Qualification Highlights
Must have 4+ years’ experience as a Boilermaker Helper, Boilermaker
Experience in Petro Chem or Refinery
Must possess all Knowledge Skills and Abilities for positions (see below).
Must be able to meet all physical requirements.
Must be able to work at heights in excess of 300 ft.
Must have all required tools.
Must have reliable transportation.
Must be able to pass all pre-employment contingencies to include but not limited to physical, drug screen and MVR.
Position Responsibilities
Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required.
Identify all tools required for tasks.
Identify safety risks and the precautions required to eliminate those risks.
Fabricate equipment according to blueprints or instructions from supervisors.
Hoist equipment and tools into location via bull rigging or crane.
Verify vertical and horizontal alignment of structural-steel members, using plumb bobs, laser equipment, transits, and/or levels.
Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
Bolt aligned structural-steel members in position for permanent riveting or bolting.
Pull, push, or pry iron/steel equipment into approximate positions for bolting into place.
Cut, bend, and weld iron/steel pieces, using metal shears, torches, and welding equipment.
JOB REQUIREMENTS
Required Qualifications
Leadership Abilities
Ability to take lead in erection of steel, fabrication, grid layout, rigging etc.
Ability to perform all job duties of craft trade.
Drawings
Ability to read, understand IFC drawings.
Ability to make hang list, read details off drawings, read all notes on drawings before erection, locate and understand ECN’s and holds on drawings.
Understand when to stop production work and when a RFI needs to be initiated.
Read and understand craft specs and cut sheets, craft spec procedures and recommendations.
Able to locate piece marks for correct views and know how to pick out different elevations.
Being able to know the correct installation based on the orientation.
Knowledge of symbols based on legend.
Rigging
Knowledge of all types of safe rigging practices (chokers, slings, ect.
)
Ability to dictate correct knots based on material.
Connection
Know all aspects of connecting.
Correct procedures of Bolting
Torque vs Tension
Fabrication
Ability to read cut sheets.
Lay out from drawing.
Cut material from lay out and cut sheets.
Torque vs.
Tension
Knowledge of Torque and Values
Knowledge of Tension
Turn of the nut method
Different types of indicators
Understand how to use a skidmore
Plan work and execute.
Ability to take drawings, required material, line out helpers and execute work
Tools and knowledge
Knowledge of specialty tools (torque wrench, skidmore, torque guns, mag drills, hogan drills)
Welding and cutting
Basic knowledge of welding (machine set up, Mig, stick, gas, ect)
Knowledge of cutting torch, set up, dangers, usage, cleaning, types of tips and when to use the different types of tips
Equipment Knowledge
Knowledge of JLG’s man baskets, cranes
Basic maintenance (inspections)
Safe operations practices
Math Skills
Footage, addition, subtraction, multiplication, division, fractions to perform all craft duties.
Must be willing to perform any additional duties as instructed.
ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.
Whatsapp
