Unit is brand new but never installed.
Arm is not attached and is not included.
Faded from being stored outside.
HySecurity StrongArm HTG320-3ST 20 Industrial Barrier Arm Opener
The StrongArm 20 is an industrial barrier arm operator designed and manufactured by HySecurity.
Capable of lifting a 20ft barrier arm to 90° in just 3 seconds, this barrier arm is made with security and accessibility in mind.
Arm remains vertical when held open.
The side mount can hold arms up to 18ft in length while the center yoke mount is capable of supporting a 20ft arm.
Aluminum or fiberglass arms options available.
Keyed T-lock protects all electrical controls and parts in secure uni-body 10 gauge welded and zinc plated steel chassis.
Featured:
Duty Cycle: 2,000 cycles/day
Horsepower: 3/4hp
Drive: Hydraulic
Open/Close Time: 3s open/4s close
Arm Length Max*: Up to 20ft*, Side mount available for arms up to 18ft
Arm Design: Side mount - aluminum up to 18 ft, fiberglass up to 16 ft or wood up to 14 ft.
Center yoke mount - aluminum up to 20 ft
Full Open Angle: 90°
Temperature Rating: -40° to 158° F No heater necessary
1 Phase Power: 115/208/230V 60 Hz, 110/220V 50 Hz
3 Phase Power: 208/230/460 or 575V † 60 Hz, 220/380V 50 Hz
Communication: RS-232, RS-485, Ethernet/fiber using optional HyNet Gateway Accessory
User Controls: Smart Touch Controller with 70+ configurable settings.
Smart Touch keypad and display or a PC using S.
T.
A.
R.
T.
software.
Relays: Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs
Finish: Zinc plated with yellow powder coating
Listed to UL: Usage Class I, II, III, IV
Whatsapp
