| /* |
| * Common code for DHD command-line utility |
| * |
| * Copyright (C) 1999-2013, Broadcom Corporation |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| * |
| * $Id: dhdu.c 385965 2013-02-19 04:33:34Z $ |
| */ |
| |
| /* For backwards compatibility, the absence of the define 'BWL_NO_FILESYSTEM_SUPPORT' |
| * implies that a filesystem is supported. |
| */ |
| #if !defined(BWL_NO_FILESYSTEM_SUPPORT) |
| #define BWL_FILESYSTEM_SUPPORT |
| #endif |
| |
| #ifndef PROP_TXSTATUS |
| #define PROP_TXSTATUS |
| #endif |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <strings.h> |
| #include <ctype.h> |
| #include <assert.h> |
| |
| #include <typedefs.h> |
| #include <epivers.h> |
| #include <proto/ethernet.h> |
| #include <dhdioctl.h> |
| #include <sdiovar.h> |
| #include <bcmutils.h> |
| #include <bcmendian.h> |
| #include "dhdu.h" |
| #include "miniopt.h" |
| #include <proto/bcmip.h> |
| #include <hndrte_debug.h> |
| #include <hndrte_armtrap.h> |
| #include <hndrte_cons.h> |
| #define IPV4_ADDR_LEN 4 |
| |
| #include <errno.h> |
| |
| #include <trxhdr.h> |
| #include "ucode_download.h" |
| |
| #define stricmp strcasecmp |
| #define strnicmp strncasecmp |
| |
| |
| static cmd_func_t dhd_var_void; |
| static cmd_func_t dhd_varint, dhd_varstr; |
| static cmd_func_t dhd_var_getandprintstr, dhd_var_getint, dhd_var_get; |
| static cmd_func_t dhd_var_setint; |
| |
| static cmd_func_t dhd_version, dhd_list, dhd_msglevel; |
| |
| #ifdef SDTEST |
| static cmd_func_t dhd_pktgen; |
| #endif |
| static cmd_func_t dhd_sprom; |
| static cmd_func_t dhd_sdreg; |
| static cmd_func_t dhd_sd_msglevel, dhd_sd_blocksize, dhd_sd_mode, dhd_sd_reg; |
| static cmd_func_t dhd_dma_mode; |
| static cmd_func_t dhd_membytes, dhd_download, dhd_dldn, |
| dhd_upload, dhd_coredump, dhd_consoledump, dhd_vars, dhd_idleclock, dhd_idletime; |
| static cmd_func_t dhd_logstamp; |
| |
| static cmd_func_t dhd_hostreorder_flows; |
| |
| #ifdef PROP_TXSTATUS |
| static cmd_func_t dhd_proptxstatusenable; |
| static cmd_func_t dhd_proptxstatusmode; |
| static cmd_func_t dhd_proptxopt; |
| #endif |
| static int dhd_var_getbuf(void *dhd, char *iovar, void *param, int param_len, void **bufptr); |
| static int dhd_var_setbuf(void *dhd, char *iovar, void *param, int param_len); |
| |
| static uint dhd_iovar_mkbuf(char *name, char *data, uint datalen, |
| char *buf, uint buflen, int *perr); |
| static int dhd_iovar_getint(void *dhd, char *name, int *var); |
| static int dhd_iovar_setint(void *dhd, char *name, int var); |
| |
| #if defined(BWL_FILESYSTEM_SUPPORT) |
| static int file_size(char *fname); |
| static int read_vars(char *fname, char *buf, int buf_maxlen); |
| #endif |
| |
| |
| /* dword align allocation */ |
| static union { |
| char bufdata[DHD_IOCTL_MAXLEN]; |
| uint32 alignme; |
| } bufstruct_dhd; |
| static char *buf = (char*) &bufstruct_dhd.bufdata; |
| |
| /* integer output format, default to signed integer */ |
| static uint8 int_fmt; |
| |
| #define DEBUG_INFO_PTRS_END 0xffffffff |
| const uint32 debug_info_ptrs[] = {0xf8, 0x878, DEBUG_INFO_PTRS_END}; |
| |
| typedef struct { |
| uint value; |
| char *string; |
| } dbg_msg_t; |
| |
| static int dhd_do_msglevel(void *dhd, cmd_t *cmd, char **argv, dbg_msg_t *dbg_msg); |
| |
| /* Actual command table */ |
| cmd_t dhd_cmds[] = { |
| { "cmds", dhd_list, -1, -1, |
| "generate a short list of available commands"}, |
| { "version", dhd_version, DHD_GET_VAR, -1, |
| "get version information" }, |
| { "msglevel", dhd_msglevel, DHD_GET_VAR, DHD_SET_VAR, |
| "get/set message bits" }, |
| { "bcmerrorstr", dhd_var_getandprintstr, DHD_GET_VAR, -1, |
| "errorstring"}, |
| { "wdtick", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "watchdog tick time (ms units)"}, |
| { "intr", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "use interrupts on the bus"}, |
| { "pollrate", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "number of ticks between bus polls (0 means no polling)"}, |
| { "idletime", dhd_idletime, DHD_GET_VAR, DHD_SET_VAR, |
| "number of ticks for activity timeout (-1: immediate, 0: never)"}, |
| { "idleclock", dhd_idleclock, DHD_GET_VAR, DHD_SET_VAR, |
| "idleclock active | stopped | <N>\n" |
| "\tactive (0) - do not request any change to the SD clock\n" |
| "\tstopped (-1) - request SD clock be stopped on activity timeout\n" |
| "\t<N> (other) - an sd_divisor value to request on activity timeout\n"}, |
| { "sd1idle", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "change mode to SD1 when turning off clock at idle"}, |
| { "forceeven", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "force SD tx/rx buffers to be even"}, |
| { "readahead", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "enable readahead feature (look for next frame len in headers)"}, |
| { "sdrxchain", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "enable packet chains to SDIO stack for glom receive"}, |
| { "alignctl", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "align control frames"}, |
| { "sdalign", dhd_varint, DHD_GET_VAR, -1, |
| "display the (compiled in) alignment target for sd requests"}, |
| { "txbound", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "get/set maximum number of tx frames per scheduling"}, |
| { "rxbound", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "get/set maximum number of rx frames per scheduling"}, |
| { "txminmax", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "get/set maximum number of tx frames per scheduling while rx frames outstanding"}, |
| { "dconpoll", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "g/set dongle console polling interval (ms)"}, |
| { "dump", dhd_varstr, DHD_GET_VAR, -1, |
| "dump information"}, |
| { "cons", dhd_varstr, -1, DHD_SET_VAR, |
| "send string to device console (sd only)"}, |
| { "clearcounts", dhd_var_void, -1, DHD_SET_VAR, |
| "reset the bus stats shown in the dhd dump"}, |
| { "logdump", dhd_varstr, DHD_GET_VAR, -1, |
| "dump the timestamp logging buffer"}, |
| { "logcal", dhd_varint, -1, DHD_SET_VAR, |
| "logcal <n> -- log around an osl_delay of <n> usecs"}, |
| { "logstamp", dhd_logstamp, -1, DHD_SET_VAR, |
| "logstamp [<n1>] [<n2>] -- add a message to the log"}, |
| { "ramstart", dhd_varint, DHD_GET_VAR, -1, |
| "display start address of onchip SOCRAM"}, |
| { "ramsize", dhd_varint, DHD_GET_VAR, -1, |
| "display size of onchip SOCRAM"}, |
| { "membytes", dhd_membytes, DHD_GET_VAR, DHD_SET_VAR, |
| "membytes [-h | -r | -i] <address> <length> [<data>]\n" |
| "\tread or write data in the dongle ram\n" |
| "\t-h <data> is a sequence of hex digits rather than a char string\n" |
| "\t-r output binary to stdout rather hex\n"}, |
| { "download", dhd_download, -1, DHD_SET_VAR, |
| "download [-a <address>] [--noreset] [--norun] [--verify] <binfile> [<varsfile>]\n" |
| "\tdownload file to specified dongle ram address and start CPU\n" |
| "\toptional vars file will replace vars parsed from the CIS\n" |
| "\t--noreset do not reset SOCRAM core before download\n" |
| "\t--norun do not start dongle CPU after download\n" |
| "\t--verify do readback verify \n" |
| "\tdefault <address> is 0\n"}, |
| { "dldn", dhd_dldn, -1, DHD_SET_VAR, |
| "download <binfile>\n" |
| "\tdownload file to specified dongle ram address 0\n"}, |
| { "vars", dhd_vars, DHD_GET_VAR, DHD_SET_VAR, |
| "vars [<file>]\n" |
| "\toverride SPROM vars with <file> (before download)\n"}, |
| { "coredump", dhd_coredump, -1, -1, |
| "coredump <file>\n" |
| "\tdump dongle RAM content into a file in dumpfile format\n" |
| "\tfor use with ELF core generator"}, |
| { "consoledump", dhd_consoledump, -1, -1, |
| "consoledump\n" |
| "\tdump dongle debug console buffer"}, |
| { "upload", dhd_upload, -1, -1, |
| "upload [-a <address> ] <file> [<size>]\n" |
| "\tupload dongle RAM content into a file\n" |
| "\tdefault <address> is 0, default <size> is RAM size"}, |
| { "srdump", dhd_sprom, DHD_GET_VAR, -1, |
| "display SPROM content" }, |
| { "srwrite", dhd_sprom, -1, DHD_SET_VAR, |
| "write data or file content to SPROM\n" |
| "\tsrwrite <word-offset> <word-value> ...\n" |
| "\tsrwrite [-c] <srom-file-path>\n" |
| "\t -c means write regardless of crc"}, |
| { "sleep", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "enter/exit simulated host sleep (bus powerdown w/OOB wakeup)"}, |
| { "kso", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "keep sdio on"}, |
| { "devcap", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "brcm device capabilities"}, |
| { "devsleep", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "Sleep CMD14"}, |
| #ifdef SDTEST |
| { "extloop", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "external loopback: convert all tx data to echo test frames"}, |
| { "pktgen", dhd_pktgen, DHD_GET_VAR, DHD_SET_VAR, |
| "configure/report pktgen status (SDIO)\n" |
| "\t-f N frequency: send/recv a burst every N ticks\n" |
| "\t-c N count: send/recv N packets each burst\n" |
| "\t-t N total: stop after a total of N packets\n" |
| "\t-p N print: display counts on console every N bursts\n" |
| "\t-m N min: set minimum length of packet data\n" |
| "\t-M N Max: set maximum length of packet data\n" |
| "\t-l N len: set fixed length of packet data\n" |
| "\t-s N stop after N tx failures\n" |
| "\t-d dir test direction/type:\n" |
| "\t send -- send packets discarded by dongle\n" |
| "\t echo -- send packets to be echoed by dongle\n" |
| "\t burst -- request bursts (of size <-c>) from dongle\n" |
| "\t one every <-f> ticks, until <-t> total requests\n" |
| "\t recv -- request dongle enter continuous send mode,\n" |
| "\t read up to <-c> pkts every <-f> ticks until <-t>\n" |
| "\t total reads\n"}, |
| #endif /* SDTEST */ |
| { "dngl_isolation", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "g/set dongle isolation, so the dev could be disabled with out effecting the dongle state"}, |
| { "sdreg", dhd_sdreg, DHD_GET_VAR, DHD_SET_VAR, |
| "g/set sdpcmdev core register (f1) across SDIO (CMD53)"}, |
| { "sbreg", dhd_sdreg, DHD_GET_VAR, DHD_SET_VAR, |
| "g/set any backplane core register (f1) across SDIO (CMD53)"}, |
| { "sd_cis", dhd_var_getandprintstr, DHD_GET_VAR, -1, |
| "dump sdio CIS"}, |
| { "sd_devreg", dhd_sd_reg, DHD_GET_VAR, DHD_SET_VAR, |
| "g/set device register across SDIO bus (CMD52)"}, |
| { "sd_hostreg", dhd_sd_reg, DHD_GET_VAR, DHD_SET_VAR, |
| "g/set local controller register"}, |
| { "sd_blocksize", dhd_sd_blocksize, DHD_GET_VAR, DHD_SET_VAR, |
| "g/set block size for a function"}, |
| { "sd_blockmode", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "g/set blockmode"}, |
| { "sd_ints", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "g/set client ints"}, |
| { "sd_dma", dhd_dma_mode, DHD_GET_VAR, DHD_SET_VAR, |
| "g/set dma usage: [PIO | SDMA | ADMA1 | ADMA2]"}, |
| { "sd_yieldcpu", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "allow blocking (yield of CPU) on data xfer"}, |
| { "sd_minyield", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "minimum xfer size to allow CPU yield"}, |
| { "sd_forcerb", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "force readback when changing local interrupt settings"}, |
| { "sd_numints", dhd_varint, DHD_GET_VAR, -1, |
| "number of device interrupts"}, |
| { "sd_numlocalints", dhd_varint, DHD_GET_VAR, -1, |
| "number of non-device interrupts"}, |
| { "sd_divisor", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "set the divisor for SDIO clock generation"}, |
| { "sd_power", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "set the SD Card slot power"}, |
| { "sd_power_save", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "set the SDIO3.0 power save value"}, |
| { "sd_clock", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "turn on/off the SD Clock"}, |
| { "sd_crc", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "turn on/off CRC checking in SPI mode"}, |
| { "sd_mode", dhd_sd_mode, DHD_GET_VAR, DHD_SET_VAR, |
| "g/set SDIO bus mode (spi, sd1, sd4)"}, |
| { "sd_highspeed", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "set the high-speed clocking mode"}, |
| { "sd_msglevel", dhd_sd_msglevel, DHD_GET_VAR, DHD_SET_VAR, |
| "g/set debug message level"}, |
| { "sd_hciregs", dhd_varstr, DHD_GET_VAR, -1, |
| "display host-controller interrupt registers"}, |
| { "sdiod_drive", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "SDIO Device drive strength in milliamps. (0=tri-state, 1-12mA)"}, |
| { "devreset", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "Move device into or out of reset state (1/reset, or 0/operational)"}, |
| { "ioctl_timeout", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "IOCTL response timeout (milliseconds)."}, |
| #ifdef PROP_TXSTATUS |
| { "proptx", dhd_proptxstatusenable, DHD_GET_VAR, DHD_SET_VAR, |
| "enable/disable the proptxtstatus feature\n" |
| "0 - disabled\n" |
| "1 - enabled\n"}, |
| { "ptxmode", dhd_proptxstatusmode, DHD_GET_VAR, DHD_SET_VAR, |
| "set the proptxtstatus operation mode:\n" |
| "0 - Unsupported\n" |
| "1 - Use implied credit from a packet status\n" |
| "2 - Use explicit credit\n" }, |
| { "proptx_opt", dhd_proptxopt, DHD_GET_VAR, DHD_SET_VAR, |
| "enable/disable proptxtstatus optimizations to increase throughput:\n" |
| "0 - Unsupported\n" |
| "1 - Enable proptxstatus optimizations to increase throughput\n" }, |
| #endif |
| { "sd_uhsimode", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "g/set UHSI Mode"}, |
| { "host_reorder_flows", dhd_hostreorder_flows, DHD_GET_VAR, -1, |
| "get host reorder flows "}, |
| { "txglomsize", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "max glom size for sdio tx\n"}, |
| { "txglommode", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "glom mode for sdio tx 0- copy, 1- multidescriptor\n"}, |
| { "fw_hang_report", dhd_varint, DHD_GET_VAR, DHD_SET_VAR, |
| "enable/disable report firmware hangs for firmware reload\n" |
| "0 - disabled (for testing)\n" |
| "1 - enabled (default)\n"}, |
| { NULL, NULL, 0, 0, NULL } |
| }; |
| |
| cmd_t dhd_varcmd = {"var", dhd_varint, -1, -1, "unrecognized name, type -h for help"}; |
| char *dhdu_av0; |
| |
| #if defined(BWL_FILESYSTEM_SUPPORT) |
| static int |
| file_size(char *fname) |
| { |
| FILE *fp; |
| long size = -1; |
| |
| /* Can't use stat() because of Win CE */ |
| |
| if ((fp = fopen(fname, "rb")) == NULL || |
| fseek(fp, 0, SEEK_END) < 0 || |
| (size = ftell(fp)) < 0) |
| fprintf(stderr, "Could not determine size of %s: %s\n", |
| fname, strerror(errno)); |
| |
| if (fp != NULL) |
| fclose(fp); |
| |
| return (int)size; |
| } |
| #endif /* BWL_FILESYSTEM_SUPPORT */ |
| |
| |
| /* parse/validate the command line arguments */ |
| /* |
| * pargv is updated upon return if the first argument is an option. |
| * It remains intact otherwise. |
| */ |
| int |
| dhd_option(char ***pargv, char **pifname, int *phelp) |
| { |
| char *ifname = NULL; |
| int help = FALSE; |
| int status = CMD_OPT; |
| char **argv = *pargv; |
| |
| int_fmt = INT_FMT_DEC; |
| |
| while (*argv) { |
| /* select different adapter */ |
| if (!strcmp(*argv, "-a") || !strcmp(*argv, "-i")) { |
| char *opt = *argv++; |
| ifname = *argv; |
| if (!ifname) { |
| fprintf(stderr, |
| "error: expected interface name after option %s\n", opt); |
| status = CMD_ERR; |
| break; |
| } |
| } |
| |
| /* integer output format */ |
| else if (!strcmp(*argv, "-d")) |
| int_fmt = INT_FMT_DEC; |
| else if (!strcmp(*argv, "-u")) |
| int_fmt = INT_FMT_UINT; |
| else if (!strcmp(*argv, "-x")) |
| int_fmt = INT_FMT_HEX; |
| |
| /* command usage */ |
| else if (!strcmp(*argv, "-h")) |
| help = TRUE; |
| |
| /* done with generic options */ |
| else { |
| status = CMD_DHD; |
| break; |
| } |
| |
| /* consume the argument */ |
| argv ++; |
| break; |
| } |
| |
| *phelp = help; |
| *pifname = ifname; |
| *pargv = argv; |
| |
| return status; |
| } |
| |
| void |
| dhd_cmd_usage(cmd_t *cmd) |
| { |
| if (strlen(cmd->name) >= 8) |
| fprintf(stderr, "%s\n\t%s\n\n", cmd->name, cmd->help); |
| else |
| fprintf(stderr, "%s\t%s\n\n", cmd->name, cmd->help); |
| } |
| |
| /* Dump out short list of commands */ |
| static int |
| dhd_list(void *dhd, cmd_t *garb, char **argv) |
| { |
| cmd_t *cmd; |
| int nrows, i, len; |
| char *buf; |
| int letter, col, row, pad; |
| |
| UNUSED_PARAMETER(dhd); |
| UNUSED_PARAMETER(garb); |
| UNUSED_PARAMETER(argv); |
| |
| for (cmd = dhd_cmds, nrows = 0; cmd->name; cmd++) |
| nrows++; |
| |
| nrows /= 4; |
| nrows++; |
| |
| len = nrows * 80 + 2; |
| buf = malloc(len); |
| if (buf == NULL) { |
| fprintf(stderr, "Failed to allocate buffer of %d bytes\n", len); |
| return BCME_NOMEM; |
| } |
| for (i = 0; i < len; i++) |
| *(buf+i) = 0; |
| |
| row = col = 0; |
| for (letter = 'a'; letter < 'z'; letter++) { |
| for (cmd = dhd_cmds; cmd->name; cmd++) { |
| if (cmd->name[0] == letter || cmd->name[0] == letter - 0x20) { |
| strcat(buf+row*80, cmd->name); |
| pad = 18 * (col + 1) - strlen(buf+row*80); |
| if (pad < 1) |
| pad = 1; |
| for (; pad; pad--) |
| strcat(buf+row*80, " "); |
| row++; |
| if (row == nrows) { |
| col++; row = 0; |
| } |
| } |
| } |
| } |
| for (row = 0; row < nrows; row++) |
| printf("%s\n", buf+row*80); |
| |
| printf("\n"); |
| free(buf); |
| return (0); |
| } |
| |
| void |
| dhd_cmds_usage(cmd_t *port_cmds) |
| { |
| cmd_t *port_cmd; |
| cmd_t *cmd; |
| |
| /* print usage of port commands */ |
| for (port_cmd = port_cmds; port_cmd && port_cmd->name; port_cmd++) |
| /* Check for wc_cmd */ |
| dhd_cmd_usage(port_cmd); |
| |
| /* print usage of common commands without port counterparts */ |
| for (cmd = dhd_cmds; cmd->name; cmd++) { |
| /* search if port counterpart exists */ |
| for (port_cmd = port_cmds; port_cmd && port_cmd->name; port_cmd++) |
| if (!strcmp(port_cmd->name, cmd->name)) |
| break; |
| if (!port_cmd || !port_cmd->name) |
| dhd_cmd_usage(cmd); |
| } |
| } |
| |
| void |
| dhd_usage(cmd_t *port_cmds) |
| { |
| fprintf(stderr, |
| "Usage: %s [-a|i <adapter>] [-h] [-d|u|x] <command> [arguments]\n", |
| dhdu_av0); |
| |
| fprintf(stderr, "\n"); |
| fprintf(stderr, " -h this message\n"); |
| fprintf(stderr, " -a, -i adapter name or number\n"); |
| fprintf(stderr, " -d display values as signed integer\n"); |
| fprintf(stderr, " -u display values as unsigned integer\n"); |
| fprintf(stderr, " -x display values as hexdecimal\n"); |
| fprintf(stderr, "\n"); |
| |
| dhd_cmds_usage(port_cmds); |
| } |
| |
| int |
| dhd_check(void *dhd) |
| { |
| int ret; |
| int val; |
| |
| if ((ret = dhd_get(dhd, DHD_GET_MAGIC, &val, sizeof(int))) < 0) |
| return ret; |
| if (val != DHD_IOCTL_MAGIC) |
| return -1; |
| if ((ret = dhd_get(dhd, DHD_GET_VERSION, &val, sizeof(int))) < 0) |
| return ret; |
| if (val > DHD_IOCTL_VERSION) { |
| fprintf(stderr, "Version mismatch, please upgrade\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| void |
| dhd_printint(int val) |
| { |
| switch (int_fmt) { |
| case INT_FMT_UINT: |
| printf("%u\n", val); |
| break; |
| case INT_FMT_HEX: |
| printf("0x%x\n", val); |
| break; |
| case INT_FMT_DEC: |
| default: |
| printf("%d\n", val); |
| break; |
| } |
| } |
| |
| /* pretty hex print a contiguous buffer (tweaked from wlu) */ |
| void |
| dhd_hexdump(uchar *buf, uint nbytes, uint saddr) |
| { |
| char line[256]; |
| char* p; |
| uint i; |
| |
| if (nbytes == 0) { |
| printf("\n"); |
| return; |
| } |
| |
| p = line; |
| for (i = 0; i < nbytes; i++) { |
| if (i % 16 == 0) { |
| p += sprintf(p, "%08x: ", saddr + i); /* line prefix */ |
| } |
| p += sprintf(p, "%02x ", buf[i]); |
| if (i % 16 == 15) { |
| uint j; |
| p += sprintf(p, " "); |
| for (j = i-15; j <= i; j++) |
| p += sprintf(p, "%c", |
| ((buf[j] >= 0x20 && buf[j] <= 0x7f) ? buf[j] : '.')); |
| printf("%s\n", line); /* flush line */ |
| p = line; |
| } |
| } |
| |
| /* flush last partial line */ |
| if (p != line) |
| printf("%s\n", line); |
| } |
| |
| |
| #ifdef SDTEST |
| static int |
| dhd_pktgen(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int ret = 0; |
| void *ptr = NULL; |
| dhd_pktgen_t pktgen; |
| char *str; |
| |
| UNUSED_PARAMETER(dhd); |
| UNUSED_PARAMETER(cmd); |
| |
| /* Get current settings */ |
| if ((ret = dhd_var_getbuf(dhd, "pktgen", NULL, 0, &ptr)) != 0) |
| return ret; |
| memcpy(&pktgen, ptr, sizeof(pktgen)); |
| |
| if (pktgen.version != DHD_PKTGEN_VERSION) { |
| fprintf(stderr, "pktgen version mismatch (module %d app %d)\n", |
| pktgen.version, DHD_PKTGEN_VERSION); |
| return BCME_ERROR; |
| } |
| |
| /* Presence of args implies a set, else a get */ |
| if (*++argv) { |
| miniopt_t opts; |
| int opt_err; |
| |
| /* Initialize option parser */ |
| miniopt_init(&opts, "pktgen", "", FALSE); |
| |
| while ((opt_err = miniopt(&opts, argv)) != -1) { |
| if (opt_err == 1) { |
| fprintf(stderr, "pktgen options error\n"); |
| ret = -1; |
| goto exit; |
| } |
| argv += opts.consumed; |
| |
| if (!opts.good_int && opts.opt != 'd') { |
| fprintf(stderr, "invalid integer %s\n", opts.valstr); |
| ret = -1; |
| goto exit; |
| } |
| |
| switch (opts.opt) { |
| case 'f': |
| pktgen.freq = opts.uval; |
| break; |
| case 'c': |
| pktgen.count = opts.uval; |
| break; |
| case 'p': |
| pktgen.print = opts.uval; |
| break; |
| case 't': |
| pktgen.total = opts.uval; |
| break; |
| case 's': |
| pktgen.stop = opts.uval; |
| break; |
| case 'm': |
| pktgen.minlen = opts.uval; |
| break; |
| case 'M': |
| pktgen.maxlen = opts.uval; |
| break; |
| case 'l': case 'L': |
| pktgen.minlen = pktgen.maxlen = opts.uval; |
| break; |
| case 'd': |
| if (!strcmp(opts.valstr, "send")) |
| pktgen.mode = DHD_PKTGEN_SEND; |
| else if (!strcmp(opts.valstr, "echo")) |
| pktgen.mode = DHD_PKTGEN_ECHO; |
| else if (!strcmp(opts.valstr, "burst")) |
| pktgen.mode = DHD_PKTGEN_RXBURST; |
| else if (!strcmp(opts.valstr, "recv")) |
| pktgen.mode = DHD_PKTGEN_RECV; |
| else { |
| fprintf(stderr, "unrecognized dir mode %s\n", |
| opts.valstr); |
| return BCME_USAGE_ERROR; |
| } |
| break; |
| |
| default: |
| fprintf(stderr, "option parsing error (key %s valstr %s)\n", |
| opts.key, opts.valstr); |
| ret = BCME_USAGE_ERROR; |
| goto exit; |
| } |
| } |
| |
| if (pktgen.maxlen < pktgen.minlen) { |
| fprintf(stderr, "min/max error (%d/%d)\n", pktgen.minlen, pktgen.maxlen); |
| ret = -1; |
| goto exit; |
| } |
| |
| /* Set the new values */ |
| ret = dhd_var_setbuf(dhd, "pktgen", &pktgen, sizeof(pktgen)); |
| } else { |
| printf("Counts: %d send attempts, %d received, %d tx failures\n", |
| pktgen.numsent, pktgen.numrcvd, pktgen.numfail); |
| } |
| |
| /* Show configuration in either case */ |
| switch (pktgen.mode) { |
| case DHD_PKTGEN_ECHO: str = "echo"; break; |
| case DHD_PKTGEN_SEND: str = "send"; break; |
| case DHD_PKTGEN_RECV: str = "recv"; break; |
| case DHD_PKTGEN_RXBURST: str = "burst"; break; |
| default: str = "UNKNOWN"; break; |
| } |
| |
| printf("Config: mode %s %d pkts (len %d-%d) each %d ticks\n", |
| str, pktgen.count, pktgen.minlen, pktgen.maxlen, pktgen.freq); |
| |
| /* Second config line for optional items */ |
| str = " "; |
| if (pktgen.total) { |
| printf("%slimit %d", str, pktgen.total); |
| str = ", "; |
| } |
| if (pktgen.print) { |
| printf("%sprint every %d ticks", str, (pktgen.freq * pktgen.print)); |
| str = ", "; |
| } |
| if (pktgen.stop) { |
| printf("%sstop after %d tx failures", str, pktgen.stop); |
| str = ", "; |
| } |
| if (str[0] == ',') |
| printf("\n"); |
| |
| exit: |
| return ret; |
| } |
| #endif /* SDTEST */ |
| |
| static dbg_msg_t dhd_sd_msgs[] = { |
| {SDH_ERROR_VAL, "error"}, |
| {SDH_TRACE_VAL, "trace"}, |
| {SDH_INFO_VAL, "info"}, |
| {SDH_DATA_VAL, "data"}, |
| {SDH_CTRL_VAL, "control"}, |
| {SDH_LOG_VAL, "log"}, |
| {SDH_DMA_VAL, "dma"}, |
| {0, NULL} |
| }; |
| |
| static int |
| dhd_sd_msglevel(void *dhd, cmd_t *cmd, char **argv) |
| { |
| return dhd_do_msglevel(dhd, cmd, argv, dhd_sd_msgs); |
| } |
| |
| static int |
| dhd_sd_blocksize(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int ret; |
| int argc; |
| char *endptr = NULL; |
| void *ptr = NULL; |
| int func, size; |
| |
| /* arg count */ |
| for (argc = 0; argv[argc]; argc++); |
| argc--; |
| |
| if (argc < 1 || argc > 2) { |
| printf("required args: function [size] (size 0 means max)\n"); |
| return BCME_USAGE_ERROR; |
| } |
| |
| func = strtol(argv[1], &endptr, 0); |
| if (*endptr != '\0') { |
| printf("Invalid function: %s\n", argv[1]); |
| return BCME_USAGE_ERROR; |
| } |
| |
| if (argc > 1) { |
| size = strtol(argv[2], &endptr, 0); |
| if (*endptr != '\0') { |
| printf("Invalid size: %s\n", argv[1]); |
| return BCME_USAGE_ERROR; |
| } |
| } |
| |
| if (argc == 1) { |
| if ((ret = dhd_var_getbuf(dhd, cmd->name, &func, sizeof(func), &ptr)) >= 0) |
| printf("Function %d block size: %d\n", func, *(int*)ptr); |
| } else { |
| printf("Setting function %d block size to %d\n", func, size); |
| size &= 0x0000ffff; size |= (func << 16); |
| ret = dhd_var_setbuf(dhd, cmd->name, &size, sizeof(size)); |
| } |
| |
| return (ret); |
| } |
| |
| static int |
| dhd_sd_mode(void *wl, cmd_t *cmd, char **argv) |
| { |
| int ret; |
| int argc; |
| int sdmode; |
| |
| /* arg count */ |
| for (argc = 0; argv[argc]; argc++); |
| argc--; |
| |
| if (argv[1]) { |
| if (!strcmp(argv[1], "spi")) { |
| strcpy(argv[1], "0"); |
| } else if (!strcmp(argv[1], "sd1")) { |
| strcpy(argv[1], "1"); |
| } else if (!strcmp(argv[1], "sd4")) { |
| strcpy(argv[1], "2"); |
| } else { |
| return BCME_USAGE_ERROR; |
| } |
| |
| ret = dhd_var_setint(wl, cmd, argv); |
| |
| } else { |
| if ((ret = dhd_var_get(wl, cmd, argv))) { |
| return (ret); |
| } else { |
| sdmode = *(int32*)buf; |
| |
| printf("SD Mode is: %s\n", |
| sdmode == 0 ? "SPI" |
| : sdmode == 1 ? "SD1" |
| : sdmode == 2 ? "SD4" : "Unknown"); |
| } |
| } |
| |
| return (ret); |
| } |
| |
| static int |
| dhd_dma_mode(void *wl, cmd_t *cmd, char **argv) |
| { |
| int ret; |
| int argc; |
| int dmamode; |
| |
| /* arg count */ |
| for (argc = 0; argv[argc]; argc++); |
| argc--; |
| |
| if (argv[1]) { |
| if (!stricmp(argv[1], "pio")) { |
| strcpy(argv[1], "0"); |
| } else if (!strcmp(argv[1], "0")) { |
| } else if (!stricmp(argv[1], "dma")) { |
| strcpy(argv[1], "1"); |
| } else if (!stricmp(argv[1], "sdma")) { |
| strcpy(argv[1], "1"); |
| } else if (!strcmp(argv[1], "1")) { |
| } else if (!stricmp(argv[1], "adma1")) { |
| strcpy(argv[1], "2"); |
| } else if (!stricmp(argv[1], "adma")) { |
| strcpy(argv[1], "3"); |
| } else if (!stricmp(argv[1], "adma2")) { |
| strcpy(argv[1], "3"); |
| } else { |
| return BCME_USAGE_ERROR; |
| } |
| |
| ret = dhd_var_setint(wl, cmd, argv); |
| |
| } else { |
| if ((ret = dhd_var_get(wl, cmd, argv))) { |
| return (ret); |
| } else { |
| dmamode = *(int32*)buf; |
| |
| printf("DMA Mode is: %s\n", |
| dmamode == 0 ? "PIO" |
| : dmamode == 1 ? "SDMA" |
| : dmamode == 2 ? "ADMA1" |
| : dmamode == 3 ? "ADMA2" |
| : "Unknown"); |
| } |
| } |
| |
| return (ret); |
| } |
| |
| |
| static int |
| dhd_sdreg(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int ret; |
| sdreg_t sdreg; |
| uint argc; |
| char *ptr = NULL; |
| |
| UNUSED_PARAMETER(cmd); |
| |
| bzero(&sdreg, sizeof(sdreg)); |
| |
| /* arg count */ |
| for (argc = 0; argv[argc]; argc++); |
| argc--; |
| |
| /* required args: offset (will default size) */ |
| if (argc < 1) { |
| printf("required args: offset[/size] [value]\n"); |
| return BCME_USAGE_ERROR; |
| } |
| |
| sdreg.offset = strtoul(argv[1], &ptr, 0); |
| if (*ptr && *ptr != '/') { |
| printf("Bad arg: %s\n", argv[1]); |
| return BCME_USAGE_ERROR; |
| } |
| |
| /* read optional /size */ |
| if (*ptr == '/') { |
| sdreg.func = strtol((ptr+1), &ptr, 0); |
| if (*ptr || ((sdreg.func != 2) && sdreg.func != 4)) { |
| printf("Bad size option?\n"); |
| return BCME_USAGE_ERROR; |
| } |
| } |
| else { |
| sdreg.func = 4; |
| printf("Defaulting to register size 4\n"); |
| } |
| |
| if (argc > 1) { |
| sdreg.value = strtoul(argv[2], &ptr, 0); |
| if (*ptr) { |
| printf("Bad value: %s\n", argv[2]); |
| return BCME_USAGE_ERROR; |
| } |
| } |
| |
| if (argc <= 1) { |
| ret = dhd_var_getbuf(dhd, argv[0], &sdreg, sizeof(sdreg), (void**)&ptr); |
| if (ret >= 0) |
| printf("0x%0*x\n", (2 * sdreg.func), *(int *)ptr); |
| } else { |
| ret = dhd_var_setbuf(dhd, argv[0], &sdreg, sizeof(sdreg)); |
| } |
| |
| return (ret); |
| } |
| |
| static int |
| dhd_membytes(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int ret = -1; |
| uint argc; |
| char *ptr; |
| int params[2]; |
| uint addr; |
| uint len; |
| int align; |
| |
| int rawout, hexin; |
| |
| miniopt_t opts; |
| int opt_err; |
| |
| /* Parse command-line options */ |
| miniopt_init(&opts, "membytes", "rh", FALSE); |
| |
| rawout = hexin = 0; |
| |
| argv++; |
| while ((opt_err = miniopt(&opts, argv)) != -1) { |
| if (opt_err == 1) { |
| fprintf(stderr, "membytes options error\n"); |
| ret = -1; |
| goto exit; |
| } |
| |
| if (opts.positional) |
| break; |
| |
| argv += opts.consumed; |
| |
| if (opts.opt == 'h') { |
| hexin = 1; |
| } else if (opts.opt == 'r') { |
| rawout = 1; |
| } else { |
| fprintf(stderr, "membytes command error\n"); |
| ret = -1; |
| goto exit; |
| } |
| } |
| |
| /* arg count */ |
| for (argc = 0; argv[argc]; argc++); |
| |
| /* required args: address size [<data>]] */ |
| if (argc < 2) { |
| fprintf(stderr, "required args: address size [<data>]\n"); |
| return BCME_USAGE_ERROR; |
| } |
| |
| if (argc < 3 && hexin) { |
| fprintf(stderr, "missing <data> required by -h\n"); |
| return BCME_USAGE_ERROR; |
| } |
| if ((argc > 2) && (rawout)) { |
| fprintf(stderr, "can't have <data> arg with -r\n"); |
| return BCME_USAGE_ERROR; |
| } |
| |
| /* read address */ |
| addr = strtoul(argv[0], &ptr, 0); |
| if (*ptr) { |
| fprintf(stderr, "Bad arg: %s\n", argv[0]); |
| return BCME_USAGE_ERROR; |
| } |
| |
| /* read size */ |
| len = strtoul(argv[1], &ptr, 0); |
| if (*ptr) { |
| fprintf(stderr, "Bad value: %s\n", argv[1]); |
| return BCME_USAGE_ERROR; |
| } |
| |
| align = addr & 0x03; |
| if (align && argc > 2) { |
| fprintf(stderr, "Can only write starting at long-aligned addresses.\n"); |
| return BCME_USAGE_ERROR; |
| } |
| |
| /* get can just use utility function, set must copy custom buffer */ |
| if (argc == 2) { |
| /* Read */ |
| uint chunk = DHD_IOCTL_MAXLEN; |
| for (addr -= align, len += align; len; addr += chunk, len -= chunk, align = 0) { |
| chunk = MIN(chunk, len); |
| params[0] = addr; |
| params[1] = ROUNDUP(chunk, 4); |
| ret = dhd_var_getbuf(dhd, "membytes", |
| params, (2 * sizeof(int)), (void**)&ptr); |
| if (ret < 0) |
| goto exit; |
| |
| if (rawout) { |
| fwrite(ptr + align, sizeof(char), chunk - align, stdout); |
| } else { |
| dhd_hexdump((uchar*)ptr + align, chunk - align, addr + align); |
| } |
| } |
| } else { |
| /* Write */ |
| uint patlen = strlen(argv[2]); |
| uint chunk, maxchunk; |
| char *sptr; |
| |
| if (hexin) { |
| char *inptr, *outptr; |
| if (patlen & 1) { |
| fprintf(stderr, "Hex (-h) must consist of whole bytes\n"); |
| ret = BCME_USAGE_ERROR; |
| goto exit; |
| } |
| |
| for (inptr = outptr = argv[2]; patlen; patlen -= 2) { |
| int n1, n2; |
| |
| n1 = (int)((unsigned char)*inptr++); |
| n2 = (int)((unsigned char)*inptr++); |
| if (!isxdigit(n1) || !isxdigit(n2)) { |
| fprintf(stderr, "invalid hex digit %c\n", |
| (isxdigit(n1) ? n2 : n1)); |
| ret = BCME_USAGE_ERROR; |
| goto exit; |
| } |
| n1 = isdigit(n1) ? (n1 - '0') |
| : ((islower(n1) ? (toupper(n1)) : n1) - 'A' + 10); |
| n2 = isdigit(n2) ? (n2 - '0') |
| : ((islower(n2) ? (toupper(n2)) : n2) - 'A' + 10); |
| *outptr++ = (n1 * 16) + n2; |
| } |
| |
| patlen = outptr - argv[2]; |
| } |
| |
| sptr = argv[2]; |
| maxchunk = DHD_IOCTL_MAXLEN - (strlen(cmd->name) + 1 + (2 * sizeof(int))); |
| |
| while (len) { |
| chunk = (len > maxchunk) ? (maxchunk & ~0x3) : len; |
| |
| /* build the iovar command */ |
| memset(buf, 0, DHD_IOCTL_MAXLEN); |
| strcpy(buf, cmd->name); |
| ptr = buf + strlen(buf) + 1; |
| params[0] = addr; params[1] = chunk; |
| memcpy(ptr, params, (2 * sizeof(int))); |
| ptr += (2 * sizeof(int)); |
| addr += chunk; len -= chunk; |
| |
| while (chunk--) { |
| *ptr++ = *sptr++; |
| if (sptr >= (argv[2] + patlen)) |
| sptr = argv[2]; |
| } |
| |
| ret = dhd_set(dhd, DHD_SET_VAR, &buf[0], (ptr - buf)); |
| if (ret < 0) |
| goto exit; |
| } |
| } |
| |
| exit: |
| return ret; |
| } |
| |
| static int |
| dhd_idletime(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int32 idletime; |
| char *endptr = NULL; |
| int err = 0; |
| |
| if (argv[1]) { |
| if (!strcmp(argv[1], "never")) { |
| idletime = 0; |
| } else if (!strcmp(argv[1], "immediate") || !strcmp(argv[1], "immed")) { |
| idletime = DHD_IDLE_IMMEDIATE; |
| } else { |
| idletime = strtol(argv[1], &endptr, 0); |
| if (*endptr != '\0') { |
| fprintf(stderr, "invalid number %s\n", argv[1]); |
| err = BCME_USAGE_ERROR; |
| } |
| } |
| if ((idletime < 0) && (idletime != DHD_IDLE_IMMEDIATE)) { |
| fprintf(stderr, "invalid value %s\n", argv[1]); |
| err = -1; |
| } |
| |
| if (!err) { |
| strcpy(buf, "idletime"); |
| endptr = buf + strlen(buf) + 1; |
| memcpy(endptr, &idletime, sizeof(uint32)); |
| endptr += sizeof(uint32); |
| err = dhd_set(dhd, DHD_SET_VAR, &buf[0], (endptr - buf)); |
| } |
| } else { |
| if ((err = dhd_var_get(dhd, cmd, argv))) { |
| return err; |
| } else { |
| idletime = *(int32*)buf; |
| |
| if (idletime == 0) { |
| printf("0 (never)\n"); |
| } else if (idletime == DHD_IDLE_IMMEDIATE) { |
| printf("-1 (immediate)\n"); |
| } else if (idletime > 0) { |
| printf("%d\n", idletime); |
| } else printf("%d (invalid)\n", idletime); |
| } |
| } |
| return err; |
| } |
| |
| static int |
| dhd_idleclock(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int32 idleclock; |
| char *endptr = NULL; |
| int err = 0; |
| |
| if (argv[1]) { |
| if (!strcmp(argv[1], "active")) { |
| idleclock = DHD_IDLE_ACTIVE; |
| } else if (!strcmp(argv[1], "stopped")) { |
| idleclock = DHD_IDLE_STOP; |
| } else { |
| idleclock = strtol(argv[1], &endptr, 0); |
| if (*endptr != '\0') { |
| fprintf(stderr, "invalid number %s\n", argv[1]); |
| err = BCME_USAGE_ERROR; |
| } |
| } |
| |
| if (!err) { |
| strcpy(buf, "idleclock"); |
| endptr = buf + strlen(buf) + 1; |
| memcpy(endptr, &idleclock, sizeof(int32)); |
| endptr += sizeof(int32); |
| err = dhd_set(dhd, DHD_SET_VAR, &buf[0], (endptr - buf)); |
| } |
| } else { |
| if ((err = dhd_var_get(dhd, cmd, argv))) { |
| return err; |
| } else { |
| idleclock = *(int32*)buf; |
| |
| if (idleclock == DHD_IDLE_ACTIVE) |
| printf("Idleclock %d (active)\n", idleclock); |
| else if (idleclock == DHD_IDLE_STOP) |
| printf("Idleclock %d (stopped)\n", idleclock); |
| else |
| printf("Idleclock divisor %d\n", idleclock); |
| } |
| } |
| return err; |
| } |
| |
| /* Word count for a 4kb SPROM */ |
| #define SPROM_WORDS 256 |
| |
| static int |
| dhd_sprom(void *dhd, cmd_t *cmd, char **argv) |
| { |
| #if !defined(BWL_FILESYSTEM_SUPPORT) |
| return (-1); |
| #else |
| int ret, i; |
| uint argc; |
| char *endptr; |
| char *bufp, *countptr; |
| uint16 *wordptr; |
| uint offset, words, bytes; |
| bool nocrc = FALSE; |
| |
| char *fname; |
| FILE *fp; |
| |
| UNUSED_PARAMETER(cmd); |
| |
| /* arg count */ |
| for (argc = 0; argv[argc]; argc++); |
| argc--; |
| |
| /* init buffer */ |
| bufp = buf; |
| memset(bufp, 0, DHD_IOCTL_MAXLEN); |
| strcpy(bufp, "sprom"); |
| bufp += strlen("sprom") + 1; |
| |
| if (strcmp(argv[0], "srdump") == 0) { |
| if (argc) { |
| fprintf(stderr, "Command srdump doesn't take args\n"); |
| return BCME_USAGE_ERROR; |
| } |
| offset = 0; |
| words = SPROM_WORDS; |
| bytes = 2 * words; |
| |
| memcpy(bufp, &offset, sizeof(int)); |
| bufp += sizeof(int); |
| memcpy(bufp, &bytes, sizeof(int)); |
| bufp += sizeof(int); |
| |
| if (!ISALIGNED((uintptr)bufp, sizeof(uint16))) { |
| fprintf(stderr, "Internal error: unaligned word buffer\n"); |
| return BCME_ERROR; |
| } |
| } else { |
| if (strcmp(argv[0], "srwrite") != 0) { |
| fprintf(stderr, "Unimplemented sprom command: %s\n", argv[0]); |
| return BCME_USAGE_ERROR; |
| } |
| |
| if (argc == 0) { |
| return BCME_USAGE_ERROR; |
| } else if ((argc == 1) || |
| ((argc == 2) && ((nocrc = !strcmp(argv[1], "-c"))))) { |
| |
| fname = nocrc ? argv[2] : argv[1]; |
| |
| /* determine and validate file size */ |
| if ((ret = file_size(fname)) < 0) |
| return BCME_ERROR; |
| |
| bytes = ret; |
| offset = 0; |
| words = bytes / 2; |
| |
| if (bytes != 2 * SPROM_WORDS) { |
| fprintf(stderr, "Bad file size\n"); |
| return BCME_ERROR; |
| } |
| |
| memcpy(bufp, &offset, sizeof(int)); |
| bufp += sizeof(int); |
| memcpy(bufp, &bytes, sizeof(int)); |
| bufp += sizeof(int); |
| |
| if (!ISALIGNED((uintptr)bufp, sizeof(uint16))) { |
| fprintf(stderr, "Internal error: unaligned word buffer\n"); |
| return BCME_ERROR; |
| } |
| |
| if ((fp = fopen(fname, "rb")) == NULL) { |
| fprintf(stderr, "Could not open %s: %s\n", |
| fname, strerror(errno)); |
| return BCME_ERROR; |
| } |
| |
| if (fread((uint16*)bufp, sizeof(uint16), words, fp) != words) { |
| fprintf(stderr, "Could not read %d bytes from %s\n", |
| words * 2, fname); |
| fclose(fp); |
| return BCME_ERROR; |
| } |
| |
| fclose(fp); |
| |
| if (!nocrc && |
| hndcrc8((uint8*)bufp, bytes, CRC8_INIT_VALUE) != CRC8_GOOD_VALUE) { |
| fprintf(stderr, "CRC check failed: 0x%02x, should be 0x%02x.\n", |
| ((uint8*)bufp)[bytes-1], |
| ~hndcrc8((uint8*)bufp, bytes - 1, CRC8_INIT_VALUE) & 0xff); |
| return BCME_ERROR; |
| } |
| |
| ltoh16_buf(bufp, bytes); |
| } else { |
| offset = strtoul(*++argv, &endptr, 0) * 2; |
| if (*endptr != '\0') { |
| fprintf(stderr, "offset %s is not an integer\n", *argv); |
| return BCME_USAGE_ERROR; |
| } |
| |
| memcpy(bufp, &offset, sizeof(int)); |
| bufp += sizeof(int); |
| countptr = bufp; |
| bufp += sizeof(int); |
| |
| if (!ISALIGNED((uintptr)bufp, sizeof(uint16))) { |
| fprintf(stderr, "Internal error: unaligned word buffer\n"); |
| return BCME_ERROR; |
| } |
| |
| for (words = 0, wordptr = (uint16*)bufp; *++argv; words++) { |
| *wordptr++ = (uint16)strtoul(*argv, &endptr, 0); |
| if (*endptr != '\0') { |
| fprintf(stderr, "value %s is not an integer\n", *argv); |
| return BCME_USAGE_ERROR; |
| } |
| if (words > SPROM_WORDS) { |
| fprintf(stderr, "max of %d words\n", SPROM_WORDS); |
| return BCME_USAGE_ERROR; |
| } |
| } |
| |
| bytes = 2 * words; |
| memcpy(countptr, &bytes, sizeof(int)); |
| } |
| } |
| |
| if (argc) { |
| ret = dhd_set(dhd, DHD_SET_VAR, buf, |
| (strlen("sprom") + 1) + (2 * sizeof(int)) + bytes); |
| return (ret); |
| } else { |
| ret = dhd_get(dhd, DHD_GET_VAR, buf, |
| (strlen("sprom") + 1) + (2 * sizeof(int)) + bytes); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| for (i = 0; i < (int)words; i++) { |
| if ((i % 8) == 0) |
| printf("\n srom[%03d]: ", i); |
| printf("0x%04x ", ((uint16*)buf)[i]); |
| } |
| printf("\n"); |
| } |
| |
| return 0; |
| #endif /* BWL_FILESYSTEM_SUPPORT */ |
| } |
| |
| /* |
| * read_vars: reads an environment variables file into a buffer, |
| * reformatting them and returning the length (-1 on error). |
| * |
| * The input text file consists of lines of the form "<var>=<value>\n". |
| * CRs are ignored, as are blank lines and comments beginning with '#'. |
| * |
| * The output buffer consists of blocks of the form "<var>=<value>\0" |
| * (the newlines have been replaced by NULs) |
| * |
| * Todo: allow quoted variable names and quoted values. |
| */ |
| |
| #if defined(BWL_FILESYSTEM_SUPPORT) |
| static int |
| read_vars(char *fname, char *buf, int buf_maxlen) |
| { |
| FILE *fp; |
| int buf_len, slen; |
| char line[256], *s, *e; |
| int line_no = 0; |
| |
| if ((fp = fopen(fname, "rb")) == NULL) { |
| fprintf(stderr, "Cannot open NVRAM file %s: %s\n", |
| fname, strerror(errno)); |
| exit(1); |
| } |
| |
| buf_len = 0; |
| |
| while (fgets(line, sizeof(line), fp) != NULL) { |
| bool found_eq = FALSE; |
| |
| /* Ensure line length is limited */ |
| line[sizeof(line) - 1] = 0; |
| |
| /* Skip any initial white space */ |
| for (s = line; *s == ' ' || *s == '\t'; s++) |
| ; |
| |
| /* Determine end of string */ |
| for (e = s; *e != 0 && *e != '#' && *e != '\r' && *e != '\n'; e++) |
| if (*e == '=') |
| found_eq = TRUE; |
| |
| /* Strip any white space from end of string */ |
| while (e > s && (e[-1] == ' ' || e[-1] == '\t')) |
| e--; |
| |
| slen = e - s; |
| |
| /* Skip lines that end up blank */ |
| if (slen == 0) |
| continue; |
| |
| if (!found_eq) { |
| fprintf(stderr, "Invalid line %d in NVRAM file %s\n", line_no, fname); |
| fclose(fp); |
| return -1; |
| } |
| |
| if (buf_len + slen + 1 > buf_maxlen) { |
| fprintf(stderr, "NVRAM file %s too long\n", fname); |
| fclose(fp); |
| return -1; |
| } |
| |
| memcpy(buf + buf_len, s, slen); |
| buf_len += slen; |
| buf[buf_len++] = 0; |
| } |
| |
| fclose(fp); |
| |
| return buf_len; |
| } |
| #endif /* BWL_FILESYSTEM_SUPPORT */ |
| |
| static int |
| dhd_vars(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int ret; |
| uint argc; |
| char *bufp; |
| |
| UNUSED_PARAMETER(cmd); |
| |
| /* arg count */ |
| for (argc = 0; argv[argc]; argc++); |
| argc--; |
| |
| switch (argc) { |
| case 0: /* get */ |
| { |
| if ((ret = dhd_var_getbuf(dhd, "vars", NULL, 0, (void**)&bufp))) |
| break; |
| while (*bufp) { |
| printf("%s\n", bufp); |
| bufp += strlen(bufp) + 1; |
| } |
| } |
| break; |
| |
| #if defined(BWL_FILESYSTEM_SUPPORT) |
| case 1: /* set */ |
| { |
| char *vname; |
| uint nvram_len; |
| |
| vname = argv[1]; |
| |
| bufp = buf; |
| strcpy(bufp, "vars"); |
| bufp += strlen("vars") + 1; |
| |
| if ((ret = read_vars(vname, bufp, |
| DHD_IOCTL_MAXLEN - (strlen("vars") + 3))) < 0) { |
| ret = -1; |
| break; |
| } |
| |
| nvram_len = ret; |
| bufp += nvram_len; |
| *bufp++ = 0; |
| |
| ret = dhd_set(dhd, DHD_SET_VAR, buf, bufp - buf); |
| } |
| break; |
| #endif /* BWL_FILESYSTEM_SUPPORT */ |
| |
| default: |
| ret = -1; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| #define MEMBLOCK 2048 |
| |
| /* Check that strlen("membytes")+1 + 2*sizeof(int32) + MEMBLOCK <= DHD_IOCTL_MAXLEN */ |
| #if (MEMBLOCK + 17 > DHD_IOCTL_MAXLEN) |
| #error MEMBLOCK/DHD_IOCTL_MAXLEN sizing |
| #endif |
| |
| |
| #if defined(BWL_FILESYSTEM_SUPPORT) |
| static int |
| dhd_verify_file_bytes(void *dhd, uint8 *memblock, int start, uint len) |
| { |
| int ret = 0; |
| uint i = 0; |
| char *ptr; |
| int params[2]; |
| uint8 *src, *dst; |
| |
| params[0] = start; |
| params[1] = len; |
| ret = dhd_var_getbuf(dhd, "membytes", params, 2 * sizeof(int), (void**)&ptr); |
| if (ret) { |
| fprintf(stderr, "%s: failed reading %d membytes from 0x%08x\n", |
| __FUNCTION__, len, start); |
| return ret; |
| } |
| |
| src = (uint8 *)memblock; |
| dst = (uint8 *)ptr; |
| while (i < len) { |
| if (src[i] != dst[i]) { |
| fprintf(stderr, " 0x%x: exp[0x%02X] != got[0x%02X]\n", |
| start+i, src[i], dst[i]); |
| ret = -1; |
| } |
| i++; |
| } |
| |
| return ret; |
| } |
| |
| static int |
| dhd_load_file_bytes(void *dhd, cmd_t *cmd, FILE *fp, int fsize, int start, uint blk_sz, bool verify) |
| { |
| int tot_len = 0; |
| uint read_len; |
| char *bufp; |
| uint len; |
| uint8 memblock[MEMBLOCK]; |
| int ret; |
| int retry; |
| |
| UNUSED_PARAMETER(cmd); |
| |
| if (!fsize || !fp) |
| return -1; |
| |
| assert(blk_sz <= MEMBLOCK); |
| |
| while (tot_len < fsize) { |
| read_len = fsize - tot_len; |
| if (read_len >= blk_sz) { |
| read_len = blk_sz; |
| |
| if (!ISALIGNED(start, MEMBLOCK)) |
| read_len = ROUNDUP(start, MEMBLOCK) - start; |
| } |
| |
| len = fread(memblock, sizeof(uint8), read_len, fp); |
| if ((len < read_len) && !feof(fp)) { |
| fprintf(stderr, "%s: error reading file\n", __FUNCTION__); |
| return -1; |
| |
| } |
| retry = 0; |
| failed_retry: |
| |
| bufp = buf; |
| memset(bufp, 0, DHD_IOCTL_MAXLEN); |
| strcpy(bufp, "membytes"); |
| bufp += strlen("membytes") + 1; |
| memcpy(bufp, &start, sizeof(int)); |
| bufp += sizeof(int); |
| memcpy(bufp, &len, sizeof(int)); |
| bufp += sizeof(int); |
| memcpy(bufp, memblock, len); |
| |
| ret = dhd_set(dhd, DHD_SET_VAR, &buf[0], (bufp - buf + len)); |
| |
| if (ret) { |
| fprintf(stderr, "%s: error %d on writing %d membytes at 0x%08x\n", |
| __FUNCTION__, ret, len, start); |
| return ret; |
| } |
| |
| if (verify == TRUE) { |
| if (dhd_verify_file_bytes(dhd, memblock, start, len) != 0) { |
| if (retry++ < 5000) |
| { |
| fprintf(stderr, "%s: verify failed %d membytes " |
| "from 0x%08x\n", __FUNCTION__, len, start); |
| goto failed_retry; |
| } |
| } |
| } |
| |
| start += len; |
| tot_len += len; |
| } |
| return 0; |
| } |
| #endif /* BWL_FILESYSTEM_SUPPORT */ |
| |
| #ifdef PROP_TXSTATUS |
| static int |
| dhd_proptxstatusenable(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int flag = 0xdead; |
| int ret; |
| |
| if (argv[1]) { |
| flag = atoi(argv[1]); |
| ret = dhd_iovar_setint(dhd, cmd->name, flag); |
| } |
| else { |
| ret = dhd_iovar_getint(dhd, cmd->name, &flag); |
| if (ret >= 0) |
| printf("proptxstatus: %d\n", flag); |
| } |
| return ret; |
| } |
| |
| static int |
| dhd_proptxstatusmode(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int mode = 0xdead; |
| int ret; |
| |
| if (argv[1]) { |
| mode = atoi(argv[1]); |
| ret = dhd_iovar_setint(dhd, cmd->name, mode); |
| } |
| else { |
| ret = dhd_iovar_getint(dhd, cmd->name, &mode); |
| if (ret >= 0) |
| printf("proptxstatusmode: %d\n", mode); |
| } |
| return ret; |
| } |
| |
| static int |
| dhd_proptxopt(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int flag = 0xdead; |
| int ret; |
| |
| if (argv[1]) { |
| flag = atoi(argv[1]); |
| ret = dhd_iovar_setint(dhd, cmd->name, flag); |
| } |
| else { |
| ret = dhd_iovar_getint(dhd, cmd->name, &flag); |
| if (ret >= 0) |
| printf("proptx_opt: %d\n", flag); |
| } |
| return ret; |
| } |
| |
| #endif /* PROP_TXSTATUS */ |
| |
| static int |
| dhd_get_ramstart(void *dhd, uint32 *ramstart) |
| { |
| int ret; |
| char *ramstart_args[] = {"ramstart", NULL}; |
| |
| /* Read the bus type the DHD driver is associated to */ |
| if ((ret = dhd_var_get(dhd, NULL, ramstart_args)) != BCME_OK) { |
| fprintf(stderr, "%s: error obtaining ramstart\n", __FUNCTION__); |
| |
| return ret; |
| } |
| |
| *ramstart = *(uint32 *)buf; |
| |
| return BCME_OK; |
| } |
| |
| static int |
| dhd_download(void *dhd, cmd_t *cmd, char **argv) |
| { |
| #if !defined(BWL_FILESYSTEM_SUPPORT) |
| return (-1); |
| #else |
| bool reset = TRUE; |
| bool run = TRUE; |
| bool verify = FALSE; |
| char *fname = NULL; |
| char *vname = NULL; |
| uint32 start; |
| int ret = 0; |
| int fsize; |
| uint32 bustype; |
| long filepos; |
| |
| FILE *fp = NULL; |
| uint32 ramsize; |
| char *memszargs[] = { "ramsize", NULL }; |
| |
| char *bufp; |
| |
| miniopt_t opts; |
| int opt_err; |
| uint nvram_len; |
| struct trx_header trx_hdr; |
| uint32 trx_hdr_len; |
| bool trx_file = FALSE; |
| uint memblock_sz = MEMBLOCK; |
| bool embedded_ucode = FALSE; |
| |
| UNUSED_PARAMETER(cmd); |
| |
| if ((ret = dhd_get_ramstart(dhd, &start)) != BCME_OK) |
| goto exit; |
| |
| /* Parse command-line options */ |
| miniopt_init(&opts, "download", "", TRUE); |
| |
| argv++; |
| while ((opt_err = miniopt(&opts, argv)) != -1) { |
| if (opt_err == 1) { |
| fprintf(stderr, "download options error\n"); |
| ret = -1; |
| goto exit; |
| } |
| argv += opts.consumed; |
| |
| if (opts.opt == 'a') { |
| if (!opts.good_int) { |
| fprintf(stderr, "invalid address %s\n", opts.valstr); |
| ret = -1; |
| goto exit; |
| } |
| start = (uint32)opts.uval; |
| } else if (opts.positional) { |
| if (fname && vname) { |
| fprintf(stderr, "extra positional arg, %s\n", |
| opts.valstr); |
| ret = -1; |
| goto exit; |
| } |
| if (fname) |
| vname = opts.valstr; |
| else |
| fname = opts.valstr; |
| } else if (!opts.opt) { |
| if (!strcmp(opts.key, "noreset")) { |
| reset = FALSE; |
| } else if (!strcmp(opts.key, "norun")) { |
| run = FALSE; |
| } else if (!strcmp(opts.key, "verify")) { |
| verify = TRUE; |
| } else { |
| fprintf(stderr, "unrecognized option %s\n", opts.valstr); |
| ret = -1; |
| goto exit; |
| } |
| } else { |
| fprintf(stderr, "unrecognized option %c\n", opts.opt); |
| ret = -1; |
| goto exit; |
| } |
| } |
| |
| /* validate arguments */ |
| if (!fname) { |
| fprintf(stderr, "filename required\n"); |
| ret = -1; |
| goto exit; |
| } |
| |
| /* validate file size compared to memory size */ |
| if ((fsize = file_size(fname)) < 0) { |
| ret = -1; |
| goto exit; |
| } |
| /* read the file and push blocks down to memory */ |
| if ((fp = fopen(fname, "rb")) == NULL) { |
| fprintf(stderr, "%s: unable to open %s: %s\n", |
| __FUNCTION__, fname, strerror(errno)); |
| ret = -1; |
| goto exit; |
| } |
| /* Verify the file is a regular bin file or trx file */ |
| { |
| uint32 tmp_len; |
| trx_hdr_len = sizeof(struct trx_header); |
| tmp_len = fread(&trx_hdr, sizeof(uint8), trx_hdr_len, fp); |
| if (tmp_len == trx_hdr_len) { |
| if (trx_hdr.magic == TRX_MAGIC) { |
| trx_file = TRUE; |
| if (trx_hdr.flag_version & TRX_EMBED_UCODE) |
| embedded_ucode = TRUE; |
| } |
| else |
| fseek(fp, 0, SEEK_SET); |
| } |
| else |
| fseek(fp, 0, SEEK_SET); |
| } |
| |
| /* Check on which bus the dhd driver is sitting. Downloading methodology differs from |
| * USB to SDIO. |
| */ |
| { |
| char* bustype_args[] = {"bustype", NULL}; |
| |
| /* Read the bus type the DHD driver is associated to */ |
| if ((ret = dhd_var_get(dhd, NULL, bustype_args))) { |
| fprintf(stderr, "%s: error obtaining bustype\n", __FUNCTION__); |
| goto exit; |
| } |
| |
| bustype = *(uint32*)buf; |
| } |
| |
| if (trx_file) |
| fsize = (int)(trx_hdr.offsets[0]); |
| |
| if (bustype == BUS_TYPE_SDIO) { |
| if ((ret = dhd_var_get(dhd, NULL, memszargs))) { |
| fprintf(stderr, "%s: error obtaining ramsize\n", __FUNCTION__); |
| goto exit; |
| } |
| ramsize = *(uint32*)buf; |
| } |
| |
| |
| BCM_REFERENCE(ramsize); |
| |
| /* do the download reset if not suppressed */ |
| if (reset) { |
| if ((ret = dhd_iovar_setint(dhd, "dwnldstate", TRUE))) { |
| fprintf(stderr, "%s: failed to put dongle in download mode\n", |
| __FUNCTION__); |
| goto exit; |
| } |
| } |
| |
| #define RDL_CHUNK 1500 /* size of each dl transfer */ |
| |
| if (BUS_TYPE_USB == bustype) { |
| /* store the cur pos pointing to base image which should be written */ |
| filepos = ftell(fp); |
| if (filepos == -1) { |
| fprintf(stderr, "%s: ftell failed.\n", __FUNCTION__); |
| } |
| |
| /* In case of USB, we need to write header information also to dongle. */ |
| fseek(fp, 0, SEEK_SET); |
| |
| /* The file size is "base_image + TRX_Header_size" */ |
| fsize = (int)(trx_hdr.offsets[0] + sizeof(struct trx_header)); |
| |
| memblock_sz = RDL_CHUNK; |
| } |
| |
| |
| /* Load the ram image */ |
| if ((ret = dhd_load_file_bytes(dhd, cmd, fp, fsize, start, memblock_sz, verify))) { |
| fprintf(stderr, "%s: error loading the ramimage at addr 0x%x\n", |
| __FUNCTION__, start); |
| goto exit; |
| } |
| |
| if (trx_file) { |
| |
| filepos = ftell(fp); |
| if (filepos == -1) { |
| fprintf(stderr, "%s: ftell failed.\n", __FUNCTION__); |
| } |
| |
| if (BUS_TYPE_SDIO == bustype) { |
| |
| } |
| } |
| |
| fclose(fp); |
| fp = NULL; |
| |
| /* download the vars file if specified */ |
| if (vname) { |
| bufp = buf; |
| strcpy(bufp, "vars"); |
| bufp += strlen("vars") + 1; |
| |
| if ((ret = read_vars(vname, bufp, |
| DHD_IOCTL_MAXLEN - (strlen("vars") + 3))) < 0) { |
| ret = -1; |
| goto exit; |
| } |
| |
| nvram_len = ret; |
| bufp += nvram_len; |
| *bufp++ = 0; |
| |
| ret = dhd_set(dhd, DHD_SET_VAR, buf, (bufp - buf)); |
| if (ret) { |
| fprintf(stderr, "%s: error %d on delivering vars\n", |
| __FUNCTION__, ret); |
| goto exit; |
| } |
| } |
| |
| /* start running the downloaded code if not suppressed */ |
| if (run) { |
| if ((ret = dhd_iovar_setint(dhd, "dwnldstate", FALSE))) { |
| |
| fprintf(stderr, "%s: failed to take dongle out of download mode\n", |
| __FUNCTION__); |
| /* USB Error return values */ |
| if (BUS_TYPE_USB == bustype) { |
| if (ret == -1) |
| fprintf(stderr, "%s: CPU is not in RUNNABLE State\n", |
| __FUNCTION__); |
| else |
| fprintf(stderr, "%s: Error in setting CPU to RUN mode.\n", |
| __FUNCTION__); |
| } |
| goto exit; |
| } |
| } |
| if (embedded_ucode) { |
| } |
| |
| exit: |
| if (fp) |
| fclose(fp); |
| |
| return ret; |
| #endif /* BWL_FILESYSTEM_SUPPORT */ |
| } |
| |
| static int |
| dhd_dldn(void *dhd, cmd_t *cmd, char **argv) |
| { |
| #if !defined(BWL_FILESYSTEM_SUPPORT) |
| return (-1); |
| #else |
| char *fname = NULL; |
| uint32 start; |
| int ret = 0; |
| int fsize; |
| int fd = 0; |
| |
| FILE *fp = NULL; |
| uint32 ramsize; |
| |
| uint len; |
| uint8 memblock[MEMBLOCK]; |
| |
| miniopt_t opts; |
| int opt_err; |
| |
| UNUSED_PARAMETER(cmd); |
| |
| /* Parse command-line options */ |
| miniopt_init(&opts, "download", "", TRUE); |
| argv++; |
| |
| while ((opt_err = miniopt(&opts, argv)) != -1) { |
| if (opt_err == 1) { |
| fprintf(stderr, "download options error\n"); |
| ret = -1; |
| goto exit; |
| } |
| argv += opts.consumed; |
| |
| if (opts.positional) { |
| if (fname) { |
| fprintf(stderr, "extra positional arg, %s\n", |
| opts.valstr); |
| ret = -1; |
| goto exit; |
| } |
| if (!fname) |
| fname = opts.valstr; |
| } else { |
| fprintf(stderr, "unrecognized option %c\n", opts.opt); |
| ret = -1; |
| goto exit; |
| } |
| } |
| |
| fd = dhd_set(dhd, DHD_DLDN_ST, NULL, 0); |
| if (fd < 0) { |
| ret = -1; |
| goto exit; |
| } |
| |
| /* validate arguments */ |
| if (!fname) { |
| fprintf(stderr, "filename required\n"); |
| ret = -1; |
| goto exit; |
| } |
| |
| /* validate file size compared to memory size */ |
| if ((fsize = file_size(fname)) < 0) { |
| ret = -1; |
| goto exit; |
| } |
| |
| ramsize = 393216; |
| |
| if (ramsize && ((uint32)fsize > ramsize)) { |
| fprintf(stderr, "%s: file %s too large (%d > %d)\n", |
| __FUNCTION__, fname, fsize, ramsize); |
| ret = -1; |
| goto exit; |
| } |
| |
| /* read the file and push blocks down to memory */ |
| if ((fp = fopen(fname, "rb")) == NULL) { |
| fprintf(stderr, "%s: unable to open %s: %s\n", |
| __FUNCTION__, fname, strerror(errno)); |
| ret = -1; |
| goto exit; |
| } |
| |
| if ((ret = dhd_get_ramstart(dhd, &start)) != BCME_OK) |
| goto exit; |
| |
| while ((len = fread(memblock, sizeof(uint8), MEMBLOCK, fp))) { |
| if (len < MEMBLOCK && !feof(fp)) { |
| fprintf(stderr, "%s: error reading file %s\n", __FUNCTION__, fname); |
| ret = -1; |
| goto exit; |
| } |
| |
| ret = dhd_set(dhd, DHD_DLDN_WRITE, memblock, len); |
| if (ret) { |
| fprintf(stderr, "%s: error %d on writing %d membytes at 0x%08x\n", |
| __FUNCTION__, ret, len, start); |
| goto exit; |
| } |
| |
| start += len; |
| } |
| |
| if (!feof(fp)) { |
| fprintf(stderr, "%s: error reading file %s\n", __FUNCTION__, fname); |
| ret = -1; |
| goto exit; |
| } |
| fclose(fp); |
| fp = NULL; |
| |
| exit: |
| if (fp) |
| fclose(fp); |
| |
| if (fd) |
| ret = dhd_set(dhd, DHD_DLDN_END, NULL, 0); |
| |
| return ret; |
| #endif /* BWL_FILESYSTEM_SUPPORT */ |
| } |
| |
| static int |
| dhd_upload(void *dhd, cmd_t *cmd, char **argv) |
| { |
| #if !defined(BWL_FILESYSTEM_SUPPORT) |
| return (-1); |
| #else |
| char *fname = NULL; |
| uint32 start; |
| uint32 size = 0; |
| int ret = 0; |
| |
| FILE *fp; |
| uint32 ramsize; |
| char *memszargs[] = { "ramsize", NULL }; |
| |
| uint len; |
| |
| miniopt_t opts; |
| int opt_err; |
| |
| UNUSED_PARAMETER(cmd); |
| UNUSED_PARAMETER(argv); |
| |
| if ((ret = dhd_get_ramstart(dhd, &start)) != BCME_OK) |
| goto exit; |
| |
| /* Parse command-line options */ |
| miniopt_init(&opts, "upload", "", TRUE); |
| |
| argv++; |
| while ((opt_err = miniopt(&opts, argv)) != -1) { |
| if (opt_err == 1) { |
| fprintf(stderr, "upload options error\n"); |
| ret = -1; |
| goto exit; |
| } |
| argv += opts.consumed; |
| |
| if (opts.opt == 'a') { |
| if (!opts.good_int) { |
| fprintf(stderr, "invalid address %s\n", opts.valstr); |
| ret = -1; |
| goto exit; |
| } |
| start = (uint32)opts.uval; |
| } else if (opts.positional) { |
| if (!fname) { |
| fname = opts.valstr; |
| } else if (opts.good_int) { |
| size = (uint32)opts.uval; |
| } else { |
| fprintf(stderr, "upload options error\n"); |
| ret = -1; |
| goto exit; |
| } |
| } else if (!opts.opt) { |
| fprintf(stderr, "unrecognized option %s\n", opts.valstr); |
| ret = -1; |
| goto exit; |
| } else { |
| fprintf(stderr, "unrecognized option %c\n", opts.opt); |
| ret = -1; |
| goto exit; |
| } |
| } |
| |
| /* validate arguments */ |
| if (!fname) { |
| fprintf(stderr, "filename required\n"); |
| ret = -1; |
| goto exit; |
| } |
| |
| if ((ret = dhd_var_get(dhd, NULL, memszargs))) { |
| fprintf(stderr, "%s: error obtaining ramsize\n", __FUNCTION__); |
| goto exit; |
| } |
| ramsize = *(uint32*)buf; |
| |
| if (!ramsize) |
| ramsize = start + size; |
| |
| if ((fp = fopen(fname, "wb")) == NULL) { |
| fprintf(stderr, "%s: Could not open %s: %s\n", |
| __FUNCTION__, fname, strerror(errno)); |
| ret = -1; |
| goto exit; |
| } |
| |
| /* default size to full RAM */ |
| if (!size) |
| size = ramsize - start; |
| |
| /* read memory and write to file */ |
| while (size) { |
| char *ptr; |
| int params[2]; |
| |
| len = MIN(MEMBLOCK, size); |
| |
| params[0] = start; |
| params[1] = len; |
| ret = dhd_var_getbuf(dhd, "membytes", params, 2 * sizeof(int), (void**)&ptr); |
| if (ret) { |
| fprintf(stderr, "%s: failed reading %d membytes from 0x%08x\n", |
| __FUNCTION__, len, start); |
| break; |
| } |
| |
| if (fwrite(ptr, sizeof(char), len, fp) != len) { |
| fprintf(stderr, "%s: error writing to file %s\n", __FUNCTION__, fname); |
| ret = -1; |
| break; |
| } |
| |
| start += len; |
| size -= len; |
| } |
| |
| fclose(fp); |
| exit: |
| return ret; |
| #endif /* BWL_FILESYSTEM_SUPPORT */ |
| } |
| |
| #ifdef BWL_FILESYSTEM_SUPPORT |
| static int |
| dhd_get_debug_info(void *dhd, hndrte_debug_t *debug_info) |
| { |
| int i; |
| int ret; |
| int params[2]; |
| |
| uint32 *buffer; |
| uint32 debug_info_ptr; |
| uint32 ramstart; |
| |
| if ((ret = dhd_get_ramstart(dhd, &ramstart)) != BCME_OK) |
| return ret; |
| |
| /* |
| * Different chips have different fixed debug_info_ptrs |
| * because of different ROM locations/uses. Try them all looking |
| * for the magic number. |
| */ |
| for (i = 0; ; i++) { |
| if (debug_info_ptrs[i] == DEBUG_INFO_PTRS_END) { |
| fprintf(stderr, "Error: cannot find pointer to debug_info\n"); |
| return -1; |
| } |
| |
| params[0] = debug_info_ptrs[i] + ramstart; |
| params[1] = 8; |
| ret = dhd_var_getbuf(dhd, "membytes", params, 2 * sizeof(int), (void**)&buffer); |
| if ((ret == 0) && |
| (*buffer == HNDRTE_DEBUG_PTR_PTR_MAGIC)) { |
| break; |
| } |
| } |
| |
| debug_info_ptr = *(buffer + 1); |
| if (debug_info_ptr == 0) { |
| fprintf(stderr, "Error: Debug info pointer is zero\n"); |
| return -1; |
| } |
| |
| /* Read the area the debuginfoptr points at */ |
| params[0] = debug_info_ptr; |
| params[1] = sizeof(hndrte_debug_t); |
| ret = dhd_var_getbuf(dhd, "membytes", params, 2 * sizeof(int), (void**)&buffer); |
| if (ret) { |
| fprintf(stderr, "%s: failed reading %lu membytes from 0x%08lx\n", |
| __FUNCTION__, (long unsigned) params[1], (long unsigned) params[0]); |
| return ret; |
| } |
| |
| memcpy((char *) debug_info, buffer, sizeof(hndrte_debug_t)); |
| |
| /* Sanity check the area */ |
| if ((debug_info->magic != HNDRTE_DEBUG_MAGIC) || |
| (debug_info->version != HNDRTE_DEBUG_VERSION)) { |
| fprintf(stderr, "Error: Invalid debug info area\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| #endif /* BWL_FILESYSTEM_SUPPORT */ |
| |
| static int |
| dhd_coredump(void *dhd, cmd_t *cmd, char **argv) |
| { |
| #if !defined(BWL_FILESYSTEM_SUPPORT) |
| return (-1); |
| #else |
| char *fname = NULL; |
| int ret; |
| |
| FILE *fp; |
| |
| hndrte_debug_t debugInfo; |
| |
| miniopt_t opts; |
| int opt_err; |
| |
| int params[2]; |
| char *ptr; |
| |
| unsigned int start; |
| unsigned int size; |
| |
| prstatus_t prstatus; |
| |
| UNUSED_PARAMETER(cmd); |
| UNUSED_PARAMETER(argv); |
| |
| /* Parse command-line options */ |
| miniopt_init(&opts, "dump", "", TRUE); |
| |
| argv++; |
| while ((opt_err = miniopt(&opts, argv)) != -1) { |
| if (opt_err == 1) { |
| fprintf(stderr, "dump options error\n"); |
| ret = -1; |
| goto exit; |
| } |
| argv += opts.consumed; |
| |
| if (opts.positional) { |
| if (!fname) { |
| fname = opts.valstr; |
| } else { |
| fprintf(stderr, "dump options error\n"); |
| ret = -1; |
| goto exit; |
| } |
| } else if (!opts.opt) { |
| fprintf(stderr, "unrecognized option %s\n", opts.valstr); |
| ret = -1; |
| goto exit; |
| } else { |
| fprintf(stderr, "unrecognized option %c\n", opts.opt); |
| ret = -1; |
| goto exit; |
| } |
| } |
| |
| /* validate arguments */ |
| if (!fname) { |
| fprintf(stderr, "filename required\n"); |
| ret = -1; |
| goto exit; |
| } |
| |
| if ((ret = dhd_get_debug_info(dhd, &debugInfo)) < 0) |
| goto exit; |
| |
| /* Get the base and size to dump */ |
| start = debugInfo.ram_base; |
| size = debugInfo.ram_size; |
| |
| /* Get the arm trap area */ |
| bzero(&prstatus, sizeof(prstatus_t)); |
| if (debugInfo.trap_ptr != 0) { |
| int i; |
| trap_t armtrap; |
| uint32 *reg; |
| |
| params[0] = debugInfo.trap_ptr; |
| params[1] = sizeof(trap_t); |
| ret = dhd_var_getbuf(dhd, "membytes", params, 2 * sizeof(int), (void**)&ptr); |
| if (ret) { |
| fprintf(stderr, "%s: failed reading %lu membytes from 0x%08lx\n", |
| __FUNCTION__, (long unsigned) params[1], (long unsigned) params[0]); |
| goto exit; |
| } |
| |
| memcpy((char *) &armtrap, ptr, sizeof(trap_t)); |
| |
| /* Populate the prstatus */ |
| prstatus.si_signo = armtrap.type; |
| reg = &armtrap.r0; |
| for (i = 0; i < 15; i++, reg++) { |
| prstatus.uregs[i] = *reg; |
| } |
| prstatus.uregs[15] = armtrap.epc; |
| } |
| |
| if ((fp = fopen(fname, "wb")) == NULL) { |
| fprintf(stderr, "%s: Could not open %s: %s\n", |
| __FUNCTION__, fname, strerror(errno)); |
| ret = -1; |
| goto exit; |
| } |
| |
| /* Write the preamble and debug header */ |
| fprintf(fp, "Dump starts for version %s FWID 01-%x\n", debugInfo.epivers, debugInfo.fwid); |
| fprintf(fp, "XXXXXXXXXXXXXXXXXXXX"); |
| fprintf(fp, "%8.8lX", (long unsigned) sizeof(debugInfo)); |
| if (fwrite(&debugInfo, sizeof(unsigned char), sizeof(debugInfo), fp) != sizeof(debugInfo)) { |
| fprintf(stderr, "%s: error writing to file %s\n", __FUNCTION__, fname); |
| ret = -1; |
| fclose(fp); |
| goto exit; |
| } |
| |
| /* Write the prstatus */ |
| if (fwrite(&prstatus, sizeof(unsigned char), sizeof(prstatus), fp) != sizeof(prstatus)) { |
| fprintf(stderr, "%s: error writing to file %s\n", __FUNCTION__, fname); |
| ret = -1; |
| fclose(fp); |
| goto exit; |
| } |
| |
| /* Write the ram size as another sanity check */ |
| fprintf(fp, "%8.8X", size); |
| |
| /* read memory and write to file */ |
| while (size) { |
| int len; |
| len = MIN(MEMBLOCK, size); |
| |
| params[0] = start; |
| params[1] = len; |
| ret = dhd_var_getbuf(dhd, "membytes", params, 2 * sizeof(int), (void**)&ptr); |
| if (ret) { |
| fprintf(stderr, "%s: failed reading %d membytes from 0x%08x\n", |
| __FUNCTION__, len, start); |
| break; |
| } |
| |
| if (fwrite(ptr, sizeof(char), len, fp) != (uint) len) { |
| fprintf(stderr, "%s: error writing to file %s\n", __FUNCTION__, fname); |
| ret = -1; |
| break; |
| } |
| |
| start += len; |
| size -= len; |
| } |
| |
| fclose(fp); |
| exit: |
| return ret; |
| #endif /* BWL_FILESYSTEM_SUPPORT */ |
| } |
| |
| static int |
| dhd_consoledump(void *dhd, cmd_t *cmd, char **argv) |
| { |
| #if !defined(BWL_FILESYSTEM_SUPPORT) |
| return (-1); |
| #else |
| int ret; |
| |
| hndrte_debug_t debugInfo; |
| |
| miniopt_t opts; |
| int opt_err; |
| |
| int params[2]; |
| char *ptr; |
| |
| unsigned int start; |
| unsigned int size; |
| int len; |
| |
| UNUSED_PARAMETER(cmd); |
| UNUSED_PARAMETER(argv); |
| |
| /* Parse command-line options */ |
| miniopt_init(&opts, "consoledump", "", TRUE); |
| |
| argv++; |
| while ((opt_err = miniopt(&opts, argv)) != -1) { |
| if (opt_err == 1) { |
| fprintf(stderr, "dump options error\n"); |
| ret = -1; |
| goto exit; |
| } |
| argv += opts.consumed; |
| |
| if (!opts.opt) { |
| fprintf(stderr, "unrecognized option %s\n", opts.valstr); |
| ret = -1; |
| goto exit; |
| } else { |
| fprintf(stderr, "unrecognized option %c\n", opts.opt); |
| ret = -1; |
| goto exit; |
| } |
| } |
| |
| if ((ret = dhd_get_debug_info(dhd, &debugInfo)) < 0) |
| goto exit; |
| |
| if (debugInfo.console <= debugInfo.ram_base) { |
| fprintf(stderr, "%s: console not found\n", __FUNCTION__); |
| ret = -1; |
| goto exit; |
| } |
| |
| /* Get the debug console area */ |
| params[0] = debugInfo.console; |
| params[1] = sizeof(hndrte_cons_t); |
| ret = dhd_var_getbuf(dhd, "membytes", params, 2 * sizeof(int), (void**)&ptr); |
| if (ret) { |
| fprintf(stderr, "%s: failed reading %lu membytes from 0x%08lx\n", |
| __FUNCTION__, (long unsigned) params[1], (long unsigned) params[0]); |
| goto exit; |
| } |
| |
| if (ptr == NULL) { |
| fprintf(stderr, "%s: console not initialised\n", __FUNCTION__); |
| ret = -1; |
| goto exit; |
| } |
| |
| start = (unsigned int)((hndrte_cons_t *)ptr)->log.buf; |
| size = ((hndrte_cons_t *)ptr)->log.buf_size; |
| |
| if (start <= debugInfo.ram_base) { |
| fprintf(stderr, "%s: console buffer not initialised\n", __FUNCTION__); |
| ret = -1; |
| goto exit; |
| } |
| |
| /* read memory and write to file */ |
| while (size > 0) { |
| len = MIN(MEMBLOCK, size); |
| |
| params[0] = start; |
| params[1] = len; |
| ret = dhd_var_getbuf(dhd, "membytes", params, 2 * sizeof(int), (void**)&ptr); |
| if (ret) { |
| fprintf(stderr, "%s: failed reading %d membytes from 0x%08x\n", |
| __FUNCTION__, len, start); |
| break; |
| } |
| |
| printf("%s", ptr); |
| |
| start += len; |
| size -= len; |
| } |
| |
| exit: |
| return ret; |
| #endif /* BWL_FILESYSTEM_SUPPORT */ |
| } |
| |
| static int |
| dhd_logstamp(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int ret; |
| char *endptr = NULL; |
| uint argc; |
| int valn[2] = {0, 0}; |
| |
| /* arg count */ |
| for (argc = 0; argv[argc]; argc++); |
| argc--; argv++; |
| |
| if (argc > 2) |
| return BCME_USAGE_ERROR; |
| |
| if (argc) { |
| valn[0] = strtol(argv[0], &endptr, 0); |
| if (*endptr != '\0') { |
| printf("bad val1: %s\n", argv[0]); |
| return BCME_USAGE_ERROR; |
| } |
| } |
| |
| if (argc > 1) { |
| valn[1] = strtol(argv[1], &endptr, 0); |
| if (*endptr != '\0') { |
| printf("bad val2: %s\n", argv[1]); |
| return BCME_USAGE_ERROR; |
| } |
| } |
| |
| ret = dhd_var_setbuf(dhd, cmd->name, valn, argc * sizeof(int)); |
| |
| return (ret); |
| } |
| |
| static int |
| dhd_sd_reg(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int ret; |
| sdreg_t sdreg; |
| char *endptr = NULL; |
| uint argc; |
| void *ptr = NULL; |
| |
| bzero(&sdreg, sizeof(sdreg)); |
| |
| /* arg count */ |
| for (argc = 0; argv[argc]; argc++); |
| argc--; |
| |
| /* hostreg: offset [value]; devreg: func offset [value] */ |
| if (!strcmp(cmd->name, "sd_hostreg")) { |
| argv++; |
| if (argc < 1) { |
| printf("required args: offset [value]\n"); |
| return BCME_USAGE_ERROR; |
| } |
| |
| } else if (!strcmp(cmd->name, "sd_devreg")) { |
| argv++; |
| if (argc < 2) { |
| printf("required args: func offset [value]\n"); |
| return BCME_USAGE_ERROR; |
| } |
| |
| sdreg.func = strtoul(*argv++, &endptr, 0); |
| if (*endptr != '\0') { |
| printf("Invalid function number\n"); |
| return BCME_USAGE_ERROR; |
| } |
| } else { |
| return BCME_USAGE_ERROR; |
| } |
| |
| sdreg.offset = strtoul(*argv++, &endptr, 0); |
| if (*endptr != '\0') { |
| printf("Invalid offset value\n"); |
| return BCME_USAGE_ERROR; |
| } |
| |
| /* third arg: value */ |
| if (*argv) { |
| sdreg.value = strtoul(*argv, &endptr, 0); |
| if (*endptr != '\0') { |
| printf("Invalid value\n"); |
| return BCME_USAGE_ERROR; |
| } |
| } |
| |
| /* no third arg means get, otherwise set */ |
| if (!*argv) { |
| if ((ret = dhd_var_getbuf(dhd, cmd->name, &sdreg, sizeof(sdreg), &ptr)) >= 0) |
| printf("0x%x\n", *(int *)ptr); |
| } else { |
| ret = dhd_var_setbuf(dhd, cmd->name, &sdreg, sizeof(sdreg)); |
| } |
| |
| return (ret); |
| } |
| |
| static dbg_msg_t dhd_msgs[] = { |
| {DHD_ERROR_VAL, "error"}, |
| {DHD_ERROR_VAL, "err"}, |
| {DHD_TRACE_VAL, "trace"}, |
| {DHD_INFO_VAL, "inform"}, |
| {DHD_INFO_VAL, "info"}, |
| {DHD_INFO_VAL, "inf"}, |
| {DHD_DATA_VAL, "data"}, |
| {DHD_CTL_VAL, "ctl"}, |
| {DHD_TIMER_VAL, "timer"}, |
| {DHD_HDRS_VAL, "hdrs"}, |
| {DHD_BYTES_VAL, "bytes"}, |
| {DHD_INTR_VAL, "intr"}, |
| {DHD_LOG_VAL, "log"}, |
| {DHD_GLOM_VAL, "glom"}, |
| {DHD_EVENT_VAL, "event"}, |
| {DHD_BTA_VAL, "bta"}, |
| {DHD_ISCAN_VAL, "iscan"}, |
| {DHD_ARPOE_VAL, "arpoe"}, |
| {DHD_REORDER_VAL, "reorder"}, |
| {0, NULL} |
| }; |
| |
| static int |
| dhd_msglevel(void *dhd, cmd_t *cmd, char **argv) |
| { |
| return dhd_do_msglevel(dhd, cmd, argv, dhd_msgs); |
| } |
| |
| static int |
| dhd_do_msglevel(void *dhd, cmd_t *cmd, char **argv, dbg_msg_t *dbg_msg) |
| { |
| int ret, i; |
| uint val, last_val = 0, msglevel = 0, msglevel_add = 0, msglevel_del = 0; |
| char *endptr = NULL; |
| |
| if ((ret = dhd_iovar_getint(dhd, cmd->name, (int*)&msglevel)) < 0) |
| return (ret); |
| |
| if (!*++argv) { |
| printf("0x%x ", msglevel); |
| for (i = 0; (val = dbg_msg[i].value); i++) { |
| if ((msglevel & val) && (val != last_val)) |
| printf(" %s", dbg_msg[i].string); |
| last_val = val; |
| } |
| printf("\n"); |
| return (0); |
| } |
| |
| while (*argv) { |
| char *s = *argv; |
| if (*s == '+' || *s == '-') |
| s++; |
| else |
| msglevel_del = ~0; /* make the whole list absolute */ |
| val = strtoul(s, &endptr, 0); |
| /* not a plain integer if not all the string was parsed by strtoul */ |
| if (*endptr != '\0') { |
| for (i = 0; (val = dbg_msg[i].value); i++) |
| if (stricmp(dbg_msg[i].string, s) == 0) |
| break; |
| if (!val) |
| goto usage; |
| } |
| if (**argv == '-') |
| msglevel_del |= val; |
| else |
| msglevel_add |= val; |
| ++argv; |
| } |
| |
| msglevel &= ~msglevel_del; |
| msglevel |= msglevel_add; |
| |
| return (dhd_iovar_setint(dhd, cmd->name, msglevel)); |
| |
| usage: |
| fprintf(stderr, "msg values may be a list of numbers or names from the following set.\n"); |
| fprintf(stderr, "Use a + or - prefix to make an incremental change."); |
| |
| for (i = 0; (val = dbg_msg[i].value); i++) { |
| if (val != last_val) |
| fprintf(stderr, "\n0x%04x %s", val, dbg_msg[i].string); |
| else |
| fprintf(stderr, ", %s", dbg_msg[i].string); |
| last_val = val; |
| } |
| fprintf(stderr, "\n"); |
| |
| return 0; |
| } |
| |
| static char * |
| ver2str(unsigned int vms, unsigned int vls) |
| { |
| static char verstr[100]; |
| unsigned int maj, year, month, day, build; |
| |
| maj = (vms >> 16) & 0xFFFF; |
| if (maj > 1000) { |
| /* it is probably a date... */ |
| year = (vms >> 16) & 0xFFFF; |
| month = vms & 0xFFFF; |
| day = (vls >> 16) & 0xFFFF; |
| build = vls & 0xFFFF; |
| sprintf(verstr, "%d/%d/%d build %d", |
| month, day, year, build); |
| } else { |
| /* it is a tagged release. */ |
| sprintf(verstr, "%d.%d RC%d.%d", |
| (vms>>16)&0xFFFF, vms&0xFFFF, |
| (vls>>16)&0xFFFF, vls&0xFFFF); |
| } |
| return verstr; |
| } |
| |
| static int |
| dhd_version(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int ret; |
| char *ptr; |
| |
| UNUSED_PARAMETER(cmd); |
| UNUSED_PARAMETER(argv); |
| |
| /* Display the application version info */ |
| printf("%s: %s\n", dhdu_av0, |
| ver2str((EPI_MAJOR_VERSION << 16)| EPI_MINOR_VERSION, |
| (EPI_RC_NUMBER << 16) | EPI_INCREMENTAL_NUMBER)); |
| |
| if ((ret = dhd_var_getbuf(dhd, cmd->name, NULL, 0, (void**)&ptr)) < 0) |
| return ret; |
| |
| /* Display the returned string */ |
| printf("%s\n", ptr); |
| |
| return 0; |
| } |
| |
| static int |
| dhd_var_setint(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int32 val; |
| int len; |
| char *varname; |
| char *endptr = NULL; |
| char *p; |
| |
| if (cmd->set == -1) { |
| printf("set not defined for %s\n", cmd->name); |
| return BCME_ERROR; |
| } |
| |
| if (!*argv) { |
| printf("set: missing arguments\n"); |
| return BCME_USAGE_ERROR; |
| } |
| |
| varname = *argv++; |
| |
| if (!*argv) { |
| printf("set: missing value argument for set of \"%s\"\n", varname); |
| return BCME_USAGE_ERROR; |
| } |
| |
| val = strtol(*argv, &endptr, 0); |
| if (*endptr != '\0') { |
| /* not all the value string was parsed by strtol */ |
| printf("set: error parsing value \"%s\" as an integer for set of \"%s\"\n", |
| *argv, varname); |
| return BCME_USAGE_ERROR; |
| } |
| |
| strcpy(buf, varname); |
| p = buf; |
| while (*p != '\0') { |
| *p = tolower(*p); |
| p++; |
| } |
| |
| /* skip the NUL */ |
| p++; |
| |
| memcpy(p, &val, sizeof(uint)); |
| len = (p - buf) + sizeof(uint); |
| |
| return (dhd_set(dhd, DHD_SET_VAR, &buf[0], len)); |
| } |
| |
| static int |
| dhd_var_get(void *dhd, cmd_t *cmd, char **argv) |
| { |
| char *varname; |
| char *p; |
| |
| UNUSED_PARAMETER(cmd); |
| |
| if (!*argv) { |
| printf("get: missing arguments\n"); |
| return BCME_USAGE_ERROR; |
| } |
| |
| varname = *argv++; |
| |
| if (*argv) { |
| printf("get: error, extra arg \"%s\"\n", *argv); |
| return BCME_USAGE_ERROR; |
| } |
| |
| strcpy(buf, varname); |
| p = buf; |
| while (*p != '\0') { |
| *p = tolower(*p); |
| p++; |
| } |
| return (dhd_get(dhd, DHD_GET_VAR, &buf[0], DHD_IOCTL_MAXLEN)); |
| } |
| |
| static int |
| dhd_var_getint(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int err; |
| int32 val; |
| if (cmd->get == -1) { |
| printf("get not defined for %s\n", cmd->name); |
| return BCME_ERROR; |
| } |
| |
| if ((err = dhd_var_get(dhd, cmd, argv))) |
| return (err); |
| |
| val = *(int32*)buf; |
| |
| if (val < 10) |
| printf("%d\n", val); |
| else |
| printf("%d (0x%x)\n", val, val); |
| |
| return (0); |
| } |
| |
| static int |
| dhd_var_getandprintstr(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int err; |
| |
| if ((err = dhd_var_get(dhd, cmd, argv))) |
| return (err); |
| |
| printf("%s\n", buf); |
| return (0); |
| } |
| |
| |
| void |
| dhd_printlasterror(void *dhd) |
| { |
| char *cmd[2] = {"bcmerrorstr"}; |
| |
| if (dhd_var_get(dhd, NULL, cmd) != 0) { |
| fprintf(stderr, "%s: \nError getting the last error\n", dhdu_av0); |
| } else { |
| fprintf(stderr, "%s: %s\n", dhdu_av0, buf); |
| } |
| } |
| |
| static int |
| dhd_varint(void *dhd, cmd_t *cmd, char *argv[]) |
| { |
| if (argv[1]) |
| return (dhd_var_setint(dhd, cmd, argv)); |
| else |
| return (dhd_var_getint(dhd, cmd, argv)); |
| } |
| |
| static int |
| dhd_var_getbuf(void *dhd, char *iovar, void *param, int param_len, void **bufptr) |
| { |
| int len; |
| |
| memset(buf, 0, DHD_IOCTL_MAXLEN); |
| strcpy(buf, iovar); |
| |
| /* include the NUL */ |
| len = strlen(iovar) + 1; |
| |
| if (param_len) |
| memcpy(&buf[len], param, param_len); |
| |
| *bufptr = buf; |
| |
| return dhd_get(dhd, DHD_GET_VAR, &buf[0], DHD_IOCTL_MAXLEN); |
| } |
| |
| static int |
| dhd_var_setbuf(void *dhd, char *iovar, void *param, int param_len) |
| { |
| int len; |
| |
| memset(buf, 0, DHD_IOCTL_MAXLEN); |
| strcpy(buf, iovar); |
| |
| /* include the NUL */ |
| len = strlen(iovar) + 1; |
| |
| if (param_len) |
| memcpy(&buf[len], param, param_len); |
| |
| len += param_len; |
| |
| return dhd_set(dhd, DHD_SET_VAR, &buf[0], len); |
| } |
| |
| static int |
| dhd_var_void(void *dhd, cmd_t *cmd, char **argv) |
| { |
| UNUSED_PARAMETER(argv); |
| |
| if (cmd->set < 0) |
| return BCME_ERROR; |
| |
| return dhd_var_setbuf(dhd, cmd->name, NULL, 0); |
| } |
| |
| /* |
| * format an iovar buffer |
| */ |
| static uint |
| dhd_iovar_mkbuf(char *name, char *data, uint datalen, char *buf, uint buflen, int *perr) |
| { |
| uint len; |
| |
| len = strlen(name) + 1; |
| |
| /* check for overflow */ |
| if ((len + datalen) > buflen) { |
| *perr = BCME_BUFTOOSHORT; |
| return 0; |
| } |
| |
| strcpy(buf, name); |
| |
| /* append data onto the end of the name string */ |
| if (datalen > 0) |
| memcpy(&buf[len], data, datalen); |
| |
| len += datalen; |
| |
| *perr = 0; |
| return len; |
| } |
| |
| static int |
| dhd_iovar_getint(void *dhd, char *name, int *var) |
| { |
| char ibuf[DHD_IOCTL_SMLEN]; |
| int error; |
| |
| dhd_iovar_mkbuf(name, NULL, 0, ibuf, sizeof(ibuf), &error); |
| if (error) |
| return error; |
| |
| if ((error = dhd_get(dhd, DHD_GET_VAR, &ibuf, sizeof(ibuf))) < 0) |
| return error; |
| |
| memcpy(var, ibuf, sizeof(int)); |
| |
| return 0; |
| } |
| |
| static int |
| dhd_iovar_setint(void *dhd, char *name, int var) |
| { |
| int len; |
| char ibuf[DHD_IOCTL_SMLEN]; |
| int error; |
| |
| len = dhd_iovar_mkbuf(name, (char *)&var, sizeof(var), ibuf, sizeof(ibuf), &error); |
| if (error) |
| return error; |
| |
| if ((error = dhd_set(dhd, DHD_SET_VAR, &ibuf, len)) < 0) |
| return error; |
| |
| return 0; |
| } |
| |
| static int |
| dhd_varstr(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int error; |
| char *str; |
| |
| if (!*++argv) { |
| void *ptr; |
| |
| if ((error = dhd_var_getbuf(dhd, cmd->name, NULL, 0, &ptr)) < 0) |
| return (error); |
| |
| str = (char *)ptr; |
| printf("%s\n", str); |
| return (0); |
| } else { |
| str = *argv; |
| /* iovar buffer length includes NUL */ |
| return dhd_var_setbuf(dhd, cmd->name, str, strlen(str) + 1); |
| } |
| } |
| |
| |
| static int |
| dhd_hostreorder_flows(void *dhd, cmd_t *cmd, char **argv) |
| { |
| int ret, count, i = 0; |
| void *ptr; |
| uint8 *flow_id; |
| |
| |
| if ((ret = dhd_var_getbuf(dhd, cmd->name, NULL, 0, &ptr)) < 0) { |
| printf("error getting reorder flows from the host\n"); |
| return ret; |
| } |
| flow_id = (uint8 *)ptr; |
| count = *flow_id; |
| if (!count) |
| printf("there are no active flows\n"); |
| else { |
| printf("flows(%d): \t", count); |
| while (i++ < count) |
| printf("%d ", *flow_id++); |
| printf("\n"); |
| } |
| return 0; |
| } |
| |
| |
| |
| /* These two utility functions are used by dhdu_linux.c |
| * The code is taken from wlu.c. |
| */ |
| int |
| dhd_atoip(const char *a, struct ipv4_addr *n) |
| { |
| char *c; |
| int i = 0; |
| |
| for (;;) { |
| n->addr[i++] = (uint8)strtoul(a, &c, 0); |
| if (*c++ != '.' || i == IPV4_ADDR_LEN) |
| break; |
| a = c; |
| } |
| return (i == IPV4_ADDR_LEN); |
| } |
| |
| int |
| dhd_ether_atoe(const char *a, struct ether_addr *n) |
| { |
| char *c; |
| int i = 0; |
| |
| memset(n, 0, ETHER_ADDR_LEN); |
| for (;;) { |
| n->octet[i++] = (uint8)strtoul(a, &c, 16); |
| if (!*c++ || i == ETHER_ADDR_LEN) |
| break; |
| a = c; |
| } |
| return (i == ETHER_ADDR_LEN); |
| } |