIG_NETLABEL is disabled, allows attackers to cause a denial of service (infinite loop and crash), as demonstrated by icmpsic, a different vulnerability than CVE-2013-0310. |
| CVE-2013-7446 | Use-after-free vulnerability in net/unix/af_unix.c in the Linux kernel before 4.3.3 allows local users to bypass intended AF_UNIX socket permissions or cause a denial of service (panic) via crafted epoll_ctl calls. |
| CVE-2013-7445 | The Direct Rendering Manager (DRM) subsystem in the Linux kernel through 4.x mishandles requests for Graphics Execution Manager (GEM) objects, which allows context-dependent attackers to cause a denial of service (memory consumption) via an application that processes graphics data, as demonstrated by JavaScript code that creates many CANVAS elements for rendering by Chrome or Firefox. |
| CVE-2013-7421 | The Crypto API in the Linux kernel before 3.18.5 allows local users to load arbitrary kernel modules via a bind system call for an AF_ALG socket with a module name in the salg_name field, a different vulnerability than CVE-2014-9644. |
| CVE-2013-7348 | Double free vulnerability in the ioctx_alloc function in fs/aio.c in the Linux kernel before 3.12.4 allows local users to cause a denial of service (system crash) or possibly have unspecified other impact via vectors involving an error condition in the aio_setup_ring function. |
| CVE-2013-7339 | The rds_ib_laddr_check function in net/rds/ib.c in the Linux kernel before 3.12.8 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a bind system call for an RDS socket on a system that lacks RDS transports. |
| CVE-2013-7281 | The dgram_recvmsg function in net/ieee802154/dgram.c in the Linux kernel before 3.12.4 updates a certain length value without ensuring that an associated data structure has been initialized, which allows local users to obtain sensitive information from kernel stack memory via a (1) recvfrom, (2) recvmmsg, or (3) recvmsg system call. |
| CVE-2013-7271 | The x25_recvmsg function in net/x25/af_x25.c in the Linux kernel before 3.12.4 updates a certain length value without ensuring that an associated data structure has been initialized, which allows local users to obtain sensitive information from kernel memory via a (1) recvfrom, (2) recvmmsg, or (3) recvmsg system call. |
| CVE-2013-7270 | The packet_recvmsg function in net/packet/af_packet.c in the Linux kernel before 3.12.4 updates a certain length value before ensuring that an associated data structure has been initialized, which allows local users to obtain sensitive information from kernel memory via a (1) recvfrom, (2) recvmmsg, or (3) recvmsg system call. |
| CVE-2013-7269 | The nr_recvmsg function in net/netrom/af_netrom.c in the Linux kernel before 3.12.4 updates a certain length value without ensuring that an associated data structure has been initialized, which allows local users to obtain sensitive information from kernel memory via a (1) recvfrom, (2) recvmmsg, or (3) recvmsg system call. |
| CVE-2013-7268 | The ipx_recvmsg function in net/ipx/af_ipx.c in the Linux kernel before 3.12.4 updates a certain length value without ensuring that an associated data structure has been initialized, which allows local users to obtain sensitive information from kernel memory via a (1) recvfrom, (2) recvmmsg, or (3) recvmsg system call. |
| CVE-2013-7267 | The atalk_recvmsg function in net/appletalk/ddp.c in the Linux kernel before 3.12.4 updates a certain length value without ensuring that an associated data structure has been initialized, which allows local users to obtain sensitive information from kernel memory via a (1) recvfrom, (2) recvmmsg, or (3) recvmsg system call. |
| CVE-2013-7266 | The mISDN_sock_recvmsg function in drivers/isdn/mISDN/socket.c in the Linux kernel before 3.12.4 does not ensure that a certain length value is consistent with the size of an associated data structure, which allows local users to obtain sensitive information from kernel memory via a (1) recvfrom, (2) recvmmsg, or (3) recvmsg system call. |
| CVE-2013-7265 | The pn_recvmsg function in net/phonet/datagram.c in the Linux kernel before 3.12.4 updates a certain length value before ensuring that an associated data structure has been initialized, which allows local users to obtain sensitive information from kernel stack memory via a (1) recvfrom, (2) recvmmsg, or (3) recvmsg system call. |
| CVE-2013-7264 | The l2tp_ip_recvmsg function in net/l2tp/l2tp_ip.c in the Linux kernel before 3.12.4 updates a certain length value before ensuring that an associated data structure has been initialized, which allows local users to obtain sensitive information from kernel stack memory via a (1) recvfrom, (2) recvmmsg, or (3) recvmsg system call. |
| CVE-2013-7263 | The Linux kernel before 3.12.4 updates certain length values before ensuring that associated data structures have been initialized, which allows local users to obtain sensitive information from kernel stack memory via a (1) recvfrom, (2) recvmmsg, or (3) recvmsg system call, related to net/ipv4/ping.c, net/ipv4/raw.c, net/ipv4/udp.c, net/ipv6/raw.c, and net/ipv6/udp.c. |
| CVE-2013-7027 | The ieee80211_radiotap_iterator_init function in net/wireless/radiotap.c in the Linux kernel before 3.11.7 does not check whether a frame contains any data outside of the header, which might allow attackers to cause a denial of service (buffer over-read) via a crafted header. |
| CVE-2013-7026 | Multiple race conditions in ipc/shm.c in the Linux kernel before 3.12.2 allow local users to cause a denial of service (use-after-free and system crash) or possibly have unspecified other impact via a crafted application that uses shmctl IPC_RMID operations in conjunction with other shm system calls. |
| CVE-2013-6763 | The uio_mmap_physical function in drivers/uio/uio.c in the Linux kernel before 3.12 does not validate the size of a memory block, which allows local users to cause a denial of service (memory corruption) or possibly gain privileges via crafted mmap operations, a different vulnerability than CVE-2013-4511. |
| CVE-2013-6432 | The ping_recvmsg function in net/ipv4/ping.c in the Linux kernel before 3.12.4 does not properly interact with read system calls on ping sockets, which allows local users to cause a denial of service (NULL pointer dereference and system crash) by leveraging unspecified privileges to execute a crafted application. |
| CVE-2013-6431 | The fib6_add function in net/ipv6/ip6_fib.c in the Linux kernel before 3.11.5 does not properly implement error-code encoding, which allows local users to cause a denial of service (NULL pointer dereference and system crash) by leveraging the CAP_NET_ADMIN capability for an IPv6 SIOCADDRT ioctl call. |
| CVE-2013-6392 | The genlock_dev_ioctl function in genlock.c in the Genlock driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, does not properly initialize a certain data structure, which allows local users to obtain sensitive information from kernel stack memory via a crafted GENLOCK_IOC_EXPORT ioctl call. |
| CVE-2013-6383 | The aac_compat_ioctl function in drivers/scsi/aacraid/linit.c in the Linux kernel before 3.11.8 does not require the CAP_SYS_RAWIO capability, which allows local users to bypass intended access restrictions via a crafted ioctl call. |
| CVE-2013-6382 | Multiple buffer underflows in the XFS implementation in the Linux kernel through 3.12.1 allow local users to cause a denial of service (memory corruption) or possibly have unspecified other impact by leveraging the CAP_SYS_ADMIN capability for a (1) XFS_IOC_ATTRLIST_BY_HANDLE or (2) XFS_IOC_ATTRLIST_BY_HANDLE_32 ioctl call with a crafted length value, related to the xfs_attrlist_by_handle function in fs/xfs/xfs_ioctl.c and the xfs_compat_attrlist_by_handle function in fs/xfs/xfs_ioctl32.c. |
| CVE-2013-6381 | Buffer overflow in the qeth_snmp_command function in drivers/s390/net/qeth_core_main.c in the Linux kernel through 3.12.1 allows local users to cause a denial of service or possibly have unspecified other impact via an SNMP ioctl call with a length value that is incompatible with the command-buffer size. |
| CVE-2013-6380 | The aac_send_raw_srb function in drivers/scsi/aacraid/commctrl.c in the Linux kernel through 3.12.1 does not properly validate a certain size value, which allows local users to cause a denial of service (invalid pointer dereference) or possibly have unspecified other impact via an FSACTL_SEND_RAW_SRB ioctl call that triggers a crafted SRB command. |
| CVE-2013-6378 | The lbs_debugfs_write function in drivers/net/wireless/libertas/debugfs.c in the Linux kernel through 3.12.1 allows local users to cause a denial of service (OOPS) by leveraging root privileges for a zero-length write operation. |
| CVE-2013-6376 | The recalculate_apic_map function in arch/x86/kvm/lapic.c in the KVM subsystem in the Linux kernel through 3.12.5 allows guest OS users to cause a denial of service (host OS crash) via a crafted ICR write operation in x2apic mode. |
| CVE-2013-6368 | The KVM subsystem in the Linux kernel through 3.12.5 allows local users to gain privileges or cause a denial of service (system crash) via a VAPIC synchronization operation involving a page-end address. |
| CVE-2013-6367 | The apic_get_tmcct function in arch/x86/kvm/lapic.c in the KVM subsystem in the Linux kernel through 3.12.5 allows guest OS users to cause a denial of service (divide-by-zero error and host OS crash) via crafted modifications of the TMICT value. |
| CVE-2013-6282 | The (1) get_user and (2) put_user API functions in the Linux kernel before 3.5.5 on the v6k and v7 ARM platforms do not validate certain addresses, which allows attackers to read or modify the contents of arbitrary kernel memory locations via a crafted application, as exploited in the wild against Android devices in October and November 2013. |
| CVE-2013-6123 | Multiple array index errors in drivers/media/video/msm/server/msm_cam_server.c in the MSM camera driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allow attackers to gain privileges by leveraging camera device-node access, related to the (1) msm_ctrl_cmd_done, (2) msm_ioctl_server, and (3) msm_server_send_ctrl functions. |
| CVE-2013-6122 | goodix_tool.c in the Goodix gt915 touchscreen driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, does not properly synchronize updates to a global variable, which allows local users to bypass intended access restrictions or cause a denial of service (memory corruption) via crafted arguments to the procfs write handler. |
| CVE-2013-5634 | arch/arm/kvm/arm.c in the Linux kernel before 3.10 on the ARM platform, when KVM is used, allows host OS users to cause a denial of service (NULL pointer dereference, OOPS, and host OS crash) or possibly have unspecified other impact by omitting vCPU initialization before a KVM_GET_REG_LIST ioctl call. |
| CVE-2013-4740 | goodix_tool.c in the Goodix gt915 touchscreen driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, relies on user-space length values for kernel-memory copies of procfs file content, which allows attackers to gain privileges or cause a denial of service (memory corruption) via an application that provides crafted values. |
| CVE-2013-4739 | The MSM camera driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to obtain sensitive information from kernel stack memory via (1) a crafted MSM_MCR_IOCTL_EVT_GET ioctl call, related to drivers/media/platform/msm/camera_v1/mercury/msm_mercury_sync.c, or (2) a crafted MSM_JPEG_IOCTL_EVT_GET ioctl call, related to drivers/media/platform/msm/camera_v2/jpeg_10/msm_jpeg_sync.c. |
| CVE-2013-4738 | Multiple stack-based buffer overflows in the MSM camera driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allow attackers to gain privileges via (1) a crafted VIDIOC_MSM_VPE_DEQUEUE_STREAM_BUFF_INFO ioctl call, related to drivers/media/platform/msm/camera_v2/pproc/vpe/msm_vpe.c, or (2) a crafted VIDIOC_MSM_CPP_DEQUEUE_STREAM_BUFF_INFO ioctl call, related to drivers/media/platform/msm/camera_v2/pproc/cpp/msm_cpp.c. |
| CVE-2013-4737 | The CONFIG_STRICT_MEMORY_RWX implementation for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, does not properly consider certain memory sections, which makes it easier for attackers to bypass intended access restrictions by leveraging the presence of RWX memory at a fixed location. |
| CVE-2013-4736 | Multiple integer overflows in the JPEG engine drivers in the MSM camera driver for the Linux kernel 2.6.x and 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allow attackers to cause a denial of service (system crash) via a large number of commands in an ioctl call, related to (1) camera_v1/gemini/msm_gemini_sync.c, (2) camera_v2/gemini/msm_gemini_sync.c, (3) camera_v2/jpeg_10/msm_jpeg_sync.c, (4) gemini/msm_gemini_sync.c, (5) jpeg_10/msm_jpeg_sync.c, and (6) mercury/msm_mercury_sync.c. |
| CVE-2013-4592 | Memory leak in the __kvm_set_memory_region function in virt/kvm/kvm_main.c in the Linux kernel before 3.9 allows local users to cause a denial of service (memory consumption) by leveraging certain device access to trigger movement of memory slots. |
| CVE-2013-4591 | Buffer overflow in the __nfs4_get_acl_uncached function in fs/nfs/nfs4proc.c in the Linux kernel before 3.7.2 allows local users to cause a denial of service (memory corruption and system crash) or possibly have unspecified other impact via a getxattr system call for the system.nfs4_acl extended attribute of a pathname on an NFSv4 filesystem. |
| CVE-2013-4588 | Multiple stack-based buffer overflows in net/netfilter/ipvs/ip_vs_ctl.c in the Linux kernel before 2.6.33, when CONFIG_IP_VS is used, allow local users to gain privileges by leveraging the CAP_NET_ADMIN capability for (1) a getsockopt system call, related to the do_ip_vs_get_ctl function, or (2) a setsockopt system call, related to the do_ip_vs_set_ctl function. |
| CVE-2013-4587 | Array index error in the kvm_vm_ioctl_create_vcpu function in virt/kvm/kvm_main.c in the KVM subsystem in the Linux kernel through 3.12.5 allows local users to gain privileges via a large id value. |
| CVE-2013-4579 | The ath9k_htc_set_bssid_mask function in drivers/net/wireless/ath/ath9k/htc_drv_main.c in the Linux kernel through 3.12 uses a BSSID masking approach to determine the set of MAC addresses on which a Wi-Fi device is listening, which allows remote attackers to discover the original MAC address after spoofing by sending a series of packets to MAC addresses with certain bit manipulations. |
| CVE-2013-4563 | The udp6_ufo_fragment function in net/ipv6/udp_offload.c in the Linux kernel through 3.12, when UDP Fragmentation Offload (UFO) is enabled, does not properly perform a certain size comparison before inserting a fragment header, which allows remote attackers to cause a denial of service (panic) via a large IPv6 UDP packet, as demonstrated by use of the Token Bucket Filter (TBF) queueing discipline. |
| CVE-2013-4516 | The mp_get_count function in drivers/staging/sb105x/sb_pci_mp.c in the Linux kernel before 3.12 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel stack memory via a TIOCGICOUNT ioctl call. |
| CVE-2013-4515 | The bcm_char_ioctl function in drivers/staging/bcm/Bcmchar.c in the Linux kernel before 3.12 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel memory via an IOCTL_BCM_GET_DEVICE_DRIVER_INFO ioctl call. |
| CVE-2013-4514 | Multiple buffer overflows in drivers/staging/wlags49_h2/wl_priv.c in the Linux kernel before 3.12 allow local users to cause a denial of service or possibly have unspecified other impact by leveraging the CAP_NET_ADMIN capability and providing a long station-name string, related to the (1) wvlan_uil_put_info and (2) wvlan_set_station_nickname functions. |
| CVE-2013-4513 | Buffer overflow in the oz_cdev_write function in drivers/staging/ozwpan/ozcdev.c in the Linux kernel before 3.12 allows local users to cause a denial of service or possibly have unspecified other impact via a crafted write operation. |
| CVE-2013-4512 | Buffer overflow in the exitcode_proc_write function in arch/um/kernel/exitcode.c in the Linux kernel before 3.12 allows local users to cause a denial of service or possibly have unspecified other impact by leveraging root privileges for a write operation. |
| CVE-2013-4511 | Multiple integer overflows in Alchemy LCD frame-buffer drivers in the Linux kernel before 3.12 allow local users to create a read-write memory mapping for the entirety of kernel memory, and consequently gain privileges, via crafted mmap operations, related to the (1) au1100fb_fb_mmap function in drivers/video/au1100fb.c and the (2) au1200fb_fb_mmap function in drivers/video/au1200fb.c. |
| CVE-2013-4483 | The ipc_rcu_putref function in ipc/util.c in the Linux kernel before 3.10 does not properly manage a reference count, which allows local users to cause a denial of service (memory consumption or system crash) via a crafted application. |
| CVE-2013-4470 | The Linux kernel before 3.12, when UDP Fragmentation Offload (UFO) is enabled, does not properly initialize certain data structures, which allows local users to cause a denial of service (memory corruption and system crash) or possibly gain privileges via a crafted application that uses the UDP_CORK option in a setsockopt system call and sends both short and long packets, related to the ip_ufo_append_data function in net/ipv4/ip_output.c and the ip6_ufo_append_data function in net/ipv6/ip6_output.c. |
| CVE-2013-4387 | net/ipv6/ip6_output.c in the Linux kernel through 3.11.4 does not properly determine the need for UDP Fragmentation Offload (UFO) processing of small packets after the UFO queueing of a large packet, which allows remote attackers to cause a denial of service (memory corruption and system crash) or possibly have unspecified other impact via network traffic that triggers a large response packet. |
| CVE-2013-4367 | ovirt-engine 3.2 running on Linux kernel 3.1 and newer creates certain files world-writeable due to an upstream kernel change which impacted how python's os.chmod() works when passed a mode of '-1'. |
| CVE-2013-4362 | WEB-DAV Linux File System (davfs2) 1.4.6 and 1.4.7 allow local users to gain privileges via unknown attack vectors in (1) kernel_interface.c and (2) mount_davfs.c, related to the "system" function. |
| CVE-2013-4350 | The IPv6 SCTP implementation in net/sctp/ipv6.c in the Linux kernel through 3.11.1 uses data structures and function calls that do not trigger an intended configuration of IPsec encryption, which allows remote attackers to obtain sensitive information by sniffing the network. |
| CVE-2013-4348 | The skb_flow_dissect function in net/core/flow_dissector.c in the Linux kernel through 3.12 allows remote attackers to cause a denial of service (infinite loop) via a small value in the IHL field of a packet with IPIP encapsulation. |
| CVE-2013-4345 | Off-by-one error in the get_prng_bytes function in crypto/ansi_cprng.c in the Linux kernel through 3.11.4 makes it easier for context-dependent attackers to defeat cryptographic protection mechanisms via multiple requests for small amounts of data, leading to improper management of the state of the consumed data. |
| CVE-2013-4343 | Use-after-free vulnerability in drivers/net/tun.c in the Linux kernel through 3.11.1 allows local users to gain privileges by leveraging the CAP_NET_ADMIN capability and providing an invalid tuntap interface name in a TUNSETIFF ioctl call. |
| CVE-2013-4312 | The Linux kernel before 4.4.1 allows local users to bypass file-descriptor limits and cause a denial of service (memory consumption) by sending each descriptor over a UNIX socket before closing it, related to net/unix/af_unix.c and net/unix/garbage.c. |
| CVE-2013-4300 | The scm_check_creds function in net/core/scm.c in the Linux kernel before 3.11 performs a capability check in an incorrect namespace, which allows local users to gain privileges via PID spoofing. |
| CVE-2013-4299 | Interpretation conflict in drivers/md/dm-snap-persistent.c in the Linux kernel through 3.11.6 allows remote authenticated users to obtain sensitive information or modify data via a crafted mapping to a snapshot block device. |
| CVE-2013-4270 | The net_ctl_permissions function in net/sysctl_net.c in the Linux kernel before 3.11.5 does not properly determine uid and gid values, which allows local users to bypass intended /proc/sys/net restrictions via a crafted application. |
| CVE-2013-4254 | The validate_event function in arch/arm/kernel/perf_event.c in the Linux kernel before 3.10.8 on the ARM platform allows local users to gain privileges or cause a denial of service (NULL pointer dereference and system crash) by adding a hardware event to an event group led by a software event. |
| CVE-2013-4247 | Off-by-one error in the build_unc_path_to_root function in fs/cifs/connect.c in the Linux kernel before 3.9.6 allows remote attackers to cause a denial of service (memory corruption and system crash) via a DFS share mount operation that triggers use of an unexpected DFS referral name length. |
| CVE-2013-4220 | The bad_mode function in arch/arm64/kernel/traps.c in the Linux kernel before 3.9.5 on the ARM64 platform allows local users to cause a denial of service (system crash) via vectors involving an attempted register access that triggers an unexpected value in the Exception Syndrome Register (ESR). |
| CVE-2013-4205 | Memory leak in the unshare_userns function in kernel/user_namespace.c in the Linux kernel before 3.10.6 allows local users to cause a denial of service (memory consumption) via an invalid CLONE_NEWUSER unshare call. |
| CVE-2013-4163 | The ip6_append_data_mtu function in net/ipv6/ip6_output.c in the IPv6 implementation in the Linux kernel through 3.10.3 does not properly maintain information about whether the IPV6_MTU setsockopt option had been specified, which allows local users to cause a denial of service (BUG and system crash) via a crafted application that uses the UDP_CORK option in a setsockopt system call. |
| CVE-2013-4162 | The udp_v6_push_pending_frames function in net/ipv6/udp.c in the IPv6 implementation in the Linux kernel through 3.10.3 makes an incorrect function call for pending data, which allows local users to cause a denial of service (BUG and system crash) via a crafted application that uses the UDP_CORK option in a setsockopt system call. |
| CVE-2013-4129 | The bridge multicast implementation in the Linux kernel through 3.10.3 does not check whether a certain timer is armed before modifying the timeout value of that timer, which allows local users to cause a denial of service (BUG and system crash) via vectors involving the shutdown of a KVM virtual machine, related to net/bridge/br_mdb.c and net/bridge/br_multicast.c. |
| CVE-2013-4127 | Use-after-free vulnerability in the vhost_net_set_backend function in drivers/vhost/net.c in the Linux kernel through 3.10.3 allows local users to cause a denial of service (OOPS and system crash) via vectors involving powering on a virtual machine. |
| CVE-2013-4125 | The fib6_add_rt2node function in net/ipv6/ip6_fib.c in the IPv6 stack in the Linux kernel through 3.10.1 does not properly handle Router Advertisement (RA) messages in certain circumstances involving three routes that initially qualified for membership in an ECMP route set until a change occurred for one of the first two routes, which allows remote attackers to cause a denial of service (system crash) via a crafted sequence of messages. |
| CVE-2013-3302 | Race condition in the smb_send_rqst function in fs/cifs/transport.c in the Linux kernel before 3.7.2 allows local users to cause a denial of service (NULL pointer dereference and OOPS) or possibly have unspecified other impact via vectors involving a reconnection event. |
| CVE-2013-3301 | The ftrace implementation in the Linux kernel before 3.8.8 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by leveraging the CAP_SYS_ADMIN capability for write access to the (1) set_ftrace_pid or (2) set_graph_function file, and then making an lseek system call. |
| CVE-2013-3237 | The vsock_stream_sendmsg function in net/vmw_vsock/af_vsock.c in the Linux kernel before 3.9-rc7 does not initialize a certain length variable, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3236 | The vmci_transport_dgram_dequeue function in net/vmw_vsock/vmci_transport.c in the Linux kernel before 3.9-rc7 does not properly initialize a certain length variable, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3235 | net/tipc/socket.c in the Linux kernel before 3.9-rc7 does not initialize a certain data structure and a certain length variable, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3234 | The rose_recvmsg function in net/rose/af_rose.c in the Linux kernel before 3.9-rc7 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3233 | The llcp_sock_recvmsg function in net/nfc/llcp/sock.c in the Linux kernel before 3.9-rc7 does not initialize a certain length variable and a certain data structure, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3232 | The nr_recvmsg function in net/netrom/af_netrom.c in the Linux kernel before 3.9-rc7 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3231 | The llc_ui_recvmsg function in net/llc/af_llc.c in the Linux kernel before 3.9-rc7 does not initialize a certain length variable, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3230 | The l2tp_ip6_recvmsg function in net/l2tp/l2tp_ip6.c in the Linux kernel before 3.9-rc7 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3229 | The iucv_sock_recvmsg function in net/iucv/af_iucv.c in the Linux kernel before 3.9-rc7 does not initialize a certain length variable, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3228 | The irda_recvmsg_dgram function in net/irda/af_irda.c in the Linux kernel before 3.9-rc7 does not initialize a certain length variable, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3227 | The caif_seqpkt_recvmsg function in net/caif/caif_socket.c in the Linux kernel before 3.9-rc7 does not initialize a certain length variable, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3226 | The sco_sock_recvmsg function in net/bluetooth/sco.c in the Linux kernel before 3.9-rc7 does not initialize a certain length variable, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3225 | The rfcomm_sock_recvmsg function in net/bluetooth/rfcomm/sock.c in the Linux kernel before 3.9-rc7 does not initialize a certain length variable, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3224 | The bt_sock_recvmsg function in net/bluetooth/af_bluetooth.c in the Linux kernel before 3.9-rc7 does not properly initialize a certain length variable, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3223 | The ax25_recvmsg function in net/ax25/af_ax25.c in the Linux kernel before 3.9-rc7 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3222 | The vcc_recvmsg function in net/atm/common.c in the Linux kernel before 3.9-rc7 does not initialize a certain length variable, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call. |
| CVE-2013-3076 | The crypto API in the Linux kernel through 3.9-rc8 does not initialize certain length variables, which allows local users to obtain sensitive information from kernel stack memory via a crafted recvmsg or recvfrom system call, related to the hash_recvmsg function in crypto/algif_hash.c and the skcipher_recvmsg function in crypto/algif_skcipher.c. |
| CVE-2013-2930 | The perf_trace_event_perm function in kernel/trace/trace_event_perf.c in the Linux kernel before 3.12.2 does not properly restrict access to the perf subsystem, which allows local users to enable function tracing via a crafted application. |
| CVE-2013-2929 | The Linux kernel before 3.12.2 does not properly use the get_dumpable function, which allows local users to bypass intended ptrace restrictions or obtain sensitive information from IA64 scratch registers via a crafted application, related to kernel/ptrace.c and arch/ia64/include/asm/processor.h. |
| CVE-2013-2899 | drivers/hid/hid-picolcd_core.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_HID_PICOLCD is enabled, allows physically proximate attackers to cause a denial of service (NULL pointer dereference and OOPS) via a crafted device. |
| CVE-2013-2898 | drivers/hid/hid-sensor-hub.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_HID_SENSOR_HUB is enabled, allows physically proximate attackers to obtain sensitive information from kernel memory via a crafted device. |
| CVE-2013-2897 | Multiple array index errors in drivers/hid/hid-multitouch.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_HID_MULTITOUCH is enabled, allow physically proximate attackers to cause a denial of service (heap memory corruption, or NULL pointer dereference and OOPS) via a crafted device. |
| CVE-2013-2896 | drivers/hid/hid-ntrig.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_HID_NTRIG is enabled, allows physically proximate attackers to cause a denial of service (NULL pointer dereference and OOPS) via a crafted device. |
| CVE-2013-2895 | drivers/hid/hid-logitech-dj.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_HID_LOGITECH_DJ is enabled, allows physically proximate attackers to cause a denial of service (NULL pointer dereference and OOPS) or obtain sensitive information from kernel memory via a crafted device. |
| CVE-2013-2894 | drivers/hid/hid-lenovo-tpkbd.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_HID_LENOVO_TPKBD is enabled, allows physically proximate attackers to cause a denial of service (heap-based out-of-bounds write) via a crafted device. |
| CVE-2013-2893 | The Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_LOGITECH_FF, CONFIG_LOGIG940_FF, or CONFIG_LOGIWHEELS_FF is enabled, allows physically proximate attackers to cause a denial of service (heap-based out-of-bounds write) via a crafted device, related to (1) drivers/hid/hid-lgff.c, (2) drivers/hid/hid-lg3ff.c, and (3) drivers/hid/hid-lg4ff.c. |
| CVE-2013-2892 | drivers/hid/hid-pl.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_HID_PANTHERLORD is enabled, allows physically proximate attackers to cause a denial of service (heap-based out-of-bounds write) via a crafted device. |
| CVE-2013-2891 | drivers/hid/hid-steelseries.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_HID_STEELSERIES is enabled, allows physically proximate attackers to cause a denial of service (heap-based out-of-bounds write) via a crafted device. |
| CVE-2013-2890 | drivers/hid/hid-sony.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_HID_SONY is enabled, allows physically proximate attackers to cause a denial of service (heap-based out-of-bounds write) via a crafted device. |
| CVE-2013-2889 | drivers/hid/hid-zpff.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_HID_ZEROPLUS is enabled, allows physically proximate attackers to cause a denial of service (heap-based out-of-bounds write) via a crafted device. |
| CVE-2013-2888 | Multiple array index errors in drivers/hid/hid-core.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11 allow physically proximate attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a crafted device that provides an invalid Report ID. |
| CVE-2013-2852 | Format string vulnerability in the b43_request_firmware function in drivers/net/wireless/b43/main.c in the Broadcom B43 wireless driver in the Linux kernel through 3.9.4 allows local users to gain privileges by leveraging root access and including format string specifiers in an fwpostfix modprobe parameter, leading to improper construction of an error message. |
| CVE-2013-2851 | Format string vulnerability in the register_disk function in block/genhd.c in the Linux kernel through 3.9.4 allows local users to gain privileges by leveraging root access and writing format string specifiers to /sys/module/md_mod/parameters/new_array in order to create a crafted /dev/md device name. |
| CVE-2013-2850 | Heap-based buffer overflow in the iscsi_add_notunderstood_response function in drivers/target/iscsi/iscsi_target_parameters.c in the iSCSI target subsystem in the Linux kernel through 3.9.4 allows remote attackers to cause a denial of service (memory corruption and OOPS) or possibly execute arbitrary code via a long key that is not properly handled during construction of an error-response packet. |
| CVE-2013-2636 | net/bridge/br_mdb.c in the Linux kernel before 3.8.4 does not initialize certain structures, which allows local users to obtain sensitive information from kernel memory via a crafted application. |
| CVE-2013-2635 | The rtnl_fill_ifinfo function in net/core/rtnetlink.c in the Linux kernel before 3.8.4 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel stack memory via a crafted application. |
| CVE-2013-2634 | net/dcb/dcbnl.c in the Linux kernel before 3.8.4 does not initialize certain structures, which allows local users to obtain sensitive information from kernel stack memory via a crafted application. |
| CVE-2013-2597 | Stack-based buffer overflow in the acdb_ioctl function in audio_acdb.c in the acdb audio driver for the Linux kernel 2.6.x and 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to gain privileges via an application that leverages /dev/msm_acdb access and provides a large size value in an ioctl argument. |
| CVE-2013-2596 | Integer overflow in the fb_mmap function in drivers/video/fbmem.c in the Linux kernel before 3.8.9, as used in a certain Motorola build of Android 4.1.2 and other products, allows local users to create a read-write memory mapping for the entirety of kernel memory, and consequently gain privileges, via crafted /dev/graphics/fb0 mmap2 system calls, as demonstrated by the Motochopper pwn program. |
| CVE-2013-2595 | The device-initialization functionality in the MSM camera driver for the Linux kernel 2.6.x and 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, enables MSM_CAM_IOCTL_SET_MEM_MAP_INFO ioctl calls for an unrestricted mmap interface, which allows attackers to gain privileges via a crafted application. |
| CVE-2013-2548 | The crypto_report_one function in crypto/crypto_user.c in the report API in the crypto user configuration API in the Linux kernel through 3.8.2 uses an incorrect length value during a copy operation, which allows local users to obtain sensitive information from kernel memory by leveraging the CAP_NET_ADMIN capability. |
| CVE-2013-2547 | The crypto_report_one function in crypto/crypto_user.c in the report API in the crypto user configuration API in the Linux kernel through 3.8.2 does not initialize certain structure members, which allows local users to obtain sensitive information from kernel heap memory by leveraging the CAP_NET_ADMIN capability. |
| CVE-2013-2546 | The report API in the crypto user configuration API in the Linux kernel through 3.8.2 uses an incorrect C library function for copying strings, which allows local users to obtain sensitive information from kernel stack memory by leveraging the CAP_NET_ADMIN capability. |
| CVE-2013-2239 | vzkernel before 042stab080.2 in the OpenVZ modification for the Linux kernel 2.6.32 does not initialize certain length variables, which allows local users to obtain sensitive information from kernel stack memory via (1) a crafted ploop driver ioctl call, related to the ploop_getdevice_ioc function in drivers/block/ploop/dev.c, or (2) a crafted quotactl system call, related to the compat_quotactl function in fs/quota/quota.c. |
| CVE-2013-2237 | The key_notify_policy_flush function in net/key/af_key.c in the Linux kernel before 3.9 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel heap memory by reading a broadcast message from the notify_policy interface of an IPSec key_socket. |
| CVE-2013-2234 | The (1) key_notify_sa_flush and (2) key_notify_policy_flush functions in net/key/af_key.c in the Linux kernel before 3.10 do not initialize certain structure members, which allows local users to obtain sensitive information from kernel heap memory by reading a broadcast message from the notify interface of an IPSec key_socket. |
| CVE-2013-2232 | The ip6_sk_dst_check function in net/ipv6/ip6_output.c in the Linux kernel before 3.10 allows local users to cause a denial of service (system crash) by using an AF_INET6 socket for a connection to an IPv4 interface. |
| CVE-2013-2224 | A certain Red Hat patch for the Linux kernel 2.6.32 on Red Hat Enterprise Linux (RHEL) 6 allows local users to cause a denial of service (invalid free operation and system crash) or possibly gain privileges via a sendmsg system call with the IP_RETOPTS option, as demonstrated by hemlock.c. NOTE: this vulnerability exists because of an incorrect fix for CVE-2012-3552. |
| CVE-2013-2206 | The sctp_sf_do_5_2_4_dupcook function in net/sctp/sm_statefuns.c in the SCTP implementation in the Linux kernel before 3.8.5 does not properly handle associations during the processing of a duplicate COOKIE ECHO chunk, which allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via crafted SCTP traffic. |
| CVE-2013-2188 | A certain Red Hat patch to the do_filp_open function in fs/namei.c in the kernel package before 2.6.32-358.11.1.el6 on Red Hat Enterprise Linux (RHEL) 6 does not properly handle failure to obtain write permissions, which allows local users to cause a denial of service (system crash) by leveraging access to a filesystem that is mounted read-only. |
| CVE-2013-2164 | The mmc_ioctl_cdrom_read_data function in drivers/cdrom/cdrom.c in the Linux kernel through 3.10 allows local users to obtain sensitive information from kernel memory via a read operation on a malfunctioning CD-ROM drive. |
| CVE-2013-2148 | The fill_event_metadata function in fs/notify/fanotify/fanotify_user.c in the Linux kernel through 3.9.4 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel memory via a read operation on the fanotify descriptor. |
| CVE-2013-2147 | The HP Smart Array controller disk-array driver and Compaq SMART2 controller disk-array driver in the Linux kernel through 3.9.4 do not initialize certain data structures, which allows local users to obtain sensitive information from kernel memory via (1) a crafted IDAGETPCIINFO command for a /dev/ida device, related to the ida_locked_ioctl function in drivers/block/cpqarray.c or (2) a crafted CCISS_PASSTHRU32 command for a /dev/cciss device, related to the cciss_ioctl32_passthru function in drivers/block/cciss.c. |
| CVE-2013-2146 | arch/x86/kernel/cpu/perf_event_intel.c in the Linux kernel before 3.8.9, when the Performance Events Subsystem is enabled, specifies an incorrect bitmask, which allows local users to cause a denial of service (general protection fault and system crash) by attempting to set a reserved bit. |
| CVE-2013-2141 | The do_tkill function in kernel/signal.c in the Linux kernel before 3.8.9 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel memory via a crafted application that makes a (1) tkill or (2) tgkill system call. |
| CVE-2013-2140 | The dispatch_discard_io function in drivers/block/xen-blkback/blkback.c in the Xen blkback implementation in the Linux kernel before 3.10.5 allows guest OS users to cause a denial of service (data loss) via filesystem write operations on a read-only disk that supports the (1) BLKIF_OP_DISCARD (aka discard or TRIM) or (2) SCSI UNMAP feature. |
| CVE-2013-2128 | The tcp_read_sock function in net/ipv4/tcp.c in the Linux kernel before 2.6.34 does not properly manage skb consumption, which allows local users to cause a denial of service (system crash) via a crafted splice system call for a TCP socket. |
| CVE-2013-2094 | The perf_swevent_init function in kernel/events/core.c in the Linux kernel before 3.8.9 uses an incorrect integer data type, which allows local users to gain privileges via a crafted perf_event_open system call. |
| CVE-2013-2058 | The host_start function in drivers/usb/chipidea/host.c in the Linux kernel before 3.7.4 does not properly support a certain non-streaming option, which allows local users to cause a denial of service (system crash) by sending a large amount of network traffic through a USB/Ethernet adapter. |
| CVE-2013-2017 | The veth (aka virtual Ethernet) driver in the Linux kernel before 2.6.34 does not properly manage skbs during congestion, which allows remote attackers to cause a denial of service (system crash) by leveraging lack of skb consumption in conjunction with a double-free error. |
| CVE-2013-2015 | The ext4_orphan_del function in fs/ext4/namei.c in the Linux kernel before 3.7.3 does not properly handle orphan-list entries for non-journal filesystems, which allows physically proximate attackers to cause a denial of service (system hang) via a crafted filesystem on removable media, as demonstrated by the e2fsprogs tests/f_orphan_extents_inode/image.gz test. |
| CVE-2013-1979 | The scm_set_cred function in include/net/scm.h in the Linux kernel before 3.8.11 uses incorrect uid and gid values during credentials passing, which allows local users to gain privileges via a crafted application. |
| CVE-2013-1959 | kernel/user_namespace.c in the Linux kernel before 3.8.9 does not have appropriate capability requirements for the uid_map and gid_map files, which allows local users to gain privileges by opening a file within an unprivileged process and then modifying the file within a privileged process. |
| CVE-2013-1958 | The scm_check_creds function in net/core/scm.c in the Linux kernel before 3.8.6 does not properly enforce capability requirements for controlling the PID value associated with a UNIX domain socket, which allows local users to bypass intended access restrictions by leveraging the time interval during which a user namespace has been created but a PID namespace has not been created. |
| CVE-2013-1957 | The clone_mnt function in fs/namespace.c in the Linux kernel before 3.8.6 does not properly restrict changes to the MNT_READONLY flag, which allows local users to bypass an intended read-only property of a filesystem by leveraging a separate mount namespace. |
| CVE-2013-1956 | The create_user_ns function in kernel/user_namespace.c in the Linux kernel before 3.8.6 does not check whether a chroot directory exists that differs from the namespace root directory, which allows local users to bypass intended filesystem restrictions via a crafted clone system call. |
| CVE-2013-1943 | The KVM subsystem in the Linux kernel before 3.0 does not check whether kernel addresses are specified during allocation of memory slots for use in a guest's physical address space, which allows local users to gain privileges or obtain sensitive information from kernel memory via a crafted application, related to arch/x86/kvm/paging_tmpl.h and virt/kvm/kvm_main.c. |
| CVE-2013-1935 | A certain Red Hat patch to the KVM subsystem in the kernel package before 2.6.32-358.11.1.el6 on Red Hat Enterprise Linux (RHEL) 6 does not properly implement the PV EOI feature, which allows guest OS users to cause a denial of service (host OS crash) by leveraging a time window during which interrupts are disabled but copy_to_user function calls are possible. |
| CVE-2013-1929 | Heap-based buffer overflow in the tg3_read_vpd function in drivers/net/ethernet/broadcom/tg3.c in the Linux kernel before 3.8.6 allows physically proximate attackers to cause a denial of service (system crash) or possibly execute arbitrary code via crafted firmware that specifies a long string in the Vital Product Data (VPD) data structure. |
| CVE-2013-1928 | The do_video_set_spu_palette function in fs/compat_ioctl.c in the Linux kernel before 3.6.5 on unspecified architectures lacks a certain error check, which might allow local users to obtain sensitive information from kernel stack memory via a crafted VIDEO_SET_SPU_PALETTE ioctl call on a /dev/dvb device. |
| CVE-2013-1860 | Heap-based buffer overflow in the wdm_in_callback function in drivers/usb/class/cdc-wdm.c in the Linux kernel before 3.8.4 allows physically proximate attackers to cause a denial of service (system crash) or possibly execute arbitrary code via a crafted cdc-wdm USB device. |
| CVE-2013-1858 | The clone system-call implementation in the Linux kernel before 3.8.3 does not properly handle a combination of the CLONE_NEWUSER and CLONE_FS flags, which allows local users to gain privileges by calling chroot and leveraging the sharing of the / directory between a parent process and a child process. |
| CVE-2013-1848 | fs/ext3/super.c in the Linux kernel before 3.8.4 uses incorrect arguments to functions in certain circumstances related to printk input, which allows local users to conduct format-string attacks and possibly gain privileges via a crafted application. |
| CVE-2013-1828 | The sctp_getsockopt_assoc_stats function in net/sctp/socket.c in the Linux kernel before 3.8.4 does not validate a size value before proceeding to a copy_from_user operation, which allows local users to gain privileges via a crafted application that contains an SCTP_GET_ASSOC_STATS getsockopt system call. |
| CVE-2013-1827 | net/dccp/ccid.h in the Linux kernel before 3.5.4 allows local users to gain privileges or cause a denial of service (NULL pointer dereference and system crash) by leveraging the CAP_NET_ADMIN capability for a certain (1) sender or (2) receiver getsockopt call. |
| CVE-2013-1826 | The xfrm_state_netlink function in net/xfrm/xfrm_user.c in the Linux kernel before 3.5.7 does not properly handle error conditions in dump_one_state function calls, which allows local users to gain privileges or cause a denial of service (NULL pointer dereference and system crash) by leveraging the CAP_NET_ADMIN capability. |
| CVE-2013-1819 | The _xfs_buf_find function in fs/xfs/xfs_buf.c in the Linux kernel before 3.7.6 does not validate block numbers, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by leveraging the ability to mount an XFS filesystem containing a metadata inode with an invalid extent map. |
| CVE-2013-1798 | The ioapic_read_indirect function in virt/kvm/ioapic.c in the Linux kernel through 3.8.4 does not properly handle a certain combination of invalid IOAPIC_REG_SELECT and IOAPIC_REG_WINDOW operations, which allows guest OS users to obtain sensitive information from host OS memory or cause a denial of service (host OS OOPS) via a crafted application. |
| CVE-2013-1797 | Use-after-free vulnerability in arch/x86/kvm/x86.c in the Linux kernel through 3.8.4 allows guest OS users to cause a denial of service (host OS memory corruption) or possibly have unspecified other impact via a crafted application that triggers use of a guest physical address (GPA) in (1) movable or (2) removable memory during an MSR_KVM_SYSTEM_TIME kvm_set_msr_common operation. |
| CVE-2013-1796 | The kvm_set_msr_common function in arch/x86/kvm/x86.c in the Linux kernel through 3.8.4 does not ensure a required time_page alignment during an MSR_KVM_SYSTEM_TIME operation, which allows guest OS users to cause a denial of service (buffer overflow and host OS memory corruption) or possibly have unspecified other impact via a crafted application. |
| CVE-2013-1792 | Race condition in the install_user_keyrings function in security/keys/process_keys.c in the Linux kernel before 3.8.3 allows local users to cause a denial of service (NULL pointer dereference and system crash) via crafted keyctl system calls that trigger keyring operations in simultaneous threads. |
| CVE-2013-1774 | The chase_port function in drivers/usb/serial/io_ti.c in the Linux kernel before 3.7.4 allows local users to cause a denial of service (NULL pointer dereference and system crash) via an attempted /dev/ttyUSB read or write operation on a disconnected Edgeport USB serial converter. |
| CVE-2013-1773 | Buffer overflow in the VFAT filesystem implementation in the Linux kernel before 3.3 allows local users to gain privileges or cause a denial of service (system crash) via a VFAT write operation on a filesystem with the utf8 mount option, which is not properly handled during UTF-8 to UTF-16 conversion. |
| CVE-2013-1772 | The log_prefix function in kernel/printk.c in the Linux kernel 3.x before 3.4.33 does not properly remove a prefix string from a syslog header, which allows local users to cause a denial of service (buffer overflow and system crash) by leveraging /dev/kmsg write access and triggering a call_console_drivers function call. |
| CVE-2013-1767 | Use-after-free vulnerability in the shmem_remount_fs function in mm/shmem.c in the Linux kernel before 3.7.10 allows local users to gain privileges or cause a denial of service (system crash) by remounting a tmpfs filesystem without specifying a required mpol (aka mempolicy) mount option. |
| CVE-2013-1763 | Array index error in the __sock_diag_rcv_msg function in net/core/sock_diag.c in the Linux kernel before 3.7.10 allows local users to gain privileges via a large family value in a Netlink message. |
| CVE-2013-1060 | A certain Ubuntu build procedure for perf, as distributed in the Linux kernel packages in Ubuntu 10.04 LTS, 12.04 LTS, 12.10, 13.04, and 13.10, sets the HOME environment variable to the ~buildd directory and consequently reads the system configuration file from the ~buildd directory, which allows local users to gain privileges by leveraging control over the buildd account. |
| CVE-2013-1059 | net/ceph/auth_none.c in the Linux kernel through 3.10 allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via an auth_reply message that triggers an attempted build_request operation. |
| CVE-2013-0914 | The flush_signal_handlers function in kernel/signal.c in the Linux kernel before 3.8.4 preserves the value of the sa_restorer field across an exec operation, which makes it easier for local users to bypass the ASLR protection mechanism via a crafted application containing a sigaction system call. |
| CVE-2013-0913 | Integer overflow in drivers/gpu/drm/i915/i915_gem_execbuffer.c in the i915 driver in the Direct Rendering Manager (DRM) subsystem in the Linux kernel through 3.8.3, as used in Google Chrome OS before 25.0.1364.173 and other products, allows local users to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact via a crafted application that triggers many relocation copies, and potentially leads to a race condition. |
| CVE-2013-0871 | Race condition in the ptrace functionality in the Linux kernel before 3.7.5 allows local users to gain privileges via a PTRACE_SETREGS ptrace system call in a crafted application, as demonstrated by ptrace_death. |
| CVE-2013-0349 | The hidp_setup_hid function in net/bluetooth/hidp/core.c in the Linux kernel before 3.7.6 does not properly copy a certain name field, which allows local users to obtain sensitive information from kernel memory by setting a long name and making an HIDPCONNADD ioctl call. |
| CVE-2013-0343 | The ipv6_create_tempaddr function in net/ipv6/addrconf.c in the Linux kernel through 3.8 does not properly handle problems with the generation of IPv6 temporary addresses, which allows remote attackers to cause a denial of service (excessive retries and address-generation outage), and consequently obtain sensitive information, via ICMPv6 Router Advertisement (RA) messages. |
| CVE-2013-0313 | The evm_update_evmxattr function in security/integrity/evm/evm_crypto.c in the Linux kernel before 3.7.5, when the Extended Verification Module (EVM) is enabled, allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via an attempted removexattr operation on an inode of a sockfs filesystem. |
| CVE-2013-0311 | The translate_desc function in drivers/vhost/vhost.c in the Linux kernel before 3.7 does not properly handle cross-region descriptors, which allows guest OS users to obtain host OS privileges by leveraging KVM guest OS privileges. |
| CVE-2013-0310 | The cipso_v4_validate function in net/ipv4/cipso_ipv4.c in the Linux kernel before 3.4.8 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via an IPOPT_CIPSO IP_OPTIONS setsockopt system call. |
| CVE-2013-0309 | arch/x86/include/asm/pgtable.h in the Linux kernel before 3.6.2, when transparent huge pages are used, does not properly support PROT_NONE memory regions, which allows local users to cause a denial of service (system crash) via a crafted application. |
| CVE-2013-0290 | The __skb_recv_datagram function in net/core/datagram.c in the Linux kernel before 3.8 does not properly handle the MSG_PEEK flag with zero-length data, which allows local users to cause a denial of service (infinite loop and system hang) via a crafted application. |
| CVE-2013-0268 | The msr_open function in arch/x86/kernel/msr.c in the Linux kernel before 3.7.6 allows local users to bypass intended capability restrictions by executing a crafted application as root, as demonstrated by msr32.c. |
| CVE-2013-0231 | The pciback_enable_msi function in the PCI backend driver (drivers/xen/pciback/conf_space_capability_msi.c) in Xen for the Linux kernel 2.6.18 and 3.8 allows guest OS users with PCI device access to cause a denial of service via a large number of kernel log messages. NOTE: some of these details are obtained from third party information. |
| CVE-2013-0228 | The xen_iret function in arch/x86/xen/xen-asm_32.S in the Linux kernel before 3.7.9 on 32-bit Xen paravirt_ops platforms does not properly handle an invalid value in the DS segment register, which allows guest OS users to gain guest OS privileges via a crafted application. |
| CVE-2013-0217 | Memory leak in drivers/net/xen-netback/netback.c in the Xen netback functionality in the Linux kernel before 3.7.8 allows guest OS users to cause a denial of service (memory consumption) by triggering certain error conditions. |
| CVE-2013-0216 | The Xen netback functionality in the Linux kernel before 3.7.8 allows guest OS users to cause a denial of service (loop) by triggering ring pointer corruption. |
| CVE-2013-0190 | The xen_failsafe_callback function in Xen for the Linux kernel 2.6.23 and other versions, when running a 32-bit PVOPS guest, allows local users to cause a denial of service (guest crash) by triggering an iret fault, leading to use of an incorrect stack pointer and stack corruption. |
| CVE-2013-0160 | The Linux kernel through 3.7.9 allows local users to obtain sensitive information about keystroke timing by using the inotify API on the /dev/ptmx device. |
| CVE-2012-6712 | In the Linux kernel before 3.4, a buffer overflow occurs in drivers/net/wireless/iwlwifi/iwl-agn-sta.c, which will cause at least memory corruption. |
| CVE-2012-6704 | The sock_setsockopt function in net/core/sock.c in the Linux kernel before 3.5 mishandles negative values of sk_sndbuf and sk_rcvbuf, which allows local users to cause a denial of service (memory corruption and system crash) or possibly have unspecified other impact by leveraging the CAP_NET_ADMIN capability for a crafted setsockopt system call with the (1) SO_SNDBUF or (2) SO_RCVBUF option. |
| CVE-2012-6703 | Integer overflow in the snd_compr_allocate_buffer function in sound/core/compress_offload.c in the ALSA subsystem in the Linux kernel before 3.6-rc6-next-20120917 allows local users to cause a denial of service (insufficient memory allocation) or possibly have unspecified other impact via a crafted SNDRV_COMPRESS_SET_PARAMS ioctl call. |
| CVE-2012-6701 | Integer overflow in fs/aio.c in the Linux kernel before 3.4.1 allows local users to cause a denial of service or possibly have unspecified other impact via a large AIO iovec. |
| CVE-2012-6689 | The netlink_sendmsg function in net/netlink/af_netlink.c in the Linux kernel before 3.5.5 does not validate the dst_pid field, which allows local users to have an unspecified impact by spoofing Netlink messages. |
| CVE-2012-6657 | The sock_setsockopt function in net/core/sock.c in the Linux kernel before 3.5.7 does not ensure that a keepalive action is associated with a stream socket, which allows local users to cause a denial of service (system crash) by leveraging the ability to create a raw socket. |
| CVE-2012-6647 | The futex_wait_requeue_pi function in kernel/futex.c in the Linux kernel before 3.5.1 does not ensure that calls have two different futex addresses, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a crafted FUTEX_WAIT_REQUEUE_PI command. |
| CVE-2012-6638 | The tcp_rcv_state_process function in net/ipv4/tcp_input.c in the Linux kernel before 3.2.24 allows remote attackers to cause a denial of service (kernel resource consumption) via a flood of SYN+FIN TCP packets, a different vulnerability than CVE-2012-2663. |
| CVE-2012-6549 | The isofs_export_encode_fh function in fs/isofs/export.c in the Linux kernel before 3.6 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel heap memory via a crafted application. |
| CVE-2012-6548 | The udf_encode_fh function in fs/udf/namei.c in the Linux kernel before 3.6 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel heap memory via a crafted application. |
| CVE-2012-6547 | The __tun_chr_ioctl function in drivers/net/tun.c in the Linux kernel before 3.6 does not initialize a certain structure, which allows local users to obtain sensitive information from kernel stack memory via a crafted application. |
| CVE-2012-6546 | The ATM implementation in the Linux kernel before 3.6 does not initialize certain structures, which allows local users to obtain sensitive information from kernel stack memory via a crafted application. |
| CVE-2012-6545 | The Bluetooth RFCOMM implementation in the Linux kernel before 3.6 does not properly initialize certain structures, which allows local users to obtain sensitive information from kernel memory via a crafted application. |
| CVE-2012-6544 | The Bluetooth protocol stack in the Linux kernel before 3.6 does not properly initialize certain structures, which allows local users to obtain sensitive information from kernel stack memory via a crafted application that targets the (1) L2CAP or (2) HCI implementation. |
| CVE-2012-6543 | The l2tp_ip6_getname function in net/l2tp/l2tp_ip6.c in the Linux kernel before 3.6 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel stack memory via a crafted application. |
| CVE-2012-6542 | The llc_ui_getname function in net/llc/af_llc.c in the Linux kernel before 3.6 has an incorrect return value in certain circumstances, which allows local users to obtain sensitive information from kernel stack memory via a crafted application that leverages an uninitialized pointer argument. |
| CVE-2012-6541 | The ccid3_hc_tx_getsockopt function in net/dccp/ccids/ccid3.c in the Linux kernel before 3.6 does not initialize a certain structure, which allows local users to obtain sensitive information from kernel stack memory via a crafted application. |
| CVE-2012-6540 | The do_ip_vs_get_ctl function in net/netfilter/ipvs/ip_vs_ctl.c in the Linux kernel before 3.6 does not initialize a certain structure for IP_VS_SO_GET_TIMEOUT commands, which allows local users to obtain sensitive information from kernel stack memory via a crafted application. |
| CVE-2012-6539 | The dev_ifconf function in net/socket.c in the Linux kernel before 3.6 does not initialize a certain structure, which allows local users to obtain sensitive information from kernel stack memory via a crafted application. |
| CVE-2012-6538 | The copy_to_user_auth function in net/xfrm/xfrm_user.c in the Linux kernel before 3.6 uses an incorrect C library function for copying a string, which allows local users to obtain sensitive information from kernel heap memory by leveraging the CAP_NET_ADMIN capability. |
| CVE-2012-6537 | net/xfrm/xfrm_user.c in the Linux kernel before 3.6 does not initialize certain structures, which allows local users to obtain sensitive information from kernel memory by leveraging the CAP_NET_ADMIN capability. |
| CVE-2012-6536 | net/xfrm/xfrm_user.c in the Linux kernel before 3.6 does not verify that the actual Netlink message length is consistent with a certain header field, which allows local users to obtain sensitive information from kernel heap memory by leveraging the CAP_NET_ADMIN capability and providing a (1) new or (2) updated state. |
| CVE-2012-5532 | The main function in tools/hv/hv_kvp_daemon.c in hypervkvpd, as distributed in the Linux kernel before 3.8-rc1, allows local users to cause a denial of service (daemon exit) via a crafted application that sends a Netlink message. NOTE: this vulnerability exists because of an incorrect fix for CVE-2012-2669. |
| CVE-2012-5517 | The online_pages function in mm/memory_hotplug.c in the Linux kernel before 3.6 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact in opportunistic circumstances by using memory that was hot-added by an administrator. |
| CVE-2012-5375 | The CRC32C feature in the Btrfs implementation in the Linux kernel before 3.8-rc1 allows local users to cause a denial of service (prevention of file creation) by leveraging the ability to write to a directory important to the victim, and creating a file with a crafted name that is associated with a specific CRC32C hash value. |
| CVE-2012-5374 | The CRC32C feature in the Btrfs implementation in the Linux kernel before 3.8-rc1 allows local users to cause a denial of service (extended runtime of kernel code) by creating many different files whose names are associated with the same CRC32C hash value. |
| CVE-2012-4565 | The tcp_illinois_info function in net/ipv4/tcp_illinois.c in the Linux kernel before 3.4.19, when the net.ipv4.tcp_congestion_control illinois setting is enabled, allows local users to cause a denial of service (divide-by-zero error and OOPS) by reading TCP stats. |
| CVE-2012-4542 | block/scsi_ioctl.c in the Linux kernel through 3.8 does not properly consider the SCSI device class during authorization of SCSI commands, which allows local users to bypass intended access restrictions via an SG_IO ioctl call that leverages overlapping opcodes. |
| CVE-2012-4530 | The load_script function in fs/binfmt_script.c in the Linux kernel before 3.7.2 does not properly handle recursion, which allows local users to obtain sensitive information from kernel stack memory via a crafted application. |
| CVE-2012-4508 | Race condition in fs/ext4/extents.c in the Linux kernel before 3.4.16 allows local users to obtain sensitive information from a deleted file by reading an extent that was not properly marked as uninitialized. |
| CVE-2012-4467 | The (1) do_siocgstamp and (2) do_siocgstampns functions in net/socket.c in the Linux kernel before 3.5.4 use an incorrect argument order, which allows local users to obtain sensitive information from kernel memory or cause a denial of service (system crash) via a crafted ioctl call. |
| CVE-2012-4461 | The KVM subsystem in the Linux kernel before 3.6.9, when running on hosts that use qemu userspace without XSAVE, allows local users to cause a denial of service (kernel OOPS) by using the KVM_SET_SREGS ioctl to set the X86_CR4_OSXSAVE bit in the guest cr4 register, then calling the KVM_RUN ioctl. |
| CVE-2012-4444 | The ip6_frag_queue function in net/ipv6/reassembly.c in the Linux kernel before 2.6.36 allows remote attackers to bypass intended network restrictions via overlapping IPv6 fragments. |
| CVE-2012-4398 | The __request_module function in kernel/kmod.c in the Linux kernel before 3.4 does not set a certain killable attribute, which allows local users to cause a denial of service (memory consumption) via a crafted application. |
| CVE-2012-3552 | Race condition in the IP implementation in the Linux kernel before 3.0 might allow remote attackers to cause a denial of service (slab corruption and system crash) by sending packets to an application that sets socket options during the handling of network traffic. |
| CVE-2012-3520 | The Netlink implementation in the Linux kernel before 3.2.30 does not properly handle messages that lack SCM_CREDENTIALS data, which might allow local users to spoof Netlink communication via a crafted message, as demonstrated by a message to (1) Avahi or (2) NetworkManager. |
| CVE-2012-3511 | Multiple race conditions in the madvise_remove function in mm/madvise.c in the Linux kernel before 3.4.5 allow local users to cause a denial of service (use-after-free and system crash) via vectors involving a (1) munmap or (2) close system call. |
| CVE-2012-3510 | Use-after-free vulnerability in the xacct_add_tsk function in kernel/tsacct.c in the Linux kernel before 2.6.19 allows local users to obtain potentially sensitive information from kernel memory or cause a denial of service (system crash) via a taskstats TASKSTATS_CMD_ATTR_PID command. |
| CVE-2012-3430 | The rds_recvmsg function in net/rds/recv.c in the Linux kernel before 3.0.44 does not initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a (1) recvfrom or (2) recvmsg system call on an RDS socket. |
| CVE-2012-3412 | The sfc (aka Solarflare Solarstorm) driver in the Linux kernel before 3.2.30 allows remote attackers to cause a denial of service (DMA descriptor consumption and network-controller outage) via crafted TCP packets that trigger a small MSS value. |
| CVE-2012-3400 | Heap-based buffer overflow in the udf_load_logicalvol function in fs/udf/super.c in the Linux kernel before 3.4.5 allows remote attackers to cause a denial of service (system crash) or possibly have unspecified other impact via a crafted UDF filesystem. |
| CVE-2012-3375 | The epoll_ctl system call in fs/eventpoll.c in the Linux kernel before 3.2.24 does not properly handle ELOOP errors in EPOLL_CTL_ADD operations, which allows local users to cause a denial of service (file-descriptor consumption and system crash) via a crafted application that attempts to create a circular epoll dependency. NOTE: this vulnerability exists because of an incorrect fix for CVE-2011-1083. |
| CVE-2012-3364 | Multiple stack-based buffer overflows in the Near Field Communication Controller Interface (NCI) in the Linux kernel before 3.4.5 allow remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via incoming frames with crafted length fields. |
| CVE-2012-2745 | The copy_creds function in kernel/cred.c in the Linux kernel before 3.3.2 provides an invalid replacement session keyring to a child process, which allows local users to cause a denial of service (panic) via a crafted application that uses the fork system call. |
| CVE-2012-2744 | net/ipv6/netfilter/nf_conntrack_reasm.c in the Linux kernel before 2.6.34, when the nf_conntrack_ipv6 module is enabled, allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) via certain types of fragmented IPv6 packets. |
| CVE-2012-2669 | The main function in tools/hv/hv_kvp_daemon.c in hypervkvpd, as distributed in the Linux kernel before 3.4.5, does not validate the origin of Netlink messages, which allows local users to spoof Netlink communication via a crafted connector message. |
| CVE-2012-2390 | Memory leak in mm/hugetlb.c in the Linux kernel before 3.4.2 allows local users to cause a denial of service (memory consumption or system crash) via invalid MAP_HUGETLB mmap operations. |
| CVE-2012-2384 | Integer overflow in the i915_gem_do_execbuffer function in drivers/gpu/drm/i915/i915_gem_execbuffer.c in the Direct Rendering Manager (DRM) subsystem in the Linux kernel before 3.3.5 on 32-bit platforms allows local users to cause a denial of service (out-of-bounds write) or possibly have unspecified other impact via a crafted ioctl call. |
| CVE-2012-2383 | Integer overflow in the i915_gem_execbuffer2 function in drivers/gpu/drm/i915/i915_gem_execbuffer.c in the Direct Rendering Manager (DRM) subsystem in the Linux kernel before 3.3.5 on 32-bit platforms allows local users to cause a denial of service (out-of-bounds write) or possibly have unspecified other impact via a crafted ioctl call. |
| CVE-2012-2375 | The __nfs4_get_acl_uncached function in fs/nfs/nfs4proc.c in the NFSv4 implementation in the Linux kernel before 3.3.2 uses an incorrect length variable during a copy operation, which allows remote NFS servers to cause a denial of service (OOPS) by sending an excessive number of bitmap words in an FATTR4_ACL reply. NOTE: this vulnerability exists because of an incomplete fix for CVE-2011-4131. |
| CVE-2012-2373 | The Linux kernel before 3.4.5 on the x86 platform, when Physical Address Extension (PAE) is enabled, does not properly use the Page Middle Directory (PMD), which allows local users to cause a denial of service (panic) via a crafted application that triggers a race condition. |
| CVE-2012-2372 | The rds_ib_xmit function in net/rds/ib_send.c in the Reliable Datagram Sockets (RDS) protocol implementation in the Linux kernel 3.7.4 and earlier allows local users to cause a denial of service (BUG_ON and kernel panic) by establishing an RDS connection with the source IP address equal to the IPoIB interface's own IP address, as demonstrated by rds-ping. |
| CVE-2012-2319 | Multiple buffer overflows in the hfsplus filesystem implementation in the Linux kernel before 3.3.5 allow local users to gain privileges via a crafted HFS plus filesystem, a related issue to CVE-2009-4020. |
| CVE-2012-2313 | The rio_ioctl function in drivers/net/ethernet/dlink/dl2k.c in the Linux kernel before 3.3.7 does not restrict access to the SIOCSMIIREG command, which allows local users to write data to an Ethernet adapter via an ioctl call. |
| CVE-2012-2137 | Buffer overflow in virt/kvm/irq_comm.c in the KVM subsystem in the Linux kernel before 3.2.24 allows local users to cause a denial of service (crash) and possibly execute arbitrary code via vectors related to Message Signaled Interrupts (MSI), irq routing entries, and an incorrect check by the setup_routing_entry function before invoking the kvm_set_irq function. |
| CVE-2012-2136 | The sock_alloc_send_pskb function in net/core/sock.c in the Linux kernel before 3.4.5 does not properly validate a certain length value, which allows local users to cause a denial of service (heap-based buffer overflow and system crash) or possibly gain privileges by leveraging access to a TUN/TAP device. |
| CVE-2012-2133 | Use-after-free vulnerability in the Linux kernel before 3.3.6, when huge pages are enabled, allows local users to cause a denial of service (system crash) or possibly gain privileges by interacting with a hugetlbfs filesystem, as demonstrated by a umount operation that triggers improper handling of quota data. |
| CVE-2012-2127 | fs/proc/root.c in the procfs implementation in the Linux kernel before 3.2 does not properly interact with CLONE_NEWPID clone system calls, which allows remote attackers to cause a denial of service (reference leak and memory consumption) by making many connections to a daemon that uses PID namespaces to isolate clients, as demonstrated by vsftpd. |
| CVE-2012-2123 | The cap_bprm_set_creds function in security/commoncap.c in the Linux kernel before 3.3.3 does not properly handle the use of file system capabilities (aka fcaps) for implementing a privileged executable file, which allows local users to bypass intended personality restrictions via a crafted application, as demonstrated by an attack that uses a parent process to disable ASLR. |
| CVE-2012-2121 | The KVM implementation in the Linux kernel before 3.3.4 does not properly manage the relationships between memory slots and the iommu, which allows guest OS users to cause a denial of service (memory leak and host OS crash) by leveraging administrative access to the guest OS to conduct hotunplug and hotplug operations on devices. |
| CVE-2012-2119 | Buffer overflow in the macvtap device driver in the Linux kernel before 3.4.5, when running in certain configurations, allows privileged KVM guest users to cause a denial of service (crash) via a long descriptor with a long vector length. |
| CVE-2012-2100 | The ext4_fill_flex_info function in fs/ext4/super.c in the Linux kernel before 3.2.2, on the x86 platform and unspecified other platforms, allows user-assisted remote attackers to trigger inconsistent filesystem-groups data and possibly cause a denial of service via a malformed ext4 filesystem containing a super block with a large FLEX_BG group size (aka s_log_groups_per_flex value). NOTE: this vulnerability exists because of an incomplete fix for CVE-2009-4307. |
| CVE-2012-1601 | The KVM implementation in the Linux kernel before 3.3.6 allows host OS users to cause a denial of service (NULL pointer dereference and host OS crash) by making a KVM_CREATE_IRQCHIP ioctl call after a virtual CPU already exists. |
| CVE-2012-1583 | Double free vulnerability in the xfrm6_tunnel_rcv function in net/ipv6/xfrm6_tunnel.c in the Linux kernel before 2.6.22, when the xfrm6_tunnel module is enabled, allows remote attackers to cause a denial of service (panic) via crafted IPv6 packets. |
| CVE-2012-1568 | The ExecShield feature in a certain Red Hat patch for the Linux kernel in Red Hat Enterprise Linux (RHEL) 5 and 6 and Fedora 15 and 16 does not properly handle use of many shared libraries by a 32-bit executable file, which makes it easier for context-dependent attackers to bypass the ASLR protection mechanism by leveraging a predictable base address for one of these libraries. |
| CVE-2012-1179 | The Linux kernel before 3.3.1, when KVM is used, allows guest OS users to cause a denial of service (host OS crash) by leveraging administrative access to the guest OS, related to the pmd_none_or_clear_bad function and page faults for huge pages. |
| CVE-2012-1146 | The mem_cgroup_usage_unregister_event function in mm/memcontrol.c in the Linux kernel before 3.2.10 does not properly handle multiple events that are attached to the same eventfd, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by registering memory threshold events. |
| CVE-2012-1097 | The regset (aka register set) feature in the Linux kernel before 3.2.10 does not properly handle the absence of .get and .set methods, which allows local users to cause a denial of service (NULL pointer dereference) or possibly have unspecified other impact via a (1) PTRACE_GETREGSET or (2) PTRACE_SETREGSET ptrace call. |
| CVE-2012-1090 | The cifs_lookup function in fs/cifs/dir.c in the Linux kernel before 3.2.10 allows local users to cause a denial of service (OOPS) via attempted access to a special file, as demonstrated by a FIFO. |
| CVE-2012-0957 | The override_release function in kernel/sys.c in the Linux kernel before 3.4.16 allows local users to obtain sensitive information from kernel stack memory via a uname system call in conjunction with a UNAME26 personality. |
| CVE-2012-0953 | A race condition was discovered in the Linux drivers for Nvidia graphics which allowed an attacker to exfiltrate kernel memory to userspace. This issue was fixed in version 295.53. |
| CVE-2012-0879 | The I/O implementation for block devices in the Linux kernel before 2.6.33 does not properly handle the CLONE_IO feature, which allows local users to cause a denial of service (I/O instability) by starting multiple processes that share an I/O context. |
| CVE-2012-0810 | The int3 handler in the Linux kernel before 3.3 relies on a per-CPU debug stack, which allows local users to cause a denial of service (stack corruption and panic) via a crafted application that triggers certain lock contention. |
| CVE-2012-0207 | The igmp_heard_query function in net/ipv4/igmp.c in the Linux kernel before 3.2.1 allows remote attackers to cause a denial of service (divide-by-zero error and panic) via IGMP packets. |
| CVE-2012-0058 | The kiocb_batch_free function in fs/aio.c in the Linux kernel before 3.2.2 allows local users to cause a denial of service (OOPS) via vectors that trigger incorrect iocb management. |
| CVE-2012-0056 | The mem_write function in the Linux kernel before 3.2.2, when ASLR is disabled, does not properly check permissions when writing to /proc/<pid>/mem, which allows local users to gain privileges by modifying process memory, as demonstrated by Mempodipper. |
| CVE-2012-0055 | OverlayFS in the Linux kernel before 3.0.0-16.28, as used in Ubuntu 10.0.4 LTS and 11.10, is missing inode security checks which could allow attackers to bypass security restrictions and perform unauthorized actions. |
| CVE-2012-0045 | The em_syscall function in arch/x86/kvm/emulate.c in the KVM implementation in the Linux kernel before 3.2.14 does not properly handle the 0f05 (aka syscall) opcode, which allows guest OS users to cause a denial of service (guest OS crash) via a crafted application, as demonstrated by an NASM file. |
| CVE-2012-0044 | Integer overflow in the drm_mode_dirtyfb_ioctl function in drivers/gpu/drm/drm_crtc.c in the Direct Rendering Manager (DRM) subsystem in the Linux kernel before 3.1.5 allows local users to gain privileges or cause a denial of service (memory corruption) via a crafted ioctl call. |
| CVE-2012-0038 | Integer overflow in the xfs_acl_from_disk function in fs/xfs/xfs_acl.c in the Linux kernel before 3.1.9 allows local users to cause a denial of service (panic) via a filesystem with a malformed ACL, leading to a heap-based buffer overflow. |
| CVE-2012-0028 | The robust futex implementation in the Linux kernel before 2.6.28 does not properly handle processes that make exec system calls, which allows local users to cause a denial of service or possibly gain privileges by writing to a memory location in a child process. |
| CVE-2011-5327 | In the Linux kernel before 3.1, an off by one in the drivers/target/loopback/tcm_loop.c tcm_loop_make_naa_tpg() function could result in at least memory corruption. |
| CVE-2011-5321 | The tty_open function in drivers/tty/tty_io.c in the Linux kernel before 3.1.1 mishandles a driver-lookup failure, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via crafted access to a device file under the /dev/pts directory. |
| CVE-2011-4917 | In the Linux kernel through 3.1 there is an information disclosure issue via /proc/stat. |
| CVE-2011-4916 | Linux kernel through 3.1 allows local users to obtain sensitive keystroke information via access to /dev/pts/ and /dev/tty*. |
| CVE-2011-4915 | fs/proc/base.c in the Linux kernel through 3.1 allows local users to obtain sensitive keystroke information via access to /proc/interrupts. |
| CVE-2011-4914 | The ROSE protocol implementation in the Linux kernel before 2.6.39 does not verify that certain data-length values are consistent with the amount of data sent, which might allow remote attackers to obtain sensitive information from kernel memory or cause a denial of service (out-of-bounds read) via crafted data to a ROSE socket. |
| CVE-2011-4913 | The rose_parse_ccitt function in net/rose/rose_subr.c in the Linux kernel before 2.6.39 does not validate the FAC_CCITT_DEST_NSAP and FAC_CCITT_SRC_NSAP fields, which allows remote attackers to (1) cause a denial of service (integer underflow, heap memory corruption, and panic) via a small length value in data sent to a ROSE socket, or (2) conduct stack-based buffer overflow attacks via a large length value in data sent to a ROSE socket. |
| CVE-2011-4621 | The Linux kernel before 2.6.37 does not properly implement a certain clock-update optimization, which allows local users to cause a denial of service (system hang) via an application that executes code in a loop. |
| CVE-2011-4611 | Integer overflow in the perf_event_interrupt function in arch/powerpc/kernel/perf_event.c in the Linux kernel before 2.6.39 on powerpc platforms allows local users to cause a denial of service (unhandled performance monitor exception) via vectors that trigger certain outcomes of performance events. |
| CVE-2011-4604 | The bat_socket_read function in net/batman-adv/icmp_socket.c in the Linux kernel before 3.3 allows remote attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via a crafted batman-adv ICMP packet. |
| CVE-2011-4594 | The __sys_sendmsg function in net/socket.c in the Linux kernel before 3.1 allows local users to cause a denial of service (system crash) via crafted use of the sendmmsg system call, leading to an incorrect pointer dereference. |
| CVE-2011-4348 | Race condition in the sctp_rcv function in net/sctp/input.c in the Linux kernel before 2.6.29 allows remote attackers to cause a denial of service (system hang) via SCTP packets. NOTE: in some environments, this issue exists because of an incomplete fix for CVE-2011-2482. |
| CVE-2011-4347 | The kvm_vm_ioctl_assign_device function in virt/kvm/assigned-dev.c in the KVM subsystem in the Linux kernel before 3.1.10 does not verify permission to access PCI configuration space and BAR resources, which allows host OS users to assign PCI devices and cause a denial of service (host OS crash) via a KVM_ASSIGN_PCI_DEVICE operation. |
| CVE-2011-4330 | Stack-based buffer overflow in the hfs_mac2asc function in fs/hfs/trans.c in the Linux kernel 2.6 allows local users to cause a denial of service (crash) and possibly execute arbitrary code via an HFS image with a crafted len field. |
| CVE-2011-4326 | The udp6_ufo_fragment function in net/ipv6/udp.c in the Linux kernel before 2.6.39, when a certain UDP Fragmentation Offload (UFO) configuration is enabled, allows remote attackers to cause a denial of service (system crash) by sending fragmented IPv6 UDP packets to a bridge device. |
| CVE-2011-4325 | The NFS implementation in Linux kernel before 2.6.31-rc6 calls certain functions without properly initializing certain data, which allows local users to cause a denial of service (NULL pointer dereference and O_DIRECT oops), as demonstrated using diotest4 from LTP. |
| CVE-2011-4324 | The encode_share_access function in fs/nfs/nfs4xdr.c in the Linux kernel before 2.6.29 allows local users to cause a denial of service (BUG and system crash) by using the mknod system call with a pathname on an NFSv4 filesystem. |
| CVE-2011-4132 | The cleanup_journal_tail function in the Journaling Block Device (JBD) functionality in the Linux kernel 2.6 allows local users to cause a denial of service (assertion error and kernel oops) via an ext3 or ext4 image with an "invalid log first block value." |
| CVE-2011-4131 | The NFSv4 implementation in the Linux kernel before 3.2.2 does not properly handle bitmap sizes in GETACL replies, which allows remote NFS servers to cause a denial of service (OOPS) by sending an excessive number of bitmap words. |
| CVE-2011-4127 | The Linux kernel before 3.2.2 does not properly restrict SG_IO ioctl calls, which allows local users to bypass intended restrictions on disk read and write operations by sending a SCSI command to (1) a partition block device or (2) an LVM volume. |
| CVE-2011-4112 | The net subsystem in the Linux kernel before 3.1 does not properly restrict use of the IFF_TX_SKB_SHARING flag, which allows local users to cause a denial of service (panic) by leveraging the CAP_NET_ADMIN capability to access /proc/net/pktgen/pgctrl, and then using the pktgen package in conjunction with a bridge device for a VLAN interface. |
| CVE-2011-4110 | The user_update function in security/keys/user_defined.c in the Linux kernel 2.6 allows local users to cause a denial of service (NULL pointer dereference and kernel oops) via vectors related to a user-defined key and "updating a negative key into a fully instantiated key." |
| CVE-2011-4098 | The fallocate implementation in the GFS2 filesystem in the Linux kernel before 3.2 relies on the page cache, which might allow local users to cause a denial of service by preallocating blocks in certain situations involving insufficient memory. |
| CVE-2011-4097 | Integer overflow in the oom_badness function in mm/oom_kill.c in the Linux kernel before 3.1.8 on 64-bit platforms allows local users to cause a denial of service (memory consumption or process termination) by using a certain large amount of memory. |
| CVE-2011-4087 | The br_parse_ip_options function in net/bridge/br_netfilter.c in the Linux kernel before 2.6.39 does not properly initialize a certain data structure, which allows remote attackers to cause a denial of service by leveraging connectivity to a network interface that uses an Ethernet bridge device. |
| CVE-2011-4086 | The journal_unmap_buffer function in fs/jbd2/transaction.c in the Linux kernel before 3.3.1 does not properly handle the _Delay and _Unwritten buffer head states, which allows local users to cause a denial of service (system crash) by leveraging the presence of an ext4 filesystem that was mounted with a journal. |
| CVE-2011-4081 | crypto/ghash-generic.c in the Linux kernel before 3.1 allows local users to cause a denial of service (NULL pointer dereference and OOPS) or possibly have unspecified other impact by triggering a failed or missing ghash_setkey function call, followed by a (1) ghash_update function call or (2) ghash_final function call, as demonstrated by a write operation on an AF_ALG socket. |
| CVE-2011-4080 | The sysrq_sysctl_handler function in kernel/sysctl.c in the Linux kernel before 2.6.39 does not require the CAP_SYS_ADMIN capability to modify the dmesg_restrict value, which allows local users to bypass intended access restrictions and read the kernel ring buffer by leveraging root privileges, as demonstrated by a root user in a Linux Containers (aka LXC) environment. |
| CVE-2011-4077 | Buffer overflow in the xfs_readlink function in fs/xfs/xfs_vnodeops.c in XFS in the Linux kernel 2.6, when CONFIG_XFS_DEBUG is disabled, allows local users to cause a denial of service (memory corruption and crash) and possibly execute arbitrary code via an XFS image containing a symbolic link with a long pathname. |
| CVE-2011-4062 | Buffer overflow in the kernel in FreeBSD 7.3 through 9.0-RC1 allows local users to cause a denial of service (panic) or possibly gain privileges via a bind system call with a long pathname for a UNIX socket. |
| CVE-2011-3638 | fs/ext4/extents.c in the Linux kernel before 3.0 does not mark a modified extent as dirty in certain cases of extent splitting, which allows local users to cause a denial of service (system crash) via vectors involving ext4 umount and mount operations. |
| CVE-2011-3637 | The m_stop function in fs/proc/task_mmu.c in the Linux kernel before 2.6.39 allows local users to cause a denial of service (OOPS) via vectors that trigger an m_start error. |
| CVE-2011-3619 | The apparmor_setprocattr function in security/apparmor/lsm.c in the Linux kernel before 3.0 does not properly handle invalid parameters, which allows local users to cause a denial of service (NULL pointer dereference and OOPS) or possibly have unspecified other impact by writing to a /proc/#####/attr/current file. |
| CVE-2011-3593 | A certain Red Hat patch to the vlan_hwaccel_do_receive function in net/8021q/vlan_core.c in the Linux kernel 2.6.32 on Red Hat Enterprise Linux (RHEL) 6 allows remote attackers to cause a denial of service (system crash) via priority-tagged VLAN frames. |
| CVE-2011-3363 | The setup_cifs_sb function in fs/cifs/connect.c in the Linux kernel before 2.6.39 does not properly handle DFS referrals, which allows remote CIFS servers to cause a denial of service (system crash) by placing a referral at the root of a share. |
| CVE-2011-3359 | The dma_rx function in drivers/net/wireless/b43/dma.c in the Linux kernel before 2.6.39 does not properly allocate receive buffers, which allows remote attackers to cause a denial of service (system crash) via a crafted frame. |
| CVE-2011-3353 | Buffer overflow in the fuse_notify_inval_entry function in fs/fuse/dev.c in the Linux kernel before 3.1 allows local users to cause a denial of service (BUG_ON and system crash) by leveraging the ability to mount a FUSE filesystem. |
| CVE-2011-3347 | A certain Red Hat patch to the be2net implementation in the kernel package before 2.6.32-218.el6 on Red Hat Enterprise Linux (RHEL) 6, when promiscuous mode is enabled, allows remote attackers to cause a denial of service (system crash) via non-member VLAN packets. |
| CVE-2011-3209 | The div_long_long_rem implementation in include/asm-x86/div64.h in the Linux kernel before 2.6.26 on the x86 platform allows local users to cause a denial of service (Divide Error Fault and panic) via a clock_gettime system call. |
| CVE-2011-3191 | Integer signedness error in the CIFSFindNext function in fs/cifs/cifssmb.c in the Linux kernel before 3.1 allows remote CIFS servers to cause a denial of service (memory corruption) or possibly have unspecified other impact via a large length value in a response to a read request for a directory. |
| CVE-2011-3188 | The (1) IPv4 and (2) IPv6 implementations in the Linux kernel before 3.1 use a modified MD4 algorithm to generate sequence numbers and Fragment Identification values, which makes it easier for remote attackers to cause a denial of service (disrupted networking) or hijack network sessions by predicting these values and sending crafted packets. |
| CVE-2011-2942 | A certain Red Hat patch to the __br_deliver function in net/bridge/br_forward.c in the Linux kernel 2.6.18 on Red Hat Enterprise Linux (RHEL) 5 allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by leveraging connectivity to a network interface that uses an Ethernet bridge device. |
| CVE-2011-2928 | The befs_follow_link function in fs/befs/linuxvfs.c in the Linux kernel before 3.1-rc3 does not validate the length attribute of long symlinks, which allows local users to cause a denial of service (incorrect pointer dereference and OOPS) by accessing a long symlink on a malformed Be filesystem. |
| CVE-2011-2918 | The Performance Events subsystem in the Linux kernel before 3.1 does not properly handle event overflows associated with PERF_COUNT_SW_CPU_CLOCK events, which allows local users to cause a denial of service (system hang) via a crafted application. |
| CVE-2011-2909 | The do_devinfo_ioctl function in drivers/staging/comedi/comedi_fops.c in the Linux kernel before 3.1 allows local users to obtain sensitive information from kernel memory via a copy of a short string. |
| CVE-2011-2906 | ** DISPUTED ** Integer signedness error in the pmcraid_ioctl_passthrough function in drivers/scsi/pmcraid.c in the Linux kernel before 3.1 might allow local users to cause a denial of service (memory consumption or memory corruption) via a negative size value in an ioctl call. NOTE: this may be a vulnerability only in unusual environments that provide a privileged program for obtaining the required file descriptor. |
| CVE-2011-2905 | Untrusted search path vulnerability in the perf_config function in tools/perf/util/config.c in perf, as distributed in the Linux kernel before 3.1, allows local users to overwrite arbitrary files via a crafted config file in the current working directory. |
| CVE-2011-2898 | net/packet/af_packet.c in the Linux kernel before 2.6.39.3 does not properly restrict user-space access to certain packet data structures associated with VLAN Tag Control Information, which allows local users to obtain potentially sensitive information via a crafted application. |
| CVE-2011-2723 | The skb_gro_header_slow function in include/linux/netdevice.h in the Linux kernel before 2.6.39.4, when Generic Receive Offload (GRO) is enabled, resets certain fields in incorrect situations, which allows remote attackers to cause a denial of service (system crash) via crafted network traffic. |
| CVE-2011-2707 | The ptrace_setxregs function in arch/xtensa/kernel/ptrace.c in the Linux kernel before 3.1 does not validate user-space pointers, which allows local users to obtain sensitive information from kernel memory locations via a crafted PTRACE_SETXTREGS request. |
| CVE-2011-2700 | Multiple buffer overflows in the si4713_write_econtrol_string function in drivers/media/radio/si4713-i2c.c in the Linux kernel before 2.6.39.4 on the N900 platform might allow local users to cause a denial of service or have unspecified other impact via a crafted s_ext_ctrls operation with a (1) V4L2_CID_RDS_TX_PS_NAME or (2) V4L2_CID_RDS_TX_RADIO_TEXT control ID. |
| CVE-2011-2699 | The IPv6 implementation in the Linux kernel before 3.1 does not generate Fragment Identification values separately for each destination, which makes it easier for remote attackers to cause a denial of service (disrupted networking) by predicting these values and sending crafted packets. |
| CVE-2011-2695 | Multiple off-by-one errors in the ext4 subsystem in the Linux kernel before 3.0-rc5 allow local users to cause a denial of service (BUG_ON and system crash) by accessing a sparse file in extent format with a write operation involving a block number corresponding to the largest possible 32-bit unsigned integer. |
| CVE-2011-2693 | The perf subsystem in the kernel package 2.6.32-122.el6.x86_64 in Red Hat Enterprise Linux (RHEL) 6 does not properly handle NMIs, which might allow local users to cause a denial of service (excessive log messages) via unspecified vectors. |
| CVE-2011-2689 | The gfs2_fallocate function in fs/gfs2/file.c in the Linux kernel before 3.0-rc1 does not ensure that the size of a chunk allocation is a multiple of the block size, which allows local users to cause a denial of service (BUG and system crash) by arranging for all resource groups to have too little free space. |
| CVE-2011-2534 | Buffer overflow in the clusterip_proc_write function in net/ipv4/netfilter/ipt_CLUSTERIP.c in the Linux kernel before 2.6.39 might allow local users to cause a denial of service or have unspecified other impact via a crafted write operation, related to string data that lacks a terminating '\0' character. |
| CVE-2011-2525 | The qdisc_notify function in net/sched/sch_api.c in the Linux kernel before 2.6.35 does not prevent tc_fill_qdisc function calls referencing builtin (aka CQ_F_BUILTIN) Qdisc structures, which allows local users to cause a denial of service (NULL pointer dereference and OOPS) or possibly have unspecified other impact via a crafted call. |
| CVE-2011-2521 | The x86_assign_hw_event function in arch/x86/kernel/cpu/perf_event.c in the Performance Events subsystem in the Linux kernel before 2.6.39 does not properly calculate counter values, which allows local users to cause a denial of service (panic) via the perf program. |
| CVE-2011-2519 | Xen in the Linux kernel, when running a guest on a host without hardware assisted paging (HAP), allows guest users to cause a denial of service (invalid pointer dereference and hypervisor crash) via the SAHF instruction. |
| CVE-2011-2518 | The tomoyo_mount_acl function in security/tomoyo/mount.c in the Linux kernel before 2.6.39.2 calls the kern_path function with arguments taken directly from a mount system call, which allows local users to cause a denial of service (OOPS) or possibly have unspecified other impact via a NULL value for the device name. |
| CVE-2011-2517 | Multiple buffer overflows in net/wireless/nl80211.c in the Linux kernel before 2.6.39.2 allow local users to gain privileges by leveraging the CAP_NET_ADMIN capability during scan operations with a long SSID value. |
| CVE-2011-2500 | The host_reliable_addrinfo function in support/export/hostname.c in nfs-utils before 1.2.4 does not properly use DNS to verify access to NFS exports, which allows remote attackers to mount filesystems by establishing crafted DNS A and PTR records. |
| CVE-2011-2498 | The Linux kernel from v2.3.36 before v2.6.39 allows local unprivileged users to cause a denial of service (memory consumption) by triggering creation of PTE pages. |
| CVE-2011-2497 | Integer underflow in the l2cap_config_req function in net/bluetooth/l2cap_core.c in the Linux kernel before 3.0 allows remote attackers to cause a denial of service (heap memory corruption) or possibly have unspecified other impact via a small command-size value within the command header of a Logical Link Control and Adaptation Protocol (L2CAP) configuration request, leading to a buffer overflow. |
| CVE-2011-2496 | Integer overflow in the vma_to_resize function in mm/mremap.c in the Linux kernel before 2.6.39 allows local users to cause a denial of service (BUG_ON and system crash) via a crafted mremap system call that expands a memory mapping. |
| CVE-2011-2495 | fs/proc/base.c in the Linux kernel before 2.6.39.4 does not properly restrict access to /proc/#####/io files, which allows local users to obtain sensitive I/O statistics by polling a file, as demonstrated by discovering the length of another user's password. |
| CVE-2011-2494 | kernel/taskstats.c in the Linux kernel before 3.1 allows local users to obtain sensitive I/O statistics by sending taskstats commands to a netlink socket, as demonstrated by discovering the length of another user's password. |
| CVE-2011-2493 | The ext4_fill_super function in fs/ext4/super.c in the Linux kernel before 2.6.39 does not properly initialize a certain error-report data structure, which allows local users to cause a denial of service (OOPS) by attempting to mount a crafted ext4 filesystem. |
| CVE-2011-2492 | The bluetooth subsystem in the Linux kernel before 3.0-rc4 does not properly initialize certain data structures, which allows local users to obtain potentially sensitive information from kernel memory via a crafted getsockopt system call, related to (1) the l2cap_sock_getsockopt_old function in net/bluetooth/l2cap_sock.c and (2) the rfcomm_sock_getsockopt_old function in net/bluetooth/rfcomm/sock.c. |
| CVE-2011-2491 | The Network Lock Manager (NLM) protocol implementation in the NFS client functionality in the Linux kernel before 3.0 allows local users to cause a denial of service (system hang) via a LOCK_UN flock system call. |
| CVE-2011-2484 | The add_del_listener function in kernel/taskstats.c in the Linux kernel 2.6.39.1 and earlier does not prevent multiple registrations of exit handlers, which allows local users to cause a denial of service (memory and CPU consumption), and bypass the OOM Killer, via a crafted application. |
| CVE-2011-2482 | A certain Red Hat patch to the sctp_sock_migrate function in net/sctp/socket.c in the Linux kernel before 2.6.21, as used in Red Hat Enterprise Linux (RHEL) 5, allows remote attackers to cause a denial of service (NULL pointer dereference and OOPS) via a crafted SCTP packet. |
| CVE-2011-2479 | The Linux kernel before 2.6.39 does not properly create transparent huge pages in response to a MAP_PRIVATE mmap system call on /dev/zero, which allows local users to cause a denial of service (system crash) via a crafted application. |
| CVE-2011-2213 | The inet_diag_bc_audit function in net/ipv4/inet_diag.c in the Linux kernel before 2.6.39.3 does not properly audit INET_DIAG bytecode, which allows local users to cause a denial of service (kernel infinite loop) via crafted INET_DIAG_REQ_BYTECODE instructions in a netlink message, as demonstrated by an INET_DIAG_BC_JMP instruction with a zero yes value, a different vulnerability than CVE-2010-3880. |
| CVE-2011-2211 | The osf_wait4 function in arch/alpha/kernel/osf_sys.c in the Linux kernel before 2.6.39.4 on the Alpha platform uses an incorrect pointer, which allows local users to gain privileges by writing a certain integer value to kernel memory. |
| CVE-2011-2210 | The osf_getsysinfo function in arch/alpha/kernel/osf_sys.c in the Linux kernel before 2.6.39.4 on the Alpha platform does not properly restrict the data size for GSI_GET_HWRPB operations, which allows local users to obtain sensitive information from kernel memory via a crafted call. |
| CVE-2011-2209 | Integer signedness error in the osf_sysinfo function in arch/alpha/kernel/osf_sys.c in the Linux kernel before 2.6.39.4 on the Alpha platform allows local users to obtain sensitive information from kernel memory via a crafted call. |
| CVE-2011-2208 | Integer signedness error in the osf_getdomainname function in arch/alpha/kernel/osf_sys.c in the Linux kernel before 2.6.39.4 on the Alpha platform allows local users to obtain sensitive information from kernel memory via a crafted call. |
| CVE-2011-2203 | The hfs_find_init function in the Linux kernel 2.6 allows local users to cause a denial of service (NULL pointer dereference and Oops) by mounting an HFS file system with a malformed MDB extent record. |
| CVE-2011-2189 | net/core/net_namespace.c in the Linux kernel 2.6.32 and earlier does not properly handle a high rate of creation and cleanup of network namespaces, which makes it easier for remote attackers to cause a denial of service (memory consumption) via requests to a daemon that requires a separate namespace per connection, as demonstrated by vsftpd. |
| CVE-2011-2184 | The key_replace_session_keyring function in security/keys/process_keys.c in the Linux kernel before 2.6.39.1 does not initialize a certain structure member, which allows local users to cause a denial of service (NULL pointer dereference and OOPS) or possibly have unspecified other impact via a KEYCTL_SESSION_TO_PARENT argument to the keyctl function, a different vulnerability than CVE-2010-2960. |
| CVE-2011-2183 | Race condition in the scan_get_next_rmap_item function in mm/ksm.c in the Linux kernel before 2.6.39.3, when Kernel SamePage Merging (KSM) is enabled, allows local users to cause a denial of service (NULL pointer dereference) or possibly have unspecified other impact via a crafted application. |
| CVE-2011-2182 | The ldm_frag_add function in fs/partitions/ldm.c in the Linux kernel before 2.6.39.1 does not properly handle memory allocation for non-initial fragments, which might allow local users to conduct buffer overflow attacks, and gain privileges or obtain sensitive information, via a crafted LDM partition table. NOTE: this vulnerability exists because of an incomplete fix for CVE-2011-1017. |
| CVE-2011-2022 | The agp_generic_remove_memory function in drivers/char/agp/generic.c in the Linux kernel before 2.6.38.5 does not validate a certain start parameter, which allows local users to gain privileges or cause a denial of service (system crash) via a crafted AGPIOC_UNBIND agp_ioctl ioctl call, a different vulnerability than CVE-2011-1745. |
| CVE-2011-1927 | The ip_expire function in net/ipv4/ip_fragment.c in the Linux kernel before 2.6.39 does not properly construct ICMP_TIME_EXCEEDED packets after a timeout, which allows remote attackers to cause a denial of service (invalid pointer dereference) via crafted fragmented packets. |
| CVE-2011-1833 | Race condition in the ecryptfs_mount function in fs/ecryptfs/main.c in the eCryptfs subsystem in the Linux kernel before 3.1 allows local users to bypass intended file permissions via a mount.ecryptfs_private mount with a mismatched uid. |
| CVE-2011-1776 | The is_gpt_valid function in fs/partitions/efi.c in the Linux kernel before 2.6.39 does not check the size of an Extensible Firmware Interface (EFI) GUID Partition Table (GPT) entry, which allows physically proximate attackers to cause a denial of service (heap-based buffer overflow and OOPS) or obtain sensitive information from kernel heap memory by connecting a crafted GPT storage device, a different vulnerability than CVE-2011-1577. |
| CVE-2011-1771 | The cifs_close function in fs/cifs/file.c in the Linux kernel before 2.6.39 allows local users to cause a denial of service (NULL pointer dereference and BUG) or possibly have unspecified other impact by setting the O_DIRECT flag during an attempt to open a file on a CIFS filesystem. |
| CVE-2011-1770 | Integer underflow in the dccp_parse_options function (net/dccp/options.c) in the Linux kernel before 2.6.33.14 allows remote attackers to cause a denial of service via a Datagram Congestion Control Protocol (DCCP) packet with an invalid feature options length, which triggers a buffer over-read. |
| CVE-2011-1768 | The tunnels implementation in the Linux kernel before 2.6.34, when tunnel functionality is configured as a module, allows remote attackers to cause a denial of service (OOPS) by sending a packet during module loading. |
| CVE-2011-1767 | net/ipv4/ip_gre.c in the Linux kernel before 2.6.34, when ip_gre is configured as a module, allows remote attackers to cause a denial of service (OOPS) by sending a packet during module loading. |
| CVE-2011-1759 | Integer overflow in the sys_oabi_semtimedop function in arch/arm/kernel/sys_oabi-compat.c in the Linux kernel before 2.6.39 on the ARM platform, when CONFIG_OABI_COMPAT is enabled, allows local users to gain privileges or cause a denial of service (heap memory corruption) by providing a crafted argument and leveraging a race condition. |
| CVE-2011-1748 | The raw_release function in net/can/raw.c in the Linux kernel before 2.6.39-rc6 does not properly validate a socket data structure, which allows local users to cause a denial of service (NULL pointer dereference) or possibly have unspecified other impact via a crafted release operation. |
| CVE-2011-1747 | The agp subsystem in the Linux kernel 2.6.38.5 and earlier does not properly restrict memory allocation by the (1) AGPIOC_RESERVE and (2) AGPIOC_ALLOCATE ioctls, which allows local users to cause a denial of service (memory consumption) by making many calls to these ioctls. |
| CVE-2011-1746 | Multiple integer overflows in the (1) agp_allocate_memory and (2) agp_create_user_memory functions in drivers/char/agp/generic.c in the Linux kernel before 2.6.38.5 allow local users to trigger buffer overflows, and consequently cause a denial of service (system crash) or possibly have unspecified other impact, via vectors related to calls that specify a large number of memory pages. |
| CVE-2011-1745 | Integer overflow in the agp_generic_insert_memory function in drivers/char/agp/generic.c in the Linux kernel before 2.6.38.5 allows local users to gain privileges or cause a denial of service (system crash) via a crafted AGPIOC_BIND agp_ioctl ioctl call. |
| CVE-2011-1598 | The bcm_release function in net/can/bcm.c in the Linux kernel before 2.6.39-rc6 does not properly validate a socket data structure, which allows local users to cause a denial of service (NULL pointer dereference) or possibly have unspecified other impact via a crafted release operation. |
| CVE-2011-1593 | Multiple integer overflows in the next_pidmap function in kernel/pid.c in the Linux kernel before 2.6.38.4 allow local users to cause a denial of service (system crash) via a crafted (1) getdents or (2) readdir system call. |
| CVE-2011-1585 | The cifs_find_smb_ses function in fs/cifs/connect.c in the Linux kernel before 2.6.36 does not properly determine the associations between users and sessions, which allows local users to bypass CIFS share authentication by leveraging a mount of a share by a different user. |
| CVE-2011-1581 | The bond_select_queue function in drivers/net/bonding/bond_main.c in the Linux kernel before 2.6.39, when a network device with a large number of receive queues is installed but the default tx_queues setting is used, does not properly restrict queue indexes, which allows remote attackers to cause a denial of service (BUG and system crash) or possibly have unspecified other impact by sending network traffic. |
| CVE-2011-1577 | Heap-based buffer overflow in the is_gpt_valid function in fs/partitions/efi.c in the Linux kernel 2.6.38 and earlier allows physically proximate attackers to cause a denial of service (OOPS) or possibly have unspecified other impact via a crafted size of the EFI GUID partition-table header on removable media. |
| CVE-2011-1576 | The Generic Receive Offload (GRO) implementation in the Linux kernel 2.6.18 on Red Hat Enterprise Linux 5 and 2.6.32 on Red Hat Enterprise Linux 6, as used in Red Hat Enterprise Virtualization (RHEV) Hypervisor and other products, allows remote attackers to cause a denial of service via crafted VLAN packets that are processed by the napi_reuse_skb function, leading to (1) a memory leak or (2) memory corruption, a different vulnerability than CVE-2011-1478. |
| CVE-2011-1573 | net/sctp/sm_make_chunk.c in the Linux kernel before 2.6.34, when addip_enable and auth_enable are used, does not consider the amount of zero padding during calculation of chunk lengths for (1) INIT and (2) INIT ACK chunks, which allows remote attackers to cause a denial of service (OOPS) via crafted packet data. |
| CVE-2011-1495 | drivers/scsi/mpt2sas/mpt2sas_ctl.c in the Linux kernel 2.6.38 and earlier does not validate (1) length and (2) offset values before performing memory copy operations, which might allow local users to gain privileges, cause a denial of service (memory corruption), or obtain sensitive information from kernel memory via a crafted ioctl call, related to the _ctl_do_mpt_command and _ctl_diag_read_buffer functions. |
| CVE-2011-1494 | Integer overflow in the _ctl_do_mpt_command function in drivers/scsi/mpt2sas/mpt2sas_ctl.c in the Linux kernel 2.6.38 and earlier might allow local users to gain privileges or cause a denial of service (memory corruption) via an ioctl call specifying a crafted value that triggers a heap-based buffer overflow. |
| CVE-2011-1493 | Array index error in the rose_parse_national function in net/rose/rose_subr.c in the Linux kernel before 2.6.39 allows remote attackers to cause a denial of service (heap memory corruption) or possibly have unspecified other impact by composing FAC_NATIONAL_DIGIS data that specifies a large number of digipeaters, and then sending this data to a ROSE socket. |
| CVE-2011-1479 | Double free vulnerability in the inotify subsystem in the Linux kernel before 2.6.39 allows local users to cause a denial of service (system crash) via vectors involving failed attempts to create files. NOTE: this vulnerability exists because of an incorrect fix for CVE-2010-4250. |
| CVE-2011-1478 | The napi_reuse_skb function in net/core/dev.c in the Generic Receive Offload (GRO) implementation in the Linux kernel before 2.6.38 does not reset the values of certain structure members, which might allow remote attackers to cause a denial of service (NULL pointer dereference) via a malformed VLAN frame. |
| CVE-2011-1477 | Multiple array index errors in sound/oss/opl3.c in the Linux kernel before 2.6.39 allow local users to cause a denial of service (heap memory corruption) or possibly gain privileges by leveraging write access to /dev/sequencer. |
| CVE-2011-1476 | Integer underflow in the Open Sound System (OSS) subsystem in the Linux kernel before 2.6.39 on unspecified non-x86 platforms allows local users to cause a denial of service (memory corruption) by leveraging write access to /dev/sequencer. |
| CVE-2011-1182 | kernel/signal.c in the Linux kernel before 2.6.39 allows local users to spoof the uid and pid of a signal sender via a sigqueueinfo system call. |
| CVE-2011-1180 | Multiple stack-based buffer overflows in the iriap_getvaluebyclass_indication function in net/irda/iriap.c in the Linux kernel before 2.6.39 allow remote attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact by leveraging connectivity to an IrDA infrared network and sending a large integer value for a (1) name length or (2) attribute length. |
| CVE-2011-1173 | The econet_sendmsg function in net/econet/af_econet.c in the Linux kernel before 2.6.39 on the x86_64 platform allows remote attackers to obtain potentially sensitive information from kernel stack memory by reading uninitialized data in the ah field of an Acorn Universal Networking (AUN) packet. |
| CVE-2011-1172 | net/ipv6/netfilter/ip6_tables.c in the IPv6 implementation in the Linux kernel before 2.6.39 does not place the expected '\0' character at the end of string data in the values of certain structure members, which allows local users to obtain potentially sensitive information from kernel memory by leveraging the CAP_NET_ADMIN capability to issue a crafted request, and then reading the argument to the resulting modprobe process. |
| CVE-2011-1171 | net/ipv4/netfilter/ip_tables.c in the IPv4 implementation in the Linux kernel before 2.6.39 does not place the expected '\0' character at the end of string data in the values of certain structure members, which allows local users to obtain potentially sensitive information from kernel memory by leveraging the CAP_NET_ADMIN capability to issue a crafted request, and then reading the argument to the resulting modprobe process. |
| CVE-2011-1170 | net/ipv4/netfilter/arp_tables.c in the IPv4 implementation in the Linux kernel before 2.6.39 does not place the expected '\0' character at the end of string data in the values of certain structure members, which allows local users to obtain potentially sensitive information from kernel memory by leveraging the CAP_NET_ADMIN capability to issue a crafted request, and then reading the argument to the resulting modprobe process. |
| CVE-2011-1169 | Array index error in the asihpi_hpi_ioctl function in sound/pci/asihpi/hpioctl.c in the AudioScience HPI driver in the Linux kernel before 2.6.38.1 might allow local users to cause a denial of service (memory corruption) or possibly gain privileges via a crafted adapter index value that triggers access to an invalid kernel pointer. |
| CVE-2011-1163 | The osf_partition function in fs/partitions/osf.c in the Linux kernel before 2.6.38 does not properly handle an invalid number of partitions, which might allow local users to obtain potentially sensitive information from kernel heap memory via vectors related to partition-table parsing. |
| CVE-2011-1162 | The tpm_read function in the Linux kernel 2.6 does not properly clear memory, which might allow local users to read the results of the previous TPM command. |
| CVE-2011-1160 | The tpm_open function in drivers/char/tpm/tpm.c in the Linux kernel before 2.6.39 does not initialize a certain buffer, which allows local users to obtain potentially sensitive information from kernel memory via unspecified vectors. |
| CVE-2011-1093 | The dccp_rcv_state_process function in net/dccp/input.c in the Datagram Congestion Control Protocol (DCCP) implementation in the Linux kernel before 2.6.38 does not properly handle packets for a CLOSED endpoint, which allows remote attackers to cause a denial of service (NULL pointer dereference and OOPS) by sending a DCCP-Close packet followed by a DCCP-Reset packet. |
| CVE-2011-1090 | The __nfs4_proc_set_acl function in fs/nfs/nfs4proc.c in the Linux kernel before 2.6.38 stores NFSv4 ACL data in memory that is allocated by kmalloc but not properly freed, which allows local users to cause a denial of service (panic) via a crafted attempt to set an ACL. |
| CVE-2011-1083 | The epoll implementation in the Linux kernel 2.6.37.2 and earlier does not properly traverse a tree of epoll file descriptors, which allows local users to cause a denial of service (CPU consumption) via a crafted application that makes epoll_create and epoll_ctl system calls. |
| CVE-2011-1082 | fs/eventpoll.c in the Linux kernel before 2.6.38 places epoll file descriptors within other epoll data structures without properly checking for (1) closed loops or (2) deep chains, which allows local users to cause a denial of service (deadlock or stack memory consumption) via a crafted application that makes epoll_create and epoll_ctl system calls. |
| CVE-2011-1080 | The do_replace function in net/bridge/netfilter/ebtables.c in the Linux kernel before 2.6.39 does not ensure that a certain name field ends with a '\0' character, which allows local users to obtain potentially sensitive information from kernel stack memory by leveraging the CAP_NET_ADMIN capability to replace a table, and then reading a modprobe command line. |
| CVE-2011-1079 | The bnep_sock_ioctl function in net/bluetooth/bnep/sock.c in the Linux kernel before 2.6.39 does not ensure that a certain device field ends with a '\0' character, which allows local users to obtain potentially sensitive information from kernel stack memory, or cause a denial of service (BUG and system crash), via a BNEPCONNADD command. |
| CVE-2011-1078 | The sco_sock_getsockopt_old function in net/bluetooth/sco.c in the Linux kernel before 2.6.39 does not initialize a certain structure, which allows local users to obtain potentially sensitive information from kernel stack memory via the SCO_CONNINFO option. |
| CVE-2011-1076 | net/dns_resolver/dns_key.c in the Linux kernel before 2.6.38 allows remote DNS servers to cause a denial of service (NULL pointer dereference and OOPS) by not providing a valid response to a DNS query, as demonstrated by an erroneous grand.centrall.org query, which triggers improper handling of error data within a DNS resolver key. |
| CVE-2011-1044 | The ib_uverbs_poll_cq function in drivers/infiniband/core/uverbs_cmd.c in the Linux kernel before 2.6.37 does not initialize a certain response buffer, which allows local users to obtain potentially sensitive information from kernel memory via vectors that cause this buffer to be only partially filled, a different vulnerability than CVE-2010-4649. |
| CVE-2011-1023 | The Reliable Datagram Sockets (RDS) subsystem in the Linux kernel before 2.6.38 does not properly handle congestion map updates, which allows local users to cause a denial of service (BUG_ON and system crash) via vectors involving (1) a loopback (aka loop) transmit operation or (2) an InfiniBand (aka ib) transmit operation. |
| CVE-2011-1021 | drivers/acpi/debugfs.c in the Linux kernel before 3.0 allows local users to modify arbitrary kernel memory locations by leveraging root privileges to write to the /sys/kernel/debug/acpi/custom_method file. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-4347. |
| CVE-2011-1020 | The proc filesystem implementation in the Linux kernel 2.6.37 and earlier does not restrict access to the /proc directory tree of a process after this process performs an exec of a setuid program, which allows local users to obtain sensitive information or cause a denial of service via open, lseek, read, and write system calls. |
| CVE-2011-1019 | The dev_load function in net/core/dev.c in the Linux kernel before 2.6.38 allows local users to bypass an intended CAP_SYS_MODULE capability requirement and load arbitrary modules by leveraging the CAP_NET_ADMIN capability. |
| CVE-2011-1017 | Heap-based buffer overflow in the ldm_frag_add function in fs/partitions/ldm.c in the Linux kernel 2.6.37.2 and earlier might allow local users to gain privileges or obtain sensitive information via a crafted LDM partition table. |
| CVE-2011-1016 | The Radeon GPU drivers in the Linux kernel before 2.6.38-rc5 do not properly validate data related to the AA resolve registers, which allows local users to write to arbitrary memory locations associated with (1) Video RAM (aka VRAM) or (2) the Graphics Translation Table (GTT) via crafted values. |
| CVE-2011-1013 | Integer signedness error in the drm_modeset_ctl function in (1) drivers/gpu/drm/drm_irq.c in the Direct Rendering Manager (DRM) subsystem in the Linux kernel before 2.6.38 and (2) sys/dev/pci/drm/drm_irq.c in the kernel in OpenBSD before 4.9 allows local users to trigger out-of-bounds write operations, and consequently cause a denial of service (system crash) or possibly have unspecified other impact, via a crafted num_crtcs (aka vb_num) structure member in an ioctl argument. |
| CVE-2011-1012 | The ldm_parse_vmdb function in fs/partitions/ldm.c in the Linux kernel before 2.6.38-rc6-git6 does not validate the VBLK size value in the VMDB structure in an LDM partition table, which allows local users to cause a denial of service (divide-by-zero error and OOPS) via a crafted partition table. |
| CVE-2011-1010 | Buffer overflow in the mac_partition function in fs/partitions/mac.c in the Linux kernel before 2.6.37.2 allows local users to cause a denial of service (panic) or possibly have unspecified other impact via a malformed Mac OS partition table. |
| CVE-2011-0999 | mm/huge_memory.c in the Linux kernel before 2.6.38-rc5 does not prevent creation of a transparent huge page (THP) during the existence of a temporary stack for an exec system call, which allows local users to cause a denial of service (memory consumption) or possibly have unspecified other impact via a crafted application. |
| CVE-2011-0726 | The do_task_stat function in fs/proc/array.c in the Linux kernel before 2.6.39-rc1 does not perform an expected uid check, which makes it easier for local users to defeat the ASLR protection mechanism by reading the start_code and end_code fields in the /proc/#####/stat file for a process executing a PIE binary. |
| CVE-2011-0716 | The br_multicast_add_group function in net/bridge/br_multicast.c in the Linux kernel before 2.6.38, when a certain Ethernet bridge configuration is used, allows local users to cause a denial of service (memory corruption and system crash) by sending IGMP packets to a local interface. |
| CVE-2011-0714 | Use-after-free vulnerability in a certain Red Hat patch for the RPC server sockets functionality in the Linux kernel 2.6.32 on Red Hat Enterprise Linux (RHEL) 6 might allow remote attackers to cause a denial of service (crash) via malformed data in a packet, related to lockd and the svc_xprt_received function. |
| CVE-2011-0712 | Multiple buffer overflows in the caiaq Native Instruments USB audio functionality in the Linux kernel before 2.6.38-rc4-next-20110215 might allow attackers to cause a denial of service or possibly have unspecified other impact via a long USB device name, related to (1) the snd_usb_caiaq_audio_init function in sound/usb/caiaq/audio.c and (2) the snd_usb_caiaq_midi_init function in sound/usb/caiaq/midi.c. |
| CVE-2011-0711 | The xfs_fs_geometry function in fs/xfs/xfs_fsops.c in the Linux kernel before 2.6.38-rc6-git3 does not initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an FSGEOMETRY_V1 ioctl call. |
| CVE-2011-0710 | The task_show_regs function in arch/s390/kernel/traps.c in the Linux kernel before 2.6.38-rc4-next-20110216 on the s390 platform allows local users to obtain the values of the registers of an arbitrary process by reading a status file under /proc/. |
| CVE-2011-0709 | The br_mdb_ip_get function in net/bridge/br_multicast.c in the Linux kernel before 2.6.35-rc5 allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) via an IGMP packet, related to lack of a multicast table. |
| CVE-2011-0699 | Integer signedness error in the btrfs_ioctl_space_info function in the Linux kernel 2.6.37 allows local users to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact via a crafted slot value. |
| CVE-2011-0695 | Race condition in the cm_work_handler function in the InfiniBand driver (drivers/infiniband/core/cma.c) in Linux kernel 2.6.x allows remote attackers to cause a denial of service (panic) by sending an InfiniBand request while other request handlers are still running, which triggers an invalid pointer dereference. |
| CVE-2011-0521 | The dvb_ca_ioctl function in drivers/media/dvb/ttpci/av7110_ca.c in the Linux kernel before 2.6.38-rc2 does not check the sign of a certain integer field, which allows local users to cause a denial of service (memory corruption) or possibly have unspecified other impact via a negative value. |
| CVE-2011-0463 | The ocfs2_prepare_page_for_write function in fs/ocfs2/aops.c in the Oracle Cluster File System 2 (OCFS2) subsystem in the Linux kernel before 2.6.39-rc1 does not properly handle holes that cross page boundaries, which allows local users to obtain potentially sensitive information from uninitialized disk locations by reading a file. |
| CVE-2011-0431 | The afs_linux_lock function in afs/LINUX/osi_vnodeops.c in the kernel module in OpenAFS 1.4.14, 1.4.12, 1.4.7, and possibly other versions does not properly handle errors, which allows attackers to cause a denial of service via unknown vectors. NOTE: some of these details are obtained from third party information. |
| CVE-2011-0006 | The ima_lsm_rule_init function in security/integrity/ima/ima_policy.c in the Linux kernel before 2.6.37, when the Linux Security Modules (LSM) framework is disabled, allows local users to bypass Integrity Measurement Architecture (IMA) rules in opportunistic circumstances by leveraging an administrator's addition of an IMA rule for LSM. |
| CVE-2010-5332 | In the Linux kernel before 2.6.37, an out of bounds array access happened in drivers/net/mlx4/port.c. When searching for a free entry in either mlx4_register_vlan() or mlx4_register_mac(), and there is no free entry, the loop terminates without updating the local variable free thus causing out of array bounds access. |
| CVE-2010-5331 | ** DISPUTED ** In the Linux kernel before 2.6.34, a range check issue in drivers/gpu/drm/radeon/atombios.c could cause an off by one (buffer overflow) problem. NOTE: At least one Linux maintainer believes that this CVE is incorrectly assigned and should be rejected because the value is hard coded and are not user-controllable where it is used. |
| CVE-2010-5329 | The video_usercopy function in drivers/media/video/v4l2-ioctl.c in the Linux kernel before 2.6.39 relies on the count value of a v4l2_ext_controls data structure to determine a kmalloc size, which might allow local users to cause a denial of service (memory consumption) via a large value. |
| CVE-2010-5328 | include/linux/init_task.h in the Linux kernel before 2.6.35 does not prevent signals with a process group ID of zero from reaching the swapper process, which allows local users to cause a denial of service (system crash) by leveraging access to this process group. |
| CVE-2010-5321 | Memory leak in drivers/media/video/videobuf-core.c in the videobuf subsystem in the Linux kernel 2.6.x through 4.x allows local users to cause a denial of service (memory consumption) by leveraging /dev/video access for a series of mmap calls that require new allocations, a different vulnerability than CVE-2007-6761. NOTE: as of 2016-06-18, this affects only 11 drivers that have not been updated to use videobuf2 instead of videobuf. |
| CVE-2010-5313 | Race condition in arch/x86/kvm/x86.c in the Linux kernel before 2.6.38 allows L2 guest OS users to cause a denial of service (L1 guest OS crash) via a crafted instruction that triggers an L2 emulation failure report, a similar issue to CVE-2014-7842. |
| CVE-2010-4805 | The socket implementation in net/core/sock.c in the Linux kernel before 2.6.35 does not properly manage a backlog of received packets, which allows remote attackers to cause a denial of service by sending a large amount of network traffic, related to the sk_add_backlog function and the sk_rmem_alloc socket field. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-4251. |
| CVE-2010-4668 | The blk_rq_map_user_iov function in block/blk-map.c in the Linux kernel before 2.6.37-rc7 allows local users to cause a denial of service (panic) via a zero-length I/O request in a device ioctl to a SCSI device, related to an unaligned map. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-4163. |
| CVE-2010-4661 | udisks before 1.0.3 allows a local user to load arbitrary Linux kernel modules. |
| CVE-2010-4656 | The iowarrior_write function in drivers/usb/misc/iowarrior.c in the Linux kernel before 2.6.37 does not properly allocate memory, which might allow local users to trigger a heap-based buffer overflow, and consequently cause a denial of service or gain privileges, via a long report. |
| CVE-2010-4655 | net/core/ethtool.c in the Linux kernel before 2.6.36 does not initialize certain data structures, which allows local users to obtain potentially sensitive information from kernel heap memory by leveraging the CAP_NET_ADMIN capability for an ethtool ioctl call. |
| CVE-2010-4650 | Buffer overflow in the fuse_do_ioctl function in fs/fuse/file.c in the Linux kernel before 2.6.37 allows local users to cause a denial of service or possibly have unspecified other impact by leveraging the ability to operate a CUSE server. |
| CVE-2010-4649 | Integer overflow in the ib_uverbs_poll_cq function in drivers/infiniband/core/uverbs_cmd.c in the Linux kernel before 2.6.37 allows local users to cause a denial of service (memory corruption) or possibly have unspecified other impact via a large value of a certain structure member. |
| CVE-2010-4648 | The orinoco_ioctl_set_auth function in drivers/net/wireless/orinoco/wext.c in the Linux kernel before 2.6.37 does not properly implement a TKIP protection mechanism, which makes it easier for remote attackers to obtain access to a Wi-Fi network by reading Wi-Fi frames. |
| CVE-2010-4565 | The bcm_connect function in net/can/bcm.c (aka the Broadcast Manager) in the Controller Area Network (CAN) implementation in the Linux kernel 2.6.36 and earlier creates a publicly accessible file with a filename containing a kernel memory address, which allows local users to obtain potentially sensitive information about kernel memory use by listing this filename. |
| CVE-2010-4563 | The Linux kernel, when using IPv6, allows remote attackers to determine whether a host is sniffing the network by sending an ICMPv6 Echo Request to a multicast address and determining whether an Echo Reply is sent, as demonstrated by thcping. |
| CVE-2010-4529 | Integer underflow in the irda_getsockopt function in net/irda/af_irda.c in the Linux kernel before 2.6.37 on platforms other than x86 allows local users to obtain potentially sensitive information from kernel heap memory via an IRLMP_ENUMDEVICES getsockopt call. |
| CVE-2010-4527 | The load_mixer_volumes function in sound/oss/soundcard.c in the OSS sound subsystem in the Linux kernel before 2.6.37 incorrectly expects that a certain name field ends with a '\0' character, which allows local users to conduct buffer overflow attacks and gain privileges, or possibly obtain sensitive information from kernel memory, via a SOUND_MIXER_SETLEVELS ioctl call. |
| CVE-2010-4526 | Race condition in the sctp_icmp_proto_unreachable function in net/sctp/input.c in Linux kernel 2.6.11-rc2 through 2.6.33 allows remote attackers to cause a denial of service (panic) via an ICMP unreachable message to a socket that is already locked by a user, which causes the socket to be freed and triggers list corruption, related to the sctp_wait_for_connect function. |
| CVE-2010-4525 | Linux kernel 2.6.33 and 2.6.34.y does not initialize the kvm_vcpu_events->interrupt.pad structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via unspecified vectors. |
| CVE-2010-4347 | The ACPI subsystem in the Linux kernel before 2.6.36.2 uses 0222 permissions for the debugfs custom_method file, which allows local users to gain privileges by placing a custom ACPI method in the ACPI interpreter tables, related to the acpi_debugfs_init function in drivers/acpi/debugfs.c. |
| CVE-2010-4346 | The install_special_mapping function in mm/mmap.c in the Linux kernel before 2.6.37-rc6 does not make an expected security_file_mmap function call, which allows local users to bypass intended mmap_min_addr restrictions and possibly conduct NULL pointer dereference attacks via a crafted assembly-language application. |
| CVE-2010-4343 | drivers/scsi/bfa/bfa_core.c in the Linux kernel before 2.6.35 does not initialize a certain port data structure, which allows local users to cause a denial of service (system crash) via read operations on an fc_host statistics file. |
| CVE-2010-4342 | The aun_incoming function in net/econet/af_econet.c in the Linux kernel before 2.6.37-rc6, when Econet is enabled, allows remote attackers to cause a denial of service (NULL pointer dereference and OOPS) by sending an Acorn Universal Networking (AUN) packet over UDP. |
| CVE-2010-4263 | The igb_receive_skb function in drivers/net/igb/igb_main.c in the Intel Gigabit Ethernet (aka igb) subsystem in the Linux kernel before 2.6.34, when Single Root I/O Virtualization (SR-IOV) and promiscuous mode are enabled but no VLANs are registered, allows remote attackers to cause a denial of service (NULL pointer dereference and panic) and possibly have unspecified other impact via a VLAN tagged frame. |
| CVE-2010-4258 | The do_exit function in kernel/exit.c in the Linux kernel before 2.6.36.2 does not properly handle a KERNEL_DS get_fs value, which allows local users to bypass intended access_ok restrictions, overwrite arbitrary kernel memory locations, and gain privileges by leveraging a (1) BUG, (2) NULL pointer dereference, or (3) page fault, as demonstrated by vectors involving the clear_child_tid feature and the splice system call. |
| CVE-2010-4256 | The pipe_fcntl function in fs/pipe.c in the Linux kernel before 2.6.37 does not properly determine whether a file is a named pipe, which allows local users to cause a denial of service via an F_SETPIPE_SZ fcntl call. |
| CVE-2010-4251 | The socket implementation in net/core/sock.c in the Linux kernel before 2.6.34 does not properly manage a backlog of received packets, which allows remote attackers to cause a denial of service (memory consumption) by sending a large amount of network traffic, as demonstrated by netperf UDP tests. |
| CVE-2010-4250 | Memory leak in the inotify_init1 function in fs/notify/inotify/inotify_user.c in the Linux kernel before 2.6.37 allows local users to cause a denial of service (memory consumption) via vectors involving failed attempts to create files. |
| CVE-2010-4249 | The wait_for_unix_gc function in net/unix/garbage.c in the Linux kernel before 2.6.37-rc3-next-20101125 does not properly select times for garbage collection of inflight sockets, which allows local users to cause a denial of service (system hang) via crafted use of the socketpair and sendmsg system calls for SOCK_SEQPACKET sockets. |
| CVE-2010-4248 | Race condition in the __exit_signal function in kernel/exit.c in the Linux kernel before 2.6.37-rc2 allows local users to cause a denial of service via vectors related to multithreaded exec, the use of a thread group leader in kernel/posix-cpu-timers.c, and the selection of a new thread group leader in the de_thread function in fs/exec.c. |
| CVE-2010-4247 | The do_block_io_op function in (1) drivers/xen/blkback/blkback.c and (2) drivers/xen/blktap/blktap.c in Xen before 3.4.0 for the Linux kernel 2.6.18, and possibly other versions, allows guest OS users to cause a denial of service (infinite loop and CPU consumption) via a large production request index to the blkback or blktap back-end drivers. NOTE: some of these details are obtained from third party information. |
| CVE-2010-4243 | fs/exec.c in the Linux kernel before 2.6.37 does not enable the OOM Killer to assess use of stack memory by arrays representing the (1) arguments and (2) environment, which allows local users to cause a denial of service (memory consumption) via a crafted exec system call, aka an "OOM dodging issue," a related issue to CVE-2010-3858. |
| CVE-2010-4242 | The hci_uart_tty_open function in the HCI UART driver (drivers/bluetooth/hci_ldisc.c) in the Linux kernel 2.6.36, and possibly other versions, does not verify whether the tty has a write operation, which allows local users to cause a denial of service (NULL pointer dereference) via vectors related to the Bluetooth driver. |
| CVE-2010-4238 | The vbd_create function in Xen 3.1.2, when the Linux kernel 2.6.18 on Red Hat Enterprise Linux (RHEL) 5 is used, allows guest OS users to cause a denial of service (host OS panic) via an attempted access to a virtual CD-ROM device through the blkback driver. NOTE: some of these details are obtained from third party information. |
| CVE-2010-4175 | Integer overflow in the rds_cmsg_rdma_args function (net/rds/rdma.c) in Linux kernel 2.6.35 allows local users to cause a denial of service (crash) and possibly trigger memory corruption via a crafted Reliable Datagram Sockets (RDS) request, a different vulnerability than CVE-2010-3865. |
| CVE-2010-4169 | Use-after-free vulnerability in mm/mprotect.c in the Linux kernel before 2.6.37-rc2 allows local users to cause a denial of service via vectors involving an mprotect system call. |
| CVE-2010-4165 | The do_tcp_setsockopt function in net/ipv4/tcp.c in the Linux kernel before 2.6.37-rc2 does not properly restrict TCP_MAXSEG (aka MSS) values, which allows local users to cause a denial of service (OOPS) via a setsockopt call that specifies a small value, leading to a divide-by-zero error or incorrect use of a signed integer. |
| CVE-2010-4164 | Multiple integer underflows in the x25_parse_facilities function in net/x25/x25_facilities.c in the Linux kernel before 2.6.36.2 allow remote attackers to cause a denial of service (system crash) via malformed X.25 (1) X25_FAC_CLASS_A, (2) X25_FAC_CLASS_B, (3) X25_FAC_CLASS_C, or (4) X25_FAC_CLASS_D facility data, a different vulnerability than CVE-2010-3873. |
| CVE-2010-4163 | The blk_rq_map_user_iov function in block/blk-map.c in the Linux kernel before 2.6.36.2 allows local users to cause a denial of service (panic) via a zero-length I/O request in a device ioctl to a SCSI device. |
| CVE-2010-4162 | Multiple integer overflows in fs/bio.c in the Linux kernel before 2.6.36.2 allow local users to cause a denial of service (system crash) via a crafted device ioctl to a SCSI device. |
| CVE-2010-4161 | The udp_queue_rcv_skb function in net/ipv4/udp.c in a certain Red Hat build of the Linux kernel 2.6.18 in Red Hat Enterprise Linux (RHEL) 5 allows attackers to cause a denial of service (deadlock and system hang) by sending UDP traffic to a socket that has a crafted socket filter, a related issue to CVE-2010-4158. |
| CVE-2010-4160 | Multiple integer overflows in the (1) pppol2tp_sendmsg function in net/l2tp/l2tp_ppp.c, and the (2) l2tp_ip_sendmsg function in net/l2tp/l2tp_ip.c, in the PPPoL2TP and IPoL2TP implementations in the Linux kernel before 2.6.36.2 allow local users to cause a denial of service (heap memory corruption and panic) or possibly gain privileges via a crafted sendto call. |
| CVE-2010-4158 | The sk_run_filter function in net/core/filter.c in the Linux kernel before 2.6.36.2 does not check whether a certain memory location has been initialized before executing a (1) BPF_S_LD_MEM or (2) BPF_S_LDX_MEM instruction, which allows local users to obtain potentially sensitive information from kernel stack memory via a crafted socket filter. |
| CVE-2010-4157 | Integer overflow in the ioc_general function in drivers/scsi/gdth.c in the Linux kernel before 2.6.36.1 on 64-bit platforms allows local users to cause a denial of service (memory corruption) or possibly have unspecified other impact via a large argument in an ioctl call. |
| CVE-2010-4083 | The copy_semid_to_user function in ipc/sem.c in the Linux kernel before 2.6.36 does not initialize a certain structure, which allows local users to obtain potentially sensitive information from kernel stack memory via a (1) IPC_INFO, (2) SEM_INFO, (3) IPC_STAT, or (4) SEM_STAT command in a semctl system call. |
| CVE-2010-4082 | The viafb_ioctl_get_viafb_info function in drivers/video/via/ioctl.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a VIAFB_GET_INFO ioctl call. |
| CVE-2010-4081 | The snd_hdspm_hwdep_ioctl function in sound/pci/rme9652/hdspm.c in the Linux kernel before 2.6.36-rc6 does not initialize a certain structure, which allows local users to obtain potentially sensitive information from kernel stack memory via an SNDRV_HDSPM_IOCTL_GET_CONFIG_INFO ioctl call. |
| CVE-2010-4080 | The snd_hdsp_hwdep_ioctl function in sound/pci/rme9652/hdsp.c in the Linux kernel before 2.6.36-rc6 does not initialize a certain structure, which allows local users to obtain potentially sensitive information from kernel stack memory via an SNDRV_HDSP_IOCTL_GET_CONFIG_INFO ioctl call. |
| CVE-2010-4079 | The ivtvfb_ioctl function in drivers/media/video/ivtv/ivtvfb.c in the Linux kernel before 2.6.36-rc8 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an FBIOGET_VBLANK ioctl call. |
| CVE-2010-4078 | The sisfb_ioctl function in drivers/video/sis/sis_main.c in the Linux kernel before 2.6.36-rc6 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an FBIOGET_VBLANK ioctl call. |
| CVE-2010-4077 | The ntty_ioctl_tiocgicount function in drivers/char/nozomi.c in the Linux kernel 2.6.36.1 and earlier does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a TIOCGICOUNT ioctl call. |
| CVE-2010-4076 | The rs_ioctl function in drivers/char/amiserial.c in the Linux kernel 2.6.36.1 and earlier does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a TIOCGICOUNT ioctl call. |
| CVE-2010-4075 | The uart_get_count function in drivers/serial/serial_core.c in the Linux kernel before 2.6.37-rc1 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a TIOCGICOUNT ioctl call. |
| CVE-2010-4074 | The USB subsystem in the Linux kernel before 2.6.36-rc5 does not properly initialize certain structure members, which allows local users to obtain potentially sensitive information from kernel stack memory via vectors related to TIOCGICOUNT ioctl calls, and the (1) mos7720_ioctl function in drivers/usb/serial/mos7720.c and (2) mos7840_ioctl function in drivers/usb/serial/mos7840.c. |
| CVE-2010-4073 | The ipc subsystem in the Linux kernel before 2.6.37-rc1 does not initialize certain structures, which allows local users to obtain potentially sensitive information from kernel stack memory via vectors related to the (1) compat_sys_semctl, (2) compat_sys_msgctl, and (3) compat_sys_shmctl functions in ipc/compat.c; and the (4) compat_sys_mq_open and (5) compat_sys_mq_getsetattr functions in ipc/compat_mq.c. |
| CVE-2010-4072 | The copy_shmid_to_user function in ipc/shm.c in the Linux kernel before 2.6.37-rc1 does not initialize a certain structure, which allows local users to obtain potentially sensitive information from kernel stack memory via vectors related to the shmctl system call and the "old shm interface." |
| CVE-2010-3904 | The rds_page_copy_user function in net/rds/page.c in the Reliable Datagram Sockets (RDS) protocol implementation in the Linux kernel before 2.6.36 does not properly validate addresses obtained from user space, which allows local users to gain privileges via crafted use of the sendmsg and recvmsg system calls. |
| CVE-2010-3881 | arch/x86/kvm/x86.c in the Linux kernel before 2.6.36.2 does not initialize certain structure members, which allows local users to obtain potentially sensitive information from kernel stack memory via read operations on the /dev/kvm device. |
| CVE-2010-3880 | net/ipv4/inet_diag.c in the Linux kernel before 2.6.37-rc2 does not properly audit INET_DIAG bytecode, which allows local users to cause a denial of service (kernel infinite loop) via crafted INET_DIAG_REQ_BYTECODE instructions in a netlink message that contains multiple attribute elements, as demonstrated by INET_DIAG_BC_JMP instructions. |
| CVE-2010-3877 | The get_name function in net/tipc/socket.c in the Linux kernel before 2.6.37-rc2 does not initialize a certain structure, which allows local users to obtain potentially sensitive information from kernel stack memory by reading a copy of this structure. |
| CVE-2010-3876 | net/packet/af_packet.c in the Linux kernel before 2.6.37-rc2 does not properly initialize certain structure members, which allows local users to obtain potentially sensitive information from kernel stack memory by leveraging the CAP_NET_RAW capability to read copies of the applicable structures. |
| CVE-2010-3875 | The ax25_getname function in net/ax25/af_ax25.c in the Linux kernel before 2.6.37-rc2 does not initialize a certain structure, which allows local users to obtain potentially sensitive information from kernel stack memory by reading a copy of this structure. |
| CVE-2010-3874 | Heap-based buffer overflow in the bcm_connect function in net/can/bcm.c (aka the Broadcast Manager) in the Controller Area Network (CAN) implementation in the Linux kernel before 2.6.36.2 on 64-bit platforms might allow local users to cause a denial of service (memory corruption) via a connect operation. |
| CVE-2010-3873 | The X.25 implementation in the Linux kernel before 2.6.36.2 does not properly parse facilities, which allows remote attackers to cause a denial of service (heap memory corruption and panic) or possibly have unspecified other impact via malformed (1) X25_FAC_CALLING_AE or (2) X25_FAC_CALLED_AE data, related to net/x25/x25_facilities.c and net/x25/x25_in.c, a different vulnerability than CVE-2010-4164. |
| CVE-2010-3865 | Integer overflow in the rds_rdma_pages function in net/rds/rdma.c in the Linux kernel allows local users to cause a denial of service (crash) and possibly execute arbitrary code via a crafted iovec struct in a Reliable Datagram Sockets (RDS) request, which triggers a buffer overflow. |
| CVE-2010-3861 | The ethtool_get_rxnfc function in net/core/ethtool.c in the Linux kernel before 2.6.36 does not initialize a certain block of heap memory, which allows local users to obtain potentially sensitive information via an ETHTOOL_GRXCLSRLALL ethtool command with a large info.rule_cnt value, a different vulnerability than CVE-2010-2478. |
| CVE-2010-3859 | Multiple integer signedness errors in the TIPC implementation in the Linux kernel before 2.6.36.2 allow local users to gain privileges via a crafted sendmsg call that triggers a heap-based buffer overflow, related to the tipc_msg_build function in net/tipc/msg.c and the verify_iovec function in net/core/iovec.c. |
| CVE-2010-3858 | The setup_arg_pages function in fs/exec.c in the Linux kernel before 2.6.36, when CONFIG_STACK_GROWSDOWN is used, does not properly restrict the stack memory consumption of the (1) arguments and (2) environment for a 32-bit application on a 64-bit platform, which allows local users to cause a denial of service (system crash) via a crafted exec system call, a related issue to CVE-2010-2240. |
| CVE-2010-3850 | The ec_dev_ioctl function in net/econet/af_econet.c in the Linux kernel before 2.6.36.2 does not require the CAP_NET_ADMIN capability, which allows local users to bypass intended access restrictions and configure econet addresses via an SIOCSIFADDR ioctl call. |
| CVE-2010-3849 | The econet_sendmsg function in net/econet/af_econet.c in the Linux kernel before 2.6.36.2, when an econet address is configured, allows local users to cause a denial of service (NULL pointer dereference and OOPS) via a sendmsg call that specifies a NULL value for the remote address field. |
| CVE-2010-3848 | Stack-based buffer overflow in the econet_sendmsg function in net/econet/af_econet.c in the Linux kernel before 2.6.36.2, when an econet address is configured, allows local users to gain privileges by providing a large number of iovec structures. |
| CVE-2010-3705 | The sctp_auth_asoc_get_hmac function in net/sctp/auth.c in the Linux kernel before 2.6.36 does not properly validate the hmac_ids array of an SCTP peer, which allows remote attackers to cause a denial of service (memory corruption and panic) via a crafted value in the last element of this array. |
| CVE-2010-3698 | The KVM implementation in the Linux kernel before 2.6.36 does not properly reload the FS and GS segment registers, which allows host OS users to cause a denial of service (host OS crash) via a KVM_RUN ioctl call in conjunction with a modified Local Descriptor Table (LDT). |
| CVE-2010-3659 | Multiple cross-site scripting (XSS) vulnerabilities in TYPO3 CMS 4.1.x before 4.1.14, 4.2.x before 4.2.13, 4.3.x before 4.3.4, and 4.4.x before 4.4.1 allow remote authenticated backend users to inject arbitrary web script or HTML via unspecified parameters to the extension manager, or unspecified parameters to unknown backend forms. |
| CVE-2010-3477 | The tcf_act_police_dump function in net/sched/act_police.c in the actions implementation in the network queueing functionality in the Linux kernel before 2.6.36-rc4 does not properly initialize certain structure members, which allows local users to obtain potentially sensitive information from kernel memory via vectors involving a dump operation. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-2942. |
| CVE-2010-3448 | drivers/platform/x86/thinkpad_acpi.c in the Linux kernel before 2.6.34 on ThinkPad devices, when the X.Org X server is used, does not properly restrict access to the video output control state, which allows local users to cause a denial of service (system hang) via a (1) read or (2) write operation. |
| CVE-2010-3442 | Multiple integer overflows in the snd_ctl_new function in sound/core/control.c in the Linux kernel before 2.6.36-rc5-next-20100929 allow local users to cause a denial of service (heap memory corruption) or possibly have unspecified other impact via a crafted (1) SNDRV_CTL_IOCTL_ELEM_ADD or (2) SNDRV_CTL_IOCTL_ELEM_REPLACE ioctl call. |
| CVE-2010-3437 | Integer signedness error in the pkt_find_dev_from_minor function in drivers/block/pktcdvd.c in the Linux kernel before 2.6.36-rc6 allows local users to obtain sensitive information from kernel memory or cause a denial of service (invalid pointer dereference and system crash) via a crafted index value in a PKT_CTRL_CMD_STATUS ioctl call. |
| CVE-2010-3432 | The sctp_packet_config function in net/sctp/output.c in the Linux kernel before 2.6.35.6 performs extraneous initializations of packet data structures, which allows remote attackers to cause a denial of service (panic) via a certain sequence of SCTP traffic. |
| CVE-2010-3310 | Multiple integer signedness errors in net/rose/af_rose.c in the Linux kernel before 2.6.36-rc5-next-20100923 allow local users to cause a denial of service (heap memory corruption) or possibly have unspecified other impact via a rose_getname function call, related to the rose_bind and rose_connect functions. |
| CVE-2010-3301 | The IA32 system call emulation functionality in arch/x86/ia32/ia32entry.S in the Linux kernel before 2.6.36-rc4-git2 on the x86_64 platform does not zero extend the %eax register after the 32-bit entry path to ptrace is used, which allows local users to gain privileges by triggering an out-of-bounds access to the system call table using the %rax register. NOTE: this vulnerability exists because of a CVE-2007-4573 regression. |
| CVE-2010-3298 | The hso_get_count function in drivers/net/usb/hso.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a TIOCGICOUNT ioctl call. |
| CVE-2010-3297 | The eql_g_master_cfg function in drivers/net/eql.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an EQL_GETMASTRCFG ioctl call. |
| CVE-2010-3296 | The cxgb_extension_ioctl function in drivers/net/cxgb3/cxgb3_main.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a CHELSIO_GET_QSET_NUM ioctl call. |
| CVE-2010-3110 | Multiple buffer overflows in the Novell Client novfs module for the Linux kernel in SUSE Linux Enterprise 11 SP1 and openSUSE 11.3 allow local users to gain privileges via unspecified vectors. |
| CVE-2010-3086 | include/asm-x86/futex.h in the Linux kernel before 2.6.25 does not properly implement exception fixup, which allows local users to cause a denial of service (panic) via an invalid application that triggers a page fault. |
| CVE-2010-3084 | Buffer overflow in the niu_get_ethtool_tcam_all function in drivers/net/niu.c in the Linux kernel before 2.6.36-rc4 allows local users to cause a denial of service or possibly have unspecified other impact via the ETHTOOL_GRXCLSRLALL ethtool command. |
| CVE-2010-3081 | The compat_alloc_user_space functions in include/asm/compat.h files in the Linux kernel before 2.6.36-rc4-git2 on 64-bit platforms do not properly allocate the userspace memory required for the 32-bit compatibility layer, which allows local users to gain privileges by leveraging the ability of the compat_mc_getsockopt function (aka the MCAST_MSFILTER getsockopt support) to control a certain length value, related to a "stack pointer underflow" issue, as exploited in the wild in September 2010. |
| CVE-2010-3080 | Double free vulnerability in the snd_seq_oss_open function in sound/core/seq/oss/seq_oss_init.c in the Linux kernel before 2.6.36-rc4 might allow local users to cause a denial of service or possibly have unspecified other impact via an unsuccessful attempt to open the /dev/sequencer device. |
| CVE-2010-3079 | kernel/trace/ftrace.c in the Linux kernel before 2.6.35.5, when debugfs is enabled, does not properly handle interaction between mutex possession and llseek operations, which allows local users to cause a denial of service (NULL pointer dereference and outage of all function tracing files) via an lseek call on a file descriptor associated with the set_ftrace_filter file. |
| CVE-2010-3078 | The xfs_ioc_fsgetxattr function in fs/xfs/linux-2.6/xfs_ioctl.c in the Linux kernel before 2.6.36-rc4 does not initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an ioctl call. |
| CVE-2010-3067 | Integer overflow in the do_io_submit function in fs/aio.c in the Linux kernel before 2.6.36-rc4-next-20100915 allows local users to cause a denial of service or possibly have unspecified other impact via crafted use of the io_submit system call. |
| CVE-2010-3066 | The io_submit_one function in fs/aio.c in the Linux kernel before 2.6.23 allows local users to cause a denial of service (NULL pointer dereference) via a crafted io_submit system call with an IOCB_FLAG_RESFD flag. |
| CVE-2010-3015 | Integer overflow in the ext4_ext_get_blocks function in fs/ext4/extents.c in the Linux kernel before 2.6.34 allows local users to cause a denial of service (BUG and system crash) via a write operation on the last block of a large file, followed by a sync operation. |
| CVE-2010-2963 | drivers/media/video/v4l2-compat-ioctl32.c in the Video4Linux (V4L) implementation in the Linux kernel before 2.6.36 on 64-bit platforms does not validate the destination of a memory copy operation, which allows local users to write to arbitrary kernel memory locations, and consequently gain privileges, via a VIDIOCSTUNER ioctl call on a /dev/video device, followed by a VIDIOCSMICROCODE ioctl call on this device. |
| CVE-2010-2962 | drivers/gpu/drm/i915/i915_gem.c in the Graphics Execution Manager (GEM) in the Intel i915 driver in the Direct Rendering Manager (DRM) subsystem in the Linux kernel before 2.6.36 does not properly validate pointers to blocks of memory, which allows local users to write to arbitrary kernel memory locations, and consequently gain privileges, via crafted use of the ioctl interface, related to (1) pwrite and (2) pread operations. |
| CVE-2010-2960 | The keyctl_session_to_parent function in security/keys/keyctl.c in the Linux kernel 2.6.35.4 and earlier expects that a certain parent session keyring exists, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a KEYCTL_SESSION_TO_PARENT argument to the keyctl function. |
| CVE-2010-2959 | Integer overflow in net/can/bcm.c in the Controller Area Network (CAN) implementation in the Linux kernel before 2.6.27.53, 2.6.32.x before 2.6.32.21, 2.6.34.x before 2.6.34.6, and 2.6.35.x before 2.6.35.4 allows attackers to execute arbitrary code or cause a denial of service (system crash) via crafted CAN traffic. |
| CVE-2010-2955 | The cfg80211_wext_giwessid function in net/wireless/wext-compat.c in the Linux kernel before 2.6.36-rc3-next-20100831 does not properly initialize certain structure members, which allows local users to leverage an off-by-one error in the ioctl_standard_iw_point function in net/wireless/wext-core.c, and obtain potentially sensitive information from kernel heap memory, via vectors involving an SIOCGIWESSID ioctl call that specifies a large buffer size. |
| CVE-2010-2954 | The irda_bind function in net/irda/af_irda.c in the Linux kernel before 2.6.36-rc3-next-20100901 does not properly handle failure of the irda_open_tsap function, which allows local users to cause a denial of service (NULL pointer dereference and panic) and possibly have unspecified other impact via multiple unsuccessful calls to bind on an AF_IRDA (aka PF_IRDA) socket. |
| CVE-2010-2946 | fs/jfs/xattr.c in the Linux kernel before 2.6.35.2 does not properly handle a certain legacy format for storage of extended attributes, which might allow local users by bypass intended xattr namespace restrictions via an "os2." substring at the beginning of a name. |
| CVE-2010-2943 | The xfs implementation in the Linux kernel before 2.6.35 does not look up inode allocation btrees before reading inode buffers, which allows remote authenticated users to read unlinked files, or read or overwrite disk blocks that are currently assigned to an active file but were previously assigned to an unlinked file, by accessing a stale NFS filehandle. |
| CVE-2010-2942 | The actions implementation in the network queueing functionality in the Linux kernel before 2.6.36-rc2 does not properly initialize certain structure members when performing dump operations, which allows local users to obtain potentially sensitive information from kernel memory via vectors related to (1) the tcf_gact_dump function in net/sched/act_gact.c, (2) the tcf_mirred_dump function in net/sched/act_mirred.c, (3) the tcf_nat_dump function in net/sched/act_nat.c, (4) the tcf_simp_dump function in net/sched/act_simple.c, and (5) the tcf_skbedit_dump function in net/sched/act_skbedit.c. |
| CVE-2010-2938 | arch/x86/hvm/vmx/vmcs.c in the virtual-machine control structure (VMCS) implementation in the Linux kernel 2.6.18 on Red Hat Enterprise Linux (RHEL) 5, when an Intel platform without Extended Page Tables (EPT) functionality is used, accesses VMCS fields without verifying hardware support for these fields, which allows local users to cause a denial of service (host OS crash) by requesting a VMCS dump for a fully virtualized Xen guest. |
| CVE-2010-2803 | The drm_ioctl function in drivers/gpu/drm/drm_drv.c in the Direct Rendering Manager (DRM) subsystem in the Linux kernel before 2.6.27.53, 2.6.32.x before 2.6.32.21, 2.6.34.x before 2.6.34.6, and 2.6.35.x before 2.6.35.4 allows local users to obtain potentially sensitive information from kernel memory by requesting a large memory-allocation amount. |
| CVE-2010-2798 | The gfs2_dirent_find_space function in fs/gfs2/dir.c in the Linux kernel before 2.6.35 uses an incorrect size value in calculations associated with sentinel directory entries, which allows local users to cause a denial of service (NULL pointer dereference and panic) and possibly have unspecified other impact by renaming a file in a GFS2 filesystem, related to the gfs2_rename function in fs/gfs2/ops_inode.c. |
| CVE-2010-2653 | Race condition in the hvc_close function in drivers/char/hvc_console.c in the Linux kernel before 2.6.34 allows local users to cause a denial of service or possibly have unspecified other impact by closing a Hypervisor Virtual Console device, related to the hvc_open and hvc_remove functions. |
| CVE-2010-2538 | Integer overflow in the btrfs_ioctl_clone function in fs/btrfs/ioctl.c in the Linux kernel before 2.6.35 might allow local users to obtain sensitive information via a BTRFS_IOC_CLONE_RANGE ioctl call. |
| CVE-2010-2537 | The btrfs_ioctl_clone function in fs/btrfs/ioctl.c in the Linux kernel before 2.6.35 allows local users to overwrite an append-only file via a (1) BTRFS_IOC_CLONE or (2) BTRFS_IOC_CLONE_RANGE ioctl call that specifies this file as a donor. |
| CVE-2010-2525 | A flaw was discovered in gfs2 file system’s handling of acls (access control lists). An unprivileged local attacker could exploit this flaw to gain access or execute any file stored in the gfs2 file system. |
| CVE-2010-2524 | The DNS resolution functionality in the CIFS implementation in the Linux kernel before 2.6.35, when CONFIG_CIFS_DFS_UPCALL is enabled, relies on a user's keyring for the dns_resolver upcall in the cifs.upcall userspace helper, which allows local users to spoof the results of DNS queries and perform arbitrary CIFS mounts via vectors involving an add_key call, related to a "cache stuffing" issue and MS-DFS referrals. |
| CVE-2010-2521 | Multiple buffer overflows in fs/nfsd/nfs4xdr.c in the XDR implementation in the NFS server in the Linux kernel before 2.6.34-rc6 allow remote attackers to cause a denial of service (panic) or possibly execute arbitrary code via a crafted NFSv4 compound WRITE request, related to the read_buf and nfsd4_decode_compound functions. |
| CVE-2010-2495 | The pppol2tp_xmit function in drivers/net/pppol2tp.c in the L2TP implementation in the Linux kernel before 2.6.34 does not properly validate certain values associated with an interface, which allows attackers to cause a denial of service (NULL pointer dereference and OOPS) or possibly have unspecified other impact via vectors related to a routing change. |
| CVE-2010-2492 | Buffer overflow in the ecryptfs_uid_hash macro in fs/ecryptfs/messaging.c in the eCryptfs subsystem in the Linux kernel before 2.6.35 might allow local users to gain privileges or cause a denial of service (system crash) via unspecified vectors. |
| CVE-2010-2478 | Integer overflow in the ethtool_get_rxnfc function in net/core/ethtool.c in the Linux kernel before 2.6.33.7 on 32-bit platforms allows local users to cause a denial of service or possibly have unspecified other impact via an ETHTOOL_GRXCLSRLALL ethtool command with a large info.rule_cnt value that triggers a buffer overflow, a different vulnerability than CVE-2010-3084. |
| CVE-2010-2248 | fs/cifs/cifssmb.c in the CIFS implementation in the Linux kernel before 2.6.34-rc4 allows remote attackers to cause a denial of service (panic) via an SMB response packet with an invalid CountHigh value, as demonstrated by a response from an OS/2 server, related to the CIFSSMBWrite and CIFSSMBWrite2 functions. |
| CVE-2010-2243 | A vulnerability exists in kernel/time/clocksource.c in the Linux kernel before 2.6.34 where on non-GENERIC_TIME systems (GENERIC_TIME=n), accessing /sys/devices/system/clocksource/clocksource0/current_clocksource results in an OOPS. |
| CVE-2010-2240 | The do_anonymous_page function in mm/memory.c in the Linux kernel before 2.6.27.52, 2.6.32.x before 2.6.32.19, 2.6.34.x before 2.6.34.4, and 2.6.35.x before 2.6.35.2 does not properly separate the stack and the heap, which allows context-dependent attackers to execute arbitrary code by writing to the bottom page of a shared memory segment, as demonstrated by a memory-exhaustion attack against the X.Org X server. |
| CVE-2010-2226 | The xfs_swapext function in fs/xfs/xfs_dfrag.c in the Linux kernel before 2.6.35 does not properly check the file descriptors passed to the SWAPEXT ioctl, which allows local users to leverage write access and obtain read access by swapping one file into another file. |
| CVE-2010-2071 | The btrfs_xattr_set_acl function in fs/btrfs/acl.c in btrfs in the Linux kernel 2.6.34 and earlier does not check file ownership before setting an ACL, which allows local users to bypass file permissions by setting arbitrary ACLs, as demonstrated using setfacl. |
| CVE-2010-2070 | arch/ia64/xen/faults.c in Xen 3.4 and 4.0 in Linux kernel 2.6.18, and possibly other kernel versions, when running on IA-64 architectures, allows local users to cause a denial of service and "turn on BE by modifying the user mask of the PSR," as demonstrated via exploitation of CVE-2006-0742. |
| CVE-2010-2066 | The mext_check_arguments function in fs/ext4/move_extent.c in the Linux kernel before 2.6.35 allows local users to overwrite an append-only file via a MOVE_EXT ioctl call that specifies this file as a donor. |
| CVE-2010-1643 | mm/shmem.c in the Linux kernel before 2.6.28-rc3, when strict overcommit is enabled, does not properly handle the export of shmemfs objects by knfsd, which allows attackers to cause a denial of service (NULL pointer dereference and knfsd crash) or possibly have unspecified other impact via unknown vectors. |
| CVE-2010-1641 | The do_gfs2_set_flags function in fs/gfs2/file.c in the Linux kernel before 2.6.34-git10 does not verify the ownership of a file, which allows local users to bypass intended access restrictions via a SETFLAGS ioctl request. |
| CVE-2010-1636 | The btrfs_ioctl_clone function in fs/btrfs/ioctl.c in the btrfs functionality in the Linux kernel 2.6.29 through 2.6.32, and possibly other versions, does not ensure that a cloned file descriptor has been opened for reading, which allows local users to read sensitive information from a write-only file descriptor. |
| CVE-2010-1488 | The proc_oom_score function in fs/proc/base.c in the Linux kernel before 2.6.34-rc4 uses inappropriate data structures during selection of a candidate for the OOM killer, which might allow local users to cause a denial of service via unspecified patterns of task creation. |
| CVE-2010-1451 | The TSB I-TLB load implementation in arch/sparc/kernel/tsb.S in the Linux kernel before 2.6.33 on the SPARC platform does not properly obtain the value of a certain _PAGE_EXEC_4U bit and consequently does not properly implement a non-executable stack, which makes it easier for context-dependent attackers to exploit stack-based buffer overflows via a crafted application. |
| CVE-2010-1446 | arch/powerpc/mm/fsl_booke_mmu.c in KGDB in the Linux kernel 2.6.30 and other versions before 2.6.33, when running on PowerPC, does not properly perform a security check for access to a kernel page, which allows local users to overwrite arbitrary kernel memory, related to Fsl booke. |
| CVE-2010-1437 | Race condition in the find_keyring_by_name function in security/keys/keyring.c in the Linux kernel 2.6.34-rc5 and earlier allows local users to cause a denial of service (memory corruption and system crash) or possibly have unspecified other impact via keyctl session commands that trigger access to a dead keyring that is undergoing deletion by the key_cleanup function. |
| CVE-2010-1436 | gfs2 in the Linux kernel 2.6.18, and possibly other versions, does not properly handle when the gfs2_quota struct occupies two separate pages, which allows local users to cause a denial of service (kernel panic) via certain manipulations that cause an out-of-bounds write, as demonstrated by writing from an ext3 file system to a gfs2 file system. |
| CVE-2010-1188 | Use-after-free vulnerability in net/ipv4/tcp_input.c in the Linux kernel 2.6 before 2.6.20, when IPV6_RECVPKTINFO is set on a listening socket, allows remote attackers to cause a denial of service (kernel panic) via a SYN packet while the socket is in a listening (TCP_LISTEN) state, which is not properly handled and causes the skb structure to be freed. |
| CVE-2010-1187 | The Transparent Inter-Process Communication (TIPC) functionality in Linux kernel 2.6.16-rc1 through 2.6.33, and possibly other versions, allows local users to cause a denial of service (kernel OOPS) by sending datagrams through AF_TIPC before entering network mode, which triggers a NULL pointer dereference. |
| CVE-2010-1173 | The sctp_process_unk_param function in net/sctp/sm_make_chunk.c in the Linux kernel 2.6.33.3 and earlier, when SCTP is enabled, allows remote attackers to cause a denial of service (system crash) via an SCTPChunkInit packet containing multiple invalid parameters that require a large amount of error data. |
| CVE-2010-1162 | The release_one_tty function in drivers/char/tty_io.c in the Linux kernel before 2.6.34-rc4 omits certain required calls to the put_pid function, which has unspecified impact and local attack vectors. |
| CVE-2010-1148 | The cifs_create function in fs/cifs/dir.c in the Linux kernel 2.6.33.2 and earlier allows local users to cause a denial of service (NULL pointer dereference and OOPS) or possibly have unspecified other impact via a NULL nameidata (aka nd) field in a POSIX file-creation request to a server that supports UNIX extensions. |
| CVE-2010-1146 | The Linux kernel 2.6.33.2 and earlier, when a ReiserFS filesystem exists, does not restrict read or write access to the .reiserfs_priv directory, which allows local users to gain privileges by modifying (1) extended attributes or (2) ACLs, as demonstrated by deleting a file under .reiserfs_priv/xattrs/. |
| CVE-2010-1088 | fs/namei.c in Linux kernel 2.6.18 through 2.6.34 does not always follow NFS automount "symlinks," which allows attackers to have an unknown impact, related to LOOKUP_FOLLOW. |
| CVE-2010-1087 | The nfs_wait_on_request function in fs/nfs/pagelist.c in Linux kernel 2.6.x through 2.6.33-rc5 allows attackers to cause a denial of service (Oops) via unknown vectors related to truncating a file and an operation that is not interruptible. |
| CVE-2010-1086 | The ULE decapsulation functionality in drivers/media/dvb/dvb-core/dvb_net.c in dvb-core in Linux kernel 2.6.33 and earlier allows attackers to cause a denial of service (infinite loop) via a crafted MPEG2-TS frame, related to an invalid Payload Pointer ULE. |
| CVE-2010-1085 | The azx_position_ok function in hda_intel.c in Linux kernel 2.6.33-rc4 and earlier, when running on the AMD780V chip set, allows context-dependent attackers to cause a denial of service (crash) via unknown manipulations that trigger a divide-by-zero error. |
| CVE-2010-1084 | Linux kernel 2.6.18 through 2.6.33, and possibly other versions, allows remote attackers to cause a denial of service (memory corruption) via a large number of Bluetooth sockets, related to the size of sysfs files in (1) net/bluetooth/l2cap.c, (2) net/bluetooth/rfcomm/core.c, (3) net/bluetooth/rfcomm/sock.c, and (4) net/bluetooth/sco.c. |
| CVE-2010-1083 | The processcompl_compat function in drivers/usb/core/devio.c in Linux kernel 2.6.x through 2.6.32, and possibly other versions, does not clear the transfer buffer before returning to userspace when a USB command fails, which might make it easier for physically proximate attackers to obtain sensitive information (kernel memory). |
| CVE-2010-0743 | Multiple format string vulnerabilities in isns.c in (1) Linux SCSI target framework (aka tgt or scsi-target-utils) 1.0.3, 0.9.5, and earlier and (2) iSCSI Enterprise Target (aka iscsitarget) 0.4.16 allow remote attackers to cause a denial of service (tgtd daemon crash) or possibly have unspecified other impact via vectors that involve the isns_attr_query and qry_rsp_handle functions, and are related to (a) client appearance and (b) client disappearance messages. |
| CVE-2010-0741 | The virtio_net_bad_features function in hw/virtio-net.c in the virtio-net driver in the Linux kernel before 2.6.26, when used on a guest OS in conjunction with qemu-kvm 0.11.0 or KVM 83, allows remote attackers to cause a denial of service (guest OS crash, and an associated qemu-kvm process exit) by sending a large amount of network traffic to a TCP port on the guest OS, related to a virtio-net whitelist that includes an improper implementation of TCP Segment Offloading (TSO). |
| CVE-2010-0730 | The MMIO instruction decoder in the Xen hypervisor in the Linux kernel 2.6.18 in Red Hat Enterprise Linux (RHEL) 5 allows guest OS users to cause a denial of service (32-bit guest OS crash) via vectors that trigger an unspecified instruction emulation. |
| CVE-2010-0729 | A certain Red Hat patch for the Linux kernel in Red Hat Enterprise Linux (RHEL) 4 on the ia64 platform allows local users to use ptrace on an arbitrary process, and consequently gain privileges, via vectors related to a missing ptrace_check_attach call. |
| CVE-2010-0727 | The gfs2_lock function in the Linux kernel before 2.6.34-rc1-next-20100312, and the gfs_lock function in the Linux kernel on Red Hat Enterprise Linux (RHEL) 5 and 6, does not properly remove POSIX locks on files that are setgid without group-execute permission, which allows local users to cause a denial of service (BUG and system crash) by locking a file on a (1) GFS or (2) GFS2 filesystem, and then changing this file's permissions. |
| CVE-2010-0623 | The futex_lock_pi function in kernel/futex.c in the Linux kernel before 2.6.33-rc7 does not properly manage a certain reference count, which allows local users to cause a denial of service (OOPS) via vectors involving an unmount of an ext3 filesystem. |
| CVE-2010-0622 | The wake_futex_pi function in kernel/futex.c in the Linux kernel before 2.6.33-rc7 does not properly handle certain unlock operations for a Priority Inheritance (PI) futex, which allows local users to cause a denial of service (OOPS) and possibly have unspecified other impact via vectors involving modification of the futex value from user space. |
| CVE-2010-0437 | The ip6_dst_lookup_tail function in net/ipv6/ip6_output.c in the Linux kernel before 2.6.27 does not properly handle certain circumstances involving an IPv6 TUN network interface and a large number of neighbors, which allows attackers to cause a denial of service (NULL pointer dereference and OOPS) or possibly have unspecified other impact via unknown vectors. |
| CVE-2010-0415 | The do_pages_move function in mm/migrate.c in the Linux kernel before 2.6.33-rc7 does not validate node values, which allows local users to read arbitrary kernel memory locations, cause a denial of service (OOPS), and possibly have unspecified other impact by specifying a node that is not part of the kernel's node set. |
| CVE-2010-0410 | drivers/connector/connector.c in the Linux kernel before 2.6.32.8 allows local users to cause a denial of service (memory consumption and system crash) by sending the kernel many NETLINK_CONNECTOR messages. |
| CVE-2010-0309 | The pit_ioport_read function in the Programmable Interval Timer (PIT) emulation in i8254.c in KVM 83 does not properly use the pit_state data structure, which allows guest OS users to cause a denial of service (host OS crash or hang) by attempting to read the /dev/port file. |
| CVE-2010-0307 | The load_elf_binary function in fs/binfmt_elf.c in the Linux kernel before 2.6.32.8 on the x86_64 platform does not ensure that the ELF interpreter is available before a call to the SET_PERSONALITY macro, which allows local users to cause a denial of service (system crash) via a 32-bit application that attempts to execute a 64-bit application and then triggers a segmentation fault, as demonstrated by amd64_killer, related to the flush_old_exec function. |
| CVE-2010-0306 | The x86 emulator in KVM 83, when a guest is configured for Symmetric Multiprocessing (SMP), does not use the Current Privilege Level (CPL) and I/O Privilege Level (IOPL) to restrict instruction execution, which allows guest OS users to cause a denial of service (guest OS crash) or gain privileges on the guest OS by leveraging access to a (1) IO port or (2) MMIO region, and replacing an instruction in between emulator entry and instruction fetch, a related issue to CVE-2010-0298. |
| CVE-2010-0298 | The x86 emulator in KVM 83 does not use the Current Privilege Level (CPL) and I/O Privilege Level (IOPL) in determining the memory access available to CPL3 code, which allows guest OS users to cause a denial of service (guest OS crash) or gain privileges on the guest OS by leveraging access to a (1) IO port or (2) MMIO region, a related issue to CVE-2010-0306. |
| CVE-2010-0297 | Buffer overflow in the usb_host_handle_control function in the USB passthrough handling implementation in usb-linux.c in QEMU before 0.11.1 allows guest OS users to cause a denial of service (guest OS crash or hang) or possibly execute arbitrary code on the host OS via a crafted USB packet. |
| CVE-2010-0291 | The Linux kernel before 2.6.32.4 allows local users to gain privileges or cause a denial of service (panic) by calling the (1) mmap or (2) mremap function, aka the "do_mremap() mess" or "mremap/mmap mess." |
| CVE-2010-0148 | Unspecified vulnerability in Cisco Security Agent 5.2 before 5.2.0.285, when running on Linux, allows remote attackers to cause a denial of service (kernel panic) via "a series of TCP packets." |
| CVE-2010-0008 | The sctp_rcv_ootb function in the SCTP implementation in the Linux kernel before 2.6.23 allows remote attackers to cause a denial of service (infinite loop) via (1) an Out Of The Blue (OOTB) chunk or (2) a chunk of zero length. |
| CVE-2010-0007 | net/bridge/netfilter/ebtables.c in the ebtables module in the netfilter framework in the Linux kernel before 2.6.33-rc4 does not require the CAP_NET_ADMIN capability for setting or modifying rules, which allows local users to bypass intended access restrictions and configure arbitrary network-traffic filtering via a modified ebtables application. |
| CVE-2010-0006 | The ipv6_hop_jumbo function in net/ipv6/exthdrs.c in the Linux kernel before 2.6.32.4, when network namespaces are enabled, allows remote attackers to cause a denial of service (NULL pointer dereference) via an invalid IPv6 jumbogram, a related issue to CVE-2007-4567. |
| CVE-2010-0003 | The print_fatal_signal function in kernel/signal.c in the Linux kernel before 2.6.32.4 on the i386 platform, when print-fatal-signals is enabled, allows local users to discover the contents of arbitrary memory locations by jumping to an address and then reading a log file, and might allow local users to cause a denial of service (system slowdown or crash) by jumping to an address. |
| CVE-2009-4895 | Race condition in the tty_fasync function in drivers/char/tty_io.c in the Linux kernel before 2.6.32.6 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via unknown vectors, related to the put_tty_queue and __f_setown functions. NOTE: the vulnerability was addressed in a different way in 2.6.32.9. |
| CVE-2009-4538 | drivers/net/e1000e/netdev.c in the e1000e driver in the Linux kernel 2.6.32.3 and earlier does not properly check the size of an Ethernet frame that exceeds the MTU, which allows remote attackers to have an unspecified impact via crafted packets, a related issue to CVE-2009-4537. |
| CVE-2009-4537 | drivers/net/r8169.c in the r8169 driver in the Linux kernel 2.6.32.3 and earlier does not properly check the size of an Ethernet frame that exceeds the MTU, which allows remote attackers to (1) cause a denial of service (temporary network outage) via a packet with a crafted size, in conjunction with certain packets containing A characters and certain packets containing E characters; or (2) cause a denial of service (system crash) via a packet with a crafted size, in conjunction with certain packets containing '\0' characters, related to the value of the status register and erroneous behavior associated with the RxMaxSize register. NOTE: this vulnerability exists because of an incorrect fix for CVE-2009-1389. |
| CVE-2009-4536 | drivers/net/e1000/e1000_main.c in the e1000 driver in the Linux kernel 2.6.32.3 and earlier handles Ethernet frames that exceed the MTU by processing certain trailing payload data as if it were a complete frame, which allows remote attackers to bypass packet filters via a large packet with a crafted payload. NOTE: this vulnerability exists because of an incorrect fix for CVE-2009-1385. |
| CVE-2009-4410 | The fuse_ioctl_copy_user function in the ioctl handler in fs/fuse/file.c in the Linux kernel 2.6.29-rc1 through 2.6.30.y uses the wrong variable in an argument to the kunmap function, which allows local users to cause a denial of service (panic) via unknown vectors. |
| CVE-2009-4308 | The ext4_decode_error function in fs/ext4/super.c in the ext4 filesystem in the Linux kernel before 2.6.32 allows user-assisted remote attackers to cause a denial of service (NULL pointer dereference), and possibly have unspecified other impact, via a crafted read-only filesystem that lacks a journal. |
| CVE-2009-4307 | The ext4_fill_flex_info function in fs/ext4/super.c in the Linux kernel before 2.6.32-git6 allows user-assisted remote attackers to cause a denial of service (divide-by-zero error and panic) via a malformed ext4 filesystem containing a super block with a large FLEX_BG group size (aka s_log_groups_per_flex value). |
| CVE-2009-4306 | Unspecified vulnerability in the EXT4_IOC_MOVE_EXT (aka move extents) ioctl implementation in the ext4 filesystem in the Linux kernel 2.6.32-git6 and earlier allows local users to cause a denial of service (filesystem corruption) via unknown vectors, a different vulnerability than CVE-2009-4131. |
| CVE-2009-4272 | A certain Red Hat patch for net/ipv4/route.c in the Linux kernel 2.6.18 on Red Hat Enterprise Linux (RHEL) 5 allows remote attackers to cause a denial of service (deadlock) via crafted packets that force collisions in the IPv4 routing hash table, and trigger a routing "emergency" in which a hash chain is too long. NOTE: this is related to an issue in the Linux kernel before 2.6.31, when the kernel routing cache is disabled, involving an uninitialized pointer and a panic. |
| CVE-2009-4271 | The Linux kernel 2.6.9 through 2.6.17 on the x86_64 and amd64 platforms allows local users to cause a denial of service (panic) via a 32-bit application that calls mprotect on its Virtual Dynamic Shared Object (VDSO) page and then triggers a segmentation fault. |
| CVE-2009-4141 | Use-after-free vulnerability in the fasync_helper function in fs/fcntl.c in the Linux kernel before 2.6.33-rc4-git1 allows local users to gain privileges via vectors that include enabling O_ASYNC (aka FASYNC or FIOASYNC) on a locked file, and then closing this file. |
| CVE-2009-4138 | drivers/firewire/ohci.c in the Linux kernel before 2.6.32-git9, when packet-per-buffer mode is used, allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unknown other impact via an unspecified ioctl associated with receiving an ISO packet that contains zero in the payload-length field. |
| CVE-2009-4131 | The EXT4_IOC_MOVE_EXT (aka move extents) ioctl implementation in the ext4 filesystem in the Linux kernel before 2.6.32-git6 allows local users to overwrite arbitrary files via a crafted request, related to insufficient checks for file permissions. |
| CVE-2009-4067 | Buffer overflow in the auerswald_probe function in the Auerswald Linux USB driver for the Linux kernel before 2.6.27 allows physically proximate attackers to execute arbitrary code, cause a denial of service via a crafted USB device, or take full control of the system. |
| CVE-2009-4031 | The do_insn_fetch function in arch/x86/kvm/emulate.c in the x86 emulator in the KVM subsystem in the Linux kernel before 2.6.32-rc8-next-20091125 tries to interpret instructions that contain too many bytes to be valid, which allows guest OS users to cause a denial of service (increased scheduling latency) on the host OS via unspecified manipulations related to SMP support. |
| CVE-2009-4027 | Race condition in the mac80211 subsystem in the Linux kernel before 2.6.32-rc8-next-20091201 allows remote attackers to cause a denial of service (system crash) via a Delete Block ACK (aka DELBA) packet that triggers a certain state change in the absence of an aggregation session. |
| CVE-2009-4026 | The mac80211 subsystem in the Linux kernel before 2.6.32-rc8-next-20091201 allows remote attackers to cause a denial of service (panic) via a crafted Delete Block ACK (aka DELBA) packet, related to an erroneous "code shuffling patch." |
| CVE-2009-4021 | The fuse_direct_io function in fs/fuse/file.c in the fuse subsystem in the Linux kernel before 2.6.32-rc7 might allow attackers to cause a denial of service (invalid pointer dereference and OOPS) via vectors possibly related to a memory-consumption attack. |
| CVE-2009-4020 | Stack-based buffer overflow in the hfs subsystem in the Linux kernel 2.6.32 allows remote attackers to have an unspecified impact via a crafted Hierarchical File System (HFS) filesystem, related to the hfs_readdir function in fs/hfs/dir.c. |
| CVE-2009-4005 | The collect_rx_frame function in drivers/isdn/hisax/hfc_usb.c in the Linux kernel before 2.6.32-rc7 allows attackers to have an unspecified impact via a crafted HDLC packet that arrives over ISDN and triggers a buffer under-read. |
| CVE-2009-4004 | Buffer overflow in the kvm_vcpu_ioctl_x86_setup_mce function in arch/x86/kvm/x86.c in the KVM subsystem in the Linux kernel before 2.6.32-rc7 allows local users to cause a denial of service (memory corruption) or possibly gain privileges via a KVM_X86_SETUP_MCE IOCTL request that specifies a large number of Machine Check Exception (MCE) banks. |
| CVE-2009-3939 | The poll_mode_io file for the megaraid_sas driver in the Linux kernel 2.6.31.6 and earlier has world-writable permissions, which allows local users to change the I/O mode of the driver by modifying this file. |
| CVE-2009-3889 | The dbg_lvl file for the megaraid_sas driver in the Linux kernel before 2.6.27 has world-writable permissions, which allows local users to change the (1) behavior and (2) logging level of the driver by modifying this file. |
| CVE-2009-3888 | The do_mmap_pgoff function in mm/nommu.c in the Linux kernel before 2.6.31.6, when the CPU lacks a memory management unit, allows local users to cause a denial of service (OOPS) via an application that attempts to allocate a large amount of memory. |
| CVE-2009-3726 | The nfs4_proc_lock function in fs/nfs/nfs4proc.c in the NFSv4 client in the Linux kernel before 2.6.31-rc4 allows remote NFS servers to cause a denial of service (NULL pointer dereference and panic) by sending a certain response containing incorrect file attributes, which trigger attempted use of an open file that lacks NFSv4 state. |
| CVE-2009-3725 | The connector layer in the Linux kernel before 2.6.31.5 does not require the CAP_SYS_ADMIN capability for certain interaction with the (1) uvesafb, (2) pohmelfs, (3) dst, or (4) dm subsystem, which allows local users to bypass intended access restrictions and gain privileges via calls to functions in these subsystems. |
| CVE-2009-3722 | The handle_dr function in arch/x86/kvm/vmx.c in the KVM subsystem in the Linux kernel before 2.6.31.1 does not properly verify the Current Privilege Level (CPL) before accessing a debug register, which allows guest OS users to cause a denial of service (trap) on the host OS via a crafted application. |
| CVE-2009-3640 | The update_cr8_intercept function in arch/x86/kvm/x86.c in the KVM subsystem in the Linux kernel before 2.6.32-rc1 does not properly handle the absence of an Advanced Programmable Interrupt Controller (APIC), which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly gain privileges via a call to the kvm_vcpu_ioctl function. |
| CVE-2009-3638 | Integer overflow in the kvm_dev_ioctl_get_supported_cpuid function in arch/x86/kvm/x86.c in the KVM subsystem in the Linux kernel before 2.6.31.4 allows local users to have an unspecified impact via a KVM_GET_SUPPORTED_CPUID request to the kvm_arch_dev_ioctl function. |
| CVE-2009-3624 | The get_instantiation_keyring function in security/keys/keyctl.c in the KEYS subsystem in the Linux kernel before 2.6.32-rc5 does not properly maintain the reference count of a keyring, which allows local users to gain privileges or cause a denial of service (OOPS) via vectors involving calls to this function without specifying a keyring by ID, as demonstrated by a series of keyctl request2 and keyctl list commands. |
| CVE-2009-3623 | The lookup_cb_cred function in fs/nfsd/nfs4callback.c in the nfsd4 subsystem in the Linux kernel before 2.6.31.2 attempts to access a credentials cache even when a client specifies the AUTH_NULL authentication flavor, which allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) via an NFSv4 mount request. |
| CVE-2009-3621 | net/unix/af_unix.c in the Linux kernel 2.6.31.4 and earlier allows local users to cause a denial of service (system hang) by creating an abstract-namespace AF_UNIX listening socket, performing a shutdown operation on this socket, and then performing a series of connect operations to this socket. |
| CVE-2009-3620 | The ATI Rage 128 (aka r128) driver in the Linux kernel before 2.6.31-git11 does not properly verify Concurrent Command Engine (CCE) state initialization, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly gain privileges via unspecified ioctl calls. |
| CVE-2009-3613 | The swiotlb functionality in the r8169 driver in drivers/net/r8169.c in the Linux kernel before 2.6.27.22 allows remote attackers to cause a denial of service (IOMMU space exhaustion and system crash) by using jumbo frames for a large amount of network traffic, as demonstrated by a flood ping. |
| CVE-2009-3612 | The tcf_fill_node function in net/sched/cls_api.c in the netlink subsystem in the Linux kernel 2.6.x before 2.6.32-rc5, and 2.4.37.6 and earlier, does not initialize a certain tcm__pad2 structure member, which might allow local users to obtain sensitive information from kernel memory via unspecified vectors. NOTE: this issue exists because of an incomplete fix for CVE-2005-4881. |
| CVE-2009-3556 | A certain Red Hat configuration step for the qla2xxx driver in the Linux kernel 2.6.18 on Red Hat Enterprise Linux (RHEL) 5, when N_Port ID Virtualization (NPIV) hardware is used, sets world-writable permissions for the (1) vport_create and (2) vport_delete files under /sys/class/scsi_host/, which allows local users to make arbitrary changes to SCSI host attributes by modifying these files. |
| CVE-2009-3547 | Multiple race conditions in fs/pipe.c in the Linux kernel before 2.6.32-rc6 allow local users to cause a denial of service (NULL pointer dereference and system crash) or gain privileges by attempting to open an anonymous pipe via a /proc/*/fd/ pathname. |
| CVE-2009-3290 | The kvm_emulate_hypercall function in arch/x86/kvm/x86.c in KVM in the Linux kernel 2.6.25-rc1, and other versions before 2.6.31, when running on x86 systems, does not prevent access to MMU hypercalls from ring 0, which allows local guest OS users to cause a denial of service (guest kernel crash) and read or write guest kernel memory via unspecified "random addresses." |
| CVE-2009-3288 | The sg_build_indirect function in drivers/scsi/sg.c in Linux kernel 2.6.28-rc1 through 2.6.31-rc8 uses an incorrect variable when accessing an array, which allows local users to cause a denial of service (kernel OOPS and NULL pointer dereference), as demonstrated by using xcdroast to duplicate a CD. NOTE: this is only exploitable by users who can open the cdrom device. |
| CVE-2009-3286 | NFSv4 in the Linux kernel 2.6.18, and possibly other versions, does not properly clean up an inode when an O_EXCL create fails, which causes files to be created with insecure settings such as setuid bits, and possibly allows local users to gain privileges, related to the execution of the do_open_permission function even when a create fails. |
| CVE-2009-3280 | Integer signedness error in the find_ie function in net/wireless/scan.c in the cfg80211 subsystem in the Linux kernel before 2.6.31.1-rc1 allows remote attackers to cause a denial of service (soft lockup) via malformed packets. |
| CVE-2009-3238 | The get_random_int function in drivers/char/random.c in the Linux kernel before 2.6.30 produces insufficiently random numbers, which allows attackers to predict the return value, and possibly defeat protection mechanisms based on randomization, via vectors that leverage the function's tendency to "return the same value over and over again for long stretches of time." |
| CVE-2009-3234 | Buffer overflow in the perf_copy_attr function in kernel/perf_counter.c in the Linux kernel 2.6.31-rc1 allows local users to cause a denial of service (crash) and execute arbitrary code via a "big size data" to the perf_counter_open system call. |
| CVE-2009-3228 | The tc_fill_tclass function in net/sched/sch_api.c in the tc subsystem in the Linux kernel 2.4.x before 2.4.37.6 and 2.6.x before 2.6.31-rc9 does not initialize certain (1) tcm__pad1 and (2) tcm__pad2 structure members, which might allow local users to obtain sensitive information from kernel memory via unspecified vectors. |
| CVE-2009-3080 | Array index error in the gdth_read_event function in drivers/scsi/gdth.c in the Linux kernel before 2.6.32-rc8 allows local users to cause a denial of service or possibly gain privileges via a negative event index in an IOCTL request. |
| CVE-2009-3043 | The tty_ldisc_hangup function in drivers/char/tty_ldisc.c in the Linux kernel 2.6.31-rc before 2.6.31-rc8 allows local users to cause a denial of service (system crash, sometimes preceded by a NULL pointer dereference) or possibly gain privileges via certain pseudo-terminal I/O activity, as demonstrated by KernelTtyTest.c. |
| CVE-2009-3002 | The Linux kernel before 2.6.31-rc7 does not initialize certain data structures within getname functions, which allows local users to read the contents of some kernel memory locations by calling getsockname on (1) an AF_APPLETALK socket, related to the atalk_getname function in net/appletalk/ddp.c; (2) an AF_IRDA socket, related to the irda_getname function in net/irda/af_irda.c; (3) an AF_ECONET socket, related to the econet_getname function in net/econet/af_econet.c; (4) an AF_NETROM socket, related to the nr_getname function in net/netrom/af_netrom.c; (5) an AF_ROSE socket, related to the rose_getname function in net/rose/af_rose.c; or (6) a raw CAN socket, related to the raw_getname function in net/can/raw.c. |
| CVE-2009-3001 | The llc_ui_getname function in net/llc/af_llc.c in the Linux kernel 2.6.31-rc7 and earlier does not initialize a certain data structure, which allows local users to read the contents of some kernel memory locations by calling getsockname on an AF_LLC socket. |
| CVE-2009-2910 | arch/x86/ia32/ia32entry.S in the Linux kernel before 2.6.31.4 on the x86_64 platform does not clear certain kernel registers before a return to user mode, which allows local users to read register values from an earlier process by switching an ia32 process to 64-bit mode. |
| CVE-2009-2909 | Integer signedness error in the ax25_setsockopt function in net/ax25/af_ax25.c in the ax25 subsystem in the Linux kernel before 2.6.31.2 allows local users to cause a denial of service (OOPS) via a crafted optlen value in an SO_BINDTODEVICE operation. |
| CVE-2009-2908 | The d_delete function in fs/ecryptfs/inode.c in eCryptfs in the Linux kernel 2.6.31 allows local users to cause a denial of service (kernel OOPS) and possibly execute arbitrary code via unspecified vectors that cause a "negative dentry" and trigger a NULL pointer dereference, as demonstrated via a Mutt temporary directory in an eCryptfs mount. |
| CVE-2009-2903 | Memory leak in the appletalk subsystem in the Linux kernel 2.4.x through 2.4.37.6 and 2.6.x through 2.6.31, when the appletalk and ipddp modules are loaded but the ipddp"N" device is not found, allows remote attackers to cause a denial of service (memory consumption) via IP-DDP datagrams. |
| CVE-2009-2849 | The md driver (drivers/md/md.c) in the Linux kernel before 2.6.30.2 might allow local users to cause a denial of service (NULL pointer dereference) via vectors related to "suspend_* sysfs attributes" and the (1) suspend_lo_store or (2) suspend_hi_store functions. NOTE: this is only a vulnerability when sysfs is writable by an attacker. |
| CVE-2009-2848 | The execve function in the Linux kernel, possibly 2.6.30-rc6 and earlier, does not properly clear the current->clear_child_tid pointer, which allows local users to cause a denial of service (memory corruption) or possibly gain privileges via a clone system call with CLONE_CHILD_SETTID or CLONE_CHILD_CLEARTID enabled, which is not properly handled during thread creation and exit. |
| CVE-2009-2847 | The do_sigaltstack function in kernel/signal.c in Linux kernel 2.4 through 2.4.37 and 2.6 before 2.6.31-rc5, when running on 64-bit systems, does not clear certain padding bytes from a structure, which allows local users to obtain sensitive information from the kernel stack via the sigaltstack function. |
| CVE-2009-2846 | The eisa_eeprom_read function in the parisc isa-eeprom component (drivers/parisc/eisa_eeprom.c) in the Linux kernel before 2.6.31-rc6 allows local users to access restricted memory via a negative ppos argument, which bypasses a check that assumes that ppos is positive and causes an out-of-bounds read in the readb function. |
| CVE-2009-2844 | cfg80211 in net/wireless/scan.c in the Linux kernel 2.6.30-rc1 and other versions before 2.6.31-rc6 allows remote attackers to cause a denial of service (crash) via a sequence of beacon frames in which one frame omits an SSID Information Element (IE) and the subsequent frame contains an SSID IE, which triggers a NULL pointer dereference in the cmp_ies function. NOTE: a potential weakness in the is_mesh function was also addressed, but the relevant condition did not exist in the code, so it is not a vulnerability. |
| CVE-2009-2768 | The load_flat_shared_library function in fs/binfmt_flat.c in the flat subsystem in the Linux kernel before 2.6.31-rc6 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by executing a shared flat binary, which triggers an access of an "uninitialized cred pointer." |
| CVE-2009-2767 | The init_posix_timers function in kernel/posix-timers.c in the Linux kernel before 2.6.31-rc6 allows local users to cause a denial of service (OOPS) or possibly gain privileges via a CLOCK_MONOTONIC_RAW clock_nanosleep call that triggers a NULL pointer dereference. |
| CVE-2009-2707 | Unspecified vulnerability in ia32el (aka the IA 32 emulation functionality) before 7042_7022-0.4.2 in SUSE Linux Enterprise (SLE) 10 SP2 on Itanium IA64 machines allows local users to cause a denial of service (system crash) via a 32-bit x86 application. |
| CVE-2009-2698 | The udp_sendmsg function in the UDP implementation in (1) net/ipv4/udp.c and (2) net/ipv6/udp.c in the Linux kernel before 2.6.19 allows local users to gain privileges or cause a denial of service (NULL pointer dereference and system crash) via vectors involving the MSG_MORE flag and a UDP socket. |
| CVE-2009-2695 | The Linux kernel before 2.6.31-rc7 does not properly prevent mmap operations that target page zero and other low memory addresses, which allows local users to gain privileges by exploiting NULL pointer dereference vulnerabilities, related to (1) the default configuration of the allow_unconfined_mmap_low boolean in SELinux on Red Hat Enterprise Linux (RHEL) 5, (2) an error that causes allow_unconfined_mmap_low to be ignored in the unconfined_t domain, (3) lack of a requirement for the CAP_SYS_RAWIO capability for these mmap operations, and (4) interaction between the mmap_min_addr protection mechanism and certain application programs. |
| CVE-2009-2692 | The Linux kernel 2.6.0 through 2.6.30.4, and 2.4.4 through 2.4.37.4, does not initialize all function pointers for socket operations in proto_ops structures, which allows local users to trigger a NULL pointer dereference and gain privileges by using mmap to map page zero, placing arbitrary code on this page, and then invoking an unavailable operation, as demonstrated by the sendpage operation (sock_sendpage function) on a PF_PPPOX socket. |
| CVE-2009-2691 | The mm_for_maps function in fs/proc/base.c in the Linux kernel 2.6.30.4 and earlier allows local users to read (1) maps and (2) smaps files under proc/ via vectors related to ELF loading, a setuid process, and a race condition. |
| CVE-2009-2584 | Off-by-one error in the options_write function in drivers/misc/sgi-gru/gruprocfs.c in the SGI GRU driver in the Linux kernel 2.6.30.2 and earlier on ia64 and x86 platforms might allow local users to overwrite arbitrary memory locations and gain privileges via a crafted count argument, which triggers a stack-based buffer overflow. |
| CVE-2009-2407 | Heap-based buffer overflow in the parse_tag_3_packet function in fs/ecryptfs/keystore.c in the eCryptfs subsystem in the Linux kernel before 2.6.30.4 allows local users to cause a denial of service (system crash) or possibly gain privileges via vectors involving a crafted eCryptfs file, related to a large encrypted key size in a Tag 3 packet. |
| CVE-2009-2406 | Stack-based buffer overflow in the parse_tag_11_packet function in fs/ecryptfs/keystore.c in the eCryptfs subsystem in the Linux kernel before 2.6.30.4 allows local users to cause a denial of service (system crash) or possibly gain privileges via vectors involving a crafted eCryptfs file, related to not ensuring that the key signature length in a Tag 11 packet is compatible with the key signature buffer size. |
| CVE-2009-2287 | The kvm_arch_vcpu_ioctl_set_sregs function in the KVM in Linux kernel 2.6 before 2.6.30, when running on x86 systems, does not validate the page table root in a KVM_SET_SREGS call, which allows local users to cause a denial of service (crash or hang) via a crafted cr3 value, which triggers a NULL pointer dereference in the gfn_to_rmap function. |
| CVE-2009-1961 | The inode double locking code in fs/ocfs2/file.c in the Linux kernel 2.6.30 before 2.6.30-rc3, 2.6.27 before 2.6.27.24, 2.6.29 before 2.6.29.4, and possibly other versions down to 2.6.19 allows local users to cause a denial of service (prevention of file creation and removal) via a series of splice system calls that trigger a deadlock between the generic_file_splice_write, splice_from_pipe, and ocfs2_file_splice_write functions. |
| CVE-2009-1914 | The pci_register_iommu_region function in arch/sparc/kernel/pci_common.c in the Linux kernel before 2.6.29 on the sparc64 platform allows local users to cause a denial of service (system crash) by reading the /proc/iomem file, related to uninitialized pointers and the request_resource function. |
| CVE-2009-1897 | The tun_chr_poll function in drivers/net/tun.c in the tun subsystem in the Linux kernel 2.6.30 and 2.6.30.1, when the -fno-delete-null-pointer-checks gcc option is omitted, allows local users to gain privileges via vectors involving a NULL pointer dereference and an mmap of /dev/net/tun, a different vulnerability than CVE-2009-1894. |
| CVE-2009-1895 | The personality subsystem in the Linux kernel before 2.6.31-rc3 has a PER_CLEAR_ON_SETID setting that does not clear the ADDR_COMPAT_LAYOUT and MMAP_PAGE_ZERO flags when executing a setuid or setgid program, which makes it easier for local users to leverage the details of memory usage to (1) conduct NULL pointer dereference attacks, (2) bypass the mmap_min_addr protection mechanism, or (3) defeat address space layout randomization (ASLR). |
| CVE-2009-1883 | The z90crypt_unlocked_ioctl function in the z90crypt driver in the Linux kernel 2.6.9 does not perform a capability check for the Z90QUIESCE operation, which allows local users to leverage euid 0 privileges to force a driver outage. |
| CVE-2009-1758 | The hypervisor_callback function in Xen, possibly before 3.4.0, as applied to the Linux kernel 2.6.30-rc4, 2.6.18, and probably other versions allows guest user applications to cause a denial of service (kernel oops) of the guest OS by triggering a segmentation fault in "certain address ranges." |
| CVE-2009-1633 | Multiple buffer overflows in the cifs subsystem in the Linux kernel before 2.6.29.4 allow remote CIFS servers to cause a denial of service (memory corruption) and possibly have unspecified other impact via (1) a malformed Unicode string, related to Unicode string area alignment in fs/cifs/sess.c; or (2) long Unicode characters, related to fs/cifs/cifssmb.c and the cifs_readdir function in fs/cifs/readdir.c. |
| CVE-2009-1630 | The nfs_permission function in fs/nfs/dir.c in the NFS client implementation in the Linux kernel 2.6.29.3 and earlier, when atomic_open is available, does not check execute (aka EXEC or MAY_EXEC) permission bits, which allows local users to bypass permissions and execute files, as demonstrated by files on an NFSv4 fileserver. |
| CVE-2009-1527 | Race condition in the ptrace_attach function in kernel/ptrace.c in the Linux kernel before 2.6.30-rc4 allows local users to gain privileges via a PTRACE_ATTACH ptrace call during an exec system call that is launching a setuid application, related to locking an incorrect cred_exec_mutex object. |
| CVE-2009-1439 | Buffer overflow in fs/cifs/connect.c in CIFS in the Linux kernel 2.6.29 and earlier allows remote attackers to cause a denial of service (crash) via a long nativeFileSystem field in a Tree Connect response to an SMB mount request. |
| CVE-2009-1389 | Buffer overflow in the RTL8169 NIC driver (drivers/net/r8169.c) in the Linux kernel before 2.6.30 allows remote attackers to cause a denial of service (kernel memory corruption and crash) via a long packet. |
| CVE-2009-1388 | The ptrace_start function in kernel/ptrace.c in the Linux kernel 2.6.18 does not properly handle simultaneous execution of the do_coredump function, which allows local users to cause a denial of service (deadlock) via vectors involving the ptrace system call and a coredumping thread. |
| CVE-2009-1385 | Integer underflow in the e1000_clean_rx_irq function in drivers/net/e1000/e1000_main.c in the e1000 driver in the Linux kernel before 2.6.30-rc8, the e1000e driver in the Linux kernel, and Intel Wired Ethernet (aka e1000) before 7.5.5 allows remote attackers to cause a denial of service (panic) via a crafted frame size. |
| CVE-2009-1360 | The __inet6_check_established function in net/ipv6/inet6_hashtables.c in the Linux kernel before 2.6.29, when Network Namespace Support (aka NET_NS) is enabled, allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) via vectors involving IPv6 packets. |
| CVE-2009-1338 | The kill_something_info function in kernel/signal.c in the Linux kernel before 2.6.28 does not consider PID namespaces when processing signals directed to PID -1, which allows local users to bypass the intended namespace isolation, and send arbitrary signals to all processes in all namespaces, via a kill command. |
| CVE-2009-1337 | The exit_notify function in kernel/exit.c in the Linux kernel before 2.6.30-rc1 does not restrict exit signals when the CAP_KILL capability is held, which allows local users to send an arbitrary signal to a process by running a program that modifies the exit_signal field and then uses an exec system call to launch a setuid application. |
| CVE-2009-1336 | fs/nfs/client.c in the Linux kernel before 2.6.23 does not properly initialize a certain structure member that stores the maximum NFS filename length, which allows local users to cause a denial of service (OOPS) via a long filename, related to the encode_lookup function. |
| CVE-2009-1298 | The ip_frag_reasm function in net/ipv4/ip_fragment.c in the Linux kernel 2.6.32-rc8, and 2.6.29 and later versions before 2.6.32, calls IP_INC_STATS_BH with an incorrect argument, which allows remote attackers to cause a denial of service (NULL pointer dereference and hang) via long IP packets, possibly related to the ip_defrag function. |
| CVE-2009-1265 | Integer overflow in rose_sendmsg (sys/net/af_rose.c) in the Linux kernel 2.6.24.4, and other versions before 2.6.30-rc1, might allow remote attackers to obtain sensitive information via a large length value, which causes "garbage" memory to be sent. |
| CVE-2009-1243 | net/ipv4/udp.c in the Linux kernel before 2.6.29.1 performs an unlocking step in certain incorrect circumstances, which allows local users to cause a denial of service (panic) by reading zero bytes from the /proc/net/udp file and unspecified other files, related to the "udp seq_file infrastructure." |
| CVE-2009-1242 | The vmx_set_msr function in arch/x86/kvm/vmx.c in the VMX implementation in the KVM subsystem in the Linux kernel before 2.6.29.1 on the i386 platform allows guest OS users to cause a denial of service (OOPS) by setting the EFER_LME (aka "Long mode enable") bit in the Extended Feature Enable Register (EFER) model-specific register, which is specific to the x86_64 platform. |
| CVE-2009-1192 | The (1) agp_generic_alloc_page and (2) agp_generic_alloc_pages functions in drivers/char/agp/generic.c in the agp subsystem in the Linux kernel before 2.6.30-rc3 do not zero out pages that may later be available to a user-space process, which allows local users to obtain sensitive information by reading these pages. |
| CVE-2009-1184 | The selinux_ip_postroute_iptables_compat function in security/selinux/hooks.c in the SELinux subsystem in the Linux kernel before 2.6.27.22, and 2.6.28.x before 2.6.28.10, when compat_net is enabled, omits calls to avc_has_perm for the (1) node and (2) port, which allows local users to bypass intended restrictions on network traffic. NOTE: this was incorrectly reported as an issue fixed in 2.6.27.21. |
| CVE-2009-1072 | nfsd in the Linux kernel before 2.6.28.9 does not drop the CAP_MKNOD capability before handling a user request in a thread, which allows local users to create device nodes, as demonstrated on a filesystem that has been exported with the root_squash option. |
| CVE-2009-1046 | The console selection feature in the Linux kernel 2.6.28 before 2.6.28.4, 2.6.25, and possibly earlier versions, when the UTF-8 console is used, allows physically proximate attackers to cause a denial of service (memory corruption) by selecting a small number of 3-byte UTF-8 characters, which triggers an "off-by-two memory error." NOTE: it is not clear whether this issue crosses privilege boundaries. |
| CVE-2009-0935 | The inotify_read function in the Linux kernel 2.6.27 to 2.6.27.13, 2.6.28 to 2.6.28.2, and 2.6.29-rc3 allows local users to cause a denial of service (OOPS) via a read with an invalid address to an inotify instance, which causes the device's event list mutex to be unlocked twice and prevents proper synchronization of a data structure for the inotify instance. |
| CVE-2009-0859 | The shm_get_stat function in ipc/shm.c in the shm subsystem in the Linux kernel before 2.6.28.5, when CONFIG_SHMEM is disabled, misinterprets the data type of an inode, which allows local users to cause a denial of service (system hang) via an SHM_INFO shmctl call, as demonstrated by running the ipcs program. |
| CVE-2009-0835 | The __secure_computing function in kernel/seccomp.c in the seccomp subsystem in the Linux kernel 2.6.28.7 and earlier on the x86_64 platform, when CONFIG_SECCOMP is enabled, does not properly handle (1) a 32-bit process making a 64-bit syscall or (2) a 64-bit process making a 32-bit syscall, which allows local users to bypass intended access restrictions via crafted syscalls that are misinterpreted as (a) stat or (b) chmod, a related issue to CVE-2009-0342 and CVE-2009-0343. |
| CVE-2009-0834 | The audit_syscall_entry function in the Linux kernel 2.6.28.7 and earlier on the x86_64 platform does not properly handle (1) a 32-bit process making a 64-bit syscall or (2) a 64-bit process making a 32-bit syscall, which allows local users to bypass certain syscall audit configurations via crafted syscalls, a related issue to CVE-2009-0342 and CVE-2009-0343. |
| CVE-2009-0787 | The ecryptfs_write_metadata_to_contents function in the eCryptfs functionality in the Linux kernel 2.6.28 before 2.6.28.9 uses an incorrect size when writing kernel memory to an eCryptfs file header, which triggers an out-of-bounds read and allows local users to obtain portions of kernel memory. |
| CVE-2009-0778 | The icmp_send function in net/ipv4/icmp.c in the Linux kernel before 2.6.25, when configured as a router with a REJECT route, does not properly manage the Protocol Independent Destination Cache (aka DST) in some situations involving transmission of an ICMP Host Unreachable message, which allows remote attackers to cause a denial of service (connectivity outage) by sending a large series of packets to many destination IP addresses within this REJECT route, related to an "rt_cache leak." |
| CVE-2009-0748 | The ext4_fill_super function in fs/ext4/super.c in the Linux kernel 2.6.27 before 2.6.27.19 and 2.6.28 before 2.6.28.7 does not validate the superblock configuration, which allows local users to cause a denial of service (NULL pointer dereference and OOPS) by attempting to mount a crafted ext4 filesystem. |
| CVE-2009-0747 | The ext4_isize function in fs/ext4/ext4.h in the Linux kernel 2.6.27 before 2.6.27.19 and 2.6.28 before 2.6.28.7 uses the i_size_high structure member during operations on arbitrary types of files, which allows local users to cause a denial of service (CPU consumption and error-message flood) by attempting to mount a crafted ext4 filesystem. |
| CVE-2009-0746 | The make_indexed_dir function in fs/ext4/namei.c in the Linux kernel 2.6.27 before 2.6.27.19 and 2.6.28 before 2.6.28.7 does not validate a certain rec_len field, which allows local users to cause a denial of service (OOPS) by attempting to mount a crafted ext4 filesystem. |
| CVE-2009-0745 | The ext4_group_add function in fs/ext4/resize.c in the Linux kernel 2.6.27 before 2.6.27.19 and 2.6.28 before 2.6.28.7 does not properly initialize the group descriptor during a resize (aka resize2fs) operation, which might allow local users to cause a denial of service (OOPS) by arranging for crafted values to be present in available memory. |
| CVE-2009-0676 | The sock_getsockopt function in net/core/sock.c in the Linux kernel before 2.6.28.6 does not initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel memory via an SO_BSDCOMPAT getsockopt request. |
| CVE-2009-0675 | The skfp_ioctl function in drivers/net/skfp/skfddi.c in the Linux kernel before 2.6.28.6 permits SKFP_CLR_STATS requests only when the CAP_NET_ADMIN capability is absent, instead of when this capability is present, which allows local users to reset the driver statistics, related to an "inverted logic" issue. |
| CVE-2009-0605 | Stack consumption vulnerability in the do_page_fault function in arch/x86/mm/fault.c in the Linux kernel before 2.6.28.5 allows local users to cause a denial of service (memory corruption) or possibly gain privileges via unspecified vectors that trigger page faults on a machine that has a registered Kprobes probe. |
| CVE-2009-0322 | drivers/firmware/dell_rbu.c in the Linux kernel before 2.6.27.13, and 2.6.28.x before 2.6.28.2, allows local users to cause a denial of service (system crash) via a read system call that specifies zero bytes from the (1) image_type or (2) packet_size file in /sys/devices/platform/dell_rbu/. |
| CVE-2009-0269 | fs/ecryptfs/inode.c in the eCryptfs subsystem in the Linux kernel before 2.6.28.1 allows local users to cause a denial of service (fault or memory corruption), or possibly have unspecified other impact, via a readlink call that results in an error, leading to use of a -1 return value as an array index. |
| CVE-2009-0065 | Buffer overflow in net/sctp/sm_statefuns.c in the Stream Control Transmission Protocol (sctp) implementation in the Linux kernel before 2.6.28-git8 allows remote attackers to have an unknown impact via an FWD-TSN (aka FORWARD-TSN) chunk with a large stream ID. |
| CVE-2009-0031 | Memory leak in the keyctl_join_session_keyring function (security/keys/keyctl.c) in Linux kernel 2.6.29-rc2 and earlier allows local users to cause a denial of service (kernel memory consumption) via unknown vectors related to a "missing kfree." |
| CVE-2009-0029 | The ABI in the Linux kernel 2.6.28 and earlier on s390, powerpc, sparc64, and mips 64-bit platforms requires that a 32-bit argument in a 64-bit register was properly sign extended when sent from a user-mode application, but cannot verify this, which allows local users to cause a denial of service (crash) or possibly gain privileges via a crafted system call. |
| CVE-2009-0028 | The clone system call in the Linux kernel 2.6.28 and earlier allows local users to send arbitrary signals to a parent process from an unprivileged child process by launching an additional child process with the CLONE_PARENT flag, and then letting this new process exit. |
| CVE-2009-0024 | The sys_remap_file_pages function in mm/fremap.c in the Linux kernel before 2.6.24.1 allows local users to cause a denial of service or gain privileges via unspecified vectors, related to the vm_file structure member, and the mmap_region and do_munmap functions. |
| CVE-2008-7316 | mm/filemap.c in the Linux kernel before 2.6.25 allows local users to cause a denial of service (infinite loop) via a writev system call that triggers an iovec of zero length, followed by a page fault for an iovec of nonzero length. |
| CVE-2008-7256 | mm/shmem.c in the Linux kernel before 2.6.28-rc8, when strict overcommit is enabled and CONFIG_SECURITY is disabled, does not properly handle the export of shmemfs objects by knfsd, which allows attackers to cause a denial of service (NULL pointer dereference and knfsd crash) or possibly have unspecified other impact via unknown vectors. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-1643. |
| CVE-2008-6107 | The (1) sys32_mremap function in arch/sparc64/kernel/sys_sparc32.c, the (2) sparc_mmap_check function in arch/sparc/kernel/sys_sparc.c, and the (3) sparc64_mmap_check function in arch/sparc64/kernel/sys_sparc.c, in the Linux kernel before 2.6.25.4, omit some virtual-address range (aka span) checks when the mremap MREMAP_FIXED bit is not set, which allows local users to cause a denial of service (panic) via unspecified mremap calls, a related issue to CVE-2008-2137. |
| CVE-2008-5713 | The __qdisc_run function in net/sched/sch_generic.c in the Linux kernel before 2.6.25 on SMP machines allows local users to cause a denial of service (soft lockup) by sending a large amount of network traffic, as demonstrated by multiple simultaneous invocations of the Netperf benchmark application in UDP_STREAM mode. |
| CVE-2008-5702 | Buffer underflow in the ibwdt_ioctl function in drivers/watchdog/ib700wdt.c in the Linux kernel before 2.6.28-rc1 might allow local users to have an unknown impact via a certain /dev/watchdog WDIOC_SETTIMEOUT IOCTL call. |
| CVE-2008-5701 | Array index error in arch/mips/kernel/scall64-o32.S in the Linux kernel before 2.6.28-rc8 on 64-bit MIPS platforms allows local users to cause a denial of service (system crash) via an o32 syscall with a small syscall number, which leads to an attempted read operation outside the bounds of the syscall table. |
| CVE-2008-5700 | libata in the Linux kernel before 2.6.27.9 does not set minimum timeouts for SG_IO requests, which allows local users to cause a denial of service (Programmed I/O mode on drives) via multiple simultaneous invocations of an unspecified test program. |
| CVE-2008-5395 | The parisc_show_stack function in arch/parisc/kernel/traps.c in the Linux kernel before 2.6.28-rc7 on PA-RISC allows local users to cause a denial of service (system crash) via vectors associated with an attempt to unwind a stack that contains userspace addresses. |
| CVE-2008-5300 | Linux kernel 2.6.28 allows local users to cause a denial of service ("soft lockup" and process loss) via a large number of sendmsg function calls, which does not block during AF_UNIX garbage collection and triggers an OOM condition, a different vulnerability than CVE-2008-5029. |
| CVE-2008-5182 | The inotify functionality in Linux kernel 2.6 before 2.6.28-rc5 might allow local users to gain privileges via unknown vectors related to race conditions in inotify watch removal and umount. |
| CVE-2008-5134 | Buffer overflow in the lbs_process_bss function in drivers/net/wireless/libertas/scan.c in the libertas subsystem in the Linux kernel before 2.6.27.5 allows remote attackers to have an unknown impact via an "invalid beacon/probe response." |
| CVE-2008-5079 | net/atm/svc.c in the ATM subsystem in the Linux kernel 2.6.27.8 and earlier allows local users to cause a denial of service (kernel infinite loop) by making two calls to svc_listen for the same socket, and then reading a /proc/net/atm/*vc file, related to corruption of the vcc table. |
| CVE-2008-5033 | The chip_command function in drivers/media/video/tvaudio.c in the Linux kernel 2.6.25.x before 2.6.25.19, 2.6.26.x before 2.6.26.7, and 2.6.27.x before 2.6.27.3 allows attackers to cause a denial of service (NULL function pointer dereference and OOPS) via unknown vectors. |
| CVE-2008-5029 | The __scm_destroy function in net/core/scm.c in the Linux kernel 2.6.27.4, 2.6.26, and earlier makes indirect recursive calls to itself through calls to the fput function, which allows local users to cause a denial of service (panic) via vectors related to sending an SCM_RIGHTS message through a UNIX domain socket and closing file descriptors. |
| CVE-2008-5025 | Stack-based buffer overflow in the hfs_cat_find_brec function in fs/hfs/catalog.c in the Linux kernel before 2.6.28-rc1 allows attackers to cause a denial of service (memory corruption or system crash) via an hfs filesystem image with an invalid catalog namelength field, a related issue to CVE-2008-4933. |
| CVE-2008-4934 | The hfsplus_block_allocate function in fs/hfsplus/bitmap.c in the Linux kernel before 2.6.28-rc1 does not check a certain return value from the read_mapping_page function before calling kmap, which allows attackers to cause a denial of service (system crash) via a crafted hfsplus filesystem image. |
| CVE-2008-4933 | Buffer overflow in the hfsplus_find_cat function in fs/hfsplus/catalog.c in the Linux kernel before 2.6.28-rc1 allows attackers to cause a denial of service (memory corruption or system crash) via an hfsplus filesystem image with an invalid catalog namelength field, related to the hfsplus_cat_build_key_uni function. |
| CVE-2008-4618 | The Stream Control Transmission Protocol (sctp) implementation in the Linux kernel before 2.6.27 does not properly handle a protocol violation in which a parameter has an invalid length, which allows attackers to cause a denial of service (panic) via unspecified vectors, related to sctp_sf_violation_paramlen, sctp_sf_abort_violation, sctp_make_abort_violation, and incorrect data types in function calls. |
| CVE-2008-4576 | sctp in Linux kernel before 2.6.25.18 allows remote attackers to cause a denial of service (OOPS) via an INIT-ACK that states the peer does not support AUTH, which causes the sctp_process_init function to clean up active transports and triggers the OOPS when the T1-Init timer expires. |
| CVE-2008-4554 | The do_splice_from function in fs/splice.c in the Linux kernel before 2.6.27 does not reject file descriptors that have the O_APPEND flag set, which allows local users to bypass append mode and make arbitrary changes to other locations in the file. |
| CVE-2008-4445 | The sctp_auth_ep_set_hmacs function in net/sctp/auth.c in the Stream Control Transmission Protocol (sctp) implementation in the Linux kernel before 2.6.26.4, when the SCTP-AUTH extension is enabled, does not verify that the identifier index is within the bounds established by SCTP_AUTH_HMAC_ID_MAX, which allows local users to obtain sensitive information via a crafted SCTP_HMAC_IDENT IOCTL request involving the sctp_getsockopt function, a different vulnerability than CVE-2008-4113. |
| CVE-2008-4410 | The vmi_write_ldt_entry function in arch/x86/kernel/vmi_32.c in the Virtual Machine Interface (VMI) in the Linux kernel 2.6.26.5 invokes write_idt_entry where write_ldt_entry was intended, which allows local users to cause a denial of service (persistent application failure) via crafted function calls, related to the Java Runtime Environment (JRE) experiencing improper LDT selector state, a different vulnerability than CVE-2008-3247. |
| CVE-2008-4395 | Multiple buffer overflows in the ndiswrapper module 1.53 for the Linux kernel 2.6 allow remote attackers to execute arbitrary code by sending packets over a local wireless network that specify long ESSIDs. |
| CVE-2008-4307 | Race condition in the do_setlk function in fs/nfs/file.c in the Linux kernel before 2.6.26 allows local users to cause a denial of service (crash) via vectors resulting in an interrupted RPC call that leads to a stray FL_POSIX lock, related to improper handling of a race between fcntl and close in the EINTR case. |
| CVE-2008-4302 | fs/splice.c in the splice subsystem in the Linux kernel before 2.6.22.2 does not properly handle a failure of the add_to_page_cache_lru function, and subsequently attempts to unlock a page that was not locked, which allows local users to cause a denial of service (kernel BUG and system crash), as demonstrated by the fio I/O tool. |
| CVE-2008-4210 | fs/open.c in the Linux kernel before 2.6.22 does not properly strip setuid and setgid bits when there is a write to a file, which allows local users to gain the privileges of a different group, and obtain sensitive information or possibly have unspecified other impact, by creating an executable file in a setgid directory through the (1) truncate or (2) ftruncate function in conjunction with memory-mapped I/O. |
| CVE-2008-4113 | The sctp_getsockopt_hmac_ident function in net/sctp/socket.c in the Stream Control Transmission Protocol (sctp) implementation in the Linux kernel before 2.6.26.4, when the SCTP-AUTH extension is enabled, relies on an untrusted length value to limit copying of data from kernel memory, which allows local users to obtain sensitive information via a crafted SCTP_HMAC_IDENT IOCTL request involving the sctp_getsockopt function. |
| CVE-2008-3915 | Buffer overflow in nfsd in the Linux kernel before 2.6.26.4, when NFSv4 is enabled, allows remote attackers to have an unknown impact via vectors related to decoding an NFSv4 acl. |
| CVE-2008-3911 | The proc_do_xprt function in net/sunrpc/sysctl.c in the Linux kernel 2.6.26.3 does not check the length of a certain buffer obtained from userspace, which allows local users to overflow a stack-based buffer and have unspecified other impact via a crafted read system call for the /proc/sys/sunrpc/transports file. |
| CVE-2008-3901 | Software suspend 2 2-2.2.1, when used with the Linux kernel 2.6.16, stores pre-boot authentication passwords in the BIOS Keyboard buffer and does not clear this buffer after use, which allows local users to obtain sensitive information by reading the physical memory locations associated with this buffer. |
| CVE-2008-3889 | Postfix 2.4 before 2.4.9, 2.5 before 2.5.5, and 2.6 before 2.6-20080902, when used with the Linux 2.6 kernel, leaks epoll file descriptors during execution of "non-Postfix" commands, which allows local users to cause a denial of service (application slowdown or exit) via a crafted command, as demonstrated by a command in a .forward file. |
| CVE-2008-3833 | The generic_file_splice_write function in fs/splice.c in the Linux kernel before 2.6.19 does not properly strip setuid and setgid bits when there is a write to a file, which allows local users to gain the privileges of a different group, and obtain sensitive information or possibly have unspecified other impact, by splicing into an inode in order to create an executable file in a setgid directory, a different vulnerability than CVE-2008-4210. |
| CVE-2008-3832 | A certain Fedora patch for the utrace subsystem in the Linux kernel before 2.6.26.5-28 on Fedora 8, and before 2.6.26.5-45 on Fedora 9, allows local users to cause a denial of service (NULL pointer dereference and system crash or hang) via a call to the utrace_control function. |
| CVE-2008-3831 | The i915 driver in (1) drivers/char/drm/i915_dma.c in the Linux kernel 2.6.24 on Debian GNU/Linux and (2) sys/dev/pci/drm/i915_drv.c in OpenBSD does not restrict the DRM_I915_HWS_ADDR ioctl to the Direct Rendering Manager (DRM) master, which allows local users to cause a denial of service (memory corruption) via a crafted ioctl call, related to absence of the DRM_MASTER and DRM_ROOT_ONLY flags in the ioctl's configuration. |
| CVE-2008-3792 | net/sctp/socket.c in the Stream Control Transmission Protocol (sctp) implementation in the Linux kernel before 2.6.26.4 does not verify that the SCTP-AUTH extension is enabled before proceeding with SCTP-AUTH API functions, which allows attackers to cause a denial of service (NULL pointer dereference and panic) via vectors that result in calls to (1) sctp_setsockopt_auth_chunk, (2) sctp_setsockopt_hmac_ident, (3) sctp_setsockopt_auth_key, (4) sctp_setsockopt_active_key, (5) sctp_setsockopt_del_key, (6) sctp_getsockopt_maxburst, (7) sctp_getsockopt_active_key, (8) sctp_getsockopt_peer_auth_chunks, or (9) sctp_getsockopt_local_auth_chunks. |
| CVE-2008-3686 | The rt6_fill_node function in net/ipv6/route.c in Linux kernel 2.6.26-rc4, 2.6.26.2, and possibly other 2.6.26 versions, allows local users to cause a denial of service (kernel OOPS) via IPv6 requests when no IPv6 input device is in use, which triggers a NULL pointer dereference. |
| CVE-2008-3535 | Off-by-one error in the iov_iter_advance function in mm/filemap.c in the Linux kernel before 2.6.27-rc2 allows local users to cause a denial of service (system crash) via a certain sequence of file I/O operations with readv and writev, as demonstrated by testcases/kernel/fs/ftest/ftest03 from the Linux Test Project. |
| CVE-2008-3534 | The shmem_delete_inode function in mm/shmem.c in the tmpfs implementation in the Linux kernel before 2.6.26.1 allows local users to cause a denial of service (system crash) via a certain sequence of file create, remove, and overwrite operations, as demonstrated by the insserv program, related to allocation of "useless pages" and improper maintenance of the i_blocks count. |
| CVE-2008-3528 | The error-reporting functionality in (1) fs/ext2/dir.c, (2) fs/ext3/dir.c, and possibly (3) fs/ext4/dir.c in the Linux kernel 2.6.26.5 does not limit the number of printk console messages that report directory corruption, which allows physically proximate attackers to cause a denial of service (temporary system hang) by mounting a filesystem that has corrupted dir->i_size and dir->i_blocks values and performing (a) read or (b) write operations. NOTE: there are limited scenarios in which this crosses privilege boundaries. |
| CVE-2008-3527 | arch/i386/kernel/sysenter.c in the Virtual Dynamic Shared Objects (vDSO) implementation in the Linux kernel before 2.6.21 does not properly check boundaries, which allows local users to gain privileges or cause a denial of service via unspecified vectors, related to the install_special_mapping, syscall, and syscall32_nopage functions. |
| CVE-2008-3526 | Integer overflow in the sctp_setsockopt_auth_key function in net/sctp/socket.c in the Stream Control Transmission Protocol (sctp) implementation in the Linux kernel 2.6.24-rc1 through 2.6.26.3 allows remote attackers to cause a denial of service (panic) or possibly have unspecified other impact via a crafted sca_keylength field associated with the SCTP_AUTH_KEY option. |
| CVE-2008-3525 | The sbni_ioctl function in drivers/net/wan/sbni.c in the wan subsystem in the Linux kernel 2.6.26.3 does not check for the CAP_NET_ADMIN capability before processing a (1) SIOCDEVRESINSTATS, (2) SIOCDEVSHWSTATE, (3) SIOCDEVENSLAVE, or (4) SIOCDEVEMANSIPATE ioctl request, which allows local users to bypass intended capability restrictions. |
| CVE-2008-3496 | Buffer overflow in format descriptor parsing in the uvc_parse_format function in drivers/media/video/uvc/uvc_driver.c in uvcvideo in the video4linux (V4L) implementation in the Linux kernel before 2.6.26.1 has unknown impact and attack vectors. |
| CVE-2008-3276 | Integer overflow in the dccp_setsockopt_change function in net/dccp/proto.c in the Datagram Congestion Control Protocol (DCCP) subsystem in the Linux kernel 2.6.17-rc1 through 2.6.26.2 allows remote attackers to cause a denial of service (panic) via a crafted integer value, related to Change L and Change R options without at least one byte in the dccpsf_val field. |
| CVE-2008-3275 | The (1) real_lookup and (2) __lookup_hash functions in fs/namei.c in the vfs implementation in the Linux kernel before 2.6.25.15 do not prevent creation of a child dentry for a deleted (aka S_DEAD) directory, which allows local users to cause a denial of service ("overflow" of the UBIFS orphan area) via a series of attempted file creations within deleted directories. |
| CVE-2008-3272 | The snd_seq_oss_synth_make_info function in sound/core/seq/oss/seq_oss_synth.c in the sound subsystem in the Linux kernel before 2.6.27-rc2 does not verify that the device number is within the range defined by max_synthdev before returning certain data to the caller, which allows local users to obtain sensitive information. |
| CVE-2008-3247 | The LDT implementation in the Linux kernel 2.6.25.x before 2.6.25.11 on x86_64 platforms uses an incorrect size for ldt_desc, which allows local users to cause a denial of service (system crash) or possibly gain privileges via unspecified vectors. |
| CVE-2008-3077 | arch/x86/kernel/ptrace.c in the Linux kernel before 2.6.25.10 on the x86_64 platform leaks task_struct references into the sys32_ptrace function, which allows local users to cause a denial of service (system crash) or have unspecified other impact via unknown vectors, possibly a use-after-free vulnerability. |
| CVE-2008-2944 | Double free vulnerability in the utrace support in the Linux kernel, probably 2.6.18, in Red Hat Enterprise Linux (RHEL) 5 and Fedora Core 6 (FC6) allows local users to cause a denial of service (oops), as demonstrated by a crash when running the GNU GDB testsuite, a different vulnerability than CVE-2008-2365. |
| CVE-2008-2931 | The do_change_type function in fs/namespace.c in the Linux kernel before 2.6.22 does not verify that the caller has the CAP_SYS_ADMIN capability, which allows local users to gain privileges or cause a denial of service by modifying the properties of a mountpoint. |
| CVE-2008-2826 | Integer overflow in the sctp_getsockopt_local_addrs_old function in net/sctp/socket.c in the Stream Control Transmission Protocol (sctp) functionality in the Linux kernel before 2.6.25.9 allows local users to cause a denial of service (resource consumption and system outage) via vectors involving a large addr_num field in an sctp_getaddrs_old data structure. |
| CVE-2008-2812 | The Linux kernel before 2.6.25.10 does not properly perform tty operations, which allows local users to cause a denial of service (system crash) or possibly gain privileges via vectors involving NULL pointer dereference of function pointers in (1) hamradio/6pack.c, (2) hamradio/mkiss.c, (3) irda/irtty-sir.c, (4) ppp_async.c, (5) ppp_synctty.c, (6) slip.c, (7) wan/x25_asy.c, and (8) wireless/strip.c in drivers/net/. |
| CVE-2008-2750 | The pppol2tp_recvmsg function in drivers/net/pppol2tp.c in the Linux kernel 2.6 before 2.6.26-rc6 allows remote attackers to cause a denial of service (kernel heap memory corruption and system crash) and possibly have unspecified other impact via a crafted PPPOL2TP packet that results in a large value for a certain length variable. |
| CVE-2008-2729 | arch/x86_64/lib/copy_user.S in the Linux kernel before 2.6.19 on some AMD64 systems does not erase destination memory locations after an exception during kernel memory copy, which allows local users to obtain sensitive information. |
| CVE-2008-2372 | The Linux kernel 2.6.24 and 2.6.25 before 2.6.25.9 allows local users to cause a denial of service (memory consumption) via a large number of calls to the get_user_pages function, which lacks a ZERO_PAGE optimization and results in allocation of "useless newly zeroed pages." |
| CVE-2008-2365 | Race condition in the ptrace and utrace support in the Linux kernel 2.6.9 through 2.6.25, as used in Red Hat Enterprise Linux (RHEL) 4, allows local users to cause a denial of service (oops) via a long series of PTRACE_ATTACH ptrace calls to another user's process that trigger a conflict between utrace_detach and report_quiescent, related to "late ptrace_may_attach() check" and "race around &dead_engine_ops setting," a different vulnerability than CVE-2007-0771 and CVE-2008-1514. NOTE: this issue might only affect kernel versions before 2.6.16.x. |
| CVE-2008-2358 | Integer overflow in the dccp_feat_change function in net/dccp/feat.c in the Datagram Congestion Control Protocol (DCCP) subsystem in the Linux kernel 2.6.18, and 2.6.17 through 2.6.20, allows local users to gain privileges via an invalid feature length, which leads to a heap-based buffer overflow. |
| CVE-2008-2148 | The utimensat system call (sys_utimensat) in Linux kernel 2.6.22 and other versions before 2.6.25.3 does not check file permissions when certain UTIME_NOW and UTIME_OMIT combinations are used, which allows local users to modify file times of arbitrary files, possibly leading to a denial of service. |
| CVE-2008-2137 | The (1) sparc_mmap_check function in arch/sparc/kernel/sys_sparc.c and the (2) sparc64_mmap_check function in arch/sparc64/kernel/sys_sparc.c, in the Linux kernel 2.4 before 2.4.36.5 and 2.6 before 2.6.25.3, omit some virtual-address range (aka span) checks when the mmap MAP_FIXED bit is not set, which allows local users to cause a denial of service (panic) via unspecified mmap calls. |
| CVE-2008-2136 | Memory leak in the ipip6_rcv function in net/ipv6/sit.c in the Linux kernel 2.4 before 2.4.36.5 and 2.6 before 2.6.25.3 allows remote attackers to cause a denial of service (memory consumption) via network traffic to a Simple Internet Transition (SIT) tunnel interface, related to the pskb_may_pull and kfree_skb functions, and management of an skb reference count. |
| CVE-2008-1675 | The bdx_ioctl_priv function in the tehuti driver (tehuti.c) in Linux kernel 2.6.x before 2.6.25.1 does not properly check certain information related to register size, which has unspecified impact and local attack vectors, probably related to reading or writing kernel memory. |
| CVE-2008-1673 | The asn1 implementation in (a) the Linux kernel 2.4 before 2.4.36.6 and 2.6 before 2.6.25.5, as used in the cifs and ip_nat_snmp_basic modules; and (b) the gxsnmp package; does not properly validate length values during decoding of ASN.1 BER data, which allows remote attackers to cause a denial of service (crash) or execute arbitrary code via (1) a length greater than the working buffer, which can lead to an unspecified overflow; (2) an oid length of zero, which can lead to an off-by-one error; or (3) an indefinite length for a primitive encoding. |
| CVE-2008-1669 | Linux kernel before 2.6.25.2 does not apply a certain protection mechanism for fcntl functionality, which allows local users to (1) execute code in parallel or (2) exploit a race condition to obtain "re-ordered access to the descriptor table." |
| CVE-2008-1615 | Linux kernel 2.6.18, and possibly other versions, when running on AMD64 architectures, allows local users to cause a denial of service (crash) via certain ptrace calls. |
| CVE-2008-1514 | arch/s390/kernel/ptrace.c in Linux kernel 2.6.9, and other versions before 2.6.27-rc6, on s390 platforms allows local users to cause a denial of service (kernel panic) via the user-area-padding test from the ptrace testsuite in 31-bit mode, which triggers an invalid dereference. |
| CVE-2008-1375 | Race condition in the directory notification subsystem (dnotify) in Linux kernel 2.6.x before 2.6.24.6, and 2.6.25 before 2.6.25.1, allows local users to cause a denial of service (OOPS) and possibly gain privileges via unspecified vectors. |
| CVE-2008-1367 | gcc 4.3.x does not generate a cld instruction while compiling functions used for string manipulation such as memcpy and memmove on x86 and i386, which can prevent the direction flag (DF) from being reset in violation of ABI conventions and cause data to be copied in the wrong direction during signal handling in the Linux kernel, which might allow context-dependent attackers to trigger memory corruption. NOTE: this issue was originally reported for CPU consumption in SBCL. |
| CVE-2008-1294 | Linux kernel 2.6.17, and other versions before 2.6.22, does not check when a user attempts to set RLIMIT_CPU to 0 until after the change is made, which allows local users to bypass intended resource limits. |
| CVE-2008-0731 | The Linux kernel before 2.6.18.8-0.8 in SUSE openSUSE 10.2 does not properly handle failure of an AppArmor change_hat system call, which might allow attackers to trigger the unconfining of an apparmored task. |
| CVE-2008-0600 | The vmsplice_to_pipe function in Linux kernel 2.6.17 through 2.6.24.1 does not validate a certain userspace pointer before dereference, which allows local users to gain root privileges via crafted arguments in a vmsplice system call, a different vulnerability than CVE-2008-0009 and CVE-2008-0010. |
| CVE-2008-0598 | Unspecified vulnerability in the 32-bit and 64-bit emulation in the Linux kernel 2.6.9, 2.6.18, and probably other versions allows local users to read uninitialized memory via unknown vectors involving a crafted binary. |
| CVE-2008-0352 | The Linux kernel 2.6.20 through 2.6.21.1 allows remote attackers to cause a denial of service (panic) via a certain IPv6 packet, possibly involving the Jumbo Payload hop-by-hop option (jumbogram). |
| CVE-2008-0163 | Linux kernel 2.6, when using vservers, allows local users to access resources of other vservers via a symlink attack in /proc. |
| CVE-2008-0010 | The copy_from_user_mmap_sem function in fs/splice.c in the Linux kernel 2.6.22 through 2.6.24 does not validate a certain userspace pointer before dereference, which allow local users to read from arbitrary kernel memory locations. |
| CVE-2008-0009 | The vmsplice_to_user function in fs/splice.c in the Linux kernel 2.6.22 through 2.6.24 does not validate a certain userspace pointer before dereference, which might allow local users to access arbitrary kernel memory locations. |
| CVE-2008-0007 | Linux kernel before 2.6.22.17, when using certain drivers that register a fault handler that does not perform range checks, allows local users to access kernel memory via an out-of-range offset. |
| CVE-2008-0001 | VFS in the Linux kernel before 2.6.22.16, and 2.6.23.x before 2.6.23.14, performs tests of access mode by using the flag variable instead of the acc_mode variable, which might allow local users to bypass intended permissions and remove directories. |
| CVE-2007-6762 | In the Linux kernel before 2.6.20, there is an off-by-one bug in net/netlabel/netlabel_cipso_v4.c where it is possible to overflow the doi_def->tags[] array. |
| CVE-2007-6761 | drivers/media/video/videobuf-vmalloc.c in the Linux kernel before 2.6.24 does not initialize videobuf_mapping data structures, which allows local users to trigger an incorrect count value and videobuf leak via unspecified vectors, a different vulnerability than CVE-2010-5321. |
| CVE-2007-6733 | The nfs_lock function in fs/nfs/file.c in the Linux kernel 2.6.9 does not properly remove POSIX locks on files that are setgid without group-execute permission, which allows local users to cause a denial of service (BUG and system crash) by locking a file on an NFS filesystem and then changing this file's permissions, a related issue to CVE-2010-0727. |
| CVE-2007-6716 | fs/direct-io.c in the dio subsystem in the Linux kernel before 2.6.23 does not properly zero out the dio struct, which allows local users to cause a denial of service (OOPS), as demonstrated by a certain fio test. |
| CVE-2007-6712 | Integer overflow in the hrtimer_forward function (hrtimer.c) in Linux kernel 2.6.21-rc4, when running on 64-bit systems, allows local users to cause a denial of service (infinite loop) via a timer with a large expiry value, which causes the timer to always be expired. |
| CVE-2007-6694 | The chrp_show_cpuinfo function (chrp/setup.c) in Linux kernel 2.4.21 through 2.6.18-53, when running on PowerPC, might allow local users to cause a denial of service (crash) via unknown vectors that cause the of_get_property function to fail, which triggers a NULL pointer dereference. |
| CVE-2007-6434 | Linux kernel 2.6.23 allows local users to create low pages in virtual userspace memory and bypass mmap_min_addr protection via a crafted executable file that calls the do_brk function. |
| CVE-2007-6417 | The shmem_getpage function (mm/shmem.c) in Linux kernel 2.6.11 through 2.6.23 does not properly clear allocated memory in some rare circumstances related to tmpfs, which might allow local users to read sensitive kernel data or cause a denial of service (crash). |
| CVE-2007-6282 | The IPsec implementation in Linux kernel before 2.6.25 allows remote routers to cause a denial of service (crash) via a fragmented ESP packet in which the first fragment does not contain the entire ESP header and IV. |
| CVE-2007-6206 | The do_coredump function in fs/exec.c in Linux kernel 2.4.x and 2.6.x up to 2.6.24-rc3, and possibly other versions, does not change the UID of a core dump file if it exists before a root process creates a core dump in the same location, which might allow local users to obtain sensitive information. |
| CVE-2007-6151 | The isdn_ioctl function in isdn_common.c in Linux kernel 2.6.23 allows local users to cause a denial of service via a crafted ioctl struct in which iocts is not null terminated, which triggers a buffer overflow. |
| CVE-2007-6063 | Buffer overflow in the isdn_net_setcfg function in isdn_net.c in Linux kernel 2.6.23 allows local users to have an unknown impact via a crafted argument to the isdn_ioctl function. |
| CVE-2007-5966 | Integer overflow in the hrtimer_start function in kernel/hrtimer.c in the Linux kernel before 2.6.23.10 allows local users to execute arbitrary code or cause a denial of service (panic) via a large relative timeout value. NOTE: some of these details are obtained from third party information. |
| CVE-2007-5908 | ** REJECT ** Buffer overflow in the (1) sysfs_show_available_clocksources and (2) sysfs_show_current_clocksources functions in Linux kernel 2.6.23 and earlier might allow local users to cause a denial of service or execute arbitrary code via crafted clock source names. NOTE: follow-on analysis by Linux developers states that "There is no way for unprivileged users (or really even the root user) to add new clocksources." |
| CVE-2007-5904 | Multiple buffer overflows in CIFS VFS in Linux kernel 2.6.23 and earlier allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via long SMB responses that trigger the overflows in the SendReceive function. |
| CVE-2007-5501 | The tcp_sacktag_write_queue function in net/ipv4/tcp_input.c in Linux kernel 2.6.21 through 2.6.23.7, and 2.6.24-rc through 2.6.24-rc2, allows remote attackers to cause a denial of service (crash) via crafted ACK responses that trigger a NULL pointer dereference. |
| CVE-2007-5500 | The wait_task_stopped function in the Linux kernel before 2.6.23.8 checks a TASK_TRACED bit instead of an exit_state value, which allows local users to cause a denial of service (machine crash) via unspecified vectors. NOTE: some of these details are obtained from third party information. |
| CVE-2007-5498 | The Xen hypervisor block backend driver for Linux kernel 2.6.18, when running on a 64-bit host with a 32-bit paravirtualized guest, allows local privileged users in the guest OS to cause a denial of service (host OS crash) via a request that specifies a large number of blocks. |
| CVE-2007-5494 | Memory leak in the Red Hat Content Accelerator kernel patch in Red Hat Enterprise Linux (RHEL) 4 and 5 allows local users to cause a denial of service (memory consumption) via a large number of open requests involving O_ATOMICLOOKUP. |
| CVE-2007-5093 | The disconnect method in the Philips USB Webcam (pwc) driver in Linux kernel 2.6.x before 2.6.22.6 "relies on user space to close the device," which allows user-assisted local attackers to cause a denial of service (USB subsystem hang and CPU consumption in khubd) by not closing the device after the disconnect is invoked. NOTE: this rarely crosses privilege boundaries, unless the attacker can convince the victim to unplug the affected device. |
| CVE-2007-5087 | The ATM module in the Linux kernel before 2.4.35.3, when CLIP support is enabled, allows local users to cause a denial of service (kernel panic) by reading /proc/net/atm/arp before the CLIP module has been loaded. |
| CVE-2007-5001 | Linux kernel before 2.4.21 allows local users to cause a denial of service (kernel panic) via asynchronous input or output on a FIFO special file. |
| CVE-2007-4997 | Integer underflow in the ieee80211_rx function in net/ieee80211/ieee80211_rx.c in the Linux kernel 2.6.x before 2.6.23 allows remote attackers to cause a denial of service (crash) via a crafted SKB length value in a runt IEEE 802.11 frame when the IEEE80211_STYPE_QOS_DATA flag is set, aka an "off-by-two error." |
| CVE-2007-4774 | The Linux kernel before 2.4.36-rc1 has a race condition. It was possible to bypass systrace policies by flooding the ptraced process with SIGCONT signals, which can can wake up a PTRACED process. |
| CVE-2007-4574 | Unspecified vulnerability in the "stack unwinder fixes" in kernel in Red Hat Enterprise Linux 5, when running on AMD64 and Intel 64, allows local users to cause a denial of service via unknown vectors. |
| CVE-2007-4573 | The IA32 system call emulation functionality in Linux kernel 2.4.x and 2.6.x before 2.6.22.7, when running on the x86_64 architecture, does not zero extend the eax register after the 32bit entry path to ptrace is used, which might allow local users to gain privileges by triggering an out-of-bounds access to the system call table using the %RAX register. |
| CVE-2007-4571 | The snd_mem_proc_read function in sound/core/memalloc.c in the Advanced Linux Sound Architecture (ALSA) in the Linux kernel before 2.6.22.8 does not return the correct write size, which allows local users to obtain sensitive information (kernel memory contents) via a small count argument, as demonstrated by multiple reads of /proc/driver/snd-page-alloc. |
| CVE-2007-4567 | The ipv6_hop_jumbo function in net/ipv6/exthdrs.c in the Linux kernel before 2.6.22 does not properly validate the hop-by-hop IPv6 extended header, which allows remote attackers to cause a denial of service (NULL pointer dereference and kernel panic) via a crafted IPv6 packet. |
| CVE-2007-4311 | The xfer_secondary_pool function in drivers/char/random.c in the Linux kernel 2.4 before 2.4.35 performs reseed operations on only the first few bytes of a buffer, which might make it easier for attackers to predict the output of the random number generator, related to incorrect use of the sizeof operator. |
| CVE-2007-4308 | The (1) aac_cfg_open and (2) aac_compat_ioctl functions in the SCSI layer ioctl path in aacraid in the Linux kernel before 2.6.23-rc2 do not check permissions for ioctls, which might allow local users to cause a denial of service or gain privileges. |
| CVE-2007-4133 | The (1) hugetlb_vmtruncate_list and (2) hugetlb_vmtruncate functions in fs/hugetlbfs/inode.c in the Linux kernel before 2.6.19-rc4 perform certain prio_tree calculations using HPAGE_SIZE instead of PAGE_SIZE units, which allows local users to cause a denial of service (panic) via unspecified vectors. |
| CVE-2007-4130 | The Linux kernel 2.6.9 before 2.6.9-67 in Red Hat Enterprise Linux (RHEL) 4 on Itanium (ia64) does not properly handle page faults during NUMA memory access, which allows local users to cause a denial of service (panic) via invalid arguments to set_mempolicy in an MPOL_BIND operation. |
| CVE-2007-3945 | Rule Set Based Access Control (RSBAC) before 1.3.5 does not properly use the Linux Kernel Crypto API for the Linux kernel 2.6.x, which allows context-dependent attackers to bypass authentication controls via unspecified vectors, possibly involving User Management password hashing and unchecked function return codes. |
| CVE-2007-3851 | The drm/i915 component in the Linux kernel before 2.6.22.2, when used with i965G and later chipsets, allows local users with access to an X11 session and Direct Rendering Manager (DRM) to write to arbitrary memory locations and gain privileges via a crafted batchbuffer. |
| CVE-2007-3850 | The eHCA driver in Linux kernel 2.6 before 2.6.22, when running on PowerPC, does not properly map userspace resources, which allows local users to read portions of physical address space. |
| CVE-2007-3848 | Linux kernel 2.4.35 and other versions allows local users to send arbitrary signals to a child process that is running at higher privileges by causing a setuid-root parent process to die, which delivers an attacker-controlled parent process death signal (PR_SET_PDEATHSIG). |
| CVE-2007-3843 | The Linux kernel before 2.6.23-rc1 checks the wrong global variable for the CIFS sec mount option, which might allow remote attackers to spoof CIFS network traffic that the client configured for security signatures, as demonstrated by lack of signing despite sec=ntlmv2i in a SetupAndX request. |
| CVE-2007-3740 | The CIFS filesystem in the Linux kernel before 2.6.22, when Unix extension support is enabled, does not honor the umask of a process, which allows local users to gain privileges. |
| CVE-2007-3732 | In Linux 2.6 before 2.6.23, the TRACE_IRQS_ON function in iret_exc calls a C function without ensuring that the segments are set properly. The kernel's %fs needs to be restored before the call in TRACE_IRQS_ON and before enabling interrupts, so that "current" references work. Without this, "current" used in the window between iret_exc and the middle of error_code where %fs is reset, would crash. |
| CVE-2007-3731 | The Linux kernel 2.6.20 and 2.6.21 does not properly handle an invalid LDT segment selector in %cs (the xcs field) during ptrace single-step operations, which allows local users to cause a denial of service (NULL dereference and OOPS) via certain code that makes ptrace PTRACE_SETREGS and PTRACE_SINGLESTEP requests, related to the TRACE_IRQS_ON function, and possibly related to the arch_ptrace function. |
| CVE-2007-3720 | The process scheduler in the Linux kernel 2.4 performs scheduling based on CPU billing gathered from periodic process sampling ticks, which allows local users to cause a denial of service (CPU consumption) by performing voluntary nanosecond sleeps that result in the process not being active during a clock interrupt, as described in "Secretly Monopolizing the CPU Without Superuser Privileges." |
| CVE-2007-3719 | The process scheduler in the Linux kernel 2.6.16 gives preference to "interactive" processes that perform voluntary sleeps, which allows local users to cause a denial of service (CPU consumption), as described in "Secretly Monopolizing the CPU Without Superuser Privileges." |
| CVE-2007-3642 | The decode_choice function in net/netfilter/nf_conntrack_h323_asn1.c in the Linux kernel before 2.6.20.15, 2.6.21.x before 2.6.21.6, and before 2.6.22 allows remote attackers to cause a denial of service (crash) via an encoded, out-of-range index value for a choice field, which triggers a NULL pointer dereference. |
| CVE-2007-3513 | The lcd_write function in drivers/usb/misc/usblcd.c in the Linux kernel before 2.6.22-rc7 does not limit the amount of memory used by a caller, which allows local users to cause a denial of service (memory consumption). |
| CVE-2007-3380 | The Distributed Lock Manager (DLM) in the cluster manager for Linux kernel 2.6.15 allows remote attackers to cause a denial of service (loss of lock services) by connecting to the DLM port, which probably prevents other processes from accessing the service. |
| CVE-2007-3379 | Unspecified vulnerability in the kernel in Red Hat Enterprise Linux (RHEL) 4 on the x86_64 platform allows local users to cause a denial of service (OOPS) via unspecified vectors related to the get_gate_vma function and the fuser command. |
| CVE-2007-3107 | The signal handling in the Linux kernel before 2.6.22, including 2.6.2, when running on PowerPC systems using HTX, allows local users to cause a denial of service via unspecified vectors involving floating point corruption and concurrency, related to clearing of MSR bits. |
| CVE-2007-3105 | Stack-based buffer overflow in the random number generator (RNG) implementation in the Linux kernel before 2.6.22 might allow local root users to cause a denial of service or gain privileges by setting the default wakeup threshold to a value greater than the output pool size, which triggers writing random numbers to the stack by the pool transfer function involving "bound check ordering". NOTE: this issue might only cross privilege boundaries in environments that have granular assignment of privileges for root. |
| CVE-2007-3104 | The sysfs_readdir function in the Linux kernel 2.6, as used in Red Hat Enterprise Linux (RHEL) 4.5 and other distributions, allows users to cause a denial of service (kernel OOPS) by dereferencing a null pointer to an inode in a dentry. |
| CVE-2007-2878 | The VFAT compat ioctls in the Linux kernel before 2.6.21.2, when run on a 64-bit system, allow local users to corrupt a kernel_dirent struct and cause a denial of service (system crash) via unknown vectors. |
| CVE-2007-2876 | The sctp_new function in (1) ip_conntrack_proto_sctp.c and (2) nf_conntrack_proto_sctp.c in Netfilter in Linux kernel 2.6 before 2.6.20.13, and 2.6.21.x before 2.6.21.4, allows remote attackers to cause a denial of service by causing certain invalid states that trigger a NULL pointer dereference. |
| CVE-2007-2875 | Integer underflow in the cpuset_tasks_read function in the Linux kernel before 2.6.20.13, and 2.6.21.x before 2.6.21.4, when the cpuset filesystem is mounted, allows local users to obtain kernel memory contents by using a large offset when reading the /dev/cpuset/tasks file. |
| CVE-2007-2764 | The embedded Linux kernel in certain Sun-Brocade SilkWorm switches before 20070516 does not properly handle a situation in which a non-root user creates a kernel process, which allows attackers to cause a denial of service (oops and device reboot) via unspecified vectors. |
| CVE-2007-2525 | Memory leak in the PPP over Ethernet (PPPoE) socket implementation in the Linux kernel before 2.6.21-git8 allows local users to cause a denial of service (memory consumption) by creating a socket using connect, and releasing it before the PPPIOCGCHAN ioctl is initialized. |
| CVE-2007-2480 | The _udp_lib_get_port function in net/ipv4/udp.c in Linux kernel 2.6.21 and earlier does not prevent a bind to a port with a local address when there is already a bind to that port with a wildcard local address, which might allow local users to intercept local traffic for daemons or other applications. |
| CVE-2007-2453 | The random number feature in Linux kernel 2.6 before 2.6.20.13, and 2.6.21.x before 2.6.21.4, (1) does not properly seed pools when there is no entropy, or (2) uses an incorrect cast when extracting entropy, which might cause the random number generator to provide the same values after reboots on systems without an entropy source. |
| CVE-2007-2451 | Unspecified vulnerability in drivers/crypto/geode-aes.c in GEODE-AES in the Linux kernel before 2.6.21.3 allows attackers to obtain sensitive information via unspecified vectors. |
| CVE-2007-2172 | A typo in Linux kernel 2.6 before 2.6.21-rc6 and 2.4 before 2.4.35 causes RTA_MAX to be used as an array size instead of RTN_MAX, which leads to an "out of bound access" by the (1) dn_fib_props (dn_fib.c, DECNet) and (2) fib_props (fib_semantics.c, IPv4) functions. |
| CVE-2007-1865 | ** DISPUTED ** The ipv6_getsockopt_sticky function in the kernel in Red Hat Enterprise Linux (RHEL) Beta 5.1.0 allows local users to obtain sensitive information (kernel memory contents) via a negative value of the len parameter. NOTE: this issue has been disputed in a bug comment, stating that "len is ignored when copying header info to the user's buffer." |
| CVE-2007-1861 | The nl_fib_lookup function in net/ipv4/fib_frontend.c in Linux Kernel before 2.6.20.8 allows attackers to cause a denial of service (kernel panic) via NETLINK_FIB_LOOKUP replies, which trigger infinite recursion and a stack overflow. |
| CVE-2007-1734 | The DCCP support in the do_dccp_getsockopt function in net/dccp/proto.c in Linux kernel 2.6.20 and later does not verify the upper bounds of the optlen value, which allows local users running on certain architectures to read kernel memory or cause a denial of service (oops), a related issue to CVE-2007-1730. |
| CVE-2007-1730 | Integer signedness error in the DCCP support in the do_dccp_getsockopt function in net/dccp/proto.c in Linux kernel 2.6.20 and later allows local users to read kernel memory or cause a denial of service (oops) via a negative optlen value. |
| CVE-2007-1592 | net/ipv6/tcp_ipv6.c in Linux kernel 2.6.x up to 2.6.21-rc3 inadvertently copies the ipv6_fl_socklist from a listening TCP socket to child sockets, which allows local users to cause a denial of service (OOPS) or double free by opening a listening IPv6 socket, attaching a flow label, and connecting to that socket. |
| CVE-2007-1497 | nf_conntrack in netfilter in the Linux kernel before 2.6.20.3 does not set nfctinfo during reassembly of fragmented packets, which leaves the default value as IP_CT_ESTABLISHED and might allow remote attackers to bypass certain rulesets using IPv6 fragments. |
| CVE-2007-1496 | nfnetlink_log in netfilter in the Linux kernel before 2.6.20.3 allows attackers to cause a denial of service (crash) via unspecified vectors involving the (1) nfulnl_recv_config function, (2) using "multiple packets per netlink message", and (3) bridged packets, which trigger a NULL pointer dereference. |
| CVE-2007-1388 | The do_ipv6_setsockopt function in net/ipv6/ipv6_sockglue.c in Linux kernel before 2.6.20, and possibly other versions, allows local users to cause a denial of service (oops) by calling setsockopt with the IPV6_RTHDR option name and possibly a zero option length or invalid option value, which triggers a NULL pointer dereference. |
| CVE-2007-1357 | The atalk_sum_skb function in AppleTalk for Linux kernel 2.6.x before 2.6.21, and possibly 2.4.x, allows remote attackers to cause a denial of service (crash) via an AppleTalk frame that is shorter than the specified length, which triggers a BUG_ON call when an attempt is made to perform a checksum. |
| CVE-2007-1353 | The setsockopt function in the L2CAP and HCI Bluetooth support in the Linux kernel before 2.4.34.3 allows context-dependent attackers to read kernel memory and obtain sensitive information via unspecified vectors involving the copy_from_user function accessing an uninitialized stack buffer. |
| CVE-2007-1217 | Buffer overflow in the bufprint function in capiutil.c in libcapi, as used in Linux kernel 2.6.9 to 2.6.20 and isdn4k-utils, allows local users to cause a denial of service (crash) and possibly gain privileges via a crafted CAPI packet. |
| CVE-2007-1000 | The ipv6_getsockopt_sticky function in net/ipv6/ipv6_sockglue.c in the Linux kernel before 2.6.20.2 allows local users to read arbitrary kernel memory via certain getsockopt calls that trigger a NULL dereference. |
| CVE-2007-0997 | Race condition in the tee (sys_tee) system call in the Linux kernel 2.6.17 through 2.6.17.6 might allow local users to cause a denial of service (system crash), obtain sensitive information (kernel memory contents), or gain privileges via unspecified vectors related to a potentially dropped ipipe lock during a race between two pipe readers. |
| CVE-2007-0958 | Linux kernel 2.6.x before 2.6.20 allows local users to read unreadable binaries by using the interpreter (PT_INTERP) functionality and triggering a core dump, a variant of CVE-2004-1073. |
| CVE-2007-0822 | umount, when running with the Linux 2.6.15 kernel on Slackware Linux 10.2, allows local users to trigger a NULL dereference and application crash by invoking the program with a pathname for a USB pen drive that was mounted and then physically removed, which might allow the users to obtain sensitive information, including core file contents. |
| CVE-2007-0773 | The Linux kernel before 2.6.9-42.0.8 in Red Hat 4.4 allows local users to cause a denial of service (kernel OOPS from null dereference) via fput in a 32-bit ioctl on 64-bit x86 systems, an incomplete fix of CVE-2005-3044.1. |
| CVE-2007-0772 | The Linux kernel 2.6.13 and other versions before 2.6.20.1 allows remote attackers to cause a denial of service (oops) via a crafted NFSACL 2 ACCESS request that triggers a free of an incorrect pointer. |
| CVE-2007-0771 | The utrace support in Linux kernel 2.6.18, and other versions, allows local users to cause a denial of service (system hang) related to "MT exec + utrace_attach spin failure mode," as demonstrated by ptrace-thrash.c. |
| CVE-2007-0006 | The key serial number collision avoidance code in the key_alloc_serial function in Linux kernel 2.6.9 up to 2.6.20 allows local users to cause a denial of service (crash) via vectors that trigger a null dereference, as originally reported as "spinlock CPU recursion." |
| CVE-2007-0005 | Multiple buffer overflows in the (1) read and (2) write handlers in the Omnikey CardMan 4040 driver in the Linux kernel before 2.6.21-rc3 allow local users to gain privileges. |
| CVE-2007-0004 | The NFS client implementation in the kernel in Red Hat Enterprise Linux (RHEL) 3, when a filesystem is mounted with the noacl option, checks permissions for the open system call via vfs_permission (mode bits) data rather than an NFS ACCESS call to the server, which allows local client processes to obtain a false success status from open calls that the server would deny, and possibly obtain sensitive information about file permissions on the server, as demonstrated in a root_squash environment. NOTE: it is uncertain whether any scenarios involving this issue cross privilege boundaries. |
| CVE-2007-0001 | The file watch implementation in the audit subsystem (auditctl -w) in the Red Hat Enterprise Linux (RHEL) 4 kernel 2.6.9 allows local users to cause a denial of service (kernel panic) by replacing a watched file, which does not cause the watch on the old inode to be dropped. |
| CVE-2006-7229 | The skge driver 1.5 in Linux kernel 2.6.15 on Ubuntu does not properly use the spin_lock and spin_unlock functions, which allows remote attackers to cause a denial of service (machine crash) via a flood of network traffic. |
| CVE-2006-7203 | The compat_sys_mount function in fs/compat.c in Linux kernel 2.6.20 and earlier allows local users to cause a denial of service (NULL pointer dereference and oops) by mounting a smbfs file system in compatibility mode ("mount -t smbfs"). |
| CVE-2006-7051 | The sys_timer_create function in posix-timers.c for Linux kernel 2.6.x allows local users to cause a denial of service (memory consumption) and possibly bypass memory limits or cause other processes to be killed by creating a large number of posix timers, which are allocated in kernel memory but are not treated as part of the process' memory. |
| CVE-2006-6921 | Unspecified versions of the Linux kernel allow local users to cause a denial of service (unrecoverable zombie process) via a program with certain instructions that prevent init from properly reaping a child whose parent has died. |
| CVE-2006-6655 | The procfs implementation in NetBSD-current before 20061023, NetBSD 3.0 and 3.0.1 before 20061024, and NetBSD 2.x before 20061029 allows local users to cause a denial of service (kernel panic) by attempting to access /emul/linux/proc/0/stat on a procfs filesystem that was mounted with mount_procfs -o linux, which results in a NULL pointer dereference. |
| CVE-2006-6535 | The dev_queue_xmit function in Linux kernel 2.6 can fail before calling the local_bh_disable function, which could lead to data corruption and "node lockups." NOTE: it is not clear whether this issue is exploitable. |
| CVE-2006-6333 | The tr_rx function in ibmtr.c for Linux kernel 2.6.19 assigns the wrong flag to the ip_summed field, which allows remote attackers to cause a denial of service (memory corruption) via crafted packets that cause the kernel to interpret another field as an offset. |
| CVE-2006-6304 | The do_coredump function in fs/exec.c in the Linux kernel 2.6.19 sets the flag variable to O_EXCL but does not use it, which allows context-dependent attackers to modify arbitrary files via a rewrite attack during a core dump. |
| CVE-2006-6128 | The ReiserFS functionality in Linux kernel 2.6.18, and possibly other versions, allows local users to cause a denial of service via a malformed ReiserFS file system that triggers memory corruption when a sync is performed. |
| CVE-2006-6106 | Multiple buffer overflows in the cmtp_recv_interopmsg function in the Bluetooth driver (net/bluetooth/cmtp/capi.c) in the Linux kernel 2.4.22 up to 2.4.33.4 and 2.6.2 before 2.6.18.6, and 2.6.19.x, allow remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via CAPI messages with a large value for the length of the (1) manu (manufacturer) or (2) serial (serial number) field. |
| CVE-2006-6060 | The NTFS filesystem code in Linux kernel 2.6.x up to 2.6.18, and possibly other versions, allows local users to cause a denial of service (CPU consumption) via a malformed NTFS file stream that triggers an infinite loop in the __find_get_block_slow function. |
| CVE-2006-6058 | The minix filesystem code in Linux kernel 2.6.x before 2.6.24, including 2.6.18, allows local users to cause a denial of service (hang) via a malformed minix file stream that triggers an infinite loop in the minix_bmap function. NOTE: this issue might be due to an integer overflow or signedness error. |
| CVE-2006-6057 | The Linux kernel 2.6.x up to 2.6.18, and possibly other versions, on Fedora Core 6 and possibly other operating systems, allows local users to cause a denial of service (crash) via a malformed gfs2 file stream that triggers a NULL pointer dereference in the init_journal function. |
| CVE-2006-6056 | Linux kernel 2.6.x up to 2.6.18 and possibly other versions, when SELinux hooks are enabled, allows local users to cause a denial of service (crash) via a malformed file stream that triggers a NULL pointer dereference in the superblock_doinit function, as demonstrated using an HFS filesystem image. |
| CVE-2006-6054 | The ext2 file system code in Linux kernel 2.6.x allows local users to cause a denial of service (crash) via an ext2 stream with malformed data structures that triggers an error in the ext2_check_page due to a length that is smaller than the minimum. |
| CVE-2006-6053 | The ext3fs_dirhash function in Linux kernel 2.6.x allows local users to cause a denial of service (crash) via an ext3 stream with malformed data structures. |
| CVE-2006-5871 | smbfs in Linux kernel 2.6.8 and other versions, and 2.4.x before 2.4.34, when UNIX extensions are enabled, ignores certain mount options, which could cause clients to use server-specified uid, gid and mode settings. |
| CVE-2006-5823 | The zlib_inflate function in Linux kernel 2.6.x allows local users to cause a denial of service (crash) via a malformed filesystem that uses zlib compression that triggers memory corruption, as demonstrated using cramfs. |
| CVE-2006-5757 | Race condition in the __find_get_block_slow function in the ISO9660 filesystem in Linux 2.6.18 and possibly other versions allows local users to cause a denial of service (infinite loop) by mounting a crafted ISO9660 filesystem containing malformed data structures. |
| CVE-2006-5755 | Linux kernel before 2.6.18, when running on x86_64 systems, does not properly save or restore EFLAGS during a context switch, which allows local users to cause a denial of service (crash) by causing SYSENTER to set an NT flag, which can trigger a crash on the IRET of the next task. |
| CVE-2006-5754 | The aio_setup_ring function in Linux kernel does not properly initialize a variable, which allows local users to cause a denial of service (crash) via an unspecified error path that causes an incorrect free operation. |
| CVE-2006-5753 | Unspecified vulnerability in the listxattr system call in Linux kernel, when a "bad inode" is present, allows local users to cause a denial of service (data corruption) and possibly gain privileges via unknown vectors. |
| CVE-2006-5751 | Integer overflow in the get_fdb_entries function in net/bridge/br_ioctl.c in the Linux kernel before 2.6.18.4 allows local users to execute arbitrary code via a large maxnum value in an ioctl request. |
| CVE-2006-5749 | The isdn_ppp_ccp_reset_alloc_state function in drivers/isdn/isdn_ppp.c in the Linux 2.4 kernel before 2.4.34-rc4 does not call the init_timer function for the ISDN PPP CCP reset state timer, which has unknown attack vectors and results in a system crash. |
| CVE-2006-5701 | Double free vulnerability in squashfs module in the Linux kernel 2.6.x, as used in Fedora Core 5 and possibly other distributions, allows local users to cause a denial of service by mounting a crafted squashfs filesystem. |
| CVE-2006-5619 | The seqfile handling (ip6fl_get_n function in ip6_flowlabel.c) in Linux kernel 2.6 up to 2.6.18-stable allows local users to cause a denial of service (hang or oops) via unspecified manipulations that trigger an infinite loop while searching for flowlabels. |
| CVE-2006-5331 | The altivec_unavailable_exception function in arch/powerpc/kernel/traps.c in the Linux kernel before 2.6.19 on 64-bit systems mishandles the case where CONFIG_ALTIVEC is defined and the CPU actually supports Altivec, but the Altivec support was not detected by the kernel, which allows local users to cause a denial of service (panic) by triggering execution of an Altivec instruction. |
| CVE-2006-5174 | The copy_from_user function in the uaccess code in Linux kernel 2.6 before 2.6.19-rc1, when running on s390, does not properly clear a kernel buffer, which allows local user space programs to read portions of kernel memory by "appending to a file from a bad address," which triggers a fault that prevents the unused memory from being cleared in the kernel buffer. |
| CVE-2006-5173 | Linux kernel does not properly save or restore EFLAGS during a context switch, or reset the flags when creating new threads, which allows local users to cause a denial of service (process crash), as demonstrated using a process that sets the Alignment Check flag (EFLAGS 0x40000), which triggers a SIGBUS in other processes that have an unaligned access. |
| CVE-2006-5158 | The nlmclnt_mark_reclaim in clntlock.c in NFS lockd in Linux kernel before 2.6.16 allows remote attackers to cause a denial of service (process crash) and deny access to NFS exports via unspecified vectors that trigger a kernel oops (null dereference) and a deadlock. |
| CVE-2006-4997 | The clip_mkip function in net/atm/clip.c of the ATM subsystem in Linux kernel allows remote attackers to cause a denial of service (panic) via unknown vectors that cause the ATM subsystem to access the memory of socket buffers after they are freed (freed pointer dereference). |
| CVE-2006-4814 | The mincore function in the Linux kernel before 2.4.33.6 does not properly lock access to user space, which has unspecified impact and attack vectors, possibly related to a deadlock. |
| CVE-2006-4813 | The __block_prepare_write function in fs/buffer.c for Linux kernel 2.6.x before 2.6.13 does not properly clear buffers during certain error conditions, which allows local users to read portions of files that have been unlinked. |
| CVE-2006-4663 | ** DISPUTED ** The source code tar archive of the Linux kernel 2.6.16, 2.6.17.11, and possibly other versions specifies weak permissions (0666 and 0777) for certain files and directories, which might allow local users to insert Trojan horse source code that would be used during the next kernel compilation. NOTE: another researcher disputes the vulnerability, stating that he finds "Not a single world-writable file or directory." CVE analysis as of 20060908 indicates that permissions will only be weak under certain unusual or insecure scenarios. |
| CVE-2006-4623 | The Unidirectional Lightweight Encapsulation (ULE) decapsulation component in dvb-core/dvb_net.c in the dvb driver in the Linux kernel 2.6.17.8 allows remote attackers to cause a denial of service (crash) via an SNDU length of 0 in a ULE packet. |
| CVE-2006-4572 | ip6_tables in netfilter in the Linux kernel before 2.6.16.31 allows remote attackers to (1) bypass a rule that disallows a protocol, via a packet with the protocol header not located immediately after the fragment header, aka "ip6_tables protocol bypass bug;" and (2) bypass a rule that looks for a certain extension header, via a packet with an extension header outside the first fragment, aka "ip6_tables extension header bypass bug." |
| CVE-2006-4538 | Linux kernel 2.6.17 and earlier, when running on IA64 or SPARC platforms, allows local users to cause a denial of service (crash) via a malformed ELF file that triggers memory maps that cross region boundaries. |
| CVE-2006-4535 | The Linux kernel 2.6.17.10 and 2.6.17.11 and 2.6.18-rc5 allows local users to cause a denial of service (crash) via an SCTP socket with a certain SO_LINGER value, possibly related to the patch for CVE-2006-3745. NOTE: older kernel versions for specific Linux distributions are also affected, due to backporting of the CVE-2006-3745 patch. |
| CVE-2006-4342 | The kernel in Red Hat Enterprise Linux 3, when running on SMP systems, allows local users to cause a denial of service (deadlock) by running the shmat function on an shm at the same time that shmctl is removing that shm (IPC_RMID), which prevents a spinlock from being unlocked. |
| CVE-2006-4145 | The Universal Disk Format (UDF) filesystem driver in Linux kernel 2.6.17 and earlier allows local users to cause a denial of service (hang and crash) via certain operations involving truncated files, as demonstrated via the dd command. |
| CVE-2006-4093 | Linux kernel 2.x.6 before 2.6.17.9 and 2.4.x before 2.4.33.1 on PowerPC PPC970 systems allows local users to cause a denial of service (crash) related to the "HID0 attention enable on PPC970 at boot time." |
| CVE-2006-3745 | Unspecified vulnerability in the sctp_make_abort_user function in the SCTP implementation in Linux 2.6.x before 2.6.17.10 and 2.4.23 up to 2.4.33 allows local users to cause a denial of service (panic) and possibly gain root privileges via unknown attack vectors. |
| CVE-2006-3741 | The perfmonctl system call (sys_perfmonctl) in Linux kernel 2.4.x and 2.6 before 2.6.18, when running on Itanium systems, does not properly track the reference count for file descriptors, which allows local users to cause a denial of service (file descriptor consumption). |
| CVE-2006-3635 | The ia64 subsystem in the Linux kernel before 2.6.26 allows local users to cause a denial of service (stack consumption and system crash) via a crafted application that leverages the mishandling of invalid Register Stack Engine (RSE) state. |
| CVE-2006-3634 | The (1) __futex_atomic_op and (2) futex_atomic_cmpxchg_inatomic functions in Linux kernel 2.6.17-rc4 to 2.6.18-rc2 perform the atomic futex operation in the kernel address space instead of the user address space, which allows local users to cause a denial of service (crash). |
| CVE-2006-3626 | Race condition in Linux kernel 2.6.17.4 and earlier allows local users to gain root privileges by using prctl with PR_SET_DUMPABLE in a way that causes /proc/self/environ to become setuid root. |
| CVE-2006-3468 | Linux kernel 2.6.x, when using both NFS and EXT3, allows remote attackers to cause a denial of service (file system panic) via a crafted UDP packet with a V2 lookup procedure that specifies a bad file handle (inode number), which triggers an error and causes an exported directory to be remounted read-only. |
| CVE-2006-3085 | xt_sctp in netfilter for Linux kernel before 2.6.17.1 allows attackers to cause a denial of service (infinite loop) via an SCTP chunk with a 0 length. |
| CVE-2006-2936 | The ftdi_sio driver (usb/serial/ftdi_sio.c) in Linux kernel 2.6.x up to 2.6.17, and possibly later versions, allows local users to cause a denial of service (memory consumption) by writing more data to the serial port than the hardware can handle, which causes the data to be queued. |
| CVE-2006-2935 | The dvd_read_bca function in the DVD handling code in drivers/cdrom/cdrom.c in Linux kernel 2.2.16, and later versions, assigns the wrong value to a length variable, which allows local users to execute arbitrary code via a crafted USB Storage device that triggers a buffer overflow. |
| CVE-2006-2934 | SCTP conntrack (ip_conntrack_proto_sctp.c) in netfilter for Linux kernel 2.6.17 before 2.6.17.3 and 2.6.16 before 2.6.16.23 allows remote attackers to cause a denial of service (crash) via a packet without any chunks, which causes a variable to contain an invalid value that is later used to dereference a pointer. |
| CVE-2006-2629 | Race condition in Linux kernel 2.6.15 to 2.6.17, when running on SMP platforms, allows local users to cause a denial of service (crash) by creating and exiting a large number of tasks, then accessing the /proc entry of a task that is exiting, which causes memory corruption that leads to a failure in the prune_dcache function or a BUG_ON error in include/linux/list.h. |
| CVE-2006-2451 | The suid_dumpable support in Linux kernel 2.6.13 up to versions before 2.6.17.4, and 2.6.16 before 2.6.16.24, allows a local user to cause a denial of service (disk consumption) and possibly gain privileges via the PR_SET_DUMPABLE argument of the prctl function and a program that causes a core dump file to be created in a directory for which the user does not have permissions. |
| CVE-2006-2448 | Linux kernel before 2.6.16.21 and 2.6.17, when running on PowerPC, does not perform certain required access_ok checks, which allows local users to read arbitrary kernel memory on 64-bit systems (signal_64.c) and cause a denial of service (crash) and possibly read kernel memory on 32-bit systems (signal_32.c). |
| CVE-2006-2446 | Race condition between the kfree_skb and __skb_unlink functions in the socket buffer handling in Linux kernel 2.6.9, and possibly other versions, allows remote attackers to cause a denial of service (crash), as demonstrated using the TCP stress tests from the LTP test suite. |
| CVE-2006-2445 | Race condition in run_posix_cpu_timers in Linux kernel before 2.6.16.21 allows local users to cause a denial of service (BUG_ON crash) by causing one CPU to attach a timer to a process that is exiting. |
| CVE-2006-2444 | The snmp_trap_decode function in the SNMP NAT helper for Linux kernel before 2.6.16.18 allows remote attackers to cause a denial of service (crash) via unspecified remote attack vectors that cause failures in snmp_trap_decode that trigger (1) frees of random memory or (2) frees of previously-freed memory (double-free) by snmp_trap_decode as well as its calling function, as demonstrated via certain test cases of the PROTOS SNMP test suite. |
| CVE-2006-2272 | Linux SCTP (lksctp) before 2.6.17 allows remote attackers to cause a denial of service (kernel panic) via incoming IP fragmented (1) COOKIE_ECHO and (2) HEARTBEAT SCTP control chunks. |
| CVE-2006-2271 | The ECNE chunk handling in Linux SCTP (lksctp) before 2.6.17 allows remote attackers to cause a denial of service (kernel panic) via an unexpected chunk when the session is in CLOSED state. |
| CVE-2006-2071 | Linux kernel 2.4.x and 2.6.x up to 2.6.16 allows local users to bypass IPC permissions and modify a readonly attachment of shared memory by using mprotect to give write permission to the attachment. NOTE: some original raw sources combined this issue with CVE-2006-1524, but they are different bugs. |
| CVE-2006-1863 | Directory traversal vulnerability in CIFS in Linux 2.6.16 and earlier allows local users to escape chroot restrictions for an SMB-mounted filesystem via "..\\" sequences, a similar vulnerability to CVE-2006-1864. |
| CVE-2006-1862 | The virtual memory implementation in Linux kernel 2.6.x allows local users to cause a denial of service (panic) by running lsof a large number of times in a way that produces a heavy system load. |
| CVE-2006-1860 | lease_init in fs/locks.c in Linux kernel before 2.6.16.16 allows attackers to cause a denial of service (fcntl_setlease lockup) via actions that cause lease_init to free a lock that might not have been allocated on the stack. |
| CVE-2006-1859 | Memory leak in __setlease in fs/locks.c in Linux kernel before 2.6.16.16 allows attackers to cause a denial of service (memory consumption) via unspecified actions related to an "uninitialised return value," aka "slab leak." |
| CVE-2006-1858 | SCTP in Linux kernel before 2.6.16.17 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a chunk length that is inconsistent with the actual length of provided parameters. |
| CVE-2006-1857 | Buffer overflow in SCTP in Linux kernel before 2.6.16.17 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a malformed HB-ACK chunk. |
| CVE-2006-1856 | Certain modifications to the Linux kernel 2.6.16 and earlier do not add the appropriate Linux Security Modules (LSM) file_permission hooks to the (1) readv and (2) writev functions, which might allow attackers to bypass intended access restrictions. |
| CVE-2006-1855 | choose_new_parent in Linux kernel before 2.6.11.12 includes certain debugging code, which allows local users to cause a denial of service (panic) by causing certain circumstances involving termination of a parent process. |
| CVE-2006-1528 | Linux kernel before 2.6.13 allows local users to cause a denial of service (crash) via a dio transfer from the sg driver to memory mapped (mmap) IO space. |
| CVE-2006-1527 | The SCTP-netfilter code in Linux kernel before 2.6.16.13 allows remote attackers to trigger a denial of service (infinite loop) via unknown vectors that cause an invalid SCTP chunk size to be processed by the for_each_sctp_chunk function. |
| CVE-2006-1525 | ip_route_input in Linux kernel 2.6 before 2.6.16.8 allows local users to cause a denial of service (panic) via a request for a route for a multicast IP address, which triggers a null dereference. |
| CVE-2006-1524 | madvise_remove in Linux kernel 2.6.16 up to 2.6.16.6 does not follow file and mmap restrictions, which allows local users to bypass IPC permissions and replace portions of readonly tmpfs files with zeroes, aka the MADV_REMOVE vulnerability. NOTE: this description was originally written in a way that combined two separate issues. The mprotect issue now has a separate name, CVE-2006-2071. |
| CVE-2006-1523 | The __group_complete_signal function in the RCU signal handling (signal.c) in Linux kernel 2.6.16, and possibly other versions, has unknown impact and attack vectors related to improper use of BUG_ON. |
| CVE-2006-1522 | The sys_add_key function in the keyring code in Linux kernel 2.6.16.1 and 2.6.17-rc1, and possibly earlier versions, allows local users to cause a denial of service (OOPS) via keyctl requests that add a key to a user key instead of a keyring key, which causes an invalid dereference in the __keyring_search_one function. |
| CVE-2006-1368 | Buffer overflow in the USB Gadget RNDIS implementation in the Linux kernel before 2.6.16 allows remote attackers to cause a denial of service (kmalloc'd memory corruption) via a remote NDIS response to OID_GEN_SUPPORTED_LIST, which causes memory to be allocated for the reply data but not the reply structure. |
| CVE-2006-1343 | net/ipv4/netfilter/ip_conntrack_core.c in Linux kernel 2.4 and 2.6, and possibly net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c in 2.6, does not clear sockaddr_in.sin_zero before returning IPv4 socket names from the getsockopt function with SO_ORIGINAL_DST, which allows local users to obtain portions of potentially sensitive memory. |
| CVE-2006-1342 | net/ipv4/af_inet.c in Linux kernel 2.4 does not clear sockaddr_in.sin_zero before returning IPv4 socket names from the (1) getsockname, (2) getpeername, and (3) accept functions, which allows local users to obtain portions of potentially sensitive memory. |
| CVE-2006-1066 | Linux kernel 2.6.16-rc2 and earlier, when running on x86_64 systems with preemption enabled, allows local users to cause a denial of service (oops) via multiple ptrace tasks that perform single steps, which can cause corruption of the DEBUG_STACK stack during the do_debug function call. |
| CVE-2006-1056 | The Linux kernel before 2.6.16.9 and the FreeBSD kernel, when running on AMD64 and other 7th and 8th generation AuthenticAMD processors, only save/restore the FOP, FIP, and FDP x87 registers in FXSAVE/FXRSTOR when an exception is pending, which allows one process to determine portions of the state of floating point instructions of other processes, which can be leveraged to obtain sensitive information such as cryptographic keys. NOTE: this is the documented behavior of AMD64 processors, but it is inconsistent with Intel processors in a security-relevant fashion that was not addressed by the kernels. |
| CVE-2006-1055 | The fill_write_buffer function in sysfs/file.c in Linux kernel 2.6.12 up to versions before 2.6.17-rc1 does not zero terminate a buffer when a length of PAGE_SIZE or more is requested, which might allow local users to cause a denial of service (crash) by causing an out-of-bounds read. |
| CVE-2006-0744 | Linux kernel before 2.6.16.5 does not properly handle uncanonical return addresses on Intel EM64T CPUs, which reports an exception in the SYSRET instead of the next instruction, which causes the kernel exception handler to run on the user stack with the wrong GS. |
| CVE-2006-0742 | The die_if_kernel function in arch/ia64/kernel/unaligned.c in Linux kernel 2.6.x before 2.6.15.6, possibly when compiled with certain versions of gcc, has the "noreturn" attribute set, which allows local users to cause a denial of service by causing user faults on Itanium systems. |
| CVE-2006-0741 | Linux kernel before 2.6.15.5, when running on Intel processors, allows local users to cause a denial of service ("endless recursive fault") via unknown attack vectors related to a "bad elf entry address." |
| CVE-2006-0558 | perfmon (perfmon.c) in Linux kernel on IA64 architectures allows local users to cause a denial of service (crash) by interrupting a task while another process is accessing the mm_struct, which triggers a BUG_ON action in the put_page_testzero function. |
| CVE-2006-0557 | sys_mbind in mempolicy.c in Linux kernel 2.6.16 and earlier does not sanity check the maxnod variable before making certain computations for the get_nodes function, which has unknown impact and attack vectors. |
| CVE-2006-0555 | The Linux Kernel before 2.6.15.5 allows local users to cause a denial of service (NFS client panic) via unknown attack vectors related to the use of O_DIRECT (direct I/O). |
| CVE-2006-0554 | Linux kernel 2.6 before 2.6.15.5 allows local users to obtain sensitive information via a crafted XFS ftruncate call, which may return stale data. |
| CVE-2006-0482 | Linux kernel 2.6.15.1 and earlier, when running on SPARC architectures, allows local users to cause a denial of service (hang) via a "date -s" command, which causes invalid sign extended arguments to be provided to the get_compat_timespec function call. |
| CVE-2006-0457 | Race condition in the (1) add_key, (2) request_key, and (3) keyctl functions in Linux kernel 2.6.x allows local users to cause a denial of service (crash) or read sensitive kernel memory by modifying the length of a string argument between the time that the kernel calculates the length and when it copies the data into kernel memory. |
| CVE-2006-0456 | The strnlen_user function in Linux kernel before 2.6.16 on IBM S/390 can return an incorrect value, which allows local users to cause a denial of service via unknown vectors. |
| CVE-2006-0454 | Linux kernel before 2.6.15.3 down to 2.6.12, while constructing an ICMP response in icmp_send, does not properly handle when the ip_options_echo function in icmp.c fails, which allows remote attackers to cause a denial of service (crash) via vectors such as (1) record-route and (2) timestamp IP options with the needaddr bit set and a truncated value. |
| CVE-2006-0096 | wan/sdla.c in Linux kernel 2.6.x before 2.6.11 and 2.4.x before 2.4.29 does not require the CAP_SYS_RAWIO privilege for an SDLA firmware upgrade, with unknown impact and local attack vectors. NOTE: further investigation suggests that this issue requires root privileges to exploit, since it is protected by CAP_NET_ADMIN; thus it might not be a vulnerability, although capabilities provide finer distinctions between privilege levels. |
| CVE-2006-0095 | dm-crypt in Linux kernel 2.6.15 and earlier does not clear a structure before it is freed, which leads to a memory disclosure that could allow local users to obtain sensitive information about a cryptographic key. |
| CVE-2006-0039 | Race condition in the do_add_counters function in netfilter for Linux kernel 2.6.16 allows local users with CAP_NET_ADMIN capabilities to read kernel memory by triggering the race condition in a way that produces a size value that is inconsistent with allocated memory, which leads to a buffer over-read in IPT_ENTRY_ITERATE. |
| CVE-2006-0038 | Integer overflow in the do_replace function in netfilter for Linux before 2.6.16-rc3, when using "virtualization solutions" such as OpenVZ, allows local users with CAP_NET_ADMIN rights to cause a buffer overflow in the copy_from_user function. |
| CVE-2006-0037 | ip_nat_pptp in the PPTP NAT helper (netfilter/ip_nat_helper_pptp.c) in Linux kernel 2.6.14, and other versions, allows local users to cause a denial of service (memory corruption or crash) via a crafted outbound packet that causes an incorrect offset to be calculated from pointer arithmetic when non-linear SKBs (socket buffers) are used. |
| CVE-2006-0036 | ip_nat_pptp in the PPTP NAT helper (netfilter/ip_nat_helper_pptp.c) in Linux kernel 2.6.14, and other versions, allows remote attackers to cause a denial of service (memory corruption or crash) via an inbound PPTP_IN_CALL_REQUEST packet that causes a null pointer to be used in an offset calculation. |
| CVE-2006-0035 | The netlink_rcv_skb function in af_netlink.c in Linux kernel 2.6.14 and 2.6.15 allows local users to cause a denial of service (infinite loop) via a nlmsg_len field of 0. |
| CVE-2005-4886 | The selinux_parse_skb_ipv6 function in security/selinux/hooks.c in the Linux kernel before 2.6.12-rc4 allows remote attackers to cause a denial of service (OOPS) via vectors associated with an incorrect call to the ipv6_skip_exthdr function. |
| CVE-2005-4881 | The netlink subsystem in the Linux kernel 2.4.x before 2.4.37.6 and 2.6.x before 2.6.13-rc1 does not initialize certain padding fields in structures, which might allow local users to obtain sensitive information from kernel memory via unspecified vectors, related to the (1) tc_fill_qdisc, (2) tcf_fill_node, (3) neightbl_fill_info, (4) neightbl_fill_param_info, (5) neigh_fill_info, (6) rtnetlink_fill_ifinfo, (7) rtnetlink_fill_iwinfo, (8) vif_delete, (9) ipmr_destroy_unres, (10) ipmr_cache_alloc_unres, (11) ipmr_cache_resolve, (12) inet6_fill_ifinfo, (13) tca_get_fill, (14) tca_action_flush, (15) tcf_add_notify, (16) tc_dump_action, (17) cbq_dump_police, (18) __nlmsg_put, (19) __rta_fill, (20) __rta_reserve, (21) inet6_fill_prefix, (22) rsvp_dump, and (23) cbq_dump_ovl functions. |
| CVE-2005-4811 | The hugepage code (hugetlb.c) in Linux kernel 2.6, possibly 2.6.12 and 2.6.13, in certain configurations, allows local users to cause a denial of service (crash) by triggering an mmap error before a prefault, which causes an error in the unmap_hugepage_area function. |
| CVE-2005-4798 | Buffer overflow in NFS readlink handling in the Linux Kernel 2.4 up to 2.4.31 allows remote NFS servers to cause a denial of service (crash) via a long symlink, which is not properly handled in (1) nfs2xdr.c or (2) nfs3xdr.c and causes a crash in the NFS client. |
| CVE-2005-4639 | Buffer overflow in the CA-driver (dst_ca.c) for TwinHan DST Frontend/Card in Linux kernel 2.6.12 and other versions before 2.6.15 allows local users to cause a denial of service (crash) and possibly execute arbitrary code by "reading more than 8 bytes into an 8 byte long array". |
| CVE-2005-4635 | The nl_fib_input function in fib_frontend.c in the Linux kernel before 2.6.15 does not check for valid lengths of the header and payload, which allows remote attackers to cause a denial of service (invalid memory reference) via malformed fib_lookup netlink messages. |
| CVE-2005-4618 | Buffer overflow in sysctl in the Linux Kernel 2.6 before 2.6.15 allows local users to corrupt user memory and possibly cause a denial of service via a long string, which causes sysctl to write a zero byte outside the buffer. NOTE: since the sysctl is called from a userland program that provides the argument, this might not be a vulnerability, unless a legitimate user-assisted or setuid scenario can be identified. |
| CVE-2005-4605 | The procfs code (proc_misc.c) in Linux 2.6.14.3 and other versions before 2.6.15 allows attackers to read sensitive kernel memory via unspecified vectors in which a signed value is added to an unsigned value. |
| CVE-2005-4418 | util-vserver before 0.30.208-1 with kernel-patch-vserver before 1.9.5.5 and 2.x before 2.3 for Debian GNU/Linux sets a default policy that trusts unknown capabilities, which could allow local users to conduct unauthorized activities. |
| CVE-2005-4352 | The securelevels implementation in NetBSD 2.1 and earlier, and Linux 2.6.15 and earlier, allows local users to bypass time setting restrictions and set the clock backwards by setting the clock ahead to the maximum unixtime value (19 Jan 2038), which then wraps around to the minimum value (13 Dec 1901), which can then be set ahead to the desired time, aka "settimeofday() time wrap." |
| CVE-2005-4347 | The Linux 2.4 kernel patch in kernel-patch-vserver before 1.9.5.5 and 2.x before 2.3 for Debian GNU/Linux does not correctly set the "chroot barrier" with util-vserver, which allows attackers to access files on the host system that are outside of the vserver. |
| CVE-2005-3858 | Memory leak in the ip6_input_finish function in ip6_input.c in Linux kernel 2.6.12 and earlier might allow attackers to cause a denial of service via malformed IPv6 packets with unspecified parameter problems, which prevents the SKB from being freed. |
| CVE-2005-3857 | The time_out_leases function in locks.c for Linux kernel before 2.6.15-rc3 allows local users to cause a denial of service (kernel log message consumption) by causing a large number of broken leases, which is recorded to the log using the printk function. |
| CVE-2005-3847 | The handle_stop_signal function in signal.c in Linux kernel 2.6.11 up to other versions before 2.6.13 and 2.6.12.6 allows local users to cause a denial of service (deadlock) by sending a SIGKILL to a real-time threaded process while it is performing a core dump. |
| CVE-2005-3810 | ip_conntrack_proto_icmp.c in ctnetlink in Linux kernel 2.6.14 up to 2.6.14.3 allows attackers to cause a denial of service (kernel oops) via a message without ICMP ID (ICMP_ID) information, which leads to a null dereference. |
| CVE-2005-3809 | The nfattr_to_tcp function in ip_conntrack_proto_tcp.c in ctnetlink in Linux kernel 2.6.14 up to 2.6.14.3 allows attackers to cause a denial of service (kernel oops) via an update message without private protocol information, which triggers a null dereference. |
| CVE-2005-3808 | Integer overflow in the invalidate_inode_pages2_range function in mm/truncate.c in Linux kernel 2.6.11 to 2.6.14 allows local users to cause a denial of service (hang) via 64-bit mmap calls that are not properly handled on a 32-bit system. |
| CVE-2005-3806 | The IPv6 flow label handling code (ip6_flowlabel.c) in Linux kernels 2.4 up to 2.4.32 and 2.6 before 2.6.14 modifies the wrong variable in certain circumstances, which allows local users to corrupt kernel memory or cause a denial of service (crash) by triggering a free of non-allocated memory. |
| CVE-2005-3805 | A locking problem in POSIX timer cleanup handling on exit in Linux kernel 2.6.10 to 2.6.14, when running on SMP systems, allows local users to cause a denial of service (deadlock) involving process CPU timers. |
| CVE-2005-3784 | The auto-reap of child processes in Linux kernel 2.6 before 2.6.15 includes processes with ptrace attached, which leads to a dangling ptrace reference and allows local users to cause a denial of service (crash) and gain root privileges. |
| CVE-2005-3783 | The ptrace functionality (ptrace.c) in Linux kernel 2.6 before 2.6.14.2, using CLONE_THREAD, does not use the thread group ID to check whether it is attaching to itself, which allows local users to cause a denial of service (crash). |
| CVE-2005-3753 | Linux kernel before after 2.6.12 and before 2.6.13.1 might allow attackers to cause a denial of service (Oops) via certain IPSec packets that cause alignment problems in standard multi-block cipher processors. NOTE: it is not clear whether this issue can be triggered by an attacker. |
| CVE-2005-3660 | Linux kernel 2.4 and 2.6 allows attackers to cause a denial of service (memory exhaustion and panic) by creating a large number of connected file descriptors or socketpairs and setting a large data transfer buffer, then preventing Linux from being able to finish the transfer by causing the process to become a zombie, or closing the file descriptor without closing an associated reference. |
| CVE-2005-3623 | nfs2acl.c in the Linux kernel 2.6.14.4 does not check for MAY_SATTR privilege before setting access controls (ACL) on files on exported NFS filesystems, which allows remote attackers to bypass ACLs for readonly mounted NFS filesystems. |
| CVE-2005-3527 | Race condition in do_coredump in signal.c in Linux kernel 2.6 allows local users to cause a denial of service by triggering a core dump in one thread while another thread has a pending SIGSTOP. |
| CVE-2005-3359 | The atm module in Linux kernel 2.6 before 2.6.14 allows local users to cause a denial of service (panic) via certain socket calls that produce inconsistent reference counts for loadable protocol modules. |
| CVE-2005-3358 | Linux kernel before 2.6.15 allows local users to cause a denial of service (panic) via a set_mempolicy call with a 0 bitmask, which causes a panic when a page fault occurs. |
| CVE-2005-3356 | The mq_open system call in Linux kernel 2.6.9, in certain situations, can decrement a counter twice ("double decrement") as a result of multiple calls to the mntput function when the dentry_open function call fails, which allows local users to cause a denial of service (panic) via unspecified attack vectors. |
| CVE-2005-3275 | The NAT code (1) ip_nat_proto_tcp.c and (2) ip_nat_proto_udp.c in Linux kernel 2.6 before 2.6.13 and 2.4 before 2.4.32-rc1 incorrectly declares a variable to be static, which allows remote attackers to cause a denial of service (memory corruption) by causing two packets for the same protocol to be NATed at the same time, which leads to memory corruption. |
| CVE-2005-3272 | Linux kernel before 2.6.12 allows remote attackers to poison the bridge forwarding table using frames that have already been dropped by filtering, which can cause the bridge to forward spoofed packets. |
| CVE-2005-3271 | Exec in Linux kernel 2.6 does not properly clear posix-timers in multi-threaded environments, which results in a resource leak and could allow a large number of multiple local users to cause a denial of service by using more posix-timers than specified by the quota for a single user. |
| CVE-2005-3257 | The VT implementation (vt_ioctl.c) in Linux kernel 2.6.12, and possibly other versions including 2.6.14.4, allows local users to use the KDSKBSENT ioctl on terminals of other users and gain privileges, as demonstrated by modifying key bindings using loadkeys. |
| CVE-2005-3181 | The audit system in Linux kernel 2.6.6, and other versions before 2.6.13.4, when CONFIG_AUDITSYSCALL is enabled, uses an incorrect function to free names_cache memory, which prevents the memory from being tracked by AUDITSYSCALL code and leads to a memory leak that allows attackers to cause a denial of service (memory consumption). |
| CVE-2005-3180 | The Orinoco driver (orinoco.c) in Linux kernel 2.6.13 and earlier does not properly clear memory from a previously used packet whose length is increased, which allows remote attackers to obtain sensitive information. |
| CVE-2005-3179 | drm.c in Linux kernel 2.6.10 to 2.6.13 creates a debug file in sysfs with world-readable and world-writable permissions, which allows local users to enable DRM debugging and obtain sensitive information. |
| CVE-2005-3119 | Memory leak in the request_key_auth_destroy function in request_key_auth in Linux kernel 2.6.10 up to 2.6.13 allows local users to cause a denial of service (memory consumption) via a large number of authorization token keys. |
| CVE-2005-3055 | Linux kernel 2.6.8 to 2.6.14-rc2 allows local users to cause a denial of service (kernel OOPS) via a userspace process that issues a USB Request Block (URB) to a USB device and terminates before the URB is finished, which leads to a stale pointer reference. |
| CVE-2005-3053 | The sys_set_mempolicy function in mempolicy.c in Linux kernel 2.6.x allows local users to cause a denial of service (kernel BUG()) via a negative first argument. |
| CVE-2005-3044 | Multiple vulnerabilities in Linux kernel before 2.6.13.2 allow local users to cause a denial of service (kernel OOPS from null dereference) via (1) fput in a 32-bit ioctl on 64-bit x86 systems or (2) sockfd_put in the 32-bit routing_ioctl function on 64-bit systems. |
| CVE-2005-2873 | The ipt_recent kernel module (ipt_recent.c) in Linux kernel 2.6.12 and earlier does not properly perform certain time tests when the jiffies value is greater than LONG_MAX, which can cause ipt_recent netfilter rules to block too early, a different vulnerability than CVE-2005-2872. |
| CVE-2005-2872 | The ipt_recent kernel module (ipt_recent.c) in Linux kernel before 2.6.12, when running on 64-bit processors such as AMD64, allows remote attackers to cause a denial of service (kernel panic) via certain attacks such as SSH brute force, which leads to memset calls using a length based on the u_int32_t type, acting on an array of unsigned long elements, a different vulnerability than CVE-2005-2873. |
| CVE-2005-2801 | xattr.c in the ext2 and ext3 file system code for Linux kernel 2.6 does not properly compare the name_index fields when sharing xattr blocks, which could prevent default ACLs from being applied. |
| CVE-2005-2800 | Memory leak in the seq_file implementation in the SCSI procfs interface (sg.c) in Linux kernel 2.6.13 and earlier allows local users to cause a denial of service (memory consumption) via certain repeated reads from the /proc/scsi/sg/devices file, which is not properly handled when the next() iterator returns NULL or an error. |
| CVE-2005-2709 | The sysctl functionality (sysctl.c) in Linux kernel before 2.6.14.1 allows local users to cause a denial of service (kernel oops) and possibly execute code by opening an interface file in /proc/sys/net/ipv4/conf/, waiting until the interface is unregistered, then obtaining and modifying function pointers in memory that was used for the ctl_table. |
| CVE-2005-2708 | The search_binary_handler function in exec.c in Linux 2.4 kernel on 64-bit x86 architectures does not check a return code for a particular function call when virtual memory is low, which allows local users to cause a denial of service (panic), as demonstrated by running a process using the bash ulimit -v command. |
| CVE-2005-2617 | The syscall32_setup_pages function in syscall32.c for Linux kernel 2.6.12 and later, on the 64-bit x86 platform, does not check the return value of the insert_vm_struct function, which allows local users to trigger a memory leak via a 32-bit application with crafted ELF headers. |
| CVE-2005-2555 | Linux kernel 2.6.x does not properly restrict socket policy access to users with the CAP_NET_ADMIN capability, which could allow local users to conduct unauthorized activities via (1) ipv4/ip_sockglue.c and (2) ipv6/ipv6_sockglue.c. |
| CVE-2005-2553 | The find_target function in ptrace32.c in the Linux kernel 2.4.x before 2.4.29 does not properly handle a NULL return value from another function, which allows local users to cause a denial of service (kernel crash/oops) by running a 32-bit ltrace program with the -i option on a 64-bit executable program. |
| CVE-2005-2548 | vlan_dev.c in the VLAN code for Linux kernel 2.6.8 allows remote attackers to cause a denial of service (kernel oops from null dereference) via certain UDP packets that lead to a function call with the wrong argument, as demonstrated using snmpwalk on snmpd. |
| CVE-2005-2500 | Buffer overflow in the xdr_xcode_array2 function in xdr.c in Linux kernel 2.6.12, as used in SuSE Linux Enterprise Server 9, might allow remote attackers to cause a denial of service and possibly execute arbitrary code via crafted XDR data for the nfsacl protocol. |
| CVE-2005-2492 | The raw_sendmsg function in the Linux kernel 2.6 before 2.6.13.1 allows local users to cause a denial of service (change hardware state) or read from arbitrary memory via crafted input. |
| CVE-2005-2490 | Stack-based buffer overflow in the sendmsg function call in the Linux kernel 2.6 before 2.6.13.1 allows local users to execute arbitrary code by calling sendmsg and modifying the message contents in another thread. |
| CVE-2005-2459 | The huft_build function in inflate.c in the zlib routines in the Linux kernel before 2.6.12.5 returns the wrong value, which allows remote attackers to cause a denial of service (kernel crash) via a certain compressed file that leads to a null pointer dereference, a different vulnerability than CVE-2005-2458. |
| CVE-2005-2458 | inflate.c in the zlib routines in the Linux kernel before 2.6.12.5 allows remote attackers to cause a denial of service (kernel crash) via a compressed file with "improper tables". |
| CVE-2005-2457 | The driver for compressed ISO file systems (zisofs) in the Linux kernel before 2.6.12.5 allows local users and remote attackers to cause a denial of service (kernel crash) via a crafted compressed ISO file system. |
| CVE-2005-2456 | Array index overflow in the xfrm_sk_policy_insert function in xfrm_user.c in Linux kernel 2.6 allows local users to cause a denial of service (oops or deadlock) and possibly execute arbitrary code via a p->dir value that is larger than XFRM_POLICY_OUT, which is used as an index in the sock->sk_policy array. |
| CVE-2005-2100 | The rw_vm function in usercopy.c in the 4GB split patch for the Linux kernel in Red Hat Enterprise Linux 4 does not perform proper bounds checking, which allows local users to cause a denial of service (crash). |
| CVE-2005-2099 | The Linux kernel before 2.6.12.5 does not properly destroy a keyring that is not instantiated properly, which allows local users or remote attackers to cause a denial of service (kernel oops) via a keyring with a payload that is not empty, which causes the creation to fail, leading to a null dereference in the keyring destructor. |
| CVE-2005-2098 | The KEYCTL_JOIN_SESSION_KEYRING operation in the Linux kernel before 2.6.12.5 contains an error path that does not properly release the session management semaphore, which allows local users or remote attackers to cause a denial of service (semaphore hang) via a new session keyring (1) with an empty name string, (2) with a long name string, (3) with the key quota reached, or (4) ENOMEM. |
| CVE-2005-1913 | The Linux kernel 2.6 before 2.6.12.1 allows local users to cause a denial of service (kernel panic) via a non group-leader thread executing a different program than was pending in itimer, which causes the signal to be delivered to the old group-leader task, which does not exist. |
| CVE-2005-1768 | Race condition in the ia32 compatibility code for the execve system call in Linux kernel 2.4 before 2.4.31 and 2.6 before 2.6.6 allows local users to cause a denial of service (kernel panic) and possibly execute arbitrary code via a concurrent thread that increments a pointer count after the nargs function has counted the pointers, but before the count is copied from user space to kernel space, which leads to a buffer overflow. |
| CVE-2005-1767 | traps.c in the Linux kernel 2.6.x and 2.4.x executes stack segment faults on an exception stack, which allows local users to cause a denial of service (oops and stack fault exception). |
| CVE-2005-1765 | syscall in the Linux kernel 2.6.8.1 and 2.6.10 for the AMD64 platform, when running in 32-bit compatibility mode, allows local users to cause a denial of service (kernel hang) via crafted arguments. |
| CVE-2005-1763 | Buffer overflow in ptrace in the Linux Kernel for 64-bit architectures allows local users to write bytes into kernel memory. |
| CVE-2005-1762 | The ptrace call in the Linux kernel 2.6.8.1 and 2.6.10 for the AMD64 platform allows local users to cause a denial of service (kernel crash) via a "non-canonical" address. |
| CVE-2005-1761 | Linux kernel 2.6 and 2.4 on the IA64 architecture allows local users to cause a denial of service (kernel crash) via ptrace and the restore_sigcontext function. |
| CVE-2005-1589 | The pkt_ioctl function in the pktcdvd block device ioctl handler (pktcdvd.c) in Linux kernel 2.6.12-rc4 and earlier calls the wrong function before passing an ioctl to the block device, which crosses security boundaries by making kernel address space accessible from user space and allows local users to cause a denial of service and possibly execute arbitrary code, a similar vulnerability to CVE-2005-1264. |
| CVE-2005-1368 | The key_user_lookup function in security/keys/key.c in Linux kernel 2.6.10 to 2.6.11.8 may allow attackers to cause a denial of service (oops) via SMP. |
| CVE-2005-1294 | The affix_sock_register in the Affix Bluetooth Protocol Stack for Linux might allow local users to gain privileges via a socket call with a negative protocol value, which is used as an array index. |
| CVE-2005-1265 | The mmap function in the Linux Kernel 2.6.10 can be used to create memory maps with a start address beyond the end address, which allows local users to cause a denial of service (kernel crash). |
| CVE-2005-1264 | Raw character devices (raw.c) in the Linux kernel 2.6.x call the wrong function before passing an ioctl to the block device, which crosses security boundaries by making kernel address space accessible from user space, a similar vulnerability to CVE-2005-1589. |
| CVE-2005-1263 | The elf_core_dump function in binfmt_elf.c for Linux kernel 2.x.x to 2.2.27-rc2, 2.4.x to 2.4.31-pre1, and 2.6.x to 2.6.12-rc4 allows local users to execute arbitrary code via an ELF binary that, in certain conditions involving the create_elf_tables function, causes a negative length argument to pass a signed integer comparison, leading to a buffer overflow. |
| CVE-2005-1041 | The fib_seq_start function in fib_hash.c in Linux kernel allows local users to cause a denial of service (system crash) via /proc/net/route. |
| CVE-2005-0977 | The shmem_nopage function in shmem.c for the tmpfs driver in Linux kernel 2.6 does not properly verify the address argument, which allows local users to cause a denial of service (kernel crash) via an invalid address. |
| CVE-2005-0937 | Some futex functions in futex.c for Linux kernel 2.6.x perform get_user calls while holding the mmap_sem semaphore, which could allow local users to cause a deadlock condition in do_page_fault by triggering get_user faults while another thread is executing mmap or other functions. |
| CVE-2005-0916 | AIO in the Linux kernel 2.6.11 on the PPC64 or IA64 architectures with CONFIG_HUGETLB_PAGE enabled allows local users to cause a denial of service (system panic) via a process that executes the io_queue_init function but exits without running io_queue_release, which causes exit_aio and is_hugepage_only_range to fail. |
| CVE-2005-0867 | Integer overflow in Linux kernel 2.6 allows local users to overwrite kernel memory by writing to a sysfs file. |
| CVE-2005-0839 | Linux kernel 2.6 before 2.6.11 does not restrict access to the N_MOUSE line discipline for a TTY, which allows local users to gain privileges by injecting mouse or keyboard events into other user sessions. |
| CVE-2005-0767 | Race condition in the Radeon DRI driver for Linux kernel 2.6.8.1 allows local users with DRI privileges to execute arbitrary code as root. |
| CVE-2005-0756 | ptrace in Linux kernel 2.6.8.1 does not properly verify addresses on the amd64 platform, which allows local users to cause a denial of service (kernel crash). |
| CVE-2005-0750 | The bluez_sock_create function in the Bluetooth stack for Linux kernel 2.4.6 through 2.4.30-rc1 and 2.6 through 2.6.11.5 allows local users to gain privileges via (1) socket or (2) socketpair call with a negative protocol value. |
| CVE-2005-0749 | The load_elf_library in the Linux kernel before 2.6.11.6 allows local users to cause a denial of service (kernel crash) via a crafted ELF library or executable, which causes a free of an invalid pointer. |
| CVE-2005-0736 | Integer overflow in sys_epoll_wait in eventpoll.c for Linux kernel 2.6 to 2.6.11 allows local users to overwrite kernel memory via a large number of events. |
| CVE-2005-0532 | The reiserfs_copy_from_user_to_file_region function in reiserfs/file.c for Linux kernel 2.6.10 and 2.6.11 before 2.6.11-rc4, when running on 64-bit architectures, may allow local users to trigger a buffer overflow as a result of casting discrepancies between size_t and int data types. |
| CVE-2005-0531 | The atm_get_addr function in addr.c for Linux kernel 2.6.10 and 2.6.11 before 2.6.11-rc4 may allow local users to trigger a buffer overflow via negative arguments. |
| CVE-2005-0530 | Signedness error in the copy_from_read_buf function in n_tty.c for Linux kernel 2.6.10 and 2.6.11rc1 allows local users to read kernel memory via a negative argument. |
| CVE-2005-0529 | Linux kernel 2.6.10 and 2.6.11rc1-bk6 uses different size types for offset arguments to the proc_file_read and locks_read_proc functions, which leads to a heap-based buffer overflow when a signed comparison causes negative integers to be used in a positive context. |
| CVE-2005-0504 | Buffer overflow in the MoxaDriverIoctl function for the moxa serial driver (moxa.c) in Linux 2.2.x, 2.4.x, and 2.6.x before 2.6.22 allows local users to execute arbitrary code via a certain modified length value. |
| CVE-2005-0489 | The /proc handling (proc/base.c) Linux kernel 2.4 before 2.4.17 allows local users to cause a denial of service via unknown vectors that cause an invalid access of free memory. |
| CVE-2005-0449 | The netfilter/iptables module in Linux before 2.6.8.1 allows remote attackers to cause a denial of service (kernel crash) or bypass firewall rules via crafted packets, which are not properly handled by the skb_checksum_help function. |
| CVE-2005-0400 | The ext2_make_empty function call in the Linux kernel before 2.6.11.6 does not properly initialize memory when creating a block for a new directory entry, which allows local users to obtain potentially sensitive information by reading the block. |
| CVE-2005-0384 | Unknown vulnerability in the PPP driver for the Linux kernel 2.6.8.1 allows remote attackers to cause a denial of service (kernel crash) via a pppd client. |
| CVE-2005-0210 | Netfilter in the Linux kernel 2.6.8.1 allows local users to cause a denial of service (memory consumption) via certain packet fragments that are reassembled twice, which causes a data structure to be allocated twice. |
| CVE-2005-0209 | Netfilter in Linux kernel 2.6.8.1 allows remote attackers to cause a denial of service (kernel crash) via crafted IP packet fragments. |
| CVE-2005-0207 | Unknown vulnerability in Linux kernel 2.4.x, 2.5.x, and 2.6.x allows NFS clients to cause a denial of service via O_DIRECT. |
| CVE-2005-0204 | Linux kernel before 2.6.9, when running on the AMD64 and Intel EM64T architectures, allows local users to write to privileged IO ports via the OUTS instruction. |
| CVE-2005-0180 | Multiple integer signedness errors in the sg_scsi_ioctl function in scsi_ioctl.c for Linux 2.6.x allow local users to read or modify kernel memory via negative integers in arguments to the scsi ioctl, which bypass a maximum length check before calling the copy_from_user and copy_to_user functions. |
| CVE-2005-0179 | Linux kernel 2.4.x and 2.6.x allows local users to cause a denial of service (CPU and memory consumption) and bypass RLIM_MEMLOCK limits via the mlockall call. |
| CVE-2005-0178 | Race condition in the setsid function in Linux before 2.6.8.1 allows local users to cause a denial of service (crash) and possibly access portions of kernel memory, related to TTY changes, locking, and semaphores. |
| CVE-2005-0177 | nls_ascii.c in Linux before 2.6.8.1 uses an incorrect table size, which allows attackers to cause a denial of service (kernel crash) via a buffer overflow. |
| CVE-2005-0176 | The shmctl function in Linux 2.6.9 and earlier allows local users to unlock the memory of other processes, which could cause sensitive memory to be swapped to disk, which could allow it to be read by other users once it has been released. |
| CVE-2005-0137 | Linux kernel 2.6 on Itanium (ia64) architectures allows local users to cause a denial of service via a "missing Itanium syscall table entry." |
| CVE-2005-0136 | The Linux kernel before 2.6.11 on the Itanium IA64 platform has certain "ptrace corner cases" that allow local users to cause a denial of service (crash) via crafted syscalls, possibly related to MCA/INIT, a different vulnerability than CVE-2005-1761. |
| CVE-2005-0135 | The unw_unwind_to_user function in unwind.c on Itanium (ia64) architectures in Linux kernel 2.6 allows local users to cause a denial of service (system crash). |
| CVE-2005-0124 | The coda_pioctl function in the coda functionality (pioctl.c) for Linux kernel 2.6.9 and 2.4.x before 2.4.29 may allow local users to cause a denial of service (crash) or execute arbitrary code via negative vi.in_size or vi.out_size values, which may trigger a buffer overflow. |
| CVE-2005-0092 | Unknown vulnerability in the Red Hat Enterprise Linux 4 kernel 4GB/4GB split patch, when running on x86 with the hugemem kernel, allows local users to cause a denial of service (crash). |
| CVE-2005-0091 | Unknown vulnerability in the Red Hat Enterprise Linux 4 kernel 4GB/4GB split patch, when using the hugemem kernel, allows local users to read and write to arbitrary kernel memory and gain privileges via certain syscalls. |
| CVE-2005-0090 | A regression error in the Red Hat Enterprise Linux 4 kernel 4GB/4GB split patch omits an "access check," which allows local users to cause a denial of service (crash). |
| CVE-2005-0003 | The 64 bit ELF support in Linux kernel 2.6 before 2.6.10, on 64-bit architectures, does not properly check for overlapping VMA (virtual memory address) allocations, which allows local users to cause a denial of service (system crash) or execute arbitrary code via a crafted ELF or a.out file. |
| CVE-2005-0001 | Race condition in the page fault handler (fault.c) for Linux kernel 2.2.x to 2.2.7, 2.4 to 2.4.29, and 2.6 to 2.6.10, when running on multiprocessor machines, allows local users to execute arbitrary code via concurrent threads that share the same virtual memory space and simultaneously request stack expansion. |
| CVE-2004-2731 | Multiple integer overflows in Sbus PROM driver (drivers/sbus/char/openprom.c) for the Linux kernel 2.4.x up to 2.4.27, 2.6.x up to 2.6.7, and possibly later versions, allow local users to execute arbitrary code by specifying (1) a small buffer size to the copyin_string function or (2) a negative buffer size to the copyin function. |
| CVE-2004-2660 | Memory leak in direct-io.c in Linux kernel 2.6.x before 2.6.10 allows local users to cause a denial of service (memory consumption) via certain O_DIRECT (direct IO) write requests. |
| CVE-2004-2613 | Unspecified vulnerability in procfs in the Linux-VServer stable branch for the 2.4 kernel before 1.23 and Linux-VServer development branch for the 2.4 kernel before 1.3.5 has unspecified impact and attack vectors, related to "write access to specific proc entries from a vserver context", a different vulnerability than CVE-2004-2408. |
| CVE-2004-2607 | A numeric casting discrepancy in sdla_xfer in Linux kernel 2.6.x up to 2.6.5 and 2.4 up to 2.4.29-rc1 allows local users to read portions of kernel memory via a large len argument, which is received as an int but cast to a short, which prevents a read loop from filling a buffer. |
| CVE-2004-2536 | The exit_thread function (process.c) in Linux kernel 2.6 through 2.6.5 does not invalidate the per-TSS io_bitmap pointers if a process obtains IO access permissions from the ioperm function but does not drop those permissions when it exits, which allows other processes to access the per-TSS pointers, access restricted memory locations, and possibly gain privileges. |
| CVE-2004-2302 | Race condition in the sysfs_read_file and sysfs_write_file functions in Linux kernel before 2.6.10 allows local users to read kernel memory and cause a denial of service (crash) via large offsets in sysfs files. |
| CVE-2004-2136 | dm-crypt on Linux kernel 2.6.x, when used on certain file systems with a block size 1024 or greater, has certain "IV computation" weaknesses that allow watermarked files to be detected without decryption. |
| CVE-2004-2135 | cryptoloop on Linux kernel 2.6.x, when used on certain file systems with a block size 1024 or greater, has certain "IV computation" weaknesses that allow watermarked files to be detected without decryption. |
| CVE-2004-2013 | Integer overflow in the SCTP_SOCKOPT_DEBUG_NAME SCTP socket option in socket.c in the Linux kernel 2.4.25 and earlier allows local users to execute arbitrary code via an optlen value of -1, which causes kmalloc to allocate 0 bytes of memory. |
| CVE-2004-1983 | The arch_get_unmapped_area function in mmap.c in the PaX patches for Linux kernel 2.6, when Address Space Layout Randomization (ASLR) is enabled, allows local users to cause a denial of service (infinite loop) via unknown attack vectors. |
| CVE-2004-1337 | The POSIX Capability Linux Security Module (LSM) for Linux kernel 2.6 does not properly handle the credentials of a process that is launched before the module is loaded, which allows local users to gain privileges. |
| CVE-2004-1335 | Memory leak in the ip_options_get function in the Linux kernel before 2.6.10 allows local users to cause a denial of service (memory consumption) by repeatedly calling the ip_cmsg_send function. |
| CVE-2004-1334 | Integer overflow in the ip_options_get function in the Linux kernel before 2.6.10 allows local users to cause a denial of service (kernel crash) via a cmsg_len that contains a -1, which leads to a buffer overflow. |
| CVE-2004-1333 | Integer overflow in the vc_resize function in the Linux kernel 2.4 and 2.6 before 2.6.10 allows local users to cause a denial of service (kernel crash) via a short new screen value, which leads to a buffer overflow. |
| CVE-2004-1235 | Race condition in the (1) load_elf_library and (2) binfmt_aout function calls for uselib in Linux kernel 2.4 through 2.429-rc2 and 2.6 through 2.6.10 allows local users to execute arbitrary code by manipulating the VMA descriptor. |
| CVE-2004-1151 | Multiple buffer overflows in the (1) sys32_ni_syscall and (2) sys32_vm86_warning functions in sys_ia32.c for Linux 2.6.x may allow local attackers to modify kernel memory and gain privileges. |
| CVE-2004-1137 | Multiple vulnerabilities in the IGMP functionality for Linux kernel 2.4.22 to 2.4.28, and 2.6.x to 2.6.9, allow local and remote attackers to cause a denial of service or execute arbitrary code via (1) the ip_mc_source function, which decrements a counter to -1, or (2) the igmp_marksources function, which does not properly validate IGMP message parameters and performs an out-of-bounds read. |
| CVE-2004-1074 | The binfmt functionality in the Linux kernel, when "memory overcommit" is enabled, allows local users to cause a denial of service (kernel oops) via a malformed a.out binary. |
| CVE-2004-1073 | The open_exec function in the execve functionality (exec.c) in Linux kernel 2.4.x up to 2.4.27, and 2.6.x up to 2.6.8, allows local users to read non-readable ELF binaries by using the interpreter (PT_INTERP) functionality. |
| CVE-2004-1072 | The binfmt_elf loader (binfmt_elf.c) in Linux kernel 2.4.x up to 2.4.27, and 2.6.x up to 2.6.8, may create an interpreter name string that is not NULL terminated, which could cause strings longer than PATH_MAX to be used, leading to buffer overflows that allow local users to cause a denial of service (hang) and possibly execute arbitrary code. |
| CVE-2004-1071 | The binfmt_elf loader (binfmt_elf.c) in Linux kernel 2.4.x up to 2.4.27, and 2.6.x up to 2.6.8, does not properly handle a failed call to the mmap function, which causes an incorrect mapped image and may allow local users to execute arbitrary code. |
| CVE-2004-1070 | The load_elf_binary function in the binfmt_elf loader (binfmt_elf.c) in Linux kernel 2.4.x up to 2.4.27, and 2.6.x up to 2.6.8, does not properly check return values from calls to the kernel_read function, which may allow local users to modify sensitive memory in a setuid program and execute arbitrary code. |
| CVE-2004-1069 | Race condition in SELinux 2.6.x through 2.6.9 allows local users to cause a denial of service (kernel crash) via SOCK_SEQPACKET unix domain sockets, which are not properly handled in the sock_dgram_sendmsg function. |
| CVE-2004-1068 | A "missing serialization" error in the unix_dgram_recvmsg function in Linux 2.4.27 and earlier, and 2.6.x up to 2.6.9, allows local users to gain privileges via a race condition. |
| CVE-2004-1058 | Race condition in Linux kernel 2.6 allows local users to read the environment variables of another process that is still spawning via /proc/.../cmdline. |
| CVE-2004-1057 | Multiple drivers in Linux kernel 2.4.19 and earlier do not properly mark memory with the VM_IO flag, which causes incorrect reference counts and may lead to a denial of service (kernel panic) when accessing freed kernel pages. |
| CVE-2004-1056 | Direct Rendering Manager (DRM) driver in Linux kernel 2.6 does not properly check the DMA lock, which could allow remote attackers or local users to cause a denial of service (X Server crash) and possibly modify the video output. |
| CVE-2004-1017 | Multiple "overflows" in the io_edgeport driver for Linux kernel 2.4.x have unknown impact and unknown attack vectors. |
| CVE-2004-1016 | The scm_send function in the scm layer for Linux kernel 2.4.x up to 2.4.28, and 2.6.x up to 2.6.9, allows local users to cause a denial of service (system hang) via crafted auxiliary messages that are passed to the sendmsg function, which causes a deadlock condition. |
| CVE-2004-0997 | Unspecified vulnerability in the ptrace MIPS assembly code in Linux kernel 2.4 before 2.4.17 allows local users to gain privileges via unknown vectors. |
| CVE-2004-0949 | The smb_recv_trans2 function call in the samba filesystem (smbfs) in Linux kernel 2.4 and 2.6 does not properly handle the re-assembly of fragmented packets correctly, which could allow remote samba servers to (1) read arbitrary kernel information or (2) raise a counter value to an arbitrary number by sending the first part of the fragmented packet multiple times. |
| CVE-2004-0883 | Multiple vulnerabilities in the samba filesystem (smbfs) in Linux kernel 2.4 and 2.6 allow remote samba servers to cause a denial of service (crash) or gain sensitive information from kernel memory via a samba server (1) returning more data than requested to the smb_proc_read function, (2) returning a data offset from outside the samba packet to the smb_proc_readX function, (3) sending a certain TRANS2 fragmented packet to the smb_receive_trans2 function, (4) sending a samba packet with a certain header size to the smb_proc_readX_data function, or (5) sending a certain packet based offset for the data in a packet to the smb_receive_trans2 function. |
| CVE-2004-0814 | Multiple race conditions in the terminal layer in Linux 2.4.x, and 2.6.x before 2.6.9, allow (1) local users to obtain portions of kernel data via a TIOCSETD ioctl call to a terminal interface that is being accessed by another thread, or (2) remote attackers to cause a denial of service (panic) by switching from console to PPP line discipline, then quickly sending data that is received during the switch. |
| CVE-2004-0812 | Unknown vulnerability in the Linux kernel before 2.4.23, on the AMD AMD64 and Intel EM64T architectures, associated with "setting up TSS limits," allows local users to cause a denial of service (crash) and possibly execute arbitrary code. |
| CVE-2004-0685 | Certain USB drivers in the Linux 2.4 kernel use the copy_to_user function on uninitialized structures, which could allow local users to obtain sensitive information by reading memory that was not cleared from previous usage. |
| CVE-2004-0658 | Integer overflow in the hpsb_alloc_packet function (incorrectly reported as alloc_hpsb_packet) in IEEE 1394 (Firewire) driver 2.4 and 2.6 allows local users to cause a denial of service (crash) and possibly execute arbitrary code via the functions (1) raw1394_write, (2) state_connected, (3) handle_remote_request, or (4) hpsb_make_writebpacket. |
| CVE-2004-0626 | The tcp_find_option function of the netfilter subsystem in Linux kernel 2.6, when using iptables and TCP options rules, allows remote attackers to cause a denial of service (CPU consumption by infinite loop) via a large option length that produces a negative integer after a casting operation to the char type. |
| CVE-2004-0602 | The binary compatibility mode for FreeBSD 4.x and 5.x does not properly handle certain Linux system calls, which could allow local users to access kernel memory to gain privileges or cause a system panic. |
| CVE-2004-0596 | The Equalizer Load-balancer for serial network interfaces (eql.c) in Linux kernel 2.6.x up to 2.6.7 allows local users to cause a denial of service via a non-existent device name that triggers a null dereference. |
| CVE-2004-0592 | The tcp_find_option function of the netfilter subsystem for IPv6 in the SUSE Linux 2.6.5 kernel with USAGI patches, when using iptables and TCP options rules, allows remote attackers to cause a denial of service (CPU consumption by infinite loop) via a large option length that produces a negative integer after a casting operation to the char type, a similar flaw to CVE-2004-0626. |
| CVE-2004-0554 | Linux kernel 2.4.x and 2.6.x for x86 allows local users to cause a denial of service (system crash), possibly via an infinite loop that triggers a signal handler with a certain sequence of fsave and frstor instructions, as originally demonstrated using a "crash.c" program. |
| CVE-2004-0535 | The e1000 driver for Linux kernel 2.4.26 and earlier does not properly initialize memory before using it, which allows local users to read portions of kernel memory. NOTE: this issue was originally incorrectly reported as a "buffer overflow" by some sources. |
| CVE-2004-0497 | Unknown vulnerability in Linux kernel 2.x may allow local users to modify the group ID of files, such as NFS exported files in kernel 2.4. |
| CVE-2004-0496 | Multiple unknown vulnerabilities in Linux kernel 2.6 allow local users to gain privileges or access kernel memory, a different set of vulnerabilities than those identified in CVE-2004-0495, as found by the Sparse source code checking tool. |
| CVE-2004-0495 | Multiple unknown vulnerabilities in Linux kernel 2.4 and 2.6 allow local users to gain privileges or access kernel memory, as found by the Sparse source code checking tool. |
| CVE-2004-0424 | Integer overflow in the ip_setsockopt function in Linux kernel 2.4.22 through 2.4.25 and 2.6.1 through 2.6.3 allows local users to cause a denial of service (crash) or execute arbitrary code via the MCAST_MSFILTER socket option. |
| CVE-2004-0415 | Linux kernel does not properly convert 64-bit file offset pointers to 32 bits, which allows local users to access portions of kernel memory. |
| CVE-2004-0394 | A "potential" buffer overflow exists in the panic() function in Linux 2.4.x, although it may not be exploitable due to the functionality of panic. |
| CVE-2004-0229 | The framebuffer driver in Linux kernel 2.6.x does not properly use the fb_copy_cmap function, with unknown impact. |
| CVE-2004-0228 | Integer signedness error in the cpufreq proc handler (cpufreq_procctl) in Linux kernel 2.6 allows local users to gain privileges. |
| CVE-2004-0186 | smbmnt in Samba 2.x and 3.x on Linux 2.6, when installed setuid, allows local users to gain root privileges by mounting a Samba share that contains a setuid root program, whose setuid attributes are not cleared when the share is mounted. |
| CVE-2004-0177 | The ext3 code in Linux 2.4.x before 2.4.26 does not properly initialize journal descriptor blocks, which causes an information leak in which in-memory data is written to the device for the ext3 file system, which allows privileged users to obtain portions of kernel memory by reading the raw device. |
| CVE-2004-0138 | The ELF loader in Linux kernel 2.4 before 2.4.25 allows local users to cause a denial of service (crash) via a crafted ELF file with an interpreter with an invalid arch (architecture), which triggers a BUG() when an invalid VMA is unmapped. |
| CVE-2004-0109 | Buffer overflow in the ISO9660 file system component for Linux kernel 2.4.x, 2.5.x and 2.6.x, allows local users with physical access to overflow kernel memory and execute arbitrary code via a malformed CD containing a long symbolic link entry. |
| CVE-2004-0075 | The Vicam USB driver in Linux before 2.4.25 does not use the copy_from_user function when copying data from userspace to kernel space, which crosses security boundaries and allows local users to cause a denial of service. |
| CVE-2004-0010 | Stack-based buffer overflow in the ncp_lookup function for ncpfs in Linux kernel 2.4.x allows local users to gain privileges. |
| CVE-2004-0003 | Unknown vulnerability in Linux kernel before 2.4.22 allows local users to gain privileges, related to "R128 DRI limits checking." |
| CVE-2004-0001 | Unknown vulnerability in the eflags checking in the 32-bit ptrace emulation for the Linux kernel on AMD64 systems allows local users to gain privileges. |
| CVE-2003-1604 | The redirect_target function in net/ipv4/netfilter/ipt_REDIRECT.c in the Linux kernel before 2.6.0 allows remote attackers to cause a denial of service (NULL pointer dereference and OOPS) by sending packets to an interface that has a 0.0.0.0 IP address, a related issue to CVE-2015-8787. |
| CVE-2003-1288 | Multiple race conditions in Linux-VServer 1.22 with Linux kernel 2.4.23 and SMP allow local users to cause a denial of service (kernel oops) via unknown attack vectors related to the (1) s_info and (2) ip_info data structures and the (a) forget_original_parent, (b) goodness, (c) schedule, (d) update_process_times, and (e) vc_new_s_context functions. |
| CVE-2003-1161 | exit.c in Linux kernel 2.6-test9-CVS, as stored on kernel.bkbits.net, was modified to contain a backdoor, which could allow local users to elevate their privileges by passing __WCLONE|__WALL to the sys_wait4 function. |
| CVE-2003-1040 | kmod in the Linux kernel does not set its uid, suid, gid, or sgid to 0, which allows local users to cause a denial of service (crash) by sending certain signals to kmod. |
| CVE-2003-0986 | Various routines for the ppc64 architecture on Linux kernel 2.6 prior to 2.6.2 and 2.4 prior to 2.4.24 do not use the copy_from_user function when copying data from userspace to kernelspace, which crosses security boundaries and allows local users to cause a denial of service. |
| CVE-2003-0985 | The mremap system call (do_mremap) in Linux kernel 2.4.x before 2.4.21, and possibly other versions before 2.4.24, does not properly perform bounds checks, which allows local users to cause a denial of service and possibly gain privileges by causing a remapping of a virtual memory area (VMA) to create a zero length VMA, a different vulnerability than CAN-2004-0077. |
| CVE-2003-0984 | Real time clock (RTC) routines in Linux kernel 2.4.23 and earlier do not properly initialize their structures, which could leak kernel data to user space. |
| CVE-2003-0961 | Integer overflow in the do_brk function for the brk system call in Linux kernel 2.4.22 and earlier allows local users to gain root privileges. |
| CVE-2003-0959 | Multiple integer overflows in the 32bit emulation for AMD64 architectures in Linux 2.4 kernel before 2.4.21 allows attackers to cause a denial of service or gain root privileges via unspecified vectors that trigger copy_from_user function calls with improper length arguments. |
| CVE-2003-0956 | Multiple race conditions in the handling of O_DIRECT in Linux kernel prior to version 2.4.22 could cause stale data to be returned from the disk when handling sparse files, or cause incorrect data to be returned when a file is truncated as it is being read, which might allow local users to obtain sensitive data that was originally owned by other users, a different vulnerability than CVE-2003-0018. |
| CVE-2003-0619 | Integer signedness error in the decode_fh function of nfs3xdr.c in Linux kernel before 2.4.21 allows remote attackers to cause a denial of service (kernel panic) via a negative size value within XDR data of an NFSv3 procedure call. |
| CVE-2003-0465 | The kernel strncpy function in Linux 2.4 and 2.5 does not %NUL pad the buffer on architectures other than x86, as opposed to the expected behavior of strncpy as implemented in libc, which could lead to information leaks. |
| CVE-2003-0464 | The RPC code in Linux kernel 2.4 sets the reuse flag when sockets are created, which could allow local users to bind to UDP ports that are used by privileged services such as nfsd. |
| CVE-2003-0418 | The Linux 2.0 kernel IP stack does not properly calculate the size of an ICMP citation, which causes it to include portions of unauthorized memory in ICMP error responses. |
| CVE-2003-0364 | The TCP/IP fragment reassembly handling in the Linux kernel 2.4 allows remote attackers to cause a denial of service (CPU consumption) via certain packets that cause a large number of hash table collisions. |
| CVE-2003-0248 | The mxcsr code in Linux kernel 2.4 allows attackers to modify CPU state registers via a malformed address. |
| CVE-2003-0247 | Unknown vulnerability in the TTY layer of the Linux kernel 2.4 allows attackers to cause a denial of service ("kernel oops"). |
| CVE-2003-0246 | The ioperm system call in Linux kernel 2.4.20 and earlier does not properly restrict privileges, which allows local users to gain read or write access to certain I/O ports. |
| CVE-2003-0127 | The kernel module loader in Linux kernel 2.2.x before 2.2.25, and 2.4.x before 2.4.21, allows local users to gain root privileges by using ptrace to attach to a child process that is spawned by the kernel. |
| CVE-2003-0019 | uml_net in the kernel-utils package for Red Hat Linux 8.0 has incorrect setuid root privileges, which allows local users to modify network interfaces, e.g. by modifying ARP entries or placing interfaces into promiscuous mode. |
| CVE-2003-0018 | Linux kernel 2.4.10 through 2.4.21-pre4 does not properly handle the O_DIRECT feature, which allows local attackers with write privileges to read portions of previously deleted files, or cause file system corruption. |
| CVE-2002-2438 | TCP firewalls could be circumvented by sending a SYN Packets with other flags (like e.g. RST flag) set, which was not correctly discarded by the Linux TCP stack after firewalling. |
| CVE-2002-2254 | The experimental IP packet queuing feature in Netfilter / IPTables in Linux kernel 2.4 up to 2.4.19 and 2.5 up to 2.5.31, when a privileged process exits and network traffic is not being queued, may allow a later process with the same Process ID (PID) to access certain network traffic that would otherwise be restricted. |
| CVE-2002-2016 | User-mode Linux (UML) 2.4.17-8 does not restrict access to kernel address space, which allows local users to execute arbitrary code. |
| CVE-2002-1976 | ifconfig, when used on the Linux kernel 2.2 and later, does not report when the network interface is in promiscuous mode if it was put in promiscuous mode using PACKET_MR_PROMISC, which could allow attackers to sniff the network without detection, as demonstrated using libpcap. |
| CVE-2002-1963 | Linux kernel 2.4.1 through 2.4.19 sets root's NR_RESERVED_FILES limit to 10 files, which allows local users to cause a denial of service (resource exhaustion) by opening 10 setuid binaries. |
| CVE-2002-1826 | grsecurity 1.9.4 for Linux kernel 2.4.18 allows local users to bypass read-only permissions by using mmap to directly map /dev/mem or /dev/kmem to kernel memory. |
| CVE-2002-1573 | Unspecified vulnerability in the pcilynx ieee1394 firewire driver (pcilynx.c) in Linux kernel before 2.4.20 has unknown impact and attack vectors, related to "wrap handling." |
| CVE-2002-1572 | Signed integer overflow in the bttv_read function in the bttv driver (bttv-driver.c) in Linux kernel before 2.4.20 has unknown impact and attack vectors. |
| CVE-2002-1571 | The linux 2.4 kernel before 2.4.19 assumes that the fninit instruction clears all registers, which could lead to an information leak on processors that do not clear all relevant SSE registers. |
| CVE-2002-1380 | Linux kernel 2.2.x allows local users to cause a denial of service (crash) by using the mmap() function with a PROT_READ parameter to access non-readable memory pages through the /proc/pid/mem interface. |
| CVE-2002-1319 | The Linux kernel 2.4.20 and earlier, and 2.5.x, when running on x86 systems, allows local users to cause a denial of service (hang) via the emulation mode, which does not properly clear TF and NT EFLAGs. |
| CVE-2002-0820 | FreeBSD kernel 4.6 and earlier closes the file descriptors 0, 1, and 2 after they have already been assigned to /dev/null when the descriptors reference procfs or linprocfs, which could allow local users to reuse the file descriptors in a setuid or setgid program to modify critical data and gain privileges. |
| CVE-2002-0570 | The encrypted loop device in Linux kernel 2.4.10 and earlier does not authenticate the entity that is encrypting data, which allows local users to modify encrypted data without knowing the key. |
| CVE-2002-0510 | The UDP implementation in Linux 2.4.x kernels keeps the IP Identification field at 0 for all non-fragmented packets, which could allow remote attackers to determine that a target system is running Linux. |
| CVE-2002-0499 | The d_path function in Linux kernel 2.2.20 and earlier, and 2.4.18 and earlier, truncates long pathnames without generating an error, which could allow local users to force programs to perform inappropriate operations on the wrong directories. |
| CVE-2002-0429 | The iBCS routines in arch/i386/kernel/traps.c for Linux kernels 2.4.18 and earlier on x86 systems allow local users to kill arbitrary processes via a a binary compatibility interface (lcall). |
| CVE-2002-0046 | Linux kernel, and possibly other operating systems, allows remote attackers to read portions of memory via a series of fragmented ICMP packets that generate an ICMP TTL Exceeded response, which includes portions of the memory in the response packet. |
| CVE-2001-1572 | The MAC module in Netfilter in Linux kernel 2.4.1 through 2.4.11, when configured to filter based on MAC addresses, allows remote attackers to bypass packet filters via small packets. |
| CVE-2001-1551 | Linux kernel 2.2.19 enables CAP_SYS_RESOURCE for setuid processes, which allows local users to exceed disk quota restrictions during execution of setuid programs. |
| CVE-2001-1400 | Unknown vulnerabilities in the UDP port allocation for Linux kernel before 2.2.19 could allow local users to cause a denial of service (deadlock). |
| CVE-2001-1399 | Certain operations in Linux kernel before 2.2.19 on the x86 architecture copy the wrong number of bytes, which might allow attackers to modify memory, aka "User access asm bug on x86." |
| CVE-2001-1398 | Masquerading code for Linux kernel before 2.2.19 does not fully check packet lengths in certain cases, which may lead to a vulnerability. |
| CVE-2001-1397 | The System V (SYS5) shared memory implementation for Linux kernel before 2.2.19 could allow attackers to modify recently freed memory. |
| CVE-2001-1396 | Unknown vulnerabilities in strnlen_user for Linux kernel before 2.2.19, with unknown impact. |
| CVE-2001-1395 | Unknown vulnerability in sockfilter for Linux kernel before 2.2.19 related to "boundary cases," with unknown impact. |
| CVE-2001-1394 | Signedness error in (1) getsockopt and (2) setsockopt for Linux kernel before 2.2.19 allows local users to cause a denial of service. |
| CVE-2001-1393 | Unknown vulnerability in classifier code for Linux kernel before 2.2.19 could result in denial of service (hang). |
| CVE-2001-1392 | The Linux kernel before 2.2.19 does not have unregister calls for (1) CPUID and (2) MSR drivers, which could cause a DoS (crash) by unloading and reloading the drivers. |
| CVE-2001-1391 | Off-by-one vulnerability in CPIA driver of Linux kernel before 2.2.19 allows users to modify kernel memory. |
| CVE-2001-1390 | Unknown vulnerability in binfmt_misc in the Linux kernel before 2.2.19, related to user pages. |
| CVE-2001-1273 | The "mxcsr P4" vulnerability in the Linux kernel before 2.2.17-14, when running on certain Intel CPUs, allows local users to cause a denial of service (system halt). |
| CVE-2001-1056 | IRC DCC helper in the ip_masq_irc IP masquerading module 2.2 allows remote attackers to bypass intended firewall restrictions by causing the target system to send a "DCC SEND" request to a malicious server which listens on port 6667, which may cause the module to believe that the traffic is a valid request and allow the connection to the port specified in the DCC SEND request. |
| CVE-2001-0914 | Linux kernel before 2.4.11pre3 in multiple Linux distributions allows local users to cause a denial of service (crash) by starting the core vmlinux kernel, possibly related to poor error checking during ELF loading. |
| CVE-2001-0907 | Linux kernel 2.2.1 through 2.2.19, and 2.4.1 through 2.4.10, allows local users to cause a denial of service via a series of deeply nested symlinks, which causes the kernel to spend extra time when trying to access the link. |
| CVE-2001-0859 | 2.4.3-12 kernel in Red Hat Linux 7.1 Korean installation program sets the setting default umask for init to 000, which installs files with world-writeable permissions. |
| CVE-2001-0851 | Linux kernel 2.0, 2.2 and 2.4 with syncookies enabled allows remote attackers to bypass firewall rules by brute force guessing the cookie. |
| CVE-2001-0468 | Buffer overflow in FTPFS allows local users to gain root privileges via a long user name. |
| CVE-2001-0317 | Race condition in ptrace in Linux kernel 2.4 and 2.2 allows local users to gain privileges by using ptrace to track and modify a running setuid process. |
| CVE-2001-0316 | Linux kernel 2.4 and 2.2 allows local users to read kernel memory and possibly gain privileges via a negative argument to the sysctl call. |
| CVE-2000-0867 | Kernel logging daemon (klogd) in Linux does not properly cleanse user-injected format strings, which allows local users to gain root privileges by triggering malformed kernel messages. |
| CVE-2000-0747 | The logrotate script for OpenLDAP before 1.2.11 in Conectiva Linux sends an improper signal to the kernel log daemon (klogd) and kills it. |
| CVE-2000-0506 | The "capabilities" feature in Linux before 2.2.16 allows local users to cause a denial of service or gain privileges by setting the capabilities to prevent a setuid program from dropping privileges, aka the "Linux kernel setuid/setcap vulnerability." |
| CVE-2000-0344 | The knfsd NFS server in Linux kernel 2.2.x allows remote attackers to cause a denial of service via a negative size value. |
| CVE-2000-0289 | IP masquerading in Linux 2.2.x allows remote attackers to route UDP packets through the internal interface by modifying the external source IP address and port number to match those of an established connection. |
| CVE-2000-0274 | The Linux trustees kernel patch allows attackers to cause a denial of service by accessing a file or directory with a long name. |
| CVE-2000-0227 | The Linux 2.2.x kernel does not restrict the number of Unix domain sockets as defined by the wmem_max parameter, which allows local users to cause a denial of service by requesting a large number of sockets. |
| CVE-1999-1406 | dumpreg in Red Hat Linux 5.1 opens /dev/mem with O_RDWR access, which allows local users to cause a denial of service (crash) by redirecting fd 1 (stdout) to the kernel. |
| CVE-1999-1387 | Windows NT 4.0 SP2 allows remote attackers to cause a denial of service (crash), possibly via malformed inputs or packets, such as those generated by a Linux smbmount command that was compiled on the Linux 2.0.29 kernel but executed on Linux 2.0.25. |
| CVE-1999-1341 | Linux kernel before 2.3.18 or 2.2.13pre15, with SLIP and PPP options, allows local unprivileged users to forge IP packets via the TIOCSETD option on tty devices. |
| CVE-1999-1339 | Vulnerability when Network Address Translation (NAT) is enabled in Linux 2.2.10 and earlier with ipchains, or FreeBSD 3.2 with ipfw, allows remote attackers to cause a denial of service (kernel panic) via a ping -R (record route) command. |
| CVE-1999-1166 | Linux 2.0.37 does not properly encode the Custom segment limit, which allows local users to gain root privileges by accessing and modifying kernel memory. |
| CVE-1999-0804 | Denial of service in Linux 2.2.x kernels via malformed ICMP packets containing unusual types, codes, and IP header lengths. |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
