Cold Jet Australia Pty Ltd

As the race stops the nation, we're here to keep things frosty. Cold Jet has you covered with cleaning solutions and industrial-grade performance, ensuring you stay cool no matter the heat of the competition. Enjoy the day and remember, we're always a step ahead! hashtag #MelbourneCup hashtag #ColdJetAustralia hashtag #StayCool

Cold Jet Deburring & Deflashing - Dry Ice Blasting Cleaning with Cold Jet Dry Ice Blasting Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #Deflashing #ColdJetAustralia #DryIceBlasting

Cold Jet Dry Ice Cleaning Technology in the power generation industry is ideal for Surface Preparation and performs NDT procedures. In this case, The Forced Draft Fan (FDF) blades are required to perform major maintenance shutdown, therefore, the build-up that is causing vibrations in the system has to be removed without damaging the surface and later on conduct NDT testing procedures. Dry ice cleaning is a non-abrasive, non-flammable and non-conductive cleaning method. It is environmentally-friendly and contains no secondary contaminants such as solvents or grit media. It allows items to be cleaned in place without time-consuming disassembly. It can be used to remove production residues, release agents, contaminants, paints, oils and biofilms and for many general cleaning applications Traditional cleaning methods are time-consuming and tedious, not to mention ineffective for complete removal. Dry ice cleaning is up to three times faster than traditional methods!!!. Cleaning with Cold Jet Dry Ice Blasting Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #ForcedDraftFanBlades #DryIceBlasting #ColdJetAustralia

Polyurethane foam is a TOUGH contaminant which is why we covered a Harley with it to demonstrate the power of dry ice cleaning. The dry ice cleaning process removed the foam from a variety of surfaces, including plastic, chrome, metal, rubber and glass without damaging them. Cleaning with Cold Jet Dry Ice Blasting Technology Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #ColdJetAustralia #DryIceBlasting #HarleyDavidson

Dry ice blasting is a fast, efficient, and non-abrasive cleaning process that uses dry ice that sublimates into a gas on impact, allowing the user to clean packaging equipment fast and in place without cleaning up secondary waste. Dry ice cleaning is similar to sand, bead and soda blasting in that it prepares and cleans surfaces using a media accelerated in a pressurized air stream. It differs in that dry ice cleaning uses solid CO2 pellets or MicroParticles, which are blasted at supersonic speeds and sublimate on impact, lifting dirt and contaminants off the underlying substrate. Cleaning with Cold Jet Dry Ice Blasting Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #FoodIndustry #ColdJetAustralia #DryIceBlasting

How do you remove asphalt from paving equipment and trucks? Dry ice blasting is the fastest and cheapest way to safely remove asphalt. “Dry ice blasting is definitely the best option for cleaning asphalt off of equipment. It’s faster, more efficient and is a safer alternative. It’s also non-abrasive and there’s no water or harsh chemicals mixing in with their asphalt.” - Wes Donaldson of Go Green Dry Ice Blasting Cleaning with Cold Jet Dry Ice Blasting Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #RemoveAsphalt #DryIceBlasting #ColdJetAustralia

Are you struggling to finish on time your cleaning routines and keep your production equipment clean? What if we could help you reduce your downtime by up to 70%? With our Cold Jet Dry Ice Blasting Technology it is possible!!! and you will be amazed to see how your cleaning time will be reduced from hours to just minutes!!! If you need any help or further technical information we are here to support you. Cleaning with Cold Jet Dry Ice Blasting Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #RemoveGrease #DryIceBlasting #ColdJetAustralia

Dry Ice Blasting Cleaning is ideal for removing bitumen, tar and grime build up from Mining Equipment (Such as a Heavy Haulers). Help keep maintenance costs low by cleaning components using Dry Ice Blasting. Dry Ice Blast Cleaning uses portable equipment, able to visit the job site day or night, eliminating any downtime while revealing any potential future maintenance issues. Dry Ice Blast cleaning removes dirt, grime, tar, and bitumen to reveal a clean surface, exposing hidden cracks. Dry Ice Blast Cleaning is safe around wires, without disassembly or downtime. Cold Jet Dry Ice Blasting machines are portable and do not take up a lot of room. Cleaning with Cold Jet Dry Ice Blasting in the Mining industry Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #MiningIndustry #DryIceBlasting #ColdJetAustralia

Dry ice blasting is an effective solution for removing a variety of contaminants including concrete dust. The process can also be automated by integrating a Cold Jet dry ice blaster with a robot. Cleaning with Cold Jet Dry Ice Blasting Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #ConcreteDustRemoval #DryIceBlasting #ColdJetAustralia

Dry ice cleaning is similar to sand, bead and soda blasting in that it prepares and cleans surfaces using a media accelerated in a pressurized air stream. It differs in that dry ice cleaning uses solid CO2 pellets or MicroParticles, which are blasted at supersonic speeds and sublimate on impact, lifting dirt and contaminants off the underlying substrate. We provide environmental cleaning, surface preparation and parts finishing systems to global manufacturing industries. These systems utilize particles of dry ice as a blasting medium. Secondly, we produce systems for the production, metering and packaging of dry ice. These systems enable the consistent production of a controlled range of dry ice products for food transportation, cold chain management and dry ice cleaning. Customers are using our technology-based solutions to replace outdated processes that are inefficient and harmful to health and safety. Cleaning with Cold Jet Dry Ice Blasting Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #HowToUse #ColdJetAustralia #DryIceBlasting